| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
|
|
The single instance in which we use this function doesn't actually need to
change VMA flags, so remove this parameter and update the caller
accordingly.
[lorenzo.stoakes@oracle.com: correct comment]
Link: https://lkml.kernel.org/r/77f45b2e-a748-4635-9381-a5051091087f@lucifer.local
Link: https://lkml.kernel.org/r/20250714135839.178032-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The core kernel code is currently very inconsistent in its use of
vm_flags_t vs. unsigned long. This prevents us from changing the type of
vm_flags_t in the future and is simply not correct, so correct this.
While this results in rather a lot of churn, it is a critical
pre-requisite for a future planned change to VMA flag type.
Additionally, update VMA userland tests to account for the changes.
To make review easier and to break things into smaller parts, driver and
architecture-specific changes is left for a subsequent commit.
The code has been adjusted to cascade the changes across all calling code
as far as is needed.
We will adjust architecture-specific and driver code in a subsequent patch.
Overall, this patch does not introduce any functional change.
Link: https://lkml.kernel.org/r/d1588e7bb96d1ea3fe7b9df2c699d5b4592d901d.1750274467.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Kees Cook <kees@kernel.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In commit 3a75ccba047b ("mm: simplify vma merge structure and expand
comments") we introduced the vmg->target field to make the merging of
existing VMAs simpler - clarifying precisely which VMA would eventually
become the merged VMA once the merge operation was complete.
New VMA merging did not get quite the same treatment, retaining the rather
confusing convention of storing the target VMA in vmg->middle.
This patch corrects this state of affairs, utilising vmg->target for this
purpose for both vma_merge_new_range() and also for vma_expand().
We retain the WARN_ON for vmg->middle being specified in
vma_merge_new_range() as doing so would make no sense, but add an
additional debug assert for setting vmg->target.
This patch additionally updates VMA userland testing to account for this
change.
[lorenzo.stoakes@oracle.com: make comment consistent in vma_expand()]
Link: https://lkml.kernel.org/r/c54f45e3-a6ac-4749-93c0-cc9e3080ee37@lucifer.local
Link: https://lkml.kernel.org/r/20250613184807.108089-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If a user wishes to enable KSM mergeability for an entire process and all
fork/exec'd processes that come after it, they use the prctl()
PR_SET_MEMORY_MERGE operation.
This defaults all newly mapped VMAs to have the VM_MERGEABLE VMA flag set
(in order to indicate they are KSM mergeable), as well as setting this
flag for all existing VMAs and propagating this across fork/exec.
However it also breaks VMA merging for new VMAs, both in the process and
all forked (and fork/exec'd) child processes.
This is because when a new mapping is proposed, the flags specified will
never have VM_MERGEABLE set. However all adjacent VMAs will already have
VM_MERGEABLE set, rendering VMAs unmergeable by default.
To work around this, we try to set the VM_MERGEABLE flag prior to
attempting a merge. In the case of brk() this can always be done.
However on mmap() things are more complicated - while KSM is not supported
for MAP_SHARED file-backed mappings, it is supported for MAP_PRIVATE
file-backed mappings.
These mappings may have deprecated .mmap() callbacks specified which
could, in theory, adjust flags and thus KSM eligibility.
So we check to determine whether this is possible. If not, we set
VM_MERGEABLE prior to the merge attempt on mmap(), otherwise we retain the
previous behaviour.
This fixes VMA merging for all new anonymous mappings, which covers the
majority of real-world cases, so we should see a significant improvement
in VMA mergeability.
For MAP_PRIVATE file-backed mappings, those which implement the
.mmap_prepare() hook and shmem are both known to be safe, so we allow
these, disallowing all other cases.
Also add stubs for newly introduced function invocations to VMA userland
testing.
[lorenzo.stoakes@oracle.com: correctly invoke late KSM check after mmap hook]
Link: https://lkml.kernel.org/r/5861f8f6-cf5a-4d82-a062-139fb3f9cddb@lucifer.local
Link: https://lkml.kernel.org/r/3ba660af716d87a18ca5b4e635f2101edeb56340.1748537921.git.lorenzo.stoakes@oracle.com
Fixes: d7597f59d1d3 ("mm: add new api to enable ksm per process") # please no backport!
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Xu Xin <xu.xin16@zte.com.cn>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The call_mmap() function violates the existing convention in
include/linux/fs.h whereby invocations of virtual file system hooks is
performed by functions prefixed with vfs_xxx().
Correct this by renaming call_mmap() to vfs_mmap(). This also avoids
confusion as to the fact that f_op->mmap_prepare may be invoked here.
Also rename __call_mmap_prepare() function to vfs_mmap_prepare() and adjust
to accept a file parameter, this is useful later for nested file systems.
Finally, fix up the VMA userland tests and ensure the mmap_prepare -> mmap
shim is implemented there.
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/8d389f4994fa736aa8f9172bef8533c10a9e9011.1750099179.git.lorenzo.stoakes@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Nested file systems, that is those which invoke call_mmap() within their
own f_op->mmap() handlers, may encounter underlying file systems which
provide the f_op->mmap_prepare() hook introduced by commit c84bf6dd2b83
("mm: introduce new .mmap_prepare() file callback").
We have a chicken-and-egg scenario here - until all file systems are
converted to using .mmap_prepare(), we cannot convert these nested
handlers, as we can't call f_op->mmap from an .mmap_prepare() hook.
So we have to do it the other way round - invoke the .mmap_prepare() hook
from an .mmap() one.
in order to do so, we need to convert VMA state into a struct vm_area_desc
descriptor, invoking the underlying file system's f_op->mmap_prepare()
callback passing a pointer to this, and then setting VMA state accordingly
and safely.
This patch achieves this via the compat_vma_mmap_prepare() function, which
we invoke from call_mmap() if f_op->mmap_prepare() is specified in the
passed in file pointer.
We place the fundamental logic into mm/vma.h where VMA manipulation
belongs. We also update the VMA userland tests to accommodate the
changes.
The compat_vma_mmap_prepare() function and its associated machinery is
temporary, and will be removed once the conversion of file systems is
complete.
We carefully place this code so it can be used with CONFIG_MMU and also
with cutting edge nommu silicon.
[akpm@linux-foundation.org: export compat_vma_mmap_prepare tp fix build]
[lorenzo.stoakes@oracle.com: remove unused declarations]
Link: https://lkml.kernel.org/r/ac3ae324-4c65-432a-8c6d-2af988b18ac8@lucifer.local
Link: https://lkml.kernel.org/r/20250609165749.344976-1-lorenzo.stoakes@oracle.com
Fixes: c84bf6dd2b83 ("mm: introduce new .mmap_prepare() file callback").
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Closes: https://lore.kernel.org/linux-mm/CAG48ez04yOEVx1ekzOChARDDBZzAKwet8PEoPM4Ln3_rk91AzQ@mail.gmail.com/
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
While an OOM failure in commit_merge() isn't really feasible due to the
allocation which might fail (a maple tree pre-allocation) being 'too small
to fail', we do need to handle this case correctly regardless.
In vma_merge_existing_range(), we can theoretically encounter failures
which result in an OOM error in two ways - firstly dup_anon_vma() might
fail with an OOM error, and secondly commit_merge() failing, ultimately,
to pre-allocate a maple tree node.
The abort logic for dup_anon_vma() resets the VMA iterator to the initial
range, ensuring that any logic looping on this iterator will correctly
proceed to the next VMA.
However the commit_merge() abort logic does not do the same thing. This
resulted in a syzbot report occurring because mlockall() iterates through
VMAs, is tolerant of errors, but ended up with an incorrect previous VMA
being specified due to incorrect iterator state.
While making this change, it became apparent we are duplicating logic -
the logic introduced in commit 41e6ddcaa0f1 ("mm/vma: add give_up_on_oom
option on modify/merge, use in uffd release") duplicates the
vmg->give_up_on_oom check in both abort branches.
Additionally, we observe that we can perform the anon_dup check safely on
dup_anon_vma() failure, as this will not be modified should this call
fail.
Finally, we need to reset the iterator in both cases, so now we can simply
use the exact same code to abort for both.
We remove the VM_WARN_ON(err != -ENOMEM) as it would be silly for this to
be otherwise and it allows us to implement the abort check more neatly.
Link: https://lkml.kernel.org/r/20250606125032.164249-1-lorenzo.stoakes@oracle.com
Fixes: 47b16d0462a4 ("mm: abort vma_modify() on merge out of memory failure")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: syzbot+d16409ea9ecc16ed261a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/6842cc67.a00a0220.29ac89.003b.GAE@google.com/
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
"The series 'Fix uprobe pte be overwritten when expanding vma' fixes a
longstanding and quite obscure bug related to the vma merging of the
uprobe mmap page"
* tag 'mm-stable-2025-06-06-16-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
selftests/mm: add test about uprobe pte be orphan during vma merge
selftests/mm: extract read_sysfs and write_sysfs into vm_util
mm: expose abnormal new_pte during move_ptes
mm: fix uprobe pte be overwritten when expanding vma
mm/damon: s/primitives/code/ on comments
|
|
Currently, __split_vma() triggers hugetlb page table unsharing through
vm_ops->may_split(). This happens before the VMA lock and rmap locks are
taken - which is too early, it allows racing VMA-locked page faults in our
process and racing rmap walks from other processes to cause page tables to
be shared again before we actually perform the split.
Fix it by explicitly calling into the hugetlb unshare logic from
__split_vma() in the same place where THP splitting also happens. At that
point, both the VMA and the rmap(s) are write-locked.
An annoying detail is that we can now call into the helper
hugetlb_unshare_pmds() from two different locking contexts:
1. from hugetlb_split(), holding:
- mmap lock (exclusively)
- VMA lock
- file rmap lock (exclusively)
2. hugetlb_unshare_all_pmds(), which I think is designed to be able to
call us with only the mmap lock held (in shared mode), but currently
only runs while holding mmap lock (exclusively) and VMA lock
Backporting note:
This commit fixes a racy protection that was introduced in commit
b30c14cd6102 ("hugetlb: unshare some PMDs when splitting VMAs"); that
commit claimed to fix an issue introduced in 5.13, but it should actually
also go all the way back.
[jannh@google.com: v2]
Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-1-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-0-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250527-hugetlb-fixes-splitrace-v1-1-f4136f5ec58a@google.com
Fixes: 39dde65c9940 ("[PATCH] shared page table for hugetlb page")
Signed-off-by: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [b30c14cd6102: hugetlb: unshare some PMDs when splitting VMAs]
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Fix uprobe pte be overwritten when expanding vma".
This patch (of 4):
We encountered a BUG alert triggered by Syzkaller as follows:
BUG: Bad rss-counter state mm:00000000b4a60fca type:MM_ANONPAGES val:1
And we can reproduce it with the following steps:
1. register uprobe on file at zero offset
2. mmap the file at zero offset:
addr1 = mmap(NULL, 2 * 4096, PROT_NONE, MAP_PRIVATE, fd, 0);
3. mremap part of vma1 to new vma2:
addr2 = mremap(addr1, 4096, 2 * 4096, MREMAP_MAYMOVE);
4. mremap back to orig addr1:
mremap(addr2, 4096, 4096, MREMAP_MAYMOVE | MREMAP_FIXED, addr1);
In step 3, the vma1 range [addr1, addr1 + 4096] will be remap to new vma2
with range [addr2, addr2 + 8192], and remap uprobe anon page from the vma1
to vma2, then unmap the vma1 range [addr1, addr1 + 4096].
In step 4, the vma2 range [addr2, addr2 + 4096] will be remap back to the
addr range [addr1, addr1 + 4096]. Since the addr range [addr1 + 4096,
addr1 + 8192] still maps the file, it will take vma_merge_new_range to
expand the range, and then do uprobe_mmap in vma_complete. Since the
merged vma pgoff is also zero offset, it will install uprobe anon page to
the merged vma. However, the upcomming move_page_tables step, which use
set_pte_at to remap the vma2 uprobe pte to the merged vma, will overwrite
the newly uprobe pte in the merged vma, and lead that pte to be orphan.
Since the uprobe pte will be remapped to the merged vma, we can remove the
unnecessary uprobe_mmap upon merged vma.
This problem was first found in linux-6.6.y and also exists in the
community syzkaller:
https://lore.kernel.org/all/000000000000ada39605a5e71711@google.com/T/
Link: https://lkml.kernel.org/r/20250529155650.4017699-1-pulehui@huaweicloud.com
Link: https://lkml.kernel.org/r/20250529155650.4017699-2-pulehui@huaweicloud.com
Fixes: 2b1444983508 ("uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Suggested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of
creating a pte which addresses the first page in a folio and reduces
the amount of plumbing which architecture must implement to provide
this.
- "Misc folio patches for 6.16" from Matthew Wilcox is a shower of
largely unrelated folio infrastructure changes which clean things up
and better prepare us for future work.
- "memory,x86,acpi: hotplug memory alignment advisement" from Gregory
Price adds early-init code to prevent x86 from leaving physical
memory unused when physical address regions are not aligned to memory
block size.
- "mm/compaction: allow more aggressive proactive compaction" from
Michal Clapinski provides some tuning of the (sadly, hard-coded (more
sadly, not auto-tuned)) thresholds for our invokation of proactive
compaction. In a simple test case, the reduction of a guest VM's
memory consumption was dramatic.
- "Minor cleanups and improvements to swap freeing code" from Kemeng
Shi provides some code cleaups and a small efficiency improvement to
this part of our swap handling code.
- "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin
adds the ability for a ptracer to modify syscalls arguments. At this
time we can alter only "system call information that are used by
strace system call tampering, namely, syscall number, syscall
arguments, and syscall return value.
This series should have been incorporated into mm.git's "non-MM"
branch, but I goofed.
- "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from
Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl
against /proc/pid/pagemap. This permits CRIU to more efficiently get
at the info about guard regions.
- "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan
implements that fix. No runtime effect is expected because
validate_page_before_insert() happens to fix up this error.
- "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David
Hildenbrand basically brings uprobe text poking into the current
decade. Remove a bunch of hand-rolled implementation in favor of
using more current facilities.
- "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman
Khandual provides enhancements and generalizations to the pte dumping
code. This might be needed when 128-bit Page Table Descriptors are
enabled for ARM.
- "Always call constructor for kernel page tables" from Kevin Brodsky
ensures that the ctor/dtor is always called for kernel pgtables, as
it already is for user pgtables.
This permits the addition of more functionality such as "insert hooks
to protect page tables". This change does result in various
architectures performing unnecesary work, but this is fixed up where
it is anticipated to occur.
- "Rust support for mm_struct, vm_area_struct, and mmap" from Alice
Ryhl adds plumbing to permit Rust access to core MM structures.
- "fix incorrectly disallowed anonymous VMA merges" from Lorenzo
Stoakes takes advantage of some VMA merging opportunities which we've
been missing for 15 years.
- "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from
SeongJae Park optimizes process_madvise()'s TLB flushing.
Instead of flushing each address range in the provided iovec, we
batch the flushing across all the iovec entries. The syscall's cost
was approximately halved with a microbenchmark which was designed to
load this particular operation.
- "Track node vacancy to reduce worst case allocation counts" from
Sidhartha Kumar makes the maple tree smarter about its node
preallocation.
stress-ng mmap performance increased by single-digit percentages and
the amount of unnecessarily preallocated memory was dramaticelly
reduced.
- "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes
a few unnecessary things which Baoquan noted when reading the code.
- ""Enhance sysfs handling for memory hotplug in weighted interleave"
from Rakie Kim "enhances the weighted interleave policy in the memory
management subsystem by improving sysfs handling, fixing memory
leaks, and introducing dynamic sysfs updates for memory hotplug
support". Fixes things on error paths which we are unlikely to hit.
- "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory"
from SeongJae Park introduces new DAMOS quota goal metrics which
eliminate the manual tuning which is required when utilizing DAMON
for memory tiering.
- "mm/vmalloc.c: code cleanup and improvements" from Baoquan He
provides cleanups and small efficiency improvements which Baoquan
found via code inspection.
- "vmscan: enforce mems_effective during demotion" from Gregory Price
changes reclaim to respect cpuset.mems_effective during demotion when
possible. because presently, reclaim explicitly ignores
cpuset.mems_effective when demoting, which may cause the cpuset
settings to violated.
This is useful for isolating workloads on a multi-tenant system from
certain classes of memory more consistently.
- "Clean up split_huge_pmd_locked() and remove unnecessary folio
pointers" from Gavin Guo provides minor cleanups and efficiency gains
in in the huge page splitting and migrating code.
- "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache
for `struct mem_cgroup', yielding improved memory utilization.
- "add max arg to swappiness in memory.reclaim and lru_gen" from
Zhongkun He adds a new "max" argument to the "swappiness=" argument
for memory.reclaim MGLRU's lru_gen.
This directs proactive reclaim to reclaim from only anon folios
rather than file-backed folios.
- "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the
first step on the path to permitting the kernel to maintain existing
VMs while replacing the host kernel via file-based kexec. At this
time only memblock's reserve_mem is preserved.
- "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides
and uses a smarter way of looping over a pfn range. By skipping
ranges of invalid pfns.
- "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via
cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning
when a task is pinned a single NUMA mode.
Dramatic performance benefits were seen in some real world cases.
- "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank
Garg addresses a warning which occurs during memory compaction when
using JFS.
- "move all VMA allocation, freeing and duplication logic to mm" from
Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more
appropriate mm/vma.c.
- "mm, swap: clean up swap cache mapping helper" from Kairui Song
provides code consolidation and cleanups related to the folio_index()
function.
- "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that.
- "memcg: Fix test_memcg_min/low test failures" from Waiman Long
addresses some bogus failures which are being reported by the
test_memcontrol selftest.
- "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo
Stoakes commences the deprecation of file_operations.mmap() in favor
of the new file_operations.mmap_prepare().
The latter is more restrictive and prevents drivers from messing with
things in ways which, amongst other problems, may defeat VMA merging.
- "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples
the per-cpu memcg charge cache from the objcg's one.
This is a step along the way to making memcg and objcg charging
NMI-safe, which is a BPF requirement.
- "mm/damon: minor fixups and improvements for code, tests, and
documents" from SeongJae Park is yet another batch of miscellaneous
DAMON changes. Fix and improve minor problems in code, tests and
documents.
- "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg
stats to be irq safe. Another step along the way to making memcg
charging and stats updates NMI-safe, a BPF requirement.
- "Let unmap_hugepage_range() and several related functions take folio
instead of page" from Fan Ni provides folio conversions in the
hugetlb code.
* tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits)
mm: pcp: increase pcp->free_count threshold to trigger free_high
mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range()
mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page
mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page
mm/hugetlb: pass folio instead of page to unmap_ref_private()
memcg: objcg stock trylock without irq disabling
memcg: no stock lock for cpu hot-unplug
memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs
memcg: make count_memcg_events re-entrant safe against irqs
memcg: make mod_memcg_state re-entrant safe against irqs
memcg: move preempt disable to callers of memcg_rstat_updated
memcg: memcg_rstat_updated re-entrant safe against irqs
mm: khugepaged: decouple SHMEM and file folios' collapse
selftests/eventfd: correct test name and improve messages
alloc_tag: check mem_profiling_support in alloc_tag_init
Docs/damon: update titles and brief introductions to explain DAMOS
selftests/damon/_damon_sysfs: read tried regions directories in order
mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject()
mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat()
mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs
...
|
|
If, during a mremap() operation for a hugetlb-backed memory mapping,
copy_vma() fails after the source vma has been duplicated and opened (ie.
vma_link() fails), the error is handled by closing the new vma. This
updates the hugetlbfs reservation counter of the reservation map which at
this point is referenced by both the source vma and the new copy. As a
result, once the new vma has been freed and copy_vma() returns, the
reservation counter for the source vma will be incorrect.
This patch addresses this corner case by clearing the hugetlb private page
reservation reference for the new vma and decrementing the reference
before closing the vma, so that vma_close() won't update the reservation
counter. This is also what copy_vma_and_data() does with the source vma
if copy_vma() succeeds, so a helper function has been added to do the
fixup in both functions.
The issue was reported by a private syzbot instance and can be reproduced
using the C reproducer in [1]. It's also a possible duplicate of public
syzbot report [2]. The WARNING report is:
============================================================
page_counter underflow: -1024 nr_pages=1024
WARNING: CPU: 0 PID: 3287 at mm/page_counter.c:61 page_counter_cancel+0xf6/0x120
Modules linked in:
CPU: 0 UID: 0 PID: 3287 Comm: repro__WARNING_ Not tainted 6.15.0-rc7+ #54 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014
RIP: 0010:page_counter_cancel+0xf6/0x120
Code: ff 5b 41 5e 41 5f 5d c3 cc cc cc cc e8 f3 4f 8f ff c6 05 64 01 27 06 01 48 c7 c7 60 15 f8 85 48 89 de 4c 89 fa e8 2a a7 51 ff <0f> 0b e9 66 ff ff ff 44 89 f9 80 e1 07 38 c1 7c 9d 4c 81
RSP: 0018:ffffc900025df6a0 EFLAGS: 00010246
RAX: 2edfc409ebb44e00 RBX: fffffffffffffc00 RCX: ffff8880155f0000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff81c4a23c R09: 1ffff1100330482a
R10: dffffc0000000000 R11: ffffed100330482b R12: 0000000000000000
R13: ffff888058a882c0 R14: ffff888058a882c0 R15: 0000000000000400
FS: 0000000000000000(0000) GS:ffff88808fc53000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004b33e0 CR3: 00000000076d6000 CR4: 00000000000006f0
Call Trace:
<TASK>
page_counter_uncharge+0x33/0x80
hugetlb_cgroup_uncharge_counter+0xcb/0x120
hugetlb_vm_op_close+0x579/0x960
? __pfx_hugetlb_vm_op_close+0x10/0x10
remove_vma+0x88/0x130
exit_mmap+0x71e/0xe00
? __pfx_exit_mmap+0x10/0x10
? __mutex_unlock_slowpath+0x22e/0x7f0
? __pfx_exit_aio+0x10/0x10
? __up_read+0x256/0x690
? uprobe_clear_state+0x274/0x290
? mm_update_next_owner+0xa9/0x810
__mmput+0xc9/0x370
exit_mm+0x203/0x2f0
? __pfx_exit_mm+0x10/0x10
? taskstats_exit+0x32b/0xa60
do_exit+0x921/0x2740
? do_raw_spin_lock+0x155/0x3b0
? __pfx_do_exit+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? _raw_spin_lock_irq+0xc5/0x100
do_group_exit+0x20c/0x2c0
get_signal+0x168c/0x1720
? __pfx_get_signal+0x10/0x10
? schedule+0x165/0x360
arch_do_signal_or_restart+0x8e/0x7d0
? __pfx_arch_do_signal_or_restart+0x10/0x10
? __pfx___se_sys_futex+0x10/0x10
syscall_exit_to_user_mode+0xb8/0x2c0
do_syscall_64+0x75/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x422dcd
Code: Unable to access opcode bytes at 0x422da3.
RSP: 002b:00007ff266cdb208 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: 0000000000000001 RBX: 00007ff266cdbcdc RCX: 0000000000422dcd
RDX: 00000000000f4240 RSI: 0000000000000081 RDI: 00000000004c7bec
RBP: 00007ff266cdb220 R08: 203a6362696c6720 R09: 203a6362696c6720
R10: 0000200000c00000 R11: 0000000000000246 R12: ffffffffffffffd0
R13: 0000000000000002 R14: 00007ffe1cb5f520 R15: 00007ff266cbb000
</TASK>
============================================================
Link: https://lkml.kernel.org/r/20250523-warning_in_page_counter_cancel-v2-1-b6df1a8cfefd@igalia.com
Link: https://people.igalia.com/rcn/kernel_logs/20250422__WARNING_in_page_counter_cancel__repro.c [1]
Link: https://lore.kernel.org/all/67000a50.050a0220.49194.048d.GAE@google.com/ [2]
Signed-off-by: Ricardo Cañuelo Navarro <rcn@igalia.com>
Suggested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Florent Revest <revest@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We have now introduced a mechanism that obviates the need for a
reattempted merge via the mmap_prepare() file hook, so eliminate this
functionality altogether.
The retry merge logic has been the cause of a great deal of complexity in
the past and required a great deal of careful manoeuvring of code to
ensure its continued and correct functionality.
It has also recently been involved in an issue surrounding maple tree
state, which again points to its problematic nature.
We make it much easier to reason about mmap() logic by eliminating this
and simply writing a VMA once. This also opens the doors to future
optimisation and improvement in the mmap() logic.
For any device or file system which encounters unwanted VMA fragmentation
as a result of this change (that is, having not implemented .mmap_prepare
hooks), the issue is easily resolvable by doing so.
Link: https://lkml.kernel.org/r/d5d8fc74f02b89d6bec5ae8bc0e36d7853b65cda.1746792520.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "eliminate mmap() retry merge, add .mmap_prepare hook", v2.
During the mmap() of a file-backed mapping, we invoke the underlying
driver file's mmap() callback in order to perform driver/file system
initialisation of the underlying VMA.
This has been a source of issues in the past, including a significant
security concern relating to unwinding of error state discovered by Jann
Horn, as fixed in commit 5de195060b2e ("mm: resolve faulty mmap_region()
error path behaviour") which performed the recent, significant, rework of
mmap() as a whole.
However, we have had a fly in the ointment remain - drivers have a great
deal of freedom in the .mmap() hook to manipulate VMA state (as well as
page table state).
This can be problematic, as we can no longer reason sensibly about VMA
state once the call is complete (the ability to do - anything - here does
rather interfere with that).
In addition, callers may choose to do odd or unusual things which might
interfere with subsequent steps in the mmap() process, and it may do so
and then raise an error, requiring very careful unwinding of state about
which we can make no assumptions.
Rather than providing such an open-ended interface, this series provides
an alternative, far more restrictive one - we expose a whitelist of fields
which can be adjusted by the driver, along with immutable state upon which
the driver can make such decisions:
struct vm_area_desc {
/* Immutable state. */
struct mm_struct *mm;
unsigned long start;
unsigned long end;
/* Mutable fields. Populated with initial state. */
pgoff_t pgoff;
struct file *file;
vm_flags_t vm_flags;
pgprot_t page_prot;
/* Write-only fields. */
const struct vm_operations_struct *vm_ops;
void *private_data;
};
The mmap logic then updates the state used to either merge with a VMA or
establish a new VMA based upon this logic.
This is achieved via new file hook .mmap_prepare(), which is, importantly,
invoked very early on in the mmap() process.
If an error arises, we can very simply abort the operation with very
little unwinding of state required.
The existing logic contains another, related, peccadillo - since the
.mmap() callback might do anything, it may also cause a previously
unmergeable VMA to become mergeable with adjacent VMAs.
Right now the logic will retry a merge like this only if the driver
changes VMA flags, and changes them in such a way that a merge might
succeed (that is, the flags are not 'special', that is do not contain any
of the flags specified in VM_SPECIAL).
This has also been the source of a great deal of pain - it's hard to
reason about an .mmap() callback that might do - anything - but it's also
hard to reason about setting up a VMA and writing to the maple tree, only
to do it again utilising a great deal of shared state.
Since .mmap_prepare() sets fields before the first merge is even
attempted, the use of this callback obviates the need for this retry merge
logic.
A driver may only specify .mmap_prepare() or the deprecated .mmap()
callback. In future we may add futher callbacks beyond .mmap_prepare() to
faciliate all use cass as we convert drivers.
In researching this change, I examined every .mmap() callback, and
discovered only a very few that set VMA state in such a way that a. the
VMA flags changed and b. this would be mergeable.
In the majority of cases, it turns out that drivers are mapping kernel
memory and thus ultimately set VM_PFNMAP, VM_MIXEDMAP, or other
unmergeable VM_SPECIAL flags.
Of those that remain I identified a number of cases which are only
applicable in DAX, setting the VM_HUGEPAGE flag:
* dax_mmap()
* erofs_file_mmap()
* ext4_file_mmap()
* xfs_file_mmap()
For this remerge to not occur and to impact users, each of these cases
would require a user to mmap() files using DAX, in parts, immediately
adjacent to one another.
This is a very unlikely usecase and so it does not appear to be worthwhile
to adjust this functionality accordingly.
We can, however, very quickly do so if needed by simply adding an
.mmap_prepare() callback to these as required.
There are two further non-DAX cases I idenitfied:
* orangefs_file_mmap() - Clears VM_RAND_READ if set, replacing with
VM_SEQ_READ.
* usb_stream_hwdep_mmap() - Sets VM_DONTDUMP.
Both of these cases again seem very unlikely to be mmap()'d immediately
adjacent to one another in a fashion that would result in a merge.
Finally, we are left with a viable case:
* secretmem_mmap() - Set VM_LOCKED, VM_DONTDUMP.
This is viable enough that the mm selftests trigger the logic as a matter
of course. Therefore, this series replace the .secretmem_mmap() hook with
.secret_mmap_prepare().
This patch (of 3):
Provide a means by which drivers can specify which fields of those
permitted to be changed should be altered to prior to mmap()'ing a range
(which may either result from a merge or from mapping an entirely new
VMA).
Doing so is substantially safer than the existing .mmap() calback which
provides unrestricted access to the part-constructed VMA and permits
drivers and file systems to do 'creative' things which makes it hard to
reason about the state of the VMA after the function returns.
The existing .mmap() callback's freedom has caused a great deal of issues,
especially in error handling, as unwinding the mmap() state has proven to
be non-trivial and caused significant issues in the past, for instance
those addressed in commit 5de195060b2e ("mm: resolve faulty mmap_region()
error path behaviour").
It also necessitates a second attempt at merge once the .mmap() callback
has completed, which has caused issues in the past, is awkward, adds
overhead and is difficult to reason about.
The .mmap_prepare() callback eliminates this requirement, as we can update
fields prior to even attempting the first merge. It is safer, as we
heavily restrict what can actually be modified, and being invoked very
early in the mmap() process, error handling can be performed safely with
very little unwinding of state required.
The .mmap_prepare() and deprecated .mmap() callbacks are mutually
exclusive, so we permit only one to be invoked at a time.
Update vma userland test stubs to account for changes.
Link: https://lkml.kernel.org/r/cover.1746792520.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/adb36a7c4affd7393b2fc4b54cc5cfe211e41f71.1746792520.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are peculiarities within the kernel where what is very clearly mm
code is performed elsewhere arbitrarily.
This violates separation of concerns and makes it harder to refactor code
to make changes to how fundamental initialisation and operation of mm
logic is performed.
One such case is the creation of the VMA containing the initial stack upon
execve()'ing a new process. This is currently performed in
__bprm_mm_init() in fs/exec.c.
Abstract this operation to create_init_stack_vma(). This allows us to
limit use of vma allocation and free code to fork and mm only.
We previously did the same for the step at which we relocate the initial
stack VMA downwards via relocate_vma_down(), now we move the initial VMA
establishment too.
Take the opportunity to also move insert_vm_struct() to mm/vma.c as it's
no longer needed anywhere outside of mm.
Link: https://lkml.kernel.org/r/118c950ef7a8dd19ab20a23a68c3603751acd30e.1745853549.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "fix incorrectly disallowed anonymous VMA merges", v2.
It appears that we have been incorrectly rejecting merge cases for 15
years, apparently by mistake.
Imagine a range of anonymous mapped momemory divided into two VMAs like
this, with incompatible protection bits:
RW RWX
unfaulted faulted
|-----------|-----------|
| prev | vma |
|-----------|-----------|
mprotect(RW)
Now imagine mprotect()'ing vma so it is RW. This appears as if it should
merge, it does not.
Neither does this case, again mprotect()'ing vma RW:
RWX RW
faulted unfaulted
|-----------|-----------|
| vma | next |
|-----------|-----------|
mprotect(RW)
Nor:
RW RWX RW
unfaulted faulted unfaulted
|-----------|-----------|-----------|
| prev | vma | next |
|-----------|-----------|-----------|
mprotect(RW)
What's going on here?
In commit 5beb49305251 ("mm: change anon_vma linking to fix multi-process
server scalability issue"), from 2010, Rik von Riel took careful care to
account for these cases - commenting that '[this is] easily overlooked:
when mprotect shifts the boundary, make sure the expanding vma has
anon_vma set if the shrinking vma had, to cover any anon pages imported.'
However, commit 965f55dea0e3 ("mmap: avoid merging cloned VMAs")
introduced a little over a year later, appears to have accidentally
disallowed this.
By adjusting the is_mergeable_anon_vma() function to avoid lock contention
across large trees of forked anon_vma's, this commit wrongly assumed the
VMA being checked (the ostensible merge 'target') should be faulted, that
is, have an anon_vma, and thus an anon_vma_chain list established, but
only of length 1.
This appears to have been unintentional, as disallowing empty target VMAs
like this across the board makes no sense.
We already have logic that accounts for this case, the same logic Rik
introduced in 2010, now via dup_anon_vma() (and ultimately
anon_vma_clone()), so there is no problem permitting this.
This series fixes this mistake and also ensures that scalability concerns
remain addressed by explicitly checking that whatever VMA is being merged
has not been forked.
A full set of self tests which reproduce the issue are provided, as well
as updating userland VMA tests to assert this behaviour.
The self tests additionally assert scalability concerns are addressed.
This patch (of 3):
anon_vma_chain's were introduced by Rik von Riel in commit 5beb49305251
("mm: change anon_vma linking to fix multi-process server scalability
issue").
This patch was introduced in March 2010. As part of this change, careful
attention was made to the instance of mprotect() causing a VMA merge, with
one faulted (i.e. having anon_vma set) and another not:
/*
* Easily overlooked: when mprotect shifts the boundary,
* make sure the expanding vma has anon_vma set if the
* shrinking vma had, to cover any anon pages imported.
*/
In the modern VMA code, this is handled in dup_anon_vma() (and ultimately
anon_vma_clone()).
This case is one of the three configurations of adjacent VMA anon_vma
state that we might encounter on merge (where dst is the VMA which will be
merged into and src the one being merged into dst):
1. dst->anon_vma, src->anon_vma - These must be equal, no-op.
2. dst->anon_vma, !src->anon_vma - We simply use dst->anon_vma, no-op.
3. !dst->anon_vma, src->anon_vma - The case in question here.
In case 3, the instance addressed here - we duplicate the AVC connections
from src and place into dst.
However, in practice, we very often do NOT do this.
This appears to be due to an inadvertent consequence of the change
introduced by commit 965f55dea0e3 ("mmap: avoid merging cloned VMAs"),
introduced in May 2011.
This implies that this merge case was functional only for a little over a
year, and has since been broken for ~15 years.
Here, lock scalability concerns lead to us restricting anonymous merges
only to those VMAs with 1 entry in their vma->anon_vma_chain, that is, a
VMA that is not connected to any parent process's anon_vma.
The mergeability test looks like this:
static inline bool is_mergeable_anon_vma(struct anon_vma *anon_vma1,
struct anon_vma *anon_vma2, struct vm_area_struct *vma)
{
if ((!anon_vma1 || !anon_vma2) && (!vma ||
!vma->anon_vma || list_is_singular(&vma->anon_vma_chain)))
return true;
return anon_vma1 == anon_vma2;
}
However, we have a problem here - typically the vma passed here is the
destination VMA.
For instance in vma_merge_existing_range() we invoke:
can_vma_merge_left()
-> [ check that there is an immediately adjacent prior VMA ]
-> can_vma_merge_after()
-> is_mergeable_vma() for general attribute check
-> is_mergeable_anon_vma([ proposed anon_vma ], prev->anon_vma, prev)
So if we were considering a target unfaulted 'prev':
unfaulted faulted
|-----------|-----------|
| prev | vma |
|-----------|-----------|
This would call is_mergeable_anon_vma(NULL, vma->anon_vma, prev).
The list_is_singular() check for vma->anon_vma_chain, an empty list on
fault, would cause this merge to _fail_ even though all else indicates a
merge.
Equally a simple merge into a next VMA would hit the same problem:
faulted unfaulted
|-----------|-----------|
| vma | next |
|-----------|-----------|
can_vma_merge_right()
-> [ check that there is an immediately adjacent succeeding VMA ]
-> can_vma_merge_before()
-> is_mergeable_vma() for general attribute check
-> is_mergeable_anon_vma([ proposed anon_vma ], next->anon_vma, next)
For a 3-way merge, we'd also hit the same problem if it was configured like
this for instance:
unfaulted faulted unfaulted
|-----------|-----------|-----------|
| prev | vma | next |
|-----------|-----------|-----------|
As we'd call can_vma_merge_left() for prev, and can_vma_merge_right() for
next, both of which would fail.
vma_merge_new_range() (and relatedly, vma_expand()) are not impacted, as
the new VMA would never already be faulted (it is a proposed new range).
Because we already handle each of the aforementioned merge cases, and can
absolutely therefore deal with an existing VMA merge with !dst->anon_vma,
src->anon_vma, there is absolutely no reason to disallow this kind of
merge.
It seems that the intention of this patch is to ensure that, in the
instance of merging unfaulted VMAs with faulted ones, we never wish to do
so with those with multiple AVCs due to the fact that anon_vma lock's are
held across both parent and child anon_vma's (actually, the 'root' parent
anon_vma's lock is used).
In fact, the original commit alludes to this - "find_mergeable_anon_vma()
already considers this case".
In find_mergeable_anon_vma() however, we check the anon_vma which will be
merged from, if it is set, then we check
list_is_singular(vma->anon_vma_chain).
So to match this logic, update is_mergeable_anon_vma() to perform this
scalability check on the VMA whose anon_vma we ultimately merge into.
This matches existing behaviour with forked VMAs, only we no longer
wrongly disallow ALL empty target merges.
So we both allow merge cases and ensure the scalability check is correctly
applied.
We may wish to revisit these lock scalability concerns at a later date and
ensure they are still valid.
Additionally, correct userland VMA tests which were mistakenly not
asserting these cases correctly previously to now correctly assert this,
and to ensure vmg->anon_vma state is always consistent to account for
newly introduced asserts.
Link: https://lkml.kernel.org/r/cover.1744104124.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/18c756fc9eaf7ad082a710c91133b8346f8cd9a8.1744104124.git.lorenzo.stoakes@oracle.com
Fixes: 965f55dea0e3 ("mmap: avoid merging cloned VMAs")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, if a VMA merge fails due to an OOM condition arising on commit
merge or a failure to duplicate anon_vma's, we report this so the caller
can handle it.
However there are cases where the caller is only ostensibly trying a
merge, and doesn't mind if it fails due to this condition.
Since we do not want to introduce an implicit assumption that we only
actually modify VMAs after OOM conditions might arise, add a 'give up on
oom' option and make an explicit contract that, should this flag be set, we
absolutely will not modify any VMAs should OOM arise and just bail out.
Since it'd be very unusual for a user to try to vma_modify() with this flag
set but be specifying a range within a VMA which ends up being split (which
can fail due to rlimit issues, not only OOM), we add a debug warning for
this condition.
The motivating reason for this is uffd release - syzkaller (and Pedro
Falcato's VERY astute analysis) found a way in which an injected fault on
allocation, triggering an OOM condition on commit merge, would result in
uffd code becoming confused and treating an error value as if it were a VMA
pointer.
To avoid this, we make use of this new VMG flag to ensure that this never
occurs, utilising the fact that, should we be clearing entire VMAs, we do
not wish an OOM event to be reported to us.
Many thanks to Pedro Falcato for his excellent analysis and Jann Horn for
his insightful and intelligent analysis of the situation, both of whom were
instrumental in this fix.
Link: https://lkml.kernel.org/r/20250321100937.46634-1-lorenzo.stoakes@oracle.com
Reported-by: syzbot+20ed41006cf9d842c2b5@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67dc67f0.050a0220.25ae54.001e.GAE@google.com/
Fixes: 47b16d0462a4 ("mm: abort vma_modify() on merge out of memory failure")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Suggested-by: Pedro Falcato <pfalcato@suse.de>
Suggested-by: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
To enable SLAB_TYPESAFE_BY_RCU for vma cache we need to ensure that
object reuse before RCU grace period is over will be detected by
lock_vma_under_rcu().
Current checks are sufficient as long as vma is detached before it is
freed. The only place this is not currently happening is in exit_mmap().
Add the missing vma_mark_detached() in exit_mmap().
Another issue which might trick lock_vma_under_rcu() during vma reuse is
vm_area_dup(), which copies the entire content of the vma into a new one,
overriding new vma's vm_refcnt and temporarily making it appear as
attached. This might trick a racing lock_vma_under_rcu() to operate on a
reused vma if it found the vma before it got reused. To prevent this
situation, we should ensure that vm_refcnt stays at detached state (0)
when it is copied and advances to attached state only after it is added
into the vma tree. Introduce vm_area_init_from() which preserves new
vma's vm_refcnt and use it in vm_area_dup(). Since all vmas are in
detached state with no current readers when they are freed,
lock_vma_under_rcu() will not be able to take vm_refcnt after vma got
detached even if vma is reused. vma_mark_attached() in modified to
include a release fence to ensure all stores to the vma happen before
vm_refcnt gets initialized.
Finally, make vm_area_cachep SLAB_TYPESAFE_BY_RCU. This will facilitate
vm_area_struct reuse and will minimize the number of call_rcu() calls.
[surenb@google.com: remove atomic_set_release() usage in tools/]
Link: https://lkml.kernel.org/r/20250217054351.2973666-1-surenb@google.com
Link: https://lkml.kernel.org/r/20250213224655.1680278-18-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Shivank Garg <shivankg@amd.com>
Link: https://lkml.kernel.org/r/5e19ec93-8307-47c2-bb13-3ddf7150624e@amd.com
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When exit_mmap() removes vmas belonging to an exiting task, it does not
mark them as detached since they can't be reached by other tasks and they
will be freed shortly. Once we introduce vma reuse, all vmas will have to
be in detached state before they are freed to ensure vma when reused is in
a consistent state. Add missing vma_mark_detached() before freeing the
vma.
Link: https://lkml.kernel.org/r/20250213224655.1680278-6-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Shivank Garg <shivankg@amd.com>
Link: https://lkml.kernel.org/r/5e19ec93-8307-47c2-bb13-3ddf7150624e@amd.com
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
vma_iter_store() functions can be used both when adding a new vma and when
updating an existing one. However for existing ones we do not need to
mark them attached as they are already marked that way. With
vma->detached being a separate flag, double-marking a vmas as attached or
detached is not an issue because the flag will simply be overwritten with
the same value. However once we fold this flag into the refcount later in
this series, re-attaching or re-detaching a vma becomes an issue since
these operations will be incrementing/decrementing a refcount.
Introduce vma_iter_store_new() and vma_iter_store_overwrite() to replace
vma_iter_store() and avoid re-attaching a vma during vma update. Add
assertions in vma_mark_attached()/vma_mark_detached() to catch invalid
usage. Update vma tests to check for vma detached state correctness.
Link: https://lkml.kernel.org/r/20250213224655.1680278-5-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Tested-by: Shivank Garg <shivankg@amd.com>
Link: https://lkml.kernel.org/r/5e19ec93-8307-47c2-bb13-3ddf7150624e@amd.com
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Current implementation does not set detached flag when a VMA is first
allocated. This does not represent the real state of the VMA, which is
detached until it is added into mm's VMA tree. Fix this by marking new
VMAs as detached and resetting detached flag only after VMA is added into
a tree.
Introduce vma_mark_attached() to make the API more readable and to
simplify possible future cleanup when vma->vm_mm might be used to indicate
detached vma and vma_mark_attached() will need an additional mm parameter.
Link: https://lkml.kernel.org/r/20250213224655.1680278-4-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Shivank Garg <shivankg@amd.com>
Link: https://lkml.kernel.org/r/5e19ec93-8307-47c2-bb13-3ddf7150624e@amd.com
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The adj_start calculation has been a constant source of confusion in the
VMA merge code.
There are two cases to consider, one where we adjust the start of the
vmg->middle VMA (i.e. the vmg->__adjust_middle_start merge flag is set),
in which case adj_start is calculated as:
(1) adj_start = vmg->end - vmg->middle->vm_start
And the case where we adjust the start of the vmg->next VMA (i.e. the
vmg->__adjust_next_start merge flag is set), in which case adj_start is
calculated as:
(2) adj_start = -(vmg->middle->vm_end - vmg->end)
We apply (1) thusly:
vmg->middle->vm_start =
vmg->middle->vm_start + vmg->end - vmg->middle->vm_start
Which simplifies to:
vmg->middle->vm_start = vmg->end
Similarly, we apply (2) as:
vmg->next->vm_start =
vmg->next->vm_start + -(vmg->middle->vm_end - vmg->end)
Noting that for these VMAs to be mergeable vmg->middle->vm_end ==
vmg->next->vm_start and so this simplifies to:
vmg->next->vm_start =
vmg->next->vm_start + -(vmg->next->vm_start - vmg->end)
Which simplifies to:
vmg->next->vm_start = vmg->end
Therefore in each case, we simply need to adjust the start of the VMA to
vmg->end (!) and can do away with this adj_start calculation. The only
caveat is that we must ensure we update the vm_pgoff field correctly.
We therefore abstract this entire calculation to a new function
vmg_adjust_set_range() which performs this calculation and sets the
adjusted VMA's new range using the general vma_set_range() function.
We also must update vma_adjust_trans_huge() which expects the
now-abstracted adj_start parameter. It turns out this is wholly
unnecessary.
In vma_adjust_trans_huge() the relevant code is:
if (adjust_next > 0) {
struct vm_area_struct *next = find_vma(vma->vm_mm, vma->vm_end);
unsigned long nstart = next->vm_start;
nstart += adjust_next;
split_huge_pmd_if_needed(next, nstart);
}
The only case where this is relevant is when vmg->__adjust_middle_start is
specified (in which case adj_next would have been positive), i.e. the one
in which the vma specified is vmg->prev and this the sought 'next' VMA
would be vmg->middle.
We can therefore eliminate the find_vma() invocation altogether and simply
provide the vmg->middle VMA in this instance, or NULL otherwise.
Again we have an adj_next offset calculation:
next->vm_start + vmg->end - vmg->middle->vm_start
Where next == vmg->middle this simplifies to vmg->end as previously
demonstrated.
Therefore nstart is equal to vmg->end, which is already passed to
vma_adjust_trans_huge() via the 'end' parameter and so this code (rather
delightfully) simplifies to:
if (next)
split_huge_pmd_if_needed(next, end);
With these changes in place, it becomes silly for commit_merge() to return
vmg->target, as it is always the same and threaded through vmg, so we
finally change commit_merge() to return an error value once again.
This patch has no change in functional behaviour.
Link: https://lkml.kernel.org/r/7bce2cd4b5afb56211822835d145471280c3dccc.1738326519.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It is confusing for vmg->target to sometimes be the target merged VMA and
in one case not.
Fix this by having commit_merge() use its awareness of the
vmg->_adjust_next_start case to know that it is manipulating a separate
vma, abstracted in the 'vma' local variable.
Place removal and adjust VMA determination logic into
init_multi_vma_prep(), as the flags give us enough information to do so,
and since this is the function that sets up the vma_prepare struct it
makes sense to do so here.
Doing this significantly simplifies commit_merge(), allowing us to
eliminate the 'merge_target' handling, initialise the VMA iterator in a
more sensible place and simply return vmg->target consistently.
This also allows us to simplify setting vmg->target in
vma_merge_existing_range() since we are then left only with two cases -
merge left (or both) where the target is vmg->prev or merge right in which
the target is vmg->next.
This makes it easy for somebody reading the code to know what VMA will
actually be the one returned and merged into and removes a great deal of
the confusing 'adjust' nonsense.
This patch has no change in functional behaviour.
Link: https://lkml.kernel.org/r/50f96e31ab1980eaaf1006e34a4f6e6dad9320b8.1738326519.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce internal vmg->__adjust_middle_start and vmg->__adjust_next_start
merge flags, enabling us to indicate to commit_merge() that we are
performing a merge which either spans only part of vmg->middle, or part of
vmg->next respectively.
In the former instance, we change the start of vmg->middle to match the
attributes of vmg->prev, without spanning all of vmg->middle.
This implies that vmg->prev->vm_end and vmg->middle->vm_start are both
increased to form the new merged VMA (vmg->prev) and the new subsequent
VMA (vmg->middle).
In the latter case, we change the end of vmg->middle to match the
attributes of vmg->next, without spanning all of vmg->next.
This implies that vmg->middle->vm_end and vmg->next->vm_start are both
decreased to form the new merged VMA (vmg->next) and the new prior VMA
(vmg->middle).
Since we now have a stable set of prev, middle, next VMAs threaded through
vmg and with these flags set know what is happening, we can perform the
calculation in commit_merge() instead.
This allows us to drop the confusing adj_start parameter and instead pass
semantic information to commit_merge().
In the latter case the -(middle->vm_end - start) calculation becomes
-(middle->vm-end - vmg->end), however this is correct as vmg->end is set
to the start parameter.
This is because in this case (rather confusingly), we manipulate
vmg->middle, but ultimately return vmg->next, whose range will be
correctly specified. At this point vmg->start, end is the new range for
the prior VMA rather than the merged one.
This patch has no change in functional behaviour.
Link: https://lkml.kernel.org/r/bcec0cd980b373a5eb02236cb033034ce1effe42.1738326519.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current VMA merge mechanism contains a number of confusing mechanisms
around removal of VMAs on merge and the shrinking of the VMA adjacent to
vma->target in the case of merges which result in a partial merge with
that adjacent VMA.
Since we now have a STABLE set of VMAs - prev, middle, next - we are now
able to have the caller of commit_merge() explicitly tell us which VMAs
need deleting, using newly introduced internal VMA merge flags.
Doing so allows us to embed this state within the VMG and remove the
confusing remove, remove2 parameters from commit_merge().
We additionally are able to eliminate the highly confusing and misleading
'expanded' parameter - a parameter that in reality refers to whether or
not the return VMA is the target one or the one immediately adjacent.
We can infer which is the case from whether or not the adj_start parameter
is negative. This also allows us to simplify further logic around
iterator configuration and VMA iterator stores.
Doing so means we can also eliminate the adjust parameter, as we are able
to infer which VMA ought to be adjusted from adj_start - a positive value
implies we adjust the start of 'middle', a negative one implies we adjust
the start of 'next'.
We are then able to have commit_merge() explicitly return the target VMA,
or NULL on inability to pre-allocate memory. Errors were previously
filtered so behaviour does not change.
We additionally move from the slightly odd use of a bitwise-flag enum
vmg->merge_flags field to vmg bitfields.
This patch has no change in functional behaviour.
Link: https://lkml.kernel.org/r/7bf2ed24af68aac18672b7acebbd9102f48c5b03.1738326519.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: further simplify VMA merge operation", v3.
While significant efforts have been made to improve the VMA merge
operation, there remains remnants of the bad (or rather confusing) old
days, which make the code difficult to understand, more bug prone and thus
harder to modify.
This series attempts to significantly improve matters in a number of
respects - with a focus on simplifying the commit_merge() function which
actually actions the merge operation - and importantly, adjusting the two
most confusing merge cases - those in which we 'adjust' the VMA
immediately adjacent to the one being merged.
One source of confusion are the VMAs being threaded through the operation
themselves - vmg->prev, vmg->vma and vmg->next.
At the start of the operation, vmg->vma is either NULL if a new VMA is
propose to be added, or if not then a pointer to an existing VMA being
modified, and prev/next are (perhaps not present) VMAs sat immediately
before and after the range specified in vmg->start, end, respectively.
However, during the VMA merge operation, we change vmg->start, end and
pgoff to span the newly merged range and vmg->vma to either be:
a. The ultimately returned VMA (in most cases) or b. A VMA which we will
manipulate, but ultimately instead return vmg->next.
Case b. especially here is confusing for somebody reading this code, but
the fact we update this state, along with vmg->start, end, pgoff only
makes matters worse.
We simplify things by replacing vmg->vma with vmg->middle and never
changing it - this is always either NULL (for a new VMA) or the VMA being
modified between vmg->prev and vmg->next.
We further simplify by placing the merged VMA in a new vmg->target field -
whether case b. above is the case or not. The reader of the code can now
simply rely on vmg->middle being the middle VMA and vmg->target being the
ultimately merged VMA.
We additionally tackle the confusing cases where we 'adjust' VMAs other
than the one we ultimately return as the merged VMA (this includes case b.
above). These are:
(1)
merge
<----------->
|------||--------| |------------|---|
| prev || middle | -> | target | m |
|------||--------| |------------|---|
In which case middle must be adjusted so middle->vm_start is increased as
well as performing the merge.
(2) (equivalent to case b. above)
<------------->
|---------||------| |---|-------------|
| middle || next | -> | m | target |
|---------||------| |---|-------------|
In which case next must be adjusted so next->vm_start is decreased as well
as performing the merge.
This cases have previously been performed by calculating and passing
around a dubious and confusing 'adj_start' parameter along side a pointer
to an 'adjust' VMA indicating which VMA requires additional adjustment
(middle in case 1 and next in case 2).
With the VMG structure in place we are able to avoid this by simply
setting a merge flag to describe each case:
(1) Sets the vmg->__adjust_middle_start flag
(2) Sets the vmg->__adjust_next_start flag
By doing so it turns out we can vastly simplify the logic and calculate
what is required to perform the operation.
Taken together the refactorings make it far easier to understand what is
being done even in these more confusing cases, make the code far more
maintainable, debuggable, and testable, providing more internal state
indicating what is happening in the merge operation.
The changes have no functional net impact on the merge operation and
everything should still behave as it did before.
This patch (of 5):
The merge code, while much improved, still has a number of points of
confusion. As part of a broader series cleaning this up to make this more
maintainable, we start by addressing some confusion around
vma_merge_struct fields.
So far, the caller either provides no vmg->vma (a new VMA) or supplies the
existing VMA which is being altered, setting vmg->start,end,pgoff to the
proposed VMA dimensions.
vmg->vma is then updated, as are vmg->start,end,pgoff as the merge process
proceeds and the appropriate merge strategy is determined.
This is rather confusing, as vmg->vma starts off as the 'middle' VMA
between vmg->prev,next, but becomes the 'target' VMA, except in one
specific edge case (merge next, shrink middle).
Int his patch we introduce vmg->middle to describe the VMA that is between
vmg->prev and vmg->next, and does NOT change during the merge operation.
We replace vmg->vma with vmg->target, and use this only during the merge
operation itself.
Aside from the merge right, shrink middle case, this becomes the VMA that
forms the basis of the VMA that is returned. This edge case can be
addressed in a future commit.
We also add a number of comments to explain what is going on.
Finally, we adjust the ASCII diagrams showing each merge case in
vma_merge_existing_range() to be clearer - the arrow range previously
showed the vmg->start, end spanned area, but it is clearer to change this
to show the final merged VMA.
This patch has no change in functional behaviour.
Link: https://lkml.kernel.org/r/cover.1738326519.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/4dfe60f1419d55e5d0516f56349695d73a57184c.1738326519.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We already are registering private-anon VMAs with khugepaged during fault
time, in do_huge_pmd_anonymous_page(). Commit "register suitable readonly
file vmas for khugepaged" moved the khugepaged registration logic from
shmem_mmap to the generic mmap path.
The userspace-visible effect should be this: khugepaged will unnecessarily
scan mm's which haven't yet faulted in. Note that it won't actually
collapse because all PTEs are none.
Now that I think about it, the mm is going to have a file VMA anyways
during fork+exec, so the mm already gets registered during mmap due to the
non-anon case (I *think*), so at least one of either the mmap registration
or fault-time registration is redundant.
Make this logic specific for non-anon mappings.
Link: https://lkml.kernel.org/r/20250306063037.16299-1-dev.jain@arm.com
Fixes: 613bec092fe7 ("mm: mmap: register suitable readonly file vmas for khugepaged")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The remainder of vma_modify() relies upon the vmg state remaining pristine
after a merge attempt.
Usually this is the case, however in the one edge case scenario of a merge
attempt failing not due to the specified range being unmergeable, but
rather due to an out of memory error arising when attempting to commit the
merge, this assumption becomes untrue.
This results in vmg->start, end being modified, and thus the proceeding
attempts to split the VMA will be done with invalid start/end values.
Thankfully, it is likely practically impossible for us to hit this in
reality, as it would require a maple tree node pre-allocation failure that
would likely never happen due to it being 'too small to fail', i.e. the
kernel would simply keep retrying reclaim until it succeeded.
However, this scenario remains theoretically possible, and what we are
doing here is wrong so we must correct it.
The safest option is, when this scenario occurs, to simply give up the
operation. If we cannot allocate memory to merge, then we cannot allocate
memory to split either (perhaps moreso!).
Any scenario where this would be happening would be under very extreme
(likely fatal) memory pressure, so it's best we give up early.
So there is no doubt it is appropriate to simply bail out in this
scenario.
However, in general we must if at all possible never assume VMG state is
stable after a merge attempt, since merge operations update VMG fields.
As a result, additionally also make this clear by storing start, end in
local variables.
The issue was reported originally by syzkaller, and by Brad Spengler (via
an off-list discussion), and in both instances it manifested as a
triggering of the assert:
VM_WARN_ON_VMG(start >= end, vmg);
In vma_merge_existing_range().
It seems at least one scenario in which this is occurring is one in which
the merge being attempted is due to an madvise() across multiple VMAs
which looks like this:
start end
|<------>|
|----------|------|
| vma | next |
|----------|------|
When madvise_walk_vmas() is invoked, we first find vma in the above
(determining prev to be equal to vma as we are offset into vma), and then
enter the loop.
We determine the end of vma that forms part of the range we are
madvise()'ing by setting 'tmp' to this value:
/* Here vma->vm_start <= start < (end|vma->vm_end) */
tmp = vma->vm_end;
We then invoke the madvise() operation via visit(), letting prev get
updated to point to vma as part of the operation:
/* Here vma->vm_start <= start < tmp <= (end|vma->vm_end). */
error = visit(vma, &prev, start, tmp, arg);
Where the visit() function pointer in this instance is
madvise_vma_behavior().
As observed in syzkaller reports, it is ultimately madvise_update_vma()
that is invoked, calling vma_modify_flags_name() and vma_modify() in turn.
Then, in vma_modify(), we attempt the merge:
merged = vma_merge_existing_range(vmg);
if (merged)
return merged;
We invoke this with vmg->start, end set to start, tmp as such:
start tmp
|<--->|
|----------|------|
| vma | next |
|----------|------|
We find ourselves in the merge right scenario, but the one in which we
cannot remove the middle (we are offset into vma).
Here we have a special case where vmg->start, end get set to perhaps
unintuitive values - we intended to shrink the middle VMA and expand the
next.
This means vmg->start, end are set to... vma->vm_start, start.
Now the commit_merge() fails, and vmg->start, end are left like this.
This means we return to the rest of vma_modify() with vmg->start, end
(here denoted as start', end') set as:
start' end'
|<-->|
|----------|------|
| vma | next |
|----------|------|
So we now erroneously try to split accordingly. This is where the
unfortunate stuff begins.
We start with:
/* Split any preceding portion of the VMA. */
if (vma->vm_start < vmg->start) {
...
}
This doesn't trigger as we are no longer offset into vma at the start.
But then we invoke:
/* Split any trailing portion of the VMA. */
if (vma->vm_end > vmg->end) {
...
}
Which does get invoked. This leaves us with:
start' end'
|<-->|
|----|-----|------|
| vma| new | next |
|----|-----|------|
We then return ultimately to madvise_walk_vmas(). Here 'new' is unknown,
and putting back the values known in this function we are faced with:
start tmp end
| | |
|----|-----|------|
| vma| new | next |
|----|-----|------|
prev
Then:
start = tmp;
So:
start end
| |
|----|-----|------|
| vma| new | next |
|----|-----|------|
prev
The following code does not cause anything to happen:
if (prev && start < prev->vm_end)
start = prev->vm_end;
if (start >= end)
break;
And then we invoke:
if (prev)
vma = find_vma(mm, prev->vm_end);
Which is where a problem occurs - we don't know about 'new' so we
essentially look for the vma after prev, which is new, whereas we actually
intended to discover next!
So we end up with:
start end
| |
|----|-----|------|
|prev| vma | next |
|----|-----|------|
And we have successfully bypassed all of the checks madvise_walk_vmas()
has to ensure early exit should we end up moving out of range.
We loop around, and hit:
/* Here vma->vm_start <= start < (end|vma->vm_end) */
tmp = vma->vm_end;
Oh dear. Now we have:
tmp
start end
| |
|----|-----|------|
|prev| vma | next |
|----|-----|------|
We then invoke:
/* Here vma->vm_start <= start < tmp <= (end|vma->vm_end). */
error = visit(vma, &prev, start, tmp, arg);
Where start == tmp. That is, a zero range. This is not good.
We invoke visit() which is madvise_vma_behavior() which does not check the
range (for good reason, it assumes all checks have been done before it was
called), which in turn finally calls madvise_update_vma().
The madvise_update_vma() function calls vma_modify_flags_name() in turn,
which ultimately invokes vma_modify() with... start == end.
vma_modify() calls vma_merge_existing_range() and finally we hit:
VM_WARN_ON_VMG(start >= end, vmg);
Which triggers, as start == end.
While it might be useful to add some CONFIG_DEBUG_VM asserts in these
instances to catch this kind of error, since we have just eliminated any
possibility of that happening, we will add such asserts separately as to
reduce churn and aid backporting.
Link: https://lkml.kernel.org/r/20250222161952.41957-1-lorenzo.stoakes@oracle.com
Fixes: 2f1c6611b0a8 ("mm: introduce vma_merge_struct and abstract vma_merge(),vma_modify()")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Brad Spengler <brad.spengler@opensrcsec.com>
Reported-by: Brad Spengler <brad.spengler@opensrcsec.com>
Reported-by: syzbot+46423ed8fa1f1148c6e4@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/6774c98f.050a0220.25abdd.0991.GAE@google.com/
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that we have removed the one user of mmap_region() outside of mm, make
it internal and add it to vma.c so it can be userland tested.
This ensures that all external memory mappings are performed using the
appropriate interfaces and allows us to modify memory mapping logic as we
see fit.
Additionally expand test stubs to allow for the mmap_region() code to
compile and be userland testable.
Link: https://lkml.kernel.org/r/de5a3c574d35c26237edf20a1d8652d7305709c9.1735819274.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now we have VM_WARN_ON_VMG() to provide us with considerably more debug
output when a debug assert fails, utilise it everywhere we can.
This allows us to have considerably more information to go on when things
go wrong, especially when a non-repro issue occurs as reported by
syzkaller or the like.
Link: https://lkml.kernel.org/r/986e45e9549e71284ac7a7fa878688568a94d58b.1735932169.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There seem to be several categories of calls to lru_add_drain and
lru_add_drain_all.
The first are code paths that recently allocated, swapped in, or otherwise
processed a batch of pages, and want them all on the LRU. These drain
pages that were recently allocated, probably on the local CPU.
A second category are code paths that are actively trying to reclaim,
migrate, or offline memory. These often use lru_add_drain_all, to drain
the caches on all CPUs.
However, there also seem to be some other callers where we aren't really
doing either. They are calling lru_add_drain(), despite operating on
pages that may have been allocated long ago, and quite possibly on
different CPUs.
Those calls are not likely to be effective at anything but creating lock
contention on the LRU locks.
Remove the lru_add_drain calls in the latter category.
For detailed reasoning, see [1] and [2].
Link: https://lkml.kernel.org/r/dca2824e8e88e826c6b260a831d79089b5b9c79d.camel@surriel.com [1]
Link: https://lkml.kernel.org/r/xxfhcjaq2xxcl5adastz5omkytenq7izo2e5f4q7e3ns4z6lko@odigjjc7hqrg [2]
Link: https://lkml.kernel.org/r/20241219153253.3da9e8aa@fangorn
Signed-off-by: Rik van Riel <riel@surriel.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It is of critical importance to check the return results on VMA merge (and
split), failure to do so can result in use-after-free's. This bug has
recurred, so have the compiler enforce this check to prevent any future
repetition.
Link: https://lkml.kernel.org/r/20241206225036.273103-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This was arbitrarily left in mmap.c it makes no sense being there, move it
to vma.c to render it testable.
Link: https://lkml.kernel.org/r/5e5e81807c54dfbe363edb2d431eb3d7a37fcdba.1733248985.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We build on previous work making expand_downwards() an entirely internal
function.
This logic is subtle and so it is highly useful to get it into vma.c so we
can then userland unit test.
We must additionally move acct_stack_growth() to vma.c as it is a helper
function used by both expand_downwards() and expand_upwards().
We are also then able to mark anon_vma_interval_tree_pre_update_vma() and
anon_vma_interval_tree_post_update_vma() static as these are no longer
used by anything else.
Link: https://lkml.kernel.org/r/0feb104eff85922019d4fb29280f3afb130c5204.1733248985.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We want to be able to unit test the unmapped area logic, so move it to
mm/vma.c. The wrappers which invoke this remain in place in mm/mmap.c.
In addition, naturally, update the existing test code to enable this to be
compiled in userland.
Link: https://lkml.kernel.org/r/53a57a52a64ea54e9d129d2e2abca3a538022379.1733248985.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/vma: make more mmap logic userland testable".
This series carries on the work started in previous series and
continued in commit 52956b0d7fb9 ("mm: isolate mmap internal logic to
mm/vma.c"), moving the remainder of memory mapping implementation
details logic into mm/vma.c allowing the bulk of the mapping logic to
be unit tested.
It is highly useful to do so, as this means we can both fundamentally test
this core logic, and introduce regression tests to ensure any issues
previously resolved do not recur.
Vitally, this includes the do_brk_flags() function, meaning we have both
core means of userland mapping memory now testable.
Performance testing was performed after this change given the brk() system
call's sensitivity to change, and no performance regression was observed.
The stack expansion logic is also moved into mm/vma.c, which necessitates
a change in the API exposed to the exec code, removing the invocation of
the expand_downwards() function used in get_arg_page() and instead adding
mmap_read_lock_maybe_expand() to wrap this.
This patch (of 5):
Now we have moved mmap_region() internals to mm/vma.c, making it available
to userland testing, it makes sense to do the same with brk().
This continues the pattern of VMA heavy lifting being done in mm/vma.c in
an environment where it can be subject to straightforward unit and
regression testing, with other VMA-adjacent files becoming wrappers around
this functionality.
[lorenzo.stoakes@oracle.com: add missing personality header import]
Link: https://lkml.kernel.org/r/2a717265-985f-45eb-9257-8b2857088ed4@lucifer.local
Link: https://lkml.kernel.org/r/cover.1733248985.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/3d24b9e67bb0261539ca921d1188a10a1b4d4357.1733248985.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On second merge attempt on mmap() we incorrectly discard the possibly
merged VMA, resulting in a possible use-after-free (and most certainly a
reference to the wrong VMA) in this instance in the subsequent
__mmap_complete() invocation.
Correct this mistake by reassigning vma correctly if a merge succeeds in
this case.
Link: https://lkml.kernel.org/r/20241206215229.244413-1-lorenzo.stoakes@oracle.com
Fixes: 5ac87a885aec ("mm: defer second attempt at merge on mmap()")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Suggested-by: Jann Horn <jannh@google.com>
Reported-by: syzbot+91cf8da9401355f946c3@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67536a25.050a0220.a30f1.0149.GAE@google.com/
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We mistakenly refer to len rather than len_ here. The only existing
caller passes len to the len_ parameter so this has no impact on the code,
but it is obviously incorrect to do this, so fix it.
Link: https://lkml.kernel.org/r/20241118175414.390827-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Jann Horn <jannh@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There have been no reported infinite loops in the tree, but checking the
detection of an infinite loop during validation is simple enough. Add the
detection to the validate_mm() function so that error reports are clear
and don't just report stalls.
This does not protect against internal maple tree issues, but it does
detect too many vmas being returned from the tree.
The variance of +10 is to allow for the debugging output to be more useful
for nearly correct counts. In the event of more than 10 over the
map_count, the count will be set to -1 for easier identification of a
potential infinite loop.
Note that the mmap lock is held to ensure a consistent tree state during
the validation process.
[akpm@linux-foundation.org: add comment]
Link: https://lkml.kernel.org/r/20241031193608.1965366-1-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
By this point can_vma_merge_right() must have returned true, which implies
can_vma_merge_before() also returned true, which already asserts that the
pgoff is as expected for a merge with the following VMA, thus this
assignment is redundant.
Below is a more detail explanation.
Current definition of can_vma_merge_right() is:
static bool can_vma_merge_right(struct vma_merge_struct *vmg,
bool can_merge_left)
{
if (!vmg->next || vmg->end != vmg->next->vm_start ||
!can_vma_merge_before(vmg))
return false;
...
}
And:
static bool can_vma_merge_before(struct vma_merge_struct *vmg)
{
pgoff_t pglen = PHYS_PFN(vmg->end - vmg->start);
...
if (vmg->next->vm_pgoff == vmg->pgoff + pglen)
return true;
...
}
Which implies vmg->pgoff == vmg->next->vm_pgoff - pglen.
None of these values are changed between the check and prior assignment,
so this was an entirely redundant assignment.
[akpm@linux-foundation.org: remove now-unused local]
[lorenzo.stoakes@oracle.com: rephrase the changelog]
Link: https://lkml.kernel.org/r/20241024093347.18057-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Rather than trying to merge again when ostensibly allocating a new VMA,
instead defer until the VMA is added and attempt to merge the existing
range.
This way we have no complicated unwinding logic midway through the process
of mapping the VMA.
In addition this removes limitations on the VMA not being able to be the
first in the virtual memory address space which was previously implicitly
required.
In theory, for this very same reason, we should unconditionally attempt
merge here, however this is likely to have a performance impact so it is
better to avoid this given the unlikely outcome of a merge.
[lorenzo.stoakes@oracle.com: remove unnecessary indirection]
Link: https://lkml.kernel.org/r/5106696d-e625-4d8a-8545-9d1430301730@lucifer.local
Link: https://lkml.kernel.org/r/d4f84502605d7651ac114587f507395c0fc76004.1729858176.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The only place where this was used was in mmap_region(), which we have now
adjusted to not require this to be performed (we reset ourselves in
effect).
It also created a dangerous assumption that VMG state could be safely
reused after a merge, at which point it may have been mutated in
unexpected ways, leading to subtle bugs.
Note that it was discovered by Wei Yang that there was also an error in
this code - we are comparing vmg->vma with prev after setting it to NULL.
This however had no impact, as we previously reset VMA iterator state
before attempting merge again, but it was useless effort.
In any case, this patch removes all of the logic so also eliminates this
wasted effort.
Link: https://lkml.kernel.org/r/5d9a59eee6498ae017cc87d89aa723de7179f75d.1729858176.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We have seen bugs and resource leaks arise from the complexity of the
__mmap_region() function. This, and the generally deeply fragile error
handling logic and complexity which makes understanding the function
difficult make it highly desirable to refactor it into something readable.
Achieve this by separating the function into smaller logical parts which
are easier to understand and follow, and which importantly very
significantly simplify the error handling.
Note that we now call vms_abort_munmap_vmas() in more error paths than we
used to, however in cases where no abort need occur, vms->nr_pages will be
equal to zero and we simply exit this function without doing more than we
would have done previously.
Importantly, the invocation of the driver mmap hook via mmap_file() now
has very simple and obvious handling (this was previously the most
problematic part of the mmap() operation).
Use a generalised stack-based 'mmap state' to thread through values and
also retrieve state as needed.
Also avoid ever relying on vma merge (vmg) state after a merge is
attempted, instead maintain meaningful state in the mmap state and
establish vmg state as and when required.
This avoids any subtle bugs arising from merge logic mutating this state
and mmap_region() logic later relying upon it.
Link: https://lkml.kernel.org/r/25bd2edc3275450f448cbfe0756ce2a7cd06810f.1729858176.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In previous commits we effected improvements to the mmap() logic in
mmap_region() and its newly introduced internal implementation function
__mmap_region().
However as these changes are intended to be backported, we kept the delta
as small as is possible and made as few changes as possible to the newly
introduced mm/vma.* files.
Take the opportunity to move this logic to mm/vma.c which not only
isolates it, but also makes it available for later userland testing which
can help us catch such logic errors far earlier.
Link: https://lkml.kernel.org/r/93fc2c3aa37dd30590b7e4ee067dfd832007bf7e.1729858176.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Performance analysis using branch annotation on a fleet of 200 hosts
running web servers revealed that the 'unlikely' hint in
vms_gather_munmap_vmas() was 100% consistently incorrect. In all observed
cases, the branch behavior contradicted the hint.
Remove the 'unlikely' qualifier from the condition checking 'vms->uf'. By
doing so, we allow the compiler to make optimization decisions based on
its own heuristics and profiling data, rather than relying on a static
hint that has proven to be inaccurate in real-world scenarios.
Link: https://lkml.kernel.org/r/20241004164832.218681-1-leitao@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Incorrect invocation of VMA callbacks when the VMA is no longer in a
consistent state is bug prone and risky to perform.
With regards to the important vm_ops->close() callback We have gone to
great lengths to try to track whether or not we ought to close VMAs.
Rather than doing so and risking making a mistake somewhere, instead
unconditionally close and reset vma->vm_ops to an empty dummy operations
set with a NULL .close operator.
We introduce a new function to do so - vma_close() - and simplify existing
vms logic which tracked whether we needed to close or not.
This simplifies the logic, avoids incorrect double-calling of the .close()
callback and allows us to update error paths to simply call vma_close()
unconditionally - making VMA closure idempotent.
Link: https://lkml.kernel.org/r/28e89dda96f68c505cb6f8e9fc9b57c3e9f74b42.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f6562884 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Jann Horn <jannh@google.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "introduce VMA merge mode to improve brk() performance".
A ~5% performance regression was discovered on the
aim9.brk_test.ops_per_sec by the linux kernel test bot [0].
In the past to satisfy brk() performance we duplicated VMA expansion code
and special-cased do_brk_flags(). This is however horrid and undoes work
to abstract this logic, so in resolving the issue I have endeavoured to
avoid this.
Investigating further I was able to observe that the use of a
vma_iter_next_range() and vma_prev() pair, causing an unnecessary maple
tree walk. In addition there is work that we do that is simply
unnecessary for brk().
Therefore, add a special VMA merge mode VMG_FLAG_JUST_EXPAND to avoid
doing any of this - it assumes the VMA iterator is pointing at the
previous VMA and which skips logic that brk() does not require.
This mostly eliminates the performance regression reducing it to ~2% which
is in the realm of noise. In addition, the will-it-scale test brk2,
written to be more representative of real-world brk() usage, shows a
modest performance improvement - which gives me confidence that we are not
meaningfully regressing real workloads here.
This series includes a test asserting that the 'just expand' mode works as
expected.
With many thanks to Oliver Sang for helping with performance testing of
candidate patch sets!
[0]:https://lore.kernel.org/linux-mm/202409301043.629bea78-oliver.sang@intel.com
This patch (of 2):
We know in advance that do_brk_flags() wants only to perform a VMA
expansion (if the prior VMA is compatible), and that we assume no
mergeable VMA follows it.
These are the semantics of this function prior to the recent rewrite of
the VMA merging logic, however we are now doing more work than necessary -
positioning the VMA iterator at the prior VMA and performing tasks that
are not required.
Add a new field to the vmg struct to permit merge flags and add a new
merge flag VMG_FLAG_JUST_EXPAND which implies this behaviour, and have
do_brk_flags() use this.
This fixes a reported performance regression in a brk() benchmarking suite.
Link: https://lkml.kernel.org/r/cover.1729174352.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/4e65d4395e5841c5acf8470dbcb714016364fd39.1729174352.git.lorenzo.stoakes@oracle.com
Fixes: cacded5e42b9 ("mm: avoid using vma_merge() for new VMAs")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/linux-mm/202409301043.629bea78-oliver.sang@intel.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
__split_vma() and mas_store_gfp() returns several types of errno on
failure so don't ignore them in vms_gather_munmap_vmas(). For example,
__split_vma() returns -EINVAL when an unaligned huge page is unmapped.
This issue is reproduced by ltp memfd_create03 test.
Don't initialise the error variable and assign it when a failure actually
occurs.
[akpm@linux-foundation.org: fix whitespace, per Liam]
Link: https://lkml.kernel.org/r/20240909125621.1994-1-ice_yangxiao@163.com
Fixes: 6898c9039bc8 ("mm/vma: extract the gathering of vmas from do_vmi_align_munmap()")
Signed-off-by: Xiao Yang <ice_yangxiao@163.com>
Suggested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202409081536.d283a0fb-oliver.sang@intel.com
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In commit 714965ca8252 ("mm/mmap: start distinguishing if vma can be
removed in mergeability test") we relaxed the VMA merge rules for VMAs
possessing a vm_ops->close() hook, permitting this operation in instances
where we wouldn't delete the VMA as part of the merge operation.
This was later corrected in commit fc0c8f9089c2 ("mm, mmap: fix
vma_merge() case 7 with vma_ops->close") to account for a subtle case that
the previous commit had not taken into account.
In both instances, we first rely on is_mergeable_vma() to determine
whether we might be dealing with a VMA that might be removed, taking
advantage of the fact that a 'previous' VMA will never be deleted, only
VMAs that follow it.
The second patch corrects the instance where a merge of the previous VMA
into a subsequent one did not correctly check whether the subsequent VMA
had a vm_ops->close() handler.
Both changes prevent merge cases that are actually permissible (for
instance a merge of a VMA into a following VMA with a vm_ops->close(), but
with no previous VMA, which would result in the next VMA being extended,
not deleted).
In addition, both changes fail to consider the case where a VMA that would
otherwise be merged with the previous and next VMA might have
vm_ops->close(), on the assumption that for this to be the case, all three
would have to have the same vma->vm_file to be mergeable and thus the same
vm_ops.
And in addition both changes operate at 50,000 feet, trying to guess
whether a VMA will be deleted.
As we have majorly refactored the VMA merge operation and de-duplicated
code to the point where we know precisely where deletions will occur, this
patch removes the aforementioned checks altogether and instead explicitly
checks whether a VMA will be deleted.
In cases where a reduced merge is still possible (where we merge both
previous and next VMA but the next VMA has a vm_ops->close hook, meaning
we could just merge the previous and current VMA), we do so, otherwise the
merge is not permitted.
We take advantage of our userland testing to assert that this functions
correctly - replacing the previous limited vm_ops->close() tests with
tests for every single case where we delete a VMA.
We also update all testing for both new and modified VMAs to set
vma->vm_ops->close() in every single instance where this would not prevent
the merge, to assert that we never do so.
Link: https://lkml.kernel.org/r/9f96b8cfeef3d14afabddac3d6144afdfbef2e22.1725040657.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
