summaryrefslogtreecommitdiff
path: root/net/bridge
AgeCommit message (Collapse)Author
3 daysMerge tag 'net-next-6.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ...
4 daysMerge tag 'driver-core-6.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core Pull driver core updates from Danilo Krummrich: "debugfs: - Remove unneeded debugfs_file_{get,put}() instances - Remove last remnants of debugfs_real_fops() - Allow storing non-const void * in struct debugfs_inode_info::aux sysfs: - Switch back to attribute_group::bin_attrs (treewide) - Switch back to bin_attribute::read()/write() (treewide) - Constify internal references to 'struct bin_attribute' Support cache-ids for device-tree systems: - Add arch hook arch_compact_of_hwid() - Use arch_compact_of_hwid() to compact MPIDR values on arm64 Rust: - Device: - Introduce CoreInternal device context (for bus internal methods) - Provide generic drvdata accessors for bus devices - Provide Driver::unbind() callbacks - Use the infrastructure above for auxiliary, PCI and platform - Implement Device::as_bound() - Rename Device::as_ref() to Device::from_raw() (treewide) - Implement fwnode and device property abstractions - Implement example usage in the Rust platform sample driver - Devres: - Remove the inner reference count (Arc) and use pin-init instead - Replace Devres::new_foreign_owned() with devres::register() - Require T to be Send in Devres<T> - Initialize the data kept inside a Devres last - Provide an accessor for the Devres associated Device - Device ID: - Add support for ACPI device IDs and driver match tables - Split up generic device ID infrastructure - Use generic device ID infrastructure in net::phy - DMA: - Implement the dma::Device trait - Add DMA mask accessors to dma::Device - Implement dma::Device for PCI and platform devices - Use DMA masks from the DMA sample module - I/O: - Implement abstraction for resource regions (struct resource) - Implement resource-based ioremap() abstractions - Provide platform device accessors for I/O (remap) requests - Misc: - Support fallible PinInit types in Revocable - Implement Wrapper<T> for Opaque<T> - Merge pin-init blanket dependencies (for Devres) Misc: - Fix OF node leak in auxiliary_device_create() - Use util macros in device property iterators - Improve kobject sample code - Add device_link_test() for testing device link flags - Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits - Hint to prefer container_of_const() over container_of()" * tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits) rust: io: fix broken intra-doc links to `platform::Device` rust: io: fix broken intra-doc link to missing `flags` module rust: io: mem: enable IoRequest doc-tests rust: platform: add resource accessors rust: io: mem: add a generic iomem abstraction rust: io: add resource abstraction rust: samples: dma: set DMA mask rust: platform: implement the `dma::Device` trait rust: pci: implement the `dma::Device` trait rust: dma: add DMA addressing capabilities rust: dma: implement `dma::Device` trait rust: net::phy Change module_phy_driver macro to use module_device_table macro rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id rust: device_id: split out index support into a separate trait device: rust: rename Device::as_ref() to Device::from_raw() arm64: cacheinfo: Provide helper to compress MPIDR value into u32 cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id cacheinfo: Set cache 'id' based on DT data container_of: Document container_of() is not to be used in new code driver core: auxiliary bus: fix OF node leak ...
8 daysnetfilter: Exclude LEGACY TABLES on PREEMPT_RT.Pablo Neira Ayuso
The seqcount xt_recseq is used to synchronize the replacement of xt_table::private in xt_replace_table() against all readers such as ipt_do_table() To ensure that there is only one writer, the writing side disables bottom halves. The sequence counter can be acquired recursively. Only the first invocation modifies the sequence counter (signaling that a writer is in progress) while the following (recursive) writer does not modify the counter. The lack of a proper locking mechanism for the sequence counter can lead to live lock on PREEMPT_RT if the high prior reader preempts the writer. Additionally if the per-CPU lock on PREEMPT_RT is removed from local_bh_disable() then there is no synchronisation for the per-CPU sequence counter. The affected code is "just" the legacy netfilter code which is replaced by "netfilter tables". That code can be disabled without sacrificing functionality because everything is provided by the newer implementation. This will only requires the usage of the "-nft" tools instead of the "-legacy" ones. The long term plan is to remove the legacy code so lets accelerate the progress. Relax dependencies on iptables legacy, replace select with depends on, this should cause no harm to existing kernel configs and users can still toggle IP{6}_NF_IPTABLES_LEGACY in any case. Make EBTABLES_LEGACY, IPTABLES_LEGACY and ARPTABLES depend on NETFILTER_XTABLES_LEGACY. Hide xt_recseq and its users, xt_register_table() and xt_percpu_counter_alloc() behind NETFILTER_XTABLES_LEGACY. Let NETFILTER_XTABLES_LEGACY depend on !PREEMPT_RT. This will break selftest expecing the legacy options enabled and will be addressed in a following patch. Co-developed-by: Florian Westphal <fw@strlen.de> Co-developed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2025-07-18net: s/dev_get_flags/netif_get_flags/Stanislav Fomichev
Commit cc34acd577f1 ("docs: net: document new locking reality") introduced netif_ vs dev_ function semantics: the former expects locked netdev, the latter takes care of the locking. We don't strictly follow this semantics on either side, but there are more dev_xxx handlers now that don't fit. Rename them to netif_xxx where appropriate. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250717172333.1288349-6-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-18net: s/dev_pre_changeaddr_notify/netif_pre_changeaddr_notify/Stanislav Fomichev
Commit cc34acd577f1 ("docs: net: document new locking reality") introduced netif_ vs dev_ function semantics: the former expects locked netdev, the latter takes care of the locking. We don't strictly follow this semantics on either side, but there are more dev_xxx handlers now that don't fit. Rename them to netif_xxx where appropriate. netif_pre_changeaddr_notify is used only by ipvlan/bond, so move it into NETDEV_INTERNAL namespace. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250717172333.1288349-4-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-18net: s/dev_get_port_parent_id/netif_get_port_parent_id/Stanislav Fomichev
Commit cc34acd577f1 ("docs: net: document new locking reality") introduced netif_ vs dev_ function semantics: the former expects locked netdev, the latter takes care of the locking. We don't strictly follow this semantics on either side, but there are more dev_xxx handlers now that don't fit. Rename them to netif_xxx where appropriate. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250717172333.1288349-2-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17net: bridge: Do not offload IGMP/MLD messagesJoseph Huang
Do not offload IGMP/MLD messages as it could lead to IGMP/MLD Reports being unintentionally flooded to Hosts. Instead, let the bridge decide where to send these IGMP/MLD messages. Consider the case where the local host is sending out reports in response to a remote querier like the following: mcast-listener-process (IP_ADD_MEMBERSHIP) \ br0 / \ swp1 swp2 | | QUERIER SOME-OTHER-HOST In the above setup, br0 will want to br_forward() reports for mcast-listener-process's group(s) via swp1 to QUERIER; but since the source hwdom is 0, the report is eligible for tx offloading, and is flooded by hardware to both swp1 and swp2, reaching SOME-OTHER-HOST as well. (Example and illustration provided by Tobias.) Fixes: 472111920f1c ("net: bridge: switchdev: allow the TX data plane forwarding to be offloaded") Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250716153551.1830255-1-Joseph.Huang@garmin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-23bridge: mcast: Fix use-after-free during router port configurationIdo Schimmel
The bridge maintains a global list of ports behind which a multicast router resides. The list is consulted during forwarding to ensure multicast packets are forwarded to these ports even if the ports are not member in the matching MDB entry. When per-VLAN multicast snooping is enabled, the per-port multicast context is disabled on each port and the port is removed from the global router port list: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 # ip link add name dummy1 up master br1 type dummy # ip link set dev dummy1 type bridge_slave mcast_router 2 $ bridge -d mdb show | grep router router ports on br1: dummy1 # ip link set dev br1 type bridge mcast_vlan_snooping 1 $ bridge -d mdb show | grep router However, the port can be re-added to the global list even when per-VLAN multicast snooping is enabled: # ip link set dev dummy1 type bridge_slave mcast_router 0 # ip link set dev dummy1 type bridge_slave mcast_router 2 $ bridge -d mdb show | grep router router ports on br1: dummy1 Since commit 4b30ae9adb04 ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions"), when per-VLAN multicast snooping is enabled, multicast disablement on a port will disable the per-{port, VLAN} multicast contexts and not the per-port one. As a result, a port will remain in the global router port list even after it is deleted. This will lead to a use-after-free [1] when the list is traversed (when adding a new port to the list, for example): # ip link del dev dummy1 # ip link add name dummy2 up master br1 type dummy # ip link set dev dummy2 type bridge_slave mcast_router 2 Similarly, stale entries can also be found in the per-VLAN router port list. When per-VLAN multicast snooping is disabled, the per-{port, VLAN} contexts are disabled on each port and the port is removed from the per-VLAN router port list: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 # ip link add name dummy1 up master br1 type dummy # bridge vlan add vid 2 dev dummy1 # bridge vlan global set vid 2 dev br1 mcast_snooping 1 # bridge vlan set vid 2 dev dummy1 mcast_router 2 $ bridge vlan global show dev br1 vid 2 | grep router router ports: dummy1 # ip link set dev br1 type bridge mcast_vlan_snooping 0 $ bridge vlan global show dev br1 vid 2 | grep router However, the port can be re-added to the per-VLAN list even when per-VLAN multicast snooping is disabled: # bridge vlan set vid 2 dev dummy1 mcast_router 0 # bridge vlan set vid 2 dev dummy1 mcast_router 2 $ bridge vlan global show dev br1 vid 2 | grep router router ports: dummy1 When the VLAN is deleted from the port, the per-{port, VLAN} multicast context will not be disabled since multicast snooping is not enabled on the VLAN. As a result, the port will remain in the per-VLAN router port list even after it is no longer member in the VLAN. This will lead to a use-after-free [2] when the list is traversed (when adding a new port to the list, for example): # ip link add name dummy2 up master br1 type dummy # bridge vlan add vid 2 dev dummy2 # bridge vlan del vid 2 dev dummy1 # bridge vlan set vid 2 dev dummy2 mcast_router 2 Fix these issues by removing the port from the relevant (global or per-VLAN) router port list in br_multicast_port_ctx_deinit(). The function is invoked during port deletion with the per-port multicast context and during VLAN deletion with the per-{port, VLAN} multicast context. Note that deleting the multicast router timer is not enough as it only takes care of the temporary multicast router states (1 or 3) and not the permanent one (2). [1] BUG: KASAN: slab-out-of-bounds in br_multicast_add_router.part.0+0x3f1/0x560 Write of size 8 at addr ffff888004a67328 by task ip/384 [...] Call Trace: <TASK> dump_stack_lvl+0x6f/0xa0 print_address_description.constprop.0+0x6f/0x350 print_report+0x108/0x205 kasan_report+0xdf/0x110 br_multicast_add_router.part.0+0x3f1/0x560 br_multicast_set_port_router+0x74e/0xac0 br_setport+0xa55/0x1870 br_port_slave_changelink+0x95/0x120 __rtnl_newlink+0x5e8/0xa40 rtnl_newlink+0x627/0xb00 rtnetlink_rcv_msg+0x6fb/0xb70 netlink_rcv_skb+0x11f/0x350 netlink_unicast+0x426/0x710 netlink_sendmsg+0x75a/0xc20 __sock_sendmsg+0xc1/0x150 ____sys_sendmsg+0x5aa/0x7b0 ___sys_sendmsg+0xfc/0x180 __sys_sendmsg+0x124/0x1c0 do_syscall_64+0xbb/0x360 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] BUG: KASAN: slab-use-after-free in br_multicast_add_router.part.0+0x378/0x560 Read of size 8 at addr ffff888009f00840 by task bridge/391 [...] Call Trace: <TASK> dump_stack_lvl+0x6f/0xa0 print_address_description.constprop.0+0x6f/0x350 print_report+0x108/0x205 kasan_report+0xdf/0x110 br_multicast_add_router.part.0+0x378/0x560 br_multicast_set_port_router+0x6f9/0xac0 br_vlan_process_options+0x8b6/0x1430 br_vlan_rtm_process_one+0x605/0xa30 br_vlan_rtm_process+0x396/0x4c0 rtnetlink_rcv_msg+0x2f7/0xb70 netlink_rcv_skb+0x11f/0x350 netlink_unicast+0x426/0x710 netlink_sendmsg+0x75a/0xc20 __sock_sendmsg+0xc1/0x150 ____sys_sendmsg+0x5aa/0x7b0 ___sys_sendmsg+0xfc/0x180 __sys_sendmsg+0x124/0x1c0 do_syscall_64+0xbb/0x360 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Fixes: 2796d846d74a ("net: bridge: vlan: convert mcast router global option to per-vlan entry") Fixes: 4b30ae9adb04 ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions") Reported-by: syzbot+7bfa4b72c6a5da128d32@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/684c18bd.a00a0220.279073.000b.GAE@google.com/T/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250619182228.1656906-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17sysfs: treewide: switch back to bin_attribute::read()/write()Thomas Weißschuh
The bin_attribute argument of bin_attribute::read() is now const. This makes the _new() callbacks unnecessary. Switch all users back. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-3-724bfcf05b99@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-05-28Merge tag 'net-next-6.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Implement the Device Memory TCP transmit path, allowing zero-copy data transmission on top of TCP from e.g. GPU memory to the wire. - Move all the IPv6 routing tables management outside the RTNL scope, under its own lock and RCU. The route control path is now 3x times faster. - Convert queue related netlink ops to instance lock, reducing again the scope of the RTNL lock. This improves the control plane scalability. - Refactor the software crc32c implementation, removing unneeded abstraction layers and improving significantly the related micro-benchmarks. - Optimize the GRO engine for UDP-tunneled traffic, for a 10% performance improvement in related stream tests. - Cover more per-CPU storage with local nested BH locking; this is a prep work to remove the current per-CPU lock in local_bh_disable() on PREMPT_RT. - Introduce and use nlmsg_payload helper, combining buffer bounds verification with accessing payload carried by netlink messages. Netfilter: - Rewrite the procfs conntrack table implementation, improving considerably the dump performance. A lot of user-space tools still use this interface. - Implement support for wildcard netdevice in netdev basechain and flowtables. - Integrate conntrack information into nft trace infrastructure. - Export set count and backend name to userspace, for better introspection. BPF: - BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops programs and can be controlled in similar way to traditional qdiscs using the "tc qdisc" command. - Refactor the UDP socket iterator, addressing long standing issues WRT duplicate hits or missed sockets. Protocols: - Improve TCP receive buffer auto-tuning and increase the default upper bound for the receive buffer; overall this improves the single flow maximum thoughput on 200Gbs link by over 60%. - Add AFS GSSAPI security class to AF_RXRPC; it provides transport security for connections to the AFS fileserver and VL server. - Improve TCP multipath routing, so that the sources address always matches the nexthop device. - Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS, and thus preventing DoS caused by passing around problematic FDs. - Retire DCCP socket. DCCP only receives updates for bugs, and major distros disable it by default. Its removal allows for better organisation of TCP fields to reduce the number of cache lines hit in the fast path. - Extend TCP drop-reason support to cover PAWS checks. Driver API: - Reorganize PTP ioctl flag support to require an explicit opt-in for the drivers, avoiding the problem of drivers not rejecting new unsupported flags. - Converted several device drivers to timestamping APIs. - Introduce per-PHY ethtool dump helpers, improving the support for dump operations targeting PHYs. Tests and tooling: - Add support for classic netlink in user space C codegen, so that ynl-c can now read, create and modify links, routes addresses and qdisc layer configuration. - Add ynl sub-types for binary attributes, allowing ynl-c to output known struct instead of raw binary data, clarifying the classic netlink output. - Extend MPTCP selftests to improve the code-coverage. - Add tests for XDP tail adjustment in AF_XDP. New hardware / drivers: - OpenVPN virtual driver: offload OpenVPN data channels processing to the kernel-space, increasing the data transfer throughput WRT the user-space implementation. - Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC. - Broadcom asp-v3.0 ethernet driver. - AMD Renoir ethernet device. - ReakTek MT9888 2.5G ethernet PHY driver. - Aeonsemi 10G C45 PHYs driver. Drivers: - Ethernet high-speed NICs: - nVidia/Mellanox (mlx5): - refactor the steering table handling to significantly reduce the amount of memory used - add support for complex matches in H/W flow steering - improve flow streeing error handling - convert to netdev instance locking - Intel (100G, ice, igb, ixgbe, idpf): - ice: add switchdev support for LLDP traffic over VF - ixgbe: add firmware manipulation and regions devlink support - igb: introduce support for frame transmission premption - igb: adds persistent NAPI configuration - idpf: introduce RDMA support - idpf: add initial PTP support - Meta (fbnic): - extend hardware stats coverage - add devlink dev flash support - Broadcom (bnxt): - add support for RX-side device memory TCP - Wangxun (txgbe): - implement support for udp tunnel offload - complete PTP and SRIOV support for AML 25G/10G devices - Ethernet NICs embedded and virtual: - Google (gve): - add device memory TCP TX support - Amazon (ena): - support persistent per-NAPI config - Airoha: - add H/W support for L2 traffic offload - add per flow stats for flow offloading - RealTek (rtl8211): add support for WoL magic packet - Synopsys (stmmac): - dwmac-socfpga 1000BaseX support - add Loongson-2K3000 support - introduce support for hardware-accelerated VLAN stripping - Broadcom (bcmgenet): - expose more H/W stats - Freescale (enetc, dpaa2-eth): - enetc: add MAC filter, VLAN filter RSS and loopback support - dpaa2-eth: convert to H/W timestamping APIs - vxlan: convert FDB table to rhashtable, for better scalabilty - veth: apply qdisc backpressure on full ring to reduce TX drops - Ethernet switches: - Microchip (kzZ88x3): add ETS scheduler support - Ethernet PHYs: - RealTek (rtl8211): - add support for WoL magic packet - add support for PHY LEDs - CAN: - Adds RZ/G3E CANFD support to the rcar_canfd driver. - Preparatory work for CAN-XL support. - Add self-tests framework with support for CAN physical interfaces. - WiFi: - mac80211: - scan improvements with multi-link operation (MLO) - Qualcomm (ath12k): - enable AHB support for IPQ5332 - add monitor interface support to QCN9274 - add multi-link operation support to WCN7850 - add 802.11d scan offload support to WCN7850 - monitor mode for WCN7850, better 6 GHz regulatory - Qualcomm (ath11k): - restore hibernation support - MediaTek (mt76): - WiFi-7 improvements - implement support for mt7990 - Intel (iwlwifi): - enhanced multi-link single-radio (EMLSR) support on 5 GHz links - rework device configuration - RealTek (rtw88): - improve throughput for RTL8814AU - RealTek (rtw89): - add multi-link operation support - STA/P2P concurrency improvements - support different SAR configs by antenna - Bluetooth: - introduce HCI Driver protocol - btintel_pcie: do not generate coredump for diagnostic events - btusb: add HCI Drv commands for configuring altsetting - btusb: add RTL8851BE device 0x0bda:0xb850 - btusb: add new VID/PID 13d3/3584 for MT7922 - btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925 - btnxpuart: implement host-wakeup feature" * tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits) selftests/bpf: Fix bpf selftest build warning selftests: netfilter: Fix skip of wildcard interface test net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames net: openvswitch: Fix the dead loop of MPLS parse calipso: Don't call calipso functions for AF_INET sk. selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem net_sched: hfsc: Address reentrant enqueue adding class to eltree twice octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback octeontx2-pf: QOS: Perform cache sync on send queue teardown net: mana: Add support for Multi Vports on Bare metal net: devmem: ncdevmem: remove unused variable net: devmem: ksft: upgrade rx test to send 1K data net: devmem: ksft: add 5 tuple FS support net: devmem: ksft: add exit_wait to make rx test pass net: devmem: ksft: add ipv4 support net: devmem: preserve sockc_err page_pool: fix ugly page_pool formatting net: devmem: move list_add to net_devmem_bind_dmabuf. selftests: netfilter: nft_queue.sh: include file transfer duration in log message net: phy: mscc: Fix memory leak when using one step timestamping ...
2025-05-27Merge tag 'timers-cleanups-2025-05-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanups from Thomas Gleixner: "Another set of timer API cleanups: - Convert init_timer*(), try_to_del_timer_sync() and destroy_timer_on_stack() over to the canonical timer_*() namespace convention. There is another large conversion pending, which has not been included because it would have caused a gazillion of merge conflicts in next. The conversion scripts will be run towards the end of the merge window and a pull request sent once all conflict dependencies have been merged" * tag 'timers-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: treewide, timers: Rename destroy_timer_on_stack() as timer_destroy_on_stack() treewide, timers: Rename try_to_del_timer_sync() as timer_delete_sync_try() timers: Rename init_timers() as timers_init() timers: Rename NEXT_TIMER_MAX_DELTA as TIMER_NEXT_MAX_DELTA timers: Rename __init_timer_on_stack() as __timer_init_on_stack() timers: Rename __init_timer() as __timer_init() timers: Rename init_timer_on_stack_key() as timer_init_key_on_stack() timers: Rename init_timer_key() as timer_init_key()
2025-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc8). Conflicts: 80f2ab46c2ee ("irdma: free iwdev->rf after removing MSI-X") 4bcc063939a5 ("ice, irdma: fix an off by one in error handling code") c24a65b6a27c ("iidc/ice/irdma: Update IDC to support multiple consumers") https://lore.kernel.org/20250513130630.280ee6c5@canb.auug.org.au No extra adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-16bridge: netfilter: Fix forwarding of fragmented packetsIdo Schimmel
When netfilter defrag hooks are loaded (due to the presence of conntrack rules, for example), fragmented packets entering the bridge will be defragged by the bridge's pre-routing hook (br_nf_pre_routing() -> ipv4_conntrack_defrag()). Later on, in the bridge's post-routing hook, the defragged packet will be fragmented again. If the size of the largest fragment is larger than what the kernel has determined as the destination MTU (using ip_skb_dst_mtu()), the defragged packet will be dropped. Before commit ac6627a28dbf ("net: ipv4: Consolidate ipv4_mtu and ip_dst_mtu_maybe_forward"), ip_skb_dst_mtu() would return dst_mtu() as the destination MTU. Assuming the dst entry attached to the packet is the bridge's fake rtable one, this would simply be the bridge's MTU (see fake_mtu()). However, after above mentioned commit, ip_skb_dst_mtu() ends up returning the route's MTU stored in the dst entry's metrics. Ideally, in case the dst entry is the bridge's fake rtable one, this should be the bridge's MTU as the bridge takes care of updating this metric when its MTU changes (see br_change_mtu()). Unfortunately, the last operation is a no-op given the metrics attached to the fake rtable entry are marked as read-only. Therefore, ip_skb_dst_mtu() ends up returning 1500 (the initial MTU value) and defragged packets are dropped during fragmentation when dealing with large fragments and high MTU (e.g., 9k). Fix by moving the fake rtable entry's metrics to be per-bridge (in a similar fashion to the fake rtable entry itself) and marking them as writable, thereby allowing MTU changes to be reflected. Fixes: 62fa8a846d7d ("net: Implement read-only protection and COW'ing of metrics.") Fixes: 33eb9873a283 ("bridge: initialize fake_rtable metrics") Reported-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Closes: https://lore.kernel.org/netdev/PH0PR10MB4504888284FF4CBA648197D0ACB82@PH0PR10MB4504.namprd10.prod.outlook.com/ Tested-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250515084848.727706-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-08treewide, timers: Rename try_to_del_timer_sync() as timer_delete_sync_try()Ingo Molnar
Move this API to the canonical timer_*() namespace. Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250507175338.672442-9-mingo@kernel.org
2025-05-05netfilter: bridge: Move specific fragmented packet to slow_path instead of ↵Huajian Yang
dropping it The config NF_CONNTRACK_BRIDGE will change the bridge forwarding for fragmented packets. The original bridge does not know that it is a fragmented packet and forwards it directly, after NF_CONNTRACK_BRIDGE is enabled, function nf_br_ip_fragment and br_ip6_fragment will check the headroom. In original br_forward, insufficient headroom of skb may indeed exist, but there's still a way to save the skb in the device driver after dev_queue_xmit.So droping the skb will change the original bridge forwarding in some cases. Fixes: 3c171f496ef5 ("netfilter: bridge: add connection tracking system") Signed-off-by: Huajian Yang <huajianyang@asrmicro.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2025-04-23net: bridge: mcast: update multicast contex when vlan state is changedYong Wang
When the vlan STP state is changed, which could be manipulated by "bridge vlan" commands, similar to port STP state, this also impacts multicast behaviors such as igmp query. In the scenario of per-VLAN snooping, there's a need to update the corresponding multicast context to re-arm the port query timer when vlan state becomes "forwarding" etc. Update br_vlan_set_state() function to enable vlan multicast context in such scenario. Before the patch, the IGMP query does not happen in the last step of the following test sequence, i.e. no growth for tx counter: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1 # bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0 # ip link add name swp1 up master br1 type dummy # sleep 1 # bridge vlan set vid 1 dev swp1 state 4 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # sleep 1 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # bridge vlan set vid 1 dev swp1 state 3 # sleep 2 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 After the patch, the IGMP query happens in the last step of the test: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1 # bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0 # ip link add name swp1 up master br1 type dummy # sleep 1 # bridge vlan set vid 1 dev swp1 state 4 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # sleep 1 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # bridge vlan set vid 1 dev swp1 state 3 # sleep 2 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 3 Signed-off-by: Yong Wang <yongwang@nvidia.com> Reviewed-by: Andy Roulin <aroulin@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-04-23net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functionsYong Wang
When a bridge port STP state is changed from BLOCKING/DISABLED to FORWARDING, the port's igmp query timer will NOT re-arm itself if the bridge has been configured as per-VLAN multicast snooping. Solve this by choosing the correct multicast context(s) to enable/disable port multicast based on whether per-VLAN multicast snooping is enabled or not, i.e. using per-{port, VLAN} context in case of per-VLAN multicast snooping by re-implementing br_multicast_enable_port() and br_multicast_disable_port() functions. Before the patch, the IGMP query does not happen in the last step of the following test sequence, i.e. no growth for tx counter: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1 # bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0 # ip link add name swp1 up master br1 type dummy # bridge link set dev swp1 state 0 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # sleep 1 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # bridge link set dev swp1 state 3 # sleep 2 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 After the patch, the IGMP query happens in the last step of the test: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 mcast_querier 1 mcast_stats_enabled 1 # bridge vlan global set vid 1 dev br1 mcast_snooping 1 mcast_querier 1 mcast_query_interval 100 mcast_startup_query_count 0 # ip link add name swp1 up master br1 type dummy # bridge link set dev swp1 state 0 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # sleep 1 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 1 # bridge link set dev swp1 state 3 # sleep 2 # ip -j -p stats show dev swp1 group xstats_slave subgroup bridge suite mcast | jq '.[]["multicast"]["igmp_queries"]["tx_v2"]' 3 Signed-off-by: Yong Wang <yongwang@nvidia.com> Reviewed-by: Andy Roulin <aroulin@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc3). No conflicts. Adjacent changes: tools/net/ynl/pyynl/ynl_gen_c.py 4d07bbf2d456 ("tools: ynl-gen: don't declare loop iterator in place") 7e8ba0c7de2b ("tools: ynl: don't use genlmsghdr in classic netlink") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-16net: bridge: switchdev: do not notify new brentries as changedJonas Gorski
When adding a bridge vlan that is pvid or untagged after the vlan has already been added to any other switchdev backed port, the vlan change will be propagated as changed, since the flags change. This causes the vlan to not be added to the hardware for DSA switches, since the DSA handler ignores any vlans for the CPU or DSA ports that are changed. E.g. the following order of operations would work: $ ip link add swbridge type bridge vlan_filtering 1 vlan_default_pvid 0 $ ip link set lan1 master swbridge $ bridge vlan add dev swbridge vid 1 pvid untagged self $ bridge vlan add dev lan1 vid 1 pvid untagged but this order would break: $ ip link add swbridge type bridge vlan_filtering 1 vlan_default_pvid 0 $ ip link set lan1 master swbridge $ bridge vlan add dev lan1 vid 1 pvid untagged $ bridge vlan add dev swbridge vid 1 pvid untagged self Additionally, the vlan on the bridge itself would become undeletable: $ bridge vlan port vlan-id lan1 1 PVID Egress Untagged swbridge 1 PVID Egress Untagged $ bridge vlan del dev swbridge vid 1 self $ bridge vlan port vlan-id lan1 1 PVID Egress Untagged swbridge 1 Egress Untagged since the vlan was never added to DSA's vlan list, so deleting it will cause an error, causing the bridge code to not remove it. Fix this by checking if flags changed only for vlans that are already brentry and pass changed as false for those that become brentries, as these are a new vlan (member) from the switchdev point of view. Since *changed is set to true for becomes_brentry = true regardless of would_change's value, this will not change any rtnetlink notification delivery, just the value passed on to switchdev in vlan->changed. Fixes: 8d23a54f5bee ("net: bridge: switchdev: differentiate new VLANs from changed ones") Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250414200020.192715-1-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-15net: bridge: locally receive all multicast packets if IFF_ALLMULTI is setShengyu Qu
If multicast snooping is enabled, multicast packets may not always end up on the local bridge interface, if the host is not a member of the multicast group. Similar to how IFF_PROMISC allows all packets to be received locally, let IFF_ALLMULTI allow all multicast packets to be received. OpenWrt uses a user space daemon for DHCPv6/RA/NDP handling, and in relay mode it sets the ALLMULTI flag in order to receive all relevant queries on the network. This works for normal network interfaces and non-snooping bridges, but not snooping bridges (unless multicast routing is enabled). Reported-by: Felix Fietkau <nbd@nbd.name> Closes: https://github.com/openwrt/openwrt/issues/15857#issuecomment-2662851243 Signed-off-by: Shengyu Qu <wiagn233@outlook.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/OSZPR01MB8434308370ACAFA90A22980798B32@OSZPR01MB8434.jpnprd01.prod.outlook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-14bridge: Convert br_net_exit_batch_rtnl() to ->exit_rtnl().Kuniyuki Iwashima
br_net_exit_batch_rtnl() iterates the dying netns list and performs the same operation for each. Let's use ->exit_rtnl(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://patch.msgid.link/20250411205258.63164-10-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-14net: bridge: mcast: Notify on mdb offload failureJoseph Huang
Notify user space on mdb offload failure if mdb_offload_fail_notification is enabled. Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250411150323.1117797-4-Joseph.Huang@garmin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-14net: bridge: Add offload_fail_notification boptJoseph Huang
Add BR_BOOLOPT_MDB_OFFLOAD_FAIL_NOTIFICATION bool option. Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250411150323.1117797-3-Joseph.Huang@garmin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-14net: bridge: mcast: Add offload failed mdb flagJoseph Huang
Add MDB_FLAGS_OFFLOAD_FAILED and MDB_PG_FLAGS_OFFLOAD_FAILED to indicate that an attempt to offload the MDB entry to switchdev has failed. Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250411150323.1117797-2-Joseph.Huang@garmin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc2). Conflict: Documentation/networking/netdevices.rst net/core/lock_debug.c 04efcee6ef8d ("net: hold instance lock during NETDEV_CHANGE") 03df156dd3a6 ("xdp: double protect netdev->xdp_flags with netdev->lock") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09net: bridge: Prevent unicast ARP/NS packets from being suppressed by bridgeAmit Cohen
When Proxy ARP or ARP/ND suppression are enabled, ARP/NS packets can be handled by bridge in br_do_proxy_suppress_arp()/br_do_suppress_nd(). For broadcast packets, they are replied by bridge, but later they are not flooded. Currently, unicast packets are replied by bridge when suppression is enabled, and they are also forwarded, which results two replicas of ARP reply/NA - one from the bridge and second from the target. RFC 1122 describes use case for unicat ARP packets - "unicast poll" - actively poll the remote host by periodically sending a point-to-point ARP request to it, and delete the entry if no ARP reply is received from N successive polls. The purpose of ARP/ND suppression is to reduce flooding in the broadcast domain. If a host is sending a unicast ARP/NS, then it means it already knows the address and the switches probably know it as well and there will not be any flooding. In addition, the use case of unicast ARP/NS is to poll a specific host, so it does not make sense to have the switch answer on behalf of the host. According to RFC 9161: "A PE SHOULD reply to broadcast/multicast address resolution messages, i.e., ARP Requests, ARP probes, NS messages, as well as DAD NS messages. An ARP probe is an ARP Request constructed with an all-zero sender IP address that may be used by hosts for IPv4 Address Conflict Detection as specified in [RFC5227]. A PE SHOULD NOT reply to unicast address resolution requests (for instance, NUD NS messages)." Forward such requests and prevent the bridge from replying to them. Reported-by: Denis Yulevych <denisyu@nvidia.com> Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/6bf745a149ddfe5e6be8da684a63aa574a326f8d.1744123493.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Merge in late fixes to prepare for the 6.15 net-next PR. No conflicts, adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt.c 919f9f497dbc ("eth: bnxt: fix out-of-range access of vnic_info array") fe96d717d38e ("bnxt_en: Extend queue stop/start for TX rings") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-21net: Remove RTNL dance for SIOCBRADDIF and SIOCBRDELIF.Kuniyuki Iwashima
SIOCBRDELIF is passed to dev_ioctl() first and later forwarded to br_ioctl_call(), which causes unnecessary RTNL dance and the splat below [0] under RTNL pressure. Let's say Thread A is trying to detach a device from a bridge and Thread B is trying to remove the bridge. In dev_ioctl(), Thread A bumps the bridge device's refcnt by netdev_hold() and releases RTNL because the following br_ioctl_call() also re-acquires RTNL. In the race window, Thread B could acquire RTNL and try to remove the bridge device. Then, rtnl_unlock() by Thread B will release RTNL and wait for netdev_put() by Thread A. Thread A, however, must hold RTNL after the unlock in dev_ifsioc(), which may take long under RTNL pressure, resulting in the splat by Thread B. Thread A (SIOCBRDELIF) Thread B (SIOCBRDELBR) ---------------------- ---------------------- sock_ioctl sock_ioctl `- sock_do_ioctl `- br_ioctl_call `- dev_ioctl `- br_ioctl_stub |- rtnl_lock | |- dev_ifsioc ' ' |- dev = __dev_get_by_name(...) |- netdev_hold(dev, ...) . / |- rtnl_unlock ------. | | |- br_ioctl_call `---> |- rtnl_lock Race | | `- br_ioctl_stub |- br_del_bridge Window | | | |- dev = __dev_get_by_name(...) | | | May take long | `- br_dev_delete(dev, ...) | | | under RTNL pressure | `- unregister_netdevice_queue(dev, ...) | | | | `- rtnl_unlock \ | |- rtnl_lock <-' `- netdev_run_todo | |- ... `- netdev_run_todo | `- rtnl_unlock |- __rtnl_unlock | |- netdev_wait_allrefs_any |- netdev_put(dev, ...) <----------------' Wait refcnt decrement and log splat below To avoid blocking SIOCBRDELBR unnecessarily, let's not call dev_ioctl() for SIOCBRADDIF and SIOCBRDELIF. In the dev_ioctl() path, we do the following: 1. Copy struct ifreq by get_user_ifreq in sock_do_ioctl() 2. Check CAP_NET_ADMIN in dev_ioctl() 3. Call dev_load() in dev_ioctl() 4. Fetch the master dev from ifr.ifr_name in dev_ifsioc() 3. can be done by request_module() in br_ioctl_call(), so we move 1., 2., and 4. to br_ioctl_stub(). Note that 2. is also checked later in add_del_if(), but it's better performed before RTNL. SIOCBRADDIF and SIOCBRDELIF have been processed in dev_ioctl() since the pre-git era, and there seems to be no specific reason to process them there. [0]: unregister_netdevice: waiting for wpan3 to become free. Usage count = 2 ref_tracker: wpan3@ffff8880662d8608 has 1/1 users at __netdev_tracker_alloc include/linux/netdevice.h:4282 [inline] netdev_hold include/linux/netdevice.h:4311 [inline] dev_ifsioc+0xc6a/0x1160 net/core/dev_ioctl.c:624 dev_ioctl+0x255/0x10c0 net/core/dev_ioctl.c:826 sock_do_ioctl+0x1ca/0x260 net/socket.c:1213 sock_ioctl+0x23a/0x6c0 net/socket.c:1318 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x1a4/0x210 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcb/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 893b19587534 ("net: bridge: fix ioctl locking") Reported-by: syzkaller <syzkaller@googlegroups.com> Reported-by: yan kang <kangyan91@outlook.com> Reported-by: yue sun <samsun1006219@gmail.com> Closes: https://lore.kernel.org/netdev/SY8P300MB0421225D54EB92762AE8F0F2A1D32@SY8P300MB0421.AUSP300.PROD.OUTLOOK.COM/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250316192851.19781-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-08net: move misc netdev_lock flavors to a separate headerJakub Kicinski
Move the more esoteric helpers for netdev instance lock to a dedicated header. This avoids growing netdevice.h to infinity and makes rebuilding the kernel much faster (after touching the header with the helpers). The main netdev_lock() / netdev_unlock() functions are used in static inlines in netdevice.h and will probably be used most commonly, so keep them in netdevice.h. Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250307183006.2312761-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-04net: rename netns_local to netns_immutableNicolas Dichtel
The name 'netns_local' is confusing. A following commit will export it via netlink, so let's use a more explicit name. Reported-by: Eric Dumazet <edumazet@google.com> Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-21rtnetlink: Pack newlink() params into structXiao Liang
There are 4 net namespaces involved when creating links: - source netns - where the netlink socket resides, - target netns - where to put the device being created, - link netns - netns associated with the device (backend), - peer netns - netns of peer device. Currently, two nets are passed to newlink() callback - "src_net" parameter and "dev_net" (implicitly in net_device). They are set as follows, depending on netlink attributes in the request. +------------+-------------------+---------+---------+ | peer netns | IFLA_LINK_NETNSID | src_net | dev_net | +------------+-------------------+---------+---------+ | | absent | source | target | | absent +-------------------+---------+---------+ | | present | link | link | +------------+-------------------+---------+---------+ | | absent | peer | target | | present +-------------------+---------+---------+ | | present | peer | link | +------------+-------------------+---------+---------+ When IFLA_LINK_NETNSID is present, the device is created in link netns first and then moved to target netns. This has some side effects, including extra ifindex allocation, ifname validation and link events. These could be avoided if we create it in target netns from the beginning. On the other hand, the meaning of src_net parameter is ambiguous. It varies depending on how parameters are passed. It is the effective link (or peer netns) by design, but some drivers ignore it and use dev_net instead. To provide more netns context for drivers, this patch packs existing newlink() parameters, along with the source netns, link netns and peer netns, into a struct. The old "src_net" is renamed to "net" to avoid confusion with real source netns, and will be deprecated later. The use of src_net are converted to params->net trivially. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-3-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-05bridge: mdb: Allow replace of a host-joined groupPetr Machata
Attempts to replace an MDB group membership of the host itself are currently bounced: # ip link add name br up type bridge vlan_filtering 1 # bridge mdb replace dev br port br grp 239.0.0.1 vid 2 # bridge mdb replace dev br port br grp 239.0.0.1 vid 2 Error: bridge: Group is already joined by host. A similar operation done on a member port would succeed. Ignore the check for replacement of host group memberships as well. The bit of code that this enables is br_multicast_host_join(), which, for already-joined groups only refreshes the MC group expiration timer, which is desirable; and a userspace notification, also desirable. Change a selftest that exercises this code path from expecting a rejection to expecting a pass. The rest of MDB selftests pass without modification. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/e5c5188b9787ae806609e7ca3aa2a0a501b9b5c4.1738685648.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-19netfilter: br_netfilter: remove unused conditional and dead codeAntoine Tenart
The SKB_DROP_REASON_IP_INADDRERRORS drop reason is never returned from any function, as such it cannot be returned from the ip_route_input call tree. The 'reason != SKB_DROP_REASON_IP_INADDRERRORS' conditional is thus always true. Looking back at history, commit 50038bf38e65 ("net: ip: make ip_route_input() return drop reasons") changed the ip_route_input returned value check in br_nf_pre_routing_finish from -EHOSTUNREACH to SKB_DROP_REASON_IP_INADDRERRORS. It turns out -EHOSTUNREACH could not be returned either from the ip_route_input call tree and this since commit 251da4130115 ("ipv4: Cache ip_error() routes even when not forwarding."). Not a fix as this won't change the behavior. While at it use kfree_skb_reason. Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2025-01-07bridge: Make br_is_nd_neigh_msg() accept pointer to "const struct sk_buff"Ted Chen
The skb_buff struct in br_is_nd_neigh_msg() is never modified. Mark it as const. Signed-off-by: Ted Chen <znscnchen@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250104083846.71612-1-znscnchen@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-23net: bridge: add skb drop reasons to the most common drop pointsRadu Rendec
The bridge input code may drop frames for various reasons and at various points in the ingress handling logic. Currently kfree_skb() is used everywhere, and therefore no drop reason is specified. Add drop reasons to the most common drop points. Drop reasons are not added exhaustively to the entire bridge code. The intention is to incrementally add drop reasons to the rest of the bridge code in follow up patches. Signed-off-by: Radu Rendec <rrendec@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20241219163606.717758-3-rrendec@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-20net: bridge: Handle changes in VLAN_FLAG_BRIDGE_BINDINGPetr Machata
When bridge binding is enabled on a VLAN netdevice, its link state should track bridge ports that are members of the corresponding VLAN. This works for newly-added netdevices. However toggling the option does not have the effect of enabling or disabling the behavior as appropriate. In this patch, react to bridge_binding toggles on VLAN uppers. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/90a8ca8aea4d81378b29d75d9e562433e0d5c7ff.1734540770.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-20net: bridge: Extract a helper to handle bridge_binding togglesPetr Machata
Currently, the BROPT_VLAN_BRIDGE_BINDING bridge option is only toggled when VLAN devices are added on top of a bridge or removed from it. Extract the toggling of the option to a function so that it could be invoked by a subsequent patch when the state of an upper VLAN device changes. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/a7455f6fe1dfa7b13126ed8a7fb33d3b611eecb8.1734540770.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-17net: bridge: constify 'struct bin_attribute'Thomas Weißschuh
The sysfs core now allows instances of 'struct bin_attribute' to be moved into read-only memory. Make use of that to protect them against accidental or malicious modifications. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20241216-sysfs-const-bin_attr-net-v1-1-ec460b91f274@weissschuh.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10rtnetlink: add ndo_fdb_dump_contextEric Dumazet
rtnl_fdb_dump() and various ndo_fdb_dump() helpers share a hidden layout of cb->ctx. Before switching rtnl_fdb_dump() to for_each_netdev_dump() in the following patch, make this more explicit. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20241209100747.2269613-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15ndo_fdb_del: Add a parameter to report whether notification was sentPetr Machata
In a similar fashion to ndo_fdb_add, which was covered in the previous patch, add the bool *notified argument to ndo_fdb_del. Callees that send a notification on their own set the flag to true. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/06b1acf4953ef0a5ed153ef1f32d7292044f2be6.1731589511.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15ndo_fdb_add: Add a parameter to report whether notification was sentPetr Machata
Currently when FDB entries are added to or deleted from a VXLAN netdevice, the VXLAN driver emits one notification, including the VXLAN-specific attributes. The core however always sends a notification as well, a generic one. Thus two notifications are unnecessarily sent for these operations. A similar situation comes up with bridge driver, which also emits notifications on its own: # ip link add name vx type vxlan id 1000 dstport 4789 # bridge monitor fdb & [1] 1981693 # bridge fdb add de:ad:be:ef:13:37 dev vx self dst 192.0.2.1 de:ad:be:ef:13:37 dev vx dst 192.0.2.1 self permanent de:ad:be:ef:13:37 dev vx self permanent In order to prevent this duplicity, add a paremeter to ndo_fdb_add, bool *notified. The flag is primed to false, and if the callee sends a notification on its own, it sets it to true, thus informing the core that it should not generate another notification. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/cbf6ae8195e85cbf922f8058ce4eba770f3b71ed.1731589511.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-12net: ip: make ip_route_input() return drop reasonsMenglong Dong
In this commit, we make ip_route_input() return skb drop reasons that come from ip_route_input_noref(). Meanwhile, adjust all the call to it. Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-09bridge: Allow deleting FDB entries with non-existent VLANIdo Schimmel
It is currently impossible to delete individual FDB entries (as opposed to flushing) that were added with a VLAN that no longer exists: # ip link add name dummy1 up type dummy # ip link add name br1 up type bridge vlan_filtering 1 # ip link set dev dummy1 master br1 # bridge fdb add 00:11:22:33:44:55 dev dummy1 master static vlan 1 # bridge vlan del vid 1 dev dummy1 # bridge fdb get 00:11:22:33:44:55 br br1 vlan 1 00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static # bridge fdb del 00:11:22:33:44:55 dev dummy1 master vlan 1 RTNETLINK answers: Invalid argument # bridge fdb get 00:11:22:33:44:55 br br1 vlan 1 00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static This is in contrast to MDB entries that can be deleted after the VLAN was deleted: # bridge vlan add vid 10 dev dummy1 # bridge mdb add dev br1 port dummy1 grp 239.1.1.1 permanent vid 10 # bridge vlan del vid 10 dev dummy1 # bridge mdb get dev br1 grp 239.1.1.1 vid 10 dev br1 port dummy1 grp 239.1.1.1 permanent vid 10 # bridge mdb del dev br1 port dummy1 grp 239.1.1.1 permanent vid 10 # bridge mdb get dev br1 grp 239.1.1.1 vid 10 Error: bridge: MDB entry not found. Align the two interfaces and allow user space to delete FDB entries that were added with a VLAN that no longer exists: # ip link add name dummy1 up type dummy # ip link add name br1 up type bridge vlan_filtering 1 # ip link set dev dummy1 master br1 # bridge fdb add 00:11:22:33:44:55 dev dummy1 master static vlan 1 # bridge vlan del vid 1 dev dummy1 # bridge fdb get 00:11:22:33:44:55 br br1 vlan 1 00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static # bridge fdb del 00:11:22:33:44:55 dev dummy1 master vlan 1 # bridge fdb get 00:11:22:33:44:55 br br1 vlan 1 Error: Fdb entry not found. Add a selftest to make sure this behavior does not regress: # ./rtnetlink.sh -t kci_test_fdb_del PASS: bridge fdb del Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Andy Roulin <aroulin@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20241105133954.350479-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-07ipv4: Prepare ip_route_output() to future .flowi4_tos conversion.Guillaume Nault
Convert the "tos" parameter of ip_route_output() to dscp_t. This way we'll have a dscp_t value directly available when .flowi4_tos will eventually be converted to dscp_t. All ip_route_output() callers but one set this "tos" parameter to 0 and therefore don't need to be adapted to the new prototype. Only br_nf_pre_routing_finish() needs conversion. It can just use ip4h_dscp() to get the DSCP field from the IPv4 header. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/0f10d031dd44c70aae9bc6e19391cb30d5c2fe71.1730928699.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-07Merge tag 'nf-next-24-11-07' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following series contains Netfilter updates for net-next: 1) Make legacy xtables configs user selectable, from Breno Leitao. 2) Fix a few sparse warnings related to percpu, from Uros Bizjak. 3) Use strscpy_pad, from Justin Stitt. 4) Use nft_trans_elem_alloc() in catchall flush, from Florian Westphal. 5) A series of 7 patches to fix false positive with CONFIG_RCU_LIST=y. Florian also sees possible issue with 10 while module load/removal when requesting an expression that is available via module. As for patch 11, object is being updated so reference on the module already exists so I don't see any real issue. Florian says: "Unfortunately there are many more errors, and not all are false positives. First patches pass lockdep_commit_lock_is_held() to the rcu list traversal macro so that those splats are avoided. The last two patches are real code change as opposed to 'pass the transaction mutex to relax rcu check': Those two lists are not protected by transaction mutex so could be altered in parallel. This targets nf-next because these are long-standing issues." netfilter pull request 24-11-07 * tag 'nf-next-24-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: must hold rcu read lock while iterating object type list netfilter: nf_tables: must hold rcu read lock while iterating expression type list netfilter: nf_tables: avoid false-positive lockdep splats with basechain hook netfilter: nf_tables: avoid false-positive lockdep splats in set walker netfilter: nf_tables: avoid false-positive lockdep splats with flowtables netfilter: nf_tables: avoid false-positive lockdep splats with sets netfilter: nf_tables: avoid false-positive lockdep splat on rule deletion netfilter: nf_tables: prefer nft_trans_elem_alloc helper netfilter: nf_tables: replace deprecated strncpy with strscpy_pad netfilter: nf_tables: Fix percpu address space issues in nf_tables_api.c netfilter: Make legacy configs user selectable ==================== Link: https://patch.msgid.link/20241106234625.168468-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-23netpoll: remove ndo_netpoll_setup() second argumentEric Dumazet
npinfo is not used in any of the ndo_netpoll_setup() methods. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241018052108.2610827-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-22rtnetlink: Return int from rtnl_af_register().Kuniyuki Iwashima
The next patch will add init_srcu_struct() in rtnl_af_register(), then we need to handle its error. Let's add the error handling in advance to make the following patch cleaner. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Matt Johnston <matt@codeconstruct.com.au> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-15net: bridge: replace call_rcu by kfree_rcu for simple kmem_cache_free callbackJulia Lawall
Since SLOB was removed and since commit 6c6c47b063b5 ("mm, slab: call kvfree_rcu_barrier() from kmem_cache_destroy()"), it is not necessary to use call_rcu when the callback only performs kmem_cache_free. Use kfree_rcu() directly. The changes were made using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Link: https://patch.msgid.link/20241013201704.49576-9-Julia.Lawall@inria.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-08-02 20:42:09 +0000