| Age | Commit message (Collapse) | Author |
|---|
|
Current Kconfig menu at [ALSA for SoC audio support] has no rules.
So, some venders are using menu style, some venders are listed each drivers
on top page, etc. It is difficult to find target vender and/or drivers
because it is very random.
Let's standardize ASoC menu
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/87a56dzqd4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
clk_prepare_enable/clk_disable_unprepare
clk_prepare_enable() and clk_disable_unprepare() already checked
NULL clock parameter.Remove unneeded NULL check for clk here.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20250325092640.996802-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the newer RUNTIME_PM_OPS() instead of SET_RUNTIME_PM_OPS()
together with pm_ptr().
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250317095603.20073-82-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Adding jack detection requires sound servers to act on the emitted
events, which are described by ALSA Use Case Manager configurations in
userspace. These configurations include the long card name in the file
path (falling back to card->name if this is not present), so add a long
card name for the H616 without spaces, making UCM referencing easier.
The corresponding ALSA UCM patch is here (now merged):
https://github.com/alsa-project/alsa-ucm-conf/pull/491
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
--
Changelog v1..v2:
- Separate patch for card->long_name
- Note UCM patch link
Changelog v2..v3:
- Add card->long_name rather than change existing card->name
Link: https://patch.msgid.link/20250214220247.10810-6-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for GPIO headphone detection with the hp-det-gpios
property. In order for this to properly disable the path upon
removal of headphones, the output must be labelled Headphone which
is a common sink in the driver.
Describe a headphone jack and detection GPIO in the driver, check for
a corresponding device tree node, and enable jack detection in a new
machine init function if described.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
--
Changelog v1..v2:
- Separate DAPM changes into separate patch and add rationale.
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://patch.msgid.link/20250214220247.10810-4-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The previous H616 support patch added a single LINEOUT DAPM pin switch
to the card controls. As the codec in this SoC only has a single route,
this seemed reasonable at the time, however is redundant given the
existing DAPM codec widget definitions controlling the digital and
analog sides of the codec.
It is also insufficient to describe the scenario where separate
components (muxes, jack detection etc) are used to modify the audio
route external to the SoC. For example the Anbernic RG(##)XX series of
devices uses a headphone jack detection switch, GPIO-controlled speaker
amplifier and a passive external mux chip to route audio.
Remove the redundant LINEOUT card control, and add a Speaker pin switch
control and Headphone DAPM widget to allow control of the above
hardware.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://patch.msgid.link/20250214220247.10810-3-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Clean up error handling by using the new devm_
clock and reset functions. This should make it
easier to add new code, as we can eliminate the
"goto ladder" in probe().
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Link: https://patch.msgid.link/20250114095909.798559-1-csokas.bence@prolan.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
24 bit audio file can be detected by the alsa driver as S32_LE.
Add this format to what is supported and change the DMA address
width.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Link: https://patch.msgid.link/20241111165600.57219-4-codekipper@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This doesn't affect 16bit formats and allows us to properly run
24bit formats.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Link: https://patch.msgid.link/20241111165600.57219-3-codekipper@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There have been intermittent issues with the SPDIF output on H3
and H2+ devices which has been fixed by setting the s_clk to 4
times the audio pll.
Add a quirk for the clock multiplier as not every supported SoC
requires it. Without the multiplier, the audio at normal sampling
rates was distorted and did not play at higher sampling rates.
Fixes: 1bd92af877ab ("ASoC: sun4i-spdif: Add support for the H3 SoC")
Signed-off-by: George Lander <lander@jagmn.com>
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Link: https://patch.msgid.link/20241111165600.57219-2-codekipper@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Allwinner suniv F1C100s has similar but primitive audio codec
comparared to sun4i. Add support for it.
Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
[ csokas.bence: Remove `non_legacy_dai_naming`, add `reg_dac_fifoc` ]
Signed-off-by: Csókás Bence <csokas.bence@prolan.hu>
Link: https://github.com/mricon/b4/issues/50
Link: https://patch.msgid.link/20241123123900.2656837-4-csokas.bence@prolan.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Allwinner suniv F1C100s has similar DMA engine to sun4i but it has
smaller max burst size compared to sun4i. Add a quirk field to
differantitate between them.
Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
[ csokas.bence: Rebased on current master ]
Signed-off-by: Csókás Bence <csokas.bence@prolan.hu>
Link: https://patch.msgid.link/20241123123900.2656837-2-csokas.bence@prolan.hu
Link: https://github.com/mricon/b4/issues/50
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The H616 SoC codec is playback-only with a single line-out route, and
has some register differences from prior codecs.
Add the required compatible string, registers, quirks, DAPM widgets,
codec controls and routes, based on existing devices and the H616
datasheet.
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Link: https://patch.msgid.link/20241023075917.186835-6-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some devices only have the playback side of the codec implemented
so add a quirk to check for this. This flag is only required internally
within the codec driver, as the DAI is configured for playback only
(capture disabled) separately in the create_card() function for these
devices.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://patch.msgid.link/20241023075917.186835-5-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Allwinner H616 SoC uses a different register address to control the
output FIFO.
Allow this to be specified separately from the ADC FIFO control
register.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://patch.msgid.link/20241023075917.186835-4-ryan@testtoast.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.12
This is a very large set of changes, almost all in drivers rather than
the core. Even with the addition of several quite large drivers the
overall diffstat is negative thanks to the removal of some old Intel
board support which has been obsoleted by the AVS driver, helped a bit
by some factoring out into helpers (especially around the Soundwire
machine drivers for x86).
Highlights include:
- More simplifications and cleanups throughout the subsystem from
Morimoto-san.
- Extensive cleanups and refactoring of the Soundwire drivers to make
better use of helpers.
- Removal of Intel machine support obsoleted by the AVS driver.
- Lots of DT schema conversions.
- Machine support for many AMD and Intel x86 platforms.
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek RTL1320
SoundWire and rev C, and Texas Instruments TAS2563
|
|
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all drivers below sound/soc to use .remove(), with the eventual
goal to drop struct platform_driver::remove_new(). As .remove() and
.remove_new() have the same prototypes, conversion is done by just
changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240909151230.909818-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The custom rate constraint lists was necessary to support 12kHz and 24kHz.
These rates are now available through SNDRV_PCM_RATE_12000 and
SNDRV_PCM_RATE_24000.
Use them and drop the custom rate constraint rule.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: David Rhodes <drhodes@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240905-alsa-12-24-128-v1-11-8371948d3921@baylibre.com
|
|
This fixes the LRCLK polarity for sun8i-h3 and sun50i-h6 in i2s mode
which was wrongly inverted.
The LRCLK was being set in reversed logic compared to the DAI format:
inverted LRCLK for SND_SOC_DAIFMT_IB_NF and SND_SOC_DAIFMT_NB_NF; normal
LRCLK for SND_SOC_DAIFMT_IB_IF and SND_SOC_DAIFMT_NB_IF. Such reversed
logic applies properly for DSP_A, DSP_B, LEFT_J and RIGHT_J modes but
not for I2S mode, for which the LRCLK signal results reversed to what
expected on the bus. The issue is due to a misinterpretation of the
LRCLK polarity bit of the H3 and H6 i2s controllers. Such bit in this
case does not mean "0 => normal" or "1 => inverted" according to the
expected bus operation, but it means "0 => frame starts on low edge" and
"1 => frame starts on high edge" (from the User Manuals).
This commit fixes the LRCLK polarity by setting the LRCLK polarity bit
according to the selected bus mode and renames the LRCLK polarity bit
definition to avoid further confusion.
Fixes: dd657eae8164 ("ASoC: sun4i-i2s: Fix the LRCK polarity")
Fixes: 73adf87b7a58 ("ASoC: sun4i-i2s: Add support for H6 I2S")
Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com>
Link: https://patch.msgid.link/20240801-asoc-fix-sun4i-i2s-v2-1-a8e4e9daa363@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Do not open-code snd_soc_substream_to_rtd().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240430-asoc-snd-substream-clean-v1-13-6f8a8902b479@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The AllWinner H6 and later SoCs that sport a DMIC block contain a set of registers to control
the gain (left + right) of each of the four supported channels.
Add ASoC controls for changing each of the stereo channel gains using alsamixer and alike
Signed-off-by: Joao Schim <joao@schimsalabim.eu>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240429194920.1596257-1-joao@schimsalabim.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
pcm_formats should be a u64 as it is a SNDRV_PCM_FMTBIT_* not a
SNDRV_PCM_FORMAT_*.
Also fix a small grammar error while we're here.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404170103.ySYwieqi-lkp@intel.com/
Signed-off-by: John Watts <contact@jookia.org>
Link: https://lore.kernel.org/r/20240417-sunxi_s32_fix-v1-1-d82e451565c0@jookia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The I2S cores used in the H3 onwards support 32-bit sample rates.
Support these by adding a per-variant PCM format list.
Signed-off-by: John Watts <contact@jookia.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240403-sunxi_s32-v2-1-29ebf6ad590a@jookia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When CONFIG_SND_JACK_INPUT_DEV is disabled, struct snd_jack doesn't
have 'type' field. We can't rely on this field being always present,
so store the jack_type in the codec driver itself.
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403261243.kcXCPAYs-lkp@intel.com/
Link: https://msgid.link/r/20240327080542.3649840-1-megi@xff.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for the jack detection functionality in the A64 variant,
which uses a pair of IRQs; and microphone accessory (button) detection,
which uses an ADC with an IRQ trigger.
IRQs will only be triggered if the JACKDETEN, HMICBIASEN, and MICADCEN
bits are set appropriately in the analog codec component
(sun50i-codec-analog), but there is no direct software dependency
between the two components.
Setup ADC so that it samples with period of 16ms, disable smoothing
and enable MDATA threshold (should be below idle voltage/HMIC_DATA
value). Also enable HMIC_N, which makes sure we get HMIC_N samples
after HMIC_DATA crosses the threshold.
This allows us to perform steady state detection of HMIC_DATA, by
comparing current and previous ADC samples, to detect end of the
transient when the user de-presses the button. Otherwise ADC could
sample anywhere within the transient, and the driver may mis-issue
key-press events for other buttons attached to the resistor ladder.
[Ondrej: Almost complete rewrite of the patch, change to use set_jack
API. Better de-bounce, fix mic button handling, better interrupt
processing.]
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
[Samuel: Decouple from analog codec, fixes]
Co-developed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Co-developed-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Link: https://msgid.link/r/20240302140042.1990256-5-megi@xff.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This commit adds the necessary setup to enable jack detection on startup
as well as the callback function enabling the microphone ADC when
headset bias is enabled. The microphone ADC is also disabled in suspend.
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
[Samuel: Moved MICADCEN setup to HBIAS event, added bias hooks]
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Ondřej Jirman <megi@xff.cz>
Link: https://msgid.link/r/20240302140042.1990256-4-megi@xff.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For codec variants that have a bus clock, that clock must be running to
receive interrupts. Since jack and mic accessory detection should work
even when no audio is playing, that means the bus clock should be
enabled any time the system is on.
Accomplish that by tying the bus clock to the runtime PM state, which is
then tied to the bias level not being OFF. Since the codec sets
idle_bias_on, bias will generally never be OFF. However, we can set
suspend_bias_off to maintain the power savings of gating the bus clock
during suspend, when we don't expect jack/accessory detection to work.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Ondřej Jirman <megi@xff.cz>
Link: https://msgid.link/r/20240302140042.1990256-3-megi@xff.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With idle_bias_on and suspend_bias_off, there are bias level transitions
that match the suspend/resume callbacks. However, there are also
transitions during probe (OFF => STANDBY) and removal (STANDBY => OFF).
By using the set_bias_level hook, the driver can have one copy of code
that would otherwise be duplicated between the probe/resume and
suspend/remove hooks.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Ondřej Jirman <megi@xff.cz>
Link: https://msgid.link/r/20240302140042.1990256-2-megi@xff.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SPDIF hardware block found in the H616 SoC has the same layout as
the one found in the H6 SoC, except that it is missing the receiver
side.
Since the driver currently only supports the transmit function, support
for the H616 is identical to what is currently done for the H6.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://msgid.link/r/20240127163247.384439-4-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> # for at91
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006-dt-asoc-header-cleanups-v3-1-13a4f0f7fee6@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o7i8qnie.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ALSA SoC merges DAI call backs into .ops.
This patch merge these into one.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/875y5pb0sr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver depends on CONFIG_OF, it is not necessary to use
of_match_ptr() here.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com
Link: https://lore.kernel.org/r/20230811071426.2343133-4-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-145-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Ban Tao <fengzheng923@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-144-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-143-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-142-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230315150745.67084-141-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Acked-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/202211111641514826535@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In configurations with CONFIG_OF=n, we get a harmless build warning:
sound/soc/sunxi/sun50i-dmic.c:268:34: warning: unused variable
'sun50i_dmic_of_match' [-Wunused-const-variable]
Signed-off-by: Ban Tao <fengzheng923@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/1666511085-2748-1-git-send-email-fengzheng923@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Just fix compile error without any logic changes.
sound/soc/sunxi/sun50i-dmic.c:62:1: error: ‘static’ is not at beginning of declaration [-Werror=old-style-declaration]
62 | const static struct dmic_rate dmic_rate_s[] = {
| ^~~~~
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Link: https://lore.kernel.org/r/20220921033819.2188233-1-zengheng4@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
At present, succesfull probing of H3 Codec results in an error
debugfs: Directory '1c22c00.codec' with parent 'H3 Audio Codec' already present!
This is caused by a directory name conflict between codec
components. Fix it by setting debugfs_prefix for the CPU DAI
component.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Link: https://lore.kernel.org/r/20220913212256.151799-2-mike.rudenko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Allwinner H6 and later SoCs have an DMIC block
which is capable of capture.
Signed-off-by: Ban Tao <fengzheng923@gmail.com>
Tested-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/1662965133-9232-1-git-send-email-fengzheng923@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In the case when a codec device is probed before codec analog
controls, snd_soc_register_card() returns -EPROBE_DEFER, resulting in
a misleading error message
sun4i-codec 1c22c00.codec: Failed to register our card
even if the device is probed successfully later. Use dev_err_probe()
to demote the above error to a debug message.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220911145713.55199-1-mike.rudenko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Historically, the legacy DAI naming scheme was applied to platform
drivers and the newer scheme to CODEC drivers. During componentisation
the core lost the knowledge of if a driver was a CODEC or platform, they
were all now components. To continue to support the legacy naming on
older platform drivers a flag was added to the snd_soc_component_driver
structure, non_legacy_dai_naming, to indicate to use the new scheme and
this was applied to all CODECs as part of the migration.
However, a slight issue appears to be developing with respect to this
flag being opt in for the non-legacy scheme, which presumably we want to
be the primary scheme used. Many codec drivers appear to forget to
include this flag:
grep -l -r "snd_soc_component_driver" sound/soc/codecs/*.c |
xargs grep -L "non_legacy_dai_naming" | wc
48 48 556
Whilst in many cases the configuration of the DAIs themselves will cause
the core to apply the new scheme anyway, it would seem more sensible to
change the flag to legacy_dai_naming making the new scheme opt out. This
patch series migrates across to such a scheme.
|
|
In order to properly bias headset microphones, there should be a pull-up
resistor between pins HBIAS and MIC2P. This can be an external resistor,
but the codec also provides an internal 2.2K resistor which is enabled
by a register.
This patch enables or disables the internal bias resistor based on a
device tree property.
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
[Samuel: split binding and implementation; move to device probe]
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220621035452.60272-3-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-42-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Change the legacy DAI naming flag from opting in to the new scheme
(non_legacy_dai_naming), to opting out of it (legacy_dai_naming).
These drivers appear to be on the CPU side of the DAI link and
currently uses the legacy naming, so add the new flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-15-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove warnings
sound/soc/sunxi/sun4i-i2s.c:205: warning: Function parameter or member
'num_din_pins' not described in 'sun4i_i2s_quirks'
sound/soc/sunxi/sun4i-i2s.c:205: warning: Function parameter or member
'num_dout_pins' not described in 'sun4i_i2s_quirks'
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220616220802.136282-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
