| Age | Commit message (Collapse) | Author |
|---|
|
In order to support rebalancing and spanning stores using less than the
worst case number of nodes, we need to track more than just the vacant
height. Using only vacant height to reduce the worst case maple node
allocation count can lead to a shortcoming of nodes in the following
scenarios.
For rebalancing writes, when a leaf node becomes insufficient, it may be
combined with a sibling into a single node. This means that the parent
node which has entries for this children will lose one entry. If this
parent node was just meeting the minimum entries, losing one entry will
now cause this parent node to be insufficient. This leads to a cascading
operation of rebalancing at different levels and can lead to more node
allocations than simply using vacant height can return.
For spanning writes, a similar situation occurs. At the location at which
a spanning write is detected, the number of ancestor nodes may similarly
need to rebalanced into a smaller number of nodes and the same cascading
situation could occur.
To use less than the full height of the tree for the number of
allocations, we also need to track the height at which a non-leaf node
cannot become insufficient. This means even if a rebalance occurs to a
child of this node, it currently has enough entries that it can lose one
without any further action. This field is stored in the maple write state
as sufficient height. In mas_prealloc_calc() when figuring out how many
nodes to allocate, we check if the vacant node is lower in the tree than a
sufficient node (has a larger value). If it is, we cannot use the vacant
height and must use the difference in the height and sufficient height as
the basis for the number of nodes needed.
An off by one bug was also discovered in mast_overflow() where it is using
>= rather than >. This caused extra iterations of the
mas_spanning_rebalance() loop and lead to unneeded allocations. A test is
also added to check the number of allocations is correct.
Link: https://lkml.kernel.org/r/20250410191446.2474640-6-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In order to determine the store type for a maple tree operation, a walk of
the tree is done through mas_wr_walk(). This function descends the tree
until a spanning write is detected or we reach a leaf node. While
descending, keep track of the height at which we encounter a node with
available space. This is done by checking if mas->end is less than the
number of slots a given node type can fit.
Now that the height of the vacant node is tracked, we can use the
difference between the height of the tree and the height of the vacant
node to know how many levels we will have to propagate creating new nodes.
Update mas_prealloc_calc() to consider the vacant height and reduce the
number of worst-case allocations.
Rebalancing and spanning stores are not supported and fall back to using
the full height of the tree for allocations.
Update preallocation testing assertions to take into account vacant
height.
Link: https://lkml.kernel.org/r/20250410191446.2474640-4-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For the maple tree, the root node is defined to have a depth of 0 with a
height of 1. Each level down from the node, these values are incremented
by 1. Various code paths define a root with depth 1 which is inconsisent
with the definition. Modify the code to be consistent with this
definition.
In mas_spanning_rebalance(), l_mas.depth was being used to track the
height based on the number of iterations done in the main loop. This
information was then used in mas_put_in_tree() to set the height. Rather
than overload the l_mas.depth field to track height, simply keep track of
height in the local variable new_height and directly pass this to
mas_wmb_replace() which will be passed into mas_put_in_tree(). This
allows up to remove writes to l_mas.depth.
Link: https://lkml.kernel.org/r/20250410191446.2474640-3-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Buddy allocator like (or non-uniform) folio split", v10.
This patchset adds a new buddy allocator like (or non-uniform) large folio
split from a order-n folio to order-m with m < n. It reduces
1. the total number of after-split folios from 2^(n-m) to n-m+1;
2. the amount of memory needed for multi-index xarray split from 2^(n/6-m/6) to
n/6-m/6, assuming XA_CHUNK_SHIFT=6;
3. keep more large folios after a split from all order-m folios to
order-(n-1) to order-m folios.
For example, to split an order-9 to order-0, folio split generates 10 (or
11 for anonymous memory) folios instead of 512, allocates 1 xa_node
instead of 8, and leaves 1 order-8, 1 order-7, ..., 1 order-1 and 2
order-0 folios (or 4 order-0 for anonymous memory) instead of 512 order-0
folios.
Instead of duplicating existing split_huge_page*() code, __folio_split()
is introduced as the shared backend code for both
split_huge_page_to_list_to_order() and folio_split(). __folio_split() can
support both uniform split and buddy allocator like (or non-uniform)
split. All existing split_huge_page*() users can be gradually converted
to use folio_split() if possible. In this patchset, I converted
truncate_inode_partial_folio() to use folio_split().
xfstests quick group passed for both tmpfs and xfs. I also
semi-replicated Hugh's test[12] and ran it without any issue for almost 24
hours.
This patch (of 8):
A preparation patch for non-uniform folio split, which always split a
folio into half iteratively, and minimal xarray entry split.
Currently, xas_split_alloc() and xas_split() always split all slots from a
multi-index entry. They cost the same number of xa_node as the
to-be-split slots. For example, to split an order-9 entry, which takes
2^(9-6)=8 slots, assuming XA_CHUNK_SHIFT is 6 (!CONFIG_BASE_SMALL), 8
xa_node are needed. Instead xas_try_split() is intended to be used
iteratively to split the order-9 entry into 2 order-8 entries, then split
one order-8 entry, based on the given index, to 2 order-7 entries, ...,
and split one order-1 entry to 2 order-0 entries. When splitting the
order-6 entry and a new xa_node is needed, xas_try_split() will try to
allocate one if possible. As a result, xas_try_split() would only need 1
xa_node instead of 8.
When a new xa_node is needed during the split, xas_try_split() can try to
allocate one but no more. -ENOMEM will be return if a node cannot be
allocated. -EINVAL will be return if a sibling node is split or cascade
split happens, where two or more new nodes are needed, and these are not
supported by xas_try_split().
xas_split_alloc() and xas_split() split an order-9 to order-0:
---------------------------------
| | | | | | | | |
| 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| | | | | | | | |
---------------------------------
| | | |
------- --- --- -------
| | ... | |
V V V V
----------- ----------- ----------- -----------
| xa_node | | xa_node | ... | xa_node | | xa_node |
----------- ----------- ----------- -----------
xas_try_split() splits an order-9 to order-0:
---------------------------------
| | | | | | | | |
| 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| | | | | | | | |
---------------------------------
|
|
V
-----------
| xa_node |
-----------
Link: https://lkml.kernel.org/r/20250307174001.242794-1-ziy@nvidia.com
Link: https://lkml.kernel.org/r/20250307174001.242794-2-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Kairui Song <kasong@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Fixes and cleanups to xarray", v5.
This series contains some random fixes and cleanups to xarray. Patch 1-2
are fixes and patch 3-6 are cleanups. More details can be found in
respective patches.
This patch (of 5):
Similar to issue fixed in commit cbc02854331ed ("XArray: Do not return
sibling entries from xa_load()"), we may return sibling entries from
xas_find_marked as following:
Thread A: Thread B:
xa_store_range(xa, entry, 6, 7, gfp);
xa_set_mark(xa, 6, mark)
XA_STATE(xas, xa, 6);
xas_find_marked(&xas, 7, mark);
offset = xas_find_chunk(xas, advance, mark);
[offset is 6 which points to a valid entry]
xa_store_range(xa, entry, 4, 7, gfp);
entry = xa_entry(xa, node, 6);
[entry is a sibling of 4]
if (!xa_is_node(entry))
return entry;
Skip sibling entry like xas_find() does to protect caller from seeing
sibling entry from xas_find_marked() or caller may use sibling entry
as a valid entry and crash the kernel.
Besides, load_race() test is modified to catch mentioned issue and modified
load_race() only passes after this fix is merged.
Here is an example how this bug could be triggerred in tmpfs which
enables large folio in mapping:
Let's take a look at involved racer:
1. How pages could be created and dirtied in shmem file.
write
ksys_write
vfs_write
new_sync_write
shmem_file_write_iter
generic_perform_write
shmem_write_begin
shmem_get_folio
shmem_allowable_huge_orders
shmem_alloc_and_add_folios
shmem_alloc_folio
__folio_set_locked
shmem_add_to_page_cache
XA_STATE_ORDER(..., index, order)
xax_store()
shmem_write_end
folio_mark_dirty()
2. How dirty pages could be deleted in shmem file.
ioctl
do_vfs_ioctl
file_ioctl
ioctl_preallocate
vfs_fallocate
shmem_fallocate
shmem_truncate_range
shmem_undo_range
truncate_inode_folio
filemap_remove_folio
page_cache_delete
xas_store(&xas, NULL);
3. How dirty pages could be lockless searched
sync_file_range
ksys_sync_file_range
__filemap_fdatawrite_range
filemap_fdatawrite_wbc
do_writepages
writeback_use_writepage
writeback_iter
writeback_get_folio
filemap_get_folios_tag
find_get_entry
folio = xas_find_marked()
folio_try_get(folio)
Kernel will crash as following:
1.Create 2.Search 3.Delete
/* write page 2,3 */
write
...
shmem_write_begin
XA_STATE_ORDER(xas, i_pages, index = 2, order = 1)
xa_store(&xas, folio)
shmem_write_end
folio_mark_dirty()
/* sync page 2 and page 3 */
sync_file_range
...
find_get_entry
folio = xas_find_marked()
/* offset will be 2 */
offset = xas_find_chunk()
/* delete page 2 and page 3 */
ioctl
...
xas_store(&xas, NULL);
/* write page 0-3 */
write
...
shmem_write_begin
XA_STATE_ORDER(xas, i_pages, index = 0, order = 2)
xa_store(&xas, folio)
shmem_write_end
folio_mark_dirty(folio)
/* get sibling entry from offset 2 */
entry = xa_entry(.., 2)
/* use sibling entry as folio and crash kernel */
folio_try_get(folio)
Link: https://lkml.kernel.org/r/20241213122523.12764-1-shikemeng@huaweicloud.com
Link: https://lkml.kernel.org/r/20241213122523.12764-2-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Mattew Wilcox <willy@infradead.org> [English fixes]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add some maple_tree alloc node tese case.
Link: https://lkml.kernel.org/r/20240626160631.3636515-2-Liam.Howlett@oracle.com
Signed-off-by: Jiazi Li <jqqlijiazi@gmail.com>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Suggested-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a regression test to assert that, when performing a spanning store
which consumes the entirety of the rightmost right leaf node does not
result in maple tree corruption when doing so.
This achieves this by building a test tree of 3 levels and establishing a
store which ultimately results in a spanned store of this nature.
Link: https://lkml.kernel.org/r/30cdc101a700d16e03ba2f9aa5d83f2efa894168.1728314403.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It is possible for a bulk operation (MA_STATE_BULK is set) to enter the
new_end < mt_min_slots[type] case and set wr_rebalance as a store type.
This is incorrect as bulk stores do not rebalance per write, but rather
after the all of the writes are done through the mas_bulk_rebalance()
path. Therefore, add a check to make sure MA_STATE_BULK is not set before
we return wr_rebalance as the store type.
Also add a test to make sure wr_rebalance is never the store type when
doing bulk operations via mas_expected_entries()
This is a hotfix for this rc however it has no userspace effects as there
are no users of the bulk insertion mode.
Link: https://lkml.kernel.org/r/20241011214451.7286-1-sidhartha.kumar@oracle.com
Fixes: 5d659bbb52a2 ("maple_tree: introduce mas_wr_store_type()")
Suggested-by: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Sidhartha <sidhartha.kumar@oracle.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
- new memblock_estimated_nr_free_pages() helper to replace
totalram_pages() which is less accurate when
CONFIG_DEFERRED_STRUCT_PAGE_INIT is set
- fixes for memblock tests
* tag 'memblock-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
s390/mm: get estimated free pages by memblock api
kernel/fork.c: get estimated free pages by memblock api
mm/memblock: introduce a new helper memblock_estimated_nr_free_pages()
memblock test: fix implicit declaration of function 'strscpy'
memblock test: fix implicit declaration of function 'isspace'
memblock test: fix implicit declaration of function 'memparse'
memblock test: add the definition of __setup()
memblock test: fix implicit declaration of function 'virt_to_phys'
tools/testing: abstract two init.h into common include directory
memblock tests: include export.h in linkage.h as kernel dose
memblock tests: include memory_hotplug.h in mmzone.h as kernel dose
|
|
Separate call to mas_destroy() from mas_nomem() so we can check for no
memory errors without destroying the current maple state in
mas_store_gfp(). We then add calls to mas_destroy() to callers of
mas_nomem().
Link: https://lkml.kernel.org/r/20240814161944.55347-6-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce mas_wr_store_type() which will set the correct store type based
on a walk of the tree. In mas_wr_node_store() the <= min_slots condition
is changed to < as if new_end is = to mt_min_slots then there is not
enough room.
mas_prealloc_calc() is also introduced to abstract the calculation used to
determine the number of nodes needed for a store operation.
In this change a call to mas_reset() is removed in the error case of
mas_prealloc(). This is only needed in the MA_STATE_REBALANCE case of
mas_destroy(). We can move the call to mas_reset() directly to
mas_destroy().
Also, add a test case to validate the order that we check the store type
in is correct. This test models a vma expanding and then shrinking which
is part of the boot process.
Link: https://lkml.kernel.org/r/20240814161944.55347-5-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add new callback fields to the userspace implementation of struct
kmem_cache. This allows for executing callback functions in order to
further test low memory scenarios where node allocation is retried.
This callback can help test race conditions by calling a function when a
low memory event is tested.
Link: https://lkml.kernel.org/r/20240812190543.71967-2-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The core components contained within the radix-tree tests which provide
shims for kernel headers and access to the maple tree are useful for
testing other things, so separate them out and make the radix tree tests
dependent on the shared components.
This lays the groundwork for us to add VMA tests of the newly introduced
vma.c file.
Link: https://lkml.kernel.org/r/1ee720c265808168e0d75608e687607d77c36719.1722251717.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Gow <davidgow@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Kees Cook <kees@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Rae Moar <rmoar@google.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently we have two test suits define its own init.h. This is a little
redundant.
Let's create a init.h in common include directory and merge these two
into it.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Mike Rapoport <rppt@kernel.org>
CC: Liam R. Howlett <Liam.Howlett@oracle.com>
Link: https://lore.kernel.org/r/20240712035138.24674-3-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Pull bitmap updates from Yury Norov:
"Random fixes"
* tag 'bitmap-6.11-rc1' of https://github.com:/norov/linux:
riscv: Remove unnecessary int cast in variable_fls()
radix tree test suite: put definition of bitmap_clear() into lib/bitmap.c
bitops: Add a comment explaining the double underscore macros
lib: bitmap: add missing MODULE_DESCRIPTION() macros
cpumask: introduce assign_cpu() macro
|
|
In tools/ directory, function bitmap_clear() is currently only used in
object file tools/testing/radix-tree/xarray.o.
But instead of keeping a bitmap.c with only bitmap_clear() definition in
radix-tree's own directory, it would be more proper to put it in common
directory lib/.
Sync the kernel definition and link some related libs, no functional
change is expected.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Matthew Wilcox <willy@infradead.org>
CC: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
Userspace builds of the radix-tree testing suite fails because of patch
KUnit: add missing MODULE_DESCRIPTION() macros for lib/test_*.ko. Add the
proper defines to tools/testing/radix-tree/idr-test.c so
MODULE_DESCRIPTION has a definition. This allows the build to succeed.
Link: https://lkml.kernel.org/r/20240626232100.306130-1-sidhartha.kumar@oracle.com
Fixes: f069e33dafe1 ("KUnit: add missing MODULE_DESCRIPTION() macros for lib/test_*.ko")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Jeff Johnson <quic_jjohnson@quicinc.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Userspace builds of the radix-tree testing suite fails because of commit
test_maple_tree: add the missing MODULE_DESCRIPTION() macro. Add the
proper defines to tools/testing/radix-tree/maple.c and
tools/testing/radix-tree/xarray.c so MODULE_DESCRIPTION has a definition.
This allows the build to succeed.
Link: https://lkml.kernel.org/r/20240617195221.106565-1-sidhartha.kumar@oracle.com
Fixes: 9f8090e8c4d1 ("test_maple_tree: add the missing MODULE_DESCRIPTION() macro")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Jeff Johnson <quic_jjohnson@quicinc.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "test_xarray: couple of fixes for v6-9-rc6", v2.
Here are a couple of fixes which should be merged into the queue for
v6.9-rc6. The first one was reported by Liam, after fixing that I noticed
an issue with a test, and a fix for that is in the second patch.
This patch (of 2):
Liam reported that compiling the test_xarray on userspace was broken. I
was not even aware that was possible but you can via and you can run these
tests in userspace with:
make -C tools/testing/radix-tree
./tools/testing/radix-tree/xarray
Add the two helpers we need to fix compilation. We don't need a userspace
schedule() so just make it do nothing.
Link: https://lkml.kernel.org/r/20240423192221.301095-1-mcgrof@kernel.org
Link: https://lkml.kernel.org/r/20240423192221.301095-2-mcgrof@kernel.org
Fixes: a60cc288a1a2 ("test_xarray: add tests for advanced multi-index use")
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reported-by: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Avoid pointer type value compared with 0 to make code clear.
./tools/testing/radix-tree/maple.c:34142:15-16: WARNING comparing pointer to 0.
Link: https://lkml.kernel.org/r/20231208020450.7003-1-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7696
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
mas_preallocate() defaults to requesting 1 node for preallocation and then
,depending on the type of store, will update the request variable. There
isn't a check for a slot store type, so slot stores are preallocating the
default 1 node. Slot stores do not require any additional nodes, so add a
check for the slot store case that will bypass node_count_gfp(). Update
the tests to reflect that slot stores do not require allocations.
User visible effects of this bug include increased memory usage from the
unneeded node that was allocated.
Link: https://lkml.kernel.org/r/20231213205058.386589-1-sidhartha.kumar@oracle.com
Fixes: 0b8bb544b1a7 ("maple_tree: update mas_preallocate() testing")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that the status of the maple state is outside of the node, the
mas_searchable() function can be dropped for easier open-coding of what is
going on.
Link: https://lkml.kernel.org/r/20231101171629.3612299-10-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The maple tree node is overloaded to keep status as well as the active
node. This, unfortunately, results in a re-walk on underflow or overflow.
Since the maple state has room, the status can be placed in its own enum
in the structure. Once an underflow/overflow is detected, certain modes
can restore the status to active and others may need to re-walk just that
one node to see the entry.
The status being an enum has the benefit of detecting unhandled status in
switch statements.
[Liam.Howlett@oracle.com: fix comments about MAS_*]
Link: https://lkml.kernel.org/r/20231106154124.614247-1-Liam.Howlett@oracle.com
[Liam.Howlett@oracle.com: update forking to separate maple state and node]
Link: https://lkml.kernel.org/r/20231106154551.615042-1-Liam.Howlett@oracle.com
[Liam.Howlett@oracle.com: fix mas_prev() state separation code]
Link: https://lkml.kernel.org/r/20231207193319.4025462-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20231101171629.3612299-9-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Analysis of the mas_for_each() iteration showed that there is a
significant time spent finding the end of a node. This time can be
greatly reduced if the end of the node is cached in the maple state. Care
must be taken to update & invalidate as necessary.
Link: https://lkml.kernel.org/r/20231101171629.3612299-5-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
__mas_set_range() was created to shortcut resetting the maple state and a
debug check was added to the caller (the vma iterator) to ensure the
internal maple state remains safe to use. Move the debug check from the
vma iterator into the maple tree itself so other users do not incorrectly
use the advanced maple state modification.
Fallout from this change include a large amount of debug setup needed to
be moved to earlier in the header, and the maple_tree.h radix-tree test
code needed to move the inclusion of the header to after the atomic
define. None of those changes have functional changes.
Link: https://lkml.kernel.org/r/20231101171629.3612299-4-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Skip other tests when BENCH is enabled so that performance can be measured
in user space.
Link: https://lkml.kernel.org/r/20231027033845.90608-8-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add test for mtree_dup().
Test by duplicating different maple trees and then comparing the two
trees. Includes tests for duplicating full trees and memory allocation
failures on different nodes.
Link: https://lkml.kernel.org/r/20231027033845.90608-6-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When kmem_cache_alloc_bulk() fails to allocate, leave the freed pointers
in the array. This enables a more accurate simulation of the kernel's
behavior and allows for testing potential double-free scenarios.
Link: https://lkml.kernel.org/r/20231027033845.90608-5-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The bulk allocation is iterating through an array and storing enough
memory for the entire bulk allocation instead of a single array entry.
Only allocate an array element of the size set in the kmem_cache.
Link: https://lkml.kernel.org/r/20230929201359.2857583-1-Liam.Howlett@oracle.com
Fixes: cc86e0c2f306 ("radix tree test suite: add support for slab bulk APIs")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull xarray fixes from Matthew Wilcox:
- Fix a bug encountered by people using bittorrent where they'd get
NULL pointer dereferences on page cache lookups when using XFS
- Two documentation fixes
* tag 'xarray-6.6' of git://git.infradead.org/users/willy/xarray:
idr: fix param name in idr_alloc_cyclic() doc
xarray: Document necessary flag in alloc functions
XArray: Do not return sibling entries from xa_load()
|
|
|
|
Since the mas_preallocate() calculation has been updated to be more
precise, the testing must also be updated to check for what is expected.
Link: https://lkml.kernel.org/r/20230724183157.3939892-13-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current preallocation strategy is to preallocate the absolute
worst-case allocation for a tree modification. The entry (or NULL) is
needed to know how many nodes are needed to write to the tree. Start by
adding the argument to the mas_preallocate() definition.
Link: https://lkml.kernel.org/r/20230724183157.3939892-8-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add test for expanding range in RCU mode. If we use the fast path of the
slot store to expand range in RCU mode, this test will fail.
Link: https://lkml.kernel.org/r/20230628073657.75314-3-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently the pthread allocation for each array item is based on the size
of a pthread_t pointer and should be the size of the pthread_t structure,
so the allocation is under-allocating the correct size. Fix this by using
the size of each element in the pthreads array.
Static analysis cppcheck reported:
tools/testing/radix-tree/regression1.c:180:2: warning: Size of pointer
'threads' used instead of size of its data. [pointerSize]
Link: https://lkml.kernel.org/r/20230727160930.632674-1-colin.i.king@gmail.com
Fixes: 1366c37ed84b ("radix tree test harness")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It is possible for xa_load() to observe a sibling entry pointing to
another sibling entry. An example:
Thread A: Thread B:
xa_store_range(xa, entry, 188, 191, gfp);
xa_load(xa, 191);
entry = xa_entry(xa, node, 63);
[entry is a sibling of 188]
xa_store_range(xa, entry, 184, 191, gfp);
if (xa_is_sibling(entry))
offset = xa_to_sibling(entry);
entry = xa_entry(xas->xa, node, offset);
[entry is now a sibling of 184]
It is sufficient to go around this loop until we hit a non-sibling entry.
Sibling entries always point earlier in the node, so we are guaranteed
to terminate this search.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Fixes: 6b24ca4a1a8d ("mm: Use multi-index entries in the page cache")
Cc: stable@vger.kernel.org
|
|
Internal node counting was altered and the 64 bit test was updated,
however the 32bit test was missed.
Restore the 32bit test to a functional state.
Link: https://lore.kernel.org/linux-mm/CAMuHMdV4T53fOw7VPoBgPR7fP6RYqf=CBhD_y_vOg53zZX_DnA@mail.gmail.com/
Link: https://lkml.kernel.org/r/20230712173916.168805-2-Liam.Howlett@oracle.com
Fixes: 541e06b772c1 ("maple_tree: remove GFP_ZERO from kmem_cache_alloc() and kmem_cache_alloc_bulk()")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
The xarray.c file contains the only call to radix_tree_node_rcu_free(),
and it comes with its own extern declaration for it. This means the
function definition causes a missing-prototype warning:
lib/radix-tree.c:288:6: error: no previous prototype for 'radix_tree_node_rcu_free' [-Werror=missing-prototypes]
Instead, move the declaration for this function to a new header that can
be included by both, and do the same for the radix_tree_node_cachep
variable that has the same underlying problem but does not cause a warning
with gcc.
[zhangpeng.00@bytedance.com: fix building radix tree test suite]
Link: https://lkml.kernel.org/r/20230521095450.21332-1-zhangpeng.00@bytedance.com
Link: https://lkml.kernel.org/r/20230516194212.548910-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The test functions are not needed after the module is removed, so mark
them as such. Add __exit to the module removal function. Some other
variables have been marked as const static as well.
Link: https://lkml.kernel.org/r/20230518145544.1722059-20-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vernon Yang <vernon2gm@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The test code is less useful without debug, but can still do general
validations. Define mt_dump(), mas_dump() and mas_wr_dump() as a noop if
debug is not enabled and document it in the test module information that
more information can be obtained with another kernel config option.
MT_BUG_ON() will report a failures without tree dumps, and the output will
be less useful.
Link: https://lkml.kernel.org/r/20230518145544.1722059-17-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vernon Yang <vernon2gm@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Allow different formatting strings to be used when dumping the tree.
Currently supports hex and decimal.
Link: https://lkml.kernel.org/r/20230518145544.1722059-6-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vernon Yang <vernon2gm@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The maple tree node limits are implied by the parent. When walking up the
tree, the limit may not be known until a slot that does not have implied
limits are encountered. However, if the node is the left-most or
right-most node, the walking up to find that limit can be skipped.
This commit also fixes the debug/testing code that was not setting the
limit on walking down the tree as that optimization is not compatible with
this change.
Link: https://lkml.kernel.org/r/20230518145544.1722059-4-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vernon Yang <vernon2gm@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a test case to check whether the number of maple_alloc structures is
actually equal to mas->alloc->total.
Link: https://lkml.kernel.org/r/20230411041005.26205-2-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
During the development of the maple tree, the strategy of freeing multiple
nodes changed and, in the process, the pivots were reused to store
pointers to dead nodes. To ensure the readers see accurate pivots, the
writers need to mark the nodes as dead and call smp_wmb() to ensure any
readers can identify the node as dead before using the pivot values.
There were two places where the old method of marking the node as dead
without smp_wmb() were being used, which resulted in RCU readers seeing
the wrong pivot value before seeing the node was dead. Fix this race
condition by using mte_set_node_dead() which has the smp_wmb() call to
ensure the race is closed.
Add a WARN_ON() to the ma_free_rcu() call to ensure all nodes being freed
are marked as dead to ensure there are no other call paths besides the two
updated paths.
This is necessary for the RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-6-surenb@google.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The parameter entry of mas_preallocate is not used, so drop it.
Link: https://lkml.kernel.org/r/20230110154211.1758562-1-vernon2gm@gmail.com
Signed-off-by: Vernon Yang <vernon2gm@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Preallocations are common in the VMA code to avoid allocating under
certain locking conditions. The preallocations must also cover the
worst-case scenario. Removing the GFP_ZERO flag from the
kmem_cache_alloc() (and bulk variant) calls will reduce the amount of time
spent zeroing memory that may not be used. Only zero out the necessary
area to keep track of the allocations in the maple state. Zero the entire
node prior to using it in the tree.
This required internal changes to node counting on allocation, so the test
code is also updated.
This restores some micro-benchmark performance: up to +9% in mmtests mmap1
by my testing +10% to +20% in mmap, mmapaddr, mmapmany tests reported by
Red Hat
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2149636
Link: https://lkml.kernel.org/r/20230105160427.2988454-1-Liam.Howlett@oracle.com
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Reported-by: Jirka Hladky <jhladky@redhat.com>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add the span to the year of the development.
Link: https://lkml.kernel.org/r/20221025173709.2718725-1-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Along the development cycle, the testing code support for module/in-kernel
compiles was removed. Restore this functionality by moving any internal
API tests to the userspace side, as well as threading tests. Fix the
lockdep issues and add a way to reduce memory usage so the tests can
complete with KASAN + memleak detection. Make the tests work on 32 bit
hosts where possible and detect 32 bit hosts in the radix test suite.
[akpm@linux-foundation.org: fix module export]
[akpm@linux-foundation.org: fix it some more]
[liam.howlett@oracle.com: fix compile warnings on 32bit build in check_find()]
Link: https://lkml.kernel.org/r/20221107203816.1260327-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20221028180415.3074673-1-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
