| Age | Commit message (Collapse) | Author |
|---|
|
Drivers report a string with a name for each PCM, log it during startup of
pcm-test as a diagnostic aid.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20240716-alsa-kselftest-board-name-v2-2-60f1acdde096@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Currently for the PCM and mixer tests we report test names which identify
the card being tested with the card number. This ensures we have unique
names but since card numbers are dynamically assigned at runtime the names
we end up with will often not be stable on systems with multiple cards
especially where those cards are provided by separate modules loeaded at
runtime. This makes it difficult for automated systems and UIs to relate
test results between runs on affected platforms.
Address this by replacing our use of card numbers with card names which are
more likely to be stable across runs. We use the card ID since it is
guaranteed to be unique by default, unlike the long name. There is still
some vulnerability to ordering issues if multiple cards with the same base
ID are present in the system but have separate dependencies but not all
drivers put distinguishing information in their long names.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20240716-alsa-kselftest-board-name-v2-1-60f1acdde096@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Inside of test_pcm_time() arguments are printed via printf
but '%d' is used to print @flags (of type unsigned int).
Use '%u' instead, just like we do everywhere else.
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20240626084859.4350-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When parsing the configs, keep track of card configurations that match
the current system but haven't matched any card, and report those as
test failures as they represent that a card which was expected to be
present on the system is missing. This allows the configuration files to
not only be used to detect missing PCM devices (which is currently
possible) but also that the soundcard hasn't been registered at all.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230919152702.100617-1-nfraprado@collabora.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
These variables are never referenced in the code, just remove them.
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230908081040.197243-1-dingxiang@cmss.chinamobile.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Currently test_pcm_time() streams audio on each PCM with each
configuration for 4 seconds. This time can add up, and with the current
45 second kselftest timeout, some machines like mt8192-asurada-spherion
can't even run to completion. Lower the duration to 2 seconds to cut the
test duration in half, without reducing the test coverage.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20230620220839.2215057-3-nfraprado@collabora.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The duration to stream for and time margin to consider the stream failed
are currently hardcoded values. Move them to variables so they can be
reused and more easily changed.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230620220839.2215057-2-nfraprado@collabora.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
GCC 11.3.0 issues warnings in this module about wrong sizes of format
specifiers:
pcm-test.c: In function ‘test_pcm_time’:
pcm-test.c:384:68: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 5 \
has type ‘unsigned int’ [-Wformat=]
384 | snprintf(msg, sizeof(msg), "rate mismatch %ld != %ld", rate, rrate);
pcm-test.c:455:53: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has \
type ‘long int’ [-Wformat=]
455 | "expected %d, wrote %li", rate, frames);
pcm-test.c:462:53: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has \
type ‘long int’ [-Wformat=]
462 | "expected %d, wrote %li", rate, frames);
pcm-test.c:467:53: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has \
type ‘long int’ [-Wformat=]
467 | "expected %d, wrote %li", rate, frames);
Simple fix according to compiler's suggestion removed the warnings.
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230524191528.13203-1-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When reporting errors or skips we currently include the diagnostic message
indicating why we're failing or skipping. This isn't ideal since KTAP
defines the entire print as the test name, so if there's an error then test
systems won't detect the test as being the same one as a passing test. Move
the diagnostic to a separate ksft_print_msg() to avoid this issue, the test
name part will always be the same for passes, fails and skips and the
diagnostic information is still displayed.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230323-alsa-pcm-test-names-v1-1-8be67a8885ff@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
It can be helpful to know which card numbers apply to which cards in a
multi-card system so log the card names when we start the test programs.
People looking at the logs may not have direct access to the systems being
tested.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230223-alsa-log-ctl-name-v1-2-ac0f10cc4db2@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
With each test taking 4 seconds the runtime of pcm-test can add up. Since
generally each card in the system is physically independent and will be
unaffected by what's going on with other cards we can mitigate this by
testing each card in parallel. Make a list of cards as we enumerate the
system and then start a thread for each, then join the threads to ensure
they have all finished. The threads each run the same tests we currently
run for each PCM on the card before exiting.
The list of PCMs is kept global since it helps with global operations
like working out our planned number of tests and identifying missing PCMs
and it seemed neater to check for PCMs on the right card in the card
thread than make every PCM loop iterate over cards as well.
We don't run per-PCM tests in parallel since in embedded systems it can
be the case that resources are shared between the PCMs and operations on
one PCM on a card may constrain what can be done on another PCM on the same
card leading to potentially unstable results.
We use a mutex to ensure that the reporting of results is serialised and we
don't have issues with anything like the current test number, we could do
this in the kselftest framework but it seems like this might cause problems
for other tests that are doing lower level testing and building in
constrained environments such as nolibc so this seems more sensible.
Note that the ordering of the tests can't be guaranteed as things stand,
this does not seem like a major problem since the numbering of tests often
changes as test programs are changed so results parsers are expected to
rely on the test name rather than the test numbers. We also now prefix the
machine generated test name when printing the description of the test since
this is logged before streaming starts.
On my two card desktop system this reduces the overall runtime by a
third.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230203-alsa-pcm-test-card-thread-v1-1-59941640ebba@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In order to help with the comprehensibility of tests it is useful for us to
document what the test is attempting to cover. We could just do this through
comments in the configuration files but in order to aid people looking at
the output of the program in logs let's provide support for an optional
'description' directive which we log prior to running each of the tests.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-alsa-pcm-test-hacks-v4-5-5a152e65b1e1@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Since we don't know what the capabilities of an unknown card is any of our
standard tests may fail due to not being supported by the system. Set a
flag once we've configured the stream, just before we start data, to say
that the system accepted our stream configuration.
Since there shouldn't be a use case for tests that are specified for the
individual system failing for those tests we also add a new test which
fails if we are unable to configure the settings specified in the system
specific configuration file.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-alsa-pcm-test-hacks-v4-4-5a152e65b1e1@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Rather than allowing the system specific tests to replace the default set
of tests instead run them in addition to the standard set of tests. In
order to avoid name collisions in the reported tests we add an additional
test class element to the reported tests. Doing this means we always get a
consistent baseline of coverage no matter what card we run on but retain
the ability to specify specific coverage for a given system.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-alsa-pcm-test-hacks-v4-3-5a152e65b1e1@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Obtain all test parameters from the configuration files. The defaults
are defined in the pcm-test.conf file. The test count and parameters
may be variable per specific hardware.
Also, handle alt_formats field now (with the fixes in the format loop).
It replaces the original "automatic" logic which is not so universal.
The code may be further extended to skip various tests based
on the configuration hints, if the exact PCM hardware parameters
are not available for the given hardware.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-alsa-pcm-test-hacks-v4-2-5a152e65b1e1@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation to adopting a better, more comprehensive approach to
adding the coverage that was just added using some changes from Jaroslav
which were sent at the same time the recently added improvements were
being applied drop what was applied. This reverts:
7d721baea138 "kselftest/alsa: Add more coverage of sample rates and channel counts"
ee12040dd53a "kselftest/alsa: Provide more meaningful names for tests"
ae95efd9754c "kselftest/alsa: Don't any configuration in the sample config"
8370d9b00c92 Revert "kselftest/alsa: Report failures to set the requested channels as skips"
f944f8b539ea "kselftest/alsa: Report failures to set the requested sample rate as skips"
22eeb8f531c1 "kselftest/alsa: Refactor pcm-test to list the tests to run in a struct"
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221208-alsa-pcm-test-hacks-v4-1-5a152e65b1e1@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Now that we can skip unsupported configurations add some more test cases
using that, cover 8kHz, 44.1kHz and 96kHz plus 8kHz mono and 48kHz 6
channel.
44.1kHz is a different clock base to the existing 48kHz tests and may
therefore show problems with the clock configuration if only 8kHz based
rates are really available (or help diagnose if bad clocking is due to
only 44.1kHz based rates being supported). 8kHz mono and 48Hz 6 channel
are real world formats and should show if clocking does not account for
channel count properly.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221201170745.1111236-7-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Rather than just numbering the tests try to provide semi descriptive names
for what the tests are trying to cover. This also has the advantage of
meaning we can add more tests without having to keep the list of tests
ordered by existing number which should make it easier to understand what
we're testing and why.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221201170745.1111236-6-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If constraint selection gives us a number of channels other than the one
that we asked for that isn't a failure, that is the device implementing
constraints and advertising that it can't support whatever we asked
for. Report such cases as a test skip rather than failure so we don't have
false positives.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221201170745.1111236-4-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If constraint selection gives us a sample rate other than the one that we
asked for that isn't a failure, that is the device implementing sample
rate constraints and advertising that it can't support whatever we asked
for. Report such cases as a test skip rather than failure so we don't have
false positives.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221201170745.1111236-3-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In order to help make the list of tests a bit easier to maintain refactor
things so we pass the tests around as a struct with the parameters in,
enabling us to add new tests by adding to a table with comments saying
what each of the number are. We could also use named initializers if we get
more parameters.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221201170745.1111236-2-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The minimal alsa-lib configuration code is similar in both mixer
and pcm tests. Move this code to the shared conf.c source file.
Also, fix the build rules inspired by rseq tests. Build libatest.so
which is linked to the both test utilities dynamically.
Also, set the TEST_FILES variable for lib.mk.
Cc: linux-kselftest@vger.kernel.org
Cc: Shuah Khan <shuah@kernel.org>
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221129085306.2345763-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This initial code does a simple sample transfer tests. By default,
all PCM devices are detected and tested with short and long
buffering parameters for 4 seconds. If the sample transfer timing
is not in a +-100ms boundary, the test fails. Only the interleaved
buffering scheme is supported in this version.
The configuration may be modified with the configuration files.
A specific hardware configuration is detected and activated
using the sysfs regex matching. This allows to use the DMI string
(/sys/class/dmi/id/* tree) or any other system parameters
exposed in sysfs for the matching for the CI automation.
The configuration file may also specify the PCM device list to detect
the missing PCM devices.
v1..v2:
- added missing alsa-local.h header file
Cc: Mark Brown <broonie@kernel.org>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@intel.com>
Cc: Liam Girdwood <liam.r.girdwood@intel.com>
Cc: Jesse Barnes <jsbarnes@google.com>
Cc: Jimmy Cheng-Yi Chiang <cychiang@google.com>
Cc: Curtis Malainey <cujomalainey@google.com>
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221108115914.3751090-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
