| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.16, take #2
- Rework of system register accessors for system registers that are
directly writen to memory, so that sanitisation of the in-memory
value happens at the correct time (after the read, or before the
write). For convenience, RMW-style accessors are also provided.
- Multiple fixes for the so-called "arch-timer-edge-cases' selftest,
which was always broken.
|
|
arch_timer_edge_cases
arch_timer_edge_cases uses ~0 as the maximum counter value, however there's
no architectural guarantee that this is valid.
Figure out the effective counter width based on the effective frequency
like it's done by the kernel.
This also serves as a workaround for AC03_CPU_14 that led to the
following assertion failure on ampere-one machines:
==== Test Assertion Failure ====
arm64/arch_timer_edge_cases.c:169: timer_condition == istatus
pid=11236 tid=11236 errno=4 - Interrupted system call
1 0x0000000000404ce7: test_run at arch_timer_edge_cases.c:938
2 0x0000000000401ebb: main at arch_timer_edge_cases.c:1053
3 0x0000ffff9fa8625b: ?? ??:0
4 0x0000ffff9fa8633b: ?? ??:0
5 0x0000000000401fef: _start at ??:?
0x1 != 0x0 (timer_condition != istatus)
Note that the following subtest only worked since the counter initialized
with CVAL_MAX would instantly overflow (which is no longer the case):
test_set_cnt_after_cval_no_irq(timer, 0, DEF_CNT, CVAL_MAX, sm);
To fix this we could swap CVAL_MAX for 0 here but since that is already
done by test_move_counters_behind_timers() let's remove that subtest.
Link: https://lore.kernel.org/kvmarm/ac1de1d2-ef2b-d439-dc48-8615e121b07b@redhat.com
Link: https://amperecomputing.com/assets/AmpereOne_Developer_ER_v0_80_20240823_28945022f4.pdf
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250605103613.14544-5-sebott@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
arch_timer_edge_cases hits the following assertion in < 10% of the test runs:
==== Test Assertion Failure ====
arm64/arch_timer_edge_cases.c:490: timer_get_cntct(timer) >= DEF_CNT + (timer_get_cntfrq() * (uint64_t)(delta_2_ms) / 1000)
pid=17110 tid=17110 errno=4 - Interrupted system call
1 0x0000000000404ec7: test_run at arch_timer_edge_cases.c:945
2 0x0000000000401fa3: main at arch_timer_edge_cases.c:1074
3 0x0000ffffa774b587: ?? ??:0
4 0x0000ffffa774b65f: ?? ??:0
5 0x000000000040206f: _start at ??:?
timer_get_cntct(timer) >= DEF_CNT + msec_to_cycles(delta_2_ms)
Enabling the timer without proper xval initialization in set_tval_irq()
resulted in an early interrupt during timer reprogramming. Make sure
to set the xval before setting the enable bit.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250605103613.14544-4-sebott@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
arch_timer_edge_cases tries to migrate itself across host cpus. Before
the first test, it migrates to cpu 0 by setting up an affinity mask with
only bit 0 set. After that it looks for the next possible cpu in the
current affinity mask which still has only bit 0 set. So there is no
migration at all.
Fix this by reading the default mask at start and use this to find
the next cpu in each iteration.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250605103613.14544-3-sebott@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Fix the help text for arch_timer_edge_cases to show the correct
option for setting the wait time.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250605103613.14544-2-sebott@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM SVM changes for 6.16:
- Wait for target vCPU to acknowledge KVM_REQ_UPDATE_PROTECTED_GUEST_STATE to
fix a race between AP destroy and VMRUN.
- Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for the VM.
- Add support for ALLOWED_SEV_FEATURES.
- Add #VMGEXIT to the set of handlers special cased for CONFIG_RETPOLINE=y.
- Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing features
that utilize those bits.
- Don't account temporary allocations in sev_send_update_data().
- Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock Threshold.
|
|
KVM selftests changes for 6.16:
- Add support for SNP to the various SEV selftests.
- Add a selftest to verify fastops instructions via forced emulation.
- Add MGLRU support to the access tracking perf test.
|
|
KVM/riscv changes for 6.16
- Add vector registers to get-reg-list selftest
- VCPU reset related improvements
- Remove scounteren initialization from VCPU reset
- Support VCPU reset from userspace using set_mpstate() ioctl
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.16
* New features:
- Add large stage-2 mapping support for non-protected pKVM guests,
clawing back some performance.
- Add UBSAN support to the standalone EL2 object used in nVHE/hVHE and
protected modes.
- Enable nested virtualisation support on systems that support it
(yes, it has been a long time coming), though it is disabled by
default.
* Improvements, fixes and cleanups:
- Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. This ensures correctness of
emulation (the data is automatically extracted from the published
JSON files), and helps dealing with the evolution of the
architecture.
- Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
- New selftest checking the pKVM ownership transition rules
- Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
- Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
- Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
- Add a new selftest for the SVE host state being corrupted by a
guest.
- Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
- Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
- Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
- and the usual random cleanups.
|
|
* kvm-arm64/misc-6.16:
: .
: Misc changes and improvements for 6.16:
:
: - Add a new selftest for the SVE host state being corrupted by a guest
:
: - Keep HCR_EL2.xMO set at all times for systems running with the kernel at EL2,
: ensuring that the window for interrupts is slightly bigger, and avoiding
: a pretty bad erratum on the AmpereOne HW
:
: - Replace a couple of open-coded on/off strings with str_on_off()
:
: - Get rid of the pKVM memblock sorting, which now appears to be superflous
:
: - Drop superflous clearing of ICH_LR_EOI in the LR when nesting
:
: - Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers from
: a pretty bad case of TLB corruption unless accesses to HCR_EL2 are
: heavily synchronised
:
: - Add a per-VM, per-ITS debugfs entry to dump the state of the ITS tables
: in a human-friendly fashion
: .
KVM: arm64: Fix documentation for vgic_its_iter_next()
KVM: arm64: vgic-its: Add debugfs interface to expose ITS tables
arm64: errata: Work around AmpereOne's erratum AC04_CPU_23
KVM: arm64: nv: Remove clearing of ICH_LR<n>.EOI if ICH_LR<n>.HW == 1
KVM: arm64: Drop sort_memblock_regions()
KVM: arm64: selftests: Add test for SVE host corruption
KVM: arm64: Force HCR_EL2.xMO to 1 at all times in VHE mode
KVM: arm64: Replace ternary flags with str_on_off() helper
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add vector related tests with the ISA extension standard template.
However, the vector registers are bit tricky as the register length is
variable based on vlenb value of the system. That's why the macros are
defined with a default and overidden with actual value at runtime.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250430-kvm_selftest_improve-v3-3-eea270ff080b@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Currently, the sbi_pmu_test continues if the exception type is illegal
instruction because access to hpmcounter will generate that. However
illegal instruction exception may occur due to the other reasons
which should result in test assertion.
Use the stval to decode the exact type of instructions and which csrs are
being accessed if it is csr access instructions. Assert in all cases
except if it is a csr access instructions that access valid PMU related
registers.
Take this opportunity to remove the CSR_CYCLEH reference as the test is
compiled for RV64 only.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250430-kvm_selftest_improve-v3-2-eea270ff080b@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The current exeception register structure in selftests are missing
few registers (e.g stval). Instead of adding it manually, change
the ex_regs to align with pt_regs to make it future proof.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250430-kvm_selftest_improve-v3-1-eea270ff080b@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Some common KVM test cases are supported on LoongArch now as following:
coalesced_io_test
demand_paging_test
dirty_log_perf_test
dirty_log_test
guest_print_test
hardware_disable_test
kvm_binary_stats_test
kvm_create_max_vcpus
kvm_page_table_test
memslot_modification_stress_test
memslot_perf_test
set_memory_region_test
And other test cases are not supported by LoongArch such as rseq_test,
since it is not supported on LoongArch physical machine either.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add ucall test support for LoongArch, ucall method on LoongArch uses
undefined mmio area. It will cause vCPU exiting to hypervisor so that
hypervisor can communicate with vCPU.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add core KVM selftests support for LoongArch, it includes exception
handler, mmu page table setup and vCPU startup entry support.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add KVM selftests header files for LoongArch, including processor.h
and kvm_util_arch.h. It mainly contains LoongArch CSR register and page
table entry definition.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
On LoongArch system, 16K page is used in general and GVA width is 47 bit
while GPA width is 47 bit also, here add new VM mode VM_MODE_P47V47_16K.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add a test case to verify x86's bus lock exit functionality, which is now
supported on both Intel and AMD. Trigger bus lock exits by performing a
split-lock access, i.e. an atomic access that splits two cache lines.
Verify that the correct number of bus lock exits are generated, and that
the counter is incremented correctly and at the appropriate time based on
the underlying architecture.
Generate bus locks in both L1 and L2 (if nested virtualization is enabled),
as SVM's functionality in particular requires non-trivial logic to do the
right thing when running nested VMs.
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Co-developed-by: Manali Shukla <manali.shukla@amd.com>
Signed-off-by: Manali Shukla <manali.shukla@amd.com>
Link: https://lore.kernel.org/r/20250502050346.14274-6-manali.shukla@amd.com
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use MGLRU's debugfs interface to do access tracking instead of
page_idle. The logic to use the page_idle bitmap is left in, as it is
useful for kernels that do not have MGLRU built in.
When MGLRU is enabled, page_idle will report pages as still idle even
after being accessed, as MGLRU doesn't necessarily clear the Idle folio
flag when accessing an idle page, so the test will not attempt to use
page_idle if MGLRU is enabled but otherwise not usable.
Aging pages with MGLRU is much faster than marking pages as idle with
page_idle.
Co-developed-by: Axel Rasmussen <axelrasmussen@google.com>
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-8-jthoughton@google.com
[sean: print parsed features, not raw string]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
libcgroup.o is built separately from KVM selftests and cgroup selftests,
so different compiler flags used by the different selftests will not
conflict with each other.
Signed-off-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-7-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add an option to skip sanity check of number of still idle pages,
and set it by default to skip, in case hypervisor or NUMA balancing
is detected.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Co-developed-by: James Houghton <jthoughton@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-3-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Extract the guts of thp_configured() and get_trans_hugepagesz() to
standalone helpers so that the core logic can be reused for other sysfs
files, e.g. to query numa_balancing.
Opportunistically assert that the initial fscanf() read at least one byte,
and add a comment explaining the second call to fscanf().
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-2-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When MTE is supported but MTE_ASYMM is not (ID_AA64PFR1_EL1.MTE == 2)
ID_AA64PFR1_EL1.MTE_frac == 0xF indicates MTE_ASYNC is unsupported
and MTE_frac == 0 indicates it is supported.
As MTE_frac was previously unconditionally read as 0 from the guest
and user-space, check that using SET_ONE_REG to set it to 0 succeeds
but does not change MTE_frac from unsupported (0xF) to supported (0).
This is required as values originating from KVM from user-space must
be accepted to avoid breaking migration.
Also, to allow this MTE field to be tested, enable KVM_ARM_CAP_MTE
for the set_id_regs test. No effect on existing tests is expected.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Link: https://lore.kernel.org/r/20250512114112.359087-4-ben.horgan@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add a test to verify KVM's fastops emulation via forced emulation. KVM's
so called "fastop" infrastructure executes the to-be-emulated instruction
directly on hardware instead of manually emulating the instruction in
software, using various shenanigans to glue together the emulator context
and CPU state, e.g. to get RFLAGS fed into the instruction and back out
for the emulator.
Add testcases for all instructions that are low hanging fruit. While the
primary goal of the selftest is to validate the glue code, a secondary
goal is to ensure "emulation" matches hardware exactly, including for
arithmetic flags that are architecturally undefined. While arithmetic
flags may be *architecturally* undefined, their behavior is deterministic
for a given CPU (likely a given uarch, and possibly even an entire family
or class of CPUs). I.e. KVM has effectively been emulating underlying
hardware behavior for years.
Link: https://lore.kernel.org/r/20250506011250.1089254-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Until recently, the kernel could unexpectedly discard SVE state for a
period after a KVM_RUN ioctl, when the guest did not execute any
FPSIMD/SVE/SME instructions. We fixed that issue in commit:
fbc7e61195e2 ("KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state")
Add a test which tries to provoke that issue by manipulating SVE state
before/after running a guest which does not execute any FPSIMD/SVE/SME
instructions. The test executes a handful of iterations to miminize
the risk that the issue is masked by preemption.
Signed-off--by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250417-kvm-selftest-sve-signal-v1-1-6330c2f3da0c@kernel.org
[maz: Restored MR's SoB, fixed commit message according to MR's write-up]
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Trying to cut the branch you are sat on is pretty dumb. And so is
trying to disable the instruction set you are executing on.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20250429114117.3618800-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Extend sev_smoke_test to also run a minimal SEV-SNP smoke test that
initializes and sets up private memory regions required to run a simple
SEV-SNP guest.
Similar to its SEV-ES smoke test counterpart, this also does not
support GHCB and ucall yet and uses the GHCB MSR protocol to trigger an
exit of the type KVM_EXIT_SYSTEM_EVENT.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-11-prsampat@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
In preparation for SNP, cleanup the smoke test to decouple deriving type
from policy. This will allow reusing the existing interfaces for SNP.
No functional change intended.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-10-prsampat@amd.com
[sean: massage shortlog+changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Force the SEV-SNP VM type to set the KVM_MEM_GUEST_MEMFD flag for the
creation of private memslots.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-9-prsampat@amd.com
[sean: add a comment, don't break non-x86]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Extend the SEV library to include support for SNP ioctl() wrappers,
which aid in launching and interacting with a SEV-SNP guest.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-8-prsampat@amd.com
[sean: use BIT()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
In preparation for SNP, declutter the vm type check by introducing a
SEV-SNP VM type check as well as a transitive set of helper functions.
The SNP VM type is the subset of SEV-ES. Similarly, the SEV-ES and SNP
types are subset of the SEV VM type check.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-7-prsampat@amd.com
[sean: make the helpers static inlines]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
For SEV tests, assert() failures on VM type or fd do not provide
sufficient error reporting. Replace assert() with TEST_ASSERT_EQ() to
obtain more detailed information on the assertion condition failure,
including the call stack.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-6-prsampat@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move the SMT control check out of the hyperv_cpuid selftest so that it
is generally accessible all KVM selftests. Split the functionality into
a helper that populates a buffer with SMT control value which other
helpers can use to ascertain if SMT state is available and active.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-5-prsampat@amd.com
[sean: prepend is_ to the helpers]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Abstract rep vmmcall coded into the vmgexit helper for the sev
library.
No functional change intended.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-4-prsampat@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add the X86_FEATURE_SEV_SNP CPU feature to the architectural definition
for the SEV-SNP VM type to exercise the KVM_SEV_INIT2 call. Ensure that
the SNP test is skipped in scenarios where CPUID supports it but KVM
does not, preventing reporting of failure in such cases.
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-3-prsampat@amd.com
[sean: use the same pattern as SEV and SEV-ES]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA
- Use acquire/release semantics in the KVM FF-A proxy to avoid
reading a stale value for the FF-A version
- Fix KVM guest driver to match PV CPUID hypercall ABI
- Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work
s390:
- Don't use %pK for debug printing and tracepoints
x86:
- Use a separate subclass when acquiring KVM's per-CPU posted
interrupts wakeup lock in the scheduled out path, i.e. when adding
a vCPU on the list of vCPUs to wake, to workaround a false positive
deadlock. The schedule out code runs with a scheduler lock that the
wakeup handler takes in the opposite order; but it does so with
IRQs disabled and cannot run concurrently with a wakeup
- Explicitly zero-initialize on-stack CPUID unions
- Allow building irqbypass.ko as as module when kvm.ko is a module
- Wrap relatively expensive sanity check with KVM_PROVE_MMU
- Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
selftests:
- Add more scenarios to the MONITOR/MWAIT test
- Add option to rseq test to override /dev/cpu_dma_latency
- Bring list of exit reasons up to date
- Cleanup Makefile to list once tests that are valid on all
architectures
Other:
- Documentation fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
KVM: arm64: Use acquire/release to communicate FF-A version negotiation
KVM: arm64: selftests: Explicitly set the page attrs to Inner-Shareable
KVM: arm64: selftests: Introduce and use hardware-definition macros
KVM: VMX: Use separate subclasses for PI wakeup lock to squash false positive
KVM: VMX: Assert that IRQs are disabled when putting vCPU on PI wakeup list
KVM: x86: Explicitly zero-initialize on-stack CPUID unions
KVM: Allow building irqbypass.ko as as module when kvm.ko is a module
KVM: x86/mmu: Wrap sanity check on number of TDP MMU pages with KVM_PROVE_MMU
KVM: selftests: Add option to rseq test to override /dev/cpu_dma_latency
KVM: x86: Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
Documentation: kvm: remove KVM_CAP_MIPS_TE
Documentation: kvm: organize capabilities in the right section
Documentation: kvm: fix some definition lists
Documentation: kvm: drop "Capability" heading from capabilities
Documentation: kvm: give correct name for KVM_CAP_SPAPR_MULTITCE
Documentation: KVM: KVM_GET_SUPPORTED_CPUID now exposes TSC_DEADLINE
selftests: kvm: list once tests that are valid on all architectures
selftests: kvm: bring list of exit reasons up to date
selftests: kvm: revamp MONITOR/MWAIT tests
KVM: arm64: Don't translate FAR if invalid/unsafe
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64: First batch of fixes for 6.15
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA.
- Use acquire/release semantics in the KVM FF-A proxy to avoid reading
a stale value for the FF-A version.
- Fix KVM guest driver to match PV CPUID hypercall ABI.
- Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work.
|
|
Atomic instructions such as 'ldset' in the guest have been observed to
cause an EL1 data abort with FSC 0x35 (IMPLEMENTATION DEFINED fault
(Unsupported Exclusive or Atomic access)) on Neoverse-N3.
Per DDI0487L.a B2.2.6, atomic instructions are only architecturally
guaranteed for Inner/Outer Shareable Normal Write-Back memory. For
anything else the behavior is IMPLEMENTATION DEFINED and can lose
atomicity, or, in this case, generate an abort.
It would appear that selftests sets up the stage-1 mappings as Non
Shareable, leading to the observed abort. Explicitly set the
Shareability field to Inner Shareable for non-LPA2 page tables. Note
that for the LPA2 page table format, translations for cacheable memory
inherit the shareability attribute of the PTW, i.e. TCR_ELx.SH{0,1}.
Suggested-by: Oliver Upton <oupton@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20250405001042.1470552-3-rananta@google.com
[oliver: Rephrase changelog]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The kvm selftest library for arm64 currently configures the hardware
fields, such as shift and mask in the page-table entries and registers,
directly with numbers. While it add comments at places, it's better to
rewrite them with appropriate macros to improve the readability and
reduce the risk of errors. Hence, introduce macros to define the
hardware fields and use them in the arm64 processor library.
Most of the definitions are primary copied from the Linux's header,
arch/arm64/include/asm/pgtable-hwdef.h.
No functional change intended.
Suggested-by: Oliver Upton <oupton@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20250405001042.1470552-2-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- The sub-architecture selection Kconfig system has been cleaned up,
the documentation has been improved, and various detections have been
fixed
- The vector-related extensions dependencies are now validated when
parsing from device tree and in the DT bindings
- Misaligned access probing can be overridden via a kernel command-line
parameter, along with various fixes to misalign access handling
- Support for relocatable !MMU kernels builds
- Support for hpge pfnmaps, which should improve TLB utilization
- Support for runtime constants, which improves the d_hash()
performance
- Support for bfloat16, Zicbom, Zaamo, Zalrsc, Zicntr, Zihpm
- Various fixes, including:
- We were missing a secondary mmu notifier call when flushing the
tlb which is required for IOMMU
- Fix ftrace panics by saving the registers as expected by ftrace
- Fix a couple of stimecmp usage related to cpu hotplug
- purgatory_start is now aligned as per the STVEC requirements
- A fix for hugetlb when calculating the size of non-present PTEs
* tag 'riscv-for-linus-6.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (65 commits)
riscv: Add norvc after .option arch in runtime const
riscv: Make sure toolchain supports zba before using zba instructions
riscv/purgatory: 4B align purgatory_start
riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator
selftests: riscv: fix v_exec_initval_nolibc.c
riscv: Fix hugetlb retrieval of number of ptes in case of !present pte
riscv: print hartid on bringup
riscv: Add norvc after .option arch in runtime const
riscv: Remove CONFIG_PAGE_OFFSET
riscv: Support CONFIG_RELOCATABLE on riscv32
asm-generic: Always define Elf_Rel and Elf_Rela
riscv: Support CONFIG_RELOCATABLE on NOMMU
riscv: Allow NOMMU kernels to access all of RAM
riscv: Remove duplicate CONFIG_PAGE_OFFSET definition
RISC-V: errata: Use medany for relocatable builds
dt-bindings: riscv: document vector crypto requirements
dt-bindings: riscv: add vector sub-extension dependencies
dt-bindings: riscv: d requires f
RISC-V: add f & d extension validation checks
RISC-V: add vector crypto extension validation checks
...
|
|
|
|
Add a "-l <latency>" param to the rseq test so that the user can override
/dev/cpu_dma_latency, as described by the test's suggested workaround for
not being able to complete enough migrations.
cpu_dma_latency is not a normal file, even as far as procfs files go.
Writes to cpu_dma_latency only persist so long as the file is open, e.g.
so that the kernel automatically reverts back to a power-optimized state
once the sensitive workload completes. Provide the necessary functionality
instead of effectively forcing the user to write a non-obvious wrapper.
Cc: Dongsheng Zhang <dongsheng.x.zhang@intel.com>
Cc: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250401142238.819487-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Several tests cover infrastructure from virt/kvm/ and userspace APIs that have
only minimal requirements from architecture-specific code. As such, they are
available on all architectures that have libkvm support, and this presumably
will apply also in the future (for example if loongarch gets selftests support).
Put them in a separate variable and list them only once.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250401141327.785520-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250331221851.614582-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Run each testcase in a separate VMs to cover more possibilities;
move WRMSR close to MONITOR/MWAIT to test updating CPUID bits
while in the VM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.15
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU implementations
where a VM may run, addressing a longstanding issue of guest CPU
errata awareness in big-little systems and cross-implementation VM
migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
|
|
KVM/riscv changes for 6.15
- Disable the kernel perf counter during configure
- KVM selftests improvements for PMU
- Fix warning at the time of KVM module removal
|
|
* kvm-arm64/writable-midr:
: Writable implementation ID registers, courtesy of Sebastian Ott
:
: Introduce a new capability that allows userspace to set the
: ID registers that identify a CPU implementation: MIDR_EL1, REVIDR_EL1,
: and AIDR_EL1. Also plug a hole in KVM's trap configuration where
: SMIDR_EL1 was readable at EL1, despite the fact that KVM does not
: support SME.
KVM: arm64: Fix documentation for KVM_CAP_ARM_WRITABLE_IMP_ID_REGS
KVM: arm64: Copy MIDR_EL1 into hyp VM when it is writable
KVM: arm64: Copy guest CTR_EL0 into hyp VM
KVM: selftests: arm64: Test writes to MIDR,REVIDR,AIDR
KVM: arm64: Allow userspace to change the implementation ID registers
KVM: arm64: Load VPIDR_EL2 with the VM's MIDR_EL1 value
KVM: arm64: Maintain per-VM copy of implementation ID regs
KVM: arm64: Set HCR_EL2.TID1 unconditionally
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/pv-cpuid:
: Paravirtualized implementation ID, courtesy of Shameer Kolothum
:
: Big-little has historically been a pain in the ass to virtualize. The
: implementation ID (MIDR, REVIDR, AIDR) of a vCPU can change at the whim
: of vCPU scheduling. This can be particularly annoying when the guest
: needs to know the underlying implementation to mitigate errata.
:
: "Hyperscalers" face a similar scheduling problem, where VMs may freely
: migrate between hosts in a pool of heterogenous hardware. And yes, our
: server-class friends are equally riddled with errata too.
:
: In absence of an architected solution to this wart on the ecosystem,
: introduce support for paravirtualizing the implementation exposed
: to a VM, allowing the VMM to describe the pool of implementations that a
: VM may be exposed to due to scheduling/migration.
:
: Userspace is expected to intercept and handle these hypercalls using the
: SMCCC filter UAPI, should it choose to do so.
smccc: kvm_guest: Fix kernel builds for 32 bit arm
KVM: selftests: Add test for KVM_REG_ARM_VENDOR_HYP_BMAP_2
smccc/kvm_guest: Enable errata based on implementation CPUs
arm64: Make _midr_in_range_list() an exported function
KVM: arm64: Introduce KVM_REG_ARM_VENDOR_HYP_BMAP_2
KVM: arm64: Specify hypercall ABI for retrieving target implementations
arm64: Modify _midr_range() functions to read MIDR/REVIDR internally
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
