1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
|
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/rohm,bd96802-pmic.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: ROHM BD96802 / BD96806 Scalable Power Management Integrated Circuit
maintainers:
- Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
description: |
BD96802Qxx-C and BD96806 are automotive grade configurable Power Management
Integrated Circuits supporting Functional Safety features for application
processors, SoCs and FPGAs
properties:
compatible:
enum:
- rohm,bd96802
- rohm,bd96806
reg:
maxItems: 1
interrupts:
description:
The PMIC provides intb and errb IRQ lines. The errb IRQ line is used
for fatal IRQs which will cause the PMIC to shut down power outputs.
In many systems this will shut down the SoC contolling the PMIC and
connecting/handling the errb can be omitted. However, there are cases
where the SoC is not powered by the PMIC or has a short time backup
energy to handle shutdown of critical hardware. In that case it may be
useful to connect the errb and handle errb events.
minItems: 1
maxItems: 2
interrupt-names:
minItems: 1
items:
- enum: [intb, errb]
- const: errb
regulators:
$ref: ../regulator/rohm,bd96802-regulator.yaml
description:
List of child nodes that specify the regulators.
required:
- compatible
- reg
- interrupts
- interrupt-names
- regulators
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/leds/common.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
pmic: pmic@62 {
reg = <0x62>;
compatible = "rohm,bd96802";
interrupt-parent = <&gpio1>;
interrupts = <29 IRQ_TYPE_LEVEL_LOW>, <6 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "intb", "errb";
regulators {
buck1 {
regulator-name = "buck1";
regulator-ramp-delay = <1250>;
/* 0.5V min INITIAL - 150 mV tune */
regulator-min-microvolt = <350000>;
/* 3.3V + 150mV tune */
regulator-max-microvolt = <3450000>;
/* These can be set only when PMIC is in STBY */
rohm,initial-voltage-microvolt = <500000>;
regulator-ov-error-microvolt = <230000>;
regulator-uv-error-microvolt = <230000>;
regulator-temp-protection-kelvin = <1>;
regulator-temp-warn-kelvin = <0>;
};
buck2 {
regulator-name = "buck2";
regulator-min-microvolt = <350000>;
regulator-max-microvolt = <3450000>;
rohm,initial-voltage-microvolt = <3000000>;
regulator-ov-error-microvolt = <18000>;
regulator-uv-error-microvolt = <18000>;
regulator-temp-protection-kelvin = <1>;
regulator-temp-warn-kelvin = <1>;
};
};
};
};
|
