6547 files changed, 693499 insertions, 517732 deletions

diff --git a/arch/arm/Kbuild b/arch/arm/Kbuild
new file mode 100644
index 000000000000..69de6b6243c7
--- /dev/null
+++ b/arch/arm/Kbuild
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_FPE_NWFPE)		+= nwfpe/
+# Put arch/arm/fastfpe/ to use this.
+obj-$(CONFIG_FPE_FASTFPE)	+= $(patsubst $(src)/%,%,$(wildcard $(src)/fastfpe/))
+obj-$(CONFIG_VFP)		+= vfp/
+obj-$(CONFIG_XEN)		+= xen/
+obj-$(CONFIG_VDSO)		+= vdso/
+obj-y				+= kernel/ mm/ common/
+obj-y				+= probes/
+obj-y				+= net/
+obj-y				+= crypto/
+
+# for cleaning
+subdir- += boot
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a208bfe367b5..ff61891abe53 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1,73 +1,119 @@
+# SPDX-License-Identifier: GPL-2.0
 config ARM
 	bool
 	default y
-	select ARCH_CLOCKSOURCE_DATA
-	select ARCH_HAS_DEBUG_VIRTUAL
-	select ARCH_HAS_DEVMEM_IS_ALLOWED
+	select ARCH_32BIT_OFF_T
+	select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE if HAVE_KRETPROBES && FRAME_POINTER && !ARM_UNWIND
+	select ARCH_HAS_BINFMT_FLAT
+	select ARCH_HAS_CACHE_LINE_SIZE if OF
+	select ARCH_HAS_CPU_CACHE_ALIASING
+	select ARCH_HAS_CPU_FINALIZE_INIT if MMU
+	select ARCH_HAS_CURRENT_STACK_POINTER
+	select ARCH_HAS_DEBUG_VIRTUAL if MMU
+	select ARCH_HAS_DMA_ALLOC if MMU
+	select ARCH_HAS_DMA_OPS
+	select ARCH_HAS_DMA_WRITE_COMBINE if !ARM_DMA_MEM_BUFFERABLE
 	select ARCH_HAS_ELF_RANDOMIZE
+	select ARCH_HAS_FORTIFY_SOURCE
+	select ARCH_HAS_KEEPINITRD
+	select ARCH_HAS_KCOV
+	select ARCH_HAS_MEMBARRIER_SYNC_CORE
+	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
+	select ARCH_HAS_PTE_SPECIAL if ARM_LPAE
+	select ARCH_HAS_SETUP_DMA_OPS
 	select ARCH_HAS_SET_MEMORY
+	select ARCH_STACKWALK
 	select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL
 	select ARCH_HAS_STRICT_MODULE_RWX if MMU
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
+	select ARCH_HAS_TEARDOWN_DMA_OPS if MMU
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
-	select ARCH_HAVE_CUSTOM_GPIO_H
+	select ARCH_HAVE_NMI_SAFE_CMPXCHG if CPU_V7 || CPU_V7M || CPU_V6K
 	select ARCH_HAS_GCOV_PROFILE_ALL
+	select ARCH_KEEP_MEMBLOCK
+	select ARCH_HAS_UBSAN
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
 	select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7
+	select ARCH_NEED_CMPXCHG_1_EMU if CPU_V6
 	select ARCH_SUPPORTS_ATOMIC_RMW
+	select ARCH_SUPPORTS_CFI
+	select ARCH_SUPPORTS_HUGETLBFS if ARM_LPAE
+	select ARCH_SUPPORTS_PER_VMA_LOCK
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF
+	select ARCH_USE_MEMTEST
+	# https://github.com/llvm/llvm-project/commit/d130f402642fba3d065aacb506cb061c899558de
+	select ARCH_USES_CFI_GENERIC_LLVM_PASS if CLANG_VERSION < 220000
+	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
+	select ARCH_WANT_GENERAL_HUGETLB
 	select ARCH_WANT_IPC_PARSE_VERSION
-	select BUILDTIME_EXTABLE_SORT if MMU
+	select ARCH_WANT_LD_ORPHAN_WARN
+	select BINFMT_FLAT_ARGVP_ENVP_ON_STACK
+	select BUILDTIME_TABLE_SORT if MMU
+	select COMMON_CLK if !(ARCH_RPC || ARCH_FOOTBRIDGE)
 	select CLONE_BACKWARDS
-	select CPU_PM if (SUSPEND || CPU_IDLE)
+	select CPU_PM if SUSPEND || CPU_IDLE
 	select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
-	select DMA_NOOP_OPS if !MMU
+	select DMA_DECLARE_COHERENT
+	select DMA_GLOBAL_POOL if !MMU
+	select DMA_NONCOHERENT_MMAP if MMU
 	select EDAC_SUPPORT
 	select EDAC_ATOMIC_SCRUB
 	select GENERIC_ALLOCATOR
 	select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY
-	select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI)
+	select GENERIC_ATOMIC64 if CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+	select GENERIC_IRQ_IPI if SMP
 	select GENERIC_CPU_AUTOPROBE
+	select GENERIC_CPU_DEVICES
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_IDLE_POLL_SETUP
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
+	select GENERIC_LIB_DEVMEM_IS_ALLOWED
 	select GENERIC_PCI_IOMAP
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
-	select GENERIC_STRNCPY_FROM_USER
-	select GENERIC_STRNLEN_USER
-	select HANDLE_DOMAIN_IRQ
 	select HARDIRQS_SW_RESEND
-	select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT)
+	select HAS_IOPORT
+	select HAVE_ARCH_AUDITSYSCALL if AEABI && !OABI_COMPAT
 	select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
 	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
+	select HAVE_ARCH_KFENCE if MMU && !XIP_KERNEL
 	select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
+	select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL
+	select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN
+	select HAVE_ARCH_KSTACK_ERASE
 	select HAVE_ARCH_MMAP_RND_BITS if MMU
-	select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
+	select HAVE_ARCH_PFN_VALID
+	select HAVE_ARCH_SECCOMP
+	select HAVE_ARCH_SECCOMP_FILTER if AEABI && !OABI_COMPAT
+	select HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if ARM_LPAE
 	select HAVE_ARM_SMCCC if CPU_V7
-	select HAVE_CBPF_JIT
-	select HAVE_CC_STACKPROTECTOR
-	select HAVE_CONTEXT_TRACKING
+	select HAVE_EBPF_JIT if !CPU_ENDIAN_BE32
+	select HAVE_CONTEXT_TRACKING_USER
 	select HAVE_C_RECORDMCOUNT
-	select HAVE_DEBUG_KMEMLEAK
-	select HAVE_DMA_API_DEBUG
+	select HAVE_BUILDTIME_MCOUNT_SORT
+	select HAVE_DEBUG_KMEMLEAK if !XIP_KERNEL
 	select HAVE_DMA_CONTIGUOUS if MMU
-	select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32 && MMU
+	select HAVE_EXTRA_IPI_TRACEPOINTS
+	select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
 	select HAVE_EXIT_THREAD
-	select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
-	select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
-	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
+	select HAVE_GUP_FAST if ARM_LPAE
+	select HAVE_FUNCTION_ERROR_INJECTION
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_GRAPH_FREGS
+	select HAVE_FUNCTION_TRACER if !XIP_KERNEL
 	select HAVE_GCC_PLUGINS
-	select HAVE_GENERIC_DMA_COHERENT
-	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
-	select HAVE_IDE if PCI || ISA || PCMCIA
+	select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)
 	select HAVE_IRQ_TIME_ACCOUNTING
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZ4
@@ -75,30 +121,43 @@ config ARM
 	select HAVE_KERNEL_LZO
 	select HAVE_KERNEL_XZ
 	select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M
-	select HAVE_KRETPROBES if (HAVE_KPROBES)
-	select HAVE_MEMBLOCK
+	select HAVE_KRETPROBES if HAVE_KPROBES
+	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION if (LD_VERSION >= 23600 || LD_IS_LLD) && LD_CAN_USE_KEEP_IN_OVERLAY
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI
-	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
 	select HAVE_OPTPROBES if !THUMB2_KERNEL
+	select HAVE_PAGE_SIZE_4KB
+	select HAVE_PCI if MMU
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
-	select HAVE_RCU_TABLE_FREE if (SMP && ARM_LPAE)
+	select MMU_GATHER_RCU_TABLE_FREE if SMP && ARM_LPAE
 	select HAVE_REGS_AND_STACK_ACCESS_API
+	select HAVE_RSEQ
+	select HAVE_RUST if CPU_LITTLE_ENDIAN && CPU_32v7
+	select HAVE_STACKPROTECTOR
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16
 	select HAVE_VIRT_CPU_ACCOUNTING_GEN
+	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
 	select IRQ_FORCED_THREADING
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_REL
-	select NO_BOOTMEM
+	select NEED_DMA_MAP_STATE
 	select OF_EARLY_FLATTREE if OF
-	select OF_RESERVED_MEM if OF
 	select OLD_SIGACTION
 	select OLD_SIGSUSPEND3
+	select PCI_DOMAINS_GENERIC if PCI
+	select PCI_SYSCALL if PCI
 	select PERF_USE_VMALLOC
 	select RTC_LIB
+	select SPARSE_IRQ if !(ARCH_FOOTBRIDGE || ARCH_RPC)
 	select SYS_SUPPORTS_APM_EMULATION
+	select THREAD_INFO_IN_TASK
+	select TIMER_OF if OF
+	select HAVE_ARCH_VMAP_STACK if MMU && ARM_HAS_GROUP_RELOCS
+	select TRACE_IRQFLAGS_SUPPORT if !CPU_V7M
+	select USE_OF if !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	# Above selects are sorted alphabetically; please add new ones
 	# according to that.  Thanks.
 	help
@@ -109,16 +168,16 @@ config ARM
 	  Europe.  There is an ARM Linux project with a web page at
 	  <http://www.arm.linux.org.uk/>.
 
-config ARM_HAS_SG_CHAIN
-	select ARCH_HAS_SG_CHAIN
-	bool
-
-config NEED_SG_DMA_LENGTH
-	bool
+config ARM_HAS_GROUP_RELOCS
+	def_bool !COMPILE_TEST
+	help
+	  Whether or not to use R_ARM_ALU_PC_Gn or R_ARM_LDR_PC_Gn group
+	  relocations. The combined range is -/+ 256 MiB, which is usually
+	  sufficient, but not for allyesconfig, so we disable this feature
+	  when doing compile testing.
 
 config ARM_DMA_USE_IOMMU
 	bool
-	select ARM_HAS_SG_CHAIN
 	select NEED_SG_DMA_LENGTH
 
 if ARM_DMA_USE_IOMMU
@@ -142,9 +201,6 @@ config ARM_DMA_IOMMU_ALIGNMENT
 
 endif
 
-config MIGHT_HAVE_PCI
-	bool
-
 config SYS_SUPPORTS_APM_EMULATION
 	bool
 
@@ -158,21 +214,6 @@ config HAVE_PROC_CPU
 config NO_IOPORT_MAP
 	bool
 
-config EISA
-	bool
-	---help---
-	  The Extended Industry Standard Architecture (EISA) bus was
-	  developed as an open alternative to the IBM MicroChannel bus.
-
-	  The EISA bus provided some of the features of the IBM MicroChannel
-	  bus while maintaining backward compatibility with cards made for
-	  the older ISA bus.  The EISA bus saw limited use between 1988 and
-	  1995 when it was made obsolete by the PCI bus.
-
-	  Say Y here if you are building a kernel for an EISA-based machine.
-
-	  Otherwise, say N.
-
 config SBUS
 	bool
 
@@ -184,14 +225,6 @@ config LOCKDEP_SUPPORT
 	bool
 	default y
 
-config TRACE_IRQFLAGS_SUPPORT
-	bool
-	default !CPU_V7M
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-	default y
-
 config ARCH_HAS_ILOG2_U32
 	bool
 
@@ -215,50 +248,29 @@ config GENERIC_CALIBRATE_DELAY
 config ARCH_MAY_HAVE_PC_FDC
 	bool
 
-config ZONE_DMA
-	bool
-
-config NEED_DMA_MAP_STATE
-       def_bool y
-
 config ARCH_SUPPORTS_UPROBES
 	def_bool y
 
-config ARCH_HAS_DMA_SET_COHERENT_MASK
-	bool
-
 config GENERIC_ISA_DMA
 	bool
 
 config FIQ
 	bool
 
-config NEED_RET_TO_USER
-	bool
-
 config ARCH_MTD_XIP
 	bool
 
-config VECTORS_BASE
-	hex
-	default 0xffff0000 if MMU || CPU_HIGH_VECTOR
-	default DRAM_BASE if REMAP_VECTORS_TO_RAM
-	default 0x00000000
-	help
-	  The base address of exception vectors.  This must be two pages
-	  in size.
-
 config ARM_PATCH_PHYS_VIRT
-	bool "Patch physical to virtual translations at runtime" if EMBEDDED
+	bool "Patch physical to virtual translations at runtime" if !ARCH_MULTIPLATFORM
 	default y
-	depends on !XIP_KERNEL && MMU
+	depends on MMU
 	help
 	  Patch phys-to-virt and virt-to-phys translation functions at
 	  boot and module load time according to the position of the
 	  kernel in system memory.
 
 	  This can only be used with non-XIP MMU kernels where the base
-	  of physical memory is at a 16MB boundary.
+	  of physical memory is at a 2 MiB boundary.
 
 	  Only disable this option if you know that you do not require
 	  this feature (eg, building a kernel for a single machine) and
@@ -280,17 +292,13 @@ config NEED_MACH_MEMORY_H
 
 config PHYS_OFFSET
 	hex "Physical address of main memory" if MMU
-	depends on !ARM_PATCH_PHYS_VIRT
+	depends on !ARM_PATCH_PHYS_VIRT || !AUTO_ZRELADDR
 	default DRAM_BASE if !MMU
-	default 0x00000000 if ARCH_EBSA110 || \
-			ARCH_FOOTBRIDGE || \
-			ARCH_INTEGRATOR || \
-			ARCH_IOP13XX || \
-			ARCH_KS8695 || \
-			ARCH_REALVIEW
+	default 0x00000000 if ARCH_FOOTBRIDGE
 	default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
-	default 0x20000000 if ARCH_S5PV210
-	default 0xc0000000 if ARCH_SA1100
+	default 0xa0000000 if ARCH_PXA
+	default 0xc0000000 if ARCH_EP93XX || ARCH_SA1100
+	default 0
 	help
 	  Please provide the physical address corresponding to the
 	  location of main memory in your system.
@@ -304,10 +312,6 @@ config PGTABLE_LEVELS
 	default 3 if ARM_LPAE
 	default 2
 
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
 menu "System Type"
 
 config MMU
@@ -317,6 +321,12 @@ config MMU
 	  Select if you want MMU-based virtualised addressing space
 	  support by paged memory management. If unsure, say 'Y'.
 
+config ARM_SINGLE_ARMV7M
+	def_bool !MMU
+	select ARM_NVIC
+	select CPU_V7M
+	select NO_IOPORT_MAP
+
 config ARCH_MMAP_RND_BITS_MIN
 	default 8
 
@@ -325,402 +335,35 @@ config ARCH_MMAP_RND_BITS_MAX
 	default 15 if PAGE_OFFSET=0x80000000
 	default 16
 
-#
-# The "ARM system type" choice list is ordered alphabetically by option
-# text.  Please add new entries in the option alphabetic order.
-#
-choice
-	prompt "ARM system type"
-	default ARM_SINGLE_ARMV7M if !MMU
-	default ARCH_MULTIPLATFORM if MMU
-
 config ARCH_MULTIPLATFORM
-	bool "Allow multiple platforms to be selected"
-	depends on MMU
-	select ARM_HAS_SG_CHAIN
-	select ARM_PATCH_PHYS_VIRT
-	select AUTO_ZRELADDR
-	select TIMER_OF
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
-	select MIGHT_HAVE_PCI
-	select MULTI_IRQ_HANDLER
-	select PCI_DOMAINS if PCI
-	select SPARSE_IRQ
-	select USE_OF
-
-config ARM_SINGLE_ARMV7M
-	bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
-	depends on !MMU
-	select ARM_NVIC
-	select AUTO_ZRELADDR
-	select TIMER_OF
-	select COMMON_CLK
-	select CPU_V7M
-	select GENERIC_CLOCKEVENTS
-	select NO_IOPORT_MAP
-	select SPARSE_IRQ
-	select USE_OF
-
-config ARCH_EBSA110
-	bool "EBSA-110"
-	select ARCH_USES_GETTIMEOFFSET
-	select CPU_SA110
-	select ISA
-	select NEED_MACH_IO_H
-	select NEED_MACH_MEMORY_H
-	select NO_IOPORT_MAP
-	help
-	  This is an evaluation board for the StrongARM processor available
-	  from Digital. It has limited hardware on-board, including an
-	  Ethernet interface, two PCMCIA sockets, two serial ports and a
-	  parallel port.
-
-config ARCH_EP93XX
-	bool "EP93xx-based"
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARM_AMBA
-	select ARM_PATCH_PHYS_VIRT
-	select ARM_VIC
-	select AUTO_ZRELADDR
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select CPU_ARM920T
-	select GENERIC_CLOCKEVENTS
-	select GPIOLIB
-	help
-	  This enables support for the Cirrus EP93xx series of CPUs.
-
-config ARCH_FOOTBRIDGE
-	bool "FootBridge"
-	select CPU_SA110
-	select FOOTBRIDGE
-	select GENERIC_CLOCKEVENTS
-	select HAVE_IDE
-	select NEED_MACH_IO_H if !MMU
-	select NEED_MACH_MEMORY_H
-	help
-	  Support for systems based on the DC21285 companion chip
-	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
-
-config ARCH_NETX
-	bool "Hilscher NetX based"
-	select ARM_VIC
-	select CLKSRC_MMIO
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	help
-	  This enables support for systems based on the Hilscher NetX Soc
-
-config ARCH_IOP13XX
-	bool "IOP13xx-based"
-	depends on MMU
-	select CPU_XSC3
-	select NEED_MACH_MEMORY_H
-	select NEED_RET_TO_USER
-	select PCI
-	select PLAT_IOP
-	select VMSPLIT_1G
-	select SPARSE_IRQ
-	help
-	  Support for Intel's IOP13XX (XScale) family of processors.
-
-config ARCH_IOP32X
-	bool "IOP32x-based"
-	depends on MMU
-	select CPU_XSCALE
-	select GPIO_IOP
-	select GPIOLIB
-	select NEED_RET_TO_USER
-	select PCI
-	select PLAT_IOP
-	help
-	  Support for Intel's 80219 and IOP32X (XScale) family of
-	  processors.
-
-config ARCH_IOP33X
-	bool "IOP33x-based"
-	depends on MMU
-	select CPU_XSCALE
-	select GPIO_IOP
-	select GPIOLIB
-	select NEED_RET_TO_USER
-	select PCI
-	select PLAT_IOP
-	help
-	  Support for Intel's IOP33X (XScale) family of processors.
-
-config ARCH_IXP4XX
-	bool "IXP4xx-based"
-	depends on MMU
-	select ARCH_HAS_DMA_SET_COHERENT_MASK
-	select ARCH_SUPPORTS_BIG_ENDIAN
-	select CLKSRC_MMIO
-	select CPU_XSCALE
-	select DMABOUNCE if PCI
-	select GENERIC_CLOCKEVENTS
-	select GPIOLIB
-	select MIGHT_HAVE_PCI
-	select NEED_MACH_IO_H
-	select USB_EHCI_BIG_ENDIAN_DESC
-	select USB_EHCI_BIG_ENDIAN_MMIO
-	help
-	  Support for Intel's IXP4XX (XScale) family of processors.
-
-config ARCH_DOVE
-	bool "Marvell Dove"
-	select CPU_PJ4
-	select GENERIC_CLOCKEVENTS
-	select GPIOLIB
-	select MIGHT_HAVE_PCI
-	select MULTI_IRQ_HANDLER
-	select MVEBU_MBUS
-	select PINCTRL
-	select PINCTRL_DOVE
-	select PLAT_ORION_LEGACY
-	select SPARSE_IRQ
-	select PM_GENERIC_DOMAINS if PM
-	help
-	  Support for the Marvell Dove SoC 88AP510
-
-config ARCH_KS8695
-	bool "Micrel/Kendin KS8695"
-	select CLKSRC_MMIO
-	select CPU_ARM922T
-	select GENERIC_CLOCKEVENTS
-	select GPIOLIB
-	select NEED_MACH_MEMORY_H
-	help
-	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
-	  System-on-Chip devices.
-
-config ARCH_W90X900
-	bool "Nuvoton W90X900 CPU"
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select GPIOLIB
-	help
-	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
-	  At present, the w90x900 has been renamed nuc900, regarding
-	  the ARM series product line, you can login the following
-	  link address to know more.
-
-	  <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
-		ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
-
-config ARCH_LPC32XX
-	bool "NXP LPC32XX"
-	select ARM_AMBA
-	select CLKDEV_LOOKUP
-	select CLKSRC_LPC32XX
-	select COMMON_CLK
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select GPIOLIB
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
-	select USE_OF
-	help
-	  Support for the NXP LPC32XX family of processors
-
-config ARCH_PXA
-	bool "PXA2xx/PXA3xx-based"
-	depends on MMU
-	select ARCH_MTD_XIP
-	select ARM_CPU_SUSPEND if PM
-	select AUTO_ZRELADDR
-	select COMMON_CLK
-	select CLKDEV_LOOKUP
-	select CLKSRC_PXA
-	select CLKSRC_MMIO
-	select TIMER_OF
-	select CPU_XSCALE if !CPU_XSC3
-	select GENERIC_CLOCKEVENTS
-	select GPIO_PXA
-	select GPIOLIB
-	select HAVE_IDE
-	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
-	select PLAT_PXA
-	select SPARSE_IRQ
-	help
-	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
-
-config ARCH_RPC
-	bool "RiscPC"
-	depends on MMU
-	select ARCH_ACORN
-	select ARCH_MAY_HAVE_PC_FDC
-	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_USES_GETTIMEOFFSET
-	select CPU_SA110
-	select FIQ
-	select HAVE_IDE
-	select HAVE_PATA_PLATFORM
-	select ISA_DMA_API
-	select NEED_MACH_IO_H
-	select NEED_MACH_MEMORY_H
-	select NO_IOPORT_MAP
-	help
-	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
-	  CD-ROM interface, serial and parallel port, and the floppy drive.
-
-config ARCH_SA1100
-	bool "SA1100-based"
-	select ARCH_MTD_XIP
-	select ARCH_SPARSEMEM_ENABLE
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select CLKSRC_PXA
-	select TIMER_OF if OF
-	select CPU_FREQ
-	select CPU_SA1100
-	select GENERIC_CLOCKEVENTS
-	select GPIOLIB
-	select HAVE_IDE
-	select IRQ_DOMAIN
-	select ISA
-	select MULTI_IRQ_HANDLER
-	select NEED_MACH_MEMORY_H
-	select SPARSE_IRQ
-	help
-	  Support for StrongARM 11x0 based boards.
-
-config ARCH_S3C24XX
-	bool "Samsung S3C24XX SoCs"
-	select ATAGS
-	select CLKDEV_LOOKUP
-	select CLKSRC_SAMSUNG_PWM
-	select GENERIC_CLOCKEVENTS
-	select GPIO_SAMSUNG
-	select GPIOLIB
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	select HAVE_S3C_RTC if RTC_CLASS
-	select MULTI_IRQ_HANDLER
-	select NEED_MACH_IO_H
-	select SAMSUNG_ATAGS
-	help
-	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
-	  and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
-	  (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
-	  Samsung SMDK2410 development board (and derivatives).
-
-config ARCH_DAVINCI
-	bool "TI DaVinci"
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	select CLKDEV_LOOKUP
-	select CPU_ARM926T
-	select GENERIC_ALLOCATOR
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_IRQ_CHIP
-	select GPIOLIB
-	select HAVE_IDE
-	select USE_OF
-	select ZONE_DMA
-	help
-	  Support for TI's DaVinci platform.
-
-config ARCH_OMAP1
-	bool "TI OMAP1"
-	depends on MMU
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_OMAP
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_IRQ_CHIP
-	select GPIOLIB
-	select HAVE_IDE
-	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
-	select NEED_MACH_IO_H if PCCARD
-	select NEED_MACH_MEMORY_H
-	select SPARSE_IRQ
-	help
-	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
-
-endchoice
-
-menu "Multiple platform selection"
-	depends on ARCH_MULTIPLATFORM
-
-comment "CPU Core family selection"
-
-config ARCH_MULTI_V4
-	bool "ARMv4 based platforms (FA526)"
-	depends on !ARCH_MULTI_V6_V7
-	select ARCH_MULTI_V4_V5
-	select CPU_FA526
-
-config ARCH_MULTI_V4T
-	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
-	depends on !ARCH_MULTI_V6_V7
-	select ARCH_MULTI_V4_V5
-	select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
-		CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
-		CPU_ARM925T || CPU_ARM940T)
-
-config ARCH_MULTI_V5
-	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
-	depends on !ARCH_MULTI_V6_V7
-	select ARCH_MULTI_V4_V5
-	select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
-		CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
-		CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
-
-config ARCH_MULTI_V4_V5
-	bool
-
-config ARCH_MULTI_V6
-	bool "ARMv6 based platforms (ARM11)"
-	select ARCH_MULTI_V6_V7
-	select CPU_V6K
-
-config ARCH_MULTI_V7
-	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
+	bool "Require kernel to be portable to multiple machines" if EXPERT
+	depends on MMU && !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	default y
-	select ARCH_MULTI_V6_V7
-	select CPU_V7
-	select HAVE_SMP
+	help
+	  In general, all Arm machines can be supported in a single
+	  kernel image, covering either Armv4/v5 or Armv6/v7.
 
-config ARCH_MULTI_V6_V7
-	bool
-	select MIGHT_HAVE_CACHE_L2X0
+	  However, some configuration options require hardcoding machine
+	  specific physical addresses or enable errata workarounds that may
+	  break other machines.
 
-config ARCH_MULTI_CPU_AUTO
-	def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
-	select ARCH_MULTI_V5
+	  Selecting N here allows using those options, including
+	  DEBUG_UNCOMPRESS, XIP_KERNEL and ZBOOT_ROM. If unsure, say Y.
 
-endmenu
-
-config ARCH_VIRT
-	bool "Dummy Virtual Machine"
-	depends on ARCH_MULTI_V7
-	select ARM_AMBA
-	select ARM_GIC
-	select ARM_GIC_V2M if PCI
-	select ARM_GIC_V3
-	select ARM_GIC_V3_ITS if PCI
-	select ARM_PSCI
-	select HAVE_ARM_ARCH_TIMER
+source "arch/arm/Kconfig.platforms"
 
 #
 # This is sorted alphabetically by mach-* pathname.  However, plat-*
 # Kconfigs may be included either alphabetically (according to the
 # plat- suffix) or along side the corresponding mach-* source.
 #
-source "arch/arm/mach-mvebu/Kconfig"
-
 source "arch/arm/mach-actions/Kconfig"
 
 source "arch/arm/mach-alpine/Kconfig"
 
 source "arch/arm/mach-artpec/Kconfig"
 
-source "arch/arm/mach-asm9260/Kconfig"
+source "arch/arm/mach-aspeed/Kconfig"
 
 source "arch/arm/mach-at91/Kconfig"
 
@@ -732,8 +375,6 @@ source "arch/arm/mach-berlin/Kconfig"
 
 source "arch/arm/mach-clps711x/Kconfig"
 
-source "arch/arm/mach-cns3xxx/Kconfig"
-
 source "arch/arm/mach-davinci/Kconfig"
 
 source "arch/arm/mach-digicolor/Kconfig"
@@ -742,6 +383,8 @@ source "arch/arm/mach-dove/Kconfig"
 
 source "arch/arm/mach-ep93xx/Kconfig"
 
+source "arch/arm/mach-exynos/Kconfig"
+
 source "arch/arm/mach-footbridge/Kconfig"
 
 source "arch/arm/mach-gemini/Kconfig"
@@ -750,41 +393,33 @@ source "arch/arm/mach-highbank/Kconfig"
 
 source "arch/arm/mach-hisi/Kconfig"
 
-source "arch/arm/mach-integrator/Kconfig"
-
-source "arch/arm/mach-iop32x/Kconfig"
-
-source "arch/arm/mach-iop33x/Kconfig"
-
-source "arch/arm/mach-iop13xx/Kconfig"
+source "arch/arm/mach-imx/Kconfig"
 
 source "arch/arm/mach-ixp4xx/Kconfig"
 
 source "arch/arm/mach-keystone/Kconfig"
 
-source "arch/arm/mach-ks8695/Kconfig"
+source "arch/arm/mach-lpc32xx/Kconfig"
+
+source "arch/arm/mach-mediatek/Kconfig"
 
 source "arch/arm/mach-meson/Kconfig"
 
-source "arch/arm/mach-moxart/Kconfig"
+source "arch/arm/mach-milbeaut/Kconfig"
 
-source "arch/arm/mach-aspeed/Kconfig"
+source "arch/arm/mach-mmp/Kconfig"
 
-source "arch/arm/mach-mv78xx0/Kconfig"
+source "arch/arm/mach-mstar/Kconfig"
 
-source "arch/arm/mach-imx/Kconfig"
+source "arch/arm/mach-mv78xx0/Kconfig"
 
-source "arch/arm/mach-mediatek/Kconfig"
+source "arch/arm/mach-mvebu/Kconfig"
 
 source "arch/arm/mach-mxs/Kconfig"
 
-source "arch/arm/mach-netx/Kconfig"
-
 source "arch/arm/mach-nomadik/Kconfig"
 
-source "arch/arm/mach-nspire/Kconfig"
-
-source "arch/arm/plat-omap/Kconfig"
+source "arch/arm/mach-npcm/Kconfig"
 
 source "arch/arm/mach-omap1/Kconfig"
 
@@ -792,23 +427,24 @@ source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
-source "arch/arm/mach-picoxcell/Kconfig"
-
 source "arch/arm/mach-pxa/Kconfig"
-source "arch/arm/plat-pxa/Kconfig"
-
-source "arch/arm/mach-mmp/Kconfig"
-
-source "arch/arm/mach-oxnas/Kconfig"
 
 source "arch/arm/mach-qcom/Kconfig"
 
-source "arch/arm/mach-realview/Kconfig"
+source "arch/arm/mach-realtek/Kconfig"
+
+source "arch/arm/mach-rpc/Kconfig"
 
 source "arch/arm/mach-rockchip/Kconfig"
 
+source "arch/arm/mach-s3c/Kconfig"
+
+source "arch/arm/mach-s5pv210/Kconfig"
+
 source "arch/arm/mach-sa1100/Kconfig"
 
+source "arch/arm/mach-shmobile/Kconfig"
+
 source "arch/arm/mach-socfpga/Kconfig"
 
 source "arch/arm/mach-spear/Kconfig"
@@ -817,53 +453,19 @@ source "arch/arm/mach-sti/Kconfig"
 
 source "arch/arm/mach-stm32/Kconfig"
 
-source "arch/arm/mach-s3c24xx/Kconfig"
-
-source "arch/arm/mach-s3c64xx/Kconfig"
-
-source "arch/arm/mach-s5pv210/Kconfig"
-
-source "arch/arm/mach-exynos/Kconfig"
-source "arch/arm/plat-samsung/Kconfig"
-
-source "arch/arm/mach-shmobile/Kconfig"
-
 source "arch/arm/mach-sunxi/Kconfig"
 
-source "arch/arm/mach-prima2/Kconfig"
-
-source "arch/arm/mach-tango/Kconfig"
-
 source "arch/arm/mach-tegra/Kconfig"
 
-source "arch/arm/mach-u300/Kconfig"
-
-source "arch/arm/mach-uniphier/Kconfig"
-
 source "arch/arm/mach-ux500/Kconfig"
 
 source "arch/arm/mach-versatile/Kconfig"
 
-source "arch/arm/mach-vexpress/Kconfig"
-source "arch/arm/plat-versatile/Kconfig"
-
 source "arch/arm/mach-vt8500/Kconfig"
 
-source "arch/arm/mach-w90x900/Kconfig"
-
-source "arch/arm/mach-zx/Kconfig"
-
 source "arch/arm/mach-zynq/Kconfig"
 
 # ARMv7-M architecture
-config ARCH_EFM32
-	bool "Energy Micro efm32"
-	depends on ARM_SINGLE_ARMV7M
-	select GPIOLIB
-	help
-	  Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
-	  processors.
-
 config ARCH_LPC18XX
 	bool "NXP LPC18xx/LPC43xx"
 	depends on ARM_SINGLE_ARMV7M
@@ -891,14 +493,9 @@ config ARCH_MPS2
 config ARCH_ACORN
 	bool
 
-config PLAT_IOP
-	bool
-	select GENERIC_CLOCKEVENTS
-
 config PLAT_ORION
 	bool
 	select CLKSRC_MMIO
-	select COMMON_CLK
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
 
@@ -906,29 +503,19 @@ config PLAT_ORION_LEGACY
 	bool
 	select PLAT_ORION
 
-config PLAT_PXA
-	bool
-
 config PLAT_VERSATILE
 	bool
 
-source "arch/arm/firmware/Kconfig"
-
-source arch/arm/mm/Kconfig
+source "arch/arm/mm/Kconfig"
 
 config IWMMXT
 	bool "Enable iWMMXt support"
-	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B
-	default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B
+	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK
+	default y if PXA27x || PXA3xx || ARCH_MMP
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
 
-config MULTI_IRQ_HANDLER
-	bool
-	help
-	  Allow each machine to specify it's own IRQ handler at run time.
-
 if !MMU
 source "arch/arm/Kconfig-nommu"
 endif
@@ -993,7 +580,9 @@ config ARM_ERRATA_458693
 	  hazard might then cause a processor deadlock. The workaround enables
 	  the L1 caching of the NEON accesses and disables the PLD instruction
 	  in the ACTLR register. Note that setting specific bits in the ACTLR
-	  register may not be available in non-secure mode.
+	  register may not be available in non-secure mode and thus is not
+	  available on a multiplatform kernel. This should be applied by the
+	  bootloader instead.
 
 config ARM_ERRATA_460075
 	bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
@@ -1006,7 +595,9 @@ config ARM_ERRATA_460075
 	  and overwritten with stale memory contents from external memory. The
 	  workaround disables the write-allocate mode for the L2 cache via the
 	  ACTLR register. Note that setting specific bits in the ACTLR register
-	  may not be available in non-secure mode.
+	  may not be available in non-secure mode and thus is not available on
+	  a multiplatform kernel. This should be applied by the bootloader
+	  instead.
 
 config ARM_ERRATA_742230
 	bool "ARM errata: DMB operation may be faulty"
@@ -1019,7 +610,10 @@ config ARM_ERRATA_742230
 	  ordering of the two writes. This workaround sets a specific bit in
 	  the diagnostic register of the Cortex-A9 which causes the DMB
 	  instruction to behave as a DSB, ensuring the correct behaviour of
-	  the two writes.
+	  the two writes. Note that setting specific bits in the diagnostics
+	  register may not be available in non-secure mode and thus is not
+	  available on a multiplatform kernel. This should be applied by the
+	  bootloader instead.
 
 config ARM_ERRATA_742231
 	bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
@@ -1034,7 +628,10 @@ config ARM_ERRATA_742231
 	  replaced from one of the CPUs at the same time as another CPU is
 	  accessing it. This workaround sets specific bits in the diagnostic
 	  register of the Cortex-A9 which reduces the linefill issuing
-	  capabilities of the processor.
+	  capabilities of the processor. Note that setting specific bits in the
+	  diagnostics register may not be available in non-secure mode and thus
+	  is not available on a multiplatform kernel. This should be applied by
+	  the bootloader instead.
 
 config ARM_ERRATA_643719
 	bool "ARM errata: LoUIS bit field in CLIDR register is incorrect"
@@ -1071,7 +668,9 @@ config ARM_ERRATA_743622
 	  register of the Cortex-A9 which disables the Store Buffer
 	  optimisation, preventing the defect from occurring. This has no
 	  visible impact on the overall performance or power consumption of the
-	  processor.
+	  processor. Note that setting specific bits in the diagnostics register
+	  may not be available in non-secure mode and thus is not available on a
+	  multiplatform kernel. This should be applied by the bootloader instead.
 
 config ARM_ERRATA_751472
 	bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
@@ -1083,6 +682,10 @@ config ARM_ERRATA_751472
 	  completion of a following broadcasted operation if the second
 	  operation is received by a CPU before the ICIALLUIS has completed,
 	  potentially leading to corrupted entries in the cache or TLB.
+	  Note that setting specific bits in the diagnostics register may
+	  not be available in non-secure mode and thus is not available on
+	  a multiplatform kernel. This should be applied by the bootloader
+	  instead.
 
 config ARM_ERRATA_754322
 	bool "ARM errata: possible faulty MMU translations following an ASID switch"
@@ -1132,12 +735,23 @@ config ARM_ERRATA_764369
 	  relevant cache maintenance functions and sets a specific bit
 	  in the diagnostic control register of the SCU.
 
+config ARM_ERRATA_764319
+	bool "ARM errata: Read to DBGPRSR and DBGOSLSR may generate Undefined instruction"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 764319 Cortex-A9 erratum.
+	  CP14 read accesses to the DBGPRSR and DBGOSLSR registers generate an
+	  unexpected Undefined Instruction exception when the DBGSWENABLE
+	  external pin is set to 0, even when the CP14 accesses are performed
+	  from a privileged mode. This work around catches the exception in a
+	  way the kernel does not stop execution.
+
 config ARM_ERRATA_775420
        bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
        depends on CPU_V7
        help
 	 This option enables the workaround for the 775420 Cortex-A9 (r2p2,
-	 r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance
+	 r2p6,r2p8,r2p10,r3p0) erratum. In case a data cache maintenance
 	 operation aborts with MMU exception, it might cause the processor
 	 to deadlock. This workaround puts DSB before executing ISB if
 	 an abort may occur on cache maintenance.
@@ -1194,6 +808,14 @@ config ARM_ERRATA_825619
 	  DMB NSHST or DMB ISHST instruction followed by a mix of Cacheable
 	  and Device/Strongly-Ordered loads and stores might cause deadlock
 
+config ARM_ERRATA_857271
+	bool "ARM errata: A12: CPU might deadlock under some very rare internal conditions"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 857271 Cortex-A12
+	  (all revs) erratum. Under very rare timing conditions, the CPU might
+	  hang. The workaround is expected to have a < 1% performance impact.
+
 config ARM_ERRATA_852421
 	bool "ARM errata: A17: DMB ST might fail to create order between stores"
 	depends on CPU_V7
@@ -1215,6 +837,16 @@ config ARM_ERRATA_852423
 	  config option from the A12 erratum due to the way errata are checked
 	  for and handled.
 
+config ARM_ERRATA_857272
+	bool "ARM errata: A17: CPU might deadlock under some very rare internal conditions"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 857272 Cortex-A17 erratum.
+	  This erratum is not known to be fixed in any A17 revision.
+	  This is identical to Cortex-A12 erratum 857271.  It is a separate
+	  config option from the A12 erratum due to the way errata are checked
+	  for and handled.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
@@ -1230,48 +862,21 @@ config ISA
 	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
 	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
 
-# Select ISA DMA controller support
-config ISA_DMA
-	bool
-	select ISA_DMA_API
-
 # Select ISA DMA interface
 config ISA_DMA_API
 	bool
 
-config PCI
-	bool "PCI support" if MIGHT_HAVE_PCI
-	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-	  VESA. If you have PCI, say Y, otherwise N.
-
-config PCI_DOMAINS
-	bool
-	depends on PCI
-
-config PCI_DOMAINS_GENERIC
-	def_bool PCI_DOMAINS
-
-config PCI_NANOENGINE
-	bool "BSE nanoEngine PCI support"
-	depends on SA1100_NANOENGINE
+config ARM_ERRATA_814220
+	bool "ARM errata: Cache maintenance by set/way operations can execute out of order"
+	depends on CPU_V7
 	help
-	  Enable PCI on the BSE nanoEngine board.
-
-config PCI_SYSCALL
-	def_bool PCI
-
-config PCI_HOST_ITE8152
-	bool
-	depends on PCI && MACH_ARMCORE
-	default y
-	select DMABOUNCE
-
-source "drivers/pci/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
+	  The v7 ARM states that all cache and branch predictor maintenance
+	  operations that do not specify an address execute, relative to
+	  each other, in program order.
+	  However, because of this erratum, an L2 set/way cache maintenance
+	  operation can overtake an L1 set/way cache maintenance operation.
+	  This ERRATA only affected the Cortex-A7 and present in r0p2, r0p3,
+	  r0p4, r0p5.
 
 endmenu
 
@@ -1289,7 +894,6 @@ config HAVE_SMP
 config SMP
 	bool "Symmetric Multi-Processing"
 	depends on CPU_V6K || CPU_V7
-	depends on GENERIC_CLOCKEVENTS
 	depends on HAVE_SMP
 	depends on MMU || ARM_MPU
 	select IRQ_WORK
@@ -1304,15 +908,15 @@ config SMP
 	  uniprocessor machines. On a uniprocessor machine, the kernel
 	  will run faster if you say N here.
 
-	  See also <file:Documentation/x86/i386/IO-APIC.txt>,
-	  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+	  See also <file:Documentation/arch/x86/i386/IO-APIC.rst>,
+	  <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO available at
 	  <http://tldp.org/HOWTO/SMP-HOWTO.html>.
 
 	  If you don't know what to do here, say N.
 
 config SMP_ON_UP
 	bool "Allow booting SMP kernel on uniprocessor systems"
-	depends on SMP && !XIP_KERNEL && MMU
+	depends on SMP && MMU
 	default y
 	help
 	  SMP kernels contain instructions which fail on non-SMP processors.
@@ -1322,47 +926,41 @@ config SMP_ON_UP
 
 	  If you don't know what to do here, say Y.
 
+
+config CURRENT_POINTER_IN_TPIDRURO
+	def_bool y
+	depends on CPU_32v6K && !CPU_V6
+
+config IRQSTACKS
+	def_bool y
+	select HAVE_IRQ_EXIT_ON_IRQ_STACK
+	select HAVE_SOFTIRQ_ON_OWN_STACK
+
 config ARM_CPU_TOPOLOGY
 	bool "Support cpu topology definition"
 	depends on SMP && CPU_V7
+	select ARCH_SUPPORTS_SCHED_MC
+	select ARCH_SUPPORTS_SCHED_SMT
 	default y
 	help
 	  Support ARM cpu topology definition. The MPIDR register defines
 	  affinity between processors which is then used to describe the cpu
 	  topology of an ARM System.
 
-config SCHED_MC
-	bool "Multi-core scheduler support"
-	depends on ARM_CPU_TOPOLOGY
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
-config SCHED_SMT
-	bool "SMT scheduler support"
-	depends on ARM_CPU_TOPOLOGY
-	help
-	  Improves the CPU scheduler's decision making when dealing with
-	  MultiThreading at a cost of slightly increased overhead in some
-	  places. If unsure say N here.
-
 config HAVE_ARM_SCU
 	bool
 	help
-	  This option enables support for the ARM system coherency unit
+	  This option enables support for the ARM snoop control unit
 
 config HAVE_ARM_ARCH_TIMER
 	bool "Architected timer support"
 	depends on CPU_V7
 	select ARM_ARCH_TIMER
-	select GENERIC_CLOCKEVENTS
 	help
 	  This option enables support for the ARM architected timer
 
 config HAVE_ARM_TWD
 	bool
-	select TIMER_OF if OF
 	help
 	  This options enables support for the ARM timer and watchdog unit
 
@@ -1437,15 +1035,31 @@ config PAGE_OFFSET
 	default 0xB0000000 if VMSPLIT_3G_OPT
 	default 0xC0000000
 
+config KASAN_SHADOW_OFFSET
+	hex
+	depends on KASAN
+	default 0x1f000000 if PAGE_OFFSET=0x40000000
+	default 0x5f000000 if PAGE_OFFSET=0x80000000
+	default 0x9f000000 if PAGE_OFFSET=0xC0000000
+	default 0x8f000000 if PAGE_OFFSET=0xB0000000
+	default 0xffffffff
+
 config NR_CPUS
 	int "Maximum number of CPUs (2-32)"
-	range 2 32
+	range 2 16 if DEBUG_KMAP_LOCAL
+	range 2 32 if !DEBUG_KMAP_LOCAL
 	depends on SMP
 	default "4"
+	help
+	  The maximum number of CPUs that the kernel can support.
+	  Up to 32 CPUs can be supported, or up to 16 if kmap_local()
+	  debugging is enabled, which uses half of the per-CPU fixmap
+	  slots as guard regions.
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
 	depends on SMP
+	select GENERIC_IRQ_MIGRATION
 	help
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.
@@ -1461,32 +1075,8 @@ config ARM_PSCI
 	  0022A ("Power State Coordination Interface System Software on
 	  ARM processors").
 
-# The GPIO number here must be sorted by descending number. In case of
-# a multiplatform kernel, we just want the highest value required by the
-# selected platforms.
-config ARCH_NR_GPIO
-	int
-	default 2048 if ARCH_SOCFPGA
-	default 1024 if ARCH_BRCMSTB || ARCH_SHMOBILE || ARCH_TEGRA || \
-		ARCH_ZYNQ
-	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \
-		SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
-	default 416 if ARCH_SUNXI
-	default 392 if ARCH_U8500
-	default 352 if ARCH_VT8500
-	default 288 if ARCH_ROCKCHIP
-	default 264 if MACH_H4700
-	default 0
-	help
-	  Maximum number of GPIOs in the system.
-
-	  If unsure, leave the default value.
-
-source kernel/Kconfig.preempt
-
 config HZ_FIXED
 	int
-	default 200 if ARCH_EBSA110
 	default 128 if SOC_AT91RM9200
 	default 0
 
@@ -1531,53 +1121,16 @@ config THUMB2_KERNEL
 	bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY
 	depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K
 	default y if CPU_THUMBONLY
-	select AEABI
-	select ARM_ASM_UNIFIED
 	select ARM_UNWIND
 	help
 	  By enabling this option, the kernel will be compiled in
-	  Thumb-2 mode. A compiler/assembler that understand the unified
-	  ARM-Thumb syntax is needed.
+	  Thumb-2 mode.
 
 	  If unsure, say N.
 
-config THUMB2_AVOID_R_ARM_THM_JUMP11
-	bool "Work around buggy Thumb-2 short branch relocations in gas"
-	depends on THUMB2_KERNEL && MODULES
-	default y
-	help
-	  Various binutils versions can resolve Thumb-2 branches to
-	  locally-defined, preemptible global symbols as short-range "b.n"
-	  branch instructions.
-
-	  This is a problem, because there's no guarantee the final
-	  destination of the symbol, or any candidate locations for a
-	  trampoline, are within range of the branch.  For this reason, the
-	  kernel does not support fixing up the R_ARM_THM_JUMP11 (102)
-	  relocation in modules at all, and it makes little sense to add
-	  support.
-
-	  The symptom is that the kernel fails with an "unsupported
-	  relocation" error when loading some modules.
-
-	  Until fixed tools are available, passing
-	  -fno-optimize-sibling-calls to gcc should prevent gcc generating
-	  code which hits this problem, at the cost of a bit of extra runtime
-	  stack usage in some cases.
-
-	  The problem is described in more detail at:
-	      https://bugs.launchpad.net/binutils-linaro/+bug/725126
-
-	  Only Thumb-2 kernels are affected.
-
-	  Unless you are sure your tools don't have this problem, say Y.
-
-config ARM_ASM_UNIFIED
-	bool
-
 config ARM_PATCH_IDIV
 	bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()"
-	depends on CPU_32v7 && !XIP_KERNEL
+	depends on CPU_32v7
 	default y
 	help
 	  The ARM compiler inserts calls to __aeabi_idiv() and
@@ -1594,7 +1147,9 @@ config ARM_PATCH_IDIV
 	  code to do integer division.
 
 config AEABI
-	bool "Use the ARM EABI to compile the kernel"
+	bool "Use the ARM EABI to compile the kernel" if !CPU_V7 && \
+		!CPU_V7M && !CPU_V6 && !CPU_V6K && !CC_IS_CLANG
+	default CPU_V7 || CPU_V7M || CPU_V6 || CPU_V6K || CC_IS_CLANG
 	help
 	  This option allows for the kernel to be compiled using the latest
 	  ARM ABI (aka EABI).  This is only useful if you are using a user
@@ -1606,8 +1161,6 @@ config AEABI
 	  disambiguate both ABIs and allow for backward compatibility support
 	  (selected with CONFIG_OABI_COMPAT).
 
-	  To use this you need GCC version 4.0.0 or later.
-
 config OABI_COMPAT
 	bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
 	depends on AEABI && !THUMB2_KERNEL
@@ -1629,28 +1182,21 @@ config OABI_COMPAT
 	  UNPREDICTABLE (in fact it can be predicted that it won't work
 	  at all). If in doubt say N.
 
-config ARCH_HAS_HOLES_MEMORYMODEL
-	bool
-
-config ARCH_SPARSEMEM_ENABLE
-	bool
-
-config ARCH_SPARSEMEM_DEFAULT
-	def_bool ARCH_SPARSEMEM_ENABLE
-
 config ARCH_SELECT_MEMORY_MODEL
-	def_bool ARCH_SPARSEMEM_ENABLE
+	def_bool y
 
-config HAVE_ARCH_PFN_VALID
-	def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
+config ARCH_FLATMEM_ENABLE
+	def_bool !(ARCH_RPC || ARCH_SA1100)
 
-config HAVE_GENERIC_GUP
-	def_bool y
-	depends on ARM_LPAE
+config ARCH_SPARSEMEM_ENABLE
+	def_bool !ARCH_FOOTBRIDGE
+	select SPARSEMEM_STATIC if SPARSEMEM
 
 config HIGHMEM
 	bool "High Memory Support"
 	depends on MMU
+	select KMAP_LOCAL
+	select KMAP_LOCAL_NON_LINEAR_PTE_ARRAY
 	help
 	  The address space of ARM processors is only 4 Gigabytes large
 	  and it has to accommodate user address space, kernel address
@@ -1676,9 +1222,9 @@ config HIGHPTE
 	  consumed by page tables.  Setting this option will allow
 	  user-space 2nd level page tables to reside in high memory.
 
-config CPU_SW_DOMAIN_PAN
-	bool "Enable use of CPU domains to implement privileged no-access"
-	depends on MMU && !ARM_LPAE
+config ARM_PAN
+	bool "Enable privileged no-access"
+	depends on MMU
 	default y
 	help
 	  Increase kernel security by ensuring that normal kernel accesses
@@ -1687,28 +1233,35 @@ config CPU_SW_DOMAIN_PAN
 	  by ensuring that magic values (such as LIST_POISON) will always
 	  fault when dereferenced.
 
+	  The implementation uses CPU domains when !CONFIG_ARM_LPAE and
+	  disabling of TTBR0 page table walks with CONFIG_ARM_LPAE.
+
+config CPU_SW_DOMAIN_PAN
+	def_bool y
+	depends on ARM_PAN && !ARM_LPAE
+	help
+	  Enable use of CPU domains to implement privileged no-access.
+
 	  CPUs with low-vector mappings use a best-efforts implementation.
 	  Their lower 1MB needs to remain accessible for the vectors, but
 	  the remainder of userspace will become appropriately inaccessible.
 
-config HW_PERF_EVENTS
+config CPU_TTBR0_PAN
 	def_bool y
-	depends on ARM_PMU
-
-config SYS_SUPPORTS_HUGETLBFS
-       def_bool y
-       depends on ARM_LPAE
-
-config HAVE_ARCH_TRANSPARENT_HUGEPAGE
-       def_bool y
-       depends on ARM_LPAE
+	depends on ARM_PAN && ARM_LPAE
+	help
+	  Enable privileged no-access by disabling TTBR0 page table walks when
+	  running in kernel mode.
 
-config ARCH_WANT_GENERAL_HUGETLB
+config HW_PERF_EVENTS
 	def_bool y
+	depends on ARM_PMU
 
 config ARM_MODULE_PLTS
 	bool "Use PLTs to allow module memory to spill over into vmalloc area"
 	depends on MODULES
+	select KASAN_VMALLOC if KASAN
+	default y
 	help
 	  Allocate PLTs when loading modules so that jumps and calls whose
 	  targets are too far away for their relative offsets to be encoded
@@ -1719,30 +1272,26 @@ config ARM_MODULE_PLTS
 	  rounding up to page size, the actual memory footprint is usually
 	  the same.
 
-	  Say y if you are getting out of memory errors while loading modules
-
-source "mm/Kconfig"
+	  Disabling this is usually safe for small single-platform
+	  configurations. If unsure, say y.
 
-config FORCE_MAX_ZONEORDER
-	int "Maximum zone order"
-	default "12" if SOC_AM33XX
-	default "9" if SA1111 || ARCH_EFM32
-	default "11"
+config ARCH_FORCE_MAX_ORDER
+	int "Order of maximal physically contiguous allocations"
+	default "11" if SOC_AM33XX
+	default "8" if SA1111
+	default "10"
 	help
-	  The kernel memory allocator divides physically contiguous memory
-	  blocks into "zones", where each zone is a power of two number of
-	  pages.  This option selects the largest power of two that the kernel
-	  keeps in the memory allocator.  If you need to allocate very large
-	  blocks of physically contiguous memory, then you may need to
-	  increase this value.
+	  The kernel page allocator limits the size of maximal physically
+	  contiguous allocations. The limit is called MAX_PAGE_ORDER and it
+	  defines the maximal power of two of number of pages that can be
+	  allocated as a single contiguous block. This option allows
+	  overriding the default setting when ability to allocate very
+	  large blocks of physically contiguous memory is required.
 
-	  This config option is actually maximum order plus one. For example,
-	  a value of 11 means that the largest free memory block is 2^10 pages.
+	  Don't change if unsure.
 
 config ALIGNMENT_TRAP
-	bool
-	depends on CPU_CP15_MMU
-	default y if !ARCH_EBSA110
+	def_bool CPU_CP15_MMU
 	select HAVE_PROC_CPU if PROC_FS
 	help
 	  ARM processors cannot fetch/store information which is not
@@ -1769,26 +1318,6 @@ config UACCESS_WITH_MEMCPY
 	  However, if the CPU data cache is using a write-allocate mode,
 	  this option is unlikely to provide any performance gain.
 
-config SECCOMP
-	bool
-	prompt "Enable seccomp to safely compute untrusted bytecode"
-	---help---
-	  This kernel feature is useful for number crunching applications
-	  that may need to compute untrusted bytecode during their
-	  execution. By using pipes or other transports made available to
-	  the process as file descriptors supporting the read/write
-	  syscalls, it's possible to isolate those applications in
-	  their own address space using seccomp. Once seccomp is
-	  enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
-	  and the task is only allowed to execute a few safe syscalls
-	  defined by each seccomp mode.
-
-config SWIOTLB
-	def_bool y
-
-config IOMMU_HELPER
-	def_bool SWIOTLB
-
 config PARAVIRT
 	bool "Enable paravirtualization code"
 	help
@@ -1799,7 +1328,6 @@ config PARAVIRT
 config PARAVIRT_TIME_ACCOUNTING
 	bool "Paravirtual steal time accounting"
 	select PARAVIRT
-	default n
 	help
 	  Select this option to enable fine granularity task steal time
 	  accounting. Time spent executing other tasks in parallel with
@@ -1820,11 +1348,30 @@ config XEN
 	depends on MMU
 	select ARCH_DMA_ADDR_T_64BIT
 	select ARM_PSCI
+	select SWIOTLB
 	select SWIOTLB_XEN
 	select PARAVIRT
 	help
 	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
 
+config CC_HAVE_STACKPROTECTOR_TLS
+	def_bool $(cc-option,-mtp=cp15 -mstack-protector-guard=tls -mstack-protector-guard-offset=0)
+
+config STACKPROTECTOR_PER_TASK
+	bool "Use a unique stack canary value for each task"
+	depends on STACKPROTECTOR && CURRENT_POINTER_IN_TPIDRURO && !XIP_DEFLATED_DATA
+	depends on CC_HAVE_STACKPROTECTOR_TLS
+	default y
+	help
+	  Due to the fact that GCC uses an ordinary symbol reference from
+	  which to load the value of the stack canary, this value can only
+	  change at reboot time on SMP systems, and all tasks running in the
+	  kernel's address space are forced to use the same canary value for
+	  the entire duration that the system is up.
+
+	  Enable this option to switch to a different method that uses a
+	  different canary value for each task.
+
 endmenu
 
 menu "Boot options"
@@ -1836,15 +1383,17 @@ config USE_OF
 	help
 	  Include support for flattened device tree machine descriptions.
 
+config ARCH_WANT_FLAT_DTB_INSTALL
+	def_bool y
+
 config ATAGS
-	bool "Support for the traditional ATAGS boot data passing" if USE_OF
+	bool "Support for the traditional ATAGS boot data passing"
 	default y
 	help
 	  This is the traditional way of passing data to the kernel at boot
 	  time. If you are solely relying on the flattened device tree (or
 	  the ARM_ATAG_DTB_COMPAT option) then you may unselect this option
-	  to remove ATAGS support from your kernel binary.  If unsure,
-	  leave this to y.
+	  to remove ATAGS support from your kernel binary.
 
 config DEPRECATED_PARAM_STRUCT
 	bool "Provide old way to pass kernel parameters"
@@ -1857,7 +1406,7 @@ config DEPRECATED_PARAM_STRUCT
 # TEXT and BSS so we preserve their values in the config files.
 config ZBOOT_ROM_TEXT
 	hex "Compressed ROM boot loader base address"
-	default "0"
+	default 0x0
 	help
 	  The physical address at which the ROM-able zImage is to be
 	  placed in the target.  Platforms which normally make use of
@@ -1868,7 +1417,7 @@ config ZBOOT_ROM_TEXT
 
 config ZBOOT_ROM_BSS
 	hex "Compressed ROM boot loader BSS address"
-	default "0"
+	default 0x0
 	help
 	  The base address of an area of read/write memory in the target
 	  for the ROM-able zImage which must be available while the
@@ -1920,7 +1469,8 @@ config ARM_ATAG_DTB_COMPAT
 	  from the ATAG list and store it at run time into the appended DTB.
 
 choice
-	prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT
+	prompt "Kernel command line type"
+	depends on ARM_ATAG_DTB_COMPAT
 	default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
 
 config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
@@ -1942,16 +1492,16 @@ config CMDLINE
 	string "Default kernel command string"
 	default ""
 	help
-	  On some architectures (EBSA110 and CATS), there is currently no way
+	  On some architectures (e.g. CATS), there is currently no way
 	  for the boot loader to pass arguments to the kernel. For these
 	  architectures, you should supply some command-line options at build
 	  time by entering them here. As a minimum, you should specify the
 	  memory size and the root device (e.g., mem=64M root=/dev/nfs).
 
 choice
-	prompt "Kernel command line type" if CMDLINE != ""
+	prompt "Kernel command line type"
+	depends on CMDLINE != ""
 	default CMDLINE_FROM_BOOTLOADER
-	depends on ATAGS
 
 config CMDLINE_FROM_BOOTLOADER
 	bool "Use bootloader kernel arguments if available"
@@ -1978,6 +1528,7 @@ endchoice
 config XIP_KERNEL
 	bool "Kernel Execute-In-Place from ROM"
 	depends on !ARM_LPAE && !ARCH_MULTIPLATFORM
+	depends on !ARM_PATCH_IDIV && !ARM_PATCH_PHYS_VIRT && !SMP_ON_UP
 	help
 	  Execute-In-Place allows the kernel to run from non-volatile storage
 	  directly addressable by the CPU, such as NOR flash. This saves RAM
@@ -2005,20 +1556,19 @@ config XIP_PHYS_ADDR
 	  be linked for and stored to.  This address is dependent on your
 	  own flash usage.
 
-config KEXEC
-	bool "Kexec system call (EXPERIMENTAL)"
-	depends on (!SMP || PM_SLEEP_SMP)
-	depends on !CPU_V7M
-	select KEXEC_CORE
+config XIP_DEFLATED_DATA
+	bool "Store kernel .data section compressed in ROM"
+	depends on XIP_KERNEL
+	select ZLIB_INFLATE
 	help
-	  kexec is a system call that implements the ability to shutdown your
-	  current kernel, and to start another kernel.  It is like a reboot
-	  but it is independent of the system firmware.   And like a reboot
-	  you can start any kernel with it, not just Linux.
+	  Before the kernel is actually executed, its .data section has to be
+	  copied to RAM from ROM. This option allows for storing that data
+	  in compressed form and decompressed to RAM rather than merely being
+	  copied, saving some precious ROM space. A possible drawback is a
+	  slightly longer boot delay.
 
-	  It is an ongoing process to be certain the hardware in a machine
-	  is properly shutdown, so do not be surprised if this code does not
-	  initially work for you.
+config ARCH_SUPPORTS_KEXEC
+	def_bool (!SMP || PM_SLEEP_SMP) && MMU
 
 config ATAGS_PROC
 	bool "Export atags in procfs"
@@ -2028,26 +1578,22 @@ config ATAGS_PROC
 	  Should the atags used to boot the kernel be exported in an "atags"
 	  file in procfs. Useful with kexec.
 
-config CRASH_DUMP
-	bool "Build kdump crash kernel (EXPERIMENTAL)"
-	help
-	  Generate crash dump after being started by kexec. This should
-	  be normally only set in special crash dump kernels which are
-	  loaded in the main kernel with kexec-tools into a specially
-	  reserved region and then later executed after a crash by
-	  kdump/kexec. The crash dump kernel must be compiled to a
-	  memory address not used by the main kernel
+config ARCH_SUPPORTS_CRASH_DUMP
+	def_bool y
 
-	  For more details see Documentation/kdump/kdump.txt
+config ARCH_DEFAULT_CRASH_DUMP
+	def_bool y
 
 config AUTO_ZRELADDR
-	bool "Auto calculation of the decompressed kernel image address"
+	bool "Auto calculation of the decompressed kernel image address" if !ARCH_MULTIPLATFORM
+	default !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	help
 	  ZRELADDR is the physical address where the decompressed kernel
 	  image will be placed. If AUTO_ZRELADDR is selected, the address
-	  will be determined at run-time by masking the current IP with
-	  0xf8000000. This assumes the zImage being placed in the first 128MB
-	  from start of memory.
+	  will be determined at run-time, either by masking the current IP
+	  with 0xf8000000, or, if invalid, from the DTB passed in r2.
+	  This assumes the zImage being placed in the first 128MB from
+	  start of memory.
 
 config EFI_STUB
 	bool
@@ -2058,9 +1604,9 @@ config EFI
 	select UCS2_STRING
 	select EFI_PARAMS_FROM_FDT
 	select EFI_STUB
-	select EFI_ARMSTUB
+	select EFI_GENERIC_STUB
 	select EFI_RUNTIME_WRAPPERS
-	---help---
+	help
 	  This option provides support for runtime services provided
 	  by UEFI firmware (such as non-volatile variables, realtime
 	  clock, and platform reset). A UEFI stub is also provided to
@@ -2102,7 +1648,7 @@ comment "At least one emulation must be selected"
 config FPE_NWFPE
 	bool "NWFPE math emulation"
 	depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
-	---help---
+	help
 	  Say Y to include the NWFPE floating point emulator in the kernel.
 	  This is necessary to run most binaries. Linux does not currently
 	  support floating point hardware so you need to say Y here even if
@@ -2126,7 +1672,7 @@ config FPE_NWFPE_XP
 config FPE_FASTFPE
 	bool "FastFPE math emulation (EXPERIMENTAL)"
 	depends on (!AEABI || OABI_COMPAT) && !CPU_32v3
-	---help---
+	help
 	  Say Y here to include the FAST floating point emulator in the kernel.
 	  This is an experimental much faster emulator which now also has full
 	  precision for the mantissa.  It does not support any exceptions.
@@ -2144,7 +1690,7 @@ config VFP
 	  Say Y to include VFP support code in the kernel. This is needed
 	  if your hardware includes a VFP unit.
 
-	  Please see <file:Documentation/arm/VFP/release-notes.txt> for
+	  Please see <file:Documentation/arch/arm/vfp/release-notes.rst> for
 	  release notes and additional status information.
 
 	  Say N if your target does not have VFP hardware.
@@ -2169,12 +1715,6 @@ config KERNEL_MODE_NEON
 
 endmenu
 
-menu "Userspace binary formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
 menu "Power management options"
 
 source "kernel/power/Kconfig"
@@ -2194,24 +1734,3 @@ config ARCH_HIBERNATION_POSSIBLE
 	default y if ARCH_SUSPEND_POSSIBLE
 
 endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "drivers/firmware/Kconfig"
-
-source "fs/Kconfig"
-
-source "arch/arm/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-if CRYPTO
-source "arch/arm/crypto/Kconfig"
-endif
-
-source "lib/Kconfig"
-
-source "arch/arm/kvm/Kconfig"
diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu
index b7576349528c..36c80d3dd93f 100644
--- a/arch/arm/Kconfig-nommu
+++ b/arch/arm/Kconfig-nommu
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 #
 # Kconfig for uClinux(non-paged MM) depend configurations
 # Hyok S. Choi <hyok.choi@samsung.com>
@@ -19,10 +20,12 @@ config DRAM_SIZE
 
 config FLASH_MEM_BASE
 	hex 'FLASH Base Address' if SET_MEM_PARAM
+	depends on CPU_ARM740T || CPU_ARM946E || CPU_ARM940T
 	default 0x00400000
 
 config FLASH_SIZE
 	hex 'FLASH Size' if SET_MEM_PARAM
+	depends on CPU_ARM740T || CPU_ARM946E || CPU_ARM940T
 	default 0x00400000
 
 config PROCESSOR_ID
@@ -52,8 +55,8 @@ config REMAP_VECTORS_TO_RAM
 
 config ARM_MPU
        bool 'Use the ARM v7 PMSA Compliant MPU'
-       depends on CPU_V7
-       default y
+       depends on CPU_V7 || CPU_V7M
+       default y if CPU_V7
        help
          Some ARM systems without an MMU have instead a Memory Protection
          Unit (MPU) that defines the type and permissions for regions of
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 447629d89884..366f162e147d 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1,13 +1,15 @@
-menu "Kernel hacking"
+# SPDX-License-Identifier: GPL-2.0
 
-source "lib/Kconfig.debug"
+config ARM_PTDUMP_CORE
+	def_bool n
 
-config ARM_PTDUMP
+config ARM_PTDUMP_DEBUGFS
 	bool "Export kernel pagetable layout to userspace via debugfs"
 	depends on DEBUG_KERNEL
 	depends on MMU
+	select ARM_PTDUMP_CORE
 	select DEBUG_FS
-	---help---
+	help
 	  Say Y here if you want to show the kernel pagetable layout in a
 	  debugfs file. This information is only useful for kernel developers
 	  who are working in architecture specific areas of the kernel.
@@ -15,35 +17,78 @@ config ARM_PTDUMP
 	  kernel.
 	  If in doubt, say "N"
 
-# RMK wants arm kernels compiled with frame pointers or stack unwinding.
-# If you know what you are doing and are willing to live without stack
-# traces, you can get a slightly smaller kernel by setting this option to
-# n, but then RMK will have to kill you ;).
-config FRAME_POINTER
-	bool
+config ARM_DEBUG_WX
+	bool "Warn on W+X mappings at boot"
+	depends on MMU
+	select ARM_PTDUMP_CORE
+	help
+		Generate a warning if any W+X mappings are found at boot.
+
+		This is useful for discovering cases where the kernel is leaving
+		W+X mappings after applying NX, as such mappings are a security risk.
+
+		Look for a message in dmesg output like this:
+
+			arm/mm: Checked W+X mappings: passed, no W+X pages found.
+
+		or like this, if the check failed:
+
+			arm/mm: Checked W+X mappings: FAILED, <N> W+X pages found.
+
+		Note that even if the check fails, your kernel is possibly
+		still fine, as W+X mappings are not a security hole in
+		themselves, what they do is that they make the exploitation
+		of other unfixed kernel bugs easier.
+
+		There is no runtime or memory usage effect of this option
+		once the kernel has booted up - it's a one time check.
+
+		If in doubt, say "Y".
+
+choice
+	prompt "Choose kernel unwinder"
+	default UNWINDER_ARM if AEABI
+	default UNWINDER_FRAME_POINTER if !AEABI
+	help
+	  This determines which method will be used for unwinding kernel stack
+	  traces for panics, oopses, bugs, warnings, perf, /proc/<pid>/stack,
+	  livepatch, lockdep, and more.
+
+config UNWINDER_FRAME_POINTER
+	bool "Frame pointer unwinder"
 	depends on !THUMB2_KERNEL
-	default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER
+	select ARCH_WANT_FRAME_POINTERS
+	select FRAME_POINTER
 	help
-	  If you say N here, the resulting kernel will be slightly smaller and
-	  faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
-	  when a problem occurs with the kernel, the information that is
-	  reported is severely limited.
+	  This option enables the frame pointer unwinder for unwinding
+	  kernel stack traces.
 
-config ARM_UNWIND
-	bool "Enable stack unwinding support (EXPERIMENTAL)"
+config UNWINDER_ARM
+	bool "ARM EABI stack unwinder"
 	depends on AEABI
-	default y
+	select ARM_UNWIND
 	help
 	  This option enables stack unwinding support in the kernel
 	  using the information automatically generated by the
 	  compiler. The resulting kernel image is slightly bigger but
 	  the performance is not affected. Currently, this feature
-	  only works with EABI compilers. If unsure say Y.
+	  only works with EABI compilers.
+
+endchoice
 
-config OLD_MCOUNT
+config ARM_UNWIND
 	bool
-	depends on FUNCTION_TRACER && FRAME_POINTER
-	default y
+
+config BACKTRACE_VERBOSE
+	bool "Verbose backtrace"
+	depends on EXPERT
+	help
+	  When the kernel produces a warning or oops, the kernel prints a
+	  trace of the call chain. This option controls whether we include
+	  the numeric addresses or only include the symbolic information.
+
+	  In most cases, say N here, unless you are intending to debug the
+	  kernel and have access to the kernel binary image.
 
 config DEBUG_USER
 	bool "Verbose user fault messages"
@@ -110,14 +155,14 @@ choice
 		    0x80024000      | 0xf0024000     | UART9
 
 	config DEBUG_AT91_RM9200_DBGU
-		bool "Kernel low-level debugging on AT91RM9200, AT91SAM9 DBGU"
+		bool "Kernel low-level debugging on AT91RM9200, AT91SAM9, SAM9X60 DBGU"
 		select DEBUG_AT91_UART
-		depends on SOC_AT91RM9200 || SOC_AT91SAM9
+		depends on SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on the DBGU port of:
 		    at91rm9200, at91sam9260, at91sam9g20, at91sam9261,
-		    at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5
+		    at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5, sam9x60
 
 	config DEBUG_AT91_SAM9263_DBGU
 		bool "Kernel low-level debugging on AT91SAM{9263,9G45,A5D3} DBGU"
@@ -154,6 +199,34 @@ choice
 		  their output to the USART1 port on SAMV7 based
 		  machines.
 
+	config DEBUG_AT91_SAMA7G5_FLEXCOM3
+		bool "Kernel low-level debugging on SAMA7G5 FLEXCOM3"
+		select DEBUG_AT91_UART
+		depends on SOC_SAMA7G5
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on the FLEXCOM3 port of SAMA7G5.
+
+	config DEBUG_AT91_LAN966_FLEXCOM
+		bool "Kernel low-level debugging on LAN966 FLEXCOM USART"
+		select DEBUG_AT91_UART
+		depends on SOC_LAN966
+		help
+		Say Y here if you want kernel low-level debugging support
+		on the FLEXCOM port of LAN966.
+
+		DEBUG_UART_PHYS | DEBUG_UART_VIRT
+
+		0xe0040200      | 0xfd040200     | FLEXCOM0
+		0xe0044200      | 0xfd044200     | FLEXCOM1
+		0xe0060200      | 0xfd060200     | FLEXCOM2
+		0xe0064200      | 0xfd064200     | FLEXCOM3
+		0xe0070200      | 0xfd070200     | FLEXCOM4
+
+		By default, enabling FLEXCOM3 port. Based on requirement, use
+		DEBUG_UART_PHYS and DEBUG_UART_VIRT configurations from above
+		table.
+
 	config DEBUG_BCM2835
 		bool "Kernel low-level debugging on BCM2835 PL011 UART"
 		depends on ARCH_BCM2835 && ARCH_MULTI_V6
@@ -169,6 +242,23 @@ choice
 		depends on ARCH_BCM_5301X || ARCH_BCM_NSP
 		select DEBUG_UART_8250
 
+	config DEBUG_BCMBCA
+		bool "Kernel low-level debugging on BCMBCA UART0"
+		depends on ARCH_BCMBCA
+
+	config DEBUG_BCM_HR2
+		bool "Kernel low-level debugging on Hurricane 2 UART2"
+		depends on ARCH_BCM_HR2
+		select DEBUG_UART_8250
+
+	config DEBUG_BCM_IPROC_UART3
+		bool "Kernel low-level debugging on BCM IPROC UART3"
+		depends on ARCH_BCM_CYGNUS
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the third serial port on these devices.
+
 	config DEBUG_BCM_KONA_UART
 		bool "Kernel low-level debugging messages via BCM KONA UART"
 		depends on ARCH_BCM_MOBILE
@@ -182,7 +272,7 @@ choice
 
 	config DEBUG_BCM63XX_UART
 		bool "Kernel low-level debugging on BCM63XX UART"
-		depends on ARCH_BCM_63XX
+		depends on ARCH_BCMBCA
 
 	config DEBUG_BERLIN_UART
 		bool "Marvell Berlin SoC Debug UART"
@@ -218,14 +308,6 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the second serial port on these devices.
 
-	config DEBUG_CNS3XXX
-		bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx"
-		depends on ARCH_CNS3XXX
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want the debug print routines to direct
-                  their output to the CNS3xxx UART0.
-
 	config DEBUG_DAVINCI_DA8XX_UART1
 		bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
 		depends on ARCH_DAVINCI_DA8XX
@@ -242,14 +324,6 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART2 serial port on DaVinci DA8XX devices.
 
-	config DEBUG_DAVINCI_DMx_UART0
-		bool "Kernel low-level debugging on DaVinci DMx using UART0"
-		depends on ARCH_DAVINCI_DMx
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART0 serial port on DaVinci DMx devices.
-
 	config DEBUG_DC21285_PORT
 		bool "Kernel low-level debugging messages via footbridge serial port"
 		depends on FOOTBRIDGE
@@ -350,12 +424,12 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX25.
 
-	config DEBUG_IMX21_IMX27_UART
-		bool "i.MX21 and i.MX27 Debug UART"
-		depends on SOC_IMX21 || SOC_IMX27
+	config DEBUG_IMX27_UART
+		bool "i.MX27 Debug UART"
+		depends on SOC_IMX27
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on i.MX21 or i.MX27.
+		  on i.MX27.
 
 	config DEBUG_IMX28_UART
 		bool "i.MX28 Debug UART"
@@ -459,13 +533,6 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART1 serial port on KEYSTONE2 devices.
 
-	config DEBUG_KS8695_UART
-		bool "KS8695 Debug UART"
-		depends on ARCH_KS8695
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on KS8695.
-
 	config DEBUG_LPC18XX_UART0
 		bool "Kernel low-level debugging via LPC18xx/43xx UART0"
 		depends on ARCH_LPC18XX
@@ -564,6 +631,14 @@ choice
 		  when u-boot hands over to the kernel, the system
 		  silently crashes, with no serial output at all.
 
+	config DEBUG_MSTARV7_PMUART
+		bool "Kernel low-level debugging messages via MSTARV7 PM UART"
+		depends on ARCH_MSTARV7
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  for MSTAR ARMv7-based platforms on PM UART.
+
 	config DEBUG_MT6589_UART0
 		bool "Mediatek mt6589 UART0"
 		depends on ARCH_MEDIATEK
@@ -588,13 +663,6 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  for Mediatek mt8135 based platforms on UART3.
 
-	config DEBUG_NETX_UART
-		bool "Kernel low-level debugging messages via NetX UART"
-		depends on ARCH_NETX
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on Hilscher NetX based platforms.
-
 	config DEBUG_NOMADIK_UART
 		bool "Kernel low-level debugging messages via NOMADIK UART"
 		depends on ARCH_NOMADIK
@@ -646,7 +714,7 @@ choice
 	config DEBUG_OMAP2UART1
 		bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 		help
 		  This covers at least h4, 2430sdp, 3430sdp, 3630sdp,
 		  omap3 torpedo and 3530 lv som.
@@ -654,17 +722,17 @@ choice
 	config DEBUG_OMAP2UART2
 		bool "Kernel low-level debugging messages via OMAP2/3/4 UART2"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_OMAP2UART3
 		bool "Kernel low-level debugging messages via OMAP2 UART3 (n8x0)"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_OMAP3UART3
 		bool "Kernel low-level debugging messages via OMAP3 UART3 (most omap3 boards)"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 		help
 		  This covers at least cm_t3x, beagle, crane, devkit8000,
 		  igep00x0, ldp, n900, n9(50), pandora, overo, touchbook,
@@ -673,75 +741,43 @@ choice
 	config DEBUG_OMAP4UART3
 		bool "Kernel low-level debugging messages via OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_OMAP3UART4
 		bool "Kernel low-level debugging messages via OMAP36XX UART4"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_OMAP4UART4
 		bool "Kernel low-level debugging messages via OMAP4/5 UART4"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
-
-	config DEBUG_OMAP7XXUART1
-		bool "Kernel low-level debugging via OMAP730 UART1"
-		depends on ARCH_OMAP730
 		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP730 based platforms on the UART1.
-
-	config DEBUG_OMAP7XXUART2
-		bool "Kernel low-level debugging via OMAP730 UART2"
-		depends on ARCH_OMAP730
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP730 based platforms on the UART2.
-
-	config DEBUG_OMAP7XXUART3
-		bool "Kernel low-level debugging via OMAP730 UART3"
-		depends on ARCH_OMAP730
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP730 based platforms on the UART3.
 
 	config DEBUG_TI81XXUART1
 		bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_TI81XXUART2
 		bool "Kernel low-level debugging messages via TI81XX UART2"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_TI81XXUART3
 		bool "Kernel low-level debugging messages via TI81XX UART3 (ti8168evm)"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_AM33XXUART1
 		bool "Kernel low-level debugging messages via AM33XX UART1"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_ZOOM_UART
 		bool "Kernel low-level debugging messages via Zoom2/3 UART"
 		depends on ARCH_OMAP2PLUS
 		select DEBUG_OMAP2PLUS_UART
 
-	config DEBUG_PICOXCELL_UART
-		depends on ARCH_PICOXCELL
-		bool "Use PicoXcell UART for low-level debug"
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on PicoXcell based platforms.
-
 	config DEBUG_PXA_UART1
 		depends on ARCH_PXA
 		bool "Use PXA UART1 for low-level debug"
@@ -881,6 +917,20 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  via SCIF2 on Renesas RZ/A1H (R7S72100).
 
+	config DEBUG_R7S9210_SCIF2
+		bool "Kernel low-level debugging messages via SCIF2 on R7S9210"
+		depends on ARCH_R7S9210
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF2 on Renesas RZ/A2M (R7S9210).
+
+	config DEBUG_R7S9210_SCIF4
+		bool "Kernel low-level debugging messages via SCIF4 on R7S9210"
+		depends on ARCH_R7S9210
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF4 on Renesas RZ/A2M (R7S9210).
+
 	config DEBUG_RCAR_GEN1_SCIF0
 		bool "Kernel low-level debugging messages via SCIF0 on R8A7778"
 		depends on ARCH_R8A7778
@@ -896,12 +946,21 @@ choice
 		  via SCIF2 on Renesas R-Car H1 (R8A7779).
 
 	config DEBUG_RCAR_GEN2_SCIF0
-		bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7792/R8A7793"
-		depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7792 || ARCH_R8A7793
+		bool "Kernel low-level debugging messages via SCIF0 on R-Car Gen2 and RZ/G1"
+		depends on ARCH_R8A7743 || ARCH_R8A7744 || ARCH_R8A7790 || \
+			ARCH_R8A7791 || ARCH_R8A7792 || ARCH_R8A7793
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  via SCIF0 on Renesas R-Car H2 (R8A7790), M2-W (R8A7791), V2H
-		  (R8A7792), or M2-N (R8A7793).
+		  via SCIF0 on Renesas RZ/G1M (R8A7743), RZ/G1N (R8A7744),
+		  R-Car H2 (R8A7790), M2-W (R8A7791), V2H (R8A7792), or
+		  M2-N (R8A7793).
+
+	config DEBUG_RCAR_GEN2_SCIF1
+		bool "Kernel low-level debugging messages via SCIF1 on R8A77470"
+		depends on ARCH_R8A77470
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF1 on Renesas RZ/G1C (R8A77470).
 
 	config DEBUG_RCAR_GEN2_SCIF2
 		bool "Kernel low-level debugging messages via SCIF2 on R8A7794"
@@ -910,6 +969,20 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  via SCIF2 on Renesas R-Car E2 (R8A7794).
 
+	config DEBUG_RCAR_GEN2_SCIF4
+		bool "Kernel low-level debugging messages via SCIF4 on R8A7745"
+		depends on ARCH_R8A7745
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF4 on Renesas RZ/G1E (R8A7745).
+
+	config DEBUG_RCAR_GEN2_SCIFA2
+		bool "Kernel low-level debugging messages via SCIFA2 on R8A7742"
+		depends on ARCH_R8A7742
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIFA2 on Renesas RZ/G1H (R8A7742).
+
 	config DEBUG_RMOBILE_SCIFA0
 		bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4"
 		depends on ARCH_R8A73A4
@@ -932,9 +1005,8 @@ choice
 		  via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0).
 
 	config DEBUG_S3C_UART0
-		depends on PLAT_SAMSUNG
+		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
-		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 0 for low-level debug"
@@ -944,9 +1016,8 @@ choice
 		  by the boot-loader before use.
 
 	config DEBUG_S3C_UART1
-		depends on PLAT_SAMSUNG
+		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
-		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 1 for low-level debug"
@@ -956,9 +1027,8 @@ choice
 		  by the boot-loader before use.
 
 	config DEBUG_S3C_UART2
-		depends on PLAT_SAMSUNG
+		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
-		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 2 for low-level debug"
@@ -968,7 +1038,7 @@ choice
 		  by the boot-loader before use.
 
 	config DEBUG_S3C_UART3
-		depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210)
+		depends on ARCH_EXYNOS || ARCH_S5PV210
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
@@ -978,33 +1048,6 @@ choice
 		  their output to UART 3. The port must have been initialised
 		  by the boot-loader before use.
 
-	config DEBUG_S3C2410_UART0
-		depends on ARCH_S3C24XX
-		select DEBUG_S3C2410_UART
-		bool "Use S3C2410/S3C2412 UART 0 for low-level debug"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 0. The port must have been initialised
-		  by the boot-loader before use.
-
-	config DEBUG_S3C2410_UART1
-		depends on ARCH_S3C24XX
-		select DEBUG_S3C2410_UART
-		bool "Use S3C2410/S3C2412 UART 1 for low-level debug"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 1. The port must have been initialised
-		  by the boot-loader before use.
-
-	config DEBUG_S3C2410_UART2
-		depends on ARCH_S3C24XX
-		select DEBUG_S3C2410_UART
-		bool "Use S3C2410/S3C2412 UART 2 for low-level debug"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 2. The port must have been initialised
-		  by the boot-loader before use.
-
 	config DEBUG_SA1100
 		depends on ARCH_SA1100
 		bool "Use SA1100 UARTs for low-level debug"
@@ -1013,22 +1056,37 @@ choice
 		  on SA-11x0 UART ports. The kernel will check for the first
 		  enabled UART in a sequence 3-1-2.
 
+	config DEBUG_SD5203_UART
+		bool "Hisilicon SD5203 Debug UART"
+		depends on ARCH_SD5203
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on SD5203 UART.
+
 	config DEBUG_SOCFPGA_UART0
-		depends on ARCH_SOCFPGA
+		depends on ARCH_INTEL_SOCFPGA
 		bool "Use SOCFPGA UART0 for low-level debug"
 		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on SOCFPGA(Cyclone 5 and Arria 5) based platforms.
 
-	config DEBUG_SOCFPGA_UART1
-		depends on ARCH_SOCFPGA
-		bool "Use SOCFPGA UART1 for low-level debug"
+	config DEBUG_SOCFPGA_ARRIA10_UART1
+		depends on ARCH_INTEL_SOCFPGA
+		bool "Use SOCFPGA Arria10 UART1 for low-level debug"
 		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on SOCFPGA(Arria 10) based platforms.
 
+	config DEBUG_SOCFPGA_CYCLONE5_UART1
+		depends on ARCH_INTEL_SOCFPGA
+		bool "Use SOCFPGA Cyclone 5 UART1 for low-level debug"
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on SOCFPGA(Cyclone 5 and Arria 5) based platforms.
 
 	config DEBUG_SUN9I_UART0
 		bool "Kernel low-level debugging messages via sun9i UART0"
@@ -1062,32 +1120,6 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Allwinner A31/A23 based platforms on the R_UART.
 
-	config DEBUG_SIRFPRIMA2_UART1
-		bool "Kernel low-level debugging messages via SiRFprimaII UART1"
-		depends on ARCH_PRIMA2
-		select DEBUG_SIRFSOC_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart1 port on SiRFprimaII devices.
-
-	config DEBUG_SIRFATLAS7_UART0
-		bool "Kernel low-level debugging messages via SiRFatlas7 UART0"
-		depends on ARCH_ATLAS7
-		select DEBUG_SIRFSOC_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart0 port on SiRFATLAS7 devices.The uart0
-		  is used on SiRFATLAS7 as a extra debug port.sometimes an extra
-		  debug port can be very useful.
-
-	config DEBUG_SIRFATLAS7_UART1
-		bool "Kernel low-level debugging messages via SiRFatlas7 UART1"
-		depends on ARCH_ATLAS7
-		select DEBUG_SIRFSOC_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart1 port on SiRFATLAS7 devices.
-
 	config DEBUG_SPEAR3XX
 		bool "Kernel low-level debugging messages via ST SPEAr 3xx/6xx UART"
 		depends on ARCH_SPEAR3XX || ARCH_SPEAR6XX
@@ -1104,10 +1136,9 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on ST SPEAr13xx based platforms.
 
-	config STIH41X_DEBUG_ASC2
+	config DEBUG_STIH41X_ASC2
 		bool "Use StiH415/416 ASC2 UART for low-level debug"
 		depends on ARCH_STI
-		select DEBUG_STI_UART
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on STiH415/416 based platforms like b2000, which has
@@ -1115,10 +1146,9 @@ choice
 
 		  If unsure, say N.
 
-	config STIH41X_DEBUG_SBC_ASC1
+	config DEBUG_STIH41X_SBC_ASC1
 		bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
 		depends on ARCH_STI
-		select DEBUG_STI_UART
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on STiH415/416 based platforms like b2020. which has
@@ -1126,6 +1156,64 @@ choice
 
 		  If unsure, say N.
 
+	config DEBUG_STIH418_SBC_ASC0
+		bool "Use StiH418 SBC ASC0 UART for low-level debug"
+		depends on ARCH_STI
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STiH418 based platforms which has default UART wired
+		  up to SBC ASC0.
+
+		  If unsure, say N.
+
+	config STM32F4_DEBUG_UART
+		bool "Use STM32F4 UART for low-level debug"
+		depends on MACH_STM32F429 || MACH_STM32F469
+		select DEBUG_STM32_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STM32F4 based platforms, which default UART is wired on
+		  USART1, but another UART instance can be selected by modifying
+		  CONFIG_DEBUG_UART_PHYS.
+
+		  If unsure, say N.
+
+	config STM32F7_DEBUG_UART
+		bool "Use STM32F7 UART for low-level debug"
+		depends on MACH_STM32F746 || MACH_STM32F769
+		select DEBUG_STM32_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STM32F7 based platforms, which default UART is wired on
+		  USART1, but another UART instance can be selected by modifying
+		  CONFIG_DEBUG_UART_PHYS.
+
+		  If unsure, say N.
+
+	config STM32H7_DEBUG_UART
+		bool "Use STM32H7 UART for low-level debug"
+		depends on MACH_STM32H743
+		select DEBUG_STM32_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STM32H7 based platforms, which default UART is wired on
+		  USART1, but another UART instance can be selected by modifying
+		  CONFIG_DEBUG_UART_PHYS.
+
+		  If unsure, say N.
+
+	config STM32MP1_DEBUG_UART
+		bool "Use STM32MP1 UART for low-level debug"
+		depends on MACH_STM32MP157
+		select DEBUG_STM32_UART
+		help
+		  Say Y here if you want kernel low-level debugging support on
+		  STM32MP1-based platforms, where the default UART is wired to
+		  UART4, but another UART instance can be selected by modifying
+		  CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT.
+
+		  If unsure, say N.
+
 	config TEGRA_DEBUG_UART_AUTO_ODMDATA
 		bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"
 		depends on ARCH_TEGRA
@@ -1178,14 +1266,6 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Tegra based platforms.
 
-	config DEBUG_U300_UART
-		bool "Kernel low-level debugging messages via U300 UART0"
-		depends on ARCH_U300
-		select DEBUG_UART_PL01X
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart port on U300 devices.
-
 	config DEBUG_UX500_UART
 		depends on ARCH_U8500
 		bool "Use Ux500 UART for low-level debug"
@@ -1251,18 +1331,6 @@ choice
 		  This option selects UART0 on VIA/Wondermedia System-on-a-chip
 		  devices, including VT8500, WM8505, WM8650 and WM8850.
 
-	config DEBUG_ZTE_ZX
-		bool "Use ZTE ZX UART"
-		select DEBUG_UART_PL01X
-		depends on ARCH_ZX
-		help
-		  Say Y here if you are enabling ZTE ZX296702 SOC and need
-		  debug uart support.
-
-		  This option is preferred over the platform specific
-		  options; the platform specific options are deprecated
-		  and will be soon removed.
-
 	config DEBUG_ZYNQ_UART0
 		bool "Kernel low-level debugging on Xilinx Zynq using UART0"
 		depends on ARCH_ZYNQ
@@ -1320,20 +1388,6 @@ choice
 		  options; the platform specific options are deprecated
 		  and will be soon removed.
 
-	config DEBUG_LL_UART_EFM32
-		bool "Kernel low-level debugging via efm32 UART"
-		depends on ARCH_EFM32
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to an UART or USART port on efm32 based
-		  machines. Use the following addresses for DEBUG_UART_PHYS:
-
-		    0x4000c000 | USART0
-		    0x4000c400 | USART1
-		    0x4000c800 | USART2
-		    0x4000e000 | UART0
-		    0x4000e400 | UART1
-
 	config DEBUG_LL_UART_PL01X
 		bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART"
 		help
@@ -1356,39 +1410,41 @@ config DEBUG_AT91_UART
 config DEBUG_EXYNOS_UART
 	bool
 
-config DEBUG_S3C2410_UART
-	bool
-	select DEBUG_S3C24XX_UART
-
-config DEBUG_S3C24XX_UART
-	bool
-
 config DEBUG_S3C64XX_UART
 	bool
 
 config DEBUG_S5PV210_UART
 	bool
 
+config DEBUG_S3C_UART
+	depends on DEBUG_S3C64XX_UART ||  DEBUG_S5PV210_UART || \
+		   DEBUG_EXYNOS_UART
+	int
+	default "0" if DEBUG_S3C_UART0
+	default "1" if DEBUG_S3C_UART1
+	default "2" if DEBUG_S3C_UART2
+	default "3" if DEBUG_S3C_UART3
+
 config DEBUG_OMAP2PLUS_UART
 	bool
 	depends on ARCH_OMAP2PLUS
 
 config DEBUG_IMX_UART_PORT
-	int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \
-						DEBUG_IMX25_UART || \
-						DEBUG_IMX21_IMX27_UART || \
-						DEBUG_IMX31_UART || \
-						DEBUG_IMX35_UART || \
-						DEBUG_IMX50_UART || \
-						DEBUG_IMX51_UART || \
-						DEBUG_IMX53_UART || \
-						DEBUG_IMX6Q_UART || \
-						DEBUG_IMX6SL_UART || \
-						DEBUG_IMX6SX_UART || \
-						DEBUG_IMX6UL_UART || \
-						DEBUG_IMX7D_UART
+	int "i.MX Debug UART Port Selection"
+	depends on DEBUG_IMX1_UART || \
+		   DEBUG_IMX25_UART || \
+		   DEBUG_IMX27_UART || \
+		   DEBUG_IMX31_UART || \
+		   DEBUG_IMX35_UART || \
+		   DEBUG_IMX50_UART || \
+		   DEBUG_IMX51_UART || \
+		   DEBUG_IMX53_UART || \
+		   DEBUG_IMX6Q_UART || \
+		   DEBUG_IMX6SL_UART || \
+		   DEBUG_IMX6SX_UART || \
+		   DEBUG_IMX6UL_UART || \
+		   DEBUG_IMX7D_UART
 	default 1
-	depends on ARCH_MXC
 	help
 	  Choose UART port on which kernel low-level debug messages
 	  should be output.
@@ -1406,13 +1462,20 @@ config DEBUG_TEGRA_UART
 	bool
 	depends on ARCH_TEGRA
 
-config DEBUG_STI_UART
+config DEBUG_STM32_UART
 	bool
-	depends on ARCH_STI
+	depends on ARCH_STM32
 
-config DEBUG_SIRFSOC_UART
-	bool
-	depends on ARCH_SIRF
+config DEBUG_UART_FLOW_CONTROL
+	bool "Enable flow control (CTS) for the debug UART"
+	depends on DEBUG_LL
+	default y if DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC
+	help
+	  Some UART ports are connected to terminals that will use modem
+	  control signals to indicate whether they are ready to receive text.
+	  In practice this means that the terminal is asserting the special
+	  control signal CTS (Clear To Send). If your debug UART supports
+	  this and your debug terminal will require it, enable this option.
 
 config DEBUG_LL_INCLUDE
 	string
@@ -1426,44 +1489,48 @@ config DEBUG_LL_INCLUDE
 	default "debug/meson.S" if DEBUG_MESON_UARTAO
 	default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
 	default "debug/exynos.S" if DEBUG_EXYNOS_UART
-	default "debug/efm32.S" if DEBUG_LL_UART_EFM32
 	default "debug/icedcc.S" if DEBUG_ICEDCC
 	default "debug/imx.S" if DEBUG_IMX1_UART || \
 				 DEBUG_IMX25_UART || \
-				 DEBUG_IMX21_IMX27_UART || \
+				 DEBUG_IMX27_UART || \
 				 DEBUG_IMX31_UART || \
 				 DEBUG_IMX35_UART || \
 				 DEBUG_IMX50_UART || \
 				 DEBUG_IMX51_UART || \
-				 DEBUG_IMX53_UART ||\
+				 DEBUG_IMX53_UART || \
 				 DEBUG_IMX6Q_UART || \
 				 DEBUG_IMX6SL_UART || \
 				 DEBUG_IMX6SX_UART || \
 				 DEBUG_IMX6UL_UART || \
 				 DEBUG_IMX7D_UART
-	default "debug/ks8695.S" if DEBUG_KS8695_UART
 	default "debug/msm.S" if DEBUG_QCOM_UARTDM
-	default "debug/netx.S" if DEBUG_NETX_UART
 	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
 	default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
+	default "debug/renesas-scif.S" if DEBUG_R7S9210_SCIF2
+	default "debug/renesas-scif.S" if DEBUG_R7S9210_SCIF4
 	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0
 	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF2
 	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF0
+	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF1
 	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF2
+	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF4
+	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIFA2
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
-	default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART
+	default "debug/s3c24xx.S" if DEBUG_S3C64XX_UART
 	default "debug/s5pv210.S" if DEBUG_S5PV210_UART
-	default "debug/sirf.S" if DEBUG_SIRFSOC_UART
-	default "debug/sti.S" if DEBUG_STI_UART
+	default "debug/sti.S" if DEBUG_STIH41X_ASC2
+	default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1
+	default "debug/sti.S" if DEBUG_STIH418_SBC_ASC0
+	default "debug/stm32.S" if DEBUG_STM32_UART
 	default "debug/tegra.S" if DEBUG_TEGRA_UART
 	default "debug/ux500.S" if DEBUG_UX500_UART
 	default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT
 	default "debug/vf.S" if DEBUG_VF_UART
 	default "debug/vt8500.S" if DEBUG_VT8500_UART0
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
-	default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART
+	default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART || DEBUG_BCMBCA
 	default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
 	default "debug/brcmstb.S" if DEBUG_BRCMSTB_UART
 	default "mach/debug-macro.S"
@@ -1474,14 +1541,10 @@ config DEBUG_UART_PL01X
 
 # Compatibility options for 8250
 config DEBUG_UART_8250
-	def_bool ARCH_EBSA110 || \
-		ARCH_IOP13XX || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || \
-		ARCH_RPC
+	def_bool ARCH_IXP4XX || ARCH_RPC
 
 config DEBUG_UART_PHYS
 	hex "Physical base address of debug UART"
-	default 0x00100a00 if DEBUG_NETX_UART
-	default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0
 	default 0x01c28000 if DEBUG_SUNXI_UART0
 	default 0x01c28400 if DEBUG_SUNXI_UART1
 	default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1
@@ -1491,7 +1554,7 @@ config DEBUG_UART_PHYS
 	default 0x02531000 if DEBUG_KEYSTONE_UART1
 	default 0x03010fe0 if ARCH_RPC
 	default 0x07000000 if DEBUG_SUN9I_UART0
-	default 0x09405000 if DEBUG_ZTE_ZX
+	default 0x09530000 if DEBUG_STIH418_SBC_ASC0
 	default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \
 				DEBUG_VEXPRESS_UART0_CA9
 	default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
@@ -1506,30 +1569,36 @@ config DEBUG_UART_PHYS
 	default 0x11006000 if DEBUG_MT6589_UART0
 	default 0x11009000 if DEBUG_MT8135_UART3
 	default 0x16000000 if DEBUG_INTEGRATOR
+	default 0x1600d000 if DEBUG_SD5203_UART
 	default 0x18000300 if DEBUG_BCM_5301X
-	default 0x18010000 if DEBUG_SIRFATLAS7_UART0
-	default 0x18020000 if DEBUG_SIRFATLAS7_UART1
+	default 0x18000400 if DEBUG_BCM_HR2
+	default 0x18023000 if DEBUG_BCM_IPROC_UART3
 	default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
+	default 0x1f221000 if DEBUG_MSTARV7_PMUART
 	default 0x20001000 if DEBUG_HIP01_UART
 	default 0x20060000 if DEBUG_RK29_UART0
 	default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
 	default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
 	default 0x20201000 if DEBUG_BCM2835
-	default 0x3f201000 if DEBUG_BCM2836
 	default 0x3e000000 if DEBUG_BCM_KONA_UART
-	default 0x4000e400 if DEBUG_LL_UART_EFM32
+	default 0x3f201000 if DEBUG_BCM2836
+	default 0x40010000 if STM32MP1_DEBUG_UART
+	default 0x40011000 if STM32F4_DEBUG_UART || STM32F7_DEBUG_UART || \
+				STM32H7_DEBUG_UART
 	default 0x40028000 if DEBUG_AT91_SAMV7_USART1
 	default 0x40081000 if DEBUG_LPC18XX_UART0
 	default 0x40090000 if DEBUG_LPC32XX
 	default 0x40100000 if DEBUG_PXA_UART1
 	default 0x42000000 if DEBUG_GEMINI
-	default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
-				DEBUG_S3C2410_UART0)
-	default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
-				DEBUG_S3C2410_UART1)
-	default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
-				DEBUG_S3C2410_UART2)
-	default 0x78000000 if DEBUG_CNS3XXX
+	default 0x44e09000 if DEBUG_AM33XXUART1
+	default 0x48020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
+	default 0x48022000 if DEBUG_TI81XXUART2
+	default 0x48024000 if DEBUG_TI81XXUART3
+	default 0x4806a000 if DEBUG_OMAP2UART1
+	default 0x4806c000 if DEBUG_OMAP2UART2
+	default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
+	default 0x49020000 if DEBUG_OMAP3UART3
+	default 0x49042000 if DEBUG_OMAP3UART4
 	default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1
 	default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
 	default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
@@ -1538,12 +1607,9 @@ config DEBUG_UART_PHYS
 	default 0x80010000 if DEBUG_ASM9260_UART
 	default 0x80070000 if DEBUG_IMX23_UART
 	default 0x80074000 if DEBUG_IMX28_UART
-	default 0x80230000 if DEBUG_PICOXCELL_UART
 	default 0x808c0000 if DEBUG_EP93XX || ARCH_EP93XX
 	default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
-	default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1
 	default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
-	default 0xc0013000 if DEBUG_U300_UART
 	default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
 	default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
 	default 0xd0000000 if DEBUG_SPEAR3XX
@@ -1552,14 +1618,20 @@ config DEBUG_UART_PHYS
 	default 0xd4017000 if DEBUG_MMP_UART2
 	default 0xd4018000 if DEBUG_MMP_UART3
 	default 0xe0000000 if DEBUG_SPEAR13XX
+	default 0xe0064200 if DEBUG_AT91_LAN966_FLEXCOM
+	default 0xe1824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
 	default 0xe4007000 if DEBUG_HIP04_UART
 	default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0
 	default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1
+	default 0xe6c60000 if DEBUG_RCAR_GEN2_SCIFA2
 	default 0xe6c80000 if DEBUG_RMOBILE_SCIFA4
 	default 0xe6e58000 if DEBUG_RCAR_GEN2_SCIF2
 	default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0
-	default 0xe8008000 if DEBUG_R7S72100_SCIF2
-	default 0xf0000be0 if ARCH_EBSA110
+	default 0xe6e68000 if DEBUG_RCAR_GEN2_SCIF1
+	default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4
+	default 0xe8008000 if DEBUG_R7S72100_SCIF2 || DEBUG_R7S9210_SCIF2
+	default 0xe8009000 if DEBUG_R7S9210_SCIF4
+	default 0xf0000000 if DEBUG_DIGICOLOR_UA0
 	default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
 	default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
@@ -1569,51 +1641,58 @@ config DEBUG_UART_PHYS
 	default 0xfc00c000 if DEBUG_AT91_SAMA5D4_USART3
 	default 0xfcb00000 if DEBUG_HI3620_UART
 	default 0xfd883000 if DEBUG_ALPINE_UART0
-	default 0xfe800000 if ARCH_IOP32X
+	default 0xfe531000 if DEBUG_STIH41X_SBC_ASC1
+	default 0xfed32000 if DEBUG_STIH41X_ASC2
 	default 0xff690000 if DEBUG_RK32_UART2
+	default 0xff800640 if DEBUG_BCMBCA
 	default 0xffc02000 if DEBUG_SOCFPGA_UART0
-	default 0xffc02100 if DEBUG_SOCFPGA_UART1
-	default 0xffd82340 if ARCH_IOP13XX
+	default 0xffc02100 if DEBUG_SOCFPGA_ARRIA10_UART1
+	default 0xffc03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
 	default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
 	default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
 	default 0xfff36000 if DEBUG_HIGHBANK_UART
-	default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
-	default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
-	default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
+	default 0xfffb0000 if DEBUG_OMAP1UART1
+	default 0xfffb0800 if DEBUG_OMAP1UART2
+	default 0xfffb9800 if DEBUG_OMAP1UART3
 	default 0xfffe8600 if DEBUG_BCM63XX_UART
 	default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU
 	default 0xfffff200 if DEBUG_AT91_RM9200_DBGU
-	default 0xfffff700 if ARCH_IOP33X
 	depends on ARCH_EP93XX || \
 	        DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
-		DEBUG_LL_UART_EFM32 || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
-		DEBUG_NETX_UART || \
 		DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
+		DEBUG_R7S9210_SCIF2 || DEBUG_R7S9210_SCIF4 || \
 		DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
-		DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
+		DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF1 || \
+		DEBUG_RCAR_GEN2_SCIF2 || DEBUG_RCAR_GEN2_SCIF4 || \
+		DEBUG_RCAR_GEN2_SCIFA2 || \
 		DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
-		DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
+		DEBUG_RMOBILE_SCIFA4 || \
 		DEBUG_S3C64XX_UART || \
-		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
-		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
-		DEBUG_AT91_UART
+		DEBUG_BCM63XX_UART || DEBUG_BCMBCA || DEBUG_ASM9260_UART || \
+		DEBUG_DIGICOLOR_UA0 || \
+		DEBUG_AT91_UART || DEBUG_STM32_UART || \
+		DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
+		DEBUG_STIH418_SBC_ASC0
 
 config DEBUG_UART_VIRT
 	hex "Virtual base address of debug UART"
 	default 0xc881f000 if DEBUG_RV1108_UART2
 	default 0xc8821000 if DEBUG_RV1108_UART1
 	default 0xc8912000 if DEBUG_RV1108_UART0
-	default 0xe0000a00 if DEBUG_NETX_UART
 	default 0xe0010fe0 if ARCH_RPC
-	default 0xf0000be0 if ARCH_EBSA110
+	default 0xe0824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
 	default 0xf0010000 if DEBUG_ASM9260_UART
+	default 0xf0100000 if DEBUG_DIGICOLOR_UA0
 	default 0xf01fb000 if DEBUG_NOMADIK_UART
 	default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836
+	default 0xf0221000 if DEBUG_MSTARV7_PMUART
 	default 0xf1000300 if DEBUG_BCM_5301X
+	default 0xf1000400 if DEBUG_BCM_HR2
 	default 0xf1002000 if DEBUG_MT8127_UART0
 	default 0xf1006000 if DEBUG_MT6589_UART0
 	default 0xf1009000 if DEBUG_MT8135_UART3
+	default 0xf1023000 if DEBUG_BCM_IPROC_UART3
 	default 0xf11f1000 if DEBUG_VERSATILE
 	default 0xf1600000 if DEBUG_INTEGRATOR
 	default 0xf1c28000 if DEBUG_SUNXI_UART0
@@ -1625,15 +1704,9 @@ config DEBUG_UART_VIRT
 	default 0xf6200000 if DEBUG_PXA_UART1
 	default 0xf7000000 if DEBUG_SUN9I_UART0
 	default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
-	default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
-				DEBUG_S3C2410_UART0)
 	default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
 	default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
 	default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
-	default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
-				DEBUG_S3C2410_UART1)
-	default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
-				DEBUG_S3C2410_UART2)
 	default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
 	default 0xf8007000 if DEBUG_HIP04_UART
@@ -1641,84 +1714,87 @@ config DEBUG_UART_VIRT
 	default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
 	default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU
 	default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU
+	default 0xf9530000 if DEBUG_STIH418_SBC_ASC0
+	default 0xf9e09000 if DEBUG_AM33XXUART1
+	default 0xfa020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
+	default 0xfa022000 if DEBUG_TI81XXUART2
+	default 0xfa024000 if DEBUG_TI81XXUART3
+	default 0xfa06a000 if DEBUG_OMAP2UART1
+	default 0xfa06c000 if DEBUG_OMAP2UART2
+	default 0xfa06e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
 	default 0xfa71e000 if DEBUG_QCOM_UARTDM
-	default 0xfb002000 if DEBUG_CNS3XXX
 	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
 	default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
+	default 0xfb020000 if DEBUG_OMAP3UART3
+	default 0xfb042000 if DEBUG_OMAP3UART4
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
-	default 0xfc705000 if DEBUG_ZTE_ZX
 	default 0xfcfe8600 if DEBUG_BCM63XX_UART
 	default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
-	default 0xfd012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_MV78XX0
+	default 0xfd064200 if DEBUG_AT91_LAN966_FLEXCOM
+	default 0xfd531000 if DEBUG_STIH41X_SBC_ASC1
 	default 0xfd883000 if DEBUG_ALPINE_UART0
-	default 0xfde12000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_DOVE
-	default 0xfe012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_ORION5X
+	default 0xfdd32000 if DEBUG_STIH41X_ASC2
+	default 0xfe010000 if STM32MP1_DEBUG_UART
 	default 0xfe017000 if DEBUG_MMP_UART2
 	default 0xfe018000 if DEBUG_MMP_UART3
 	default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
-	default 0xfe230000 if DEBUG_PICOXCELL_UART
 	default 0xfe300000 if DEBUG_BCM_KONA_UART
-	default 0xfe800000 if ARCH_IOP32X
+	default 0xfe300640 if DEBUG_BCMBCA
 	default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART
 	default 0xfeb24000 if DEBUG_RK3X_UART0
 	default 0xfeb26000 if DEBUG_RK3X_UART1
 	default 0xfeb30c00 if DEBUG_KEYSTONE_UART0
 	default 0xfeb31000 if DEBUG_KEYSTONE_UART1
 	default 0xfec02000 if DEBUG_SOCFPGA_UART0
-	default 0xfec02100 if DEBUG_SOCFPGA_UART1
-	default 0xfec12000 if (DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE) && ARCH_MVEBU
+	default 0xfec02100 if DEBUG_SOCFPGA_ARRIA10_UART1
+	default 0xfec03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
+	default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE
 	default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE
-	default 0xfec10000 if DEBUG_SIRFATLAS7_UART0
-	default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
-	default 0xfec20000 if DEBUG_SIRFATLAS7_UART1
-	default 0xfec60000 if DEBUG_SIRFPRIMA2_UART1
 	default 0xfec90000 if DEBUG_RK32_UART2
 	default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
-	default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2
+	default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_SD5203_UART
 	default 0xfed60000 if DEBUG_RK29_UART0
 	default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
 	default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
 	default 0xfedc0000 if DEBUG_EP93XX
 	default 0xfee003f8 if DEBUG_FOOTBRIDGE_COM1
 	default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
-	default 0xfee82340 if ARCH_IOP13XX
-	default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
-	default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
+	default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
+	default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
 	default 0xfef36000 if DEBUG_HIGHBANK_UART
-	default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
-	default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
-	default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
-	default 0xfefff700 if ARCH_IOP33X
-	default 0xff003000 if DEBUG_U300_UART
+	default 0xff0b0000 if DEBUG_OMAP1UART1
+	default 0xff0b0800 if DEBUG_OMAP1UART2
+	default 0xff0b9800 if DEBUG_OMAP1UART3
 	default 0xffd01000 if DEBUG_HIP01_UART
 	default DEBUG_UART_PHYS if !MMU
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
-		DEBUG_NETX_UART || \
-		DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
+		DEBUG_QCOM_UARTDM || \
 		DEBUG_S3C64XX_UART || \
-		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
-		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
-		DEBUG_AT91_UART
+		DEBUG_BCM63XX_UART || DEBUG_BCMBCA || DEBUG_ASM9260_UART || \
+		DEBUG_DIGICOLOR_UA0 || \
+		DEBUG_AT91_UART || DEBUG_STM32_UART || \
+		DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
+		DEBUG_STIH418_SBC_ASC0
 
 config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
-	default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \
-		DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || DEBUG_OMAP7XXUART3
+	default 0 if DEBUG_FOOTBRIDGE_COM1 || DEBUG_BCM_5301X || \
+		DEBUG_BCM_HR2
+	default 3 if DEBUG_MSTARV7_PMUART
 	default 2
 
 config DEBUG_UART_8250_WORD
 	bool "Use 32-bit accesses for 8250 UART"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
 	depends on DEBUG_UART_8250_SHIFT >= 2
-	default y if DEBUG_PICOXCELL_UART || \
-		DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_UART1 || \
-		DEBUG_KEYSTONE_UART0 || DEBUG_KEYSTONE_UART1 || \
-		DEBUG_ALPINE_UART0 || \
-		DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
-		DEBUG_DAVINCI_DA8XX_UART2 || \
-		DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2
+	default y if DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \
+		DEBUG_SOCFPGA_CYCLONE5_UART1 || DEBUG_KEYSTONE_UART0 || \
+		DEBUG_KEYSTONE_UART1 || DEBUG_ALPINE_UART0 || \
+		DEBUG_DAVINCI_DA8XX_UART1 || DEBUG_DAVINCI_DA8XX_UART2 || \
+		DEBUG_BCM_IPROC_UART3 || DEBUG_BCM_KONA_UART || \
+		DEBUG_RK32_UART2
 
 config DEBUG_UART_8250_PALMCHIP
 	bool "8250 UART is Palmchip BK-310x"
@@ -1728,33 +1804,21 @@ config DEBUG_UART_8250_PALMCHIP
 	  except for having a different register layout.  Say Y here if
 	  the debug UART is of this type.
 
-config DEBUG_UART_8250_FLOW_CONTROL
-	bool "Enable flow control for 8250 UART"
-	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
-	default y if ARCH_EBSA110 || DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC
-
 config DEBUG_UNCOMPRESS
-	bool
-	depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
-	default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
+	bool "Enable decompressor debugging via DEBUG_LL output"
+	depends on !ARCH_MULTIPLATFORM
+	depends on !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
+	depends on DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
 		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \
-		     !DEBUG_BRCMSTB_UART
+		     !DEBUG_BRCMSTB_UART && !DEBUG_SEMIHOSTING
 	help
-	  This option influences the normal decompressor output for
-	  multiplatform kernels.  Normally, multiplatform kernels disable
-	  decompressor output because it is not possible to know where to
-	  send the decompressor output.
-
-	  When this option is set, the selected DEBUG_LL output method
-	  will be re-used for normal decompressor output on multiplatform
-	  kernels.
-	  
+	  Say Y here to enable debug output in the decompressor code, using
+	  the selected DEBUG_LL output method.
 
 config UNCOMPRESS_INCLUDE
 	string
-	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
-					PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
-	default "mach/uncompress.h"
+	default "mach/uncompress.h" if ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100
+	default "debug/uncompress.h"
 
 config EARLY_PRINTK
 	bool "Early printk"
@@ -1780,5 +1844,3 @@ config PID_IN_CONTEXTIDR
 	  are planning to use hardware trace tools with this kernel.
 
 source "drivers/hwtracing/coresight/Kconfig"
-
-endmenu
diff --git a/arch/arm/Kconfig.platforms b/arch/arm/Kconfig.platforms
new file mode 100644
index 000000000000..5c19c1f2cff6
--- /dev/null
+++ b/arch/arm/Kconfig.platforms
@@ -0,0 +1,208 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+menu "Platform selection"
+	depends on MMU
+
+comment "CPU Core family selection"
+
+config ARCH_MULTI_V4
+	bool "ARMv4 based platforms (FA526, StrongARM)"
+	depends on !ARCH_MULTI_V6_V7
+	# https://github.com/llvm/llvm-project/issues/50764
+	depends on !LD_IS_LLD || LLD_VERSION >= 160000
+	select ARCH_MULTI_V4_V5
+	select CPU_FA526 if !(CPU_SA110 || CPU_SA1100)
+
+config ARCH_MULTI_V4T
+	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
+	depends on !ARCH_MULTI_V6_V7
+	# https://github.com/llvm/llvm-project/issues/50764
+	depends on !LD_IS_LLD || LLD_VERSION >= 160000
+	select ARCH_MULTI_V4_V5
+	select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
+		CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
+		CPU_ARM925T || CPU_ARM940T)
+
+config ARCH_MULTI_V5
+	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
+	depends on !ARCH_MULTI_V6_V7
+	select ARCH_MULTI_V4_V5
+	select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
+		CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
+		CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
+
+config ARCH_MULTI_V4_V5
+	bool
+
+config ARCH_MULTI_V6
+	bool "ARMv6 based platforms (ARM11)"
+	select ARCH_MULTI_V6_V7
+	select CPU_V6K
+
+config ARCH_MULTI_V7
+	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
+	default y
+	select ARCH_MULTI_V6_V7
+	select CPU_V7
+	select HAVE_SMP
+
+config ARCH_MULTI_V6_V7
+	bool
+	select MIGHT_HAVE_CACHE_L2X0
+
+config ARCH_MULTI_CPU_AUTO
+	def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
+	select ARCH_MULTI_V5
+
+endmenu
+
+config ARCH_VIRT
+	bool "Dummy Virtual Machine"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GIC_V2M if PCI
+	select ARM_GIC_V3
+	select ARM_GIC_V3_ITS if PCI
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+
+config ARCH_AIROHA
+	bool "Airoha SoC Support"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GIC_V3
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+	help
+	  Support for Airoha EN7523 SoCs
+
+config MACH_ASM9260
+	bool "Alphascale ASM9260"
+	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
+	select CPU_ARM926T
+	select ASM9260_TIMER
+	help
+	  Support for Alphascale ASM9260 based platform.
+
+menuconfig ARCH_HPE
+	bool "HPE SoC support"
+	depends on ARCH_MULTI_V7
+	help
+	  This enables support for HPE ARM based BMC chips.
+
+if ARCH_HPE
+
+config ARCH_HPE_GXP
+	bool "HPE GXP SoC"
+	depends on ARCH_MULTI_V7
+	select ARM_VIC
+	select GENERIC_IRQ_CHIP
+	select CLKSRC_MMIO
+	help
+	  HPE GXP is the name of the HPE Soc. This SoC is used to implement many
+	  BMC features at HPE. It supports ARMv7 architecture based on the Cortex
+	  A9 core. It is capable of using an AXI bus to which a memory controller
+	  is attached. It has multiple SPI interfaces to connect boot flash and
+	  BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It
+	  has multiple i2c engines to drive connectivity with a host
+	  infrastructure.
+
+endif
+
+menuconfig ARCH_MOXART
+	bool "MOXA ART SoC"
+	depends on ARCH_MULTI_V4
+	depends on CPU_LITTLE_ENDIAN
+	select CPU_FA526
+	select ARM_DMA_MEM_BUFFERABLE
+	select FARADAY_FTINTC010
+	select FTTMR010_TIMER
+	select GPIOLIB
+	select PHYLIB if NETDEVICES
+	help
+	  Say Y here if you want to run your kernel on hardware with a
+	  MOXA ART SoC.
+	  The MOXA ART SoC is based on a Faraday FA526 ARMv4 32-bit
+	  192 MHz CPU with MMU and 16KB/8KB D/I-cache (UC-7112-LX).
+	  Used on models UC-7101, UC-7112/UC-7110, IA240/IA241, IA3341.
+
+if ARCH_MOXART
+
+config MACH_UC7112LX
+	bool "MOXA UC-7112-LX"
+	depends on ARCH_MOXART
+	help
+	  Say Y here if you intend to run this kernel on a MOXA
+	  UC-7112-LX embedded computer.
+
+endif
+
+config ARCH_NSPIRE
+	bool "TI-NSPIRE based"
+	depends on ARCH_MULTI_V4T
+	depends on CPU_LITTLE_ENDIAN
+	select CPU_ARM926T
+	select GENERIC_IRQ_CHIP
+	select ARM_AMBA
+	select ARM_VIC
+	select ARM_TIMER_SP804
+	select NSPIRE_TIMER
+	select POWER_RESET
+	select POWER_RESET_SYSCON
+	help
+	  This enables support for systems using the TI-NSPIRE CPU
+
+config ARCH_RDA
+	bool "RDA Micro SoCs"
+	depends on ARCH_MULTI_V7
+	select RDA_INTC
+	select RDA_TIMER
+	help
+	  This enables support for the RDA Micro 8810PL SoC family.
+
+menuconfig ARCH_SUNPLUS
+	bool "Sunplus SoCs"
+	depends on ARCH_MULTI_V7
+	help
+	  Support for Sunplus SoC family: SP7021 and succeeding SoC-based systems,
+	  such as the Banana Pi BPI-F2S development board (and derivatives).
+	  (<http://www.sinovoip.com.cn/ecp_view.asp?id=586>)
+	  (<https://tibbo.com/store/plus1.html>)
+
+if ARCH_SUNPLUS
+
+config SOC_SP7021
+	bool "Sunplus SP7021 SoC support"
+	default ARCH_SUNPLUS
+	select HAVE_ARM_ARCH_TIMER
+	select ARM_GIC
+	select ARM_PSCI
+	select PINCTRL
+	select PINCTRL_SPPCTL
+	select SERIAL_SUNPLUS if TTY
+	select SERIAL_SUNPLUS_CONSOLE if TTY
+	help
+	  Support for Sunplus SP7021 SoC. It is based on ARM 4-core
+	  Cortex-A7 with various peripherals (e.g.: I2C, SPI, SDIO,
+	  Ethernet, etc.), FPGA interface,  chip-to-chip bus.
+	  It is designed for industrial control.
+
+endif
+
+config ARCH_UNIPHIER
+	bool "Socionext UniPhier SoCs"
+	depends on ARCH_MULTI_V7
+	select ARCH_HAS_RESET_CONTROLLER
+	select ARM_AMBA
+	select ARM_GLOBAL_TIMER
+	select ARM_GIC
+	select HAVE_ARM_SCU
+	select HAVE_ARM_TWD if SMP
+	select PINCTRL
+	select RESET_CONTROLLER
+	help
+	  Support for UniPhier SoC family developed by Socionext Inc.
+	  (formerly, System LSI Business Division of Panasonic Corporation)
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 47d3a1ab08d2..b7de4b6b284c 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -10,17 +10,10 @@
 #
 # Copyright (C) 1995-2001 by Russell King
 
-# Ensure linker flags are correct
-LDFLAGS		:=
-
-LDFLAGS_vmlinux	:=-p --no-undefined -X --pic-veneer
+LDFLAGS_vmlinux	:= --no-undefined -X --pic-veneer -z norelro
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux	+= --be8
-LDFLAGS_MODULE	+= --be8
-endif
-
-ifeq ($(CONFIG_ARM_MODULE_PLTS),y)
-LDFLAGS_MODULE	+= -T $(srctree)/arch/arm/kernel/module.lds
+KBUILD_LDFLAGS_MODULE	+= --be8
 endif
 
 GZFLAGS		:=-9
@@ -29,6 +22,9 @@ GZFLAGS		:=-9
 # Never generate .eh_frame
 KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)
 
+# Disable FDPIC ABI
+KBUILD_CFLAGS	+= $(call cc-option,-mno-fdpic)
+
 # This should work on most of the modern platforms
 KBUILD_DEFCONFIG := multi_v7_defconfig
 
@@ -39,17 +35,20 @@ KBUILD_CFLAGS	+= $(call cc-option,-mno-unaligned-access)
 endif
 
 ifeq ($(CONFIG_FRAME_POINTER),y)
-KBUILD_CFLAGS	+=-fno-omit-frame-pointer -mapcs -mno-sched-prolog
+KBUILD_CFLAGS	+=-fno-omit-frame-pointer
+ifeq ($(CONFIG_CC_IS_GCC),y)
+KBUILD_CFLAGS += -mapcs -mno-sched-prolog
+endif
 endif
 
 ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
 KBUILD_CPPFLAGS	+= -mbig-endian
-AS		+= -EB
-LD		+= -EB
+CHECKFLAGS	+= -D__ARMEB__
+KBUILD_LDFLAGS	+= -EB
 else
 KBUILD_CPPFLAGS	+= -mlittle-endian
-AS		+= -EL
-LD		+= -EL
+CHECKFLAGS	+= -D__ARMEL__
+KBUILD_LDFLAGS	+= -EL
 endif
 
 #
@@ -61,50 +60,57 @@ endif
 KBUILD_CFLAGS	+= $(call cc-option,-fno-ipa-sra)
 
 # This selects which instruction set is used.
+arch-$(CONFIG_CPU_32v7M)	:=-march=armv7-m
+arch-$(CONFIG_CPU_32v7)		:=-march=armv7-a
+arch-$(CONFIG_CPU_32v6)		:=-march=armv6
+# Only override the compiler option if ARMv6. The ARMv6K extensions are
+# always available in ARMv7
+ifeq ($(CONFIG_CPU_32v6),y)
+arch-$(CONFIG_CPU_32v6K)	:=-march=armv6k
+endif
+arch-$(CONFIG_CPU_32v5)		:=-march=armv5te
+arch-$(CONFIG_CPU_32v4T)	:=-march=armv4t
+arch-$(CONFIG_CPU_32v4)		:=-march=armv4
+arch-$(CONFIG_CPU_32v3)		:=-march=armv3m
+
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes
 # testing for a specific architecture or later rather impossible.
-arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
-arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
-arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+cpp-$(CONFIG_CPU_32v7M)		:=-D__LINUX_ARM_ARCH__=7
+cpp-$(CONFIG_CPU_32v7)		:=-D__LINUX_ARM_ARCH__=7
+cpp-$(CONFIG_CPU_32v6)		:=-D__LINUX_ARM_ARCH__=6
 # Only override the compiler option if ARMv6. The ARMv6K extensions are
 # always available in ARMv7
 ifeq ($(CONFIG_CPU_32v6),y)
-arch-$(CONFIG_CPU_32v6K)	=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
+cpp-$(CONFIG_CPU_32v6K)		:=-D__LINUX_ARM_ARCH__=6
 endif
-arch-$(CONFIG_CPU_32v5)		=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
-arch-$(CONFIG_CPU_32v4T)	=-D__LINUX_ARM_ARCH__=4 -march=armv4t
-arch-$(CONFIG_CPU_32v4)		=-D__LINUX_ARM_ARCH__=4 -march=armv4
-arch-$(CONFIG_CPU_32v3)		=-D__LINUX_ARM_ARCH__=3 -march=armv3
-
-# Evaluate arch cc-option calls now
-arch-y := $(arch-y)
+cpp-$(CONFIG_CPU_32v5)		:=-D__LINUX_ARM_ARCH__=5
+cpp-$(CONFIG_CPU_32v4T)		:=-D__LINUX_ARM_ARCH__=4
+cpp-$(CONFIG_CPU_32v4)		:=-D__LINUX_ARM_ARCH__=4
+cpp-$(CONFIG_CPU_32v3)		:=-D__LINUX_ARM_ARCH__=3
 
 # This selects how we optimise for the processor.
-tune-$(CONFIG_CPU_ARM7TDMI)	=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM720T)	=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM740T)	=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM9TDMI)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM940T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946E)	=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
-tune-$(CONFIG_CPU_ARM920T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM922T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM925T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM926T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_FA526)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_SA110)	=-mtune=strongarm110
-tune-$(CONFIG_CPU_SA1100)	=-mtune=strongarm1100
-tune-$(CONFIG_CPU_XSCALE)	=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_XSC3)		=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_FEROCEON)	=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
-tune-$(CONFIG_CPU_V6)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-tune-$(CONFIG_CPU_V6K)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-
-# Evaluate tune cc-option calls now
-tune-y := $(tune-y)
+tune-$(CONFIG_CPU_ARM7TDMI)	:=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM720T)	:=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM740T)	:=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM9TDMI)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM940T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM946E)	:=-mtune=arm9e
+tune-$(CONFIG_CPU_ARM920T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM922T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM925T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM926T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_FA526)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_SA110)	:=-mtune=strongarm110
+tune-$(CONFIG_CPU_SA1100)	:=-mtune=strongarm1100
+tune-$(CONFIG_CPU_XSCALE)	:=-mtune=xscale
+tune-$(CONFIG_CPU_XSC3)		:=-mtune=xscale
+tune-$(CONFIG_CPU_FEROCEON)	:=-mtune=xscale
+tune-$(CONFIG_CPU_V6)		:=-mtune=arm1136j-s
+tune-$(CONFIG_CPU_V6K)		:=-mtune=arm1136j-s
 
 ifeq ($(CONFIG_AEABI),y)
-CFLAGS_ABI	:=-mabi=aapcs-linux -mno-thumb-interwork -mfpu=vfp
+CFLAGS_ABI	:=-mabi=aapcs-linux -mfpu=vfp
 else
 CFLAGS_ABI	:=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,)
 endif
@@ -113,40 +119,55 @@ ifeq ($(CONFIG_ARM_UNWIND),y)
 CFLAGS_ABI	+=-funwind-tables
 endif
 
-ifeq ($(CONFIG_THUMB2_KERNEL),y)
-AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it)
+ifeq ($(CONFIG_CC_IS_CLANG),y)
+CFLAGS_ABI	+= -meabi gnu
+endif
+
+ifeq ($(CONFIG_CURRENT_POINTER_IN_TPIDRURO),y)
+KBUILD_CFLAGS	+= -mtp=cp15
+endif
+
+# Accept old syntax despite ".syntax unified"
 AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
-CFLAGS_ISA	:=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
+
+# The GCC option -ffreestanding is required in order to compile code containing
+# ARM/NEON intrinsics in a non C99-compliant environment (such as the kernel)
+CC_FLAGS_FPU	:= -ffreestanding
+# Enable <arm_neon.h>
+CC_FLAGS_FPU	+= -isystem $(shell $(CC) -print-file-name=include)
+CC_FLAGS_FPU	+= -march=armv7-a -mfloat-abi=softfp -mfpu=neon
+
+ifeq ($(CONFIG_THUMB2_KERNEL),y)
+CFLAGS_ISA	:=-Wa,-mimplicit-it=always $(AFLAGS_NOWARN)
 AFLAGS_ISA	:=$(CFLAGS_ISA) -Wa$(comma)-mthumb
-# Work around buggy relocation from gas if requested:
-ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y)
-CFLAGS_MODULE	+=-fno-optimize-sibling-calls
-endif
+CFLAGS_ISA	+=-mthumb
 else
-CFLAGS_ISA	:=$(call cc-option,-marm,)
+CFLAGS_ISA	:=$(call cc-option,-marm,) $(AFLAGS_NOWARN)
 AFLAGS_ISA	:=$(CFLAGS_ISA)
 endif
 
 # Need -Uarm for gcc < 3.x
+KBUILD_CPPFLAGS	+=$(cpp-y)
 KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
+KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) -Wa,$(arch-y) $(tune-y) -include $(srctree)/arch/arm/include/asm/unified.h -msoft-float
+KBUILD_RUSTFLAGS += --target=arm-unknown-linux-gnueabi
 
 CHECKFLAGS	+= -D__arm__
 
-#Default value
-head-y		:= arch/arm/kernel/head$(MMUEXT).o
-
 # Text offset. This list is sorted numerically by address in order to
 # provide a means to avoid/resolve conflicts in multi-arch kernels.
+# Note: the 32kB below this value is reserved for use by the kernel
+# during boot, and this offset is critical to the functioning of
+# kexec-tools.
 textofs-y	:= 0x00008000
-# We don't want the htc bootloader to corrupt kernel during resume
-textofs-$(CONFIG_PM_H1940)      := 0x00108000
+# RTD1195 has Boot ROM at start of address space
+textofs-$(CONFIG_ARCH_REALTEK)  := 0x00108000
 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
 ifeq ($(CONFIG_ARCH_SA1100),y)
 textofs-$(CONFIG_SA1111) := 0x00208000
 endif
-textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
-textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
+textofs-$(CONFIG_ARCH_QCOM_RESERVE_SMEM) := 0x00208000
+textofs-$(CONFIG_ARCH_MESON) := 0x00208000
 textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
 
 # Machine directory name.  This list is sorted alphanumerically
@@ -154,146 +175,76 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
 machine-$(CONFIG_ARCH_ACTIONS)		+= actions
 machine-$(CONFIG_ARCH_ALPINE)		+= alpine
 machine-$(CONFIG_ARCH_ARTPEC)		+= artpec
+machine-$(CONFIG_ARCH_ASPEED)           += aspeed
 machine-$(CONFIG_ARCH_AT91)		+= at91
 machine-$(CONFIG_ARCH_AXXIA)		+= axxia
 machine-$(CONFIG_ARCH_BCM)		+= bcm
 machine-$(CONFIG_ARCH_BERLIN)		+= berlin
 machine-$(CONFIG_ARCH_CLPS711X)		+= clps711x
-machine-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx
 machine-$(CONFIG_ARCH_DAVINCI)		+= davinci
 machine-$(CONFIG_ARCH_DIGICOLOR)	+= digicolor
 machine-$(CONFIG_ARCH_DOVE)		+= dove
-machine-$(CONFIG_ARCH_EBSA110)		+= ebsa110
-machine-$(CONFIG_ARCH_EFM32)		+= efm32
-machine-$(CONFIG_ARCH_EP93XX)		+= ep93xx
 machine-$(CONFIG_ARCH_EXYNOS)		+= exynos
 machine-$(CONFIG_ARCH_FOOTBRIDGE)	+= footbridge
 machine-$(CONFIG_ARCH_GEMINI)		+= gemini
 machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
 machine-$(CONFIG_ARCH_HISI)		+= hisi
-machine-$(CONFIG_ARCH_INTEGRATOR)	+= integrator
-machine-$(CONFIG_ARCH_IOP13XX)		+= iop13xx
-machine-$(CONFIG_ARCH_IOP32X)		+= iop32x
-machine-$(CONFIG_ARCH_IOP33X)		+= iop33x
 machine-$(CONFIG_ARCH_IXP4XX)		+= ixp4xx
 machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
-machine-$(CONFIG_ARCH_KS8695)		+= ks8695
 machine-$(CONFIG_ARCH_LPC18XX)		+= lpc18xx
 machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
 machine-$(CONFIG_ARCH_MESON)		+= meson
 machine-$(CONFIG_ARCH_MMP)		+= mmp
-machine-$(CONFIG_ARCH_MPS2)		+= vexpress
-machine-$(CONFIG_ARCH_MOXART)		+= moxart
 machine-$(CONFIG_ARCH_MV78XX0)		+= mv78xx0
 machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
 machine-$(CONFIG_ARCH_MXC)		+= imx
 machine-$(CONFIG_ARCH_MEDIATEK)		+= mediatek
+machine-$(CONFIG_ARCH_MILBEAUT)		+= milbeaut
 machine-$(CONFIG_ARCH_MXS)		+= mxs
-machine-$(CONFIG_ARCH_NETX)		+= netx
+machine-$(CONFIG_ARCH_MSTARV7)		+= mstar
 machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik
-machine-$(CONFIG_ARCH_NSPIRE)		+= nspire
-machine-$(CONFIG_ARCH_OXNAS)		+= oxnas
+machine-$(CONFIG_ARCH_NPCM)		+= npcm
 machine-$(CONFIG_ARCH_OMAP1)		+= omap1
 machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap2
 machine-$(CONFIG_ARCH_ORION5X)		+= orion5x
-machine-$(CONFIG_ARCH_PICOXCELL)	+= picoxcell
 machine-$(CONFIG_ARCH_PXA)		+= pxa
 machine-$(CONFIG_ARCH_QCOM)		+= qcom
-machine-$(CONFIG_ARCH_REALVIEW)		+= realview
+machine-$(CONFIG_ARCH_REALTEK)		+= realtek
 machine-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip
 machine-$(CONFIG_ARCH_RPC)		+= rpc
-machine-$(CONFIG_ARCH_S3C24XX)		+= s3c24xx
-machine-$(CONFIG_ARCH_S3C64XX)		+= s3c64xx
+machine-$(CONFIG_PLAT_SAMSUNG)		+= s3c
 machine-$(CONFIG_ARCH_S5PV210)		+= s5pv210
 machine-$(CONFIG_ARCH_SA1100)		+= sa1100
-machine-$(CONFIG_ARCH_SHMOBILE) 	+= shmobile
-machine-$(CONFIG_ARCH_SIRF)		+= prima2
-machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
+machine-$(CONFIG_ARCH_RENESAS)	 	+= shmobile
+machine-$(CONFIG_ARCH_INTEL_SOCFPGA)	+= socfpga
 machine-$(CONFIG_ARCH_STI)		+= sti
 machine-$(CONFIG_ARCH_STM32)		+= stm32
 machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
-machine-$(CONFIG_ARCH_TANGO)		+= tango
 machine-$(CONFIG_ARCH_TEGRA)		+= tegra
-machine-$(CONFIG_ARCH_U300)		+= u300
 machine-$(CONFIG_ARCH_U8500)		+= ux500
-machine-$(CONFIG_ARCH_UNIPHIER)		+= uniphier
-machine-$(CONFIG_ARCH_VERSATILE)	+= versatile
-machine-$(CONFIG_ARCH_VEXPRESS)		+= vexpress
 machine-$(CONFIG_ARCH_VT8500)		+= vt8500
-machine-$(CONFIG_ARCH_W90X900)		+= w90x900
-machine-$(CONFIG_ARCH_ZX)		+= zx
 machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
+machine-$(CONFIG_PLAT_VERSATILE)	+= versatile
 machine-$(CONFIG_PLAT_SPEAR)		+= spear
 
-# Platform directory name.  This list is sorted alphanumerically
-# by CONFIG_* macro name.
-plat-$(CONFIG_ARCH_EXYNOS)	+= samsung
-plat-$(CONFIG_ARCH_OMAP)	+= omap
-plat-$(CONFIG_ARCH_S3C64XX)	+= samsung
-plat-$(CONFIG_ARCH_S5PV210)	+= samsung
-plat-$(CONFIG_PLAT_IOP)		+= iop
-plat-$(CONFIG_PLAT_ORION)	+= orion
-plat-$(CONFIG_PLAT_PXA)		+= pxa
-plat-$(CONFIG_PLAT_S3C24XX)	+= samsung
-plat-$(CONFIG_PLAT_VERSATILE)	+= versatile
-
-ifeq ($(CONFIG_ARCH_EBSA110),y)
-# This is what happens if you forget the IOCS16 line.
-# PCMCIA cards stop working.
-CFLAGS_3c589_cs.o :=-DISA_SIXTEEN_BIT_PERIPHERAL
-export CFLAGS_3c589_cs.o
-endif
+# legacy platforms provide their own mach/*.h headers globally,
+# these three are mutually exclusive
+machdirs-$(CONFIG_ARCH_FOOTBRIDGE)	+= arch/arm/mach-footbridge
+machdirs-$(CONFIG_ARCH_RPC)		+= arch/arm/mach-rpc
+machdirs-$(CONFIG_ARCH_SA1100)		+= arch/arm/mach-sa1100
+KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%/include,$(machdirs-y))
 
 # The byte offset of the kernel image in RAM from the start of RAM.
 TEXT_OFFSET := $(textofs-y)
 
-# The first directory contains additional information for the boot setup code
-ifneq ($(machine-y),)
-MACHINE  := arch/arm/mach-$(word 1,$(machine-y))/
-else
-MACHINE  :=
-endif
-ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y)
-MACHINE  :=
-endif
-
-machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
-platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y)))
-
-ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y)
-ifneq ($(CONFIG_ARM_SINGLE_ARMV7M),y)
-ifeq ($(KBUILD_SRC),)
-KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs))
-else
-KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
-endif
-endif
-endif
-
 export	TEXT_OFFSET GZFLAGS MMUEXT
 
-# Do we have FASTFPE?
-FASTFPE		:=arch/arm/fastfpe
-ifeq ($(FASTFPE),$(wildcard $(FASTFPE)))
-FASTFPE_OBJ	:=$(FASTFPE)/
-endif
-
-core-$(CONFIG_FPE_NWFPE)	+= arch/arm/nwfpe/
-core-$(CONFIG_FPE_FASTFPE)	+= $(FASTFPE_OBJ)
-core-$(CONFIG_VFP)		+= arch/arm/vfp/
-core-$(CONFIG_XEN)		+= arch/arm/xen/
-core-$(CONFIG_KVM_ARM_HOST) 	+= arch/arm/kvm/
-core-$(CONFIG_VDSO)		+= arch/arm/vdso/
-
 # If we have a machine-specific directory, then include it in the build.
-core-y				+= arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
-core-y				+= arch/arm/probes/
-core-y				+= arch/arm/net/
-core-y				+= arch/arm/crypto/
-core-y				+= arch/arm/firmware/
-core-y				+= $(machdirs) $(platdirs)
+core-y				+= $(patsubst %,arch/arm/mach-%/,$(machine-y))
+# For cleaning
+core-				+= $(patsubst %,arch/arm/mach-%/,$(machine-))
 
-drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
+core-$(CONFIG_PLAT_ORION)	+= arch/arm/plat-orion/
 
 libs-y				:= arch/arm/lib/ $(libs-y)
 
@@ -305,12 +256,27 @@ else
 KBUILD_IMAGE := $(boot)/zImage
 endif
 
-# Build the DT binary blobs if we have OF configured
-ifeq ($(CONFIG_USE_OF),y)
-KBUILD_DTBS := dtbs
+ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y)
+prepare: stack_protector_prepare
+ifeq ($(CONFIG_CC_HAVE_STACKPROTECTOR_TLS),y)
+stack_protector_prepare: prepare0
+	$(eval KBUILD_CFLAGS += \
+		-mstack-protector-guard=tls \
+		-mstack-protector-guard-offset=$(shell	\
+			awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}'\
+				$(objtree)/include/generated/asm-offsets.h))
+else
+stack_protector_prepare: prepare0
+	$(eval SSP_PLUGIN_CFLAGS := \
+		-fplugin-arg-arm_ssp_per_task_plugin-offset=$(shell	\
+			awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}'\
+				$(objtree)/include/generated/asm-offsets.h))
+	$(eval KBUILD_CFLAGS += $(SSP_PLUGIN_CFLAGS))
+	$(eval GCC_PLUGINS_CFLAGS += $(SSP_PLUGIN_CFLAGS))
+endif
 endif
 
-all:	$(notdir $(KBUILD_IMAGE)) $(KBUILD_DTBS)
+all:	$(notdir $(KBUILD_IMAGE))
 
 
 archheaders:
@@ -331,36 +297,22 @@ bootpImage uImage: zImage
 zImage: Image
 
 $(BOOT_TARGETS): vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 	@$(kecho) '  Kernel: $(boot)/$@ is ready'
 
+$(INSTALL_TARGETS): KBUILD_IMAGE = $(boot)/$(patsubst %install,%Image,$@)
 $(INSTALL_TARGETS):
-	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
-
-%.dtb: | scripts
-	$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@
-
-PHONY += dtbs dtbs_install
-
-dtbs: prepare scripts
-	$(Q)$(MAKE) $(build)=$(boot)/dts
-
-dtbs_install:
-	$(Q)$(MAKE) $(dtbinst)=$(boot)/dts
-
-PHONY += vdso_install
-vdso_install:
-ifeq ($(CONFIG_VDSO),y)
-	$(Q)$(MAKE) $(build)=arch/arm/vdso $@
-endif
+	$(call cmd,install)
 
-# We use MRPROPER_FILES and CLEAN_FILES now
-archclean:
-	$(Q)$(MAKE) $(clean)=$(boot)
+vdso-install-$(CONFIG_VDSO) += arch/arm/vdso/vdso.so.dbg
 
 # My testing targets (bypasses dependencies)
-bp:;	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/bootpImage
+bp:;	$(Q)$(MAKE) $(build)=$(boot) $(boot)/bootpImage
 
+include $(srctree)/scripts/Makefile.defconf
+PHONY += multi_v7_lpae_defconfig
+multi_v7_lpae_defconfig:
+	$(call merge_into_defconfig,multi_v7_defconfig,lpae)
 
 define archhelp
   echo  '* zImage        - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
@@ -369,13 +321,12 @@ define archhelp
   echo  '  uImage        - U-Boot wrapped zImage'
   echo  '  bootpImage    - Combined zImage and initial RAM disk'
   echo  '                  (supply initrd image via make variable INITRD=<path>)'
-  echo  '* dtbs          - Build device tree blobs for enabled boards'
-  echo  '  dtbs_install  - Install dtbs to $(INSTALL_DTBS_PATH)'
   echo  '  install       - Install uncompressed kernel'
   echo  '  zinstall      - Install compressed kernel'
   echo  '  uinstall      - Install U-Boot wrapped compressed kernel'
   echo  '                  Install using (your) ~/bin/$(INSTALLKERNEL) or'
   echo  '                  (distribution) /sbin/$(INSTALLKERNEL) or'
   echo  '                  install to $$(INSTALL_PATH) and run lilo'
-  echo  '  vdso_install  - Install unstripped vdso.so to $$(INSTALL_MOD_PATH)/vdso'
+  echo
+  echo  '  multi_v7_lpae_defconfig     - multi_v7_defconfig with CONFIG_ARM_LPAE enabled'
 endef
diff --git a/arch/arm/boot/.gitignore b/arch/arm/boot/.gitignore
index 3c79f85975aa..8c759326baf4 100644
--- a/arch/arm/boot/.gitignore
+++ b/arch/arm/boot/.gitignore
@@ -1,6 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
 Image
 zImage
 xipImage
 bootpImage
 uImage
-*.dtb
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 50f8d1be7fcb..ba9b9a802469 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -10,29 +10,33 @@
 #
 # Copyright (C) 1995-2002 Russell King
 #
-
 OBJCOPYFLAGS	:=-O binary -R .comment -S
 
-ifneq ($(MACHINE),)
-include $(MACHINE)/Makefile.boot
-endif
-
-# Note: the following conditions must always be true:
 #   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
-#   PARAMS_PHYS must be within 4MB of ZRELADDR
-#   INITRD_PHYS must be in RAM
-ZRELADDR    := $(zreladdr-y)
-PARAMS_PHYS := $(params_phys-y)
-INITRD_PHYS := $(initrd_phys-y)
+ifdef CONFIG_PHYS_OFFSET
+add_hex = $(shell printf 0x%x $$(( $(1) + $(2) )) )
+ZRELADDR    := $(call add_hex, $(CONFIG_PHYS_OFFSET), $(TEXT_OFFSET))
+endif
 
-export ZRELADDR INITRD_PHYS PARAMS_PHYS
+PHYS_OFFSET := $(CONFIG_PHYS_OFFSET)
+export ZRELADDR PARAMS_PHYS PHYS_OFFSET
 
 targets := Image zImage xipImage bootpImage uImage
 
 ifeq ($(CONFIG_XIP_KERNEL),y)
 
+cmd_deflate_xip_data = $(CONFIG_SHELL) -c '$(src)/deflate_xip_data.sh $< $@'
+
+ifeq ($(CONFIG_XIP_DEFLATED_DATA),y)
+quiet_cmd_mkxip = XIPZ    $@
+cmd_mkxip = $(cmd_objcopy) && $(cmd_deflate_xip_data)
+else
+quiet_cmd_mkxip = $(quiet_cmd_objcopy)
+cmd_mkxip = $(cmd_objcopy)
+endif
+
 $(obj)/xipImage: vmlinux FORCE
-	$(call if_changed,objcopy)
+	$(call if_changed,mkxip)
 	@$(kecho) '  Physical Address of xipImage: $(CONFIG_XIP_PHYS_ADDR)'
 
 $(obj)/Image $(obj)/zImage: FORCE
@@ -79,29 +83,10 @@ $(obj)/uImage:	$(obj)/zImage FORCE
 	@$(check_for_multiple_loadaddr)
 	$(call if_changed,uimage)
 
-$(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
+$(obj)/bootp/bootp: $(obj)/zImage FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/bootp $@
 
 $(obj)/bootpImage: $(obj)/bootp/bootp FORCE
 	$(call if_changed,objcopy)
 
-PHONY += initrd install zinstall uinstall
-initrd:
-	@test "$(INITRD_PHYS)" != "" || \
-	(echo This machine does not support INITRD; exit -1)
-	@test "$(INITRD)" != "" || \
-	(echo You must specify INITRD; exit -1)
-
-install:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/Image System.map "$(INSTALL_PATH)"
-
-zinstall:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/zImage System.map "$(INSTALL_PATH)"
-
-uinstall:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/uImage System.map "$(INSTALL_PATH)"
-
 subdir-	    := bootp compressed dts
diff --git a/arch/arm/boot/bootp/Makefile b/arch/arm/boot/bootp/Makefile
index 5e4acd253b30..f3443f7d7b02 100644
--- a/arch/arm/boot/bootp/Makefile
+++ b/arch/arm/boot/bootp/Makefile
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 #
 # linux/arch/arm/boot/bootp/Makefile
 #
@@ -5,9 +6,39 @@
 # architecture-specific flags and dependencies.
 #
 
-GCOV_PROFILE	:= n
+ifdef PHYS_OFFSET
+add_hex = $(shell printf 0x%x $$(( $(1) + $(2) )) )
 
-LDFLAGS_bootp	:=-p --no-undefined -X \
+# If PHYS_OFFSET is set, INITRD_PHYS and PARAMS_PHYS can be derived,
+# otherwise they must be passed on the command line.
+#
+# Note: the following conditions must always be true:
+#   PARAMS_PHYS must be within 4MB of ZRELADDR
+#   INITRD_PHYS must be in RAM
+
+PARAMS_PHYS := $(call add_hex, $(PHYS_OFFSET), 0x100)
+
+# guess an initrd location if possible
+initrd_offset-$(CONFIG_ARCH_FOOTBRIDGE)	+= 0x00800000
+initrd_offset-$(CONFIG_ARCH_SA1100)	+= 0x00800000
+initrd_offset-$(CONFIG_ARCH_RPC)	+= 0x08000000
+INITRD_OFFSET := $(initrd_offset-y)
+ifdef INITRD_OFFSET
+INITRD_PHYS := $(call add_hex, $(PHYS_OFFSET), $(INITRD_OFFSET))
+endif
+
+endif
+
+PHONY += initrd
+initrd:
+	@test "$(PARAMS_PHYS)" != "" || \
+	(echo bootpImage: You must specify PHYS_OFFSET of PARAMS_PHYS ; exit -1)
+	@test "$(INITRD_PHYS)" != "" || \
+	(echo bootpImage: You must specify INITRD_OFFSET or INITRD_PHYS ; exit -1)
+	@test "$(INITRD)" != "" || \
+	(echo bootpImage: You must specify INITRD; exit -1)
+
+LDFLAGS_bootp	:= --no-undefined -X \
 		 --defsym initrd_phys=$(INITRD_PHYS) \
 		 --defsym params_phys=$(PARAMS_PHYS) -T
 AFLAGS_initrd.o :=-DINITRD=\"$(INITRD)\"
@@ -23,6 +54,6 @@ $(obj)/bootp:	$(src)/bootp.lds $(addprefix $(obj)/,init.o kernel.o initrd.o) FOR
 
 $(obj)/kernel.o: arch/arm/boot/zImage FORCE
 
-$(obj)/initrd.o: $(INITRD) FORCE
+$(obj)/initrd.o: initrd $(INITRD) FORCE
 
 PHONY += $(INITRD)
diff --git a/arch/arm/boot/bootp/bootp.lds b/arch/arm/boot/bootp/bootp.lds
index fc54394f4340..160128186bf8 100644
--- a/arch/arm/boot/bootp/bootp.lds
+++ b/arch/arm/boot/bootp/bootp.lds
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  *  linux/arch/arm/boot/bootp/bootp.lds
  *
  *  Copyright (C) 2000-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 OUTPUT_ARCH(arm)
 ENTRY(_start)
diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S
index 78b508075161..b562da2f7040 100644
--- a/arch/arm/boot/bootp/init.S
+++ b/arch/arm/boot/bootp/init.S
@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  *  linux/arch/arm/boot/bootp/init.S
  *
  *  Copyright (C) 2000-2003 Russell King.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  *  "Header" file for splitting kernel + initrd.  Note that we pass
  *  r0 through to r3 straight through.
  *
@@ -16,7 +13,7 @@
  *  size immediately following the kernel, we could build this into
  *  a binary blob, and concatenate the zImage using the cat command.
  */
-		.section .start,#alloc,#execinstr
+		.section .start, "ax"
 		.type	_start, #function
 		.globl	_start
 
@@ -44,7 +41,7 @@ _start:		add	lr, pc, #-0x8		@ lr = current load addr
  */
 		movne	r10, #0			@ terminator
 		movne	r4, #2			@ Size of this entry (2 words)
-		stmneia	r9, {r4, r5, r10}	@ Size, ATAG_CORE, terminator
+		stmiane	r9, {r4, r5, r10}	@ Size, ATAG_CORE, terminator
 
 /*
  * find the end of the tag list, and then add an INITRD tag on the end.
diff --git a/arch/arm/boot/bootp/initrd.S b/arch/arm/boot/bootp/initrd.S
index d81ea183785c..dd3d04971c42 100644
--- a/arch/arm/boot/bootp/initrd.S
+++ b/arch/arm/boot/bootp/initrd.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 	.type	initrd_start,#object
 	.globl	initrd_start
 initrd_start:
diff --git a/arch/arm/boot/bootp/kernel.S b/arch/arm/boot/bootp/kernel.S
index b87a25c7ef88..dc6236c173d2 100644
--- a/arch/arm/boot/bootp/kernel.S
+++ b/arch/arm/boot/bootp/kernel.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 	.globl	kernel_start
 kernel_start:
 	.incbin	"arch/arm/boot/zImage"
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index 86b2f5d28240..d32f41778437 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -1,17 +1,4 @@
-ashldi3.S
-bswapsdi2.S
-font.c
-lib1funcs.S
-hyp-stub.S
+# SPDX-License-Identifier: GPL-2.0-only
 piggy_data
 vmlinux
 vmlinux.lds
-
-# borrowed libfdt files
-fdt.c
-fdt.h
-fdt_ro.c
-fdt_rw.c
-fdt_wip.c
-libfdt.h
-libfdt_internal.h
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index d50430c40045..a159120d1e42 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 #
 # linux/arch/arm/boot/compressed/Makefile
 #
@@ -6,13 +7,12 @@
 
 OBJS		=
 
-AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
 HEAD	= head.o
 OBJS	+= misc.o decompress.o
 ifeq ($(CONFIG_DEBUG_UNCOMPRESS),y)
 OBJS	+= debug.o
+AFLAGS_head.o += -DDEBUG
 endif
-FONTC	= $(srctree)/lib/fonts/font_acorn_8x8.c
 
 # string library code (-Os is enforced to keep it much smaller)
 OBJS		+= string.o
@@ -22,8 +22,6 @@ ifeq ($(CONFIG_ARM_VIRT_EXT),y)
 OBJS		+= hyp-stub.o
 endif
 
-GCOV_PROFILE		:= n
-
 #
 # Architecture dependencies
 #
@@ -64,60 +62,48 @@ ZTEXTADDR	:= 0
 ZBSSADDR	:= ALIGN(8)
 endif
 
+MALLOC_SIZE	:= 65536
+
+AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET) -DMALLOC_SIZE=$(MALLOC_SIZE)
 CPPFLAGS_vmlinux.lds := -DTEXT_START="$(ZTEXTADDR)" -DBSS_START="$(ZBSSADDR)"
+CPPFLAGS_vmlinux.lds += -DTEXT_OFFSET="$(TEXT_OFFSET)"
+CPPFLAGS_vmlinux.lds += -DMALLOC_SIZE="$(MALLOC_SIZE)"
 
 compress-$(CONFIG_KERNEL_GZIP) = gzip
-compress-$(CONFIG_KERNEL_LZO)  = lzo
-compress-$(CONFIG_KERNEL_LZMA) = lzma
-compress-$(CONFIG_KERNEL_XZ)   = xzkern
-compress-$(CONFIG_KERNEL_LZ4)  = lz4
-
-# Borrowed libfdt files for the ATAG compatibility mode
-
-libfdt		:= fdt_rw.c fdt_ro.c fdt_wip.c fdt.c
-libfdt_hdrs	:= fdt.h libfdt.h libfdt_internal.h
-
-libfdt_objs	:= $(addsuffix .o, $(basename $(libfdt)))
-
-$(addprefix $(obj)/,$(libfdt) $(libfdt_hdrs)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
-	$(call cmd,shipped)
+compress-$(CONFIG_KERNEL_LZO)  = lzo_with_size
+compress-$(CONFIG_KERNEL_LZMA) = lzma_with_size
+compress-$(CONFIG_KERNEL_XZ)   = xzkern_with_size
+compress-$(CONFIG_KERNEL_LZ4)  = lz4_with_size
 
-$(addprefix $(obj)/,$(libfdt_objs) atags_to_fdt.o): \
-	$(addprefix $(obj)/,$(libfdt_hdrs))
+libfdt_objs := fdt_rw.o fdt_ro.o fdt_wip.o fdt.o
 
 ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y)
+CFLAGS_REMOVE_atags_to_fdt.o += -Wframe-larger-than=${CONFIG_FRAME_WARN}
+CFLAGS_atags_to_fdt.o += -Wframe-larger-than=1280
 OBJS	+= $(libfdt_objs) atags_to_fdt.o
 endif
+ifeq ($(CONFIG_USE_OF),y)
+OBJS	+= $(libfdt_objs) fdt_check_mem_start.o
+endif
+
+OBJS	+= lib1funcs.o ashldi3.o bswapsdi2.o
 
 targets       := vmlinux vmlinux.lds piggy_data piggy.o \
-		 lib1funcs.o ashldi3.o bswapsdi2.o \
 		 head.o $(OBJS)
 
-clean-files += piggy_data lib1funcs.S ashldi3.S bswapsdi2.S \
-		$(libfdt) $(libfdt_hdrs) hyp-stub.S
-
 KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
 
-ifeq ($(CONFIG_FUNCTION_TRACER),y)
-ORIG_CFLAGS := $(KBUILD_CFLAGS)
-KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
-endif
-
-# -fstack-protector-strong triggers protection checks in this code,
-# but it is being used too early to link to meaningful stack_chk logic.
-nossp_flags := $(call cc-option, -fno-stack-protector)
-CFLAGS_atags_to_fdt.o := $(nossp_flags)
-CFLAGS_fdt.o := $(nossp_flags)
-CFLAGS_fdt_ro.o := $(nossp_flags)
-CFLAGS_fdt_rw.o := $(nossp_flags)
-CFLAGS_fdt_wip.o := $(nossp_flags)
-
-ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
+ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin \
+	     -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \
+	     $(DISABLE_KSTACK_ERASE) \
+	     -I$(obj)
+ccflags-remove-$(CONFIG_FUNCTION_TRACER) += -pg
 asflags-y := -DZIMAGE
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
-KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \
-		awk 'END{print $$3}')
+KBSS_SZ = $(shell echo $$(($$($(NM) vmlinux | \
+		sed -n -e 's/^\([^ ]*\) [ABD] __bss_start$$/-0x\1/p' \
+		       -e 's/^\([^ ]*\) [ABD] __bss_stop$$/+0x\1/p') )) )
 LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
 # Supply ZRELADDR to the decompressor via a linker symbol.
 ifneq ($(CONFIG_AUTO_ZRELADDR),y)
@@ -126,33 +112,17 @@ endif
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux += --be8
 endif
-# ?
-LDFLAGS_vmlinux += -p
 # Report unresolved symbol references
 LDFLAGS_vmlinux += --no-undefined
 # Delete all temporary local symbols
 LDFLAGS_vmlinux += -X
+# Report orphan sections
+ifdef CONFIG_LD_ORPHAN_WARN
+LDFLAGS_vmlinux += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL)
+endif
 # Next argument is a linker script
 LDFLAGS_vmlinux += -T
 
-# For __aeabi_uidivmod
-lib1funcs = $(obj)/lib1funcs.o
-
-$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S
-	$(call cmd,shipped)
-
-# For __aeabi_llsl
-ashldi3 = $(obj)/ashldi3.o
-
-$(obj)/ashldi3.S: $(srctree)/arch/$(SRCARCH)/lib/ashldi3.S
-	$(call cmd,shipped)
-
-# For __bswapsi2, __bswapdi2
-bswapsdi2 = $(obj)/bswapsdi2.o
-
-$(obj)/bswapsdi2.S: $(srctree)/arch/$(SRCARCH)/lib/bswapsdi2.S
-	$(call cmd,shipped)
-
 # We need to prevent any GOTOFF relocs being used with references
 # to symbols in the .bss section since we cannot relocate them
 # independently from the rest at run time.  This can be achieved by
@@ -161,10 +131,10 @@ $(obj)/bswapsdi2.S: $(srctree)/arch/$(SRCARCH)/lib/bswapsdi2.S
 # The .data section is already discarded by the linker script so no need
 # to bother about it here.
 check_for_bad_syms = \
-bad_syms=$$($(CROSS_COMPILE)nm $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \
+bad_syms=$$($(NM) $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \
 [ -z "$$bad_syms" ] || \
   ( echo "following symbols must have non local/private scope:" >&2; \
-    echo "$$bad_syms" >&2; rm -f $@; false )
+    echo "$$bad_syms" >&2; false )
 
 check_for_multiple_zreladdr = \
 if [ $(words $(ZRELADDR)) -gt 1 -a "$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \
@@ -176,8 +146,8 @@ fi
 efi-obj-$(CONFIG_EFI_STUB) := $(objtree)/drivers/firmware/efi/libstub/lib.a
 
 $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \
-		$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \
-		$(bswapsdi2) $(efi-obj-y) FORCE
+		$(addprefix $(obj)/, $(OBJS)) \
+		$(efi-obj-y) FORCE
 	@$(check_for_multiple_zreladdr)
 	$(call if_changed,ld)
 	@$(check_for_bad_syms)
@@ -188,11 +158,3 @@ $(obj)/piggy_data: $(obj)/../Image FORCE
 $(obj)/piggy.o: $(obj)/piggy_data
 
 CFLAGS_font.o := -Dstatic=
-
-$(obj)/font.c: $(FONTC)
-	$(call cmd,shipped)
-
-AFLAGS_hyp-stub.o := -Wa,-march=armv7-a
-
-$(obj)/hyp-stub.S: $(srctree)/arch/$(SRCARCH)/kernel/hyp-stub.S
-	$(call cmd,shipped)
diff --git a/arch/arm/boot/compressed/ashldi3.S b/arch/arm/boot/compressed/ashldi3.S
new file mode 100644
index 000000000000..216f82eda609
--- /dev/null
+++ b/arch/arm/boot/compressed/ashldi3.S
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* For __aeabi_llsl */
+#include "../../lib/ashldi3.S"
diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c
index 9448aa0c6686..627752f18661 100644
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -1,5 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/libfdt_env.h>
 #include <asm/setup.h>
 #include <libfdt.h>
+#include "misc.h"
 
 #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
 #define do_extend_cmdline 1
@@ -13,12 +16,13 @@ static int node_offset(void *fdt, const char *node_path)
 {
 	int offset = fdt_path_offset(fdt, node_path);
 	if (offset == -FDT_ERR_NOTFOUND)
-		offset = fdt_add_subnode(fdt, 0, node_path);
+		/* Add the node to root if not found, dropping the leading '/' */
+		offset = fdt_add_subnode(fdt, 0, node_path + 1);
 	return offset;
 }
 
 static int setprop(void *fdt, const char *node_path, const char *property,
-		   uint32_t *val_array, int size)
+		   void *val_array, int size)
 {
 	int offset = node_offset(fdt, node_path);
 	if (offset < 0)
@@ -59,7 +63,7 @@ static uint32_t get_cell_size(const void *fdt)
 {
 	int len;
 	uint32_t cell_size = 1;
-	const uint32_t *size_len =  getprop(fdt, "/", "#size-cells", &len);
+	const __be32 *size_len =  getprop(fdt, "/", "#size-cells", &len);
 
 	if (size_len)
 		cell_size = fdt32_to_cpu(*size_len);
@@ -97,10 +101,28 @@ static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
 	setprop_string(fdt, "/chosen", "bootargs", cmdline);
 }
 
+static void hex_str(char *out, uint32_t value)
+{
+	uint32_t digit;
+	int idx;
+
+	for (idx = 7; idx >= 0; idx--) {
+		digit = value >> 28;
+		value <<= 4;
+		digit &= 0xf;
+		if (digit < 10)
+			digit += '0';
+		else
+			digit += 'A'-10;
+		*out++ = digit;
+	}
+	*out = '\0';
+}
+
 /*
  * Convert and fold provided ATAGs into the provided FDT.
  *
- * REturn values:
+ * Return values:
  *    = 0 -> pretend success
  *    = 1 -> bad ATAG (may retry with another possible ATAG pointer)
  *    < 0 -> error from libfdt
@@ -110,7 +132,7 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
 	struct tag *atag = atag_list;
 	/* In the case of 64 bits memory size, need to reserve 2 cells for
 	 * address and size for each bank */
-	uint32_t mem_reg_property[2 * 2 * NR_BANKS];
+	__be32 mem_reg_property[2 * 2 * NR_BANKS];
 	int memcount = 0;
 	int ret, memsize;
 
@@ -119,7 +141,7 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
 		return 1;
 
 	/* if we get a DTB here we're done already */
-	if (*(u32 *)atag_list == fdt32_to_cpu(FDT_MAGIC))
+	if (*(__be32 *)atag_list == cpu_to_fdt32(FDT_MAGIC))
 	       return 0;
 
 	/* validate the ATAG */
@@ -158,8 +180,8 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
 				/* if memsize is 2, that means that
 				 * each data needs 2 cells of 32 bits,
 				 * so the data are 64 bits */
-				uint64_t *mem_reg_prop64 =
-					(uint64_t *)mem_reg_property;
+				__be64 *mem_reg_prop64 =
+					(__be64 *)mem_reg_property;
 				mem_reg_prop64[memcount++] =
 					cpu_to_fdt64(atag->u.mem.start);
 				mem_reg_prop64[memcount++] =
@@ -179,6 +201,11 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
 					initrd_start);
 			setprop_cell(fdt, "/chosen", "linux,initrd-end",
 					initrd_start + initrd_size);
+		} else if (atag->hdr.tag == ATAG_SERIAL) {
+			char serno[16+2];
+			hex_str(serno, atag->u.serialnr.high);
+			hex_str(serno+8, atag->u.serialnr.low);
+			setprop_string(fdt, "/", "serial-number", serno);
 		}
 	}
 
diff --git a/arch/arm/boot/compressed/big-endian.S b/arch/arm/boot/compressed/big-endian.S
index 25ab26f1c6f0..0e092c36da2f 100644
--- a/arch/arm/boot/compressed/big-endian.S
+++ b/arch/arm/boot/compressed/big-endian.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  *  linux/arch/arm/boot/compressed/big-endian.S
  *
@@ -5,7 +6,7 @@
  *  Author: Nicolas Pitre
  */
 
-	.section ".start", #alloc, #execinstr
+	.section ".start", "ax"
 
 	mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 	orr	r0, r0, #(1 << 7)	@ enable big endian mode
diff --git a/arch/arm/boot/compressed/bswapsdi2.S b/arch/arm/boot/compressed/bswapsdi2.S
new file mode 100644
index 000000000000..b2156b378c7b
--- /dev/null
+++ b/arch/arm/boot/compressed/bswapsdi2.S
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* For __bswapsi2, __bswapdi2 */
+#include "../../lib/bswapsdi2.S"
diff --git a/arch/arm/boot/compressed/debug.S b/arch/arm/boot/compressed/debug.S
index 5392ee63338f..fac40a717fcf 100644
--- a/arch/arm/boot/compressed/debug.S
+++ b/arch/arm/boot/compressed/debug.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
@@ -7,7 +8,10 @@
 
 ENTRY(putc)
 	addruart r1, r2, r3
-	waituart r3, r1
+#ifdef CONFIG_DEBUG_UART_FLOW_CONTROL
+	waituartcts r3, r1
+#endif
+	waituarttxrdy r3, r1
 	senduart r0, r1
 	busyuart r3, r1
 	mov	 pc, lr
@@ -23,7 +27,11 @@ ENTRY(putc)
 	strb	r0, [r1]
 	mov	r0, #0x03		@ SYS_WRITEC
    ARM(	svc	#0x123456	)
+#ifdef CONFIG_CPU_V7M
+ THUMB(	bkpt	#0xab		)
+#else
  THUMB(	svc	#0xab		)
+#endif
 	mov	pc, lr
 	.align	2
 1:	.word	_GLOBAL_OFFSET_TABLE_ - .
diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c
index f3a4bedd1afc..0669851394f0 100644
--- a/arch/arm/boot/compressed/decompress.c
+++ b/arch/arm/boot/compressed/decompress.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #define _LINUX_STRING_H_
 
 #include <linux/compiler.h>	/* for inline */
@@ -5,10 +6,7 @@
 #include <linux/stddef.h>	/* for NULL */
 #include <linux/linkage.h>
 #include <asm/string.h>
-
-extern unsigned long free_mem_ptr;
-extern unsigned long free_mem_end_ptr;
-extern void error(char *);
+#include "misc.h"
 
 #define STATIC static
 #define STATIC_RW_DATA	/* non-static please */
@@ -33,7 +31,9 @@ extern void error(char *);
 /* Not needed, but used in some headers pulled in by decompressors */
 extern char * strstr(const char * s1, const char *s2);
 extern size_t strlen(const char *s);
+extern int strcmp(const char *cs, const char *ct);
 extern int memcmp(const void *cs, const void *ct, size_t count);
+extern char * strchrnul(const char *, int);
 
 #ifdef CONFIG_KERNEL_GZIP
 #include "../../../../lib/decompress_inflate.c"
@@ -48,7 +48,10 @@ extern int memcmp(const void *cs, const void *ct, size_t count);
 #endif
 
 #ifdef CONFIG_KERNEL_XZ
+/* Prevent KASAN override of string helpers in decompressor */
+#undef memmove
 #define memmove memmove
+#undef memcpy
 #define memcpy memcpy
 #include "../../../../lib/decompress_unxz.c"
 #endif
diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S
index a17ca8d78656..65a3025c0e13 100644
--- a/arch/arm/boot/compressed/efi-header.S
+++ b/arch/arm/boot/compressed/efi-header.S
@@ -1,24 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Copyright (C) 2013-2015 Linaro Ltd
+ * Copyright (C) 2013-2017 Linaro Ltd
  * Authors: Roy Franz <roy.franz@linaro.org>
  *          Ard Biesheuvel <ard.biesheuvel@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
+#include <linux/pe.h>
+#include <linux/sizes.h>
+
 		.macro	__nop
-#ifdef CONFIG_EFI_STUB
-		@ This is almost but not quite a NOP, since it does clobber the
-		@ condition flags. But it is the best we can do for EFI, since
-		@ PE/COFF expects the magic string "MZ" at offset 0, while the
-		@ ARM/Linux boot protocol expects an executable instruction
-		@ there.
-		.inst	'M' | ('Z' << 8) | (0x1310 << 16)   @ tstne r0, #0x4d000
-#else
  AR_CLASS(	mov	r0, r0		)
   M_CLASS(	nop.w			)
+		.endm
+
+		.macro __initial_nops
+#ifdef CONFIG_EFI_STUB
+		@ This is a two-instruction NOP, which happens to bear the
+		@ PE/COFF signature "MZ" in the first two bytes, so the kernel
+		@ is accepted as an EFI binary. Booting via the UEFI stub
+		@ will not execute those instructions, but the ARM/Linux
+		@ boot protocol does, so we need some NOPs here.
+		.inst	IMAGE_DOS_SIGNATURE | (0xe225 << 16) @ eor r5, r5, 0x4d000
+		eor	r5, r5, 0x4d000			@ undo previous insn
+#else
+		__nop
+		__nop
 #endif
 		.endm
 
@@ -34,96 +40,97 @@
 		@ The only 2 fields of the MSDOS header that are used are this
 		@ PE/COFF offset, and the "MZ" bytes at offset 0x0.
 		@
-		.long	pe_header - start	@ Offset to the PE header.
+		.long	pe_header - start		@ Offset to the PE header.
 
 pe_header:
-		.ascii	"PE\0\0"
+		.long	IMAGE_NT_SIGNATURE
 
 coff_header:
-		.short	0x01c2			@ ARM or Thumb
-		.short	2			@ nr_sections
-		.long	0 			@ TimeDateStamp
-		.long	0			@ PointerToSymbolTable
-		.long	1			@ NumberOfSymbols
-		.short	section_table - optional_header
-						@ SizeOfOptionalHeader
-		.short	0x306			@ Characteristics.
-						@ IMAGE_FILE_32BIT_MACHINE |
-						@ IMAGE_FILE_DEBUG_STRIPPED |
-						@ IMAGE_FILE_EXECUTABLE_IMAGE |
-						@ IMAGE_FILE_LINE_NUMS_STRIPPED
+		.short	IMAGE_FILE_MACHINE_THUMB	@ Machine
+		.short	section_count			@ NumberOfSections
+		.long	0 				@ TimeDateStamp
+		.long	0				@ PointerToSymbolTable
+		.long	0				@ NumberOfSymbols
+		.short	section_table - optional_header	@ SizeOfOptionalHeader
+		.short	IMAGE_FILE_32BIT_MACHINE | \
+			IMAGE_FILE_DEBUG_STRIPPED | \
+			IMAGE_FILE_EXECUTABLE_IMAGE | \
+			IMAGE_FILE_LINE_NUMS_STRIPPED	@ Characteristics
+
+#define __pecoff_code_size (__pecoff_data_start - __efi_start)
 
 optional_header:
-		.short	0x10b			@ PE32 format
-		.byte	0x02			@ MajorLinkerVersion
-		.byte	0x14			@ MinorLinkerVersion
-		.long	_end - __efi_start	@ SizeOfCode
-		.long	0			@ SizeOfInitializedData
-		.long	0			@ SizeOfUninitializedData
-		.long	efi_stub_entry - start	@ AddressOfEntryPoint
-		.long	start_offset		@ BaseOfCode
-		.long	0			@ data
+		.short	IMAGE_NT_OPTIONAL_HDR32_MAGIC	@ PE32 format
+		.byte	0x02				@ MajorLinkerVersion
+		.byte	0x14				@ MinorLinkerVersion
+		.long	__pecoff_code_size		@ SizeOfCode
+		.long	__pecoff_data_size		@ SizeOfInitializedData
+		.long	0				@ SizeOfUninitializedData
+		.long	efi_pe_entry - start		@ AddressOfEntryPoint
+		.long	start_offset			@ BaseOfCode
+		.long	__pecoff_data_start - start	@ BaseOfData
 
 extra_header_fields:
-		.long	0			@ ImageBase
-		.long	0x200			@ SectionAlignment
-		.long	0x200			@ FileAlignment
-		.short	0			@ MajorOperatingSystemVersion
-		.short	0			@ MinorOperatingSystemVersion
-		.short	0			@ MajorImageVersion
-		.short	0			@ MinorImageVersion
-		.short	0			@ MajorSubsystemVersion
-		.short	0			@ MinorSubsystemVersion
-		.long	0			@ Win32VersionValue
+		.long	0				@ ImageBase
+		.long	SZ_4K				@ SectionAlignment
+		.long	SZ_512				@ FileAlignment
+		.short	0				@ MajorOsVersion
+		.short	0				@ MinorOsVersion
+		.short	LINUX_EFISTUB_MAJOR_VERSION	@ MajorImageVersion
+		.short	LINUX_EFISTUB_MINOR_VERSION	@ MinorImageVersion
+		.short	0				@ MajorSubsystemVersion
+		.short	0				@ MinorSubsystemVersion
+		.long	0				@ Win32VersionValue
 
-		.long	_end - start		@ SizeOfImage
-		.long	start_offset		@ SizeOfHeaders
-		.long	0			@ CheckSum
-		.short	0xa			@ Subsystem (EFI application)
-		.short	0			@ DllCharacteristics
-		.long	0			@ SizeOfStackReserve
-		.long	0			@ SizeOfStackCommit
-		.long	0			@ SizeOfHeapReserve
-		.long	0			@ SizeOfHeapCommit
-		.long	0			@ LoaderFlags
-		.long	0x6			@ NumberOfRvaAndSizes
+		.long	__pecoff_end - start		@ SizeOfImage
+		.long	start_offset			@ SizeOfHeaders
+		.long	0				@ CheckSum
+		.short	IMAGE_SUBSYSTEM_EFI_APPLICATION	@ Subsystem
+		.short	0				@ DllCharacteristics
+		.long	0				@ SizeOfStackReserve
+		.long	0				@ SizeOfStackCommit
+		.long	0				@ SizeOfHeapReserve
+		.long	0				@ SizeOfHeapCommit
+		.long	0				@ LoaderFlags
+		.long	(section_table - .) / 8		@ NumberOfRvaAndSizes
 
-		.quad	0			@ ExportTable
-		.quad	0			@ ImportTable
-		.quad	0			@ ResourceTable
-		.quad	0			@ ExceptionTable
-		.quad	0			@ CertificationTable
-		.quad	0			@ BaseRelocationTable
+		.quad	0				@ ExportTable
+		.quad	0				@ ImportTable
+		.quad	0				@ ResourceTable
+		.quad	0				@ ExceptionTable
+		.quad	0				@ CertificationTable
+		.quad	0				@ BaseRelocationTable
 
 section_table:
-		@
-		@ The EFI application loader requires a relocation section
-		@ because EFI applications must be relocatable. This is a
-		@ dummy section as far as we are concerned.
-		@
-		.ascii	".reloc\0\0"
-		.long	0			@ VirtualSize
-		.long	0			@ VirtualAddress
-		.long	0			@ SizeOfRawData
-		.long	0			@ PointerToRawData
-		.long	0			@ PointerToRelocations
-		.long	0			@ PointerToLineNumbers
-		.short	0			@ NumberOfRelocations
-		.short	0			@ NumberOfLineNumbers
-		.long	0x42100040		@ Characteristics
-
 		.ascii	".text\0\0\0"
-		.long	_end - __efi_start	@ VirtualSize
-		.long	__efi_start		@ VirtualAddress
-		.long	_edata - __efi_start	@ SizeOfRawData
-		.long	__efi_start		@ PointerToRawData
-		.long	0			@ PointerToRelocations
-		.long	0			@ PointerToLineNumbers
-		.short	0			@ NumberOfRelocations
-		.short	0			@ NumberOfLineNumbers
-		.long	0xe0500020		@ Characteristics
+		.long	__pecoff_code_size		@ VirtualSize
+		.long	__efi_start			@ VirtualAddress
+		.long	__pecoff_code_size		@ SizeOfRawData
+		.long	__efi_start			@ PointerToRawData
+		.long	0				@ PointerToRelocations
+		.long	0				@ PointerToLineNumbers
+		.short	0				@ NumberOfRelocations
+		.short	0				@ NumberOfLineNumbers
+		.long	IMAGE_SCN_CNT_CODE | \
+			IMAGE_SCN_MEM_READ | \
+			IMAGE_SCN_MEM_EXECUTE		@ Characteristics
+
+		.ascii	".data\0\0\0"
+		.long	__pecoff_data_size		@ VirtualSize
+		.long	__pecoff_data_start - start	@ VirtualAddress
+		.long	__pecoff_data_rawsize		@ SizeOfRawData
+		.long	__pecoff_data_start - start	@ PointerToRawData
+		.long	0				@ PointerToRelocations
+		.long	0				@ PointerToLineNumbers
+		.short	0				@ NumberOfRelocations
+		.short	0				@ NumberOfLineNumbers
+		.long	IMAGE_SCN_CNT_INITIALIZED_DATA | \
+			IMAGE_SCN_MEM_READ | \
+			IMAGE_SCN_MEM_WRITE		@ Characteristics
+
+		.set	section_count, (. - section_table) / 40
 
-		.align	9
+		.align	12
 __efi_start:
 #endif
 		.endm
diff --git a/arch/arm/boot/compressed/fdt.c b/arch/arm/boot/compressed/fdt.c
new file mode 100644
index 000000000000..f8ea7a201ab1
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fdt.c"
diff --git a/arch/arm/boot/compressed/fdt_check_mem_start.c b/arch/arm/boot/compressed/fdt_check_mem_start.c
new file mode 100644
index 000000000000..aa856567fd33
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt_check_mem_start.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/kernel.h>
+#include <linux/libfdt.h>
+#include <linux/sizes.h>
+#include "misc.h"
+
+static const void *get_prop(const void *fdt, const char *node_path,
+			    const char *property, int minlen)
+{
+	const void *prop;
+	int offset, len;
+
+	offset = fdt_path_offset(fdt, node_path);
+	if (offset < 0)
+		return NULL;
+
+	prop = fdt_getprop(fdt, offset, property, &len);
+	if (!prop || len < minlen)
+		return NULL;
+
+	return prop;
+}
+
+static uint32_t get_cells(const void *fdt, const char *name)
+{
+	const fdt32_t *prop = get_prop(fdt, "/", name, sizeof(fdt32_t));
+
+	if (!prop) {
+		/* default */
+		return 1;
+	}
+
+	return fdt32_ld(prop);
+}
+
+static uint64_t get_val(const fdt32_t *cells, uint32_t ncells)
+{
+	uint64_t r;
+
+	r = fdt32_ld(cells);
+	if (ncells > 1)
+		r = (r << 32) | fdt32_ld(cells + 1);
+
+	return r;
+}
+
+/*
+ * Check the start of physical memory
+ *
+ * Traditionally, the start address of physical memory is obtained by masking
+ * the program counter.  However, this does require that this address is a
+ * multiple of 128 MiB, precluding booting Linux on platforms where this
+ * requirement is not fulfilled.
+ * Hence validate the calculated address against the memory information in the
+ * DTB, and, if out-of-range, replace it by the real start address.
+ * To preserve backwards compatibility (systems reserving a block of memory
+ * at the start of physical memory, kdump, ...), the traditional method is
+ * used if it yields a valid address, unless the "linux,usable-memory-range"
+ * property is present.
+ *
+ * Return value: start address of physical memory to use
+ */
+uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt)
+{
+	uint32_t addr_cells, size_cells, usable_base, base;
+	uint32_t fdt_mem_start = 0xffffffff;
+	const fdt32_t *usable, *reg, *endp;
+	uint64_t size, usable_end, end;
+	const char *type;
+	int offset, len;
+
+	if (!fdt)
+		return mem_start;
+
+	if (fdt_magic(fdt) != FDT_MAGIC)
+		return mem_start;
+
+	/* There may be multiple cells on LPAE platforms */
+	addr_cells = get_cells(fdt, "#address-cells");
+	size_cells = get_cells(fdt, "#size-cells");
+	if (addr_cells > 2 || size_cells > 2)
+		return mem_start;
+
+	/*
+	 * Usable memory in case of a crash dump kernel
+	 * This property describes a limitation: memory within this range is
+	 * only valid when also described through another mechanism
+	 */
+	usable = get_prop(fdt, "/chosen", "linux,usable-memory-range",
+			  (addr_cells + size_cells) * sizeof(fdt32_t));
+	if (usable) {
+		size = get_val(usable + addr_cells, size_cells);
+		if (!size)
+			return mem_start;
+
+		if (addr_cells > 1 && fdt32_ld(usable)) {
+			/* Outside 32-bit address space */
+			return mem_start;
+		}
+
+		usable_base = fdt32_ld(usable + addr_cells - 1);
+		usable_end = usable_base + size;
+	}
+
+	/* Walk all memory nodes and regions */
+	for (offset = fdt_next_node(fdt, -1, NULL); offset >= 0;
+	     offset = fdt_next_node(fdt, offset, NULL)) {
+		type = fdt_getprop(fdt, offset, "device_type", NULL);
+		if (!type || strcmp(type, "memory"))
+			continue;
+
+		reg = fdt_getprop(fdt, offset, "linux,usable-memory", &len);
+		if (!reg)
+			reg = fdt_getprop(fdt, offset, "reg", &len);
+		if (!reg)
+			continue;
+
+		for (endp = reg + (len / sizeof(fdt32_t));
+		     endp - reg >= addr_cells + size_cells;
+		     reg += addr_cells + size_cells) {
+			size = get_val(reg + addr_cells, size_cells);
+			if (!size)
+				continue;
+
+			if (addr_cells > 1 && fdt32_ld(reg)) {
+				/* Outside 32-bit address space, skipping */
+				continue;
+			}
+
+			base = fdt32_ld(reg + addr_cells - 1);
+			end = base + size;
+			if (usable) {
+				/*
+				 * Clip to usable range, which takes precedence
+				 * over mem_start
+				 */
+				if (base < usable_base)
+					base = usable_base;
+
+				if (end > usable_end)
+					end = usable_end;
+
+				if (end <= base)
+					continue;
+			} else if (mem_start >= base && mem_start < end) {
+				/* Calculated address is valid, use it */
+				return mem_start;
+			}
+
+			if (base < fdt_mem_start)
+				fdt_mem_start = base;
+		}
+	}
+
+	if (fdt_mem_start == 0xffffffff) {
+		/* No usable memory found, falling back to default */
+		return mem_start;
+	}
+
+	/*
+	 * The calculated address is not usable, or was overridden by the
+	 * "linux,usable-memory-range" property.
+	 * Use the lowest usable physical memory address from the DTB instead,
+	 * and make sure this is a multiple of 2 MiB for phys/virt patching.
+	 */
+	return round_up(fdt_mem_start, SZ_2M);
+}
diff --git a/arch/arm/boot/compressed/fdt_ro.c b/arch/arm/boot/compressed/fdt_ro.c
new file mode 100644
index 000000000000..93970a4ad5ae
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt_ro.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fdt_ro.c"
diff --git a/arch/arm/boot/compressed/fdt_rw.c b/arch/arm/boot/compressed/fdt_rw.c
new file mode 100644
index 000000000000..f7c6b8b7e01c
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt_rw.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fdt_rw.c"
diff --git a/arch/arm/boot/compressed/fdt_wip.c b/arch/arm/boot/compressed/fdt_wip.c
new file mode 100644
index 000000000000..048d2c7a088d
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt_wip.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fdt_wip.c"
diff --git a/arch/arm/boot/compressed/font.c b/arch/arm/boot/compressed/font.c
new file mode 100644
index 000000000000..46a677649db4
--- /dev/null
+++ b/arch/arm/boot/compressed/font.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fonts/font_acorn_8x8.c"
diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S
index 3115e313d9f6..23eae1a65064 100644
--- a/arch/arm/boot/compressed/head-sa1100.S
+++ b/arch/arm/boot/compressed/head-sa1100.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /* 
  * linux/arch/arm/boot/compressed/head-sa1100.S
  * 
@@ -19,10 +20,6 @@ __SA1100_start:
 #ifdef CONFIG_SA1100_COLLIE
 		mov	r7, #MACH_TYPE_COLLIE
 #endif
-#ifdef CONFIG_SA1100_SIMPAD
-		@ UNTIL we've something like an open bootldr
-		mov	r7, #MACH_TYPE_SIMPAD	@should be 87
-#endif
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		ands	r0, r0, #0x0d
 		beq	99f
diff --git a/arch/arm/boot/compressed/head-sharpsl.S b/arch/arm/boot/compressed/head-sharpsl.S
index eb0084ea1ec4..992e784500fa 100644
--- a/arch/arm/boot/compressed/head-sharpsl.S
+++ b/arch/arm/boot/compressed/head-sharpsl.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * linux/arch/arm/boot/compressed/head-sharpsl.S
  *
diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S
index 6ab0599c02dd..20fa44d59f82 100644
--- a/arch/arm/boot/compressed/head-xscale.S
+++ b/arch/arm/boot/compressed/head-xscale.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * linux/arch/arm/boot/compressed/head-xscale.S
  *
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 8a756870c238..9f406e9c0ea6 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  *  linux/arch/arm/boot/compressed/head.S
  *
  *  Copyright (C) 1996-2002 Russell King
  *  Copyright (C) 2004 Hyok S. Choi (MPU support)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
@@ -14,6 +11,12 @@
 
 #include "efi-header.S"
 
+#ifdef __ARMEB__
+#define OF_DT_MAGIC 0xd00dfeed
+#else
+#define OF_DT_MAGIC 0xedfe0dd0
+#endif
+
  AR_CLASS(	.arch	armv7-a	)
  M_CLASS(	.arch	armv7-m	)
 
@@ -29,21 +32,21 @@
 #if defined(CONFIG_DEBUG_ICEDCC)
 
 #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
-		.macro	loadsp, rb, tmp
+		.macro	loadsp, rb, tmp1, tmp2
 		.endm
-		.macro	writeb, ch, rb
+		.macro	writeb, ch, rb, tmp
 		mcr	p14, 0, \ch, c0, c5, 0
 		.endm
 #elif defined(CONFIG_CPU_XSCALE)
-		.macro	loadsp, rb, tmp
+		.macro	loadsp, rb, tmp1, tmp2
 		.endm
-		.macro	writeb, ch, rb
+		.macro	writeb, ch, rb, tmp
 		mcr	p14, 0, \ch, c8, c0, 0
 		.endm
 #else
-		.macro	loadsp, rb, tmp
+		.macro	loadsp, rb, tmp1, tmp2
 		.endm
-		.macro	writeb, ch, rb
+		.macro	writeb, ch, rb, tmp
 		mcr	p14, 0, \ch, c1, c0, 0
 		.endm
 #endif
@@ -52,22 +55,23 @@
 
 #include CONFIG_DEBUG_LL_INCLUDE
 
-		.macro	writeb,	ch, rb
+		.macro	writeb,	ch, rb, tmp
+#ifdef CONFIG_DEBUG_UART_FLOW_CONTROL
+		waituartcts \tmp, \rb
+#endif
+		waituarttxrdy \tmp, \rb
 		senduart \ch, \rb
+		busyuart \tmp, \rb
 		.endm
 
 #if defined(CONFIG_ARCH_SA1100)
-		.macro	loadsp, rb, tmp
+		.macro	loadsp, rb, tmp1, tmp2
 		mov	\rb, #0x80000000	@ physical base address
-#ifdef CONFIG_DEBUG_LL_SER3
-		add	\rb, \rb, #0x00050000	@ Ser3
-#else
 		add	\rb, \rb, #0x00010000	@ Ser1
-#endif
 		.endm
 #else
-		.macro	loadsp,	rb, tmp
-		addruart \rb, \tmp
+		.macro	loadsp,	rb, tmp1, tmp2
+		addruart \rb, \tmp1, \tmp2
 		.endm
 #endif
 #endif
@@ -84,37 +88,93 @@
 		bl	phex
 		.endm
 
-		.macro	debug_reloc_start
+		/*
+		 * Debug kernel copy by printing the memory addresses involved
+		 */
+		.macro dbgkc, begin, end, cbegin, cend
 #ifdef DEBUG
-		kputc	#'\n'
-		kphex	r6, 8		/* processor id */
-		kputc	#':'
-		kphex	r7, 8		/* architecture id */
-#ifdef CONFIG_CPU_CP15
-		kputc	#':'
-		mrc	p15, 0, r0, c1, c0
-		kphex	r0, 8		/* control reg */
-#endif
-		kputc	#'\n'
-		kphex	r5, 8		/* decompressed kernel start */
+		kputc   #'C'
+		kputc   #':'
+		kputc   #'0'
+		kputc   #'x'
+		kphex   \begin, 8	/* Start of compressed kernel */
+		kputc	#'-'
+		kputc	#'0'
+		kputc	#'x'
+		kphex	\end, 8		/* End of compressed kernel */
 		kputc	#'-'
-		kphex	r9, 8		/* decompressed kernel end  */
 		kputc	#'>'
-		kphex	r4, 8		/* kernel execution address */
+		kputc   #'0'
+		kputc   #'x'
+		kphex   \cbegin, 8	/* Start of kernel copy */
+		kputc	#'-'
+		kputc	#'0'
+		kputc	#'x'
+		kphex	\cend, 8	/* End of kernel copy */
 		kputc	#'\n'
 #endif
 		.endm
 
-		.macro	debug_reloc_end
+		/*
+		 * Debug print of the final appended DTB location
+		 */
+		.macro dbgadtb, begin, size
 #ifdef DEBUG
-		kphex	r5, 8		/* end of kernel */
+		kputc   #'D'
+		kputc   #'T'
+		kputc   #'B'
+		kputc   #':'
+		kputc   #'0'
+		kputc   #'x'
+		kphex   \begin, 8	/* Start of appended DTB */
+		kputc	#' '
+		kputc	#'('
+		kputc	#'0'
+		kputc	#'x'
+		kphex	\size, 8	/* Size of appended DTB */
+		kputc	#')'
 		kputc	#'\n'
-		mov	r0, r4
-		bl	memdump		/* dump 256 bytes at start of kernel */
 #endif
 		.endm
 
-		.section ".start", #alloc, #execinstr
+		.macro	enable_cp15_barriers, reg
+		mrc	p15, 0, \reg, c1, c0, 0	@ read SCTLR
+		tst	\reg, #(1 << 5)		@ CP15BEN bit set?
+		bne	.L_\@
+		orr	\reg, \reg, #(1 << 5)	@ CP15 barrier instructions
+		mcr	p15, 0, \reg, c1, c0, 0	@ write SCTLR
+ ARM(		.inst   0xf57ff06f		@ v7+ isb	)
+ THUMB(		isb						)
+.L_\@:
+		.endm
+
+		/*
+		 * The kernel build system appends the size of the
+		 * decompressed kernel at the end of the compressed data
+		 * in little-endian form.
+		 */
+		.macro	get_inflated_image_size, res:req, tmp1:req, tmp2:req
+		adr	\res, .Linflated_image_size_offset
+		ldr	\tmp1, [\res]
+		add	\tmp1, \tmp1, \res	@ address of inflated image size
+
+		ldrb	\res, [\tmp1]		@ get_unaligned_le32
+		ldrb	\tmp2, [\tmp1, #1]
+		orr	\res, \res, \tmp2, lsl #8
+		ldrb	\tmp2, [\tmp1, #2]
+		ldrb	\tmp1, [\tmp1, #3]
+		orr	\res, \res, \tmp2, lsl #16
+		orr	\res, \res, \tmp1, lsl #24
+		.endm
+
+		.macro	be32tocpu, val, tmp
+#ifndef __ARMEB__
+		/* convert to little endian */
+		rev_l	\val, \tmp
+#endif
+		.endm
+
+		.section ".start", "ax"
 /*
  * sort out different calling conventions
  */
@@ -127,11 +187,24 @@
  AR_CLASS(	.arm	)
 start:
 		.type	start,#function
-		.rept	7
+		/*
+		 * These 7 nops along with the 1 nop immediately below for
+		 * !THUMB2 form 8 nops that make the compressed kernel bootable
+		 * on legacy ARM systems that were assuming the kernel in a.out
+		 * binary format. The boot loaders on these systems would
+		 * jump 32 bytes into the image to skip the a.out header.
+		 * with these 8 nops filling exactly 32 bytes, things still
+		 * work as expected on these legacy systems. Thumb2 mode keeps
+		 * 7 of the nops as it turns out that some boot loaders
+		 * were patching the initial instructions of the kernel, i.e
+		 * had started to exploit this "patch area".
+		 */
+		__initial_nops
+		.rept	5
 		__nop
 		.endr
 #ifndef CONFIG_THUMB2_KERNEL
-		mov	r0, r0
+		__nop
 #else
  AR_CLASS(	sub	pc, pc, #3	)	@ A/R: switch to Thumb2 mode
   M_CLASS(	nop.w			)	@ M: already in Thumb2 mode
@@ -143,6 +216,8 @@ start:
 		.word	_magic_start	@ absolute load/run zImage address
 		.word	_magic_end	@ zImage end address
 		.word	0x04030201	@ endianness flag
+		.word	0x45454545	@ another magic number to indicate
+		.word	_magic_table	@ additional data table
 
 		__EFI_HEADER
 1:
@@ -201,10 +276,40 @@ not_angel:
 		 * are already placing their zImage in (eg) the top 64MB
 		 * of this range.
 		 */
-		mov	r4, pc
-		and	r4, r4, #0xf8000000
+		mov	r0, pc
+		and	r0, r0, #0xf8000000
+#ifdef CONFIG_USE_OF
+		adr	r1, LC1
+#ifdef CONFIG_ARM_APPENDED_DTB
+		/*
+		 * Look for an appended DTB.  If found, we cannot use it to
+		 * validate the calculated start of physical memory, as its
+		 * memory nodes may need to be augmented by ATAGS stored at
+		 * an offset from the same start of physical memory.
+		 */
+		ldr	r2, [r1, #4]	@ get &_edata
+		add	r2, r2, r1	@ relocate it
+		ldr	r2, [r2]	@ get DTB signature
+		ldr	r3, =OF_DT_MAGIC
+		cmp	r2, r3		@ do we have a DTB there?
+		beq	1f		@ if yes, skip validation
+#endif /* CONFIG_ARM_APPENDED_DTB */
+
+		/*
+		 * Make sure we have some stack before calling C code.
+		 * No GOT fixup has occurred yet, but none of the code we're
+		 * about to call uses any global variables.
+		 */
+		ldr	sp, [r1]	@ get stack location
+		add	sp, sp, r1	@ apply relocation
+
+		/* Validate calculated start against passed DTB */
+		mov	r1, r8
+		bl	fdt_check_mem_start
+1:
+#endif /* CONFIG_USE_OF */
 		/* Determine final kernel image address. */
-		add	r4, r4, #TEXT_OFFSET
+		add	r4, r0, #TEXT_OFFSET
 #else
 		ldr	r4, =zreladdr
 #endif
@@ -217,41 +322,23 @@ not_angel:
 		 */
 		mov	r0, pc
 		cmp	r0, r4
-		ldrcc	r0, LC0+32
+		ldrcc	r0, .Lheadroom
 		addcc	r0, r0, pc
 		cmpcc	r4, r0
 		orrcc	r4, r4, #1		@ remember we skipped cache_on
 		blcs	cache_on
 
-restart:	adr	r0, LC0
-		ldmia	r0, {r1, r2, r3, r6, r10, r11, r12}
-		ldr	sp, [r0, #28]
-
-		/*
-		 * We might be running at a different address.  We need
-		 * to fix up various pointers.
-		 */
-		sub	r0, r0, r1		@ calculate the delta offset
-		add	r6, r6, r0		@ _edata
-		add	r10, r10, r0		@ inflated kernel size location
+restart:	adr	r0, LC1
+		ldr	sp, [r0]
+		ldr	r6, [r0, #4]
+		add	sp, sp, r0
+		add	r6, r6, r0
 
-		/*
-		 * The kernel build system appends the size of the
-		 * decompressed kernel at the end of the compressed data
-		 * in little-endian form.
-		 */
-		ldrb	r9, [r10, #0]
-		ldrb	lr, [r10, #1]
-		orr	r9, r9, lr, lsl #8
-		ldrb	lr, [r10, #2]
-		ldrb	r10, [r10, #3]
-		orr	r9, r9, lr, lsl #16
-		orr	r9, r9, r10, lsl #24
+		get_inflated_image_size	r9, r10, lr
 
 #ifndef CONFIG_ZBOOT_ROM
 		/* malloc space is above the relocated stack (64k max) */
-		add	sp, sp, r0
-		add	r10, sp, #0x10000
+		add	r10, sp, #MALLOC_SIZE
 #else
 		/*
 		 * With ZBOOT_ROM the bss/stack is non relocatable,
@@ -264,9 +351,6 @@ restart:	adr	r0, LC0
 		mov	r5, #0			@ init dtb size to 0
 #ifdef CONFIG_ARM_APPENDED_DTB
 /*
- *   r0  = delta
- *   r2  = BSS start
- *   r3  = BSS end
  *   r4  = final kernel address (possibly with LSB set)
  *   r5  = appended dtb size (still unknown)
  *   r6  = _edata
@@ -274,8 +358,6 @@ restart:	adr	r0, LC0
  *   r8  = atags/device tree pointer
  *   r9  = size of decompressed image
  *   r10 = end of this image, including  bss/stack/malloc space if non XIP
- *   r11 = GOT start
- *   r12 = GOT end
  *   sp  = stack pointer
  *
  * if there are device trees (dtb) appended to zImage, advance r10 so that the
@@ -283,11 +365,7 @@ restart:	adr	r0, LC0
  */
 
 		ldr	lr, [r6, #0]
-#ifndef __ARMEB__
-		ldr	r1, =0xedfe0dd0		@ sig is 0xd00dfeed big endian
-#else
-		ldr	r1, =0xd00dfeed
-#endif
+		ldr	r1, =OF_DT_MAGIC
 		cmp	lr, r1
 		bne	dtb_check_done		@ not found
 
@@ -303,13 +381,8 @@ restart:	adr	r0, LC0
 
 		/* Get the initial DTB size */
 		ldr	r5, [r6, #4]
-#ifndef __ARMEB__
-		/* convert to little endian */
-		eor	r1, r5, r5, ror #16
-		bic	r1, r1, #0x00ff0000
-		mov	r5, r5, ror #8
-		eor	r5, r5, r1, lsr #8
-#endif
+		be32tocpu r5, r1
+		dbgadtb	r6, r5
 		/* 50% DTB growth should be good enough */
 		add	r5, r5, r5, lsr #1
 		/* preserve 64-bit alignment */
@@ -323,7 +396,6 @@ restart:	adr	r0, LC0
 		/* temporarily relocate the stack past the DTB work space */
 		add	sp, sp, r5
 
-		stmfd	sp!, {r0-r3, ip, lr}
 		mov	r0, r8
 		mov	r1, r6
 		mov	r2, r5
@@ -342,7 +414,6 @@ restart:	adr	r0, LC0
 		mov	r2, r5
 		bleq	atags_to_fdt
 
-		ldmfd	sp!, {r0-r3, ip, lr}
 		sub	sp, sp, r5
 #endif
 
@@ -362,13 +433,7 @@ restart:	adr	r0, LC0
 
 		/* Get the current DTB size */
 		ldr	r5, [r6, #4]
-#ifndef __ARMEB__
-		/* convert r5 (dtb size) to little endian */
-		eor	r1, r5, r5, ror #16
-		bic	r1, r1, #0x00ff0000
-		mov	r5, r5, ror #8
-		eor	r5, r5, r1, lsr #8
-#endif
+		be32tocpu r5, r1
 
 		/* preserve 64-bit alignment */
 		add	r5, r5, #7
@@ -427,15 +492,10 @@ dtb_check_done:
 
 		/*
 		 * Compute the address of the hyp vectors after relocation.
-		 * This requires some arithmetic since we cannot directly
-		 * reference __hyp_stub_vectors in a PC-relative way.
 		 * Call __hyp_set_vectors with the new address so that we
 		 * can HVC again after the copy.
 		 */
-0:		adr	r0, 0b
-		movw	r1, #:lower16:__hyp_stub_vectors - 0b
-		movt	r1, #:upper16:__hyp_stub_vectors - 0b
-		add	r0, r0, r1
+		adr_l	r0, __hyp_stub_vectors
 		sub	r0, r0, r5
 		add	r0, r0, r10
 		bl	__hyp_set_vectors
@@ -448,6 +508,20 @@ dtb_check_done:
 		add	r6, r9, r5
 		add	r9, r9, r10
 
+#ifdef DEBUG
+		sub     r10, r6, r5
+		sub     r10, r9, r10
+		/*
+		 * We are about to copy the kernel to a new memory area.
+		 * The boundaries of the new memory area can be found in
+		 * r10 and r9, whilst r5 and r6 contain the boundaries
+		 * of the memory we are going to copy.
+		 * Calling dbgkc will help with the printing of this
+		 * information.
+		 */
+		dbgkc	r5, r6, r10, r9
+#endif
+
 1:		ldmdb	r6!, {r0 - r3, r10 - r12, lr}
 		cmp	r6, r5
 		stmdb	r9!, {r0 - r3, r10 - r12, lr}
@@ -456,11 +530,8 @@ dtb_check_done:
 		/* Preserve offset to relocated code. */
 		sub	r6, r9, r6
 
-#ifndef CONFIG_ZBOOT_ROM
-		/* cache_clean_flush may use the stack, so relocate it */
-		add	sp, sp, r6
-#endif
-
+		mov	r0, r9			@ start of relocated zImage
+		add	r1, sp, r6		@ end of relocated zImage
 		bl	cache_clean_flush
 
 		badr	r0, restart
@@ -468,6 +539,10 @@ dtb_check_done:
 		mov	pc, r0
 
 wont_overwrite:
+		adr	r0, LC0
+		ldmia	r0, {r1, r2, r3, r11, r12}
+		sub	r0, r0, r1		@ calculate the delta offset
+
 /*
  * If delta is zero, we are running at the address we were linked at.
  *   r0  = delta
@@ -554,13 +629,16 @@ not_relocated:	mov	r0, #0
  */
 		mov	r0, r4
 		mov	r1, sp			@ malloc space above stack
-		add	r2, sp, #0x10000	@ 64k max
+		add	r2, sp, #MALLOC_SIZE	@ 64k max
 		mov	r3, r7
 		bl	decompress_kernel
+
+		get_inflated_image_size	r1, r2, r3
+
+		mov	r0, r4			@ start of inflated image
+		add	r1, r1, r0		@ end of inflated image
 		bl	cache_clean_flush
 		bl	cache_off
-		mov	r1, r7			@ restore architecture number
-		mov	r2, r8			@ restore atags pointer
 
 #ifdef CONFIG_ARM_VIRT_EXT
 		mrs	r0, spsr		@ Get saved CPU boot mode
@@ -568,17 +646,11 @@ not_relocated:	mov	r0, #0
 		cmp	r0, #HYP_MODE		@ if not booted in HYP mode...
 		bne	__enter_kernel		@ boot kernel directly
 
-		adr	r12, .L__hyp_reentry_vectors_offset
-		ldr	r0, [r12]
-		add	r0, r0, r12
-
+		adr_l	r0, __hyp_reentry_vectors
 		bl	__hyp_set_vectors
 		__HVC(0)			@ otherwise bounce to hyp mode
 
 		b	.			@ should never be reached
-
-		.align	2
-.L__hyp_reentry_vectors_offset:	.long	__hyp_reentry_vectors - .
 #else
 		b	__enter_kernel
 #endif
@@ -588,14 +660,21 @@ not_relocated:	mov	r0, #0
 LC0:		.word	LC0			@ r1
 		.word	__bss_start		@ r2
 		.word	_end			@ r3
-		.word	_edata			@ r6
-		.word	input_data_end - 4	@ r10 (inflated size location)
 		.word	_got_start		@ r11
 		.word	_got_end		@ ip
-		.word	.L_user_stack_end	@ sp
-		.word	_end - restart + 16384 + 1024*1024
 		.size	LC0, . - LC0
 
+		.type	LC1, #object
+LC1:		.word	.L_user_stack_end - LC1	@ sp
+		.word	_edata - LC1		@ r6
+		.size	LC1, . - LC1
+
+.Lheadroom:
+		.word	_end - restart + 16384 + 1024*1024
+
+.Linflated_image_size_offset:
+		.long	(input_data_end - 4) - .
+
 #ifdef CONFIG_ARCH_RPC
 		.globl	params
 params:		ldr	r0, =0x10000100		@ params_phys for RPC
@@ -605,6 +684,24 @@ params:		ldr	r0, =0x10000100		@ params_phys for RPC
 #endif
 
 /*
+ * dcache_line_size - get the minimum D-cache line size from the CTR register
+ * on ARMv7.
+ */
+		.macro	dcache_line_size, reg, tmp
+#ifdef CONFIG_CPU_V7M
+		movw	\tmp, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_CTR
+		movt	\tmp, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_CTR
+		ldr	\tmp, [\tmp]
+#else
+		mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
+#endif
+		lsr	\tmp, \tmp, #16
+		and	\tmp, \tmp, #0xf		@ cache line size encoding
+		mov	\reg, #4			@ bytes per word
+		mov	\reg, \reg, lsl \tmp		@ actual cache line size
+		.endm
+
+/*
  * Turn on the cache.  We need to setup some page tables so that we
  * can have both the I and D caches on.
  *
@@ -768,6 +865,7 @@ __armv4_mmu_cache_on:
 		mov	pc, r12
 
 __armv7_mmu_cache_on:
+		enable_cp15_barriers	r11
 		mov	r12, lr
 #ifdef CONFIG_MMU
 		mrc	p15, 0, r11, c0, c1, 4	@ read ID_MMFR0
@@ -1090,13 +1188,11 @@ __armv4_mmu_cache_off:
 __armv7_mmu_cache_off:
 		mrc	p15, 0, r0, c1, c0
 #ifdef CONFIG_MMU
-		bic	r0, r0, #0x000d
+		bic	r0, r0, #0x0005
 #else
-		bic	r0, r0, #0x000c
+		bic	r0, r0, #0x0004
 #endif
 		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
-		mov	r12, lr
-		bl	__armv7_mmu_cache_flush
 		mov	r0, #0
 #ifdef CONFIG_MMU
 		mcr	p15, 0, r0, c8, c7, 0	@ invalidate whole TLB
@@ -1104,11 +1200,14 @@ __armv7_mmu_cache_off:
 		mcr	p15, 0, r0, c7, c5, 6	@ invalidate BTC
 		mcr	p15, 0, r0, c7, c10, 4	@ DSB
 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
-		mov	pc, r12
+		mov	pc, lr
 
 /*
  * Clean and flush the cache to maintain consistency.
  *
+ * On entry,
+ *  r0 = start address
+ *  r1 = end address (exclusive)
  * On exit,
  *  r1, r2, r3, r9, r10, r11, r12 corrupted
  * This routine must preserve:
@@ -1117,6 +1216,7 @@ __armv7_mmu_cache_off:
 		.align	5
 cache_clean_flush:
 		mov	r3, #16
+		mov	r11, r1
 		b	call_cache_fn
 
 __armv4_mpu_cache_flush:
@@ -1157,6 +1257,7 @@ __armv6_mmu_cache_flush:
 		mov	pc, lr
 
 __armv7_mmu_cache_flush:
+		enable_cp15_barriers	r10
 		tst	r4, #1
 		bne	iflush
 		mrc	p15, 0, r10, c0, c1, 5	@ read ID_MMFR1
@@ -1166,51 +1267,16 @@ __armv7_mmu_cache_flush:
 		mcr	p15, 0, r10, c7, c14, 0	@ clean+invalidate D
 		b	iflush
 hierarchical:
-		mcr	p15, 0, r10, c7, c10, 5	@ DMB
-		stmfd	sp!, {r0-r7, r9-r11}
-		mrc	p15, 1, r0, c0, c0, 1	@ read clidr
-		ands	r3, r0, #0x7000000	@ extract loc from clidr
-		mov	r3, r3, lsr #23		@ left align loc bit field
-		beq	finished		@ if loc is 0, then no need to clean
-		mov	r10, #0			@ start clean at cache level 0
-loop1:
-		add	r2, r10, r10, lsr #1	@ work out 3x current cache level
-		mov	r1, r0, lsr r2		@ extract cache type bits from clidr
-		and	r1, r1, #7		@ mask of the bits for current cache only
-		cmp	r1, #2			@ see what cache we have at this level
-		blt	skip			@ skip if no cache, or just i-cache
-		mcr	p15, 2, r10, c0, c0, 0	@ select current cache level in cssr
-		mcr	p15, 0, r10, c7, c5, 4	@ isb to sych the new cssr&csidr
-		mrc	p15, 1, r1, c0, c0, 0	@ read the new csidr
-		and	r2, r1, #7		@ extract the length of the cache lines
-		add	r2, r2, #4		@ add 4 (line length offset)
-		ldr	r4, =0x3ff
-		ands	r4, r4, r1, lsr #3	@ find maximum number on the way size
-		clz	r5, r4			@ find bit position of way size increment
-		ldr	r7, =0x7fff
-		ands	r7, r7, r1, lsr #13	@ extract max number of the index size
-loop2:
-		mov	r9, r4			@ create working copy of max way size
-loop3:
- ARM(		orr	r11, r10, r9, lsl r5	) @ factor way and cache number into r11
- ARM(		orr	r11, r11, r7, lsl r2	) @ factor index number into r11
- THUMB(		lsl	r6, r9, r5		)
- THUMB(		orr	r11, r10, r6		) @ factor way and cache number into r11
- THUMB(		lsl	r6, r7, r2		)
- THUMB(		orr	r11, r11, r6		) @ factor index number into r11
-		mcr	p15, 0, r11, c7, c14, 2	@ clean & invalidate by set/way
-		subs	r9, r9, #1		@ decrement the way
-		bge	loop3
-		subs	r7, r7, #1		@ decrement the index
-		bge	loop2
-skip:
-		add	r10, r10, #2		@ increment cache number
-		cmp	r3, r10
-		bgt	loop1
-finished:
-		ldmfd	sp!, {r0-r7, r9-r11}
-		mov	r10, #0			@ switch back to cache level 0
-		mcr	p15, 2, r10, c0, c0, 0	@ select current cache level in cssr
+		dcache_line_size r1, r2		@ r1 := dcache min line size
+		sub	r2, r1, #1		@ r2 := line size mask
+		bic	r0, r0, r2		@ round down start to line size
+		sub	r11, r11, #1		@ end address is exclusive
+		bic	r11, r11, r2		@ round down end to line size
+0:		cmp	r0, r11			@ finished?
+		bgt	iflush
+		mcr	p15, 0, r0, c7, c14, 1	@ Dcache clean/invalidate by VA
+		add	r0, r0, r1
+		b	0b
 iflush:
 		mcr	p15, 0, r10, c7, c10, 4	@ DSB
 		mcr	p15, 0, r10, c7, c5, 0	@ invalidate I+BTB
@@ -1221,7 +1287,7 @@ iflush:
 __armv5tej_mmu_cache_flush:
 		tst	r4, #1
 		movne	pc, lr
-1:		mrc	p15, 0, r15, c7, c14, 3	@ test,clean,invalidate D cache
+1:		mrc	p15, 0, APSR_nzcv, c7, c14, 3	@ test,clean,invalidate D cache
 		bne	1b
 		mcr	p15, 0, r0, c7, c5, 0	@ flush I cache
 		mcr	p15, 0, r0, c7, c10, 4	@ drain WB
@@ -1295,11 +1361,11 @@ phex:		adr	r3, phexbuf
 		b	1b
 
 @ puts corrupts {r0, r1, r2, r3}
-puts:		loadsp	r3, r1
+puts:		loadsp	r3, r2, r1
 1:		ldrb	r2, [r0], #1
 		teq	r2, #0
 		moveq	pc, lr
-2:		writeb	r2, r3
+2:		writeb	r2, r3, r1
 		mov	r1, #0x00020000
 3:		subs	r1, r1, #1
 		bne	3b
@@ -1312,8 +1378,8 @@ puts:		loadsp	r3, r1
 @ putc corrupts {r0, r1, r2, r3}
 putc:
 		mov	r2, r0
+		loadsp	r3, r1, r0
 		mov	r0, #0
-		loadsp	r3, r1
 		b	2b
 
 @ memdump corrupts {r0, r1, r2, r3, r10, r11, r12, lr}
@@ -1353,7 +1419,11 @@ memdump:	mov	r12, r0
 __hyp_reentry_vectors:
 		W(b)	.			@ reset
 		W(b)	.			@ undef
+#ifdef CONFIG_EFI_STUB
+		W(b)	__enter_kernel_from_hyp	@ hvc from HYP
+#else
 		W(b)	.			@ svc
+#endif
 		W(b)	.			@ pabort
 		W(b)	.			@ dabort
 		W(b)	__enter_kernel		@ hyp
@@ -1363,6 +1433,8 @@ __hyp_reentry_vectors:
 
 __enter_kernel:
 		mov	r0, #0			@ must be 0
+		mov	r1, r7			@ restore architecture number
+		mov	r2, r8			@ restore atags pointer
  ARM(		mov	pc, r4		)	@ call kernel
  M_CLASS(	add	r4, r4, #1	)	@ enter in Thumb mode for M class
  THUMB(		bx	r4		)	@ entry point is always ARM for A/R classes
@@ -1370,50 +1442,87 @@ __enter_kernel:
 reloc_code_end:
 
 #ifdef CONFIG_EFI_STUB
-		.align	2
-_start:		.long	start - .
-
-ENTRY(efi_stub_entry)
-		@ allocate space on stack for passing current zImage address
-		@ and for the EFI stub to return of new entry point of
-		@ zImage, as EFI stub may copy the kernel. Pointer address
-		@ is passed in r2. r0 and r1 are passed through from the
-		@ EFI firmware to efi_entry
-		adr	ip, _start
-		ldr	r3, [ip]
-		add	r3, r3, ip
-		stmfd	sp!, {r3, lr}
-		mov	r2, sp			@ pass zImage address in r2
-		bl	efi_entry
-
-		@ Check for error return from EFI stub. r0 has FDT address
-		@ or error code.
-		cmn	r0, #1
-		beq	efi_load_fail
-
-		@ Preserve return value of efi_entry() in r4
-		mov	r4, r0
+__enter_kernel_from_hyp:
+		mrc	p15, 4, r0, c1, c0, 0	@ read HSCTLR
+		bic	r0, r0, #0x5		@ disable MMU and caches
+		mcr	p15, 4, r0, c1, c0, 0	@ write HSCTLR
+		isb
+		b	__enter_kernel
+
+ENTRY(efi_enter_kernel)
+		mov	r4, r0			@ preserve image base
+		mov	r8, r1			@ preserve DT pointer
+
+		adr_l	r0, call_cache_fn
+		adr	r1, 0f			@ clean the region of code we
+		bl	cache_clean_flush	@ may run with the MMU off
+
+#ifdef CONFIG_ARM_VIRT_EXT
+		@
+		@ The EFI spec does not support booting on ARM in HYP mode,
+		@ since it mandates that the MMU and caches are on, with all
+		@ 32-bit addressable DRAM mapped 1:1 using short descriptors.
+		@
+		@ While the EDK2 reference implementation adheres to this,
+		@ U-Boot might decide to enter the EFI stub in HYP mode
+		@ anyway, with the MMU and caches either on or off.
+		@
+		mrs	r0, cpsr		@ get the current mode
+		msr	spsr_cxsf, r0		@ record boot mode
+		and	r0, r0, #MODE_MASK	@ are we running in HYP mode?
+		cmp	r0, #HYP_MODE
+		bne	.Lefi_svc
+
+		mrc	p15, 4, r1, c1, c0, 0	@ read HSCTLR
+		tst	r1, #0x1		@ MMU enabled at HYP?
+		beq	1f
+
+		@
+		@ When running in HYP mode with the caches on, we're better
+		@ off just carrying on using the cached 1:1 mapping that the
+		@ firmware provided. Set up the HYP vectors so HVC instructions
+		@ issued from HYP mode take us to the correct handler code. We
+		@ will disable the MMU before jumping to the kernel proper.
+		@
+ ARM(		bic	r1, r1, #(1 << 30)	) @ clear HSCTLR.TE
+ THUMB(		orr	r1, r1, #(1 << 30)	) @ set HSCTLR.TE
+		mcr	p15, 4, r1, c1, c0, 0
+		adr	r0, __hyp_reentry_vectors
+		mcr	p15, 4, r0, c12, c0, 0	@ set HYP vector base (HVBAR)
+		isb
+		b	.Lefi_hyp
+
+		@
+		@ When running in HYP mode with the caches off, we need to drop
+		@ into SVC mode now, and let the decompressor set up its cached
+		@ 1:1 mapping as usual.
+		@
+1:		mov	r9, r4			@ preserve image base
+		bl	__hyp_stub_install	@ install HYP stub vectors
+		safe_svcmode_maskall	r1	@ drop to SVC mode
+		msr	spsr_cxsf, r0		@ record boot mode
+		orr	r4, r9, #1		@ restore image base and set LSB
+		b	.Lefi_hyp
+.Lefi_svc:
+#endif
+		mrc	p15, 0, r0, c1, c0, 0	@ read SCTLR
+		tst	r0, #0x1		@ MMU enabled?
+		orreq	r4, r4, #1		@ set LSB if not
+
+.Lefi_hyp:
+		mov	r0, r8			@ DT start
+		add	r1, r8, r2		@ DT end
 		bl	cache_clean_flush
-		bl	cache_off
 
-		@ Set parameters for booting zImage according to boot protocol
-		@ put FDT address in r2, it was returned by efi_entry()
-		@ r1 is the machine type, and r0 needs to be 0
-		mov	r0, #0
-		mov	r1, #0xFFFFFFFF
-		mov	r2, r4
-
-		@ Branch to (possibly) relocated zImage that is in [sp]
-		ldr	lr, [sp]
-		ldr	ip, =start_offset
-		add	lr, lr, ip
-		mov	pc, lr				@ no mode switch
-
-efi_load_fail:
-		@ Return EFI_LOAD_ERROR to EFI firmware on error.
-		ldr	r0, =0x80000001
-		ldmfd	sp!, {ip, pc}
-ENDPROC(efi_stub_entry)
+		adr	r0, 0f			@ switch to our stack
+		ldr	sp, [r0]
+		add	sp, sp, r0
+
+		mov	r5, #0			@ appended DTB size
+		mov	r7, #0xFFFFFFFF		@ machine ID
+		b	wont_overwrite
+ENDPROC(efi_enter_kernel)
+0:		.long	.L_user_stack_end - .
 #endif
 
 		.align
diff --git a/arch/arm/boot/compressed/hyp-stub.S b/arch/arm/boot/compressed/hyp-stub.S
new file mode 100644
index 000000000000..a703eaa86f10
--- /dev/null
+++ b/arch/arm/boot/compressed/hyp-stub.S
@@ -0,0 +1,2 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#include "../../kernel/hyp-stub.S"
diff --git a/arch/arm/boot/compressed/lib1funcs.S b/arch/arm/boot/compressed/lib1funcs.S
new file mode 100644
index 000000000000..815dec73ba4d
--- /dev/null
+++ b/arch/arm/boot/compressed/lib1funcs.S
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* For __aeabi_uidivmod */
+#include "../../lib/lib1funcs.S"
diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h
deleted file mode 100644
index 17ae0f3efac8..000000000000
--- a/arch/arm/boot/compressed/libfdt_env.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _ARM_LIBFDT_ENV_H
-#define _ARM_LIBFDT_ENV_H
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/byteorder.h>
-
-typedef __be16 fdt16_t;
-typedef __be32 fdt32_t;
-typedef __be64 fdt64_t;
-
-#define fdt16_to_cpu(x)		be16_to_cpu(x)
-#define cpu_to_fdt16(x)		cpu_to_be16(x)
-#define fdt32_to_cpu(x)		be32_to_cpu(x)
-#define cpu_to_fdt32(x)		cpu_to_be32(x)
-#define fdt64_to_cpu(x)		be64_to_cpu(x)
-#define cpu_to_fdt64(x)		cpu_to_be64(x)
-
-#endif
diff --git a/arch/arm/boot/compressed/ll_char_wr.S b/arch/arm/boot/compressed/ll_char_wr.S
index 8517c8606b4a..1ec8cb2898b1 100644
--- a/arch/arm/boot/compressed/ll_char_wr.S
+++ b/arch/arm/boot/compressed/ll_char_wr.S
@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  *  linux/arch/arm/lib/ll_char_wr.S
  *
  *  Copyright (C) 1995, 1996 Russell King.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  *  Speedups & 1bpp code (C) 1996 Philip Blundell & Russell King.
  *
  *  10-04-96	RMK	Various cleanups & reduced register usage.
@@ -75,7 +72,7 @@ Lrow4bpplp:
 	tst	r1, #7				@ avoid using r7 directly after
 	str	r7, [r0, -r5]!
 	subne	r1, r1, #1
-	ldrneb	r7, [r6, r1]
+	ldrbne	r7, [r6, r1]
 	bne	Lrow4bpplp
 	ldmfd	sp!, {r4 - r7, pc}
 
@@ -103,7 +100,7 @@ Lrow8bpplp:
 	sub	r0, r0, r5			@ avoid ip
 	stmia	r0, {r4, ip}
 	subne	r1, r1, #1
-	ldrneb	r7, [r6, r1]
+	ldrbne	r7, [r6, r1]
 	bne	Lrow8bpplp
 	ldmfd	sp!, {r4 - r7, pc}
 
diff --git a/arch/arm/boot/compressed/misc-ep93xx.h b/arch/arm/boot/compressed/misc-ep93xx.h
new file mode 100644
index 000000000000..65b4121d1490
--- /dev/null
+++ b/arch/arm/boot/compressed/misc-ep93xx.h
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ */
+
+#include <asm/mach-types.h>
+
+static inline unsigned int __raw_readl(unsigned int ptr)
+{
+	return *((volatile unsigned int *)ptr);
+}
+
+static inline void __raw_writeb(unsigned char value, unsigned int ptr)
+{
+	*((volatile unsigned char *)ptr) = value;
+}
+
+static inline void __raw_writel(unsigned int value, unsigned int ptr)
+{
+	*((volatile unsigned int *)ptr) = value;
+}
+
+/*
+ * Some bootloaders don't turn off DMA from the ethernet MAC before
+ * jumping to linux, which means that we might end up with bits of RX
+ * status and packet data scribbled over the uncompressed kernel image.
+ * Work around this by resetting the ethernet MAC before we uncompress.
+ */
+#define PHYS_ETH_SELF_CTL		0x80010020
+#define ETH_SELF_CTL_RESET		0x00000001
+
+static inline void ep93xx_ethernet_reset(void)
+{
+	unsigned int v;
+
+	/* Reset the ethernet MAC.  */
+	v = __raw_readl(PHYS_ETH_SELF_CTL);
+	__raw_writel(v | ETH_SELF_CTL_RESET, PHYS_ETH_SELF_CTL);
+
+	/* Wait for reset to finish.  */
+	while (__raw_readl(PHYS_ETH_SELF_CTL) & ETH_SELF_CTL_RESET)
+		;
+}
+
+#define TS72XX_WDT_CONTROL_PHYS_BASE	0x23800000
+#define TS72XX_WDT_FEED_PHYS_BASE	0x23c00000
+#define TS72XX_WDT_FEED_VAL		0x05
+
+static inline void __maybe_unused ts72xx_watchdog_disable(void)
+{
+	__raw_writeb(TS72XX_WDT_FEED_VAL, TS72XX_WDT_FEED_PHYS_BASE);
+	__raw_writeb(0, TS72XX_WDT_CONTROL_PHYS_BASE);
+}
+
+static inline void ep93xx_decomp_setup(void)
+{
+	if (machine_is_ts72xx())
+		ts72xx_watchdog_disable();
+
+	if (machine_is_edb9301() ||
+	    machine_is_edb9302() ||
+	    machine_is_edb9302a() ||
+	    machine_is_edb9302a() ||
+	    machine_is_edb9307() ||
+	    machine_is_edb9307a() ||
+	    machine_is_edb9307a() ||
+	    machine_is_edb9312() ||
+	    machine_is_edb9315() ||
+	    machine_is_edb9315a() ||
+	    machine_is_edb9315a() ||
+	    machine_is_ts72xx() ||
+	    machine_is_bk3() ||
+	    machine_is_vision_ep9307())
+		ep93xx_ethernet_reset();
+}
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index d4f891f56996..6c41b270560e 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * misc.c
  * 
@@ -21,9 +22,12 @@ unsigned int __machine_arch_type;
 #include <linux/compiler.h>	/* for inline */
 #include <linux/types.h>
 #include <linux/linkage.h>
+#include "misc.h"
+#ifdef CONFIG_ARCH_EP93XX
+#include "misc-ep93xx.h"
+#endif
 
 static void putstr(const char *ptr);
-extern void error(char *x);
 
 #include CONFIG_UNCOMPRESS_INCLUDE
 
@@ -99,9 +103,6 @@ static void putstr(const char *ptr)
 /*
  * gzip declarations
  */
-extern char input_data[];
-extern char input_data_end[];
-
 unsigned char *output_data;
 
 unsigned long free_mem_ptr;
@@ -127,21 +128,6 @@ asmlinkage void __div0(void)
 	error("Attempting division by 0!");
 }
 
-unsigned long __stack_chk_guard;
-
-void __stack_chk_guard_setup(void)
-{
-	__stack_chk_guard = 0x000a0dff;
-}
-
-void __stack_chk_fail(void)
-{
-	error("stack-protector: Kernel stack is corrupted\n");
-}
-
-extern int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
-
-
 void
 decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 		unsigned long free_mem_ptr_end_p,
@@ -149,13 +135,14 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 {
 	int ret;
 
-	__stack_chk_guard_setup();
-
 	output_data		= (unsigned char *)output_start;
 	free_mem_ptr		= free_mem_ptr_p;
 	free_mem_end_ptr	= free_mem_ptr_end_p;
 	__machine_arch_type	= arch_id;
 
+#ifdef CONFIG_ARCH_EP93XX
+	ep93xx_decomp_setup();
+#endif
 	arch_decomp_setup();
 
 	putstr("Uncompressing Linux...");
@@ -166,3 +153,8 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 	else
 		putstr(" done, booting the kernel.\n");
 }
+
+void __fortify_panic(const u8 reason, size_t avail, size_t size)
+{
+	error("detected buffer overflow");
+}
diff --git a/arch/arm/boot/compressed/misc.h b/arch/arm/boot/compressed/misc.h
new file mode 100644
index 000000000000..8c73940b5fe4
--- /dev/null
+++ b/arch/arm/boot/compressed/misc.h
@@ -0,0 +1,21 @@
+#ifndef MISC_H
+#define MISC_H
+
+#include <linux/compiler.h>
+
+void error(char *x) __noreturn;
+extern unsigned long free_mem_ptr;
+extern unsigned long free_mem_end_ptr;
+void __div0(void);
+void
+decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
+		  unsigned long free_mem_ptr_end_p, int arch_id);
+void __fortify_panic(const u8 reason, size_t avail, size_t size);
+int atags_to_fdt(void *atag_list, void *fdt, int total_space);
+uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt);
+int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
+
+extern char input_data[];
+extern char input_data_end[];
+
+#endif
diff --git a/arch/arm/boot/compressed/piggy.S b/arch/arm/boot/compressed/piggy.S
index f72088495f43..27577644ee72 100644
--- a/arch/arm/boot/compressed/piggy.S
+++ b/arch/arm/boot/compressed/piggy.S
@@ -1,4 +1,5 @@
-	.section .piggydata,#alloc
+/* SPDX-License-Identifier: GPL-2.0 */
+	.section .piggydata, "a"
 	.globl	input_data
 input_data:
 	.incbin	"arch/arm/boot/compressed/piggy_data"
diff --git a/arch/arm/boot/compressed/string.c b/arch/arm/boot/compressed/string.c
index 689467448736..fcc678fce045 100644
--- a/arch/arm/boot/compressed/string.c
+++ b/arch/arm/boot/compressed/string.c
@@ -1,11 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * arch/arm/boot/compressed/string.c
  *
  * Small subset of simple string routines
  */
 
+#define __NO_FORTIFY
 #include <linux/string.h>
 
+/*
+ * The decompressor is built without KASan but uses the same redirects as the
+ * rest of the kernel when CONFIG_KASAN is enabled, defining e.g. memcpy()
+ * to __memcpy() but since we are not linking with the main kernel string
+ * library in the decompressor, that will lead to link failures.
+ *
+ * Undefine KASan's versions, define the wrapped functions and alias them to
+ * the right names so that when e.g. __memcpy() appear in the code, it will
+ * still be linked to this local version of memcpy().
+ */
+#ifdef CONFIG_KASAN
+#undef memcpy
+#undef memmove
+#undef memset
+void *__memcpy(void *__dest, __const void *__src, size_t __n) __alias(memcpy);
+void *__memmove(void *__dest, __const void *__src, size_t count) __alias(memmove);
+void *__memset(void *s, int c, size_t count) __alias(memset);
+#endif
+
 void *memcpy(void *__dest, __const void *__src, size_t __n)
 {
 	int i = 0;
@@ -120,6 +141,16 @@ char *strchr(const char *s, int c)
 	return (char *)s;
 }
 
+char *strrchr(const char *s, int c)
+{
+	const char *last = NULL;
+	do {
+		if (*s == (char)c)
+			last = s;
+	} while (*s++);
+	return (char *)last;
+}
+
 #undef memset
 
 void *memset(void *s, int c, size_t count)
@@ -129,8 +160,3 @@ void *memset(void *s, int c, size_t count)
 		*xs++ = c;
 	return s;
 }
-
-void __memzero(void *s, size_t count)
-{
-	memset(s, 0, count);
-}
diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S
index 81c493156ce8..d411abd4310e 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.S
+++ b/arch/arm/boot/compressed/vmlinux.lds.S
@@ -1,10 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  *  Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
+#include <asm/vmlinux.lds.h>
 
 #ifdef CONFIG_CPU_ENDIAN_BE8
 #define ZIMAGE_MAGIC(x) ( (((x) >> 24) & 0x000000ff) | \
@@ -20,8 +18,12 @@ ENTRY(_start)
 SECTIONS
 {
   /DISCARD/ : {
+    COMMON_DISCARDS
     *(.ARM.exidx*)
     *(.ARM.extab*)
+    *(.note.*)
+    *(.rel.*)
+    *(.printk_index)
     /*
      * Discard any r/w data - this produces a link error if we have any,
      * which is required for PIC decompression.  Local data generates
@@ -39,56 +41,103 @@ SECTIONS
     *(.start)
     *(.text)
     *(.text.*)
-    *(.fixup)
-    *(.gnu.warning)
-    *(.glue_7t)
-    *(.glue_7)
+    ARM_STUBS_TEXT
+  }
+  .table : ALIGN(4) {
+    _table_start = .;
+    LONG(ZIMAGE_MAGIC(6))
+    LONG(ZIMAGE_MAGIC(0x5a534c4b))
+    LONG(ZIMAGE_MAGIC(__piggy_size_addr - _start))
+    LONG(ZIMAGE_MAGIC(_kernel_bss_size))
+    LONG(ZIMAGE_MAGIC(TEXT_OFFSET))
+    LONG(ZIMAGE_MAGIC(MALLOC_SIZE))
+    LONG(0)
+    _table_end = .;
   }
   .rodata : {
     *(.rodata)
     *(.rodata.*)
-  }
-  .data : {
-    /*
-     * The EFI stub always executes from RAM, and runs strictly before the
-     * decompressor, so we can make an exception for its r/w data, and keep it
-     */
-    *(.data.efistub)
+    *(.data.rel.ro)
+    *(.data.rel.ro.*)
   }
   .piggydata : {
     *(.piggydata)
+    __piggy_size_addr = . - 4;
   }
 
   . = ALIGN(4);
   _etext = .;
 
   .got.plt		: { *(.got.plt) }
+#ifndef CONFIG_EFI_STUB
   _got_start = .;
   .got			: { *(.got) }
   _got_end = .;
+#endif
 
   /* ensure the zImage file size is always a multiple of 64 bits */
   /* (without a dummy byte, ld just ignores the empty section) */
   .pad			: { BYTE(0); . = ALIGN(8); }
+
+#ifdef CONFIG_EFI_STUB
+  .data : ALIGN(4096) {
+    __pecoff_data_start = .;
+    _got_start = .;
+    *(.got)
+    _got_end = .;
+    /*
+     * The EFI stub always executes from RAM, and runs strictly before the
+     * decompressor, so we can make an exception for its r/w data, and keep it
+     */
+    *(.data.efistub .bss.efistub)
+    __pecoff_data_end = .;
+
+    /*
+     * PE/COFF mandates a file size which is a multiple of 512 bytes if the
+     * section size equals or exceeds 4 KB
+     */
+    . = ALIGN(512);
+  }
+  __pecoff_data_rawsize = . - ADDR(.data);
+#endif
+
   _edata = .;
 
+  /*
+   * The image_end section appears after any additional loadable sections
+   * that the linker may decide to insert in the binary image.  Having
+   * this symbol allows further debug in the near future.
+   */
+  .image_end (NOLOAD) : {
+    /*
+     * EFI requires that the image is aligned to 512 bytes, and appended
+     * DTB requires that we know where the end of the image is.  Ensure
+     * that both are satisfied by ensuring that there are no additional
+     * sections emitted into the decompressor image.
+     */
+    _edata_real = .;
+  }
+
   _magic_sig = ZIMAGE_MAGIC(0x016f2818);
   _magic_start = ZIMAGE_MAGIC(_start);
   _magic_end = ZIMAGE_MAGIC(_edata);
+  _magic_table = ZIMAGE_MAGIC(_table_start - _start);
 
   . = BSS_START;
   __bss_start = .;
-  .bss			: { *(.bss) }
+  .bss			: { *(.bss .bss.*) }
   _end = .;
 
   . = ALIGN(8);		/* the stack must be 64-bit aligned */
   .stack		: { *(.stack) }
 
-  .stab 0		: { *(.stab) }
-  .stabstr 0		: { *(.stabstr) }
-  .stab.excl 0		: { *(.stab.excl) }
-  .stab.exclstr 0	: { *(.stab.exclstr) }
-  .stab.index 0		: { *(.stab.index) }
-  .stab.indexstr 0	: { *(.stab.indexstr) }
-  .comment 0		: { *(.comment) }
+  PROVIDE(__pecoff_data_size = ALIGN(512) - ADDR(.data));
+  PROVIDE(__pecoff_end = ALIGN(512));
+
+  STABS_DEBUG
+  DWARF_DEBUG
+  ARM_DETAILS
+
+  ARM_ASSERTS
 }
+ASSERT(_edata_real == _edata, "error: zImage file size is incorrect");
diff --git a/arch/arm/boot/deflate_xip_data.sh b/arch/arm/boot/deflate_xip_data.sh
new file mode 100755
index 000000000000..304495c3c2c5
--- /dev/null
+++ b/arch/arm/boot/deflate_xip_data.sh
@@ -0,0 +1,62 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-only
+
+# XIP kernel .data segment compressor
+#
+# Created by:	Nicolas Pitre, August 2017
+# Copyright:	(C) 2017  Linaro Limited
+#
+
+# This script locates the start of the .data section in xipImage and
+# substitutes it with a compressed version. The needed offsets are obtained
+# from symbol addresses in vmlinux. It is expected that .data extends to
+# the end of xipImage.
+
+set -e
+
+VMLINUX="$1"
+XIPIMAGE="$2"
+
+DD="dd status=none"
+
+# Use "make V=1" to debug this script.
+case "$KBUILD_VERBOSE" in
+*1*)
+	set -x
+	;;
+esac
+
+sym_val() {
+	# extract hex value for symbol in $1
+	local val=$($NM "$VMLINUX" 2>/dev/null | sed -n "/ $1\$/{s/ .*$//p;q}")
+	[ "$val" ] || { echo "can't find $1 in $VMLINUX" 1>&2; exit 1; }
+	# convert from hex to decimal
+	echo $((0x$val))
+}
+
+__data_loc=$(sym_val __data_loc)
+_edata_loc=$(sym_val _edata_loc)
+base_offset=$(sym_val _xiprom)
+
+# convert to file based offsets
+data_start=$(($__data_loc - $base_offset))
+data_end=$(($_edata_loc - $base_offset))
+
+# Make sure data occupies the last part of the file.
+file_end=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" "$XIPIMAGE")
+if [ "$file_end" != "$data_end" ]; then
+	printf "end of xipImage doesn't match with _edata_loc (%#x vs %#x)\n" \
+	       $(($file_end + $base_offset)) $_edata_loc 1>&2
+	exit 1;
+fi
+
+# be ready to clean up
+trap 'rm -f "$XIPIMAGE.tmp"; exit 1' 1 2 3
+
+# substitute the data section by a compressed version
+$DD if="$XIPIMAGE" count=$data_start iflag=count_bytes of="$XIPIMAGE.tmp"
+$DD if="$XIPIMAGE"  skip=$data_start iflag=skip_bytes |
+$KGZIP -9 >> "$XIPIMAGE.tmp"
+
+# replace kernel binary
+mv -f "$XIPIMAGE.tmp" "$XIPIMAGE"
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4b17f35dc9a7..efe38eb25301 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1,1065 +1,41 @@
-ifeq ($(CONFIG_OF),y)
-
-dtb-$(CONFIG_ARCH_ALPINE) += \
-	alpine-db.dtb
-dtb-$(CONFIG_MACH_ARTPEC6) += \
-	artpec6-devboard.dtb
-dtb-$(CONFIG_MACH_ASM9260) += \
-	alphascale-asm9260-devkit.dtb
-# Keep at91 dtb files sorted alphabetically for each SoC
-dtb-$(CONFIG_SOC_AT91RM9200) += \
-	at91rm9200ek.dtb \
-	mpa1600.dtb
-dtb-$(CONFIG_SOC_AT91SAM9) += \
-	animeo_ip.dtb \
-	at91-qil_a9260.dtb \
-	aks-cdu.dtb \
-	ethernut5.dtb \
-	evk-pro3.dtb \
-	tny_a9260.dtb \
-	usb_a9260.dtb \
-	at91sam9260ek.dtb \
-	at91sam9261ek.dtb \
-	at91sam9263ek.dtb \
-	at91-sam9_l9260.dtb \
-	tny_a9263.dtb \
-	usb_a9263.dtb \
-	at91-foxg20.dtb \
-	at91-kizbox.dtb \
-	at91sam9g20ek.dtb \
-	at91sam9g20ek_2mmc.dtb \
-	tny_a9g20.dtb \
-	usb_a9g20.dtb \
-	usb_a9g20_lpw.dtb \
-	at91sam9m10g45ek.dtb \
-	pm9g45.dtb \
-	at91sam9n12ek.dtb \
-	at91sam9rlek.dtb \
-	at91-ariag25.dtb \
-	at91-ariettag25.dtb \
-	at91-cosino_mega2560.dtb \
-	at91-kizboxmini.dtb \
-	at91sam9g15ek.dtb \
-	at91sam9g25ek.dtb \
-	at91sam9g35ek.dtb \
-	at91sam9x25ek.dtb \
-	at91sam9x35ek.dtb
-dtb-$(CONFIG_SOC_SAM_V7) += \
-	at91-kizbox2.dtb \
-	at91-sama5d2_xplained.dtb \
-	at91-sama5d3_xplained.dtb \
-	at91-tse850-3.dtb \
-	sama5d31ek.dtb \
-	sama5d33ek.dtb \
-	sama5d34ek.dtb \
-	sama5d35ek.dtb \
-	sama5d36ek.dtb \
-	sama5d36ek_cmp.dtb \
-	at91-sama5d4_ma5d4evk.dtb \
-	at91-sama5d4_xplained.dtb \
-	at91-sama5d4ek.dtb \
-	at91-vinco.dtb
-dtb-$(CONFIG_ARCH_ATLAS6) += \
-	atlas6-evb.dtb
-dtb-$(CONFIG_ARCH_ATLAS7) += \
-	atlas7-evb.dtb
-dtb-$(CONFIG_ARCH_AXXIA) += \
-	axm5516-amarillo.dtb
-dtb-$(CONFIG_ARCH_BCM2835) += \
-	bcm2835-rpi-b.dtb \
-	bcm2835-rpi-a.dtb \
-	bcm2835-rpi-b-rev2.dtb \
-	bcm2835-rpi-b-plus.dtb \
-	bcm2835-rpi-a-plus.dtb \
-	bcm2836-rpi-2-b.dtb \
-	bcm2837-rpi-3-b.dtb \
-	bcm2835-rpi-zero.dtb
-dtb-$(CONFIG_ARCH_BCM_5301X) += \
-	bcm4708-asus-rt-ac56u.dtb \
-	bcm4708-asus-rt-ac68u.dtb \
-	bcm4708-buffalo-wzr-1750dhp.dtb \
-	bcm4708-linksys-ea6300-v1.dtb \
-	bcm4708-luxul-xap-1510.dtb \
-	bcm4708-luxul-xwc-1000.dtb \
-	bcm4708-netgear-r6250.dtb \
-	bcm4708-netgear-r6300-v2.dtb \
-	bcm4708-smartrg-sr400ac.dtb \
-	bcm47081-asus-rt-n18u.dtb \
-	bcm47081-buffalo-wzr-600dhp2.dtb \
-	bcm47081-buffalo-wzr-900dhp.dtb \
-	bcm47081-luxul-xap-1410.dtb \
-	bcm47081-luxul-xwr-1200.dtb \
-	bcm47081-tplink-archer-c5-v2.dtb \
-	bcm4709-asus-rt-ac87u.dtb \
-	bcm4709-buffalo-wxr-1900dhp.dtb \
-	bcm4709-linksys-ea9200.dtb \
-	bcm4709-netgear-r7000.dtb \
-	bcm4709-netgear-r8000.dtb \
-	bcm4709-tplink-archer-c9-v1.dtb \
-	bcm47094-dlink-dir-885l.dtb \
-	bcm47094-linksys-panamera.dtb \
-	bcm47094-luxul-xwr-3100.dtb \
-	bcm47094-netgear-r8500.dtb \
-	bcm94708.dtb \
-	bcm94709.dtb \
-	bcm953012er.dtb \
-	bcm953012hr.dtb \
-	bcm953012k.dtb
-dtb-$(CONFIG_ARCH_BCM_53573) += \
-	bcm47189-tenda-ac9.dtb
-dtb-$(CONFIG_ARCH_BCM_63XX) += \
-	bcm963138dvt.dtb
-dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
-	bcm911360_entphn.dtb \
-	bcm911360k.dtb \
-	bcm958300k.dtb \
-	bcm958305k.dtb
-dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
-	bcm28155-ap.dtb \
-	bcm21664-garnet.dtb \
-	bcm23550-sparrow.dtb
-dtb-$(CONFIG_ARCH_BCM_NSP) += \
-	bcm958522er.dtb \
-	bcm958525er.dtb \
-	bcm958525xmc.dtb \
-	bcm958622hr.dtb \
-	bcm958623hr.dtb \
-	bcm958625hr.dtb \
-	bcm988312hr.dtb \
-	bcm958625k.dtb
-dtb-$(CONFIG_ARCH_BERLIN) += \
-	berlin2-sony-nsz-gs7.dtb \
-	berlin2cd-google-chromecast.dtb \
-	berlin2q-marvell-dmp.dtb
-dtb-$(CONFIG_ARCH_BRCMSTB) += \
-	bcm7445-bcm97445svmb.dtb
-dtb-$(CONFIG_ARCH_CLPS711X) += \
-	ep7211-edb7211.dtb
-dtb-$(CONFIG_ARCH_DAVINCI) += \
-	da850-lcdk.dtb \
-	da850-enbw-cmc.dtb \
-	da850-evm.dtb \
-	da850-lego-ev3.dtb
-dtb-$(CONFIG_ARCH_DIGICOLOR) += \
-	cx92755_equinox.dtb
-dtb-$(CONFIG_ARCH_EFM32) += \
-	efm32gg-dk3750.dtb
-dtb-$(CONFIG_ARCH_EXYNOS3) += \
-	exynos3250-artik5-eval.dtb \
-	exynos3250-monk.dtb \
-	exynos3250-rinato.dtb
-dtb-$(CONFIG_ARCH_EXYNOS4) += \
-	exynos4210-origen.dtb \
-	exynos4210-smdkv310.dtb \
-	exynos4210-trats.dtb \
-	exynos4210-universal_c210.dtb \
-	exynos4412-itop-elite.dtb \
-	exynos4412-odroidu3.dtb \
-	exynos4412-odroidx.dtb \
-	exynos4412-odroidx2.dtb \
-	exynos4412-origen.dtb \
-	exynos4412-smdk4412.dtb \
-	exynos4412-tiny4412.dtb \
-	exynos4412-trats2.dtb
-dtb-$(CONFIG_ARCH_EXYNOS5) += \
-	exynos5250-arndale.dtb \
-	exynos5250-smdk5250.dtb \
-	exynos5250-snow.dtb \
-	exynos5250-snow-rev5.dtb \
-	exynos5250-spring.dtb \
-	exynos5260-xyref5260.dtb \
-	exynos5410-odroidxu.dtb \
-	exynos5410-smdk5410.dtb \
-	exynos5420-arndale-octa.dtb \
-	exynos5420-peach-pit.dtb \
-	exynos5420-smdk5420.dtb \
-	exynos5422-odroidxu3.dtb \
-	exynos5422-odroidxu3-lite.dtb \
-	exynos5422-odroidxu4.dtb \
-	exynos5440-sd5v1.dtb \
-	exynos5440-ssdk5440.dtb \
-	exynos5800-peach-pi.dtb
-dtb-$(CONFIG_ARCH_GEMINI) += \
-	gemini-nas4220b.dtb \
-	gemini-rut1xx.dtb \
-	gemini-sq201.dtb \
-	gemini-wbd111.dtb \
-	gemini-wbd222.dtb
-dtb-$(CONFIG_ARCH_HI3xxx) += \
-	hi3620-hi4511.dtb
-dtb-$(CONFIG_ARCH_HIGHBANK) += \
-	highbank.dtb \
-	ecx-2000.dtb
-dtb-$(CONFIG_ARCH_HIP01) += \
-	hip01-ca9x2.dtb
-dtb-$(CONFIG_ARCH_HIP04) += \
-	hip04-d01.dtb
-dtb-$(CONFIG_ARCH_HISI) += \
-	hi3519-demb.dtb
-dtb-$(CONFIG_ARCH_HIX5HD2) += \
-	hisi-x5hd2-dkb.dtb
-dtb-$(CONFIG_ARCH_INTEGRATOR) += \
-	integratorap.dtb \
-	integratorcp.dtb
-dtb-$(CONFIG_ARCH_KEYSTONE) += \
-	keystone-k2hk-evm.dtb \
-	keystone-k2l-evm.dtb \
-	keystone-k2e-evm.dtb \
-	keystone-k2g-evm.dtb \
-	keystone-k2g-ice.dtb
-dtb-$(CONFIG_MACH_KIRKWOOD) += \
-	kirkwood-b3.dtb \
-	kirkwood-blackarmor-nas220.dtb \
-	kirkwood-cloudbox.dtb \
-	kirkwood-d2net.dtb \
-	kirkwood-db-88f6281.dtb \
-	kirkwood-db-88f6282.dtb \
-	kirkwood-dir665.dtb \
-	kirkwood-dns320.dtb \
-	kirkwood-dns325.dtb \
-	kirkwood-dockstar.dtb \
-	kirkwood-dreamplug.dtb \
-	kirkwood-ds109.dtb \
-	kirkwood-ds110jv10.dtb \
-	kirkwood-ds111.dtb \
-	kirkwood-ds112.dtb \
-	kirkwood-ds209.dtb \
-	kirkwood-ds210.dtb \
-	kirkwood-ds212.dtb \
-	kirkwood-ds212j.dtb \
-	kirkwood-ds409.dtb \
-	kirkwood-ds409slim.dtb \
-	kirkwood-ds411.dtb \
-	kirkwood-ds411j.dtb \
-	kirkwood-ds411slim.dtb \
-	kirkwood-goflexnet.dtb \
-	kirkwood-guruplug-server-plus.dtb \
-	kirkwood-ib62x0.dtb \
-	kirkwood-iconnect.dtb \
-	kirkwood-iomega_ix2_200.dtb \
-	kirkwood-is2.dtb \
-	kirkwood-km_kirkwood.dtb \
-	kirkwood-laplug.dtb \
-	kirkwood-linkstation-lsqvl.dtb \
-	kirkwood-linkstation-lsvl.dtb \
-	kirkwood-linkstation-lswsxl.dtb \
-	kirkwood-linkstation-lswvl.dtb \
-	kirkwood-linkstation-lswxl.dtb \
-	kirkwood-linksys-viper.dtb \
-	kirkwood-lschlv2.dtb \
-	kirkwood-lsxhl.dtb \
-	kirkwood-mplcec4.dtb \
-	kirkwood-mv88f6281gtw-ge.dtb \
-	kirkwood-nas2big.dtb \
-	kirkwood-net2big.dtb \
-	kirkwood-net5big.dtb \
-	kirkwood-netgear_readynas_duo_v2.dtb \
-	kirkwood-netgear_readynas_nv+_v2.dtb \
-	kirkwood-ns2.dtb \
-	kirkwood-ns2lite.dtb \
-	kirkwood-ns2max.dtb \
-	kirkwood-ns2mini.dtb \
-	kirkwood-nsa310.dtb \
-	kirkwood-nsa310a.dtb \
-	kirkwood-nsa320.dtb \
-	kirkwood-nsa325.dtb \
-	kirkwood-openblocks_a6.dtb \
-	kirkwood-openblocks_a7.dtb \
-	kirkwood-openrd-base.dtb \
-	kirkwood-openrd-client.dtb \
-	kirkwood-openrd-ultimate.dtb \
-	kirkwood-pogo_e02.dtb \
-	kirkwood-pogoplug-series-4.dtb \
-	kirkwood-rd88f6192.dtb \
-	kirkwood-rd88f6281-z0.dtb \
-	kirkwood-rd88f6281-a.dtb \
-	kirkwood-rs212.dtb \
-	kirkwood-rs409.dtb \
-	kirkwood-rs411.dtb \
-	kirkwood-sheevaplug.dtb \
-	kirkwood-sheevaplug-esata.dtb \
-	kirkwood-t5325.dtb \
-	kirkwood-topkick.dtb \
-	kirkwood-ts219-6281.dtb \
-	kirkwood-ts219-6282.dtb \
-	kirkwood-ts419-6281.dtb \
-	kirkwood-ts419-6282.dtb
-dtb-$(CONFIG_ARCH_LPC18XX) += \
-	lpc4337-ciaa.dtb \
-	lpc4350-hitex-eval.dtb \
-	lpc4357-ea4357-devkit.dtb
-dtb-$(CONFIG_ARCH_LPC32XX) += \
-	lpc3250-ea3250.dtb \
-	lpc3250-phy3250.dtb
-dtb-$(CONFIG_MACH_MESON6) += \
-	meson6-atv1200.dtb
-dtb-$(CONFIG_MACH_MESON8) += \
-	meson8-minix-neo-x8.dtb
-dtb-$(CONFIG_ARCH_MMP) += \
-	pxa168-aspenite.dtb \
-	pxa910-dkb.dtb \
-	mmp2-brownstone.dtb
-dtb-$(CONFIG_MACH_MESON8B) += \
-	meson8b-mxq.dtb \
-	meson8b-odroidc1.dtb
-dtb-$(CONFIG_ARCH_MPS2) += \
-	mps2-an385.dtb \
-	mps2-an399.dtb
-dtb-$(CONFIG_ARCH_MOXART) += \
-	moxart-uc7112lx.dtb
-dtb-$(CONFIG_SOC_IMX1) += \
-	imx1-ads.dtb \
-	imx1-apf9328.dtb
-dtb-$(CONFIG_SOC_IMX25) += \
-	imx25-eukrea-mbimxsd25-baseboard.dtb \
-	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \
-	imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \
-	imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \
-	imx25-karo-tx25.dtb \
-	imx25-pdk.dtb
-dtb-$(CONFIG_SOC_IMX27) += \
-	imx27-apf27.dtb \
-	imx27-apf27dev.dtb \
-	imx27-eukrea-mbimxsd27-baseboard.dtb \
-	imx27-pdk.dtb \
-	imx27-phytec-phycore-rdk.dtb \
-	imx27-phytec-phycard-s-rdk.dtb
-dtb-$(CONFIG_SOC_IMX31) += \
-	imx31-bug.dtb
-dtb-$(CONFIG_SOC_IMX35) += \
-	imx35-eukrea-mbimxsd35-baseboard.dtb \
-	imx35-pdk.dtb
-dtb-$(CONFIG_SOC_IMX50) += \
-	imx50-evk.dtb
-dtb-$(CONFIG_SOC_IMX51) += \
-	imx51-apf51.dtb \
-	imx51-apf51dev.dtb \
-	imx51-babbage.dtb \
-	imx51-digi-connectcore-jsk.dtb \
-	imx51-eukrea-mbimxsd51-baseboard.dtb \
-	imx51-ts4800.dtb
-dtb-$(CONFIG_SOC_IMX53) += \
-	imx53-ard.dtb \
-	imx53-m53evk.dtb \
-	imx53-mba53.dtb \
-	imx53-qsb.dtb \
-	imx53-qsrb.dtb \
-	imx53-smd.dtb \
-	imx53-tx53-x03x.dtb \
-	imx53-tx53-x13x.dtb \
-	imx53-usbarmory.dtb \
-	imx53-voipac-bsb.dtb
-dtb-$(CONFIG_SOC_IMX6Q) += \
-	imx6dl-apf6dev.dtb \
-	imx6dl-aristainetos_4.dtb \
-	imx6dl-aristainetos_7.dtb \
-	imx6dl-aristainetos2_4.dtb \
-	imx6dl-aristainetos2_7.dtb \
-	imx6dl-colibri-eval-v3.dtb \
-	imx6dl-cubox-i.dtb \
-	imx6dl-dfi-fs700-m60.dtb \
-	imx6dl-gw51xx.dtb \
-	imx6dl-gw52xx.dtb \
-	imx6dl-gw53xx.dtb \
-	imx6dl-gw54xx.dtb \
-	imx6dl-gw551x.dtb \
-	imx6dl-gw552x.dtb \
-	imx6dl-gw553x.dtb \
-	imx6dl-gw560x.dtb \
-	imx6dl-gw5903.dtb \
-	imx6dl-gw5904.dtb \
-	imx6dl-hummingboard.dtb \
-	imx6dl-icore.dtb \
-	imx6dl-icore-rqs.dtb \
-	imx6dl-nit6xlite.dtb \
-	imx6dl-nitrogen6x.dtb \
-	imx6dl-phytec-pbab01.dtb \
-	imx6dl-rex-basic.dtb \
-	imx6dl-riotboard.dtb \
-	imx6dl-sabreauto.dtb \
-	imx6dl-sabrelite.dtb \
-	imx6dl-sabresd.dtb \
-	imx6dl-savageboard.dtb \
-	imx6dl-ts4900.dtb \
-	imx6dl-tx6dl-comtft.dtb \
-	imx6dl-tx6s-8034.dtb \
-	imx6dl-tx6s-8035.dtb \
-	imx6dl-tx6u-801x.dtb \
-	imx6dl-tx6u-8033.dtb \
-	imx6dl-tx6u-811x.dtb \
-	imx6dl-tx6u-81xx-mb7.dtb \
-	imx6dl-udoo.dtb \
-	imx6dl-wandboard.dtb \
-	imx6dl-wandboard-revb1.dtb \
-	imx6q-apalis-ixora.dtb \
-	imx6q-apf6dev.dtb \
-	imx6q-arm2.dtb \
-	imx6q-b450v3.dtb \
-	imx6q-b650v3.dtb \
-	imx6q-b850v3.dtb \
-	imx6q-cm-fx6.dtb \
-	imx6q-cubox-i.dtb \
-	imx6q-dfi-fs700-m60.dtb \
-	imx6q-dmo-edmqmx6.dtb \
-	imx6q-evi.dtb \
-	imx6q-gk802.dtb \
-	imx6q-gw51xx.dtb \
-	imx6q-gw52xx.dtb \
-	imx6q-gw53xx.dtb \
-	imx6q-gw5400-a.dtb \
-	imx6q-gw54xx.dtb \
-	imx6q-gw551x.dtb \
-	imx6q-gw552x.dtb \
-	imx6q-gw553x.dtb \
-	imx6q-gw560x.dtb \
-	imx6q-gw5903.dtb \
-	imx6q-gw5904.dtb \
-	imx6q-h100.dtb \
-	imx6q-hummingboard.dtb \
-	imx6q-icore.dtb \
-	imx6q-icore-ofcap10.dtb \
-	imx6q-icore-ofcap12.dtb \
-	imx6q-icore-rqs.dtb \
-	imx6q-marsboard.dtb \
-	imx6q-mccmon6.dtb \
-	imx6q-nitrogen6x.dtb \
-	imx6q-nitrogen6_max.dtb \
-	imx6q-nitrogen6_som2.dtb \
-	imx6q-novena.dtb \
-	imx6q-phytec-pbab01.dtb \
-	imx6q-rex-pro.dtb \
-	imx6q-sabreauto.dtb \
-	imx6q-sabrelite.dtb \
-	imx6q-sabresd.dtb \
-	imx6q-savageboard.dtb \
-	imx6q-sbc6x.dtb \
-	imx6q-tbs2910.dtb \
-	imx6q-ts4900.dtb \
-	imx6q-tx6q-1010.dtb \
-	imx6q-tx6q-1010-comtft.dtb \
-	imx6q-tx6q-1020.dtb \
-	imx6q-tx6q-1020-comtft.dtb \
-	imx6q-tx6q-1036.dtb \
-	imx6q-tx6q-1110.dtb \
-	imx6q-tx6q-11x0-mb7.dtb \
-	imx6q-udoo.dtb \
-	imx6q-utilite-pro.dtb \
-	imx6q-wandboard.dtb \
-	imx6q-wandboard-revb1.dtb \
-	imx6q-zii-rdu2.dtb \
-	imx6qp-nitrogen6_max.dtb \
-	imx6qp-nitrogen6_som2.dtb \
-	imx6qp-sabreauto.dtb \
-	imx6qp-sabresd.dtb \
-	imx6qp-zii-rdu2.dtb
-dtb-$(CONFIG_SOC_IMX6SL) += \
-	imx6sl-evk.dtb \
-	imx6sl-warp.dtb
-dtb-$(CONFIG_SOC_IMX6SX) += \
-	imx6sx-nitrogen6sx.dtb \
-	imx6sx-sabreauto.dtb \
-	imx6sx-sdb-reva.dtb \
-	imx6sx-sdb-sai.dtb \
-	imx6sx-sdb.dtb \
-	imx6sx-udoo-neo-basic.dtb \
-	imx6sx-udoo-neo-extended.dtb \
-	imx6sx-udoo-neo-full.dtb
-dtb-$(CONFIG_SOC_IMX6UL) += \
-	imx6ul-14x14-evk.dtb \
-	imx6ul-geam-kit.dtb \
-	imx6ul-isiot-emmc.dtb \
-	imx6ul-isiot-nand.dtb \
-	imx6ul-liteboard.dtb \
-	imx6ul-opos6uldev.dtb \
-	imx6ul-pico-hobbit.dtb \
-	imx6ul-tx6ul-0010.dtb \
-	imx6ul-tx6ul-0011.dtb \
-	imx6ul-tx6ul-mainboard.dtb \
-	imx6ull-14x14-evk.dtb
-dtb-$(CONFIG_SOC_IMX7D) += \
-	imx7d-cl-som-imx7.dtb \
-	imx7d-colibri-eval-v3.dtb \
-	imx7d-nitrogen7.dtb \
-	imx7d-pico.dtb \
-	imx7d-sbc-imx7.dtb \
-	imx7d-sdb.dtb \
-	imx7d-sdb-sht11.dtb \
-	imx7s-colibri-eval-v3.dtb \
-	imx7s-warp.dtb
-dtb-$(CONFIG_SOC_LS1021A) += \
-	ls1021a-qds.dtb \
-	ls1021a-twr.dtb
-dtb-$(CONFIG_SOC_VF610) += \
-	vf500-colibri-eval-v3.dtb \
-	vf610-colibri-eval-v3.dtb \
-	vf610m4-colibri.dtb \
-	vf610-cosmic.dtb \
-	vf610m4-cosmic.dtb \
-	vf610-twr.dtb \
-	vf610-zii-dev-rev-b.dtb \
-	vf610-zii-dev-rev-c.dtb
-dtb-$(CONFIG_ARCH_MXS) += \
-	imx23-evk.dtb \
-	imx23-olinuxino.dtb \
-	imx23-sansa.dtb \
-	imx23-stmp378x_devb.dtb \
-	imx23-xfi3.dtb \
-	imx28-apf28.dtb \
-	imx28-apf28dev.dtb \
-	imx28-apx4devkit.dtb \
-	imx28-cfa10036.dtb \
-	imx28-cfa10037.dtb \
-	imx28-cfa10049.dtb \
-	imx28-cfa10055.dtb \
-	imx28-cfa10056.dtb \
-	imx28-cfa10057.dtb \
-	imx28-cfa10058.dtb \
-	imx28-duckbill-2-485.dtb \
-	imx28-duckbill-2.dtb \
-	imx28-duckbill-2-enocean.dtb \
-	imx28-duckbill-2-spi.dtb \
-	imx28-duckbill.dtb \
-	imx28-eukrea-mbmx283lc.dtb \
-	imx28-eukrea-mbmx287lc.dtb \
-	imx28-evk.dtb \
-	imx28-m28cu3.dtb \
-	imx28-m28evk.dtb \
-	imx28-sps1.dtb \
-	imx28-tx28.dtb
-dtb-$(CONFIG_ARCH_NOMADIK) += \
-	ste-nomadik-s8815.dtb \
-	ste-nomadik-nhk15.dtb
-dtb-$(CONFIG_ARCH_NSPIRE) += \
-	nspire-cx.dtb \
-	nspire-tp.dtb \
-	nspire-clp.dtb
-dtb-$(CONFIG_ARCH_OMAP2) += \
-	omap2420-h4.dtb \
-	omap2420-n800.dtb \
-	omap2420-n810.dtb \
-	omap2420-n810-wimax.dtb \
-	omap2430-sdp.dtb
-dtb-$(CONFIG_ARCH_OMAP3) += \
-	am3517-craneboard.dtb \
-	am3517-evm.dtb \
-	am3517_mt_ventoux.dtb \
-	logicpd-torpedo-37xx-devkit.dtb \
-	logicpd-som-lv-37xx-devkit.dtb \
-	omap3430-sdp.dtb \
-	omap3-beagle.dtb \
-	omap3-beagle-xm.dtb \
-	omap3-beagle-xm-ab.dtb \
-	omap3-cm-t3517.dtb \
-	omap3-cm-t3530.dtb \
-	omap3-cm-t3730.dtb \
-	omap3-devkit8000.dtb \
-	omap3-devkit8000-lcd43.dtb \
-	omap3-devkit8000-lcd70.dtb \
-	omap3-evm.dtb \
-	omap3-evm-37xx.dtb \
-	omap3-gta04a3.dtb \
-	omap3-gta04a4.dtb \
-	omap3-gta04a5.dtb \
-	omap3-ha.dtb \
-	omap3-ha-lcd.dtb \
-	omap3-igep0020.dtb \
-	omap3-igep0020-rev-f.dtb \
-	omap3-igep0030.dtb \
-	omap3-igep0030-rev-g.dtb \
-	omap3-ldp.dtb \
-	omap3-lilly-dbb056.dtb \
-	omap3-n900.dtb \
-	omap3-n9.dtb \
-	omap3-n950.dtb \
-	omap3-overo-alto35.dtb \
-	omap3-overo-chestnut43.dtb \
-	omap3-overo-gallop43.dtb \
-	omap3-overo-palo35.dtb \
-	omap3-overo-palo43.dtb \
-	omap3-overo-storm-alto35.dtb \
-	omap3-overo-storm-chestnut43.dtb \
-	omap3-overo-storm-gallop43.dtb \
-	omap3-overo-storm-palo35.dtb \
-	omap3-overo-storm-palo43.dtb \
-	omap3-overo-storm-summit.dtb \
-	omap3-overo-storm-tobi.dtb \
-	omap3-overo-storm-tobiduo.dtb \
-	omap3-overo-summit.dtb \
-	omap3-overo-tobi.dtb \
-	omap3-overo-tobiduo.dtb \
-	omap3-pandora-600mhz.dtb \
-	omap3-pandora-1ghz.dtb \
-	omap3-sbc-t3517.dtb \
-	omap3-sbc-t3530.dtb \
-	omap3-sbc-t3730.dtb \
-	omap3-sniper.dtb \
-	omap3-thunder.dtb \
-	omap3-zoom3.dtb
-dtb-$(CONFIG_SOC_TI81XX) += \
-	dm8148-evm.dtb \
-	dm8148-t410.dtb \
-	dm8168-evm.dtb \
-	dra62x-j5eco-evm.dtb
-dtb-$(CONFIG_SOC_AM33XX) += \
-	am335x-baltos-ir2110.dtb \
-	am335x-baltos-ir3220.dtb \
-	am335x-baltos-ir5221.dtb \
-	am335x-base0033.dtb \
-	am335x-bone.dtb \
-	am335x-boneblack.dtb \
-	am335x-boneblack-wireless.dtb \
-	am335x-boneblue.dtb \
-	am335x-bonegreen.dtb \
-	am335x-bonegreen-wireless.dtb \
-	am335x-chiliboard.dtb \
-	am335x-cm-t335.dtb \
-	am335x-evm.dtb \
-	am335x-evmsk.dtb \
-	am335x-icev2.dtb \
-	am335x-lxm.dtb \
-	am335x-nano.dtb \
-	am335x-pepper.dtb \
-	am335x-phycore-rdk.dtb \
-	am335x-shc.dtb \
-	am335x-sbc-t335.dtb \
-	am335x-sl50.dtb \
-	am335x-wega-rdk.dtb
-dtb-$(CONFIG_ARCH_OMAP4) += \
-	omap4-droid4-xt894.dtb \
-	omap4-duovero-parlor.dtb \
-	omap4-kc1.dtb \
-	omap4-panda.dtb \
-	omap4-panda-a4.dtb \
-	omap4-panda-es.dtb \
-	omap4-sdp.dtb \
-	omap4-sdp-es23plus.dtb \
-	omap4-var-dvk-om44.dtb \
-	omap4-var-stk-om44.dtb
-dtb-$(CONFIG_SOC_AM43XX) += \
-	am43x-epos-evm.dtb \
-	am437x-cm-t43.dtb \
-	am437x-gp-evm.dtb \
-	am437x-idk-evm.dtb \
-	am437x-sbc-t43.dtb \
-	am437x-sk-evm.dtb
-dtb-$(CONFIG_SOC_OMAP5) += \
-	omap5-cm-t54.dtb \
-	omap5-igep0050.dtb \
-	omap5-sbc-t54.dtb \
-	omap5-uevm.dtb
-dtb-$(CONFIG_SOC_DRA7XX) += \
-	am57xx-beagle-x15.dtb \
-	am57xx-beagle-x15-revb1.dtb \
-	am57xx-cl-som-am57x.dtb \
-	am57xx-sbc-am57x.dtb \
-	am572x-idk.dtb \
-	am571x-idk.dtb \
-	dra7-evm.dtb \
-	dra72-evm.dtb \
-	dra72-evm-revc.dtb \
-	dra71-evm.dtb
-dtb-$(CONFIG_ARCH_ORION5X) += \
-	orion5x-kuroboxpro.dtb \
-	orion5x-lacie-d2-network.dtb \
-	orion5x-lacie-ethernet-disk-mini-v2.dtb \
-	orion5x-linkstation-lsgl.dtb \
-	orion5x-linkstation-lswtgl.dtb \
-	orion5x-linkstation-lschl.dtb \
-	orion5x-lswsgl.dtb \
-	orion5x-maxtor-shared-storage-2.dtb \
-	orion5x-netgear-wnr854t.dtb \
-	orion5x-rd88f5182-nas.dtb
-dtb-$(CONFIG_ARCH_ACTIONS) += \
-	owl-s500-guitar-bb-rev-b.dtb
-dtb-$(CONFIG_ARCH_PRIMA2) += \
-	prima2-evb.dtb
-dtb-$(CONFIG_ARCH_OXNAS) += \
-	wd-mbwe.dtb \
-	cloudengines-pogoplug-series-3.dtb
-dtb-$(CONFIG_ARCH_QCOM) += \
-	qcom-apq8060-dragonboard.dtb \
-	qcom-apq8064-arrow-sd-600eval.dtb \
-	qcom-apq8064-cm-qs600.dtb \
-	qcom-apq8064-ifc6410.dtb \
-	qcom-apq8064-sony-xperia-yuga.dtb \
-	qcom-apq8064-asus-nexus7-flo.dtb \
-	qcom-apq8074-dragonboard.dtb \
-	qcom-apq8084-ifc6540.dtb \
-	qcom-apq8084-mtp.dtb \
-	qcom-ipq4019-ap.dk01.1-c1.dtb \
-	qcom-ipq8064-ap148.dtb \
-	qcom-msm8660-surf.dtb \
-	qcom-msm8960-cdp.dtb \
-	qcom-msm8974-lge-nexus5-hammerhead.dtb \
-	qcom-msm8974-sony-xperia-honami.dtb \
-	qcom-mdm9615-wp8548-mangoh-green.dtb
-dtb-$(CONFIG_ARCH_REALVIEW) += \
-	arm-realview-pb1176.dtb \
-	arm-realview-pb11mp.dtb \
-	arm-realview-eb.dtb \
-	arm-realview-eb-bbrevd.dtb \
-	arm-realview-eb-11mp.dtb \
-	arm-realview-eb-11mp-bbrevd.dtb \
-	arm-realview-eb-11mp-ctrevb.dtb \
-	arm-realview-eb-11mp-bbrevd-ctrevb.dtb \
-	arm-realview-eb-a9mp.dtb \
-	arm-realview-eb-a9mp-bbrevd.dtb \
-	arm-realview-pba8.dtb \
-	arm-realview-pbx-a9.dtb
-dtb-$(CONFIG_ARCH_RENESAS) += \
-	emev2-kzm9d.dtb \
-	r7s72100-genmai.dtb \
-	r7s72100-gr-peach.dtb \
-	r7s72100-rskrza1.dtb \
-	r8a73a4-ape6evm.dtb \
-	r8a7740-armadillo800eva.dtb \
-	r8a7743-iwg20d-q7.dtb \
-	r8a7743-sk-rzg1m.dtb \
-	r8a7745-sk-rzg1e.dtb \
-	r8a7778-bockw.dtb \
-	r8a7779-marzen.dtb \
-	r8a7790-lager.dtb \
-	r8a7791-koelsch.dtb \
-	r8a7791-porter.dtb \
-	r8a7792-blanche.dtb \
-	r8a7792-wheat.dtb \
-	r8a7793-gose.dtb \
-	r8a7794-alt.dtb \
-	r8a7794-silk.dtb \
-	sh73a0-kzm9g.dtb
-dtb-$(CONFIG_ARCH_ROCKCHIP) += \
-	rv1108-evb.dtb \
-	rk3036-evb.dtb \
-	rk3036-kylin.dtb \
-	rk3066a-bqcurie2.dtb \
-	rk3066a-marsboard.dtb \
-	rk3066a-mk808.dtb \
-	rk3066a-rayeager.dtb \
-	rk3188-px3-evb.dtb \
-	rk3188-radxarock.dtb \
-	rk3228-evb.dtb \
-	rk3229-evb.dtb \
-	rk3288-evb-act8846.dtb \
-	rk3288-evb-rk808.dtb \
-	rk3288-fennec.dtb \
-	rk3288-firefly-beta.dtb \
-	rk3288-firefly.dtb \
-	rk3288-firefly-reload.dtb \
-	rk3288-miqi.dtb \
-	rk3288-phycore-rdk.dtb \
-	rk3288-popmetal.dtb \
-	rk3288-r89.dtb \
-	rk3288-rock2-square.dtb \
-	rk3288-tinker.dtb \
-	rk3288-veyron-brain.dtb \
-	rk3288-veyron-jaq.dtb \
-	rk3288-veyron-jerry.dtb \
-	rk3288-veyron-mickey.dtb \
-	rk3288-veyron-minnie.dtb \
-	rk3288-veyron-pinky.dtb \
-	rk3288-veyron-speedy.dtb
-dtb-$(CONFIG_ARCH_S3C24XX) += \
-	s3c2416-smdk2416.dtb
-dtb-$(CONFIG_ARCH_S3C64XX) += \
-	s3c6410-mini6410.dtb \
-	s3c6410-smdk6410.dtb
-dtb-$(CONFIG_ARCH_S5PV210) += \
-	s5pv210-aquila.dtb \
-	s5pv210-goni.dtb \
-	s5pv210-smdkc110.dtb \
-	s5pv210-smdkv210.dtb \
-	s5pv210-torbreck.dtb
-dtb-$(CONFIG_ARCH_SOCFPGA) += \
-	socfpga_arria5_socdk.dtb \
-	socfpga_arria10_socdk_nand.dtb \
-	socfpga_arria10_socdk_qspi.dtb \
-	socfpga_arria10_socdk_sdmmc.dtb \
-	socfpga_cyclone5_mcvevk.dtb \
-	socfpga_cyclone5_socdk.dtb \
-	socfpga_cyclone5_de0_sockit.dtb \
-	socfpga_cyclone5_sockit.dtb \
-	socfpga_cyclone5_socrates.dtb \
-	socfpga_cyclone5_sodia.dtb \
-	socfpga_cyclone5_vining_fpga.dtb \
-	socfpga_vt.dtb
-dtb-$(CONFIG_ARCH_SPEAR13XX) += \
-	spear1310-evb.dtb \
-	spear1340-evb.dtb
-dtb-$(CONFIG_ARCH_SPEAR3XX) += \
-	spear300-evb.dtb \
-	spear310-evb.dtb \
-	spear320-evb.dtb \
-	spear320-hmi.dtb
-dtb-$(CONFIG_ARCH_SPEAR6XX) += \
-	spear600-evb.dtb
-dtb-$(CONFIG_ARCH_STI) += \
-	stih407-b2120.dtb \
-	stih410-b2120.dtb \
-	stih410-b2260.dtb \
-	stih418-b2199.dtb
-dtb-$(CONFIG_ARCH_STM32)+= \
-	stm32f429-disco.dtb \
-	stm32f469-disco.dtb \
-	stm32f746-disco.dtb \
-	stm32f769-disco.dtb \
-	stm32429i-eval.dtb \
-	stm32746g-eval.dtb \
-	stm32h743i-eval.dtb \
-	stm32h743i-disco.dtb
-dtb-$(CONFIG_MACH_SUN4I) += \
-	sun4i-a10-a1000.dtb \
-	sun4i-a10-ba10-tvbox.dtb \
-	sun4i-a10-chuwi-v7-cw0825.dtb \
-	sun4i-a10-cubieboard.dtb \
-	sun4i-a10-dserve-dsrv9703c.dtb \
-	sun4i-a10-gemei-g9.dtb \
-	sun4i-a10-hackberry.dtb \
-	sun4i-a10-hyundai-a7hd.dtb \
-	sun4i-a10-inet1.dtb \
-	sun4i-a10-inet97fv2.dtb \
-	sun4i-a10-inet9f-rev03.dtb \
-	sun4i-a10-itead-iteaduino-plus.dtb \
-	sun4i-a10-jesurun-q5.dtb \
-	sun4i-a10-marsboard.dtb \
-	sun4i-a10-mini-xplus.dtb \
-	sun4i-a10-mk802.dtb \
-	sun4i-a10-mk802ii.dtb \
-	sun4i-a10-olinuxino-lime.dtb \
-	sun4i-a10-pcduino.dtb \
-	sun4i-a10-pcduino2.dtb \
-	sun4i-a10-pov-protab2-ips9.dtb
-dtb-$(CONFIG_MACH_SUN5I) += \
-	sun5i-a10s-auxtek-t003.dtb \
-	sun5i-a10s-auxtek-t004.dtb \
-	sun5i-a10s-mk802.dtb \
-	sun5i-a10s-olinuxino-micro.dtb \
-	sun5i-a10s-r7-tv-dongle.dtb \
-	sun5i-a10s-wobo-i5.dtb \
-	sun5i-a13-difrnce-dit4350.dtb \
-	sun5i-a13-empire-electronix-d709.dtb \
-	sun5i-a13-empire-electronix-m712.dtb \
-	sun5i-a13-hsg-h702.dtb \
-	sun5i-a13-inet-98v-rev2.dtb \
-	sun5i-a13-licheepi-one.dtb \
-	sun5i-a13-olinuxino.dtb \
-	sun5i-a13-olinuxino-micro.dtb \
-	sun5i-a13-q8-tablet.dtb \
-	sun5i-a13-utoo-p66.dtb \
-	sun5i-gr8-chip-pro.dtb \
-	sun5i-gr8-evb.dtb \
-	sun5i-r8-chip.dtb
-dtb-$(CONFIG_MACH_SUN6I) += \
-	sun6i-a31-app4-evb1.dtb \
-	sun6i-a31-colombus.dtb \
-	sun6i-a31-hummingbird.dtb \
-	sun6i-a31-i7.dtb \
-	sun6i-a31-m9.dtb \
-	sun6i-a31-mele-a1000g-quad.dtb \
-	sun6i-a31s-colorfly-e708-q1.dtb \
-	sun6i-a31s-cs908.dtb \
-	sun6i-a31s-inet-q972.dtb \
-	sun6i-a31s-primo81.dtb \
-	sun6i-a31s-sina31s.dtb \
-	sun6i-a31s-sinovoip-bpi-m2.dtb \
-	sun6i-a31s-yones-toptech-bs1078-v2.dtb
-dtb-$(CONFIG_MACH_SUN7I) += \
-	sun7i-a20-bananapi.dtb \
-	sun7i-a20-bananapi-m1-plus.dtb \
-	sun7i-a20-bananapro.dtb \
-	sun7i-a20-cubieboard2.dtb \
-	sun7i-a20-cubietruck.dtb \
-	sun7i-a20-hummingbird.dtb \
-	sun7i-a20-itead-ibox.dtb \
-	sun7i-a20-i12-tvbox.dtb \
-	sun7i-a20-icnova-swac.dtb \
-	sun7i-a20-lamobo-r1.dtb \
-	sun7i-a20-m3.dtb \
-	sun7i-a20-mk808c.dtb \
-	sun7i-a20-olimex-som-evb.dtb \
-	sun7i-a20-olinuxino-lime.dtb \
-	sun7i-a20-olinuxino-lime2.dtb \
-	sun7i-a20-olinuxino-lime2-emmc.dtb \
-	sun7i-a20-olinuxino-micro.dtb \
-	sun7i-a20-orangepi.dtb \
-	sun7i-a20-orangepi-mini.dtb \
-	sun7i-a20-pcduino3.dtb \
-	sun7i-a20-pcduino3-nano.dtb \
-	sun7i-a20-wexler-tab7200.dtb \
-	sun7i-a20-wits-pro-a20-dkt.dtb
-dtb-$(CONFIG_MACH_SUN8I) += \
-	sun8i-a23-evb.dtb \
-	sun8i-a23-gt90h-v4.dtb \
-	sun8i-a23-inet86dz.dtb \
-	sun8i-a23-ippo-q8h-v5.dtb \
-	sun8i-a23-ippo-q8h-v1.2.dtb \
-	sun8i-a23-polaroid-mid2407pxe03.dtb \
-	sun8i-a23-polaroid-mid2809pxe04.dtb \
-	sun8i-a23-q8-tablet.dtb \
-	sun8i-a33-et-q8-v1.6.dtb \
-	sun8i-a33-ga10h-v1.1.dtb \
-	sun8i-a33-inet-d978-rev2.dtb \
-	sun8i-a33-ippo-q8h-v1.2.dtb \
-	sun8i-a33-olinuxino.dtb \
-	sun8i-a33-q8-tablet.dtb \
-	sun8i-a33-sinlinx-sina33.dtb \
-	sun8i-a83t-allwinner-h8homlet-v2.dtb \
-	sun8i-a83t-cubietruck-plus.dtb \
-	sun8i-h2-plus-orangepi-zero.dtb \
-	sun8i-h3-bananapi-m2-plus.dtb \
-	sun8i-h3-beelink-x2.dtb \
-	sun8i-h3-nanopi-m1.dtb	\
-	sun8i-h3-nanopi-m1-plus.dtb \
-	sun8i-h3-nanopi-neo.dtb \
-	sun8i-h3-nanopi-neo-air.dtb \
-	sun8i-h3-orangepi-2.dtb \
-	sun8i-h3-orangepi-lite.dtb \
-	sun8i-h3-orangepi-one.dtb \
-	sun8i-h3-orangepi-pc.dtb \
-	sun8i-h3-orangepi-pc-plus.dtb \
-	sun8i-h3-orangepi-plus.dtb \
-	sun8i-h3-orangepi-plus2e.dtb \
-	sun8i-r16-parrot.dtb \
-	sun8i-v3s-licheepi-zero.dtb \
-	sun8i-v3s-licheepi-zero-dock.dtb
-dtb-$(CONFIG_MACH_SUN9I) += \
-	sun9i-a80-optimus.dtb \
-	sun9i-a80-cubieboard4.dtb
-dtb-$(CONFIG_ARCH_TANGO) += \
-	tango4-vantage-1172.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
-	tegra20-harmony.dtb \
-	tegra20-iris-512.dtb \
-	tegra20-medcom-wide.dtb \
-	tegra20-paz00.dtb \
-	tegra20-plutux.dtb \
-	tegra20-seaboard.dtb \
-	tegra20-tec.dtb \
-	tegra20-trimslice.dtb \
-	tegra20-ventana.dtb
-dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
-	tegra30-apalis-eval.dtb \
-	tegra30-beaver.dtb \
-	tegra30-cardhu-a02.dtb \
-	tegra30-cardhu-a04.dtb \
-	tegra30-colibri-eval-v3.dtb
-dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \
-	tegra114-dalmore.dtb \
-	tegra114-roth.dtb \
-	tegra114-tn7.dtb
-dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \
-	tegra124-apalis-eval.dtb \
-	tegra124-jetson-tk1.dtb \
-	tegra124-nyan-big.dtb \
-	tegra124-nyan-blaze.dtb \
-	tegra124-venice2.dtb
-dtb-$(CONFIG_ARCH_U300) += \
-	ste-u300.dtb
-dtb-$(CONFIG_ARCH_U8500) += \
-	ste-snowball.dtb \
-	ste-hrefprev60-stuib.dtb \
-	ste-hrefprev60-tvk.dtb \
-	ste-hrefv60plus-stuib.dtb \
-	ste-hrefv60plus-tvk.dtb \
-	ste-ccu8540.dtb \
-	ste-ccu9540.dtb
-dtb-$(CONFIG_ARCH_UNIPHIER) += \
-	uniphier-ld4-ref.dtb \
-	uniphier-ld6b-ref.dtb \
-	uniphier-pro4-ace.dtb \
-	uniphier-pro4-ref.dtb \
-	uniphier-pro4-sanji.dtb \
-	uniphier-pxs2-gentil.dtb \
-	uniphier-pxs2-vodka.dtb \
-	uniphier-sld3-ref.dtb \
-	uniphier-sld8-ref.dtb
-dtb-$(CONFIG_ARCH_VERSATILE) += \
-	versatile-ab.dtb \
-	versatile-pb.dtb
-dtb-$(CONFIG_ARCH_VEXPRESS) += \
-	vexpress-v2p-ca5s.dtb \
-	vexpress-v2p-ca9.dtb \
-	vexpress-v2p-ca15-tc1.dtb \
-	vexpress-v2p-ca15_a7.dtb
-dtb-$(CONFIG_ARCH_VIRT) += \
-	xenvm-4.2.dtb
-dtb-$(CONFIG_ARCH_VT8500) += \
-	vt8500-bv07.dtb \
-	wm8505-ref.dtb \
-	wm8650-mid.dtb \
-	wm8750-apc8750.dtb \
-	wm8850-w70v2.dtb
-dtb-$(CONFIG_ARCH_ZYNQ) += \
-	zynq-microzed.dtb \
-	zynq-parallella.dtb \
-	zynq-zc702.dtb \
-	zynq-zc706.dtb \
-	zynq-zed.dtb \
-	zynq-zybo.dtb
-dtb-$(CONFIG_MACH_ARMADA_370) += \
-	armada-370-db.dtb \
-	armada-370-dlink-dns327l.dtb \
-	armada-370-mirabox.dtb \
-	armada-370-netgear-rn102.dtb \
-	armada-370-netgear-rn104.dtb \
-	armada-370-rd.dtb \
-	armada-370-seagate-nas-2bay.dtb \
-	armada-370-seagate-nas-4bay.dtb \
-	armada-370-seagate-personal-cloud.dtb \
-	armada-370-seagate-personal-cloud-2bay.dtb \
-	armada-370-synology-ds213j.dtb
-dtb-$(CONFIG_MACH_ARMADA_375) += \
-	armada-375-db.dtb
-dtb-$(CONFIG_MACH_ARMADA_38X) += \
-	armada-385-db-ap.dtb \
-	armada-385-linksys-caiman.dtb \
-	armada-385-linksys-cobra.dtb \
-	armada-385-linksys-rango.dtb \
-	armada-385-linksys-shelby.dtb \
-	armada-385-synology-ds116.dtb \
-	armada-385-turris-omnia.dtb \
-	armada-388-clearfog.dtb \
-	armada-388-clearfog-base.dtb \
-	armada-388-clearfog-pro.dtb \
-	armada-388-db.dtb \
-	armada-388-gp.dtb \
-	armada-388-rd.dtb
-dtb-$(CONFIG_MACH_ARMADA_39X) += \
-	armada-398-db.dtb
-dtb-$(CONFIG_MACH_ARMADA_XP) += \
-	armada-xp-axpwifiap.dtb \
-	armada-xp-db.dtb \
-	armada-xp-db-dxbc2.dtb \
-	armada-xp-db-xc3-24g4xg.dtb \
-	armada-xp-gp.dtb \
-	armada-xp-lenovo-ix4-300d.dtb \
-	armada-xp-linksys-mamba.dtb \
-	armada-xp-matrix.dtb \
-	armada-xp-netgear-rn2120.dtb \
-	armada-xp-openblocks-ax3-4.dtb \
-	armada-xp-synology-ds414.dtb
-dtb-$(CONFIG_MACH_DOVE) += \
-	dove-cubox.dtb \
-	dove-cubox-es.dtb \
-	dove-d2plug.dtb \
-	dove-d3plug.dtb \
-	dove-dove-db.dtb \
-	dove-sbc-a510.dtb
-dtb-$(CONFIG_ARCH_MEDIATEK) += \
-	mt2701-evb.dtb \
-	mt6580-evbp1.dtb \
-	mt6589-aquaris5.dtb \
-	mt6592-evb.dtb \
-	mt7623-evb.dtb \
-	mt8127-moose.dtb \
-	mt8135-evbp1.dtb
-dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
-dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-palmetto.dtb \
-	aspeed-bmc-opp-romulus.dtb \
-	aspeed-ast2500-evb.dtb
-endif
-
-dtstree		:= $(srctree)/$(src)
-dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
-
-always		:= $(dtb-y)
-clean-files	:= *.dtb
+# SPDX-License-Identifier: GPL-2.0
+subdir-y += actions
+subdir-y += airoha
+subdir-y += allwinner
+subdir-y += alphascale
+subdir-y += amazon
+subdir-y += amlogic
+subdir-y += arm
+subdir-y += aspeed
+subdir-y += axis
+subdir-y += broadcom
+subdir-y += calxeda
+subdir-y += cirrus
+subdir-y += cnxt
+subdir-y += gemini
+subdir-y += hisilicon
+subdir-y += hpe
+subdir-y += intel
+subdir-y += marvell
+subdir-y += mediatek
+subdir-y += microchip
+subdir-y += moxa
+subdir-y += nspire
+subdir-y += nuvoton
+subdir-y += nvidia
+subdir-y += nxp
+subdir-y += qcom
+subdir-y += realtek
+subdir-y += renesas
+subdir-y += rockchip
+subdir-y += samsung
+subdir-y += sigmastar
+subdir-y += socionext
+subdir-y += st
+subdir-y += sunplus
+subdir-y += synaptics
+subdir-y += ti
+subdir-y += unisoc
+subdir-y += vt8500
+subdir-y += xen
+subdir-y += xilinx
diff --git a/arch/arm/boot/dts/actions/Makefile b/arch/arm/boot/dts/actions/Makefile
new file mode 100644
index 000000000000..f384e4a48e6f
--- /dev/null
+++ b/arch/arm/boot/dts/actions/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ACTIONS) += \
+	owl-s500-cubieboard6.dtb \
+	owl-s500-guitar-bb-rev-b.dtb \
+	owl-s500-labrador-base-m.dtb \
+	owl-s500-roseapplepi.dtb \
+	owl-s500-sparky.dtb
diff --git a/arch/arm/boot/dts/actions/owl-s500-cubieboard6.dts b/arch/arm/boot/dts/actions/owl-s500-cubieboard6.dts
new file mode 100644
index 000000000000..c2b02895910c
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500-cubieboard6.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Cubietech CubieBoard6
+ *
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "owl-s500.dtsi"
+
+/ {
+	compatible = "cubietech,cubieboard6", "actions,s500";
+	model = "CubieBoard6";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000>;
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts b/arch/arm/boot/dts/actions/owl-s500-guitar-bb-rev-b.dts
index 521463d4cac6..7ae34a23e320 100644
--- a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts
+++ b/arch/arm/boot/dts/actions/owl-s500-guitar-bb-rev-b.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2016-2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/owl-s500-guitar.dtsi b/arch/arm/boot/dts/actions/owl-s500-guitar.dtsi
index 079b2c02cc13..81cc39871f17 100644
--- a/arch/arm/boot/dts/owl-s500-guitar.dtsi
+++ b/arch/arm/boot/dts/actions/owl-s500-guitar.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * LeMaker Guitar SoM
  *
  * Copyright (c) 2016-2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
 
 #include "owl-s500.dtsi"
diff --git a/arch/arm/boot/dts/actions/owl-s500-labrador-base-m.dts b/arch/arm/boot/dts/actions/owl-s500-labrador-base-m.dts
new file mode 100644
index 000000000000..1585e33f703b
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500-labrador-base-m.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Caninos Labrador Base Board
+ *
+ * Copyright (c) 2019-2020 Matheus Castello
+ */
+
+/dts-v1/;
+
+#include "owl-s500-labrador-v2.dtsi"
+
+/ {
+	model = "Caninos Labrador Core v2 on Labrador Base-M v1";
+	compatible = "caninos,labrador-base-m",
+		     "caninos,labrador-v2", "actions,s500";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/actions/owl-s500-labrador-v2.dtsi b/arch/arm/boot/dts/actions/owl-s500-labrador-v2.dtsi
new file mode 100644
index 000000000000..883ff2f9886d
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500-labrador-v2.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Caninos Labrador SoM V2
+ *
+ * Copyright (c) 2019-2020 Matheus Castello
+ */
+
+#include "owl-s500.dtsi"
+
+/ {
+	model = "Caninos Labrador Core V2.1";
+	compatible = "caninos,labrador-v2", "actions,s500";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000>;
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
diff --git a/arch/arm/boot/dts/actions/owl-s500-roseapplepi.dts b/arch/arm/boot/dts/actions/owl-s500-roseapplepi.dts
new file mode 100644
index 000000000000..eb555f385283
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500-roseapplepi.dts
@@ -0,0 +1,299 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Roseapple Pi
+ *
+ * Copyright (C) 2020-2021 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "owl-s500.dtsi"
+
+/ {
+	compatible = "roseapplepi,roseapplepi", "actions,s500";
+	model = "Roseapple Pi";
+
+	aliases {
+		mmc0 = &mmc0;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000>; /* 2GB */
+	};
+
+	syspwr: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "SYSPWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	atc260x: pmic@65 {
+		compatible = "actions,atc2603c";
+		reg = <0x65>;
+		interrupt-parent = <&sirq>;
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+
+		reset-time-sec = <6>;
+
+		regulators {
+			compatible = "actions,atc2603c-regulator";
+
+			dcdc1-supply = <&syspwr>;
+			dcdc2-supply = <&syspwr>;
+			dcdc3-supply = <&syspwr>;
+			ldo1-supply = <&syspwr>;
+			ldo2-supply = <&syspwr>;
+			ldo3-supply = <&syspwr>;
+			ldo5-supply = <&syspwr>;
+			ldo6-supply = <&syspwr>;
+			ldo7-supply = <&syspwr>;
+			ldo8-supply = <&syspwr>;
+			ldo11-supply = <&syspwr>;
+			ldo12-supply = <&syspwr>;
+			switchldo1-supply = <&vcc>;
+
+			vdd_cpu: dcdc1 {
+				regulator-name = "VDD_CPU";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+			};
+
+			vddq: dcdc2 {
+				regulator-name = "VDDQ";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <2150000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc: dcdc3 {
+				regulator-name = "VCC";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_3v3: ldo1 {
+				regulator-name = "VCC_3V3";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			avcc: ldo2 {
+				regulator-name = "AVCC";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_1v8: ldo3 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vcc_3v1: ldo5 {
+				regulator-name = "VCC_3V1";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			avdd: ldo6 {
+				regulator-name = "AVDD";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+			};
+
+			sens_1v8: ldo7 {
+				regulator-name = "SENS_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo8: ldo8 {
+				regulator-name = "LDO8";
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			svcc: ldo11 {
+				regulator-name = "SVCC";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			rtc_vdd: ldo12 {
+				regulator-name = "RTC_VDD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			sd_vcc: switchldo1 {
+				regulator-name = "SD_VCC";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+};
+
+&i2c2 {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+};
+
+&pinctrl {
+	i2c0_pins: i2c0-pins {
+		pinmux {
+			groups = "i2c0_mfp";
+			function = "i2c0";
+		};
+
+		pinconf {
+			pins = "i2c0_sclk", "i2c0_sdata";
+			bias-pull-up;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pinconf {
+			pins = "i2c1_sclk", "i2c1_sdata";
+			bias-pull-up;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pinconf {
+			pins = "i2c2_sclk", "i2c2_sdata";
+			bias-pull-up;
+		};
+	};
+
+	mmc0_pins: mmc0-pins {
+		pinmux {
+			groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
+				 "sd0_cmd_mfp", "sd0_clk_mfp";
+			function = "sd0";
+		};
+
+		drv-pinconf {
+			groups = "sd0_d0_d3_drv", "sd0_cmd_drv", "sd0_clk_drv";
+			drive-strength = <8>;
+		};
+
+		bias0-pinconf {
+			pins = "sd0_d0", "sd0_d1", "sd0_d2",
+			       "sd0_d3", "sd0_cmd";
+			bias-pull-up;
+		};
+
+		bias1-pinconf {
+			pins = "sd0_clk";
+			bias-pull-down;
+		};
+	};
+
+	ethernet_pins: ethernet-pins {
+		eth_rmii-pinmux {
+			groups = "rmii_txd0_mfp", "rmii_txd1_mfp",
+				 "rmii_rxd0_mfp", "rmii_rxd1_mfp",
+				 "rmii_txen_mfp", "rmii_rxen_mfp",
+				 "rmii_crs_dv_mfp", "rmii_ref_clk_mfp";
+			function = "eth_rmii";
+		};
+
+		phy_clk-pinmux {
+			groups = "clko_25m_mfp";
+			function = "clko_25m";
+		};
+
+		ref_clk-pinconf {
+			groups = "rmii_ref_clk_drv";
+			drive-strength = <2>;
+		};
+
+	};
+};
+
+/* uSD */
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	no-sdio;
+	no-mmc;
+	no-1-8-v;
+	cd-gpios = <&pinctrl 117 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&sd_vcc>;
+	vqmmc-supply = <&sd_vcc>;
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+	phy-mode = "rmii";
+	phy-handle = <&eth_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&pinctrl 88 GPIO_ACTIVE_LOW>; /* GPIOC24 */
+		reset-delay-us = <10000>;
+		reset-post-delay-us = <150000>;
+
+		eth_phy: ethernet-phy@3 {
+			reg = <0x3>;
+			max-speed = <100>;
+			interrupt-parent = <&sirq>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&twd_timer {
+	status = "okay";
+};
+
+&timer {
+	clocks = <&hosc>;
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/actions/owl-s500-sparky.dts b/arch/arm/boot/dts/actions/owl-s500-sparky.dts
new file mode 100644
index 000000000000..9d8f7336bec0
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500-sparky.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Allo.com Sparky
+ *
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "owl-s500.dtsi"
+
+/ {
+	compatible = "allo,sparky", "actions,s500";
+	model = "Allo.com Sparky";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1 or 2 GiB */
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/actions/owl-s500.dtsi b/arch/arm/boot/dts/actions/owl-s500.dtsi
new file mode 100644
index 000000000000..739b4b9cec8c
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500.dtsi
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Actions Semi S500 SoC
+ *
+ * Copyright (c) 2016-2017 Andreas Färber
+ */
+
+#include <dt-bindings/clock/actions,s500-cmu.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/owl-s500-powergate.h>
+#include <dt-bindings/reset/actions,s500-reset.h>
+
+/ {
+	compatible = "actions,s500";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+	};
+
+	chosen {
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x0>;
+			enable-method = "actions,s500-smp";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x1>;
+			enable-method = "actions,s500-smp";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x2>;
+			enable-method = "actions,s500-smp";
+			power-domains = <&sps S500_PD_CPU2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x3>;
+			enable-method = "actions,s500-smp";
+			power-domains = <&sps S500_PD_CPU3>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	hosc: hosc {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+	losc: losc {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		scu: scu@b0020000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xb0020000 0x100>;
+		};
+
+		global_timer: timer@b0020200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0xb0020200 0x100>;
+			interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			status = "disabled";
+		};
+
+		twd_timer: timer@b0020600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xb0020600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			status = "disabled";
+		};
+
+		twd_wdt: wdt@b0020620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0xb0020620 0xe0>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@b0021000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0xb0021000 0x1000>,
+			      <0xb0020100 0x0100>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		l2: cache-controller@b0022000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xb0022000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			arm,tag-latency = <3 3 2>;
+			arm,data-latency = <5 3 3>;
+		};
+
+		uart0: serial@b0120000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0120000 0x2000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@b0122000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0122000 0x2000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@b0124000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0124000 0x2000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@b0126000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0126000 0x2000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@b0128000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0128000 0x2000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@b012a000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb012a000 0x2000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@b012c000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb012c000 0x2000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART6>;
+			status = "disabled";
+		};
+
+		cmu: clock-controller@b0160000 {
+			compatible = "actions,s500-cmu";
+			reg = <0xb0160000 0x8000>;
+			clocks = <&hosc>, <&losc>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		i2c0: i2c@b0170000 {
+			compatible = "actions,s500-i2c";
+			reg = <0xb0170000 0x4000>;
+			clocks = <&cmu CLK_I2C0>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@b0174000 {
+			compatible = "actions,s500-i2c";
+			reg = <0xb0174000 0x4000>;
+			clocks = <&cmu CLK_I2C1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@b0178000 {
+			compatible = "actions,s500-i2c";
+			reg = <0xb0178000 0x4000>;
+			clocks = <&cmu CLK_I2C2>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@b017c000 {
+			compatible = "actions,s500-i2c";
+			reg = <0xb017c000 0x4000>;
+			clocks = <&cmu CLK_I2C3>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sirq: interrupt-controller@b01b0200 {
+			compatible = "actions,s500-sirq";
+			reg = <0xb01b0200 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ0 */
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ1 */
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; /* SIRQ2 */
+		};
+
+		timer: timer@b0168000 {
+			compatible = "actions,s500-timer";
+			reg = <0xb0168000 0x8000>;
+			interrupts = <GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "2hz0", "2hz1", "timer0", "timer1";
+		};
+
+		sps: power-controller@b01b0100 {
+			compatible = "actions,s500-sps";
+			reg = <0xb01b0100 0x100>;
+			#power-domain-cells = <1>;
+		};
+
+		pinctrl: pinctrl@b01b0000 {
+			compatible = "actions,s500-pinctrl";
+			reg = <0xb01b0000 0x40>, /* GPIO */
+			      <0xb01b0040 0x10>, /* Multiplexing Control */
+			      <0xb01b0060 0x18>, /* PAD Control */
+			      <0xb01b0080 0xc>;  /* PAD Drive Capacity */
+			clocks = <&cmu CLK_GPIO>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 132>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* GPIOA */
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* GPIOB */
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* GPIOC */
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, /* GPIOD */
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; /* GPIOE */
+		};
+
+		dma: dma-controller@b0260000 {
+			compatible = "actions,s500-dma";
+			reg = <0xb0260000 0xd00>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <12>;
+			dma-requests = <46>;
+			clocks = <&cmu CLK_DMAC>;
+			power-domains = <&sps S500_PD_DMA>;
+		};
+
+		mmc0: mmc@b0230000 {
+			compatible = "actions,s500-mmc", "actions,owl-mmc";
+			reg = <0xb0230000 0x38>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD0>;
+			resets = <&cmu RESET_SD0>;
+			dmas = <&dma 2>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc1: mmc@b0234000 {
+			compatible = "actions,s500-mmc", "actions,owl-mmc";
+			reg = <0xb0234000 0x38>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD1>;
+			resets = <&cmu RESET_SD1>;
+			dmas = <&dma 3>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc2: mmc@b0238000 {
+			compatible = "actions,s500-mmc", "actions,owl-mmc";
+			reg = <0xb0238000 0x38>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD2>;
+			resets = <&cmu RESET_SD2>;
+			dmas = <&dma 4>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		ethernet: ethernet@b0310000 {
+			compatible = "actions,s500-emac", "actions,owl-emac";
+			reg = <0xb0310000 0x10000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_ETHERNET>, <&cmu CLK_RMII_REF>;
+			clock-names = "eth", "rmii";
+			resets = <&cmu RESET_ETHERNET>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/airoha/Makefile b/arch/arm/boot/dts/airoha/Makefile
new file mode 100644
index 000000000000..00c31389f622
--- /dev/null
+++ b/arch/arm/boot/dts/airoha/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_AIROHA) += \
+	en7523-evb.dtb
diff --git a/arch/arm/boot/dts/airoha/en7523-evb.dts b/arch/arm/boot/dts/airoha/en7523-evb.dts
new file mode 100644
index 000000000000..f23a25cce119
--- /dev/null
+++ b/arch/arm/boot/dts/airoha/en7523-evb.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+/* Bootloader installs ATF here */
+/memreserve/ 0x80000000 0x200000;
+
+#include "en7523.dtsi"
+
+/ {
+	model = "Airoha EN7523 Evaluation Board";
+	compatible = "airoha,en7523-evb", "airoha,en7523";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+		stdout-path = "serial0:115200n8";
+		linux,usable-memory-range = <0x80200000 0x1fe00000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/airoha/en7523.dtsi b/arch/arm/boot/dts/airoha/en7523.dtsi
new file mode 100644
index 000000000000..b523a868c4ad
--- /dev/null
+++ b/arch/arm/boot/dts/airoha/en7523.dtsi
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/en7523-clk.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		npu_binary@84000000 {
+			no-map;
+			reg = <0x84000000 0xA00000>;
+		};
+
+		npu_flag@84B0000 {
+			no-map;
+			reg = <0x84B00000 0x100000>;
+		};
+
+		npu_pkt@85000000 {
+			no-map;
+			reg = <0x85000000 0x1A00000>;
+		};
+
+		npu_phyaddr@86B00000 {
+			no-map;
+			reg = <0x86B00000 0x100000>;
+		};
+
+		npu_rxdesc@86D00000 {
+			no-map;
+			reg = <0x86D00000 0x100000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	scu: system-controller@1fa20000 {
+		compatible = "airoha,en7523-scu";
+		reg = <0x1fa20000 0x400>,
+		      <0x1fb00000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	gic: interrupt-controller@9000000 {
+		compatible = "arm,gic-v3";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x09000000 0x20000>,
+		      <0x09080000 0x80000>,
+		      <0x09400000 0x2000>,
+		      <0x09500000 0x2000>,
+		      <0x09600000 0x20000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	uart1: serial@1fbf0000 {
+		compatible = "ns16550";
+		reg = <0x1fbf0000 0x30>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <1843200>;
+		status = "okay";
+	};
+
+	gpio0: gpio@1fbf0200 {
+		compatible = "airoha,en7523-gpio";
+		reg = <0x1fbf0204 0x4>,
+		      <0x1fbf0200 0x4>,
+		      <0x1fbf0220 0x4>,
+		      <0x1fbf0214 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio1: gpio@1fbf0270 {
+		compatible = "airoha,en7523-gpio";
+		reg = <0x1fbf0270 0x4>,
+		      <0x1fbf0260 0x4>,
+		      <0x1fbf0264 0x4>,
+		      <0x1fbf0278 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pcie0: pcie@1fa91000 {
+		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0x1fa91000 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&scu EN7523_CLK_PCIE>;
+		clock-names = "sys_ck0";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000  0x20000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	pcie1: pcie@1fa92000 {
+		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0x1fa92000 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&scu EN7523_CLK_PCIE>;
+		clock-names = "sys_ck1";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x28000000  0x28000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/Makefile b/arch/arm/boot/dts/allwinner/Makefile
new file mode 100644
index 000000000000..f71392a55df8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/Makefile
@@ -0,0 +1,283 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MACH_SUN4I) += \
+	sun4i-a10-a1000.dtb \
+	sun4i-a10-ba10-tvbox.dtb \
+	sun4i-a10-chuwi-v7-cw0825.dtb \
+	sun4i-a10-cubieboard.dtb \
+	sun4i-a10-dserve-dsrv9703c.dtb \
+	sun4i-a10-gemei-g9.dtb \
+	sun4i-a10-hackberry.dtb \
+	sun4i-a10-hyundai-a7hd.dtb \
+	sun4i-a10-inet1.dtb \
+	sun4i-a10-inet97fv2.dtb \
+	sun4i-a10-inet9f-rev03.dtb \
+	sun4i-a10-itead-iteaduino-plus.dtb \
+	sun4i-a10-jesurun-q5.dtb \
+	sun4i-a10-marsboard.dtb \
+	sun4i-a10-mini-xplus.dtb \
+	sun4i-a10-mk802.dtb \
+	sun4i-a10-mk802ii.dtb \
+	sun4i-a10-olinuxino-lime.dtb \
+	sun4i-a10-pcduino.dtb \
+	sun4i-a10-pcduino2.dtb \
+	sun4i-a10-pov-protab2-ips9.dtb \
+	sun4i-a10-topwise-a721.dtb
+dtb-$(CONFIG_MACH_SUN4I) += \
+	sun4i-a10-a1000.dtb \
+	sun4i-a10-ba10-tvbox.dtb \
+	sun4i-a10-chuwi-v7-cw0825.dtb \
+	sun4i-a10-cubieboard.dtb \
+	sun4i-a10-dserve-dsrv9703c.dtb \
+	sun4i-a10-gemei-g9.dtb \
+	sun4i-a10-hackberry.dtb \
+	sun4i-a10-hyundai-a7hd.dtb \
+	sun4i-a10-inet1.dtb \
+	sun4i-a10-inet97fv2.dtb \
+	sun4i-a10-inet9f-rev03.dtb \
+	sun4i-a10-itead-iteaduino-plus.dtb \
+	sun4i-a10-jesurun-q5.dtb \
+	sun4i-a10-marsboard.dtb \
+	sun4i-a10-mini-xplus.dtb \
+	sun4i-a10-mk802.dtb \
+	sun4i-a10-mk802ii.dtb \
+	sun4i-a10-olinuxino-lime.dtb \
+	sun4i-a10-pcduino.dtb \
+	sun4i-a10-pcduino2.dtb \
+	sun4i-a10-pov-protab2-ips9.dtb \
+	sun4i-a10-topwise-a721.dtb
+dtb-$(CONFIG_MACH_SUN5I) += \
+	sun5i-a10s-auxtek-t003.dtb \
+	sun5i-a10s-auxtek-t004.dtb \
+	sun5i-a10s-mk802.dtb \
+	sun5i-a10s-olinuxino-micro.dtb \
+	sun5i-a10s-r7-tv-dongle.dtb \
+	sun5i-a10s-wobo-i5.dtb \
+	sun5i-a13-difrnce-dit4350.dtb \
+	sun5i-a13-empire-electronix-d709.dtb \
+	sun5i-a13-empire-electronix-m712.dtb \
+	sun5i-a13-hsg-h702.dtb \
+	sun5i-a13-inet-98v-rev2.dtb \
+	sun5i-a13-licheepi-one.dtb \
+	sun5i-a13-olinuxino.dtb \
+	sun5i-a13-olinuxino-micro.dtb \
+	sun5i-a13-pocketbook-touch-lux-3.dtb \
+	sun5i-a13-pocketbook-614-plus.dtb \
+	sun5i-a13-q8-tablet.dtb \
+	sun5i-a13-utoo-p66.dtb \
+	sun5i-gr8-chip-pro.dtb \
+	sun5i-gr8-evb.dtb \
+	sun5i-r8-chip.dtb
+dtb-$(CONFIG_MACH_SUN5I) += \
+	sun5i-a10s-auxtek-t003.dtb \
+	sun5i-a10s-auxtek-t004.dtb \
+	sun5i-a10s-mk802.dtb \
+	sun5i-a10s-olinuxino-micro.dtb \
+	sun5i-a10s-r7-tv-dongle.dtb \
+	sun5i-a10s-wobo-i5.dtb \
+	sun5i-a13-difrnce-dit4350.dtb \
+	sun5i-a13-empire-electronix-d709.dtb \
+	sun5i-a13-empire-electronix-m712.dtb \
+	sun5i-a13-hsg-h702.dtb \
+	sun5i-a13-inet-98v-rev2.dtb \
+	sun5i-a13-licheepi-one.dtb \
+	sun5i-a13-olinuxino.dtb \
+	sun5i-a13-olinuxino-micro.dtb \
+	sun5i-a13-pocketbook-touch-lux-3.dtb \
+	sun5i-a13-q8-tablet.dtb \
+	sun5i-a13-utoo-p66.dtb \
+	sun5i-gr8-chip-pro.dtb \
+	sun5i-gr8-evb.dtb \
+	sun5i-r8-chip.dtb
+dtb-$(CONFIG_MACH_SUN6I) += \
+	sun6i-a31-app4-evb1.dtb \
+	sun6i-a31-colombus.dtb \
+	sun6i-a31-hummingbird.dtb \
+	sun6i-a31-i7.dtb \
+	sun6i-a31-m9.dtb \
+	sun6i-a31-mele-a1000g-quad.dtb \
+	sun6i-a31s-colorfly-e708-q1.dtb \
+	sun6i-a31s-cs908.dtb \
+	sun6i-a31s-inet-q972.dtb \
+	sun6i-a31s-primo81.dtb \
+	sun6i-a31s-sina31s.dtb \
+	sun6i-a31s-sinovoip-bpi-m2.dtb \
+	sun6i-a31s-yones-toptech-bs1078-v2.dtb
+dtb-$(CONFIG_MACH_SUN6I) += \
+	sun6i-a31-app4-evb1.dtb \
+	sun6i-a31-colombus.dtb \
+	sun6i-a31-hummingbird.dtb \
+	sun6i-a31-i7.dtb \
+	sun6i-a31-m9.dtb \
+	sun6i-a31-mele-a1000g-quad.dtb \
+	sun6i-a31s-colorfly-e708-q1.dtb \
+	sun6i-a31s-cs908.dtb \
+	sun6i-a31s-inet-q972.dtb \
+	sun6i-a31s-primo81.dtb \
+	sun6i-a31s-sina31s.dtb \
+	sun6i-a31s-sinovoip-bpi-m2.dtb \
+	sun6i-a31s-yones-toptech-bs1078-v2.dtb
+dtb-$(CONFIG_MACH_SUN7I) += \
+	sun7i-a20-bananapi.dtb \
+	sun7i-a20-bananapi-m1-plus.dtb \
+	sun7i-a20-bananapro.dtb \
+	sun7i-a20-cubieboard2.dtb \
+	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-haoyu-marsboard.dtb \
+	sun7i-a20-hummingbird.dtb \
+	sun7i-a20-itead-ibox.dtb \
+	sun7i-a20-i12-tvbox.dtb \
+	sun7i-a20-icnova-a20-adb4006.dtb \
+	sun7i-a20-icnova-swac.dtb \
+	sun7i-a20-lamobo-r1.dtb \
+	sun7i-a20-linutronix-testbox-v2.dtb \
+	sun7i-a20-m3.dtb \
+	sun7i-a20-mk808c.dtb \
+	sun7i-a20-olimex-som-evb.dtb \
+	sun7i-a20-olimex-som-evb-emmc.dtb \
+	sun7i-a20-olimex-som204-evb.dtb \
+	sun7i-a20-olimex-som204-evb-emmc.dtb \
+	sun7i-a20-olinuxino-lime.dtb \
+	sun7i-a20-olinuxino-lime-emmc.dtb \
+	sun7i-a20-olinuxino-lime2.dtb \
+	sun7i-a20-olinuxino-lime2-emmc.dtb \
+	sun7i-a20-olinuxino-micro.dtb \
+	sun7i-a20-olinuxino-micro-emmc.dtb \
+	sun7i-a20-orangepi.dtb \
+	sun7i-a20-orangepi-mini.dtb \
+	sun7i-a20-pcduino3.dtb \
+	sun7i-a20-pcduino3-nano.dtb \
+	sun7i-a20-wexler-tab7200.dtb \
+	sun7i-a20-wits-pro-a20-dkt.dtb
+dtb-$(CONFIG_MACH_SUN7I) += \
+	sun7i-a20-bananapi.dtb \
+	sun7i-a20-bananapi-m1-plus.dtb \
+	sun7i-a20-bananapro.dtb \
+	sun7i-a20-cubieboard2.dtb \
+	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-haoyu-marsboard.dtb \
+	sun7i-a20-hummingbird.dtb \
+	sun7i-a20-itead-ibox.dtb \
+	sun7i-a20-i12-tvbox.dtb \
+	sun7i-a20-icnova-a20-adb4006.dtb \
+	sun7i-a20-icnova-swac.dtb \
+	sun7i-a20-lamobo-r1.dtb \
+	sun7i-a20-linutronix-testbox-v2.dtb \
+	sun7i-a20-m3.dtb \
+	sun7i-a20-mk808c.dtb \
+	sun7i-a20-olimex-som-evb.dtb \
+	sun7i-a20-olimex-som-evb-emmc.dtb \
+	sun7i-a20-olimex-som204-evb.dtb \
+	sun7i-a20-olimex-som204-evb-emmc.dtb \
+	sun7i-a20-olinuxino-lime.dtb \
+	sun7i-a20-olinuxino-lime-emmc.dtb \
+	sun7i-a20-olinuxino-lime2.dtb \
+	sun7i-a20-olinuxino-lime2-emmc.dtb \
+	sun7i-a20-olinuxino-micro.dtb \
+	sun7i-a20-olinuxino-micro-emmc.dtb \
+	sun7i-a20-orangepi.dtb \
+	sun7i-a20-orangepi-mini.dtb \
+	sun7i-a20-pcduino3.dtb \
+	sun7i-a20-pcduino3-nano.dtb \
+	sun7i-a20-wexler-tab7200.dtb \
+	sun7i-a20-wits-pro-a20-dkt.dtb
+
+# Enables support for device-tree overlays for all pis
+DTC_FLAGS_sun8i-h2-plus-orangepi-zero := -@
+DTC_FLAGS_sun8i-h3-orangepi-lite := -@
+DTC_FLAGS_sun8i-h3-bananapi-m2-plus := -@
+DTC_FLAGS_sun8i-h3-nanopi-m1-plus := -@
+DTC_FLAGS_sun8i-h3-nanopi-m1 := -@
+DTC_FLAGS_sun8i-h3-nanopi-duo2 := -@
+DTC_FLAGS_sun8i-h3-orangepi-plus2e := -@
+DTC_FLAGS_sun8i-h3-orangepi-one := -@
+DTC_FLAGS_sun8i-h3-orangepi-plus := -@
+DTC_FLAGS_sun8i-h3-orangepi-2 := -@
+DTC_FLAGS_sun8i-h3-orangepi-zero-plus2 := -@
+DTC_FLAGS_sun8i-h3-nanopi-neo-air := -@
+DTC_FLAGS_sun8i-h3-zeropi := -@
+DTC_FLAGS_sun8i-h3-nanopi-neo := -@
+DTC_FLAGS_sun8i-h3-nanopi-r1 := -@
+DTC_FLAGS_sun8i-h3-orangepi-pc := -@
+DTC_FLAGS_sun8i-h3-bananapi-m2-plus-v1.2 := -@
+DTC_FLAGS_sun8i-h3-orangepi-pc-plus := -@
+DTC_FLAGS_sun8i-t113s-netcube-nagami-basic-carrier := -@
+DTC_FLAGS_sun8i-v3s-netcube-kumquat := -@
+dtb-$(CONFIG_MACH_SUN8I) += \
+	sun8i-a23-evb.dtb \
+	sun8i-a23-gt90h-v4.dtb \
+	sun8i-a23-inet86dz.dtb \
+	sun8i-a23-ippo-q8h-v5.dtb \
+	sun8i-a23-ippo-q8h-v1.2.dtb \
+	sun8i-a23-polaroid-mid2407pxe03.dtb \
+	sun8i-a23-polaroid-mid2809pxe04.dtb \
+	sun8i-a23-q8-tablet.dtb \
+	sun8i-a33-et-q8-v1.6.dtb \
+	sun8i-a33-ga10h-v1.1.dtb \
+	sun8i-a33-inet-d978-rev2.dtb \
+	sun8i-a33-ippo-q8h-v1.2.dtb \
+	sun8i-a33-olinuxino.dtb \
+	sun8i-a33-q8-tablet.dtb \
+	sun8i-a33-sinlinx-sina33.dtb \
+	sun8i-a33-vstar.dtb \
+	sun8i-a83t-allwinner-h8homlet-v2.dtb \
+	sun8i-a83t-bananapi-m3.dtb \
+	sun8i-a83t-cubietruck-plus.dtb \
+	sun8i-a83t-tbs-a711.dtb \
+	sun8i-h2-plus-bananapi-m2-zero.dtb \
+	sun8i-h2-plus-libretech-all-h3-cc.dtb \
+	sun8i-h2-plus-orangepi-r1.dtb \
+	sun8i-h2-plus-orangepi-zero.dtb \
+	sun8i-h2-plus-orangepi-zero-interface-board.dtb \
+	sun8i-h3-bananapi-m2-plus.dtb \
+	sun8i-h3-bananapi-m2-plus-v1.2.dtb \
+	sun8i-h3-beelink-x2.dtb \
+	sun8i-h3-libretech-all-h3-cc.dtb \
+	sun8i-h3-mapleboard-mp130.dtb \
+	sun8i-h3-nanopi-duo2.dtb \
+	sun8i-h3-nanopi-m1.dtb \
+	sun8i-h3-nanopi-m1-plus.dtb \
+	sun8i-h3-nanopi-neo.dtb \
+	sun8i-h3-nanopi-neo-air.dtb \
+	sun8i-h3-nanopi-r1.dtb \
+	sun8i-h3-orangepi-2.dtb \
+	sun8i-h3-orangepi-lite.dtb \
+	sun8i-h3-orangepi-one.dtb \
+	sun8i-h3-orangepi-pc.dtb \
+	sun8i-h3-orangepi-pc-plus.dtb \
+	sun8i-h3-orangepi-plus.dtb \
+	sun8i-h3-orangepi-plus2e.dtb \
+	sun8i-h3-orangepi-zero-plus2.dtb \
+	sun8i-h3-orangepi-zero-plus2-interface-board.dtb \
+	sun8i-h3-rervision-dvk.dtb \
+	sun8i-h3-zeropi.dtb \
+	sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
+	sun8i-r16-bananapi-m2m.dtb \
+	sun8i-r16-nintendo-nes-classic.dtb \
+	sun8i-r16-nintendo-super-nes-classic.dtb \
+	sun8i-r16-parrot.dtb \
+	sun8i-r40-bananapi-m2-ultra.dtb \
+	sun8i-r40-oka40i-c.dtb \
+	sun8i-s3-elimo-initium.dtb \
+	sun8i-s3-lichee-zero-plus.dtb \
+	sun8i-s3-pinecube.dtb \
+	sun8i-t113s-mangopi-mq-r-t113.dtb \
+	sun8i-t113s-netcube-nagami-basic-carrier.dtb \
+	sun8i-t113s-netcube-nagami-keypad-carrier.dtb \
+	sun8i-t3-cqa3t-bv3.dtb \
+	sun8i-v3-sl631-imx179.dtb \
+	sun8i-v3s-anbernic-rg-nano.dtb \
+	sun8i-v3s-licheepi-zero.dtb \
+	sun8i-v3s-licheepi-zero-dock.dtb \
+	sun8i-v3s-netcube-kumquat.dtb \
+	sun8i-v40-bananapi-m2-berry.dtb
+sun8i-h2-plus-orangepi-zero-interface-board-dtbs += \
+	sun8i-h2-plus-orangepi-zero.dtb sun8i-orangepi-zero-interface-board.dtbo
+sun8i-h3-orangepi-zero-plus2-interface-board-dtbs += \
+	sun8i-h3-orangepi-zero-plus2.dtb sun8i-orangepi-zero-interface-board.dtbo
+dtb-$(CONFIG_MACH_SUN9I) += \
+	sun9i-a80-optimus.dtb \
+	sun9i-a80-cubieboard4.dtb
+dtb-$(CONFIG_MACH_SUNIV) += \
+	suniv-f1c100s-licheepi-nano.dtb \
+	suniv-f1c200s-lctech-pi.dtb \
+	suniv-f1c200s-popstick-v1.1.dtb
diff --git a/arch/arm/boot/dts/axp152.dtsi b/arch/arm/boot/dts/allwinner/axp152.dtsi
index f90ad6c64a07..f90ad6c64a07 100644
--- a/arch/arm/boot/dts/axp152.dtsi
+++ b/arch/arm/boot/dts/allwinner/axp152.dtsi
diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/allwinner/axp209.dtsi
index 3c8fa26e87b7..469d0f7d5185 100644
--- a/arch/arm/boot/dts/axp209.dtsi
+++ b/arch/arm/boot/dts/allwinner/axp209.dtsi
@@ -48,23 +48,35 @@
  * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf
  */
 
+/ {
+	pmic-temp {
+		compatible = "iio-hwmon";
+		io-channels = <&axp_adc 4>; /* Internal temperature */
+	};
+};
+
 &axp209 {
 	compatible = "x-powers,axp209";
 	interrupt-controller;
 	#interrupt-cells = <1>;
 
-	ac_power_supply: ac-power-supply {
+	ac_power_supply: ac-power {
 		compatible = "x-powers,axp202-ac-power-supply";
 		status = "disabled";
 	};
 
+	axp_adc: adc {
+		compatible = "x-powers,axp209-adc";
+		#io-channel-cells = <1>;
+	};
+
 	axp_gpio: gpio {
 		compatible = "x-powers,axp209-gpio";
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	battery_power_supply: battery-power-supply {
+	battery_power_supply: battery-power {
 		compatible = "x-powers,axp209-battery-power-supply";
 		status = "disabled";
 	};
@@ -107,7 +119,7 @@
 		};
 	};
 
-	usb_power_supply: usb_power_supply {
+	usb_power_supply: usb-power {
 		compatible = "x-powers,axp202-usb-power-supply";
 		status = "disabled";
 	};
diff --git a/arch/arm/boot/dts/axp223.dtsi b/arch/arm/boot/dts/allwinner/axp223.dtsi
index b91b6c1278c7..b91b6c1278c7 100644
--- a/arch/arm/boot/dts/axp223.dtsi
+++ b/arch/arm/boot/dts/allwinner/axp223.dtsi
diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/allwinner/axp22x.dtsi
index 87fb08e812ec..f79650afd0a7 100644
--- a/arch/arm/boot/dts/axp22x.dtsi
+++ b/arch/arm/boot/dts/allwinner/axp22x.dtsi
@@ -52,16 +52,27 @@
 	interrupt-controller;
 	#interrupt-cells = <1>;
 
-	ac_power_supply: ac-power-supply {
+	ac_power_supply: ac-power {
 		compatible = "x-powers,axp221-ac-power-supply";
 		status = "disabled";
 	};
 
-	battery_power_supply: battery-power-supply {
+	axp_adc: adc {
+		compatible = "x-powers,axp221-adc";
+		#io-channel-cells = <1>;
+	};
+
+	battery_power_supply: battery-power {
 		compatible = "x-powers,axp221-battery-power-supply";
 		status = "disabled";
 	};
 
+	axp_gpio: gpio {
+		compatible = "x-powers,axp221-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	regulators {
 		/* Default work frequency for buck regulators */
 		x-powers,dcdc-freq = <3000>;
@@ -158,7 +169,7 @@
 		};
 	};
 
-	usb_power_supply: usb_power_supply {
+	usb_power_supply: usb-power {
 		compatible = "x-powers,axp221-usb-power-supply";
 		status = "disabled";
 	};
diff --git a/arch/arm/boot/dts/axp809.dtsi b/arch/arm/boot/dts/allwinner/axp809.dtsi
index ab8e5f2d9246..d134d4c00bd8 100644
--- a/arch/arm/boot/dts/axp809.dtsi
+++ b/arch/arm/boot/dts/allwinner/axp809.dtsi
@@ -50,4 +50,11 @@
 	compatible = "x-powers,axp809";
 	interrupt-controller;
 	#interrupt-cells = <1>;
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp809-gpio",
+			     "x-powers,axp221-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
diff --git a/arch/arm/boot/dts/allwinner/axp81x.dtsi b/arch/arm/boot/dts/allwinner/axp81x.dtsi
new file mode 100644
index 000000000000..ebaf1c3ce8db
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/axp81x.dtsi
@@ -0,0 +1,164 @@
+/*
+ * Copyright 2017 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* AXP813/818 Integrated Power Management Chip */
+
+&axp81x {
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	ac_power_supply: ac-power {
+		compatible = "x-powers,axp813-ac-power-supply";
+		status = "disabled";
+	};
+
+	axp_adc: adc {
+		compatible = "x-powers,axp813-adc";
+		#io-channel-cells = <1>;
+	};
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp813-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	battery_power_supply: battery-power {
+		compatible = "x-powers,axp813-battery-power-supply";
+		status = "disabled";
+	};
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <3000>;
+
+		reg_dcdc1: dcdc1 {
+		};
+
+		reg_dcdc2: dcdc2 {
+		};
+
+		reg_dcdc3: dcdc3 {
+		};
+
+		reg_dcdc4: dcdc4 {
+		};
+
+		reg_dcdc5: dcdc5 {
+		};
+
+		reg_dcdc6: dcdc6 {
+		};
+
+		reg_dcdc7: dcdc7 {
+		};
+
+		reg_aldo1: aldo1 {
+		};
+
+		reg_aldo2: aldo2 {
+		};
+
+		reg_aldo3: aldo3 {
+		};
+
+		reg_dldo1: dldo1 {
+		};
+
+		reg_dldo2: dldo2 {
+		};
+
+		reg_dldo3: dldo3 {
+		};
+
+		reg_dldo4: dldo4 {
+		};
+
+		reg_eldo1: eldo1 {
+		};
+
+		reg_eldo2: eldo2 {
+		};
+
+		reg_eldo3: eldo3 {
+		};
+
+		reg_fldo1: fldo1 {
+		};
+
+		reg_fldo2: fldo2 {
+		};
+
+		reg_fldo3: fldo3 {
+		};
+
+		reg_ldo_io0: ldo-io0 {
+			/* Disable by default to avoid conflicts with GPIO */
+			status = "disabled";
+		};
+
+		reg_ldo_io1: ldo-io1 {
+			/* Disable by default to avoid conflicts with GPIO */
+			status = "disabled";
+		};
+
+		reg_rtc_ldo: rtc-ldo {
+			/* RTC_LDO is a fixed, always-on regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		reg_sw: sw {
+		};
+
+		reg_drivevbus: drivevbus {
+			status = "disabled";
+		};
+	};
+
+	usb_power_supply: usb-power {
+		compatible = "x-powers,axp813-usb-power-supply";
+	};
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-a1000.dts
index f80d37ddc4c6..20f9ed244851 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-a1000.dts
@@ -60,17 +60,26 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_a1000>;
 
-		red {
+		led-0 {
 			label = "a1000:red:usr";
 			gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		blue {
+		led-1 {
 			label = "a1000:blue:pwr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -79,8 +88,6 @@
 
 	reg_emac_3v3: emac-3v3 {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&emac_power_pin_a1000>;
 		regulator-name = "emac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -129,9 +136,7 @@
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_a>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	status = "okay";
 };
 
@@ -139,9 +144,21 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -156,7 +173,7 @@
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pins>;
 	status = "okay";
 };
 
@@ -170,12 +187,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -187,18 +201,6 @@
 	status = "okay";
 };
 
-&pio {
-	emac_power_pin_a1000: emac_power_pin@0 {
-		pins = "PH15";
-		function = "gpio_out";
-	};
-
-	led_pins_a1000: led_pins@0 {
-		pins = "PH10", "PH20";
-		function = "gpio_out";
-	};
-};
-
 #include "axp209.dtsi"
 
 &reg_dcdc2 {
@@ -236,13 +238,13 @@
 
 &spdif {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spdif_tx_pins_a>;
+	pinctrl-0 = <&spdif_tx_pin>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-ba10-tvbox.dts
index 6b02de592a02..816d534ac093 100644
--- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-ba10-tvbox.dts
@@ -68,9 +68,7 @@
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_a>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	status = "okay";
 };
 
@@ -79,8 +77,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -95,7 +91,7 @@
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pins>;
 	status = "okay";
 };
 
@@ -108,12 +104,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -125,12 +118,6 @@
 	status = "okay";
 };
 
-&pio {
-	usb2_vbus_pin_a: usb2_vbus_pin@0 {
-		pins = "PH12";
-	};
-};
-
 &reg_usb0_vbus {
 	regulator-boot-on;
 	status = "okay";
@@ -147,7 +134,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-chuwi-v7-cw0825.dts
index a7d61994b8fd..74262988881c 100644
--- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-chuwi-v7-cw0825.dts
@@ -65,8 +65,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -80,14 +78,10 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 
 	ft5306de4: touchscreen@38 {
@@ -104,21 +98,21 @@
 	vref-supply = <&reg_vcc3v0>;
 	status = "okay";
 
-	button@800 {
+	button-800 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <800000>;
 	};
 
-	button@1000 {
+	button-1000 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
 		voltage = <1000000>;
 	};
 
-	button@1200 {
+	button-1200 {
 		label = "Back";
 		linux,code = <KEY_BACK>;
 		channel = <0>;
@@ -127,12 +121,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -140,20 +131,6 @@
 	status = "okay";
 };
 
-&pio {
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		pins = "PH5";
-		function = "gpio_in";
-		bias-pull-down;
-	};
-};
-
 &reg_usb0_vbus {
 	status = "okay";
 };
@@ -164,7 +141,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -174,10 +151,8 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-cubieboard.dts
index 404ce7694899..0645d6064235 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-cubieboard.dts
@@ -59,17 +59,28 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_cubieboard>;
 
-		blue {
+		led-0 {
 			label = "cubieboard:blue:usr";
 			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */
 		};
 
-		green {
+		led-1 {
 			label = "cubieboard:green:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */
 			linux,default-trigger = "heartbeat";
@@ -90,6 +101,10 @@
 	cpu-supply = <&reg_dcdc2>;
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -99,9 +114,7 @@
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_a>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	status = "okay";
 };
 
@@ -109,9 +122,17 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -121,14 +142,12 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pins>;
 	status = "okay";
 };
 
@@ -141,12 +160,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -163,17 +179,11 @@
 };
 
 &pio {
-	led_pins_cubieboard: led_pins@0 {
+	led_pins_cubieboard: led-pins {
 		pins = "PH20", "PH21";
 		function = "gpio_out";
 		drive-strength = <20>;
 	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
 };
 
 &reg_ahci_5v {
@@ -221,14 +231,14 @@
 
 &spi0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins_a>,
-		    <&spi0_cs0_pins_a>;
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -238,9 +248,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-dserve-dsrv9703c.dts
index e0777ae808c7..63e77c05bfda 100644
--- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-dserve-dsrv9703c.dts
@@ -58,12 +58,11 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&bl_en_pin_dsrv9703c>;
 		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
 		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_vcc3v3>;
 	};
 
 	chosen {
@@ -77,10 +76,8 @@
 		max-microvolt = <3000000>;
 	};
 
-	reg_motor: reg_motor {
+	reg_motor: reg-motor {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&motor_pins>;
 		regulator-name = "vcc-motor";
 		regulator-min-microvolt = <3000000>;
 		regulator-max-microvolt = <3000000>;
@@ -90,8 +87,6 @@
 };
 
 &codec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&codec_pa_pin>;
 	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
 	status = "okay";
 };
@@ -105,8 +100,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -118,15 +111,11 @@
 #include "axp209.dtsi"
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	/* pull-ups and devices require AXP209 LDO3 */
 	status = "failed";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 
 	ft5406ee8: touchscreen@38 {
@@ -134,8 +123,6 @@
 		reg = <0x38>;
 		interrupt-parent = <&pio>;
 		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&touchscreen_pins>;
 		reset-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
 		touchscreen-size-x = <1024>;
 		touchscreen-size-y = <768>;
@@ -146,14 +133,14 @@
 	vref-supply = <&reg_ldo2>;
 	status = "okay";
 
-	button@400 {
+	button-400 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
 		voltage = <400000>;
 	};
 
-	button@800 {
+	button-800 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
@@ -162,12 +149,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -175,43 +159,9 @@
 	status = "okay";
 };
 
-&pio {
-	bl_en_pin_dsrv9703c: bl_en_pin@0 {
-		pins = "PH7";
-		function = "gpio_out";
-	};
-
-	codec_pa_pin: codec_pa_pin@0 {
-		pins = "PH15";
-		function = "gpio_out";
-	};
-
-	motor_pins: motor_pins@0 {
-		pins = "PB3";
-		function = "gpio_out";
-	};
-
-	touchscreen_pins: touchscreen_pins@0 {
-		pins = "PB13";
-		function = "gpio_out";
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		pins = "PH5";
-		function = "gpio_in";
-		bias-pull-down;
-	};
-};
-
 &pwm {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins_a>;
+	pinctrl-0 = <&pwm0_pin>;
 	status = "okay";
 };
 
@@ -250,7 +200,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -260,10 +210,8 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-gemei-g9.dts
index d8bfd7b74916..ea7a59dcf8f9 100644
--- a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-gemei-g9.dts
@@ -72,8 +72,6 @@
  */
 &codec {
 	/* PH15 controls power to external amplifier (ft2012q) */
-	pinctrl-names = "default";
-	pinctrl-0 = <&codec_pa_pin>;
 	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
@@ -91,8 +89,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -104,8 +100,6 @@
 #include "axp209.dtsi"
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
 	/* Accelerometer */
@@ -122,21 +116,21 @@
 
 	status = "okay";
 
-	button@158 {
+	button-158 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
 		voltage = <158730>;
 	};
 
-	button@349 {
+	button-349 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <349206>;
 	};
 
-	button@1142 {
+	button-1142 {
 		label = "Esc";
 		linux,code = <KEY_ESC>;
 		channel = <0>;
@@ -145,22 +139,12 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH01 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */
 	status = "okay";
 };
 
-&pio {
-	codec_pa_pin: codec_pa_pin@0 {
-		pins = "PH15";
-		function = "gpio_out";
-	};
-};
-
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -197,7 +181,7 @@
 
 &uart0  {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-hackberry.dts
index 856cfc9128e6..47dea0922501 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-hackberry.dts
@@ -80,9 +80,7 @@
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_a>;
-	phy = <&phy0>;
+	phy-handle = <&phy0>;
 	status = "okay";
 };
 
@@ -92,7 +90,7 @@
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pins>;
 	status = "okay";
 };
 
@@ -106,12 +104,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -123,27 +118,11 @@
 	status = "okay";
 };
 
-&pio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hackberry_hogs>;
-
-	hackberry_hogs: hogs@0 {
-		pins = "PH19";
-		function = "gpio_out";
-	};
-
-	usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
-		pins = "PH12";
-		function = "gpio_out";
-	};
-};
-
 &reg_usb1_vbus {
 	status = "okay";
 };
 
 &reg_usb2_vbus {
-	pinctrl-0 = <&usb2_vbus_pin_hackberry>;
 	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
@@ -156,6 +135,6 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-hyundai-a7hd.dts
index 6506595268b2..bf2044bac42f 100644
--- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-hyundai-a7hd.dts
@@ -63,8 +63,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -78,12 +76,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -91,20 +86,6 @@
 	status = "okay";
 };
 
-&pio {
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		pins = "PH5";
-		function = "gpio_in";
-		bias-pull-down;
-	};
-};
-
 &reg_usb0_vbus {
 	status = "okay";
 };
@@ -116,7 +97,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -126,10 +107,8 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-inet1.dts
index d51d8c302daf..60e432a0ef1c 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet1.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-inet1.dts
@@ -58,12 +58,11 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&bl_en_pin_inet>;
 		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
 		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_vcc3v3>;
 	};
 
 	chosen {
@@ -88,8 +87,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -101,8 +98,6 @@
 #include "axp209.dtsi"
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
 	/* Accelerometer */
@@ -115,8 +110,6 @@
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 
 	ft5x: touchscreen@38 {
@@ -124,8 +117,6 @@
 		reg = <0x38>;
 		interrupt-parent = <&pio>;
 		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&touchscreen_wake_pin>;
 		wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */
 		touchscreen-size-x = <600>;
 		touchscreen-size-y = <1024>;
@@ -137,21 +128,21 @@
 	vref-supply = <&reg_ldo2>;
 	status = "okay";
 
-	button@200 {
+	button-200 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <200000>;
 	};
 
-	button@1000 {
+	button-1000 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
 		voltage = <1000000>;
 	};
 
-	button@1200 {
+	button-1200 {
 		label = "Home";
 		linux,code = <KEY_HOMEPAGE>;
 		channel = <0>;
@@ -160,12 +151,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -177,33 +165,9 @@
 	status = "okay";
 };
 
-&pio {
-	bl_en_pin_inet: bl_en_pin@0 {
-		pins = "PH7";
-		function = "gpio_out";
-	};
-
-	touchscreen_wake_pin: touchscreen_wake_pin@0 {
-		pins = "PB13";
-		function = "gpio_out";
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		pins = "PH5";
-		function = "gpio_in";
-		bias-pull-down;
-	};
-};
-
 &pwm {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins_a>;
+	pinctrl-0 = <&pwm0_pin>;
 	status = "okay";
 };
 
@@ -246,7 +210,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -256,10 +220,8 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-inet97fv2.dts
index a8e479fe43ca..76016f2ca29d 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-inet97fv2.dts
@@ -1,7 +1,7 @@
 /*
  * Copyright 2014 Open Source Support GmbH
  *
- * David Lanzendörfer <david.lanzendoerfer@o2s.ch>
+ * David Lanzendörfer <david.lanzendoerfer@o2s.ch>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -72,8 +72,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -85,14 +83,10 @@
 #include "axp209.dtsi"
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 
 	ft5406ee8: touchscreen@38 {
@@ -109,35 +103,35 @@
 	vref-supply = <&reg_ldo2>;
 	status = "okay";
 
-	button@200 {
+	button-200 {
 		label = "Menu";
 		linux,code = <KEY_MENU>;
 		channel = <0>;
 		voltage = <200000>;
 	};
 
-	button@600 {
+	button-600 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <600000>;
 	};
 
-	button@800 {
+	button-800 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
 		voltage = <800000>;
 	};
 
-	button@1000 {
+	button-1000 {
 		label = "Home";
 		linux,code = <KEY_HOMEPAGE>;
 		channel = <0>;
 		voltage = <1000000>;
 	};
 
-	button@1200 {
+	button-1200 {
 		label = "Esc";
 		linux,code = <KEY_ESC>;
 		channel = <0>;
@@ -146,12 +140,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -159,20 +150,6 @@
 	status = "okay";
 };
 
-&pio {
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		pins = "PH5";
-		function = "gpio_in";
-		bias-pull-down;
-	};
-};
-
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -208,7 +185,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -218,10 +195,8 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-inet9f-rev03.dts
new file mode 100644
index 000000000000..62e7aa587f89
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-inet9f-rev03.dts
@@ -0,0 +1,357 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "iNet-9F Rev 03";
+	compatible = "inet-tek,inet9f-rev03", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20>;
+
+		event-left-joystick-left {
+			label = "Left Joystick Left";
+			linux,code = <ABS_X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA6 */
+		};
+
+		event-left-joystick-right {
+			label = "Left Joystick Right";
+			linux,code = <ABS_X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA5 */
+		};
+
+		event-left-joystick-up {
+			label = "Left Joystick Up";
+			linux,code = <ABS_Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA8 */
+		};
+
+		event-left-joystick-down {
+			label = "Left Joystick Down";
+			linux,code = <ABS_Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA9 */
+		};
+
+		event-right-joystick-left {
+			label = "Right Joystick Left";
+			linux,code = <ABS_Z>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA1 */
+		};
+
+		event-right-joystick-right {
+			label = "Right Joystick Right";
+			linux,code = <ABS_Z>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA0 */
+		};
+
+		event-right-joystick-up {
+			label = "Right Joystick Up";
+			linux,code = <ABS_RZ>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA3 */
+		};
+
+		event-right-joystick-down {
+			label = "Right Joystick Down";
+			linux,code = <ABS_RZ>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA4 */
+		};
+
+		event-dpad-left {
+			label = "DPad Left";
+			linux,code = <ABS_HAT0X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 7 23 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH23 */
+		};
+
+		event-dpad-right {
+			label = "DPad Right";
+			linux,code = <ABS_HAT0X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 7 24 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH24 */
+		};
+
+		event-dpad-up {
+			label = "DPad Up";
+			linux,code = <ABS_HAT0Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 7 25 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH25 */
+		};
+
+		event-dpad-down {
+			label = "DPad Down";
+			linux,code = <ABS_HAT0Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 7 26 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH26 */
+		};
+
+		event-x {
+			label = "Button X";
+			linux,code = <BTN_X>;
+			gpios = <&pio 0 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA16 */
+		};
+
+		event-y {
+			label = "Button Y";
+			linux,code = <BTN_Y>;
+			gpios = <&pio 0 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA14 */
+		};
+
+		event-a {
+			label = "Button A";
+			linux,code = <BTN_A>;
+			gpios = <&pio 0 17 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA17 */
+		};
+
+		event-b {
+			label = "Button B";
+			linux,code = <BTN_B>;
+			gpios = <&pio 0 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA15 */
+		};
+
+		event-select {
+			label = "Select Button";
+			linux,code = <BTN_SELECT>;
+			gpios = <&pio 0 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA11 */
+		};
+
+		event-start {
+			label = "Start Button";
+			linux,code = <BTN_START>;
+			gpios = <&pio 0 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA12 */
+		};
+
+		event-top-left {
+			label = "Top Left Button";
+			linux,code = <BTN_TL>;
+			gpios = <&pio 7 22 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH22 */
+		};
+
+		event-top-right {
+			label = "Top Right Button";
+			linux,code = <BTN_TR>;
+			gpios = <&pio 0 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA13 */
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	/* Accelerometer */
+	bma250@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-600 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button-800 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button-1000 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button-1200 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-itead-iteaduino-plus.dts
index 92e3e030ced3..d4e319d16aae 100644
--- a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-itead-iteaduino-plus.dts
@@ -57,8 +57,8 @@
 
 &emac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&emac_pins>;
+	phy-handle = <&phy1>;
 	status = "okay";
 };
 
@@ -67,6 +67,9 @@
 };
 
 &i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
 	axp209: pmic@34 {
 		interrupts = <0>;
 	};
@@ -74,19 +77,19 @@
 
 &i2c1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 };
 
 &i2c2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
+	pinctrl-0 = <&i2c2_pins>;
 	status = "okay";
 };
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pins>;
 	status = "okay";
 };
 
@@ -100,11 +103,10 @@
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -114,7 +116,11 @@
 
 &spi0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins_a>,
-		    <&spi0_cs0_pins_a>;
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>;
 	status = "okay";
 };
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-jesurun-q5.dts
index 92b2d4af3d21..1aeb0bd5519e 100644
--- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-jesurun-q5.dts
@@ -62,10 +62,8 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_q5>;
 
-		green {
+		led {
 			label = "q5:green:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;  /* PH20 */
 		};
@@ -74,8 +72,6 @@
 
 	reg_emac_3v3: emac-3v3 {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&emac_power_pin_q5>;
 		regulator-name = "emac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -98,9 +94,7 @@
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_a>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	status = "okay";
 };
 
@@ -109,8 +103,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -125,7 +117,7 @@
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pins>;
 	status = "okay";
 };
 
@@ -139,12 +131,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -160,18 +149,6 @@
 	status = "okay";
 };
 
-&pio {
-	emac_power_pin_q5: emac_power_pin@0 {
-		pins = "PH19";
-		function = "gpio_out";
-	};
-
-	led_pins_q5: led_pins@0 {
-		pins = "PH20";
-		function = "gpio_out";
-	};
-};
-
 &reg_usb0_vbus {
 	regulator-boot-on;
 	status = "okay";
@@ -187,7 +164,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-marsboard.dts
index 0f927da28ee1..81fdb217d339 100644
--- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-marsboard.dts
@@ -61,25 +61,23 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_marsboard>;
 
-		red1 {
+		led-0 {
 			label = "marsboard:red1:usr";
 			gpios = <&pio 1 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		red2 {
+		led-1 {
 			label = "marsboard:red2:usr";
 			gpios = <&pio 1 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		red3 {
+		led-2 {
 			label = "marsboard:red3:usr";
 			gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
 		};
 
-		red4 {
+		led-3 {
 			label = "marsboard:red4:usr";
 			gpios = <&pio 1 8 GPIO_ACTIVE_HIGH>;
 		};
@@ -107,27 +105,19 @@
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_a>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	status = "okay";
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };
 
@@ -140,12 +130,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -161,19 +148,6 @@
 	status = "okay";
 };
 
-&pio {
-	led_pins_marsboard: led_pins@0 {
-		pins = "PB5", "PB6", "PB7", "PB8";
-		function = "gpio_out";
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -184,14 +158,14 @@
 
 &spi0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins_a>,
-		    <&spi0_cs0_pins_a>;
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -201,9 +175,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-mini-xplus.dts
index a5ed9e4e22c6..f9d74e21031d 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-mini-xplus.dts
@@ -70,8 +70,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -86,22 +84,19 @@
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pins>;
 	status = "okay";
 };
 
-&ir0_rx_pins_a {
+&ir0_rx_pins {
 	/* The ir receiver is not always populated */
 	bias-pull-up;
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -132,7 +127,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-mk802.dts
index 81db6824a2c7..059fe9c5d024 100644
--- a/arch/arm/boot/dts/sun4i-a10-mk802.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-mk802.dts
@@ -56,12 +56,27 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
 };
 
 &codec {
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -70,13 +85,20 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -88,23 +110,6 @@
 	status = "okay";
 };
 
-&pio {
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		pins = "PH5";
-		function = "gpio_in";
-	};
-
-	usb2_vbus_pin_mk802: usb2_vbus_pin@0 {
-		pins = "PH12";
-		function = "gpio_out";
-	};
-};
-
 &reg_usb0_vbus {
 	status = "okay";
 };
@@ -114,14 +119,13 @@
 };
 
 &reg_usb2_vbus {
-	pinctrl-0 = <&usb2_vbus_pin_mk802>;
 	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -131,8 +135,6 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
 	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
 	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
diff --git a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-mk802ii.dts
index e74a881fd9a7..17dcdf031118 100644
--- a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-mk802ii.dts
@@ -67,8 +67,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -82,12 +80,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -105,7 +100,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts
index 462412ee903c..d425d9ee83db 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts
@@ -58,12 +58,23 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxinolime>;
 
-		green {
+		led {
 			label = "a10-olinuxino-lime:green:usr";
 			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -80,13 +91,15 @@
 	/*
 	 * The A10-Lime is known to be unstable when running at 1008 MHz
 	 */
-	operating-points = <
-		/* kHz    uV */
-		912000  1350000
-		864000  1300000
-		624000  1250000
-		>;
-	cooling-max-level = <2>;
+	operating-points =
+		/* kHz	  uV */
+		<912000	1350000>,
+		<864000	1300000>,
+		<624000	1250000>;
+};
+
+&de {
+	status = "okay";
 };
 
 &ehci0 {
@@ -98,9 +111,7 @@
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_a>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	status = "okay";
 };
 
@@ -108,9 +119,17 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -124,8 +143,6 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
 	eeprom: eeprom@50 {
@@ -144,12 +161,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -166,32 +180,14 @@
 };
 
 &pio {
-	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
-		pins = "PC3";
-		function = "gpio_out";
-	};
-
-	led_pins_olinuxinolime: led_pins@0 {
+	led_pins_olinuxinolime: led-pin {
 		pins = "PH2";
 		function = "gpio_out";
 		drive-strength = <20>;
 	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		pins = "PH5";
-		function = "gpio_in";
-		bias-pull-down;
-	};
 };
 
 &reg_ahci_5v {
-	pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
 	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
@@ -210,7 +206,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -220,11 +216,9 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio   = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
-	usb0_vbus-supply   = <&reg_usb0_vbus>;
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino.dts
index 84f55e76df0c..a332d61fd561 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino.dts
@@ -62,40 +62,34 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_pcduino>;
 
-		tx {
+		led-0 {
 			label = "pcduino:green:tx";
 			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
 		};
 
-		rx {
+		led-1 {
 			label = "pcduino:green:rx";
 			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&key_pins_pcduino>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		button@0 {
+		key-back {
 			label = "Key Back";
 			linux,code = <KEY_BACK>;
 			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
 		};
 
-		button@1 {
+		key-home {
 			label = "Key Home";
 			linux,code = <KEY_HOME>;
 			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
 		};
 
-		button@2 {
+		key-menu {
 			label = "Key Menu";
 			linux,code = <KEY_MENU>;
 			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
@@ -116,9 +110,7 @@
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_a>;
-	phy = <&phy1>;
+	phy-handle = <&phy1>;
 	status = "okay";
 };
 
@@ -127,8 +119,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -146,12 +136,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -167,24 +154,6 @@
 	status = "okay";
 };
 
-&pio {
-	led_pins_pcduino: led_pins@0 {
-		pins = "PH15", "PH16";
-		function = "gpio_out";
-	};
-
-	key_pins_pcduino: key_pins@0 {
-		pins = "PH17", "PH18", "PH19";
-		function = "gpio_in";
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 #include "axp209.dtsi"
 
 &reg_dcdc2 {
@@ -214,7 +183,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -224,9 +193,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */
 	usb2_vbus-supply = <&reg_vcc5v0>; /* USB2 VBUS is always on */
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino2.dts
index 811d00ee2ade..bc4f128965ed 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino2.dts
@@ -55,16 +55,7 @@
 	compatible = "linksprite,a10-pcduino2", "allwinner,sun4i-a10";
 };
 
-&pio {
-	usb2_vbus_pin_pcduino2: usb2_vbus_pin@0 {
-		pins = "PD2";
-		function = "gpio_out";
-	};
-};
-
 &reg_usb2_vbus {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb2_vbus_pin_pcduino2>;
 	gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-pov-protab2-ips9.dts
index c0f8c88b5a7d..c32596947647 100644
--- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-pov-protab2-ips9.dts
@@ -58,12 +58,11 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&bl_en_pin_protab>;
 		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
 		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_vcc3v3>;
 	};
 
 	chosen {
@@ -72,8 +71,6 @@
 };
 
 &codec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&codec_pa_pin>;
 	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
 	status = "okay";
 };
@@ -87,8 +84,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -100,20 +95,14 @@
 #include "axp209.dtsi"
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	/* pull-ups and devices require AXP209 LDO3 */
 	status = "failed";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 
-	pixcir_ts@5c {
-		pinctrl-names = "default";
-		pinctrl-0 = <&touchscreen_pins>;
+	touchscreen@5c {
 		compatible = "pixcir,pixcir_tangoc";
 		reg = <0x5c>;
 		interrupt-parent = <&pio>;
@@ -132,14 +121,14 @@
 	vref-supply = <&reg_ldo2>;
 	status = "okay";
 
-	button@400 {
+	button-400 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <400000>;
 	};
 
-	button@800 {
+	button-800 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
@@ -148,12 +137,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -161,38 +147,9 @@
 	status = "okay";
 };
 
-&pio {
-	bl_en_pin_protab: bl_en_pin@0 {
-		pins = "PH7";
-		function = "gpio_out";
-	};
-
-	codec_pa_pin: codec_pa_pin@0 {
-		pins = "PH15";
-		function = "gpio_out";
-	};
-
-	touchscreen_pins: touchscreen_pins@0 {
-		pins = "PA5", "PB13";
-		function = "gpio_out";
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		pins = "PH5";
-		function = "gpio_in";
-		bias-pull-down;
-	};
-};
-
 &pwm {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins_a>;
+	pinctrl-0 = <&pwm0_pin>;
 	status = "okay";
 };
 
@@ -231,7 +188,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -241,10 +198,8 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-topwise-a721.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-topwise-a721.dts
new file mode 100644
index 000000000000..3628f12d2521
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-topwise-a721.dts
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 Pascal Roeleven <dev@pascalroeleven.nl>
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Topwise A721";
+	compatible = "topwise,a721", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 100000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_vbat>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		brightness-levels = <0 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	panel {
+		compatible = "starry,kr070pe2t";
+		backlight = <&backlight>;
+		power-supply = <&reg_lcd_power>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&tcon0_out_panel>;
+			};
+		};
+	};
+
+	reg_lcd_power: reg-lcd-power {
+		compatible = "regulator-fixed";
+		regulator-name = "reg-lcd-power";
+		gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+		enable-active-high;
+	};
+
+	reg_vbat: reg-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	accelerometer@4c {
+		compatible = "fsl,mma7660";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-571 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <571428>;
+	};
+
+	button-761 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <761904>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-ph-supply = <&reg_vcc3v3>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_panel: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&panel_input>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10.dtsi b/arch/arm/boot/dts/allwinner/sun4i-a10.dtsi
new file mode 100644
index 000000000000..51a6464aab9a
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10.dtsi
@@ -0,0 +1,1271 @@
+/*
+ * Copyright 2012 Stefan Roese
+ * Stefan Roese <sr@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/clock/sun4i-a10-ccu.h>
+#include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-lcd0-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+
+		framebuffer-fe0-lcd0-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
+				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+
+		framebuffer-fe0-lcd0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
+				 <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+
+		framebuffer-fe0-lcd0-tve0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
+			clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
+				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
+				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>,
+				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points =
+				/* kHz	  uV */
+				<1008000 1400000>,
+				<912000	1350000>,
+				<864000	1300000>,
+				<624000	1250000>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu-alert0 {
+					/* milliCelsius */
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun4i-a10-display-engine";
+		allwinner,pipelines = <&fe0>, <&fe1>;
+		status = "disabled";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupts = <3>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+		default-pool {
+			compatible = "shared-dma-pool";
+			size = <0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		system-control@1c00000 {
+			compatible = "allwinner,sun4i-a10-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a: sram@0 {
+				compatible = "mmio-sram";
+				reg = <0x00000000 0xc000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00000000 0xc000>;
+
+				emac_sram: sram-section@8000 {
+					compatible = "allwinner,sun4i-a10-sram-a3-a4";
+					reg = <0x8000 0x4000>;
+					status = "disabled";
+				};
+			};
+
+			sram_d: sram@10000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0 {
+					compatible = "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0xd0000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0xd0000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <27>;
+			clocks = <&ccu CLK_AHB_DMA>;
+			#dma-cells = <2>;
+		};
+
+		nfc: nand-controller@1c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <37>;
+			clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 3>;
+			dma-names = "rxtx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins>, <&spi1_cs0_pin>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@1c0b000 {
+			compatible = "allwinner,sun4i-a10-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <55>;
+			clocks = <&ccu CLK_AHB_EMAC>;
+			allwinner,sram = <&emac_sram 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins>;
+			status = "disabled";
+		};
+
+		mdio: mdio@1c0b080 {
+			compatible = "allwinner,sun4i-a10-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun4i-a10-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <44>;
+			resets = <&ccu RST_TCON0>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB_LCD0>,
+				 <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_TCON0_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon0-pixel-clock";
+			#clock-cells = <0>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 14>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon0>;
+					};
+
+					tcon0_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		tcon1: lcd-controller@1c0d000 {
+			compatible = "allwinner,sun4i-a10-tcon";
+			reg = <0x01c0d000 0x1000>;
+			interrupts = <45>;
+			resets = <&ccu RST_TCON1>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB_LCD1>,
+				 <&ccu CLK_TCON1_CH0>,
+				 <&ccu CLK_TCON1_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon1-pixel-clock";
+			#clock-cells = <0>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 15>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon1_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon1>;
+					};
+
+					tcon1_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon1_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon1>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun4i-a10-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_VE>;
+			interrupts = <53>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			interrupts = <32>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			interrupts = <33>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			interrupts = <34>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC3>, <&ccu CLK_MMC3>;
+			clock-names = "ahb", "mmc";
+			interrupts = <35>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,sun4i-a10-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_AHB_OTG>;
+			interrupts = <38>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun4i-a10-usb-phy";
+			reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
+			reg-names = "phy_ctrl", "pmu1", "pmu2";
+			clocks = <&ccu CLK_USB_PHY>;
+			clock-names = "usb_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>;
+			reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@1c14000 {
+			compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <39>;
+			clocks = <&ccu CLK_AHB_EHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c14400 {
+			compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <64>;
+			clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		crypto: crypto-engine@1c15000 {
+			compatible = "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <86>;
+			clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
+			clock-names = "ahb", "mod";
+		};
+
+		hdmi: hdmi@1c16000 {
+			compatible = "allwinner,sun4i-a10-hdmi";
+			reg = <0x01c16000 0x1000>;
+			interrupts = <58>;
+			clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_PLL_VIDEO0_2X>,
+				 <&ccu CLK_PLL_VIDEO1_2X>;
+			clock-names = "ahb", "mod", "pll-0", "pll-1";
+			dmas = <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_DEDICATED 24>;
+			dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+
+					hdmi_in_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		spi2: spi@1c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ahci: sata@1c18000 {
+			compatible = "allwinner,sun4i-a10-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <56>;
+			clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1c000 {
+			compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <40>;
+			clocks = <&ccu CLK_AHB_EHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c1c400 {
+			compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <65>;
+			clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		csi1: csi@1c1d000 {
+			compatible = "allwinner,sun4i-a10-csi1";
+			reg = <0x01c1d000 0x1000>;
+			interrupts = <43>;
+			clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>;
+			clock-names = "bus", "ram";
+			resets = <&ccu RST_CSI1>;
+			status = "disabled";
+		};
+
+		spi3: spi@1c1f000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c1f000 0x1000>;
+			interrupts = <50>;
+			clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 31>,
+			       <&dma SUN4I_DMA_DEDICATED 30>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun4i-a10-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		intc: interrupt-controller@1c20400 {
+			compatible = "allwinner,sun4i-a10-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun4i-a10-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <28>;
+			clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			can0_ph_pins: can0-ph-pins {
+				pins = "PH20", "PH21";
+				function = "can";
+			};
+
+			/omit-if-no-ref/
+			csi1_8bits_pg_pins: csi1-8bits-pg-pins {
+				pins = "PG0", "PG2", "PG3", "PG4", "PG5",
+				       "PG6", "PG7", "PG8", "PG9", "PG10",
+				       "PG11";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_24bits_ph_pins: csi1-24bits-ph-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH8", "PH9",
+				       "PH10", "PH11", "PH12", "PH13", "PH14",
+				       "PH15", "PH16", "PH17", "PH18", "PH19",
+				       "PH20", "PH21", "PH22", "PH23", "PH24",
+				       "PH25", "PH26", "PH27";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_clk_pg_pin: csi1-clk-pg-pin {
+				pins = "PG1";
+				function = "csi1";
+			};
+
+			emac_pins: emac0-pins {
+				pins = "PA0", "PA1", "PA2",
+				       "PA3", "PA4", "PA5", "PA6",
+				       "PA7", "PA8", "PA9", "PA10",
+				       "PA11", "PA12", "PA13", "PA14",
+				       "PA15", "PA16";
+				function = "emac";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PB0", "PB1";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PB18", "PB19";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PB20", "PB21";
+				function = "i2c2";
+			};
+
+			ir0_rx_pins: ir0-rx-pin {
+				pins = "PB4";
+				function = "ir0";
+			};
+
+			ir0_tx_pins: ir0-tx-pin {
+				pins = "PB3";
+				function = "ir0";
+			};
+
+			ir1_rx_pins: ir1-rx-pin {
+				pins = "PB23";
+				function = "ir1";
+			};
+
+			ir1_tx_pins: ir1-tx-pin {
+				pins = "PB22";
+				function = "ir1";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			ps2_ch0_pins: ps2-ch0-pins {
+				pins = "PI20", "PI21";
+				function = "ps2";
+			};
+
+			ps2_ch1_ph_pins: ps2-ch1-ph-pins {
+				pins = "PH12", "PH13";
+				function = "ps2";
+			};
+
+			pwm0_pin: pwm0-pin {
+				pins = "PB2";
+				function = "pwm";
+			};
+
+			pwm1_pin: pwm1-pin {
+				pins = "PI3";
+				function = "pwm";
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PB13";
+				function = "spdif";
+				bias-pull-up;
+			};
+
+			spi0_pi_pins: spi0-pi-pins {
+				pins = "PI11", "PI12", "PI13";
+				function = "spi0";
+			};
+
+			spi0_cs0_pi_pin: spi0-cs0-pi-pin {
+				pins = "PI10";
+				function = "spi0";
+			};
+
+			spi1_pins: spi1-pins {
+				pins = "PI17", "PI18", "PI19";
+				function = "spi1";
+			};
+
+			spi1_cs0_pin: spi1-cs0-pin {
+				pins = "PI16";
+				function = "spi1";
+			};
+
+			spi2_pb_pins: spi2-pb-pins {
+				pins = "PB15", "PB16", "PB17";
+				function = "spi2";
+			};
+
+			spi2_pc_pins: spi2-pc-pins {
+				pins = "PC20", "PC21", "PC22";
+				function = "spi2";
+			};
+
+			spi2_cs0_pb_pin: spi2-cs0-pb-pin {
+				pins = "PB14";
+				function = "spi2";
+			};
+
+			spi2_cs0_pc_pins: spi2-cs0-pc-pin {
+				pins = "PC19";
+				function = "spi2";
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB22", "PB23";
+				function = "uart0";
+			};
+
+			uart0_pf_pins: uart0-pf-pins {
+				pins = "PF2", "PF4";
+				function = "uart0";
+			};
+
+			uart1_pins: uart1-pins {
+				pins = "PA10", "PA11";
+				function = "uart1";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <22>,
+				     <23>,
+				     <24>,
+				     <25>,
+				     <67>,
+				     <68>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@1c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+			interrupts = <24>;
+			clocks = <&osc24M>;
+		};
+
+		rtc: rtc@1c20d00 {
+			compatible = "allwinner,sun4i-a10-rtc";
+			reg = <0x01c20d00 0x20>;
+			interrupts = <24>;
+		};
+
+		pwm: pwm@1c20e00 {
+			compatible = "allwinner,sun4i-a10-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <13>;
+			clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma SUN4I_DMA_NORMAL 2>,
+			       <&dma SUN4I_DMA_NORMAL 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		ir0: ir@1c21800 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>;
+			clock-names = "apb", "ir";
+			interrupts = <5>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		ir1: ir@1c21c00 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>;
+			clock-names = "apb", "ir";
+			interrupts = <6>;
+			reg = <0x01c21c00 0x40>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <16>;
+			clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 3>,
+			       <&dma SUN4I_DMA_NORMAL 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <31>;
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <30>;
+			clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		sid: eeprom@1c23800 {
+			compatible = "allwinner,sun4i-a10-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
+		rtp: rtp@1c25000 {
+			compatible = "allwinner,sun4i-a10-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <29>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <17>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@1c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <18>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@1c29800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29800 0x400>;
+			interrupts = <19>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART6>;
+			status = "disabled";
+		};
+
+		uart7: serial@1c29c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29c00 0x400>;
+			interrupts = <20>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART7>;
+			status = "disabled";
+		};
+
+		ps20: ps2@1c2a000 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a000 0x400>;
+			interrupts = <62>;
+			clocks = <&ccu CLK_APB1_PS20>;
+			status = "disabled";
+		};
+
+		ps21: ps2@1c2a400 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a400 0x400>;
+			interrupts = <63>;
+			clocks = <&ccu CLK_APB1_PS21>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <7>;
+			clocks = <&ccu CLK_APB1_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <8>;
+			clocks = <&ccu CLK_APB1_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <9>;
+			clocks = <&ccu CLK_APB1_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		can0: can@1c2bc00 {
+			compatible = "allwinner,sun4i-a10-can";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <26>;
+			clocks = <&ccu CLK_APB1_CAN>;
+			status = "disabled";
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun4i-a10-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <69>,
+				     <70>,
+				     <71>,
+				     <72>,
+				     <73>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pmu";
+			clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_GPU>;
+
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <384000000>;
+		};
+
+		fe0: display-frontend@1e00000 {
+			compatible = "allwinner,sun4i-a10-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <47>;
+			clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>,
+				 <&ccu CLK_DRAM_DE_FE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+
+					fe0_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe0>;
+					};
+				};
+			};
+		};
+
+		fe1: display-frontend@1e20000 {
+			compatible = "allwinner,sun4i-a10-display-frontend";
+			reg = <0x01e20000 0x20000>;
+			interrupts = <48>;
+			clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>,
+				 <&ccu CLK_DRAM_DE_FE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe1_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe1>;
+					};
+
+					fe1_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe1>;
+					};
+				};
+			};
+		};
+
+		be1: display-backend@1e40000 {
+			compatible = "allwinner,sun4i-a10-display-backend";
+			reg = <0x01e40000 0x10000>;
+			interrupts = <48>;
+			clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>,
+				 <&ccu CLK_DRAM_DE_BE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be1_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be1>;
+					};
+
+					be1_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be1>;
+					};
+				};
+
+				be1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be1_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be1>;
+					};
+
+					be1_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_be1>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			compatible = "allwinner,sun4i-a10-display-backend";
+			reg = <0x01e60000 0x10000>;
+			interrupts = <47>;
+			clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_DRAM_DE_BE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+
+					be0_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be0>;
+					};
+
+					be0_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_be0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t003.dts
index d2dee8d434bf..04b0e6d28769 100644
--- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t003.dts
@@ -62,7 +62,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_t003>;
 
-		red {
+		led {
 			label = "t003-tv-dongle:red:usr";
 			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
 			default-state = "on";
@@ -75,8 +75,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp152: pmic@30 {
@@ -89,12 +87,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t003>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
-	cd-inverted;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
 	status = "okay";
 };
 
@@ -107,13 +102,7 @@
 };
 
 &pio {
-	mmc0_cd_pin_t003: mmc0_cd_pin@0 {
-		pins = "PG1";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	led_pins_t003: led_pins@0 {
+	led_pins_t003: led-pin {
 		pins = "PB2";
 		function = "gpio_out";
 		drive-strength = <20>;
@@ -132,7 +121,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t004.dts
index 16f839df4227..667bc2dc1ea9 100644
--- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t004.dts
@@ -62,7 +62,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_t004>;
 
-		red {
+		led {
 			label = "t004-tv-dongle:red:usr";
 			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
 			default-state = "on";
@@ -71,8 +71,6 @@
 
 	reg_vmmc1: vmmc1 {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&mmc1_vcc_en_pin_t004>;
 		regulator-name = "vmmc1";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -86,8 +84,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp152: pmic@30 {
@@ -100,18 +96,13 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
-	cd-inverted;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
 	status = "okay";
 };
 
 &mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>;
 	vmmc-supply = <&reg_vmmc1>;
 	bus-width = <4>;
 	non-removable;
@@ -128,24 +119,7 @@
 };
 
 &pio {
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PG12";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	mmc0_cd_pin_t004: mmc0_cd_pin@0 {
-		pins = "PG1";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 {
-		pins = "PB18";
-		function = "gpio_out";
-	};
-
-	led_pins_t004: led_pins@0 {
+	led_pins_t004: led-pin {
 		pins = "PB2";
 		function = "gpio_out";
 		drive-strength = <20>;
@@ -159,7 +133,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -169,9 +143,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-mk802.dts
index 020aa9d6c31d..d0219404c231 100644
--- a/arch/arm/boot/dts/sun5i-a10s-mk802.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-mk802.dts
@@ -59,10 +59,8 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_mk802>;
 
-		red {
+		led {
 			label = "mk802:red:usr";
 			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
 		};
@@ -74,8 +72,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp152: pmic@30 {
@@ -88,18 +84,13 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
-	cd-inverted;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
 	status = "okay";
 };
 
 &mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	non-removable;
@@ -114,33 +105,14 @@
 	status = "okay";
 };
 
-&pio {
-	led_pins_mk802: led_pins@0 {
-		pins = "PB2";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin_mk802: mmc0_cd_pin@0 {
-		pins = "PG1";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb1_vbus_pin_mk802: usb1_vbus_pin@0 {
-		pins = "PB10";
-		function = "gpio_out";
-	};
-};
-
 &reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_mk802>;
 	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-olinuxino-micro.dts
index da95118af4dc..5832bb31fc51 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-olinuxino-micro.dts
@@ -79,7 +79,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxino>;
 
-		green {
+		led {
 			label = "a10s-olinuxino-micro:green:usr";
 			gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -97,8 +97,8 @@
 
 &emac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_b>;
-	phy = <&phy1>;
+	pinctrl-0 = <&emac_pa_pins>;
+	phy-handle = <&phy1>;
 	status = "okay";
 };
 
@@ -117,8 +117,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp152: pmic@30 {
@@ -130,11 +128,9 @@
 #include "axp152.dtsi"
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c16";
 		pagesize = <16>;
 		reg = <0x50>;
@@ -143,8 +139,6 @@
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };
 
@@ -152,35 +146,35 @@
 	vref-supply = <&reg_vcc3v0>;
 	status = "okay";
 
-	button@191 {
+	button-191 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <191274>;
 	};
 
-	button@392 {
+	button-392 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
 		voltage = <392644>;
 	};
 
-	button@601 {
+	button-601 {
 		label = "Menu";
 		linux,code = <KEY_MENU>;
 		channel = <0>;
 		voltage = <601151>;
 	};
 
-	button@795 {
+	button-795 {
 		label = "Enter";
 		linux,code = <KEY_ENTER>;
 		channel = <0>;
 		voltage = <795090>;
 	};
 
-	button@987 {
+	button-987 {
 		label = "Home";
 		linux,code = <KEY_HOMEPAGE>;
 		channel = <0>;
@@ -197,22 +191,16 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
-	cd-inverted;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
 	status = "okay";
 };
 
 &mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
-	cd-inverted;
+	cd-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>; /* PG13 */
 	status = "okay";
 };
 
@@ -225,34 +213,11 @@
 };
 
 &pio {
-	mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
-		pins = "PG1";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
-		pins = "PG13";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	led_pins_olinuxino: led_pins@0 {
+	led_pins_olinuxino: led-pin {
 		pins = "PE3";
 		function = "gpio_out";
 		drive-strength = <20>;
 	};
-
-	usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
-		pins = "PB10";
-		function = "gpio_out";
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PG12";
-		function = "gpio_in";
-		bias-pull-up;
-	};
 };
 
 &reg_usb0_vbus {
@@ -261,15 +226,14 @@
 };
 
 &reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
 	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &spi2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins_b>,
-		    <&spi2_cs0_pins_b>;
+	pinctrl-0 = <&spi2_pb_pins>,
+		    <&spi2_cs0_pb_pin>;
 	status = "okay";
 };
 
@@ -279,19 +243,19 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins_b>;
+	pinctrl-0 = <&uart2_pc_pins>;
 	status = "okay";
 };
 
 &uart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins_a>;
+	pinctrl-0 = <&uart3_pg_pins>;
 	status = "okay";
 };
 
@@ -301,9 +265,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-r7-tv-dongle.dts
index 262b3669f04d..964360f0610a 100644
--- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-r7-tv-dongle.dts
@@ -63,7 +63,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_r7>;
 
-		green {
+		led {
 			label = "r7-tv-dongle:green:usr";
 			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -76,18 +76,13 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
-	cd-inverted;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
 	status = "okay";
 };
 
 &mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	non-removable;
@@ -99,33 +94,21 @@
 };
 
 &pio {
-	mmc0_cd_pin_r7: mmc0_cd_pin@0 {
-		pins = "PG1";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	led_pins_r7: led_pins@0 {
+	led_pins_r7: led-pin {
 		pins = "PB2";
 		function = "gpio_out";
 		drive-strength = <20>;
 	};
-
-	usb1_vbus_pin_r7: usb1_vbus_pin@0 {
-		pins = "PG13";
-		function = "gpio_out";
-	};
 };
 
 &reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_r7>;
 	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-wobo-i5.dts
index 5482be174e12..ef8baa992687 100644
--- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-wobo-i5.dts
@@ -61,10 +61,8 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_wobo_i5>;
 
-		blue {
+		led {
 			label = "a10s-wobo-i5:blue:usr";
 			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -73,8 +71,6 @@
 
 	reg_emac_3v3: emac-3v3 {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&emac_power_pin_wobo>;
 		regulator-name = "emac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -94,8 +90,8 @@
 
 &emac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&emac_pd_pins>;
+	phy-handle = <&phy1>;
 	status = "okay";
 };
 
@@ -104,8 +100,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -126,12 +120,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_wobo_i5>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
-	cd-inverted;
+	cd-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 */
 	status = "okay";
 };
 
@@ -143,24 +134,6 @@
 	status = "okay";
 };
 
-&pio {
-	led_pins_wobo_i5: led_pins@0 {
-		pins = "PB2";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin_wobo_i5: mmc0_cd_pin@0 {
-		pins = "PB3";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	emac_power_pin_wobo: emac_power_pin@0 {
-		pins = "PA02";
-		function = "gpio_out";
-	};
-};
-
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -207,7 +180,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/allwinner/sun5i-a10s.dtsi
index 18f25c5e75ae..09c486b608b2 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s.dtsi
@@ -42,15 +42,11 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
-
 #include "sun5i.dtsi"
 
 #include <dt-bindings/dma/sun4i-a10.h>
 
 / {
-	interrupt-parent = <&intc>;
-
 	aliases {
 		ethernet0 = &emac;
 	};
@@ -60,7 +56,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		framebuffer@2 {
+		framebuffer-lcd0-hdmi {
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
@@ -76,14 +72,14 @@
 		allwinner,pipelines = <&fe0>;
 	};
 
-	soc@01c00000 {
-		hdmi: hdmi@01c16000 {
+	soc {
+		hdmi: hdmi@1c16000 {
 			compatible = "allwinner,sun5i-a10s-hdmi";
 			reg = <0x01c16000 0x1000>;
 			interrupts = <58>;
 			clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>,
-				 <&ccu 9>,
-				 <&ccu 16>;
+				 <&ccu CLK_PLL_VIDEO0_2X>,
+				 <&ccu CLK_PLL_VIDEO1_2X>;
 			clock-names = "ahb", "mod", "pll-0", "pll-1";
 			dmas = <&dma SUN4I_DMA_NORMAL 16>,
 			       <&dma SUN4I_DMA_NORMAL 16>,
@@ -104,14 +100,12 @@
 				};
 
 				hdmi_out: port@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
 					reg = <1>;
 				};
 			};
 		};
 
-		pwm: pwm@01c20e00 {
+		pwm: pwm@1c20e00 {
 			compatible = "allwinner,sun5i-a10s-pwm";
 			reg = <0x01c20e00 0xc>;
 			clocks = <&ccu CLK_HOSC>;
@@ -125,20 +119,25 @@
 	compatible = "allwinner,sun5i-a10s-ccu";
 };
 
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+
 &pio {
 	compatible = "allwinner,sun5i-a10s-pinctrl";
 
-	uart0_pins_a: uart0@0 {
+	uart0_pb_pins: uart0-pb-pins {
 		pins = "PB19", "PB20";
 		function = "uart0";
 	};
 
-	uart2_pins_b: uart2@1 {
+	uart2_pc_pins: uart2-pc-pins {
 		pins = "PC18", "PC19";
 		function = "uart2";
 	};
 
-	emac_pins_b: emac0@1 {
+	emac_pa_pins: emac-pa-pins {
 		pins = "PA0", "PA1", "PA2",
 				"PA3", "PA4", "PA5", "PA6",
 				"PA7", "PA8", "PA9", "PA10",
@@ -147,27 +146,24 @@
 		function = "emac";
 	};
 
-	mmc1_pins_a: mmc1@0 {
+	mmc1_pins: mmc1-pins {
 		pins = "PG3", "PG4", "PG5",
 				 "PG6", "PG7", "PG8";
 		function = "mmc1";
 		drive-strength = <30>;
 	};
 
-	spi2_pins_b: spi2@1 {
+	spi2_pb_pins: spi2-pb-pins {
 		pins = "PB12", "PB13", "PB14";
 		function = "spi2";
 	};
 
-	spi2_cs0_pins_b: spi2_cs0@1 {
+	spi2_cs0_pb_pin: spi2-cs0-pb-pin {
 		pins = "PB11";
 		function = "spi2";
 	};
 };
 
-&sram_a {
-};
-
 &tcon0_out {
 	tcon0_out_hdmi: endpoint@2 {
 		reg = <2>;
diff --git a/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-difrnce-dit4350.dts
index 894c4c4f9a1f..894c4c4f9a1f 100644
--- a/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-difrnce-dit4350.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-d709.dts
index 3dbb0d7c2f8c..d059388d7252 100644
--- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-d709.dts
@@ -61,6 +61,7 @@
 		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
+		power-supply = <&reg_vcc3v3>;
 		/* TODO: backlight uses axp gpio1 as enable pin */
 	};
 
@@ -78,8 +79,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -91,8 +90,6 @@
 #include "axp209.dtsi"
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
 	pcf8563: rtc@51 {
@@ -105,14 +102,14 @@
 	vref-supply = <&reg_ldo2>;
 	status = "okay";
 
-	button@200 {
+	button-200 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <200000>;
 	};
 
-	button@400 {
+	button-400 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
@@ -121,12 +118,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
-	cd-inverted;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
 	status = "okay";
 };
 
@@ -134,29 +128,9 @@
 	status = "okay";
 };
 
-&pio {
-	mmc0_cd_pin_d709: mmc0_cd_pin@0 {
-		pins = "PG0";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		pins = "PG1";
-		function = "gpio_in";
-		bias-pull-down;
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PG2";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &pwm {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-0 = <&pwm0_pin>;
 	status = "okay";
 };
 
@@ -198,7 +172,7 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>;
+	pinctrl-0 = <&uart1_pg_pins>;
 	status = "okay";
 };
 
@@ -208,10 +182,8 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_ldo3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-m712.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-m712.dts
index b1e2afd9de52..b1e2afd9de52 100644
--- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-m712.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-m712.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-hsg-h702.dts
index 584fa579ded2..9b9f2a574851 100644
--- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-hsg-h702.dts
@@ -69,8 +69,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -80,8 +78,6 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
 	pcf8563: rtc@51 {
@@ -91,8 +87,6 @@
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };
 
@@ -100,14 +94,14 @@
 	vref-supply = <&reg_ldo2>;
 	status = "okay";
 
-	button@200 {
+	button-200 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <200000>;
 	};
 
-	button@400 {
+	button-400 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
@@ -116,12 +110,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
-	cd-inverted;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
 	status = "okay";
 };
 
@@ -133,25 +124,6 @@
 	status = "okay";
 };
 
-&pio {
-	mmc0_cd_pin_h702: mmc0_cd_pin@0 {
-		pins = "PG0";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PG2";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		pins = "PG1";
-		function = "gpio_in";
-	};
-};
-
 #include "axp209.dtsi"
 
 &reg_dcdc2 {
@@ -192,7 +164,7 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>;
+	pinctrl-0 = <&uart1_pg_pins>;
 	status = "okay";
 };
 
@@ -202,9 +174,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
 	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_ldo3>;
diff --git a/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-inet-98v-rev2.dts
index 439ae3b537df..439ae3b537df 100644
--- a/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-inet-98v-rev2.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-licheepi-one.dts
index bc883893f4a4..3a6c4bd0a44f 100644
--- a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-licheepi-one.dts
@@ -66,19 +66,19 @@
 	leds {
 		compatible = "gpio-leds";
 
-		red {
-			label ="licheepi:red:usr";
+		led-0 {
+			label = "licheepi:red:usr";
 			gpios = <&pio 2 5 GPIO_ACTIVE_LOW>;
 		};
 
-		green {
-			label ="licheepi:green:usr";
+		led-1 {
+			label = "licheepi:green:usr";
 			gpios = <&pio 2 19 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		blue {
-			label ="licheepi:blue:usr";
+		led-2 {
+			label = "licheepi:blue:usr";
 			gpios = <&pio 2 4 GPIO_ACTIVE_LOW>;
 		};
 
@@ -94,8 +94,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -109,14 +107,10 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "disabled";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "disabled";
 };
 
@@ -124,7 +118,7 @@
 	vref-supply = <&reg_ldo2>;
 	status = "okay";
 
-	button@984 {
+	button-984 {
 		label = "Home";
 		linux,code = <KEY_HOMEPAGE>;
 		channel = <0>;
@@ -133,8 +127,6 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	broken-cd;
@@ -143,7 +135,7 @@
 
 &mmc2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_4bit_pins_a>;
+	pinctrl-0 = <&mmc2_4bit_pc_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	broken-cd;
@@ -204,7 +196,7 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>;
+	pinctrl-0 = <&uart1_pg_pins>;
 	status = "okay";
 };
 
@@ -214,9 +206,8 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_vcc5v0>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino-micro.dts
new file mode 100644
index 000000000000..bfe1075e62cc
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino-micro.dts
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com>
+ * Copyright 2013 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Olimex A13-Olinuxino Micro";
+	compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinom>;
+
+		led {
+			label = "a13-olinuxino-micro:green:power";
+			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_olinuxinom: led-pin {
+		pins = "PG9";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino.dts
index 38072c7e10e2..fadeae3cd8bb 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino.dts
@@ -66,7 +66,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxino>;
 
-		power {
+		led {
 			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
@@ -74,8 +74,6 @@
 
 	bridge {
 		compatible = "dumb-vga-dac";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		ports {
 			#address-cells = <1>;
@@ -114,13 +112,15 @@
 	status = "okay";
 };
 
+&codec {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -134,14 +134,10 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };
 
@@ -149,35 +145,35 @@
 	vref-supply = <&reg_vcc3v0>;
 	status = "okay";
 
-	button@191 {
+	button-191 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <191274>;
 	};
 
-	button@392 {
+	button-392 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
 		voltage = <392644>;
 	};
 
-	button@601 {
+	button-601 {
 		label = "Menu";
 		linux,code = <KEY_MENU>;
 		channel = <0>;
 		voltage = <601151>;
 	};
 
-	button@795 {
+	button-795 {
 		label = "Enter";
 		linux,code = <KEY_ENTER>;
 		channel = <0>;
 		voltage = <795090>;
 	};
 
-	button@987 {
+	button-987 {
 		label = "Home";
 		linux,code = <KEY_HOMEPAGE>;
 		channel = <0>;
@@ -186,12 +182,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
-	cd-inverted;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
 	status = "okay";
 };
 
@@ -204,34 +197,11 @@
 };
 
 &pio {
-	mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
-		pins = "PG0";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	led_pins_olinuxino: led_pins@0 {
+	led_pins_olinuxino: led-pin {
 		pins = "PG9";
 		function = "gpio_out";
 		drive-strength = <20>;
 	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PG2";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		pins = "PG1";
-		function = "gpio_in";
-		bias-pull-down;
-	};
-
-	usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
-		pins = "PG11";
-		function = "gpio_out";
-	};
 };
 
 &reg_usb0_vbus {
@@ -240,7 +210,6 @@
 };
 
 &reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
 	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
@@ -260,7 +229,7 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>;
+	pinctrl-0 = <&uart1_pg_pins>;
 	status = "okay";
 };
 
@@ -270,10 +239,8 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-614-plus.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-614-plus.dts
new file mode 100644
index 000000000000..ab8d138dc11d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-614-plus.dts
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 Denis Burkov <hitechshell@mail.ru>
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "PocketBook 614 Plus";
+	compatible = "pocketbook,614-plus", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			linux,default-trigger = "default-on";
+			gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-0 {
+			label = "Right";
+			linux,code = <KEY_NEXT>;
+			gpios = <&pio 6 9 GPIO_ACTIVE_LOW>; /* PG9 */
+		};
+
+		key-1 {
+			label = "Left";
+			linux,code = <KEY_PREVIOUS>;
+			gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
+		};
+	};
+
+	reg_3v3_mmc0: regulator-mmc0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-mmc0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */
+		vin-supply = <&reg_vcc3v3>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-300 {
+		label = "Down";
+		linux,code = <KEY_DOWN>;
+		channel = <0>;
+		voltage = <300000>;
+	};
+
+	button-700 {
+		label = "Up";
+		linux,code = <KEY_UP>;
+		channel = <0>;
+		voltage = <700000>;
+	};
+
+	button-1000 {
+		label = "Left";
+		linux,code = <KEY_LEFT>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button-1200 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+
+	button-1500 {
+		label = "Right";
+		linux,code = <KEY_RIGHT>;
+		channel = <0>;
+		voltage = <1500000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_3v3_mmc0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pc_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts
new file mode 100644
index 000000000000..d60407772e5d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2019 Ondrej Jirman <megous@megous.com>
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "PocketBook Touch Lux 3";
+	compatible = "pocketbook,touch-lux-3", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		enable-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		power-supply = <&reg_vcc3v3>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		label = "GPIO Keys";
+
+		key-right {
+			label = "Right";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&pio 6 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG9 */
+		};
+
+		key-left {
+			label = "Left";
+			linux,code = <KEY_LEFT>;
+			gpios = <&pio 6 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG10 */
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-1v8-nor-ctp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 2 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_1v8_nor: regulator-nor {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-nor";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 2 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_1v8>;
+		regulator-always-on;
+	};
+
+	reg_1v8_ctp: regulator-ctp {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-ctp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 2 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_1v8>;
+	};
+
+	reg_3v3_mmc0: regulator-mmc0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-mmc0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */
+		vin-supply = <&reg_vcc3v3>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* Touchpanel is connected here. */
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Home";
+		linux,code = <KEY_HOME>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_3v3_mmc0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pc_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+	/* We need this otherwise the LDO3 would overload */
+	regulator-soft-start;
+	regulator-ramp-delay = <1600>;
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pe_pins>, <&spi2_cs0_pe_pin>;
+	status = "okay";
+
+	epd_flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "macronix,mx25u4033", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-q8-tablet.dts
index a89f29fa3e40..f9fc1c8b60b8 100644
--- a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-q8-tablet.dts
@@ -49,19 +49,13 @@
 	compatible = "allwinner,q8-a13", "allwinner,sun5i-a13";
 
 	panel: panel {
-		compatible = "urt,umsh-8596md-t", "simple-panel";
-		#address-cells = <1>;
-		#size-cells = <0>;
+		compatible = "bananapi,s070wv20-ct16";
+		power-supply = <&reg_vcc3v3>;
+		enable-gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; /* AXP GPIO0 */
+		backlight = <&backlight>;
 
-		port@0 {
-			reg = <0>;
-			/* TODO: lcd panel uses axp gpio0 as enable pin */
-			backlight = <&backlight>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			panel_input: endpoint@0 {
-				reg = <0>;
+		port {
+			panel_input: endpoint {
 				remote-endpoint = <&tcon0_out_lcd>;
 			};
 		};
diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-utoo-p66.dts
index bfdd38d6bfcc..be486d28d04f 100644
--- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-utoo-p66.dts
@@ -58,13 +58,11 @@
 		/delete-property/stdout-path;
 	};
 
-	i2c_lcd: i2c@0 {
+	i2c_lcd: i2c {
 		/* The lcd panel i2c interface is hooked up via gpios */
 		compatible = "i2c-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c_lcd_pins>;
-		gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>, /* PG12, sda */
-			<&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10, scl */
+		sda-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
+		scl-gpios = <&pio 6 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG10 */
 		i2c-gpio,delay-us = <5>;
 	};
 };
@@ -79,13 +77,9 @@
 	allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */
 };
 
-&codec_pa_pin {
-	pins = "PG3";
-};
-
 &mmc2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins_a>;
+	pinctrl-0 = <&mmc2_8bit_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <8>;
 	non-removable;
@@ -98,14 +92,6 @@
 	};
 };
 
-&pio {
-	i2c_lcd_pins: i2c_lcd_pin@0 {
-		pins = "PG10", "PG12";
-		function = "gpio_out";
-		bias-pull-up;
-	};
-};
-
 &reg_usb0_vbus {
 	gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
 };
@@ -128,7 +114,3 @@
 	/* The P66 uses the uart pins as gpios */
 	status = "disabled";
 };
-
-&usb0_vbus_pin_a {
-	pins = "PB4";
-};
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/allwinner/sun5i-a13.dtsi
index 6436bad94404..2c9152b151be 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13.dtsi
@@ -42,17 +42,13 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
-
 #include "sun5i.dtsi"
 
 #include <dt-bindings/thermal/thermal.h>
 
 / {
-	interrupt-parent = <&intc>;
-
 	thermal-zones {
-		cpu_thermal {
+		cpu-thermal {
 			/* milliseconds */
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
@@ -66,14 +62,14 @@
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit: cpu_crit {
+				cpu_crit: cpu-crit {
 					/* milliCelsius */
 					temperature = <100000>;
 					hysteresis = <2000>;
@@ -88,8 +84,8 @@
 		allwinner,pipelines = <&fe0>;
 	};
 
-	soc@01c00000 {
-		pwm: pwm@01c20e00 {
+	soc {
+		pwm: pwm@1c20e00 {
 			compatible = "allwinner,sun5i-a13-pwm";
 			reg = <0x01c20e00 0xc>;
 			clocks = <&ccu CLK_HOSC>;
@@ -106,18 +102,15 @@
 
 &cpu0 {
 	clock-latency = <244144>; /* 8 32k periods */
-	operating-points = <
+	operating-points =
 		/* kHz	  uV */
-		1008000 1400000
-		912000	1350000
-		864000	1300000
-		624000	1200000
-		576000	1200000
-		432000	1200000
-		>;
+		<1008000 1400000>,
+		<912000 1350000>,
+		<864000 1300000>,
+		<624000 1200000>,
+		<576000 1200000>,
+		<432000 1200000>;
 	#cooling-cells = <2>;
-	cooling-min-level = <0>;
-	cooling-max-level = <5>;
 };
 
 &pio {
diff --git a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts b/arch/arm/boot/dts/allwinner/sun5i-gr8-chip-pro.dts
index c55b11a4d3c7..ffbd99c176db 100644
--- a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-gr8-chip-pro.dts
@@ -70,17 +70,15 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-0 {
 			label = "chip-pro:white:status";
 			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
-	mmc0_pwrseq: mmc0_pwrseq {
+	mmc0_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_reg_on_pin_chip_pro>;
 		reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
 	};
 };
@@ -94,8 +92,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -114,20 +110,16 @@
 #include "axp209.dtsi"
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "disabled";
 };
 
 &i2s0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>;
+	pinctrl-0 = <&i2s0_mclk_pin>, <&i2s0_data_pins>;
 	status = "disabled";
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	mmc-pwrseq = <&mmc0_pwrseq>;
 	bus-width = <4>;
@@ -137,12 +129,10 @@
 
 &nfc {
 	pinctrl-names = "default";
-	pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
+	pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
 	status = "okay";
 
 	nand@0 {
-		#address-cells = <2>;
-		#size-cells = <2>;
 		reg = <0>;
 		allwinner,rb = <0>;
 		nand-ecc-mode = "hw";
@@ -157,21 +147,9 @@
 	status = "okay";
 };
 
-&pio {
-	usb0_id_pin_chip_pro: usb0-id-pin@0 {
-		pins = "PG2";
-		function = "gpio_in";
-	};
-
-	wifi_reg_on_pin_chip_pro: wifi-reg-on-pin@0 {
-		pins = "PB10";
-		function = "gpio_out";
-	};
-};
-
 &pwm {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins>, <&pwm1_pins>;
+	pinctrl-0 = <&pwm0_pin>, <&pwm1_pins>;
 	status = "disabled";
 };
 
@@ -220,19 +198,19 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>, <&uart1_cts_rts_pins_a>;
+	pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pins>;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins_a>, <&uart2_cts_rts_pins_a>;
+	pinctrl-0 = <&uart2_pd_pins>, <&uart2_cts_rts_pd_pins>;
 	status = "disabled";
 };
 
 &uart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins_a>, <&uart3_cts_rts_pins_a>;
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_cts_rts_pg_pins>;
 	status = "okay";
 };
 
@@ -253,9 +231,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_pin_chip_pro>;
-	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb1_vbus-supply = <&reg_vcc5v0>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/allwinner/sun5i-gr8-evb.dts
index 558c16a30543..f4fe258ef06d 100644
--- a/arch/arm/boot/dts/sun5i-gr8-evb.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-gr8-evb.dts
@@ -71,7 +71,7 @@
 		compatible = "pwm-backlight";
 		pwms = <&pwm 0 10000 0>;
 		enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
-
+		power-supply = <&reg_vcc3v3>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
 	};
@@ -123,8 +123,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -143,8 +141,6 @@
 #include "axp209.dtsi"
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
 	wm8978: codec@1a {
@@ -154,26 +150,24 @@
 	};
 
 	pcf8563: rtc@51 {
-		compatible = "phg,pcf8563";
+		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };
 
 &i2s0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>;
+	pinctrl-0 = <&i2s0_mclk_pin>, <&i2s0_data_pins>;
 	status = "okay";
 };
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pin>;
 	status = "okay";
 };
 
@@ -181,49 +175,49 @@
 	vref-supply = <&reg_ldo2>;
 	status = "okay";
 
-	button@190 {
+	button-190 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <190000>;
 	};
 
-	button@390 {
+	button-390 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
 		voltage = <390000>;
 	};
 
-	button@600 {
+	button-600 {
 		label = "Menu";
 		linux,code = <KEY_MENU>;
 		channel = <0>;
 		voltage = <600000>;
 	};
 
-	button@800 {
+	button-800 {
 		label = "Search";
 		linux,code = <KEY_SEARCH>;
 		channel = <0>;
 		voltage = <800000>;
 	};
 
-	button@980 {
+	button-980 {
 		label = "Home";
 		linux,code = <KEY_HOMEPAGE>;
 		channel = <0>;
 		voltage = <980000>;
 	};
 
-	button@1180 {
+	button-1180 {
 		label = "Esc";
 		linux,code = <KEY_ESC>;
 		channel = <0>;
 		voltage = <1180000>;
 	};
 
-	button@1400 {
+	button-1400 {
 		label = "Enter";
 		linux,code = <KEY_ENTER>;
 		channel = <0>;
@@ -232,18 +226,15 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gr8_evb>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
-	cd-inverted;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
 	status = "okay";
 };
 
 &nfc {
 	pinctrl-names = "default";
-	pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
+	pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
 
 	/* MLC Support sucks for now */
 	status = "disabled";
@@ -257,31 +248,9 @@
 	status = "okay";
 };
 
-&pio {
-	mmc0_cd_pin_gr8_evb: mmc0-cd-pin@0 {
-		pins = "PG0";
-		function = "gpio_in";
-	};
-
-	usb0_id_pin_gr8_evb: usb0-id-pin@0 {
-		pins = "PG2";
-		function = "gpio_in";
-	};
-
-	usb0_vbus_det_pin_gr8_evb: usb0-vbus-det-pin@0 {
-		pins = "PG1";
-		function = "gpio_in";
-	};
-
-	usb1_vbus_pin_gr8_evb: usb1-vbus-pin@0 {
-		pins = "PG13";
-		function = "gpio_out";
-	};
-};
-
 &pwm {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-0 = <&pwm0_pin>;
 	status = "okay";
 };
 
@@ -311,7 +280,6 @@
 };
 
 &reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_gr8_evb>;
 	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
@@ -322,7 +290,7 @@
 
 &spdif {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spdif_tx_pins_a>;
+	pinctrl-0 = <&spdif_tx_pin>;
 	status = "okay";
 };
 
@@ -332,7 +300,7 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>, <&uart1_cts_rts_pins_a>;
+	pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pins>;
 	status = "okay";
 };
 
@@ -357,10 +325,8 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_pin_gr8_evb>, <&usb0_vbus_det_pin_gr8_evb>;
-	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun5i-gr8.dtsi b/arch/arm/boot/dts/allwinner/sun5i-gr8.dtsi
index 3eb56cad0cea..98a8fd5e89e8 100644
--- a/arch/arm/boot/dts/sun5i-gr8.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun5i-gr8.dtsi
@@ -54,8 +54,8 @@
 		allwinner,pipelines = <&fe0>;
 	};
 
-	soc@01c00000 {
-		pwm: pwm@01c20e00 {
+	soc {
+		pwm: pwm@1c20e00 {
 			compatible = "allwinner,sun5i-a10s-pwm";
 			reg = <0x01c20e00 0xc>;
 			clocks = <&ccu CLK_HOSC>;
@@ -63,7 +63,7 @@
 			status = "disabled";
 		};
 
-		spdif: spdif@01c21000 {
+		spdif: spdif@1c21000 {
 			#sound-dai-cells = <0>;
 			compatible = "allwinner,sun4i-a10-spdif";
 			reg = <0x01c21000 0x400>;
@@ -76,7 +76,7 @@
 			status = "disabled";
 		};
 
-		i2s0: i2s@01c22400 {
+		i2s0: i2s@1c22400 {
 			#sound-dai-cells = <0>;
 			compatible = "allwinner,sun4i-a10-i2s";
 			reg = <0x01c22400 0x400>;
@@ -98,28 +98,28 @@
 &pio {
 	compatible = "nextthing,gr8-pinctrl";
 
-	i2s0_data_pins_a: i2s0-data@0 {
+	i2s0_data_pins: i2s0-data-pins {
 		pins = "PB6", "PB7", "PB8", "PB9";
 		function = "i2s0";
 	};
 
-	i2s0_mclk_pins_a: i2s0-mclk@0 {
+	i2s0_mclk_pin: i2s0-mclk-pin {
 		pins = "PB5";
 		function = "i2s0";
 	};
 
-	pwm1_pins: pwm1 {
+	pwm1_pins: pwm1-pin {
 		pins = "PG13";
 		function = "pwm1";
 	};
 
-	spdif_tx_pins_a: spdif@0 {
+	spdif_tx_pin: spdif-tx-pin {
 		pins = "PB10";
 		function = "spdif";
 		bias-pull-up;
 	};
 
-	uart1_cts_rts_pins_a: uart1-cts-rts@0 {
+	uart1_cts_rts_pins: uart1-cts-rts-pins {
 		pins = "PG5", "PG6";
 		function = "uart1";
 	};
diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/allwinner/sun5i-r8-chip.dts
index 879a4b0f3bd5..8c784a2c086e 100644
--- a/arch/arm/boot/dts/sun5i-r8-chip.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-r8-chip.dts
@@ -70,25 +70,21 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-0 {
 			label = "chip:white:status";
 			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
-	mmc0_pwrseq: mmc0_pwrseq {
+	mmc0_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&chip_wifi_reg_on_pin>;
 		reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */
 	};
 
 	onewire {
 		compatible = "w1-gpio";
-		gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
-		pinctrl-names = "default";
-		pinctrl-0 = <&chip_w1_pin>;
+		gpios = <&pio 3 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD2 */
 	};
 };
 
@@ -109,8 +105,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -137,14 +131,10 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "disabled";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 
 	xio: gpio@38 {
@@ -161,13 +151,11 @@
 	};
 };
 
-&mmc0_pins_a {
+&mmc0_pins {
 	bias-pull-up;
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	mmc-pwrseq = <&mmc0_pwrseq>;
 	bus-width = <4>;
@@ -183,29 +171,6 @@
 	status = "okay";
 };
 
-&pio {
-	chip_vbus_pin: chip_vbus_pin@0 {
-		pins = "PB10";
-		function = "gpio_out";
-	};
-
-	chip_wifi_reg_on_pin: chip_wifi_reg_on_pin@0 {
-	        pins = "PC19";
-	        function = "gpio_out";
-	};
-
-	chip_id_det_pin: chip_id_det_pin@0 {
-		pins = "PG2";
-		function = "gpio_in";
-	};
-
-	chip_w1_pin: chip_w1_pin@0 {
-		pins = "PD2";
-		function = "gpio_in";
-	        bias-pull-up;
-	};
-};
-
 &reg_dcdc2 {
 	regulator-min-microvolt = <1000000>;
 	regulator-max-microvolt = <1400000>;
@@ -260,7 +225,6 @@
 };
 
 &reg_usb0_vbus {
-	pinctrl-0 = <&chip_vbus_pin>;
 	vin-supply = <&reg_vcc5v0>;
 	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
 	status = "okay";
@@ -268,7 +232,7 @@
 
 &spi2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins_a>;
+	pinctrl-0 = <&spi2_pe_pins>;
 	status = "disabled";
 };
 
@@ -282,15 +246,21 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>;
+	pinctrl-0 = <&uart1_pg_pins>;
 	status = "okay";
 };
 
 &uart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins_a>,
-		    <&uart3_cts_rts_pins_a>;
+	pinctrl-0 = <&uart3_pg_pins>,
+		    <&uart3_cts_rts_pg_pins>;
 	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&axp_gpio 3 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	};
 };
 
 &usb_otg {
@@ -303,11 +273,9 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&chip_id_det_pin>;
 	status = "okay";
 
-	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_vcc5v0>;
diff --git a/arch/arm/boot/dts/sun5i-r8.dtsi b/arch/arm/boot/dts/allwinner/sun5i-r8.dtsi
index de35dbcd1191..de35dbcd1191 100644
--- a/arch/arm/boot/dts/sun5i-r8.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun5i-r8.dtsi
diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/allwinner/sun5i-reference-design-tablet.dtsi
index 8a4d2277826f..6847f66699ac 100644
--- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun5i-reference-design-tablet.dtsi
@@ -54,7 +54,8 @@
 		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
-		/* TODO: backlight uses axp gpio1 as enable pin */
+		enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; /* AXP GPIO1 */
+		power-supply = <&reg_vcc3v0>;
 	};
 
 	chosen {
@@ -63,8 +64,6 @@
 };
 
 &codec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&codec_pa_pin>;
 	allwinner,pa-gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
 	status = "okay";
 };
@@ -92,11 +91,10 @@
 	 */
 	clock-frequency = <400000>;
 
-	touchscreen: touchscreen {
+	touchscreen: touchscreen@40 {
+		reg = <0x40>;
 		interrupt-parent = <&pio>;
 		interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_power_pin>;
 		power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
 		/* Tablet dts must provide reg and compatible */
 		status = "disabled";
@@ -110,17 +108,24 @@
 
 #include "axp209.dtsi"
 
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
 &lradc {
 	vref-supply = <&reg_ldo2>;
 };
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v0>;
 	bus-width = <4>;
-	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
-	cd-inverted;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
 	status = "okay";
 };
 
@@ -128,43 +133,6 @@
 	status = "okay";
 };
 
-&pio {
-	codec_pa_pin: codec_pa_pin@0 {
-		pins = "PG10";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin: mmc0_cd_pin@0 {
-		pins = "PG0";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	ts_power_pin: ts_power_pin {
-		pins = "PB3";
-		function = "gpio_out";
-		drive-strength = <10>;
-		bias-disable;
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		pins = "PG1";
-		function = "gpio_in";
-		bias-pull-down;
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PG2";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_vbus_pin_a: usb0_vbus_pin@0 {
-		pins = "PG12";
-		function = "gpio_out";
-	};
-};
-
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -203,7 +171,7 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>;
+	pinctrl-0 = <&uart1_pg_pins>;
 	status = "okay";
 };
 
@@ -217,10 +185,8 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_ldo3>;
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/allwinner/sun5i.dtsi
index 98cc00341b00..d7c7b454a11a 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun5i.dtsi
@@ -42,14 +42,14 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
-
 #include <dt-bindings/clock/sun5i-ccu.h>
 #include <dt-bindings/dma/sun4i-a10.h>
 #include <dt-bindings/reset/sun5i-ccu.h>
 
 / {
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	cpus {
 		#address-cells = <1>;
@@ -68,7 +68,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		framebuffer@0 {
+		framebuffer-lcd0 {
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
@@ -77,7 +77,7 @@
 			status = "disabled";
 		};
 
-		framebuffer@1 {
+		framebuffer-lcd0-tve0 {
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-tve0";
@@ -93,14 +93,14 @@
 		#size-cells = <1>;
 		ranges;
 
-		osc24M: clk@01c20050 {
+		osc24M: clk-24M {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
 			clock-output-names = "osc24M";
 		};
 
-		osc32k: clk@0 {
+		osc32k: clk-32k {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
@@ -108,49 +108,91 @@
 		};
 	};
 
-	soc@01c00000 {
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+		default-pool {
+			compatible = "shared-dma-pool";
+			size = <0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
+		dma-ranges;
 		ranges;
 
-		sram-controller@01c00000 {
-			compatible = "allwinner,sun4i-a10-sram-controller";
+		system-control@1c00000 {
+			compatible = "allwinner,sun5i-a13-system-control";
 			reg = <0x01c00000 0x30>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
 
-			sram_a: sram@00000000 {
+			sram_a: sram@0 {
 				compatible = "mmio-sram";
 				reg = <0x00000000 0xc000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges = <0 0x00000000 0xc000>;
-			};
 
-			emac_sram: sram-section@8000 {
-				compatible = "allwinner,sun4i-a10-sram-a3-a4";
-				reg = <0x8000 0x4000>;
-				status = "disabled";
+				emac_sram: sram-section@8000 {
+					compatible = "allwinner,sun5i-a13-sram-a3-a4",
+						     "allwinner,sun4i-a10-sram-a3-a4";
+					reg = <0x8000 0x4000>;
+					status = "disabled";
+				};
 			};
 
-			sram_d: sram@00010000 {
+			sram_d: sram@10000 {
 				compatible = "mmio-sram";
 				reg = <0x00010000 0x1000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges = <0 0x00010000 0x1000>;
 
-				otg_sram: sram-section@0000 {
-					compatible = "allwinner,sun4i-a10-sram-d";
+				otg_sram: sram-section@0 {
+					compatible = "allwinner,sun5i-a13-sram-d",
+						     "allwinner,sun4i-a10-sram-d";
 					reg = <0x0000 0x1000>;
 					status = "disabled";
 				};
 			};
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0xd0000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0xd0000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun5i-a13-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		mbus: dram-controller@1c01000 {
+			compatible = "allwinner,sun5i-a13-mbus";
+			reg = <0x01c01000 0x1000>;
+			clocks = <&ccu CLK_MBUS>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x00000000 0x40000000 0x20000000>;
+			#interconnect-cells = <1>;
 		};
 
-		dma: dma-controller@01c02000 {
+		dma: dma-controller@1c02000 {
 			compatible = "allwinner,sun4i-a10-dma";
 			reg = <0x01c02000 0x1000>;
 			interrupts = <27>;
@@ -158,7 +200,7 @@
 			#dma-cells = <2>;
 		};
 
-		nfc: nand@01c03000 {
+		nfc: nand-controller@1c03000 {
 			compatible = "allwinner,sun4i-a10-nand";
 			reg = <0x01c03000 0x1000>;
 			interrupts = <37>;
@@ -171,7 +213,7 @@
 			#size-cells = <0>;
 		};
 
-		spi0: spi@01c05000 {
+		spi0: spi@1c05000 {
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c05000 0x1000>;
 			interrupts = <10>;
@@ -185,7 +227,7 @@
 			#size-cells = <0>;
 		};
 
-		spi1: spi@01c06000 {
+		spi1: spi@1c06000 {
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c06000 0x1000>;
 			interrupts = <11>;
@@ -199,7 +241,7 @@
 			#size-cells = <0>;
 		};
 
-		tve0: tv-encoder@01c0a000 {
+		tve0: tv-encoder@1c0a000 {
 			compatible = "allwinner,sun4i-a10-tv-encoder";
 			reg = <0x01c0a000 0x1000>;
 			clocks = <&ccu CLK_AHB_TVE>;
@@ -207,17 +249,14 @@
 			status = "disabled";
 
 			port {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				tve0_in_tcon0: endpoint@0 {
-					reg = <0>;
+				tve0_in_tcon0: endpoint {
 					remote-endpoint = <&tcon0_out_tve0>;
 				};
 			};
 		};
 
-		emac: ethernet@01c0b000 {
+		emac: ethernet@1c0b000 {
 			compatible = "allwinner,sun4i-a10-emac";
 			reg = <0x01c0b000 0x1000>;
 			interrupts = <55>;
@@ -226,7 +265,7 @@
 			status = "disabled";
 		};
 
-		mdio: mdio@01c0b080 {
+		mdio: mdio@1c0b080 {
 			compatible = "allwinner,sun4i-a10-mdio";
 			reg = <0x01c0b080 0x14>;
 			status = "disabled";
@@ -234,10 +273,11 @@
 			#size-cells = <0>;
 		};
 
-		tcon0: lcd-controller@01c0c000 {
+		tcon0: lcd-controller@1c0c000 {
 			compatible = "allwinner,sun5i-a13-tcon";
 			reg = <0x01c0c000 0x1000>;
 			interrupts = <44>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 14>;
 			resets = <&ccu RST_LCD>;
 			reset-names = "lcd";
 			clocks = <&ccu CLK_AHB_LCD>,
@@ -246,7 +286,8 @@
 			clock-names = "ahb",
 				      "tcon-ch0",
 				      "tcon-ch1";
-			clock-output-names = "tcon-pixel-clock";
+			clock-output-names = "tcon-data-clock";
+			#clock-cells = <0>;
 			status = "disabled";
 
 			ports {
@@ -254,12 +295,9 @@
 				#size-cells = <0>;
 
 				tcon0_in: port@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
 					reg = <0>;
 
-					tcon0_in_be0: endpoint@0 {
-						reg = <0>;
+					tcon0_in_be0: endpoint {
 						remote-endpoint = <&be0_out_tcon0>;
 					};
 				};
@@ -278,18 +316,31 @@
 			};
 		};
 
-		mmc0: mmc@01c0f000 {
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun5i-a13-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_VE>;
+			interrupts = <53>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		mmc0: mmc@1c0f000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c0f000 0x1000>;
 			clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
 			clock-names = "ahb", "mmc";
 			interrupts = <32>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
-		mmc1: mmc@01c10000 {
+		mmc1: mmc@1c10000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c10000 0x1000>;
 			clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>;
@@ -300,7 +351,7 @@
 			#size-cells = <0>;
 		};
 
-		mmc2: mmc@01c11000 {
+		mmc2: mmc@1c11000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c11000 0x1000>;
 			clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>;
@@ -311,7 +362,7 @@
 			#size-cells = <0>;
 		};
 
-		usb_otg: usb@01c13000 {
+		usb_otg: usb@1c13000 {
 			compatible = "allwinner,sun4i-a10-musb";
 			reg = <0x01c13000 0x0400>;
 			clocks = <&ccu CLK_AHB_OTG>;
@@ -321,13 +372,14 @@
 			phy-names = "usb";
 			extcon = <&usbphy 0>;
 			allwinner,sram = <&otg_sram 1>;
+			dr_mode = "otg";
 			status = "disabled";
 		};
 
-		usbphy: phy@01c13400 {
+		usbphy: phy@1c13400 {
 			#phy-cells = <1>;
 			compatible = "allwinner,sun5i-a13-usb-phy";
-			reg = <0x01c13400 0x10 0x01c14800 0x4>;
+			reg = <0x01c13400 0x10>, <0x01c14800 0x4>;
 			reg-names = "phy_ctrl", "pmu1";
 			clocks = <&ccu CLK_USB_PHY0>;
 			clock-names = "usb_phy";
@@ -336,7 +388,7 @@
 			status = "disabled";
 		};
 
-		ehci0: usb@01c14000 {
+		ehci0: usb@1c14000 {
 			compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
 			reg = <0x01c14000 0x100>;
 			interrupts = <39>;
@@ -346,7 +398,7 @@
 			status = "disabled";
 		};
 
-		ohci0: usb@01c14400 {
+		ohci0: usb@1c14400 {
 			compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
 			reg = <0x01c14400 0x100>;
 			interrupts = <40>;
@@ -356,7 +408,7 @@
 			status = "disabled";
 		};
 
-		crypto: crypto-engine@01c15000 {
+		crypto: crypto-engine@1c15000 {
 			compatible = "allwinner,sun5i-a13-crypto",
 				     "allwinner,sun4i-a10-crypto";
 			reg = <0x01c15000 0x1000>;
@@ -365,7 +417,7 @@
 			clock-names = "ahb", "mod";
 		};
 
-		spi2: spi@01c17000 {
+		spi2: spi@1c17000 {
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c17000 0x1000>;
 			interrupts = <12>;
@@ -379,7 +431,7 @@
 			#size-cells = <0>;
 		};
 
-		ccu: clock@01c20000 {
+		ccu: clock@1c20000 {
 			reg = <0x01c20000 0x400>;
 			clocks = <&osc24M>, <&osc32k>;
 			clock-names = "hosc", "losc";
@@ -387,14 +439,14 @@
 			#reset-cells = <1>;
 		};
 
-		intc: interrupt-controller@01c20400 {
+		intc: interrupt-controller@1c20400 {
 			compatible = "allwinner,sun4i-a10-ic";
 			reg = <0x01c20400 0x400>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
 		};
 
-		pio: pinctrl@01c20800 {
+		pio: pinctrl@1c20800 {
 			reg = <0x01c20800 0x400>;
 			interrupts = <28>;
 			clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
@@ -404,7 +456,7 @@
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
-			emac_pins_a: emac0@0 {
+			emac_pd_pins: emac-pd-pins {
 				pins = "PD6", "PD7", "PD10",
 				       "PD11", "PD12", "PD13", "PD14",
 				       "PD15", "PD18", "PD19", "PD20",
@@ -413,27 +465,27 @@
 				function = "emac";
 			};
 
-			i2c0_pins_a: i2c0@0 {
+			i2c0_pins: i2c0-pins {
 				pins = "PB0", "PB1";
 				function = "i2c0";
 			};
 
-			i2c1_pins_a: i2c1@0 {
+			i2c1_pins: i2c1-pins {
 				pins = "PB15", "PB16";
 				function = "i2c1";
 			};
 
-			i2c2_pins_a: i2c2@0 {
+			i2c2_pins: i2c2-pins {
 				pins = "PB17", "PB18";
 				function = "i2c2";
 			};
 
-			ir0_rx_pins_a: ir0@0 {
+			ir0_rx_pin: ir0-rx-pin {
 				pins = "PB4";
 				function = "ir0";
 			};
 
-			lcd_rgb565_pins: lcd_rgb565@0 {
+			lcd_rgb565_pins: lcd-rgb565-pins {
 				pins = "PD3", "PD4", "PD5", "PD6", "PD7",
 						 "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
 						 "PD19", "PD20", "PD21", "PD22", "PD23",
@@ -441,7 +493,7 @@
 				function = "lcd0";
 			};
 
-			lcd_rgb666_pins: lcd_rgb666@0 {
+			lcd_rgb666_pins: lcd-rgb666-pins {
 				pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
 				       "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
 				       "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
@@ -449,7 +501,7 @@
 				function = "lcd0";
 			};
 
-			mmc0_pins_a: mmc0@0 {
+			mmc0_pins: mmc0-pins {
 				pins = "PF0", "PF1", "PF2", "PF3",
 				       "PF4", "PF5";
 				function = "mmc0";
@@ -457,24 +509,33 @@
 				bias-pull-up;
 			};
 
-			mmc2_pins_a: mmc2@0 {
+			mmc2_4bit_pc_pins: mmc2-4bit-pc-pins {
 				pins = "PC6", "PC7", "PC8", "PC9",
-				       "PC10", "PC11", "PC12", "PC13",
-				       "PC14", "PC15";
+				       "PC10", "PC11";
 				function = "mmc2";
 				drive-strength = <30>;
 				bias-pull-up;
 			};
 
-			mmc2_4bit_pins_a: mmc2-4bit@0 {
+			/omit-if-no-ref/
+			mmc2_4bit_pe_pins: mmc2-4bit-pe-pins {
+				pins = "PE4", "PE5", "PE6", "PE7",
+				       "PE8", "PE9";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_pins: mmc2-8bit-pins {
 				pins = "PC6", "PC7", "PC8", "PC9",
-				       "PC10", "PC11";
+				       "PC10", "PC11", "PC12", "PC13",
+				       "PC14", "PC15";
 				function = "mmc2";
 				drive-strength = <30>;
 				bias-pull-up;
 			};
 
-			nand_pins_a: nand-base0@0 {
+			nand_pins: nand-pins {
 				pins = "PC0", "PC1", "PC2",
 				       "PC5", "PC8", "PC9", "PC10",
 				       "PC11", "PC12", "PC13", "PC14",
@@ -482,75 +543,82 @@
 				function = "nand0";
 			};
 
-			nand_cs0_pins_a: nand-cs@0 {
+			nand_cs0_pin: nand-cs0-pin {
 				pins = "PC4";
 				function = "nand0";
 			};
 
-			nand_rb0_pins_a: nand-rb@0 {
+			nand_rb0_pin: nand-rb0-pin {
 				pins = "PC6";
 				function = "nand0";
 			};
 
-			spi2_pins_a: spi2@0 {
+			pwm0_pin: pwm0-pin {
+				pins = "PB2";
+				function = "pwm";
+			};
+
+			spi2_pe_pins: spi2-pe-pins {
 				pins = "PE1", "PE2", "PE3";
 				function = "spi2";
 			};
 
-			spi2_cs0_pins_a: spi2-cs0@0 {
+			spi2_cs0_pe_pin: spi2-cs0-pe-pin {
 				pins = "PE0";
 				function = "spi2";
 			};
 
-			uart1_pins_a: uart1@0 {
+			uart1_pe_pins: uart1-pe-pins {
 				pins = "PE10", "PE11";
 				function = "uart1";
 			};
 
-			uart1_pins_b: uart1@1 {
+			uart1_pg_pins: uart1-pg-pins {
 				pins = "PG3", "PG4";
 				function = "uart1";
 			};
 
-			uart2_pins_a: uart2@0 {
+			uart2_pd_pins: uart2-pd-pins {
 				pins = "PD2", "PD3";
 				function = "uart2";
 			};
 
-			uart2_cts_rts_pins_a: uart2-cts-rts@0 {
+			uart2_cts_rts_pd_pins: uart2-cts-rts-pd-pins {
 				pins = "PD4", "PD5";
 				function = "uart2";
 			};
 
-			uart3_pins_a: uart3@0 {
+			uart3_pg_pins: uart3-pg-pins {
 				pins = "PG9", "PG10";
 				function = "uart3";
 			};
 
-			uart3_cts_rts_pins_a: uart3-cts-rts@0 {
+			uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins {
 				pins = "PG11", "PG12";
 				function = "uart3";
 			};
-
-			pwm0_pins: pwm0 {
-				pins = "PB2";
-				function = "pwm";
-			};
 		};
 
-		timer@01c20c00 {
+		timer@1c20c00 {
 			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0x90>;
-			interrupts = <22>;
+			interrupts = <22>,
+				     <23>,
+				     <24>,
+				     <25>,
+				     <67>,
+				     <68>;
 			clocks = <&ccu CLK_HOSC>;
 		};
 
-		wdt: watchdog@01c20c90 {
+		wdt: watchdog@1c20c90 {
 			compatible = "allwinner,sun4i-a10-wdt";
 			reg = <0x01c20c90 0x10>;
+			interrupts = <24>;
+			clocks = <&osc24M>;
 		};
 
-		ir0: ir@01c21800 {
+		ir0: ir@1c21800 {
 			compatible = "allwinner,sun4i-a10-ir";
 			clocks = <&ccu CLK_APB0_IR>, <&ccu CLK_IR>;
 			clock-names = "apb", "ir";
@@ -559,14 +627,14 @@
 			status = "disabled";
 		};
 
-		lradc: lradc@01c22800 {
+		lradc: lradc@1c22800 {
 			compatible = "allwinner,sun4i-a10-lradc-keys";
 			reg = <0x01c22800 0x100>;
 			interrupts = <31>;
 			status = "disabled";
 		};
 
-		codec: codec@01c22c00 {
+		codec: codec@1c22c00 {
 			#sound-dai-cells = <0>;
 			compatible = "allwinner,sun4i-a10-codec";
 			reg = <0x01c22c00 0x40>;
@@ -579,19 +647,19 @@
 			status = "disabled";
 		};
 
-		sid: eeprom@01c23800 {
+		sid: eeprom@1c23800 {
 			compatible = "allwinner,sun4i-a10-sid";
 			reg = <0x01c23800 0x10>;
 		};
 
-		rtp: rtp@01c25000 {
+		rtp: rtp@1c25000 {
 			compatible = "allwinner,sun5i-a13-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <29>;
 			#thermal-sensor-cells = <0>;
 		};
 
-		uart0: serial@01c28000 {
+		uart0: serial@1c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
 			interrupts = <1>;
@@ -601,7 +669,7 @@
 			status = "disabled";
 		};
 
-		uart1: serial@01c28400 {
+		uart1: serial@1c28400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28400 0x400>;
 			interrupts = <2>;
@@ -611,7 +679,7 @@
 			status = "disabled";
 		};
 
-		uart2: serial@01c28800 {
+		uart2: serial@1c28800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28800 0x400>;
 			interrupts = <3>;
@@ -621,7 +689,7 @@
 			status = "disabled";
 		};
 
-		uart3: serial@01c28c00 {
+		uart3: serial@1c28c00 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28c00 0x400>;
 			interrupts = <4>;
@@ -631,44 +699,62 @@
 			status = "disabled";
 		};
 
-		i2c0: i2c@01c2ac00 {
+		i2c0: i2c@1c2ac00 {
 			compatible = "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <7>;
 			clocks = <&ccu CLK_APB1_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
-		i2c1: i2c@01c2b000 {
+		i2c1: i2c@1c2b000 {
 			compatible = "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <8>;
 			clocks = <&ccu CLK_APB1_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
-		i2c2: i2c@01c2b400 {
+		i2c2: i2c@1c2b400 {
 			compatible = "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <9>;
 			clocks = <&ccu CLK_APB1_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
-		timer@01c60000 {
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun4i-a10-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <69>, <70>, <71>, <72>,  <73>;
+			interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pmu";
+			clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_GPU>;
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <320000000>;
+		};
+
+		timer@1c60000 {
 			compatible = "allwinner,sun5i-a13-hstimer";
 			reg = <0x01c60000 0x1000>;
 			interrupts = <82>, <83>;
 			clocks = <&ccu CLK_AHB_HSTIMER>;
 		};
 
-		fe0: display-frontend@01e00000 {
+		fe0: display-frontend@1e00000 {
 			compatible = "allwinner,sun5i-a13-display-frontend";
 			reg = <0x01e00000 0x20000>;
 			interrupts = <47>;
@@ -677,6 +763,8 @@
 			clock-names = "ahb", "mod",
 				      "ram";
 			resets = <&ccu RST_DE_FE>;
+			interconnects = <&mbus 19>;
+			interconnect-names = "dma-mem";
 			status = "disabled";
 
 			ports {
@@ -684,19 +772,16 @@
 				#size-cells = <0>;
 
 				fe0_out: port@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
 					reg = <1>;
 
-					fe0_out_be0: endpoint@0 {
-						reg = <0>;
+					fe0_out_be0: endpoint {
 						remote-endpoint = <&be0_in_fe0>;
 					};
 				};
 			};
 		};
 
-		be0: display-backend@01e60000 {
+		be0: display-backend@1e60000 {
 			compatible = "allwinner,sun5i-a13-display-backend";
 			reg = <0x01e60000 0x10000>;
 			interrupts = <47>;
@@ -705,33 +790,26 @@
 			clock-names = "ahb", "mod",
 				      "ram";
 			resets = <&ccu RST_DE_BE>;
+			interconnects = <&mbus 18>;
+			interconnect-names = "dma-mem";
 			status = "disabled";
 
-			assigned-clocks = <&ccu CLK_DE_BE>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
 				be0_in: port@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
 					reg = <0>;
 
-					be0_in_fe0: endpoint@0 {
-						reg = <0>;
+					be0_in_fe0: endpoint {
 						remote-endpoint = <&fe0_out_be0>;
 					};
 				};
 
 				be0_out: port@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
 					reg = <1>;
 
-					be0_out_tcon0: endpoint@0 {
-						reg = <0>;
+					be0_out_tcon0: endpoint {
 						remote-endpoint = <&tcon0_in_be0>;
 					};
 				};
diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-app4-evb1.dts
index 7f34323a668c..32d22025ac99 100644
--- a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-app4-evb1.dts
@@ -65,22 +65,14 @@
 	status = "okay";
 };
 
-&pio {
-	usb1_vbus_pin_a: usb1_vbus_pin@0 {
-		pins = "PH27";
-		function = "gpio_out";
-	};
-};
-
 &reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_a>;
 	gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-colombus.dts
index 85eff0307ca4..93a15eaaa8cb 100644
--- a/arch/arm/boot/dts/sun6i-a31-colombus.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-colombus.dts
@@ -60,13 +60,11 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	i2c_lcd: i2c@0 {
+	i2c_lcd: i2c {
 		/* The lcd panel i2c interface is hooked up via gpios */
 		compatible = "i2c-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c_lcd_pins>;
-		gpios = <&pio 0 23 GPIO_ACTIVE_HIGH>, /* PA23, sda */
-			<&pio 0 24 GPIO_ACTIVE_HIGH>; /* PA24, scl */
+		sda-gpios = <&pio 0 23 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA23 */
+		scl-gpios = <&pio 0 24 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA24 */
 		i2c-gpio,delay-us = <5>;
 	};
 };
@@ -77,31 +75,21 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_rgmii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "fail";
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 
 	mma8452: mma8452@1d {
@@ -112,49 +100,27 @@
 	};
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
 	vmmc-supply = <&reg_vcc3v0>;
 	bus-width = <4>;
-	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
-	cd-inverted;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
 	status = "okay";
 };
 
-&mmc0_pins_a {
-	bias-pull-up;
-};
-
-&pio {
-	mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
-		pins = "PA8";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
-		pins = "PH24";
-		function = "gpio_out";
-	};
-
-	i2c_lcd_pins: i2c_lcd_pin@0 {
-		pins = "PA23", "PA24";
-		function = "gpio_out";
-		bias-pull-up;
-	};
-};
-
 &reg_usb2_vbus {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb2_vbus_pin_colombus>;
 	gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts
index 9ecb5f0b3f83..5bce7a32651e 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts
@@ -62,6 +62,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	vga-connector {
 		compatible = "vga-connector";
 
@@ -75,38 +86,30 @@
 	vga-dac {
 		compatible = "dumb-vga-dac";
 		vdd-supply = <&reg_vga_3v3>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
 			port@0 {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				reg = <0>;
 
-				vga_dac_in: endpoint@0 {
-					reg = <0>;
+				vga_dac_in: endpoint {
 					remote-endpoint = <&tcon0_out_vga>;
 				};
 			};
 
 			port@1 {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				reg = <1>;
 
-				vga_dac_out: endpoint@0 {
-					reg = <0>;
+				vga_dac_out: endpoint {
 					remote-endpoint = <&vga_con_in>;
 				};
 			};
 		};
 	};
 
-	reg_vga_3v3: vga_3v3_regulator {
+	reg_vga_3v3: vga-3v3-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vga-3v3";
 		regulator-min-microvolt = <3300000>;
@@ -116,7 +119,7 @@
 		gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
 	};
@@ -149,35 +152,32 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_hummingbird>;
-	phy = <&phy1>;
-	phy-mode = "rgmii";
-	snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 30000>;
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
 	status = "okay";
+};
 
-	phy1: ethernet-phy@1 {
-		reg = <1>;
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
 	};
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	/* pull-ups and devices require AXP221 DLDO3 */
 	status = "failed";
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 
 	pcf8563: rtc@51 {
@@ -188,28 +188,27 @@
 
 &ir {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir_pins_a>;
+	pinctrl-0 = <&s_ir_rx_pin>;
 	status = "okay";
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
-	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
-	cd-inverted;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
 	status = "okay";
 };
 
-&mmc0_pins_a {
-	/* external pull-ups missing for some pins */
-	bias-pull-up;
-};
-
 &mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>;
 	vmmc-supply = <&reg_aldo1>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
@@ -221,32 +220,14 @@
 	status = "okay";
 };
 
-&pio {
-	gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 {
-		pins = "PA21";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
-		pins = "PA8";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	wifi_reset_pin_hummingbird: wifi_reset_pin@0 {
-		pins = "PG10";
-		function = "gpio_out";
-	};
-};
-
 &p2wi {
 	status = "okay";
 
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		x-powers,drive-vbus-en;
 	};
 };
@@ -334,7 +315,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
 
@@ -348,8 +329,8 @@
 };
 
 &usbphy {
-	usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
-	usb0_vbus_det-gpio = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
+	usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+	usb0_vbus_det-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_drivevbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-i7.dts
index 010a84c7c012..744723d956f0 100644
--- a/arch/arm/boot/dts/sun6i-a31-i7.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-i7.dts
@@ -58,12 +58,21 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_i7>;
 
-		blue {
+		led {
 			label = "i7:blue:usr";
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
 		};
@@ -93,6 +102,10 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -103,67 +116,59 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_mii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
+};
 
-	phy1: ethernet-phy@1 {
-		reg = <1>;
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
 	};
 };
 
 &ir {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir_pins_a>;
+	pinctrl-0 = <&s_ir_rx_pin>;
 	status = "okay";
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
-	cd-inverted;
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
 	status = "okay";
 };
 
-&pio {
-	led_pins_i7: led_pins@0 {
-		pins = "PH13";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin_i7: mmc0_cd_pin@0 {
-		pins = "PH22";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb1_vbus_pin_i7: usb1_vbus_pin@0 {
-		pins = "PC27";
-		function = "gpio_out";
-	};
-};
-
 &reg_usb1_vbus {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_vbus_pin_i7>;
 	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &spdif {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spdif_pins_a>;
-	spdif-out = "okay";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&tcon0 {
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-m9.dts
index 50605fd4449e..7d2eaaf5c33e 100644
--- a/arch/arm/boot/dts/sun6i-a31-m9.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-m9.dts
@@ -60,10 +60,8 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_m9>;
 
-		blue {
+		led {
 			label = "m9:blue:pwr";
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -85,30 +83,29 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_mii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	phy-supply = <&reg_dldo1>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &ir {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir_pins_a>;
+	pinctrl-0 = <&s_ir_rx_pin>;
 	status = "okay";
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
-	cd-inverted;
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
 	status = "okay";
 };
 
@@ -118,31 +115,13 @@
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
 #include "axp22x.dtsi"
 
-&pio {
-	led_pins_m9: led_pins@0 {
-		pins = "PH13";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin_m9: mmc0_cd_pin@0 {
-		pins = "PH22";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb1_vbus_pin_m9: usb1_vbus_pin@0 {
-		pins = "PC27";
-		function = "gpio_out";
-	};
-};
-
 &reg_aldo1 {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
@@ -216,15 +195,13 @@
 };
 
 &reg_usb1_vbus {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_vbus_pin_m9>;
 	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-mele-a1000g-quad.dts
index 5219556e9f73..83611434270c 100644
--- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-mele-a1000g-quad.dts
@@ -60,10 +60,8 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_m9>;
 
-		blue {
+		led {
 			label = "a1000g:blue:pwr";
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -85,30 +83,29 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_mii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	phy-supply = <&reg_dldo1>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &ir {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir_pins_a>;
+	pinctrl-0 = <&s_ir_rx_pin>;
 	status = "okay";
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
-	cd-inverted;
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
 	status = "okay";
 };
 
@@ -118,31 +115,13 @@
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
 #include "axp22x.dtsi"
 
-&pio {
-	led_pins_m9: led_pins@0 {
-		pins = "PH13";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin_m9: mmc0_cd_pin@0 {
-		pins = "PH22";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb1_vbus_pin_m9: usb1_vbus_pin@0 {
-		pins = "PC27";
-		function = "gpio_out";
-	};
-};
-
 &reg_aldo1 {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
@@ -216,15 +195,13 @@
 };
 
 &reg_usb1_vbus {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_vbus_pin_m9>;
 	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/allwinner/sun6i-a31.dtsi
index aebc3f9dc7b6..f0145d6b9c53 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31.dtsi
@@ -42,16 +42,17 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
-
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
 
 #include <dt-bindings/clock/sun6i-a31-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/reset/sun6i-a31-ccu.h>
 
 / {
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		ethernet0 = &gmac;
@@ -62,7 +63,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		simplefb_hdmi: framebuffer@0 {
+		simplefb_hdmi: framebuffer-lcd0-hdmi {
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
@@ -73,7 +74,7 @@
 			status = "disabled";
 		};
 
-		simplefb_lcd: framebuffer@1 {
+		simplefb_lcd: framebuffer-lcd0 {
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
@@ -105,39 +106,63 @@
 			reg = <0>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				1008000	1200000
-				864000	1200000
-				720000	1100000
-				480000	1000000
-				>;
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
 			#cooling-cells = <2>;
-			cooling-min-level = <0>;
-			cooling-max-level = <3>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <1>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points =
+				/* kHz	  uV */
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <2>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points =
+				/* kHz	  uV */
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <3>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points =
+				/* kHz	  uV */
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
+			#cooling-cells = <2>;
 		};
 	};
 
 	thermal-zones {
-		cpu_thermal {
+		cpu-thermal {
 			/* milliseconds */
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
@@ -146,19 +171,22 @@
 			cooling-maps {
 				map0 {
 					trip = <&cpu_alert0>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <70000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit: cpu_crit {
+				cpu_crit: cpu-crit {
 					/* milliCelsius */
 					temperature = <100000>;
 					hysteresis = <2000>;
@@ -168,12 +196,8 @@
 		};
 	};
 
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
 	pmu {
-		compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
+		compatible = "arm,cortex-a7-pmu";
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
@@ -185,17 +209,20 @@
 		#size-cells = <1>;
 		ranges;
 
-		osc24M: osc24M {
+		osc24M: clk-24M {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
 		};
 
-		osc32k: clk@0 {
+		osc32k: clk-32k {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
-			clock-output-names = "osc32k";
+			clock-accuracy = <50000>;
+			clock-output-names = "ext_osc32k";
 		};
 
 		/*
@@ -207,21 +234,21 @@
 		 * The actual TX clock rate is not controlled by the
 		 * gmac_tx clock.
 		 */
-		mii_phy_tx_clk: clk@1 {
+		mii_phy_tx_clk: clk-mii-phy-tx {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <25000000>;
 			clock-output-names = "mii_phy_tx";
 		};
 
-		gmac_int_tx_clk: clk@2 {
+		gmac_int_tx_clk: clk-gmac-int-tx {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <125000000>;
 			clock-output-names = "gmac_int_tx";
 		};
 
-		gmac_tx_clk: clk@01c200d0 {
+		gmac_tx_clk: clk@1c200d0 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun7i-a20-gmac-clk";
 			reg = <0x01c200d0 0x4>;
@@ -236,13 +263,13 @@
 		status = "disabled";
 	};
 
-	soc@01c00000 {
+	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 
-		dma: dma-controller@01c02000 {
+		dma: dma-controller@1c02000 {
 			compatible = "allwinner,sun6i-a31-dma";
 			reg = <0x01c02000 0x1000>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
@@ -251,19 +278,25 @@
 			#dma-cells = <1>;
 		};
 
-		tcon0: lcd-controller@01c0c000 {
+		tcon0: lcd-controller@1c0c000 {
 			compatible = "allwinner,sun6i-a31-tcon";
 			reg = <0x01c0c000 0x1000>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&ccu RST_AHB1_LCD0>;
-			reset-names = "lcd";
+			dmas = <&dma 11>;
+			resets = <&ccu RST_AHB1_LCD0>,
+				 <&ccu RST_AHB1_LVDS>;
+			reset-names = "lcd",
+				      "lvds";
 			clocks = <&ccu CLK_AHB1_LCD0>,
 				 <&ccu CLK_LCD0_CH0>,
-				 <&ccu CLK_LCD0_CH1>;
+				 <&ccu CLK_LCD0_CH1>,
+				 <&ccu 15>;
 			clock-names = "ahb",
 				      "tcon-ch0",
-				      "tcon-ch1";
+				      "tcon-ch1",
+				      "lvds-alt";
 			clock-output-names = "tcon0-pixel-clock";
+			#clock-cells = <0>;
 
 			ports {
 				#address-cells = <1>;
@@ -278,29 +311,45 @@
 						reg = <0>;
 						remote-endpoint = <&drc0_out_tcon0>;
 					};
+
+					tcon0_in_drc1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&drc1_out_tcon0>;
+					};
 				};
 
 				tcon0_out: port@1 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <1>;
+
+					tcon0_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
 				};
 			};
 		};
 
-		tcon1: lcd-controller@01c0d000 {
+		tcon1: lcd-controller@1c0d000 {
 			compatible = "allwinner,sun6i-a31-tcon";
 			reg = <0x01c0d000 0x1000>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&ccu RST_AHB1_LCD1>;
-			reset-names = "lcd";
+			dmas = <&dma 12>;
+			resets = <&ccu RST_AHB1_LCD1>,
+				 <&ccu RST_AHB1_LVDS>;
+			reset-names = "lcd", "lvds";
 			clocks = <&ccu CLK_AHB1_LCD1>,
 				 <&ccu CLK_LCD1_CH0>,
-				 <&ccu CLK_LCD1_CH1>;
+				 <&ccu CLK_LCD1_CH1>,
+				 <&ccu 15>;
 			clock-names = "ahb",
 				      "tcon-ch0",
-				      "tcon-ch1";
+				      "tcon-ch1",
+				      "lvds-alt";
 			clock-output-names = "tcon1-pixel-clock";
+			#clock-cells = <0>;
 
 			ports {
 				#address-cells = <1>;
@@ -311,8 +360,13 @@
 					#size-cells = <0>;
 					reg = <0>;
 
-					tcon1_in_drc1: endpoint@0 {
+					tcon1_in_drc0: endpoint@0 {
 						reg = <0>;
+						remote-endpoint = <&drc0_out_tcon1>;
+					};
+
+					tcon1_in_drc1: endpoint@1 {
+						reg = <1>;
 						remote-endpoint = <&drc1_out_tcon1>;
 					};
 				};
@@ -321,11 +375,17 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <1>;
+
+					tcon1_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon1>;
+						allwinner,tcon-channel = <1>;
+					};
 				};
 			};
 		};
 
-		mmc0: mmc@01c0f000 {
+		mmc0: mmc@1c0f000 {
 			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c0f000 0x1000>;
 			clocks = <&ccu CLK_AHB1_MMC0>,
@@ -339,12 +399,14 @@
 			resets = <&ccu RST_AHB1_MMC0>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
-		mmc1: mmc@01c10000 {
+		mmc1: mmc@1c10000 {
 			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c10000 0x1000>;
 			clocks = <&ccu CLK_AHB1_MMC1>,
@@ -358,12 +420,14 @@
 			resets = <&ccu RST_AHB1_MMC1>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
-		mmc2: mmc@01c11000 {
+		mmc2: mmc@1c11000 {
 			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c11000 0x1000>;
 			clocks = <&ccu CLK_AHB1_MMC2>,
@@ -382,7 +446,7 @@
 			#size-cells = <0>;
 		};
 
-		mmc3: mmc@01c12000 {
+		mmc3: mmc@1c12000 {
 			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c12000 0x1000>;
 			clocks = <&ccu CLK_AHB1_MMC3>,
@@ -401,7 +465,47 @@
 			#size-cells = <0>;
 		};
 
-		usb_otg: usb@01c19000 {
+		hdmi: hdmi@1c16000 {
+			compatible = "allwinner,sun6i-a31-hdmi";
+			reg = <0x01c16000 0x1000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_HDMI>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_PLL_VIDEO0_2X>,
+				 <&ccu CLK_PLL_VIDEO1_2X>;
+			clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1";
+			resets = <&ccu RST_AHB1_HDMI>;
+			dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+			dmas = <&dma 13>, <&dma 13>, <&dma 14>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+
+					hdmi_in_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		usb_otg: usb@1c19000 {
 			compatible = "allwinner,sun6i-a31-musb";
 			reg = <0x01c19000 0x0400>;
 			clocks = <&ccu CLK_AHB1_OTG>;
@@ -411,10 +515,11 @@
 			phys = <&usbphy 0>;
 			phy-names = "usb";
 			extcon = <&usbphy 0>;
+			dr_mode = "otg";
 			status = "disabled";
 		};
 
-		usbphy: phy@01c19400 {
+		usbphy: phy@1c19400 {
 			compatible = "allwinner,sun6i-a31-usb-phy";
 			reg = <0x01c19400 0x10>,
 			      <0x01c1a800 0x4>,
@@ -438,7 +543,7 @@
 			#phy-cells = <1>;
 		};
 
-		ehci0: usb@01c1a000 {
+		ehci0: usb@1c1a000 {
 			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
 			reg = <0x01c1a000 0x100>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
@@ -449,7 +554,7 @@
 			status = "disabled";
 		};
 
-		ohci0: usb@01c1a400 {
+		ohci0: usb@1c1a400 {
 			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
 			reg = <0x01c1a400 0x100>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
@@ -460,7 +565,7 @@
 			status = "disabled";
 		};
 
-		ehci1: usb@01c1b000 {
+		ehci1: usb@1c1b000 {
 			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
 			reg = <0x01c1b000 0x100>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
@@ -471,7 +576,7 @@
 			status = "disabled";
 		};
 
-		ohci1: usb@01c1b400 {
+		ohci1: usb@1c1b400 {
 			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
 			reg = <0x01c1b400 0x100>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -482,7 +587,7 @@
 			status = "disabled";
 		};
 
-		ohci2: usb@01c1c400 {
+		ohci2: usb@1c1c400 {
 			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
 			reg = <0x01c1c400 0x100>;
 			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -491,30 +596,32 @@
 			status = "disabled";
 		};
 
-		ccu: clock@01c20000 {
+		ccu: clock@1c20000 {
 			compatible = "allwinner,sun6i-a31-ccu";
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&osc32k>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
 
-		pio: pinctrl@01c20800 {
+		pio: pinctrl@1c20800 {
 			compatible = "allwinner,sun6i-a31-pinctrl";
 			reg = <0x01c20800 0x400>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&osc32k>;
+			clocks = <&ccu CLK_APB1_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
-			gmac_pins_gmii_a: gmac_gmii@0 {
+			gmac_gmii_pins: gmac-gmii-pins {
 				pins = "PA0", "PA1", "PA2", "PA3",
 						"PA4", "PA5", "PA6", "PA7",
 						"PA8", "PA9", "PA10", "PA11",
@@ -530,7 +637,7 @@
 				drive-strength = <30>;
 			};
 
-			gmac_pins_mii_a: gmac_mii@0 {
+			gmac_mii_pins: gmac-mii-pins {
 				pins = "PA0", "PA1", "PA2", "PA3",
 						"PA8", "PA9", "PA11",
 						"PA12", "PA13", "PA14", "PA19",
@@ -539,7 +646,7 @@
 				function = "gmac";
 			};
 
-			gmac_pins_rgmii_a: gmac_rgmii@0 {
+			gmac_rgmii_pins: gmac-rgmii-pins {
 				pins = "PA0", "PA1", "PA2", "PA3",
 						"PA9", "PA10", "PA11",
 						"PA12", "PA13", "PA14", "PA19",
@@ -552,22 +659,22 @@
 				drive-strength = <40>;
 			};
 
-			i2c0_pins_a: i2c0@0 {
+			i2c0_pins: i2c0-pins {
 				pins = "PH14", "PH15";
 				function = "i2c0";
 			};
 
-			i2c1_pins_a: i2c1@0 {
+			i2c1_pins: i2c1-pins {
 				pins = "PH16", "PH17";
 				function = "i2c1";
 			};
 
-			i2c2_pins_a: i2c2@0 {
+			i2c2_pins: i2c2-pins {
 				pins = "PH18", "PH19";
 				function = "i2c2";
 			};
 
-			lcd0_rgb888_pins: lcd0_rgb888 {
+			lcd0_rgb888_pins: lcd0-rgb888-pins {
 				pins = "PD0", "PD1", "PD2", "PD3",
 						 "PD4", "PD5", "PD6", "PD7",
 						 "PD8", "PD9", "PD10", "PD11",
@@ -578,7 +685,7 @@
 				function = "lcd0";
 			};
 
-			mmc0_pins_a: mmc0@0 {
+			mmc0_pins: mmc0-pins {
 				pins = "PF0", "PF1", "PF2",
 						 "PF3", "PF4", "PF5";
 				function = "mmc0";
@@ -586,7 +693,7 @@
 				bias-pull-up;
 			};
 
-			mmc1_pins_a: mmc1@0 {
+			mmc1_pins: mmc1-pins {
 				pins = "PG0", "PG1", "PG2", "PG3",
 						 "PG4", "PG5";
 				function = "mmc1";
@@ -594,7 +701,7 @@
 				bias-pull-up;
 			};
 
-			mmc2_pins_a: mmc2@0 {
+			mmc2_4bit_pins: mmc2-4bit-pins {
 				pins = "PC6", "PC7", "PC8", "PC9",
 						 "PC10", "PC11";
 				function = "mmc2";
@@ -602,7 +709,7 @@
 				bias-pull-up;
 			};
 
-			mmc2_8bit_emmc_pins: mmc2@1 {
+			mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins {
 				pins = "PC6", "PC7", "PC8", "PC9",
 						 "PC10", "PC11", "PC12",
 						 "PC13", "PC14", "PC15",
@@ -612,7 +719,7 @@
 				bias-pull-up;
 			};
 
-			mmc3_8bit_emmc_pins: mmc3@1 {
+			mmc3_8bit_emmc_pins: mmc3-8bit-emmc-pins {
 				pins = "PC6", "PC7", "PC8", "PC9",
 						 "PC10", "PC11", "PC12",
 						 "PC13", "PC14", "PC15",
@@ -622,34 +729,37 @@
 				bias-pull-up;
 			};
 
-			spdif_pins_a: spdif@0 {
+			spdif_tx_pin: spdif-tx-pin {
 				pins = "PH28";
 				function = "spdif";
 			};
 
-			uart0_pins_a: uart0@0 {
+			uart0_ph_pins: uart0-ph-pins {
 				pins = "PH20", "PH21";
 				function = "uart0";
 			};
 		};
 
-		timer@01c20c00 {
+		timer@1c20c00 {
 			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0xa0>;
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&osc24M>;
 		};
 
-		wdt1: watchdog@01c20ca0 {
+		wdt1: watchdog@1c20ca0 {
 			compatible = "allwinner,sun6i-a31-wdt";
 			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
 		};
 
-		spdif: spdif@01c21000 {
+		spdif: spdif@1c21000 {
 			#sound-dai-cells = <0>;
 			compatible = "allwinner,sun6i-a31-spdif";
 			reg = <0x01c21000 0x400>;
@@ -662,21 +772,48 @@
 			status = "disabled";
 		};
 
-		lradc: lradc@01c22800 {
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_DAUDIO0>, <&ccu CLK_DAUDIO0>;
+			resets = <&ccu RST_APB1_DAUDIO0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 3>, <&dma 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_DAUDIO1>, <&ccu CLK_DAUDIO1>;
+			resets = <&ccu RST_APB1_DAUDIO1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 4>, <&dma 4>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
 			compatible = "allwinner,sun4i-a10-lradc-keys";
 			reg = <0x01c22800 0x100>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
-		rtp: rtp@01c25000 {
+		rtp: rtp@1c25000 {
 			compatible = "allwinner,sun6i-a31-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			#thermal-sensor-cells = <0>;
 		};
 
-		uart0: serial@01c28000 {
+		uart0: serial@1c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
@@ -685,11 +822,11 @@
 			clocks = <&ccu CLK_APB2_UART0>;
 			resets = <&ccu RST_APB2_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
-		uart1: serial@01c28400 {
+		uart1: serial@1c28400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28400 0x400>;
 			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
@@ -698,11 +835,11 @@
 			clocks = <&ccu CLK_APB2_UART1>;
 			resets = <&ccu RST_APB2_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
-		uart2: serial@01c28800 {
+		uart2: serial@1c28800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28800 0x400>;
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -711,11 +848,11 @@
 			clocks = <&ccu CLK_APB2_UART2>;
 			resets = <&ccu RST_APB2_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
-		uart3: serial@01c28c00 {
+		uart3: serial@1c28c00 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28c00 0x400>;
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
@@ -724,11 +861,11 @@
 			clocks = <&ccu CLK_APB2_UART3>;
 			resets = <&ccu RST_APB2_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
-		uart4: serial@01c29000 {
+		uart4: serial@1c29000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29000 0x400>;
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
@@ -737,11 +874,11 @@
 			clocks = <&ccu CLK_APB2_UART4>;
 			resets = <&ccu RST_APB2_UART4>;
 			dmas = <&dma 10>, <&dma 10>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
-		uart5: serial@01c29400 {
+		uart5: serial@1c29400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29400 0x400>;
 			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
@@ -750,44 +887,50 @@
 			clocks = <&ccu CLK_APB2_UART5>;
 			resets = <&ccu RST_APB2_UART5>;
 			dmas = <&dma 22>, <&dma 22>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
-		i2c0: i2c@01c2ac00 {
+		i2c0: i2c@1c2ac00 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_APB2_I2C0>;
 			resets = <&ccu RST_APB2_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
-		i2c1: i2c@01c2b000 {
+		i2c1: i2c@1c2b000 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_APB2_I2C1>;
 			resets = <&ccu RST_APB2_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
-		i2c2: i2c@01c2b400 {
+		i2c2: i2c@1c2b400 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_APB2_I2C2>;
 			resets = <&ccu RST_APB2_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
-		i2c3: i2c@01c2b800 {
+		i2c3: i2c@1c2b800 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b800 0x400>;
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -798,7 +941,7 @@
 			#size-cells = <0>;
 		};
 
-		gmac: ethernet@01c30000 {
+		gmac: ethernet@1c30000 {
 			compatible = "allwinner,sun7i-a20-gmac";
 			reg = <0x01c30000 0x1054>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -811,11 +954,15 @@
 			snps,fixed-burst;
 			snps,force_sf_dma_mode;
 			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
-		crypto: crypto-engine@01c15000 {
+		crypto: crypto-engine@1c15000 {
 			compatible = "allwinner,sun6i-a31-crypto",
 				     "allwinner,sun4i-a10-crypto";
 			reg = <0x01c15000 0x1000>;
@@ -826,7 +973,7 @@
 			reset-names = "ahb";
 		};
 
-		codec: codec@01c22c00 {
+		codec: codec@1c22c00 {
 			#sound-dai-cells = <0>;
 			compatible = "allwinner,sun6i-a31-codec";
 			reg = <0x01c22c00 0x400>;
@@ -839,7 +986,7 @@
 			status = "disabled";
 		};
 
-		timer@01c60000 {
+		timer@1c60000 {
 			compatible = "allwinner,sun6i-a31-hstimer",
 				     "allwinner,sun7i-a20-hstimer";
 			reg = <0x01c60000 0x1000>;
@@ -851,7 +998,7 @@
 			resets = <&ccu RST_AHB1_HSTIMER>;
 		};
 
-		spi0: spi@01c68000 {
+		spi0: spi@1c68000 {
 			compatible = "allwinner,sun6i-a31-spi";
 			reg = <0x01c68000 0x1000>;
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
@@ -861,9 +1008,11 @@
 			dma-names = "rx", "tx";
 			resets = <&ccu RST_AHB1_SPI0>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
-		spi1: spi@01c69000 {
+		spi1: spi@1c69000 {
 			compatible = "allwinner,sun6i-a31-spi";
 			reg = <0x01c69000 0x1000>;
 			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
@@ -873,9 +1022,11 @@
 			dma-names = "rx", "tx";
 			resets = <&ccu RST_AHB1_SPI1>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
-		spi2: spi@01c6a000 {
+		spi2: spi@1c6a000 {
 			compatible = "allwinner,sun6i-a31-spi";
 			reg = <0x01c6a000 0x1000>;
 			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
@@ -885,9 +1036,11 @@
 			dma-names = "rx", "tx";
 			resets = <&ccu RST_AHB1_SPI2>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
-		spi3: spi@01c6b000 {
+		spi3: spi@1c6b000 {
 			compatible = "allwinner,sun6i-a31-spi";
 			reg = <0x01c6b000 0x1000>;
 			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
@@ -897,10 +1050,12 @@
 			dma-names = "rx", "tx";
 			resets = <&ccu RST_AHB1_SPI3>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
-		gic: interrupt-controller@01c81000 {
-			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
 			reg = <0x01c81000 0x1000>,
 			      <0x01c82000 0x2000>,
 			      <0x01c84000 0x2000>,
@@ -910,7 +1065,7 @@
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
-		fe0: display-frontend@01e00000 {
+		fe0: display-frontend@1e00000 {
 			compatible = "allwinner,sun6i-a31-display-frontend";
 			reg = <0x01e00000 0x20000>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
@@ -942,7 +1097,7 @@
 			};
 		};
 
-		fe1: display-frontend@01e20000 {
+		fe1: display-frontend@1e20000 {
 			compatible = "allwinner,sun6i-a31-display-frontend";
 			reg = <0x01e20000 0x20000>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
@@ -974,7 +1129,7 @@
 			};
 		};
 
-		be1: display-backend@01e40000 {
+		be1: display-backend@1e40000 {
 			compatible = "allwinner,sun6i-a31-display-backend";
 			reg = <0x01e40000 0x10000>;
 			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
@@ -984,9 +1139,6 @@
 				      "ram";
 			resets = <&ccu RST_AHB1_BE1>;
 
-			assigned-clocks = <&ccu CLK_BE1>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1012,15 +1164,15 @@
 					#size-cells = <0>;
 					reg = <1>;
 
-					be1_out_drc1: endpoint@0 {
-						reg = <0>;
+					be1_out_drc1: endpoint@1 {
+						reg = <1>;
 						remote-endpoint = <&drc1_in_be1>;
 					};
 				};
 			};
 		};
 
-		drc1: drc@01e50000 {
+		drc1: drc@1e50000 {
 			compatible = "allwinner,sun6i-a31-drc";
 			reg = <0x01e50000 0x10000>;
 			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
@@ -1030,9 +1182,6 @@
 				      "ram";
 			resets = <&ccu RST_AHB1_DRC1>;
 
-			assigned-clocks = <&ccu CLK_IEP_DRC1>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1042,8 +1191,8 @@
 					#size-cells = <0>;
 					reg = <0>;
 
-					drc1_in_be1: endpoint@0 {
-						reg = <0>;
+					drc1_in_be1: endpoint@1 {
+						reg = <1>;
 						remote-endpoint = <&be1_out_drc1>;
 					};
 				};
@@ -1053,15 +1202,20 @@
 					#size-cells = <0>;
 					reg = <1>;
 
-					drc1_out_tcon1: endpoint@0 {
+					drc1_out_tcon0: endpoint@0 {
 						reg = <0>;
+						remote-endpoint = <&tcon0_in_drc1>;
+					};
+
+					drc1_out_tcon1: endpoint@1 {
+						reg = <1>;
 						remote-endpoint = <&tcon1_in_drc1>;
 					};
 				};
 			};
 		};
 
-		be0: display-backend@01e60000 {
+		be0: display-backend@1e60000 {
 			compatible = "allwinner,sun6i-a31-display-backend";
 			reg = <0x01e60000 0x10000>;
 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
@@ -1071,9 +1225,6 @@
 				      "ram";
 			resets = <&ccu RST_AHB1_BE0>;
 
-			assigned-clocks = <&ccu CLK_BE0>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1095,19 +1246,16 @@
 				};
 
 				be0_out: port@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
 					reg = <1>;
 
-					be0_out_drc0: endpoint@0 {
-						reg = <0>;
+					be0_out_drc0: endpoint {
 						remote-endpoint = <&drc0_in_be0>;
 					};
 				};
 			};
 		};
 
-		drc0: drc@01e70000 {
+		drc0: drc@1e70000 {
 			compatible = "allwinner,sun6i-a31-drc";
 			reg = <0x01e70000 0x10000>;
 			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
@@ -1117,20 +1265,14 @@
 				      "ram";
 			resets = <&ccu RST_AHB1_DRC0>;
 
-			assigned-clocks = <&ccu CLK_IEP_DRC0>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
 				drc0_in: port@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
 					reg = <0>;
 
-					drc0_in_be0: endpoint@0 {
-						reg = <0>;
+					drc0_in_be0: endpoint {
 						remote-endpoint = <&be0_out_drc0>;
 					};
 				};
@@ -1144,39 +1286,48 @@
 						reg = <0>;
 						remote-endpoint = <&tcon0_in_drc0>;
 					};
+
+					drc0_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_drc0>;
+					};
 				};
 			};
 		};
 
-		rtc: rtc@01f00000 {
+		rtc: rtc@1f00000 {
+			#clock-cells = <1>;
 			compatible = "allwinner,sun6i-a31-rtc";
 			reg = <0x01f00000 0x54>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc32k>;
+			clock-output-names = "osc32k";
 		};
 
-		nmi_intc: interrupt-controller@01f00c0c {
-			compatible = "allwinner,sun6i-a31-sc-nmi";
+		r_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun6i-a31-r-intc";
 			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x01f00c0c 0x38>;
+			#interrupt-cells = <3>;
+			reg = <0x01f00c00 0x400>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		prcm@01f01400 {
+		prcm@1f01400 {
 			compatible = "allwinner,sun6i-a31-prcm";
 			reg = <0x01f01400 0x200>;
 
-			ar100: ar100_clk {
+			ar100: ar100-clk {
 				compatible = "allwinner,sun6i-a31-ar100-clk";
 				#clock-cells = <0>;
-				clocks = <&osc32k>, <&osc24M>,
+				clocks = <&rtc CLK_OSC32K>, <&osc24M>,
 					 <&ccu CLK_PLL_PERIPH>,
 					 <&ccu CLK_PLL_PERIPH>;
 				clock-output-names = "ar100";
 			};
 
-			ahb0: ahb0_clk {
+			ahb0: ahb0-clk {
 				compatible = "fixed-factor-clock";
 				#clock-cells = <0>;
 				clock-div = <1>;
@@ -1185,14 +1336,14 @@
 				clock-output-names = "ahb0";
 			};
 
-			apb0: apb0_clk {
+			apb0: apb0-clk {
 				compatible = "allwinner,sun6i-a31-apb0-clk";
 				#clock-cells = <0>;
 				clocks = <&ahb0>;
 				clock-output-names = "apb0";
 			};
 
-			apb0_gates: apb0_gates_clk {
+			apb0_gates: apb0-gates-clk {
 				compatible = "allwinner,sun6i-a31-apb0-gates-clk";
 				#clock-cells = <1>;
 				clocks = <&apb0>;
@@ -1202,26 +1353,26 @@
 						"apb0_i2c";
 			};
 
-			ir_clk: ir_clk {
+			ir_clk: ir-clk {
 				#clock-cells = <0>;
 				compatible = "allwinner,sun4i-a10-mod0-clk";
-				clocks = <&osc32k>, <&osc24M>;
+				clocks = <&rtc CLK_OSC32K>, <&osc24M>;
 				clock-output-names = "ir";
 			};
 
-			apb0_rst: apb0_rst {
+			apb0_rst: apb0-rst {
 				compatible = "allwinner,sun6i-a31-clock-reset";
 				#reset-cells = <1>;
 			};
 		};
 
-		cpucfg@01f01c00 {
+		cpucfg@1f01c00 {
 			compatible = "allwinner,sun6i-a31-cpuconfig";
 			reg = <0x01f01c00 0x300>;
 		};
 
-		ir: ir@01f02000 {
-			compatible = "allwinner,sun5i-a13-ir";
+		ir: ir@1f02000 {
+			compatible = "allwinner,sun6i-a31-ir";
 			clocks = <&apb0_gates 1>, <&ir_clk>;
 			clock-names = "apb", "ir";
 			resets = <&apb0_rst 1>;
@@ -1230,32 +1381,31 @@
 			status = "disabled";
 		};
 
-		r_pio: pinctrl@01f02c00 {
+		r_pio: pinctrl@1f02c00 {
 			compatible = "allwinner,sun6i-a31-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
-			resets = <&apb0_rst 0>;
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
-			#size-cells = <0>;
 			#gpio-cells = <3>;
 
-			ir_pins_a: ir@0 {
+			s_ir_rx_pin: s-ir-rx-pin {
 				pins = "PL4";
 				function = "s_ir";
 			};
 
-			p2wi_pins: p2wi {
+			s_p2wi_pins: s-p2wi-pins {
 				pins = "PL0", "PL1";
 				function = "s_p2wi";
 			};
 		};
 
-		p2wi: i2c@01f03400 {
+		p2wi: i2c@1f03400 {
 			compatible = "allwinner,sun6i-a31-p2wi";
 			reg = <0x01f03400 0x400>;
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
@@ -1263,7 +1413,7 @@
 			clock-frequency = <100000>;
 			resets = <&apb0_rst 3>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&p2wi_pins>;
+			pinctrl-0 = <&s_p2wi_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-colorfly-e708-q1.dts
index 882a4d89fa22..a2ef7846e2c8 100644
--- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-colorfly-e708-q1.dts
@@ -53,7 +53,7 @@
 	vref-supply = <&reg_aldo3>;
 	status = "okay";
 
-	button@1000 {
+	button-1000 {
 		label = "Home";
 		linux,code = <KEY_HOMEPAGE>;
 		channel = <0>;
diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-cs908.dts
index 75e578159c3a..1d15e15011c6 100644
--- a/arch/arm/boot/dts/sun6i-a31s-cs908.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-cs908.dts
@@ -66,28 +66,31 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_mii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &ir {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir_pins_a>;
+	pinctrl-0 = <&s_ir_rx_pin>;
 	status = "okay";
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &ohci1 {
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-inet-q972.dts
index e584e6b186a7..c5e2c55cdc63 100644
--- a/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-inet-q972.dts
@@ -54,8 +54,6 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
 	ft5406ee8: touchscreen@38 {
@@ -73,21 +71,21 @@
 	vref-supply = <&reg_aldo3>;
 	status = "okay";
 
-	button@200 {
+	button-200 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
 		voltage = <200000>;
 	};
 
-	button@900 {
+	button-900 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <900000>;
 	};
 
-	button@1200 {
+	button-1200 {
 		label = "Back";
 		linux,code = <KEY_BACK>;
 		channel = <0>;
diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-primo81.dts
index 4c10123509c4..b32b70ada7fd 100644
--- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-primo81.dts
@@ -52,32 +52,51 @@
 / {
 	model = "MSI Primo81 tablet";
 	compatible = "msi,primo81", "allwinner,sun6i-a31s";
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
 };
 
 &cpu0 {
 	cpu-supply = <&reg_dcdc3>;
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	/* rtl8188etv wifi is connected here */
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c0 {
 	/* pull-ups and device VDDIO use AXP221 DLDO3 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "failed";
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
 	ctp@5d {
-		pinctrl-names = "default";
-		pinctrl-0 = <&gt911_int_primo81>;
 		compatible = "goodix,gt911";
 		reg = <0x5d>;
 		interrupt-parent = <&pio>;
@@ -87,8 +106,6 @@
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 
 	accelerometer@1c {
@@ -98,7 +115,6 @@
 		reg = <0x1c>;
 		interrupt-parent = <&pio>;
 		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */
-		#io-channel-cells = <1>;
 	};
 };
 
@@ -106,14 +122,14 @@
 	vref-supply = <&reg_aldo3>;
 	status = "okay";
 
-	button@158 {
+	button-158 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <158730>;
 	};
 
-	button@349 {
+	button-349 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
@@ -122,32 +138,18 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
-	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
-	cd-inverted;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
 	status = "okay";
 };
 
 &pio {
-	gt911_int_primo81: gt911_int_pin@0 {
-		pins = "PA3";
-		function = "gpio_in";
-	};
-
-	mma8452_int_primo81: mma8452_int_pin@0 {
+	mma8452_int_primo81: mma8452-int-pin {
 		pins = "PA9";
 		function = "gpio_in";
 		bias-pull-up;
 	};
-
-	mmc0_cd_pin_primo81: mmc0_cd_pin@0 {
-		pins = "PA8";
-		function = "gpio_in";
-		bias-pull-up;
-	};
 };
 
 &p2wi {
@@ -156,8 +158,8 @@
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		x-powers,drive-vbus-en;
 	};
 };
@@ -257,7 +259,7 @@
 };
 
 &usbphy {
-	usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+	usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_drivevbus>;
 	usb1_vbus-supply = <&reg_dldo1>;
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s-core.dtsi
index d7325bc4eeb4..227ad489731c 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s-core.dtsi
@@ -78,8 +78,8 @@
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -135,7 +135,7 @@
 /* UART0 pads available on core board */
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s.dts
index b3d98222bd81..56956352914d 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s.dts
@@ -53,12 +53,21 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_sina31s>;
 
-		status {
+		led-0 {
 			label = "sina31s:status:usr";
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
 		};
@@ -90,6 +99,10 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	/* USB 2.0 4 port hub IC */
 	status = "okay";
@@ -101,20 +114,26 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_mii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	phy-supply = <&reg_dldo1>;
 	status = "okay";
+};
 
-	phy1: ethernet-phy@1 {
-		reg = <1>;
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
 	};
 };
 
 &ir {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir_pins_a>;
+	pinctrl-0 = <&s_ir_rx_pin>;
 	status = "okay";
 };
 
@@ -122,14 +141,14 @@
 	vref-supply = <&reg_aldo3>;
 	status = "okay";
 
-	button@158 {
+	button-158 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <158730>;
 	};
 
-	button@349 {
+	button-349 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
@@ -137,13 +156,16 @@
 	};
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
-	cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */
-	cd-inverted;
+	cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
 	status = "okay";
 };
 
@@ -151,19 +173,6 @@
 	status = "okay";
 };
 
-&pio {
-	led_pin_sina31s: led_pin@0 {
-		pins = "PH13";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin_sina31s: mmc0_cd_pin@0 {
-		pins = "PA4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &reg_dldo1 {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
@@ -172,7 +181,7 @@
 
 &spdif {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spdif_pins_a>;
+	pinctrl-0 = <&spdif_tx_pin>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts
new file mode 100644
index 000000000000..f63d67ec9887
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -0,0 +1,334 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Sinovoip BPI-M2";
+	compatible = "sinovoip,bpi-m2", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bpi-m2:blue:usr";
+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		};
+
+		led-1 {
+			label = "bpi-m2:green:usr";
+			gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
+		};
+
+		led-2 {
+			label = "bpi-m2:red:usr";
+			gpios = <&pio 6 5 GPIO_ACTIVE_HIGH>; /* PG5 */
+		};
+	};
+
+	mmc2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>; /* PA21 */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pins>;
+	vmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-gmac";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vdd-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-mac";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pb";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vdd-csi";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pm-cpus";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&pio {
+	gpio-line-names =
+		/* PA */
+		"ETXD0", "ETXD1", "ETXD2", "ETXD3", "SDC0-DET", "", "",
+		"", "ETXCLK", "ETXEN", "EGTXCLK", "ERXD0", "ERXD1",
+		"ERXD2", "ERXD3", "", "", "", "", "ERXDV", "ERXCK",
+		"ETXERR", "ERXERR", "ECOL", "ECRS", "ECLKIN", "EMDC",
+		"EMDIO", "", "", "", "",
+
+		/* PB */
+		"CN7-P29", "CN7-P31", "CN7-P33", "CN7-P35", "CN7-P37",
+		"CN7-P28", "CN7-P27", "CN7-P32", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "",
+
+		/* PC */
+		"", "", "", "", "", "", "WL-SDIO-CMD", "WL-SDIO-CLK",
+		"WL-SDIO-D0", "WL-SDIO-D2", "WL-SDIO-D2", "WL-SDIO-D3",
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "",
+		"", "USB-DRV", "", "", "", "",
+
+		/* PD */
+		"CN9-P09", "CN9-P11", "CN9-P13", "CN9-P15", "CN9-P17",
+		"CN9-P19", "CN9-P21", "CN9-P23", "CN9-P25", "CN9-P27",
+		"CN9-P29", "CN9-P31", "CN9-P33", "CN9-P35", "CN9-P37",
+		"CN9-P39", "CN9-P40", "CN9-P38", "CN9-P36", "CN9-P34",
+		"CN9-P32", "CN9-P30", "CN9-P28", "CN9-P26", "CN9-P22",
+		"CN9-P14", "CN9-P18", "CN9-P16", "", "", "", "",
+
+		/* PE */
+		"CN6-P20", "CN6-P24", "CN6-P30", "CN6-P28", "CN7-P08",
+		"CN7-P10", "CN7-P36", "CN7-P38", "CN6-P17", "CN6-P19",
+		"CN6-P21", "CN6-P23", "CN6-P25", "CN6-P27", "CN6-P29",
+		"CN6-P31", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "",
+
+		/* PF */
+		"SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3",
+		"SDC0-D2", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "",
+		"",
+
+		/* PG */
+		"CN9-P06", "CN9-P08", "CN9-P20", "CN9-P12", "CN9-P07",
+		"LED-PWR", "CN7-P13", "CN7-P11", "CN7-P22", "CN7-P15",
+		"LED-G", "LED-B", "CN7-P26", "CN7-P24", "CN7-P23",
+		"CN7-P19", "CN7-P21", "HCEC", "CN6-P22", "", "", "", "",
+		"", "", "", "", "", "", "", "", "",
+
+		/* PH */
+		"", "", "", "", "", "", "", "", "", "CN7-P07",
+		"CN7-P12", "CN7-P16", "CN7-P18", "CN9-P10", "CN6-P16",
+		"CN6-P14", "CN9-P04", "CN9-P02", "CN7-P05", "CN7-P03",
+		"CN8-P03", "CN8-P02", "", "", "CN6-P34", "CN6-P32",
+		"CN6-P26", "CN6-P18", "", "", "", "";
+};
+
+&r_pio {
+	gpio-line-names =
+		/* PL */
+		"PMU-SCK", "PMU-SDA", "VBAT-EN", "", "IR-RX",
+		"WL-WAKE-HOST", "BT-WAKE_HOST", "BT-ENABLE",
+		"WL-PMU-EN", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "",
+
+		/* PM */
+		"CN6-P12", "CN6-P35", "CN7-P40", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-yones-toptech-bs1078-v2.dts
index f3edf9ca435c..0b61f5368d44 100644
--- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-yones-toptech-bs1078-v2.dts
@@ -62,14 +62,10 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };
 
@@ -89,36 +85,21 @@
 	status = "okay";
 };
 
-&pio {
-	mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 {
-		pins = "PA8";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>;
 	vmmc-supply = <&reg_vcc3v0>;
 	bus-width = <4>;
-	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
-	cd-inverted;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
 	status = "okay";
 };
 
-&mmc0_pins_a {
-	bias-pull-up;
-};
-
 &p2wi {
 	status = "okay";
 
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -190,7 +171,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun6i-a31s.dtsi b/arch/arm/boot/dts/allwinner/sun6i-a31s.dtsi
index 97e2c51d0aea..97e2c51d0aea 100644
--- a/arch/arm/boot/dts/sun6i-a31s.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s.dtsi
diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/allwinner/sun6i-reference-design-tablet.dtsi
index 3cc4046b904a..f38d19c6be8c 100644
--- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun6i-reference-design-tablet.dtsi
@@ -66,36 +66,21 @@
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
-	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
-	cd-inverted;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
 	status = "okay";
 };
 
-&pio {
-	mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
-		pins = "PA8";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PA15";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &p2wi {
 	status = "okay";
 
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		drivevbus-supply = <&reg_vcc5v0>;
 		x-powers,drive-vbus-en;
 	};
@@ -180,9 +165,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+	usb0_id_det-gpios = <&pio 0 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA15 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_drivevbus>;
 	usb1_vbus-supply = <&reg_dldo1>;
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi-m1-plus.dts
index eb55e74232c9..f2d7fab9978d 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi-m1-plus.dts
@@ -60,34 +60,39 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_bpi_m1p>;
 
-		green {
+		led-0 {
 			label = "bananapi-m1-plus:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-1 {
 			label = "bananapi-m1-plus:pwr:usr";
 			gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
-	mmc3_pwrseq: mmc3_pwrseq {
+	mmc3_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&mmc3_pwrseq_pin_bpi_m1p>;
 		reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */
 	};
 
 	reg_gmac_3v3: gmac-3v3 {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gmac_power_pin_bpi_m1p>;
 		regulator-name = "gmac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -109,6 +114,10 @@
 	cpu-supply = <&reg_dcdc2>;
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -119,20 +128,24 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_rgmii_a>;
-	phy = <&phy1>;
-	phy-mode = "rgmii";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
+};
 
-	phy1: ethernet-phy@1 {
-		reg = <1>;
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
 	};
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -150,25 +163,26 @@
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pin>;
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m1p>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
-	cd-inverted;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
 	status = "okay";
 };
 
 &mmc3 {
 	#address-cells = <1>;
 	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	mmc-pwrseq = <&mmc3_pwrseq>;
 	bus-width = <4>;
@@ -185,11 +199,6 @@
 	};
 };
 
-&mmc3_pins_a {
-	/* AP6210 requires pull-up */
-	bias-pull-up;
-};
-
 &ohci0 {
 	status = "okay";
 };
@@ -202,29 +211,6 @@
 	status = "okay";
 };
 
-&pio {
-	gmac_power_pin_bpi_m1p: gmac_power_pin@0 {
-		pins = "PH23";
-		function = "gpio_out";
-	};
-
-	led_pins_bpi_m1p: led_pins@0 {
-		pins = "PH24", "PH25";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin_bpi_m1p: mmc0_cd_pin@0 {
-		pins = "PH10";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	mmc3_pwrseq_pin_bpi_m1p: mmc3_pwrseq_pin@0 {
-		pins = "PH22";
-		function = "gpio_out";
-	};
-};
-
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -256,7 +242,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
index 88a1c2363c6c..d8b362c9661a 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
@@ -48,6 +48,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "LeMaker Banana Pi";
@@ -63,12 +64,21 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_bananapi>;
 
-		green {
+		led {
 			label = "bananapi:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
 		};
@@ -76,8 +86,6 @@
 
 	reg_gmac_3v3: gmac-3v3 {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gmac_power_pin_bananapi>;
 		regulator-name = "gmac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -97,16 +105,19 @@
 
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
-	operating-points = <
+	operating-points =
 		/* kHz	  uV */
-		960000	1400000
-		912000	1400000
-		864000	1350000
-		720000	1250000
-		528000	1150000
-		312000	1100000
-		144000	1050000
-		>;
+		<960000	1400000>,
+		<912000	1400000>,
+		<864000	1350000>,
+		<720000	1250000>,
+		<528000	1150000>,
+		<312000	1100000>,
+		<144000	1050000>;
+};
+
+&de {
+	status = "okay";
 };
 
 &ehci0 {
@@ -119,20 +130,24 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_rgmii_a>;
-	phy = <&phy1>;
-	phy-mode = "rgmii";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
 
-	phy1: ethernet-phy@1 {
-		reg = <1>;
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
 	};
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -143,24 +158,51 @@
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pin>;
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				linux,default-trigger = "netdev";
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_AMBER>;
+				function = LED_FUNCTION_LAN;
+				linux,default-trigger = "netdev";
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+				function = LED_FUNCTION_LAN;
+				linux,default-trigger = "netdev";
+			};
+		};
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
-	cd-inverted;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
 	status = "okay";
 };
 
@@ -177,6 +219,11 @@
 };
 
 &pio {
+	vcc-pa-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pe-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
 	gpio-line-names =
 		/* PA */
 		"ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3",
@@ -227,28 +274,6 @@
 			"SPI-MISO", "SPI-CE1", "",
 		"IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
 		"", "", "", "", "", "", "", "";
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
-		pins = "PH10";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	gmac_power_pin_bananapi: gmac_power_pin@0 {
-		pins = "PH23";
-		function = "gpio_out";
-	};
-
-	led_pins_bananapi: led_pins@0 {
-		pins = "PH24";
-		function = "gpio_out";
-	};
 };
 
 #include "axp209.dtsi"
@@ -292,27 +317,27 @@
 
 &spi0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins_a>,
-		    <&spi0_cs0_pins_a>,
-		    <&spi0_cs1_pins_a>;
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>,
+		    <&spi0_cs1_pi_pin>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
 &uart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins_b>;
+	pinctrl-0 = <&uart3_ph_pins>;
 	status = "okay";
 };
 
 &uart7 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart7_pins_a>;
+	pinctrl-0 = <&uart7_pi_pins>;
 	status = "okay";
 };
 
@@ -326,9 +351,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapro.dts
index e7af1b7c33d5..e22f0e8bb17a 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapro.dts
@@ -62,15 +62,13 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_bananapro>;
 
-		blue {
+		led-0 {
 			label = "bananapro:blue:usr";
 			gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-1 {
 			label = "bananapro:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
 		};
@@ -78,15 +76,11 @@
 
 	wifi_pwrseq: wifi-pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&vmmc3_pin_bananapro>;
 		reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>;
 	};
 
 	reg_gmac_3v3: gmac-3v3 {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gmac_power_pin_bananapro>;
 		regulator-name = "gmac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -114,20 +108,14 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_rgmii_a>;
-	phy = <&phy1>;
-	phy-mode = "rgmii";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -142,30 +130,29 @@
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pin>;
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
-	cd-inverted;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
 	status = "okay";
 };
 
 &mmc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
@@ -189,74 +176,39 @@
 	status = "okay";
 };
 
-&pio {
-	gmac_power_pin_bananapro: gmac_power_pin@0 {
-		pins = "PH23";
-		function = "gpio_out";
-	};
-
-	led_pins_bananapro: led_pins@0 {
-		pins = "PH24", "PG2";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin_bananapro: mmc0_cd_pin@0 {
-		pins = "PH10";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
-		pins = "PH0";
-		function = "gpio_out";
-	};
-
-	usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
-		pins = "PH1";
-		function = "gpio_out";
-	};
-
-	vmmc3_pin_bananapro: vmmc3_pin@0 {
-		pins = "PH22";
-		function = "gpio_out";
-	};
-};
-
 &reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
 	gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
 	status = "okay";
 };
 
 &reg_usb2_vbus {
-	pinctrl-0 = <&usb2_vbus_pin_bananapro>;
 	gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 	status = "okay";
 };
 
 &spi0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins_a>,
-		    <&spi0_cs0_pins_a>,
-		    <&spi0_cs1_pins_a>;
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>,
+		    <&spi0_cs1_pi_pin>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
 &uart4 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins_b>;
+	pinctrl-0 = <&uart4_ph_pins>;
 	status = "okay";
 };
 
 &uart7 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart7_pins_a>;
+	pinctrl-0 = <&uart7_pi_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-cubieboard2.dts
index 2a50207618cb..e35e6990c4b2 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-cubieboard2.dts
@@ -61,17 +61,26 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_cubieboard2>;
 
-		blue {
+		led-0 {
 			label = "cubieboard2:blue:usr";
 			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-1 {
 			label = "cubieboard2:green:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};
@@ -91,6 +100,10 @@
 	cpu-supply = <&reg_dcdc2>;
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -101,19 +114,23 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_mii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
+};
 
-	phy1: ethernet-phy@1 {
-		reg = <1>;
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
 	};
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -124,27 +141,28 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pin>;
 	status = "okay";
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &ohci0 {
 	status = "okay";
 };
@@ -157,19 +175,6 @@
 	status = "okay";
 };
 
-&pio {
-	led_pins_cubieboard2: led_pins@0 {
-		pins = "PH20", "PH21";
-		function = "gpio_out";
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &reg_ahci_5v {
 	status = "okay";
 };
@@ -215,7 +220,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -225,9 +230,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-cubietruck.dts
index bb510187602c..be9b31d0f4b5 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-cubietruck.dts
@@ -61,37 +61,46 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_cubietruck>;
 
-		blue {
+		led-0 {
 			label = "cubietruck:blue:usr";
 			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
 		};
 
-		orange {
+		led-1 {
 			label = "cubietruck:orange:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};
 
-		white {
+		led-2 {
 			label = "cubietruck:white:usr";
 			gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-3 {
 			label = "cubietruck:green:usr";
 			gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
-	mmc3_pwrseq: mmc3_pwrseq {
+	mmc3_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&mmc3_pwrseq_pin_cubietruck>;
 		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
+		clocks = <&ccu CLK_OUT_A>;
+		clock-names = "ext_clock";
 	};
 
 	sound {
@@ -126,6 +135,10 @@
 	cpu-supply = <&reg_dcdc2>;
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -136,19 +149,23 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_rgmii_a>;
-	phy = <&phy1>;
-	phy-mode = "rgmii";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
 	status = "okay";
+};
 
-	phy1: ethernet-phy@1 {
-		reg = <1>;
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
 	};
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -160,35 +177,33 @@
 
 &i2c1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pin>;
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
 &mmc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	mmc-pwrseq = <&mmc3_pwrseq>;
 	bus-width = <4>;
@@ -204,11 +219,6 @@
 	};
 };
 
-&mmc3_pins_a {
-	/* AP6210 requires pull-up */
-	bias-pull-up;
-};
-
 &ohci0 {
 	status = "okay";
 };
@@ -222,45 +232,18 @@
 };
 
 &pio {
-	ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
-		pins = "PH12";
-		function = "gpio_out";
-	};
-
-	led_pins_cubietruck: led_pins@0 {
-		pins = "PH7", "PH11", "PH20", "PH21";
-		function = "gpio_out";
-	};
-
-	mmc3_pwrseq_pin_cubietruck: mmc3_pwrseq_pin@0 {
-		pins = "PH9";
-		function = "gpio_out";
-	};
-
-	usb0_vbus_pin_a: usb0_vbus_pin@0 {
-		pins = "PH17";
-		function = "gpio_out";
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH19";
-		function = "gpio_in";
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		pins = "PH22";
-		function = "gpio_in";
-	};
+	/* Pin outputs low power clock for WiFi and BT */
+	pinctrl-0 = <&clk_out_a_pin>;
+	pinctrl-names = "default";
 };
 
 &pwm {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>;
+	pinctrl-0 = <&pwm0_pin>, <&pwm1_pin>;
 	status = "okay";
 };
 
 &reg_ahci_5v {
-	pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
 	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
@@ -271,6 +254,10 @@
 	status = "okay";
 };
 
+&battery_power_supply {
+	status = "okay";
+};
+
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -297,7 +284,6 @@
 };
 
 &reg_usb0_vbus {
-	pinctrl-0 = <&usb0_vbus_pin_a>;
 	gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
@@ -312,16 +298,33 @@
 
 &spdif {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spdif_tx_pins_a>;
+	pinctrl-0 = <&spdif_tx_pin>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm20702a1";
+		clocks = <&ccu CLK_OUT_A>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
+		host-wakeup-gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
+		shutdown-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */
+		max-speed = <1500000>;
+	};
+};
+
 &usb_otg {
 	dr_mode = "otg";
 	status = "okay";
@@ -332,8 +335,6 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
 	usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
 	usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-haoyu-marsboard.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-haoyu-marsboard.dts
new file mode 100644
index 000000000000..097e479c2772
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-haoyu-marsboard.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Conley Lee
+ * Conley Lee <conleylee@foxmail.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "HAOYU Electronics Marsboard A20";
+	compatible = "haoyu,a20-marsboard", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
+	phy-handle = <&phy0>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	gmac_txerr: gmac-txerr-pin {
+		pins = "PA17";
+		function = "gmac";
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-hummingbird.dts
new file mode 100644
index 000000000000..f1e26b75cd90
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-hummingbird.dts
@@ -0,0 +1,233 @@
+/*
+ * Copyright 2013 Wills Wang
+ *
+ * Wills Wang <wills.wang.open@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Merrii A20 Hummingbird";
+	compatible = "merrii,a20-hummingbird", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_mmc3_vdd: regulator-mmc3-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc3_vdd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		enable-active-high;
+		gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	};
+
+	reg_gmac_vdd: regulator-gmac-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac_vdd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		enable-active-high;
+		gpio = <&pio 7 16 GPIO_ACTIVE_HIGH>; /* PH16 */
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_vdd>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+		reset-assert-us = <10000>;
+		/* wait 1s after reset, otherwise fail to read phy id */
+		reset-deassert-us = <1000000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_mmc3_vdd>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pb_pins>,
+		    <&spi2_cs0_pb_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_cts_rts_pg_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pg_pins>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pi_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-i12-tvbox.dts
index 55809973a568..b21ddd0ec1c2 100644
--- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-i12-tvbox.dts
@@ -61,15 +61,13 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_i12_tvbox>;
 
-		red {
+		led-0 {
 			label = "i12_tvbox:red:usr";
 			gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
 		};
 
-		blue {
+		led-1 {
 			label = "i12_tvbox:blue:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};
@@ -77,8 +75,6 @@
 
 	reg_vmmc3: vmmc3 {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&vmmc3_pin_i12_tvbox>;
 		regulator-name = "vmmc3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -88,8 +84,6 @@
 
 	reg_vmmc3_io: vmmc3-io {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&vmmc3_io_pin_i12_tvbox>;
 		regulator-name = "vmmc3-io";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -101,8 +95,6 @@
 
 	reg_gmac_3v3: gmac-3v3 {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gmac_power_pin_i12_tvbox>;
 		regulator-name = "gmac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -122,20 +114,14 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_mii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -151,23 +137,24 @@
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pin>;
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
 &mmc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins_a>;
 	vmmc-supply = <&reg_vmmc3>;
 	bus-width = <4>;
 	non-removable;
@@ -182,11 +169,6 @@
 	};
 };
 
-&mmc3_pins_a {
-	/* AP6210 / AP6330 requires pull-up */
-	bias-pull-up;
-};
-
 &ohci0 {
 	status = "okay";
 };
@@ -195,28 +177,6 @@
 	status = "okay";
 };
 
-&pio {
-	vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
-		pins = "PH2";
-		function = "gpio_out";
-	};
-
-	vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
-		pins = "PH12";
-		function = "gpio_out";
-	};
-
-	gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
-		pins = "PH21";
-		function = "gpio_out";
-	};
-
-	led_pins_i12_tvbox: led_pins@0 {
-		pins = "PH9", "PH20";
-		function = "gpio_out";
-	};
-};
-
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -227,7 +187,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20-adb4006.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20-adb4006.dts
new file mode 100644
index 000000000000..577ead1d02a0
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20-adb4006.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) 2023 In-Circuit GmbH
+
+/dts-v1/;
+
+#include "sun7i-a20-icnova-a20.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "In-Circuit ICnova A20 ADB4006";
+	compatible = "incircuit,icnova-a20-adb4006", "incircuit,icnova-a20",
+		     "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
+			default-state = "on";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20.dtsi b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20.dtsi
new file mode 100644
index 000000000000..46616c6bc899
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) 2023 In-Circuit GmbH
+
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-swac.dts
index 794e7617f545..413505f45a81 100644
--- a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-swac.dts
@@ -49,7 +49,8 @@
 
 / {
 	model = "ICnova-A20 SWAC";
-	compatible = "swac,icnova-a20-swac", "incircuit,icnova-a20", "allwinner,sun7i-a20";
+	compatible = "incircuit,icnova-a20-swac", "incircuit,icnova-a20",
+		     "allwinner,sun7i-a20";
 
 	aliases {
 		serial0 = &uart0;
@@ -74,19 +75,13 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_mii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -97,18 +92,19 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 8 5 GPIO_ACTIVE_HIGH>; /* PI5 */
-	cd-inverted;
+	cd-gpios = <&pio 8 5 GPIO_ACTIVE_LOW>; /* PI5 */
 	status = "okay";
 };
 
@@ -157,7 +153,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-itead-ibox.dts
index 8a8a6dbcd414..8ff83016ff5a 100644
--- a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-itead-ibox.dts
@@ -53,13 +53,13 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_itead_core>;
 
-		green {
+		led-0 {
 			label = "itead_core:green:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		blue {
+		led-1 {
 			label = "itead_core:blue:usr";
 			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -96,11 +96,13 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_mii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
+};
 
+&gmac_mdio {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 	};
@@ -115,22 +117,19 @@
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pin>;
 	status = "okay";
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
 &pio {
-	led_pins_itead_core: led_pins@0 {
+	led_pins_itead_core: led-pins {
 		pins = "PH20","PH21";
 		function = "gpio_out";
 		drive-strength = <20>;
@@ -143,6 +142,6 @@
 
 &spdif {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spdif_tx_pins_a>;
+	pinctrl-0 = <&spdif_tx_pin>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-lamobo-r1.dts
index 004b6ddac813..97518afe4658 100644
--- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-lamobo-r1.dts
@@ -61,12 +61,21 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_lamobo_r1>;
 
-		green {
+		led {
 			label = "lamobo_r1:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
 		};
@@ -74,8 +83,6 @@
 
 	reg_gmac_3v3: gmac-3v3 {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gmac_power_pin_lamobo_r1>;
 		regulator-name = "gmac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -98,6 +105,10 @@
 	cpu-supply = <&reg_dcdc2>;
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -108,7 +119,7 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
@@ -126,8 +137,6 @@
 		switch: ethernet-switch@1e {
 			compatible = "brcm,bcm53125";
 			reg = <30>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 
 			ports {
 				#address-cells = <1>;
@@ -173,9 +182,17 @@
 	};
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -186,24 +203,19 @@
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pin>;
 	status = "okay";
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
-	cd-inverted;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
 	status = "okay";
 };
 
@@ -215,31 +227,15 @@
 	status = "okay";
 };
 
-&pio {
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 {
-		pins = "PH10";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	gmac_power_pin_lamobo_r1: gmac_power_pin@0 {
-		pins = "PH23";
-		function = "gpio_out";
-	};
+#include "axp209.dtsi"
 
-	led_pins_lamobo_r1: led_pins@0 {
-		pins = "PH24";
-		function = "gpio_out";
-	};
+&ac_power_supply {
+	status = "okay";
 };
 
-#include "axp209.dtsi"
+&battery_power_supply {
+	status = "okay";
+};
 
 &reg_ahci_5v {
 	gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
@@ -282,27 +278,27 @@
 
 &spi0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins_a>,
-		    <&spi0_cs0_pins_a>,
-		    <&spi0_cs1_pins_a>;
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>,
+		    <&spi0_cs1_pi_pin>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
 &uart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins_b>;
+	pinctrl-0 = <&uart3_ph_pins>;
 	status = "okay";
 };
 
 &uart7 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart7_pins_a>;
+	pinctrl-0 = <&uart7_pi_pins>;
 	status = "okay";
 };
 
@@ -316,9 +312,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-linutronix-testbox-v2.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-linutronix-testbox-v2.dts
new file mode 100644
index 000000000000..da5a2eea4ce3
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-linutronix-testbox-v2.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2020 Linutronix GmbH
+ * Author: Benedikt Spranger <b.spranger@linutronix.de>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-lamobo-r1.dts"
+
+/ {
+	model = "Lamobo R1";
+	compatible = "linutronix,testbox-v2", "lamobo,lamobo-r1", "allwinner,sun7i-a20";
+
+	leds {
+		led-opto1 {
+			label = "lamobo_r1:opto:powerswitch";
+			gpios = <&pio 7 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-opto2 {
+			label = "lamobo_r1:opto:relay";
+			gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		status = "okay";
+	};
+
+	atecc508a@60 {
+		compatible = "atmel,atecc508a";
+		reg = <0x60>;
+	};
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can_ph_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-m3.dts
index 43c94787ef07..f161d5238860 100644
--- a/arch/arm/boot/dts/sun7i-a20-m3.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-m3.dts
@@ -63,10 +63,8 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_m3>;
 
-		blue {
+		led {
 			label = "m3:blue:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};
@@ -83,19 +81,13 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_mii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -111,23 +103,24 @@
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pin>;
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
 &mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	non-removable;
@@ -142,13 +135,6 @@
 	status = "okay";
 };
 
-&pio {
-	led_pins_m3: led_pins@0 {
-		pins = "PH20";
-		function = "gpio_out";
-	};
-};
-
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -159,7 +145,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-mk808c.dts
index f7413094183c..1491c603f661 100644
--- a/arch/arm/boot/dts/sun7i-a20-mk808c.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-mk808c.dts
@@ -66,12 +66,27 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
 };
 
 &codec {
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -80,9 +95,17 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+	remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -96,24 +119,17 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v0>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -129,18 +145,6 @@
 	status = "okay";
 };
 
-&pio {
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		pins = "PH5";
-		function = "gpio_in";
-	};
-};
-
 &reg_usb0_vbus {
 	status = "okay";
 };
@@ -155,13 +159,13 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins_a>;
+	pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>;
 	status = "okay";
 };
 
@@ -171,8 +175,6 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
 	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
 	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb-emmc.dts
new file mode 100644
index 000000000000..fb835730bbc4
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb-emmc.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for A20-Olimex-SOM-EVB-eMMC Board
+ *
+ * Copyright (C) 2018 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-olimex-som-evb.dts"
+
+/ {
+
+	model = "Olimex A20-Olimex-SOM-EVB-eMMC";
+	compatible = "olimex,a20-olimex-som-evb-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 18 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb.dts
index 64c8ef9a2756..f05ee32bc9cb 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb.dts
@@ -61,12 +61,21 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_olimex_som_evb>;
 
-		green {
+		led {
 			label = "a20-olimex-som-evb:green:usr";
 			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -79,6 +88,10 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -97,19 +110,23 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_rgmii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	status = "okay";
+};
 
-	phy1: ethernet-phy@1 {
-		reg = <1>;
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
 	};
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -120,14 +137,10 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };
 
@@ -135,49 +148,49 @@
 	vref-supply = <&reg_vcc3v0>;
 	status = "okay";
 
-	button@190 {
+	button-190 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <190000>;
 	};
 
-	button@390 {
+	button-390 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
 		voltage = <390000>;
 	};
 
-	button@600 {
+	button-600 {
 		label = "Menu";
 		linux,code = <KEY_MENU>;
 		channel = <0>;
 		voltage = <600000>;
 	};
 
-	button@800 {
+	button-800 {
 		label = "Search";
 		linux,code = <KEY_SEARCH>;
 		channel = <0>;
 		voltage = <800000>;
 	};
 
-	button@980 {
+	button-980 {
 		label = "Home";
 		linux,code = <KEY_HOMEPAGE>;
 		channel = <0>;
 		voltage = <980000>;
 	};
 
-	button@1180 {
+	button-1180 {
 		label = "Esc";
 		linux,code = <KEY_ESC>;
 		channel = <0>;
 		voltage = <1180000>;
 	};
 
-	button@1400 {
+	button-1400 {
 		label = "Enter";
 		linux,code = <KEY_ENTER>;
 		channel = <0>;
@@ -185,23 +198,23 @@
 	};
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
 &mmc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olimex_som_evb>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
-	cd-inverted;
+	cd-gpios = <&pio 7 0 GPIO_ACTIVE_LOW>; /* PH0 */
 	status = "okay";
 };
 
@@ -218,36 +231,14 @@
 };
 
 &pio {
-	ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 {
-		pins = "PC3";
-		function = "gpio_out";
-	};
-
-	led_pins_olimex_som_evb: led_pins@0 {
+	led_pins_olimex_som_evb: led-pins {
 		pins = "PH2";
 		function = "gpio_out";
 		drive-strength = <20>;
 	};
-
-	mmc3_cd_pin_olimex_som_evb: mmc3_cd_pin@0 {
-		pins = "PH0";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		pins = "PH5";
-		function = "gpio_in";
-	};
 };
 
 &reg_ahci_5v {
-	pinctrl-0 = <&ahci_pwr_pin_olimex_som_evb>;
 	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
@@ -293,33 +284,33 @@
 
 &spi1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins_a>,
-		    <&spi1_cs0_pins_a>;
+	pinctrl-0 = <&spi1_pi_pins>,
+		    <&spi1_cs0_pi_pin>;
 	status = "okay";
 };
 
 &spi2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins_a>,
-		    <&spi2_cs0_pins_a>;
+	pinctrl-0 = <&spi2_pc_pins>,
+		    <&spi2_cs0_pc_pin>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
 &uart6 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart6_pins_a>;
+	pinctrl-0 = <&uart6_pi_pins>;
 	status = "okay";
 };
 
 &uart7 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart7_pins_a>;
+	pinctrl-0 = <&uart7_pi_pins>;
 	status = "okay";
 };
 
@@ -329,8 +320,6 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
 	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */
 	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH05 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts
new file mode 100644
index 000000000000..e8977c2fe798
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for A20-SOM204-EVB-eMMC Board
+ *
+ * Copyright (C) 2018 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-olimex-som204-evb.dts"
+
+/ {
+	model = "Olimex A20-SOM204-EVB-eMMC";
+	compatible = "olimex,a20-olimex-som204-evb-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: pwrseq-1 {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb.dts
new file mode 100644
index 000000000000..a55406657449
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb.dts
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for A20-SOM204-EVB Board
+ *
+ * Copyright (C) 2018 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Olimex A20-SOM204-EVB";
+	compatible = "olimex,a20-olimex-som204-evb", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart4;
+		serial2 = &uart7;
+		spi0 = &spi1;
+		spi1 = &spi2;
+		ethernet1 = &rtl8723bs;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "a20-som204-evb:green:stat";
+			gpios = <&pio 8 0 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "a20-som204-evb:green:led1";
+			gpios = <&pio 8 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-2 {
+			label = "a20-som204-evb:yellow:led2";
+			gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	rtl_pwrseq: pwrseq-0 {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can_ph_pins>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy3>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+/* Exposed to UEXT1 */
+&i2c1 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+/* Exposed to UEXT2 */
+&i2c2 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+		reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+		reset-assert-us = <10000>;
+		/* wait 1s after reset, otherwise fail to read phy id */
+		reset-deassert-us = <1000000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&rtl_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723bs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	uart3_rts_pin: uart3-rts-pin {
+		pins = "PG8";
+		function = "uart3";
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1300000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pg";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+/* Exposed to UEXT1 */
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pi_pins>,
+		    <&spi1_cs0_pi_pin>;
+	status = "okay";
+};
+
+/* Exposed to UEXT2 */
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pc_pins>,
+		    <&spi2_cs0_pc_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+/* Used for RTL8723BS bluetooth */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_pin>;
+	status = "okay";
+};
+
+/* Exposed to UEXT1 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pg_pins>;
+	status = "okay";
+};
+
+/* Exposed to UEXT2 */
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime-emmc.dts
new file mode 100644
index 000000000000..033cab3443f8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime-emmc.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+#include "sun7i-a20-olinuxino-lime.dts"
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME-eMMC";
+	compatible = "olimex,a20-olinuxino-lime-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime.dts
index 2ce1a9f13a17..92938d022295 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime.dts
@@ -62,12 +62,23 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxinolime>;
 
-		green {
+		led {
 			label = "a20-olinuxino-lime:green:usr";
 			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -80,6 +91,10 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -90,19 +105,23 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_mii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
 
-	phy1: ethernet-phy@1 {
-		reg = <1>;
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
 	};
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -117,8 +136,6 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
 	eeprom: eeprom@50 {
@@ -128,13 +145,16 @@
 	};
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -151,32 +171,14 @@
 };
 
 &pio {
-	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
-		pins = "PC3";
-		function = "gpio_out";
-	};
-
-	led_pins_olinuxinolime: led_pins@0 {
+	led_pins_olinuxinolime: led-pins {
 		pins = "PH2";
 		function = "gpio_out";
 		drive-strength = <20>;
 	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		pins = "PH5";
-		function = "gpio_in";
-		bias-pull-down;
-	};
 };
 
 &reg_ahci_5v {
-	pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
 	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
@@ -195,7 +197,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -205,10 +207,8 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2-emmc.dts
index 81f376f2a44d..decb014a382b 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2-emmc.dts
@@ -48,23 +48,12 @@
 	compatible = "olimex,a20-olinuxino-lime2-emmc", "allwinner,sun7i-a20";
 
 	mmc2_pwrseq: pwrseq {
-		pinctrl-0 = <&mmc2_pins_nrst>;
-		pinctrl-names = "default";
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
 	};
 };
 
-&pio {
-	mmc2_pins_nrst: mmc2-rst-pin {
-		pins = "PC16";
-		function = "gpio_out";
-	};
-};
-
 &mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	vqmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2.dts
index 097bd755764c..435a189332e8 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2.dts
@@ -59,19 +59,30 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxinolime>;
 
-		green {
+		led {
 			label = "a20-olinuxino-lime2:green:usr";
 			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
-	reg_axp_ipsout: axp_ipsout {
+	reg_axp_ipsout: regulator-axp-ipsout {
 		compatible = "regulator-fixed";
 		regulator-name = "axp-ipsout";
 		regulator-min-microvolt = <5000000>;
@@ -85,6 +96,10 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -95,19 +110,23 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_rgmii_a>;
-	phy = <&phy1>;
-	phy-mode = "rgmii";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
 	status = "okay";
+};
 
-	phy1: ethernet-phy@1 {
-		reg = <1>;
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
 	};
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -118,8 +137,6 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
 	eeprom: eeprom@50 {
@@ -129,13 +146,20 @@
 	};
 };
 
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -152,43 +176,34 @@
 };
 
 &pio {
-	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
-		pins = "PC3";
-		function = "gpio_out";
-	};
+	vcc-pa-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pe-supply = <&reg_ldo3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_ldo4>;
 
-	led_pins_olinuxinolime: led_pins@0 {
+	led_pins_olinuxinolime: led-pins {
 		pins = "PH2";
 		function = "gpio_out";
 		drive-strength = <20>;
 	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		pins = "PH5";
-		function = "gpio_in";
-		bias-pull-down;
-	};
-
-	usb0_vbus_pin_lime2: usb0_vbus_pin@0 {
-		pins = "PC17";
-		function = "gpio_out";
-	};
 };
 
 &reg_ahci_5v {
-	pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
 	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 #include "axp209.dtsi"
 
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -221,6 +236,8 @@
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <2800000>;
 	regulator-name = "vddio-csi0";
+	regulator-soft-start;
+	regulator-ramp-delay = <1600>;
 };
 
 &reg_ldo4 {
@@ -230,7 +247,6 @@
 };
 
 &reg_usb0_vbus {
-	pinctrl-0 = <&usb0_vbus_pin_lime2>;
 	gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
@@ -245,7 +261,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -255,10 +271,8 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro-emmc.dts
new file mode 100644
index 000000000000..2337b44a88aa
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro-emmc.dts
@@ -0,0 +1,68 @@
+ /*
+ * Copyright 2017 Olimex Ltd.
+ * Stefan Mavrodiev <stefan@olimex.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun7i-a20-olinuxino-micro.dts"
+
+/ {
+	model = "Olimex A20-OLinuXino-MICRO-eMMC";
+	compatible = "olimex,a20-olinuxino-micro-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro.dts
index 0b7403e4d687..a1b89b2a2999 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro.dts
@@ -66,12 +66,23 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxino>;
 
-		green {
+		led {
 			label = "a20-olinuxino-micro:green:usr";
 			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -92,6 +103,10 @@
 	cpu-supply = <&reg_dcdc2>;
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -102,19 +117,23 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_mii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
+};
 
-	phy1: ethernet-phy@1 {
-		reg = <1>;
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
 	};
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -125,8 +144,6 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
 	eeprom: eeprom@50 {
@@ -137,8 +154,6 @@
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };
 
@@ -146,49 +161,49 @@
 	vref-supply = <&reg_vcc3v0>;
 	status = "okay";
 
-	button@191 {
+	button-191 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <191274>;
 	};
 
-	button@392 {
+	button-392 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
 		voltage = <392644>;
 	};
 
-	button@601 {
+	button-601 {
 		label = "Menu";
 		linux,code = <KEY_MENU>;
 		channel = <0>;
 		voltage = <601151>;
 	};
 
-	button@795 {
+	button-795 {
 		label = "Search";
 		linux,code = <KEY_SEARCH>;
 		channel = <0>;
 		voltage = <795090>;
 	};
 
-	button@987 {
+	button-987 {
 		label = "Home";
 		linux,code = <KEY_HOMEPAGE>;
 		channel = <0>;
 		voltage = <987387>;
 	};
 
-	button@1184 {
+	button-1184 {
 		label = "Esc";
 		linux,code = <KEY_ESC>;
 		channel = <0>;
 		voltage = <1184678>;
 	};
 
-	button@1398 {
+	button-1398 {
 		label = "Enter";
 		linux,code = <KEY_ENTER>;
 		channel = <0>;
@@ -196,23 +211,23 @@
 	};
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
 &mmc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
-	cd-inverted;
+	cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */
 	status = "okay";
 };
 
@@ -229,32 +244,27 @@
 };
 
 &pio {
-	mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
-		pins = "PH11";
-		function = "gpio_in";
-		bias-pull-up;
+	gmac_txerr: gmac-txerr-pin {
+		pins = "PA17";
+		function = "gmac";
 	};
 
-	led_pins_olinuxino: led_pins@0 {
+	led_pins_olinuxino: led-pins {
 		pins = "PH2";
 		function = "gpio_out";
 		drive-strength = <20>;
 	};
+};
 
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
+#include "axp209.dtsi"
 
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		pins = "PH5";
-		function = "gpio_in";
-		bias-pull-down;
-	};
+&ac_power_supply {
+	status = "okay";
 };
 
-#include "axp209.dtsi"
+&battery_power_supply {
+	status = "okay";
+};
 
 &reg_dcdc2 {
 	regulator-always-on;
@@ -295,33 +305,33 @@
 
 &spi1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins_a>,
-		    <&spi1_cs0_pins_a>;
+	pinctrl-0 = <&spi1_pi_pins>,
+		    <&spi1_cs0_pi_pin>;
 	status = "okay";
 };
 
 &spi2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins_a>,
-		    <&spi2_cs0_pins_a>;
+	pinctrl-0 = <&spi2_pc_pins>,
+		    <&spi2_cs0_pc_pin>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
 &uart6 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart6_pins_a>;
+	pinctrl-0 = <&uart6_pi_pins>;
 	status = "okay";
 };
 
 &uart7 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart7_pins_a>;
+	pinctrl-0 = <&uart7_pi_pins>;
 	status = "okay";
 };
 
@@ -330,11 +340,13 @@
 	status = "okay";
 };
 
+&usb_power_supply {
+	status = "okay";
+};
+
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi-mini.dts
index 7af4c8fc1865..84efa01e7cba 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi-mini.dts
@@ -61,17 +61,26 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_orangepi>;
 
-		green {
+		led-0 {
 			label = "orangepi:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
 		};
 
-		blue {
+		led-1 {
 			label = "orangepi:blue:usr";
 			gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
 		};
@@ -79,8 +88,6 @@
 
 	reg_gmac_3v3: gmac-3v3 {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gmac_power_pin_orangepi>;
 		regulator-name = "gmac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -98,6 +105,10 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -108,20 +119,24 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_rgmii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
+};
 
-	phy1: ethernet-phy@1 {
-		reg = <1>;
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
 	};
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -135,27 +150,27 @@
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pin>;
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
-	cd-inverted;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
 	status = "okay";
 };
 
 &mmc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_orangepi>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
-	cd-inverted;
+	cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */
 	status = "okay";
 };
 
@@ -163,46 +178,6 @@
 	status = "okay";
 };
 
-&pio {
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
-		pins = "PH10";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	mmc3_cd_pin_orangepi: mmc3_cd_pin@0 {
-		pins = "PH11";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
-		pins = "PH22";
-		function = "gpio_out";
-	};
-
-	gmac_power_pin_orangepi: gmac_power_pin@0 {
-		pins = "PH23";
-		function = "gpio_out";
-	};
-
-	led_pins_orangepi: led_pins@0 {
-		pins = "PH24", "PH25";
-		function = "gpio_out";
-	};
-
-	usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
-		pins = "PH26";
-		function = "gpio_out";
-	};
-};
-
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -233,20 +208,18 @@
 };
 
 &reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
 	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
 	status = "okay";
 };
 
 &reg_usb2_vbus {
-	pinctrl-0 = <&usb2_vbus_pin_bananapro>;
 	gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -260,9 +233,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi.dts
index 0a8d4a05e8a0..5d77f1d9818f 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi.dts
@@ -63,10 +63,8 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_orangepi>;
 
-		green {
+		led {
 			label = "orangepi:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
 		};
@@ -74,8 +72,6 @@
 
 	reg_gmac_3v3: gmac-3v3 {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gmac_power_pin_orangepi>;
 		regulator-name = "gmac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -99,20 +95,14 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_rgmii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -126,17 +116,20 @@
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pin>;
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
-	cd-inverted;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
 	status = "okay";
 };
 
@@ -144,40 +137,6 @@
 	status = "okay";
 };
 
-&pio {
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
-		pins = "PH10";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
-		pins = "PH22";
-		function = "gpio_out";
-	};
-
-	gmac_power_pin_orangepi: gmac_power_pin@0 {
-		pins = "PH23";
-		function = "gpio_out";
-	};
-
-	led_pins_orangepi: led_pins@0 {
-		pins = "PH24";
-		function = "gpio_out";
-	};
-
-	usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
-		pins = "PH26";
-		function = "gpio_out";
-	};
-};
-
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -208,20 +167,18 @@
 };
 
 &reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
 	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
 	status = "okay";
 };
 
 &reg_usb2_vbus {
-	pinctrl-0 = <&usb2_vbus_pin_bananapro>;
 	gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -235,9 +192,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3-nano.dts
index 39bc73db72e5..e40ecb48d726 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3-nano.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright 2015 Adam Sampson <ats@offog.org>
+ * Copyright 2015-2020 Adam Sampson <ats@offog.org>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -58,19 +58,26 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_pcduino3_nano>;
 
-		/* Marked "LED3" on the PCB. */
-		usr1 {
+		led-3 {
 			label = "pcduino3-nano:green:usr1";
 			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */
 		};
 
-		/* Marked "LED4" on the PCB. */
-		usr2 {
+		led-4 {
 			label = "pcduino3-nano:green:usr2";
 			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */
 		};
@@ -90,6 +97,10 @@
 	cpu-supply = <&reg_dcdc2>;
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -100,19 +111,23 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_rgmii_a>;
-	phy = <&phy1>;
-	phy-mode = "rgmii";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
 	status = "okay";
+};
 
-	phy1: ethernet-phy@1 {
-		reg = <1>;
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
 	};
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -124,17 +139,20 @@
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pin>;
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -150,31 +168,7 @@
 	status = "okay";
 };
 
-&pio {
-	ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 {
-		pins = "PH2";
-		function = "gpio_out";
-	};
-
-	led_pins_pcduino3_nano: led_pins@0 {
-		pins = "PH16", "PH15";
-		function = "gpio_out";
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 {
-		pins = "PD2";
-		function = "gpio_out";
-	};
-};
-
 &reg_ahci_5v {
-	pinctrl-0 = <&ahci_pwr_pin_pcduino3_nano>;
 	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
 	status = "okay";
 };
@@ -208,14 +202,13 @@
 
 /* A single regulator (U24) powers both USB host ports. */
 &reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>;
 	gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -225,9 +218,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3.dts
index 777152a3df0f..928b86a95f34 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3.dts
@@ -63,37 +63,34 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_pcduino3>;
 
-		tx {
+		led-0 {
 			label = "pcduino3:green:tx";
 			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
 		};
 
-		rx {
+		led-1 {
 			label = "pcduino3:green:rx";
 			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&key_pins_pcduino3>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button@0 {
+
+		key-back {
 			label = "Key Back";
 			linux,code = <KEY_BACK>;
 			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
 		};
-		button@1 {
+
+		key-home {
 			label = "Key Home";
 			linux,code = <KEY_HOME>;
 			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
 		};
-		button@2 {
+
+		key-menu {
 			label = "Key Menu";
 			linux,code = <KEY_MENU>;
 			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
@@ -124,19 +121,13 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_mii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -150,17 +141,20 @@
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pin>;
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -176,24 +170,6 @@
 	status = "okay";
 };
 
-&pio {
-	led_pins_pcduino3: led_pins@0 {
-		pins = "PH15", "PH16";
-		function = "gpio_out";
-	};
-
-	key_pins_pcduino3: key_pins@0 {
-		pins = "PH17", "PH18", "PH19";
-		function = "gpio_in";
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &reg_ahci_5v {
 	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 	status = "okay";
@@ -234,7 +210,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -244,9 +220,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-wexler-tab7200.dts
index f8d0aafb9f88..fef02fcbbdf8 100644
--- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-wexler-tab7200.dts
@@ -63,9 +63,8 @@
 		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bl_enable_pin>;
 		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_vcc3v3>;
 	};
 
 	chosen {
@@ -74,8 +73,6 @@
 };
 
 &codec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&codec_pa_pin>;
 	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
 	status = "okay";
 };
@@ -93,8 +90,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -107,14 +102,10 @@
 #include "axp209.dtsi"
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 
 	gt911: touchscreen@5d {
@@ -122,8 +113,6 @@
 		reg = <0x5d>;
 		interrupt-parent = <&pio>;
 		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_reset_pin>;
 		irq-gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* INT (PH21) */
 		reset-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* RST (PB13) */
 		touchscreen-swapped-x-y;
@@ -134,14 +123,14 @@
 	vref-supply = <&reg_vcc3v0>;
 	status = "okay";
 
-	button@571 {
+	button-571 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <571428>;
 	};
 
-	button@761 {
+	button-761 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
@@ -150,12 +139,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
@@ -171,32 +157,9 @@
 	status = "okay";
 };
 
-&pio {
-	bl_enable_pin: bl_enable_pin@0 {
-		pins = "PH7";
-		function = "gpio_out";
-	};
-
-	codec_pa_pin: codec_pa_pin@0 {
-		pins = "PH15";
-		function = "gpio_out";
-	};
-
-	ts_reset_pin: ts_reset_pin@0 {
-		pins = "PB13";
-		function = "gpio_out";
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &pwm {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins_a>;
+	pinctrl-0 = <&pwm0_pin>;
 	status = "okay";
 };
 
@@ -239,7 +202,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -253,9 +216,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-wits-pro-a20-dkt.dts
index 7f8405a0dd0f..29199b6a3b4a 100644
--- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-wits-pro-a20-dkt.dts
@@ -60,10 +60,8 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	mmc3_pwrseq: mmc3_pwrseq {
+	mmc3_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&vmmc3_pin_ap6xxx_wl_regon>;
 		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
 	};
 };
@@ -82,19 +80,13 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_rgmii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -105,32 +97,29 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };
 
 #include "axp209.dtsi"
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 	status = "okay";
 };
 
 &mmc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	mmc-pwrseq = <&mmc3_pwrseq>;
 	bus-width = <4>;
@@ -158,19 +147,6 @@
 	status = "okay";
 };
 
-&pio {
-	vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 {
-		pins = "PH9";
-		function = "gpio_out";
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -210,7 +186,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -224,9 +200,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20.dtsi b/arch/arm/boot/dts/allwinner/sun7i-a20.dtsi
new file mode 100644
index 000000000000..5f44f09c5545
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20.dtsi
@@ -0,0 +1,1710 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/clock/sun7i-a20-ccu.h>
+#include <dt-bindings/reset/sun4i-a10-ccu.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &gmac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-lcd0-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>,
+				 <&ccu CLK_HDMI>;
+			status = "disabled";
+		};
+
+		framebuffer-lcd0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+
+		framebuffer-lcd0-tve0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-tve0";
+			clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
+				 <&ccu CLK_AHB_DE_BE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH1>,
+				 <&ccu CLK_DRAM_TVE0>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points =
+				/* kHz	  uV */
+				<960000	1400000>,
+				<912000	1400000>,
+				<864000	1300000>,
+				<720000	1200000>,
+				<528000	1100000>,
+				<312000	1000000>,
+				<144000	1000000>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points =
+				/* kHz	  uV */
+				<960000	1400000>,
+				<912000	1400000>,
+				<864000	1300000>,
+				<720000	1200000>,
+				<528000	1100000>,
+				<312000	1000000>,
+				<144000	1000000>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu-alert0 {
+					/* milliCelsius */
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+		default-pool {
+			compatible = "shared-dma-pool";
+			size = <0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		/*
+		 * The following two are dummy clocks, placeholders
+		 * used in the gmac_tx clock. The gmac driver will
+		 * choose one parent depending on the PHY interface
+		 * mode, using clk_set_rate auto-reparenting.
+		 *
+		 * The actual TX clock rate is not controlled by the
+		 * gmac_tx clock.
+		 */
+		mii_phy_tx_clk: clk-mii-phy-tx {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+			clock-output-names = "mii_phy_tx";
+		};
+
+		gmac_int_tx_clk: clk-gmac-int-tx {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			clock-output-names = "gmac_int_tx";
+		};
+
+		gmac_tx_clk: clk@1c20164 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-gmac-clk";
+			reg = <0x01c20164 0x4>;
+			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+			clock-output-names = "gmac_tx";
+		};
+	};
+
+
+	de: display-engine {
+		compatible = "allwinner,sun7i-a20-display-engine";
+		allwinner,pipelines = <&fe0>, <&fe1>;
+		status = "disabled";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		system-control@1c00000 {
+			compatible = "allwinner,sun7i-a20-system-control",
+				     "allwinner,sun4i-a10-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a: sram@0 {
+				compatible = "mmio-sram";
+				reg = <0x00000000 0xc000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00000000 0xc000>;
+
+				emac_sram: sram-section@8000 {
+					compatible = "allwinner,sun7i-a20-sram-a3-a4",
+						     "allwinner,sun4i-a10-sram-a3-a4";
+					reg = <0x8000 0x4000>;
+					status = "disabled";
+				};
+			};
+
+			sram_d: sram@10000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0 {
+					compatible = "allwinner,sun7i-a20-sram-d",
+						     "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0xd0000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0xd0000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun7i-a20-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		nmi_intc: interrupt-controller@1c00030 {
+			compatible = "allwinner,sun7i-a20-sc-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01c00030 0x0c>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DMA>;
+			#dma-cells = <2>;
+		};
+
+		nfc: nand-controller@1c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 3>;
+			dma-names = "rxtx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <4>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <1>;
+		};
+
+		csi0: csi@1c09000 {
+			compatible = "allwinner,sun7i-a20-csi0";
+			reg = <0x01c09000 0x1000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
+			clock-names = "bus", "isp", "ram";
+			resets = <&ccu RST_CSI0>;
+			status = "disabled";
+		};
+
+		emac: ethernet@1c0b000 {
+			compatible = "allwinner,sun4i-a10-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_EMAC>;
+			allwinner,sram = <&emac_sram 1>;
+			status = "disabled";
+		};
+
+		mdio: mdio@1c0b080 {
+			compatible = "allwinner,sun4i-a10-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun7i-a20-tcon0",
+				     "allwinner,sun7i-a20-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_TCON0>, <&ccu RST_LVDS>;
+			reset-names = "lcd", "lvds";
+			clocks = <&ccu CLK_AHB_LCD0>,
+				 <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_TCON0_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon0-pixel-clock";
+			#clock-cells = <0>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 14>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon0>;
+					};
+
+					tcon0_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		tcon1: lcd-controller@1c0d000 {
+			compatible = "allwinner,sun7i-a20-tcon1",
+				     "allwinner,sun7i-a20-tcon";
+			reg = <0x01c0d000 0x1000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_TCON1>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB_LCD1>,
+				 <&ccu CLK_TCON1_CH0>,
+				 <&ccu CLK_TCON1_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon1-pixel-clock";
+			#clock-cells = <0>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 15>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon1_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon1>;
+					};
+
+					tcon1_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon1_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon1>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun7i-a20-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_VE>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC3>,
+				 <&ccu CLK_MMC3>,
+				 <&ccu CLK_MMC3_OUTPUT>,
+				 <&ccu CLK_MMC3_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc3_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,sun4i-a10-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_AHB_OTG>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun7i-a20-usb-phy";
+			reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
+			reg-names = "phy_ctrl", "pmu1", "pmu2";
+			clocks = <&ccu CLK_USB_PHY>;
+			clock-names = "usb_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>;
+			reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@1c14000 {
+			compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_EHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c14400 {
+			compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		crypto: crypto-engine@1c15000 {
+			compatible = "allwinner,sun7i-a20-crypto",
+				     "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
+			clock-names = "ahb", "mod";
+		};
+
+		hdmi: hdmi@1c16000 {
+			compatible = "allwinner,sun7i-a20-hdmi",
+				     "allwinner,sun5i-a10s-hdmi";
+			reg = <0x01c16000 0x1000>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_PLL_VIDEO0_2X>,
+				 <&ccu CLK_PLL_VIDEO1_2X>;
+			clock-names = "ahb", "mod", "pll-0", "pll-1";
+			dmas = <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_DEDICATED 24>;
+			dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+
+					hdmi_in_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		spi2: spi@1c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <1>;
+		};
+
+		ahci: sata@1c18000 {
+			compatible = "allwinner,sun4i-a10-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1c000 {
+			compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_EHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c1c400 {
+			compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		csi1: csi@1c1d000 {
+			compatible = "allwinner,sun7i-a20-csi1",
+				     "allwinner,sun4i-a10-csi1";
+			reg = <0x01c1d000 0x1000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>;
+			clock-names = "bus", "ram";
+			resets = <&ccu RST_CSI1>;
+			status = "disabled";
+		};
+
+		spi3: spi@1c1f000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c1f000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 31>,
+			       <&dma SUN4I_DMA_DEDICATED 30>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <1>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun7i-a20-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun7i-a20-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			/omit-if-no-ref/
+			can_pa_pins: can-pa-pins {
+				pins = "PA16", "PA17";
+				function = "can";
+			};
+
+			/omit-if-no-ref/
+			can_ph_pins: can-ph-pins {
+				pins = "PH20", "PH21";
+				function = "can";
+			};
+
+			/omit-if-no-ref/
+			clk_out_a_pin: clk-out-a-pin {
+				pins = "PI12";
+				function = "clk_out_a";
+			};
+
+			/omit-if-no-ref/
+			clk_out_b_pin: clk-out-b-pin {
+				pins = "PI13";
+				function = "clk_out_b";
+			};
+
+			/omit-if-no-ref/
+			csi0_8bits_pins: csi-8bits-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10",
+				       "PE11";
+				function = "csi0";
+			};
+
+			/omit-if-no-ref/
+			csi0_clk_pin: csi-clk-pin {
+				pins = "PE1";
+				function = "csi0";
+			};
+
+			/omit-if-no-ref/
+			csi1_8bits_pg_pins: csi1-8bits-pg-pins {
+				pins = "PG0", "PG2", "PG3", "PG4", "PG5",
+				       "PG6", "PG7", "PG8", "PG9", "PG10",
+				       "PG11";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_24bits_ph_pins: csi1-24bits-ph-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH8", "PH9",
+				       "PH10", "PH11", "PH12", "PH13", "PH14",
+				       "PH15", "PH16", "PH17", "PH18", "PH19",
+				       "PH20", "PH21", "PH22", "PH23", "PH24",
+				       "PH25", "PH26", "PH27";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_clk_pg_pin: csi1-clk-pg-pin {
+				pins = "PG1";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			emac_pa_pins: emac-pa-pins {
+				pins = "PA0", "PA1", "PA2",
+				       "PA3", "PA4", "PA5", "PA6",
+				       "PA7", "PA8", "PA9", "PA10",
+				       "PA11", "PA12", "PA13", "PA14",
+				       "PA15", "PA16";
+				function = "emac";
+			};
+
+			/omit-if-no-ref/
+			emac_ph_pins: emac-ph-pins {
+				pins = "PH8", "PH9", "PH10", "PH11",
+				       "PH14", "PH15", "PH16", "PH17",
+				       "PH18", "PH19", "PH20", "PH21",
+				       "PH22", "PH23", "PH24", "PH25",
+				       "PH26";
+				function = "emac";
+			};
+
+			/omit-if-no-ref/
+			gmac_mii_pins: gmac-mii-pins {
+				pins = "PA0", "PA1", "PA2",
+				       "PA3", "PA4", "PA5", "PA6",
+				       "PA7", "PA8", "PA9", "PA10",
+				       "PA11", "PA12", "PA13", "PA14",
+				       "PA15", "PA16";
+				function = "gmac";
+			};
+
+			/omit-if-no-ref/
+			gmac_rgmii_pins: gmac-rgmii-pins {
+				pins = "PA0", "PA1", "PA2",
+				       "PA3", "PA4", "PA5", "PA6",
+				        "PA7", "PA8", "PA10",
+				       "PA11", "PA12", "PA13",
+				       "PA15", "PA16";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			/omit-if-no-ref/
+			i2c0_pins: i2c0-pins {
+				pins = "PB0", "PB1";
+				function = "i2c0";
+			};
+
+			/omit-if-no-ref/
+			i2c1_pins: i2c1-pins {
+				pins = "PB18", "PB19";
+				function = "i2c1";
+			};
+
+			/omit-if-no-ref/
+			i2c2_pins: i2c2-pins {
+				pins = "PB20", "PB21";
+				function = "i2c2";
+			};
+
+			/omit-if-no-ref/
+			i2c3_pins: i2c3-pins {
+				pins = "PI0", "PI1";
+				function = "i2c3";
+			};
+
+			/omit-if-no-ref/
+			ir0_rx_pin: ir0-rx-pin {
+				pins = "PB4";
+				function = "ir0";
+			};
+
+			/omit-if-no-ref/
+			ir0_tx_pin: ir0-tx-pin {
+				pins = "PB3";
+				function = "ir0";
+			};
+
+			/omit-if-no-ref/
+			ir1_rx_pin: ir1-rx-pin {
+				pins = "PB23";
+				function = "ir1";
+			};
+
+			/omit-if-no-ref/
+			ir1_tx_pin: ir1-tx-pin {
+				pins = "PB22";
+				function = "ir1";
+			};
+
+			/omit-if-no-ref/
+			lcd_lvds0_pins: lcd-lvds0-pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+				       "PD5", "PD6", "PD7", "PD8", "PD9";
+				function = "lvds0";
+			};
+
+			/omit-if-no-ref/
+			lcd_lvds1_pins: lcd-lvds1-pins {
+				pins = "PD10", "PD11", "PD12", "PD13", "PD14",
+				       "PD15", "PD16", "PD17", "PD18", "PD19";
+				function = "lvds1";
+			};
+
+			/omit-if-no-ref/
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc2_pins: mmc2-pins {
+				pins = "PC6", "PC7", "PC8",
+				       "PC9", "PC10", "PC11";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc3_pins: mmc3-pins {
+				pins = "PI4", "PI5", "PI6",
+				       "PI7", "PI8", "PI9";
+				function = "mmc3";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			ps2_0_pins: ps2-0-pins {
+				pins = "PI20", "PI21";
+				function = "ps2";
+			};
+
+			/omit-if-no-ref/
+			ps2_1_ph_pins: ps2-1-ph-pins {
+				pins = "PH12", "PH13";
+				function = "ps2";
+			};
+
+			/omit-if-no-ref/
+			pwm0_pin: pwm0-pin {
+				pins = "PB2";
+				function = "pwm";
+			};
+
+			/omit-if-no-ref/
+			pwm1_pin: pwm1-pin {
+				pins = "PI3";
+				function = "pwm";
+			};
+
+			/omit-if-no-ref/
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PB13";
+				function = "spdif";
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			spi0_pi_pins: spi0-pi-pins {
+				pins = "PI11", "PI12", "PI13";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi0_cs0_pi_pin: spi0-cs0-pi-pin {
+				pins = "PI10";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi0_cs1_pi_pin: spi0-cs1-pi-pin {
+				pins = "PI14";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi1_pi_pins: spi1-pi-pins {
+				pins = "PI17", "PI18", "PI19";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs0_pi_pin: spi1-cs0-pi-pin {
+				pins = "PI16";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi2_pb_pins: spi2-pb-pins {
+				pins = "PB15", "PB16", "PB17";
+				function = "spi2";
+			};
+
+			/omit-if-no-ref/
+			spi2_cs0_pb_pin: spi2-cs0-pb-pin {
+				pins = "PB14";
+				function = "spi2";
+			};
+
+			/omit-if-no-ref/
+			spi2_pc_pins: spi2-pc-pins {
+				pins = "PC20", "PC21", "PC22";
+				function = "spi2";
+			};
+
+			/omit-if-no-ref/
+			spi2_cs0_pc_pin: spi2-cs0-pc-pin {
+				pins = "PC19";
+				function = "spi2";
+			};
+
+			/omit-if-no-ref/
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB22", "PB23";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart0_pf_pins: uart0-pf-pins {
+				pins = "PF2", "PF4";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart1_pa_pins: uart1-pa-pins {
+				pins = "PA10", "PA11";
+				function = "uart1";
+			};
+
+			/omit-if-no-ref/
+			uart1_cts_rts_pa_pins: uart1-cts-rts-pa-pins {
+				pins = "PA12", "PA13";
+				function = "uart1";
+			};
+
+			/omit-if-no-ref/
+			uart2_pa_pins: uart2-pa-pins {
+				pins = "PA2", "PA3";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart2_cts_rts_pa_pins: uart2-cts-rts-pa-pins {
+				pins = "PA0", "PA1";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart2_pi_pins: uart2-pi-pins {
+				pins = "PI18", "PI19";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart2_cts_rts_pi_pins: uart2-cts-rts-pi-pins {
+				pins = "PI16", "PI17";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart3_pg_pins: uart3-pg-pins {
+				pins = "PG6", "PG7";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
+			uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins {
+				pins = "PG8", "PG9";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
+			uart3_ph_pins: uart3-ph-pins {
+				pins = "PH0", "PH1";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
+			uart3_cts_rts_ph_pins: uart3-cts-rts-ph-pins {
+				pins = "PH2", "PH3";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
+			uart4_pg_pins: uart4-pg-pins {
+				pins = "PG10", "PG11";
+				function = "uart4";
+			};
+
+			/omit-if-no-ref/
+			uart4_ph_pins: uart4-ph-pins {
+				pins = "PH4", "PH5";
+				function = "uart4";
+			};
+
+			/omit-if-no-ref/
+			uart5_ph_pins: uart5-ph-pins {
+				pins = "PH6", "PH7";
+				function = "uart5";
+			};
+
+			/omit-if-no-ref/
+			uart5_pi_pins: uart5-pi-pins {
+				pins = "PI10", "PI11";
+				function = "uart5";
+			};
+
+			/omit-if-no-ref/
+			uart6_pa_pins: uart6-pa-pins {
+				pins = "PA12", "PA13";
+				function = "uart6";
+			};
+
+			/omit-if-no-ref/
+			uart6_pi_pins: uart6-pi-pins {
+				pins = "PI12", "PI13";
+				function = "uart6";
+			};
+
+			/omit-if-no-ref/
+			uart7_pa_pins: uart7-pa-pins {
+				pins = "PA14", "PA15";
+				function = "uart7";
+			};
+
+			/omit-if-no-ref/
+			uart7_pi_pins: uart7-pi-pins {
+				pins = "PI20", "PI21";
+				function = "uart7";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@1c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		rtc: rtc@1c20d00 {
+			compatible = "allwinner,sun7i-a20-rtc";
+			reg = <0x01c20d00 0x20>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pwm: pwm@1c20e00 {
+			compatible = "allwinner,sun7i-a20-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma SUN4I_DMA_NORMAL 2>,
+			       <&dma SUN4I_DMA_NORMAL 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		ir0: ir@1c21800 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>;
+			clock-names = "apb", "ir";
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		ir1: ir@1c21c00 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>;
+			clock-names = "apb", "ir";
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01c21c00 0x40>;
+			status = "disabled";
+		};
+
+		i2s1: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 4>,
+			       <&dma SUN4I_DMA_NORMAL 4>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 3>,
+			       <&dma SUN4I_DMA_NORMAL 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun7i-a20-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		sid: eeprom@1c23800 {
+			compatible = "allwinner,sun7i-a20-sid";
+			reg = <0x01c23800 0x200>;
+		};
+
+		i2s2: i2s@1c24400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c24400 0x400>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 6>,
+			       <&dma SUN4I_DMA_NORMAL 6>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		rtp: rtp@1c25000 {
+			compatible = "allwinner,sun5i-a13-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@1c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@1c29800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29800 0x400>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART6>;
+			status = "disabled";
+		};
+
+		uart7: serial@1c29c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29c00 0x400>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART7>;
+			status = "disabled";
+		};
+
+		ps20: ps2@1c2a000 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a000 0x400>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_PS20>;
+			status = "disabled";
+		};
+
+		ps21: ps2@1c2a400 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a400 0x400>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_PS21>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@1c2b800 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b800 0x400>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		can0: can@1c2bc00 {
+			compatible = "allwinner,sun7i-a20-can",
+				     "allwinner,sun4i-a10-can";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_CAN>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@1c2c000 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2c000 0x400>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C4>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun7i-a20-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_GPU>;
+
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <384000000>;
+		};
+
+		gmac: ethernet@1c50000 {
+			compatible = "allwinner,sun7i-a20-gmac";
+			reg = <0x01c50000 0x10000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_AHB_GMAC>, <&gmac_tx_clk>;
+			clock-names = "stmmaceth", "allwinner_gmac_tx";
+			snps,pbl = <2>;
+			snps,fixed-burst;
+			snps,force_sf_dma_mode;
+			status = "disabled";
+
+			gmac_mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		hstimer@1c60000 {
+			compatible = "allwinner,sun7i-a20-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_HSTIMER>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		fe0: display-frontend@1e00000 {
+			compatible = "allwinner,sun7i-a20-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>,
+				 <&ccu CLK_DRAM_DE_FE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+
+					fe0_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe0>;
+					};
+				};
+			};
+		};
+
+		fe1: display-frontend@1e20000 {
+			compatible = "allwinner,sun7i-a20-display-frontend";
+			reg = <0x01e20000 0x20000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>,
+				 <&ccu CLK_DRAM_DE_FE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe1_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe1>;
+					};
+
+					fe1_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe1>;
+					};
+				};
+			};
+		};
+
+		be1: display-backend@1e40000 {
+			compatible = "allwinner,sun7i-a20-display-backend";
+			reg = <0x01e40000 0x10000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>,
+				 <&ccu CLK_DRAM_DE_BE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be1_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be1>;
+					};
+
+					be1_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be1>;
+					};
+				};
+
+				be1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be1_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be1>;
+					};
+
+					be1_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_be1>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			compatible = "allwinner,sun7i-a20-display-backend";
+			reg = <0x01e60000 0x10000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_DRAM_DE_BE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+
+					be0_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be0>;
+					};
+
+					be0_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_be0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a23-a33.dtsi
new file mode 100644
index 000000000000..2af8382ccdf5
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-a33.dtsi
@@ -0,0 +1,855 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
+#include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		simplefb_lcd: framebuffer-lcd0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&ccu CLK_BUS_LCD>, <&ccu CLK_BUS_DE_BE>,
+				 <&ccu CLK_LCD_CH0>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_DRC>;
+			status = "disabled";
+		};
+	};
+
+	de: display-engine {
+		/* compatible gets set in SoC specific dtsi file */
+		allwinner,pipelines = <&fe0>;
+		status = "disabled";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	cpus {
+		enable-method = "allwinner,sun8i-a23";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		ext_osc32k: ext-osc32k-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <50000>;
+			clock-output-names = "ext-osc32k";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		system-control@1c00000 {
+			compatible = "allwinner,sun8i-a23-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0x80000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0x80000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun8i-a23-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-a23-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		nfc: nand-controller@1c03000 {
+			compatible = "allwinner,sun8i-a23-nand-controller";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_NAND>;
+			reset-names = "ahb";
+			dmas = <&dma 5>;
+			dma-names = "rxtx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma 12>;
+			clocks = <&ccu CLK_BUS_LCD>,
+				 <&ccu CLK_LCD_CH0>,
+				 <&ccu 13>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "lvds-alt";
+			clock-output-names = "tcon-data-clock";
+			#clock-cells = <0>;
+			resets = <&ccu RST_BUS_LCD>,
+				 <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd",
+				      "lvds";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_drc0: endpoint {
+						remote-endpoint = <&drc0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c19000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			/*
+			 * compatible and address regions get set in
+			 * SoC specific dtsi file
+			 */
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@1c1a000 {
+			compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI>;
+			resets = <&ccu RST_BUS_EHCI>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c1a400 {
+			compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>;
+			resets = <&ccu RST_BUS_OHCI>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01c20800 0x400>;
+			interrupt-parent = <&r_intc>;
+			/* interrupts get set in SoC specific dtsi file */
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			i2c0_pins: i2c0-pins {
+				pins = "PH2", "PH3";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PH4", "PH5";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PE12", "PE13";
+				function = "i2c2";
+			};
+
+			lcd_rgb666_pins: lcd-rgb666-pins {
+				pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+				       "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+				       "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+				       "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pg_pins: mmc1-pg-pins {
+				pins = "PG0", "PG1", "PG2",
+				       "PG3", "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_pins: mmc2-8bit-pins {
+				pins = "PC5", "PC6", "PC8",
+				       "PC9", "PC10", "PC11",
+				       "PC12", "PC13", "PC14",
+				       "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			nand_pins: nand-pins {
+				pins = "PC0", "PC1", "PC2", "PC5",
+				       "PC8", "PC9", "PC10", "PC11",
+				       "PC12", "PC13", "PC14", "PC15";
+				function = "nand0";
+			};
+
+			nand_cs0_pin: nand-cs0-pin {
+				pins = "PC4";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			nand_cs1_pin: nand-cs1-pin {
+				pins = "PC3";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			nand_rb0_pin: nand-rb0-pin {
+				pins = "PC6";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			nand_rb1_pin: nand-rb1-pin {
+				pins = "PC7";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			pwm0_pin: pwm0-pin {
+				pins = "PH0";
+				function = "pwm0";
+			};
+
+			uart0_pf_pins: uart0-pf-pins {
+				pins = "PF2", "PF4";
+				function = "uart0";
+			};
+
+			uart1_pg_pins: uart1-pg-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_cts_rts_pg_pins: uart1-cts-rts-pg-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun8i-a23-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt0: watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun7i-a20-pwm";
+			reg = <0x01c21400 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			dmas = <&dma 9>, <&dma 9>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			dmas = <&dma 10>, <&dma 10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun8i-a23-mali",
+				     "allwinner,sun7i-a20-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+			#cooling-cells = <2>;
+
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <384000000>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		fe0: display-frontend@1e00000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01e00000 0x20000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>,
+				 <&ccu CLK_DRAM_DE_FE>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_BUS_DE_FE>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					reg = <1>;
+
+					fe0_out_be0: endpoint {
+						remote-endpoint = <&be0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01e60000 0x10000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_DRAM_DE_BE>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_BUS_DE_BE>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					reg = <0>;
+
+					be0_in_fe0: endpoint {
+						remote-endpoint = <&fe0_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					reg = <1>;
+
+					be0_out_drc0: endpoint {
+						remote-endpoint = <&drc0_in_be0>;
+					};
+				};
+			};
+		};
+
+		drc0: drc@1e70000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01e70000 0x10000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>,
+				 <&ccu CLK_DRAM_DRC>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_DRC>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc0_in: port@0 {
+					reg = <0>;
+
+					drc0_in_be0: endpoint {
+						remote-endpoint = <&be0_out_drc0>;
+					};
+				};
+
+				drc0_out: port@1 {
+					reg = <1>;
+
+					drc0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_drc0>;
+					};
+				};
+			};
+		};
+
+		rtc: rtc@1f00000 {
+			compatible = "allwinner,sun8i-a23-rtc";
+			reg = <0x01f00000 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out";
+			clocks = <&ext_osc32k>;
+			#clock-cells = <1>;
+		};
+
+		r_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x01f00c00 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		prcm@1f01400 {
+			compatible = "allwinner,sun8i-a23-prcm";
+			reg = <0x01f01400 0x200>;
+
+			ar100: ar100-clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&osc24M>;
+				clock-output-names = "ar100";
+			};
+
+			ahb0: ahb0-clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&ar100>;
+				clock-output-names = "ahb0";
+			};
+
+			apb0: apb0-clk {
+				compatible = "allwinner,sun8i-a23-apb0-clk";
+				#clock-cells = <0>;
+				clocks = <&ahb0>;
+				clock-output-names = "apb0";
+			};
+
+			apb0_gates: apb0-gates-clk {
+				compatible = "allwinner,sun8i-a23-apb0-gates-clk";
+				#clock-cells = <1>;
+				clocks = <&apb0>;
+				clock-output-names = "apb0_pio", "apb0_timer",
+						"apb0_rsb", "apb0_uart",
+						"apb0_i2c";
+			};
+
+			apb0_rst: apb0-rst {
+				compatible = "allwinner,sun6i-a31-clock-reset";
+				#reset-cells = <1>;
+			};
+
+			codec_analog: codec-analog {
+				compatible = "allwinner,sun8i-a23-codec-analog";
+			};
+		};
+
+		cpucfg@1f01c00 {
+			compatible = "allwinner,sun8i-a23-cpuconfig";
+			reg = <0x01f01c00 0x300>;
+		};
+
+		r_uart: serial@1f02800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01f02800 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb0_gates 4>;
+			resets = <&apb0_rst 4>;
+			status = "disabled";
+		};
+
+		r_i2c: i2c@1f02400 {
+			compatible = "allwinner,sun8i-a23-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01f02400 0x400>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c_pins>;
+			clocks = <&apb0_gates 6>;
+			resets = <&apb0_rst 6>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_pio: pinctrl@1f02c00 {
+			compatible = "allwinner,sun8i-a23-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			r_i2c_pins: r-i2c-pins {
+				pins = "PL0", "PL1";
+				function = "s_i2c";
+				bias-pull-up;
+			};
+
+			r_rsb_pins: r-rsb-pins {
+				pins = "PL0", "PL1";
+				function = "s_rsb";
+				drive-strength = <20>;
+				bias-pull-up;
+			};
+
+			r_uart_pins_a: r-uart-pins {
+				pins = "PL2", "PL3";
+				function = "s_uart";
+			};
+		};
+
+		r_rsb: rsb@1f03400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 3>;
+			clock-frequency = <3000000>;
+			resets = <&apb0_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-a23-evb.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-evb.dts
index 87289a60c520..53fb1be0401a 100644
--- a/arch/arm/boot/dts/sun8i-a23-evb.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-evb.dts
@@ -65,14 +65,10 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
@@ -80,21 +76,21 @@
 	vref-supply = <&reg_vcc3v0>;
 	status = "okay";
 
-	button@190 {
+	button-190 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <190000>;
 	};
 
-	button@390 {
+	button-390 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
 		voltage = <390000>;
 	};
 
-	button@600 {
+	button-600 {
 		label = "Home";
 		linux,code = <KEY_HOME>;
 		channel = <0>;
@@ -103,23 +99,12 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_evb>;
 	vmmc-supply = <&reg_vcc3v0>;
 	bus-width = <4>;
-	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-	cd-inverted;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
 	status = "okay";
 };
 
-&pio {
-	mmc0_cd_pin_evb: mmc0_cd_pin@0 {
-		pins = "PB4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 /*
  * The RX line has a non-populated resistance. In order to use it, you
  * need to solder R207 on the back of the board in order to close the
diff --git a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-gt90h-v4.dts
index e3c7a25ca37d..bcbc9b0758f9 100644
--- a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-gt90h-v4.dts
@@ -63,7 +63,7 @@
 };
 
 &lradc {
-	button@600 {
+	button-600 {
 		label = "Back";
 		linux,code = <KEY_BACK>;
 		channel = <0>;
diff --git a/arch/arm/boot/dts/sun8i-a23-inet86dz.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-inet86dz.dts
index d4405752a414..d4405752a414 100644
--- a/arch/arm/boot/dts/sun8i-a23-inet86dz.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-inet86dz.dts
diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v1.2.dts
index c2f22fc33811..c2f22fc33811 120000
--- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v1.2.dts
diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v5.dts
index c2f22fc33811..c2f22fc33811 120000
--- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v5.dts
diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts
index 649e31339662..0c585a6d990d 100644
--- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts
@@ -52,10 +52,8 @@
 		ethernet0 = &esp8089;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_pwrseq_pin_mid2407>;
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
 		/* The esp8089 needs 200 ms after driving wifi-en high */
 		post-power-on-delay-ms = <200>;
@@ -71,31 +69,20 @@
 
 &mmc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>;
+	pinctrl-0 = <&mmc1_pg_pins>;
 	vmmc-supply = <&reg_dldo1>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
 	non-removable;
 	status = "okay";
 
-	esp8089: sdio_wifi@1 {
+	esp8089: wifi@1 {
 		compatible = "esp,esp8089";
 		reg = <1>;
 		esp,crystal-26M-en = <2>;
 	};
 };
 
-&mmc1_pins_a {
-	bias-pull-up;
-};
-
-&r_pio {
-	wifi_pwrseq_pin_mid2407: wifi_pwrseq_pin@0 {
-		pins = "PL6";
-		function = "gpio_out";
-	};
-};
-
 &touchscreen {
 	reg = <0x40>;
 	compatible = "silead,gsl1680";
diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts
index 6b3bcae089f2..63cb4e194a03 100644
--- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts
@@ -52,10 +52,8 @@
 		ethernet0 = &esp8089;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_pwrseq_pin_mid2809>;
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
 		/* The esp8089 needs 200 ms after driving wifi-en high */
 		post-power-on-delay-ms = <200>;
@@ -64,31 +62,20 @@
 
 &mmc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>;
+	pinctrl-0 = <&mmc1_pg_pins>;
 	vmmc-supply = <&reg_dldo1>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
 	non-removable;
 	status = "okay";
 
-	esp8089: sdio_wifi@1 {
+	esp8089: wifi@1 {
 		compatible = "esp,esp8089";
 		reg = <1>;
 		esp,crystal-26M-en = <2>;
 	};
 };
 
-&mmc1_pins_a {
-	bias-pull-up;
-};
-
-&r_pio {
-	wifi_pwrseq_pin_mid2809: wifi_pwrseq_pin@0 {
-		pins = "PL6";
-		function = "gpio_out";
-	};
-};
-
 &touchscreen {
 	reg = <0x40>;
 	compatible = "silead,gsl3670";
diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-q8-tablet.dts
index b6958e8f2f01..51097c77a152 100644
--- a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-q8-tablet.dts
@@ -61,3 +61,13 @@
 		"Headset Mic", "HBIAS";
 	status = "okay";
 };
+
+&panel {
+	compatible = "bananapi,s070wv20-ct16";
+};
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint {
+		remote-endpoint = <&panel_input>;
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a23.dtsi
index 4d1f929780a8..a5e884a8b2ae 100644
--- a/arch/arm/boot/dts/sun8i-a23.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23.dtsi
@@ -45,12 +45,8 @@
 #include "sun8i-a23-a33.dtsi"
 
 / {
-	memory {
-		reg = <0x40000000 0x40000000>;
-	};
-
-	soc@01c00000 {
-		codec: codec@01c22c00 {
+	soc {
+		codec: codec@1c22c00 {
 			#sound-dai-cells = <0>;
 			compatible = "allwinner,sun8i-a23-codec";
 			reg = <0x01c22c00 0x400>;
@@ -66,10 +62,26 @@
 	};
 };
 
+&be0 {
+	compatible = "allwinner,sun8i-a23-display-backend";
+};
+
 &ccu {
 	compatible = "allwinner,sun8i-a23-ccu";
 };
 
+&de {
+	compatible = "allwinner,sun8i-a23-display-engine";
+};
+
+&drc0 {
+	compatible = "allwinner,sun8i-a23-drc";
+};
+
+&fe0 {
+	compatible = "allwinner,sun8i-a23-display-frontend";
+};
+
 &pio {
 	compatible = "allwinner,sun8i-a23-pinctrl";
 	interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
@@ -77,6 +89,10 @@
 		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 };
 
+&tcon0 {
+	compatible = "allwinner,sun8i-a23-tcon";
+};
+
 &usb_otg {
 	compatible = "allwinner,sun6i-a31-musb";
 };
diff --git a/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-et-q8-v1.6.dts
index 4519fd791a8f..4519fd791a8f 120000
--- a/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-et-q8-v1.6.dts
diff --git a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-ga10h-v1.1.dts
index f71159987cac..f00ce03ffc84 100644
--- a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-ga10h-v1.1.dts
@@ -69,7 +69,7 @@
 };
 
 &lradc {
-	button@600 {
+	button-600 {
 		label = "Back";
 		linux,code = <KEY_BACK>;
 		channel = <0>;
@@ -79,13 +79,13 @@
 
 &mmc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>;
+	pinctrl-0 = <&mmc1_pg_pins>;
 	vmmc-supply = <&reg_dldo1>;
 	bus-width = <4>;
 	non-removable;
 	status = "okay";
 
-	rtl8703as: sdio_wifi@1 {
+	rtl8703as: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-inet-d978-rev2.dts
index 3e05959104f1..162ba93f7484 100644
--- a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-inet-d978-rev2.dts
@@ -63,32 +63,28 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pin_d978>;
 
-		home {
+		led {
 			label = "d978:blue:home";
 			gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
 		};
 	};
 };
 
-&mmc1_pins_a {
-	bias-pull-up;
-};
-
 &mmc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>;
+	pinctrl-0 = <&mmc1_pg_pins>;
 	vmmc-supply = <&reg_dldo1>;
 	bus-width = <4>;
 	non-removable;
 	status = "okay";
 
-	rtl8723bs: sdio_wifi@1 {
+	rtl8723bs: wifi@1 {
 		reg = <1>;
 	};
 };
 
 &r_pio {
-	led_pin_d978: led_pin_d978@0 {
+	led_pin_d978: led-pin {
 		pins = "PL5";
 		function = "gpio_out";
 		drive-strength = <20>;
@@ -101,7 +97,7 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_a>,
-		    <&uart1_pins_cts_rts_a>;
+	pinctrl-0 = <&uart1_pg_pins>,
+		    <&uart1_cts_rts_pg_pins>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-ippo-q8h-v1.2.dts
index 4519fd791a8f..4519fd791a8f 120000
--- a/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-ippo-q8h-v1.2.dts
diff --git a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-olinuxino.dts
index be9a6b8d7a1e..6fee8f133508 100644
--- a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-olinuxino.dts
@@ -43,7 +43,6 @@
 
 /dts-v1/;
 #include "sun8i-a33.dtsi"
-#include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -62,27 +61,30 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_olinuxino>;
 
-		green {
+		led {
 			label = "a33-olinuxino:green:usr";
 			gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
 		};
 	};
 };
 
+&codec {
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
-	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-	cd-inverted;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
 	status = "okay";
 };
 
@@ -90,31 +92,14 @@
 	status = "okay";
 };
 
-&pio {
-	led_pin_olinuxino: led_pins@0 {
-		pins = "PB7";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
-		pins = "PB4";
-		function = "gpio_in";
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PB3";
-		function = "gpio_in";
-	};
-};
-
 &r_rsb {
 	status = "okay";
 
 	axp22x: pmic@3a3 {
 		compatible = "x-powers,axp223";
 		reg = <0x3a3>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 		x-powers,drive-vbus-en;
 	};
@@ -122,6 +107,14 @@
 
 #include "axp223.dtsi"
 
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
 &reg_aldo1 {
 	regulator-always-on;
 	regulator-min-microvolt = <3300000>;
@@ -195,9 +188,24 @@
 	vcc-lcd-supply = <&reg_dc1sw>;
 };
 
+&sound {
+	/* Board level jack widgets */
+	simple-audio-card,widgets = "Microphone", "Microphone Jack",
+				    "Headphone", "Headphone Jack";
+	/* Board level routing. First 2 routes copied from SoC level */
+	simple-audio-card,routing =
+		"Left DAC", "DACL",
+		"Right DAC", "DACR",
+		"HP", "HPCOM",
+		"Headphone Jack", "HP",
+		"MIC1", "Microphone Jack",
+		"Microphone Jack", "MBIAS";
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_b>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -211,8 +219,6 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
 	usb0_id_det-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_drivevbus>;
diff --git a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-q8-tablet.dts
index b0bc2360f8c4..9c5750c25613 100644
--- a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-q8-tablet.dts
@@ -48,3 +48,10 @@
 	model = "Q8 A33 Tablet";
 	compatible = "allwinner,q8-a33", "allwinner,sun8i-a33";
 };
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&panel_input>;
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-sinlinx-sina33.dts
index 433cf2a2a9a2..0c82ff3c7cb4 100644
--- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-sinlinx-sina33.dts
@@ -63,16 +63,10 @@
 
 	panel {
 		compatible = "netron-dy,e231732";
-		#address-cells = <1>;
-		#size-cells = <0>;
+		power-supply = <&reg_vcc3v3>;
 
-		port@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			panel_input: endpoint@0 {
-				reg = <0>;
+		port {
+			panel_input: endpoint {
 				remote-endpoint = <&tcon0_out_panel>;
 			};
 		};
@@ -117,21 +111,21 @@
 	vref-supply = <&reg_dcdc1>;
 	status = "okay";
 
-	button@200 {
+	button-200 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <191011>;
 	};
 
-	button@400 {
+	button-400 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
 		voltage = <391304>;
 	};
 
-	button@600 {
+	button-600 {
 		label = "Home";
 		linux,code = <KEY_HOME>;
 		channel = <0>;
@@ -140,12 +134,9 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
-	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-	cd-inverted;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
 	status = "okay";
 };
 
@@ -162,30 +153,20 @@
 &mmc2_8bit_pins {
 	/* Increase drive strength for DDR modes */
 	drive-strength = <40>;
-	/* eMMC is missing pull-ups */
-	bias-pull-up;
 };
 
 &ohci0 {
 	status = "okay";
 };
 
-&pio {
-	mmc0_cd_pin_sina33: mmc0_cd_pin@0 {
-		pins = "PB4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &r_rsb {
 	status = "okay";
 
 	axp22x: pmic@3a3 {
 		compatible = "x-powers,axp223";
 		reg = <0x3a3>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 	};
 };
@@ -279,7 +260,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_b>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-vstar-core1.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a33-vstar-core1.dtsi
new file mode 100644
index 000000000000..ba794b842ec4
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-vstar-core1.dtsi
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+#include "sun8i-a33.dtsi"
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp223.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-vstar.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-vstar.dts
new file mode 100644
index 000000000000..9f5c29b3df46
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-vstar.dts
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "sun8i-a33-vstar-core1.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Rervision A33-Vstar";
+	compatible = "rervision,a33-vstar",
+		     "rervision,a33-core1",
+		     "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &r8152;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub@1 {
+		/* Onboard GL850G hub which needs no extra power sequence */
+		compatible = "usb5e3,608";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		r8152: ethernet@4 {
+			/*
+			 * Onboard Realtek RTL8152 USB Ethernet,
+			 * with no MAC address programmed
+			 */
+			compatible = "usbbda,8152";
+			reg = <4>;
+		};
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-191 {
+		label = "V+";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191011>;
+	};
+
+	button-391 {
+		label = "V-";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <391304>;
+	};
+
+	button-600 {
+		label = "BACK";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+		interrupt-names = "host-wake";
+	};
+};
+
+/*
+ * Our WiFi chip needs both DLDO1 and DLDO2 to be powered at the same
+ * time, with the two being in sync. Since this is not really
+ * supported right now, just use the two as always on, and we will fix
+ * it later.
+ */
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi0";
+};
+
+&reg_dldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi1";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&sound {
+	/* TODO: on-board microphone */
+
+	simple-audio-card,widgets = "Headphone", "Headphone Jack";
+	simple-audio-card,routing =
+		"Left DAC", "DACL",
+		"Right DAC", "DACR",
+		"Headphone Jack", "HP";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo1>;
+		device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+		host-wakeup-gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		shutdown-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a33.dtsi
new file mode 100644
index 000000000000..36b2d78cdab9
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33.dtsi
@@ -0,0 +1,432 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-a23-a33.dtsi"
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	cpu0_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-240000000 {
+			opp-hz = /bits/ 64 <240000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-504000000 {
+			opp-hz = /bits/ 64 <504000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-648000000 {
+			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <1200000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1200000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
+	cpus {
+		cpu@0 {
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&ths>;
+	};
+
+	mali_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-144000000 {
+			opp-hz = /bits/ 64 <144000000>;
+		};
+
+		opp-240000000 {
+			opp-hz = /bits/ 64 <240000000>;
+		};
+
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+		};
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sun8i-a33-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&link_codec>;
+		simple-audio-card,bitclock-master = <&link_codec>;
+		simple-audio-card,mclk-fs = <128>;
+		simple-audio-card,aux-devs = <&codec_analog>;
+		simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR";
+		status = "disabled";
+
+		simple-audio-card,cpu {
+			sound-dai = <&dai>;
+		};
+
+		link_codec: simple-audio-card,codec {
+			sound-dai = <&codec 0>;
+		};
+	};
+
+	soc {
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun8i-a33-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		crypto: crypto-engine@1c15000 {
+			compatible = "allwinner,sun8i-a33-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SS>;
+			reset-names = "ahb";
+		};
+
+		dai: dai@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-i2s";
+			reg = <0x01c22c00 0x200>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		codec: codec@1c22e00 {
+			#sound-dai-cells = <1>;
+			compatible = "allwinner,sun8i-a33-codec";
+			reg = <0x01c22e00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "bus", "mod";
+			status = "disabled";
+		};
+
+		ths: ths@1c25000 {
+			compatible = "allwinner,sun8i-a33-ths";
+			reg = <0x01c25000 0x100>;
+			#thermal-sensor-cells = <0>;
+			#io-channel-cells = <0>;
+		};
+
+		dsi: dsi@1ca0000 {
+			compatible = "allwinner,sun6i-a31-mipi-dsi";
+			reg = <0x01ca0000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&ccu CLK_DSI_SCLK>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			phys = <&dphy>;
+			phy-names = "dphy";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port {
+				dsi_in_tcon0: endpoint {
+					remote-endpoint = <&tcon0_out_dsi>;
+				};
+			};
+		};
+
+		dphy: d-phy@1ca1000 {
+			compatible = "allwinner,sun6i-a31-mipi-dphy";
+			reg = <0x01ca1000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&ccu CLK_DSI_DPHY>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&ths>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map2 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&mali 1 THERMAL_NO_LIMIT>;
+				};
+
+				map3 {
+					trip = <&gpu_alert1>;
+					cooling-device = <&mali 2 THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu-alert0 {
+					/* milliCelsius */
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_alert0: gpu-alert0 {
+					/* milliCelsius */
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_alert1: cpu-alert1 {
+					/* milliCelsius */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpu_alert1: gpu-alert1 {
+					/* milliCelsius */
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_crit: cpu-crit {
+					/* milliCelsius */
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&be0 {
+	compatible = "allwinner,sun8i-a33-display-backend";
+	/* A33 has an extra "SAT" module packed inside the display backend */
+	reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
+	reg-names = "be", "sat";
+	clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
+		 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>;
+	clock-names = "ahb", "mod",
+		      "ram", "sat";
+	resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
+	reset-names = "be", "sat";
+};
+
+&ccu {
+	compatible = "allwinner,sun8i-a33-ccu";
+};
+
+&de {
+	compatible = "allwinner,sun8i-a33-display-engine";
+};
+
+&drc0 {
+	compatible = "allwinner,sun8i-a33-drc";
+};
+
+&fe0 {
+	compatible = "allwinner,sun8i-a33-display-frontend";
+};
+
+&mali {
+	operating-points-v2 = <&mali_opp_table>;
+};
+
+&pio {
+	compatible = "allwinner,sun8i-a33-pinctrl";
+	interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+
+	uart0_pb_pins: uart0-pb-pins {
+		pins = "PB0", "PB1";
+		function = "uart0";
+	};
+
+};
+
+&tcon0 {
+	compatible = "allwinner,sun8i-a33-tcon";
+};
+
+&tcon0_out {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	tcon0_out_dsi: endpoint@1 {
+		reg = <1>;
+		remote-endpoint = <&dsi_in_tcon0>;
+	};
+};
+
+&usb_otg {
+	compatible = "allwinner,sun8i-a33-musb";
+};
+
+&usbphy {
+	compatible = "allwinner,sun8i-a33-usb-phy";
+	reg = <0x01c19400 0x14>, <0x01c1a800 0x4>;
+	reg-names = "phy_ctrl", "pmu1";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-allwinner-h8homlet-v2.dts
new file mode 100644
index 000000000000..c31c97d16024
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-allwinner-h8homlet-v2.dts
@@ -0,0 +1,281 @@
+/*
+ * Copyright 2015 Vishnu Patekar
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Allwinner A83T H8Homlet Proto Dev Board v2.0";
+	compatible = "allwinner,h8homlet-v2", "allwinner,sun8i-a83t";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_usb0_vbus: reg-usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+	};
+
+	reg_usb1_vbus: reg-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp81x: pmic@3a3 {
+		compatible = "x-powers,axp818", "x-powers,axp813";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		swin-supply = <&reg_dcdc1>;
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+};
+
+#include "axp81x.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dram-pll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpua";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpub";
+};
+
+&reg_dcdc4 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo4 {
+	/*
+	 * The PHY requires 20ms after all voltages are applied until core
+	 * logic is ready and 30ms after the reset pin is de-asserted.
+	 * Set a 100ms delay to account for PMIC ramp time and board traces.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-ephy";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1080000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd12-hsic";
+};
+
+&reg_fldo2 {
+	/*
+	 * Despite the embedded CPUs core not being used in any way,
+	 * this must remain on or the system will hang.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&reg_sw {
+	regulator-name = "vcc-wifi";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-bananapi-m3.dts
new file mode 100644
index 000000000000..32e811fa23e2
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-bananapi-m3.dts
@@ -0,0 +1,422 @@
+/*
+ * Copyright 2017 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Banana Pi BPI-M3";
+	compatible = "sinovoip,bpi-m3", "allwinner,sun8i-a83t";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bananapi-m3:blue:usr";
+			gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "bananapi-m3:green:usr";
+			gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb1_vbus: reg-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+		/* The WiFi low power clock must be 32768 Hz */
+		assigned-clocks = <&ac100_rtc 1>;
+		assigned-clock-rates = <32768>;
+		/* enables internal regulator and de-asserts reset */
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+	};
+
+	/*
+	 * Power supply for the SATA disk, behind a USB-SATA bridge.
+	 * Since it is a USB device, there is no consumer in the DT, so we
+	 * have to keep this always on.
+	 */
+	regulator-sata-disk-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "sata-disk-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	/* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */
+	status = "okay";
+
+	/* TODO GL830 USB-to-SATA bridge downstream w/ GPIO power controls */
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_sw>;
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-id";
+	allwinner,rx-delay-ps = <700>;
+	allwinner,tx-delay-ps = <700>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&r_cir {
+	clock-frequency = <3000000>;
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp81x: pmic@3a3 {
+		compatible = "x-powers,axp813";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		fldoin-supply = <&reg_dcdc5>;
+		swin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+};
+
+#include "axp81x.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dram-pll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	/* schematics says 3.1V but FEX file says 3.3V */
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpua";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpub";
+};
+
+&reg_dcdc4 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	/*
+	 * This powers both the WiFi/BT module's main power, I/O supply,
+	 * and external pull-ups on all the data lines. It should be set
+	 * to the same voltage as the I/O supply (DCDC1 in this case) to
+	 * avoid any leakage or mismatch.
+	 */
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pd";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1080000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd12-hsic";
+};
+
+&reg_fldo2 {
+	/*
+	 * Despite the embedded CPUs core not being used in any way,
+	 * this must remain on or the system will hang.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&reg_sw {
+	/*
+	 * The PHY requires 20ms after all voltages
+	 * are applied until core logic is ready and
+	 * 30ms after the reset pin is de-asserted.
+	 * Set a 100ms delay to account for PMIC
+	 * ramp time and board traces.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+	regulator-name = "vcc-ephy";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo1>;
+		vddio-supply = <&reg_dldo1>;
+		device-wakeup-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+		host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+		shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-cubietruck-plus.dts
new file mode 100644
index 000000000000..d5e6ddaffbce
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-cubietruck-plus.dts
@@ -0,0 +1,464 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Cubietech Cubietruck Plus";
+	compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "cubietruck-plus:blue:usr";
+			gpios = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
+		};
+
+		led-1 {
+			label = "cubietruck-plus:orange:usr";
+			gpios = <&pio 3 26 GPIO_ACTIVE_HIGH>; /* PD26 */
+		};
+
+		led-2 {
+			label = "cubietruck-plus:white:usr";
+			gpios = <&pio 3 27 GPIO_ACTIVE_HIGH>; /* PD27 */
+		};
+
+		led-3 {
+			label = "cubietruck-plus:green:usr";
+			gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */
+		};
+	};
+
+	usb-hub {
+		/* I2C is not connected */
+		compatible = "smsc,usb3503";
+		initial-mode = <1>; /* initialize in HUB mode */
+		disabled-ports = <1>;
+		intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+		reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
+		connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+		refclk-frequency = <19200000>;
+	};
+
+	reg_usb1_vbus: reg-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 3 29 GPIO_ACTIVE_HIGH>; /* PD29 */
+	};
+
+	reg_usb2_vbus: reg-usb2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb2-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+		/* The WiFi low power clock must be 32768 Hz */
+		assigned-clocks = <&ac100_rtc 1>;
+		assigned-clock-rates = <32768>;
+		/* enables internal regulator and de-asserts reset */
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	/* GL830 USB-to-SATA bridge here */
+	status = "okay";
+};
+
+&ehci1 {
+	/* USB3503 HSIC USB 2.0 hub here */
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_dldo4>;
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_sw>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp81x: pmic@3a3 {
+		compatible = "x-powers,axp818", "x-powers,axp813";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		swin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+};
+
+#include "axp81x.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dram-pll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	/*
+	 * The schematics say this should be 3.3V, but the FEX file says
+	 * it should be 3V. The latter makes sense, as the WiFi module's
+	 * I/O is indirectly powered from DCDC1, through SW. It is rated
+	 * at 2.98V maximum.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpua";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpub";
+};
+
+&reg_dcdc4 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "dp-pwr";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "ephy-io";
+};
+
+&reg_dldo4 {
+	/*
+	 * The PHY requires 20ms after all voltages are applied until core
+	 * logic is ready and 30ms after the reset pin is de-asserted.
+	 * Set a 100ms delay to account for PMIC ramp time and board traces.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "ephy";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "dp-bridge-1";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "dp-bridge-2";
+};
+
+&reg_fldo1 {
+	/* TODO should be handled by USB PHY */
+	regulator-always-on;
+	regulator-min-microvolt = <1080000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd12-hsic";
+};
+
+&reg_fldo2 {
+	/*
+	 * Despite the embedded CPUs core not being used in any way,
+	 * this must remain on or the system will hang.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&reg_sw {
+	regulator-name = "vcc-wifi-io";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dcdc1>;
+		vddio-supply = <&reg_sw>;
+		device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+		host-wakeup-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts
new file mode 100644
index 000000000000..43982b106a4d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts
@@ -0,0 +1,506 @@
+/*
+ * Copyright (C) 2017 Touchless Biometric Systems AG
+ * Tomas Novotny <tomas@novotny.cz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "TBS A711 Tablet";
+	compatible = "tbs-biometrics,a711", "allwinner,sun8i-a83t";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		enable-gpios = <&pio 3 29 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_sw>;
+		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
+		default-brightness-level = <9>;
+	};
+
+	panel {
+		compatible = "tbs,a711-panel", "panel-lvds";
+		backlight = <&backlight>;
+		power-supply = <&reg_sw>;
+
+		width-mm = <153>;
+		height-mm = <90>;
+		data-mapping = "vesa-24";
+
+		panel-timing {
+			/* 1024x600 @60Hz */
+			clock-frequency = <52000000>;
+			hactive = <1024>;
+			vactive = <600>;
+			hsync-len = <20>;
+			hfront-porch = <180>;
+			hback-porch = <160>;
+			vfront-porch = <12>;
+			vback-porch = <23>;
+			vsync-len = <5>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&tcon0_out_lcd>;
+			};
+		};
+	};
+
+	reg_gps: reg-gps {
+		compatible = "regulator-fixed";
+		regulator-name = "gps";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	reg_vbat: reg-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	reg_vmain: reg-vmain {
+		compatible = "regulator-fixed";
+		regulator-name = "vmain";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vbat>;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+
+		/*
+		 * This is actually Bluetooth's clock, but we have to
+		 * hook it up somewheere
+		 */
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+	status = "okay";
+};
+
+/*
+ * An USB-2 hub is connected here, which also means we don't need to
+ * enable the OHCI controller.
+ */
+&ehci0 {
+	status = "okay";
+};
+
+/*
+ * There's a modem connected here that needs to be initialised before
+ * being able to be enumerated.
+ */
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5206";
+		reg = <0x38>;
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>; /* PL7 */
+		reset-gpios = <&pio 3 5 GPIO_ACTIVE_LOW>; /* PD5 */
+		vcc-supply = <&reg_ldo_io0>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	accelerometer@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 10 IRQ_TYPE_EDGE_RISING>; /* PH10 / EINT10 */
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc1 {
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_dldo1>;
+	non-removable;
+	wakeup-source;
+	keep-power-in-suspend;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 WL_WAKE_UP */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pin>;
+	status = "okay";
+};
+
+&r_lradc {
+	vref-supply = <&reg_aldo2>;
+	status = "okay";
+
+	button-210 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <210000>;
+	};
+
+	button-410 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <410000>;
+	};
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp81x: pmic@3a3 {
+		compatible = "x-powers,axp813";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		swin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 12 IRQ_TYPE_LEVEL_LOW>; /* PL12 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+
+};
+
+#include "axp81x.dtsi"
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1.8";
+};
+
+&reg_aldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+	regulator-name = "vdd-drampll";
+};
+
+&reg_aldo3 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-always-on;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-always-on;
+	regulator-name = "vcc-io";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-always-on;
+	regulator-name = "vdd-cpu-A";
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-always-on;
+	regulator-name = "vdd-cpu-B";
+};
+
+&reg_dcdc4 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-always-on;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-always-on;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <4200000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-csi-r";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-dsi";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-csi-f";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-hsic";
+};
+
+&reg_fldo2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-always-on;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-name = "vcc-ctp";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-name = "vcc-vb";
+	status = "okay";
+};
+
+&reg_sw {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-name = "vcc-lcd";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_lvds_pins>;
+};
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint {
+		remote-endpoint = <&panel_input>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+/* There's the BT part of the AP6210 connected to that UART */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm20702a1";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vbat>;
+		vddio-supply = <&reg_dldo1>;
+		device-wakeup-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+		host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+		shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+		max-speed = <1500000>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pb_pins>;
+	status = "okay";
+
+	gnss {
+		compatible = "u-blox,neo-6m";
+
+		v-bckp-supply = <&reg_rtc_ldo>;
+		vcc-supply = <&reg_gps>;
+		current-speed = <9600>;
+	};
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 11 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH11 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_vmain>;
+	usb2_vbus-supply = <&reg_vmain>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
new file mode 100644
index 000000000000..6f88d8764e6a
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
@@ -0,0 +1,1274 @@
+/*
+ * Copyright 2015 Vishnu Patekar
+ *
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/clock/sun8i-a83t-ccu.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-r-ccu.h>
+#include <dt-bindings/reset/sun8i-a83t-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/reset/sun8i-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C0CPUX>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			cci-control-port = <&cci_control0>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C0CPUX>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			cci-control-port = <&cci_control0>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C0CPUX>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			cci-control-port = <&cci_control0>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C0CPUX>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			cci-control-port = <&cci_control0>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <3>;
+			#cooling-cells = <2>;
+		};
+
+		cpu100: cpu@100 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C1CPUX>;
+			operating-points-v2 = <&cpu1_opp_table>;
+			cci-control-port = <&cci_control1>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0x100>;
+			#cooling-cells = <2>;
+		};
+
+		cpu101: cpu@101 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C1CPUX>;
+			operating-points-v2 = <&cpu1_opp_table>;
+			cci-control-port = <&cci_control1>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0x101>;
+			#cooling-cells = <2>;
+		};
+
+		cpu102: cpu@102 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C1CPUX>;
+			operating-points-v2 = <&cpu1_opp_table>;
+			cci-control-port = <&cci_control1>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0x102>;
+			#cooling-cells = <2>;
+		};
+
+		cpu103: cpu@103 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C1CPUX>;
+			operating-points-v2 = <&cpu1_opp_table>;
+			cci-control-port = <&cci_control1>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0x103>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* TODO: PRCM block has a mux for this. */
+		osc24M: osc24M-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		/*
+		 * This is called "internal OSC" in some places.
+		 * It is an internal RC-based oscillator.
+		 * TODO: Its controls are in the PRCM block.
+		 */
+		osc16M: osc16M-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <16000000>;
+			clock-output-names = "osc16M";
+		};
+
+		osc16Md512: osc16Md512-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <512>;
+			clock-mult = <1>;
+			clocks = <&osc16M>;
+			clock-output-names = "osc16M-d512";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun8i-a83t-display-engine";
+		allwinner,pipelines = <&mixer0>, <&mixer1>;
+		status = "disabled";
+	};
+
+	cpu0_opp_table: opp-table-cluster0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-864000000 {
+			opp-hz = /bits/ 64 <864000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1128000000 {
+			opp-hz = /bits/ 64 <1128000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
+	cpu1_opp_table: opp-table-cluster1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-864000000 {
+			opp-hz = /bits/ 64 <864000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1128000000 {
+			opp-hz = /bits/ 64 <1128000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		display_clocks: clock@1000000 {
+			compatible = "allwinner,sun8i-a83t-de2-clk";
+			reg = <0x01000000 0x10000>;
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_PLL_DE>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		rotate: rotate@1020000 {
+			compatible = "allwinner,sun8i-a83t-de2-rotate";
+			reg = <0x1020000 0x10000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&display_clocks CLK_BUS_ROT>,
+				 <&display_clocks CLK_ROT>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_ROT>;
+		};
+
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-a83t-de2-mixer-0";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER0>,
+				 <&display_clocks CLK_MIXER0>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_MIXER0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					mixer0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_mixer0>;
+					};
+
+					mixer0_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		mixer1: mixer@1200000 {
+			compatible = "allwinner,sun8i-a83t-de2-mixer-1";
+			reg = <0x01200000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER1>,
+				 <&display_clocks CLK_MIXER1>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_WB>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					mixer1_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_mixer1>;
+					};
+
+					mixer1_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_mixer1>;
+					};
+				};
+			};
+		};
+
+		cpucfg@1700000 {
+			compatible = "allwinner,sun8i-a83t-cpucfg";
+			reg = <0x01700000 0x400>;
+		};
+
+		cci@1790000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x01790000 0x10000>;
+			ranges = <0x0 0x01790000 0x10000>;
+
+			cci_control0: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+
+			cci_control1: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+
+			pmu@9000 {
+				compatible = "arm,cci-400-pmu,r1";
+				reg = <0x9000 0x5000>;
+				interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		syscon: syscon@1c00000 {
+			compatible = "allwinner,sun8i-a83t-system-controller",
+				"syscon";
+			reg = <0x01c00000 0x1000>;
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-a83t-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun8i-a83t-tcon-lcd";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+			clock-names = "ahb", "tcon-ch0";
+			clock-output-names = "tcon-data-clock";
+			#clock-cells = <0>;
+			resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd", "lvds";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+
+					tcon0_in_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mixer1_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		tcon1: lcd-controller@1c0d000 {
+			compatible = "allwinner,sun8i-a83t-tcon-tv";
+			reg = <0x01c0d000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON1>;
+			reset-names = "lcd";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon1_in_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mixer0_out_tcon1>;
+					};
+
+					tcon1_in_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mixer1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon1_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon1>;
+					};
+				};
+			};
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun8i-a83t-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun8i-a83t-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun8i-a83t-emmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		sid: eeprom@1c14000 {
+			compatible = "allwinner,sun8i-a83t-sid";
+			reg = <0x1c14000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@34 {
+				reg = <0x34 8>;
+			};
+		};
+
+		crypto: crypto@1c15000 {
+			compatible = "allwinner,sun8i-a83t-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_SS>;
+			clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
+			clock-names = "bus", "mod";
+		};
+
+		msgbox: mailbox@1c17000 {
+			compatible = "allwinner,sun8i-a83t-msgbox",
+				     "allwinner,sun6i-a31-msgbox";
+			reg = <0x01c17000 0x1000>;
+			clocks = <&ccu CLK_BUS_MSGBOX>;
+			resets = <&ccu RST_BUS_MSGBOX>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+		};
+
+		usb_otg: usb@1c19000 {
+			compatible = "allwinner,sun8i-a83t-musb",
+				     "allwinner,sun8i-a33-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			compatible = "allwinner,sun8i-a83t-usb-phy";
+			reg = <0x01c19400 0x10>,
+			      <0x01c1a800 0x14>,
+			      <0x01c1b800 0x14>;
+			reg-names = "phy_ctrl",
+				    "pmu1",
+				    "pmu2";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_HSIC>,
+				 <&ccu CLK_USB_HSIC_12M>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy",
+				      "usb2_hsic_12M";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_HSIC>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@1c1a000 {
+			compatible = "allwinner,sun8i-a83t-ehci",
+				     "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c1a400 {
+			compatible = "allwinner,sun8i-a83t-ohci",
+				     "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1b000 {
+			compatible = "allwinner,sun8i-a83t-ehci",
+				     "generic-ehci";
+			reg = <0x01c1b000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun8i-a83t-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc16Md512>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun8i-a83t-pinctrl";
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01c20800 0x400>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc16Md512>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			/omit-if-no-ref/
+			csi_8bit_parallel_pins: csi-8bit-parallel-pins {
+				pins = "PE0", "PE2", "PE3", "PE6", "PE7",
+				       "PE8", "PE9", "PE10", "PE11",
+				       "PE12", "PE13";
+				function = "csi";
+			};
+
+			/omit-if-no-ref/
+			csi_mclk_pin: csi-mclk-pin {
+				pins = "PE1";
+				function = "csi";
+			};
+
+			emac_rgmii_pins: emac-rgmii-pins {
+				pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+				       "PD11", "PD12", "PD13", "PD14", "PD18",
+				       "PD19", "PD21", "PD22", "PD23";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			hdmi_pins: hdmi-pins {
+				pins = "PH6", "PH7", "PH8";
+				function = "hdmi";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PH0", "PH1";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PH2", "PH3";
+				function = "i2c1";
+			};
+
+			/omit-if-no-ref/
+			i2c2_pe_pins: i2c2-pe-pins {
+				pins = "PE14", "PE15";
+				function = "i2c2";
+			};
+
+			i2c2_ph_pins: i2c2-ph-pins {
+				pins = "PH4", "PH5";
+				function = "i2c2";
+			};
+
+			i2s1_pins: i2s1-pins {
+				/* I2S1 does not have external MCLK pin */
+				pins = "PG10", "PG11", "PG12", "PG13";
+				function = "i2s1";
+			};
+
+			lcd_lvds_pins: lcd-lvds-pins {
+				pins = "PD18", "PD19", "PD20", "PD21", "PD22",
+				       "PD23", "PD24", "PD25", "PD26", "PD27";
+				function = "lvds0";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2",
+				       "PG3", "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins {
+				pins = "PC5", "PC6", "PC8", "PC9",
+				       "PC10", "PC11", "PC12", "PC13",
+				       "PC14", "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			pwm_pin: pwm-pin {
+				pins = "PD28";
+				function = "pwm";
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PE18";
+				function = "spdif";
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB9", "PB10";
+				function = "uart0";
+			};
+
+			uart0_pf_pins: uart0-pf-pins {
+				pins = "PF2", "PF4";
+				function = "uart0";
+			};
+
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+
+			/omit-if-no-ref/
+			uart2_pb_pins: uart2-pb-pins {
+				pins = "PB0", "PB1";
+				function = "uart2";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun8i-a23-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a83t-spdif",
+				     "allwinner,sun8i-h3-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			resets = <&ccu RST_BUS_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spdif_tx_pin>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a83t-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 3>, <&dma 3>;
+			resets = <&ccu RST_BUS_I2S0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a83t-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 4>, <&dma 4>;
+			resets = <&ccu RST_BUS_I2S1>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s1_pins>;
+			status = "disabled";
+		};
+
+		i2s2: i2s@1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a83t-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 27>;
+			resets = <&ccu RST_BUS_I2S2>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun8i-a83t-pwm",
+				     "allwinner,sun8i-h3-pwm";
+			reg = <0x01c21400 0x400>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun8i-a83t-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun8i-a83t-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun8i-a83t-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun8i-a83t-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x104>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		csi: camera@1cb0000 {
+			compatible = "allwinner,sun8i-a83t-csi";
+			reg = <0x01cb0000 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			status = "disabled";
+		};
+
+		hdmi: hdmi@1ee0000 {
+			compatible = "allwinner,sun8i-a83t-dw-hdmi";
+			reg = <0x01ee0000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
+				 <&ccu CLK_HDMI>;
+			clock-names = "iahb", "isfr", "tmds";
+			resets = <&ccu RST_BUS_HDMI1>;
+			reset-names = "ctrl";
+			phys = <&hdmi_phy>;
+			phy-names = "phy";
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_pins>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon1: endpoint {
+						remote-endpoint = <&tcon1_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@1ef0000 {
+			compatible = "allwinner,sun8i-a83t-hdmi-phy";
+			reg = <0x01ef0000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_HDMI0>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+
+		r_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun8i-a83t-r-intc",
+				     "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x01f00c00 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_ccu: clock@1f01400 {
+			compatible = "allwinner,sun8i-a83t-r-ccu";
+			reg = <0x01f01400 0x400>;
+			clocks = <&osc24M>, <&osc16Md512>, <&osc16M>,
+				 <&ccu CLK_PLL_PERIPH>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		cpucfg@1f01c00 {
+			compatible = "allwinner,sun8i-a83t-r-cpucfg";
+			reg = <0x1f01c00 0x400>;
+		};
+
+		r_cir: ir@1f02000 {
+			compatible = "allwinner,sun8i-a83t-ir",
+				"allwinner,sun6i-a31-ir";
+			clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&r_ccu RST_APB0_IR>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01f02000 0x400>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_cir_pin>;
+			status = "disabled";
+		};
+
+		r_lradc: lradc@1f03c00 {
+			compatible = "allwinner,sun8i-a83t-r-lradc";
+			reg = <0x01f03c00 0x100>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@1f02c00 {
+			compatible = "allwinner,sun8i-a83t-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>,
+				 <&osc16Md512>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_cir_pin: r-cir-pin {
+				pins = "PL12";
+				function = "s_cir_rx";
+			};
+
+			r_rsb_pins: r-rsb-pins {
+				pins = "PL0", "PL1";
+				function = "s_rsb";
+				drive-strength = <20>;
+				bias-pull-up;
+			};
+		};
+
+		r_rsb: rsb@1f03400 {
+			compatible = "allwinner,sun8i-a83t-rsb",
+				     "allwinner,sun8i-a23-rsb";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_APB0_RSB>;
+			clock-frequency = <3000000>;
+			resets = <&r_ccu RST_APB0_RSB>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ths: thermal-sensor@1f04000 {
+			compatible = "allwinner,sun8i-a83t-ths";
+			reg = <0x01f04000 0x100>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu0_hot: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_very_hot: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1_thermal: cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+
+			trips {
+				cpu1_hot: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_very_hot: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_hot>;
+					cooling-device = <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts
new file mode 100644
index 000000000000..d3a7c9fa23e4
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * Based on sun8i-h3-bananapi-m2-plus.dts, which is:
+ *   Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Banana Pi BPI-M2-Zero";
+	compatible = "sinovoip,bpi-m2-zero", "allwinner,sun8i-h2-plus";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "bananapi-m2-zero:red:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		switch-4 {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
+		enable-active-high;
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	reg_vcc1v2: vcc1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	poweroff {
+		compatible = "regulator-poweroff";
+		cpu-supply = <&reg_vcc1v2>;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	/*
+	 * On the production batch of this board the card detect GPIO is
+	 * high active (card inserted), although on the early samples it's
+	 * low active.
+	 */
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <1500000>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+		host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	};
+
+};
+
+&pio {
+	gpio-line-names =
+		/* PA */
+		"CON2-P13", "CON2-P11", "CON2-P22", "CON2-P15",
+			"CON3-P03", "CON3-P02", "CON2-P07", "CON2-P29",
+		"CON2-P31", "CON2-P33", "CON2-P35", "CON2-P05",
+			"CON2-P03", "CON2-P08", "CON2-P10", "CON2-P16",
+		"CON2-P12", "CON2-P37", "CON2-P28", "CON2-P27",
+			"CON2-P40", "CON2-P38", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PB */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PC */
+		"CON2-P19", "CON2-P21", "CON2-P23", "CON2-P24",
+			"CON2-P18", "", "", "CON2-P26",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PD */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "CSI-PWR-EN", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PE */
+		"CN3-P17", "CN3-P13", "CN3-P09", "CN3-P07",
+			"CN3-P19", "CN3-P21", "CN3-P22", "CN3-P20",
+		"CN3-P18", "CN3-P16", "CN3-P14", "CN3-P12",
+			"CN3-P05", "CN3-P03", "CN3-P06", "CN3-P08",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PF */
+		"SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3",
+			"SDC0-D2", "SDC0-DET", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PG */
+		"WL-SDIO-CLK", "WL-SDIO-CMD", "WL-SDIO-D0", "WL-SDIO-D1",
+			"WL-SDIO-D2", "WL-SDIO-D3", "BT-UART-TX", "BT-UART-RX",
+		"BT-UART-RTS", "BT-UART-CTS", "WL-WAKE-AP", "BT-WAKE-AP",
+			"BT-RST-N", "AP-WAKE-BT", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&r_pio {
+	gpio-line-names =
+		/* PL */
+		"", "CPUX-SET", "CON2-P32", "POWER-KEY", "CON2-P36",
+			"VCC-IO-EN", "USB0-ID", "WL-PWR-EN",
+		"PWR-STB", "PWR-DRAM", "PWR-LED", "IR-RX", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	/*
+	 * There're two micro-USB connectors, one is power-only and another is
+	 * OTG. The Vbus of these two connectors are connected together, so
+	 * the external USB device will be powered just by the power input
+	 * from the power-only USB port.
+	 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-libretech-all-h3-cc.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-libretech-all-h3-cc.dts
new file mode 100644
index 000000000000..4db0d4bb65eb
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-libretech-all-h3-cc.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-libretech-all-h3-cc.dtsi"
+
+/ {
+	model = "Libre Computer Board ALL-H3-CC H2+";
+	compatible = "libretech,all-h3-cc-h2-plus", "allwinner,sun8i-h2-plus";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-r1.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-r1.dts
new file mode 100644
index 000000000000..79b03b31c5eb
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-r1.dts
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* Orange Pi R1 is based on Orange Pi Zero design */
+#include "sun8i-h2-plus-orangepi-zero.dts"
+
+/delete-node/ &reg_vcc_wifi;
+
+/ {
+	model = "Xunlong Orange Pi R1";
+	compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
+
+
+	/*
+	 * Ths pin of this regulator is the same with the Wi-Fi extra
+	 * regulator on the original Zero. However it's used for USB
+	 * Ethernet rather than the Wi-Fi now.
+	 */
+	reg_vcc_usb_eth: reg-vcc-usb-ethernet {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc-usb-ethernet";
+		enable-active-high;
+		gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+	};
+
+	aliases {
+		ethernet1 = &rtl8189etv;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
+	};
+};
+
+&ohci1 {
+	/*
+	 * RTL8152B USB-Ethernet adapter is connected to USB1,
+	 * and it's a USB 2.0 device. So the OHCI1 controller
+	 * can be left disabled.
+	 */
+	status = "disabled";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+
+	rtl8189etv: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc_usb_eth>;
+};
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
index 6713d0f2b3f4..b23cec5b89eb 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
@@ -80,7 +80,7 @@
 		};
 	};
 
-	reg_vcc_wifi: reg_vcc_wifi {
+	reg_vcc_wifi: reg-vcc-wifi {
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -89,13 +89,47 @@
 		gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		enable-active-high;
+		gpios-states = <1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
 		post-power-on-delay-ms = <200>;
 	};
 };
 
+/*
+ * Audio input/output is exposed on the 13-pin header and can't be used for
+ * anything else. However, adapter boards may use different audio routing.
+ * - https://linux-sunxi.org/Xunlong_Orange_Pi_Zero#Expansion_Port
+ * - Allwinner H3 Datasheet, section 3.1. Pin Characteristics
+ */
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "disabled";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -112,18 +146,13 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
-	cd-inverted;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";
 };
 
 &mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>;
 	vmmc-supply = <&reg_vcc_wifi>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
@@ -134,15 +163,11 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	xr819: sdio_wifi@1 {
+	xr819: wifi@1 {
 		reg = <1>;
 	};
 };
 
-&mmc1_pins_a {
-	bias-pull-up;
-};
-
 &ohci0 {
 	status = "okay";
 };
@@ -158,7 +183,7 @@
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "mxicy,mx25l1606e", "winbond,w25q128";
+		compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <40000000>;
 	};
@@ -166,7 +191,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pa_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus-v1.2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus-v1.2.dts
new file mode 100644
index 000000000000..fc4a8c3d084d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus-v1.2.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-bananapi-m2-plus-v1.2.dtsi"
+
+/ {
+	model = "Banana Pi BPI-M2-Plus v1.2 H3";
+	compatible = "bananapi,bpi-m2-plus-v1.2", "allwinner,sun8i-h3";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus.dts
new file mode 100644
index 000000000000..195a75da13f1
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-bananapi-m2-plus.dtsi"
+
+/ {
+	model = "Banana Pi BPI-M2-Plus H3";
+	compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-beelink-x2.dts
new file mode 100644
index 000000000000..5b77300307de
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-beelink-x2.dts
@@ -0,0 +1,238 @@
+/*
+ * Copyright (C) 2017 Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Beelink X2";
+	compatible = "roofull,beelink-x2", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &emac;
+		ethernet1 = &sdiowifi;
+	};
+
+	cec {
+		compatible = "cec-gpio";
+		cec-gpios = <&pio 0 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PA14 */
+		hdmi-phandle = <&hdmi>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "beelink-x2:blue:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "beelink-x2:red:standby";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	sound_spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-tanix-tx3mini";
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	sdiowifi: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on except for the OTG port */
+	status = "okay";
+	usb0_id_det-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA07 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3-devboard.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3-devboard.dts
new file mode 100644
index 000000000000..02fbe00cde97
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3-devboard.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTS for Emlid Neutis N5 Dev board.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgiii.staroselskii@emlid.com>
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3-emlid-neutis-n5h3.dtsi"
+
+/ {
+	model = "Emlid Neutis N5H3 Developer board";
+	compatible = "emlid,neutis-n5h3-devboard",
+		     "emlid,neutis-n5h3",
+		     "allwinner,sun8i-h3";
+
+	vdd_cpux: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		gpios-states = <0x1>;
+		states = <1100000 0x0>, <1300000 0x1>;
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
+};
+
+&codec {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3.dtsi b/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3.dtsi
new file mode 100644
index 000000000000..35e71f46c197
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTSI for Emlid Neutis N5 SoM.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgii.staroselskii@emlid.com>
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3.dtsi"
+#include "sunxi-h3-h5-emlid-neutis.dtsi"
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-libretech-all-h3-cc.dts
new file mode 100644
index 000000000000..a8b2f0f1c11d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-libretech-all-h3-cc.dts
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-libretech-all-h3-cc.dtsi"
+
+/ {
+	model = "Libre Computer Board ALL-H3-CC H3";
+	compatible = "libretech,all-h3-cc-h3", "allwinner,sun8i-h3";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-mapleboard-mp130.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-mapleboard-mp130.dts
new file mode 100644
index 000000000000..f5c8ccc5b872
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-mapleboard-mp130.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Centrum Embedded Systems, Jia-Bin Huang <jb@ces.com.tw>
+ * Copyright (C) 2018 Jonathan McDowell <noodles@earth.li>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "MapleBoard MP130";
+	compatible = "mapleboard,mp130", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "mp130:orange:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "mp130:orange:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
+		};
+
+		key-user {
+			label = "user";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"LINEIN", "Line In";
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts
new file mode 100644
index 000000000000..2b0566d4b386
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Karl Palsson <karlp@tweak.net.au>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "FriendlyARM NanoPi Duo2";
+	compatible = "friendlyarm,nanopi-duo2", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "nanopi:red:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "nanopi:green:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-0 {
+			label = "k1";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
+		};
+	};
+
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		enable-active-high;
+		enable-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		vin-supply = <&reg_vcc5v0>;
+        };
+
+	reg_vdd_sys: vdd-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-sys";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		vin-supply = <&reg_vcc5v0>;
+        };
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+		host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	};
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1-plus.dts
new file mode 100644
index 000000000000..59bd0746acf8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1-plus.dts
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+	model = "FriendlyArm NanoPi M1 Plus";
+	compatible = "friendlyarm,nanopi-m1-plus", "allwinner,sun8i-h3";
+
+	aliases {
+		serial1 = &uart3;
+		ethernet0 = &emac;
+		ethernet1 = &sdio_wifi;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1.dts
index ec63d104b404..69243dcb30a6 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1.dts
@@ -45,6 +45,25 @@
 / {
 	model = "FriendlyArm NanoPi M1";
 	compatible = "friendlyarm,nanopi-m1", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&de {
+	status = "okay";
 };
 
 &ehci1 {
@@ -55,6 +74,29 @@
 	status = "okay";
 };
 
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
 &ohci1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts
new file mode 100644
index 000000000000..9a2742363cd0
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts
@@ -0,0 +1,143 @@
+/*
+ * Copyright (C) 2017 Jelle van der Waa <jelle@vdwaa.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "FriendlyARM NanoPi NEO Air";
+	compatible = "friendlyarm,nanopi-neo-air", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "nanopi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "nanopi:blue:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+		};
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+		host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	};
+};
+
+&usbphy {
+	/* USB VBUS is always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo.dts
index 78f6c24952dd..df71fab3cf4e 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo.dts
@@ -45,6 +45,14 @@
 / {
 	model = "FriendlyARM NanoPi NEO";
 	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+};
+
+&ehci0 {
+	status = "okay";
 };
 
 &emac {
@@ -53,3 +61,16 @@
 	allwinner,leds-active-low;
 	status = "okay";
 };
+
+&ohci0 {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-r1.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-r1.dts
new file mode 100644
index 000000000000..870649760f70
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-r1.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
+ * Copyright (C) 2020 Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
+ * Copyright (C) 2020 Yu-Tung Chang <mtwget@gmail.com>
+*/
+
+#include "sun8i-h3-nanopi.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "FriendlyARM NanoPi R1";
+	compatible = "friendlyarm,nanopi-r1", "allwinner,sun8i-h3";
+
+	aliases {
+		serial1 = &uart1;
+		ethernet0 = &emac;
+		ethernet1 = &wifi;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+	};
+
+	reg_vdd_cpux: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>;
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		gpios-states = <0x1>;
+		states = <1100000 0x0>,
+			 <1300000 0x1>;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+
+	leds {
+		led-2 {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		};
+
+		led-3 {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>; /* PA9 */
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	wifi: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+		host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	};
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi.dtsi
index c6decee41a27..cf8413fba6c1 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi.dtsi
@@ -59,32 +59,28 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_npi>, <&leds_r_npi>;
 
-		status {
+		led-0 {
 			label = "nanopi:blue:status";
 			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		pwr {
+		led-1 {
 			label = "nanopi:green:pwr";
 			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		input-name = "k1";
-		pinctrl-names = "default";
-		pinctrl-0 = <&sw_r_npi>;
 
-		k1@0 {
+		key-0 {
 			label = "k1";
 			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 };
@@ -95,10 +91,7 @@
 
 &mmc0 {
 	bus-width = <4>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
 	status = "okay";
 	vmmc-supply = <&reg_vcc3v3>;
 };
@@ -107,28 +100,9 @@
 	status = "okay";
 };
 
-&pio {
-	leds_npi: led_pins@0 {
-		pins = "PA10";
-		function = "gpio_out";
-	};
-};
-
-&r_pio {
-	leds_r_npi: led_pins@0 {
-		pins = "PL10";
-		function = "gpio_out";
-	};
-
-	sw_r_npi: key_pins@0 {
-		pins = "PL3";
-		function = "gpio_in";
-	};
-};
-
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pa_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-2.dts
index 17cdeae19c6f..d2ae47b074bf 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-2.dts
@@ -62,10 +62,19 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
 
 		status_led {
 			label = "orangepi:red:status";
@@ -79,28 +88,25 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&sw_r_opc>;
 
-		sw2 {
+		switch-2 {
 			label = "sw2";
 			linux,code = <BTN_1>;
 			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
 		};
 
-		sw4 {
+		switch-4 {
 			label = "sw4";
-			linux,code = <BTN_0>;
+			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_pwrseq_pin_orangepi>;
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */
 	};
 };
@@ -114,6 +120,10 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci1 {
 	status = "okay";
 };
@@ -125,25 +135,30 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir_pins_a>;
+	pinctrl-0 = <&r_ir_rx_pin>;
 	status = "okay";
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
-	cd-inverted;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";
 };
 
 &mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
@@ -154,35 +169,11 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	rtl8189: sdio_wifi@1 {
+	rtl8189: wifi@1 {
 		reg = <1>;
 	};
 };
 
-&pio {
-	leds_opc: led_pins@0 {
-		pins = "PA15";
-		function = "gpio_out";
-	};
-};
-
-&r_pio {
-	leds_r_opc: led_pins@0 {
-		pins = "PL10";
-		function = "gpio_out";
-	};
-
-	sw_r_opc: key_pins@0 {
-		pins = "PL3", "PL4";
-		function = "gpio_in";
-	};
-
-	wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin@0 {
-		pins = "PL7";
-		function = "gpio_out";
-	};
-};
-
 &reg_usb1_vbus {
 	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
 	status = "okay";
@@ -190,7 +181,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pa_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-lite.dts
index 9b47a0def740..6a4316a52469 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-lite.dts
@@ -61,10 +61,19 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
 
 		pwr_led {
 			label = "orangepi:green:pwr";
@@ -78,12 +87,10 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&sw_r_opc>;
 
-		sw4 {
+		switch-4 {
 			label = "sw4";
 			linux,code = <BTN_0>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
@@ -91,6 +98,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci1 {
 	status = "okay";
 };
@@ -99,25 +110,30 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir_pins_a>;
+	pinctrl-0 = <&r_ir_rx_pin>;
 	status = "okay";
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
-	cd-inverted;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";
 };
 
 &mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	non-removable;
@@ -127,7 +143,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	rtl8189ftv: sdio_wifi@1 {
+	rtl8189ftv: wifi@1 {
 		reg = <1>;
 	};
 };
@@ -140,28 +156,9 @@
 	status = "okay";
 };
 
-&pio {
-	leds_opc: led_pins@0 {
-		pins = "PA15";
-		function = "gpio_out";
-	};
-};
-
-&r_pio {
-	leds_r_opc: led_pins@0 {
-		pins = "PL10";
-		function = "gpio_out";
-	};
-
-	sw_r_opc: key_pins@0 {
-		pins = "PL3";
-		function = "gpio_in";
-	};
-};
-
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pa_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-one.dts
index 6880268e8b87..59f6f6d5e7ca 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-one.dts
@@ -60,10 +60,19 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
 
 		pwr_led {
 			label = "orangepi:green:pwr";
@@ -77,17 +86,39 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&sw_r_opc>;
 
-		sw4 {
+		switch-4 {
 			label = "sw4";
 			linux,code = <BTN_0>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		enable-active-high;
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
 };
 
 &ehci0 {
@@ -105,13 +136,20 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
-	cd-inverted;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";
 };
 
@@ -123,25 +161,6 @@
 	status = "okay";
 };
 
-&pio {
-	leds_opc: led_pins@0 {
-		pins = "PA15";
-		function = "gpio_out";
-	};
-};
-
-&r_pio {
-	leds_r_opc: led_pins@0 {
-		pins = "PL10";
-		function = "gpio_out";
-	};
-
-	sw_r_opc: key_pins@0 {
-		pins = "PL3";
-		function = "gpio_in";
-	};
-};
-
 &reg_usb0_vbus {
 	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
 	status = "okay";
@@ -149,7 +168,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pa_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc-plus.dts
index a10281b455f5..8a49b3376dfc 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc-plus.dts
@@ -53,14 +53,7 @@
 	};
 };
 
-&emac {
-	/* LEDs changed to active high on the plus */
-	/delete-property/ allwinner,leds-active-low;
-};
-
 &mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	non-removable;
@@ -70,7 +63,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	rtl8189ftv: sdio_wifi@1 {
+	rtl8189ftv: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc.dts
index 998b60f8d295..b96e015f54ee 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc.dts
@@ -60,10 +60,19 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
 
 		pwr_led {
 			label = "orangepi:green:pwr";
@@ -77,15 +86,14 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&sw_r_opc>;
 
-		sw4 {
+		switch-4 {
 			label = "sw4";
-			linux,code = <BTN_0>;
+			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 };
@@ -98,6 +106,14 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -121,19 +137,26 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir_pins_a>;
+	pinctrl-0 = <&r_ir_rx_pin>;
 	status = "okay";
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
-	cd-inverted;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";
 };
 
@@ -153,22 +176,27 @@
 	status = "okay";
 };
 
-&pio {
-	leds_opc: led_pins@0 {
-		pins = "PA15";
-		function = "gpio_out";
-	};
-};
-
-&r_pio {
-	leds_r_opc: led_pins@0 {
-		pins = "PL10";
-		function = "gpio_out";
-	};
-
-	sw_r_opc: key_pins@0 {
-		pins = "PL3";
-		function = "gpio_in";
+&r_i2c {
+	status = "okay";
+
+	reg_vdd_cpux: regulator@65 {
+		compatible = "silergy,sy8106a";
+		reg = <0x65>;
+		regulator-name = "vdd-cpux";
+		silergy,fixed-microvolt = <1200000>;
+		/*
+		 * The datasheet uses 1.1V as the minimum value of VDD-CPUX,
+		 * however both the Armbian DVFS table and the official one
+		 * have operating points with voltage under 1.1V, and both
+		 * DVFS table are known to work properly at the lowest
+		 * operating point.
+		 *
+		 * Use 1.0V as the minimum voltage instead.
+		 */
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-boot-on;
+		regulator-always-on;
 	};
 };
 
@@ -179,7 +207,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pa_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus.dts
index 331ed683ac62..d05fa679dcd3 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus.dts
@@ -63,8 +63,6 @@
 
 	reg_usb3_vbus: usb3-vbus {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb3_vbus_pin_a>;
 		regulator-name = "usb3-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -74,6 +72,10 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
 &ehci3 {
 	status = "okay";
 };
@@ -83,13 +85,12 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 
-	allwinner,leds-active-low;
 	status = "okay";
 };
 
-&mdio {
+&external_mdio {
 	ext_rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
@@ -113,10 +114,19 @@
 	bias-pull-up;
 };
 
-&pio {
-	usb3_vbus_pin_a: usb3_vbus_pin@0 {
-		pins = "PG11";
-		function = "gpio_out";
+&r_i2c {
+	status = "okay";
+
+	reg_vdd_cpux: regulator@65 {
+		compatible = "silergy,sy8106a";
+		reg = <0x65>;
+		regulator-name = "vdd-cpux";
+		silergy,fixed-microvolt = <1200000>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-ramp-delay = <200>;
+		regulator-boot-on;
+		regulator-always-on;
 	};
 };
 
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus2e.dts
index 80026f3caafc..b6ca45d18e51 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus2e.dts
@@ -67,11 +67,11 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
-&mdio {
+&external_mdio {
 	ext_rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
new file mode 100644
index 000000000000..97a3565ac7a8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
@@ -0,0 +1,191 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ * Copyright (C) 2018 Diego Rondini <diego.rondini@kynetics.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "OrangePi Zero Plus2 H3";
+	compatible = "xunlong,orangepi-zero-plus2-h3", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+/*
+ * Audio input/output is exposed on the 13-pin header and can't be used for
+ * anything else. However, adapter boards may use different audio routing.
+ * - http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-Plus-2.html
+ * - Allwinner H3 Datasheet, section 3.1. Pin Characteristics
+ */
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "disabled";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>;	/* PL7 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * According to schematics CN1 MicroUSB port can be used to take
+	 * external 5V to power up the board VBUS. On the contrary CN1 MicroUSB
+	 * port cannot provide power externally even if the board is powered
+	 * via GPIO pins. It thus makes sense to force peripheral mode.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-rervision-dvk.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-rervision-dvk.dts
new file mode 100644
index 000000000000..4738f3a9efe4
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-rervision-dvk.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Bootlin
+ * Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "RerVision H3-DVK";
+	compatible = "rervision,h3-dvk", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-zeropi.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-zeropi.dts
new file mode 100644
index 000000000000..7d3e7323b661
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-zeropi.dts
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2020 Yu-Tung Chang <mtwget@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+	model = "FriendlyARM ZeroPi";
+	compatible = "friendlyarm,zeropi", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+	};
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3.dtsi b/arch/arm/boot/dts/allwinner/sun8i-h3.dtsi
new file mode 100644
index 000000000000..cfd039840b43
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3.dtsi
@@ -0,0 +1,335 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-h3-h5.dtsi"
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	cpu0_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-648000000 {
+			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <1040000 1040000 1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1100000 1100000 1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1200000 1200000 1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+		};
+
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+		};
+
+		opp-432000000 {
+			opp-hz = /bits/ 64 <432000000>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		deinterlace: deinterlace@1400000 {
+			compatible = "allwinner,sun8i-h3-deinterlace";
+			reg = <0x01400000 0x20000>;
+			clocks = <&ccu CLK_BUS_DEINTERLACE>,
+				 <&ccu CLK_DEINTERLACE>,
+				 <&ccu CLK_DRAM_DEINTERLACE>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_DEINTERLACE>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mbus 9>;
+			interconnect-names = "dma-mem";
+		};
+
+		syscon: system-control@1c00000 {
+			compatible = "allwinner,sun8i-h3-system-control";
+			reg = <0x01c00000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0x80000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0x80000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun8i-h3-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun8i-h3-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		crypto: crypto@1c15000 {
+			compatible = "allwinner,sun8i-h3-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun8i-h3-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+			operating-points-v2 = <&gpu_opp_table>;
+		};
+
+		ths: thermal-sensor@1c25000 {
+			compatible = "allwinner,sun8i-h3-ths";
+			reg = <0x01c25000 0x400>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths>;
+
+			trips {
+				cpu_hot_trip: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_very_hot_trip: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_hot_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
+
+&ccu {
+	compatible = "allwinner,sun8i-h3-ccu";
+};
+
+&display_clocks {
+	compatible = "allwinner,sun8i-h3-de2-clk";
+};
+
+&mbus {
+	compatible = "allwinner,sun8i-h3-mbus";
+};
+
+&mmc0 {
+	compatible = "allwinner,sun7i-a20-mmc";
+	clocks = <&ccu CLK_BUS_MMC0>,
+		 <&ccu CLK_MMC0>,
+		 <&ccu CLK_MMC0_OUTPUT>,
+		 <&ccu CLK_MMC0_SAMPLE>;
+	clock-names = "ahb",
+		      "mmc",
+		      "output",
+		      "sample";
+};
+
+&mmc1 {
+	compatible = "allwinner,sun7i-a20-mmc";
+	clocks = <&ccu CLK_BUS_MMC1>,
+		 <&ccu CLK_MMC1>,
+		 <&ccu CLK_MMC1_OUTPUT>,
+		 <&ccu CLK_MMC1_SAMPLE>;
+	clock-names = "ahb",
+		      "mmc",
+		      "output",
+		      "sample";
+};
+
+&mmc2 {
+	compatible = "allwinner,sun7i-a20-mmc";
+	clocks = <&ccu CLK_BUS_MMC2>,
+		 <&ccu CLK_MMC2>,
+		 <&ccu CLK_MMC2_OUTPUT>,
+		 <&ccu CLK_MMC2_SAMPLE>;
+	clock-names = "ahb",
+		      "mmc",
+		      "output",
+		      "sample";
+};
+
+&pio {
+	compatible = "allwinner,sun8i-h3-pinctrl";
+};
+
+&rtc {
+	compatible = "allwinner,sun8i-h3-rtc";
+};
+
+&sid {
+	compatible = "allwinner,sun8i-h3-sid";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso b/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso
new file mode 100644
index 000000000000..e137eefee341
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+ *
+ * Devicetree overlay for the Orange Pi Zero Interface board (OP0014).
+ *
+ *   https://orangepi.com/index.php?route=product/product&product_id=871
+ *
+ * This overlay applies to the following base files:
+ *
+ * - arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
+ * - arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
+ */
+
+/dts-v1/;
+/plugin/;
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi
index c676940a96da..a0f787581dd9 100644
--- a/arch/arm/boot/dts/sun8i-q8-common.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi
@@ -49,7 +49,20 @@
 		ethernet0 = &sdio_wifi;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	panel: panel {
+		/* Tablet dts should provide panel compatible */
+		backlight = <&backlight>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_dc1sw>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&tcon0_out_lcd>;
+			};
+		};
+	};
+
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		/*
 		 * Q8 boards use various PL# pins as wifi-en. On other boards
@@ -64,36 +77,42 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
-	status  = "okay";
+	status = "okay";
 };
 
 &mmc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>;
+	pinctrl-0 = <&mmc1_pg_pins>;
 	vmmc-supply = <&reg_dldo1>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
 	non-removable;
 	status = "okay";
 
-	sdio_wifi: sdio_wifi@1 {
+	sdio_wifi: wifi@1 {
 		reg = <1>;
 	};
 };
 
-&mmc1_pins_a {
-	bias-pull-up;
-};
-
 &r_pio {
-	wifi_pwrseq_pin_q8: wifi_pwrseq_pin@0 {
+	wifi_pwrseq_pin_q8: wifi-pwrseq-pins {
 		pins = "PL6", "PL7", "PL11";
 		function = "gpio_in";
 		bias-pull-up;
 	};
 };
 
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+	status = "okay";
+};
+
 &usbphy {
 	usb1_vbus-supply = <&reg_dldo1>;
 };
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-bananapi-m2m.dts
new file mode 100644
index 000000000000..f4bf46b35bec
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r16-bananapi-m2m.dts
@@ -0,0 +1,311 @@
+/*
+ * Copyright (c) 2017 Free Electrons <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "BananaPi M2 Magic";
+	compatible = "sinovoip,bananapi-m2m", "allwinner,sun8i-a33";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bpi-m2m:blue:usr";
+			gpios = <&pio 2 7 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			label = "bpi-m2m:green:usr";
+			gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			label = "bpi-m2m:red:power";
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&cpu0_opp_table {
+	opp-1104000000 {
+		opp-hz = /bits/ 64 <1104000000>;
+		opp-microvolt = <1320000>;
+		clock-latency-ns = <244144>; /* 8 32k periods */
+	};
+
+	opp-1200000000 {
+		opp-hz = /bits/ 64 <1200000000>;
+		opp-microvolt = <1320000>;
+		clock-latency-ns = <244144>; /* 8 32k periods */
+	};
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp223.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+/*
+ * Our WiFi chip needs both DLDO1 and DLDO2 to be powered at the same
+ * time, with the two being in sync. Since this is not really
+ * supported right now, just use the two as always on, and we will fix
+ * it later.
+ */
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi0";
+};
+
+&reg_dldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi1";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&sound {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo1>;
+		vddio-supply = <&reg_aldo3>;
+		device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+		host-wakeup-gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		shutdown-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-nes-classic.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-nes-classic.dts
new file mode 100644
index 000000000000..246dec5846a4
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-nes-classic.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/* Copyright (c) 2016 FUKAUMI Naoki <naobsd@gmail.com> */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Nintendo NES Classic Edition";
+	compatible = "nintendo,nes-classic", "allwinner,sun8i-r16",
+		     "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	/*
+	 * UART0 is available on two ports: PB and PF, both are accessible.
+	 * PF can also be used for the SD card so PB is preferred.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pf_pins>;
+	status = "okay";
+};
+
+&nfc {
+	status = "okay";
+
+	/* 2Gb Macronix MX30LF2G18AC (3V) */
+	nand@0 {
+		reg = <0>;
+		allwinner,rb = <0>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <16>;
+		nand-ecc-step-size = <1024>;
+	};
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbphy {
+	/* VBUS is always on because it is wired to the power supply */
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-super-nes-classic.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-super-nes-classic.dts
new file mode 100644
index 000000000000..80761d7904ec
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-super-nes-classic.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/* Copyright (c) 2018 Miquèl RAYNAL <miquel.raynal@bootlin.com> */
+
+/dts-v1/;
+#include "sun8i-r16-nintendo-nes-classic.dts"
+
+/ {
+	model = "Nintendo SuperNES Classic Edition";
+	compatible = "nintendo,super-nes-classic", "nintendo,nes-classic",
+		     "allwinner,sun8i-r16", "allwinner,sun8i-a33";
+};
diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-parrot.dts
index 472c03b7aeab..75067522ff59 100644
--- a/arch/arm/boot/dts/sun8i-r16-parrot.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-r16-parrot.dts
@@ -63,21 +63,19 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_parrot>;
 
-		led1 {
+		led-1 {
 			label = "parrot:led1:usr";
-			gpio = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+			gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
 		};
 
-		led2 {
+		led-2 {
 			label = "parrot:led2:usr";
-			gpio = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
+			gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
 	};
@@ -97,8 +95,6 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 
 	/*
@@ -111,14 +107,14 @@
 	vref-supply = <&reg_aldo3>;
 	status = "okay";
 
-	button@0 {
+	button-190 {
 		label = "V+";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <190000>;
 	};
 
-	button@1 {
+	button-390 {
 		label = "V-";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
@@ -128,8 +124,6 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_parrot>;
 	vmmc-supply = <&reg_dcdc1>;
 	cd-gpios = <&pio 3 14 GPIO_ACTIVE_LOW>; /* PD14 */
 	bus-width = <4>;
@@ -138,7 +132,7 @@
 
 &mmc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_parrot>;
+	pinctrl-0 = <&mmc1_pg_pins>;
 	vmmc-supply = <&reg_aldo1>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
@@ -158,52 +152,20 @@
 
 &mmc2_8bit_pins {
 	drive-strength = <40>;
-	bias-pull-up;
 };
 
 &ohci0 {
 	status = "okay";
 };
 
-&pio {
-	mmc0_cd_pin_parrot: mmc0_cd_pin@0 {
-		pins = "PD14";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	led_pins_parrot: led_pins@0 {
-		pins = "PE16", "PE17";
-		function = "gpio_out";
-	};
-
-	usb0_id_det: usb0_id_detect_pin@0 {
-		pins = "PD10";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb1_vbus_pin_parrot: usb1_vbus_pin@0 {
-		pins = "PD12";
-		function = "gpio_out";
-	};
-};
-
-&r_pio {
-	wifi_reset_pin_parrot: wifi_reset_pin@0 {
-		pins = "PL6";
-		function = "gpio_out";
-	};
-};
-
 &r_rsb {
 	status = "okay";
 
 	axp22x: pmic@3a3 {
 		compatible = "x-powers,axp223";
 		reg = <0x3a3>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		drivevbus-supply = <&reg_vcc5v0>;
 		x-powers,drive-vbus-en;
 	};
@@ -319,8 +281,6 @@
 };
 
 &reg_usb1_vbus {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_vbus_pin_parrot>;
 	gpio = <&pio 3 12 GPIO_ACTIVE_HIGH>; /* PD12 */
 	status = "okay";
 };
@@ -331,7 +291,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_b>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -346,10 +306,8 @@
 
 &usbphy {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_det>;
 	usb0_vbus-supply = <&reg_drivevbus>;
-	usb0_id_det-gpios = <&pio 3 10 GPIO_ACTIVE_HIGH>; /* PD10 */
+	usb0_id_det-gpios = <&pio 3 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD10 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 };
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/allwinner/sun8i-r40-bananapi-m2-ultra.dts
new file mode 100644
index 000000000000..cd2351acc32f
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-bananapi-m2-ultra.dts
@@ -0,0 +1,340 @@
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Banana Pi BPI-M2-Ultra";
+	compatible = "sinovoip,bpi-m2-ultra", "allwinner,sun8i-r40";
+
+	aliases {
+		ethernet0 = &gmac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr-led {
+			label = "bananapi:red:pwr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		user-led-green {
+			label = "bananapi:green:user";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		user-led-blue {
+			label = "bananapi:blue:user";
+			gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+		enable-active-high;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ahci {
+	ahci-supply = <&reg_dldo4>;
+	phy-supply = <&reg_eldo3>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_dc1sw>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp22x: pmic@34 {
+		compatible = "x-powers,axp221";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&ir0 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo2>;
+	vqmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&pio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clk_out_a_pin>;
+	vcc-pa-supply = <&reg_aldo2>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_eldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo1>;
+};
+
+&reg_aldo2 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-pa";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-gmac-phy";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+/*
+ * Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same
+ * time, with the two being in sync, to be able to meet maximum power
+ * consumption during transmits. Since this is not really supported
+ * right now, just use the two as always on, and we will fix it later.
+ */
+
+&reg_dldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-2";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vdd2v5-sata";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd1v2-sata";
+};
+
+&tcon_tv0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo2>;
+		vddio-supply = <&reg_dldo1>;
+		device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		/* TODO host wake line connected to PMIC GPIO pins */
+		shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+		max-speed = <1500000>;
+	};
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	usb2_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40-cpu-opp.dtsi b/arch/arm/boot/dts/allwinner/sun8i-r40-cpu-opp.dtsi
new file mode 100644
index 000000000000..649928b361af
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-cpu-opp.dtsi
@@ -0,0 +1,52 @@
+/{
+	cpu0_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1000000 1000000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <1100000 1100000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1160000 1160000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <1240000 1240000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1300000 1300000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40-feta40i.dtsi b/arch/arm/boot/dts/allwinner/sun8i-r40-feta40i.dtsi
new file mode 100644
index 000000000000..c12361d0317f
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-feta40i.dtsi
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// Copyright (C) 2021 Ivan Uvarov <i.uvarov@cognitivepilot.com>
+// Based on the sun8i-r40-bananapi-m2-ultra.dts, which is:
+//  Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+//  Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+#include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp22x: pmic@34 {
+		compatible = "x-powers,axp221";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_aldo2>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clk_out_a_pin>;
+	vcc-pa-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_aldo2>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pf-supply = <&reg_dldo4>;
+	vcc-pg-supply = <&reg_dldo1>;
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3-tv-usb";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pa";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_dldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vdd2v5-sata";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd1v2-sata";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-pe";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts b/arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts
new file mode 100644
index 000000000000..15b0b4de626a
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// Copyright (C) 2021 Ivan Uvarov <i.uvarov@cognitivepilot.com>
+// Based on the sun8i-r40-bananapi-m2-ultra.dts, which is:
+//	Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+//	Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+/dts-v1/;
+#include "sun8i-r40-feta40i.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Forlinx OKA40i-C";
+	compatible = "forlinx,oka40i-c", "forlinx,feta40i-c", "allwinner,sun8i-r40";
+
+	aliases {
+		ethernet0 = &gmac;
+		serial0 = &uart0;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5; /* RS485 */
+		serial7 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-5 { /* this is how the leds are labeled on the board */
+			gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led-6 {
+			gpios = <&pio 8 15 GPIO_ACTIVE_LOW>; /* PI15 */
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; // PB10 WIFI_EN
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ahci {
+	ahci-supply = <&reg_dldo4>;
+	phy-supply = <&reg_eldo2>;
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 8 11 GPIO_ACTIVE_LOW>; // PI11
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 8 10 GPIO_ACTIVE_LOW>; // PI10
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&reg_dc1sw {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&tcon_tv0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pi_pins>, <&uart2_rts_cts_pi_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pg_pins>;
+	status = "okay";
+};
+
+&uart5 { /* RS485 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_ph_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	usb2_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi b/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi
new file mode 100644
index 000000000000..f0ed802a9d08
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi
@@ -0,0 +1,1328 @@
+/*
+ * Copyright 2017 Chen-Yu Tsai <wens@csie.org>
+ * Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-r40-ccu.h>
+#include <dt-bindings/clock/sun8i-tcon-top.h>
+#include <dt-bindings/reset/sun8i-r40-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <20000>;
+			clock-output-names = "ext-osc32k";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun8i-r40-display-engine";
+		allwinner,pipelines = <&mixer0>, <&mixer1>;
+		status = "disabled";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu0-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu_hot_trip: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_very_hot_trip: cpu-very-hot {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_hot_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		display_clocks: clock@1000000 {
+			compatible = "allwinner,sun8i-r40-de2-clk",
+				     "allwinner,sun8i-h3-de2-clk";
+			reg = <0x01000000 0x10000>;
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_DE>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-r40-de2-mixer-0";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER0>,
+				 <&display_clocks CLK_MIXER0>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_MIXER0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					reg = <1>;
+					mixer0_out_tcon_top: endpoint {
+						remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		mixer1: mixer@1200000 {
+			compatible = "allwinner,sun8i-r40-de2-mixer-1";
+			reg = <0x01200000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER1>,
+				 <&display_clocks CLK_MIXER1>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_WB>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer1_out: port@1 {
+					reg = <1>;
+					mixer1_out_tcon_top: endpoint {
+						remote-endpoint = <&tcon_top_mixer1_in_mixer1>;
+					};
+				};
+			};
+		};
+
+		deinterlace: deinterlace@1400000 {
+			compatible = "allwinner,sun8i-r40-deinterlace",
+				     "allwinner,sun8i-h3-deinterlace";
+			reg = <0x01400000 0x20000>;
+			clocks = <&ccu CLK_BUS_DEINTERLACE>,
+				 <&ccu CLK_DEINTERLACE>,
+				 /*
+				  * NOTE: Contrary to what datasheet claims,
+				  * DRAM deinterlace gate doesn't exist and
+				  * it's shared with CSI1.
+				  */
+				 <&ccu CLK_DRAM_CSI1>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_DEINTERLACE>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mbus 9>;
+			interconnect-names = "dma-mem";
+		};
+
+		syscon: system-control@1c00000 {
+			compatible = "allwinner,sun8i-r40-system-control",
+				     "allwinner,sun4i-a10-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0xd0000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0xd0000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun8i-r40-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		nmi_intc: interrupt-controller@1c00030 {
+			compatible = "allwinner,sun7i-a20-sc-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01c00030 0x0c>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-r40-dma",
+				     "allwinner,sun50i-a64-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			dma-channels = <16>;
+			dma-requests = <31>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		csi0: csi@1c09000 {
+			compatible = "allwinner,sun8i-r40-csi0",
+				     "allwinner,sun7i-a20-csi0";
+			reg = <0x01c09000 0x1000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI0>, <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI0>;
+			clock-names = "bus", "isp", "ram";
+			resets = <&ccu RST_BUS_CSI0>;
+			interconnects = <&mbus 5>;
+			interconnect-names = "dma-mem";
+			status = "disabled";
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun8i-r40-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+			<&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+			interconnects = <&mbus 4>;
+			interconnect-names = "dma-mem";
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun8i-r40-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			pinctrl-0 = <&mmc0_pins>;
+			pinctrl-names = "default";
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun8i-r40-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun8i-r40-emmc",
+				     "allwinner,sun50i-a64-emmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			pinctrl-0 = <&mmc2_pins>;
+			pinctrl-names = "default";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun8i-r40-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC3>;
+			reset-names = "ahb";
+			pinctrl-0 = <&mmc3_pins>;
+			pinctrl-names = "default";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usbphy: phy@1c13400 {
+			compatible = "allwinner,sun8i-r40-usb-phy";
+			reg = <0x01c13400 0x14>,
+			      <0x01c14800 0x4>,
+			      <0x01c19800 0x4>,
+			      <0x01c1c800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1",
+				    "pmu2";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		crypto: crypto@1c15000 {
+			compatible = "allwinner,sun8i-r40-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
+		spi2: spi@1c17000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ahci: sata@1c18000 {
+			compatible = "allwinner,sun8i-r40-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
+			resets = <&ccu RST_BUS_SATA>;
+			reset-names = "ahci";
+			status = "disabled";
+		};
+
+		ehci1: usb@1c19000 {
+			compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
+			reg = <0x01c19000 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c19400 {
+			compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
+			reg = <0x01c19400 0x100>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci2: usb@1c1c000 {
+			compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI2>;
+			resets = <&ccu RST_BUS_EHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@1c1c400 {
+			compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi3: spi@1c1f000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c1f000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun8i-r40-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		rtc: rtc@1c20400 {
+			compatible = "allwinner,sun8i-r40-rtc";
+			reg = <0x01c20400 0x400>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out";
+			clocks = <&osc32k>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun8i-r40-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			can_ph_pins: can-ph-pins {
+				pins = "PH20", "PH21";
+				function = "can";
+			};
+
+			can_pa_pins: can-pa-pins {
+				pins = "PA16", "PA17";
+				function = "can";
+			};
+
+			clk_out_a_pin: clk-out-a-pin {
+				pins = "PI12";
+				function = "clk_out_a";
+			};
+
+			/omit-if-no-ref/
+			csi0_8bits_pins: csi0-8bits-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10",
+				       "PE11";
+				function = "csi0";
+			};
+
+			/omit-if-no-ref/
+			csi0_mclk_pin: csi0-mclk-pin {
+				pins = "PE1";
+				function = "csi0";
+			};
+
+			gmac_rgmii_pins: gmac-rgmii-pins {
+				pins = "PA0", "PA1", "PA2", "PA3",
+				       "PA4", "PA5", "PA6", "PA7",
+				       "PA8", "PA10", "PA11", "PA12",
+				       "PA13", "PA15", "PA16";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PB0", "PB1";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PB18", "PB19";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PB20", "PB21";
+				function = "i2c2";
+			};
+
+			i2c3_pins: i2c3-pins {
+				pins = "PI0", "PI1";
+				function = "i2c3";
+			};
+
+			i2c4_pins: i2c4-pins {
+				pins = "PI2", "PI3";
+				function = "i2c4";
+			};
+
+			ir0_pins: ir0-pins {
+				pins = "PB4";
+				function = "ir0";
+			};
+
+			ir1_pins: ir1-pins {
+				pins = "PB23";
+				function = "ir1";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pg_pins: mmc1-pg-pins {
+				pins = "PG0", "PG1", "PG2",
+				       "PG3", "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC5", "PC6", "PC7", "PC8", "PC9",
+				       "PC10", "PC11", "PC12", "PC13", "PC14",
+				       "PC15", "PC24";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc3_pins: mmc3-pins {
+				pins = "PI4", "PI5", "PI6",
+				       "PI7", "PI8", "PI9";
+				function = "mmc3";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			spi0_pc_pins: spi0-pc-pins {
+				pins = "PC0", "PC1", "PC2";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi0_cs0_pc_pin: spi0-cs0-pc-pin {
+				pins = "PC23";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi1_pi_pins: spi1-pi-pins {
+				pins = "PI17", "PI18", "PI19";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs0_pi_pin: spi1-cs0-pi-pin {
+				pins = "PI16";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs1_pi_pin: spi1-cs1-pi-pin {
+				pins = "PI15";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB22", "PB23";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart2_pi_pins: uart2-pi-pins {
+				pins = "PI18", "PI19";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins {
+				pins = "PI16", "PI17";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart3_pg_pins: uart3-pg-pins {
+				pins = "PG6", "PG7";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
+			uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins {
+				pins = "PG8", "PG9";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
+			uart4_pg_pins: uart4-pg-pins {
+				pins = "PG10", "PG11";
+				function = "uart4";
+			};
+
+			/omit-if-no-ref/
+			uart5_ph_pins: uart5-ph-pins {
+				pins = "PH6", "PH7";
+				function = "uart5";
+			};
+
+			/omit-if-no-ref/
+			uart7_pi_pins: uart7-pi-pins {
+				pins = "PI20", "PI21";
+				function = "uart7";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@1c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		ir0: ir@1c21800 {
+			compatible = "allwinner,sun8i-r40-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01c21800 0x400>;
+			pinctrl-0 = <&ir0_pins>;
+			pinctrl-names = "default";
+			clocks = <&ccu CLK_BUS_IR0>, <&ccu CLK_IR0>;
+			clock-names = "apb", "ir";
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_IR0>;
+			status = "disabled";
+		};
+
+		ir1: ir@1c21c00 {
+			compatible = "allwinner,sun8i-r40-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01c21c00 0x400>;
+			pinctrl-0 = <&ir1_pins>;
+			pinctrl-names = "default";
+			clocks = <&ccu CLK_BUS_IR1>, <&ccu CLK_IR1>;
+			clock-names = "apb", "ir";
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_IR1>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-r40-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S0>;
+			dmas = <&dma 3>, <&dma 3>;
+			dma-names = "rx", "tx";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-r40-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S1>;
+			dmas = <&dma 4>, <&dma 4>;
+			dma-names = "rx", "tx";
+		};
+
+		i2s2: i2s@1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-r40-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S2>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "rx", "tx";
+		};
+
+		ths: thermal-sensor@1c24c00 {
+			compatible = "allwinner,sun8i-r40-ths";
+			reg = <0x01c24c00 0x100>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			/* TODO: add nvmem-cells for calibration */
+			#thermal-sensor-cells = <1>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@1c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART5>;
+			resets = <&ccu RST_BUS_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@1c29800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29800 0x400>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART6>;
+			resets = <&ccu RST_BUS_UART6>;
+			status = "disabled";
+		};
+
+		uart7: serial@1c29c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29c00 0x400>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART7>;
+			resets = <&ccu RST_BUS_UART7>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@1c2b800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b800 0x400>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		can0: can@1c2bc00 {
+			compatible = "allwinner,sun8i-r40-can";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CAN>;
+			resets = <&ccu RST_BUS_CAN>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@1c2c000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2c000 0x400>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C4>;
+			resets = <&ccu RST_BUS_I2C4>;
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun8i-r40-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+		};
+
+		gmac: ethernet@1c50000 {
+			compatible = "allwinner,sun8i-r40-gmac";
+			syscon = <&ccu>;
+			reg = <0x01c50000 0x10000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_GMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_GMAC>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+
+			gmac_mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		mbus: dram-controller@1c62000 {
+			compatible = "allwinner,sun8i-r40-mbus";
+			reg = <0x01c62000 0x1000>;
+			clocks = <&ccu 155>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x00000000 0x40000000 0x80000000>;
+			#interconnect-cells = <1>;
+		};
+
+		tcon_top: tcon-top@1c70000 {
+			compatible = "allwinner,sun8i-r40-tcon-top";
+			reg = <0x01c70000 0x1000>;
+			clocks = <&ccu CLK_BUS_TCON_TOP>,
+				 <&ccu CLK_TCON_TV0>,
+				 <&ccu CLK_TVE0>,
+				 <&ccu CLK_TCON_TV1>,
+				 <&ccu CLK_TVE1>,
+				 <&ccu CLK_DSI_DPHY>;
+			clock-names = "bus",
+				      "tcon-tv0",
+				      "tve0",
+				      "tcon-tv1",
+				      "tve1",
+				      "dsi";
+			clock-output-names = "tcon-top-tv0",
+					     "tcon-top-tv1",
+					     "tcon-top-dsi";
+			resets = <&ccu RST_BUS_TCON_TOP>;
+			#clock-cells = <1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_top_mixer0_in: port@0 {
+					reg = <0>;
+
+					tcon_top_mixer0_in_mixer0: endpoint {
+						remote-endpoint = <&mixer0_out_tcon_top>;
+					};
+				};
+
+				tcon_top_mixer0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
+						reg = <0>;
+					};
+
+					tcon_top_mixer0_out_tcon_lcd1: endpoint@1 {
+						reg = <1>;
+					};
+
+					tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>;
+					};
+
+					tcon_top_mixer0_out_tcon_tv1: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>;
+					};
+				};
+
+				tcon_top_mixer1_in: port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+
+					tcon_top_mixer1_in_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mixer1_out_tcon_top>;
+					};
+				};
+
+				tcon_top_mixer1_out: port@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
+						reg = <0>;
+					};
+
+					tcon_top_mixer1_out_tcon_lcd1: endpoint@1 {
+						reg = <1>;
+					};
+
+					tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>;
+					};
+
+					tcon_top_mixer1_out_tcon_tv1: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>;
+					};
+				};
+
+				tcon_top_hdmi_in: port@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+
+					tcon_top_hdmi_in_tcon_tv0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_tv0_out_tcon_top>;
+					};
+
+					tcon_top_hdmi_in_tcon_tv1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_tv1_out_tcon_top>;
+					};
+				};
+
+				tcon_top_hdmi_out: port@5 {
+					reg = <5>;
+
+					tcon_top_hdmi_out_hdmi: endpoint {
+						remote-endpoint = <&hdmi_in_tcon_top>;
+					};
+				};
+			};
+		};
+
+		tcon_tv0: lcd-controller@1c73000 {
+			compatible = "allwinner,sun8i-r40-tcon-tv";
+			reg = <0x01c73000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top CLK_TCON_TOP_TV0>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON_TV0>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_tv0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon_tv0_in_tcon_top_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
+					};
+
+					tcon_tv0_in_tcon_top_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>;
+					};
+				};
+
+				tcon_tv0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_tv0_out_tcon_top: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
+					};
+				};
+			};
+		};
+
+		tcon_tv1: lcd-controller@1c74000 {
+			compatible = "allwinner,sun8i-r40-tcon-tv";
+			reg = <0x01c74000 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top CLK_TCON_TOP_TV1>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON_TV1>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_tv1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon_tv1_in_tcon_top_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_top_mixer0_out_tcon_tv1>;
+					};
+
+					tcon_tv1_in_tcon_top_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_mixer1_out_tcon_tv1>;
+					};
+				};
+
+				tcon_tv1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_tv1_out_tcon_top: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_hdmi_in_tcon_tv1>;
+					};
+				};
+			};
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		hdmi: hdmi@1ee0000 {
+			compatible = "allwinner,sun8i-r40-dw-hdmi",
+				     "allwinner,sun8i-a83t-dw-hdmi";
+			reg = <0x01ee0000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>,
+				 <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
+			clock-names = "iahb", "isfr", "tmds", "cec";
+			resets = <&ccu RST_BUS_HDMI1>;
+			reset-names = "ctrl";
+			phys = <&hdmi_phy>;
+			phy-names = "phy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon_top: endpoint {
+						remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@1ef0000 {
+			compatible = "allwinner,sun8i-r40-hdmi-phy";
+			reg = <0x01ef0000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
+				 <&ccu CLK_PLL_VIDEO0>, <&ccu CLK_PLL_VIDEO1>;
+			clock-names = "bus", "mod", "pll-0", "pll-1";
+			resets = <&ccu RST_BUS_HDMI0>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/allwinner/sun8i-reference-design-tablet.dtsi
index d6bd15898db6..872d56caa9ce 100644
--- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-reference-design-tablet.dtsi
@@ -54,6 +54,7 @@
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
 		enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		power-supply = <&reg_dc1sw>;
 	};
 
 	chosen {
@@ -69,11 +70,10 @@
 	 */
 	clock-frequency = <400000>;
 
-	touchscreen: touchscreen@0 {
+	touchscreen: touchscreen@40 {
+		reg = <0x40>;
 		interrupt-parent = <&pio>;
 		interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_power_pin>;
 		power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 		/* Tablet dts must provide reg and compatible */
 		status = "disabled";
@@ -81,42 +81,20 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
-	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-	cd-inverted;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
 	status = "okay";
 };
 
-&pio {
-	mmc0_cd_pin: mmc0_cd_pin@0 {
-		pins = "PB4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	ts_power_pin: ts_power_pin@0 {
-		pins = "PH1";
-		function = "gpio_out";
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH8";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-};
-
 &r_rsb {
 	status = "okay";
 
 	axp22x: pmic@3a3 {
 		compatible = "x-powers,axp223";
 		reg = <0x3a3>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 		drivevbus-supply = <&reg_vcc5v0>;
 		x-powers,drive-vbus-en;
@@ -125,6 +103,14 @@
 
 #include "axp223.dtsi"
 
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
 &reg_aldo1 {
 	regulator-always-on;
 	regulator-min-microvolt = <3000000>;
@@ -231,9 +217,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+	usb0_id_det-gpios = <&pio 7 8 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH8 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_drivevbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-impetus.dtsi b/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-impetus.dtsi
new file mode 100644
index 000000000000..052b010a5607
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-impetus.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Matteo Scordino <matteo@elimo.io>
+ */
+
+/dts-v1/;
+#include "sun8i-v3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Elimo Impetus SoM";
+	compatible = "elimo,impetus", "sochip,s3", "allwinner,sun8i-v3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-initium.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-initium.dts
new file mode 100644
index 000000000000..039677c2cc65
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-initium.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Matteo Scordino <matteo@elimo.io>
+ */
+
+/dts-v1/;
+#include "sun8i-s3-elimo-impetus.dtsi"
+
+/ {
+	model = "Elimo Initium";
+	compatible = "elimo,initium", "elimo,impetus", "sochip,s3",
+		     "allwinner,sun8i-v3";
+
+	aliases {
+		serial1 = &uart1;
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pg_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-s3-lichee-zero-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-lichee-zero-plus.dts
new file mode 100644
index 000000000000..d18192d51d1b
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-lichee-zero-plus.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "sun8i-v3.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Sipeed Lichee Zero Plus";
+	compatible = "sipeed,lichee-zero-plus", "sochip,s3",
+		     "allwinner,sun8i-v3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
new file mode 100644
index 000000000000..e0d4404b5957
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2019 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "sun8i-v3.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "PineCube IP Camera";
+	compatible = "pine64,pinecube", "sochip,s3", "allwinner,sun8i-v3";
+
+	aliases {
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "pine64:ir:led1";
+			gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
+		};
+
+		led2 {
+			label = "pine64:ir:led2";
+			gpios = <&pio 1 12 GPIO_ACTIVE_LOW>; /* PB12 */
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vcc_wifi: vcc-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-wifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 1 2 GPIO_ACTIVE_LOW>; /* PB2 WIFI-EN */
+		vin-supply = <&reg_dcdc3>;
+		startup-delay-us = <200000>;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 WIFI-RST */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&csi1_8bit_pins>;
+	status = "okay";
+
+	port {
+		csi1_ep: endpoint {
+			remote-endpoint = <&ov5640_ep>;
+			bus-width = <8>;
+			hsync-active = <1>; /* Active high */
+			vsync-active = <0>; /* Active low */
+			data-active = <1>;  /* Active high */
+			pclk-sample = <1>;  /* Rising */
+		};
+	};
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pe_pins>;
+	status = "okay";
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&csi1_mclk_pin>;
+		clocks = <&ccu CLK_CSI1_MCLK>;
+		clock-names = "xclk";
+
+		AVDD-supply = <&reg_ldo3>;
+		DOVDD-supply = <&reg_ldo3>;
+		DVDD-supply = <&reg_ldo4>;
+		reset-gpios = <&pio 4 23 GPIO_ACTIVE_LOW>; /* PE23 */
+		powerdown-gpios = <&pio 4 24 GPIO_ACTIVE_HIGH>; /* PE24 */
+
+		port {
+			ov5640_ep: endpoint {
+				remote-endpoint = <&csi1_ep>;
+				bus-width = <8>;
+				hsync-active = <1>; /* Active high */
+				vsync-active = <0>; /* Active low */
+				data-active = <1>;  /* Active high */
+				pclk-sample = <1>;  /* Rising */
+			};
+		};
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Setup";
+		linux,code = <KEY_SETUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc_wifi>;
+	vqmmc-supply = <&reg_dcdc3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	vcc-pd-supply = <&reg_dcdc3>;
+	vcc-pe-supply = <&reg_ldo3>;
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-sys-cpu-ephy";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-dovdd-2v8-csi";
+	regulator-soft-start;
+	regulator-ramp-delay = <1600>;
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-1v8-csi";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-mangopi-mq-r-t113.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-mangopi-mq-r-t113.dts
new file mode 100644
index 000000000000..8b3a75383816
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-mangopi-mq-r-t113.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2022 Arm Ltd.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/dts-v1/;
+
+#include "sun8i-t113s.dtsi"
+#include "sunxi-d1s-t113-mangopi-mq-r.dtsi"
+
+/ {
+	model = "MangoPi MQ-R-T113";
+	compatible = "widora,mangopi-mq-r-t113", "allwinner,sun8i-t113s";
+
+	aliases {
+		ethernet0 = &rtl8189ftv;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&mmc1 {
+	rtl8189ftv: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 = WL_WAKE_AP */
+		interrupt-names = "host-wake";
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts
new file mode 100644
index 000000000000..5262102a85f6
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-t113s-netcube-nagami.dtsi"
+
+/ {
+	model = "NetCube Systems Nagami Basic Carrier Board";
+	compatible = "netcube,nagami-basic-carrier", "netcube,nagami",
+		     "allwinner,sun8i-t113s";
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2s1 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	broken-cd;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts
new file mode 100644
index 000000000000..4ffa6a0216d8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-t113s-netcube-nagami.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "NetCube Systems Nagami Keypad Carrier Board";
+	compatible = "netcube,nagami-keypad-carrier", "netcube,nagami",
+		     "allwinner,sun8i-t113s";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_status_red: led-status-red {
+			gpios = <&pio 3 16 GPIO_ACTIVE_HIGH>;  /* PD16 */
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led_status_green: led-status-green {
+			gpios = <&pio 3 22 GPIO_ACTIVE_HIGH>;  /* PD22 */
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	tca8418: keypad@34 {
+		compatible = "ti,tca8418";
+		reg = <0x34>;
+		interrupts-extended = <&pio 5 6 IRQ_TYPE_EDGE_FALLING>;  /* PF6 */
+		linux,keymap = <MATRIX_KEY(0x03, 0x00, KEY_NUMERIC_A)
+				MATRIX_KEY(0x03, 0x01, KEY_NUMERIC_1)
+				MATRIX_KEY(0x03, 0x02, KEY_NUMERIC_2)
+				MATRIX_KEY(0x03, 0x03, KEY_NUMERIC_3)
+				MATRIX_KEY(0x02, 0x00, KEY_NUMERIC_B)
+				MATRIX_KEY(0x02, 0x01, KEY_NUMERIC_4)
+				MATRIX_KEY(0x02, 0x02, KEY_NUMERIC_5)
+				MATRIX_KEY(0x02, 0x03, KEY_NUMERIC_6)
+				MATRIX_KEY(0x01, 0x00, KEY_NUMERIC_C)
+				MATRIX_KEY(0x01, 0x01, KEY_NUMERIC_7)
+				MATRIX_KEY(0x01, 0x02, KEY_NUMERIC_8)
+				MATRIX_KEY(0x01, 0x03, KEY_NUMERIC_9)
+				MATRIX_KEY(0x00, 0x00, KEY_NUMERIC_D)
+				MATRIX_KEY(0x00, 0x01, KEY_CLEAR)
+				MATRIX_KEY(0x00, 0x02, KEY_NUMERIC_0)
+				MATRIX_KEY(0x00, 0x03, KEY_OK)
+		>;
+		keypad,num-rows = <4>;
+		keypad,num-columns = <4>;
+	};
+};
+
+&pio {
+	gpio-line-names = "", "", "", "", // PA
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PB
+			  "", "", "UART3_TX", "UART3_RX",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "eMMC_CLK", "eMMC_CMD", // PC
+			  "eMMC_D2", "eMMC_D1", "eMMC_D0", "eMMC_D3",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PD
+			  "", "", "", "",
+			  "", "USB_SEC_EN", "", "",
+			  "", "", "", "",
+			  "LED_STATUS_RED", "", "", "",
+			  "I2C2_SCL", "I2C2_SDA", "LED_STATUS_GREEN", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ETH_CRSDV", "ETH_RXD0", "ETH_RXD1", "ETH_TXCK", // PE
+			  "ETH_TXD0", "ETH_TXD1", "ETH_TXEN", "",
+			  "ETH_MDC", "ETH_MDIO", "QWIIC_nINT", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PF
+			  "", "", "KEY_nINT", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG
+			  "ESP_D2", "ESP_D3", "UART1_TXD", "UART1_RXD",
+			  "ESP_nBOOT", "ESP_nRST", "I2C3_SCL", "I2C3_SDA",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi
new file mode 100644
index 000000000000..544d60cfc32e
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-t113s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NetCube Systems Nagami SoM";
+	compatible = "netcube,nagami", "allwinner,sun8i-t113s";
+
+	aliases {
+		serial1 = &uart1; // ESP32 Bootloader UART
+		serial3 = &uart3; // Console UART on Card Edge
+		ethernet0 = &emac;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	/* module wide 3.3V supply directly from the card edge */
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* SY8008 DC/DC regulator on the board, also supplying VDD-SYS */
+	reg_vcc_core: regulator-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-core";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		vin-supply = <&reg_vcc3v3>;
+	};
+
+	/* USB0 MUX to switch connect to Card-Edge only after BootROM */
+	usb0_sec_mux: mux-controller{
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		mux-gpios = <&pio 3 9 GPIO_ACTIVE_HIGH>; /* PD9 */
+		idle-state = <1>; /* USB connected to Card-Edge by default */
+	};
+
+	/* Reset of ESP32 */
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>; /* PG9 */
+		post-power-on-delay-ms = <1500>;
+		power-off-delay-us = <200>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&dcxo {
+	clock-frequency = <24000000>;
+};
+
+&emac {
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+	phy-handle = <&lan8720a>;
+	phy-mode = "rmii";
+	pinctrl-0 = <&rmii_pe_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Default I2C Interface on Card-Edge */
+&i2c2 {
+	pinctrl-0 = <&i2c2_pd_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+/* Exposed as the QWIIC connector and used by the internal EEPROM */
+&i2c3 {
+	pinctrl-0 = <&i2c3_pg_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c02";		/* actually it's a 24AA02E48 */
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc3v3>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		eth0_macaddress: macaddress@fa {
+			reg = <0xfa 0x06>;
+		};
+	};
+};
+
+/* Default I2S Interface on Card-Edge */
+&i2s1 {
+	pinctrl-0 = <&i2s1_pins>, <&i2s1_din0_pin>, <&i2s1_dout0_pin>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+/* Phy is on SoM. MDI signals pre-magnetics are on the card edge */
+&mdio {
+	lan8720a: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+/* Default SD Interface on Card-Edge */
+&mmc0 {
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+/* Connected to the on-board ESP32 */
+&mmc1 {
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+};
+
+/* Connected to the on-board eMMC */
+&mmc2 {
+	pinctrl-0 = <&mmc2_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pd-supply = <&reg_vcc3v3>;
+	vcc-pe-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+
+	gpio-line-names = "", "", "", "", // PA
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "CAN0_TX", "CAN0_RX", // PB
+			  "CAN1_TX", "CAN1_RX", "UART3_TX", "UART3_RX",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "eMMC_CLK", "eMMC_CMD", // PC
+			  "eMMC_D2", "eMMC_D1", "eMMC_D0", "eMMC_D3",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PD
+			  "", "", "", "",
+			  "", "USB_SEC_EN", "SPI1_CS", "SPI1_CLK",
+			  "SPI1_MOSI", "SPI1_MISO", "SPI1_HOLD", "SPI1_WP",
+			  "PD16", "", "", "",
+			  "I2C2_SCL", "I2C2_SDA", "PD22", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ETH_CRSDV", "ETH_RXD0", "ETH_RXD1", "ETH_TXCK", // PE
+			  "ETH_TXD0", "ETH_TXD1", "ETH_TXEN", "",
+			  "ETH_MDC", "ETH_MDIO", "QWIIC_nINT", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "SD_D1", "SD_D0", "SD_CLK", "SD_CLK", // PF
+			  "SD_D3", "SD_D2", "PF6", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG
+			  "ESP_D2", "ESP_D3", "UART1_TXD", "UART1_RXD",
+			  "ESP_nBOOT", "ESP_nRST", "I2C3_SCL", "I2C3_SDA",
+			  "I2S1_WS", "I2S1_CLK", "I2S1_DIN0", "I2S1_DOUT0",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+/* Remove the unused CK pin from the pinctl as it is unconnected */
+&rmii_pe_pins {
+	pins = "PE0", "PE1", "PE2", "PE3", "PE4",
+	       "PE5", "PE6", "PE8", "PE9";
+};
+
+/* Default SPI Interface on Card-Edge */
+&spi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-0 = <&spi1_pins>, <&spi1_hold_pin>, <&spi1_wp_pin>;
+	pinctrl-names = "default";
+	cs-gpios = <0>;
+	status = "disabled";
+};
+
+/* Connected to the Bootloader/Console of the ESP32 */
+&uart1 {
+	pinctrl-0 = <&uart1_pg6_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Console/Debug UART on Card-Edge */
+&uart3 {
+	pinctrl-0 = <&uart3_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s.dtsi b/arch/arm/boot/dts/allwinner/sun8i-t113s.dtsi
new file mode 100644
index 000000000000..c7181308ae6f
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2022 Arm Ltd.
+
+#define SOC_PERIPHERAL_IRQ(nr) GIC_SPI nr
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <riscv/allwinner/sunxi-d1s-t113.dtsi>
+#include <riscv/allwinner/sunxi-d1-t113.dtsi>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+		};
+	};
+
+	gic: interrupt-controller@1c81000 {
+		compatible = "arm,gic-400";
+		reg = <0x03021000 0x1000>,
+		      <0x03022000 0x2000>,
+		      <0x03024000 0x2000>,
+		      <0x03026000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t3-cqa3t-bv3.dts b/arch/arm/boot/dts/allwinner/sun8i-t3-cqa3t-bv3.dts
new file mode 100644
index 000000000000..9f472521f4a4
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t3-cqa3t-bv3.dts
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ * Copyright (C) 2018 Hao Zhang <hao5781286@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "t3-cqa3t-bv3";
+	compatible = "qihua,t3-cqa3t-bv3", "allwinner,sun8i-t3",
+		     "allwinner,sun8i-r40";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+		enable-active-high;
+	};
+};
+
+&ahci {
+	ahci-supply = <&reg_dldo4>;
+	phy-supply = <&reg_eldo3>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp22x: pmic@34 {
+		compatible = "x-powers,axp221";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-pa";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pg";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-dldo3";
+};
+
+&reg_eldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-pe";
+};
+
+&tcon_tv0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	usb2_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3-sl631-imx179.dts b/arch/arm/boot/dts/allwinner/sun8i-v3-sl631-imx179.dts
new file mode 100644
index 000000000000..117aeece4e55
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3-sl631-imx179.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2020 Paul Kocialkowski <contact@paulk.fr>
+ */
+
+#include "sun8i-v3-sl631.dtsi"
+
+/ {
+	model = "SL631 Action Camera with IMX179";
+	compatible = "allwinner,sl631-imx179", "allwinner,sl631",
+		     "allwinner,sun8i-v3";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3-sl631.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3-sl631.dtsi
new file mode 100644
index 000000000000..6f93f8c49f84
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3-sl631.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2020 Paul Kocialkowski <contact@paulk.fr>
+ */
+
+/dts-v1/;
+
+#include "sun8i-v3.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "SL631 Action Camera";
+	compatible = "allwinner,sl631", "allwinner,sun8i-v3";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pb_pins>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-174 {
+		label = "Down";
+		linux,code = <KEY_DOWN>;
+		channel = <0>;
+		voltage = <174603>;
+	};
+
+	button-384 {
+		label = "Up";
+		linux,code = <KEY_UP>;
+		channel = <0>;
+		voltage = <384126>;
+	};
+
+	button-593 {
+		label = "OK";
+		linux,code = <KEY_OK>;
+		channel = <0>;
+		voltage = <593650>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	vmmc-supply = <&reg_dcdc3>;
+	status = "okay";
+};
+
+&pio {
+	vcc-pd-supply = <&reg_dcdc3>;
+	vcc-pe-supply = <&reg_dcdc3>;
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-sys-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vdd-3v3";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pg_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3.dtsi
new file mode 100644
index 000000000000..95bd0b616349
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3.dtsi
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
+ * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org>
+ */
+
+#include "sun8i-v3s.dtsi"
+
+/ {
+	soc {
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-v3-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 3>, <&dma 3>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_pins>;
+			resets = <&ccu RST_BUS_I2S0>;
+			status = "disabled";
+		};
+	};
+};
+
+&ccu {
+	compatible = "allwinner,sun8i-v3-ccu";
+};
+
+&codec_analog {
+	compatible = "allwinner,sun8i-v3-codec-analog",
+		     "allwinner,sun8i-h3-codec-analog";
+};
+
+&emac {
+	/delete-property/ phy-handle;
+	/delete-property/ phy-mode;
+};
+
+&mdio_mux {
+	external_mdio: mdio@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&pio {
+	compatible = "allwinner,sun8i-v3-pinctrl";
+
+	i2s0_pins: i2s0-pins {
+		pins = "PG10", "PG11", "PG12", "PG13";
+		function = "i2s";
+	};
+
+	/omit-if-no-ref/
+	lcd_rgb666_pd_pins: lcd-rgb666-pd-pins {
+		pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5",
+		       "PD6", "PD7", "PD8", "PD9", "PD10", "PD11",
+		       "PD12", "PD13", "PD14", "PD15", "PD16", "PD17",
+		       "PD18", "PD19", "PD20", "PD21";
+		function = "lcd";
+	};
+
+	uart1_pg_pins: uart1-pg-pins {
+		pins = "PG6", "PG7";
+		function = "uart1";
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s-anbernic-rg-nano.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-anbernic-rg-nano.dts
new file mode 100644
index 000000000000..f34dfdf1566d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-anbernic-rg-nano.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include "sun8i-v3s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Anbernic RG Nano";
+	compatible = "anbernic,rg-nano", "allwinner,sun8i-v3s";
+
+	aliases {
+		rtc0 = &pcf8563;
+		rtc1 = &rtc;
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1 2 3 8 14 21 32 46 60 80 100>;
+		default-brightness-level = <11>;
+		power-supply = <&reg_vcc5v0>;
+		pwms = <&pwm 0 40000 1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		button-a {
+			gpios = <&gpio_expander 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-A";
+			linux,code = <BTN_EAST>;
+		};
+
+		button-b {
+			gpios = <&gpio_expander 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-B";
+			linux,code = <BTN_SOUTH>;
+		};
+
+		button-down {
+			gpios = <&gpio_expander 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+
+		button-left {
+			gpios = <&gpio_expander 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+
+		button-right {
+			gpios = <&gpio_expander 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+
+		button-se {
+			gpios = <&gpio_expander 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-SELECT";
+			linux,code = <BTN_SELECT>;
+		};
+
+		button-st {
+			gpios = <&gpio_expander 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-START";
+			linux,code = <BTN_START>;
+		};
+
+		button-tl {
+			gpios = <&gpio_expander 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-L";
+			linux,code = <BTN_TL>;
+		};
+
+		button-tr {
+			gpios = <&gpio_expander 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-R";
+			linux,code = <BTN_TR>;
+		};
+
+		button-up {
+			gpios = <&gpio_expander 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+
+		button-x {
+			gpios = <&gpio_expander 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-X";
+			linux,code = <BTN_NORTH>;
+		};
+
+		button-y {
+			gpios = <&gpio_expander 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-Y";
+			linux,code = <BTN_WEST>;
+		};
+	};
+};
+
+&codec {
+	allwinner,audio-routing = "Speaker", "HP",
+				  "MIC1", "Mic",
+				  "Mic", "HBIAS";
+	allwinner,pa-gpios = <&pio 5 6 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PF6 */
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	gpio_expander: gpio@20 {
+		compatible = "nxp,pcal6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <1 3 IRQ_TYPE_EDGE_BOTH>; /* PB3/EINT3 */
+		vcc-supply = <&reg_vcc3v3>;
+	};
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&pio>;
+		interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5/EINT5 */
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+
+	spi0_no_miso_pins: spi0-no-miso-pins {
+		pins = "PC1", "PC2", "PC3";
+		function = "spi0";
+	};
+};
+
+&pwm {
+	pinctrl-0 = <&pwm0_pin>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* DCDC2 wired into vdd-cpu, vdd-sys, and vdd-ephy. */
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-max-microvolt = <1250000>;
+	regulator-min-microvolt = <1250000>;
+	regulator-name = "vdd-cpu";
+};
+
+/* DCDC3 wired into every 3.3v input that isn't the RTC. */
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-max-microvolt = <3300000>;
+	regulator-min-microvolt = <3300000>;
+	regulator-name = "vcc-io";
+};
+
+/* LDO1 wired into RTC, voltage is hard-wired at 3.3v. */
+&reg_ldo1 {
+	regulator-always-on;
+	regulator-name = "vcc-rtc";
+};
+
+/* LDO2 wired into VCC-PLL and audio codec. */
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-max-microvolt = <3000000>;
+	regulator-min-microvolt = <3000000>;
+	regulator-name = "vcc-pll";
+};
+
+/* LDO3, LDO4, and LDO5 unused. */
+&reg_ldo3 {
+	status = "disabled";
+};
+
+&reg_ldo4 {
+	status = "disabled";
+};
+
+/* RTC uses internal oscillator */
+&rtc {
+	/delete-property/ clocks;
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_no_miso_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	display@0 {
+		compatible = "saef,sftc154b", "panel-mipi-dbi-spi";
+		reg = <0>;
+		backlight = <&backlight>;
+		dc-gpios = <&pio 2 0 GPIO_ACTIVE_HIGH>; /* PC0 */
+		reset-gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+		spi-max-frequency = <100000000>;
+
+		height-mm = <39>;
+		width-mm = <39>;
+
+		/* Set hb-porch to compensate for non-visible area */
+		panel-timing {
+			hactive = <240>;
+			vactive = <240>;
+			hback-porch = <80>;
+			vback-porch = <0>;
+			clock-frequency = <0>;
+			hfront-porch = <0>;
+			hsync-len = <0>;
+			vfront-porch = <0>;
+			vsync-len = <0>;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG5 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero-dock.dts
index d1311098ea45..752ad05c8f83 100644
--- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero-dock.dts
@@ -49,16 +49,18 @@
 	compatible = "licheepi,licheepi-zero-dock", "licheepi,licheepi-zero",
 		     "allwinner,sun8i-v3s";
 
+	aliases {
+		ethernet0 = &emac;
+	};
+
 	leds {
 		/* The LEDs use PG0~2 pins, which conflict with MMC1 */
-		status = "disbaled";
+		status = "disabled";
 	};
 };
 
-&mmc1 {
-	broken-cd;
-	bus-width = <4>;
-	vmmc-supply = <&reg_vcc3v3>;
+&emac {
+	allwinner,leds-active-low;
 	status = "okay";
 };
 
@@ -66,31 +68,38 @@
 	vref-supply = <&reg_vcc3v0>;
 	status = "okay";
 
-	button@200 {
+	button-200 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <200000>;
 	};
 
-	button@400 {
+	button-400 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
 		voltage = <400000>;
 	};
 
-	button@600 {
+	button-600 {
 		label = "Select";
 		linux,code = <KEY_SELECT>;
 		channel = <0>;
 		voltage = <600000>;
 	};
 
-	button@800 {
+	button-800 {
 		label = "Start";
 		linux,code = <KEY_OK>;
 		channel = <0>;
 		voltage = <800000>;
 	};
 };
+
+&mmc1 {
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero.dts
index 387fc2aa546d..2e4587d26ce5 100644
--- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero.dts
@@ -78,8 +78,6 @@
 };
 
 &mmc0 {
-	pinctrl-0 = <&mmc0_pins_a>;
-	pinctrl-names = "default";
 	broken-cd;
 	bus-width = <4>;
 	vmmc-supply = <&reg_vcc3v3>;
@@ -87,7 +85,7 @@
 };
 
 &uart0 {
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	pinctrl-names = "default";
 	status = "okay";
 };
@@ -98,6 +96,6 @@
 };
 
 &usbphy {
-	usb0_id_det-gpio = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts
new file mode 100644
index 000000000000..cb6292319f39
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-v3s.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/{
+	model = "NetCube Systems Kumquat";
+	compatible = "netcube,kumquat", "allwinner,sun8i-v3s";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &emac;
+		rtc0 = &ds3232;
+		rtc1 = &rtc; /* not battery backed */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* 40 MHz Crystal Oscillator on PCB */
+	clk_can0: clock-can0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-user {
+			label = "GPIO Key User";
+			linux,code = <KEY_PROG1>;
+			gpios = <&pio 1 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PB2 */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-heartbeat {
+			gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */
+			linux,default-trigger = "heartbeat";
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+
+		led-mmc0-act {
+			gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+			linux,default-trigger = "mmc0";
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DISK;
+		};
+	};
+
+	/* EA3036C Switching 3 Channel Regulator - Channel 2 */
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	/* K7805-1000R3 Switching Regulator supplied from main 12/24V terminal block */
+	reg_vcc5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Headphone", "HPCOM",
+		"MIC1", "Mic",
+		"Mic", "HBIAS";
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&emac {
+	allwinner,leds-active-low;
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c02";		/* actually it's a 24AA02E48 */
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc3v3>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		eth0_macaddress: macaddress@fa {
+			reg = <0xfa 0x06>;
+		};
+	};
+
+	tusb320: typec@60 {
+		compatible = "ti,tusb320";
+		reg = <0x60>;
+		interrupts-extended = <&pio 1 5 IRQ_TYPE_LEVEL_LOW>;  /* PB5 */
+	};
+
+	ds3232: rtc@68 {
+		compatible = "dallas,ds3232";
+		reg = <0x68>;
+	};
+};
+
+/* Exposed as the Flash/SD Header on the board */
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+/* Connected to the on-board ESP32 */
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+/* Disable external 32k osc as it is broken on current revision */
+&osc32k {
+	status = "disabled";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pe-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+
+	gpio-line-names = "", "", "", "", // PA
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "CAN_nCS", "CAN_nINT", "USER_SW", "PB3", // PB
+			  "USB_ID", "USBC_nINT", "I2C0_SCL", "I2C0_SDA",
+			  "UART0_TX", "UART0_RX", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "SPI_MISO", "SPI_SCK", "FLASH_nCS", "SPI_MOSI", // PC
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PD
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "Q12", "Q11", "Q10", "Q9", // PE
+			  "LED_SYS0", "I1", "Q1", "Q2",
+			  "I2", "I3", "Q3", "Q4",
+			  "I4", "I5", "Q5", "Q6",
+			  "I6", "I7", "Q7", "Q8",
+			  "I8", "UART1_TXD", "UART1_RXD", "ESP_nRST",
+			  "ESP_nBOOT", "", "", "",
+			  "", "", "", "",
+			  "SD_D1", "SD_D0", "SD_CLK", "SD_CMD", // PF
+			  "SD_D3", "SD_D2", "LED_SYS1", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG
+			  "ESP_D2", "ESP_D3", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+/* Disable external 32k osc as it is broken on current revision */
+&rtc {
+	/delete-property/ clocks;
+};
+
+/* Exposed as a USB-C connector with USB-Serial converter */
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Connected to the Bootloader/Console of the ESP32 */
+&uart1 {
+	pinctrl-0 = <&uart1_pe_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	extcon = <&tusb320 0>;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	status = "okay";
+};
+
+&spi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <0>, <&pio 1 0 GPIO_ACTIVE_LOW>; /* PB0 */
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		label = "firmware";
+		spi-max-frequency = <40000000>;
+	};
+
+	can@1 {
+		compatible = "microchip,mcp2518fd";
+		reg = <1>;
+		clocks = <&clk_can0>;
+		interrupts-extended = <&pio 1 1 IRQ_TYPE_LEVEL_LOW>;  /* PB1 */
+		spi-max-frequency = <20000000>;
+		vdd-supply = <&reg_vcc3v3>;
+		xceiver-supply = <&reg_vcc3v3>;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
new file mode 100644
index 000000000000..fa54510319ac
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
@@ -0,0 +1,671 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun8i-v3s-ccu.h>
+#include <dt-bindings/reset/sun8i-v3s-ccu.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-lcd {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "mixer0-lcd0";
+			clocks = <&display_clocks CLK_MIXER0>,
+				 <&ccu CLK_TCON0>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun8i-v3s-display-engine";
+		allwinner,pipelines = <&mixer0>;
+		status = "disabled";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <50000>;
+			clock-output-names = "ext-osc32k";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		display_clocks: clock@1000000 {
+			compatible = "allwinner,sun8i-v3s-de2-clk";
+			reg = <0x01000000 0x10000>;
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_DE>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-v3s-de2-mixer";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks 0>,
+				 <&display_clocks 6>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					reg = <1>;
+
+					mixer0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		syscon: system-control@1c00000 {
+			compatible = "allwinner,sun8i-v3s-system-control",
+				     "allwinner,sun8i-h3-system-control";
+			reg = <0x01c00000 0xd0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+		};
+
+		nmi_intc: interrupt-controller@1c000d0 {
+			compatible = "allwinner,sun8i-v3s-nmi",
+				     "allwinner,sun9i-a80-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01c000d0 0x0c>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-v3s-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun8i-v3s-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>,
+				 <&ccu CLK_TCON0>;
+			clock-names = "ahb",
+				      "tcon-ch0";
+			clock-output-names = "tcon-data-clock";
+			#clock-cells = <0>;
+			resets = <&ccu RST_BUS_TCON0>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint {
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
+		};
+
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		crypto@1c15000 {
+			compatible = "allwinner,sun8i-v3s-crypto",
+				     "allwinner,sun8i-a33-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 16>, <&dma 16>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_CE>;
+			reset-names = "ahb";
+		};
+
+		usb_otg: usb@1c19000 {
+			compatible = "allwinner,sun8i-h3-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			compatible = "allwinner,sun8i-v3s-usb-phy";
+			reg = <0x01c19400 0x2c>,
+			      <0x01c1a800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0";
+			clocks = <&ccu CLK_USB_PHY0>;
+			clock-names = "usb0_phy";
+			resets = <&ccu RST_USB_PHY0>;
+			reset-names = "usb0_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci: usb@1c1a000 {
+			compatible = "allwinner,sun8i-v3s-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci: usb@1c1a400 {
+			compatible = "allwinner,sun8i-v3s-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun8i-v3s-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		rtc: rtc@1c20400 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-v3-rtc";
+			reg = <0x01c20400 0x54>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc32k>;
+			clock-output-names = "osc32k", "osc32k-out";
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun8i-v3s-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			/omit-if-no-ref/
+			csi0_mclk_pin: csi0-mclk-pin {
+				pins = "PE20";
+				function = "csi_mipi";
+			};
+
+			/omit-if-no-ref/
+			csi1_8bit_pins: csi1-8bit-pins {
+				pins = "PE0", "PE2", "PE3", "PE8", "PE9",
+				       "PE10", "PE11", "PE12", "PE13", "PE14",
+				       "PE15";
+				function = "csi";
+			};
+
+			/omit-if-no-ref/
+			csi1_mclk_pin: csi1-mclk-pin {
+				pins = "PE1";
+				function = "csi";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PB6", "PB7";
+				function = "i2c0";
+			};
+
+			/omit-if-no-ref/
+			i2c1_pb_pins: i2c1-pb-pins {
+				pins = "PB8", "PB9";
+				function = "i2c1";
+			};
+
+			/omit-if-no-ref/
+			i2c1_pe_pins: i2c1-pe-pins {
+				pins = "PE21", "PE22";
+				function = "i2c1";
+			};
+
+			/omit-if-no-ref/
+			lcd_rgb666_pe_pins: lcd-rgb666-pe-pins {
+				pins = "PE0", "PE1", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10", "PE11",
+				       "PE12", "PE13", "PE14", "PE15", "PE16", "PE17",
+				       "PE18", "PE19", "PE23", "PE24";
+				function = "lcd";
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB8", "PB9";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart1_pe_pins: uart1-pe-pins {
+				pins = "PE21", "PE22";
+				function = "uart1";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "PB0", "PB1";
+				function = "uart2";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			pwm0_pin: pwm0-pin {
+				pins = "PB4";
+				function = "pwm0";
+			};
+
+			/omit-if-no-ref/
+			pwm1_pin: pwm1-pin {
+				pins = "PB5";
+				function = "pwm1";
+			};
+
+			spi0_pins: spi0-pins {
+				pins = "PC0", "PC1", "PC2", "PC3";
+				function = "spi0";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun8i-v3s-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt0: watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun8i-v3s-pwm",
+				     "allwinner,sun7i-a20-pwm";
+			reg = <0x01c21400 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-v3s-codec";
+			reg = <0x01c22c00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			allwinner,codec-analog-controls = <&codec_analog>;
+			status = "disabled";
+		};
+
+		codec_analog: codec-analog@1c23000 {
+			compatible = "allwinner,sun8i-v3s-codec-analog";
+			reg = <0x01c23000 0x4>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "tx", "rx";
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "tx", "rx";
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "tx", "rx";
+			resets = <&ccu RST_BUS_UART2>;
+			pinctrl-0 = <&uart2_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun8i-v3s-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			phy-handle = <&int_mii_phy>;
+			phy-mode = "mii";
+			status = "disabled";
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+			};
+
+			mdio_mux: mdio-mux {
+				compatible = "allwinner,sun8i-h3-mdio-mux";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mdio-parent-bus = <&mdio>;
+				/* Only one MDIO is usable at the time */
+				internal_mdio: mdio@1 {
+					compatible = "allwinner,sun8i-h3-mdio-internal";
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					int_mii_phy: ethernet-phy@1 {
+						compatible = "ethernet-phy-ieee802.3-c22";
+						reg = <1>;
+						clocks = <&ccu CLK_BUS_EPHY>;
+						resets = <&ccu RST_BUS_EPHY>;
+					};
+				};
+			};
+		};
+
+		spi0: spi@1c68000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c68000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins>;
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		csi1: camera@1cb4000 {
+			compatible = "allwinner,sun8i-v3s-csi";
+			reg = <0x01cb4000 0x3000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/allwinner/sun8i-v40-bananapi-m2-berry.dts
new file mode 100644
index 000000000000..6575ef274453
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v40-bananapi-m2-berry.dts
@@ -0,0 +1,310 @@
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Banana Pi M2 Berry";
+	compatible = "sinovoip,bpi-m2-berry", "allwinner,sun8i-r40";
+
+	aliases {
+		ethernet0 = &gmac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr-led {
+			label = "bananapi:red:pwr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		user-led {
+			label = "bananapi:green:user";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+		enable-active-high;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ahci {
+	ahci-supply = <&reg_dldo4>;
+	phy-supply = <&reg_eldo3>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	/* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_dc1sw>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp22x: pmic@34 {
+		compatible = "x-powers,axp221";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo2>;
+	vqmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clk_out_a_pin>;
+	vcc-pa-supply = <&reg_aldo2>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_eldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo1>;
+};
+
+&reg_aldo2 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-pa";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-gmac-phy";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+/*
+ * Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same
+ * time, with the two being in sync, to be able to meet maximum power
+ * consumption during transmits. Since this is not really supported
+ * right now, just use the two as always on, and we will fix it later.
+ */
+
+&reg_dldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-2";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vdd2v5-sata";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd1v2-sata";
+};
+
+&tcon_tv0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo2>;
+		vddio-supply = <&reg_dldo1>;
+		device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		/* TODO host wake line connected to PMIC GPIO pins */
+		shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+		max-speed = <1500000>;
+	};
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts
index 3741ac71c3d6..52ad95a2063a 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts
@@ -62,21 +62,57 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_cubieboard4>;
 
-		green {
+		led-0 {
 			label = "cubieboard4:green:usr";
 			gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>; /* PH17 */
 		};
 
-		red {
+		led-1 {
 			label = "cubieboard4:red:usr";
 			gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	vga-connector {
+		compatible = "vga-connector";
+		label = "vga";
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_dac_out>;
+			};
+		};
+	};
+
+	vga-dac {
+		compatible = "corpro,gm7123", "adi,adv7123";
+		vdd-supply = <&reg_dcdc1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_dac_in: endpoint {
+					remote-endpoint = <&tcon0_out_vga>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_dac_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&ac100_rtc 1>;
 		clock-names = "ext_clock";
@@ -85,19 +121,43 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_cldo1>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */
-	cd-inverted;
+	cd-gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; /* PH18 */
 	status = "okay";
 };
 
 &mmc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>, <&wifi_en_pin_cubieboard4>;
+	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&reg_dldo1>;
 	vqmmc-supply = <&reg_cldo3>;
 	mmc-pwrseq = <&wifi_pwrseq>;
@@ -131,16 +191,14 @@
 };
 
 &pio {
-	led_pins_cubieboard4: led-pins@0 {
-		pins = "PH6", "PH17";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
-		pins = "PH18";
-		function = "gpio_in";
-		bias-pull-up;
-	};
+	vcc-pa-supply = <&reg_ldo_io1>;
+	vcc-pb-supply = <&reg_aldo2>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dc1sw>;
+	vcc-pe-supply = <&reg_eldo2>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_ldo_io0>;
+	vcc-ph-supply = <&reg_dcdc1>;
 };
 
 &r_ir {
@@ -148,10 +206,8 @@
 };
 
 &r_pio {
-	wifi_en_pin_cubieboard4: wifi_en_pin@0 {
-		pins = "PL2";
-		function = "gpio_out";
-	};
+	vcc-pl-supply = <&reg_dldo2>;
+	vcc-pm-supply = <&reg_eldo3>;
 };
 
 &r_rsb {
@@ -184,6 +240,10 @@
 				/* unused */
 			};
 
+			reg_dc1sw: dc1sw {
+				regulator-name = "vcc-pd";
+			};
+
 			reg_dc5ldo: dc5ldo {
 				regulator-always-on;
 				regulator-min-microvolt = <800000>;
@@ -220,8 +280,8 @@
 
 			reg_dcdc5: dcdc5 {
 				regulator-always-on;
-				regulator-min-microvolt = <1425000>;
-				regulator-max-microvolt = <1575000>;
+				regulator-min-microvolt = <1450000>;
+				regulator-max-microvolt = <1550000>;
 				regulator-name = "vcc-dram";
 			};
 
@@ -238,7 +298,6 @@
 			};
 
 			reg_dldo2: dldo2 {
-				regulator-always-on;
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3000000>;
 				regulator-name = "vcc-pl";
@@ -257,14 +316,12 @@
 			};
 
 			reg_eldo3: eldo3 {
-				regulator-always-on;
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3000000>;
 				regulator-name = "vcc-pm-codec-io1";
 			};
 
 			reg_ldo_io0: ldo_io0 {
-				regulator-always-on;
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3000000>;
 				regulator-name = "vcc-pg";
@@ -352,6 +409,14 @@
 				 */
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
+				/*
+				 * The PHY requires 20ms after all voltages
+				 * are applied until core logic is ready and
+				 * 30ms after the reset pin is de-asserted.
+				 * Set a 100ms delay to account for PMIC
+				 * ramp time and board traces.
+				 */
+				regulator-enable-ramp-delay = <100000>;
 				regulator-name = "vcc-gmac-phy";
 			};
 
@@ -425,8 +490,19 @@
 
 #include "axp809.dtsi"
 
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd0_rgb888_pins>;
+};
+
+&tcon0_out {
+	tcon0_out_vga: endpoint {
+		remote-endpoint = <&vga_dac_in>;
+	};
+};
+
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/allwinner/sun9i-a80-optimus.dts
index 85f1ad670310..5c3580d712e4 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/allwinner/sun9i-a80-optimus.dts
@@ -62,11 +62,8 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_optimus>, <&led_r_pins_optimus>;
 
 		/* The LED names match those found on the board */
-
 		led2 {
 			label = "optimus:led2:usr";
 			gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
@@ -85,8 +82,6 @@
 
 	reg_usb1_vbus: usb1-vbus {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb1_vbus_pin_optimus>;
 		regulator-name = "usb1-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -96,8 +91,6 @@
 
 	reg_usb3_vbus: usb3-vbus {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb3_vbus_pin_optimus>;
 		regulator-name = "usb3-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -105,7 +98,7 @@
 		gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: wifi-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&ac100_rtc 1>;
 		clock-names = "ext_clock";
@@ -127,19 +120,33 @@
 	status = "okay";
 };
 
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_cldo1>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */
-	cd-inverted;
+	cd-gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; /* PH8 */
 	status = "okay";
 };
 
 &mmc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>, <&wifi_en_pin_optimus>;
+	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&reg_dldo1>;
 	vqmmc-supply = <&reg_cldo3>;
 	mmc-pwrseq = <&wifi_pwrseq>;
@@ -181,26 +188,14 @@
 };
 
 &pio {
-	led_pins_optimus: led-pins@0 {
-		pins = "PH0", "PH1";
-		function = "gpio_out";
-	};
-
-	mmc0_cd_pin_optimus: mmc0_cd_pin@0 {
-		pins = "PH18";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb1_vbus_pin_optimus: usb1_vbus_pin@1 {
-		pins = "PH4";
-		function = "gpio_out";
-	};
-
-	usb3_vbus_pin_optimus: usb3_vbus_pin@1 {
-		pins = "PH5";
-		function = "gpio_out";
-	};
+	vcc-pa-supply = <&reg_ldo_io1>;
+	vcc-pb-supply = <&reg_aldo2>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_eldo2>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_ldo_io0>;
+	vcc-ph-supply = <&reg_dcdc1>;
 };
 
 &r_ir {
@@ -208,15 +203,8 @@
 };
 
 &r_pio {
-	led_r_pins_optimus: led-pins@1 {
-		pins = "PM15";
-		function = "gpio_out";
-	};
-
-	wifi_en_pin_optimus: wifi_en_pin@0 {
-		pins = "PL2";
-		function = "gpio_out";
-	};
+	vcc-pl-supply = <&reg_dldo2>;
+	vcc-pm-supply = <&reg_eldo3>;
 };
 
 &r_rsb {
@@ -256,6 +244,10 @@
 				regulator-name = "vdd-cpus-09-usbh";
 			};
 
+			dc1sw {
+				/* unused */
+			};
+
 			reg_dcdc1: dcdc1 {
 				regulator-always-on;
 				regulator-min-microvolt = <3000000>;
@@ -303,7 +295,6 @@
 			};
 
 			reg_dldo2: dldo2 {
-				regulator-always-on;
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3000000>;
 				regulator-name = "vcc-pl";
@@ -322,14 +313,12 @@
 			};
 
 			reg_eldo3: eldo3 {
-				regulator-always-on;
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3000000>;
 				regulator-name = "vcc-pm-codec-io1";
 			};
 
 			reg_ldo_io0: ldo_io0 {
-				regulator-always-on;
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3000000>;
 				regulator-name = "vcc-pg";
@@ -417,6 +406,14 @@
 				 */
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
+				/*
+				 * The PHY requires 20ms after all voltages
+				 * are applied until core logic is ready and
+				 * 30ms after the reset pin is de-asserted.
+				 * Set a 100ms delay to account for PMIC
+				 * ramp time and board traces.
+				 */
+				regulator-enable-ramp-delay = <100000>;
 				regulator-name = "vcc-gmac-phy";
 			};
 
@@ -492,7 +489,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi b/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi
new file mode 100644
index 000000000000..a1ae0929cec9
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi
@@ -0,0 +1,1253 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/clock/sun9i-a80-ccu.h>
+#include <dt-bindings/clock/sun9i-a80-de.h>
+#include <dt-bindings/clock/sun9i-a80-usb.h>
+#include <dt-bindings/reset/sun9i-a80-ccu.h>
+#include <dt-bindings/reset/sun9i-a80-de.h>
+#include <dt-bindings/reset/sun9i-a80-usb.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		ethernet0 = &gmac;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			cci-control-port = <&cci_control0>;
+			clock-frequency = <12000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			cci-control-port = <&cci_control0>;
+			clock-frequency = <12000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x1>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			cci-control-port = <&cci_control0>;
+			clock-frequency = <12000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			cci-control-port = <&cci_control0>;
+			clock-frequency = <12000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x3>;
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			cci-control-port = <&cci_control1>;
+			clock-frequency = <18000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x100>;
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			cci-control-port = <&cci_control1>;
+			clock-frequency = <18000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x101>;
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			cci-control-port = <&cci_control1>;
+			clock-frequency = <18000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x102>;
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			cci-control-port = <&cci_control1>;
+			clock-frequency = <18000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x103>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/*
+		 * map 64 bit address range down to 32 bits,
+		 * as the peripherals are all under 512MB.
+		 */
+		ranges = <0 0 0 0x20000000>;
+
+		/*
+		 * This clock is actually configurable from the PRCM address
+		 * space. The external 24M oscillator can be turned off, and
+		 * the clock switched to an internal 16M RC oscillator. Under
+		 * normal operation there's no reason to do this, and the
+		 * default is to use the external good one, so just model this
+		 * as a fixed clock. Also it is not entirely clear if the
+		 * osc24M mux in the PRCM affects the entire clock tree, which
+		 * would also throw all the PLL clock rates off, or just the
+		 * downstream clocks in the PRCM.
+		 */
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		/*
+		 * The 32k clock is from an external source, normally the
+		 * AC100 codec/RTC chip. This serves as a placeholder for
+		 * board dts files to specify the source.
+		 */
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <1>;
+			clock-mult = <1>;
+			clock-output-names = "osc32k";
+		};
+
+		/*
+		 * The following two are dummy clocks, placeholders
+		 * used in the gmac_tx clock. The gmac driver will
+		 * choose one parent depending on the PHY interface
+		 * mode, using clk_set_rate auto-reparenting.
+		 *
+		 * The actual TX clock rate is not controlled by the
+		 * gmac_tx clock.
+		 */
+		mii_phy_tx_clk: mii-phy-tx-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+			clock-output-names = "mii_phy_tx";
+		};
+
+		gmac_int_tx_clk: gmac-int-tx-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			clock-output-names = "gmac_int_tx";
+		};
+
+		gmac_tx_clk: clk@800030 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-gmac-clk";
+			reg = <0x00800030 0x4>;
+			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+			clock-output-names = "gmac_tx";
+		};
+
+		cpus_clk: clk@8001410 {
+			compatible = "allwinner,sun9i-a80-cpus-clk";
+			reg = <0x08001410 0x4>;
+			#clock-cells = <0>;
+			clocks = <&osc32k>, <&osc24M>,
+				 <&ccu CLK_PLL_PERIPH0>,
+				 <&ccu CLK_PLL_AUDIO>;
+			clock-output-names = "cpus";
+		};
+
+		ahbs: clk-ahbs {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&cpus_clk>;
+			clock-output-names = "ahbs";
+		};
+
+		apbs: clk@800141c {
+			compatible = "allwinner,sun8i-a23-apb0-clk";
+			reg = <0x0800141c 0x4>;
+			#clock-cells = <0>;
+			clocks = <&ahbs>;
+			clock-output-names = "apbs";
+		};
+
+		apbs_gates: clk@8001428 {
+			compatible = "allwinner,sun9i-a80-apbs-gates-clk";
+			reg = <0x08001428 0x4>;
+			#clock-cells = <1>;
+			clocks = <&apbs>;
+			clock-indices = <0>, <1>,
+					<2>, <3>,
+					<4>, <5>,
+					<6>, <7>,
+					<12>, <13>,
+					<16>, <17>,
+					<18>, <20>;
+			clock-output-names = "apbs_pio", "apbs_ir",
+					"apbs_timer", "apbs_rsb",
+					"apbs_uart", "apbs_1wire",
+					"apbs_i2c0", "apbs_i2c1",
+					"apbs_ps2_0", "apbs_ps2_1",
+					"apbs_dma", "apbs_i2s0",
+					"apbs_i2s1", "apbs_twd";
+		};
+
+		r_1wire_clk: clk@8001450 {
+			reg = <0x08001450 0x4>;
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			clocks = <&osc32k>, <&osc24M>;
+			clock-output-names = "r_1wire";
+		};
+
+		r_ir_clk: clk@8001454 {
+			reg = <0x08001454 0x4>;
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			clocks = <&osc32k>, <&osc24M>;
+			clock-output-names = "r_ir";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun9i-a80-display-engine";
+		allwinner,pipelines = <&fe0>, <&fe1>;
+		status = "disabled";
+	};
+
+	soc@20000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/*
+		 * map 64 bit address range down to 32 bits,
+		 * as the peripherals are all under 512MB.
+		 */
+		ranges = <0 0 0 0x20000000>;
+
+		sram_b: sram@20000 {
+			/* 256 KiB secure SRAM at 0x20000 */
+			compatible = "mmio-sram";
+			reg = <0x00020000 0x40000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x00020000 0x40000>;
+
+			smp-sram@1000 {
+				/*
+				 * This is checked by BROM to determine if
+				 * cpu0 should jump to SMP entry vector
+				 */
+				compatible = "allwinner,sun9i-a80-smp-sram";
+				reg = <0x1000 0x8>;
+			};
+		};
+
+		gmac: ethernet@830000 {
+			compatible = "allwinner,sun7i-a20-gmac";
+			reg = <0x00830000 0x1054>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_BUS_GMAC>, <&gmac_tx_clk>;
+			clock-names = "stmmaceth", "allwinner_gmac_tx";
+			resets = <&ccu RST_BUS_GMAC>;
+			reset-names = "stmmaceth";
+			snps,pbl = <2>;
+			snps,fixed-burst;
+			snps,force_sf_dma_mode;
+			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		ehci0: usb@a00000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a00000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI0>;
+			resets = <&usb_clocks RST_USB0_HCI>;
+			phys = <&usbphy1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@a00400 {
+			compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
+			reg = <0x00a00400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI0>,
+				 <&usb_clocks CLK_USB_OHCI0>;
+			resets = <&usb_clocks RST_USB0_HCI>;
+			phys = <&usbphy1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy1: phy@a00800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a00800 0x4>;
+			clocks = <&usb_clocks CLK_USB0_PHY>;
+			clock-names = "phy";
+			resets = <&usb_clocks RST_USB0_PHY>;
+			reset-names = "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
+		ehci1: usb@a01000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a01000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI1>;
+			resets = <&usb_clocks RST_USB1_HCI>;
+			phys = <&usbphy2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy2: phy@a01800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a01800 0x4>;
+			clocks = <&usb_clocks CLK_USB1_PHY>,
+				 <&usb_clocks CLK_USB_HSIC>,
+				 <&usb_clocks CLK_USB1_HSIC>;
+			clock-names = "phy",
+				      "hsic_12M",
+				      "hsic_480M";
+			resets = <&usb_clocks RST_USB1_PHY>,
+				 <&usb_clocks RST_USB1_HSIC>;
+			reset-names = "phy",
+				      "hsic";
+			status = "disabled";
+			#phy-cells = <0>;
+			/* usb1 is always used with HSIC */
+			phy_type = "hsic";
+		};
+
+		ehci2: usb@a02000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a02000 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI2>;
+			resets = <&usb_clocks RST_USB2_HCI>;
+			phys = <&usbphy3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@a02400 {
+			compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
+			reg = <0x00a02400 0x100>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI2>,
+				 <&usb_clocks CLK_USB_OHCI2>;
+			resets = <&usb_clocks RST_USB2_HCI>;
+			phys = <&usbphy3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy3: phy@a02800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a02800 0x4>;
+			clocks = <&usb_clocks CLK_USB2_PHY>,
+				 <&usb_clocks CLK_USB_HSIC>,
+				 <&usb_clocks CLK_USB2_HSIC>;
+			clock-names = "phy",
+				      "hsic_12M",
+				      "hsic_480M";
+			resets = <&usb_clocks RST_USB2_PHY>,
+				 <&usb_clocks RST_USB2_HSIC>;
+			reset-names = "phy",
+				      "hsic";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
+		usb_clocks: clock@a08000 {
+			compatible = "allwinner,sun9i-a80-usb-clks";
+			reg = <0x00a08000 0x8>;
+			clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
+			clock-names = "bus", "hosc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		cpucfg@1700000 {
+			compatible = "allwinner,sun9i-a80-cpucfg";
+			reg = <0x01700000 0x100>;
+		};
+
+		crypto: crypto@1c02000 {
+			compatible = "allwinner,sun9i-a80-crypto";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_SS>;
+			clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
+			clock-names = "bus", "mod";
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun9i-a80-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&mmc_config_clk 0>, <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun9i-a80-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&mmc_config_clk 1>, <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun9i-a80-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&mmc_config_clk 2>, <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun9i-a80-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&mmc_config_clk 3>, <&ccu CLK_MMC3>,
+				 <&ccu CLK_MMC3_OUTPUT>,
+				 <&ccu CLK_MMC3_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 3>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc_config_clk: clk@1c13000 {
+			compatible = "allwinner,sun9i-a80-mmc-config-clk";
+			reg = <0x01c13000 0x10>;
+			clocks = <&ccu CLK_BUS_MMC>;
+			resets = <&ccu RST_BUS_MMC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clock-output-names = "mmc0_config", "mmc1_config",
+					     "mmc2_config", "mmc3_config";
+		};
+
+		gic: interrupt-controller@1c41000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c41000 0x1000>,
+			      <0x01c42000 0x2000>,
+			      <0x01c44000 0x2000>,
+			      <0x01c46000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		cci: cci@1c90000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x01c90000 0x1000>;
+			ranges = <0x0 0x01c90000 0x10000>;
+
+			cci_control0: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+
+			cci_control1: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+
+			pmu@9000 {
+				 compatible = "arm,cci-400-pmu,r1";
+				 reg = <0x9000 0x5000>;
+				 interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		de_clocks: clock@3000000 {
+			compatible = "allwinner,sun9i-a80-de-clks";
+			reg = <0x03000000 0x30>;
+			clocks = <&ccu CLK_DE>,
+				 <&ccu CLK_SDRAM>,
+				 <&ccu CLK_BUS_DE>;
+			clock-names = "mod",
+				      "dram",
+				      "bus";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		fe0: display-frontend@3100000 {
+			compatible = "allwinner,sun9i-a80-display-frontend";
+			reg = <0x03100000 0x40000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_FE0>, <&de_clocks CLK_FE0>,
+				 <&de_clocks CLK_DRAM_FE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_clocks RST_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					reg = <1>;
+
+					fe0_out_deu0: endpoint {
+						remote-endpoint = <&deu0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		fe1: display-frontend@3140000 {
+			compatible = "allwinner,sun9i-a80-display-frontend";
+			reg = <0x03140000 0x40000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_FE1>, <&de_clocks CLK_FE1>,
+				 <&de_clocks CLK_DRAM_FE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_clocks RST_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe1_out: port@1 {
+					reg = <1>;
+
+					fe1_out_deu1: endpoint {
+						remote-endpoint = <&deu1_in_fe1>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@3200000 {
+			compatible = "allwinner,sun9i-a80-display-backend";
+			reg = <0x03200000 0x40000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_BE0>, <&de_clocks CLK_BE0>,
+				 <&de_clocks CLK_DRAM_BE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_clocks RST_BE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_deu0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&deu0_out_be0>;
+					};
+
+					be0_in_deu1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&deu1_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					reg = <1>;
+
+					be0_out_drc0: endpoint {
+						remote-endpoint = <&drc0_in_be0>;
+					};
+				};
+			};
+		};
+
+		be1: display-backend@3240000 {
+			compatible = "allwinner,sun9i-a80-display-backend";
+			reg = <0x03240000 0x40000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_BE1>, <&de_clocks CLK_BE1>,
+				 <&de_clocks CLK_DRAM_BE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_clocks RST_BE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be1_in_deu0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&deu0_out_be1>;
+					};
+
+					be1_in_deu1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&deu1_out_be1>;
+					};
+				};
+
+				be1_out: port@1 {
+					reg = <1>;
+
+					be1_out_drc1: endpoint {
+						remote-endpoint = <&drc1_in_be1>;
+					};
+				};
+			};
+		};
+
+		deu0: deu@3300000 {
+			compatible = "allwinner,sun9i-a80-deu";
+			reg = <0x03300000 0x40000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_DEU0>,
+				 <&de_clocks CLK_IEP_DEU0>,
+				 <&de_clocks CLK_DRAM_DEU0>;
+			clock-names = "ahb",
+				      "mod",
+				      "ram";
+			resets = <&de_clocks RST_DEU0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				deu0_in: port@0 {
+					reg = <0>;
+
+					deu0_in_fe0: endpoint {
+						remote-endpoint = <&fe0_out_deu0>;
+					};
+				};
+
+				deu0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					deu0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_deu0>;
+					};
+
+					deu0_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_deu0>;
+					};
+				};
+			};
+		};
+
+		deu1: deu@3340000 {
+			compatible = "allwinner,sun9i-a80-deu";
+			reg = <0x03340000 0x40000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_DEU1>,
+				 <&de_clocks CLK_IEP_DEU1>,
+				 <&de_clocks CLK_DRAM_DEU1>;
+			clock-names = "ahb",
+				      "mod",
+				      "ram";
+			resets = <&de_clocks RST_DEU1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				deu1_in: port@0 {
+					reg = <0>;
+
+					deu1_in_fe1: endpoint {
+						remote-endpoint = <&fe1_out_deu1>;
+					};
+				};
+
+				deu1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					deu1_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_deu1>;
+					};
+
+					deu1_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_deu1>;
+					};
+				};
+			};
+		};
+
+		drc0: drc@3400000 {
+			compatible = "allwinner,sun9i-a80-drc";
+			reg = <0x03400000 0x40000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_DRC0>,
+				 <&de_clocks CLK_IEP_DRC0>,
+				 <&de_clocks CLK_DRAM_DRC0>;
+			clock-names = "ahb",
+				      "mod",
+				      "ram";
+			resets = <&de_clocks RST_DRC0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc0_in: port@0 {
+					reg = <0>;
+
+					drc0_in_be0: endpoint {
+						remote-endpoint = <&be0_out_drc0>;
+					};
+				};
+
+				drc0_out: port@1 {
+					reg = <1>;
+
+					drc0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_drc0>;
+					};
+				};
+			};
+		};
+
+		drc1: drc@3440000 {
+			compatible = "allwinner,sun9i-a80-drc";
+			reg = <0x03440000 0x40000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_DRC1>,
+				 <&de_clocks CLK_IEP_DRC1>,
+				 <&de_clocks CLK_DRAM_DRC1>;
+			clock-names = "ahb",
+				      "mod",
+				      "ram";
+			resets = <&de_clocks RST_DRC1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc1_in: port@0 {
+					reg = <0>;
+
+					drc1_in_be1: endpoint {
+						remote-endpoint = <&be1_out_drc1>;
+					};
+				};
+
+				drc1_out: port@1 {
+					reg = <1>;
+
+					drc1_out_tcon1: endpoint {
+						remote-endpoint = <&tcon1_in_drc1>;
+					};
+				};
+			};
+		};
+
+		tcon0: lcd-controller@3c00000 {
+			compatible = "allwinner,sun9i-a80-tcon-lcd";
+			reg = <0x03c00000 0x10000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>;
+			clock-names = "ahb", "tcon-ch0";
+			resets = <&ccu RST_BUS_LCD0>,
+				 <&ccu RST_BUS_EDP>,
+				 <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd",
+				      "edp",
+				      "lvds";
+			clock-output-names = "tcon0-pixel-clock";
+			#clock-cells = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_drc0: endpoint {
+						remote-endpoint = <&drc0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		tcon1: lcd-controller@3c10000 {
+			compatible = "allwinner,sun9i-a80-tcon-tv";
+			reg = <0x03c10000 0x10000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_LCD1>, <&ccu CLK_LCD1>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_LCD1>, <&ccu RST_BUS_EDP>;
+			reset-names = "lcd", "edp";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					reg = <0>;
+
+					tcon1_in_drc1: endpoint {
+						remote-endpoint = <&drc1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		ccu: clock@6000000 {
+			compatible = "allwinner,sun9i-a80-ccu";
+			reg = <0x06000000 0x800>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		timer@6000c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x06000c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@6000ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x06000ca0 0x20>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		pio: pinctrl@6000800 {
+			compatible = "allwinner,sun9i-a80-pinctrl";
+			reg = <0x06000800 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			gmac_rgmii_pins: gmac-rgmii-pins {
+				pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5",
+				       "PA7", "PA8", "PA9", "PA10", "PA12",
+				       "PA13", "PA15", "PA16", "PA17";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pins = "PG10", "PG11";
+				function = "i2c3";
+			};
+
+			lcd0_rgb888_pins: lcd0-rgb888-pins {
+				pins = "PD0", "PD1", "PD2", "PD3",
+				       "PD4", "PD5", "PD6", "PD7",
+				       "PD8", "PD9", "PD10", "PD11",
+				       "PD12", "PD13", "PD14", "PD15",
+				       "PD16", "PD17", "PD18", "PD19",
+				       "PD20", "PD21", "PD22", "PD23",
+				       "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1" ,"PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1" ,"PG2", "PG3",
+						 "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_pins: mmc2-8bit-pins {
+				pins = "PC6", "PC7", "PC8", "PC9",
+				       "PC10", "PC11", "PC12",
+				       "PC13", "PC14", "PC15",
+				       "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			uart0_ph_pins: uart0-ph-pins {
+				pins = "PH12", "PH13";
+				function = "uart0";
+			};
+
+			uart4_pins: uart4-pins {
+				pins = "PG12", "PG13", "PG14", "PG15";
+				function = "uart4";
+			};
+		};
+
+		uart0: serial@7000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@7000400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@7000800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@7000c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@7001000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07001000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@7001400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07001400 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART5>;
+			resets = <&ccu RST_BUS_UART5>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@7002800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07002800 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@7002c00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07002c00 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@7003000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07003000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@7003400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07003400 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4: i2c@7003800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07003800 0x400>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C4>;
+			resets = <&ccu RST_BUS_I2C4>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_wdt: watchdog@8001000 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x08001000 0x20>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		prcm@8001400 {
+			compatible = "allwinner,sun9i-a80-prcm";
+			reg = <0x08001400 0x200>;
+		};
+
+		apbs_rst: reset@80014b0 {
+			reg = <0x080014b0 0x4>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			#reset-cells = <1>;
+		};
+
+		nmi_intc: interrupt-controller@80015a0 {
+			compatible = "allwinner,sun9i-a80-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x080015a0 0xc>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_ir: ir@8002000 {
+			compatible = "allwinner,sun6i-a31-ir";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_ir_pins>;
+			clocks = <&apbs_gates 1>, <&r_ir_clk>;
+			clock-names = "apb", "ir";
+			resets = <&apbs_rst 1>;
+			reg = <0x08002000 0x40>;
+			status = "disabled";
+		};
+
+		r_uart: serial@8002800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x08002800 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apbs_gates 4>;
+			resets = <&apbs_rst 4>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@8002c00 {
+			compatible = "allwinner,sun9i-a80-r-pinctrl";
+			reg = <0x08002c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apbs_gates 0>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			r_ir_pins: r-ir-pins {
+				pins = "PL6";
+				function = "s_cir_rx";
+			};
+
+			r_rsb_pins: r-rsb-pins {
+				pins = "PN0", "PN1";
+				function = "s_rsb";
+				drive-strength = <20>;
+				bias-pull-up;
+			};
+		};
+
+		r_rsb: rsb@8003400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x08003400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apbs_gates 3>;
+			clock-frequency = <3000000>;
+			resets = <&apbs_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts
new file mode 100644
index 000000000000..472ded0aafcf
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2018 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Lichee Pi Nano";
+	compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s";
+
+	aliases {
+		mmc0 = &mmc0;
+		serial0 = &uart0;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pe_pins>;
+	status = "okay";
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Headphone", "HPCOM",
+		"MIC", "Mic";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 4 2 GPIO_ACTIVE_HIGH>; /* PE2 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi b/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi
new file mode 100644
index 000000000000..e4b41bc93852
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi
@@ -0,0 +1,354 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2018 Icenowy Zheng <icenowy@aosc.io>
+ * Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com>
+ */
+
+#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	clocks {
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0x0>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		sram-controller@1c00000 {
+			compatible = "allwinner,suniv-f1c100s-system-control",
+				     "allwinner,sun4i-a10-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_d: sram@10000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0 {
+					compatible = "allwinner,suniv-f1c100s-sram-d",
+						     "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,suniv-f1c100s-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_BUS_SPI0>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,suniv-f1c100s-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_BUS_SPI1>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,suniv-f1c100s-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <23>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,suniv-f1c100s-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <24>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,suniv-f1c100s-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <26>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			compatible = "allwinner,suniv-f1c100s-usb-phy";
+			reg = <0x01c13400 0x10>;
+			reg-names = "phy_ctrl";
+			clocks = <&ccu CLK_USB_PHY0>;
+			clock-names = "usb0_phy";
+			resets = <&ccu RST_USB_PHY0>;
+			reset-names = "usb0_reset";
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,suniv-f1c100s-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <18>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <2>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,suniv-f1c100s-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		intc: interrupt-controller@1c20400 {
+			compatible = "allwinner,suniv-f1c100s-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,suniv-f1c100s-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <38>, <39>, <40>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+			};
+
+			/omit-if-no-ref/
+			i2c0_pd_pins: i2c0-pd-pins {
+				pins = "PD0", "PD12";
+				function = "i2c0";
+			};
+
+			spi0_pc_pins: spi0-pc-pins {
+				pins = "PC0", "PC1", "PC2", "PC3";
+				function = "spi0";
+			};
+
+			uart0_pe_pins: uart0-pe-pins {
+				pins = "PE0", "PE1";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart1_pa_pins: uart1-pa-pins {
+				pins = "PA2", "PA3";
+				function = "uart1";
+			};
+		};
+
+		i2c0: i2c@1c27000 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27000 0x400>;
+			interrupts = <7>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@1c27400 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27400 0x400>;
+			interrupts = <8>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@1c27800 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27800 0x400>;
+			interrupts = <9>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,suniv-f1c100s-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <13>, <14>, <15>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@1c20ca0 {
+			compatible = "allwinner,suniv-f1c100s-wdt",
+				     "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <16>;
+			clocks = <&osc32k>;
+		};
+
+		pwm: pwm@1c21000 {
+			compatible = "allwinner,suniv-f1c100s-pwm",
+				     "allwinner,sun7i-a20-pwm";
+			reg = <0x01c21000 0x400>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		ir: ir@1c22c00 {
+			compatible = "allwinner,suniv-f1c100s-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01c22c00 0x400>;
+			clocks = <&ccu CLK_BUS_IR>, <&ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&ccu RST_BUS_IR>;
+			interrupts = <6>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c23400 {
+			compatible = "allwinner,suniv-f1c100s-lradc",
+				     "allwinner,sun8i-a83t-r-lradc";
+			reg = <0x01c23400 0x400>;
+			interrupts = <22>;
+			status = "disabled";
+		};
+
+		uart0: serial@1c25000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25000 0x400>;
+			interrupts = <1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c25400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c25800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		codec: codec@1c23c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,suniv-f1c100s-codec";
+			reg = <0x01c23c00 0x400>;
+			interrupts = <21>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 12>,
+			       <&dma SUN4I_DMA_NORMAL 12>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_CODEC>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c200s-lctech-pi.dts b/arch/arm/boot/dts/allwinner/suniv-f1c200s-lctech-pi.dts
new file mode 100644
index 000000000000..2d2a3f026df3
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c200s-lctech-pi.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Arm Ltd,
+ * based on work:
+ *   Copyright 2022 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Lctech Pi F1C200s";
+	compatible = "lctech,pi-f1c200s", "allwinner,suniv-f1c200s",
+		     "allwinner,suniv-f1c100s";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pa_pins>;
+	status = "okay";
+};
+
+/*
+ * This is a Type-C socket, but CC1/2 are not connected, and VBUS is connected
+ * to Vin, which supplies the board. Host mode works (if the board is powered
+ * otherwise), but peripheral is probably the intention.
+ */
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c200s-popstick-v1.1.dts b/arch/arm/boot/dts/allwinner/suniv-f1c200s-popstick-v1.1.dts
new file mode 100644
index 000000000000..184c245041a6
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c200s-popstick-v1.1.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Popcorn Computer PopStick v1.1";
+	compatible = "sourceparts,popstick-v1.1", "sourceparts,popstick",
+		     "allwinner,suniv-f1c200s", "allwinner,suniv-f1c100s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 4 6 GPIO_ACTIVE_HIGH>; /* PE6 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pe_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus-v1.2.dtsi
new file mode 100644
index 000000000000..235994a4a2eb
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus-v1.2.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include "sunxi-bananapi-m2-plus.dtsi"
+
+/ {
+	/*
+	 * Bananapi M2+ v1.2 uses a GPIO line to change the effective
+	 * resistance on the CPU regulator's feedback pin.
+	 */
+	reg_vdd_cpux: vdd-cpux {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1108475>;
+		regulator-max-microvolt = <1308475>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
+		gpios-states = <0x1>;
+		states = <1108475 0>, <1308475 1>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus.dtsi
new file mode 100644
index 000000000000..873817ddb4ea
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus.dtsi
@@ -0,0 +1,244 @@
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "bananapi-m2-plus:red:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		switch-4 {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <1500000>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+		host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	/* USB host VBUS is on as long as VCC-IO is on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/allwinner/sunxi-common-regulators.dtsi
index d8e5826fb3de..d8e5826fb3de 100644
--- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-common-regulators.dtsi
diff --git a/arch/arm/boot/dts/allwinner/sunxi-d1s-t113-mangopi-mq-r.dtsi b/arch/arm/boot/dts/allwinner/sunxi-d1s-t113-mangopi-mq-r.dtsi
new file mode 100644
index 000000000000..a415c4a78a70
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-d1s-t113-mangopi-mq-r.dtsi
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2022 Arm Ltd.
+/*
+ * Common peripherals and configurations for MangoPi MQ-R boards.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 3 22 GPIO_ACTIVE_LOW>; /* PD22 */
+		};
+	};
+
+	/* board wide 5V supply directly from the USB-C socket */
+	reg_vcc5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	/* SY8008 DC/DC regulator on the board */
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	/* SY8008 DC/DC regulator on the board, also supplying VDD-SYS */
+	reg_vcc_core: regulator-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-core";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	/* XC6206 LDO on the board */
+	reg_avdd2v8: regulator-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&reg_3v3>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
+	};
+};
+
+&dcxo {
+	clock-frequency = <24000000>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_3v3>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_3v3>;
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_3v3>;
+	vcc-pd-supply = <&reg_3v3>;
+	vcc-pe-supply = <&reg_avdd2v8>;
+	vcc-pf-supply = <&reg_3v3>;
+	vcc-pg-supply = <&reg_3v3>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pb_pins>;
+	status = "okay";
+};
+
+/* The USB-C socket has its CC pins pulled to GND, so is hardwired as a UFP. */
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-h3-h5-emlid-neutis.dtsi b/arch/arm/boot/dts/allwinner/sunxi-h3-h5-emlid-neutis.dtsi
new file mode 100644
index 000000000000..be5f5528a118
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-h3-h5-emlid-neutis.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTSI for Emlid Neutis SoMs.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgii.staroselskii@emlid.com>
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
+		post-power-on-delay-ms = <200>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;   /* PL9 */
+	status = "okay";
+};
+
+
+&de {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>;	/* PL5 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
+		device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"LINEIN", "Line In",
+		"MIC1", "Mic",
+		"MIC2", "Mic",
+		"Mic",  "MBIAS";
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/allwinner/sunxi-h3-h5.dtsi
new file mode 100644
index 000000000000..7df60515a903
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-h3-h5.dtsi
@@ -0,0 +1,979 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-h3-ccu.h>
+#include <dt-bindings/clock/sun8i-r-ccu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/reset/sun8i-h3-ccu.h>
+#include <dt-bindings/reset/sun8i-r-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "mixer0-lcd0-hdmi";
+			clocks = <&display_clocks CLK_MIXER0>,
+				 <&ccu CLK_TCON0>, <&ccu CLK_HDMI>;
+			status = "disabled";
+		};
+
+		framebuffer-tve {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "mixer1-lcd1-tve";
+			clocks = <&display_clocks CLK_MIXER1>,
+				 <&ccu CLK_TVE>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <50000>;
+			clock-output-names = "ext_osc32k";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun8i-h3-display-engine";
+		allwinner,pipelines = <&mixer0>;
+		status = "disabled";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		dma-ranges;
+		ranges;
+
+		display_clocks: clock@1000000 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01000000 0x10000>;
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_DE>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-h3-de2-mixer-0";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER0>,
+				 <&display_clocks CLK_MIXER0>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_MIXER0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					reg = <1>;
+
+					mixer0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-h3-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun8i-h3-tcon-tv",
+				     "allwinner,sun8i-a83t-tcon-tv";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON0>;
+			reset-names = "lcd";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint {
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+					};
+				};
+			};
+		};
+
+		mmc0: mmc@1c0f000 {
+			/* compatible and clocks are in per SoC .dtsi file */
+			reg = <0x01c0f000 0x1000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			/* compatible and clocks are in per SoC .dtsi file */
+			reg = <0x01c10000 0x1000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			/* compatible and clocks are in per SoC .dtsi file */
+			reg = <0x01c11000 0x1000>;
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		sid: eeprom@1c14000 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x1c14000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@34 {
+				reg = <0x34 4>;
+			};
+		};
+
+		msgbox: mailbox@1c17000 {
+			compatible = "allwinner,sun8i-h3-msgbox",
+				     "allwinner,sun6i-a31-msgbox";
+			reg = <0x01c17000 0x1000>;
+			clocks = <&ccu CLK_BUS_MSGBOX>;
+			resets = <&ccu RST_BUS_MSGBOX>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+		};
+
+		usb_otg: usb@1c19000 {
+			compatible = "allwinner,sun8i-h3-musb";
+			reg = <0x01c19000 0x400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			compatible = "allwinner,sun8i-h3-usb-phy";
+			reg = <0x01c19400 0x2c>,
+			      <0x01c1a800 0x4>,
+			      <0x01c1b800 0x4>,
+			      <0x01c1c800 0x4>,
+			      <0x01c1d800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1",
+				    "pmu2",
+				    "pmu3";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>,
+				 <&ccu CLK_USB_PHY3>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy",
+				      "usb3_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>,
+				 <&ccu RST_USB_PHY3>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset",
+				      "usb3_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@1c1a000 {
+			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c1a400 {
+			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1b000 {
+			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+			reg = <0x01c1b000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c1b400 {
+			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+			reg = <0x01c1b400 0x100>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci2: usb@1c1c000 {
+			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
+			resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@1c1c400 {
+			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci3: usb@1c1d000 {
+			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+			reg = <0x01c1d000 0x100>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
+			resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci3: usb@1c1d400 {
+			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+			reg = <0x01c1d400 0x100>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01c20800 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			csi_pins: csi-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10",
+				       "PE11";
+				function = "csi";
+			};
+
+			emac_rgmii_pins: emac-rgmii-pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+				       "PD5", "PD7", "PD8", "PD9", "PD10",
+				       "PD12", "PD13", "PD15", "PD16", "PD17";
+				function = "emac";
+				drive-strength = <40>;
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PA11", "PA12";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PA18", "PA19";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PE12", "PE13";
+				function = "i2c2";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_pins: mmc2-8bit-pins {
+				pins = "PC5", "PC6", "PC8",
+				       "PC9", "PC10", "PC11",
+				       "PC12", "PC13", "PC14",
+				       "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PA17";
+				function = "spdif";
+			};
+
+			spi0_pins: spi0-pins {
+				pins = "PC0", "PC1", "PC2", "PC3";
+				function = "spi0";
+			};
+
+			spi1_pins: spi1-pins {
+				pins = "PA15", "PA16", "PA14", "PA13";
+				function = "spi1";
+			};
+
+			uart0_pa_pins: uart0-pa-pins {
+				pins = "PA4", "PA5";
+				function = "uart0";
+			};
+
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "PA0", "PA1";
+				function = "uart2";
+			};
+
+			uart2_rts_cts_pins: uart2-rts-cts-pins {
+				pins = "PA2", "PA3";
+				function = "uart2";
+			};
+
+			uart3_pins: uart3-pins {
+				pins = "PA13", "PA14";
+				function = "uart3";
+			};
+
+			uart3_rts_cts_pins: uart3-rts-cts-pins {
+				pins = "PA15", "PA16";
+				function = "uart3";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun8i-a23-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun8i-h3-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+			};
+
+			mdio-mux {
+				compatible = "allwinner,sun8i-h3-mdio-mux";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mdio-parent-bus = <&mdio>;
+				/* Only one MDIO is usable at the time */
+				internal_mdio: mdio@1 {
+					compatible = "allwinner,sun8i-h3-mdio-internal";
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					int_mii_phy: ethernet-phy@1 {
+						compatible = "ethernet-phy-ieee802.3-c22";
+						reg = <1>;
+						clocks = <&ccu CLK_BUS_EPHY>;
+						resets = <&ccu RST_BUS_EPHY>;
+					};
+				};
+
+				external_mdio: mdio@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		mbus: dram-controller@1c62000 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01c62000 0x1000>,
+			      <0x01c63000 0x1000>;
+			reg-names = "mbus", "dram";
+			clocks = <&ccu CLK_MBUS>,
+				 <&ccu CLK_DRAM>,
+				 <&ccu CLK_BUS_DRAM>;
+			clock-names = "mbus", "dram", "bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x00000000 0x40000000 0xc0000000>;
+			#interconnect-cells = <1>;
+		};
+
+		spi0: spi@1c68000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c68000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins>;
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c69000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c69000 0x1000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 24>, <&dma 24>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins>;
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		wdt0: watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			resets = <&ccu RST_BUS_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun8i-h3-pwm";
+			reg = <0x01c21400 0x8>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 3>, <&dma 3>;
+			resets = <&ccu RST_BUS_I2S0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 4>, <&dma 4>;
+			resets = <&ccu RST_BUS_I2S1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s2: i2s@1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 27>;
+			resets = <&ccu RST_BUS_I2S2>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-codec";
+			reg = <0x01c22c00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			allwinner,codec-analog-controls = <&codec_analog>;
+			status = "disabled";
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			dmas = <&dma 9>, <&dma 9>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		csi: camera@1cb0000 {
+			compatible = "allwinner,sun8i-h3-csi";
+			reg = <0x01cb0000 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&csi_pins>;
+			status = "disabled";
+		};
+
+		hdmi: hdmi@1ee0000 {
+			compatible = "allwinner,sun8i-h3-dw-hdmi",
+				     "allwinner,sun8i-a83t-dw-hdmi";
+			reg = <0x01ee0000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
+			clock-names = "iahb", "isfr", "tmds", "cec";
+			resets = <&ccu RST_BUS_HDMI1>;
+			reset-names = "ctrl";
+			phys = <&hdmi_phy>;
+			phy-names = "phy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint {
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@1ef0000 {
+			compatible = "allwinner,sun8i-h3-hdmi-phy";
+			reg = <0x01ef0000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_PLL_VIDEO>;
+			clock-names = "bus", "mod", "pll-0";
+			resets = <&ccu RST_BUS_HDMI0>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+
+		rtc: rtc@1f00000 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01f00000 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out", "iosc";
+			clocks = <&osc32k>;
+			#clock-cells = <1>;
+		};
+
+		r_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun8i-h3-r-intc",
+				     "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x01f00c00 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_ccu: clock@1f01400 {
+			compatible = "allwinner,sun8i-h3-r-ccu";
+			reg = <0x01f01400 0x100>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
+				 <&ccu CLK_PLL_PERIPH0>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		codec_analog: codec-analog@1f015c0 {
+			compatible = "allwinner,sun8i-h3-codec-analog";
+			reg = <0x01f015c0 0x4>;
+		};
+
+		ir: ir@1f02000 {
+			compatible = "allwinner,sun6i-a31-ir";
+			clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&r_ccu RST_APB0_IR>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01f02000 0x400>;
+			status = "disabled";
+		};
+
+		r_i2c: i2c@1f02400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01f02400 0x400>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c_pins>;
+			clocks = <&r_ccu CLK_APB0_I2C>;
+			resets = <&r_ccu RST_APB0_I2C>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_uart: serial@1f02800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01f02800 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&r_ccu CLK_APB0_UART>;
+			resets = <&r_ccu RST_APB0_UART>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_uart_pins>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@1f02c00 {
+			compatible = "allwinner,sun8i-h3-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_ir_rx_pin: r-ir-rx-pin {
+				pins = "PL11";
+				function = "s_cir_rx";
+			};
+
+			r_i2c_pins: r-i2c-pins {
+				pins = "PL0", "PL1";
+				function = "s_i2c";
+			};
+
+			r_pwm_pin: r-pwm-pin {
+				pins = "PL10";
+				function = "s_pwm";
+			};
+
+			r_uart_pins: r-uart-pins {
+				pins = "PL2", "PL3";
+				function = "s_uart";
+			};
+		};
+
+		r_pwm: pwm@1f03800 {
+			compatible = "allwinner,sun8i-h3-pwm";
+			reg = <0x01f03800 0x8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_pwm_pin>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi b/arch/arm/boot/dts/allwinner/sunxi-itead-core-common.dtsi
index 2565d5137a17..0d002f83a259 100644
--- a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-itead-core-common.dtsi
@@ -65,8 +65,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -75,8 +73,6 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
@@ -125,7 +121,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-cc.dtsi
new file mode 100644
index 000000000000..89731bb34c6b
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-cc.dtsi
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "librecomputer:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		status_led {
+			label = "librecomputer:blue:status";
+			gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+			wakeup-source;
+		};
+	};
+
+	reg_vcc1v2: vcc1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-active-high;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	/* This represents the board's 5V input */
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		enable-active-high;
+	};
+
+	reg_vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc3v3>;
+		gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+	};
+
+	reg_vdd_cpux: vdd-cpux {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpux";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-active-high;
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc_io>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc_io>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	/* VBUS on USB ports are always on */
+	usb0_vbus-supply = <&reg_vcc5v0>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	usb2_vbus-supply = <&reg_vcc5v0>;
+	usb3_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-it.dtsi b/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-it.dtsi
new file mode 100644
index 000000000000..50d328c2a84d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-it.dtsi
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Chen-Yu Tsai <wens@csie.org>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status_led {
+			label = "librecomputer:blue:status";
+			gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		};
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	/* This represents the board's 5V input */
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		enable-active-high;
+	};
+
+	reg_vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-io";
+		/* This is simply a MOSFET switch */
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc3v3>;
+		gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+	};
+
+	reg_vcc_usbwifi: vcc-usbwifi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-usbwifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&pio 6 4 GPIO_ACTIVE_HIGH>; /* PG4 */
+		enable-active-high;
+	};
+
+	reg_vdd_cpux: vdd-cpux {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpux";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc_io>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&pio {
+	vcc-pa-supply = <&reg_vcc_io>;
+	vcc-pc-supply = <&reg_vcc_io>;
+	vcc-pd-supply = <&reg_vcc_io>;
+	vcc-pe-supply = <&reg_vcc_io>;
+	vcc-pf-supply = <&reg_vcc_io>;
+	vcc-pg-supply = <&reg_vcc_io>;
+};
+
+&r_pio {
+	vcc-pl-supply = <&reg_vcc3v3>;
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc_usbwifi>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi b/arch/arm/boot/dts/allwinner/sunxi-reference-design-tablet.dtsi
index 245d0bcde441..117198c52e1f 100644
--- a/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-reference-design-tablet.dtsi
@@ -46,13 +46,13 @@
 
 &i2c0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
+	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 };
 
 &i2c1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 };
 
@@ -60,14 +60,14 @@
 	vref-supply = <&reg_vcc3v0>;
 	status = "okay";
 
-	button@200 {
+	button-200 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <200000>;
 	};
 
-	button@400 {
+	button-400 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
@@ -77,6 +77,6 @@
 
 &pwm {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-0 = <&pwm0_pin>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/alphascale/Makefile b/arch/arm/boot/dts/alphascale/Makefile
new file mode 100644
index 000000000000..8d1314fc79d0
--- /dev/null
+++ b/arch/arm/boot/dts/alphascale/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MACH_ASM9260) += \
+	alphascale-asm9260-devkit.dtb
+dtb-$(CONFIG_MACH_ASM9260) += \
+	alphascale-asm9260-devkit.dtb
diff --git a/arch/arm/boot/dts/alphascale-asm9260-devkit.dts b/arch/arm/boot/dts/alphascale/alphascale-asm9260-devkit.dts
index c77e2c902fb6..c77e2c902fb6 100644
--- a/arch/arm/boot/dts/alphascale-asm9260-devkit.dts
+++ b/arch/arm/boot/dts/alphascale/alphascale-asm9260-devkit.dts
diff --git a/arch/arm/boot/dts/alphascale-asm9260.dtsi b/arch/arm/boot/dts/alphascale/alphascale-asm9260.dtsi
index 907fc7bfc418..2ce6038536fd 100644
--- a/arch/arm/boot/dts/alphascale-asm9260.dtsi
+++ b/arch/arm/boot/dts/alphascale/alphascale-asm9260.dtsi
@@ -4,10 +4,11 @@
  * Licensed under the X11 license or the GPL v2 (or later)
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/alphascale,asm9260.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	interrupt-parent = <&icoll>;
 
 	memory {
diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
deleted file mode 100644
index 75de1e723303..000000000000
--- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/dts-v1/;
-
-#include "am335x-baltos.dtsi"
-#include "am335x-baltos-leds.dtsi"
-
-/ {
-	model = "OnRISC Baltos iR 2110";
-};
-
-&am33xx_pinmux {
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)      /* uart1_rxd */
-			AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0)      /* uart1_txd */
-			AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* uart1_ctsn */
-			AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)      /* uart1_rtsn */
-			AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
-			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
-			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
-			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
-		>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&davinci_mdio {
-	phy0: ethernet-phy@0 {
-		reg = <1>;
-	};
-};
-
-&cpsw_emac0 {
-	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
-	phy-handle = <&phy0>;
-};
-
-&cpsw_emac1 {
-	phy-mode = "rgmii-txid";
-	dual_emac_res_vlan = <2>;
-	phy-handle = <&phy1>;
-};
-
-&phy_sel {
-	rmii-clock-ext = <1>;
-};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
deleted file mode 100644
index 46df1b22022c..000000000000
--- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/dts-v1/;
-
-#include "am335x-baltos.dtsi"
-#include "am335x-baltos-leds.dtsi"
-
-/ {
-	model = "OnRISC Baltos iR 3220";
-};
-
-&am33xx_pinmux {
-	tca6416_pins: pinmux_tca6416_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)      /* uart1_rxd */
-			AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0)      /* uart1_txd */
-			AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* uart1_ctsn */
-			AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)      /* uart1_rtsn */
-			AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
-			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
-			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
-			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
-			AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
-			AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE2)      /* i2c0_sda.uart2_ctsn_mux0 */
-			AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)      /* i2c0_scl.uart2_rtsn_mux0 */
-			AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
-			AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
-			AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
-			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
-
-			AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
-		>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&i2c1 {
-	tca6416: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <20 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tca6416_pins>;
-	};
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cpsw_emac0 {
-	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
-	fixed-link {
-		speed = <100>;
-		full-duplex;
-	};
-};
-
-&cpsw_emac1 {
-	phy-mode = "rgmii-txid";
-	dual_emac_res_vlan = <2>;
-	phy-handle = <&phy1>;
-};
-
-&phy_sel {
-	rmii-clock-ext = <1>;
-};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
deleted file mode 100644
index 5d56355ba040..000000000000
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/dts-v1/;
-
-#include "am335x-baltos.dtsi"
-#include "am335x-baltos-leds.dtsi"
-
-/ {
-	model = "OnRISC Baltos iR 5221";
-};
-
-&am33xx_pinmux {
-	tca6416_pins: pinmux_tca6416_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
-		>;
-	};
-
-
-	dcan1_pins: pinmux_dcan1_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2)      /* uart0_ctsn.dcan1_tx_mux0 */
-			AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE2)      /* uart0_rtsn.dcan1_rx_mux0 */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)      /* uart1_rxd */
-			AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0)      /* uart1_txd */
-			AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* uart1_ctsn */
-			AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)      /* uart1_rtsn */
-			AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
-			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
-			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
-			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
-			AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
-			AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE2)      /* i2c0_sda.uart2_ctsn_mux0 */
-			AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)      /* i2c0_scl.uart2_rtsn_mux0 */
-			AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
-			AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
-			AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
-			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
-
-			AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
-		>;
-	};
-
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&i2c1 {
-	tca6416: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <20 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tca6416_pins>;
-	};
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cpsw_emac0 {
-	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
-	fixed-link {
-		speed = <100>;
-		full-duplex;
-	};
-};
-
-&cpsw_emac1 {
-	phy-mode = "rgmii-txid";
-	dual_emac_res_vlan = <2>;
-	phy-handle = <&phy1>;
-};
-
-&phy_sel {
-	rmii-clock-ext = <1>;
-};
-
-&dcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan1_pins>;
-
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/am335x-baltos-leds.dtsi b/arch/arm/boot/dts/am335x-baltos-leds.dtsi
deleted file mode 100644
index 3ab1767d5c13..000000000000
--- a/arch/arm/boot/dts/am335x-baltos-leds.dtsi
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/*#include "am33xx.dtsi"*/
-
-/ {
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds>;
-
-		compatible = "gpio-leds";
-
-		power {
-			label = "onrisc:red:power";
-			linux,default-trigger = "default-on";
-			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-		wlan {
-			label = "onrisc:blue:wlan";
-			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		app {
-			label = "onrisc:green:app";
-			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-};
-
-&am33xx_pinmux {
-	user_leds: pinmux_user_leds {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* mii1_col.gpio3_0 PWR LED */
-			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* mii1_txd3.gpio0_16 WLAN LED */
-			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* mii1_txd2.gpio0_17 APP LED */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
deleted file mode 100644
index ec6052c521ef..000000000000
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ /dev/null
@@ -1,417 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-#include "am33xx.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "vscom,onrisc", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	vbat: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	wl12xx_vmmc: fixedregulator2 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 8 0>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-};
-
-&am33xx_pinmux {
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad8.mmc1_dat0_mux0 */
-			AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad9.mmc1_dat1_mux0 */
-			AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad10.mmc1_dat2_mux0 */
-			AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad11.mmc1_dat3_mux0 */
-			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_csn1.mmc1_clk_mux0 */
-			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_csn2.mmc1_cmd_mux0 */
-			AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLUP | MUX_MODE7)      /* emu0.gpio3[7] */
-		>;
-	};
-
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9e8, PIN_OUTPUT_PULLUP | MUX_MODE7)      /* emu1.gpio3[8] */
-		>;
-	};
-
-	tps65910_pins: pinmux_tps65910_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE7)      /* gpmc_ben1.gpio1[28] */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE2)      /* spi0_d1.i2c1_sda_mux3 */
-			AM33XX_IOPAD(0x95c, PIN_INPUT | MUX_MODE2)      /* spi0_cs0.i2c1_scl_mux3 */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)       /* mii1_crs.rmii1_crs_dv */
-			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_tx_en.rmii1_txen */
-			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_txd1.rmii1_txd1 */
-			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_txd0.rmii1_txd0 */
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1)      /* mii1_rxd1.rmii1_rxd1 */
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1)      /* mii1_rxd0.rmii1_rxd0 */
-			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* rmii1_ref_clk.rmii1_refclk */
-
-
-			/* Slave 2 */
-			AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
-			AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
-			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
-
-			/* Slave 2 reset value*/
-			AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	nandflash_pins_s0: nandflash_pins_s0 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-		>;
-	};
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins_s0>;
-	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
-	status = "okay";
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-		nand-bus-width = <8>;
-		ti,nand-ecc-opt = "bch8";
-		ti,nand-xfer-type = "polled";
-
-		gpmc,device-nand = "true";
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ti,elm-id = <&elm>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <28 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tps65910_pins>;
-	};
-
-	at24@50 {
-		compatible = "atmel,24c02";
-		pagesize = <8>;
-		reg = <0x50>;
-	};
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-#include "tps65910.dtsi"
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	ti,en-ck32k-xtal = <1>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	dual_emac = <1>;
-
-	status = "okay";
-};
-
-&davinci_mdio {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-
-	phy1: ethernet-phy@1 {
-		reg = <7>;
-		eee-broken-100tx;
-		eee-broken-1000t;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc_reg>;
-	status = "okay";
-};
-
-&mmc2 {
-	status = "okay";
-	vmmc-supply = <&wl12xx_vmmc>;
-	ti,non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1835";
-		reg = <2>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
-
-&gpio0 {
-	ti,no-reset-on-init;
-};
-
-&gpio3 {
-	ti,no-reset-on-init;
-};
diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts
deleted file mode 100644
index 29782be07605..000000000000
--- a/arch/arm/boot/dts/am335x-base0033.dts
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION
- *
- * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "am335x-igep0033.dtsi"
-
-/ {
-	model = "IGEP COM AM335x on AQUILA Expansion";
-	compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx";
-
-	hdmi {
-		compatible = "ti,tilcdc,slave";
-		i2c = <&i2c0>;
-		pinctrl-names = "default", "off";
-		pinctrl-0 = <&nxp_hdmi_pins>;
-		pinctrl-1 = <&nxp_hdmi_off_pins>;
-		status = "okay";
-	};
-
-	leds_base {
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_base_pins>;
-
-		compatible = "gpio-leds";
-
-		led0 {
-			label = "base:red:user";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;	/* gpio1_21 */
-			default-state = "off";
-		};
-
-		led1 {
-			label = "base:green:user";
-			gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;	/* gpio2_0 */
-			default-state = "off";
-		};
-	};
-};
-
-&am33xx_pinmux {
-	nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
-			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data0 */
-			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data1 */
-			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data2 */
-			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)	/* lcd_data3 */
-			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data4 */
-			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data5 */
-			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data6 */
-			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data7 */
-			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data8 */
-			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data9 */
-			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data10 */
-			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data11 */
-			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data12 */
-			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data13 */
-			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data14 */
-			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data15 */
-			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync */
-			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync */
-			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk */
-			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en */
-		>;
-	};
-	nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
-		>;
-	};
-
-	leds_base_pins: pinmux_leds_base_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			AM33XX_IOPAD(0x888, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.gpio2_0 */
-		>;
-	};
-};
-
-&lcdc {
-	status = "okay";
-};
-
-&i2c0 {
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
deleted file mode 100644
index 1d154444dfef..000000000000
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ /dev/null
@@ -1,417 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/ {
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
-
-		compatible = "gpio-leds";
-
-		led2 {
-			label = "beaglebone:green:heartbeat";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led3 {
-			label = "beaglebone:green:mmc0";
-			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led4 {
-			label = "beaglebone:green:usr2";
-			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "cpu0";
-			default-state = "off";
-		};
-
-		led5 {
-			label = "beaglebone:green:usr3";
-			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc1";
-			default-state = "off";
-		};
-	};
-
-	vmmcsd_fixed: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&clkout2_pin>;
-
-	user_leds_s0: user_leds_s0 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
-			AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
-			AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	clkout2_pin: pinmux_clkout2_pin {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
-			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
-			AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
-			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
-			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
-			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
-			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
-			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
-			AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
-			AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
-			AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
-		>;
-	};
-
-	emmc_pins: pinmux_emmc_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
-			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
-			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
-			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "peripheral";
-	interrupts-extended = <&intc 18 &tps 0>;
-	interrupt-names = "mc", "vbus";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-
-	baseboard_eeprom: baseboard_eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		baseboard_data: baseboard_data@0 {
-			reg = <0 0x100>;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	status = "okay";
-	clock-frequency = <100000>;
-
-	cape_eeprom0: cape_eeprom0@54 {
-		compatible = "atmel,24c256";
-		reg = <0x54>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		cape0_data: cape_data@0 {
-			reg = <0 0x100>;
-		};
-	};
-
-	cape_eeprom1: cape_eeprom1@55 {
-		compatible = "atmel,24c256";
-		reg = <0x55>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		cape1_data: cape_data@0 {
-			reg = <0 0x100>;
-		};
-	};
-
-	cape_eeprom2: cape_eeprom2@56 {
-		compatible = "atmel,24c256";
-		reg = <0x56>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		cape2_data: cape_data@0 {
-			reg = <0 0x100>;
-		};
-	};
-
-	cape_eeprom3: cape_eeprom3@57 {
-		compatible = "atmel,24c256";
-		reg = <0x57>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		cape3_data: cape_data@0 {
-			reg = <0 0x100>;
-		};
-	};
-};
-
-
-/include/ "tps65217.dtsi"
-
-&tps {
-	/*
-	 * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
-	 * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
-	 * mode and risk hardware damage if this mode is entered.
-	 *
-	 * For details, see linux-omap mailing list May 2015 thread
-	 *	[PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
-	 * In particular, messages:
-	 *	http://www.spinics.net/lists/linux-omap/msg118585.html
-	 *	http://www.spinics.net/lists/linux-omap/msg118615.html
-	 *
-	 * You can override this later with
-	 *	&tps {  /delete-property/ ti,pmic-shutdown-controller;  }
-	 * if you want to use RTC-only mode and made sure you are not affected
-	 * by the hardware problems. (Tip: double-check by performing a current
-	 * measurement after shutdown: it should be less than 1 mA.)
-	 */
-
-	interrupts = <7>; /* NMI */
-	interrupt-parent = <&intc>;
-
-	ti,pmic-shutdown-controller;
-
-	charger {
-		interrupts = <0>, <1>;
-		interrupt-names = "USB", "AC";
-		status = "okay";
-	};
-
-	pwrbutton {
-		interrupts = <2>;
-		status = "okay";
-	};
-
-	regulators {
-		dcdc1_reg: regulator@0 {
-			regulator-name = "vdds_dpr";
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1351500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			regulator-name = "vio,vrtc,vdds";
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			regulator-name = "vdd_3v3aux";
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			regulator-name = "vdd_1v8";
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			regulator-name = "vdd_3v3a";
-			regulator-always-on;
-		};
-	};
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "mii";
-};
-
-&mac {
-	slaves = <1>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&mmc1 {
-	status = "okay";
-	bus-width = <0x4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
-
-&aes {
-	status = "okay";
-};
-
-&sham {
-	status = "okay";
-};
-
-&rtc {
-	clocks = <&clk_32768_ck>, <&clkdiv32k_ick>;
-	clock-names = "ext-clk", "int-clk";
-};
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
deleted file mode 100644
index 6b8493720424..000000000000
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-bone-common.dtsi"
-
-/ {
-	model = "TI AM335x BeagleBone";
-	compatible = "ti,am335x-bone", "ti,am33xx";
-};
-
-&ldo3_reg {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-always-on;
-};
-
-&mmc1 {
-	vmmc-supply = <&ldo3_reg>;
-};
diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
deleted file mode 100644
index 325daae40278..000000000000
--- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/display/tda998x.h>
-
-&ldo3_reg {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-always-on;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmcsd_fixed>;
-};
-
-&mmc2 {
-	vmmc-supply = <&vmmcsd_fixed>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_pins>;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&am33xx_pinmux {
-	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr0 */
-			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */
-			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */
-			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */
-			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */
-			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */
-			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */
-			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */
-			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */
-			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */
-			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */
-			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */
-			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */
-			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */
-			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */
-			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */
-			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */
-			AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
-			AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
-			AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
-			AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
-		>;
-	};
-
-	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr0 */
-		>;
-	};
-
-	mcasp0_pins: mcasp0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
-			AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
-			AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
-			AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
-			AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */
-		>;
-	};
-};
-
-&lcdc {
-	status = "okay";
-
-	/* If you want to get 24 bit RGB and 16 BGR mode instead of
-	 * current 16 bit RGB and 24 BGR modes, set the propety
-	 * below to "crossed" and uncomment the video-ports -property
-	 * in tda19988 node.
-	 */
-	blue-and-red-wiring = "straight";
-
-	port {
-		lcdc_0: endpoint@0 {
-			remote-endpoint = <&hdmi_0>;
-		};
-	};
-};
-
-&i2c0 {
-	tda19988: tda19988 {
-		compatible = "nxp,tda998x";
-		reg = <0x70>;
-
-		pinctrl-names = "default", "off";
-		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
-		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
-
-		/* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
-		/* video-ports = <0x234501>; */
-
-		#sound-dai-cells = <0>;
-		audio-ports = <	TDA998x_I2S	0x03>;
-
-		ports {
-			port@0 {
-				hdmi_0: endpoint@0 {
-					remote-endpoint = <&lcdc_0>;
-				};
-			};
-		};
-	};
-};
-
-&rtc {
-	system-power-controller;
-};
-
-&mcasp0	{
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcasp0_pins>;
-	status = "okay";
-	op-mode = <0>;	/* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 1 0
-		>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
-/ {
-	clk_mcasp0_fixed: clk_mcasp0_fixed {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24576000>;
-	};
-
-	clk_mcasp0: clk_mcasp0 {
-		#clock-cells = <0>;
-		compatible = "gpio-gate-clock";
-		clocks = <&clk_mcasp0_fixed>;
-		enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "TI BeagleBone Black";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink0_master>;
-		simple-audio-card,frame-master = <&dailink0_master>;
-
-		dailink0_master: simple-audio-card,cpu {
-			sound-dai = <&mcasp0>;
-			clocks = <&clk_mcasp0>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&tda19988>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
deleted file mode 100644
index 83f49f616b19..000000000000
--- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-bone-common.dtsi"
-#include "am335x-boneblack-common.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "TI AM335x BeagleBone Black Wireless";
-	compatible = "ti,am335x-bone-black-wireless", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
-
-	wlan_en_reg: fixedregulator@2 {
-		compatible = "regulator-fixed";
-		regulator-name = "wlan-en-regulator";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		startup-delay-us= <70000>;
-
-		/* WL_EN */
-		gpio = <&gpio3 9 0>;
-		enable-active-high;
-	};
-};
-
-&am33xx_pinmux {
-	bt_pins: pinmux_bt_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gmii1_txd0.gpio0_28 - BT_EN */
-		>;
-	};
-
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE6 ) /* (L15) gmii1_rxd1.mmc2_clk */
-			AM33XX_IOPAD(0x914, PIN_INPUT_PULLUP | MUX_MODE6 ) /* (J16) gmii1_txen.mmc2_cmd */
-			AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (J17) gmii1_rxdv.mmc2_dat0 */
-			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (J18) gmii1_txd3.mmc2_dat1 */
-			AM33XX_IOPAD(0x920, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (K15) gmii1_txd2.mmc2_dat2 */
-			AM33XX_IOPAD(0x908, PIN_INPUT_PULLUP | MUX_MODE5 ) /* (H16) gmii1_col.mmc2_dat3 */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1)	/* gmii1_rxd3.uart3_rxd */
-			AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* gmii1_rxd2.uart3_txd */
-			AM33XX_IOPAD(0x948, PIN_INPUT | MUX_MODE3)		/* mdio_data.uart3_ctsn */
-			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* mdio_clk.uart3_rtsn */
-		>;
-	};
-
-	wl18xx_pins: pinmux_wl18xx_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gmii1_txclk.gpio3_9 WL_EN */
-			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_refclk.gpio0_29 WL_IRQ */
-			AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gmii1_rxclk.gpio3_10 LS_BUF_EN */
-		>;
-	};
-};
-
-&mac {
-	status = "disabled";
-};
-
-&mmc3 {
-	dmas = <&edma_xbar 12 0 1
-		&edma_xbar 13 0 2>;
-	dma-names = "tx", "rx";
-	status = "okay";
-	vmmc-supply = <&wlan_en_reg>;
-	bus-width = <4>;
-	non-removable;
-	cap-power-off-card;
-	ti,needs-special-hs-handling;
-	keep-power-in-suspend;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1835";
-		reg = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <29 IRQ_TYPE_EDGE_RISING>;
-	};
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins &bt_pins>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "ti,wl1835-st";
-		enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&gpio3 {
-	ls_buf_en {
-		gpio-hog;
-		gpios = <10 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "LS_BUF_EN";
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
deleted file mode 100644
index d154d3133c16..000000000000
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-bone-common.dtsi"
-#include "am335x-boneblack-common.dtsi"
-
-/ {
-	model = "TI AM335x BeagleBone Black";
-	compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
-};
-
-&cpu0_opp_table {
-	/*
-	 * All PG 2.0 silicon may not support 1GHz but some of the early
-	 * BeagleBone Blacks have PG 2.0 silicon which is guaranteed
-	 * to support 1GHz OPP so enable it for PG 2.0 on this board.
-	 */
-	oppnitro-1000000000 {
-		opp-supported-hw = <0x06 0x0100>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
deleted file mode 100644
index cdc1b2be792f..000000000000
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ /dev/null
@@ -1,460 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "TI AM335x BeagleBone Blue";
-	compatible = "ti,am335x-bone-blue", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
-
-		compatible = "gpio-leds";
-
-		usr_0_led {
-			label = "beaglebone:green:usr0";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		usr_1_led {
-			label = "beaglebone:green:usr1";
-			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		usr_2_led {
-			label = "beaglebone:green:usr2";
-			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "cpu0";
-			default-state = "off";
-		};
-
-		usr_3_led {
-			label = "beaglebone:green:usr3";
-			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc1";
-			default-state = "off";
-		};
-
-		wifi_led {
-			label = "wifi";
-			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "phy0assoc";
-		};
-
-		red_led {
-			label = "red";
-			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		green_led {
-			label = "green";
-			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		batt_1_led {
-			label = "bat25";
-			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		batt_2_led {
-			label = "bat50";
-			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		batt_3_led {
-			label = "bat75";
-			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		batt_4_led {
-			label = "bat100";
-			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	vmmcsd_fixed: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	wlan_en_reg: fixedregulator@2 {
-		compatible = "regulator-fixed";
-		regulator-name = "wlan-en-regulator";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		startup-delay-us= <70000>;
-
-		/* WL_EN */
-		gpio = <&gpio3 9 0>;
-		enable-active-high;
-	};
-};
-
-&am33xx_pinmux {
-	user_leds_s0: user_leds_s0 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
-			AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
-			AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */
-			AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */
-			AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] - WIFI_LED */
-			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE7) /* (R7) gpmc_advn_ale.gpio2[2] - P8.7, LED_RED, GP1_PIN_5 */
-			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE7) /* (T7) gpmc_oen_ren.gpio2[3] - P8.8, LED_GREEN, GP1_PIN_6 */
-			AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE7) /* (U12) gpmc_ad11.gpio0[27] - P8.17, BATT_LED_1 */
-			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7) /* (T5) lcd_data15.gpio0[11] - P8.32, BATT_LED_2 */
-			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE7) /* (V6) gpmc_csn0.gpio1[29] - P8.26, BATT_LED_3 */
-			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) /* (T11) gpmc_ad10.gpio0[26] - P8.14, BATT_LED_4 */
-
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* (C17) I2C0_SDA.I2C0_SDA */
-			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* (C16) I2C0_SCL.I2C0_SCL */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3)	/* (D18) uart1_ctsn.I2C2_SDA */
-			AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3)	/* (D17) uart1_rtsn.I2C2_SCL */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* (E15) uart0_rxd.uart0_rxd */
-			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* (E16) uart0_txd.uart0_txd */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)		/* (C15) spi0_cs1.gpio0[6] */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2)	/* (U9) gpmc_csn1.mmc1_clk */
-			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)	/* (V9) gpmc_csn2.mmc1_cmd */
-			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)	/* (U7) gpmc_ad0.mmc1_dat0 */
-			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)	/* (V7) gpmc_ad1.mmc1_dat1 */
-			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)	/* (R8) gpmc_ad2.mmc1_dat2 */
-			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)	/* (T8) gpmc_ad3.mmc1_dat3 */
-			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)	/* (U8) gpmc_ad4.mmc1_dat4 */
-			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1)	/* (V8) gpmc_ad5.mmc1_dat5 */
-			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)	/* (R9) gpmc_ad6.mmc1_dat6 */
-			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)	/* (T9) gpmc_ad7.mmc1_dat7 */
-		>;
-	};
-
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE6)	/* (L15) gmii1_rxd1.mmc2_clk */
-			AM33XX_IOPAD(0x914, PIN_INPUT_PULLUP | MUX_MODE6)	/* (J16) gmii1_txen.mmc2_cmd */
-			AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE5)	/* (J17) gmii1_rxdv.mmc2_dat0 */
-			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLUP | MUX_MODE5)	/* (J18) gmii1_txd3.mmc2_dat1 */
-			AM33XX_IOPAD(0x920, PIN_INPUT_PULLUP | MUX_MODE5)	/* (K15) gmii1_txd2.mmc2_dat2 */
-			AM33XX_IOPAD(0x908, PIN_INPUT_PULLUP | MUX_MODE5)	/* (H16) gmii1_col.mmc2_dat3 */
-		>;
-	};
-
-	bt_pins: pinmux_bt_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* (K17) gmii1_txd0.gpio0[28] - BT_EN */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1)	/* (L17) gmii1_rxd3.uart3_rxd */
-			AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* (L16) gmii1_rxd2.uart3_txd */
-			AM33XX_IOPAD(0x948, PIN_INPUT | MUX_MODE3)		/* (M17) mdio_data.uart3_ctsn */
-			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* (M18) mdio_clk.uart3_rtsn */
-		>;
-	};
-
-	wl18xx_pins: pinmux_wl18xx_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* (K18) gmii1_txclk.gpio3[9] - WL_EN */
-			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* (H18) rmii1_refclk.gpio0[29] - WL_IRQ */
-			AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "peripheral";
-	interrupts-extended = <&intc 18 &tps 0>;
-	interrupt-names = "mc", "vbus";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-
-	baseboard_eeprom: baseboard_eeprom@50 {
-		compatible = "at,24c256";
-		reg = <0x50>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		baseboard_data: baseboard_data@0 {
-			reg = <0 0x100>;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	mpu9250@68 {
-		compatible = "invensense,mpu9250";
-		reg = <0x68>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <21 GPIO_ACTIVE_LOW>;
-		i2c-gate {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ax8975@c {
-				compatible = "ak,ak8975";
-				reg = <0x0c>;
-			};
-		};
-	};
-
-	pressure@76 {
-		compatible = "bosch,bmp280";
-		reg = <0x76>;
-	};
-};
-
-/include/ "tps65217.dtsi"
-
-&tps {
-	interrupts = <7>; /* NMI */
-	interrupt-parent = <&intc>;
-
-	charger {
-		interrupts = <0>, <1>;
-		interrupt-names = "USB", "AC";
-		status = "okay";
-	};
-
-	pwrbutton {
-		interrupts = <2>;
-		status = "okay";
-	};
-
-	regulators {
-		dcdc1_reg: regulator@0 {
-			regulator-name = "vdds_dpr";
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1351500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			regulator-name = "vio,vrtc,vdds";
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			regulator-name = "vdd_3v3aux";
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			regulator-name = "vdd_1v8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			regulator-name = "vdd_3v3a";
-			regulator-always-on;
-		};
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
-
-&mmc2 {
-	status = "okay";
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <8>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-};
-
-&mmc3 {
-	dmas = <&edma_xbar 12 0 1
-		&edma_xbar 13 0 2>;
-	dma-names = "tx", "rx";
-	status = "okay";
-	vmmc-supply = <&wlan_en_reg>;
-	bus-width = <4>;
-	non-removable;
-	cap-power-off-card;
-	ti,needs-special-hs-handling;
-	keep-power-in-suspend;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1835";
-		reg = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <29 IRQ_TYPE_EDGE_RISING>;
-	};
-};
-
-&tscadc {
-	status = "okay";
-	adc {
-		ti,adc-channels = <0 1 2 3 4 5 6 7>;
-	};
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins &bt_pins>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "ti,wl1835-st";
-		enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&aes {
-	status = "okay";
-};
-
-&sham {
-	status = "okay";
-};
-
-&rtc {
-	system-power-controller;
-	clocks = <&clk_32768_ck>, <&clkdiv32k_ick>;
-	clock-names = "ext-clk", "int-clk";
-};
-
-&gpio3 {
-	ls_buf_en {
-		gpio-hog;
-		gpios = <10 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "LS_BUF_EN";
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi
deleted file mode 100644
index 853e6d3a028d..000000000000
--- a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-&ldo3_reg {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-always-on;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmcsd_fixed>;
-};
-
-&mmc2 {
-	vmmc-supply = <&vmmcsd_fixed>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_pins>;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&am33xx_pinmux {
-	uart2_pins: uart2_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)	/* spi0_sclk.uart2_rxd */
-			AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)	/* spi0_d0.uart2_txd */
-		>;
-	};
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	status = "okay";
-};
-
-&rtc {
-	system-power-controller;
-};
diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
deleted file mode 100644
index 57731f0daf10..000000000000
--- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-bone-common.dtsi"
-#include "am335x-bonegreen-common.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "TI AM335x BeagleBone Green Wireless";
-	compatible = "ti,am335x-bone-green-wireless", "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
-
-	wlan_en_reg: fixedregulator@2 {
-		compatible = "regulator-fixed";
-		regulator-name = "wlan-en-regulator";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		startup-delay-us= <70000>;
-
-		/* WL_EN */
-		gpio = <&gpio0 26 0>;
-		enable-active-high;
-	};
-};
-
-&am33xx_pinmux {
-	bt_pins: pinmux_bt_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_ad12.gpio1_28 BT_EN */
-		>;
-	};
-
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ad12.mmc2_dat0 */
-			AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ad13.mmc2_dat1 */
-			AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ad14.mmc2_dat2 */
-			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ad15.mmc2_dat3 */
-			AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd */
-			AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc2_clk */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1)	/* gmii1_rxd3.uart3_rxd */
-			AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* gmii1_rxd2.uart3_txd */
-			AM33XX_IOPAD(0x948, PIN_INPUT | MUX_MODE3)		/* mdio_data.uart3_ctsn */
-			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* mdio_clk.uart3_rtsn */
-		>;
-	};
-
-	wl18xx_pins: pinmux_wl18xx_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x828, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad10.gpio0_26 WL_EN */
-			AM33XX_IOPAD(0x82C, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad11.gpio0_27 WL_IRQ */
-			AM33XX_IOPAD(0x87C, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_csn0.gpio1_29 LS_BUF_EN */
-		>;
-	};
-};
-
-&mac {
-	status = "disabled";
-};
-
-&mmc3 {
-	dmas = <&edma_xbar 12 0 1
-		&edma_xbar 13 0 2>;
-	dma-names = "tx", "rx";
-	status = "okay";
-	vmmc-supply = <&wlan_en_reg>;
-	bus-width = <4>;
-	non-removable;
-	cap-power-off-card;
-	ti,needs-special-hs-handling;
-	keep-power-in-suspend;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1835";
-		reg = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <27 IRQ_TYPE_EDGE_RISING>;
-	};
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins &bt_pins>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "ti,wl1835-st";
-		enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&gpio1 {
-	ls_buf_en {
-		gpio-hog;
-		gpios = <29 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "LS_BUF_EN";
-	};
-};
-
-/* BT_AUD_OUT from wl1835 has to be pulled low when WL_EN is activated.*/
-/* in case it isn't, wilink8 ends up in one of the test modes that     */
-/* intruces various issues (elp wkaeup timeouts etc.)                  */
-/* On the BBGW this pin is routed through the level shifter (U21) that */
-/* introduces a pullup on the line and wilink8 ends up in a bad state. */
-/* use a gpio hog to force this pin low. An alternative may be adding  */
-/* an external pulldown on U21 pin 4.                                  */
-
-&gpio3 {
-	bt_aud_in {
-		gpio-hog;
-		gpios = <16 GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "MCASP0_AHCLKR";
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts
deleted file mode 100644
index a8b4d969ce2a..000000000000
--- a/arch/arm/boot/dts/am335x-bonegreen.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-bone-common.dtsi"
-#include "am335x-bonegreen-common.dtsi"
-
-/ {
-	model = "TI AM335x BeagleBone Green";
-	compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
-};
diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts
deleted file mode 100644
index d8769799772e..000000000000
--- a/arch/arm/boot/dts/am335x-chiliboard.dts
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/
- * Author: Rostislav Lisovy <lisovy@jablotron.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-#include "am335x-chilisom.dtsi"
-
-/ {
-	model = "AM335x Chiliboard";
-	compatible = "grinn,am335x-chiliboard", "grinn,am335x-chilisom",
-		     "ti,am33xx";
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_gpio_pins>;
-
-		led0 {
-			label = "led0";
-			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-	};
-};
-
-&am33xx_pinmux {
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)  /* mii1_crs.rmii1_crs */
-			AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
-			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
-			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
-			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
-			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_ref_clk.rmii_ref_clk */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* mdio_data.mdio_data */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
-			/* mdio_clk.mdio_clk */
-			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	usb1_drvvbus: usb1_drvvbus {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
-		>;
-	};
-
-	sd_pins: pinmux_sd_card {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
-			AM33XX_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
-			AM33XX_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
-			AM33XX_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
-			AM33XX_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
-			AM33XX_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
-			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-		>;
-	};
-
-	led_gpio_pins: led_gpio_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9e4, PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */
-			AM33XX_IOPAD(0x9e8, PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&ldo4_reg {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-};
-
-/* Ethernet */
-&mac {
-	slaves = <1>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rmii";
-};
-
-&phy_sel {
-	rmii-clock-ext;
-};
-
-/* USB */
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_drvvbus>;
-
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-/* microSD */
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd_pins>;
-	vmmc-supply = <&ldo4_reg>;
-	bus-width = <0x4>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&tps {
-	interrupt-parent = <&intc>;
-	interrupts = <7>; /* NNMI */
-
-	charger {
-		interrupts = <0>, <1>;
-		interrupt-names = "USB", "AC";
-		status = "okay";
-	};
-
-	pwrbutton {
-		interrupts = <2>;
-		status = "okay";
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi
deleted file mode 100644
index 1b43ebd08b38..000000000000
--- a/arch/arm/boot/dts/am335x-chilisom.dtsi
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/
- * Author: Rostislav Lisovy <lisovy@jablotron.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include "am33xx.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "Grinn AM335x ChiliSOM";
-	compatible = "grinn,am335x-chilisom", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	nandflash_pins: nandflash_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			AM33XX_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			AM33XX_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			AM33XX_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			AM33XX_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			AM33XX_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-
-			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_csn0.gpmc_csn0 */
-			AM33XX_IOPAD(0x890, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_advn_ale.gpmc_advn_ale */
-			AM33XX_IOPAD(0x894, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_oen_ren.gpmc_oen_ren */
-			AM33XX_IOPAD(0x898, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_wen.gpmc_wen */
-			AM33XX_IOPAD(0x89c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_be0n_cle.gpmc_be0n_cle */
-		>;
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-
-};
-
-/include/ "tps65217.dtsi"
-
-&tps {
-	regulators {
-		dcdc1_reg: regulator@0 {
-			regulator-name = "vdds_dpr";
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			regulator-name = "vio,vrtc,vdds";
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			regulator-name = "vdd_3v3aux";
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			regulator-name = "vdd_1v8";
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			regulator-name = "vdd_3v3d";
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-};
-
-&rtc {
-	system-power-controller;
-
-	pinctrl-0 = <&ext_wakeup>;
-	pinctrl-names = "default";
-
-	ext_wakeup: ext-wakeup {
-		pins = "ext_wakeup0";
-		input-enable;
-	};
-};
-
-/* NAND Flash */
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins>;
-	ranges = <0 0 0x08000000 0x01000000>; /* CS0 0 @addr 0x08000000, size 0x01000000 */
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-		ti,nand-ecc-opt = "bch8";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
deleted file mode 100644
index 947c81b7aaaf..000000000000
--- a/arch/arm/boot/dts/am335x-cm-t335.dts
+++ /dev/null
@@ -1,569 +0,0 @@
-/*
- * am335x-cm-t335.dts - Device Tree file for Compulab CM-T335
- *
- * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "CompuLab CM-T335";
-	compatible = "compulab,cm-t335", "ti,am33xx";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>;	/* 128 MB */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_led_pins>;
-		led0 {
-			label = "cm_t335:green";
-			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;	/* gpio2_0 */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	/* regulator for mmc */
-	vmmc_fixed: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmc_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	/* Regulator for WiFi */
-	vwlan_fixed: fixedregulator2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vwlan_fixed";
-		gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */
-		enable-active-high;
-		regulator-boot-off;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 0>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "cm-t335";
-
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Line", "Line In",
-			"Headphone", "Headphone Jack";
-
-		simple-audio-card,routing =
-			"Headphone Jack", "LHPOUT",
-			"Headphone Jack", "RHPOUT",
-			"LLINEIN", "Line In",
-			"RLINEIN", "Line In",
-			"MICIN", "Mic Jack";
-
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sound_master>;
-		simple-audio-card,frame-master = <&sound_master>;
-
-		simple-audio-card,cpu {
-			sound-dai = <&mcasp1>;
-		};
-
-		sound_master: simple-audio-card,codec {
-			sound-dai = <&tlv320aic23>;
-			system-clock-frequency = <12000000>;
-		};
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&bluetooth_pins>;
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			/* i2c0_sda.i2c0_sda */
-			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)
-			/* i2c0_scl.i2c0_scl */
-			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			/* uart0_ctsn.i2c1_sda */
-			AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE2)
-			/* uart0_rtsn.i2c1_scl */
-			AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2)
-		>;
-	};
-
-	gpio_led_pins: pinmux_gpio_led_pins {
-		pinctrl-single,pins = <
-			/* gpmc_csn3.gpio2_0 */
-			AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE7)
-		>;
-	};
-
-	nandflash_pins: pinmux_nandflash_pins {
-		pinctrl-single,pins = <
-			/* gpmc_ad0.gpmc_ad0 */
-			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)
-			/* gpmc_ad1.gpmc_ad1 */
-			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)
-			/* gpmc_ad2.gpmc_ad2 */
-			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)
-			/* gpmc_ad3.gpmc_ad3 */
-			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)
-			/* gpmc_ad4.gpmc_ad4 */
-			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)
-			/* gpmc_ad5.gpmc_ad5 */
-			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)
-			/* gpmc_ad6.gpmc_ad6 */
-			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)
-			/* gpmc_ad7.gpmc_ad7 */
-			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)
-			/* gpmc_wait0.gpmc_wait0 */
-			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)
-			/* gpmc_wpn.gpio0_30 */
-			AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)
-			/* gpmc_csn0.gpmc_csn0  */
-			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
-			/* gpmc_advn_ale.gpmc_advn_ale */
-			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
-			/* gpmc_oen_ren.gpmc_oen_ren */
-			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
-			/* gpmc_wen.gpmc_wen */
-			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
-			/* gpmc_ben0_cle.gpmc_ben0_cle */
-			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			/* uart0_rxd.uart0_rxd */
-			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
-			/* uart0_txd.uart0_txd */
-			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			/* uart1_ctsn.uart1_ctsn */
-			AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0)
-			/* uart1_rtsn.uart1_rtsn */
-			AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
-			/* uart1_rxd.uart1_rxd */
-			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)
-			/* uart1_txd.uart1_txd */
-			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
-		>;
-	};
-
-	dcan0_pins: pinmux_dcan0_pins {
-		pinctrl-single,pins = <
-			/* uart1_ctsn.dcan0_tx */
-			AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2)
-			/* uart1_rtsn.dcan0_rx */
-			AM33XX_IOPAD(0x97C, PIN_INPUT | MUX_MODE2)
-		>;
-	};
-
-	dcan1_pins: pinmux_dcan1_pins {
-		pinctrl-single,pins = <
-			/* uart1_rxd.dcan1_tx */
-			AM33XX_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2)
-			/* uart1_txd.dcan1_rx */
-			AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE2)
-		>;
-	};
-
-	ecap0_pins: pinmux_ecap0_pins {
-		pinctrl-single,pins = <
-			/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
-			AM33XX_IOPAD(0x964, 0x0)
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			/* mii1_tx_en.rgmii1_tctl */
-			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
-			/* mii1_rxdv.rgmii1_rctl */
-			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)
-			/* mii1_txd3.rgmii1_td3 */
-			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
-			/* mii1_txd2.rgmii1_td2 */
-			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
-			/* mii1_txd1.rgmii1_td1 */
-			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
-			/* mii1_txd0.rgmii1_td0 */
-			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
-			/* mii1_txclk.rgmii1_tclk */
-			AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
-			/* mii1_rxclk.rgmii1_rclk */
-			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)
-			/* mii1_rxd3.rgmii1_rd3 */
-			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)
-			/* mii1_rxd2.rgmii1_rd2 */
-			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)
-			/* mii1_rxd1.rgmii1_rd1 */
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)
-			/* mii1_rxd0.rgmii1_rd0 */
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* mdio_data.mdio_data */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
-			/* mdio_clk.mdio_clk */
-			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			/* mmc0_dat3.mmc0_dat3 */
-			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)
-			/* mmc0_dat2.mmc0_dat2 */
-			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)
-			/* mmc0_dat1.mmc0_dat1 */
-			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)
-			/* mmc0_dat0.mmc0_dat0 */
-			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)
-			/* mmc0_clk.mmc0_clk */
-			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)
-			/* mmc0_cmd.mmc0_cmd */
-			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)
-		>;
-	};
-
-	spi0_pins: pinmux_spi0_pins {
-		pinctrl-single,pins = <
-			/* spi0_sclk.spi0_sclk */
-			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE0)
-			/* spi0_d0.spi0_d0 */
-			AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			/* spi0_d1.spi0_d1 */
-			AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE0)
-			/* spi0_cs0.spi0_cs0 */
-			AM33XX_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0)
-			/* spi0_cs1.spi0_cs1 */
-			AM33XX_IOPAD(0x960, PIN_OUTPUT | MUX_MODE0)
-		>;
-	};
-
-	/* wl1271 bluetooth */
-	bluetooth_pins: pinmux_bluetooth_pins {
-		pinctrl-single,pins = <
-			/* XDMA_EVENT_INTR0.gpio0_19 - bluetooth enable */
-			AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE7)
-		>;
-	};
-
-	/* TLV320AIC23B codec */
-	mcasp1_pins: pinmux_mcasp1_pins {
-		pinctrl-single,pins = <
-			/* MII1_CRS.mcasp1_aclkx */
-			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4)
-			/* MII1_RX_ER.mcasp1_fsx */
-			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4)
-			/* MII1_COL.mcasp1_axr2 */
-			AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE4)
-			/* RMII1_REF_CLK.mcasp1_axr3 */
-			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4)
-		>;
-	};
-
-	/* wl1271 WiFi */
-	wifi_pins: pinmux_wifi_pins {
-		pinctrl-single,pins = <
-			/* EMU1.gpio3_8 - WiFi IRQ */
-			AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7)
-			/* XDMA_EVENT_INTR1.gpio0_20 - WiFi enable */
-			AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7)
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-/* WLS1271 bluetooth */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-
-status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-	/* CM-T335 board EEPROM */
-	eeprom: 24c02@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-	/* Real Time Clock */
-	ext_rtc: em3027@56 {
-		compatible = "emmicro,em3027";
-		reg = <0x56>;
-	};
-	/* Audio codec */
-	tlv320aic23: codec@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-		#sound-dai-cells= <0>;
-		status = "okay";
-	};
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-&epwmss0 {
-	status = "okay";
-
-	ecap0: ecap@48300100 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ecap0_pins>;
-	};
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins>;
-	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-		ti,nand-ecc-opt = "bch8";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "spl";
-			reg = <0x00000000 0x00200000>;
-		};
-		partition@1 {
-			label = "uboot";
-			reg = <0x00200000 0x00100000>;
-		};
-		partition@2 {
-			label = "uboot environment";
-			reg = <0x00300000 0x00100000>;
-		};
-		partition@3 {
-			label = "dtb";
-			reg = <0x00400000 0x00100000>;
-		};
-		partition@4 {
-			label = "splash";
-			reg = <0x00500000 0x00400000>;
-		};
-		partition@5 {
-			label = "linux";
-			reg = <0x00900000 0x00600000>;
-		};
-		partition@6 {
-			label = "rootfs";
-			reg = <0x00F00000 0>;
-		};
-	};
-};
-
-&elm {
-	status = "okay";
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	slaves = <1>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii-txid";
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmc_fixed>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-};
-
-&dcan0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan0_pins>;
-};
-
-&dcan1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan1_pins>;
-};
-
-/* Touschscreen and analog digital converter */
-&tscadc {
-	status = "okay";
-	tsc {
-		ti,wires = <4>;
-		ti,x-plate-resistance = <200>;
-		ti,coordinate-readouts = <5>;
-		ti,wire-config = <0x01 0x10 0x23 0x32>;
-		ti,charge-delay = <0x400>;
-	};
-
-	adc {
-		ti,adc-channels = <4 5 6 7>;
-	};
-};
-
-/* CPU audio */
-&mcasp1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&mcasp1_pins>;
-
-		op-mode = <0>;          /* MCASP_IIS_MODE */
-		tdm-slots = <2>;
-		/* 16 serializers */
-		num-serializer = <16>;
-		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 2 1 0 0 0 0 0 0 0 0 0 0 0 0
-		>;
-		tx-num-evt = <1>;
-		rx-num-evt = <1>;
-
-		#sound-dai-cells= <0>;
-		status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-	ti,pindir-d0-out-d1-in = <1>;
-	/* WLS1271 WiFi */
-	wlcore: wlcore@1 {
-		compatible = "ti,wl1271";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_pins>;
-		reg = <1>;
-		spi-max-frequency = <48000000>;
-		clock-xtal;
-		ref-clock-frequency = <38400000>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-		vwlan-supply = <&vwlan_fixed>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
deleted file mode 100644
index 1c37a7c1ea17..000000000000
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ /dev/null
@@ -1,794 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "TI AM335x EVM";
-	compatible = "ti,am335x-evm", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	vbat: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	lis3_reg: fixedregulator1 {
-		compatible = "regulator-fixed";
-		regulator-name = "lis3_reg";
-		regulator-boot-on;
-	};
-
-	wlan_en_reg: fixedregulator2 {
-		compatible = "regulator-fixed";
-		regulator-name = "wlan-en-regulator";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		/* WLAN_EN GPIO for this board - Bank1, pin16 */
-		gpio = <&gpio1 16 0>;
-
-		/* WLAN card specific delay */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	matrix_keypad: matrix_keypad0 {
-		compatible = "gpio-matrix-keypad";
-		debounce-delay-ms = <5>;
-		col-scan-delay-us = <2>;
-
-		row-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH		/* Bank1, pin25 */
-			     &gpio1 26 GPIO_ACTIVE_HIGH		/* Bank1, pin26 */
-			     &gpio1 27 GPIO_ACTIVE_HIGH>;	/* Bank1, pin27 */
-
-		col-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH		/* Bank1, pin21 */
-			     &gpio1 22 GPIO_ACTIVE_HIGH>;	/* Bank1, pin22 */
-
-		linux,keymap = <0x0000008b	/* MENU */
-				0x0100009e	/* BACK */
-				0x02000069	/* LEFT */
-				0x0001006a	/* RIGHT */
-				0x0101001c	/* ENTER */
-				0x0201006c>;	/* DOWN */
-	};
-
-	gpio_keys: volume_keys0 {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
-
-		switch9 {
-			label = "volume-up";
-			linux,code = <115>;
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
-
-		switch10 {
-			label = "volume-down";
-			linux,code = <114>;
-			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 0>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
-
-	panel {
-		compatible = "ti,tilcdc,panel";
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins_s0>;
-		panel-info {
-			ac-bias           = <255>;
-			ac-bias-intrpt    = <0>;
-			dma-burst-sz      = <16>;
-			bpp               = <32>;
-			fdd               = <0x80>;
-			sync-edge         = <0>;
-			sync-ctrl         = <1>;
-			raster-order      = <0>;
-			fifo-th           = <0>;
-		};
-
-		display-timings {
-			800x480p62 {
-				clock-frequency = <30000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <39>;
-				hback-porch = <39>;
-				hsync-len = <47>;
-				vback-porch = <29>;
-				vfront-porch = <13>;
-				vsync-len = <2>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "AM335x-EVM";
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack",
-			"Line", "Line In";
-		simple-audio-card,routing =
-			"Headphone Jack",	"HPLOUT",
-			"Headphone Jack",	"HPROUT",
-			"LINE1L",		"Line In",
-			"LINE1R",		"Line In";
-		simple-audio-card,format = "dsp_b";
-		simple-audio-card,bitclock-master = <&sound_master>;
-		simple-audio-card,frame-master = <&sound_master>;
-		simple-audio-card,bitclock-inversion;
-
-		simple-audio-card,cpu {
-			sound-dai = <&mcasp1>;
-		};
-
-		sound_master: simple-audio-card,codec {
-			sound-dai = <&tlv320aic3106>;
-			system-clock-frequency = <12000000>;
-		};
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
-
-	matrix_keypad_s0: matrix_keypad_s0 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
-			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
-			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
-		>;
-	};
-
-	volume_keys_s0: volume_keys_s0 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_sclk.gpio0_2 */
-			AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_d0.gpio0_3 */
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
-			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0)		/* uart1_ctsn.uart1_ctsn */
-			AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
-			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
-		>;
-	};
-
-	clkout2_pin: pinmux_clkout2_pin {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-		>;
-	};
-
-	nandflash_pins_s0: nandflash_pins_s0 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-		>;
-	};
-
-	ecap0_pins: backlight_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x964, MUX_MODE0)	/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-		>;
-	};
-
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
-			AM33XX_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
-			AM33XX_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
-			AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
-			AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
-			AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
-		>;
-	};
-
-	wlan_pins: pinmux_wlan_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.gpio1_16 */
-			AM33XX_IOPAD(0x99c, PIN_INPUT | MUX_MODE7)		/* mcasp0_ahclkr.gpio3_17 */
-			AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* mcasp0_ahclkx.gpio3_21 */
-		>;
-	};
-
-	lcd_pins_s0: lcd_pins_s0 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad8.lcd_data23 */
-			AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad9.lcd_data22 */
-			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad10.lcd_data21 */
-			AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad11.lcd_data20 */
-			AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad12.lcd_data19 */
-			AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad13.lcd_data18 */
-			AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad14.lcd_data17 */
-			AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad15.lcd_data16 */
-			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */
-			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */
-			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */
-			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */
-			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */
-			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */
-			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */
-			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */
-			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */
-			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */
-			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */
-			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */
-			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */
-			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */
-			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */
-			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */
-			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)		/* lcd_vsync.lcd_vsync */
-			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)		/* lcd_hsync.lcd_hsync */
-			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)		/* lcd_pclk.lcd_pclk */
-			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)		/* lcd_ac_bias_en.lcd_ac_bias_en */
-		>;
-	};
-
-	mcasp1_pins: mcasp1_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
-			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
-			AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
-			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
-		>;
-	};
-
-	mcasp1_pins_sleep: mcasp1_pins_sleep {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	dcan1_pins_default: dcan1_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
-			AM33XX_IOPAD(0x96c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-	};
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	status = "okay";
-	clock-frequency = <100000>;
-
-	lis331dlh: lis331dlh@18 {
-		compatible = "st,lis331dlh", "st,lis3lv02d";
-		reg = <0x18>;
-		Vdd-supply = <&lis3_reg>;
-		Vdd_IO-supply = <&lis3_reg>;
-
-		st,click-single-x;
-		st,click-single-y;
-		st,click-single-z;
-		st,click-thresh-x = <10>;
-		st,click-thresh-y = <10>;
-		st,click-thresh-z = <10>;
-		st,irq1-click;
-		st,irq2-click;
-		st,wakeup-x-lo;
-		st,wakeup-x-hi;
-		st,wakeup-y-lo;
-		st,wakeup-y-hi;
-		st,wakeup-z-lo;
-		st,wakeup-z-hi;
-		st,min-limit-x = <120>;
-		st,min-limit-y = <120>;
-		st,min-limit-z = <140>;
-		st,max-limit-x = <550>;
-		st,max-limit-y = <550>;
-		st,max-limit-z = <750>;
-	};
-
-	tsl2550: tsl2550@39 {
-		compatible = "taos,tsl2550";
-		reg = <0x39>;
-	};
-
-	tmp275: tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tlv320aic3106: tlv320aic3106@1b {
-		#sound-dai-cells = <0>;
-		compatible = "ti,tlv320aic3106";
-		reg = <0x1b>;
-		status = "okay";
-
-		/* Regulators */
-		AVDD-supply = <&vaux2_reg>;
-		IOVDD-supply = <&vaux2_reg>;
-		DRVDD-supply = <&vaux2_reg>;
-		DVDD-supply = <&vbat>;
-	};
-};
-
-&lcdc {
-	status = "okay";
-
-	blue-and-red-wiring = "crossed";
-};
-
-&elm {
-	status = "okay";
-};
-
-&epwmss0 {
-	status = "okay";
-
-	ecap0: ecap@48300100 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ecap0_pins>;
-	};
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins_s0>;
-	ranges = <0 0 0x08000000 0x1000000>;	/* CS0: 16MB for NAND */
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-		ti,nand-ecc-opt = "bch8";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		/* All SPL-* partitions are sized to minimal length
-		 * which can be independently programmable. For
-		 * NAND flash this is equal to size of erase-block */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "NAND.SPL";
-			reg = <0x00000000 0x000020000>;
-		};
-		partition@1 {
-			label = "NAND.SPL.backup1";
-			reg = <0x00020000 0x00020000>;
-		};
-		partition@2 {
-			label = "NAND.SPL.backup2";
-			reg = <0x00040000 0x00020000>;
-		};
-		partition@3 {
-			label = "NAND.SPL.backup3";
-			reg = <0x00060000 0x00020000>;
-		};
-		partition@4 {
-			label = "NAND.u-boot-spl-os";
-			reg = <0x00080000 0x00040000>;
-		};
-		partition@5 {
-			label = "NAND.u-boot";
-			reg = <0x000C0000 0x00100000>;
-		};
-		partition@6 {
-			label = "NAND.u-boot-env";
-			reg = <0x001C0000 0x00020000>;
-		};
-		partition@7 {
-			label = "NAND.u-boot-env.backup1";
-			reg = <0x001E0000 0x00020000>;
-		};
-		partition@8 {
-			label = "NAND.kernel";
-			reg = <0x00200000 0x00800000>;
-		};
-		partition@9 {
-			label = "NAND.file-system";
-			reg = <0x00A00000 0x0F600000>;
-		};
-	};
-};
-
-#include "tps65910.dtsi"
-
-&mcasp1 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&mcasp1_pins>;
-	pinctrl-1 = <&mcasp1_pins_sleep>;
-
-	status = "okay";
-
-	op-mode = <0>;          /* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	/* 4 serializers */
-	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-		0 0 1 2
-	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1351500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii-txid";
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rgmii-txid";
-};
-
-&tscadc {
-	status = "okay";
-	tsc {
-		ti,wires = <4>;
-		ti,x-plate-resistance = <200>;
-		ti,coordinate-readouts = <5>;
-		ti,wire-config = <0x00 0x11 0x22 0x33>;
-		ti,charge-delay = <0x400>;
-	};
-
-	adc {
-		ti,adc-channels = <4 5 6 7>;
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmc_reg>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
-
-&mmc3 {
-	/* these are on the crossbar and are outlined in the
-	   xbar-event-map element */
-	dmas = <&edma_xbar 12 0 1
-		&edma_xbar 13 0 2>;
-	dma-names = "tx", "rx";
-	status = "okay";
-	vmmc-supply = <&wlan_en_reg>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins &wlan_pins>;
-	ti,non-removable;
-	ti,needs-special-hs-handling;
-	cap-power-off-card;
-	keep-power-in-suspend;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@0 {
-		compatible = "ti,wl1835";
-		reg = <2>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
-
-&dcan1 {
-	status = "disabled";	/* Enable only if Profile 1 is selected */
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan1_pins_default>;
-};
-
-&rtc {
-	clocks = <&clk_32768_ck>, <&clkdiv32k_ick>;
-	clock-names = "ext-clk", "int-clk";
-};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
deleted file mode 100644
index 9ba4b18c0cb2..000000000000
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ /dev/null
@@ -1,727 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * AM335x Starter Kit
- * http://www.ti.com/tool/tmdssk3358
- */
-
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "TI AM335x EVM-SK";
-	compatible = "ti,am335x-evmsk", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	vbat: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	lis3_reg: fixedregulator1 {
-		compatible = "regulator-fixed";
-		regulator-name = "lis3_reg";
-		regulator-boot-on;
-	};
-
-	wl12xx_vmmc: fixedregulator2 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio1 29 0>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	vtt_fixed: fixedregulator3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vtt";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		gpio = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-		regulator-always-on;
-		regulator-boot-on;
-		enable-active-high;
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
-
-		compatible = "gpio-leds";
-
-		led1 {
-			label = "evmsk:green:usr0";
-			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led2 {
-			label = "evmsk:green:usr1";
-			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led3 {
-			label = "evmsk:green:mmc0";
-			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led4 {
-			label = "evmsk:green:heartbeat";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-
-	gpio_buttons: gpio_buttons0 {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch1 {
-			label = "button0";
-			linux,code = <0x100>;
-			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		switch2 {
-			label = "button1";
-			linux,code = <0x101>;
-			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		switch3 {
-			label = "button2";
-			linux,code = <0x102>;
-			gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
-			wakeup-source;
-		};
-
-		switch4 {
-			label = "button3";
-			linux,code = <0x103>;
-			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 58 61 66 75 90 125 170 255>;
-		default-brightness-level = <8>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "AM335x-EVMSK";
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"Headphone Jack",	"HPLOUT",
-			"Headphone Jack",	"HPROUT";
-		simple-audio-card,format = "dsp_b";
-		simple-audio-card,bitclock-master = <&sound_master>;
-		simple-audio-card,frame-master = <&sound_master>;
-		simple-audio-card,bitclock-inversion;
-
-		simple-audio-card,cpu {
-			sound-dai = <&mcasp1>;
-		};
-
-		sound_master: simple-audio-card,codec {
-			sound-dai = <&tlv320aic3106>;
-			system-clock-frequency = <24000000>;
-		};
-	};
-
-	panel {
-		compatible = "ti,tilcdc,panel";
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&lcd_pins_default>;
-		pinctrl-1 = <&lcd_pins_sleep>;
-		status = "okay";
-		panel-info {
-			ac-bias		= <255>;
-			ac-bias-intrpt	= <0>;
-			dma-burst-sz	= <16>;
-			bpp		= <32>;
-			fdd		= <0x80>;
-			sync-edge	= <0>;
-			sync-ctrl	= <1>;
-			raster-order	= <0>;
-			fifo-th		= <0>;
-		};
-		display-timings {
-			480x272 {
-				hactive		= <480>;
-				vactive		= <272>;
-				hback-porch	= <43>;
-				hfront-porch	= <8>;
-				hsync-len	= <4>;
-				vback-porch	= <12>;
-				vfront-porch	= <4>;
-				vsync-len	= <10>;
-				clock-frequency = <9000000>;
-				hsync-active	= <0>;
-				vsync-active	= <0>;
-			};
-		};
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
-
-	lcd_pins_default: lcd_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data23 */
-			AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data22 */
-			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data21 */
-			AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data20 */
-			AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data19 */
-			AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data18 */
-			AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data17 */
-			AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data16 */
-			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
-			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
-			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
-			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
-			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
-			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
-			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
-			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
-			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
-			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
-			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
-			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
-			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
-			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
-			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
-			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
-			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
-			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
-			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
-			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
-		>;
-	};
-
-	lcd_pins_sleep: lcd_pins_sleep {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad8.lcd_data23 */
-			AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad9.lcd_data22 */
-			AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad10.lcd_data21 */
-			AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad11.lcd_data20 */
-			AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad12.lcd_data19 */
-			AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad13.lcd_data18 */
-			AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad14.lcd_data17 */
-			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad15.lcd_data16 */
-			AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7)	/* lcd_data0.lcd_data0 */
-			AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7)	/* lcd_data1.lcd_data1 */
-			AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7)	/* lcd_data2.lcd_data2 */
-			AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7)	/* lcd_data3.lcd_data3 */
-			AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7)	/* lcd_data4.lcd_data4 */
-			AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7)	/* lcd_data5.lcd_data5 */
-			AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7)	/* lcd_data6.lcd_data6 */
-			AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7)	/* lcd_data7.lcd_data7 */
-			AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7)	/* lcd_data8.lcd_data8 */
-			AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7)	/* lcd_data9.lcd_data9 */
-			AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7)	/* lcd_data10.lcd_data10 */
-			AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7)	/* lcd_data11.lcd_data11 */
-			AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7)	/* lcd_data12.lcd_data12 */
-			AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7)	/* lcd_data13.lcd_data13 */
-			AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7)	/* lcd_data14.lcd_data14 */
-			AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7)	/* lcd_data15.lcd_data15 */
-			AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_vsync.lcd_vsync */
-			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_hsync.lcd_hsync */
-			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_pclk.lcd_pclk */
-			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_ac_bias_en.lcd_ac_bias_en */
-		>;
-	};
-
-
-	user_leds_s0: user_leds_s0 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x810, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
-			AM33XX_IOPAD(0x814, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
-			AM33XX_IOPAD(0x818, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad6.gpio1_6 */
-			AM33XX_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad7.gpio1_7 */
-		>;
-	};
-
-	gpio_keys_s0: gpio_keys_s0 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
-			AM33XX_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
-			AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
-			AM33XX_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ben0_cle.gpio2_5 */
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	clkout2_pin: pinmux_clkout2_pin {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-		>;
-	};
-
-	ecap2_pins: backlight_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x99c, MUX_MODE4)	/* mcasp0_ahclkr.ecap2_in_pwm2_out */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-
-			/* Slave 2 */
-			AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
-			AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
-			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
-
-			/* Slave 2 reset value*/
-			AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-		>;
-	};
-
-	mcasp1_pins: mcasp1_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
-			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
-			AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
-			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
-		>;
-	};
-
-	mcasp1_pins_sleep: mcasp1_pins_sleep {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
-			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-		>;
-	};
-
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-	};
-
-	lis331dlh: lis331dlh@18 {
-		compatible = "st,lis331dlh", "st,lis3lv02d";
-		reg = <0x18>;
-		Vdd-supply = <&lis3_reg>;
-		Vdd_IO-supply = <&lis3_reg>;
-
-		st,click-single-x;
-		st,click-single-y;
-		st,click-single-z;
-		st,click-thresh-x = <10>;
-		st,click-thresh-y = <10>;
-		st,click-thresh-z = <10>;
-		st,irq1-click;
-		st,irq2-click;
-		st,wakeup-x-lo;
-		st,wakeup-x-hi;
-		st,wakeup-y-lo;
-		st,wakeup-y-hi;
-		st,wakeup-z-lo;
-		st,wakeup-z-hi;
-		st,min-limit-x = <120>;
-		st,min-limit-y = <120>;
-		st,min-limit-z = <140>;
-		st,max-limit-x = <550>;
-		st,max-limit-y = <550>;
-		st,max-limit-z = <750>;
-	};
-
-	tlv320aic3106: tlv320aic3106@1b {
-		#sound-dai-cells = <0>;
-		compatible = "ti,tlv320aic3106";
-		reg = <0x1b>;
-		status = "okay";
-
-		/* Regulators */
-		AVDD-supply = <&vaux2_reg>;
-		IOVDD-supply = <&vaux2_reg>;
-		DRVDD-supply = <&vaux2_reg>;
-		DVDD-supply = <&vbat>;
-	};
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-&epwmss2 {
-	status = "okay";
-
-	ecap2: ecap@48304100 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ecap2_pins>;
-	};
-};
-
-#include "tps65910.dtsi"
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1351500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	dual_emac = <1>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii-txid";
-	dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rgmii-txid";
-	dual_emac_res_vlan = <2>;
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmc_reg>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
-
-&gpio0 {
-	ti,no-reset-on-init;
-};
-
-&mmc2 {
-	status = "okay";
-	vmmc-supply = <&wl12xx_vmmc>;
-	ti,non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-&mcasp1 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&mcasp1_pins>;
-	pinctrl-1 = <&mcasp1_pins_sleep>;
-
-	status = "okay";
-
-	op-mode = <0>;          /* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	/* 4 serializers */
-	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-		0 0 1 2
-	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
-&tscadc {
-	status = "okay";
-	tsc {
-		ti,wires = <4>;
-		ti,x-plate-resistance = <200>;
-		ti,coordinate-readouts = <5>;
-		ti,wire-config = <0x00 0x11 0x22 0x33>;
-	};
-};
-
-&lcdc {
-	status = "okay";
-
-	blue-and-red-wiring = "crossed";
-};
-
-&rtc {
-	clocks = <&clk_32768_ck>, <&clkdiv32k_ick>;
-	clock-names = "ext-clk", "int-clk";
-};
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
deleted file mode 100644
index f2005ecca74f..000000000000
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ /dev/null
@@ -1,506 +0,0 @@
-/*
- * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * AM335x ICE V2 board
- * http://www.ti.com/tool/tmdsice3359
- */
-
-/dts-v1/;
-
-#include "am33xx.dtsi"
-
-/ {
-	model = "TI AM3359 ICE-V2";
-	compatible = "ti,am3359-icev2", "ti,am33xx";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	vbat: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	vtt_fixed: fixedregulator1 {
-		compatible = "regulator-fixed";
-		regulator-name = "vtt";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		regulator-always-on;
-		regulator-boot-on;
-		enable-active-high;
-	};
-
-	leds-iio {
-		status = "disabled";
-		compatible = "gpio-leds";
-		led-out0 {
-			label = "out0";
-			gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out1 {
-			label = "out1";
-			gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out2 {
-			label = "out2";
-			gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out3 {
-			label = "out3";
-			gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out4 {
-			label = "out4";
-			gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out5 {
-			label = "out5";
-			gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out6 {
-			label = "out6";
-			gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led-out7 {
-			label = "out7";
-			gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	/* Tricolor status LEDs */
-	leds1 {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds>;
-
-		led0 {
-			label = "status0:red:cpu0";
-			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "cpu0";
-		};
-
-		led1 {
-			label = "status0:green:usr";
-			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led2 {
-			label = "status0:yellow:usr";
-			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led3 {
-			label = "status1:red:mmc0";
-			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc0";
-		};
-
-		led4 {
-			label = "status1:green:usr";
-			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led5 {
-			label = "status1:yellow:usr";
-			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-	gpio-decoder {
-		compatible = "gpio-decoder";
-		gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
-			<&pca9536 2 GPIO_ACTIVE_HIGH>,
-			<&pca9536 1 GPIO_ACTIVE_HIGH>,
-			<&pca9536 0 GPIO_ACTIVE_HIGH>;
-		linux,axis = <0>; /* ABS_X */
-		decoder-max-value = <9>;
-	};
-};
-
-&am33xx_pinmux {
-	user_leds: user_leds {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE7) /* (J18) gmii1_txd3.gpio0[16] */
-			AM33XX_IOPAD(0x920, PIN_OUTPUT | MUX_MODE7) /* (K15) gmii1_txd2.gpio0[17] */
-			AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] */
-			AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7) /* (D14) xdma_event_intr1.gpio0[20] */
-			AM33XX_IOPAD(0x880, PIN_OUTPUT | MUX_MODE7) /* (U9) gpmc_csn1.gpio1[30] */
-			AM33XX_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] */
-		>;
-	};
-
-	mmc0_pins_default: mmc0_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */
-			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */
-			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */
-			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */
-			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */
-			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */
-		>;
-	};
-
-	i2c0_pins_default: i2c0_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */
-			AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */
-		>;
-	};
-
-	spi0_pins_default: spi0_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* (A17) spi0_sclk.spi0_sclk */
-			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */
-			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */
-			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */
-			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE0) /* (C15) spi0_cs1.spi0_cs1 */
-			AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* (B12) mcasp0_aclkr.gpio3[18] */
-		>;
-	};
-
-	uart3_pins_default: uart3_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */
-			AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLUP | MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1, RMII mode */
-			AM33XX_IOPAD(0x90c, (PIN_INPUT_PULLUP | MUX_MODE1))	/* mii1_crs.rmii1_crs_dv */
-			AM33XX_IOPAD(0x944, (PIN_INPUT_PULLUP | MUX_MODE0))	/* rmii1_refclk.rmii1_refclk */
-			AM33XX_IOPAD(0x940, (PIN_INPUT_PULLUP | MUX_MODE1))	/* mii1_rxd0.rmii1_rxd0 */
-			AM33XX_IOPAD(0x93c, (PIN_INPUT_PULLUP | MUX_MODE1))	/* mii1_rxd1.rmii1_rxd1 */
-			AM33XX_IOPAD(0x910, (PIN_INPUT_PULLUP | MUX_MODE1))	/* mii1_rxerr.rmii1_rxerr */
-			AM33XX_IOPAD(0x928, (PIN_OUTPUT_PULLDOWN | MUX_MODE1))	/* mii1_txd0.rmii1_txd0 */
-			AM33XX_IOPAD(0x924, (PIN_OUTPUT_PULLDOWN | MUX_MODE1))	/* mii1_txd1.rmii1_txd1 */
-			AM33XX_IOPAD(0x914, (PIN_OUTPUT_PULLDOWN | MUX_MODE1))	/* mii1_txen.rmii1_txen */
-			/* Slave 2, RMII mode */
-			AM33XX_IOPAD(0x870, (PIN_INPUT_PULLUP | MUX_MODE3))	/* gpmc_wait0.rmii2_crs_dv */
-			AM33XX_IOPAD(0x908, (PIN_INPUT_PULLUP | MUX_MODE1))	/* mii1_col.rmii2_refclk */
-			AM33XX_IOPAD(0x86c, (PIN_INPUT_PULLUP | MUX_MODE3))	/* gpmc_a11.rmii2_rxd0 */
-			AM33XX_IOPAD(0x868, (PIN_INPUT_PULLUP | MUX_MODE3))	/* gpmc_a10.rmii2_rxd1 */
-			AM33XX_IOPAD(0x874, (PIN_INPUT_PULLUP | MUX_MODE3))	/* gpmc_wpn.rmii2_rxerr */
-			AM33XX_IOPAD(0x854, (PIN_OUTPUT_PULLDOWN | MUX_MODE3))	/* gpmc_a5.rmii2_txd0 */
-			AM33XX_IOPAD(0x850, (PIN_OUTPUT_PULLDOWN | MUX_MODE3))	/* gpmc_a4.rmii2_txd1 */
-			AM33XX_IOPAD(0x840, (PIN_OUTPUT_PULLDOWN | MUX_MODE3))	/* gpmc_a0.rmii2_txen */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_IOPAD(0x90c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
-			AM33XX_IOPAD(0x944, (PIN_INPUT_PULLDOWN | MUX_MODE7))
-			AM33XX_IOPAD(0x940, (PIN_INPUT_PULLDOWN | MUX_MODE7))
-			AM33XX_IOPAD(0x93c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
-			AM33XX_IOPAD(0x910, (PIN_INPUT_PULLDOWN | MUX_MODE7))
-			AM33XX_IOPAD(0x928, (PIN_INPUT_PULLDOWN | MUX_MODE7))
-			AM33XX_IOPAD(0x924, (PIN_INPUT_PULLDOWN | MUX_MODE7))
-			AM33XX_IOPAD(0x914, (PIN_INPUT_PULLDOWN | MUX_MODE7))
-
-			/* Slave 2 reset value */
-			AM33XX_IOPAD(0x870, (PIN_INPUT_PULLDOWN | MUX_MODE7))
-			AM33XX_IOPAD(0x908, (PIN_INPUT_PULLDOWN | MUX_MODE7))
-			AM33XX_IOPAD(0x86c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
-			AM33XX_IOPAD(0x868, (PIN_INPUT_PULLDOWN | MUX_MODE7))
-			AM33XX_IOPAD(0x874, (PIN_INPUT_PULLDOWN | MUX_MODE7))
-			AM33XX_IOPAD(0x854, (PIN_INPUT_PULLDOWN | MUX_MODE7))
-			AM33XX_IOPAD(0x850, (PIN_INPUT_PULLDOWN | MUX_MODE7))
-			AM33XX_IOPAD(0x840, (PIN_INPUT_PULLDOWN | MUX_MODE7))
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_IOPAD(0x948, (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0))	/* mdio_data.mdio_data */
-			AM33XX_IOPAD(0x94c, (PIN_OUTPUT_PULLUP | MUX_MODE0))			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_IOPAD(0x948, (PIN_INPUT_PULLDOWN | MUX_MODE7))
-			AM33XX_IOPAD(0x94c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
-		>;
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_default>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: power-controller@2d {
-		reg = <0x2d>;
-	};
-
-	tpic2810: gpio@60 {
-		compatible = "ti,tpic2810";
-		reg = <0x60>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	pca9536: gpio@41 {
-		compatible = "ti,pca9536";
-		reg = <0x41>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&spi0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins_default>;
-
-	sn65hvs882@1 {
-		compatible = "pisosr-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		load-gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
-
-		reg = <1>;
-		spi-max-frequency = <1000000>;
-		spi-cpol;
-	};
-
-	spi_nor: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "winbond,w25q64", "jedec,spi-nor";
-		spi-max-frequency = <80000000>;
-		m25p,fast-read;
-		reg = <0>;
-
-		partition@0 {
-			label = "u-boot-spl";
-			reg = <0x0 0x80000>;
-			read-only;
-		};
-
-		partition@1 {
-			label = "u-boot";
-			reg = <0x80000 0x100000>;
-			read-only;
-		};
-
-		partition@2 {
-			label = "u-boot-env";
-			reg = <0x180000 0x20000>;
-			read-only;
-		};
-
-		partition@3 {
-			label = "misc";
-			reg = <0x1A0000 0x660000>;
-		};
-	};
-
-};
-
-&tscadc {
-	status = "okay";
-	adc {
-		ti,adc-channels = <1 2 3 4 5 6 7>;
-	};
-};
-
-#include "tps65910.dtsi"
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1326000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1144000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmc_reg>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_default>;
-};
-
-&gpio0 {
-	/* Do not idle the GPIO used for holding the VTT regulator */
-	ti,no-reset-on-init;
-	ti,no-idle-on-init;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins_default>;
-	status = "okay";
-};
-
-&gpio3 {
-	p4 {
-		gpio-hog;
-		gpios = <4 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "PR1_MII_CTRL";
-	};
-
-	p10 {
-		gpio-hog;
-		gpios = <10 GPIO_ACTIVE_HIGH>;
-		/* ETH1 mux: Low for MII-PRU, high for RMII-CPSW */
-		output-high;
-		line-name = "MUX_MII_CTL1";
-	};
-};
-
-&cpsw_emac0 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
-	phy-handle = <&ethphy1>;
-	phy-mode = "rmii";
-	dual_emac_res_vlan = <2>;
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-	dual_emac;
-};
-
-&phy_sel {
-	rmii-clock-ext;
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-	reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
-	reset-delay-us = <2>;   /* PHY datasheet states 1uS min */
-
-	ethphy0: ethernet-phy@1 {
-		reg = <1>;
-	};
-
-	ethphy1: ethernet-phy@3 {
-		reg = <3>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
deleted file mode 100644
index a5769a8f5fc8..000000000000
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ /dev/null
@@ -1,323 +0,0 @@
-/*
- * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
- *
- * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins>;
-
-		compatible = "gpio-leds";
-
-		led0 {
-			label = "com:green:user";
-			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
-
-	vbat: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	vmmc: fixedregulator1 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&am33xx_pinmux {
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	nandflash_pins: pinmux_nandflash_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
-			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	leds_pins: pinmux_leds_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
-		>;
-	};
-};
-
-&mac {
-	status = "okay";
-};
-
-&davinci_mdio {
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rmii";
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rmii";
-};
-
-&phy_sel {
-	rmii-clock-ext;
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins>;
-
-	ranges = <0 0 0x08000000 0x1000000>;	/* CS0: 16MB for NAND */
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-		nand-bus-width = <8>;
-		ti,nand-ecc-opt = "bch8";
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ti,elm-id = <&elm>;
-
-		/* MTD partition table */
-		partition@0 {
-			label = "SPL";
-			reg = <0x00000000 0x000080000>;
-		};
-
-		partition@1 {
-			label = "U-boot";
-			reg = <0x00080000 0x001e0000>;
-		};
-
-		partition@2 {
-			label = "U-Boot Env";
-			reg = <0x00260000 0x00020000>;
-		};
-
-		partition@3 {
-			label = "Kernel";
-			reg = <0x00280000 0x00500000>;
-		};
-
-		partition@4 {
-			label = "File System";
-			reg = <0x00780000 0x007880000>;
-		};
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	clock-frequency = <400000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmc>;
-	bus-width = <4>;
-};
-
-&uart0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-#include "tps65910.dtsi"
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-always-on;
-		};
-	};
-};
-
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
deleted file mode 100644
index 1d6c6fa703e4..000000000000
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * Copyright (C) 2014 NovaTech LLC - http://www.novatechweb.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-
-/ {
-	model = "NovaTech OrionLXm";
-	compatible = "novatech,am335x-lxm", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	/* Power supply provides a fixed 5V @2A */
-	vbat: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	/* Power supply provides a fixed 3.3V @3A */
-	vmmcsd_fixed: fixedregulator1 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-};
-
-&am33xx_pinmux {
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3 */
-			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2 */
-			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1 */
-			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0 */
-			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk */
-			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd */
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_int */
-			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_crs_dv */
-			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rxer */
-			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_txen */
-			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_td1 */
-			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_td0 */
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rd1 */
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rd0 */
-			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk */
-
-			/* Slave 2 */
-			AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_txen */
-			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_td1 */
-			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_td0 */
-			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rd1 */
-			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rd0 */
-			AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_crs_dv */
-			AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rxer */
-			AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_int */
-			AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii2_refclk */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_int */
-			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_crs_dv */
-			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rxer */
-			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_txen */
-			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_td1 */
-			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_td0 */
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rd1 */
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rd0 */
-			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_refclk */
-
-			/* Slave 2 reset value*/
-			AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_txen */
-			AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_td1 */
-			AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_td0 */
-			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rd1 */
-			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rd0 */
-			AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_crs_dv */
-			AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rxer */
-			AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_int */
-			AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_refclk */
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	emmc_pins: pinmux_emmc_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
-			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
-			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
-			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	serial_config1: serial_config1@20 {
-		compatible = "nxp,pca9539";
-		reg = <0x20>;
-	};
-
-	serial_config2: serial_config2@21 {
-		compatible = "nxp,pca9539";
-		reg = <0x21>;
-	};
-
-	tps: tps@2d {
-		compatible = "ti,tps65910";
-		reg = <0x2d>;
-	};
-};
-
-/include/ "tps65910.dtsi"
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		/* vrtc - unused */
-
-		vio_reg: regulator@1 {
-			regulator-name = "vio_1v5,ddr";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			regulator-name = "vdd1,mpu";
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			regulator-name = "vdd2_1v1,core";
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1100000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		/* vdd3 - unused */
-
-		/* vdig1 - unused */
-
-		vdig2_reg: regulator@6 {
-			regulator-name = "vdig2_1v8,vdds_pll";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		/* vpll - unused */
-
-		vdac_reg: regulator@8 {
-			regulator-name = "vdac_1v8,vdds";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-name = "vaux1_1v8,usb";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-name = "vaux2_3v3,io";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-name = "vaux33_3v3,usb";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-name = "vmmc_3v3,io";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <5>;
-	phy-mode = "rmii";
-	dual_emac_res_vlan = <2>;
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <4>;
-	phy-mode = "rmii";
-	dual_emac_res_vlan = <3>;
-};
-
-&phy_sel {
-	rmii-clock-ext;
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	dual_emac = <1>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_pins>;
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <8>;
-	ti,non-removable;
-	status = "okay";
-};
-
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
deleted file mode 100644
index 946d7069f417..000000000000
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ /dev/null
@@ -1,469 +0,0 @@
-/*
- * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-
-/ {
-	model = "Newflow AM335x NanoBone";
-	compatible = "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led0 {
-			label = "nanobone:green:usr1";
-			gpios = <&gpio1 5 0>;
-			default-state = "off";
-		};
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&misc_pins>;
-
-	misc_pins: misc_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7)	/* spi0_cs0.gpio0_5 */
-		>;
-	};
-
-	gpmc_pins: gpmc_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad8.gpmc_ad8 */
-			AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad9.gpmc_ad9 */
-			AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad10.gpmc_ad10 */
-			AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad11.gpmc_ad11 */
-			AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad12.gpmc_ad12 */
-			AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad13.gpmc_ad13 */
-			AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad14.gpmc_ad14 */
-			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad15.gpmc_ad15 */
-
-			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
-			AM33XX_IOPAD(0x880, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn1.gpmc_csn1 */
-			AM33XX_IOPAD(0x884, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn2.gpmc_csn2 */
-			AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn3.gpmc_csn3 */
-
-			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_ben0_cle.gpmc_ben0_cle */
-
-			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE1)		/* lcd_data1.gpmc_a1 */
-			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE1)		/* lcd_data2.gpmc_a2 */
-			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE1)		/* lcd_data3.gpmc_a3 */
-			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE1)		/* lcd_data4.gpmc_a4 */
-			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE1)		/* lcd_data5.gpmc_a5 */
-			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE1)		/* lcd_data6.gpmc_a6 */
-			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE1)		/* lcd_data7.gpmc_a7 */
-
-			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE1)		/* lcd_vsync.gpmc_a8 */
-			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE1)		/* lcd_hsync.gpmc_a9 */
-			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE1)		/* lcd_pclk.gpmc_a10 */
-		>;
-	};
-
-	i2c0_pins: i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	uart0_pins: uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0)		/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	uart1_pins: uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE7)		/* uart1_ctsn.uart1_ctsn */
-			AM33XX_IOPAD(0x97c, PIN_OUTPUT | MUX_MODE7)		/* uart1_rtsn.uart1_rtsn */
-			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0)		/* uart1_txd.uart1_txd */
-		>;
-	};
-
-	uart2_pins: uart2_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x8c0, PIN_INPUT_PULLUP | MUX_MODE7)	/* lcd_data8.gpio2[14] */
-			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7)		/* lcd_data9.gpio2[15] */
-			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)		/* spi0_sclk.uart2_rxd */
-			AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)		/* spi0_d0.uart2_txd */
-		>;
-	};
-
-	uart3_pins: uart3_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x8c8, PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data10.uart3_ctsn */
-			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE6)		/* lcd_data11.uart3_rtsn */
-			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE1)		/* spi0_cs1.uart3_rxd */
-			AM33XX_IOPAD(0x964, PIN_OUTPUT | MUX_MODE1)		/* ecap0_in_pwm0_out.uart3_txd */
-		>;
-	};
-
-	uart4_pins: uart4_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x8d0, PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data12.uart4_ctsn */
-			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE6)		/* lcd_data13.uart4_rtsn */
-			AM33XX_IOPAD(0x968, PIN_INPUT | MUX_MODE1)		/* uart0_ctsn.uart4_rxd */
-			AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE1)		/* uart0_rtsn.uart4_txd */
-		>;
-	};
-
-	uart5_pins: uart5_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x8d8, PIN_INPUT | MUX_MODE4)		/* lcd_data14.uart5_rxd */
-			AM33XX_IOPAD(0x944, PIN_OUTPUT | MUX_MODE3)		/* rmiii1_refclk.uart5_txd */
-		>;
-	};
-
-	mmc1_pins: mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
-			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
-			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
-			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
-			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
-			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
-			AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7)	/* emu1.gpio3[8] */
-			AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7)	/* mcasp0_aclkr.gpio3[18] */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	status = "okay";
-	rts-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-	rs485-rts-active-high;
-	rs485-rx-during-tx;
-	rs485-rts-delay = <1 1>;
-	linux,rs485-enabled-at-boot-time;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	status = "okay";
-	rts-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
-	rs485-rts-active-high;
-	rs485-rts-delay = <1 1>;
-	linux,rs485-enabled-at-boot-time;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart5_pins>;
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	gpio@20 {
-		compatible = "microchip,mcp23017";
-		gpio-controller;
-		#gpio-cells = <2>;
-		reg = <0x20>;
-	};
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-
-	eeprom@53 {
-		compatible = "microchip,24c02", "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <8>;
-	};
-
-	rtc@68 {
-		compatible = "dallas,ds1307";
-		reg = <0x68>;
-	};
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	compatible = "ti,am3352-gpmc";
-	ti,hwmods = "gpmc";
-	status = "okay";
-	gpmc,num-waitpins = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpmc_pins>;
-
-	#address-cells = <2>;
-	#size-cells = <1>;
-	ranges = <0 0 0x08000000 0x08000000>,	/* CS0: NOR 128M */
-		 <1 0 0x1c000000 0x01000000>;	/* CS1: FRAM 16M */
-
-	nor@0,0 {
-		reg = <0 0x00000000 0x08000000>;
-		compatible = "cfi-flash";
-		linux,mtd-name = "spansion,s29gl010p11t";
-		bank-width = <2>;
-
-		gpmc,mux-add-data = <2>;
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <160>;
-		gpmc,cs-wr-off-ns = <160>;
-		gpmc,adv-on-ns = <10>;
-		gpmc,adv-rd-off-ns = <30>;
-		gpmc,adv-wr-off-ns = <30>;
-		gpmc,oe-on-ns = <40>;
-		gpmc,oe-off-ns = <160>;
-		gpmc,we-on-ns = <40>;
-		gpmc,we-off-ns = <160>;
-		gpmc,rd-cycle-ns = <160>;
-		gpmc,wr-cycle-ns = <160>;
-		gpmc,access-ns = <150>;
-		gpmc,page-burst-access-ns = <10>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-delay-ns = <20>;
-		gpmc,wr-data-mux-bus-ns = <70>;
-		gpmc,wr-access-ns = <80>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/*
-		MTD partition table
-		===================
-		+------------+-->0x00000000-> U-Boot start
-		|            |
-		|            |-->0x000BFFFF-> U-Boot end
-		|            |-->0x000C0000-> ENV1 start
-		|            |
-		|            |-->0x000DFFFF-> ENV1 end
-		|            |-->0x000E0000-> ENV2 start
-		|            |
-		|            |-->0x000FFFFF-> ENV2 end
-		|            |-->0x00100000-> Kernel start
-		|            |
-		|            |-->0x004FFFFF-> Kernel end
-		|            |-->0x00500000-> File system start
-		|            |
-		|            |-->0x01FFFFFF-> File system end
-		|            |-->0x02000000-> User data start
-		|            |
-		|            |-->0x03FFFFFF-> User data end
-		|            |-->0x04000000-> Data storage start
-		|            |
-		+------------+-->0x08000000-> NOR end (Free end)
-		*/
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x000c0000>; /* 768KB */
-		};
-
-		partition@1 {
-			label = "env1";
-			reg = <0x000c0000 0x00020000>; /* 128KB */
-		};
-
-		partition@2 {
-			label = "env2";
-			reg = <0x000e0000 0x00020000>; /* 128KB */
-		};
-
-		partition@3 {
-			label = "kernel";
-			reg = <0x00100000 0x00400000>; /* 4MB */
-		};
-
-		partition@4 {
-			label = "rootfs";
-			reg = <0x00500000 0x01b00000>; /* 27MB */
-		};
-
-		partition@5 {
-			label = "user";
-			reg = <0x02000000 0x02000000>; /* 32MB */
-		};
-
-		partition@6 {
-			label = "data";
-			reg = <0x04000000 0x04000000>; /* 64MB */
-		};
-	};
-
-	fram@1,0 {
-		reg = <1 0x00000000 0x01000000>;
-		bank-width = <2>;
-
-		gpmc,mux-add-data = <2>;
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <160>;
-		gpmc,cs-wr-off-ns = <160>;
-		gpmc,adv-on-ns = <10>;
-		gpmc,adv-rd-off-ns = <20>;
-		gpmc,adv-wr-off-ns = <20>;
-		gpmc,oe-on-ns = <30>;
-		gpmc,oe-off-ns = <150>;
-		gpmc,we-on-ns = <30>;
-		gpmc,we-off-ns = <150>;
-		gpmc,rd-cycle-ns = <160>;
-		gpmc,wr-cycle-ns = <160>;
-		gpmc,access-ns = <130>;
-		gpmc,page-burst-access-ns = <10>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-		gpmc,cycle2cycle-delay-ns = <10>;
-		gpmc,wr-data-mux-bus-ns = <30>;
-		gpmc,wr-access-ns = <0>;
-	};
-};
-
-&mac {
-	dual_emac;
-	status = "okay";
-};
-
-&davinci_mdio {
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "mii";
-	dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "mii";
-	dual_emac_res_vlan = <2>;
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&ldo4_reg>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	bus-width = <4>;
-	cd-gpios = <&gpio3 8 0>;
-	wp-gpios = <&gpio3 18 0>;
-};
-
-#include "tps65217.dtsi"
-
-&tps {
-	regulators {
-		dcdc1_reg: regulator@0 {
-			/* +1.5V voltage with ±4% tolerance */
-			regulator-min-microvolt = <1450000>;
-			regulator-max-microvolt = <1550000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <915000>;
-			regulator-max-microvolt = <1140000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <915000>;
-			regulator-max-microvolt = <1140000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			/* +1.8V voltage with ±4% tolerance */
-			regulator-min-microvolt = <1750000>;
-			regulator-max-microvolt = <1870000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			/* +3.3V voltage with ±4% tolerance */
-			regulator-min-microvolt = <3175000>;
-			regulator-max-microvolt = <3430000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			/* +1.8V voltage with ±4% tolerance */
-			regulator-min-microvolt = <1750000>;
-			regulator-max-microvolt = <1870000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			/* +3.3V voltage with ±4% tolerance */
-			regulator-min-microvolt = <3175000>;
-			regulator-max-microvolt = <3430000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi
deleted file mode 100644
index 1ec8e0d80191..000000000000
--- a/arch/arm/boot/dts/am335x-pcm-953.dtsi
+++ /dev/null
@@ -1,288 +0,0 @@
-/*
- * Copyright (C) 2014-2017 Phytec Messtechnik GmbH
- * Author: Wadim Egorov <w.egorov@phytec.de>
- *	   Teresa Remmet <t.remmet@phytec.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Phytec AM335x PCM-953";
-	compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx";
-
-	/* Power */
-	regulators {
-		vcc3v3: fixedregulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "vcc3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-		};
-
-		vcc1v8: fixedregulator@2 {
-			compatible = "regulator-fixed";
-			regulator-name = "vcc1v8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
-	};
-
-	/* User IO */
-	user_leds: user_leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_pins>;
-
-		green {
-			label = "green:user";
-			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
-			default-state = "on";
-		};
-
-		yellow {
-			label = "yellow:user";
-			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "gpio";
-			default-state = "on";
-		};
-	};
-
-	user_buttons: user_buttons {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_buttons_pins>;
-
-		button@0 {
-			label = "home";
-			linux,code = <KEY_HOME>;
-			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
-			wakeup-source;
-		};
-
-		button@1 {
-			label = "menu";
-			linux,code = <KEY_MENU>;
-			gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
-			wakeup-source;
-		};
-
-	};
-};
-
-&am33xx_pinmux {
-	user_buttons_pins: pinmux_user_buttons {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* emu0.gpio3_7 */
-			AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* emu1.gpio3_8 */
-		>;
-	};
-
-	user_leds_pins: pinmux_user_leds {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x880, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn1.gpio1_30 */
-			AM33XX_IOPAD(0x884, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn2.gpio1_31 */
-		>;
-	};
-};
-
-/* CAN */
-&am33xx_pinmux {
-	dcan1_pins: pinmux_dcan1 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x980, PIN_OUTPUT_PULLUP | MUX_MODE2)	/* uart1_rxd.dcan1_tx_mux2 */
-			AM33XX_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_txd.dcan1_rx_mux2 */
-		>;
-	};
-};
-
-&dcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan1_pins>;
-	status = "okay";
-};
-
-/* Ethernet */
-&am33xx_pinmux {
-	ethernet1_pins: pinmux_ethernet1 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
-			AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
-			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
-		>;
-	};
-};
-
-&cpsw_emac1 {
-	phy-handle = <&phy1>;
-	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	phy1: ethernet-phy@2 {
-		reg = <2>;
-
-		/* Register 260 (104h) – RGMII Clock and Control Pad Skew */
-		rxc-skew-ps = <1400>;
-		rxdv-skew-ps = <0>;
-		txc-skew-ps = <1400>;
-		txen-skew-ps = <0>;
-		/* Register 261 (105h) – RGMII RX Data Pad Skew */
-		rxd3-skew-ps = <0>;
-		rxd2-skew-ps = <0>;
-		rxd1-skew-ps = <0>;
-		rxd0-skew-ps = <0>;
-		/* Register 262 (106h) – RGMII TX Data Pad Skew */
-		txd3-skew-ps = <0>;
-		txd2-skew-ps = <0>;
-		txd1-skew-ps = <0>;
-		txd0-skew-ps = <0>;
-	};
-};
-
-&mac {
-	slaves = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
-	dual_emac;
-};
-
-/* Misc */
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cb_gpio_pins>;
-
-	cb_gpio_pins: pinmux_cb_gpio {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x968, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart0_ctsn.gpio1_8 */
-			AM33XX_IOPAD(0x96c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart0_rtsn.gpio1_9 */
-		>;
-	};
-};
-
-/* MMC */
-&am33xx_pinmux {
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
-			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
-			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
-			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
-			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
-			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
-			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE7)	/* spi0_cs1.mmc0_sdcd */
-		>;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&vcc3v3>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-/* UARTs */
-&am33xx_pinmux {
-	uart0_pins: pinmux_uart0 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
-			AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0)		/* uart1_ctsn.uart1_ctsn */
-			AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_tx_clk.uart2_rxd */
-			AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_rx_clk.uart2_txd */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd3.uart3_rxd */
-			AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd2.uart3_txd */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-	status = "okay";
-};
-
-/* USB */
-&cppi41dma {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&usb1_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
deleted file mode 100644
index 03c7d77023c6..000000000000
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ /dev/null
@@ -1,656 +0,0 @@
-/*
- * Copyright (C) 2014 Gumstix, Inc. - https://www.gumstix.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "am33xx.dtsi"
-
-/ {
-	model = "Gumstix Pepper";
-	compatible = "gumstix,am335x-pepper", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc3_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	buttons: user_buttons {
-		compatible = "gpio-keys";
-	};
-
-	leds: user_leds {
-		compatible = "gpio-leds";
-	};
-
-	panel: lcd_panel {
-		compatible = "ti,tilcdc,panel";
-	};
-
-	sound: sound_iface {
-		compatible = "ti,da830-evm-audio";
-	};
-
-	vbat: fixedregulator0 {
-		compatible = "regulator-fixed";
-	};
-
-	v3v3c_reg: fixedregulator1 {
-		compatible = "regulator-fixed";
-	};
-
-	vdd5_reg: fixedregulator2 {
-		compatible = "regulator-fixed";
-	};
-};
-
-/* I2C Busses */
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	clock-frequency = <400000>;
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-	};
-
-	audio_codec: tlv320aic3106@1b {
-		compatible = "ti,tlv320aic3106";
-		reg = <0x1b>;
-		ai3x-micbias-vg = <0x2>;
-	};
-
-	accel: lis331dlh@1d {
-		compatible = "st,lis3lv02d";
-		reg = <0x1d>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <400000>;
-};
-
-&am33xx_pinmux {
-	i2c0_pins: pinmux_i2c0 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-	i2c1_pins: pinmux_i2c1 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x90C, PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_crs,i2c1_sda */
-			AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_rxerr,i2c1_scl */
-		>;
-	};
-};
-
-/* Accelerometer */
-&accel {
-	pinctrl-names = "default";
-	pinctrl-0 = <&accel_pins>;
-
-	Vdd-supply = <&ldo3_reg>;
-	Vdd_IO-supply = <&ldo3_reg>;
-	st,irq1-click;
-	st,wakeup-x-lo;
-	st,wakeup-x-hi;
-	st,wakeup-y-lo;
-	st,wakeup-y-hi;
-	st,wakeup-z-lo;
-	st,wakeup-z-hi;
-	st,min-limit-x = <92>;
-	st,max-limit-x = <14>;
-	st,min-limit-y = <14>;
-	st,max-limit-y = <92>;
-	st,min-limit-z = <92>;
-	st,max-limit-z = <14>;
-};
-
-&am33xx_pinmux {
-	accel_pins: pinmux_accel {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x898, PIN_INPUT | MUX_MODE7)   /* gpmc_wen.gpio2_4 */
-		>;
-	};
-};
-
-/* Audio */
-&audio_codec {
-	status = "okay";
-
-	gpio-reset = <&gpio1 16 GPIO_ACTIVE_LOW>;
-	AVDD-supply = <&ldo3_reg>;
-	IOVDD-supply = <&ldo3_reg>;
-	DRVDD-supply = <&ldo3_reg>;
-	DVDD-supply = <&dcdc1_reg>;
-};
-
-&sound {
-	ti,model = "AM335x-EVM";
-	ti,audio-codec = <&audio_codec>;
-	ti,mcasp-controller = <&mcasp0>;
-	ti,codec-clock-rate = <12000000>;
-	ti,audio-routing =
-		"Headphone Jack",	"HPLOUT",
-		"Headphone Jack",	"HPROUT",
-		"MIC3L",		"Mic3L Switch";
-};
-
-&mcasp0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&audio_pins>;
-
-	op-mode = <0>;	/* MCASP_ISS_MODE */
-	tdm-slots = <2>;
-	serial-dir = <
-		1 2 0 0
-		0 0 0 0
-		0 0 0 0
-		0 0 0 0
-	>;
-	tx-num-evt = <1>;
-	rx-num-evt = <1>;
-};
-
-&am33xx_pinmux {
-	audio_pins: pinmux_audio {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_ahcklx.mcasp0_ahclkx */
-			AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_fsx.mcasp0_fsx */
-			AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_aclkx.mcasp0_aclkx */
-			AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr0.mcasp0_axr0 */
-			AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr1.mcasp0_axr1 */
-			AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a0.gpio1_16 */
-		>;
-	};
-};
-
-/* Display: 24-bit LCD Screen */
-&panel {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcd_pins>;
-	panel-info {
-		ac-bias = <255>;
-		ac-bias-intrpt = <0>;
-		dma-burst-sz = <16>;
-		bpp = <32>;
-		fdd = <0x80>;
-		sync-edge = <0>;
-		sync-ctrl = <1>;
-		raster-order = <0>;
-		fifo-th = <0>;
-	};
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: 480x272 {
-			clock-frequency = <18400000>;
-			hactive = <480>;
-			vactive = <272>;
-			hfront-porch = <8>;
-			hback-porch = <4>;
-			hsync-len = <41>;
-			vfront-porch = <4>;
-			vback-porch = <2>;
-			vsync-len = <10>;
-			hsync-active = <1>;
-			vsync-active = <1>;
-		};
-	};
-};
-
-&lcdc {
-	status = "okay";
-};
-
-&am33xx_pinmux {
-	lcd_pins: pinmux_lcd {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
-			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
-			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
-			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
-			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
-			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
-			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
-			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
-			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
-			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
-			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
-			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
-			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
-			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
-			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
-			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
-			AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data16 */
-			AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data17 */
-			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data18 */
-			AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data19 */
-			AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data20 */
-			AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data21 */
-			AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data22 */
-			AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data23 */
-			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
-			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
-			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
-			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
-			/* Display Enable */
-			AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
-		>;
-	};
-};
-
-/* Ethernet */
-&cpsw_emac0 {
-	status = "okay";
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii";
-};
-
-&cpsw_emac1 {
-	status = "okay";
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rgmii";
-};
-
-&davinci_mdio {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-};
-
-&mac {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ethernet_pins>;
-};
-
-
-&am33xx_pinmux {
-	ethernet_pins: pinmux_ethernet {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd3.rgmii1_rxd3 */
-			AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd2.rgmii1_rxd2 */
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
-			/* ethernet interrupt */
-			AM33XX_IOPAD(0x944, PIN_INPUT_PULLUP | MUX_MODE7)	/* rmii2_refclk.gpio0_29 */
-			/* ethernet PHY nReset */
-			AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* mii1_col.gpio3_0 */
-		>;
-	};
-
-	mdio_pins: pinmux_mdio {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-};
-
-/* MMC */
-&mmc1 {
-	/* Bootable SD card slot */
-	status = "okay";
-	vmmc-supply = <&ldo3_reg>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
-
-&mmc2 {
-	/* eMMC (not populated) on MMC #2 */
-	status = "disabled";
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_pins>;
-	vmmc-supply = <&ldo3_reg>;
-	bus-width = <8>;
-	ti,non-removable;
-};
-
-&mmc3 {
-	/* Wifi & Bluetooth on MMC #3 */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&wireless_pins>;
-	vmmmc-supply = <&v3v3c_reg>;
-	bus-width = <4>;
-	ti,non-removable;
-	dmas = <&edma_xbar 12 0 1
-		&edma_xbar 13 0 2>;
-	dma-names = "tx", "rx";
-};
-
-
-&am33xx_pinmux {
-	sd_pins: pinmux_sd_card {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
-			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
-			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
-			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
-			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
-			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
-			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)		/* spi0_cs1.gpio0_6 */
-		>;
-	};
-	emmc_pins: pinmux_emmc {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
-			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
-			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
-			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
-			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
-			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
-			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
-			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad5.mmc1_dat5 */
-			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
-			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
-			/* EMMC nReset */
-			AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
-		>;
-	};
-	wireless_pins: pinmux_wireless {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0 */
-			AM33XX_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1 */
-			AM33XX_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2 */
-			AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3 */
-			AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd */
-			AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc1_clk */
-			/* WLAN nReset */
-			AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
-			/* WLAN nPower down */
-			AM33XX_IOPAD(0x870, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
-			/* 32kHz Clock */
-			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-		>;
-	};
-};
-
-/* Power */
-&vbat {
-	regulator-name = "vbat";
-	regulator-min-microvolt = <5000000>;
-	regulator-max-microvolt = <5000000>;
-};
-
-&v3v3c_reg {
-	regulator-name = "v3v3c_reg";
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	vin-supply = <&vbat>;
-};
-
-&vdd5_reg {
-	regulator-name = "vdd5_reg";
-	regulator-min-microvolt = <5000000>;
-	regulator-max-microvolt = <5000000>;
-	vin-supply = <&vbat>;
-};
-
-/include/ "tps65217.dtsi"
-
-&tps {
-	backlight {
-		isel = <1>; /* ISET1 */
-		fdim = <200>; /* TPS65217_BL_FDIM_200HZ */
-		default-brightness = <80>;
-	};
-
-	regulators {
-		dcdc1_reg: regulator@0 {
-			/* VDD_1V8 system supply */
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			/* VRTC 1.8V always-on supply */
-			regulator-name = "vrtc,vdds";
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			/* 3.3V rail */
-			regulator-name = "vdd_3v3aux";
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			/* VDD_3V3A 3.3V rail */
-			regulator-name = "vdd_3v3a";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		ldo4_reg: regulator@6 {
-			/* VDD_3V3B 3.3V rail */
-			regulator-name = "vdd_3v3b";
-			regulator-always-on;
-		};
-	};
-};
-
-/* SPI Busses */
-&spi0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-};
-
-&am33xx_pinmux {
-	spi0_pins: pinmux_spi0 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
-			AM33XX_IOPAD(0x95C, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
-			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
-			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
-		>;
-	};
-};
-
-/* Touch Screen */
-&tscadc {
-	status = "okay";
-	tsc {
-		ti,wires = <4>;
-		ti,x-plate-resistance = <200>;
-		ti,coordinate-readouts = <5>;
-		ti,wire-config = <0x00 0x11 0x22 0x33>;
-	};
-
-	adc {
-		ti,adc-channels = <4 5 6 7>;
-	};
-};
-
-/* UARTs */
-&uart0 {
-	/* Serial Console */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-};
-
-&uart1 {
-	/* Broken out to J6 header */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&am33xx_pinmux {
-	uart0_pins: pinmux_uart0 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-	uart1_pins: pinmux_uart1 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_ctsn.uart1_ctsn */
-			AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
-			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
-		>;
-	};
-};
-
-/* USB */
-&usb {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb_pins>;
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-        dr_mode = "host";
-};
-
-&usb1 {
-	status = "okay";
-        dr_mode = "host";
-};
-
-&cppi41dma {
-	status = "okay";
-};
-
-&am33xx_pinmux {
-	usb_pins: pinmux_usb {
-		pinctrl-single,pins = <
-			/* USB0 Over-Current (active low) */
-			AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
-			/* USB1 Over-Current (active low) */
-			AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
-		>;
-	};
-};
-
-/* User IO */
-&leds {
-	pinctrl-names = "default";
-	pinctrl-0 = <&user_leds_pins>;
-
-	led0 {
-		label = "pepper:user0:blue";
-		gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
-		linux,default-trigger = "none";
-		default-state = "off";
-	};
-
-	led1 {
-		label = "pepper:user1:red";
-		gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-		linux,default-trigger = "none";
-		default-state = "off";
-	};
-};
-
-&buttons {
-	pinctrl-names = "default";
-	pinctrl-0 = <&user_buttons_pins>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	button0 {
-		label = "home";
-		linux,code = <KEY_HOME>;
-		gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
-		wakeup-source;
-	};
-
-	button1 {
-		label = "menu";
-		linux,code = <KEY_MENU>;
-		gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-		wakeup-source;
-	};
-
-	buttons2 {
-		label = "power";
-		linux,code = <KEY_POWER>;
-		gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-		wakeup-source;
-	};
-};
-
-&am33xx_pinmux {
-	user_leds_pins: pinmux_user_leds {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a4.gpio1_20 */
-			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-		>;
-	};
-
-	user_buttons_pins: pinmux_user_buttons {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x858, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			AM33XX_IOPAD(0x85C, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a7.gpio1_21 */
-			AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio0_7 */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-phycore-rdk.dts b/arch/arm/boot/dts/am335x-phycore-rdk.dts
deleted file mode 100644
index 305f0b35d6ea..000000000000
--- a/arch/arm/boot/dts/am335x-phycore-rdk.dts
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2014 PHYTEC Messtechnik GmbH
- * Author: Wadim Egorov <w.egorov@phytec.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "am335x-phycore-som.dtsi"
-#include "am335x-pcm-953.dtsi"
-
-/* SoM */
-&i2c_eeprom {
-	status = "okay";
-};
-
-&i2c_rtc {
-	status = "okay";
-};
-
-&serial_flash {
-	status = "okay";
-
-};
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
deleted file mode 100644
index 428a25e952b0..000000000000
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ /dev/null
@@ -1,325 +0,0 @@
-/*
- * Copyright (C) 2015 Phytec Messtechnik GmbH
- * Author: Teresa Remmet <t.remmet@phytec.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "am33xx.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "Phytec AM335x phyCORE";
-	compatible = "phytec,am335x-phycore-som", "ti,am33xx";
-
-	aliases {
-		rtc0 = &i2c_rtc;
-		rtc1 = &rtc;
-	};
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		vcc5v: fixedregulator0 {
-			compatible = "regulator-fixed";
-			regulator-name = "vcc5v";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-};
-
-/* Crypto Module */
-&aes {
-	status = "okay";
-};
-
-&sham {
-	status = "okay";
-};
-
-/* Ethernet */
-&am33xx_pinmux {
-	ethernet0_pins: pinmux_ethernet0 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs_dv */
-			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
-			AM33XX_IOPAD(0x914, PIN_OUTPUT | MUX_MODE1)		/* mii1_txen.rmii1_txen */
-			AM33XX_IOPAD(0x924, PIN_OUTPUT | MUX_MODE1)		/* mii1_txd1.rmii1_txd1 */
-			AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE1)		/* mii1_txd0.rmii1_txd0 */
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
-			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
-		>;
-	};
-
-	mdio_pins: pinmux_mdio {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-};
-
-&cpsw_emac0 {
-	phy-handle = <&phy0>;
-	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
-};
-
-&davinci_mdio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-	status = "okay";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&mac {
-	slaves = <1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&ethernet0_pins>;
-	status = "okay";
-};
-
-&phy_sel {
-	rmii-clock-ext;
-};
-
-/* I2C Busses */
-&am33xx_pinmux {
-	i2c0_pins: pinmux_i2c0 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	tps: pmic@2d {
-		reg = <0x2d>;
-	};
-
-	i2c_tmp102: temp@4b {
-		compatible = "ti,tmp102";
-		reg = <0x4b>;
-		status = "disabled";
-	};
-
-	i2c_eeprom: eeprom@52 {
-		compatible = "atmel,24c32";
-		pagesize = <32>;
-		reg = <0x52>;
-		status = "disabled";
-	};
-
-	i2c_rtc: rtc@68 {
-		compatible = "microcrystal,rv4162";
-		reg = <0x68>;
-		status = "disabled";
-	};
-};
-
-/* NAND memory */
-&am33xx_pinmux {
-		nandflash_pins: pinmux_nandflash {
-			pinctrl-single,pins = <
-			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
-			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-		>;
-	};
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins>;
-	ranges = <0 0 0x08000000 0x1000000>;   /* CS0: NAND */
-	nandflash: nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-		nand-bus-width = <8>;
-		ti,nand-ecc-opt = "bch8";
-		gpmc,device-nand = "true";
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <30>;
-		gpmc,cs-wr-off-ns = <30>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <30>;
-		gpmc,adv-wr-off-ns = <30>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <20>;
-		gpmc,oe-on-ns = <10>;
-		gpmc,oe-off-ns = <30>;
-		gpmc,access-ns = <30>;
-		gpmc,rd-cycle-ns = <30>;
-		gpmc,wr-cycle-ns = <30>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <50>;
-		gpmc,cycle2cycle-diffcsen;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <30>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		ti,elm-id = <&elm>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
-
-/* Power */
-#include "tps65910.dtsi"
-
-&tps {
-	vcc1-supply = <&vcc5v>;
-	vcc2-supply = <&vcc5v>;
-	vcc3-supply = <&vcc5v>;
-	vcc4-supply = <&vcc5v>;
-	vcc5-supply = <&vcc5v>;
-	vcc6-supply = <&vcc5v>;
-	vcc7-supply = <&vcc5v>;
-	vccio-supply = <&vcc5v>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.325V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1378000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-name = "vdig1_1p8v";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-/* SPI Busses */
-&am33xx_pinmux {
-	spi0_pins: pinmux_spi0 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* spi0_clk.spi0_clk */
-			AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* spi0_d0.spi0_d0 */
-			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_d1.spi0_d1 */
-			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_cs0.spi0_cs0 */
-		>;
-	};
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-	status = "okay";
-
-	serial_flash: m25p80@0 {
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <48000000>;
-		reg = <0x0>;
-		m25p,fast-read;
-		status = "disabled";
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-sbc-t335.dts b/arch/arm/boot/dts/am335x-sbc-t335.dts
deleted file mode 100644
index 917d7ccc9109..000000000000
--- a/arch/arm/boot/dts/am335x-sbc-t335.dts
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- * am335x-sbc-t335.dts - Device Tree file for Compulab SBC-T335
- *
- * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "am335x-cm-t335.dts"
-
-/ {
-	model = "CompuLab CM-T335 on SB-T335";
-	compatible = "compulab,sbc-t335", "compulab,cm-t335", "ti,am33xx";
-
-	/* DRM display driver */
-	panel {
-		compatible = "ti,tilcdc,panel";
-		status = "okay";
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&lcd_pins_default>;
-		pinctrl-1 = <&lcd_pins_sleep>;
-
-		panel-info {
-			ac-bias           = <255>;
-			ac-bias-intrpt    = <0>;
-			dma-burst-sz      = <16>;
-			bpp               = <32>;
-			fdd               = <0x80>;
-			sync-edge         = <0>;
-			sync-ctrl         = <1>;
-			raster-order      = <0>;
-			fifo-th           = <0>;
-		};
-		display-timings {
-			/* Timing selection performed by U-Boot */
-			timing0: lcd {/* 800x480p62 */
-				clock-frequency = <30000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <39>;
-				hback-porch = <39>;
-				hsync-len = <47>;
-				vback-porch = <29>;
-				vfront-porch = <13>;
-				vsync-len = <2>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-			timing1: dvi { /* 1024x768p60 */
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				hfront-porch = <24>;
-				hback-porch = <160>;
-				hsync-len = <136>;
-				vactive = <768>;
-				vfront-porch = <3>;
-				vback-porch = <29>;
-				vsync-len = <6>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-			};
-		};
-	};
-};
-
-&am33xx_pinmux {
-	/* Display */
-	lcd_pins_default: lcd_pins_default {
-		pinctrl-single,pins = <
-			/* gpmc_ad8.lcd_data23 */
-			AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)
-			/* gpmc_ad9.lcd_data22 */
-			AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)
-			/* gpmc_ad10.lcd_data21 */
-			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)
-			/* gpmc_ad11.lcd_data20 */
-			AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)
-			/* gpmc_ad12.lcd_data19 */
-			AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)
-			/* gpmc_ad13.lcd_data18 */
-			AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)
-			/* gpmc_ad14.lcd_data17 */
-			AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)
-			/* gpmc_ad15.lcd_data16 */
-			AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)
-			/* lcd_data0.lcd_data0 */
-			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)
-			/* lcd_data1.lcd_data1 */
-			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)
-			/* lcd_data2.lcd_data2 */
-			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)
-			/* lcd_data3.lcd_data3 */
-			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)
-			/* lcd_data4.lcd_data4 */
-			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)
-			/* lcd_data5.lcd_data5 */
-			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)
-			/* lcd_data6.lcd_data6 */
-			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)
-			/* lcd_data7.lcd_data7 */
-			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)
-			/* lcd_data8.lcd_data8 */
-			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)
-			/* lcd_data9.lcd_data9 */
-			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)
-			/* lcd_data10.lcd_data10 */
-			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)
-			/* lcd_data11.lcd_data11 */
-			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)
-			/* lcd_data12.lcd_data12 */
-			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)
-			/* lcd_data13.lcd_data13 */
-			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)
-			/* lcd_data14.lcd_data14 */
-			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)
-			/* lcd_data15.lcd_data15 */
-			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)
-			/* lcd_vsync.lcd_vsync */
-			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)
-			/* lcd_hsync.lcd_hsync */
-			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)
-			/* lcd_pclk.lcd_pclk */
-			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)
-			/* lcd_ac_bias_en.lcd_ac_bias_en */
-			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)
-		>;
-	};
-
-	lcd_pins_sleep: lcd_pins_sleep {
-		pinctrl-single,pins = <
-			/* gpmc_ad8.lcd_data23 */
-			AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			/* gpmc_ad9.lcd_data22 */
-			AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			/* gpmc_ad10.lcd_data21 */
-			AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			/* gpmc_ad11.lcd_data20 */
-			AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			/* gpmc_ad12.lcd_data19 */
-			AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			/* gpmc_ad13.lcd_data18 */
-			AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			/* gpmc_ad14.lcd_data17 */
-			AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			/* gpmc_ad15.lcd_data16 */
-			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			/* lcd_data0.lcd_data0 */
-			AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7)
-			/* lcd_data1.lcd_data1 */
-			AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7)
-			/* lcd_data2.lcd_data2 */
-			AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7)
-			/* lcd_data3.lcd_data3 */
-			AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7)
-			/* lcd_data4.lcd_data4 */
-			AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7)
-			/* lcd_data5.lcd_data5 */
-			AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7)
-			/* lcd_data6.lcd_data6 */
-			AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7)
-			/* lcd_data7.lcd_data7 */
-			AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7)
-			/* lcd_data8.lcd_data8 */
-			AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7)
-			/* lcd_data9.lcd_data9 */
-			AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7)
-			/* lcd_data10.lcd_data10 */
-			AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7)
-			/* lcd_data11.lcd_data11 */
-			AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7)
-			/* lcd_data12.lcd_data12 */
-			AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7)
-			/* lcd_data13.lcd_data13 */
-			AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7)
-			/* lcd_data14.lcd_data14 */
-			AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7)
-			/* lcd_data15.lcd_data15 */
-			AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7)
-			/* lcd_vsync.lcd_vsync */
-			AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			/* lcd_hsync.lcd_hsync */
-			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			/* lcd_pclk.lcd_pclk */
-			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			/* lcd_ac_bias_en.lcd_ac_bias_en */
-			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-};
-
-&i2c0 {
-	/* GPIO extender */
-	gpio_ext: pca9555@26 {
-		compatible = "nxp,pca9555";
-		pinctrl-names = "default";
-		gpio-controller;
-		#gpio-cells = <2>;
-		reg = <0x26>;
-		dvi_ena {
-			gpio-hog;
-			gpios = <13 GPIO_ACTIVE_HIGH>;
-			output-high;
-			line-name = "dvi-enable";
-		};
-		lcd_ena {
-			gpio-hog;
-			gpios = <11 GPIO_ACTIVE_HIGH>;
-			output-high;
-			line-name = "lcd-enable";
-		};
-	};
-};
-
-/* Display */
-&lcdc {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
deleted file mode 100644
index 4f6a286ea293..000000000000
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ /dev/null
@@ -1,577 +0,0 @@
-/*
- * support for the bosch am335x based shc c3 board
- *
- * Copyright, C) 2015 Heiko Schocher <hs@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Bosch SHC";
-	compatible = "ti,am335x-shc", "ti,am335x-bone", "ti,am33xx";
-
-	aliases {
-		mmcblk0 = &mmc1;
-		mmcblk1 = &mmc2;
-	};
-
-	cpus {
-		cpu@0 {
-			/*
-			 * To consider voltage drop between PMIC and SoC,
-			 * tolerance value is reduced to 2% from 4% and
-			 * voltage value is increased as a precaution.
-			 */
-			operating-points = <
-				/* kHz    uV */
-				594000  1225000
-				294000  1125000
-			>;
-			voltage-tolerance = <2>; /* 2 percentage */
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		back_button {
-			label = "Back Button";
-			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_BACK>;
-			debounce-interval = <1000>;
-			wakeup-source;
-		};
-
-		front_button {
-			label = "Front Button";
-			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_FRONT>;
-			debounce-interval = <1000>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
-
-		compatible = "gpio-leds";
-
-		led1 {
-			label = "shc:power:red";
-			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led2 {
-			label = "shc:power:bl";
-			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "timer";
-			default-state = "on";
-		};
-
-		led3 {
-			label = "shc:lan:red";
-			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led4 {
-			label = "shc:lan:bl";
-			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led5 {
-			label = "shc:cloud:red";
-			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led6 {
-			label = "shc:cloud:bl";
-			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	vmmcsd_fixed: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&aes {
-	status = "okay";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-
-	ethernetphy0: ethernet-phy@0 {
-		reg = <0>;
-		smsc,disable-energy-detect;
-	};
-};
-
-&epwmss1 {
-	status = "okay";
-
-	ehrpwm1: pwm@48302200 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&ehrpwm1_pins>;
-		status = "okay";
-	};
-};
-
-&gpio1 {
-	hmtc_rst {
-		gpio-hog;
-		gpios = <24 GPIO_ACTIVE_LOW>;
-		output-high;
-		line-name = "homematic_reset";
-	};
-
-	hmtc_prog {
-		gpio-hog;
-		gpios = <27 GPIO_ACTIVE_LOW>;
-		output-high;
-		line-name = "homematic_program";
-	};
-};
-
-&gpio3 {
-	zgb_rst {
-		gpio-hog;
-		gpios = <18 GPIO_ACTIVE_LOW>;
-		output-low;
-		line-name = "zigbee_reset";
-	};
-
-	zgb_boot {
-		gpio-hog;
-		gpios = <19 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "zigbee_boot";
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-
-	at24@50 {
-		compatible = "atmel,24c32";
-		pagesize = <32>;
-		reg = <0x50>;
-	};
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-	slaves = <1>;
-	cpsw_emac0: slave@4a100200  {
-		phy_id = <&davinci_mdio>, <0>;
-		phy-mode = "mii";
-		phy-handle = <&ethernetphy0>;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	bus-width = <0x4>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
-	max-frequency = <26000000>;
-	vmmc-supply = <&vmmcsd_fixed>;
-	status = "okay";
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_pins>;
-	bus-width = <8>;
-	max-frequency = <26000000>;
-	sd-uhs-sdr25;
-	vmmc-supply = <&vmmcsd_fixed>;
-	status = "okay";
-};
-
-&mmc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins>;
-	bus-width = <4>;
-	cap-power-off-card;
-	max-frequency = <26000000>;
-	sd-uhs-sdr25;
-	vmmc-supply = <&vmmcsd_fixed>;
-	status = "okay";
-};
-
-&rtc {
-	ti,no-init;
-};
-
-&sham {
-	status = "okay";
-};
-
-&tps {
-	compatible = "ti,tps65217";
-	ti,pmic-shutdown-controller;
-
-	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dcdc1_reg: regulator@0 {
-			reg = <0>;
-			regulator-name = "vdds_dpr";
-			regulator-compatible = "dcdc1";
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1450000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			reg = <1>;
-			/*
-			 * VDD_MPU voltage limits 0.95V - 1.26V with
-			 * +/-4% tolerance
-			 */
-			regulator-compatible = "dcdc2";
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1375000>;
-			regulator-boot-on;
-			regulator-always-on;
-			regulator-ramp-delay = <70000>;
-		};
-
-		dcdc3_reg: regulator@2 {
-			reg = <2>;
-			/*
-			 * VDD_CORE voltage limits 0.95V - 1.1V with
-			 * +/-4% tolerance
-			 */
-			regulator-name = "vdd_core";
-			regulator-compatible = "dcdc3";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1125000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			reg = <3>;
-			regulator-name = "vio,vrtc,vdds";
-			regulator-compatible = "ldo1";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			reg = <4>;
-			regulator-name = "vdd_3v3aux";
-			regulator-compatible = "ldo2";
-			regulator-min-microvolt = <900000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			reg = <5>;
-			regulator-name = "vdd_1v8";
-			regulator-compatible = "ldo3";
-			regulator-min-microvolt = <900000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			reg = <6>;
-			regulator-name = "vdd_3v3a";
-			regulator-compatible = "ldo4";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins>;
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&clkout2_pin>;
-
-	clkout2_pin: pinmux_clkout2_pin {
-		pinctrl-single,pins = <
-			/* xdma_event_intr1.clkout2 */
-			AM33XX_IOPAD(0x9b4, PIN_INPUT | MUX_MODE6)
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE0)
-			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
-			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE0)
-			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
-			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
-			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE0)
-			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE0)
-			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE0)
-			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE0)
-			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE0)
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE0)
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE0)
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* mdio_data.mdio_data */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
-			/* mdio_clk.mdio_clk */
-			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	ehrpwm1_pins: pinmux_ehrpwm1 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.gpio1_19 */
-		>;
-	};
-
-	emmc_pins: pinmux_emmc_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x880, PIN_INPUT | MUX_MODE2)
-			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)
-			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)
-			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)
-			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)
-			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)
-			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)
-			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1)
-			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)
-			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0)
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE5)
-		>;
-	};
-
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x830, PIN_INPUT | MUX_MODE3)
-			AM33XX_IOPAD(0x834, PIN_INPUT | MUX_MODE3)
-			AM33XX_IOPAD(0x838, PIN_INPUT | MUX_MODE3)
-			AM33XX_IOPAD(0x83c, PIN_INPUT | MUX_MODE3)
-			AM33XX_IOPAD(0x888, PIN_INPUT | MUX_MODE3)
-			AM33XX_IOPAD(0x88c, PIN_INPUT | MUX_MODE3)
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x968, PIN_INPUT_PULLDOWN | MUX_MODE0)
-			AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x970, PIN_INPUT_PULLDOWN | MUX_MODE0)
-			AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0)
-		>;
-	};
-
-	uart1_pins: pinmux_uart1 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0)
-			AM33XX_IOPAD(0x97C, PIN_OUTPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0)
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)
-			AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)
-		>;
-	};
-
-	uart4_pins: pinmux_uart4_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6)
-			AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE6)
-		>;
-	};
-
-	user_leds_s0: user_leds_s0 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x844, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLUP | MUX_MODE7)
-			AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x86c, PIN_INPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7)
-			AM33XX_IOPAD(0x87c, PIN_INPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x894, PIN_INPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x958, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLUP | MUX_MODE7)
-			AM33XX_IOPAD(0x9a0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE7)
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts
deleted file mode 100644
index 1bcc60424ecd..000000000000
--- a/arch/arm/boot/dts/am335x-sl50.dts
+++ /dev/null
@@ -1,549 +0,0 @@
-/*
- * Copyright (C) 2015 Toby Churchill - http://www.toby-churchill.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-
-/ {
-	model = "Toby Churchill SL50 Series";
-	compatible = "tcl,am335x-sl50", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		led0 {
-			label = "sl50:green:usr0";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led1 {
-			label = "sl50:red:usr1";
-			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led2 {
-			label = "sl50:green:usr2";
-			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led3 {
-			label = "sl50:red:usr3";
-			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	backlight0: disp0 {
-		compatible = "pwm-backlight";
-		pwms = <&ehrpwm1 0 500000 0>;
-		brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
-		default-brightness-level = <6>;
-	};
-
-	backlight1: disp1 {
-		compatible = "pwm-backlight";
-		pwms = <&ehrpwm1 1 500000 0>;
-		brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
-		default-brightness-level = <6>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* audio external oscillator */
-		tlv320aic3x_mclk: oscillator@0 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency  = <24576000>;	/* 24.576MHz */
-		};
-	};
-
-	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM335x-SL50";
-		ti,audio-codec = <&audio_codec>;
-		ti,mcasp-controller = <&mcasp0>;
-
-		clocks = <&tlv320aic3x_mclk>;
-		clock-names = "mclk";
-
-		ti,audio-routing =
-			"Headphone Jack",	"HPLOUT",
-			"Headphone Jack",	"HPROUT",
-			"LINE1R",               "Line In",
-			"LINE1L",		"Line In";
-	};
-
-	emmc_pwrseq: pwrseq@0 {
-		compatible = "mmc-pwrseq-emmc";
-		pinctrl-names = "default";
-		pinctrl-0 = <&emmc_pwrseq_pins>;
-		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-	};
-
-	vmmcsd_fixed: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lwb_pins>;
-
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
-			AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
-		>;
-	};
-
-	uart4_pins: pinmux_uart4_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6)	/* gpmc_wait0.uart4_rxd */
-			AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6)	/* gpmc_wpn.uart4_txd */
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
-			AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
-			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
-			AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
-			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
-			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
-			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
-			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
-			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
-			AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
-			AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
-			AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE7)		/* uart0_rtsn.gpio1_9 */
-		>;
-	};
-
-	emmc_pwrseq_pins: pinmux_emmc_pwrseq_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a4.gpio1_20 */
-		>;
-	};
-
-	emmc_pins: pinmux_emmc_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
-			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
-			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
-			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
-			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
-			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
-			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
-			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) 	/* gpmc_ad5.mmc1_dat5 */
-			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
-			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
-		>;
-	};
-
-	audio_pins: pinmux_audio_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_ahcklx.mcasp0_ahclkx */
-			AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_fsx.mcasp0_fsx */
-			AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_aclkx.mcasp0_aclkx */
-			AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr0.mcasp0_axr0 */
-			AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mcasp0_ahclkr.mcasp0_axr2 */
-		>;
-	};
-
-	ehrpwm1_pins: pinmux_ehrpwm1a_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE6)	/* gpmc_a2.ehrpwm1a */
-			AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6)	/* gpmc_a3.ehrpwm1b */
-		>;
-	};
-
-	spi0_pins: pinmux_spi0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0)	/* SPI0_MOSI - spi0_d0.spi0_d0 */
-			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)	/* SPI0_MISO - spi0_d1.spi0_d1 */
-			AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0)	/* SPI0_CLK  - spi0_clk.spi0_clk */
-			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0)	/* SPI0_CS0 (NBATTSS) - spi0_cs0.spi0_cs0 */
-			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE0)	/* SPI0_CS1 (FPGA_FLASH_NCS) - spi0_cs1.spi0_cs1 */
-		>;
-	};
-
-	lwb_pins: pinmux_lwb_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7)	/* SoundPA_en - mcasp0_fsr.gpio3_19 */
-			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7)	/* nKbdOnC - gpmc_ad10.gpio0_26 */
-			AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE7)	/* nKbdInt - gpmc_ad12.gpio1_12 */
-			AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE7)	/* nKbdReset - gpmc_ad13.gpio1_13 */
-			AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7)	/* nDispReset - gpmc_ad14.gpio1_14 */
-			AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7)	/* USB1_enPower - gpmc_a1.gpio1_17 */
-			/* PDI Bus - Battery system */
-			AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7)	/* nBattReset  gpmc_a0.gpio1_16 */
-			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7)	/* BattPDIData gpmc_ad15.gpio1_15 */
-		>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	clock-frequency = <400000>;
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-
-	bq32000: rtc@68 {
-		compatible = "ti,bq32000";
-		trickle-resistor-ohms = <1120>;
-		reg = <0x68>;
-	};
-
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-	};
-
-	gpio_exp: mcp23017@20 {
-		compatible = "microchip,mcp23017";
-		reg = <0x20>;
-	};
-
-};
-
-&i2c2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	clock-frequency = <400000>;
-
-	audio_codec: tlv320aic3106@1b {
-		status = "okay";
-		compatible = "ti,tlv320aic3106";
-		reg = <0x1b>;
-
-		AVDD-supply = <&ldo4_reg>;
-		IOVDD-supply = <&ldo4_reg>;
-		DRVDD-supply = <&ldo4_reg>;
-		DVDD-supply = <&ldo3_reg>;
-	};
-
-	/* Ambient Light Sensor */
-	als: isl29023@44 {
-		compatible = "isil,isl29023";
-		reg = <0x44>;
-	};
-};
-
-&rtc {
-	status = "disabled";
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "peripheral";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-&mmc1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	bus-width = <4>;
-	cd-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&vmmcsd_fixed>;
-};
-
-&mmc2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_pins>;
-	bus-width = <8>;
-	vmmc-supply = <&vmmcsd_fixed>;
-	mmc-pwrseq = <&emmc_pwrseq>;
-};
-
-&mcasp0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&audio_pins>;
-
-	op-mode = <0>;  /* MCASP_ISS_MODE */
-	tdm-slots = <2>;
-	serial-dir = <
-		2 0 1 0
-		0 0 0 0
-		0 0 0 0
-		0 0 0 0
-	>;
-	tx-num-evt = <1>;
-	rx-num-evt = <1>;
-};
-
-&uart0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-};
-
-&uart1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&uart4 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins>;
-};
-
-&spi0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-
-	flash: n25q032@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q032";
-		reg = <1>;
-		spi-max-frequency = <5000000>;
-	};
-};
-
-#include "tps65217.dtsi"
-
-&tps {
-	ti,pmic-shutdown-controller;
-
-	interrupt-parent = <&intc>;
-	interrupts = <7>;	/* NNMI */
-
-	regulators {
-		dcdc1_reg: regulator@0 {
-			/* VDDS_DDR */
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			/* VRTC / VIO / VDDS*/
-			regulator-always-on;
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		ldo2_reg: regulator@4 {
-			/* VDD_3V3AUX */
-			regulator-always-on;
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		ldo3_reg: regulator@5 {
-			/* VDD_1V8 */
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			/* VDD_3V3A */
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "mii";
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "mii";
-};
-
-&mac {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-};
-
-&davinci_mdio {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
-
-&epwmss1 {
-	status = "okay";
-};
-
-&ehrpwm1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ehrpwm1_pins>;
-};
diff --git a/arch/arm/boot/dts/am335x-wega-rdk.dts b/arch/arm/boot/dts/am335x-wega-rdk.dts
deleted file mode 100644
index 6431b7db8109..000000000000
--- a/arch/arm/boot/dts/am335x-wega-rdk.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2015 Phytec Messtechnik GmbH
- * Author: Teresa Remmet <t.remmet@phytec.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "am335x-phycore-som.dtsi"
-#include "am335x-wega.dtsi"
-
-/* SoM */
-&i2c_eeprom {
-	status = "okay";
-};
-
-&i2c_rtc {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
deleted file mode 100644
index 8ce541739b24..000000000000
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * Copyright (C) 2015 Phytec Messtechnik GmbH
- * Author: Teresa Remmet <t.remmet@phytec.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/ {
-	model = "Phytec AM335x phyBOARD-WEGA";
-	compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
-
-	sound: sound_iface {
-		compatible = "ti,da830-evm-audio";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		vcc3v3: fixedregulator1 {
-			compatible = "regulator-fixed";
-			regulator-name = "vcc3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-		};
-	};
-};
-
-/* Audio */
-&am33xx_pinmux {
-	mcasp0_pins: pinmux_mcasp0 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9AC, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahclkx.mcasp0_ahclkx */
-			AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0)  /* mcasp0_aclkx.mcasp0_aclkx */
-			AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0)  /* mcasp0_fsx.mcasp0_fsx */
-			AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0)  /* mcasp0_axr0.mcasp0_axr0 */
-			AM33XX_IOPAD(0x9A8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */
-		>;
-	};
-};
-
-&i2c0 {
-	tlv320aic3007: tlv320aic3007@18 {
-		compatible = "ti,tlv320aic3007";
-		reg = <0x18>;
-		AVDD-supply = <&vcc3v3>;
-		IOVDD-supply = <&vcc3v3>;
-		DRVDD-supply = <&vcc3v3>;
-		DVDD-supply = <&vdig1_reg>;
-		status = "okay";
-	};
-};
-
-&mcasp0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcasp0_pins>;
-	op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	serial-dir = <
-		2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */
-	>;
-	tx-num-evt = <16>;
-	rt-num-evt = <16>;
-	status = "okay";
-};
-
-&sound {
-	ti,model = "AM335x-Wega";
-	ti,audio-codec = <&tlv320aic3007>;
-	ti,mcasp-controller = <&mcasp0>;
-	ti,audio-routing =
-		"Line Out",		"LLOUT",
-		"Line Out",		"RLOUT",
-		"LINE1L",		"Line In",
-		"LINE1R",		"Line In";
-	clocks = <&mcasp0_fck>;
-	clock-names = "mclk";
-	status = "okay";
-};
-
-/* CAN Busses */
-&am33xx_pinmux {
-	dcan1_pins: pinmux_dcan1 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x968, PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
-			AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
-		>;
-	};
-};
-
-&dcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan1_pins>;
-	status = "okay";
-};
-
-/* Ethernet */
-&am33xx_pinmux {
-	ethernet1_pins: pinmux_ethernet1 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a0.mii2_txen */
-			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
-			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a2.mii2_txd3 */
-			AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a3.mii2_txd2 */
-			AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a4.mii2_txd1 */
-			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a5.mii2_txd0 */
-			AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a6.mii2_txclk */
-			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a7.mii2_rxclk */
-			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a8.mii2_rxd3 */
-			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a9.mii2_rxd2 */
-			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a10.mii2_rxd1 */
-			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a11.mii2_rxd0 */
-			AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_wpn.mii2_rxerr */
-			AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ben1.mii2_col */
-		>;
-	};
-};
-
-&cpsw_emac1 {
-	phy-handle = <&phy1>;
-	phy-mode = "mii";
-	dual_emac_res_vlan = <2>;
-};
-
-&davinci_mdio {
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&mac {
-	slaves = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
-	dual_emac = <1>;
-};
-
-/* MMC */
-&am33xx_pinmux {
-	mmc1_pins: pinmux_mmc1 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
-			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
-			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
-			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
-			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
-			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
-			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE7)	/* spi0_cs1.mmc0_sdcd */
-		>;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&vcc3v3>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-/* Power */
-&vdig1_reg {
-	regulator-boot-on;
-	regulator-always-on;
-};
-
-/* UARTs */
-&am33xx_pinmux {
-	uart0_pins: pinmux_uart0 {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)    /* uart0_rxd.uart0_rxd */
-			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
-			AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0)		/* uart1_ctsn.uart1_ctsn */
-			AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	status = "okay";
-};
-
-/* USB */
-&cppi41dma {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi
deleted file mode 100644
index 8d8319590cde..000000000000
--- a/arch/arm/boot/dts/am33xx-clocks.dtsi
+++ /dev/null
@@ -1,646 +0,0 @@
-/*
- * Device Tree Source for AM33xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&scm_clocks {
-	sys_clkin_ck: sys_clkin_ck@40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0040>;
-	};
-
-	adc_tsc_fck: adc_tsc_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan0_fck: dcan0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan1_fck: dcan1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp0_fck: mcasp0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp1_fck: mcasp1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex0_fck: smartreflex0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex1_fck: smartreflex1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sha0_fck: sha0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	aes0_fck: aes0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	rng_fck: rng_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <0>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <1>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <2>;
-		reg = <0x0664>;
-	};
-};
-&prcm_clocks {
-	clk_32768_ck: clk_32768_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	clk_rc32k_ck: clk_rc32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_24000000_ck: virt_24000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	virt_25000000_ck: virt_25000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <25000000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	tclkin_ck: tclkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	dpll_core_ck: dpll_core_ck@490 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-core-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0490>, <0x045c>, <0x0468>;
-	};
-
-	dpll_core_x2_ck: dpll_core_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-x2-clock";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_m4_ck: dpll_core_m4_ck@480 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0480>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m5_ck: dpll_core_m5_ck@484 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0484>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m6_ck: dpll_core_m6_ck@4d8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x04d8>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_mpu_ck: dpll_mpu_ck@488 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0488>, <0x0420>, <0x042c>;
-	};
-
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck@4a8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		reg = <0x04a8>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_ddr_ck: dpll_ddr_ck@494 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-no-gate-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0494>, <0x0434>, <0x0440>;
-	};
-
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck@4a0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_ck>;
-		ti,max-div = <31>;
-		reg = <0x04a0>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_ddr_m2_div2_ck: dpll_ddr_m2_div2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_ddr_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	dpll_disp_ck: dpll_disp_ck@498 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-no-gate-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0498>, <0x0448>, <0x0454>;
-	};
-
-	dpll_disp_m2_ck: dpll_disp_m2_ck@4a4 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_disp_ck>;
-		ti,max-div = <31>;
-		reg = <0x04a4>;
-		ti,index-starts-at-one;
-		ti,set-rate-parent;
-	};
-
-	dpll_per_ck: dpll_per_ck@48c {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-no-gate-j-type-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x048c>, <0x0470>, <0x049c>;
-	};
-
-	dpll_per_m2_ck: dpll_per_m2_ck@4ac {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <31>;
-		reg = <0x04ac>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	cefuse_fck: cefuse_fck@a20 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_clkin_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0a20>;
-	};
-
-	clk_24mhz: clk_24mhz {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	clkdiv32k_ck: clkdiv32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&clk_24mhz>;
-		clock-mult = <1>;
-		clock-div = <732>;
-	};
-
-	clkdiv32k_ick: clkdiv32k_ick@14c {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x014c>;
-	};
-
-	l3_gclk: l3_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	pruss_ocp_gclk: pruss_ocp_gclk@530 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_gclk>, <&dpll_disp_m2_ck>;
-		reg = <0x0530>;
-	};
-
-	mmu_fck: mmu_fck@914 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_core_m4_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0914>;
-	};
-
-	timer1_fck: timer1_fck@528 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>;
-		reg = <0x0528>;
-	};
-
-	timer2_fck: timer2_fck@508 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x0508>;
-	};
-
-	timer3_fck: timer3_fck@50c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x050c>;
-	};
-
-	timer4_fck: timer4_fck@510 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x0510>;
-	};
-
-	timer5_fck: timer5_fck@518 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x0518>;
-	};
-
-	timer6_fck: timer6_fck@51c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x051c>;
-	};
-
-	timer7_fck: timer7_fck@504 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x0504>;
-	};
-
-	usbotg_fck: usbotg_fck@47c {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x047c>;
-	};
-
-	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	ieee5000_fck: ieee5000_fck@e4 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x00e4>;
-	};
-
-	wdt1_fck: wdt1_fck@538 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
-		reg = <0x0538>;
-	};
-
-	l4_rtc_gclk: l4_rtc_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l4hs_gclk: l4hs_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l3s_gclk: l3s_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4fw_gclk: l4fw_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4ls_gclk: l4ls_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sysclk_div_ck: sysclk_div_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m5_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@520 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>;
-		reg = <0x0520>;
-	};
-
-	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@53c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>;
-		reg = <0x053c>;
-	};
-
-	gpio0_dbclk: gpio0_dbclk@408 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&gpio0_dbclk_mux_ck>;
-		ti,bit-shift = <18>;
-		reg = <0x0408>;
-	};
-
-	gpio1_dbclk: gpio1_dbclk@ac {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <18>;
-		reg = <0x00ac>;
-	};
-
-	gpio2_dbclk: gpio2_dbclk@b0 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <18>;
-		reg = <0x00b0>;
-	};
-
-	gpio3_dbclk: gpio3_dbclk@b4 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <18>;
-		reg = <0x00b4>;
-	};
-
-	lcd_gclk: lcd_gclk@534 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
-		reg = <0x0534>;
-		ti,set-rate-parent;
-	};
-
-	mmc_clk: mmc_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@52c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x052c>;
-	};
-
-	gfx_fck_div_ck: gfx_fck_div_ck@52c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&gfx_fclk_clksel_ck>;
-		reg = <0x052c>;
-		ti,max-div = <2>;
-	};
-
-	sysclkout_pre_ck: sysclkout_pre_ck@700 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
-		reg = <0x0700>;
-	};
-
-	clkout2_div_ck: clkout2_div_ck@700 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sysclkout_pre_ck>;
-		ti,bit-shift = <3>;
-		ti,max-div = <8>;
-		reg = <0x0700>;
-	};
-
-	dbg_sysclk_ck: dbg_sysclk_ck@414 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_clkin_ck>;
-		ti,bit-shift = <19>;
-		reg = <0x0414>;
-	};
-
-	dbg_clka_ck: dbg_clka_ck@414 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_core_m4_ck>;
-		ti,bit-shift = <30>;
-		reg = <0x0414>;
-	};
-
-	stm_pmd_clock_mux_ck: stm_pmd_clock_mux_ck@414 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0414>;
-	};
-
-	trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck@414 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
-		ti,bit-shift = <20>;
-		reg = <0x0414>;
-	};
-
-	stm_clk_div_ck: stm_clk_div_ck@414 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&stm_pmd_clock_mux_ck>;
-		ti,bit-shift = <27>;
-		ti,max-div = <64>;
-		reg = <0x0414>;
-		ti,index-power-of-two;
-	};
-
-	trace_clk_div_ck: trace_clk_div_ck@414 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&trace_pmd_clk_mux_ck>;
-		ti,bit-shift = <24>;
-		ti,max-div = <64>;
-		reg = <0x0414>;
-		ti,index-power-of-two;
-	};
-
-	clkout2_ck: clkout2_ck@700 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkout2_div_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0700>;
-	};
-};
-
-&prcm_clockdomains {
-	clk_24mhz_clkdm: clk_24mhz_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&clkdiv32k_ick>;
-	};
-};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
deleted file mode 100644
index 7d7ca054c557..000000000000
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ /dev/null
@@ -1,1005 +0,0 @@
-/*
- * Device Tree Source for AM33XX SoC
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/am33xx.h>
-
-/ {
-	compatible = "ti,am33xx";
-	interrupt-parent = <&intc>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	chosen { };
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		d_can0 = &dcan0;
-		d_can1 = &dcan1;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		phy0 = &usb0_phy;
-		phy1 = &usb1_phy;
-		ethernet0 = &cpsw_emac0;
-		ethernet1 = &cpsw_emac1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-			device_type = "cpu";
-			reg = <0>;
-
-			operating-points-v2 = <&cpu0_opp_table>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-		};
-	};
-
-	cpu0_opp_table: opp-table {
-		compatible = "operating-points-v2-ti-cpu";
-		syscon = <&scm_conf>;
-
-		/*
-		 * The three following nodes are marked with opp-suspend
-		 * because the can not be enabled simultaneously on a
-		 * single SoC.
-		 */
-		opp50-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <950000 931000 969000>;
-			opp-supported-hw = <0x06 0x0010>;
-			opp-suspend;
-		};
-
-		opp100-275000000 {
-			opp-hz = /bits/ 64 <275000000>;
-			opp-microvolt = <1100000 1078000 1122000>;
-			opp-supported-hw = <0x01 0x00FF>;
-			opp-suspend;
-		};
-
-		opp100-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <1100000 1078000 1122000>;
-			opp-supported-hw = <0x06 0x0020>;
-			opp-suspend;
-		};
-
-		opp100-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <1100000 1078000 1122000>;
-			opp-supported-hw = <0x01 0xFFFF>;
-		};
-
-		opp100-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <1100000 1078000 1122000>;
-			opp-supported-hw = <0x06 0x0040>;
-		};
-
-		opp120-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <1200000 1176000 1224000>;
-			opp-supported-hw = <0x01 0xFFFF>;
-		};
-
-		opp120-720000000 {
-			opp-hz = /bits/ 64 <720000000>;
-			opp-microvolt = <1200000 1176000 1224000>;
-			opp-supported-hw = <0x06 0x0080>;
-		};
-
-		oppturbo-720000000 {
-			opp-hz = /bits/ 64 <720000000>;
-			opp-microvolt = <1260000 1234800 1285200>;
-			opp-supported-hw = <0x01 0xFFFF>;
-		};
-
-		oppturbo-800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1260000 1234800 1285200>;
-			opp-supported-hw = <0x06 0x0100>;
-		};
-
-		oppnitro-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1325000 1298500 1351500>;
-			opp-supported-hw = <0x04 0x0200>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a8-pmu";
-		interrupts = <3>;
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap3-mpu";
-			ti,hwmods = "mpu";
-		};
-	};
-
-	/*
-	 * XXX: Use a flat representation of the AM33XX interconnect.
-	 * The real AM33XX interconnect network is quite complex. Since
-	 * it will not bring real advantage to represent that in DT
-	 * for the moment, just use a fake OCP bus entry to represent
-	 * the whole bus hierarchy.
-	 */
-	ocp {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main";
-
-		l4_wkup: l4_wkup@44c00000 {
-			compatible = "ti,am3-l4-wkup", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x44c00000 0x280000>;
-
-			wkup_m3: wkup_m3@100000 {
-				compatible = "ti,am3352-wkup-m3";
-				reg = <0x100000 0x4000>,
-				      <0x180000	0x2000>;
-				reg-names = "umem", "dmem";
-				ti,hwmods = "wkup_m3";
-				ti,pm-firmware = "am335x-pm-firmware.elf";
-			};
-
-			prcm: prcm@200000 {
-				compatible = "ti,am3-prcm";
-				reg = <0x200000 0x4000>;
-
-				prcm_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				prcm_clockdomains: clockdomains {
-				};
-			};
-
-			scm: scm@210000 {
-				compatible = "ti,am3-scm", "simple-bus";
-				reg = <0x210000 0x2000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				#pinctrl-cells = <1>;
-				ranges = <0 0x210000 0x2000>;
-
-				am33xx_pinmux: pinmux@800 {
-					compatible = "pinctrl-single";
-					reg = <0x800 0x238>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#pinctrl-cells = <1>;
-					pinctrl-single,register-width = <32>;
-					pinctrl-single,function-mask = <0x7f>;
-				};
-
-				scm_conf: scm_conf@0 {
-					compatible = "syscon", "simple-bus";
-					reg = <0x0 0x800>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0 0x800>;
-
-					scm_clocks: clocks {
-						#address-cells = <1>;
-						#size-cells = <0>;
-					};
-				};
-
-				wkup_m3_ipc: wkup_m3_ipc@1324 {
-					compatible = "ti,am3352-wkup-m3-ipc";
-					reg = <0x1324 0x24>;
-					interrupts = <78>;
-					ti,rproc = <&wkup_m3>;
-					mboxes = <&mailbox &mbox_wkupm3>;
-				};
-
-				edma_xbar: dma-router@f90 {
-					compatible = "ti,am335x-edma-crossbar";
-					reg = <0xf90 0x40>;
-					#dma-cells = <3>;
-					dma-requests = <32>;
-					dma-masters = <&edma>;
-				};
-
-				scm_clockdomains: clockdomains {
-				};
-			};
-		};
-
-		intc: interrupt-controller@48200000 {
-			compatible = "ti,am33xx-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x48200000 0x1000>;
-		};
-
-		edma: edma@49000000 {
-			compatible = "ti,edma3-tpcc";
-			ti,hwmods = "tpcc";
-			reg =	<0x49000000 0x10000>;
-			reg-names = "edma3_cc";
-			interrupts = <12 13 14>;
-			interrupt-names = "edma3_ccint", "edma3_mperr",
-					  "edma3_ccerrint";
-			dma-requests = <64>;
-			#dma-cells = <2>;
-
-			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
-				   <&edma_tptc2 0>;
-
-			ti,edma-memcpy-channels = <20 21>;
-		};
-
-		edma_tptc0: tptc@49800000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc0";
-			reg =	<0x49800000 0x100000>;
-			interrupts = <112>;
-			interrupt-names = "edma3_tcerrint";
-		};
-
-		edma_tptc1: tptc@49900000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc1";
-			reg =	<0x49900000 0x100000>;
-			interrupts = <113>;
-			interrupt-names = "edma3_tcerrint";
-		};
-
-		edma_tptc2: tptc@49a00000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc2";
-			reg =	<0x49a00000 0x100000>;
-			interrupts = <114>;
-			interrupt-names = "edma3_tcerrint";
-		};
-
-		gpio0: gpio@44e07000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio1";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x44e07000 0x1000>;
-			interrupts = <96>;
-		};
-
-		gpio1: gpio@4804c000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio2";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x4804c000 0x1000>;
-			interrupts = <98>;
-		};
-
-		gpio2: gpio@481ac000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio3";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x481ac000 0x1000>;
-			interrupts = <32>;
-		};
-
-		gpio3: gpio@481ae000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio4";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x481ae000 0x1000>;
-			interrupts = <62>;
-		};
-
-		uart0: serial@44e09000 {
-			compatible = "ti,am3352-uart", "ti,omap3-uart";
-			ti,hwmods = "uart1";
-			clock-frequency = <48000000>;
-			reg = <0x44e09000 0x2000>;
-			interrupts = <72>;
-			status = "disabled";
-			dmas = <&edma 26 0>, <&edma 27 0>;
-			dma-names = "tx", "rx";
-		};
-
-		uart1: serial@48022000 {
-			compatible = "ti,am3352-uart", "ti,omap3-uart";
-			ti,hwmods = "uart2";
-			clock-frequency = <48000000>;
-			reg = <0x48022000 0x2000>;
-			interrupts = <73>;
-			status = "disabled";
-			dmas = <&edma 28 0>, <&edma 29 0>;
-			dma-names = "tx", "rx";
-		};
-
-		uart2: serial@48024000 {
-			compatible = "ti,am3352-uart", "ti,omap3-uart";
-			ti,hwmods = "uart3";
-			clock-frequency = <48000000>;
-			reg = <0x48024000 0x2000>;
-			interrupts = <74>;
-			status = "disabled";
-			dmas = <&edma 30 0>, <&edma 31 0>;
-			dma-names = "tx", "rx";
-		};
-
-		uart3: serial@481a6000 {
-			compatible = "ti,am3352-uart", "ti,omap3-uart";
-			ti,hwmods = "uart4";
-			clock-frequency = <48000000>;
-			reg = <0x481a6000 0x2000>;
-			interrupts = <44>;
-			status = "disabled";
-		};
-
-		uart4: serial@481a8000 {
-			compatible = "ti,am3352-uart", "ti,omap3-uart";
-			ti,hwmods = "uart5";
-			clock-frequency = <48000000>;
-			reg = <0x481a8000 0x2000>;
-			interrupts = <45>;
-			status = "disabled";
-		};
-
-		uart5: serial@481aa000 {
-			compatible = "ti,am3352-uart", "ti,omap3-uart";
-			ti,hwmods = "uart6";
-			clock-frequency = <48000000>;
-			reg = <0x481aa000 0x2000>;
-			interrupts = <46>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@44e0b000 {
-			compatible = "ti,omap4-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c1";
-			reg = <0x44e0b000 0x1000>;
-			interrupts = <70>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@4802a000 {
-			compatible = "ti,omap4-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c2";
-			reg = <0x4802a000 0x1000>;
-			interrupts = <71>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@4819c000 {
-			compatible = "ti,omap4-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c3";
-			reg = <0x4819c000 0x1000>;
-			interrupts = <30>;
-			status = "disabled";
-		};
-
-		mmc1: mmc@48060000 {
-			compatible = "ti,omap4-hsmmc";
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			ti,needs-special-reset;
-			ti,needs-special-hs-handling;
-			dmas = <&edma_xbar 24 0 0
-				&edma_xbar 25 0 0>;
-			dma-names = "tx", "rx";
-			interrupts = <64>;
-			reg = <0x48060000 0x1000>;
-			status = "disabled";
-		};
-
-		mmc2: mmc@481d8000 {
-			compatible = "ti,omap4-hsmmc";
-			ti,hwmods = "mmc2";
-			ti,needs-special-reset;
-			dmas = <&edma 2 0
-				&edma 3 0>;
-			dma-names = "tx", "rx";
-			interrupts = <28>;
-			reg = <0x481d8000 0x1000>;
-			status = "disabled";
-		};
-
-		mmc3: mmc@47810000 {
-			compatible = "ti,omap4-hsmmc";
-			ti,hwmods = "mmc3";
-			ti,needs-special-reset;
-			interrupts = <29>;
-			reg = <0x47810000 0x1000>;
-			status = "disabled";
-		};
-
-		hwspinlock: spinlock@480ca000 {
-			compatible = "ti,omap4-hwspinlock";
-			reg = <0x480ca000 0x1000>;
-			ti,hwmods = "spinlock";
-			#hwlock-cells = <1>;
-		};
-
-		wdt2: wdt@44e35000 {
-			compatible = "ti,omap3-wdt";
-			ti,hwmods = "wd_timer2";
-			reg = <0x44e35000 0x1000>;
-			interrupts = <91>;
-		};
-
-		dcan0: can@481cc000 {
-			compatible = "ti,am3352-d_can";
-			ti,hwmods = "d_can0";
-			reg = <0x481cc000 0x2000>;
-			clocks = <&dcan0_fck>;
-			clock-names = "fck";
-			syscon-raminit = <&scm_conf 0x644 0>;
-			interrupts = <52>;
-			status = "disabled";
-		};
-
-		dcan1: can@481d0000 {
-			compatible = "ti,am3352-d_can";
-			ti,hwmods = "d_can1";
-			reg = <0x481d0000 0x2000>;
-			clocks = <&dcan1_fck>;
-			clock-names = "fck";
-			syscon-raminit = <&scm_conf 0x644 1>;
-			interrupts = <55>;
-			status = "disabled";
-		};
-
-		mailbox: mailbox@480C8000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x480C8000 0x200>;
-			interrupts = <77>;
-			ti,hwmods = "mailbox";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <8>;
-			mbox_wkupm3: wkup_m3 {
-				ti,mbox-send-noirq;
-				ti,mbox-tx = <0 0 0>;
-				ti,mbox-rx = <0 0 3>;
-			};
-		};
-
-		timer1: timer@44e31000 {
-			compatible = "ti,am335x-timer-1ms";
-			reg = <0x44e31000 0x400>;
-			interrupts = <67>;
-			ti,hwmods = "timer1";
-			ti,timer-alwon;
-		};
-
-		timer2: timer@48040000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48040000 0x400>;
-			interrupts = <68>;
-			ti,hwmods = "timer2";
-		};
-
-		timer3: timer@48042000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48042000 0x400>;
-			interrupts = <69>;
-			ti,hwmods = "timer3";
-		};
-
-		timer4: timer@48044000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48044000 0x400>;
-			interrupts = <92>;
-			ti,hwmods = "timer4";
-			ti,timer-pwm;
-		};
-
-		timer5: timer@48046000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48046000 0x400>;
-			interrupts = <93>;
-			ti,hwmods = "timer5";
-			ti,timer-pwm;
-		};
-
-		timer6: timer@48048000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48048000 0x400>;
-			interrupts = <94>;
-			ti,hwmods = "timer6";
-			ti,timer-pwm;
-		};
-
-		timer7: timer@4804a000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x4804a000 0x400>;
-			interrupts = <95>;
-			ti,hwmods = "timer7";
-			ti,timer-pwm;
-		};
-
-		rtc: rtc@44e3e000 {
-			compatible = "ti,am3352-rtc", "ti,da830-rtc";
-			reg = <0x44e3e000 0x1000>;
-			interrupts = <75
-				      76>;
-			ti,hwmods = "rtc";
-			clocks = <&clkdiv32k_ick>;
-			clock-names = "int-clk";
-		};
-
-		spi0: spi@48030000 {
-			compatible = "ti,omap4-mcspi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x48030000 0x400>;
-			interrupts = <65>;
-			ti,spi-num-cs = <2>;
-			ti,hwmods = "spi0";
-			dmas = <&edma 16 0
-				&edma 17 0
-				&edma 18 0
-				&edma 19 0>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-			status = "disabled";
-		};
-
-		spi1: spi@481a0000 {
-			compatible = "ti,omap4-mcspi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x481a0000 0x400>;
-			interrupts = <125>;
-			ti,spi-num-cs = <2>;
-			ti,hwmods = "spi1";
-			dmas = <&edma 42 0
-				&edma 43 0
-				&edma 44 0
-				&edma 45 0>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-			status = "disabled";
-		};
-
-		usb: usb@47400000 {
-			compatible = "ti,am33xx-usb";
-			reg = <0x47400000 0x1000>;
-			ranges;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ti,hwmods = "usb_otg_hs";
-			status = "disabled";
-
-			usb_ctrl_mod: control@44e10620 {
-				compatible = "ti,am335x-usb-ctrl-module";
-				reg = <0x44e10620 0x10
-					0x44e10648 0x4>;
-				reg-names = "phy_ctrl", "wakeup";
-				status = "disabled";
-			};
-
-			usb0_phy: usb-phy@47401300 {
-				compatible = "ti,am335x-usb-phy";
-				reg = <0x47401300 0x100>;
-				reg-names = "phy";
-				status = "disabled";
-				ti,ctrl_mod = <&usb_ctrl_mod>;
-			};
-
-			usb0: usb@47401000 {
-				compatible = "ti,musb-am33xx";
-				status = "disabled";
-				reg = <0x47401400 0x400
-					0x47401000 0x200>;
-				reg-names = "mc", "control";
-
-				interrupts = <18>;
-				interrupt-names = "mc";
-				dr_mode = "otg";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-				phys = <&usb0_phy>;
-
-				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
-					&cppi41dma  2 0 &cppi41dma  3 0
-					&cppi41dma  4 0 &cppi41dma  5 0
-					&cppi41dma  6 0 &cppi41dma  7 0
-					&cppi41dma  8 0 &cppi41dma  9 0
-					&cppi41dma 10 0 &cppi41dma 11 0
-					&cppi41dma 12 0 &cppi41dma 13 0
-					&cppi41dma 14 0 &cppi41dma  0 1
-					&cppi41dma  1 1 &cppi41dma  2 1
-					&cppi41dma  3 1 &cppi41dma  4 1
-					&cppi41dma  5 1 &cppi41dma  6 1
-					&cppi41dma  7 1 &cppi41dma  8 1
-					&cppi41dma  9 1 &cppi41dma 10 1
-					&cppi41dma 11 1 &cppi41dma 12 1
-					&cppi41dma 13 1 &cppi41dma 14 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			usb1_phy: usb-phy@47401b00 {
-				compatible = "ti,am335x-usb-phy";
-				reg = <0x47401b00 0x100>;
-				reg-names = "phy";
-				status = "disabled";
-				ti,ctrl_mod = <&usb_ctrl_mod>;
-			};
-
-			usb1: usb@47401800 {
-				compatible = "ti,musb-am33xx";
-				status = "disabled";
-				reg = <0x47401c00 0x400
-					0x47401800 0x200>;
-				reg-names = "mc", "control";
-				interrupts = <19>;
-				interrupt-names = "mc";
-				dr_mode = "otg";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-				phys = <&usb1_phy>;
-
-				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
-					&cppi41dma 17 0 &cppi41dma 18 0
-					&cppi41dma 19 0 &cppi41dma 20 0
-					&cppi41dma 21 0 &cppi41dma 22 0
-					&cppi41dma 23 0 &cppi41dma 24 0
-					&cppi41dma 25 0 &cppi41dma 26 0
-					&cppi41dma 27 0 &cppi41dma 28 0
-					&cppi41dma 29 0 &cppi41dma 15 1
-					&cppi41dma 16 1 &cppi41dma 17 1
-					&cppi41dma 18 1 &cppi41dma 19 1
-					&cppi41dma 20 1 &cppi41dma 21 1
-					&cppi41dma 22 1 &cppi41dma 23 1
-					&cppi41dma 24 1 &cppi41dma 25 1
-					&cppi41dma 26 1 &cppi41dma 27 1
-					&cppi41dma 28 1 &cppi41dma 29 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			cppi41dma: dma-controller@47402000 {
-				compatible = "ti,am3359-cppi41";
-				reg =  <0x47400000 0x1000
-					0x47402000 0x1000
-					0x47403000 0x1000
-					0x47404000 0x4000>;
-				reg-names = "glue", "controller", "scheduler", "queuemgr";
-				interrupts = <17>;
-				interrupt-names = "glue";
-				#dma-cells = <2>;
-				#dma-channels = <30>;
-				#dma-requests = <256>;
-				status = "disabled";
-			};
-		};
-
-		epwmss0: epwmss@48300000 {
-			compatible = "ti,am33xx-pwmss";
-			reg = <0x48300000 0x10>;
-			ti,hwmods = "epwmss0";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-			ranges = <0x48300100 0x48300100 0x80   /* ECAP */
-				  0x48300180 0x48300180 0x80   /* EQEP */
-				  0x48300200 0x48300200 0x80>; /* EHRPWM */
-
-			ecap0: ecap@48300100 {
-				compatible = "ti,am3352-ecap",
-					     "ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48300100 0x80>;
-				clocks = <&l4ls_gclk>;
-				clock-names = "fck";
-				interrupts = <31>;
-				interrupt-names = "ecap0";
-				status = "disabled";
-			};
-
-			ehrpwm0: pwm@48300200 {
-				compatible = "ti,am3352-ehrpwm",
-					     "ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48300200 0x80>;
-				clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
-				clock-names = "tbclk", "fck";
-				status = "disabled";
-			};
-		};
-
-		epwmss1: epwmss@48302000 {
-			compatible = "ti,am33xx-pwmss";
-			reg = <0x48302000 0x10>;
-			ti,hwmods = "epwmss1";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-			ranges = <0x48302100 0x48302100 0x80   /* ECAP */
-				  0x48302180 0x48302180 0x80   /* EQEP */
-				  0x48302200 0x48302200 0x80>; /* EHRPWM */
-
-			ecap1: ecap@48302100 {
-				compatible = "ti,am3352-ecap",
-					     "ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48302100 0x80>;
-				clocks = <&l4ls_gclk>;
-				clock-names = "fck";
-				interrupts = <47>;
-				interrupt-names = "ecap1";
-				status = "disabled";
-			};
-
-			ehrpwm1: pwm@48302200 {
-				compatible = "ti,am3352-ehrpwm",
-					     "ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48302200 0x80>;
-				clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
-				clock-names = "tbclk", "fck";
-				status = "disabled";
-			};
-		};
-
-		epwmss2: epwmss@48304000 {
-			compatible = "ti,am33xx-pwmss";
-			reg = <0x48304000 0x10>;
-			ti,hwmods = "epwmss2";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-			ranges = <0x48304100 0x48304100 0x80   /* ECAP */
-				  0x48304180 0x48304180 0x80   /* EQEP */
-				  0x48304200 0x48304200 0x80>; /* EHRPWM */
-
-			ecap2: ecap@48304100 {
-				compatible = "ti,am3352-ecap",
-					     "ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48304100 0x80>;
-				clocks = <&l4ls_gclk>;
-				clock-names = "fck";
-				interrupts = <61>;
-				interrupt-names = "ecap2";
-				status = "disabled";
-			};
-
-			ehrpwm2: pwm@48304200 {
-				compatible = "ti,am3352-ehrpwm",
-					     "ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48304200 0x80>;
-				clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
-				clock-names = "tbclk", "fck";
-				status = "disabled";
-			};
-		};
-
-		mac: ethernet@4a100000 {
-			compatible = "ti,am335x-cpsw","ti,cpsw";
-			ti,hwmods = "cpgmac0";
-			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
-			clock-names = "fck", "cpts";
-			cpdma_channels = <8>;
-			ale_entries = <1024>;
-			bd_ram_size = <0x2000>;
-			mac_control = <0x20>;
-			slaves = <2>;
-			active_slave = <0>;
-			cpts_clock_mult = <0x80000000>;
-			cpts_clock_shift = <29>;
-			reg = <0x4a100000 0x800
-			       0x4a101200 0x100>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			/*
-			 * c0_rx_thresh_pend
-			 * c0_rx_pend
-			 * c0_tx_pend
-			 * c0_misc_pend
-			 */
-			interrupts = <40 41 42 43>;
-			ranges;
-			syscon = <&scm_conf>;
-			status = "disabled";
-
-			davinci_mdio: mdio@4a101000 {
-				compatible = "ti,cpsw-mdio","ti,davinci_mdio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,hwmods = "davinci_mdio";
-				bus_freq = <1000000>;
-				reg = <0x4a101000 0x100>;
-				status = "disabled";
-			};
-
-			cpsw_emac0: slave@4a100200 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			cpsw_emac1: slave@4a100300 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			phy_sel: cpsw-phy-sel@44e10650 {
-				compatible = "ti,am3352-cpsw-phy-sel";
-				reg= <0x44e10650 0x4>;
-				reg-names = "gmii-sel";
-			};
-		};
-
-		ocmcram: ocmcram@40300000 {
-			compatible = "mmio-sram";
-			reg = <0x40300000 0x10000>; /* 64k */
-		};
-
-		elm: elm@48080000 {
-			compatible = "ti,am3352-elm";
-			reg = <0x48080000 0x2000>;
-			interrupts = <4>;
-			ti,hwmods = "elm";
-			status = "disabled";
-		};
-
-		lcdc: lcdc@4830e000 {
-			compatible = "ti,am33xx-tilcdc";
-			reg = <0x4830e000 0x1000>;
-			interrupts = <36>;
-			ti,hwmods = "lcdc";
-			status = "disabled";
-		};
-
-		tscadc: tscadc@44e0d000 {
-			compatible = "ti,am3359-tscadc";
-			reg = <0x44e0d000 0x1000>;
-			interrupts = <16>;
-			ti,hwmods = "adc_tsc";
-			status = "disabled";
-			dmas = <&edma 53 0>, <&edma 57 0>;
-			dma-names = "fifo0", "fifo1";
-
-			tsc {
-				compatible = "ti,am3359-tsc";
-			};
-			am335x_adc: adc {
-				#io-channel-cells = <1>;
-				compatible = "ti,am3359-adc";
-			};
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,am3352-gpmc";
-			ti,hwmods = "gpmc";
-			ti,no-idle-on-init;
-			reg = <0x50000000 0x2000>;
-			interrupts = <100>;
-			dmas = <&edma 52 0>;
-			dma-names = "rxtx";
-			gpmc,num-cs = <7>;
-			gpmc,num-waitpins = <2>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			status = "disabled";
-		};
-
-		sham: sham@53100000 {
-			compatible = "ti,omap4-sham";
-			ti,hwmods = "sham";
-			reg = <0x53100000 0x200>;
-			interrupts = <109>;
-			dmas = <&edma 36 0>;
-			dma-names = "rx";
-		};
-
-		aes: aes@53500000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes";
-			reg = <0x53500000 0xa0>;
-			interrupts = <103>;
-			dmas = <&edma 6 0>,
-			       <&edma 5 0>;
-			dma-names = "tx", "rx";
-		};
-
-		mcasp0: mcasp@48038000 {
-			compatible = "ti,am33xx-mcasp-audio";
-			ti,hwmods = "mcasp0";
-			reg = <0x48038000 0x2000>,
-			      <0x46000000 0x400000>;
-			reg-names = "mpu", "dat";
-			interrupts = <80>, <81>;
-			interrupt-names = "tx", "rx";
-			status = "disabled";
-			dmas = <&edma 8 2>,
-				<&edma 9 2>;
-			dma-names = "tx", "rx";
-		};
-
-		mcasp1: mcasp@4803C000 {
-			compatible = "ti,am33xx-mcasp-audio";
-			ti,hwmods = "mcasp1";
-			reg = <0x4803C000 0x2000>,
-			      <0x46400000 0x400000>;
-			reg-names = "mpu", "dat";
-			interrupts = <82>, <83>;
-			interrupt-names = "tx", "rx";
-			status = "disabled";
-			dmas = <&edma 10 2>,
-				<&edma 11 2>;
-			dma-names = "tx", "rx";
-		};
-
-		rng: rng@48310000 {
-			compatible = "ti,omap4-rng";
-			ti,hwmods = "rng";
-			reg = <0x48310000 0x2000>;
-			interrupts = <111>;
-		};
-	};
-};
-
-/include/ "am33xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
deleted file mode 100644
index 0e4a125f78e3..000000000000
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am3517.dtsi"
-
-/ {
-	model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
-	compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-        vmmc_fixed: vmmc {
-                compatible = "regulator-fixed";
-                regulator-name = "vmmc_fixed";
-                regulator-min-microvolt = <3300000>;
-                regulator-max-microvolt = <3300000>;
-        };
-};
-
-&davinci_emac {
-	     status = "okay";
-};
-
-&davinci_mdio {
-	     status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc_fixed>;
-	bus-width = <4>;
-};
-
-&mmc2 {
-      status = "disabled";
-};
-
-&mmc3 {
-      status = "disabled";
-};
-
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
deleted file mode 100644
index 00da3f2c4072..000000000000
--- a/arch/arm/boot/dts/am3517.dtsi
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * Device Tree Source for am3517 SoC
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include "omap3.dtsi"
-
-/ {
-	aliases {
-		serial3 = &uart4;
-		can = &hecc;
-	};
-
-	ocp@68000000 {
-		am35x_otg_hs: am35x_otg_hs@5c040000 {
-			compatible = "ti,omap3-musb";
-			ti,hwmods = "am35x_otg_hs";
-			status = "disabled";
-			reg = <0x5c040000 0x1000>;
-			interrupts = <71>;
-			interrupt-names = "mc";
-		};
-
-		davinci_emac: ethernet@0x5c000000 {
-			compatible = "ti,am3517-emac";
-			ti,hwmods = "davinci_emac";
-			status = "disabled";
-			reg = <0x5c000000 0x30000>;
-			interrupts = <67 68 69 70>;
-			syscon = <&scm_conf>;
-			ti,davinci-ctrl-reg-offset = <0x10000>;
-			ti,davinci-ctrl-mod-reg-offset = <0>;
-			ti,davinci-ctrl-ram-offset = <0x20000>;
-			ti,davinci-ctrl-ram-size = <0x2000>;
-			ti,davinci-rmii-en = /bits/ 8 <1>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-		};
-
-		davinci_mdio: ethernet@0x5c030000 {
-			compatible = "ti,davinci_mdio";
-			ti,hwmods = "davinci_mdio";
-			status = "disabled";
-			reg = <0x5c030000 0x1000>;
-			bus_freq = <1000000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		uart4: serial@4809e000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart4";
-			status = "disabled";
-			reg = <0x4809e000 0x400>;
-			interrupts = <84>;
-			dmas = <&sdma 55 &sdma 54>;
-			dma-names = "tx", "rx";
-			clock-frequency = <48000000>;
-		};
-
-		omap3_pmx_core2: pinmux@480025d8 {
-			compatible = "ti,omap3-padconf", "pinctrl-single";
-			reg = <0x480025d8 0x24>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#pinctrl-cells = <1>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0xff1f>;
-		};
-
-		hecc: can@5c050000 {
-			compatible = "ti,am3517-hecc";
-			status = "disabled";
-			reg = <0x5c050000 0x80>,
-			      <0x5c053000 0x180>,
-			      <0x5c052000 0x200>;
-			reg-names = "hecc", "hecc-ram", "mbx";
-			interrupts = <24>;
-			clocks = <&hecc_ck>;
-		};
-	};
-};
-
-&iva {
-	status = "disabled";
-};
-
-&mailbox {
-	status = "disabled";
-};
-
-&mmu_isp {
-	status = "disabled";
-};
-
-&smartreflex_mpu_iva {
-	status = "disabled";
-};
-
-/include/ "am35xx-clocks.dtsi"
-/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/arch/arm/boot/dts/am3517_mt_ventoux.dts b/arch/arm/boot/dts/am3517_mt_ventoux.dts
deleted file mode 100644
index 3395783c5b4e..000000000000
--- a/arch/arm/boot/dts/am3517_mt_ventoux.dts
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2011 Ilya Yanok, EmCraft Systems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-
-/ {
-	model = "TeeJet Mt.Ventoux";
-	compatible = "teejet,mt_ventoux", "ti,omap3";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	/* AM35xx doesn't have IVA */
-	soc {
-		iva {
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi
deleted file mode 100644
index 00dd1f091be5..000000000000
--- a/arch/arm/boot/dts/am35xx-clocks.dtsi
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Device Tree Source for OMAP3 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&scm_clocks {
-	emac_ick: emac_ick@32c {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&ipss_ick>;
-		reg = <0x032c>;
-		ti,bit-shift = <1>;
-	};
-
-	emac_fck: emac_fck@32c {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&rmii_ck>;
-		reg = <0x032c>;
-		ti,bit-shift = <9>;
-	};
-
-	vpfe_ick: vpfe_ick@32c {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&ipss_ick>;
-		reg = <0x032c>;
-		ti,bit-shift = <2>;
-	};
-
-	vpfe_fck: vpfe_fck@32c {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&pclk_ck>;
-		reg = <0x032c>;
-		ti,bit-shift = <10>;
-	};
-
-	hsotgusb_ick_am35xx: hsotgusb_ick_am35xx@32c {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&ipss_ick>;
-		reg = <0x032c>;
-		ti,bit-shift = <0>;
-	};
-
-	hsotgusb_fck_am35xx: hsotgusb_fck_am35xx@32c {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x032c>;
-		ti,bit-shift = <8>;
-	};
-
-	hecc_ck: hecc_ck@32c {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x032c>;
-		ti,bit-shift = <3>;
-	};
-};
-&cm_clocks {
-	ipss_ick: ipss_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-interface-clock";
-		clocks = <&core_l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <4>;
-	};
-
-	rmii_ck: rmii_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <50000000>;
-	};
-
-	pclk_ck: pclk_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <27000000>;
-	};
-
-	uart4_ick_am35xx: uart4_ick_am35xx@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <23>;
-	};
-
-	uart4_fck_am35xx: uart4_fck_am35xx@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <23>;
-	};
-};
-
-&cm_clockdomains {
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&sdrc_ick>, <&ipss_ick>, <&emac_ick>, <&vpfe_ick>,
-			 <&hsotgusb_ick_am35xx>, <&hsotgusb_fck_am35xx>,
-			 <&hecc_ck>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
-			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
-			 <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
-			 <&uart4_ick_am35xx>, <&uart4_fck_am35xx>;
-	};
-};
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
deleted file mode 100644
index e5b061469bf8..000000000000
--- a/arch/arm/boot/dts/am4372.dtsi
+++ /dev/null
@@ -1,1176 +0,0 @@
-/*
- * Device Tree Source for AM4372 SoC
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	compatible = "ti,am4372", "ti,am43";
-	interrupt-parent = <&wakeupgen>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	chosen { };
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0>;
-	};
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		ethernet0 = &cpsw_emac0;
-		ethernet1 = &cpsw_emac1;
-		spi0 = &qspi;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu: cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			operating-points-v2 = <&cpu0_opp_table>;
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-		};
-	};
-
-	cpu0_opp_table: opp-table {
-		compatible = "operating-points-v2-ti-cpu";
-		syscon = <&scm_conf>;
-
-		opp50-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <950000 931000 969000>;
-			opp-supported-hw = <0xFF 0x01>;
-			opp-suspend;
-		};
-
-		opp100-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <1100000 1078000 1122000>;
-			opp-supported-hw = <0xFF 0x04>;
-		};
-
-		opp120-720000000 {
-			opp-hz = /bits/ 64 <720000000>;
-			opp-microvolt = <1200000 1176000 1224000>;
-			opp-supported-hw = <0xFF 0x08>;
-		};
-
-		oppturbo-800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1260000 1234800 1285200>;
-			opp-supported-hw = <0xFF 0x10>;
-		};
-
-		oppnitro-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1325000 1298500 1351500>;
-			opp-supported-hw = <0xFF 0x20>;
-		};
-	};
-
-	gic: interrupt-controller@48241000 {
-		compatible = "arm,cortex-a9-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0x48241000 0x1000>,
-		      <0x48240100 0x0100>;
-		interrupt-parent = <&gic>;
-	};
-
-	wakeupgen: interrupt-controller@48281000 {
-		compatible = "ti,omap4-wugen-mpu";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0x48281000 0x1000>;
-		interrupt-parent = <&gic>;
-	};
-
-	scu: scu@48240000 {
-		compatible = "arm,cortex-a9-scu";
-		reg = <0x48240000 0x100>;
-	};
-
-	global_timer: timer@48240200 {
-		compatible = "arm,cortex-a9-global-timer";
-		reg = <0x48240200 0x100>;
-		interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
-		interrupt-parent = <&gic>;
-		clocks = <&mpu_periphclk>;
-	};
-
-	local_timer: timer@48240600 {
-		compatible = "arm,cortex-a9-twd-timer";
-		reg = <0x48240600 0x100>;
-		interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
-		interrupt-parent = <&gic>;
-		clocks = <&mpu_periphclk>;
-	};
-
-	l2-cache-controller@48242000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x48242000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	ocp@44000000 {
-		compatible = "ti,am4372-l3-noc", "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main";
-		reg = <0x44000000 0x400000
-		       0x44800000 0x400000>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-
-		l4_wkup: l4_wkup@44c00000 {
-			compatible = "ti,am4-l4-wkup", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x44c00000 0x287000>;
-
-			wkup_m3: wkup_m3@100000 {
-				compatible = "ti,am4372-wkup-m3";
-				reg = <0x100000 0x4000>,
-				      <0x180000	0x2000>;
-				reg-names = "umem", "dmem";
-				ti,hwmods = "wkup_m3";
-				ti,pm-firmware = "am335x-pm-firmware.elf";
-			};
-
-			prcm: prcm@1f0000 {
-				compatible = "ti,am4-prcm";
-				reg = <0x1f0000 0x11000>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-
-				prcm_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				prcm_clockdomains: clockdomains {
-				};
-			};
-
-			scm: scm@210000 {
-				compatible = "ti,am4-scm", "simple-bus";
-				reg = <0x210000 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x210000 0x4000>;
-
-				am43xx_pinmux: pinmux@800 {
-					compatible = "ti,am437-padconf",
-						     "pinctrl-single";
-					reg = <0x800 0x31c>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#pinctrl-cells = <1>;
-					#interrupt-cells = <1>;
-					interrupt-controller;
-					pinctrl-single,register-width = <32>;
-					pinctrl-single,function-mask = <0xffffffff>;
-				};
-
-				scm_conf: scm_conf@0 {
-					compatible = "syscon";
-					reg = <0x0 0x800>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					scm_clocks: clocks {
-						#address-cells = <1>;
-						#size-cells = <0>;
-					};
-				};
-
-				wkup_m3_ipc: wkup_m3_ipc@1324 {
-					compatible = "ti,am4372-wkup-m3-ipc";
-					reg = <0x1324 0x44>;
-					interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-					ti,rproc = <&wkup_m3>;
-					mboxes = <&mailbox &mbox_wkupm3>;
-				};
-
-				edma_xbar: dma-router@f90 {
-					compatible = "ti,am335x-edma-crossbar";
-					reg = <0xf90 0x40>;
-					#dma-cells = <3>;
-					dma-requests = <64>;
-					dma-masters = <&edma>;
-				};
-
-				scm_clockdomains: clockdomains {
-				};
-			};
-		};
-
-		emif: emif@4c000000 {
-			compatible = "ti,emif-am4372";
-			reg = <0x4c000000 0x1000000>;
-			ti,hwmods = "emif";
-		};
-
-		edma: edma@49000000 {
-			compatible = "ti,edma3-tpcc";
-			ti,hwmods = "tpcc";
-			reg =	<0x49000000 0x10000>;
-			reg-names = "edma3_cc";
-			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_ccint", "edma3_mperr",
-					  "edma3_ccerrint";
-			dma-requests = <64>;
-			#dma-cells = <2>;
-
-			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
-				   <&edma_tptc2 0>;
-
-			ti,edma-memcpy-channels = <58 59>;
-		};
-
-		edma_tptc0: tptc@49800000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc0";
-			reg =	<0x49800000 0x100000>;
-			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_tcerrint";
-		};
-
-		edma_tptc1: tptc@49900000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc1";
-			reg =	<0x49900000 0x100000>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_tcerrint";
-		};
-
-		edma_tptc2: tptc@49a00000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc2";
-			reg =	<0x49a00000 0x100000>;
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_tcerrint";
-		};
-
-		uart0: serial@44e09000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x44e09000 0x2000>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart1";
-		};
-
-		uart1: serial@48022000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x48022000 0x2000>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart2";
-			status = "disabled";
-		};
-
-		uart2: serial@48024000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x48024000 0x2000>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart3";
-			status = "disabled";
-		};
-
-		uart3: serial@481a6000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x481a6000 0x2000>;
-			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart4";
-			status = "disabled";
-		};
-
-		uart4: serial@481a8000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x481a8000 0x2000>;
-			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart5";
-			status = "disabled";
-		};
-
-		uart5: serial@481aa000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x481aa000 0x2000>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart6";
-			status = "disabled";
-		};
-
-		mailbox: mailbox@480C8000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x480C8000 0x200>;
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <8>;
-			mbox_wkupm3: wkup_m3 {
-				ti,mbox-send-noirq;
-				ti,mbox-tx = <0 0 0>;
-				ti,mbox-rx = <0 0 3>;
-			};
-		};
-
-		timer1: timer@44e31000 {
-			compatible = "ti,am4372-timer-1ms","ti,am335x-timer-1ms";
-			reg = <0x44e31000 0x400>;
-			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-alwon;
-			ti,hwmods = "timer1";
-		};
-
-		timer2: timer@48040000  {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48040000  0x400>;
-			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer2";
-		};
-
-		timer3: timer@48042000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48042000 0x400>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer3";
-			status = "disabled";
-		};
-
-		timer4: timer@48044000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48044000 0x400>;
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-pwm;
-			ti,hwmods = "timer4";
-			status = "disabled";
-		};
-
-		timer5: timer@48046000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48046000 0x400>;
-			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-pwm;
-			ti,hwmods = "timer5";
-			status = "disabled";
-		};
-
-		timer6: timer@48048000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48048000 0x400>;
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-pwm;
-			ti,hwmods = "timer6";
-			status = "disabled";
-		};
-
-		timer7: timer@4804a000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x4804a000 0x400>;
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-pwm;
-			ti,hwmods = "timer7";
-			status = "disabled";
-		};
-
-		timer8: timer@481c1000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x481c1000 0x400>;
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer8";
-			status = "disabled";
-		};
-
-		timer9: timer@4833d000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x4833d000 0x400>;
-			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer9";
-			status = "disabled";
-		};
-
-		timer10: timer@4833f000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x4833f000 0x400>;
-			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer10";
-			status = "disabled";
-		};
-
-		timer11: timer@48341000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48341000 0x400>;
-			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer11";
-			status = "disabled";
-		};
-
-		counter32k: counter@44e86000 {
-			compatible = "ti,am4372-counter32k","ti,omap-counter32k";
-			reg = <0x44e86000 0x40>;
-			ti,hwmods = "counter_32k";
-		};
-
-		rtc: rtc@44e3e000 {
-			compatible = "ti,am4372-rtc", "ti,am3352-rtc",
-				     "ti,da830-rtc";
-			reg = <0x44e3e000 0x1000>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "rtc";
-			clocks = <&clk_32768_ck>;
-			clock-names = "int-clk";
-			status = "disabled";
-		};
-
-		wdt: wdt@44e35000 {
-			compatible = "ti,am4372-wdt","ti,omap3-wdt";
-			reg = <0x44e35000 0x1000>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "wd_timer2";
-		};
-
-		gpio0: gpio@44e07000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x44e07000 0x1000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio1";
-			status = "disabled";
-		};
-
-		gpio1: gpio@4804c000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x4804c000 0x1000>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio2";
-			status = "disabled";
-		};
-
-		gpio2: gpio@481ac000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x481ac000 0x1000>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio3";
-			status = "disabled";
-		};
-
-		gpio3: gpio@481ae000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x481ae000 0x1000>;
-			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio4";
-			status = "disabled";
-		};
-
-		gpio4: gpio@48320000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x48320000 0x1000>;
-			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio5";
-			status = "disabled";
-		};
-
-		gpio5: gpio@48322000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x48322000 0x1000>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio6";
-			status = "disabled";
-		};
-
-		hwspinlock: spinlock@480ca000 {
-			compatible = "ti,omap4-hwspinlock";
-			reg = <0x480ca000 0x1000>;
-			ti,hwmods = "spinlock";
-			#hwlock-cells = <1>;
-		};
-
-		i2c0: i2c@44e0b000 {
-			compatible = "ti,am4372-i2c","ti,omap4-i2c";
-			reg = <0x44e0b000 0x1000>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "i2c1";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@4802a000 {
-			compatible = "ti,am4372-i2c","ti,omap4-i2c";
-			reg = <0x4802a000 0x1000>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "i2c2";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@4819c000 {
-			compatible = "ti,am4372-i2c","ti,omap4-i2c";
-			reg = <0x4819c000 0x1000>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "i2c3";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi0: spi@48030000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x48030000 0x400>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi0";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mmc1: mmc@48060000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x48060000 0x1000>;
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			ti,needs-special-reset;
-			dmas = <&edma 24 0>,
-				<&edma 25 0>;
-			dma-names = "tx", "rx";
-			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		mmc2: mmc@481d8000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x481d8000 0x1000>;
-			ti,hwmods = "mmc2";
-			ti,needs-special-reset;
-			dmas = <&edma 2 0>,
-				<&edma 3 0>;
-			dma-names = "tx", "rx";
-			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		mmc3: mmc@47810000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x47810000 0x1000>;
-			ti,hwmods = "mmc3";
-			ti,needs-special-reset;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		spi1: spi@481a0000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x481a0000 0x400>;
-			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi1";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi2: spi@481a2000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x481a2000 0x400>;
-			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi2";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi3: spi@481a4000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x481a4000 0x400>;
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi3";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi4: spi@48345000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x48345000 0x400>;
-			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi4";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mac: ethernet@4a100000 {
-			compatible = "ti,am4372-cpsw","ti,cpsw";
-			reg = <0x4a100000 0x800
-			       0x4a101200 0x100>;
-			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ti,hwmods = "cpgmac0";
-			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>,
-				 <&dpll_clksel_mac_clk>;
-			clock-names = "fck", "cpts", "50mclk";
-			assigned-clocks = <&dpll_clksel_mac_clk>;
-			assigned-clock-rates = <50000000>;
-			status = "disabled";
-			cpdma_channels = <8>;
-			ale_entries = <1024>;
-			bd_ram_size = <0x2000>;
-			mac_control = <0x20>;
-			slaves = <2>;
-			active_slave = <0>;
-			cpts_clock_mult = <0x80000000>;
-			cpts_clock_shift = <29>;
-			ranges;
-			syscon = <&scm_conf>;
-
-			davinci_mdio: mdio@4a101000 {
-				compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio";
-				reg = <0x4a101000 0x100>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,hwmods = "davinci_mdio";
-				bus_freq = <1000000>;
-				status = "disabled";
-			};
-
-			cpsw_emac0: slave@4a100200 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			cpsw_emac1: slave@4a100300 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			phy_sel: cpsw-phy-sel@44e10650 {
-				compatible = "ti,am43xx-cpsw-phy-sel";
-				reg= <0x44e10650 0x4>;
-				reg-names = "gmii-sel";
-			};
-		};
-
-		epwmss0: epwmss@48300000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48300000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss0";
-			status = "disabled";
-
-			ecap0: ecap@48300100 {
-				compatible = "ti,am4372-ecap",
-					     "ti,am3352-ecap",
-					     "ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48300100 0x80>;
-				clocks = <&l4ls_gclk>;
-				clock-names = "fck";
-				status = "disabled";
-			};
-
-			ehrpwm0: pwm@48300200 {
-				compatible = "ti,am4372-ehrpwm",
-					     "ti,am3352-ehrpwm",
-					     "ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48300200 0x80>;
-				clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
-				clock-names = "tbclk", "fck";
-				status = "disabled";
-			};
-		};
-
-		epwmss1: epwmss@48302000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48302000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss1";
-			status = "disabled";
-
-			ecap1: ecap@48302100 {
-				compatible = "ti,am4372-ecap",
-					     "ti,am3352-ecap",
-					     "ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48302100 0x80>;
-				clocks = <&l4ls_gclk>;
-				clock-names = "fck";
-				status = "disabled";
-			};
-
-			ehrpwm1: pwm@48302200 {
-				compatible = "ti,am4372-ehrpwm",
-					     "ti,am3352-ehrpwm",
-					     "ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48302200 0x80>;
-				clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
-				clock-names = "tbclk", "fck";
-				status = "disabled";
-			};
-		};
-
-		epwmss2: epwmss@48304000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48304000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss2";
-			status = "disabled";
-
-			ecap2: ecap@48304100 {
-				compatible = "ti,am4372-ecap",
-					     "ti,am3352-ecap",
-					     "ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48304100 0x80>;
-				clocks = <&l4ls_gclk>;
-				clock-names = "fck";
-				status = "disabled";
-			};
-
-			ehrpwm2: pwm@48304200 {
-				compatible = "ti,am4372-ehrpwm",
-					     "ti,am3352-ehrpwm",
-					     "ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48304200 0x80>;
-				clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
-				clock-names = "tbclk", "fck";
-				status = "disabled";
-			};
-		};
-
-		epwmss3: epwmss@48306000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48306000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss3";
-			status = "disabled";
-
-			ehrpwm3: pwm@48306200 {
-				compatible = "ti,am4372-ehrpwm",
-					     "ti,am3352-ehrpwm",
-					     "ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48306200 0x80>;
-				clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>;
-				clock-names = "tbclk", "fck";
-				status = "disabled";
-			};
-		};
-
-		epwmss4: epwmss@48308000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48308000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss4";
-			status = "disabled";
-
-			ehrpwm4: pwm@48308200 {
-				compatible = "ti,am4372-ehrpwm",
-					     "ti,am3352-ehrpwm",
-					     "ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48308200 0x80>;
-				clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>;
-				clock-names = "tbclk", "fck";
-				status = "disabled";
-			};
-		};
-
-		epwmss5: epwmss@4830a000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x4830a000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss5";
-			status = "disabled";
-
-			ehrpwm5: pwm@4830a200 {
-				compatible = "ti,am4372-ehrpwm",
-					     "ti,am3352-ehrpwm",
-					     "ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x4830a200 0x80>;
-				clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>;
-				clock-names = "tbclk", "fck";
-				status = "disabled";
-			};
-		};
-
-		tscadc: tscadc@44e0d000 {
-			compatible = "ti,am3359-tscadc";
-			reg = <0x44e0d000 0x1000>;
-			ti,hwmods = "adc_tsc";
-			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&adc_tsc_fck>;
-			clock-names = "fck";
-			status = "disabled";
-			dmas = <&edma 53 0>, <&edma 57 0>;
-			dma-names = "fifo0", "fifo1";
-
-			tsc {
-				compatible = "ti,am3359-tsc";
-			};
-
-			adc {
-				#io-channel-cells = <1>;
-				compatible = "ti,am3359-adc";
-			};
-
-		};
-
-		sham: sham@53100000 {
-			compatible = "ti,omap5-sham";
-			ti,hwmods = "sham";
-			reg = <0x53100000 0x300>;
-			dmas = <&edma 36 0>;
-			dma-names = "rx";
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		aes: aes@53501000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes";
-			reg = <0x53501000 0xa0>;
-			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 6 0>,
-				<&edma 5 0>;
-			dma-names = "tx", "rx";
-		};
-
-		des: des@53701000 {
-			compatible = "ti,omap4-des";
-			ti,hwmods = "des";
-			reg = <0x53701000 0xa0>;
-			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 34 0>,
-				<&edma 33 0>;
-			dma-names = "tx", "rx";
-		};
-
-		rng: rng@48310000 {
-			compatible = "ti,omap4-rng";
-			ti,hwmods = "rng";
-			reg = <0x48310000 0x2000>;
-			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		mcasp0: mcasp@48038000 {
-			compatible = "ti,am33xx-mcasp-audio";
-			ti,hwmods = "mcasp0";
-			reg = <0x48038000 0x2000>,
-			      <0x46000000 0x400000>;
-			reg-names = "mpu", "dat";
-			interrupts = <80>, <81>;
-			interrupt-names = "tx", "rx";
-			status = "disabled";
-			dmas = <&edma 8 2>,
-			       <&edma 9 2>;
-			dma-names = "tx", "rx";
-		};
-
-		mcasp1: mcasp@4803C000 {
-			compatible = "ti,am33xx-mcasp-audio";
-			ti,hwmods = "mcasp1";
-			reg = <0x4803C000 0x2000>,
-			      <0x46400000 0x400000>;
-			reg-names = "mpu", "dat";
-			interrupts = <82>, <83>;
-			interrupt-names = "tx", "rx";
-			status = "disabled";
-			dmas = <&edma 10 2>,
-			       <&edma 11 2>;
-			dma-names = "tx", "rx";
-		};
-
-		elm: elm@48080000 {
-			compatible = "ti,am3352-elm";
-			reg = <0x48080000 0x2000>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "elm";
-			clocks = <&l4ls_gclk>;
-			clock-names = "fck";
-			status = "disabled";
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,am3352-gpmc";
-			ti,hwmods = "gpmc";
-			dmas = <&edma 52 0>;
-			dma-names = "rxtx";
-			clocks = <&l3s_gclk>;
-			clock-names = "fck";
-			reg = <0x50000000 0x2000>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			gpmc,num-cs = <7>;
-			gpmc,num-waitpins = <2>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			status = "disabled";
-		};
-
-		ocp2scp0: ocp2scp@483a8000 {
-			compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "ocp2scp0";
-
-			usb2_phy1: phy@483a8000 {
-				compatible = "ti,am437x-usb2";
-				reg = <0x483a8000 0x8000>;
-				syscon-phy-power = <&scm_conf 0x620>;
-				clocks = <&usb_phy0_always_on_clk32k>,
-					 <&usb_otg_ss0_refclk960m>;
-				clock-names = "wkupclk", "refclk";
-				#phy-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		ocp2scp1: ocp2scp@483e8000 {
-			compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "ocp2scp1";
-
-			usb2_phy2: phy@483e8000 {
-				compatible = "ti,am437x-usb2";
-				reg = <0x483e8000 0x8000>;
-				syscon-phy-power = <&scm_conf 0x628>;
-				clocks = <&usb_phy1_always_on_clk32k>,
-					 <&usb_otg_ss1_refclk960m>;
-				clock-names = "wkupclk", "refclk";
-				#phy-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		dwc3_1: omap_dwc3@48380000 {
-			compatible = "ti,am437x-dwc3";
-			ti,hwmods = "usb_otg_ss0";
-			reg = <0x48380000 0x10000>;
-			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			utmi-mode = <1>;
-			ranges;
-
-			usb1: usb@48390000 {
-				compatible = "synopsys,dwc3";
-				reg = <0x48390000 0x10000>;
-				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "peripheral",
-						  "host",
-						  "otg";
-				phys = <&usb2_phy1>;
-				phy-names = "usb2-phy";
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
-				status = "disabled";
-				snps,dis_u3_susphy_quirk;
-				snps,dis_u2_susphy_quirk;
-			};
-		};
-
-		dwc3_2: omap_dwc3@483c0000 {
-			compatible = "ti,am437x-dwc3";
-			ti,hwmods = "usb_otg_ss1";
-			reg = <0x483c0000 0x10000>;
-			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			utmi-mode = <1>;
-			ranges;
-
-			usb2: usb@483d0000 {
-				compatible = "synopsys,dwc3";
-				reg = <0x483d0000 0x10000>;
-				interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "peripheral",
-						  "host",
-						  "otg";
-				phys = <&usb2_phy2>;
-				phy-names = "usb2-phy";
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
-				status = "disabled";
-				snps,dis_u3_susphy_quirk;
-				snps,dis_u2_susphy_quirk;
-			};
-		};
-
-		qspi: qspi@47900000 {
-			compatible = "ti,am4372-qspi";
-			reg = <0x47900000 0x100>,
-			      <0x30000000 0x4000000>;
-			reg-names = "qspi_base", "qspi_mmap";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "qspi";
-			interrupts = <0 138 0x4>;
-			num-cs = <4>;
-			status = "disabled";
-		};
-
-		hdq: hdq@48347000 {
-			compatible = "ti,am4372-hdq";
-			reg = <0x48347000 0x1000>;
-			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&func_12m_clk>;
-			clock-names = "fck";
-			ti,hwmods = "hdq1w";
-			status = "disabled";
-		};
-
-		dss: dss@4832a000 {
-			compatible = "ti,omap3-dss";
-			reg = <0x4832a000 0x200>;
-			status = "disabled";
-			ti,hwmods = "dss_core";
-			clocks = <&disp_clk>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			dispc: dispc@4832a400 {
-				compatible = "ti,omap3-dispc";
-				reg = <0x4832a400 0x400>;
-				interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-				ti,hwmods = "dss_dispc";
-				clocks = <&disp_clk>;
-				clock-names = "fck";
-			};
-
-			rfbi: rfbi@4832a800 {
-				compatible = "ti,omap3-rfbi";
-				reg = <0x4832a800 0x100>;
-				ti,hwmods = "dss_rfbi";
-				clocks = <&disp_clk>;
-				clock-names = "fck";
-				status = "disabled";
-			};
-		};
-
-		ocmcram: ocmcram@40300000 {
-			compatible = "mmio-sram";
-			reg = <0x40300000 0x40000>; /* 256k */
-		};
-
-		dcan0: can@481cc000 {
-			compatible = "ti,am4372-d_can", "ti,am3352-d_can";
-			ti,hwmods = "d_can0";
-			clocks = <&dcan0_fck>;
-			clock-names = "fck";
-			reg = <0x481cc000 0x2000>;
-			syscon-raminit = <&scm_conf 0x644 0>;
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		dcan1: can@481d0000 {
-			compatible = "ti,am4372-d_can", "ti,am3352-d_can";
-			ti,hwmods = "d_can1";
-			clocks = <&dcan1_fck>;
-			clock-names = "fck";
-			reg = <0x481d0000 0x2000>;
-			syscon-raminit = <&scm_conf 0x644 1>;
-			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		vpfe0: vpfe@48326000 {
-			compatible = "ti,am437x-vpfe";
-			reg = <0x48326000 0x2000>;
-			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "vpfe0";
-			status = "disabled";
-		};
-
-		vpfe1: vpfe@48328000 {
-			compatible = "ti,am437x-vpfe";
-			reg = <0x48328000 0x2000>;
-			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "vpfe1";
-			status = "disabled";
-		};
-	};
-};
-
-/include/ "am43xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
deleted file mode 100644
index 54f40f370011..000000000000
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ /dev/null
@@ -1,797 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* AM43x EPOS EVM */
-
-/dts-v1/;
-
-#include "am4372.dtsi"
-#include <dt-bindings/pinctrl/am43xx.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/sound/tlv320aic31xx-micbias.h>
-
-/ {
-	model = "TI AM43x EPOS EVM";
-	compatible = "ti,am43x-epos-evm","ti,am438x","ti,am43";
-
-	aliases {
-		display0 = &lcd0;
-	};
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	vmmcsd_fixed: fixedregulator-sd {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-	};
-
-	vbat: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	lcd0: display {
-		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
-		label = "lcd";
-
-		panel-timing {
-			clock-frequency = <33000000>;
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <210>;
-			hback-porch = <16>;
-			hsync-len = <30>;
-			vback-porch = <10>;
-			vfront-porch = <22>;
-			vsync-len = <13>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-
-	matrix_keypad: matrix_keypad0 {
-		compatible = "gpio-matrix-keypad";
-		debounce-delay-ms = <5>;
-		col-scan-delay-us = <2>;
-
-		row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH		/* Bank0, pin12 */
-			     &gpio0 13 GPIO_ACTIVE_HIGH		/* Bank0, pin13 */
-			     &gpio0 14 GPIO_ACTIVE_HIGH		/* Bank0, pin14 */
-			     &gpio0 15 GPIO_ACTIVE_HIGH>;	/* Bank0, pin15 */
-
-		col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH		/* Bank3, pin9 */
-			     &gpio3 10 GPIO_ACTIVE_HIGH		/* Bank3, pin10 */
-			     &gpio2 18 GPIO_ACTIVE_HIGH		/* Bank2, pin18 */
-			     &gpio2 19 GPIO_ACTIVE_HIGH>;	/* Bank2, pin19 */
-
-		linux,keymap = <0x00000201	/* P1 */
-			0x01000204	/* P4 */
-			0x02000207	/* P7 */
-			0x0300020a	/* NUMERIC_STAR */
-			0x00010202	/* P2 */
-			0x01010205	/* P5 */
-			0x02010208	/* P8 */
-			0x03010200	/* P0 */
-			0x00020203	/* P3 */
-			0x01020206	/* P6 */
-			0x02020209	/* P9 */
-			0x0302020b	/* NUMERIC_POUND */
-			0x00030067	/* UP */
-			0x0103006a	/* RIGHT */
-			0x0203006c	/* DOWN */
-			0x03030069>;	/* LEFT */
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
-
-	sound0: sound0 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "AM43-EPOS-EVM";
-		simple-audio-card,widgets =
-			"Microphone", "Microphone Jack",
-			"Headphone", "Headphone Jack",
-			"Speaker", "Speaker";
-		simple-audio-card,routing =
-			"MIC1LP", "Microphone Jack",
-			"MIC1RP", "Microphone Jack",
-			"MIC1LP", "MICBIAS",
-			"MIC1RP", "MICBIAS",
-			"Headphone Jack", "HPL",
-			"Headphone Jack", "HPR",
-			"Speaker", "SPL",
-			"Speaker", "SPR";
-		simple-audio-card,format = "dsp_b";
-		simple-audio-card,bitclock-master = <&sound0_master>;
-		simple-audio-card,frame-master = <&sound0_master>;
-		simple-audio-card,bitclock-inversion;
-
-		simple-audio-card,cpu {
-			sound-dai = <&mcasp1>;
-			system-clock-frequency = <12000000>;
-		};
-
-		sound0_master: simple-audio-card,codec {
-			sound-dai = <&tlv320aic3111>;
-			system-clock-frequency = <12000000>;
-		};
-	};
-};
-
-&am43xx_pinmux {
-		cpsw_default: cpsw_default {
-			pinctrl-single,pins = <
-				/* Slave 1 */
-				AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs */
-				AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
-				AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
-				AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxdv.rmii1_rxdv */
-				AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
-				AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
-				AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
-				AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
-				AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
-			>;
-		};
-
-		cpsw_sleep: cpsw_sleep {
-			pinctrl-single,pins = <
-				/* Slave 1 reset value */
-				AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		davinci_mdio_default: davinci_mdio_default {
-			pinctrl-single,pins = <
-				/* MDIO */
-				AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-				AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-			>;
-		};
-
-		davinci_mdio_sleep: davinci_mdio_sleep {
-			pinctrl-single,pins = <
-				/* MDIO reset value */
-				AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		i2c0_pins: pinmux_i2c0_pins {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-				AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-			>;
-		};
-
-		nand_flash_x8: nand_flash_x8 {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.SELQSPIorNAND/GPIO */
-				AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-				AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-				AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-				AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-				AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-				AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-				AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-				AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-				AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-				AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
-				AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-				AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-				AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-				AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-				AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-			>;
-		};
-
-		ecap0_pins: backlight_pins {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x964, MUX_MODE0)         /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
-			>;
-		};
-
-		i2c2_pins: pinmux_i2c2_pins {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_sda.i2c2_sda */
-				AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_scl.i2c2_scl */
-			>;
-		};
-
-		spi0_pins: pinmux_spi0_pins {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0)           /* spi0_clk.spi0_clk */
-				AM4372_IOPAD(0x954, PIN_OUTPUT | MUX_MODE0)           /* spi0_d0.spi0_d0 */
-				AM4372_IOPAD(0x958, PIN_INPUT | MUX_MODE0)           /* spi0_d1.spi0_d1 */
-				AM4372_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE0)          /* spi0_cs0.spi0_cs0 */
-			>;
-		};
-
-		spi1_pins: pinmux_spi1_pins {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x990, PIN_INPUT | MUX_MODE3)           /* mcasp0_aclkx.spi1_clk */
-				AM4372_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3)           /* mcasp0_fsx.spi1_d0 */
-				AM4372_IOPAD(0x998, PIN_INPUT | MUX_MODE3)           /* mcasp0_axr0.spi1_d1 */
-				AM4372_IOPAD(0x99c, PIN_OUTPUT | MUX_MODE3)          /* mcasp0_ahclkr.spi1_cs0 */
-			>;
-		};
-
-		mmc1_pins: pinmux_mmc1_pins {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-			>;
-		};
-
-		qspi1_default: qspi1_default {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x87c, PIN_INPUT_PULLUP | MUX_MODE3)
-				AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE2)
-				AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3)
-				AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3)
-				AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3)
-				AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3)
-			>;
-		};
-
-		pixcir_ts_pins: pixcir_ts_pins {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
-			>;
-		};
-
-		hdq_pins: pinmux_hdq_pins {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0xa34, PIN_INPUT_PULLUP | MUX_MODE1)    /* cam1_wen.hdq_gpio */
-			>;
-		};
-
-		dss_pins: dss_pins {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
-				AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
-				AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
-				AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
-				AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
-				AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
-				AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
-				AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
-				AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
-				AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8B8, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
-				AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
-				AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
-				AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
-				AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
-				AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
-			>;
-		};
-
-		display_mux_pins: display_mux_pins {
-			pinctrl-single,pins = <
-				/* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
-				AM4372_IOPAD(0x88C, PIN_OUTPUT_PULLUP | MUX_MODE7)
-			>;
-		};
-
-		vpfe1_pins_default: vpfe1_pins_default {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0 */
-				AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0 */
-				AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0 */
-				AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0 */
-				AM4372_IOPAD(0x9dc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0 */
-				AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0 */
-				AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0 */
-				AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0 */
-				AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0 */
-				AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0 */
-				AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0 */
-				AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0 */
-				AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0 */
-			>;
-		};
-
-		vpfe1_pins_sleep: vpfe1_pins_sleep {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			>;
-		};
-
-		mcasp1_pins: mcasp1_pins {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
-				AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */
-				AM4372_IOPAD(0x9a8, PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */
-				AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */
-			>;
-		};
-
-		mcasp1_sleep_pins: mcasp1_sleep_pins {
-			pinctrl-single,pins = <
-				AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
-				AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <16>;
-	phy-mode = "rmii";
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rmii";
-};
-
-&phy_sel {
-	rmii-clock-ext;
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
-
-	tps65218: tps65218@24 {
-		reg = <0x24>;
-		compatible = "ti,tps65218";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		dcdc1: regulator-dcdc1 {
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1144000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc2: regulator-dcdc2 {
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1378000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3: regulator-dcdc3 {
-			regulator-name = "vdcdc3";
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc4: regulator-dcdc4 {
-			regulator-name = "vdcdc4";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc5: regulator-dcdc5 {
-			regulator-name = "v1_0bat";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-		};
-
-		dcdc6: regulator-dcdc6 {
-			regulator-name = "v1_8bat";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		ldo1: regulator-ldo1 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-
-	at24@50 {
-		compatible = "atmel,24c256";
-		pagesize = <64>;
-		reg = <0x50>;
-	};
-
-	pixcir_ts@5c {
-		compatible = "pixcir,pixcir_tangoc";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pixcir_ts_pins>;
-		reg = <0x5c>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
-
-		attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
-
-		touchscreen-size-x = <1024>;
-		touchscreen-size-y = <600>;
-	};
-
-	tlv320aic3111: tlv320aic3111@18 {
-		#sound-dai-cells = <0>;
-		compatible = "ti,tlv320aic3111";
-		reg = <0x18>;
-		status = "okay";
-
-		ai31xx-micbias-vg = <MICBIAS_2_0V>;
-
-		/* Regulators */
-		HPVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
-		SPRVDD-supply = <&vbat>; /* vbat */
-		SPLVDD-supply = <&vbat>; /* vbat */
-		AVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
-		IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */
-		DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-	status = "okay";
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&gpio2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&display_mux_pins>;
-	status = "okay";
-
-	p1 {
-		/*
-		 * SelLCDorHDMI selects between display and audio paths:
-		 * Low: HDMI display with audio via HDMI
-		 * High: LCD display with analog audio via aic3111 codec
-		 */
-		gpio-hog;
-		gpios = <1 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "SelLCDorHDMI";
-	};
-};
-
-&gpio3 {
-	status = "okay";
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	status = "okay";	/* Disable QSPI when enabling GPMC (NAND) */
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_flash_x8>;
-	ranges = <0 0 0x08000000 0x01000000>;	/* CS0 space. Min partition = 16MB */
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>;	/* gpmc_wait0 */
-		ti,nand-ecc-opt = "bch16";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <40>; /* tCEA + tCHZ + 1 */
-		gpmc,cs-wr-off-ns = <40>;
-		gpmc,adv-on-ns = <0>;  /* cs-on-ns */
-		gpmc,adv-rd-off-ns = <25>; /* min( tALH + tALS + 1) */
-		gpmc,adv-wr-off-ns = <25>; /* min( tALH + tALS + 1) */
-		gpmc,we-on-ns = <0>;   /* cs-on-ns */
-		gpmc,we-off-ns = <20>; /* we-on-time + tWP + 2 */
-		gpmc,oe-on-ns = <3>;  /* cs-on-ns + tRR + 2 */
-		gpmc,oe-off-ns = <30>; /* oe-on-ns + tRP + 2 */
-		gpmc,access-ns = <30>; /* tCEA + 4*/
-		gpmc,rd-cycle-ns = <40>;
-		gpmc,wr-cycle-ns = <40>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		/* All SPL-* partitions are sized to minimal length
-		 * which can be independently programmable. For
-		 * NAND flash this is equal to size of erase-block */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "NAND.SPL";
-			reg = <0x00000000 0x00040000>;
-		};
-		partition@1 {
-			label = "NAND.SPL.backup1";
-			reg = <0x00040000 0x00040000>;
-		};
-		partition@2 {
-			label = "NAND.SPL.backup2";
-			reg = <0x00080000 0x00040000>;
-		};
-		partition@3 {
-			label = "NAND.SPL.backup3";
-			reg = <0x000C0000 0x00040000>;
-		};
-		partition@4 {
-			label = "NAND.u-boot-spl-os";
-			reg = <0x00100000 0x00080000>;
-		};
-		partition@5 {
-			label = "NAND.u-boot";
-			reg = <0x00180000 0x00100000>;
-		};
-		partition@6 {
-			label = "NAND.u-boot-env";
-			reg = <0x00280000 0x00040000>;
-		};
-		partition@7 {
-			label = "NAND.u-boot-env.backup1";
-			reg = <0x002C0000 0x00040000>;
-		};
-		partition@8 {
-			label = "NAND.kernel";
-			reg = <0x00300000 0x00700000>;
-		};
-		partition@9 {
-			label = "NAND.file-system";
-			reg = <0x00a00000 0x1f600000>;
-		};
-	};
-};
-
-&epwmss0 {
-	status = "okay";
-};
-
-&tscadc {
-	status = "okay";
-
-	adc {
-		ti,adc-channels = <0 1 2 3 4 5 6 7>;
-	};
-};
-
-&ecap0 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ecap0_pins>;
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-	status = "okay";
-};
-
-&spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins>;
-	status = "okay";
-};
-
-&usb2_phy1 {
-	status = "okay";
-};
-
-&usb1 {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usb2_phy2 {
-	status = "okay";
-};
-
-&usb2 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&qspi {
-	status = "disabled";	/* Disable GPMC (NAND) when enabling QSPI */
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi1_default>;
-
-	spi-max-frequency = <48000000>;
-	m25p80@0 {
-		compatible = "mx66l51235l";
-		spi-max-frequency = <48000000>;
-		reg = <0>;
-		spi-cpol;
-		spi-cpha;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* MTD partition table.
-		 * The ROM checks the first 512KiB
-		 * for a valid file to boot(XIP).
-		 */
-		partition@0 {
-			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x000080000>;
-		};
-		partition@1 {
-			label = "QSPI.U_BOOT.backup";
-			reg = <0x00080000 0x00080000>;
-		};
-		partition@2 {
-			label = "QSPI.U-BOOT-SPL_OS";
-			reg = <0x00100000 0x00010000>;
-		};
-		partition@3 {
-			label = "QSPI.U_BOOT_ENV";
-			reg = <0x00110000 0x00010000>;
-		};
-		partition@4 {
-			label = "QSPI.U-BOOT-ENV.backup";
-			reg = <0x00120000 0x00010000>;
-		};
-		partition@5 {
-			label = "QSPI.KERNEL";
-			reg = <0x00130000 0x0800000>;
-		};
-		partition@6 {
-			label = "QSPI.FILESYSTEM";
-			reg = <0x00930000 0x36D0000>;
-		};
-	};
-};
-
-&hdq {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdq_pins>;
-};
-
-&dss {
-	status = "ok";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_pins>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&vpfe1 {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&vpfe1_pins_default>;
-	pinctrl-1 = <&vpfe1_pins_sleep>;
-
-	port {
-		vpfe1_ep: endpoint {
-			/* remote-endpoint = <&sensor>; add once we have it */
-			ti,am437x-vpfe-interface = <0>;
-			bus-width = <8>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-		};
-	};
-};
-
-&mcasp1 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&mcasp1_pins>;
-	pinctrl-1 = <&mcasp1_sleep_pins>;
-
-	status = "okay";
-
-	op-mode = <0>;          /* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	/* 4 serializer */
-	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-		1 2 0 0
-	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
-&synctimer_32kclk {
-	assigned-clocks = <&mux_synctimer32k_ck>;
-	assigned-clock-parents = <&clkdiv32k_ick>;
-};
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
deleted file mode 100644
index 430be5829f8f..000000000000
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ /dev/null
@@ -1,872 +0,0 @@
-/*
- * Device Tree Source for AM43xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&scm_clocks {
-	sys_clkin_ck: sys_clkin_ck@40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>;
-		ti,bit-shift = <31>;
-		reg = <0x0040>;
-	};
-
-	crystal_freq_sel_ck: crystal_freq_sel_ck@40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
-		ti,bit-shift = <29>;
-		reg = <0x0040>;
-	};
-
-	sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0040>;
-	};
-
-	adc_tsc_fck: adc_tsc_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan0_fck: dcan0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan1_fck: dcan1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp0_fck: mcasp0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp1_fck: mcasp1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex0_fck: smartreflex0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex1_fck: smartreflex1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sha0_fck: sha0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	aes0_fck: aes0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	rng_fck: rng_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	ehrpwm0_tbclk: ehrpwm0_tbclk@664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <0>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm1_tbclk: ehrpwm1_tbclk@664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <1>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm2_tbclk: ehrpwm2_tbclk@664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <2>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm3_tbclk: ehrpwm3_tbclk@664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <4>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm4_tbclk: ehrpwm4_tbclk@664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <5>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm5_tbclk: ehrpwm5_tbclk@664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <6>;
-		reg = <0x0664>;
-	};
-};
-&prcm_clocks {
-	clk_32768_ck: clk_32768_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	clk_rc32k_ck: clk_rc32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_24000000_ck: virt_24000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	virt_25000000_ck: virt_25000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <25000000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	tclkin_ck: tclkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	dpll_core_ck: dpll_core_ck@2d20 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-core-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2d20>, <0x2d24>, <0x2d2c>;
-	};
-
-	dpll_core_x2_ck: dpll_core_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-x2-clock";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_m4_ck: dpll_core_m4_ck@2d38 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d38>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_m5_ck: dpll_core_m5_ck@2d3c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d3c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_m6_ck: dpll_core_m6_ck@2d40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d40>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_mpu_ck: dpll_mpu_ck@2d60 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2d60>, <0x2d64>, <0x2d6c>;
-	};
-
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck@2d70 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d70>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	mpu_periphclk: mpu_periphclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_mpu_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	dpll_ddr_ck: dpll_ddr_ck@2da0 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2da0>, <0x2da4>, <0x2dac>;
-	};
-
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck@2db0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2db0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_disp_ck: dpll_disp_ck@2e20 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2e20>, <0x2e24>, <0x2e2c>;
-	};
-
-	dpll_disp_m2_ck: dpll_disp_m2_ck@2e30 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_disp_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2e30>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		ti,set-rate-parent;
-	};
-
-	dpll_per_ck: dpll_per_ck@2de0 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-j-type-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2de0>, <0x2de4>, <0x2dec>;
-	};
-
-	dpll_per_m2_ck: dpll_per_m2_ck@2df0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2df0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	clk_24mhz: clk_24mhz {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	clkdiv32k_ck: clkdiv32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&clk_24mhz>;
-		clock-mult = <1>;
-		clock-div = <732>;
-	};
-
-	clkdiv32k_ick: clkdiv32k_ick@2a38 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x2a38>;
-	};
-
-	sysclk_div: sysclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	pruss_ocp_gclk: pruss_ocp_gclk@4248 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysclk_div>, <&dpll_disp_m2_ck>;
-		reg = <0x4248>;
-	};
-
-	clk_32k_tpm_ck: clk_32k_tpm_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	timer1_fck: timer1_fck@4200 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>;
-		reg = <0x4200>;
-	};
-
-	timer2_fck: timer2_fck@4204 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4204>;
-	};
-
-	timer3_fck: timer3_fck@4208 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4208>;
-	};
-
-	timer4_fck: timer4_fck@420c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x420c>;
-	};
-
-	timer5_fck: timer5_fck@4210 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4210>;
-	};
-
-	timer6_fck: timer6_fck@4214 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4214>;
-	};
-
-	timer7_fck: timer7_fck@4218 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4218>;
-	};
-
-	wdt1_fck: wdt1_fck@422c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
-		reg = <0x422c>;
-	};
-
-	l3_gclk: l3_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sysclk_div>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l4hs_gclk: l4hs_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l3s_gclk: l3s_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4ls_gclk: l4ls_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m5_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@4238 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>;
-		reg = <0x4238>;
-	};
-
-	dpll_clksel_mac_clk: dpll_clksel_mac_clk@4234 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_m5_ck>;
-		reg = <0x4234>;
-		ti,bit-shift = <2>;
-		ti,dividers = <2>, <5>;
-	};
-
-	clk_32k_mosc_ck: clk_32k_mosc_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@4240 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>;
-		reg = <0x4240>;
-	};
-
-	gpio0_dbclk: gpio0_dbclk@2b68 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&gpio0_dbclk_mux_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x2b68>;
-	};
-
-	gpio1_dbclk: gpio1_dbclk@8c78 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c78>;
-	};
-
-	gpio2_dbclk: gpio2_dbclk@8c80 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c80>;
-	};
-
-	gpio3_dbclk: gpio3_dbclk@8c88 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c88>;
-	};
-
-	gpio4_dbclk: gpio4_dbclk@8c90 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c90>;
-	};
-
-	gpio5_dbclk: gpio5_dbclk@8c98 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c98>;
-	};
-
-	mmc_clk: mmc_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@423c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysclk_div>, <&dpll_per_m2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x423c>;
-	};
-
-	gfx_fck_div_ck: gfx_fck_div_ck@423c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&gfx_fclk_clksel_ck>;
-		reg = <0x423c>;
-		ti,max-div = <2>;
-	};
-
-	disp_clk: disp_clk@4244 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
-		reg = <0x4244>;
-		ti,set-rate-parent;
-	};
-
-	dpll_extdev_ck: dpll_extdev_ck@2e60 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2e60>, <0x2e64>, <0x2e6c>;
-	};
-
-	dpll_extdev_m2_ck: dpll_extdev_m2_ck@2e70 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_extdev_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2e70>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	mux_synctimer32k_ck: mux_synctimer32k_ck@4230 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>;
-		reg = <0x4230>;
-	};
-
-	synctimer_32kclk: synctimer_32kclk@2a30 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&mux_synctimer32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x2a30>;
-	};
-
-	timer8_fck: timer8_fck@421c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x421c>;
-	};
-
-	timer9_fck: timer9_fck@4220 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x4220>;
-	};
-
-	timer10_fck: timer10_fck@4224 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x4224>;
-	};
-
-	timer11_fck: timer11_fck@4228 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x4228>;
-	};
-
-	cpsw_50m_clkdiv: cpsw_50m_clkdiv {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m5_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	cpsw_5m_clkdiv: cpsw_5m_clkdiv {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&cpsw_50m_clkdiv>;
-		clock-mult = <1>;
-		clock-div = <10>;
-	};
-
-	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-x2-clock";
-		clocks = <&dpll_ddr_ck>;
-	};
-
-	dpll_ddr_m4_ck: dpll_ddr_m4_ck@2db8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2db8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_clkdcoldo: dpll_per_clkdcoldo@2e14 {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&dpll_per_ck>;
-		ti,clock-mult = <1>;
-		ti,clock-div = <1>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2e14>;
-		ti,invert-autoidle-bit;
-	};
-
-	dll_aging_clk_div: dll_aging_clk_div@4250 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin_ck>;
-		reg = <0x4250>;
-		ti,dividers = <8>, <16>, <32>;
-	};
-
-	div_core_25m_ck: div_core_25m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sysclk_div>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	func_12m_clk: func_12m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	vtp_clk_div: vtp_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	usbphy_32khz_clkmux: usbphy_32khz_clkmux@4260 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
-		reg = <0x4260>;
-	};
-
-	usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k@2a40 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&usbphy_32khz_clkmux>;
-		ti,bit-shift = <8>;
-		reg = <0x2a40>;
-	};
-
-	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@2a48 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&usbphy_32khz_clkmux>;
-		ti,bit-shift = <8>;
-		reg = <0x2a48>;
-	};
-
-	usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m@8a60 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_clkdcoldo>;
-		ti,bit-shift = <8>;
-		reg = <0x8a60>;
-	};
-
-	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m@8a68 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_clkdcoldo>;
-		ti,bit-shift = <8>;
-		reg = <0x8a68>;
-	};
-
-	clkout1_osc_div_ck: clkout1_osc_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin_ck>;
-		ti,bit-shift = <20>;
-		ti,max-div = <4>;
-		reg = <0x4100>;
-	};
-
-	clkout1_src2_mux_ck: clkout1_src2_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
-			 <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
-			 <&dpll_mpu_m2_ck>;
-		reg = <0x4100>;
-	};
-
-	clkout1_src2_pre_div_ck: clkout1_src2_pre_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&clkout1_src2_mux_ck>;
-		ti,bit-shift = <4>;
-		ti,max-div = <8>;
-		reg = <0x4100>;
-	};
-
-	clkout1_src2_post_div_ck: clkout1_src2_post_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&clkout1_src2_pre_div_ck>;
-		ti,bit-shift = <8>;
-		ti,max-div = <32>;
-		ti,index-power-of-two;
-		reg = <0x4100>;
-	};
-
-	clkout1_mux_ck: clkout1_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>,
-			 <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>;
-		ti,bit-shift = <16>;
-		reg = <0x4100>;
-	};
-
-	clkout1_ck: clkout1_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkout1_mux_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x4100>;
-	};
-
-	clkout2_src_mux_ck: clkout2_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
-			 <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
-			 <&dpll_mpu_m2_ck>, <&dpll_extdev_ck>;
-		reg = <0x4108>;
-	};
-
-	clkout2_pre_div_ck: clkout2_pre_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&clkout2_src_mux_ck>;
-		ti,bit-shift = <4>;
-		ti,max-div = <8>;
-		reg = <0x4108>;
-	};
-
-	clkout2_post_div_ck: clkout2_post_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&clkout2_pre_div_ck>;
-		ti,bit-shift = <8>;
-		ti,max-div = <32>;
-		ti,index-power-of-two;
-		reg = <0x4108>;
-	};
-
-	clkout2_ck: clkout2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkout2_post_div_ck>;
-		ti,bit-shift = <16>;
-		reg = <0x4108>;
-	};
-};
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
deleted file mode 100644
index 7b207835b2d1..000000000000
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "dra72x.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "am57xx-idk-common.dtsi"
-
-/ {
-	model = "TI AM5718 IDK";
-	compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x40000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		cpu0-led {
-			label = "status0:red:cpu0";
-			gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "cpu0";
-		};
-
-		usr0-led {
-			label = "status0:green:usr";
-			gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		heartbeat-led {
-			label = "status0:blue:heartbeat";
-			gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-
-		usr1-led {
-			label = "status1:red:usr";
-			gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		usr2-led {
-			label = "status1:green:usr";
-			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		mmc0-led {
-			label = "status1:blue:mmc0";
-			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc0";
-		};
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&ldo1_reg>;
-	bus-width = <4>;
-	cd-gpios = <&gpio6 27 0>; /* gpio 219 */
-};
-
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
-&extcon_usb2 {
-	id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
-	vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
-};
-
-&mailbox5 {
-	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
-		status = "okay";
-	};
-};
-
-&mailbox6 {
-	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
-		status = "okay";
-	};
-};
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
deleted file mode 100644
index 9da6d83ca185..000000000000
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "dra74x.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "am57xx-idk-common.dtsi"
-
-/ {
-	model = "TI AM5728 IDK";
-	compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74",
-		     "ti,dra7";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x80000000>;
-	};
-
-	status-leds {
-		compatible = "gpio-leds";
-		cpu0-led {
-			label = "status0:red:cpu0";
-			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "cpu0";
-		};
-
-		usr0-led {
-			label = "status0:green:usr";
-			gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		heartbeat-led {
-			label = "status0:blue:heartbeat";
-			gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-
-		cpu1-led {
-			label = "status1:red:cpu1";
-			gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "cpu1";
-		};
-
-		usr1-led {
-			label = "status1:green:usr";
-			gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		mmc0-led {
-			label = "status1:blue:mmc0";
-			gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc0";
-		};
-	};
-};
-
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
-&extcon_usb2 {
-	id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-	vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&v3_3d>;
-	vmmc_aux-supply = <&ldo1_reg>;
-	bus-width = <4>;
-	cd-gpios = <&gpio6 27 0>; /* gpio 219 */
-};
-
-&sn65hvs882 {
-	load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-};
-
-&pcie1 {
-	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
-&mailbox5 {
-	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
-		status = "okay";
-	};
-};
-
-&mailbox6 {
-	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
-		status = "okay";
-	};
-};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
deleted file mode 100644
index 39a92aff0a0d..000000000000
--- a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "am57xx-beagle-x15-common.dtsi"
-
-/ {
-	model = "TI AM5728 BeagleBoard-X15 rev B1";
-};
-
-&tpd12s015 {
-	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
-		<&gpio2 30 GPIO_ACTIVE_HIGH>,	/* gpio2_30, LS OE */
-		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
-};
-
-&mmc1 {
-	vmmc-supply = <&vdd_3v3>;
-	vmmc-aux-supply = <&ldo1_reg>;
-};
-
-/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
-&phy1 {
-	max-speed = <100>;
-};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
deleted file mode 100644
index 19a60a11c198..000000000000
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "am57xx-beagle-x15-common.dtsi"
-
-/ {
-	/* NOTE: This describes the "original" pre-production A2 revision */
-	model = "TI AM5728 BeagleBoard-X15";
-};
-
-&tpd12s015 {
-	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
-		<&gpio6 28 GPIO_ACTIVE_HIGH>,	/* gpio6_28, LS OE */
-		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
-};
-
-&mmc1 {
-	vmmc-supply = <&ldo1_reg>;
-};
-
-/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
-&phy1 {
-	max-speed = <100>;
-};
diff --git a/arch/arm/boot/dts/amazon/Makefile b/arch/arm/boot/dts/amazon/Makefile
new file mode 100644
index 000000000000..58af5c4846ef
--- /dev/null
+++ b/arch/arm/boot/dts/amazon/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ALPINE) += \
+	alpine-db.dtb
+dtb-$(CONFIG_ARCH_ALPINE) += \
+	alpine-db.dtb
diff --git a/arch/arm/boot/dts/alpine-db.dts b/arch/arm/boot/dts/amazon/alpine-db.dts
index dfb5a0802273..dfb5a0802273 100644
--- a/arch/arm/boot/dts/alpine-db.dts
+++ b/arch/arm/boot/dts/amazon/alpine-db.dts
diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/amazon/alpine.dtsi
index 731df7a8c4e6..90bd12feac01 100644
--- a/arch/arm/boot/dts/alpine.dtsi
+++ b/arch/arm/boot/dts/amazon/alpine.dtsi
@@ -25,12 +25,18 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton64.dtsi"
 
 / {
+	#address-cells = <2>;
+	#size-cells = <2>;
 	/* SOC compatibility */
 	compatible = "al,alpine";
 
+	memory {
+		device_type = "memory";
+		reg = <0 0 0 0>;
+	};
+
 	/* CPU Configuration */
 	cpus {
 		#address-cells = <1>;
@@ -85,7 +91,7 @@
 		};
 
 		/* Interrupt Controller */
-		gic: gic@fb001000 {
+		gic: interrupt-controller@fb001000 {
 			compatible = "arm,cortex-a15-gic";
 			#interrupt-cells = <3>;
 			#size-cells = <0>;
@@ -120,7 +126,7 @@
 				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		uart0: uart@fd883000 {
+		uart0: serial@fd883000 {
 			compatible = "ns16550a";
 			reg = <0x0 0xfd883000 0x0 0x1000>;
 			clock-frequency = <375000000>;
@@ -129,7 +135,7 @@
 			reg-io-width = <4>;
 		};
 
-		uart1: uart@fd884000 {
+		uart1: serial@fd884000 {
 			compatible = "ns16550a";
 			reg = <0x0 0xfd884000 0x0 0x1000>;
 			clock-frequency = <375000000>;
@@ -148,7 +154,7 @@
 			reg = <0x0 0xfbc00000 0x0 0x100000>;
 			interrupt-map-mask = <0xf800 0 0 7>;
 			/* Add legacy interrupts for SATA devices only */
-			interrupt-map =	<0x4000 0 0 1 &gic 0 43 4>,
+			interrupt-map = <0x4000 0 0 1 &gic 0 43 4>,
 					<0x4800 0 0 1 &gic 0 44 4>;
 
 			/* 32 bit non prefetchable memory space */
@@ -161,7 +167,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <96>;
 			al,msi-num-spis = <64>;
diff --git a/arch/arm/boot/dts/amlogic/Makefile b/arch/arm/boot/dts/amlogic/Makefile
new file mode 100644
index 000000000000..3c8a1e88b386
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MACH_MESON8) += \
+	meson8-minix-neo-x8.dtb \
+	meson8-fernsehfee3.dtb \
+	meson8b-ec100.dtb \
+	meson8b-mxq.dtb \
+	meson8b-odroidc1.dtb \
+	meson8m2-mxiii-plus.dtb
diff --git a/arch/arm/boot/dts/amlogic/meson.dtsi b/arch/arm/boot/dts/amlogic/meson.dtsi
new file mode 100644
index 000000000000..28ec2c821cdc
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson.dtsi
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2014 Carlo Caione <carlo@caione.org>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&saradc 8>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		cbus: bus@c1100000 {
+			compatible = "simple-bus";
+			reg = <0xc1100000 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc1100000 0x200000>;
+
+			hhi: system-controller@4000 {
+				compatible = "amlogic,meson-hhi-sysctrl",
+					     "simple-mfd",
+					     "syscon";
+				reg = <0x4000 0x400>;
+			};
+
+			aiu: audio-controller@5400 {
+				compatible = "amlogic,aiu";
+				#sound-dai-cells = <2>;
+				sound-name-prefix = "AIU";
+				reg = <0x5400 0x2ac>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "i2s", "spdif";
+				status = "disabled";
+			};
+
+			assist: assist@7c00 {
+				compatible = "amlogic,meson-mx-assist", "syscon";
+				reg = <0x7c00 0x200>;
+			};
+
+			hwrng: rng@8100 {
+				compatible = "amlogic,meson-rng";
+				reg = <0x8100 0x8>;
+			};
+
+			uart_A: serial@84c0 {
+				compatible = "amlogic,meson6-uart";
+				reg = <0x84c0 0x18>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				fifo-size = <128>;
+				status = "disabled";
+			};
+
+			uart_B: serial@84dc {
+				compatible = "amlogic,meson6-uart";
+				reg = <0x84dc 0x18>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			i2c_A: i2c@8500 {
+				compatible = "amlogic,meson6-i2c";
+				reg = <0x8500 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			pwm_ab: pwm@8550 {
+				compatible = "amlogic,meson-pwm";
+				reg = <0x8550 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@8650 {
+				compatible = "amlogic,meson-pwm";
+				reg = <0x8650 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			saradc: adc@8680 {
+				compatible = "amlogic,meson-saradc";
+				reg = <0x8680 0x34>;
+				#io-channel-cells = <1>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			uart_C: serial@8700 {
+				compatible = "amlogic,meson6-uart";
+				reg = <0x8700 0x18>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			i2c_B: i2c@87c0 {
+				compatible = "amlogic,meson6-i2c";
+				reg = <0x87c0 0x20>;
+				interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			usb0_phy: phy@8800 {
+				compatible = "amlogic,meson-mx-usb2-phy";
+				#phy-cells = <0>;
+				reg = <0x8800 0x20>;
+				status = "disabled";
+			};
+
+			usb1_phy: phy@8820 {
+				compatible = "amlogic,meson-mx-usb2-phy";
+				#phy-cells = <0>;
+				reg = <0x8820 0x20>;
+				status = "disabled";
+			};
+
+			sdio: mmc@8c20 {
+				compatible = "amlogic,meson-mx-sdio";
+				reg = <0x8c20 0x20>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spifc: spi@8c80 {
+				compatible = "amlogic,meson6-spifc";
+				reg = <0x8c80 0x80>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			sdhc: mmc@8e00 {
+				compatible = "amlogic,meson-mx-sdhc";
+				reg = <0x8e00 0x42>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			gpio_intc: interrupt-controller@9880 {
+				compatible = "amlogic,meson-gpio-intc";
+				reg = <0x9880 0x10>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+				status = "disabled";
+			};
+
+			wdt: watchdog@9900 {
+				compatible = "amlogic,meson6-wdt";
+				reg = <0x9900 0x8>;
+				interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			timer_abcde: timer@9940 {
+				compatible = "amlogic,meson6-timer";
+				reg = <0x9940 0x18>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 11 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
+		L2: cache-controller@c4200000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xc4200000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		periph: bus@c4300000 {
+			compatible = "simple-bus";
+			reg = <0xc4300000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc4300000 0x10000>;
+
+			gic: interrupt-controller@1000 {
+				compatible = "arm,cortex-a9-gic";
+				reg = <0x1000 0x1000>,
+				      <0x100 0x100>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+			};
+		};
+
+		aobus: bus@c8100000 {
+			compatible = "simple-bus";
+			reg = <0xc8100000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc8100000 0x100000>;
+
+			ao_arc_rproc: remoteproc@1c {
+				compatible = "amlogic,meson-mx-ao-arc";
+				reg = <0x1c 0x8>, <0x38 0x8>;
+				reg-names = "remap", "cpu";
+				status = "disabled";
+			};
+
+			ir_receiver: ir-receiver@480 {
+				compatible = "amlogic,meson6-ir";
+				reg = <0x480 0x20>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			uart_AO: serial@4c0 {
+				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart";
+				reg = <0x4c0 0x18>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			i2c_AO: i2c@500 {
+				compatible = "amlogic,meson6-i2c";
+				reg = <0x500 0x20>;
+				interrupts = <GIC_SPI 92 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			rtc: rtc@740 {
+				compatible = "amlogic,meson6-rtc";
+				reg = <0x740 0x14>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+			};
+		};
+
+		usb0: usb@c9040000 {
+			compatible = "snps,dwc2";
+			reg = <0xc9040000 0x40000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb0_phy>;
+			phy-names = "usb2-phy";
+			g-rx-fifo-size = <512>;
+			g-np-tx-fifo-size = <500>;
+			g-tx-fifo-size = <256 192 128 128 128>;
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		usb1: usb@c90c0000 {
+			compatible = "snps,dwc2";
+			reg = <0xc90c0000 0x40000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb1_phy>;
+			phy-names = "usb2-phy";
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		ethmac: ethernet@c9410000 {
+			compatible = "amlogic,meson6-dwmac", "snps,dwmac";
+			reg = <0xc9410000 0x10000
+			       0xc1108108 0x4>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		ahb_sram: sram@d9000000 {
+			compatible = "mmio-sram";
+			reg = <0xd9000000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xd9000000 0x20000>;
+		};
+
+		bootrom: bootrom@d9040000 {
+			compatible = "amlogic,meson-mx-bootrom", "syscon";
+			reg = <0xd9040000 0x10000>;
+		};
+
+		secbus: bus@da000000 {
+			compatible = "simple-bus";
+			reg = <0xda000000 0x6000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xda000000 0x6000>;
+
+			efuse: nvmem@0 {
+				compatible = "amlogic,meson6-efuse";
+				reg = <0x0 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+		};
+	};
+
+	thermal_sensor: thermal-sensor {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&saradc 8>;
+		io-channel-names = "sensor-channel";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+}; /* end of / */
diff --git a/arch/arm/boot/dts/amlogic/meson8-fernsehfee3.dts b/arch/arm/boot/dts/amlogic/meson8-fernsehfee3.dts
new file mode 100644
index 000000000000..4e52447d51bd
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8-fernsehfee3.dts
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+// Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+
+#include "meson8.dtsi"
+
+/ {
+	model = "Fernsehfee 3.0";
+	compatible = "tcu,fernsehfee3", "amlogic,meson8";
+
+	aliases {
+		serial0 = &uart_AO;
+		gpiochip0 = &gpio;
+		gpiochip1 = &gpio_ao;
+		i2c0 = &i2c_AO;
+		i2c1 = &i2c_B;
+		mmc0 = &sdhc;
+		mmc1 = &sdio;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;  /* 1 GiB */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "Power button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/*
+			 * The power LED can be turned red, otherwise it is green.
+			 */
+			gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+
+	vcc_5v: regulator-5v {
+		/* 5V rail, always on as long as the system is running */
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-3v3 {
+		/* Chipown AP2420 step-down converter */
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5v>;
+	};
+
+	wifi_3v3: regulator-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V-WIFI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+		gpio = <&gpio GPIOX_11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* IC Plus IP101A (0x02430c54) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_pins>;
+	pinctrl-names = "default";
+
+	pmic@32 {
+		compatible = "ricoh,rn5t618";
+		reg = <0x32>;
+		system-power-controller;
+
+		regulators {
+			vcck: DCDC1 {
+				regulator-name = "VCCK";
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vddee: DCDC2 {
+				/* the output is also used as VDDAO */
+				regulator-name = "VDD_EE";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			DCDC3 {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-name = "VDDIO_AO28";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO2 {
+				regulator-name = "VDDIO_AO18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc1v8_usb: LDO3 {
+				regulator-name = "VCC1V8_USB";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			LDO4 {
+				/* This one appears to be unused */
+				regulator-name = "VCC2V8";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+			};
+
+			LDO5 {
+				regulator-name = "AVDD1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDORTC1 {
+				regulator-name = "VDD_LDO";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2700000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDORTC2 {
+				regulator-name = "RTC_0V9";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom@50 {
+		/* Fairchild FM24C08A */
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+		wp-gpios = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
+		num-addresses = <4>;
+	};
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-0 = <&i2c_b_pins>;
+	pinctrl-names = "default";
+
+	/* TODO: SiI9293 HDMI receiver @ 0x39 */
+};
+
+&mali {
+	mali-supply = <&vddee>;
+};
+
+&sdhc {
+	status = "okay";
+	pinctrl-0 = <&sdxc_c_pins>;
+	pinctrl-names = "default";
+
+	/* eMMC */
+	bus-width = <8>;
+	max-frequency = <100000000>;
+
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	no-sdio;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
+&sdio {
+	status = "okay";
+	pinctrl-0 = <&sd_b_pins>;
+
+	/* SD card */
+	slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+		vmmc-supply = <&vcc_3v3>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&vcc1v8_usb>;
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wifi: wifi@1 {
+		/* Realtek RTL8188 2.4GHz WiFi module */
+		compatible = "usbbda,179";
+		reg = <1>;
+		vdd-supply = <&wifi_3v3>;
+	};
+};
+
+&usb1_phy {
+	status = "okay";
+	phy-supply = <&vcc1v8_usb>;
+};
+
+&ir_receiver {
+	status = "okay";
+	pinctrl-0 = <&ir_recv_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/amlogic/meson8-minix-neo-x8.dts
new file mode 100644
index 000000000000..62987eadc747
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8-minix-neo-x8.dts
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2014 Beniamino Galvani <b.galvani@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "meson8.dtsi"
+
+/ {
+	model = "MINIX NEO-X8";
+	compatible = "minix,neo-x8", "amlogic,meson8";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			label = "x8:blue:power";
+			gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_pins>;
+	pinctrl-names = "default";
+
+	pmic@32 {
+		compatible = "ricoh,rn5t618";
+		reg = <0x32>;
+		system-power-controller;
+
+		regulators {
+		};
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&spifc {
+	status = "okay";
+	pinctrl-0 = <&spi_nor_pins>;
+	pinctrl-names = "default";
+
+	flash@0 {
+		compatible = "mxicy,mx25l1606e";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0 0x100000>;
+		};
+
+		partition@100000 {
+			label = "env";
+			reg = <0x100000 0x10000>;
+		};
+	};
+};
+
+&ir_receiver {
+	status = "okay";
+	pinctrl-0 = <&ir_recv_pins>;
+	pinctrl-names = "default";
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8.dtsi b/arch/arm/boot/dts/amlogic/meson8.dtsi
new file mode 100644
index 000000000000..a609b5a0fda4
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8.dtsi
@@ -0,0 +1,833 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2014 Carlo Caione <carlo@caione.org>
+ */
+
+#include <dt-bindings/clock/meson8-ddr-clkc.h>
+#include <dt-bindings/clock/meson8b-clkc.h>
+#include <dt-bindings/gpio/meson8-gpio.h>
+#include <dt-bindings/power/meson8-power.h>
+#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
+#include <dt-bindings/reset/amlogic,meson8b-reset.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "meson.dtsi"
+
+/ {
+	model = "Amlogic Meson8 SoC";
+	compatible = "amlogic,meson8";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x200>;
+			enable-method = "amlogic,meson8-smp";
+			resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu1: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x201>;
+			enable-method = "amlogic,meson8-smp";
+			resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu2: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x202>;
+			enable-method = "amlogic,meson8-smp";
+			resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu3: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x203>;
+			enable-method = "amlogic,meson8-smp";
+			resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-96000000 {
+			opp-hz = /bits/ 64 <96000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-192000000 {
+			opp-hz = /bits/ 64 <192000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-504000000 {
+			opp-hz = /bits/ 64 <504000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <850000>;
+		};
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <850000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <875000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <925000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <975000>;
+		};
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1025000>;
+		};
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-1800000000 {
+			status = "disabled";
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1125000>;
+		};
+		opp-1992000000 {
+			status = "disabled";
+			opp-hz = /bits/ 64 <1992000000>;
+			opp-microvolt = <1150000>;
+		};
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-182142857 {
+			opp-hz = /bits/ 64 <182142857>;
+			opp-microvolt = <1150000>;
+		};
+		opp-318750000 {
+			opp-hz = /bits/ 64 <318750000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-425000000 {
+			opp-hz = /bits/ 64 <425000000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-510000000 {
+			opp-hz = /bits/ 64 <510000000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-637500000 {
+			opp-hz = /bits/ 64 <637500000>;
+			opp-microvolt = <1150000>;
+			turbo-mode;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* 2 MiB reserved for Hardware ROM Firmware? */
+		hwrom@0 {
+			reg = <0x0 0x200000>;
+			no-map;
+		};
+
+		/*
+		 * 1 MiB reserved for the "ARM Power Firmware": this is ARM
+		 * code which is responsible for system suspend. It loads a
+		 * piece of ARC code ("arc_power" in the vendor u-boot tree)
+		 * into SRAM, executes that and shuts down the (last) ARM core.
+		 * The arc_power firmware then checks various wakeup sources
+		 * (IR remote receiver, HDMI CEC, WIFI and Bluetooth wakeup or
+		 * simply the power key) and re-starts the ARM core once it
+		 * detects a wakeup request.
+		 */
+		power-firmware@4f00000 {
+			reg = <0x4f00000 0x100000>;
+			no-map;
+		};
+	};
+
+	thermal-zones {
+		soc-thermal {
+			polling-delay-passive = <250>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+			thermal-sensors = <&thermal_sensor>;
+
+			cooling-maps {
+				map0 {
+					trip = <&soc_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&soc_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				soc_passive: soc-passive {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				soc_hot: soc-hot {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				soc_critical: soc-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	mmcbus: bus@c8000000 {
+		compatible = "simple-bus";
+		reg = <0xc8000000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xc8000000 0x8000>;
+
+		ddr_clkc: clock-controller@400 {
+			compatible = "amlogic,meson8-ddr-clkc";
+			reg = <0x400 0x20>;
+			clocks = <&xtal>;
+			clock-names = "xtal";
+			#clock-cells = <1>;
+		};
+
+		dmcbus: bus@6000 {
+			compatible = "simple-bus";
+			reg = <0x6000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x400>;
+
+			canvas: video-lut@20 {
+				compatible = "amlogic,meson8-canvas",
+					     "amlogic,canvas";
+				reg = <0x20 0x14>;
+			};
+		};
+	};
+
+	apb: bus@d0000000 {
+		compatible = "simple-bus";
+		reg = <0xd0000000 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xd0000000 0x200000>;
+
+		mali: gpu@c0000 {
+			compatible = "amlogic,meson8-mali", "arm,mali-450";
+			reg = <0xc0000 0x40000>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp", "gpmmu", "pp", "pmu",
+					  "pp0", "ppmmu0", "pp1", "ppmmu1",
+					  "pp2", "ppmmu2", "pp4", "ppmmu4",
+					  "pp5", "ppmmu5", "pp6", "ppmmu6";
+			resets = <&reset RESET_MALI>;
+
+			clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+			clock-names = "bus", "core";
+
+			assigned-clocks = <&clkc CLKID_MALI>;
+			assigned-clock-rates = <318750000>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+}; /* end of / */
+
+&aiu {
+	compatible = "amlogic,aiu-meson8", "amlogic,aiu";
+	clocks = <&clkc CLKID_AIU_GLUE>,
+		 <&clkc CLKID_I2S_OUT>,
+		 <&clkc CLKID_AOCLK_GATE>,
+		 <&clkc CLKID_CTS_AMCLK>,
+		 <&clkc CLKID_MIXER_IFACE>,
+		 <&clkc CLKID_IEC958>,
+		 <&clkc CLKID_IEC958_GATE>,
+		 <&clkc CLKID_CTS_MCLK_I958>,
+		 <&clkc CLKID_CTS_I958>;
+	clock-names = "pclk",
+		      "i2s_pclk",
+		      "i2s_aoclk",
+		      "i2s_mclk",
+		      "i2s_mixer",
+		      "spdif_pclk",
+		      "spdif_aoclk",
+		      "spdif_mclk",
+		      "spdif_mclk_sel";
+	resets = <&reset RESET_AIU>;
+};
+
+&aobus {
+	pmu: pmu@e0 {
+		compatible = "amlogic,meson8-pmu", "syscon";
+		reg = <0xe0 0x18>;
+	};
+
+	pinctrl_aobus: pinctrl@14 {
+		compatible = "amlogic,meson8-aobus-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x14 0x1c>;
+
+		gpio_ao: bank@0 {
+			reg = <0x0 0x4>,
+			      <0x18 0x4>,
+			      <0x10 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aobus 0 0 16>;
+		};
+
+		i2s_am_clk_pins: i2s-am-clk-out {
+			mux {
+				groups = "i2s_am_clk_out_ao";
+				function = "i2s_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ao_clk_pins: i2s-ao-clk-out {
+			mux {
+				groups = "i2s_ao_clk_out_ao";
+				function = "i2s_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_lr_clk_pins: i2s-lr-clk-out {
+			mux {
+				groups = "i2s_lr_clk_out_ao";
+				function = "i2s_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch01_ao_pins: i2s-out-ch01 {
+			mux {
+				groups = "i2s_out_ch01_ao";
+				function = "i2s_ao";
+				bias-disable;
+			};
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+				bias-pull-up;
+			};
+		};
+
+		i2c_ao_pins: i2c_mst_ao {
+			mux {
+				groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
+				function = "i2c_mst_ao";
+				bias-disable;
+			};
+		};
+
+		ir_recv_pins: remote {
+			mux {
+				groups = "remote_input";
+				function = "remote";
+				bias-disable;
+			};
+		};
+
+		pwm_f_ao_pins: pwm-f-ao {
+			mux {
+				groups = "pwm_f_ao";
+				function = "pwm_f_ao";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&ao_arc_rproc {
+	compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
+	amlogic,secbus2 = <&secbus2>;
+	sram = <&ao_arc_sram>;
+	resets = <&reset RESET_MEDIA_CPU>;
+	clocks = <&clkc CLKID_AO_MEDIA_CPU>;
+};
+
+&cbus {
+	reset: reset-controller@4404 {
+		compatible = "amlogic,meson8b-reset";
+		reg = <0x4404 0x9c>;
+		#reset-cells = <1>;
+	};
+
+	analog_top: analog-top@81a8 {
+		compatible = "amlogic,meson8-analog-top", "syscon";
+		reg = <0x81a8 0x14>;
+	};
+
+	pwm_ef: pwm@86c0 {
+		compatible = "amlogic,meson8-pwm-v2";
+		clocks = <&xtal>,
+			 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+			 <&clkc CLKID_FCLK_DIV4>,
+			 <&clkc CLKID_FCLK_DIV3>;
+		reg = <0x86c0 0x10>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	clock-measure@8758 {
+		compatible = "amlogic,meson8-clk-measure";
+		reg = <0x8758 0x1c>;
+	};
+
+	pinctrl_cbus: pinctrl@8030 {
+		compatible = "amlogic,meson8-cbus-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x8030 0x108>;
+
+		gpio: bank@80 {
+			reg = <0x80 0x28>,
+			      <0xb8 0x18>,
+			      <0xf0 0x18>,
+			      <0x00 0x30>;
+			reg-names = "mux", "pull", "pull-enable", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_cbus 0 0 120>;
+		};
+
+		i2c_b_pins: i2c-b {
+			mux {
+				groups = "i2c_sda_b", "i2c_sck_b";
+				function = "i2c_b";
+				bias-disable;
+			};
+		};
+
+		sd_a_pins: sd-a {
+			mux {
+				groups = "sd_d0_a", "sd_d1_a", "sd_d2_a",
+					"sd_d3_a", "sd_clk_a", "sd_cmd_a";
+				function = "sd_a";
+				bias-disable;
+			};
+		};
+
+		sd_b_pins: sd-b {
+			mux {
+				groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
+					"sd_d3_b", "sd_clk_b", "sd_cmd_b";
+				function = "sd_b";
+				bias-disable;
+			};
+		};
+
+		sd_c_pins: sd-c {
+			mux {
+				groups = "sd_d0_c", "sd_d1_c", "sd_d2_c",
+					"sd_d3_c", "sd_clk_c", "sd_cmd_c";
+				function = "sd_c";
+				bias-disable;
+			};
+		};
+
+		sdxc_a_pins: sdxc-a {
+			mux {
+				groups = "sdxc_d0_a", "sdxc_d13_a",
+					 "sdxc_clk_a", "sdxc_cmd_a";
+				function = "sdxc_a";
+				bias-pull-up;
+			};
+		};
+
+		sdxc_b_pins: sdxc-b {
+			mux {
+				groups = "sdxc_d0_b", "sdxc_d13_b",
+					 "sdxc_clk_b", "sdxc_cmd_b";
+				function = "sdxc_b";
+				bias-pull-up;
+			};
+		};
+
+		sdxc_c_pins: sdxc-c {
+			mux {
+				groups = "sdxc_d0_c", "sdxc_d13_c",
+					"sdxc_clk_c", "sdxc_cmd_c",
+					"sdxc_d47_c";
+				function = "sdxc_c";
+				bias-pull-up;
+			};
+		};
+
+		spdif_out_pins: spdif-out {
+			mux {
+				groups = "spdif_out";
+				function = "spdif";
+				bias-disable;
+			};
+		};
+
+		spi_nor_pins: nor {
+			mux {
+				groups = "nor_d", "nor_q", "nor_c", "nor_cs";
+				function = "nor";
+				bias-disable;
+			};
+		};
+
+		eth_pins: ethernet {
+			mux {
+				groups = "eth_tx_clk_50m", "eth_tx_en",
+					 "eth_txd1", "eth_txd0",
+					 "eth_rx_clk_in", "eth_rx_dv",
+					 "eth_rxd1", "eth_rxd0", "eth_mdio",
+					 "eth_mdc";
+				function = "ethernet";
+				bias-disable;
+			};
+		};
+
+		pwm_e_pins: pwm-e {
+			mux {
+				groups = "pwm_e";
+				function = "pwm_e";
+				bias-disable;
+			};
+		};
+
+		uart_a1_pins: uart-a1 {
+			mux {
+				groups = "uart_tx_a1",
+				       "uart_rx_a1";
+				function = "uart_a";
+				bias-pull-up;
+			};
+		};
+
+		uart_a1_cts_rts_pins: uart-a1-cts-rts {
+			mux {
+				groups = "uart_cts_a1",
+				       "uart_rts_a1";
+				function = "uart_a";
+				bias-disable;
+			};
+		};
+
+		xtal_32k_out_pins: xtal-32k-out {
+			mux {
+				groups = "xtal_32k_out";
+				function = "xtal";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&ahb_sram {
+	ao_arc_sram: aoarc-sram@0 {
+		compatible = "amlogic,meson8-ao-arc-sram";
+		reg = <0x0 0x8000>;
+		pool;
+	};
+
+	smp-sram@1ff80 {
+		compatible = "amlogic,meson8-smp-sram";
+		reg = <0x1ff80 0x8>;
+	};
+};
+
+&efuse {
+	compatible = "amlogic,meson8-efuse";
+	clocks = <&clkc CLKID_EFUSE>;
+	clock-names = "core";
+
+	temperature_calib: calib@1f4 {
+		/* only the upper two bytes are relevant */
+		reg = <0x1f4 0x4>;
+	};
+};
+
+&ethmac {
+	clocks = <&clkc CLKID_ETH>;
+	clock-names = "stmmaceth";
+
+	power-domains = <&pwrc PWRC_MESON8_ETHERNET_MEM_ID>;
+};
+
+&gpio_intc {
+	compatible = "amlogic,meson8-gpio-intc", "amlogic,meson-gpio-intc";
+	status = "okay";
+};
+
+&hhi {
+	clkc: clock-controller {
+		compatible = "amlogic,meson8-clkc";
+		clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>;
+		clock-names = "xtal", "ddr_pll";
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pwrc: power-controller {
+		compatible = "amlogic,meson8-pwrc";
+		#power-domain-cells = <1>;
+		amlogic,ao-sysctrl = <&pmu>;
+		clocks = <&clkc CLKID_VPU>;
+		clock-names = "vpu";
+		assigned-clocks = <&clkc CLKID_VPU>;
+		assigned-clock-rates = <364285714>;
+	};
+};
+
+&hwrng {
+	clocks = <&clkc CLKID_RNG0>;
+	clock-names = "core";
+};
+
+&i2c_AO {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&i2c_A {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&L2 {
+	arm,data-latency = <3 3 3>;
+	arm,tag-latency = <2 2 2>;
+	arm,filter-ranges = <0x100000 0xc0000000>;
+	prefetch-data = <1>;
+	prefetch-instr = <1>;
+	arm,prefetch-offset = <7>;
+	arm,double-linefill = <1>;
+	arm,prefetch-drop = <1>;
+	arm,shared-override;
+};
+
+&periph {
+	scu@0 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x0 0x100>;
+	};
+
+	timer@200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0x200 0x20>;
+		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&clkc CLKID_PERIPH>;
+
+		/*
+		 * the arm_global_timer driver currently does not handle clock
+		 * rate changes. Keep it disabled for now.
+		 */
+		status = "disabled";
+	};
+
+	timer@600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x600 0x20>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&clkc CLKID_PERIPH>;
+	};
+};
+
+&pwm_ab {
+	compatible = "amlogic,meson8-pwm-v2";
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&pwm_cd {
+	compatible = "amlogic,meson8-pwm-v2";
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&rtc {
+	compatible = "amlogic,meson8-rtc";
+	resets = <&reset RESET_RTC>;
+};
+
+&saradc {
+	compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc";
+	clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
+	clock-names = "clkin", "core";
+	amlogic,hhi-sysctrl = <&hhi>;
+	nvmem-cells = <&temperature_calib>;
+	nvmem-cell-names = "temperature_calib";
+};
+
+&sdhc {
+	compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>,
+		 <&clkc CLKID_FCLK_DIV5>,
+		 <&clkc CLKID_SDHC>;
+	clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
+};
+
+&secbus {
+	secbus2: system-controller@4000 {
+		compatible = "amlogic,meson8-secbus2", "syscon";
+		reg = <0x4000 0x2000>;
+	};
+};
+
+&sdio {
+	compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio";
+	clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
+	clock-names = "core", "clkin";
+};
+
+&spifc {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&timer_abcde {
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk";
+};
+
+&uart_AO {
+	compatible = "amlogic,meson8-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_A {
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_C {
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&usb0 {
+	compatible = "amlogic,meson8-usb", "snps,dwc2";
+	clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+	clock-names = "otg";
+};
+
+&usb1 {
+	compatible = "amlogic,meson8-usb", "snps,dwc2";
+	clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+	clock-names = "otg";
+};
+
+&usb0_phy {
+	compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy";
+	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+	clock-names = "usb_general", "usb";
+	resets = <&reset RESET_USB_OTG>;
+};
+
+&usb1_phy {
+	compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy";
+	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
+	clock-names = "usb_general", "usb";
+	resets = <&reset RESET_USB_OTG>;
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8b-ec100.dts b/arch/arm/boot/dts/amlogic/meson8b-ec100.dts
new file mode 100644
index 000000000000..236999548094
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8b-ec100.dts
@@ -0,0 +1,479 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "meson8b.dtsi"
+
+/ {
+	model = "Endless Computers Endless Mini";
+	compatible = "endless,ec100", "amlogic,meson8b";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		pal-switch {
+			label = "pal";
+			linux,input-type = <EV_SW>;
+			linux,code = <KEY_SWITCHVIDEOMODE>;
+			gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
+		};
+
+		ntsc-switch {
+			label = "ntsc";
+			linux,input-type = <EV_SW>;
+			linux,code = <KEY_SWITCHVIDEOMODE>;
+			gpios = <&gpio GPIOH_8 GPIO_ACTIVE_HIGH>;
+		};
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio GPIOH_9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		/*
+		 * shutdown is managed by the EC (embedded micro-controller)
+		 * which is configured through GPIOAO_2 (poweroff GPIO) and
+		 * GPIOAO_7 (power LED, which has to go LOW as well).
+		 */
+		gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		timeout-ms = <20000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "ec100:red:power";
+			/*
+			 * Needs to go LOW (together with the poweroff GPIO)
+			 * during shutdown to allow the EC (embedded
+			 * micro-controller) to shutdown the system. Setting
+			 * the output to LOW signals the EC to start a
+			 * "breathing"/pulsing effect until the power is fully
+			 * turned off.
+			 */
+			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	rtc32k_xtal: rtc32k-xtal-clk {
+		/* X2 in the schematics */
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "RTC32K";
+		#clock-cells = <0>;
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "M8B-EC100";
+
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-rates = <270950400>,
+				       <294912000>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&rt5640>;
+			};
+		};
+	};
+
+	usb_vbus: regulator-usb-vbus {
+		/*
+		 * Silergy SY6288CCAC-GP 2A Power Distribution Switch.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&vcc_5v>;
+
+		/*
+		 * signal name from the schematics: USB_PWR_EN
+		 */
+		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_5v: regulator-vcc5v {
+		/*
+		 * supplied by the main power input which called PWR_5V_STB
+		 * in the schematics
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC5V";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		/*
+		 * signal name from the schematics: 3V3_5V_EN
+		 */
+		gpio = <&gpio GPIODV_29 GPIO_ACTIVE_LOW>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcck: regulator-vcck {
+		/*
+		 * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
+		 * Synchronous Step Down Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VCCK";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwm-supply = <&vcc_5v>;
+
+		pwms = <&pwm_cd 0 1148 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc1v8 {
+		/*
+		 * ABLIC S-1339D18-M5001-GP
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc_3v3: regulator-vcc3v3 {
+		/*
+		 * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
+		 * Synchronous Step Down Regulator. Also called
+		 * VDDIO_AO3.3V in the schematics.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vcc_5v>;
+	};
+
+	vcc_ddr3: regulator-vcc-ddr3 {
+		/*
+		 * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
+		 * Synchronous Step Down Regulator. Also called
+		 * DDR3_1.5V in the schematics.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC_DDR3_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+
+		vin-supply = <&vcc_5v>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_rtc: regulator-vcc-rtc {
+		/*
+		 * Global Mixed-mode Technology Inc. G918T12U-GP
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC_RTC";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		/*
+		 * When the board is powered then the input is VCC3V3,
+		 * otherwise power is taken from the coin cell battery.
+		 */
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vddee: regulator-vddee {
+		/*
+		 * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
+		 * Synchronous Step Down Regulator. Also called VDDAO
+		 * in a part of the schematics.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDEE";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwm-supply = <&vcc_5v>;
+
+		pwms = <&pwm_cd 1 1148 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&aiu {
+	status = "okay";
+
+	pinctrl-0 = <&i2s_am_clk_pins>, <&i2s_out_ao_clk_pins>,
+		    <&i2s_out_lr_clk_pins>, <&i2s_out_ch01_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_rmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* IC Plus IP101A/G (0x02430c54) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+
+			icplus,select-interrupt;
+			interrupt-parent = <&gpio_intc>;
+			/* GPIOH_3 */
+			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+
+	rt5640: codec@1c {
+		compatible = "realtek,rt5640";
+
+		reg = <0x1c>;
+
+		#sound-dai-cells = <0>;
+
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <13 IRQ_TYPE_EDGE_BOTH>; /* GPIOAO_13 */
+
+		/*
+		 * TODO: realtek,ldo1-en-gpios is connected to GPIO_BSD_EN.
+		 * We currently cannot configure this pin correctly.
+		 * Luckily for us it's in the "right" state by default.
+		 */
+		realtek,in1-differential;
+	};
+};
+
+&mali {
+	mali-supply = <&vddee>;
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc_1v8>;
+};
+
+&sdhc {
+	status = "okay";
+
+	pinctrl-0 = <&sdxc_c_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	max-frequency = <50000000>;
+
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	no-sdio;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
+&sdio {
+	status = "okay";
+
+	pinctrl-0 = <&sd_b_pins>;
+	pinctrl-names = "default";
+
+	/* SD card */
+	sd_card_slot: slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		no-sdio;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+		vmmc-supply = <&vcc_3v3>;
+	};
+};
+
+&gpio_ao {
+	gpio-line-names = "Linux_TX", "Linux_RX",
+			  "SLP_S5_N", "USB2_OC_FLAG#",
+			  "HUB_RST", "USB_PWR_EN",
+			  "I2S_IN", "SLP_S1_N",
+			  "TCK", "TMS", "TDI", "TDO",
+			  "HDMI_CEC", "5640_IRQ",
+			  "MUTE", "S805_TEST#";
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOX */
+			  "WIFI_SD_D0", "WIFI_SD_D1", "WIFI_SD_D2",
+			  "WIFI_SD_D3", "BTPCM_DOUT", "BTPCM_DIN",
+			  "BTPCM_SYNC", "BTPCM_CLK", "WIFI_SD_CLK",
+			  "WIFI_SD_CMD", "WIFI_32K", "WIFI_PWREN",
+			  "UART_B_TX", "UART_B_RX", "UART_B_CTS_N",
+			  "UART_B_RTS_N", "BT_EN", "WIFI_WAKE_HOST",
+			  /* Bank GPIOY */
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "",
+			  /* Bank GPIODV */
+			  "VCCK_PWM_C", "I2C_SDA_A", "I2C_SCL_A",
+			  "I2C_SDA_B", "I2C_SCL_B", "VDDEE_PWM_D",
+			  "VDDEE_PWM 3V3_5V_EN",
+			  /* Bank GPIOH */
+			  "HDMI_HPD", "HDMI_I2C_SDA", "HDMI_I2C_SCL",
+			  "RMII_IRQ", "RMII_RST#", "RMII_TXD1",
+			  "RMII_TXD0", "AV_select_1", "AV_select_2",
+			  "MCU_Control_S",
+			  /* Bank CARD */
+			  "SD_D1_B", "SD_D0_B", "SD_CLK_8726MX",
+			  "SD_CMD_8726MX", "SD_D3_B", "SD_D2_B",
+			  "CARD_EN_DET (CARD_DET)",
+			  /* Bank BOOT */
+			  "NAND_D0 (EMMC)", "NAND_D1 (EMMC)",
+			  "NAND_D2 (EMMC)", "NAND_D3 (EMMC)",
+			  "NAND_D4 (EMMC)", "NAND_D5 (EMMC)",
+			  "NAND_D6 (EMMC)", "NAND_D7 (EMMC)",
+			  "NAND_CS1 (EMMC)", "NAND_CS2 iNAND_RS1 (EMMC)",
+			  "NAND_nR/B iNAND_CMD (EMMC)", "NAND_ALE (EMMC)",
+			  "NAND_CLE (EMMC)", "nRE_S1 NAND_nRE (EMMC)",
+			  "nWE_S1 NAND_nWE (EMMC)",  "", "", "", "SPI_CS",
+			  /* Bank DIF */
+			  "RMII_RXD1", "RMII_RXD0", "RMII_CRS_DV",
+			  "RMII_50M_IN", "GPIODIF_4", "GPIODIF_5",
+			  "RMII_TXEN", "CPUETH_25MOUT", "RMII_MDC",
+			  "RMII_MDIO";
+};
+
+&pwm_cd {
+	status = "okay";
+	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
+	pinctrl-names = "default";
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&rtc32k_xtal>;
+	vdd-supply = <&vcc_rtc>;
+};
+
+/* exposed through the pin headers labeled "URDUG1" on the top of the PCB */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+/*
+ * connected to the Bluetooth part of the RTL8723BS SDIO wifi / Bluetooth
+ * combo chip. This is only available on the variant with 2GB RAM.
+ */
+&uart_B {
+	status = "okay";
+	pinctrl-0 = <&uart_b0_pins>, <&uart_b0_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&usb1 {
+	status = "okay";
+	vbus-supply = <&usb_vbus>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8b-mxq.dts b/arch/arm/boot/dts/amlogic/meson8b-mxq.dts
new file mode 100644
index 000000000000..0bca0b33eea2
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8b-mxq.dts
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "meson8b.dtsi"
+
+/ {
+	model = "TRONFY MXQ S805";
+	compatible = "tronfy,mxq", "amlogic,meson8b";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	vcck: regulator-vcck {
+		compatible = "pwm-regulator";
+
+		regulator-name = "VCCK";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwm-supply = <&vcc_5v>;
+
+		pwms = <&pwm_cd 0 1148 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc_3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vcc_5v>;
+	};
+
+	vcc_5v: regulator-vcc5v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddee: regulator-vddee {
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDEE";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwm-supply = <&vcc_5v>;
+
+		pwms = <&pwm_cd 1 1148 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_rmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* IC Plus IP101A/G (0x02430c54) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+
+			icplus,select-interrupt;
+			interrupt-parent = <&gpio_intc>;
+			/* GPIOH_3 */
+			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&mali {
+	mali-supply = <&vddee>;
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc_1v8>;
+};
+
+&sdio {
+	status = "okay";
+
+	pinctrl-0 = <&sd_b_pins>;
+	pinctrl-names = "default";
+
+	/* SD card */
+	sd_card_slot: slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		no-sdio;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+		vmmc-supply = <&vcc_3v3>;
+	};
+};
+
+&pwm_cd {
+	status = "okay";
+	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
+	pinctrl-names = "default";
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts b/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts
new file mode 100644
index 000000000000..1cd2093202ca
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+#include "meson8b.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Hardkernel ODROID-C1";
+	compatible = "hardkernel,odroid-c1", "amlogic,meson8b";
+
+	aliases {
+		serial0 = &uart_AO;
+		mmc0 = &sd_card_slot;
+		mmc1 = &sdhc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-blue {
+			label = "c1:blue:alive";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	p5v0: regulator-p5v0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "P5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	tflash_vdd: regulator-tflash_vdd {
+		/*
+		 * signal name from schematics: TFLASH_VDD_EN
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "TFLASH_VDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vcc_3v3>;
+
+		gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	tf_io: gpio-regulator-tf_io {
+		compatible = "regulator-gpio";
+
+		regulator-name = "TF_IO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vcc_3v3>;
+
+		/*
+		 * signal name from schematics: TF_3V3N_1V8_EN
+		 */
+		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0
+			  1800000 1>;
+	};
+
+	rtc32k_xtal: rtc32k-xtal-clk {
+		/* X3 in the schematics */
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "RTC32K";
+		#clock-cells = <0>;
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		/*
+		 * RICHTEK RT9179 configured for a fixed output voltage of
+		 * 1.8V. This supplies not only VCC1V8 but also IOREF_1V8 and
+		 * VDD1V8 according to the schematics.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		vin-supply = <&p5v0>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		/*
+		 * Monolithic Power Systems MP2161 configured for a fixed
+		 * output voltage of 3.3V. This supplies not only VCC3V3 but
+		 * also VDD3V3 and VDDIO_AO3V3 according to the schematics.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&p5v0>;
+	};
+
+	vcck: regulator-vcck {
+		/* Monolithic Power Systems MP2161 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VCCK";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwm-supply = <&p5v0>;
+
+		pwms = <&pwm_cd 0 12218 0>;
+		pwm-dutycycle-range = <91 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddc_ddr: regulator-vddc-ddr {
+		/*
+		 * Monolithic Power Systems MP2161 configured for a fixed
+		 * output voltage of 1.5V. This supplies not only DDR_VDDC but
+		 * also DDR3_1V5 according to the schematics.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "DDR_VDDC";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+
+		vin-supply = <&p5v0>;
+	};
+
+	vddee: regulator-vddee {
+		/* Monolithic Power Systems MP2161 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDEE";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwm-supply = <&p5v0>;
+
+		pwms = <&pwm_cd 1 12218 0>;
+		pwm-dutycycle-range = <91 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vdd_rtc: regulator-vdd-rtc {
+		/*
+		 * Torex Semiconductor XC6215 configured for a fixed output of
+		 * 0.9V.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDD_RTC";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		vin-supply = <&vcc_3v3>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&efuse {
+	ethernet_mac_address: mac@1b4 {
+		reg = <0x1b4 0x6>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy>;
+	phy-mode = "rgmii-id";
+
+	nvmem-cells = <&ethernet_mac_address>;
+	nvmem-cell-names = "mac-address";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Realtek RTL8211F (0x001cc916) */
+		eth_phy: ethernet-phy@0 {
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+
+			interrupt-parent = <&gpio_intc>;
+			/* GPIOH_3 */
+			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOX */
+			  "J2 Header Pin 35", "J2 Header Pin 36",
+			  "J2 Header Pin 32", "J2 Header Pin 31",
+			  "J2 Header Pin 29", "J2 Header Pin 18",
+			  "J2 Header Pin 22", "J2 Header Pin 16",
+			  "J2 Header Pin 23", "J2 Header Pin 21",
+			  "J2 Header Pin 19", "J2 Header Pin 33",
+			  "J2 Header Pin 8", "J2 Header Pin 10",
+			  "J2 Header Pin 15", "J2 Header Pin 13",
+			  "J2 Header Pin 24", "J2 Header Pin 26",
+			  /* Bank GPIOY */
+			  "Revision (upper)", "Revision (lower)",
+			  "J2 Header Pin 7", "", "J2 Header Pin 12",
+			  "J2 Header Pin 11", "", "", "",
+			  "TFLASH_VDD_EN", "", "",
+			  /* Bank GPIODV */
+			  "VCCK_PWM (PWM_C)", "I2CA_SDA", "I2CA_SCL",
+			  "I2CB_SDA", "I2CB_SCL", "VDDEE_PWM (PWM_D)",
+			  "",
+			  /* Bank GPIOH */
+			  "HDMI_HPD", "HDMI_I2C_SDA", "HDMI_I2C_SCL",
+			  "ETH_PHY_INTR", "ETH_PHY_NRST", "ETH_TXD1",
+			  "ETH_TXD0", "ETH_TXD3", "ETH_TXD2",
+			  "ETH_RGMII_TX_CLK",
+			  /* Bank CARD */
+			  "SD_DATA1 (SDB_D1)", "SD_DATA0 (SDB_D0)",
+			  "SD_CLK",  "SD_CMD", "SD_DATA3 (SDB_D3)",
+			  "SD_DATA2 (SDB_D2)", "SD_CDN (SD_DET_N)",
+			  /* Bank BOOT */
+			  "SDC_D0 (EMMC)", "SDC_D1 (EMMC)",
+			  "SDC_D2 (EMMC)", "SDC_D3 (EMMC)",
+			  "SDC_D4 (EMMC)", "SDC_D5 (EMMC)",
+			  "SDC_D6 (EMMC)", "SDC_D7 (EMMC)",
+			  "SDC_CLK (EMMC)", "SDC_RSTn (EMMC)",
+			  "SDC_CMD (EMMC)", "BOOT_SEL", "", "", "",
+			  "", "", "", "",
+			  /* Bank DIF */
+			  "ETH_RXD1", "ETH_RXD0", "ETH_RX_DV",
+			  "RGMII_RX_CLK", "ETH_RXD3", "ETH_RXD2",
+			  "ETH_TXEN", "ETH_PHY_REF_CLK_25MOUT",
+			  "ETH_MDC", "ETH_MDIO";
+};
+
+&gpio_ao {
+	gpio-line-names = "UART TX", "UART RX", "",
+			  "TF_3V3N_1V8_EN", "USB_HUB_RST_N",
+			  "USB_OTG_PWREN", "J7 Header Pin 2",
+			  "IR_IN", "J7 Header Pin 4",
+			  "J7 Header Pin 6", "J7 Header Pin 5",
+			  "J7 Header Pin 7", "HDMI_CEC",
+			  "SYS_LED", "", "";
+};
+
+&ir_receiver {
+	status = "okay";
+	pinctrl-0 = <&ir_recv_pins>;
+	pinctrl-names = "default";
+};
+
+&mali {
+	mali-supply = <&vddee>;
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc_1v8>;
+};
+
+&sdhc {
+	status = "okay";
+
+	pinctrl-0 = <&sdxc_c_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	max-frequency = <100000000>;
+
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	no-sdio;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+};
+
+&sdio {
+	status = "okay";
+
+	pinctrl-0 = <&sd_b_pins>;
+	pinctrl-names = "default";
+
+	/* SD card */
+	sd_card_slot: slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		no-sdio;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+		vmmc-supply = <&tflash_vdd>;
+		vqmmc-supply = <&tf_io>;
+	};
+};
+
+&pwm_cd {
+	status = "okay";
+	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
+	pinctrl-names = "default";
+};
+
+&rtc {
+	/* needs to be enabled manually when a battery is connected */
+	clocks = <&rtc32k_xtal>;
+	vdd-supply = <&vdd_rtc>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub@1 {
+		/* Genesys Logic GL852G usb hub */
+		compatible = "usb5e3,610";
+		reg = <1>;
+		vdd-supply = <&p5v0>;
+		reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8b.dtsi b/arch/arm/boot/dts/amlogic/meson8b.dtsi
new file mode 100644
index 000000000000..2d77b9876bf4
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8b.dtsi
@@ -0,0 +1,790 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#include <dt-bindings/clock/meson8-ddr-clkc.h>
+#include <dt-bindings/clock/meson8b-clkc.h>
+#include <dt-bindings/gpio/meson8b-gpio.h>
+#include <dt-bindings/power/meson8-power.h>
+#include <dt-bindings/reset/amlogic,meson8b-reset.h>
+#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "meson.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x200>;
+			enable-method = "amlogic,meson8b-smp";
+			resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu1: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x201>;
+			enable-method = "amlogic,meson8b-smp";
+			resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu2: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x202>;
+			enable-method = "amlogic,meson8b-smp";
+			resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu3: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x203>;
+			enable-method = "amlogic,meson8b-smp";
+			resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-96000000 {
+			opp-hz = /bits/ 64 <96000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-192000000 {
+			opp-hz = /bits/ 64 <192000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-504000000 {
+			opp-hz = /bits/ 64 <504000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1140000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1140000>;
+		};
+		opp-1320000000 {
+			opp-hz = /bits/ 64 <1320000000>;
+			opp-microvolt = <1140000>;
+		};
+		opp-1488000000 {
+			opp-hz = /bits/ 64 <1488000000>;
+			opp-microvolt = <1140000>;
+		};
+		opp-1536000000 {
+			opp-hz = /bits/ 64 <1536000000>;
+			opp-microvolt = <1140000>;
+		};
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-255000000 {
+			opp-hz = /bits/ 64 <255000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-364285714 {
+			opp-hz = /bits/ 64 <364285714>;
+			opp-microvolt = <1100000>;
+		};
+		opp-425000000 {
+			opp-hz = /bits/ 64 <425000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-510000000 {
+			opp-hz = /bits/ 64 <510000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-637500000 {
+			opp-hz = /bits/ 64 <637500000>;
+			opp-microvolt = <1100000>;
+			turbo-mode;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* 2 MiB reserved for Hardware ROM Firmware? */
+		hwrom@0 {
+			reg = <0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	thermal-zones {
+		soc-thermal {
+			polling-delay-passive = <250>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+			thermal-sensors = <&thermal_sensor>;
+
+			cooling-maps {
+				map0 {
+					trip = <&soc_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&soc_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				soc_passive: soc-passive {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				soc_hot: soc-hot {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				soc_critical: soc-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	mmcbus: bus@c8000000 {
+		compatible = "simple-bus";
+		reg = <0xc8000000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xc8000000 0x8000>;
+
+		ddr_clkc: clock-controller@400 {
+			compatible = "amlogic,meson8b-ddr-clkc";
+			reg = <0x400 0x20>;
+			clocks = <&xtal>;
+			clock-names = "xtal";
+			#clock-cells = <1>;
+		};
+
+		dmcbus: bus@6000 {
+			compatible = "simple-bus";
+			reg = <0x6000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x400>;
+
+			canvas: video-lut@48 {
+				compatible = "amlogic,meson8b-canvas",
+					     "amlogic,canvas";
+				reg = <0x48 0x14>;
+			};
+		};
+	};
+
+	apb: bus@d0000000 {
+		compatible = "simple-bus";
+		reg = <0xd0000000 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xd0000000 0x200000>;
+
+		mali: gpu@c0000 {
+			compatible = "amlogic,meson8b-mali", "arm,mali-450";
+			reg = <0xc0000 0x40000>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp", "gpmmu", "pp", "pmu",
+					  "pp0", "ppmmu0", "pp1", "ppmmu1";
+			resets = <&reset RESET_MALI>;
+			clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+			clock-names = "bus", "core";
+			operating-points-v2 = <&gpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+}; /* end of / */
+
+&aiu {
+	compatible = "amlogic,aiu-meson8b", "amlogic,aiu";
+	clocks = <&clkc CLKID_AIU_GLUE>,
+		 <&clkc CLKID_I2S_OUT>,
+		 <&clkc CLKID_AOCLK_GATE>,
+		 <&clkc CLKID_CTS_AMCLK>,
+		 <&clkc CLKID_MIXER_IFACE>,
+		 <&clkc CLKID_IEC958>,
+		 <&clkc CLKID_IEC958_GATE>,
+		 <&clkc CLKID_CTS_MCLK_I958>,
+		 <&clkc CLKID_CTS_I958>;
+	clock-names = "pclk",
+		      "i2s_pclk",
+		      "i2s_aoclk",
+		      "i2s_mclk",
+		      "i2s_mixer",
+		      "spdif_pclk",
+		      "spdif_aoclk",
+		      "spdif_mclk",
+		      "spdif_mclk_sel";
+	resets = <&reset RESET_AIU>;
+};
+
+&aobus {
+	pmu: pmu@e0 {
+		compatible = "amlogic,meson8b-pmu", "syscon";
+		reg = <0xe0 0x18>;
+	};
+
+	pinctrl_aobus: pinctrl@14 {
+		compatible = "amlogic,meson8b-aobus-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x14 0x1c>;
+
+		gpio_ao: bank@0 {
+			reg = <0x0 0x4>,
+			      <0x18 0x4>,
+			      <0x10 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aobus 0 0 16>;
+		};
+
+		i2s_am_clk_pins: i2s-am-clk-out {
+			mux {
+				groups = "i2s_am_clk_out";
+				function = "i2s";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ao_clk_pins: i2s-ao-clk-out {
+			mux {
+				groups = "i2s_ao_clk_out";
+				function = "i2s";
+				bias-disable;
+			};
+		};
+
+		i2s_out_lr_clk_pins: i2s-lr-clk-out {
+			mux {
+				groups = "i2s_lr_clk_out";
+				function = "i2s";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch01_ao_pins: i2s-out-ch01 {
+			mux {
+				groups = "i2s_out_01";
+				function = "i2s";
+				bias-disable;
+			};
+		};
+
+		spdif_out_1_pins: spdif-out-1 {
+			mux {
+				groups = "spdif_out_1";
+				function = "spdif_1";
+				bias-disable;
+			};
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+				bias-pull-up;
+			};
+		};
+
+		ir_recv_pins: remote {
+			mux {
+				groups = "remote_input";
+				function = "remote";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&ao_arc_rproc {
+	compatible = "amlogic,meson8b-ao-arc", "amlogic,meson-mx-ao-arc";
+	amlogic,secbus2 = <&secbus2>;
+	sram = <&ao_arc_sram>;
+	resets = <&reset RESET_MEDIA_CPU>;
+	clocks = <&clkc CLKID_AO_MEDIA_CPU>;
+};
+
+&cbus {
+	reset: reset-controller@4404 {
+		compatible = "amlogic,meson8b-reset";
+		reg = <0x4404 0x9c>;
+		#reset-cells = <1>;
+	};
+
+	analog_top: analog-top@81a8 {
+		compatible = "amlogic,meson8b-analog-top", "syscon";
+		reg = <0x81a8 0x14>;
+	};
+
+	pwm_ef: pwm@86c0 {
+		compatible = "amlogic,meson8b-pwm-v2", "amlogic,meson8-pwm-v2";
+		reg = <0x86c0 0x10>;
+		clocks = <&xtal>,
+			 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+			 <&clkc CLKID_FCLK_DIV4>,
+			 <&clkc CLKID_FCLK_DIV3>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	clock-measure@8758 {
+		compatible = "amlogic,meson8b-clk-measure";
+		reg = <0x8758 0x1c>;
+	};
+
+	pinctrl_cbus: pinctrl@8030 {
+		compatible = "amlogic,meson8b-cbus-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x8030 0x108>;
+
+		gpio: bank@80 {
+			reg = <0x80 0x28>,
+			      <0xb8 0x18>,
+			      <0xf0 0x18>,
+			      <0x00 0x38>;
+			reg-names = "mux", "pull", "pull-enable", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_cbus 0 0 83>;
+		};
+
+		eth_rgmii_pins: eth-rgmii {
+			mux {
+				groups = "eth_tx_clk",
+					 "eth_tx_en",
+					 "eth_txd1_0",
+					 "eth_txd0_0",
+					 "eth_rx_clk",
+					 "eth_rx_dv",
+					 "eth_rxd1",
+					 "eth_rxd0",
+					 "eth_mdio_en",
+					 "eth_mdc",
+					 "eth_ref_clk",
+					 "eth_txd2",
+					 "eth_txd3",
+					 "eth_rxd3",
+					 "eth_rxd2";
+				function = "ethernet";
+				bias-disable;
+			};
+		};
+
+		eth_rmii_pins: eth-rmii {
+			mux {
+				groups = "eth_tx_en",
+					 "eth_txd1_0",
+					 "eth_txd0_0",
+					 "eth_rx_clk",
+					 "eth_rx_dv",
+					 "eth_rxd1",
+					 "eth_rxd0",
+					 "eth_mdio_en",
+					 "eth_mdc";
+				function = "ethernet";
+				bias-disable;
+			};
+		};
+
+		i2c_a_pins: i2c-a {
+			mux {
+				groups = "i2c_sda_a", "i2c_sck_a";
+				function = "i2c_a";
+				bias-disable;
+			};
+		};
+
+		sd_b_pins: sd-b {
+			mux {
+				groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
+					"sd_d3_b", "sd_clk_b", "sd_cmd_b";
+				function = "sd_b";
+				bias-disable;
+			};
+		};
+
+		sdxc_c_pins: sdxc-c {
+			mux {
+				groups = "sdxc_d0_c", "sdxc_d13_c",
+					 "sdxc_d47_c", "sdxc_clk_c",
+					 "sdxc_cmd_c";
+				function = "sdxc_c";
+				bias-pull-up;
+			};
+		};
+
+		pwm_c1_pins: pwm-c1 {
+			mux {
+				groups = "pwm_c1";
+				function = "pwm_c";
+				bias-disable;
+			};
+		};
+
+		pwm_d_pins: pwm-d {
+			mux {
+				groups = "pwm_d";
+				function = "pwm_d";
+				bias-disable;
+			};
+		};
+
+		uart_b0_pins: uart-b0 {
+			mux {
+				groups = "uart_tx_b0",
+				       "uart_rx_b0";
+				function = "uart_b";
+				bias-pull-up;
+			};
+		};
+
+		uart_b0_cts_rts_pins: uart-b0-cts-rts {
+			mux {
+				groups = "uart_cts_b0",
+				       "uart_rts_b0";
+				function = "uart_b";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&ahb_sram {
+	ao_arc_sram: aoarc-sram@0 {
+		compatible = "amlogic,meson8b-ao-arc-sram";
+		reg = <0x0 0x8000>;
+		pool;
+	};
+
+	smp-sram@1ff80 {
+		compatible = "amlogic,meson8b-smp-sram";
+		reg = <0x1ff80 0x8>;
+	};
+};
+
+
+&efuse {
+	compatible = "amlogic,meson8b-efuse";
+	clocks = <&clkc CLKID_EFUSE>;
+	clock-names = "core";
+
+	temperature_calib: calib@1f4 {
+		/* only the upper two bytes are relevant */
+		reg = <0x1f4 0x4>;
+	};
+};
+
+&ethmac {
+	compatible = "amlogic,meson8b-dwmac", "snps,dwmac-3.70a", "snps,dwmac";
+
+	reg = <0xc9410000 0x10000
+	       0xc1108140 0x4>;
+
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
+	rx-fifo-depth = <4096>;
+	tx-fifo-depth = <2048>;
+
+	resets = <&reset RESET_ETHERNET>;
+	reset-names = "stmmaceth";
+
+	power-domains = <&pwrc PWRC_MESON8_ETHERNET_MEM_ID>;
+};
+
+&gpio_intc {
+	compatible = "amlogic,meson8b-gpio-intc",
+		     "amlogic,meson-gpio-intc";
+	status = "okay";
+};
+
+&hhi {
+	clkc: clock-controller {
+		compatible = "amlogic,meson8b-clkc";
+		clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>;
+		clock-names = "xtal", "ddr_pll";
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pwrc: power-controller {
+		compatible = "amlogic,meson8b-pwrc";
+		#power-domain-cells = <1>;
+		amlogic,ao-sysctrl = <&pmu>;
+		resets = <&reset RESET_DBLK>,
+			 <&reset RESET_PIC_DC>,
+			 <&reset RESET_HDMI_APB>,
+			 <&reset RESET_HDMI_SYSTEM_RESET>,
+			 <&reset RESET_VENCI>,
+			 <&reset RESET_VENCP>,
+			 <&reset RESET_VDAC_4>,
+			 <&reset RESET_VENCL>,
+			 <&reset RESET_VIU>,
+			 <&reset RESET_VENC>,
+			 <&reset RESET_RDMA>;
+		reset-names = "dblk", "pic_dc", "hdmi_apb", "hdmi_system",
+			      "venci", "vencp", "vdac", "vencl", "viu",
+			      "venc", "rdma";
+		clocks = <&clkc CLKID_VPU>;
+		clock-names = "vpu";
+		assigned-clocks = <&clkc CLKID_VPU>;
+		assigned-clock-rates = <182142857>;
+	};
+};
+
+&hwrng {
+	clocks = <&clkc CLKID_RNG0>;
+	clock-names = "core";
+};
+
+&i2c_AO {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&i2c_A {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&L2 {
+	arm,data-latency = <3 3 3>;
+	arm,tag-latency = <2 2 2>;
+	arm,filter-ranges = <0x100000 0xc0000000>;
+	prefetch-data = <1>;
+	prefetch-instr = <1>;
+	arm,prefetch-offset = <7>;
+	arm,double-linefill = <1>;
+	arm,prefetch-drop = <1>;
+	arm,shared-override;
+};
+
+&periph {
+	scu@0 {
+		compatible = "arm,cortex-a5-scu";
+		reg = <0x0 0x100>;
+	};
+
+	timer@200 {
+		compatible = "arm,cortex-a5-global-timer";
+		reg = <0x200 0x20>;
+		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&clkc CLKID_PERIPH>;
+
+		/*
+		 * the arm_global_timer driver currently does not handle clock
+		 * rate changes. Keep it disabled for now.
+		 */
+		status = "disabled";
+	};
+
+	timer@600 {
+		compatible = "arm,cortex-a5-twd-timer";
+		reg = <0x600 0x20>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&clkc CLKID_PERIPH>;
+	};
+};
+
+&pwm_ab {
+	compatible = "amlogic,meson8b-pwm-v2", "amlogic,meson8-pwm-v2";
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&pwm_cd {
+	compatible = "amlogic,meson8b-pwm-v2", "amlogic,meson8-pwm-v2";
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&rtc {
+	compatible = "amlogic,meson8b-rtc";
+	resets = <&reset RESET_RTC>;
+};
+
+&saradc {
+	compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc";
+	clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
+	clock-names = "clkin", "core";
+	amlogic,hhi-sysctrl = <&hhi>;
+	nvmem-cells = <&temperature_calib>;
+	nvmem-cell-names = "temperature_calib";
+};
+
+&sdhc {
+	compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>,
+		 <&clkc CLKID_FCLK_DIV5>,
+		 <&clkc CLKID_SDHC>;
+	clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
+};
+
+&secbus {
+	secbus2: system-controller@4000 {
+		compatible = "amlogic,meson8b-secbus2", "syscon";
+		reg = <0x4000 0x2000>;
+	};
+};
+
+&sdio {
+	compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio";
+	clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
+	clock-names = "core", "clkin";
+};
+
+&timer_abcde {
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk";
+};
+
+&uart_AO {
+	compatible = "amlogic,meson8b-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_A {
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_C {
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&usb0 {
+	compatible = "amlogic,meson8b-usb", "snps,dwc2";
+	clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+	clock-names = "otg";
+};
+
+&usb1 {
+	compatible = "amlogic,meson8b-usb", "snps,dwc2";
+	clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+	clock-names = "otg";
+};
+
+&usb0_phy {
+	compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy";
+	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+	clock-names = "usb_general", "usb";
+	resets = <&reset RESET_USB_OTG>;
+};
+
+&usb1_phy {
+	compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy";
+	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
+	clock-names = "usb_general", "usb";
+	resets = <&reset RESET_USB_OTG>;
+};
+
+&wdt {
+	compatible = "amlogic,meson8b-wdt";
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/amlogic/meson8m2-mxiii-plus.dts
new file mode 100644
index 000000000000..08aa661e17ad
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8m2-mxiii-plus.dts
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Oleg Ivanov <balbes-150@yandex.ru>
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ */
+
+/dts-v1/;
+
+#include "meson8m2.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Tronsmart MXIII Plus";
+	compatible = "tronsmart,mxiii-plus", "amlogic,meson8m2";
+
+	aliases {
+		ethernet0 = &ethmac;
+		i2c0 = &i2c_AO;
+		serial0 = &uart_AO;
+		mmc0 = &sd_card_slot;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Function";
+			linux,code = <KEY_FN>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		pinctrl-0 = <&xtal_32k_out_pins>;
+		pinctrl-names = "default";
+
+		reset-gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>,
+			      <&gpio_ao GPIOAO_6 GPIO_ACTIVE_LOW>;
+
+		clocks = <&xtal_32k_out>;
+		clock-names = "ext_clock";
+	};
+
+	vcc_3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	xtal_32k_out: xtal-32k-out-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xtal_32k_out";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii-id";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* Realtek RTL8211F (0x001cc916) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ir_receiver {
+	status = "okay";
+	pinctrl-0 = <&ir_recv_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_pins>;
+	pinctrl-names = "default";
+
+	pmic@32 {
+		compatible = "ricoh,rn5t618";
+		reg = <0x32>;
+		system-power-controller;
+
+		regulators {
+			vcck: DCDC1 {
+				regulator-name = "VCCK";
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vddee: DCDC2 {
+				/* the output is also used as VDDAO */
+				regulator-name = "VDD_EE";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			DCDC3 {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-name = "VDDIO_AO28";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vddio_ao1v8: LDO2 {
+				regulator-name = "VDDIO_AO18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO3 {
+				regulator-name = "VCC1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO4 {
+				regulator-name = "VCC2V8";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO5 {
+				regulator-name = "AVDD1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDORTC1 {
+				regulator-name = "VDD_LDO";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2700000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDORTC2 {
+				regulator-name = "RTC_0V9";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&mali {
+	mali-supply = <&vddee>;
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+/* SDIO wifi */
+&sdhc {
+	status = "okay";
+
+	pinctrl-0 = <&sdxc_a_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	max-frequency = <50000000>;
+
+	disable-wp;
+	non-removable;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
+&sdio {
+	status = "okay";
+
+	pinctrl-0 = <&sd_b_pins>;
+	pinctrl-names = "default";
+
+	/* SD card */
+	sd_card_slot: slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		no-sdio;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+		vmmc-supply = <&vcc_3v3>;
+	};
+};
+
+/* connected to the Bluetooth module */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a1_pins>, <&uart_a1_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm20702a1";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/amlogic/meson8m2.dtsi b/arch/arm/boot/dts/amlogic/meson8m2.dtsi
new file mode 100644
index 000000000000..6725dd9fd825
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8m2.dtsi
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ */
+
+#include "meson8.dtsi"
+
+/ {
+	model = "Amlogic Meson8m2 SoC";
+	compatible = "amlogic,meson8m2";
+}; /* end of / */
+
+&clkc {
+	compatible = "amlogic,meson8m2-clkc", "amlogic,meson8-clkc";
+};
+
+&dmcbus {
+	/* the offset of the canvas registers has changed compared to Meson8 */
+	/delete-node/ video-lut@20;
+
+	canvas: video-lut@48 {
+		compatible = "amlogic,meson8m2-canvas", "amlogic,canvas";
+		reg = <0x48 0x14>;
+	};
+};
+
+&ethmac {
+	compatible = "amlogic,meson8m2-dwmac", "snps,dwmac";
+	reg = <0xc9410000 0x10000
+		0xc1108140 0x8>;
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
+	resets = <&reset RESET_ETHERNET>;
+	reset-names = "stmmaceth";
+};
+
+&pinctrl_aobus {
+	compatible = "amlogic,meson8m2-aobus-pinctrl",
+		     "amlogic,meson8-aobus-pinctrl";
+};
+
+&pinctrl_cbus {
+	compatible = "amlogic,meson8m2-cbus-pinctrl",
+		     "amlogic,meson8-cbus-pinctrl";
+
+	eth_rgmii_pins: ethernet {
+		mux {
+			groups = "eth_tx_clk_50m", "eth_tx_en",
+				 "eth_txd3", "eth_txd2",
+				 "eth_txd1", "eth_txd0",
+				 "eth_rx_clk_in", "eth_rx_dv",
+				 "eth_rxd3", "eth_rxd2",
+				 "eth_rxd1", "eth_rxd0",
+				 "eth_mdio", "eth_mdc";
+			function = "ethernet";
+			bias-disable;
+		};
+	};
+};
+
+&pwrc {
+	compatible = "amlogic,meson8m2-pwrc";
+	resets = <&reset RESET_DBLK>,
+		 <&reset RESET_PIC_DC>,
+		 <&reset RESET_HDMI_APB>,
+		 <&reset RESET_HDMI_SYSTEM_RESET>,
+		 <&reset RESET_VENCI>,
+		 <&reset RESET_VENCP>,
+		 <&reset RESET_VDAC_4>,
+		 <&reset RESET_VENCL>,
+		 <&reset RESET_VIU>,
+		 <&reset RESET_VENC>,
+		 <&reset RESET_RDMA>;
+	reset-names = "dblk", "pic_dc", "hdmi_apb", "hdmi_system", "venci",
+		      "vencp", "vdac", "vencl", "viu", "venc", "rdma";
+	assigned-clocks = <&clkc CLKID_VPU>;
+	assigned-clock-rates = <364000000>;
+};
+
+&saradc {
+	compatible = "amlogic,meson8m2-saradc", "amlogic,meson-saradc";
+};
+
+&sdhc {
+	compatible = "amlogic,meson8m2-sdhc", "amlogic,meson-mx-sdhc";
+};
+
+&usb0_phy {
+	compatible = "amlogic,meson8m2-usb2-phy", "amlogic,meson-mx-usb2-phy";
+};
+
+&usb1_phy {
+	compatible = "amlogic,meson8m2-usb2-phy", "amlogic,meson-mx-usb2-phy";
+};
+
+&wdt {
+	compatible = "amlogic,meson8m2-wdt", "amlogic,meson8b-wdt";
+};
diff --git a/arch/arm/boot/dts/arm/Makefile b/arch/arm/boot/dts/arm/Makefile
new file mode 100644
index 000000000000..07ebb64e2cd0
--- /dev/null
+++ b/arch/arm/boot/dts/arm/Makefile
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_INTEGRATOR) += \
+	integratorap.dtb \
+	integratorap-im-pd1.dtb \
+	integratorcp.dtb
+dtb-$(CONFIG_ARCH_MPS2) += \
+	mps2-an385.dtb \
+	mps2-an399.dtb
+dtb-$(CONFIG_ARCH_REALVIEW) += \
+	arm-realview-pb1176.dtb \
+	arm-realview-pb11mp.dtb \
+	arm-realview-eb.dtb \
+	arm-realview-eb-bbrevd.dtb \
+	arm-realview-eb-11mp.dtb \
+	arm-realview-eb-11mp-bbrevd.dtb \
+	arm-realview-eb-11mp-ctrevb.dtb \
+	arm-realview-eb-11mp-bbrevd-ctrevb.dtb \
+	arm-realview-eb-a9mp.dtb \
+	arm-realview-eb-a9mp-bbrevd.dtb \
+	arm-realview-pba8.dtb \
+	arm-realview-pbx-a9.dtb
+dtb-$(CONFIG_ARCH_VERSATILE) += \
+	versatile-ab.dtb \
+	versatile-ab-ib2.dtb \
+	versatile-pb.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += \
+	vexpress-v2p-ca5s.dtb \
+	vexpress-v2p-ca9.dtb \
+	vexpress-v2p-ca15-tc1.dtb \
+	vexpress-v2p-ca15_a7.dtb
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dts b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd-ctrevb.dts
index e18769df9fd9..e18769df9fd9 100644
--- a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd-ctrevb.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dts b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd.dts
index 26b1c69e9f43..26b1c69e9f43 100644
--- a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-ctrevb.dts b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-ctrevb.dts
index e68527b0d552..e68527b0d552 100644
--- a/arch/arm/boot/dts/arm-realview-eb-11mp-ctrevb.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-ctrevb.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp.dts b/arch/arm/boot/dts/arm/arm-realview-eb-11mp.dts
index aac1edd4b227..aac1edd4b227 100644
--- a/arch/arm/boot/dts/arm-realview-eb-11mp.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-11mp.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dts b/arch/arm/boot/dts/arm/arm-realview-eb-a9mp-bbrevd.dts
index 42efac7496ef..42efac7496ef 100644
--- a/arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-a9mp-bbrevd.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-a9mp.dts b/arch/arm/boot/dts/arm/arm-realview-eb-a9mp.dts
index 967684b3636c..967684b3636c 100644
--- a/arch/arm/boot/dts/arm-realview-eb-a9mp.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-a9mp.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dts b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dts
index f533c8b49d97..f533c8b49d97 100644
--- a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi
index a79e1d1d30a7..7f62aef9ca8a 100644
--- a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dtsi
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi
@@ -22,7 +22,7 @@
 
 / {
 	/* Introduce a fixed regulator for the new ethernet controller */
-	veth: fixedregulator@0 {
+	veth: regulator-veth {
 		compatible = "regulator-fixed";
 		regulator-name = "veth";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb-mp.dtsi
index 7b8d90b7aeea..40f7515aa068 100644
--- a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-mp.dtsi
@@ -59,7 +59,7 @@
 			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		L2: l2-cache {
+		L2: cache-controller {
 			compatible = "arm,l220-cache";
 			reg = <0x1f002000 0x1000>;
 			interrupt-parent = <&intc>;
@@ -103,7 +103,7 @@
 		};
 
 		/* PMU with one IRQ line per core */
-		pmu: pmu@0 {
+		pmu: pmu {
 			compatible = "arm,arm11mpcore-pmu";
 			interrupt-parent = <&intc>;
 			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
@@ -150,11 +150,6 @@
 	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
 };
 
-&charlcd {
-	interrupt-parent = <&intc>;
-	interrupts = <0  IRQ_TYPE_LEVEL_HIGH>;
-};
-
 &serial0 {
 	interrupt-parent = <&intc>;
 	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/arm-realview-eb.dts b/arch/arm/boot/dts/arm/arm-realview-eb.dts
index 15431077f00c..15431077f00c 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb.dtsi
index e2e9599596e2..16f784da5a55 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm/arm-realview-eb.dtsi
@@ -22,9 +22,10 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "arm,realview-eb";
 
 	chosen { };
@@ -38,12 +39,13 @@
 	};
 
 	memory {
+		device_type = "memory";
 		/* 128 MiB memory @ 0x0 */
 		reg = <0x00000000 0x08000000>;
 	};
 
 	/* The voltage to the MMC card is hardwired at 3.3V */
-	vmmc: fixedregulator@0 {
+	vmmc: regulator-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc";
 		regulator-min-microvolt = <3300000>;
@@ -51,13 +53,13 @@
 		regulator-boot-on;
         };
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 	};
 
-	timclk: timclk@1M {
+	timclk: clock-1000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <24>;
@@ -65,48 +67,8 @@
 		clocks = <&xtal24mhz>;
 	};
 
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	wdogclk: wdogclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
 	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
@@ -117,6 +79,9 @@
 		compatible = "arm,versatile-flash", "cfi-flash";
 		reg = <0x40000000 0x04000000>;
 		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
 	};
 
 	flash1@44000000 {
@@ -124,6 +89,9 @@
 		compatible = "arm,versatile-flash", "cfi-flash";
 		reg = <0x44000000 0x04000000>;
 		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
 	};
 
 	/* SMSC LAN91C111 ethernet with PHY and EEPROM */
@@ -140,7 +108,44 @@
 	usb: usb@4f000000 {
 		compatible = "nxp,usb-isp1761";
 		reg = <0x4f000000 0x20000>;
-		port1-otg;
+		dr_mode = "peripheral";
+	};
+
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
 	};
 
 	/* These peripherals are inside the FPGA */
@@ -153,96 +158,112 @@
 		syscon: syscon@10000000 {
 			compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd";
 			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-			led@08.0 {
+			led@8,0 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x01>;
 				label = "versatile:0";
 				linux,default-trigger = "heartbeat";
 				default-state = "on";
 			};
-			led@08.1 {
+			led@8,1 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x02>;
 				label = "versatile:1";
 				linux,default-trigger = "mmc0";
 				default-state = "off";
 			};
-			led@08.2 {
+			led@8,2 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x04>;
 				label = "versatile:2";
 				linux,default-trigger = "cpu0";
 				default-state = "off";
 			};
-			led@08.3 {
+			led@8,3 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x08>;
 				label = "versatile:3";
 				default-state = "off";
 			};
-			led@08.4 {
+			led@8,4 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x10>;
 				label = "versatile:4";
 				default-state = "off";
 			};
-			led@08.5 {
+			led@8,5 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x20>;
 				label = "versatile:5";
 				default-state = "off";
 			};
-			led@08.6 {
+			led@8,6 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x40>;
 				label = "versatile:6";
 				default-state = "off";
 			};
-			led@08.7 {
+			led@8,7 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x80>;
 				label = "versatile:7";
 				default-state = "off";
 			};
-			oscclk0: osc0@0c {
+			oscclk0: clock-controller@c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x0C>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk1: osc1@10 {
+			oscclk1: clock-controller@10 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x10>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk2: osc2@14 {
+			oscclk2: clock-controller@14 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x14>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk3: osc3@18 {
+			oscclk3: clock-controller@18 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x18>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk4: osc4@1c {
+			oscclk4: clock-controller@1c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x1c>;
@@ -334,18 +355,18 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		ssp: ssp@1000d000 {
+		ssp: spi@1000d000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		wdog: watchdog@10010000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x10010000 0x1000>;
 			clocks = <&wdogclk>, <&pclk>;
-			clock-names = "wdogclk", "apb_pclk";
+			clock-names = "wdog_clk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -409,36 +430,15 @@
 			interrupt-names = "combined";
 			clocks = <&oscclk0>, <&pclk>;
 			clock-names = "clcdclk", "apb_pclk";
+			/* 1024x768 16bpp @65MHz works fine */
+			max-memory-bandwidth = <95000000>;
 
 			port {
 				clcd_pads: endpoint {
-					remote-endpoint = <&clcd_panel>;
+					remote-endpoint = <&vga_bridge_in>;
 					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
 				};
 			};
-
-			panel {
-				compatible = "panel-dpi";
-
-				port {
-					clcd_panel: endpoint {
-						remote-endpoint = <&clcd_pads>;
-					};
-				};
-
-				/* Standard 640x480 VGA timings */
-				panel-timing {
-					clock-frequency = <25175000>;
-					hactive = <640>;
-					hback-porch = <48>;
-					hfront-porch = <16>;
-					hsync-len = <96>;
-					vactive = <480>;
-					vback-porch = <33>;
-					vfront-porch = <10>;
-					vsync-len = <2>;
-				};
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
index c789564f2803..b9b10cbd65aa 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
@@ -23,9 +23,10 @@
 /dts-v1/;
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "ARM RealView PB1176";
 	compatible = "arm,realview-pb1176";
 
@@ -40,12 +41,13 @@
 	};
 
 	memory {
+		device_type = "memory";
 		/* 128 MiB memory @ 0x0 */
 		reg = <0x00000000 0x08000000>;
 	};
 
 	/* The voltage to the MMC card is hardwired at 3.3V */
-	vmmc: fixedregulator@0 {
+	vmmc: regulator-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc";
 		regulator-min-microvolt = <3300000>;
@@ -53,7 +55,7 @@
 		regulator-boot-on;
         };
 
-	veth: fixedregulator@0 {
+	veth: regulator-veth {
 		compatible = "regulator-fixed";
 		regulator-name = "veth";
 		regulator-min-microvolt = <3300000>;
@@ -61,13 +63,13 @@
 		regulator-boot-on;
 	};
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: mclk: kmiclk: sspclk: uartclk: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 	};
 
-	timclk: timclk@1M {
+	timclk: clock-1000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <24>;
@@ -75,40 +77,8 @@
 		clocks = <&xtal24mhz>;
 	};
 
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
 	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
@@ -118,12 +88,18 @@
 		compatible = "arm,versatile-flash", "cfi-flash";
 		reg = <0x30000000 0x4000000>;
 		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
 	};
 
 	fpga_flash@38000000 {
 		compatible = "arm,versatile-flash", "cfi-flash";
 		reg = <0x38000000 0x800000>;
 		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
 	};
 
 	/*
@@ -158,7 +134,44 @@
 		reg = <0x3b000000 0x20000>;
 		interrupt-parent = <&intc_fpga1176>;
 		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
-		port1-otg;
+		dr_mode = "peripheral";
+	};
+
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
 	};
 
 	soc {
@@ -171,96 +184,112 @@
 		syscon: syscon@10000000 {
 			compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd";
 			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-			led@08.0 {
+			led@8,0 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x01>;
 				label = "versatile:0";
 				linux,default-trigger = "heartbeat";
 				default-state = "on";
 			};
-			led@08.1 {
+			led@8,1 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x02>;
 				label = "versatile:1";
 				linux,default-trigger = "mmc0";
 				default-state = "off";
 			};
-			led@08.2 {
+			led@8,2 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x04>;
 				label = "versatile:2";
 				linux,default-trigger = "cpu0";
 				default-state = "off";
 			};
-			led@08.3 {
+			led@8,3 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x08>;
 				label = "versatile:3";
 				default-state = "off";
 			};
-			led@08.4 {
+			led@8,4 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x10>;
 				label = "versatile:4";
 				default-state = "off";
 			};
-			led@08.5 {
+			led@8,5 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x20>;
 				label = "versatile:5";
 				default-state = "off";
 			};
-			led@08.6 {
+			led@8,6 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x40>;
 				label = "versatile:6";
 				default-state = "off";
 			};
-			led@08.7 {
+			led@8,7 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x80>;
 				label = "versatile:7";
 				default-state = "off";
 			};
-			oscclk0: osc0@0c {
+			oscclk0: clock-controller@c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x0C>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk1: osc1@10 {
+			oscclk1: clock-controller@10 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x10>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk2: osc2@14 {
+			oscclk2: clock-controller@14 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x14>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk3: osc3@18 {
+			oscclk3: clock-controller@18 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x18>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk4: osc4@1c {
+			oscclk4: clock-controller@1c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x1c>;
@@ -278,7 +307,7 @@
 			      <0x10120000 0x100>;
 		};
 
-		L2: l2-cache {
+		L2: cache-controller {
 			compatible = "arm,l220-cache";
 			reg = <0x10110000 0x1000>;
 			interrupt-parent = <&intc_dc1176>;
@@ -343,13 +372,13 @@
 			clock-names = "apb_pclk";
 		};
 
-		pb1176_ssp: ssp@1010b000 {
+		pb1176_ssp: spi@1010b000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1010b000 0x1000>;
 			interrupt-parent = <&intc_dc1176>;
 			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		pb1176_serial0: serial@1010c000 {
@@ -390,7 +419,7 @@
 
 		/* Direct-mapped development chip ROM */
 		pb1176_rom@10200000 {
-			compatible = "direct-mapped";
+			compatible = "mtd-rom";
 			reg = <0x10200000 0x4000>;
 			bank-width = <1>;
 		};
@@ -403,36 +432,15 @@
 			interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&oscclk0>, <&pclk>;
 			clock-names = "clcdclk", "apb_pclk";
+			/* 1024x768 16bpp @65MHz works fine */
+			max-memory-bandwidth = <95000000>;
 
 			port {
 				clcd_pads: endpoint {
-					remote-endpoint = <&clcd_panel>;
+					remote-endpoint = <&vga_bridge_in>;
 					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
 				};
 			};
-
-			panel {
-				compatible = "panel-dpi";
-
-				port {
-					clcd_panel: endpoint {
-						remote-endpoint = <&clcd_pads>;
-					};
-				};
-
-				/* Standard 640x480 VGA timings */
-				panel-timing {
-					clock-frequency = <25175000>;
-					hactive = <640>;
-					hback-porch = <48>;
-					hfront-porch = <16>;
-					hsync-len = <96>;
-					vactive = <480>;
-					vback-porch = <33>;
-					vfront-porch = <10>;
-					vsync-len = <2>;
-				};
-			};
 		};
 	};
 
@@ -564,7 +572,5 @@
 			clocks = <&pclk>;
 			clock-names = "apb_pclk";
 		};
-
-
 	};
 };
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts
index 3944765ac4b0..db1b6793cd2c 100644
--- a/arch/arm/boot/dts/arm-realview-pb11mp.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts
@@ -23,9 +23,10 @@
 /dts-v1/;
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "ARM RealView PB11MPcore";
 	compatible = "arm,realview-pb11mp";
 
@@ -39,6 +40,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		/*
 		 * The PB11MPCore has 512 MiB memory @ 0x70000000
 		 * and the first 256 are also remapped @ 0x00000000
@@ -90,7 +92,7 @@
 		      <0x1f000100 0x100>;
 	};
 
-	L2: l2-cache {
+	L2: cache-controller@1f002000 {
 		compatible = "arm,l220-cache";
 		reg = <0x1f002000 0x1000>;
 		interrupt-parent = <&intc_tc11mp>;
@@ -145,7 +147,7 @@
 	};
 
 	/* The voltage to the MMC card is hardwired at 3.3V */
-	vmmc: fixedregulator@0 {
+	vmmc: regulator-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc";
 		regulator-min-microvolt = <3300000>;
@@ -153,7 +155,7 @@
 		regulator-boot-on;
         };
 
-	veth: fixedregulator@0 {
+	veth: regulator-veth {
 		compatible = "regulator-fixed";
 		regulator-name = "veth";
 		regulator-min-microvolt = <3300000>;
@@ -161,19 +163,19 @@
 		regulator-boot-on;
 	};
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 	};
 
-	refclk32khz: refclk32khz {
+	refclk32khz: clock-32768 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 	};
 
-	timclk: timclk@1M {
+	timclk: clock-1000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <24>;
@@ -181,48 +183,8 @@
 		clocks = <&xtal24mhz>;
 	};
 
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	wdogclk: wdogclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
 	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
@@ -233,6 +195,9 @@
 		compatible = "arm,versatile-flash", "cfi-flash";
 		reg = <0x40000000 0x04000000>;
 		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
 	};
 
 	flash1@44000000 {
@@ -240,6 +205,52 @@
 		compatible = "arm,versatile-flash", "cfi-flash";
 		reg = <0x44000000 0x04000000>;
 		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		/*
+		 * This DDC I2C is connected directly to the DVI portions
+		 * of the connector, so it's not really working when the
+		 * monitor is connected to the VGA connector.
+		 */
+		compatible = "vga-connector";
+		ddc-i2c-bus = <&i2c1>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
 	};
 
 	soc {
@@ -252,114 +263,132 @@
 		pb11mp_syscon: syscon@10000000 {
 			compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd";
 			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-			led@08.0 {
+			led@8,0 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x01>;
 				label = "versatile:0";
 				linux,default-trigger = "heartbeat";
 				default-state = "on";
 			};
-			led@08.1 {
+			led@8,1 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x02>;
 				label = "versatile:1";
 				linux,default-trigger = "mmc0";
 				default-state = "off";
 			};
-			led@08.2 {
+			led@8,2 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x04>;
 				label = "versatile:2";
 				linux,default-trigger = "cpu0";
 				default-state = "off";
 			};
-			led@08.3 {
+			led@8,3 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x08>;
 				label = "versatile:3";
 				linux,default-trigger = "cpu1";
 				default-state = "off";
 			};
-			led@08.4 {
+			led@8,4 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x10>;
 				label = "versatile:4";
 				linux,default-trigger = "cpu2";
 				default-state = "off";
 			};
-			led@08.5 {
+			led@8,5 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x20>;
 				label = "versatile:5";
 				linux,default-trigger = "cpu3";
 				default-state = "off";
 			};
-			led@08.6 {
+			led@8,6 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x40>;
 				label = "versatile:6";
 				default-state = "off";
 			};
-			led@08.7 {
+			led@8,7 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x80>;
 				label = "versatile:7";
 				default-state = "off";
 			};
 
-			oscclk0: osc0@0c {
+			oscclk0: clock-controller@c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x0C>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk1: osc1@10 {
+			oscclk1: clock-controller@10 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x10>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk2: osc2@14 {
+			oscclk2: clock-controller@14 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x14>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk3: osc3@18 {
+			oscclk3: clock-controller@18 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x18>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk4: osc4@1c {
+			oscclk4: clock-controller@1c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x1c>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk5: osc5@d4 {
+			oscclk5: clock-controller@d4 {
 				compatible = "arm,syscon-icst307";
+				reg = <0xd4 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0xd4>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk6: osc6@d8 {
+			oscclk6: clock-controller@d8 {
 				compatible = "arm,syscon-icst307";
+				reg = <0xd8 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0xd8>;
@@ -480,13 +509,13 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		ssp@1000d000 {
+		spi@1000d000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			interrupt-parent = <&intc_pb11mp>;
 			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		watchdog@1000f000 {
@@ -495,7 +524,7 @@
 			interrupt-parent = <&intc_pb11mp>;
 			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&wdogclk>, <&pclk>;
-			clock-names = "wdogclk", "apb_pclk";
+			clock-names = "wdog_clk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -505,7 +534,7 @@
 			interrupt-parent = <&intc_pb11mp>;
 			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&wdogclk>, <&pclk>;
-			clock-names = "wdogclk", "apb_pclk";
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		timer01: timer@10011000 {
@@ -517,8 +546,8 @@
 			clocks = <&sp810_syscon 0>,
 			         <&sp810_syscon 1>,
 				 <&pclk>;
-			clock-names = "timerclk0",
-				    "timerclk1",
+			clock-names = "timer0clk",
+				    "timer1clk",
 				    "apb_pclk";
 		};
 
@@ -531,8 +560,8 @@
 			clocks = <&sp810_syscon 2>,
 			         <&sp810_syscon 3>,
 				 <&pclk>;
-			clock-names = "timerclk2",
-				    "timerclk3",
+			clock-names = "timer0clk",
+				    "timer1clk",
 				    "apb_pclk";
 		};
 
@@ -575,6 +604,13 @@
 			clock-names = "apb_pclk";
 		};
 
+		i2c1: i2c@10016000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10016000 0x1000>;
+		};
+
 		rtc: rtc@10017000 {
 			compatible = "arm,pl031", "arm,primecell";
 			reg = <0x10017000 0x1000>;
@@ -587,16 +623,16 @@
 		timer45: timer@10018000 {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x10018000 0x1000>;
-			clocks = <&timclk>, <&pclk>;
-			clock-names = "timer", "apb_pclk";
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
 			status = "disabled";
 		};
 
 		timer67: timer@10019000 {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x10019000 0x1000>;
-			clocks = <&timclk>, <&pclk>;
-			clock-names = "timer", "apb_pclk";
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -609,37 +645,15 @@
 			interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&oscclk4>, <&pclk>;
 			clock-names = "clcdclk", "apb_pclk";
-			max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */
+			/* 1024x768 16bpp @65MHz works fine */
+			max-memory-bandwidth = <95000000>;
 
 			port {
 				clcd_pads: endpoint {
-					remote-endpoint = <&clcd_panel>;
+					remote-endpoint = <&vga_bridge_in>;
 					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
 				};
 			};
-
-			panel {
-				compatible = "panel-dpi";
-
-				port {
-					clcd_panel: endpoint {
-						remote-endpoint = <&clcd_pads>;
-					};
-				};
-
-				/* Standard 640x480 VGA timings */
-				panel-timing {
-					clock-frequency = <25175000>;
-					hactive = <640>;
-					hback-porch = <48>;
-					hfront-porch = <16>;
-					hsync-len = <96>;
-					vactive = <480>;
-					vback-porch = <33>;
-					vfront-porch = <10>;
-					vsync-len = <2>;
-				};
-			};
 		};
 
 		/*
@@ -676,7 +690,7 @@
 			reg = <0x4f000000 0x20000>;
 			interrupt-parent = <&intc_tc11mp>;
 			interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
-			port1-otg;
+			dr_mode = "peripheral";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/arm-realview-pba8.dts b/arch/arm/boot/dts/arm/arm-realview-pba8.dts
index d3238c252b59..d2e0082245f9 100644
--- a/arch/arm/boot/dts/arm-realview-pba8.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-pba8.dts
@@ -40,7 +40,7 @@
 		};
 	};
 
-	pmu: pmu@0 {
+	pmu: pmu {
 		compatible = "arm,cortex-a8-pmu";
 		interrupt-parent = <&intc>;
 		interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/arm-realview-pbx-a9.dts b/arch/arm/boot/dts/arm/arm-realview-pbx-a9.dts
index 90d00b407f85..507ad7ac4974 100644
--- a/arch/arm/boot/dts/arm-realview-pbx-a9.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-pbx-a9.dts
@@ -60,7 +60,7 @@
 		};
 	};
 
-	L2: l2-cache {
+	L2: cache-controller {
 		compatible = "arm,pl310-cache";
 		reg = <0x1f002000 0x1000>;
 		cache-unified;
@@ -97,7 +97,7 @@
 		interrupts = <1 14 0xf04>;
 	};
 
-	pmu: pmu@0 {
+	pmu: pmu {
 		compatible = "arm,cortex-a9-pmu";
 		interrupt-parent = <&intc>;
 		interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi
index aeb49c4bd773..e625403a9456 100644
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi
@@ -22,9 +22,10 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "arm,realview-pbx";
 
 	chosen { };
@@ -34,16 +35,18 @@
 		serial1 = &serial1;
 		serial2 = &serial2;
 		serial3 = &serial3;
-		i2c0 = &i2c;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
 	};
 
 	memory {
+		device_type = "memory";
 		/* 128 MiB memory @ 0x0 */
 		reg = <0x00000000 0x08000000>;
 	};
 
 	/* The voltage to the MMC card is hardwired at 3.3V */
-	vmmc: fixedregulator@0 {
+	vmmc: regulator-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc";
 		regulator-min-microvolt = <3300000>;
@@ -51,7 +54,7 @@
 		regulator-boot-on;
         };
 
-	veth: fixedregulator@0 {
+	veth: regulator-veth {
 		compatible = "regulator-fixed";
 		regulator-name = "veth";
 		regulator-min-microvolt = <3300000>;
@@ -59,19 +62,19 @@
 		regulator-boot-on;
 	};
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 	};
 
-	refclk32khz: refclk32khz {
+	refclk32khz: clock-32768 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 	};
 
-	timclk: timclk@1M {
+	timclk: clock-1000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <24>;
@@ -79,48 +82,8 @@
 		clocks = <&xtal24mhz>;
 	};
 
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	wdogclk: wdogclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
 	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
@@ -131,6 +94,9 @@
 		compatible = "arm,versatile-flash", "cfi-flash";
 		reg = <0x40000000 0x04000000>;
 		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
 	};
 
 	flash1@44000000 {
@@ -138,6 +104,9 @@
 		compatible = "arm,versatile-flash", "cfi-flash";
 		reg = <0x44000000 0x04000000>;
 		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
 	};
 
 	/* SMSC 9118 ethernet with PHY and EEPROM */
@@ -155,10 +124,53 @@
 	usb: usb@4f000000 {
 		compatible = "nxp,usb-isp1761";
 		reg = <0x4f000000 0x20000>;
-		port1-otg;
+		dr_mode = "peripheral";
 	};
 
-	soc: soc@0 {
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		/*
+		 * This DDC I2C is connected directly to the DVI portions
+		 * of the connector, so it's not really working when the
+		 * monitor is connected to the VGA connector.
+		 */
+		compatible = "vga-connector";
+		ddc-i2c-bus = <&i2c1>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	soc: soc {
 		compatible = "arm,realview-pbx-soc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -168,96 +180,112 @@
 		syscon: syscon@10000000 {
 			compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd";
 			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-			led@08.0 {
+			led@8,0 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x01>;
 				label = "versatile:0";
 				linux,default-trigger = "heartbeat";
 				default-state = "on";
 			};
-			led@08.1 {
+			led@8,1 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x02>;
 				label = "versatile:1";
 				linux,default-trigger = "mmc0";
 				default-state = "off";
 			};
-			led@08.2 {
+			led@8,2 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x04>;
 				label = "versatile:2";
 				linux,default-trigger = "cpu0";
 				default-state = "off";
 			};
-			led@08.3 {
+			led@8,3 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x08>;
 				label = "versatile:3";
 				default-state = "off";
 			};
-			led@08.4 {
+			led@8,4 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x10>;
 				label = "versatile:4";
 				default-state = "off";
 			};
-			led@08.5 {
+			led@8,5 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x20>;
 				label = "versatile:5";
 				default-state = "off";
 			};
-			led@08.6 {
+			led@8,6 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x40>;
 				label = "versatile:6";
 				default-state = "off";
 			};
-			led@08.7 {
+			led@8,7 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x80>;
 				label = "versatile:7";
 				default-state = "off";
 			};
-			oscclk0: osc0@0c {
+			oscclk0: clock-controller@c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x0C>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk1: osc1@10 {
+			oscclk1: clock-controller@10 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x10>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk2: osc2@14 {
+			oscclk2: clock-controller@14 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x14>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk3: osc3@18 {
+			oscclk3: clock-controller@18 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x18>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk4: osc4@1c {
+			oscclk4: clock-controller@1c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x1c>;
@@ -285,7 +313,7 @@
 					       <&timclk>;
 		};
 
-		i2c: i2c@10002000 {
+		i2c0: i2c@10002000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "arm,versatile-i2c";
@@ -318,18 +346,18 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		ssp: ssp@1000d000 {
+		ssp: spi@1000d000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		wdog0: watchdog@1000f000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x1000f000 0x1000>;
 			clocks = <&wdogclk>, <&pclk>;
-			clock-names = "wdogclk", "apb_pclk";
+			clock-names = "wdog_clk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -337,7 +365,7 @@
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x10010000 0x1000>;
 			clocks = <&wdogclk>, <&pclk>;
-			clock-names = "wdogclk", "apb_pclk";
+			clock-names = "wdog_clk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -396,7 +424,12 @@
 			clock-names = "apb_pclk";
 		};
 
-		/* DVI serial bus control is at 10016000 */
+		i2c1: i2c@10016000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10016000 0x1000>;
+		};
 
 		rtc: rtc@10017000 {
 			compatible = "arm,pl031", "arm,primecell";
@@ -506,37 +539,15 @@
 			interrupt-names = "combined";
 			clocks = <&oscclk4>, <&pclk>;
 			clock-names = "clcdclk", "apb_pclk";
+			/* 1024x768 16bpp @65MHz works fine */
+			max-memory-bandwidth = <95000000>;
 
 			port {
 				clcd_pads: endpoint {
-					remote-endpoint = <&clcd_panel>;
+					remote-endpoint = <&vga_bridge_in>;
 					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
 				};
 			};
-
-			panel {
-				compatible = "panel-dpi";
-
-				port {
-					clcd_panel: endpoint {
-						remote-endpoint = <&clcd_pads>;
-					};
-				};
-
-				/* Standard 640x480 VGA timings */
-				panel-timing {
-					clock-frequency = <25175000>;
-					hactive = <640>;
-					hback-porch = <48>;
-					hfront-porch = <16>;
-					hsync-len = <96>;
-					vactive = <480>;
-					vback-porch = <33>;
-					vfront-porch = <10>;
-					vsync-len = <2>;
-				};
-			};
 		};
 	};
 };
-
diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/arm/integrator.dtsi
index 6fe0dd1d3541..7f1c8ee9dd8a 100644
--- a/arch/arm/boot/dts/integrator.dtsi
+++ b/arch/arm/boot/dts/arm/integrator.dtsi
@@ -1,17 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * SoC core Device Tree for the ARM Integrator platforms
  */
 
-/include/ "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
 	core-module@10000000 {
 		compatible = "arm,core-module-integrator", "syscon", "simple-mfd";
 		reg = <0x10000000 0x200>;
+		ranges = <0x0 0x10000000 0x200>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 
 		/* Use core module LED to indicate CPU load */
-		led@0c.0 {
+		led@c,0 {
 			compatible = "register-bit-led";
+			reg = <0x0c 0x04>;
 			offset = <0x0c>;
 			mask = <0x01>;
 			label = "integrator:core_module";
@@ -55,6 +66,9 @@
 		compatible = "arm,versatile-flash", "cfi-flash";
 		reg = <0x24000000 0x02000000>;
 		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
 	};
 
 	fpga {
@@ -74,12 +88,12 @@
 			interrupts = <8>;
 		};
 
-		uart@16000000 {
+		serial@16000000 {
 			reg = <0x16000000 0x1000>;
 			interrupts = <1>;
 		};
 
-		uart@17000000 {
+		serial@17000000 {
 			reg = <0x17000000 0x1000>;
 			interrupts = <2>;
 		};
@@ -94,35 +108,42 @@
 			interrupts = <4>;
 		};
 
-		syscon {
+		syscon@1a000000 {
 			/* Debug registers mapped as syscon */
 			compatible = "syscon", "simple-mfd";
 			reg = <0x1a000000 0x10>;
+			ranges = <0x0 0x1a000000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-			led@04.0 {
+			led@4,0 {
 				compatible = "register-bit-led";
+				reg = <0x04 0x04>;
 				offset = <0x04>;
 				mask = <0x01>;
 				label = "integrator:green0";
 				linux,default-trigger = "heartbeat";
 				default-state = "on";
 			};
-			led@04.1 {
+			led@4,1 {
 				compatible = "register-bit-led";
+				reg = <0x04 0x04>;
 				offset = <0x04>;
 				mask = <0x02>;
 				label = "integrator:yellow";
 				default-state = "off";
 			};
-			led@04.2 {
+			led@4,2 {
 				compatible = "register-bit-led";
+				reg = <0x04 0x04>;
 				offset = <0x04>;
 				mask = <0x04>;
 				label = "integrator:red";
 				default-state = "off";
 			};
-			led@04.3 {
+			led@4,3 {
 				compatible = "register-bit-led";
+				reg = <0x04 0x04>;
 				offset = <0x04>;
 				mask = <0x08>;
 				label = "integrator:green1";
diff --git a/arch/arm/boot/dts/arm/integratorap-im-pd1.dts b/arch/arm/boot/dts/arm/integratorap-im-pd1.dts
new file mode 100644
index 000000000000..db13e09f2fab
--- /dev/null
+++ b/arch/arm/boot/dts/arm/integratorap-im-pd1.dts
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for the ARM Integrator/AP platform
+ * with the IM-PD1 example logical module mounted.
+ */
+
+#include "integratorap.dts"
+
+/ {
+	model = "ARM Integrator/AP with IM-PD1";
+	compatible = "arm,integrator-ap";
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		impd1_ram: vram@c2000000 {
+			/* 1 MB of designated video RAM on the IM-PD1 */
+			compatible = "shared-dma-pool";
+			reg = <0xc2000000 0x00100000>;
+			no-map;
+		};
+	};
+};
+
+&lm0 {
+	syscon@0 {
+		compatible = "arm,im-pd1-syscon", "syscon";
+		reg = <0x00000000 0x1000>;
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		vco1: clock-controller@0 {
+			compatible = "arm,impd1-vco1";
+			reg = <0x00 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x08>;
+			vco-offset = <0x00>;
+			clocks = <&sysclk>;
+			clock-output-names = "IM-PD1-VCO1";
+		};
+
+		vco2: clock-controller@4 {
+			compatible = "arm,impd1-vco2";
+			reg = <0x04 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x08>;
+			vco-offset = <0x04>;
+			clocks = <&sysclk>;
+			clock-output-names = "IM-PD1-VCO2";
+		};
+	};
+
+	/* Also used for the Smart Card Interface SCI */
+	impd1_uartclk: clock-uart {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clock-div = <4>;
+		clock-mult = <1>;
+		clocks = <&vco2>;
+		clock-output-names = "VCO2_DIV4";
+	};
+
+	/* For the SSP the clock is divided by 64 */
+	impd1_sspclk: clock-ssp {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clock-div = <64>;
+		clock-mult = <1>;
+		clocks = <&vco2>;
+		clock-output-names = "VCO2_DIV64";
+	};
+
+	/* Fixed regulator for the MMC */
+	impd1_3v3: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* Push buttons on the IM-PD1 */
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@0 {
+			debounce-interval = <50>;
+			linux,code = <KEY_UP>;
+			label = "UP";
+			gpios = <&impd1_gpio1 0 GPIO_ACTIVE_HIGH>;
+		};
+		button@1 {
+			debounce-interval = <50>;
+			linux,code = <KEY_DOWN>;
+			label = "DOWN";
+			gpios = <&impd1_gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+		button@2 {
+			debounce-interval = <50>;
+			linux,code = <KEY_LEFT>;
+			label = "LEFT";
+			gpios = <&impd1_gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+		button@3 {
+			debounce-interval = <50>;
+			linux,code = <KEY_RIGHT>;
+			label = "UP";
+			gpios = <&impd1_gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+		button@4 {
+			debounce-interval = <50>;
+			linux,code = <KEY_ESC>;
+			label = "ESC";
+			gpios = <&impd1_gpio1 4 GPIO_ACTIVE_HIGH>;
+		};
+		button@5 {
+			debounce-interval = <50>;
+			linux,code = <KEY_ENTER>;
+			label = "ENTER";
+			gpios = <&impd1_gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+
+	bridge {
+		compatible = "ti,ths8134b", "ti,ths8134";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+					vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads_vga_dac>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+		label = "J30";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	serial@100000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x00100000 0x1000>;
+		interrupts-extended = <&impd1_vic 1>;
+		clocks = <&impd1_uartclk>, <&sysclk>;
+		clock-names = "uartclk", "apb_pclk";
+	};
+
+	serial@200000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x00200000 0x1000>;
+		interrupts-extended = <&impd1_vic 2>;
+		clocks = <&impd1_uartclk>, <&sysclk>;
+		clock-names = "uartclk", "apb_pclk";
+	};
+
+	spi@300000 {
+		compatible = "arm,pl022", "arm,primecell";
+		reg = <0x00300000 0x1000>;
+		interrupts-extended = <&impd1_vic 3>;
+		clocks = <&impd1_sspclk>, <&sysclk>;
+		clock-names = "sspclk", "apb_pclk";
+	};
+
+	impd1_gpio0: gpio@400000 {
+		compatible = "arm,pl061", "arm,primecell";
+		reg = <0x00400000 0x1000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts-extended = <&impd1_vic 4>;
+		clocks = <&sysclk>;
+		clock-names = "apb_pclk";
+	};
+
+	impd1_gpio1: gpio@500000 {
+		compatible = "arm,pl061", "arm,primecell";
+		reg = <0x00500000 0x1000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts-extended = <&impd1_vic 5>;
+		clocks = <&sysclk>;
+		clock-names = "apb_pclk";
+	};
+
+	rtc@600000 {
+		compatible = "arm,pl030", "arm,primecell";
+		reg = <0x00600000 0x1000>;
+		interrupts-extended = <&impd1_vic 6>;
+		clocks = <&sysclk>;
+		clock-names = "apb_pclk";
+	};
+
+	mmc@700000 {
+		compatible = "arm,pl181", "arm,primecell";
+		reg = <0x00700000 0x1000>;
+		interrupts-extended = <&impd1_vic 7>,
+				    <&impd1_vic 8>;
+		clocks = <&sysclk>, <&sysclk>;
+		clock-names = "mclk", "apb_pclk";
+		bus-width = <1>;
+		max-frequency = <515633>;
+		vmmc-supply = <&impd1_3v3>;
+		wp-gpios = <&impd1_gpio0 3 GPIO_ACTIVE_HIGH>;
+		cd-gpios = <&impd1_gpio0 4 GPIO_ACTIVE_LOW>;
+	};
+
+	aaci@800000 {
+		compatible = "arm,pl041", "arm,primecell";
+		reg = <0x00800000 0x1000>;
+		interrupts-extended = <&impd1_vic 9>;
+		clocks = <&sysclk>;
+		clock-names = "apb_pclk";
+	};
+
+	display@1000000 {
+		compatible = "arm,pl110", "arm,primecell";
+		reg = <0x01000000 0x1000>;
+		interrupts-extended = <&impd1_vic 11>;
+		clocks = <&vco1>, <&sysclk>;
+		clock-names = "clcdclk", "apb_pclk";
+		/* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */
+		max-memory-bandwidth = <40000000>;
+		memory-region = <&impd1_ram>;
+		dma-ranges;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clcd_pads_vga_dac: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&vga_bridge_in>;
+				arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+			};
+		};
+	};
+
+	impd1_vic: interrupt-controller@3000000 {
+		compatible = "arm,pl192-vic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x03000000 0x1000>;
+		/* Valid interrupts, 0-9 and 11 */
+		valid-mask = <0x00000bff>;
+		/* LM site 0 has IRQ 9 on the PIC */
+		interrupts-extended = <&pic 9>;
+	};
+};
diff --git a/arch/arm/boot/dts/arm/integratorap.dts b/arch/arm/boot/dts/arm/integratorap.dts
new file mode 100644
index 000000000000..9b6a1dbaf265
--- /dev/null
+++ b/arch/arm/boot/dts/arm/integratorap.dts
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for the ARM Integrator/AP platform
+ */
+
+/dts-v1/;
+#include "integrator.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "ARM Integrator/AP";
+	compatible = "arm,integrator-ap";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			/*
+			 * Since the board has pluggable CPU modules, we
+			 * cannot define a proper compatible here. Let the
+			 * boot loader fill in the apropriate compatible
+			 * string if necessary.
+			 */
+			/* compatible = "arm,arm926ej-s"; */
+			reg = <0>;
+			/*
+			 * The documentation in ARM DUI 0138E page 3-12 states
+			 * that the maximum frequency for this clock is 200 MHz
+			 * but painful trial-and-error has proved to me that it
+			 * is actually just hanging the system above 71 MHz.
+			 * Sad but true.
+			 */
+					 /* kHz     uV   */
+			operating-points = <71000  0
+					    66000  0
+					    60000  0
+					    48000  0
+					    36000  0
+					    24000  0
+					    12000  0>;
+			clocks = <&cmosc>;
+			clock-names = "cpu";
+			clock-latency = <1000000>; /* 1 ms */
+		};
+	};
+
+	aliases {
+		arm,timer-primary = &timer2;
+		arm,timer-secondary = &timer1;
+	};
+
+	chosen {
+		bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk";
+	};
+
+	/* 24 MHz chrystal on the Integrator/AP development board */
+	xtal24mhz: pclk: clock-24000000 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	/* The UART clock is 14.74 MHz divided by an ICS525 */
+	uartclk: clock-14745600 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <14745600>;
+		clocks = <&xtal24mhz>;
+	};
+
+	core-module@10000000 {
+		/* 24 MHz chrystal on the core module */
+		cm24mhz: clock-24000000 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		/* Oscillator on the core module, clocks the CPU core */
+		cmosc: clock-controller@8 {
+			compatible = "arm,syscon-icst525-integratorap-cm";
+			reg = <0x08 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x08>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* Auxilary oscillator on the core module, 32.369MHz at boot */
+		auxosc: clock-controller@1c {
+			compatible = "arm,syscon-icst525";
+			reg = <0x1c 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x1c>;
+			clocks = <&cm24mhz>;
+		};
+	};
+
+	syscon {
+		compatible = "arm,integrator-ap-syscon", "syscon";
+		reg = <0x11000000 0x100>;
+		ranges = <0x0 0x11000000 0x100>;
+		#size-cells = <1>;
+		#address-cells = <1>;
+
+		/*
+		 * SYSCLK clocks PCIv3 bridge, system controller and the
+		 * logic modules.
+		 */
+		sysclk: clock-controller@4 {
+			compatible = "arm,syscon-icst525-integratorap-sys";
+			reg = <0x04 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x1c>;
+			vco-offset = <0x04>;
+			clocks = <&xtal24mhz>;
+		};
+
+		/* One-bit control for the PCI bus clock (33 or 25 MHz) */
+		pciclk: clock-controller@4,8 {
+			compatible = "arm,syscon-icst525-integratorap-pci";
+			reg = <0x04 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x1c>;
+			vco-offset = <0x04>;
+			clocks = <&xtal24mhz>;
+		};
+	};
+
+	timer0: timer@13000000 {
+		compatible = "arm,integrator-timer";
+		clocks = <&xtal24mhz>;
+	};
+
+	timer1: timer@13000100 {
+		compatible = "arm,integrator-timer";
+		clocks = <&xtal24mhz>;
+	};
+
+	timer2: timer@13000200 {
+		compatible = "arm,integrator-timer";
+		clocks = <&xtal24mhz>;
+	};
+
+	pic: pic@14000000 {
+		valid-mask = <0x003fffff>;
+	};
+
+	pci: pci@62000000 {
+		compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		/* Bridge registers and config access space */
+		reg = <0x62000000 0x10000>, <0x61000000 0x01000000>;
+		interrupt-parent = <&pic>;
+		interrupts = <17>; /* Bus error IRQ */
+		clocks = <&pciclk>;
+		bus-range = <0x00 0xff>;
+		ranges = <0x01000000 0 0x0000000 /* I/O space @00000000 */
+			0x60000000 0 0x00010000 /* 64 KB @ LB 60000000 */
+			0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */
+			0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */
+			0x42000000 0 0x50000000 /* prefetchable memory @50000000 */
+			0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */
+		dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */
+			0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */
+			0x02000000 0 0x80000000 /* Core module alias memory */
+			0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */
+		interrupt-map-mask = <0xf800 0 0 0x7>;
+		interrupt-map = <
+		/* IDSEL 9 */
+		0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */
+		0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */
+		0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */
+		0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */
+		/* IDSEL 10 */
+		0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */
+		0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */
+		0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */
+		0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */
+		/* IDSEL 11 */
+		0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */
+		0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */
+		0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */
+		0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */
+		/* IDSEL 12 */
+		0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */
+		0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */
+		0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */
+		0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */
+		>;
+	};
+
+	fpga {
+		/*
+		 * The Integator/AP predates the idea to have magic numbers
+		 * identifying the PrimeCell in hardware, thus we have to
+		 * supply these from the device tree.
+		 */
+		rtc: rtc@15000000 {
+			compatible = "arm,pl030", "arm,primecell";
+			arm,primecell-periphid = <0x00041030>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		uart0: serial@16000000 {
+			compatible = "arm,pl010", "arm,primecell";
+			arm,primecell-periphid = <0x00041010>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart1: serial@17000000 {
+			compatible = "arm,pl010", "arm,primecell";
+			arm,primecell-periphid = <0x00041010>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		kmi0: kmi@18000000 {
+			compatible = "arm,pl050", "arm,primecell";
+			arm,primecell-periphid = <0x00041050>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi1: kmi@19000000 {
+			compatible = "arm,pl050", "arm,primecell";
+			arm,primecell-periphid = <0x00041050>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+	};
+
+	/*
+	 * Logic module bus, we support up to 4 logical modules
+	 * They appear at 0xc0000000, 0xd0000000, 0xe0000000 and 0xf0000000
+	 * and use interrupts 9, 10, 11 and 12 respectively.
+	 */
+	bus@c0000000 {
+		compatible = "arm,integrator-ap-lm";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0xc0000000 0xc0000000 0x40000000>;
+		dma-ranges;
+
+		lm0: bus@c0000000 {
+			compatible = "simple-bus";
+			ranges = <0x00000000 0xc0000000 0x10000000>;
+			dma-ranges = <0x00000000 0xc0000000 0x10000000>;
+			reg = <0xc0000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+		lm1: bus@d0000000 {
+			compatible = "simple-bus";
+			ranges = <0x00000000 0xd0000000 0x10000000>;
+			dma-ranges = <0x00000000 0xd0000000 0x10000000>;
+			reg = <0xd0000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+		lm2: bus@e0000000 {
+			compatible = "simple-bus";
+			ranges = <0x00000000 0xe0000000 0x10000000>;
+			dma-ranges = <0x00000000 0xe0000000 0x10000000>;
+			reg = <0xe0000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+		lm3: bus@f0000000 {
+			compatible = "simple-bus";
+			ranges = <0x00000000 0xf0000000 0x10000000>;
+			dma-ranges = <0x00000000 0xf0000000 0x10000000>;
+			reg = <0xf0000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/arm/integratorcp.dts
index 97f38b57a702..8ad1a8957ace 100644
--- a/arch/arm/boot/dts/integratorcp.dts
+++ b/arch/arm/boot/dts/arm/integratorcp.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree for the ARM Integrator/CP platform
  */
@@ -46,14 +47,14 @@
 	 */
 
 	/* The codec chrystal operates at 24.576 MHz */
-	xtal_codec: xtal24.576@24.576M {
+	xtal_codec: clock-24576000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24576000>;
 	};
 
 	/* The chrystal is divided by 2 by the codec for the AACI bit clock */
-	aaci_bitclk: aaci_bitclk@12.288M {
+	aaci_bitclk: clock-12288000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <2>;
@@ -62,21 +63,21 @@
 	};
 
 	/* This is a 25MHz chrystal on the base board */
-	xtal25mhz: xtal25mhz@25M {
+	xtal25mhz: clock-25000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <25000000>;
 	};
 
 	/* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
-	uartclk: uartclk@14.74M {
+	uartclk: clock-14745600 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <14745600>;
 	};
 
 	/* Actually sysclk I think */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
@@ -84,15 +85,16 @@
 
 	core-module@10000000 {
 		/* 24 MHz chrystal on the core module */
-		cm24mhz: cm24mhz@24M {
+		cm24mhz: clock-24000000 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
 		};
 
 		/* Oscillator on the core module, clocks the CPU core */
-		cmcore: cmosc@24M {
+		cmcore: clock-controller@8 {
 			compatible = "arm,syscon-icst525-integratorcp-cm-core";
+			reg = <0x08 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x14>;
 			vco-offset = <0x08>;
@@ -100,8 +102,9 @@
 		};
 
 		/* Oscillator on the core module, clocks the memory bus */
-		cmmem: cmosc@24M {
+		cmmem: clock-controller@8,12 {
 			compatible = "arm,syscon-icst525-integratorcp-cm-mem";
+			reg = <0x08 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x14>;
 			vco-offset = <0x08>;
@@ -109,8 +112,9 @@
 		};
 
 		/* Auxilary oscillator on the core module, clocks the CLCD */
-		auxosc: auxosc@24M {
+		auxosc: clock-controller@1c {
 			compatible = "arm,syscon-icst525";
+			reg = <0x1c 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x14>;
 			vco-offset = <0x1c>;
@@ -127,7 +131,7 @@
 		};
 
 		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
-		timclk: timclk@1M {
+		timclk: clock-1000000 {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
 			clock-div = <24>;
@@ -191,6 +195,43 @@
 		interrupts = <27>;
 	};
 
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads_vga_dac>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
 	fpga {
 		/*
 		 * These PrimeCells are at the same location and using
@@ -203,13 +244,13 @@
 			clock-names = "apb_pclk";
 		};
 
-		uart@16000000 {
+		serial@16000000 {
 			compatible = "arm,pl011", "arm,primecell";
 			clocks = <&uartclk>, <&pclk>;
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		uart@17000000 {
+		serial@17000000 {
 			compatible = "arm,pl011", "arm,primecell";
 			clocks = <&uartclk>, <&pclk>;
 			clock-names = "uartclk", "apb_pclk";
@@ -253,39 +294,27 @@
 			interrupts = <22>;
 			clocks = <&auxosc>, <&pclk>;
 			clock-names = "clcdclk", "apb_pclk";
+			/* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */
+			max-memory-bandwidth = <40000000>;
 
-			port {
-				/*
-				 * The VGA connected is implemented with a
-				 * THS8134A triple DAC that can be run in 24bit
-				 * or 16bit RGB mode.
-				 */
-				clcd_pads: endpoint {
-					remote-endpoint = <&clcd_panel>;
-					arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
-				};
-			};
-
-			panel {
-				compatible = "panel-dpi";
-
-				port {
-					clcd_panel: endpoint {
-						remote-endpoint = <&clcd_pads>;
-					};
-				};
-
-				/* Standard 640x480 VGA timings */
-				panel-timing {
-					clock-frequency = <25175000>;
-					hactive = <640>;
-					hback-porch = <48>;
-					hfront-porch = <16>;
-					hsync-len = <96>;
-					vactive = <480>;
-					vback-porch = <33>;
-					vfront-porch = <10>;
-					vsync-len = <2>;
+			/*
+			 * This port is routed through a PLD (Programmable
+			 * Logic Device) that routes the output from the CLCD
+			 * (after transformations) to the VGA DAC and also an
+			 * external panel connector. The PLD is essential for
+			 * supporting RGB565/BGR565.
+			 *
+			 * The signals from the port thus reaches two endpoints.
+			 * The PLD is managed through a few special bits in the
+			 * FPGA "sysreg".
+			 *
+			 * This arrangement can be clearly seen in
+			 * ARM DUI 0225D, page 3-41, figure 3-19.
+			 */
+			port@0 {
+				clcd_pads_vga_dac: endpoint {
+					remote-endpoint = <&vga_bridge_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/mps2-an385.dts b/arch/arm/boot/dts/arm/mps2-an385.dts
index aebbebfc25d1..aebbebfc25d1 100644
--- a/arch/arm/boot/dts/mps2-an385.dts
+++ b/arch/arm/boot/dts/arm/mps2-an385.dts
diff --git a/arch/arm/boot/dts/mps2-an399.dts b/arch/arm/boot/dts/arm/mps2-an399.dts
index 349abf70b2a5..349abf70b2a5 100644
--- a/arch/arm/boot/dts/mps2-an399.dts
+++ b/arch/arm/boot/dts/arm/mps2-an399.dts
diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/arm/mps2.dtsi
index 23467390558d..e240bc8aa605 100644
--- a/arch/arm/boot/dts/mps2.dtsi
+++ b/arch/arm/boot/dts/arm/mps2.dtsi
@@ -42,43 +42,43 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "armv7-m.dtsi"
+#include "../armv7-m.dtsi"
 
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	oscclk0: clk-osc0 {
+	oscclk0: clock-50000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
 	};
 
-	oscclk1: clk-osc1 {
+	oscclk1: clock-24576000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24576000>;
 	};
 
-	oscclk2: clk-osc2 {
+	oscclk2: clock-25000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 	};
 
-	cfgclk: clk-cfg {
+	cfgclk: clock-5000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <5000000>;
 	};
 
-	spicfgclk: clk-spicfg {
+	spicfgclk: clock-75000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <75000000>;
 	};
 
-	sysclk: clk-sys {
+	sysclk: spiclcd: spicon: i2cclcd: i2caud: clock-sys {
 		compatible = "fixed-factor-clock";
 		clocks = <&oscclk0>;
 		#clock-cells = <0>;
@@ -86,7 +86,7 @@
 		clock-mult = <1>;
 	};
 
-	audmclk: clk-audm {
+	audmclk: clk-12388000 {
 		compatible = "fixed-factor-clock";
 		clocks = <&oscclk1>;
 		#clock-cells = <0>;
@@ -94,7 +94,7 @@
 		clock-mult = <1>;
 	};
 
-	audsclk: clk-auds {
+	audsclk: clk-3072000 {
 		compatible = "fixed-factor-clock";
 		clocks = <&oscclk1>;
 		#clock-cells = <0>;
@@ -102,38 +102,6 @@
 		clock-mult = <1>;
 	};
 
-	spiclcd: clk-cpiclcd {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	spicon: clk-spicon {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	i2cclcd: clk-i2cclcd {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	i2caud: clk-i2caud {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
 	soc {
 		compatible = "simple-bus";
 		ranges;
@@ -161,9 +129,11 @@
 			};
 
 			timer2: dual-timer@2000 {
-				compatible = "arm,sp804";
+				compatible = "arm,sp804", "arm,primecell";
 				reg = <0x2000 0x1000>;
-				clocks = <&sysclk>;
+				clocks = <&sysclk>, <&sysclk>, <&sysclk>;
+				clock-names = "timer0clk", "timer1clk",
+					       "apb_pclk";
 				interrupts = <10>;
 				status = "disabled";
 			};
@@ -171,7 +141,7 @@
 			uart0: serial@4000 {
 				compatible = "arm,mps2-uart";
 				reg = <0x4000 0x1000>;
-				interrupts = <0 1 12>;
+				interrupts = <0>, <1>, <12>;
 				clocks = <&sysclk>;
 				status = "disabled";
 			};
@@ -179,7 +149,7 @@
 			uart1: serial@5000 {
 				compatible = "arm,mps2-uart";
 				reg = <0x5000 0x1000>;
-				interrupts = <2 3 12>;
+				interrupts = <2>, <3>, <12>;
 				clocks = <&sysclk>;
 				status = "disabled";
 			};
@@ -187,7 +157,7 @@
 			uart2: serial@6000 {
 				compatible = "arm,mps2-uart";
 				reg = <0x6000 0x1000>;
-				interrupts = <4 5 12>;
+				interrupts = <4>, <5>, <12>;
 				clocks = <&sysclk>;
 				status = "disabled";
 			};
@@ -197,8 +167,8 @@
 				arm,primecell-periphid = <0x00141805>;
 				reg = <0x8000 0x1000>;
 				interrupts = <0>;
-				clocks = <&sysclk>;
-				clock-names = "apb_pclk";
+				clocks = <&sysclk>, <&sysclk>;
+				clock-names = "wdog_clk", "apb_pclk";
 				status = "disabled";
 			};
 		};
@@ -214,8 +184,13 @@
 			compatible = "syscon", "simple-mfd";
 			reg = <0x8000 0x10>;
 
-			led0 {
+			ranges = <0x0 0x8000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			led@0,0 {
 				compatible = "register-bit-led";
+				reg = <0x00 0x04>;
 				offset = <0x0>;
 				mask = <0x01>;
 				label = "userled:0";
@@ -223,8 +198,9 @@
 				default-state = "on";
 			};
 
-			led1 {
+			led@0,1 {
 				compatible = "register-bit-led";
+				reg = <0x00 0x04>;
 				offset = <0x0>;
 				mask = <0x02>;
 				label = "userled:1";
diff --git a/arch/arm/boot/dts/arm/versatile-ab-ib2.dts b/arch/arm/boot/dts/arm/versatile-ab-ib2.dts
new file mode 100644
index 000000000000..7ebb0dfd0467
--- /dev/null
+++ b/arch/arm/boot/dts/arm/versatile-ab-ib2.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * The Versatile AB with the IB2 expansion board mounted.
+ * This works as a superset of the Versatile AB.
+ */
+
+#include "versatile-ab.dts"
+
+/ {
+	model = "ARM Versatile AB + IB2 board";
+
+	/* Special IB2 control register */
+	syscon@27000000 {
+		compatible = "arm,versatile-ib2-syscon", "syscon", "simple-mfd";
+		reg = <0x27000000 0x4>;
+		ranges = <0x0 0x27000000 0x4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		led@0,4 {
+			compatible = "register-bit-led";
+			reg = <0x00 0x04>;
+			offset = <0x00>;
+			mask = <0x10>;
+			label = "versatile-ib2:0";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/versatile-ab.dts b/arch/arm/boot/dts/arm/versatile-ab.dts
new file mode 100644
index 000000000000..635ab9268899
--- /dev/null
+++ b/arch/arm/boot/dts/arm/versatile-ab.dts
@@ -0,0 +1,449 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/ {
+	model = "ARM Versatile AB";
+	compatible = "arm,versatile-ab";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&vic>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		i2c0 = &i2c0;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+	xtal24mhz: clock-24000000 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	bridge {
+		compatible = "ti,ths8134b", "ti,ths8134";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads_vga_dac>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+		label = "J1";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	core-module@10000000 {
+		compatible = "arm,core-module-versatile", "syscon", "simple-mfd";
+		reg = <0x10000000 0x200>;
+		ranges = <0x0 0x10000000 0x200>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		led@8,0 {
+			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
+			offset = <0x08>;
+			mask = <0x01>;
+			label = "versatile:0";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+		led@8,1 {
+			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
+			offset = <0x08>;
+			mask = <0x02>;
+			label = "versatile:1";
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+		led@8,2 {
+			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
+			offset = <0x08>;
+			mask = <0x04>;
+			label = "versatile:2";
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+		led@8,3 {
+			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
+			offset = <0x08>;
+			mask = <0x08>;
+			label = "versatile:3";
+			default-state = "off";
+		};
+		led@8,4 {
+			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
+			offset = <0x08>;
+			mask = <0x10>;
+			label = "versatile:4";
+			default-state = "off";
+		};
+		led@8,5 {
+			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
+			offset = <0x08>;
+			mask = <0x20>;
+			label = "versatile:5";
+			default-state = "off";
+		};
+		led@8,6 {
+			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
+			offset = <0x08>;
+			mask = <0x40>;
+			label = "versatile:6";
+			default-state = "off";
+		};
+		led@8,7 {
+			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
+			offset = <0x08>;
+			mask = <0x80>;
+			label = "versatile:7";
+			default-state = "off";
+		};
+
+		/* OSC1 on AB, OSC4 on PB */
+		osc1: clock-osc {
+			#clock-cells = <0>;
+			compatible = "arm,versatile-cm-auxosc";
+			clocks = <&xtal24mhz>;
+		};
+
+		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
+		timclk: clock-1000000 {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <24>;
+			clock-mult = <1>;
+			clocks = <&xtal24mhz>;
+		};
+
+		pclk: clock-pclk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&xtal24mhz>;
+		};
+	};
+
+	flash@34000000 {
+		/* 64 MiB NOR flash in non-interleaved chips */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x34000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	i2c0: i2c@10002000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "arm,versatile-i2c";
+		reg = <0x10002000 0x1000>;
+
+		rtc@68 {
+			compatible = "dallas,ds1338";
+			reg = <0x68>;
+		};
+	};
+
+	net@10010000 {
+		compatible = "smsc,lan91c111";
+		reg = <0x10010000 0x10000>;
+		interrupts = <25>;
+	};
+
+	lcd@10008000 {
+		compatible = "arm,versatile-lcd";
+		reg = <0x10008000 0x1000>;
+	};
+
+	amba {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vic: interrupt-controller@10140000 {
+			compatible = "arm,versatile-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x10140000 0x1000>;
+			valid-mask = <0xffffffff>;
+		};
+
+		sic: interrupt-controller@10003000 {
+			compatible = "arm,versatile-sic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x10003000 0x1000>;
+			interrupt-parent = <&vic>;
+			interrupts = <31>; /* Cascaded to vic */
+			clear-mask = <0xffffffff>;
+			/*
+			 * Valid interrupt lines mask according to
+			 * table 4-36 page 4-50 of ARM DUI 0225D
+			 */
+			valid-mask = <0x0760031b>;
+		};
+
+		dma@10130000 {
+			compatible = "arm,pl081", "arm,primecell";
+			reg = <0x10130000 0x1000>;
+			interrupts = <17>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		uart0: serial@101f1000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101f1000 0x1000>;
+			interrupts = <12>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart1: serial@101f2000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101f2000 0x1000>;
+			interrupts = <13>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart2: serial@101f3000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101f3000 0x1000>;
+			interrupts = <14>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		smc@10100000 {
+			compatible = "arm,primecell";
+			reg = <0x10100000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		mpmc@10110000 {
+			compatible = "arm,primecell";
+			reg = <0x10110000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		display@10120000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0x10120000 0x1000>;
+			interrupts = <16>;
+			clocks = <&osc1>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			/* 800x600 16bpp @ 36MHz works fine */
+			max-memory-bandwidth = <54000000>;
+
+			/*
+			 * This port is routed through a PLD (Programmable
+			 * Logic Device) that routes the output from the CLCD
+			 * (after transformations) to the VGA DAC and also an
+			 * external panel connector. The PLD is essential for
+			 * supporting RGB565/BGR565.
+			 *
+			 * The signals from the port thus reaches two endpoints.
+			 * The PLD is managed through a few special bits in the
+			 * FPGA "sysreg".
+			 *
+			 * This arrangement can be clearly seen in
+			 * ARM DUI 0225D, page 3-41, figure 3-19.
+			 */
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				clcd_pads_panel: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&panel_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+				clcd_pads_vga_dac: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vga_bridge_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+		};
+
+		sctl@101e0000 {
+			compatible = "arm,primecell";
+			reg = <0x101e0000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		watchdog@101e1000 {
+			compatible = "arm,primecell";
+			reg = <0x101e1000 0x1000>;
+			interrupts = <0>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		timer@101e2000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x101e2000 0x1000>;
+			interrupts = <4>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer0", "timer1", "apb_pclk";
+		};
+
+		timer@101e3000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x101e3000 0x1000>;
+			interrupts = <5>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer0", "timer1", "apb_pclk";
+		};
+
+		gpio0: gpio@101e4000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x101e4000 0x1000>;
+			gpio-controller;
+			interrupts = <6>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@101e5000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x101e5000 0x1000>;
+			interrupts = <7>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		rtc@101e8000 {
+			compatible = "arm,pl030", "arm,primecell";
+			reg = <0x101e8000 0x1000>;
+			interrupts = <10>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		sci@101f0000 {
+			compatible = "arm,primecell";
+			reg = <0x101f0000 0x1000>;
+			interrupts = <15>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		spi@101f4000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x101f4000 0x1000>;
+			interrupts = <11>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "sspclk", "apb_pclk";
+		};
+
+		fpga {
+			compatible = "arm,versatile-fpga", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x10000000 0x10000>;
+
+			sysreg@0 {
+				compatible = "arm,versatile-sysreg", "syscon", "simple-mfd";
+				reg = <0x00000 0x1000>;
+
+				panel: display@0 {
+					compatible = "arm,versatile-tft-panel";
+
+					port {
+						panel_in: endpoint {
+							remote-endpoint = <&clcd_pads_panel>;
+						};
+					};
+				};
+			};
+
+			aaci@4000 {
+				compatible = "arm,primecell";
+				reg = <0x4000 0x1000>;
+				interrupts = <24>;
+				clocks = <&pclk>;
+				clock-names = "apb_pclk";
+			};
+			mmc@5000 {
+				compatible = "arm,pl180", "arm,primecell";
+				reg = <0x5000 0x1000>;
+				interrupts-extended = <&vic 22 &sic 1>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "mclk", "apb_pclk";
+			};
+			kmi@6000 {
+				compatible = "arm,pl050", "arm,primecell";
+				reg = <0x6000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <3>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "KMIREFCLK", "apb_pclk";
+			};
+			kmi@7000 {
+				compatible = "arm,pl050", "arm,primecell";
+				reg = <0x7000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <4>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "KMIREFCLK", "apb_pclk";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/arm/versatile-pb.dts
index 06e2331f666d..fc21ce54b33a 100644
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/arm/versatile-pb.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #include "versatile-ab.dts"
 
 / {
@@ -6,7 +7,7 @@
 
 	amba {
 		/* The Versatile PB is using more SIC IRQ lines than the AB */
-		sic: intc@10003000 {
+		sic: interrupt-controller@10003000 {
 			clear-mask = <0xffffffff>;
 			/*
 			 * Valid interrupt lines mask according to
@@ -39,7 +40,7 @@
 			clock-names = "apb_pclk";
 		};
 
-		pci-controller@10001000 {
+		pci@10001000 {
 			compatible = "arm,versatile-pci";
 			device_type = "pci";
 			reg = <0x10001000 0x1000
@@ -84,7 +85,7 @@
 				 */
 				interrupts-extended = <&sic 22 &sic 23>;
 			};
-			uart@9000 {
+			serial@9000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x9000 0x1000>;
 				interrupt-parent = <&sic>;
diff --git a/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi
new file mode 100644
index 000000000000..158b3923eae3
--- /dev/null
+++ b/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi
@@ -0,0 +1,494 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * Motherboard Express uATX
+ * V2M-P1
+ *
+ * HBI-0190D
+ *
+ * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
+ * Technical Reference Manual)
+ *
+ * WARNING! The hardware described in this file is independent from the
+ * original variant (vexpress-v2m.dtsi), but there is a strong
+ * correspondence between the two configurations.
+ *
+ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
+ * CHANGES TO vexpress-v2m.dtsi!
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	v2m_fixed_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	v2m_clk24mhz: clock-24000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "v2m:clk24mhz";
+	};
+
+	v2m_refclk1mhz: clock-1000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000>;
+		clock-output-names = "v2m:refclk1mhz";
+	};
+
+	v2m_refclk32khz: clock-32768 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "v2m:refclk32khz";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			label = "v2m:green:user1";
+			gpios = <&v2m_led_gpios 0 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			label = "v2m:green:user2";
+			gpios = <&v2m_led_gpios 1 0>;
+			linux,default-trigger = "disk-activity";
+		};
+
+		led-3 {
+			label = "v2m:green:user3";
+			gpios = <&v2m_led_gpios 2 0>;
+			linux,default-trigger = "cpu0";
+		};
+
+		led-4 {
+			label = "v2m:green:user4";
+			gpios = <&v2m_led_gpios 3 0>;
+			linux,default-trigger = "cpu1";
+		};
+
+		led-5 {
+			label = "v2m:green:user5";
+			gpios = <&v2m_led_gpios 4 0>;
+			linux,default-trigger = "cpu2";
+		};
+
+		led-6 {
+			label = "v2m:green:user6";
+			gpios = <&v2m_led_gpios 5 0>;
+			linux,default-trigger = "cpu3";
+		};
+
+		led-7 {
+			label = "v2m:green:user7";
+			gpios = <&v2m_led_gpios 6 0>;
+			linux,default-trigger = "cpu4";
+		};
+
+		led-8 {
+			label = "v2m:green:user8";
+			gpios = <&v2m_led_gpios 7 0>;
+			linux,default-trigger = "cpu5";
+		};
+	};
+
+	bus@8000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 63>;
+		interrupt-map = <0  0 &gic GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0  1 &gic GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0  2 &gic GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0  3 &gic GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0  4 &gic GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0  5 &gic GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0  6 &gic GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0  7 &gic GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0  8 &gic GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0  9 &gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+		motherboard-bus@8000000 {
+			arm,hbi = <0x190>;
+			arm,vexpress,site = <0>;
+			compatible = "arm,vexpress,v2m-p1", "simple-bus";
+			#address-cells = <2>; /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			ranges = <0 0 0x08000000 0x04000000>,
+				 <1 0 0x14000000 0x04000000>,
+				 <2 0 0x18000000 0x04000000>,
+				 <3 0 0x1c000000 0x04000000>,
+				 <4 0 0x0c000000 0x04000000>,
+				 <5 0 0x10000000 0x04000000>;
+
+			nor_flash: flash@0 {
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				reg = <0 0x00000000 0x04000000>,
+				      <4 0x00000000 0x04000000>;
+				bank-width = <4>;
+				partitions {
+					compatible = "arm,arm-firmware-suite";
+				};
+			};
+
+			psram@100000000 {
+				compatible = "arm,vexpress-psram", "mtd-ram";
+				reg = <1 0x00000000 0x02000000>;
+				bank-width = <4>;
+			};
+
+			ethernet@202000000 {
+				compatible = "smsc,lan9118", "smsc,lan9115";
+				reg = <2 0x02000000 0x10000>;
+				interrupts = <15>;
+				phy-mode = "mii";
+				reg-io-width = <4>;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
+				vdd33a-supply = <&v2m_fixed_3v3>;
+				vddvario-supply = <&v2m_fixed_3v3>;
+			};
+
+			usb@203000000 {
+				compatible = "nxp,usb-isp1761";
+				reg = <2 0x03000000 0x20000>;
+				interrupts = <16>;
+				dr_mode = "peripheral";
+			};
+
+			iofpga-bus@300000000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 3 0 0x200000>;
+
+				v2m_sysreg: sysreg@10000 {
+					compatible = "arm,vexpress-sysreg";
+					reg = <0x010000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x10000 0x1000>;
+
+					v2m_led_gpios: gpio@8 {
+						compatible = "arm,vexpress-sysreg,sys_led";
+						reg = <0x008 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_mmc_gpios: gpio@48 {
+						compatible = "arm,vexpress-sysreg,sys_mci";
+						reg = <0x048 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_flash_gpios: gpio@4c {
+						compatible = "arm,vexpress-sysreg,sys_flash";
+						reg = <0x04c 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+				};
+
+				v2m_sysctl: sysctl@20000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x020000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+				};
+
+				/* PCI-E I2C bus */
+				v2m_i2c_pcie: i2c@30000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x030000 0x1000>;
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pcie-switch@60 {
+						compatible = "idt,89hpes32h8";
+						reg = <0x60>;
+					};
+				};
+
+				aaci@40000 {
+					compatible = "arm,pl041", "arm,primecell";
+					reg = <0x040000 0x1000>;
+					interrupts = <11>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				mmc@50000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x050000 0x1000>;
+					interrupts = <9>, <10>;
+					cd-gpios = <&v2m_mmc_gpios 0 0>;
+					wp-gpios = <&v2m_mmc_gpios 1 0>;
+					max-frequency = <12000000>;
+					vmmc-supply = <&v2m_fixed_3v3>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "mclk", "apb_pclk";
+				};
+
+				kmi@60000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x060000 0x1000>;
+					interrupts = <12>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				kmi@70000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x070000 0x1000>;
+					interrupts = <13>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				v2m_serial0: serial@90000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x090000 0x1000>;
+					interrupts = <5>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial1: serial@a0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0a0000 0x1000>;
+					interrupts = <6>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial2: serial@b0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0b0000 0x1000>;
+					interrupts = <7>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial3: serial@c0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0c0000 0x1000>;
+					interrupts = <8>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				watchdog@f0000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f0000 0x1000>;
+					interrupts = <0>;
+					clocks = <&v2m_refclk32khz>, <&smbclk>;
+					clock-names = "wdog_clk", "apb_pclk";
+				};
+
+				v2m_timer01: timer@110000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x110000 0x1000>;
+					interrupts = <2>;
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				v2m_timer23: timer@120000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x120000 0x1000>;
+					interrupts = <3>;
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				/* DVI I2C bus */
+				v2m_i2c_dvi: i2c@160000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x160000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dvi-transmitter@39 {
+						compatible = "sil,sii9022-tpi", "sil,sii9022";
+						reg = <0x39>;
+
+						ports {
+							#address-cells = <1>;
+							#size-cells = <0>;
+
+							port@0 {
+								reg = <0>;
+								dvi_bridge_in: endpoint {
+									remote-endpoint = <&clcd_pads>;
+								};
+							};
+						};
+					};
+
+					dvi-transmitter@60 {
+						compatible = "sil,sii9022-cpi", "sil,sii9022";
+						reg = <0x60>;
+					};
+				};
+
+				rtc@170000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x170000 0x1000>;
+					interrupts = <4>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				compact-flash@1a0000 {
+					compatible = "arm,vexpress-cf", "ata-generic";
+					reg = <0x1a0000 0x100
+					       0x1a0100 0xf00>;
+					reg-shift = <2>;
+				};
+
+				clcd@1f0000 {
+					compatible = "arm,pl111", "arm,primecell";
+					reg = <0x1f0000 0x1000>;
+					interrupt-names = "combined";
+					interrupts = <14>;
+					clocks = <&v2m_oscclk1>, <&smbclk>;
+					clock-names = "clcdclk", "apb_pclk";
+					/* 800x600 16bpp @36MHz works fine */
+					max-memory-bandwidth = <54000000>;
+					memory-region = <&vram>;
+
+					port {
+						clcd_pads: endpoint {
+							remote-endpoint = <&dvi_bridge_in>;
+							arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+						};
+					};
+				};
+
+				mcc {
+					compatible = "arm,vexpress,config-bus";
+					arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+					oscclk0 {
+						/* MCC static memory clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 0>;
+						freq-range = <25000000 60000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk0";
+					};
+
+					v2m_oscclk1: oscclk1 {
+						/* CLCD clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 1>;
+						freq-range = <23750000 65000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk1";
+					};
+
+					v2m_oscclk2: oscclk2 {
+						/* IO FPGA peripheral clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 2>;
+						freq-range = <24000000 24000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk2";
+					};
+
+					volt-vio {
+						/* Logic level voltage */
+						compatible = "arm,vexpress-volt";
+						arm,vexpress-sysreg,func = <2 0>;
+						regulator-name = "VIO";
+						regulator-always-on;
+						label = "VIO";
+					};
+
+					temp-mcc {
+						/* MCC internal operating temperature */
+						compatible = "arm,vexpress-temp";
+						arm,vexpress-sysreg,func = <4 0>;
+						label = "MCC";
+					};
+
+					reset {
+						compatible = "arm,vexpress-reset";
+						arm,vexpress-sysreg,func = <5 0>;
+					};
+
+					muxfpga {
+						compatible = "arm,vexpress-muxfpga";
+						arm,vexpress-sysreg,func = <7 0>;
+					};
+
+					shutdown {
+						compatible = "arm,vexpress-shutdown";
+						arm,vexpress-sysreg,func = <8 0>;
+					};
+
+					reboot {
+						compatible = "arm,vexpress-reboot";
+						arm,vexpress-sysreg,func = <9 0>;
+					};
+
+					dvimode {
+						compatible = "arm,vexpress-dvimode";
+						arm,vexpress-sysreg,func = <11 0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/vexpress-v2m.dtsi b/arch/arm/boot/dts/arm/vexpress-v2m.dtsi
new file mode 100644
index 000000000000..be03f2a8a57a
--- /dev/null
+++ b/arch/arm/boot/dts/arm/vexpress-v2m.dtsi
@@ -0,0 +1,509 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * Motherboard Express uATX
+ * V2M-P1
+ *
+ * HBI-0190D
+ *
+ * Original memory map ("Legacy memory map" in the board's
+ * Technical Reference Manual)
+ *
+ * WARNING! The hardware described in this file is independent from the
+ * RS1 variant (vexpress-v2m-rs1.dtsi), but there is a strong
+ * correspondence between the two configurations.
+ *
+ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
+ * CHANGES TO vexpress-v2m-rs1.dtsi!
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	bus@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x40000000 0x40000000 0x10000000>,
+			 <0x10000000 0x10000000 0x00020000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 63>;
+		interrupt-map = <0  0 &gic GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0  1 &gic GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0  2 &gic GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0  3 &gic GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0  4 &gic GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0  5 &gic GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0  6 &gic GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0  7 &gic GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0  8 &gic GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0  9 &gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+		motherboard-bus@40000000 {
+			arm,hbi = <0x190>;
+			arm,vexpress,site = <0>;
+			compatible = "arm,vexpress,v2m-p1", "simple-bus";
+			#address-cells = <2>; /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			ranges = <0 0 0x40000000 0x04000000>,
+				 <1 0 0x44000000 0x04000000>,
+				 <2 0 0x48000000 0x04000000>,
+				 <3 0 0x4c000000 0x04000000>,
+				 <7 0 0x10000000 0x00020000>;
+
+			flash@0,00000000 {
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				reg = <0 0x00000000 0x04000000>,
+				      <1 0x00000000 0x04000000>;
+				bank-width = <4>;
+				partitions {
+					compatible = "arm,arm-firmware-suite";
+				};
+			};
+
+			psram@2,00000000 {
+				compatible = "arm,vexpress-psram", "mtd-ram";
+				reg = <2 0x00000000 0x02000000>;
+				bank-width = <4>;
+			};
+
+			ethernet@3,02000000 {
+				compatible = "smsc,lan9118", "smsc,lan9115";
+				reg = <3 0x02000000 0x10000>;
+				interrupts = <15>;
+				phy-mode = "mii";
+				reg-io-width = <4>;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
+				vdd33a-supply = <&v2m_fixed_3v3>;
+				vddvario-supply = <&v2m_fixed_3v3>;
+			};
+
+			usb@3,03000000 {
+				compatible = "nxp,usb-isp1761";
+				reg = <3 0x03000000 0x20000>;
+				interrupts = <16>;
+				dr_mode = "peripheral";
+			};
+
+			iofpga@7,00000000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 7 0 0x20000>;
+
+				v2m_sysreg: sysreg@0 {
+					compatible = "arm,vexpress-sysreg";
+					reg = <0x00000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0 0x1000>;
+
+					v2m_led_gpios: gpio@8 {
+						compatible = "arm,vexpress-sysreg,sys_led";
+						reg = <0x008 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_mmc_gpios: gpio@48 {
+						compatible = "arm,vexpress-sysreg,sys_mci";
+						reg = <0x048 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_flash_gpios: gpio@4c {
+						compatible = "arm,vexpress-sysreg,sys_flash";
+						reg = <0x04c 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+				};
+
+				v2m_sysctl: sysctl@1000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x01000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+				};
+
+				/* PCI-E I2C bus */
+				v2m_i2c_pcie: i2c@2000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x02000 0x1000>;
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pcie-switch@60 {
+						compatible = "idt,89hpes32h8";
+						reg = <0x60>;
+					};
+				};
+
+				aaci@4000 {
+					compatible = "arm,pl041", "arm,primecell";
+					reg = <0x04000 0x1000>;
+					interrupts = <11>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				mmci@5000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x05000 0x1000>;
+					interrupts = <9>, <10>;
+					cd-gpios = <&v2m_mmc_gpios 0 0>;
+					wp-gpios = <&v2m_mmc_gpios 1 0>;
+					max-frequency = <12000000>;
+					vmmc-supply = <&v2m_fixed_3v3>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "mclk", "apb_pclk";
+				};
+
+				kmi@6000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x06000 0x1000>;
+					interrupts = <12>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				kmi@7000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x07000 0x1000>;
+					interrupts = <13>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				v2m_serial0: serial@9000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x09000 0x1000>;
+					interrupts = <5>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial1: serial@a000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0a000 0x1000>;
+					interrupts = <6>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial2: serial@b000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0b000 0x1000>;
+					interrupts = <7>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial3: serial@c000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0c000 0x1000>;
+					interrupts = <8>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				wdt@f000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f000 0x1000>;
+					interrupts = <0>;
+					clocks = <&v2m_refclk32khz>, <&smbclk>;
+					clock-names = "wdog_clk", "apb_pclk";
+				};
+
+				v2m_timer01: timer@11000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x11000 0x1000>;
+					interrupts = <2>;
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				v2m_timer23: timer@12000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x12000 0x1000>;
+					interrupts = <3>;
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				/* DVI I2C bus */
+				v2m_i2c_dvi: i2c@16000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x16000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dvi-transmitter@39 {
+						compatible = "sil,sii9022-tpi", "sil,sii9022";
+						reg = <0x39>;
+
+						ports {
+							#address-cells = <1>;
+							#size-cells = <0>;
+
+							/*
+							 * Both the core tile and the motherboard routes their output
+							 * pads to this transmitter. The motherboard system controller
+							 * can select one of them as input using a mux register in
+							 * "arm,vexpress-muxfpga". The Vexpress with the CA9 core tile is
+							 * the only platform with this specific set-up.
+							 */
+							port@0 {
+								reg = <0>;
+								dvi_bridge_in_ct: endpoint {
+									remote-endpoint = <&clcd_pads_ct>;
+								};
+							};
+							port@1 {
+								reg = <1>;
+								dvi_bridge_in_mb: endpoint {
+									remote-endpoint = <&clcd_pads_mb>;
+								};
+							};
+						};
+					};
+
+					dvi-transmitter@60 {
+						compatible = "sil,sii9022-cpi", "sil,sii9022";
+						reg = <0x60>;
+					};
+				};
+
+				rtc@17000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x17000 0x1000>;
+					interrupts = <4>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				compact-flash@1a000 {
+					compatible = "arm,vexpress-cf", "ata-generic";
+					reg = <0x1a000 0x100
+					       0x1a100 0xf00>;
+					reg-shift = <2>;
+				};
+
+
+				clcd@1f000 {
+					compatible = "arm,pl111", "arm,primecell";
+					reg = <0x1f000 0x1000>;
+					interrupt-names = "combined";
+					interrupts = <14>;
+					clocks = <&v2m_oscclk1>, <&smbclk>;
+					clock-names = "clcdclk", "apb_pclk";
+					/* 800x600 16bpp @36MHz works fine */
+					max-memory-bandwidth = <54000000>;
+					memory-region = <&vram>;
+
+					port {
+						clcd_pads_mb: endpoint {
+							remote-endpoint = <&dvi_bridge_in_mb>;
+							arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+						};
+					};
+				};
+			};
+
+			v2m_fixed_3v3: regulator-3v3 {
+				compatible = "regulator-fixed";
+				regulator-name = "3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			v2m_clk24mhz: clock-24000000 {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <24000000>;
+				clock-output-names = "v2m:clk24mhz";
+			};
+
+			v2m_refclk1mhz: clock-1000000 {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <1000000>;
+				clock-output-names = "v2m:refclk1mhz";
+			};
+
+			v2m_refclk32khz: clock-32768 {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <32768>;
+				clock-output-names = "v2m:refclk32khz";
+			};
+
+			leds {
+				compatible = "gpio-leds";
+
+				led-user1 {
+					label = "v2m:green:user1";
+					gpios = <&v2m_led_gpios 0 0>;
+					linux,default-trigger = "heartbeat";
+				};
+
+				led-user2 {
+					label = "v2m:green:user2";
+					gpios = <&v2m_led_gpios 1 0>;
+					linux,default-trigger = "mmc0";
+				};
+
+				led-user3 {
+					label = "v2m:green:user3";
+					gpios = <&v2m_led_gpios 2 0>;
+					linux,default-trigger = "cpu0";
+				};
+
+				led-user4 {
+					label = "v2m:green:user4";
+					gpios = <&v2m_led_gpios 3 0>;
+					linux,default-trigger = "cpu1";
+				};
+
+				led-user5 {
+					label = "v2m:green:user5";
+					gpios = <&v2m_led_gpios 4 0>;
+					linux,default-trigger = "cpu2";
+				};
+
+				led-user6 {
+					label = "v2m:green:user6";
+					gpios = <&v2m_led_gpios 5 0>;
+					linux,default-trigger = "cpu3";
+				};
+
+				led-user7 {
+					label = "v2m:green:user7";
+					gpios = <&v2m_led_gpios 6 0>;
+					linux,default-trigger = "cpu4";
+				};
+
+				led-user8 {
+					label = "v2m:green:user8";
+					gpios = <&v2m_led_gpios 7 0>;
+					linux,default-trigger = "cpu5";
+				};
+			};
+
+			mcc {
+				compatible = "arm,vexpress,config-bus";
+				arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+				clock-controller-0 {
+					/* MCC static memory clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 0>;
+					freq-range = <25000000 60000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk0";
+				};
+
+				v2m_oscclk1: clock-controller-1 {
+					/* CLCD clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 1>;
+					freq-range = <23750000 65000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk1";
+				};
+
+				v2m_oscclk2: clock-controller-2 {
+					/* IO FPGA peripheral clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 2>;
+					freq-range = <24000000 24000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk2";
+				};
+
+				regulator-vio {
+					/* Logic level voltage */
+					compatible = "arm,vexpress-volt";
+					arm,vexpress-sysreg,func = <2 0>;
+					regulator-name = "VIO";
+					regulator-always-on;
+					label = "VIO";
+				};
+
+				temp-mcc {
+					/* MCC internal operating temperature */
+					compatible = "arm,vexpress-temp";
+					arm,vexpress-sysreg,func = <4 0>;
+					label = "MCC";
+				};
+
+				reset {
+					compatible = "arm,vexpress-reset";
+					arm,vexpress-sysreg,func = <5 0>;
+				};
+
+				muxfpga {
+					compatible = "arm,vexpress-muxfpga";
+					arm,vexpress-sysreg,func = <7 0>;
+				};
+
+				shutdown {
+					compatible = "arm,vexpress-shutdown";
+					arm,vexpress-sysreg,func = <8 0>;
+				};
+
+				reboot {
+					compatible = "arm,vexpress-reboot";
+					arm,vexpress-sysreg,func = <9 0>;
+				};
+
+				dvimode {
+					compatible = "arm,vexpress-dvimode";
+					arm,vexpress-sysreg,func = <11 0>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts
new file mode 100644
index 000000000000..5a91e936edef
--- /dev/null
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A15x2 (version with Test Chip 1)
+ * Cortex-A15 MPCore (V2P-CA15)
+ *
+ * HBI-0237A
+ */
+
+/dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
+
+/ {
+	model = "V2P-CA15";
+	arm,hbi = <0x237>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* Chipselect 2 is physically at 0x18000000 */
+		vram: vram@18000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0 0x18000000 0 0x00800000>;
+			no-map;
+		};
+	};
+
+	hdlcd@2b000000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x2b000000 0 0x1000>;
+		interrupts = <0 85 4>;
+		clocks = <&hdlcd_clk>;
+		clock-names = "pxlclk";
+	};
+
+	memory-controller@2b0a0000 {
+		compatible = "arm,pl341", "arm,primecell";
+		reg = <0 0x2b0a0000 0 0x1000>;
+		clocks = <&sys_pll>;
+		clock-names = "apb_pclk";
+	};
+
+	wdt@2b060000 {
+		compatible = "arm,sp805", "arm,primecell";
+		status = "disabled";
+		reg = <0 0x2b060000 0 0x1000>;
+		interrupts = <0 98 4>;
+		clocks = <&sys_pll>, <&sys_pll>;
+		clock-names = "wdog_clk", "apb_pclk";
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0x2c001000 0 0x1000>,
+		      <0 0x2c002000 0 0x2000>,
+		      <0 0x2c004000 0 0x2000>,
+		      <0 0x2c006000 0 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	memory-controller@7ffd0000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0 0x7ffd0000 0 0x1000>;
+		interrupts = <0 86 4>,
+			     <0 87 4>;
+		clocks = <&sys_pll>;
+		clock-names = "apb_pclk";
+	};
+
+	dma@7ffb0000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0 0x7ffb0000 0 0x1000>;
+		interrupts = <0 92 4>,
+			     <0 88 4>,
+			     <0 89 4>,
+			     <0 90 4>,
+			     <0 91 4>;
+		clocks = <&sys_pll>;
+		clock-names = "apb_pclk";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <0 68 4>,
+			     <0 69 4>;
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		clock-controller-0 {
+			/* CPU PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <50000000 60000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk0";
+		};
+
+		clock-controller-4 {
+			/* Multiplexed AXI master clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <20000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk4";
+		};
+
+		hdlcd_clk: clock-controller-5 {
+			/* HDLCD PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 5>;
+			freq-range = <23750000 165000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk5";
+		};
+
+		smbclk: clock-controller-6 {
+			/* SMB clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 6>;
+			freq-range = <20000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk6";
+		};
+
+		sys_pll: clock-controller-7 {
+			/* SYS PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 7>;
+			freq-range = <20000000 60000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk7";
+		};
+
+		clock-controller-8 {
+			/* DDR2 PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 8>;
+			freq-range = <40000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk8";
+		};
+
+		regulator-cores {
+			/* CPU core voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "Cores";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+			label = "Cores";
+		};
+
+		amp-cores {
+			/* Total current for the two cores */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 0>;
+			label = "Cores";
+		};
+
+		temp-dcc {
+			/* DCC internal temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "DCC";
+		};
+
+		power-cores {
+			/* Total power */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 0>;
+			label = "Cores";
+		};
+
+		energy {
+			/* Total energy */
+			compatible = "arm,vexpress-energy";
+			arm,vexpress-sysreg,func = <13 0>;
+			label = "Cores";
+		};
+	};
+
+	bus@8000000 {
+		ranges = <0x8000000 0 0x8000000 0x18000000>;
+	};
+
+	site2: hsb@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x40000000 0x3fef0000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 3>;
+		interrupt-map = <0 0 &gic 0 36 4>,
+				<0 1 &gic 0 37 4>,
+				<0 2 &gic 0 38 4>,
+				<0 3 &gic 0 39 4>;
+	};
+};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts
index 65ecf206388c..6ef23c53d2d8 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * ARM Ltd. Versatile Express
  *
@@ -8,6 +9,7 @@
  */
 
 /dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
 
 / {
 	model = "V2P-CA15_CA7";
@@ -40,6 +42,7 @@
 			cci-control-port = <&cci_control1>;
 			cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
 			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <990>;
 		};
 
 		cpu1: cpu@1 {
@@ -49,6 +52,7 @@
 			cci-control-port = <&cci_control1>;
 			cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
 			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <990>;
 		};
 
 		cpu2: cpu@2 {
@@ -58,6 +62,7 @@
 			cci-control-port = <&cci_control2>;
 			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
 			capacity-dmips-mhz = <516>;
+			dynamic-power-coefficient = <133>;
 		};
 
 		cpu3: cpu@3 {
@@ -67,6 +72,7 @@
 			cci-control-port = <&cci_control2>;
 			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
 			capacity-dmips-mhz = <516>;
+			dynamic-power-coefficient = <133>;
 		};
 
 		cpu4: cpu@4 {
@@ -76,6 +82,7 @@
 			cci-control-port = <&cci_control2>;
 			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
 			capacity-dmips-mhz = <516>;
+			dynamic-power-coefficient = <133>;
 		};
 
 		idle-states {
@@ -102,12 +109,26 @@
 		reg = <0 0x80000000 0 0x40000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* Chipselect 2 is physically at 0x18000000 */
+		vram: vram@18000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0 0x18000000 0 0x00800000>;
+			no-map;
+		};
+	};
+
 	wdt@2a490000 {
 		compatible = "arm,sp805", "arm,primecell";
 		reg = <0 0x2a490000 0 0x1000>;
 		interrupts = <0 98 4>;
 		clocks = <&oscclk6a>, <&oscclk6a>;
-		clock-names = "wdogclk", "apb_pclk";
+		clock-names = "wdog_clk", "apb_pclk";
 	};
 
 	hdlcd@2b000000 {
@@ -202,7 +223,7 @@
 			     <1 10 0xf08>;
 	};
 
-	pmu_a15 {
+	pmu-a15 {
 		compatible = "arm,cortex-a15-pmu";
 		interrupts = <0 68 4>,
 			     <0 69 4>;
@@ -210,7 +231,7 @@
 				     <&cpu1>;
 	};
 
-	pmu_a7 {
+	pmu-a7 {
 		compatible = "arm,cortex-a7-pmu";
 		interrupts = <0 128 4>,
 			     <0 129 4>,
@@ -232,7 +253,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		oscclk0 {
+		clock-controller-0 {
 			/* A15 PLL 0 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
@@ -241,7 +262,7 @@
 			clock-output-names = "oscclk0";
 		};
 
-		oscclk1 {
+		clock-controller-1 {
 			/* A15 PLL 1 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 1>;
@@ -250,7 +271,7 @@
 			clock-output-names = "oscclk1";
 		};
 
-		oscclk2 {
+		clock-controller-2 {
 			/* A7 PLL 0 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 2>;
@@ -259,7 +280,7 @@
 			clock-output-names = "oscclk2";
 		};
 
-		oscclk3 {
+		clock-controller-3 {
 			/* A7 PLL 1 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 3>;
@@ -268,7 +289,7 @@
 			clock-output-names = "oscclk3";
 		};
 
-		oscclk4 {
+		clock-controller-4 {
 			/* External AXI master clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 4>;
@@ -277,7 +298,7 @@
 			clock-output-names = "oscclk4";
 		};
 
-		hdlcd_clk: oscclk5 {
+		hdlcd_clk: clock-controller-5 {
 			/* HDLCD PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 5>;
@@ -286,7 +307,7 @@
 			clock-output-names = "oscclk5";
 		};
 
-		smbclk: oscclk6 {
+		smbclk: clock-controller-6 {
 			/* Static memory controller clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 6>;
@@ -295,7 +316,7 @@
 			clock-output-names = "oscclk6";
 		};
 
-		oscclk7 {
+		clock-controller-7 {
 			/* SYS PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 7>;
@@ -304,7 +325,7 @@
 			clock-output-names = "oscclk7";
 		};
 
-		oscclk8 {
+		clock-controller-8 {
 			/* DDR2 PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 8>;
@@ -313,7 +334,7 @@
 			clock-output-names = "oscclk8";
 		};
 
-		volt-a15 {
+		regulator-a15 {
 			/* A15 CPU core voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 0>;
@@ -324,7 +345,7 @@
 			label = "A15 Vcore";
 		};
 
-		volt-a7 {
+		regulator-a7 {
 			/* A7 CPU core voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 1>;
@@ -391,10 +412,11 @@
 
 		clocks = <&oscclk6a>;
 		clock-names = "apb_pclk";
-		port {
-			etb_in_port: endpoint {
-				slave-mode;
-				remote-endpoint = <&replicator_out_port0>;
+		in-ports {
+			port {
+				etb_in_port: endpoint {
+					remote-endpoint = <&replicator_out_port0>;
+				};
 			};
 		};
 	};
@@ -405,10 +427,11 @@
 
 		clocks = <&oscclk6a>;
 		clock-names = "apb_pclk";
-		port {
-			tpiu_in_port: endpoint {
-				slave-mode;
-				remote-endpoint = <&replicator_out_port1>;
+		in-ports {
+			port {
+				tpiu_in_port: endpoint {
+					remote-endpoint = <&replicator_out_port1>;
+				};
 			};
 		};
 	};
@@ -417,13 +440,12 @@
 		/* non-configurable replicators don't show up on the
 		 * AMBA bus.  As such no need to add "arm,primecell".
 		 */
-		compatible = "arm,coresight-replicator";
+		compatible = "arm,coresight-static-replicator";
 
-		ports {
+		out-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			/* replicator output ports */
 			port@0 {
 				reg = <0>;
 				replicator_out_port0: endpoint {
@@ -437,12 +459,11 @@
 					remote-endpoint = <&tpiu_in_port>;
 				};
 			};
+		};
 
-			/* replicator input port */
-			port@2 {
-				reg = <0>;
+		in-ports {
+			port {
 				replicator_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&funnel_out_port0>;
 				};
 			};
@@ -450,45 +471,41 @@
 	};
 
 	funnel@20040000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 		reg = <0 0x20040000 0 0x1000>;
 
 		clocks = <&oscclk6a>;
 		clock-names = "apb_pclk";
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel output port */
-			port@0 {
-				reg = <0>;
+		out-ports {
+			port {
 				funnel_out_port0: endpoint {
 					remote-endpoint =
 						<&replicator_in_port0>;
 				};
 			};
+		};
 
-			/* funnel input ports */
-			port@1 {
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
 				funnel_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm0_out_port>;
 				};
 			};
 
-			port@2 {
+			port@1 {
 				reg = <1>;
 				funnel_in_port1: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm1_out_port>;
 				};
 			};
 
-			port@3 {
+			port@2 {
 				reg = <2>;
 				funnel_in_port2: endpoint {
-					slave-mode;
 					remote-endpoint = <&etm0_out_port>;
 				};
 			};
@@ -498,7 +515,6 @@
 			port@4 {
 				reg = <4>;
 				funnel_in_port4: endpoint {
-					slave-mode;
 					remote-endpoint = <&etm1_out_port>;
 				};
 			};
@@ -506,7 +522,6 @@
 			port@5 {
 				reg = <5>;
 				funnel_in_port5: endpoint {
-					slave-mode;
 					remote-endpoint = <&etm2_out_port>;
 				};
 			};
@@ -520,9 +535,11 @@
 		cpu = <&cpu0>;
 		clocks = <&oscclk6a>;
 		clock-names = "apb_pclk";
-		port {
-			ptm0_out_port: endpoint {
-				remote-endpoint = <&funnel_in_port0>;
+		out-ports {
+			port {
+				ptm0_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port0>;
+				};
 			};
 		};
 	};
@@ -534,9 +551,11 @@
 		cpu = <&cpu1>;
 		clocks = <&oscclk6a>;
 		clock-names = "apb_pclk";
-		port {
-			ptm1_out_port: endpoint {
-				remote-endpoint = <&funnel_in_port1>;
+		out-ports {
+			port {
+				ptm1_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port1>;
+				};
 			};
 		};
 	};
@@ -548,9 +567,11 @@
 		cpu = <&cpu2>;
 		clocks = <&oscclk6a>;
 		clock-names = "apb_pclk";
-		port {
-			etm0_out_port: endpoint {
-				remote-endpoint = <&funnel_in_port2>;
+		out-ports {
+			port {
+				etm0_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port2>;
+				};
 			};
 		};
 	};
@@ -562,9 +583,11 @@
 		cpu = <&cpu3>;
 		clocks = <&oscclk6a>;
 		clock-names = "apb_pclk";
-		port {
-			etm1_out_port: endpoint {
-				remote-endpoint = <&funnel_in_port4>;
+		out-ports {
+			port {
+				etm1_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port4>;
+				};
 			};
 		};
 	};
@@ -576,72 +599,17 @@
 		cpu = <&cpu4>;
 		clocks = <&oscclk6a>;
 		clock-names = "apb_pclk";
-		port {
-			etm2_out_port: endpoint {
-				remote-endpoint = <&funnel_in_port5>;
+		out-ports {
+			port {
+				etm2_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port5>;
+				};
 			};
 		};
 	};
 
-	smb@8000000 {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x08000000 0x04000000>,
-			 <1 0 0 0x14000000 0x04000000>,
-			 <2 0 0 0x18000000 0x04000000>,
-			 <3 0 0 0x1c000000 0x04000000>,
-			 <4 0 0 0x0c000000 0x04000000>,
-			 <5 0 0 0x10000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
-
-		/include/ "vexpress-v2m-rs1.dtsi"
+	smb: bus@8000000 {
+		ranges = <0x8000000 0 0x8000000 0x18000000>;
 	};
 
 	site2: hsb@40000000 {
@@ -657,3 +625,12 @@
 				<0 3 &gic 0 39 4>;
 	};
 };
+
+&nor_flash {
+	/*
+	 * Unfortunately, accessing the flash disturbs the CPU idle states
+	 * (suspend) and CPU hotplug of this platform. For this reason, flash
+	 * hardware access is disabled by default on this platform alone.
+	 */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts
new file mode 100644
index 000000000000..e3896253f33e
--- /dev/null
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A5x2
+ * Cortex-A5 MPCore (V2P-CA5s)
+ *
+ * HBI-0225B
+ */
+
+/dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
+
+/ {
+	model = "V2P-CA5s";
+	arm,hbi = <0x225>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Chipselect 2 is physically at 0x18000000 */
+		vram: vram@18000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0x18000000 0x00800000>;
+			no-map;
+		};
+	};
+
+	hdlcd@2a110000 {
+		compatible = "arm,hdlcd";
+		reg = <0x2a110000 0x1000>;
+		interrupts = <0 85 4>;
+		clocks = <&hdlcd_clk>;
+		clock-names = "pxlclk";
+	};
+
+	memory-controller@2a150000 {
+		compatible = "arm,pl341", "arm,primecell";
+		reg = <0x2a150000 0x1000>;
+		clocks = <&axi_clk>;
+		clock-names = "apb_pclk";
+	};
+
+	memory-controller@2a190000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0x2a190000 0x1000>;
+		interrupts = <0 86 4>,
+			     <0 87 4>;
+		clocks = <&axi_clk>;
+		clock-names = "apb_pclk";
+	};
+
+	scu@2c000000 {
+		compatible = "arm,cortex-a5-scu";
+		reg = <0x2c000000 0x58>;
+	};
+
+	timer@2c000600 {
+		compatible = "arm,cortex-a5-twd-timer";
+		reg = <0x2c000600 0x20>;
+		interrupts = <1 13 0x304>;
+	};
+
+	timer@2c000200 {
+		compatible = "arm,cortex-a5-global-timer",
+		             "arm,cortex-a9-global-timer";
+		reg = <0x2c000200 0x20>;
+		interrupts = <1 11 0x304>;
+		clocks = <&cpu_clk>;
+	};
+
+	watchdog@2c000620 {
+		compatible = "arm,cortex-a5-twd-wdt";
+		reg = <0x2c000620 0x20>;
+		interrupts = <1 14 0x304>;
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,cortex-a5-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x2c001000 0x1000>,
+		      <0x2c000100 0x100>;
+	};
+
+	L2: cache-controller@2c0f0000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x2c0f0000 0x1000>;
+		interrupts = <0 84 4>;
+		cache-level = <2>;
+		cache-unified;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <0 68 4>,
+			     <0 69 4>;
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		cpu_clk: clock-controller-0 {
+			/* CPU and internal AXI reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <50000000 100000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk0";
+		};
+
+		axi_clk: clock-controller-1 {
+			/* Multiplexed AXI master clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 1>;
+			freq-range = <5000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk1";
+		};
+
+		clock-controller-2 {
+			/* DDR2 */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 2>;
+			freq-range = <80000000 120000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk2";
+		};
+
+		hdlcd_clk: clock-controller-3 {
+			/* HDLCD */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 3>;
+			freq-range = <23750000 165000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk3";
+		};
+
+		clock-controller-4 {
+			/* Test chip gate configuration */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <80000000 80000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk4";
+		};
+
+		smbclk: clock-controller-5 {
+			/* SMB clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 5>;
+			freq-range = <25000000 60000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk5";
+		};
+
+		temp-dcc {
+			/* DCC internal operating temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "DCC";
+		};
+	};
+
+	smb: bus@8000000 {
+		ranges = <0 0x8000000 0x18000000>;
+	};
+
+	site2: hsb@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x40000000 0x40000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 3>;
+		interrupt-map = <0 0 &gic 0 36 4>,
+				<0 1 &gic 0 37 4>,
+				<0 2 &gic 0 38 4>,
+				<0 3 &gic 0 39 4>;
+	};
+};
diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts
new file mode 100644
index 000000000000..43a5a4ab6ff0
--- /dev/null
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A9x4
+ * Cortex-A9 MPCore (V2P-CA9)
+ *
+ * HBI-0191B
+ */
+
+/dts-v1/;
+#include "vexpress-v2m.dtsi"
+
+/ {
+	model = "V2P-CA9";
+	arm,hbi = <0x191>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		stdout-path = &v2m_serial0;
+	};
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		A9_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Chipselect 3 is physically at 0x4c000000 */
+		vram: vram@4c000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0x4c000000 0x00800000>;
+			no-map;
+		};
+	};
+
+	clcd@10020000 {
+		compatible = "arm,pl111", "arm,primecell";
+		reg = <0x10020000 0x1000>;
+		interrupt-names = "combined";
+		interrupts = <0 44 4>;
+		clocks = <&oscclk1>, <&oscclk2>;
+		clock-names = "clcdclk", "apb_pclk";
+		/* 1024x768 16bpp @65MHz */
+		max-memory-bandwidth = <95000000>;
+
+		port {
+			clcd_pads_ct: endpoint {
+				remote-endpoint = <&dvi_bridge_in_ct>;
+				arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+			};
+		};
+	};
+
+	memory-controller@100e0000 {
+		compatible = "arm,pl341", "arm,primecell";
+		reg = <0x100e0000 0x1000>;
+		clocks = <&oscclk2>;
+		clock-names = "apb_pclk";
+	};
+
+	memory-controller@100e1000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0x100e1000 0x1000>;
+		interrupts = <0 45 4>,
+			     <0 46 4>;
+		clocks = <&oscclk2>;
+		clock-names = "apb_pclk";
+	};
+
+	timer@100e4000 {
+		compatible = "arm,sp804", "arm,primecell";
+		reg = <0x100e4000 0x1000>;
+		interrupts = <0 48 4>,
+			     <0 49 4>;
+		clocks = <&oscclk2>, <&oscclk2>, <&oscclk2>;
+		clock-names = "timer0clk", "timer1clk", "apb_pclk";
+		status = "disabled";
+	};
+
+	watchdog@100e5000 {
+		compatible = "arm,sp805", "arm,primecell";
+		reg = <0x100e5000 0x1000>;
+		interrupts = <0 51 4>;
+		clocks = <&oscclk2>, <&oscclk2>;
+		clock-names = "wdog_clk", "apb_pclk";
+	};
+
+	scu@1e000000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x1e000000 0x58>;
+	};
+
+	timer@1e000600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x1e000600 0x20>;
+		interrupts = <1 13 0xf04>;
+	};
+
+	watchdog@1e000620 {
+		compatible = "arm,cortex-a9-twd-wdt";
+		reg = <0x1e000620 0x20>;
+		interrupts = <1 14 0xf04>;
+	};
+
+	gic: interrupt-controller@1e001000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x1e001000 0x1000>,
+		      <0x1e000100 0x100>;
+	};
+
+	L2: cache-controller@1e00a000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x1e00a000 0x1000>;
+		interrupts = <0 43 4>;
+		cache-unified;
+		cache-level = <2>;
+		arm,data-latency = <1 1 1>;
+		arm,tag-latency = <1 1 1>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 60 4>,
+			     <0 61 4>,
+			     <0 62 4>,
+			     <0 63 4>;
+		interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>;
+
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		oscclk0: clock-controller-0 {
+			/* ACLK clock to the AXI master port on the test chip */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <30000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "extsaxiclk";
+		};
+
+		oscclk1: clock-controller-1 {
+			/* Reference clock for the CLCD */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 1>;
+			freq-range = <10000000 80000000>;
+			#clock-cells = <0>;
+			clock-output-names = "clcdclk";
+		};
+
+		smbclk: oscclk2: clock-controller-2 {
+			/* Reference clock for the test chip internal PLLs */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 2>;
+			freq-range = <33000000 100000000>;
+			#clock-cells = <0>;
+			clock-output-names = "tcrefclk";
+		};
+
+		regulator-vd10 {
+			/* Test Chip internal logic voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "VD10";
+			regulator-always-on;
+			label = "VD10";
+		};
+
+		regulator-vd10-s2 {
+			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 1>;
+			regulator-name = "VD10_S2";
+			regulator-always-on;
+			label = "VD10_S2";
+		};
+
+		regulator-vd10-s3 {
+			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 2>;
+			regulator-name = "VD10_S3";
+			regulator-always-on;
+			label = "VD10_S3";
+		};
+
+		regulator-vcc1v8 {
+			/* DDR2 SDRAM and Test Chip DDR2 I/O supply */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 3>;
+			regulator-name = "VCC1V8";
+			regulator-always-on;
+			label = "VCC1V8";
+		};
+
+		regulator-ddr2vtt {
+			/* DDR2 SDRAM VTT termination voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 4>;
+			regulator-name = "DDR2VTT";
+			regulator-always-on;
+			label = "DDR2VTT";
+		};
+
+		regulator-vcc3v3 {
+			/* Local board supply for miscellaneous logic external to the Test Chip */
+			arm,vexpress-sysreg,func = <2 5>;
+			compatible = "arm,vexpress-volt";
+			regulator-name = "VCC3V3";
+			regulator-always-on;
+			label = "VCC3V3";
+		};
+
+		amp-vd10-s2 {
+			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 0>;
+			label = "VD10_S2";
+		};
+
+		amp-vd10-s3 {
+			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 1>;
+			label = "VD10_S3";
+		};
+
+		power-vd10-s2 {
+			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 0>;
+			label = "PVD10_S2";
+		};
+
+		power-vd10-s3 {
+			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 1>;
+			label = "PVD10_S3";
+		};
+	};
+
+	site2: hsb@e0000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xe0000000 0x20000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 3>;
+		interrupt-map = <0 0 &gic 0 36 4>,
+				<0 1 &gic 0 37 4>,
+				<0 2 &gic 0 38 4>,
+				<0 3 &gic 0 39 4>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
deleted file mode 100644
index c4eef7323367..000000000000
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * Device Tree file for Marvell Armada 370 evaluation board
- * (DB-88F6710-BP-DDR3)
- *
- *  Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the default
- * 0xd0000000). The 0xf1000000 is the default used by the recent,
- * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
- * boards were delivered with an older version of the bootloader that
- * left internal registers mapped at 0xd0000000. If you are in this
- * situation, you should either update your bootloader (preferred
- * solution) or the below Device Tree should be adjusted.
- */
-
-/dts-v1/;
-#include "armada-370.dtsi"
-
-/ {
-	model = "Marvell Armada 370 Evaluation Board";
-	compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1 GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				pinctrl-0 = <&ge0_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			i2c@11000 {
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-				clock-frequency = <100000>;
-				status = "okay";
-				audio_codec: audio-codec@4a {
-					#sound-dai-cells = <0>;
-					compatible = "cirrus,cs42l51";
-					reg = <0x4a>;
-				};
-			};
-
-			audio-controller@30000 {
-				pinctrl-0 = <&i2s_pins2>;
-				pinctrl-names = "default";
-				status = "okay";
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins1>;
-				pinctrl-names = "default";
-				/*
-				 * This device is disabled by default, because
-				 * using the SD card connector requires
-				 * changing the default CON40 connector
-				 * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a
-				 * different connector
-				 * "DB-88F6710_MPP_RGMII_SD_Jumper".
-				 */
-				status = "disabled";
-				/* No CD or WP GPIOs */
-				broken-cd;
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "U-Boot";
-						reg = <0 0x800000>;
-					};
-					partition@800000 {
-						label = "Linux";
-						reg = <0x800000 0x800000>;
-					};
-					partition@1000000 {
-						label = "Filesystem";
-						reg = <0x1000000 0x3f000000>;
-					};
-				};
-			};
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "Armada 370 DB Audio";
-		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,widgets =
-			"Headphone", "Out Jack",
-			"Line", "In Jack";
-		simple-audio-card,routing =
-			"Out Jack", "HPL",
-			"Out Jack", "HPR",
-			"AIN1L", "In Jack",
-			"AIN1L", "In Jack";
-		status = "okay";
-
-		simple-audio-card,dai-link@0 {
-			format = "i2s";
-			cpu {
-				sound-dai = <&audio_controller 0>;
-			};
-
-			codec {
-				sound-dai = <&audio_codec>;
-			};
-		};
-
-		simple-audio-card,dai-link@1 {
-			format = "i2s";
-			cpu {
-				sound-dai = <&audio_controller 1>;
-			};
-
-			codec {
-				sound-dai = <&spdif_out>;
-			};
-		};
-
-		simple-audio-card,dai-link@2 {
-			format = "i2s";
-			cpu {
-				sound-dai = <&audio_controller 1>;
-			};
-
-			codec {
-				sound-dai = <&spdif_in>;
-			};
-		};
-	};
-
-	spdif_out: spdif-out {
-		#sound-dai-cells = <0>;
-		compatible = "linux,spdif-dit";
-	};
-
-	spdif_in: spdif-in {
-		#sound-dai-cells = <0>;
-		compatible = "linux,spdif-dir";
-	};
-};
-
-&pciec {
-	status = "okay";
-	/*
-	 * The two PCIe units are accessible through
-	 * both standard PCIe slots and mini-PCIe
-	 * slots on the board.
-	 */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-
-	pcie@2,0 {
-		/* Port 1, Lane 0 */
-		status = "okay";
-	};
-};
-
-&mdio {
-	pinctrl-0 = <&mdio_pins>;
-	pinctrl-names = "default";
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-
-&spi0 {
-	pinctrl-0 = <&spi0_pins2>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "mx25l25635e", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <50000000>;
-	};
-};
-
diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
deleted file mode 100644
index db7f3aa38670..000000000000
--- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
+++ /dev/null
@@ -1,358 +0,0 @@
-/*
- * Device Tree file for D-Link DNS-327L
- *
- * Copyright (C) 2015, Andrew Andrianov <andrew@ncrmnt.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/* Remaining unsolved:
- * There's still some unknown device on i2c address 0x13
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
-	model = "D-Link DNS-327L";
-	compatible = "dlink,dns327l",
-		"marvell,armada370",
-		"marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MiB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
-			MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
-
-		internal-regs {
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "u-boot";
-					/* 1.0 MiB */
-					reg = <0x0000000 0x100000>;
-					read-only;
-				};
-
-				partition@100000 {
-					label = "u-boot-env";
-					/* 128 KiB */
-					reg = <0x100000 0x20000>;
-					read-only;
-				};
-
-				partition@120000 {
-					label = "uImage";
-					/* 7 MiB */
-					reg = <0x120000 0x700000>;
-				};
-
-				partition@820000 {
-					label = "ubifs";
-					/* ~ 84 MiB */
-					reg = <0x820000 0x54e0000>;
-				};
-
-				/* Hardcoded into stock bootloader */
-				partition@5d00000 {
-					label = "failsafe-uImage";
-					/* 5 MiB */
-					reg = <0x5d00000 0x500000>;
-				};
-
-				partition@6200000 {
-					label = "failsafe-fs";
-					/* 29 MiB */
-					reg = <0x6200000 0x1d00000>;
-				};
-
-				partition@7f00000 {
-					label = "bbt";
-					/* 1 MiB for BBT */
-					reg = <0x7f00000 0x100000>;
-				};
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <
-			&backup_button_pin
-			&power_button_pin
-			&reset_button_pin>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-		};
-
-		backup-button {
-			label = "Backup Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <
-			&sata_l_amber_pin
-			&sata_r_amber_pin
-			&backup_led_pin
-			/* Ensure these are managed by hardware */
-			&sata_l_white_pin
-			&sata_r_white_pin>;
-
-		pinctrl-names = "default";
-
-		sata-r-amber-pin {
-			label = "dns327l:amber:sata-r";
-			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-
-		sata-l-amber-pin {
-			label = "dns327l:amber:sata-l";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-
-		backup-led-pin {
-			label = "dns327l:white:usb";
-			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			pinctrl-0 = <&xhci_pwr_pin>;
-			pinctrl-names = "default";
-			regulator-name = "USB3.0 Port Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-boot-on;
-			regulator-always-on;
-			gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-		};
-
-		sata_r_power: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			pinctrl-0 = <&sata_r_pwr_pin>;
-			pinctrl-names = "default";
-			regulator-name = "SATA-R Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <2000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-		};
-
-		sata_l_power: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			pinctrl-0 = <&sata_l_pwr_pin>;
-			pinctrl-names = "default";
-			regulator-name = "SATA-L Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <4000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-
-	pcie@2,0 {
-		/* Port 1, Lane 0 */
-		status = "okay";
-	};
-};
-
-&pinctrl {
-	sata_l_white_pin: sata-l-white-pin {
-		marvell,pins = "mpp57";
-		marvell,function = "sata0";
-	};
-
-	sata_r_white_pin: sata-r-white-pin {
-		marvell,pins = "mpp55";
-		marvell,function = "sata1";
-	};
-
-	sata_r_amber_pin: sata-r-amber-pin {
-		marvell,pins = "mpp52";
-		marvell,function = "gpio";
-	};
-
-	sata_l_amber_pin: sata-l-amber-pin {
-		marvell,pins = "mpp53";
-		marvell,function = "gpio";
-	};
-
-	backup_led_pin: backup-led-pin {
-		marvell,pins = "mpp61";
-		marvell,function = "gpo";
-	};
-
-	xhci_pwr_pin: xhci-pwr-pin {
-		marvell,pins = "mpp13";
-		marvell,function = "gpio";
-	};
-
-	sata_r_pwr_pin: sata-r-pwr-pin {
-		marvell,pins = "mpp54";
-		marvell,function = "gpio";
-	};
-
-	sata_l_pwr_pin: sata-l-pwr-pin {
-		marvell,pins = "mpp56";
-		marvell,function = "gpio";
-	};
-
-	uart1_pins: uart1-pins {
-		marvell,pins = "mpp60", "mpp61";
-		marvell,function = "uart1";
-	};
-
-	power_button_pin: power-button-pin {
-		marvell,pins = "mpp65";
-		marvell,function = "gpio";
-	};
-
-	backup_button_pin: backup-button-pin {
-		marvell,pins = "mpp63";
-		marvell,function = "gpio";
-	};
-
-	reset_button_pin: reset-button-pin {
-		marvell,pins = "mpp64";
-		marvell,function = "gpio";
-	};
-};
-
-/* Serial console */
-&uart0 {
-	status = "okay";
-};
-
-/* Connected to Weltrend MCU */
-&uart1 {
-	pinctrl-0 = <&uart1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&mdio {
-	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-		reg = <0>;
-		marvell,reg-init = <0x0 0x16 0x0 0x0002>,
-				<0x0 0x19 0x0 0x0077>,
-				<0x0 0x18 0x0 0x5747>;
-	};
-};
-
-&eth1 {
-	phy = <&phy0>;
-	phy-mode = "rgmii-id";
-	status = "okay";
-};
-
-&i2c0 {
-	compatible = "marvell,mv64xxx-i2c";
-	clock-frequency = <100000>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
deleted file mode 100644
index 702f58c9642d..000000000000
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * Device Tree file for Globalscale Mirabox
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
-	model = "Globalscale Mirabox";
-	compatible = "globalscale,mirabox", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			timer@20300 {
-				clock-frequency = <600000000>;
-				status = "okay";
-			};
-
-			gpio_leds {
-				compatible = "gpio-leds";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwr_led_pin &stat_led_pins>;
-
-				green_pwr_led {
-					label = "mirabox:green:pwr";
-					gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
-					default-state = "keep";
-				};
-
-				blue_stat_led {
-					label = "mirabox:blue:stat";
-					gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-					default-state = "off";
-				};
-
-				green_stat_led {
-					label = "mirabox:green:stat";
-					gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-					default-state = "off";
-				};
-			};
-
-			ethernet@70000 {
-				pinctrl-0 = <&ge0_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			crypto@90000 {
-				status = "okay";
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins3>;
-				pinctrl-names = "default";
-				status = "okay";
-				/*
-				 * No CD or WP GPIOs: SDIO interface used for
-				 * Wifi/Bluetooth chip
-				 */
-				 broken-cd;
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-				pca9505: pca9505@25 {
-					compatible = "nxp,pca9505";
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <0x25>;
-				};
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partition@0 {
-					label = "U-Boot";
-					reg = <0 0x400000>;
-				};
-				partition@400000 {
-					label = "Linux";
-					reg = <0x400000 0x400000>;
-				};
-				partition@800000 {
-					label = "Filesystem";
-					reg = <0x800000 0x3f800000>;
-				};
-			};
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	/* Internal mini-PCIe connector */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-
-	/* Connected on the PCB to a USB 3.0 XHCI controller */
-	pcie@2,0 {
-		/* Port 1, Lane 0 */
-		status = "okay";
-	};
-};
-
-&mdio {
-	pinctrl-0 = <&mdio_pins>;
-	pinctrl-names = "default";
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&pinctrl {
-	pwr_led_pin: pwr-led-pin {
-		marvell,pins = "mpp63";
-		marvell,function = "gpio";
-	};
-
-	stat_led_pins: stat-led-pins {
-		marvell,pins = "mpp64", "mpp65";
-		marvell,function = "gpio";
-	};
-};
-
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
deleted file mode 100644
index b1a96e95e921..000000000000
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * Device Tree file for NETGEAR ReadyNAS 102
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
-	model = "NETGEAR ReadyNAS 102";
-	compatible = "netgear,readynas-102", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
-
-		internal-regs {
-
-			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
-			rtc@10300 {
-				status = "disabled";
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			/* eSATA interface */
-			sata@a0000 {
-				nr-ports = <1>;
-				status = "okay";
-			};
-
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				clock-frequency = <100000>;
-
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-
-				status = "okay";
-
-				isl12057: isl12057@68 {
-					compatible = "isil,isl12057";
-					reg = <0x68>;
-					wakeup-source;
-				};
-
-				g762: g762@3e {
-					compatible = "gmt,g762";
-					reg = <0x3e>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				/* Use Hardware BCH ECC */
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0x180000>;  /* 1.5MB */
-					read-only;
-				};
-
-				partition@180000 {
-					label = "u-boot-env";
-					reg = <0x180000 0x20000>;    /* 128KB */
-					read-only;
-				};
-
-				partition@200000 {
-					label = "uImage";
-					reg = <0x0200000 0x600000>;    /* 6MB */
-				};
-
-				partition@800000 {
-					label = "minirootfs";
-					reg = <0x0800000 0x400000>;    /* 4MB */
-				};
-
-				/* Last MB is for the BBT, i.e. not writable */
-				partition@c00000 {
-					label = "ubifs";
-					reg = <0x0c00000 0x7400000>; /* 116MB */
-				};
-			};
-		};
-	};
-
-	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <8192>;
-	       };
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&power_led_pin
-			     &sata1_led_pin
-			     &sata2_led_pin
-			     &backup_led_pin>;
-		pinctrl-names = "default";
-
-		blue-power-led {
-			label = "rn102:blue:pwr";
-			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		blue-sata1-led {
-			label = "rn102:blue:sata1";
-			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		blue-sata2-led {
-			label = "rn102:blue:sata2";
-			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		blue-backup-led {
-			label = "rn102:blue:backup";
-			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&power_button_pin
-			     &reset_button_pin
-			     &backup_button_pin>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-		};
-
-		backup-button {
-			label = "Backup Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&poweroff>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	/* Connected to Marvell 88SE9170 SATA controller */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-
-	/* Connected to FL1009 USB 3.0 controller */
-	pcie@2,0 {
-		/* Port 1, Lane 0 */
-		status = "okay";
-	};
-};
-
-&mdio {
-	pinctrl-0 = <&mdio_pins>;
-	pinctrl-names = "default";
-	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-		reg = <0>;
-	};
-};
-
-&pinctrl {
-	power_led_pin: power-led-pin {
-		marvell,pins = "mpp57";
-		marvell,function = "gpio";
-	};
-
-	sata1_led_pin: sata1-led-pin {
-		marvell,pins = "mpp15";
-		marvell,function = "gpio";
-	};
-
-	sata2_led_pin: sata2-led-pin {
-		marvell,pins = "mpp14";
-		marvell,function = "gpio";
-	};
-
-	backup_led_pin: backup-led-pin {
-		marvell,pins = "mpp56";
-		marvell,function = "gpio";
-	};
-
-	backup_button_pin: backup-button-pin {
-		marvell,pins = "mpp58";
-		marvell,function = "gpio";
-	};
-
-	power_button_pin: power-button-pin {
-		marvell,pins = "mpp62";
-		marvell,function = "gpio";
-	};
-
-	reset_button_pin: reset-button-pin {
-		marvell,pins = "mpp6";
-		marvell,function = "gpio";
-	};
-
-	poweroff: poweroff {
-		marvell,pins = "mpp8";
-		marvell,function = "gpio";
-	};
-};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
deleted file mode 100644
index d67e7aa42b54..000000000000
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- * Device Tree file for NETGEAR ReadyNAS 104
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
-	model = "NETGEAR ReadyNAS 104";
-	compatible = "netgear,readynas-104", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
-
-		internal-regs {
-
-			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
-			rtc@10300 {
-				status = "disabled";
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				pinctrl-0 = <&ge0_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				clock-frequency = <100000>;
-
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-
-				status = "okay";
-
-				isl12057: isl12057@68 {
-					compatible = "isil,isl12057";
-					reg = <0x68>;
-					wakeup-source;
-				};
-
-				g762: g762@3e {
-					compatible = "gmt,g762";
-					reg = <0x3e>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-
-				pca9554: pca9554@23 {
-					compatible = "nxp,pca9554";
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <0x23>;
-				};
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				/* Use Hardware BCH ECC */
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0x180000>;  /* 1.5MB */
-					read-only;
-				};
-
-				partition@180000 {
-					label = "u-boot-env";
-					reg = <0x180000 0x20000>;    /* 128KB */
-					read-only;
-				};
-
-				partition@200000 {
-					label = "uImage";
-					reg = <0x0200000 0x600000>;    /* 6MB */
-				};
-
-				partition@800000 {
-					label = "minirootfs";
-					reg = <0x0800000 0x400000>;    /* 4MB */
-				};
-
-				/* Last MB is for the BBT, i.e. not writable */
-				partition@c00000 {
-					label = "ubifs";
-					reg = <0x0c00000 0x7400000>; /* 116MB */
-				};
-			};
-		};
-	};
-
-	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <8192>;
-	       };
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&backup_led_pin &power_led_pin>;
-		pinctrl-names = "default";
-
-		blue-backup-led {
-			label = "rn104:blue:backup";
-			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		blue-power-led {
-			label = "rn104:blue:pwr";
-			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "keep";
-		};
-
-		blue-sata1-led {
-			label = "rn104:blue:sata1";
-			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		blue-sata2-led {
-			label = "rn104:blue:sata2";
-			gpios = <&pca9554 1 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		blue-sata3-led {
-			label = "rn104:blue:sata3";
-			gpios = <&pca9554 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		blue-sata4-led {
-			label = "rn104:blue:sata4";
-			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&backup_button_pin
-			     &power_button_pin
-			     &reset_button_pin>;
-		pinctrl-names = "default";
-
-		backup-button {
-			label = "Backup Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-		};
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&poweroff>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	/* Connected to FL1009 USB 3.0 controller */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-
-	/* Connected to Marvell 88SE9215 SATA controller */
-	pcie@2,0 {
-		/* Port 1, Lane 0 */
-		status = "okay";
-	};
-};
-
-&mdio {
-	pinctrl-0 = <&mdio_pins>;
-	pinctrl-names = "default";
-	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-		reg = <0>;
-	};
-
-	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-		reg = <1>;
-	};
-};
-
-&pinctrl {
-	poweroff: poweroff {
-		marvell,pins = "mpp60";
-		marvell,function = "gpio";
-	};
-
-	backup_button_pin: backup-button-pin {
-		marvell,pins = "mpp52";
-		marvell,function = "gpio";
-	};
-
-	power_button_pin: power-button-pin {
-		marvell,pins = "mpp62";
-		marvell,function = "gpio";
-	};
-
-	backup_led_pin: backup-led-pin {
-		marvell,pins = "mpp63";
-		marvell,function = "gpio";
-	};
-
-	power_led_pin: power-led-pin {
-		marvell,pins = "mpp64";
-		marvell,function = "gpio";
-	};
-
-	reset_button_pin: reset-button-pin {
-		marvell,pins = "mpp65";
-		marvell,function = "gpio";
-	};
-};
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
deleted file mode 100644
index 8b2fa9a49967..000000000000
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * Device Tree file for Marvell Armada 370 Reference Design board
- * (RD-88F6710-A1)
- *
- *  Copied from arch/arm/boot/dts/armada-370-db.dts
- *
- *  Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the default
- * 0xd0000000). The 0xf1000000 is the default used by the recent,
- * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
- * boards were delivered with an older version of the bootloader that
- * left internal registers mapped at 0xd0000000. If you are in this
- * situation, you should either update your bootloader (preferred
- * solution) or the below Device Tree should be adjusted.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
-	model = "Marvell Armada 370 Reference Design";
-	compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "sgmii";
-			};
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy-mode = "rgmii-id";
-				fixed-link {
-					   speed = <1000>;
-					   full-duplex;
-				};
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins1>;
-				pinctrl-names = "default";
-				status = "okay";
-				/* No CD or WP GPIOs */
-				broken-cd;
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-
-			gpio-keys {
-				compatible = "gpio-keys";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				button {
-					label = "Software Button";
-					linux,code = <KEY_POWER>;
-					gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-				};
-			};
-
-			gpio-fan {
-				compatible = "gpio-fan";
-				gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-				gpio-fan,speed-map = <0 0 3000 1>;
-				pinctrl-0 = <&fan_pins>;
-				pinctrl-names = "default";
-			};
-
-			gpio_leds {
-				compatible = "gpio-leds";
-				pinctrl-names = "default";
-				pinctrl-0 = <&led_pins>;
-
-				sw_led {
-					label = "370rd:green:sw";
-					gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-					default-state = "keep";
-				};
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partition@0 {
-					label = "U-Boot";
-					reg = <0 0x800000>;
-				};
-				partition@800000 {
-					label = "Linux";
-					reg = <0x800000 0x800000>;
-				};
-				partition@1000000 {
-					label = "Filesystem";
-					reg = <0x1000000 0x3f000000>;
-				};
-			};
-		};
-	};
-
-	dsa {
-		status = "disabled";
-
-		compatible = "marvell,dsa";
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		dsa,ethernet = <&eth1>;
-		dsa,mii-bus = <&mdio>;
-
-		switch@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x10 0>;	/* MDIO address 16, switch 0 in tree */
-
-			port@0 {
-				reg = <0>;
-				label = "lan0";
-			};
-
-			port@1 {
-			       reg = <1>;
-			       label = "lan1";
-			};
-
-			port@2 {
-			       reg = <2>;
-			       label = "lan2";
-			};
-
-			port@3 {
-			       reg = <3>;
-			       label = "lan3";
-			};
-
-			port@5 {
-			      reg = <5>;
-			      label = "cpu";
-			};
-		};
-	 };
-};
-
-&pciec {
-	status = "okay";
-
-	/* Internal mini-PCIe connector */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-
-	/* Internal mini-PCIe connector */
-	pcie@2,0 {
-		/* Port 1, Lane 0 */
-		status = "okay";
-	};
-};
-
-&mdio {
-	pinctrl-0 = <&mdio_pins>;
-	pinctrl-names = "default";
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	switch: switch@10 {
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan0";
-			};
-
-			port@1 {
-			       reg = <1>;
-			       label = "lan1";
-			};
-
-			port@2 {
-			       reg = <2>;
-			       label = "lan2";
-			};
-
-			port@3 {
-			       reg = <3>;
-			       label = "lan3";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-				ethernet = <&eth1>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
-
-
-&pinctrl {
-	fan_pins: fan-pins {
-		marvell,pins = "mpp8";
-		marvell,function = "gpio";
-	};
-
-	led_pins: led-pins {
-		marvell,pins = "mpp32";
-		marvell,function = "gpio";
-	};
-};
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts
deleted file mode 100644
index fef0110a8d8a..000000000000
--- a/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Device Tree file for Seagate NAS 2-Bay (Armada 370 SoC).
- *
- * Copyright (C) 2015 Seagate
- *
- * Author: Vincent Donnefort <vdonnefort@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/*
- * Here are some information allowing to identify the device:
- *
- * Product name                 : Seagate NAS 2-Bay
- * Code name (board/PCB)        : Dart 2-Bay
- * Model name (case sticker)    : SRPD20
- * Material desc (product spec) : STCTxxxxxxx
- */
-
-/dts-v1/;
-#include "armada-370-seagate-nas-xbay.dtsi"
-
-/ {
-	model = "Seagate NAS 2-Bay (Dart, SRPD20)";
-	compatible = "seagate,dart-2", "marvell,armada370", "marvell,armada-370-xp";
-
-	gpio-fan {
-		gpio-fan,speed-map =
-			<   0 3
-			  950 2
-			 1400 1
-			 1800 0>;
-	};
-};
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
deleted file mode 100644
index eb6af53b4954..000000000000
--- a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * Device Tree file for Seagate NAS 4-Bay (Armada 370 SoC).
- *
- * Copyright (C) 2015 Seagate
- *
- * Author: Vincent Donnefort <vdonnefort@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/*
- * Here are some information allowing to identify the device:
- *
- * Product name                 : Seagate NAS 4-Bay
- * Code name (board/PCB)        : Dart 4-Bay
- * Model name (case sticker)    : SRPD40
- * Material desc (product spec) : STCUxxxxxxx
- */
-
-/dts-v1/;
-#include "armada-370-seagate-nas-xbay.dtsi"
-#include <dt-bindings/leds/leds-ns2.h>
-
-/ {
-	model = "Seagate NAS 4-Bay (Dart, SRPD40)";
-	compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp";
-
-	soc {
-		internal-regs {
-			ethernet@74000 {
-				status = "okay";
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			i2c@11000 {
-				/* I2C GPIO expander (PCA9554A) */
-				pca9554: pca9554@21 {
-					compatible = "nxp,pca9554";
-					reg = <0x21>;
-					#gpio-cells = <2>;
-					gpio-controller;
-				};
-			};
-		};
-	};
-
-	regulators {
-		regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "SATA2 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&pca9554 6 GPIO_ACTIVE_HIGH>;
-		};
-		regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "SATA3 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&pca9554 7 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		red-sata2 {
-			label = "dart:red:sata2";
-			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
-		};
-		red-sata3 {
-			label = "dart:red:sata3";
-			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds-ns2 {
-		compatible = "lacie,ns2-leds";
-
-		white-sata2 {
-			label = "dart:white:sata2";
-			cmd-gpio = <&pca9554 1 GPIO_ACTIVE_HIGH>;
-			slow-gpio = <&pca9554 2 GPIO_ACTIVE_HIGH>;
-			num-modes = <4>;
-			modes-map = <NS_V2_LED_SATA 0 0
-				     NS_V2_LED_OFF  0 1
-				     NS_V2_LED_ON   1 0
-				     NS_V2_LED_ON   1 1>;
-		};
-		white-sata3 {
-			label = "dart:white:sata3";
-			cmd-gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
-			slow-gpio = <&pca9554 5 GPIO_ACTIVE_HIGH>;
-			num-modes = <4>;
-			modes-map = <NS_V2_LED_SATA 0 0
-				     NS_V2_LED_OFF  0 1
-				     NS_V2_LED_ON   1 0
-				     NS_V2_LED_ON   1 1>;
-		};
-	};
-
-	gpio-fan {
-		gpio-fan,speed-map =
-			<   0 3
-			  800 2
-			  1050 1
-			  1300 0>;
-	};
-};
-
-&pciec {
-	/* SATA AHCI controller 88SE9170 */
-	pcie@1,0 {
-		status = "okay";
-	};
-};
-
-&mdio {
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
deleted file mode 100644
index e9a5b952afc0..000000000000
--- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * Device Tree common file for the Seagate NAS 2 and 4-bay (Armada 370 SoC).
- *
- * Copyright (C) 2015 Seagate
- *
- * Author: Vincent Donnefort <vdonnefort@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/*
- * TODO: add support for the white SATA LEDs associated with HDD 0 and 1.
- */
-
-#include "armada-370.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				pinctrl-0 = <&ge0_rgmii_pins>;
-				pinctrl-names = "default";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			i2c@11000 {
-				status = "okay";
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-				clock-frequency = <100000>;
-
-				/* RTC - NXP 8563T (second source) */
-				rtc@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-					interrupts = <110>;
-				};
-				/* RTC - MCP7940NT */
-				rtc@6f {
-					compatible = "microchip,mcp7941x";
-					reg = <0x6f>;
-					interrupts = <110>;
-				};
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0 0x300000>;
-				};
-				partition@300000 {
-					label = "device-tree";
-					reg = <0x300000 0x20000>;
-				};
-				partition@320000 {
-					label = "linux";
-					reg = <0x320000 0x2000000>;
-				};
-				partition@2320000 {
-					label = "rootfs";
-					reg = <0x2320000 0xdce0000>;
-				};
-			};
-		};
-
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA0 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
-		};
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "SATA1 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-fan {
-		compatible = "gpio-fan";
-		gpios = <&gpio2 0 GPIO_ACTIVE_HIGH
-			 &gpio2 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		power {
-			label = "Power button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-			debounce-interval = <100>;
-		};
-		backup {
-			label = "Backup button";
-			linux,code = <KEY_OPTION>;
-			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
-			debounce-interval = <100>;
-		};
-		reset {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-			debounce-interval = <100>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		white-power {
-			label = "dart:white:power";
-			gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "timer";
-
-		};
-		red-power {
-			label = "dart:red:power";
-			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
-		};
-		red-sata0 {
-			label = "dart:red:sata0";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-		red-sata1 {
-			label = "dart:red:sata1";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	/* USB 3.0 bridge ASM1042A */
-	pcie@2,0 {
-		status = "okay";
-	};
-};
-
-
-&mdio {
-	pinctrl-0 = <&mdio_pins>;
-	pinctrl-names = "default";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&pinctrl {
-	pinctrl-0 = <&hdd0_led_sata_pin>, <&hdd1_led_sata_pin>;
-	pinctrl-names = "default";
-
-	hdd0_led_sata_pin: hdd0-led-sata-pin {
-		marvell,pins = "mpp48";
-		marvell,function = "sata1";
-	};
-	hdd0_led_gpio_pin: hdd0-led-gpio-pin {
-		marvell,pins = "mpp48";
-		marvell,function = "gpio";
-	};
-	hdd1_led_sata_pin: hdd1-led-sata-pin {
-		marvell,pins = "mpp57";
-		marvell,function = "sata0";
-	};
-	hdd1_led_gpio_pin: hdd1-led-gpio-pin {
-		marvell,pins = "mpp57";
-		marvell,function = "gpio";
-	};
-};
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
deleted file mode 100644
index 3c91f9821c89..000000000000
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Device Tree file for Seagate Personal Cloud NAS 2-Bay (Armada 370 SoC).
- *
- * Copyright (C) 2015 Seagate
- *
- * Author: Simon Guinot <simon.guinot@sequanux.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/*
- * Here are some information allowing to identify the device:
- *
- * Product name                 : Seagate Personal Cloud 2-Bay
- * Code name (board/PCB)        : Cumulus Max
- * Model name (case sticker)    : SRN22C
- * Material desc (product spec) : STCSxxxxxxx
- */
-
-/dts-v1/;
-#include "armada-370-seagate-personal-cloud.dtsi"
-
-/ {
-	model = "Seagate Personal Cloud 2-Bay (Cumulus, SRN22C)";
-	compatible = "seagate,cumulus-max", "marvell,armada370", "marvell,armada-370-xp";
-
-	soc {
-		internal-regs {
-			sata@a0000 {
-				status = "okay";
-				nr-ports = <2>;
-			};
-		};
-	};
-
-	regulators {
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "SATA1 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
deleted file mode 100644
index d079a89ee5a2..000000000000
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Device Tree common file for the Seagate Personal Cloud NAS 1 and 2-Bay
- * (Armada 370 SoC).
- *
- * Copyright (C) 2015 Seagate
- *
- * Author: Simon Guinot <simon.guinot@sequanux.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/*
- * TODO: add support for the white SATA LED.
- */
-
-#include "armada-370.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			coherency-fabric@20200 {
-				broken-idle;
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			ethernet@74000 {
-				status = "okay";
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
-		};
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA0 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		power {
-			label = "Power button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
-			debounce-interval = <100>;
-		};
-		reset {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-			debounce-interval = <100>;
-		};
-		button {
-			label = "USB VBUS error";
-			linux,code = <KEY_UNKNOWN>;
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-			debounce-interval = <100>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		red-sata0 {
-			label = "cumulus:red:sata0";
-			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	/* USB 3.0 Bridge ASM1042A */
-	pcie@1,0 {
-		status = "okay";
-	};
-};
-
-&mdio {
-	pinctrl-0 = <&mdio_pins>;
-	pinctrl-names = "default";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&pinctrl {
-	pinctrl-0 = <&sata_led_pin>;
-	pinctrl-names = "default";
-
-	sata_led_pin: sata-led-pin {
-		marvell,pins = "mpp60";
-		marvell,function = "sata0";
-	};
-	gpio_led_pin: gpio-led-pin {
-		marvell,pins = "mpp60";
-		marvell,function = "gpio";
-	};
-};
-
-&spi0 {
-	status = "okay";
-	pinctrl-0 = <&spi0_pins2>;
-	pinctrl-names = "default";
-
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		/* MX25L8006E */
-		compatible = "mxicy,mx25l8005", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <50000000>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0x100000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
deleted file mode 100644
index 4978011df5bd..000000000000
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
- * Device Tree file for Synology DS213j
- *
- * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the old 0xd0000000).
- * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
- * bootloaders provided by Marvell. It is used in recent versions of
- * DSM software provided by Synology. Nonetheless, some earlier boards
- * were delivered with an older version of u-boot that left internal
- * registers mapped at 0xd0000000. If you have such a device you will
- * not be able to directly boot a kernel based on this Device Tree. In
- * that case, the preferred solution is to update your bootloader (e.g.
- * by upgrading to latest version of DSM, or building a new one and
- * installing it from u-boot prompt) or adjust the Devive Tree
- * (s/0xf1000000/0xd0000000/ in 'ranges' below).
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
-	model = "Synology DS213j";
-	compatible = "synology,ds213j", "marvell,armada370",
-		     "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
-
-		internal-regs {
-
-			/* RTC provided by Seiko S-35390A I2C RTC chip below */
-			rtc@10300 {
-				status = "disabled";
-			};
-
-			i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-				clock-frequency = <400000>;
-				status = "okay";
-
-				/* Main device RTC chip */
-				s35390a: s35390a@30 {
-					 compatible = "sii,s35390a";
-					 reg = <0x30>;
-				};
-			};
-
-			/* Connected to a header on device's PCB */
-			serial@12000 {
-				status = "okay";
-			};
-
-			/* Connected to a TI MSP430F2111 for power control */
-			serial@12100 {
-				status = "okay";
-			};
-
-			poweroff@12100 {
-				compatible = "synology,power-off";
-				reg = <0x12100 0x100>;
-				clocks = <&coreclk 0>;
-			};
-
-			/* rear USB port, near reset button */
-			usb@50000 {
-				status = "okay";
-			};
-
-			/* rear USB port, near RJ45 port */
-			usb@51000 {
-				status = "okay";
-			};
-
-			ethernet@70000 {
-			       status = "okay";
-			       phy = <&phy1>;
-			       phy-mode = "sgmii";
-			};
-
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-		};
-	};
-
-	gpio-fan-32-38 {
-		status = "okay";
-		compatible = "gpio-fan";
-		pinctrl-0 = <&fan_ctrl_low_pin &fan_ctrl_mid_pin
-			     &fan_ctrl_high_pin &fan_alarm_pin>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 31 GPIO_ACTIVE_HIGH
-			 &gpio2  0 GPIO_ACTIVE_HIGH
-			 &gpio2  1 GPIO_ACTIVE_HIGH>;
-		alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       1000 1
-				       1150 2
-				       1350 4
-				       1500 3
-				       1650 5
-				       1750 6
-				       1900 7 >;
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&disk1_led_pin
-			     &disk2_led_pin>;
-		pinctrl-names = "default";
-
-		disk1-led-amber {
-			label = "synology:amber:disk1";
-			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		disk2-led-amber {
-			label = "synology:amber:disk2";
-			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>;
-		pinctrl-names = "default";
-
-		sata1_regulator: sata1-regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <2000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		sata2_regulator: sata2-regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "SATA2 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <4000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&mdio {
-	phy1: ethernet-phy@1 { /* Marvell 88E1512 */
-		reg = <1>;
-	};
-};
-
-&pinctrl {
-	disk1_led_pin: disk1-led-pin {
-		marvell,pins = "mpp31";
-		marvell,function = "gpio";
-	};
-
-	disk2_led_pin: disk2-led-pin {
-		marvell,pins = "mpp32";
-		marvell,function = "gpio";
-	};
-
-	sata1_pwr_pin: sata1-pwr-pin {
-		marvell,pins = "mpp37";
-		marvell,function = "gpio";
-	};
-
-	sata2_pwr_pin: sata2-pwr-pin {
-		marvell,pins = "mpp62";
-		marvell,function = "gpio";
-	};
-
-	sata1_pres_pin: sata1-pres-pin {
-		marvell,pins = "mpp60";
-		marvell,function = "gpio";
-	};
-
-	sata2_pres_pin: sata2-pres-pin {
-		marvell,pins = "mpp48";
-		marvell,function = "gpio";
-	};
-
-	syno_id_bit0_pin: syno-id-bit0-pin {
-		marvell,pins = "mpp55";
-		marvell,function = "gpio";
-	};
-
-	syno_id_bit1_pin: syno-id-bit1-pin {
-		marvell,pins = "mpp56";
-		marvell,function = "gpio";
-	};
-
-	syno_id_bit2_pin: syno-id-bit2-pin {
-		marvell,pins = "mpp57";
-		marvell,function = "gpio";
-	};
-
-	syno_id_bit3_pin: syno-id-bit3-pin {
-		marvell,pins = "mpp58";
-		marvell,function = "gpio";
-	};
-
-	fan_ctrl_low_pin: fan-ctrl-low-pin {
-		marvell,pins = "mpp65";
-		marvell,function = "gpio";
-	};
-
-	fan_ctrl_mid_pin: fan-ctrl-mid-pin {
-		marvell,pins = "mpp64";
-		marvell,function = "gpio";
-	};
-
-	fan_ctrl_high_pin: fan-ctrl-high-pin {
-		marvell,pins = "mpp63";
-		marvell,function = "gpio";
-	};
-
-	fan_alarm_pin: fan-alarm-pin {
-		marvell,pins = "mpp38";
-		marvell,function = "gpio";
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q064", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <20000000>;
-
-		/*
-		 * Warning!
-		 *
-		 * Synology u-boot uses its compiled-in environment
-		 * and it seems Synology did not care to change u-boot
-		 * default configuration in order to allow saving a
-		 * modified environment at a sensible location. So,
-		 * if you do a 'saveenv' under u-boot, your modified
-		 * environment will be saved at 1MB after the start
-		 * of the flash, i.e. in the middle of the uImage.
-		 * For that reason, it is strongly advised not to
-		 * change the default environment, unless you know
-		 * what you are doing.
-		 */
-		partition@00000000 { /* u-boot */
-			label = "RedBoot";
-			reg = <0x00000000 0x000c0000>; /* 768KB */
-		};
-
-		partition@000c0000 { /* uImage */
-			label = "zImage";
-			reg = <0x000c0000 0x002d0000>; /* 2880KB */
-		};
-
-		partition@00390000 { /* uInitramfs */
-			label = "rd.gz";
-			reg = <0x00390000 0x00440000>; /* 4250KB */
-		};
-
-		partition@007d0000 { /* MAC address and serial number */
-			label = "vendor";
-			reg = <0x007d0000 0x00010000>; /* 64KB */
-		};
-
-		partition@007e0000 {
-			label = "RedBoot config";
-			reg = <0x007e0000 0x00010000>; /* 64KB */
-		};
-
-		partition@007f0000 {
-			label = "FIS directory";
-			reg = <0x007f0000 0x00010000>; /* 64KB */
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
deleted file mode 100644
index bcdbb8ba1d65..000000000000
--- a/arch/arm/boot/dts/armada-375-db.dts
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Device Tree file for Marvell Armada 375 evaluation board
- * (DB-88F6720)
- *
- *  Copyright (C) 2014 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-375.dtsi"
-
-/ {
-	model = "Marvell Armada 375 Development Board";
-	compatible = "marvell,a375-db", "marvell,armada375";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1 GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
-
-	};
-};
-&pciec {
-	status = "okay";
-};
-
-/*
- * The two PCIe units are accessible through
- * standard PCIe slots on the board.
- */
-&pcie0 {
-	/* Port 0, Lane 0 */
-	status = "okay";
-};
-
-&pcie1 {
-	/* Port 1, Lane 0 */
-	status = "okay";
-};
-
-
-&spi0 {
-	pinctrl-0 = <&spi0_pins>;
-	pinctrl-names = "default";
-
-	/*
-	 * SPI conflicts with NAND, so we disable it here, and
-	 * select NAND as the enabled device by default.
-	 */
-
-	status = "disabled";
-
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "n25q128a13", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <108000000>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <100000>;
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <100000>;
-	pinctrl-0 = <&i2c1_pins>;
-	pinctrl-names = "default";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&pinctrl {
-	sdio_st_pins: sdio-st-pins {
-		marvell,pins = "mpp44", "mpp45";
-		marvell,function = "gpio";
-	};
-};
-
-&sata {
-	status = "okay";
-	nr-ports = <2>;
-};
-
-&nand {
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	num-cs = <1>;
-	marvell,nand-keep-config;
-	marvell,nand-enable-arbiter;
-	nand-on-flash-bbt;
-	nand-ecc-strength = <4>;
-	nand-ecc-step-size = <512>;
-
-	partition@0 {
-		label = "U-Boot";
-		reg = <0 0x800000>;
-	};
-	partition@800000 {
-		label = "Linux";
-		reg = <0x800000 0x800000>;
-	};
-	partition@1000000 {
-		label = "Filesystem";
-		reg = <0x1000000 0x3f000000>;
-	};
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&usb2 {
-	status = "okay";
-};
-
-&sdio {
-	pinctrl-0 = <&sdio_pins &sdio_st_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-};
-
-&mdio {
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	phy3: ethernet-phy@3 {
-		reg = <3>;
-	};
-};
-
-&ethernet {
-	status = "okay";
-};
-
-
-&eth0 {
-	status = "okay";
-	phy = <&phy0>;
-	phy-mode = "rgmii-id";
-};
-
-&eth1 {
-	status = "okay";
-	phy = <&phy3>;
-	phy-mode = "gmii";
-};
diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
deleted file mode 100644
index e392f6036f39..000000000000
--- a/arch/arm/boot/dts/armada-380.dtsi
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 380 SoC.
- *
- * Copyright (C) 2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "armada-38x.dtsi"
-
-/ {
-	model = "Marvell Armada 380 family SoC";
-	compatible = "marvell,armada380";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-380-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-	};
-
-	soc {
-		internal-regs {
-			pinctrl@18000 {
-				compatible = "marvell,mv88f6810-pinctrl";
-			};
-		};
-
-		pcie-controller {
-			compatible = "marvell,armada-370-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */>;
-
-			/* x1 port */
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
deleted file mode 100644
index db5b9f6b615d..000000000000
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * Device Tree file for Marvell Armada 385 Access Point Development board
- * (DB-88F6820-AP)
- *
- *  Copyright (C) 2014 Marvell
- *
- * Nadav Haklai <nadavh@marvell.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "armada-385.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Marvell Armada 385 Access Point Development Board";
-	compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada380";
-
-	chosen {
-		stdout-path = "serial1:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000>; /* 2GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-
-		internal-regs {
-			i2c0: i2c@11000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins>;
-				status = "okay";
-
-				/*
-				 * This bus is wired to two EEPROM
-				 * sockets, one of which holding the
-				 * board ID used by the	bootloader.
-				 * Erasing this EEPROM's content will
-				 * brick the board.
-				 * Use this bus with caution.
-				 */
-			};
-
-			mdio@72004 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&mdio_pins>;
-
-				phy0: ethernet-phy@1 {
-					reg = <1>;
-				};
-
-				phy1: ethernet-phy@4 {
-					reg = <4>;
-				};
-
-				phy2: ethernet-phy@6 {
-					reg = <6>;
-				};
-			};
-
-			/* UART0 is exposed through the JP8 connector */
-			uart0: serial@12000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&uart0_pins>;
-				status = "okay";
-			};
-
-			/*
-			 * UART1 is exposed through a FTDI chip
-			 * wired to the mini-USB connector
-			 */
-			uart1: serial@12100 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&uart1_pins>;
-				status = "okay";
-			};
-
-			pinctrl@18000 {
-				xhci0_vbus_pins: xhci0-vbus-pins {
-					marvell,pins = "mpp44";
-					marvell,function = "gpio";
-				};
-			};
-
-			/* CON3 */
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy2>;
-				phy-mode = "sgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <1>;
-				bm,pool-short = <3>;
-			};
-
-			/* CON2 */
-			ethernet@34000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "sgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <2>;
-				bm,pool-short = <3>;
-			};
-
-			usb@58000 {
-				status = "okay";
-			};
-
-			/* CON4 */
-			ethernet@70000 {
-				pinctrl-names = "default";
-
-				/*
-				 * The Reference Clock 0 is used to
-				 * provide a clock to the PHY
-				 */
-				pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-				buffer-manager = <&bm>;
-				bm,pool-long = <0>;
-				bm,pool-short = <3>;
-			};
-
-			bm@c8000 {
-				status = "okay";
-			};
-
-			nfc: flash@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "U-Boot";
-						reg = <0x00000000 0x00800000>;
-						read-only;
-					};
-
-					partition@800000 {
-						label = "uImage";
-						reg = <0x00800000 0x00400000>;
-						read-only;
-					};
-
-					partition@c00000 {
-						label = "Root";
-						reg = <0x00c00000 0x3f400000>;
-					};
-				};
-			};
-
-			usb3@f0000 {
-				status = "okay";
-				usb-phy = <&usb3_phy>;
-			};
-		};
-
-		bm-bppi {
-			status = "okay";
-		};
-
-		pcie-controller {
-			status = "okay";
-
-			/*
-			 * The three PCIe units are accessible through
-			 * standard mini-PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-
-			pcie@3,0 {
-				/* Port 2, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-
-	usb3_phy: usb3_phy {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&reg_xhci0_vbus>;
-	};
-
-	reg_xhci0_vbus: xhci0-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&xhci0_vbus_pins>;
-		regulator-name = "xhci0-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins>;
-	status = "okay";
-
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p128", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <54000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
deleted file mode 100644
index ee669ae61011..000000000000
--- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Device Tree include for the Linksys WRT1200AC (Caiman)
- *
- * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
- *
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "armada-385-linksys.dtsi"
-
-/ {
-	model = "Linksys WRT1200AC";
-	compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385",
-		     "marvell,armada380";
-};
-
-&expander0 {
-	wan_amber@0 {
-		label = "caiman:amber:wan";
-		reg = <0x0>;
-	};
-
-	wan_white@1 {
-		label = "caiman:white:wan";
-		reg = <0x1>;
-	};
-
-	wlan_2g@2 {
-		label = "caiman:white:wlan_2g";
-		reg = <0x2>;
-	};
-
-	wlan_5g@3 {
-		label = "caiman:white:wlan_5g";
-		reg = <0x3>;
-	};
-
-	usb2@5 {
-		label = "caiman:white:usb2";
-		reg = <0x5>;
-	};
-
-	usb3_1@6 {
-		label = "caiman:white:usb3_1";
-		reg = <0x6>;
-	};
-
-	usb3_2@7 {
-		label = "caiman:white:usb3_2";
-		reg = <0x7>;
-	};
-
-	wps_white@8 {
-		label = "caiman:white:wps";
-		reg = <0x8>;
-	};
-
-	wps_amber@9 {
-		label = "caiman:amber:wps";
-		reg = <0x9>;
-	};
-};
-
-&gpio_leds {
-	power {
-		label = "caiman:white:power";
-	};
-
-	sata {
-		label = "caiman:white:sata";
-	};
-};
-
-&nand {
-	/* 128MiB */
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x200000>;  /* 2MiB */
-		read-only;
-	};
-
-	partition@100000 {
-		label = "u_env";
-		reg = <0x200000 0x40000>;    /* 256KiB */
-	};
-
-	partition@140000 {
-		label = "s_env";
-		reg = <0x240000 0x40000>;    /* 256KiB */
-	};
-
-	partition@900000 {
-		label = "devinfo";
-		reg = <0x900000 0x100000>;   /* 1MiB */
-		read-only;
-	};
-
-	/* kernel1 overlaps with rootfs1 by design */
-	partition@a00000 {
-		label = "kernel1";
-		reg = <0xa00000 0x2800000>;  /* 40MiB */
-	};
-
-	partition@1000000 {
-		label = "rootfs1";
-		reg = <0x1000000 0x2200000>;  /* 34MiB */
-	};
-
-	/* kernel2 overlaps with rootfs2 by design */
-	partition@3200000 {
-		label = "kernel2";
-		reg = <0x3200000 0x2800000>; /* 40MiB */
-	};
-
-	partition@3800000 {
-		label = "rootfs2";
-		reg = <0x3800000 0x2200000>; /* 34MiB */
-	};
-
-	/*
-	 * 38MiB, last MiB is for the BBT, not writable
-	 */
-	partition@5a00000 {
-		label = "syscfg";
-		reg = <0x5a00000 0x2600000>;
-	};
-
-	/*
-	 * Unused area between "s_env" and "devinfo".
-	 * Moved here because otherwise the renumbered
-	 * partitions would break the bootloader
-	 * supplied bootargs
-	 */
-	partition@180000 {
-		label = "unused_area";
-		reg = <0x280000 0x680000>;   /* 6.5MiB */
-	};
-};
diff --git a/arch/arm/boot/dts/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
deleted file mode 100644
index 5169ca89c55a..000000000000
--- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Device Tree file for the Linksys WRT1900ACv2 (Cobra)
- *
- * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
- *
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "armada-385-linksys.dtsi"
-
-/ {
-	model = "Linksys WRT1900ACv2";
-	compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385",
-		     "marvell,armada380";
-};
-
-&expander0 {
-	wan_amber@0 {
-		label = "cobra:amber:wan";
-		reg = <0x0>;
-	};
-
-	wan_white@1 {
-		label = "cobra:white:wan";
-		reg = <0x1>;
-	};
-
-	wlan_2g@2 {
-		label = "cobra:white:wlan_2g";
-		reg = <0x2>;
-	};
-
-	wlan_5g@3 {
-		label = "cobra:white:wlan_5g";
-		reg = <0x3>;
-	};
-
-	usb2@5 {
-		label = "cobra:white:usb2";
-		reg = <0x5>;
-	};
-
-	usb3_1@6 {
-		label = "cobra:white:usb3_1";
-		reg = <0x6>;
-	};
-
-	usb3_2@7 {
-		label = "cobra:white:usb3_2";
-		reg = <0x7>;
-	};
-
-	wps_white@8 {
-		label = "cobra:white:wps";
-		reg = <0x8>;
-	};
-
-	wps_amber@9 {
-		label = "cobra:amber:wps";
-		reg = <0x9>;
-	};
-};
-
-&gpio_leds {
-	power {
-		label = "cobra:white:power";
-	};
-
-	sata {
-		label = "cobra:white:sata";
-	};
-};
-
-&nand {
-	/* 128MiB */
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x200000>;  /* 2MiB */
-		read-only;
-	};
-
-	partition@100000 {
-		label = "u_env";
-		reg = <0x200000 0x40000>;    /* 256KiB */
-	};
-
-	partition@140000 {
-		label = "s_env";
-		reg = <0x240000 0x40000>;    /* 256KiB */
-	};
-
-	partition@900000 {
-		label = "devinfo";
-		reg = <0x900000 0x100000>;   /* 1MiB */
-		read-only;
-	};
-
-	/* kernel1 overlaps with rootfs1 by design */
-	partition@a00000 {
-		label = "kernel1";
-		reg = <0xa00000 0x2800000>;  /* 40MiB */
-	};
-
-	partition@1000000 {
-		label = "rootfs1";
-		reg = <0x1000000 0x2200000>;  /* 34MiB */
-	};
-
-	/* kernel2 overlaps with rootfs2 by design */
-	partition@3200000 {
-		label = "kernel2";
-		reg = <0x3200000 0x2800000>; /* 40MiB */
-	};
-
-	partition@3800000 {
-		label = "rootfs2";
-		reg = <0x3800000 0x2200000>; /* 34MiB */
-	};
-
-	/*
-	 * 38MiB, last MiB is for the BBT, not writable
-	 */
-	partition@5a00000 {
-		label = "syscfg";
-		reg = <0x5a00000 0x2600000>;
-	};
-
-	/*
-	 * Unused area between "s_env" and "devinfo".
-	 * Moved here because otherwise the renumbered
-	 * partitions would break the bootloader
-	 * supplied bootargs
-	 */
-	partition@180000 {
-		label = "unused_area";
-		reg = <0x280000 0x680000>;   /* 6.5MiB */
-	};
-};
diff --git a/arch/arm/boot/dts/armada-385-linksys-rango.dts b/arch/arm/boot/dts/armada-385-linksys-rango.dts
deleted file mode 100644
index da8a0f3d432b..000000000000
--- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * Device Tree file for the Linksys WRT3200ACM (Rango)
- *
- * Copyright (C) 2016 Imre Kaloz <kaloz@openwrt.org>
- *
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-385-linksys.dtsi"
-
-/ {
-	model = "Linksys WRT3200ACM";
-	compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
-		     "marvell,armada380";
-};
-
-&expander0 {
-	wan_amber@0 {
-		label = "rango:amber:wan";
-		reg = <0x0>;
-	};
-
-	wan_white@1 {
-		label = "rango:white:wan";
-		reg = <0x1>;
-	};
-
-	usb2@5 {
-		label = "rango:white:usb2";
-		reg = <0x5>;
-	};
-
-	usb3_1@6 {
-		label = "rango:white:usb3_1";
-		reg = <0x6>;
-	};
-
-	usb3_2@7 {
-		label = "rango:white:usb3_2";
-		reg = <0x7>;
-	};
-
-	wps_white@8 {
-		label = "rango:white:wps";
-		reg = <0x8>;
-	};
-
-	wps_amber@9 {
-		label = "rango:amber:wps";
-		reg = <0x9>;
-	};
-};
-
-&gpio_leds {
-	power {
-		gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-		label = "rango:white:power";
-	};
-
-	sata {
-		gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-		label = "rango:white:sata";
-	};
-
-	wlan_2g {
-		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		label = "rango:white:wlan_2g";
-	};
-
-	wlan_5g {
-		gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		label = "rango:white:wlan_5g";
-	};
-};
-
-&gpio_leds_pins {
-	marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56";
-};
-
-&nand {
-	/* AMD/Spansion S34ML02G2 256MiB, OEM Layout */
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x200000>;  /* 2MiB */
-		read-only;
-	};
-
-	partition@200000 {
-		label = "u_env";
-		reg = <0x200000 0x20000>;    /* 128KiB */
-	};
-
-	partition@220000 {
-		label = "s_env";
-		reg = <0x220000 0x40000>;    /* 256KiB */
-	};
-
-	partition@7e0000 {
-		label = "devinfo";
-		reg = <0x7e0000 0x40000>;   /* 256KiB */
-		read-only;
-	};
-
-	partition@820000 {
-		label = "sysdiag";
-		reg = <0x820000 0x1e0000>;   /* 1920KiB */
-		read-only;
-	};
-
-	/* kernel1 overlaps with rootfs1 by design */
-	partition@a00000 {
-		label = "kernel1";
-		reg = <0xa00000 0x5000000>;  /* 80MiB */
-	};
-
-	partition@1000000 {
-		label = "rootfs1";
-		reg = <0x1000000 0x4a00000>;  /* 74MiB */
-	};
-
-	/* kernel2 overlaps with rootfs2 by design */
-	partition@5a00000 {
-		label = "kernel2";
-		reg = <0x5a00000 0x5000000>; /* 80MiB */
-	};
-
-	partition@6000000 {
-		label = "rootfs2";
-		reg = <0x6000000 0x4a00000>; /* 74MiB */
-	};
-
-	/*
-	 * 86MiB, last MiB is for the BBT, not writable
-	 */
-	partition@aa00000 {
-		label = "syscfg";
-		reg = <0xaa00000 0x5600000>;
-	};
-
-	/*
-	 * Unused area between "s_env" and "devinfo".
-	 * Moved here because otherwise the renumbered
-	 * partitions would break the bootloader
-	 * supplied bootargs
-	 */
-	partition@180000 {
-		label = "unused_area";
-		reg = <0x260000 0x5c0000>;   /* 5.75MiB */
-	};
-};
-
-&sdhci {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhci_pins>;
-	no-1-8-v;
-	non-removable;
-	wp-inverted;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&usb3_1_vbus {
-	gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3_1_vbus_pins {
-	marvell,pins = "mpp44";
-};
diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
deleted file mode 100644
index 94aa35bc0bff..000000000000
--- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Device Tree file for the Linksys WRT1900ACS (Shelby)
- *
- * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
- *
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "armada-385-linksys.dtsi"
-
-/ {
-	model = "Linksys WRT1900ACS";
-	compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
-		     "marvell,armada380";
-};
-
-&expander0 {
-	wan_amber@0 {
-		label = "shelby:amber:wan";
-		reg = <0x0>;
-	};
-
-	wan_white@1 {
-		label = "shelby:white:wan";
-		reg = <0x1>;
-	};
-
-	wlan_2g@2 {
-		label = "shelby:white:wlan_2g";
-		reg = <0x2>;
-	};
-
-	wlan_5g@3 {
-		label = "shelby:white:wlan_5g";
-		reg = <0x3>;
-	};
-
-	usb2@5 {
-		label = "shelby:white:usb2";
-		reg = <0x5>;
-	};
-
-	usb3_1@6 {
-		label = "shelby:white:usb3_1";
-		reg = <0x6>;
-	};
-
-	usb3_2@7 {
-		label = "shelby:white:usb3_2";
-		reg = <0x7>;
-	};
-
-	wps_white@8 {
-		label = "shelby:white:wps";
-		reg = <0x8>;
-	};
-
-	wps_amber@9 {
-		label = "shelby:amber:wps";
-		reg = <0x9>;
-	};
-};
-
-&gpio_leds {
-	power {
-		label = "shelby:white:power";
-	};
-
-	sata {
-		label = "shelby:white:sata";
-	};
-};
-
-&nand {
-	/* 128MiB */
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x200000>;  /* 2MiB */
-		read-only;
-	};
-
-	partition@100000 {
-		label = "u_env";
-		reg = <0x200000 0x40000>;    /* 256KiB */
-	};
-
-	partition@140000 {
-		label = "s_env";
-		reg = <0x240000 0x40000>;    /* 256KiB */
-	};
-
-	partition@900000 {
-		label = "devinfo";
-		reg = <0x900000 0x100000>;   /* 1MiB */
-		read-only;
-	};
-
-	/* kernel1 overlaps with rootfs1 by design */
-	partition@a00000 {
-		label = "kernel1";
-		reg = <0xa00000 0x2800000>;  /* 40MiB */
-	};
-
-	partition@1000000 {
-		label = "rootfs1";
-		reg = <0x1000000 0x2200000>;  /* 34MiB */
-	};
-
-	/* kernel2 overlaps with rootfs2 by design */
-	partition@3200000 {
-		label = "kernel2";
-		reg = <0x3200000 0x2800000>; /* 40MiB */
-	};
-
-	partition@3800000 {
-		label = "rootfs2";
-		reg = <0x3800000 0x2200000>; /* 34MiB */
-	};
-
-	/*
-	 * 38MiB, last MiB is for the BBT, not writable
-	 */
-	partition@5a00000 {
-		label = "syscfg";
-		reg = <0x5a00000 0x2600000>;
-	};
-
-	/*
-	 * Unused area between "s_env" and "devinfo".
-	 * Moved here because otherwise the renumbered
-	 * partitions would break the bootloader
-	 * supplied bootargs
-	 */
-	partition@180000 {
-		label = "unused_area";
-		reg = <0x280000 0x680000>;   /* 6.5MiB */
-	};
-};
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
deleted file mode 100644
index e1f355ffc8f7..000000000000
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * Device Tree include file for Armada 385 based Linksys boards
- *
- * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
- *
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-385.dtsi"
-
-/ {
-	model = "Linksys boards based on Armada 385";
-	compatible = "linksys,armada385", "marvell,armada385",
-		     "marvell,armada380";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MiB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-	};
-
-	usb3_1_phy: usb3_1-phy {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&usb3_1_vbus>;
-	};
-
-	usb3_1_vbus: usb3_1-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb3_1_vbus_pins>;
-		regulator-name = "usb3_1-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
-	};
-
-	gpio_keys: gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&gpio_keys_pins>;
-		pinctrl-names = "default";
-
-		wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-		};
-
-		reset {
-			label = "Factory Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_leds: gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&gpio_leds_pins>;
-		pinctrl-names = "default";
-
-		power {
-			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		sata {
-			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-			linux,default-trigger = "disk-activity";
-		};
-	};
-};
-
-&ahci0 {
-	status = "okay";
-};
-
-&bm {
-	status = "okay";
-};
-
-&bm_bppi {
-	status = "okay";
-};
-
-&eth0 {
-	status = "okay";
-	phy-mode = "rgmii-id";
-	buffer-manager = <&bm>;
-	bm,pool-long = <0>;
-	bm,pool-short = <1>;
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&eth2 {
-	status = "okay";
-	phy-mode = "sgmii";
-	buffer-manager = <&bm>;
-	bm,pool-long = <2>;
-	bm,pool-short = <3>;
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	status = "okay";
-
-	tmp421@4c {
-		compatible = "ti,tmp421";
-		reg = <0x4c>;
-	};
-
-	expander0: pca9635@68 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "nxp,pca9635";
-		reg = <0x68>;
-	};
-};
-
-&nand {
-	/* 128MiB or 256MiB */
-	status = "okay";
-	num-cs = <1>;
-	marvell,nand-keep-config;
-	marvell,nand-enable-arbiter;
-	nand-on-flash-bbt;
-};
-
-&mdio {
-	status = "okay";
-
-	switch@0 {
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan4";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan3";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan2";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan1";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "wan";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-				ethernet = <&eth2>;
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-};
-
-&pcie1 {
-	/* Marvell 88W8864, 5GHz-only */
-	status = "okay";
-};
-
-&pcie2 {
-	/* Marvell 88W8864, 2GHz-only */
-	status = "okay";
-};
-
-&pinctrl {
-	gpio_keys_pins: gpio-keys-pins {
-		/* mpp24: wps, mpp29: reset */
-		marvell,pins = "mpp24", "mpp29";
-		marvell,function = "gpio";
-	};
-
-	gpio_leds_pins: gpio-leds-pins {
-		/* mpp54: sata, mpp55: power */
-		marvell,pins = "mpp54", "mpp55";
-		marvell,function = "gpio";
-	};
-
-	usb3_1_vbus_pins: usb3_1-vbus-pins {
-		marvell,pins = "mpp50";
-		marvell,function = "gpio";
-	};
-};
-
-&spi0 {
-	status = "disabled";
-};
-
-&uart0 {
-	/* J10: VCC, NC, RX, NC, TX, GND  */
-	status = "okay";
-};
-
-&usb0 {
-	/* USB part of the eSATA/USB 2.0 port */
-	status = "okay";
-};
-
-&usb3_1 {
-	status = "okay";
-	usb-phy = <&usb3_1_phy>;
-};
diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts
deleted file mode 100644
index be16ce39fb3d..000000000000
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ /dev/null
@@ -1,392 +0,0 @@
-/*
- * Device Tree file for the Turris Omnia
- *
- * Copyright (C) 2016 Uwe Kleine-König <uwe@kleine-koenig.org>
- * Copyright (C) 2016 Tomas Hlavacek <tmshlvkc@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/*
- * Schematic available at https://www.turris.cz/doc/_media/rtrom01-schema.pdf
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-385.dtsi"
-
-/ {
-	model = "Turris Omnia";
-	compatible = "cznic,turris-omnia", "marvell,armada385", "marvell,armada380";
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1024 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
-
-		internal-regs {
-
-			/* USB part of the PCIe2/USB 2.0 port */
-			usb@58000 {
-				status = "okay";
-			};
-
-			sata@a8000 {
-				status = "okay";
-			};
-
-			sdhci@d8000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&sdhci_pins>;
-				status = "okay";
-
-				bus-width = <8>;
-				no-1-8-v;
-				non-removable;
-			};
-
-			usb3@f0000 {
-				status = "okay";
-			};
-
-			usb3@f8000 {
-				status = "okay";
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-
-			pcie@3,0 {
-				/* Port 2, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-};
-
-/* Connected to 88E6176 switch, port 6 */
-&eth0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ge0_rgmii_pins>;
-	status = "okay";
-	phy-mode = "rgmii";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-/* Connected to 88E6176 switch, port 5 */
-&eth1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ge1_rgmii_pins>;
-	status = "okay";
-	phy-mode = "rgmii";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-/* WAN port */
-&eth2 {
-	status = "okay";
-	phy-mode = "sgmii";
-	phy = <&phy1>;
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	status = "okay";
-
-	i2cmux@70 {
-		compatible = "nxp,pca9547";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		status = "okay";
-
-		i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			/* STM32F0 command interface at address 0x2a */
-			/* leds device (in STM32F0) at address 0x2b */
-
-			eeprom@54 {
-				compatible = "atmel,24c64";
-				reg = <0x54>;
-
-				/* The EEPROM contains data for bootloader.
-				 * Contents:
-				 * 	struct omnia_eeprom {
-				 * 		u32 magic; (=0x0341a034 in LE)
-				 *		u32 ramsize; (in GiB)
-				 * 		char regdomain[4];
-				 * 		u32 crc32;
-				 * 	};
-				 */
-			};
-		};
-
-		i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			/* routed to PCIe0/mSATA connector (CN7A) */
-		};
-
-		i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			/* routed to PCIe1/USB2 connector (CN61A) */
-		};
-
-		i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			/* routed to PCIe2 connector (CN62A) */
-		};
-
-		i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-
-			/* routed to SFP+ */
-		};
-
-		i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-
-			/* ATSHA204A at address 0x64 */
-		};
-
-		i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-
-			/* exposed on pin header */
-		};
-
-		i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-
-			pcawan: gpio@71 {
-				/*
-				 * GPIO expander for SFP+ signals and
-				 * and phy irq
-				 */
-				compatible = "nxp,pca9538";
-				reg = <0x71>;
-
-				pinctrl-names = "default";
-				pinctrl-0 = <&pcawan_pins>;
-
-				interrupt-parent = <&gpio1>;
-				interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-		};
-	};
-};
-
-&mdio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-	status = "okay";
-
-	phy1: phy@1 {
-		status = "okay";
-		compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-
-		/* irq is connected to &pcawan pin 7 */
-	};
-
-	/* Switch MV88E6176 at address 0x10 */
-	switch@10 {
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		dsa,member = <0 0>;
-
-		reg = <0x10>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ports@0 {
-				reg = <0>;
-				label = "lan0";
-			};
-
-			ports@1 {
-				reg = <1>;
-				label = "lan1";
-			};
-
-			ports@2 {
-				reg = <2>;
-				label = "lan2";
-			};
-
-			ports@3 {
-				reg = <3>;
-				label = "lan3";
-			};
-
-			ports@4 {
-				reg = <4>;
-				label = "lan4";
-			};
-
-			ports@5 {
-				reg = <5>;
-				label = "cpu";
-				ethernet = <&eth1>;
-				phy-mode = "rgmii-id";
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			/* port 6 is connected to eth0 */
-		};
-	};
-};
-
-&pinctrl {
-	pcawan_pins: pcawan-pins {
-		marvell,pins = "mpp46";
-		marvell,function = "gpio";
-	};
-
-	spi0cs0_pins: spi0cs0-pins {
-		marvell,pins = "mpp25";
-		marvell,function = "spi0";
-	};
-
-	spi0cs1_pins: spi0cs1-pins {
-		marvell,pins = "mpp26";
-		marvell,function = "spi0";
-	};
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins &spi0cs0_pins>;
-	status = "okay";
-
-	spi-nor@0 {
-		compatible = "spansion,s25fl164k", "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		spi-max-frequency = <40000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				reg = <0x0 0x00100000>;
-				label = "U-Boot";
-			};
-
-			partition@100000 {
-				reg = <0x00100000 0x00700000>;
-				label = "Rescue system";
-			};
-		};
-	};
-
-	/* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */
-};
-
-&uart0 {
-	/* Pin header CN10 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&uart1 {
-	/* Pin header CN11 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
deleted file mode 100644
index 7fcc4c4885cf..000000000000
--- a/arch/arm/boot/dts/armada-385.dtsi
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 385 SoC.
- *
- * Copyright (C) 2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "armada-38x.dtsi"
-
-/ {
-	model = "Marvell Armada 385 family SoC";
-	compatible = "marvell,armada385", "marvell,armada380";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-380-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	soc {
-		pciec: pcie-controller {
-			compatible = "marvell,armada-370-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */
-				0x82000000 0x4 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
-				0x81000000 0x4 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO  */>;
-
-			/*
-			 * This port can be either x4 or x1. When
-			 * configured in x4 by the bootloader, then
-			 * pcie@4,0 is not available.
-			 */
-			pcie1: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie2: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie3: pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			/*
-			 * x1 port only available when pcie@1,0 is
-			 * configured as a x1 port
-			 */
-			pcie4: pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <3>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-		};
-	};
-};
-
-&pinctrl {
-	compatible = "marvell,mv88f6820-pinctrl";
-};
diff --git a/arch/arm/boot/dts/armada-388-clearfog-base.dts b/arch/arm/boot/dts/armada-388-clearfog-base.dts
deleted file mode 100644
index 22ed07fc2979..000000000000
--- a/arch/arm/boot/dts/armada-388-clearfog-base.dts
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Device Tree file for SolidRun Clearfog Base revision A1 rev 2.0 (88F6828)
- *
- *  Copyright (C) 2015 Russell King
- *
- * This board is in development; the contents of this file work with
- * the A1 rev 2.0 of the board, which does not represent final
- * production board.  Things will change, don't expect this file to
- * remain compatible info the future.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "armada-388-clearfog.dtsi"
-
-/ {
-	model = "SolidRun Clearfog Base A1";
-	compatible = "solidrun,clearfog-base-a1",
-		"solidrun,clearfog-a1", "marvell,armada388",
-		"marvell,armada385", "marvell,armada380";
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&rear_button_pins>;
-		pinctrl-names = "default";
-
-		button_0 {
-			/* The rear SW3 button */
-			label = "Rear Button";
-			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-			linux,can-disable;
-			linux,code = <BTN_0>;
-		};
-	};
-};
-
-&eth1 {
-	phy = <&phy1>;
-};
-
-&gpio0 {
-	phy1_reset {
-		gpio-hog;
-		gpios = <19 GPIO_ACTIVE_LOW>;
-		output-low;
-		line-name = "phy1-reset";
-	};
-};
-
-&mdio {
-	pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins &clearfog_phy_pins>;
-	phy1: ethernet-phy@1 {
-		/*
-		 * Annoyingly, the marvell phy driver configures the LED
-		 * register, rather than preserving reset-loaded setting.
-		 * We undo that rubbish here.
-		 */
-		marvell,reg-init = <3 16 0 0x101e>;
-		reg = <1>;
-	};
-};
-
-&pinctrl {
-	/* phy1 reset */
-	clearfog_phy_pins: clearfog-phy-pins {
-		marvell,pins = "mpp19";
-		marvell,function = "gpio";
-	};
-	rear_button_pins: rear-button-pins {
-		marvell,pins = "mpp44";
-		marvell,function = "gpio";
-	};
-};
diff --git a/arch/arm/boot/dts/armada-388-clearfog-pro.dts b/arch/arm/boot/dts/armada-388-clearfog-pro.dts
deleted file mode 100644
index bd85870bbdbb..000000000000
--- a/arch/arm/boot/dts/armada-388-clearfog-pro.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828)
- *
- *  Copyright (C) 2015 Russell King
- *
- * This board is in development; the contents of this file work with
- * the A1 rev 2.0 of the board, which does not represent final
- * production board.  Things will change, don't expect this file to
- * remain compatible info the future.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include "armada-388-clearfog.dts"
-
-/ {
-	model = "SolidRun Clearfog Pro A1";
-	compatible = "solidrun,clearfog-pro-a1",
-		"solidrun,clearfog-a1", "marvell,armada388",
-		"marvell,armada385", "marvell,armada380";
-};
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
deleted file mode 100644
index 0d5f1f062275..000000000000
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
- * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828)
- *
- *  Copyright (C) 2015 Russell King
- *
- * This board is in development; the contents of this file work with
- * the A1 rev 2.0 of the board, which does not represent final
- * production board.  Things will change, don't expect this file to
- * remain compatible info the future.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "armada-388-clearfog.dtsi"
-
-/ {
-	model = "SolidRun Clearfog A1";
-	compatible = "solidrun,clearfog-a1", "marvell,armada388",
-		"marvell,armada385", "marvell,armada380";
-
-	soc {
-		internal-regs {
-			usb3@f0000 {
-				/* CON2, nearest CPU, USB2 only. */
-				status = "okay";
-			};
-		};
-
-		pcie-controller {
-			pcie@3,0 {
-				/* Port 2, Lane 0. CON2, nearest CPU. */
-				reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
-				status = "okay";
-			};
-		};
-	};
-
-	dsa@0 {
-		status = "disabled";
-
-		compatible = "marvell,dsa";
-		dsa,ethernet = <&eth1>;
-		dsa,mii-bus = <&mdio>;
-		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
-		pinctrl-names = "default";
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		switch@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4 0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan5";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan4";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan3";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan2";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "lan1";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-			};
-
-			port@6 {
-				/* 88E1512 external phy */
-				reg = <6>;
-				label = "lan6";
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&rear_button_pins>;
-		pinctrl-names = "default";
-
-		button_0 {
-			/* The rear SW3 button */
-			label = "Rear Button";
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-			linux,can-disable;
-			linux,code = <BTN_0>;
-		};
-	};
-};
-
-&eth1 {
-	/* ethernet@30000 */
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&expander0 {
-	/*
-	 * PCA9655 GPIO expander:
-	 *  0-CON3 CLKREQ#
-	 *  1-CON3 PERST#
-	 *  2-CON2 PERST#
-	 *  3-CON3 W_DISABLE
-	 *  4-CON2 CLKREQ#
-	 *  5-USB3 overcurrent
-	 *  6-USB3 power
-	 *  7-CON2 W_DISABLE
-	 *  8-JP4 P1
-	 *  9-JP4 P4
-	 * 10-JP4 P5
-	 * 11-m.2 DEVSLP
-	 * 12-SFP_LOS
-	 * 13-SFP_TX_FAULT
-	 * 14-SFP_TX_DISABLE
-	 * 15-SFP_MOD_DEF0
-	 */
-	pcie2_0_clkreq {
-		gpio-hog;
-		gpios = <4 GPIO_ACTIVE_LOW>;
-		input;
-		line-name = "pcie2.0-clkreq";
-	};
-	pcie2_0_w_disable {
-		gpio-hog;
-		gpios = <7 GPIO_ACTIVE_LOW>;
-		output-low;
-		line-name = "pcie2.0-w-disable";
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	switch@4 {
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <4>;
-		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
-		pinctrl-names = "default";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan5";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan4";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan3";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan2";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "lan1";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-				ethernet = <&eth1>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			port@6 {
-				/* 88E1512 external phy */
-				reg = <6>;
-				label = "lan6";
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
-
-&pinctrl {
-	clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
-		marvell,pins = "mpp46";
-		marvell,function = "ref";
-	};
-	clearfog_dsa0_pins: clearfog-dsa0-pins {
-		marvell,pins = "mpp23", "mpp41";
-		marvell,function = "gpio";
-	};
-	clearfog_spi1_cs_pins: spi1-cs-pins {
-		marvell,pins = "mpp55";
-		marvell,function = "spi1";
-	};
-	rear_button_pins: rear-button-pins {
-		marvell,pins = "mpp34";
-		marvell,function = "gpio";
-	};
-};
-
-&spi1 {
-	/*
-	 * Add SPI CS pins for clearfog:
-	 * CS0: W25Q32 (not populated on uSOM)
-	 * CS1:
-	 * CS2: mikrobus
-	 */
-	pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>;
-};
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi
deleted file mode 100644
index 0f5938bede53..000000000000
--- a/arch/arm/boot/dts/armada-388-clearfog.dtsi
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- * Device Tree include file for SolidRun Clearfog 88F6828 based boards
- *
- *  Copyright (C) 2015 Russell King
- *
- * This board is in development; the contents of this file work with
- * the A1 rev 2.0 of the board, which does not represent final
- * production board.  Things will change, don't expect this file to
- * remain compatible info the future.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "armada-388.dtsi"
-#include "armada-38x-solidrun-microsom.dtsi"
-
-/ {
-	aliases {
-		/* So that mvebu u-boot can update the MAC addresses */
-		ethernet1 = &eth0;
-		ethernet2 = &eth1;
-		ethernet3 = &eth2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	soc {
-		internal-regs {
-			sata@a8000 {
-				/* pinctrl? */
-				status = "okay";
-			};
-
-			sata@e0000 {
-				/* pinctrl? */
-				status = "okay";
-			};
-
-			sdhci@d8000 {
-				bus-width = <4>;
-				cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
-				no-1-8-v;
-				pinctrl-0 = <&microsom_sdhci_pins
-					     &clearfog_sdhci_cd_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				vmmc = <&reg_3p3v>;
-				wp-inverted;
-			};
-
-			usb@58000 {
-				/* CON3, nearest  power. */
-				status = "okay";
-			};
-
-			usb3@f8000 {
-				/* CON7 */
-				status = "okay";
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-			/*
-			 * The two PCIe units are accessible through
-			 * the mini-PCIe connectors on the board.
-			 */
-			pcie@2,0 {
-				/* Port 1, Lane 0. CON3, nearest power. */
-				reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
-				status = "okay";
-			};
-		};
-	};
-};
-
-&eth1 {
-	/* ethernet@30000 */
-	bm,pool-long = <2>;
-	bm,pool-short = <1>;
-	buffer-manager = <&bm>;
-	phy-mode = "sgmii";
-	status = "okay";
-};
-
-&eth2 {
-	/* ethernet@34000 */
-	bm,pool-long = <3>;
-	bm,pool-short = <1>;
-	buffer-manager = <&bm>;
-	phy-mode = "sgmii";
-	status = "okay";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&i2c0 {
-	/* Is there anything on this? */
-	clock-frequency = <100000>;
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	/*
-	 * PCA9655 GPIO expander, up to 1MHz clock.
-	 *  0-CON3 CLKREQ#
-	 *  1-CON3 PERST#
-	 *  2-
-	 *  3-CON3 W_DISABLE
-	 *  4-
-	 *  5-USB3 overcurrent
-	 *  6-USB3 power
-	 *  7-
-	 *  8-JP4 P1
-	 *  9-JP4 P4
-	 * 10-JP4 P5
-	 * 11-m.2 DEVSLP
-	 * 12-SFP_LOS
-	 * 13-SFP_TX_FAULT
-	 * 14-SFP_TX_DISABLE
-	 * 15-SFP_MOD_DEF0
-	 */
-	expander0: gpio-expander@20 {
-		/*
-		 * This is how it should be:
-		 * compatible = "onnn,pca9655", "nxp,pca9555";
-		 * but you can't do this because of the way I2C works.
-		 */
-		compatible = "nxp,pca9555";
-		gpio-controller;
-		#gpio-cells = <2>;
-		reg = <0x20>;
-
-		pcie1_0_clkreq {
-			gpio-hog;
-			gpios = <0 GPIO_ACTIVE_LOW>;
-			input;
-			line-name = "pcie1.0-clkreq";
-		};
-		pcie1_0_w_disable {
-			gpio-hog;
-			gpios = <3 GPIO_ACTIVE_LOW>;
-			output-low;
-			line-name = "pcie1.0-w-disable";
-		};
-		usb3_ilimit {
-			gpio-hog;
-			gpios = <5 GPIO_ACTIVE_LOW>;
-			input;
-			line-name = "usb3-current-limit";
-		};
-		usb3_power {
-			gpio-hog;
-			gpios = <6 GPIO_ACTIVE_HIGH>;
-			output-high;
-			line-name = "usb3-power";
-		};
-		m2_devslp {
-			gpio-hog;
-			gpios = <11 GPIO_ACTIVE_HIGH>;
-			output-low;
-			line-name = "m.2 devslp";
-		};
-		sfp_los {
-			/* SFP loss of signal */
-			gpio-hog;
-			gpios = <12 GPIO_ACTIVE_HIGH>;
-			input;
-			line-name = "sfp-los";
-		};
-		sfp_tx_fault {
-			/* SFP laser fault */
-			gpio-hog;
-			gpios = <13 GPIO_ACTIVE_HIGH>;
-			input;
-			line-name = "sfp-tx-fault";
-		};
-		sfp_tx_disable {
-			/* SFP transmit disable */
-			gpio-hog;
-			gpios = <14 GPIO_ACTIVE_HIGH>;
-			output-low;
-			line-name = "sfp-tx-disable";
-		};
-		sfp_mod_def0 {
-			/* SFP module present */
-			gpio-hog;
-			gpios = <15 GPIO_ACTIVE_LOW>;
-			input;
-			line-name = "sfp-mod-def0";
-		};
-	};
-
-	/* The MCP3021 is 100kHz clock only */
-	mikrobus_adc: mcp3021@4c {
-		compatible = "microchip,mcp3021";
-		reg = <0x4c>;
-	};
-
-	/* Also something at 0x64 */
-};
-
-&i2c1 {
-	/*
-	 * Routed to SFP, mikrobus, and PCIe.
-	 * SFP limits this to 100kHz, and requires an AT24C01A/02/04 with
-	 *  address pins tied low, which takes addresses 0x50 and 0x51.
-	 * Mikrobus doesn't specify beyond an I2C bus being present.
-	 * PCIe uses ARP to assign addresses, or 0x63-0x64.
-	 */
-	clock-frequency = <100000>;
-	pinctrl-0 = <&clearfog_i2c1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&pinctrl {
-	clearfog_i2c1_pins: i2c1-pins {
-		/* SFP, PCIe, mSATA, mikrobus */
-		marvell,pins = "mpp26", "mpp27";
-		marvell,function = "i2c1";
-	};
-	clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins {
-		marvell,pins = "mpp20";
-		marvell,function = "gpio";
-	};
-	mikro_pins: mikro-pins {
-		/* int: mpp22 rst: mpp29 */
-		marvell,pins = "mpp22", "mpp29";
-		marvell,function = "gpio";
-	};
-	mikro_spi_pins: mikro-spi-pins {
-		marvell,pins = "mpp43";
-		marvell,function = "spi1";
-	};
-	mikro_uart_pins: mikro-uart-pins {
-		marvell,pins = "mpp24", "mpp25";
-		marvell,function = "ua1";
-	};
-};
-
-&spi1 {
-	/*
-	 * Add SPI CS pins for clearfog:
-	 * CS0: W25Q32 (not populated on uSOM)
-	 * CS1: PIC microcontroller (Pro models)
-	 * CS2: mikrobus
-	 */
-	pinctrl-0 = <&spi1_pins &mikro_spi_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&uart1 {
-	/* mikrobus uart */
-	pinctrl-0 = <&mikro_uart_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
deleted file mode 100644
index 1ac923826445..000000000000
--- a/arch/arm/boot/dts/armada-388-db.dts
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * Device Tree file for Marvell Armada 388 evaluation board
- * (DB-88F6820)
- *
- *  Copyright (C) 2014 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "armada-388.dtsi"
-
-/ {
-	model = "Marvell Armada 385 Development Board";
-	compatible = "marvell,a385-db", "marvell,armada388",
-		"marvell,armada385", "marvell,armada380";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>; /* 256 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-
-		internal-regs {
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-			};
-
-			i2c@11100 {
-				status = "okay";
-				clock-frequency = <100000>;
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-				buffer-manager = <&bm>;
-				bm,pool-long = <2>;
-				bm,pool-short = <3>;
-			};
-
-			usb@58000 {
-				status = "ok";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-				buffer-manager = <&bm>;
-				bm,pool-long = <0>;
-				bm,pool-short = <1>;
-			};
-
-			mdio@72004 {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
-			sata@a8000 {
-				status = "okay";
-			};
-
-			sata@e0000 {
-				status = "okay";
-			};
-
-			bm@c8000 {
-				status = "okay";
-			};
-
-			flash@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "U-Boot";
-					reg = <0 0x800000>;
-				};
-				partition@800000 {
-					label = "Linux";
-					reg = <0x800000 0x800000>;
-				};
-				partition@1000000 {
-					label = "Filesystem";
-					reg = <0x1000000 0x3f000000>;
-				};
-			};
-
-			sdhci@d8000 {
-				broken-cd;
-				wp-inverted;
-				bus-width = <8>;
-				status = "okay";
-				no-1-8-v;
-			};
-
-			usb3@f0000 {
-				status = "okay";
-			};
-
-			usb3@f8000 {
-				status = "okay";
-			};
-		};
-
-		bm-bppi {
-			status = "okay";
-		};
-
-		pcie-controller {
-			status = "okay";
-			/*
-			 * The two PCIe units are accessible through
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "w25q32", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <108000000>;
-	};
-};
-
diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts
deleted file mode 100644
index af82f275eac2..000000000000
--- a/arch/arm/boot/dts/armada-388-rd.dts
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * Device Tree file for Marvell Armada 388 Reference Design board
- * (RD-88F6820-AP)
- *
- *  Copyright (C) 2014 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "armada-388.dtsi"
-
-/ {
-	model = "Marvell Armada 385 Reference Design";
-	compatible = "marvell,a385-rd", "marvell,armada388",
-		"marvell,armada385","marvell,armada380";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>; /* 256 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
-
-		internal-regs {
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-			};
-
-			sdhci@d8000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&sdhci_pins>;
-				broken-cd;
-				no-1-8-v;
-				wp-inverted;
-				bus-width = <8>;
-				status = "okay";
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-
-			mdio@72004 {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
-			usb3@f0000 {
-				status = "okay";
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-			/*
-			 * One PCIe units is accessible through
-			 * standard PCIe slot on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p128", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <108000000>;
-	};
-};
-
diff --git a/arch/arm/boot/dts/armada-388.dtsi b/arch/arm/boot/dts/armada-388.dtsi
deleted file mode 100644
index 1c0d151b2aaa..000000000000
--- a/arch/arm/boot/dts/armada-388.dtsi
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 388 SoC.
- *
- * Copyright (C) 2015 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
- *
- * The main difference with the Armada 385 is that the 388 can handle two more
- * SATA ports. So we can reuse the dtsi of the Armada 385, override the pinctrl
- * property and the name of the SoC, and add the second SATA host which control
- * the 2 other ports.
- */
-
-#include "armada-385.dtsi"
-
-/ {
-	model = "Marvell Armada 388 family SoC";
-	compatible = "marvell,armada388", "marvell,armada385",
-		"marvell,armada380";
-	soc {
-		internal-regs {
-			sata@e0000 {
-				compatible = "marvell,armada-380-ahci";
-				reg = <0xe0000 0x2000>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 30>;
-				status = "disabled";
-			};
-
-		};
-	};
-};
-
-&pinctrl {
-	compatible = "marvell,mv88f6828-pinctrl";
-};
diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
deleted file mode 100644
index 9b508a8161f5..000000000000
--- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Device Tree file for SolidRun Armada 38x Microsom
- *
- *  Copyright (C) 2015 Russell King
- *
- * This board is in development; the contents of this file work with
- * the A1 rev 2.0 of the board, which does not represent final
- * production board.  Things will change, don't expect this file to
- * remain compatible info the future.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>; /* 256 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-
-		internal-regs {
-			rtc@a3800 {
-				/*
-				 * If the rtc doesn't work, run "date reset"
-				 * twice in u-boot.
-				 */
-				status = "okay";
-			};
-		};
-	};
-};
-
-&bm {
-	status = "okay";
-};
-
-&bm_bppi {
-	status = "okay";
-};
-
-&eth0 {
-	/* ethernet@70000 */
-	pinctrl-0 = <&ge0_rgmii_pins>;
-	pinctrl-names = "default";
-	phy = <&phy_dedicated>;
-	phy-mode = "rgmii-id";
-	buffer-manager = <&bm>;
-	bm,pool-long = <0>;
-	bm,pool-short = <1>;
-	status = "okay";
-};
-
-&mdio {
-	/*
-	 * Add the phy clock here, so the phy can be accessed to read its
-	 * IDs prior to binding with the driver.
-	 */
-	pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins>;
-	pinctrl-names = "default";
-
-	phy_dedicated: ethernet-phy@0 {
-		/*
-		 * Annoyingly, the marvell phy driver configures the LED
-		 * register, rather than preserving reset-loaded setting.
-		 * We undo that rubbish here.
-		 */
-		marvell,reg-init = <3 16 0 0x101e>;
-		reg = <0>;
-	};
-};
-
-&pinctrl {
-	microsom_phy_clk_pins: microsom-phy-clk-pins {
-		marvell,pins = "mpp45";
-		marvell,function = "ref";
-	};
-	/* Optional eMMC */
-	microsom_sdhci_pins: microsom-sdhci-pins {
-		marvell,pins = "mpp21", "mpp28", "mpp37",
-			       "mpp38", "mpp39", "mpp40";
-		marvell,function = "sd0";
-	};
-};
-
-&spi1 {
-	/* The microsom has an optional W25Q32 on board, connected to CS0 */
-	pinctrl-0 = <&spi1_pins>;
-
-	w25q32: spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "w25q32", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <3000000>;
-		status = "disabled";
-	};
-};
-
-&uart0 {
-	pinctrl-0 = <&uart0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts
deleted file mode 100644
index 2afed2ce4741..000000000000
--- a/arch/arm/boot/dts/armada-390-db.dts
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * Device Tree file for Marvell Armada 390 Development Board
- * (DB-88F6920)
- *
- * Copyright (C) 2016 Marvell
- *
- * Grzegorz Jaszczyk <jaz@semihalf.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "armada-390.dtsi"
-
-/ {
-	model = "Marvell Armada 390 Development Board";
-	compatible = "marvell,a390-db", "marvell,armada390";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000>; /* 2 GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-
-				eeprom@50 {
-					compatible = "atmel,24c64";
-					reg = <0x50>;
-				};
-			};
-
-			/* CON104 */
-			serial@12000 {
-				status = "okay";
-			};
-
-			/* CON97 */
-			usb@58000 {
-				status = "okay";
-			};
-
-			flash@d0000 {
-				status = "okay";
-				pinctrl-0 = <&nand_pins>;
-				pinctrl-names = "default";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-				nand-ecc-strength = <8>;
-				nand-ecc-step-size = <512>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "U-Boot";
-						reg = <0 0x800000>;
-					};
-					partition@800000 {
-						label = "Linux";
-						reg = <0x800000 0x800000>;
-					};
-					partition@1000000 {
-						label = "Filesystem";
-						reg = <0x1000000 0x3f000000>;
-					};
-				};
-			};
-
-			/* CON98 */
-			usb3@f8000 {
-				status = "okay";
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-
-			/* CON30 */
-			pcie@1,0 {
-				status = "okay";
-			};
-
-			/* CON44 */
-			pcie@2,0 {
-				status = "okay";
-			};
-
-			/* CON61 */
-			pcie@3,0 {
-				status = "okay";
-			};
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-0 = <&spi1_pins>;
-	pinctrl-names = "default";
-
-	spi-flash@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "n25q128a13",
-			     "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <108000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0 0x400000>;
-			};
-			partition@400000 {
-				label = "Filesystem";
-				reg = <0x400000 0xc00000>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-390.dtsi b/arch/arm/boot/dts/armada-390.dtsi
deleted file mode 100644
index 0d8a54ad007c..000000000000
--- a/arch/arm/boot/dts/armada-390.dtsi
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 390 SoC.
- *
- * Copyright (C) 2015 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "armada-39x.dtsi"
-
-/ {
-	compatible = "marvell,armada390";
-
-	soc {
-		internal-regs {
-			pinctrl@18000 {
-				compatible = "marvell,mv88f6920-pinctrl";
-				reg = <0x18000 0x20>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-395-gp.dts b/arch/arm/boot/dts/armada-395-gp.dts
deleted file mode 100644
index 2cdbba804c1e..000000000000
--- a/arch/arm/boot/dts/armada-395-gp.dts
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * Device Tree file for Marvell Armada 395 GP board
- *
- * Copyright (C) 2016 Marvell
- *
- * Grzegorz Jaszczyk <jaz@semihalf.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "armada-395.dtsi"
-
-/ {
-	model = "Marvell Armada 395 GP Board";
-	compatible = "marvell,a395-gp", "marvell,armada395",
-		     "marvell,armada390";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1 GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-
-				eeprom@57 {
-					compatible = "atmel,24c64";
-					reg = <0x57>;
-				};
-			};
-
-			serial@12000 {
-				/*
-				 * Exported on the micro USB connector CON17
-				 * through an FTDI
-				 */
-				status = "okay";
-			};
-
-			/* CON1 */
-			usb@58000 {
-				status = "okay";
-			};
-
-			/* CON2 */
-			sata@a8000 {
-				status = "okay";
-			};
-
-			flash@d0000 {
-				status = "okay";
-				pinctrl-0 = <&nand_pins>;
-				pinctrl-names = "default";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "U-Boot";
-						reg = <0x00000000 0x00600000>;
-						read-only;
-					};
-
-					partition@800000 {
-						label = "uImage";
-						reg = <0x00600000 0x00400000>;
-						read-only;
-					};
-
-					partition@1000000 {
-						label = "Root";
-						reg = <0x00a00000 0x3f600000>;
-					};
-				};
-			};
-
-			/* CON18 */
-			sdhci@d8000 {
-				clock-frequency = <200000000>;
-				broken-cd;
-				wp-inverted;
-				bus-width = <8>;
-				status = "okay";
-				no-1-8-v;
-			};
-
-			/* CON4 */
-			usb3@f0000 {
-				status = "okay";
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-
-			/*
-			 * The two PCIe units are accessible through
-			 * mini PCIe slot on the board.
-			 */
-
-			/* CON7 */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-
-			/* CON8 */
-			pcie@4,0 {
-				/* Port 3, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-395.dtsi b/arch/arm/boot/dts/armada-395.dtsi
deleted file mode 100644
index bf7e4335e36a..000000000000
--- a/arch/arm/boot/dts/armada-395.dtsi
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 395 SoC.
- *
- * Copyright (C) 2016 Marvell
- *
- * Grzegorz Jaszczyk <jaz@semihalf.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "armada-39x.dtsi"
-
-/ {
-	compatible = "marvell,armada395", "marvell,armada390";
-
-	soc {
-		internal-regs {
-			pinctrl@18000 {
-				compatible = "marvell,mv88f6925-pinctrl";
-				reg = <0x18000 0x20>;
-			};
-
-			sata@a8000 {
-				compatible = "marvell,armada-380-ahci";
-				reg = <0xa8000 0x2000>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 15>;
-				status = "disabled";
-			};
-
-			usb3@f0000 {
-				compatible = "marvell,armada-380-xhci";
-				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
-				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts
deleted file mode 100644
index e8604281c3c9..000000000000
--- a/arch/arm/boot/dts/armada-398-db.dts
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 398 Development Board
- *
- * Copyright (C) 2015 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "armada-398.dtsi"
-
-/ {
-	model = "Marvell Armada 398 Development Board";
-	compatible = "marvell,a398-db", "marvell,armada398", "marvell,armada390";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000>; /* 2 GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			i2c@11000 {
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				clock-frequency = <100000>;
-			};
-
-			serial@12000 {
-				pinctrl-0 = <&uart0_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-			};
-
-			serial@12100 {
-				pinctrl-0 = <&uart1_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-			};
-
-			usb@58000 {
-				status = "okay";
-			};
-
-			flash@d0000 {
-				status = "okay";
-				pinctrl-0 = <&nand_pins>;
-				pinctrl-names = "default";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-				nand-ecc-strength = <8>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "U-Boot";
-					reg = <0 0x800000>;
-				};
-				partition@800000 {
-					label = "Linux";
-					reg = <0x800000 0x800000>;
-				};
-				partition@1000000 {
-					label = "Filesystem";
-					reg = <0x1000000 0x3f000000>;
-				};
-			};
-
-			usb3@f8000 {
-				status = "okay";
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-
-			pcie@2,0 {
-				status = "okay";
-			};
-
-			pcie@3,0 {
-				status = "okay";
-			};
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-0 = <&spi1_pins>;
-	pinctrl-names = "default";
-
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "n25q128a13", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <108000000>;
-
-		partition@0 {
-			label = "U-Boot";
-			reg = <0 0x400000>;
-		};
-
-		partition@400000 {
-			label = "Filesystem";
-			reg = <0x400000 0x1000000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-398.dtsi b/arch/arm/boot/dts/armada-398.dtsi
deleted file mode 100644
index 1f4e113fc821..000000000000
--- a/arch/arm/boot/dts/armada-398.dtsi
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 398 SoC.
- *
- * Copyright (C) 2015 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "armada-395.dtsi"
-
-/ {
-	compatible = "marvell,armada398", "marvell,armada390";
-
-	soc {
-		internal-regs {
-			pinctrl@18000 {
-				compatible = "marvell,mv88f6928-pinctrl";
-				reg = <0x18000 0x20>;
-			};
-
-			sata@e0000 {
-				compatible = "marvell,armada-380-ahci";
-				reg = <0xe0000 0x2000>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 30>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
deleted file mode 100644
index be22ec5236ac..000000000000
--- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ /dev/null
@@ -1,361 +0,0 @@
-/*
- * Device Tree Include file for Marvell 98dx3236 family SoC
- *
- * Copyright (C) 2016 Allied Telesis Labs
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
- * Contains definitions specific to the 98dx3236 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-370-xp.dtsi"
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	model = "Marvell 98DX3236 SoC";
-	compatible = "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,98dx3236-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		compatible = "marvell,armadaxp-mbus", "simple-bus";
-
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
-			  MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
-			  MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
-
-		bootrom {
-			compatible = "marvell,bootrom";
-			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
-		};
-
-		/*
-		 * 98DX3236 has 1 x1 PCIe unit Gen2.0
-		 */
-		pciec: pcie-controller@82000000 {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */>;
-
-			pcie1: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			sdramc@1400 {
-				compatible = "marvell,armada-xp-sdram-controller";
-				reg = <0x1400 0x500>;
-			};
-
-			L2: l2-cache@8000 {
-				compatible = "marvell,aurora-system-cache";
-				reg = <0x08000 0x1000>;
-				cache-id-part = <0x100>;
-				cache-level = <2>;
-				cache-unified;
-				wt-override;
-			};
-
-			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-			};
-
-			/* does not exist */
-			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
-				status = "disabled";
-			};
-
-			gpio2: gpio@18180 { /* rework some properties */
-				compatible = "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <1>; /* only gpio #32 */
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>;
-			};
-
-			systemc: system-controller@18200 {
-				compatible = "marvell,armada-370-xp-system-controller";
-				reg = <0x18200 0x500>;
-			};
-
-			gateclk: clock-gating-control@18220 {
-				compatible = "marvell,mv98dx3236-gating-clock";
-				reg = <0x18220 0x4>;
-				clocks = <&coreclk 0>;
-				#clock-cells = <1>;
-			};
-
-			cpuclk: clock-complex@18700 {
-				#clock-cells = <1>;
-				compatible = "marvell,mv98dx3236-cpu-clock";
-				reg = <0x18700 0x24>, <0x1c054 0x10>;
-				clocks = <&coreclk 1>;
-			};
-
-			corediv-clock@18740 {
-				status = "disabled";
-			};
-
-			cpu-config@21000 {
-				compatible = "marvell,armada-xp-cpu-config";
-				reg = <0x21000 0x8>;
-			};
-
-			ethernet@70000 {
-				compatible = "marvell,armada-xp-neta";
-			};
-
-			ethernet@74000 {
-				compatible = "marvell,armada-xp-neta";
-			};
-
-			xor1: xor@f0800 {
-				compatible = "marvell,orion-xor";
-				reg = <0xf0800 0x100
-				       0xf0a00 0x100>;
-				clocks = <&gateclk 22>;
-				status = "okay";
-
-				xor10 {
-					interrupts = <51>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor11 {
-					interrupts = <52>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			nand: nand@d0000 {
-				clocks = <&dfx_coredivclk 0>;
-			};
-
-			xor0: xor@f0900 {
-				compatible = "marvell,orion-xor";
-				reg = <0xF0900 0x100
-				       0xF0B00 0x100>;
-				clocks = <&gateclk 28>;
-				status = "okay";
-
-				xor00 {
-					interrupts = <94>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor01 {
-					interrupts = <95>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-		};
-
-		dfx: dfx-server@ac000000 {
-			compatible = "marvell,dfx-server", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
-			reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
-
-			coreclk: mvebu-sar@f8204 {
-				compatible = "marvell,mv98dx3236-core-clock";
-				reg = <0xf8204 0x4>;
-				#clock-cells = <1>;
-			};
-
-			dfx_coredivclk: corediv-clock@f8268 {
-				compatible = "marvell,mv98dx3236-corediv-clock";
-				reg = <0xf8268 0xc>;
-				#clock-cells = <1>;
-				clocks = <&mainpll>;
-				clock-output-names = "nand";
-			};
-		};
-
-		switch: switch@a8000000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
-
-			pp0: packet-processor@0 {
-				compatible = "marvell,prestera-98dx3236";
-				reg = <0 0x4000000>;
-				interrupts = <33>, <34>, <35>;
-				dfx = <&dfx>;
-			};
-		};
-	};
-
-	clocks {
-		/* 25 MHz reference crystal */
-		refclk: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-	};
-};
-
-&i2c0 {
-	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-	reg = <0x11000 0x100>;
-};
-
-&i2c1 {
-	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-	reg = <0x11100 0x100>;
-};
-
-&mpic {
-	reg = <0x20a00 0x2d0>, <0x21070 0x58>;
-};
-
-&rtc {
-	status = "disabled";
-};
-
-&timer {
-	compatible = "marvell,armada-xp-timer";
-	clocks = <&coreclk 2>, <&refclk>;
-	clock-names = "nbclk", "fixed";
-};
-
-&watchdog {
-	compatible = "marvell,armada-xp-wdt";
-	clocks = <&coreclk 2>, <&refclk>;
-	clock-names = "nbclk", "fixed";
-};
-
-&cpurst {
-	reg = <0x20800 0x20>;
-};
-
-&usb0 {
-	clocks = <&gateclk 18>;
-};
-
-&usb1 {
-	clocks = <&gateclk 19>;
-};
-
-&pinctrl {
-	compatible = "marvell,98dx3236-pinctrl";
-
-	spi0_pins: spi0-pins {
-		marvell,pins = "mpp0", "mpp1",
-			       "mpp2", "mpp3";
-		marvell,function = "spi0";
-	};
-};
-
-&spi0 {
-	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
-	pinctrl-0 = <&spi0_pins>;
-	pinctrl-names = "default";
-};
-
-&sdio {
-	status = "disabled";
-};
-
diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
deleted file mode 100644
index a0d81bd7312b..000000000000
--- a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Device Tree Include file for Marvell 98dx3336 family SoC
- *
- * Copyright (C) 2016 Allied Telesis Labs
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
- * Contains definitions specific to the 98dx3236 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp-98dx3236.dtsi"
-
-/ {
-	model = "Marvell 98DX3336 SoC";
-	compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
-
-	cpus {
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		internal-regs {
-			resume@20980 {
-				compatible = "marvell,98dx3336-resume-ctrl";
-				reg = <0x20980 0x10>;
-			};
-		};
-	};
-};
-
-&pp0 {
-	compatible = "marvell,prestera-98dx3336";
-};
diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
deleted file mode 100644
index bc9f824020eb..000000000000
--- a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Device Tree Include file for Marvell 98dx4521 family SoC
- *
- * Copyright (C) 2016 Allied Telesis Labs
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
- * Contains definitions specific to the 98dx4521 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp-98dx3236.dtsi"
-
-/ {
-	model = "Marvell 98DX4251 SoC";
-	compatible = "marvell,armadaxp-98dx4251", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
-
-	cpus {
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		internal-regs {
-			resume@20980 {
-				compatible = "marvell,98dx3336-resume-ctrl";
-				reg = <0x20980 0x10>;
-			};
-		};
-	};
-};
-
-&sdio {
-	status = "okay";
-};
-
-&pinctrl {
-	compatible = "marvell,98dx4251-pinctrl";
-
-	sdio_pins: sdio-pins {
-		marvell,pins = "mpp5", "mpp6", "mpp7",
-			       "mpp8", "mpp9", "mpp10";
-		marvell,function = "sd0";
-	};
-};
-
-&pp0 {
-	compatible = "marvell,prestera-98dx4251";
-	interrupts = <33>, <34>, <35>, <36>;
-};
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
deleted file mode 100644
index d0c6a01f48a6..000000000000
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Device Tree file for Marvell RD-AXPWiFiAP.
- *
- * Note: this board is shipped with a new generation boot loader that
- * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
- * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option or the
- * CONFIG_DEBUG_MVEBU_UART1_ALTERNATE option should be used.
- *
- * Copyright (C) 2013 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-xp-mv78230.dtsi"
-
-/ {
-	model = "Marvell RD-AXPWiFiAP";
-	compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
-
-		internal-regs {
-			/* UART0 */
-			serial@12000 {
-				status = "okay";
-			};
-
-			/* UART1 */
-			serial@12100 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <1>;
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				pinctrl-0 = <&ge0_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&keys_pin>;
-		pinctrl-names = "default";
-
-		reset {
-			label = "Factory Reset Button";
-			linux,code = <KEY_SETUP>;
-			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&mdio {
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	/* First mini-PCIe port */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-
-	/* Second mini-PCIe port */
-	pcie@2,0 {
-		/* Port 0, Lane 1 */
-		status = "okay";
-	};
-
-	/* Renesas uPD720202 USB 3.0 controller */
-	pcie@3,0 {
-		/* Port 0, Lane 3 */
-		status = "okay";
-	};
-};
-
-&pinctrl {
-	pinctrl-0 = <&phy_int_pin>;
-	pinctrl-names = "default";
-
-	keys_pin: keys-pin {
-		marvell,pins = "mpp33";
-		marvell,function = "gpio";
-	};
-
-	phy_int_pin: phy-int-pin {
-		marvell,pins = "mpp32";
-		marvell,function = "gpio";
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "n25q128a13", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <108000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
deleted file mode 100644
index 1b1ff17fdd9c..000000000000
--- a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Device Tree file for DB-DXBC2 board
- *
- * Copyright (C) 2016 Allied Telesis Labs
- *
- * Based on armada-xp-db.dts
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the default
- * 0xd0000000). The 0xf1000000 is the default used by the recent,
- * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
- * boards were delivered with an older version of the bootloader that
- * left internal registers mapped at 0xd0000000. If you are in this
- * situation, you should either update your bootloader (preferred
- * solution) or the below Device Tree should be adjusted.
- */
-
-/dts-v1/;
-#include "armada-xp-98dx4251.dtsi"
-
-/ {
-	model = "Marvell Bobcat2 Evaluation Board";
-	compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
-	};
-
-};
-
-&devbus_bootcs {
-	status = "okay";
-
-	/* Device Bus parameters are required */
-
-	/* Read parameters */
-	devbus,bus-width    = <16>;
-	devbus,turn-off-ps  = <60000>;
-	devbus,badr-skew-ps = <0>;
-	devbus,acc-first-ps = <124000>;
-	devbus,acc-next-ps  = <248000>;
-	devbus,rd-setup-ps  = <0>;
-	devbus,rd-hold-ps   = <0>;
-
-	/* Write parameters */
-	devbus,sync-enable = <0>;
-	devbus,wr-high-ps  = <60000>;
-	devbus,wr-low-ps   = <60000>;
-	devbus,ale-wr-ps   = <60000>;
-};
-
-&i2c0 {
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&nand {
-	status = "okay";
-	num-cs = <1>;
-	marvell,nand-keep-config;
-	marvell,nand-enable-arbiter;
-	nand-on-flash-bbt;
-	nand-ecc-strength = <4>;
-	nand-ecc-step-size = <512>;
-};
-
-&sdio {
-	pinctrl-0 = <&sdio_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	/* No CD or WP GPIOs */
-	broken-cd;
-};
-
-&spi0 {
-	status = "okay";
-
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "m25p64";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <20000000>;
-		m25p,fast-read;
-
-		partition@u-boot {
-			reg = <0x00000000 0x00100000>;
-			label = "u-boot";
-		};
-		partition@u-boot-env {
-			reg = <0x00100000 0x00040000>;
-			label = "u-boot-env";
-		};
-		partition@unused {
-			reg = <0x00140000 0x00ec0000>;
-			label = "unused";
-		};
-
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
deleted file mode 100644
index 06fce35d7491..000000000000
--- a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * Device Tree file for DB-XC3-24G4XG board
- *
- * Copyright (C) 2016 Allied Telesis Labs
- *
- * Based on armada-xp-db.dts
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the default
- * 0xd0000000). The 0xf1000000 is the default used by the recent,
- * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
- * boards were delivered with an older version of the bootloader that
- * left internal registers mapped at 0xd0000000. If you are in this
- * situation, you should either update your bootloader (preferred
- * solution) or the below Device Tree should be adjusted.
- */
-
-/dts-v1/;
-#include "armada-xp-98dx3336.dtsi"
-
-/ {
-	model = "DB-XC3-24G4XG";
-	compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x40000000>; /* 1 GB */
-	};
-};
-
-&devbus_bootcs {
-	status = "okay";
-
-	/* Device Bus parameters are required */
-
-	/* Read parameters */
-	devbus,bus-width    = <16>;
-	devbus,turn-off-ps  = <60000>;
-	devbus,badr-skew-ps = <0>;
-	devbus,acc-first-ps = <124000>;
-	devbus,acc-next-ps  = <248000>;
-	devbus,rd-setup-ps  = <0>;
-	devbus,rd-hold-ps   = <0>;
-
-	/* Write parameters */
-	devbus,sync-enable = <0>;
-	devbus,wr-high-ps  = <60000>;
-	devbus,wr-low-ps   = <60000>;
-	devbus,ale-wr-ps   = <60000>;
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&nand {
-	status = "okay";
-	num-cs = <1>;
-	marvell,nand-keep-config;
-	marvell,nand-enable-arbiter;
-	nand-on-flash-bbt;
-	nand-ecc-strength = <4>;
-	nand-ecc-step-size = <512>;
-};
-
-&spi0 {
-	status = "okay";
-
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "m25p64";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <20000000>;
-		m25p,fast-read;
-
-		partition@u-boot {
-			reg = <0x00000000 0x00100000>;
-			label = "u-boot";
-		};
-		partition@u-boot-env {
-			reg = <0x00100000 0x00040000>;
-			label = "u-boot-env";
-		};
-		partition@unused {
-			reg = <0x00140000 0x00ec0000>;
-			label = "unused";
-		};
-
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
deleted file mode 100644
index a33974254d8c..000000000000
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
- * Device Tree file for Marvell Armada XP evaluation board
- * (DB-78460-BP)
- *
- * Copyright (C) 2012-2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
-  *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the default
- * 0xd0000000). The 0xf1000000 is the default used by the recent,
- * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
- * boards were delivered with an older version of the bootloader that
- * left internal registers mapped at 0xd0000000. If you are in this
- * situation, you should either update your bootloader (preferred
- * solution) or the below Device Tree should be adjusted.
- */
-
-/dts-v1/;
-#include "armada-xp-mv78460.dtsi"
-
-/ {
-	model = "Marvell Armada XP Evaluation Board";
-	compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
-
-		devbus-bootcs {
-			status = "okay";
-
-			/* Device Bus parameters are required */
-
-			/* Read parameters */
-			devbus,bus-width    = <16>;
-			devbus,turn-off-ps  = <60000>;
-			devbus,badr-skew-ps = <0>;
-			devbus,acc-first-ps = <124000>;
-			devbus,acc-next-ps  = <248000>;
-			devbus,rd-setup-ps  = <0>;
-			devbus,rd-hold-ps   = <0>;
-
-			/* Write parameters */
-			devbus,sync-enable = <0>;
-			devbus,wr-high-ps  = <60000>;
-			devbus,wr-low-ps   = <60000>;
-			devbus,ale-wr-ps   = <60000>;
-
-			/* NOR 16 MiB */
-			nor@0 {
-				compatible = "cfi-flash";
-				reg = <0 0x1000000>;
-				bank-width = <2>;
-			};
-		};
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			serial@12100 {
-				status = "okay";
-			};
-			serial@12200 {
-				status = "okay";
-			};
-			serial@12300 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-				buffer-manager = <&bm>;
-				bm,pool-long = <0>;
-			};
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-				buffer-manager = <&bm>;
-				bm,pool-long = <1>;
-			};
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy2>;
-				phy-mode = "sgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <2>;
-			};
-			ethernet@34000 {
-				status = "okay";
-				phy = <&phy3>;
-				phy-mode = "sgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <3>;
-			};
-
-			bm@c0000 {
-				status = "okay";
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				/* No CD or WP GPIOs */
-				broken-cd;
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-
-			usb@52000 {
-				status = "okay";
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "U-Boot";
-						reg = <0 0x800000>;
-					};
-					partition@800000 {
-						label = "Linux";
-						reg = <0x800000 0x800000>;
-					};
-					partition@1000000 {
-						label = "Filesystem";
-						reg = <0x1000000 0x3f000000>;
-
-					};
-				};
-			};
-		};
-
-		bm-bppi {
-			status = "okay";
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	/*
-	 * All 6 slots are physically present as
-	 * standard PCIe slots on the board.
-	 */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-	pcie@2,0 {
-		/* Port 0, Lane 1 */
-		status = "okay";
-	};
-	pcie@3,0 {
-		/* Port 0, Lane 2 */
-		status = "okay";
-	};
-	pcie@4,0 {
-		/* Port 0, Lane 3 */
-		status = "okay";
-	};
-	pcie@9,0 {
-		/* Port 2, Lane 0 */
-		status = "okay";
-	};
-	pcie@10,0 {
-		/* Port 3, Lane 0 */
-		status = "okay";
-	};
-};
-
-&mdio {
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-
-	phy2: ethernet-phy@2 {
-		reg = <25>;
-	};
-
-	phy3: ethernet-phy@3 {
-		reg = <27>;
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "m25p64", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <20000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
deleted file mode 100644
index d62bf7bea1df..000000000000
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * Device Tree file for Marvell Armada XP development board
- * (DB-MV784MP-GP)
- *
- * Copyright (C) 2013-2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the default
- * 0xd0000000). The 0xf1000000 is the default used by the recent,
- * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
- * boards were delivered with an older version of the bootloader that
- * left internal registers mapped at 0xd0000000. If you are in this
- * situation, you should either update your bootloader (preferred
- * solution) or the below Device Tree should be adjusted.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-xp-mv78460.dtsi"
-
-/ {
-	model = "Marvell Armada XP Development Board DB-MV784MP-GP";
-	compatible = "marvell,axp-gp", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		/*
-                 * 8 GB of plug-in RAM modules by default.The amount
-                 * of memory available can be changed by the
-                 * bootloader according the size of the module
-                 * actually plugged. However, memory between
-                 * 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
-                 * the address range used for I/O (internal registers,
-                 * MBus windows).
-		 */
-		reg = <0x00000000 0x00000000 0x00000000 0xf0000000>,
-		      <0x00000001 0x00000000 0x00000001 0x00000000>;
-	};
-
-	cpus {
-		pm_pic {
-			ctrl-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>,
-				     <&gpio0 17 GPIO_ACTIVE_LOW>,
-				     <&gpio0 18 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
-
-		devbus-bootcs {
-			status = "okay";
-
-			/* Device Bus parameters are required */
-
-			/* Read parameters */
-			devbus,bus-width    = <16>;
-			devbus,turn-off-ps  = <60000>;
-			devbus,badr-skew-ps = <0>;
-			devbus,acc-first-ps = <124000>;
-			devbus,acc-next-ps  = <248000>;
-			devbus,rd-setup-ps  = <0>;
-			devbus,rd-hold-ps   = <0>;
-
-			/* Write parameters */
-			devbus,sync-enable = <0>;
-			devbus,wr-high-ps  = <60000>;
-			devbus,wr-low-ps   = <60000>;
-			devbus,ale-wr-ps   = <60000>;
-
-			/* NOR 16 MiB */
-			nor@0 {
-				compatible = "cfi-flash";
-				reg = <0 0x1000000>;
-				bank-width = <2>;
-			};
-		};
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			serial@12100 {
-				status = "okay";
-			};
-			serial@12200 {
-				status = "okay";
-			};
-			serial@12300 {
-				status = "okay";
-			};
-			pinctrl {
-				pinctrl-0 = <&pic_pins>;
-				pinctrl-names = "default";
-				pic_pins: pic-pins-0 {
-					marvell,pins = "mpp16", "mpp17",
-						       "mpp18";
-					marvell,function = "gpio";
-				};
-			};
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "qsgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <0>;
-			};
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "qsgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <1>;
-			};
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy2>;
-				phy-mode = "qsgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <2>;
-			};
-			ethernet@34000 {
-				status = "okay";
-				phy = <&phy3>;
-				phy-mode = "qsgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <3>;
-			};
-
-			/* Front-side USB slot */
-			usb@50000 {
-				status = "okay";
-			};
-
-			/* Back-side USB slot */
-			usb@51000 {
-				status = "okay";
-			};
-
-			bm@c0000 {
-				status = "okay";
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-			};
-		};
-
-		bm-bppi {
-			status = "okay";
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	/*
-	 * The 3 slots are physically present as
-	 * standard PCIe slots on the board.
-	 */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-	pcie@9,0 {
-		/* Port 2, Lane 0 */
-		status = "okay";
-	};
-	pcie@10,0 {
-		/* Port 3, Lane 0 */
-		status = "okay";
-	};
-};
-
-&mdio {
-	phy0: ethernet-phy@0 {
-		reg = <16>;
-	};
-
-	phy1: ethernet-phy@1 {
-		reg = <17>;
-	};
-
-	phy2: ethernet-phy@2 {
-		reg = <18>;
-	};
-
-	phy3: ethernet-phy@3 {
-		reg = <19>;
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "n25q128a13", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <108000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
deleted file mode 100644
index ce0afba1ce58..000000000000
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ /dev/null
@@ -1,327 +0,0 @@
-/*
- * Device Tree file for Lenovo Iomega ix4-300d
- *
- * Copyright (C) 2014, Benoit Masson <yahoo@perenite.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-xp-mv78230.dtsi"
-
-/ {
-	model = "Lenovo Iomega ix4-300d";
-	compatible = "lenovo,ix4-300d", "marvell,armadaxp-mv78230",
-		     "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x20000000>; /* 512MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
-			MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
-			MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				pinctrl-0 = <&ge0_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				clock-frequency = <400000>;
-				status = "okay";
-
-				adt7473@2e {
-					compatible = "adi,adt7473";
-					reg = <0x2e>;
-				};
-
-				eeprom@50 {
-					compatible = "atmel,24c64";
-					reg = <0x50>;
-				};
-
-				pcf8563@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-				};
-
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "u-boot";
-						reg = <0x00000000 0x000e0000>;
-						read-only;
-					};
-
-					partition@e0000 {
-						label = "u-boot-env";
-						reg = <0x000e0000 0x00020000>;
-						read-only;
-					};
-
-					partition@100000 {
-						label = "u-boot-env2";
-						reg = <0x00100000 0x00020000>;
-						read-only;
-					};
-
-					partition@120000 {
-						label = "zImage";
-						reg = <0x00120000 0x00400000>;
-					};
-
-					partition@520000 {
-						label = "initrd";
-						reg = <0x00520000 0x00400000>;
-					};
-
-					partition@e00000 {
-						label = "boot";
-						reg = <0x00e00000 0x3f200000>;
-					};
-				};
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&power_button_pin &reset_button_pin
-			&select_button_pin &scroll_button_pin>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		};
-
-		select-button {
-			label = "Select Button";
-			linux,code = <BTN_SELECT>;
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-
-		scroll-button {
-			label = "Scroll Button";
-			linux,code = <KEY_SCROLLDOWN>;
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	spi3 {
-		compatible = "spi-gpio";
-		status = "okay";
-		gpio-sck = <&gpio0 25 GPIO_ACTIVE_LOW>;
-		gpio-mosi = <&gpio1 15 GPIO_ACTIVE_LOW>; /*gpio 47*/
-		cs-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio_spi: gpio_spi@0 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0>;
-			registers-number = <1>;
-			spi-max-frequency = <100000>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&hdd_led_pin>;
-		pinctrl-names = "default";
-
-		hdd-led {
-			label = "ix4-300d:hdd:blue";
-			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		power-led {
-			label = "ix4-300d:power:white";
-			gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>;
-			/* init blinking while booting */
-			linux,default-trigger = "timer";
-			default-state = "on";
-		};
-
-		sysfail-led {
-			label = "ix4-300d:sysfail:red";
-			gpios = <&gpio_spi 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		sys-led {
-			label = "ix4-300d:sys:blue";
-			gpios = <&gpio_spi 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		hddfail-led {
-			label = "ix4-300d:hddfail:red";
-			gpios = <&gpio_spi 4 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-	};
-
-	/*
-	 * Warning: you need both eth1 & 0 PHY initialized (i.e having
-	 * them up does the tweak) for poweroff to shutdown otherwise it
-	 * reboots
-	 */
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&poweroff_pin>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
-	};
-};
-&pciec {
-	status = "okay";
-
-	/* Quad port sata: Marvell 88SX7042 */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-
-	/* USB 3.0 xHCI controller: NEC D720200F1 */
-	pcie@5,0 {
-		/* Port 1, Lane 0 */
-		status = "okay";
-	};
-};
-
-&mdio {
-	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-		reg = <0>;
-	};
-
-	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-		reg = <1>;
-	};
-};
-
-&pinctrl {
-	poweroff_pin: poweroff-pin {
-		marvell,pins = "mpp24";
-		marvell,function = "gpio";
-	};
-
-	power_button_pin: power-button-pin {
-		marvell,pins = "mpp44";
-		marvell,function = "gpio";
-	};
-
-	reset_button_pin: reset-button-pin {
-		marvell,pins = "mpp45";
-		marvell,function = "gpio";
-	};
-	select_button_pin: select-button-pin {
-		marvell,pins = "mpp41";
-		marvell,function = "gpio";
-	};
-
-	scroll_button_pin: scroll-button-pin {
-		marvell,pins = "mpp42";
-		marvell,function = "gpio";
-	};
-
-	hdd_led_pin: hdd-led-pin {
-		marvell,pins = "mpp26";
-		marvell,function = "gpio";
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
deleted file mode 100644
index 6d705f518254..000000000000
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ /dev/null
@@ -1,467 +0,0 @@
-/*
- * Device Tree file for the Linksys WRT1900AC (Mamba).
- *
- * Note: this board is shipped with a new generation boot loader that
- * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
- * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option should be
- * used.
- *
- * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
- *
- * Based on armada-xp-axpwifiap.dts:
- *
- *     Copyright (C) 2013 Marvell
- *
- *     Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-xp-mv78230.dtsi"
-
-/ {
-	model = "Linksys WRT1900AC";
-	compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
-		     "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &uart0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
-
-		internal-regs {
-
-			rtc@10300 {
-				/* No crystal connected to the internal RTC */
-				status = "disabled";
-			};
-
-			/* J10: VCC, NC, RX, NC, TX, GND  */
-			serial@12000 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <1>;
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				pinctrl-0 = <&ge0_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy-mode = "rgmii-id";
-				buffer-manager = <&bm>;
-				bm,pool-long = <0>;
-				bm,pool-short = <1>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy-mode = "rgmii-id";
-				buffer-manager = <&bm>;
-				bm,pool-long = <2>;
-				bm,pool-short = <3>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			/* USB part of the eSATA/USB 2.0 port */
-			usb@50000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-
-				tmp421@4c {
-					compatible = "ti,tmp421";
-					reg = <0x4c>;
-				};
-
-				tlc59116@68 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#gpio-cells = <2>;
-					compatible = "ti,tlc59116";
-					reg = <0x68>;
-
-					wan_amber@0 {
-						label = "mamba:amber:wan";
-						reg = <0x0>;
-					};
-
-					wan_white@1 {
-						label = "mamba:white:wan";
-						reg = <0x1>;
-					};
-
-					wlan_2g@2 {
-						label = "mamba:white:wlan_2g";
-						reg = <0x2>;
-					};
-
-					wlan_5g@3 {
-						label = "mamba:white:wlan_5g";
-						reg = <0x3>;
-					};
-
-					esata@4 {
-						label = "mamba:white:esata";
-						reg = <0x4>;
-						linux,default-trigger = "disk-activity";
-					};
-
-					usb2@5 {
-						label = "mamba:white:usb2";
-						reg = <0x5>;
-					};
-
-					usb3_1@6 {
-						label = "mamba:white:usb3_1";
-						reg = <0x6>;
-					};
-
-					usb3_2@7 {
-						label = "mamba:white:usb3_2";
-						reg = <0x7>;
-					};
-
-					wps_white@8 {
-						label = "mamba:white:wps";
-						reg = <0x8>;
-					};
-
-					wps_amber@9 {
-						label = "mamba:amber:wps";
-						reg = <0x9>;
-					};
-				};
-			};
-
-			bm@c8000 {
-				status = "okay";
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0x100000>;  /* 1MB */
-					read-only;
-				};
-
-				partition@100000 {
-					label = "u_env";
-					reg = <0x100000 0x40000>;    /* 256KB */
-				};
-
-				partition@140000 {
-					label = "s_env";
-					reg = <0x140000 0x40000>;    /* 256KB */
-				};
-
-				partition@900000 {
-					label = "devinfo";
-					reg = <0x900000 0x100000>;   /* 1MB */
-					read-only;
-				};
-
-				/* kernel1 overlaps with rootfs1 by design */
-				partition@a00000 {
-					label = "kernel1";
-					reg = <0xa00000 0x2800000>;  /* 40MB */
-				};
-
-				partition@d00000 {
-					label = "rootfs1";
-					reg = <0xd00000 0x2500000>;  /* 37MB */
-				};
-
-				/* kernel2 overlaps with rootfs2 by design */
-				partition@3200000 {
-					label = "kernel2";
-					reg = <0x3200000 0x2800000>; /* 40MB */
-				};
-
-				partition@3500000 {
-					label = "rootfs2";
-					reg = <0x3500000 0x2500000>; /* 37MB */
-				};
-
-				/*
-				 * 38MB, last MB is for the BBT, not writable
-				 */
-				partition@5a00000 {
-					label = "syscfg";
-					reg = <0x5a00000 0x2600000>;
-				};
-
-				/*
-				 * Unused area between "s_env" and "devinfo".
-				 * Moved here because otherwise the renumbered
-				 * partitions would break the bootloader
-				 * supplied bootargs
-				 */
-				partition@180000 {
-					label = "unused_area";
-					reg = <0x180000 0x780000>;   /* 7.5MB */
-				};
-			};
-		};
-
-		bm-bppi {
-			status = "okay";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&keys_pin>;
-		pinctrl-names = "default";
-
-		wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-		};
-
-		reset {
-			label = "Factory Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&power_led_pin>;
-		pinctrl-names = "default";
-
-		power {
-			label = "mamba:white:power";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
-
-	pwm_fan {
-		/* SUNON HA4010V4-0000-C99 */
-
-		compatible = "pwm-fan";
-		pwms = <&gpio0 24 4000>;
-	};
-
-	dsa {
-		status = "disabled";
-
-		compatible = "marvell,dsa";
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		dsa,ethernet = <&eth0>;
-		dsa,mii-bus = <&mdio>;
-
-		switch@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0 0>;	/* MDIO address 0, switch 0 in tree */
-
-			port@0 {
-				reg = <0>;
-				label = "lan4";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan3";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan2";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan1";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "internet";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-			};
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	/* Etron EJ168 USB 3.0 controller */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-
-	/* First mini-PCIe port */
-	pcie@2,0 {
-		/* Port 0, Lane 1 */
-		status = "okay";
-	};
-
-	/* Second mini-PCIe port */
-	pcie@3,0 {
-		/* Port 0, Lane 3 */
-		status = "okay";
-	};
-};
-
-&pinctrl {
-
-	keys_pin: keys-pin {
-		marvell,pins = "mpp32", "mpp33";
-		marvell,function = "gpio";
-	};
-
-	power_led_pin: power-led-pin {
-		marvell,pins = "mpp40";
-		marvell,function = "gpio";
-	};
-
-	gpio_fan_pin: gpio-fan-pin {
-		marvell,pins = "mpp24";
-		marvell,function = "gpio";
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "everspin,mr25h256";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <40000000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	switch@0 {
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan4";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan3";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan2";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan1";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "internet";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-				ethernet = <&eth0>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts
deleted file mode 100644
index 977f6b3fc1f8..000000000000
--- a/arch/arm/boot/dts/armada-xp-matrix.dts
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Device Tree file for Marvell Armada XP Matrix board
- *
- * Copyright (C) 2013 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "armada-xp-mv78460.dtsi"
-
-/ {
-	model = "Marvell Armada XP Matrix Board";
-	compatible = "marvell,axp-matrix", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		/*
-		 * This board has 4 GB of RAM, but the last 256 MB of
-		 * RAM are not usable due to the overlap with the MBus
-		 * Window address range
-		 */
-		reg = <0 0x00000000 0 0xf0000000>;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			serial@12100 {
-				status = "okay";
-			};
-			serial@12200 {
-				status = "okay";
-			};
-			serial@12300 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			ethernet@30000 {
-				status = "okay";
-				phy-mode = "sgmii";
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
deleted file mode 100644
index 9f25814077f2..000000000000
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
- * Contains definitions specific to the Armada XP MV78230 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP MV78230 SoC";
-	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-xp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		/*
-		 * MV78230 has 2 PCIe units Gen2.0: One unit can be
-		 * configured as x4 or quad x1 lanes. One unit is
-		 * x1 only.
-		 */
-		pciec: pcie-controller@82000000 {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
-				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-				0x82000000 0x3 0       MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-				0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-				0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-				0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
-
-			pcie1: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie2: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			pcie3: pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-
-			pcie4: pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			pcie5: pcie@5,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x2800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			gpio0: gpio@18100 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18100 0x40>, <0x181c0 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18140 0x40>, <0x181c8 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <17>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>;
-				clocks = <&coreclk 0>;
-			};
-		};
-	};
-};
-
-&pinctrl {
-	compatible = "marvell,mv78230-pinctrl";
-};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
deleted file mode 100644
index 2bfe07aebf1a..000000000000
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
- * Contains definitions specific to the Armada XP MV78260 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP MV78260 SoC";
-	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-xp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		/*
-		 * MV78260 has 3 PCIe units Gen2.0: Two units can be
-		 * configured as x4 or quad x1 lanes. One unit is
-		 * x4 only.
-		 */
-		pciec: pcie-controller@82000000 {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
-				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
-				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
-				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-
-				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
-				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
-				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
-				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
-				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
-				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
-				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
-
-				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
-				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
-
-			pcie1: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie2: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			pcie3: pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-
-			pcie4: pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			pcie5: pcie@5,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x2800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-
-			pcie6: pcie@6,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
-				reg = <0x3000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
-					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 63>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 10>;
-				status = "disabled";
-			};
-
-			pcie7: pcie@7,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
-				reg = <0x3800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
-					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 64>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 11>;
-				status = "disabled";
-			};
-
-			pcie8: pcie@8,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
-				reg = <0x4000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
-					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 65>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 12>;
-				status = "disabled";
-			};
-
-			pcie9: pcie@9,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-				reg = <0x4800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 26>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			gpio0: gpio@18100 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18100 0x40>, <0x181c0 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18140 0x40>, <0x181c8 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>, <90>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio2: gpio@18180 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <3>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <91>;
-			};
-
-			eth3: ethernet@34000 {
-				compatible = "marvell,armada-xp-neta";
-				reg = <0x34000 0x4000>;
-				interrupts = <14>;
-				clocks = <&gateclk 1>;
-				status = "disabled";
-			};
-		};
-	};
-};
-
-&pinctrl {
-	compatible = "marvell,mv78260-pinctrl";
-};
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
deleted file mode 100644
index 6c33935f7074..000000000000
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ /dev/null
@@ -1,380 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
- * Contains definitions specific to the Armada XP MV78460 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP MV78460 SoC";
-	compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-	};
-
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-xp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <2>;
-			clocks = <&cpuclk 2>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <3>;
-			clocks = <&cpuclk 3>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		/*
-		 * MV78460 has 4 PCIe units Gen2.0: Two units can be
-		 * configured as x4 or quad x1 lanes. Two units are
-		 * x4/x1.
-		 */
-		pciec: pcie-controller@82000000 {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
-				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
-				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
-				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
-				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-
-				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
-				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
-				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
-				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
-				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
-				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
-				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
-
-				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
-				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */
-
-				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
-				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
-
-			pcie1: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie2: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			pcie3: pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-
-			pcie4: pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			pcie5: pcie@5,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-				reg = <0x2800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-
-			pcie6: pcie@6,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
-				reg = <0x3000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
-					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 63>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 10>;
-				status = "disabled";
-			};
-
-			pcie7: pcie@7,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
-				reg = <0x3800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
-					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 64>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 11>;
-				status = "disabled";
-			};
-
-			pcie8: pcie@8,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
-				reg = <0x4000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
-					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 65>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 12>;
-				status = "disabled";
-			};
-
-			pcie9: pcie@9,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
-				reg = <0x4800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 26>;
-				status = "disabled";
-			};
-
-			pcie10: pcie@10,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
-				reg = <0x5000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
-					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 103>;
-				marvell,pcie-port = <3>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 27>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			gpio0: gpio@18100 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18100 0x40>, <0x181c0 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18140 0x40>, <0x181c8 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>, <90>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio2: gpio@18180 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <3>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <91>;
-			};
-
-			eth3: ethernet@34000 {
-				compatible = "marvell,armada-xp-neta";
-				reg = <0x34000 0x4000>;
-				interrupts = <14>;
-				clocks = <&gateclk 1>;
-				status = "disabled";
-			};
-		};
-	};
-};
-
-&pinctrl {
-	compatible = "marvell,mv78460-pinctrl";
-};
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
deleted file mode 100644
index 40c6fe21e720..000000000000
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ /dev/null
@@ -1,384 +0,0 @@
-/*
- * Device Tree file for NETGEAR ReadyNAS 2120
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-xp-mv78230.dtsi"
-
-/ {
-	model = "NETGEAR ReadyNAS 2120";
-	compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x80000000>; /* 2GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
-
-		internal-regs {
-
-			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
-			rtc@10300 {
-				status = "disabled";
-			};
-
-			i2c@11000 {
-				clock-frequency = <400000>;
-				status = "okay";
-
-				/* Controller for rear fan #1 of 3 (Protechnic
-				 * MGT4012XB-O20, 8000RPM) near eSATA port */
-				g762_fan1: g762@3e {
-					compatible = "gmt,g762";
-					reg = <0x3e>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-
-				/*  Controller for rear (center) fan #2 of 3 */
-				g762_fan2: g762@48 {
-					compatible = "gmt,g762";
-					reg = <0x48>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-
-				/*  Controller for rear fan #3 of 3 */
-				g762_fan3: g762@49 {
-					compatible = "gmt,g762";
-					reg = <0x49>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-
-				/* Temperature sensor */
-				g751: g751@4c {
-					compatible = "gmt,g751";
-					reg = <0x4c>;
-				};
-
-				isl12057: isl12057@68 {
-					compatible = "isil,isl12057";
-					reg = <0x68>;
-					wakeup-source;
-				};
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			/* Front USB 2.0 port */
-			usb@50000 {
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				pinctrl-0 = <&ge0_rgmii_pins>;
-				pinctrl-names = "default";
-
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			/* Two rear eSATA ports */
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				/* Use Hardware BCH ECC */
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0x180000>;  /* 1.5MB */
-					read-only;
-				};
-
-				partition@180000 {
-					label = "u-boot-env";
-					reg = <0x180000 0x20000>;    /* 128KB */
-					read-only;
-				};
-
-				partition@200000 {
-					label = "uImage";
-					reg = <0x0200000 0x600000>;    /* 6MB */
-				};
-
-				partition@800000 {
-					label = "minirootfs";
-					reg = <0x0800000 0x400000>;    /* 4MB */
-				};
-
-				/* Last MB is for the BBT, i.e. not writable */
-				partition@c00000 {
-					label = "ubifs";
-					reg = <0x0c00000 0x7400000>; /* 116MB */
-				};
-			};
-		};
-	};
-
-	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&sata1_led_pin &sata2_led_pin &err_led_pin
-			     &sata3_led_pin &sata4_led_pin>;
-		pinctrl-names = "default";
-
-		red-sata1-led {
-			label = "rn2120:red:sata1";
-			gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red-sata2-led {
-			label = "rn2120:red:sata2";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red-sata3-led {
-			label = "rn2120:red:sata3";
-			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red-sata4-led {
-			label = "rn2120:red:sata4";
-			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red-err-led {
-			label = "rn2120:red:err";
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&power_button_pin &reset_button_pin>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&poweroff>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	/* Connected to first Marvell 88SE9170 SATA controller */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-
-	/* Connected to second Marvell 88SE9170 SATA controller */
-	pcie@2,0 {
-		/* Port 0, Lane 1 */
-		status = "okay";
-	};
-
-	/* Connected to Fresco Logic FL1009 USB 3.0 controller */
-	pcie@5,0 {
-		/* Port 1, Lane 0 */
-		status = "okay";
-	};
-};
-
-&mdio {
-	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-		reg = <0>;
-	};
-
-	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-		reg = <1>;
-	};
-};
-
-
-&pinctrl {
-	poweroff: poweroff {
-		marvell,pins = "mpp42";
-		marvell,function = "gpio";
-	};
-
-	power_button_pin: power-button-pin {
-		marvell,pins = "mpp27";
-		marvell,function = "gpio";
-	};
-
-	reset_button_pin: reset-button-pin {
-		marvell,pins = "mpp41";
-		marvell,function = "gpio";
-	};
-
-	sata1_led_pin: sata1-led-pin {
-		marvell,pins = "mpp31";
-		marvell,function = "gpio";
-	};
-
-	sata2_led_pin: sata2-led-pin {
-		marvell,pins = "mpp40";
-		marvell,function = "gpio";
-	};
-
-	sata3_led_pin: sata3-led-pin {
-		marvell,pins = "mpp44";
-		marvell,function = "gpio";
-	};
-
-	sata4_led_pin: sata4-led-pin {
-		marvell,pins = "mpp47";
-		marvell,function = "gpio";
-	};
-
-	sata1_power_pin: sata1-power-pin {
-		marvell,pins = "mpp24";
-		marvell,function = "gpio";
-	};
-
-	sata2_power_pin: sata2-power-pin {
-		marvell,pins = "mpp25";
-		marvell,function = "gpio";
-	};
-
-	sata3_power_pin: sata3-power-pin {
-		marvell,pins = "mpp26";
-		marvell,function = "gpio";
-	};
-
-	sata4_power_pin: sata4-power-pin {
-		marvell,pins = "mpp28";
-		marvell,function = "gpio";
-	};
-
-	sata1_pres_pin: sata1-pres-pin {
-		marvell,pins = "mpp32";
-		marvell,function = "gpio";
-	};
-
-	sata2_pres_pin: sata2-pres-pin {
-		marvell,pins = "mpp33";
-		marvell,function = "gpio";
-	};
-
-	sata3_pres_pin: sata3-pres-pin {
-		marvell,pins = "mpp34";
-		marvell,function = "gpio";
-	};
-
-	sata4_pres_pin: sata4-pres-pin {
-		marvell,pins = "mpp35";
-		marvell,function = "gpio";
-	};
-
-	err_led_pin: err-led-pin {
-		marvell,pins = "mpp45";
-		marvell,function = "gpio";
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
deleted file mode 100644
index 66b78131a038..000000000000
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * Device Tree file for OpenBlocks AX3-4 board
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-xp-mv78260.dtsi"
-
-/ {
-	model = "PlatHome OpenBlocks AX3-4 board";
-	compatible = "plathome,openblocks-ax3-4", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xe8000000 0x8000000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0 0xd1200000 0x100000>;
-
-		devbus-bootcs {
-			status = "okay";
-
-			/* Device Bus parameters are required */
-
-			/* Read parameters */
-			devbus,bus-width    = <16>;
-			devbus,turn-off-ps  = <60000>;
-			devbus,badr-skew-ps = <0>;
-			devbus,acc-first-ps = <124000>;
-			devbus,acc-next-ps  = <248000>;
-			devbus,rd-setup-ps  = <0>;
-			devbus,rd-hold-ps   = <0>;
-
-			/* Write parameters */
-			devbus,sync-enable = <0>;
-			devbus,wr-high-ps  = <60000>;
-			devbus,wr-low-ps   = <60000>;
-			devbus,ale-wr-ps   = <60000>;
-
-			/* NOR 128 MiB */
-			nor@0 {
-				compatible = "cfi-flash";
-				reg = <0 0x8000000>;
-				bank-width = <2>;
-			};
-		};
-
-		internal-regs {
-			rtc@10300 {
-				/* No crystal connected to the internal RTC */
-				status = "disabled";
-			};
-			serial@12000 {
-				status = "okay";
-			};
-			serial@12100 {
-				status = "okay";
-			};
-
-			leds {
-				compatible = "gpio-leds";
-				pinctrl-names = "default";
-				pinctrl-0 = <&led_pins>;
-
-				red_led {
-					label = "red_led";
-					gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-					default-state = "off";
-				};
-
-				yellow_led {
-					label = "yellow_led";
-					gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-					default-state = "off";
-				};
-
-				green_led {
-					label = "green_led";
-					gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-					default-state = "keep";
-				};
-			};
-
-			gpio_keys {
-				compatible = "gpio-keys";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				init {
-					label = "Init Button";
-					linux,code = <KEY_POWER>;
-					gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "sgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <0>;
-			};
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "sgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <1>;
-			};
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy2>;
-				phy-mode = "sgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <2>;
-			};
-			ethernet@34000 {
-				status = "okay";
-				phy = <&phy3>;
-				phy-mode = "sgmii";
-				buffer-manager = <&bm>;
-				bm,pool-long = <3>;
-			};
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <400000>;
-			};
-			i2c@11100 {
-				status = "okay";
-				clock-frequency = <400000>;
-
-				s35390a: s35390a@30 {
-					compatible = "s35390a";
-					reg = <0x30>;
-				};
-			};
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			/* Front side USB 0 */
-			usb@50000 {
-				status = "okay";
-			};
-
-			/* Front side USB 1 */
-			usb@51000 {
-				status = "okay";
-			};
-
-			bm@c0000 {
-				status = "okay";
-			};
-		};
-
-		bm-bppi {
-			status = "okay";
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-	/* Internal mini-PCIe connector */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-};
-
-&mdio {
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-
-	phy2: ethernet-phy@2 {
-		reg = <2>;
-	};
-
-	phy3: ethernet-phy@3 {
-		reg = <3>;
-	};
-};
-
-&pinctrl {
-	led_pins: led-pins-0 {
-		marvell,pins = "mpp49", "mpp51", "mpp53";
-		marvell,function = "gpio";
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
deleted file mode 100644
index d8e05bab0cee..000000000000
--- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts
+++ /dev/null
@@ -1,365 +0,0 @@
-/*
- * Device Tree file for Synology DS414
- *
- * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the old 0xd0000000).
- * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
- * bootloaders provided by Marvell. It is used in recent versions of
- * DSM software provided by Synology. Nonetheless, some earlier boards
- * were delivered with an older version of u-boot that left internal
- * registers mapped at 0xd0000000. If you have such a device you will
- * not be able to directly boot a kernel based on this Device Tree. In
- * that case, the preferred solution is to update your bootloader (e.g.
- * by upgrading to latest version of DSM, or building a new one and
- * installing it from u-boot prompt) or adjust the Devive Tree
- * (s/0xf1000000/0xd0000000/ in 'ranges' below).
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-xp-mv78230.dtsi"
-
-/ {
-	model = "Synology DS414";
-	compatible = "synology,ds414", "marvell,armadaxp-mv78230",
-		     "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x40000000>; /* 1GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
-
-		internal-regs {
-
-			/* RTC is provided by Seiko S-35390A below */
-			rtc@10300 {
-				status = "disabled";
-			};
-
-			i2c@11000 {
-				clock-frequency = <400000>;
-				status = "okay";
-
-				s35390a: s35390a@30 {
-					 compatible = "sii,s35390a";
-					 reg = <0x30>;
-				};
-			};
-
-			/* Connected to a header on device's PCB. This
-			 * provides the main console for the device.
-			 *
-			 * Warning: the device may not boot with a 3.3V
-			 * USB-serial converter connected when the power
-			 * button is pressed. The converter needs to be
-			 * connected a few seconds after pressing the
-			 * power button. This is possibly due to UART0_TXD
-			 * pin being sampled at reset (bit 0 of SAR).
-			 */
-			serial@12000 {
-				status = "okay";
-			};
-
-			/* Connected to a Microchip PIC16F883 for power control */
-			serial@12100 {
-				status = "okay";
-			};
-
-			poweroff@12100 {
-				compatible = "synology,power-off";
-				reg = <0x12100 0x100>;
-				clocks = <&coreclk 0>;
-			};
-
-			/* Front USB 2.0 port */
-			usb@50000 {
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				pinctrl-0 = <&ge0_rgmii_pins>;
-				pinctrl-names = "default";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@74000 {
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin
-			     &sata3_pwr_pin &sata4_pwr_pin>;
-		pinctrl-names = "default";
-
-		sata1_regulator: sata1-regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <2000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-
-		sata2_regulator: sata2-regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "SATA2 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <4000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		sata3_regulator: sata3-regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "SATA3 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <6000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
-
-		sata4_regulator: sata4-regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "SATA4 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <8000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&pciec {
-	status = "okay";
-
-	/*
-	 * Connected to Marvell 88SX7042 SATA-II controller
-	 * handling the four disks.
-	 */
-	pcie@1,0 {
-		/* Port 0, Lane 0 */
-		status = "okay";
-	};
-
-	/*
-	 * Connected to EtronTech EJ168A XHCI controller
-	 * providing the two rear USB 3.0 ports.
-	 */
-	pcie@5,0 {
-		/* Port 1, Lane 0 */
-		status = "okay";
-	};
-};
-
-
-&mdio {
-	phy0: ethernet-phy@0 { /* Marvell 88E1512 */
-		reg = <0>;
-	};
-
-	phy1: ethernet-phy@1 { /* Marvell 88E1512 */
-		reg = <1>;
-	};
-};
-
-&pinctrl {
-	sata1_pwr_pin: sata1-pwr-pin {
-		marvell,pins = "mpp42";
-		marvell,function = "gpio";
-	};
-
-	sata2_pwr_pin: sata2-pwr-pin {
-		marvell,pins = "mpp44";
-		marvell,function = "gpio";
-	};
-
-	sata3_pwr_pin: sata3-pwr-pin {
-		marvell,pins = "mpp45";
-		marvell,function = "gpio";
-	};
-
-	sata4_pwr_pin: sata4-pwr-pin {
-		marvell,pins = "mpp46";
-		marvell,function = "gpio";
-	};
-
-	sata1_pres_pin: sata1-pres-pin {
-		marvell,pins = "mpp34";
-		marvell,function = "gpio";
-	};
-
-	sata2_pres_pin: sata2-pres-pin {
-		marvell,pins = "mpp35";
-		marvell,function = "gpio";
-	};
-
-	sata3_pres_pin: sata3-pres-pin {
-		marvell,pins = "mpp40";
-		marvell,function = "gpio";
-	};
-
-	sata4_pres_pin: sata4-pres-pin {
-		marvell,pins = "mpp41";
-		marvell,function = "gpio";
-	};
-
-	syno_id_bit0_pin: syno-id-bit0-pin {
-		marvell,pins = "mpp26";
-		marvell,function = "gpio";
-	};
-
-	syno_id_bit1_pin: syno-id-bit1-pin {
-		marvell,pins = "mpp28";
-		marvell,function = "gpio";
-	};
-
-	syno_id_bit2_pin: syno-id-bit2-pin {
-		marvell,pins = "mpp29";
-		marvell,function = "gpio";
-	};
-
-	fan1_alarm_pin: fan1-alarm-pin {
-		marvell,pins = "mpp33";
-		marvell,function = "gpio";
-	};
-
-	fan2_alarm_pin: fan2-alarm-pin {
-		marvell,pins = "mpp32";
-		marvell,function = "gpio";
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q064", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <20000000>;
-
-		/*
-		 * Warning!
-		 *
-		 * Synology u-boot uses its compiled-in environment
-		 * and it seems Synology did not care to change u-boot
-		 * default configuration in order to allow saving a
-		 * modified environment at a sensible location. So,
-		 * if you do a 'saveenv' under u-boot, your modified
-		 * environment will be saved at 1MB after the start
-		 * of the flash, i.e. in the middle of the uImage.
-		 * For that reason, it is strongly advised not to
-		 * change the default environment, unless you know
-		 * what you are doing.
-		 */
-		partition@00000000 { /* u-boot */
-			label = "RedBoot";
-			reg = <0x00000000 0x000d0000>; /* 832KB */
-		};
-
-		partition@000c0000 { /* uImage */
-			label = "zImage";
-			reg = <0x000d0000 0x002d0000>; /* 2880KB */
-		};
-
-		partition@003a0000 { /* uInitramfs */
-			label = "rd.gz";
-			reg = <0x003a0000 0x00430000>; /* 4250KB */
-		};
-
-		partition@007d0000 { /* MAC address and serial number */
-			label = "vendor";
-			reg = <0x007d0000 0x00010000>; /* 64KB */
-		};
-
-		partition@007e0000 {
-			label = "RedBoot config";
-			reg = <0x007e0000 0x00010000>; /* 64KB */
-		};
-
-		partition@007f0000 {
-			label = "FIS directory";
-			reg = <0x007f0000 0x00010000>; /* 64KB */
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armv7-m.dtsi b/arch/arm/boot/dts/armv7-m.dtsi
index ba332e399be4..26f5443d85e1 100644
--- a/arch/arm/boot/dts/armv7-m.dtsi
+++ b/arch/arm/boot/dts/armv7-m.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 / {
 	nvic: interrupt-controller@e000e100  {
 		compatible = "arm,armv7m-nvic";
diff --git a/arch/arm/boot/dts/artpec6-devboard.dts b/arch/arm/boot/dts/artpec6-devboard.dts
deleted file mode 100644
index 9dfe845694cf..000000000000
--- a/arch/arm/boot/dts/artpec6-devboard.dts
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Axis ARTPEC-6 development board.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "artpec6.dtsi"
-
-/ {
-	model = "ARTPEC-6 development board";
-	compatible = "axis,artpec6-dev-board", "axis,artpec6";
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
-	chosen {
-		stdout-path = "serial3:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x10000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&pcie {
-	status = "okay";
-};
-
-&ethernet {
-	status = "okay";
-
-	phy-handle = <&phy1>;
-	phy-mode = "gmii";
-
-	mdio {
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-		phy1: phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			device_type = "ethernet-phy";
-			reg = <0x0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
deleted file mode 100644
index 767cbe8d8557..000000000000
--- a/arch/arm/boot/dts/artpec6.dtsi
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * Device Tree Source for the Axis ARTPEC-6 SoC
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/axis,artpec6-clkctrl.h>
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "axis,artpec6";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			next-level-cache = <&pl310>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			next-level-cache = <&pl310>;
-		};
-	};
-
-	syscon: syscon@f8000000 {
-		compatible = "axis,artpec6-syscon", "syscon";
-		reg = <0xf8000000 0x48>;
-	};
-
-	psci {
-		compatible = "arm,psci-0.2", "arm,psci";
-		method = "smc";
-		psci_version = <0x84000000>;
-		cpu_on = <0x84000003>;
-		system_reset = <0x84000009>;
-	};
-
-	scu@faf00000 {
-		compatible = "arm,cortex-a9-scu";
-		reg = <0xfaf00000 0x58>;
-	};
-
-	/* Main external clock driving CPU and peripherals */
-	ext_clk: ext_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <50000000>;
-	};
-
-	eth_phy_ref_clk: eth_phy_ref_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-	};
-
-	clkctrl: clkctrl@0xf8000000 {
-		#clock-cells = <1>;
-		compatible = "axis,artpec6-clkctrl";
-		reg = <0xf8000000 0x48>;
-		clocks = <&ext_clk>;
-		clock-names = "sys_refclk";
-	};
-
-	gtimer@faf00200 {
-		compatible = "arm,cortex-a9-global-timer";
-		reg = <0xfaf00200 0x20>;
-		interrupts = <GIC_PPI 11 0xf01>;
-		clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>;
-	};
-
-	timer@faf00600 {
-		compatible = "arm,cortex-a9-twd-timer";
-		reg = <0xfaf00600 0x20>;
-		interrupts = <GIC_PPI 13 0xf04>;
-		clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>;
-		status = "disabled";
-	};
-
-	intc: interrupt-controller@faf01000 {
-		interrupt-controller;
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		reg = < 0xfaf01000 0x1000 >, < 0xfaf00100 0x0100 >;
-	};
-
-	pl310: cache-controller@faf10000 {
-		compatible = "arm,pl310-cache";
-		cache-unified;
-		cache-level = <2>;
-		reg = <0xfaf10000 0x1000>;
-		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-		arm,data-latency = <1 1 1>;
-		arm,tag-latency = <1 1 1>;
-		arm,filter-ranges = <0x0 0x80000000>;
-		arm,double-linefill = <1>;
-		arm,double-linefill-incr = <0>;
-		arm,double-linefill-wrap = <0>;
-		prefetch-data = <1>;
-		prefetch-instr = <1>;
-		arm,prefetch-offset = <0>;
-		arm,prefetch-drop = <1>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>;
-		interrupt-parent = <&intc>;
-	};
-
-	pcie: pcie@f8050000 {
-		compatible = "axis,artpec6-pcie", "snps,dw-pcie";
-		reg = <0xf8050000 0x2000
-		       0xf8040000 0x1000
-		       0xc0000000 0x2000>;
-		reg-names = "dbi", "phy", "config";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-			  /* downstream I/O */
-		ranges = <0x81000000 0 0 0xc0002000 0 0x00010000
-			  /* non-prefetchable memory */
-			  0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>;
-		num-lanes = <2>;
-		bus-range = <0x00 0xff>;
-		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "msi";
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0x7>;
-		interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-		axis,syscon-pcie = <&syscon>;
-		status = "disabled";
-	};
-
-	amba@0 {
-		compatible = "simple-bus";
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-		interrupt-parent = <&intc>;
-		ranges;
-		dma-ranges = <0x80000000 0x00000000 0x40000000>;
-		dma-coherent;
-
-		ethernet: ethernet@f8010000 {
-			clock-names = "phy_ref_clk", "apb_pclk";
-			clocks = <&eth_phy_ref_clk>,
-				<&clkctrl ARTPEC6_CLK_ETH_ACLK>;
-			compatible = "snps,dwc-qos-ethernet-4.10";
-			interrupt-parent = <&intc>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0xf8010000 0x4000>;
-
-			snps,write-requests = <2>;
-			snps,read-requests = <16>;
-			snps,txpbl = <8>;
-			snps,rxpbl = <2>;
-
-			status = "disabled";
-		};
-
-		uart0: serial@f8036000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xf8036000 0x1000>;
-			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
-				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
-			clock-names = "uart_clk", "apb_pclk";
-			status = "disabled";
-		};
-		uart1: serial@f8037000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xf8037000 0x1000>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
-				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
-			clock-names = "uart_clk", "apb_pclk";
-			status = "disabled";
-		};
-		uart2: serial@f8038000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xf8038000 0x1000>;
-			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
-				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
-			clock-names = "uart_clk", "apb_pclk";
-			status = "disabled";
-		};
-		uart3: serial@f8039000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xf8039000 0x1000>;
-			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
-				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
-			clock-names = "uart_clk", "apb_pclk";
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
deleted file mode 100644
index 7c90dac99822..000000000000
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ /dev/null
@@ -1,61 +0,0 @@
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-
-/ {
-	model = "AST2500 EVB";
-	compatible = "aspeed,ast2500";
-
-	aliases {
-		serial4 = &uart5;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
-	};
-
-	memory {
-		reg = <0x80000000 0x20000000>;
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-	};
-};
-
-&spi1 {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-	};
-};
-
-&spi2 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
-};
-
-&mac1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
deleted file mode 100644
index 112551766275..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ /dev/null
@@ -1,63 +0,0 @@
-/dts-v1/;
-
-#include "aspeed-g4.dtsi"
-
-/ {
-	model = "Palmetto BMC";
-	compatible = "tyan,palmetto-bmc", "aspeed,ast2400";
-
-	aliases {
-		serial4 = &uart5;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
-	};
-
-	memory {
-		reg = <0x40000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vga_memory: framebuffer@5f000000 {
-			no-map;
-			reg = <0x5f000000 0x01000000>; /* 16M */
-		};
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-	};
-};
-
-&spi {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-	};
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	use-ncsi;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
deleted file mode 100644
index 1190fec1b5d0..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ /dev/null
@@ -1,81 +0,0 @@
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-
-/ {
-	model = "Romulus BMC";
-	compatible = "ibm,romulus-bmc", "aspeed,ast2500";
-
-	aliases {
-		serial4 = &uart5;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
-	};
-
-	memory {
-		reg = <0x80000000 0x40000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vga_memory: framebuffer@bf000000 {
-			no-map;
-			reg = <0xbf000000 0x01000000>; /* 16M */
-		};
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-	};
-};
-
-&uart1 {
-	/* Rear RS-232 connector */
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default
-			&pinctrl_nrts1_default
-			&pinctrl_ndtr1_default
-			&pinctrl_ndsr1_default
-			&pinctrl_ncts1_default
-			&pinctrl_ndcd1_default
-			&pinctrl_nri1_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	use-ncsi;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-};
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
deleted file mode 100644
index 8a04c7e2d818..000000000000
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ /dev/null
@@ -1,981 +0,0 @@
-#include "skeleton.dtsi"
-
-/ {
-	model = "Aspeed BMC";
-	compatible = "aspeed,ast2400";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&vic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		fmc: flash-controller@1e620000 {
-			reg = < 0x1e620000 0x94
-				0x20000000 0x02000000 >;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "aspeed,ast2400-fmc";
-			status = "disabled";
-			interrupts = <19>;
-			flash@0 {
-				reg = < 0 >;
-				compatible = "jedec,spi-nor";
-				status = "disabled";
-			};
-		};
-
-		spi: flash-controller@1e630000 {
-			reg = < 0x1e630000 0x18
-				0x30000000 0x02000000 >;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "aspeed,ast2400-spi";
-			status = "disabled";
-			flash@0 {
-				reg = < 0 >;
-				compatible = "jedec,spi-nor";
-				status = "disabled";
-			};
-		};
-
-		vic: interrupt-controller@1e6c0080 {
-			compatible = "aspeed,ast2400-vic";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			valid-sources = <0xffffffff 0x0007ffff>;
-			reg = <0x1e6c0080 0x80>;
-		};
-
-		mac0: ethernet@1e660000 {
-			compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
-			reg = <0x1e660000 0x180>;
-			interrupts = <2>;
-			status = "disabled";
-		};
-
-		mac1: ethernet@1e680000 {
-			compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
-			reg = <0x1e680000 0x180>;
-			interrupts = <3>;
-			status = "disabled";
-		};
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon: syscon@1e6e2000 {
-				compatible = "aspeed,g4-scu", "syscon", "simple-mfd";
-				reg = <0x1e6e2000 0x1a8>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-                                clk_clkin: clk_clkin {
-                                        #clock-cells = <0>;
-                                        compatible = "fixed-clock";
-                                        clock-frequency = <48000000>;
-                                };
-
-                                clk_hpll: clk_hpll@70 {
-                                        #clock-cells = <0>;
-                                        compatible = "aspeed,g4-hpll-clock", "fixed-clock";
-                                        reg = <0x70>;
-                                        clocks = <&clk_clkin>;
-                                        clock-frequency = <384000000>;
-                                };
-
-                                clk_ahb: clk_ahb@70 {
-                                        #clock-cells = <0>;
-                                        compatible = "aspeed,g4-ahb-clock", "fixed-clock";
-                                        reg = <0x70>;
-                                        clocks = <&clk_hpll>;
-                                        clock-frequency = <192000000>;
-                                };
-
-                                clk_apb: clk_apb@08 {
-                                        #clock-cells = <0>;
-                                        compatible = "aspeed,g4-apb-clock", "fixed-clock";
-                                        reg = <0x08>;
-                                        clocks = <&clk_hpll>;
-                                        clock-frequency = <48000000>;
-                                };
-
-                                clk_uart: clk_uart@2c{
-                                        #clock-cells = <0>;
-                                        compatible = "aspeed,g4-uart-clock", "fixed-clock";
-                                        reg = <0x2c>;
-                                        clock-frequency = <24000000>;
-                                };
-
-				pinctrl: pinctrl {
-					compatible = "aspeed,g4-pinctrl";
-
-					pinctrl_acpi_default: acpi_default {
-						function = "ACPI";
-						groups = "ACPI";
-					};
-
-					pinctrl_adc0_default: adc0_default {
-						function = "ADC0";
-						groups = "ADC0";
-					};
-
-					pinctrl_adc1_default: adc1_default {
-						function = "ADC1";
-						groups = "ADC1";
-					};
-
-					pinctrl_adc10_default: adc10_default {
-						function = "ADC10";
-						groups = "ADC10";
-					};
-
-					pinctrl_adc11_default: adc11_default {
-						function = "ADC11";
-						groups = "ADC11";
-					};
-
-					pinctrl_adc12_default: adc12_default {
-						function = "ADC12";
-						groups = "ADC12";
-					};
-
-					pinctrl_adc13_default: adc13_default {
-						function = "ADC13";
-						groups = "ADC13";
-					};
-
-					pinctrl_adc14_default: adc14_default {
-						function = "ADC14";
-						groups = "ADC14";
-					};
-
-					pinctrl_adc15_default: adc15_default {
-						function = "ADC15";
-						groups = "ADC15";
-					};
-
-					pinctrl_adc2_default: adc2_default {
-						function = "ADC2";
-						groups = "ADC2";
-					};
-
-					pinctrl_adc3_default: adc3_default {
-						function = "ADC3";
-						groups = "ADC3";
-					};
-
-					pinctrl_adc4_default: adc4_default {
-						function = "ADC4";
-						groups = "ADC4";
-					};
-
-					pinctrl_adc5_default: adc5_default {
-						function = "ADC5";
-						groups = "ADC5";
-					};
-
-					pinctrl_adc6_default: adc6_default {
-						function = "ADC6";
-						groups = "ADC6";
-					};
-
-					pinctrl_adc7_default: adc7_default {
-						function = "ADC7";
-						groups = "ADC7";
-					};
-
-					pinctrl_adc8_default: adc8_default {
-						function = "ADC8";
-						groups = "ADC8";
-					};
-
-					pinctrl_adc9_default: adc9_default {
-						function = "ADC9";
-						groups = "ADC9";
-					};
-
-					pinctrl_bmcint_default: bmcint_default {
-						function = "BMCINT";
-						groups = "BMCINT";
-					};
-
-					pinctrl_ddcclk_default: ddcclk_default {
-						function = "DDCCLK";
-						groups = "DDCCLK";
-					};
-
-					pinctrl_ddcdat_default: ddcdat_default {
-						function = "DDCDAT";
-						groups = "DDCDAT";
-					};
-
-					pinctrl_extrst_default: extrst_default {
-						function = "EXTRST";
-						groups = "EXTRST";
-					};
-
-					pinctrl_flack_default: flack_default {
-						function = "FLACK";
-						groups = "FLACK";
-					};
-
-					pinctrl_flbusy_default: flbusy_default {
-						function = "FLBUSY";
-						groups = "FLBUSY";
-					};
-
-					pinctrl_flwp_default: flwp_default {
-						function = "FLWP";
-						groups = "FLWP";
-					};
-
-					pinctrl_gpid_default: gpid_default {
-						function = "GPID";
-						groups = "GPID";
-					};
-
-					pinctrl_gpid0_default: gpid0_default {
-						function = "GPID0";
-						groups = "GPID0";
-					};
-
-					pinctrl_gpid2_default: gpid2_default {
-						function = "GPID2";
-						groups = "GPID2";
-					};
-
-					pinctrl_gpid4_default: gpid4_default {
-						function = "GPID4";
-						groups = "GPID4";
-					};
-
-					pinctrl_gpid6_default: gpid6_default {
-						function = "GPID6";
-						groups = "GPID6";
-					};
-
-					pinctrl_gpie0_default: gpie0_default {
-						function = "GPIE0";
-						groups = "GPIE0";
-					};
-
-					pinctrl_gpie2_default: gpie2_default {
-						function = "GPIE2";
-						groups = "GPIE2";
-					};
-
-					pinctrl_gpie4_default: gpie4_default {
-						function = "GPIE4";
-						groups = "GPIE4";
-					};
-
-					pinctrl_gpie6_default: gpie6_default {
-						function = "GPIE6";
-						groups = "GPIE6";
-					};
-
-					pinctrl_i2c10_default: i2c10_default {
-						function = "I2C10";
-						groups = "I2C10";
-					};
-
-					pinctrl_i2c11_default: i2c11_default {
-						function = "I2C11";
-						groups = "I2C11";
-					};
-
-					pinctrl_i2c12_default: i2c12_default {
-						function = "I2C12";
-						groups = "I2C12";
-					};
-
-					pinctrl_i2c13_default: i2c13_default {
-						function = "I2C13";
-						groups = "I2C13";
-					};
-
-					pinctrl_i2c14_default: i2c14_default {
-						function = "I2C14";
-						groups = "I2C14";
-					};
-
-					pinctrl_i2c3_default: i2c3_default {
-						function = "I2C3";
-						groups = "I2C3";
-					};
-
-					pinctrl_i2c4_default: i2c4_default {
-						function = "I2C4";
-						groups = "I2C4";
-					};
-
-					pinctrl_i2c5_default: i2c5_default {
-						function = "I2C5";
-						groups = "I2C5";
-					};
-
-					pinctrl_i2c6_default: i2c6_default {
-						function = "I2C6";
-						groups = "I2C6";
-					};
-
-					pinctrl_i2c7_default: i2c7_default {
-						function = "I2C7";
-						groups = "I2C7";
-					};
-
-					pinctrl_i2c8_default: i2c8_default {
-						function = "I2C8";
-						groups = "I2C8";
-					};
-
-					pinctrl_i2c9_default: i2c9_default {
-						function = "I2C9";
-						groups = "I2C9";
-					};
-
-					pinctrl_lpcpd_default: lpcpd_default {
-						function = "LPCPD";
-						groups = "LPCPD";
-					};
-
-					pinctrl_lpcpme_default: lpcpme_default {
-						function = "LPCPME";
-						groups = "LPCPME";
-					};
-
-					pinctrl_lpcrst_default: lpcrst_default {
-						function = "LPCRST";
-						groups = "LPCRST";
-					};
-
-					pinctrl_lpcsmi_default: lpcsmi_default {
-						function = "LPCSMI";
-						groups = "LPCSMI";
-					};
-
-					pinctrl_mac1link_default: mac1link_default {
-						function = "MAC1LINK";
-						groups = "MAC1LINK";
-					};
-
-					pinctrl_mac2link_default: mac2link_default {
-						function = "MAC2LINK";
-						groups = "MAC2LINK";
-					};
-
-					pinctrl_mdio1_default: mdio1_default {
-						function = "MDIO1";
-						groups = "MDIO1";
-					};
-
-					pinctrl_mdio2_default: mdio2_default {
-						function = "MDIO2";
-						groups = "MDIO2";
-					};
-
-					pinctrl_ncts1_default: ncts1_default {
-						function = "NCTS1";
-						groups = "NCTS1";
-					};
-
-					pinctrl_ncts2_default: ncts2_default {
-						function = "NCTS2";
-						groups = "NCTS2";
-					};
-
-					pinctrl_ncts3_default: ncts3_default {
-						function = "NCTS3";
-						groups = "NCTS3";
-					};
-
-					pinctrl_ncts4_default: ncts4_default {
-						function = "NCTS4";
-						groups = "NCTS4";
-					};
-
-					pinctrl_ndcd1_default: ndcd1_default {
-						function = "NDCD1";
-						groups = "NDCD1";
-					};
-
-					pinctrl_ndcd2_default: ndcd2_default {
-						function = "NDCD2";
-						groups = "NDCD2";
-					};
-
-					pinctrl_ndcd3_default: ndcd3_default {
-						function = "NDCD3";
-						groups = "NDCD3";
-					};
-
-					pinctrl_ndcd4_default: ndcd4_default {
-						function = "NDCD4";
-						groups = "NDCD4";
-					};
-
-					pinctrl_ndsr1_default: ndsr1_default {
-						function = "NDSR1";
-						groups = "NDSR1";
-					};
-
-					pinctrl_ndsr2_default: ndsr2_default {
-						function = "NDSR2";
-						groups = "NDSR2";
-					};
-
-					pinctrl_ndsr3_default: ndsr3_default {
-						function = "NDSR3";
-						groups = "NDSR3";
-					};
-
-					pinctrl_ndsr4_default: ndsr4_default {
-						function = "NDSR4";
-						groups = "NDSR4";
-					};
-
-					pinctrl_ndtr1_default: ndtr1_default {
-						function = "NDTR1";
-						groups = "NDTR1";
-					};
-
-					pinctrl_ndtr2_default: ndtr2_default {
-						function = "NDTR2";
-						groups = "NDTR2";
-					};
-
-					pinctrl_ndtr3_default: ndtr3_default {
-						function = "NDTR3";
-						groups = "NDTR3";
-					};
-
-					pinctrl_ndtr4_default: ndtr4_default {
-						function = "NDTR4";
-						groups = "NDTR4";
-					};
-
-					pinctrl_ndts4_default: ndts4_default {
-						function = "NDTS4";
-						groups = "NDTS4";
-					};
-
-					pinctrl_nri1_default: nri1_default {
-						function = "NRI1";
-						groups = "NRI1";
-					};
-
-					pinctrl_nri2_default: nri2_default {
-						function = "NRI2";
-						groups = "NRI2";
-					};
-
-					pinctrl_nri3_default: nri3_default {
-						function = "NRI3";
-						groups = "NRI3";
-					};
-
-					pinctrl_nri4_default: nri4_default {
-						function = "NRI4";
-						groups = "NRI4";
-					};
-
-					pinctrl_nrts1_default: nrts1_default {
-						function = "NRTS1";
-						groups = "NRTS1";
-					};
-
-					pinctrl_nrts2_default: nrts2_default {
-						function = "NRTS2";
-						groups = "NRTS2";
-					};
-
-					pinctrl_nrts3_default: nrts3_default {
-						function = "NRTS3";
-						groups = "NRTS3";
-					};
-
-					pinctrl_oscclk_default: oscclk_default {
-						function = "OSCCLK";
-						groups = "OSCCLK";
-					};
-
-					pinctrl_pwm0_default: pwm0_default {
-						function = "PWM0";
-						groups = "PWM0";
-					};
-
-					pinctrl_pwm1_default: pwm1_default {
-						function = "PWM1";
-						groups = "PWM1";
-					};
-
-					pinctrl_pwm2_default: pwm2_default {
-						function = "PWM2";
-						groups = "PWM2";
-					};
-
-					pinctrl_pwm3_default: pwm3_default {
-						function = "PWM3";
-						groups = "PWM3";
-					};
-
-					pinctrl_pwm4_default: pwm4_default {
-						function = "PWM4";
-						groups = "PWM4";
-					};
-
-					pinctrl_pwm5_default: pwm5_default {
-						function = "PWM5";
-						groups = "PWM5";
-					};
-
-					pinctrl_pwm6_default: pwm6_default {
-						function = "PWM6";
-						groups = "PWM6";
-					};
-
-					pinctrl_pwm7_default: pwm7_default {
-						function = "PWM7";
-						groups = "PWM7";
-					};
-
-					pinctrl_rgmii1_default: rgmii1_default {
-						function = "RGMII1";
-						groups = "RGMII1";
-					};
-
-					pinctrl_rgmii2_default: rgmii2_default {
-						function = "RGMII2";
-						groups = "RGMII2";
-					};
-
-					pinctrl_rmii1_default: rmii1_default {
-						function = "RMII1";
-						groups = "RMII1";
-					};
-
-					pinctrl_rmii2_default: rmii2_default {
-						function = "RMII2";
-						groups = "RMII2";
-					};
-
-					pinctrl_rom16_default: rom16_default {
-						function = "ROM16";
-						groups = "ROM16";
-					};
-
-					pinctrl_rom8_default: rom8_default {
-						function = "ROM8";
-						groups = "ROM8";
-					};
-
-					pinctrl_romcs1_default: romcs1_default {
-						function = "ROMCS1";
-						groups = "ROMCS1";
-					};
-
-					pinctrl_romcs2_default: romcs2_default {
-						function = "ROMCS2";
-						groups = "ROMCS2";
-					};
-
-					pinctrl_romcs3_default: romcs3_default {
-						function = "ROMCS3";
-						groups = "ROMCS3";
-					};
-
-					pinctrl_romcs4_default: romcs4_default {
-						function = "ROMCS4";
-						groups = "ROMCS4";
-					};
-
-					pinctrl_rxd1_default: rxd1_default {
-						function = "RXD1";
-						groups = "RXD1";
-					};
-
-					pinctrl_rxd2_default: rxd2_default {
-						function = "RXD2";
-						groups = "RXD2";
-					};
-
-					pinctrl_rxd3_default: rxd3_default {
-						function = "RXD3";
-						groups = "RXD3";
-					};
-
-					pinctrl_rxd4_default: rxd4_default {
-						function = "RXD4";
-						groups = "RXD4";
-					};
-
-					pinctrl_salt1_default: salt1_default {
-						function = "SALT1";
-						groups = "SALT1";
-					};
-
-					pinctrl_salt2_default: salt2_default {
-						function = "SALT2";
-						groups = "SALT2";
-					};
-
-					pinctrl_salt3_default: salt3_default {
-						function = "SALT3";
-						groups = "SALT3";
-					};
-
-					pinctrl_salt4_default: salt4_default {
-						function = "SALT4";
-						groups = "SALT4";
-					};
-
-					pinctrl_sd1_default: sd1_default {
-						function = "SD1";
-						groups = "SD1";
-					};
-
-					pinctrl_sd2_default: sd2_default {
-						function = "SD2";
-						groups = "SD2";
-					};
-
-					pinctrl_sgpmck_default: sgpmck_default {
-						function = "SGPMCK";
-						groups = "SGPMCK";
-					};
-
-					pinctrl_sgpmi_default: sgpmi_default {
-						function = "SGPMI";
-						groups = "SGPMI";
-					};
-
-					pinctrl_sgpmld_default: sgpmld_default {
-						function = "SGPMLD";
-						groups = "SGPMLD";
-					};
-
-					pinctrl_sgpmo_default: sgpmo_default {
-						function = "SGPMO";
-						groups = "SGPMO";
-					};
-
-					pinctrl_sgpsck_default: sgpsck_default {
-						function = "SGPSCK";
-						groups = "SGPSCK";
-					};
-
-					pinctrl_sgpsi0_default: sgpsi0_default {
-						function = "SGPSI0";
-						groups = "SGPSI0";
-					};
-
-					pinctrl_sgpsi1_default: sgpsi1_default {
-						function = "SGPSI1";
-						groups = "SGPSI1";
-					};
-
-					pinctrl_sgpsld_default: sgpsld_default {
-						function = "SGPSLD";
-						groups = "SGPSLD";
-					};
-
-					pinctrl_sioonctrl_default: sioonctrl_default {
-						function = "SIOONCTRL";
-						groups = "SIOONCTRL";
-					};
-
-					pinctrl_siopbi_default: siopbi_default {
-						function = "SIOPBI";
-						groups = "SIOPBI";
-					};
-
-					pinctrl_siopbo_default: siopbo_default {
-						function = "SIOPBO";
-						groups = "SIOPBO";
-					};
-
-					pinctrl_siopwreq_default: siopwreq_default {
-						function = "SIOPWREQ";
-						groups = "SIOPWREQ";
-					};
-
-					pinctrl_siopwrgd_default: siopwrgd_default {
-						function = "SIOPWRGD";
-						groups = "SIOPWRGD";
-					};
-
-					pinctrl_sios3_default: sios3_default {
-						function = "SIOS3";
-						groups = "SIOS3";
-					};
-
-					pinctrl_sios5_default: sios5_default {
-						function = "SIOS5";
-						groups = "SIOS5";
-					};
-
-					pinctrl_siosci_default: siosci_default {
-						function = "SIOSCI";
-						groups = "SIOSCI";
-					};
-
-					pinctrl_spi1_default: spi1_default {
-						function = "SPI1";
-						groups = "SPI1";
-					};
-
-					pinctrl_spi1debug_default: spi1debug_default {
-						function = "SPI1DEBUG";
-						groups = "SPI1DEBUG";
-					};
-
-					pinctrl_spi1passthru_default: spi1passthru_default {
-						function = "SPI1PASSTHRU";
-						groups = "SPI1PASSTHRU";
-					};
-
-					pinctrl_spics1_default: spics1_default {
-						function = "SPICS1";
-						groups = "SPICS1";
-					};
-
-					pinctrl_timer3_default: timer3_default {
-						function = "TIMER3";
-						groups = "TIMER3";
-					};
-
-					pinctrl_timer4_default: timer4_default {
-						function = "TIMER4";
-						groups = "TIMER4";
-					};
-
-					pinctrl_timer5_default: timer5_default {
-						function = "TIMER5";
-						groups = "TIMER5";
-					};
-
-					pinctrl_timer6_default: timer6_default {
-						function = "TIMER6";
-						groups = "TIMER6";
-					};
-
-					pinctrl_timer7_default: timer7_default {
-						function = "TIMER7";
-						groups = "TIMER7";
-					};
-
-					pinctrl_timer8_default: timer8_default {
-						function = "TIMER8";
-						groups = "TIMER8";
-					};
-
-					pinctrl_txd1_default: txd1_default {
-						function = "TXD1";
-						groups = "TXD1";
-					};
-
-					pinctrl_txd2_default: txd2_default {
-						function = "TXD2";
-						groups = "TXD2";
-					};
-
-					pinctrl_txd3_default: txd3_default {
-						function = "TXD3";
-						groups = "TXD3";
-					};
-
-					pinctrl_txd4_default: txd4_default {
-						function = "TXD4";
-						groups = "TXD4";
-					};
-
-					pinctrl_uart6_default: uart6_default {
-						function = "UART6";
-						groups = "UART6";
-					};
-
-					pinctrl_usbcki_default: usbcki_default {
-						function = "USBCKI";
-						groups = "USBCKI";
-					};
-
-					pinctrl_vgabios_rom_default: vgabios_rom_default {
-						function = "VGABIOS_ROM";
-						groups = "VGABIOS_ROM";
-					};
-
-					pinctrl_vgahs_default: vgahs_default {
-						function = "VGAHS";
-						groups = "VGAHS";
-					};
-
-					pinctrl_vgavs_default: vgavs_default {
-						function = "VGAVS";
-						groups = "VGAVS";
-					};
-
-					pinctrl_vpi18_default: vpi18_default {
-						function = "VPI18";
-						groups = "VPI18";
-					};
-
-					pinctrl_vpi24_default: vpi24_default {
-						function = "VPI24";
-						groups = "VPI24";
-					};
-
-					pinctrl_vpi30_default: vpi30_default {
-						function = "VPI30";
-						groups = "VPI30";
-					};
-
-					pinctrl_vpo12_default: vpo12_default {
-						function = "VPO12";
-						groups = "VPO12";
-					};
-
-					pinctrl_vpo24_default: vpo24_default {
-						function = "VPO24";
-						groups = "VPO24";
-					};
-
-					pinctrl_wdtrst1_default: wdtrst1_default {
-						function = "WDTRST1";
-						groups = "WDTRST1";
-					};
-
-					pinctrl_wdtrst2_default: wdtrst2_default {
-						function = "WDTRST2";
-						groups = "WDTRST2";
-					};
-
-				};
-			};
-
-			sram@1e720000 {
-				compatible = "mmio-sram";
-				reg = <0x1e720000 0x8000>;	// 32K
-			};
-
-			gpio: gpio@1e780000 {
-				#gpio-cells = <2>;
-				gpio-controller;
-				compatible = "aspeed,ast2400-gpio";
-				reg = <0x1e780000 0x1000>;
-				interrupts = <20>;
-				gpio-ranges = <&pinctrl 0 0 220>;
-				interrupt-controller;
-			};
-
-			timer: timer@1e782000 {
-				/* This timer is a Faraday FTTMR010 derivative */
-				compatible = "aspeed,ast2400-timer";
-				reg = <0x1e782000 0x90>;
-				interrupts = <16 17 18 35 36 37 38 39>;
-				clocks = <&clk_apb>;
-				clock-names = "PCLK";
-			};
-
-			wdt1: wdt@1e785000 {
-				compatible = "aspeed,ast2400-wdt";
-				reg = <0x1e785000 0x1c>;
-				interrupts = <27>;
-			};
-
-			wdt2: wdt@1e785020 {
-				compatible = "aspeed,ast2400-wdt";
-				reg = <0x1e785020 0x1c>;
-				interrupts = <27>;
-				clocks = <&clk_apb>;
-				status = "disabled";
-			};
-
-			uart1: serial@1e783000 {
-				compatible = "ns16550a";
-				reg = <0x1e783000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <9>;
-				clocks = <&clk_uart>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			uart2: serial@1e78d000 {
-				compatible = "ns16550a";
-				reg = <0x1e78d000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <32>;
-				clocks = <&clk_uart>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			uart3: serial@1e78e000 {
-				compatible = "ns16550a";
-				reg = <0x1e78e000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <33>;
-				clocks = <&clk_uart>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			uart4: serial@1e78f000 {
-				compatible = "ns16550a";
-				reg = <0x1e78f000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <34>;
-				clocks = <&clk_uart>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			uart5: serial@1e784000 {
-				compatible = "ns16550a";
-				reg = <0x1e784000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <10>;
-				clocks = <&clk_uart>;
-				current-speed = <38400>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			uart6: serial@1e787000 {
-				compatible = "ns16550a";
-				reg = <0x1e787000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <10>;
-				clocks = <&clk_uart>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			adc: adc@1e6e9000 {
-				compatible = "aspeed,ast2400-adc";
-				reg = <0x1e6e9000 0xb0>;
-				clocks = <&clk_apb>;
-				#io-channel-cells = <1>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
deleted file mode 100644
index 9cffe347b828..000000000000
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ /dev/null
@@ -1,1124 +0,0 @@
-#include "skeleton.dtsi"
-
-/ {
-	model = "Aspeed BMC";
-	compatible = "aspeed,ast2500";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&vic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm1176jzf-s";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		fmc: flash-controller@1e620000 {
-			reg = < 0x1e620000 0xc4
-				0x20000000 0x10000000 >;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "aspeed,ast2500-fmc";
-			status = "disabled";
-			interrupts = <19>;
-			flash@0 {
-				reg = < 0 >;
-				compatible = "jedec,spi-nor";
-				status = "disabled";
-			};
-			flash@1 {
-				reg = < 1 >;
-				compatible = "jedec,spi-nor";
-				status = "disabled";
-			};
-			flash@2 {
-				reg = < 2 >;
-				compatible = "jedec,spi-nor";
-				status = "disabled";
-			};
-		};
-
-		spi1: flash-controller@1e630000 {
-			reg = < 0x1e630000 0xc4
-				0x30000000 0x08000000 >;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "aspeed,ast2500-spi";
-			status = "disabled";
-			flash@0 {
-				reg = < 0 >;
-				compatible = "jedec,spi-nor";
-				status = "disabled";
-			};
-			flash@1 {
-				reg = < 1 >;
-				compatible = "jedec,spi-nor";
-				status = "disabled";
-			};
-		};
-
-		spi2: flash-controller@1e631000 {
-			reg = < 0x1e631000 0xc4
-				0x38000000 0x08000000 >;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "aspeed,ast2500-spi";
-			status = "disabled";
-			flash@0 {
-				reg = < 0 >;
-				compatible = "jedec,spi-nor";
-				status = "disabled";
-			};
-			flash@1 {
-				reg = < 1 >;
-				compatible = "jedec,spi-nor";
-				status = "disabled";
-			};
-		};
-
-		vic: interrupt-controller@1e6c0080 {
-			compatible = "aspeed,ast2400-vic";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			valid-sources = <0xfefff7ff 0x0807ffff>;
-			reg = <0x1e6c0080 0x80>;
-		};
-
-		mac0: ethernet@1e660000 {
-			compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
-			reg = <0x1e660000 0x180>;
-			interrupts = <2>;
-			status = "disabled";
-		};
-
-		mac1: ethernet@1e680000 {
-			compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
-			reg = <0x1e680000 0x180>;
-			interrupts = <3>;
-			status = "disabled";
-		};
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon: syscon@1e6e2000 {
-				compatible = "aspeed,g5-scu", "syscon", "simple-mfd";
-				reg = <0x1e6e2000 0x1a8>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				clk_clkin: clk_clkin@70 {
-					#clock-cells = <0>;
-					compatible = "aspeed,g5-clkin-clock", "fixed-clock";
-					reg = <0x70>;
-					clock-frequency = <24000000>;
-				};
-
-				clk_hpll: clk_hpll@24 {
-					#clock-cells = <0>;
-					compatible = "aspeed,g5-hpll-clock", "fixed-clock";
-					reg = <0x24>;
-					clocks = <&clk_clkin>;
-					clock-frequency = <792000000>;
-				};
-
-				clk_ahb: clk_ahb@70 {
-					#clock-cells = <0>;
-					compatible = "aspeed,g5-ahb-clock", "fixed-clock";
-					reg = <0x70>;
-					clocks = <&clk_hpll>;
-					clock-frequency = <198000000>;
-				};
-
-				clk_apb: clk_apb@08 {
-					#clock-cells = <0>;
-					compatible = "aspeed,g5-apb-clock", "fixed-clock";
-					reg = <0x08>;
-					clocks = <&clk_hpll>;
-					clock-frequency = <24750000>;
-				};
-
-				clk_uart: clk_uart@2c {
-					#clock-cells = <0>;
-					compatible = "aspeed,uart-clock", "fixed-clock";
-					reg = <0x2c>;
-					clock-frequency = <24000000>;
-				};
-
-				pinctrl: pinctrl {
-					compatible = "aspeed,g5-pinctrl";
-					aspeed,external-nodes = <&gfx &lhc>;
-
-					pinctrl_acpi_default: acpi_default {
-						function = "ACPI";
-						groups = "ACPI";
-					};
-
-					pinctrl_adc0_default: adc0_default {
-						function = "ADC0";
-						groups = "ADC0";
-					};
-
-					pinctrl_adc1_default: adc1_default {
-						function = "ADC1";
-						groups = "ADC1";
-					};
-
-					pinctrl_adc10_default: adc10_default {
-						function = "ADC10";
-						groups = "ADC10";
-					};
-
-					pinctrl_adc11_default: adc11_default {
-						function = "ADC11";
-						groups = "ADC11";
-					};
-
-					pinctrl_adc12_default: adc12_default {
-						function = "ADC12";
-						groups = "ADC12";
-					};
-
-					pinctrl_adc13_default: adc13_default {
-						function = "ADC13";
-						groups = "ADC13";
-					};
-
-					pinctrl_adc14_default: adc14_default {
-						function = "ADC14";
-						groups = "ADC14";
-					};
-
-					pinctrl_adc15_default: adc15_default {
-						function = "ADC15";
-						groups = "ADC15";
-					};
-
-					pinctrl_adc2_default: adc2_default {
-						function = "ADC2";
-						groups = "ADC2";
-					};
-
-					pinctrl_adc3_default: adc3_default {
-						function = "ADC3";
-						groups = "ADC3";
-					};
-
-					pinctrl_adc4_default: adc4_default {
-						function = "ADC4";
-						groups = "ADC4";
-					};
-
-					pinctrl_adc5_default: adc5_default {
-						function = "ADC5";
-						groups = "ADC5";
-					};
-
-					pinctrl_adc6_default: adc6_default {
-						function = "ADC6";
-						groups = "ADC6";
-					};
-
-					pinctrl_adc7_default: adc7_default {
-						function = "ADC7";
-						groups = "ADC7";
-					};
-
-					pinctrl_adc8_default: adc8_default {
-						function = "ADC8";
-						groups = "ADC8";
-					};
-
-					pinctrl_adc9_default: adc9_default {
-						function = "ADC9";
-						groups = "ADC9";
-					};
-
-					pinctrl_bmcint_default: bmcint_default {
-						function = "BMCINT";
-						groups = "BMCINT";
-					};
-
-					pinctrl_ddcclk_default: ddcclk_default {
-						function = "DDCCLK";
-						groups = "DDCCLK";
-					};
-
-					pinctrl_ddcdat_default: ddcdat_default {
-						function = "DDCDAT";
-						groups = "DDCDAT";
-					};
-
-					pinctrl_espi_default: espi_default {
-						function = "ESPI";
-						groups = "ESPI";
-					};
-
-					pinctrl_fwspics1_default: fwspics1_default {
-						function = "FWSPICS1";
-						groups = "FWSPICS1";
-					};
-
-					pinctrl_fwspics2_default: fwspics2_default {
-						function = "FWSPICS2";
-						groups = "FWSPICS2";
-					};
-
-					pinctrl_gpid0_default: gpid0_default {
-						function = "GPID0";
-						groups = "GPID0";
-					};
-
-					pinctrl_gpid2_default: gpid2_default {
-						function = "GPID2";
-						groups = "GPID2";
-					};
-
-					pinctrl_gpid4_default: gpid4_default {
-						function = "GPID4";
-						groups = "GPID4";
-					};
-
-					pinctrl_gpid6_default: gpid6_default {
-						function = "GPID6";
-						groups = "GPID6";
-					};
-
-					pinctrl_gpie0_default: gpie0_default {
-						function = "GPIE0";
-						groups = "GPIE0";
-					};
-
-					pinctrl_gpie2_default: gpie2_default {
-						function = "GPIE2";
-						groups = "GPIE2";
-					};
-
-					pinctrl_gpie4_default: gpie4_default {
-						function = "GPIE4";
-						groups = "GPIE4";
-					};
-
-					pinctrl_gpie6_default: gpie6_default {
-						function = "GPIE6";
-						groups = "GPIE6";
-					};
-
-					pinctrl_i2c10_default: i2c10_default {
-						function = "I2C10";
-						groups = "I2C10";
-					};
-
-					pinctrl_i2c11_default: i2c11_default {
-						function = "I2C11";
-						groups = "I2C11";
-					};
-
-					pinctrl_i2c12_default: i2c12_default {
-						function = "I2C12";
-						groups = "I2C12";
-					};
-
-					pinctrl_i2c13_default: i2c13_default {
-						function = "I2C13";
-						groups = "I2C13";
-					};
-
-					pinctrl_i2c14_default: i2c14_default {
-						function = "I2C14";
-						groups = "I2C14";
-					};
-
-					pinctrl_i2c3_default: i2c3_default {
-						function = "I2C3";
-						groups = "I2C3";
-					};
-
-					pinctrl_i2c4_default: i2c4_default {
-						function = "I2C4";
-						groups = "I2C4";
-					};
-
-					pinctrl_i2c5_default: i2c5_default {
-						function = "I2C5";
-						groups = "I2C5";
-					};
-
-					pinctrl_i2c6_default: i2c6_default {
-						function = "I2C6";
-						groups = "I2C6";
-					};
-
-					pinctrl_i2c7_default: i2c7_default {
-						function = "I2C7";
-						groups = "I2C7";
-					};
-
-					pinctrl_i2c8_default: i2c8_default {
-						function = "I2C8";
-						groups = "I2C8";
-					};
-
-					pinctrl_i2c9_default: i2c9_default {
-						function = "I2C9";
-						groups = "I2C9";
-					};
-
-					pinctrl_lad0_default: lad0_default {
-						function = "LAD0";
-						groups = "LAD0";
-					};
-					pinctrl_lad1_default: lad1_default {
-						function = "LAD1";
-						groups = "LAD1";
-					};
-
-					pinctrl_lad2_default: lad2_default {
-						function = "LAD2";
-						groups = "LAD2";
-					};
-
-					pinctrl_lad3_default: lad3_default {
-						function = "LAD3";
-						groups = "LAD3";
-					};
-
-					pinctrl_lclk_default: lclk_default {
-						function = "LCLK";
-						groups = "LCLK";
-					};
-
-					pinctrl_lframe_default: lframe_default {
-						function = "LFRAME";
-						groups = "LFRAME";
-					};
-
-					pinctrl_lpchc_default: lpchc_default {
-						function = "LPCHC";
-						groups = "LPCHC";
-					};
-
-					pinctrl_lpcpd_default: lpcpd_default {
-						function = "LPCPD";
-						groups = "LPCPD";
-					};
-
-					pinctrl_lpcplus_default: lpcplus_default {
-						function = "LPCPLUS";
-						groups = "LPCPLUS";
-					};
-
-					pinctrl_lpcpme_default: lpcpme_default {
-						function = "LPCPME";
-						groups = "LPCPME";
-					};
-
-					pinctrl_lpcrst_default: lpcrst_default {
-						function = "LPCRST";
-						groups = "LPCRST";
-					};
-
-					pinctrl_lpcsmi_default: lpcsmi_default {
-						function = "LPCSMI";
-						groups = "LPCSMI";
-					};
-
-					pinctrl_lsirq_default: lsirq_default {
-						function = "LSIRQ";
-						groups = "LSIRQ";
-					};
-
-					pinctrl_mac1link_default: mac1link_default {
-						function = "MAC1LINK";
-						groups = "MAC1LINK";
-					};
-
-					pinctrl_mac2link_default: mac2link_default {
-						function = "MAC2LINK";
-						groups = "MAC2LINK";
-					};
-
-					pinctrl_mdio1_default: mdio1_default {
-						function = "MDIO1";
-						groups = "MDIO1";
-					};
-
-					pinctrl_mdio2_default: mdio2_default {
-						function = "MDIO2";
-						groups = "MDIO2";
-					};
-
-					pinctrl_ncts1_default: ncts1_default {
-						function = "NCTS1";
-						groups = "NCTS1";
-					};
-
-					pinctrl_ncts2_default: ncts2_default {
-						function = "NCTS2";
-						groups = "NCTS2";
-					};
-
-					pinctrl_ncts3_default: ncts3_default {
-						function = "NCTS3";
-						groups = "NCTS3";
-					};
-
-					pinctrl_ncts4_default: ncts4_default {
-						function = "NCTS4";
-						groups = "NCTS4";
-					};
-
-					pinctrl_ndcd1_default: ndcd1_default {
-						function = "NDCD1";
-						groups = "NDCD1";
-					};
-
-					pinctrl_ndcd2_default: ndcd2_default {
-						function = "NDCD2";
-						groups = "NDCD2";
-					};
-
-					pinctrl_ndcd3_default: ndcd3_default {
-						function = "NDCD3";
-						groups = "NDCD3";
-					};
-
-					pinctrl_ndcd4_default: ndcd4_default {
-						function = "NDCD4";
-						groups = "NDCD4";
-					};
-
-					pinctrl_ndsr1_default: ndsr1_default {
-						function = "NDSR1";
-						groups = "NDSR1";
-					};
-
-					pinctrl_ndsr2_default: ndsr2_default {
-						function = "NDSR2";
-						groups = "NDSR2";
-					};
-
-					pinctrl_ndsr3_default: ndsr3_default {
-						function = "NDSR3";
-						groups = "NDSR3";
-					};
-
-					pinctrl_ndsr4_default: ndsr4_default {
-						function = "NDSR4";
-						groups = "NDSR4";
-					};
-
-					pinctrl_ndtr1_default: ndtr1_default {
-						function = "NDTR1";
-						groups = "NDTR1";
-					};
-
-					pinctrl_ndtr2_default: ndtr2_default {
-						function = "NDTR2";
-						groups = "NDTR2";
-					};
-
-					pinctrl_ndtr3_default: ndtr3_default {
-						function = "NDTR3";
-						groups = "NDTR3";
-					};
-
-					pinctrl_ndtr4_default: ndtr4_default {
-						function = "NDTR4";
-						groups = "NDTR4";
-					};
-
-					pinctrl_nri1_default: nri1_default {
-						function = "NRI1";
-						groups = "NRI1";
-					};
-
-					pinctrl_nri2_default: nri2_default {
-						function = "NRI2";
-						groups = "NRI2";
-					};
-
-					pinctrl_nri3_default: nri3_default {
-						function = "NRI3";
-						groups = "NRI3";
-					};
-
-					pinctrl_nri4_default: nri4_default {
-						function = "NRI4";
-						groups = "NRI4";
-					};
-
-					pinctrl_nrts1_default: nrts1_default {
-						function = "NRTS1";
-						groups = "NRTS1";
-					};
-
-					pinctrl_nrts2_default: nrts2_default {
-						function = "NRTS2";
-						groups = "NRTS2";
-					};
-
-					pinctrl_nrts3_default: nrts3_default {
-						function = "NRTS3";
-						groups = "NRTS3";
-					};
-
-					pinctrl_nrts4_default: nrts4_default {
-						function = "NRTS4";
-						groups = "NRTS4";
-					};
-
-					pinctrl_oscclk_default: oscclk_default {
-						function = "OSCCLK";
-						groups = "OSCCLK";
-					};
-
-					pinctrl_pewake_default: pewake_default {
-						function = "PEWAKE";
-						groups = "PEWAKE";
-					};
-
-					pinctrl_pnor_default: pnor_default {
-						function = "PNOR";
-						groups = "PNOR";
-					};
-
-					pinctrl_pwm0_default: pwm0_default {
-						function = "PWM0";
-						groups = "PWM0";
-					};
-
-					pinctrl_pwm1_default: pwm1_default {
-						function = "PWM1";
-						groups = "PWM1";
-					};
-
-					pinctrl_pwm2_default: pwm2_default {
-						function = "PWM2";
-						groups = "PWM2";
-					};
-
-					pinctrl_pwm3_default: pwm3_default {
-						function = "PWM3";
-						groups = "PWM3";
-					};
-
-					pinctrl_pwm4_default: pwm4_default {
-						function = "PWM4";
-						groups = "PWM4";
-					};
-
-					pinctrl_pwm5_default: pwm5_default {
-						function = "PWM5";
-						groups = "PWM5";
-					};
-
-					pinctrl_pwm6_default: pwm6_default {
-						function = "PWM6";
-						groups = "PWM6";
-					};
-
-					pinctrl_pwm7_default: pwm7_default {
-						function = "PWM7";
-						groups = "PWM7";
-					};
-
-					pinctrl_rgmii1_default: rgmii1_default {
-						function = "RGMII1";
-						groups = "RGMII1";
-					};
-
-					pinctrl_rgmii2_default: rgmii2_default {
-						function = "RGMII2";
-						groups = "RGMII2";
-					};
-
-					pinctrl_rmii1_default: rmii1_default {
-						function = "RMII1";
-						groups = "RMII1";
-					};
-
-					pinctrl_rmii2_default: rmii2_default {
-						function = "RMII2";
-						groups = "RMII2";
-					};
-
-					pinctrl_rxd1_default: rxd1_default {
-						function = "RXD1";
-						groups = "RXD1";
-					};
-
-					pinctrl_rxd2_default: rxd2_default {
-						function = "RXD2";
-						groups = "RXD2";
-					};
-
-					pinctrl_rxd3_default: rxd3_default {
-						function = "RXD3";
-						groups = "RXD3";
-					};
-
-					pinctrl_rxd4_default: rxd4_default {
-						function = "RXD4";
-						groups = "RXD4";
-					};
-
-					pinctrl_salt1_default: salt1_default {
-						function = "SALT1";
-						groups = "SALT1";
-					};
-
-					pinctrl_salt10_default: salt10_default {
-						function = "SALT10";
-						groups = "SALT10";
-					};
-
-					pinctrl_salt11_default: salt11_default {
-						function = "SALT11";
-						groups = "SALT11";
-					};
-
-					pinctrl_salt12_default: salt12_default {
-						function = "SALT12";
-						groups = "SALT12";
-					};
-
-					pinctrl_salt13_default: salt13_default {
-						function = "SALT13";
-						groups = "SALT13";
-					};
-
-					pinctrl_salt14_default: salt14_default {
-						function = "SALT14";
-						groups = "SALT14";
-					};
-
-					pinctrl_salt2_default: salt2_default {
-						function = "SALT2";
-						groups = "SALT2";
-					};
-
-					pinctrl_salt3_default: salt3_default {
-						function = "SALT3";
-						groups = "SALT3";
-					};
-
-					pinctrl_salt4_default: salt4_default {
-						function = "SALT4";
-						groups = "SALT4";
-					};
-
-					pinctrl_salt5_default: salt5_default {
-						function = "SALT5";
-						groups = "SALT5";
-					};
-
-					pinctrl_salt6_default: salt6_default {
-						function = "SALT6";
-						groups = "SALT6";
-					};
-
-					pinctrl_salt7_default: salt7_default {
-						function = "SALT7";
-						groups = "SALT7";
-					};
-
-					pinctrl_salt8_default: salt8_default {
-						function = "SALT8";
-						groups = "SALT8";
-					};
-
-					pinctrl_salt9_default: salt9_default {
-						function = "SALT9";
-						groups = "SALT9";
-					};
-
-					pinctrl_scl1_default: scl1_default {
-						function = "SCL1";
-						groups = "SCL1";
-					};
-
-					pinctrl_scl2_default: scl2_default {
-						function = "SCL2";
-						groups = "SCL2";
-					};
-
-					pinctrl_sd1_default: sd1_default {
-						function = "SD1";
-						groups = "SD1";
-					};
-
-					pinctrl_sd2_default: sd2_default {
-						function = "SD2";
-						groups = "SD2";
-					};
-
-					pinctrl_sda1_default: sda1_default {
-						function = "SDA1";
-						groups = "SDA1";
-					};
-
-					pinctrl_sda2_default: sda2_default {
-						function = "SDA2";
-						groups = "SDA2";
-					};
-
-					pinctrl_sgps1_default: sgps1_default {
-						function = "SGPS1";
-						groups = "SGPS1";
-					};
-
-					pinctrl_sgps2_default: sgps2_default {
-						function = "SGPS2";
-						groups = "SGPS2";
-					};
-
-					pinctrl_sioonctrl_default: sioonctrl_default {
-						function = "SIOONCTRL";
-						groups = "SIOONCTRL";
-					};
-
-					pinctrl_siopbi_default: siopbi_default {
-						function = "SIOPBI";
-						groups = "SIOPBI";
-					};
-
-					pinctrl_siopbo_default: siopbo_default {
-						function = "SIOPBO";
-						groups = "SIOPBO";
-					};
-
-					pinctrl_siopwreq_default: siopwreq_default {
-						function = "SIOPWREQ";
-						groups = "SIOPWREQ";
-					};
-
-					pinctrl_siopwrgd_default: siopwrgd_default {
-						function = "SIOPWRGD";
-						groups = "SIOPWRGD";
-					};
-
-					pinctrl_sios3_default: sios3_default {
-						function = "SIOS3";
-						groups = "SIOS3";
-					};
-
-					pinctrl_sios5_default: sios5_default {
-						function = "SIOS5";
-						groups = "SIOS5";
-					};
-
-					pinctrl_siosci_default: siosci_default {
-						function = "SIOSCI";
-						groups = "SIOSCI";
-					};
-
-					pinctrl_spi1_default: spi1_default {
-						function = "SPI1";
-						groups = "SPI1";
-					};
-
-					pinctrl_spi1cs1_default: spi1cs1_default {
-						function = "SPI1CS1";
-						groups = "SPI1CS1";
-					};
-
-					pinctrl_spi1debug_default: spi1debug_default {
-						function = "SPI1DEBUG";
-						groups = "SPI1DEBUG";
-					};
-
-					pinctrl_spi1passthru_default: spi1passthru_default {
-						function = "SPI1PASSTHRU";
-						groups = "SPI1PASSTHRU";
-					};
-
-					pinctrl_spi2ck_default: spi2ck_default {
-						function = "SPI2CK";
-						groups = "SPI2CK";
-					};
-
-					pinctrl_spi2cs0_default: spi2cs0_default {
-						function = "SPI2CS0";
-						groups = "SPI2CS0";
-					};
-
-					pinctrl_spi2cs1_default: spi2cs1_default {
-						function = "SPI2CS1";
-						groups = "SPI2CS1";
-					};
-
-					pinctrl_spi2miso_default: spi2miso_default {
-						function = "SPI2MISO";
-						groups = "SPI2MISO";
-					};
-
-					pinctrl_spi2mosi_default: spi2mosi_default {
-						function = "SPI2MOSI";
-						groups = "SPI2MOSI";
-					};
-
-					pinctrl_timer3_default: timer3_default {
-						function = "TIMER3";
-						groups = "TIMER3";
-					};
-
-					pinctrl_timer4_default: timer4_default {
-						function = "TIMER4";
-						groups = "TIMER4";
-					};
-
-					pinctrl_timer5_default: timer5_default {
-						function = "TIMER5";
-						groups = "TIMER5";
-					};
-
-					pinctrl_timer6_default: timer6_default {
-						function = "TIMER6";
-						groups = "TIMER6";
-					};
-
-					pinctrl_timer7_default: timer7_default {
-						function = "TIMER7";
-						groups = "TIMER7";
-					};
-
-					pinctrl_timer8_default: timer8_default {
-						function = "TIMER8";
-						groups = "TIMER8";
-					};
-
-					pinctrl_txd1_default: txd1_default {
-						function = "TXD1";
-						groups = "TXD1";
-					};
-
-					pinctrl_txd2_default: txd2_default {
-						function = "TXD2";
-						groups = "TXD2";
-					};
-
-					pinctrl_txd3_default: txd3_default {
-						function = "TXD3";
-						groups = "TXD3";
-					};
-
-					pinctrl_txd4_default: txd4_default {
-						function = "TXD4";
-						groups = "TXD4";
-					};
-
-					pinctrl_uart6_default: uart6_default {
-						function = "UART6";
-						groups = "UART6";
-					};
-
-					pinctrl_usbcki_default: usbcki_default {
-						function = "USBCKI";
-						groups = "USBCKI";
-					};
-
-					pinctrl_vgabiosrom_default: vgabiosrom_default {
-						function = "VGABIOSROM";
-						groups = "VGABIOSROM";
-					};
-
-					pinctrl_vgahs_default: vgahs_default {
-						function = "VGAHS";
-						groups = "VGAHS";
-					};
-
-					pinctrl_vgavs_default: vgavs_default {
-						function = "VGAVS";
-						groups = "VGAVS";
-					};
-
-					pinctrl_vpi24_default: vpi24_default {
-						function = "VPI24";
-						groups = "VPI24";
-					};
-
-					pinctrl_vpo_default: vpo_default {
-						function = "VPO";
-						groups = "VPO";
-					};
-
-					pinctrl_wdtrst1_default: wdtrst1_default {
-						function = "WDTRST1";
-						groups = "WDTRST1";
-					};
-
-					pinctrl_wdtrst2_default: wdtrst2_default {
-						function = "WDTRST2";
-						groups = "WDTRST2";
-					};
-
-				};
-
-			};
-
-			gfx: display@1e6e6000 {
-				compatible = "aspeed,ast2500-gfx", "syscon";
-				reg = <0x1e6e6000 0x1000>;
-				reg-io-width = <4>;
-			};
-
-			sram@1e720000 {
-				compatible = "mmio-sram";
-				reg = <0x1e720000 0x9000>;	// 36K
-			};
-
-			gpio: gpio@1e780000 {
-				#gpio-cells = <2>;
-				gpio-controller;
-				compatible = "aspeed,ast2500-gpio";
-				reg = <0x1e780000 0x1000>;
-				interrupts = <20>;
-				gpio-ranges = <&pinctrl 0 0 220>;
-				interrupt-controller;
-			};
-
-			timer: timer@1e782000 {
-				/* This timer is a Faraday FTTMR010 derivative */
-				compatible = "aspeed,ast2400-timer";
-				reg = <0x1e782000 0x90>;
-				interrupts = <16 17 18 35 36 37 38 39>;
-				clocks = <&clk_apb>;
-				clock-names = "PCLK";
-			};
-
-
-			wdt1: wdt@1e785000 {
-				compatible = "aspeed,ast2500-wdt";
-				reg = <0x1e785000 0x20>;
-				interrupts = <27>;
-			};
-
-			wdt2: wdt@1e785020 {
-				compatible = "aspeed,ast2500-wdt";
-				reg = <0x1e785020 0x20>;
-				interrupts = <27>;
-				status = "disabled";
-			};
-
-			wdt3: wdt@1e785040 {
-				compatible = "aspeed,ast2500-wdt";
-				reg = <0x1e785040 0x20>;
-				status = "disabled";
-			};
-
-			uart1: serial@1e783000 {
-				compatible = "ns16550a";
-				reg = <0x1e783000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <9>;
-				clocks = <&clk_uart>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			lpc: lpc@1e789000 {
-				compatible = "aspeed,ast2500-lpc", "simple-mfd";
-				reg = <0x1e789000 0x1000>;
-
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x1e789000 0x1000>;
-
-				lpc_bmc: lpc-bmc@0 {
-					compatible = "aspeed,ast2500-lpc-bmc";
-					reg = <0x0 0x80>;
-				};
-
-				lpc_host: lpc-host@80 {
-					compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
-					reg = <0x80 0x1e0>;
-
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x80 0x1e0>;
-
-					reg-io-width = <4>;
-
-					lhc: lhc@20 {
-						compatible = "aspeed,ast2500-lhc";
-						reg = <0x20 0x24 0x48 0x8>;
-					};
-				};
-			};
-
-			uart2: serial@1e78d000 {
-				compatible = "ns16550a";
-				reg = <0x1e78d000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <32>;
-				clocks = <&clk_uart>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			uart3: serial@1e78e000 {
-				compatible = "ns16550a";
-				reg = <0x1e78e000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <33>;
-				clocks = <&clk_uart>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			uart4: serial@1e78f000 {
-				compatible = "ns16550a";
-				reg = <0x1e78f000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <34>;
-				clocks = <&clk_uart>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			uart5: serial@1e784000 {
-				compatible = "ns16550a";
-				reg = <0x1e784000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <10>;
-				clocks = <&clk_uart>;
-				current-speed = <38400>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			uart6: serial@1e787000 {
-				compatible = "ns16550a";
-				reg = <0x1e787000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <10>;
-				clocks = <&clk_uart>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
-			adc: adc@1e6e9000 {
-				compatible = "aspeed,ast2500-adc";
-				reg = <0x1e6e9000 0xb0>;
-				clocks = <&clk_apb>;
-				#io-channel-cells = <1>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
new file mode 100644
index 000000000000..9adf9278dc94
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ASPEED) += \
+	aspeed-ast2500-evb.dtb \
+	aspeed-ast2600-evb-a1.dtb \
+	aspeed-ast2600-evb.dtb \
+	aspeed-bmc-amd-daytonax.dtb \
+	aspeed-bmc-amd-ethanolx.dtb \
+	aspeed-bmc-ampere-mtjade.dtb \
+	aspeed-bmc-ampere-mtjefferson.dtb \
+	aspeed-bmc-ampere-mtmitchell.dtb \
+	aspeed-bmc-arm-stardragon4800-rep2.dtb \
+	aspeed-bmc-asrock-e3c246d4i.dtb \
+	aspeed-bmc-asrock-e3c256d4i.dtb \
+	aspeed-bmc-asrock-romed8hm3.dtb \
+	aspeed-bmc-asrock-spc621d8hm3.dtb \
+	aspeed-bmc-asrock-x570d4u.dtb \
+	aspeed-bmc-asus-x4tf.dtb \
+	aspeed-bmc-bytedance-g220a.dtb \
+	aspeed-bmc-delta-ahe50dc.dtb \
+	aspeed-bmc-facebook-bletchley.dtb \
+	aspeed-bmc-facebook-catalina.dtb \
+	aspeed-bmc-facebook-clemente.dtb \
+	aspeed-bmc-facebook-cmm.dtb \
+	aspeed-bmc-facebook-darwin.dtb \
+	aspeed-bmc-facebook-elbert.dtb \
+	aspeed-bmc-facebook-fuji-data64.dtb \
+	aspeed-bmc-facebook-fuji.dtb \
+	aspeed-bmc-facebook-galaxy100.dtb \
+	aspeed-bmc-facebook-greatlakes.dtb \
+	aspeed-bmc-facebook-harma.dtb \
+	aspeed-bmc-facebook-minerva.dtb \
+	aspeed-bmc-facebook-minipack.dtb \
+	aspeed-bmc-facebook-santabarbara.dtb \
+	aspeed-bmc-facebook-tiogapass.dtb \
+	aspeed-bmc-facebook-wedge40.dtb \
+	aspeed-bmc-facebook-wedge100.dtb \
+	aspeed-bmc-facebook-wedge400-data64.dtb \
+	aspeed-bmc-facebook-wedge400.dtb \
+	aspeed-bmc-facebook-yamp.dtb \
+	aspeed-bmc-facebook-yosemitev2.dtb \
+	aspeed-bmc-facebook-yosemite4.dtb \
+	aspeed-bmc-facebook-yosemite5.dtb \
+	aspeed-bmc-ibm-balcones.dtb \
+	aspeed-bmc-ibm-blueridge.dtb \
+	aspeed-bmc-ibm-bonnell.dtb \
+	aspeed-bmc-ibm-everest.dtb \
+	aspeed-bmc-ibm-fuji.dtb \
+	aspeed-bmc-ibm-rainier.dtb \
+	aspeed-bmc-ibm-rainier-1s4u.dtb \
+	aspeed-bmc-ibm-rainier-4u.dtb \
+	aspeed-bmc-ibm-sbp1.dtb \
+	aspeed-bmc-ibm-system1.dtb \
+	aspeed-bmc-intel-s2600wf.dtb \
+	aspeed-bmc-inspur-fp5280g2.dtb \
+	aspeed-bmc-inspur-nf5280m6.dtb \
+	aspeed-bmc-inspur-on5263m5.dtb \
+	aspeed-bmc-lenovo-hr630.dtb \
+	aspeed-bmc-lenovo-hr855xg2.dtb \
+	aspeed-bmc-microsoft-olympus.dtb \
+	aspeed-bmc-nvidia-gb200nvl-bmc.dtb \
+	aspeed-bmc-opp-lanyang.dtb \
+	aspeed-bmc-opp-mowgli.dtb \
+	aspeed-bmc-opp-nicole.dtb \
+	aspeed-bmc-opp-palmetto.dtb \
+	aspeed-bmc-opp-romulus.dtb \
+	aspeed-bmc-opp-tacoma.dtb \
+	aspeed-bmc-opp-vesnin.dtb \
+	aspeed-bmc-opp-witherspoon.dtb \
+	aspeed-bmc-opp-zaius.dtb \
+	aspeed-bmc-portwell-neptune.dtb \
+	aspeed-bmc-qcom-dc-scm-v1.dtb \
+	aspeed-bmc-quanta-q71l.dtb \
+	aspeed-bmc-quanta-s6q.dtb \
+	aspeed-bmc-supermicro-x11spi.dtb \
+	aspeed-bmc-inventec-starscream.dtb \
+	aspeed-bmc-inventec-transformers.dtb \
+	aspeed-bmc-tyan-s7106.dtb \
+	aspeed-bmc-tyan-s8036.dtb \
+	aspeed-bmc-ufispace-ncplite.dtb \
+	aspeed-bmc-vegman-n110.dtb \
+	aspeed-bmc-vegman-rx20.dtb \
+	aspeed-bmc-vegman-sx20.dtb
diff --git a/arch/arm/boot/dts/aspeed/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed/aspeed-ast2500-evb.dts
new file mode 100644
index 000000000000..a497dd135491
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-ast2500-evb.dts
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+
+/ {
+	model = "AST2500 EVB";
+	compatible = "aspeed,ast2500-evb", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	lm75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd1_default>;
+};
+
+/*
+ * Enable port A as device (via the virtual hub) and port B as
+ * host by default on the eval board. This can be easily changed
+ * by replacing the override below with &ehci0 { ... } to enable
+ * host on both ports.
+ */
+&vhub {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gfx {
+     status = "okay";
+     memory-region = <&gfx_memory>;
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb-a1.dts b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb-a1.dts
new file mode 100644
index 000000000000..f34a2b1ec2f0
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb-a1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2021 IBM Corp.
+
+#include "aspeed-ast2600-evb.dts"
+
+/ {
+	model = "AST2600 A1 EVB";
+	compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600-evb", "aspeed,ast2600";
+
+	/delete-node/regulator-vcc-sdhci0;
+	/delete-node/regulator-vcc-sdhci1;
+	/delete-node/regulator-vccq-sdhci0;
+	/delete-node/regulator-vccq-sdhci1;
+};
+
+/delete-node/ &sdc;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
new file mode 100644
index 000000000000..de83c0eb1d6e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "AST2600 EVB";
+	compatible = "aspeed,ast2600-evb", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	vcc_sdhci0: regulator-vcc-sdhci0 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHCI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 ASPEED_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhci0: regulator-vccq-sdhci0 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHCI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>,
+			 <1800000 0>;
+	};
+
+	vcc_sdhci1: regulator-vcc-sdhci1 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHCI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhci1: regulator-vccq-sdhci1 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHCI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 ASPEED_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>,
+			 <1800000 0>;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio1 {
+	status = "okay";
+
+	ethphy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio2 {
+	status = "okay";
+
+	ethphy2: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&ethphy0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+
+&mac1 {
+	status = "okay";
+
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&ethphy1>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default>;
+};
+
+&mac2 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	non-removable;
+	bus-width = <4>;
+	max-frequency = <100000000>;
+	clk-phase-mmc-hs200 = <9>, <225>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart5 {
+	// Workaround for A0
+	compatible = "snps,dw-apb-uart";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	temp@2e {
+		compatible = "adi,adt7490";
+		reg = <0x2e>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	lm75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&fsim0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&sdc {
+	status = "okay";
+};
+
+/*
+ * The signal voltage of sdhci0 and sdhci1 on AST2600-A2 EVB is able to be
+ * toggled by GPIO pins.
+ * In the reference design, GPIOV0 of AST2600-A2 EVB is connected to the
+ * power load switch that provides 3.3v to sdhci0 vdd, GPIOV1 is connected to
+ * a 1.8v and a 3.3v power load switch that provides signal voltage to
+ * sdhci0 bus.
+ * If GPIOV0 is active high, sdhci0 is enabled, otherwise, sdhci0 is disabled.
+ * If GPIOV1 is active high, 3.3v power load switch is enabled, sdhci0 signal
+ * voltage is 3.3v, otherwise, 1.8v power load switch will be enabled,
+ * sdhci0 signal voltage becomes 1.8v.
+ * AST2600-A2 EVB also supports toggling signal voltage for sdhci1.
+ * The design is the same as sdhci0, it uses GPIOV2 as power-gpio and GPIOV3
+ * as power-switch-gpio.
+ */
+&sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <100000000>;
+	sdhci-drive-type = /bits/ 8 <3>;
+	sdhci-caps-mask = <0x7 0x0>;
+	sdhci,wp-inverted;
+	vmmc-supply = <&vcc_sdhci0>;
+	vqmmc-supply = <&vccq_sdhci0>;
+	clk-phase-sd-hs = <7>, <200>;
+};
+
+&sdhci1 {
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <100000000>;
+	sdhci-drive-type = /bits/ 8 <3>;
+	sdhci-caps-mask = <0x7 0x0>;
+	sdhci,wp-inverted;
+	vmmc-supply = <&vcc_sdhci1>;
+	vqmmc-supply = <&vccq_sdhci1>;
+	clk-phase-sd-hs = <7>, <200>;
+};
+
+&vhub {
+	status = "okay";
+	pinctrl-names = "default";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-daytonax.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-daytonax.dts
new file mode 100644
index 000000000000..64bb9bf92de2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-daytonax.dts
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "AMD DaytonaX BMC";
+	compatible = "amd,daytonax-bmc", "aspeed,ast2500";
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-fault {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		led-identify {
+			gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>,
+			<&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&uart1 {
+	//Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		&pinctrl_rxd1_default
+		&pinctrl_nrts1_default
+		&pinctrl_ndtr1_default
+		&pinctrl_ndsr1_default
+		&pinctrl_ncts1_default
+		&pinctrl_ndcd1_default
+		&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	//BMC Console
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x3f8>;
+	aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default
+		&pinctrl_adc10_default
+		&pinctrl_adc11_default
+		&pinctrl_adc12_default
+		&pinctrl_adc13_default
+		&pinctrl_adc14_default
+		&pinctrl_adc15_default>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"","","led-fault","led-identify","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"id-button","","","","","","","",
+	/*D0-D7*/	"","","ASSERT_BMC_READY","","","","","",
+	/*E0-E7*/	"reset-button","reset-control","power-button","power-control","",
+			"power-good","power-ok","",
+	/*F0-F7*/	"","","","","","","BATTERY_DETECT","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"FM_BMC_READ_SPD_TEMP","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		&pinctrl_pwm1_default
+		&pinctrl_pwm2_default
+		&pinctrl_pwm3_default
+		&pinctrl_pwm4_default
+		&pinctrl_pwm5_default
+		&pinctrl_pwm6_default
+		&pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@10 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@11 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@12 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@13 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@14 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+
+	fan@15 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-ethanolx.dts
new file mode 100644
index 000000000000..6bded774c457
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-ethanolx.dts
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 AMD Inc.
+// Author: Supreeth Venkatesh <supreeth.venkatesh@amd.com>
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "AMD EthanolX BMC";
+	compatible = "amd,ethanolx-bmc", "aspeed,ast2500";
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+	};
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+	leds {
+		compatible = "gpio-leds";
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&uart1 {
+	//Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default
+		     &pinctrl_nrts1_default
+		     &pinctrl_ncts1_default>;
+};
+
+&uart5 {
+	//BMC Console
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		     &pinctrl_adc1_default
+		     &pinctrl_adc2_default
+		     &pinctrl_adc3_default
+		     &pinctrl_adc4_default>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"","","FAULT_LED","CHASSIS_ID_LED","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"CHASSIS_ID_BTN","INTRUDER","AC_LOSS","","","","","",
+	/*D0-D7*/	"HDT_DBREQ","LOCAL_SPI_ROM_SEL","FPGA_SPI_ROM_SEL","JTAG_MUX_S",
+			"JTAG_MUX_OE","HDT_SEL","ASERT_WARM_RST_BTN","FPGA_RSVD",
+	/*E0-E7*/	"","","MON_P0_PWR_BTN","MON_P0_RST_BTN","MON_P0_NMI_BTN",
+			"MON_P0_PWR_GOOD","MON_PWROK","MON_RESET",
+	/*F0-F7*/	"MON_P0_PROCHOT","MON_P1_PROCHOT","MON_P0_THERMTRIP",
+			"MON_P1_THERMTRIP","P0_PRESENT","P1_PRESENT","MON_ATX_PWR_OK","",
+	/*G0-G7*/	"BRD_REV_ID_3","BRD_REV_ID_2","BRD_REV_ID_1","BRD_REV_ID_0",
+			"P0_APML_ALERT","P1_APML_ALERT","FPGA ALERT","",
+	/*H0-H7*/	"BRD_ID_0","BRD_ID_1","BRD_ID_2","BRD_ID_3",
+			"PCIE_DISCONNECTED","USB_DISCONNECTED","SPARE_0","SPARE_1",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"ASSERT_PWR_BTN","ASSERT_RST_BTN","ASSERT_NMI_BTN",
+			"ASSERT_LOCAL_LOCK","ASSERT_P0_PROCHOT","ASSERT_P1_PROCHOT",
+			"ASSERT_CLR_CMOS","ASSERT_BMC_READY",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"P0_VDD_CORE_RUN_VRHOT","P0_VDD_SOC_RUN_VRHOT",
+			"P0_VDD_MEM_ABCD_SUS_VRHOT","P0_VDD_MEM_EFGH_SUS_VRHOT",
+			"P1_VDD_CORE_RUN_VRHOT","P1_VDD_SOC_RUN_VRHOT",
+			"P1_VDD_MEM_ABCD_SUS_VRHOT","P1_VDD_MEM_EFGH_SUS_VRHOT",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","SENSOR THERM","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+//APML for P0
+&i2c0 {
+	status = "okay";
+};
+
+//APML for P1
+&i2c1 {
+	status = "okay";
+};
+
+//FPGA
+&i2c2 {
+	status = "okay";
+};
+
+//24LC128 EEPROM
+&i2c3 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+//P0 Power regulators
+&i2c4 {
+	status = "okay";
+};
+
+//P1 Power regulators
+&i2c5 {
+	status = "okay";
+};
+
+//P0/P1 Thermal diode
+&i2c6 {
+	status = "okay";
+};
+
+// Thermal Sensors
+&i2c7 {
+	status = "okay";
+
+	lm75a@48 {
+		compatible = "national,lm75a";
+		reg = <0x48>;
+	};
+
+	lm75a@49 {
+		compatible = "national,lm75a";
+		reg = <0x49>;
+	};
+
+	lm75a@4a {
+		compatible = "national,lm75a";
+		reg = <0x4a>;
+	};
+
+	lm75a@4b {
+		compatible = "national,lm75a";
+		reg = <0x4b>;
+	};
+
+	lm75a@4c {
+		compatible = "national,lm75a";
+		reg = <0x4c>;
+	};
+
+	lm75a@4d {
+		compatible = "national,lm75a";
+		reg = <0x4d>;
+	};
+
+	lm75a@4e {
+		compatible = "national,lm75a";
+		reg = <0x4e>;
+	};
+
+	lm75a@4f {
+		compatible = "national,lm75a";
+		reg = <0x4f>;
+	};
+};
+
+//BMC I2C
+&i2c8 {
+	status = "okay";
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x60>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x62>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA2>;
+};
+
+&kcs4 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x97DE>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&lpc_ctrl {
+	//Enable lpc clock
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x3f8>;
+	aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+	&pinctrl_pwm1_default
+	&pinctrl_pwm2_default
+	&pinctrl_pwm3_default
+	&pinctrl_pwm4_default
+	&pinctrl_pwm5_default
+	&pinctrl_pwm6_default
+	&pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts
new file mode 100644
index 000000000000..263702599767
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts
@@ -0,0 +1,834 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ampere Mt. Jade BMC";
+	compatible = "ampere,mtjade-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 *  i2c bus 50-57 assigned to NVMe slot 0-7
+		 */
+		i2c50 = &nvmeslot_0;
+		i2c51 = &nvmeslot_1;
+		i2c52 = &nvmeslot_2;
+		i2c53 = &nvmeslot_3;
+		i2c54 = &nvmeslot_4;
+		i2c55 = &nvmeslot_5;
+		i2c56 = &nvmeslot_6;
+		i2c57 = &nvmeslot_7;
+
+		/*
+		 *  i2c bus 60-67 assigned to NVMe slot 8-15
+		 */
+		i2c60 = &nvmeslot_8;
+		i2c61 = &nvmeslot_9;
+		i2c62 = &nvmeslot_10;
+		i2c63 = &nvmeslot_11;
+		i2c64 = &nvmeslot_12;
+		i2c65 = &nvmeslot_13;
+		i2c66 = &nvmeslot_14;
+		i2c67 = &nvmeslot_15;
+
+		/*
+		 *  i2c bus 70-77 assigned to NVMe slot 16-23
+		 */
+		i2c70 = &nvmeslot_16;
+		i2c71 = &nvmeslot_17;
+		i2c72 = &nvmeslot_18;
+		i2c73 = &nvmeslot_19;
+		i2c74 = &nvmeslot_20;
+		i2c75 = &nvmeslot_21;
+		i2c76 = &nvmeslot_22;
+		i2c77 = &nvmeslot_23;
+
+		/*
+		 *  i2c bus 80-81 assigned to NVMe M2 slot 0-1
+		 */
+		i2c80 = &nvme_m2_0;
+		i2c81 = &nvme_m2_1;
+
+		/*
+		 *  i2c bus 82 assigned to OCP slot
+		 */
+		i2c82 = &ocpslot;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpioA0mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 0) GPIO_ACTIVE_LOW>;
+	};
+
+	adc0mux: adc0mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 0>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc1mux: adc1mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 1>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc2mux: adc2mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 2>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc3mux: adc3mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 3>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc4mux: adc4mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 4>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc5mux: adc5mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 5>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc6mux: adc6mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 6>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc7mux: adc7mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 7>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc8mux: adc8mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 8>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc9mux: adc9mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 9>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc10mux: adc10mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 10>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc11mux: adc11mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 11>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc12mux: adc12mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 12>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc13mux: adc13mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 13>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0mux 0>, <&adc0mux 1>,
+			<&adc1mux 0>, <&adc1mux 1>,
+			<&adc2mux 0>, <&adc2mux 1>,
+			<&adc3mux 0>, <&adc3mux 1>,
+			<&adc4mux 0>, <&adc4mux 1>,
+			<&adc5mux 0>, <&adc5mux 1>,
+			<&adc6mux 0>, <&adc6mux 1>,
+			<&adc7mux 0>, <&adc7mux 1>,
+			<&adc8mux 0>, <&adc8mux 1>,
+			<&adc9mux 0>, <&adc9mux 1>,
+			<&adc10mux 0>, <&adc10mux 1>,
+			<&adc11mux 0>, <&adc11mux 1>,
+			<&adc12mux 0>, <&adc12mux 1>,
+			<&adc13mux 0>, <&adc13mux 1>,
+			<&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		/* spi-max-frequency = <50000000>; */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		/* spi-max-frequency = <100000000>; */
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			uefi@400000 {
+				reg = <0x400000 0x1C00000>;
+				label = "pnor-uefi";
+			};
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			 &pinctrl_rxd1_default
+			 &pinctrl_ncts1_default
+			 &pinctrl_nrts1_default>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			 &pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+			 &pinctrl_rxd3_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+			 &pinctrl_rxd4_default>;
+};
+
+/* The BMC's uart */
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+	smpro@4f {
+		compatible = "ampere,smpro";
+		reg = <0x4f>;
+	};
+	smpro@4e {
+		compatible = "ampere,smpro";
+		reg = <0x4e>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "microchip,24c64", "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	inlet_mem2: tmp175@28 {
+		compatible = "ti,tmp175";
+		reg = <0x28>;
+	};
+
+	inlet_cpu: tmp175@29 {
+		compatible = "ti,tmp175";
+		reg = <0x29>;
+	};
+
+	inlet_mem1: tmp175@2a {
+		compatible = "ti,tmp175";
+		reg = <0x2a>;
+	};
+
+	outlet_cpu: tmp175@2b {
+		compatible = "ti,tmp175";
+		reg = <0x2b>;
+	};
+
+	outlet1: tmp175@2c {
+		compatible = "ti,tmp175";
+		reg = <0x2c>;
+	};
+
+	outlet2: tmp175@2d {
+		compatible = "ti,tmp175";
+		reg = <0x2d>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		ocpslot: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			ocpslot_temp: temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		nvmeslot_0_7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_8_15: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		nvmeslot_16_23: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+		i2c-mux-idle-disconnect;
+
+		nvme_m2_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		nvme_m2_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+	};
+};
+
+&nvmeslot_0_7 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+		nvmeslot_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		nvmeslot_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+		nvmeslot_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		nvmeslot_4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+		nvmeslot_5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+		nvmeslot_6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+		nvmeslot_7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+
+	};
+};
+
+&nvmeslot_8_15 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_8: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+		nvmeslot_9: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		nvmeslot_10: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+		nvmeslot_11: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		nvmeslot_12: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+		nvmeslot_13: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+		nvmeslot_14: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+		nvmeslot_15: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&nvmeslot_16_23 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+		nvmeslot_17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		nvmeslot_18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+		nvmeslot_19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		nvmeslot_20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+		nvmeslot_21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+		nvmeslot_22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+		nvmeslot_23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	psu@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+	adm1278@10 {
+		compatible = "adi,adm1278";
+		reg = <0x10>;
+	};
+
+	adm1278@11 {
+		compatible = "adi,adm1278";
+		reg = <0x11>;
+	};
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2_default &pinctrl_pwm3_default
+			&pinctrl_pwm4_default &pinctrl_pwm5_default
+			&pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@1 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@2 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@5 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@6 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@7 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@8 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@9 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@10 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+
+	fan@11 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","","","host0-special-boot","","","","",
+	/*B0-B7*/	"i2c-backup-sel","","","",
+			"power-button","presence-cpu0","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"ps0-pgood","ps1-pgood","power-chassis-control","s0-ddr-save",
+			"power-chassis-good", "s1-ddr-save","","",
+	/*G0-G7*/	"host0-ready","host0-shd-req-n","host0-shd-ack-n",
+			"s0-overtemp-n","","","","",
+	/*H0-H7*/	"uart1-mode1","uart2-mode1","uart3-mode1","uart4-mode1",
+			"ps0-vin-good","ps1-vin-good","","i2c6-reset-n",
+	/*I0-I7*/	"presence-ps0","presence-ps1","s1-special-boot","","","","","",
+	/*J0-J7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
+			"host0-reboot-ack-n","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","host0-sysreset-n","s0-spi-auth-fail-n","","","",
+	/*M0-M7*/	"","","","","s0-i2c9-alert-n","s1-i2c9-alert-n","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","identify-button","led-identify","",
+	/*R0-R7*/	"","","ext-hightemp-n","","ocp-main-pwren","reset-button","","",
+	/*S0-S7*/	"s0-vr-hot-n","s1-vr-hot-n","","",
+			"rtc-battery-voltage-read-enable","vr-pmbus-sel-n","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","bmc-vga-en-n","","","","",
+	/*Z0-Z7*/	"s0-plimit","s1-fault-alert","s1-fw-boot-ok","s0-rtc-lock","",
+			"s1-sys-auth-failure-n","s1-overtemp-n","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"s1-hightemp-n","s1-plimit","s0-ddr-addr","s1-ddr-addr","","",
+			"","",
+	/*AC0-AC7*/	"sys-pwr-gd","","spi0-program-sel","spi0-backup-sel","bmc-ok",
+			"","presence-cpu1","ocp-pgood";
+
+	i2c4-o-en-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "i2c4-o-en";
+	};
+
+	ocp-aux-pwren-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ocp-aux-pwren";
+	};
+
+	bmc-ready-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AC, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "bmc-ready";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
new file mode 100644
index 000000000000..53b4372f1a08
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
@@ -0,0 +1,622 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright 2024 Ampere Computing LLC.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ampere Mt. Jefferson BMC";
+	compatible = "ampere,mtjefferson-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c20 = &i2c4_bus70_chn0;
+		i2c22 = &i2c4_bus70_chn2;
+
+		/*
+		 *  I2C OCP alias port
+		 */
+		i2c30 = &ocpslot;
+
+		/*
+		 *  I2C NVMe alias port
+		 */
+		i2c48 = &nvmeslot_0;
+		i2c49 = &nvmeslot_1;
+		i2c50 = &nvmeslot_2;
+		i2c51 = &nvmeslot_3;
+		i2c52 = &nvmeslot_4;
+		i2c53 = &nvmeslot_5;
+		i2c54 = &nvmeslot_6;
+		i2c55 = &nvmeslot_7;
+		i2c56 = &nvmeslot_8;
+		i2c57 = &nvmeslot_9;
+		i2c58 = &nvmeslot_10;
+		i2c59 = &nvmeslot_11;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	voltage_mon_reg: voltage-mon-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ltc2497_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-bmc-ready {
+			gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH | GPIO_TRANSITORY)>;
+		};
+
+		led-sw-heartbeat {
+			gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-identify {
+			gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-fault {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels =   <&adc0 0>, <&adc0 1>, <&adc0 2>,
+				<&adc_i2c_2 0>, <&adc_i2c_2 1>,
+				<&adc_i2c_2 2>, <&adc_i2c_2 3>,
+				<&adc_i2c_2 4>, <&adc_i2c_2 5>,
+				<&adc_i2c_2 6>, <&adc_i2c_2 7>,
+				<&adc_i2c_2 8>, <&adc_i2c_2 9>,
+				<&adc_i2c_2 10>, <&adc_i2c_2 11>,
+				<&adc_i2c_2 12>, <&adc_i2c_2 13>,
+				<&adc_i2c_2 14>, <&adc_i2c_2 15>,
+				<&adc_i2c_0 0>, <&adc_i2c_0 1>,
+				<&adc_i2c_0 2>, <&adc_i2c_0 3>,
+				<&adc_i2c_0 4>, <&adc_i2c_0 5>,
+				<&adc_i2c_0 6>, <&adc_i2c_0 7>,
+				<&adc_i2c_0 8>, <&adc_i2c_0 9>,
+				<&adc_i2c_0 10>, <&adc_i2c_0 11>,
+				<&adc_i2c_0 12>;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+	bus-frequency = <1000000>;
+	multi-master;
+	mctp-controller;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c4_bus70_chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c256";
+				reg = <0x52>;
+				pagesize = <32>;
+			};
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+			temperature-sensor@4a {
+				compatible = "ti,tmp75";
+				reg = <0x4a>;
+			};
+			temperature-sensor@4b {
+				compatible = "ti,tmp464";
+				reg = <0x4b>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				channel@0 {
+					reg = <0x0>;
+					status = "disabled";
+				};
+				channel@1 {
+					reg = <0x1>;
+					status = "disabled";
+				};
+				channel@2 {
+					reg = <0x2>;
+					status = "disabled";
+				};
+				channel@3 {
+					reg = <0x3>;
+					status = "disabled";
+				};
+				channel@4 {
+					reg = <0x4>;
+				};
+			};
+			temperature-sensor@4d {
+				compatible = "ti,tmp75";
+				reg = <0x4d>;
+			};
+			temperature-sensor@4e {
+				compatible = "ti,tmp75";
+				reg = <0x4e>;
+			};
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+			temperature-sensor@28 {
+				compatible = "nuvoton,nct7802";
+				reg = <0x28>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel@1 { /* RTD1 */
+					reg = <1>;
+					sensor-type = "temperature";
+					temperature-mode = "thermistor";
+				};
+			};
+			adc_i2c_0: adc@14 {
+				compatible = "lltc,ltc2497";
+				reg = <0x14>;
+				vref-supply = <&voltage_mon_reg>;
+				#io-channel-cells = <1>;
+			};
+		};
+
+		i2c4_bus70_chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			adc_i2c_2: adc@14 {
+				compatible = "lltc,ltc2497";
+				reg = <0x14>;
+				vref-supply = <&voltage_mon_reg>;
+				#io-channel-cells = <1>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_8: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+				nvmeslot_9: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+				nvmeslot_10: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+				};
+				nvmeslot_11: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+				};
+			};
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_4: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_5: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_6: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_7: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+
+			i2c-mux@74 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x74>;
+				i2c-mux-idle-disconnect;
+
+				ocpslot: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					ocpslot_temp: temperature-sensor@1f {
+						compatible = "ti,tmp421";
+						reg = <0x1f>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						channel@0 {
+							reg = <0x0>;
+							status = "disabled";
+						};
+						channel@1 {
+							reg = <0x1>;
+						};
+					};
+				};
+
+				nvmeslot_0: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_1: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_2: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_3: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	fan-controller@5c {
+		compatible = "onnn,adt7462";
+		reg = <0x5c>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+
+	temperature-sensor@18 {
+		compatible = "jedec,jc-42.4-temp";
+		reg = <0x18>;
+	};
+
+	temperature-sensor@1a {
+		compatible = "jedec,jc-42.4-temp";
+		reg = <0x1a>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	bmc_ast2600_cpu: temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	gpio_expander1: gpio-expander@22 {
+		compatible = "nxp,pca9535";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"presence-ocp1","presence-ocp2",
+			"","",
+			"","",
+			"","",
+			"","",
+			"","",
+			"","",
+			"","";
+	};
+};
+
+&adc0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","cpu-type-detect","i2c2-reset-n","i2c6-reset-n","i2c5-reset-n",
+	/*B0-B7*/	"","","","","host0-sysreset-n","host0-pmin-n","fru-rd-complete",
+			"chassis-id-sel",
+	/*C0-C7*/	"s0-vrd-fault-n","","bmc-debug-mode","","cpld-3v3-irq-n","","vrd-sel",
+			"spd-sel",
+	/*D0-D7*/	"presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n",
+			"","","","",
+	/*E0-E7*/	"eth-phy-rst-n","eth-phy-int-n","","","","","","",
+	/*F0-F7*/	"s0-pcp-oc-warn-n","","power-chassis-control",
+			"cpu-bios-recover","s0-heartbeat","hs-scout-proc-hot","s0-vr-hot-n","",
+	/*G0-G7*/	"","","hsc-12vmain-alt1-n","","","bp-cpld-program-en","led-fp-sta-gr",
+			"led-fp-sta-amb",
+	/*H0-H7*/	"jtag-program-sel","jtag-cmpl2","wd-disable-n","power-chassis-good","","",
+			"","",
+	/*I0-I7*/	"","","","","","","power-button","rtc-battery-voltage-read-enable",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","reset-button","","","",
+	/*M0-M7*/	"nmi-n","s0-ddr-save","soc-spi-nor-access","presence-cpu0","s0-rtc-lock",
+			"","","",
+	/*N0-N7*/	"hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb",
+			"jtag-dbgr-prsnt-n","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"ps0-ac-loss-n","ps1-ac-loss-n","","","led-fault","user-mode","jtag-srst-n",
+			"led-bmc-hb",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","identify-button","led-identify","","spi-nor-access","host0-ready","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
+			"host0-reboot-ack-n","s0-fw-boot-ok","host0-shd-req-n",
+			"host0-shd-ack-n","s0-overtemp-n",
+	/*W0-W7*/	"ocp-aux-pwren","ocp-main-pwren","ocp-pgood","",
+			"bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","vrd-prg-en-n","","","","host0-special-boot",
+	/*Z0-Z7*/	"","ps0-pgood","ps1-pgood","","","","","";
+
+	ocp-aux-pwren-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ocp-aux-pwren";
+	};
+
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","","s0-soc-pgood","vga-ft-press-n","emmc-rst-n","s01-uart1-sel",
+	/*18C0-18C7*/	"uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1",
+			"","","","",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
new file mode 100644
index 000000000000..2b336aa0146d
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
@@ -0,0 +1,1061 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2022, Ampere Computing LLC
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ampere Mt.Mitchell BMC";
+	compatible = "ampere,mtmitchell-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial7 = &uart8;
+		serial8 = &uart9;
+
+		/*
+		 * I2C temperature alias port
+		 */
+		i2c20 = &i2c4_bus70_chn0;
+		i2c21 = &i2c4_bus70_chn1;
+		i2c22 = &i2c4_bus70_chn2;
+		i2c23 = &i2c4_bus70_chn3;
+
+		/*
+		 *  i2c bus 30-31 assigned to OCP slot 0-1
+		 */
+		i2c30 = &ocpslot_0;
+		i2c31 = &ocpslot_1;
+
+		/*
+		 *  i2c bus 32-33 assigned to Riser slot 0-1
+		 */
+		i2c32 = &i2c_riser0;
+		i2c33 = &i2c_riser1;
+
+		/*
+		 *  i2c bus 38-39 assigned to FRU on Riser slot 0-1
+		 */
+		i2c38 = &i2c_riser0_chn_0;
+		i2c39 = &i2c_riser1_chn_0;
+
+		/*
+		 *  I2C NVMe alias port
+		 */
+		i2c100 = &backplane_0;
+		i2c48 = &nvmeslot_0;
+		i2c49 = &nvmeslot_1;
+		i2c50 = &nvmeslot_2;
+		i2c51 = &nvmeslot_3;
+		i2c52 = &nvmeslot_4;
+		i2c53 = &nvmeslot_5;
+		i2c54 = &nvmeslot_6;
+		i2c55 = &nvmeslot_7;
+
+		i2c101 = &backplane_1;
+		i2c56 = &nvmeslot_8;
+		i2c57 = &nvmeslot_9;
+		i2c58 = &nvmeslot_10;
+		i2c59 = &nvmeslot_11;
+		i2c60 = &nvmeslot_12;
+		i2c61 = &nvmeslot_13;
+		i2c62 = &nvmeslot_14;
+		i2c63 = &nvmeslot_15;
+
+		i2c102 = &backplane_2;
+		i2c64 = &nvmeslot_16;
+		i2c65 = &nvmeslot_17;
+		i2c66 = &nvmeslot_18;
+		i2c67 = &nvmeslot_19;
+		i2c68 = &nvmeslot_20;
+		i2c69 = &nvmeslot_21;
+		i2c70 = &nvmeslot_22;
+		i2c71 = &nvmeslot_23;
+
+		i2c80 = &nvme_m2_0;
+		i2c81 = &nvme_m2_1;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		/*
+		 * Use gpio-leds to configure GPIOW5 (bmc-ready) pin to be reseted when
+		 * watchdog timeout.
+		 */
+		led-bmc-ready {
+			gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH | GPIO_TRANSITORY)>;
+		};
+
+		led-sw-heartbeat {
+			gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-identify {
+			gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-fault {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-fan-fault {
+			gpios = <&gpio_expander1 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-psu-fault {
+			gpios = <&gpio_expander1 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	voltage_mon_reg: voltage-mon-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ltc2497_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	gpioI5mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		mux-gpios = <&gpio0 ASPEED_GPIO(I, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	adc0mux: adc0mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 0>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc1mux: adc1mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 1>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc2mux: adc2mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 2>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc3mux: adc3mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 3>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc4mux: adc4mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 4>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc5mux: adc5mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 5>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc6mux: adc6mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 6>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc7mux: adc7mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 7>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc8mux: adc8mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 8>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc9mux: adc9mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 9>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc10mux: adc10mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 10>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc11mux: adc11mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 11>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc12mux: adc12mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 12>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc13mux: adc13mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 13>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc14mux: adc14mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 14>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc15mux: adc15mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 15>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels =	<&adc0mux 0>, <&adc0mux 1>,
+				<&adc1mux 0>, <&adc1mux 1>,
+				<&adc2mux 0>, <&adc2mux 1>,
+				<&adc3mux 0>, <&adc3mux 1>,
+				<&adc4mux 0>, <&adc4mux 1>,
+				<&adc5mux 0>, <&adc5mux 1>,
+				<&adc6mux 0>, <&adc6mux 1>,
+				<&adc7mux 0>, <&adc7mux 1>,
+				<&adc8mux 0>, <&adc8mux 1>,
+				<&adc9mux 0>, <&adc9mux 1>,
+				<&adc10mux 0>, <&adc10mux 1>,
+				<&adc11mux 0>, <&adc11mux 1>,
+				<&adc12mux 0>, <&adc12mux 1>,
+				<&adc13mux 0>, <&adc13mux 1>,
+				<&adc14mux 0>, <&adc14mux 1>,
+				<&adc15mux 0>, <&adc15mux 1>,
+				<&adc_i2c_1 0>, <&adc_i2c_1 1>,
+				<&adc_i2c_1 2>, <&adc_i2c_1 3>,
+				<&adc_i2c_1 4>, <&adc_i2c_1 5>,
+				<&adc_i2c_1 6>, <&adc_i2c_1 7>,
+				<&adc_i2c_1 8>, <&adc_i2c_1 9>,
+				<&adc_i2c_1 10>, <&adc_i2c_1 11>,
+				<&adc_i2c_1 12>, <&adc_i2c_1 13>,
+				<&adc_i2c_1 14>, <&adc_i2c_1 15>,
+				<&adc0 0>, <&adc0 1>,
+				<&adc0 2>;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	temperature-sensor@2e {
+		compatible = "adi,adt7490";
+		reg = <0x2e>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	psu@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	bus-frequency = <1000000>;
+	multi-master;
+	mctp-controller;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	adc_i2c_0: adc@14 {
+		compatible = "lltc,ltc2497";
+		reg = <0x14>;
+		vref-supply = <&voltage_mon_reg>;
+		#io-channel-cells = <1>;
+	 };
+
+	adc_i2c_1: adc@16 {
+		compatible = "lltc,ltc2497";
+		reg = <0x16>;
+		vref-supply = <&voltage_mon_reg>;
+		#io-channel-cells = <1>;
+	 };
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c4_bus70_chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			outlet_temp1: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			psu1_inlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			pcie_zone_temp1: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			psu0_inlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			pcie_zone_temp2: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			outlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			mb_inlet_temp1: temperature-sensor@7c {
+				compatible = "microchip,emc1413";
+				reg = <0x7c>;
+			};
+			mb_inlet_temp2: temperature-sensor@4c {
+				compatible = "microchip,emc1413";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		ocpslot_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			ocpslot_0_temp: temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		ocpslot_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			ocpslot_1_temp: temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		i2c_riser0: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				i2c_riser0_chn_0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					eeprom@50 {
+						compatible = "atmel,24c02";
+						reg = <0x50>;
+						pagesize = <16>;
+					};
+				};
+			};
+		};
+
+		i2c_riser1: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				i2c_riser1_chn_0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					eeprom@50 {
+						compatible = "atmel,24c02";
+						reg = <0x50>;
+						pagesize = <16>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+	};
+
+	gpio@77 {
+		compatible = "nxp,pca9539";
+		reg = <0x77>;
+		gpio-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"ext-vref-sel","","presence-hdd-bp5-n","presence-hdd-bp6-n",
+		"","bmc-riser-en-n","bmc-ocp1-en-n","bmc-ocp0-en-n",
+		"","","","",
+		"","","","";
+
+		bmc-ocp0-en-hog {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_LOW>;
+			output-high;
+			line-name = "bmc-ocp0-en-n";
+		};
+	};
+
+	fan-controller0@20 {
+		compatible = "maxim,max31790";
+		reg = <0x20>;
+	};
+
+	fan-controller1@2f {
+		compatible = "maxim,max31790";
+		reg = <0x2f>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		backplane_1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_8: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+				nvmeslot_9: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+				nvmeslot_10: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+				};
+				nvmeslot_11: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+				};
+				nvmeslot_12: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_13: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_14: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_15: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+
+			tmp432@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+		};
+
+		backplane_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_16: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+				nvmeslot_17: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+				nvmeslot_18: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+				};
+				nvmeslot_19: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+				};
+				nvmeslot_20: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_21: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_22: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_23: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+
+			tmp432@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+		};
+
+		backplane_0: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+				nvmeslot_1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+				nvmeslot_2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+				};
+				nvmeslot_3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+				};
+				nvmeslot_4: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_5: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_6: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_7: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+
+			tmp432@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvme_m2_0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+
+				nvme_m2_1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+			};
+		};
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	bmc_ast2600_cpu: temperature-sensor@35 {
+		compatible = "ti,tmp175";
+		reg = <0x35>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	gpio_expander1: gpio-expander@22 {
+		compatible = "nxp,pca9535";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"fan-fault","psu-fault",
+			"","",
+			"","",
+			"gpi0","gpi1",
+			"","",
+			"","",
+			"","",
+			"","";
+	};
+};
+
+&adc0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","i2c2-reset-n","i2c6-reset-n","i2c4-reset-n",
+	/*B0-B7*/	"","","","","host0-sysreset-n","host0-pmin-n","","",
+	/*C0-C7*/	"s0-vrd-fault-n","s1-vrd-fault-n","bmc-debug-mode","",
+			"irq-n","","vrd-sel","spd-sel",
+	/*D0-D7*/	"presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n",
+			"","bmc-ncsi-txen","","",
+	/*E0-E7*/	"","eth-phy-int-n","clk50m-bmc-ncsi","","","","","",
+	/*F0-F7*/	"s0-pcp-oc-warn-n","s1-pcp-oc-warn-n","power-chassis-control",
+			"cpu-bios-recover","s0-heartbeat","hs-csout-prochot",
+			"s0-vr-hot-n","s1-vr-hot-n",
+	/*G0-G7*/	"","","hsc-12vmain-alt1-n","","","","","",
+	/*H0-H7*/	"jtag-program-sel","fpga-program-b","wd-disable-n",
+			"power-chassis-good","","","","",
+	/*I0-I7*/	"","","","","","adc-sw","power-button","rtc-battery-voltage-read-enable",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","s0-ddr-save","soc-spi-nor-access","presence-cpu0",
+			"s0-rtc-lock","","","",
+	/*N0-N7*/	"hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb",
+			"jtag-dbgr-prsnt-n","s1-heartbeat","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"ps0-ac-loss-n","ps1-ac-loss-n","","",
+			"led-fault","cpld-user-mode","jtag-srst-n","led-bmc-hb",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","identify-button","led-identify",
+			"s1-ddr-save","spi-nor-access","host0-ready","presence-cpu1",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
+			"host0-reboot-ack-n","s0-fw-boot-ok","host0-shd-req-n",
+			"host0-shd-ack-n","s0-overtemp-n",
+	/*W0-W7*/	"ocp-aux-pwren","ocp-main-pwren","ocp-pgood","s1-pcp-pgood",
+			"bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
+	/*X0-X7*/	"i2c-backup-sel","s1-fault-alert","s1-fw-boot-ok",
+			"s1-hightemp-n","s0-spi-auth-fail-n","s1-sys-auth-failure-n",
+			"s1-overtemp-n","cpld-s1-spi-auth-fail-n",
+	/*Y0-Y7*/	"","","","","","","","host0-special-boot",
+	/*Z0-Z7*/	"reset-button","ps0-pgood","ps1-pgood","","","","","";
+
+	ocp-aux-pwren-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ocp-aux-pwren";
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","","","","s0-soc-pgood","",
+	/*18C0-18C7*/	"uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1",
+			"uart3-mode0","uart3-mode1","uart4-mode0","uart4-mode1",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts
new file mode 100644
index 000000000000..b550a48f48f0
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "HXT StarDragon 4800 REP2 AST2520";
+	compatible = "hxt,stardragon4800-rep2-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+						<&adc 4>, <&adc 5>, <&adc 6>, <&adc 8>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		system_fault1 {
+			label = "System_fault1";
+			gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		system_fault2 {
+			label = "System_fault2";
+			gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+			&pinctrl_spi2miso_default
+			&pinctrl_spi2mosi_default
+			&pinctrl_spi2cs0_default>;
+};
+
+&uart3 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
+	current-speed = <115200>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii2_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>,
+		 <&syscon ASPEED_CLK_MAC2RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	tmp421@1e {
+		compatible = "ti,tmp421";
+		reg = <0x1e>;
+	};
+	tmp421@2a {
+		compatible = "ti,tmp421";
+		reg = <0x2a>;
+	};
+	tmp421@1c {
+		compatible = "ti,tmp421";
+		reg = <0x1c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp421@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+	nvt210@4c {
+		compatible = "nvt210";
+		reg = <0x4c>;
+	};
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <128>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	pca9641@70 {
+		compatible = "nxp,pca9641";
+		reg = <0x70>;
+		i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+			dps650ab@58 {
+				compatible = "delta,dps650ab";
+				reg = <0x58>;
+			};
+		};
+	};
+
+	dps650ab@58 {
+		compatible = "delta,dps650ab";
+		reg = <0x58>;
+	};
+
+	dps650ab@59 {
+		compatible = "delta,dps650ab";
+		reg = <0x59>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&gpio {
+	pin-gpio-c7-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BIOS_SPI_MUX_S";
+	};
+	pin-gpio-d1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PHY2_RESET_N";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
new file mode 100644
index 000000000000..3ebd80db06f9
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/{
+	model = "ASRock E3C246D4I BMC";
+	compatible = "asrock,e3c246d4i-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			/* BMC_HB_LED_N */
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		system-fault {
+			/* SYSTEM_FAULT_LED_N */
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			panic-indicator;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		uid-button {
+			label = "uid-button";
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 1)>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>; /* 50 MHz */
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x2f8>;
+	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* thermal sensor, one diode run to a disconnected header */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* FRU EEPROM */
+	eeprom@57 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+		};
+	};
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "BMC_MAC1_INTB", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI",
+			"", "", "", "",
+		/*  B */ "", "", "", "", "", "IRQ_BMC_PCH_SMI_LPC_N", "", "",
+		/*  C */ "", "", "", "", "", "", "", "",
+		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+			"", "", "", "",
+		/*  E */ "", "", "", "", "", "", "", "",
+		/*  F */ "LOCATORLED_STATUS_N", "LOCATORBTN", "", "",
+			"", "", "BMC_PCH_SCI_LPC", "BMC_NCSI_MUX_CTL",
+		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+			"BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "SML0ALERT",
+		/*  H */ "FM_ME_RCVR_N", "O_PWROK", "SKL_CNL_R", "D4_DIMM_EVENT_3V_N",
+			"MFG_MODE_N", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "BMC_SMI", "",
+			"", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "BMC_CTS1", "BMC_DCD1", "BMC_DSR1", "BMC_RI1",
+			"BMC_DTR1", "BMC_RTS1", "BMC_TXD1", "BMC_RXD1",
+		/*  M */ "BMC_LAN0_DIS_N", "BMC_LAN1_DIS_N", "", "",
+			"", "", "", "",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "",
+			"BMC_SBM_PRESENT_1_N", "BMC_SBM_PRESENT_2_N",
+			"BMC_SBM_PRESENT_3_N", "BMC_PCIE_WAKE_N",
+		/*  R */ "", "", "", "", "", "", "", "",
+		/*  S */ "PCHHOT_BMC_N", "", "RSMRST",
+			"", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "PS_PWROK", /* dummy always-high signal */
+			"", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "SLP_S3", "SLP_S5", "", "", "", "", "", "",
+		/*  Z */ "CPU_CATERR_BMC_PCH_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "CPU1_THERMTRIP_LATCH_N", "", "CPU1_PROCHOT_N", "",
+			"", "", "IRQ_SMI_ACTIVE_N", "FM_BIOS_POST_CMPLT_N",
+		/* AB */ "", "", "ME_OVERRIDE", "BMC_DMI_MODIFY",
+			"", "", "", "",
+		/* AC */ "LAD0", "LAD1", "LAD2", "LAD3",
+			"CK_33M_BMC", "LFRAME", "SERIRQ", "S_PLTRST";
+
+	/* Assert BMC_READY so BIOS doesn't sit around waiting for it */
+	bmc-ready-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&peci0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
new file mode 100644
index 000000000000..8c57a071f488
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/watchdog/aspeed-wdt.h>
+
+/{
+	model = "ASRock E3C256D4I BMC";
+	compatible = "asrock,e3c256d4i-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+
+		i2c20 = &i2c2mux0ch0;
+		i2c21 = &i2c2mux0ch1;
+		i2c22 = &i2c2mux0ch2;
+		i2c23 = &i2c2mux0ch3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC heartbeat */
+		led-0 {
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "timer";
+		};
+
+		/* system fault */
+		led-1 {
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_RED>;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <100000000>; /* 100 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c2mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c2mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c2mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c2mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	vrm@60 {
+		compatible = "isil,isl69269";
+		reg = <0x60>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	/* FRU eeprom */
+	eeprom@57 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+		};
+	};
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&wdt1 {
+	aspeed,reset-mask = <(AST2500_WDT_RESET_DEFAULT & ~AST2500_WDT_RESET_LPC)>;
+};
+
+&wdt2 {
+	aspeed,reset-mask = <(AST2500_WDT_RESET_DEFAULT & ~AST2500_WDT_RESET_LPC)>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default /* CPU */
+		&pinctrl_pwm2_default      /* rear */
+		&pinctrl_pwm4_default>;    /* front */
+
+	/* CPU */
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	/* rear */
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	/* front */
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "", "", "NMI_BTN_N", "BMC_NMI", "", "", "", "",
+		/*  B */ "", "", "", "", "", "", "", "",
+		/*  C */ "", "", "", "", "", "", "", "",
+		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+			"", "", "", "",
+		/*  E */ "", "", "", "", "", "", "", "",
+		/*  F */ "LOCATORLED_STATUS_N", "LOCATORBTN", "", "",
+			"", "", "BMC_PCH_SCI_LPC", "BMC_NCSI_MUX_CTL",
+		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+			"", "", "", "",
+		/*  H */ "FM_ME_RCVR_N", "O_PWROK", "", "D4_DIMM_EVENT_3V_N",
+			"MFG_MODE_N", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "BMC_SMI", "", "", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "", "", "", "", "", "",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "", "", "", "", "",
+		/*  R */ "", "", "", "", "", "", "", "",
+		/*  S */ "PCHHOT_BMC_N", "", "RSMRST", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "SLP_S3", "SLP_S5", "", "", "", "", "", "",
+		/*  Z */ "CPU_CATERR_BMC_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "CPU1_THERMTRIP_LATCH_N", "", "CPU1_PROCHOT_N", "",
+			"", "", "IRQ_SMI_ACTIVE_N", "FM_BIOS_POST_CMPLT_N",
+		/* AB */ "", "", "ME_OVERRIDE", "BMC_DMI_MODIFY", "", "", "", "",
+		/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */
+		&pinctrl_adc1_default	   /* 5VSB */
+		&pinctrl_adc2_default	   /* CPU1 */
+		&pinctrl_adc3_default	   /* VCCSA */
+		&pinctrl_adc4_default	   /* VCCM */
+		&pinctrl_adc5_default	   /* V10M */
+		&pinctrl_adc6_default	   /* VCCIO */
+		&pinctrl_adc7_default	   /* VCCGT */
+		&pinctrl_adc8_default	   /* VPPM */
+		&pinctrl_adc9_default	   /* BAT */
+		&pinctrl_adc10_default	   /* 3V */
+		&pinctrl_adc11_default	   /* 5V */
+		&pinctrl_adc12_default	   /* 12V */
+		&pinctrl_adc13_default	   /* GND */
+		&pinctrl_adc14_default	   /* GND */
+		&pinctrl_adc15_default>;   /* GND */
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts
new file mode 100644
index 000000000000..e306655ce4a3
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/{
+	model = "ASRock ROMED8HM3 BMC v1.00";
+	compatible = "asrock,romed8hm3-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		system-fault {
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>; /* 50 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x2f8>;
+	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* inlet temp sensor */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* IPB temp sensor */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+
+	/* IPB PMIC */
+	lm25066@40 {
+		compatible = "ti,lm25066";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <1000>;
+	};
+
+	/* 12VSB PMIC */
+	lm25066@41 {
+		compatible = "ti,lm25066";
+		reg = <0x41>;
+		shunt-resistor-micro-ohms = <10000>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* Baseboard FRU eeprom */
+	eeprom@50 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3_default
+		&pinctrl_pwm4_default
+		&pinctrl_pwm5_default
+		&pinctrl_pwm6_default>;
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0b>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0c>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0d>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0e>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "LOCATORLED_STATUS_N", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI",
+			"", "", "", "",
+		/*  B */ "POST_COMPLETE_N", "", "", "", "", "", "", "",
+		/*  C */ "", "", "", "", "PCIE_HP_SEL_N", "PCIE_SATA_SEL_N", "LOCATORBTN", "",
+		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+			"", "", "", "PSU_FAN_FAIL_N",
+		/*  E */ "", "", "", "", "", "", "", "",
+		/*  F */ "NIC_PWR_GOOD", "PRSNTB0", "PRSNTB1", "PRSNTB2",
+			"PRSNTB3", "", "3VSB_PCIE1_PG", "12V_PCIE1_PG",
+		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+			"BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "BMC_ALERT4_N",
+		/*  H */ "X24_C1_PRSNT", "X24_C2_PRSNT", "X24_C3_PRSNT", "FM_MEM_THERM_EVENT_BMC_R_N",
+			"FACMODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "", "P0_MA_DDR_QS_CS_N",
+			"", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "MEZZ_PWRBRK_N", "OCP_HP_RST_EN",
+			"MAIN_PWR_EN_G", "BMC_MAIN_EN", "AUX_PWR_EN_G", "BMC_AUX_EN",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "",
+			"BMC_SMB_PRESENT_1_N", "BMC_SMB_PRESENT_2_N",
+			"BMC_SMB_PRESENT_3_N", "BMC_PCIE_WAKE_N",
+		/*  R */ "", "", "THERMALTRIP_CLEAR_N", "", "", "", "", "",
+		/*  S */ "", "", "", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "SLP_S3", "SLP_S4_S5", "NODE_ID_1", "NODE_ID_2", "", "", "", "",
+		/*  Z */ "", "", "SYSTEM_FAULT_LED_N", "FAST_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "FM_CPU0_IBMC_THERMTRIP_N", "", "PROCHOT_L_G", "",
+			"", "", "", "",
+		/* AB */ "BMC_FORCE_SELFREFRESH", "PWRGD_OUT", "", "IRQ_BMC_PCH_SMI_LPC_N",
+			"", "", "", "",
+		/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default
+		&pinctrl_adc10_default
+		&pinctrl_adc11_default
+		&pinctrl_adc12_default
+		&pinctrl_adc13_default
+		&pinctrl_adc14_default
+		&pinctrl_adc15_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts
new file mode 100644
index 000000000000..c4097e4f2ca4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+
+/{
+	model = "ASRock SPC621D8HM3 BMC";
+	compatible = "asrock,spc621d8hm3-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+
+		i2c20 = &i2c1mux0ch0;
+		i2c21 = &i2c1mux0ch1;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC heartbeat */
+		led-0 {
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "timer";
+		};
+
+		/* system fault */
+		led-1 {
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_RED>;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>; /* 50 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x2f8>;
+	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* hardware monitor/thermal sensor */
+	temperature-sensor@29 {
+		compatible = "nuvoton,nct7802";
+		reg = <0x29>;
+	};
+
+	/* motherboard temp sensor (TMP1, near BMC) */
+	temperature-sensor@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+
+	/* motherboard FRU eeprom */
+	eeprom@50 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+		};
+	};
+
+	/* M.2 slot smbus mux */
+	i2c-mux@71 {
+		compatible = "nxp,pca9545";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c1mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c1mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		&pinctrl_pwm2_default
+		&pinctrl_pwm3_default
+		&pinctrl_pwm4_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "LOCATORLED_STATUS_N", "LOCATORBTN_N",
+			"BMC_READY_N", "FM_SPD_DDRCPU_LVLSHFT_EN",
+			"", "", "", "",
+		/*  B */ "NODE_ID_1", "NODE_ID_2", "PSU_FAN_FAIL_N", "",
+			"", "", "", "GPIO_RST",
+		/*  C */ "", "", "", "", "", "", "", "",
+		/*  D */ "FP_PWR_BTN_MUX_N", "FM_BMC_PWRBTN_OUT_N",
+			"FP_RST_BTN_N", "RST_BMC_RSTBTN_OUT_N",
+			"NMI_BTN_N", "BMC_NMI",
+			"", "",
+		/*  E */ "", "", "", "FM_ME_RCVR_N", "", "", "", "",
+		/*  F */ "BMC_SMB_SEL_N", "FM_CPU2_DISABLE_COD_N",
+			"FM_REMOTE_DEBUG_BMC_EN", "FM_CPU_ERR0_LVT3_EN",
+			"FM_CPU_ERR1_LVT3_EN", "FM_CPU_ERR2_LVT3_EN",
+			"FM_MEM_THERM_EVENT_CPU1_LVT3_N", "FM_MEM_THERM_EVENT_CPU2_LVT3_N",
+		/*  G */ "HWM_BAT_EN", "", "BMC_PHYRST_N", "FM_BIOS_SPI_BMC_CTRL",
+			"BMC_ALERT1_N", "BMC_ALERT2_N", "BMC_ALERT3_N", "IRQ_SML0_ALERT_N",
+		/*  H */ "BMC_SMB_PRESENT_1_N", "FM_PCH_CORE_VID_0", "FM_PCH_CORE_VID_1", "",
+			"FM_MFG_MODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "IRQ_PVDDQ_ABCD_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_ABCD_CPU2_VRHOT_LVC3_N",
+			"IRQ_PVDDQ_EFGH_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_EFGH_CPU2_VRHOT_LVC3_N",
+			"", "", "", "",
+		/*  J */ "", "", "", "", "", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "FM_PVCCIN_CPU1_PWR_IN_ALERT_N", "FM_PVCCIN_CPU2_PWR_IN_ALERT_N",
+			"IRQ_PVCCIN_CPU1_VRHOT_LVC3_N", "IRQ_PVCCIN_CPU2_VRHOT_LVC3_N",
+			"FM_CPU1_PROCHOT_BMC_LVC3_N", "",
+			"FM_CPU1_MEMHOT_OUT_N", "FM_CPU2_MEMHOT_OUT_N",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "", "", "", "RST_GLB_RST_WARN_N", "PCIE_WAKE_N",
+		/*  R */ "", "", "FM_BMC_SUSACK_N", "FM_BMC_EUP_LOT6_N",
+			"", "FM_BMC_PCH_SCI_LPC_N", "", "",
+		/*  S */ "FM_DBP_PRESENT_N", "FM_CPU2_SKTOCC_LCT3_N",
+			"FM_CPU1_FIVR_FAULT_LVT3", "FM_CPU2_FIVR_FAULT_LVT3",
+			 "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "FM_SLPS3_N", "FM_SLPS4_N", "", "FM_BMC_ONCTL_N_PLD",
+			"", "", "", "",
+		/*  Z */ "FM_CPU_MSMI_CATERR_LVT3_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "FM_CPU1_THERMTRIP_LATCH_LVT3_N", "FM_CPU2_THERMTRIP_LATCH_LVT3_N",
+			"FM_BIOS_POST_COMPLT_N", "DBP_BMC_SYSPWROK",
+			"", "IRQ_SML0_ALERT_MUX_N",
+			"IRQ_SMI_ACTIVE_N", "IRQ_NMI_EVENT_N",
+		/* AB */ "FM_PCH_BMC_THERMTRIP_N", "PWRGD_SYS_PWROK",
+			"ME_OVERRIDE", "IRQ_BMC_PCH_SMI_LPC_N",
+			"", "", "", "",
+		/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */
+		&pinctrl_adc1_default	   /* 5VSB */
+		&pinctrl_adc2_default	   /* CPU1 */
+		&pinctrl_adc3_default	   /* NC */
+		&pinctrl_adc4_default	   /* VCCMABCD */
+		&pinctrl_adc5_default	   /* VCCMEFGH */
+		&pinctrl_adc6_default	   /* NC */
+		&pinctrl_adc7_default	   /* NC */
+		&pinctrl_adc8_default	   /* PVNN_PCH */
+		&pinctrl_adc9_default	   /* 1P05PCH */
+		&pinctrl_adc10_default	   /* 1P8PCH */
+		&pinctrl_adc11_default	   /* BAT */
+		&pinctrl_adc12_default	   /* 3V */
+		&pinctrl_adc13_default	   /* 5V */
+		&pinctrl_adc14_default	   /* 12V */
+		&pinctrl_adc15_default>;   /* GND */
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
new file mode 100644
index 000000000000..e61a6cb43438
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Asrock Rack X570D4U BMC";
+	compatible = "asrock,x570d4u-bmc", "aspeed,ast2500";
+
+	aliases {
+		i2c40 = &i2c4mux0ch0;
+		i2c41 = &i2c4mux0ch1;
+		i2c42 = &i2c4mux0ch2;
+		i2c43 = &i2c4mux0ch3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pci_memory: region@9a000000 {
+			no-map;
+			reg = <0x9a000000 0x00010000>; /* 64K */
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02800000>;	/* 40M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/* led-heartbeat-n */
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "timer";
+		};
+
+		led-1 {
+			/* led-fault-n */
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_FAULT;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*  A */ "input-locatorled-n", "", "", "", "", "", "", "",
+	/*  B */ "input-bios-post-cmplt-n", "", "", "", "", "", "", "",
+	/*  C */ "", "", "", "", "", "", "control-locatorbutton-n", "",
+	/*  D */ "button-power-n", "control-power-n", "button-reset-n",
+		 "control-reset-n", "", "", "", "",
+	/*  E */ "", "", "", "", "", "", "", "",
+	/*  F */ "", "", "", "", "", "", "", "",
+	/*  G */ "output-hwm-vbat-enable", "input-id0-n", "input-id1-n",
+		 "input-id2-n", "input-aux-smb-alert-n", "",
+		 "input-psu-smb-alert-n", "",
+	/*  H */ "", "", "", "", "input-mfg-mode-n", "",
+		 "led-heartbeat-n", "input-case-open-n",
+	/*  I */ "", "", "", "", "", "", "", "",
+	/*  J */ "output-bmc-ready-n", "", "", "", "", "", "", "",
+	/*  K */ "", "", "", "", "", "", "", "",
+	/*  L */ "", "", "", "", "", "", "", "",
+	/*  M */ "", "", "", "", "", "", "", "",
+	/*  N */ "", "", "", "", "", "", "", "",
+	/*  O */ "", "", "", "", "", "", "", "",
+	/*  P */ "", "", "", "", "", "", "", "",
+	/*  Q */ "", "", "", "", "input-bmc-smb-present-n", "", "",
+		 "input-pcie-wake-n",
+	/*  R */ "", "", "", "", "", "", "", "",
+	/*  S */ "input-bmc-pchhot-n", "", "", "", "", "", "", "",
+	/*  T */ "", "", "", "", "", "", "", "",
+	/*  U */ "", "", "", "", "", "", "", "",
+	/*  V */ "", "", "", "", "", "", "", "",
+	/*  W */ "", "", "", "", "", "", "", "",
+	/*  X */ "", "", "", "", "", "", "", "",
+	/*  Y */ "input-sleep-s3-n", "input-sleep-s5-n", "", "", "", "",
+		 "", "",
+	/*  Z */ "", "", "led-fault-n", "output-bmc-throttle-n", "", "",
+		 "", "",
+	/* AA */ "input-cpu1-thermtrip-latch-n", "",
+		 "input-cpu1-prochot-n", "", "", "", "", "",
+	/* AB */ "", "input-power-good", "", "", "", "", "", "",
+	/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <10000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii2_default &pinctrl_mdio2_default>;
+	use-ncsi;
+
+	nvmem-cells = <&eth1_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+	/* SMBus on auxiliary panel header (AUX_PANEL1) */
+	status = "okay";
+};
+
+&i2c1 {
+	/* Hardware monitoring SMBus */
+	status = "okay";
+
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	/* PSU SMBus (PSU_SMB1) */
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c4mux0ch0: i2c@0 {
+			/* SMBus on PCI express 16x slot */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c4mux0ch1: i2c@1 {
+			/* SMBus on PCI express 8x slot */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c4mux0ch2: i2c@2 {
+			/* Unknown */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c4mux0ch3: i2c@3 {
+			/* SMBus on PCI express 1x slot */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c5 {
+	/* SMBus on BMC connector (BMC_SMB_1) */
+	status = "okay";
+};
+
+&i2c7 {
+	/* FRU and SPD EEPROM SMBus */
+	status = "okay";
+
+	eeprom@57 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+
+			eth1_macaddress: macaddress@3f88 {
+				reg = <0x3f88 6>;
+			};
+		};
+	};
+};
+
+&i2c8 {
+	/* SMBus on intelligent platform management bus header (IPMB_1) */
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&p2a {
+	status = "okay";
+	memory-region = <&pci_memory>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+				&pinctrl_pwm1_default
+				&pinctrl_pwm2_default
+				&pinctrl_pwm3_default
+				&pinctrl_pwm4_default
+				&pinctrl_pwm5_default>;
+
+	fan@0 {
+		/* FAN1 (4-pin) */
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		/* FAN2 (4-pin) */
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		/* FAN3 (4-pin) */
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		/* FAN4 (6-pin) */
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0b>;
+	};
+
+	fan@4 {
+		/* FAN6 (6-pin) */
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0d>;
+	};
+
+	fan@5 {
+		/* FAN5 (6-pin) */
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0c>;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default       /* 3VSB */
+			&pinctrl_adc1_default    /* 5VSB */
+			&pinctrl_adc2_default    /* VCPU */
+			&pinctrl_adc3_default    /* VSOC */
+			&pinctrl_adc4_default    /* VCCM */
+			&pinctrl_adc5_default    /* APU-VDDP */
+			&pinctrl_adc6_default    /* PM-VDD-CLDO */
+			&pinctrl_adc7_default    /* PM-VDDCR-S5 */
+			&pinctrl_adc8_default    /* PM-VDDCR */
+			&pinctrl_adc9_default    /* VBAT */
+			&pinctrl_adc10_default   /* 3V */
+			&pinctrl_adc11_default   /* 5V */
+			&pinctrl_adc12_default>; /* 12V */
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts
new file mode 100644
index 000000000000..64f4ed07c7d2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 ASUS Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include "aspeed-g6-pinctrl.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "ASUS-X4TF";
+	compatible = "asus,x4tf-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial4:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+				<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+				<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-heartbeat {
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-uid {
+			gpios = <&gpio0 ASPEED_GPIO(P, 1) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+			default-state = "off";
+		};
+
+		led-status_Y {
+			gpios = <&gpio1 ASPEED_GPIO(B, 1) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-sys_boot_status {
+			gpios = <&gpio1 ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&lpc_snoop {
+	snoop-ports = <0x80>;
+	status = "okay";
+};
+
+&mac2 {
+	status = "okay";
+	phy-mode = "rmii";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rmii";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "bios";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	pca9555_4_20: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9555_4_22: gpio@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9555_4_24: gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*A0 - A3 0*/	"", "STRAP_BMC_BATTERY_GPIO1", "", "",
+		/*A4 - A7 4*/	"", "", "", "",
+		/*B0 - B7 8*/	"", "", "", "", "", "", "", "";
+	};
+
+	pca9555_4_26: gpio@26 {
+		compatible = "nxp,pca9555";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_4: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	pca9555_5_24: gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	i2c-mux@70  {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70 >;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_5: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			pca9555_5_5_20: gpio@20 {
+				compatible = "nxp,pca9555";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"", "", "", "", "", "", "", "",
+					"", "", "SYS_FAN6", "SYS_FAN5",
+					"SYS_FAN4", "SYS_FAN3",
+					"SYS_FAN2", "SYS_FAN1";
+			};
+
+			pca9555_5_5_21: gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina219";
+				reg = <0x44>;
+				shunt-resistor = <2>;
+			};
+		};
+
+		channel_6: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_7: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_8: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	pca9555_6_27: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9555_6_20: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*A0 0*/	"", "", "", "", "", "", "", "",
+		/*B0 8*/	"Drive_NVMe1", "Drive_NVMe2", "", "",
+		/*B4 12*/	"", "", "", "";
+	};
+
+	pca9555_6_21: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		idle-state = <1>;
+
+		channel_9: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina219";
+				reg = <0x40>;
+				shunt-resistor = <2>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina219";
+				reg = <0x41>;
+				shunt-resistor = <5>;
+			};
+		};
+
+		channel_10: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_11: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_12: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		channel_13: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_14: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_15: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_16: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		channel_17: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_18: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina219";
+				reg = <0x41>;
+				shunt-resistor = <5>;
+			};
+		};
+
+		channel_19: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_20: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+	multi-master;
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c08";
+		reg = <0x51>;
+	};
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&sdc {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs1 {
+	aspeed,lpc-io-reg = <0xca0>;
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8>;
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0 0*/	"", "", "", "", "", "", "", "",
+	/*B0 8*/	"", "", "", "", "", "", "PS_PWROK", "",
+	/*C0 16*/	"", "", "", "", "", "", "", "",
+	/*D0 24*/	"", "", "", "", "", "", "", "",
+	/*E0 32*/	"", "", "", "", "", "", "", "",
+	/*F0 40*/	"", "", "", "", "", "", "", "",
+	/*G0 48*/	"", "", "", "", "", "", "", "",
+	/*H0 56*/	"", "", "", "", "", "", "", "",
+	/*I0 64*/	"", "", "", "", "", "", "", "",
+	/*J0 72*/	"", "", "", "", "", "", "", "",
+	/*K0 80*/	"", "", "", "", "", "", "", "",
+	/*L0 88*/	"", "", "", "", "", "", "", "",
+	/*M0 96*/	"", "", "", "", "", "", "", "",
+	/*N0 104*/	"", "", "", "",
+	/*N4 108*/	"POST_COMPLETE", "ESR1_GPIO_AST_SPISEL", "", "",
+	/*O0 112*/	"", "", "", "", "", "", "", "",
+	/*P0 120*/	"ID_BUTTON", "ID_OUT", "POWER_BUTTON", "POWER_OUT",
+	/*P4 124*/	"RESET_BUTTON", "RESET_OUT", "", "HEARTBEAT",
+	/*Q0 128*/	"", "", "", "", "", "", "", "",
+	/*R0 136*/	"", "", "", "", "", "", "", "",
+	/*S0 144*/	"", "", "", "", "", "", "", "",
+	/*T0 152*/	"", "", "", "", "", "", "", "",
+	/*U0 160*/	"", "", "", "", "", "", "", "",
+	/*V0 168*/	"", "", "", "", "", "", "", "",
+	/*W0 176*/	"", "", "", "", "", "", "", "",
+	/*X0 184*/	"", "", "", "", "", "", "", "",
+	/*Y0 192*/	"", "", "", "", "", "", "", "",
+	/*Z0 200*/	"", "", "", "", "", "", "", "";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts
new file mode 100644
index 000000000000..54a5509b04f1
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts
@@ -0,0 +1,940 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2020 Bytedance.
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Bytedance G220A BMC";
+	compatible = "bytedance,g220a-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+		i2c14 = &channel_3_0;
+		i2c15 = &channel_3_1;
+		i2c16 = &channel_3_2;
+		i2c17 = &channel_3_3;
+		i2c18 = &channel_6_0;
+		i2c19 = &channel_6_1;
+		i2c20 = &channel_6_2;
+		i2c21 = &channel_6_3;
+		i2c22 = &channel_6_4;
+		i2c23 = &channel_6_5;
+		i2c24 = &channel_6_6;
+		i2c25 = &channel_6_7;
+		i2c26 = &channel_6_8;
+		i2c27 = &channel_6_9;
+		i2c28 = &channel_6_10;
+		i2c29 = &channel_6_11;
+		i2c30 = &channel_6_12;
+		i2c31 = &channel_6_13;
+		i2c32 = &channel_6_14;
+		i2c33 = &channel_6_15;
+		i2c34 = &channel_6_16;
+		i2c35 = &channel_6_17;
+		i2c36 = &channel_6_18;
+		i2c37 = &channel_6_19;
+		i2c38 = &channel_6_20;
+		i2c39 = &channel_6_21;
+		i2c40 = &channel_6_22;
+		i2c41 = &channel_6_23;
+		i2c42 = &channel_6_24;
+		i2c43 = &channel_6_25;
+		i2c44 = &channel_10_0;
+		i2c45 = &channel_10_1;
+		i2c46 = &channel_10_2;
+		i2c47 = &channel_10_3;
+		i2c48 = &channel_10_4;
+		i2c49 = &channel_10_5;
+		i2c50 = &channel_10_6;
+		i2c51 = &channel_10_7;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@bc000000 {
+			no-map;
+			reg = <0xbc000000 0x04000000>; /* 64M */
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		bmc_alive {
+			label = "bmc_alive";
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+			led-pattern = <1000 1000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		event-burn-in-signal {
+			label = "burn-in";
+			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(R, 5)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-rear-riser1-presence {
+			label = "rear-riser1-presence";
+			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <1>;
+		};
+
+		event-alrt-pvddq-cpu0 {
+			label = "alrt-pvddq-cpu0";
+			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		event-rear-riser0-presence {
+			label = "rear-riser0-presence";
+			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+			linux,code = <3>;
+		};
+
+		event-fault-pvddq-cpu0 {
+			label = "fault-pvddq-cpu0";
+			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		event-alrt-pvddq-cpu1 {
+			label = "alrt-pvddq-cpu1";
+			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		event-fault-pvddq-cpu1 {
+			label = "alrt-pvddq-cpu1";
+			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fault-pvccin-cpu1 {
+			label = "fault-pvccin-cpuq";
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		event-bmc-rom0-wp {
+			label = "bmc-rom0-wp";
+			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+		};
+
+		event-bmc-rom1-wp {
+			label = "bmc-rom1-wp";
+			gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <11>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+
+		event-fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
+			linux,code = <14>;
+		};
+
+		event-fan5-presence {
+			label = "fan5-presence";
+			gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
+			linux,code = <15>;
+		};
+
+		event-front-bp1-presence {
+			label = "front-bp1-presence";
+			gpios = <&pca1 8 GPIO_ACTIVE_LOW>;
+			linux,code = <16>;
+		};
+
+		event-rear-bp-presence {
+			label = "rear-bp-presence";
+			gpios = <&pca1 9 GPIO_ACTIVE_LOW>;
+			linux,code = <17>;
+		};
+
+		event-fault-pvccin-cpu0 {
+			label = "fault-pvccin-cpu0";
+			gpios = <&pca1 10 GPIO_ACTIVE_LOW>;
+			linux,code = <18>;
+		};
+
+		event-alrt-p1v05-pvcc {
+			label = "alrt-p1v05-pvcc1";
+			gpios = <&pca1 11 GPIO_ACTIVE_LOW>;
+			linux,code = <19>;
+		};
+
+		event-fault-p1v05-pvccio {
+			label = "alrt-p1v05-pvcc1";
+			gpios = <&pca1 12 GPIO_ACTIVE_LOW>;
+			linux,code = <20>;
+		};
+
+		event-alrt-p1v8-pvccio {
+			label = "alrt-p1v8-pvccio";
+			gpios = <&pca1 13 GPIO_ACTIVE_LOW>;
+			linux,code = <21>;
+		};
+
+		event-fault-p1v8-pvccio {
+			label = "fault-p1v8-pvccio";
+			gpios = <&pca1 14 GPIO_ACTIVE_LOW>;
+			linux,code = <22>;
+		};
+
+		event-front-bp0-presence {
+			label = "front-bp0-presence";
+			gpios = <&pca1 15 GPIO_ACTIVE_LOW>;
+			linux,code = <23>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&adc {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+	aspeed,alt-boot;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"SMRST_OCP_N","MAC2_LINK","BMC_CPLD_SMB_RST_R_N","BMC_CPLD_GPIO0",
+			"","","","",
+	/*B0-B7*/	"BMC_INIT_R_OK","FM_BOARD_REV_ID2","FM_PROJECT_ID7","FAULT_P12V_STBY_N",
+			"","CPU0_PROCHOT_LVT3_N","","BIOS_LOAD_DEFAULT_R_N",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"FM_PROJECT_ID0","FM_PROJECT_ID1","FM_PROJECT_ID2","FM_PROJECT_ID3",
+			"FM_PROJECT_ID4","FM_PROJECT_ID5","","",
+	/*F0-F7*/	"PSU0_PRSNT_N","PSU1_PRSNT_N","","FAULT_P12V_NVME_N",
+			"BIOS_DEBUG_MODE_R_N","DISABLE_CPU_DDR_R_SPD","COOLING_STRATEGY",
+			"PCH_GLB_RST_N",
+	/*G0-G7*/	"P12V_PMBUS_ALERT_N","CPLD_ALERT_N","BMC_RELOAD_N",
+			"P12V_PVDDQ_PMBUS_ALERT_N","BMC_JTAG_TCK_MUX_R_SEL","","NMI_OUT",
+			"NMI_BUTTON",
+	/*H0-H7*/	"BMC_CPLD_JTAG_TDI","BMC_CPLD_JTAG_TDO","BMC_CPLD_JTAG_TCK",
+			"BMC_CPLD_JTAG_TMS","FM_PROJECT_ID6","FM_BOARD_REV_ID0",
+			"PCA9546_U70_RST_N","IRQ_SML0_ALERT_N",
+	/*I0-I7*/	"FAULT_FRONT_RISER_P12V_N","FAULT_OCP_P12V_N","FM_BMC_PCH_SCI_R_N",
+			"","","","","",
+	/*J0-J7*/	"FM_CPU0_SKTOCC_N","FM_CPU1_SKTOCC_N","FM_CPU1_DISABLE_COD_N",
+			"","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"P12V_FAULT_N","PWRGD_P12V_PCIE_RISER","","LEAKAGE_DETECT_INPUT_N",
+			"","IRQ_SML1_PMBUS_ALERT_N","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","FM_PCH_THERMTRIP_N","CHASSIS_INTRUSION",
+	/*R0-R7*/	"","PVCCIN_CPU1_SMBALERT_N","BMC_PREQ_R_N","FAULT_P12V_PCIE_RISER_N",
+			"ALT_P12V_PCIE_RISER_N","BURN_BOARD_N","PVCCIN_CPU0_SMBALERT_N","",
+	/*S0-S7*/	"BMC_PRDY_N","SIO_POWER_GOOD","FM_BMC_PWR_DEBUG_R_N",
+			"FM_BMC_XDP_DEBUG_EN","","STRAP_BMC_BATTERY_GPIOS5","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","PWRGD_PSU0_PWROK","CPU1_PROCHOT_LVT3_N","IRQ_BMC_PCH_SMI_LPC_N",
+			"","","","",
+	/*Z0-Z7*/	"XDP_PRSNT_N","BMC_XDP_SYS_PWROK","BMC_XDP_JTAG_SEL",
+			"PCH_BMC_SMI_ACTIVE_R_N","","","","",
+	/*AA0-AA7*/	"PWRGD_P12V_STBY_OCP","PS_PWROK","RST_PLTRST_BMC_R_N","HDA_SDO_R",
+			"FM_SLPS4_R_N","PWRGD_PSU1_PWROK","POWER_BUTTON","POWER_OUT",
+	/*AB0-AB7*/	"","RESET_OUT","SPI_BIOS_MODE_SELECT","POST_COMPLETE","","","","",
+	/*AC0-AC7*/	"","","","","","","","CPLD_PLTRST_B_N";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xCA2>;
+	status = "okay";
+};
+
+&kcs4 {
+	aspeed,lpc-io-reg = <0xCA4>;
+	status = "okay";
+};
+
+&lpc_snoop {
+	snoop-ports = <0x80>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default
+			&pinctrl_nrts2_default
+			&pinctrl_ndtr2_default
+			&pinctrl_ndsr2_default
+			&pinctrl_ncts2_default
+			&pinctrl_ndcd2_default
+			&pinctrl_nri2_default>;
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_3_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_3_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_3_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_3_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	ipmb0@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	i2c-mux@72 {
+		compatible = "nxp,pca9548";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel_6_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_6_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_6_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_6_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+		channel_6_4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		channel_6_5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		channel_6_6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		channel_6_7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel_6_8: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			i2c-mux@71 {
+				compatible = "nxp,pca9546";
+				reg = <0x71>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel_6_12: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+				};
+
+				channel_6_13: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				channel_6_14: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				channel_6_15: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		 };
+
+		channel_6_9: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			i2c-mux@71 {
+				compatible = "nxp,pca9546";
+				reg = <0x71>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel_6_16: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+				};
+
+				channel_6_17: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				channel_6_18: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				channel_6_19: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		 };
+
+		channel_6_10: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			i2c-mux@71 {
+				compatible = "nxp,pca9546";
+				reg = <0x71>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel_6_20: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				channel_6_21: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				channel_6_22: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				channel_6_23: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		 };
+
+		channel_6_11: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			i2c-mux@71 {
+				compatible = "nxp,pca9546";
+				reg = <0x71>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel_6_24: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				channel_6_25: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			 };
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+	pca0:pca9555@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca1:pca9555@25 {
+		compatible = "nxp,pca9555";
+		reg = <0x25>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel_10_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_10_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_10_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_10_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel_10_4: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_10_5: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_10_6: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_10_7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+	};
+};
+
+&gpio {
+	pin-gpio-i3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "NCSI_BMC_R_SEL";
+	};
+
+	pin-gpio-b6-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "EN_NCSI_SWITCH_N";
+	};
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts
new file mode 100644
index 000000000000..cce8d0416dc8
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+#define EFUSE_OUTPUT(n)					\
+	efuse##n {					\
+		compatible = "regulator-output";	\
+		vout-supply = <&efuse##n>;		\
+	}
+
+#define __stringify(x) #x
+
+#define EFUSE(hexaddr, num)							\
+	efuse@##hexaddr {							\
+		compatible = "ti,lm25066";					\
+		reg = <0x##hexaddr>;						\
+		shunt-resistor-micro-ohms = <675>;				\
+		regulators {							\
+			efuse##num: vout {					\
+				regulator-name = __stringify(efuse##num##-reg);	\
+			};							\
+		};								\
+	}
+
+/{
+	model = "Delta Power AHE-50DC";
+	compatible = "delta,ahe50dc-bmc", "aspeed,ast2400";
+
+	aliases {
+		serial4 = &uart5;
+
+		/*
+		 * pca9541-arbitrated logical i2c buses are numbered as the
+		 * corresponding physical bus plus 20
+		 */
+		i2c20 = &i2carb0;
+		i2c21 = &i2carb1;
+		i2c22 = &i2carb2;
+		i2c23 = &i2carb3;
+		i2c24 = &i2carb4;
+		i2c26 = &i2carb6;
+		i2c27 = &i2carb7;
+		i2c28 = &i2carb8;
+		i2c32 = &i2carb12;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS2,115200n8 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x10000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		panic {
+			gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "panic";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+	};
+
+	EFUSE_OUTPUT(01);
+	EFUSE_OUTPUT(02);
+	EFUSE_OUTPUT(03);
+	EFUSE_OUTPUT(04);
+	EFUSE_OUTPUT(05);
+	EFUSE_OUTPUT(06);
+	EFUSE_OUTPUT(07);
+	EFUSE_OUTPUT(08);
+	EFUSE_OUTPUT(09);
+	EFUSE_OUTPUT(10);
+	EFUSE_OUTPUT(11);
+	EFUSE_OUTPUT(12);
+	EFUSE_OUTPUT(13);
+	EFUSE_OUTPUT(14);
+	EFUSE_OUTPUT(15);
+	EFUSE_OUTPUT(16);
+	EFUSE_OUTPUT(17);
+	EFUSE_OUTPUT(18);
+	EFUSE_OUTPUT(19);
+	EFUSE_OUTPUT(20);
+	EFUSE_OUTPUT(21);
+	EFUSE_OUTPUT(22);
+	EFUSE_OUTPUT(23);
+	EFUSE_OUTPUT(24);
+	EFUSE_OUTPUT(25);
+	EFUSE_OUTPUT(26);
+	EFUSE_OUTPUT(27);
+	EFUSE_OUTPUT(28);
+	EFUSE_OUTPUT(29);
+	EFUSE_OUTPUT(30);
+	EFUSE_OUTPUT(31);
+	EFUSE_OUTPUT(32);
+	EFUSE_OUTPUT(33);
+	EFUSE_OUTPUT(34);
+	EFUSE_OUTPUT(35);
+	EFUSE_OUTPUT(36);
+	EFUSE_OUTPUT(37);
+	EFUSE_OUTPUT(38);
+	EFUSE_OUTPUT(39);
+	EFUSE_OUTPUT(40);
+	EFUSE_OUTPUT(41);
+	EFUSE_OUTPUT(42);
+	EFUSE_OUTPUT(43);
+	EFUSE_OUTPUT(44);
+	EFUSE_OUTPUT(45);
+	EFUSE_OUTPUT(46);
+	EFUSE_OUTPUT(47);
+	EFUSE_OUTPUT(48);
+	EFUSE_OUTPUT(49);
+	EFUSE_OUTPUT(50);
+
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "flash0";
+		spi-max-frequency = <50000000>; // 50 MHz
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@79 {
+		compatible = "nxp,pca9541";
+		reg = <0x79>;
+
+		i2carb0: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* lm25066 efuses @ 10-17, 40-47, 50-57 */
+			EFUSE(10, 03);
+			EFUSE(11, 04);
+			EFUSE(12, 01);
+			EFUSE(13, 02);
+			EFUSE(14, 13);
+			EFUSE(15, 14);
+			EFUSE(16, 15);
+			EFUSE(17, 16);
+			EFUSE(40, 12);
+			EFUSE(41, 11);
+			EFUSE(42, 10);
+			EFUSE(43, 09);
+			EFUSE(44, 08);
+			EFUSE(45, 07);
+			EFUSE(46, 05);
+			EFUSE(47, 06);
+			EFUSE(50, 17);
+			EFUSE(51, 18);
+			EFUSE(52, 20);
+			EFUSE(53, 19);
+			EFUSE(54, 22);
+			EFUSE(55, 21);
+			EFUSE(56, 24);
+			EFUSE(57, 23);
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@72 {
+		compatible = "nxp,pca9541";
+		reg = <0x72>;
+
+		i2carb1: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@73 {
+		compatible = "nxp,pca9541";
+		reg = <0x73>;
+
+		i2carb2: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@74 {
+		compatible = "nxp,pca9541";
+		reg = <0x74>;
+
+		i2carb3: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@7a {
+		compatible = "nxp,pca9541";
+		reg = <0x7a>;
+
+		i2carb4: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@20 {
+				compatible = "nxp,pca9534";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			/* lm25066 efuses @ 10-17, 40-47, 50-57, 59, 5a */
+			EFUSE(10, 27);
+			EFUSE(11, 28);
+			EFUSE(12, 25);
+			EFUSE(13, 26);
+			EFUSE(14, 37);
+			EFUSE(15, 38);
+			EFUSE(16, 39);
+			EFUSE(17, 40);
+			EFUSE(40, 36);
+			EFUSE(41, 35);
+			EFUSE(42, 34);
+			EFUSE(43, 33);
+			EFUSE(44, 32);
+			EFUSE(45, 31);
+			EFUSE(46, 29);
+			EFUSE(47, 30);
+			EFUSE(50, 41);
+			EFUSE(51, 42);
+			EFUSE(52, 44);
+			EFUSE(53, 43);
+			EFUSE(54, 46);
+			EFUSE(55, 45);
+			EFUSE(56, 48);
+			EFUSE(57, 47);
+			EFUSE(59, 49);
+			EFUSE(5a, 50);
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@75 {
+		compatible = "nxp,pca9541";
+		reg = <0x75>;
+
+		i2carb6: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@76 {
+		compatible = "nxp,pca9541";
+		reg = <0x76>;
+
+		i2carb7: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@7c {
+		compatible = "nxp,pca9541";
+		reg = <0x7c>;
+
+		i2carb8: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fancontrol@30 {
+				compatible = "delta,ahe50dc-fan";
+				reg = <0x30>;
+			};
+
+			/* Baseboard FRU eeprom */
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@71 {
+		compatible = "nxp,pca9541";
+		reg = <0x71>;
+
+		i2carb12: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "", "", "", "", "", "", "", "",
+		/*  B */ "", "", "", "", "", "", "", "",
+		/*  C */ "RESET_PEER_N", "HEARTBEAT_OUT", "", "", "", "", "", "",
+		/*  D */ "", "", "", "", "", "", "", "",
+		/*  E */ "DOOM_N", "", "", "", "", "LED_PWR_BLUE", "", "",
+		/*  F */ "", "", "", "", "", "", "", "",
+		/*  G */ "", "", "", "", "", "", "", "",
+		/*  H */ "", "", "", "", "", "", "", "",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "", "", "BMC_ID", "", "", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "", "", "", "", "", "",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "LED_GREEN", "", "LED_RED", "", "", "", "", "",
+		/*  Q */ "", "", "", "", "", "", "", "",
+		/*  R */ "", "", "", "", "", "", "", "",
+		/*  S */ "", "", "", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "HEARTBEAT_IN", "BOARDREV0", "BOARDREV1", "",
+		/*  Z */ "", "", "", "", "", "", "", "",
+		/* AA */ "", "", "", "", "", "", "", "",
+		/* AB */ "", "", "", "";
+
+	/*
+	 * I don't rightly know what this GPIO really *is*, but setting it to
+	 * zero causes the fans to run at full speed, after which setting it
+	 * back to one causes a power output glitch, so install a hog to keep
+	 * it at one as a failsafe to ensure nothing accidentally touches it.
+	 */
+	doom-guardrail-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_LOW>;
+		output-low;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
new file mode 100644
index 000000000000..24969c82d05e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
@@ -0,0 +1,1090 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Bletchley BMC";
+	compatible = "facebook,bletchley-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		bootargs = "console=ttyS4,57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	spi1_gpio: spi1-gpio {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+
+	front_gpio_leds {
+		compatible = "gpio-leds";
+		sys_log_id {
+			default-state = "off";
+			gpios = <&front_leds 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fan_gpio_leds {
+		compatible = "gpio-leds";
+		fan0_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 8 GPIO_ACTIVE_HIGH>;
+		};
+		fan1_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 9 GPIO_ACTIVE_HIGH>;
+		};
+		fan2_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 10 GPIO_ACTIVE_HIGH>;
+		};
+		fan3_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 11 GPIO_ACTIVE_HIGH>;
+		};
+		fan0_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 12 GPIO_ACTIVE_HIGH>;
+		};
+		fan1_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 13 GPIO_ACTIVE_HIGH>;
+		};
+		fan2_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 14 GPIO_ACTIVE_HIGH>;
+		};
+		fan3_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sled1_gpio_leds {
+		compatible = "gpio-leds";
+		sled1_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled1_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled1_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled1_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled2_gpio_leds {
+		compatible = "gpio-leds";
+		sled2_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled2_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled2_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled2_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled3_gpio_leds {
+		compatible = "gpio-leds";
+		sled3_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled3_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled3_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled3_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled4_gpio_leds {
+		compatible = "gpio-leds";
+		sled4_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled4_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled4_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled4_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled5_gpio_leds {
+		compatible = "gpio-leds";
+		sled5_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled5_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled5_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled5_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled6_gpio_leds {
+		compatible = "gpio-leds";
+		sled6_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled6_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled6_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled6_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		presence-sled1 {
+			label = "presence-sled1";
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 2)>;
+		};
+		presence-sled2 {
+			label = "presence-sled2";
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 3)>;
+		};
+		presence-sled3 {
+			label = "presence-sled3";
+			gpios = <&gpio0 ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 4)>;
+		};
+		presence-sled4 {
+			label = "presence-sled4";
+			gpios = <&gpio0 ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 5)>;
+		};
+		presence-sled5 {
+			label = "presence-sled5";
+			gpios = <&gpio0 ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 6)>;
+		};
+		presence-sled6 {
+			label = "presence-sled6";
+			gpios = <&gpio0 ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 7)>;
+		};
+	};
+
+	vbus_sled1: vbus_sled1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled1_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled2: vbus_sled2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled2_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled3: vbus_sled3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled3";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled3_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled4: vbus_sled4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled4";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled4_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled5: vbus_sled5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled5";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled5_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled6: vbus_sled6 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled6";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled6_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled1_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED1_SWD_MUX", "SLED1_XRES_SWD_N",
+		"SLED1_CLKREQ_N", "SLED1_PCIE_PWR_EN";
+	};
+
+	sled1_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 0) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT",
+		"SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT",
+		"SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY",
+		"SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1";
+	};
+
+	sled1_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","SLED1_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled1_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 0) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled1>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled2_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED2_SWD_MUX", "SLED2_XRES_SWD_N",
+		"SLED2_CLKREQ_N", "SLED2_PCIE_PWR_EN";
+	};
+
+	sled2_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 1) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT",
+		"SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT",
+		"SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY",
+		"SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2";
+	};
+
+	sled2_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","SLED2_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled2_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 1) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled2>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled3_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED3_SWD_MUX", "SLED3_XRES_SWD_N",
+		"SLED3_CLKREQ_N", "SLED3_PCIE_PWR_EN";
+	};
+
+	sled3_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 2) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT",
+		"SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT",
+		"SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY",
+		"SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3";
+	};
+
+	sled3_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","SLED3_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled3_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled3>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled4_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED4_SWD_MUX", "SLED4_XRES_SWD_N",
+		"SLED4_CLKREQ_N", "SLED4_PCIE_PWR_EN";
+	};
+
+	sled4_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 3) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT",
+		"SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT",
+		"SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY",
+		"SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4";
+	};
+
+	sled4_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","SLED4_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled4_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(S, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled4>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled5_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED5_SWD_MUX", "SLED5_XRES_SWD_N",
+		"SLED5_CLKREQ_N", "SLED5_PCIE_PWR_EN";
+	};
+
+	sled5_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 4) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT",
+		"SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT",
+		"SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY",
+		"SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5";
+	};
+
+	sled5_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","SLED5_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled5_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(Y, 3) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled5>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled6_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED6_SWD_MUX", "SLED6_XRES_SWD_N",
+		"SLED6_CLKREQ_N", "SLED6_PCIE_PWR_EN";
+	};
+
+	sled6_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED6_MS_DETECT1","SLED6_VBUS_BMC_EN","SLED6_INA230_ALERT","SLED6_P12V_STBY_ALERT",
+		"SLED6_SSD_ALERT","SLED6_MS_DETECT0","SLED6_RST_CCG5","SLED6_FUSB302_INT",
+		"SLED6_MD_STBY_RESET","SLED6_MD_IOEXP_EN_FAULT","SLED6_MD_DIR","SLED6_MD_DECAY",
+		"SLED6_MD_MODE1","SLED6_MD_MODE2","SLED6_MD_MODE3","power-host6";
+	};
+
+	sled6_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled6-amber","led-sled6-blue","SLED6_RST_IOEXP","SLED6_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled6_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled6>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+
+	rtc@51 {
+		/* in-chip rtc disabled, use external rtc (battery-backed) */
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	front_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-fault-identify","power-p5v-stby-good",
+		"power-p1v0-dvdd-good","power-p1v0-avdd-good",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	adm1278@11 {
+		compatible = "adi,adm1278";
+		reg = <0x11>;
+		shunt-resistor-micro-ohms = <300>;
+		adi,volt-curr-sample-average = <128>;
+		adi,power-sample-average = <128>;
+	};
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+
+	tmp421@4d {
+		compatible = "ti,tmp421";
+		reg = <0x4d>;
+	};
+
+	fan_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"presence-fan0","presence-fan1",
+		"presence-fan2","presence-fan3",
+		"power-fan0-good","power-fan1-good",
+		"power-fan2-good","power-fan3-good",
+		"","","","",
+		"","","","";
+	};
+};
+
+&i2c13 {
+	multi-master;
+	aspeed,hw-timeout-ms = <1000>;
+	status = "okay";
+
+	//USB Debug Connector
+	ipmb13@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpiov2_unbiased_default>;
+
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"FUSB302_SLED1_INT_N","FUSB302_SLED2_INT_N",
+			"SEL_SPI2_MUX","SPI2_MUX1",
+			"SPI2_MUX2","SPI2_MUX3",
+			"","FUSB302_SLED3_INT_N",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"BMC_SLED1_STCK","BMC_SLED2_STCK",
+			"BMC_SLED3_STCK","BMC_SLED4_STCK",
+			"BMC_SLED5_STCK","BMC_SLED6_STCK",
+			"","",
+	/*G0-G7*/	"BSM_FRU_WP","SWITCH_FRU_MUX","","FM_SOL_UART_CH_SEL",
+			"PWRGD_P1V05_VDDCORE","PWRGD_P1V5_VDD","","",
+	/*H0-H7*/	"presence-riser1","presence-riser2",
+			"presence-sled1","presence-sled2",
+			"presence-sled3","presence-sled4",
+			"presence-sled5","presence-sled6",
+	/*I0-I7*/	"REV_ID0","",
+			"REV_ID1","REV_ID2",
+			"","BSM_FLASH_WP_STATUS",
+			"BMC_TPM_PRES_N","FUSB302_SLED6_INT_N",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","BMC_RTC_INT","","",
+	/*M0-M7*/	"ALERT_SLED1_N","ALERT_SLED2_N",
+			"ALERT_SLED3_N","ALERT_SLED4_N",
+			"ALERT_SLED5_N","ALERT_SLED6_N",
+			"","USB_DEBUG_PWR_BTN_N",
+	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
+			"LED_POSTCODE_2","LED_POSTCODE_3",
+			"LED_POSTCODE_4","LED_POSTCODE_5",
+			"LED_POSTCODE_6","LED_POSTCODE_7",
+	/*O0-O7*/	"","","","",
+			"","BOARD_ID0","BOARD_ID1","BOARD_ID2",
+	/*P0-P7*/	"","","","","","","","BMC_HEARTBEAT",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","BAT_DETECT",
+			"BMC_BT_WP0_N","BMC_BT_WP1_N","","FUSB302_SLED4_INT_N",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"PWRGD_CNS_PSU","RST_BMC_MVL_N",
+			"P12V_AUX_ALERT1_N","PSU_PRSNT",
+			"USB2_SEL0_A","USB2_SEL1_A",
+			"USB2_SEL0_B","USB2_SEL1_B",
+	/*W0-W7*/	"RST_FRONT_IOEXP_N","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"BMC_SELF_HW_RST","BSM_PRSNT_N",
+			"BSM_FLASH_LATCH_N","FUSB302_SLED5_INT_N",
+			"","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&adc0 {
+	vref = <1800>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&mdio0 {
+	status = "okay";
+	/* TODO: Add Marvell 88E6191X */
+};
+
+&mdio3 {
+	status = "okay";
+	/* TODO: Add Marvell 88X3310 */
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl_gpiov2_unbiased_default: gpiov2 {
+		pins = "AD14";
+		bias-disable;
+	};
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
new file mode 100644
index 000000000000..14dd0ab64130
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -0,0 +1,1222 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Catalina BMC";
+	compatible = "facebook,catalina-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		i2c16 = &i2c1mux0ch0;
+		i2c17 = &i2c1mux0ch1;
+		i2c18 = &i2c1mux0ch2;
+		i2c19 = &i2c1mux0ch3;
+		i2c20 = &i2c1mux0ch4;
+		i2c21 = &i2c1mux0ch5;
+		i2c22 = &i2c1mux0ch6;
+		i2c23 = &i2c1mux0ch7;
+		i2c24 = &i2c0mux0ch0;
+		i2c25 = &i2c0mux0ch1;
+		i2c26 = &i2c0mux0ch2;
+		i2c27 = &i2c0mux0ch3;
+		i2c28 = &i2c0mux1ch0;
+		i2c29 = &i2c0mux1ch1;
+		i2c30 = &i2c0mux1ch2;
+		i2c31 = &i2c0mux1ch3;
+		i2c32 = &i2c0mux2ch0;
+		i2c33 = &i2c0mux2ch1;
+		i2c34 = &i2c0mux2ch2;
+		i2c35 = &i2c0mux2ch3;
+		i2c36 = &i2c0mux3ch0;
+		i2c37 = &i2c0mux3ch1;
+		i2c38 = &i2c0mux3ch2;
+		i2c39 = &i2c0mux3ch3;
+		i2c40 = &i2c0mux4ch0;
+		i2c41 = &i2c0mux4ch1;
+		i2c42 = &i2c0mux4ch2;
+		i2c43 = &i2c0mux4ch3;
+		i2c44 = &i2c0mux5ch0;
+		i2c45 = &i2c0mux5ch1;
+		i2c46 = &i2c0mux5ch2;
+		i2c47 = &i2c0mux5ch3;
+		i2c48 = &i2c5mux0ch0;
+		i2c49 = &i2c5mux0ch1;
+		i2c50 = &i2c5mux0ch2;
+		i2c51 = &i2c5mux0ch3;
+		i2c52 = &i2c5mux0ch4;
+		i2c53 = &i2c5mux0ch5;
+		i2c54 = &i2c5mux0ch6;
+		i2c55 = &i2c5mux0ch7;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	spi1_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "bmc_ready_noled";
+			gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+
+		led-3 {
+			label = "bmc_ready_cpld_noled";
+			gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+	};
+
+	p1v8_bmc_aux: regulator-p1v8-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8_bmc_aux";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	p2v5_bmc_aux: regulator-p2v5-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p2v5_bmc_aux";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi3_default>;
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi4_default>;
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	multi-master;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c0mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			mctp-controller;
+
+			// IOB0 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+		i2c0mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c0mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			mctp-controller;
+
+			// IOB0 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+		i2c0mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux1ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c0mux1ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// IO Mezz 0 IOEXP
+			io_expander7: gpio@20 {
+				compatible = "nxp,pca9535";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			// IO Mezz 0 FRU EEPROM
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+		i2c0mux1ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c0mux1ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9546";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux2ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c0mux2ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c0mux2ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c0mux2ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9546";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c0mux3ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			mctp-controller;
+
+			// IOB1 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+		i2c0mux3ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c0mux3ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			mctp-controller;
+
+			// IOB1 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+		i2c0mux3ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9546";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux4ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c0mux4ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// IO Mezz 1 IOEXP
+			io_expander8: gpio@21 {
+				compatible = "nxp,pca9535";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			// IO Mezz 1 FRU EEPROM
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+		i2c0mux4ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c0mux4ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux5ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c0mux5ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c0mux5ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c0mux5ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c1mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			power-sensor@22 {
+				compatible = "mps,mp5990";
+				reg = <0x22>;
+			};
+		};
+		i2c1mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		i2c1mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			fanctl2: fan-controller@1 {
+				compatible = "nuvoton,nct7363";
+				reg = <0x01>;
+				#pwm-cells = <2>;
+
+				fan-9 {
+					pwms = <&fanctl2 0 40000>;
+					tach-ch = /bits/ 8 <0x09>;
+				};
+				fan-11 {
+					pwms = <&fanctl2 0 40000>;
+					tach-ch = /bits/ 8 <0x0b>;
+				};
+				fan-10 {
+					pwms = <&fanctl2 4 40000>;
+					tach-ch = /bits/ 8 <0x0a>;
+				};
+				fan-13 {
+					pwms = <&fanctl2 4 40000>;
+					tach-ch = /bits/ 8 <0x0d>;
+				};
+				fan-15 {
+					pwms = <&fanctl2 6 40000>;
+					tach-ch = /bits/ 8 <0x0f>;
+				};
+				fan-1 {
+					pwms = <&fanctl2 6 40000>;
+					tach-ch = /bits/ 8 <0x01>;
+				};
+				fan-0 {
+					pwms = <&fanctl2 10 40000>;
+					tach-ch = /bits/ 8 <0x00>;
+				};
+				fan-3 {
+					pwms = <&fanctl2 10 40000>;
+					tach-ch = /bits/ 8 <0x03>;
+				};
+			};
+			fanctl3: fan-controller@2 {
+				compatible = "nuvoton,nct7363";
+				reg = <0x02>;
+				#pwm-cells = <2>;
+
+				fan-9 {
+					pwms = <&fanctl3 0 40000>;
+					tach-ch = /bits/ 8 <0x09>;
+				};
+				fan-11 {
+					pwms = <&fanctl3 0 40000>;
+					tach-ch = /bits/ 8 <0x0b>;
+				};
+				fan-10 {
+					pwms = <&fanctl3 4 40000>;
+					tach-ch = /bits/ 8 <0x0a>;
+				};
+				fan-13 {
+					pwms = <&fanctl3 4 40000>;
+					tach-ch = /bits/ 8 <0x0d>;
+				};
+				fan-15 {
+					pwms = <&fanctl3 6 40000>;
+					tach-ch = /bits/ 8 <0x0f>;
+				};
+				fan-1 {
+					pwms = <&fanctl3 6 40000>;
+					tach-ch = /bits/ 8 <0x01>;
+				};
+				fan-0 {
+					pwms = <&fanctl3 10 40000>;
+					tach-ch = /bits/ 8 <0x00>;
+				};
+				fan-3 {
+					pwms = <&fanctl3 10 40000>;
+					tach-ch = /bits/ 8 <0x03>;
+				};
+			};
+			fanctl0: fan-controller@21 {
+				compatible = "maxim,max31790";
+				reg = <0x21>;
+			};
+			fanctl1: fan-controller@27 {
+				compatible = "maxim,max31790";
+				reg = <0x27>;
+			};
+		};
+		i2c1mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		i2c1mux0ch4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			power-monitor@13 {
+				compatible = "infineon,xdp710";
+				reg = <0x13>;
+			};
+			power-monitor@1c {
+				compatible = "infineon,xdp710";
+				reg = <0x1c>;
+			};
+			power-monitor@42 {
+				compatible = "lltc,ltc4287";
+				reg = <0x42>;
+				shunt-resistor-micro-ohms = <100>;
+			};
+			power-monitor@43 {
+				compatible = "lltc,ltc4287";
+				reg = <0x43>;
+				shunt-resistor-micro-ohms = <100>;
+			};
+		};
+		i2c1mux0ch5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+
+			// PDB FRU EEPROM
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+
+			// PDB TEMP SENSOR
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+		};
+		i2c1mux0ch6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+
+			// PDB IOEXP
+			io_expander5: gpio@27 {
+				compatible = "nxp,pca9554";
+				reg = <0x27>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			// OSFP IOEXP
+			io_expander6: gpio@25 {
+				compatible = "nxp,pca9555";
+				reg = <0x25>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			// OSFP FRU EEPROM
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+		i2c1mux0ch7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+
+			// FIO FRU EEPROM
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			// FIO TEMP SENSOR
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			// FIO REMOTE TEMP SENSOR
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	// Module 0 IOEXP
+	io_expander0: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// Module 1 IOEXP
+	io_expander1: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// HMC IOEXP
+	io_expander2: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// Module 0 EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// Module 1 EEPROM
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c5mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c5mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c5mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+		i2c5mux0ch4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+		i2c5mux0ch5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+		i2c5mux0ch6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			// HDD FRU EEPROM
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+		i2c5mux0ch7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	// BMC IOEXP on Module 0
+	io_expander3: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	rtc@6f {
+		compatible = "nuvoton,nct3018y";
+		reg = <0x6f>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	// SCM CPLD IOEXP
+	io_expander4: gpio@4f {
+		compatible = "nxp,pca9555";
+		reg = <0x4f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// SCM TEMP SENSOR
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	// SCM FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// BSM FRU EEPROM
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC0 TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC0 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	multi-master;
+
+	// Module 1 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// Secondary CBC FRU EEPROM
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+	multi-master;
+
+	// Module 0 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// Primary CBC FRU EEPROM
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
+
+	// HMC FRU EEPROM
+	eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	// PDB CPLD IOEXP 0x10
+	io_expander9: gpio@10 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x10>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x11
+	io_expander10: gpio@11 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x11>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x12
+	io_expander11: gpio@12 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x13
+	io_expander12: gpio@13 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x13>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x14
+	io_expander13: gpio@14 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x14>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x15
+	io_expander14: gpio@15 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x15>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC1 TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC1 FRU EEPROM
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&adc0 {
+	vref-supply = <&p1v8_bmc_aux>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref-supply = <&p2v5_bmc_aux>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&pinctrl {
+	pinctrl_ncsi3_default: ncsi3_default {
+		function = "RMII3";
+		groups = "NCSI3";
+	};
+
+	pinctrl_ncsi4_default: ncsi4_default {
+		function = "RMII4";
+		groups = "NCSI4";
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BATTERY_DETECT","PRSNT1_HPM_SCM_N",
+			"BMC_I2C1_FPGA_ALERT_L","BMC_READY",
+			"IOEXP_INT_L","FM_ID_LED",
+			"","",
+	/*C0-C7*/	"","","","",
+			"PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N",
+			"","BMC_I2C_SSIF_ALERT_L",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","",
+			"FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+	/*H0-H7*/	"PWR_BRAKE_L","RUN_POWER_EN",
+			"SHDN_FORCE_L","SHDN_REQ_L",
+			"","","","",
+	/*I0-I7*/	"","","","",
+			"","FLASH_WP_STATUS",
+			"FM_PDB_HEALTH_N","RUN_POWER_PG",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"PCIE_EP_RST_EN","BMC_FRU_WP",
+			"SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN",
+			"STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","",
+	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
+			"LED_POSTCODE_2","LED_POSTCODE_3",
+			"LED_POSTCODE_4","LED_POSTCODE_5",
+			"LED_POSTCODE_6","LED_POSTCODE_7",
+	/*O0-O7*/	"HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC",
+			"CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N",
+			"PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N",
+			"","USBDBG_IPMI_EN_L",
+	/*P0-P7*/	"PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L",
+			"ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N",
+			"host0-ready","BMC_READY_CPLD","","BMC_HEARTBEAT_N",
+	/*Q0-Q7*/	"IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N",
+			"UART_MUX_SEL","I2C_MUX_RESET_L",
+			"RSVD_NV_PLT_DETECT","SPI_TPM_INT_L",
+			"CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L",
+	/*R0-R7*/	"THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L",
+			"CPU_BOOT_DONE","PMBUS_GNT_L",
+			"CHASSIS_PWR_BRK_L","PCIE_WAKE_L",
+			"PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L",
+	/*S0-S7*/	"","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N",
+			"FM_BMC_DEBUG_SW_N","UID_LED_N",
+			"SYS_FAULT_LED_N","RUN_POWER_FAULT_L",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L",
+			"BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L",
+			"SMB_BMC_TMP_ALERT","PWR_LED_N",
+			"SYS_RST_OUT_L","IRQ_TPM_SPI_N",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","RST_BMC_SELF_HW",
+			"FM_FLASH_LATCH_N","BMC_EMMC_RST_N",
+			"","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&io_expander0 {
+	gpio-line-names =
+		"FPGA_THERM_OVERT_L","FPGA_READY_BMC",
+		"HMC_BMC_DETECT","HMC_PGOOD",
+		"","BMC_SELF_PWR_CYCLE",
+		"FPGA_EROT_FATAL_ERROR_L","WP_HW_EXT_CTRL_L",
+		"EROT_FPGA_RST_L","FPGA_EROT_RECOVERY_L",
+		"BMC_EROT_FPGA_SPI_MUX_SEL","USB2_HUB_RESET_L",
+		"NCSI_CS1_SEL","SGPIO_EN_L",
+		"B2B_IOEXP_INT_L","I2C_BUS_MUX_RESET_L";
+};
+
+&io_expander1 {
+	gpio-line-names =
+		"SEC_FPGA_THERM_OVERT_L","SEC_FPGA_READY_BMC",
+		"","",
+		"","",
+		"SEC_FPGA_EROT_FATAL_ERROR_L","SEC_WP_HW_EXT_CTRL_L",
+		"SEC_EROT_FPGA_RST_L","SEC_FPGA_EROT_RECOVERY_L",
+		"SEC_BMC_EROT_FPGA_SPI_MUX_SEL","",
+		"","",
+		"","SEC_I2C_BUS_MUX_RESET_L";
+};
+
+&io_expander2 {
+	gpio-line-names =
+		"HMC_PRSNT_L","HMC_READY",
+		"HMC_EROT_FATAL_ERROR_L","I2C_MUX_SEL",
+		"HMC_EROT_SPI_MUX_SEL","HMC_EROT_RECOVERY_L",
+		"HMC_EROT_RST_L","GLOBAL_WP_HMC",
+		"FPGA_RST_L","USB2_HUB_RST",
+		"CPU_UART_MUX_SEL","",
+		"","","","";
+};
+
+&io_expander3 {
+	gpio-line-names =
+		"RTC_MUX_SEL","PCI_MUX_SEL","TPM_MUX_SEL","FAN_MUX-SEL",
+		"SGMII_MUX_SEL","DP_MUX_SEL","UPHY3_USB_SEL","NCSI_MUX_SEL",
+		"BMC_PHY_RST","RTC_CLR_L","BMC_12V_CTRL","PS_RUN_IO0_PG",
+		"","","","";
+};
+
+&io_expander4 {
+	gpio-line-names =
+		"stby_power_en_cpld","stby_power_gd_cpld","","",
+		"","","","",
+		"","","","",
+		"","","","";
+};
+
+&io_expander5 {
+	gpio-line-names =
+		"JTAG_MUX_SEL","IOX_BMC_RESET","","",
+		"","","","";
+};
+
+&io_expander6 {
+	gpio-line-names =
+		"OSFP_PHASE_ID0","OSFP_PHASE_ID1",
+		"OSFP_PHASE_ID2","OSFP_PHASE_ID3",
+		"","","","",
+		"OSFP_BOARD_ID0","OSFP_BOARD_ID1",
+		"OSFP_BOARD_ID2","PWRGD_P3V3_N1",
+		"PWRGD_P3V3_N2","","","";
+};
+
+&io_expander7 {
+	gpio-line-names =
+		"RST_CX7_0","RST_CX7_1",
+		"CX0_SSD0_PRSNT_L","CX1_SSD1_PRSNT_L",
+		"CX_BOOT_CMPLT_CX0","CX_BOOT_CMPLT_CX1",
+		"CX_TWARN_CX0_L","CX_TWARN_CX1_L",
+		"CX_OVT_SHDN_CX0","CX_OVT_SHDN_CX1",
+		"FNP_L_CX0","FNP_L_CX1",
+		"","MCU_GPIO","MCU_RST_N","MCU_RECOVERY_N";
+};
+
+&io_expander8 {
+	gpio-line-names =
+		"SEC_RST_CX7_0","SEC_RST_CX7_1",
+		"SEC_CX0_SSD0_PRSNT_L","SEC_CX1_SSD1_PRSNT_L",
+		"SEC_CX_BOOT_CMPLT_CX0","SEC_CX_BOOT_CMPLT_CX1",
+		"SEC_CX_TWARN_CX0_L","SEC_CX_TWARN_CX1_L",
+		"SEC_CX_OVT_SHDN_CX0","SEC_CX_OVT_SHDN_CX1",
+		"SEC_FNP_L_CX0","SEC_FNP_L_CX1",
+		"","SEC_MCU_GPIO","SEC_MCU_RST_N","SEC_MCU_RECOVERY_N";
+};
+
+&io_expander9 {
+	gpio-line-names =
+		"LEAK3_DETECT_R","LEAK1_DETECT_R",
+		"LEAK2_DETECT_R","LEAK0_DETECT_R",
+		"CHASSIS3_LEAK_Q_N_PLD","CHASSIS1_LEAK_Q_N_PLD",
+		"CHASSIS2_LEAK_Q_N_PLD","CHASSIS0_LEAK_Q_N_PLD",
+		"P12V_AUX_FAN_ALERT_PLD_N","P12V_AUX_FAN_OC_PLD_N",
+		"P12V_AUX_FAN_FAULT_PLD_N","LEAK_DETECT_RMC_N_R",
+		"RSVD_RMC_GPIO3_R","SMB_RJ45_FIO_TMP_ALERT",
+		"","";
+};
+
+&io_expander10 {
+	gpio-line-names =
+		"FM_P12V_NIC1_FLTB_R_N","FM_P3V3_NIC1_FAULT_R_N",
+		"OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N",
+		"P12V_AUX_NIC1_SENSE_ALERT_R_N",
+		"FM_P12V_NIC0_FLTB_R_N","FM_P3V3_NIC0_FAULT_R_N",
+		"OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N",
+		"P12V_AUX_NIC0_SENSE_ALERT_R_N",
+		"P12V_AUX_PSU_SMB_ALERT_R_L","P12V_SCM_SENSE_ALERT_R_N",
+		"NODEB_PSU_SMB_ALERT_R_L","NODEA_PSU_SMB_ALERT_R_L",
+		"P52V_SENSE_ALERT_PLD_N","P48V_HS2_FAULT_N_PLD",
+		"P48V_HS1_FAULT_N_PLD","";
+};
+
+&io_expander11 {
+	gpio-line-names =
+		"FAN_7_PRESENT_N","FAN_6_PRESENT_N",
+		"FAN_5_PRESENT_N","FAN_4_PRESENT_N",
+		"FAN_3_PRESENT_N","FAN_2_PRESENT_N",
+		"FAN_1_PRESENT_N","FAN_0_PRESENT_N",
+		"PRSNT_CHASSIS3_LEAK_CABLE_R_N","PRSNT_CHASSIS1_LEAK_CABLE_R_N",
+		"PRSNT_CHASSIS2_LEAK_CABLE_R_N","PRSNT_CHASSIS0_LEAK_CABLE_R_N",
+		"PRSNT_RJ45_FIO_N_R","PRSNT_HDDBD_POWER_CABLE_N",
+		"PRSNT_OSFP_POWER_CABLE_N","";
+};
+
+&io_expander12 {
+	gpio-line-names =
+		"RST_OCP_V3_1_R_N","NIC0_PERST_N",
+		"OCP_SFF_PERST_FROM_HOST_ISO_PLD_N","OCP_SFF_MAIN_PWR_EN",
+		"FM_OCP_SFF_PWR_GOOD_PLD","OCP_SFF_AUX_PWR_PLD_EN_R",
+		"HP_LVC3_OCP_V3_1_PWRGD_PLD","HP_OCP_V3_1_HSC_PWRGD_PLD_R",
+		"RST_OCP_V3_2_R_N","NIC1_PERST_N",
+		"OCP_V3_2_PERST_FROM_HOST_ISO_PLD_N","OCP_V3_2_MAIN_PWR_EN",
+		"FM_OCP_V3_2_PWR_GOOD_PLD","OCP_V3_2_AUX_PWR_PLD_EN_R",
+		"HP_LVC3_OCP_V3_2_PWRGD_PLD","HP_OCP_V3_2_HSC_PWRGD_PLD_R";
+};
+
+&io_expander13 {
+	gpio-line-names =
+		"NODEA_NODEB_PWOK_PLD_ISO_R","PWR_EN_NICS",
+		"PWRGD_P12V_AUX_FAN_PLD","P12V_AUX_FAN_EN_PLD",
+		"PWRGD_P3V3_AUX_PLD","PWRGD_P12V_AUX_PLD_ISO_R",
+		"FM_MAIN_PWREN_FROM_RMC_R","FM_MAIN_PWREN_RMC_EN_ISO_R",
+		"PWRGD_RMC_R","PWRGD_P12V_AUX_FAN_PLD",
+		"P12V_AUX_FAN_EN_PLD","FM_SYS_THROTTLE_N",
+		"HP_LVC3_OCP_V3_2_PRSNT2_PLD_N","HP_LVC3_OCP_V3_1_PRSNT2_PLD_N",
+		"","";
+};
+
+&io_expander14 {
+	gpio-line-names =
+		"","","","","","","","",
+		"FM_BOARD_BMC_SKU_ID3","FM_BOARD_BMC_SKU_ID2",
+		"FM_BOARD_BMC_SKU_ID1","FM_BOARD_BMC_SKU_ID0",
+		"FAB_BMC_REV_ID2","FAB_BMC_REV_ID1",
+		"FAB_BMC_REV_ID0","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
new file mode 100644
index 000000000000..450446913e36
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
@@ -0,0 +1,1290 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Clemente BMC";
+	compatible = "facebook,clemente-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		i2c16 = &i2c1mux0ch0;
+		i2c17 = &i2c1mux0ch1;
+		i2c18 = &i2c1mux0ch2;
+		i2c19 = &i2c1mux0ch3;
+		i2c20 = &i2c1mux0ch4;
+		i2c21 = &i2c1mux0ch5;
+		i2c22 = &i2c1mux0ch6;
+		i2c23 = &i2c1mux0ch7;
+		i2c24 = &i2c0mux0ch0;
+		i2c25 = &i2c0mux0ch1;
+		i2c26 = &i2c0mux0ch2;
+		i2c27 = &i2c0mux0ch3;
+		i2c28 = &i2c0mux1ch0;
+		i2c29 = &i2c0mux1ch1;
+		i2c30 = &i2c0mux1ch2;
+		i2c31 = &i2c0mux1ch3;
+		i2c32 = &i2c0mux2ch0;
+		i2c33 = &i2c0mux2ch1;
+		i2c34 = &i2c0mux2ch2;
+		i2c35 = &i2c0mux2ch3;
+		i2c36 = &i2c0mux3ch0;
+		i2c37 = &i2c0mux3ch1;
+		i2c38 = &i2c0mux3ch2;
+		i2c39 = &i2c0mux3ch3;
+		i2c40 = &i2c0mux4ch0;
+		i2c41 = &i2c0mux4ch1;
+		i2c42 = &i2c0mux4ch2;
+		i2c43 = &i2c0mux4ch3;
+		i2c44 = &i2c0mux5ch0;
+		i2c45 = &i2c0mux5ch1;
+		i2c46 = &i2c0mux5ch2;
+		i2c47 = &i2c0mux5ch3;
+		i2c48 = &i2c0mux0ch1mux0ch0;
+		i2c49 = &i2c0mux0ch1mux0ch1;
+		i2c50 = &i2c0mux0ch1mux0ch2;
+		i2c51 = &i2c0mux0ch1mux0ch3;
+		i2c52 = &i2c0mux3ch1mux0ch0;
+		i2c53 = &i2c0mux3ch1mux0ch1;
+		i2c54 = &i2c0mux3ch1mux0ch2;
+		i2c55 = &i2c0mux3ch1mux0ch3;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "bmc_ready_noled";
+			gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+
+		led-3 {
+			label = "bmc_ready_cpld_noled";
+			gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+
+		led-hdd {
+			label = "hdd_led";
+			gpios = <&io_expander13 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	p1v8_bmc_aux: regulator-p1v8-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8_bmc_aux";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	p2v5_bmc_aux: regulator-p2v5-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p2v5_bmc_aux";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xbb000000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>;
+		};
+	};
+
+	spi1_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&adc0 {
+	vref-supply = <&p1v8_bmc_aux>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref-supply = <&p2v5_bmc_aux>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BATTERY_DETECT","PRSNT1_HPM_SCM_N",
+			"BMC_I2C1_FPGA_ALERT_L","BMC_READY",
+			"IOEXP_INT_L","FM_ID_LED",
+			"","",
+	/*C0-C7*/	"BMC_GPIOC0","","","",
+			"PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N",
+			"","BMC_I2C_SSIF_ALERT_L",
+	/*D0-D7*/	"","","","","BMC_GPIOD4","","","",
+	/*E0-E7*/	"BMC_GPIOE0","BMC_GPIOE1","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","",
+			"FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+	/*H0-H7*/	"PWR_BRAKE_L","RUN_POWER_EN",
+			"SHDN_FORCE_L","SHDN_REQ_L",
+			"","","","",
+	/*I0-I7*/	"","","","",
+			"","FLASH_WP_STATUS",
+			"FM_PDB_HEALTH_N","RUN_POWER_PG",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"PCIE_EP_RST_EN","BMC_FRU_WP",
+			"SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN",
+			"STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","",
+	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
+			"LED_POSTCODE_2","LED_POSTCODE_3",
+			"LED_POSTCODE_4","LED_POSTCODE_5",
+			"LED_POSTCODE_6","LED_POSTCODE_7",
+	/*O0-O7*/	"HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC",
+			"CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N",
+			"PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N",
+			"","USBDBG_IPMI_EN_L",
+	/*P0-P7*/	"PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L",
+			"ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N",
+			"host0-ready","BMC_READY_CPLD","BMC_GPIOP6","BMC_HEARTBEAT_N",
+	/*Q0-Q7*/	"IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N",
+			"UART_MUX_SEL","I2C_MUX_RESET_L",
+			"RSVD_NV_PLT_DETECT","SPI_TPM_INT_L",
+			"CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L",
+	/*R0-R7*/	"THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L",
+			"CPU_BOOT_DONE","PMBUS_GNT_L",
+			"CHASSIS_PWR_BRK_L","PCIE_WAKE_L",
+			"PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L",
+	/*S0-S7*/	"","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N",
+			"FM_BMC_DEBUG_SW_N","UID_LED_N",
+			"SYS_FAULT_LED_N","RUN_POWER_FAULT_L",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L",
+			"BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L",
+			"SMB_BMC_TMP_ALERT","PWR_LED_N",
+			"SYS_RST_OUT_L","IRQ_TPM_SPI_N",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","RST_BMC_SELF_HW",
+			"FM_FLASH_LATCH_N","BMC_EMMC_RST_N",
+			"BMC_GPIOY4","BMC_GPIOY5","","",
+	/*Z0-Z7*/	"","","","","","","BMC_GPIOZ6","BMC_GPIOZ7";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B3*/	"","","","",
+	/*18B4-18B7*/	"FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1","FM_BOARD_BMC_REV_ID2","",
+	/*18C0-18C7*/	"","","PI_BMC_BIOS_ROM_IRQ0_N","","","","","",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"","","","AC_PWR_BMC_BTN_N","","","","";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// HDD FRU EEPROM
+			eeprom@56 {
+				compatible = "atmel,24c128";
+				reg = <0x56>;
+			};
+
+			// E1.S Backplane
+			i2c0mux0ch1mux0: i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				reg = <0x74>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c0mux0ch1mux0ch0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c0mux0ch1mux0ch1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c0mux0ch1mux0ch2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c0mux0ch1mux0ch3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		i2c0mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux1ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux1ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// IO Mezz 0 IOEXP
+			io_expander7: gpio@20 {
+				compatible = "nxp,pca9535";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"RST_CX7_0",
+					"RST_CX7_1",
+					"CX0_SSD0_PRSNT_L",
+					"CX1_SSD1_PRSNT_L",
+					"CX_BOOT_CMPLT_CX0",
+					"CX_BOOT_CMPLT_CX1",
+					"CX_TWARN_CX0_L",
+					"CX_TWARN_CX1_L",
+					"CX_OVT_SHDN_CX0",
+					"CX_OVT_SHDN_CX1",
+					"FNP_L_CX0",
+					"FNP_L_CX1",
+					"",
+					"MCU_GPIO",
+					"MCU_RST_N",
+					"MCU_RECOVERY_N";
+			};
+
+			// IO Mezz 0 FRU EEPROM
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			// OSFP 0 FRU EEPROM
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+		};
+
+		i2c0mux1ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux1ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9546";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux2ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			// IOB0 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		i2c0mux2ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c0mux2ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux2ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			// IOB0 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9546";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux3ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux3ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// E1.S Backplane HDD FRU EEPROM
+			eeprom@56 {
+				compatible = "atmel,24c128";
+				reg = <0x56>;
+			};
+
+			// E1.S Backplane MUX
+			i2c0mux3ch1mux0: i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				reg = <0x74>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c0mux3ch1mux0ch0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c0mux3ch1mux0ch1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c0mux3ch1mux0ch2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c0mux3ch1mux0ch3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		i2c0mux3ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux3ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9546";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux4ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux4ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// IO Mezz 1 IOEXP
+			io_expander8: gpio@21 {
+				compatible = "nxp,pca9535";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"SEC_RST_CX7_0",
+					"SEC_RST_CX7_1",
+					"SEC_CX0_SSD0_PRSNT_L",
+					"SEC_CX1_SSD1_PRSNT_L",
+					"SEC_CX_BOOT_CMPLT_CX0",
+					"SEC_CX_BOOT_CMPLT_CX1",
+					"SEC_CX_TWARN_CX0_L",
+					"SEC_CX_TWARN_CX1_L",
+					"SEC_CX_OVT_SHDN_CX0",
+					"SEC_CX_OVT_SHDN_CX1",
+					"SEC_FNP_L_CX0",
+					"SEC_FNP_L_CX1",
+					"",
+					"SEC_MCU_GPIO",
+					"SEC_MCU_RST_N",
+					"SEC_MCU_RECOVERY_N";
+			};
+
+			// IO Mezz 1 FRU EEPROM
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			// OSFP 1 FRU EEPROM
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+		};
+
+		i2c0mux4ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux4ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux5ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			// IOB1 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		i2c0mux5ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c0mux5ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux5ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			// IOB1 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	// PDB
+	power-monitor@12 {
+		compatible = "ti,lm5066i";
+		reg = <0x12>;
+		shunt-resistor-micro-ohms = <183>;
+	};
+
+	// PDB
+	power-monitor@14 {
+		compatible = "ti,lm5066i";
+		reg = <0x14>;
+		shunt-resistor-micro-ohms = <183>;
+	};
+
+	// Module 0
+	fanctl0: fan-controller@20{
+		compatible = "maxim,max31790";
+		reg = <0x20>;
+	};
+
+	// Module 0
+	fanctl1: fan-controller@23{
+		compatible = "maxim,max31790";
+		reg = <0x23>;
+	};
+
+	// Module 1
+	fanctl2: fan-controller@2c{
+		compatible = "maxim,max31790";
+		reg = <0x2c>;
+	};
+
+	// Module 1
+	fanctl3: fan-controller@2f{
+		compatible = "maxim,max31790";
+		reg = <0x2f>;
+	};
+
+	// Module 0 Leak Sensor
+	adc@34 {
+		compatible = "maxim,max1363";
+		reg = <0x34>;
+	};
+
+	// Module 1 Leak Sensor
+	adc@35 {
+		compatible = "maxim,max1363";
+		reg = <0x35>;
+	};
+
+	// PDB TEMP SENSOR
+	temperature-sensor@4e {
+		compatible = "ti,tmp1075";
+		reg = <0x4e>;
+	};
+
+	// PDB FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	// PDB
+	vrm@60 {
+		compatible = "renesas,raa228004";
+		reg = <0x60>;
+	};
+
+	// PDB
+	vrm@61 {
+		compatible = "renesas,raa228004";
+		reg = <0x61>;
+	};
+
+	// Interposer
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c1mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		i2c1mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+
+		i2c1mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+
+		i2c1mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+		i2c1mux0ch4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		i2c1mux0ch5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+
+			// Interposer TEMP SENSOR
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+
+			// Interposer FRU EEPROM
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+		};
+
+		i2c1mux0ch6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+
+			// Interposer IOEXP
+			io_expander5: gpio@27 {
+				compatible = "nxp,pca9554";
+				reg = <0x27>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"JTAG_MUX_SEL",
+					"IOX_BMC_RESET",
+					"RTC_CLR_L",
+					"RTC_U77_ALRT_N",
+					"",
+					"PSU_ALERT_N",
+					"",
+					"RST_P12V_STBY_N";
+			};
+		};
+
+		i2c1mux0ch7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+
+			// FIO TEMP SENSOR
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			// FIO FRU EEPROM
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	// Module 0, Expander @0x20
+	io_expander0: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"FPGA_THERM_OVERT_L-I",
+			"FPGA_READY_BMC-I",
+			"HMC_BMC_DETECT-O",
+			"HMC_PGOOD-O",
+			"",
+			"BMC_STBY_CYCLE-O",
+			"FPGA_EROT_FATAL_ERROR_L-I",
+			"WP_HW_EXT_CTRL_L-O",
+			"EROT_FPGA_RST_L-O",
+			"FPGA_EROT_RECOVERY_L-O",
+			"BMC_EROT_FPGA_SPI_MUX_SEL-O",
+			"USB2_HUB_RST_L-O",
+			"",
+			"SGPIO_EN_L-O",
+			"B2B_IOEXP_INT_L-I",
+			"I2C_BUS_MUX_RESET_L-O";
+	};
+
+	// Module 1, Expander @0x21
+	io_expander1: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"SEC_FPGA_THERM_OVERT_L",
+			"SEC_FPGA_READY_BMC",
+			"SEC_HMC_BMC_DETECT",
+			"SEC_HMC_PGOOD",
+			"",
+			"SEC_BMC_SELF_POWER_CYCLE",
+			"SEC_SEC_FPGA_EROT_FATAL_ERROR_L",
+			"SEC_WP_HW_EXT_CTRL_L",
+			"SEC_EROT_FPGA_RST_L",
+			"SEC_FPGA_EROT_RECOVERY_L",
+			"SEC_BMC_EROT_FPGA_SPI_MUX_SEL",
+			"SEC_USB2_HUB_RST_L",
+			"",
+			"SEC_SGPIO_EN_L",
+			"SEC_IOB_IOEXP_INT_L",
+			"SEC_I2C_BUS_MUX_RESET_L";
+	};
+
+	// HMC Expander @0x27
+	io_expander2: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"HMC_PRSNT_L-I",
+			"HMC_READY-I",
+			"HMC_EROT_FATAL_ERROR_L-I",
+			"I2C_MUX_SEL-O",
+			"HMC_EROT_SPI_MUX_SEL-O",
+			"HMC_EROT_RECOVERY_L-O",
+			"HMC_EROT_RST_L-O",
+			"GLOBAL_WP_HMC-O",
+			"FPGA_RST_L-O",
+			"USB2_HUB_RST-O",
+			"CPU_UART_MUX_SEL-O",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	// Module 0 Aux EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// Module 1 Aux EEPROM
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	io_expander3: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"RTC_MUX_SEL",
+			"PCI_MUX_SEL",
+			"TPM_MUX_SEL",
+			"FAN_MUX-SEL",
+			"SGMII_MUX_SEL",
+			"DP_MUX_SEL",
+			"UPHY3_USB_SEL",
+			"NCSI_MUX_SEL",
+			"BMC_PHY_RST",
+			"RTC_CLR_L",
+			"BMC_12V_CTRL",
+			"PS_RUN_IO0_PG",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	rtc@6f {
+		compatible = "nuvoton,nct3018y";
+		reg = <0x6f>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+	// SCM TEMP SENSOR BOARD
+	temperature-sensor@4b {
+		compatible = "national,lm75b";
+		reg = <0x4b>;
+	};
+
+	// SCM CPLD IOEXP
+	io_expander4: gpio@4f {
+		compatible = "nxp,pca9555";
+		reg = <0x4f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"stby_power_en_cpld",
+			"stby_power_gd_cpld",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	// SCM FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// BSM FRU EEPROM
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC0 TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC0 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	multi-master;
+
+	// HPM 1 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+	// CBC 2 FRU
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
+	// CBC 3 FRU
+	eeprom@55 {
+		compatible = "atmel,24c02";
+		reg = <0x55>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+	multi-master;
+
+	// HPM FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// CBC 0 FRU
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
+
+	// CBC 1 FRU
+	eeprom@55 {
+		compatible = "atmel,24c02";
+		reg = <0x55>;
+	};
+
+	// HMC FRU EEPROM
+	eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	// PDB CPLD IOEXP 0x10
+	io_expander9: gpio@10 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x10>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"wSequence_Latch_State_N",
+			"wP12V_N1N2_RUNTIME_FLT_N",
+			"wP12V_FAN_RUNTIME_FLT_N",
+			"wP12V_AUX_RUNTIME_FLT_N",
+			"wHost_PERST_SEQPWR_FLT_N",
+			"wP12V_N1N2_SEQPWR_FLT_N",
+			"wP12V_FAN_SEQPWR_FLT_N",
+			"wP12V_AUX_SEQPWR_FLT_N",
+			"wP12V_RUNTIME_FLT_NIC1_N",
+			"wAUX_RUNTIME_FLT_NIC1_N",
+			"wP12V_SEQPWR_FLT_NIC1_N",
+			"wAUX_SEQPWR_FLT_NIC1_N",
+			"wP12V_RUNTIME_FLT_NIC0_N",
+			"wAUX_RUNTIME_FLT_NIC0_N",
+			"wP12V_SEQPWR_FLT_NIC0_N",
+			"wAUX_SEQPWR_FLT_NIC0_N";
+	};
+
+	// PDB CPLD IOEXP 0x11
+	io_expander10: gpio@11 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x11>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"FM_P12V_NIC1_FLTB_R_N",
+			"FM_P3V3_NIC1_FAULT_R_N",
+			"FM_P12V_NIC0_FLTB_R_N",
+			"FM_P3V3_NIC0_FAULT_R_N",
+			"P48V_HS2_FAULT_N_PLD",
+			"P48V_HS1_FAULT_N_PLD",
+			"P12V_AUX_FAN_OC_PLD_N",
+			"P12V_AUX_FAN_FAULT_PLD_N",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"FM_SYS_THROTTLE_N",
+			"OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N",
+			"OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N";
+	};
+
+	// PDB CPLD IOEXP 0x12
+	io_expander11: gpio@12 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"P12V_AUX_PSU_SMB_ALERT_R_L",
+			"P12V_SCM_SENSE_ALERT_R_N",
+			"P12V_AUX_NIC1_SENSE_ALERT_R_N",
+			"P12V_AUX_NIC0_SENSE_ALERT_R_N",
+			"NODEB_PSU_SMB_ALERT_R_L",
+			"NODEA_PSU_SMB_ALERT_R_L",
+			"P12V_AUX_FAN_ALERT_PLD_N",
+			"P52V_SENSE_ALERT_PLD_N",
+			"PRSNT_RJ45_FIO_N_R",
+			"FM_MAIN_PWREN_RMC_EN_ISO_R",
+			"CHASSIS3_LEAK_Q_N_PLD",
+			"CHASSIS2_LEAK_Q_N_PLD",
+			"CHASSIS1_LEAK_Q_N_PLD",
+			"CHASSIS0_LEAK_Q_N_PLD",
+			"",
+			"SMB_RJ45_FIO_TMP_ALERT";
+	};
+
+	// PDB CPLD IOEXP 0x13
+	io_expander12: gpio@13 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x13>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"FAN_7_PRESENT_N",
+			"FAN_6_PRESENT_N",
+			"FAN_5_PRESENT_N",
+			"FAN_4_PRESENT_N",
+			"FAN_3_PRESENT_N",
+			"FAN_2_PRESENT_N",
+			"FAN_1_PRESENT_N",
+			"FAN_0_PRESENT_N",
+			"HP_LVC3_OCP_V3_2_PRSNT2_PLD_N",
+			"HP_LVC3_OCP_V3_1_PRSNT2_PLD_N",
+			"PRSNT_HDDBD_POWER_CABLE_N",
+			"PRSNT_OSFP0_POWER_CABLE_N",
+			"PRSNT_CHASSIS3_LEAK_CABLE_R_N",
+			"PRSNT_CHASSIS2_LEAK_CABLE_R_N",
+			"PRSNT_CHASSIS1_LEAK_CABLE_R_N",
+			"PRSNT_CHASSIS0_LEAK_CABLE_R_N";
+	};
+
+	// PDB CPLD IOEXP 0x14
+	io_expander13: gpio@14 {
+		compatible = "nxp,pca9555";
+		reg = <0x14>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"rmc_en_dc_pwr_on",
+			"HDD_LED_N",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"leak_config_0",
+			"leak_config_1",
+			"leak_config_2",
+			"leak_config_3",
+			"mfg_led_test_mode_l",
+			"small_leak_err_inj",
+			"large_leak_err_inj",
+			"";
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC1 TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC1 FRU EEPROM
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi3_default>;
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi4_default>;
+	use-ncsi;
+};
+
+&udma {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cmm.dts
new file mode 100644
index 000000000000..24153868cc00
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cmm.dts
@@ -0,0 +1,1590 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Backpack CMM BMC";
+	compatible = "facebook,cmm-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * Override the default uart aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+
+		/*
+		 * PCA9548 (1-0077) provides 8 channels for connecting to
+		 * 4 Line Cards and 4 Fabric Cards.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (2-0071) provides 8 channels for connecting to
+		 * Power Distribution Board.
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (8-0077) provides 8 channels and the first 4
+		 * channels are connecting to 4 Fan Control Boards.
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		/*
+		 * 2 PCA9548 (18-0070 & 18-0073), 16 channels connecting
+		 * to Line Card #1.
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+
+		/*
+		 * 2 PCA9548 (19-0070 & 19-0073), 16 channels connecting
+		 * to Line Card #2.
+		 */
+		i2c56 = &imux56;
+		i2c57 = &imux57;
+		i2c58 = &imux58;
+		i2c59 = &imux59;
+		i2c60 = &imux60;
+		i2c61 = &imux61;
+		i2c62 = &imux62;
+		i2c63 = &imux63;
+		i2c64 = &imux64;
+		i2c65 = &imux65;
+		i2c66 = &imux66;
+		i2c67 = &imux67;
+		i2c68 = &imux68;
+		i2c69 = &imux69;
+		i2c70 = &imux70;
+		i2c71 = &imux71;
+
+		/*
+		 * 2 PCA9548 (20-0070 & 20-0073), 16 channels connecting
+		 * to Line Card #3.
+		 */
+		i2c72 = &imux72;
+		i2c73 = &imux73;
+		i2c74 = &imux74;
+		i2c75 = &imux75;
+		i2c76 = &imux76;
+		i2c77 = &imux77;
+		i2c78 = &imux78;
+		i2c79 = &imux79;
+		i2c80 = &imux80;
+		i2c81 = &imux81;
+		i2c82 = &imux82;
+		i2c83 = &imux83;
+		i2c84 = &imux84;
+		i2c85 = &imux85;
+		i2c86 = &imux86;
+		i2c87 = &imux87;
+
+		/*
+		 * 2 PCA9548 (21-0070 & 21-0073), 16 channels connecting
+		 * to Line Card #4.
+		 */
+		i2c88 = &imux88;
+		i2c89 = &imux89;
+		i2c90 = &imux90;
+		i2c91 = &imux91;
+		i2c92 = &imux92;
+		i2c93 = &imux93;
+		i2c94 = &imux94;
+		i2c95 = &imux95;
+		i2c96 = &imux96;
+		i2c97 = &imux97;
+		i2c98 = &imux98;
+		i2c99 = &imux99;
+		i2c100 = &imux100;
+		i2c101 = &imux101;
+		i2c102 = &imux102;
+		i2c103 = &imux103;
+
+		/*
+		 * 2 PCA9548 (16-0070 & 16-0073), 16 channels connecting
+		 * to Fabric Card #1.
+		 */
+		i2c104 = &imux104;
+		i2c105 = &imux105;
+		i2c106 = &imux106;
+		i2c107 = &imux107;
+		i2c108 = &imux108;
+		i2c109 = &imux109;
+		i2c110 = &imux110;
+		i2c111 = &imux111;
+		i2c112 = &imux112;
+		i2c113 = &imux113;
+		i2c114 = &imux114;
+		i2c115 = &imux115;
+		i2c116 = &imux116;
+		i2c117 = &imux117;
+		i2c118 = &imux118;
+		i2c119 = &imux119;
+
+		/*
+		 * 2 PCA9548 (17-0070 & 17-0073), 16 channels connecting
+		 * to Fabric Card #2.
+		 */
+		i2c120 = &imux120;
+		i2c121 = &imux121;
+		i2c122 = &imux122;
+		i2c123 = &imux123;
+		i2c124 = &imux124;
+		i2c125 = &imux125;
+		i2c126 = &imux126;
+		i2c127 = &imux127;
+		i2c128 = &imux128;
+		i2c129 = &imux129;
+		i2c130 = &imux130;
+		i2c131 = &imux131;
+		i2c132 = &imux132;
+		i2c133 = &imux133;
+		i2c134 = &imux134;
+		i2c135 = &imux135;
+
+		/*
+		 * 2 PCA9548 (22-0070 & 22-0073), 16 channels connecting
+		 * to Fabric Card #3.
+		 */
+		i2c136 = &imux136;
+		i2c137 = &imux137;
+		i2c138 = &imux138;
+		i2c139 = &imux139;
+		i2c140 = &imux140;
+		i2c141 = &imux141;
+		i2c142 = &imux142;
+		i2c143 = &imux143;
+		i2c144 = &imux144;
+		i2c145 = &imux145;
+		i2c146 = &imux146;
+		i2c147 = &imux147;
+		i2c148 = &imux148;
+		i2c149 = &imux149;
+		i2c150 = &imux150;
+		i2c151 = &imux151;
+
+		/*
+		 * 2 PCA9548 (23-0070 & 23-0073), 16 channels connecting
+		 * to Fabric Card #4.
+		 */
+		i2c152 = &imux152;
+		i2c153 = &imux153;
+		i2c154 = &imux154;
+		i2c155 = &imux155;
+		i2c156 = &imux156;
+		i2c157 = &imux157;
+		i2c158 = &imux158;
+		i2c159 = &imux159;
+		i2c160 = &imux160;
+		i2c161 = &imux161;
+		i2c162 = &imux162;
+		i2c163 = &imux163;
+		i2c164 = &imux164;
+		i2c165 = &imux165;
+		i2c166 = &imux166;
+		i2c167 = &imux167;
+
+		/*
+		 * PCA9548 (32-0070), 8 channels connecting to Fan Control
+		 # Board #1.
+		 */
+		i2c168 = &imux168;
+		i2c169 = &imux169;
+		i2c170 = &imux170;
+		i2c171 = &imux171;
+		i2c172 = &imux172;
+		i2c173 = &imux173;
+		i2c174 = &imux174;
+		i2c175 = &imux175;
+
+		/*
+		 * PCA9548 (33-0070), 8 channels connecting to Fan Control
+		 # Board #2.
+		 */
+		i2c176 = &imux176;
+		i2c177 = &imux177;
+		i2c178 = &imux178;
+		i2c179 = &imux179;
+		i2c180 = &imux180;
+		i2c181 = &imux181;
+		i2c182 = &imux182;
+		i2c183 = &imux183;
+
+		/*
+		 * PCA9548 (34-0070), 8 channels connecting to Fan Control
+		 # Board #3.
+		 */
+		i2c184 = &imux184;
+		i2c185 = &imux185;
+		i2c186 = &imux186;
+		i2c187 = &imux187;
+		i2c188 = &imux188;
+		i2c189 = &imux189;
+		i2c190 = &imux190;
+		i2c191 = &imux191;
+
+		/*
+		 * PCA9548 (35-0070), 8 channels connecting to Fan Control
+		 # Board #4.
+		 */
+		i2c192 = &imux192;
+		i2c193 = &imux193;
+		i2c194 = &imux194;
+		i2c195 = &imux195;
+		i2c196 = &imux196;
+		i2c197 = &imux197;
+		i2c198 = &imux198;
+		i2c199 = &imux199;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+		bootargs = "console=ttyS1,9600n8 root=/dev/ram rw earlycon";
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			      <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default
+		     &pinctrl_ncts1_default
+		     &pinctrl_ndcd1_default
+		     &pinctrl_ndsr1_default
+		     &pinctrl_ndtr1_default
+		     &pinctrl_nrts1_default>;
+};
+
+&uart3 {
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default
+		     &pinctrl_ncts3_default
+		     &pinctrl_ndcd3_default
+		     &pinctrl_nri3_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+/*
+ * I2C bus reserved for communication with COM-E.
+ */
+&i2c0 {
+	status = "okay";
+};
+
+/*
+ * I2C bus to Line Cards and Fabric Cards.
+ */
+&i2c1 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		/* To Fabric Card #1 */
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux104: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux105: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux106: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux107: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux108: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux109: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux110: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux111: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux112: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux113: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux114: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux115: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux116: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux117: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux118: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux119: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fabric Card #2 */
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux120: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux121: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux122: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux123: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux124: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux125: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux126: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux127: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux128: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux129: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux130: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux131: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux132: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux133: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux134: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux135: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Line Card #1 */
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux40: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux41: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux42: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux43: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux44: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux45: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux46: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux47: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux48: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux49: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux50: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux51: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux52: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux53: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux54: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux55: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Line Card #2 */
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux56: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux57: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux58: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux59: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux60: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux61: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux62: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux63: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux64: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux65: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux66: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux67: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux68: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux69: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux70: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux71: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To LC3 SCM */
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux72: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux73: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux74: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux75: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux76: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux77: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux78: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux79: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux80: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux81: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux82: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux83: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux84: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux85: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux86: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux87: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Line Card #4 */
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux88: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux89: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux90: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux91: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux92: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux93: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux94: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux95: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux96: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux97: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux98: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux99: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux100: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux101: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux102: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux103: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fabric Card #3 */
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux136: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux137: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux138: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux139: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux140: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux141: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux142: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux143: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux144: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux145: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux146: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux147: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux148: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux149: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux150: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux151: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fabric Card #4 */
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux152: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux153: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux154: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux155: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux156: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux157: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux158: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux159: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux160: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux161: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux162: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux163: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux164: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux165: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux166: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux167: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+	};
+};
+
+/*
+ * I2C bus to Power Distribution Board.
+ */
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+/*
+ * I2c bus connected with temperature sensors on CMM.
+ */
+&i2c3 {
+	status = "okay";
+};
+
+/*
+ * I2C bus reserved for communication with COM-E.
+ */
+&i2c4 {
+	status = "okay";
+};
+
+/*
+ * I2c bus connected with ADM1278.
+ */
+&i2c5 {
+	status = "okay";
+};
+
+/*
+ * I2c bus connected with I/O Expander.
+ */
+&i2c6 {
+	status = "okay";
+};
+
+/*
+ * I2c bus connected with I/O Expander and EPROMs.
+ */
+&i2c7 {
+	status = "okay";
+};
+
+/*
+ * I2C bus to Fan Control Boards.
+ */
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		/* To Fan Control Board #1 */
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux168: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux169: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux170: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux171: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux172: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux173: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux174: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux175: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fan Control Board #2 */
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux176: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux177: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux178: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux179: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux180: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux181: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux182: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux183: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fan Control Board #3 */
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux184: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux185: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux186: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux187: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux188: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux189: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux190: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux191: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fan Control Board #4 */
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux192: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux193: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux194: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux195: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux196: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux197: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux198: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux199: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+/*
+ * I2C bus to CMM CPLD.
+ */
+&i2c13 {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&vhub {
+	status = "disabled";
+};
+
+&sdhci0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd1_default>;
+};
+
+&sdhci1 {
+	status = "disabled";
+};
+
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout.dtsi"
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x2000000>;
+			label = "flash1";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts
new file mode 100644
index 000000000000..58c107a1b6cf
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+
+/dts-v1/;
+
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Darwin BMC";
+	compatible = "facebook,darwin-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			      <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c0 {
+	eeprom@50 {
+		compatible = "atmel,24c512";
+		reg = <0x50>;
+	};
+};
+
+&adc0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		     &pinctrl_adc2_default &pinctrl_adc3_default
+		     &pinctrl_adc4_default &pinctrl_adc5_default
+		     &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		     &pinctrl_adc10_default &pinctrl_adc11_default
+		     &pinctrl_adc12_default &pinctrl_adc13_default
+		     &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
new file mode 100644
index 000000000000..ff1009ea1c49
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Elbert BMC";
+	compatible = "facebook,elbert-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+
+		/*
+		 * 8 child channels of PCA9548 2-0075.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * 8 child channels of PCA9548 5-0075.
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&i2c2 {
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c5 {
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+/*
+ * BMC's "mac3" controller is connected to BCM53134P's IMP_RGMII port
+ * directly (fixed link, no PHY in between).
+ * Note: BMC's "mdio0" controller is connected to BCM53134P's MDIO
+ * interface, and the MDIO channel will be enabled in dts later, when
+ * BCM53134 is added to "bcm53xx" DSA driver.
+ */
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts
new file mode 100644
index 000000000000..48ca25f57ef6
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts
@@ -0,0 +1,1270 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Fuji BMC (64MB Datastore)";
+	compatible = "facebook,fuji-data64-bmc", "aspeed,ast2600";
+
+	aliases {
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (11-0077) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		/*
+		 * PCA9548 (24-0071) provides 8 channels connecting to
+		 * PDB-Left.
+		 */
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+
+		/*
+		 * PCA9548 (25-0072) provides 8 channels connecting to
+		 * PDB-Right.
+		 */
+		i2c56 = &imux56;
+		i2c57 = &imux57;
+		i2c58 = &imux58;
+		i2c59 = &imux59;
+		i2c60 = &imux60;
+		i2c61 = &imux61;
+		i2c62 = &imux62;
+		i2c63 = &imux63;
+
+		/*
+		 * PCA9548 (26-0076) provides 8 channels connecting to
+		 * FCM1.
+		 */
+		i2c64 = &imux64;
+		i2c65 = &imux65;
+		i2c66 = &imux66;
+		i2c67 = &imux67;
+		i2c68 = &imux68;
+		i2c69 = &imux69;
+		i2c70 = &imux70;
+		i2c71 = &imux71;
+
+		/*
+		 * PCA9548 (27-0076) provides 8 channels connecting to
+		 * FCM2.
+		 */
+		i2c72 = &imux72;
+		i2c73 = &imux73;
+		i2c74 = &imux74;
+		i2c75 = &imux75;
+		i2c76 = &imux76;
+		i2c77 = &imux77;
+		i2c78 = &imux78;
+		i2c79 = &imux79;
+
+		/*
+		 * PCA9548 (40-0076) provides 8 channels connecting to
+		 * PIM1.
+		 */
+		i2c80 = &imux80;
+		i2c81 = &imux81;
+		i2c82 = &imux82;
+		i2c83 = &imux83;
+		i2c84 = &imux84;
+		i2c85 = &imux85;
+		i2c86 = &imux86;
+		i2c87 = &imux87;
+
+		/*
+		 * PCA9548 (41-0076) provides 8 channels connecting to
+		 * PIM2.
+		 */
+		i2c88 = &imux88;
+		i2c89 = &imux89;
+		i2c90 = &imux90;
+		i2c91 = &imux91;
+		i2c92 = &imux92;
+		i2c93 = &imux93;
+		i2c94 = &imux94;
+		i2c95 = &imux95;
+
+		/*
+		 * PCA9548 (42-0076) provides 8 channels connecting to
+		 * PIM3.
+		 */
+		i2c96 = &imux96;
+		i2c97 = &imux97;
+		i2c98 = &imux98;
+		i2c99 = &imux99;
+		i2c100 = &imux100;
+		i2c101 = &imux101;
+		i2c102 = &imux102;
+		i2c103 = &imux103;
+
+		/*
+		 * PCA9548 (43-0076) provides 8 channels connecting to
+		 * PIM4.
+		 */
+		i2c104 = &imux104;
+		i2c105 = &imux105;
+		i2c106 = &imux106;
+		i2c107 = &imux107;
+		i2c108 = &imux108;
+		i2c109 = &imux109;
+		i2c110 = &imux110;
+		i2c111 = &imux111;
+
+		/*
+		 * PCA9548 (44-0076) provides 8 channels connecting to
+		 * PIM5.
+		 */
+		i2c112 = &imux112;
+		i2c113 = &imux113;
+		i2c114 = &imux114;
+		i2c115 = &imux115;
+		i2c116 = &imux116;
+		i2c117 = &imux117;
+		i2c118 = &imux118;
+		i2c119 = &imux119;
+
+		/*
+		 * PCA9548 (45-0076) provides 8 channels connecting to
+		 * PIM6.
+		 */
+		i2c120 = &imux120;
+		i2c121 = &imux121;
+		i2c122 = &imux122;
+		i2c123 = &imux123;
+		i2c124 = &imux124;
+		i2c125 = &imux125;
+		i2c126 = &imux126;
+		i2c127 = &imux127;
+
+		/*
+		 * PCA9548 (46-0076) provides 8 channels connecting to
+		 * PIM7.
+		 */
+		i2c128 = &imux128;
+		i2c129 = &imux129;
+		i2c130 = &imux130;
+		i2c131 = &imux131;
+		i2c132 = &imux132;
+		i2c133 = &imux133;
+		i2c134 = &imux134;
+		i2c135 = &imux135;
+
+		/*
+		 * PCA9548 (47-0076) provides 8 channels connecting to
+		 * PIM8.
+		 */
+		i2c136 = &imux136;
+		i2c137 = &imux137;
+		i2c138 = &imux138;
+		i2c139 = &imux139;
+		i2c140 = &imux140;
+		i2c141 = &imux141;
+		i2c142 = &imux142;
+		i2c143 = &imux143;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <3>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
+			   <0>,	/* device reg=<1> does not exist */
+			   <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
+
+		eeprom@2 {
+			compatible = "atmel,at93c46d";
+			spi-max-frequency = <250000>;
+			data-size = <16>;
+			spi-cs-high;
+			reg = <2>;
+		};
+	};
+};
+
+&fmc {
+	flash@0 {
+		/delete-node/partitions;
+#include "facebook-bmc-flash-layout-128-data64.dtsi"
+	};
+};
+
+&i2c0 {
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c2 {
+	/*
+	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
+	 * Controller Module).
+	 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adm1278@10 {
+				compatible = "adi,adm1278";
+				reg = <0x10>;
+				shunt-resistor-micro-ohms = <1500>;
+			};
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c8 {
+	/*
+	 * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				imux48: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux49: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux50: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+
+					lp5012@14 {
+						compatible = "ti,lp5012";
+						reg = <0x14>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						multi-led@0 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <0>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "sys";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@1 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <1>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "fan";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@2 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <2>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "psu";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@3 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <3>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "smb";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+					};
+				};
+
+				imux51: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux52: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux53: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux54: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux55: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				imux56: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux57: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux58: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux59: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux60: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux61: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux62: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux63: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux64: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux65: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux66: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux67: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					adm1278@10 {
+						compatible = "adi,adm1278";
+						reg = <0x10>;
+						shunt-resistor-micro-ohms = <250>;
+					};
+				};
+
+				imux68: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux69: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux70: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux71: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux72: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux73: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux74: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux75: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					adm1278@10 {
+						compatible = "adi,adm1278";
+						reg = <0x10>;
+						shunt-resistor-micro-ohms = <250>;
+					};
+				};
+
+				imux76: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux77: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux78: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux79: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	/*
+	 * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux80: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux81: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux82: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux83: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux84: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux85: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux86: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux87: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux88: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux89: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux90: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux91: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux92: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux93: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux94: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux95: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux96: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux97: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux98: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux99: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux100: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux101: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux102: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux103: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux104: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux105: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux106: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux107: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux108: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux109: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux110: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux111: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux44: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux112: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux113: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux114: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux115: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux116: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux117: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux118: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux119: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux45: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux120: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux121: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux122: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux123: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux124: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux125: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux126: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux127: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux46: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux128: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux129: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux130: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux131: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux132: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux133: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux134: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux135: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux47: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux136: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux137: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux138: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux139: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux140: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux141: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux142: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux143: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mdio1 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@13 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0d>;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
+
+/*
+ * FIXME: rgmii delay is introduced by MAC (configured in u-boot now)
+ * instead of PCB on fuji board, so the "phy-mode" should be updated to
+ * "rgmii-[tx|rx]id" when the aspeed-mac driver can handle the delay
+ * properly.
+ */
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
new file mode 100644
index 000000000000..5dc2a165e441
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+#include "aspeed-bmc-facebook-fuji-data64.dts"
+
+/ {
+	model = "Facebook Fuji BMC";
+	compatible = "facebook,fuji-bmc", "aspeed,ast2600";
+};
+
+&fmc {
+	flash@0 {
+		/delete-node/partitions;
+#include "facebook-bmc-flash-layout-128.dtsi"
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dts
new file mode 100644
index 000000000000..60e875ac2461
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+/dts-v1/;
+
+#include "ast2400-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Galaxy 100 BMC";
+	compatible = "facebook,galaxy100-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 3>, <&adc 4>, <&adc 8>, <&adc 9>;
+	};
+};
+
+&wdt2 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+&fmc {
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.1";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1@0 {
+				reg = <0x0 0x2000000>;
+				label = "flash1";
+			};
+		};
+	};
+};
+
+
+&i2c9 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts
new file mode 100644
index 000000000000..49914a4a179f
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Greatlakes BMC";
+	compatible = "facebook,greatlakes-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+				<&adc1 0>, <&adc1 2>, <&adc1 3>, <&adc1 4>,
+				<&adc1 5>, <&adc1 6>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	no-hw-checksum;
+	use-ncsi;
+	mellanox,multi-host;
+	ncsi-ctrl,start-redo-probe;
+	ncsi-ctrl,no-channel-monitor;
+	ncsi-package = <1>;
+	ncsi-channel = <1>;
+	ncsi-rexmit = <1>;
+	ncsi-timeout = <2>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc2";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+	mctp-controller;
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+	// NIC EEPROM
+	eeprom@50 {
+		compatible = "st,24c32";
+		reg = <0x50>;
+	};
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	temperature-sensor@4f {
+		compatible = "national,lm75";
+		reg = <0x4f>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&adc0 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+			&pinctrl_adc2_default &pinctrl_adc3_default
+			&pinctrl_adc4_default &pinctrl_adc5_default
+			&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc10_default
+			&pinctrl_adc11_default &pinctrl_adc12_default
+			&pinctrl_adc13_default &pinctrl_adc14_default>;
+};
+
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>;
+
+	gpio-line-names =
+	/*A0-A7*/ "","","","","","","","",
+	/*B0-B7*/ "power-bmc-nic","presence-ocp-debug",
+		  "power-bmc-slot1","power-bmc-slot2",
+		  "power-bmc-slot3","power-bmc-slot4","","",
+	/*C0-C7*/ "presence-ocp-nic","","","reset-cause-nic-primary",
+		  "reset-cause-nic-secondary","","","",
+	/*D0-D7*/ "","","","","","","","",
+	/*E0-E7*/ "","","","","","","","",
+	/*F0-F7*/ "slot1-bmc-reset-button","slot2-bmc-reset-button",
+		  "slot3-bmc-reset-button","slot4-bmc-reset-button",
+		  "","","","presence-emmc",
+	/*G0-G7*/ "","","","","","","","",
+	/*H0-H7*/ "","","","",
+		  "presence-mb-slot1","presence-mb-slot2",
+		  "presence-mb-slot3","presence-mb-slot4",
+	/*I0-I7*/ "","","","","","","bb-bmc-button","",
+	/*J0-J7*/ "","","","","","","","",
+	/*K0-K7*/ "","","","","","","","",
+	/*L0-L7*/ "","","","","","","","",
+	/*M0-M7*/ "","power-nic-bmc-enable","","usb-bmc-enable","","reset-cause-usb-hub","","",
+	/*N0-N7*/ "","","","","bmc-ready","","","",
+	/*O0-O7*/ "","","","","","","fan0-bmc-cpld-enable","fan1-bmc-cpld-enable",
+	/*P0-P7*/ "fan2-bmc-cpld-enable","fan3-bmc-cpld-enable",
+		  "reset-cause-pcie-slot1","reset-cause-pcie-slot2",
+		  "reset-cause-pcie-slot3","reset-cause-pcie-slot4","","",
+	/*Q0-Q7*/ "","","","","","","","",
+	/*R0-R7*/ "","","","","","","","",
+	/*S0-S7*/ "","","power-p5v-usb","presence-bmc-tpm","","","","",
+	/*T0-T7*/ "","","","","","","","",
+	/*U0-U7*/ "","","","","","","","GND",
+	/*V0-V7*/ "bmc-slot1-ac-button","bmc-slot2-ac-button",
+		  "bmc-slot3-ac-button","bmc-slot4-ac-button",
+		  "","","","",
+	/*W0-W7*/ "","","","","","","","",
+	/*X0-X7*/ "","","","","","","","",
+	/*Y0-Y7*/ "","","","reset-cause-emmc","","","","",
+	/*Z0-Z7*/ "","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/ "","","","","","","","",
+	/*18B0-18B7*/ "","","","","","","","",
+	/*18C0-18C7*/ "","","","","","","","",
+	/*18D0-18D7*/ "","","","","","","","",
+	/*18E0-18E3*/ "","","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
new file mode 100644
index 000000000000..1c50e4a367b2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -0,0 +1,830 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Harma";
+	compatible = "facebook,harma-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart4;
+		serial4 = &uart5;
+
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		spi1 = &spi_gpio;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "power_blue";
+			default-state = "off";
+			gpios = <&gpio0 124 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	spi_gpio: spi {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+// HOST BIOS Debug
+&uart1 {
+	status = "okay";
+};
+
+// SOL Host Console
+&uart2 {
+	status = "okay";
+	pinctrl-0 = <>;
+};
+
+// SOL BMC Console
+&uart4 {
+	status = "okay";
+	pinctrl-0 = <>;
+};
+
+// BMC Debug Console
+&uart5 {
+	status = "okay";
+};
+
+// MTIA
+&uart6 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+// BIOS Flash
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <12000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	pwm@5e {
+		compatible = "maxim,max31790";
+		reg = <0x5e>;
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina238";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina238";
+		reg = <0x41>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina238";
+		reg = <0x44>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina238";
+		reg = <0x45>;
+		shunt-resistor = <1000>;
+	};
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	gpio@12 {
+		compatible = "nxp,pca9555";
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <116 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","fcb2-activate",
+		"","";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	mctp-controller;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	// MB NIC FRU
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	pwm@5e {
+		compatible = "maxim,max31790";
+		reg = <0x5e>;
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina238";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina238";
+		reg = <0x41>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina238";
+		reg = <0x44>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina238";
+		reg = <0x45>;
+		shunt-resistor = <1000>;
+	};
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	gpio@12 {
+		compatible = "nxp,pca9555";
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <114 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","fcb1-activate",
+		"","";
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux20: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			//Retimer Flash
+			eeprom@50 {
+				compatible = "atmel,24c2048";
+				reg = <0x50>;
+				pagesize = <128>;
+			};
+		};
+		imux21: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			retimer@24 {
+				compatible = "asteralabs,pt5161l";
+				reg = <0x24>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	// PDB FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+
+	power-monitor@69 {
+		compatible = "pmbus";
+		reg = <0x69>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	power-monitor@44 {
+		compatible = "lltc,ltc4287";
+		reg = <0x44>;
+		shunt-resistor-micro-ohms = <250>;
+	};
+
+	power-monitor@40 {
+		compatible = "infineon,xdp710";
+		reg = <0x40>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina238";
+		reg = <0x45>;
+		shunt-resistor = <500>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux22: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			power-monitor@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+		};
+		imux23: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			power-monitor@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	mctp-controller;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@30 {
+		compatible = "nxp,pca9555";
+		reg = <0x30>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+	gpio@31 {
+		compatible = "nxp,pca9555";
+		reg = <0x31>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PTTV FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	gpio@13 {
+		compatible = "nxp,pca9555";
+		reg = <0x13>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <222 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","health-mmc",
+		"","",
+		"","",
+		"","",
+		"","";
+	};
+
+	gpio@30 {
+		compatible = "nxp,pca9555";
+		reg = <0x30>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+	gpio@31 {
+		compatible = "nxp,pca9555";
+		reg = <0x31>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// Aegis FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	retimer@24 {
+		compatible = "asteralabs,pt5161l";
+		reg = <0x24>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux28: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			power-sensor@20 {
+				compatible = "mps,mp5990";
+				reg = <0x20>;
+			};
+			power-monitor@61 {
+				compatible = "isil,isl69260";
+				reg = <0x61>;
+			};
+			power-monitor@62 {
+				compatible = "isil,isl69260";
+				reg = <0x62>;
+			};
+			power-monitor@63 {
+				compatible = "isil,isl69260";
+				reg = <0x63>;
+			};
+			power-monitor@64 {
+				compatible = "infineon,xdpe152c4";
+				reg = <0x64>;
+			};
+			power-monitor@66 {
+				compatible = "infineon,xdpe152c4";
+				reg = <0x66>;
+			};
+			power-monitor@68 {
+				compatible = "infineon,xdpe152c4";
+				reg = <0x68>;
+			};
+		};
+		imux29: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			//MB FRU
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+
+			adc@1d {
+				compatible = "ti,adc128d818";
+				reg = <0x1d>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+		};
+		imux30: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		imux31: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+// To Debug card
+&i2c14 {
+	status = "okay";
+	multi-master;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	// SCM FRU
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// BSM FRU
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&adc0 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","",
+			"bmc-spi-mux-select-0","led-identify","","",
+	/*C0-C7*/	"reset-cause-platrst","","","","",
+			"power-hsc-good","power-chassis-good","",
+	/*D0-D7*/	"","","sol-uart-select","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","",
+			"leakage-detect-alert","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"led-postcode-0","led-postcode-1",
+			"led-postcode-2","led-postcode-3",
+			"led-postcode-4","led-postcode-5",
+			"led-postcode-6","led-postcode-7",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"power-button","power-host-control",
+			"reset-button","","led-power","","","",
+	/*Q0-Q7*/
+			"","","","",
+			"","power-chassis-control","","uart-switch-button",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","led-identify-gate","",
+	/*V0-V7*/	"","","","",
+			"","",
+			"","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","presence-post-card","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/ "ac-power-button","","","","","","","",
+	/*18B0-18B7*/ "","","","","","","","",
+	/*18C0-18C7*/ "","","","","","","","",
+	/*18D0-18D7*/ "","","","","","","","",
+	/*18E0-18E3*/ "","","","","","","","";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <2000000>;
+	gpio-line-names =
+	/*in - out - in - out */
+	/*A0-A3 line 0-7*/
+	"presence-scm-cable","power-config-disable-e1s-0",
+	"","",
+	"","power-config-disable-e1s-1",
+	"","",
+	/*A4-A7 line 8-15*/
+	"","power-config-asic-module-enable",
+	"power-p3v3-standby","power-config-asic-power-good",
+	"power-p1v8-good","power-config-pdb-power-good",
+	"presence-cpu","smi-control-n",
+	/*B0-B3 line 16-23*/
+	"","nmi-control-n",
+	"power-pvdd33-s5","nmi-control-sync-flood-n",
+	"","",
+	"power-pvdd18-s5","",
+	/*B4-B7 line 24-31*/
+	"","FM_CPU_SP5R1",
+	"reset-cause-rsmrst","FM_CPU_SP5R2",
+	"","FM_CPU_SP5R3",
+	"","FM_CPU_SP5R4",
+	/*C0-C3 line 32-39*/
+	"","FM_CPU0_SA0",
+	"","FM_CPU0_SA1",
+	"","rt-cpu0-p0-enable",
+	"","rt-cpu0-p1-enable",
+	/*C4-C7 line 40-47*/
+	"","smb-rt-rom-p0-select",
+	"","smb-rt-rom-p1-select",
+	"","i3c-cpu-mux0-oe-n",
+	"","i3c-cpu-mux0-select",
+	/*D0-D3 line 48-55*/
+	"","i3c-cpu-mux1-oe-n",
+	"","i3c-cpu-mux1-select",
+	"","reset-control-bmc",
+	"","reset-control-cpu0-p0-mux",
+	/*D4-D7 line 56-63*/
+	"","reset-control-cpu0-p1-mux",
+	"","reset-control-e1s-mux",
+	"power-host-good","reset-control-mb-mux",
+	"host0-ready","reset-control-smb-e1s-0",
+	/*E0-E3 line 64-71*/
+	"","reset-control-smb-e1s-1",
+	"post-end-n","reset-control-srst",
+	"presence-e1s-0","reset-control-usb-hub",
+	"","reset-control",
+	/*E4-E7 line 72-79*/
+	"presence-e1s-1","reset-control-cpu-kbrst",
+	"","reset-control-platrst",
+	"","bmc-jtag-mux-select-0",
+	"","bmc-jtag-mux-select-1",
+	/*F0-F3 line 80-87*/
+	"","bmc-jtag-select",
+	"","bmc-ready-n",
+	"","bmc-ready-sgpio",
+	"","rt-cpu0-p0-force-enable",
+	/*F4-F7 line 88-95*/
+	"presence-asic-modules-0","rt-cpu0-p1-force-enable",
+	"presence-asic-modules-1","bios-debug-msg-disable",
+	"power-asic-good","uart-control-buffer-select",
+	"presence-cmm","ac-control-n",
+	/*G0-G3 line 96-103*/
+	"FM_CPU_CORETYPE2","",
+	"FM_CPU_CORETYPE1","rtc-battery-voltage-read-enable",
+	"FM_CPU_CORETYPE0","",
+	"FM_BOARD_REV_ID5","",
+	/*G4-G7 line 104-111*/
+	"FM_BOARD_REV_ID4","",
+	"FM_BOARD_REV_ID3","",
+	"FM_BOARD_REV_ID2","",
+	"FM_BOARD_REV_ID1","",
+	/*H0-H3 line 112-119*/
+	"FM_BOARD_REV_ID0","reset-control-cmos-clear",
+	"","","","","","",
+	/*H4-H7 line 120-127*/
+	"","",
+	"reset-control-pcie-expansion-3","",
+	"reset-control-pcie-expansion-2","",
+	"reset-control-pcie-expansion-1","",
+	/*I0-I3 line 128-135*/
+	"reset-control-pcie-expansion-0","",
+	"FM_EXP_SLOT_ID1","",
+	"FM_EXP_SLOT_ID0","",
+	"","",
+	/*I4-I7 line 136-143*/
+	"","","","","","","","",
+	/*J0-J3 line 144-151*/
+	"","","power-card-enable","","","","","",
+	/*J4-J7 line 152-159*/
+	"SLOT_ID_BCB_0","",
+	"SLOT_ID_BCB_1","",
+	"SLOT_ID_BCB_2","",
+	"SLOT_ID_BCB_3","",
+	/*K0-K3 line 160-167*/
+	"","","","","","","P0_I3C_APML_ALERT_L","",
+	/*K4-K7 line 168-175*/
+	"","","","","","","irq-uv-detect-alert","",
+	/*L0-L3 line 176-183*/
+	"irq-hsc-alert","",
+	"cpu0-prochot-alert","",
+	"cpu0-thermtrip-alert","",
+	"reset-cause-pcie","",
+	/*L4-L7 line 184-191*/
+	"pvdd11-ocp-alert","",
+	"power-fault-n","",
+	"asic0-card-type-detection0-n","",
+	"asic0-card-type-detection1-n","",
+	/*M0-M3 line 192-199*/
+	"asic0-card-type-detection2-n","",
+	"uart-switch-lsb","",
+	"uart-switch-msb","",
+	"power-12v-memory-good","",
+	/*M4-M7 line 200-207*/
+	"","","","","","","","",
+	/*N0-N3 line 208-215*/
+	"","","","","","","","",
+	/*N4-N7 line 216-223*/
+	"","","","","","","","",
+	/*O0-O3 line 224-231*/
+	"","",
+	"irq-pvddcore0-ocp-alert","",
+	"irq-pvddcore1-ocp-alert","",
+	"","",
+	/*O4-O7 line 232-239*/
+	"","","","","","","","",
+	/*P0-P3 line 240-247*/
+	"","","","","","","","",
+	/*P4-P7 line 248-255*/
+	"","","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
new file mode 100644
index 000000000000..eb8d4b95596c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
@@ -0,0 +1,1619 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2023 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Minerva CMM";
+	compatible = "facebook,minerva-cmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		serial5 = &uart6;
+		/*
+		 * PCA9548 (2-0077) provides 8 channels connecting to
+		 * 6 pcs of FCB (Fan Controller Board).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		spi1 = &spi_gpio;
+	};
+
+	chosen {
+		stdout-path = "serial5:57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			<&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "power_blue";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			label = "fan_status_led";
+			gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-4 {
+			label = "fan_fault_led_n";
+			gpios = <&leds_gpio 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-5 {
+			label = "bmc_ready_noled";
+			gpios = <&sgpiom0 141 (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+	};
+
+	spi_gpio: spi {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&uart6 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <2000000>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	power-monitor@40 {
+		compatible = "ti,ina230";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	power-monitor@41 {
+		compatible = "ti,ina230";
+		reg = <0x41>;
+		shunt-resistor = <1000>;
+	};
+
+	power-monitor@44 {
+		compatible = "lltc,ltc4287";
+		reg = <0x44>;
+		shunt-resistor-micro-ohms = <2000>;
+	};
+
+	power-monitor@43 {
+		compatible = "infineon,xdp710";
+		reg = <0x43>;
+	};
+
+	leds_gpio: gpio@19 {
+		compatible = "nxp,pca9555";
+		reg = <0x19>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@11 {
+		compatible = "nxp,pca9555";
+		reg = <0x11>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <238 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"PWRGD_P24V_SMPWROK", "P1V5_PWROK",
+		"P3V3_PWROK", "P5V_PWROK",
+		"P12V_SCM_PWROK", "P12V_PWROK",
+		"P24V_PWROK", "P48V_HSC_PWROK",
+		"ERR_GPIO_IRQ", "TMP75_ALERT_N",
+		"BMC_PWROK", "P12V_INA230_ALERT_N",
+		"P24V_INA230_ALERT_N","",
+		"P48V_HSC_ALERT_N", "P1V05_PWROK";
+	};
+
+	gpio@12 {
+		compatible = "nxp,pca9555";
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <240 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"P1V05_PWR_FAIL", "P1V5_PWR_FAIL",
+		"P24V_PWR_FAIL", "P24V_SM_PWR_FAIL",
+		"IRQ_NW0/1/2_N", "IRQ_NW3/4/5_N",
+		"RTC_INT_N_R", "ERR_GPIO_IRQ",
+		"", "",
+		"", "",
+		"", "",
+		"", "";
+	};
+
+	gpio@13 {
+		compatible = "nxp,pca9555";
+		reg = <0x13>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <242 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"", "",
+		"", "",
+		"", "",
+		"", "",
+		"RACKMON_A_1", "RACKMON_A_2",
+		"RACKMON_B_1", "RACKMON_B_2",
+		"", "",
+		"", "";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		// FCB 1
+		imux16: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN1_PWRGD_R", "P48V_FAN2_PWRGD_R",
+				"P48V_FAN3_PWRGD_R", "P48V_FAN4_PWRGD_R",
+				"FCB_1_P48V_ZONE0_PWRGD_R", "FCB_1_P48V_ZONE1_PWRGD_R",
+				"FCB_1_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN1_ALERT_N", "INA238_FAN2_ALERT_N",
+				"INA238_FAN3_ALERT_N", "INA238_FAN4_ALERT_N",
+				"FCB_1_TMP75_ALERT_N", "",
+				"", "",
+				"FAN1_PRSNT", "FAN2_PRSNT",
+				"FAN3_PRSNT", "FAN4_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN1_IL_TACH_ALERT", "FAN1_OL_TACH_ALERT",
+				"FAN2_IL_TACH_ALERT", "FAN2_OL_TACH_ALERT",
+				"FAN3_IL_TACH_ALERT", "FAN3_OL_TACH_ALERT",
+				"FAN4_IL_TACH_ALERT", "FAN4_IL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_1_P1V0_POWER_FAIL", "FCB_1_P1V8_POWER_FAIL",
+				"FCB_1_P48V_ZONE0_POWER_FAIL", "FAN1_POWER_FAIL",
+				"FAN2_POWER_FAIL", "FAN3_POWER_FAIL",
+				"FAN4_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 2
+		imux17: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN5_PWRGD_R", "P48V_FAN6_PWRGD_R",
+				"P48V_FAN7_PWRGD_R", "P48V_FAN8_PWRGD_R",
+				"FCB_2_P48V_ZONE0_PWRGD_R", "FCB_2_P48V_ZONE1_PWRGD_R",
+				"FCB_2_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN5_ALERT_N", "INA238_FAN6_ALERT_N",
+				"INA238_FAN7_ALERT_N", "INA238_FAN8_ALERT_N",
+				"FCB_2_TMP75_ALERT_N", "",
+				"", "",
+				"FAN5_PRSNT", "FAN6_PRSNT",
+				"FAN7_PRSNT", "FAN8_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN5_IL_TACH_ALERT", "FAN5_OL_TACH_ALERT",
+				"FAN6_IL_TACH_ALERT", "FAN6_OL_TACH_ALERT",
+				"FAN7_IL_TACH_ALERT", "FAN7_OL_TACH_ALERT",
+				"FAN8_IL_TACH_ALERT", "FAN8_IL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_2_P1V0_POWER_FAIL", "FCB_2_P1V8_POWER_FAIL",
+				"FCB_2_P48V_ZONE0_POWER_FAIL", "FAN5_POWER_FAIL",
+				"FAN6_POWER_FAIL", "FAN7_POWER_FAIL",
+				"FAN8_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 3
+		imux18: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN9_PWRGD_R", "P48V_FAN10_PWRGD_R",
+				"P48V_FAN11_PWRGD_R", "P48V_FAN12_PWRGD_R",
+				"FCB_3_P48V_ZONE0_PWRGD_R", "FCB_3_P48V_ZONE1_PWRGD_R",
+				"FCB_3_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN9_ALERT_N", "INA238_FAN10_ALERT_N",
+				"INA238_FAN11_ALERT_N", "INA238_FAN12_ALERT_N",
+				"FCB_3_TMP75_ALERT_N", "",
+				"", "",
+				"FAN9_PRSNT", "FAN10_PRSNT",
+				"FAN11_PRSNT", "FAN12_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN9_IL_TACH_ALERT", "FAN9_OL_TACH_ALERT",
+				"FAN10_IL_TACH_ALERT", "FAN10_OL_TACH_ALERT",
+				"FAN11_IL_TACH_ALERT", "FAN11_OL_TACH_ALERT",
+				"FAN12_IL_TACH_ALERT", "FAN12_IL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_3_P1V0_POWER_FAIL", "FCB_3_P1V8_POWER_FAIL",
+				"FCB_3_P48V_ZONE0_POWER_FAIL", "FAN9_POWER_FAIL",
+				"FAN10_POWER_FAIL", "FAN11_POWER_FAIL",
+				"FAN12_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 4
+		imux19: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN13_PWRGD_R", "P48V_FAN14_PWRGD_R",
+				"P48V_FAN15_PWRGD_R", "P48V_FAN16_PWRGD_R",
+				"FCB_4_P48V_ZONE0_PWRGD_R", "FCB_4_P48V_ZONE1_PWRGD_R",
+				"FCB_4_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN13_ALERT_N", "INA238_FAN14_ALERT_N",
+				"INA238_FAN15_ALERT_N", "INA238_FAN16_ALERT_N",
+				"FCB_4_TMP75_ALERT_N", "",
+				"", "",
+				"FAN13_PRSNT", "FAN14_PRSNT",
+				"FAN15_PRSNT", "FAN16_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN13_IL_TACH_ALERT", "FAN13_OL_TACH_ALERT",
+				"FAN14_IL_TACH_ALERT", "FAN14_OL_TACH_ALERT",
+				"FAN15_IL_TACH_ALERT", "FAN15_OL_TACH_ALERT",
+				"FAN16_IL_TACH_ALERT", "FAN16_IL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_4_P1V0_POWER_FAIL", "FCB_4_P1V8_POWER_FAIL",
+				"FCB_4_P48V_ZONE0_POWER_FAIL", "FAN13_POWER_FAIL",
+				"FAN14_POWER_FAIL", "FAN15_POWER_FAIL",
+				"FAN16_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 5
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN20_PWRGD_R", "P48V_FAN19_PWRGD_R",
+				"P48V_FAN18_PWRGD_R", "P48V_FAN17_PWRGD_R",
+				"FCB_5_P48V_ZONE0_PWRGD_R", "FCB_5_P48V_ZONE1_PWRGD_R",
+				"FCB_5_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN20_ALERT_N", "INA238_FAN19_ALERT_N",
+				"INA238_FAN18_ALERT_N", "INA238_FAN17_ALERT_N",
+				"FCB_5_TMP75_ALERT_N", "",
+				"", "",
+				"FAN20_PRSNT", "FAN19_PRSNT",
+				"FAN18_PRSNT", "FAN17_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN20_IL_TACH_ALERT", "FAN20_OL_TACH_ALERT",
+				"FAN19_IL_TACH_ALERT", "FAN19_OL_TACH_ALERT",
+				"FAN18_IL_TACH_ALERT", "FAN18_OL_TACH_ALERT",
+				"FAN17_IL_TACH_ALERT", "FAN17_OL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_5_P1V0_POWER_FAIL", "FCB_5_P1V8_POWER_FAIL",
+				"FCB_5_P48V_ZONE0_POWER_FAIL", "FAN20_POWER_FAIL",
+				"FAN19_POWER_FAIL", "FAN18_POWER_FAIL",
+				"FAN17_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 6
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN24_PWRGD_R", "P48V_FAN23_PWRGD_R",
+				"P48V_FAN22_PWRGD_R", "P48V_FAN21_PWRGD_R",
+				"FCB_6_P48V_ZONE0_PWRGD_R", "FCB_6_P48V_ZONE1_PWRGD_R",
+				"FCB_6_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN24_ALERT_N", "INA238_FAN23_ALERT_N",
+				"INA238_FAN22_ALERT_N", "INA238_FAN21_ALERT_N",
+				"FCB_6_TMP75_ALERT_N", "",
+				"", "",
+				"FAN24_PRSNT", "FAN23_PRSNT",
+				"FAN22_PRSNT", "FAN21_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN24_IL_TACH_ALERT", "FAN24_OL_TACH_ALERT",
+				"FAN23_IL_TACH_ALERT", "FAN23_OL_TACH_ALERT",
+				"FAN22_IL_TACH_ALERT", "FAN22_OL_TACH_ALERT",
+				"FAN21_IL_TACH_ALERT", "FAN21_OL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_6_P1V0_POWER_FAIL", "FCB_6_P1V8_POWER_FAIL",
+				"FCB_6_P48V_ZONE0_POWER_FAIL", "FAN24_POWER_FAIL",
+				"FAN23_POWER_FAIL", "FAN22_POWER_FAIL",
+				"FAN21_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux28: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux29: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux30: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux31: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux36: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux37: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux38: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux39: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux44: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux45: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux46: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux47: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+	multi-master;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&adc0 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","BLADE_UART_SEL2","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","BLADE_UART_SEL0","","","",
+	/*M0-M7*/	"","","","","","BLADE_UART_SEL1","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","power-chassis-control","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","host0-ready",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","BAT_DETECT","","power-chassis-good","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","BLADE_UART_SEL3","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&sgpiom0 {
+	gpio-line-names =
+	/*"input pin","output pin"*/
+	/*A0 - A7*/
+	"PRSNT_MTIA_BLADE1_N","PWREN_MTIA_BLADE1_EN_N",
+	"PRSNT_MTIA_BLADE2_N","PWREN_MTIA_BLADE2_EN_N",
+	"PRSNT_MTIA_BLADE3_N","PWREN_MTIA_BLADE3_EN_N",
+	"PRSNT_MTIA_BLADE4_N","PWREN_MTIA_BLADE4_EN_N",
+	"PRSNT_MTIA_BLADE5_N","PWREN_MTIA_BLADE5_EN_N",
+	"PRSNT_MTIA_BLADE6_N","PWREN_MTIA_BLADE6_EN_N",
+	"PRSNT_MTIA_BLADE7_N","PWREN_MTIA_BLADE7_EN_N",
+	"PRSNT_MTIA_BLADE8_N","PWREN_MTIA_BLADE8_EN_N",
+	/*B0 - B7*/
+	"PRSNT_MTIA_BLADE9_N","PWREN_MTIA_BLADE9_EN_N",
+	"PRSNT_MTIA_BLADE10_N","PWREN_MTIA_BLADE10_EN_N",
+	"PRSNT_MTIA_BLADE11_N","PWREN_MTIA_BLADE11_EN_N",
+	"PRSNT_MTIA_BLADE12_N","PWREN_MTIA_BLADE12_EN_N",
+	"PRSNT_MTIA_BLADE13_N","PWREN_MTIA_BLADE13_EN_N",
+	"PRSNT_MTIA_BLADE14_N","PWREN_MTIA_BLADE14_EN_N",
+	"PRSNT_MTIA_BLADE15_N","PWREN_MTIA_BLADE15_EN_N",
+	"PRSNT_MTIA_BLADE16_N","PWREN_MTIA_BLADE16_EN_N",
+	/*C0 - C7*/
+	"PRSNT_NW_BLADE1_N","PWREN_NW_BLADE1_EN_N",
+	"PRSNT_NW_BLADE2_N","PWREN_NW_BLADE2_EN_N",
+	"PRSNT_NW_BLADE3_N","PWREN_NW_BLADE3_EN_N",
+	"PRSNT_NW_BLADE4_N","PWREN_NW_BLADE4_EN_N",
+	"PRSNT_NW_BLADE5_N","PWREN_NW_BLADE5_EN_N",
+	"PRSNT_NW_BLADE6_N","PWREN_NW_BLADE6_EN_N",
+	"PRSNT_FCB_1_N","PWREN_MTIA_BLADE1_HSC_EN_N",
+	"PRSNT_FCB_2_N","PWREN_MTIA_BLADE2_HSC_EN_N",
+	/*D0 - D7*/
+	"PRSNT_FCB_3_N","PWREN_MTIA_BLADE3_HSC_EN_N",
+	"PRSNT_FCB_4_N","PWREN_MTIA_BLADE4_HSC_EN_N",
+	"PRSNT_FCB_6_N","PWREN_MTIA_BLADE5_HSC_EN_N",
+	"PRSNT_FCB_5_N","PWREN_MTIA_BLADE6_HSC_EN_N",
+	"PWRGD_MTIA_BLADE1_PWROK_N","PWREN_MTIA_BLADE7_HSC_EN_N",
+	"PWRGD_MTIA_BLADE2_PWROK_N","PWREN_MTIA_BLADE8_HSC_EN_N",
+	"PWRGD_MTIA_BLADE3_PWROK_N","PWREN_MTIA_BLADE9_HSC_EN_N",
+	"PWRGD_MTIA_BLADE4_PWROK_N","PWREN_MTIA_BLADE10_HSC_EN_N",
+	/*E0 - E7*/
+	"PWRGD_MTIA_BLADE5_PWROK_N","PWREN_MTIA_BLADE11_HSC_EN_N",
+	"PWRGD_MTIA_BLADE6_PWROK_N","PWREN_MTIA_BLADE12_HSC_EN_N",
+	"PWRGD_MTIA_BLADE7_PWROK_N","PWREN_MTIA_BLADE13_HSC_EN_N",
+	"PWRGD_MTIA_BLADE8_PWROK_N","PWREN_MTIA_BLADE14_HSC_EN_N",
+	"PWRGD_MTIA_BLADE9_PWROK_N","PWREN_MTIA_BLADE15_HSC_EN_N",
+	"PWRGD_MTIA_BLADE10_PWROK_N","PWREN_MTIA_BLADE16_HSC_EN_N",
+	"PWRGD_MTIA_BLADE11_PWROK_N","PWREN_NW_BLADE1_HSC_EN_N",
+	"PWRGD_MTIA_BLADE12_PWROK_N","PWREN_NW_BLADE2_HSC_EN_N",
+	/*F0 - F7*/
+	"PWRGD_MTIA_BLADE13_PWROK_N","PWREN_NW_BLADE3_HSC_EN_N",
+	"PWRGD_MTIA_BLADE14_PWROK_N","PWREN_NW_BLADE4_HSC_EN_N",
+	"PWRGD_MTIA_BLADE15_PWROK_N","PWREN_NW_BLADE5_HSC_EN_N",
+	"PWRGD_MTIA_BLADE16_PWROK_N","PWREN_NW_BLADE6_HSC_EN_N",
+	"PWRGD_NW_BLADE1_PWROK_N","PWREN_SGPIO_FCB_2_EN_N",
+	"PWRGD_NW_BLADE2_PWROK_N","PWREN_SGPIO_FCB_1_EN_N",
+	"PWRGD_NW_BLADE3_PWROK_N","PWREN_SGPIO_FCB_4_EN_N",
+	"PWRGD_NW_BLADE4_PWROK_N","PWREN_SGPIO_FCB_3_EN_N",
+	/*G0 - G7*/
+	"PWRGD_NW_BLADE5_PWROK_N","PWREN_SGPIO_FCB_5_EN_N",
+	"PWRGD_NW_BLADE6_PWROK_N","PWREN_SGPIO_FCB_6_EN_N",
+	"PWRGD_FCB_1","FM_BMC_RST_RTCRST_R",
+	"PWRGD_FCB_2","",
+	"PWRGD_FCB_3","FM_MDIO_SW_SEL",
+	"PWRGD_FCB_4","FM_P24V_SMPWR_EN",
+	"PWRGD_FCB_6","",
+	"PWRGD_FCB_5","",
+	/*H0 - H7*/
+	"LEAK_DETECT_MTIA_BLADE1_N","",
+	"LEAK_DETECT_MTIA_BLADE2_N","",
+	"LEAK_DETECT_MTIA_BLADE3_N","",
+	"LEAK_DETECT_MTIA_BLADE4_N","",
+	"LEAK_DETECT_MTIA_BLADE5_N","",
+	"LEAK_DETECT_MTIA_BLADE6_N","",
+	"LEAK_DETECT_MTIA_BLADE7_N","ERR_INJECT_CMM_PWR_FAIL_N",
+	"LEAK_DETECT_MTIA_BLADE8_N","",
+	/*I0 - I7*/
+	"LEAK_DETECT_MTIA_BLADE9_N","RST_I2CRST_FCB_5_N",
+	"LEAK_DETECT_MTIA_BLADE10_N","RST_I2CRST_FCB_6_N",
+	"LEAK_DETECT_MTIA_BLADE11_N","RST_I2CRST_FCB_4_N",
+	"LEAK_DETECT_MTIA_BLADE12_N","RST_I2CRST_FCB_3_N",
+	"LEAK_DETECT_MTIA_BLADE13_N","RST_I2CRST_FCB_2_N",
+	"LEAK_DETECT_MTIA_BLADE14_N","RST_I2CRST_FCB_1_N",
+	"LEAK_DETECT_MTIA_BLADE15_N","BMC_READY",
+	"LEAK_DETECT_MTIA_BLADE16_N","FM_88E6393X_BIN_UPDATE_EN_N",
+	/*J0 - J7*/
+	"LEAK_DETECT_NW_BLADE1_N","WATER_VALVE_CLOSED_N",
+	"LEAK_DETECT_NW_BLADE2_N","",
+	"LEAK_DETECT_NW_BLADE3_N","",
+	"LEAK_DETECT_NW_BLADE4_N","",
+	"LEAK_DETECT_NW_BLADE5_N","",
+	"LEAK_DETECT_NW_BLADE6_N","",
+	"PWRGD_MTIA_BLADE1_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE2_HSC_PWROK_N","",
+	/*K0 - K7*/
+	"PWRGD_MTIA_BLADE3_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE4_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE5_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE6_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE7_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE8_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE9_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE10_HSC_PWROK_N","",
+	/*L0 - L7*/
+	"PWRGD_MTIA_BLADE11_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE12_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE13_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE14_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE15_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE16_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE1_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE2_HSC_PWROK_N","",
+	/*M0 - M7*/
+	"PWRGD_NW_BLADE3_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE4_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE5_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE6_HSC_PWROK_N","",
+	"RPU_READY","",
+	"IT_GEAR_RPU_LINK_N","",
+	"IT_GEAR_LEAK","",
+	"WATER_VALVE_CLOSED_N","",
+	/*N0 - N7*/
+	"VALVE_STATUS_0","",
+	"VALVE_STATUS_1","",
+	"PCA9555_IRQ1_N","",
+	"PCA9555_IRQ2_N","",
+	"CR_TOGGLE_BOOT_N","",
+	"IRQ_FCB_1_N","",
+	"IRQ_FCB_2_N","",
+	"CMM_CABLE_CARTRIDGE_PRSNT_BOT_N","",
+	/*O0 - O7*/
+	"CMM_CABLE_CARTRIDGE_PRSNT_TOP_N","",
+	"BOT_BCB_CABLE_PRSNT_N","",
+	"TOP_BCB_CABLE_PRSNT_N","",
+	"IRQ_FCB_3_N","",
+	"IRQ_FCB_4_N","",
+	"CHASSIS_LEAK0_DETECT_N","",
+	"CHASSIS_LEAK1_DETECT_N","",
+	"PCA9555_IRQ3_N","",
+	/*P0 - P7*/
+	"PCA9555_IRQ4_N","",
+	"PCA9555_IRQ5_N","",
+	"CMM_AC_PWR_BTN_N","",
+	"RPU_READY_SPARE","",
+	"IT_GEAR_LEAK_SPARE","",
+	"IT_GEAR_RPU_LINK_SPARE_N","",
+	"IRQ_FCB_6_N","",
+	"IRQ_FCB_5_N","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minipack.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minipack.dts
new file mode 100644
index 000000000000..aafd1042b6e5
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minipack.dts
@@ -0,0 +1,1339 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Minipack 100 BMC";
+	compatible = "facebook,minipack-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * Override the default serial aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+
+		/*
+		 * i2c switch 2-0070, pca9548, 8 child channels assigned
+		 * with bus number 16-23.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * i2c switch 8-0070, pca9548, 8 child channels assigned
+		 * with bus number 24-31.
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * i2c switch 9-0070, pca9548, 8 child channels assigned
+		 * with bus number 32-39.
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		/*
+		 * i2c switch 11-0070, pca9548, 8 child channels assigned
+		 * with bus number 40-47.
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		/*
+		 * I2C Switch 24-0071 (channel #0 of 8-0070): 8 channels for
+		 * connecting to left PDB (Power Distribution Board).
+		 */
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+
+		/*
+		 * I2C Switch 25-0072 (channel #1 of 8-0070): 8 channels for
+		 * connecting to right PDB (Power Distribution Board).
+		 */
+		i2c56 = &imux56;
+		i2c57 = &imux57;
+		i2c58 = &imux58;
+		i2c59 = &imux59;
+		i2c60 = &imux60;
+		i2c61 = &imux61;
+		i2c62 = &imux62;
+		i2c63 = &imux63;
+
+		/*
+		 * I2C Switch 26-0076 (channel #2 of 8-0070): 8 channels for
+		 * connecting to top FCM (Fan Control Module).
+		 */
+		i2c64 = &imux64;
+		i2c65 = &imux65;
+		i2c66 = &imux66;
+		i2c67 = &imux67;
+		i2c68 = &imux68;
+		i2c69 = &imux69;
+		i2c70 = &imux70;
+		i2c71 = &imux71;
+
+		/*
+		 * I2C Switch 27-0076 (channel #3 of 8-0070): 8 channels for
+		 * connecting to bottom FCM (Fan Control Module).
+		 */
+		i2c72 = &imux72;
+		i2c73 = &imux73;
+		i2c74 = &imux74;
+		i2c75 = &imux75;
+		i2c76 = &imux76;
+		i2c77 = &imux77;
+		i2c78 = &imux78;
+		i2c79 = &imux79;
+
+		/*
+		 * I2C Switch 40-0073 (channel #0 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #1 (1-based).
+		 */
+		i2c80 = &imux80;
+		i2c81 = &imux81;
+		i2c82 = &imux82;
+		i2c83 = &imux83;
+		i2c84 = &imux84;
+		i2c85 = &imux85;
+		i2c86 = &imux86;
+		i2c87 = &imux87;
+
+		/*
+		 * I2C Switch 41-0073 (channel #1 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #2 (1-based).
+		 */
+		i2c88 = &imux88;
+		i2c89 = &imux89;
+		i2c90 = &imux90;
+		i2c91 = &imux91;
+		i2c92 = &imux92;
+		i2c93 = &imux93;
+		i2c94 = &imux94;
+		i2c95 = &imux95;
+
+		/*
+		 * I2C Switch 42-0073 (channel #2 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #3 (1-based).
+		 */
+		i2c96 = &imux96;
+		i2c97 = &imux97;
+		i2c98 = &imux98;
+		i2c99 = &imux99;
+		i2c100 = &imux100;
+		i2c101 = &imux101;
+		i2c102 = &imux102;
+		i2c103 = &imux103;
+
+		/*
+		 * I2C Switch 43-0073 (channel #3 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #4 (1-based).
+		 */
+		i2c104 = &imux104;
+		i2c105 = &imux105;
+		i2c106 = &imux106;
+		i2c107 = &imux107;
+		i2c108 = &imux108;
+		i2c109 = &imux109;
+		i2c110 = &imux110;
+		i2c111 = &imux111;
+
+		/*
+		 * I2C Switch 44-0073 (channel #4 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #5 (1-based).
+		 */
+		i2c112 = &imux112;
+		i2c113 = &imux113;
+		i2c114 = &imux114;
+		i2c115 = &imux115;
+		i2c116 = &imux116;
+		i2c117 = &imux117;
+		i2c118 = &imux118;
+		i2c119 = &imux119;
+
+		/*
+		 * I2C Switch 45-0073 (channel #5 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #6 (1-based).
+		 */
+		i2c120 = &imux120;
+		i2c121 = &imux121;
+		i2c122 = &imux122;
+		i2c123 = &imux123;
+		i2c124 = &imux124;
+		i2c125 = &imux125;
+		i2c126 = &imux126;
+		i2c127 = &imux127;
+
+		/*
+		 * I2C Switch 46-0073 (channel #6 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #7 (1-based).
+		 */
+		i2c128 = &imux128;
+		i2c129 = &imux129;
+		i2c130 = &imux130;
+		i2c131 = &imux131;
+		i2c132 = &imux132;
+		i2c133 = &imux133;
+		i2c134 = &imux134;
+		i2c135 = &imux135;
+
+		/*
+		 * I2C Switch 47-0073 (channel #7 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #8 (1-based).
+		 */
+		i2c136 = &imux136;
+		i2c137 = &imux137;
+		i2c138 = &imux138;
+		i2c139 = &imux139;
+		i2c140 = &imux140;
+		i2c141 = &imux141;
+		i2c142 = &imux142;
+		i2c143 = &imux143;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+		bootargs = "debug console=ttyS1,9600n8 root=/dev/ram rw";
+	};
+};
+
+&wdt2 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+/*
+ * Both firmware flashes are 64MB on Minipack BMC.
+ */
+&fmc_flash0 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		 * u-boot partition: 384KB.
+		 */
+		u-boot@0 {
+			reg = <0x0 0x60000>;
+			label = "u-boot";
+		};
+
+		/*
+		 * u-boot environment variables: 128KB.
+		 */
+		u-boot-env@60000 {
+			reg = <0x60000 0x20000>;
+			label = "env";
+		};
+
+		/*
+		 * FIT image: 55.5 MB.
+		 */
+		fit@80000 {
+			reg = <0x80000 0x3780000>;
+			label = "fit";
+		};
+
+		/*
+		 * "data0" partition (8MB) is reserved for persistent
+		 * data store.
+		 */
+		data0@3800000 {
+			reg = <0x3800000 0x800000>;
+			label = "data0";
+		};
+
+		/*
+		 * "flash0" partition (covering the entire flash) is
+		 * explicitly created to avoid breaking legacy applications.
+		 */
+		flash0@0 {
+			reg = <0x0 0x4000000>;
+			label = "flash0";
+		};
+	};
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x4000000>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default
+		     &pinctrl_ncts1_default
+		     &pinctrl_ndsr1_default
+		     &pinctrl_ndtr1_default
+		     &pinctrl_nrts1_default>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	bus-frequency = <400000>;
+	multi-master;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/*
+	 * I2C Switch 2-0070 is connecting to SCM (System Controller
+	 * Module).
+	 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+	multi-master;
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		/*
+		 * I2C Switch 8-0070 channel #0: connecting to left PDB
+		 * (Power Distribution Board).
+		 */
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				imux48: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux49: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux50: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux51: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux52: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux53: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux54: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux55: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 8-0070 channel #1: connecting to right PDB
+		 * (Power Distribution Board).
+		 */
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				imux56: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux57: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux58: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux59: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux60: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux61: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux62: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux63: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 8-0070 channel #2: connecting to top FCM
+		 * (Fan Control Module).
+		 */
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux64: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux65: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux66: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux67: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux68: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux69: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux70: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux71: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 8-0070 channel #3: connecting to bottom
+		 * FCM (Fan Control Module).
+		 */
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux72: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux73: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux74: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux75: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux76: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux77: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux78: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux79: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	/*
+	 * I2C Switch 9-0070 is connecting to MAC/PHY EEPROMs on SMB
+	 * (Switch Main Board).
+	 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		/*
+		 * I2C Switch 11-0070 channel #0: connecting to PIM
+		 * (Port Interface Module) #1 (1-based).
+		 */
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux80: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux81: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux82: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux83: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux84: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux85: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux86: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux87: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #1: connecting to PIM
+		 * (Port Interface Module) #2 (1-based).
+		 */
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux88: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux89: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux90: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux91: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux92: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux93: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux94: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux95: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #2: connecting to PIM
+		 * (Port Interface Module) #3 (1-based).
+		 */
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux96: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux97: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux98: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux99: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux100: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux101: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux102: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux103: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #3: connecting to PIM
+		 * (Port Interface Module) #4 (1-based).
+		 */
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux104: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux105: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux106: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux107: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux108: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux109: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux110: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux111: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #4: connecting to PIM
+		 * (Port Interface Module) #5 (1-based).
+		 */
+		imux44: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux112: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux113: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux114: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux115: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux116: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux117: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux118: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux119: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #5: connecting to PIM
+		 * (Port Interface Module) #6 (1-based).
+		 */
+		imux45: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux120: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux121: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux122: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux123: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux124: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux125: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux126: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux127: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #6: connecting to PIM
+		 * (Port Interface Module) #7 (1-based).
+		 */
+		imux46: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux128: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux129: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux130: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux131: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux132: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux133: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux134: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux135: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #7: connecting to PIM
+		 * (Port Interface Module) #8 (1-based).
+		 */
+		imux47: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux136: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux137: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux138: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux139: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux140: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux141: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux142: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux143: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
new file mode 100644
index 000000000000..f74f463cc878
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
@@ -0,0 +1,1889 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2025 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Santabarbara BMC";
+	compatible = "facebook,santabarbara-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		i2c16 = &i2c4mux0ch0;
+		i2c17 = &i2c4mux0ch1;
+		i2c18 = &i2c4mux0ch2;
+		i2c19 = &i2c4mux0ch3;
+		i2c20 = &i2c4mux0ch4;
+		i2c21 = &i2c4mux0ch5;
+		i2c22 = &i2c4mux0ch6;
+		i2c23 = &i2c4mux0ch7;
+		i2c24 = &i2c5mux0ch0;
+		i2c25 = &i2c5mux0ch1;
+		i2c26 = &i2c5mux0ch2;
+		i2c27 = &i2c5mux0ch3;
+		i2c28 = &i2c5mux1ch0;
+		i2c29 = &i2c5mux1ch1;
+		i2c30 = &i2c5mux1ch2;
+		i2c31 = &i2c5mux1ch3;
+		i2c32 = &i2c12mux0ch0;
+		i2c33 = &i2c12mux0ch1;
+		i2c34 = &i2c12mux0ch2;
+		i2c35 = &i2c12mux0ch3;
+		i2c36 = &i2c12mux0ch4;
+		i2c37 = &i2c12mux0ch5;
+		i2c38 = &i2c12mux0ch6;
+		i2c39 = &i2c12mux0ch7;
+		i2c48 = &i2c6mux0ch0;
+		i2c49 = &i2c6mux0ch1;
+		i2c50 = &i2c6mux0ch2;
+		i2c51 = &i2c6mux0ch3;
+		i2c52 = &i2c8mux0ch0;
+		i2c53 = &i2c8mux0ch1;
+		i2c54 = &i2c8mux0ch2;
+		i2c55 = &i2c8mux0ch3;
+		i2c56 = &i2c10mux0ch0;
+		i2c57 = &i2c10mux0ch1;
+		i2c58 = &i2c10mux0ch2;
+		i2c59 = &i2c10mux0ch3;
+		i2c60 = &i2c13mux0ch0;
+		i2c61 = &i2c13mux0ch1;
+		i2c62 = &i2c13mux0ch2;
+		i2c63 = &i2c13mux0ch3;
+		i2c64 = &i2c6mux1ch0;
+		i2c65 = &i2c6mux1ch1;
+		i2c66 = &i2c6mux1ch2;
+		i2c67 = &i2c6mux1ch3;
+		i2c68 = &i2c8mux1ch0;
+		i2c69 = &i2c8mux1ch1;
+		i2c70 = &i2c8mux1ch2;
+		i2c71 = &i2c8mux1ch3;
+		i2c72 = &i2c10mux1ch0;
+		i2c73 = &i2c10mux1ch1;
+		i2c74 = &i2c10mux1ch2;
+		i2c75 = &i2c10mux1ch3;
+		i2c76 = &i2c13mux1ch0;
+		i2c77 = &i2c13mux1ch1;
+		i2c78 = &i2c13mux1ch2;
+		i2c79 = &i2c13mux1ch3;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "power_blue";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			label = "bmc_ready_noled";
+			gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	p3v3_bmc_aux: regulator-p3v3-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p3v3_bmc_aux";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	spi_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+		status = "okay";
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&adc0 {
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+	status = "okay";
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"rtc-battery-voltage-read-enable","","","BMC_READY",
+			"","led-identify","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"FM_MUX1_SEL_R","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"led-postcode-0","led-postcode-1",
+			"led-postcode-2","led-postcode-3",
+			"led-postcode-4","led-postcode-5",
+			"led-postcode-6","led-postcode-7",
+	/*O0-O7*/	"","","","","","","","debug-card-mux",
+	/*P0-P7*/	"power-button","","reset-button","",
+			"led-power","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","power-host-control","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","",
+				"FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1",
+				"FM_BOARD_BMC_REV_ID2","",
+	/*18C0-18C7*/	"SPI_BMC_BIOS_ROM_IRQ0_R_N","","","","","","","",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"FM_BMC_PROT_LS_EN","AC_PWR_BMC_BTN_R_N","","";
+};
+
+&i2c0 {
+	status = "okay";
+
+	// MB FRU
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <112 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"FM_NIC_PPS_IN_OE_N","FM_NIC_PPS_OUT_OE_N",
+			"FM_CPU0_TRIGGERTSC_OE_N","FM_NIC_PPS_IN_MUX_OE_N",
+			"FM_CPU0_CORETYPE0","FM_CPU0_CORETYPE1",
+			"FM_CPU0_CORETYPE2","FM_NIC_PPS_OUT_MUX_OE",
+			"CLKMUX_INPUT_LOSS_U45_R_N","FM_CPU0_SP7R1",
+			"FM_CPU0_SP7R2","FM_CPU0_SP7R3",
+			"FM_CPU0_SP7R4","",
+			"FM_NIC_PPS_IN_S0_R","FM_NIC_PPS_IN_S1_R";
+	};
+
+	fan-controller@21 {
+		compatible = "maxim,max31790";
+		reg = <0x21>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <116 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"FM_CBL_PRSNT_0A_N","FM_CBL_PRSNT_0B_N",
+			"FM_CBL_PRSNT_1A_N","FM_CBL_PRSNT_1B_N",
+			"FM_MODULE_PWRGD_0A","FM_MODULE_PWRGD_0B",
+			"CLKMUX_INPUT_LOSS_U88_R_N","FM_MODULE_PWRGD_1B",
+			"","",
+			"CLKMUX_INPUT_LOSS_U83_R_N","CLKMUX_INPUT_LOSS_U84_R_N",
+			"FM_P3V3_E1S_0_FAULT_R_N","FM_P3V3_E1S_1_FAULT_R_N",
+			"E1S_0_P12V_ADC_R_ALERT","E1S_1_P12V_ADC_R_ALERT";
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <114 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"FM_CBL_PRSNT_2A_N","FM_CBL_PRSNT_2B_N",
+			"FM_CBL_PRSNT_3A_N","FM_CBL_PRSNT_3B_N",
+			"FM_CBL_PRSNT_4A_N","FM_CBL_PRSNT_4B_N",
+			"FM_P3V3_NIC_400G_FAULT_R_N","FM_MODULE_PWRGD_2B",
+			"OCP_SFF_P12V_ADC_R_ALERT","FM_MODULE_PWRGD_3B",
+			"FM_THERMAL_ALERT_R_N","FM_MODULE_PWRGD_4B",
+			"FM_CBL_PRSNT_OSFP_A_N","FM_CBL_PRSNT_OSFP_B_N",
+			"FM_JTAG_MCIO_MUX_S0","FM_JTAG_MCIO_MUX_S1";
+	};
+
+	gpio@26 {
+		compatible = "nxp,pca9555";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <118 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"FAN_0_PRSNT_R1_N","FAN_1_PRSNT_R1_N",
+			"FAN_2_PRSNT_R1_N","FAN_3_PRSNT_R1_N",
+			"P12V_FAN_0_ADC_ALERT","P12V_FAN_1_ADC_ALERT",
+			"P12V_FAN_2_ADC_ALERT","P12V_FAN_3_ADC_ALERT",
+			"P12V_FAN0_PWRGD_R","P12V_FAN1_PWRGD_R",
+			"P12V_FAN2_PWRGD_R","P12V_FAN3_PWRGD_R",
+			"","","","";
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	sbrmi@3c {
+		compatible = "amd,sbrmi";
+		reg = <0x3c>;
+	};
+
+	sbtsi@4c {
+		compatible = "amd,sbtsi";
+		reg = <0x4c>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			// HPM Board ID EEPROM
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			// SCM Board ID EEPROM
+			eeprom@53 {
+				compatible = "atmel,24c128";
+				reg = <0x53>;
+			};
+		};
+
+		i2c4mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@42 {
+				compatible = "ti,ina230";
+				reg = <0x42>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina230";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@46 {
+				compatible = "ti,ina230";
+				reg = <0x46>;
+				shunt-resistor = <2000>;
+			};
+
+			voltage-sensor@48 {
+				compatible = "ti,ads7830";
+				reg = <0x48>;
+				vref-supply = <&p3v3_bmc_aux>;
+			};
+
+			voltage-sensor@4a {
+				compatible = "ti,ads7830";
+				reg = <0x4a>;
+				vref-supply = <&p3v3_bmc_aux>;
+			};
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+
+			temperature-sensor@4e {
+				compatible = "ti,tmp75";
+				reg = <0x4e>;
+			};
+		};
+
+		i2c4mux0ch4: i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch5: i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch6: i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@42 {
+				compatible = "ti,ina230";
+				reg = <0x42>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina230";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@46 {
+				compatible = "ti,ina230";
+				reg = <0x46>;
+				shunt-resistor = <2000>;
+			};
+
+			voltage-sensor@48 {
+				compatible = "ti,ads7830";
+				reg = <0x48>;
+			};
+		};
+
+		i2c4mux0ch7: i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+
+			// FIO FRU
+			eeprom@53 {
+				compatible = "atmel,24c512";
+				reg = <0x53>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	// E1S BP FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux1ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			voltage-sensor@48 {
+				compatible = "ti,ads7830";
+				reg = <0x48>;
+			};
+		};
+
+		i2c5mux1ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+		};
+
+		i2c5mux1ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina230";
+				reg = <0x41>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina230";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+				shunt-resistor = <2000>;
+			};
+		};
+
+		i2c5mux1ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@74 {
+				compatible = "nxp,pca9539";
+				reg = <0x74>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"P12V_E1S_ADC_ALERT","BUFF0_100M_LOSB_PLD",
+					"E1S_BP_SKU_ID0","E1S_BP_SKU_ID1",
+					"E1S_BP_SKU_ID2","E1S_BP_REV_ID0",
+					"E1S_BP_REV_ID1","E1S_BP_REV_ID2",
+					"P3V3_E1S_1_FAULT_R_N","P3V3_E1S_2_FAULT_R_N",
+					"P3V3_E1S_3_FAULT_R_N","P3V3_E1S_4_FAULT_R_N",
+					"P12V_E1S_1_FAULT_R_N","P12V_E1S_2_FAULT_R_N",
+					"P12V_E1S_3_FAULT_R_N","P12V_E1S_4_FAULT_R_N";
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	// Rainbow0 FRU
+	eeprom@52 {
+		compatible = "atmel,24c256";
+		reg = <0x52>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@64 {
+				compatible = "microchip,mcp9600";
+				reg = <0x64>;
+			};
+
+			temperature-sensor@65 {
+				compatible = "microchip,mcp9600";
+				reg = <0x65>;
+			};
+
+			temperature-sensor@67 {
+				compatible = "microchip,mcp9600";
+				reg = <0x67>;
+			};
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9546";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c6mux1ch0: i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c6mux1ch1: i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					voltage-sensor@48 {
+						compatible = "ti,ads7830";
+						reg = <0x48>;
+					};
+
+					voltage-sensor@49 {
+						compatible = "ti,ads7830";
+						reg = <0x49>;
+					};
+
+					temperature-sensor@4a {
+						compatible = "ti,tmp175";
+						reg = <0x4a>;
+					};
+
+					temperature-sensor@4b {
+						compatible = "ti,tmp175";
+						reg = <0x4b>;
+					};
+
+					eeprom@56 {
+						compatible = "atmel,24c256";
+						reg = <0x56>;
+					};
+				};
+
+				i2c6mux1ch2: i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c6mux1ch3: i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		i2c6mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			potentiometer@2c {
+				compatible = "adi,ad5272-020";
+				reg = <0x2c>;
+			};
+
+			potentiometer@2e {
+				compatible = "adi,ad5272-020";
+				reg = <0x2e>;
+			};
+
+			potentiometer@2f {
+				compatible = "adi,ad5272-020";
+				reg = <0x2f>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c6mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			potentiometer@2c {
+				compatible = "adi,ad5272-020";
+				reg = <0x2c>;
+			};
+
+			potentiometer@2e {
+				compatible = "adi,ad5272-020";
+				reg = <0x2e>;
+			};
+
+			potentiometer@2f {
+				compatible = "adi,ad5272-020";
+				reg = <0x2f>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c6mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			voltage-sensor@1d {
+				compatible = "ti,adc128d818";
+				reg = <0x1d>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			voltage-sensor@37 {
+				compatible = "ti,adc128d818";
+				reg = <0x37>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp175";
+				reg = <0x48>;
+			};
+
+			temperature-sensor@49 {
+				compatible = "ti,tmp175";
+				reg = <0x49>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	// Rainbow2 FRU
+	eeprom@52 {
+		compatible = "atmel,24c256";
+		reg = <0x52>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c8mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@64 {
+				compatible = "microchip,mcp9600";
+				reg = <0x64>;
+			};
+
+			temperature-sensor@65 {
+				compatible = "microchip,mcp9600";
+				reg = <0x65>;
+			};
+
+			temperature-sensor@67 {
+				compatible = "microchip,mcp9600";
+				reg = <0x67>;
+			};
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9546";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c8mux1ch0: i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c8mux1ch1: i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					voltage-sensor@48 {
+						compatible = "ti,ads7830";
+						reg = <0x48>;
+					};
+
+					voltage-sensor@49 {
+						compatible = "ti,ads7830";
+						reg = <0x49>;
+					};
+
+					temperature-sensor@4a {
+						compatible = "ti,tmp175";
+						reg = <0x4a>;
+					};
+
+					temperature-sensor@4b {
+						compatible = "ti,tmp175";
+						reg = <0x4b>;
+					};
+
+					eeprom@56 {
+						compatible = "atmel,24c256";
+						reg = <0x56>;
+					};
+				};
+
+				i2c8mux1ch2: i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c8mux1ch3: i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		i2c8mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			potentiometer@2c {
+				compatible = "adi,ad5272-020";
+				reg = <0x2c>;
+			};
+
+			potentiometer@2e {
+				compatible = "adi,ad5272-020";
+				reg = <0x2e>;
+			};
+
+			potentiometer@2f {
+				compatible = "adi,ad5272-020";
+				reg = <0x2f>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c8mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			potentiometer@2c {
+				compatible = "adi,ad5272-020";
+				reg = <0x2c>;
+			};
+
+			potentiometer@2e {
+				compatible = "adi,ad5272-020";
+				reg = <0x2e>;
+			};
+
+			potentiometer@2f {
+				compatible = "adi,ad5272-020";
+				reg = <0x2f>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c8mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			voltage-sensor@1d {
+				compatible = "ti,adc128d818";
+				reg = <0x1d>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			voltage-sensor@37 {
+				compatible = "ti,adc128d818";
+				reg = <0x37>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp175";
+				reg = <0x48>;
+			};
+
+			temperature-sensor@49 {
+				compatible = "ti,tmp175";
+				reg = <0x49>;
+			};
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	// SCM FRU
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	// BSM FRU
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	// Rainbow3 FRU
+	eeprom@52 {
+		compatible = "atmel,24c256";
+		reg = <0x52>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c10mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@64 {
+				compatible = "microchip,mcp9600";
+				reg = <0x64>;
+			};
+
+			temperature-sensor@65 {
+				compatible = "microchip,mcp9600";
+				reg = <0x65>;
+			};
+
+			temperature-sensor@67 {
+				compatible = "microchip,mcp9600";
+				reg = <0x67>;
+			};
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9546";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c10mux1ch0: i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c10mux1ch1: i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					voltage-sensor@48 {
+						compatible = "ti,ads7830";
+						reg = <0x48>;
+					};
+
+					voltage-sensor@49 {
+						compatible = "ti,ads7830";
+						reg = <0x49>;
+					};
+
+					temperature-sensor@4a {
+						compatible = "ti,tmp175";
+						reg = <0x4a>;
+					};
+
+					temperature-sensor@4b {
+						compatible = "ti,tmp175";
+						reg = <0x4b>;
+					};
+
+					eeprom@56 {
+						compatible = "atmel,24c256";
+						reg = <0x56>;
+					};
+				};
+
+				i2c10mux1ch2: i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c10mux1ch3: i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		i2c10mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			potentiometer@2c {
+				compatible = "adi,ad5272-020";
+				reg = <0x2c>;
+			};
+
+			potentiometer@2e {
+				compatible = "adi,ad5272-020";
+				reg = <0x2e>;
+			};
+
+			potentiometer@2f {
+				compatible = "adi,ad5272-020";
+				reg = <0x2f>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c10mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			potentiometer@2c {
+				compatible = "adi,ad5272-020";
+				reg = <0x2c>;
+			};
+
+			potentiometer@2e {
+				compatible = "adi,ad5272-020";
+				reg = <0x2e>;
+			};
+
+			potentiometer@2f {
+				compatible = "adi,ad5272-020";
+				reg = <0x2f>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c10mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			voltage-sensor@1d {
+				compatible = "ti,adc128d818";
+				reg = <0x1d>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			voltage-sensor@37 {
+				compatible = "ti,adc128d818";
+				reg = <0x37>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp175";
+				reg = <0x48>;
+			};
+
+			temperature-sensor@49 {
+				compatible = "ti,tmp175";
+				reg = <0x49>;
+			};
+		};
+	};
+};
+
+&i2c11 {
+	multi-master;
+	mctp-controller;
+	status = "okay";
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC FRU
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	// SWB FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9548";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c12mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+		};
+
+		i2c12mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@42 {
+				compatible = "mps,mp2971";
+				reg = <0x42>;
+			};
+
+			power-monitor@43 {
+				compatible = "mps,mp2971";
+				reg = <0x43>;
+			};
+		};
+
+		i2c12mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina230";
+				reg = <0x41>;
+				shunt-resistor = <2000>;
+			};
+		};
+
+		i2c12mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@44 {
+				compatible = "ti,ina230";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+				shunt-resistor = <2000>;
+			};
+		};
+
+		i2c12mux0ch4: i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			voltage-sensor@49 {
+				compatible = "ti,ads7830";
+				reg = <0x49>;
+			};
+		};
+
+		i2c12mux0ch5: i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c12mux0ch6: i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c12mux0ch7: i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	// Rainbow1 FRU
+	eeprom@52 {
+		compatible = "atmel,24c256";
+		reg = <0x52>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c13mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@64 {
+				compatible = "microchip,mcp9600";
+				reg = <0x64>;
+			};
+
+			temperature-sensor@65 {
+				compatible = "microchip,mcp9600";
+				reg = <0x65>;
+			};
+
+			temperature-sensor@67 {
+				compatible = "microchip,mcp9600";
+				reg = <0x67>;
+			};
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9546";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c13mux1ch0: i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c13mux1ch1: i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					voltage-sensor@48 {
+						compatible = "ti,ads7830";
+						reg = <0x48>;
+					};
+
+					voltage-sensor@49 {
+						compatible = "ti,ads7830";
+						reg = <0x49>;
+					};
+
+					temperature-sensor@4a {
+						compatible = "ti,tmp175";
+						reg = <0x4a>;
+					};
+
+					temperature-sensor@4b {
+						compatible = "ti,tmp175";
+						reg = <0x4b>;
+					};
+
+					eeprom@56 {
+						compatible = "atmel,24c256";
+						reg = <0x56>;
+					};
+				};
+
+				i2c13mux1ch2: i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c13mux1ch3: i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		i2c13mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			potentiometer@2c {
+				compatible = "adi,ad5272-020";
+				reg = <0x2c>;
+			};
+
+			potentiometer@2e {
+				compatible = "adi,ad5272-020";
+				reg = <0x2e>;
+			};
+
+			potentiometer@2f {
+				compatible = "adi,ad5272-020";
+				reg = <0x2f>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c13mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			potentiometer@2c {
+				compatible = "adi,ad5272-020";
+				reg = <0x2c>;
+			};
+
+			potentiometer@2e {
+				compatible = "adi,ad5272-020";
+				reg = <0x2e>;
+			};
+
+			potentiometer@2f {
+				compatible = "adi,ad5272-020";
+				reg = <0x2f>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c13mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			voltage-sensor@1d {
+				compatible = "ti,adc128d818";
+				reg = <0x1d>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			voltage-sensor@37 {
+				compatible = "ti,adc128d818";
+				reg = <0x37>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp175";
+				reg = <0x48>;
+			};
+
+			temperature-sensor@49 {
+				compatible = "ti,tmp175";
+				reg = <0x49>;
+			};
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8>;
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&mac2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	use-ncsi;
+	status = "okay";
+};
+
+&mac3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+	status = "okay";
+};
+
+&sgpiom0 {
+	ngpios = <128>;
+	bus-frequency = <2000000>;
+	gpio-line-names =
+	/*in - out - in - out */
+	/*A0-A3 line 0-7*/
+	"PDB1_HSC_PWR_OK","power-chassis-control",
+	"PDB2_HSC_PWR_OK","FM_MODULE_PWRGD_0A_OUT",
+	"PWRGD_P12V_MEM","FM_MODULE_PWRGD_0B_OUT",
+	"PWRGD_P12V_SCM","FM_MODULE_PWRGD_1B_OUT",
+	/*A4-A7 line 8-15*/
+	"PWRGD_P12V_FAN","FM_MODULE_PWRGD_2B_OUT",
+	"PWRGD_P5V_AUX","FM_MODULE_PWRGD_3B_OUT",
+	"power-chassis-good","FM_MODULE_PWRGD_4B_OUT",
+	"PWRGD_P1V8_LDO","FM_CBL_PRSNT_0A_N_OUT",
+	/*B0-B3 line 16-23*/
+	"PWRGD_P1V_LDO","FM_CBL_PRSNT_0B_N_OUT",
+	"PWRGD_PVDD33_S5","FM_CBL_PRSNT_1A_N_OUT",
+	"PWRGD_PVDD18_S5_P0","FM_CBL_PRSNT_1B_N_OUT",
+	"CPU0_SLP_S5_N","FM_CBL_PRSNT_2A_N_OUT",
+	/*B4-B7 line 24-31*/
+	"PWRGD_PVDDIO_MEM_S3_P0","FM_CBL_PRSNT_2B_N_OUT",
+	"CPU0_SLP_S3_N","FM_CBL_PRSNT_3A_N_OUT",
+	"FM_MODULE_PWRGD_1B","FM_CBL_PRSNT_3B_N_OUT",
+	"FM_MODULE_PWRGD_2B","FM_CBL_PRSNT_4A_N_OUT",
+	/*C0-C3 line 32-39*/
+	"FM_MODULE_PWRGD_3B","FM_CBL_PRSNT_4B_N_OUT",
+	"FM_MODULE_PWRGD_4B","P12V_FAN0_PWRGD_OUT",
+	"FM_MODULE_PWRGD_0B","P12V_FAN1_PWRGD_OUT",
+	"PWRGD_PVDDIO_P0","P12V_FAN2_PWRGD_OUT",
+	/*C4-C7 line 40-47*/
+	"PWRGD_PVDDCR_SOC_P0","P12V_FAN3_PWRGD_OUT",
+	"PWRGD_PVDDCR_CPU0_P0","P12V_FAN4_PWRGD_OUT",
+	"PWRGD_PVDDCR_CPU1_P0","P12V_FAN5_PWRGD_OUT",
+	"FM_CPU0_PWR_GOOD","P12V_FAN6_PWRGD_OUT",
+	/*D0-D3 line 48-55*/
+	"host0-ready","P12V_FAN7_PWRGD_OUT",
+	"FM_PWRGD_CPU0_PWROK","FAN_0_PRSNT_R1_N_OUT",
+	"FM_RST_CPU0_RESETL_N","FAN_1_PRSNT_R1_N_OUT",
+	"RST_CPU0_PERST0_R_N","FAN_2_PRSNT_R1_N_OUT",
+	/*D4-D7 line 56-63*/
+	"RST_CPU0_PERST1_R_N","FAN_3_PRSNT_R1_N_OUT",
+	"BIOS_POST_CMPLT","FAN_4_PRSNT_R1_N_OUT",
+	"","FAN_5_PRSNT_R1_N_OUT",
+	"","FAN_6_PRSNT_R1_N_OUT",
+	/*E0-E3 line 64-71*/
+	"FM_PWRGD_CHAD_CPU0","FAN_7_PRSNT_R1_N_OUT",
+	"FM_PWRGD_CHEH_CPU0","TRAY_SLOT_ID0_OUT",
+	"FM_PWRGD_CHIL_CPU0","TRAY_SLOT_ID1_OUT",
+	"FM_PWRGD_CHMP_CPU0","TRAY_SLOT_ID2_OUT",
+	/*E4-E7 line 72-79*/
+	"P12V_E1S_0_PWRGD","TRAY_SLOT_ID3_OUT",
+	"P12V_E1S_1_PWRGD","TRAY_SLOT_ID4_OUT",
+	"P3V3_E1S_0_PWRGD","SCM_JTAG_MUX_S0_R",
+	"P3V3_E1S_1_PWRGD","SCM_JTAG_MUX_S1_R",
+	/*F0-F3 line 80-87*/
+	"FM_MODULE_PWRGD_0A","BMC_SGPIO_READY",
+	"OCP_V3_1_P3V3_PLD_R_PWRGD","CPU0_SYS_RESET_N",
+	"P12V_OCP_V3_1_PLD_PWRGD","RST_CPU0_KBRST_N",
+	"PWRGD_OCP_SFF_PWR_GOOD","BIOS_DEBUG_MODE",
+	/*F4-F7 line 88-95*/
+	"","CLR_CMOS",
+	"","I3C_SPD_MUX_FORCE_SEL",
+	"","FM_JTAG_HOST_SEL",
+	"","TRAY_PRESENT_N",
+	/*G0-G3 line 96-103*/
+	"MB_REV_ID_0","UART_BMC_SEL0",
+	"MB_REV_ID_1","UART_BMC_SEL1",
+	"MB_REV_ID_2","SCM_USB_SEL",
+	"MB_SKU_ID_0","FORCE_ALL_PWRON",
+	/*G4-G7 line 104-111*/
+	"MB_SKU_ID_1","PASSWORD_CLEAR",
+	"MB_SKU_ID_2","",
+	"MB_SKU_ID_3","",
+	"","BIOS_DEBUG_MODE",
+	/*H0-H3 line 112-119*/
+	"FM_IOEXP_U538_INT_N","",
+	"FM_IOEXP_U539_INT_N","",
+	"FM_IOEXP_U540_INT_N","",
+	"FM_IOEXP_U541_INT_N","",
+	/*H4-H7 line 120-127*/
+	"FM_IOEXP_PDB2_U1003_INT_N","",
+	"","",
+	"","",
+	"FM_MAIN_PWREN_RMC_EN_ISO_R","",
+	/*I0-I3 line 128-135*/
+	"","","","",
+	"PDB_IRQ_PMBUS_ALERT_ISO_R_N","",
+	"PDB_UV_ALERT_ISO_R_N","",
+	/*I4-I7 line 136-143*/
+	"P12V_SCM_ADC_ALERT","",
+	"CPU0_REGS_I2C_ALERT_N","",
+	"FM_RTC_ALERT_N","",
+	"P0_I3C_APML_ALERT_L","",
+	/*J0-J3 line 144-151*/
+	"SMB_RJ45_FIO_TMP_ALERT","",
+	"FM_SMB_ALERT_MCIO_0A_N","",
+	"I3C_MCIO_0B_ALERT_ISO_R_N","",
+	"FM_SMB_ALERT_MCIO_1A_N","",
+	/*J4-J7 line 152-159*/
+	"I3C_MCIO_1B_ALERT_ISO_R_N","",
+	"FM_SMB_ALERT_MCIO_2A_N","",
+	"I3C_MCIO_2B_ALERT_ISO_R_N","",
+	"FM_SMB_ALERT_MCIO_3A_N","",
+	/*K0-K3 line 160-167*/
+	"I3C_MCIO_3B_ALERT_ISO_R_N","",
+	"FM_SMB_ALERT_MCIO_4A_N","",
+	"I3C_MCIO_4B_ALERT_ISO_R_N","",
+	"","",
+	/*K4-K7 line 168-175*/
+	"","","","","","","","",
+	/*L0-L3 line 176-183*/
+	"FM_CPU0_THERMTRIP_N","",
+	"FM_CPU0_PROCHOT_N","",
+	"FM_CPU0_SMERR_N","",
+	"FM_PVDDCR_CPU0_P0_OCP_N","",
+	/*L4-L7 line 184-191*/
+	"FM_PVDDCR_CPU1_P0_OCP_N","",
+	"FM_PVDDCR_SOC_P0_OCP_N","",
+	"FM_OCP_PWRBRK_R_N","",
+	"PMIC_ERROR_N","",
+	/*M0-M3 line 192-199*/
+	"","","","","","","","",
+	/*M4-M7 line 200-207*/
+	"","","","","","","","",
+	/*N0-N3 line 208-215*/
+	"FM_PRSNT_CPU0_N","",
+	"OCP_SFF_PRSNT_N","",
+	"E1S_0_PRSNT_R_N","",
+	"E1S_BP_0_PRSNT_R_N","",
+	/*N4-N7 line 216-223*/
+	"E1S_BP_1_PRSNT_R_N","",
+	"E1S_BP_2_PRSNT_R_N","",
+	"E1S_BP_3_PRSNT_R_N","",
+	"PDB_PRSNT_J311_N","",
+	/*O0-O3 line 224-231*/
+	"PDB_PRSNT_J312_N","",
+	"PDB_PRSNT_J313_N","",
+	"PDB_PRSNT_J314_N","",
+	"PRSNT_RJ45_FIO_N_R","",
+	/*O4-O7 line 232-239*/
+	"PRSNT_LEAK_CABLE_1_R_N","",
+	"PRSNT_LEAK_CABLE_2_R_N","",
+	"PRSNT_HDT_N","",
+	"LEAK_SWB_COLDPLATE","",
+	/*P0-P3 line 240-247*/
+	"LEAK_R3_COLDPLATE","",
+	"LEAK_R2_COLDPLATE","",
+	"LEAK_R1_COLDPLATE","",
+	"LEAK_R0_COLDPLATE","",
+	/*P4-P7 line 248-255*/
+	"LEAK_MB_COLDPLATE","",
+	"LEAK_PDB1_RIGHT_MANIFOLD","",
+	"LEAK_PDB1_LEFT_MANIFOLD","",
+	"LEAK_MB_MANIFOLD","";
+	status = "okay";
+};
+
+// BIOS Flash
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+	status = "okay";
+
+	flash@0 {
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <12000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		status = "okay";
+	};
+};
+
+// HOST BIOS Debug
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+// BMC Debug Console
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&wdt1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts
new file mode 100644
index 000000000000..5d4c7d979f1e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts
@@ -0,0 +1,549 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+// Author: Vijay Khemka <vijaykhemka@fb.com>
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook TiogaPass BMC";
+	compatible = "facebook,tiogapass-bmc", "aspeed,ast2500";
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+
+		/*
+		 * Hardcode the bus number of i2c switches' channels to
+		 * avoid breaking the legacy applications.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+	};
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			      <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&lpc_ctrl {
+	// Enable lpc clock
+	status = "okay";
+};
+
+&uart1 {
+	// Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	// SoL Host Console
+	status = "okay";
+};
+
+&uart3 {
+	// SoL BMC Console
+	status = "okay";
+};
+
+&uart5 {
+	// BMC Console
+	status = "okay";
+};
+
+&kcs2 {
+	// BMC KCS channel 2
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	// BMC KCS channel 3
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"BMC_CPLD_FPGA_SEL","","","","","","","",
+	/*B0-B7*/	"","BMC_DEBUG_EN","","","","BMC_PPIN","PS_PWROK",
+			"IRQ_PVDDQ_GHJ_VRHOT_LVT3",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"BIOS_MRC_DEBUG_MSG_DIS","BOARD_REV_ID0","",
+			"BOARD_REV_ID1","IRQ_DIMM_SAVE_LVT3","BOARD_REV_ID2",
+			"CPU_ERR0_LVT3_BMC","CPU_ERR1_LVT3_BMC",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON",
+			"POWER_OUT","NMI_BUTTON","","CPU0_PROCHOT_LVT3_ BMC",
+			"CPU1_PROCHOT_LVT3_ BMC",
+	/*F0-F7*/	"IRQ_PVDDQ_ABC_VRHOT_LVT3","",
+			"IRQ_PVCCIN_CPU0_VRHOT_LVC3",
+			"IRQ_PVCCIN_CPU1_VRHOT_LVC3",
+			"IRQ_PVDDQ_KLM_VRHOT_LVT3","","P3VBAT_BRIDGE_EN","",
+	/*G0-G7*/	"CPU_ERR2_LVT3","CPU_CATERR_LVT3","PCH_BMC_THERMTRIP",
+			"CPU0_SKTOCC_LVT3","","","","BIOS_SMI_ACTIVE",
+	/*H0-H7*/	"LED_POST_CODE_0","LED_POST_CODE_1","LED_POST_CODE_2",
+			"LED_POST_CODE_3","LED_POST_CODE_4","LED_POST_CODE_5",
+			"LED_POST_CODE_6","LED_POST_CODE_7",
+	/*I0-I7*/	"CPU0_FIVR_FAULT_LVT3","CPU1_FIVR_FAULT_LVT3",
+			"FORCE_ADR","UV_ADR_TRIGGER_EN","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"IRQ_UV_DETECT","IRQ_OC_DETECT","HSC_TIMER_EXP","",
+			"MEM_THERM_EVENT_PCH","PMBUS_ALERT_BUF_EN","","",
+	/*M0-M7*/	"CPU0_RC_ERROR","CPU1_RC_ERROR","","OC_DETECT_EN",
+			"CPU0_THERMTRIP_LATCH_LVT3",
+			"CPU1_THERMTRIP_LATCH_LVT3","","",
+	/*N0-N7*/	"","","","CPU_MSMI_LVT3","","BIOS_SPI_BMC_CTRL","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"BOARD_SKU_ID0","BOARD_SKU_ID1","BOARD_SKU_ID2",
+			"BOARD_SKU_ID3","BOARD_SKU_ID4","BMC_PREQ",
+			"BMC_PWR_DEBUG","RST_RSMRST",
+	/*Q0-Q7*/	"","","","","UARTSW_LSB","UARTSW_MSB",
+			"POST_CARD_PRES_BMC","PE_BMC_WAKE",
+	/*R0-R7*/	"","","BMC_TCK_MUX_SEL","BMC_PRDY",
+			"BMC_XDP_PRSNT_IN","RST_BMC_PLTRST_BUF","SLT_CFG0",
+			"SLT_CFG1",
+	/*S0-S7*/	"THROTTLE","BMC_READY","","HSC_SMBUS_SWITCH_EN","",
+			"","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","BMC_FAULT","","",
+	/*V0-V7*/	"","","","FAST_PROCHOT_EN","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","GLOBAL_RST_WARN",
+			"CPU0_MEMABC_MEMHOT_LVT3_BMC",
+			"CPU0_MEMDEF_MEMHOT_LVT3_BMC",
+			"CPU1_MEMGHJ_MEMHOT_LVT3_BMC",
+			"CPU1_MEMKLM_MEMHOT_LVT3_BMC",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","BMC_JTAG_SEL","SIO_ONCONTROL","",
+			"","","",
+	/*Z0-Z7*/	"","SIO_POWER_GOOD","IRQ_PVDDQ_DEF_VRHOT_LVT3","",
+			"","","","",
+	/*AA0-AA7*/	"CPU1_SKTOCC_LVT3","IRQ_SML1_PMBUS_ALERT",
+			"SERVER_POWER_LED","","PECI_MUX_SELECT","UV_HIGH_SET",
+			"","POST_COMPLETE",
+	/*AB0-AB7*/	"IRQ_HSC_FAULT","OCP_MEZZA_PRES","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii2_default>;
+	use-ncsi;
+};
+
+&adc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	//Airmax Conn B, CPU0 PIROM, CPU1 PIROM
+};
+
+&i2c1 {
+	status = "okay";
+	//X24 Riser
+	i2c-mux@71 {
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			ina230@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+			tmp75@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			tmp421@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+
+				imux20: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux21: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux22: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux23: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+			};
+
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ina230@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+			tmp421@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			tmp421@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+
+				imux24: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux25: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux26: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux27: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+			};
+
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			ina230@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+			tmp421@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			tmp421@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+
+				imux28: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux29: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux30: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux31: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+			};
+
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-switch@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+			};
+
+			i2c-switch@41 {
+				compatible = "ti,ina230";
+				reg = <0x41>;
+			};
+
+			i2c-switch@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+		};
+
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	// Mezz Management SMBus
+};
+
+&i2c3 {
+	status = "okay";
+	// SMBus to Board ID EEPROM
+};
+
+&i2c4 {
+	status = "okay";
+	// BMC Debug Header
+	ipmb0@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	// CPU Voltage regulators
+	regulator@48 {
+		compatible = "infineon,pxe1610";
+		reg = <0x48>;
+	};
+	regulator@4a {
+		compatible = "infineon,pxe1610";
+		reg = <0x4a>;
+	};
+	regulator@50 {
+		compatible = "infineon,pxe1610";
+		reg = <0x50>;
+	};
+	regulator@52 {
+		compatible = "infineon,pxe1610";
+		reg = <0x52>;
+	};
+	regulator@58 {
+		compatible = "infineon,pxe1610";
+		reg = <0x58>;
+	};
+	regulator@5a {
+		compatible = "infineon,pxe1610";
+		reg = <0x5a>;
+	};
+	regulator@68 {
+		compatible = "infineon,pxe1610";
+		reg = <0x68>;
+	};
+	regulator@70 {
+		compatible = "infineon,pxe1610";
+		reg = <0x70>;
+	};
+	regulator@72 {
+		compatible = "infineon,pxe1610";
+		reg = <0x72>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+	};
+	tmp421@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	//HSC, AirMax Conn A
+	adm1278@45 {
+		compatible = "adi,adm1275";
+		reg = <0x45>;
+		shunt-resistor-micro-ohms = <250>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	tmp421@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+	//Mezz Sensor SMBus
+};
+
+&i2c9 {
+	status = "okay";
+	//USB Debug Connector
+	ipmb0@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge100.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge100.dts
new file mode 100644
index 000000000000..97cd11c3d9a5
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge100.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2400-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Wedge 100 BMC";
+	compatible = "facebook,wedge100-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+	};
+};
+
+&wdt2 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+&fmc {
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.1";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1@0 {
+				reg = <0x0 0x2000000>;
+				label = "flash1";
+			};
+		};
+	};
+};
+
+&i2c7 {
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge40.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge40.dts
new file mode 100644
index 000000000000..6624855d8ebd
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge40.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2400-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Wedge 40 BMC";
+	compatible = "facebook,wedge40-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+	};
+};
+
+&wdt2 {
+	status = "disabled";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		     &pinctrl_pwm1_default
+		     &pinctrl_pwm6_default
+		     &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts
new file mode 100644
index 000000000000..1d46eaee8656
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2019 Facebook Inc.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Wedge 400 BMC (64MB Datastore)";
+	compatible = "facebook,wedge400-data64-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (11-0076) provides 8 channels connecting to
+		 * FCM (Fan Controller Module).
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		spi2 = &spi_gpio;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			      <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>;
+	};
+
+	/*
+	 * GPIO-based SPI Master is required to access SPI TPM, because
+	 * full-duplex SPI transactions are not supported by ASPEED SPI
+	 * Controllers.
+	 */
+	spi_gpio: spi {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+		sck-gpios = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+/*
+ * Both firmware flashes are 128MB on Wedge400 BMC.
+ */
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout-128-data64.dtsi"
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x8000000>;
+			label = "flash1";
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+/*
+ * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC
+ * communication.
+ */
+&i2c0 {
+	status = "okay";
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x76>;
+		i2c-mux-idle-disconnect;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&sdhci1 {
+	max-frequency = <25000000>;
+	/*
+	 * DMA mode needs to be disabled to avoid conflicts with UHCI
+	 * Controller in AST2500 SoC.
+	 */
+	sdhci-caps-mask = <0x0 0x580000>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
new file mode 100644
index 000000000000..ef0cfc51cda4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2019 Facebook Inc.
+
+#include "aspeed-bmc-facebook-wedge400-data64.dts"
+
+/ {
+	model = "Facebook Wedge 400 BMC";
+	compatible = "facebook,wedge400-bmc", "aspeed,ast2500";
+};
+
+&fmc_flash0 {
+	/delete-node/partitions;
+#include "facebook-bmc-flash-layout-128.dtsi"
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yamp.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yamp.dts
new file mode 100644
index 000000000000..98fe0d6c8188
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yamp.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook YAMP 100 BMC";
+	compatible = "facebook,yamp-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * Override the default uart aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
+	};
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&mac1 {
+	status = "disabled";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout.dtsi"
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x2000000>;
+			label = "flash1";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
new file mode 100644
index 000000000000..e4172be84e7f
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -0,0 +1,1398 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Yosemite 4 BMC";
+	compatible = "facebook,yosemite4-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+		serial7 = &uart8;
+		serial8 = &uart9;
+
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ramoops@b8dfa000 {
+			compatible = "ramoops";
+			reg = <0xb8dfa000 0x6000>;
+			record-size = <0x2000>;
+			console-size = <0x2000>;
+			pmsg-size = <0x2000>;
+			max-reason = <1>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+				<&adc1 0>, <&adc1 1>, <&adc1 7>;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			reg = <0>;
+			spi-max-frequency = <33000000>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart6 {
+	status = "okay";
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&wdt2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst2_default>;
+	aspeed,reset-type = "system";
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	use-ncsi;
+	mellanox,multi-host;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+	mellanox,multi-host;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT1_UART_SEL0","SLOT1_UART_SEL1",
+				"SLOT1_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT2_UART_SEL0","SLOT2_UART_SEL1",
+				"SLOT2_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT3_UART_SEL0","SLOT3_UART_SEL1",
+				"SLOT3_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT4_UART_SEL0","SLOT4_UART_SEL1",
+				"SLOT4_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT5_UART_SEL0","SLOT5_UART_SEL1",
+				"SLOT5_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT6_UART_SEL0","SLOT6_UART_SEL1",
+				"SLOT6_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT7_UART_SEL0","SLOT7_UART_SEL1",
+				"SLOT7_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT8_UART_SEL0","SLOT8_UART_SEL1",
+				"SLOT8_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c8 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+	i2c-mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux17: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux18: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux19: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+	};
+};
+
+&i2c9 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+	i2c-mux@71 {
+		compatible = "nxp,pca9544";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux20: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux21: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux22: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux23: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+	};
+};
+
+&i2c10 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+	i2c-mux@74 {
+		compatible = "nxp,pca9544";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux28: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@20 {
+				compatible = "nxp,pca9506";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@21 {
+				compatible = "nxp,pca9506";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@22 {
+				compatible = "nxp,pca9506";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@23 {
+				compatible = "nxp,pca9506";
+				reg = <0x23>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@24 {
+				compatible = "nxp,pca9506";
+				reg = <0x24>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names = "","","","",
+						  "NIC0_MAIN_PWR_EN",
+						  "NIC1_MAIN_PWR_EN",
+						  "NIC2_MAIN_PWR_EN",
+						  "NIC3_MAIN_PWR_EN",
+						  "","","","","","","","",
+						  "","","","","","","","",
+						  "","","","","","","","";
+			};
+		};
+
+		imux29: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+	power-sensor@10 {
+		compatible = "adi,adm1272";
+		reg = <0x10>;
+	};
+
+	power-sensor@12 {
+		compatible = "adi,adm1272";
+		reg = <0x12>;
+	};
+
+	gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "P48V_OCP_GPIO1", "P48V_OCP_GPIO2",
+				  "P48V_OCP_GPIO3", "FAN_BOARD_0_REVISION_0_R",
+				  "FAN_BOARD_0_REVISION_1_R",
+				  "FAN_BOARD_1_REVISION_0_R",
+				  "FAN_BOARD_1_REVISION_1_R", "RST_MUX_R_N",
+				  "RST_LED_CONTROL_FAN_BOARD_0_N",
+				  "RST_LED_CONTROL_FAN_BOARD_1_N",
+				  "RST_IOEXP_FAN_BOARD_0_N",
+				  "RST_IOEXP_FAN_BOARD_1_N",
+				  "PWRGD_LOAD_SWITCH_FAN_BOARD_0_R",
+				  "PWRGD_LOAD_SWITCH_FAN_BOARD_1_R",
+				  "", "";
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "HSC_OCP_SLOT_ODD_GPIO1",
+				  "HSC_OCP_SLOT_ODD_GPIO2",
+				  "HSC_OCP_SLOT_ODD_GPIO3",
+				  "HSC_OCP_SLOT_EVEN_GPIO1",
+				  "HSC_OCP_SLOT_EVEN_GPIO2",
+				  "HSC_OCP_SLOT_EVEN_GPIO3",
+				  "ADC_TYPE_0_R", "ADC_TYPE_1_R",
+				  "MEDUSA_BOARD_REV_0", "MEDUSA_BOARD_REV_1",
+				  "MEDUSA_BOARD_REV_2", "MEDUSA_BOARD_TYPE",
+				  "DELTA_MODULE_TYPE", "P12V_HSC_TYPE",
+				  "", "";
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "CARD_TYPE_SLOT1", "CARD_TYPE_SLOT2",
+				  "CARD_TYPE_SLOT3", "CARD_TYPE_SLOT4",
+				  "CARD_TYPE_SLOT5", "CARD_TYPE_SLOT6",
+				  "CARD_TYPE_SLOT7", "CARD_TYPE_SLOT8",
+				  "OC_P48V_HSC_0_N", "FLT_P48V_HSC_0_N",
+				  "OC_P48V_HSC_1_N", "FLT_P48V_HSC_1_N",
+				  "EN_P48V_AUX_0", "EN_P48V_AUX_1",
+				  "PWRGD_P12V_AUX_0", "PWRGD_P12V_AUX_1";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "HSC1_ALERT1_R_N", "HSC2_ALERT1_R_N",
+				  "HSC3_ALERT1_R_N", "HSC4_ALERT1_R_N",
+				  "HSC5_ALERT1_R_N", "HSC6_ALERT1_R_N",
+				  "HSC7_ALERT1_R_N", "HSC8_ALERT1_R_N",
+				  "HSC1_ALERT2_R_N", "HSC2_ALERT2_R_N",
+				  "HSC3_ALERT2_R_N", "HSC4_ALERT2_R_N",
+				  "HSC5_ALERT2_R_N", "HSC6_ALERT2_R_N",
+				  "HSC7_ALERT2_R_N", "HSC8_ALERT2_R_N";
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+};
+
+&i2c12 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux34: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+
+			rtc@6f {
+				compatible = "nuvoton,nct3018y";
+				reg = <0x6f>;
+			};
+
+			gpio@20 {
+				compatible = "nxp,pca9506";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@21 {
+				compatible = "nxp,pca9506";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@22 {
+				compatible = "nxp,pca9506";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@23 {
+				compatible = "nxp,pca9506";
+				reg = <0x23>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		imux35: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c13 {
+	status = "okay";
+	bus-frequency = <100000>;
+	multi-master;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c14 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+	adc@1d {
+		compatible = "ti,adc128d818";
+		reg = <0x1d>;
+		ti,mode = /bits/ 8 <1>;
+	};
+
+	adc@36 {
+		compatible = "ti,adc128d818";
+		reg = <0x36>;
+		ti,mode = /bits/ 8 <1>;
+	};
+
+	adc@37 {
+		compatible = "ti,adc128d818";
+		reg = <0x37>;
+		ti,mode = /bits/ 8 <1>;
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina230";
+		reg = <0x40>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina230";
+		reg = <0x41>;
+	};
+
+	power-sensor@42 {
+		compatible = "ti,ina230";
+		reg = <0x42>;
+	};
+
+	power-sensor@43 {
+		compatible = "ti,ina230";
+		reg = <0x43>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina230";
+		reg = <0x44>;
+	};
+
+	temperature-sensor@4e {
+		compatible = "ti,tmp75";
+		reg = <0x4e>;
+	};
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9544";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux32: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			adc@35 {
+				compatible = "maxim,max11617";
+				reg = <0x35>;
+			};
+		};
+
+		imux33: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			adc@35 {
+				compatible = "maxim,max11617";
+				reg = <0x35>;
+			};
+		};
+	};
+
+	i2c-mux@74 {
+		compatible = "nxp,pca9546";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux30: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			pwm@20 {
+				compatible = "maxim,max31790";
+				reg = <0x20>;
+			};
+
+			gpio@22 {
+				compatible = "ti,tca6424";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pwm@2f {
+				compatible = "maxim,max31790";
+				reg = <0x2f>;
+			};
+
+			adc@33 {
+				compatible = "maxim,max11615";
+				reg = <0x33>;
+			};
+
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+
+			gpio@61 {
+				compatible = "nxp,pca9552";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		imux31: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			pwm@20 {
+				compatible = "maxim,max31790";
+				reg = <0x20>;
+			};
+
+			gpio@22 {
+				compatible = "ti,tca6424";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pwm@2f {
+				compatible = "maxim,max31790";
+				reg = <0x2f>;
+			};
+
+			adc@33 {
+				compatible = "maxim,max11615";
+				reg = <0x33>;
+			};
+
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+
+			gpio@61 {
+				compatible = "nxp,pca9552";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	multi-master;
+	bus-frequency = <400000>;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9544";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux24: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mctp-controller;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux25: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mctp-controller;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux26: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mctp-controller;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux27: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mctp-controller;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&adc0 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+			&pinctrl_adc2_default &pinctrl_adc3_default
+			&pinctrl_adc4_default &pinctrl_adc5_default
+			&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+			&pinctrl_adc15_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
new file mode 100644
index 000000000000..2486981f3d6b
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
@@ -0,0 +1,1067 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2025 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Yosemite 5 BMC";
+	compatible = "facebook,yosemite5-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c16 = &i2c5mux0ch0;
+		i2c17 = &i2c5mux0ch1;
+		i2c18 = &i2c5mux0ch2;
+		i2c19 = &i2c5mux0ch3;
+		i2c20 = &i2c5mux1ch0;
+		i2c21 = &i2c5mux1ch1;
+		i2c22 = &i2c5mux1ch2;
+		i2c23 = &i2c5mux1ch3;
+		i2c24 = &i2c6mux0ch0;
+		i2c25 = &i2c6mux0ch1;
+		i2c26 = &i2c6mux0ch2;
+		i2c27 = &i2c6mux0ch3;
+		i2c28 = &i2c8mux0ch0;
+		i2c29 = &i2c8mux0ch1;
+		i2c30 = &i2c8mux0ch2;
+		i2c31 = &i2c8mux0ch3;
+		i2c32 = &i2c30mux0ch0;
+		i2c33 = &i2c30mux0ch1;
+		i2c34 = &i2c30mux0ch2;
+		i2c35 = &i2c30mux0ch3;
+		serial0 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+					  <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+					  <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "power_blue";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	spi_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+		status = "okay";
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&adc0 {
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default>;
+	status = "okay";
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BATTERY_DETECT","","BMC_I2C1_FPGA_ALERT","BMC_READY",
+			"IOEXP_INT_3V3","FM_ID_LED","","",
+	/*C0-C7*/	"","","","",
+			"PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N","","BMC_I2C_SSIF_ALERT",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"FM_BMC_MUX1_SEL","","","",
+			"","","FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","FLASH_WP_STATUS","BMC_JTAG_MUX_SEL","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"PCIE_EP_RST_EN","BMC_FRU_WP","SCM_HPM_STBY_RST_N",
+			"SCM_HPM_STBY_EN","STBY_POWER_PG_3V3","TH500_SHDN_OK","","",
+	/*N0-N7*/	"led-postcode-0","led-postcode-1","led-postcode-2",
+			"led-postcode-3","led-postcode-4","led-postcode-5",
+			"led-postcode-6","led-postcode-7",
+	/*O0-O7*/	"RUN_POWER_PG","PWR_BRAKE","CHASSIS_AC_LOSS","BSM_PRSNT_N",
+			"PSU_SMB_ALERT","FM_TPM_PRSNT_0_N","PSU_FW_UPDATING_N","",
+	/*P0-P7*/	"PWR_BTN_BMC_N","IPEX_CABLE_PRSNT","ID_RST_BTN_BMC_N",
+			"RST_BMC_RSTBTN_OUT_N","BMC_PWR_LED","RUN_POWER_EN","SHDN_FORCE","",
+	/*Q0-Q7*/	"IRQ_PCH_TPM_SPI_LV3_N","USB_OC0_REAR_N","UART_MUX_SEL",
+			"I2C_MUX_RESET","RSVD_NV_PLT_DETECT","SPI_TPM_INT",
+			"CPU_JTAG_MUX_SELECT","THERM_BB_OVERT",
+	/*R0-R7*/	"THERM_BB_WARN","SPI_BMC_FPGA_INT","CPU_BOOT_DONE","PMBUS_GNT",
+			"CHASSIS_PWR_BRK","PCIE_WAKE","PDB_THERM_OVERT","SHDN_REQ",
+	/*S0-S7*/	"","","SYS_BMC_PWRBTN_N","FM_TPM_PRSNT_1_N",
+			"FM_BMC_DEBUG_SW_N","UID_LED_N","SYS_FAULT_LED_N","RUN_POWER_FAULT",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"FM_DBP_BMC_PRDY_N","","","","","","","",
+	/*V0-V7*/	"L2_RST_REQ_OUT","L0L1_RST_REQ_OUT","BMC_ID_BEEP_SEL",
+			"BMC_I2C0_FPGA_ALERT","SMB_BMC_TMP_ALERT","PWR_LED_N",
+			"SYS_RST_OUT","IRQ_TPM_SPI_N",
+	/*W0-W7*/	"","","","","","","IRQ_ESPI_LPC_SERIRQ_ALERT0_N","",
+	/*X0-X7*/	"","FM_DBP_CPU_PREQ_GF_N","","","","","","",
+	/*Y0-Y7*/	"","","FM_FLASH_LATCH_N","BMC_EMMC_RST_N","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","","FM_BOARD_BMC_REV_ID0",
+			"FM_BOARD_BMC_REV_ID1","FM_BOARD_BMC_REV_ID2","",
+	/*18C0-18C7*/	"","","SPI_BMC_BIOS_ROM_IRQ0_N","","","","","",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"FM_BMC_PROT_LS_EN","AC_PWR_BMC_BTN_N","","";
+};
+
+/* MB CPLD I2C */
+&i2c0 {
+	status = "okay";
+};
+
+/* CPU I2C */
+&i2c1 {
+	status = "okay";
+};
+
+/* MCIO 2A I2C */
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* Socket 0 SBRMI */
+	sbrmi@3c {
+		compatible = "amd,sbrmi";
+		reg = <0x3c>;
+	};
+
+	/* Socket 0 SBTSI */
+	sbtsi@4c {
+		compatible = "amd,sbtsi";
+		reg = <0x4c>;
+	};
+};
+
+&i2c4 {
+	multi-master;
+	mctp-controller;
+	status = "okay";
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	/* OCP NIC TEMP */
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	/* OCP NIC FRU EEPROM */
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	/* I2C MUX for MCIO 1A */
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	/* I2C MUX for MCIO 0A */
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux1ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux1ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux1ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux1ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	/* I2C MUX for PWRPIC #13 ~ #16 */
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		/* PWRPIC #13 */
+		i2c6mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* PWRPIC #14 */
+		i2c6mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* PWRPIC #16 */
+		i2c6mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* PWRPIC #15 */
+		i2c6mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+/* SCM CPLD I2C */
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	power-monitor@14 {
+		compatible = "infineon,xdp710";
+		reg = <0x14>;
+	};
+
+	adc@1d {
+		compatible = "ti,adc128d818";
+		reg = <0x1d>;
+		ti,mode = /bits/ 8 <1>;
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina238";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	/* PADDLE BD IOEXP */
+	gpio-expander@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"HSC_OC_GPIO0", "HSC_OC_GPIO1",
+			"HSC_OC_GPIO2", "HSC_OC_GPIO3";
+	};
+
+	power-sensor@42 {
+		compatible = "ti,ina238";
+		reg = <0x42>;
+		shunt-resistor = <1000>;
+	};
+
+	power-monitor@43 {
+		compatible = "lltc,ltc4287";
+		reg = <0x43>;
+		shunt-resistor-micro-ohms = <250>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina238";
+		reg = <0x44>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina238";
+		reg = <0x45>;
+		shunt-resistor = <1000>;
+	};
+
+	power-monitor@47 {
+		compatible = "ti,tps25990";
+		reg = <0x47>;
+		ti,rimon-micro-ohms = <430000000>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	/* PDB FRU */
+	eeprom@56 {
+		compatible = "atmel,24c128";
+		reg = <0x56>;
+	};
+
+	/* Paddle BD FRU */
+	eeprom@57 {
+		compatible = "atmel,24c128";
+		reg = <0x57>;
+	};
+
+	power-monitor@58 {
+		compatible = "renesas,isl28022";
+		reg = <0x58>;
+		shunt-resistor-micro-ohms = <1000>;
+	};
+
+	power-monitor@59 {
+		compatible = "renesas,isl28022";
+		reg = <0x59>;
+		shunt-resistor-micro-ohms = <1000>;
+	};
+
+	power-monitor@5a {
+		compatible = "renesas,isl28022";
+		reg = <0x5a>;
+		shunt-resistor-micro-ohms = <1000>;
+	};
+
+	power-monitor@5b {
+		compatible = "renesas,isl28022";
+		reg = <0x5b>;
+		shunt-resistor-micro-ohms = <1000>;
+	};
+
+	psu@5c {
+		compatible = "renesas,raa228006";
+		reg = <0x5c>;
+	};
+
+	fan-controller@5e{
+		compatible = "maxim,max31790";
+		reg = <0x5e>;
+	};
+
+	/* I2C MUX for PWRPIC #1, #2, #11, #12 */
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		/* PWRPIC #1 */
+		i2c8mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* PWRPIC #2 */
+		i2c8mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* PWRPIC #12 (Connector to CXL BD) */
+		i2c8mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9546";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c30mux0ch0: i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c30mux0ch1: i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c30mux0ch2: i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					adc@1e {
+						compatible = "ti,adc128d818";
+						reg = <0x1e>;
+						ti,mode = /bits/ 8 <1>;
+					};
+
+					adc@1f {
+						compatible = "ti,adc128d818";
+						reg = <0x1f>;
+						ti,mode = /bits/ 8 <1>;
+					};
+
+					/* CXL BD IOEXP */
+					gpio-expander@27 {
+						compatible = "nxp,pca9535";
+						reg = <0x27>;
+						gpio-controller;
+						#gpio-cells = <2>;
+						gpio-line-names =
+						"IRQ_TEMP_0_ALERT_N","IRQ_TEMP_1_ALERT_N",
+						"ALERT_PMBUS_0_N","ALERT_PMBUS_1_N",
+						"ALERT_PMBUS_2_N","IRQ_INA230_12V_ALERT_N",
+						"RST_IOX_CXL_N","DEBUG_UART_SEL_0",
+						"DEBUG_UART_SEL_1","BMC_REMOTEJTAG_EN_N",
+						"JTAG_BMC_3V3_CTL_CLR_N","DDR_CH02_I2C_MUX_SEL",
+						"DDR_CH13_I2C_MUX_SEL","SYS_OK",
+						"CXL_VRHOT_ALERT_R1_N","";
+					};
+
+					temperature-sensor@4a {
+						compatible = "ti,tmp75";
+						reg = <0x4a>;
+					};
+
+					temperature-sensor@4c {
+						compatible = "ti,tmp432";
+						reg = <0x4c>;
+					};
+
+					power-sensor@4d {
+						compatible = "ti,ina230";
+						reg = <0x4d>;
+						shunt-resistor = <2000>;
+					};
+
+					temperature-sensor@4e {
+						compatible = "ti,tmp75";
+						reg = <0x4e>;
+					};
+
+					/* CXL FRU */
+					eeprom@50 {
+						compatible = "atmel,24c64";
+						reg = <0x50>;
+					};
+				};
+
+				i2c30mux0ch3: i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		/* PWRPIC #11 */
+		i2c8mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	/* SCM FRU */
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	/* BSM FRU */
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+/* MCIO 0A I2C */
+&i2c10 {
+	status = "okay";
+
+	/* E1S EB IOEXP0 */
+	gpio-expander@21 {
+		compatible = "nxp,pca9535";
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <172 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"RST_SMB_E1S_0","LED_ACTIVE_E1S_0",
+			"E1S_0_PRSNT_N","RST_PCIE_E1S_0_PERST",
+			"E1S_0_PWRDIS","ALERT_INA_0",
+			"","",
+			"RST_SMB_E1S_1","LED_ACTIVE_E1S_1",
+			"E1S_1_PRSNT_N","RST_PCIE_E1S_1_PERST",
+			"E1S_1_PWRDIS","ALERT_INA_1",
+			"","";
+	};
+
+	/* E1S EB IOEXP1 */
+	gpio-expander@22 {
+		compatible = "nxp,pca9535";
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <174 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"P12V_E1S_EN_0","PWRGD_P12V_E1S_0",
+			"P12V_E1S_FLTB_0","PWRGD_P3V3_E1S_0",
+			"FM_P3V3_E1S_0_FAULT","P12V_E1S_EN_1",
+			"PWRGD_P12V_E1S_1","P12V_E1S_FLTB_1",
+			"PWRGD_P3V3_E1S_1","FM_P3V3_E1S_1_FAULT",
+			"","",
+			"","",
+			"PWRGD_P3V3_AUX","ALERT_TEMP";
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina233";
+		reg = <0x40>;
+		shunt-resistor = <2000>;
+		ti,maximum-expected-current-microamp = <32768000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina233";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+		ti,maximum-expected-current-microamp = <32768000>;
+	};
+
+	adc@48 {
+		compatible = "ti,ads7830";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	/* E1S EB FRU */
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	/* MB IOEXP */
+	gpio-expander@21 {
+		compatible = "nxp,pca9535";
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <170 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"ALERT_CLKMUX_0_LOSS_N","ALERT_CLKMUX_1_LOSS_N",
+			"ALERT_CLKMUX_2_LOSS_N","ALERT_CLKMUX_3_LOSS_N",
+			"FM_CLKMUX_0_SEL","FM_CLKMUX_1_SEL",
+			"FM_CLKMUX_2_SEL","FM_CLKMUX_3_SEL",
+			"RST_USB_HUB_0_N","FM_CLKGEN_GPIO2",
+			"","FM_BMC_RTC_RST",
+			"FM_P3V_BAT_SCALED_EN","",
+			"FM_CLKGEN_GPIO4","RST_USB_HUB_1_N";
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina230";
+		reg = <0x40>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina230";
+		reg = <0x41>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@42 {
+		compatible = "ti,ina230";
+		reg = <0x42>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@43 {
+		compatible = "ti,ina230";
+		reg = <0x43>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina230";
+		reg = <0x44>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	adc@48 {
+		compatible = "ti,ads7830";
+		reg = <0x48>;
+	};
+
+	adc@49 {
+		compatible = "ti,ads7830";
+		reg = <0x49>;
+	};
+
+	adc@4b {
+		compatible = "ti,ads7830";
+		reg = <0x4b>;
+	};
+};
+
+/* MCIO 4A I2C */
+&i2c12 {
+	multi-master;
+	mctp-controller;
+	status = "okay";
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	power-sensor@40 {
+		compatible = "ti,ina230";
+		reg = <0x40>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina230";
+		reg = <0x41>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina230";
+		reg = <0x44>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "national,lm75b";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "national,lm75b";
+		reg = <0x49>;
+	};
+
+	/* CLKGEN FRU */
+	eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+	};
+
+	/* MB FRU */
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	/* CPU FRU */
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+/* PROT reserve */
+&i2c14 {
+	status = "okay";
+};
+
+/* MCIO 3A I2C */
+&i2c15 {
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8>;
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&mac2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi3_default>;
+	use-ncsi;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl_ncsi3_default: ncsi3_default {
+		function = "RMII3";
+		groups = "NCSI3";
+	};
+};
+
+&sgpiom0 {
+	ngpios = <128>;
+	bus-frequency = <2000000>;
+	gpio-line-names =
+	/*"input pin","output pin"*/
+	/*bit0-bit7*/
+	"PWRGD_CPU_PWROK","SGPIO_RSTBTN_OUT",
+	"PWRGD_CPU_PWROK_1","SGPIO_BMC_READY",
+	"PWRGD_CPU_PWROK_2","IBB_BMC_SRST",
+	"host0-ready","FM_I3C_SPD_AH_SEL_R",
+	"PCIe_HP_BOOT","FM_I3C_SPD_IP_SEL_R",
+	"PCIe_HP_DATA","FM_JTAG_BMC_MUX_S0_R",
+	"PCIe_HP_NIC","FM_JTAG_BMC_MUX_S1_R",
+	"","FM_JTAG_BMC_OE_1_R_N",
+	/*bit8-bit15*/
+	"PWRGD_PVDDCR_CPU0_P0","FM_JTAG_BMC_OE_R_N",
+	"PWRGD_PVDDCR_SOC_P0","FM_REMOTEJTAG_EN_R_N",
+	"PWRGD_PVDDCR_CPU1_P0","FM_CPU_FORCE_SELFREFRESH_R",
+	"PWRGD_P3V3_STBY","FM_CPU_NMI_SYNC_FLOOD_R_N",
+	"PWRGD_PVDD33_S5","FM_CPU_TRIGGERTSC_OE_R_N",
+	"PWRGD_PVDD18_S5_P0","FM_PASSWORD_CLEAR_R_N",
+	"PWRGD_PVDDIO_P0","FM_BIOS_USB_RECOVERY_N",
+	"PWRGD_PVDDIO_MEM_S3_P0","FM_USB_MUX_OE_R_N",
+	/*bit16-bit23*/
+	"PWRGD_P1V8_STBY","FM_USB_MUX_SEL_R",
+	"PWRGD_P1V0_STBY","RST_SMB_BOOT_R_N",
+	"PWRGD_P1V2_STBY","RST_SMB_MCIO0A_R_N",
+	"IBB_BMC_SRST","RST_SMB_NIC_R_N",
+	"PWRGD_P12V_E1S_0","FM_PPS_NIC_IN_BUF_OE_R_N",
+	"PWRGD_P12V_E1S_1","FM_PPS_NIC_IN_EN_R",
+	"RST_PCIE_BOOT_PERST_N","FM_PPS_NIC_IN_OE_R_N",
+	"PWRGD_P12V_NIC","FM_PPS_NIC_IN_S0_R",
+	/*bit24-bit31*/
+	"PWRGD_P12V_SCM","FM_PPS_NIC_IN_S1_R",
+	"PWRGD_P12V_DIMM","FM_PPS_NIC_OUT_BUF_OE_R_N",
+	"PWRGD_CPU_DIMM0_AH","FM_PPS_NIC_OUT_CPU_OE_R_N",
+	"PWRGD_CPU_DIMM1_IP","FM_PPS_NIC_OUT_EN_R",
+	"PWRGD_NIC_CPLD","JTAG_CPLD_DBREQ_R_N",
+	"ALERT_INA230_DIMM_0_N","HDT_HDR_RESET_R_N",
+	"ALERT_INA230_DIMM_1_N","FM_SMB_AUTH_MUX_OE_R_N",
+	"ALERT_INA230_E1S_0_N","FM_SCM_LED_R_N",
+	/*bit32-bit39*/
+	"ALERT_INA230_E1S_1_N","",
+	"ALERT_INA230_FAN0_N","",
+	"ALERT_INA230_FAN1_N","",
+	"ALERT_INA230_FAN2_N","",
+	"ALERT_INA230_FAN3_N","",
+	"ALERT_INA230_NIC_N","",
+	"ALERT_INA230_SCM_N","",
+	"ALERT_IRQ_PMBUS_PWR11_N","",
+	/*bit40-bit47*/
+	"ALERT_MCIO2A_LEAK_DETECT_N","",
+	"ALERT_MCIO3A_LEAK_DETECT_N","",
+	"ALERT_MCIO4A_LEAK_DETECT_N","",
+	"ALERT_OC_PADDLE2_N","",
+	"ALERT_OC_PWR2_N","",
+	"ALERT_OC_PWR11_N","",
+	"ALERT_PADDLE2_SMB_N","",
+	"ALERT_PWR14_SB2_LEAK_DETECT_N","",
+	/*bit48-bit55*/
+	"ALERT_PWR14_SB3_LEAK_DETECT_N","",
+	"ALERT_PWR15_SB2_LEAK_DETECT_N","",
+	"ALERT_PWR15_SB3_LEAK_DETECT_N","",
+	"ALERT_SMB_MCIO0A_N","",
+	"ALERT_SMB_MCIO1A_N","",
+	"ALERT_SMB_MCIO2A_N","",
+	"ALERT_SMB_MCIO2B_N","",
+	"ALERT_SMB_MCIO3A_N","",
+	/*bit56-bit63*/
+	"ALERT_SMB_MCIO3B_N","",
+	"ALERT_SMB_MCIO4A_N","",
+	"ALERT_SMB_MCIO4B_N","",
+	"ALERT_THERMALTRIP_MCIO1A_N","",
+	"ALERT_THERMALTRIP_MCIO2A_N","",
+	"ALERT_THERMALTRIP_MCIO3A_N","",
+	"ALERT_THERMALTRIP_MCIO4A_N","",
+	"ALERT_UV_PADDLE2_N","",
+	/*bit64-bit71*/
+	"ALERT_UV_PWR2_N","",
+	"ALERT_UV_PWR11_N","",
+	"ALERT_VR_SMB_N","",
+	"FAULT_FAN_0_N","",
+	"FAULT_FAN_1_N","",
+	"FAULT_FAN_2_N","",
+	"FAULT_FAN_3_N","",
+	"FAULT_P3V3_E1S_0_N","",
+	/*bit72-bit79*/
+	"FAULT_P3V3_E1S_1_N","",
+	"FAULT_P3V3_NIC_N","",
+	"FAULT_P12V_NIC_N","",
+	"FAULT_P12V_SCM_N","",
+	"P0_I3C_APML_ALERT_L","",
+	"ALERT_INLET_TEMP_N","",
+	"FM_CPU_PROCHOT_R_N","",
+	"FM_CPU_THERMTRIP_N","",
+	/*bit80-bit87*/
+	"ALERT_OUTLET_TEMP_N","",
+	"ALERT_RTC_N","",
+	"PVDDCR_CPU0_P0_OCP_N","",
+	"PVDDCR_CPU1_P0_OCP_N","",
+	"PVDDCR_SOC_P0_OCP_N","",
+	"MB_IOEXP_INT","",
+	"E1S_0_BD_IOEXP","",
+	"E1S_1_BD_IOEXP","",
+	/*bit88-bit95*/
+	"PADDLE_BD_IOEXP_INT","",
+	"FM_BOARD_REV_ID0","",
+	"FM_BOARD_REV_ID1","",
+	"FM_BOARD_REV_ID2","",
+	"FM_VR_TYPE_ID0","",
+	"FM_VR_TYPE_ID1","",
+	"PRSNT_BOOT_N_IOEXP","",
+	"PRSNT_DATA_N_IOEXP","",
+	/*bit96-bit103*/
+	"PRSNT_NIC_N_IOEXP","",
+	"PRSNT_BOOT_N_FF","",
+	"PRSNT_MCIO1A_N_FF","",
+	"NIC_PRSNT_N","",
+	"","",
+	"","",
+	"","",
+	"","",
+	/*bit104-bit111*/
+	"","","","","","","","","","","","","","","","",
+	/*bit112-bit119*/
+	"","","","","","","","","","","","","","","","",
+	/*bit120-bit127*/
+	"","","","","","","","","","","","","","","","";
+	status = "okay";
+};
+
+/* BIOS Flash */
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+	status = "okay";
+
+	flash@0 {
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <12000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		status = "okay";
+	};
+};
+
+/* Host Console */
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+/* SOL */
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+/* BMC Console */
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemitev2.dts
new file mode 100644
index 000000000000..5143f85fbd70
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemitev2.dts
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Yosemitev2 BMC";
+	compatible = "facebook,yosemitev2-bmc", "aspeed,ast2500";
+	aliases {
+		serial4 = &uart5;
+	};
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	iio-hwmon {
+		// VOLATAGE SENSOR
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0> , <&adc 1> , <&adc 2> ,  <&adc 3> ,
+		<&adc 4> , <&adc 5> , <&adc 6> ,  <&adc 7> ,
+		<&adc 8> , <&adc 9> , <&adc 10>, <&adc 11> ,
+		<&adc 12> , <&adc 13> , <&adc 14> , <&adc 15> ;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+&uart1 {
+	// Host1 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	// Host2 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+
+};
+
+&uart3 {
+	// Host3 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default>;
+};
+
+&uart4 {
+	// Host4 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+&uart5 {
+	// BMC Console
+	status = "okay";
+};
+
+&vuart {
+	// Virtual UART
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	use-ncsi;
+	mellanox,multi-host;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&i2c1 {
+	//Host1 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb1@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c3 {
+	//Host2 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb3@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	//Host3 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb5@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c7 {
+	//Host4 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb7@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	//FRU EEPROM
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	tmp421@4e {
+	//INLET TEMP
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+	//OUTLET TEMP
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	//HSC
+	adm1278@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+	//MEZZ_TEMP_SENSOR
+	tmp421@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+	// Debug Card
+	multi-master;
+	ipmb13@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	//FSC
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts
new file mode 100644
index 000000000000..63fcb7a7619a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts
@@ -0,0 +1,609 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2025 IBM Corp.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include "aspeed-g6.dtsi"
+#include "ibm-power11-dual.dtsi"
+
+/ {
+	model = "Balcones";
+	compatible = "ibm,balcones-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		i2c16 = &i2c11mux0chn0;
+		i2c17 = &i2c11mux0chn1;
+		i2c18 = &i2c11mux0chn2;
+		i2c19 = &i2c11mux0chn3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			gpios = <&gpio0 ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+			label = "fan0-presence";
+			linux,code = <6>;
+		};
+
+		event-fan1-presence {
+			gpios = <&gpio0 ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
+			label = "fan1-presence";
+			linux,code = <7>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-fan0 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan1 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: region@b3d00000 {
+			reg = <0xb3d00000 0x100000>;
+			no-map;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			reg = <0xb4000000 0x04000000>; /* 64M */
+			no-map;
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+			no-map;
+		};
+	};
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emmc {
+	clk-phase-mmc-hs200 = <180>, <180>;
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+		/*A0-A7*/	"","","","","","","","",
+		/*B0-B7*/	"","","","","","","checkstop","",
+		/*C0-C7*/	"","","","","","","","",
+		/*D0-D7*/	"","","","","","","","",
+		/*E0-E7*/	"","","","","","","","",
+		/*F0-F7*/	"","fan-ctlr-reset","rtc-battery-voltage-read-enable",
+				"reset-cause-pinhole","","","","",
+		/*G0-G7*/	"fan0","fan1","","","","","","",
+		/*H0-H7*/	"","","rear-enc-id0","rear-enc-fault0","","","","",
+		/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+		/*J0-J7*/	"","","","","","","","",
+		/*K0-K7*/	"","","","","","","","",
+		/*L0-L7*/	"","","","","","","","",
+		/*M0-M7*/	"","","","","","","","",
+		/*N0-N7*/	"","","","","","","","",
+		/*O0-O7*/	"","","","usb-power","","","","",
+		/*P0-P7*/	"","","","","","","","",
+		/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+		/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","",
+				"","","",
+		/*S0-S7*/	"presence-ps0","presence-ps1","","","power-ffs-sync-history","","",
+				"",
+		/*T0-T7*/	"","","","","","","","",
+		/*U0-U7*/	"","","","","","","","",
+		/*V0-V7*/	"","","","","","","","",
+		/*W0-W7*/	"","","","","","","","",
+		/*X0-X7*/	"","","","","","","","",
+		/*Y0-Y7*/	"","","","","","","","",
+		/*Z0-Z7*/	"","","","","","","","";
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	gpio@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"",
+			"",
+			"DASD_BP_PRESENT_N";
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	pmic@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@5a {
+		compatible = "acbel,fsg032";
+		reg = <0x5a>;
+	};
+
+	power-supply@5b {
+		compatible = "acbel,fsg032";
+		reg = <0x5b>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+
+	led-controller@62 {
+		compatible = "nxp,pca9551";
+		reg = <0x62>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "cablecard2-cxp-top";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "cablecard2-cxp-bot";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	pwm@53 {
+		compatible = "maxim,max31785a";
+		reg = <0x53>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "front-sys-id0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "front-check-log0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "front-enc-fault1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "front-sys-pwron0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	lcd-controller@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	pressure-sensor@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"",
+			"APSS_RESET_N",
+			"",
+			"N_MODE_CPU_N",
+			"",
+			"",
+			"P10_DCM_PRESENT",
+			"";
+	};
+
+	led-controller@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"",
+			"",
+			"SLOT2_PRSNT_EN_RSVD",
+			"",
+			"",
+			"",
+			"",
+			"SLOT2_EXPANDER_PRSNT_N",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	temperature-sensor@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	gpio@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"BOOT_RCVRY_TWI",
+			"BOOT_RCVRY_UART",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"PE_SWITCH_RSTB_N";
+	};
+
+	temperature-sensor@4c {
+		compatible = "ti,tmp435";
+		reg = <0x4c>;
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9849";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "nvme3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "nvme2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "nvme1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "nvme0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+	status = "okay";
+};
+
+&lpc_ctrl {
+	memory-region = <&flash_memory>;
+	status = "okay";
+};
+
+&mac2 {
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	use-ncsi;
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts
new file mode 100644
index 000000000000..839aad4ddd91
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-bmc-ibm-blueridge.dts"
+
+/ {
+	model = "Blueridge 4U";
+};
+
+&i2c3 {
+	power-supply@6a {
+		compatible = "ibm,cffps";
+		reg = <0x6a>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
new file mode 100644
index 000000000000..bc4c46235421
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
@@ -0,0 +1,1688 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include "aspeed-g6.dtsi"
+#include "ibm-power11-quad.dtsi"
+
+/ {
+	model = "Blueridge 2U";
+	compatible = "ibm,blueridge-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		i2c16 = &i2c2mux0;
+		i2c17 = &i2c2mux1;
+		i2c18 = &i2c2mux2;
+		i2c19 = &i2c2mux3;
+		i2c20 = &i2c4mux0chn0;
+		i2c21 = &i2c4mux0chn1;
+		i2c22 = &i2c4mux0chn2;
+		i2c23 = &i2c5mux0chn0;
+		i2c24 = &i2c5mux0chn1;
+		i2c25 = &i2c6mux0chn0;
+		i2c26 = &i2c6mux0chn1;
+		i2c27 = &i2c6mux0chn2;
+		i2c28 = &i2c6mux0chn3;
+		i2c29 = &i2c11mux0chn0;
+		i2c30 = &i2c11mux0chn1;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: region@b3d00000 {
+			reg = <0xb3d00000 0x100000>;
+			no-map;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			reg = <0xb4000000 0x04000000>; /* 64M */
+			no-map;
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+			no-map;
+		};
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c2>;
+		idle-state = <0>;
+		mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>,
+			    <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+
+		i2c2mux0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2mux1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2mux2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2mux3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC Card fault LED at the back */
+		led-bmc-ingraham0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure ID LED at the back */
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		led-pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			label = "fan0-presence";
+			linux,code = <6>;
+		};
+
+		event-fan1-presence {
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			label = "fan1-presence";
+			linux,code = <7>;
+		};
+
+		event-fan2-presence {
+			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+			label = "fan2-presence";
+			linux,code = <8>;
+		};
+
+		event-fan3-presence {
+			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+			label = "fan3-presence";
+			linux,code = <9>;
+		};
+
+		event-fan4-presence {
+			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
+			label = "fan4-presence";
+			linux,code = <10>;
+		};
+
+		event-fan5-presence {
+			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
+			label = "fan5-presence";
+			linux,code = <11>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"bmc-management-ready","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","",
+			"factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","led-bmc-ingraham0","led-rear-enc-id0","led-rear-enc-fault0","","","",
+			"",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
+	/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","",
+			"",
+	/*S0-S7*/	"presence-ps0","presence-ps1","presence-ps2","presence-ps3",
+			"power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+
+	i2c3-mux-oe-n-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
+		line-name = "I2C3_MUX_OE_N";
+		output-high;
+	};
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	gpio@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"DASD_BP2_PRESENT_N",
+			"DASD_BP1_PRESENT_N",
+			"DASD_BP0_PRESENT_N";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	led-controller@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD",
+			"SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD",
+			"SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N",
+			"SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N",
+			"SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N",
+			"", "", "", "", "", "";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	temperature-sensor@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard0-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard0-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard3-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard3-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			led-controller@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard4-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard4-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp275";
+		reg = <0x4b>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "pcieslot0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "pcieslot1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "pcieslot2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "pcieslot3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "pcieslot4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "cpu1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "cpu-vrm1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "lcd-russel";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm12";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm13";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm15";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm16";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm17";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm18";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm19";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm20";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm21";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm22";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm23";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm24";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm25";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm26";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm27";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm28";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm29";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm30";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm31";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "planar";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "cpu0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "dasd-pyramid0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "dasd-pyramid1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "dasd-pyramid2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "cpu0-vrm0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "rtc-battery";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "base-blyth";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "pcieslot6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "pcieslot7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "pcieslot8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "pcieslot9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "pcieslot10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "pcieslot11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "tpm-wilson";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	humidity-sensor@40 {
+		compatible = "silabs,si7020";
+		reg = <0x40>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	pwm@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "front-sys-id0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "front-check-log0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "front-enc-fault1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "front-sys-pwron0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca0: led-controller@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "fan0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "fan1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "fan2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "fan3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "fan4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "fan5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	lcd-controller@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	pressure-sensor@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pmic@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"", "", "", "", "", "", "P10_DCM0_PRES", "P10_DCM1_PRES",
+			"", "", "", "", "PRESENT_VRM_DCM0_N", "PRESENT_VRM_DCM1_N",
+			"power-config-full-load", "";
+	};
+
+	led-controller@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
+			"SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
+			"SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
+			"SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
+			"SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
+			"SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
+			"", "", "", "";
+	};
+
+};
+
+&i2c9 {
+	status = "okay";
+
+	temperature-sensor@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	temperature-sensor@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	temperature-sensor@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	temperature-sensor@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard10-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard10-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "nvme0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "nvme1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "nvme2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "nvme3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "nvme4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "nvme5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "nvme6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "nvme7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "nvme8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "nvme9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "nvme10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "nvme11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "nvme12";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "nvme13";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "nvme14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "nvme15";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "nvme16";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "nvme17";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "nvme18";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "nvme19";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "nvme20";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "nvme21";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "nvme22";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "nvme23";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
new file mode 100644
index 000000000000..a37399ff3cea
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
@@ -0,0 +1,608 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Bonnell";
+	compatible = "ibm,bonnell-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		i2c16 = &i2c11mux0chn0;
+		i2c17 = &i2c11mux0chn1;
+		i2c18 = &i2c11mux0chn2;
+		i2c19 = &i2c11mux0chn3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: tcg_event_log@b3d00000 {
+			no-map;
+			reg = <0xb3d00000 0x100000>;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fan0 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&gpio0 ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&gpio0 ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+		/*A0-A7*/	"","","","","","","","",
+		/*B0-B7*/	"","","","","","","checkstop","",
+		/*C0-C7*/	"","","","","","","","",
+		/*D0-D7*/	"","","","","","","","",
+		/*E0-E7*/	"","","","","","","","",
+		/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","","",
+		/*G0-G7*/	"fan0","fan1","","","","","","",
+		/*H0-H7*/	"","","rear-enc-id0","rear-enc-fault0","","","","",
+		/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+		/*J0-J7*/	"","","","","","","","",
+		/*K0-K7*/	"","","","","","","","",
+		/*L0-L7*/	"","","","","","","","",
+		/*M0-M7*/	"","","","","","","","",
+		/*N0-N7*/	"","","","","","","","",
+		/*O0-O7*/	"","","","usb-power","","","","",
+		/*P0-P7*/	"","","","","","","","",
+		/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+		/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
+		/*S0-S7*/	"presence-ps0","presence-ps1","","","power-ffs-sync-history","","","",
+		/*T0-T7*/	"","","","","","","","",
+		/*U0-U7*/	"","","","","","","","",
+		/*V0-V7*/	"","","","","","","","",
+		/*W0-W7*/	"","","","","","","","",
+		/*X0-X7*/	"","","","","","","","",
+		/*Y0-Y7*/	"","","","","","","","",
+		/*Z0-Z7*/	"","","","","","","","";
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"",
+			"",
+			"DASD_BP_PRESENT_N";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@5a {
+		compatible = "acbel,fsg032";
+		reg = <0x5a>;
+	};
+
+	power-supply@5b {
+		compatible = "acbel,fsg032";
+		reg = <0x5b>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	si7021-a20@40 {
+		compatible = "silabs,si7020";
+		reg = <0x40>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan0: fan@0 {
+			reg = <0>;
+		};
+
+		fan1: fan@1 {
+			reg = <1>;
+		};
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "front-sys-id0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "front-check-log0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "front-enc-fault1";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "front-sys-pwron0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"APSS_RESET_N",
+			"",
+			"N_MODE_CPU_N",
+			"",
+			"",
+			"P10_DCM_PRESENT",
+			"";
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "BOOT_RCVRY_TWI",
+			"BOOT_RCVRY_UART",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"PE_SWITCH_RSTB_N";
+	};
+
+	tmp435@4c {
+		compatible = "ti,tmp435";
+		reg = <0x4c>;
+	};
+
+	pca9849@75 {
+		compatible = "nxp,pca9849";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c11mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c11mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme3";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme2";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme1";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+#include "ibm-power10-dual.dtsi"
+
+&cfam0_i2c10 {
+	eeprom@50 {
+		compatible = "atmel,at30tse004a";
+		reg = <0x50>;
+	};
+};
+
+&cfam0_i2c11 {
+	eeprom@50 {
+		compatible = "atmel,at30tse004a";
+		reg = <0x50>;
+	};
+};
+
+&cfam0_i2c12 {
+	eeprom@50 {
+		compatible = "atmel,at30tse004a";
+		reg = <0x50>;
+	};
+};
+
+&cfam0_i2c13 {
+	eeprom@50 {
+		compatible = "atmel,at30tse004a";
+		reg = <0x50>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
new file mode 100644
index 000000000000..5a0975d52492
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
@@ -0,0 +1,4038 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2020 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Everest";
+	compatible = "ibm,everest-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c500 = &cfam4_i2c0;
+		i2c501 = &cfam4_i2c1;
+		i2c510 = &cfam4_i2c10;
+		i2c511 = &cfam4_i2c11;
+		i2c512 = &cfam4_i2c12;
+		i2c513 = &cfam4_i2c13;
+		i2c514 = &cfam4_i2c14;
+		i2c515 = &cfam4_i2c15;
+		i2c602 = &cfam5_i2c2;
+		i2c603 = &cfam5_i2c3;
+		i2c610 = &cfam5_i2c10;
+		i2c611 = &cfam5_i2c11;
+		i2c614 = &cfam5_i2c14;
+		i2c615 = &cfam5_i2c15;
+		i2c616 = &cfam5_i2c16;
+		i2c617 = &cfam5_i2c17;
+		i2c700 = &cfam6_i2c0;
+		i2c701 = &cfam6_i2c1;
+		i2c710 = &cfam6_i2c10;
+		i2c711 = &cfam6_i2c11;
+		i2c712 = &cfam6_i2c12;
+		i2c713 = &cfam6_i2c13;
+		i2c714 = &cfam6_i2c14;
+		i2c715 = &cfam6_i2c15;
+		i2c802 = &cfam7_i2c2;
+		i2c803 = &cfam7_i2c3;
+		i2c810 = &cfam7_i2c10;
+		i2c811 = &cfam7_i2c11;
+		i2c814 = &cfam7_i2c14;
+		i2c815 = &cfam7_i2c15;
+		i2c816 = &cfam7_i2c16;
+		i2c817 = &cfam7_i2c17;
+
+		i2c16 = &i2c4mux0chn0;
+		i2c17 = &i2c4mux0chn1;
+		i2c18 = &i2c4mux0chn2;
+		i2c19 = &i2c5mux0chn0;
+		i2c20 = &i2c5mux0chn1;
+		i2c21 = &i2c5mux0chn2;
+		i2c22 = &i2c5mux0chn3;
+		i2c23 = &i2c6mux0chn0;
+		i2c24 = &i2c6mux0chn1;
+		i2c25 = &i2c6mux0chn2;
+		i2c26 = &i2c6mux0chn3;
+		i2c27 = &i2c14mux0chn0;
+		i2c28 = &i2c14mux0chn1;
+		i2c29 = &i2c14mux0chn2;
+		i2c30 = &i2c14mux0chn3;
+		i2c31 = &i2c14mux1chn0;
+		i2c32 = &i2c14mux1chn1;
+		i2c33 = &i2c14mux1chn2;
+		i2c34 = &i2c14mux1chn3;
+		i2c35 = &i2c15mux0chn0;
+		i2c36 = &i2c15mux0chn1;
+		i2c37 = &i2c15mux0chn2;
+		i2c38 = &i2c15mux0chn3;
+		i2c39 = &i2c15mux1chn0;
+		i2c40 = &i2c15mux1chn1;
+		i2c41 = &i2c15mux1chn2;
+		i2c42 = &i2c15mux1chn3;
+		i2c43 = &i2c15mux2chn0;
+		i2c44 = &i2c15mux2chn1;
+		i2c45 = &i2c15mux2chn2;
+		i2c46 = &i2c15mux2chn3;
+		i2c47 = &i2c8mux0chn0;
+		i2c48 = &i2c8mux0chn1;
+
+		serial4 = &uart5;
+
+		sbefifo500 = &sbefifo500;
+		sbefifo501 = &sbefifo501;
+		sbefifo510 = &sbefifo510;
+		sbefifo511 = &sbefifo511;
+		sbefifo512 = &sbefifo512;
+		sbefifo513 = &sbefifo513;
+		sbefifo514 = &sbefifo514;
+		sbefifo515 = &sbefifo515;
+		sbefifo602 = &sbefifo602;
+		sbefifo603 = &sbefifo603;
+		sbefifo610 = &sbefifo610;
+		sbefifo611 = &sbefifo611;
+		sbefifo614 = &sbefifo614;
+		sbefifo615 = &sbefifo615;
+		sbefifo616 = &sbefifo616;
+		sbefifo617 = &sbefifo617;
+		sbefifo700 = &sbefifo700;
+		sbefifo701 = &sbefifo701;
+		sbefifo710 = &sbefifo710;
+		sbefifo711 = &sbefifo711;
+		sbefifo712 = &sbefifo712;
+		sbefifo713 = &sbefifo713;
+		sbefifo714 = &sbefifo714;
+		sbefifo715 = &sbefifo715;
+		sbefifo802 = &sbefifo802;
+		sbefifo803 = &sbefifo803;
+		sbefifo810 = &sbefifo810;
+		sbefifo811 = &sbefifo811;
+		sbefifo814 = &sbefifo814;
+		sbefifo815 = &sbefifo815;
+		sbefifo816 = &sbefifo816;
+		sbefifo817 = &sbefifo817;
+
+		scom500 = &scom500;
+		scom501 = &scom501;
+		scom510 = &scom510;
+		scom511 = &scom511;
+		scom512 = &scom512;
+		scom513 = &scom513;
+		scom514 = &scom514;
+		scom515 = &scom515;
+		scom602 = &scom602;
+		scom603 = &scom603;
+		scom610 = &scom610;
+		scom611 = &scom611;
+		scom614 = &scom614;
+		scom615 = &scom615;
+		scom616 = &scom616;
+		scom617 = &scom617;
+		scom700 = &scom700;
+		scom701 = &scom701;
+		scom710 = &scom710;
+		scom711 = &scom711;
+		scom712 = &scom712;
+		scom713 = &scom713;
+		scom714 = &scom714;
+		scom715 = &scom715;
+		scom802 = &scom802;
+		scom803 = &scom803;
+		scom810 = &scom810;
+		scom811 = &scom811;
+		scom814 = &scom814;
+		scom815 = &scom815;
+		scom816 = &scom816;
+		scom817 = &scom817;
+
+		spi50 = &cfam4_spi0;
+		spi51 = &cfam4_spi1;
+		spi52 = &cfam4_spi2;
+		spi53 = &cfam4_spi3;
+		spi60 = &cfam5_spi0;
+		spi61 = &cfam5_spi1;
+		spi62 = &cfam5_spi2;
+		spi63 = &cfam5_spi3;
+		spi70 = &cfam6_spi0;
+		spi71 = &cfam6_spi1;
+		spi72 = &cfam6_spi2;
+		spi73 = &cfam6_spi3;
+		spi80 = &cfam7_spi0;
+		spi81 = &cfam7_spi1;
+		spi82 = &cfam7_spi2;
+		spi83 = &cfam7_spi3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: tcg_event_log@b3d00000 {
+			no-map;
+			reg = <0xb3d00000 0x100000>;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>; /* 16M */
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
+			linux,code = <15>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
+			linux,code = <14>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* RTC battery fault LED at the back */
+		led-rtc-battery {
+			gpios = <&gpio0 ASPEED_GPIO(H, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		/* BMC Card fault LED at the back */
+		led-bmc {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure Identify LED at the back */
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		led-pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+				 &pinctrl_adc10_default &pinctrl_adc11_default
+				 &pinctrl_adc12_default &pinctrl_adc13_default
+				 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"USERSPACE_RSTIND_BUFF","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","","","",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
+	/*Q0-Q7*/	"","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","I2C_FLASH_MICRO_N","","",
+	/*S0-S7*/	"","","","","power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","BMC_3RESTART_ATTEMPT_P","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/   "","","","","","","","";
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	pca1: pca9552@62 {
+		compatible = "nxp,pca9552";
+		reg = <0x62>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-ps0",
+			"presence-ps1",
+			"presence-ps2",
+			"presence-ps3",
+			"presence-pdb",
+			"presence-tpm",
+			"", "",
+			"presence-cp0",
+			"presence-cp1",
+			"presence-cp2",
+			"presence-cp3",
+			"presence-dasd",
+			"presence-lcd-op",
+			"presence-base-op",
+			"";
+	};
+
+	led-controller@63 {
+		compatible = "nxp,pca9552";
+		reg = <0x63>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-vrm-c12",
+			"presence-vrm-c13",
+			"presence-vrm-c15",
+			"presence-vrm-c16",
+			"presence-vrm-c17",
+			"presence-vrm-c18",
+			"presence-vrm-c20",
+			"presence-vrm-c21",
+			"presence-vrm-c54",
+			"presence-vrm-c55",
+			"presence-vrm-c57",
+			"presence-vrm-c58",
+			"presence-vrm-c59",
+			"presence-vrm-c60",
+			"presence-vrm-c62",
+			"presence-vrm-c63";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+
+	power-supply@6d {
+		compatible = "ibm,cffps";
+		reg = <0x6d>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	pca2: pca9552@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card1",
+			"presence-cable-card2",
+			"presence-cable-card3",
+			"presence-cable-card4",
+			"presence-cable-card5",
+			"expander-cable-card1",
+			"expander-cable-card2",
+			"expander-cable-card3",
+			"expander-cable-card4",
+			"expander-cable-card5";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			pca_cable_card_c01: pca9551@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c01-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c01-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca_cable_card_c02: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c02-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c02-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca_cable_card_c03: pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c03-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c03-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	pca3: pca9552@66 {
+		compatible = "nxp,pca9552";
+		reg = <0x66>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card6",
+			"presence-cable-card7",
+			"presence-cable-card8",
+			"presence-cable-card9",
+			"presence-cable-card10",
+			"presence-cable-card11",
+			"expander-cable-card6",
+			"expander-cable-card7",
+			"expander-cable-card8",
+			"expander-cable-card9",
+			"expander-cable-card10",
+			"expander-cable-card11";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca_cable_card_c04: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c04-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c04-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca_cable_card_c05: pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c05-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c05-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			pca_cable_card_c06: pca9551@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c06-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c06-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			pca_cable_card_c07: pca9551@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c07-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c07-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+			compatible = "atmel,24c64";
+			reg = <0x50>;
+			};
+
+			pca_cable_card_c08: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c08-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c08-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			pca_cable_card_c09: pca9551@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c09-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c09-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			pca_cable_card_c10: pca9551@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c10-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c10-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca_cable_card_c11: pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c11-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c11-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+
+	pca_pcie_slot: pca9552@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@1 {
+			label = "pcieslot-c01";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "pcieslot-c02";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "pcieslot-c03";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcieslot-c04";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "pcieslot-c05";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "pcieslot-c06";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "pcieslot-c07";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "pcieslot-c08";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcieslot-c09";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcieslot-c10";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "pcieslot-c11";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	pic0_dimm: pca9552@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm6";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm7";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm8";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm9";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm10";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm11";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm12";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm13";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm14";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm15";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic1_dimm: pca9552@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm16";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm17";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm18";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm19";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm20";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm21";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm22";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm23";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm24";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm25";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm26";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm27";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm28";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm29";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm30";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm31";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic2_dimm: pca9552@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm32";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm33";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm34";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm35";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm36";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm37";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm38";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm39";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm40";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm41";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm42";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm43";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm44";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm45";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm46";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm47";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic3_dimm: pca9552@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm48";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm49";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm50";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm51";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm52";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm53";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm54";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm55";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm56";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm57";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm58";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm59";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm60";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm61";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm62";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm63";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic0_vrm_misc: pca9552@34 {
+		compatible = "ibm,pca9552";
+		reg = <0x34>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "planar";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "tpm";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "cpu3-c61";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "cpu0-c14";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "opencapi-connector3";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "opencapi-connector4";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "opencapi-connector5";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "vrm4";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "vrm5";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "vrm6";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "vrm7";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "vrm12";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "vrm13";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "vrm14";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "vrm15";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic1_vrm_misc: pca9552@35 {
+		compatible = "ibm,pca9552";
+		reg = <0x35>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "dasd-backplane";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "power-distribution";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "cpu1-c19";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "cpu2-c56";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "opencapi-connector0";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "opencapi-connector1";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "opencapi-connector2";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "vrm0";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "vrm1";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "vrm2";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "vrm3";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "vrm8";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "vrm9";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "vrm10";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "vrm11";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	ucd90320@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c8mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c8mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c14 {
+	multi-master;
+	status = "okay";
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		idle-state = <1>;
+
+		i2c14mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@51 {
+				compatible = "atmel,24c32";
+				reg = <0x51>;
+			};
+		};
+
+		i2c14mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+
+			pca_oppanel: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "front-sys-id0";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "front-check-log0";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					label = "front-enc-fault1";
+					reg = <2>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					label = "front-sys-pwron0";
+					reg = <3>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c14mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			max31785@52 {
+				compatible = "maxim,max31785a";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x52>;
+
+				fan@0 {
+					reg = <0>;
+				};
+
+				fan@1 {
+					reg = <1>;
+				};
+
+				fan@2 {
+					reg = <2>;
+				};
+
+				fan@3 {
+					reg = <3>;
+				};
+			};
+
+			pca_fan_nvme: pca9552@60 {
+				compatible = "nxp,pca9552";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "nvme0";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "nvme1";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					label = "nvme2";
+					reg = <2>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					label = "nvme3";
+					reg = <3>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@4 {
+					label = "nvme4";
+					reg = <4>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@5 {
+					label = "nvme5";
+					reg = <5>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@6 {
+					label = "nvme6";
+					reg = <6>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@7 {
+					label = "nvme7";
+					reg = <7>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@8 {
+					label = "nvme8";
+					reg = <8>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@9 {
+					label = "nvme9";
+					reg = <9>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@10 {
+					label = "fan0";
+					reg = <10>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@11 {
+					label = "fan1";
+					reg = <11>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@12 {
+					label = "fan2";
+					reg = <12>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@13 {
+					label = "fan3";
+					reg = <13>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+
+			pca0: pca9552@61 {
+				compatible = "nxp,pca9552";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x61>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				gpio-line-names =
+					"","","","",
+					"","","","",
+					"","","","",
+					"presence-fan3",
+					"presence-fan2",
+					"presence-fan1",
+					"presence-fan0";
+			};
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c14mux1chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux1chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux2chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c15mux2chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <210>, <228>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+#include "ibm-power10-quad.dtsi"
+
+&fsi_hub0 {
+	cfam@4,0 { /* DCM2_C0 */
+		reg = <4 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <4>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_i2c0: i2c-bus@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;	/* OM01 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom500: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo500: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c1: i2c-bus@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;	/* OM23 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom501: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo501: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom510: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo510: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom511: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo511: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c12: i2c-bus@c {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <12>;	/* OP4A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom512: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo512: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c13: i2c-bus@d {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <13>;	/* OP4B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom513: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo513: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom514: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo514: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom515: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo515: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam4_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam4_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam4_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ4: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub4: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@5,0 { /* DCM2_C1 */
+		reg = <5 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <5>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_i2c2: i2c-bus@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;	/* OM45 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom602: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo602: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c3: i2c-bus@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;	/* OM67 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom603: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo603: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom610: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo610: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom611: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo611: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom614: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo614: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom615: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo615: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c16: i2c-bus@10 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <16>;	/* OP6A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom616: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo616: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c17: i2c-bus@11 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <17>;	/* OP6B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom617: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo617: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam5_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam5_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam5_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ5: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub5: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@6,0 { /* DCM3_C0 */
+		reg = <6 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <6>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_i2c0: i2c-bus@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;	/* OM01 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom700: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo700: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c1: i2c-bus@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;	/* OM23 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom701: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo701: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom710: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo710: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom711: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo711: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c12: i2c-bus@c {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <12>;	/* OP4A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom712: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo712: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c13: i2c-bus@d {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <13>;	/* OP4B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom713: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo713: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom714: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo714: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom715: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo715: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam6_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam6_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam6_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ6: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub6: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@7,0 { /* DCM3_C1 */
+		reg = <7 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <7>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_i2c2: i2c-bus@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;	/* OM45 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom802: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo802: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c3: i2c-bus@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;	/* OM67 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom803: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo803: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom810: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo810: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom811: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo811: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom814: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo814: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom815: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo815: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c16: i2c-bus@10 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <16>;	/* OP6A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom816: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo816: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c17: i2c-bus@11 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <17>;	/* OP6B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom817: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo817: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam7_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam7_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam7_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ7: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub7: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ4 {
+	reg = <5>;
+};
+
+&fsi_occ5 {
+	reg = <6>;
+};
+
+&fsi_occ6 {
+	reg = <7>;
+};
+
+&fsi_occ7 {
+	reg = <8>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
new file mode 100644
index 000000000000..9a43fc7bcebe
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
@@ -0,0 +1,3903 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include "aspeed-g6.dtsi"
+#include "ibm-power11-quad.dtsi"
+
+/ {
+	model = "Fuji";
+	compatible = "ibm,fuji-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c500 = &cfam4_i2c0;
+		i2c501 = &cfam4_i2c1;
+		i2c510 = &cfam4_i2c10;
+		i2c511 = &cfam4_i2c11;
+		i2c512 = &cfam4_i2c12;
+		i2c513 = &cfam4_i2c13;
+		i2c514 = &cfam4_i2c14;
+		i2c515 = &cfam4_i2c15;
+		i2c602 = &cfam5_i2c2;
+		i2c603 = &cfam5_i2c3;
+		i2c610 = &cfam5_i2c10;
+		i2c611 = &cfam5_i2c11;
+		i2c614 = &cfam5_i2c14;
+		i2c615 = &cfam5_i2c15;
+		i2c616 = &cfam5_i2c16;
+		i2c617 = &cfam5_i2c17;
+		i2c700 = &cfam6_i2c0;
+		i2c701 = &cfam6_i2c1;
+		i2c710 = &cfam6_i2c10;
+		i2c711 = &cfam6_i2c11;
+		i2c712 = &cfam6_i2c12;
+		i2c713 = &cfam6_i2c13;
+		i2c714 = &cfam6_i2c14;
+		i2c715 = &cfam6_i2c15;
+		i2c802 = &cfam7_i2c2;
+		i2c803 = &cfam7_i2c3;
+		i2c810 = &cfam7_i2c10;
+		i2c811 = &cfam7_i2c11;
+		i2c814 = &cfam7_i2c14;
+		i2c815 = &cfam7_i2c15;
+		i2c816 = &cfam7_i2c16;
+		i2c817 = &cfam7_i2c17;
+
+		i2c16 = &i2c4mux0chn0;
+		i2c17 = &i2c4mux0chn1;
+		i2c18 = &i2c4mux0chn2;
+		i2c19 = &i2c5mux0chn0;
+		i2c20 = &i2c5mux0chn1;
+		i2c21 = &i2c5mux0chn2;
+		i2c22 = &i2c5mux0chn3;
+		i2c23 = &i2c6mux0chn0;
+		i2c24 = &i2c6mux0chn1;
+		i2c25 = &i2c6mux0chn2;
+		i2c26 = &i2c6mux0chn3;
+		i2c27 = &i2c14mux0chn0;
+		i2c28 = &i2c14mux0chn1;
+		i2c29 = &i2c14mux0chn2;
+		i2c30 = &i2c14mux0chn3;
+		i2c31 = &i2c14mux1chn0;
+		i2c32 = &i2c14mux1chn1;
+		i2c33 = &i2c14mux1chn2;
+		i2c34 = &i2c14mux1chn3;
+		i2c35 = &i2c15mux0chn0;
+		i2c36 = &i2c15mux0chn1;
+		i2c37 = &i2c15mux0chn2;
+		i2c38 = &i2c15mux0chn3;
+		i2c39 = &i2c15mux1chn0;
+		i2c40 = &i2c15mux1chn1;
+		i2c41 = &i2c15mux1chn2;
+		i2c42 = &i2c15mux1chn3;
+		i2c43 = &i2c15mux2chn0;
+		i2c44 = &i2c15mux2chn1;
+		i2c45 = &i2c15mux2chn2;
+		i2c46 = &i2c15mux2chn3;
+		i2c47 = &i2c8mux0chn0;
+		i2c48 = &i2c8mux0chn1;
+
+		serial4 = &uart5;
+
+		sbefifo500 = &sbefifo500;
+		sbefifo501 = &sbefifo501;
+		sbefifo510 = &sbefifo510;
+		sbefifo511 = &sbefifo511;
+		sbefifo512 = &sbefifo512;
+		sbefifo513 = &sbefifo513;
+		sbefifo514 = &sbefifo514;
+		sbefifo515 = &sbefifo515;
+		sbefifo602 = &sbefifo602;
+		sbefifo603 = &sbefifo603;
+		sbefifo610 = &sbefifo610;
+		sbefifo611 = &sbefifo611;
+		sbefifo614 = &sbefifo614;
+		sbefifo615 = &sbefifo615;
+		sbefifo616 = &sbefifo616;
+		sbefifo617 = &sbefifo617;
+		sbefifo700 = &sbefifo700;
+		sbefifo701 = &sbefifo701;
+		sbefifo710 = &sbefifo710;
+		sbefifo711 = &sbefifo711;
+		sbefifo712 = &sbefifo712;
+		sbefifo713 = &sbefifo713;
+		sbefifo714 = &sbefifo714;
+		sbefifo715 = &sbefifo715;
+		sbefifo802 = &sbefifo802;
+		sbefifo803 = &sbefifo803;
+		sbefifo810 = &sbefifo810;
+		sbefifo811 = &sbefifo811;
+		sbefifo814 = &sbefifo814;
+		sbefifo815 = &sbefifo815;
+		sbefifo816 = &sbefifo816;
+		sbefifo817 = &sbefifo817;
+
+		scom500 = &scom500;
+		scom501 = &scom501;
+		scom510 = &scom510;
+		scom511 = &scom511;
+		scom512 = &scom512;
+		scom513 = &scom513;
+		scom514 = &scom514;
+		scom515 = &scom515;
+		scom602 = &scom602;
+		scom603 = &scom603;
+		scom610 = &scom610;
+		scom611 = &scom611;
+		scom614 = &scom614;
+		scom615 = &scom615;
+		scom616 = &scom616;
+		scom617 = &scom617;
+		scom700 = &scom700;
+		scom701 = &scom701;
+		scom710 = &scom710;
+		scom711 = &scom711;
+		scom712 = &scom712;
+		scom713 = &scom713;
+		scom714 = &scom714;
+		scom715 = &scom715;
+		scom802 = &scom802;
+		scom803 = &scom803;
+		scom810 = &scom810;
+		scom811 = &scom811;
+		scom814 = &scom814;
+		scom815 = &scom815;
+		scom816 = &scom816;
+		scom817 = &scom817;
+
+		spi50 = &cfam4_spi0;
+		spi51 = &cfam4_spi1;
+		spi52 = &cfam4_spi2;
+		spi53 = &cfam4_spi3;
+		spi60 = &cfam5_spi0;
+		spi61 = &cfam5_spi1;
+		spi62 = &cfam5_spi2;
+		spi63 = &cfam5_spi3;
+		spi70 = &cfam6_spi0;
+		spi71 = &cfam6_spi1;
+		spi72 = &cfam6_spi2;
+		spi73 = &cfam6_spi3;
+		spi80 = &cfam7_spi0;
+		spi81 = &cfam7_spi1;
+		spi82 = &cfam7_spi2;
+		spi83 = &cfam7_spi3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: region@b3d00000 {
+			reg = <0xb3d00000 0x100000>;
+			no-map;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			reg = <0xb4000000 0x04000000>; /* 64M */
+			no-map;
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>; /* 16M */
+			no-map;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
+			label = "fan0-presence";
+			linux,code = <15>;
+		};
+
+		event-fan1-presence {
+			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
+			label = "fan1-presence";
+			linux,code = <14>;
+		};
+
+		event-fan2-presence {
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+			label = "fan2-presence";
+			linux,code = <13>;
+		};
+
+		event-fan3-presence {
+			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
+			label = "fan3-presence";
+			linux,code = <12>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* RTC battery fault LED at the back */
+		led-rtc-battery {
+			gpios = <&gpio0 ASPEED_GPIO(H, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		/* BMC Card fault LED at the back */
+		led-bmc {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure Identify LED at the back */
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		led-pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+				 &pinctrl_adc10_default &pinctrl_adc11_default
+				 &pinctrl_adc12_default &pinctrl_adc13_default
+				 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"bmc-management-ready","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","",
+			"factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","",
+			"","",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
+	/*Q0-Q7*/	"","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","",
+			"I2C_FLASH_MICRO_N","","",
+	/*S0-S7*/	"","","","","power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","BMC_3RESTART_ATTEMPT_P","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	led-controller@62 {
+		compatible = "nxp,pca9552";
+		reg = <0x62>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-ps0",
+			"presence-ps1",
+			"presence-ps2",
+			"presence-ps3",
+			"presence-pdb",
+			"presence-tpm",
+			"", "",
+			"presence-cp0",
+			"presence-cp1",
+			"presence-cp2",
+			"presence-cp3",
+			"presence-dasd",
+			"presence-lcd-op",
+			"presence-base-op",
+			"";
+	};
+
+	led-controller@63 {
+		compatible = "nxp,pca9552";
+		reg = <0x63>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-vrm-c12",
+			"presence-vrm-c13",
+			"presence-vrm-c15",
+			"presence-vrm-c16",
+			"presence-vrm-c17",
+			"presence-vrm-c18",
+			"presence-vrm-c20",
+			"presence-vrm-c21",
+			"presence-vrm-c54",
+			"presence-vrm-c55",
+			"presence-vrm-c57",
+			"presence-vrm-c58",
+			"presence-vrm-c59",
+			"presence-vrm-c60",
+			"presence-vrm-c62",
+			"presence-vrm-c63";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+
+	power-supply@6d {
+		compatible = "ibm,cffps";
+		reg = <0x6d>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	led-controller@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card1",
+			"presence-cable-card2",
+			"presence-cable-card3",
+			"presence-cable-card4",
+			"presence-cable-card5",
+			"expander-cable-card1",
+			"expander-cable-card2",
+			"expander-cable-card3",
+			"expander-cable-card4",
+			"expander-cable-card5";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			led-controller@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c01-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c01-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c02-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c02-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			led-controller@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c03-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c03-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	led-controller@66 {
+		compatible = "nxp,pca9552";
+		reg = <0x66>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card6",
+			"presence-cable-card7",
+			"presence-cable-card8",
+			"presence-cable-card9",
+			"presence-cable-card10",
+			"presence-cable-card11",
+			"expander-cable-card6",
+			"expander-cable-card7",
+			"expander-cable-card8",
+			"expander-cable-card9",
+			"expander-cable-card10",
+			"expander-cable-card11";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c04-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c04-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			led-controller@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c05-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c05-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			led-controller@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c06-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c06-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			led-controller@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c07-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c07-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c08-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c08-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			led-controller@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c09-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c09-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			led-controller@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c10-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c10-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			led-controller@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c11-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c11-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+
+	led-controller@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "pcieslot-c01";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "pcieslot-c02";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "pcieslot-c03";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "pcieslot-c04";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "pcieslot-c05";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "pcieslot-c06";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "pcieslot-c07";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "pcieslot-c08";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "pcieslot-c09";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "pcieslot-c10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "pcieslot-c11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	led-controller@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm12";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm13";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm15";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm16";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm17";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm18";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm19";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm20";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm21";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm22";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm23";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm24";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm25";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm26";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm27";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm28";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm29";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm30";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm31";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm32";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm33";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm34";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm35";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm36";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm37";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm38";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm39";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm40";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm41";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm42";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm43";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm44";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm45";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm46";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm47";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm48";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm49";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm50";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm51";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm52";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm53";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm54";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm55";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm56";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm57";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm58";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm59";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm60";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm61";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm62";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm63";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@34 {
+		compatible = "ibm,pca9552";
+		reg = <0x34>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "planar";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "tpm";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "cpu3-c61";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "cpu0-c14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "opencapi-connector3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "opencapi-connector4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "opencapi-connector5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "vrm4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "vrm5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "vrm6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "vrm7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "vrm12";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "vrm13";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "vrm14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "vrm15";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@35 {
+		compatible = "ibm,pca9552";
+		reg = <0x35>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "dasd-backplane";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "power-distribution";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "cpu1-c19";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "cpu2-c56";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "opencapi-connector0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "opencapi-connector1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "opencapi-connector2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "vrm0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "vrm1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "vrm2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "vrm3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "vrm8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "vrm9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "vrm10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "vrm11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pmic@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+		reset-gpio = <&gpio0 ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
+
+		i2c8mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c8mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c14 {
+	multi-master;
+	status = "okay";
+
+	lcd-controller@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		idle-state = <1>;
+
+		i2c14mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c32";
+				reg = <0x51>;
+			};
+		};
+
+		i2c14mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "front-sys-id0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "front-check-log0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					reg = <2>;
+					default-state = "keep";
+					label = "front-enc-fault1";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					reg = <3>;
+					default-state = "keep";
+					label = "front-sys-pwron0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c14mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pwm@52 {
+				compatible = "maxim,max31785a";
+				reg = <0x52>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9552";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "nvme0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "nvme1";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					reg = <2>;
+					default-state = "keep";
+					label = "nvme2";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					reg = <3>;
+					default-state = "keep";
+					label = "nvme3";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@4 {
+					reg = <4>;
+					default-state = "keep";
+					label = "nvme4";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@5 {
+					reg = <5>;
+					default-state = "keep";
+					label = "nvme5";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@6 {
+					reg = <6>;
+					default-state = "keep";
+					label = "nvme6";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@7 {
+					reg = <7>;
+					default-state = "keep";
+					label = "nvme7";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@8 {
+					reg = <8>;
+					default-state = "keep";
+					label = "nvme8";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@9 {
+					reg = <9>;
+					default-state = "keep";
+					label = "nvme9";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@a {
+					reg = <10>;
+					default-state = "keep";
+					label = "fan0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@b {
+					reg = <11>;
+					default-state = "keep";
+					label = "fan1";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@c {
+					reg = <12>;
+					default-state = "keep";
+					label = "fan2";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@d {
+					reg = <13>;
+					default-state = "keep";
+					label = "fan3";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+
+			pca0: led-controller@61 {
+				compatible = "nxp,pca9552";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x61>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				gpio-line-names =
+					"","","","",
+					"","","","",
+					"","","","",
+					"presence-fan3",
+					"presence-fan2",
+					"presence-fan1",
+					"presence-fan0";
+			};
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c14mux1chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux1chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux2chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c15mux2chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <210>, <228>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&fsi_hub0 {
+	cfam@4,0 { /* DCM2_C0 */
+		reg = <4 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <4>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom500: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo500: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom501: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo501: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom510: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo510: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom511: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo511: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom512: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo512: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom513: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo513: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom514: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo514: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom515: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo515: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam4_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam4_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam4_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+
+	cfam@5,0 { /* DCM2_C1 */
+		reg = <5 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <5>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom602: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo602: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom603: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo603: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom610: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo610: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom611: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo611: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom614: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo614: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom615: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo615: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom616: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo616: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom617: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo617: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam5_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam5_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam5_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+
+	cfam@6,0 { /* DCM3_C0 */
+		reg = <6 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <6>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom700: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo700: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom701: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo701: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom710: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo710: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom711: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo711: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom712: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo712: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom713: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo713: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom714: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo714: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom715: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo715: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam6_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam6_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam6_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+
+	cfam@7,0 { /* DCM3_C1 */
+		reg = <7 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <7>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom802: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo802: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom803: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo803: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom810: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo810: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom811: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo811: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom814: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo814: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom815: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo815: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom816: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo816: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom817: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo817: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam7_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam7_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam7_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dts
new file mode 100644
index 000000000000..f5f5b18c113a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2021 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-bmc-ibm-rainier-4u.dts"
+
+/ {
+	model = "Rainier 1S4U";
+};
+
+&max {
+	/delete-node/ fan3;
+	/delete-node/ fan5;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dts
new file mode 100644
index 000000000000..342546a3c0f5
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2020 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-bmc-ibm-rainier.dts"
+
+/ {
+	model = "Rainier 4U";
+};
+
+&i2c3 {
+	power-supply@6a {
+		compatible = "ibm,cffps";
+		reg = <0x6a>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
new file mode 100644
index 000000000000..e90421bf7e3a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
@@ -0,0 +1,1725 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Rainier 2U";
+	compatible = "ibm,rainier-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		i2c16 = &i2c2mux0;
+		i2c17 = &i2c2mux1;
+		i2c18 = &i2c2mux2;
+		i2c19 = &i2c2mux3;
+		i2c20 = &i2c4mux0chn0;
+		i2c21 = &i2c4mux0chn1;
+		i2c22 = &i2c4mux0chn2;
+		i2c23 = &i2c5mux0chn0;
+		i2c24 = &i2c5mux0chn1;
+		i2c25 = &i2c6mux0chn0;
+		i2c26 = &i2c6mux0chn1;
+		i2c27 = &i2c6mux0chn2;
+		i2c28 = &i2c6mux0chn3;
+		i2c29 = &i2c11mux0chn0;
+		i2c30 = &i2c11mux0chn1;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	i2c2mux: i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		i2c-parent = <&i2c2>;
+		mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>,
+			    <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+		idle-state = <0>;
+
+		i2c2mux0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c2mux1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c2mux2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c2mux3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC Card fault LED at the back */
+		led-bmc-ingraham0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure ID LED at the back */
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		led-pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+
+		event-fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		event-fan5-presence {
+			label = "fan5-presence";
+			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
+			linux,code = <11>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","led-bmc-ingraham0","led-rear-enc-id0","led-rear-enc-fault0","","","","",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
+	/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
+	/*S0-S7*/	"presence-ps0","presence-ps1","presence-ps2","presence-ps3",
+	"power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+
+	i2c3-mux-oe-n-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "I2C3_MUX_OE_N";
+	};
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	tca_pres1: tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"DASD_BP2_PRESENT_N",
+			"DASD_BP1_PRESENT_N",
+			"DASD_BP0_PRESENT_N";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	pca_pres1: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD",
+			"SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD",
+			"SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N",
+			"SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N",
+			"SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N",
+			"", "", "", "", "", "";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard0-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard0-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard3-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard3-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard4-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard4-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	tmp275@4b {
+		compatible = "ti,tmp275";
+		reg = <0x4b>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	pca9552@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "pcieslot0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "pcieslot1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "pcieslot2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "pcieslot3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcieslot4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "cpu1";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "cpu-vrm1";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "lcd-russel";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca9552@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm6";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm7";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm8";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm9";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm10";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm11";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm12";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm13";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm14";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm15";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca9552@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm16";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm17";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm18";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm19";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm20";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm21";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm22";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm23";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm24";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm25";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm26";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm27";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm28";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm29";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm30";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm31";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca9552@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "planar";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "cpu0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "dasd-pyramid0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "dasd-pyramid1";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "dasd-pyramid2";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "cpu0-vrm0";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "rtc-battery";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "base-blyth";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcieslot6";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcieslot7";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "pcieslot8";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "pcieslot9";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "pcieslot10";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "pcieslot11";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "tpm-wilson";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	si7021-a20@40 {
+		compatible = "silabs,si7020";
+		reg = <0x40>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	max: max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan0: fan@0 {
+			reg = <0>;
+		};
+
+		fan1: fan@1 {
+			reg = <1>;
+		};
+
+		fan2: fan@2 {
+			reg = <2>;
+		};
+
+		fan3: fan@3 {
+			reg = <3>;
+		};
+
+		fan4: fan@4 {
+			reg = <4>;
+		};
+
+		fan5: fan@5 {
+			reg = <5>;
+		};
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "front-sys-id0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "front-check-log0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "front-enc-fault1";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "front-sys-pwron0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca0: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "fan0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "fan1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "fan2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "fan3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "fan4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "fan5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	ucd90320@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	pca_pres3: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"", "", "", "", "", "", "P10_DCM0_PRES", "P10_DCM1_PRES",
+			"", "", "", "", "PRESENT_VRM_DCM0_N", "PRESENT_VRM_DCM1_N",
+			"power-config-full-load", "";
+	};
+
+	pca_pres2: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
+			"SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
+			"SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
+			"SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
+			"SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
+			"SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
+			"", "", "", "";
+	};
+
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	tmp423b@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	tmp423b@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard10-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard10-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "nvme4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "nvme5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "nvme6";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "nvme7";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme8";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme9";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme10";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme11";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "nvme12";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "nvme13";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "nvme14";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "nvme15";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme16";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme17";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme18";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme19";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "nvme20";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "nvme21";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "nvme22";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "nvme23";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+#include "ibm-power10-quad.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
new file mode 100644
index 000000000000..dbadba8eb698
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
@@ -0,0 +1,6086 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/i2c/i2c.h>
+#include "aspeed-g6.dtsi"
+
+/ {
+	model = "IBM SBP1";
+	compatible = "ibm,sbp1-bmc", "aspeed,ast2600";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "LED_BMC_READY";
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			retain-state-suspended;
+			panic-indicator;
+		};
+
+		led-id-tpm {
+			label = "LED_ID_TPM";
+			gpios = <&smb_pex_vr_ctrl 12 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-bat {
+			label = "LED_ID_BAT";
+			gpios = <&smb_pex_vr_ctrl 16 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-mgmt-port2 {
+			label = "LED_ID_MGMT_PORT2";
+			gpios = <&smb_pex_vr_ctrl 17 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-mgmt-port1 {
+			label = "LED_ID_MGMT_PORT1";
+			gpios = <&smb_pex_vr_ctrl 18 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-nic1-port1 {
+			label = "LED_ID_NIC1_PORT1";
+			gpios = <&smb_pex_vr_ctrl 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-nic1-port2 {
+			label = "LED_ID_NIC1_PORT2";
+			gpios = <&smb_pex_vr_ctrl 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-nic2-port1 {
+			label = "LED_ID_NIC2_PORT1";
+			gpios = <&smb_pex_vr_ctrl 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-nic2-port2 {
+			label = "LED_ID_NIC2_PORT2";
+			gpios = <&smb_pex_vr_ctrl 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-m2-ssd2 {
+			label = "LED_ID_M2_SSD2";
+			gpios = <&smb_pex_vr_ctrl 36 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-m2-ssd1 {
+			label = "LED_ID_M2_SSD1";
+			gpios = <&smb_pex_vr_ctrl 37 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dwr-frnt-p {
+			label = "LED_ID_DWR_FRNT_P";
+			gpios = <&smb_svc_pex_cpu3_led 37 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_BLUE>;
+
+			default-state = "on";
+			retain-state-suspended;
+			retain-state-shutdown;
+		};
+
+		led-pwr-dwr-frnt {
+			label = "LED_PWR_DWR_FRNT";
+			gpios = <&smb_svc_pex_cpu3_led 36 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+
+			retain-state-suspended;
+			retain-state-shutdown;
+		};
+
+		led-pwr-dwr-back {
+			label = "LED_PWR_DWR_BACK";
+			gpios = <&smb_pex_vr_ctrl 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+
+			retain-state-suspended;
+			retain-state-shutdown;
+		};
+
+		led-id-dwr-back-p {
+			label = "LED_ID_DWR_BACK_P";
+			gpios = <&smb_pex_vr_ctrl 35 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_BLUE>;
+
+			default-state = "on";
+			retain-state-suspended;
+			retain-state-shutdown;
+		};
+
+		led-id-cpu0 {
+			label = "LED_ID_CPU0";
+			gpios = <&smb_svc_pex_cpu0_led 39 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-cpu1 {
+			label = "LED_ID_CPU1";
+			gpios = <&smb_svc_pex_cpu1_led 39 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-cpu2 {
+			label = "LED_ID_CPU2";
+			gpios = <&smb_svc_pex_cpu2_led 39 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-cpu3 {
+			label = "LED_ID_CPU3";
+			gpios = <&smb_svc_pex_cpu3_led 39 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0e2 {
+			label = "LED_ID_DIMM_C0E2";
+			gpios = <&smb_svc_pex_cpu0_led 20 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0e1 {
+			label = "LED_ID_DIMM_C0E1";
+			gpios = <&smb_svc_pex_cpu0_led 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0f2 {
+			label = "LED_ID_DIMM_C0F2";
+			gpios = <&smb_svc_pex_cpu0_led 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0f1 {
+			label = "LED_ID_DIMM_C0F1";
+			gpios = <&smb_svc_pex_cpu0_led 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0g2 {
+			label = "LED_ID_DIMM_C0G2";
+			gpios = <&smb_svc_pex_cpu0_led 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0g1 {
+			label = "LED_ID_DIMM_C0G1";
+			gpios = <&smb_svc_pex_cpu0_led 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0h2 {
+			label = "LED_ID_DIMM_C0H2";
+			gpios = <&smb_svc_pex_cpu0_led 26 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0h1 {
+			label = "LED_ID_DIMM_C0H1";
+			gpios = <&smb_svc_pex_cpu0_led 27 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0a2 {
+			label = "LED_ID_DIMM_C0A2";
+			gpios = <&smb_svc_pex_cpu0_led 28 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0a1 {
+			label = "LED_ID_DIMM_C0A1";
+			gpios = <&smb_svc_pex_cpu0_led 29 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0b2 {
+			label = "LED_ID_DIMM_C0B2";
+			gpios = <&smb_svc_pex_cpu0_led 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0b1 {
+			label = "LED_ID_DIMM_C0B1";
+			gpios = <&smb_svc_pex_cpu0_led 31 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0c2 {
+			label = "LED_ID_DIMM_C0C2";
+			gpios = <&smb_svc_pex_cpu0_led 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0c1 {
+			label = "LED_ID_DIMM_C0C1";
+			gpios = <&smb_svc_pex_cpu0_led 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0d2 {
+			label = "LED_ID_DIMM_C0D2";
+			gpios = <&smb_svc_pex_cpu0_led 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0d1 {
+			label = "LED_ID_DIMM_C0D1";
+			gpios = <&smb_svc_pex_cpu0_led 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1e2 {
+			label = "LED_ID_DIMM_C1E2";
+			gpios = <&smb_svc_pex_cpu1_led 20 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1e1 {
+			label = "LED_ID_DIMM_C1E1";
+			gpios = <&smb_svc_pex_cpu1_led 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1f2 {
+			label = "LED_ID_DIMM_C1F2";
+			gpios = <&smb_svc_pex_cpu1_led 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1f1 {
+			label = "LED_ID_DIMM_C1F1";
+			gpios = <&smb_svc_pex_cpu1_led 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1g2 {
+			label = "LED_ID_DIMM_C1G2";
+			gpios = <&smb_svc_pex_cpu1_led 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1g1 {
+			label = "LED_ID_DIMM_C1G1";
+			gpios = <&smb_svc_pex_cpu1_led 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1h2 {
+			label = "LED_ID_DIMM_C1H2";
+			gpios = <&smb_svc_pex_cpu1_led 26 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1h1 {
+			label = "LED_ID_DIMM_C1H1";
+			gpios = <&smb_svc_pex_cpu1_led 27 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1a2 {
+			label = "LED_ID_DIMM_C1A2";
+			gpios = <&smb_svc_pex_cpu1_led 28 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1a1 {
+			label = "LED_ID_DIMM_C1A1";
+			gpios = <&smb_svc_pex_cpu1_led 29 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1b2 {
+			label = "LED_ID_DIMM_C1B2";
+			gpios = <&smb_svc_pex_cpu1_led 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1b1 {
+			label = "LED_ID_DIMM_C1B1";
+			gpios = <&smb_svc_pex_cpu1_led 31 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1c2 {
+			label = "LED_ID_DIMM_C1C2";
+			gpios = <&smb_svc_pex_cpu1_led 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1c1 {
+			label = "LED_ID_DIMM_C1C1";
+			gpios = <&smb_svc_pex_cpu1_led 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1d2 {
+			label = "LED_ID_DIMM_C1D2";
+			gpios = <&smb_svc_pex_cpu1_led 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1d1 {
+			label = "LED_ID_DIMM_C1D1";
+			gpios = <&smb_svc_pex_cpu1_led 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2e2 {
+			label = "LED_ID_DIMM_C2E2";
+			gpios = <&smb_svc_pex_cpu2_led 20 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2e1 {
+			label = "LED_ID_DIMM_C2E1";
+			gpios = <&smb_svc_pex_cpu2_led 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2f2 {
+			label = "LED_ID_DIMM_C2F2";
+			gpios = <&smb_svc_pex_cpu2_led 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2f1 {
+			label = "LED_ID_DIMM_C2F1";
+			gpios = <&smb_svc_pex_cpu2_led 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2g2 {
+			label = "LED_ID_DIMM_C2G2";
+			gpios = <&smb_svc_pex_cpu2_led 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2g1 {
+			label = "LED_ID_DIMM_C2G1";
+			gpios = <&smb_svc_pex_cpu2_led 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2h2 {
+			label = "LED_ID_DIMM_C2H2";
+			gpios = <&smb_svc_pex_cpu2_led 26 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2h1 {
+			label = "LED_ID_DIMM_C2H1";
+			gpios = <&smb_svc_pex_cpu2_led 27 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2a2 {
+			label = "LED_ID_DIMM_C2A2";
+			gpios = <&smb_svc_pex_cpu2_led 28 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2a1 {
+			label = "LED_ID_DIMM_C2A1";
+			gpios = <&smb_svc_pex_cpu2_led 29 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2b2 {
+			label = "LED_ID_DIMM_C2B2";
+			gpios = <&smb_svc_pex_cpu2_led 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2b1 {
+			label = "LED_ID_DIMM_C2B1";
+			gpios = <&smb_svc_pex_cpu2_led 31 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2c2 {
+			label = "LED_ID_DIMM_C2C2";
+			gpios = <&smb_svc_pex_cpu2_led 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2c1 {
+			label = "LED_ID_DIMM_C2C1";
+			gpios = <&smb_svc_pex_cpu2_led 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2d2 {
+			label = "LED_ID_DIMM_C2D2";
+			gpios = <&smb_svc_pex_cpu2_led 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2d1 {
+			label = "LED_ID_DIMM_C2D1";
+			gpios = <&smb_svc_pex_cpu2_led 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3e2 {
+			label = "LED_ID_DIMM_C3E2";
+			gpios = <&smb_svc_pex_cpu3_led 20 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3e1 {
+			label = "LED_ID_DIMM_C3E1";
+			gpios = <&smb_svc_pex_cpu3_led 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3f2 {
+			label = "LED_ID_DIMM_C3F2";
+			gpios = <&smb_svc_pex_cpu3_led 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3f1 {
+			label = "LED_ID_DIMM_C3F1";
+			gpios = <&smb_svc_pex_cpu3_led 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3g2 {
+			label = "LED_ID_DIMM_C3G2";
+			gpios = <&smb_svc_pex_cpu3_led 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3g1 {
+			label = "LED_ID_DIMM_C3G1";
+			gpios = <&smb_svc_pex_cpu3_led 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3h2 {
+			label = "LED_ID_DIMM_C3H2";
+			gpios = <&smb_svc_pex_cpu3_led 26 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3h1 {
+			label = "LED_ID_DIMM_C3H1";
+			gpios = <&smb_svc_pex_cpu3_led 27 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3a2 {
+			label = "LED_ID_DIMM_C3A2";
+			gpios = <&smb_svc_pex_cpu3_led 28 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3a1 {
+			label = "LED_ID_DIMM_C3A1";
+			gpios = <&smb_svc_pex_cpu3_led 29 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3b2 {
+			label = "LED_ID_DIMM_C3B2";
+			gpios = <&smb_svc_pex_cpu3_led 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3b1 {
+			label = "LED_ID_DIMM_C3B1";
+			gpios = <&smb_svc_pex_cpu3_led 31 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3c2 {
+			label = "LED_ID_DIMM_C3C2";
+			gpios = <&smb_svc_pex_cpu3_led 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3c1 {
+			label = "LED_ID_DIMM_C3C1";
+			gpios = <&smb_svc_pex_cpu3_led 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3d2 {
+			label = "LED_ID_DIMM_C3D2";
+			gpios = <&smb_svc_pex_cpu3_led 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3d1 {
+			label = "LED_ID_DIMM_C3D1";
+			gpios = <&smb_svc_pex_cpu3_led 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd01 {
+			label = "LED_ID_RSSD01";
+			gpios = <&smb_svc_pex_rssd01_16 0 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd02 {
+			label = "LED_ID_RSSD02";
+			gpios = <&smb_svc_pex_rssd01_16 1 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd03 {
+			label = "LED_ID_RSSD03";
+			gpios = <&smb_svc_pex_rssd01_16 2 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd04 {
+			label = "LED_ID_RSSD04";
+			gpios = <&smb_svc_pex_rssd01_16 3 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd05 {
+			label = "LED_ID_RSSD05";
+			gpios = <&smb_svc_pex_rssd01_16 4 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd06 {
+			label = "LED_ID_RSSD06";
+			gpios = <&smb_svc_pex_rssd01_16 5 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd07 {
+			label = "LED_ID_RSSD07";
+			gpios = <&smb_svc_pex_rssd01_16 6 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd08 {
+			label = "LED_ID_RSSD08";
+			gpios = <&smb_svc_pex_rssd01_16 7 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd09 {
+			label = "LED_ID_RSSD09";
+			gpios = <&smb_svc_pex_rssd01_16 8 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd10 {
+			label = "LED_ID_RSSD10";
+			gpios = <&smb_svc_pex_rssd01_16 9 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd11 {
+			label = "LED_ID_RSSD11";
+			gpios = <&smb_svc_pex_rssd01_16 10 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd12 {
+			label = "LED_ID_RSSD12";
+			gpios = <&smb_svc_pex_rssd01_16 11 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd13 {
+			label = "LED_ID_RSSD13";
+			gpios = <&smb_svc_pex_rssd01_16 12 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd14 {
+			label = "LED_ID_RSSD14";
+			gpios = <&smb_svc_pex_rssd01_16 13 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd15 {
+			label = "LED_ID_RSSD15";
+			gpios = <&smb_svc_pex_rssd01_16 14 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd16 {
+			label = "LED_ID_RSSD16";
+			gpios = <&smb_svc_pex_rssd01_16 15 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd17 {
+			label = "LED_ID_RSSD17";
+			gpios = <&smb_svc_pex_rssd17_32 0 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd18 {
+			label = "LED_ID_RSSD18";
+			gpios = <&smb_svc_pex_rssd17_32 1 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd19 {
+			label = "LED_ID_RSSD19";
+			gpios = <&smb_svc_pex_rssd17_32 2 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd20 {
+			label = "LED_ID_RSSD20";
+			gpios = <&smb_svc_pex_rssd17_32 3 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd21 {
+			label = "LED_ID_RSSD21";
+			gpios = <&smb_svc_pex_rssd17_32 4 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd22 {
+			label = "LED_ID_RSSD22";
+			gpios = <&smb_svc_pex_rssd17_32 5 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd23 {
+			label = "LED_ID_RSSD23";
+			gpios = <&smb_svc_pex_rssd17_32 6 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd24 {
+			label = "LED_ID_RSSD24";
+			gpios = <&smb_svc_pex_rssd17_32 7 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd25 {
+			label = "LED_ID_RSSD25";
+			gpios = <&smb_svc_pex_rssd17_32 8 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd26 {
+			label = "LED_ID_RSSD26";
+			gpios = <&smb_svc_pex_rssd17_32 9 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd27 {
+			label = "LED_ID_RSSD27";
+			gpios = <&smb_svc_pex_rssd17_32 10 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd28 {
+			label = "LED_ID_RSSD28";
+			gpios = <&smb_svc_pex_rssd17_32 11 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd29 {
+			label = "LED_ID_RSSD29";
+			gpios = <&smb_svc_pex_rssd17_32 12 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd30 {
+			label = "LED_ID_RSSD30";
+			gpios = <&smb_svc_pex_rssd17_32 13 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd31 {
+			label = "LED_ID_RSSD31";
+			gpios = <&smb_svc_pex_rssd17_32 14 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd32 {
+			label = "LED_ID_RSSD32";
+			gpios = <&smb_svc_pex_rssd17_32 15 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm01 {
+			label = "LED_ID_FAN_ASM01";
+			gpios = <&smb_svc_pex_rssd01_16 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm02 {
+			label = "LED_ID_FAN_ASM02";
+			gpios = <&smb_svc_pex_rssd01_16 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm03 {
+			label = "LED_ID_FAN_ASM03";
+			gpios = <&smb_svc_pex_rssd01_16 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm04 {
+			label = "LED_ID_FAN_ASM04";
+			gpios = <&smb_svc_pex_rssd01_16 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm05 {
+			label = "LED_ID_FAN_ASM05";
+			gpios = <&smb_svc_pex_rssd01_16 36 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm06 {
+			label = "LED_ID_FAN_ASM06";
+			gpios = <&smb_svc_pex_rssd01_16 37 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm07 {
+			label = "LED_ID_FAN_ASM07";
+			gpios = <&smb_svc_pex_rssd17_32 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm08 {
+			label = "LED_ID_FAN_ASM08";
+			gpios = <&smb_svc_pex_rssd17_32 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm09 {
+			label = "LED_ID_FAN_ASM09";
+			gpios = <&smb_svc_pex_rssd17_32 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm10 {
+			label = "LED_ID_FAN_ASM10";
+			gpios = <&smb_svc_pex_rssd17_32 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm11 {
+			label = "LED_ID_FAN_ASM11";
+			gpios = <&smb_svc_pex_rssd17_32 36 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm12 {
+			label = "LED_ID_FAN_ASM12";
+			gpios = <&smb_svc_pex_rssd17_32 37 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&p12v_vd 0>, <&p5v_aux_vd 0>, <&p5v_bmc_aux_vd 0>, <&p3v3_aux_vd 0>,
+			<&p3v3_bmc_aux_vd 0>, <&p1v8_bmc_aux_vd 0>, <&adc1 4>, <&adc0 2>, <&adc1 0>,
+			<&p2V5_aux_vd 0>, <&p3v3_rtc_vd 0>;
+	};
+
+	p12v_vd: voltage-divider1 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 3>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1127/127 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <15>;
+		full-ohms = <133>;
+	};
+
+	p5v_aux_vd: voltage-divider2 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 5>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1365/365 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <50>;
+		full-ohms = <187>;
+	};
+
+	p5v_bmc_aux_vd: voltage-divider3 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 3>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1365/365 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <50>;
+		full-ohms = <187>;
+	};
+
+	p3v3_aux_vd: voltage-divider4 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 2>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1698/698 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <14>;
+		full-ohms = <34>;
+	};
+
+	p3v3_bmc_aux_vd: voltage-divider5 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 7>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1698/698 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <14>;
+		full-ohms = <34>;
+	};
+
+	p1v8_bmc_aux_vd: voltage-divider6 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 6>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 4000/3000 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <3>;
+		full-ohms = <4>;
+	};
+
+	p2V5_aux_vd: voltage-divider7 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 1>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 2100/1100 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <11>;
+		full-ohms = <21>;
+	};
+
+	p3v3_rtc_vd: voltage-divider8 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 7>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 231000/100000 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <100>;
+		full-ohms = <231>;
+	};
+
+	thermistor0: thermistor-0 {
+		compatible = "epcos,b57891s0103";
+		pullup-uv = <3300000>;
+		pullup-ohm = <10000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc0 0>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor1: thermistor-1 {
+		compatible = "epcos,b57891s0103";
+		pullup-uv = <3300000>;
+		pullup-ohm = <10000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc0 1>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor2: thermistor-2 {
+		compatible = "epcos,b57891s0103";
+		pullup-uv = <3300000>;
+		pullup-ohm = <10000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc0 4>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor3: thermistor-3 {
+		compatible = "epcos,b57891s0103";
+		pullup-uv = <3300000>;
+		pullup-ohm = <10000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc0 5>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	p12v: fixedregulator-p12v {
+		compatible = "regulator-fixed";
+		regulator-name = "p12v";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	p3v3_bmc_aux: fixedregulator-p3v3-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p3v3_bmc_aux";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	p1v8_bmc_aux: fixedregulator-p1v8-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8_bmc_aux";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	p1v2_bmc_aux: fixedregulator-p1v2-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v2_bmc_aux";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	p12v-a-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p12v_a>;
+	};
+
+	p12v-b-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p12v_b>;
+	};
+
+	p12v-c-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p12v_c>;
+	};
+
+	p12v-d-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p12v_d>;
+	};
+
+	pvccinfaon-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccinfaon_cpu0>;
+	};
+
+	pvccfa-ehv-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_cpu0>;
+	};
+
+	pvnn-main-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvnn_main_cpu0>;
+	};
+
+	pvccin-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccin_cpu0>;
+	};
+
+	pvccfa-ehv-fivra-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_fivra_cpu0>;
+	};
+
+	pvccd-hv-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccd_hv_cpu0>;
+	};
+
+	pvpp-hbm-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvpp_hbm_cpu0>;
+	};
+
+	pvccinfaon-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccinfaon_cpu1>;
+	};
+
+	pvccfa-ehv-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_cpu1>;
+	};
+
+	pvnn-main-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvnn_main_cpu1>;
+	};
+
+	pvccin-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccin_cpu1>;
+	};
+
+	pvccfa-ehv-fivra-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_fivra_cpu1>;
+	};
+
+	pvccd-hv-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccd_hv_cpu1>;
+	};
+
+	pvpp-hbm-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvpp_hbm_cpu1>;
+	};
+
+	pvccinfaon-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccinfaon_cpu2>;
+	};
+
+	pvccfa-ehv-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_cpu2>;
+	};
+
+	pvnn-main-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvnn_main_cpu2>;
+	};
+
+	pvccin-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccin_cpu2>;
+	};
+
+	pvccfa-ehv-fivra-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_fivra_cpu2>;
+	};
+
+	pvccd-hv-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccd_hv_cpu2>;
+	};
+
+	pvpp-hbm-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvpp_hbm_cpu2>;
+	};
+
+	pvccinfaon-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccinfaon_cpu3>;
+	};
+
+	pvccfa-ehv-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_cpu3>;
+	};
+
+	pvnn-main-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvnn_main_cpu3>;
+	};
+
+	pvccin-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccin_cpu3>;
+	};
+
+	pvccfa-ehv-fivra-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_fivra_cpu3>;
+	};
+
+	pvccd-hv-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccd_hv_cpu3>;
+	};
+
+	pvpp-hbm-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvpp_hbm_cpu3>;
+	};
+
+	p1v05-pch-aux-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p1v05_pch_aux>;
+	};
+
+	p1v8-pch-aux-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p1v8_pch_aux>;
+	};
+
+	p3v3-pch-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p3v3_pch>;
+	};
+
+	p5v-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p5v>;
+	};
+
+	smb-m2-ssb-ssd2 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_smb_m2_ssb_ssd2>;
+	};
+
+	smb-m2-ssb-ssd1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_smb_m2_ssb_ssd1>;
+	};
+
+	ssb-rssd01-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd01>;
+	};
+
+	ssb-rssd01-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd01>;
+	};
+
+	ssb-rssd02-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd02>;
+	};
+
+	ssb-rssd02-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd02>;
+	};
+
+	ssb-rssd03-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd03>;
+	};
+
+	ssb-rssd03-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd03>;
+	};
+
+	ssb-rssd04-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd04>;
+	};
+
+	ssb-rssd04-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd04>;
+	};
+
+	ssb-rssd05-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd05>;
+	};
+
+	ssb-rssd05-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd05>;
+	};
+
+	ssb-rssd06-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd06>;
+	};
+
+	ssb-rssd06-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd06>;
+	};
+
+	ssb-rssd07-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd07>;
+	};
+
+	ssb-rssd07-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd07>;
+	};
+
+	ssb-rssd08-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd08>;
+	};
+
+	ssb-rssd08-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd08>;
+	};
+
+	ssb-rssd09-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd09>;
+	};
+
+	ssb-rssd09-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd09>;
+	};
+
+	ssb-rssd10-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd10>;
+	};
+
+	ssb-rssd10-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd10>;
+	};
+
+	ssb-rssd11-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd11>;
+	};
+
+	ssb-rssd11-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd11>;
+	};
+
+	ssb-rssd12-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd12>;
+	};
+
+	ssb-rssd12-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd12>;
+	};
+
+	ssb-rssd13-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd13>;
+	};
+
+	ssb-rssd13-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd13>;
+	};
+
+	ssb-rssd14-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd14>;
+	};
+
+	ssb-rssd14-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd14>;
+	};
+
+	ssb-rssd15-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd15>;
+	};
+
+	ssb-rssd15-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd15>;
+	};
+
+	ssb-rssd16-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd16>;
+	};
+
+	ssb-rssd16-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd16>;
+	};
+
+	ssb-rssd17-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd17>;
+	};
+
+	ssb-rssd17-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd17>;
+	};
+
+	ssb-rssd18-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd18>;
+	};
+
+	ssb-rssd18-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd18>;
+	};
+
+	ssb-rssd19-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd19>;
+	};
+
+	ssb-rssd19-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd19>;
+	};
+
+	ssb-rssd20-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd20>;
+	};
+
+	ssb-rssd20-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd20>;
+	};
+
+	ssb-rssd21-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd21>;
+	};
+
+	ssb-rssd21-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd21>;
+	};
+
+	ssb-rssd22-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd22>;
+	};
+
+	ssb-rssd22-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd22>;
+	};
+
+	ssb-rssd23-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd23>;
+	};
+
+	ssb-rssd23-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd23>;
+	};
+
+	ssb-rssd24-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd24>;
+	};
+
+	ssb-rssd24-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd24>;
+	};
+
+	ssb-rssd25-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd25>;
+	};
+
+	ssb-rssd25-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd25>;
+	};
+
+	ssb-rssd26-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd26>;
+	};
+
+	ssb-rssd26-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd26>;
+	};
+
+	ssb-rssd27-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd27>;
+	};
+
+	ssb-rssd27-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd27>;
+	};
+
+	ssb-rssd28-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd28>;
+	};
+
+	ssb-rssd28-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd28>;
+	};
+
+	ssb-rssd29-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd29>;
+	};
+
+	ssb-rssd29-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd29>;
+	};
+
+	ssb-rssd30-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd30>;
+	};
+
+	ssb-rssd30-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd30>;
+	};
+
+	ssb-rssd31-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd31>;
+	};
+
+	ssb-rssd31-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd31>;
+	};
+
+	ssb-rssd32-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd32>;
+	};
+
+	ssb-rssd32-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd32>;
+	};
+
+	p3v3-nic-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p3v3_nic>;
+	};
+
+	p1v8-nic-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p1v8_nic>;
+	};
+
+	p1v2-nic-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p1v2_nic>;
+	};
+
+	pvcore-nic1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvcore_nic1>;
+	};
+
+	pvcore-nic2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvcore_nic2>;
+	};
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "disabled";
+};
+
+&gpio1 {
+	status = "disabled";
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vgahs_default &pinctrl_vgavs_default>;
+};
+
+&mdio2 {
+	status = "okay";
+
+	ethphy2: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		reset-gpios = <&gpio0 ASPEED_GPIO(V, 7) GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <300>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		reset-gpios = <&gpio0 ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <300>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&adc0 {
+	status = "okay";
+	vref-supply = <&p1v8_bmc_aux>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		     &pinctrl_adc1_default
+		     &pinctrl_adc2_default
+		     &pinctrl_adc3_default
+		     &pinctrl_adc4_default
+		     &pinctrl_adc5_default
+		     &pinctrl_adc6_default
+		     &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+	vref-supply = <&p1v8_bmc_aux>;
+	aspeed,battery-sensing;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default
+		     &pinctrl_adc9_default
+		     &pinctrl_adc10_default
+		     &pinctrl_adc11_default
+		     &pinctrl_adc12_default
+		     &pinctrl_adc13_default
+		     &pinctrl_adc15_default>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&gpio0 {
+	status = "okay";
+	gpio-line-names =
+	/* A0 - A7 */
+	"", "", "", "", "", "", "", "",
+	/* B0 - B7 */
+	"", "", "FM_ADR_TRIGGER_R_N", "RST_PLTRST_BUF_N", "BMC_TPM_RESET_N", "BMC_TPM_IRQ_N",
+	"PCH_TPM_RESET_N", "PCH_TPM_IRQ_N",
+	/* C0 - C7 */
+	"", "", "", "", "", "", "", "",
+	/* D0 - D7 */
+	"", "", "", "", "", "", "", "",
+	/* E0 - E7 */
+	"", "", "", "", "", "", "", "",
+	/* F0 - F7 */
+	"", "", "", "BMC_MUX_CPU1_RST_INT_N", "BMC_MUX_CPU2_RST_INT_N", "", "", "",
+	/* G0 - G7 */
+	"FM_SSD_CLK_DRVR1_EN", "FM_CK440Q_DEV_EN", "BMC_MAC1_RESET_N", "FM_DB2000_DEV_EN",
+	"FM_CPU_RMCA_LVT3_N", "FM_CPU_CATERR_LVT3_N", "FM_DBP_PRESENT_N", "",
+	/* H0 - H7 */
+	"SMB_SVC_PEX_RSSD17_32_INT", "LED_BMC_RDY", "RST_DBP_N", "", "", "", "", "",
+	/* I0 - I7 */
+	"JTAG_MUX_MODE_SEL", "JTAG_MUX_TRANS_ENBL", "JTAG_MUX_LSP_SEL5", "JTAG_MUX_MSTR_SEL",
+	"JTAG_MUX_LSP_SEL3", "", "JTAG_MUX_ENBL_N", "JTAG_MUX_RST_N",
+	/* J0 - J7 */
+	"", "", "", "", "", "", "", "",
+	/* K0 - K7 */
+	"", "", "", "", "", "", "", "",
+	/* L0 - L7 */
+	"", "", "", "", "RST_RTCRST_N", "RST_SRTCRST_N", "", "",
+	/* M0 - M7 */
+	"BMC_UART1_CTS_N", "BMC_UART1_DCD_N", "BMC_UART1_DSR_N", "BMC_UART1_RI_N",
+	"BMC_UART1_DTR_N", "BMC_UART1_RTS_N", "", "",
+	/* N0 - N7 */
+	"IRQ_BMC_PCH_NMI", "", "FM_PCH_BMC_THERMTRIP_N", "FM_BIOS_POST_CMPLT_N", "RST_PLTRST_N",
+	"FM_FLASH_SEC_OVRD", "FM_SMI_ACTIVE_N", "PWRGD_DBP",
+	/* O0 - O7 */
+	"CATERR_CPU2_EN", "H_LVT1_THERMTRIP_N", "CATERR_CPU3_EN", "SMB_SVC_PEX_CPU0_LED_INT",
+	"H_LVT1_MEMTRIP_N", "", "CATERR_CPU1_EN", "FM_PCH_ADR_COMPLETE_N",
+	/* P0 - P7 */
+	"PWRGD_SYS_PWROK", "PWRGD_PCH_PWROK", "BMC_MUX_CPU3_RST_INT_N", "BMC_MUX_SVC_RSSD_INT",
+	"FM_SLPS4_N", "IRQ_SML0_ALERT_N", "FM_SLPS3_N", "LED_BMC_HB",
+	/* Q0 - Q7 */
+	"", "PEX_BMC_RST", "PEX_VR_CTRL_RST", "PEX_NIC_RST", "PEX_CPU0_LED_RST", "PEX_CPU1_LED_RST",
+	"PEX_CPU2_LED_RST", "PEX_CPU3_LED_RST",
+	/* R0 - R7 */
+	"BMC_MUX_FANSSB_RSSD17_32_RST_INT_N", "BMC_MUX_FANPWM_RSSD01_16_RST_INT_N",
+	"BMC_MUX_SVC_VR_RST_INT_N", "BMC_MUX_NIC_RST_INT_N", "BMC_MUX_SVC_EXP_RST_INT_N",
+	"FM_CPU_ERR2_LVT3_N", "BMC_MUX_CPU0_RST_INT_N", "BMC_MUX_M2_RST_INT_N",
+	/* S0 - S7 */
+	"SMB_SVC_PEX_RSSD01_16_INT", "RST_PCH_RSMRST_R_N", "", "", "BMC_ROT_FPGA_RESET_N",
+	"FM_SSD_CLK_DRVR0_EN", "", "",
+	/* T0 - T7 */
+	"", "", "", "", "", "", "", "",
+	/* U0 - U7 */
+	"", "", "", "", "", "", "", "",
+	/* V0 - V7 */
+	"BMC_PEX_IRQ_INT", "RTC_BATT_TEST", "SMB_PEX_VR_CTRL_INT", "SMB_SVC_PEX_CPU3_LED_INT",
+	"PWRGD_CPUPWRGD", "SMB_SVC_PEX_CPU2_LED_INT", "SMB_SVC_PEX_CPU1_LED_INT",
+	"BMC_MAC0_RESET_N",
+	/* W0 - W7 */
+	"", "", "", "", "", "", "", "",
+	/* X0 - X7 */
+	"", "", "", "", "", "", "", "",
+	/* Y0 - Y7 */
+	"FM_THROTTLE_N", "FM_PASSWORD_CLEAR_N", "H_LVT3_CATERR_DLY_N", "FM_CPU_OL_INT_R_N", "", "",
+	"", "",
+	/* Z0 - Z7 */
+	"FM_CPU_ERR0_LVT3_N", "FM_CPU_ERR1_LVT3_N", "BMC_MUX_VR_PCH_CPU_RST_INT_N",
+	"JTAG_MUX_LSP_SEL1", "", "JTAG_MUX_LSP_SEL4", "JTAG_MUX_LSP_SEL2", "";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_unbiased_default>;
+};
+
+&pinctrl {
+	pinctrl_gpio0_unbiased_default: gpio_default {
+		pins = "AB15", "AD14", "R23", "A18", "AD24", "AD15", "AE14", "AC15", "U25", "AA24",
+		       "V24", "W26", "AA23", "V26", "U24", "V25", "AE15", "C15", "F15";
+		bias-disable;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	bmc_mux_nic: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_nic: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&gpio0 ASPEED_GPIO(Q, 3) GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <19 1>, <22 6>, <30 6>, <38 2>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"IRQ_NIC2_OVT_WRNG", "FM_NIC2_ALLSTANDBY_N", "IRQ_NIC2_OVT_SHTDN",
+				"SMB_VR_PVCORE_NIC2_ALERT_N", "FM_NIC2_PERST1_N",
+				"SMB_NIC2_ALERT_N", "FM_NIC2_PERST3_N", "FM_NIC2_PERST2_N",
+				/* GPORT1 */
+				"FM_NIC1_RST_N", "FM_NIC1_PERST0_N", "FM_NIC1_PERST2_N",
+				"FM_NIC1_PERST3_N", "SMB_NIC1_ALERT_N", "FM_NIC1_PERST1_N",
+				"SMB_VR_PVCORE_NIC1_ALERT_N", "IRQ_NIC1_OVT_SHTDN",
+				/* GPORT2 */
+				"SMB_VR_P3V3_NIC_ALERT_N", "FM_NIC2_FLASH_PRSNT",
+				"FM_NIC1_FLASH_PRSNT", "",
+				/* GPORT3 */
+				"FM_NIC2_PERST0_N", "FM_NIC2_RST_N", "", "", "", "", "", "",
+				/* GPORT4 */
+				"FM_NIC1_ALLSTANDBY_N", "IRQ_NIC1_OVT_WRNG", "", "", "", "", "", "",
+				/* GPORT5 */
+				"SMB_VR_P1V8_NIC_ALERT_N", "SMB_VR_P1V2_NIC_ALERT_N", "", "";
+
+				pinctrl-0 = <&U62160_pins>;
+				pinctrl-names = "default";
+				U62160_pins: cfg-pins {
+					pins = "gp03", "gp16", "gp20", "gp50", "gp51";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvcore_nic2: ir38263-pvcore-nic2@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "pvcore_nic2";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvcore_nic1: ir38263-pvcore-nic1@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "pvcore_nic1";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p3v3_nic: ir38263-p3v3-nic@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "p3v3_nic";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p1v2_nic: ir38263-p1v2-nic@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "p1v2_nic";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p1v8_nic: ir38263-p1v8-nic@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "p1v8_nic";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2cmux1: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 7) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_m2_ssb_ssd1: regulator@3a {
+				compatible = "maxim,max5978";
+				reg = <0x3a>;
+				vss1-supply = <&p3v3_aux>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						label = "m2_ssb_ssd1:green:power";
+						default-state = "off";
+					};
+				};
+
+				regulators {
+					sw0_smb_m2_ssb_ssd1: sw0 {
+						shunt-resistor-micro-ohms = <12000>;
+						regulator-over-current-protection;
+						regulator-oc-protection-microamp = <2800000>;
+						regulator-name = "p3v3_m2_ssd1";
+						regulator-enable-ramp-delay = <10000>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_m2_ssb_ssd2: regulator@3a {
+				compatible = "maxim,max5978";
+				reg = <0x3a>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <39 IRQ_TYPE_LEVEL_LOW>;
+				vss1-supply = <&p3v3_aux>;
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						label = "m2_ssb_ssd2:green:power";
+						default-state = "off";
+					};
+				};
+
+				regulators {
+					sw0_smb_m2_ssb_ssd2: sw0 {
+						shunt-resistor-micro-ohms = <12000>;
+						regulator-over-current-protection;
+						regulator-oc-protection-microamp = <2800000>;
+						regulator-name = "p3v3_m2_ssd2";
+						regulator-enable-ramp-delay = <10000>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	multi-master;
+	bus-frequency = <1000000>;
+
+	bmc-slave@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2cmux2: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(Z, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p1v05_pch_aux: ir38263-p1v05-pch-aux@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "p1v05_pch_aux";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p1v8_pch_aux: ir38060-p1v8-pch-aux@40 {
+				compatible = "infineon,ir38060";
+				reg = <0x40>;
+
+				regulator-name = "p1v8_pch_aux";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	i2cmux13: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 6) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_cpu0_event: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&smb_svc_pex_cpu0_led 16 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"PWRGD_CHD_CPU0", "PWRGD_CHC_CPU0",
+				"PWRGD_CHB_CPU0", "PWRGD_CHA_CPU0",
+				"PWRGD_CHE_CPU0", "PWRGD_CHF_CPU0",
+				"PWRGD_CHG_CPU0", "PWRGD_CHH_CPU0",
+				/* GPORT1 */
+				"SMB_VR_PVPP_HBM_CPU0_ALERT_N", "SMB_VR_PVCCINFAON_CPU0_ALERT_N",
+				"SMB_VR_PVNN_MAIN_CPU0_ALERT_N", "SMB_VR_PVCCD_HV_CPU0_ALERT_N",
+				"SMB_VR_PVCCIN_CPU0_ALERT_N", "SEL_SMB_DIMM_CPU0",
+				"", "",
+				/* GPORT2 */
+				"PWRGD_LVC3_CPU0_AB_DRAM_G", "PWRGD_LVC3_CPU0_CD_DRAM_G",
+				"PWRGD_LVC3_CPU0_EF_DRAM_G", "PWRGD_LVC3_CPU0_GH_DRAM_G",
+				/* GPORT3 */
+				"FM_CPU0_DISABLE_COD_N", "",
+				"RST_LVC3_CPU0_RESET_N", "PWRGD_LVC3_CPU0_PWRGOOD",
+				"PWRGD_PLT_AUX_CPU0_LVT3", "",
+				"", "",
+				/* GPORT4 */
+				"H_LVT3_CPU0_PROCHOT_N", "H_LVT3_CPU0_MEMHOT_IN_N",
+				"H_LVT3_CPU0_MEMHOT_OUT_N", "H_LVT3_CPU0_MEMTRIP_OUT_N",
+				"H_LVT3_CPU0_THERMTRIP_OUT_N", "",
+				"H_LVT3_CPU0_NMI", "FM_S3M_CPU0_CD_INIT_ERROR",
+				/* GPORT5 */
+				"FM_CPU0_PKG_ID0", "FM_CPU0_PKG_ID1",
+				"FM_CPU0_PROC_ID0", "FM_CPU0_PROC_ID1";
+
+				pinctrl-0 = <&U62080_pins>;
+				pinctrl-names = "default";
+				U62080_pins: cfg-pins {
+					pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvccinfaon-pvccfa-cpu0@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccinfaon_cpu0: vout0 {
+						regulator-name = "pvccinfaon_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_cpu0: vout1 {
+						regulator-name = "pvccfa_ehv_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+			tda38640-pvnn-main-cpu0@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvnn_main_cpu0: vout {
+						regulator-name = "pvnn_main_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mp2973-pvccin-pvccfa-cpu0@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccin_cpu0: vout0 {
+						regulator-name = "pvccin_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_fivra_cpu0: vout1 {
+						regulator-name = "pvccfa_ehv_fivra_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvccd-hv-cpu0@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				infineon,en-pin-fixed-level;
+
+				regulators {
+					pvccd_hv_cpu0: vout {
+						regulator-name = "pvccd_hv_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvpp-hbm-cpu0@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvpp_hbm_cpu0: vout {
+						regulator-name = "pvpp_hbm_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2cmux4: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(F, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_cpu1_event: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&smb_svc_pex_cpu1_led 16 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"PWRGD_CHD_CPU1", "PWRGD_CHC_CPU1",
+				"PWRGD_CHB_CPU1", "PWRGD_CHA_CPU1",
+				"PWRGD_CHE_CPU1", "PWRGD_CHF_CPU1",
+				"PWRGD_CHG_CPU1", "PWRGD_CHH_CPU1",
+				/* GPORT1 */
+				"SMB_VR_PVPP_HBM_CPU1_ALERT_N", "SMB_VR_PVCCINFAON_CPU1_ALERT_N",
+				"SMB_VR_PVNN_MAIN_CPU1_ALERT_N", "SMB_VR_PVCCD_HV_CPU1_ALERT_N",
+				"SMB_VR_PVCCIN_CPU1_ALERT_N", "SEL_SMB_DIMM_CPU1",
+				"", "",
+				/* GPORT2 */
+				"PWRGD_LVC3_CPU1_AB_DRAM_G", "PWRGD_LVC3_CPU1_CD_DRAM_G",
+				"PWRGD_LVC3_CPU1_EF_DRAM_G", "PWRGD_LVC3_CPU1_GH_DRAM_G",
+				/* GPORT3 */
+				"FM_CPU1_DISABLE_COD_N", "",
+				"RST_LVC3_CPU1_RESET_N", "PWRGD_LVC3_CPU1_PWRGOOD",
+				"PWRGD_PLT_AUX_CPU1_LVT3", "",
+				"", "",
+				/* GPORT4 */
+				"H_LVT3_CPU1_PROCHOT_N", "H_LVT3_CPU1_MEMHOT_IN_N",
+				"H_LVT3_CPU1_MEMHOT_OUT_N", "H_LVT3_CPU1_MEMTRIP_OUT_N",
+				"H_LVT3_CPU1_THERMTRIP_OUT_N", "",
+				"H_LVT3_CPU1_NMI", "FM_S3M_CPU1_CD_INIT_ERROR",
+				/* GPORT5 */
+				"FM_CPU1_PKG_ID0", "FM_CPU1_PKG_ID1",
+				"FM_CPU1_PROC_ID0", "FM_CPU1_PROC_ID1";
+
+				pinctrl-0 = <&U62090_pins>;
+				pinctrl-names = "default";
+				U62090_pins: cfg-pins {
+					pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvccinfaon-pvccfa-cpu1@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccinfaon_cpu1: vout0 {
+						regulator-name = "pvccinfaon_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_cpu1: vout1 {
+						regulator-name = "pvccfa_ehv_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+			tda38640-pvnn-main-cpu1@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvnn_main_cpu1: vout {
+						regulator-name = "pvnn_main_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mp2973-pvccin-pvccfa-cpu1@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccin_cpu1: vout0 {
+						regulator-name = "pvccin_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_fivra_cpu1: vout1 {
+						regulator-name = "pvccfa_ehv_fivra_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvccd-hv-cpu1@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				infineon,en-pin-fixed-level;
+
+				regulators {
+					pvccd_hv_cpu1: vout {
+						regulator-name = "pvccd_hv_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvpp-hbm-cpu1@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvpp_hbm_cpu1: vout {
+						regulator-name = "pvpp_hbm_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2cmux3: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_cpu2_event: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&smb_svc_pex_cpu2_led 16 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"PWRGD_CHD_CPU2", "PWRGD_CHC_CPU2",
+				"PWRGD_CHB_CPU2", "PWRGD_CHA_CPU2",
+				"PWRGD_CHE_CPU2", "PWRGD_CHF_CPU2",
+				"PWRGD_CHG_CPU2", "PWRGD_CHH_CPU2",
+				/* GPORT1 */
+				"SMB_VR_PVPP_HBM_CPU2_ALERT_N", "SMB_VR_PVCCINFAON_CPU2_ALERT_N",
+				"SMB_VR_PVNN_MAIN_CPU2_ALERT_N", "SMB_VR_PVCCD_HV_CPU2_ALERT_N",
+				"SMB_VR_PVCCIN_CPU2_ALERT_N", "SEL_SMB_DIMM_CPU2",
+				"", "",
+				/* GPORT2 */
+				"PWRGD_LVC3_CPU2_AB_DRAM_G", "PWRGD_LVC3_CPU2_CD_DRAM_G",
+				"PWRGD_LVC3_CPU2_EF_DRAM_G", "PWRGD_LVC3_CPU2_GH_DRAM_G",
+				/* GPORT3 */
+				"FM_CPU2_DISABLE_COD_N", "",
+				"RST_LVC3_CPU2_RESET_N", "PWRGD_LVC3_CPU2_PWRGOOD",
+				"PWRGD_PLT_AUX_CPU2_LVT3", "",
+				"", "",
+				/* GPORT4 */
+				"H_LVT3_CPU2_PROCHOT_N", "H_LVT3_CPU2_MEMHOT_IN_N",
+				"H_LVT3_CPU2_MEMHOT_OUT_N", "H_LVT3_CPU2_MEMTRIP_OUT_N",
+				"H_LVT3_CPU2_THERMTRIP_OUT_N", "",
+				"H_LVT3_CPU2_NMI", "FM_S3M_CPU2_CD_INIT_ERROR",
+				/* GPORT5 */
+				"FM_CPU2_PKG_ID0", "FM_CPU2_PKG_ID1",
+				"FM_CPU2_PROC_ID0", "FM_CPU2_PROC_ID1";
+
+				pinctrl-0 = <&U62100_pins>;
+				pinctrl-names = "default";
+				U62100_pins: cfg-pins {
+					pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvccinfaon-pvccfa-cpu2@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccinfaon_cpu2: vout0 {
+						regulator-name = "pvccinfaon_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_cpu2: vout1 {
+						regulator-name = "pvccfa_ehv_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+			tda38640-pvnn-main-cpu2@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvnn_main_cpu2: vout {
+						regulator-name = "pvnn_main_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mp2973-pvccin-pvccfa-cpu2@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccin_cpu2: vout0 {
+						regulator-name = "pvccin_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_fivra_cpu2: vout1 {
+						regulator-name = "pvccfa_ehv_fivra_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvccd-hv-cpu2@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				infineon,en-pin-fixed-level;
+
+				regulators {
+					pvccd_hv_cpu2: vout {
+						regulator-name = "pvccd_hv_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvpp-hbm-cpu2@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvpp_hbm_cpu2: vout {
+						regulator-name = "pvpp_hbm_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	i2cmux22: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(P, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_cpu3_event: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&smb_svc_pex_cpu3_led 16 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"PWRGD_CHD_CPU3", "PWRGD_CHC_CPU3",
+				"PWRGD_CHB_CPU3", "PWRGD_CHA_CPU3",
+				"PWRGD_CHE_CPU3", "PWRGD_CHF_CPU3",
+				"PWRGD_CHG_CPU3", "PWRGD_CHH_CPU3",
+				/* GPORT1 */
+				"SMB_VR_PVPP_HBM_CPU3_ALERT_N", "SMB_VR_PVCCINFAON_CPU3_ALERT_N",
+				"SMB_VR_PVNN_MAIN_CPU3_ALERT_N", "SMB_VR_PVCCD_HV_CPU3_ALERT_N",
+				"SMB_VR_PVCCIN_CPU3_ALERT_N", "SEL_SMB_DIMM_CPU3",
+				"", "",
+				/* GPORT2 */
+				"PWRGD_LVC3_CPU3_AB_DRAM_G", "PWRGD_LVC3_CPU3_CD_DRAM_G",
+				"PWRGD_LVC3_CPU3_EF_DRAM_G", "PWRGD_LVC3_CPU3_GH_DRAM_G",
+				/* GPORT3 */
+				"FM_CPU3_DISABLE_COD_N", "",
+				"RST_LVC3_CPU3_RESET_N", "PWRGD_LVC3_CPU3_PWRGOOD",
+				"PWRGD_PLT_AUX_CPU3_LVT3", "",
+				"", "",
+				/* GPORT4 */
+				"H_LVT3_CPU3_PROCHOT_N", "H_LVT3_CPU3_MEMHOT_IN_N",
+				"H_LVT3_CPU3_MEMHOT_OUT_N", "H_LVT3_CPU3_MEMTRIP_OUT_N",
+				"H_LVT3_CPU3_THERMTRIP_OUT_N", "",
+				"H_LVT3_CPU3_NMI", "FM_S3M_CPU3_CD_INIT_ERROR",
+				/* GPORT5 */
+				"FM_CPU3_PKG_ID0", "FM_CPU3_PKG_ID1",
+				"FM_CPU3_PROC_ID0", "FM_CPU3_PROC_ID1";
+
+				pinctrl-0 = <&U62110_pins>;
+				pinctrl-names = "default";
+				U62110_pins: cfg-pins {
+					pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvccinfaon-pvccfa-cpu3@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccinfaon_cpu3: vout0 {
+						regulator-name = "pvccinfaon_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_cpu3: vout1 {
+						regulator-name = "pvccfa_ehv_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+			tda38640-pvnn-main-cpu3@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvnn_main_cpu3: vout {
+						regulator-name = "pvnn_main_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mp2973-pvccin-pvccfa-cpu3@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccin_cpu3: vout0 {
+						regulator-name = "pvccin_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_fivra_cpu3: vout1 {
+						regulator-name = "pvccfa_ehv_fivra_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvccd-hv-cpu3@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				infineon,en-pin-fixed-level;
+
+				regulators {
+					pvccd_hv_cpu3: vout {
+						regulator-name = "pvccd_hv_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvpp-hbm-cpu3@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvpp_hbm_cpu3: vout {
+						regulator-name = "pvpp_hbm_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	i2cmux14: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 1) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux15: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 11 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux16: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 2 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux17: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 0 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux18: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 3 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux19: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 9 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_rssd17_32: pinctrl@20 {
+				compatible = "cypress,cy8c9560";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&bmc_pex_irq>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&bmc_pex_irq 19 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <48 12>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"RSSD17_SMBRST_N", "RSSD18_SMBRST_N",
+				"RSSD19_SMBRST_N", "RSSD20_SMBRST_N",
+				"RSSD21_SMBRST_N", "RSSD22_SMBRST_N",
+				"RSSD23_SMBRST_N", "RSSD24_SMBRST_N",
+				/* GPORT1 */
+				"RSSD25_SMBRST_N", "RSSD26_SMBRST_N",
+				"RSSD27_SMBRST_N", "RSSD28_SMBRST_N",
+				"RSSD29_SMBRST_N", "RSSD30_SMBRST_N",
+				"RSSD31_SMBRST_N", "RSSD32_SMBRST_N",
+				/* GPORT2 */
+				"RSSD17_PWRDIS", "RSSD18_PWRDIS",
+				"RSSD19_PWRDIS", "RSSD20_PWRDIS",
+				/* GPORT3 */
+				"RSSD21_PWRDIS", "RSSD22_PWRDIS",
+				"RSSD23_PWRDIS", "RSSD24_PWRDIS",
+				"RSSD25_PWRDIS", "RSSD26_PWRDIS",
+				"RSSD27_PWRDIS", "RSSD28_PWRDIS",
+				/* GPORT4 */
+				"RSSD29_PWRDIS", "RSSD30_PWRDIS",
+				"RSSD31_PWRDIS", "RSSD32_PWRDIS",
+				"RSSD17_RESET_N", "RSSD18_RESET_N",
+				"RSSD19_RESET_N", "RSSD20_RESET_N",
+				/* GPORT5 */
+				"RSSD21_RESET_N", "RSSD22_RESET_N",
+				"RSSD23_RESET_N", "RSSD24_RESET_N",
+				"RSSD25_RESET_N", "RSSD26_RESET_N",
+				"RSSD27_RESET_N", "RSSD28_RESET_N",
+				/* GPORT6 */
+				"RSSD29_RESET_N", "RSSD30_RESET_N",
+				"RSSD31_RESET_N", "RSSD32_RESET_N",
+				"", "",
+				"", "",
+				/* GPORT7 */
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux20: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 4 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@6 {
+					reg = <6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux21: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 5 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@6 {
+					reg = <6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2cmux5: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 0) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux6: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 16 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux7: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux8: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 1 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux9: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 10 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux10: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_rssd_01_16: pinctrl@20 {
+				compatible = "cypress,cy8c9560";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&bmc_pex_irq>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&bmc_pex_irq 18 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <48 12>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"RSSD01_SMBRST_N", "RSSD02_SMBRST_N",
+				"RSSD03_SMBRST_N", "RSSD04_SMBRST_N",
+				"RSSD05_SMBRST_N", "RSSD06_SMBRST_N",
+				"RSSD07_SMBRST_N", "RSSD08_SMBRST_N",
+				/* GPORT1 */
+				"RSSD09_SMBRST_N", "RSSD10_SMBRST_N",
+				"RSSD11_SMBRST_N", "RSSD12_SMBRST_N",
+				"RSSD13_SMBRST_N", "RSSD14_SMBRST_N",
+				"RSSD15_SMBRST_N", "RSSD16_SMBRST_N",
+				/* GPORT2 */
+				"RSSD01_PWRDIS", "RSSD02_PWRDIS",
+				"RSSD03_PWRDIS", "RSSD04_PWRDIS",
+				/* GPORT3 */
+				"RSSD05_PWRDIS", "RSSD06_PWRDIS",
+				"RSSD07_PWRDIS", "RSSD08_PWRDIS",
+				"RSSD09_PWRDIS", "RSSD10_PWRDIS",
+				"RSSD11_PWRDIS", "RSSD12_PWRDIS",
+				/* GPORT4 */
+				"RSSD13_PWRDIS", "RSSD14_PWRDIS",
+				"RSSD15_PWRDIS", "RSSD16_PWRDIS",
+				"RSSD01_RESET_N", "RSSD02_RESET_N",
+				"RSSD03_RESET_N", "RSSD04_RESET_N",
+				/* GPORT5 */
+				"RSSD05_RESET_N", "RSSD06_RESET_N",
+				"RSSD07_RESET_N", "RSSD08_RESET_N",
+				"RSSD09_RESET_N", "RSSD10_RESET_N",
+				"RSSD11_RESET_N", "RSSD12_RESET_N",
+				/* GPORT6 */
+				"RSSD13_RESET_N", "RSSD14_RESET_N",
+				"RSSD15_RESET_N", "RSSD16_RESET_N",
+				"", "",
+				"", "",
+				/* GPORT7 */
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux11: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 12 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@6 {
+					reg = <6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux12: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 14 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@6 {
+					reg = <6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	i2cmux23: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 4) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_bmc_aux>;
+	};
+};
+
+&i2cmux23 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_pex_vr_ctrl: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 2) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 2) GPIO_ACTIVE_HIGH>;
+			gpio-line-names =
+			/* GPORT0 */
+			"BCM0_INPUT_DISABLE_N", "SMB_VR_P3V3_AUX_ALERT_N",
+			"SMB_PEX_CPU1_EVENT_INT", "SMB_PEX_CPU2_EVENT_INT",
+			"DPIC0_VOLTAGE_DETECTB_N", "DPIC0_VOLTAGE_DETECTA_N",
+			"DPIC1_VOLTAGE_DETECTA_N", "DPIC1_VOLTAGE_DETECTB_N",
+			/* GPORT1 */
+			"SMB_PEX_NIC_INT", "SMB_VR_P1V05_PCH_AUX_ALERT_N",
+			"SMB_PEX_CPU0_EVENT_INT", "SMB_PEX_CPU3_EVENT_INT",
+			"LED_ID_TPM", "PLUG_DETECT_TPM",
+			"PLUG_DETECT_M2_SSD_CARRIER1", "RST_M2_SSD1_PERST_N",
+			/* GPORT2 */
+			"LED_ID_BAT", "LED_ID_MGMT_PORT2",
+			"LED_ID_MGMT_PORT1", "SMB_VR_P5V_AUX_ALERT_N",
+			/* GPORT3 */
+			"SMB_VR_AUX_SSB_ALERT_N", "BCM1_INPUT_DISABLE_N",
+			"LED_ID_NIC1_PORT1", "LED_ID_NIC1_PORT2",
+			"LED_ID_NIC2_PORT1", "LED_ID_NIC2_PORT2",
+			"RST_M2_SSD2_PERST_N", "PLUG_DETECT_M2_SSD2",
+			/* GPORT4 */
+			"PLUG_DETECT_BAT", "PLUG_DETECT_M2_SSD1",
+			"M2_SSD1_SSB_ALERT_N", "BCM2_INPUT_DISABLE_N",
+			"SMB_VR_P1V8_PCH_AUX_ALERT_N", "BCM3_INPUT_DISABLE_N",
+			"LED_PWR_DWR_BACK", "LED_ID_DWR_BACK_P",
+			/* GPORT5 */
+			"LED_ID_M2_SSD2", "LED_ID_M2_SSD1",
+			"PLUG_DETECT_M2_SSD_CARRIER2", "M2_SSD2_SSB_ALERT_N";
+
+			pinctrl-0 = <&U62120_input &U62120_input_pullup>;
+			pinctrl-names = "default";
+			U62120_input: input-pins {
+				pins = "gp10";
+				function = "gpio";
+				input-enable;
+				bias-disable;
+			};
+			U62120_input_pullup: input-pullup-pins {
+				pins = "gp01", "gp02", "gp03", "gp11", "gp12", "gp13",
+				"gp23", "gp30", "gp40", "gp42", "gp44", "gp53";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		bmc_pex_irq: pinctrl@20 {
+			compatible = "cypress,cy8c9520";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 1) GPIO_ACTIVE_HIGH>;
+			gpio-line-names =
+			/* GPORT0 */
+			"SMB_MUX_PWM_FANGRP2_RST_INT_N", "SMB_MUX_SSB_FANGRP2_RST_INT_N",
+			"SMB_MUX_PWM_FANGRP1_RST_INT_N", "SMB_MUX_SSB_RSSD01_08_RST_INT_N",
+			"SMB_MUX_RSSD01_08_RST_INT_N", "SMB_MUX_RSSD09_16_RST_INT_N",
+			"SMB_PEX_RSSD01_16_INT", "SMB_MUX_SSB_FANGRP1_RST_INT_N",
+			/* GPORT1 */
+			"SMB_SVC_PEX_FAN_ALERT_INT", "SMB_MUX_SSB_RSSD09_16_RST_INT_N",
+			"SMB_MUX_SSB_RSSD17_24_RST_INT_N", "SMB_MUX_PWM_FANGRP0_RST_INT_N",
+			"SMB_MUX_RSSD17_24_RST_INT_N", "SMB_PEX_RSSD17_32_INT",
+			"SMB_MUX_RSSD25_32_RST_INT_N", "SMB_MUX_SSB_RSSD25_32_RST_INT_N",
+			/* GPORT2 */
+			"SMB_MUX_SSB_FANGRP0_RST_INT_N", "PEX_FAN_ALERT_RST",
+			"PEX_RSSD01_16_RST", "PEX_RSSD17_32_RST";
+			pinctrl-0 = <&U60000_pins>;
+			pinctrl-names = "default";
+			U60000_pins: cfg-pins {
+				pins = "gp06", "gp10", "gp15";
+				function = "gpio";
+				input-enable;
+				bias-disable;
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2cmux24: mux@70 {
+			compatible = "maxim,max7357";
+			reg = <0x70>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vdd-supply = <&p3v3_bmc_aux>;
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		eeprom@51 {
+			compatible = "atmel,24c32";
+			reg = <0x51>;
+			pagesize = <32>;
+			vcc-supply = <&p3v3_bmc_aux>;
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2cmux25: mux@70 {
+			compatible = "maxim,max7357";
+			reg = <0x70>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2cmux25 {
+	reset-gpios = <&gpio0 ASPEED_GPIO(R, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+	vdd-supply = <&p3v3_bmc_aux>;
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		p5v_aux: ir38263-p5v-aux@40 {
+			compatible = "infineon,ir38263";
+			reg = <0x40>;
+
+			regulator-name = "p5v_aux";
+			regulator-enable-ramp-delay = <2000>;
+			vin-supply = <&p12v>;
+			vbus-supply = <&p3v3_bmc_aux>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		p3v3_aux: ir38263-p3v3-aux@40 {
+			compatible = "infineon,ir38263";
+			reg = <0x40>;
+
+			vin-supply = <&p12v>;
+			regulator-name = "p3v3_aux";
+			/*
+			 * 2msec for regulator + 18msec for board capacitance
+			 * Note: Every IC has a PTC which slowly charges the bypass
+			 * cap.
+			 */
+			regulator-enable-ramp-delay = <200000>;
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		aux_ssb: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_pex_vr_ctrl>;
+			interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+			vss1-supply = <&p5v_aux>;
+			vss2-supply = <&p3v3_aux>;
+			regulators {
+				p5v: sw0 {
+					regulator-name = "p5v";
+					shunt-resistor-micro-ohms = <12000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <100000>;
+				};
+				p3v3_pch: sw1 {
+					regulator-name = "p3v3_pch";
+					shunt-resistor-micro-ohms = <12000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <100000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pli1209bc_p12v_a: regulator@5f {
+			compatible = "vicor,pli1209bc";
+			reg = <0x5f>;
+			regulators {
+				p12v_a: vout2 {
+					regulator-name = "bcm0";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pli1209bc_p12v_b: regulator@5f {
+			compatible = "vicor,pli1209bc";
+			reg = <0x5f>;
+			regulators {
+				p12v_b: vout2 {
+					regulator-name = "bcm1";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pli1209bc_p12v_c: regulator@5f {
+			compatible = "vicor,pli1209bc";
+			reg = <0x5f>;
+			regulators {
+				p12v_c: vout2 {
+					regulator-name = "bcm2";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pli1209bc_p12v_d: regulator@5f {
+			compatible = "vicor,pli1209bc";
+			reg = <0x5f>;
+			regulators {
+				p12v_d: vout2 {
+					regulator-name = "bcm3";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux24 {
+
+	reset-gpios = <&gpio0 ASPEED_GPIO(P, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+	i2c@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		smb_svc_pex_rssd01_16: pinctrl@20 {
+			compatible = "cypress,cy8c9560";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&smb_svc_pex_cpu0_led 17 GPIO_ACTIVE_HIGH>;
+			gpio-line-names =
+			/* GPORT0 */
+			"LED_ID_RSSD01", "LED_ID_RSSD02",
+			"LED_ID_RSSD03", "LED_ID_RSSD04",
+			"LED_ID_RSSD05", "LED_ID_RSSD06",
+			"LED_ID_RSSD07", "LED_ID_RSSD08",
+			/* GPORT1 */
+			"LED_ID_RSSD09", "LED_ID_RSSD10",
+			"LED_ID_RSSD11", "LED_ID_RSSD12",
+			"LED_ID_RSSD13", "LED_ID_RSSD14",
+			"LED_ID_RSSD15", "LED_ID_RSSD16",
+			/* GPORT2 */
+			"RSSD01_PRESENT_N", "RSSD02_PRESENT_N",
+			"RSSD03_PRESENT_N", "RSSD04_PRESENT_N",
+			/* GPORT3 */
+			"RSSD05_PRESENT_N", "RSSD06_PRESENT_N",
+			"RSSD07_PRESENT_N", "RSSD08_PRESENT_N",
+			"RSSD09_PRESENT_N", "RSSD10_PRESENT_N",
+			"RSSD11_PRESENT_N", "RSSD12_PRESENT_N",
+			/* GPORT4 */
+			"RSSD13_PRESENT_N", "RSSD14_PRESENT_N",
+			"RSSD15_PRESENT_N", "RSSD16_PRESENT_N",
+			"LED_ID_FAN_ASM01", "LED_ID_FAN_ASM02",
+			"LED_ID_FAN_ASM03", "LED_ID_FAN_ASM04",
+			/* GPORT5 */
+			"LED_ID_FAN_ASM05", "LED_ID_FAN_ASM06",
+			"PLUG_DETECT_FAN_ASM01", "PLUG_DETECT_FAN_ASM02",
+			"PLUG_DETECT_FAN_ASM03", "PLUG_DETECT_FAN_ASM04",
+			"PLUG_DETECT_FAN_ASM05", "PLUG_DETECT_FAN_ASM06",
+			/* GPORT6 */
+			"SSB_RSSD01_ALERT_N", "SSB_RSSD02_ALERT_N",
+			"SSB_RSSD03_ALERT_N", "SSB_RSSD04_ALERT_N",
+			"SSB_RSSD05_ALERT_N", "SSB_RSSD06_ALERT_N",
+			"SSB_RSSD07_ALERT_N", "SSB_RSSD08_ALERT_N",
+			/* GPORT7 */
+			"SSB_RSSD09_ALERT_N", "SSB_RSSD10_ALERT_N",
+			"SSB_RSSD11_ALERT_N", "SSB_RSSD12_ALERT_N",
+			"SSB_RSSD13_ALERT_N", "SSB_RSSD14_ALERT_N",
+			"SSB_RSSD15_ALERT_N", "SSB_RSSD16_ALERT_N";
+			pinctrl-0 = <&U65200_pins>;
+			pinctrl-names = "default";
+			U65200_pins: cfg-pins {
+				pins = "gp60", "gp61", "gp62", "gp63", "gp64",
+				       "gp65", "gp66", "gp67", "gp70", "gp71",
+				       "gp72", "gp73", "gp74", "gp75", "gp76",
+				       "gp77";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_rssd17_32: pinctrl@20 {
+			compatible = "cypress,cy8c9560";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(H, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&smb_svc_pex_cpu1_led 17 GPIO_ACTIVE_HIGH>;
+			gpio-line-names =
+			/* GPORT0 */
+			"LED_ID_RSSD17", "LED_ID_RSSD18",
+			"LED_ID_RSSD19", "LED_ID_RSSD20",
+			"LED_ID_RSSD21", "LED_ID_RSSD22",
+			"LED_ID_RSSD23", "LED_ID_RSSD24",
+			/* GPORT1 */
+			"LED_ID_RSSD25", "LED_ID_RSSD26",
+			"LED_ID_RSSD27", "LED_ID_RSSD28",
+			"LED_ID_RSSD29", "LED_ID_RSSD30",
+			"LED_ID_RSSD31", "LED_ID_RSSD32",
+			/* GPORT2 */
+			"RSSD17_PRESENT_N", "RSSD18_PRESENT_N",
+			"RSSD19_PRESENT_N", "RSSD20_PRESENT_N",
+			/* GPORT3 */
+			"RSSD21_PRESENT_N", "RSSD22_PRESENT_N",
+			"RSSD23_PRESENT_N", "RSSD24_PRESENT_N",
+			"RSSD25_PRESENT_N", "RSSD26_PRESENT_N",
+			"RSSD27_PRESENT_N", "RSSD28_PRESENT_N",
+			/* GPORT4 */
+			"RSSD29_PRESENT_N", "RSSD30_PRESENT_N",
+			"RSSD31_PRESENT_N", "RSSD32_PRESENT_N",
+			"LED_ID_FAN_ASM07", "LED_ID_FAN_ASM08",
+			"LED_ID_FAN_ASM09", "LED_ID_FAN_ASM10",
+			/* GPORT5 */
+			"LED_ID_FAN_ASM11", "LED_ID_FAN_ASM12",
+			"PLUG_DETECT_FAN_ASM07", "PLUG_DETECT_FAN_ASM08",
+			"PLUG_DETECT_FAN_ASM09", "PLUG_DETECT_FAN_ASM10",
+			"PLUG_DETECT_FAN_ASM11", "PLUG_DETECT_FAN_ASM12",
+			/* GPORT6 */
+			"SSB_RSSD17_ALERT_N", "SSB_RSSD18_ALERT_N",
+			"SSB_RSSD19_ALERT_N", "SSB_RSSD20_ALERT_N",
+			"SSB_RSSD21_ALERT_N", "SSB_RSSD22_ALERT_N",
+			"SSB_RSSD23_ALERT_N", "SSB_RSSD24_ALERT_N",
+			/* GPORT7 */
+			"SSB_RSSD25_ALERT_N", "SSB_RSSD26_ALERT_N",
+			"SSB_RSSD27_ALERT_N", "SSB_RSSD28_ALERT_N",
+			"SSB_RSSD29_ALERT_N", "SSB_RSSD30_ALERT_N",
+			"SSB_RSSD31_ALERT_N", "SSB_RSSD32_ALERT_N";
+			pinctrl-0 = <&U65300_pins>;
+			pinctrl-names = "default";
+			U65300_pins: cfg-pins {
+				pins = "gp60", "gp61", "gp62",
+				"gp63", "gp64", "gp65", "gp66",
+				"gp67", "gp70", "gp71", "gp72",
+				"gp73", "gp74", "gp75", "gp76",
+				"gp77";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_cpu1_led: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 6) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 5) GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <18 2>, <36 2>;
+			gpio-line-names =
+			/* GPORT0 */
+			"PLUG_DETECT_DIMM_C1E2", "PLUG_DETECT_DIMM_C1E1",
+			"PLUG_DETECT_DIMM_C1F2", "PLUG_DETECT_DIMM_C1F1",
+			"PLUG_DETECT_DIMM_C1G2", "PLUG_DETECT_DIMM_C1G1",
+			"PLUG_DETECT_DIMM_C1H2", "PLUG_DETECT_DIMM_C1H1",
+			/* GPORT1 */
+			"PLUG_DETECT_DIMM_C1D1", "PLUG_DETECT_DIMM_C1D2",
+			"PLUG_DETECT_DIMM_C1C1", "PLUG_DETECT_DIMM_C1C2",
+			"PLUG_DETECT_DIMM_C1B1", "PLUG_DETECT_DIMM_C1B2",
+			"PLUG_DETECT_DIMM_C1A1", "PLUG_DETECT_DIMM_C1A2",
+			/* GPORT2 */
+			"PEX_CPU1_EVENT_RST", "SVC_PEX_RSSD17_32_RST",
+			"", "",
+			/* GPORT3 */
+			"LED_ID_DIMM_C1E2", "LED_ID_DIMM_C1E1",
+			"LED_ID_DIMM_C1F2", "LED_ID_DIMM_C1F1",
+			"LED_ID_DIMM_C1G2", "LED_ID_DIMM_C1G1",
+			"LED_ID_DIMM_C1H2", "LED_ID_DIMM_C1H1",
+			/* GPORT4 */
+			"LED_ID_DIMM_C1A2", "LED_ID_DIMM_C1A1",
+			"LED_ID_DIMM_C1B2", "LED_ID_DIMM_C1B1",
+			"LED_ID_DIMM_C1C2", "LED_ID_DIMM_C1C1",
+			"LED_ID_DIMM_C1D2", "LED_ID_DIMM_C1D1",
+			/* GPORT5 */
+			"", "",
+			"FM_CPU1_SKTOCC_N", "LED_ID_CPU1";
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_fan_alert: pinctrl@20 {
+			compatible = "cypress,cy8c9560";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&bmc_pex_irq>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_aux>;
+			reset-gpios = <&bmc_pex_irq 17 GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <24 3>, <51 9>;
+			gpio-line-names =
+			/* GPORT0 */
+			"FAN01_SSB_ALERT_N", "FAN02_SSB_ALERT_N",
+			"FAN03_SSB_ALERT_N", "FAN04_SSB_ALERT_N",
+			"FAN05_SSB_ALERT_N", "FAN06_SSB_ALERT_N",
+			"FAN07_SSB_ALERT_N", "FAN08_SSB_ALERT_N",
+			/* GPORT1 */
+			"FAN09_SSB_ALERT_N", "FAN10_SSB_ALERT_N",
+			"FAN11_SSB_ALERT_N", "FAN12_SSB_ALERT_N",
+			"FAN13_SSB_ALERT_N", "FAN14_SSB_ALERT_N",
+			"FAN15_SSB_ALERT_N", "FAN16_SSB_ALERT_N",
+			/* GPORT2 */
+			"FAN17_SSB_ALERT_N", "FAN18_SSB_ALERT_N",
+			"FAN19_SSB_ALERT_N", "FAN20_SSB_ALERT_N",
+			/* GPORT3 */
+			"FAN21_SSB_ALERT_N", "FAN22_SSB_ALERT_N",
+			"FAN23_SSB_ALERT_N", "FAN24_SSB_ALERT_N",
+			"", "",
+			"", "FAN01_PWM_ALERT_N",
+			/* GPORT4 */
+			"FAN02_PWM_ALERT_N", "FAN03_PWM_ALERT_N",
+			"FAN04_PWM_ALERT_N", "FAN05_PWM_ALERT_N",
+			"FAN06_PWM_ALERT_N", "FAN07_PWM_ALERT_N",
+			"FAN08_PWM_ALERT_N", "FAN09_PWM_ALERT_N",
+			/* GPORT5 */
+			"FAN10_PWM_ALERT_N", "FAN11_PWM_ALERT_N",
+			"FAN12_PWM_ALERT_N", "FAN13_PWM_ALERT_N",
+			"FAN14_PWM_ALERT_N", "FAN15_PWM_ALERT_N",
+			"FAN16_PWM_ALERT_N", "FAN17_PWM_ALERT_N",
+			/* GPORT6 */
+			"FAN18_PWM_ALERT_N", "FAN19_PWM_ALERT_N",
+			"FAN20_PWM_ALERT_N", "FAN21_PWM_ALERT_N",
+			"FAN22_PWM_ALERT_N", "FAN23_PWM_ALERT_N",
+			"FAN24_PWM_ALERT_N", "",
+			/* GPORT7 */
+			"", "",
+			"", "",
+			"", "",
+			"", "";
+			pinctrl-0 = <&U65600_pins>;
+			pinctrl-names = "default";
+			U65600_pins: cfg-pins {
+				pins = "gp00", "gp01", "gp02",
+				"gp03", "gp04", "gp05", "gp06",
+				"gp07", "gp10", "gp11", "gp12",
+				"gp13", "gp14", "gp15", "gp16",
+				"gp17", "gp20", "gp21", "gp22",
+				"gp23", "gp30", "gp31", "gp32",
+				"gp33", "gp37", "gp40", "gp41",
+				"gp42", "gp43", "gp44", "gp45",
+				"gp46", "gp47", "gp50", "gp51",
+				"gp52", "gp53", "gp54", "gp55",
+				"gp56", "gp57", "gp60", "gp61",
+				"gp62", "gp63", "gp64", "gp65",
+				"gp66";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_cpu2_led: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 5) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <17 3>, <36 2>;
+			gpio-line-names =
+			/* GPORT0 */
+			"PLUG_DETECT_DIMM_C2E2", "PLUG_DETECT_DIMM_C2E1",
+			"PLUG_DETECT_DIMM_C2F2", "PLUG_DETECT_DIMM_C2F1",
+			"PLUG_DETECT_DIMM_C2G2", "PLUG_DETECT_DIMM_C2G1",
+			"PLUG_DETECT_DIMM_C2H2", "PLUG_DETECT_DIMM_C2H1",
+			/* GPORT1 */
+			"PLUG_DETECT_DIMM_C2D1", "PLUG_DETECT_DIMM_C2D2",
+			"PLUG_DETECT_DIMM_C2C1", "PLUG_DETECT_DIMM_C2C2",
+			"PLUG_DETECT_DIMM_C2B1", "PLUG_DETECT_DIMM_C2B2",
+			"PLUG_DETECT_DIMM_C2A1", "PLUG_DETECT_DIMM_C2A2",
+			/* GPORT2 */
+			"PEX_CPU2_EVENT_RST", "",
+			"", "",
+			/* GPORT3 */
+			"LED_ID_DIMM_C2E2", "LED_ID_DIMM_C2E1",
+			"LED_ID_DIMM_C2F2", "LED_ID_DIMM_C2F1",
+			"LED_ID_DIMM_C2G2", "LED_ID_DIMM_C2G1",
+			"LED_ID_DIMM_C2H2", "LED_ID_DIMM_C2H1",
+			/* GPORT4 */
+			"LED_ID_DIMM_C2A2", "LED_ID_DIMM_C2A1",
+			"LED_ID_DIMM_C2B2", "LED_ID_DIMM_C2B1",
+			"LED_ID_DIMM_C2C2", "LED_ID_DIMM_C2C1",
+			"LED_ID_DIMM_C2D2", "LED_ID_DIMM_C2D1",
+			/* GPORT5 */
+			"", "",
+			"FM_CPU2_SKTOCC_N", "LED_ID_CPU2";
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		smb_svc_pex_cpu3_led: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 3) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <17 3>;
+			gpio-line-names =
+			/* GPORT0 */
+			"PLUG_DETECT_DIMM_C3E2", "PLUG_DETECT_DIMM_C3E1",
+			"PLUG_DETECT_DIMM_C3F2", "PLUG_DETECT_DIMM_C3F1",
+			"PLUG_DETECT_DIMM_C3G2", "PLUG_DETECT_DIMM_C3G1",
+			"PLUG_DETECT_DIMM_C3H2", "PLUG_DETECT_DIMM_C3H1",
+			/* GPORT1 */
+			"PLUG_DETECT_DIMM_C3D1", "PLUG_DETECT_DIMM_C3D2",
+			"PLUG_DETECT_DIMM_C3C1", "PLUG_DETECT_DIMM_C3C2",
+			"PLUG_DETECT_DIMM_C3B1", "PLUG_DETECT_DIMM_C3B2",
+			"PLUG_DETECT_DIMM_C3A1", "PLUG_DETECT_DIMM_C3A2",
+			/* GPORT2 */
+			"PEX_CPU3_EVENT_RST", "",
+			"", "",
+			/* GPORT3 */
+			"LED_ID_DIMM_C3E2", "LED_ID_DIMM_C3E1",
+			"LED_ID_DIMM_C3F2", "LED_ID_DIMM_C3F1",
+			"LED_ID_DIMM_C3G2", "LED_ID_DIMM_C3G1",
+			"LED_ID_DIMM_C3H2", "LED_ID_DIMM_C3H1",
+			/* GPORT4 */
+			"LED_ID_DIMM_C3A2", "LED_ID_DIMM_C3A1",
+			"LED_ID_DIMM_C3B2", "LED_ID_DIMM_C3B1",
+			"LED_ID_DIMM_C3C2", "LED_ID_DIMM_C3C1",
+			"LED_ID_DIMM_C3D2", "LED_ID_DIMM_C3D1",
+			/* GPORT5 */
+			"LED_PWR_DWR_FRNT", "LED_ID_DWR_FRNT_P",
+			"FM_CPU3_SKTOCC_N", "LED_ID_CPU3";
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_cpu0_led: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(O, 3) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <18 2>, <36 2>;
+			gpio-line-names =
+			/* GPORT0 */
+			"PLUG_DETECT_DIMM_C0E2", "PLUG_DETECT_DIMM_C0E1",
+			"PLUG_DETECT_DIMM_C0F2", "PLUG_DETECT_DIMM_C0F1",
+			"PLUG_DETECT_DIMM_C0G2", "PLUG_DETECT_DIMM_C0G1",
+			"PLUG_DETECT_DIMM_C0H2", "PLUG_DETECT_DIMM_C0H1",
+			/* GPORT1 */
+			"PLUG_DETECT_DIMM_C0D1", "PLUG_DETECT_DIMM_C0D2",
+			"PLUG_DETECT_DIMM_C0C1", "PLUG_DETECT_DIMM_C0C2",
+			"PLUG_DETECT_DIMM_C0B1", "PLUG_DETECT_DIMM_C0B2",
+			"PLUG_DETECT_DIMM_C0A1", "PLUG_DETECT_DIMM_C0A2",
+			/* GPORT2 */
+			"PEX_CPU0_EVENT_RST", "SVC_PEX_RSSD01_16_RST",
+			"", "",
+			/* GPORT3 */
+			"LED_ID_DIMM_C0E2", "LED_ID_DIMM_C0E1",
+			"LED_ID_DIMM_C0F2", "LED_ID_DIMM_C0F1",
+			"LED_ID_DIMM_C0G2", "LED_ID_DIMM_C0G1",
+			"LED_ID_DIMM_C0H2", "LED_ID_DIMM_C0H1",
+			/* GPORT4 */
+			"LED_ID_DIMM_C0A2", "LED_ID_DIMM_C0A1",
+			"LED_ID_DIMM_C0B2", "LED_ID_DIMM_C0B1",
+			"LED_ID_DIMM_C0C2", "LED_ID_DIMM_C0C1",
+			"LED_ID_DIMM_C0D2", "LED_ID_DIMM_C0D1",
+			/* GPORT5 */
+			"", "",
+			"FM_CPU0_SKTOCC_N", "LED_ID_CPU0";
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	p1v2_bmc_aux_mon: pmic@60 {
+		compatible = "maxim,max8952";
+		reg = <0x60>;
+		max8952,default-mode = <3>;
+		max8952,dvs-mode-microvolt = <1100000>, <1100000>,
+					     <1100000>, <1100000>;
+		max8952,sync-freq = <0>;
+		max8952,ramp-speed = <0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&i2cmux8 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan10_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan10_ssb: sw0 {
+					regulator-name = "fan10_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan12_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan12_ssb: sw0 {
+					regulator-name = "fan12_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan14_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan14_ssb: sw0 {
+					regulator-name = "fan14_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan16_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan16_ssb: sw0 {
+					regulator-name = "fan16_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan18_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan18_ssb: sw0 {
+					regulator-name = "fan18_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan20_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan20_ssb: sw0 {
+					regulator-name = "fan20_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan22_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan22_ssb: sw0 {
+					regulator-name = "fan22_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan24_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan24_ssb: sw0 {
+					regulator-name = "fan24_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux7 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan17_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan17_ssb: sw0 {
+					regulator-name = "fan17_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan19_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan19_ssb: sw0 {
+					regulator-name = "fan19_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan21_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan21_ssb: sw0 {
+					regulator-name = "fan21_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan23_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan23_ssb: sw0 {
+					regulator-name = "fan23_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan02_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan02_ssb: sw0 {
+					regulator-name = "fan02_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan04_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan04_ssb: sw0 {
+					regulator-name = "fan04_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan06_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan06_ssb: sw0 {
+					regulator-name = "fan06_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan08_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan08_ssb: sw0 {
+					regulator-name = "fan08_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux6 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan01_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan01_ssb: sw0 {
+					regulator-name = "fan01_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan03_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan03_ssb: sw0 {
+					regulator-name = "fan03_supply";
+
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan05_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan05_ssb: sw0 {
+					regulator-name = "fan05_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan07_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan07_ssb: sw0 {
+					regulator-name = "fan07_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan09_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan09_ssb: sw0 {
+					regulator-name = "fan09_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan11_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan11_ssb: sw0 {
+					regulator-name = "fan11_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan13_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan13_ssb: sw0 {
+					regulator-name = "fan13_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan15_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan15_ssb: sw0 {
+					regulator-name = "fan15_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+
+	};
+};
+
+&i2cmux9 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd19: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <46 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd19:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd19: sw0 {
+					regulator-name = "rssd19_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd19: sw1 {
+					regulator-name = "rssd19_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd18: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd18:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd18: sw0 {
+					regulator-name = "rssd18_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd18: sw1 {
+					regulator-name = "rssd18_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd17: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd17:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd17: sw0 {
+					regulator-name = "rssd17_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd17: sw1 {
+					regulator-name = "rssd17_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd20: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <47 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd20:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd20: sw0 {
+					regulator-name = "rssd20_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd20: sw1 {
+					regulator-name = "rssd20_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd21: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <48 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd21:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd21: sw0 {
+					regulator-name = "rssd21_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd21: sw1 {
+					regulator-name = "rssd21_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd22: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <49 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd22:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd22: sw0 {
+					regulator-name = "rssd22_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd22: sw1 {
+					regulator-name = "rssd22_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd24: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <51 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd24:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd24: sw0 {
+					regulator-name = "rssd24_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd24: sw1 {
+					regulator-name = "rssd24_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd23: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <50 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd23:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd23: sw0 {
+					regulator-name = "rssd23_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd23: sw1 {
+					regulator-name = "rssd23_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux10 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd25: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <52 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd25:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd25: sw0 {
+					regulator-name = "rssd25_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd25: sw1 {
+					regulator-name = "rssd25_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd26: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <53 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd26:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd26: sw0 {
+					regulator-name = "rssd26_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd26: sw1 {
+					regulator-name = "rssd26_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd27: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <54 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd27:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd27: sw0 {
+					regulator-name = "rssd27_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd27: sw1 {
+					regulator-name = "rssd27_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd32: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <59 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd32:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd32: sw0 {
+					regulator-name = "rssd32_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd32: sw1 {
+					regulator-name = "rssd32_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd31: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <58 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd31:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd31: sw0 {
+					regulator-name = "rssd31_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd31: sw1 {
+					regulator-name = "rssd31_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd30: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <57 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd30:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd30: sw0 {
+					regulator-name = "rssd30_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd30: sw1 {
+					regulator-name = "rssd30_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd29: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd29:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd29: sw0 {
+					regulator-name = "rssd29_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd29: sw1 {
+					regulator-name = "rssd29_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd28: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd28:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd28: sw0 {
+					regulator-name = "rssd28_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd28: sw1 {
+					regulator-name = "rssd28_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux18 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd03: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <46 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd03:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd03: sw0 {
+					regulator-name = "rssd03_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd03: sw1 {
+					regulator-name = "rssd03_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd02: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd02:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd02: sw0 {
+					regulator-name = "rssd02_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd02: sw1 {
+					regulator-name = "rssd02_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd01: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd01:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd01: sw0 {
+					regulator-name = "rssd01_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd01: sw1 {
+					regulator-name = "rssd01_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd04: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <47 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd04:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd04: sw0 {
+					regulator-name = "rssd04_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd04: sw1 {
+					regulator-name = "rssd04_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd05: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <48 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd05:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd05: sw0 {
+					regulator-name = "rssd05_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd05: sw1 {
+					regulator-name = "rssd05_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd08: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <51 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd08:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd08: sw0 {
+					regulator-name = "rssd08_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd08: sw1 {
+					regulator-name = "rssd08_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd07: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <50 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd07:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd07: sw0 {
+					regulator-name = "rssd07_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd07: sw1 {
+					regulator-name = "rssd07_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd06: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <49 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd06:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd06: sw0 {
+					regulator-name = "rssd06_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd06: sw1 {
+					regulator-name = "rssd06_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux19 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd14: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <57 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd14:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd14: sw0 {
+					regulator-name = "rssd14_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd14: sw1 {
+					regulator-name = "rssd14_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd13: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd13:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd13: sw0 {
+					regulator-name = "rssd13_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd13: sw1 {
+					regulator-name = "rssd13_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd12: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd12:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd12: sw0 {
+					regulator-name = "rssd12_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd12: sw1 {
+					regulator-name = "rssd12_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd11: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <54 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd11:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd11: sw0 {
+					regulator-name = "rssd11_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd11: sw1 {
+					regulator-name = "rssd11_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd10: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <53 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd10:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd10: sw0 {
+					regulator-name = "rssd10_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd10: sw1 {
+					regulator-name = "rssd10_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd09: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <52 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd09:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd09: sw0 {
+					regulator-name = "rssd09_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd09: sw1 {
+					regulator-name = "rssd09_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd15: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <58 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd15:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd15: sw0 {
+					regulator-name = "rssd15_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd15: sw1 {
+					regulator-name = "rssd15_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd16: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <59 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd16:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd16: sw0 {
+					regulator-name = "rssd16_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd16: sw1 {
+					regulator-name = "rssd16_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
new file mode 100644
index 000000000000..c8267c97a44e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
@@ -0,0 +1,1671 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "System1";
+	compatible = "ibm,system1-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c16 = &i2c8mux1chn0;
+		i2c17 = &i2c8mux1chn1;
+		i2c18 = &i2c8mux1chn2;
+		i2c19 = &i2c8mux1chn3;
+		i2c20 = &i2c8mux1chn4;
+		i2c21 = &i2c8mux1chn5;
+		i2c22 = &i2c8mux1chn6;
+		i2c23 = &i2c8mux1chn7;
+		i2c24 = &i2c3mux0chn0;
+		i2c25 = &i2c3mux0chn1;
+		i2c26 = &i2c3mux0chn2;
+		i2c27 = &i2c3mux0chn3;
+		i2c28 = &i2c3mux0chn4;
+		i2c29 = &i2c3mux0chn5;
+		i2c30 = &i2c3mux0chn6;
+		i2c31 = &i2c3mux0chn7;
+		i2c32 = &i2c6mux0chn0;
+		i2c33 = &i2c6mux0chn1;
+		i2c34 = &i2c6mux0chn2;
+		i2c35 = &i2c6mux0chn3;
+		i2c36 = &i2c6mux0chn4;
+		i2c37 = &i2c6mux0chn5;
+		i2c38 = &i2c6mux0chn6;
+		i2c39 = &i2c6mux0chn7;
+		i2c40 = &i2c7mux0chn0;
+		i2c41 = &i2c7mux0chn1;
+		i2c42 = &i2c7mux0chn2;
+		i2c43 = &i2c7mux0chn3;
+		i2c44 = &i2c7mux0chn4;
+		i2c45 = &i2c7mux0chn5;
+		i2c46 = &i2c7mux0chn6;
+		i2c47 = &i2c7mux0chn7;
+		i2c48 = &i2c8mux0chn0;
+		i2c49 = &i2c8mux0chn1;
+		i2c50 = &i2c8mux0chn2;
+		i2c51 = &i2c8mux0chn3;
+		i2c52 = &i2c8mux0chn4;
+		i2c53 = &i2c8mux0chn5;
+		i2c54 = &i2c8mux0chn6;
+		i2c55 = &i2c8mux0chn7;
+		i2c56 = &i2c14mux0chn0;
+		i2c57 = &i2c14mux0chn1;
+		i2c58 = &i2c14mux0chn2;
+		i2c59 = &i2c14mux0chn3;
+		i2c60 = &i2c14mux0chn4;
+		i2c61 = &i2c14mux0chn5;
+		i2c62 = &i2c14mux0chn6;
+		i2c63 = &i2c14mux0chn7;
+		i2c64 = &i2c15mux0chn0;
+		i2c65 = &i2c15mux0chn1;
+		i2c66 = &i2c15mux0chn2;
+		i2c67 = &i2c15mux0chn3;
+		i2c68 = &i2c15mux0chn4;
+		i2c69 = &i2c15mux0chn5;
+		i2c70 = &i2c15mux0chn6;
+		i2c71 = &i2c15mux0chn7;
+	};
+
+	chosen {
+		stdout-path = "uart5:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		eventlog: tcg-event-log@b3d00000 {
+			no-map;
+			reg = <0xb3d00000 0x100000>;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-bmc-ready {
+			gpios = <&gpio0 ASPEED_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bmc-hb {
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-fan0-fault {
+			gpios = <&pca3 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan1-fault {
+			gpios = <&pca3 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan2-fault {
+			gpios = <&pca3 7 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan3-fault {
+			gpios = <&pca3 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan4-fault {
+			gpios = <&pca3 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan5-fault {
+			gpios = <&pca3 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan6-fault {
+			gpios = <&pca3 11 GPIO_ACTIVE_LOW>;
+		};
+
+		led-nvmed0-fault {
+			gpios = <&pca4 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-nvmed1-fault {
+			gpios = <&pca4 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-nvmed2-fault {
+			gpios = <&pca4 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-nvmed3-fault {
+			gpios = <&pca4 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-nvme0-presence {
+			label = "nvme0-presence";
+			gpios = <&pca4 0 GPIO_ACTIVE_LOW>;
+			linux,code = <0>;
+		};
+
+		event-nvme1-presence {
+			label = "nvme1-presence";
+			gpios = <&pca4 1 GPIO_ACTIVE_LOW>;
+			linux,code = <1>;
+		};
+
+		event-nvme2-presence {
+			label = "nvme2-presence";
+			gpios = <&pca4 2 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		event-nvme3-presence {
+			label = "nvme3-presence";
+			gpios = <&pca4 3 GPIO_ACTIVE_LOW>;
+			linux,code = <3>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&p12v_vd 0>, <&p5v_aux_vd 0>,
+			<&p5v_bmc_aux_vd 0>, <&p3v3_aux_vd 0>,
+			<&p3v3_bmc_aux_vd 0>, <&p1v8_bmc_aux_vd 0>,
+			<&adc1 4>, <&adc0 2>, <&adc1 0>,
+			<&p2v5_aux_vd 0>, <&adc1 7>;
+	};
+
+	p12v_vd: voltage-divider1 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 3>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1127/127 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <15>;
+		full-ohms = <133>;
+	};
+
+	p5v_aux_vd: voltage-divider2 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 5>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1365/365 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <50>;
+		full-ohms = <187>;
+	};
+
+	p5v_bmc_aux_vd: voltage-divider3 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 3>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1365/365 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <50>;
+		full-ohms = <187>;
+	};
+
+	p3v3_aux_vd: voltage-divider4 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 2>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1698/698 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <14>;
+		full-ohms = <34>;
+	};
+
+	p3v3_bmc_aux_vd: voltage-divider5 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 7>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1698/698 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <14>;
+		full-ohms = <34>;
+	};
+
+	p1v8_bmc_aux_vd: voltage-divider6 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 6>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 4000/3000 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <3>;
+		full-ohms = <4>;
+	};
+
+	p2v5_aux_vd: voltage-divider7 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 1>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 2100/1100 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <11>;
+		full-ohms = <21>;
+	};
+
+	p1v8_bmc_aux: fixedregulator-p1v8-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8_bmc_aux";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&adc0 {
+	status = "okay";
+	vref-supply = <&p1v8_bmc_aux>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+	vref-supply = <&p1v8_bmc_aux>;
+	aspeed,battery-sensing;
+
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default
+		&pinctrl_adc9_default
+		&pinctrl_adc10_default
+		&pinctrl_adc11_default
+		&pinctrl_adc12_default
+		&pinctrl_adc13_default
+		&pinctrl_adc14_default
+		&pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl_gpiol4_unbiased: gpiol4 {
+		pins = "C15";
+		bias-disable;
+	};
+
+	pinctrl_gpiol5_unbiased: gpiol5 {
+		pins = "F15";
+		bias-disable;
+	};
+
+	pinctrl_gpiol6_unbiased: gpiol6 {
+		pins = "B14";
+		bias-disable;
+	};
+
+	pinctrl_gpiol7_unbiased: gpiol7 {
+		pins = "C14";
+		bias-disable;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpiol4_unbiased
+		&pinctrl_gpiol5_unbiased
+		&pinctrl_gpiol6_unbiased
+		&pinctrl_gpiol7_unbiased>;
+
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","bmc-tpm-reset","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","led-bmc-ready",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"pch-reset","","","","","flash-write-override","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","led-bmc-hb",
+	/*Q0-Q7*/	"","","","","","","pch-ready","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","led-rear-enc-fault0","led-rear-enc-id0",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","rtc-battery-voltage-read-enable","","power-chassis-control","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"fpga-pgood","power-chassis-good","pch-pgood","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+
+	pin-gpio-hog-0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "RST_RTCRST_N";
+	};
+
+	pin-gpio-hog-1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "RST_SRTCRST_N";
+	};
+
+	pin-gpio-hog-2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_FAN_E3_SVC_PEX_INT_N";
+	};
+
+	pin-gpio-hog-3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 6) GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "isolate_errs_cpu1";
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <500000>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	regulator@42 {
+		compatible = "infineon,ir38263";
+		reg = <0x42>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nic1-perst";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "bmc-perst";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "reset-M2-SSD1-2-perst";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "pcie-perst1";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcie-perst2";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "pcie-perst3";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "pcie-perst4";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "pcie-perst5";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "pcie-perst6";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcie-perst7";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcie-perst8";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "PV-cp0-sw1stk4-perst";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "PV-cp0-sw1stk5-perst";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "pe-cp-drv0-perst";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "pe-cp-drv1-perst";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "lom-perst";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	gpio@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"PLUG_DETECT_PCIE_J101_N",
+			"PLUG_DETECT_PCIE_J102_N",
+			"PLUG_DETECT_PCIE_J103_N",
+			"PLUG_DETECT_PCIE_J104_N",
+			"PLUG_DETECT_PCIE_J105_N",
+			"PLUG_DETECT_PCIE_J106_N",
+			"PLUG_DETECT_PCIE_J107_N",
+			"PLUG_DETECT_PCIE_J108_N",
+			"PLUG_DETECT_M2_SSD1_N",
+			"PLUG_DETECT_NIC1_N",
+			"SEL_SMB_DIMM_CPU0",
+			"presence-ps2",
+			"presence-ps3",
+			"", "",
+			"PWRBRD_PLUG_DETECT2_N";
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	power-supply@58 {
+		compatible = "intel,crps185";
+		reg = <0x58>;
+	};
+
+	power-supply@59 {
+		compatible = "intel,crps185";
+		reg = <0x59>;
+	};
+
+	power-supply@5a {
+		compatible = "intel,crps185";
+		reg = <0x5a>;
+	};
+
+	power-supply@5b {
+		compatible = "intel,crps185";
+		reg = <0x5b>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c3mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c3mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c3mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c3mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c3mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c3mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c3mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c3mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	multi-master;
+	bus-frequency = <1000000>;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	regulator@42 {
+		compatible = "infineon,ir38263";
+		reg = <0x42>;
+	};
+
+	regulator@43 {
+		compatible = "infineon,ir38060";
+		reg = <0x43>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	fan-controller@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+	};
+
+	fan-controller@54 {
+		compatible = "maxim,max31785a";
+		reg = <0x54>;
+	};
+
+	eeprom@55 {
+		compatible = "atmel,24c64";
+		reg = <0x55>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c6mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			humidity-sensor@40 {
+				compatible = "ti,hdc1080";
+				reg = <0x40>;
+			};
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp275";
+				reg = <0x48>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "enclosure-id-led";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "attention-led";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					label = "enclosure-fault-rollup-led";
+					reg = <2>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					label = "power-on-led";
+					reg = <3>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+
+			temperature-sensor@76 {
+				compatible = "infineon,dps310";
+				reg = <0x76>;
+			};
+		};
+
+		i2c6mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c6mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c6mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+
+	pca3: gpio@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca4: gpio@77 {
+		compatible = "nxp,pca9539";
+		reg = <0x77>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"PE_NVMED0_EXP_PRSNT_N",
+			"PE_NVMED1_EXP_PRSNT_N",
+			"PE_NVMED2_EXP_PRSNT_N",
+			"PE_NVMED3_EXP_PRSNT_N",
+			"LED_FAULT_NVMED0",
+			"LED_FAULT_NVMED1",
+			"LED_FAULT_NVMED2",
+			"LED_FAULT_NVMED3",
+			"FAN0_PRESENCE_R_N",
+			"FAN1_PRESENCE_R_N",
+			"FAN2_PRESENCE_R_N",
+			"FAN3_PRESENCE_R_N",
+			"FAN4_PRESENCE_R_N",
+			"FAN5_PRESENCE_N",
+			"FAN6_PRESENCE_N",
+			"";
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c7mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c7mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c7mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c7mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			regulator@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+			};
+		};
+
+		i2c7mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c7mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			regulator@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+			};
+		};
+
+		i2c7mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c7mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	bus-frequency = <400000>;
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c8mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			regulator@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+			};
+		};
+
+		i2c8mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			regulator@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+			};
+
+			regulator@41 {
+				compatible = "infineon,tda38640";
+				reg = <0x41>;
+			};
+
+			regulator@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+			};
+
+			regulator@5b {
+				compatible = "mps,mp2971";
+				reg = <0x5b>;
+			};
+		};
+
+		i2c8mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c8mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c8mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c8mux1chn0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c8mux1chn1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c8mux1chn2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c8mux1chn3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				i2c8mux1chn4: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				i2c8mux1chn5: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				i2c8mux1chn6: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				i2c8mux1chn7: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		i2c8mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c8mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp432";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c8mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			regulator@40 {
+				compatible = "infineon,ir38060";
+				reg = <0x40>;
+			};
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	regulator@40 {
+		compatible = "infineon,ir38263";
+		reg = <0x40>;
+	};
+
+	regulator@41 {
+		compatible = "infineon,ir38263";
+		reg = <0x41>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&eventlog>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+
+	regulator@41 {
+		compatible = "infineon,ir38263";
+		reg = <0x41>;
+	};
+
+	led-controller@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "efuse-12v-slots";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "efuse-3p3v-slot";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nic2-pert";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcie-perst9";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "pcie-perst10";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "pcie-perst11";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "pcie-perst12";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "pcie-perst13";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcie-perst14";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcie-perst15";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "pcie-perst16";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "PV-cp1-sw1stk4-perst";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "PV-cp1-sw1stk5-perst";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "pe-cp-drv2-perst";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "pe-cp-drv3-perst";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	gpio@75 {
+		compatible = "nxp,pca9539";
+		reg = <0x75>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"PLUG_DETECT_PCIE_J109_N",
+			"PLUG_DETECT_PCIE_J110_N",
+			"PLUG_DETECT_PCIE_J111_N",
+			"PLUG_DETECT_PCIE_J112_N",
+			"PLUG_DETECT_PCIE_J113_N",
+			"PLUG_DETECT_PCIE_J114_N",
+			"PLUG_DETECT_PCIE_J115_N",
+			"PLUG_DETECT_PCIE_J116_N",
+			"PLUG_DETECT_M2_SSD2_N",
+			"PLUG_DETECT_NIC2_N",
+			"SEL_SMB_DIMM_CPU1",
+			"presence-ps0",
+			"presence-ps1",
+			"", "",
+			"PWRBRD_PLUG_DETECT1_N";
+	};
+
+	gpio@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SW1_BOOTRCVRYB1_N",
+			"SW1_BOOTRCVRYB0_N",
+			"SW2_BOOTRCVRYB1_N",
+			"SW2_BOOTRCVRYB0_N",
+			"SW3_4_BOOTRCVRYB1_N",
+			"SW3_4_BOOTRCVRYB0_N",
+			"SW5_BOOTRCVRYB1_N",
+			"SW5_BOOTRCVRYB0_N",
+			"SW6_BOOTRCVRYB1_N",
+			"SW6_BOOTRCVRYB0_N",
+			"SW1_RESET_N",
+			"SW3_RESET_N",
+			"SW4_RESET_N",
+			"SW2_RESET_N",
+			"SW5_RESET_N",
+			"SW6_RESET_N";
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c14mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c14mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c14mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c14mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			regulator@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+			};
+		};
+
+		i2c14mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c14mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			regulator@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+			};
+		};
+
+		i2c14mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c14mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	bus-frequency = <400000>;
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			regulator@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+			};
+		};
+
+		i2c15mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			regulator@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+			};
+
+			regulator@41 {
+				compatible = "infineon,tda38640";
+				reg = <0x41>;
+			};
+
+			regulator@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+			};
+
+			regulator@5b {
+				compatible = "mps,mp2971";
+				reg = <0x5b>;
+			};
+		};
+
+		i2c15mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c15mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c15mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c15mux1chn0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c15mux1chn1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c15mux1chn2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c15mux1chn3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				i2c15mux1chn4: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				i2c15mux1chn5: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				i2c15mux1chn6: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				i2c15mux1chn7: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		i2c15mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c15mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp432";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c15mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			regulator@40 {
+				compatible = "infineon,ir38060";
+				reg = <0x40>;
+			};
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp432";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
new file mode 100644
index 000000000000..79c6919b3570
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
@@ -0,0 +1,907 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "FP5280G2 BMC";
+	compatible = "inspur,fp5280g2-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		coldfire_memory: codefire_memory@9ef00000 {
+			reg = <0x9ef00000 0x00100000>;
+			no-map;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "aspeed,ast2500-cf-fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		memory-region = <&coldfire_memory>;
+		aspeed,sram = <&sram>;
+		aspeed,cvic = <&cvic>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(B, 3)>;
+		};
+
+		event-ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 0)>;
+		};
+
+		event-ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 1)>;
+		};
+
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
+			linux,code = <1>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <3>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		event-fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		event-fan5-presence {
+			label = "fan5-presence";
+			gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fan6-presence {
+			label = "fan6-presence";
+			gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		event-fan7-presence {
+			label = "fan7-presence";
+			gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "power";
+			/* TODO: dummy gpio */
+			gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		init-ok {
+			label = "init-ok";
+			gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		front-memory {
+			label = "front-memory";
+			gpios = <&gpio ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		front-syshot {
+			label = "front-syshot";
+			gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		front-syshealth {
+			label = "front-syshealth";
+			gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		front-fan {
+			label = "front-fan";
+			gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		front-psu {
+			label = "front-psu";
+			gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			label = "identify";
+			gpios = <&gpio ASPEED_GPIO(Z, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","front-psu","checkstop","cfam-reset","","","init-ok",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"ps0-presence","ps1-presence","","","front-memory","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","front-fan","","","",
+	/*I0-I7*/	"front-syshealth","front-syshot","mux-gpios","enable-gpios","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","power","trans-gpios","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","identify",
+	/*AA0-AA7*/	"clock-gpios","","data-gpios","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	/* Test Point */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	/* APSS */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	/* LCD */
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		label = "fru";
+	};
+
+};
+
+&i2c2 {
+	status = "okay";
+
+	tmp112@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+		label = "inlet";
+	};
+
+	tmp112@49 {
+		compatible = "ti,tmp112";
+		reg = <0x49>;
+		label = "outlet";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			tmp112@4a {
+				compatible = "ti,tmp112";
+				reg = <0x4a>;
+				label = "psu_inlet";
+			};
+
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			tmp112@4a {
+				compatible = "ti,tmp112";
+				reg = <0x4a>;
+				label = "ocp_zone";
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			tmp112@4a {
+				compatible = "ti,tmp112";
+				reg = <0x4a>;
+				label = "bmc_zone";
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			tmp112@7c {
+				compatible = "microchip,emc1413";
+				reg = <0x7c>;
+			};
+		};
+
+	};
+};
+
+&i2c3 {
+	/* Riser Card */
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds3232";
+		reg = <0x68>;
+	};
+};
+
+&i2c5 {
+	/* vr  */
+	status = "okay";
+};
+
+&i2c6 {
+	/* bp card */
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adm1278@10 {
+				compatible = "adi,adm1278";
+				reg = <0x10>;
+			};
+
+			adm1278@13 {
+				compatible = "adi,adm1278";
+				reg = <0x13>;
+			};
+
+			adm1278@50 {
+				compatible = "adi,adm1278";
+				reg = <0x50>;
+			};
+
+			adm1278@53 {
+				compatible = "adi,adm1278";
+				reg = <0x53>;
+			};
+
+		};
+
+		/*pcie riser*/
+
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pca0: pca9555@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+	};
+
+	pca1: pca9555@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca2: pca9555@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca3: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca4: pca9555@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca5: pca9555@25 {
+		compatible = "nxp,pca9555";
+		reg = <0x25>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+};
+
+&i2c9 {
+	/* cpld */
+	status = "okay";
+};
+
+&i2c10 {
+	/* hdd bp */
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	power-supply@58 {
+		compatible = "inspur,ipsps1";
+		reg = <0x58>;
+	};
+
+	power-supply@59 {
+		compatible = "inspur,ipsps1";
+		reg = <0x59>;
+	};
+};
+
+&i2c12 {
+	/* odcc */
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&ibt {
+	status = "okay";
+
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+	 &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default
+	 &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default
+	 &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default
+	 &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default
+	 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default
+		&pinctrl_pwm4_default &pinctrl_pwm5_default
+		&pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
+	};
+
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-nf5280m6.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-nf5280m6.dts
new file mode 100644
index 000000000000..92b9b3987c92
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-nf5280m6.dts
@@ -0,0 +1,691 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Inspur Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "NF5280M6 BMC";
+	compatible = "inspur,nf5280m6-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+	    compatible = "gpio-leds";
+
+		bmc_alive {
+			label = "bmc_alive";
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+			led-pattern = <1000 1000>;
+		};
+
+		front-fan {
+			label = "front-fan";
+			gpios = <&gpio ASPEED_GPIO(F,2) GPIO_ACTIVE_LOW>;
+		};
+
+	    front-psu {
+			label = "front-psu";
+			gpios = <&gpio ASPEED_GPIO(F,3) GPIO_ACTIVE_LOW>;
+		};
+
+	    front-syshot {
+			label = "front-syshot";
+			gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		front-memory {
+			label = "front-memory";
+			gpios = <&gpio ASPEED_GPIO(S, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			label = "identify";
+			gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		<&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&gpio {
+	status = "okay";
+	/* Enable GPIOE0 and GPIOE2 pass-through by default */
+	pinctrl-names = "pass-through";
+	pinctrl-0 = <&pinctrl_gpie0_default
+			&pinctrl_gpie2_default>;
+	gpio-line-names =
+	/*A0-A7*/	"","MAC2LINK","BMC_RESET_CPLD","","BMC_SCL9","","MAC2MDC_R","",
+	/*B0-B7*/	"BMC_INIT_OK","FM_SKU_ID2","FM_SPD_DDRCPU_LVLSHFT_DIS_R_N",
+				"FM_CPU_MSMI_CATERR_LVT3_BMC_N","","FM_CPU0_PROCHOT_LVT3_N",
+				"FM_CPU_MEM_THERMTRIP_LVT3_N","BIOS_LOAD_DEFAULT_R_N",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","BMC_SD2CMD","BMC_SD2DAT0","BMC_SD2DAT1","BMC_SD2DAT2",
+				"BMC_SD2DAT3","BMC_SD2DET","BMC_SD2WPT",
+	/*E0-E7*/	"FM_BOARD_ID0","FM_BOARD_ID1","FM_BOARD_ID2","FM_BOARD_ID3",
+				"FM_BOARD_ID4","FM_BOARD_ID5","","",
+	/*F0-F7*/	"PSU1_PRESENT_N","PSU2_PRESENT_N","FAN_FAULT_LED_N","PSU_FAULT_LED_N",
+				"BIOS_DEBUG_MODE_N","FP_LCD_RESET","FAN_TYPE_SEL",
+				"RST_GLB_RST_WARN_N",
+	/*G0-G7*/	"IRQ_LPTM21L_ALERT_N","IRQ_PLD_ALERT_N","AC_FAIL_N","FP_LCD_PRESENT_BMC",
+				"BMC_JTAG_TCK_MUX_SEL","BMC_BIOS_RESERVED","SYS_NMI_N","BMC_NMI_N",
+	/*H0-H7*/	"JTAG_BMC_TDI","JTAG_BMC_TDO","JTAG_BMC_TCK","JTAG_BMC_TMS","FM_BOARD_ID6",
+				"FM_SKU_ID0","IRQ_SML1_PMBUS_ALERT_N","IRQ_SML0_ALERT_MUX_N",
+	/*I0-I7*/	"FM_CPU_ERR0_LVT3_BMC_N","FM_CPU_ERR1_LVT3_BMC_N","FM_BMC_PCH_SCI_LPC_N",
+				"FM_SYS_THROTTLE_LVC3","SPI2_PCH_CS0_N","","","",
+	/*J0-J7*/	"FM_CPU0_SKTOCC_LVT3_N","FM_CPU1_SKTOCC_LVT3_N","","SYSHOT_FAULT_LED_N",
+				"VGA_HSYNC","VGA_VSYNC","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","SYS_UART_TXD1","SYS_UART_RXD1",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","FM_PCH_BMC_THERMTRIP_N","INTRUDER_N",
+	/*R0-R7*/	"SPI_BMC_BOOT_CS1_R_N","FM_CPU_MEMHOT_LVC3_N",
+				"DBP_CPU_PREQ_N","FM_CPU_ERR2_LVT3_BMC_N",
+				"RISER_NCSI_EN_N","","LOM_NCSI_EN_N","OCP_NCSI_EN_N",
+	/*S0-S7*/	"BMC_XDP_PRDY_N","SIO_POWER_GOOD","BMC_PWR_DEBUG_R_N","BMC_DEBUG_EN_R_N","",
+				"GPIOS5_BMC","","GPIOS7_BMC",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","BMC_DET_UID_N","BMC_JTAG_SEL","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"XDP_PRESENT_N","DBP_SYSPWROK","BMC_JTAG_SEL","FM_SMI_ACTIVE_N","",
+				"GPIOZ5","","",
+	/*AA0-AA7*/	"FP_BMC_SYSLED_N","PS_PWROK","RST_PLTRST_BMC_N","HDA_SDO_BMC",
+				"FM_SLPS4_R_N","","POWER_BUTTON","POWER_OUT",
+	/*AB0-AB7*/	"RESET_OUT","RESET_BUTTON","BIOS_REFLASH","POST_COMPLETE","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&i2c0 {
+	/* FP_LCD */
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		label = "fru";
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	tmp112@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+		label = "inlet";
+	};
+
+	tmp112@49 {
+		compatible = "ti,tmp112";
+		reg = <0x49>;
+		label = "outlet";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9548";
+		reg = <0x72>;
+	};
+};
+
+&i2c4 {
+	/* IPMB */
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	adm1278@33 {
+		compatible = "adi,adm1293";
+		reg = <0x33>;
+	};
+
+	adm1278@32 {
+		compatible = "adi,adm1293";
+		reg = <0x32>;
+	};
+
+	adm1278@20 {
+		compatible = "adi,adm1293";
+		reg = <0x20>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pca0: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca1: pca9555@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca2: pca9555@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca3: pca9555@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+};
+
+&i2c9 {
+	/* cpld */
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+
+	pca4: pca9555@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca5: pca9555@25 {
+		compatible = "nxp,pca9555";
+		reg = <0x25>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	power-supply@58 {
+		compatible = "inspur,ipsps1";
+		reg = <0x58>;
+	};
+
+	power-supply@59 {
+		compatible = "inspur,ipsps1";
+		reg = <0x59>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default
+		&pinctrl_pwm4_default &pinctrl_pwm5_default
+		&pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
+	};
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&kcs4 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca4>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+	 &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default
+	 &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default
+	 &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default
+	 &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default
+	 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vuart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-on5263m5.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-on5263m5.dts
new file mode 100644
index 000000000000..7a78c34cff40
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-on5263m5.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Inspur Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "ON5263M5 BMC";
+	compatible = "inspur,on5263m5-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "earlycon";
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>;
+		};
+	};
+
+	leds {
+	    compatible = "gpio-leds";
+	    bmc_alive {
+		label = "bmc_alive";
+		gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
+		linux,default-trigger = "timer";
+	    };
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp421@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+
+	tmp112@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	adm1278@11 {
+		  compatible = "adi,adm1278";
+		  reg = <0x11>;
+	};
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+};
+
+&adc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-intel-s2600wf.dts
new file mode 100644
index 000000000000..da55e7b29fac
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-intel-s2600wf.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017 Intel Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+
+/ {
+	model = "S2600WF BMC";
+	compatible = "intel,s2600wf-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default
+			 &pinctrl_pwm6_default &pinctrl_pwm7_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-starscream.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-starscream.dts
new file mode 100644
index 000000000000..ec82af94e1fb
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-starscream.dts
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 Inventec Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include "aspeed-g6-pinctrl.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "STARSCREAM BMC";
+	compatible = "inventec,starscream-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-uid {
+			label = "UID_LED";
+			gpios = <&gpio0 186 GPIO_ACTIVE_LOW>;
+		};
+
+		led-heartbeat {
+			label = "HB_LED";
+			gpios = <&gpio0 127 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+#include "openbmc-flash-layout.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc2";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+&i2c1 {
+	status = "okay";
+};
+&i2c2 {
+	status = "okay";
+};
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	// I2C EXPANDER
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			// AMD SB-TSI CPU1
+			sbtsi@4c {
+				compatible = "amd,sbtsi";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			// AMD SB-TSI CPU2
+			sbtsi@48 {
+				compatible = "amd,sbtsi";
+				reg = <0x48>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	// I2C EXPANDER U153
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		usb_hub: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		riser1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		riser2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	// Motherboard Temp_U89
+	temperature-sensor@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+
+	// RunBMC Temp_U6
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	// I2C EXPANDER U40
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	// FRU RunBMC
+	eeprom@51 {
+		compatible = "atmel,24c512";
+		reg = <0x51>;
+		pagesize = <128>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+	// FRU SCM
+	eeprom@51 {
+		compatible = "atmel,24c512";
+		reg = <0x51>;
+		pagesize = <128>;
+	};
+
+	// SCM Temp_U17
+	temperature-sensor@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/   "","","","","","","","",
+	/*B0-B7*/   "alert-psu0-smb-r-n","bmc-ready","","assert-cpu0-prochot-r-n",
+	"","","","",
+	/*C0-C7*/   "","","","","","","","",
+	/*D0-D7*/   "","","","","","","","",
+	/*E0-E7*/   "","","","","","","","",
+	/*F0-F7*/   "","","","","reset-sgpio-r-n","","","",
+	/*G0-G7*/   "","","scm-jtag-mux-select","","","","","",
+	/*H0-H7*/   "","","","","reset-out","power-out","","",
+	/*I0-I7*/   "","","","","","","irq-bmc-cpu0-buf-nmi-n","",
+	/*J0-J7*/   "","","","","","","","",
+	/*K0-K7*/   "","","","","","","","",
+	/*L0-L7*/   "","","","","","","","",
+	/*M0-M7*/   "","","","","","","","",
+	/*N0-N7*/   "","","ncsi-ocp-clk-en-n","","","","","",
+	/*O0-O7*/   "","","","","","","cpu1-thermal-trip-n","",
+	/*P0-P7*/   "","","","","","","","",
+	/*Q0-Q7*/   "cpu0-prochot-n","","cpu1-prochot-n","","cpu0-pe-rst0","","","",
+	/*R0-R7*/   "","","","","","","","",
+	/*S0-S7*/   "","","","",
+	"","PCH_SLP_S4_BMC_N","cpu0-thermtrip-n","alert-psu1-smb-r-n",
+	/*T0-T7*/   "","","","","","","","",
+	/*U0-U7*/   "","","","","","","","",
+	/*V0-V7*/   "bios-recovery-buf-n","","assert-cpu1-prochot-r-n","",
+	"power-chassis-good","","","",
+	/*W0-W7*/   "","","","","","","","",
+	/*X0-X7*/   "","","","","platform-type","","","",
+	/*Y0-Y7*/   "","","","","","","","",
+	/*Z0-Z7*/   "","cpld-power-break-n","","","","","","",
+	/*AA0-AA7*/ "","","","","","","","",
+	/*AB0-AB7*/ "","","","","","","","",
+	/*AC0-AC7*/ "","","","","","","","";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <64>;
+	bus-frequency = <1000000>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+	non-removable;
+	max-frequency = <52000000>;
+	bus-width = <8>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+	aspeed,vhub-downstream-ports = <7>;
+	aspeed,vhub-generic-endpoints = <21>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb2ad_default>;
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
new file mode 100644
index 000000000000..c713cb7a6187
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2021 Inventec Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include "aspeed-g6-pinctrl.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+       model = "TRANSFORMERS BMC";
+       compatible = "inventec,transformer-bmc", "aspeed,ast2600";
+
+       aliases {
+               serial4 = &uart5;
+       };
+
+       chosen {
+               stdout-path = &uart5;
+               bootargs = "console=ttyS4,115200n8";
+       };
+
+       memory@80000000 {
+               device_type = "memory";
+               reg = <0x80000000 0x80000000>;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               // UID led
+               uid {
+                       label = "UID_LED";
+                       gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+               };
+
+               // Heart beat led
+               heartbeat {
+                       label = "HB_LED";
+                       gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&mdio0 {
+       status = "okay";
+
+       ethphy0: ethernet-phy@0 {
+               compatible = "ethernet-phy-ieee802.3-c22";
+               reg = <1>;
+       };
+};
+
+&mac3 {
+       status = "okay";
+       phy-mode = "rgmii";
+       phy-handle = <&ethphy0>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&fmc {
+       status = "okay";
+
+       flash@0 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bmc";
+               spi-max-frequency = <33000000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+#include "openbmc-flash-layout.dtsi"
+       };
+
+       flash@1 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bmc2";
+               spi-max-frequency = <33000000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+       };
+};
+
+&spi1 {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_spi1_default>;
+
+       flash@0 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bios";
+               spi-max-frequency = <33000000>;
+               spi-tx-bus-width = <1>;
+               spi-rx-bus-width = <1>;
+       };
+};
+
+&wdt1 {
+       status = "okay";
+};
+
+&uart1 {
+       status = "okay";
+};
+
+&uart5 {
+       status = "okay";
+};
+
+&i2c0 {
+       status = "okay";
+
+       //Set bmc' slave address;
+       bmc_slave@10 {
+               compatible = "ipmb-dev";
+               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+               i2c-protocol;
+       };
+};
+
+&i2c2 {
+       status = "okay";
+};
+
+&i2c3 {
+       // FRU AT24C512C-SSHM-T
+       status = "okay";
+       eeprom@50 {
+               compatible = "atmel,24c512";
+               reg = <0x50>;
+               pagesize = <128>;
+       };
+};
+
+&i2c5 {
+       status = "okay";
+};
+
+&i2c6 {
+       status = "okay";
+
+       tmp75@49 {
+               compatible = "ti,tmp75";
+               reg = <0x49>;
+       };
+
+       tmp75@4f {
+               compatible = "ti,tmp75";
+               reg = <0x4f>;
+       };
+
+       tmp468@48 {
+               compatible = "ti,tmp468";
+               reg = <0x48>;
+       };
+};
+
+&i2c7 {
+       status = "okay";
+       adm1278@40 {
+               compatible = "adi,adm1278";
+               reg = <0x40>;
+       };
+};
+
+
+&i2c8 {
+       // FRU AT24C512C-SSHM-T
+       status = "okay";
+
+       eeprom@51 {
+               compatible = "atmel,24c512";
+               reg = <0x51>;
+               pagesize = <128>;
+       };
+
+       eeprom@53 {
+               compatible = "atmel,24c512";
+               reg = <0x53>;
+               pagesize = <128>;
+       };
+};
+
+&i2c9 {
+       // M.2
+       status = "okay";
+};
+
+&i2c10 {
+       // I2C EXPANDER
+       status = "okay";
+
+       i2c-mux@71 {
+               compatible = "nxp,pca9544";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x71>;
+       };
+
+       i2c-mux@73 {
+               compatible = "nxp,pca9544";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x73>;
+       };
+};
+
+&i2c11 {
+       // I2C EXPANDER
+       status = "okay";
+
+       i2c-mux@70 {
+               compatible = "nxp,pca9544";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x70>;
+
+               pcie_eeprom_riser1: i2c@0 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0>;
+
+                       eeprom@55 {
+                               compatible = "atmel,24c512";
+                               reg = <0x55>;
+                               pagesize = <128>;
+                       };
+               };
+
+               pcie_eeprom_riser2: i2c@1 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <1>;
+
+                       eeprom@55 {
+                               compatible = "atmel,24c512";
+                               reg = <0x55>;
+                               pagesize = <128>;
+                       };
+               };
+
+               pcie_eeprom_riser3: i2c@2 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <2>;
+
+                       eeprom@55 {
+                               compatible = "atmel,24c512";
+                               reg = <0x55>;
+                               pagesize = <128>;
+                       };
+               };
+       };
+};
+
+&i2c12 {
+       status = "okay";
+
+       psu0:psu0@58 {
+               compatible = "pmbus";
+               reg = <0x58>;
+       };
+};
+
+&gpio0 {
+       status = "okay";
+       gpio-line-names =
+       /*A0-A7*/   "","","","","","","","",
+       /*B0-B7*/   "presence-ps0","power-chassis-good","","","","","presence-ps1","",
+       /*C0-C7*/   "","","","","","","","",
+       /*D0-D7*/   "","","","","","","","",
+       /*E0-E7*/   "","","","","","","","",
+       /*F0-F7*/   "","","","","power-chassis-control","","","",
+       /*G0-G7*/   "","","jtag-mux","","","","","",
+       /*H0-H7*/   "","","","","reset-button","power-button","","",
+       /*I0-I7*/   "","","","","","","","",
+       /*J0-J7*/   "","","","","","","","",
+       /*K0-K7*/   "","","","","","","","",
+       /*L0-L7*/   "","","","","","","","",
+       /*M0-M7*/   "","","","","","","","",
+       /*N0-N7*/   "","","","","","","","",
+       /*O0-O7*/   "","","","","","","","",
+       /*P0-P7*/   "","","","tck-mux","","","","",
+       /*Q0-Q7*/   "","","","","","","","",
+       /*R0-R7*/   "","","","","","","","",
+       /*S0-S7*/   "","","","","","","","",
+       /*T0-T7*/   "","","","","","","","",
+       /*U0-U7*/   "","nmi-button","","","","","","",
+       /*V0-V7*/   "","","","","power-config-full-load","","","",
+       /*W0-W7*/   "","","","","","","","",
+       /*X0-X7*/   "","","","","","","","",
+       /*Y0-Y7*/   "","","","","","","","",
+       /*Z0-Z7*/   "","","","","","","","",
+       /*AA0-AA7*/ "","","","","","","","",
+       /*AB0-AB7*/ "","","","","","","","",
+       /*AC0-AC7*/ "","","","","","","","";
+};
+
+&lpc_snoop {
+       status = "okay";
+       snoop-ports = <0x80>;
+};
+
+&emmc_controller {
+       status = "okay";
+};
+
+&emmc {
+       status = "okay";
+       non-removable;
+       max-frequency = <52000000>;
+       bus-width = <8>;
+};
+
+&vhub {
+       status = "okay";
+       aspeed,vhub-downstream-ports = <7>;
+       aspeed,vhub-generic-endpoints = <21>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usb2ad_default>;
+};
+
+&rtc {
+       status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts
new file mode 100644
index 000000000000..4ad0f44af1ab
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts
@@ -0,0 +1,569 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for Lenovo Hr630 platform
+ *
+ * Copyright (C) 2019-present Lenovo
+ */
+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "HR630 BMC";
+	compatible = "lenovo,hr630-bmc", "aspeed,ast2500";
+
+	aliases {
+		i2c14 = &i2c_rbp;
+		i2c15 = &i2c_fbp1;
+		i2c16 = &i2c_fbp2;
+		i2c17 = &i2c_fbp3;
+		i2c18 = &i2c_riser2;
+		i2c19 = &i2c_pcie4;
+		i2c20 = &i2c_riser1;
+		i2c21 = &i2c_ocp;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x00100000>; /* 1M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+		<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+		<&adc 8>, <&adc 9>, <&adc 10>,
+		<&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default
+			&pinctrl_nrts2_default
+			&pinctrl_ndtr2_default
+			&pinctrl_ndsr2_default
+			&pinctrl_ncts2_default
+			&pinctrl_ndcd2_default
+			&pinctrl_nri2_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+			&pinctrl_rxd3_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&adc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	/* temp1 inlet */
+	tmp75@4e {
+		compatible = "national,lm75";
+		reg = <0x4e>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	/* temp2 outlet */
+	tmp75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	/*	Slot 0,
+	 *	Slot 1,
+	 *	Slot 2,
+	 *	Slot 3
+	 */
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;	/* may use mux@70 next. */
+
+		i2c_rbp: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_fbp1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_fbp2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_fbp3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	/*	Slot 0,
+	 *	Slot 1,
+	 *	Slot 2,
+	 *	Slot 3
+	 */
+	i2c-mux@76 {
+		compatible = "nxp,pca9546";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;  /* may use mux@76 next. */
+
+		i2c_riser2: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_pcie4: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_riser1: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_ocp: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	eeprom@57 {
+		compatible = "atmel,24c256";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+	&pinctrl_pwm1_default
+	&pinctrl_pwm2_default
+	&pinctrl_pwm3_default
+	&pinctrl_pwm4_default
+	&pinctrl_pwm5_default
+	&pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@10 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@11 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@12 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@13 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+};
+
+&gpio {
+
+	pin-gpio-b5-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "IRQ_BMC_PCH_SMI_LPC_N";
+	};
+
+	pin-gpio-f0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "IRQ_BMC_PCH_NMI_R";
+	};
+
+	pin-gpio-f3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_BUS0_RST_OUT_N";
+	};
+
+	pin-gpio-f4-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "FM_SKT0_FAULT_LED";
+	};
+
+	pin-gpio-f5-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "FM_SKT1_FAULT_LED";
+	};
+
+	pin-gpio-g4-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FAN_PWR_CTL_N";
+	};
+
+	pin-gpio-g7-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RST_BMC_PCIE_I2CMUX_N";
+	};
+
+	pin-gpio-h2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PSU1_FFS_N_R";
+	};
+
+	pin-gpio-h3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PSU2_FFS_N_R";
+	};
+
+	pin-gpio-i3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_INTRUDED_COVER";
+	};
+
+	pin-gpio-j2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_BIOS_UPDATE_N";
+	};
+
+	pin-gpio-j3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RST_BMC_HDD_I2CMUX_N";
+	};
+
+	pin-gpio-s2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_VGA_SW";
+	};
+
+	pin-gpio-s4-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 4) GPIO_ACTIVE_HIGH>;
+		output;
+		line-name = "VBAT_EN_N";
+	};
+
+	pin-gpio-s6-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PU_BMC_GPIOS6";
+	};
+
+	pin-gpio-y0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_NCSI_MUX_CTL_S0";
+	};
+
+	pin-gpio-y1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Y, 1) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_NCSI_MUX_CTL_S1";
+	};
+
+	pin-gpio-z0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_RISER2_INT_N";
+	};
+
+	pin-gpio-z2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_RISER2_RESET_N";
+	};
+
+	pin-gpio-z3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_PCH_SCI_LPC_N";
+	};
+
+	pin-gpio-z7-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_POST_CMPLT_N";
+	};
+
+	pin-gpio-aa0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "HOST_BMC_USB_SEL";
+	};
+
+	pin-gpio-aa5-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_BUS1_RST_OUT_N";
+	};
+
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts
new file mode 100644
index 000000000000..fdcf4492fb4e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts
@@ -0,0 +1,666 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for Lenovo Hr855xg2 platform
+ *
+ * Copyright (C) 2019-present Lenovo
+ */
+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "HR855XG2 BMC";
+	compatible = "lenovo,hr855xg2-bmc", "aspeed,ast2500";
+
+	aliases {
+		i2c14 = &i2c_riser1;
+		i2c15 = &i2c_riser2;
+		i2c16 = &i2c_riser3;
+		i2c17 = &i2c_M2;
+		i2c18 = &channel_0;
+		i2c19 = &channel_1;
+		i2c20 = &channel_2;
+		i2c21 = &channel_3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x00100000>; /* 1M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+		<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+		<&adc 8>, <&adc 9>, <&adc 10>,<&adc 11>,
+		<&adc 12>,<&adc 13>,<&adc 14>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default
+			&pinctrl_nrts2_default
+			&pinctrl_ndtr2_default
+			&pinctrl_ndsr2_default
+			&pinctrl_ncts2_default
+			&pinctrl_ndcd2_default
+			&pinctrl_nri2_default>;
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c_riser1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_riser2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_riser3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_M2: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	bus-frequency = <90000>;
+	HotSwap@10 {
+		compatible = "adi,adm1272";
+		reg = <0x10>;
+	};
+
+	VR@45 {
+		compatible = "pmbus";
+		reg = <0x45>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	/* temp1 */
+	tmp75@49 {
+		compatible = "national,lm75";
+		reg = <0x49>;
+	};
+
+	/* temp2 */
+	tmp75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c256";
+		reg = <0x54>;
+		pagesize = <16>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+	&pinctrl_pwm1_default
+	&pinctrl_pwm2_default
+	&pinctrl_pwm3_default
+	&pinctrl_pwm4_default
+	&pinctrl_pwm5_default
+	&pinctrl_pwm6_default
+	&pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@10 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@11 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@12 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@13 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@14 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+
+	fan@15 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+
+	fan@16 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+};
+
+&gpio {
+
+	pin-gpio-a1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "BMC_EMMC_RST_N";
+	};
+
+	pin-gpio-a3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "PCH_PWROK_BMC_FPGA";
+	};
+
+	pin-gpio-b5-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "IRQ_BMC_PCH_SMI_LPC_N";
+	};
+
+	pin-gpio-b7-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "CPU_SM_WP";
+	};
+
+	pin-gpio-e0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "PDB_PSU_SEL";
+	};
+
+	pin-gpio-e2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LOCATOR_LED_N";
+	};
+
+	pin-gpio-e5-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_DBP_PRESENT_R1_N";
+	};
+
+	pin-gpio-e6-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_ME_SECURITY_OVERRIDE_N";
+	};
+
+	pin-gpio-f0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "IRQ_BMC_PCH_NMI_R";
+	};
+
+	pin-gpio-f1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "CPU2_PROCDIS_BMC_N";
+	};
+
+	pin-gpio-f2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RM_THROTTLE_EN_N";
+	};
+
+	pin-gpio-f3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "FM_PMBUS_ALERT_B_EN";
+	};
+
+	pin-gpio-f4-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_FORCE_NM_THROTTLE_N";
+	};
+
+	pin-gpio-f6-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_CPU_PWR_DEBUG_N";
+	};
+
+	pin-gpio-g7-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_PCIE_I2C_MUX_RST_N";
+	};
+
+	pin-gpio-h6-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_DBP_PRESENT_R2_N";
+	};
+
+	pin-gpio-i3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SPI_BMC_BIOS_WP_N";
+	};
+
+	pin-gpio-j1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_USB_SEL";
+	};
+
+	pin-gpio-j2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PDB_SMB_RST_N";
+	};
+
+	pin-gpio-j3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SPI_BMC_BIOS_HOLD_N";
+	};
+
+	pin-gpio-l0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PDB_FAN_TACH_SEL";
+	};
+
+	pin-gpio-l1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SYS_RESET_BMC_FPGA_N";
+	};
+
+	pin-gpio-l4-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_EFUSE_FAN_G1_EN";
+	};
+
+	pin-gpio-l5-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_EFUSE_FAN_G2_EN";
+	};
+
+	pin-gpio-r6-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "CPU3_PROCDIS_BMC_N";
+	};
+
+	pin-gpio-r7-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "CPU4_PROCDIS_BMC_N";
+	};
+
+	pin-gpio-s1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 1) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "DBP_SYSPWROK_BMC";
+	};
+
+	pin-gpio-s2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PCH_RST_RSMRST_N";
+	};
+
+	pin-gpio-s6-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_HW_STRAP_5";
+	};
+
+	pin-gpio-z3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_PCH_SCI_LPC_N";
+	};
+
+	pin-gpio-aa0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "FW_PSU_ALERT_EN_N";
+	};
+
+	pin-gpio-aa4-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "DBP_CPU_PREQ_N";
+	};
+
+	pin-gpio-ab3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AB, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_WDTRST";
+	};
+
+	pin-gpio-ac6-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AC, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ESPI_BMC_ALERT_N";
+	};
+
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-microsoft-olympus.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-microsoft-olympus.dts
new file mode 100644
index 000000000000..3ef8358ff764
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-microsoft-olympus.dts
@@ -0,0 +1,207 @@
+//SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Olympus BMC";
+	compatible = "microsoft,olympus-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@5f000000 {
+			no-map;
+			reg = <0x5f000000 0x01000000>; /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		bmc_heartbeat {
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		power_green {
+			gpios = <&gpio ASPEED_GPIO(U, 2) GPIO_ACTIVE_HIGH>;
+		};
+
+		power_amber {
+			gpios = <&gpio ASPEED_GPIO(U, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+		<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 =    <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default>;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 =    <&pinctrl_pwm0_default
+			&pinctrl_pwm1_default
+			&pinctrl_pwm2_default
+			&pinctrl_pwm3_default
+			&pinctrl_pwm4_default
+			&pinctrl_pwm5_default
+			&pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
new file mode 100644
index 000000000000..4de38613b0ea
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
@@ -0,0 +1,1178 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "AST2600 GB200NVL BMC";
+	compatible = "nvidia,gb200nvl-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial2 = &uart3;
+		serial4 = &uart5;
+		i2c16   = &imux16;
+		i2c17   = &imux17;
+		i2c18   = &imux18;
+		i2c19   = &imux19;
+		i2c20   = &imux20;
+		i2c21   = &imux21;
+		i2c22   = &imux22;
+		i2c23   = &imux23;
+		i2c24   = &imux24;
+		i2c25   = &imux25;
+		i2c26   = &imux26;
+		i2c27   = &imux27;
+		i2c28   = &imux28;
+		i2c29   = &imux29;
+		i2c30   = &imux30;
+		i2c31   = &imux31;
+		i2c32   = &imux32;
+		i2c33   = &imux33;
+		i2c34   = &imux34;
+		i2c35   = &imux35;
+		i2c36   = &imux36;
+		i2c37   = &imux37;
+		i2c38   = &imux38;
+		i2c39   = &imux39;
+		i2c40	= &e1si2c0;
+		i2c41	= &e1si2c1;
+		i2c42	= &e1si2c2;
+		i2c43	= &e1si2c3;
+		i2c44	= &e1si2c4;
+		i2c45	= &e1si2c5;
+		i2c46	= &e1si2c6;
+		i2c47	= &e1si2c7;
+		i2c48	= &i2c17mux0;
+		i2c49	= &i2c17mux1;
+		i2c50	= &i2c17mux2;
+		i2c51	= &i2c17mux3;
+		i2c52	= &i2c25mux0;
+		i2c53	= &i2c25mux1;
+		i2c54	= &i2c25mux2;
+		i2c55	= &i2c25mux3;
+		i2c56	= &i2c29mux0;
+		i2c57	= &i2c29mux1;
+		i2c58	= &i2c29mux2;
+		i2c59	= &i2c29mux3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		ramoops@a0000000 {
+			compatible = "ramoops";
+			reg = <0xa0000000 0x100000>; /* 1MB */
+			record-size = <0x10000>; /* 64KB */
+			max-reason = <2>; /* KMSG_DUMP_OOPS */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-0 {
+			label = "uid_led";
+			gpios = <&sgpiom0 27 GPIO_ACTIVE_LOW>;
+		};
+		led-1 {
+			label = "fault_led";
+			gpios = <&sgpiom0 29 GPIO_ACTIVE_LOW>;
+		};
+		led-2 {
+			label = "power_led";
+			gpios = <&sgpiom0 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	buttons {
+		button-power {
+			label = "power-btn";
+			gpio = <&sgpiom0 156 GPIO_ACTIVE_LOW>;
+		};
+		button-uid {
+			label = "uid-btn";
+			gpio = <&sgpiom0 154 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	standby_power_regulator: standby-power-regulator {
+		status = "okay";
+		compatible = "regulator-fixed";
+		regulator-name = "standby_power";
+		gpio = <&gpio0 ASPEED_GPIO(M, 3) GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+// Enable Primary flash on FMC for bring up activity
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		compatible = "jedec,spi-nor";
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			u-boot@0 {
+				// 896KB
+				reg = <0x0 0xe0000>;
+				label = "u-boot";
+			};
+
+			kernel@100000 {
+				// 9MB
+				reg = <0x100000 0x900000>;
+				label = "kernel";
+			};
+
+			rofs@a00000 {
+				// 55292KB (extends to end of 64MB SPI - 4KB)
+				reg = <0xa00000 0x35FF000>;
+				label = "rofs";
+			};
+		};
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+
+	// Data SPI is 64MB in size
+	flash@0 {
+		status = "okay";
+		label = "config";
+		spi-max-frequency = <50000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			u-boot-env@0 {
+				// 256KB
+				reg = <0x0 0x40000>;
+				label = "u-boot-env";
+			};
+
+			rwfs@40000 {
+				// 16MB
+				reg = <0x40000 0x1000000>;
+				label = "rwfs";
+			};
+
+			log@1040000 {
+				// 40MB
+				reg = <0x1040000 0x2800000>;
+				label = "log";
+			};
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	// Enabling SOL
+	status = "okay";
+};
+
+&uart5 {
+	// BMC Debug Console
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&mdio0 {
+	status = "okay";
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+	ethphy3: ethernet-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <2>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy3>;
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&mac2 {
+	status = "okay";
+	phy-mode = "rmii";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+};
+
+/*
+ * Enable USB port A as device (via the virtual hub) to host
+ */
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+// USB 2.0 to HMC, on USB Port B
+&ehci1 {
+	status = "okay";
+};
+
+// USB 1.0
+&uhci {
+	status = "okay";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"RUN_POWER_FAULT_L-I","SYS_RST_IN_L-O",
+		"RUN_POWER_PG-I","PWR_BRAKE_L-O",
+		"SYS_RST_OUT_L-I","RUN_POWER_EN-O",
+		"L0L1_RST_REQ_OUT_L-I","SHDN_FORCE_L-O",
+		"L2_RST_REQ_OUT_L-I","SHDN_REQ_L-O",
+		"SHDN_OK_L-I","UID_LED_N-O",
+		"BMC_I2C1_FPGA_ALERT_L-I","SYS_FAULT_LED_N-O",
+		"BMC_I2C0_FPGA_ALERT_L-I","PWR_LED_N-O",
+		"FPGA_RSVD_FFU3-I","",
+		"FPGA_RSVD_FFU2-I","",
+		"FPGA_RSVD_FFU1-I","",
+		"FPGA_RSVD_FFU0-I","BMC_I2C_SSIF_ALERT_L-O",
+		"CPU_BOOT_DONE-I","JTAG_MUX_SELECT-O",
+		"SPI_BMC_FPGA_INT_L-I","RTC_CLR_L-O",
+		"THERM_BB_WARN_L-I","UART_MUX_SEL-O",
+		"THERM_BB_OVERT_L-I","",
+		"CPU0_UPHY3_PRSNT1_L-I","IOBRD0_RUN_POWER_EN-O",
+		"CPU0_UPHY3_PRSNT0_L-I","IOBRD1_RUN_POWER_EN-O",
+		"CPU0_UPHY2_PRSNT1_L-I","FPGA_RSVD_FFU4-O",
+		"CPU0_UPHY2_PRSNT0_L-I","FPGA_RSVD_FFU5-O",
+		"CPU0_UPHY1_PRSNT1_L-I","FPGA_RSVD_FFU6-O",
+		"CPU0_UPHY1_PRSNT0_L-I","FPGA_RSVD_FFU7-O",
+		"CPU0_UPHY0_PRSNT1_L-I","RSVD_NV_PLT_DETECT-O",
+		"CPU0_UPHY0_PRSNT0_L-I","SPI1_INT_L-O",
+		"CPU1_UPHY3_PRSNT1_L-I","",
+		"CPU1_UPHY3_PRSNT0_L-I","HMC_EROT_MUX_STATUS",
+		"CPU1_UPHY2_PRSNT1_L-I","",
+		"CPU1_UPHY2_PRSNT0_L-I","",
+		"CPU1_UPHY1_PRSNT1_L-I","",
+		"CPU1_UPHY1_PRSNT0_L-I","",
+		"CPU1_UPHY0_PRSNT1_L-I","",
+		"CPU1_UPHY0_PRSNT0_L-I","",
+		"FAN1_PRESENT_L-I","",
+		"FAN0_PRESENT_L-I","",
+		"","",
+		"IPEX_CABLE_PRSNT_L-I","",
+		"M2_1_PRSNT_L-I","",
+		"M2_0_PRSNT_L-I","",
+		"CPU1_UPHY4_PRSNT1_L-I","",
+		"CPU0_UPHY4_PRSNT0_L-I","",
+		"","",
+		"I2C_RTC_ALERT_L-I","",
+		"FAN7_PRESENT_L-I","",
+		"FAN6_PRESENT_L-I","",
+		"FAN5_PRESENT_L-I","",
+		"FAN4_PRESENT_L-I","",
+		"FAN3_PRESENT_L-I","",
+		"FAN2_PRESENT_L-I","",
+		"IOBRD0_IOX_INT_L-I","",
+		"IOBRD1_PRSNT_L-I","",
+		"IOBRD0_PRSNT_L-I","",
+		"IOBRD1_PWR_GOOD-I","",
+		"IOBRD0_PWR_GOOD-I","",
+		"","",
+		"","",
+		"FAN_FAIL_IN_L-I","",
+		"","",
+		"","",
+		"","",
+		"PDB_CABLE_PRESENT_L-I","",
+		"","",
+		"CHASSIS_PWR_BRK_L-I","",
+		"","",
+		"IOBRD1_IOX_INT_L-I","",
+		"10GBE_SMBALRT_L-I","",
+		"PCIE_WAKE_L-I","",
+		"I2C_M21_ALERT_L-I","",
+		"I2C_M20_ALERT_L-I","",
+		"TRAY_FAST_SHDN_L-I","",
+		"UID_BTN_N-I","",
+		"PWR_BTN_L-I","",
+		"PSU_SMB_ALERT_L-I","",
+		"","",
+		"","",
+		"NODE_LOC_ID[0]-I","",
+		"NODE_LOC_ID[1]-I","",
+		"NODE_LOC_ID[2]-I","",
+		"NODE_LOC_ID[3]-I","",
+		"NODE_LOC_ID[4]-I","",
+		"NODE_LOC_ID[5]-I","",
+		"FAN10_PRESENT_L-I","",
+		"FAN9_PRESENT_L-I","",
+		"FAN8_PRESENT_L-I","",
+		"FPGA1_READY_HMC-I","",
+		"DP_HPD-I","",
+		"HMC_I2C3_FPGA_ALERT_L-I","",
+		"HMC_I2C2_FPGA_ALERT_L-I","",
+		"FPGA0_READY_HMC-I","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"LEAK_DETECT_ALERT_L-I","",
+		"MOD1_B2B_CABLE_PRESENT_L-I","",
+		"MOD1_CLINK_CABLE_PRESENT_L-I","",
+		"FAN11_PRESENT_L-I","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"RSVD_SGPIO_IN_CRC[0]","RSVD_SGPIO_O_CRC[7]",
+		"RSVD_SGPIO_IN_CRC[1]","RSVD_SGPIO_O_CRC[6]",
+		"RSVD_SGPIO_IN_CRC[2]","RSVD_SGPIO_O_CRC[5]",
+		"RSVD_SGPIO_IN_CRC[3]","RSVD_SGPIO_O_CRC[4]",
+		"RSVD_SGPIO_IN_CRC[4]","RSVD_SGPIO_O_CRC[3]",
+		"RSVD_SGPIO_IN_CRC[5]","RSVD_SGPIO_O_CRC[2]",
+		"RSVD_SGPIO_IN_CRC[6]","RSVD_SGPIO_O_CRC[1]",
+		"RSVD_SGPIO_IN_CRC[7]","RSVD_SGPIO_O_CRC[0]";
+};
+
+// I2C1, SSIF IPMI interface
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+// I2C2
+// BMC_I2C1_FPGA - Secondary FPGA
+// HMC EROT
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	multi-master;
+};
+
+// I2C3
+// BMC_I2C0_FPGA - Primary FPGA
+// HMC FRU EEPROM
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+	multi-master;
+};
+
+// I2C4
+&i2c3 {
+	status = "okay";
+};
+
+// I2C5
+// RTC Driver
+// IO Expander
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	// Module 0, Expander @0x21
+	exp4: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
+		gpio-line-names =
+			"RTC_MUX_SEL-O",
+			"PCI_MUX_SEL-O",
+			"TPM_MUX_SEL-O",
+			"FAN_MUX-SEL-O",
+			"SGMII_MUX_SEL-O",
+			"DP_MUX_SEL-O",
+			"UPHY3_USB_SEL-O",
+			"NCSI_MUX_SEL-O",
+			"BMC_PHY_RST-O",
+			"RTC_CLR_L-O",
+			"BMC_12V_CTRL-O",
+			"PS_RUN_IO0_PG-I",
+			"",
+			"",
+			"",
+			"";
+	};
+};
+
+// I2C6
+// Module 0/1 I2C MUX x3
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+	multi-master;
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x74>;
+				i2c-mux-idle-disconnect;
+
+				i2c17mux0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c17mux1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c17mux2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c17mux3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux20: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux21: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				vcc-supply = <&standby_power_regulator>;
+				gpio-line-names =
+					"RST_CX_0_L-O",
+					"RST_CX_1_L-O",
+					"CX0_SSD0_PRSNT_L-I",
+					"CX1_SSD1_PRSNT_L-I",
+					"CX_BOOT_CMPLT_CX0-I",
+					"CX_BOOT_CMPLT_CX1-I",
+					"CX_TWARN_CX0_L-I",
+					"CX_TWARN_CX1_L-I",
+					"CX_OVT_SHDN_CX0-I",
+					"CX_OVT_SHDN_CX1-I",
+					"FNP_L_CX0-O",
+					"FNP_L_CX1-O",
+					"",
+					"MCU_GPIO-I",
+					"MCU_RST_N-O",
+					"MCU_RECOVERY_N-O";
+			};
+		};
+
+		imux22: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux23: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x73>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+				vdd-supply = <&standby_power_regulator>;
+
+				i2c25mux0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c25mux1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c25mux2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c25mux3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux28: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux29: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x74>;
+				i2c-mux-idle-disconnect;
+
+				i2c29mux0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c29mux1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c29mux2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c29mux3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		imux30: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux31: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x76>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				vcc-supply = <&standby_power_regulator>;
+				gpio-line-names =
+					"SEC_RST_CX_0_L-O",
+					"SEC_RST_CX_1_L-O",
+					"SEC_CX0_SSD0_PRSNT_L-I",
+					"SEC_CX1_SSD1_PRSNT_L-I",
+					"SEC_CX_BOOT_CMPLT_CX0-I",
+					"SEC_CX_BOOT_CMPLT_CX1-I",
+					"SEC_CX_TWARN_CX0_L-I",
+					"SEC_CX_TWARN_CX1_L-I",
+					"SEC_CX_OVT_SHDN_CX0-I",
+					"SEC_CX_OVT_SHDN_CX1-I",
+					"SEC_FNP_L_CX0-O",
+					"SEC_FNP_L_CX1-O",
+					"",
+					"SEC_MCU_GPIO-I",
+					"SEC_MCU_RST_N-O",
+					"SEC_MCU_RECOVERY_N-O";
+				};
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux36: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux37: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux38: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux39: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+// I2C7
+// Module 0/1 Leak Sensors
+// Module 0/1 Fan Controllers
+&i2c6 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pmic@12 {
+		compatible = "ti,lm5066i";
+		reg = <0x12>;
+		shunt-resistor-micro-ohms = <190>;
+		status = "okay";
+	};
+
+	pmic@14 {
+		compatible = "ti,lm5066i";
+		reg = <0x14>;
+		shunt-resistor-micro-ohms = <190>;
+		status = "okay";
+	};
+
+	pwm@20 {
+		compatible = "maxim,max31790";
+		reg = <0x20>;
+	};
+
+	pwm@23 {
+		compatible = "maxim,max31790";
+		reg = <0x23>;
+	};
+
+	pwm@2c {
+		compatible = "maxim,max31790";
+		reg = <0x2c>;
+	};
+
+	pwm@2f {
+		compatible = "maxim,max31790";
+		reg = <0x2f>;
+	};
+};
+
+// I2C9
+// M.2
+&i2c8 {
+	status = "okay";
+	clock-frequency = <400000>;
+	multi-master;
+};
+
+// I2C10
+// HMC IO Expander
+// Module 0/1 IO Expanders
+&i2c9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	// Module 0, Expander @0x20
+	exp0: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
+		gpio-line-names =
+			"FPGA_THERM_OVERT_L-I",
+			"FPGA_READY_BMC-I",
+			"HMC_BMC_DETECT-O",
+			"HMC_PGOOD-O",
+			"",
+			"BMC_STBY_CYCLE-O",
+			"FPGA_EROT_FATAL_ERROR_L-I",
+			"WP_HW_EXT_CTRL_L-O",
+			"EROT_FPGA_RST_L-O",
+			"FPGA_EROT_RECOVERY_L-O",
+			"BMC_EROT_FPGA_SPI_MUX_SEL-O",
+			"USB_HUB_RESET_L-O",
+			"NCSI_CS1_SEL-O",
+			"SGPIO_EN_L-O",
+			"B2B_IOEXP_INT_L-I",
+			"I2C_BUS_MUX_RESET_L-O";
+	};
+
+	// Module 1, Expander @0x21
+	exp1: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
+		gpio-line-names =
+			"SEC_FPGA_THERM_OVERT_L-I",
+			"SEC_FPGA_READY_BMC-I",
+			"",
+			"",
+			"",
+			"",
+			"SEC_FPGA_EROT_FATAL_ERROR_L-I",
+			"SEC_WP_HW_EXT_CTRL_L-O",
+			"SEC_EROT_FPGA_RST_L-O",
+			"SEC_FPGA_EROT_RECOVERY_L-O",
+			"SEC_BMC_EROT_FPGA_SPI_MUX_SEL-O",
+			"SEC_USB2_HUB_RST_L-O",
+			"",
+			"",
+			"",
+			"SEC_I2C_BUS_MUX_RESET_L-O";
+	};
+
+	// HMC Expander @0x27
+	exp2: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"HMC_PRSNT_L-I",
+			"HMC_READY-I",
+			"HMC_EROT_FATAL_ERROR_L-I",
+			"I2C_MUX_SEL-O",
+			"HMC_EROT_SPI_MUX_SEL-O",
+			"HMC_EROT_RECOVERY_L-O",
+			"HMC_EROT_RST_L-O",
+			"GLOBAL_WP_HMC-O",
+			"FPGA_RST_L-O",
+			"USB2_HUB_RST-O",
+			"CPU_UART_MUX_SEL-O",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	// HMC Expander @0x74
+	exp3: gpio@74 {
+		compatible = "nxp,pca9555";
+		reg = <0x74>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
+		gpio-line-names =
+			"IOB_PRSNT_L",
+			"IOB_DP_HPD",
+			"IOX_BMC_RESET",
+			"IOB_IOEXP_INT_L",
+			"IOB_UID_LED_L",
+			"IOB_UID_BTN_L",
+			"IOB_SYS_RST_BTN_L",
+			"IOB_PWR_LED_L",
+			"IOB_PWR_BTN_L",
+			"IOB_PHY_RST",
+			"CPLD_JTAG_MUX_SEL",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+};
+
+// I2C11
+// BMC FRU EEPROM
+// BMC Temp Sensor
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	// BMC FRU EEPROM - 256 bytes
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+// I2C12
+&i2c11 {
+	status = "disabled";
+};
+
+// I2C13
+&i2c12 {
+	status = "disabled";
+};
+
+// I2C14
+// Module 0 UPHY3 SMBus
+&i2c13 {
+	status = "disabled";
+};
+
+// I2C15
+// Module 1 UPHY3 SMBus
+&i2c14 {
+	status = "okay";
+	clock-frequency = <100000>;
+	multi-master;
+
+	//E1.S drive slot 0-3
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		e1si2c0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		e1si2c1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		e1si2c2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		e1si2c3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+// I2C16
+&i2c15 {
+	status = "okay";
+	clock-frequency = <100000>;
+	multi-master;
+
+	//E1.S drive slot 4-7
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		e1si2c4: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		e1si2c5: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		e1si2c6: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		e1si2c7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&rng {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+		/*A0-A7*/ "", "", "", "", "", "", "", "",
+		/*B0-B7*/ "", "", "", "", "", "", "", "",
+		/*C0-C7*/ "SGPIO_I2C_MUX_SEL-O", "", "", "", "", "", "", "",
+		/*D0-D7*/ "", "", "", "UART1_MUX_SEL-O", "", "FPGA_PEX_RST_L-O", "", "",
+		/*E0-E7*/ "RTL8221_PHY_RST_L-O", "RTL8211_PHY_INT_L-I",	"", "UART3_MUX_SEL-O",
+					"", "", "", "SGPIO_BMC_EN-O",
+		/*F0-F7*/ "", "", "", "", "", "", "", "",
+		/*G0-G7*/ "", "", "", "", "", "", "", "",
+		/*H0-H7*/ "", "", "", "", "", "", "", "",
+		/*I0-I7*/ "", "", "", "", "", "QSPI2_RST_L-O", "GLOBAL_WP_BMC-O", "BMC_DDR4_TEN-O",
+		/*J0-J7*/ "", "", "", "", "", "", "", "",
+		/*K0-K7*/ "", "", "", "", "", "", "", "",
+		/*L0-L7*/ "", "", "", "", "", "", "", "",
+		/*M0-M7*/ "PCIE_EP_RST_EN-O", "BMC_FRU_WP-O", "FPGA_RST_L-O", "STBY_POWER_EN-O",
+					"STBY_POWER_PG-I", "PCIE_EP_RST_L-O", "", "",
+		/*N0-N7*/ "", "", "", "", "", "", "", "",
+		/*O0-O7*/ "", "", "", "", "", "", "", "",
+		/*P0-P7*/ "", "", "", "", "", "", "", "",
+		/*Q0-Q7*/ "", "", "", "", "", "", "", "",
+		/*R0-R7*/ "", "", "", "", "", "", "", "",
+		/*S0-S7*/ "", "", "", "", "", "", "", "",
+		/*T0-T7*/ "", "", "", "", "", "", "", "",
+		/*U0-U7*/ "", "", "", "", "", "", "", "",
+		/*V0-V7*/ "AP_EROT_REQ-O", "EROT_AP_GNT-I", "", "","PCB_TEMP_ALERT-I", "","", "",
+		/*W0-W7*/ "", "", "", "", "", "", "", "",
+		/*X0-X7*/ "", "", "TPM_MUX_SEL-O", "", "", "", "", "",
+		/*Y0-Y7*/ "", "", "", "EMMC_RST-O", "","", "", "",
+		/*Z0-Z7*/ "BMC_READY-O","", "", "", "", "", "", "";
+};
+
+&gpio1 {
+	/* 36 1.8V GPIOs */
+	gpio-line-names =
+		/*A0-A7*/ "", "", "", "", "", "", "", "",
+		/*B0-B7*/ "", "", "", "", "", "", "IO_EXPANDER_INT_L-I","",
+		/*C0-C7*/ "", "", "", "", "", "", "", "",
+		/*D0-D7*/ "", "", "", "", "", "", "SPI_HOST_TPM_RST_L-O", "SPI_BMC_FPGA_INT_L-I",
+		/*E0-E7*/ "", "", "", "", "", "", "", "";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
new file mode 100644
index 000000000000..9f2ad551255d
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Inventec Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Lanyang BMC";
+	compatible = "inventec,lanyang-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sys_boot_status {
+			label = "System_boot_status";
+			gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		attention {
+			label = "Attention_locator";
+			gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		plt_fault {
+			label = "Platform_fault";
+			gpios = <&gpio ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
+		};
+
+		hdd_fault {
+			label = "Onboard_drive_fault";
+			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_HIGH>;
+		};
+		bmc_err {
+			label = "BMC_fault";
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
+		};
+
+		sys_err {
+			label = "Sys_fault";
+			gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+		     &pinctrl_spi2cs0_default
+		     &pinctrl_spi2cs1_default
+		     &pinctrl_spi2miso_default
+		     &pinctrl_spi2mosi_default>;
+
+	flash@0 {
+		status = "okay";
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@55 {
+		compatible = "atmel,24c64";
+		reg = <0x55>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	tmp75@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&gpio {
+	pin-gpio-b0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_HDD1_PWR_EN";
+	};
+
+	pin-gpio-b5-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_USB1_OCI2";
+	};
+
+	pin-gpio-h5-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_CP0_PERST_ENABLE_R";
+	};
+
+	pin-gpio-z2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RST_PCA9546_U177_N";
+	};
+
+	pin-gpio-aa6-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_CP0_RESET_N";
+	};
+
+	pin-gpio-aa7-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_TPM_RESET_N";
+	};
+
+	pin-gpio-ab0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "BMC_USB_PWRON_N";
+	};
+};
+
+&ibt {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts
new file mode 100644
index 000000000000..6c8b966ffccc
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts
@@ -0,0 +1,667 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Mowgli BMC";
+	compatible = "ibm,mowgli-bmc", "aspeed,ast2500";
+
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-air-water {
+			label = "air-water";
+			gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 6)>;
+		};
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+
+		event-ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(Z, 2)>;
+		};
+
+		event-ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(Z, 0)>;
+		};
+
+		button-id {
+			label = "id-button";
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 1)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
+			linux,code = <11>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+
+		event-fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		front-fault {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		power-button {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		front-id {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		fan0 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
+		};
+
+		fan2 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
+		};
+
+		fan3 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
+		};
+
+		fan4 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon-12v {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>;
+	};
+
+	iio-hwmon-5v {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 1>;
+	};
+
+	iio-hwmon-3v {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 2>;
+	};
+
+	iio-hwmon-vdd {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 3>;
+	};
+
+	iio-hwmon-vcs {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 5>;
+	};
+
+	iio-hwmon-vdn {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 7>;
+	};
+
+	iio-hwmon-vio {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 9>;
+	};
+
+	iio-hwmon-vddra {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 11>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+
+	iio-hwmon-vddrb {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 13>;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default
+		&pinctrl_pwm4_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x1F80000 >;
+				label = "obmc-ubi";
+			};
+		};
+	};
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "alt-u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "alt-u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x1F80000 >;
+				label = "alt-obmc-ubi";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	/* APSS */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* CPU MFG CONN */
+
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* APSS */
+	/* CPLD */
+
+	/* PCA9516 (repeater) ->
+	 *    CLK Buffer 9FGS9092
+	 *    Power Supply 0
+	 *    Power Supply 1
+	 *    PCA 9552 LED
+	 */
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps1";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps1";
+		reg = <0x69>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* CP0 VDD & VCS : IR35221 */
+	/* CP0 VDN & VIO : IR35221 */
+	/* CP0 VDDR : IR35221 */
+
+	ir35221@28 {
+		compatible = "infineon,ir35221";
+		reg = <0x28>;
+	};
+
+	ir35221@29 {
+		compatible = "infineon,ir35221";
+		reg = <0x29>;
+	};
+
+	ir35221@2d {
+		compatible = "infineon,ir35221";
+		reg = <0x2d>;
+	};
+
+};
+
+&i2c5 {
+	status = "disabled";
+};
+
+&i2c6 {
+	status = "disabled";
+};
+
+&i2c7 {
+	status = "disabled";
+};
+
+&i2c8 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	/* PCIe G3 x16 slot */
+};
+
+&i2c10 {
+	status = "disabled";
+};
+
+&i2c11 {
+	status = "okay";
+
+	/* CPLD */
+	/* TPM */
+	/* RTC RX8900CE */
+	/* TMP275A */
+	/* TMP275A */
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+};
+
+&i2c12 {
+	status = "disabled";
+};
+
+&i2c13 {
+	status = "disabled";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	aspeed,alt-boot;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts
new file mode 100644
index 000000000000..ce6d30ddf07c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2019 YADRO
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Nicole BMC";
+	compatible = "yadro,nicole-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		coldfire_memory: codefire_memory@9ef00000 {
+			reg = <0x9ef00000 0x00100000>;
+			no-map;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "platform:green:power";
+			gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		identify {
+			label = "platform:blue:indicator";
+			gpios = <&gpio ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		fault {
+			label = "platform:red:fault";
+			gpios = <&gpio ASPEED_GPIO(AA, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		attention {
+			label = "platform:yellow:alarm";
+			gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "aspeed,ast2500-cf-fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		memory-region = <&coldfire_memory>;
+		aspeed,sram = <&sram>;
+		aspeed,cvic = <&cvic>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	/* CPU0 characterization connector */
+};
+
+&i2c3 {
+	status = "okay";
+	/* CLK GEN SI5338 */
+};
+
+&i2c4 {
+	status = "okay";
+	/* Voltage regulators for CPU0 */
+};
+
+&i2c5 {
+	status = "okay";
+	/* Voltage regulators for CPU1 */
+};
+
+&i2c6 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	/* CPLD */
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","bmc_power_up","sys_pwrok_buf",
+			"func_mode0","func_mode1","func_mode2","","",
+	/*E0-E7*/	"","ncsi_cfg","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","power-button","","","","","",
+	/*P0-P7*/	"","fsi-trans","pm_rtc_adc_en","","","","","",
+	/*Q0-Q7*/	"","","","","","","","id-button",
+	/*R0-R7*/	"","software_pwrgood","","","","","","",
+	/*S0-S7*/	"","","","","","","","seq_cont",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"fsi-clock","led-attention","fsi-data","led-fault",
+			"led-power","","","led-identify",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+
+	func-mode0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	func-mode1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	func-mode2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	seq-cont-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	ncsi-cfg-hog {
+		gpio-hog;
+		input;
+		gpios = <ASPEED_GPIO(E, 1) GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts
new file mode 100644
index 000000000000..7953059a6c67
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Palmetto BMC";
+	compatible = "tyan,palmetto-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@5f000000 {
+			no-map;
+			reg = <0x5f000000 0x01000000>; /* 16M */
+		};
+
+		coldfire_memory: codefire_memory@5ee00000 {
+			reg = <0x5ee00000 0x00200000>;
+			no-map;
+		};
+
+		flash_memory: region@5c000000 {
+			no-map;
+			reg = <0x5C000000 0x02000000>; /* 32MB */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "aspeed,ast2400-cf-fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		memory-region = <&coldfire_memory>;
+		aspeed,sram = <&sram>;
+		aspeed,cvic = <&cvic>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(A, 5) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(P, 5)>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1debug_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		label = "pnor";
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flbusy_default &pinctrl_flwp_default
+
+			&pinctrl_vgahs_default &pinctrl_vgavs_default
+			&pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+
+	rtc@68 {
+		compatible = "maxim,ds3231";
+		reg = <0x68>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	tmp423@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	occ-hwmon@50 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x50>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi>;
+};
+
+&gpio {
+	pin-func-mode0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "func_mode0";
+	};
+
+	pin-func-mode1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 5)  GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "func_mode1";
+	};
+
+	pin-func-mode2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "func_mode2";
+	};
+
+	pin-gpio-a0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_FAN_RESERVED_N";
+	};
+
+	pin-gpio-a1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "APSS_WDT_N";
+	};
+
+	pin-gpio-b1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "APSS_BOOT_MODE";
+	};
+
+	pin-gpio-b2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "APSS_RESET_N";
+	};
+
+	pin-gpio-b7-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SPIVID_STBY_RESET_N";
+	};
+
+	pin-gpio-d1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_POWER_UP";
+	};
+
+	pin-gpio-f1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_BATTERY_TEST";
+	};
+
+	pin-gpio-f4-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "AST_HW_FAULT_N";
+	};
+
+	pin-gpio-f5-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "AST_SYS_FAULT_N";
+	};
+
+	pin-gpio-f7-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_FULL_SPEED_N";
+	};
+
+	pin-gpio-g3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_FAN_ERROR_N";
+	};
+
+	pin-gpio-g4-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_WDT_RST1_P";
+	};
+
+	pin-gpio-g5-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_WDT_RST2_P";
+	};
+
+	pin-gpio-h0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "PE_SLOT_TEST_EN_N";
+	};
+
+	pin-gpio-h1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_RTCRST_N";
+	};
+
+	pin-gpio-h2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SYS_PWROK_BMC";
+	};
+
+	pin-gpio-h7-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_TPM_INT_N";
+	};
+};
+
+&fsi {
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "ibm,fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts
new file mode 100644
index 000000000000..a0263d969e51
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts
@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Romulus BMC";
+	compatible = "ibm,romulus-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		coldfire_memory: codefire_memory@9ef00000 {
+			reg = <0x9ef00000 0x00100000>;
+			no-map;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		power {
+			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "aspeed,ast2500-cf-fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		memory-region = <&coldfire_memory>;
+		aspeed,sram = <&sram>;
+		aspeed,cvic = <&cvic>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+
+		id-button {
+			label = "id-button";
+			gpios = <&gpio ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(Q, 7)>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	/* PCIe slot 1 (x8) */
+	status = "okay";
+};
+
+&i2c7 {
+	/* PCIe slot 2 (x16) */
+	status = "okay";
+};
+
+&i2c8 {
+	/* PCIe slot 3 (x16) */
+	status = "okay";
+};
+
+&i2c9 {
+	/* PCIe slot 4 (x16) */
+	status = "okay";
+};
+
+&i2c10 {
+	/* PCIe slot 5 (x8) */
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","nic_func_mode0","nic_func_mode1","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","power-button","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","led-fault","",
+				"led-identify","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","id-button",
+	/*R0-R7*/	"","","fsi-trans","","","led-power","","",
+	/*S0-S7*/	"","","","","","","","seq_cont",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"fsi-clock","","fsi-data","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+
+	nic-func-mode0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	nic-func-mode1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	seq-cont-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@4 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@5 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@6 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+};
+
+&ibt {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
new file mode 100644
index 000000000000..6fe7023599e8
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
@@ -0,0 +1,846 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Tacoma";
+	compatible = "ibm,tacoma-bmc", "aspeed,ast2600";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@b8000000 {
+			no-map;
+			reg = <0xb8000000 0x4000000>; /* 64M */
+		};
+
+		ramoops@bc000000 {
+			compatible = "ramoops";
+			reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;	/* 16M */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 3)>;
+		};
+
+		event-ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(E, 5)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+	};
+
+	iio-hwmon-dps310 {
+		compatible = "iio-hwmon";
+		io-channels = <&dps 0>;
+	};
+
+	iio-hwmon-bmp280 {
+		compatible = "iio-hwmon";
+		io-channels = <&bmp 1>;
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"fsi-mux","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"power-button","","","checkstop","","presence-ps1","","led-rear-fault",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","presence-ps0","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"led-rear-power","led-rear-id","","usb-power","","","","",
+	/*P0-P7*/	"","","","","","bmc-tpm-reset","","",
+	/*Q0-Q7*/	"cfam-reset","","","","","","","fsi-routing",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <36>, <270>;
+};
+
+&fsim0 {
+	status = "okay";
+
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+	fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;
+			};
+
+			cfam0_i2c2: i2c-bus@2 {
+				reg = <2>;
+			};
+
+			cfam0_i2c3: i2c-bus@3 {
+				reg = <3>;
+			};
+
+			cfam0_i2c4: i2c-bus@4 {
+				reg = <4>;
+			};
+
+			cfam0_i2c5: i2c-bus@5 {
+				reg = <5>;
+			};
+
+			cfam0_i2c6: i2c-bus@6 {
+				reg = <6>;
+			};
+
+			cfam0_i2c7: i2c-bus@7 {
+				reg = <7>;
+			};
+
+			cfam0_i2c8: i2c-bus@8 {
+				reg = <8>;
+			};
+
+			cfam0_i2c9: i2c-bus@9 {
+				reg = <9>;
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ {
+				compatible = "ibm,p9-occ";
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c0: i2c-bus@0 {
+				reg = <0>;
+			};
+
+			cfam1_i2c1: i2c-bus@1 {
+				reg = <1>;
+			};
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;
+			};
+
+			cfam1_i2c4: i2c-bus@4 {
+				reg = <4>;
+			};
+
+			cfam1_i2c5: i2c-bus@5 {
+				reg = <5>;
+			};
+
+			cfam1_i2c6: i2c-bus@6 {
+				reg = <6>;
+			};
+
+			cfam1_i2c7: i2c-bus@7 {
+				reg = <7>;
+			};
+
+			cfam1_i2c8: i2c-bus@8 {
+				reg = <8>;
+			};
+
+			cfam1_i2c9: i2c-bus@9 {
+				reg = <9>;
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;
+			};
+
+			cfam1_i2c12: i2c-bus@c {
+				reg = <12>;
+			};
+
+			cfam1_i2c13: i2c-bus@d {
+				reg = <13>;
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ {
+				compatible = "ibm,p9-occ";
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ0 {
+	reg = <1>;
+};
+
+&fsi_occ1 {
+	reg = <2>;
+};
+
+/ {
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c102 = &cfam0_i2c2;
+		i2c103 = &cfam0_i2c3;
+		i2c104 = &cfam0_i2c4;
+		i2c105 = &cfam0_i2c5;
+		i2c106 = &cfam0_i2c6;
+		i2c107 = &cfam0_i2c7;
+		i2c108 = &cfam0_i2c8;
+		i2c109 = &cfam0_i2c9;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c200 = &cfam1_i2c0;
+		i2c201 = &cfam1_i2c1;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c204 = &cfam1_i2c4;
+		i2c205 = &cfam1_i2c5;
+		i2c206 = &cfam1_i2c6;
+		i2c207 = &cfam1_i2c7;
+		i2c208 = &cfam1_i2c8;
+		i2c209 = &cfam1_i2c9;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c212 = &cfam1_i2c12;
+		i2c213 = &cfam1_i2c13;
+		i2c214 = &cfam1_i2c14;
+	};
+
+};
+
+&i2c0 {
+	multi-master;
+	status = "okay";
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	tpm: tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	bmp: bmp280@77 {
+		compatible = "bosch,bmp280";
+		reg = <0x77>;
+		#io-channel-cells = <1>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan@0 {
+			reg = <0>;
+		};
+
+		fan@1 {
+			reg = <1>;
+		};
+
+		fan@2 {
+			reg = <2>;
+		};
+
+		fan@3 {
+			reg = <3>;
+		};
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	pca0: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps1";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps1";
+		reg = <0x69>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
+			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
+			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
+			"GPU4_TH_OVERT_N_BUFF",	"GPU5_TH_OVERT_N_BUFF",
+			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
+			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
+			"GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
+			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	// Workaround for A0
+	compatible = "snps,dw-apb-uart";
+};
+
+&uart5 {
+	// Workaround for A0
+	compatible = "snps,dw-apb-uart";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&pinctrl {
+	/* Hog these as no driver is probed for the entire LPC block */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpc_default>,
+		    <&pinctrl_lsirq_default>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts
new file mode 100644
index 000000000000..8a7fb55ab489
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2019 YADRO
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Vesnin BMC";
+	compatible = "yadro,vesnin-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@5f000000 {
+			no-map;
+			reg = <0x5f000000 0x01000000>; /* 16MB */
+		};
+		flash_memory: region@5c000000 {
+			no-map;
+			reg = <0x5c000000 0x02000000>; /* 32M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_LOW>;
+		};
+		power_red {
+			gpios = <&gpio ASPEED_GPIO(N, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		power_green {
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		id_blue {
+			gpios = <&gpio ASPEED_GPIO(O, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		alarm_red {
+			gpios = <&gpio ASPEED_GPIO(N, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		alarm_yel {
+			gpios = <&gpio ASPEED_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			linux,code = <74>;
+			gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		event-identify {
+			label = "identify";
+			linux,code = <152>;
+			gpios = <&gpio ASPEED_GPIO(O, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+        label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt";
+	};
+};
+
+&spi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1debug_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+
+&uart5 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	tmp75@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	occ-hwmon@50 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x50>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	occ-hwmon@51 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x51>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	w83795g@2f {
+		compatible = "nuvoton,w83795g";
+		reg = <0x2f>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	occ-hwmon@56 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x56>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	occ-hwmon@57 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x57>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "maxim,ds3231";
+		reg = <0x68>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&wdt2 {
+	aspeed,alt-boot;
+};
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2_default>;
+	cd-inverted;
+	disable-wp;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
new file mode 100644
index 000000000000..89907b628b65
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
@@ -0,0 +1,695 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Witherspoon BMC";
+	compatible = "ibm,witherspoon-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		vga_memory: region@9f000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32MM */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-air-water {
+			label = "air-water";
+			gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(B, 5)>;
+		};
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+
+		event-ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(P, 7)>;
+		};
+
+		event-ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(N, 0)>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fan0 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		fan2 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		fan3 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		front-fault {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		front-power {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
+		};
+
+		front-id {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		rear-fault {
+			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-id {
+			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-power {
+			gpios = <&gpio ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		power-button {
+			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon-dps310 {
+		compatible = "iio-hwmon";
+		io-channels = <&dps 0>;
+	};
+
+	iio-hwmon-bmp280 {
+		compatible = "iio-hwmon";
+		io-channels = <&bmp 1>;
+	};
+
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
+	/*B0-B7*/	"","","","","","air-water","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","","","","","",
+	/*E0-E7*/	"fsi-data","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"presence-ps1","","led-rear-fault","led-rear-power",
+		        "led-rear-id","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","presence-ps0",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","fsi-trans","","","power-button","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"fsi-clock","","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x1F80000 >;
+				label = "obmc-ubi";
+			};
+		};
+	};
+
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "alt-u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "alt-u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x1F80000 >;
+				label = "alt-obmc-ubi";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	/* APSS */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* MUX ->
+	 *    Samtec 1
+	 *    Samtec 2
+	 */
+};
+
+&i2c3 {
+	status = "okay";
+
+	bmp: bmp280@77 {
+		compatible = "bosch,bmp280";
+		reg = <0x77>;
+		#io-channel-cells = <1>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	pca0: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps1";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps1";
+		reg = <0x69>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+
+&i2c5 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+};
+
+&i2c10 {
+	/* MUX
+	 *   -> PCIe Slot 3
+	 *   -> PCIe Slot 4
+	 */
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
+			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
+			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
+			"GPU4_TH_OVERT_N_BUFF",	"GPU5_TH_OVERT_N_BUFF",
+			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
+			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
+			"GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
+			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	aspeed,alt-boot;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
new file mode 100644
index 000000000000..af3a9d39d277
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
@@ -0,0 +1,576 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Zaius BMC";
+	compatible = "ingrasys,zaius-bmc", "aspeed,ast2500";
+
+	aliases {
+		i2c15 = &i2cpcie0;
+		i2c16 = &i2cpcie1;
+		i2c17 = &i2cpcie2;
+		i2c19 = &i2cpcie3;
+		i2c20 = &i2cpcie4;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+	};
+
+	onewire0 {
+		compatible = "w1-gpio";
+		gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+	};
+
+	onewire1 {
+		compatible = "w1-gpio";
+		gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+	};
+
+	onewire2 {
+		compatible = "w1-gpio";
+		gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	onewire3 {
+		compatible = "w1-gpio";
+		gpios = <&gpio ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 7)>;
+		};
+
+		event-pcie-e2b-present {
+			label = "pcie-e2b-present";
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(E, 7)>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sys_boot_status {
+			label = "System boot status";
+			gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		attention {
+			label = "Attention";
+			gpios = <&gpio ASPEED_GPIO(D, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		plt_fault {
+			label = "Platform fault";
+			gpios = <&gpio ASPEED_GPIO(D, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		hdd_fault {
+			label = "Onboard drive fault";
+			gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		trans-gpios = <&gpio ASPEED_GPIO(O, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		clock-gpios = <&gpio ASPEED_GPIO(G, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(G, 1) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(P, 6) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+		     &pinctrl_spi2cs0_default
+		     &pinctrl_spi2cs1_default
+		     &pinctrl_spi2miso_default
+		     &pinctrl_spi2mosi_default>;
+
+	flash@0 {
+		status = "okay";
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+
+	/* Power sequencer UCD90160 PMBUS @64h
+	 * FRU AT24C64D @50h
+	 * RTC PCF8523 @68h
+	 * Clock buffer 9DBL04 @6dh
+	 */
+};
+
+&i2c1 {
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2cpcie0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2cpcie1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2cpcie2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2ctpm: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	/* MUX1 PCA9546A @71h
+	 *   PCIe 0
+	 *   PCIe 1
+	 *   PCIe 2
+	 *   TPM header
+	 */
+};
+
+&i2c2 {
+	status = "disabled";
+
+	/* OCP Mezz Connector A (OOB SMBUS) */
+};
+
+&i2c3 {
+	status = "disabled";
+
+	/* OCP Mezz Connector A (PCIe slot SMBUS) */
+};
+
+&i2c4 {
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2cpcie3: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2cpcie4: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+
+	/* MUX1 PCA9546A @71h
+	 *   PCIe 3
+	 *   PCIe 4
+	 */
+};
+
+
+&i2c5 {
+	status = "disabled";
+
+	/* CPU0 PRM 0.7V */
+	/* CPU0 PRM 1.2V CH03 */
+	/* CPU0 PRM 0.8V */
+	/* CPU0 PRM 1.2V CH47 */
+};
+
+&i2c6 {
+	status = "disabled";
+
+	/* CPU1 PRM 0.7V */
+	/* CPU1 PRM 1.2V CH03 */
+	/* CPU1 PRM 0.8V */
+	/* CPU1 PRM 1.2V CH47 */
+};
+
+&i2c7 {
+	status = "okay";
+
+	pca9541a@70 {
+		compatible = "nxp,pca9541";
+		reg = <0x70>;
+
+		i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hotswap@54 {
+				compatible = "ti,lm5066i";
+				reg = <0x54>;
+			};
+		};
+
+	};
+
+	vrm@64 {
+		compatible = "isil,isl68137";
+		reg = <0x64>;
+	};
+
+	vrm@40 {
+		compatible = "isil,isl68137";
+		reg = <0x40>;
+	};
+
+	vrm@60 {
+		compatible = "isil,isl68137";
+		reg = <0x60>;
+	};
+
+	vrm@43 {
+		compatible = "infineon,ir38064";
+		reg = <0x43>;
+	};
+
+	vrm@41 {
+		compatible = "isil,isl68137";
+		reg = <0x41>;
+	};
+
+	/* Master selector PCA9541A @70h (other master: CPU0)
+	 *   LM5066I PMBUS @10h
+	 */
+
+	/*
+	 * Brick will be one of these types/addresses.  Depending
+	 * on the board SKU only one is actually present and will successfully
+	 * instantiate while the others will fail the probe operation.
+	 * These are the PVT (and presumably beyond) addresses:
+	 *    12V Quarter Brick DC/DC Converter Q54SJ12050 @6Ah
+	 *    12V Quarter Brick DC/DC Converter Q54SH12050 @30h
+	 */
+	power-brick@6a {
+		compatible = "delta,dps800";
+		reg = <0x6a>;
+	};
+	power-brick@30 {
+		compatible = "delta,dps800";
+		reg = <0x30>;
+	};
+
+	/* CPU0 VR ISL68137 0.7V, 0.96V PMBUS @64h */
+	/* CPU0 VR ISL68137 1.2V CH03 PMBUS @40h */
+	/* CPU0 VR ISL68137 0.8V PMBUS @60h */
+	/* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @43h */
+	/* CPU0 VR ISL68137 1.2V CH47 PMBUS @41h */
+	/* Master selector PCA9541A @70h (other master: CPU0)
+	 *   LM5066I PMBUS @10h
+	 */
+};
+
+&i2c8 {
+	status = "okay";
+
+	vrm@64 {
+		compatible = "isil,isl68137";
+		reg = <0x64>;
+	};
+
+	vrm@40 {
+		compatible = "isil,isl68137";
+		reg = <0x40>;
+	};
+
+	vrm@41 {
+		compatible = "isil,isl68137";
+		reg = <0x41>;
+	};
+
+	vrm@42 {
+		compatible = "infineon,ir38064";
+		reg = <0x42>;
+	};
+
+	vrm@60 {
+		compatible = "isil,isl68137";
+		reg = <0x60>;
+	};
+
+	/* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @64h */
+	/* CPU1 VR ISL68137 1.2V CH03 PMBUS @40h */
+	/* CPU1 VR ISL68137 1.2V CH47 PMBUS @41h */
+	/* CPU1 VR 1.0V IR38064 I2C @12h, PMBUS @42h */
+	/* CPU1 VR ISL68137 0.8V PMBUS @60h */
+};
+
+
+&i2c9 {
+	status = "disabled";
+
+	/* Fan board */
+};
+
+&i2c10 {
+	status = "disabled";
+};
+
+&i2c11 {
+	status = "disabled";
+
+	/* GPU sideband */
+};
+
+&i2c12 {
+	status = "disabled";
+};
+
+&i2c13 {
+	status = "disabled";
+
+	/* MUX PI3USB102
+	 *   CPU0 debug
+	 *   CPU1 debug
+	 */
+};
+
+&pinctrl {
+	pinctrl_gpioh_unbiased: gpioi_unbiased {
+		pins = "A8", "C7", "B7", "A7", "D7", "B6", "A6", "E7";
+		bias-disable;
+	};
+};
+
+&gpio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpioh_unbiased>;
+
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","","","led-sys-boot-status","led-attention",
+				"led-fault",
+	/*E0-E7*/	"","","","","","","","presence-pcie-e2b",
+	/*F0-F7*/	"","","","","","","","checkstop",
+	/*G0-G7*/	"fsi-clock","fsi-data","","","","","","",
+	/*H0-H7*/	"onewire0","onewire1","onewire2","onewire3","","","","",
+	/*I0-I7*/	"","","","power-button","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","iso_u164_en","","fsi-trans","",
+	/*P0-P7*/	"ncsi_mux_en_n","bmc_i2c2_sw_rst_n","","bmc_i2c5_sw_rst_n","",
+				"","fsi-mux","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","led-hdd-fault","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+
+	line-iso-u146-en-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+
+	ncsi-mux-en-n-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+
+	line-bmc-i2c2-sw-rst-n-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+
+	line-bmc-i2c5-sw-rst-n-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+};
+
+&ibt {
+	status = "okay";
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-portwell-neptune.dts
new file mode 100644
index 000000000000..a5e64ccc2b3a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-portwell-neptune.dts
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Portwell Neptune BMC";
+	compatible = "portwell,neptune-bmc", "aspeed,ast2500";
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+	};
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		postcode0 {
+			label = "BMC_UP";
+			gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		postcode1 {
+			label = "BMC_HB";
+			gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+		postcode2 {
+			label = "FAULT";
+			gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		};
+		// postcode3-7 are GPIOH3-H7
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart1 {
+	// Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart5 {
+	// BMC Console
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default
+		     &pinctrl_mdio1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii2_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>,
+		 <&syscon ASPEED_CLK_MAC2RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&i2c1 {
+	status = "okay";
+	// To PCIe slot SMBUS
+};
+
+&i2c2 {
+	status = "okay";
+	// To LAN I210
+};
+
+&i2c3 {
+	status = "okay";
+	// SMBus to COMe AB
+};
+
+&i2c4 {
+	status = "okay";
+	// I2C to COMe AB
+};
+
+&i2c5 {
+	status = "okay";
+// 	USB Debug card
+	pca9555@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+	};
+	tmp421@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts
new file mode 100644
index 000000000000..259ef3f54c5c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+
+/ {
+	model = "Qualcomm DC-SCM V1 BMC";
+	compatible = "qcom,dc-scm-v1-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+
+	/* Bootloader sets up the MAC to insert delay */
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+
+	use-ncsi;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <133000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <133000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <133000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BMC_FLASH_MUX_SEL","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"BMC_FWSPI_RST_N","","GPIO_1_BMC_3V3","","","","","",
+	/*O0-O7*/	"JTAG_MUX_A","JTAG_MUX_B","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","SCMFPGA_SPARE_GPIO1_3V3",
+			"SCMFPGA_SPARE_GPIO2_3V3","SCMFPGA_SPARE_GPIO3_3V3",
+			"SCMFPGA_SPARE_GPIO4_3V3","SCMFPGA_SPARE_GPIO5_3V3",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*A0-A7*/	"GPI_1_BMC_1V8","","","","","",
+			"SCMFPGA_SPARE_GPIO1_1V8","SCMFPGA_SPARE_GPIO2_1V8",
+	/*B0-B7*/	"SCMFPGA_SPARE_GPIO3_1V8","SCMFPGA_SPARE_GPIO4_1V8",
+			"SCMFPGA_SPARE_GPIO5_1V8","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","BMC_SPI1_RST_N","BIOS_FLASH_MUX_SEL","",
+			"","TPM2_PIRQ_N","TPM2_RST_N","",
+	/*E0-E7*/	"","","","","","","","";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-q71l.dts
new file mode 100644
index 000000000000..fed2791f5994
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-q71l.dts
@@ -0,0 +1,518 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Quanta Q71L BMC";
+	compatible = "quanta,q71l-bmc", "aspeed,ast2400";
+
+	aliases {
+		i2c14 = &i2c_pcie2;
+		i2c15 = &i2c_pcie3;
+		i2c16 = &i2c_pcie6;
+		i2c17 = &i2c_pcie7;
+		i2c18 = &i2c_pcie1;
+		i2c19 = &i2c_pcie4;
+		i2c20 = &i2c_pcie5;
+		i2c21 = &i2c_pcie8;
+		i2c22 = &i2c_pcie9;
+		i2c23 = &i2c_pcie10;
+		i2c24 = &i2c_ssd1;
+		i2c25 = &i2c_ssd2;
+		i2c26 = &i2c_psu4;
+		i2c27 = &i2c_psu1;
+		i2c28 = &i2c_psu3;
+		i2c29 = &i2c_psu2;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x8000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@47800000 {
+			no-map;
+			reg = <0x47800000 0x00800000>; /* 8MB */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 11>;
+	};
+
+	i2c1mux: i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* mux-gpios = <&sgpio 10 GPIO_ACTIVE_HIGH> */
+		i2c-parent = <&i2c1>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vgahs_default &pinctrl_vgavs_default
+			&pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
+};
+
+&p2a {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* temp2 inlet */
+	tmp75@4c {
+		compatible = "ti,tmp75";
+		reg = <0x4c>;
+	};
+
+	/* temp3 */
+	tmp75@4e {
+		compatible = "ti,tmp75";
+		reg = <0x4e>;
+	};
+
+	/* temp1 */
+	tmp75@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+
+	/* Baseboard FRU */
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+
+	/* FP FRU */
+	eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* 0: PCIe Slot 2,
+	 *    Slot 3,
+	 *    Slot 6,
+	 *    Slot 7
+	 */
+	i2c-mux@74 {
+		compatible = "nxp,pca9546";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;  /* may use mux@77 next. */
+
+		i2c_pcie2: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_pcie3: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_pcie6: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_pcie7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	/* 0: PCIe Slot 1,
+	 *    Slot 4,
+	 *    Slot 5,
+	 *    Slot 8,
+	 *    Slot 9,
+	 *    Slot 10,
+	 *    SSD 1,
+	 *    SSD 2
+	 */
+	i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;  /* may use mux@74 next. */
+
+		i2c_pcie1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_pcie4: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_pcie5: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_pcie8: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c_pcie9: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c_pcie10: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c_ssd1: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c_ssd2: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* BIOS FRU */
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* 0: PSU4
+	 *    PSU1
+	 *    PSU3
+	 *    PSU2
+	 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c_psu4: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			psu@59 {
+				compatible = "pmbus";
+				reg = <0x59>;
+			};
+		};
+
+		i2c_psu1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			psu@58 {
+				compatible = "pmbus";
+				reg = <0x58>;
+			};
+		};
+
+		i2c_psu3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			psu@58 {
+				compatible = "pmbus";
+				reg = <0x58>;
+			};
+		};
+
+		i2c_psu2: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			psu@59 {
+				compatible = "pmbus";
+				reg = <0x59>;
+			};
+		};
+	};
+
+	/* PDB FRU */
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	/* BMC FRU */
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		&pinctrl_pwm1_default
+		&pinctrl_pwm2_default
+		&pinctrl_pwm3_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+&i2c1mux {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Memory Riser 1 FRU */
+		eeprom@50 {
+			compatible = "atmel,24c02";
+			reg = <0x50>;
+		};
+
+		/* Memory Riser 2 FRU */
+		eeprom@51 {
+			compatible = "atmel,24c02";
+			reg = <0x51>;
+		};
+
+		/* Memory Riser 3 FRU */
+		eeprom@52 {
+			compatible = "atmel,24c02";
+			reg = <0x52>;
+		};
+
+		/* Memory Riser 4 FRU */
+		eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+		};
+	};
+
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Memory Riser 5 FRU */
+		eeprom@50 {
+			compatible = "atmel,24c02";
+			reg = <0x50>;
+		};
+
+		/* Memory Riser 6 FRU */
+		eeprom@51 {
+			compatible = "atmel,24c02";
+			reg = <0x51>;
+		};
+
+		/* Memory Riser 7 FRU */
+		eeprom@52 {
+			compatible = "atmel,24c02";
+			reg = <0x52>;
+		};
+
+		/* Memory Riser 8 FRU */
+		eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
new file mode 100644
index 000000000000..86451227847b
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Quanta Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Quanta S6Q BMC";
+	compatible = "quanta,s6q-bmc", "aspeed,ast2600";
+
+	aliases {
+		// bus 0
+		i2c20 = &SMB_HOST_DB2000_3V3AUX_SCL;
+		i2c21 = &U12_PCA9546_CH1;
+		i2c22 = &SMB_HOST_DB800_B_SCL;
+		i2c23 = &SMB_HOST_DB800_C_SCL;
+
+		// bus 1
+		i2c24 = &SMB_M2_P0_1V8AUX_SCL;
+		i2c25 = &SMB_M2_P1_1V8AUX_SCL;
+		i2c26 = &SMB_CPU_PIROM_3V3AUX_SCL;
+		i2c27 = &SMB_TEMP_3V3AUX_SCL;
+		i2c28 = &SMB_IPMB_3V3AUX_SSDSB_SCL;
+		i2c29 = &SMB_IPMB_3V3AUX_SCL;
+		i2c31 = &SMB_FB_SCL;
+
+		// bus 1 - Fan board
+		i2c32 = &SMB_IOEXP_SCL;
+		i2c33 = &SMB_PROGRAM_SCL;
+		i2c34 = &SMB_FB_SCL_CH2;
+		i2c35 = &SMB_FAN_SENSE_SCL;
+
+		// bus 6
+		i2c36 = &U197_PCA9546_CH0;
+		i2c37 = &U197_PCA9546_CH1;
+		i2c38 = &U197_PCA9546_CH2;
+		i2c39 = &U197_PCA9546_CH3;
+
+		//bus 7
+		i2c40 = &SMB_OCP_SFF_3V3AUX_SCL; //OCP1
+		i2c41 = &SMB_OCP_LFF_3V3AUX_SCL; //OCP2
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		BMC_HEARTBEAT_N {
+			label = "BMC_HEARTBEAT_N";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		BMC_LED_STATUS_AMBER_N {
+			label = "BMC_LED_STATUS_AMBER_N";
+			gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		FM_ID_LED_N {
+			label = "FM_ID_LED_N";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0 - A7*/	"", "", "", "", "", "", "", "",
+	/*B0 - B7*/	"", "", "", "", "", "", "", "",
+	/*C0 - C7*/	"", "", "", "", "", "", "", "",
+	/*D0 - D7*/	"", "", "", "", "", "", "", "",
+	/*E0 - E7*/	"", "", "", "", "", "", "", "",
+	/*F0 - F7*/	"PLTRST_N", "", "PWR_DEBUG_N", "", "", "", "", "",
+	/*G0 - G7*/	"", "", "", "", "", "", "", "",
+	/*H0 - H7*/	"", "", "", "", "", "", "", "",
+	/*I0 - I7*/	"", "", "", "", "", "", "", "",
+	/*J0 - J7*/	"", "", "", "", "", "", "", "",
+	/*K0 - K7*/	"", "", "", "", "", "", "", "",
+	/*L0 - L7*/	"", "", "", "", "PREQ_N", "TCK_MUX_SEL", "", "",
+	/*M0 - M7*/	"", "", "", "PWRGD_SYS_PWROK", "", "PRDY_N", "", "",
+	/*N0 - N7*/	"", "", "", "", "", "", "", "",
+	/*O0 - O7*/	"", "", "", "", "", "", "", "",
+	/*P0 - P7*/	"SYS_BMC_PWRBTN_R_N", "SYS_PWRBTN_N", "FM_MB_RST_BTN", "RST_BMC_RSTBTN_OUT_N", "", "", "", "",
+	/*Q0 - Q7*/	"", "", "", "", "", "", "", "",
+	/*R0 - R7*/	"", "", "", "", "", "", "", "",
+	/*S0 - S7*/	"", "", "", "FP_ID_BTN_SCM_N", "", "", "", "",
+	/*T0 - T7*/	"", "", "", "", "", "", "", "",
+	/*U0 - U7*/	"", "", "", "", "", "", "", "",
+	/*V0 - V7*/	"", "", "", "", "", "SMI", "", "",
+	/*W0 - W7*/	"", "", "", "", "", "", "", "",
+	/*X0 - X7*/	"", "", "", "", "", "", "", "",
+	/*Y0 - Y7*/	"", "", "", "", "", "", "", "",
+	/*Z0 - Z7*/	"FM_BMC_READY_N", "", "", "", "", "", "", "",
+	/*AA0 - AA7*/	"", "", "", "", "", "", "", "",
+	/*AB0 - AB7*/	"", "", "", "", "", "", "", "",
+	/*AC0 - AC7*/	"", "", "", "", "", "", "", "";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <48000>;
+	gpio-line-names =
+	/* SGPIO input lines */
+	/*IOA0-IOA7*/	"","", "SIO_POWER_GOOD","OA1", "XDP_PRST_N","", "","", "FM_SLPS3_PLD_N","", "FM_SLPS4_PLD_N","", "FM_BIOS_POST_CMPLT_BMC_N","", "FM_ADR_TRIGGER_N","OA7",
+	/*IOB0-IOB7*/	"FM_ADR_COMPLETE","", "FM_PMBUS_ALERT_B_EN","", "PSU0_PRESENT_N","", "PSU1_PRESENT_N","", "PSU0_VIN_BUF_GOOD","", "PSU01_VIN_BUF_GOOD","", "PWRGD_PS0_PWROK_R","", "PWRGD_PS1_PWROK_R","",
+	/*IOC0-IOC7*/	"PWRGD_PS_PWROK_PLD_R","", "CHASSIS_INTRUSION","", "BMC_MFG_MODE","", "FM_BMC_EN_DET_R","", "FM_ME_BT_DONE","", "CPU1_PRESENCE","", "CPU2_PRESENCE","", "IRQ_PSYS_CRIT_N","",
+	/*IOD0-IOD7*/	"","", "CPU1_THERMTRIP","", "CPU2_THERMTRIP","", "CPU1_MEM_THERM_EVENT","", "CPU2_MEM_THERM_EVENT","", "CPU1_VRHOT","", "CPU2_VRHOT","", "","",
+	/*IOE0-IOE7*/	"","", "CPU1_MEM_VRHOT","", "CPU2_MEM_VRHOT","", "","", "PCH_BMC_THERMTRIP","", "","", "","", "","",
+	/*IOF0-IOF7*/	"CPU_ERR0","", "CPU_ERR1","", "CPU_ERR2","", "","", "","", "CPU_CATERR","", "","", "","",
+	/*IOG0-IOG7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOH0-IOH7*/	"","", "FP_ID_BTN_R1_N","", "FP_RST_BTN_N","", "","", "","", "FP_PWR_BTN_PLD_N_R","", "","", "","",
+	/*IOI0-IOI7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOJ0-IOJ7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOK0-IOK7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOL0-IOL7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOM0-IOM7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*ION0-ION7*/	"","BMC_SW_HEARTBEAT_N_R", "","FP_LED_FAULT_N", "","FP_ID_LED_N", "","FM_BMC_RSTBTN_OUT_N", "","FM_THERMTRIP_DLY_LVC1_R_N", "","", "","RST_PCA9548_SENSOR_PLD_N", "","USB_OC1_REAR_N",
+	/*IOO0-IOO7*/	"","IRQ_TPM_SPI_N", "","", "","IRQ_PCH_SCI_WHEA_R_N", "","IRQ_BMC_PCH_NMI_R", "","H_CPU_NMI_LVC1_R_N", "","", "","", "","FM_JTAG_BMC_PLD_MUX_SEL",
+	/*IOP0-IOP7*/	"IP0","OP0", "","", "","", "","", "","", "","", "","", "IP7","OP7";
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&mdio2 {
+	status = "okay";
+
+	ethphy2: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	phy-mode = "rmii";
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default &pinctrl_spi2cs1_default
+		&pinctrl_spi2cs2_default>;
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi2:0";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA0>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA2>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	non-removable;
+	bus-width = <4>;
+	max-frequency = <100000000>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	U34_PWR_ADC@48 {
+		compatible = "ti,ads7830";
+		reg = <0x48>;
+	};
+
+	U35_PWR_ADC@4b {
+		compatible = "ti,ads7830";
+		reg = <0x4b>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		SMB_HOST_DB2000_3V3AUX_SCL: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		U12_PCA9546_CH1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		SMB_HOST_DB800_B_SCL: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		SMB_HOST_DB800_C_SCL: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	i2c-mux@59 {
+		compatible = "nxp,pca9848";
+		reg = <0x59>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		SMB_M2_P0_1V8AUX_SCL: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		SMB_M2_P1_1V8AUX_SCL: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		SMB_CPU_PIROM_3V3AUX_SCL: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		SMB_TEMP_3V3AUX_SCL: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			U163_tmp75@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			U114_tmp75@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		SMB_IPMB_3V3AUX_SSDSB_SCL: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			U4_tmp75@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+			U73_tmp75@4d {
+				compatible = "ti,tmp75";
+				reg = <0x4d>;
+			};
+		};
+
+		SMB_IPMB_3V3AUX_SCL: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+				pagesize = <32>;
+			};
+		};
+
+		SMB_FB_SCL: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-mux@77 {
+				compatible = "nxp,pca9546";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				SMB_IOEXP_SCL: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				SMB_PROGRAM_SCL: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				SMB_FB_SCL_CH2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				SMB_FAN_SENSE_SCL: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					Current_Meter_U2@45 {
+						compatible = "ti,ina219";
+						reg = <0x45>;
+						shunt-resistor = <1000>; /* = 1 mOhm */
+					};
+
+					Current_Meter_U3@44 {
+						compatible = "ti,ina219";
+						reg = <0x44>;
+						shunt-resistor = <1000>; /* = 1 mOhm */
+					};
+
+					TEMP_sensor_U2@4b {
+						compatible = "ti,tmp75";
+						reg = <0x4b>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	bus-frequency = <400000>;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* MB FRU (U173) @ 0xA2 */
+	mb_fru: eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	/* FP_U1 Inlet */
+	FP_U1_tmp75@4a {
+		compatible = "ti,tmp75";
+		reg = <0x4a>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		U197_PCA9546_CH0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		U197_PCA9546_CH1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			cpu0_pvccin@60 {
+				compatible = "renesas,raa229004";
+				reg = <0x60>;
+			};
+
+			cpu0_pvccinfaon@61 {
+				compatible = "isil,isl69260";
+				reg = <0x61>;
+			};
+
+			cpu0_pvccd_hv@63 {
+				compatible = "isil,isl69260";
+				reg = <0x63>;
+			};
+		};
+
+		U197_PCA9546_CH2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			cpu1_pvccin@72 {
+				compatible = "renesas,raa229004";
+				reg = <0x72>;
+			};
+
+			cpu1_pvccinfaon@74 {
+				compatible = "isil,isl69260";
+				reg = <0x74>;
+			};
+
+			cpu1_pvccd_hv@76 {
+				compatible = "isil,isl69260";
+				reg = <0x76>;
+			};
+		};
+
+		U197_PCA9546_CH3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		SMB_OCP_SFF_3V3AUX_SCL: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		SMB_OCP_LFF_3V3AUX_SCL: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+
+	/* SCM FRU (U19) @ 0xA2 */
+	scm_fru: eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	scm_tmp75_u4@4a {
+		compatible = "ti,tmp75";
+		reg = <0x4a>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-supermicro-x11spi.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-supermicro-x11spi.dts
new file mode 100644
index 000000000000..b961dff388d1
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-supermicro-x11spi.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 Super Micro Computer, Inc
+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+
+/ {
+	model = "X11SPI BMC";
+	compatible = "supermicro,x11spi-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@7f000000 {
+			no-map;
+			reg = <0x7f000000 0x01000000>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+};
+
+&gpio {
+    status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+    status = "okay";
+
+    pinctrl-names = "default";
+    pinctrl-0 = <&pinctrl_rmii1_default>;
+    clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+           <&syscon ASPEED_CLK_MAC1RCLK>;
+    clock-names = "MACCLK", "RCLK";
+    use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default
+			 &pinctrl_pwm6_default &pinctrl_pwm7_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s7106.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s7106.dts
new file mode 100644
index 000000000000..aff27c1d4b06
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s7106.dts
@@ -0,0 +1,528 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Tyan S7106 BMC";
+	compatible = "tyan,s7106-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		p2a_memory: region@987f0000 {
+			no-map;
+			reg = <0x987f0000 0x00010000>; /* 64KB */
+		};
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>; /* 16M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		label = "bmc";
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	/* RS-232 connector on header */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	/* Alternative to vuart to internally connect (route) to uart1
+	 * when vuart cannot be used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart4 {
+	/* Alternative to vuart to internally connect (route) to the
+	 * external port usually used by uart1 when vuart cannot be
+	 * used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart5 {
+	/* BMC "debug" (console) UART; connected to RS-232 connector
+	 * on header; selectable via jumpers as alternative to uart2
+	 */
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+
+	/* We enable the VUART here, but leave it in a state that does
+	 * not interfere with the SuperIO. The goal is to have both the
+	 * VUART and the SuperIO available and decide at runtime whether
+	 * the VUART should actually be used. For that reason, configure
+	 * an "invalid" IO address and an IRQ that is not used by the
+	 * BMC.
+	 */
+
+	aspeed,lpc-io-reg = <0xffff>;
+	aspeed,lpc-interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&p2a {
+	status = "okay";
+	memory-region = <&p2a_memory>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&adc {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+			&pinctrl_pwm1_default
+			&pinctrl_pwm3_default
+			&pinctrl_pwm4_default>;
+
+	/* CPU fan #0 */
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	/* CPU fan #1 */
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	/* PWM group for chassis fans #1, #2, #3 and #4  */
+	fan@2 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	/* PWM group for chassis fans #5 and #6  */
+	fan@6 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* Hardware monitor with temperature sensors */
+	nct7802@28 {
+		compatible = "nuvoton,nct7802";
+		reg = <0x28>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 { /* LTD */
+			reg = <0>;
+		};
+
+		channel@1 { /* RTD1 */
+			reg = <1>;
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@2 { /* RTD2 */
+			reg = <2>;
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@3 { /* RTD3 */
+			reg = <3>;
+			sensor-type = "temperature";
+		};
+	};
+
+	/* Also connected to:
+	 * - IPMB pin header
+	 * - CPU #0 memory error LED @ 0x3A
+	 * - CPU #1 memory error LED @ 0x3C
+	 */
+};
+
+&i2c1 {
+	/* Directly connected to PCH SMBUS #0 */
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* BMC EEPROM, incl. mainboard FRU */
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+
+	/* Also connected to:
+	 * - fan header
+	 * - mini-SAS HD connector
+	 * - SSATA SGPIO
+	 * - via switch (BMC_SMB3_PCH_IE_SML3_EN, active low)
+	 *   to PCH SMBUS #3
+	 */
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* PSU1 FRU @ 0xA0 */
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	/* PSU2 FRU @ 0xA2 */
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	/* PSU1 @ 0xB0 */
+	power-supply@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	/* PSU2 @ 0xB2 */
+	power-supply@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+
+	/* Also connected to:
+	 * - PCH SMBUS #1
+	 */
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* Connected to:
+	 * - PCH SMBUS #2
+	 */
+
+	/* Connected via switch to:
+	 * - CPU #0 channels ABC VDDQ @ 0x80
+	 * - CPU #0 channels DEF VDDQ @ 0x81
+	 * - CPU #1 channels ABC VDDQ @ 0x82
+	 * - CPU #1 channels DEF VDDQ @ 0x83
+	 * - CPU #0 VCCIO & VMCP @ 0x52
+	 * - CPU #1 VCCIO & VMCP @ 0x53
+	 * - CPU #0 VCCIN @ 0xC0
+	 * - CPU #0 VSA @ 0xC2
+	 * - CPU #1 VCCIN @ 0xC4
+	 * - CPU #1 VSA @ 0xC6
+	 * - J110
+	 */
+};
+
+&i2c5 {
+	status = "okay";
+
+	/* Connected via switch (PCH_BMC_SMB_SW_P) to:
+	 * - mainboard FRU @ 0xAE
+	 * - XDP connector
+	 * - ME debug header
+	 * - clock buffer @ 0xD8
+	 * - i2c4 via switch (PCH_VR_SMBUS_SW_P; controlled by PCH)
+	 * - PCH SMBUS
+	 */
+};
+
+&i2c6 {
+	status = "okay";
+
+	/* Connected via switch (BMC_PE_SMB_EN_1_N) to
+	 * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
+	 * - 0,0: PCIE slot 1, SMB #1
+	 * - 0,1: PCIE slot 1, SMB #2
+	 * - 1,0: PCIE slot 2, SMB #1
+	 * - 1,1: PCIE slot 2, SMB #2
+	 */
+
+	/* Connected via switch (BMC_PE_SMB_EN_2_N) to
+	 * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
+	 * - 0,0: OCP0 (A) SMB
+	 * - 0,1: OCP0 (C) SMB
+	 * - 1,0: OCP1 (A) SMB
+	 * - 1,1: NC
+	 */
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* Connected to:
+	 * - PCH SMBUS #4
+	 */
+};
+
+&i2c8 {
+	status = "okay";
+
+	/* Not connected */
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+/* Enable BMC VGA output to show an early (pre-BIOS) boot screen */
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+/* We're following the GPIO naming as defined at
+ * https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md.
+ *
+ * Notes on led-identify and id-button:
+ * - A physical button is connected to id-button which
+ *   triggers the clock on a D flip-flop. The /Q output of the
+ *   flip-flop drives its D input.
+ * - The flip-flop's Q output drives led-identify which is
+ *   connected to LEDs.
+ * - With that, every button press toggles the LED between on and off.
+ *
+ * Notes on power-, reset- and nmi- button and control:
+ * - The -button signals can be used to monitor physical buttons.
+ * - The -control signals can be used to actuate the specific
+ *   operation.
+ * - In hardware, the -button signals are connected to the -control
+ *   signals through drivers with the -control signals being
+ *   protected through diodes.
+ */
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0*/		"",
+	/*A1*/		"",
+	/*A2*/		"led-identify", /* in/out: BMC_IDLED_ON_N */
+	/*A3*/		"",
+	/*A4*/		"",
+	/*A5*/		"",
+	/*A6*/		"",
+	/*A7*/		"",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0*/		"",
+	/*C1*/		"",
+	/*C2*/		"",
+	/*C3*/		"",
+	/*C4*/		"id-button", /* in/out: BMC_IDBTN_IN_OUT_N */
+	/*C5*/		"post-complete", /* in: FM_BIOS_POST_CMPLT_N */
+	/*C6*/		"",
+	/*C7*/		"",
+	/*D0*/		"",
+	/*D1*/		"",
+	/*D2*/		"power-chassis-good", /* in: SYS_PWROK_BUF */
+	/*D3*/		"platform-reset", /* in: SYS_PLTRST_N */
+	/*D4*/		"",
+	/*D5*/		"",
+	/*D6*/		"",
+	/*D7*/		"",
+	/*E0*/		"power-button", /* in: BMC_PWBTN_IN_N */
+	/*E1*/		"power-chassis-control", /* out: BMC_PWRBTN_OUT_N */
+	/*E2*/		"reset-button", /* in: BMC_RSTBTN_IN_N */
+	/*E3*/		"reset-control", /* out: BMC_RSTBTN_OUT_N */
+	/*E4*/		"nmi-button", /* in: BMC_NMIBTN_IN_N */
+	/*E5*/		"nmi-control", /* out: BMC_NMIBTN_OUT_N */
+	/*E6*/		"",
+	/*E7*/		"led-heartbeat", /* out: BMC_HEARTBRAT_LED_N */
+	/*F0*/		"",
+	/*F1*/		"clear-cmos-control", /* out: BMC_CLR_CMOS_N */
+	/*F2*/		"",
+	/*F3*/		"",
+	/*F4*/		"led-fault", /* out: AST_HW_FAULT_N */
+	/*F5*/		"",
+	/*F6*/		"",
+	/*F7*/		"",
+	/*G0*/		"BMC_PE_SMB_EN_1_N", /* out */
+	/*G1*/		"BMC_PE_SMB_EN_2_N", /* out */
+	/*G2*/		"",
+	/*G3*/		"",
+	/*G4*/		"",
+	/*G5*/		"",
+	/*G6*/		"",
+	/*G7*/		"",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0*/		"",
+	/*Q1*/		"",
+	/*Q2*/		"",
+	/*Q3*/		"",
+	/*Q4*/		"BMC_PE_SMB_SW_BIT0", /* out */
+	/*Q5*/		"BMC_PE_SMB_SW_BIT1", /* out */
+	/*Q6*/		"",
+	/*Q7*/		"",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0*/		"",
+	/*AA1*/		"",
+	/*AA2*/		"",
+	/*AA3*/		"BMC_SMB3_PCH_IE_SML3_EN", /* out */
+	/*AA4*/		"",
+	/*AA5*/		"",
+	/*AA6*/		"",
+	/*AA7*/		"",
+	/*AB0-AB7*/	"","","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s8036.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s8036.dts
new file mode 100644
index 000000000000..f6c4549c0ac4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s8036.dts
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Tyan S8036 BMC";
+	compatible = "tyan,s8036-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		p2a_memory: region@987f0000 {
+			no-map;
+			reg = <0x987f0000 0x00010000>; /* 64KB */
+		};
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>; /* 16M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		label = "bmc";
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	/* RS-232 connector on header */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	/* Alternative to vuart to internally connect (route) to uart1
+	 * when vuart cannot be used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart4 {
+	/* Alternative to vuart to internally connect (route) to the
+	 * external port usually used by uart1 when vuart cannot be
+	 * used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart5 {
+	/* BMC "debug" (console) UART; connected to RS-232 connector
+	 * on header; selectable via jumpers as alternative to uart2
+	 */
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+
+	/* We enable the VUART here, but leave it in a state that does
+	 * not interfere with the SuperIO. The goal is to have both the
+	 * VUART and the SuperIO available and decide at runtime whether
+	 * the VUART should actually be used. For that reason, configure
+	 * an "invalid" IO address and an IRQ that is not used by the
+	 * BMC.
+	 */
+	aspeed,lpc-io-reg = <0xffff>;
+	aspeed,lpc-interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&p2a {
+	status = "okay";
+	memory-region = <&p2a_memory>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&adc {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+			&pinctrl_pwm1_default
+			&pinctrl_pwm3_default
+			&pinctrl_pwm4_default>;
+
+	/* CPU fan */
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	/* PWM group for chassis fans #1, #2, #3 and #4 */
+	fan@2 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	/* PWM group for chassis fans #5 and #6  */
+	fan@6 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+&i2c0 {
+	/* Directly connected to Sideband-Temperature Sensor Interface (APML) */
+	status = "okay";
+};
+
+&i2c1 {
+	/* Directly connected to IPMB HDR. */
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* BMC EEPROM, incl. mainboard FRU */
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+	/* Also connected to:
+	 * - BCM5720
+	 * - FPGA
+	 * - FAN HDR
+	 * - FPIO HDR
+	 */
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* PSU1 FRU @ 0xA0 */
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	/* PSU2 FRU @ 0xA2 */
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	/* PSU1 @ 0xB0 */
+	power-supply@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	/* PSU2 @ 0xB2 */
+	power-supply@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+	/* Hardware monitor with temperature sensors */
+	nct7802@28 {
+		compatible = "nuvoton,nct7802";
+		reg = <0x28>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 { /* LTD */
+			reg = <0>;
+			status = "okay";
+		};
+
+		channel@1 { /* RTD1 */
+			reg = <1>;
+			status = "okay";
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@2 { /* RTD2 */
+			reg = <2>;
+			status = "okay";
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@3 { /* RTD3 */
+			reg = <3>;
+			status = "okay";
+			sensor-type = "temperature";
+		};
+	};
+
+	/* Also connected to:
+	 * - PCA9544
+	 * - CLK BUFF
+	 * - OCP FRU
+	 */
+};
+
+&i2c6 {
+	status = "okay";
+	/* Connected to:
+	 * - PCA9548 @0xE0
+	 * - PCA9548 @0xE2
+	 * - PCA9544 @0xE4
+	 */
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* Connected to:
+	 * - PCH SMBUS #4
+	 */
+};
+
+&i2c8 {
+	status = "okay";
+
+	/* Not connected */
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+/* Enable BMC VGA output to show an early (pre-BIOS) boot screen */
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+/* We're following the GPIO naming as defined at
+ * https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md.
+ *
+ * Notes on led-identify and id-button:
+ * - A physical button is connected to id-button which
+ *   triggers the clock on a D flip-flop. The /Q output of the
+ *   flip-flop drives its D input.
+ * - The flip-flop's Q output drives led-identify which is
+ *   connected to LEDs.
+ * - With that, every button press toggles the LED between on and off.
+ *
+ * Notes on power-, reset- and nmi- button and control:
+ * - The -button signals can be used to monitor physical buttons.
+ * - The -control signals can be used to actuate the specific
+ *   operation.
+ * - In hardware, the -button signals are connected to the -control
+ *   signals through drivers with the -control signals being
+ *   protected through diodes.
+ */
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0*/		"",
+	/*A1*/		"",
+	/*A2*/		"led-identify", /* in/out: BMC_CHASSIS_ID_LED_L */
+	/*A3*/		"",
+	/*A4*/		"",
+	/*A5*/		"",
+	/*A6*/		"",
+	/*A7*/		"",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0*/		"",
+	/*D1*/		"",
+	/*D2*/		"power-chassis-good", /* in: PWR_GOOD_LED -- Check if this is Z3?*/
+	/*D3*/		"platform-reset", /* in: RESET_LED_L */
+	/*D4*/		"",
+	/*D5*/		"",
+	/*D6*/		"",
+	/*D7*/		"",
+	/*E0*/		"power-button", /* in: BMC_SYS_MON_PWR_BTN_L */
+	/*E1*/		"power-chassis-control", /* out: BMC_ASSERT_PWR_BTN */
+	/*E2*/		"reset-button", /* in: BMC_SYS_MOS_RST_BTN_L*/
+	/*E3*/		"reset-control", /* out: BMC_ASSERT_RST_BTN */
+	/*E4*/		"nmi-button", /* in: BMC_SYS_MON_NMI_BTN_L */
+	/*E5*/		"nmi-control", /* out: BMC_ASSERT_NMI_BTN */
+	/*E6*/		"TSI_RESERT",
+	/*E7*/		"led-heartbeat", /* out: BMC_GPIOE7 */
+	/*F0*/		"",
+	/*F1*/		"clear-cmos-control", /* out: BMC_ASSERT_CLR_CMOS_L */
+	/*F2*/		"",
+	/*F3*/		"",
+	/*F4*/		"led-fault", /* out: BMC_HWM_FAULT_LED_L */
+	/*F5*/		"BMC_SYS_FAULT_LED_L",
+	/*F6*/		"BMC_ASSERT_BIOS_WP_L",
+	/*F7*/		"",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0*/		"",
+	/*Q1*/		"",
+	/*Q2*/		"",
+	/*Q3*/		"",
+	/*Q4*/		"",
+	/*Q5*/		"",
+	/*Q6*/		"id-button", /* in: BMC_CHASSIS_ID_BTN_L */
+	/*Q7*/		"",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z2*/	"","","",
+	/*Z3*/		"post-complete", /* BMC_SYS_MON_PWROK */
+	/*Z4-Z7*/	"","","","",
+	/*AA0*/		"",
+	/*AA1*/		"",
+	/*AA2*/		"",
+	/*AA3*/		"",
+	/*AA4*/		"",
+	/*AA5*/		"",
+	/*AA6*/		"",
+	/*AA7*/		"BMC_ASSERT_BMC_READY",
+	/*AB0*/		"BMC_SPD_SEL",
+	/*AB1-AB7*/	"","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts
new file mode 100644
index 000000000000..7ab29129d1e4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2022 Ufispace Co., Ltd.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ufispace NCPLite BMC";
+	compatible = "ufispace,ncplite-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			      <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		fan-status-int-l {
+			label = "fan-status-int-l";
+			gpios = <&gpio0 ASPEED_GPIO(M, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(M, 2)>;
+		};
+
+		allpwr-good {
+			label = "allpwr-good";
+			gpios = <&gpio0 ASPEED_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(V, 4)>;
+		};
+
+		psu0-alert-n {
+			label = "psu0-alert-n";
+			gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(V, 1)>;
+		};
+
+		psu1-alert-n {
+			label = "psu1-alert-n";
+			gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(V, 2)>;
+		};
+
+		int-thermal-alert {
+			label = "int-thermal-alert";
+			gpios = <&gpio0 ASPEED_GPIO(P, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(P, 2)>;
+		};
+
+		cpu-caterr-l {
+			label = "cpu-caterr-l";
+			gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(N, 3)>;
+		};
+
+		cpu-thermtrip-l {
+			label = "cpu-thermtrip-l";
+			gpios = <&gpio0 ASPEED_GPIO(V, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(V, 5)>;
+		};
+
+		psu0-presence-l {
+			label = "psu0-presence-l";
+			gpios = <&gpio0 ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 6)>;
+		};
+
+		psu1-presence-l {
+			label = "psu1-presence-l";
+			gpios = <&gpio0 ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 7)>;
+		};
+
+		psu0-power-ok {
+			label = "psu0-power-ok";
+			gpios = <&gpio0 ASPEED_GPIO(M, 4) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(M, 4)>;
+		};
+
+		psu1-power-ok {
+			label = "psu1-power-ok";
+			gpios = <&gpio0 ASPEED_GPIO(M, 5) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(M, 5)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&fan_ioexp 2 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&fan_ioexp 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan2-presence {
+			label = "fan2-presence";
+			gpios = <&fan_ioexp 10 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		fan3-presence {
+			label = "fan3-presence";
+			gpios = <&fan_ioexp 14 GPIO_ACTIVE_LOW>;
+			linux,code = <14>;
+		};
+	};
+};
+
+&mac2 {
+	status = "okay";
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&lpc_reset {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&udc {
+	status = "okay";
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	lm75@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	lm75@49 {
+		compatible = "national,lm75";
+		reg = <0x49>;
+	};
+
+	lm86@4c {
+		compatible = "national,lm86";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	lm75@4f {
+		cpmpatible = "national,lm75";
+		reg = <0x4f>;
+	};
+
+	fan_ioexp: pca9535@20 {
+		compatible = "nxp,pca9535";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"","","presence-fan0","",
+		"","","presence-fan1","",
+		"","","presence-fan2","",
+		"","","presence-fan3","";
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <1>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <1>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+
+	lm75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"CPU_PWRGD","","","power-button","host0-ready","","presence-ps0","presence-ps1",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","reset-button","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"power-chassis-control0","power-chassis-control1","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","power-chassis-good","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-n110.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-n110.dts
new file mode 100644
index 000000000000..44b9853f6e63
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-n110.dts
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+/dts-v1/;
+
+#include "aspeed-bmc-vegman.dtsi"
+
+/ {
+	model = "YADRO VEGMAN N110 BMC";
+	compatible = "yadro,vegman-n110-bmc", "aspeed,ast2500";
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"CHASSIS_INTRUSION","CASE_OPEN_FAULT_RST","","","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","","","","",
+	/*F0-F7*/	"NMI_OUT","PCIE_NIC_ALERT","","","SKT0_FAULT_LED","","RST_RGMII_PHYRST_DNP","",
+	/*G0-G7*/	"CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","","IRQ_NMI_EVENT","","","",
+	/*H0-H7*/	"PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","_SPI2_BMC_CS_SEL",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"_SPI_RMM4_LITE_CS","","","","","","","",
+	/*S0-S7*/	"_SPI2_BMC_CS1","","","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","",
+	/*AA0-AA7*/	"","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE",
+	/*AB0-AB7*/	"FM_CPU_BMCINIT","NMI_BUTTON","ID_BUTTON","PS_PWROK","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&sgpio {
+	ngpios = <80>;
+	bus-frequency = <2000000>;
+	status = "okay";
+	/* SGPIO lines. even: input, odd: output */
+	gpio-line-names =
+	/*A0-A7*/	"CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","",
+	/*B0-B7*/	"CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","",
+	/*C0-C7*/	"","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","",
+	/*D0-D7*/	"","","","","","","","","","","","","","","","",
+	/*E0-E7*/	"","","","","","","","","","","","","","","","",
+	/*F0-F7*/	"SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","",
+	/*G0-G7*/	"MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","",
+	/*H0-H7*/	"","","","","","","","","","","","","","","","",
+	/*I0-I7*/	"","","","","","","","","","","","","","","","",
+	/*J0-J7*/	"","","","","","","","","","","","","","","","";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"", "", "", "", "", "", "PE_PCH_SCR_CLKREQ", "",
+		/*IO1.0-1.7*/	"", "PE_PCH_MEZ_PRSNT", "PE_PCH_MEZ_PRSNT_", "NIC_4_PE_PRSNT", "NIC_3_PE_PRSNT", "NIC_2_PE_PRSNT", "NIC_1_PE_PRSNT", "";
+	};
+	gpio@27 {
+		compatible = "nxp,pca9698";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX",
+		/*IO1.0-1.7*/	"PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0",
+		/*IO2.0-2.7*/	"PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "", "", "",
+		/*IO3.0-3.7*/	"", "", "", "", "", "", "", "",
+		/*IO4.0-4.7*/	"", "", "", "", "", "", "", "";
+	};
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	i2c-mux@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+	i2c-mux@73 {
+		compatible = "nxp,pca9545";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	i2c-mux@71 {
+		compatible = "nxp,pca9545";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x06>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01 0x08>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x09>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0A>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0B>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts
new file mode 100644
index 000000000000..98f3e0437704
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+/dts-v1/;
+
+#include "aspeed-bmc-vegman.dtsi"
+
+/ {
+	model = "YADRO VEGMAN Rx20 BMC";
+	compatible = "yadro,vegman-rx20-bmc", "aspeed,ast2500";
+
+	leds {
+		compatible = "gpio-leds";
+
+		temp_alarm {
+			label = "temp:red:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		temp_ok {
+			label = "temp:green:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		psu_fault {
+			label = "psu:red:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		psu_ok {
+			label = "psu:green:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"CASE_OPEN_DNP","CASE_OPEN_FAULT_RST_DNP","BEZEL_ON_PWR_P3V3","PWM_PWRGD_EXP_EN","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","LED_TEMP_STATUS_R","LED_TEMP_STATUS_G","LED_PWR_STATUS_R","LED_PWR_STATUS_G",
+	/*F0-F7*/	"NMI_OUT","CPU1_DISABLE_COD","","","SKT0_FAULT_LED_DNP","SKT1_FAULT_LED_DNP","RST_RGMII_PHYRST_DNP","",
+	/*G0-G7*/	"CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","SPI_BMC_BOOT_HD","IRQ_NMI_EVENT","SPI_BMC_BOOT_WP","SPI_BMC_BOOT_WP1","",
+	/*H0-H7*/	"PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"SEL_FLASH_SOFT","STATUS_SEL_BMC","","","BMC_WDT_P","ID_BUTTON","PS_PWROK","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","SPI_BIOS_ACTIVE_FLASH_SEL","STATUS_SEL_BIOS",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"_SPI_BMC_BOOT_CS1","","","","","","","",
+	/*S0-S7*/	"_SPI2_BMC_CS1","RSR_A_SMBEXP_RST_INT","RSR_B_SMBEXP_RST_INT","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","",
+	/*AA0-AA7*/	"CPU_CLK_MUX_SEL","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE",
+	/*AB0-AB7*/	"FM_CPU_BMCINIT","NMI_BUTTON","BMC_WDT_RST1","BMC_WDT_RST2","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&sgpio {
+	ngpios = <80>;
+	bus-frequency = <2000000>;
+	status = "okay";
+	/* SGPIO lines. even: input, odd: output */
+	gpio-line-names =
+	/*A0-A7*/	"CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","",
+	/*B0-B7*/	"CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","",
+	/*C0-C7*/	"","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","",
+	/*D0-D7*/	"","","","","","","","","","","","","","","","",
+	/*E0-E7*/	"","","","","","","","","","","","","","","","",
+	/*F0-F7*/	"SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","",
+	/*G0-G7*/	"MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","",
+	/*H0-H7*/	"","","","","","","","","","","","","","","","",
+	/*I0-I7*/	"","","","","","","","","","","","","","","","",
+	/*J0-J7*/	"","","","","","","","","","","","","","","","";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"ETH3_CLK_REQ", "ETH2_CLK_REQ", "RSR_A_PCIE_X16_2_PRSNT", "RSR_B_PCIE_X16_2_PRSNT", "", "RSR_B_PCIE_X8_3_PRSNT", "RSR_B_PCIE_X8_4_PRSNT", "RSR_B_PCIE_X16_PRSNT_N",
+		/*IO1.0-1.7*/	"RSR_B_PCIE_X8_2_PRSNT", "RSR_B_PCIE_X8_1_PRSNT", "NIC_1_PE_BUF_PRSNT", "RSR_A_PCIE_X16_PRSNT", "RSR_A_PCIE_X8_3_PRSNT", "RSR_A_PCIE_X8_2_PRSNT", "RSR_A_PCIE_X8_1_PRSNT_N", "";
+	};
+	gpio@23 {
+		compatible = "nxp,pcal9535";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "", "", "",
+		/*IO1.0-1.7*/	"", "", "", "", "", "", "", "";
+	};
+	gpio@27 {
+		compatible = "nxp,pca9698";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX",
+		/*IO1.0-1.7*/	"PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0",
+		/*IO2.0-2.7*/	"PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "PWRGD_PVCCIN_CPU1", "PWRGD_PVCCSA_CPU1", "PWRGD_PVCCIO_CPU1",
+		/*IO3.0-3.7*/	"PWRGD_PVMCP_CPU1", "PWRGD_P1V0_CPU1", "PWRGD_PVDDQ_GHJ_CPU1", "PWRGD_PVPP_GHJ_CPU1", "PWRGD_PVTT_GHJ_CPU1", "PWRGD_PVDDQ_KLM_CPU1", "PWRGD_PVPP_KLM_CPU1", "PWRGD_PVTT_KLM_CPU1",
+		/*IO4.0-4.7*/	"PCH_PWR_RESET_N", "FM_BOARD_SKU_ID0", "FM_BOARD_SKU_ID1", "FM_BOARD_SKU_ID2", "FM_BOARD_SKU_ID3", "FM_BOARD_SKU_ID4", "FM_BOARD_REV_ID0", "FM_BOARD_REV_ID1";
+	};
+	gpio@39 {
+		compatible = "nxp,pca9554";
+		reg = <0x39>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"FAN_FAULT_0", "FAN_FAULT_1", "FAN_FAULT_2", "FAN_FAULT_3", "FAN_FAULT_4", "FAN_FAULT_5", "FAN_FAULT_6", "";
+	};
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			i2c-mux@72 {
+				compatible = "nxp,pca9548";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+					eeprom@50 {
+						compatible = "atmel,24c64";
+						reg = <0x50>;
+						pagesize = <32>;
+						size = <8192>;
+						address-width = <16>;
+					};
+				};
+			};
+		};
+	};
+	i2c-mux@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			i2c-mux@72 {
+				compatible = "nxp,pca9548";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+					eeprom@50 {
+						compatible = "atmel,24c64";
+						reg = <0x50>;
+						pagesize = <32>;
+						size = <8192>;
+						address-width = <16>;
+					};
+				};
+			};
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+				size = <8192>;
+				address-width = <16>;
+			};
+		};
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default
+			 &pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x07>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01 0x08>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x09>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0A>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0B>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0C>;
+	};
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0D>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-sx20.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-sx20.dts
new file mode 100644
index 000000000000..933ca831d375
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-sx20.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+/dts-v1/;
+
+#include "aspeed-bmc-vegman.dtsi"
+
+/ {
+	model = "YADRO VEGMAN Sx20 BMC";
+	compatible = "yadro,vegman-sx20-bmc", "aspeed,ast2500";
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"CHASSIS_INTRUSION","CASE_OPEN_FAULT_RST","","","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","","","","",
+	/*F0-F7*/	"NMI_OUT","CPU1_DISABLE_COD","","","SKT0_FAULT_LED","SKT1_FAULT_LED","RST_RGMII_PHYRST_DNP","",
+	/*G0-G7*/	"CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","","IRQ_NMI_EVENT","","","",
+	/*H0-H7*/	"PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","BMC_GPU_RISER_ID1","BMC_GPU_RISER_ID0","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","_SPI2_BMC_CS_SEL",
+	/*P0-P7*/	"","P12V_HDDS_A_EN","P12V_HDDS_B_EN","P5V_HDDS_A_EN","PWRGD_P5V_HDDS_A","P5V_HDDS_B_EN","PWRGD_P5V_HDDS_B","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"_SPI_RMM4_LITE_CS","","","","","","","",
+	/*S0-S7*/	"_SPI2_BMC_CS1","","","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","",
+	/*AA0-AA7*/	"CPU_CLK_MUX_SEL","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE",
+	/*AB0-AB7*/	"FM_CPU_BMCINIT","NMI_BUTTON","ID_BUTTON","PS_PWROK","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&sgpio {
+	ngpios = <80>;
+	bus-frequency = <2000000>;
+	status = "okay";
+	/* SGPIO lines. even: input, odd: output */
+	gpio-line-names =
+	/*A0-A7*/	"CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","",
+	/*B0-B7*/	"CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","",
+	/*C0-C7*/	"","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","",
+	/*D0-D7*/	"","","","","","","","","","","","","","","","",
+	/*E0-E7*/	"","","","","","","","","","","","","","","","",
+	/*F0-F7*/	"SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","",
+	/*G0-G7*/	"MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","",
+	/*H0-H7*/	"","","","","","","","","","","","","","","","",
+	/*I0-I7*/	"","","","","","","","","","","","","","","","",
+	/*J0-J7*/	"","","","","","","","","","","","","","","","";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"", "", "CPU1_PE3_0_SLOT_PRSNT", "", "CPU1_PE1_GPU_PRSNT", "CPU1_PE3_1_SLOT_PRSNT", "PE_PCH_MEZ_PRSNT", "CPU0_PE3_1_SLOT_PRSNT",
+		/*IO1.0-1.7*/	"CPU0_PE1_GPU_PRSNT", "CPU0_PE2_NVME2_PRSNT", "CPU1_PE2_NVME3_PRSNT", "CPU1_PE2_SLOT_PRSNT", "CPU1_PE2_NVME4_PRSNT", "", "CPU0_PE2_NVME1_PRSNT", "CPU0_PE3_0_RAID_PRSNT";
+	};
+	gpio@27 {
+		compatible = "nxp,pca9698";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX",
+		/*IO1.0-1.7*/	"PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0",
+		/*IO2.0-2.7*/	"PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "PWRGD_PVCCIN_CPU1", "PWRGD_PVCCSA_CPU1", "PWRGD_PVCCIO_CPU1",
+		/*IO3.0-3.7*/	"PWRGD_PVMCP_CPU1", "PWRGD_P1V0_CPU1", "PWRGD_PVDDQ_GHJ_CPU1", "PWRGD_PVPP_GHJ_CPU1", "PWRGD_PVTT_GHJ_CPU1", "PWRGD_PVDDQ_KLM_CPU1", "PWRGD_PVPP_KLM_CPU1", "PWRGD_PVTT_KLM_CPU1",
+		/*IO4.0-4.7*/	"PWRGD_P5V_HDDS_A_R", "PWRGD_P5V_HDDS_B_R", "", "", "", "", "", "";
+	};
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	i2c-mux@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+	i2c-mux@73 {
+		compatible = "nxp,pca9545";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	i2c-mux@71 {
+		compatible = "nxp,pca9545";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default
+			 &pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi
new file mode 100644
index 000000000000..8c953e3a1d41
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		ramoops@9eff0000 {
+			compatible = "ramoops";
+			reg = <0x9eff0000 0x10000>;
+			record-size = <0x2000>;
+			console-size = <0x2000>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		identify {
+			label = "platform:blue:indicator";
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		status_amber {
+			label = "platform:red:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		status_green {
+			label = "platform:green:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(S, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		power_fault {
+			label = "platform:red:power";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		power_ok {
+			label = "platform:green:power";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(AA, 5) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&timer 5 1000000 0>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+			&pinctrl_spi2miso_default
+			&pinctrl_spi2mosi_default
+			&pinctrl_spi2cs0_default>;
+	flash@0 {
+		status = "okay";
+		label = "bios";
+		m25p,fast-read;
+	};
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			/* KSZ9131 */
+			compatible = "ethernet-phy-id0022.1640";
+			reg = <1>;
+
+			micrel,led-mode = <0>;
+		};
+	};
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2_default>;
+	disable-wp;
+};
+
+&timer {
+	fttmr010,pwm-outputs = <5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_timer5_default>;
+	#pwm-cells = <3>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xCA2>;
+	status = "okay";
+};
+
+&kcs4 {
+	aspeed,lpc-io-reg = <0xCA4>;
+	status = "okay";
+};
+
+&lpc_snoop {
+	snoop-ports = <0x80>;
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&i2c0 {
+	/* SMB_IPMB_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c1 {
+	/* SMB_CHASSENSOR_STBY_LVC3 */
+	status = "okay";
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	status = "okay";
+};
+
+&i2c3 {
+	/* SMB_HOST_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c4 {
+	/* BMC_PMBUS2_STBY */
+	status = "okay";
+};
+
+&i2c5 {
+	/* SMB_SMLINK0_STBY_LVC3 */
+	bus-frequency = <1000000>;
+	multi-master;
+	status = "okay";
+};
+
+&i2c6 {
+	/* SMB_TEMPSENSOR_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c7 {
+	/* SMB_SM_PMB1_SML1_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c9 {
+	/* SMB_BMC_ETH3_LVC3 */
+	status = "okay";
+};
+
+&i2c10 {
+	/* SMB_BMC_ETH2_LVC3 */
+	status = "okay";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		size = <8192>;
+		address-width = <16>;
+	};
+};
+
+&i2c12 {
+	/* SMB_BMC_FAULT_EXP_LVC3 */
+	status = "okay";
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
new file mode 100644
index 000000000000..c3d4d916c69b
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
@@ -0,0 +1,1441 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <dt-bindings/clock/aspeed-clock.h>
+
+/ {
+	model = "Aspeed BMC";
+	compatible = "aspeed,ast2400";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&vic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &vuart;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fmc: spi@1e620000 {
+			reg = <0x1e620000 0x94>, <0x20000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2400-fmc";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			interrupts = <19>;
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+			flash@2 {
+				reg = < 2 >;
+				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+			flash@3 {
+				reg = < 3 >;
+				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+			flash@4 {
+				reg = < 4 >;
+				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+		};
+
+		spi: spi@1e630000 {
+			reg = <0x1e630000 0x18>, <0x30000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2400-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		vic: interrupt-controller@1e6c0080 {
+			compatible = "aspeed,ast2400-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			valid-sources = <0xffffffff 0x0007ffff>;
+			reg = <0x1e6c0080 0x80>;
+		};
+
+		cvic: interrupt-controller@1e6c2000 {
+			compatible = "aspeed,ast2400-cvic", "aspeed,cvic";
+			valid-sources = <0x7fffffff>;
+			reg = <0x1e6c2000 0x80>;
+		};
+
+		mac0: ethernet@1e660000 {
+			compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
+			reg = <0x1e660000 0x180>;
+			interrupts = <2>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
+			status = "disabled";
+		};
+
+		mac1: ethernet@1e680000 {
+			compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
+			reg = <0x1e680000 0x180>;
+			interrupts = <3>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
+			status = "disabled";
+		};
+
+		ehci0: usb@1e6a1000 {
+			compatible = "aspeed,ast2400-ehci", "generic-ehci";
+			reg = <0x1e6a1000 0x100>;
+			interrupts = <5>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2h_default>;
+			status = "disabled";
+		};
+
+		uhci: usb@1e6b0000 {
+			compatible = "aspeed,ast2400-uhci", "generic-uhci";
+			reg = <0x1e6b0000 0x100>;
+			interrupts = <14>;
+			#ports = <3>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
+			status = "disabled";
+			/*
+			 * No default pinmux, it will follow EHCI, use an explicit pinmux
+			 * override if you don't enable EHCI
+			 */
+		};
+
+		vhub: usb-vhub@1e6a0000 {
+			compatible = "aspeed,ast2400-usb-vhub";
+			reg = <0x1e6a0000 0x300>;
+			interrupts = <5>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			aspeed,vhub-downstream-ports = <5>;
+			aspeed,vhub-generic-endpoints = <15>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2d_default>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon: syscon@1e6e2000 {
+				compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
+				reg = <0x1e6e2000 0x1a8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e6e2000 0x1000>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+
+				p2a: p2a-control@2c {
+					reg = <0x2c 0x4>;
+					compatible = "aspeed,ast2400-p2a-ctrl";
+					status = "disabled";
+				};
+
+				silicon-id@7c {
+					compatible = "aspeed,ast2400-silicon-id", "aspeed,silicon-id";
+					reg = <0x7c 0x4>;
+				};
+
+				pinctrl: pinctrl@80 {
+					reg = <0x80 0x18>, <0xa0 0x10>;
+					compatible = "aspeed,ast2400-pinctrl";
+				};
+			};
+
+			rng: hwrng@1e6e2078 {
+				compatible = "timeriomem_rng";
+				reg = <0x1e6e2078 0x4>;
+				period = <1>;
+				quality = <100>;
+			};
+
+			adc: adc@1e6e9000 {
+				compatible = "aspeed,ast2400-adc";
+				reg = <0x1e6e9000 0xb0>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			sram: sram@1e720000 {
+				compatible = "mmio-sram";
+				reg = <0x1e720000 0x8000>;	// 32K
+				ranges;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			video: video@1e700000 {
+				compatible = "aspeed,ast2400-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <7>;
+				status = "disabled";
+			};
+
+			sdmmc: sd-controller@1e740000 {
+				compatible = "aspeed,ast2400-sd-controller";
+				reg = <0x1e740000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e740000 0x10000>;
+				clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+				status = "disabled";
+
+				sdhci0: sdhci@100 {
+					compatible = "aspeed,ast2400-sdhci";
+					reg = <0x100 0x100>;
+					interrupts = <26>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+
+				sdhci1: sdhci@200 {
+					compatible = "aspeed,ast2400-sdhci";
+					reg = <0x200 0x100>;
+					interrupts = <26>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+			};
+
+			gpio: gpio@1e780000 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2400-gpio";
+				reg = <0x1e780000 0x1000>;
+				interrupts = <20>;
+				gpio-ranges = <&pinctrl 0 0 220>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			timer: timer@1e782000 {
+				/* This timer is a Faraday FTTMR010 derivative */
+				compatible = "aspeed,ast2400-timer";
+				reg = <0x1e782000 0x90>;
+				interrupts = <16 17 18 35 36 37 38 39>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				clock-names = "PCLK";
+			};
+
+			rtc: rtc@1e781000 {
+				compatible = "aspeed,ast2400-rtc";
+				reg = <0x1e781000 0x18>;
+				status = "disabled";
+			};
+
+			uart1: serial@1e783000 {
+				compatible = "ns16550a";
+				reg = <0x1e783000 0x20>;
+				reg-shift = <2>;
+				interrupts = <9>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
+				resets = <&lpc_reset 4>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart5: serial@1e784000 {
+				compatible = "ns16550a";
+				reg = <0x1e784000 0x20>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			wdt1: watchdog@1e785000 {
+				compatible = "aspeed,ast2400-wdt";
+				reg = <0x1e785000 0x1c>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+			};
+
+			wdt2: watchdog@1e785020 {
+				compatible = "aspeed,ast2400-wdt";
+				reg = <0x1e785020 0x1c>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+			};
+
+			pwm_tacho: pwm-tacho-controller@1e786000 {
+				compatible = "aspeed,ast2400-pwm-tacho";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1e786000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_24M>;
+				resets = <&syscon ASPEED_RESET_PWM>;
+				status = "disabled";
+			};
+
+			vuart: serial@1e787000 {
+				compatible = "aspeed,ast2400-vuart";
+				reg = <0x1e787000 0x40>;
+				reg-shift = <2>;
+				interrupts = <8>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			lpc: lpc@1e789000 {
+				compatible = "aspeed,ast2400-lpc-v2", "simple-mfd", "syscon";
+				reg = <0x1e789000 0x1000>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e789000 0x1000>;
+
+				lpc_ctrl: lpc-ctrl@80 {
+					compatible = "aspeed,ast2400-lpc-ctrl";
+					reg = <0x80 0x10>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_snoop: lpc-snoop@90 {
+					compatible = "aspeed,ast2400-lpc-snoop";
+					reg = <0x90 0x8>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lhc: lhc@a0 {
+					compatible = "aspeed,ast2400-lhc";
+					reg = <0xa0 0x24 0xc8 0x8>;
+				};
+
+				lpc_reset: reset-controller@98 {
+					compatible = "aspeed,ast2400-lpc-reset";
+					reg = <0x98 0x4>;
+					#reset-cells = <1>;
+				};
+
+				ibt: ibt@140 {
+					compatible = "aspeed,ast2400-ibt-bmc";
+					reg = <0x140 0x18>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				uart_routing: uart-routing@9c {
+					compatible = "aspeed,ast2400-uart-routing";
+					reg = <0x9c 0x4>;
+					status = "disabled";
+				};
+			};
+
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2400-peci";
+				reg = <0x1e78b000 0x60>;
+				interrupts = <15>;
+				clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
+			};
+
+			uart2: serial@1e78d000 {
+				compatible = "ns16550a";
+				reg = <0x1e78d000 0x20>;
+				reg-shift = <2>;
+				interrupts = <32>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
+				resets = <&lpc_reset 5>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart3: serial@1e78e000 {
+				compatible = "ns16550a";
+				reg = <0x1e78e000 0x20>;
+				reg-shift = <2>;
+				interrupts = <33>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
+				resets = <&lpc_reset 6>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart4: serial@1e78f000 {
+				compatible = "ns16550a";
+				reg = <0x1e78f000 0x20>;
+				reg-shift = <2>;
+				interrupts = <34>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
+				resets = <&lpc_reset 7>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			i2c: bus@1e78a000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e78a000 0x1000>;
+			};
+		};
+	};
+};
+
+&i2c {
+	i2c_ic: interrupt-controller@0 {
+		#interrupt-cells = <1>;
+		compatible = "aspeed,ast2400-i2c-ic";
+		reg = <0x0 0x40>;
+		interrupts = <12>;
+		interrupt-controller;
+	};
+
+	i2c0: i2c@40 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x40 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <0>;
+		interrupt-parent = <&i2c_ic>;
+		status = "disabled";
+		/* Does not need pinctrl properties */
+	};
+
+	i2c1: i2c@80 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x80 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <1>;
+		interrupt-parent = <&i2c_ic>;
+		status = "disabled";
+		/* Does not need pinctrl properties */
+	};
+
+	i2c2: i2c@c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0xc0 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <2>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_default>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@100 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x100 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <3>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4_default>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@140 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x140 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <4>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c5_default>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@180 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x180 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <5>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c6_default>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@1c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x1c0 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <6>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c7_default>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@300 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x300 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <7>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c8_default>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@340 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x340 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <8>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c9_default>;
+		status = "disabled";
+	};
+
+	i2c9: i2c@380 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x380 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <9>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c10_default>;
+		status = "disabled";
+	};
+
+	i2c10: i2c@3c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x3c0 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <10>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c11_default>;
+		status = "disabled";
+	};
+
+	i2c11: i2c@400 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x400 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <11>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c12_default>;
+		status = "disabled";
+	};
+
+	i2c12: i2c@440 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x440 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <12>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c13_default>;
+		status = "disabled";
+	};
+
+	i2c13: i2c@480 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x480 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <13>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c14_default>;
+		status = "disabled";
+	};
+};
+
+&pinctrl {
+	pinctrl_acpi_default: acpi_default {
+		function = "ACPI";
+		groups = "ACPI";
+	};
+
+	pinctrl_adc0_default: adc0_default {
+		function = "ADC0";
+		groups = "ADC0";
+	};
+
+	pinctrl_adc1_default: adc1_default {
+		function = "ADC1";
+		groups = "ADC1";
+	};
+
+	pinctrl_adc10_default: adc10_default {
+		function = "ADC10";
+		groups = "ADC10";
+	};
+
+	pinctrl_adc11_default: adc11_default {
+		function = "ADC11";
+		groups = "ADC11";
+	};
+
+	pinctrl_adc12_default: adc12_default {
+		function = "ADC12";
+		groups = "ADC12";
+	};
+
+	pinctrl_adc13_default: adc13_default {
+		function = "ADC13";
+		groups = "ADC13";
+	};
+
+	pinctrl_adc14_default: adc14_default {
+		function = "ADC14";
+		groups = "ADC14";
+	};
+
+	pinctrl_adc15_default: adc15_default {
+		function = "ADC15";
+		groups = "ADC15";
+	};
+
+	pinctrl_adc2_default: adc2_default {
+		function = "ADC2";
+		groups = "ADC2";
+	};
+
+	pinctrl_adc3_default: adc3_default {
+		function = "ADC3";
+		groups = "ADC3";
+	};
+
+	pinctrl_adc4_default: adc4_default {
+		function = "ADC4";
+		groups = "ADC4";
+	};
+
+	pinctrl_adc5_default: adc5_default {
+		function = "ADC5";
+		groups = "ADC5";
+	};
+
+	pinctrl_adc6_default: adc6_default {
+		function = "ADC6";
+		groups = "ADC6";
+	};
+
+	pinctrl_adc7_default: adc7_default {
+		function = "ADC7";
+		groups = "ADC7";
+	};
+
+	pinctrl_adc8_default: adc8_default {
+		function = "ADC8";
+		groups = "ADC8";
+	};
+
+	pinctrl_adc9_default: adc9_default {
+		function = "ADC9";
+		groups = "ADC9";
+	};
+
+	pinctrl_bmcint_default: bmcint_default {
+		function = "BMCINT";
+		groups = "BMCINT";
+	};
+
+	pinctrl_ddcclk_default: ddcclk_default {
+		function = "DDCCLK";
+		groups = "DDCCLK";
+	};
+
+	pinctrl_ddcdat_default: ddcdat_default {
+		function = "DDCDAT";
+		groups = "DDCDAT";
+	};
+
+	pinctrl_extrst_default: extrst_default {
+		function = "EXTRST";
+		groups = "EXTRST";
+	};
+
+	pinctrl_flack_default: flack_default {
+		function = "FLACK";
+		groups = "FLACK";
+	};
+
+	pinctrl_flbusy_default: flbusy_default {
+		function = "FLBUSY";
+		groups = "FLBUSY";
+	};
+
+	pinctrl_flwp_default: flwp_default {
+		function = "FLWP";
+		groups = "FLWP";
+	};
+
+	pinctrl_gpid_default: gpid_default {
+		function = "GPID";
+		groups = "GPID";
+	};
+
+	pinctrl_gpid0_default: gpid0_default {
+		function = "GPID0";
+		groups = "GPID0";
+	};
+
+	pinctrl_gpid2_default: gpid2_default {
+		function = "GPID2";
+		groups = "GPID2";
+	};
+
+	pinctrl_gpid4_default: gpid4_default {
+		function = "GPID4";
+		groups = "GPID4";
+	};
+
+	pinctrl_gpid6_default: gpid6_default {
+		function = "GPID6";
+		groups = "GPID6";
+	};
+
+	pinctrl_gpie0_default: gpie0_default {
+		function = "GPIE0";
+		groups = "GPIE0";
+	};
+
+	pinctrl_gpie2_default: gpie2_default {
+		function = "GPIE2";
+		groups = "GPIE2";
+	};
+
+	pinctrl_gpie4_default: gpie4_default {
+		function = "GPIE4";
+		groups = "GPIE4";
+	};
+
+	pinctrl_gpie6_default: gpie6_default {
+		function = "GPIE6";
+		groups = "GPIE6";
+	};
+
+	pinctrl_i2c10_default: i2c10_default {
+		function = "I2C10";
+		groups = "I2C10";
+	};
+
+	pinctrl_i2c11_default: i2c11_default {
+		function = "I2C11";
+		groups = "I2C11";
+	};
+
+	pinctrl_i2c12_default: i2c12_default {
+		function = "I2C12";
+		groups = "I2C12";
+	};
+
+	pinctrl_i2c13_default: i2c13_default {
+		function = "I2C13";
+		groups = "I2C13";
+	};
+
+	pinctrl_i2c14_default: i2c14_default {
+		function = "I2C14";
+		groups = "I2C14";
+	};
+
+	pinctrl_i2c3_default: i2c3_default {
+		function = "I2C3";
+		groups = "I2C3";
+	};
+
+	pinctrl_i2c4_default: i2c4_default {
+		function = "I2C4";
+		groups = "I2C4";
+	};
+
+	pinctrl_i2c5_default: i2c5_default {
+		function = "I2C5";
+		groups = "I2C5";
+	};
+
+	pinctrl_i2c6_default: i2c6_default {
+		function = "I2C6";
+		groups = "I2C6";
+	};
+
+	pinctrl_i2c7_default: i2c7_default {
+		function = "I2C7";
+		groups = "I2C7";
+	};
+
+	pinctrl_i2c8_default: i2c8_default {
+		function = "I2C8";
+		groups = "I2C8";
+	};
+
+	pinctrl_i2c9_default: i2c9_default {
+		function = "I2C9";
+		groups = "I2C9";
+	};
+
+	pinctrl_lpcpd_default: lpcpd_default {
+		function = "LPCPD";
+		groups = "LPCPD";
+	};
+
+	pinctrl_lpcpme_default: lpcpme_default {
+		function = "LPCPME";
+		groups = "LPCPME";
+	};
+
+	pinctrl_lpcrst_default: lpcrst_default {
+		function = "LPCRST";
+		groups = "LPCRST";
+	};
+
+	pinctrl_lpcsmi_default: lpcsmi_default {
+		function = "LPCSMI";
+		groups = "LPCSMI";
+	};
+
+	pinctrl_mac1link_default: mac1link_default {
+		function = "MAC1LINK";
+		groups = "MAC1LINK";
+	};
+
+	pinctrl_mac2link_default: mac2link_default {
+		function = "MAC2LINK";
+		groups = "MAC2LINK";
+	};
+
+	pinctrl_mdio1_default: mdio1_default {
+		function = "MDIO1";
+		groups = "MDIO1";
+	};
+
+	pinctrl_mdio2_default: mdio2_default {
+		function = "MDIO2";
+		groups = "MDIO2";
+	};
+
+	pinctrl_ncts1_default: ncts1_default {
+		function = "NCTS1";
+		groups = "NCTS1";
+	};
+
+	pinctrl_ncts2_default: ncts2_default {
+		function = "NCTS2";
+		groups = "NCTS2";
+	};
+
+	pinctrl_ncts3_default: ncts3_default {
+		function = "NCTS3";
+		groups = "NCTS3";
+	};
+
+	pinctrl_ncts4_default: ncts4_default {
+		function = "NCTS4";
+		groups = "NCTS4";
+	};
+
+	pinctrl_ndcd1_default: ndcd1_default {
+		function = "NDCD1";
+		groups = "NDCD1";
+	};
+
+	pinctrl_ndcd2_default: ndcd2_default {
+		function = "NDCD2";
+		groups = "NDCD2";
+	};
+
+	pinctrl_ndcd3_default: ndcd3_default {
+		function = "NDCD3";
+		groups = "NDCD3";
+	};
+
+	pinctrl_ndcd4_default: ndcd4_default {
+		function = "NDCD4";
+		groups = "NDCD4";
+	};
+
+	pinctrl_ndsr1_default: ndsr1_default {
+		function = "NDSR1";
+		groups = "NDSR1";
+	};
+
+	pinctrl_ndsr2_default: ndsr2_default {
+		function = "NDSR2";
+		groups = "NDSR2";
+	};
+
+	pinctrl_ndsr3_default: ndsr3_default {
+		function = "NDSR3";
+		groups = "NDSR3";
+	};
+
+	pinctrl_ndsr4_default: ndsr4_default {
+		function = "NDSR4";
+		groups = "NDSR4";
+	};
+
+	pinctrl_ndtr1_default: ndtr1_default {
+		function = "NDTR1";
+		groups = "NDTR1";
+	};
+
+	pinctrl_ndtr2_default: ndtr2_default {
+		function = "NDTR2";
+		groups = "NDTR2";
+	};
+
+	pinctrl_ndtr3_default: ndtr3_default {
+		function = "NDTR3";
+		groups = "NDTR3";
+	};
+
+	pinctrl_ndtr4_default: ndtr4_default {
+		function = "NDTR4";
+		groups = "NDTR4";
+	};
+
+	pinctrl_ndts4_default: ndts4_default {
+		function = "NDTS4";
+		groups = "NDTS4";
+	};
+
+	pinctrl_nri1_default: nri1_default {
+		function = "NRI1";
+		groups = "NRI1";
+	};
+
+	pinctrl_nri2_default: nri2_default {
+		function = "NRI2";
+		groups = "NRI2";
+	};
+
+	pinctrl_nri3_default: nri3_default {
+		function = "NRI3";
+		groups = "NRI3";
+	};
+
+	pinctrl_nri4_default: nri4_default {
+		function = "NRI4";
+		groups = "NRI4";
+	};
+
+	pinctrl_nrts1_default: nrts1_default {
+		function = "NRTS1";
+		groups = "NRTS1";
+	};
+
+	pinctrl_nrts2_default: nrts2_default {
+		function = "NRTS2";
+		groups = "NRTS2";
+	};
+
+	pinctrl_nrts3_default: nrts3_default {
+		function = "NRTS3";
+		groups = "NRTS3";
+	};
+
+	pinctrl_oscclk_default: oscclk_default {
+		function = "OSCCLK";
+		groups = "OSCCLK";
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		function = "PWM0";
+		groups = "PWM0";
+	};
+
+	pinctrl_pwm1_default: pwm1_default {
+		function = "PWM1";
+		groups = "PWM1";
+	};
+
+	pinctrl_pwm2_default: pwm2_default {
+		function = "PWM2";
+		groups = "PWM2";
+	};
+
+	pinctrl_pwm3_default: pwm3_default {
+		function = "PWM3";
+		groups = "PWM3";
+	};
+
+	pinctrl_pwm4_default: pwm4_default {
+		function = "PWM4";
+		groups = "PWM4";
+	};
+
+	pinctrl_pwm5_default: pwm5_default {
+		function = "PWM5";
+		groups = "PWM5";
+	};
+
+	pinctrl_pwm6_default: pwm6_default {
+		function = "PWM6";
+		groups = "PWM6";
+	};
+
+	pinctrl_pwm7_default: pwm7_default {
+		function = "PWM7";
+		groups = "PWM7";
+	};
+
+	pinctrl_rgmii1_default: rgmii1_default {
+		function = "RGMII1";
+		groups = "RGMII1";
+	};
+
+	pinctrl_rgmii2_default: rgmii2_default {
+		function = "RGMII2";
+		groups = "RGMII2";
+	};
+
+	pinctrl_rmii1_default: rmii1_default {
+		function = "RMII1";
+		groups = "RMII1";
+	};
+
+	pinctrl_rmii2_default: rmii2_default {
+		function = "RMII2";
+		groups = "RMII2";
+	};
+
+	pinctrl_rom16_default: rom16_default {
+		function = "ROM16";
+		groups = "ROM16";
+	};
+
+	pinctrl_rom8_default: rom8_default {
+		function = "ROM8";
+		groups = "ROM8";
+	};
+
+	pinctrl_romcs1_default: romcs1_default {
+		function = "ROMCS1";
+		groups = "ROMCS1";
+	};
+
+	pinctrl_romcs2_default: romcs2_default {
+		function = "ROMCS2";
+		groups = "ROMCS2";
+	};
+
+	pinctrl_romcs3_default: romcs3_default {
+		function = "ROMCS3";
+		groups = "ROMCS3";
+	};
+
+	pinctrl_romcs4_default: romcs4_default {
+		function = "ROMCS4";
+		groups = "ROMCS4";
+	};
+
+	pinctrl_rxd1_default: rxd1_default {
+		function = "RXD1";
+		groups = "RXD1";
+	};
+
+	pinctrl_rxd2_default: rxd2_default {
+		function = "RXD2";
+		groups = "RXD2";
+	};
+
+	pinctrl_rxd3_default: rxd3_default {
+		function = "RXD3";
+		groups = "RXD3";
+	};
+
+	pinctrl_rxd4_default: rxd4_default {
+		function = "RXD4";
+		groups = "RXD4";
+	};
+
+	pinctrl_salt1_default: salt1_default {
+		function = "SALT1";
+		groups = "SALT1";
+	};
+
+	pinctrl_salt2_default: salt2_default {
+		function = "SALT2";
+		groups = "SALT2";
+	};
+
+	pinctrl_salt3_default: salt3_default {
+		function = "SALT3";
+		groups = "SALT3";
+	};
+
+	pinctrl_salt4_default: salt4_default {
+		function = "SALT4";
+		groups = "SALT4";
+	};
+
+	pinctrl_sd1_default: sd1_default {
+		function = "SD1";
+		groups = "SD1";
+	};
+
+	pinctrl_sd2_default: sd2_default {
+		function = "SD2";
+		groups = "SD2";
+	};
+
+	pinctrl_sgpmck_default: sgpmck_default {
+		function = "SGPMCK";
+		groups = "SGPMCK";
+	};
+
+	pinctrl_sgpmi_default: sgpmi_default {
+		function = "SGPMI";
+		groups = "SGPMI";
+	};
+
+	pinctrl_sgpmld_default: sgpmld_default {
+		function = "SGPMLD";
+		groups = "SGPMLD";
+	};
+
+	pinctrl_sgpmo_default: sgpmo_default {
+		function = "SGPMO";
+		groups = "SGPMO";
+	};
+
+	pinctrl_sgpsck_default: sgpsck_default {
+		function = "SGPSCK";
+		groups = "SGPSCK";
+	};
+
+	pinctrl_sgpsi0_default: sgpsi0_default {
+		function = "SGPSI0";
+		groups = "SGPSI0";
+	};
+
+	pinctrl_sgpsi1_default: sgpsi1_default {
+		function = "SGPSI1";
+		groups = "SGPSI1";
+	};
+
+	pinctrl_sgpsld_default: sgpsld_default {
+		function = "SGPSLD";
+		groups = "SGPSLD";
+	};
+
+	pinctrl_sioonctrl_default: sioonctrl_default {
+		function = "SIOONCTRL";
+		groups = "SIOONCTRL";
+	};
+
+	pinctrl_siopbi_default: siopbi_default {
+		function = "SIOPBI";
+		groups = "SIOPBI";
+	};
+
+	pinctrl_siopbo_default: siopbo_default {
+		function = "SIOPBO";
+		groups = "SIOPBO";
+	};
+
+	pinctrl_siopwreq_default: siopwreq_default {
+		function = "SIOPWREQ";
+		groups = "SIOPWREQ";
+	};
+
+	pinctrl_siopwrgd_default: siopwrgd_default {
+		function = "SIOPWRGD";
+		groups = "SIOPWRGD";
+	};
+
+	pinctrl_sios3_default: sios3_default {
+		function = "SIOS3";
+		groups = "SIOS3";
+	};
+
+	pinctrl_sios5_default: sios5_default {
+		function = "SIOS5";
+		groups = "SIOS5";
+	};
+
+	pinctrl_siosci_default: siosci_default {
+		function = "SIOSCI";
+		groups = "SIOSCI";
+	};
+
+	pinctrl_spi1_default: spi1_default {
+		function = "SPI1";
+		groups = "SPI1";
+	};
+
+	pinctrl_spi1debug_default: spi1debug_default {
+		function = "SPI1DEBUG";
+		groups = "SPI1DEBUG";
+	};
+
+	pinctrl_spi1passthru_default: spi1passthru_default {
+		function = "SPI1PASSTHRU";
+		groups = "SPI1PASSTHRU";
+	};
+
+	pinctrl_spics1_default: spics1_default {
+		function = "SPICS1";
+		groups = "SPICS1";
+	};
+
+	pinctrl_timer3_default: timer3_default {
+		function = "TIMER3";
+		groups = "TIMER3";
+	};
+
+	pinctrl_timer4_default: timer4_default {
+		function = "TIMER4";
+		groups = "TIMER4";
+	};
+
+	pinctrl_timer5_default: timer5_default {
+		function = "TIMER5";
+		groups = "TIMER5";
+	};
+
+	pinctrl_timer6_default: timer6_default {
+		function = "TIMER6";
+		groups = "TIMER6";
+	};
+
+	pinctrl_timer7_default: timer7_default {
+		function = "TIMER7";
+		groups = "TIMER7";
+	};
+
+	pinctrl_timer8_default: timer8_default {
+		function = "TIMER8";
+		groups = "TIMER8";
+	};
+
+	pinctrl_txd1_default: txd1_default {
+		function = "TXD1";
+		groups = "TXD1";
+	};
+
+	pinctrl_txd2_default: txd2_default {
+		function = "TXD2";
+		groups = "TXD2";
+	};
+
+	pinctrl_txd3_default: txd3_default {
+		function = "TXD3";
+		groups = "TXD3";
+	};
+
+	pinctrl_txd4_default: txd4_default {
+		function = "TXD4";
+		groups = "TXD4";
+	};
+
+	pinctrl_uart6_default: uart6_default {
+		function = "UART6";
+		groups = "UART6";
+	};
+
+	pinctrl_usbcki_default: usbcki_default {
+		function = "USBCKI";
+		groups = "USBCKI";
+	};
+
+	pinctrl_usb2h_default: usb2h_default {
+		function = "USB2H1";
+		groups = "USB2H1";
+	};
+
+	pinctrl_usb2d_default: usb2d_default {
+		function = "USB2D1";
+		groups = "USB2D1";
+	};
+
+	pinctrl_vgabios_rom_default: vgabios_rom_default {
+		function = "VGABIOS_ROM";
+		groups = "VGABIOS_ROM";
+	};
+
+	pinctrl_vgahs_default: vgahs_default {
+		function = "VGAHS";
+		groups = "VGAHS";
+	};
+
+	pinctrl_vgavs_default: vgavs_default {
+		function = "VGAVS";
+		groups = "VGAVS";
+	};
+
+	pinctrl_vpi18_default: vpi18_default {
+		function = "VPI18";
+		groups = "VPI18";
+	};
+
+	pinctrl_vpi24_default: vpi24_default {
+		function = "VPI24";
+		groups = "VPI24";
+	};
+
+	pinctrl_vpi30_default: vpi30_default {
+		function = "VPI30";
+		groups = "VPI30";
+	};
+
+	pinctrl_vpo12_default: vpo12_default {
+		function = "VPO12";
+		groups = "VPO12";
+	};
+
+	pinctrl_vpo24_default: vpo24_default {
+		function = "VPO24";
+		groups = "VPO24";
+	};
+
+	pinctrl_wdtrst1_default: wdtrst1_default {
+		function = "WDTRST1";
+		groups = "WDTRST1";
+	};
+
+	pinctrl_wdtrst2_default: wdtrst2_default {
+		function = "WDTRST2";
+		groups = "WDTRST2";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
new file mode 100644
index 000000000000..39500bdb4747
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
@@ -0,0 +1,1638 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <dt-bindings/clock/aspeed-clock.h>
+#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
+
+/ {
+	model = "Aspeed BMC";
+	compatible = "aspeed,ast2500";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&vic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &vuart;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm1176jzf-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fmc: spi@1e620000 {
+			reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2500-fmc";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			interrupts = <19>;
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@2 {
+				reg = < 2 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		spi1: spi@1e630000 {
+			reg = <0x1e630000 0xc4>, <0x30000000 0x08000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2500-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		spi2: spi@1e631000 {
+			reg = <0x1e631000 0xc4>, <0x38000000 0x08000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2500-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		vic: interrupt-controller@1e6c0080 {
+			compatible = "aspeed,ast2400-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			valid-sources = <0xfefff7ff 0x0807ffff>;
+			reg = <0x1e6c0080 0x80>;
+		};
+
+		cvic: interrupt-controller@1e6c2000 {
+			compatible = "aspeed,ast2500-cvic", "aspeed,cvic";
+			valid-sources = <0xffffffff>;
+			copro-sw-interrupts = <1>;
+			reg = <0x1e6c2000 0x80>;
+		};
+
+		mac0: ethernet@1e660000 {
+			compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+			reg = <0x1e660000 0x180>;
+			interrupts = <2>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
+			status = "disabled";
+		};
+
+		mac1: ethernet@1e680000 {
+			compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+			reg = <0x1e680000 0x180>;
+			interrupts = <3>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
+			status = "disabled";
+		};
+
+		ehci0: usb@1e6a1000 {
+			compatible = "aspeed,ast2500-ehci", "generic-ehci";
+			reg = <0x1e6a1000 0x100>;
+			interrupts = <5>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ah_default>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1e6a3000 {
+			compatible = "aspeed,ast2500-ehci", "generic-ehci";
+			reg = <0x1e6a3000 0x100>;
+			interrupts = <13>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2bh_default>;
+			status = "disabled";
+		};
+
+		uhci: usb@1e6b0000 {
+			compatible = "aspeed,ast2500-uhci", "generic-uhci";
+			reg = <0x1e6b0000 0x100>;
+			interrupts = <14>;
+			#ports = <2>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
+			status = "disabled";
+			/*
+			 * No default pinmux, it will follow EHCI, use an explicit pinmux
+			 * override if you don't enable EHCI
+			 */
+		};
+
+		vhub: usb-vhub@1e6a0000 {
+			compatible = "aspeed,ast2500-usb-vhub";
+			reg = <0x1e6a0000 0x300>;
+			interrupts = <5>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			aspeed,vhub-downstream-ports = <5>;
+			aspeed,vhub-generic-endpoints = <15>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ad_default>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			edac: memory-controller@1e6e0000 {
+				compatible = "aspeed,ast2500-sdram-edac";
+				reg = <0x1e6e0000 0x174>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
+			syscon: syscon@1e6e2000 {
+				compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
+				reg = <0x1e6e2000 0x1a8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e6e2000 0x1000>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+
+				scu_ic: interrupt-controller@18 {
+					#interrupt-cells = <1>;
+					compatible = "aspeed,ast2500-scu-ic";
+					reg = <0x18 0x4>;
+					interrupts = <21>;
+					interrupt-controller;
+				};
+
+				p2a: p2a-control@2c {
+					compatible = "aspeed,ast2500-p2a-ctrl";
+					reg = <0x2c 0x4>;
+					status = "disabled";
+				};
+
+				silicon-id@7c {
+					compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id";
+					reg = <0x7c 0x4 0x150 0x8>;
+				};
+
+				pinctrl: pinctrl@80 {
+					compatible = "aspeed,ast2500-pinctrl";
+					reg = <0x80 0x18>, <0xa0 0x10>;
+					aspeed,external-nodes = <&gfx>, <&lhc>;
+				};
+			};
+
+			rng: hwrng@1e6e2078 {
+				compatible = "timeriomem_rng";
+				reg = <0x1e6e2078 0x4>;
+				period = <1>;
+				quality = <100>;
+			};
+
+			hace: crypto@1e6e3000 {
+				compatible = "aspeed,ast2500-hace";
+				reg = <0x1e6e3000 0x100>;
+				interrupts = <4>;
+				clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
+				resets = <&syscon ASPEED_RESET_HACE>;
+			};
+
+			gfx: display@1e6e6000 {
+				compatible = "aspeed,ast2500-gfx", "syscon";
+				reg = <0x1e6e6000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+				resets = <&syscon ASPEED_RESET_CRT1>;
+				syscon = <&syscon>;
+				status = "disabled";
+				interrupts = <0x19>;
+			};
+
+			adc: adc@1e6e9000 {
+				compatible = "aspeed,ast2500-adc";
+				reg = <0x1e6e9000 0xb0>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			video: video@1e700000 {
+				compatible = "aspeed,ast2500-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <7>;
+				status = "disabled";
+			};
+
+			sram: sram@1e720000 {
+				compatible = "mmio-sram";
+				reg = <0x1e720000 0x9000>;	// 36K
+				ranges;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			sdmmc: sd-controller@1e740000 {
+				compatible = "aspeed,ast2500-sd-controller";
+				reg = <0x1e740000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e740000 0x10000>;
+				clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+				status = "disabled";
+
+				sdhci0: sdhci@100 {
+					compatible = "aspeed,ast2500-sdhci";
+					reg = <0x100 0x100>;
+					interrupts = <26>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+
+				sdhci1: sdhci@200 {
+					compatible = "aspeed,ast2500-sdhci";
+					reg = <0x200 0x100>;
+					interrupts = <26>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+			};
+
+			gpio: gpio@1e780000 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2500-gpio";
+				reg = <0x1e780000 0x200>;
+				interrupts = <20>;
+				gpio-ranges = <&pinctrl 0 0 232>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sgpio: sgpio@1e780200 {
+				#gpio-cells = <2>;
+				compatible = "aspeed,ast2500-sgpio";
+				gpio-controller;
+				interrupts = <40>;
+				reg = <0x1e780200 0x0100>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				bus-frequency = <12000000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_sgpm_default>;
+				status = "disabled";
+			};
+
+			rtc: rtc@1e781000 {
+				compatible = "aspeed,ast2500-rtc";
+				reg = <0x1e781000 0x18>;
+				status = "disabled";
+			};
+
+			timer: timer@1e782000 {
+				/* This timer is a Faraday FTTMR010 derivative */
+				compatible = "aspeed,ast2400-timer";
+				reg = <0x1e782000 0x90>;
+				interrupts = <16 17 18 35 36 37 38 39>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				clock-names = "PCLK";
+			};
+
+			uart1: serial@1e783000 {
+				compatible = "ns16550a";
+				reg = <0x1e783000 0x20>;
+				reg-shift = <2>;
+				interrupts = <9>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
+				resets = <&lpc_reset 4>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart5: serial@1e784000 {
+				compatible = "ns16550a";
+				reg = <0x1e784000 0x20>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			wdt1: watchdog@1e785000 {
+				compatible = "aspeed,ast2500-wdt";
+				reg = <0x1e785000 0x20>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+			};
+
+			wdt2: watchdog@1e785020 {
+				compatible = "aspeed,ast2500-wdt";
+				reg = <0x1e785020 0x20>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+			};
+
+			wdt3: watchdog@1e785040 {
+				compatible = "aspeed,ast2500-wdt";
+				reg = <0x1e785040 0x20>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				status = "disabled";
+			};
+
+			pwm_tacho: pwm-tacho-controller@1e786000 {
+				compatible = "aspeed,ast2500-pwm-tacho";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1e786000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_24M>;
+				resets = <&syscon ASPEED_RESET_PWM>;
+				status = "disabled";
+			};
+
+			vuart: serial@1e787000 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e787000 0x40>;
+				reg-shift = <2>;
+				interrupts = <8>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			lpc: lpc@1e789000 {
+				compatible = "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon";
+				reg = <0x1e789000 0x1000>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e789000 0x1000>;
+
+				kcs1: kcs@24 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs2: kcs@28 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs3: kcs@2c {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs4: kcs@114 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_ctrl: lpc-ctrl@80 {
+					compatible = "aspeed,ast2500-lpc-ctrl";
+					reg = <0x80 0x10>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_snoop: lpc-snoop@90 {
+					compatible = "aspeed,ast2500-lpc-snoop";
+					reg = <0x90 0x8>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_reset: reset-controller@98 {
+					compatible = "aspeed,ast2500-lpc-reset";
+					reg = <0x98 0x4>;
+					#reset-cells = <1>;
+				};
+
+				uart_routing: uart-routing@9c {
+					compatible = "aspeed,ast2500-uart-routing";
+					reg = <0x9c 0x4>;
+					status = "disabled";
+				};
+
+				lhc: lhc@a0 {
+					compatible = "aspeed,ast2500-lhc";
+					reg = <0xa0 0x24 0xc8 0x8>;
+				};
+
+
+				ibt: ibt@140 {
+					compatible = "aspeed,ast2500-ibt-bmc";
+					reg = <0x140 0x18>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+			};
+
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2500-peci";
+				reg = <0x1e78b000 0x60>;
+				interrupts = <15>;
+				clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
+			};
+
+			uart2: serial@1e78d000 {
+				compatible = "ns16550a";
+				reg = <0x1e78d000 0x20>;
+				reg-shift = <2>;
+				interrupts = <32>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
+				resets = <&lpc_reset 5>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart3: serial@1e78e000 {
+				compatible = "ns16550a";
+				reg = <0x1e78e000 0x20>;
+				reg-shift = <2>;
+				interrupts = <33>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
+				resets = <&lpc_reset 6>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart4: serial@1e78f000 {
+				compatible = "ns16550a";
+				reg = <0x1e78f000 0x20>;
+				reg-shift = <2>;
+				interrupts = <34>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
+				resets = <&lpc_reset 7>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			i2c: bus@1e78a000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e78a000 0x1000>;
+			};
+		};
+	};
+};
+
+&i2c {
+	i2c_ic: interrupt-controller@0 {
+		#interrupt-cells = <1>;
+		compatible = "aspeed,ast2500-i2c-ic";
+		reg = <0x0 0x40>;
+		interrupts = <12>;
+		interrupt-controller;
+	};
+
+	i2c0: i2c@40 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x40 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <0>;
+		interrupt-parent = <&i2c_ic>;
+		status = "disabled";
+		/* Does not need pinctrl properties */
+	};
+
+	i2c1: i2c@80 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x80 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <1>;
+		interrupt-parent = <&i2c_ic>;
+		status = "disabled";
+		/* Does not need pinctrl properties */
+	};
+
+	i2c2: i2c@c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0xc0 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <2>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_default>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@100 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x100 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <3>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4_default>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@140 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x140 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <4>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c5_default>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@180 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x180 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <5>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c6_default>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@1c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x1c0 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <6>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c7_default>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@300 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x300 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <7>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c8_default>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@340 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x340 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <8>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c9_default>;
+		status = "disabled";
+	};
+
+	i2c9: i2c@380 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x380 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <9>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c10_default>;
+		status = "disabled";
+	};
+
+	i2c10: i2c@3c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x3c0 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <10>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c11_default>;
+		status = "disabled";
+	};
+
+	i2c11: i2c@400 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x400 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <11>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c12_default>;
+		status = "disabled";
+	};
+
+	i2c12: i2c@440 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x440 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <12>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c13_default>;
+		status = "disabled";
+	};
+
+	i2c13: i2c@480 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x480 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <13>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c14_default>;
+		status = "disabled";
+	};
+};
+
+&pinctrl {
+	pinctrl_acpi_default: acpi_default {
+		function = "ACPI";
+		groups = "ACPI";
+	};
+
+	pinctrl_adc0_default: adc0_default {
+		function = "ADC0";
+		groups = "ADC0";
+	};
+
+	pinctrl_adc1_default: adc1_default {
+		function = "ADC1";
+		groups = "ADC1";
+	};
+
+	pinctrl_adc10_default: adc10_default {
+		function = "ADC10";
+		groups = "ADC10";
+	};
+
+	pinctrl_adc11_default: adc11_default {
+		function = "ADC11";
+		groups = "ADC11";
+	};
+
+	pinctrl_adc12_default: adc12_default {
+		function = "ADC12";
+		groups = "ADC12";
+	};
+
+	pinctrl_adc13_default: adc13_default {
+		function = "ADC13";
+		groups = "ADC13";
+	};
+
+	pinctrl_adc14_default: adc14_default {
+		function = "ADC14";
+		groups = "ADC14";
+	};
+
+	pinctrl_adc15_default: adc15_default {
+		function = "ADC15";
+		groups = "ADC15";
+	};
+
+	pinctrl_adc2_default: adc2_default {
+		function = "ADC2";
+		groups = "ADC2";
+	};
+
+	pinctrl_adc3_default: adc3_default {
+		function = "ADC3";
+		groups = "ADC3";
+	};
+
+	pinctrl_adc4_default: adc4_default {
+		function = "ADC4";
+		groups = "ADC4";
+	};
+
+	pinctrl_adc5_default: adc5_default {
+		function = "ADC5";
+		groups = "ADC5";
+	};
+
+	pinctrl_adc6_default: adc6_default {
+		function = "ADC6";
+		groups = "ADC6";
+	};
+
+	pinctrl_adc7_default: adc7_default {
+		function = "ADC7";
+		groups = "ADC7";
+	};
+
+	pinctrl_adc8_default: adc8_default {
+		function = "ADC8";
+		groups = "ADC8";
+	};
+
+	pinctrl_adc9_default: adc9_default {
+		function = "ADC9";
+		groups = "ADC9";
+	};
+
+	pinctrl_bmcint_default: bmcint_default {
+		function = "BMCINT";
+		groups = "BMCINT";
+	};
+
+	pinctrl_ddcclk_default: ddcclk_default {
+		function = "DDCCLK";
+		groups = "DDCCLK";
+	};
+
+	pinctrl_ddcdat_default: ddcdat_default {
+		function = "DDCDAT";
+		groups = "DDCDAT";
+	};
+
+	pinctrl_espi_default: espi_default {
+		function = "ESPI";
+		groups = "ESPI";
+	};
+
+	pinctrl_fwspics1_default: fwspics1_default {
+		function = "FWSPICS1";
+		groups = "FWSPICS1";
+	};
+
+	pinctrl_fwspics2_default: fwspics2_default {
+		function = "FWSPICS2";
+		groups = "FWSPICS2";
+	};
+
+	pinctrl_gpid0_default: gpid0_default {
+		function = "GPID0";
+		groups = "GPID0";
+	};
+
+	pinctrl_gpid2_default: gpid2_default {
+		function = "GPID2";
+		groups = "GPID2";
+	};
+
+	pinctrl_gpid4_default: gpid4_default {
+		function = "GPID4";
+		groups = "GPID4";
+	};
+
+	pinctrl_gpid6_default: gpid6_default {
+		function = "GPID6";
+		groups = "GPID6";
+	};
+
+	pinctrl_gpie0_default: gpie0_default {
+		function = "GPIE0";
+		groups = "GPIE0";
+	};
+
+	pinctrl_gpie2_default: gpie2_default {
+		function = "GPIE2";
+		groups = "GPIE2";
+	};
+
+	pinctrl_gpie4_default: gpie4_default {
+		function = "GPIE4";
+		groups = "GPIE4";
+	};
+
+	pinctrl_gpie6_default: gpie6_default {
+		function = "GPIE6";
+		groups = "GPIE6";
+	};
+
+	pinctrl_i2c10_default: i2c10_default {
+		function = "I2C10";
+		groups = "I2C10";
+	};
+
+	pinctrl_i2c11_default: i2c11_default {
+		function = "I2C11";
+		groups = "I2C11";
+	};
+
+	pinctrl_i2c12_default: i2c12_default {
+		function = "I2C12";
+		groups = "I2C12";
+	};
+
+	pinctrl_i2c13_default: i2c13_default {
+		function = "I2C13";
+		groups = "I2C13";
+	};
+
+	pinctrl_i2c14_default: i2c14_default {
+		function = "I2C14";
+		groups = "I2C14";
+	};
+
+	pinctrl_i2c3_default: i2c3_default {
+		function = "I2C3";
+		groups = "I2C3";
+	};
+
+	pinctrl_i2c4_default: i2c4_default {
+		function = "I2C4";
+		groups = "I2C4";
+	};
+
+	pinctrl_i2c5_default: i2c5_default {
+		function = "I2C5";
+		groups = "I2C5";
+	};
+
+	pinctrl_i2c6_default: i2c6_default {
+		function = "I2C6";
+		groups = "I2C6";
+	};
+
+	pinctrl_i2c7_default: i2c7_default {
+		function = "I2C7";
+		groups = "I2C7";
+	};
+
+	pinctrl_i2c8_default: i2c8_default {
+		function = "I2C8";
+		groups = "I2C8";
+	};
+
+	pinctrl_i2c9_default: i2c9_default {
+		function = "I2C9";
+		groups = "I2C9";
+	};
+
+	pinctrl_lad0_default: lad0_default {
+		function = "LAD0";
+		groups = "LAD0";
+	};
+
+	pinctrl_lad1_default: lad1_default {
+		function = "LAD1";
+		groups = "LAD1";
+	};
+
+	pinctrl_lad2_default: lad2_default {
+		function = "LAD2";
+		groups = "LAD2";
+	};
+
+	pinctrl_lad3_default: lad3_default {
+		function = "LAD3";
+		groups = "LAD3";
+	};
+
+	pinctrl_lclk_default: lclk_default {
+		function = "LCLK";
+		groups = "LCLK";
+	};
+
+	pinctrl_lframe_default: lframe_default {
+		function = "LFRAME";
+		groups = "LFRAME";
+	};
+
+	pinctrl_lpchc_default: lpchc_default {
+		function = "LPCHC";
+		groups = "LPCHC";
+	};
+
+	pinctrl_lpcpd_default: lpcpd_default {
+		function = "LPCPD";
+		groups = "LPCPD";
+	};
+
+	pinctrl_lpcplus_default: lpcplus_default {
+		function = "LPCPLUS";
+		groups = "LPCPLUS";
+	};
+
+	pinctrl_lpcpme_default: lpcpme_default {
+		function = "LPCPME";
+		groups = "LPCPME";
+	};
+
+	pinctrl_lpcrst_default: lpcrst_default {
+		function = "LPCRST";
+		groups = "LPCRST";
+	};
+
+	pinctrl_lpcsmi_default: lpcsmi_default {
+		function = "LPCSMI";
+		groups = "LPCSMI";
+	};
+
+	pinctrl_lsirq_default: lsirq_default {
+		function = "LSIRQ";
+		groups = "LSIRQ";
+	};
+
+	pinctrl_mac1link_default: mac1link_default {
+		function = "MAC1LINK";
+		groups = "MAC1LINK";
+	};
+
+	pinctrl_mac2link_default: mac2link_default {
+		function = "MAC2LINK";
+		groups = "MAC2LINK";
+	};
+
+	pinctrl_mdio1_default: mdio1_default {
+		function = "MDIO1";
+		groups = "MDIO1";
+	};
+
+	pinctrl_mdio2_default: mdio2_default {
+		function = "MDIO2";
+		groups = "MDIO2";
+	};
+
+	pinctrl_ncts1_default: ncts1_default {
+		function = "NCTS1";
+		groups = "NCTS1";
+	};
+
+	pinctrl_ncts2_default: ncts2_default {
+		function = "NCTS2";
+		groups = "NCTS2";
+	};
+
+	pinctrl_ncts3_default: ncts3_default {
+		function = "NCTS3";
+		groups = "NCTS3";
+	};
+
+	pinctrl_ncts4_default: ncts4_default {
+		function = "NCTS4";
+		groups = "NCTS4";
+	};
+
+	pinctrl_ndcd1_default: ndcd1_default {
+		function = "NDCD1";
+		groups = "NDCD1";
+	};
+
+	pinctrl_ndcd2_default: ndcd2_default {
+		function = "NDCD2";
+		groups = "NDCD2";
+	};
+
+	pinctrl_ndcd3_default: ndcd3_default {
+		function = "NDCD3";
+		groups = "NDCD3";
+	};
+
+	pinctrl_ndcd4_default: ndcd4_default {
+		function = "NDCD4";
+		groups = "NDCD4";
+	};
+
+	pinctrl_ndsr1_default: ndsr1_default {
+		function = "NDSR1";
+		groups = "NDSR1";
+	};
+
+	pinctrl_ndsr2_default: ndsr2_default {
+		function = "NDSR2";
+		groups = "NDSR2";
+	};
+
+	pinctrl_ndsr3_default: ndsr3_default {
+		function = "NDSR3";
+		groups = "NDSR3";
+	};
+
+	pinctrl_ndsr4_default: ndsr4_default {
+		function = "NDSR4";
+		groups = "NDSR4";
+	};
+
+	pinctrl_ndtr1_default: ndtr1_default {
+		function = "NDTR1";
+		groups = "NDTR1";
+	};
+
+	pinctrl_ndtr2_default: ndtr2_default {
+		function = "NDTR2";
+		groups = "NDTR2";
+	};
+
+	pinctrl_ndtr3_default: ndtr3_default {
+		function = "NDTR3";
+		groups = "NDTR3";
+	};
+
+	pinctrl_ndtr4_default: ndtr4_default {
+		function = "NDTR4";
+		groups = "NDTR4";
+	};
+
+	pinctrl_nri1_default: nri1_default {
+		function = "NRI1";
+		groups = "NRI1";
+	};
+
+	pinctrl_nri2_default: nri2_default {
+		function = "NRI2";
+		groups = "NRI2";
+	};
+
+	pinctrl_nri3_default: nri3_default {
+		function = "NRI3";
+		groups = "NRI3";
+	};
+
+	pinctrl_nri4_default: nri4_default {
+		function = "NRI4";
+		groups = "NRI4";
+	};
+
+	pinctrl_nrts1_default: nrts1_default {
+		function = "NRTS1";
+		groups = "NRTS1";
+	};
+
+	pinctrl_nrts2_default: nrts2_default {
+		function = "NRTS2";
+		groups = "NRTS2";
+	};
+
+	pinctrl_nrts3_default: nrts3_default {
+		function = "NRTS3";
+		groups = "NRTS3";
+	};
+
+	pinctrl_nrts4_default: nrts4_default {
+		function = "NRTS4";
+		groups = "NRTS4";
+	};
+
+	pinctrl_oscclk_default: oscclk_default {
+		function = "OSCCLK";
+		groups = "OSCCLK";
+	};
+
+	pinctrl_pewake_default: pewake_default {
+		function = "PEWAKE";
+		groups = "PEWAKE";
+	};
+
+	pinctrl_pnor_default: pnor_default {
+		function = "PNOR";
+		groups = "PNOR";
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		function = "PWM0";
+		groups = "PWM0";
+	};
+
+	pinctrl_pwm1_default: pwm1_default {
+		function = "PWM1";
+		groups = "PWM1";
+	};
+
+	pinctrl_pwm2_default: pwm2_default {
+		function = "PWM2";
+		groups = "PWM2";
+	};
+
+	pinctrl_pwm3_default: pwm3_default {
+		function = "PWM3";
+		groups = "PWM3";
+	};
+
+	pinctrl_pwm4_default: pwm4_default {
+		function = "PWM4";
+		groups = "PWM4";
+	};
+
+	pinctrl_pwm5_default: pwm5_default {
+		function = "PWM5";
+		groups = "PWM5";
+	};
+
+	pinctrl_pwm6_default: pwm6_default {
+		function = "PWM6";
+		groups = "PWM6";
+	};
+
+	pinctrl_pwm7_default: pwm7_default {
+		function = "PWM7";
+		groups = "PWM7";
+	};
+
+	pinctrl_rgmii1_default: rgmii1_default {
+		function = "RGMII1";
+		groups = "RGMII1";
+	};
+
+	pinctrl_rgmii2_default: rgmii2_default {
+		function = "RGMII2";
+		groups = "RGMII2";
+	};
+
+	pinctrl_rmii1_default: rmii1_default {
+		function = "RMII1";
+		groups = "RMII1";
+	};
+
+	pinctrl_rmii2_default: rmii2_default {
+		function = "RMII2";
+		groups = "RMII2";
+	};
+
+	pinctrl_rxd1_default: rxd1_default {
+		function = "RXD1";
+		groups = "RXD1";
+	};
+
+	pinctrl_rxd2_default: rxd2_default {
+		function = "RXD2";
+		groups = "RXD2";
+	};
+
+	pinctrl_rxd3_default: rxd3_default {
+		function = "RXD3";
+		groups = "RXD3";
+	};
+
+	pinctrl_rxd4_default: rxd4_default {
+		function = "RXD4";
+		groups = "RXD4";
+	};
+
+	pinctrl_salt1_default: salt1_default {
+		function = "SALT1";
+		groups = "SALT1";
+	};
+
+	pinctrl_salt10_default: salt10_default {
+		function = "SALT10";
+		groups = "SALT10";
+	};
+
+	pinctrl_salt11_default: salt11_default {
+		function = "SALT11";
+		groups = "SALT11";
+	};
+
+	pinctrl_salt12_default: salt12_default {
+		function = "SALT12";
+		groups = "SALT12";
+	};
+
+	pinctrl_salt13_default: salt13_default {
+		function = "SALT13";
+		groups = "SALT13";
+	};
+
+	pinctrl_salt14_default: salt14_default {
+		function = "SALT14";
+		groups = "SALT14";
+	};
+
+	pinctrl_salt2_default: salt2_default {
+		function = "SALT2";
+		groups = "SALT2";
+	};
+
+	pinctrl_salt3_default: salt3_default {
+		function = "SALT3";
+		groups = "SALT3";
+	};
+
+	pinctrl_salt4_default: salt4_default {
+		function = "SALT4";
+		groups = "SALT4";
+	};
+
+	pinctrl_salt5_default: salt5_default {
+		function = "SALT5";
+		groups = "SALT5";
+	};
+
+	pinctrl_salt6_default: salt6_default {
+		function = "SALT6";
+		groups = "SALT6";
+	};
+
+	pinctrl_salt7_default: salt7_default {
+		function = "SALT7";
+		groups = "SALT7";
+	};
+
+	pinctrl_salt8_default: salt8_default {
+		function = "SALT8";
+		groups = "SALT8";
+	};
+
+	pinctrl_salt9_default: salt9_default {
+		function = "SALT9";
+		groups = "SALT9";
+	};
+
+	pinctrl_scl1_default: scl1_default {
+		function = "SCL1";
+		groups = "SCL1";
+	};
+
+	pinctrl_scl2_default: scl2_default {
+		function = "SCL2";
+		groups = "SCL2";
+	};
+
+	pinctrl_sd1_default: sd1_default {
+		function = "SD1";
+		groups = "SD1";
+	};
+
+	pinctrl_sd2_default: sd2_default {
+		function = "SD2";
+		groups = "SD2";
+	};
+
+	pinctrl_sda1_default: sda1_default {
+		function = "SDA1";
+		groups = "SDA1";
+	};
+
+	pinctrl_sda2_default: sda2_default {
+		function = "SDA2";
+		groups = "SDA2";
+	};
+
+	pinctrl_sgpm_default: sgpm_default {
+		function = "SGPM";
+		groups = "SGPM";
+	};
+
+	pinctrl_sgps1_default: sgps1_default {
+		function = "SGPS1";
+		groups = "SGPS1";
+	};
+
+	pinctrl_sgps2_default: sgps2_default {
+		function = "SGPS2";
+		groups = "SGPS2";
+	};
+
+	pinctrl_sioonctrl_default: sioonctrl_default {
+		function = "SIOONCTRL";
+		groups = "SIOONCTRL";
+	};
+
+	pinctrl_siopbi_default: siopbi_default {
+		function = "SIOPBI";
+		groups = "SIOPBI";
+	};
+
+	pinctrl_siopbo_default: siopbo_default {
+		function = "SIOPBO";
+		groups = "SIOPBO";
+	};
+
+	pinctrl_siopwreq_default: siopwreq_default {
+		function = "SIOPWREQ";
+		groups = "SIOPWREQ";
+	};
+
+	pinctrl_siopwrgd_default: siopwrgd_default {
+		function = "SIOPWRGD";
+		groups = "SIOPWRGD";
+	};
+
+	pinctrl_sios3_default: sios3_default {
+		function = "SIOS3";
+		groups = "SIOS3";
+	};
+
+	pinctrl_sios5_default: sios5_default {
+		function = "SIOS5";
+		groups = "SIOS5";
+	};
+
+	pinctrl_siosci_default: siosci_default {
+		function = "SIOSCI";
+		groups = "SIOSCI";
+	};
+
+	pinctrl_spi1_default: spi1_default {
+		function = "SPI1";
+		groups = "SPI1";
+	};
+
+	pinctrl_spi1cs1_default: spi1cs1_default {
+		function = "SPI1CS1";
+		groups = "SPI1CS1";
+	};
+
+	pinctrl_spi1debug_default: spi1debug_default {
+		function = "SPI1DEBUG";
+		groups = "SPI1DEBUG";
+	};
+
+	pinctrl_spi1passthru_default: spi1passthru_default {
+		function = "SPI1PASSTHRU";
+		groups = "SPI1PASSTHRU";
+	};
+
+	pinctrl_spi2ck_default: spi2ck_default {
+		function = "SPI2CK";
+		groups = "SPI2CK";
+	};
+
+	pinctrl_spi2cs0_default: spi2cs0_default {
+		function = "SPI2CS0";
+		groups = "SPI2CS0";
+	};
+
+	pinctrl_spi2cs1_default: spi2cs1_default {
+		function = "SPI2CS1";
+		groups = "SPI2CS1";
+	};
+
+	pinctrl_spi2miso_default: spi2miso_default {
+		function = "SPI2MISO";
+		groups = "SPI2MISO";
+	};
+
+	pinctrl_spi2mosi_default: spi2mosi_default {
+		function = "SPI2MOSI";
+		groups = "SPI2MOSI";
+	};
+
+	pinctrl_timer3_default: timer3_default {
+		function = "TIMER3";
+		groups = "TIMER3";
+	};
+
+	pinctrl_timer4_default: timer4_default {
+		function = "TIMER4";
+		groups = "TIMER4";
+	};
+
+	pinctrl_timer5_default: timer5_default {
+		function = "TIMER5";
+		groups = "TIMER5";
+	};
+
+	pinctrl_timer6_default: timer6_default {
+		function = "TIMER6";
+		groups = "TIMER6";
+	};
+
+	pinctrl_timer7_default: timer7_default {
+		function = "TIMER7";
+		groups = "TIMER7";
+	};
+
+	pinctrl_timer8_default: timer8_default {
+		function = "TIMER8";
+		groups = "TIMER8";
+	};
+
+	pinctrl_txd1_default: txd1_default {
+		function = "TXD1";
+		groups = "TXD1";
+	};
+
+	pinctrl_txd2_default: txd2_default {
+		function = "TXD2";
+		groups = "TXD2";
+	};
+
+	pinctrl_txd3_default: txd3_default {
+		function = "TXD3";
+		groups = "TXD3";
+	};
+
+	pinctrl_txd4_default: txd4_default {
+		function = "TXD4";
+		groups = "TXD4";
+	};
+
+	pinctrl_uart6_default: uart6_default {
+		function = "UART6";
+		groups = "UART6";
+	};
+
+	pinctrl_usbcki_default: usbcki_default {
+		function = "USBCKI";
+		groups = "USBCKI";
+	};
+
+	pinctrl_usb2ah_default: usb2ah_default {
+		function = "USB2AH";
+		groups = "USB2AH";
+	};
+
+	pinctrl_usb2ad_default: usb2ad_default {
+		function = "USB2AD";
+		groups = "USB2AD";
+	};
+
+	pinctrl_usb11bhid_default: usb11bhid_default {
+		function = "USB11BHID";
+		groups = "USB11BHID";
+	};
+
+	pinctrl_usb2bh_default: usb2bh_default {
+		function = "USB2BH";
+		groups = "USB2BH";
+	};
+
+	pinctrl_vgabiosrom_default: vgabiosrom_default {
+		function = "VGABIOSROM";
+		groups = "VGABIOSROM";
+	};
+
+	pinctrl_vgahs_default: vgahs_default {
+		function = "VGAHS";
+		groups = "VGAHS";
+	};
+
+	pinctrl_vgavs_default: vgavs_default {
+		function = "VGAVS";
+		groups = "VGAVS";
+	};
+
+	pinctrl_vpi24_default: vpi24_default {
+		function = "VPI24";
+		groups = "VPI24";
+	};
+
+	pinctrl_vpo_default: vpo_default {
+		function = "VPO";
+		groups = "VPO";
+	};
+
+	pinctrl_wdtrst1_default: wdtrst1_default {
+		function = "WDTRST1";
+		groups = "WDTRST1";
+	};
+
+	pinctrl_wdtrst2_default: wdtrst2_default {
+		function = "WDTRST2";
+		groups = "WDTRST2";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
new file mode 100644
index 000000000000..e87c4b58994a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
@@ -0,0 +1,1204 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+
+&pinctrl {
+	pinctrl_adc0_default: adc0_default {
+		function = "ADC0";
+		groups = "ADC0";
+	};
+
+	pinctrl_adc1_default: adc1_default {
+		function = "ADC1";
+		groups = "ADC1";
+	};
+
+	pinctrl_adc10_default: adc10_default {
+		function = "ADC10";
+		groups = "ADC10";
+	};
+
+	pinctrl_adc11_default: adc11_default {
+		function = "ADC11";
+		groups = "ADC11";
+	};
+
+	pinctrl_adc12_default: adc12_default {
+		function = "ADC12";
+		groups = "ADC12";
+	};
+
+	pinctrl_adc13_default: adc13_default {
+		function = "ADC13";
+		groups = "ADC13";
+	};
+
+	pinctrl_adc14_default: adc14_default {
+		function = "ADC14";
+		groups = "ADC14";
+	};
+
+	pinctrl_adc15_default: adc15_default {
+		function = "ADC15";
+		groups = "ADC15";
+	};
+
+	pinctrl_adc2_default: adc2_default {
+		function = "ADC2";
+		groups = "ADC2";
+	};
+
+	pinctrl_adc3_default: adc3_default {
+		function = "ADC3";
+		groups = "ADC3";
+	};
+
+	pinctrl_adc4_default: adc4_default {
+		function = "ADC4";
+		groups = "ADC4";
+	};
+
+	pinctrl_adc5_default: adc5_default {
+		function = "ADC5";
+		groups = "ADC5";
+	};
+
+	pinctrl_adc6_default: adc6_default {
+		function = "ADC6";
+		groups = "ADC6";
+	};
+
+	pinctrl_adc7_default: adc7_default {
+		function = "ADC7";
+		groups = "ADC7";
+	};
+
+	pinctrl_adc8_default: adc8_default {
+		function = "ADC8";
+		groups = "ADC8";
+	};
+
+	pinctrl_adc9_default: adc9_default {
+		function = "ADC9";
+		groups = "ADC9";
+	};
+
+	pinctrl_bmcint_default: bmcint_default {
+		function = "BMCINT";
+		groups = "BMCINT";
+	};
+
+	pinctrl_espi_default: espi_default {
+		function = "ESPI";
+		groups = "ESPI";
+	};
+
+	pinctrl_espialt_default: espialt_default {
+		function = "ESPIALT";
+		groups = "ESPIALT";
+	};
+
+	pinctrl_fsi1_default: fsi1_default {
+		function = "FSI1";
+		groups = "FSI1";
+	};
+
+	pinctrl_fsi2_default: fsi2_default {
+		function = "FSI2";
+		groups = "FSI2";
+	};
+
+	pinctrl_fwspiabr_default: fwspiabr_default {
+		function = "FWSPIABR";
+		groups = "FWSPIABR";
+	};
+
+	pinctrl_fwspid_default: fwspid_default {
+		function = "FWSPID";
+		groups = "FWSPID";
+	};
+
+	pinctrl_fwqspi_default: fwqspi_default {
+		function = "FWQSPI";
+		groups = "FWQSPI";
+	};
+
+	pinctrl_fwspiwp_default: fwspiwp_default {
+		function = "FWSPIWP";
+		groups = "FWSPIWP";
+	};
+
+	pinctrl_gpit0_default: gpit0_default {
+		function = "GPIT0";
+		groups = "GPIT0";
+	};
+
+	pinctrl_gpit1_default: gpit1_default {
+		function = "GPIT1";
+		groups = "GPIT1";
+	};
+
+	pinctrl_gpit2_default: gpit2_default {
+		function = "GPIT2";
+		groups = "GPIT2";
+	};
+
+	pinctrl_gpit3_default: gpit3_default {
+		function = "GPIT3";
+		groups = "GPIT3";
+	};
+
+	pinctrl_gpit4_default: gpit4_default {
+		function = "GPIT4";
+		groups = "GPIT4";
+	};
+
+	pinctrl_gpit5_default: gpit5_default {
+		function = "GPIT5";
+		groups = "GPIT5";
+	};
+
+	pinctrl_gpit6_default: gpit6_default {
+		function = "GPIT6";
+		groups = "GPIT6";
+	};
+
+	pinctrl_gpit7_default: gpit7_default {
+		function = "GPIT7";
+		groups = "GPIT7";
+	};
+
+	pinctrl_gpiu0_default: gpiu0_default {
+		function = "GPIU0";
+		groups = "GPIU0";
+	};
+
+	pinctrl_gpiu1_default: gpiu1_default {
+		function = "GPIU1";
+		groups = "GPIU1";
+	};
+
+	pinctrl_gpiu2_default: gpiu2_default {
+		function = "GPIU2";
+		groups = "GPIU2";
+	};
+
+	pinctrl_gpiu3_default: gpiu3_default {
+		function = "GPIU3";
+		groups = "GPIU3";
+	};
+
+	pinctrl_gpiu4_default: gpiu4_default {
+		function = "GPIU4";
+		groups = "GPIU4";
+	};
+
+	pinctrl_gpiu5_default: gpiu5_default {
+		function = "GPIU5";
+		groups = "GPIU5";
+	};
+
+	pinctrl_gpiu6_default: gpiu6_default {
+		function = "GPIU6";
+		groups = "GPIU6";
+	};
+
+	pinctrl_gpiu7_default: gpiu7_default {
+		function = "GPIU7";
+		groups = "GPIU7";
+	};
+
+	pinctrl_hvi3c3_default: hvi3c3_default {
+		function = "I3C3";
+		groups = "HVI3C3";
+	};
+
+	pinctrl_hvi3c4_default: hvi3c4_default {
+		function = "I3C4";
+		groups = "HVI3C4";
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		function = "I2C1";
+		groups = "I2C1";
+	};
+
+	pinctrl_i2c10_default: i2c10_default {
+		function = "I2C10";
+		groups = "I2C10";
+	};
+
+	pinctrl_i2c11_default: i2c11_default {
+		function = "I2C11";
+		groups = "I2C11";
+	};
+
+	pinctrl_i2c12_default: i2c12_default {
+		function = "I2C12";
+		groups = "I2C12";
+	};
+
+	pinctrl_i2c13_default: i2c13_default {
+		function = "I2C13";
+		groups = "I2C13";
+	};
+
+	pinctrl_i2c14_default: i2c14_default {
+		function = "I2C14";
+		groups = "I2C14";
+	};
+
+	pinctrl_i2c15_default: i2c15_default {
+		function = "I2C15";
+		groups = "I2C15";
+	};
+
+	pinctrl_i2c16_default: i2c16_default {
+		function = "I2C16";
+		groups = "I2C16";
+	};
+
+	pinctrl_i2c2_default: i2c2_default {
+		function = "I2C2";
+		groups = "I2C2";
+	};
+
+	pinctrl_i2c3_default: i2c3_default {
+		function = "I2C3";
+		groups = "I2C3";
+	};
+
+	pinctrl_i2c4_default: i2c4_default {
+		function = "I2C4";
+		groups = "I2C4";
+	};
+
+	pinctrl_i2c5_default: i2c5_default {
+		function = "I2C5";
+		groups = "I2C5";
+	};
+
+	pinctrl_i2c6_default: i2c6_default {
+		function = "I2C6";
+		groups = "I2C6";
+	};
+
+	pinctrl_i2c7_default: i2c7_default {
+		function = "I2C7";
+		groups = "I2C7";
+	};
+
+	pinctrl_i2c8_default: i2c8_default {
+		function = "I2C8";
+		groups = "I2C8";
+	};
+
+	pinctrl_i2c9_default: i2c9_default {
+		function = "I2C9";
+		groups = "I2C9";
+	};
+
+	pinctrl_i3c1_default: i3c1_default {
+		function = "I3C1";
+		groups = "I3C1";
+	};
+
+	pinctrl_i3c2_default: i3c2_default {
+		function = "I3C2";
+		groups = "I3C2";
+	};
+
+	pinctrl_i3c3_default: i3c3_default {
+		function = "I3C3";
+		groups = "I3C3";
+	};
+
+	pinctrl_i3c4_default: i3c4_default {
+		function = "I3C4";
+		groups = "I3C4";
+	};
+
+	pinctrl_i3c5_default: i3c5_default {
+		function = "I3C5";
+		groups = "I3C5";
+	};
+
+	pinctrl_i3c6_default: i3c6_default {
+		function = "I3C6";
+		groups = "I3C6";
+	};
+
+	pinctrl_jtagm_default: jtagm_default {
+		function = "JTAGM";
+		groups = "JTAGM";
+	};
+
+	pinctrl_lhpd_default: lhpd_default {
+		function = "LHPD";
+		groups = "LHPD";
+	};
+
+	pinctrl_lhsirq_default: lhsirq_default {
+		function = "LHSIRQ";
+		groups = "LHSIRQ";
+	};
+
+	pinctrl_lpc_default: lpc_default {
+		function = "LPC";
+		groups = "LPC";
+	};
+
+	pinctrl_lpchc_default: lpchc_default {
+		function = "LPCHC";
+		groups = "LPCHC";
+	};
+
+	pinctrl_lpcpd_default: lpcpd_default {
+		function = "LPCPD";
+		groups = "LPCPD";
+	};
+
+	pinctrl_lpcpme_default: lpcpme_default {
+		function = "LPCPME";
+		groups = "LPCPME";
+	};
+
+	pinctrl_lpcsmi_default: lpcsmi_default {
+		function = "LPCSMI";
+		groups = "LPCSMI";
+	};
+
+	pinctrl_lsirq_default: lsirq_default {
+		function = "LSIRQ";
+		groups = "LSIRQ";
+	};
+
+	pinctrl_maclink1_default: maclink1_default {
+		function = "MACLINK1";
+		groups = "MACLINK1";
+	};
+
+	pinctrl_maclink2_default: maclink2_default {
+		function = "MACLINK2";
+		groups = "MACLINK2";
+	};
+
+	pinctrl_maclink3_default: maclink3_default {
+		function = "MACLINK3";
+		groups = "MACLINK3";
+	};
+
+	pinctrl_maclink4_default: maclink4_default {
+		function = "MACLINK4";
+		groups = "MACLINK4";
+	};
+
+	pinctrl_mdio1_default: mdio1_default {
+		function = "MDIO1";
+		groups = "MDIO1";
+	};
+
+	pinctrl_mdio2_default: mdio2_default {
+		function = "MDIO2";
+		groups = "MDIO2";
+	};
+
+	pinctrl_mdio3_default: mdio3_default {
+		function = "MDIO3";
+		groups = "MDIO3";
+	};
+
+	pinctrl_mdio4_default: mdio4_default {
+		function = "MDIO4";
+		groups = "MDIO4";
+	};
+
+	pinctrl_ncsi3_default: ncsi3_default {
+		function = "RMII3";
+		groups = "NCSI3";
+	};
+
+	pinctrl_ncsi4_default: ncsi4_default {
+		function = "RMII4";
+		groups = "NCSI4";
+	};
+
+	pinctrl_ncts1_default: ncts1_default {
+		function = "NCTS1";
+		groups = "NCTS1";
+	};
+
+	pinctrl_ncts2_default: ncts2_default {
+		function = "NCTS2";
+		groups = "NCTS2";
+	};
+
+	pinctrl_ncts3_default: ncts3_default {
+		function = "NCTS3";
+		groups = "NCTS3";
+	};
+
+	pinctrl_ncts4_default: ncts4_default {
+		function = "NCTS4";
+		groups = "NCTS4";
+	};
+
+	pinctrl_ndcd1_default: ndcd1_default {
+		function = "NDCD1";
+		groups = "NDCD1";
+	};
+
+	pinctrl_ndcd2_default: ndcd2_default {
+		function = "NDCD2";
+		groups = "NDCD2";
+	};
+
+	pinctrl_ndcd3_default: ndcd3_default {
+		function = "NDCD3";
+		groups = "NDCD3";
+	};
+
+	pinctrl_ndcd4_default: ndcd4_default {
+		function = "NDCD4";
+		groups = "NDCD4";
+	};
+
+	pinctrl_ndsr1_default: ndsr1_default {
+		function = "NDSR1";
+		groups = "NDSR1";
+	};
+
+	pinctrl_ndsr2_default: ndsr2_default {
+		function = "NDSR2";
+		groups = "NDSR2";
+	};
+
+	pinctrl_ndsr3_default: ndsr3_default {
+		function = "NDSR3";
+		groups = "NDSR3";
+	};
+
+	pinctrl_ndsr4_default: ndsr4_default {
+		function = "NDSR4";
+		groups = "NDSR4";
+	};
+
+	pinctrl_ndtr1_default: ndtr1_default {
+		function = "NDTR1";
+		groups = "NDTR1";
+	};
+
+	pinctrl_ndtr2_default: ndtr2_default {
+		function = "NDTR2";
+		groups = "NDTR2";
+	};
+
+	pinctrl_ndtr3_default: ndtr3_default {
+		function = "NDTR3";
+		groups = "NDTR3";
+	};
+
+	pinctrl_ndtr4_default: ndtr4_default {
+		function = "NDTR4";
+		groups = "NDTR4";
+	};
+
+	pinctrl_nri1_default: nri1_default {
+		function = "NRI1";
+		groups = "NRI1";
+	};
+
+	pinctrl_nri2_default: nri2_default {
+		function = "NRI2";
+		groups = "NRI2";
+	};
+
+	pinctrl_nri3_default: nri3_default {
+		function = "NRI3";
+		groups = "NRI3";
+	};
+
+	pinctrl_nri4_default: nri4_default {
+		function = "NRI4";
+		groups = "NRI4";
+	};
+
+	pinctrl_nrts1_default: nrts1_default {
+		function = "NRTS1";
+		groups = "NRTS1";
+	};
+
+	pinctrl_nrts2_default: nrts2_default {
+		function = "NRTS2";
+		groups = "NRTS2";
+	};
+
+	pinctrl_nrts3_default: nrts3_default {
+		function = "NRTS3";
+		groups = "NRTS3";
+	};
+
+	pinctrl_nrts4_default: nrts4_default {
+		function = "NRTS4";
+		groups = "NRTS4";
+	};
+
+	pinctrl_oscclk_default: oscclk_default {
+		function = "OSCCLK";
+		groups = "OSCCLK";
+	};
+
+	pinctrl_pewake_default: pewake_default {
+		function = "PEWAKE";
+		groups = "PEWAKE";
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		function = "PWM0";
+		groups = "PWM0";
+	};
+
+	pinctrl_pwm1_default: pwm1_default {
+		function = "PWM1";
+		groups = "PWM1";
+	};
+
+	pinctrl_pwm10g0_default: pwm10g0_default {
+		function = "PWM10";
+		groups = "PWM10G0";
+	};
+
+	pinctrl_pwm10g1_default: pwm10g1_default {
+		function = "PWM10";
+		groups = "PWM10G1";
+	};
+
+	pinctrl_pwm11g0_default: pwm11g0_default {
+		function = "PWM11";
+		groups = "PWM11G0";
+	};
+
+	pinctrl_pwm11g1_default: pwm11g1_default {
+		function = "PWM11";
+		groups = "PWM11G1";
+	};
+
+	pinctrl_pwm12g0_default: pwm12g0_default {
+		function = "PWM12";
+		groups = "PWM12G0";
+	};
+
+	pinctrl_pwm12g1_default: pwm12g1_default {
+		function = "PWM12";
+		groups = "PWM12G1";
+	};
+
+	pinctrl_pwm13g0_default: pwm13g0_default {
+		function = "PWM13";
+		groups = "PWM13G0";
+	};
+
+	pinctrl_pwm13g1_default: pwm13g1_default {
+		function = "PWM13";
+		groups = "PWM13G1";
+	};
+
+	pinctrl_pwm14g0_default: pwm14g0_default {
+		function = "PWM14";
+		groups = "PWM14G0";
+	};
+
+	pinctrl_pwm14g1_default: pwm14g1_default {
+		function = "PWM14";
+		groups = "PWM14G1";
+	};
+
+	pinctrl_pwm15g0_default: pwm15g0_default {
+		function = "PWM15";
+		groups = "PWM15G0";
+	};
+
+	pinctrl_pwm15g1_default: pwm15g1_default {
+		function = "PWM15";
+		groups = "PWM15G1";
+	};
+
+	pinctrl_pwm2_default: pwm2_default {
+		function = "PWM2";
+		groups = "PWM2";
+	};
+
+	pinctrl_pwm3_default: pwm3_default {
+		function = "PWM3";
+		groups = "PWM3";
+	};
+
+	pinctrl_pwm4_default: pwm4_default {
+		function = "PWM4";
+		groups = "PWM4";
+	};
+
+	pinctrl_pwm5_default: pwm5_default {
+		function = "PWM5";
+		groups = "PWM5";
+	};
+
+	pinctrl_pwm6_default: pwm6_default {
+		function = "PWM6";
+		groups = "PWM6";
+	};
+
+	pinctrl_pwm7_default: pwm7_default {
+		function = "PWM7";
+		groups = "PWM7";
+	};
+
+	pinctrl_pwm8g0_default: pwm8g0_default {
+		function = "PWM8";
+		groups = "PWM8G0";
+	};
+
+	pinctrl_pwm8g1_default: pwm8g1_default {
+		function = "PWM8";
+		groups = "PWM8G1";
+	};
+
+	pinctrl_pwm9g0_default: pwm9g0_default {
+		function = "PWM9";
+		groups = "PWM9G0";
+	};
+
+	pinctrl_pwm9g1_default: pwm9g1_default {
+		function = "PWM9";
+		groups = "PWM9G1";
+	};
+
+	pinctrl_qspi1_default: qspi1_default {
+		function = "SPI1";
+		groups = "QSPI1";
+	};
+
+	pinctrl_qspi2_default: qspi2_default {
+		function = "SPI2";
+		groups = "QSPI2";
+	};
+
+	pinctrl_rgmii1_default: rgmii1_default {
+		function = "RGMII1";
+		groups = "RGMII1";
+	};
+
+	pinctrl_rgmii2_default: rgmii2_default {
+		function = "RGMII2";
+		groups = "RGMII2";
+	};
+
+	pinctrl_rgmii3_default: rgmii3_default {
+		function = "RGMII3";
+		groups = "RGMII3";
+	};
+
+	pinctrl_rgmii4_default: rgmii4_default {
+		function = "RGMII4";
+		groups = "RGMII4";
+	};
+
+	pinctrl_rmii1_default: rmii1_default {
+		function = "RMII1";
+		groups = "RMII1";
+	};
+
+	pinctrl_rmii2_default: rmii2_default {
+		function = "RMII2";
+		groups = "RMII2";
+	};
+
+	pinctrl_rmii3_default: rmii3_default {
+		function = "RMII3";
+		groups = "RMII3";
+	};
+
+	pinctrl_rmii4_default: rmii4_default {
+		function = "RMII4";
+		groups = "RMII4";
+	};
+
+	pinctrl_rxd1_default: rxd1_default {
+		function = "RXD1";
+		groups = "RXD1";
+	};
+
+	pinctrl_rxd2_default: rxd2_default {
+		function = "RXD2";
+		groups = "RXD2";
+	};
+
+	pinctrl_rxd3_default: rxd3_default {
+		function = "RXD3";
+		groups = "RXD3";
+	};
+
+	pinctrl_rxd4_default: rxd4_default {
+		function = "RXD4";
+		groups = "RXD4";
+	};
+
+	pinctrl_salt1_default: salt1_default {
+		function = "SALT1";
+		groups = "SALT1";
+	};
+
+	pinctrl_salt10g0_default: salt10g0_default {
+		function = "SALT10";
+		groups = "SALT10G0";
+	};
+
+	pinctrl_salt10g1_default: salt10g1_default {
+		function = "SALT10";
+		groups = "SALT10G1";
+	};
+
+	pinctrl_salt11g0_default: salt11g0_default {
+		function = "SALT11";
+		groups = "SALT11G0";
+	};
+
+	pinctrl_salt11g1_default: salt11g1_default {
+		function = "SALT11";
+		groups = "SALT11G1";
+	};
+
+	pinctrl_salt12g0_default: salt12g0_default {
+		function = "SALT12";
+		groups = "SALT12G0";
+	};
+
+	pinctrl_salt12g1_default: salt12g1_default {
+		function = "SALT12";
+		groups = "SALT12G1";
+	};
+
+	pinctrl_salt13g0_default: salt13g0_default {
+		function = "SALT13";
+		groups = "SALT13G0";
+	};
+
+	pinctrl_salt13g1_default: salt13g1_default {
+		function = "SALT13";
+		groups = "SALT13G1";
+	};
+
+	pinctrl_salt14g0_default: salt14g0_default {
+		function = "SALT14";
+		groups = "SALT14G0";
+	};
+
+	pinctrl_salt14g1_default: salt14g1_default {
+		function = "SALT14";
+		groups = "SALT14G1";
+	};
+
+	pinctrl_salt15g0_default: salt15g0_default {
+		function = "SALT15";
+		groups = "SALT15G0";
+	};
+
+	pinctrl_salt15g1_default: salt15g1_default {
+		function = "SALT15";
+		groups = "SALT15G1";
+	};
+
+	pinctrl_salt16g0_default: salt16g0_default {
+		function = "SALT16";
+		groups = "SALT16G0";
+	};
+
+	pinctrl_salt16g1_default: salt16g1_default {
+		function = "SALT16";
+		groups = "SALT16G1";
+	};
+
+	pinctrl_salt2_default: salt2_default {
+		function = "SALT2";
+		groups = "SALT2";
+	};
+
+	pinctrl_salt3_default: salt3_default {
+		function = "SALT3";
+		groups = "SALT3";
+	};
+
+	pinctrl_salt4_default: salt4_default {
+		function = "SALT4";
+		groups = "SALT4";
+	};
+
+	pinctrl_salt5_default: salt5_default {
+		function = "SALT5";
+		groups = "SALT5";
+	};
+
+	pinctrl_salt6_default: salt6_default {
+		function = "SALT6";
+		groups = "SALT6";
+	};
+
+	pinctrl_salt7_default: salt7_default {
+		function = "SALT7";
+		groups = "SALT7";
+	};
+
+	pinctrl_salt8_default: salt8_default {
+		function = "SALT8";
+		groups = "SALT8";
+	};
+
+	pinctrl_salt9g0_default: salt9g0_default {
+		function = "SALT9";
+		groups = "SALT9G0";
+	};
+
+	pinctrl_salt9g1_default: salt9g1_default {
+		function = "SALT9";
+		groups = "SALT9G1";
+	};
+
+	pinctrl_sd1_default: sd1_default {
+		function = "SD1";
+		groups = "SD1";
+	};
+
+	pinctrl_sd2_default: sd2_default {
+		function = "SD2";
+		groups = "SD2";
+	};
+
+	pinctrl_emmc_default: emmc_default {
+		function = "EMMC";
+		groups = "EMMCG4";
+	};
+
+	pinctrl_sgpm1_default: sgpm1_default {
+		function = "SGPM1";
+		groups = "SGPM1";
+	};
+
+	pinctrl_sgpm2_default: sgpm2_default {
+		function = "SGPM2";
+		groups = "SGPM2";
+	};
+
+	pinctrl_sgps1_default: sgps1_default {
+		function = "SGPS1";
+		groups = "SGPS1";
+	};
+
+	pinctrl_sgps2_default: sgps2_default {
+		function = "SGPS2";
+		groups = "SGPS2";
+	};
+
+	pinctrl_sioonctrl_default: sioonctrl_default {
+		function = "SIOONCTRL";
+		groups = "SIOONCTRL";
+	};
+
+	pinctrl_siopbi_default: siopbi_default {
+		function = "SIOPBI";
+		groups = "SIOPBI";
+	};
+
+	pinctrl_siopbo_default: siopbo_default {
+		function = "SIOPBO";
+		groups = "SIOPBO";
+	};
+
+	pinctrl_siopwreq_default: siopwreq_default {
+		function = "SIOPWREQ";
+		groups = "SIOPWREQ";
+	};
+
+	pinctrl_siopwrgd_default: siopwrgd_default {
+		function = "SIOPWRGD";
+		groups = "SIOPWRGD";
+	};
+
+	pinctrl_sios3_default: sios3_default {
+		function = "SIOS3";
+		groups = "SIOS3";
+	};
+
+	pinctrl_sios5_default: sios5_default {
+		function = "SIOS5";
+		groups = "SIOS5";
+	};
+
+	pinctrl_siosci_default: siosci_default {
+		function = "SIOSCI";
+		groups = "SIOSCI";
+	};
+
+	pinctrl_spi1_default: spi1_default {
+		function = "SPI1";
+		groups = "SPI1";
+	};
+
+	pinctrl_spi1abr_default: spi1abr_default {
+		function = "SPI1ABR";
+		groups = "SPI1ABR";
+	};
+
+	pinctrl_spi1cs1_default: spi1cs1_default {
+		function = "SPI1CS1";
+		groups = "SPI1CS1";
+	};
+
+	pinctrl_spi1wp_default: spi1wp_default {
+		function = "SPI1WP";
+		groups = "SPI1WP";
+	};
+
+	pinctrl_spi2_default: spi2_default {
+		function = "SPI2";
+		groups = "SPI2";
+	};
+
+	pinctrl_spi2cs1_default: spi2cs1_default {
+		function = "SPI2CS1";
+		groups = "SPI2CS1";
+	};
+
+	pinctrl_spi2cs2_default: spi2cs2_default {
+		function = "SPI2CS2";
+		groups = "SPI2CS2";
+	};
+
+	pinctrl_tach0_default: tach0_default {
+		function = "TACH0";
+		groups = "TACH0";
+	};
+
+	pinctrl_tach1_default: tach1_default {
+		function = "TACH1";
+		groups = "TACH1";
+	};
+
+	pinctrl_tach10_default: tach10_default {
+		function = "TACH10";
+		groups = "TACH10";
+	};
+
+	pinctrl_tach11_default: tach11_default {
+		function = "TACH11";
+		groups = "TACH11";
+	};
+
+	pinctrl_tach12_default: tach12_default {
+		function = "TACH12";
+		groups = "TACH12";
+	};
+
+	pinctrl_tach13_default: tach13_default {
+		function = "TACH13";
+		groups = "TACH13";
+	};
+
+	pinctrl_tach14_default: tach14_default {
+		function = "TACH14";
+		groups = "TACH14";
+	};
+
+	pinctrl_tach15_default: tach15_default {
+		function = "TACH15";
+		groups = "TACH15";
+	};
+
+	pinctrl_tach2_default: tach2_default {
+		function = "TACH2";
+		groups = "TACH2";
+	};
+
+	pinctrl_tach3_default: tach3_default {
+		function = "TACH3";
+		groups = "TACH3";
+	};
+
+	pinctrl_tach4_default: tach4_default {
+		function = "TACH4";
+		groups = "TACH4";
+	};
+
+	pinctrl_tach5_default: tach5_default {
+		function = "TACH5";
+		groups = "TACH5";
+	};
+
+	pinctrl_tach6_default: tach6_default {
+		function = "TACH6";
+		groups = "TACH6";
+	};
+
+	pinctrl_tach7_default: tach7_default {
+		function = "TACH7";
+		groups = "TACH7";
+	};
+
+	pinctrl_tach8_default: tach8_default {
+		function = "TACH8";
+		groups = "TACH8";
+	};
+
+	pinctrl_tach9_default: tach9_default {
+		function = "TACH9";
+		groups = "TACH9";
+	};
+
+	pinctrl_thru0_default: thru0_default {
+		function = "THRU0";
+		groups = "THRU0";
+	};
+
+	pinctrl_thru1_default: thru1_default {
+		function = "THRU1";
+		groups = "THRU1";
+	};
+
+	pinctrl_thru2_default: thru2_default {
+		function = "THRU2";
+		groups = "THRU2";
+	};
+
+	pinctrl_thru3_default: thru3_default {
+		function = "THRU3";
+		groups = "THRU3";
+	};
+
+	pinctrl_txd1_default: txd1_default {
+		function = "TXD1";
+		groups = "TXD1";
+	};
+
+	pinctrl_txd2_default: txd2_default {
+		function = "TXD2";
+		groups = "TXD2";
+	};
+
+	pinctrl_txd3_default: txd3_default {
+		function = "TXD3";
+		groups = "TXD3";
+	};
+
+	pinctrl_txd4_default: txd4_default {
+		function = "TXD4";
+		groups = "TXD4";
+	};
+
+	pinctrl_uart10_default: uart10_default {
+		function = "UART10";
+		groups = "UART10";
+	};
+
+	pinctrl_uart11_default: uart11_default {
+		function = "UART11";
+		groups = "UART11";
+	};
+
+	pinctrl_uart12g0_default: uart12g0_default {
+		function = "UART12";
+		groups = "UART12G0";
+	};
+
+	pinctrl_uart12g1_default: uart12g1_default {
+		function = "UART12";
+		groups = "UART12G1";
+	};
+
+	pinctrl_uart13g0_default: uart13g0_default {
+		function = "UART13";
+		groups = "UART13G0";
+	};
+
+	pinctrl_uart13g1_default: uart13g1_default {
+		function = "UART13";
+		groups = "UART13G1";
+	};
+
+	pinctrl_uart6_default: uart6_default {
+		function = "UART6";
+		groups = "UART6";
+	};
+
+	pinctrl_uart7_default: uart7_default {
+		function = "UART7";
+		groups = "UART7";
+	};
+
+	pinctrl_uart8_default: uart8_default {
+		function = "UART8";
+		groups = "UART8";
+	};
+
+	pinctrl_uart9_default: uart9_default {
+		function = "UART9";
+		groups = "UART9";
+	};
+
+	pinctrl_usb2ah_default: usb2ah_default {
+		function = "USB2AH";
+		groups = "USBA";
+	};
+
+	pinctrl_usb2ad_default: usb2ad_default {
+		function = "USB2AD";
+		groups = "USBA";
+	};
+
+	pinctrl_usb2bh_default: usb2bh_default {
+		function = "USB2BH";
+		groups = "USBB";
+	};
+
+	pinctrl_usb2bd_default: usb2bd_default {
+		function = "USB2BD";
+		groups = "USBB";
+	};
+
+	pinctrl_usb11bhid_default: usb11bhid_default {
+		function = "USB11BHID";
+		groups = "USBB";
+	};
+
+	pinctrl_vb_default: vb_default {
+		function = "VB";
+		groups = "VB";
+	};
+
+	pinctrl_vgahs_default: vgahs_default {
+		function = "VGAHS";
+		groups = "VGAHS";
+	};
+
+	pinctrl_vgavs_default: vgavs_default {
+		function = "VGAVS";
+		groups = "VGAVS";
+	};
+
+	pinctrl_wdtrst1_default: wdtrst1_default {
+		function = "WDTRST1";
+		groups = "WDTRST1";
+	};
+
+	pinctrl_wdtrst2_default: wdtrst2_default {
+		function = "WDTRST2";
+		groups = "WDTRST2";
+	};
+
+	pinctrl_wdtrst3_default: wdtrst3_default {
+		function = "WDTRST3";
+		groups = "WDTRST3";
+	};
+
+	pinctrl_wdtrst4_default: wdtrst4_default {
+		function = "WDTRST4";
+		groups = "WDTRST4";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
new file mode 100644
index 000000000000..f8662c8ac089
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -0,0 +1,1108 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
+#include <dt-bindings/clock/ast2600-clock.h>
+
+/ {
+	model = "Aspeed BMC";
+	compatible = "aspeed,ast2600";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		i2c14 = &i2c14;
+		i2c15 = &i2c15;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &vuart1;
+		serial6 = &vuart2;
+		mdio0 = &mdio0;
+		mdio1 = &mdio1;
+		mdio2 = &mdio2;
+		mdio3 = &mdio3;
+	};
+
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "aspeed,ast2600-smp";
+
+		cpu@f00 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0xf00>;
+		};
+
+		cpu@f01 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0xf01>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		clocks = <&syscon ASPEED_CLK_HPLL>;
+		arm,cpu-registers-not-fw-configured;
+		always-on;
+	};
+
+	edac: sdram@1e6e0000 {
+		compatible = "aspeed,ast2600-sdram-edac", "syscon";
+		reg = <0x1e6e0000 0x174>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges;
+
+		gic: interrupt-controller@40461000 {
+			compatible = "arm,cortex-a7-gic";
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			reg = <0x40461000 0x1000>,
+			    <0x40462000 0x1000>,
+			    <0x40464000 0x2000>,
+			    <0x40466000 0x2000>;
+			};
+
+		ahbc: bus@1e600000 {
+			compatible = "aspeed,ast2600-ahbc", "syscon";
+			reg = <0x1e600000 0x100>;
+		};
+
+		fmc: spi@1e620000 {
+			reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2600-fmc";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@2 {
+				reg = < 2 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		spi1: spi@1e630000 {
+			reg = <0x1e630000 0xc4>, <0x30000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2600-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		spi2: spi@1e631000 {
+			reg = <0x1e631000 0xc4>, <0x50000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2600-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@2 {
+				reg = < 2 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		mdio0: mdio@1e650000 {
+			compatible = "aspeed,ast2600-mdio";
+			reg = <0x1e650000 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mdio1_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
+		};
+
+		mdio1: mdio@1e650008 {
+			compatible = "aspeed,ast2600-mdio";
+			reg = <0x1e650008 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mdio2_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
+		};
+
+		mdio2: mdio@1e650010 {
+			compatible = "aspeed,ast2600-mdio";
+			reg = <0x1e650010 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mdio3_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
+		};
+
+		mdio3: mdio@1e650018 {
+			compatible = "aspeed,ast2600-mdio";
+			reg = <0x1e650018 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mdio4_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
+		};
+
+		mac0: ethernet@1e660000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e660000 0x180>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
+			status = "disabled";
+		};
+
+		mac1: ethernet@1e680000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e680000 0x180>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
+			status = "disabled";
+		};
+
+		mac2: ethernet@1e670000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e670000 0x180>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>;
+			status = "disabled";
+		};
+
+		mac3: ethernet@1e690000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e690000 0x180>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>;
+			status = "disabled";
+		};
+
+		ehci0: usb@1e6a1000 {
+			compatible = "aspeed,ast2600-ehci", "generic-ehci";
+			reg = <0x1e6a1000 0x100>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ah_default>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1e6a3000 {
+			compatible = "aspeed,ast2600-ehci", "generic-ehci";
+			reg = <0x1e6a3000 0x100>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2bh_default>;
+			status = "disabled";
+		};
+
+		uhci: usb@1e6b0000 {
+			compatible = "aspeed,ast2600-uhci", "generic-uhci";
+			reg = <0x1e6b0000 0x100>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#ports = <2>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
+			status = "disabled";
+			/*
+			 * No default pinmux, it will follow EHCI, use an
+			 * explicit pinmux override if EHCI is not enabled.
+			 */
+		};
+
+		vhub: usb-vhub@1e6a0000 {
+			compatible = "aspeed,ast2600-usb-vhub";
+			reg = <0x1e6a0000 0x350>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			aspeed,vhub-downstream-ports = <7>;
+			aspeed,vhub-generic-endpoints = <21>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ad_default>;
+			status = "disabled";
+		};
+
+		udc: usb@1e6a2000 {
+			compatible = "aspeed,ast2600-udc";
+			reg = <0x1e6a2000 0x300>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2bd_default>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			hace: crypto@1e6d0000 {
+				compatible = "aspeed,ast2600-hace";
+				reg = <0x1e6d0000 0x200>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
+				resets = <&syscon ASPEED_RESET_HACE>;
+			};
+
+			syscon: syscon@1e6e2000 {
+				compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
+				reg = <0x1e6e2000 0x1000>;
+				ranges = <0 0x1e6e2000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+
+				pinctrl: pinctrl {
+					compatible = "aspeed,ast2600-pinctrl";
+				};
+
+				silicon-id@14 {
+					compatible = "aspeed,ast2600-silicon-id", "aspeed,silicon-id";
+					reg = <0x14 0x4 0x5b0 0x8>;
+				};
+
+				smp-memram@180 {
+					compatible = "aspeed,ast2600-smpmem";
+					reg = <0x180 0x40>;
+				};
+
+				scu_ic0: interrupt-controller@560 {
+					#interrupt-cells = <1>;
+					compatible = "aspeed,ast2600-scu-ic0";
+					reg = <0x560 0x4>;
+					interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-controller;
+				};
+
+				scu_ic1: interrupt-controller@570 {
+					#interrupt-cells = <1>;
+					compatible = "aspeed,ast2600-scu-ic1";
+					reg = <0x570 0x4>;
+					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-controller;
+				};
+			};
+
+			rng: hwrng@1e6e2524 {
+				compatible = "timeriomem_rng";
+				reg = <0x1e6e2524 0x4>;
+				period = <1>;
+				quality = <100>;
+			};
+
+			gfx: display@1e6e6000 {
+				compatible = "aspeed,ast2600-gfx", "syscon";
+				reg = <0x1e6e6000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+				resets = <&syscon ASPEED_RESET_GRAPHICS>;
+				syscon = <&syscon>;
+				status = "disabled";
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			adc0: adc@1e6e9000 {
+				compatible = "aspeed,ast2600-adc0";
+				reg = <0x1e6e9000 0x100>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			adc1: adc@1e6e9100 {
+				compatible = "aspeed,ast2600-adc1";
+				reg = <0x1e6e9100 0x100>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			sbc: secure-boot-controller@1e6f2000 {
+				compatible = "aspeed,ast2600-sbc";
+				reg = <0x1e6f2000 0x1000>;
+			};
+
+			acry: crypto@1e6fa000 {
+				compatible = "aspeed,ast2600-acry";
+				reg = <0x1e6fa000 0x400>, <0x1e710000 0x1800>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_RSACLK>;
+				aspeed,ahbc = <&ahbc>;
+			};
+
+			video: video@1e700000 {
+				compatible = "aspeed,ast2600-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			gpio0: gpio@1e780000 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2600-gpio";
+				reg = <0x1e780000 0x400>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-ranges = <&pinctrl 0 0 208>;
+				ngpios = <208>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sgpiom0: sgpiom@1e780500 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2600-sgpiom";
+				reg = <0x1e780500 0x100>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				bus-frequency = <12000000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_sgpm1_default>;
+				status = "disabled";
+			};
+
+			sgpiom1: sgpiom@1e780600 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2600-sgpiom";
+				reg = <0x1e780600 0x100>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				bus-frequency = <12000000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_sgpm2_default>;
+				status = "disabled";
+			};
+
+			gpio1: gpio@1e780800 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2600-gpio";
+				reg = <0x1e780800 0x800>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-ranges = <&pinctrl 0 208 36>;
+				ngpios = <36>;
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			rtc: rtc@1e781000 {
+				compatible = "aspeed,ast2600-rtc";
+				reg = <0x1e781000 0x18>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			timer: timer@1e782000 {
+				compatible = "aspeed,ast2600-timer";
+				reg = <0x1e782000 0x90>;
+				interrupts-extended = <&gic  GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				clock-names = "PCLK";
+				status = "disabled";
+                        };
+
+			uart1: serial@1e783000 {
+				compatible = "ns16550a";
+				reg = <0x1e783000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
+				resets = <&lpc_reset 4>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_txd1_default &pinctrl_rxd1_default>;
+				status = "disabled";
+			};
+
+			uart5: serial@1e784000 {
+				compatible = "ns16550a";
+				reg = <0x1e784000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
+				no-loopback-test;
+			};
+
+			wdt1: watchdog@1e785000 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e785000 0x40>;
+			};
+
+			wdt2: watchdog@1e785040 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e785040 0x40>;
+				status = "disabled";
+			};
+
+			wdt3: watchdog@1e785080 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e785080 0x40>;
+				status = "disabled";
+			};
+
+			wdt4: watchdog@1e7850c0 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e7850C0 0x40>;
+				status = "disabled";
+			};
+
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2600-peci";
+				reg = <0x1e78b000 0x100>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
+			};
+
+			lpc: lpc@1e789000 {
+				compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
+				reg = <0x1e789000 0x1000>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e789000 0x1000>;
+
+				kcs1: kcs@24 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
+					interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					kcs_chan = <1>;
+					status = "disabled";
+				};
+
+				kcs2: kcs@28 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
+					interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs3: kcs@2c {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
+					interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs4: kcs@114 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>;
+					interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_ctrl: lpc-ctrl@80 {
+					compatible = "aspeed,ast2600-lpc-ctrl";
+					reg = <0x80 0x80>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_snoop: lpc-snoop@80 {
+					compatible = "aspeed,ast2600-lpc-snoop";
+					reg = <0x80 0x80>;
+					interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lhc: lhc@a0 {
+					compatible = "aspeed,ast2600-lhc";
+					reg = <0xa0 0x24 0xc8 0x8>;
+				};
+
+				lpc_reset: reset-controller@98 {
+					compatible = "aspeed,ast2600-lpc-reset";
+					reg = <0x98 0x4>;
+					#reset-cells = <1>;
+				};
+
+				uart_routing: uart-routing@98 {
+					compatible = "aspeed,ast2600-uart-routing";
+					reg = <0x98 0x8>;
+					status = "disabled";
+				};
+
+				ibt: ibt@140 {
+					compatible = "aspeed,ast2600-ibt-bmc";
+					reg = <0x140 0x18>;
+					interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+			};
+
+			sdc: sdc@1e740000 {
+				compatible = "aspeed,ast2600-sd-controller";
+				reg = <0x1e740000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e740000 0x10000>;
+				clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+				status = "disabled";
+
+				sdhci0: sdhci@1e740100 {
+					compatible = "aspeed,ast2600-sdhci";
+					reg = <0x100 0x100>;
+					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+
+				sdhci1: sdhci@1e740200 {
+					compatible = "aspeed,ast2600-sdhci";
+					reg = <0x200 0x100>;
+					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+			};
+
+			emmc_controller: sdc@1e750000 {
+				compatible = "aspeed,ast2600-sd-controller";
+				reg = <0x1e750000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e750000 0x10000>;
+				clocks = <&syscon ASPEED_CLK_GATE_EMMCCLK>;
+				status = "disabled";
+
+				emmc: sdhci@1e750100 {
+					compatible = "aspeed,ast2600-sdhci";
+					reg = <0x100 0x100>;
+					sdhci,auto-cmd12;
+					interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_EMMC>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_emmc_default>;
+				};
+			};
+
+			vuart1: serial@1e787000 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e787000 0x40>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			vuart3: serial@1e787800 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e787800 0x40>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			vuart2: serial@1e788000 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e788000 0x40>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			vuart4: serial@1e788800 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e788800 0x40>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart2: serial@1e78d000 {
+				compatible = "ns16550a";
+				reg = <0x1e78d000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
+				resets = <&lpc_reset 5>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+				status = "disabled";
+			};
+
+			uart3: serial@1e78e000 {
+				compatible = "ns16550a";
+				reg = <0x1e78e000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
+				resets = <&lpc_reset 6>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
+				status = "disabled";
+			};
+
+			uart4: serial@1e78f000 {
+				compatible = "ns16550a";
+				reg = <0x1e78f000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
+				resets = <&lpc_reset 7>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_txd4_default &pinctrl_rxd4_default>;
+				status = "disabled";
+			};
+
+			uart6: serial@1e790000 {
+				compatible = "ns16550a";
+				reg = <0x1e790000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART6CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart6_default>;
+
+				status = "disabled";
+			};
+
+			uart7: serial@1e790100 {
+				compatible = "ns16550a";
+				reg = <0x1e790100 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART7CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart7_default>;
+
+				status = "disabled";
+			};
+
+			uart8: serial@1e790200 {
+				compatible = "ns16550a";
+				reg = <0x1e790200 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART8CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart8_default>;
+
+				status = "disabled";
+			};
+
+			uart9: serial@1e790300 {
+				compatible = "ns16550a";
+				reg = <0x1e790300 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART9CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart9_default>;
+
+				status = "disabled";
+			};
+
+			i2c: bus@1e78a000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e78a000 0x1000>;
+			};
+
+			fsim0: fsi@1e79b000 {
+				#interrupt-cells = <1>;
+				compatible = "aspeed,ast2600-fsi-master";
+				reg = <0x1e79b000 0x94>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fsi1_default>;
+				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+				interrupt-controller;
+				status = "disabled";
+			};
+
+			fsim1: fsi@1e79b100 {
+				#interrupt-cells = <1>;
+				compatible = "aspeed,ast2600-fsi-master";
+				reg = <0x1e79b100 0x94>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fsi2_default>;
+				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+				interrupt-controller;
+				status = "disabled";
+			};
+
+			udma: dma-controller@1e79e000 {
+				compatible = "aspeed,ast2600-udma";
+				reg = <0x1e79e000 0x1000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				dma-channels = <28>;
+				#dma-cells = <1>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+#include "aspeed-g6-pinctrl.dtsi"
+
+&i2c {
+	i2c0: i2c@80 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x80 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_default>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@100 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x100 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2_default>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@180 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x180 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_default>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@200 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x200 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4_default>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@280 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x280 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c5_default>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@300 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x300 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c6_default>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@380 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x380 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c7_default>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@400 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x400 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c8_default>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@480 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x480 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c9_default>;
+		status = "disabled";
+	};
+
+	i2c9: i2c@500 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x500 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c10_default>;
+		status = "disabled";
+	};
+
+	i2c10: i2c@580 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x580 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c11_default>;
+		status = "disabled";
+	};
+
+	i2c11: i2c@600 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x600 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c12_default>;
+		status = "disabled";
+	};
+
+	i2c12: i2c@680 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x680 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c13_default>;
+		status = "disabled";
+	};
+
+	i2c13: i2c@700 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x700 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c14_default>;
+		status = "disabled";
+	};
+
+	i2c14: i2c@780 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x780 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c15_default>;
+		status = "disabled";
+	};
+
+	i2c15: i2c@800 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x800 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c16_default>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/ast2400-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2400-facebook-netbmc-common.dtsi
new file mode 100644
index 000000000000..4e5e786e18b7
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ast2400-facebook-netbmc-common.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+
+/ {
+	aliases {
+		/*
+		 * Override the default uart aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x20000000>;
+	};
+};
+
+&wdt1 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.0";
+#include "facebook-bmc-flash-layout.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default
+		     &pinctrl_ndts4_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/ast2500-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2500-facebook-netbmc-common.dtsi
new file mode 100644
index 000000000000..7f1ae3f4df9d
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ast2500-facebook-netbmc-common.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2019 Facebook Inc.
+
+#include "aspeed-g5.dtsi"
+
+/ {
+	aliases {
+		spi0 = &fmc;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+/*
+ * Update reset type to "system" (full chip) to fix warm reboot hang issue
+ * when reset type is set to default ("soc", gated by reset mask registers).
+ */
+&wdt1 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+&wdt2 {
+	status = "disabled";
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	fmc_flash0: flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.0";
+	};
+
+	fmc_flash1: flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.1";
+	};
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
new file mode 100644
index 000000000000..0ef225acddfc
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	aliases {
+		mmc0 = &emmc;
+		spi1 = &spi1;
+		spi2 = &spi_gpio;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw vmalloc=640M";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	/*
+	 * GPIO-based SPI Master is required to access SPI TPM, because
+	 * full-duplex SPI transactions are not supported by ASPEED SPI
+	 * Controllers.
+	 */
+	spi_gpio: spi {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * chipselect pins are defined in platform .dts files
+		 * separately.
+		 */
+		sck-gpios = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.0";
+
+#include "facebook-bmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.1";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1@0 {
+				reg = <0x0 0x8000000>;
+				label = "flash1";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi
new file mode 100644
index 000000000000..efd92232cda2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/*
+	 * u-boot partition: 896KB.
+	 */
+	u-boot@0 {
+		reg = <0x0 0xe0000>;
+		label = "u-boot";
+	};
+
+	/*
+	 * u-boot environment variables: 64KB.
+	 */
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x10000>;
+		label = "env";
+	};
+
+	/*
+	 * image metadata partition (64KB), used by Facebook internal
+	 * tools.
+	 */
+	image-meta@f0000 {
+		reg = <0xf0000 0x10000>;
+		label = "meta";
+	};
+
+	/*
+	 * FIT image: 63 MB.
+	 */
+	fit@100000 {
+		reg = <0x100000 0x3f00000>;
+		label = "fit";
+	};
+
+	/*
+	 * "data0" partition (64MB) is used by Facebook BMC platforms as
+	 * persistent data store.
+	 */
+	data0@4000000 {
+		reg = <0x4000000 0x4000000>;
+		label = "data0";
+	};
+
+	/*
+	 * Although the master partition can be created by enabling
+	 * MTD_PARTITIONED_MASTER option, below "flash0" partition is
+	 * explicitly created to avoid breaking legacy applications.
+	 */
+	flash0@0 {
+		reg = <0x0 0x8000000>;
+		label = "flash0";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128.dtsi b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128.dtsi
new file mode 100644
index 000000000000..7f3652dea550
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/*
+	 * u-boot partition: 896KB.
+	 */
+	u-boot@0 {
+		reg = <0x0 0xe0000>;
+		label = "u-boot";
+	};
+
+	/*
+	 * u-boot environment variables: 64KB.
+	 */
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x10000>;
+		label = "env";
+	};
+
+	/*
+	 * image metadata partition (64KB), used by Facebook internal
+	 * tools.
+	 */
+	image-meta@f0000 {
+		reg = <0xf0000 0x10000>;
+		label = "meta";
+	};
+
+	/*
+	 * FIT image: 119 MB.
+	 */
+	fit@100000 {
+		reg = <0x100000 0x7700000>;
+		label = "fit";
+	};
+
+	/*
+	 * "data0" partition (8MB) is used by Facebook BMC platforms as
+	 * persistent data store.
+	 */
+	data0@7800000 {
+		reg = <0x7800000 0x800000>;
+		label = "data0";
+	};
+
+	/*
+	 * Although the master partition can be created by enabling
+	 * MTD_PARTITIONED_MASTER option, below "flash0" partition is
+	 * explicitly created to avoid breaking legacy applications.
+	 */
+	flash0@0 {
+		reg = <0x0 0x8000000>;
+		label = "flash0";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout.dtsi b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout.dtsi
new file mode 100644
index 000000000000..87bb8b576250
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	u-boot@0 {
+		reg = <0x0 0x60000>;
+		label = "u-boot";
+	};
+
+	u-boot-env@60000 {
+		reg = <0x60000 0x20000>;
+		label = "env";
+	};
+
+	fit@80000 {
+		reg = <0x80000 0x1b80000>;
+		label = "fit";
+	};
+
+	/*
+	 * "data0" partition is used by several Facebook BMC platforms
+	 * as persistent data store.
+	 */
+	data0@1c00000 {
+		reg = <0x1c00000 0x400000>;
+		label = "data0";
+	};
+
+	/*
+	 * Although the master partition can be created by enabling
+	 * MTD_PARTITIONED_MASTER option, below "flash0" partition is
+	 * explicitly created to avoid breaking legacy applications.
+	 */
+	flash0@0 {
+		reg = <0x0 0x2000000>;
+		label = "flash0";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
new file mode 100644
index 000000000000..06fac236773f
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
@@ -0,0 +1,386 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 IBM Corp.
+
+&fsim0 {
+	status = "okay";
+
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;	/* OMI01 */
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;	/* OMI23 */
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam0_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			#interrupt-cells = <1>;
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c2: i2c-bus@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;	/* OMI45 */
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;	/* OMI67 */
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam1_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam1_i2c16: i2c-bus@10 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam1_i2c17: i2c-bus@11 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <17>;	/* OP6B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ0 {
+	reg = <1>;
+};
+
+&fsi_occ1 {
+	reg = <2>;
+};
+
+/ {
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c115 = &cfam0_i2c15;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c214 = &cfam1_i2c14;
+		i2c215 = &cfam1_i2c15;
+		i2c216 = &cfam1_i2c16;
+		i2c217 = &cfam1_i2c17;
+
+		spi10 = &cfam0_spi0;
+		spi11 = &cfam0_spi1;
+		spi12 = &cfam0_spi2;
+		spi13 = &cfam0_spi3;
+		spi20 = &cfam1_spi0;
+		spi21 = &cfam1_spi1;
+		spi22 = &cfam1_spi2;
+		spi23 = &cfam1_spi3;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi
new file mode 100644
index 000000000000..9501f66d0030
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi
@@ -0,0 +1,1309 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 IBM Corp.
+
+#include "ibm-power10-dual.dtsi"
+
+&cfam0_i2c0 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom100: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo100: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c1 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom101: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo101: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c10 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom110: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo110: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c11 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom111: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo111: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c12 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom112: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo112: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c13 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom113: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo113: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c14 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom114: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo114: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c15 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom115: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo115: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c2 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom202: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo202: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c3 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom203: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo203: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c10 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom210: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo210: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c11 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom211: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo211: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c14 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom214: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo214: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c15 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom215: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo215: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c16 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom216: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo216: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c17 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom217: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo217: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@2,0 {
+		reg = <2 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <2>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_i2c0: i2c-bus@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;	/* OM01 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom300: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo300: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c1: i2c-bus@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;	/* OM23 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom301: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo301: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom310: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo310: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom311: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo311: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c12: i2c-bus@c {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <12>;	/* OP4A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom312: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo312: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c13: i2c-bus@d {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <13>;	/* OP4B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom313: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo313: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom314: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo314: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom315: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo315: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ2: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub2: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@3,0 {
+		reg = <3 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <3>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_i2c2: i2c-bus@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;	/* OM45 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom402: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo402: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c3: i2c-bus@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;	/* OM67 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom403: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo403: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom410: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo410: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom411: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo411: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom414: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo414: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom415: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo415: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c16: i2c-bus@10 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <16>;	/* OP6A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom416: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo416: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c17: i2c-bus@11 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <17>;	/* OP6B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom417: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo417: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ3: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub3: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ2 {
+	reg = <3>;
+};
+
+&fsi_occ3 {
+	reg = <4>;
+};
+
+/ {
+	aliases {
+		i2c300 = &cfam2_i2c0;
+		i2c301 = &cfam2_i2c1;
+		i2c310 = &cfam2_i2c10;
+		i2c311 = &cfam2_i2c11;
+		i2c312 = &cfam2_i2c12;
+		i2c313 = &cfam2_i2c13;
+		i2c314 = &cfam2_i2c14;
+		i2c315 = &cfam2_i2c15;
+		i2c402 = &cfam3_i2c2;
+		i2c403 = &cfam3_i2c3;
+		i2c410 = &cfam3_i2c10;
+		i2c411 = &cfam3_i2c11;
+		i2c414 = &cfam3_i2c14;
+		i2c415 = &cfam3_i2c15;
+		i2c416 = &cfam3_i2c16;
+		i2c417 = &cfam3_i2c17;
+
+		sbefifo100 = &sbefifo100;
+		sbefifo101 = &sbefifo101;
+		sbefifo110 = &sbefifo110;
+		sbefifo111 = &sbefifo111;
+		sbefifo112 = &sbefifo112;
+		sbefifo113 = &sbefifo113;
+		sbefifo114 = &sbefifo114;
+		sbefifo115 = &sbefifo115;
+		sbefifo202 = &sbefifo202;
+		sbefifo203 = &sbefifo203;
+		sbefifo210 = &sbefifo210;
+		sbefifo211 = &sbefifo211;
+		sbefifo214 = &sbefifo214;
+		sbefifo215 = &sbefifo215;
+		sbefifo216 = &sbefifo216;
+		sbefifo217 = &sbefifo217;
+		sbefifo300 = &sbefifo300;
+		sbefifo301 = &sbefifo301;
+		sbefifo310 = &sbefifo310;
+		sbefifo311 = &sbefifo311;
+		sbefifo312 = &sbefifo312;
+		sbefifo313 = &sbefifo313;
+		sbefifo314 = &sbefifo314;
+		sbefifo315 = &sbefifo315;
+		sbefifo402 = &sbefifo402;
+		sbefifo403 = &sbefifo403;
+		sbefifo410 = &sbefifo410;
+		sbefifo411 = &sbefifo411;
+		sbefifo414 = &sbefifo414;
+		sbefifo415 = &sbefifo415;
+		sbefifo416 = &sbefifo416;
+		sbefifo417 = &sbefifo417;
+
+		scom100 = &scom100;
+		scom101 = &scom101;
+		scom110 = &scom110;
+		scom111 = &scom111;
+		scom112 = &scom112;
+		scom113 = &scom113;
+		scom114 = &scom114;
+		scom115 = &scom115;
+		scom202 = &scom202;
+		scom203 = &scom203;
+		scom210 = &scom210;
+		scom211 = &scom211;
+		scom214 = &scom214;
+		scom215 = &scom215;
+		scom216 = &scom216;
+		scom217 = &scom217;
+		scom300 = &scom300;
+		scom301 = &scom301;
+		scom310 = &scom310;
+		scom311 = &scom311;
+		scom312 = &scom312;
+		scom313 = &scom313;
+		scom314 = &scom314;
+		scom315 = &scom315;
+		scom402 = &scom402;
+		scom403 = &scom403;
+		scom410 = &scom410;
+		scom411 = &scom411;
+		scom414 = &scom414;
+		scom415 = &scom415;
+		scom416 = &scom416;
+		scom417 = &scom417;
+
+		spi30 = &cfam2_spi0;
+		spi31 = &cfam2_spi1;
+		spi32 = &cfam2_spi2;
+		spi33 = &cfam2_spi3;
+		spi40 = &cfam3_spi0;
+		spi41 = &cfam3_spi1;
+		spi42 = &cfam3_spi2;
+		spi43 = &cfam3_spi3;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi
new file mode 100644
index 000000000000..6db02d475380
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi
@@ -0,0 +1,779 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2025 IBM Corp.
+
+/ {
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c115 = &cfam0_i2c15;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c214 = &cfam1_i2c14;
+		i2c215 = &cfam1_i2c15;
+		i2c216 = &cfam1_i2c16;
+		i2c217 = &cfam1_i2c17;
+
+		sbefifo100 = &sbefifo100;
+		sbefifo101 = &sbefifo101;
+		sbefifo110 = &sbefifo110;
+		sbefifo111 = &sbefifo111;
+		sbefifo112 = &sbefifo112;
+		sbefifo113 = &sbefifo113;
+		sbefifo114 = &sbefifo114;
+		sbefifo115 = &sbefifo115;
+		sbefifo202 = &sbefifo202;
+		sbefifo203 = &sbefifo203;
+		sbefifo210 = &sbefifo210;
+		sbefifo211 = &sbefifo211;
+		sbefifo214 = &sbefifo214;
+		sbefifo215 = &sbefifo215;
+		sbefifo216 = &sbefifo216;
+		sbefifo217 = &sbefifo217;
+
+		scom100 = &scom100;
+		scom101 = &scom101;
+		scom110 = &scom110;
+		scom111 = &scom111;
+		scom112 = &scom112;
+		scom113 = &scom113;
+		scom114 = &scom114;
+		scom115 = &scom115;
+		scom202 = &scom202;
+		scom203 = &scom203;
+		scom210 = &scom210;
+		scom211 = &scom211;
+		scom214 = &scom214;
+		scom215 = &scom215;
+		scom216 = &scom216;
+		scom217 = &scom217;
+
+		spi10 = &cfam0_spi0;
+		spi11 = &cfam0_spi1;
+		spi12 = &cfam0_spi2;
+		spi13 = &cfam0_spi3;
+		spi20 = &cfam1_spi0;
+		spi21 = &cfam1_spi1;
+		spi22 = &cfam1_spi2;
+		spi23 = &cfam1_spi3;
+	};
+};
+
+&fsim0 {
+	bus-frequency = <100000000>;
+	#address-cells = <2>;
+	#size-cells = <0>;
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OMI01 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom100: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo100: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OMI23 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom101: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo101: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom110: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo110: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom111: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo111: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom112: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo112: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom113: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo113: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom114: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo114: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom115: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo115: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam0_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam0_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam0_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub0: fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OMI45 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom202: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo202: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OMI67 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom203: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo203: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom210: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo210: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom211: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo211: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom214: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo214: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom215: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo215: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom216: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo216: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom217: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo217: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam1_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam1_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam1_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi b/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi
new file mode 100644
index 000000000000..7aa4113d3026
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi
@@ -0,0 +1,774 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+
+#include "ibm-power11-dual.dtsi"
+
+/ {
+	aliases {
+		i2c300 = &cfam2_i2c0;
+		i2c301 = &cfam2_i2c1;
+		i2c310 = &cfam2_i2c10;
+		i2c311 = &cfam2_i2c11;
+		i2c312 = &cfam2_i2c12;
+		i2c313 = &cfam2_i2c13;
+		i2c314 = &cfam2_i2c14;
+		i2c315 = &cfam2_i2c15;
+		i2c402 = &cfam3_i2c2;
+		i2c403 = &cfam3_i2c3;
+		i2c410 = &cfam3_i2c10;
+		i2c411 = &cfam3_i2c11;
+		i2c414 = &cfam3_i2c14;
+		i2c415 = &cfam3_i2c15;
+		i2c416 = &cfam3_i2c16;
+		i2c417 = &cfam3_i2c17;
+
+		sbefifo300 = &sbefifo300;
+		sbefifo301 = &sbefifo301;
+		sbefifo310 = &sbefifo310;
+		sbefifo311 = &sbefifo311;
+		sbefifo312 = &sbefifo312;
+		sbefifo313 = &sbefifo313;
+		sbefifo314 = &sbefifo314;
+		sbefifo315 = &sbefifo315;
+		sbefifo402 = &sbefifo402;
+		sbefifo403 = &sbefifo403;
+		sbefifo410 = &sbefifo410;
+		sbefifo411 = &sbefifo411;
+		sbefifo414 = &sbefifo414;
+		sbefifo415 = &sbefifo415;
+		sbefifo416 = &sbefifo416;
+		sbefifo417 = &sbefifo417;
+
+		scom300 = &scom300;
+		scom301 = &scom301;
+		scom310 = &scom310;
+		scom311 = &scom311;
+		scom312 = &scom312;
+		scom313 = &scom313;
+		scom314 = &scom314;
+		scom315 = &scom315;
+		scom402 = &scom402;
+		scom403 = &scom403;
+		scom410 = &scom410;
+		scom411 = &scom411;
+		scom414 = &scom414;
+		scom415 = &scom415;
+		scom416 = &scom416;
+		scom417 = &scom417;
+
+		spi30 = &cfam2_spi0;
+		spi31 = &cfam2_spi1;
+		spi32 = &cfam2_spi2;
+		spi33 = &cfam2_spi3;
+		spi40 = &cfam3_spi0;
+		spi41 = &cfam3_spi1;
+		spi42 = &cfam3_spi2;
+		spi43 = &cfam3_spi3;
+	};
+};
+
+&fsi_hub0 {
+	cfam@2,0 {
+		reg = <2 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <2>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom300: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo300: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom301: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo301: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom310: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo310: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom311: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo311: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom312: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo312: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom313: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo313: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom314: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo314: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom315: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo315: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam2_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam2_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam2_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+
+	cfam@3,0 {
+		reg = <3 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <3>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom402: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo402: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom403: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo403: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom410: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo410: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom411: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo411: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom414: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo414: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom415: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo415: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom416: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo416: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom417: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo417: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam3_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam3_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam3_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/ibm-power9-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power9-dual.dtsi
new file mode 100644
index 000000000000..a0fa65b44b0f
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ibm-power9-dual.dtsi
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2018 IBM Corp
+
+&fsi {
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;
+			};
+
+			cfam0_i2c2: i2c-bus@2 {
+				reg = <2>;
+			};
+
+			cfam0_i2c3: i2c-bus@3 {
+				reg = <3>;
+			};
+
+			cfam0_i2c4: i2c-bus@4 {
+				reg = <4>;
+			};
+
+			cfam0_i2c5: i2c-bus@5 {
+				reg = <5>;
+			};
+
+			cfam0_i2c6: i2c-bus@6 {
+				reg = <6>;
+			};
+
+			cfam0_i2c7: i2c-bus@7 {
+				reg = <7>;
+			};
+
+			cfam0_i2c8: i2c-bus@8 {
+				reg = <8>;
+			};
+
+			cfam0_i2c9: i2c-bus@9 {
+				reg = <9>;
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ@1 {
+				compatible = "ibm,p9-occ";
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c0: i2c-bus@0 {
+				reg = <0>;
+			};
+
+			cfam1_i2c1: i2c-bus@1 {
+				reg = <1>;
+			};
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;
+			};
+
+			cfam1_i2c4: i2c-bus@4 {
+				reg = <4>;
+			};
+
+			cfam1_i2c5: i2c-bus@5 {
+				reg = <5>;
+			};
+
+			cfam1_i2c6: i2c-bus@6 {
+				reg = <6>;
+			};
+
+			cfam1_i2c7: i2c-bus@7 {
+				reg = <7>;
+			};
+
+			cfam1_i2c8: i2c-bus@8 {
+				reg = <8>;
+			};
+
+			cfam1_i2c9: i2c-bus@9 {
+				reg = <9>;
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;
+			};
+
+			cfam1_i2c12: i2c-bus@c {
+				reg = <12>;
+			};
+
+			cfam1_i2c13: i2c-bus@d {
+				reg = <13>;
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ@2 {
+				compatible = "ibm,p9-occ";
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ0 {
+	reg = <1>;
+};
+
+&fsi_occ1 {
+	reg = <2>;
+};
+
+/ {
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c102 = &cfam0_i2c2;
+		i2c103 = &cfam0_i2c3;
+		i2c104 = &cfam0_i2c4;
+		i2c105 = &cfam0_i2c5;
+		i2c106 = &cfam0_i2c6;
+		i2c107 = &cfam0_i2c7;
+		i2c108 = &cfam0_i2c8;
+		i2c109 = &cfam0_i2c9;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c200 = &cfam1_i2c0;
+		i2c201 = &cfam1_i2c1;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c204 = &cfam1_i2c4;
+		i2c205 = &cfam1_i2c5;
+		i2c206 = &cfam1_i2c6;
+		i2c207 = &cfam1_i2c7;
+		i2c208 = &cfam1_i2c8;
+		i2c209 = &cfam1_i2c9;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c212 = &cfam1_i2c12;
+		i2c213 = &cfam1_i2c13;
+		i2c214 = &cfam1_i2c14;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/openbmc-flash-layout-128.dtsi b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-128.dtsi
new file mode 100644
index 000000000000..05101a38c5bd
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-128.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	u-boot@0 {
+		reg = <0x0 0xe0000>; // 896KB
+		label = "u-boot";
+	};
+
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x20000>; // 128KB
+		label = "u-boot-env";
+	};
+
+	kernel@100000 {
+		reg = <0x100000 0x900000>; // 9MB
+		label = "kernel";
+	};
+
+	rofs@a00000 {
+		reg = <0xa00000 0x5600000>; // 86MB
+		label = "rofs";
+	};
+
+	rwfs@6000000 {
+		reg = <0x6000000 0x2000000>; // 32MB
+		label = "rwfs";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64-alt.dtsi b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64-alt.dtsi
new file mode 100644
index 000000000000..650525867561
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64-alt.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Bytedance.
+ */
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	u-boot@0 {
+		reg = <0x0 0xe0000>; // 896KB
+		label = "alt-u-boot";
+	};
+
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x20000>; // 128KB
+		label = "alt-u-boot-env";
+	};
+
+	kernel@100000 {
+		reg = <0x100000 0x900000>; // 9MB
+		label = "alt-kernel";
+	};
+
+	rofs@a00000 {
+		reg = <0xa00000 0x2000000>; // 32MB
+		label = "alt-rofs";
+	};
+
+	rwfs@6000000 {
+		reg = <0x2a00000 0x1600000>; // 22MB
+		label = "alt-rwfs";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64.dtsi b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64.dtsi
new file mode 100644
index 000000000000..7af41361c480
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Bytedance.
+ */
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	u-boot@0 {
+		reg = <0x0 0xe0000>; // 896KB
+		label = "u-boot";
+	};
+
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x20000>; // 128KB
+		label = "u-boot-env";
+	};
+
+	kernel@100000 {
+		reg = <0x100000 0x900000>; // 9MB
+		label = "kernel";
+	};
+
+	rofs@a00000 {
+		reg = <0xa00000 0x2000000>; // 32MB
+		label = "rofs";
+	};
+
+	rwfs@2a00000 {
+		reg = <0x2a00000 0x1600000>; // 22MB
+		label = "rwfs";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/openbmc-flash-layout.dtsi b/arch/arm/boot/dts/aspeed/openbmc-flash-layout.dtsi
new file mode 100644
index 000000000000..b47e14063c38
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/openbmc-flash-layout.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	u-boot@0 {
+		reg = <0x0 0x60000>;
+		label = "u-boot";
+	};
+
+	u-boot-env@60000 {
+		reg = <0x60000 0x20000>;
+		label = "u-boot-env";
+	};
+
+	kernel@80000 {
+		reg = <0x80000 0x440000>;
+		label = "kernel";
+	};
+
+	rofs@4c0000 {
+		reg = <0x4c0000 0x1740000>;
+		label = "rofs";
+	};
+
+	rwfs@1c00000 {
+		reg = <0x1c00000 0x400000>;
+		label = "rwfs";
+	};
+};
diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts
deleted file mode 100644
index 4da011a7a698..000000000000
--- a/arch/arm/boot/dts/at91-ariag25.dts
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * at91-ariag25.dts - Device Tree file for Acme Systems Aria G25 (AT91SAM9G25 based)
- *
- * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>,
- *                    Robert Nelson <robertcnelson@gmail.com>
- *
- * Licensed under GPLv2 or later.
- */
-/dts-v1/;
-#include "at91sam9g25.dtsi"
-
-/ {
-	model = "Acme Systems Aria G25";
-	compatible = "acme,ariag25", "atmel,at91sam9x5ek",
-		     "atmel,at91sam9x5", "atmel,at91sam9";
-
-	aliases {
-		serial0 = &dbgu;
-		serial1 = &usart0;
-		serial2 = &usart1;
-		serial3 = &usart2;
-		serial4 = &usart3;
-		serial5 = &uart0;
-		serial6 = &uart1;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
-	};
-
-	memory {
-		/* 128 MB, change this for 256 MB revision */
-		reg = <0x20000000 0x8000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			mmc0: mmc@f0008000 {
-				/* N.B. Aria has no SD card detect (CD), assumed present */
-
-				pinctrl-0 = <
-					&pinctrl_mmc0_slot0_clk_cmd_dat0
-					&pinctrl_mmc0_slot0_dat1_3>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-				};
-			};
-
-			i2c0: i2c@f8010000 {
-				status = "okay";
-			};
-
-			i2c1: i2c@f8014000 {
-				status = "okay";
-			};
-
-			/* TWD2+TCLK2 hidden behind ethernet, so no i2c2 */
-
-			usart0: serial@f801c000 {
-				pinctrl-0 = <&pinctrl_usart0
-					     &pinctrl_usart0_rts
-					     &pinctrl_usart0_cts>;
-				status = "okay";
-			};
-
-			usart1: serial@f8020000 {
-				pinctrl-0 = <&pinctrl_usart1
-					     /* &pinctrl_usart1_rts */
-					     /* &pinctrl_usart1_cts */
-					    >;
-				status = "okay";
-			};
-
-			usart2: serial@f8024000 {
-				/* cannot activate RTS2+CTS2, clash with
-				 * ethernet on PB0 and PB1 */
-				pinctrl-0 = <&pinctrl_usart2>;
-				status = "okay";
-			};
-
-			usart3: serial@f8028000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf8028000 0x200>;
-				interrupts = <8 4 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart3
-					     /* &pinctrl_usart3_rts */
-					     /* &pinctrl_usart3_cts */
-					    >;
-				status = "okay";
-			};
-
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				/*
-				 * following can be overwritten by bootloader:
-				 * for example u-boot 'ftd set' command
-				 */
-				local-mac-address = [00 00 00 00 00 00];
-				status = "okay";
-			};
-
-			/*
-			 * UART0/1 pins are marked as GPIO on
-			 * Aria documentation.
-			 * Change to "okay" if you need additional serial ports
-			 */
-			uart0: serial@f8040000 {
-				status = "disabled";
-			};
-
-			uart1: serial@f8044000 {
-				status = "disabled";
-			};
-
-			adc0: adc@f804c000 {
-				status = "okay";
-				atmel,adc-channels-used = <0xf>;
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			pinctrl@fffff400 {
-				w1_0 {
-					pinctrl_w1_0: w1_0-0 {
-						atmel,pins = <0 21 0x0 0x1>; /* PA21 PIO, pull-up */
-					};
-				};
-			};
-
-			rtc@fffffeb0 {
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@00600000 {
-			status = "okay";
-			num-ports = <3>;
-		};
-
-		usb1: ehci@00700000 {
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		/* little green LED in middle of Aria G25 module */
-		aria_led {
-			label = "aria_led";
-			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
-			linux,default-trigger = "heartbeat";
-		};
-
-	};
-
-	onewire {
-		compatible = "w1-gpio";
-		gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_w1_0>;
-	};
-};
diff --git a/arch/arm/boot/dts/at91-ariettag25.dts b/arch/arm/boot/dts/at91-ariettag25.dts
deleted file mode 100644
index c514502081d2..000000000000
--- a/arch/arm/boot/dts/at91-ariettag25.dts
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Device Tree file for Arietta G25
- * This device tree is minimal, to activate more peripherals, see:
- * http://dts.acmesystems.it/arietta/
- */
-/dts-v1/;
-#include "at91sam9g25.dtsi"
-/ {
-	model = "Acme Systems Arietta G25";
-	compatible = "acme,ariettag25", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	aliases {
-		serial0 = &dbgu;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		reg = <0x20000000 0x8000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			mmc0: mmc@f0008000 {
-				pinctrl-0 = <
-				  &pinctrl_mmc0_slot0_clk_cmd_dat0
-				  &pinctrl_mmc0_slot0_dat1_3>;
-				status = "okay";
-
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-				};
-			};
-
-			usb2: gadget@f803c000 {
-				status = "okay";
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			rtc@fffffeb0 {
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@00600000 {
-			status = "okay";
-			num-ports = <3>;
-		};
-
-		usb1: ehci@00700000 {
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		arietta_led {
-			label = "arietta_led";
-			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi
deleted file mode 100644
index 89cde175154e..000000000000
--- a/arch/arm/boot/dts/at91-cosino.dtsi
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * at91-cosino.dtsi - Device Tree file for Cosino core module
- *
- * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
- *			HCE Engineering
- *
- * Derived from at91sam9x5ek.dtsi by:
- *	Copyright (C) 2012 Atmel,
- *	2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-#include "at91sam9g35.dtsi"
-
-/ {
-	model = "HCE Cosino core module";
-	compatible = "hce,cosino", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait";
-	};
-
-	memory {
-		reg = <0x20000000 0x8000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			mmc0: mmc@f0008000 {
-				pinctrl-0 = <
-					&pinctrl_board_mmc0
-					&pinctrl_mmc0_slot0_clk_cmd_dat0
-					&pinctrl_mmc0_slot0_dat1_3>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			usart0: serial@f801c000 {
-				status = "okay";
-			};
-
-			i2c0: i2c@f8010000 {
-				status = "okay";
-			};
-
-			adc0: adc@f804c000 {
-				atmel,adc-ts-wires = <4>;
-				atmel,adc-ts-pressure-threshold = <10000>;
-				status = "okay";
-			};
-
-			pinctrl@fffff400 {
-				mmc0 {
-					pinctrl_board_mmc0: mmc0-board {
-						atmel,pins =
-							<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
-					};
-				};
-			};
-
-			watchdog@fffffe40 {
-				status = "okay";
-			};
-		};
-
-		ebi: ebi@10000000 {
-			pinctrl-0 = <&pinctrl_ebi_addr_nand
-				     &pinctrl_ebi_data_0_7>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_nand_oe_we
-					     &pinctrl_nand_cs
-					     &pinctrl_nand_rb>;
-				pinctrl-names = "default";
-
-				nand@3 {
-					reg = <0x3 0x0 0x800000>;
-					rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "hw";
-					nand-ecc-strength = <4>;
-					nand-ecc-step-size = <512>;
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						at91bootstrap@0 {
-							label = "at91bootstrap";
-							reg = <0x0 0x40000>;
-						};
-
-						uboot@40000 {
-							label = "u-boot";
-							reg = <0x40000 0x80000>;
-						};
-
-						ubootenv@c0000 {
-							label = "U-Boot Env";
-							reg = <0xc0000 0x140000>;
-						};
-
-						kernel@200000 {
-							label = "kernel";
-							reg = <0x200000 0x600000>;
-						};
-
-						rootfs@800000 {
-							label = "rootfs";
-							reg = <0x800000 0x0f800000>;
-						};
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts
deleted file mode 100644
index 27ebb0f722fd..000000000000
--- a/arch/arm/boot/dts/at91-cosino_mega2560.dts
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * at91-cosino_mega2560.dts - Device Tree file for Cosino board with
- *			      Mega 2560 extension
- *
- * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
- *			HCE Engineering
- *
- * Derived from at91sam9g35ek.dts by:
- * 	Copyright (C) 2012 Atmel,
- *      2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-/dts-v1/;
-#include "at91-cosino.dtsi"
-
-/ {
-	model = "HCE Cosino Mega 2560";
-	compatible = "hce,cosino_mega2560", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	ahb {
-		apb {
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			adc0: adc@f804c000 {
-				atmel,adc-ts-wires = <4>;
-				atmel,adc-ts-pressure-threshold = <10000>;
-				status = "okay";
-			};
-
-			rtc@fffffeb0 {
-				status = "okay";
-			};
-
-			usart1: serial@f8020000 {
-				status = "okay";
-			};
-
-			usart2: serial@f8024000 {
-				status = "okay";
-			};
-
-			usb2: gadget@f803c000 {
-				atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-
-			mmc1: mmc@f000c000 {
-				pinctrl-0 = <
-					&pinctrl_mmc1_slot0_clk_cmd_dat0
-					&pinctrl_mmc1_slot0_dat1_3>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					non-removable;
-				};
-			};
-		};
-
-		usb0: ohci@00600000 {
-			status = "okay";
-			num-ports = <3>;
-			atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */
-					   &pioD 19 GPIO_ACTIVE_LOW
-					   &pioD 20 GPIO_ACTIVE_LOW
-					  >;
-		};
-
-		usb1: ehci@00700000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
deleted file mode 100644
index 1f31df846d61..000000000000
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board
- *
- * Copyright (C) 2012-2014 Boris BREZILLON <b.brezillon@overkiz.com>
- *               2014-2015 Gaël PORTAY <g.portay@overkiz.com>
- *
- * Licensed under GPLv2 or later.
- */
-/dts-v1/;
-#include "at91sam9g20.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Overkiz Kizbox";
-	compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "ubi.mtd=ubi";
-		stdout-path = &dbgu;
-	};
-
-	memory {
-		reg = <0x20000000 0x2000000>;
-	};
-
-	clocks {
-		main_xtal {
-			clock-frequency = <18432000>;
-		};
-	};
-
-	ahb {
-		apb {
-			macb0: ethernet@fffc4000 {
-				phy-mode = "mii";
-				pinctrl-0 = <&pinctrl_macb_rmii
-				             &pinctrl_macb_rmii_mii_alt>;
-				status = "okay";
-			};
-
-			usart3: serial@fffd0000 {
-				status = "okay";
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			watchdog@fffffd40 {
-				timeout-sec = <15>;
-				atmel,max-heartbeat-sec = <16>;
-				atmel,min-heartbeat-sec = <0>;
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@500000 {
-			num-ports = <1>;
-			status = "okay";
-		};
-
-		ebi: ebi@10000000 {
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
-				pinctrl-names = "default";
-
-				nand@3 {
-					reg = <0x3 0x0 0x800000>;
-					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "soft";
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						bootstrap@0 {
-							label = "bootstrap";
-							reg = <0x0 0x20000>;
-						};
-
-						ubi@20000 {
-							label = "ubi";
-							reg = <0x20000 0x7fe0000>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reset {
-			label = "PB_RST";
-			gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
-			linux,code = <0x100>;
-			wakeup-source;
-		};
-
-		user {
-			label = "PB_USER";
-			gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
-			linux,code = <0x101>;
-			wakeup-source;
-		};
-	};
-
-	i2c-gpio-0 {
-		status = "okay";
-
-		rtc: pcf8563@51 {
-			compatible = "nxp,pcf8563";
-			reg = <0x51>;
-		};
-	};
-
-	pwm_leds {
-		compatible = "pwm-leds";
-
-		network_green {
-			label = "pwm:green:network";
-			pwms = <&tcb_pwm 2 10000000 PWM_POLARITY_INVERTED>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-
-		network_red {
-			label = "pwm:red:network";
-			pwms = <&tcb_pwm 4 10000000 PWM_POLARITY_INVERTED>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-
-		user_green {
-			label = "pwm:green:user";
-			pwms = <&tcb_pwm 0 10000000 PWM_POLARITY_INVERTED>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-
-		user_red {
-			label = "pwm:red:user";
-			pwms = <&tcb_pwm 1 10000000 PWM_POLARITY_INVERTED>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	tcb_pwm: pwm {
-		compatible = "atmel,tcb-pwm";
-		#pwm-cells = <3>;
-		tc-block = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tcb1_tioa0
-			     &pinctrl_tcb1_tioa1
-			     &pinctrl_tcb1_tioa2
-			     &pinctrl_tcb1_tiob0>;
-	};
-};
diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts
deleted file mode 100644
index 4372c0287c1c..000000000000
--- a/arch/arm/boot/dts/at91-kizbox2.dts
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * at91-kizbox2.dts - Device Tree file for Overkiz Kizbox 2 board
- *
- * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
- *
- * Licensed under GPLv2 or later.
- */
-/dts-v1/;
-#include "sama5d31.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Overkiz Kizbox 2";
-	compatible = "overkiz,kizbox2", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
-
-	chosen {
-		bootargs = "ubi.mtd=ubi";
-		stdout-path = &dbgu;
-	};
-
-	memory {
-		reg = <0x20000000 0x10000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			i2c1: i2c@f0018000 {
-				status = "okay";
-
-				pmic: act8865@5b {
-					compatible = "active-semi,act8865";
-					reg = <0x5b>;
-					status = "okay";
-
-					regulators {
-						vcc_1v8_reg: DCDC_REG1 {
-							regulator-name = "VCC_1V8";
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <1800000>;
-							regulator-always-on;
-						};
-
-						vcc_1v2_reg: DCDC_REG2 {
-							regulator-name = "VCC_1V2";
-							regulator-min-microvolt = <1200000>;
-							regulator-max-microvolt = <1200000>;
-							regulator-always-on;
-						};
-
-						vcc_3v3_reg: DCDC_REG3 {
-							regulator-name = "VCC_3V3";
-							regulator-min-microvolt = <3300000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-
-						vddfuse_reg: LDO_REG1 {
-							regulator-name = "FUSE_2V5";
-							regulator-min-microvolt = <2500000>;
-							regulator-max-microvolt = <2500000>;
-						};
-
-						vddana_reg: LDO_REG2 {
-							regulator-name = "VDDANA";
-							regulator-min-microvolt = <3300000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-
-						vled_reg: LDO_REG3 {
-							regulator-name = "VLED";
-							regulator-min-microvolt = <3300000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-
-						v3v8_rf_reg: LDO_REG4 {
-							regulator-name = "V3V8_RF";
-							regulator-min-microvolt = <3800000>;
-							regulator-max-microvolt = <3800000>;
-							regulator-always-on;
-						};
-					};
-				};
-			};
-
-			usart0: serial@f001c000 {
-				status = "okay";
-			};
-
-			usart1: serial@f0020000 {
-				status = "okay";
-			};
-
-			pwm0: pwm@f002c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_pwm0_pwmh0_1
-					     &pinctrl_pwm0_pwmh1_1
-					     &pinctrl_pwm0_pwmh2_0>;
-				status = "okay";
-			};
-
-			adc0: adc@f8018000 {
-				atmel,adc-vref = <3333>;
-				status = "okay";
-			};
-
-			usart2: serial@f8020000 {
-				status = "okay";
-			};
-
-			macb1: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			dbgu: serial@ffffee00 {
-				status = "okay";
-			};
-
-			watchdog@fffffe40 {
-				status = "okay";
-			};
-		};
-
-		usb1: ohci@00600000 {
-			status = "okay";
-		};
-
-		usb2: ehci@00700000 {
-			status = "okay";
-		};
-
-		ebi: ebi@10000000 {
-			pinctrl-0 = <&pinctrl_ebi_nand_addr>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-
-				nand@3 {
-					reg = <0x3 0x0 0x2>;
-					atmel,rb = <0>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "hw";
-					nand-ecc-strength = <4>;
-					nand-ecc-step-size = <512>;
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						bootstrap@0 {
-							label = "bootstrap";
-							reg = <0x0 0x20000>;
-						};
-
-						ubi@20000 {
-							label = "ubi";
-							reg = <0x20000 0x7fe0000>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		prog {
-			label = "PB_PROG";
-			gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
-			linux,code = <0x102>;
-			wakeup-source;
-		};
-
-		reset {
-			label = "PB_RST";
-			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
-			linux,code = <0x100>;
-			wakeup-source;
-		};
-
-		user {
-			label = "PB_USER";
-			gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
-			linux,code = <0x101>;
-			wakeup-source;
-		};
-	};
-
-	pwm_leds {
-		compatible = "pwm-leds";
-
-		blue {
-			label = "pwm:blue:user";
-			pwms = <&pwm0 2 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-
-		green {
-			label = "pwm:green:user";
-			pwms = <&pwm0 1 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-
-		red {
-			label = "pwm:red:user";
-			pwms = <&pwm0 0 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts
deleted file mode 100644
index 33238fcb6d0b..000000000000
--- a/arch/arm/boot/dts/at91-kizboxmini.dts
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
- *
- * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
- *
- * Licensed under GPLv2 or later.
- */
-/dts-v1/;
-#include "at91sam9g25.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Overkiz Kizbox mini";
-	compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "ubi.mtd=ubi";
-		stdout-path = &dbgu;
-	};
-
-	memory {
-		reg = <0x20000000 0x8000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			usart0: serial@f801c000 {
-				status = "okay";
-			};
-
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			pwm0: pwm@f8034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_pwm0_pwm0_1
-					     &pinctrl_pwm0_pwm1_1>;
-				status = "okay";
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			watchdog@fffffe40 {
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@00600000 {
-			num-ports = <1>;
-			status = "okay";
-		};
-
-		usb1: ehci@00700000 {
-			status = "okay";
-		};
-
-		ebi: ebi@10000000 {
-			pinctrl-0 = <&pinctrl_ebi_addr_nand
-				     &pinctrl_ebi_data_0_7>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_nand_oe_we
-					     &pinctrl_nand_cs
-					     &pinctrl_nand_rb>;
-				pinctrl-names = "default";
-
-				nand@3 {
-					reg = <0x3 0x0 0x800000>;
-					rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "hw";
-					nand-ecc-strength = <4>;
-					nand-ecc-step-size = <512>;
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						bootstrap@0 {
-							label = "bootstrap";
-							reg = <0x0 0x20000>;
-						};
-
-						ubi@20000 {
-							label = "ubi";
-							reg = <0x20000 0x7fe0000>;
-						};
-					};
-				};
-			};
-		};
-
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			atmel,has-pmecc;
-			atmel,pmecc-cap = <4>;
-			atmel,pmecc-sector-size = <512>;
-			nand-on-flash-bbt;
-			status = "okay";
-
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		prog {
-			label = "PB_PROG";
-			gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
-			linux,code = <0x102>;
-			wakeup-source;
-		};
-
-		reset {
-			label = "PB_RST";
-			gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
-			linux,code = <0x100>;
-			wakeup-source;
-		};
-	};
-
-	pwm_leds {
-		compatible = "pwm-leds";
-
-		green {
-			label = "pwm:green:user";
-			pwms = <&pwm0 0 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-
-		red {
-			label = "pwm:red:user";
-			pwms = <&pwm0 1 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
deleted file mode 100644
index 2e2c3d1a1fa2..000000000000
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ /dev/null
@@ -1,534 +0,0 @@
-/*
- * at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board
- *
- *  Copyright (C) 2015 Atmel,
- *                2015 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-#include "sama5d2.dtsi"
-#include "sama5d2-pinfunc.h"
-#include <dt-bindings/mfd/atmel-flexcom.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Atmel SAMA5D2 Xplained";
-	compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		usb0: gadget@00300000 {
-			atmel,vbus-gpio = <&pioA 31 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usba_vbus>;
-			status = "okay";
-		};
-
-		usb1: ohci@00400000 {
-			num-ports = <3>;
-			atmel,vbus-gpio = <0 /* &pioA 41 GPIO_ACTIVE_HIGH */
-					   &pioA 42 GPIO_ACTIVE_HIGH
-					   0
-					  >;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb_default>;
-			status = "okay";
-		};
-
-		usb2: ehci@00500000 {
-			status = "okay";
-		};
-
-		sdmmc0: sdio-host@a0000000 {
-			bus-width = <8>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_sdmmc0_default>;
-			non-removable;
-			mmc-ddr-1_8v;
-			status = "okay";
-		};
-
-		sdmmc1: sdio-host@b0000000 {
-			bus-width = <4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_sdmmc1_default>;
-			status = "okay"; /* conflict with qspi0 */
-		};
-
-		apb {
-			spi0: spi@f8000000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0_default>;
-				status = "okay";
-
-				m25p80@0 {
-					compatible = "atmel,at25df321a";
-					reg = <0>;
-					spi-max-frequency = <50000000>;
-				};
-			};
-
-			macb0: ethernet@f8008000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
-				phy-mode = "rmii";
-				status = "okay";
-
-				ethernet-phy@1 {
-					reg = <0x1>;
-					interrupt-parent = <&pioA>;
-					interrupts = <73 IRQ_TYPE_LEVEL_LOW>;
-				};
-			};
-
-			pdmic@f8018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_pdmic_default>;
-				atmel,model = "PDMIC @ sama5d2_xplained";
-				atmel,mic-min-freq = <1000000>;
-				atmel,mic-max-freq = <3246000>;
-				atmel,mic-offset = <0x0>;
-				status = "okay";
-			};
-
-			uart1: serial@f8020000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart1_default>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "okay";
-			};
-
-			i2c0: i2c@f8028000 {
-				dmas = <0>, <0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c0_default>;
-				i2c-sda-hold-time-ns = <350>;
-				status = "okay";
-
-				pmic@5b {
-					compatible = "active-semi,act8945a";
-					reg = <0x5b>;
-					active-semi,vsel-high;
-					active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
-					active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
-					active-semi,irq_gpios = <&pioA 45 GPIO_ACTIVE_LOW>;
-					active-semi,input-voltage-threshold-microvolt = <6600>;
-					active-semi,precondition-timeout = <40>;
-					active-semi,total-timeout = <3>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
-					status = "okay";
-
-					regulators {
-						vdd_1v35_reg: REG_DCDC1 {
-							regulator-name = "VDD_1V35";
-							regulator-min-microvolt = <1350000>;
-							regulator-max-microvolt = <1350000>;
-							regulator-always-on;
-						};
-
-						vdd_1v2_reg: REG_DCDC2 {
-							regulator-name = "VDD_1V2";
-							regulator-min-microvolt = <1100000>;
-							regulator-max-microvolt = <1300000>;
-							regulator-always-on;
-						};
-
-						vdd_3v3_reg: REG_DCDC3 {
-							regulator-name = "VDD_3V3";
-							regulator-min-microvolt = <3300000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-
-						vdd_fuse_reg: REG_LDO1 {
-							regulator-name = "VDD_FUSE";
-							regulator-min-microvolt = <2500000>;
-							regulator-max-microvolt = <2500000>;
-							regulator-always-on;
-						};
-
-						vdd_3v3_lp_reg: REG_LDO2 {
-							regulator-name = "VDD_3V3_LP";
-							regulator-min-microvolt = <3300000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-
-						vdd_led_reg: REG_LDO3 {
-							regulator-name = "VDD_LED";
-							regulator-min-microvolt = <3300000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-
-						vdd_sdhc_1v8_reg: REG_LDO4 {
-							regulator-name = "VDD_SDHC_1V8";
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <1800000>;
-							regulator-always-on;
-						};
-					};
-				};
-			};
-
-			pwm0: pwm@f802c000 {
-				status = "okay";
-			};
-
-			flx0: flexcom@f8034000 {
-				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-				status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
-
-				uart5: serial@200 {
-					compatible = "atmel,at91sam9260-usart";
-					reg = <0x200 0x200>;
-					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
-					clocks = <&flx0_clk>;
-					clock-names = "usart";
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_flx0_default>;
-					atmel,fifo-size = <32>;
-					status = "okay";
-				};
-			};
-
-			shdwc@f8048010 {
-				atmel,shdwc-debouncer = <976>;
-				atmel,wakeup-rtc-timer;
-
-				input@0 {
-					reg = <0>;
-					atmel,wakeup-type = "low";
-				};
-			};
-
-			watchdog@f8048040 {
-				status = "okay";
-			};
-
-			can0: can@f8054000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_can0_default>;
-				status = "okay";
-			};
-
-			uart3: serial@fc008000 {
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart3_default>;
-				status = "okay";
-			};
-
-			flx4: flexcom@fc018000 {
-				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-				status = "okay";
-
-				i2c2: i2c@600 {
-					compatible = "atmel,sama5d2-i2c";
-					reg = <0x600 0x200>;
-					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
-					dmas = <0>, <0>;
-					dma-names = "tx", "rx";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&flx4_clk>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_flx4_default>;
-					atmel,fifo-size = <16>;
-					status = "okay";
-				};
-			};
-
-			i2c1: i2c@fc028000 {
-				dmas = <0>, <0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c1_default>;
-				status = "okay";
-
-				at24@54 {
-					compatible = "atmel,24c02";
-					reg = <0x54>;
-					pagesize = <16>;
-				};
-			};
-
-			adc: adc@fc030000 {
-				vddana-supply = <&vdd_3v3_lp_reg>;
-				vref-supply = <&vdd_3v3_lp_reg>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_adc_default>;
-				status = "okay";
-			};
-
-			pinctrl@fc038000 {
-				/*
-				 * There is no real pinmux for ADC, if the pin
-				 * is not requested by another peripheral then
-				 * the muxing is done when channel is enabled.
-				 * Requesting pins for ADC is GPIO is
-				 * encouraged to prevent conflicts and to
-				 * disable bias in order to be in the same
-				 * state when the pin is not muxed to the adc.
-				 */
-				pinctrl_adc_default: adc_default {
-					pinmux = <PIN_PD23__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_can0_default: can0_default {
-					pinmux = <PIN_PC10__CANTX0>,
-						 <PIN_PC11__CANRX0>;
-					bias-disable;
-				};
-
-				pinctrl_can1_default: can1_default {
-					pinmux = <PIN_PC26__CANTX1>,
-						 <PIN_PC27__CANRX1>;
-					bias-disable;
-				};
-
-				pinctrl_charger_chglev: charger_chglev {
-					pinmux = <PIN_PA12__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_charger_irq: charger_irq {
-					pinmux = <PIN_PB13__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_charger_lbo: charger_lbo {
-					pinmux = <PIN_PC8__GPIO>;
-					bias-pull-up;
-				};
-
-				pinctrl_flx0_default: flx0_default {
-					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
-						 <PIN_PB29__FLEXCOM0_IO1>;
-					bias-disable;
-				};
-
-				pinctrl_flx4_default: flx4_default {
-					pinmux = <PIN_PD12__FLEXCOM4_IO0>,
-						 <PIN_PD13__FLEXCOM4_IO1>;
-					bias-disable;
-				};
-
-				pinctrl_i2c0_default: i2c0_default {
-					pinmux = <PIN_PD21__TWD0>,
-						 <PIN_PD22__TWCK0>;
-					bias-disable;
-				};
-
-				pinctrl_i2c1_default: i2c1_default {
-					pinmux = <PIN_PD4__TWD1>,
-						 <PIN_PD5__TWCK1>;
-					bias-disable;
-				};
-
-				pinctrl_key_gpio_default: key_gpio_default {
-					pinmux = <PIN_PB9__GPIO>;
-					bias-pull-up;
-				};
-
-				pinctrl_led_gpio_default: led_gpio_default {
-					pinmux = <PIN_PB0__GPIO>,
-						 <PIN_PB5__GPIO>,
-						 <PIN_PB6__GPIO>;
-					bias-pull-up;
-				};
-
-				pinctrl_macb0_default: macb0_default {
-					pinmux = <PIN_PB14__GTXCK>,
-						 <PIN_PB15__GTXEN>,
-						 <PIN_PB16__GRXDV>,
-						 <PIN_PB17__GRXER>,
-						 <PIN_PB18__GRX0>,
-						 <PIN_PB19__GRX1>,
-						 <PIN_PB20__GTX0>,
-						 <PIN_PB21__GTX1>,
-						 <PIN_PB22__GMDC>,
-						 <PIN_PB23__GMDIO>;
-					bias-disable;
-				};
-
-				pinctrl_macb0_phy_irq: macb0_phy_irq {
-					pinmux = <PIN_PC9__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_pdmic_default: pdmic_default {
-					pinmux = <PIN_PB26__PDMIC_DAT>,
-						<PIN_PB27__PDMIC_CLK>;
-					bias-disable;
-				};
-
-				pinctrl_sdmmc0_default: sdmmc0_default {
-					cmd_data {
-						pinmux = <PIN_PA1__SDMMC0_CMD>,
-							 <PIN_PA2__SDMMC0_DAT0>,
-							 <PIN_PA3__SDMMC0_DAT1>,
-							 <PIN_PA4__SDMMC0_DAT2>,
-							 <PIN_PA5__SDMMC0_DAT3>,
-							 <PIN_PA6__SDMMC0_DAT4>,
-							 <PIN_PA7__SDMMC0_DAT5>,
-							 <PIN_PA8__SDMMC0_DAT6>,
-							 <PIN_PA9__SDMMC0_DAT7>;
-						bias-pull-up;
-					};
-
-					ck_cd_rstn_vddsel {
-						pinmux = <PIN_PA0__SDMMC0_CK>,
-							 <PIN_PA10__SDMMC0_RSTN>,
-							 <PIN_PA11__SDMMC0_VDDSEL>,
-							 <PIN_PA13__SDMMC0_CD>;
-						bias-disable;
-					};
-				};
-
-				pinctrl_sdmmc1_default: sdmmc1_default {
-					cmd_data {
-						pinmux = <PIN_PA28__SDMMC1_CMD>,
-							 <PIN_PA18__SDMMC1_DAT0>,
-							 <PIN_PA19__SDMMC1_DAT1>,
-							 <PIN_PA20__SDMMC1_DAT2>,
-							 <PIN_PA21__SDMMC1_DAT3>;
-						bias-pull-up;
-					};
-
-					conf-ck_cd {
-						pinmux = <PIN_PA22__SDMMC1_CK>,
-							 <PIN_PA30__SDMMC1_CD>;
-						bias-disable;
-					};
-				};
-
-				pinctrl_spi0_default: spi0_default {
-					pinmux = <PIN_PA14__SPI0_SPCK>,
-						 <PIN_PA15__SPI0_MOSI>,
-						 <PIN_PA16__SPI0_MISO>,
-						 <PIN_PA17__SPI0_NPCS0>;
-					bias-disable;
-				};
-
-				pinctrl_uart1_default: uart1_default {
-					pinmux = <PIN_PD2__URXD1>,
-						 <PIN_PD3__UTXD1>;
-					bias-disable;
-				};
-
-				pinctrl_uart3_default: uart3_default {
-					pinmux = <PIN_PB11__URXD3>,
-						 <PIN_PB12__UTXD3>;
-					bias-disable;
-				};
-
-				pinctrl_usb_default: usb_default {
-					pinmux = <PIN_PB10__GPIO>;
-					bias-disable;
-				};
-
-				pinctrl_usba_vbus: usba_vbus {
-					pinmux = <PIN_PA31__GPIO>;
-					bias-disable;
-				};
-
-			};
-
-			can1: can@fc050000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_can1_default>;
-				status = "okay";
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_key_gpio_default>;
-
-		bp1 {
-			label = "PB_USER";
-			gpios = <&pioA 41 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led_gpio_default>;
-		status = "okay";
-
-		red {
-			label = "red";
-			gpios = <&pioA 38 GPIO_ACTIVE_LOW>;
-		};
-
-		green {
-			label = "green";
-			gpios = <&pioA 37 GPIO_ACTIVE_LOW>;
-		};
-
-		blue {
-			label = "blue";
-			gpios = <&pioA 32 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
deleted file mode 100644
index cf712444b2c2..000000000000
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board
- *
- *  Copyright (C) 2015 Atmel,
- *                2015 Josh Wu <josh.wu@atmel.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-#include "sama5d4.dtsi"
-
-/ {
-	model = "Atmel SAMA5D4 Xplained";
-	compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		reg = <0x20000000 0x20000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			uart0: serial@f8004000 {
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "okay";
-			};
-
-			spi0: spi@f8010000 {
-				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
-				status = "okay";
-				m25p80@0 {
-					compatible = "atmel,at25df321a";
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-				};
-			};
-
-			i2c0: i2c@f8014000 {
-				status = "okay";
-			};
-
-			macb0: ethernet@f8020000 {
-				phy-mode = "rmii";
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
-
-				phy0: ethernet-phy@1 {
-					interrupt-parent = <&pioE>;
-					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-					reg = <1>;
-				};
-			};
-
-			mmc1: mmc@fc000000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
-				vmmc-supply = <&vcc_mmc1_reg>;
-				vqmmc-supply = <&vcc_3v3_reg>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioE 3 0>;
-				};
-			};
-
-			usart3: serial@fc00c000 {
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "okay";
-			};
-
-			usart4: serial@fc010000 {
-				status = "okay";
-			};
-
-			spi1: spi@fc018000 {
-				cs-gpios = <&pioB 21 0>;
-				status = "okay";
-			};
-
-			adc0: adc@fc034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <
-					/* external trigger conflicts with USBA_VBUS */
-					&pinctrl_adc0_ad0
-					&pinctrl_adc0_ad1
-					&pinctrl_adc0_ad2
-					&pinctrl_adc0_ad3
-					&pinctrl_adc0_ad4
-					>;
-				atmel,adc-vref = <3300>;
-				status = "okay";
-			};
-
-			watchdog@fc068640 {
-				status = "okay";
-			};
-
-			pinctrl@fc06a000 {
-				board {
-					pinctrl_mmc1_cd: mmc1_cd {
-						atmel,pins =
-							<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-					pinctrl_usba_vbus: usba_vbus {
-						atmel,pins =
-							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
-					};
-					pinctrl_key_gpio: key_gpio_0 {
-						atmel,pins =
-							<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-					pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
-						atmel,pins =
-							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-				};
-			};
-		};
-
-		usb0: gadget@00400000 {
-			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usba_vbus>;
-			status = "okay";
-		};
-
-		usb1: ohci@00500000 {
-			num-ports = <3>;
-			atmel,vbus-gpio = <0
-					   &pioE 11 GPIO_ACTIVE_HIGH
-					   &pioE 14 GPIO_ACTIVE_HIGH
-					  >;
-			status = "okay";
-		};
-
-		usb2: ehci@00600000 {
-			status = "okay";
-		};
-
-		ebi: ebi@10000000 {
-			pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe
-				     &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy
-				     &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-
-				nand@3 {
-					reg = <0x3 0x0 0x2>;
-					atmel,rb = <0>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "hw";
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						at91bootstrap@0 {
-							label = "at91bootstrap";
-							reg = <0x0 0x40000>;
-						};
-
-						bootloader@40000 {
-							label = "bootloader";
-							reg = <0x40000 0x80000>;
-						};
-
-						bootloaderenv@c0000 {
-							label = "bootloader env";
-							reg = <0xc0000 0xc0000>;
-						};
-
-						dtb@180000 {
-							label = "device tree";
-							reg = <0x180000 0x80000>;
-						};
-
-						kernel@200000 {
-							label = "kernel";
-							reg = <0x200000 0x600000>;
-						};
-
-						rootfs@800000 {
-							label = "rootfs";
-							reg = <0x800000 0x0f800000>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_key_gpio>;
-
-		pb_user1 {
-			label = "pb_user1";
-			gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
-			linux,code = <0x100>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		status = "okay";
-
-		d8 {
-			label = "d8";
-			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-
-		d10 {
-			label = "d10";
-			gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	vcc_3v3_reg: fixedregulator_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC 3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vcc_mmc1_reg: fixedregulator_mmc1 {
-		compatible = "regulator-fixed";
-		gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
-		regulator-name = "VDD MCI1";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_3v3_reg>;
-		regulator-always-on;
-	};
-};
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
deleted file mode 100644
index bae5248f126e..000000000000
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ /dev/null
@@ -1,348 +0,0 @@
-/*
- * at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit
- *
- *  Copyright (C) 2014 Atmel,
- *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-#include "sama5d4.dtsi"
-
-/ {
-	model = "Atmel SAMA5D4-EK";
-	compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		reg = <0x20000000 0x20000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			adc0: adc@fc034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <
-					/* external trigger conflicts with USBA_VBUS */
-					&pinctrl_adc0_ad0
-					&pinctrl_adc0_ad1
-					&pinctrl_adc0_ad2
-					&pinctrl_adc0_ad3
-					&pinctrl_adc0_ad4
-					>;
-				/* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */
-				atmel,adc-vref = <3300>;
-				/*atmel,adc-ts-wires = <4>;*/	/* Set up ADC touch screen */
-				status = "okay";		/* Enable ADC IIO support */
-			};
-
-			mmc0: mmc@f8000000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioE 5 0>;
-				};
-			};
-
-			ssc0: ssc@f8008000 {
-				status = "okay";
-			};
-
-			spi0: spi@f8010000 {
-				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
-				status = "okay";
-				m25p80@0 {
-					compatible = "atmel,at25df321a";
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-				};
-			};
-
-			i2c0: i2c@f8014000 {
-				status = "okay";
-
-				wm8904: codec@1a {
-					compatible = "wlf,wm8904";
-					reg = <0x1a>;
-					clocks = <&pck2>;
-					clock-names = "mclk";
-				};
-
-				qt1070:keyboard@1b {
-					compatible = "qt1070";
-					reg = <0x1b>;
-					interrupt-parent = <&pioE>;
-					interrupts = <25 0x0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_qt1070_irq>;
-					wakeup-source;
-				};
-
-				atmel_mxt_ts@4c {
-					compatible = "atmel,atmel_mxt_ts";
-					reg = <0x4c>;
-					interrupt-parent = <&pioE>;
-					interrupts = <24 0x0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_mxt_ts>;
-				};
-			};
-
-			macb0: ethernet@f8020000 {
-				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
-				phy-mode = "rmii";
-				status = "okay";
-
-				ethernet-phy@1 {
-					reg = <0x1>;
-					interrupt-parent = <&pioE>;
-					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-				};
-			};
-
-			mmc1: mmc@fc000000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioE 6 0>;
-				};
-			};
-
-			usart2: serial@fc008000 {
-				status = "okay";
-			};
-
-			usart3: serial@fc00c000 {
-				status = "okay";
-			};
-
-			usart4: serial@fc010000 {
-				status = "okay";
-			};
-
-			watchdog@fc068640 {
-				status = "okay";
-			};
-
-			pinctrl@fc06a000 {
-				board {
-					pinctrl_macb0_phy_irq: macb0_phy_irq {
-						atmel,pins =
-							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-					pinctrl_mmc0_cd: mmc0_cd {
-						atmel,pins =
-							<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-					pinctrl_mmc1_cd: mmc1_cd {
-						atmel,pins =
-							<AT91_PIOE 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-					pinctrl_pck2_as_audio_mck: pck2_as_audio_mck {
-						atmel,pins =
-							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-					pinctrl_usba_vbus: usba_vbus {
-						atmel,pins =
-							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
-					};
-					pinctrl_key_gpio: key_gpio_0 {
-						atmel,pins =
-							<AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */
-					};
-					pinctrl_qt1070_irq: qt1070_irq {
-						atmel,pins =
-							<AT91_PIOE 25 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-					pinctrl_mxt_ts: mxt_irq {
-						atmel,pins =
-							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-				};
-			};
-		};
-
-		usb0: gadget@00400000 {
-			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usba_vbus>;
-			status = "okay";
-		};
-
-		usb1: ohci@00500000 {
-			num-ports = <3>;
-			atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */
-					   &pioE 11 GPIO_ACTIVE_LOW
-					   &pioE 12 GPIO_ACTIVE_LOW
-					  >;
-			status = "okay";
-		};
-
-		usb2: ehci@00600000 {
-			status = "okay";
-		};
-
-		ebi: ebi@10000000 {
-			pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe
-				     &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy
-				     &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-
-				nand@3 {
-					reg = <0x3 0x0 0x2>;
-					atmel,rb = <0>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "hw";
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						at91bootstrap@0 {
-							label = "at91bootstrap";
-							reg = <0x0 0x40000>;
-						};
-
-						bootloader@40000 {
-							label = "bootloader";
-							reg = <0x40000 0x80000>;
-						};
-
-						bootloaderenv@c0000 {
-							label = "bootloader env";
-							reg = <0xc0000 0xc0000>;
-						};
-
-						dtb@180000 {
-							label = "device tree";
-							reg = <0x180000 0x80000>;
-						};
-
-						kernel@200000 {
-							label = "kernel";
-							reg = <0x200000 0x600000>;
-						};
-
-						rootfs@800000 {
-							label = "rootfs";
-							reg = <0x800000 0x0f800000>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_key_gpio>;
-
-		pb_user1 {
-			label = "pb_user1";
-			gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
-			linux,code = <0x100>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		status = "okay";
-
-		d8 {
-			label = "d8";
-			/* PE28, conflicts with usart4 rts pin */
-			gpios = <&pioE 28 GPIO_ACTIVE_LOW>;
-		};
-
-		d9 {
-			label = "d9";
-			gpios = <&pioE 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		d10 {
-			label = "d10";
-			gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	sound {
-		compatible = "atmel,asoc-wm8904";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pck2_as_audio_mck>;
-
-		atmel,model = "wm8904 @ SAMA5D4EK";
-		atmel,audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"IN1L", "Line In Jack",
-			"IN1R", "Line In Jack";
-
-		atmel,ssc-controller = <&ssc0>;
-		atmel,audio-codec = <&wm8904>;
-	};
-};
diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts
deleted file mode 100644
index 5f29010cdbd8..000000000000
--- a/arch/arm/boot/dts/at91-tse850-3.dts
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- * at91-tse850-3.dts - Device Tree file for the Axentia TSE-850 3.0 board
- *
- * Copyright (C) 2017 Axentia Technologies AB
- *
- * Author: Peter Rosin <peda@axentia.se>
- *
- * Licensed under GPLv2 or later.
- */
-/dts-v1/;
-#include <dt-bindings/pwm/pwm.h>
-#include "at91-linea.dtsi"
-
-/ {
-	model = "Axentia TSE-850 3.0";
-	compatible = "axentia,tse850v3", "axentia,linea",
-		     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
-
-	ahb {
-		apb {
-			pinctrl@fffff200 {
-				tse850 {
-					pinctrl_usba_vbus: usba-vbus {
-						atmel,pins =
-							<AT91_PIOC 31
-							 AT91_PERIPH_GPIO
-							 AT91_PINCTRL_DEGLITCH>;
-					};
-				};
-			};
-
-			watchdog@fffffe40 {
-				status = "okay";
-			};
-		};
-	};
-
-	sck: oscillator {
-		compatible = "fixed-clock";
-
-		#clock-cells = <0>;
-		clock-frequency = <16000000>;
-		clock-output-names = "sck";
-	};
-
-	reg_3v3: regulator {
-		compatible = "regulator-fixed";
-
-		regulator-name = "3v3-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	ana: reg-ana {
-		compatible = "pwm-regulator";
-
-		regulator-name = "ANA";
-
-		pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>;
-		pwm-dutycycle-unit = <1000>;
-		pwm-dutycycle-range = <100 1000>;
-
-		regulator-min-microvolt = <2000000>;
-		regulator-max-microvolt = <20000000>;
-		regulator-ramp-delay = <1000>;
-	};
-
-	sound {
-		compatible = "axentia,tse850-pcm5142";
-
-		axentia,cpu-dai = <&ssc0>;
-		axentia,audio-codec = <&pcm5142>;
-
-		axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>;
-		axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
-		axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>;
-
-		axentia,ana-supply = <&ana>;
-	};
-
-	dac: dpot-dac {
-		compatible = "dpot-dac";
-		vref-supply = <&reg_3v3>;
-		io-channels = <&dpot 0>;
-		io-channel-names = "dpot";
-		#io-channel-cells = <1>;
-	};
-
-	env_det: envelope-detector {
-		compatible = "axentia,tse850-envelope-detector";
-		io-channels = <&dac 0>;
-		io-channel-names = "dac";
-		#io-channel-cells = <1>;
-
-		interrupt-parent = <&pioA>;
-		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
-		interrupt-names = "comp";
-	};
-
-	mux: mux-controller {
-		compatible = "gpio-mux";
-		#mux-control-cells = <0>;
-
-		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
-			    <&pioA 1 GPIO_ACTIVE_HIGH>,
-			    <&pioA 2 GPIO_ACTIVE_HIGH>;
-		idle-state = <0>;
-	};
-
-	envelope-detector-mux {
-		compatible = "io-channel-mux";
-		io-channels = <&env_det 0>;
-		io-channel-names = "parent";
-
-		mux-controls = <&mux>;
-
-		channels = "", "",
-			 "sync-1",
-			 "in",
-			 "out",
-			 "sync-2",
-			 "sys-reg",
-			 "ana-reg";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		ch1-red {
-			label = "ch-1:red";
-			gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
-		};
-		ch1-green {
-			label = "ch-1:green";
-			gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
-		};
-		ch2-red {
-			label = "ch-2:red";
-			gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
-		};
-		ch2-green {
-			label = "ch-2:green";
-			gpios = <&pioA 20 GPIO_ACTIVE_LOW>;
-		};
-		data-red {
-			label = "data:red";
-			gpios = <&pioA 19 GPIO_ACTIVE_LOW>;
-		};
-		data-green {
-			label = "data:green";
-			gpios = <&pioA 18 GPIO_ACTIVE_LOW>;
-		};
-		alarm-red {
-			label = "alarm:red";
-			gpios = <&pioA 17 GPIO_ACTIVE_LOW>;
-		};
-		alarm-green {
-			label = "alarm:green";
-			gpios = <&pioA 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&nand {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		at91bootstrap@0 {
-			label = "at91bootstrap";
-			reg = <0x0 0x40000>;
-		};
-
-		barebox@40000 {
-			label = "bootloader";
-			reg = <0x40000 0x60000>;
-		};
-
-		bareboxenv@c0000 {
-			label = "bareboxenv";
-			reg = <0xc0000 0x40000>;
-		};
-
-		bareboxenv2@100000 {
-			label = "bareboxenv2";
-			reg = <0x100000 0x40000>;
-		};
-
-		oftree@180000 {
-			label = "oftree";
-			reg = <0x180000 0x20000>;
-		};
-
-		kernel@200000 {
-			label = "kernel";
-			reg = <0x200000 0x500000>;
-		};
-
-		rootfs@800000 {
-			label = "rootfs";
-			reg = <0x800000 0x0f800000>;
-		};
-
-		ovlfs@10000000 {
-			label = "ovlfs";
-			reg = <0x10000000 0x10000000>;
-		};
-	};
-};
-
-&ssc0 {
-	#sound-dai-cells = <0>;
-
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	jc42@18 {
-		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
-		reg = <0x18>;
-	};
-
-	dpot: mcp4651-104@28 {
-		compatible = "microchip,mcp4651-104";
-		reg = <0x28>;
-		#io-channel-cells = <1>;
-	};
-
-	pcm5142: pcm5142@4c {
-		compatible = "ti,pcm5142";
-
-		reg = <0x4c>;
-
-		AVDD-supply = <&reg_3v3>;
-		DVDD-supply = <&reg_3v3>;
-		CPVDD-supply = <&reg_3v3>;
-
-		clocks = <&sck>;
-
-		pll-in = <3>;
-		pll-out = <6>;
-	};
-
-	eeprom@50 {
-		compatible = "nxp,24c02", "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-};
-
-&usart0 {
-	status = "okay";
-
-	atmel,use-dma-rx;
-};
-
-&pwm0 {
-	status = "okay";
-
-	pinctrl-0 = <&pinctrl_pwm0_pwml2_1>;
-	pinctrl-names = "default";
-};
-
-&macb1 {
-	status = "okay";
-
-	phy-mode = "rgmii";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	phy0: ethernet-phy@3 {
-		reg = <3>;
-
-		interrupt-parent = <&pioE>;
-		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
-	};
-};
-
-&usb0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usba_vbus>;
-	atmel,vbus-gpio = <&pioC 31 GPIO_ACTIVE_HIGH>;
-};
-
-&usb1 {
-	status = "okay";
-
-	num-ports = <1>;
-	atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
-	atmel,oc-gpio = <&pioC 15 GPIO_ACTIVE_LOW>;
-};
-
-&usb2 {
-	status = "okay";
-};
-
-&dbgu {
-	status = "okay";
-
-	dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
-};
diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts
deleted file mode 100644
index e0c0b2897a49..000000000000
--- a/arch/arm/boot/dts/at91-vinco.dts
+++ /dev/null
@@ -1,256 +0,0 @@
-/*
- * Device Tree file for VInCo platform
- *
- *  Copyright (C) 2014 Atmel,
- *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
- *   2015 Gregory CLEMENT <gregory.clement@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-#include "sama5d4.dtsi"
-
-/ {
-	model = "L+G VInCo platform";
-	compatible = "l+g,vinco", "atmel,sama5d4", "atmel,sama5";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-
-			adc0: adc@fc034000 {
-				status = "okay"; /* Enable ADC IIO support */
-			};
-
-			mmc0: mmc@f8000000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0
-					     &pinctrl_mmc0_dat1_3
-					     &pinctrl_mmc0_dat4_7>;
-				vqmmc-supply = <&vcc_3v3_reg>;
-				vmmc-supply = <&vcc_3v3_reg>;
-				no-1-8-v;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <8>;
-					non-removable;
-					broken-cd;
-					status = "okay";
-				};
-			};
-
-			spi0: spi@f8010000 {
-				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
-				status = "okay";
-				m25p80@0 {
-					compatible = "n25q32b", "jedec,spi-nor";
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-				};
-			};
-
-			i2c0: i2c@f8014000 {
-				status = "okay";
-			};
-
-			i2c1: i2c@f8018000 {
-				status = "okay";
-				/* kerkey security module */
-			};
-
-			macb0: ethernet@f8020000 {
-				phy-mode = "rmii";
-				status = "okay";
-
-				ethernet-phy@1 {
-					reg = <0x1>;
-					reset-gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
-					interrupt-parent = <&pioB>;
-					interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
-				};
-
-			};
-
-			i2c2: i2c@f8024000 {
-				status = "okay";
-
-				rtc1: rtc@64 {
-					compatible = "epson,rx8900";
-					reg = <0x32>;
-				};
-			};
-
-			usart2: serial@fc008000 {
-				/* MBUS */
-				status = "okay";
-			};
-
-			usart3: serial@fc00c000 {
-				/* debug */
-				status = "okay";
-			};
-
-			usart4: serial@fc010000 {
-				/* LMN */
-				pinctrl-0 = <&pinctrl_usart4 &pinctrl_usart4_rts>;
-				linux,rs485-enabled-at-boot-time;
-				status = "okay";
-			};
-
-			macb1: ethernet@fc028000 {
-				phy-mode = "rmii";
-				status = "okay";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "okay";
-
-				ethernet-phy@1 {
-					reg = <0x1>;
-					interrupt-parent = <&pioB>;
-					interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
-					reset-gpios = <&pioE 6 GPIO_ACTIVE_LOW>;
-				};
-			};
-
-			watchdog@fc068640 {
-				status = "okay";
-			};
-
-			pinctrl@fc06a000 {
-				board {
-					pinctrl_usba_vbus: usba_vbus {
-						atmel,pins =
-						<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
-					};
-				};
-			};
-		};
-
-		usb0: gadget@00400000 {
-			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usba_vbus>;
-			status = "disable";
-		};
-
-		usb1: ohci@00500000 {
-			num-ports = <3>;
-			atmel,vbus-gpio = <0
-					   &pioE 11 GPIO_ACTIVE_LOW
-					   &pioE 12 GPIO_ACTIVE_LOW
-					  >;
-			status = "disable";
-		};
-
-		usb2: ehci@00600000 {
-			/* 4G Modem */
-			status = "okay";
-		};
-
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		status = "okay";
-
-		led_err {
-			label = "err";
-			gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_rssi {
-			label = "rssi";
-			gpios = <&pioA 9 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_tls {
-			label = "tls";
-			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_lmc {
-			label = "lmc";
-			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_wmt {
-			label = "wmt";
-			gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led_pwr {
-			label = "pwr";
-			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-	};
-
-	vcc_3v3_reg: fixedregulator_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC 3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
deleted file mode 100644
index f057e0b15a6f..000000000000
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ /dev/null
@@ -1,965 +0,0 @@
-/*
- * at91rm9200.dtsi - Device Tree Include file for AT91RM9200 family SoC
- *
- *  Copyright (C) 2011 Atmel,
- *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
- *                2012 Joachim Eastwood <manabian@gmail.com>
- *
- * Based on at91sam9260.dtsi
- *
- * Licensed under GPLv2 or later.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/at91.h>
-
-/ {
-	model = "Atmel AT91RM9200 family SoC";
-	compatible = "atmel,at91rm9200";
-	interrupt-parent = <&aic>;
-
-	aliases {
-		serial0 = &dbgu;
-		serial1 = &usart0;
-		serial2 = &usart1;
-		serial3 = &usart2;
-		serial4 = &usart3;
-		gpio0 = &pioA;
-		gpio1 = &pioB;
-		gpio2 = &pioC;
-		gpio3 = &pioD;
-		tcb0 = &tcb0;
-		tcb1 = &tcb1;
-		i2c0 = &i2c0;
-		ssc0 = &ssc0;
-		ssc1 = &ssc1;
-		ssc2 = &ssc2;
-	};
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm920t";
-			device_type = "cpu";
-		};
-	};
-
-	memory {
-		reg = <0x20000000 0x04000000>;
-	};
-
-	clocks {
-		slow_xtal: slow_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		main_xtal: main_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	sram: sram@00200000 {
-		compatible = "mmio-sram";
-		reg = <0x00200000 0x4000>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <3>;
-				compatible = "atmel,at91rm9200-aic";
-				interrupt-controller;
-				reg = <0xfffff000 0x200>;
-				atmel,external-irqs = <25 26 27 28 29 30 31>;
-			};
-
-			ramc0: ramc@ffffff00 {
-				compatible = "atmel,at91rm9200-sdramc", "syscon";
-				reg = <0xffffff00 0x100>;
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc", "syscon";
-				reg = <0xfffffc00 0x100>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-
-				main_osc: main_osc {
-					compatible = "atmel,at91rm9200-clk-main-osc";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
-					clocks = <&main_xtal>;
-				};
-
-				main: mainck {
-					compatible = "atmel,at91rm9200-clk-main";
-					#clock-cells = <0>;
-					clocks = <&main_osc>;
-				};
-
-				plla: pllack {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
-					clocks = <&main>;
-					reg = <0>;
-					atmel,clk-input-range = <1000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <3>;
-					atmel,pll-clk-output-ranges = <80000000 160000000 0>,
-								<150000000 180000000 2>;
-				};
-
-				pllb: pllbck {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKB>;
-					clocks = <&main>;
-					reg = <1>;
-					atmel,clk-input-range = <1000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <3>;
-					atmel,pll-clk-output-ranges = <80000000 160000000 0>,
-								<150000000 180000000 2>;
-				};
-
-				mck: masterck {
-					compatible = "atmel,at91rm9200-clk-master";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
-					clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
-					atmel,clk-output-range = <0 80000000>;
-					atmel,clk-divisors = <1 2 3 4>;
-				};
-
-				usb: usbck {
-					compatible = "atmel,at91rm9200-clk-usb";
-					#clock-cells = <0>;
-					atmel,clk-divisors = <1 2 0 0>;
-					clocks = <&pllb>;
-				};
-
-				prog: progck {
-					compatible = "atmel,at91rm9200-clk-programmable";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					interrupt-parent = <&pmc>;
-					clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
-
-					prog0: prog0 {
-						#clock-cells = <0>;
-						reg = <0>;
-						interrupts = <AT91_PMC_PCKRDY(0)>;
-					};
-
-					prog1: prog1 {
-						#clock-cells = <0>;
-						reg = <1>;
-						interrupts = <AT91_PMC_PCKRDY(1)>;
-					};
-
-					prog2: prog2 {
-						#clock-cells = <0>;
-						reg = <2>;
-						interrupts = <AT91_PMC_PCKRDY(2)>;
-					};
-
-					prog3: prog3 {
-						#clock-cells = <0>;
-						reg = <3>;
-						interrupts = <AT91_PMC_PCKRDY(3)>;
-					};
-				};
-
-				systemck {
-					compatible = "atmel,at91rm9200-clk-system";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					udpck: udpck {
-						#clock-cells = <0>;
-						reg = <2>;
-						clocks = <&usb>;
-					};
-
-					uhpck: uhpck {
-						#clock-cells = <0>;
-						reg = <4>;
-						clocks = <&usb>;
-					};
-
-					pck0: pck0 {
-						#clock-cells = <0>;
-						reg = <8>;
-						clocks = <&prog0>;
-					};
-
-					pck1: pck1 {
-						#clock-cells = <0>;
-						reg = <9>;
-						clocks = <&prog1>;
-					};
-
-					pck2: pck2 {
-						#clock-cells = <0>;
-						reg = <10>;
-						clocks = <&prog2>;
-					};
-
-					pck3: pck3 {
-						#clock-cells = <0>;
-						reg = <11>;
-						clocks = <&prog3>;
-					};
-				};
-
-				periphck {
-					compatible = "atmel,at91rm9200-clk-peripheral";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&mck>;
-
-					pioA_clk: pioA_clk {
-						#clock-cells = <0>;
-						reg = <2>;
-					};
-
-					pioB_clk: pioB_clk {
-						#clock-cells = <0>;
-						reg = <3>;
-					};
-
-					pioC_clk: pioC_clk {
-						#clock-cells = <0>;
-						reg = <4>;
-					};
-
-					pioD_clk: pioD_clk {
-						#clock-cells = <0>;
-						reg = <5>;
-					};
-
-					usart0_clk: usart0_clk {
-						#clock-cells = <0>;
-						reg = <6>;
-					};
-
-					usart1_clk: usart1_clk {
-						#clock-cells = <0>;
-						reg = <7>;
-					};
-
-					usart2_clk: usart2_clk {
-						#clock-cells = <0>;
-						reg = <8>;
-					};
-
-					usart3_clk: usart3_clk {
-						#clock-cells = <0>;
-						reg = <9>;
-					};
-
-					mci0_clk: mci0_clk {
-						#clock-cells = <0>;
-						reg = <10>;
-					};
-
-					udc_clk: udc_clk {
-						#clock-cells = <0>;
-						reg = <11>;
-					};
-
-					twi0_clk: twi0_clk {
-						reg = <12>;
-						#clock-cells = <0>;
-					};
-
-					spi0_clk: spi0_clk {
-						#clock-cells = <0>;
-						reg = <13>;
-					};
-
-					ssc0_clk: ssc0_clk {
-						#clock-cells = <0>;
-						reg = <14>;
-					};
-
-					ssc1_clk: ssc1_clk {
-						#clock-cells = <0>;
-						reg = <15>;
-					};
-
-					ssc2_clk: ssc2_clk {
-						#clock-cells = <0>;
-						reg = <16>;
-					};
-
-					tc0_clk: tc0_clk {
-						#clock-cells = <0>;
-						reg = <17>;
-					};
-
-					tc1_clk: tc1_clk {
-						#clock-cells = <0>;
-						reg = <18>;
-					};
-
-					tc2_clk: tc2_clk {
-						#clock-cells = <0>;
-						reg = <19>;
-					};
-
-					tc3_clk: tc3_clk {
-						#clock-cells = <0>;
-						reg = <20>;
-					};
-
-					tc4_clk: tc4_clk {
-						#clock-cells = <0>;
-						reg = <21>;
-					};
-
-					tc5_clk: tc5_clk {
-						#clock-cells = <0>;
-						reg = <22>;
-					};
-
-					ohci_clk: ohci_clk {
-						#clock-cells = <0>;
-						reg = <23>;
-					};
-
-					macb0_clk: macb0_clk {
-						#clock-cells = <0>;
-						reg = <24>;
-					};
-				};
-			};
-
-			st: timer@fffffd00 {
-				compatible = "atmel,at91rm9200-st", "syscon", "simple-mfd";
-				reg = <0xfffffd00 0x100>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&slow_xtal>;
-
-				watchdog {
-					compatible = "atmel,at91rm9200-wdt";
-				};
-			};
-
-			rtc: rtc@fffffe00 {
-				compatible = "atmel,at91rm9200-rtc";
-				reg = <0xfffffe00 0x40>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&slow_xtal>;
-				status = "disabled";
-			};
-
-			tcb0: timer@fffa0000 {
-				compatible = "atmel,at91rm9200-tcb";
-				reg = <0xfffa0000 0x100>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
-					      18 IRQ_TYPE_LEVEL_HIGH 0
-					      19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&slow_xtal>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
-			};
-
-			tcb1: timer@fffa4000 {
-				compatible = "atmel,at91rm9200-tcb";
-				reg = <0xfffa4000 0x100>;
-				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0
-					      21 IRQ_TYPE_LEVEL_HIGH 0
-					      22 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>, <&slow_xtal>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
-			};
-
-			i2c0: i2c@fffb8000 {
-				compatible = "atmel,at91rm9200-i2c";
-				reg = <0xfffb8000 0x4000>;
-				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_twi>;
-				clocks = <&twi0_clk>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			mmc0: mmc@fffb4000 {
-				compatible = "atmel,hsmci";
-				reg = <0xfffb4000 0x4000>;
-				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&mci0_clk>;
-				clock-names = "mci_clk";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			ssc0: ssc@fffd0000 {
-				compatible = "atmel,at91rm9200-ssc";
-				reg = <0xfffd0000 0x4000>;
-				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&ssc0_clk>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			ssc1: ssc@fffd4000 {
-				compatible = "atmel,at91rm9200-ssc";
-				reg = <0xfffd4000 0x4000>;
-				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
-				clocks = <&ssc1_clk>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			ssc2: ssc@fffd8000 {
-				compatible = "atmel,at91rm9200-ssc";
-				reg = <0xfffd8000 0x4000>;
-				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
-				clocks = <&ssc2_clk>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			macb0: ethernet@fffbc000 {
-				compatible = "cdns,at91rm9200-emac", "cdns,emac";
-				reg = <0xfffbc000 0x4000>;
-				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
-				phy-mode = "rmii";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb_rmii>;
-				clocks = <&macb0_clk>;
-				clock-names = "ether_clk";
-				status = "disabled";
-			};
-
-			pinctrl@fffff400 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
-				ranges = <0xfffff400 0xfffff400 0x800>;
-
-				atmel,mux-mask = <
-					/*    A         B     */
-					 0xffffffff 0xffffffff  /* pioA */
-					 0xffffffff 0x083fffff  /* pioB */
-					 0xffff3fff 0x00000000  /* pioC */
-					 0x03ff87ff 0x0fffff80  /* pioD */
-					>;
-
-				/* shared pinctrl settings */
-				dbgu {
-					pinctrl_dbgu: dbgu-0 {
-						atmel,pins =
-							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				uart0 {
-					pinctrl_uart0: uart0-0 {
-						atmel,pins =
-							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
-							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA18 periph A */
-					};
-
-					pinctrl_uart0_cts: uart0_cts-0 {
-						atmel,pins =
-							<AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA20 periph A */
-					};
-
-					pinctrl_uart0_rts: uart0_rts-0 {
-						atmel,pins =
-							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA21 periph A */
-					};
-				};
-
-				uart1 {
-					pinctrl_uart1: uart1-0 {
-						atmel,pins =
-							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB20 periph A with pullup */
-							 AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB21 periph A */
-					};
-
-					pinctrl_uart1_rts: uart1_rts-0 {
-						atmel,pins =
-							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB24 periph A */
-					};
-
-					pinctrl_uart1_cts: uart1_cts-0 {
-						atmel,pins =
-							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB26 periph A */
-					};
-
-					pinctrl_uart1_dtr_dsr: uart1_dtr_dsr-0 {
-						atmel,pins =
-							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB19 periph A */
-							 AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB25 periph A */
-					};
-
-					pinctrl_uart1_dcd: uart1_dcd-0 {
-						atmel,pins =
-							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB23 periph A */
-					};
-
-					pinctrl_uart1_ri: uart1_ri-0 {
-						atmel,pins =
-							<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A */
-					};
-				};
-
-				uart2 {
-					pinctrl_uart2: uart2-0 {
-						atmel,pins =
-							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA22 periph A */
-							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA23 periph A with pullup */
-					};
-
-					pinctrl_uart2_rts: uart2_rts-0 {
-						atmel,pins =
-							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA30 periph B */
-					};
-
-					pinctrl_uart2_cts: uart2_cts-0 {
-						atmel,pins =
-							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA31 periph B */
-					};
-				};
-
-				uart3 {
-					pinctrl_uart3: uart3-0 {
-						atmel,pins =
-							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA5 periph B with pullup */
-							 AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA6 periph B */
-					};
-
-					pinctrl_uart3_rts: uart3_rts-0 {
-						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
-					};
-
-					pinctrl_uart3_cts: uart3_cts-0 {
-						atmel,pins =
-							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
-					};
-				};
-
-				nand {
-					pinctrl_nand: nand-0 {
-						atmel,pins =
-							<AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP	/* PC2 gpio RDY pin pull_up */
-							 AT91_PIOB 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PB1 gpio CD pin pull_up */
-					};
-				};
-
-				macb {
-					pinctrl_macb_rmii: macb_rmii-0 {
-						atmel,pins =
-							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA7 periph A */
-							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA8 periph A */
-							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA9 periph A */
-							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA10 periph A */
-							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A */
-							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A */
-							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A */
-							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A */
-							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A */
-							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA16 periph A */
-					};
-
-					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
-						atmel,pins =
-							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB12 periph B */
-							 AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB13 periph B */
-							 AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB14 periph B */
-							 AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB15 periph B */
-							 AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB16 periph B */
-							 AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB17 periph B */
-							 AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB18 periph B */
-							 AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB19 periph B */
-					};
-				};
-
-				mmc0 {
-					pinctrl_mmc0_clk: mmc0_clk-0 {
-						atmel,pins =
-							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA27 periph A */
-					};
-
-					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA28 periph A with pullup */
-							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA29 periph A with pullup */
-					};
-
-					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PB3 periph B with pullup */
-							 AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PB4 periph B with pullup */
-							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PB5 periph B with pullup */
-					};
-
-					pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA8 periph B with pullup */
-							 AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA9 periph B with pullup */
-					};
-
-					pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA10 periph B with pullup */
-							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA11 periph B with pullup */
-							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA12 periph B with pullup */
-					};
-				};
-
-				ssc0 {
-					pinctrl_ssc0_tx: ssc0_tx-0 {
-						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
-							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
-							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB2 periph A */
-					};
-
-					pinctrl_ssc0_rx: ssc0_rx-0 {
-						atmel,pins =
-							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
-							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
-							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB5 periph A */
-					};
-				};
-
-				ssc1 {
-					pinctrl_ssc1_tx: ssc1_tx-0 {
-						atmel,pins =
-							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
-							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
-							 AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB8 periph A */
-					};
-
-					pinctrl_ssc1_rx: ssc1_rx-0 {
-						atmel,pins =
-							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
-							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB10 periph A */
-							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB11 periph A */
-					};
-				};
-
-				ssc2 {
-					pinctrl_ssc2_tx: ssc2_tx-0 {
-						atmel,pins =
-							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A */
-							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A */
-							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB14 periph A */
-					};
-
-					pinctrl_ssc2_rx: ssc2_rx-0 {
-						atmel,pins =
-							<AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A */
-							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
-							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB17 periph A */
-					};
-				};
-
-				twi {
-					pinctrl_twi: twi-0 {
-						atmel,pins =
-							<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE	/* PA25 periph A with multi drive */
-							 AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>;	/* PA26 periph A with multi drive */
-					};
-
-					pinctrl_twi_gpio: twi_gpio-0 {
-						atmel,pins =
-							<AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PA25 GPIO with multi drive */
-							 AT91_PIOA 26 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PA26 GPIO with multi drive */
-					};
-				};
-
-				tcb0 {
-					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
-						atmel,pins = <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
-						atmel,pins = <AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
-						atmel,pins = <AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
-						atmel,pins = <AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
-						atmel,pins = <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
-						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
-						atmel,pins = <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
-						atmel,pins = <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
-						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				tcb1 {
-					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
-						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
-						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
-						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
-						atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
-						atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
-						atmel,pins = <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
-						atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
-						atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
-						atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				spi0 {
-					pinctrl_spi0: spi0-0 {
-						atmel,pins =
-							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A SPI0_MISO pin */
-							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA1 periph A SPI0_MOSI pin */
-							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A SPI0_SPCK pin */
-					};
-				};
-
-				pioA: gpio@fffff400 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff400 0x200>;
-					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioA_clk>;
-				};
-
-				pioB: gpio@fffff600 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff600 0x200>;
-					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioB_clk>;
-				};
-
-				pioC: gpio@fffff800 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff800 0x200>;
-					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioC_clk>;
-				};
-
-				pioD: gpio@fffffa00 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffffa00 0x200>;
-					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioD_clk>;
-				};
-			};
-
-			dbgu: serial@fffff200 {
-				compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart";
-				reg = <0xfffff200 0x200>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&mck>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart0: serial@fffc0000 {
-				compatible = "atmel,at91rm9200-usart";
-				reg = <0xfffc0000 0x200>;
-				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart0>;
-				clocks = <&usart0_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart1: serial@fffc4000 {
-				compatible = "atmel,at91rm9200-usart";
-				reg = <0xfffc4000 0x200>;
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart1>;
-				clocks = <&usart1_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart2: serial@fffc8000 {
-				compatible = "atmel,at91rm9200-usart";
-				reg = <0xfffc8000 0x200>;
-				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart2>;
-				clocks = <&usart2_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart3: serial@fffcc000 {
-				compatible = "atmel,at91rm9200-usart";
-				reg = <0xfffcc000 0x200>;
-				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart3>;
-				clocks = <&usart3_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usb1: gadget@fffb0000 {
-				compatible = "atmel,at91rm9200-udc";
-				reg = <0xfffb0000 0x4000>;
-				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&udc_clk>, <&udpck>;
-				clock-names = "pclk", "hclk";
-				status = "disabled";
-			};
-
-			spi0: spi@fffe0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xfffe0000 0x200>;
-				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&spi0_clk>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-		};
-
-		nand0: nand@40000000 {
-			compatible = "atmel,at91rm9200-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x40000000 0x10000000>;
-			atmel,nand-addr-offset = <21>;
-			atmel,nand-cmd-offset = <22>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_nand>;
-			nand-ecc-mode = "soft";
-			gpios = <&pioC 2 GPIO_ACTIVE_HIGH
-				 0
-				 &pioB 1 GPIO_ACTIVE_HIGH
-				>;
-			status = "disabled";
-		};
-
-		usb0: ohci@00300000 {
-			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
-			reg = <0x00300000 0x100000>;
-			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>;
-			clock-names = "ohci_clk", "hclk", "uhpck";
-			status = "disabled";
-		};
-	};
-
-	i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 26 GPIO_ACTIVE_HIGH /* scl */
-			>;
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_twi_gpio>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
deleted file mode 100644
index 6582f3cca929..000000000000
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ /dev/null
@@ -1,1053 +0,0 @@
-/*
- * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
- *
- *  Copyright (C) 2011 Atmel,
- *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
- *                2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/at91.h>
-
-/ {
-	model = "Atmel AT91SAM9260 family SoC";
-	compatible = "atmel,at91sam9260";
-	interrupt-parent = <&aic>;
-
-	aliases {
-		serial0 = &dbgu;
-		serial1 = &usart0;
-		serial2 = &usart1;
-		serial3 = &usart2;
-		serial4 = &usart3;
-		serial5 = &uart0;
-		serial6 = &uart1;
-		gpio0 = &pioA;
-		gpio1 = &pioB;
-		gpio2 = &pioC;
-		tcb0 = &tcb0;
-		tcb1 = &tcb1;
-		i2c0 = &i2c0;
-		ssc0 = &ssc0;
-	};
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-		};
-	};
-
-	memory {
-		reg = <0x20000000 0x04000000>;
-	};
-
-	clocks {
-		slow_xtal: slow_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		main_xtal: main_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		adc_op_clk: adc_op_clk{
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <5000000>;
-		};
-	};
-
-	sram0: sram@002ff000 {
-		compatible = "mmio-sram";
-		reg = <0x002ff000 0x2000>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <3>;
-				compatible = "atmel,at91rm9200-aic";
-				interrupt-controller;
-				reg = <0xfffff000 0x200>;
-				atmel,external-irqs = <29 30 31>;
-			};
-
-			ramc0: ramc@ffffea00 {
-				compatible = "atmel,at91sam9260-sdramc";
-				reg = <0xffffea00 0x200>;
-			};
-
-			smc: smc@ffffec00 {
-				compatible = "atmel,at91sam9260-smc", "syscon";
-				reg = <0xffffec00 0x200>;
-			};
-
-			matrix: matrix@ffffee00 {
-				compatible = "atmel,at91sam9260-matrix", "syscon";
-				reg = <0xffffee00 0x200>;
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9260-pmc", "syscon";
-				reg = <0xfffffc00 0x100>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-
-				main_osc: main_osc {
-					compatible = "atmel,at91rm9200-clk-main-osc";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
-					clocks = <&main_xtal>;
-				};
-
-				main: mainck {
-					compatible = "atmel,at91rm9200-clk-main";
-					#clock-cells = <0>;
-					clocks = <&main_osc>;
-				};
-
-				slow_rc_osc: slow_rc_osc {
-					compatible = "fixed-clock";
-					#clock-cells = <0>;
-					clock-frequency = <32768>;
-					clock-accuracy = <50000000>;
-				};
-
-				clk32k: slck {
-					compatible = "atmel,at91sam9260-clk-slow";
-					#clock-cells = <0>;
-					clocks = <&slow_rc_osc>, <&slow_xtal>;
-				};
-
-				plla: pllack {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
-					clocks = <&main>;
-					reg = <0>;
-					atmel,clk-input-range = <1000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <80000000 160000000 0 1>,
-								<150000000 240000000 2 1>;
-				};
-
-				pllb: pllbck {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKB>;
-					clocks = <&main>;
-					reg = <1>;
-					atmel,clk-input-range = <1000000 5000000>;
-					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
-				};
-
-				mck: masterck {
-					compatible = "atmel,at91rm9200-clk-master";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
-					clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
-					atmel,clk-output-range = <0 105000000>;
-					atmel,clk-divisors = <1 2 4 0>;
-				};
-
-				usb: usbck {
-					compatible = "atmel,at91rm9200-clk-usb";
-					#clock-cells = <0>;
-					atmel,clk-divisors = <1 2 4 0>;
-					clocks = <&pllb>;
-				};
-
-				prog: progck {
-					compatible = "atmel,at91rm9200-clk-programmable";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					interrupt-parent = <&pmc>;
-					clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
-
-					prog0: prog0 {
-						#clock-cells = <0>;
-						reg = <0>;
-						interrupts = <AT91_PMC_PCKRDY(0)>;
-					};
-
-					prog1: prog1 {
-						#clock-cells = <0>;
-						reg = <1>;
-						interrupts = <AT91_PMC_PCKRDY(1)>;
-					};
-				};
-
-				systemck {
-					compatible = "atmel,at91rm9200-clk-system";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					uhpck: uhpck {
-						#clock-cells = <0>;
-						reg = <6>;
-						clocks = <&usb>;
-					};
-
-					udpck: udpck {
-						#clock-cells = <0>;
-						reg = <7>;
-						clocks = <&usb>;
-					};
-
-					pck0: pck0 {
-						#clock-cells = <0>;
-						reg = <8>;
-						clocks = <&prog0>;
-					};
-
-					pck1: pck1 {
-						#clock-cells = <0>;
-						reg = <9>;
-						clocks = <&prog1>;
-					};
-				};
-
-				periphck {
-					compatible = "atmel,at91rm9200-clk-peripheral";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&mck>;
-
-					pioA_clk: pioA_clk {
-						#clock-cells = <0>;
-						reg = <2>;
-					};
-
-					pioB_clk: pioB_clk {
-						#clock-cells = <0>;
-						reg = <3>;
-					};
-
-					pioC_clk: pioC_clk {
-						#clock-cells = <0>;
-						reg = <4>;
-					};
-
-					adc_clk: adc_clk {
-						#clock-cells = <0>;
-						reg = <5>;
-					};
-
-					usart0_clk: usart0_clk {
-						#clock-cells = <0>;
-						reg = <6>;
-					};
-
-					usart1_clk: usart1_clk {
-						#clock-cells = <0>;
-						reg = <7>;
-					};
-
-					usart2_clk: usart2_clk {
-						#clock-cells = <0>;
-						reg = <8>;
-					};
-
-					mci0_clk: mci0_clk {
-						#clock-cells = <0>;
-						reg = <9>;
-					};
-
-					udc_clk: udc_clk {
-						#clock-cells = <0>;
-						reg = <10>;
-					};
-
-					twi0_clk: twi0_clk {
-						reg = <11>;
-						#clock-cells = <0>;
-					};
-
-					spi0_clk: spi0_clk {
-						#clock-cells = <0>;
-						reg = <12>;
-					};
-
-					spi1_clk: spi1_clk {
-						#clock-cells = <0>;
-						reg = <13>;
-					};
-
-					ssc0_clk: ssc0_clk {
-						#clock-cells = <0>;
-						reg = <14>;
-					};
-
-					tc0_clk: tc0_clk {
-						#clock-cells = <0>;
-						reg = <17>;
-					};
-
-					tc1_clk: tc1_clk {
-						#clock-cells = <0>;
-						reg = <18>;
-					};
-
-					tc2_clk: tc2_clk {
-						#clock-cells = <0>;
-						reg = <19>;
-					};
-
-					ohci_clk: ohci_clk {
-						#clock-cells = <0>;
-						reg = <20>;
-					};
-
-					macb0_clk: macb0_clk {
-						#clock-cells = <0>;
-						reg = <21>;
-					};
-
-					isi_clk: isi_clk {
-						#clock-cells = <0>;
-						reg = <22>;
-					};
-
-					usart3_clk: usart3_clk {
-						#clock-cells = <0>;
-						reg = <23>;
-					};
-
-					uart0_clk: uart0_clk {
-						#clock-cells = <0>;
-						reg = <24>;
-					};
-
-					uart1_clk: uart1_clk {
-						#clock-cells = <0>;
-						reg = <25>;
-					};
-
-					tc3_clk: tc3_clk {
-						#clock-cells = <0>;
-						reg = <26>;
-					};
-
-					tc4_clk: tc4_clk {
-						#clock-cells = <0>;
-						reg = <27>;
-					};
-
-					tc5_clk: tc5_clk {
-						#clock-cells = <0>;
-						reg = <28>;
-					};
-				};
-			};
-
-			rstc@fffffd00 {
-				compatible = "atmel,at91sam9260-rstc";
-				reg = <0xfffffd00 0x10>;
-				clocks = <&clk32k>;
-			};
-
-			shdwc@fffffd10 {
-				compatible = "atmel,at91sam9260-shdwc";
-				reg = <0xfffffd10 0x10>;
-				clocks = <&clk32k>;
-			};
-
-			pit: timer@fffffd30 {
-				compatible = "atmel,at91sam9260-pit";
-				reg = <0xfffffd30 0xf>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&mck>;
-			};
-
-			tcb0: timer@fffa0000 {
-				compatible = "atmel,at91rm9200-tcb";
-				reg = <0xfffa0000 0x100>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
-					      18 IRQ_TYPE_LEVEL_HIGH 0
-					      19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&clk32k>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
-			};
-
-			tcb1: timer@fffdc000 {
-				compatible = "atmel,at91rm9200-tcb";
-				reg = <0xfffdc000 0x100>;
-				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0
-					      27 IRQ_TYPE_LEVEL_HIGH 0
-					      28 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>, <&clk32k>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
-			};
-
-			pinctrl@fffff400 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
-				ranges = <0xfffff400 0xfffff400 0x600>;
-
-				atmel,mux-mask = <
-				      /*    A         B     */
-				       0xffffffff 0xffc00c3b  /* pioA */
-				       0xffffffff 0x7fff3ccf  /* pioB */
-				       0xffffffff 0x007fffff  /* pioC */
-				      >;
-
-				/* shared pinctrl settings */
-				dbgu {
-					pinctrl_dbgu: dbgu-0 {
-						atmel,pins =
-							<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				usart0 {
-					pinctrl_usart0: usart0-0 {
-						atmel,pins =
-							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
-							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB5 periph A */
-					};
-
-					pinctrl_usart0_rts: usart0_rts-0 {
-						atmel,pins =
-							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB26 periph A */
-					};
-
-					pinctrl_usart0_cts: usart0_cts-0 {
-						atmel,pins =
-							<AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB27 periph A */
-					};
-
-					pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
-						atmel,pins =
-							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB24 periph A */
-							 AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB22 periph A */
-					};
-
-					pinctrl_usart0_dcd: usart0_dcd-0 {
-						atmel,pins =
-							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB23 periph A */
-					};
-
-					pinctrl_usart0_ri: usart0_ri-0 {
-						atmel,pins =
-							<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB25 periph A */
-					};
-				};
-
-				usart1 {
-					pinctrl_usart1: usart1-0 {
-						atmel,pins =
-							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB6 periph A with pullup */
-							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB7 periph A */
-					};
-
-					pinctrl_usart1_rts: usart1_rts-0 {
-						atmel,pins =
-							<AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB28 periph A */
-					};
-
-					pinctrl_usart1_cts: usart1_cts-0 {
-						atmel,pins =
-							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB29 periph A */
-					};
-				};
-
-				usart2 {
-					pinctrl_usart2: usart2-0 {
-						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB8 periph A with pullup */
-							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB9 periph A */
-					};
-
-					pinctrl_usart2_rts: usart2_rts-0 {
-						atmel,pins =
-							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA4 periph A */
-					};
-
-					pinctrl_usart2_cts: usart2_cts-0 {
-						atmel,pins =
-							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA5 periph A */
-					};
-				};
-
-				usart3 {
-					pinctrl_usart3: usart3-0 {
-						atmel,pins =
-							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB10 periph A with pullup */
-							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB11 periph A */
-					};
-
-					pinctrl_usart3_rts: usart3_rts-0 {
-						atmel,pins =
-							<AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart3_cts: usart3_cts-0 {
-						atmel,pins =
-							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				uart0 {
-					pinctrl_uart0: uart0-0 {
-						atmel,pins =
-							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA31 periph B with pullup */
-							 AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA30 periph B */
-					};
-				};
-
-				uart1 {
-					pinctrl_uart1: uart1-0 {
-						atmel,pins =
-							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB12 periph A with pullup */
-							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB13 periph A */
-					};
-				};
-
-				nand {
-					pinctrl_nand_rb: nand-rb-0 {
-						atmel,pins =
-							<AT91_PIOC 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_nand_cs: nand-cs-0 {
-						atmel,pins =
-							 <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-				};
-
-				macb {
-					pinctrl_macb_rmii: macb_rmii-0 {
-						atmel,pins =
-							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A */
-							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A */
-							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A */
-							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A */
-							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA16 periph A */
-							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
-							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA18 periph A */
-							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA19 periph A */
-							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA20 periph A */
-							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA21 periph A */
-					};
-
-					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
-						atmel,pins =
-							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B */
-							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA23 periph B */
-							 AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
-							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
-							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA26 periph B */
-							 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
-							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
-							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
-					};
-
-					pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 {
-						atmel,pins =
-							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA10 periph B */
-							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA11 periph B */
-							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B */
-							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
-							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA26 periph B */
-							 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
-							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
-							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
-					};
-				};
-
-				mmc0 {
-					pinctrl_mmc0_clk: mmc0_clk-0 {
-						atmel,pins =
-							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA8 periph A */
-					};
-
-					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
-							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA6 periph A with pullup */
-					};
-
-					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA9 periph A with pullup */
-							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA10 periph A with pullup */
-							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA11 periph A with pullup */
-					};
-
-					pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA1 periph B with pullup */
-							 AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA0 periph B with pullup */
-					};
-
-					pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA5 periph B with pullup */
-							 AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA4 periph B with pullup */
-							 AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA3 periph B with pullup */
-					};
-				};
-
-				ssc0 {
-					pinctrl_ssc0_tx: ssc0_tx-0 {
-						atmel,pins =
-							<AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
-							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A */
-							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A */
-					};
-
-					pinctrl_ssc0_rx: ssc0_rx-0 {
-						atmel,pins =
-							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB19 periph A */
-							 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB20 periph A */
-							 AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB21 periph A */
-					};
-				};
-
-				spi0 {
-					pinctrl_spi0: spi0-0 {
-						atmel,pins =
-							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A SPI0_MISO pin */
-							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA1 periph A SPI0_MOSI pin */
-							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A SPI0_SPCK pin */
-					};
-				};
-
-				spi1 {
-					pinctrl_spi1: spi1-0 {
-						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A SPI1_MISO pin */
-							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A SPI1_MOSI pin */
-							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB2 periph A SPI1_SPCK pin */
-					};
-				};
-
-				i2c_gpio0 {
-					pinctrl_i2c_gpio0: i2c_gpio0-0 {
-						atmel,pins =
-							<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE
-							 AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
-					};
-				};
-
-				tcb0 {
-					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
-						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
-						atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
-						atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
-						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
-						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
-						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
-						atmel,pins = <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
-						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
-						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				tcb1 {
-					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
-						atmel,pins = <AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
-						atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
-						atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
-						atmel,pins = <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
-						atmel,pins = <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
-						atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
-						atmel,pins = <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
-						atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
-						atmel,pins = <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				pioA: gpio@fffff400 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff400 0x200>;
-					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioA_clk>;
-				};
-
-				pioB: gpio@fffff600 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff600 0x200>;
-					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioB_clk>;
-				};
-
-				pioC: gpio@fffff800 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff800 0x200>;
-					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioC_clk>;
-				};
-			};
-
-			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
-				reg = <0xfffff200 0x200>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&mck>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart0: serial@fffb0000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb0000 0x200>;
-				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart0>;
-				clocks = <&usart0_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart1: serial@fffb4000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb4000 0x200>;
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart1>;
-				clocks = <&usart1_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart2: serial@fffb8000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb8000 0x200>;
-				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart2>;
-				clocks = <&usart2_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart3: serial@fffd0000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffd0000 0x200>;
-				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart3>;
-				clocks = <&usart3_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			uart0: serial@fffd4000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffd4000 0x200>;
-				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart0>;
-				clocks = <&uart0_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			uart1: serial@fffd8000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffd8000 0x200>;
-				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart1>;
-				clocks = <&uart1_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			macb0: ethernet@fffc4000 {
-				compatible = "cdns,at91sam9260-macb", "cdns,macb";
-				reg = <0xfffc4000 0x100>;
-				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb_rmii>;
-				clocks = <&macb0_clk>, <&macb0_clk>;
-				clock-names = "hclk", "pclk";
-				status = "disabled";
-			};
-
-			usb1: gadget@fffa4000 {
-				compatible = "atmel,at91sam9260-udc";
-				reg = <0xfffa4000 0x4000>;
-				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&udc_clk>, <&udpck>;
-				clock-names = "pclk", "hclk";
-				status = "disabled";
-			};
-
-			i2c0: i2c@fffac000 {
-				compatible = "atmel,at91sam9260-i2c";
-				reg = <0xfffac000 0x100>;
-				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&twi0_clk>;
-				status = "disabled";
-			};
-
-			mmc0: mmc@fffa8000 {
-				compatible = "atmel,hsmci";
-				reg = <0xfffa8000 0x600>;
-				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pinctrl-names = "default";
-				clocks = <&mci0_clk>;
-				clock-names = "mci_clk";
-				status = "disabled";
-			};
-
-			ssc0: ssc@fffbc000 {
-				compatible = "atmel,at91rm9200-ssc";
-				reg = <0xfffbc000 0x4000>;
-				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&ssc0_clk>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			spi0: spi@fffc8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xfffc8000 0x200>;
-				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&spi0_clk>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-
-			spi1: spi@fffcc000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xfffcc000 0x200>;
-				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi1>;
-				clocks = <&spi1_clk>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-
-			adc0: adc@fffe0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91sam9260-adc";
-				reg = <0xfffe0000 0x100>;
-				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&adc_clk>, <&adc_op_clk>;
-				clock-names = "adc_clk", "adc_op_clk";
-				atmel,adc-use-external-triggers;
-				atmel,adc-channels-used = <0xf>;
-				atmel,adc-vref = <3300>;
-				atmel,adc-startup-time = <15>;
-				atmel,adc-res = <8 10>;
-				atmel,adc-res-names = "lowres", "highres";
-				atmel,adc-use-res = "highres";
-
-				trigger0 {
-					trigger-name = "timer-counter-0";
-					trigger-value = <0x1>;
-				};
-				trigger1 {
-					trigger-name = "timer-counter-1";
-					trigger-value = <0x3>;
-				};
-
-				trigger2 {
-					trigger-name = "timer-counter-2";
-					trigger-value = <0x5>;
-				};
-
-				trigger3 {
-					trigger-name = "external";
-					trigger-value = <0xd>;
-					trigger-external;
-				};
-			};
-
-			rtc@fffffd20 {
-				compatible = "atmel,at91sam9260-rtt";
-				reg = <0xfffffd20 0x10>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
-				status = "disabled";
-			};
-
-			watchdog@fffffd40 {
-				compatible = "atmel,at91sam9260-wdt";
-				reg = <0xfffffd40 0x10>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
-				atmel,watchdog-type = "hardware";
-				atmel,reset-type = "all";
-				atmel,dbg-halt;
-				status = "disabled";
-			};
-
-			gpbr: syscon@fffffd50 {
-				compatible = "atmel,at91sam9260-gpbr", "syscon";
-				reg = <0xfffffd50 0x10>;
-				status = "disabled";
-			};
-		};
-
-		usb0: ohci@500000 {
-			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
-			reg = <0x00500000 0x100000>;
-			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>;
-			clock-names = "ohci_clk", "hclk", "uhpck";
-			status = "disabled";
-		};
-
-		ebi: ebi@10000000 {
-			compatible = "atmel,at91sam9260-ebi";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			atmel,smc = <&smc>;
-			atmel,matrix = <&matrix>;
-			reg = <0x10000000 0x80000000>;
-			ranges = <0x0 0x0 0x10000000 0x10000000
-				  0x1 0x0 0x20000000 0x10000000
-				  0x2 0x0 0x30000000 0x10000000
-				  0x3 0x0 0x40000000 0x10000000
-				  0x4 0x0 0x50000000 0x10000000
-				  0x5 0x0 0x60000000 0x10000000
-				  0x6 0x0 0x70000000 0x10000000
-				  0x7 0x0 0x80000000 0x10000000>;
-			clocks = <&mck>;
-			status = "disabled";
-
-			nand_controller: nand-controller {
-				compatible = "atmel,at91sam9260-nand-controller";
-				#address-cells = <2>;
-				#size-cells = <1>;
-				ranges;
-				status = "disabled";
-			};
-		};
-	};
-
-	i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 24 GPIO_ACTIVE_HIGH /* scl */
-			>;
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c_gpio0>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
deleted file mode 100644
index b2578feceb08..000000000000
--- a/arch/arm/boot/dts/at91sam9260ek.dts
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * Device Tree file for Atmel at91sam9260 Evaluation Kit
- *
- *  Copyright (C) 2016 Atmel,
- *		  2016 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-#include "at91sam9260.dtsi"
-
-/ {
-	model = "Atmel at91sam9260ek";
-	compatible = "atmel,at91sam9260ek", "atmel,at91sam9260", "atmel,at91sam9";
-
-	chosen {
-		stdout-path = &dbgu;
-	};
-
-	memory {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <18432000>;
-		};
-	};
-
-	ahb {
-		apb {
-			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-
-			mmc0: mmc@fffa8000 {
-				pinctrl-0 = <
-					&pinctrl_board_mmc0_slot1
-					&pinctrl_mmc0_clk
-					&pinctrl_mmc0_slot1_cmd_dat0
-					&pinctrl_mmc0_slot1_dat1_3>;
-				status = "okay";
-				slot@1 {
-					reg = <1>;
-					bus-width = <4>;
-					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			usart0: serial@fffb0000 {
-				pinctrl-0 =
-					<&pinctrl_usart0
-					 &pinctrl_usart0_rts
-					 &pinctrl_usart0_cts
-					 &pinctrl_usart0_dtr_dsr
-					 &pinctrl_usart0_dcd
-					 &pinctrl_usart0_ri>;
-				status = "okay";
-			};
-
-			usart1: serial@fffb4000 {
-				status = "okay";
-			};
-
-			ssc0: ssc@fffbc000 {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_ssc0_tx>;
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			spi0: spi@fffc8000 {
-				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
-				mtd_dataflash@0 {
-					compatible = "atmel,at45", "atmel,dataflash";
-					spi-max-frequency = <50000000>;
-					reg = <1>;
-				};
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			pinctrl@fffff400 {
-				board {
-					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
-						atmel,pins =
-							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-				};
-			};
-
-			shdwc@fffffd10 {
-				atmel,wakeup-counter = <10>;
-				atmel,wakeup-rtt-timer;
-			};
-
-			rtc@fffffd20 {
-				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
-				status = "okay";
-			};
-
-			watchdog@fffffd40 {
-				status = "okay";
-			};
-
-			gpbr: syscon@fffffd50 {
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@500000 {
-			num-ports = <2>;
-			status = "okay";
-		};
-
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
-			status = "okay";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		btn3 {
-			label = "Button 3";
-			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
-			linux,code = <0x103>;
-			wakeup-source;
-		};
-
-		btn4 {
-			label = "Button 4";
-			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
-			wakeup-source;
-		};
-	};
-
-	i2c-gpio-0 {
-		status = "okay";
-
-		24c512@50 {
-			compatible = "24c512";
-			reg = <0x50>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		ds1 {
-			label = "ds1";
-			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		ds5 {
-			label = "ds5";
-			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
deleted file mode 100644
index a05353f96151..000000000000
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ /dev/null
@@ -1,896 +0,0 @@
-/*
- * at91sam9261.dtsi - Device Tree Include file for AT91SAM9261 SoC
- *
- *  Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
- *
- * Licensed under GPLv2 only.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/at91.h>
-
-/ {
-	model = "Atmel AT91SAM9261 family SoC";
-	compatible = "atmel,at91sam9261";
-	interrupt-parent = <&aic>;
-
-	aliases {
-		serial0 = &dbgu;
-		serial1 = &usart0;
-		serial2 = &usart1;
-		serial3 = &usart2;
-		gpio0 = &pioA;
-		gpio1 = &pioB;
-		gpio2 = &pioC;
-		tcb0 = &tcb0;
-		i2c0 = &i2c0;
-		ssc0 = &ssc0;
-		ssc1 = &ssc1;
-		ssc2 = &ssc2;
-	};
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-		};
-	};
-
-	memory {
-		reg = <0x20000000 0x08000000>;
-	};
-
-	clocks {
-		main_xtal: main_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		slow_xtal: slow_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	sram: sram@00300000 {
-		compatible = "mmio-sram";
-		reg = <0x00300000 0x28000>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		usb0: ohci@00500000 {
-			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
-			reg = <0x00500000 0x100000>;
-			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&ohci_clk>, <&hclk0>, <&uhpck>;
-			clock-names = "ohci_clk", "hclk", "uhpck";
-			status = "disabled";
-		};
-
-		fb0: fb@0x00600000 {
-			compatible = "atmel,at91sam9261-lcdc";
-			reg = <0x00600000 0x1000>;
-			interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_fb>;
-			clocks = <&lcd_clk>, <&hclk1>;
-			clock-names = "lcdc_clk", "hclk";
-			status = "disabled";
-		};
-
-		ebi: ebi@10000000 {
-			compatible = "atmel,at91sam9261-ebi";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			atmel,smc = <&smc>;
-			atmel,matrix = <&matrix>;
-			reg = <0x10000000 0x80000000>;
-			ranges = <0x0 0x0 0x10000000 0x10000000
-				  0x1 0x0 0x20000000 0x10000000
-				  0x2 0x0 0x30000000 0x10000000
-				  0x3 0x0 0x40000000 0x10000000
-				  0x4 0x0 0x50000000 0x10000000
-				  0x5 0x0 0x60000000 0x10000000
-				  0x6 0x0 0x70000000 0x10000000
-				  0x7 0x0 0x80000000 0x10000000>;
-			clocks = <&mck>;
-			status = "disabled";
-
-			nand_controller: nand-controller {
-				compatible = "atmel,at91sam9261-nand-controller";
-				#address-cells = <2>;
-				#size-cells = <1>;
-				ranges;
-				status = "disabled";
-			};
-		};
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			tcb0: timer@fffa0000 {
-				compatible = "atmel,at91rm9200-tcb";
-				reg = <0xfffa0000 0x100>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
-					     <18 IRQ_TYPE_LEVEL_HIGH 0>,
-					     <19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&slow_xtal>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
-			};
-
-			usb1: gadget@fffa4000 {
-				compatible = "atmel,at91sam9261-udc";
-				reg = <0xfffa4000 0x4000>;
-				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&udc_clk>, <&udpck>;
-				clock-names = "pclk", "hclk";
-				atmel,matrix = <&matrix>;
-				status = "disabled";
-			};
-
-			mmc0: mmc@fffa8000 {
-				compatible = "atmel,hsmci";
-				reg = <0xfffa8000 0x600>;
-				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mmc0_clk>, <&pinctrl_mmc0_slot0_cmd_dat0>, <&pinctrl_mmc0_slot0_dat1_3>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&mci0_clk>;
-				clock-names = "mci_clk";
-				status = "disabled";
-			};
-
-			i2c0: i2c@fffac000 {
-				compatible = "atmel,at91sam9261-i2c";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c_twi>;
-				reg = <0xfffac000 0x100>;
-				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&twi0_clk>;
-				status = "disabled";
-			};
-
-			usart0: serial@fffb0000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb0000 0x200>;
-				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart0>;
-				clocks = <&usart0_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart1: serial@fffb4000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb4000 0x200>;
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart1>;
-				clocks = <&usart1_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart2: serial@fffb8000{
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb8000 0x200>;
-				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart2>;
-				clocks = <&usart2_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			ssc0: ssc@fffbc000 {
-				compatible = "atmel,at91rm9200-ssc";
-				reg = <0xfffbc000 0x4000>;
-				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&ssc0_clk>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			ssc1: ssc@fffc0000 {
-				compatible = "atmel,at91rm9200-ssc";
-				reg = <0xfffc0000 0x4000>;
-				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
-				clocks = <&ssc1_clk>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			ssc2: ssc@fffc4000 {
-				compatible = "atmel,at91rm9200-ssc";
-				reg = <0xfffc4000 0x4000>;
-				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
-				clocks = <&ssc2_clk>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			spi0: spi@fffc8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xfffc8000 0x200>;
-				cs-gpios = <0>, <0>, <0>, <0>;
-				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&spi0_clk>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-
-			spi1: spi@fffcc000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xfffcc000 0x200>;
-				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi1>;
-				clocks = <&spi1_clk>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-
-			ramc: ramc@ffffea00 {
-				compatible = "atmel,at91sam9260-sdramc";
-				reg = <0xffffea00 0x200>;
-			};
-
-			smc: smc@ffffec00 {
-				compatible = "atmel,at91sam9260-smc", "syscon";
-				reg = <0xffffec00 0x200>;
-			};
-
-			matrix: matrix@ffffee00 {
-				compatible = "atmel,at91sam9261-matrix", "syscon";
-				reg = <0xffffee00 0x200>;
-			};
-
-			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <3>;
-				compatible = "atmel,at91rm9200-aic";
-				interrupt-controller;
-				reg = <0xfffff000 0x200>;
-				atmel,external-irqs = <29 30 31>;
-			};
-
-			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
-				reg = <0xfffff200 0x200>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&mck>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			pinctrl@fffff400 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
-				ranges = <0xfffff400 0xfffff400 0x600>;
-
-				atmel,mux-mask =
-				      /*    A         B     */
-				      <0xffffffff 0xfffffff7>,  /* pioA */
-				      <0xffffffff 0xfffffff4>,  /* pioB */
-				      <0xffffffff 0xffffff07>;  /* pioC */
-
-				/* shared pinctrl settings */
-				dbgu {
-					pinctrl_dbgu: dbgu-0 {
-						atmel,pins =
-							<AT91_PIOA 9  AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				usart0 {
-					pinctrl_usart0: usart0-0 {
-						atmel,pins =
-							<AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart0_rts: usart0_rts-0 {
-						atmel,pins =
-							<AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart0_cts: usart0_cts-0 {
-						atmel,pins =
-							<AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				usart1 {
-					pinctrl_usart1: usart1-0 {
-						atmel,pins =
-							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart1_rts: usart1_rts-0 {
-						atmel,pins =
-							<AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart1_cts: usart1_cts-0 {
-						atmel,pins =
-							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				usart2 {
-					pinctrl_usart2: usart2-0 {
-						atmel,pins =
-							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart2_rts: usart2_rts-0 {
-						atmel,pins =
-							<AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart2_cts: usart2_cts-0 {
-						atmel,pins =
-							<AT91_PIOA 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				nand {
-					pinctrl_nand_rb: nand-rb-0 {
-						atmel,pins =
-							<AT91_PIOC 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_nand_cs: nand-cs-0 {
-						atmel,pins =
-							<AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-				};
-
-				mmc0 {
-					pinctrl_mmc0_clk: mmc0_clk-0 {
-						atmel,pins =
-							<AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
-					};
-					};
-
-				ssc0 {
-					pinctrl_ssc0_tx: ssc0_tx-0 {
-						atmel,pins =
-							<AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_ssc0_rx: ssc0_rx-0 {
-						atmel,pins =
-							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				ssc1 {
-					pinctrl_ssc1_tx: ssc1_tx-0 {
-						atmel,pins =
-							<AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_ssc1_rx: ssc1_rx-0 {
-						atmel,pins =
-							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				ssc2 {
-					pinctrl_ssc2_tx: ssc2_tx-0 {
-						atmel,pins =
-							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_ssc2_rx: ssc2_rx-0 {
-						atmel,pins =
-							<AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				spi0 {
-					pinctrl_spi0: spi0-0 {
-						atmel,pins =
-							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-					};
-
-				spi1 {
-					pinctrl_spi1: spi1-0 {
-						atmel,pins =
-							<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				tcb0 {
-					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
-						atmel,pins = <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
-						atmel,pins = <AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
-						atmel,pins = <AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
-						atmel,pins = <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
-						atmel,pins = <AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
-						atmel,pins = <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
-						atmel,pins = <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
-						atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
-						atmel,pins = <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				i2c0 {
-					pinctrl_i2c_bitbang: i2c-0-bitbang {
-						atmel,pins =
-							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
-							<AT91_PIOA 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-					pinctrl_i2c_twi: i2c-0-twi {
-						atmel,pins =
-							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				fb {
-					pinctrl_fb: fb-0 {
-						atmel,pins =
-							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				pioA: gpio@fffff400 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff400 0x200>;
-					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioA_clk>;
-				};
-
-				pioB: gpio@fffff600 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff600 0x200>;
-					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioB_clk>;
-				};
-
-				pioC: gpio@fffff800 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff800 0x200>;
-					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioC_clk>;
-				};
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc", "syscon";
-				reg = <0xfffffc00 0x100>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-
-				main_osc: main_osc {
-					compatible = "atmel,at91rm9200-clk-main-osc";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
-					clocks = <&main_xtal>;
-				};
-
-				main: mainck {
-					compatible = "atmel,at91rm9200-clk-main";
-					#clock-cells = <0>;
-					clocks = <&main_osc>;
-				};
-
-				plla: pllack {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
-					clocks = <&main>;
-					reg = <0>;
-					atmel,clk-input-range = <1000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
-								<190000000 240000000 2 1>;
-				};
-
-				pllb: pllbck {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKB>;
-					clocks = <&main>;
-					reg = <1>;
-					atmel,clk-input-range = <1000000 5000000>;
-					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
-				};
-
-				mck: masterck {
-					compatible = "atmel,at91rm9200-clk-master";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
-					clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
-					atmel,clk-output-range = <0 94000000>;
-					atmel,clk-divisors = <1 2 4 0>;
-				};
-
-				usb: usbck {
-					compatible = "atmel,at91rm9200-clk-usb";
-					#clock-cells = <0>;
-					atmel,clk-divisors = <1 2 4 0>;
-					clocks = <&pllb>;
-				};
-
-				prog: progck {
-					compatible = "atmel,at91rm9200-clk-programmable";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					interrupt-parent = <&pmc>;
-					clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
-
-					prog0: prog0 {
-						#clock-cells = <0>;
-						reg = <0>;
-						interrupts = <AT91_PMC_PCKRDY(0)>;
-					};
-
-					prog1: prog1 {
-						#clock-cells = <0>;
-						reg = <1>;
-						interrupts = <AT91_PMC_PCKRDY(1)>;
-					};
-
-					prog2: prog2 {
-						#clock-cells = <0>;
-						reg = <2>;
-						interrupts = <AT91_PMC_PCKRDY(2)>;
-					};
-
-					prog3: prog3 {
-						#clock-cells = <0>;
-						reg = <3>;
-						interrupts = <AT91_PMC_PCKRDY(3)>;
-					};
-				};
-
-				systemck {
-					compatible = "atmel,at91rm9200-clk-system";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					uhpck: uhpck {
-						#clock-cells = <0>;
-						reg = <6>;
-						clocks = <&usb>;
-					};
-
-					udpck: udpck {
-						#clock-cells = <0>;
-						reg = <7>;
-						clocks = <&usb>;
-					};
-
-					pck0: pck0 {
-						#clock-cells = <0>;
-						reg = <8>;
-						clocks = <&prog0>;
-					};
-
-					pck1: pck1 {
-						#clock-cells = <0>;
-						reg = <9>;
-						clocks = <&prog1>;
-					};
-
-					pck2: pck2 {
-						#clock-cells = <0>;
-						reg = <10>;
-						clocks = <&prog2>;
-					};
-
-					pck3: pck3 {
-						#clock-cells = <0>;
-						reg = <11>;
-						clocks = <&prog3>;
-					};
-
-					hclk0: hclk0 {
-						#clock-cells = <0>;
-						reg = <16>;
-						clocks = <&mck>;
-					};
-
-					hclk1: hclk1 {
-						#clock-cells = <0>;
-						reg = <17>;
-						clocks = <&mck>;
-					};
-				};
-
-				periphck {
-					compatible = "atmel,at91rm9200-clk-peripheral";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&mck>;
-
-					pioA_clk: pioA_clk {
-						#clock-cells = <0>;
-						reg = <2>;
-					};
-
-					pioB_clk: pioB_clk {
-						#clock-cells = <0>;
-						reg = <3>;
-					};
-
-					pioC_clk: pioC_clk {
-						#clock-cells = <0>;
-						reg = <4>;
-					};
-
-					usart0_clk: usart0_clk {
-						#clock-cells = <0>;
-						reg = <6>;
-					};
-
-					usart1_clk: usart1_clk {
-						#clock-cells = <0>;
-						reg = <7>;
-					};
-
-					usart2_clk: usart2_clk {
-						#clock-cells = <0>;
-						reg = <8>;
-					};
-
-					mci0_clk: mci0_clk {
-						#clock-cells = <0>;
-						reg = <9>;
-					};
-
-					udc_clk: udc_clk {
-						#clock-cells = <0>;
-						reg = <10>;
-					};
-
-					twi0_clk: twi0_clk {
-						reg = <11>;
-						#clock-cells = <0>;
-					};
-
-					spi0_clk: spi0_clk {
-						#clock-cells = <0>;
-						reg = <12>;
-					};
-
-					spi1_clk: spi1_clk {
-						#clock-cells = <0>;
-						reg = <13>;
-					};
-
-					ssc0_clk: ssc0_clk {
-						#clock-cells = <0>;
-						reg = <14>;
-					};
-
-					ssc1_clk: ssc1_clk {
-						#clock-cells = <0>;
-						reg = <15>;
-					};
-
-					ssc2_clk: ssc2_clk {
-						#clock-cells = <0>;
-						reg = <16>;
-					};
-
-					tc0_clk: tc0_clk {
-						#clock-cells = <0>;
-						reg = <17>;
-					};
-
-					tc1_clk: tc1_clk {
-						#clock-cells = <0>;
-						reg = <18>;
-					};
-
-					tc2_clk: tc2_clk {
-						#clock-cells = <0>;
-						reg = <19>;
-					};
-
-					ohci_clk: ohci_clk {
-						#clock-cells = <0>;
-						reg = <20>;
-					};
-
-					lcd_clk: lcd_clk {
-						#clock-cells = <0>;
-						reg = <21>;
-					};
-				};
-			};
-
-			rstc@fffffd00 {
-				compatible = "atmel,at91sam9260-rstc";
-				reg = <0xfffffd00 0x10>;
-				clocks = <&slow_xtal>;
-			};
-
-			shdwc@fffffd10 {
-				compatible = "atmel,at91sam9260-shdwc";
-				reg = <0xfffffd10 0x10>;
-				clocks = <&slow_xtal>;
-			};
-
-			pit: timer@fffffd30 {
-				compatible = "atmel,at91sam9260-pit";
-				reg = <0xfffffd30 0xf>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&mck>;
-			};
-
-			rtc@fffffd20 {
-				compatible = "atmel,at91sam9260-rtt";
-				reg = <0xfffffd20 0x10>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&slow_xtal>;
-				status = "disabled";
-			};
-
-			watchdog@fffffd40 {
-				compatible = "atmel,at91sam9260-wdt";
-				reg = <0xfffffd40 0x10>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&slow_xtal>;
-				status = "disabled";
-			};
-
-			gpbr: syscon@fffffd50 {
-				compatible = "atmel,at91sam9260-gpbr", "syscon";
-				reg = <0xfffffd50 0x10>;
-				status = "disabled";
-			};
-		};
-	};
-
-	i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c_bitbang>;
-		gpios = <&pioA 7 GPIO_ACTIVE_HIGH>, /* sda */
-			<&pioA 8 GPIO_ACTIVE_HIGH>; /* scl */
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi
deleted file mode 100644
index 27de7dc0f0e0..000000000000
--- a/arch/arm/boot/dts/at91sam9g15.dtsi
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * at91sam9g15.dtsi - Device Tree Include file for AT91SAM9G15 SoC
- *
- * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
- */
-
-#include "at91sam9x5.dtsi"
-#include "at91sam9x5_lcd.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9G15 SoC";
-	compatible = "atmel,at91sam9g15", "atmel,at91sam9x5";
-
-	ahb {
-		apb {
-			pinctrl@fffff400 {
-				atmel,mux-mask = <
-				      /*    A         B          C     */
-				       0xffffffff 0xffe0399f 0x00000000  /* pioA */
-				       0x00040000 0x00047e3f 0x00000000  /* pioB */
-				       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
-				       0x003fffff 0x003f8000 0x00000000  /* pioD */
-				      >;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
deleted file mode 100644
index f59301618163..000000000000
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
- *
- *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
- */
-
-#include "at91sam9260.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9G20 family SoC";
-	compatible = "atmel,at91sam9g20";
-
-	memory {
-		reg = <0x20000000 0x08000000>;
-	};
-
-	sram0: sram@002ff000 {
-		status = "disabled";
-	};
-
-	sram1: sram@002fc000 {
-		compatible = "mmio-sram";
-		reg = <0x002fc000 0x8000>;
-	};
-
-	ahb {
-		apb {
-			i2c0: i2c@fffac000 {
-				compatible = "atmel,at91sam9g20-i2c";
-			};
-
-			ssc0: ssc@fffbc000 {
-				compatible = "atmel,at91sam9rl-ssc";
-			};
-
-			adc0: adc@fffe0000 {
-				atmel,adc-startup-time = <40>;
-			};
-
-			pmc: pmc@fffffc00 {
-				plla: pllack {
-					atmel,clk-input-range = <2000000 32000000>;
-					atmel,pll-clk-output-ranges = <745000000 800000000 0 0>,
-								<695000000 750000000 1 0>,
-								<645000000 700000000 2 0>,
-								<595000000 650000000 3 0>,
-								<545000000 600000000 0 1>,
-								<495000000 550000000 1 1>,
-								<445000000 500000000 2 1>,
-								<400000000 450000000 3 1>;
-				};
-
-				pllb: pllbck {
-					compatible = "atmel,at91sam9g20-clk-pllb";
-					atmel,clk-input-range = <2000000 32000000>;
-					atmel,pll-clk-output-ranges = <30000000 100000000 0 0>;
-				};
-
-				mck: masterck {
-					atmel,clk-output-range = <0 133000000>;
-					atmel,clk-divisors = <1 2 4 6>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
deleted file mode 100644
index ac9a1511e239..000000000000
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board
- *
- * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
- */
-#include "at91sam9g20.dtsi"
-
-/ {
-
-	chosen {
-		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <18432000>;
-		};
-	};
-
-	ahb {
-		apb {
-			pinctrl@fffff400 {
-				board {
-					pinctrl_pck0_as_mck: pck0_as_mck {
-						atmel,pins =
-							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC1 periph B */
-					};
-
-				};
-
-				mmc0_slot1 {
-					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
-						atmel,pins =
-							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PC9 gpio CD pin pull up and deglitch */
-					};
-				};
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			usart0: serial@fffb0000 {
-				pinctrl-0 =
-					<&pinctrl_usart0
-					 &pinctrl_usart0_rts
-					 &pinctrl_usart0_cts
-					 &pinctrl_usart0_dtr_dsr
-					 &pinctrl_usart0_dcd
-					 &pinctrl_usart0_ri>;
-				status = "okay";
-			};
-
-			usart1: serial@fffb4000 {
-				status = "okay";
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-
-			mmc0: mmc@fffa8000 {
-				pinctrl-0 = <
-					&pinctrl_board_mmc0_slot1
-					&pinctrl_mmc0_clk
-					&pinctrl_mmc0_slot1_cmd_dat0
-					&pinctrl_mmc0_slot1_dat1_3>;
-				status = "okay";
-				slot@1 {
-					reg = <1>;
-					bus-width = <4>;
-					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			ssc0: ssc@fffbc000 {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_ssc0_tx>;
-			};
-
-			spi0: spi@fffc8000 {
-				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
-				mtd_dataflash@0 {
-					compatible = "atmel,at45", "atmel,dataflash";
-					spi-max-frequency = <50000000>;
-					reg = <1>;
-				};
-			};
-
-			shdwc@fffffd10 {
-				atmel,wakeup-counter = <10>;
-				atmel,wakeup-rtt-timer;
-			};
-
-			rtc@fffffd20 {
-				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
-				status = "okay";
-			};
-
-			watchdog@fffffd40 {
-				status = "okay";
-			};
-
-			gpbr: syscon@fffffd50 {
-				status = "okay";
-			};
-		};
-
-		ebi: ebi@10000000 {
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
-				pinctrl-names = "default";
-
-				nand@3 {
-					reg = <0x3 0x0 0x800000>;
-					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "soft";
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						at91bootstrap@0 {
-							label = "at91bootstrap";
-							reg = <0x0 0x20000>;
-						};
-
-						barebox@20000 {
-							label = "barebox";
-							reg = <0x20000 0x40000>;
-						};
-
-						bareboxenv@60000 {
-							label = "bareboxenv";
-							reg = <0x60000 0x20000>;
-						};
-
-						bareboxenv2@80000 {
-							label = "bareboxenv2";
-							reg = <0x80000 0x20000>;
-						};
-
-						oftree@80000 {
-							label = "oftree";
-							reg = <0xa0000 0x20000>;
-						};
-
-						kernel@a0000 {
-							label = "kernel";
-							reg = <0xc0000 0x400000>;
-						};
-
-						rootfs@4a0000 {
-							label = "rootfs";
-							reg = <0x4c0000 0x7800000>;
-						};
-
-						data@7ca0000 {
-							label = "data";
-							reg = <0x7cc0000 0x8340000>;
-						};
-					};
-				};
-			};
-		};
-
-		usb0: ohci@500000 {
-			num-ports = <2>;
-			status = "okay";
-		};
-	};
-
-	i2c-gpio-0 {
-		status = "okay";
-
-		24c512@50 {
-			compatible = "24c512";
-			reg = <0x50>;
-		};
-
-		wm8731: wm8731@1b {
-			compatible = "wm8731";
-			reg = <0x1b>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		btn3 {
-			label = "Button 3";
-			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
-			linux,code = <0x103>;
-			wakeup-source;
-		};
-
-		btn4 {
-			label = "Button 4";
-			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
-			wakeup-source;
-		};
-	};
-
-	sound {
-		compatible = "atmel,at91sam9g20ek-wm8731-audio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pck0_as_mck>;
-
-		atmel,model = "wm8731 @ AT91SAMG20EK";
-
-		atmel,audio-routing =
-			"Ext Spk", "LHPOUT",
-			"Int Mic", "MICIN";
-
-		atmel,ssc-controller = <&ssc0>;
-		atmel,audio-codec = <&wm8731>;
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
deleted file mode 100644
index 91a71774472e..000000000000
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
- *
- *  Copyright (C) 2012 Atmel,
- *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-/dts-v1/;
-#include "at91sam9g25.dtsi"
-#include "at91sam9x5ek.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9G25-EK";
-	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	ahb {
-		apb {
-			spi0: spi@f0000000 {
-				status = "disabled";
-			};
-
-			mmc1: mmc@f000c000 {
-				status = "disabled";
-			};
-
-			i2c0: i2c@f8010000 {
-				ov2640: camera@0x30 {
-					compatible = "ovti,ov2640";
-					reg = <0x30>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
-					resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
-					pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
-					clocks = <&pck0>;
-					clock-names = "xvclk";
-					assigned-clocks = <&pck0>;
-					assigned-clock-rates = <25000000>;
-					status = "okay";
-
-					port {
-						ov2640_0: endpoint {
-							remote-endpoint = <&isi_0>;
-							bus-width = <8>;
-						};
-					};
-				};
-			};
-
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			isi: isi@f8048000 {
-				status = "okay";
-				port {
-					isi_0: endpoint@0 {
-						reg = <0>;
-						remote-endpoint = <&ov2640_0>;
-						bus-width = <8>;
-						vsync-active = <1>;
-						hsync-active = <1>;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
deleted file mode 100644
index a4808c4fbc05..000000000000
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ /dev/null
@@ -1,1351 +0,0 @@
-/*
- * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC
- *                    applies to AT91SAM9G45, AT91SAM9M10,
- *                    AT91SAM9G46, AT91SAM9M11 SoC
- *
- *  Copyright (C) 2011 Atmel,
- *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/dma/at91.h>
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/at91.h>
-
-/ {
-	model = "Atmel AT91SAM9G45 family SoC";
-	compatible = "atmel,at91sam9g45";
-	interrupt-parent = <&aic>;
-
-	aliases {
-		serial0 = &dbgu;
-		serial1 = &usart0;
-		serial2 = &usart1;
-		serial3 = &usart2;
-		serial4 = &usart3;
-		gpio0 = &pioA;
-		gpio1 = &pioB;
-		gpio2 = &pioC;
-		gpio3 = &pioD;
-		gpio4 = &pioE;
-		tcb0 = &tcb0;
-		tcb1 = &tcb1;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		ssc0 = &ssc0;
-		ssc1 = &ssc1;
-		pwm0 = &pwm0;
-	};
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-		};
-	};
-
-	memory {
-		reg = <0x70000000 0x10000000>;
-	};
-
-	clocks {
-		slow_xtal: slow_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		main_xtal: main_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		adc_op_clk: adc_op_clk{
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <300000>;
-		};
-	};
-
-	sram: sram@00300000 {
-		compatible = "mmio-sram";
-		reg = <0x00300000 0x10000>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <3>;
-				compatible = "atmel,at91rm9200-aic";
-				interrupt-controller;
-				reg = <0xfffff000 0x200>;
-				atmel,external-irqs = <31>;
-			};
-
-			ramc0: ramc@ffffe400 {
-				compatible = "atmel,at91sam9g45-ddramc";
-				reg = <0xffffe400 0x200>;
-				clocks = <&ddrck>;
-				clock-names = "ddrck";
-			};
-
-			ramc1: ramc@ffffe600 {
-				compatible = "atmel,at91sam9g45-ddramc";
-				reg = <0xffffe600 0x200>;
-				clocks = <&ddrck>;
-				clock-names = "ddrck";
-			};
-
-			smc: smc@ffffe800 {
-				compatible = "atmel,at91sam9260-smc", "syscon";
-				reg = <0xffffe800 0x200>;
-			};
-
-			matrix: matrix@ffffea00 {
-				compatible = "atmel,at91sam9g45-matrix", "syscon";
-				reg = <0xffffea00 0x200>;
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9g45-pmc", "syscon";
-				reg = <0xfffffc00 0x100>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-
-				main_osc: main_osc {
-					compatible = "atmel,at91rm9200-clk-main-osc";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
-					clocks = <&main_xtal>;
-				};
-
-				main: mainck {
-					compatible = "atmel,at91rm9200-clk-main";
-					#clock-cells = <0>;
-					clocks = <&main_osc>;
-				};
-
-				plla: pllack {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
-					clocks = <&main>;
-					reg = <0>;
-					atmel,clk-input-range = <2000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <745000000 800000000 0 0
-								       695000000 750000000 1 0
-								       645000000 700000000 2 0
-								       595000000 650000000 3 0
-								       545000000 600000000 0 1
-								       495000000 555000000 1 1
-								       445000000 500000000 2 1
-								       400000000 450000000 3 1>;
-				};
-
-				plladiv: plladivck {
-					compatible = "atmel,at91sam9x5-clk-plldiv";
-					#clock-cells = <0>;
-					clocks = <&plla>;
-				};
-
-				utmi: utmick {
-					compatible = "atmel,at91sam9x5-clk-utmi";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKU>;
-					clocks = <&main>;
-				};
-
-				mck: masterck {
-					compatible = "atmel,at91rm9200-clk-master";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
-					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
-					atmel,clk-output-range = <0 133333333>;
-					atmel,clk-divisors = <1 2 4 3>;
-				};
-
-				usb: usbck {
-					compatible = "atmel,at91sam9x5-clk-usb";
-					#clock-cells = <0>;
-					clocks = <&plladiv>, <&utmi>;
-				};
-
-				prog: progck {
-					compatible = "atmel,at91sam9g45-clk-programmable";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					interrupt-parent = <&pmc>;
-					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
-
-					prog0: prog0 {
-						#clock-cells = <0>;
-						reg = <0>;
-						interrupts = <AT91_PMC_PCKRDY(0)>;
-					};
-
-					prog1: prog1 {
-						#clock-cells = <0>;
-						reg = <1>;
-						interrupts = <AT91_PMC_PCKRDY(1)>;
-					};
-				};
-
-				systemck {
-					compatible = "atmel,at91rm9200-clk-system";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					ddrck: ddrck {
-						#clock-cells = <0>;
-						reg = <2>;
-						clocks = <&mck>;
-					};
-
-					uhpck: uhpck {
-						#clock-cells = <0>;
-						reg = <6>;
-						clocks = <&usb>;
-					};
-
-					pck0: pck0 {
-						#clock-cells = <0>;
-						reg = <8>;
-						clocks = <&prog0>;
-					};
-
-					pck1: pck1 {
-						#clock-cells = <0>;
-						reg = <9>;
-						clocks = <&prog1>;
-					};
-				};
-
-				periphck {
-					compatible = "atmel,at91rm9200-clk-peripheral";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&mck>;
-
-					pioA_clk: pioA_clk {
-						#clock-cells = <0>;
-						reg = <2>;
-					};
-
-					pioB_clk: pioB_clk {
-						#clock-cells = <0>;
-						reg = <3>;
-					};
-
-					pioC_clk: pioC_clk {
-						#clock-cells = <0>;
-						reg = <4>;
-					};
-
-					pioDE_clk: pioDE_clk {
-						#clock-cells = <0>;
-						reg = <5>;
-					};
-
-					trng_clk: trng_clk {
-						#clock-cells = <0>;
-						reg = <6>;
-					};
-
-					usart0_clk: usart0_clk {
-						#clock-cells = <0>;
-						reg = <7>;
-					};
-
-					usart1_clk: usart1_clk {
-						#clock-cells = <0>;
-						reg = <8>;
-					};
-
-					usart2_clk: usart2_clk {
-						#clock-cells = <0>;
-						reg = <9>;
-					};
-
-					usart3_clk: usart3_clk {
-						#clock-cells = <0>;
-						reg = <10>;
-					};
-
-					mci0_clk: mci0_clk {
-						#clock-cells = <0>;
-						reg = <11>;
-					};
-
-					twi0_clk: twi0_clk {
-						#clock-cells = <0>;
-						reg = <12>;
-					};
-
-					twi1_clk: twi1_clk {
-						#clock-cells = <0>;
-						reg = <13>;
-					};
-
-					spi0_clk: spi0_clk {
-						#clock-cells = <0>;
-						reg = <14>;
-					};
-
-					spi1_clk: spi1_clk {
-						#clock-cells = <0>;
-						reg = <15>;
-					};
-
-					ssc0_clk: ssc0_clk {
-						#clock-cells = <0>;
-						reg = <16>;
-					};
-
-					ssc1_clk: ssc1_clk {
-						#clock-cells = <0>;
-						reg = <17>;
-					};
-
-					tcb0_clk: tcb0_clk {
-						#clock-cells = <0>;
-						reg = <18>;
-					};
-
-					pwm_clk: pwm_clk {
-						#clock-cells = <0>;
-						reg = <19>;
-					};
-
-					adc_clk: adc_clk {
-						#clock-cells = <0>;
-						reg = <20>;
-					};
-
-					dma0_clk: dma0_clk {
-						#clock-cells = <0>;
-						reg = <21>;
-					};
-
-					uhphs_clk: uhphs_clk {
-						#clock-cells = <0>;
-						reg = <22>;
-					};
-
-					lcd_clk: lcd_clk {
-						#clock-cells = <0>;
-						reg = <23>;
-					};
-
-					ac97_clk: ac97_clk {
-						#clock-cells = <0>;
-						reg = <24>;
-					};
-
-					macb0_clk: macb0_clk {
-						#clock-cells = <0>;
-						reg = <25>;
-					};
-
-					isi_clk: isi_clk {
-						#clock-cells = <0>;
-						reg = <26>;
-					};
-
-					udphs_clk: udphs_clk {
-						#clock-cells = <0>;
-						reg = <27>;
-					};
-
-					aestdessha_clk: aestdessha_clk {
-						#clock-cells = <0>;
-						reg = <28>;
-					};
-
-					mci1_clk: mci1_clk {
-						#clock-cells = <0>;
-						reg = <29>;
-					};
-
-					vdec_clk: vdec_clk {
-						#clock-cells = <0>;
-						reg = <30>;
-					};
-				};
-			};
-
-			rstc@fffffd00 {
-				compatible = "atmel,at91sam9g45-rstc";
-				reg = <0xfffffd00 0x10>;
-				clocks = <&clk32k>;
-			};
-
-			pit: timer@fffffd30 {
-				compatible = "atmel,at91sam9260-pit";
-				reg = <0xfffffd30 0xf>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&mck>;
-			};
-
-
-			shdwc@fffffd10 {
-				compatible = "atmel,at91sam9rl-shdwc";
-				reg = <0xfffffd10 0x10>;
-				clocks = <&clk32k>;
-			};
-
-			tcb0: timer@fff7c000 {
-				compatible = "atmel,at91rm9200-tcb";
-				reg = <0xfff7c000 0x100>;
-				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
-			};
-
-			tcb1: timer@fffd4000 {
-				compatible = "atmel,at91rm9200-tcb";
-				reg = <0xfffd4000 0x100>;
-				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
-			};
-
-			dma: dma-controller@ffffec00 {
-				compatible = "atmel,at91sam9g45-dma";
-				reg = <0xffffec00 0x200>;
-				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
-				#dma-cells = <2>;
-				clocks = <&dma0_clk>;
-				clock-names = "dma_clk";
-			};
-
-			pinctrl@fffff200 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
-				ranges = <0xfffff200 0xfffff200 0xa00>;
-
-				atmel,mux-mask = <
-				      /*    A         B     */
-				       0xffffffff 0xffc003ff  /* pioA */
-				       0xffffffff 0x800f8f00  /* pioB */
-				       0xffffffff 0x00000e00  /* pioC */
-				       0xffffffff 0xff0c1381  /* pioD */
-				       0xffffffff 0x81ffff81  /* pioE */
-				      >;
-
-				/* shared pinctrl settings */
-				adc0 {
-					pinctrl_adc0_adtrg: adc0_adtrg {
-						atmel,pins = <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-					pinctrl_adc0_ad0: adc0_ad0 {
-						atmel,pins = <AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-					pinctrl_adc0_ad1: adc0_ad1 {
-						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-					pinctrl_adc0_ad2: adc0_ad2 {
-						atmel,pins = <AT91_PIOD 22 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-					pinctrl_adc0_ad3: adc0_ad3 {
-						atmel,pins = <AT91_PIOD 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-					pinctrl_adc0_ad4: adc0_ad4 {
-						atmel,pins = <AT91_PIOD 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-					pinctrl_adc0_ad5: adc0_ad5 {
-						atmel,pins = <AT91_PIOD 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-					pinctrl_adc0_ad6: adc0_ad6 {
-						atmel,pins = <AT91_PIOD 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-					pinctrl_adc0_ad7: adc0_ad7 {
-						atmel,pins = <AT91_PIOD 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-				};
-
-				dbgu {
-					pinctrl_dbgu: dbgu-0 {
-						atmel,pins =
-							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				i2c0 {
-					pinctrl_i2c0: i2c0-0 {
-						atmel,pins =
-							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA21 periph A TWCK0 */
-							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA20 periph A TWD0 */
-					};
-				};
-
-				i2c1 {
-					pinctrl_i2c1: i2c1-0 {
-						atmel,pins =
-							<AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A TWCK1 */
-							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A TWD1 */
-					};
-				};
-
-				isi {
-					pinctrl_isi_data_0_7: isi-0-data-0-7 {
-						atmel,pins =
-							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* D0 */
-							AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* D1 */
-							AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* D2 */
-							AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* D3 */
-							AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* D4 */
-							AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* D5 */
-							AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* D6 */
-							AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* D7 */
-							AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PCK */
-							AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* VSYNC */
-							AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* HSYNC */
-					};
-
-					pinctrl_isi_data_8_9: isi-0-data-8-9 {
-						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* D8 */
-							AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D9 */
-					};
-
-					pinctrl_isi_data_10_11: isi-0-data-10-11 {
-						atmel,pins =
-							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* D10 */
-							AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D11 */
-					};
-				};
-
-				usart0 {
-					pinctrl_usart0: usart0-0 {
-						atmel,pins =
-							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB19 periph A with pullup */
-							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A */
-					};
-
-					pinctrl_usart0_rts: usart0_rts-0 {
-						atmel,pins =
-							<AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB17 periph B */
-					};
-
-					pinctrl_usart0_cts: usart0_cts-0 {
-						atmel,pins =
-							<AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB15 periph B */
-					};
-				};
-
-				uart1 {
-					pinctrl_usart1: usart1-0 {
-						atmel,pins =
-							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB4 periph A with pullup */
-							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB5 periph A */
-					};
-
-					pinctrl_usart1_rts: usart1_rts-0 {
-						atmel,pins =
-							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD16 periph A */
-					};
-
-					pinctrl_usart1_cts: usart1_cts-0 {
-						atmel,pins =
-							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD17 periph A */
-					};
-				};
-
-				usart2 {
-					pinctrl_usart2: usart2-0 {
-						atmel,pins =
-							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB6 periph A with pullup */
-							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB7 periph A */
-					};
-
-					pinctrl_usart2_rts: usart2_rts-0 {
-						atmel,pins =
-							<AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC9 periph B */
-					};
-
-					pinctrl_usart2_cts: usart2_cts-0 {
-						atmel,pins =
-							<AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC11 periph B */
-					};
-				};
-
-				usart3 {
-					pinctrl_usart3: usart3-0 {
-						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB9 periph A with pullup */
-							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB8 periph A */
-					};
-
-					pinctrl_usart3_rts: usart3_rts-0 {
-						atmel,pins =
-							<AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B */
-					};
-
-					pinctrl_usart3_cts: usart3_cts-0 {
-						atmel,pins =
-							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA24 periph B */
-					};
-				};
-
-				nand {
-					pinctrl_nand_rb: nand-rb-0 {
-						atmel,pins =
-							<AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_nand_cs: nand-cs-0 {
-						atmel,pins =
-							 <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-				};
-
-				macb {
-					pinctrl_macb_rmii: macb_rmii-0 {
-						atmel,pins =
-							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA10 periph A */
-							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A */
-							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A */
-							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A */
-							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A */
-							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A */
-							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA16 periph A */
-							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
-							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA18 periph A */
-							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA19 periph A */
-					};
-
-					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
-						atmel,pins =
-							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA6 periph B */
-							 AT91_PIOA 7 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA7 periph B */
-							 AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA8 periph B */
-							 AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA9 periph B */
-							 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
-							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
-							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA29 periph B */
-							 AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA30 periph B */
-					};
-				};
-
-				mmc0 {
-					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A */
-							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA1 periph A with pullup */
-							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA2 periph A with pullup */
-					};
-
-					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA3 periph A with pullup */
-							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA4 periph A with pullup */
-							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA5 periph A with pullup */
-					};
-
-					pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
-						atmel,pins =
-							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA6 periph A with pullup */
-							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
-							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA8 periph A with pullup */
-							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA9 periph A with pullup */
-					};
-				};
-
-				mmc1 {
-					pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA31 periph A */
-							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA22 periph A with pullup */
-							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA23 periph A with pullup */
-					};
-
-					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA24 periph A with pullup */
-							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA25 periph A with pullup */
-							 AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA26 periph A with pullup */
-					};
-
-					pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 {
-						atmel,pins =
-							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA27 periph A with pullup */
-							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA28 periph A with pullup */
-							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA29 periph A with pullup */
-							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA30 periph A with pullup */
-					};
-				};
-
-				ssc0 {
-					pinctrl_ssc0_tx: ssc0_tx-0 {
-						atmel,pins =
-							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD0 periph A */
-							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD1 periph A */
-							 AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD2 periph A */
-					};
-
-					pinctrl_ssc0_rx: ssc0_rx-0 {
-						atmel,pins =
-							<AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD3 periph A */
-							 AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD4 periph A */
-							 AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD5 periph A */
-					};
-				};
-
-				ssc1 {
-					pinctrl_ssc1_tx: ssc1_tx-0 {
-						atmel,pins =
-							<AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD10 periph A */
-							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD11 periph A */
-							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD12 periph A */
-					};
-
-					pinctrl_ssc1_rx: ssc1_rx-0 {
-						atmel,pins =
-							<AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD13 periph A */
-							 AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD14 periph A */
-							 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD15 periph A */
-					};
-				};
-
-				spi0 {
-					pinctrl_spi0: spi0-0 {
-						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A SPI0_MISO pin */
-							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A SPI0_MOSI pin */
-							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB2 periph A SPI0_SPCK pin */
-					};
-				};
-
-				spi1 {
-					pinctrl_spi1: spi1-0 {
-						atmel,pins =
-							<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A SPI1_MISO pin */
-							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A SPI1_MOSI pin */
-							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB16 periph A SPI1_SPCK pin */
-					};
-				};
-
-				tcb0 {
-					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
-						atmel,pins = <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
-						atmel,pins = <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
-						atmel,pins = <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
-						atmel,pins = <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
-						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
-						atmel,pins = <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
-						atmel,pins = <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
-						atmel,pins = <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
-						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				tcb1 {
-					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
-						atmel,pins = <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
-						atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
-						atmel,pins = <AT91_PIOD 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
-						atmel,pins = <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
-						atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
-						atmel,pins = <AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
-						atmel,pins = <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
-						atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
-						atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				fb {
-					pinctrl_fb: fb-0 {
-						atmel,pins =
-							<AT91_PIOE 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE0 periph A */
-							 AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE2 periph A */
-							 AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE3 periph A */
-							 AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE4 periph A */
-							 AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE5 periph A */
-							 AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE6 periph A */
-							 AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE7 periph A */
-							 AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE8 periph A */
-							 AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE9 periph A */
-							 AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE10 periph A */
-							 AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE11 periph A */
-							 AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE12 periph A */
-							 AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE13 periph A */
-							 AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE14 periph A */
-							 AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE15 periph A */
-							 AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE16 periph A */
-							 AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE17 periph A */
-							 AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE18 periph A */
-							 AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE19 periph A */
-							 AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE20 periph A */
-							 AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE21 periph A */
-							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE22 periph A */
-							 AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE23 periph A */
-							 AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE24 periph A */
-							 AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE25 periph A */
-							 AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE26 periph A */
-							 AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE27 periph A */
-							 AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE28 periph A */
-							 AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE29 periph A */
-							 AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PE30 periph A */
-					};
-				};
-
-				pioA: gpio@fffff200 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff200 0x200>;
-					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioA_clk>;
-				};
-
-				pioB: gpio@fffff400 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff400 0x200>;
-					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioB_clk>;
-				};
-
-				pioC: gpio@fffff600 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff600 0x200>;
-					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioC_clk>;
-				};
-
-				pioD: gpio@fffff800 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff800 0x200>;
-					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioDE_clk>;
-				};
-
-				pioE: gpio@fffffa00 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffffa00 0x200>;
-					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioDE_clk>;
-				};
-			};
-
-			dbgu: serial@ffffee00 {
-				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
-				reg = <0xffffee00 0x200>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&mck>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart0: serial@fff8c000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfff8c000 0x200>;
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart0>;
-				clocks = <&usart0_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart1: serial@fff90000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfff90000 0x200>;
-				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart1>;
-				clocks = <&usart1_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart2: serial@fff94000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfff94000 0x200>;
-				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart2>;
-				clocks = <&usart2_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart3: serial@fff98000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfff98000 0x200>;
-				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart3>;
-				clocks = <&usart3_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			macb0: ethernet@fffbc000 {
-				compatible = "cdns,at91sam9260-macb", "cdns,macb";
-				reg = <0xfffbc000 0x100>;
-				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb_rmii>;
-				clocks = <&macb0_clk>, <&macb0_clk>;
-				clock-names = "hclk", "pclk";
-				status = "disabled";
-			};
-
-			trng@fffcc000 {
-				compatible = "atmel,at91sam9g45-trng";
-				reg = <0xfffcc000 0x100>;
-				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&trng_clk>;
-			};
-
-			i2c0: i2c@fff84000 {
-				compatible = "atmel,at91sam9g10-i2c";
-				reg = <0xfff84000 0x100>;
-				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&twi0_clk>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@fff88000 {
-				compatible = "atmel,at91sam9g10-i2c";
-				reg = <0xfff88000 0x100>;
-				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c1>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&twi1_clk>;
-				status = "disabled";
-			};
-
-			ssc0: ssc@fff9c000 {
-				compatible = "atmel,at91sam9g45-ssc";
-				reg = <0xfff9c000 0x4000>;
-				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&ssc0_clk>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			ssc1: ssc@fffa0000 {
-				compatible = "atmel,at91sam9g45-ssc";
-				reg = <0xfffa0000 0x4000>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
-				clocks = <&ssc1_clk>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			adc0: adc@fffb0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91sam9g45-adc";
-				reg = <0xfffb0000 0x100>;
-				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&adc_clk>, <&adc_op_clk>;
-				clock-names = "adc_clk", "adc_op_clk";
-				atmel,adc-channels-used = <0xff>;
-				atmel,adc-vref = <3300>;
-				atmel,adc-startup-time = <40>;
-				atmel,adc-res = <8 10>;
-				atmel,adc-res-names = "lowres", "highres";
-				atmel,adc-use-res = "highres";
-
-				trigger0 {
-					trigger-name = "external-rising";
-					trigger-value = <0x1>;
-					trigger-external;
-				};
-				trigger1 {
-					trigger-name = "external-falling";
-					trigger-value = <0x2>;
-					trigger-external;
-				};
-
-				trigger2 {
-					trigger-name = "external-any";
-					trigger-value = <0x3>;
-					trigger-external;
-				};
-
-				trigger3 {
-					trigger-name = "continuous";
-					trigger-value = <0x6>;
-				};
-			};
-
-			isi@fffb4000 {
-				compatible = "atmel,at91sam9g45-isi";
-				reg = <0xfffb4000 0x4000>;
-				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>;
-				clocks = <&isi_clk>;
-				clock-names = "isi_clk";
-				status = "disabled";
-				port {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-			};
-
-			pwm0: pwm@fffb8000 {
-				compatible = "atmel,at91sam9rl-pwm";
-				reg = <0xfffb8000 0x300>;
-				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
-				#pwm-cells = <3>;
-				clocks = <&pwm_clk>;
-				status = "disabled";
-			};
-
-			mmc0: mmc@fff80000 {
-				compatible = "atmel,hsmci";
-				reg = <0xfff80000 0x600>;
-				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
-				pinctrl-names = "default";
-				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
-				dma-names = "rxtx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&mci0_clk>;
-				clock-names = "mci_clk";
-				status = "disabled";
-			};
-
-			mmc1: mmc@fffd0000 {
-				compatible = "atmel,hsmci";
-				reg = <0xfffd0000 0x600>;
-				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>;
-				pinctrl-names = "default";
-				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>;
-				dma-names = "rxtx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&mci1_clk>;
-				clock-names = "mci_clk";
-				status = "disabled";
-			};
-
-			watchdog@fffffd40 {
-				compatible = "atmel,at91sam9260-wdt";
-				reg = <0xfffffd40 0x10>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
-				atmel,watchdog-type = "hardware";
-				atmel,reset-type = "all";
-				atmel,dbg-halt;
-				status = "disabled";
-			};
-
-			spi0: spi@fffa4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xfffa4000 0x200>;
-				interrupts = <14 4 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&spi0_clk>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-
-			spi1: spi@fffa8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xfffa8000 0x200>;
-				interrupts = <15 4 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi1>;
-				clocks = <&spi1_clk>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-
-			usb2: gadget@fff78000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91sam9g45-udc";
-				reg = <0x00600000 0x80000
-				       0xfff78000 0x400>;
-				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&udphs_clk>, <&utmi>;
-				clock-names = "pclk", "hclk";
-				status = "disabled";
-
-				ep@0 {
-					reg = <0>;
-					atmel,fifo-size = <64>;
-					atmel,nb-banks = <1>;
-				};
-
-				ep@1 {
-					reg = <1>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <2>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep@2 {
-					reg = <2>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <2>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep@3 {
-					reg = <3>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-				};
-
-				ep@4 {
-					reg = <4>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-				};
-
-				ep@5 {
-					reg = <5>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep@6 {
-					reg = <6>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-			};
-
-			sckc@fffffd50 {
-				compatible = "atmel,at91sam9x5-sckc";
-				reg = <0xfffffd50 0x4>;
-
-				slow_osc: slow_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-osc";
-					#clock-cells = <0>;
-					atmel,startup-time-usec = <1200000>;
-					clocks = <&slow_xtal>;
-				};
-
-				slow_rc_osc: slow_rc_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
-					#clock-cells = <0>;
-					atmel,startup-time-usec = <75>;
-					clock-frequency = <32768>;
-					clock-accuracy = <50000000>;
-				};
-
-				clk32k: slck {
-					compatible = "atmel,at91sam9x5-clk-slow";
-					#clock-cells = <0>;
-					clocks = <&slow_rc_osc &slow_osc>;
-				};
-			};
-
-			rtc@fffffd20 {
-				compatible = "atmel,at91sam9260-rtt";
-				reg = <0xfffffd20 0x10>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
-				status = "disabled";
-			};
-
-			rtc@fffffdb0 {
-				compatible = "atmel,at91rm9200-rtc";
-				reg = <0xfffffdb0 0x30>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
-				status = "disabled";
-			};
-
-			gpbr: syscon@fffffd60 {
-				compatible = "atmel,at91sam9260-gpbr", "syscon";
-				reg = <0xfffffd60 0x10>;
-				status = "disabled";
-			};
-		};
-
-		fb0: fb@0x00500000 {
-			compatible = "atmel,at91sam9g45-lcdc";
-			reg = <0x00500000 0x1000>;
-			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_fb>;
-			clocks = <&lcd_clk>, <&lcd_clk>;
-			clock-names = "hclk", "lcdc_clk";
-			status = "disabled";
-		};
-
-		usb0: ohci@00700000 {
-			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
-			reg = <0x00700000 0x100000>;
-			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
-			clock-names = "ohci_clk", "hclk", "uhpck";
-			status = "disabled";
-		};
-
-		usb1: ehci@00800000 {
-			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
-			reg = <0x00800000 0x100000>;
-			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&utmi>, <&uhphs_clk>;
-			clock-names = "usb_clk", "ehci_clk";
-			status = "disabled";
-		};
-
-		ebi: ebi@10000000 {
-			compatible = "atmel,at91sam9g45-ebi";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			atmel,smc = <&smc>;
-			atmel,matrix = <&matrix>;
-			reg = <0x10000000 0x80000000>;
-			ranges = <0x0 0x0 0x10000000 0x10000000
-				  0x1 0x0 0x20000000 0x10000000
-				  0x2 0x0 0x30000000 0x10000000
-				  0x3 0x0 0x40000000 0x10000000
-				  0x4 0x0 0x50000000 0x10000000
-				  0x5 0x0 0x60000000 0x10000000>;
-			clocks = <&mck>;
-			status = "disabled";
-
-			nand_controller: nand-controller {
-				compatible = "atmel,at91sam9g45-nand-controller";
-				#address-cells = <2>;
-				#size-cells = <1>;
-				ranges;
-				status = "disabled";
-			};
-		};
-	};
-
-	i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 21 GPIO_ACTIVE_HIGH /* scl */
-			>;
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <5>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
deleted file mode 100644
index 06516d02d351..000000000000
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ /dev/null
@@ -1,1069 +0,0 @@
-/*
- * at91sam9n12.dtsi - Device Tree include file for AT91SAM9N12 SoC
- *
- *  Copyright (C) 2012 Atmel,
- *                2012 Hong Xu <hong.xu@atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/dma/at91.h>
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/at91.h>
-
-/ {
-	model = "Atmel AT91SAM9N12 SoC";
-	compatible = "atmel,at91sam9n12";
-	interrupt-parent = <&aic>;
-
-	aliases {
-		serial0 = &dbgu;
-		serial1 = &usart0;
-		serial2 = &usart1;
-		serial3 = &usart2;
-		serial4 = &usart3;
-		gpio0 = &pioA;
-		gpio1 = &pioB;
-		gpio2 = &pioC;
-		gpio3 = &pioD;
-		tcb0 = &tcb0;
-		tcb1 = &tcb1;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		ssc0 = &ssc0;
-		pwm0 = &pwm0;
-	};
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-		};
-	};
-
-	memory {
-		reg = <0x20000000 0x10000000>;
-	};
-
-	clocks {
-		slow_xtal: slow_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		main_xtal: main_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	sram: sram@00300000 {
-		compatible = "mmio-sram";
-		reg = <0x00300000 0x8000>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <3>;
-				compatible = "atmel,at91rm9200-aic";
-				interrupt-controller;
-				reg = <0xfffff000 0x200>;
-				atmel,external-irqs = <31>;
-			};
-
-			matrix: matrix@ffffde00 {
-				compatible = "atmel,at91sam9n12-matrix", "syscon";
-				reg = <0xffffde00 0x100>;
-			};
-
-			pmecc: ecc-engine@ffffe000 {
-				compatible = "atmel,at91sam9g45-pmecc";
-				reg = <0xffffe000 0x600>,
-				      <0xffffe600 0x200>;
-			};
-
-			ramc0: ramc@ffffe800 {
-				compatible = "atmel,at91sam9g45-ddramc";
-				reg = <0xffffe800 0x200>;
-				clocks = <&ddrck>;
-				clock-names = "ddrck";
-			};
-
-			smc: smc@ffffea00 {
-				compatible = "atmel,at91sam9260-smc", "syscon";
-				reg = <0xffffea00 0x200>;
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9n12-pmc", "syscon";
-				reg = <0xfffffc00 0x200>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-
-				main_rc_osc: main_rc_osc {
-					compatible = "atmel,at91sam9x5-clk-main-rc-osc";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCRCS>;
-					clock-frequency = <12000000>;
-					clock-accuracy = <50000000>;
-				};
-
-				main_osc: main_osc {
-					compatible = "atmel,at91rm9200-clk-main-osc";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
-					clocks = <&main_xtal>;
-				};
-
-				main: mainck {
-					compatible = "atmel,at91sam9x5-clk-main";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCSELS>;
-					clocks = <&main_rc_osc>, <&main_osc>;
-				};
-
-				plla: pllack {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
-					clocks = <&main>;
-					reg = <0>;
-					atmel,clk-input-range = <2000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <745000000 800000000 0 0>,
-								      <695000000 750000000 1 0>,
-								      <645000000 700000000 2 0>,
-								      <595000000 650000000 3 0>,
-								      <545000000 600000000 0 1>,
-								      <495000000 555000000 1 1>,
-								      <445000000 500000000 2 1>,
-								      <400000000 450000000 3 1>;
-				};
-
-				plladiv: plladivck {
-					compatible = "atmel,at91sam9x5-clk-plldiv";
-					#clock-cells = <0>;
-					clocks = <&plla>;
-				};
-
-				pllb: pllbck {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKB>;
-					clocks = <&main>;
-					reg = <1>;
-					atmel,clk-input-range = <2000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <3>;
-					atmel,pll-clk-output-ranges = <30000000 100000000 0>;
-				};
-
-				mck: masterck {
-					compatible = "atmel,at91sam9x5-clk-master";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
-					clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>;
-					atmel,clk-output-range = <0 133333333>;
-					atmel,clk-divisors = <1 2 4 3>;
-					atmel,master-clk-have-div3-pres;
-				};
-
-				usb: usbck {
-					compatible = "atmel,at91sam9n12-clk-usb";
-					#clock-cells = <0>;
-					clocks = <&pllb>;
-				};
-
-				prog: progck {
-					compatible = "atmel,at91sam9x5-clk-programmable";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					interrupt-parent = <&pmc>;
-					clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>, <&mck>;
-
-					prog0: prog0 {
-						#clock-cells = <0>;
-						reg = <0>;
-						interrupts = <AT91_PMC_PCKRDY(0)>;
-					};
-
-					prog1: prog1 {
-						#clock-cells = <0>;
-						reg = <1>;
-						interrupts = <AT91_PMC_PCKRDY(1)>;
-					};
-				};
-
-				systemck {
-					compatible = "atmel,at91rm9200-clk-system";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					ddrck: ddrck {
-						#clock-cells = <0>;
-						reg = <2>;
-						clocks = <&mck>;
-					};
-
-					lcdck: lcdck {
-						#clock-cells = <0>;
-						reg = <3>;
-						clocks = <&mck>;
-					};
-
-					uhpck: uhpck {
-						#clock-cells = <0>;
-						reg = <6>;
-						clocks = <&usb>;
-					};
-
-					udpck: udpck {
-						#clock-cells = <0>;
-						reg = <7>;
-						clocks = <&usb>;
-					};
-
-					pck0: pck0 {
-						#clock-cells = <0>;
-						reg = <8>;
-						clocks = <&prog0>;
-					};
-
-					pck1: pck1 {
-						#clock-cells = <0>;
-						reg = <9>;
-						clocks = <&prog1>;
-					};
-				};
-
-				periphck {
-					compatible = "atmel,at91sam9x5-clk-peripheral";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&mck>;
-
-					pioAB_clk: pioAB_clk {
-						#clock-cells = <0>;
-						reg = <2>;
-					};
-
-					pioCD_clk: pioCD_clk {
-						#clock-cells = <0>;
-						reg = <3>;
-					};
-
-					fuse_clk: fuse_clk {
-						#clock-cells = <0>;
-						reg = <4>;
-					};
-
-					usart0_clk: usart0_clk {
-						#clock-cells = <0>;
-						reg = <5>;
-					};
-
-					usart1_clk: usart1_clk {
-						#clock-cells = <0>;
-						reg = <6>;
-					};
-
-					usart2_clk: usart2_clk {
-						#clock-cells = <0>;
-						reg = <7>;
-					};
-
-					usart3_clk: usart3_clk {
-						#clock-cells = <0>;
-						reg = <8>;
-					};
-
-					twi0_clk: twi0_clk {
-						reg = <9>;
-						#clock-cells = <0>;
-					};
-
-					twi1_clk: twi1_clk {
-						#clock-cells = <0>;
-						reg = <10>;
-					};
-
-					mci0_clk: mci0_clk {
-						#clock-cells = <0>;
-						reg = <12>;
-					};
-
-					spi0_clk: spi0_clk {
-						#clock-cells = <0>;
-						reg = <13>;
-					};
-
-					spi1_clk: spi1_clk {
-						#clock-cells = <0>;
-						reg = <14>;
-					};
-
-					uart0_clk: uart0_clk {
-						#clock-cells = <0>;
-						reg = <15>;
-					};
-
-					uart1_clk: uart1_clk {
-						#clock-cells = <0>;
-						reg = <16>;
-					};
-
-					tcb_clk: tcb_clk {
-						#clock-cells = <0>;
-						reg = <17>;
-					};
-
-					pwm_clk: pwm_clk {
-						#clock-cells = <0>;
-						reg = <18>;
-					};
-
-					adc_clk: adc_clk {
-						#clock-cells = <0>;
-						reg = <19>;
-					};
-
-					dma0_clk: dma0_clk {
-						#clock-cells = <0>;
-						reg = <20>;
-					};
-
-					uhphs_clk: uhphs_clk {
-						#clock-cells = <0>;
-						reg = <22>;
-					};
-
-					udphs_clk: udphs_clk {
-						#clock-cells = <0>;
-						reg = <23>;
-					};
-
-					lcdc_clk: lcdc_clk {
-						#clock-cells = <0>;
-						reg = <25>;
-					};
-
-					sha_clk: sha_clk {
-						#clock-cells = <0>;
-						reg = <27>;
-					};
-
-					ssc0_clk: ssc0_clk {
-						#clock-cells = <0>;
-						reg = <28>;
-					};
-
-					aes_clk: aes_clk {
-						#clock-cells = <0>;
-						reg = <29>;
-					};
-
-					trng_clk: trng_clk {
-						#clock-cells = <0>;
-						reg = <30>;
-					};
-				};
-			};
-
-			rstc@fffffe00 {
-				compatible = "atmel,at91sam9g45-rstc";
-				reg = <0xfffffe00 0x10>;
-				clocks = <&clk32k>;
-			};
-
-			pit: timer@fffffe30 {
-				compatible = "atmel,at91sam9260-pit";
-				reg = <0xfffffe30 0xf>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&mck>;
-			};
-
-			shdwc@fffffe10 {
-				compatible = "atmel,at91sam9x5-shdwc";
-				reg = <0xfffffe10 0x10>;
-				clocks = <&clk32k>;
-			};
-
-			sckc@fffffe50 {
-				compatible = "atmel,at91sam9x5-sckc";
-				reg = <0xfffffe50 0x4>;
-
-				slow_osc: slow_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-osc";
-					#clock-cells = <0>;
-					clocks = <&slow_xtal>;
-				};
-
-				slow_rc_osc: slow_rc_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
-					#clock-cells = <0>;
-					clock-frequency = <32768>;
-					clock-accuracy = <50000000>;
-				};
-
-				clk32k: slck {
-					compatible = "atmel,at91sam9x5-clk-slow";
-					#clock-cells = <0>;
-					clocks = <&slow_rc_osc>, <&slow_osc>;
-				};
-			};
-
-			mmc0: mmc@f0008000 {
-				compatible = "atmel,hsmci";
-				reg = <0xf0008000 0x600>;
-				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
-				dma-names = "rxtx";
-				clocks = <&mci0_clk>;
-				clock-names = "mci_clk";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			tcb0: timer@f8008000 {
-				compatible = "atmel,at91sam9x5-tcb";
-				reg = <0xf8008000 0x100>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb_clk>, <&clk32k>;
-				clock-names = "t0_clk", "slow_clk";
-			};
-
-			tcb1: timer@f800c000 {
-				compatible = "atmel,at91sam9x5-tcb";
-				reg = <0xf800c000 0x100>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb_clk>, <&clk32k>;
-				clock-names = "t0_clk", "slow_clk";
-			};
-
-			hlcdc: hlcdc@f8038000 {
-				compatible = "atmel,at91sam9n12-hlcdc";
-				reg = <0xf8038000 0x2000>;
-				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
-				clock-names = "periph_clk", "sys_clk", "slow_clk";
-				status = "disabled";
-
-				hlcdc-display-controller {
-					compatible = "atmel,hlcdc-display-controller";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						#address-cells = <1>;
-						#size-cells = <0>;
-						reg = <0>;
-					};
-				};
-
-				hlcdc_pwm: hlcdc-pwm {
-					compatible = "atmel,hlcdc-pwm";
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_lcd_pwm>;
-					#pwm-cells = <3>;
-				};
-			};
-
-			dma: dma-controller@ffffec00 {
-				compatible = "atmel,at91sam9g45-dma";
-				reg = <0xffffec00 0x200>;
-				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
-				#dma-cells = <2>;
-				clocks = <&dma0_clk>;
-				clock-names = "dma_clk";
-			};
-
-			pinctrl@fffff400 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
-				ranges = <0xfffff400 0xfffff400 0x800>;
-
-				atmel,mux-mask = <
-				      /*    A         B          C     */
-				       0xffffffff 0xffe07983 0x00000000  /* pioA */
-				       0x00040000 0x00047e0f 0x00000000  /* pioB */
-				       0xfdffffff 0x07c00000 0xb83fffff  /* pioC */
-				       0x003fffff 0x003f8000 0x00000000  /* pioD */
-				      >;
-
-				/* shared pinctrl settings */
-				dbgu {
-					pinctrl_dbgu: dbgu-0 {
-						atmel,pins =
-							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				lcd {
-					pinctrl_lcd_base: lcd-base-0 {
-						atmel,pins =
-							<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
-							 AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
-							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
-							 AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
-							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
-					};
-
-					pinctrl_lcd_pwm: lcd-pwm-0 {
-						atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
-					};
-
-					pinctrl_lcd_rgb888: lcd-rgb-3 {
-						atmel,pins =
-							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
-							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
-							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
-							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
-							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
-							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
-							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
-							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
-							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
-							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
-							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
-							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
-							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
-							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
-							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
-							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
-							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
-							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
-							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
-							 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
-							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
-							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
-							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
-							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
-					};
-				};
-
-				usart0 {
-					pinctrl_usart0: usart0-0 {
-						atmel,pins =
-							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA1 periph A with pullup */
-							 AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA0 periph A */
-					};
-
-					pinctrl_usart0_rts: usart0_rts-0 {
-						atmel,pins =
-							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A */
-					};
-
-					pinctrl_usart0_cts: usart0_cts-0 {
-						atmel,pins =
-							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA3 periph A */
-					};
-				};
-
-				usart1 {
-					pinctrl_usart1: usart1-0 {
-						atmel,pins =
-							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA6 periph A with pullup */
-							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA5 periph A */
-					};
-				};
-
-				usart2 {
-					pinctrl_usart2: usart2-0 {
-						atmel,pins =
-							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA8 periph A with pullup */
-							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA7 periph A */
-					};
-
-					pinctrl_usart2_rts: usart2_rts-0 {
-						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
-					};
-
-					pinctrl_usart2_cts: usart2_cts-0 {
-						atmel,pins =
-							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
-					};
-				};
-
-				usart3 {
-					pinctrl_usart3: usart3-0 {
-						atmel,pins =
-							<AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PC23 periph B with pullup */
-							 AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC22 periph B */
-					};
-
-					pinctrl_usart3_rts: usart3_rts-0 {
-						atmel,pins =
-							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC24 periph B */
-					};
-
-					pinctrl_usart3_cts: usart3_cts-0 {
-						atmel,pins =
-							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC25 periph B */
-					};
-				};
-
-				uart0 {
-					pinctrl_uart0: uart0-0 {
-						atmel,pins =
-							<AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* PC9 periph C with pullup */
-							 AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC8 periph C */
-					};
-				};
-
-				uart1 {
-					pinctrl_uart1: uart1-0 {
-						atmel,pins =
-							<AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* PC17 periph C with pullup */
-							 AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC16 periph C */
-					};
-				};
-
-				nand {
-					pinctrl_nand_rb: nand-rb-0 {
-						atmel,pins =
-							<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_nand_cs: nand-cs-0 {
-						atmel,pins =
-							 <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-				};
-
-				mmc0 {
-					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
-							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA16 periph A with pullup */
-							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA15 periph A with pullup */
-					};
-
-					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA18 periph A with pullup */
-							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA19 periph A with pullup */
-							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA20 periph A with pullup */
-					};
-
-					pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
-						atmel,pins =
-							<AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA11 periph B with pullup */
-							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA12 periph B with pullup */
-							 AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA13 periph B with pullup */
-							 AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA14 periph B with pullup */
-					};
-				};
-
-				ssc0 {
-					pinctrl_ssc0_tx: ssc0_tx-0 {
-						atmel,pins =
-							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
-							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
-							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA26 periph B */
-					};
-
-					pinctrl_ssc0_rx: ssc0_rx-0 {
-						atmel,pins =
-							<AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
-							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
-							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
-					};
-				};
-
-				spi0 {
-					pinctrl_spi0: spi0-0 {
-						atmel,pins =
-							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A SPI0_MISO pin */
-							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A SPI0_MOSI pin */
-							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA13 periph A SPI0_SPCK pin */
-					};
-				};
-
-				spi1 {
-					pinctrl_spi1: spi1-0 {
-						atmel,pins =
-							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA21 periph B SPI1_MISO pin */
-							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B SPI1_MOSI pin */
-							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B SPI1_SPCK pin */
-					};
-				};
-
-				i2c0 {
-					pinctrl_i2c0: i2c0-0 {
-						atmel,pins =
-							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				i2c1 {
-					pinctrl_i2c1: i2c1-0 {
-						atmel,pins =
-							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
-							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-				};
-
-				tcb0 {
-					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
-						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
-						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
-						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
-						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
-						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
-						atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
-						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
-						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
-						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				tcb1 {
-					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
-						atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
-						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
-						atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
-						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
-						atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
-						atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
-						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
-						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
-						atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-				};
-
-				pioA: gpio@fffff400 {
-					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-					reg = <0xfffff400 0x200>;
-					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioAB_clk>;
-				};
-
-				pioB: gpio@fffff600 {
-					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-					reg = <0xfffff600 0x200>;
-					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioAB_clk>;
-				};
-
-				pioC: gpio@fffff800 {
-					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-					reg = <0xfffff800 0x200>;
-					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioCD_clk>;
-				};
-
-				pioD: gpio@fffffa00 {
-					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-					reg = <0xfffffa00 0x200>;
-					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioCD_clk>;
-				};
-			};
-
-			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
-				reg = <0xfffff200 0x200>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&mck>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			ssc0: ssc@f0010000 {
-				compatible = "atmel,at91sam9g45-ssc";
-				reg = <0xf0010000 0x4000>;
-				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
-				dmas = <&dma 0 AT91_DMA_CFG_PER_ID(21)>,
-				       <&dma 0 AT91_DMA_CFG_PER_ID(22)>;
-				dma-names = "tx", "rx";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&ssc0_clk>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			usart0: serial@f801c000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf801c000 0x4000>;
-				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart0>;
-				clocks = <&usart0_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart1: serial@f8020000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf8020000 0x4000>;
-				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart1>;
-				clocks = <&usart1_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart2: serial@f8024000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf8024000 0x4000>;
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart2>;
-				clocks = <&usart2_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart3: serial@f8028000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf8028000 0x4000>;
-				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart3>;
-				clocks = <&usart3_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			i2c0: i2c@f8010000 {
-				compatible = "atmel,at91sam9x5-i2c";
-				reg = <0xf8010000 0x100>;
-				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
-				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>,
-				       <&dma 1 AT91_DMA_CFG_PER_ID(14)>;
-				dma-names = "tx", "rx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c0>;
-				clocks = <&twi0_clk>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@f8014000 {
-				compatible = "atmel,at91sam9x5-i2c";
-				reg = <0xf8014000 0x100>;
-				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
-				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(15)>,
-				       <&dma 1 AT91_DMA_CFG_PER_ID(16)>;
-				dma-names = "tx", "rx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c1>;
-				clocks = <&twi1_clk>;
-				status = "disabled";
-			};
-
-			spi0: spi@f0000000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xf0000000 0x100>;
-				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
-				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(1)>,
-				       <&dma 1 AT91_DMA_CFG_PER_ID(2)>;
-				dma-names = "tx", "rx";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&spi0_clk>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-
-			spi1: spi@f0004000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xf0004000 0x100>;
-				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
-				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(3)>,
-				       <&dma 1 AT91_DMA_CFG_PER_ID(4)>;
-				dma-names = "tx", "rx";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi1>;
-				clocks = <&spi1_clk>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-
-			watchdog@fffffe40 {
-				compatible = "atmel,at91sam9260-wdt";
-				reg = <0xfffffe40 0x10>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
-				atmel,watchdog-type = "hardware";
-				atmel,reset-type = "all";
-				atmel,dbg-halt;
-				status = "disabled";
-			};
-
-			rtc@fffffeb0 {
-				compatible = "atmel,at91rm9200-rtc";
-				reg = <0xfffffeb0 0x40>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
-				status = "disabled";
-			};
-
-			pwm0: pwm@f8034000 {
-				compatible = "atmel,at91sam9rl-pwm";
-				reg = <0xf8034000 0x300>;
-				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
-				#pwm-cells = <3>;
-				clocks = <&pwm_clk>;
-				status = "disabled";
-			};
-
-			usb1: gadget@f803c000 {
-				compatible = "atmel,at91sam9260-udc";
-				reg = <0xf803c000 0x4000>;
-				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&udphs_clk>, <&udpck>;
-				clock-names = "pclk", "hclk";
-				status = "disabled";
-			};
-		};
-
-		usb0: ohci@00500000 {
-			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
-			reg = <0x00500000 0x00100000>;
-			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
-			clock-names = "ohci_clk", "hclk", "uhpck";
-			status = "disabled";
-		};
-
-		ebi: ebi@10000000 {
-			compatible = "atmel,at91sam9x5-ebi";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			atmel,smc = <&smc>;
-			atmel,matrix = <&matrix>;
-			reg = <0x10000000 0x60000000>;
-			ranges = <0x0 0x0 0x10000000 0x10000000
-				  0x1 0x0 0x20000000 0x10000000
-				  0x2 0x0 0x30000000 0x10000000
-				  0x3 0x0 0x40000000 0x10000000
-				  0x4 0x0 0x50000000 0x10000000
-				  0x5 0x0 0x60000000 0x10000000>;
-			clocks = <&mck>;
-			status = "disabled";
-
-			nand_controller: nand-controller {
-				compatible = "atmel,at91sam9g45-nand-controller";
-				ecc-engine = <&pmecc>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				ranges;
-				status = "disabled";
-			};
-		};
-	};
-
-	i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
-			>;
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
deleted file mode 100644
index 7768342a6638..000000000000
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ /dev/null
@@ -1,1138 +0,0 @@
-/*
- * at91sam9rl.dtsi - Device Tree Include file for AT91SAM9RL family SoC
- *
- *  Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/clock/at91.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Atmel AT91SAM9RL family SoC";
-	compatible = "atmel,at91sam9rl", "atmel,at91sam9";
-	interrupt-parent = <&aic>;
-
-	aliases {
-		serial0 = &dbgu;
-		serial1 = &usart0;
-		serial2 = &usart1;
-		serial3 = &usart2;
-		serial4 = &usart3;
-		gpio0 = &pioA;
-		gpio1 = &pioB;
-		gpio2 = &pioC;
-		gpio3 = &pioD;
-		tcb0 = &tcb0;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		ssc0 = &ssc0;
-		ssc1 = &ssc1;
-		pwm0 = &pwm0;
-	};
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-		};
-	};
-
-	memory {
-		reg = <0x20000000 0x04000000>;
-	};
-
-	clocks {
-		slow_xtal: slow_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		main_xtal: main_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		adc_op_clk: adc_op_clk{
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <1000000>;
-		};
-	};
-
-	sram: sram@00300000 {
-		compatible = "mmio-sram";
-		reg = <0x00300000 0x10000>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		fb0: fb@00500000 {
-			compatible = "atmel,at91sam9rl-lcdc";
-			reg = <0x00500000 0x1000>;
-			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_fb>;
-			clocks = <&lcd_clk>, <&lcd_clk>;
-			clock-names = "hclk", "lcdc_clk";
-			status = "disabled";
-		};
-
-		ebi: ebi@10000000 {
-			compatible = "atmel,at91sam9rl-ebi";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			atmel,smc = <&smc>;
-			atmel,matrix = <&matrix>;
-			reg = <0x10000000 0x80000000>;
-			ranges = <0x0 0x0 0x10000000 0x10000000
-				  0x1 0x0 0x20000000 0x10000000
-				  0x2 0x0 0x30000000 0x10000000
-				  0x3 0x0 0x40000000 0x10000000
-				  0x4 0x0 0x50000000 0x10000000
-				  0x5 0x0 0x60000000 0x10000000>;
-			clocks = <&mck>;
-			status = "disabled";
-
-			nand_controller: nand-controller {
-				compatible = "atmel,at91sam9g45-nand-controller";
-				#address-cells = <2>;
-				#size-cells = <1>;
-				ranges;
-				status = "disabled";
-			};
-		};
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			tcb0: timer@fffa0000 {
-				compatible = "atmel,at91rm9200-tcb";
-				reg = <0xfffa0000 0x100>;
-				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0>,
-					     <17 IRQ_TYPE_LEVEL_HIGH 0>,
-					     <18 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&clk32k>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
-			};
-
-			mmc0: mmc@fffa4000 {
-				compatible = "atmel,hsmci";
-				reg = <0xfffa4000 0x600>;
-				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pinctrl-names = "default";
-				clocks = <&mci0_clk>;
-				clock-names = "mci_clk";
-				status = "disabled";
-			};
-
-			i2c0: i2c@fffa8000 {
-				compatible = "atmel,at91sam9260-i2c";
-				reg = <0xfffa8000 0x100>;
-				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&twi0_clk>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@fffac000 {
-				compatible = "atmel,at91sam9260-i2c";
-				reg = <0xfffac000 0x100>;
-				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			usart0: serial@fffb0000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb0000 0x200>;
-				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart0>;
-				clocks = <&usart0_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart1: serial@fffb4000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb4000 0x200>;
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart1>;
-				clocks = <&usart1_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart2: serial@fffb8000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb8000 0x200>;
-				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart2>;
-				clocks = <&usart2_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart3: serial@fffbc000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffbc000 0x200>;
-				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart3>;
-				clocks = <&usart3_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			ssc0: ssc@fffc0000 {
-				compatible = "atmel,at91sam9rl-ssc";
-				reg = <0xfffc0000 0x4000>;
-				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				status = "disabled";
-			};
-
-			ssc1: ssc@fffc4000 {
-				compatible = "atmel,at91sam9rl-ssc";
-				reg = <0xfffc4000 0x4000>;
-				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
-				status = "disabled";
-			};
-
-			pwm0: pwm@fffc8000 {
-				compatible = "atmel,at91sam9rl-pwm";
-				reg = <0xfffc8000 0x300>;
-				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
-				#pwm-cells = <3>;
-				clocks = <&pwm_clk>;
-				clock-names = "pwm_clk";
-				status = "disabled";
-			};
-
-			spi0: spi@fffcc000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xfffcc000 0x200>;
-				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&spi0_clk>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-
-			adc0: adc@fffd0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91sam9rl-adc";
-				reg = <0xfffd0000 0x100>;
-				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&adc_clk>, <&adc_op_clk>;
-				clock-names = "adc_clk", "adc_op_clk";
-				atmel,adc-use-external-triggers;
-				atmel,adc-channels-used = <0x3f>;
-				atmel,adc-vref = <3300>;
-				atmel,adc-startup-time = <40>;
-				atmel,adc-res = <8 10>;
-				atmel,adc-res-names = "lowres", "highres";
-				atmel,adc-use-res = "highres";
-
-				trigger0 {
-					trigger-name = "timer-counter-0";
-					trigger-value = <0x1>;
-				};
-				trigger1 {
-					trigger-name = "timer-counter-1";
-					trigger-value = <0x3>;
-				};
-
-				trigger2 {
-					trigger-name = "timer-counter-2";
-					trigger-value = <0x5>;
-				};
-
-				trigger3 {
-					trigger-name = "external";
-					trigger-value = <0x13>;
-					trigger-external;
-				};
-			};
-
-			usb0: gadget@fffd4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91sam9rl-udc";
-				reg = <0x00600000 0x100000>,
-				      <0xfffd4000 0x4000>;
-				interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&udphs_clk>, <&utmi>;
-				clock-names = "pclk", "hclk";
-				status = "disabled";
-
-				ep@0 {
-					reg = <0>;
-					atmel,fifo-size = <64>;
-					atmel,nb-banks = <1>;
-				};
-
-				ep@1 {
-					reg = <1>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <2>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep@2 {
-					reg = <2>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <2>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep@3 {
-					reg = <3>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-				};
-
-				ep@4 {
-					reg = <4>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-				};
-
-				ep@5 {
-					reg = <5>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep@6 {
-					reg = <6>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-			};
-
-			dma0: dma-controller@ffffe600 {
-				compatible = "atmel,at91sam9rl-dma";
-				reg = <0xffffe600 0x200>;
-				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
-				#dma-cells = <2>;
-				clocks = <&dma0_clk>;
-				clock-names = "dma_clk";
-			};
-
-			ramc0: ramc@ffffea00 {
-				compatible = "atmel,at91sam9260-sdramc";
-				reg = <0xffffea00 0x200>;
-			};
-
-			smc: smc@ffffec00 {
-				compatible = "atmel,at91sam9260-smc", "syscon";
-				reg = <0xffffec00 0x200>;
-			};
-
-			matrix: matrix@ffffee00 {
-				compatible = "atmel,at91sam9rl-matrix", "syscon";
-				reg = <0xffffee00 0x200>;
-			};
-
-			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <3>;
-				compatible = "atmel,at91rm9200-aic";
-				interrupt-controller;
-				reg = <0xfffff000 0x200>;
-				atmel,external-irqs = <31>;
-			};
-
-			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
-				reg = <0xfffff200 0x200>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&mck>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			pinctrl@fffff400 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
-				ranges = <0xfffff400 0xfffff400 0x800>;
-
-				atmel,mux-mask =
-					/*    A         B     */
-					<0xffffffff 0xe05c6738>,  /* pioA */
-					<0xffffffff 0x0000c780>,  /* pioB */
-					<0xffffffff 0xe3ffff0e>,  /* pioC */
-					<0x003fffff 0x0001ff3c>;  /* pioD */
-
-				/* shared pinctrl settings */
-				adc0 {
-					pinctrl_adc0_ts: adc0_ts-0 {
-						atmel,pins =
-							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_adc0_ad0: adc0_ad0-0 {
-						atmel,pins = <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_adc0_ad1: adc0_ad1-0 {
-						atmel,pins = <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_adc0_ad2: adc0_ad2-0 {
-						atmel,pins = <AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_adc0_ad3: adc0_ad3-0 {
-						atmel,pins = <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_adc0_ad4: adc0_ad4-0 {
-						atmel,pins = <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_adc0_ad5: adc0_ad5-0 {
-						atmel,pins = <AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_adc0_adtrg: adc0_adtrg-0 {
-						atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				dbgu {
-					pinctrl_dbgu: dbgu-0 {
-						atmel,pins =
-							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				ebi {
-					pinctrl_ebi_addr_nand: ebi-addr-0 {
-						atmel,pins =
-							<AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				fb {
-					pinctrl_fb: fb-0 {
-						atmel,pins =
-							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				i2c_gpio0 {
-					pinctrl_i2c_gpio0: i2c_gpio0-0 {
-						atmel,pins =
-							<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
-							<AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
-					};
-				};
-
-				i2c_gpio1 {
-					pinctrl_i2c_gpio1: i2c_gpio1-0 {
-						atmel,pins =
-							<AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
-							<AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
-					};
-				};
-
-				mmc0 {
-					pinctrl_mmc0_clk: mmc0_clk-0 {
-						atmel,pins =
-							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-				};
-
-				nand {
-					pinctrl_nand_rb: nand-rb-0 {
-						atmel,pins =
-							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_nand_cs: nand-cs-0 {
-						atmel,pins =
-							<AT91_PIOB 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_nand_oe_we: nand-oe-we-0 {
-						atmel,pins =
-							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				pwm0 {
-					pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
-						atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
-						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
-						atmel,pins = <AT91_PIOD 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
-						atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
-						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
-						atmel,pins = <AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
-						atmel,pins = <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
-						atmel,pins = <AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm2_2: pwm0_pwm2-2 {
-						atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
-						atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
-						atmel,pins = <AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				spi0 {
-					pinctrl_spi0: spi0-0 {
-						atmel,pins =
-							<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				ssc0 {
-					pinctrl_ssc0_tx: ssc0_tx-0 {
-						atmel,pins =
-							<AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_ssc0_rx: ssc0_rx-0 {
-						atmel,pins =
-							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				ssc1 {
-					pinctrl_ssc1_tx: ssc1_tx-0 {
-						atmel,pins =
-							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_ssc1_rx: ssc1_rx-0 {
-						atmel,pins =
-							<AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE>,
-							<AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				tcb0 {
-					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
-						atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
-						atmel,pins = <AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
-						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
-						atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
-						atmel,pins = <AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
-						atmel,pins = <AT91_PIOD 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
-						atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
-						atmel,pins = <AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
-						atmel,pins = <AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				usart0 {
-					pinctrl_usart0: usart0-0 {
-						atmel,pins =
-							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_usart0_rts: usart0_rts-0 {
-						atmel,pins =
-							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart0_cts: usart0_cts-0 {
-						atmel,pins =
-							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
-						atmel,pins =
-							<AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart0_dcd: usart0_dcd-0 {
-						atmel,pins =
-							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart0_ri: usart0_ri-0 {
-						atmel,pins =
-							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart0_sck: usart0_sck-0 {
-						atmel,pins =
-							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				usart1 {
-					pinctrl_usart1: usart1-0 {
-						atmel,pins =
-							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart1_rts: usart1_rts-0 {
-						atmel,pins =
-							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart1_cts: usart1_cts-0 {
-						atmel,pins =
-							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart1_sck: usart1_sck-0 {
-						atmel,pins =
-							<AT91_PIOD 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				usart2 {
-					pinctrl_usart2: usart2-0 {
-						atmel,pins =
-							<AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart2_rts: usart2_rts-0 {
-						atmel,pins =
-							<AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart2_cts: usart2_cts-0 {
-						atmel,pins =
-							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart2_sck: usart2_sck-0 {
-						atmel,pins =
-							<AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				usart3 {
-					pinctrl_usart3: usart3-0 {
-						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart3_rts: usart3_rts-0 {
-						atmel,pins =
-							<AT91_PIOD 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart3_cts: usart3_cts-0 {
-						atmel,pins =
-							<AT91_PIOD 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_usart3_sck: usart3_sck-0 {
-						atmel,pins =
-							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-				};
-
-				pioA: gpio@fffff400 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff400 0x200>;
-					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioA_clk>;
-				};
-
-				pioB: gpio@fffff600 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff600 0x200>;
-					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioB_clk>;
-				};
-
-				pioC: gpio@fffff800 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffff800 0x200>;
-					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioC_clk>;
-				};
-
-				pioD: gpio@fffffa00 {
-					compatible = "atmel,at91rm9200-gpio";
-					reg = <0xfffffa00 0x200>;
-					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioD_clk>;
-				};
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9g45-pmc", "syscon";
-				reg = <0xfffffc00 0x100>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-
-				main: mainck {
-					compatible = "atmel,at91rm9200-clk-main";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
-					clocks = <&main_xtal>;
-				};
-
-				plla: pllack {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
-					clocks = <&main>;
-					reg = <0>;
-					atmel,clk-input-range = <1000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <3>;
-					atmel,pll-clk-output-ranges = <80000000 200000000 0>,
-								<190000000 240000000 2>;
-				};
-
-				utmi: utmick {
-					compatible = "atmel,at91sam9x5-clk-utmi";
-					#clock-cells = <0>;
-					interrupt-parent = <&pmc>;
-					interrupts = <AT91_PMC_LOCKU>;
-					clocks = <&main>;
-				};
-
-				mck: masterck {
-					compatible = "atmel,at91rm9200-clk-master";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
-					clocks = <&clk32k>, <&main>, <&plla>, <&utmi>;
-					atmel,clk-output-range = <0 94000000>;
-					atmel,clk-divisors = <1 2 4 0>;
-				};
-
-				prog: progck {
-					compatible = "atmel,at91rm9200-clk-programmable";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					interrupt-parent = <&pmc>;
-					clocks = <&clk32k>, <&main>, <&plla>, <&utmi>, <&mck>;
-
-					prog0: prog0 {
-						#clock-cells = <0>;
-						reg = <0>;
-						interrupts = <AT91_PMC_PCKRDY(0)>;
-					};
-
-					prog1: prog1 {
-						#clock-cells = <0>;
-						reg = <1>;
-						interrupts = <AT91_PMC_PCKRDY(1)>;
-					};
-				};
-
-				systemck {
-					compatible = "atmel,at91rm9200-clk-system";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					pck0: pck0 {
-						#clock-cells = <0>;
-						reg = <8>;
-						clocks = <&prog0>;
-					};
-
-					pck1: pck1 {
-						#clock-cells = <0>;
-						reg = <9>;
-						clocks = <&prog1>;
-					};
-
-				};
-
-				periphck {
-					compatible = "atmel,at91rm9200-clk-peripheral";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&mck>;
-
-					pioA_clk: pioA_clk {
-						#clock-cells = <0>;
-						reg = <2>;
-					};
-
-					pioB_clk: pioB_clk {
-						#clock-cells = <0>;
-						reg = <3>;
-					};
-
-					pioC_clk: pioC_clk {
-						#clock-cells = <0>;
-						reg = <4>;
-					};
-
-					pioD_clk: pioD_clk {
-						#clock-cells = <0>;
-						reg = <5>;
-					};
-
-					usart0_clk: usart0_clk {
-						#clock-cells = <0>;
-						reg = <6>;
-					};
-
-					usart1_clk: usart1_clk {
-						#clock-cells = <0>;
-						reg = <7>;
-					};
-
-					usart2_clk: usart2_clk {
-						#clock-cells = <0>;
-						reg = <8>;
-					};
-
-					usart3_clk: usart3_clk {
-						#clock-cells = <0>;
-						reg = <9>;
-					};
-
-					mci0_clk: mci0_clk {
-						#clock-cells = <0>;
-						reg = <10>;
-					};
-
-					twi0_clk: twi0_clk {
-						#clock-cells = <0>;
-						reg = <11>;
-					};
-
-					twi1_clk: twi1_clk {
-						#clock-cells = <0>;
-						reg = <12>;
-					};
-
-					spi0_clk: spi0_clk {
-						#clock-cells = <0>;
-						reg = <13>;
-					};
-
-					ssc0_clk: ssc0_clk {
-						#clock-cells = <0>;
-						reg = <14>;
-					};
-
-					ssc1_clk: ssc1_clk {
-						#clock-cells = <0>;
-						reg = <15>;
-					};
-
-					tc0_clk: tc0_clk {
-						#clock-cells = <0>;
-						reg = <16>;
-					};
-
-					tc1_clk: tc1_clk {
-						#clock-cells = <0>;
-						reg = <17>;
-					};
-
-					tc2_clk: tc2_clk {
-						#clock-cells = <0>;
-						reg = <18>;
-					};
-
-					pwm_clk: pwm_clk {
-						#clock-cells = <0>;
-						reg = <19>;
-					};
-
-					adc_clk: adc_clk {
-						#clock-cells = <0>;
-						reg = <20>;
-					};
-
-					dma0_clk: dma0_clk {
-						#clock-cells = <0>;
-						reg = <21>;
-					};
-
-					udphs_clk: udphs_clk {
-						#clock-cells = <0>;
-						reg = <22>;
-					};
-
-					lcd_clk: lcd_clk {
-						#clock-cells = <0>;
-						reg = <23>;
-					};
-				};
-			};
-
-			rstc@fffffd00 {
-				compatible = "atmel,at91sam9260-rstc";
-				reg = <0xfffffd00 0x10>;
-				clocks = <&clk32k>;
-			};
-
-			shdwc@fffffd10 {
-				compatible = "atmel,at91sam9260-shdwc";
-				reg = <0xfffffd10 0x10>;
-				clocks = <&clk32k>;
-			};
-
-			pit: timer@fffffd30 {
-				compatible = "atmel,at91sam9260-pit";
-				reg = <0xfffffd30 0xf>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&mck>;
-			};
-
-			watchdog@fffffd40 {
-				compatible = "atmel,at91sam9260-wdt";
-				reg = <0xfffffd40 0x10>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
-				status = "disabled";
-			};
-
-			sckc@fffffd50 {
-				compatible = "atmel,at91sam9x5-sckc";
-				reg = <0xfffffd50 0x4>;
-
-				slow_osc: slow_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-osc";
-					#clock-cells = <0>;
-					atmel,startup-time-usec = <1200000>;
-					clocks = <&slow_xtal>;
-				};
-
-				slow_rc_osc: slow_rc_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
-					#clock-cells = <0>;
-					atmel,startup-time-usec = <75>;
-					clock-frequency = <32768>;
-					clock-accuracy = <50000000>;
-				};
-
-				clk32k: slck {
-					compatible = "atmel,at91sam9x5-clk-slow";
-					#clock-cells = <0>;
-					clocks = <&slow_rc_osc &slow_osc>;
-				};
-			};
-
-			rtc@fffffd20 {
-				compatible = "atmel,at91sam9260-rtt";
-				reg = <0xfffffd20 0x10>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
-				status = "disabled";
-			};
-
-			gpbr: syscon@fffffd60 {
-				compatible = "atmel,at91sam9260-gpbr", "syscon";
-				reg = <0xfffffd60 0x10>;
-				status = "disabled";
-			};
-
-			rtc@fffffe00 {
-				compatible = "atmel,at91rm9200-rtc";
-				reg = <0xfffffe00 0x40>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
-				status = "disabled";
-			};
-
-		};
-	};
-
-	i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */
-			<&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c_gpio0>;
-		status = "disabled";
-	};
-
-	i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */
-			<&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c_gpio1>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts
deleted file mode 100644
index 494864836e83..000000000000
--- a/arch/arm/boot/dts/at91sam9x25ek.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * at91sam9x25ek.dts - Device Tree file for AT91SAM9X25-EK board
- *
- *  Copyright (C) 2012 Atmel,
- *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-/dts-v1/;
-#include "at91sam9x25.dtsi"
-#include "at91sam9x5ek.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9X25-EK";
-	compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	ahb {
-		apb {
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			macb1: ethernet@f8030000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts
deleted file mode 100644
index fcb67180ea26..000000000000
--- a/arch/arm/boot/dts/at91sam9x35ek.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * at91sam9x35ek.dts - Device Tree file for AT91SAM9X35-EK board
- *
- *  Copyright (C) 2012 Atmel,
- *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-/dts-v1/;
-#include "at91sam9x35.dtsi"
-#include "at91sam9x5dm.dtsi"
-#include "at91sam9x5ek.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9X35-EK";
-	compatible = "atmel,at91sam9x35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	ahb {
-		apb {
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-			hlcdc: hlcdc@f8038000 {
-				status = "okay";
-			};
-		};
-	};
-
-	backlight: backlight {
-		status = "okay";
-	};
-
-	bl_reg: backlight_regulator {
-		status = "okay";
-	};
-
-	panel: panel {
-		status = "okay";
-	};
-
-	panel_reg: panel_regulator {
-		status = "okay";
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
deleted file mode 100644
index 57f307541d2e..000000000000
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ /dev/null
@@ -1,1323 +0,0 @@
-/*
- * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
- *                   applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35,
- *                   AT91SAM9X25, AT91SAM9X35 SoC
- *
- *  Copyright (C) 2012 Atmel,
- *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/dma/at91.h>
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/at91.h>
-
-/ {
-	model = "Atmel AT91SAM9x5 family SoC";
-	compatible = "atmel,at91sam9x5";
-	interrupt-parent = <&aic>;
-
-	aliases {
-		serial0 = &dbgu;
-		serial1 = &usart0;
-		serial2 = &usart1;
-		serial3 = &usart2;
-		gpio0 = &pioA;
-		gpio1 = &pioB;
-		gpio2 = &pioC;
-		gpio3 = &pioD;
-		tcb0 = &tcb0;
-		tcb1 = &tcb1;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		ssc0 = &ssc0;
-		pwm0 = &pwm0;
-	};
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-		};
-	};
-
-	memory {
-		reg = <0x20000000 0x10000000>;
-	};
-
-	clocks {
-		slow_xtal: slow_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		main_xtal: main_xtal {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		adc_op_clk: adc_op_clk{
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <1000000>;
-		};
-	};
-
-	sram: sram@00300000 {
-		compatible = "mmio-sram";
-		reg = <0x00300000 0x8000>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <3>;
-				compatible = "atmel,at91rm9200-aic";
-				interrupt-controller;
-				reg = <0xfffff000 0x200>;
-				atmel,external-irqs = <31>;
-			};
-
-			matrix: matrix@ffffde00 {
-				compatible = "atmel,at91sam9x5-matrix", "syscon";
-				reg = <0xffffde00 0x100>;
-			};
-
-			pmecc: ecc-engine@ffffe000 {
-				compatible = "atmel,at91sam9g45-pmecc";
-				reg = <0xffffe000 0x600>,
-				      <0xffffe600 0x200>;
-			};
-
-			ramc0: ramc@ffffe800 {
-				compatible = "atmel,at91sam9g45-ddramc";
-				reg = <0xffffe800 0x200>;
-				clocks = <&ddrck>;
-				clock-names = "ddrck";
-			};
-
-			smc: smc@ffffea00 {
-				compatible = "atmel,at91sam9260-smc", "syscon";
-				reg = <0xffffea00 0x200>;
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9x5-pmc", "syscon";
-				reg = <0xfffffc00 0x200>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-
-				main_rc_osc: main_rc_osc {
-					compatible = "atmel,at91sam9x5-clk-main-rc-osc";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCRCS>;
-					clock-frequency = <12000000>;
-					clock-accuracy = <50000000>;
-				};
-
-				main_osc: main_osc {
-					compatible = "atmel,at91rm9200-clk-main-osc";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
-					clocks = <&main_xtal>;
-				};
-
-				main: mainck {
-					compatible = "atmel,at91sam9x5-clk-main";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCSELS>;
-					clocks = <&main_rc_osc>, <&main_osc>;
-				};
-
-				plla: pllack {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
-					clocks = <&main>;
-					reg = <0>;
-					atmel,clk-input-range = <2000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <745000000 800000000 0 0
-								       695000000 750000000 1 0
-								       645000000 700000000 2 0
-								       595000000 650000000 3 0
-								       545000000 600000000 0 1
-								       495000000 555000000 1 1
-								       445000000 500000000 2 1
-								       400000000 450000000 3 1>;
-				};
-
-				plladiv: plladivck {
-					compatible = "atmel,at91sam9x5-clk-plldiv";
-					#clock-cells = <0>;
-					clocks = <&plla>;
-				};
-
-				utmi: utmick {
-					compatible = "atmel,at91sam9x5-clk-utmi";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKU>;
-					clocks = <&main>;
-				};
-
-				mck: masterck {
-					compatible = "atmel,at91sam9x5-clk-master";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
-					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
-					atmel,clk-output-range = <0 133333333>;
-					atmel,clk-divisors = <1 2 4 3>;
-					atmel,master-clk-have-div3-pres;
-				};
-
-				usb: usbck {
-					compatible = "atmel,at91sam9x5-clk-usb";
-					#clock-cells = <0>;
-					clocks = <&plladiv>, <&utmi>;
-				};
-
-				prog: progck {
-					compatible = "atmel,at91sam9x5-clk-programmable";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					interrupt-parent = <&pmc>;
-					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
-
-					prog0: prog0 {
-						#clock-cells = <0>;
-						reg = <0>;
-						interrupts = <AT91_PMC_PCKRDY(0)>;
-					};
-
-					prog1: prog1 {
-						#clock-cells = <0>;
-						reg = <1>;
-						interrupts = <AT91_PMC_PCKRDY(1)>;
-					};
-				};
-
-				smd: smdclk {
-					compatible = "atmel,at91sam9x5-clk-smd";
-					#clock-cells = <0>;
-					clocks = <&plladiv>, <&utmi>;
-				};
-
-				systemck {
-					compatible = "atmel,at91rm9200-clk-system";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					ddrck: ddrck {
-						#clock-cells = <0>;
-						reg = <2>;
-						clocks = <&mck>;
-					};
-
-					smdck: smdck {
-						#clock-cells = <0>;
-						reg = <4>;
-						clocks = <&smd>;
-					};
-
-					uhpck: uhpck {
-						#clock-cells = <0>;
-						reg = <6>;
-						clocks = <&usb>;
-					};
-
-					udpck: udpck {
-						#clock-cells = <0>;
-						reg = <7>;
-						clocks = <&usb>;
-					};
-
-					pck0: pck0 {
-						#clock-cells = <0>;
-						reg = <8>;
-						clocks = <&prog0>;
-					};
-
-					pck1: pck1 {
-						#clock-cells = <0>;
-						reg = <9>;
-						clocks = <&prog1>;
-					};
-				};
-
-				periphck {
-					compatible = "atmel,at91sam9x5-clk-peripheral";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&mck>;
-
-					pioAB_clk: pioAB_clk {
-						#clock-cells = <0>;
-						reg = <2>;
-					};
-
-					pioCD_clk: pioCD_clk {
-						#clock-cells = <0>;
-						reg = <3>;
-					};
-
-					smd_clk: smd_clk {
-						#clock-cells = <0>;
-						reg = <4>;
-					};
-
-					usart0_clk: usart0_clk {
-						#clock-cells = <0>;
-						reg = <5>;
-					};
-
-					usart1_clk: usart1_clk {
-						#clock-cells = <0>;
-						reg = <6>;
-					};
-
-					usart2_clk: usart2_clk {
-						#clock-cells = <0>;
-						reg = <7>;
-					};
-
-					twi0_clk: twi0_clk {
-						reg = <9>;
-						#clock-cells = <0>;
-					};
-
-					twi1_clk: twi1_clk {
-						#clock-cells = <0>;
-						reg = <10>;
-					};
-
-					twi2_clk: twi2_clk {
-						#clock-cells = <0>;
-						reg = <11>;
-					};
-
-					mci0_clk: mci0_clk {
-						#clock-cells = <0>;
-						reg = <12>;
-					};
-
-					spi0_clk: spi0_clk {
-						#clock-cells = <0>;
-						reg = <13>;
-					};
-
-					spi1_clk: spi1_clk {
-						#clock-cells = <0>;
-						reg = <14>;
-					};
-
-					uart0_clk: uart0_clk {
-						#clock-cells = <0>;
-						reg = <15>;
-					};
-
-					uart1_clk: uart1_clk {
-						#clock-cells = <0>;
-						reg = <16>;
-					};
-
-					tcb0_clk: tcb0_clk {
-						#clock-cells = <0>;
-						reg = <17>;
-					};
-
-					pwm_clk: pwm_clk {
-						#clock-cells = <0>;
-						reg = <18>;
-					};
-
-					adc_clk: adc_clk {
-						#clock-cells = <0>;
-						reg = <19>;
-					};
-
-					dma0_clk: dma0_clk {
-						#clock-cells = <0>;
-						reg = <20>;
-					};
-
-					dma1_clk: dma1_clk {
-						#clock-cells = <0>;
-						reg = <21>;
-					};
-
-					uhphs_clk: uhphs_clk {
-						#clock-cells = <0>;
-						reg = <22>;
-					};
-
-					udphs_clk: udphs_clk {
-						#clock-cells = <0>;
-						reg = <23>;
-					};
-
-					mci1_clk: mci1_clk {
-						#clock-cells = <0>;
-						reg = <26>;
-					};
-
-					ssc0_clk: ssc0_clk {
-						#clock-cells = <0>;
-						reg = <28>;
-					};
-				};
-			};
-
-			rstc@fffffe00 {
-				compatible = "atmel,at91sam9g45-rstc";
-				reg = <0xfffffe00 0x10>;
-				clocks = <&clk32k>;
-			};
-
-			shdwc@fffffe10 {
-				compatible = "atmel,at91sam9x5-shdwc";
-				reg = <0xfffffe10 0x10>;
-				clocks = <&clk32k>;
-			};
-
-			pit: timer@fffffe30 {
-				compatible = "atmel,at91sam9260-pit";
-				reg = <0xfffffe30 0xf>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&mck>;
-			};
-
-			sckc@fffffe50 {
-				compatible = "atmel,at91sam9x5-sckc";
-				reg = <0xfffffe50 0x4>;
-
-				slow_osc: slow_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-osc";
-					#clock-cells = <0>;
-					clocks = <&slow_xtal>;
-				};
-
-				slow_rc_osc: slow_rc_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
-					#clock-cells = <0>;
-					clock-frequency = <32768>;
-					clock-accuracy = <50000000>;
-				};
-
-				clk32k: slck {
-					compatible = "atmel,at91sam9x5-clk-slow";
-					#clock-cells = <0>;
-					clocks = <&slow_rc_osc>, <&slow_osc>;
-				};
-			};
-
-			tcb0: timer@f8008000 {
-				compatible = "atmel,at91sam9x5-tcb";
-				reg = <0xf8008000 0x100>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>, <&clk32k>;
-				clock-names = "t0_clk", "slow_clk";
-			};
-
-			tcb1: timer@f800c000 {
-				compatible = "atmel,at91sam9x5-tcb";
-				reg = <0xf800c000 0x100>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>, <&clk32k>;
-				clock-names = "t0_clk", "slow_clk";
-			};
-
-			dma0: dma-controller@ffffec00 {
-				compatible = "atmel,at91sam9g45-dma";
-				reg = <0xffffec00 0x200>;
-				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
-				#dma-cells = <2>;
-				clocks = <&dma0_clk>;
-				clock-names = "dma_clk";
-			};
-
-			dma1: dma-controller@ffffee00 {
-				compatible = "atmel,at91sam9g45-dma";
-				reg = <0xffffee00 0x200>;
-				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
-				#dma-cells = <2>;
-				clocks = <&dma1_clk>;
-				clock-names = "dma_clk";
-			};
-
-			pinctrl@fffff400 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
-				ranges = <0xfffff400 0xfffff400 0x800>;
-
-				/* shared pinctrl settings */
-				dbgu {
-					pinctrl_dbgu: dbgu-0 {
-						atmel,pins =
-							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				ebi {
-					pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
-						atmel,pins =
-							<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_ebi_data_8_15: ebi-data-msb-0 {
-						atmel,pins =
-							<AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_ebi_addr_nand: ebi-addr-0 {
-						atmel,pins =
-							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				usart0 {
-					pinctrl_usart0: usart0-0 {
-						atmel,pins =
-							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA0 periph A with pullup */
-							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA1 periph A */
-					};
-
-					pinctrl_usart0_rts: usart0_rts-0 {
-						atmel,pins =
-							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A */
-					};
-
-					pinctrl_usart0_cts: usart0_cts-0 {
-						atmel,pins =
-							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA3 periph A */
-					};
-
-					pinctrl_usart0_sck: usart0_sck-0 {
-						atmel,pins =
-							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA4 periph A */
-					};
-				};
-
-				usart1 {
-					pinctrl_usart1: usart1-0 {
-						atmel,pins =
-							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA5 periph A with pullup */
-							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA6 periph A */
-					};
-
-					pinctrl_usart1_rts: usart1_rts-0 {
-						atmel,pins =
-							<AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC27 periph C */
-					};
-
-					pinctrl_usart1_cts: usart1_cts-0 {
-						atmel,pins =
-							<AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC28 periph C */
-					};
-
-					pinctrl_usart1_sck: usart1_sck-0 {
-						atmel,pins =
-							<AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC29 periph C */
-					};
-				};
-
-				usart2 {
-					pinctrl_usart2: usart2-0 {
-						atmel,pins =
-							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
-							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA8 periph A */
-					};
-
-					pinctrl_usart2_rts: usart2_rts-0 {
-						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
-					};
-
-					pinctrl_usart2_cts: usart2_cts-0 {
-						atmel,pins =
-							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
-					};
-
-					pinctrl_usart2_sck: usart2_sck-0 {
-						atmel,pins =
-							<AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB2 periph B */
-					};
-				};
-
-				uart0 {
-					pinctrl_uart0: uart0-0 {
-						atmel,pins =
-							<AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC8 periph C */
-							 AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;	/* PC9 periph C with pullup */
-					};
-				};
-
-				uart1 {
-					pinctrl_uart1: uart1-0 {
-						atmel,pins =
-							<AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC16 periph C */
-							 AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;	/* PC17 periph C with pullup */
-					};
-				};
-
-				nand {
-					pinctrl_nand_oe_we: nand-oe-we-0 {
-						atmel,pins =
-							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE
-							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_nand_rb: nand-rb-0 {
-						atmel,pins =
-							<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-
-					pinctrl_nand_cs: nand-cs-0 {
-						atmel,pins =
-							<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
-					};
-				};
-
-				mmc0 {
-					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
-							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA16 periph A with pullup */
-							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA15 periph A with pullup */
-					};
-
-					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA18 periph A with pullup */
-							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA19 periph A with pullup */
-							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA20 periph A with pullup */
-					};
-				};
-
-				mmc1 {
-					pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
-						atmel,pins =
-							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA13 periph B */
-							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA12 periph B with pullup */
-							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA11 periph B with pullup */
-					};
-
-					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
-						atmel,pins =
-							<AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA2 periph B with pullup */
-							 AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA3 periph B with pullup */
-							 AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA4 periph B with pullup */
-					};
-				};
-
-				ssc0 {
-					pinctrl_ssc0_tx: ssc0_tx-0 {
-						atmel,pins =
-							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
-							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
-							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA26 periph B */
-					};
-
-					pinctrl_ssc0_rx: ssc0_rx-0 {
-						atmel,pins =
-							<AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
-							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
-							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
-					};
-				};
-
-				spi0 {
-					pinctrl_spi0: spi0-0 {
-						atmel,pins =
-							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A SPI0_MISO pin */
-							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A SPI0_MOSI pin */
-							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA13 periph A SPI0_SPCK pin */
-					};
-				};
-
-				spi1 {
-					pinctrl_spi1: spi1-0 {
-						atmel,pins =
-							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA21 periph B SPI1_MISO pin */
-							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B SPI1_MOSI pin */
-							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B SPI1_SPCK pin */
-					};
-				};
-
-				i2c0 {
-					pinctrl_i2c0: i2c0-0 {
-						atmel,pins =
-							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA30 periph A I2C0 data */
-							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA31 periph A I2C0 clock */
-					};
-				};
-
-				i2c1 {
-					pinctrl_i2c1: i2c1-0 {
-						atmel,pins =
-							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC0 periph C I2C1 data */
-							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC1 periph C I2C1 clock */
-					};
-				};
-
-				i2c2 {
-					pinctrl_i2c2: i2c2-0 {
-						atmel,pins =
-							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB4 periph B I2C2 data */
-							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB5 periph B I2C2 clock */
-					};
-				};
-
-				i2c_gpio0 {
-					pinctrl_i2c_gpio0: i2c_gpio0-0 {
-						atmel,pins =
-							<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PA30 gpio multidrive I2C0 data */
-							 AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PA31 gpio multidrive I2C0 clock */
-					};
-				};
-
-				i2c_gpio1 {
-					pinctrl_i2c_gpio1: i2c_gpio1-0 {
-						atmel,pins =
-							<AT91_PIOC 0 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PC0 gpio multidrive I2C1 data */
-							 AT91_PIOC 1 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PC1 gpio multidrive I2C1 clock */
-					};
-				};
-
-				i2c_gpio2 {
-					pinctrl_i2c_gpio2: i2c_gpio2-0 {
-						atmel,pins =
-							<AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PB4 gpio multidrive I2C2 data */
-							 AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PB5 gpio multidrive I2C2 clock */
-					};
-				};
-
-				pwm0 {
-					pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
-						atmel,pins =
-							<AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-					pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
-						atmel,pins =
-							<AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-					pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
-						atmel,pins =
-							<AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
-						atmel,pins =
-							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-					pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
-						atmel,pins =
-							<AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-					pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
-						atmel,pins =
-							<AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
-						atmel,pins =
-							<AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-					pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
-						atmel,pins =
-							<AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
-						atmel,pins =
-							<AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
-					};
-					pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
-						atmel,pins =
-							<AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-				};
-
-				tcb0 {
-					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
-						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
-						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
-						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
-						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
-						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
-						atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
-						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
-						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
-						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
-				};
-
-				tcb1 {
-					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
-						atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
-						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
-						atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
-						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
-						atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
-						atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
-						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
-						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
-						atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
-					};
-				};
-
-				pioA: gpio@fffff400 {
-					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-					reg = <0xfffff400 0x200>;
-					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioAB_clk>;
-				};
-
-				pioB: gpio@fffff600 {
-					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-					reg = <0xfffff600 0x200>;
-					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					#gpio-lines = <19>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioAB_clk>;
-				};
-
-				pioC: gpio@fffff800 {
-					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-					reg = <0xfffff800 0x200>;
-					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioCD_clk>;
-				};
-
-				pioD: gpio@fffffa00 {
-					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-					reg = <0xfffffa00 0x200>;
-					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
-					#gpio-cells = <2>;
-					gpio-controller;
-					#gpio-lines = <22>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					clocks = <&pioCD_clk>;
-				};
-			};
-
-			ssc0: ssc@f0010000 {
-				compatible = "atmel,at91sam9g45-ssc";
-				reg = <0xf0010000 0x4000>;
-				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
-				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>,
-				       <&dma0 1 AT91_DMA_CFG_PER_ID(14)>;
-				dma-names = "tx", "rx";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&ssc0_clk>;
-				clock-names = "pclk";
-				status = "disabled";
-			};
-
-			mmc0: mmc@f0008000 {
-				compatible = "atmel,hsmci";
-				reg = <0xf0008000 0x600>;
-				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
-				dma-names = "rxtx";
-				pinctrl-names = "default";
-				clocks = <&mci0_clk>;
-				clock-names = "mci_clk";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			mmc1: mmc@f000c000 {
-				compatible = "atmel,hsmci";
-				reg = <0xf000c000 0x600>;
-				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
-				dma-names = "rxtx";
-				pinctrl-names = "default";
-				clocks = <&mci1_clk>;
-				clock-names = "mci_clk";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
-				reg = <0xfffff200 0x200>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_dbgu>;
-				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>,
-				       <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
-				dma-names = "tx", "rx";
-				clocks = <&mck>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart0: serial@f801c000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf801c000 0x200>;
-				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart0>;
-				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>,
-				       <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
-				dma-names = "tx", "rx";
-				clocks = <&usart0_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart1: serial@f8020000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf8020000 0x200>;
-				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart1>;
-				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>,
-				       <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
-				dma-names = "tx", "rx";
-				clocks = <&usart1_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			usart2: serial@f8024000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf8024000 0x200>;
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart2>;
-				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>,
-				       <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
-				dma-names = "tx", "rx";
-				clocks = <&usart2_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			i2c0: i2c@f8010000 {
-				compatible = "atmel,at91sam9x5-i2c";
-				reg = <0xf8010000 0x100>;
-				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
-				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>,
-				       <&dma0 1 AT91_DMA_CFG_PER_ID(8)>;
-				dma-names = "tx", "rx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c0>;
-				clocks = <&twi0_clk>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@f8014000 {
-				compatible = "atmel,at91sam9x5-i2c";
-				reg = <0xf8014000 0x100>;
-				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
-				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>,
-				       <&dma1 1 AT91_DMA_CFG_PER_ID(6)>;
-				dma-names = "tx", "rx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c1>;
-				clocks = <&twi1_clk>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@f8018000 {
-				compatible = "atmel,at91sam9x5-i2c";
-				reg = <0xf8018000 0x100>;
-				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
-				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>,
-				       <&dma0 1 AT91_DMA_CFG_PER_ID(10)>;
-				dma-names = "tx", "rx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c2>;
-				clocks = <&twi2_clk>;
-				status = "disabled";
-			};
-
-			uart0: serial@f8040000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf8040000 0x200>;
-				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart0>;
-				clocks = <&uart0_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			uart1: serial@f8044000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf8044000 0x200>;
-				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart1>;
-				clocks = <&uart1_clk>;
-				clock-names = "usart";
-				status = "disabled";
-			};
-
-			adc0: adc@f804c000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91sam9x5-adc";
-				reg = <0xf804c000 0x100>;
-				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&adc_clk>,
-					 <&adc_op_clk>;
-				clock-names = "adc_clk", "adc_op_clk";
-				atmel,adc-use-external-triggers;
-				atmel,adc-channels-used = <0xffff>;
-				atmel,adc-vref = <3300>;
-				atmel,adc-startup-time = <40>;
-				atmel,adc-sample-hold-time = <11>;
-				atmel,adc-res = <8 10>;
-				atmel,adc-res-names = "lowres", "highres";
-				atmel,adc-use-res = "highres";
-
-				trigger0 {
-					trigger-name = "external-rising";
-					trigger-value = <0x1>;
-					trigger-external;
-				};
-
-				trigger1 {
-					trigger-name = "external-falling";
-					trigger-value = <0x2>;
-					trigger-external;
-				};
-
-				trigger2 {
-					trigger-name = "external-any";
-					trigger-value = <0x3>;
-					trigger-external;
-				};
-
-				trigger3 {
-					trigger-name = "continuous";
-					trigger-value = <0x6>;
-				};
-			};
-
-			spi0: spi@f0000000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xf0000000 0x100>;
-				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
-				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(1)>,
-				       <&dma0 1 AT91_DMA_CFG_PER_ID(2)>;
-				dma-names = "tx", "rx";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&spi0_clk>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-
-			spi1: spi@f0004000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xf0004000 0x100>;
-				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
-				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(1)>,
-				       <&dma1 1 AT91_DMA_CFG_PER_ID(2)>;
-				dma-names = "tx", "rx";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi1>;
-				clocks = <&spi1_clk>;
-				clock-names = "spi_clk";
-				status = "disabled";
-			};
-
-			usb2: gadget@f803c000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91sam9g45-udc";
-				reg = <0x00500000 0x80000
-				       0xf803c000 0x400>;
-				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&utmi>, <&udphs_clk>;
-				clock-names = "hclk", "pclk";
-				status = "disabled";
-
-				ep@0 {
-					reg = <0>;
-					atmel,fifo-size = <64>;
-					atmel,nb-banks = <1>;
-				};
-
-				ep@1 {
-					reg = <1>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <2>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep@2 {
-					reg = <2>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <2>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep@3 {
-					reg = <3>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-				};
-
-				ep@4 {
-					reg = <4>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-				};
-
-				ep@5 {
-					reg = <5>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep@6 {
-					reg = <6>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-			};
-
-			watchdog@fffffe40 {
-				compatible = "atmel,at91sam9260-wdt";
-				reg = <0xfffffe40 0x10>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
-				atmel,watchdog-type = "hardware";
-				atmel,reset-type = "all";
-				atmel,dbg-halt;
-				status = "disabled";
-			};
-
-			rtc@fffffeb0 {
-				compatible = "atmel,at91sam9x5-rtc";
-				reg = <0xfffffeb0 0x40>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
-				status = "disabled";
-			};
-
-			pwm0: pwm@f8034000 {
-				compatible = "atmel,at91sam9rl-pwm";
-				reg = <0xf8034000 0x300>;
-				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
-				clocks = <&pwm_clk>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-		};
-
-		usb0: ohci@00600000 {
-			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
-			reg = <0x00600000 0x100000>;
-			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
-			clock-names = "ohci_clk", "hclk", "uhpck";
-			status = "disabled";
-		};
-
-		usb1: ehci@00700000 {
-			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
-			reg = <0x00700000 0x100000>;
-			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&utmi>, <&uhphs_clk>;
-			clock-names = "usb_clk", "ehci_clk";
-			status = "disabled";
-		};
-
-		ebi: ebi@10000000 {
-			compatible = "atmel,at91sam9x5-ebi";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			atmel,smc = <&smc>;
-			atmel,matrix = <&matrix>;
-			reg = <0x10000000 0x60000000>;
-			ranges = <0x0 0x0 0x10000000 0x10000000
-				  0x1 0x0 0x20000000 0x10000000
-				  0x2 0x0 0x30000000 0x10000000
-				  0x3 0x0 0x40000000 0x10000000
-				  0x4 0x0 0x50000000 0x10000000
-				  0x5 0x0 0x60000000 0x10000000>;
-			clocks = <&mck>;
-			status = "disabled";
-
-			nand_controller: nand-controller {
-				compatible = "atmel,at91sam9g45-nand-controller";
-				ecc-engine = <&pmecc>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				ranges;
-				status = "disabled";
-			};
-		};
-	};
-
-	i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
-			>;
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c_gpio0>;
-		status = "disabled";
-	};
-
-	i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
-			 &pioC 1 GPIO_ACTIVE_HIGH /* scl */
-			>;
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c_gpio1>;
-		status = "disabled";
-	};
-
-	i2c-gpio-2 {
-		compatible = "i2c-gpio";
-		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
-			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
-			>;
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c_gpio2>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
deleted file mode 100644
index 1629db9dd563..000000000000
--- a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * at91sam9x5_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
- * LCD controller.
- *
- * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2.
- */
-
-#include <dt-bindings/pinctrl/at91.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	ahb {
-		apb {
-			hlcdc: hlcdc@f8038000 {
-				compatible = "atmel,at91sam9x5-hlcdc";
-				reg = <0xf8038000 0x4000>;
-				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
-				clock-names = "periph_clk","sys_clk", "slow_clk";
-				status = "disabled";
-
-				hlcdc-display-controller {
-					compatible = "atmel,hlcdc-display-controller";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						#address-cells = <1>;
-						#size-cells = <0>;
-						reg = <0>;
-					};
-				};
-
-				hlcdc_pwm: hlcdc-pwm {
-					compatible = "atmel,hlcdc-pwm";
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_lcd_pwm>;
-					#pwm-cells = <3>;
-				};
-			};
-
-			pinctrl@fffff400 {
-				lcd {
-					pinctrl_lcd_base: lcd-base-0 {
-						atmel,pins =
-							<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
-							 AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
-							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
-							 AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
-							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
-					};
-
-					pinctrl_lcd_pwm: lcd-pwm-0 {
-						atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
-					};
-
-					pinctrl_lcd_rgb444: lcd-rgb-0 {
-						atmel,pins =
-							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
-							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
-							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
-							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
-							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
-							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
-							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
-							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
-							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
-							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
-							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
-							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD11 pin */
-					};
-
-					pinctrl_lcd_rgb565: lcd-rgb-1 {
-						atmel,pins =
-							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
-							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
-							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
-							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
-							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
-							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
-							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
-							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
-							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
-							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
-							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
-							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
-							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
-							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
-							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
-							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD15 pin */
-					};
-
-					pinctrl_lcd_rgb666: lcd-rgb-2 {
-						atmel,pins =
-							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
-							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
-							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
-							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
-							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
-							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
-							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
-							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
-							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
-							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
-							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
-							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
-							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
-							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
-							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
-							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
-							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
-							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD17 pin */
-					};
-
-					pinctrl_lcd_rgb888: lcd-rgb-3 {
-						atmel,pins =
-							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
-							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
-							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
-							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
-							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
-							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
-							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
-							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
-							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
-							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
-							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
-							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
-							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
-							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
-							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
-							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
-							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
-							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
-							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
-							 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
-							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
-							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
-							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
-							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
-					};
-				};
-			};
-
-			pmc: pmc@fffffc00 {
-				periphck {
-					lcdc_clk: lcdc_clk {
-						#clock-cells = <0>;
-						reg = <25>;
-					};
-				};
-
-				systemck {
-					lcdck: lcdck {
-						#clock-cells = <0>;
-						reg = <3>;
-						clocks = <&mck>;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9x5dm.dtsi b/arch/arm/boot/dts/at91sam9x5dm.dtsi
deleted file mode 100644
index 34c089fe0bc0..000000000000
--- a/arch/arm/boot/dts/at91sam9x5dm.dtsi
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * at91sam9x5dm.dtsi - Device Tree file for SAM9x5 display module
- *
- *  Copyright (C) 2014 Atmel,
- *                2014 Free Electrons
- *
- *  Author: Boris Brezillon <boris.brezillon@free-electrons.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-/ {
-	ahb {
-		apb {
-			i2c0: i2c@f8010000 {
-				qt1070: keyboard@1b {
-					compatible = "qt1070";
-					reg = <0x1b>;
-					interrupt-parent = <&pioA>;
-					interrupts = <7 0x0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_qt1070_irq>;
-					wakeup-source;
-				};
-			};
-
-			hlcdc: hlcdc@f8038000 {
-				hlcdc-display-controller {
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
-
-					port@0 {
-						hlcdc_panel_output: endpoint@0 {
-							reg = <0>;
-							remote-endpoint = <&panel_input>;
-						};
-					};
-				};
-			};
-
-			adc0: adc@f804c000 {
-				atmel,adc-ts-wires = <4>;
-				atmel,adc-ts-pressure-threshold = <10000>;
-				status = "okay";
-			};
-
-			pinctrl@fffff400 {
-				board {
-					pinctrl_qt1070_irq: qt1070_irq {
-						atmel,pins =
-							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-				};
-			};
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&hlcdc_pwm 0 50000 0>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		power-supply = <&bl_reg>;
-		status = "disabled";
-	};
-
-	bl_reg: backlight_regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "backlight-power-supply";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		status = "disabled";
-	};
-
-	panel: panel {
-		compatible = "foxlink,fl500wvr00-a0t", "simple-panel";
-		backlight = <&backlight>;
-		power-supply = <&panel_reg>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-
-		port@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			panel_input: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&hlcdc_panel_output>;
-			};
-		};
-	};
-
-	panel_reg: panel_regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "panel-power-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
deleted file mode 100644
index 9d2bbc41a7b0..000000000000
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
- *
- *  Copyright (C) 2012 Atmel,
- *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-#include "at91sam9x5cm.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9X5-EK";
-	compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
-		stdout-path = "serial0:115200n8";
-	};
-
-	ahb {
-		apb {
-			mmc0: mmc@f0008000 {
-				pinctrl-0 = <
-					&pinctrl_board_mmc0
-					&pinctrl_mmc0_slot0_clk_cmd_dat0
-					&pinctrl_mmc0_slot0_dat1_3>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			mmc1: mmc@f000c000 {
-				pinctrl-0 = <
-					&pinctrl_board_mmc1
-					&pinctrl_mmc1_slot0_clk_cmd_dat0
-					&pinctrl_mmc1_slot0_dat1_3>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			usart0: serial@f801c000 {
-				status = "okay";
-			};
-
-			usb2: gadget@f803c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_board_usb2>;
-				atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-
-			i2c0: i2c@f8010000 {
-				status = "okay";
-
-				wm8731: wm8731@1a {
-					compatible = "wm8731";
-					reg = <0x1a>;
-				};
-			};
-
-			adc0: adc@f804c000 {
-				atmel,adc-ts-wires = <4>;
-				atmel,adc-ts-pressure-threshold = <10000>;
-				status = "okay";
-			};
-
-			pinctrl@fffff400 {
-				camera_sensor {
-					pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
-						atmel,pins =
-							<AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_MCK */
-					};
-
-					pinctrl_sensor_power: sensor_power-0 {
-						atmel,pins =
-							<AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_sensor_reset: sensor_reset-0 {
-						atmel,pins =
-							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-				};
-
-				mmc0 {
-					pinctrl_board_mmc0: mmc0-board {
-						atmel,pins =
-							<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
-					};
-				};
-
-				mmc1 {
-					pinctrl_board_mmc1: mmc1-board {
-						atmel,pins =
-							<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD14 gpio CD pin pull up and deglitch */
-					};
-				};
-
-				usb2 {
-					pinctrl_board_usb2: usb2-board {
-						atmel,pins =
-							<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB16 gpio vbus sense, deglitch */
-					};
-				};
-			};
-
-			spi0: spi@f0000000 {
-				status = "disabled"; /* conflicts with mmc1 */
-				cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
-				m25p80@0 {
-					compatible = "atmel,at25df321a";
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-				};
-			};
-
-			watchdog@fffffe40 {
-				status = "okay";
-			};
-
-			ssc0: ssc@f0010000 {
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@00600000 {
-			status = "okay";
-			num-ports = <3>;
-			atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
-					   &pioD 19 GPIO_ACTIVE_LOW
-					   &pioD 20 GPIO_ACTIVE_LOW
-					  >;
-		};
-
-		usb1: ehci@00700000 {
-			status = "okay";
-		};
-	};
-
-	sound {
-		compatible = "atmel,sam9x5-wm8731-audio";
-
-		atmel,model = "wm8731 @ AT91SAM9X5EK";
-
-		atmel,audio-routing =
-			"Headphone Jack", "RHPOUT",
-			"Headphone Jack", "LHPOUT",
-			"LLINEIN", "Line In Jack",
-			"RLINEIN", "Line In Jack";
-
-		atmel,ssc-controller = <&ssc0>;
-		atmel,audio-codec = <&wm8731>;
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9xe.dtsi b/arch/arm/boot/dts/at91sam9xe.dtsi
deleted file mode 100644
index 0278f63b2daf..000000000000
--- a/arch/arm/boot/dts/at91sam9xe.dtsi
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * at91sam9xe.dtsi - Device Tree Include file for AT91SAM9XE family SoC
- *
- *  Copyright (C) 2015 Atmel,
- *                2015 Alexandre Belloni <alexandre.Belloni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "at91sam9260.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9XE family SoC";
-	compatible = "atmel,at91sam9xe", "atmel,at91sam9260";
-
-	sram0: sram@002ff000 {
-		status = "disabled";
-	};
-
-	sram1: sram@00300000 {
-		compatible = "mmio-sram";
-		reg = <0x00300000 0x4000>;
-	};
-};
diff --git a/arch/arm/boot/dts/atlas6-evb.dts b/arch/arm/boot/dts/atlas6-evb.dts
deleted file mode 100644
index ab042ca8dea1..000000000000
--- a/arch/arm/boot/dts/atlas6-evb.dts
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * DTS file for CSR SiRFatlas6 Evaluation Board
- *
- * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-/dts-v1/;
-
-/include/ "atlas6.dtsi"
-
-/ {
-	model = "CSR SiRFatlas6 Evaluation Board";
-	compatible = "sirf,atlas6-cb", "sirf,atlas6";
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	axi {
-		peri-iobg {
-			uart@b0060000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&uart1_pins_a>;
-			};
-			spi@b00d0000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi0_pins_a>;
-				spi@0 {
-					compatible = "spidev";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-			spi@b0170000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi1_pins_a>;
-			};
-			i2c0: i2c@b00e0000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				lcd@40 {
-					compatible = "sirf,lcd";
-					reg = <0x40>;
-				};
-			};
-
-		};
-		disp-iobg {
-			lcd@90010000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcd_24pins_a>;
-			};
-		};
-	};
-	display: display@0 {
-	    panels {
-		panel0: panel@0 {
-			panel-name = "Innolux TFT";
-			hactive = <800>;
-			vactive = <480>;
-			left_margin = <20>;
-			right_margin = <234>;
-			upper_margin = <3>;
-			lower_margin = <41>;
-			hsync_len = <3>;
-			vsync_len = <2>;
-			pixclock = <33264000>;
-			sync = <3>;
-			timing = <0x88>;
-			};
-	    };
-	};
-};
diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi
deleted file mode 100644
index 29598667420b..000000000000
--- a/arch/arm/boot/dts/atlas6.dtsi
+++ /dev/null
@@ -1,802 +0,0 @@
-/*
- * DTS file for CSR SiRFatlas6 SoC
- *
- * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-/include/ "skeleton.dtsi"
-/ {
-	compatible = "sirf,atlas6";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			/* from bootloader */
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			clocks = <&clks 12>;
-			operating-points = <
-				/* kHz    uV */
-				200000  1025000
-				400000  1025000
-				600000  1050000
-				800000  1100000
-			>;
-			clock-latency = <150000>;
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <29>;
-	};
-
-	axi {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x40000000 0x40000000 0x80000000>;
-
-		intc: interrupt-controller@80020000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "sirf,prima2-intc";
-			reg = <0x80020000 0x1000>;
-		};
-
-		sys-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x88000000 0x88000000 0x40000>;
-
-			clks: clock-controller@88000000 {
-				compatible = "sirf,atlas6-clkc";
-				reg = <0x88000000 0x1000>;
-				interrupts = <3>;
-				#clock-cells = <1>;
-			};
-
-			rstc: reset-controller@88010000 {
-				compatible = "sirf,prima2-rstc";
-				reg = <0x88010000 0x1000>;
-				#reset-cells = <1>;
-			};
-
-			rsc-controller@88020000 {
-				compatible = "sirf,prima2-rsc";
-				reg = <0x88020000 0x1000>;
-			};
-
-			cphifbg@88030000 {
-				compatible = "sirf,prima2-cphifbg";
-				reg = <0x88030000 0x1000>;
-				clocks = <&clks 42>;
-			};
-		};
-
-		mem-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x90000000 0x90000000 0x10000>;
-
-			memory-controller@90000000 {
-				compatible = "sirf,prima2-memc";
-				reg = <0x90000000 0x2000>;
-				interrupts = <27>;
-				clocks = <&clks 5>;
-			};
-
-			memc-monitor {
-				compatible = "sirf,prima2-memcmon";
-				reg = <0x90002000 0x200>;
-				interrupts = <4>;
-				clocks = <&clks 32>;
-			};
-		};
-
-		disp-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x90010000 0x90010000 0x30000>;
-
-			lcd@90010000 {
-				compatible = "sirf,prima2-lcd";
-				reg = <0x90010000 0x20000>;
-				interrupts = <30>;
-				clocks = <&clks 34>;
-				display=<&display>;
-				/* later transfer to pwm */
-				bl-gpio = <&gpio 7 0>;
-				default-panel = <&panel0>;
-			};
-
-			vpp@90020000 {
-				compatible = "sirf,prima2-vpp";
-				reg = <0x90020000 0x10000>;
-				interrupts = <31>;
-				clocks = <&clks 35>;
-				resets = <&rstc 6>;
-			};
-		};
-
-		graphics-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x98000000 0x98000000 0x8000000>;
-
-			graphics@98000000 {
-				compatible = "powervr,sgx510";
-				reg = <0x98000000 0x8000000>;
-				interrupts = <6>;
-				clocks = <&clks 32>;
-			};
-		};
-
-		graphics2d-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xa0000000 0xa0000000 0x8000000>;
-
-			ble@a0000000 {
-				compatible = "sirf,atlas6-ble";
-				reg = <0xa0000000 0x2000>;
-				interrupts = <5>;
-				clocks = <&clks 33>;
-			};
-		};
-
-		dsp-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xa8000000 0xa8000000 0x2000000>;
-
-			dspif@a8000000 {
-				compatible = "sirf,prima2-dspif";
-				reg = <0xa8000000 0x10000>;
-				interrupts = <9>;
-				resets = <&rstc 1>;
-			};
-
-			gps@a8010000 {
-				compatible = "sirf,prima2-gps";
-				reg = <0xa8010000 0x10000>;
-				interrupts = <7>;
-				clocks = <&clks 9>;
-				resets = <&rstc 2>;
-			};
-
-			dsp@a9000000 {
-				compatible = "sirf,prima2-dsp";
-				reg = <0xa9000000 0x1000000>;
-				interrupts = <8>;
-				clocks = <&clks 8>;
-				resets = <&rstc 0>;
-			};
-		};
-
-		peri-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb0000000 0xb0000000 0x180000>,
-			       <0x56000000 0x56000000 0x1b00000>;
-
-			timer@b0020000 {
-				compatible = "sirf,prima2-tick";
-				reg = <0xb0020000 0x1000>;
-				interrupts = <0>;
-				clocks = <&clks 11>;
-			};
-
-			nand@b0030000 {
-				compatible = "sirf,prima2-nand";
-				reg = <0xb0030000 0x10000>;
-				interrupts = <41>;
-				clocks = <&clks 26>;
-			};
-
-			audio@b0040000 {
-				compatible = "sirf,prima2-audio";
-				reg = <0xb0040000 0x10000>;
-				interrupts = <35>;
-				clocks = <&clks 27>;
-			};
-
-			uart0: uart@b0050000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0050000 0x1000>;
-				interrupts = <17>;
-				fifosize = <128>;
-				clocks = <&clks 13>;
-				dmas = <&dmac1 5>, <&dmac0 2>;
-				dma-names = "rx", "tx";
-			};
-
-			uart1: uart@b0060000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0060000 0x1000>;
-				interrupts = <18>;
-				fifosize = <32>;
-				clocks = <&clks 14>;
-				dma-names = "no-rx", "no-tx";
-			};
-
-			uart2: uart@b0070000 {
-				cell-index = <2>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0070000 0x1000>;
-				interrupts = <19>;
-				fifosize = <128>;
-				clocks = <&clks 15>;
-				dmas = <&dmac0 6>, <&dmac0 7>;
-				dma-names = "rx", "tx";
-			};
-
-			usp0: usp@b0080000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb0080000 0x10000>;
-				interrupts = <20>;
-				fifosize = <128>;
-				clocks = <&clks 28>;
-				dmas = <&dmac1 1>, <&dmac1 2>;
-				dma-names = "rx", "tx";
-			};
-
-			usp1: usp@b0090000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb0090000 0x10000>;
-				interrupts = <21>;
-				fifosize = <128>;
-				clocks = <&clks 29>;
-				dmas = <&dmac0 14>, <&dmac0 15>;
-				dma-names = "rx", "tx";
-			};
-
-			dmac0: dma-controller@b00b0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-dmac";
-				reg = <0xb00b0000 0x10000>;
-				interrupts = <12>;
-				clocks = <&clks 24>;
-				#dma-cells = <1>;
-			};
-
-			dmac1: dma-controller@b0160000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-dmac";
-				reg = <0xb0160000 0x10000>;
-				interrupts = <13>;
-				clocks = <&clks 25>;
-				#dma-cells = <1>;
-			};
-
-			vip@b00C0000 {
-				compatible = "sirf,prima2-vip";
-				reg = <0xb00C0000 0x10000>;
-				clocks = <&clks 31>;
-				interrupts = <14>;
-				sirf,vip-dma-rx-channel = <16>;
-			};
-
-			spi0: spi@b00d0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-spi";
-				reg = <0xb00d0000 0x10000>;
-				interrupts = <15>;
-				sirf,spi-num-chipselects = <1>;
-				dmas = <&dmac1 9>,
-				     <&dmac1 4>;
-				dma-names = "rx", "tx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clks 19>;
-				resets = <&rstc 26>;
-				status = "disabled";
-			};
-
-			spi1: spi@b0170000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-spi";
-				reg = <0xb0170000 0x10000>;
-				interrupts = <16>;
-				sirf,spi-num-chipselects = <1>;
-				dmas = <&dmac0 12>,
-				     <&dmac0 13>;
-				dma-names = "rx", "tx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clks 20>;
-				resets = <&rstc 27>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@b00e0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0xb00e0000 0x10000>;
-				interrupts = <24>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clks 17>;
-			};
-
-			i2c1: i2c@b00f0000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0xb00f0000 0x10000>;
-				interrupts = <25>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clks 18>;
-			};
-
-			tsc@b0110000 {
-				compatible = "sirf,prima2-tsc";
-				reg = <0xb0110000 0x10000>;
-				interrupts = <33>;
-				clocks = <&clks 16>;
-			};
-
-			gpio: pinctrl@b0120000 {
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "sirf,atlas6-pinctrl";
-				reg = <0xb0120000 0x10000>;
-				interrupts = <43 44 45 46 47>;
-				gpio-controller;
-				interrupt-controller;
-
-				lcd_16pins_a: lcd0@0 {
-					lcd {
-						sirf,pins = "lcd_16bitsgrp";
-						sirf,function = "lcd_16bits";
-					};
-				};
-				lcd_18pins_a: lcd0@1 {
-					lcd {
-						sirf,pins = "lcd_18bitsgrp";
-						sirf,function = "lcd_18bits";
-					};
-				};
-				lcd_24pins_a: lcd0@2 {
-					lcd {
-						sirf,pins = "lcd_24bitsgrp";
-						sirf,function = "lcd_24bits";
-					};
-				};
-				lcdrom_pins_a: lcdrom0@0 {
-					lcd {
-						sirf,pins = "lcdromgrp";
-						sirf,function = "lcdrom";
-					};
-				};
-				uart0_pins_a: uart0@0 {
-					uart {
-						sirf,pins = "uart0grp";
-						sirf,function = "uart0";
-					};
-				};
-				uart0_noflow_pins_a: uart0@1 {
-					uart {
-						sirf,pins = "uart0_nostreamctrlgrp";
-						sirf,function = "uart0_nostreamctrl";
-					};
-				};
-				uart1_pins_a: uart1@0 {
-					uart {
-						sirf,pins = "uart1grp";
-						sirf,function = "uart1";
-					};
-				};
-				uart2_pins_a: uart2@0 {
-					uart {
-						sirf,pins = "uart2grp";
-						sirf,function = "uart2";
-					};
-				};
-				uart2_noflow_pins_a: uart2@1 {
-					uart {
-						sirf,pins = "uart2_nostreamctrlgrp";
-						sirf,function = "uart2_nostreamctrl";
-					};
-				};
-				spi0_pins_a: spi0@0 {
-					spi {
-						sirf,pins = "spi0grp";
-						sirf,function = "spi0";
-					};
-				};
-				spi1_pins_a: spi1@0 {
-					spi {
-						sirf,pins = "spi1grp";
-						sirf,function = "spi1";
-					};
-				};
-				i2c0_pins_a: i2c0@0 {
-					i2c {
-						sirf,pins = "i2c0grp";
-						sirf,function = "i2c0";
-					};
-				};
-				i2c1_pins_a: i2c1@0 {
-					i2c {
-						sirf,pins = "i2c1grp";
-						sirf,function = "i2c1";
-					};
-				};
-                                pwm0_pins_a: pwm0@0 {
-                                        pwm {
-                                                sirf,pins = "pwm0grp";
-                                                sirf,function = "pwm0";
-                                        };
-                                };
-                                pwm1_pins_a: pwm1@0 {
-                                        pwm {
-                                                sirf,pins = "pwm1grp";
-                                                sirf,function = "pwm1";
-                                        };
-                                };
-                                pwm2_pins_a: pwm2@0 {
-                                        pwm {
-                                                sirf,pins = "pwm2grp";
-                                                sirf,function = "pwm2";
-                                        };
-                                };
-                                pwm3_pins_a: pwm3@0 {
-                                        pwm {
-                                                sirf,pins = "pwm3grp";
-                                                sirf,function = "pwm3";
-                                        };
-                                };
-				pwm4_pins_a: pwm4@0 {
-                                        pwm {
-                                                sirf,pins = "pwm4grp";
-                                                sirf,function = "pwm4";
-                                        };
-                                };
-                                gps_pins_a: gps@0 {
-                                        gps {
-                                                sirf,pins = "gpsgrp";
-                                                sirf,function = "gps";
-                                        };
-                                };
-                                vip_pins_a: vip@0 {
-                                        vip {
-                                                sirf,pins = "vipgrp";
-                                                sirf,function = "vip";
-                                        };
-                                };
-                                sdmmc0_pins_a: sdmmc0@0 {
-                                        sdmmc0 {
-                                                sirf,pins = "sdmmc0grp";
-                                                sirf,function = "sdmmc0";
-                                        };
-                                };
-                                sdmmc1_pins_a: sdmmc1@0 {
-                                        sdmmc1 {
-                                                sirf,pins = "sdmmc1grp";
-                                                sirf,function = "sdmmc1";
-                                        };
-                                };
-                                sdmmc2_pins_a: sdmmc2@0 {
-                                        sdmmc2 {
-                                                sirf,pins = "sdmmc2grp";
-                                                sirf,function = "sdmmc2";
-                                        };
-                                };
-				sdmmc2_nowp_pins_a: sdmmc2_nowp@0 {
-                                        sdmmc2_nowp {
-                                                sirf,pins = "sdmmc2_nowpgrp";
-                                                sirf,function = "sdmmc2_nowp";
-                                        };
-                                };
-                                sdmmc3_pins_a: sdmmc3@0 {
-                                        sdmmc3 {
-                                                sirf,pins = "sdmmc3grp";
-                                                sirf,function = "sdmmc3";
-                                        };
-                                };
-                                sdmmc5_pins_a: sdmmc5@0 {
-                                        sdmmc5 {
-                                                sirf,pins = "sdmmc5grp";
-                                                sirf,function = "sdmmc5";
-                                        };
-                                };
-				i2s_mclk_pins_a: i2s_mclk@0 {
-                                        i2s_mclk {
-                                                sirf,pins = "i2smclkgrp";
-                                                sirf,function = "i2s_mclk";
-                                        };
-                                };
-				i2s_ext_clk_input_pins_a: i2s_ext_clk_input@0 {
-                                        i2s_ext_clk_input {
-                                                sirf,pins = "i2s_ext_clk_inputgrp";
-                                                sirf,function = "i2s_ext_clk_input";
-                                        };
-                                };
-                                i2s_pins_a: i2s@0 {
-                                        i2s {
-                                                sirf,pins = "i2sgrp";
-                                                sirf,function = "i2s";
-                                        };
-                                };
-				i2s_no_din_pins_a: i2s_no_din@0 {
-                                        i2s_no_din {
-                                                sirf,pins = "i2s_no_dingrp";
-                                                sirf,function = "i2s_no_din";
-                                        };
-                                };
-				i2s_6chn_pins_a: i2s_6chn@0 {
-                                        i2s_6chn {
-                                                sirf,pins = "i2s_6chngrp";
-                                                sirf,function = "i2s_6chn";
-                                        };
-                                };
-                                ac97_pins_a: ac97@0 {
-                                        ac97 {
-                                                sirf,pins = "ac97grp";
-                                                sirf,function = "ac97";
-                                        };
-                                };
-                                nand_pins_a: nand@0 {
-                                        nand {
-                                                sirf,pins = "nandgrp";
-                                                sirf,function = "nand";
-                                        };
-                                };
-                                usp0_pins_a: usp0@0 {
-                                        usp0 {
-                                                sirf,pins = "usp0grp";
-                                                sirf,function = "usp0";
-                                        };
-                                };
-				usp0_uart_nostreamctrl_pins_a: usp0@1 {
-                                        usp0 {
-                                                sirf,pins = "usp0_uart_nostreamctrl_grp";
-                                                sirf,function = "usp0_uart_nostreamctrl";
-                                        };
-                                };
-				usp0_only_utfs_pins_a: usp0@2 {
-					usp0 {
-						sirf,pins = "usp0_only_utfs_grp";
-						sirf,function = "usp0_only_utfs";
-					};
-				};
-				usp0_only_urfs_pins_a: usp0@3 {
-					usp0 {
-						sirf,pins = "usp0_only_urfs_grp";
-						sirf,function = "usp0_only_urfs";
-					};
-				};
-                                usp1_pins_a: usp1@0 {
-                                        usp1 {
-                                                sirf,pins = "usp1grp";
-                                                sirf,function = "usp1";
-                                        };
-                                };
-				usp1_uart_nostreamctrl_pins_a: usp1@1 {
-                                        usp1 {
-                                                sirf,pins = "usp1_uart_nostreamctrl_grp";
-                                                sirf,function = "usp1_uart_nostreamctrl";
-                                        };
-                                };
-                                usb0_upli_drvbus_pins_a: usb0_upli_drvbus@0 {
-                                        usb0_upli_drvbus {
-                                                sirf,pins = "usb0_upli_drvbusgrp";
-                                                sirf,function = "usb0_upli_drvbus";
-                                        };
-                                };
-                                usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 {
-                                        usb1_utmi_drvbus {
-                                                sirf,pins = "usb1_utmi_drvbusgrp";
-                                                sirf,function = "usb1_utmi_drvbus";
-                                        };
-                                };
-                                usb1_dp_dn_pins_a: usb1_dp_dn@0 {
-                                        usb1_dp_dn {
-                                                sirf,pins = "usb1_dp_dngrp";
-                                                sirf,function = "usb1_dp_dn";
-                                        };
-                                };
-                                uart1_route_io_usb1_pins_a: uart1_route_io_usb1@0 {
-                                        uart1_route_io_usb1 {
-                                                sirf,pins = "uart1_route_io_usb1grp";
-                                                sirf,function = "uart1_route_io_usb1";
-                                        };
-                                };
-                                warm_rst_pins_a: warm_rst@0 {
-                                        warm_rst {
-                                                sirf,pins = "warm_rstgrp";
-                                                sirf,function = "warm_rst";
-                                        };
-                                };
-                                pulse_count_pins_a: pulse_count@0 {
-                                        pulse_count {
-                                                sirf,pins = "pulse_countgrp";
-                                                sirf,function = "pulse_count";
-                                        };
-                                };
-                                cko0_pins_a: cko0@0 {
-                                        cko0 {
-                                                sirf,pins = "cko0grp";
-                                                sirf,function = "cko0";
-                                        };
-                                };
-                                cko1_pins_a: cko1@0 {
-                                        cko1 {
-                                                sirf,pins = "cko1grp";
-                                                sirf,function = "cko1";
-                                        };
-                                };
-			};
-
-			pwm@b0130000 {
-				compatible = "sirf,prima2-pwm";
-				reg = <0xb0130000 0x10000>;
-				clocks = <&clks 21>;
-			};
-
-			efusesys@b0140000 {
-				compatible = "sirf,prima2-efuse";
-				reg = <0xb0140000 0x10000>;
-				clocks = <&clks 22>;
-			};
-
-			pulsec@b0150000 {
-				compatible = "sirf,prima2-pulsec";
-				reg = <0xb0150000 0x10000>;
-				interrupts = <48>;
-				clocks = <&clks 23>;
-			};
-
-			pci-iobg {
-				compatible = "sirf,prima2-pciiobg", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x56000000 0x56000000 0x1b00000>;
-
-				sd0: sdhci@56000000 {
-					cell-index = <0>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56000000 0x100000>;
-					interrupts = <38>;
-					bus-width = <8>;
-					clocks = <&clks 36>;
-				};
-
-				sd1: sdhci@56100000 {
-					cell-index = <1>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56100000 0x100000>;
-					interrupts = <38>;
-					status = "disabled";
-					bus-width = <4>;
-					clocks = <&clks 36>;
-				};
-
-				sd2: sdhci@56200000 {
-					cell-index = <2>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56200000 0x100000>;
-					interrupts = <23>;
-					status = "disabled";
-					bus-width = <4>;
-					clocks = <&clks 37>;
-				};
-
-				sd3: sdhci@56300000 {
-					cell-index = <3>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56300000 0x100000>;
-					interrupts = <23>;
-					status = "disabled";
-					bus-width = <4>;
-					clocks = <&clks 37>;
-				};
-
-				sd5: sdhci@56500000 {
-					cell-index = <5>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56500000 0x100000>;
-					interrupts = <39>;
-					status = "disabled";
-					bus-width = <4>;
-					clocks = <&clks 38>;
-				};
-
-				pci-copy@57900000 {
-					compatible = "sirf,prima2-pcicp";
-					reg = <0x57900000 0x100000>;
-					interrupts = <40>;
-				};
-
-				rom-interface@57a00000 {
-					compatible = "sirf,prima2-romif";
-					reg = <0x57a00000 0x100000>;
-				};
-			};
-		};
-
-		rtc-iobg {
-			compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80030000 0x10000>;
-
-			gpsrtc@1000 {
-				compatible = "sirf,prima2-gpsrtc";
-				reg = <0x1000 0x1000>;
-				interrupts = <55 56 57>;
-			};
-
-			sysrtc@2000 {
-				compatible = "sirf,prima2-sysrtc";
-				reg = <0x2000 0x1000>;
-				interrupts = <52 53 54>;
-			};
-
-			minigpsrtc@2000 {
-				compatible = "sirf,prima2-minigpsrtc";
-				reg = <0x2000 0x1000>;
-				interrupts = <54>;
-			};
-
-			pwrc@3000 {
-				compatible = "sirf,prima2-pwrc";
-				reg = <0x3000 0x1000>;
-				interrupts = <32>;
-			};
-		};
-
-		uus-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb8000000 0xb8000000 0x40000>;
-
-			usb0: usb@b00e0000 {
-				compatible = "chipidea,ci13611a-prima2";
-				reg = <0xb8000000 0x10000>;
-				interrupts = <10>;
-				clocks = <&clks 40>;
-			};
-
-			usb1: usb@b00f0000 {
-				compatible = "chipidea,ci13611a-prima2";
-				reg = <0xb8010000 0x10000>;
-				interrupts = <11>;
-				clocks = <&clks 41>;
-			};
-
-			security@b00f0000 {
-				compatible = "sirf,prima2-security";
-				reg = <0xb8030000 0x10000>;
-				interrupts = <42>;
-				clocks = <&clks 7>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/atlas7-evb.dts b/arch/arm/boot/dts/atlas7-evb.dts
deleted file mode 100644
index 1e9cd1a8508e..000000000000
--- a/arch/arm/boot/dts/atlas7-evb.dts
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * DTS file for CSR SiRFatlas7 Evaluation Board
- *
- * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-/dts-v1/;
-
-/include/ "atlas7.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "CSR SiRFatlas7 Evaluation Board";
-	compatible = "sirf,atlas7-cb", "sirf,atlas7";
-
-	chosen {
-		bootargs = "console=ttySiRF1,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vpp_reserved: vpp_mem@5e800000 {
-			compatible = "sirf,reserved-memory";
-			reg = <0x5e800000 0x800000>;
-		};
-
-		nanddisk_reserved: nanddisk@46000000 {
-			reg = <0x46000000 0x200000>;
-			no-map;
-		};
-	};
-
-
-	noc {
-		mediam {
-			nand@17050000 {
-				memory-region = <&nanddisk_reserved>;
-			};
-		};
-
-		gnssm {
-			spi1: spi@18200000 {
-				status = "okay";
-				spiflash: macronix@0{
-					status = "okay";
-					compatible = "macronix,mx25l6405d";
-					reg = <0>;
-					spi-max-frequency = <37500000>;
-					spi-cpha;
-					spi-cpol;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partitions@0 {
-						label = "myspiboot";
-						reg = <0x0 0x800000>;
-					};
-				};
-			};
-		};
-
-		btm {
-			uart6: uart@11000000 {
-				status = "okay";
-				sirf,uart-has-rtscts;
-			};
-		};
-
-		disp-iobg {
-			vpp@13110000 {
-				memory-region = <&vpp_reserved>;
-			};
-		};
-
-		display0: display@0 {
-			compatible = "lvds-panel";
-			source = "lvds.0";
-
-			bl-gpios = <&gpio_1 63 0>;
-			data-lines  = <24>;
-
-			display-timings {
-				native-mode = <&timing0>;
-				timing0: timing0 {
-					clock-frequency = <60000000>;
-					hactive = <1024>;
-					vactive = <600>;
-					hfront-porch = <220>;
-					hback-porch = <100>;
-					hsync-len = <1>;
-					vback-porch = <10>;
-					vfront-porch = <25>;
-					vsync-len = <1>;
-					hsync-active = <0>;
-					vsync-active = <0>;
-					de-active = <1>;
-					pixelclk-active = <1>;
-				};
-			};
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			status = "okay";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			rearview_key {
-				label = "rearview key";
-				linux,code = <KEY_CAMERA>;
-				gpios = <&gpio_1 3 GPIO_ACTIVE_LOW>;
-				debounce_interval = <100>;
-			};
-		};
-
-	};
-};
diff --git a/arch/arm/boot/dts/atlas7.dtsi b/arch/arm/boot/dts/atlas7.dtsi
deleted file mode 100644
index 83449b33de6b..000000000000
--- a/arch/arm/boot/dts/atlas7.dtsi
+++ /dev/null
@@ -1,1957 +0,0 @@
-/*
- * DTS file for CSR SiRFatlas7 SoC
- *
- * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-/include/ "skeleton.dtsi"
-/ {
-	compatible = "sirf,atlas7";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&gic>;
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		serial6 = &uart6;
-		serial9 = &usp2;
-		spi1 = &spi1;
-		spi2 = &usp1;
-		spi3 = &usp2;
-		spi4 = &usp3;
-	};
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <1>;
-		};
-	};
-
-	clocks {
-		xinw {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "xinw";
-		};
-		xin {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <26000000>;
-			clock-output-names = "xin";
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts = <0 29 4>, <0 82 4>;
-	};
-
-	noc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x10000000 0x10000000 0xc0000000>;
-
-		gic: interrupt-controller@10301000 {
-			compatible = "arm,cortex-a9-gic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x10301000 0x1000>,
-			     <0x10302000 0x0100>;
-		};
-
-		pmu_regulator: pmu_regulator@10E30020 {
-			compatible = "sirf,atlas7-pmu-ldo";
-			reg = <0x10E30020 0x4>;
-			ldo: ldo {
-				regulator-name = "ldo";
-			};
-		};
-
-		atlas7_codec: atlas7_codec@10E30000 {
-			#sound-dai-cells = <0>;
-			compatible = "sirf,atlas7-codec";
-			reg = <0x10E30000 0x400>;
-			clocks = <&car 62>;
-			ldo-supply = <&ldo>;
-		};
-
-		atlas7_iacc: atlas7_iacc@10D01000 {
-			#sound-dai-cells = <0>;
-			compatible = "sirf,atlas7-iacc";
-			reg = <0x10D01000 0x100>;
-			dmas = <&dmac3 0>, <&dmac3 7>, <&dmac3 8>,
-				<&dmac3 3>, <&dmac3 9>;
-			dma-names = "rx", "tx0", "tx1", "tx2", "tx3";
-			clocks = <&car 62>;
-		};
-
-		ipc@13240000 {
-			compatible = "sirf,atlas7-ipc";
-			ranges = <0x13240000 0x13240000 0x00010000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			hwspinlock {
-				compatible = "sirf,hwspinlock";
-				reg = <0x13240000 0x00010000>;
-
-				num-spinlocks = <30>;
-			};
-
-			ns_m3_rproc@0 {
-				compatible = "sirf,ns2m30-rproc";
-				reg = <0x13240000 0x00010000>;
-				interrupts = <0 123 0>;
-			};
-
-			ns_m3_rproc@1 {
-				compatible = "sirf,ns2m31-rproc";
-				reg = <0x13240000 0x00010000>;
-				interrupts = <0 126 0>;
-			};
-
-			ns_kal_rproc@0 {
-				compatible = "sirf,ns2kal0-rproc";
-				reg = <0x13240000 0x00010000>;
-				interrupts = <0 124 0>;
-			};
-
-			ns_kal_rproc@1 {
-				compatible = "sirf,ns2kal1-rproc";
-				reg = <0x13240000 0x00010000>;
-				interrupts = <0 127 0>;
-			};
-		};
-
-		pinctrl: ioc@18880000 {
-			compatible = "sirf,atlas7-ioc";
-			reg = <0x18880000 0x1000>,
-				<0x10E40000 0x1000>;
-
-			audio_ac97_pmx: audio_ac97@0 {
-				audio_ac97 {
-					groups = "audio_ac97_grp";
-					function = "audio_ac97";
-				};
-			};
-
-			audio_func_dbg_pmx: audio_func_dbg@0 {
-				audio_func_dbg {
-					groups = "audio_func_dbg_grp";
-					function = "audio_func_dbg";
-				};
-			};
-
-			audio_i2s_pmx: audio_i2s@0 {
-				audio_i2s {
-					groups = "audio_i2s_grp";
-					function = "audio_i2s";
-				};
-			};
-
-			audio_i2s_2ch_pmx: audio_i2s_2ch@0 {
-				audio_i2s_2ch {
-					groups = "audio_i2s_2ch_grp";
-					function = "audio_i2s_2ch";
-				};
-			};
-
-			audio_i2s_extclk_pmx: audio_i2s_extclk@0 {
-				audio_i2s_extclk {
-					groups = "audio_i2s_extclk_grp";
-					function = "audio_i2s_extclk";
-				};
-			};
-
-			audio_uart0_pmx: audio_uart0@0 {
-				audio_uart0 {
-					groups = "audio_uart0_grp";
-					function = "audio_uart0";
-				};
-			};
-
-			audio_uart1_pmx: audio_uart1@0 {
-				audio_uart1 {
-					groups = "audio_uart1_grp";
-					function = "audio_uart1";
-				};
-			};
-
-			audio_uart2_pmx0: audio_uart2@0 {
-				audio_uart2_0 {
-					groups = "audio_uart2_grp0";
-					function = "audio_uart2_m0";
-				};
-			};
-
-			audio_uart2_pmx1: audio_uart2@1 {
-				audio_uart2_1 {
-					groups = "audio_uart2_grp1";
-					function = "audio_uart2_m1";
-				};
-			};
-
-			c_can_trnsvr_pmx: c_can_trnsvr@0 {
-				c_can_trnsvr {
-					groups = "c_can_trnsvr_grp";
-					function = "c_can_trnsvr";
-				};
-			};
-
-			c0_can_pmx0: c0_can@0 {
-				c0_can_0 {
-					groups = "c0_can_grp0";
-					function = "c0_can_m0";
-				};
-			};
-
-			c0_can_pmx1: c0_can@1 {
-				c0_can_1 {
-					groups = "c0_can_grp1";
-					function = "c0_can_m1";
-				};
-			};
-
-			c1_can_pmx0: c1_can@0 {
-				c1_can_0 {
-					groups = "c1_can_grp0";
-					function = "c1_can_m0";
-				};
-			};
-
-			c1_can_pmx1: c1_can@1 {
-				c1_can_1 {
-					groups = "c1_can_grp1";
-					function = "c1_can_m1";
-				};
-			};
-
-			c1_can_pmx2: c1_can@2 {
-				c1_can_2 {
-					groups = "c1_can_grp2";
-					function = "c1_can_m2";
-				};
-			};
-
-			ca_audio_lpc_pmx: ca_audio_lpc@0 {
-				ca_audio_lpc {
-					groups = "ca_audio_lpc_grp";
-					function = "ca_audio_lpc";
-				};
-			};
-
-			ca_bt_lpc_pmx: ca_bt_lpc@0 {
-				ca_bt_lpc {
-					groups = "ca_bt_lpc_grp";
-					function = "ca_bt_lpc";
-				};
-			};
-
-			ca_coex_pmx: ca_coex@0 {
-				ca_coex {
-					groups = "ca_coex_grp";
-					function = "ca_coex";
-				};
-			};
-
-			ca_curator_lpc_pmx: ca_curator_lpc@0 {
-				ca_curator_lpc {
-					groups = "ca_curator_lpc_grp";
-					function = "ca_curator_lpc";
-				};
-			};
-
-			ca_pcm_debug_pmx: ca_pcm_debug@0 {
-				ca_pcm_debug {
-					groups = "ca_pcm_debug_grp";
-					function = "ca_pcm_debug";
-				};
-			};
-
-			ca_pio_pmx: ca_pio@0 {
-				ca_pio {
-					groups = "ca_pio_grp";
-					function = "ca_pio";
-				};
-			};
-
-			ca_sdio_debug_pmx: ca_sdio_debug@0 {
-				ca_sdio_debug {
-					groups = "ca_sdio_debug_grp";
-					function = "ca_sdio_debug";
-				};
-			};
-
-			ca_spi_pmx: ca_spi@0 {
-				ca_spi {
-					groups = "ca_spi_grp";
-					function = "ca_spi";
-				};
-			};
-
-			ca_trb_pmx: ca_trb@0 {
-				ca_trb {
-					groups = "ca_trb_grp";
-					function = "ca_trb";
-				};
-			};
-
-			ca_uart_debug_pmx: ca_uart_debug@0 {
-				ca_uart_debug {
-					groups = "ca_uart_debug_grp";
-					function = "ca_uart_debug";
-				};
-			};
-
-			clkc_pmx0: clkc@0 {
-				clkc_0 {
-					groups = "clkc_grp0";
-					function = "clkc_m0";
-				};
-			};
-
-			clkc_pmx1: clkc@1 {
-				clkc_1 {
-					groups = "clkc_grp1";
-					function = "clkc_m1";
-				};
-			};
-
-			gn_gnss_i2c_pmx: gn_gnss_i2c@0 {
-				gn_gnss_i2c {
-					groups = "gn_gnss_i2c_grp";
-					function = "gn_gnss_i2c";
-				};
-			};
-
-			gn_gnss_uart_nopause_pmx: gn_gnss_uart_nopause@0 {
-				gn_gnss_uart_nopause {
-					groups = "gn_gnss_uart_nopause_grp";
-					function = "gn_gnss_uart_nopause";
-				};
-			};
-
-			gn_gnss_uart_pmx: gn_gnss_uart@0 {
-				gn_gnss_uart {
-					groups = "gn_gnss_uart_grp";
-					function = "gn_gnss_uart";
-				};
-			};
-
-			gn_trg_spi_pmx0: gn_trg_spi@0 {
-				gn_trg_spi_0 {
-					groups = "gn_trg_spi_grp0";
-					function = "gn_trg_spi_m0";
-				};
-			};
-
-			gn_trg_spi_pmx1: gn_trg_spi@1 {
-				gn_trg_spi_1 {
-					groups = "gn_trg_spi_grp1";
-					function = "gn_trg_spi_m1";
-				};
-			};
-
-			cvbs_dbg_pmx: cvbs_dbg@0 {
-				cvbs_dbg {
-					groups = "cvbs_dbg_grp";
-					function = "cvbs_dbg";
-				};
-			};
-
-			cvbs_dbg_test_pmx0: cvbs_dbg_test@0 {
-				cvbs_dbg_test_0 {
-					groups = "cvbs_dbg_test_grp0";
-					function = "cvbs_dbg_test_m0";
-				};
-			};
-
-			cvbs_dbg_test_pmx1: cvbs_dbg_test@1 {
-				cvbs_dbg_test_1 {
-					groups = "cvbs_dbg_test_grp1";
-					function = "cvbs_dbg_test_m1";
-				};
-			};
-
-			cvbs_dbg_test_pmx2: cvbs_dbg_test@2 {
-				cvbs_dbg_test_2 {
-					groups = "cvbs_dbg_test_grp2";
-					function = "cvbs_dbg_test_m2";
-				};
-			};
-
-			cvbs_dbg_test_pmx3: cvbs_dbg_test@3 {
-				cvbs_dbg_test_3 {
-					groups = "cvbs_dbg_test_grp3";
-					function = "cvbs_dbg_test_m3";
-				};
-			};
-
-			cvbs_dbg_test_pmx4: cvbs_dbg_test@4 {
-				cvbs_dbg_test_4 {
-					groups = "cvbs_dbg_test_grp4";
-					function = "cvbs_dbg_test_m4";
-				};
-			};
-
-			cvbs_dbg_test_pmx5: cvbs_dbg_test@5 {
-				cvbs_dbg_test_5 {
-					groups = "cvbs_dbg_test_grp5";
-					function = "cvbs_dbg_test_m5";
-				};
-			};
-
-			cvbs_dbg_test_pmx6: cvbs_dbg_test@6 {
-				cvbs_dbg_test_6 {
-					groups = "cvbs_dbg_test_grp6";
-					function = "cvbs_dbg_test_m6";
-				};
-			};
-
-			cvbs_dbg_test_pmx7: cvbs_dbg_test@7 {
-				cvbs_dbg_test_7 {
-					groups = "cvbs_dbg_test_grp7";
-					function = "cvbs_dbg_test_m7";
-				};
-			};
-
-			cvbs_dbg_test_pmx8: cvbs_dbg_test@8 {
-				cvbs_dbg_test_8 {
-					groups = "cvbs_dbg_test_grp8";
-					function = "cvbs_dbg_test_m8";
-				};
-			};
-
-			cvbs_dbg_test_pmx9: cvbs_dbg_test@9 {
-				cvbs_dbg_test_9 {
-					groups = "cvbs_dbg_test_grp9";
-					function = "cvbs_dbg_test_m9";
-				};
-			};
-
-			cvbs_dbg_test_pmx10: cvbs_dbg_test@10 {
-				cvbs_dbg_test_10 {
-					groups = "cvbs_dbg_test_grp10";
-					function = "cvbs_dbg_test_m10";
-				};
-			};
-
-			cvbs_dbg_test_pmx11: cvbs_dbg_test@11 {
-				cvbs_dbg_test_11 {
-					groups = "cvbs_dbg_test_grp11";
-					function = "cvbs_dbg_test_m11";
-				};
-			};
-
-			cvbs_dbg_test_pmx12: cvbs_dbg_test@12 {
-				cvbs_dbg_test_12 {
-					groups = "cvbs_dbg_test_grp12";
-					function = "cvbs_dbg_test_m12";
-				};
-			};
-
-			cvbs_dbg_test_pmx13: cvbs_dbg_test@13 {
-				cvbs_dbg_test_13 {
-					groups = "cvbs_dbg_test_grp13";
-					function = "cvbs_dbg_test_m13";
-				};
-			};
-
-			cvbs_dbg_test_pmx14: cvbs_dbg_test@14 {
-				cvbs_dbg_test_14 {
-					groups = "cvbs_dbg_test_grp14";
-					function = "cvbs_dbg_test_m14";
-				};
-			};
-
-			cvbs_dbg_test_pmx15: cvbs_dbg_test@15 {
-				cvbs_dbg_test_15 {
-					groups = "cvbs_dbg_test_grp15";
-					function = "cvbs_dbg_test_m15";
-				};
-			};
-
-			gn_gnss_power_pmx: gn_gnss_power@0 {
-				gn_gnss_power {
-					groups = "gn_gnss_power_grp";
-					function = "gn_gnss_power";
-				};
-			};
-
-			gn_gnss_sw_status_pmx: gn_gnss_sw_status@0 {
-				gn_gnss_sw_status {
-					groups = "gn_gnss_sw_status_grp";
-					function = "gn_gnss_sw_status";
-				};
-			};
-
-			gn_gnss_eclk_pmx: gn_gnss_eclk@0 {
-				gn_gnss_eclk {
-					groups = "gn_gnss_eclk_grp";
-					function = "gn_gnss_eclk";
-				};
-			};
-
-			gn_gnss_irq1_pmx0: gn_gnss_irq1@0 {
-				gn_gnss_irq1_0 {
-					groups = "gn_gnss_irq1_grp0";
-					function = "gn_gnss_irq1_m0";
-				};
-			};
-
-			gn_gnss_irq2_pmx0: gn_gnss_irq2@0 {
-				gn_gnss_irq2_0 {
-					groups = "gn_gnss_irq2_grp0";
-					function = "gn_gnss_irq2_m0";
-				};
-			};
-
-			gn_gnss_tm_pmx: gn_gnss_tm@0 {
-				gn_gnss_tm {
-					groups = "gn_gnss_tm_grp";
-					function = "gn_gnss_tm";
-				};
-			};
-
-			gn_gnss_tsync_pmx: gn_gnss_tsync@0 {
-				gn_gnss_tsync {
-					groups = "gn_gnss_tsync_grp";
-					function = "gn_gnss_tsync";
-				};
-			};
-
-			gn_io_gnsssys_sw_cfg_pmx: gn_io_gnsssys_sw_cfg@0 {
-				gn_io_gnsssys_sw_cfg {
-					groups = "gn_io_gnsssys_sw_cfg_grp";
-					function = "gn_io_gnsssys_sw_cfg";
-				};
-			};
-
-			gn_trg_pmx0: gn_trg@0 {
-				gn_trg_0 {
-					groups = "gn_trg_grp0";
-					function = "gn_trg_m0";
-				};
-			};
-
-			gn_trg_pmx1: gn_trg@1 {
-				gn_trg_1 {
-					groups = "gn_trg_grp1";
-					function = "gn_trg_m1";
-				};
-			};
-
-			gn_trg_shutdown_pmx0: gn_trg_shutdown@0 {
-				gn_trg_shutdown_0 {
-					groups = "gn_trg_shutdown_grp0";
-					function = "gn_trg_shutdown_m0";
-				};
-			};
-
-			gn_trg_shutdown_pmx1: gn_trg_shutdown@1 {
-				gn_trg_shutdown_1 {
-					groups = "gn_trg_shutdown_grp1";
-					function = "gn_trg_shutdown_m1";
-				};
-			};
-
-			gn_trg_shutdown_pmx2: gn_trg_shutdown@2 {
-				gn_trg_shutdown_2 {
-					groups = "gn_trg_shutdown_grp2";
-					function = "gn_trg_shutdown_m2";
-				};
-			};
-
-			gn_trg_shutdown_pmx3: gn_trg_shutdown@3 {
-				gn_trg_shutdown_3 {
-					groups = "gn_trg_shutdown_grp3";
-					function = "gn_trg_shutdown_m3";
-				};
-			};
-
-			i2c0_pmx: i2c0@0 {
-				i2c0 {
-					groups = "i2c0_grp";
-					function = "i2c0";
-				};
-			};
-
-			i2c1_pmx: i2c1@0 {
-				i2c1 {
-					groups = "i2c1_grp";
-					function = "i2c1";
-				};
-			};
-
-			jtag_pmx0: jtag@0 {
-				jtag_0 {
-					groups = "jtag_grp0";
-					function = "jtag_m0";
-				};
-			};
-
-			ks_kas_spi_pmx0: ks_kas_spi@0 {
-				ks_kas_spi_0 {
-					groups = "ks_kas_spi_grp0";
-					function = "ks_kas_spi_m0";
-				};
-			};
-
-			ld_ldd_pmx: ld_ldd@0 {
-				ld_ldd {
-					groups = "ld_ldd_grp";
-					function = "ld_ldd";
-				};
-			};
-
-			ld_ldd_16bit_pmx: ld_ldd_16bit@0 {
-				ld_ldd_16bit {
-					groups = "ld_ldd_16bit_grp";
-					function = "ld_ldd_16bit";
-				};
-			};
-
-			ld_ldd_fck_pmx: ld_ldd_fck@0 {
-				ld_ldd_fck {
-					groups = "ld_ldd_fck_grp";
-					function = "ld_ldd_fck";
-				};
-			};
-
-			ld_ldd_lck_pmx: ld_ldd_lck@0 {
-				ld_ldd_lck {
-					groups = "ld_ldd_lck_grp";
-					function = "ld_ldd_lck";
-				};
-			};
-
-			lr_lcdrom_pmx: lr_lcdrom@0 {
-				lr_lcdrom {
-					groups = "lr_lcdrom_grp";
-					function = "lr_lcdrom";
-				};
-			};
-
-			lvds_analog_pmx: lvds_analog@0 {
-				lvds_analog {
-					groups = "lvds_analog_grp";
-					function = "lvds_analog";
-				};
-			};
-
-			nd_df_pmx: nd_df@0 {
-				nd_df {
-					groups = "nd_df_grp";
-					function = "nd_df";
-				};
-			};
-
-			nd_df_nowp_pmx: nd_df_nowp@0 {
-				nd_df_nowp {
-					groups = "nd_df_nowp_grp";
-					function = "nd_df_nowp";
-				};
-			};
-
-			ps_pmx: ps@0 {
-				ps {
-					groups = "ps_grp";
-					function = "ps";
-				};
-			};
-
-			pwc_core_on_pmx: pwc_core_on@0 {
-				pwc_core_on {
-					groups = "pwc_core_on_grp";
-					function = "pwc_core_on";
-				};
-			};
-
-			pwc_ext_on_pmx: pwc_ext_on@0 {
-				pwc_ext_on {
-					groups = "pwc_ext_on_grp";
-					function = "pwc_ext_on";
-				};
-			};
-
-			pwc_gpio3_clk_pmx: pwc_gpio3_clk@0 {
-				pwc_gpio3_clk {
-					groups = "pwc_gpio3_clk_grp";
-					function = "pwc_gpio3_clk";
-				};
-			};
-
-			pwc_io_on_pmx: pwc_io_on@0 {
-				pwc_io_on {
-					groups = "pwc_io_on_grp";
-					function = "pwc_io_on";
-				};
-			};
-
-			pwc_lowbatt_b_pmx0: pwc_lowbatt_b@0 {
-				pwc_lowbatt_b_0 {
-					groups = "pwc_lowbatt_b_grp0";
-					function = "pwc_lowbatt_b_m0";
-				};
-			};
-
-			pwc_mem_on_pmx: pwc_mem_on@0 {
-				pwc_mem_on {
-					groups = "pwc_mem_on_grp";
-					function = "pwc_mem_on";
-				};
-			};
-
-			pwc_on_key_b_pmx0: pwc_on_key_b@0 {
-				pwc_on_key_b_0 {
-					groups = "pwc_on_key_b_grp0";
-					function = "pwc_on_key_b_m0";
-				};
-			};
-
-			pwc_wakeup_src0_pmx: pwc_wakeup_src0@0 {
-				pwc_wakeup_src0 {
-					groups = "pwc_wakeup_src0_grp";
-					function = "pwc_wakeup_src0";
-				};
-			};
-
-			pwc_wakeup_src1_pmx: pwc_wakeup_src1@0 {
-				pwc_wakeup_src1 {
-					groups = "pwc_wakeup_src1_grp";
-					function = "pwc_wakeup_src1";
-				};
-			};
-
-			pwc_wakeup_src2_pmx: pwc_wakeup_src2@0 {
-				pwc_wakeup_src2 {
-					groups = "pwc_wakeup_src2_grp";
-					function = "pwc_wakeup_src2";
-				};
-			};
-
-			pwc_wakeup_src3_pmx: pwc_wakeup_src3@0 {
-				pwc_wakeup_src3 {
-					groups = "pwc_wakeup_src3_grp";
-					function = "pwc_wakeup_src3";
-				};
-			};
-
-			pw_cko0_pmx0: pw_cko0@0 {
-				pw_cko0_0 {
-					groups = "pw_cko0_grp0";
-					function = "pw_cko0_m0";
-				};
-			};
-
-			pw_cko0_pmx1: pw_cko0@1 {
-				pw_cko0_1 {
-					groups = "pw_cko0_grp1";
-					function = "pw_cko0_m1";
-				};
-			};
-
-			pw_cko0_pmx2: pw_cko0@2 {
-				pw_cko0_2 {
-					groups = "pw_cko0_grp2";
-					function = "pw_cko0_m2";
-				};
-			};
-
-			pw_cko1_pmx0: pw_cko1@0 {
-				pw_cko1_0 {
-					groups = "pw_cko1_grp0";
-					function = "pw_cko1_m0";
-				};
-			};
-
-			pw_cko1_pmx1: pw_cko1@1 {
-				pw_cko1_1 {
-					groups = "pw_cko1_grp1";
-					function = "pw_cko1_m1";
-				};
-			};
-
-			pw_i2s01_clk_pmx0: pw_i2s01_clk@0 {
-				pw_i2s01_clk_0 {
-					groups = "pw_i2s01_clk_grp0";
-					function = "pw_i2s01_clk_m0";
-				};
-			};
-
-			pw_i2s01_clk_pmx1: pw_i2s01_clk@1 {
-				pw_i2s01_clk_1 {
-					groups = "pw_i2s01_clk_grp1";
-					function = "pw_i2s01_clk_m1";
-				};
-			};
-
-			pw_pwm0_pmx: pw_pwm0@0 {
-				pw_pwm0 {
-					groups = "pw_pwm0_grp";
-					function = "pw_pwm0";
-				};
-			};
-
-			pw_pwm1_pmx: pw_pwm1@0 {
-				pw_pwm1 {
-					groups = "pw_pwm1_grp";
-					function = "pw_pwm1";
-				};
-			};
-
-			pw_pwm2_pmx0: pw_pwm2@0 {
-				pw_pwm2_0 {
-					groups = "pw_pwm2_grp0";
-					function = "pw_pwm2_m0";
-				};
-			};
-
-			pw_pwm2_pmx1: pw_pwm2@1 {
-				pw_pwm2_1 {
-					groups = "pw_pwm2_grp1";
-					function = "pw_pwm2_m1";
-				};
-			};
-
-			pw_pwm3_pmx0: pw_pwm3@0 {
-				pw_pwm3_0 {
-					groups = "pw_pwm3_grp0";
-					function = "pw_pwm3_m0";
-				};
-			};
-
-			pw_pwm3_pmx1: pw_pwm3@1 {
-				pw_pwm3_1 {
-					groups = "pw_pwm3_grp1";
-					function = "pw_pwm3_m1";
-				};
-			};
-
-			pw_pwm_cpu_vol_pmx0: pw_pwm_cpu_vol@0 {
-				pw_pwm_cpu_vol_0 {
-					groups = "pw_pwm_cpu_vol_grp0";
-					function = "pw_pwm_cpu_vol_m0";
-				};
-			};
-
-			pw_pwm_cpu_vol_pmx1: pw_pwm_cpu_vol@1 {
-				pw_pwm_cpu_vol_1 {
-					groups = "pw_pwm_cpu_vol_grp1";
-					function = "pw_pwm_cpu_vol_m1";
-				};
-			};
-
-			pw_backlight_pmx0: pw_backlight@0 {
-				pw_backlight_0 {
-					groups = "pw_backlight_grp0";
-					function = "pw_backlight_m0";
-				};
-			};
-
-			pw_backlight_pmx1: pw_backlight@1 {
-				pw_backlight_1 {
-					groups = "pw_backlight_grp1";
-					function = "pw_backlight_m1";
-				};
-			};
-
-			rg_eth_mac_pmx: rg_eth_mac@0 {
-				rg_eth_mac {
-					groups = "rg_eth_mac_grp";
-					function = "rg_eth_mac";
-				};
-			};
-
-			rg_gmac_phy_intr_n_pmx: rg_gmac_phy_intr_n@0 {
-				rg_gmac_phy_intr_n {
-					groups = "rg_gmac_phy_intr_n_grp";
-					function = "rg_gmac_phy_intr_n";
-				};
-			};
-
-			rg_rgmii_mac_pmx: rg_rgmii_mac@0 {
-				rg_rgmii_mac {
-					groups = "rg_rgmii_mac_grp";
-					function = "rg_rgmii_mac";
-				};
-			};
-
-			rg_rgmii_phy_ref_clk_pmx0: rg_rgmii_phy_ref_clk@0 {
-				rg_rgmii_phy_ref_clk_0 {
-					groups =
-						"rg_rgmii_phy_ref_clk_grp0";
-					function =
-						"rg_rgmii_phy_ref_clk_m0";
-				};
-			};
-
-			rg_rgmii_phy_ref_clk_pmx1: rg_rgmii_phy_ref_clk@1 {
-				rg_rgmii_phy_ref_clk_1 {
-					groups =
-						"rg_rgmii_phy_ref_clk_grp1";
-					function =
-						"rg_rgmii_phy_ref_clk_m1";
-				};
-			};
-
-			sd0_pmx: sd0@0 {
-				sd0 {
-					groups = "sd0_grp";
-					function = "sd0";
-				};
-			};
-
-			sd0_4bit_pmx: sd0_4bit@0 {
-				sd0_4bit {
-					groups = "sd0_4bit_grp";
-					function = "sd0_4bit";
-				};
-			};
-
-			sd1_pmx: sd1@0 {
-				sd1 {
-					groups = "sd1_grp";
-					function = "sd1";
-				};
-			};
-
-			sd1_4bit_pmx0: sd1_4bit@0 {
-				sd1_4bit_0 {
-					groups = "sd1_4bit_grp0";
-					function = "sd1_4bit_m0";
-				};
-			};
-
-			sd1_4bit_pmx1: sd1_4bit@1 {
-				sd1_4bit_1 {
-					groups = "sd1_4bit_grp1";
-					function = "sd1_4bit_m1";
-				};
-			};
-
-			sd2_pmx0: sd2@0 {
-				sd2_0 {
-					groups = "sd2_grp0";
-					function = "sd2_m0";
-				};
-			};
-
-			sd2_no_cdb_pmx0: sd2_no_cdb@0 {
-				sd2_no_cdb_0 {
-					groups = "sd2_no_cdb_grp0";
-					function = "sd2_no_cdb_m0";
-				};
-			};
-
-			sd3_pmx: sd3@0 {
-				sd3 {
-					groups = "sd3_grp";
-					function = "sd3";
-				};
-			};
-
-			sd5_pmx: sd5@0 {
-				sd5 {
-					groups = "sd5_grp";
-					function = "sd5";
-				};
-			};
-
-			sd6_pmx0: sd6@0 {
-				sd6_0 {
-					groups = "sd6_grp0";
-					function = "sd6_m0";
-				};
-			};
-
-			sd6_pmx1: sd6@1 {
-				sd6_1 {
-					groups = "sd6_grp1";
-					function = "sd6_m1";
-				};
-			};
-
-			sp0_ext_ldo_on_pmx: sp0_ext_ldo_on@0 {
-				sp0_ext_ldo_on {
-					groups = "sp0_ext_ldo_on_grp";
-					function = "sp0_ext_ldo_on";
-				};
-			};
-
-			sp0_qspi_pmx: sp0_qspi@0 {
-				sp0_qspi {
-					groups = "sp0_qspi_grp";
-					function = "sp0_qspi";
-				};
-			};
-
-			sp1_spi_pmx: sp1_spi@0 {
-				sp1_spi {
-					groups = "sp1_spi_grp";
-					function = "sp1_spi";
-				};
-			};
-
-			tpiu_trace_pmx: tpiu_trace@0 {
-				tpiu_trace {
-					groups = "tpiu_trace_grp";
-					function = "tpiu_trace";
-				};
-			};
-
-			uart0_pmx: uart0@0 {
-				uart0 {
-					groups = "uart0_grp";
-					function = "uart0";
-				};
-			};
-
-			uart0_nopause_pmx: uart0_nopause@0 {
-				uart0_nopause {
-					groups = "uart0_nopause_grp";
-					function = "uart0_nopause";
-				};
-			};
-
-			uart1_pmx: uart1@0 {
-				uart1 {
-					groups = "uart1_grp";
-					function = "uart1";
-				};
-			};
-
-			uart2_pmx: uart2@0 {
-				uart2 {
-					groups = "uart2_grp";
-					function = "uart2";
-				};
-			};
-
-			uart3_pmx0: uart3@0 {
-				uart3_0 {
-					groups = "uart3_grp0";
-					function = "uart3_m0";
-				};
-			};
-
-			uart3_pmx1: uart3@1 {
-				uart3_1 {
-					groups = "uart3_grp1";
-					function = "uart3_m1";
-				};
-			};
-
-			uart3_pmx2: uart3@2 {
-				uart3_2 {
-					groups = "uart3_grp2";
-					function = "uart3_m2";
-				};
-			};
-
-			uart3_pmx3: uart3@3 {
-				uart3_3 {
-					groups = "uart3_grp3";
-					function = "uart3_m3";
-				};
-			};
-
-			uart3_nopause_pmx0: uart3_nopause@0 {
-				uart3_nopause_0 {
-					groups = "uart3_nopause_grp0";
-					function = "uart3_nopause_m0";
-				};
-			};
-
-			uart3_nopause_pmx1: uart3_nopause@1 {
-				uart3_nopause_1 {
-					groups = "uart3_nopause_grp1";
-					function = "uart3_nopause_m1";
-				};
-			};
-
-			uart4_pmx0: uart4@0 {
-				uart4_0 {
-					groups = "uart4_grp0";
-					function = "uart4_m0";
-				};
-			};
-
-			uart4_pmx1: uart4@1 {
-				uart4_1 {
-					groups = "uart4_grp1";
-					function = "uart4_m1";
-				};
-			};
-
-			uart4_pmx2: uart4@2 {
-				uart4_2 {
-					groups = "uart4_grp2";
-					function = "uart4_m2";
-				};
-			};
-
-			uart4_nopause_pmx: uart4_nopause@0 {
-				uart4_nopause {
-					groups = "uart4_nopause_grp";
-					function = "uart4_nopause";
-				};
-			};
-
-			usb0_drvvbus_pmx: usb0_drvvbus@0 {
-				usb0_drvvbus {
-					groups = "usb0_drvvbus_grp";
-					function = "usb0_drvvbus";
-				};
-			};
-
-			usb1_drvvbus_pmx: usb1_drvvbus@0 {
-				usb1_drvvbus {
-					groups = "usb1_drvvbus_grp";
-					function = "usb1_drvvbus";
-				};
-			};
-
-			visbus_dout_pmx: visbus_dout@0 {
-				visbus_dout {
-					groups = "visbus_dout_grp";
-					function = "visbus_dout";
-				};
-			};
-
-			vi_vip1_pmx: vi_vip1@0 {
-				vi_vip1 {
-					groups = "vi_vip1_grp";
-					function = "vi_vip1";
-				};
-			};
-
-			vi_vip1_ext_pmx: vi_vip1_ext@0 {
-				vi_vip1_ext {
-					groups = "vi_vip1_ext_grp";
-					function = "vi_vip1_ext";
-				};
-			};
-
-			vi_vip1_low8bit_pmx: vi_vip1_low8bit@0 {
-				vi_vip1_low8bit {
-					groups = "vi_vip1_low8bit_grp";
-					function = "vi_vip1_low8bit";
-				};
-			};
-
-			vi_vip1_high8bit_pmx: vi_vip1_high8bit@0 {
-				vi_vip1_high8bit {
-					groups = "vi_vip1_high8bit_grp";
-					function = "vi_vip1_high8bit";
-				};
-			};
-		};
-
-		pmipc {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x13240000 0x13240000 0x00010000>;
-			pmipc@0x13240000 {
-				compatible = "sirf,atlas7-pmipc";
-				reg = <0x13240000 0x00010000>;
-			};
-		};
-
-		dramfw {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x10830000 0x10830000 0x18000>;
-			dramfw@10820000 {
-				compatible = "sirf,nocfw-dramfw";
-				reg = <0x10830000 0x18000>;
-			};
-		};
-
-		spramfw {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x10250000 0x10250000 0x3000>;
-			spramfw@10820000 {
-				compatible = "sirf,nocfw-spramfw";
-				reg = <0x10250000 0x3000>;
-			};
-		};
-
-		cpum {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x10200000 0x10200000 0x3000>;
-			cpum@10200000 {
-				compatible = "sirf,nocfw-cpum";
-				reg = <0x10200000 0x3000>;
-			};
-		};
-
-		cgum {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x18641000 0x18641000 0x3000>,
-					 <0x18620000 0x18620000 0x1000>,
-					<0x18630000 0x18630000 0x10000>;
-
-			cgum@18641000 {
-				compatible = "sirf,nocfw-cgum";
-				reg = <0x18641000 0x3000>;
-			};
-
-			car: clock-controller@18620000 {
-				compatible = "sirf,atlas7-car";
-				reg = <0x18620000 0x1000>;
-				#clock-cells = <1>;
-				#reset-cells = <1>;
-			};
-			pwm: pwm@18630000 {
-				compatible = "sirf,prima2-pwm";
-				#pwm-cells = <2>;
-				reg = <0x18630000 0x10000>;
-				clocks = <&car 138>, <&car 139>, <&car 237>,
-					<&car 240>,  <&car 140>, <&car 246>;
-				clock-names = "pwmc", "sigsrc0", "sigsrc1",
-					"sigsrc2", "sigsrc3", "sigsrc4";
-			};
-		};
-
-		gnssm {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x18000000 0x18000000 0x0000ffff>,
-				<0x18010000 0x18010000 0x1000>,
-				<0x18020000 0x18020000 0x1000>,
-				<0x18030000 0x18030000 0x1000>,
-				<0x18040000 0x18040000 0x1000>,
-				<0x18050000 0x18050000 0x1000>,
-				<0x18060000 0x18060000 0x1000>,
-				<0x180b0000 0x180b0000 0x4000>,
-				<0x18100000 0x18100000 0x3000>,
-				<0x18250000 0x18250000 0x10000>,
-				<0x18200000 0x18200000 0x1000>;
-
-			dmac0: dma-controller@18000000 {
-				cell-index = <0>;
-				compatible = "sirf,atlas7-dmac";
-				reg = <0x18000000 0x1000>;
-				interrupts = <0 12 0>;
-				clocks = <&car 89>;
-				dma-channels = <16>;
-				#dma-cells = <1>;
-			};
-
-			gnssmfw@0x18100000 {
-				compatible = "sirf,nocfw-gnssm";
-				reg = <0x18100000 0x3000>;
-			};
-
-			uart0: uart@18010000 {
-				cell-index = <0>;
-				compatible = "sirf,atlas7-uart";
-				reg = <0x18010000 0x1000>;
-				interrupts = <0 17 0>;
-				clocks = <&car 90>;
-				fifosize = <128>;
-				dmas = <&dmac0 3>, <&dmac0 2>;
-				dma-names = "rx", "tx";
-			};
-
-			uart1: uart@18020000 {
-				cell-index = <1>;
-				compatible = "sirf,atlas7-uart";
-				reg = <0x18020000 0x1000>;
-				interrupts = <0 18 0>;
-				clocks = <&car 88>;
-				fifosize = <32>;
-			};
-
-			uart2: uart@18030000 {
-				cell-index = <2>;
-				compatible = "sirf,atlas7-uart";
-				reg = <0x18030000 0x1000>;
-				interrupts = <0 19 0>;
-				clocks = <&car 91>;
-				fifosize = <128>;
-				dmas = <&dmac0 6>, <&dmac0 7>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-			uart3: uart@18040000 {
-				cell-index = <3>;
-				compatible = "sirf,atlas7-uart";
-				reg = <0x18040000 0x1000>;
-				interrupts = <0 66 0>;
-				clocks = <&car 92>;
-				fifosize = <128>;
-				dmas = <&dmac0 4>, <&dmac0 5>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-			uart4: uart@18050000 {
-				cell-index = <4>;
-				compatible = "sirf,atlas7-uart";
-				reg = <0x18050000 0x1000>;
-				interrupts = <0 69 0>;
-				clocks = <&car 93>;
-				fifosize = <128>;
-				dmas = <&dmac0 0>, <&dmac0 1>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-			uart5: uart@18060000 {
-				cell-index = <5>;
-				compatible = "sirf,atlas7-uart";
-				reg = <0x18060000 0x1000>;
-				interrupts = <0 71 0>;
-				clocks = <&car 94>;
-				fifosize = <128>;
-				dmas = <&dmac0 8>, <&dmac0 9>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-			gmac: eth@180b0000 {
-				compatible = "snps, dwc-eth-qos";
-				reg = <0x180b0000 0x4000>;
-				interrupts = <0 59 0>, <0 70 0>;
-				interrupt-names = "macirq", "macpmt";
-				clocks = <&car 39>, <&car 45>,
-				       <&car 86>, <&car 87>;
-				clock-names = "gnssm_rgmii", "gnssm_gmac",
-					"rgmii", "gmac";
-				local-mac-address = [00 00 00 00 00 00];
-				phy-mode = "rgmii";
-			};
-			dspub@18250000 {
-				compatible = "dx,cc44p";
-				reg = <0x18250000 0x10000>;
-				interrupts = <0 27 0>;
-			};
-
-			spi1: spi@18200000 {
-				compatible = "sirf,prima2-spi";
-				reg = <0x18200000 0x1000>;
-				interrupts = <0 16 0>;
-				clocks = <&car 95>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				dmas = <&dmac0 12>, <&dmac0 13>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-		};
-
-
-		gpum {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x13000000 0x13000000 0x3000>,
-				<0x13010000 0x13010000 0x1400>,
-				<0x13010800 0x13010800 0x100>,
-				<0x13011000 0x13011000 0x100>;
-			gpum@0x13000000 {
-				compatible = "sirf,nocfw-gpum";
-				reg = <0x13000000 0x3000>;
-			};
-			dmacsdrr: dma-controller@13010800 {
-				cell-index = <5>;
-				compatible = "sirf,atlas7-dmac-v2";
-				reg = <0x13010800 0x100>;
-				interrupts = <0 8 0>;
-				clocks = <&car 127>;
-				#dma-cells = <1>;
-				#dma-channels = <1>;
-			};
-			dmacsdrw: dma-controller@13011000 {
-				cell-index = <6>;
-				compatible = "sirf,atlas7-dmac-v2";
-				reg = <0x13011000 0x100>;
-				interrupts = <0 9 0>;
-				clocks = <&car 127>;
-				#dma-cells = <1>;
-				#dma-channels = <1>;
-			};
-			sdr@0x13010000 {
-				compatible = "sirf,atlas7-sdr";
-				reg = <0x13010000 0x1400>;
-				interrupts = <0 7 0>,
-					   <0 8 0>,
-					   <0 9 0>;
-				clocks = <&car 127>;
-				dmas = <&dmacsdrr 0>, <&dmacsdrw 0>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		mediam {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x15000000 0x15000000 0x00600000>,
-				<0x16000000 0x16000000 0x00200000>,
-				<0x17000000 0x17000000 0x10000>,
-				<0x17020000 0x17020000 0x1000>,
-				<0x17030000 0x17030000 0x1000>,
-				<0x17040000 0x17040000 0x1000>,
-				<0x17050000 0x17050000 0x10000>,
-				<0x17060000 0x17060000 0x200>,
-				<0x17060200 0x17060200 0x100>,
-				<0x17070000 0x17070000 0x200>,
-				<0x17070200 0x17070200 0x100>,
-				<0x170A0000 0x170A0000 0x3000>;
-
-			multimedia@15000000 {
-				compatible = "sirf,atlas7-video-codec";
-				reg = <0x15000000 0x10000>;
-				interrupts = <0 5 0>;
-				clocks = <&car 102>;
-			};
-
-			mediam@170A0000 {
-				compatible = "sirf,nocfw-mediam";
-				reg = <0x170A0000 0x3000>;
-			};
-
-			gpio_0: gpio_mediam@17040000 {
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "sirf,atlas7-gpio";
-				reg = <0x17040000 0x1000>;
-				interrupts = <0 13 0>, <0 14 0>;
-				clocks = <&car 107>;
-				clock-names = "gpio0_io";
-				gpio-controller;
-				interrupt-controller;
-
-				gpio-banks = <2>;
-				gpio-ranges = <&pinctrl 0 0 0>,
-						<&pinctrl 32 0 0>;
-				gpio-ranges-group-names = "lvds_gpio_grp",
-							"uart_nand_gpio_grp";
-			};
-
-			nand@17050000 {
-				compatible = "sirf,atlas7-nand";
-				reg = <0x17050000 0x10000>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&nd_df_pmx>;
-				interrupts = <0 41 0>;
-				clocks = <&car 108>, <&car 112>;
-				clock-names = "nand_io", "nand_nand";
-			};
-
-			sd0: sdhci@16000000 {
-				cell-index = <0>;
-				compatible = "sirf,atlas7-sdhc";
-				reg = <0x16000000 0x100000>;
-				interrupts = <0 38 0>;
-				clocks = <&car 109>, <&car 111>;
-				clock-names = "core", "iface";
-				wp-inverted;
-				non-removable;
-				status = "disabled";
-				bus-width = <8>;
-			};
-
-			sd1: sdhci@16100000 {
-				cell-index = <1>;
-				compatible = "sirf,atlas7-sdhc";
-				reg = <0x16100000 0x100000>;
-				interrupts = <0 38 0>;
-				clocks = <&car 109>, <&car 111>;
-				clock-names = "core", "iface";
-				non-removable;
-				status = "disabled";
-				bus-width = <8>;
-			};
-
-			jpeg@17000000 {
-				compatible = "sirf,atlas7-jpeg";
-				reg = <0x17000000 0x10000>;
-				interrupts = <0 72 0>,
-					<0 73 0>;
-				clocks = <&car 103>;
-			};
-
-			usb0: usb@17060000 {
-				cell-index = <0>;
-				compatible = "sirf,atlas7-usb";
-				reg = <0x17060000 0x200>;
-				interrupts = <0 10 0>;
-				clocks = <&car 113>;
-				sirf,usbphy = <&usbphy0>;
-				phy_type = "utmi";
-				dr_mode = "otg";
-				maximum-speed = "high-speed";
-				status = "okay";
-			};
-
-			usb1: usb@17070000 {
-				cell-index = <1>;
-				compatible = "sirf,atlas7-usb";
-				reg = <0x17070000 0x200>;
-				interrupts = <0 11 0>;
-				clocks = <&car 114>;
-				sirf,usbphy = <&usbphy1>;
-				phy_type = "utmi";
-				dr_mode = "host";
-				maximum-speed = "high-speed";
-				status = "okay";
-			};
-
-			usbphy0: usbphy@0 {
-				compatible = "sirf,atlas7-usbphy";
-				reg = <0x17060200 0x100>;
-				clocks = <&car 115>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@1 {
-				compatible = "sirf,atlas7-usbphy";
-				reg = <0x17070200 0x100>;
-				clocks = <&car 116>;
-				status = "okay";
-			};
-
-			i2c0: i2c@17020000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0x17020000 0x1000>;
-				interrupts = <0 24 0>;
-				clocks = <&car 105>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-		};
-
-		vdifm {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x13290000 0x13290000 0x3000>,
-				<0x13300000 0x13300000 0x1000>,
-				<0x14200000 0x14200000 0x600000>;
-
-			vdifm@13290000 {
-				compatible = "sirf,nocfw-vdifm";
-				reg = <0x13290000 0x3000>;
-			};
-
-			gpio_1: gpio_vdifm@13300000 {
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "sirf,atlas7-gpio";
-				reg = <0x13300000 0x1000>;
-				interrupts = <0 43 0>, <0 44 0>,
-						<0 45 0>, <0 46 0>;
-				clocks = <&car 84>;
-				clock-names = "gpio1_io";
-				gpio-controller;
-				interrupt-controller;
-
-				gpio-banks = <4>;
-				gpio-ranges = <&pinctrl 0 0 0>,
-						<&pinctrl 32 0 0>,
-						<&pinctrl 64 0 0>,
-						<&pinctrl 96 0 0>;
-				gpio-ranges-group-names = "gnss_gpio_grp",
-							"lcd_vip_gpio_grp",
-							"sdio_i2s_gpio_grp",
-							"sp_rgmii_gpio_grp";
-			};
-
-			sd2: sdhci@14200000 {
-				cell-index = <2>;
-				compatible = "sirf,atlas7-sdhc";
-				reg = <0x14200000 0x100000>;
-				interrupts = <0 23 0>;
-				clocks = <&car 70>, <&car 75>;
-				clock-names = "core", "iface";
-				status = "disabled";
-				bus-width = <4>;
-				sd-uhs-sdr50;
-				vqmmc-supply = <&vqmmc>;
-				vqmmc: vqmmc@2 {
-					regulator-min-microvolt = <1650000>;
-					regulator-max-microvolt = <1950000>;
-					regulator-name = "vqmmc-ldo";
-					regulator-type = "voltage";
-					regulator-boot-on;
-					regulator-allow-bypass;
-				};
-			};
-
-			sd3: sdhci@14300000 {
-				cell-index = <3>;
-				compatible = "sirf,atlas7-sdhc";
-				reg = <0x14300000 0x100000>;
-				interrupts = <0 23 0>;
-				clocks = <&car 76>, <&car 81>;
-				clock-names = "core", "iface";
-				status = "disabled";
-				bus-width = <4>;
-			};
-
-			sd5: sdhci@14500000 {
-				cell-index = <5>;
-				compatible = "sirf,atlas7-sdhc";
-				reg = <0x14500000 0x100000>;
-				interrupts = <0 39 0>;
-				clocks = <&car 71>, <&car 76>;
-				clock-names = "core", "iface";
-				status = "disabled";
-				bus-width = <4>;
-				loop-dma;
-			};
-
-			sd6: sdhci@14600000 {
-				cell-index = <6>;
-				compatible = "sirf,atlas7-sdhc";
-				reg = <0x14600000 0x100000>;
-				interrupts = <0 98 0>;
-				clocks = <&car 72>, <&car 77>;
-				clock-names = "core", "iface";
-				status = "disabled";
-				bus-width = <4>;
-			};
-
-			sd7: sdhci@14700000 {
-				cell-index = <7>;
-				compatible = "sirf,atlas7-sdhc";
-				reg = <0x14700000 0x100000>;
-				interrupts = <0 98 0>;
-				clocks = <&car 72>, <&car 77>;
-				clock-names = "core", "iface";
-				status = "disabled";
-				bus-width = <4>;
-			};
-		};
-
-		audiom {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x10d50000 0x10d50000 0x0000ffff>,
-					<0x10d60000 0x10d60000 0x0000ffff>,
-					<0x10d80000 0x10d80000 0x0000ffff>,
-					<0x10d90000 0x10d90000 0x0000ffff>,
-					<0x10ED0000 0x10ED0000 0x3000>,
-					<0x10dc8000 0x10dc8000 0x1000>,
-					<0x10dc0000 0x10dc0000 0x1000>,
-					<0x10db0000 0x10db0000 0x4000>,
-					<0x10d40000 0x10d40000 0x1000>,
-					<0x10d30000 0x10d30000 0x1000>;
-
-			timer@10dc0000 {
-				compatible = "sirf,atlas7-tick";
-				reg = <0x10dc0000 0x1000>;
-				interrupts = <0 0 0>,
-					   <0 1 0>,
-					   <0 2 0>,
-					   <0 49 0>,
-					   <0 50 0>,
-					   <0 51 0>;
-				clocks = <&car 47>;
-			};
-
-			timerb@10dc8000 {
-					compatible = "sirf,atlas7-tick";
-					reg = <0x10dc8000 0x1000>;
-					interrupts = <0 74 0>,
-							   <0 75 0>,
-							   <0 76 0>,
-							   <0 77 0>,
-							   <0 78 0>,
-							   <0 79 0>;
-					clocks = <&car 47>;
-			};
-
-			vip0@10db0000 {
-				compatible = "sirf,atlas7-vip0";
-				reg = <0x10db0000 0x2000>;
-				interrupts = <0 85 0>;
-				sirf,vip_cma_size = <0xC00000>;
-			};
-
-			cvd@10db2000 {
-				compatible = "sirf,cvd";
-				reg = <0x10db2000 0x2000>;
-				clocks = <&car 46>;
-			};
-
-			dmac2: dma-controller@10d50000 {
-				cell-index = <2>;
-				compatible = "sirf,atlas7-dmac";
-				reg = <0x10d50000 0xffff>;
-				interrupts = <0 55 0>;
-				clocks = <&car 60>;
-				dma-channels = <16>;
-				#dma-cells = <1>;
-			};
-
-			dmac3: dma-controller@10d60000 {
-				cell-index = <3>;
-				compatible = "sirf,atlas7-dmac";
-				reg = <0x10d60000 0xffff>;
-				interrupts = <0 56 0>;
-				clocks = <&car 61>;
-				dma-channels = <16>;
-				#dma-cells = <1>;
-			};
-
-			adc: adc@10d80000 {
-				compatible = "sirf,atlas7-adc";
-				reg = <0x10d80000 0xffff>;
-				interrupts = <0 34 0>;
-				clocks = <&car 49>;
-				#io-channel-cells = <1>;
-			};
-
-			pulsec@10d90000 {
-				compatible = "sirf,prima2-pulsec";
-				reg = <0x10d90000 0xffff>;
-				interrupts = <0 42 0>;
-				clocks = <&car 54>;
-			};
-
-			audiom@10ED0000 {
-				compatible = "sirf,nocfw-audiom";
-				reg = <0x10ED0000 0x3000>;
-				interrupts = <0 102 0>;
-			};
-
-			usp1: usp@10d30000 {
-				cell-index = <1>;
-				reg = <0x10d30000 0x1000>;
-				fifosize = <512>;
-				clocks = <&car 58>;
-				dmas = <&dmac2 6>, <&dmac2 7>;
-				dma-names = "rx", "tx";
-			};
-
-			usp2: usp@10d40000 {
-				cell-index = <2>;
-				reg = <0x10d40000 0x1000>;
-				interrupts = <0 22 0>;
-				clocks = <&car 59>;
-				dmas = <&dmac2 12>, <&dmac2 13>;
-				dma-names = "rx", "tx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		ddrm {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x10820000 0x10820000 0x3000>,
-					<0x10800000 0x10800000 0x2000>;
-			ddrm@10820000 {
-				compatible = "sirf,nocfw-ddrm";
-				reg = <0x10820000 0x3000>;
-				interrupts = <0 105 0>;
-			};
-
-			memory-controller@0x10800000 {
-				compatible = "sirf,atlas7-memc";
-				reg = <0x10800000 0x2000>;
-			};
-
-		};
-
-		btm {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x11002000 0x11002000 0x0000ffff>,
-			       <0x11010000 0x11010000 0x3000>,
-			       <0x11000000 0x11000000 0x1000>,
-			       <0x11001000 0x11001000 0x1000>;
-
-			dmac4: dma-controller@11002000 {
-				cell-index = <4>;
-				compatible = "sirf,atlas7-dmac";
-				reg = <0x11002000 0x1000>;
-				interrupts = <0 99 0>;
-				clocks = <&car 130>;
-				dma-channels = <16>;
-				#dma-cells = <1>;
-			};
-			uart6: uart@11000000 {
-				cell-index = <6>;
-				compatible = "sirf,atlas7-bt-uart",
-						"sirf,atlas7-uart";
-				reg = <0x11000000 0x1000>;
-				interrupts = <0 100 0>;
-				clocks = <&car 131>, <&car 133>, <&car 134>;
-				clock-names = "uart", "general", "noc";
-				fifosize = <128>;
-				dmas = <&dmac4 12>, <&dmac4 13>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			usp3: usp@11001000 {
-				compatible = "sirf,atlas7-bt-usp",
-					   "sirf,prima2-usp-pcm";
-				cell-index = <3>;
-				reg = <0x11001000 0x1000>;
-				fifosize = <512>;
-				clocks = <&car 132>, <&car 129>, <&car 133>,
-					<&car 134>, <&car 135>;
-				clock-names = "usp3_io", "a7ca_btss", "a7ca_io",
-					"noc_btm_io", "thbtm_io";
-				dmas = <&dmac4 0>, <&dmac4 1>;
-				dma-names = "rx", "tx";
-			};
-
-			btm@11010000 {
-				compatible = "sirf,nocfw-btm";
-				reg = <0x11010000 0x3000>;
-			};
-		};
-
-		rtcm {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x18810000 0x18810000 0x3000>,
-				<0x18840000 0x18840000 0x1000>,
-				<0x18890000 0x18890000 0x1000>,
-				<0x188B0000 0x188B0000 0x10000>,
-				<0x188D0000 0x188D0000 0x1000>;
-			rtcm@18810000 {
-				compatible = "sirf,nocfw-rtcm";
-				reg = <0x18810000 0x3000>;
-				interrupts = <0 109 0>;
-			};
-
-			gpio_2: gpio_rtcm@18890000 {
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "sirf,atlas7-gpio";
-				reg = <0x18890000 0x1000>;
-				interrupts = <0 47 0>;
-				gpio-controller;
-				interrupt-controller;
-
-				gpio-banks = <1>;
-				gpio-ranges = <&pinctrl 0 0 0>;
-				gpio-ranges-group-names = "rtc_gpio_grp";
-			};
-
-			rtc-iobg@18840000 {
-				compatible = "sirf,prima2-rtciobg",
-					"sirf-prima2-rtciobg-bus",
-					"simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x18840000 0x1000>;
-
-				sysrtc@2000 {
-					compatible = "sirf,prima2-sysrtc";
-					reg = <0x2000 0x100>;
-					interrupts = <0 52 0>;
-				};
-				pwrc@3000 {
-					compatible = "sirf,atlas7-pwrc";
-					reg = <0x3000 0x100>;
-				};
-			};
-
-			qspi: flash@188B0000 {
-				cell-index = <0>;
-				compatible = "sirf,atlas7-qspi-nor";
-				reg = <0x188B0000 0x10000>;
-				interrupts = <0 15 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			retain@0x188D0000 {
-				compatible = "sirf,atlas7-retain";
-				reg = <0x188D0000 0x1000>;
-			};
-
-		};
-		disp-iobg {
-			/* lcdc0 */
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x13100000 0x13100000 0x20000>,
-				<0x10e10000 0x10e10000 0x10000>,
-				<0x17010000 0x17010000 0x10000>;
-
-			lcd@13100000 {
-				compatible = "sirf,atlas7-lcdc";
-				reg = <0x13100000 0x10000>;
-				interrupts = <0 30 0>;
-				clocks = <&car 79>;
-			};
-			vpp@13110000 {
-				compatible = "sirf,atlas7-vpp";
-				reg = <0x13110000 0x10000>;
-				interrupts = <0 31 0>;
-				clocks = <&car 78>;
-				resets = <&car 29>;
-			};
-			lvds@10e10000 {
-				compatible = "sirf,atlas7-lvdsc";
-				reg = <0x10e10000 0x10000>;
-				interrupts = <0 64 0>;
-				clocks = <&car 54>;
-				resets = <&car 29>;
-			};
-			g2d@17010000 {
-				compatible = "sirf, atlas7-g2d";
-				reg = <0x17010000 0x10000>;
-				interrupts = <0 61 0>;
-				clocks = <&car 104>;
-			};
-
-		};
-
-		graphics-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x12000000 0x12000000 0x1000000>;
-
-			graphics@12000000 {
-				compatible = "powervr,sgx531";
-				reg = <0x12000000 0x1000000>;
-				interrupts = <0 6 0>;
-				clocks = <&car 126>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/axis/Makefile b/arch/arm/boot/dts/axis/Makefile
new file mode 100644
index 000000000000..2cab41451281
--- /dev/null
+++ b/arch/arm/boot/dts/axis/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MACH_ARTPEC6) += \
+	artpec6-devboard.dtb
+dtb-$(CONFIG_MACH_ARTPEC6) += \
+	artpec6-devboard.dtb
diff --git a/arch/arm/boot/dts/axis/artpec6-devboard.dts b/arch/arm/boot/dts/axis/artpec6-devboard.dts
new file mode 100644
index 000000000000..042a9cc920c6
--- /dev/null
+++ b/arch/arm/boot/dts/axis/artpec6-devboard.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Axis ARTPEC-6 development board.
+
+/dts-v1/;
+#include "artpec6.dtsi"
+
+/ {
+	model = "ARTPEC-6 development board";
+	compatible = "axis,artpec6-dev-board", "axis,artpec6";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&ethernet {
+	status = "okay";
+
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+
+	mdio {
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		compatible = "snps,dwmac-mdio";
+		phy1: phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			device_type = "ethernet-phy";
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/axis/artpec6.dtsi b/arch/arm/boot/dts/axis/artpec6.dtsi
new file mode 100644
index 000000000000..037157e6c5ee
--- /dev/null
+++ b/arch/arm/boot/dts/axis/artpec6.dtsi
@@ -0,0 +1,388 @@
+/*
+ * Device Tree Source for the Axis ARTPEC-6 SoC
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/dma/nbpfaxi.h>
+#include <dt-bindings/clock/axis,artpec6-clkctrl.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "axis,artpec6";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&pl310>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&pl310>;
+		};
+	};
+
+	syscon: syscon@f8000000 {
+		compatible = "axis,artpec6-syscon", "syscon";
+		reg = <0xf8000000 0x48>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		psci_version = <0x84000000>;
+		cpu_on = <0x84000003>;
+		system_reset = <0x84000009>;
+	};
+
+	scu@faf00000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0xfaf00000 0x58>;
+	};
+
+	/* Main external clock driving CPU and peripherals */
+	ext_clk: ext_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+	};
+
+	eth_phy_ref_clk: eth_phy_ref_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+	};
+
+	clkctrl: clkctrl@f8000000 {
+		#clock-cells = <1>;
+		compatible = "axis,artpec6-clkctrl";
+		reg = <0xf8000000 0x48>;
+		clocks = <&ext_clk>;
+		clock-names = "sys_refclk";
+	};
+
+	gtimer@faf00200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0xfaf00200 0x20>;
+		interrupts = <GIC_PPI 11 0xf01>;
+		clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>;
+	};
+
+	timer@faf00600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0xfaf00600 0x20>;
+		interrupts = <GIC_PPI 13 0xf04>;
+		clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>;
+		status = "disabled";
+	};
+
+	intc: interrupt-controller@faf01000 {
+		interrupt-controller;
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		reg = < 0xfaf01000 0x1000 >, < 0xfaf00100 0x0100 >;
+	};
+
+	pl310: cache-controller@faf10000 {
+		compatible = "arm,pl310-cache";
+		cache-unified;
+		cache-level = <2>;
+		reg = <0xfaf10000 0x1000>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		arm,data-latency = <1 1 1>;
+		arm,tag-latency = <1 1 1>;
+		arm,filter-ranges = <0x0 0x80000000>;
+		arm,double-linefill = <1>;
+		arm,double-linefill-incr = <0>;
+		arm,double-linefill-wrap = <0>;
+		prefetch-data = <1>;
+		prefetch-instr = <1>;
+		arm,prefetch-offset = <0>;
+		arm,prefetch-drop = <1>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	/*
+	 * Both pci nodes cannot be enabled at the same time,
+	 * leave the unwanted node as disabled.
+	 */
+	pcie: pcie@f8050000 {
+		compatible = "axis,artpec6-pcie", "snps,dw-pcie";
+		reg = <0xf8050000 0x2000
+		       0xf8040000 0x1000
+		       0xc0000000 0x2000>;
+		reg-names = "dbi", "phy", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+			  /* downstream I/O */
+		ranges = <0x81000000 0 0 0xc0002000 0 0x00010000
+			  /* non-prefetchable memory */
+			  0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>;
+		num-lanes = <2>;
+		bus-range = <0x00 0xff>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		axis,syscon-pcie = <&syscon>;
+		status = "disabled";
+	};
+
+	pcie_ep: pcie_ep@f8050000 {
+		compatible = "axis,artpec6-pcie-ep", "snps,dw-pcie";
+		reg = <0xf8050000 0x2000
+		       0xf8051000 0x2000
+		       0xf8040000 0x1000
+		       0xc0000000 0x20000000>;
+		reg-names = "dbi", "dbi2", "phy", "addr_space";
+		num-ib-windows = <6>;
+		num-ob-windows = <2>;
+		num-lanes = <2>;
+		axis,syscon-pcie = <&syscon>;
+		status = "disabled";
+	};
+
+	pinctrl: pinctrl@f801d000 {
+		compatible = "axis,artpec6-pinctrl";
+		reg = <0xf801d000 0x400>;
+
+		pinctrl_uart0: uart0grp {
+			function = "uart0";
+			groups = "uart0grp2";
+			bias-pull-up;
+		};
+		pinctrl_uart1: uart1grp {
+			function = "uart1";
+			groups = "uart1grp0";
+			bias-pull-up;
+		};
+		pinctrl_uart2: uart2grp {
+			function = "uart2";
+			groups = "uart2grp1";
+			bias-pull-up;
+		};
+		pinctrl_uart3: uart3grp {
+			function = "uart3";
+			groups = "uart3grp0";
+			bias-pull-up;
+		};
+	};
+
+	amba@0 {
+		compatible = "simple-bus";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		ranges;
+		dma-ranges;
+
+		crypto@f4264000 {
+			compatible = "axis,artpec6-crypto";
+			reg = <0xf4264000 0x4000>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma0: dma@f8019000 {
+			compatible = "renesas,nbpfaxi64dmac8b16";
+			reg = <0xf8019000 0x400>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* error */
+				     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch12",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&clkctrl ARTPEC6_CLK_DMA_ACLK>;
+			#dma-cells = <2>;
+			dma-channels = <8>;
+			dma-requests = <8>;
+		};
+		dma1: dma@f8019400 {
+			compatible = "renesas,nbpfaxi64dmac8b16";
+			reg = <0xf8019400 0x400>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* error */
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch12",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&clkctrl ARTPEC6_CLK_DMA_ACLK>;
+			#dma-cells = <2>;
+			dma-channels = <8>;
+			dma-requests = <8>;
+		};
+
+		ethernet: ethernet@f8010000 {
+			clock-names = "stmmaceth", "ptp_ref";
+			clocks = <&clkctrl ARTPEC6_CLK_ETH_ACLK>,
+				<&clkctrl ARTPEC6_CLK_PTP_REF>;
+			compatible = "snps,dwmac-4.10a", "snps,dwmac";
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_lpi";
+			reg = <0xf8010000 0x4000>;
+
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,mtl-rx-config = <&mtl_rx_setup>;
+			snps,mtl-tx-config = <&mtl_tx_setup>;
+
+			snps,txpbl = <8>;
+			snps,rxpbl = <2>;
+			snps,aal;
+			snps,tso;
+
+			status = "disabled";
+
+			stmmac_axi_setup: stmmac-axi-config {
+				snps,wr_osr_lmt = <1>;
+				snps,rd_osr_lmt = <15>;
+				/* If FB is disabled, the AXI master chooses
+				 * a burst length of any value less than the
+				 * maximum enabled burst length
+				 * (all lesser burst length enables are redundant).
+				 */
+				snps,blen = <0 0 0 0 16 0 0>;
+			};
+
+			mtl_rx_setup: rx-queues-config {
+				snps,rx-queues-to-use = <1>;
+				queue0 {};
+			};
+
+			mtl_tx_setup: tx-queues-config {
+				snps,tx-queues-to-use = <2>;
+				queue0 {};
+				queue1 {};
+			};
+		};
+
+		uart0: serial@f8036000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8036000 0x1000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
+			clock-names = "uart_clk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			dmas = <&dma0 4 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
+			       <&dma0 5 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+		uart1: serial@f8037000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8037000 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
+			clock-names = "uart_clk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			dmas = <&dma0 6 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
+			       <&dma0 7 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+		uart2: serial@f8038000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8038000 0x1000>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
+			clock-names = "uart_clk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			dmas = <&dma1 0 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
+			       <&dma1 1 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+		uart3: serial@f8039000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8039000 0x1000>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
+			clock-names = "uart_clk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			dmas = <&dma1 2 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
+			       <&dma1 3 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/axm5516-amarillo.dts b/arch/arm/boot/dts/axm5516-amarillo.dts
deleted file mode 100644
index a9d60471d9ff..000000000000
--- a/arch/arm/boot/dts/axm5516-amarillo.dts
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * arch/arm/boot/dts/axm5516-amarillo.dts
- *
- * Copyright (C) 2013 LSI
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-/dts-v1/;
-
-/memreserve/ 0x00000000 0x00400000;
-
-#include "axm55xx.dtsi"
-#include "axm5516-cpus.dtsi"
-
-/ {
-	model = "Amarillo AXM5516";
-	compatible = "lsi,axm5516-amarillo", "lsi,axm5516";
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x00000000 0x02 0x00000000>;
-	};
-};
-
-&serial0 {
-	status = "okay";
-};
-
-&serial1 {
-	status = "okay";
-};
-
-&serial2 {
-	status = "okay";
-};
-
-&serial3 {
-	status = "okay";
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
deleted file mode 100644
index bf8c83815753..000000000000
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ /dev/null
@@ -1,471 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clock/bcm-cygnus.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "brcm,cygnus";
-	model = "Broadcom Cygnus SoC";
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x0>;
-		};
-	};
-
-	/include/ "bcm-cygnus-clock.dtsi"
-
-	core {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x19000000 0x1000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		timer@20200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&periph_clk>;
-		};
-
-		gic: interrupt-controller@21000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x21000 0x1000>,
-			      <0x20100 0x100>;
-		};
-
-		L2: l2-cache {
-			compatible = "arm,pl310-cache";
-			reg = <0x22000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-	};
-
-	axi {
-		compatible = "simple-bus";
-		ranges;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		otp: otp@0301c800 {
-			compatible = "brcm,ocotp";
-			reg = <0x0301c800 0x2c>;
-			brcm,ocotp-size = <2048>;
-			status = "disabled";
-		};
-
-		pcie_phy: phy@0301d0a0 {
-			compatible = "brcm,cygnus-pcie-phy";
-			reg = <0x0301d0a0 0x14>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			pcie0_phy: phy@0 {
-				reg = <0>;
-				#phy-cells = <0>;
-			};
-
-			pcie1_phy: phy@1 {
-				reg = <1>;
-				#phy-cells = <0>;
-			};
-		};
-
-		pinctrl: pinctrl@0301d0c8 {
-			compatible = "brcm,cygnus-pinmux";
-			reg = <0x0301d0c8 0x30>,
-			      <0x0301d24c 0x2c>;
-		};
-
-		mailbox: mailbox@03024024 {
-			compatible = "brcm,iproc-mailbox";
-			reg = <0x03024024 0x40>;
-			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			#mbox-cells = <1>;
-		};
-
-		gpio_crmu: gpio@03024800 {
-			compatible = "brcm,cygnus-crmu-gpio";
-			reg = <0x03024800 0x50>,
-			      <0x03024008 0x18>;
-			ngpios = <6>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			interrupt-controller;
-			interrupt-parent = <&mailbox>;
-			interrupts = <0>;
-		};
-
-		mdio: mdio@18002000 {
-			compatible = "brcm,iproc-mdio";
-			reg = <0x18002000 0x8>;
-			#size-cells = <1>;
-			#address-cells = <0>;
-			status = "disabled";
-
-			gphy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-
-			gphy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		switch: switch@18007000 {
-			compatible = "brcm,bcm11360-srab", "brcm,cygnus-srab";
-			reg = <0x18007000 0x1000>;
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					phy-handle = <&gphy0>;
-					phy-mode = "rgmii";
-				};
-
-				port@1 {
-					reg = <1>;
-					phy-handle = <&gphy1>;
-					phy-mode = "rgmii";
-				};
-
-				port@8 {
-					reg = <8>;
-					label = "cpu";
-					ethernet = <&eth0>;
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
-		};
-
-		i2c0: i2c@18008000 {
-			compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
-			reg = <0x18008000 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
-		wdt0: wdt@18009000 {
-			compatible = "arm,sp805" , "arm,primecell";
-			reg = <0x18009000 0x1000>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&axi81_clk>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio_ccm: gpio@1800a000 {
-			compatible = "brcm,cygnus-ccm-gpio";
-			reg = <0x1800a000 0x50>,
-			      <0x0301d164 0x20>;
-			ngpios = <24>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-		};
-
-		i2c1: i2c@1800b000 {
-			compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
-			reg = <0x1800b000 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
-		pcie0: pcie@18012000 {
-			compatible = "brcm,iproc-pcie";
-			reg = <0x18012000 0x1000>;
-
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
-
-			linux,pci-domain = <0>;
-
-			bus-range = <0x00 0xff>;
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			ranges = <0x81000000 0 0	  0x28000000 0 0x00010000
-				  0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
-
-			phys = <&pcie0_phy>;
-			phy-names = "pcie-phy";
-
-			status = "disabled";
-
-			msi-parent = <&msi0>;
-			msi0: msi-controller {
-				compatible = "brcm,iproc-msi";
-				msi-controller;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
-					     <GIC_SPI 97 IRQ_TYPE_NONE>,
-					     <GIC_SPI 98 IRQ_TYPE_NONE>,
-					     <GIC_SPI 99 IRQ_TYPE_NONE>;
-			};
-		};
-
-		pcie1: pcie@18013000 {
-			compatible = "brcm,iproc-pcie";
-			reg = <0x18013000 0x1000>;
-
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
-
-			linux,pci-domain = <1>;
-
-			bus-range = <0x00 0xff>;
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			ranges = <0x81000000 0 0	  0x48000000 0 0x00010000
-				  0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
-
-			phys = <&pcie1_phy>;
-			phy-names = "pcie-phy";
-
-			status = "disabled";
-
-			msi-parent = <&msi1>;
-			msi1: msi-controller {
-				compatible = "brcm,iproc-msi";
-				msi-controller;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 102 IRQ_TYPE_NONE>,
-					     <GIC_SPI 103 IRQ_TYPE_NONE>,
-					     <GIC_SPI 104 IRQ_TYPE_NONE>,
-					     <GIC_SPI 105 IRQ_TYPE_NONE>;
-			};
-		};
-
-		uart0: serial@18020000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x18020000 0x100>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&axi81_clk>;
-			clock-frequency = <100000000>;
-			status = "disabled";
-		};
-
-		uart1: serial@18021000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x18021000 0x100>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&axi81_clk>;
-			clock-frequency = <100000000>;
-			status = "disabled";
-		};
-
-		uart2: serial@18022000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x18020000 0x100>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&axi81_clk>;
-			clock-frequency = <100000000>;
-			status = "disabled";
-		};
-
-		uart3: serial@18023000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x18023000 0x100>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&axi81_clk>;
-			clock-frequency = <100000000>;
-			status = "disabled";
-		};
-
-		eth0: ethernet@18042000 {
-			compatible = "brcm,amac";
-			reg = <0x18042000 0x1000>,
-			      <0x18110000 0x1000>;
-			reg-names = "amac_base", "idm_base";
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		nand: nand@18046000 {
-			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
-			reg = <0x18046000 0x600>, <0xf8105408 0x600>,
-			      <0x18046f00 0x20>;
-			reg-names = "nand", "iproc-idm", "iproc-ext";
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			brcm,nand-has-wp;
-		};
-
-		gpio_asiu: gpio@180a5000 {
-			compatible = "brcm,cygnus-asiu-gpio";
-			reg = <0x180a5000 0x668>;
-			ngpios = <146>;
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			interrupt-controller;
-			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-ranges = <&pinctrl 0 42 1>,
-					<&pinctrl 1 44 3>,
-					<&pinctrl 4 48 1>,
-					<&pinctrl 5 50 3>,
-					<&pinctrl 8 126 1>,
-					<&pinctrl 9 155 1>,
-					<&pinctrl 10 152 1>,
-					<&pinctrl 11 154 1>,
-					<&pinctrl 12 153 1>,
-					<&pinctrl 13 127 3>,
-					<&pinctrl 16 140 1>,
-					<&pinctrl 17 145 7>,
-					<&pinctrl 24 130 10>,
-					<&pinctrl 34 141 4>,
-					<&pinctrl 38 54 1>,
-					<&pinctrl 39 56 3>,
-					<&pinctrl 42 60 3>,
-					<&pinctrl 45 64 3>,
-					<&pinctrl 48 68 2>,
-					<&pinctrl 50 84 6>,
-					<&pinctrl 56 94 6>,
-					<&pinctrl 62 72 1>,
-					<&pinctrl 63 70 1>,
-					<&pinctrl 64 80 1>,
-					<&pinctrl 65 74 3>,
-					<&pinctrl 68 78 1>,
-					<&pinctrl 69 82 1>,
-					<&pinctrl 70 156 17>,
-					<&pinctrl 87 104 12>,
-					<&pinctrl 99 102 2>,
-					<&pinctrl 101 90 4>,
-					<&pinctrl 105 116 6>,
-					<&pinctrl 111 100 2>,
-					<&pinctrl 113 122 4>,
-					<&pinctrl 123 11 1>,
-					<&pinctrl 124 38 4>,
-					<&pinctrl 128 43 1>,
-					<&pinctrl 129 47 1>,
-					<&pinctrl 130 49 1>,
-					<&pinctrl 131 53 1>,
-					<&pinctrl 132 55 1>,
-					<&pinctrl 133 59 1>,
-					<&pinctrl 134 63 1>,
-					<&pinctrl 135 67 1>,
-					<&pinctrl 136 71 1>,
-					<&pinctrl 137 73 1>,
-					<&pinctrl 138 77 1>,
-					<&pinctrl 139 79 1>,
-					<&pinctrl 140 81 1>,
-					<&pinctrl 141 83 1>,
-					<&pinctrl 142 10 1>;
-		};
-
-		ts_adc_syscon: ts_adc_syscon@180a6000 {
-			compatible = "brcm,iproc-ts-adc-syscon", "syscon";
-			reg = <0x180a6000 0xc30>;
-		};
-
-		touchscreen: touchscreen@180a6000 {
-			compatible = "brcm,iproc-touchscreen";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ts_syscon = <&ts_adc_syscon>;
-			clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
-			clock-names = "tsc_clk";
-			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		v3d: v3d@180a2000 {
-			compatible = "brcm,cygnus-v3d";
-			reg = <0x180a2000 0x1000>;
-			clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
-			clock-names = "v3d_clk";
-			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		vc4: gpu {
-			compatible = "brcm,cygnus-vc4";
-		};
-
-		adc: adc@180a6000 {
-			compatible = "brcm,iproc-static-adc";
-			#io-channel-cells = <1>;
-			io-channel-ranges;
-			adc-syscon = <&ts_adc_syscon>;
-			clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
-			clock-names = "tsc_clk";
-			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm21664-garnet.dts b/arch/arm/boot/dts/bcm21664-garnet.dts
deleted file mode 100644
index e87cb26ddf84..000000000000
--- a/arch/arm/boot/dts/bcm21664-garnet.dts
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright (C) 2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "bcm21664.dtsi"
-
-/ {
-	model = "BCM21664 Garnet board";
-	compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
-
-	memory {
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	uart@3e000000 {
-		status = "okay";
-	};
-
-	sdio1: sdio@3f180000 {
-		max-frequency = <48000000>;
-		status = "okay";
-	};
-
-	sdio2: sdio@3f190000 {
-		non-removable;
-		max-frequency = <48000000>;
-		status = "okay";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		max-frequency = <48000000>;
-		cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
-		status = "okay";
-	};
-
-	usbotg: usb@3f120000 {
-		status = "okay";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		status = "okay";
-	};
-};
diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
deleted file mode 100644
index 6dde95f21cef..000000000000
--- a/arch/arm/boot/dts/bcm21664.dtsi
+++ /dev/null
@@ -1,357 +0,0 @@
-/*
- * Copyright (C) 2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#include "dt-bindings/clock/bcm21664.h"
-
-#include "skeleton.dtsi"
-
-/ {
-	model = "BCM21664 SoC";
-	compatible = "brcm,bcm21664";
-	interrupt-parent = <&gic>;
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-	};
-
-       cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			enable-method = "brcm,bcm11351-cpu-method";
-			secondary-boot-reg = <0x35004178>;
-			reg = <1>;
-		};
-	};
-
-	gic: interrupt-controller@3ff00100 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x3ff01000 0x1000>,
-		      <0x3ff00100 0x100>;
-	};
-
-	smc@0x3404e000 {
-		compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
-		reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
-	};
-
-	uart@3e000000 {
-		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e000000 0x118>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
-		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	uart@3e001000 {
-		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e001000 0x118>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
-		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	uart@3e002000 {
-		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e002000 0x118>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	L2: l2-cache {
-		compatible = "arm,pl310-cache";
-		reg = <0x3ff20000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	brcm,resetmgr@35001f00 {
-		compatible = "brcm,bcm21664-resetmgr";
-		reg = <0x35001f00 0x24>;
-	};
-
-	timer@35006000 {
-		compatible = "brcm,kona-timer";
-		reg = <0x35006000 0x1c>;
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
-	};
-
-	gpio: gpio@35003000 {
-		compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio";
-		reg = <0x35003000 0x524>;
-		interrupts =
-		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		interrupt-controller;
-	};
-
-	sdio1: sdio@3f180000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f180000 0x801c>;
-		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
-		status = "disabled";
-	};
-
-	sdio2: sdio@3f190000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f190000 0x801c>;
-		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
-		status = "disabled";
-	};
-
-	sdio3: sdio@3f1a0000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f1a0000 0x801c>;
-		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
-		status = "disabled";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f1b0000 0x801c>;
-		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
-		status = "disabled";
-	};
-
-	i2c@3e016000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e016000 0x70>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
-		status = "disabled";
-	};
-
-	i2c@3e017000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e017000 0x70>;
-		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
-		status = "disabled";
-	};
-
-	i2c@3e018000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e018000 0x70>;
-		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
-		status = "disabled";
-	};
-
-	i2c@3e01c000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e01c000 0x70>;
-		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
-		status = "disabled";
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * Fixed clocks are defined before CCUs whose
-		 * clocks may depend on them.
-		 */
-
-		ref_32k_clk: ref_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		bbl_32k_clk: bbl_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		ref_13m_clk: ref_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		var_13m_clk: var_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		dft_19_5m_clk: dft_19_5m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <19500000>;
-		};
-
-		ref_crystal_clk: ref_crystal {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <26000000>;
-		};
-
-		ref_52m_clk: ref_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		var_52m_clk: var_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		usb_otg_ahb_clk: usb_otg_ahb {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		ref_96m_clk: ref_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		var_96m_clk: var_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		ref_104m_clk: ref_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		var_104m_clk: var_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		ref_156m_clk: ref_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		var_156m_clk: var_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		root_ccu: root_ccu {
-			compatible = BCM21664_DT_ROOT_CCU_COMPAT;
-			reg = <0x35001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "frac_1m";
-		};
-
-		aon_ccu: aon_ccu {
-			compatible = BCM21664_DT_AON_CCU_COMPAT;
-			reg = <0x35002000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "hub_timer";
-		};
-
-		master_ccu: master_ccu {
-			compatible = BCM21664_DT_MASTER_CCU_COMPAT;
-			reg = <0x3f001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "sdio1",
-					     "sdio2",
-					     "sdio3",
-					     "sdio4",
-					     "sdio1_sleep",
-					     "sdio2_sleep",
-					     "sdio3_sleep",
-					     "sdio4_sleep";
-		};
-
-		slave_ccu: slave_ccu {
-			compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
-			reg = <0x3e011000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "uartb",
-					     "uartb2",
-					     "uartb3",
-					     "bsc1",
-					     "bsc2",
-					     "bsc3",
-					     "bsc4";
-		};
-	};
-
-	usbotg: usb@3f120000 {
-		compatible = "snps,dwc2";
-		reg = <0x3f120000 0x10000>;
-		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&usb_otg_ahb_clk>;
-		clock-names = "otg";
-		phys = <&usbphy>;
-		phy-names = "usb2-phy";
-		status = "disabled";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		compatible = "brcm,kona-usb2-phy";
-		reg = <0x3f130000 0x28>;
-		#phy-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/bcm23550.dtsi b/arch/arm/boot/dts/bcm23550.dtsi
deleted file mode 100644
index a7a643f38385..000000000000
--- a/arch/arm/boot/dts/bcm23550.dtsi
+++ /dev/null
@@ -1,415 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2016 Broadcom.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/* BCM23550 and BCM21664 have almost identical clocks */
-#include "dt-bindings/clock/bcm21664.h"
-
-#include "skeleton.dtsi"
-
-/ {
-	model = "BCM23550 SoC";
-	compatible = "brcm,bcm23550";
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0>;
-			clock-frequency = <1000000000>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			enable-method = "brcm,bcm23550";
-			secondary-boot-reg = <0x35004178>;
-			reg = <1>;
-			clock-frequency = <1000000000>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			enable-method = "brcm,bcm23550";
-			secondary-boot-reg = <0x35004178>;
-			reg = <2>;
-			clock-frequency = <1000000000>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			enable-method = "brcm,bcm23550";
-			secondary-boot-reg = <0x35004178>;
-			reg = <3>;
-			clock-frequency = <1000000000>;
-		};
-	};
-
-	/* Hub bus */
-	hub@34000000 {
-		compatible = "simple-bus";
-		ranges = <0 0x34000000 0x102f83ac>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		smc@4e000 {
-			compatible = "brcm,bcm23550-smc", "brcm,kona-smc";
-			reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */
-		};
-
-		resetmgr: reset-controller@1001f00 {
-			compatible = "brcm,bcm21664-resetmgr";
-			reg = <0x01001f00 0x24>;
-		};
-
-		gpio: gpio@1003000 {
-			compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio";
-			reg = <0x01003000 0x524>;
-			interrupts =
-			       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
-				GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
-				GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
-				GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			interrupt-controller;
-		};
-
-		timer@1006000 {
-			compatible = "brcm,kona-timer";
-			reg = <0x01006000 0x1c>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
-		};
-	};
-
-	/* Slaves bus */
-	slaves@3e000000 {
-		compatible = "simple-bus";
-		ranges = <0 0x3e000000 0x0001c070>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		uartb: serial@0 {
-			compatible = "snps,dw-apb-uart";
-			status = "disabled";
-			reg = <0x00000000 0x118>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
-			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-		};
-
-		uartb2: serial@1000 {
-			compatible = "snps,dw-apb-uart";
-			status = "disabled";
-			reg = <0x00001000 0x118>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
-			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-		};
-
-		uartb3: serial@2000 {
-			compatible = "snps,dw-apb-uart";
-			status = "disabled";
-			reg = <0x00002000 0x118>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-		};
-
-		bsc1: i2c@16000 {
-			compatible = "brcm,kona-i2c";
-			reg = <0x00016000 0x70>;
-			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
-			status = "disabled";
-		};
-
-		bsc2: i2c@17000 {
-			compatible = "brcm,kona-i2c";
-			reg = <0x00017000 0x70>;
-			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
-			status = "disabled";
-		};
-
-		bsc3: i2c@18000 {
-			compatible = "brcm,kona-i2c";
-			reg = <0x00018000 0x70>;
-			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
-			status = "disabled";
-		};
-
-		bsc4: i2c@1c000 {
-			compatible = "brcm,kona-i2c";
-			reg = <0x0001c000 0x70>;
-			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
-			status = "disabled";
-		};
-	};
-
-	/* Apps bus */
-	apps@3e300000 {
-		compatible = "simple-bus";
-		ranges = <0 0x3e300000 0x01b77000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		usbotg: usb@e20000 {
-			compatible = "snps,dwc2";
-			reg = <0x00e20000 0x10000>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&usb_otg_ahb_clk>;
-			clock-names = "otg";
-			phys = <&usbphy>;
-			phy-names = "usb2-phy";
-			status = "disabled";
-		};
-
-		usbphy: usb-phy@e30000 {
-			compatible = "brcm,kona-usb2-phy";
-			reg = <0x00e30000 0x28>;
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-
-		sdio1: sdio@e80000 {
-			compatible = "brcm,kona-sdhci";
-			reg = <0x00e80000 0x801c>;
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
-			status = "disabled";
-		};
-
-		sdio2: sdio@e90000 {
-			compatible = "brcm,kona-sdhci";
-			reg = <0x00e90000 0x801c>;
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
-			status = "disabled";
-		};
-
-		sdio3: sdio@ea0000 {
-			compatible = "brcm,kona-sdhci";
-			reg = <0x00ea0000 0x801c>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
-			status = "disabled";
-		};
-
-		sdio4: sdio@eb0000 {
-			compatible = "brcm,kona-sdhci";
-			reg = <0x00eb0000 0x801c>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
-			status = "disabled";
-		};
-
-		cdc: cdc@1b0e000 {
-			compatible = "brcm,bcm23550-cdc";
-			reg = <0x01b0e000 0x78>;
-		};
-
-		gic: interrupt-controller@1b21000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x01b21000 0x1000>,
-			      <0x01b22000 0x1000>;
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * Fixed clocks are defined before CCUs whose
-		 * clocks may depend on them.
-		 */
-
-		ref_32k_clk: ref_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		bbl_32k_clk: bbl_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		ref_13m_clk: ref_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		var_13m_clk: var_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		dft_19_5m_clk: dft_19_5m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <19500000>;
-		};
-
-		ref_crystal_clk: ref_crystal {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <26000000>;
-		};
-
-		ref_52m_clk: ref_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		var_52m_clk: var_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		usb_otg_ahb_clk: usb_otg_ahb {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		ref_96m_clk: ref_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		var_96m_clk: var_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		ref_104m_clk: ref_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		var_104m_clk: var_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		ref_156m_clk: ref_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		var_156m_clk: var_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		root_ccu: root_ccu {
-			compatible = BCM21664_DT_ROOT_CCU_COMPAT;
-			reg = <0x35001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "frac_1m";
-		};
-
-		aon_ccu: aon_ccu {
-			compatible = BCM21664_DT_AON_CCU_COMPAT;
-			reg = <0x35002000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "hub_timer";
-		};
-
-		slave_ccu: slave_ccu {
-			compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
-			reg = <0x3e011000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "uartb",
-					     "uartb2",
-					     "uartb3",
-					     "bsc1",
-					     "bsc2",
-					     "bsc3",
-					     "bsc4";
-		};
-
-		master_ccu: master_ccu {
-			compatible = BCM21664_DT_MASTER_CCU_COMPAT;
-			reg = <0x3f001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "sdio1",
-					     "sdio2",
-					     "sdio3",
-					     "sdio4",
-					     "sdio1_sleep",
-					     "sdio2_sleep",
-					     "sdio3_sleep",
-					     "sdio4_sleep";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
deleted file mode 100644
index 9ce91dd60cb6..000000000000
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (C) 2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "bcm11351.dtsi"
-
-/ {
-	model = "BCM28155 AP board";
-	compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
-
-	memory {
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	uart@3e000000 {
-		status = "okay";
-	};
-
-	i2c@3e016000 {
-		status="okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@3e017000 {
-		status="okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@3e018000 {
-		status="okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@3500d000 {
-		status="okay";
-		clock-frequency = <100000>;
-
-		pmu: pmu@8 {
-			reg = <0x08>;
-		};
-	};
-
-	sdio2: sdio@3f190000 {
-		non-removable;
-		max-frequency = <48000000>;
-		vmmc-supply = <&camldo1_reg>;
-		vqmmc-supply = <&iosr1_reg>;
-		status = "okay";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		max-frequency = <48000000>;
-		cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-		vmmc-supply = <&sdldo_reg>;
-		vqmmc-supply = <&sdxldo_reg>;
-		status = "okay";
-	};
-
-	pwm: pwm@3e01a000 {
-		status = "okay";
-	};
-
-	usbotg: usb@3f120000 {
-		vusb_d-supply = <&usbldo_reg>;
-		vusb_a-supply = <&iosr1_reg>;
-		status = "okay";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		status = "okay";
-	};
-};
-
-#include "bcm59056.dtsi"
-
-&pmu {
-	compatible = "brcm,bcm59056";
-	interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-	regulators {
-		camldo1_reg: camldo1 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		sdldo_reg: sdldo {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		sdxldo_reg: sdxldo {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		usbldo_reg: usbldo {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		iosr1_reg: iosr1 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
deleted file mode 100644
index d0704540db6b..000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ /dev/null
@@ -1,101 +0,0 @@
-/dts-v1/;
-#include "bcm2835.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-
-/ {
-	compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
-	model = "Raspberry Pi Model A+";
-
-	leds {
-		act {
-			gpios = <&gpio 47 0>;
-		};
-
-		pwr {
-			label = "PWR";
-			gpios = <&gpio 35 0>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
-};
-
-&gpio {
-	/*
-	 * This is based on the unreleased schematic for the Model A+.
-	 *
-	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "SDA0",
-			  "SCL0",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "GPIO5",
-			  "GPIO6",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "GPIO12",
-			  "GPIO13",
-			  /* Serial port */
-			  "TXD0",
-			  "RXD0",
-			  "GPIO16",
-			  "GPIO17",
-			  "GPIO18",
-			  "GPIO19",
-			  "GPIO20",
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "GPIO26",
-			  "GPIO27",
-			  "SDA0",
-			  "SCL0",
-			  "NC", /* GPIO30 */
-			  "NC", /* GPIO31 */
-			  "CAM_GPIO1", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "PWR_LOW_N", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "USB_LIMIT", /* GPIO38 */
-			  "NC", /* GPIO39 */
-			  "PWM0_OUT", /* GPIO40 */
-			  "CAM_GPIO0", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
-			  "PWM1_OUT", /* GPIO45 */
-			  "HDMI_HPD_N",
-			  "STATUS_LED",
-			  /* Used by SD Card */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
-
-	/* I2S interface */
-	i2s_alt0: i2s_alt0 {
-		brcm,pins = <18 19 20 21>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-};
-
-&hdmi {
-	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
deleted file mode 100644
index 46d078e29017..000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-/dts-v1/;
-#include "bcm2835.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-
-/ {
-	compatible = "raspberrypi,model-a", "brcm,bcm2835";
-	model = "Raspberry Pi Model A";
-
-	leds {
-		act {
-			gpios = <&gpio 16 1>;
-		};
-	};
-};
-
-&gpio {
-	/*
-	 * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf
-	 * RPI00021 sheet 02
-	 *
-	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "SDA0",
-			  "SCL0",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "CAM_GPIO1",
-			  "LAN_RUN",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "NC", /* GPIO12 */
-			  "NC", /* GPIO13 */
-			  /* Serial port */
-			  "TXD0",
-			  "RXD0",
-			  "STATUS_LED_N",
-			  "GPIO17",
-			  "GPIO18",
-			  "NC", /* GPIO19 */
-			  "NC", /* GPIO20 */
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "NC", /* GPIO26 */
-			  "CAM_GPIO0",
-			  /* Binary number representing build/revision */
-			  "CONFIG0",
-			  "CONFIG1",
-			  "CONFIG2",
-			  "CONFIG3",
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
-			  "PWM0_OUT",
-			  "NC", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
-			  "PWM1_OUT",
-			  "HDMI_HPD_P",
-			  "SD_CARD_DET",
-			  /* Used by SD Card */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
-
-	/* I2S interface */
-	i2s_alt2: i2s_alt2 {
-		brcm,pins = <28 29 30 31>;
-		brcm,function = <BCM2835_FSEL_ALT2>;
-	};
-};
-
-&hdmi {
-	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
deleted file mode 100644
index 432088ebb0a1..000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ /dev/null
@@ -1,103 +0,0 @@
-/dts-v1/;
-#include "bcm2835.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm283x-rpi-smsc9514.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-
-/ {
-	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
-	model = "Raspberry Pi Model B+";
-
-	leds {
-		act {
-			gpios = <&gpio 47 0>;
-		};
-
-		pwr {
-			label = "PWR";
-			gpios = <&gpio 35 0>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
-};
-
-&gpio {
-	/*
-	 * Taken from Raspberry-Pi-B-Plus-V1.2-Schematics.pdf
-	 * RPI-BPLUS sheet 1
-	 *
-	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "SDA0",
-			  "SCL0",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "GPIO5",
-			  "GPIO6",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "GPIO12",
-			  "GPIO13",
-			  /* Serial port */
-			  "TXD0",
-			  "RXD0",
-			  "GPIO16",
-			  "GPIO17",
-			  "GPIO18",
-			  "GPIO19",
-			  "GPIO20",
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "GPIO26",
-			  "GPIO27",
-			  "SDA0",
-			  "SCL0",
-			  "NC", /* GPIO30 */
-			  "LAN_RUN", /* GPIO31 */
-			  "CAM_GPIO1", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "PWR_LOW_N", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "USB_LIMIT", /* GPIO38 */
-			  "NC", /* GPIO39 */
-			  "PWM0_OUT", /* GPIO40 */
-			  "CAM_GPIO0", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "ETHCLK", /* GPIO44 */
-			  "PWM1_OUT", /* GPIO45 */
-			  "HDMI_HPD_N",
-			  "STATUS_LED",
-			  /* Used by SD Card */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
-
-	/* I2S interface */
-	i2s_alt0: i2s_alt0 {
-		brcm,pins = <18 19 20 21>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-};
-
-&hdmi {
-	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
deleted file mode 100644
index 4133bc2cd9be..000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-/dts-v1/;
-#include "bcm2835.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm283x-rpi-smsc9512.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-
-/ {
-	compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
-	model = "Raspberry Pi Model B rev2";
-
-	leds {
-		act {
-			gpios = <&gpio 16 1>;
-		};
-	};
-};
-
-&gpio {
-	/*
-	 * Taken from Raspberry-Pi-Rev-2.0-Model-AB-Schematics.pdf
-	 * RPI00022 sheet 02
-	 *
-	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "SDA0",
-			  "SCL0",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "CAM_CLK",
-			  "LAN_RUN",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "NC", /* GPIO12 */
-			  "NC", /* GPIO13 */
-			  /* Serial port */
-			  "TXD0",
-			  "RXD0",
-			  "STATUS_LED_N",
-			  "GPIO17",
-			  "GPIO18",
-			  "NC", /* GPIO19 */
-			  "NC", /* GPIO20 */
-			  "CAM_GPIO",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "NC", /* GPIO26 */
-			  "GPIO27",
-			  "GPIO28",
-			  "GPIO29",
-			  "GPIO30",
-			  "GPIO31",
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
-			  "PWM0_OUT",
-			  "NC", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
-			  "PWM1_OUT",
-			  "HDMI_HPD_P",
-			  "SD_CARD_DET",
-			  /* Used by SD Card */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
-
-	/* I2S interface */
-	i2s_alt2: i2s_alt2 {
-		brcm,pins = <28 29 30 31>;
-		brcm,function = <BCM2835_FSEL_ALT2>;
-	};
-};
-
-&hdmi {
-	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
deleted file mode 100644
index 4d56fe3006b0..000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ /dev/null
@@ -1,91 +0,0 @@
-/dts-v1/;
-#include "bcm2835.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm283x-rpi-smsc9512.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-
-/ {
-	compatible = "raspberrypi,model-b", "brcm,bcm2835";
-	model = "Raspberry Pi Model B";
-
-	leds {
-		act {
-			gpios = <&gpio 16 1>;
-		};
-	};
-};
-
-&gpio {
-	/*
-	 * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf
-	 * RPI00021 sheet 02
-	 *
-	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "SDA0",
-			  "SCL0",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "CAM_GPIO1",
-			  "LAN_RUN",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "NC", /* GPIO12 */
-			  "NC", /* GPIO13 */
-			  /* Serial port */
-			  "TXD0",
-			  "RXD0",
-			  "STATUS_LED_N",
-			  "GPIO17",
-			  "GPIO18",
-			  "NC", /* GPIO19 */
-			  "NC", /* GPIO20 */
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "NC", /* GPIO26 */
-			  "CAM_GPIO0",
-			  /* Binary number representing build/revision */
-			  "CONFIG0",
-			  "CONFIG1",
-			  "CONFIG2",
-			  "CONFIG3",
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
-			  "PWM0_OUT",
-			  "NC", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
-			  "PWM1_OUT",
-			  "HDMI_HPD_P",
-			  "SD_CARD_DET",
-			  /* Used by SD Card */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-
-	pinctrl-0 = <&gpioout &alt0>;
-};
-
-&hdmi {
-	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
deleted file mode 100644
index 79a20d520931..000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Copyright (C) 2016 Stefan Wahren <stefan.wahren@i2se.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "bcm2835.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm283x-rpi-usb-otg.dtsi"
-
-/ {
-	compatible = "raspberrypi,model-zero", "brcm,bcm2835";
-	model = "Raspberry Pi Zero";
-
-	leds {
-		act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&gpio {
-	/*
-	 * This is based on the official GPU firmware DT blob.
-	 *
-	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "SDA0",
-			  "SCL0",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "GPIO5",
-			  "GPIO6",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "GPIO12",
-			  "GPIO13",
-			  /* Serial port */
-			  "TXD0",
-			  "RXD0",
-			  "GPIO16",
-			  "GPIO17",
-			  "GPIO18",
-			  "GPIO19",
-			  "GPIO20",
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "GPIO26",
-			  "GPIO27",
-			  "SDA0",
-			  "SCL0",
-			  "NC", /* GPIO30 */
-			  "NC", /* GPIO31 */
-			  "CAM_GPIO1", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
-			  "NC", /* GPIO40 */
-			  "CAM_GPIO0", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
-			  "NC", /* GPIO45 */
-			  "HDMI_HPD_N",
-			  "STATUS_LED_N",
-			  /* Used by SD Card */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
-
-	/* I2S interface */
-	i2s_alt0: i2s_alt0 {
-		brcm,pins = <18 19 20 21>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-};
-
-&hdmi {
-	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
deleted file mode 100644
index e55b362b9d6e..000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ /dev/null
@@ -1,108 +0,0 @@
-#include <dt-bindings/power/raspberrypi-power.h>
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0 0x10000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		act {
-			label = "ACT";
-			default-state = "keep";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	soc {
-		firmware: firmware {
-			compatible = "raspberrypi,bcm2835-firmware";
-			mboxes = <&mailbox>;
-		};
-
-		power: power {
-			compatible = "raspberrypi,bcm2835-power";
-			firmware = <&firmware>;
-			#power-domain-cells = <1>;
-		};
-	};
-};
-
-&gpio {
-	pinctrl-names = "default";
-
-	gpioout: gpioout {
-		brcm,pins = <6>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	alt0: alt0 {
-		brcm,pins = <4 5 7 8 9 10 11 14 15>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_gpio0>;
-	status = "okay";
-	clock-frequency = <100000>;
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_gpio2>;
-	status = "okay";
-	clock-frequency = <100000>;
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&sdhci {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_gpio48>;
-	bus-width = <4>;
-};
-
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	status = "okay";
-	bus-width = <4>;
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
-	status = "okay";
-};
-
-&usb {
-	power-domains = <&power RPI_POWER_DOMAIN_USB>;
-};
-
-&v3d {
-	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
-};
-
-&hdmi {
-	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-	status = "okay";
-};
-
-&vec {
-	power-domains = <&power RPI_POWER_DOMAIN_VEC>;
-	status = "okay";
-};
-
-&dsi0 {
-	power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
-};
-
-&dsi1 {
-	power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
-};
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
deleted file mode 100644
index 659b6e9513b1..000000000000
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ /dev/null
@@ -1,35 +0,0 @@
-#include "bcm283x.dtsi"
-
-/ {
-	compatible = "brcm,bcm2835";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,arm1176jzf-s";
-			reg = <0x0>;
-		};
-	};
-
-	soc {
-		ranges = <0x7e000000 0x20000000 0x02000000>;
-		dma-ranges = <0x40000000 0x00000000 0x20000000>;
-
-		arm-pmu {
-			compatible = "arm,arm1176-pmu";
-		};
-	};
-};
-
-&cpu_thermal {
-	coefficients = <(-538)	407000>;
-};
-
-/* enable thermal sensor with the correct compatible property set */
-&thermal {
-	compatible = "brcm,bcm2835-thermal";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
deleted file mode 100644
index bf19e8cfb9e6..000000000000
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ /dev/null
@@ -1,41 +0,0 @@
-/dts-v1/;
-#include "bcm2836.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm283x-rpi-smsc9514.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-
-/ {
-	compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
-	model = "Raspberry Pi 2 Model B";
-
-	memory {
-		reg = <0 0x40000000>;
-	};
-
-	leds {
-		act {
-			gpios = <&gpio 47 0>;
-		};
-
-		pwr {
-			label = "PWR";
-			gpios = <&gpio 35 0>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
-};
-
-&gpio {
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
-
-	/* I2S interface */
-	i2s_alt0: i2s_alt0 {
-		brcm,pins = <18 19 20 21>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-};
-
-&hdmi {
-	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
deleted file mode 100644
index da3deeb42592..000000000000
--- a/arch/arm/boot/dts/bcm2836.dtsi
+++ /dev/null
@@ -1,88 +0,0 @@
-#include "bcm283x.dtsi"
-
-/ {
-	compatible = "brcm,bcm2836";
-
-	soc {
-		ranges = <0x7e000000 0x3f000000 0x1000000>,
-			 <0x40000000 0x40000000 0x00001000>;
-		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
-
-		local_intc: local_intc {
-			compatible = "brcm,bcm2836-l1-intc";
-			reg = <0x40000000 0x100>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&local_intc>;
-		};
-
-		arm-pmu {
-			compatible = "arm,cortex-a7-pmu";
-			interrupt-parent = <&local_intc>;
-			interrupts = <9>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupt-parent = <&local_intc>;
-		interrupts = <0>, // PHYS_SECURE_PPI
-			     <1>, // PHYS_NONSECURE_PPI
-			     <3>, // VIRT_PPI
-			     <2>; // HYP_PPI
-		always-on;
-	};
-
-	cpus: cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		v7_cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0xf00>;
-			clock-frequency = <800000000>;
-		};
-
-		v7_cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0xf01>;
-			clock-frequency = <800000000>;
-		};
-
-		v7_cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0xf02>;
-			clock-frequency = <800000000>;
-		};
-
-		v7_cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0xf03>;
-			clock-frequency = <800000000>;
-		};
-	};
-};
-
-/* Make the BCM2835-style global interrupt controller be a child of the
- * CPU-local interrupt controller.
- */
-&intc {
-	compatible = "brcm,bcm2836-armctrl-ic";
-	reg = <0x7e00b200 0x200>;
-	interrupt-parent = <&local_intc>;
-	interrupts = <8>;
-};
-
-&cpu_thermal {
-	coefficients = <(-538)	407000>;
-};
-
-/* enable thermal sensor with the correct compatible property set */
-&thermal {
-	compatible = "brcm,bcm2836-thermal";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
deleted file mode 100644
index c72a27d908b6..000000000000
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ /dev/null
@@ -1 +0,0 @@
-#include "arm64/broadcom/bcm2837-rpi-3-b.dts"
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
deleted file mode 100644
index 431dcfc900c0..000000000000
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ /dev/null
@@ -1,638 +0,0 @@
-#include <dt-bindings/pinctrl/bcm2835.h>
-#include <dt-bindings/clock/bcm2835.h>
-#include <dt-bindings/clock/bcm2835-aux.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/* firmware-provided startup stubs live here, where the secondary CPUs are
- * spinning.
- */
-/memreserve/ 0x00000000 0x00001000;
-
-/* This include file covers the common peripherals and configuration between
- * bcm2835 and bcm2836 implementations, leaving the CPU configuration to
- * bcm2835.dtsi and bcm2836.dtsi.
- */
-
-/ {
-	compatible = "brcm,bcm2835";
-	model = "BCM2835";
-	interrupt-parent = <&intc>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	chosen {
-		bootargs = "earlyprintk console=ttyAMA0";
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&thermal>;
-
-			trips {
-				cpu-crit {
-					temperature	= <80000>;
-					hysteresis	= <0>;
-					type		= "critical";
-				};
-			};
-
-			cooling-maps {
-			};
-		};
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		timer@7e003000 {
-			compatible = "brcm,bcm2835-system-timer";
-			reg = <0x7e003000 0x1000>;
-			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
-			/* This could be a reference to BCM2835_CLOCK_TIMER,
-			 * but we don't have the driver using the common clock
-			 * support yet.
-			 */
-			clock-frequency = <1000000>;
-		};
-
-		dma: dma@7e007000 {
-			compatible = "brcm,bcm2835-dma";
-			reg = <0x7e007000 0xf00>;
-			interrupts = <1 16>,
-				     <1 17>,
-				     <1 18>,
-				     <1 19>,
-				     <1 20>,
-				     <1 21>,
-				     <1 22>,
-				     <1 23>,
-				     <1 24>,
-				     <1 25>,
-				     <1 26>,
-				     /* dma channel 11-14 share one irq */
-				     <1 27>,
-				     <1 27>,
-				     <1 27>,
-				     <1 27>,
-				     /* unused shared irq for all channels */
-				     <1 28>;
-			interrupt-names = "dma0",
-					  "dma1",
-					  "dma2",
-					  "dma3",
-					  "dma4",
-					  "dma5",
-					  "dma6",
-					  "dma7",
-					  "dma8",
-					  "dma9",
-					  "dma10",
-					  "dma11",
-					  "dma12",
-					  "dma13",
-					  "dma14",
-					  "dma-shared-all";
-			#dma-cells = <1>;
-			brcm,dma-channel-mask = <0x7f35>;
-		};
-
-		intc: interrupt-controller@7e00b200 {
-			compatible = "brcm,bcm2835-armctrl-ic";
-			reg = <0x7e00b200 0x200>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		watchdog@7e100000 {
-			compatible = "brcm,bcm2835-pm-wdt";
-			reg = <0x7e100000 0x28>;
-		};
-
-		clocks: cprman@7e101000 {
-			compatible = "brcm,bcm2835-cprman";
-			#clock-cells = <1>;
-			reg = <0x7e101000 0x2000>;
-
-			/* CPRMAN derives almost everything from the
-			 * platform's oscillator.  However, the DSI
-			 * pixel clocks come from the DSI analog PHY.
-			 */
-			clocks = <&clk_osc>,
-				<&dsi0 0>, <&dsi0 1>, <&dsi0 2>,
-				<&dsi1 0>, <&dsi1 1>, <&dsi1 2>;
-		};
-
-		rng@7e104000 {
-			compatible = "brcm,bcm2835-rng";
-			reg = <0x7e104000 0x10>;
-		};
-
-		mailbox: mailbox@7e00b880 {
-			compatible = "brcm,bcm2835-mbox";
-			reg = <0x7e00b880 0x40>;
-			interrupts = <0 1>;
-			#mbox-cells = <0>;
-		};
-
-		gpio: gpio@7e200000 {
-			compatible = "brcm,bcm2835-gpio";
-			reg = <0x7e200000 0xb4>;
-			/*
-			 * The GPIO IP block is designed for 3 banks of GPIOs.
-			 * Each bank has a GPIO interrupt for itself.
-			 * There is an overall "any bank" interrupt.
-			 * In order, these are GIC interrupts 17, 18, 19, 20.
-			 * Since the BCM2835 only has 2 banks, the 2nd bank
-			 * interrupt output appears to be mirrored onto the
-			 * 3rd bank's interrupt signal.
-			 * So, a bank0 interrupt shows up on 17, 20, and
-			 * a bank1 interrupt shows up on 18, 19, 20!
-			 */
-			interrupts = <2 17>, <2 18>, <2 19>, <2 20>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-
-			/* Defines pin muxing groups according to
-			 * BCM2835-ARM-Peripherals.pdf page 102.
-			 *
-			 * While each pin can have its mux selected
-			 * for various functions individually, some
-			 * groups only make sense to switch to a
-			 * particular function together.
-			 */
-			dpi_gpio0: dpi_gpio0 {
-				brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
-					     12 13 14 15 16 17 18 19
-					     20 21 22 23 24 25 26 27>;
-				brcm,function = <BCM2835_FSEL_ALT2>;
-			};
-			emmc_gpio22: emmc_gpio22 {
-				brcm,pins = <22 23 24 25 26 27>;
-				brcm,function = <BCM2835_FSEL_ALT3>;
-			};
-			emmc_gpio34: emmc_gpio34 {
-				brcm,pins = <34 35 36 37 38 39>;
-				brcm,function = <BCM2835_FSEL_ALT3>;
-				brcm,pull = <BCM2835_PUD_OFF
-					     BCM2835_PUD_UP
-					     BCM2835_PUD_UP
-					     BCM2835_PUD_UP
-					     BCM2835_PUD_UP
-					     BCM2835_PUD_UP>;
-			};
-			emmc_gpio48: emmc_gpio48 {
-				brcm,pins = <48 49 50 51 52 53>;
-				brcm,function = <BCM2835_FSEL_ALT3>;
-			};
-
-			gpclk0_gpio4: gpclk0_gpio4 {
-				brcm,pins = <4>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			gpclk1_gpio5: gpclk1_gpio5 {
-				brcm,pins = <5>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			gpclk1_gpio42: gpclk1_gpio42 {
-				brcm,pins = <42>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			gpclk1_gpio44: gpclk1_gpio44 {
-				brcm,pins = <44>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			gpclk2_gpio6: gpclk2_gpio6 {
-				brcm,pins = <6>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			gpclk2_gpio43: gpclk2_gpio43 {
-				brcm,pins = <43>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-
-			i2c0_gpio0: i2c0_gpio0 {
-				brcm,pins = <0 1>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			i2c0_gpio28: i2c0_gpio28 {
-				brcm,pins = <28 29>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			i2c0_gpio44: i2c0_gpio44 {
-				brcm,pins = <44 45>;
-				brcm,function = <BCM2835_FSEL_ALT1>;
-			};
-			i2c1_gpio2: i2c1_gpio2 {
-				brcm,pins = <2 3>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			i2c1_gpio44: i2c1_gpio44 {
-				brcm,pins = <44 45>;
-				brcm,function = <BCM2835_FSEL_ALT2>;
-			};
-			i2c_slave_gpio18: i2c_slave_gpio18 {
-				brcm,pins = <18 19 20 21>;
-				brcm,function = <BCM2835_FSEL_ALT3>;
-			};
-
-			jtag_gpio4: jtag_gpio4 {
-				brcm,pins = <4 5 6 12 13>;
-				brcm,function = <BCM2835_FSEL_ALT4>;
-			};
-			jtag_gpio22: jtag_gpio22 {
-				brcm,pins = <22 23 24 25 26 27>;
-				brcm,function = <BCM2835_FSEL_ALT4>;
-			};
-
-			pcm_gpio18: pcm_gpio18 {
-				brcm,pins = <18 19 20 21>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			pcm_gpio28: pcm_gpio28 {
-				brcm,pins = <28 29 30 31>;
-				brcm,function = <BCM2835_FSEL_ALT2>;
-			};
-
-			pwm0_gpio12: pwm0_gpio12 {
-				brcm,pins = <12>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			pwm0_gpio18: pwm0_gpio18 {
-				brcm,pins = <18>;
-				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
-			pwm0_gpio40: pwm0_gpio40 {
-				brcm,pins = <40>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			pwm1_gpio13: pwm1_gpio13 {
-				brcm,pins = <13>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			pwm1_gpio19: pwm1_gpio19 {
-				brcm,pins = <19>;
-				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
-			pwm1_gpio41: pwm1_gpio41 {
-				brcm,pins = <41>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			pwm1_gpio45: pwm1_gpio45 {
-				brcm,pins = <45>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-
-			sdhost_gpio48: sdhost_gpio48 {
-				brcm,pins = <48 49 50 51 52 53>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-
-			spi0_gpio7: spi0_gpio7 {
-				brcm,pins = <7 8 9 10 11>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			spi0_gpio35: spi0_gpio35 {
-				brcm,pins = <35 36 37 38 39>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			spi1_gpio16: spi1_gpio16 {
-				brcm,pins = <16 17 18 19 20 21>;
-				brcm,function = <BCM2835_FSEL_ALT4>;
-			};
-			spi2_gpio40: spi2_gpio40 {
-				brcm,pins = <40 41 42 43 44 45>;
-				brcm,function = <BCM2835_FSEL_ALT4>;
-			};
-
-			uart0_gpio14: uart0_gpio14 {
-				brcm,pins = <14 15>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			/* Separate from the uart0_gpio14 group
-			 * because it conflicts with spi1_gpio16, and
-			 * people often run uart0 on the two pins
-			 * without flow control.
-			 */
-			uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 {
-				brcm,pins = <16 17>;
-				brcm,function = <BCM2835_FSEL_ALT3>;
-			};
-			uart0_ctsrts_gpio30: uart0_ctsrts_gpio30 {
-				brcm,pins = <30 31>;
-				brcm,function = <BCM2835_FSEL_ALT3>;
-			};
-			uart0_gpio32: uart0_gpio32 {
-				brcm,pins = <32 33>;
-				brcm,function = <BCM2835_FSEL_ALT3>;
-			};
-			uart0_gpio36: uart0_gpio36 {
-				brcm,pins = <36 37>;
-				brcm,function = <BCM2835_FSEL_ALT2>;
-			};
-			uart0_ctsrts_gpio38: uart0_ctsrts_gpio38 {
-				brcm,pins = <38 39>;
-				brcm,function = <BCM2835_FSEL_ALT2>;
-			};
-
-			uart1_gpio14: uart1_gpio14 {
-				brcm,pins = <14 15>;
-				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
-			uart1_ctsrts_gpio16: uart1_ctsrts_gpio16 {
-				brcm,pins = <16 17>;
-				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
-			uart1_gpio32: uart1_gpio32 {
-				brcm,pins = <32 33>;
-				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
-			uart1_ctsrts_gpio30: uart1_ctsrts_gpio30 {
-				brcm,pins = <30 31>;
-				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
-			uart1_gpio40: uart1_gpio40 {
-				brcm,pins = <40 41>;
-				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
-			uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 {
-				brcm,pins = <42 43>;
-				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
-		};
-
-		uart0: serial@7e201000 {
-			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
-			reg = <0x7e201000 0x1000>;
-			interrupts = <2 25>;
-			clocks = <&clocks BCM2835_CLOCK_UART>,
-				 <&clocks BCM2835_CLOCK_VPU>;
-			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
-		};
-
-		sdhost: mmc@7e202000 {
-			compatible = "brcm,bcm2835-sdhost";
-			reg = <0x7e202000 0x100>;
-			interrupts = <2 24>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			dmas = <&dma 13>;
-			dma-names = "rx-tx";
-			status = "disabled";
-		};
-
-		i2s: i2s@7e203000 {
-			compatible = "brcm,bcm2835-i2s";
-			reg = <0x7e203000 0x20>,
-			      <0x7e101098 0x02>;
-
-			dmas = <&dma 2>,
-			       <&dma 3>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		spi: spi@7e204000 {
-			compatible = "brcm,bcm2835-spi";
-			reg = <0x7e204000 0x1000>;
-			interrupts = <2 22>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@7e205000 {
-			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e205000 0x1000>;
-			interrupts = <2 21>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		pixelvalve@7e206000 {
-			compatible = "brcm,bcm2835-pixelvalve0";
-			reg = <0x7e206000 0x100>;
-			interrupts = <2 13>; /* pwa0 */
-		};
-
-		pixelvalve@7e207000 {
-			compatible = "brcm,bcm2835-pixelvalve1";
-			reg = <0x7e207000 0x100>;
-			interrupts = <2 14>; /* pwa1 */
-		};
-
-		dsi0: dsi@7e209000 {
-			compatible = "brcm,bcm2835-dsi0";
-			reg = <0x7e209000 0x78>;
-			interrupts = <2 4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#clock-cells = <1>;
-
-			clocks = <&clocks BCM2835_PLLA_DSI0>,
-				 <&clocks BCM2835_CLOCK_DSI0E>,
-				 <&clocks BCM2835_CLOCK_DSI0P>;
-			clock-names = "phy", "escape", "pixel";
-
-			clock-output-names = "dsi0_byte",
-					     "dsi0_ddr2",
-					     "dsi0_ddr";
-
-		};
-
-		thermal: thermal@7e212000 {
-			compatible = "brcm,bcm2835-thermal";
-			reg = <0x7e212000 0x8>;
-			clocks = <&clocks BCM2835_CLOCK_TSENS>;
-			#thermal-sensor-cells = <0>;
-			status = "disabled";
-		};
-
-		aux: aux@0x7e215000 {
-			compatible = "brcm,bcm2835-aux";
-			#clock-cells = <1>;
-			reg = <0x7e215000 0x8>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-		};
-
-		uart1: serial@7e215040 {
-			compatible = "brcm,bcm2835-aux-uart";
-			reg = <0x7e215040 0x40>;
-			interrupts = <1 29>;
-			clocks = <&aux BCM2835_AUX_CLOCK_UART>;
-			status = "disabled";
-		};
-
-		spi1: spi@7e215080 {
-			compatible = "brcm,bcm2835-aux-spi";
-			reg = <0x7e215080 0x40>;
-			interrupts = <1 29>;
-			clocks = <&aux BCM2835_AUX_CLOCK_SPI1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi2: spi@7e2150c0 {
-			compatible = "brcm,bcm2835-aux-spi";
-			reg = <0x7e2150c0 0x40>;
-			interrupts = <1 29>;
-			clocks = <&aux BCM2835_AUX_CLOCK_SPI2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		pwm: pwm@7e20c000 {
-			compatible = "brcm,bcm2835-pwm";
-			reg = <0x7e20c000 0x28>;
-			clocks = <&clocks BCM2835_CLOCK_PWM>;
-			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
-			assigned-clock-rates = <10000000>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		sdhci: sdhci@7e300000 {
-			compatible = "brcm,bcm2835-sdhci";
-			reg = <0x7e300000 0x100>;
-			interrupts = <2 30>;
-			clocks = <&clocks BCM2835_CLOCK_EMMC>;
-			status = "disabled";
-		};
-
-		hvs@7e400000 {
-			compatible = "brcm,bcm2835-hvs";
-			reg = <0x7e400000 0x6000>;
-			interrupts = <2 1>;
-		};
-
-		dsi1: dsi@7e700000 {
-			compatible = "brcm,bcm2835-dsi1";
-			reg = <0x7e700000 0x8c>;
-			interrupts = <2 12>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#clock-cells = <1>;
-
-			clocks = <&clocks BCM2835_PLLD_DSI1>,
-				 <&clocks BCM2835_CLOCK_DSI1E>,
-				 <&clocks BCM2835_CLOCK_DSI1P>;
-			clock-names = "phy", "escape", "pixel";
-
-			clock-output-names = "dsi1_byte",
-					     "dsi1_ddr2",
-					     "dsi1_ddr";
-
-			status = "disabled";
-		};
-
-		i2c1: i2c@7e804000 {
-			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e804000 0x1000>;
-			interrupts = <2 21>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@7e805000 {
-			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e805000 0x1000>;
-			interrupts = <2 21>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		vec: vec@7e806000 {
-			compatible = "brcm,bcm2835-vec";
-			reg = <0x7e806000 0x1000>;
-			clocks = <&clocks BCM2835_CLOCK_VEC>;
-			interrupts = <2 27>;
-			status = "disabled";
-		};
-
-		pixelvalve@7e807000 {
-			compatible = "brcm,bcm2835-pixelvalve2";
-			reg = <0x7e807000 0x100>;
-			interrupts = <2 10>; /* pixelvalve */
-		};
-
-		hdmi: hdmi@7e902000 {
-			compatible = "brcm,bcm2835-hdmi";
-			reg = <0x7e902000 0x600>,
-			      <0x7e808000 0x100>;
-			interrupts = <2 8>, <2 9>;
-			ddc = <&i2c2>;
-			clocks = <&clocks BCM2835_PLLH_PIX>,
-				 <&clocks BCM2835_CLOCK_HSM>;
-			clock-names = "pixel", "hdmi";
-			dmas = <&dma 17>;
-			dma-names = "audio-rx";
-			status = "disabled";
-		};
-
-		usb: usb@7e980000 {
-			compatible = "brcm,bcm2835-usb";
-			reg = <0x7e980000 0x10000>;
-			interrupts = <1 9>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clk_usb>;
-			clock-names = "otg";
-			phys = <&usbphy>;
-			phy-names = "usb2-phy";
-		};
-
-		v3d: v3d@7ec00000 {
-			compatible = "brcm,bcm2835-v3d";
-			reg = <0x7ec00000 0x1000>;
-			interrupts = <1 10>;
-		};
-
-		vc4: gpu {
-			compatible = "brcm,bcm2835-vc4";
-		};
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* The oscillator is the root of the clock tree. */
-		clk_osc: clock@3 {
-			compatible = "fixed-clock";
-			reg = <3>;
-			#clock-cells = <0>;
-			clock-output-names = "osc";
-			clock-frequency = <19200000>;
-		};
-
-		clk_usb: clock@4 {
-			compatible = "fixed-clock";
-			reg = <4>;
-			#clock-cells = <0>;
-			clock-output-names = "otg";
-			clock-frequency = <480000000>;
-		};
-	};
-
-	usbphy: phy {
-		compatible = "usb-nop-xceiv";
-	};
-};
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
deleted file mode 100644
index 4175174e589a..000000000000
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Asus RT-AC56U
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "asus,rt-ac56u", "brcm,bcm4708";
-	model = "Asus RT-AC56U (BCM4708)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		usb3 {
-			label = "bcm53xx:blue:usb3";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-		};
-
-		wan {
-			label = "bcm53xx:blue:wan";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-		};
-
-		lan {
-			label = "bcm53xx:blue:lan";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-		};
-
-		power {
-			label = "bcm53xx:blue:power";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		all {
-			label = "bcm53xx:blue:all";
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		2ghz {
-			label = "bcm53xx:blue:2ghz";
-			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-		};
-
-
-		usb2 {
-			label = "bcm53xx:blue:usb2";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rfkill {
-			label = "WiFi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-
-		wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
deleted file mode 100644
index 8fa033fea959..000000000000
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Asus RT-AC68U
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "asus,rt-ac68u", "brcm,bcm4708";
-	model = "Asus RT-AC68U (BCM4708)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		usb2 {
-			label = "bcm53xx:blue:usb2";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-		};
-
-		power {
-			label = "bcm53xx:blue:power";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		logo {
-			label = "bcm53xx:white:logo";
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		usb3 {
-			label = "bcm53xx:blue:usb3";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		brightness {
-			label = "Backlight";
-			linux,code = <KEY_BRIGHTNESS_ZERO>;
-			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-		};
-
-		wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-
-		rfkill {
-			label = "WiFi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
deleted file mode 100644
index 126ab5867772..000000000000
--- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "linksys,ea6300-v1", "brcm,bcm4708";
-	model = "Linksys EA6300 V1";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
deleted file mode 100644
index f591b0f256d8..000000000000
--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright 2016 Luxul Inc.
- *
- * Licensed under the ISC license.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-
-/ {
-	compatible = "luxul,xap-1510v1", "brcm,bcm4708";
-	model = "Luxul XAP-1510 V1";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		5ghz {
-			label = "bcm53xx:blue:5ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		2ghz {
-			label = "bcm53xx:blue:2ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
deleted file mode 100644
index 50d65d8fbd9a..000000000000
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Luxul XWC-1000
- *
- * Copyright 2014 Luxul Inc.
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "luxul,xwc-1000", "brcm,bcm4708";
-	model = "Luxul XWC-1000 (BCM4708)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000>;
-	};
-
-	nand: nand@18028000 {
-		nandcs@0 {
-			partition@0 {
-				label = "ubi";
-				reg = <0x00000000 0x08000000>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
deleted file mode 100644
index a5647efe4118..000000000000
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X arm platform code.
- * DTS for Netgear R6250 V1
- *
- * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "netgear,r6250v1", "brcm,bcm4708";
-	model = "Netgear R6250 V1 (BCM4708)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		logo {
-			label = "bcm53xx:white:logo";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		power0 {
-			label = "bcm53xx:green:power";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		power1 {
-			label = "bcm53xx:amber:power";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		usb {
-			label = "bcm53xx:blue:usb";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-		};
-
-		wireless {
-			label = "bcm53xx:blue:wireless";
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-		};
-
-		rfkill {
-			label = "WiFi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-		};
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-};
-
-&spi_nor {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
deleted file mode 100644
index bb66cebe0bd8..000000000000
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Netgear R6300 V2
- *
- * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "netgear,r6300v2", "brcm,bcm4708";
-	model = "Netgear R6300 V2 (BCM4708)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		logo {
-			label = "bcm53xx:white:logo";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		power0 {
-			label = "bcm53xx:green:power";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-		};
-
-		power1 {
-			label = "bcm53xx:amber:power";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		usb {
-			label = "bcm53xx:blue:usb";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-		};
-
-		wireless {
-			label = "bcm53xx:blue:wireless";
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-		};
-
-		rfkill {
-			label = "WiFi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-		};
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
deleted file mode 100644
index 19ee924d7d53..000000000000
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X arm platform code.
- * DTS for SmartRG SR400ac
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "smartrg,sr400ac", "brcm,bcm4708";
-	model = "SmartRG SR400ac";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power-white {
-			label = "bcm53xx:white:power";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		power-amber {
-			label = "bcm53xx:amber:power";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb2 {
-			label = "bcm53xx:white:usb2";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb3-white {
-			label = "bcm53xx:white:usb3";
-			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb3-green {
-			label = "bcm53xx:green:usb3";
-			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		wps {
-			label = "bcm53xx:white:wps";
-			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-		};
-
-		status-red {
-			label = "bcm53xx:red:status";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		status-green {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		status-blue {
-			label = "bcm53xx:blue:status";
-			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan-white {
-			label = "bcm53xx:white:wan";
-			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan-red {
-			label = "bcm53xx:red:wan";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rfkill {
-			label = "WiFi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-		};
-
-		wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			label = "lan4";
-		};
-
-		port@1 {
-			reg = <1>;
-			label = "lan3";
-		};
-
-		port@2 {
-			reg = <2>;
-			label = "lan2";
-		};
-
-		port@3 {
-			reg = <3>;
-			label = "lan1";
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "wan";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
deleted file mode 100644
index 0800a964f2fe..000000000000
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Asus RT-N18U
- *
- * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "bcm47081.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "asus,rt-n18u", "brcm,bcm47081", "brcm,bcm4708";
-	model = "Asus RT-N18U (BCM47081)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power {
-			label = "bcm53xx:blue:power";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		usb2 {
-			label = "bcm53xx:blue:usb2";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		wan {
-			label = "bcm53xx:blue:wan";
-			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		lan {
-			label = "bcm53xx:blue:lan";
-			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		usb3 {
-			label = "bcm53xx:blue:usb3";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-
-		wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
deleted file mode 100644
index c2af33eb47de..000000000000
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Buffalo WZR-600DHP2
- *
- * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "bcm47081.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "buffalo,wzr-600dhp2", "brcm,bcm47081", "brcm,bcm4708";
-	model = "Buffalo WZR-600DHP2 (BCM47081)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
-	};
-
-	spi {
-		compatible = "spi-gpio";
-		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 7 0>;
-		gpio-mosi = <&chipcommon 4 0>;
-		cs-gpios = <&chipcommon 6 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hc595: gpio_spi@0 {
-			compatible = "fairchild,74hc595";
-			reg = <0>;
-			registers-number = <1>;
-			spi-max-frequency = <100000>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power0 {
-			label = "bcm53xx:green:power";
-			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		power1 {
-			label = "bcm53xx:red:power";
-			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		router0 {
-			label = "bcm53xx:green:router";
-			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		router1 {
-			label = "bcm53xx:amber:router";
-			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan {
-			label = "bcm53xx:green:wan";
-			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		wireless0 {
-			label = "bcm53xx:green:wireless";
-			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
-		};
-
-		wireless1 {
-			label = "bcm53xx:amber:wireless";
-			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		aoss {
-			label = "AOSS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
-		};
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-
-		/* Switch device mode? */
-		mode {
-			label = "Mode";
-			linux,code = <KEY_SETUP>;
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-
-		eject {
-			label = "USB eject";
-			linux,code = <KEY_EJECTCD>;
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
deleted file mode 100644
index 8bef6429feee..000000000000
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Buffalo WZR-900DHP
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "bcm47081.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "buffalo,wzr-900dhp", "brcm,bcm47081", "brcm,bcm4708";
-	model = "Buffalo WZR-900DHP (BCM47081)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
deleted file mode 100644
index 9b5759849983..000000000000
--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright 2017 Luxul Inc.
- *
- * Licensed under the ISC license.
- */
-
-/dts-v1/;
-
-#include "bcm47081.dtsi"
-
-/ {
-	compatible = "luxul,xap-1410v1", "brcm,bcm47081", "brcm,bcm4708";
-	model = "Luxul XAP-1410 V1";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		5ghz {
-			label = "bcm53xx:blue:5ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		2ghz {
-			label = "bcm53xx:blue:2ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
deleted file mode 100644
index c544ab302012..000000000000
--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * Copyright 2017 Luxul Inc.
- *
- * Licensed under the ISC license.
- */
-
-/dts-v1/;
-
-#include "bcm47081.dtsi"
-#include "bcm5301x-nand-cs0-bch4.dtsi"
-
-/ {
-	compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708";
-	model = "Luxul XWR-1200 V1";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power {
-			label = "bcm53xx:green:power";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		lan3 {
-			label = "bcm53xx:green:lan3";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		lan4 {
-			label = "bcm53xx:green:lan4";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		wan {
-			label = "bcm53xx:green:wan";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		lan2 {
-			label = "bcm53xx:green:lan2";
-			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		usb {
-			label = "bcm53xx:green:usb";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-
-		2ghz {
-			label = "bcm53xx:green:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		5ghz {
-			label = "bcm53xx:green:5ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		lan1 {
-			label = "bcm53xx:green:lan1";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb2 {
-	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-};
-
-&spi_nor {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
deleted file mode 100644
index a854a5174b7f..000000000000
--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
- */
-
-/dts-v1/;
-
-#include "bcm47081.dtsi"
-
-/ {
-	compatible = "tplink,archer-c5-v2", "brcm,bcm47081", "brcm,bcm4708";
-	model = "TP-LINK Archer C5 V2";
-
-	chosen {
-		bootargs = "earlycon";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		2ghz {
-			label = "bcm53xx:green:2ghz";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		lan {
-			label = "bcm53xx:green:lan";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb2-port1 {
-			label = "bcm53xx:green:usb2-port1";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		power {
-			label = "bcm53xx:green:power";
-			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		wan-green {
-			label = "bcm53xx:green:wan";
-			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		wps {
-			label = "bcm53xx:green:wps";
-			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan-amber {
-			label = "bcm53xx:amber:wan";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		5ghz {
-			label = "bcm53xx:green:5ghz";
-			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb2-port2 {
-			label = "bcm53xx:green:usb2-port2";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rfkill {
-			label = "WiFi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&usb2 {
-	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-};
diff --git a/arch/arm/boot/dts/bcm47081.dtsi b/arch/arm/boot/dts/bcm47081.dtsi
deleted file mode 100644
index 9829d044aaf4..000000000000
--- a/arch/arm/boot/dts/bcm47081.dtsi
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for BCM47081 SoC.
- *
- * Copyright © 2014 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "bcm5301x.dtsi"
-
-/ {
-	compatible = "brcm,bcm47081";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x0>;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
deleted file mode 100644
index df473cc41572..000000000000
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Asus RT-AC87U
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "bcm4709.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "asus,rt-ac87u", "brcm,bcm4709", "brcm,bcm4708";
-	model = "Asus RT-AC87U";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		wps {
-			label = "bcm53xx:blue:wps";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-		};
-
-		power {
-			label = "bcm53xx:blue:power";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		wan {
-			label = "bcm53xx:red:wan";
-			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-		};
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
deleted file mode 100644
index 3d1d9c2c4efc..000000000000
--- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
- */
-
-/dts-v1/;
-
-#include "bcm4709.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "linksys,ea9200", "brcm,bcm4709", "brcm,bcm4708";
-	model = "Linksys EA9200";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
deleted file mode 100644
index f43ab4721456..000000000000
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Netgear R7000
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "bcm4709.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "netgear,r7000", "brcm,bcm4709", "brcm,bcm4708";
-	model = "Netgear R7000";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power-white {
-			label = "bcm53xx:white:power";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		power-amber {
-			label = "bcm53xx:amber:power";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		5ghz {
-			label = "bcm53xx:white:5ghz";
-			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-		};
-
-		2ghz {
-			label = "bcm53xx:white:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		wps {
-			label = "bcm53xx:white:wps";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
-		};
-
-		wireless {
-			label = "bcm53xx:white:wireless";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb3 {
-			label = "bcm53xx:white:usb3";
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-
-		usb2 {
-			label = "bcm53xx:white:usb2";
-			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-		};
-
-		rfkill {
-			label = "WiFi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-		};
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb2 {
-	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
deleted file mode 100644
index d266131652ad..000000000000
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Netgear R8000
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "bcm4709.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "netgear,r8000", "brcm,bcm4709", "brcm,bcm4708";
-	model = "Netgear R8000 (BCM4709)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power-white {
-			label = "bcm53xx:white:power";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		power-amber {
-			label = "bcm53xx:amber:power";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		wan-white {
-			label = "bcm53xx:white:wan";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		wan-amber {
-			label = "bcm53xx:amber:wan";
-			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		5ghz-1 {
-			label = "bcm53xx:white:5ghz-1";
-			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-		};
-
-		2ghz {
-			label = "bcm53xx:white:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		wireless {
-			label = "bcm53xx:white:wireless";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
-		};
-
-		wps {
-			label = "bcm53xx:white:wps";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-		};
-
-		5ghz-2 {
-			label = "bcm53xx:white:5ghz-2";
-			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
-		};
-
-		usb3 {
-			label = "bcm53xx:white:usb3";
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-
-		usb2 {
-			label = "bcm53xx:white:usb2";
-			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rfkill {
-			label = "WiFi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-		};
-
-		wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-		};
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-		};
-
-		brightness {
-			label = "Backlight";
-			linux,code = <KEY_BRIGHTNESS_ZERO>;
-			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pcie0 {
-	#address-cells = <3>;
-	#size-cells = <2>;
-
-	bridge@0,0,0 {
-		reg = <0x0000 0 0 0 0>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-
-		wifi@0,1,0 {
-			reg = <0x0000 0 0 0 0>;
-			ieee80211-freq-limit = <5735000 5835000>;
-		};
-	};
-};
-
-&pcie1 {
-	#address-cells = <3>;
-	#size-cells = <2>;
-
-	bridge@1,0,0 {
-		reg = <0x0000 0 0 0 0>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-
-		bridge@1,1,0 {
-			reg = <0x0000 0 0 0 0>;
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bridge@1,2,2 {
-				reg = <0x1000 0 0 0 0>;
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-
-				wifi@1,4,0 {
-					reg = <0x0000 0 0 0 0>;
-					ieee80211-freq-limit = <5170000 5730000>;
-				};
-			};
-		};
-	};
-};
-
-&usb2 {
-	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-};
diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
deleted file mode 100644
index 97aa5d59a1d8..000000000000
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
- */
-
-/dts-v1/;
-
-#include "bcm4709.dtsi"
-
-/ {
-	compatible = "tplink,archer-c9-v1", "brcm,bcm4709", "brcm,bcm4708";
-	model = "TP-LINK Archer C9 V1";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		lan {
-			label = "bcm53xx:blue:lan";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		wps {
-			label = "bcm53xx:blue:wps";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		2ghz {
-			label = "bcm53xx:blue:2ghz";
-			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-		};
-
-		5ghz {
-			label = "bcm53xx:blue:5ghz";
-			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb3 {
-			label = "bcm53xx:blue:usb3";
-			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb2 {
-			label = "bcm53xx:blue:usb2";
-			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan-blue {
-			label = "bcm53xx:blue:wan";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
-		};
-
-		wan-amber {
-			label = "bcm53xx:amber:wan";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-		};
-
-		power {
-			label = "bcm53xx:blue:power";
-			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-		};
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb2 {
-	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-};
-
-&spi_nor {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4709.dtsi b/arch/arm/boot/dts/bcm4709.dtsi
deleted file mode 100644
index c645fea2b7f7..000000000000
--- a/arch/arm/boot/dts/bcm4709.dtsi
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
- */
-
-#include "bcm4708.dtsi"
-
-&uart0 {
-	clock-frequency = <125000000>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
deleted file mode 100644
index 51b0641b5f79..000000000000
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for D-Link DIR-885L
- *
- * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-#include "bcm5301x-nand-cs0-bch1.dtsi"
-
-/ {
-	compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
-	model = "D-Link DIR-885L";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
-	};
-
-	nand: nand@18028000 {
-		nandcs@0 {
-			partition@0 {
-				label = "firmware";
-				reg = <0x00000000 0x08000000>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power-white {
-			label = "bcm53xx:white:power";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		wan-white {
-			label = "bcm53xx:white:wan";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-		};
-
-		power-amber {
-			label = "bcm53xx:amber:power";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-		};
-
-		wan-amber {
-			label = "bcm53xx:amber:wan";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		usb3-white {
-			label = "bcm53xx:white:usb3";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-		};
-
-		2ghz {
-			label = "bcm53xx:white:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		5ghz {
-			label = "bcm53xx:white:5ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-
-		/* Switch: router / extender */
-		extender {
-			label = "Extender";
-			linux,code = <BTN_0>;
-			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-		};
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-};
-
-&spi_nor {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
deleted file mode 100644
index b6750f70dffb..000000000000
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "linksys,panamera", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Linksys EA9500";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
deleted file mode 100644
index 5f8621d00c50..000000000000
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Copyright 2016 Luxul Inc.
- *
- * Licensed under the ISC license.
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-#include "bcm5301x-nand-cs0-bch4.dtsi"
-
-/ {
-	compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Luxul XWR-3100 V1";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power	{
-			label = "bcm53xx:green:power";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		lan3	{
-			label = "bcm53xx:green:lan3";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-		};
-
-		lan4	{
-			label = "bcm53xx:green:lan4";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-		};
-
-		wan	{
-			label = "bcm53xx:green:wan";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		lan1	{
-			label = "bcm53xx:green:lan1";
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-		};
-
-		lan2	{
-			label = "bcm53xx:green:lan2";
-			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-		};
-
-		usb3	{
-			label = "bcm53xx:green:usb3";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-		};
-
-		status	{
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-
-		2ghz {
-			label = "bcm53xx:green:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		5ghz {
-			label = "bcm53xx:green:5ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-};
-
-&spi_nor {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi
deleted file mode 100644
index 4840a782fc05..000000000000
--- a/arch/arm/boot/dts/bcm47094.dtsi
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
- */
-
-#include "bcm4708.dtsi"
-
-/ {
-	usb3_phy: usb3-phy {
-		compatible = "brcm,ns-bx-usb3-phy";
-	};
-};
-
-&uart0 {
-	clock-frequency = <125000000>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
deleted file mode 100644
index 34417dac1cd0..000000000000
--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
- */
-
-/dts-v1/;
-
-#include "bcm53573.dtsi"
-
-/ {
-	compatible = "tenda,ac9", "brcm,bcm47189", "brcm,bcm53573";
-	model = "Tenda AC9";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		usb {
-			label = "bcm53xx:blue:usb";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		wps {
-			label = "bcm53xx:blue:wps";
-			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
-		};
-
-		5ghz {
-			label = "bcm53xx:blue:5ghz";
-			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-		};
-
-		system {
-			label = "bcm53xx:blue:system";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	pcie0_leds {
-		compatible = "gpio-leds";
-
-		2ghz {
-			label = "bcm53xx:blue:2ghz";
-			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rfkill {
-			label = "WiFi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-
-		wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pcie0 {
-	ranges = <0x00000000 0 0 0 0 0x00100000>;
-	#address-cells = <3>;
-	#size-cells = <2>;
-
-	bridge@0,0,0 {
-		reg = <0x0000 0 0 0 0>;
-		ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-
-		wifi@0,1,0 {
-			reg = <0x0000 0 0 0 0>;
-			ranges = <0x00000000 0 0 0 0x00100000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			pcie0_chipcommon: chipcommon@0 {
-				reg = <0 0x1000>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
deleted file mode 100644
index 168495106b82..000000000000
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Broadcom Northstar NAND.
- *
- * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-/ {
-	nand@18028000 {
-		nandcs: nandcs@0 {
-			compatible = "brcm,nandcs";
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
deleted file mode 100644
index 98647d22b291..000000000000
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ /dev/null
@@ -1,449 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
- * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
- *
- * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-#include <dt-bindings/clock/bcm-nsp.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&gic>;
-
-	chipcommonA {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x18000000 0x00001000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		uart0: serial@0300 {
-			compatible = "ns16550";
-			reg = <0x0300 0x100>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&iprocslow>;
-			status = "disabled";
-		};
-
-		uart1: serial@0400 {
-			compatible = "ns16550";
-			reg = <0x0400 0x100>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&iprocslow>;
-			status = "disabled";
-		};
-	};
-
-	mpcore {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x19000000 0x00023000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		a9pll: arm_clk@00000 {
-			#clock-cells = <0>;
-			compatible = "brcm,nsp-armpll";
-			clocks = <&osc>;
-			reg = <0x00000 0x1000>;
-		};
-
-		scu@20000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0x20000 0x100>;
-		};
-
-		timer@20200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&periph_clk>;
-		};
-
-		timer@20600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x20600 0x20>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_EDGE_RISING)>;
-			clocks = <&periph_clk>;
-		};
-
-		watchdog@20620 {
-			compatible = "arm,cortex-a9-twd-wdt";
-			reg = <0x20620 0x20>;
-			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_EDGE_RISING)>;
-			clocks = <&periph_clk>;
-		};
-
-		gic: interrupt-controller@21000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x21000 0x1000>,
-			      <0x20100 0x100>;
-		};
-
-		L2: cache-controller@22000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x22000 0x1000>;
-			cache-unified;
-			arm,shared-override;
-			prefetch-data = <1>;
-			prefetch-instr = <1>;
-			cache-level = <2>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts =
-			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		osc: oscillator {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <25000000>;
-		};
-
-		iprocmed: iprocmed {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		iprocslow: iprocslow {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-
-		periph_clk: periph_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&a9pll>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-	};
-
-	usb2_phy: usb2-phy {
-		compatible = "brcm,ns-usb2-phy";
-		reg = <0x1800c000 0x1000>;
-		reg-names = "dmu";
-		#phy-cells = <0>;
-		clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
-		clock-names = "phy-ref-clk";
-	};
-
-	usb3_phy: usb3-phy {
-		compatible = "brcm,ns-ax-usb3-phy";
-		reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
-		reg-names = "dmp", "ccb-mii";
-		#phy-cells = <0>;
-	};
-
-	axi@18000000 {
-		compatible = "brcm,bus-axi";
-		reg = <0x18000000 0x1000>;
-		ranges = <0x00000000 0x18000000 0x00100000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0x000fffff 0xffff>;
-		interrupt-map = 
-			/* ChipCommon */
-			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Switch Register Access Block */
-			<0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* PCIe Controller 0 */
-			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* PCIe Controller 1 */
-			<0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* PCIe Controller 2 */
-			<0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* USB 2.0 Controller */
-			<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* USB 3.0 Controller */
-			<0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 0 */
-			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 1 */
-			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 2 */
-			<0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 3 */
-			<0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* NAND Controller */
-			<0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-
-		chipcommon: chipcommon@0 {
-			reg = <0x00000000 0x1000>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		pcie0: pcie@12000 {
-			reg = <0x00012000 0x1000>;
-		};
-
-		pcie1: pcie@13000 {
-			reg = <0x00013000 0x1000>;
-		};
-
-		usb2: usb2@21000 {
-			reg = <0x00021000 0x1000>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			interrupt-parent = <&gic>;
-
-			ehci: ehci@21000 {
-				#usb-cells = <0>;
-
-				compatible = "generic-ehci";
-				reg = <0x00021000 0x1000>;
-				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy>;
-			};
-
-			ohci: ohci@22000 {
-				#usb-cells = <0>;
-
-				compatible = "generic-ohci";
-				reg = <0x00022000 0x1000>;
-				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		usb3: usb3@23000 {
-			reg = <0x00023000 0x1000>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			interrupt-parent = <&gic>;
-
-			xhci: xhci@23000 {
-				#usb-cells = <0>;
-
-				compatible = "generic-xhci";
-				reg = <0x00023000 0x1000>;
-				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb3_phy>;
-				phy-names = "usb";
-			};
-		};
-
-		gmac0: ethernet@24000 {
-			reg = <0x24000 0x800>;
-		};
-
-		gmac1: ethernet@25000 {
-			reg = <0x25000 0x800>;
-		};
-
-		gmac2: ethernet@26000 {
-			reg = <0x26000 0x800>;
-		};
-
-		gmac3: ethernet@27000 {
-			reg = <0x27000 0x800>;
-		};
-	};
-
-	mdio: mdio@18003000 {
-		compatible = "brcm,iproc-mdio";
-		reg = <0x18003000 0x8>;
-		#size-cells = <1>;
-		#address-cells = <0>;
-		status = "disabled";
-	};
-
-	i2c0: i2c@18009000 {
-		compatible = "brcm,iproc-i2c";
-		reg = <0x18009000 0x50>;
-		interrupts = <GIC_SPI 121 IRQ_TYPE_NONE>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-frequency = <100000>;
-		status = "disabled";
-	};
-
-	lcpll0: lcpll0@1800c100 {
-		#clock-cells = <1>;
-		compatible = "brcm,nsp-lcpll0";
-		reg = <0x1800c100 0x14>;
-		clocks = <&osc>;
-		clock-output-names = "lcpll0", "pcie_phy", "sdio",
-				     "ddr_phy";
-	};
-
-	genpll: genpll@1800c140 {
-		#clock-cells = <1>;
-		compatible = "brcm,nsp-genpll";
-		reg = <0x1800c140 0x24>;
-		clocks = <&osc>;
-		clock-output-names = "genpll", "phy", "ethernetclk",
-				     "usbclk", "iprocfast", "sata1",
-				     "sata2";
-	};
-
-	thermal: thermal@1800c2c0 {
-		compatible = "brcm,ns-thermal";
-		reg = <0x1800c2c0 0x10>;
-		#thermal-sensor-cells = <0>;
-	};
-
-	srab: srab@18007000 {
-		compatible = "brcm,bcm5301x-srab";
-		reg = <0x18007000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		status = "disabled";
-
-		/* ports are defined in board DTS */
-	};
-
-	rng: rng@18004000 {
-		compatible = "brcm,bcm5301x-rng";
-		reg = <0x18004000 0x14>;
-	};
-
-	nand: nand@18028000 {
-		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
-		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
-		reg-names = "nand", "iproc-idm", "iproc-ext";
-		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		brcm,nand-has-wp;
-	};
-
-	spi@18029200 {
-		compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
-		reg = <0x18029200 0x184>,
-		      <0x18029000 0x124>,
-		      <0x1811b408 0x004>,
-		      <0x180293a0 0x01c>;
-		reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
-		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "spi_lr_fullness_reached",
-				  "spi_lr_session_aborted",
-				  "spi_lr_impatient",
-				  "spi_lr_session_done",
-				  "spi_lr_overhead",
-				  "mspi_done",
-				  "mspi_halted";
-		clocks = <&iprocmed>;
-		clock-names = "iprocmed";
-		num-cs = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		spi_nor: spi-nor@0 {
-			compatible = "jedec,spi-nor";
-			reg = <0>;
-			spi-max-frequency = <20000000>;
-			linux,part-probe = "ofpart", "bcm47xxpart";
-			status = "disabled";
-		};
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <1000>;
-			coefficients = <(-556) 418000>;
-			thermal-sensors = <&thermal>;
-
-			trips {
-				cpu-crit {
-					temperature	= <125000>;
-					hysteresis	= <0>;
-					type		= "critical";
-				};
-			};
-
-			cooling-maps {
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi
deleted file mode 100644
index eae623f76401..000000000000
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-		};
-	};
-
-	mpcore {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x18310000 0x00008000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		gic: interrupt-controller@1000 {
-			compatible = "arm,cortex-a7-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x1000 0x1000>,
-			      <0x2000 0x0100>;
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		alp: oscillator {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <40000000>;
-		};
-	};
-
-	axi@18000000 {
-		compatible = "brcm,bus-axi";
-		reg = <0x18000000 0x1000>;
-		ranges = <0x00000000 0x18000000 0x00100000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0x000fffff 0xffff>;
-		interrupt-map =
-			/* ChipCommon */
-			<0x00000000 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* IEEE 802.11 0 */
-			<0x00001000 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* PCIe Controller 0 */
-			<0x00002000 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00002000 1 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00002000 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00002000 3 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00002000 4 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00002000 5 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* USB 2.0 Controller */
-			<0x00004000 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 0 */
-			<0x00005000 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* IEEE 802.11 1 */
-			<0x0000a000 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 1 */
-			<0x0000b000 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-
-		chipcommon: chipcommon@0 {
-			compatible = "simple-bus";
-			reg = <0x00000000 0x1000>;
-			ranges;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			uart0: serial@0300 {
-				compatible = "ns16550a";
-				reg = <0x0300 0x100>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_PPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&alp>;
-				status = "okay";
-			};
-		};
-
-		pcie0: pcie@2000 {
-			reg = <0x00002000 0x1000>;
-		};
-
-		usb2: usb2@4000 {
-			reg = <0x4000 0x1000>;
-			ranges;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ehci: ehci@4000 {
-				compatible = "generic-ehci";
-				reg = <0x4000 0x1000>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ehci_port1: port@1 {
-					reg = <1>;
-				};
-
-				ehci_port2: port@2 {
-					reg = <2>;
-				};
-			};
-
-			ohci: ohci@d000 {
-				#usb-cells = <0>;
-
-				compatible = "generic-ohci";
-				reg = <0xd000 0x1000>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ohci_port1: port@1 {
-					reg = <1>;
-				};
-
-				ohci_port2: port@2 {
-					reg = <2>;
-				};
-			};
-		};
-
-		gmac0: ethernet@5000 {
-			reg = <0x5000 0x1000>;
-		};
-
-		gmac1: ethernet@b000 {
-			reg = <0xb000 0x1000>;
-		};
-
-		pmu@12000 {
-			compatible = "simple-mfd", "syscon";
-			reg = <0x00012000 0x00001000>;
-
-			ilp: ilp {
-				compatible = "brcm,bcm53573-ilp";
-				clocks = <&alp>;
-				#clock-cells = <0>;
-				clock-output-names = "ilp";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm59056.dtsi b/arch/arm/boot/dts/bcm59056.dtsi
deleted file mode 100644
index 066adfb10bd5..000000000000
--- a/arch/arm/boot/dts/bcm59056.dtsi
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
-* Copyright 2014 Linaro Limited
-* Author: Matt Porter <mporter@linaro.org>
-*
-* This program is free software; you can redistribute it and/or modify it
-* under  the terms of the GNU General  Public License as published by the
-* Free Software Foundation;  either version 2 of the License, or (at your
-* option) any later version.
-*/
-
-&pmu {
-	compatible = "brcm,bcm59056";
-	regulators {
-		rfldo_reg: rfldo {
-		};
-
-		camldo1_reg: camldo1 {
-		};
-
-		camldo2_reg: camldo2 {
-		};
-
-		simldo1_reg: simldo1 {
-		};
-
-		simldo2_reg: simldo2 {
-		};
-
-		sdldo_reg: sdldo {
-		};
-
-		sdxldo_reg: sdxldo {
-		};
-
-		mmcldo1_reg: mmcldo1 {
-		};
-
-		mmcldo2_reg: mmcldo2 {
-		};
-
-		audldo_reg: audldo {
-		};
-
-		micldo_reg: micldo {
-		};
-
-		usbldo_reg: usbldo {
-		};
-
-		vibldo_reg: vibldo {
-		};
-
-		csr_reg: csr {
-		};
-
-		iosr1_reg: iosr1 {
-		};
-
-		iosr2_reg: iosr2 {
-		};
-
-		msr_reg: msr {
-		};
-
-		sdsr1_reg: sdsr1 {
-		};
-
-		sdsr2_reg: sdsr2 {
-		};
-
-		vsr_reg: vsr {
-		};
-
-		gpldo1_reg: gpldo1 {
-		};
-
-		gpldo2_reg: gpldo2 {
-		};
-
-		gpldo3_reg: gpldo3 {
-		};
-
-		gpldo4_reg: gpldo4 {
-		};
-
-		gpldo5_reg: gpldo5 {
-		};
-
-		gpldo6_reg: gpldo6 {
-		};
-
-		vbus_reg: vbus {
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
deleted file mode 100644
index d0560e8cd6de..000000000000
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * Broadcom BCM63138 DSL SoCs Device Tree
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "brcm,bcm63138";
-	model = "Broadcom BCM63138 DSL SoC";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		uart0 = &serial0;
-		uart1 = &serial1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0>;
-			enable-method = "brcm,bcm63138";
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <1>;
-			enable-method = "brcm,bcm63138";
-			resets = <&pmb0 4 1>;
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* UBUS peripheral clock */
-		periph_clk: periph_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-			clock-output-names = "periph";
-		};
-
-		/* peripheral clock for system timer */
-		axi_clk: axi_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&armpll>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		/* APB bus clock */
-		apb_clk: apb_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&armpll>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-	};
-
-	/* ARM bus */
-	axi@80000000 {
-		compatible = "simple-bus";
-		ranges = <0 0x80000000 0x784000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		L2: cache-controller@1d000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x1d000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-			cache-size = <524288>;
-			cache-sets = <1024>;
-			cache-line-size = <32>;
-			interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		scu: scu@1e000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0x1e000 0x100>;
-		};
-
-		gic: interrupt-controller@1e100 {
-			compatible = "arm,cortex-a9-gic";
-			reg = <0x1f000 0x1000
-				0x1e100 0x100>;
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-		};
-
-		global_timer: timer@1e200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x1e200 0x20>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&axi_clk>;
-		};
-
-		local_timer: local-timer@1e600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x1e600 0x20>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&axi_clk>;
-		};
-
-		twd_watchdog: watchdog@1e620 {
-			compatible = "arm,cortex-a9-twd-wdt";
-			reg = <0x1e620 0x20>;
-			interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		armpll: armpll {
-			#clock-cells = <0>;
-			compatible = "brcm,bcm63138-armpll";
-			clocks = <&periph_clk>;
-			reg = <0x20000 0xf00>;
-		};
-
-		pmb0: reset-controller@4800c0 {
-			compatible = "brcm,bcm63138-pmb";
-			reg = <0x4800c0 0x10>;
-			#reset-cells = <2>;
-		};
-
-		pmb1: reset-controller@4800e0 {
-			compatible = "brcm,bcm63138-pmb";
-			reg = <0x4800e0 0x10>;
-			#reset-cells = <2>;
-		};
-	};
-
-	/* Legacy UBUS base */
-	ubus@fffe8000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xfffe8000 0x8100>;
-
-		timer: timer@80 {
-			compatible = "brcm,bcm6328-timer", "syscon";
-			reg = <0x80 0x3c>;
-		};
-
-		serial0: serial@600 {
-			compatible = "brcm,bcm6345-uart";
-			reg = <0x600 0x1b>;
-			interrupts = <GIC_SPI 32 0>;
-			clocks = <&periph_clk>;
-			clock-names = "periph";
-			status = "disabled";
-		};
-
-		serial1: serial@620 {
-			compatible = "brcm,bcm6345-uart";
-			reg = <0x620 0x1b>;
-			interrupts = <GIC_SPI 33 0>;
-			clocks = <&periph_clk>;
-			clock-names = "periph";
-			status = "disabled";
-		};
-
-		nand: nand@2000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
-			reg = <0x2000 0x600>, <0xf0 0x10>;
-			reg-names = "nand", "nand-int-base";
-			status = "disabled";
-			interrupts = <GIC_SPI 38 0>;
-			interrupt-names = "nand";
-		};
-
-		bootlut: bootlut@8000 {
-			compatible = "brcm,bcm63138-bootlut";
-			reg = <0x8000 0x50>;
-		};
-
-		reboot {
-			compatible = "syscon-reboot";
-			regmap = <&timer>;
-			offset = <0x34>;
-			mask = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts
deleted file mode 100644
index 370aa2cfddf2..000000000000
--- a/arch/arm/boot/dts/bcm963138dvt.dts
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Broadcom BCM63138 Reference Board DTS
- */
-
-/dts-v1/;
-
-#include "bcm63138.dtsi"
-
-/ {
-	compatible = "brcm,BCM963138DVT", "brcm,bcm63138";
-	model = "Broadcom BCM963138DVT";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &serial0;
-	};
-
-	memory {
-		reg = <0x0 0x08000000>;
-	};
-
-};
-
-&serial0 {
-	status = "okay";
-};
-
-&serial1 {
-	status = "okay";
-};
-
-&nand {
-	status = "okay";
-
-	nandcs@0 {
-		compatible = "brcm,nandcs";
-		reg = <0>;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-		brcm,nand-oob-sectors-size = <16>;
-	};
-};
diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
deleted file mode 100644
index 1c475796d17f..000000000000
--- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Device Tree file for Sony NSZ-GS7
- *
- * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2. This program is licensed "as is" without any
- *     warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "berlin2.dtsi"
-
-/ {
-	model = "Sony NSZ-GS7";
-	compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin";
-
-	chosen {
-		bootargs = "earlyprintk";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1 GB */
-	};
-};
-
-&ahci { status = "okay"; };
-
-&eth1 { status = "okay"; };
-
-/* Unpopulated SATA plug on solder side */
-&sata0 { status = "okay"; };
-
-&sata_phy { status = "okay"; };
-
-/* Samsung M8G2FA 8GB eMMC */
-&sdhci2 {
-	non-removable;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&uart0 { status = "okay"; };
diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
deleted file mode 100644
index ca24def0ce13..000000000000
--- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Device Tree file for Google Chromecast
- *
- * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2. This program is licensed "as is" without any
- *     warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "berlin2cd.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Google Chromecast";
-	compatible = "google,chromecast", "marvell,berlin2cd", "marvell,berlin";
-
-	chosen {
-		bootargs = "earlyprintk";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		white {
-			label = "white";
-			gpios = <&portc 1 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-
-		red {
-			label = "red";
-			gpios = <&portc 2 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-	};
-};
-
-/*
- * AzureWave AW-NH387 (Marvell 88W8787)
- * 802.11b/g/n + Bluetooth 2.1
- */
-&sdhci0 {
-	non-removable;
-	status = "okay";
-};
-
-&uart0 { status = "okay"; };
-
-&usb_phy1 { status = "okay"; };
-
-&usb1 { status = "okay"; };
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
deleted file mode 100644
index 57aa5f8a7c77..000000000000
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2. This program is licensed "as is" without any
- *     warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "berlin2q.dtsi"
-
-/ {
-	model = "Marvell BG2-Q DMP";
-	compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "earlyprintk";
-		stdout-path = "serial0:115200n8";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator_usb0 {
-			compatible = "regulator-fixed";
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&portb 8 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb1_vbus: regulator_usb1 {
-			compatible = "regulator-fixed";
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&portb 10 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb2_vbus: regulator_usb2 {
-			compatible = "regulator-fixed";
-			regulator-name = "usb2_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&portb 12 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_sdio1_vmmc: regulator_sdio1_vmmc {
-			compatible = "regulator-fixed";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-name = "sdio1_vmmc";
-			enable-active-high;
-			regulator-boot-on;
-			gpio = <&portb 21 GPIO_ACTIVE_HIGH>;
-		};
-
-		reg_sdio1_vqmmc: regulator_sido1_vqmmc {
-			compatible = "regulator-gpio";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-name = "sdio1_vqmmc";
-			regulator-type = "voltage";
-			enable-active-high;
-			gpios = <&portb 16 GPIO_ACTIVE_HIGH>;
-			states = <3300000 0x1
-				  1800000 0x0>;
-		};
-	};
-};
-
-&soc_pinctrl {
-	sd1gpio_pmux: sd1pwr-pmux {
-		groups = "G23", "G32";
-		function = "gpio";
-	};
-};
-
-&sdhci1 {
-	vmmc-supply = <&reg_sdio1_vmmc>;
-	vqmmc-supply = <&reg_sdio1_vqmmc>;
-	cd-gpios = <&portc 30 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&portd 0 GPIO_ACTIVE_HIGH>;
-	pinctrl-0 = <&sd1gpio_pmux>, <&sd1_pmux>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&sdhci2 {
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&usb_phy0 {
-	status = "okay";
-};
-
-&usb_phy2 {
-	status = "okay";
-};
-
-&usb0 {
-	vbus-supply = <&reg_usb0_vbus>;
-	status = "okay";
-};
-
-&usb2 {
-	vbus-supply = <&reg_usb2_vbus>;
-	status = "okay";
-};
-
-&eth0 {
-	status = "okay";
-};
-
-&sata0 {
-	status = "okay";
-};
-
-&sata_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/broadcom/Makefile b/arch/arm/boot/dts/broadcom/Makefile
new file mode 100644
index 000000000000..2552e11b5e31
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/Makefile
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0
+# Enables support for device-tree overlays
+DTC_FLAGS_bcm2835-rpi-b := -@
+DTC_FLAGS_bcm2835-rpi-a := -@
+DTC_FLAGS_bcm2835-rpi-b-rev2 := -@
+DTC_FLAGS_bcm2835-rpi-b-plus := -@
+DTC_FLAGS_bcm2835-rpi-a-plus := -@
+DTC_FLAGS_bcm2835-rpi-cm1-io1 := -@
+DTC_FLAGS_bcm2836-rpi-2-b := -@
+DTC_FLAGS_bcm2837-rpi-2-b := -@
+DTC_FLAGS_bcm2837-rpi-3-a-plus := -@
+DTC_FLAGS_bcm2837-rpi-3-b := -@
+DTC_FLAGS_bcm2837-rpi-3-b-plus := -@
+DTC_FLAGS_bcm2837-rpi-cm3-io3 := -@
+DTC_FLAGS_bcm2837-rpi-zero-2-w := -@
+DTC_FLAGS_bcm2711-rpi-400 := -@
+DTC_FLAGS_bcm2711-rpi-4-b := -@
+DTC_FLAGS_bcm2711-rpi-cm4-io := -@
+DTC_FLAGS_bcm2835-rpi-zero := -@
+DTC_FLAGS_bcm2835-rpi-zero-w := -@
+dtb-$(CONFIG_ARCH_BCM2835) += \
+	bcm2835-rpi-b.dtb \
+	bcm2835-rpi-a.dtb \
+	bcm2835-rpi-b-rev2.dtb \
+	bcm2835-rpi-b-plus.dtb \
+	bcm2835-rpi-a-plus.dtb \
+	bcm2835-rpi-cm1-io1.dtb \
+	bcm2836-rpi-2-b.dtb \
+	bcm2837-rpi-2-b.dtb \
+	bcm2837-rpi-3-a-plus.dtb \
+	bcm2837-rpi-3-b.dtb \
+	bcm2837-rpi-3-b-plus.dtb \
+	bcm2837-rpi-cm3-io3.dtb \
+	bcm2837-rpi-zero-2-w.dtb \
+	bcm2711-rpi-400.dtb \
+	bcm2711-rpi-4-b.dtb \
+	bcm2711-rpi-cm4-io.dtb \
+	bcm2835-rpi-zero.dtb \
+	bcm2835-rpi-zero-w.dtb
+dtb-$(CONFIG_ARCH_BCMBCA) += \
+	bcm6846-genexis-xg6846b.dtb \
+	bcm947622.dtb \
+	bcm963138.dtb \
+	bcm963138dvt.dtb \
+	bcm963148.dtb \
+	bcm963178.dtb \
+	bcm96756.dtb \
+	bcm96846.dtb \
+	bcm96855.dtb \
+	bcm96878.dtb
+dtb-$(CONFIG_ARCH_BCM_5301X) += \
+	bcm4708-asus-rt-ac56u.dtb \
+	bcm4708-asus-rt-ac68u.dtb \
+	bcm4708-buffalo-wxr-1750dhp.dtb \
+	bcm4708-buffalo-wzr-1750dhp.dtb \
+	bcm4708-buffalo-wzr-1166dhp.dtb \
+	bcm4708-buffalo-wzr-1166dhp2.dtb \
+	bcm4708-linksys-ea6300-v1.dtb \
+	bcm4708-linksys-ea6500-v2.dtb \
+	bcm4708-luxul-xap-1510.dtb \
+	bcm4708-luxul-xwc-1000.dtb \
+	bcm4708-netgear-r6250.dtb \
+	bcm4708-netgear-r6300-v2.dtb \
+	bcm4708-smartrg-sr400ac.dtb \
+	bcm47081-asus-rt-n18u.dtb \
+	bcm47081-buffalo-wzr-600dhp2.dtb \
+	bcm47081-buffalo-wzr-900dhp.dtb \
+	bcm47081-luxul-xap-1410.dtb \
+	bcm47081-luxul-xwr-1200.dtb \
+	bcm47081-tplink-archer-c5-v2.dtb \
+	bcm4709-asus-rt-ac3200.dtb \
+	bcm4709-asus-rt-ac87u.dtb \
+	bcm4709-buffalo-wxr-1900dhp.dtb \
+	bcm4709-linksys-ea9200.dtb \
+	bcm4709-netgear-r7000.dtb \
+	bcm4709-netgear-r8000.dtb \
+	bcm4709-tplink-archer-c9-v1.dtb \
+	bcm47094-asus-rt-ac3100.dtb \
+	bcm47094-asus-rt-ac5300.dtb \
+	bcm47094-asus-rt-ac88u.dtb \
+	bcm47094-dlink-dir-885l.dtb \
+	bcm47094-dlink-dir-890l.dtb \
+	bcm47094-linksys-panamera.dtb \
+	bcm47094-luxul-abr-4500.dtb \
+	bcm47094-luxul-xap-1610.dtb \
+	bcm47094-luxul-xbr-4500.dtb \
+	bcm47094-luxul-xwc-2000.dtb \
+	bcm47094-luxul-xwr-3100.dtb \
+	bcm47094-luxul-xwr-3150-v1.dtb \
+	bcm47094-netgear-r8500.dtb \
+	bcm47094-phicomm-k3.dtb \
+	bcm53015-meraki-mr26.dtb \
+	bcm53016-dlink-dwl-8610ap.dtb \
+	bcm53016-meraki-mr32.dtb \
+	bcm94708.dtb \
+	bcm94709.dtb \
+	bcm953012er.dtb \
+	bcm953012hr.dtb \
+	bcm953012k.dtb
+dtb-$(CONFIG_ARCH_BCM_53573) += \
+	bcm47189-luxul-xap-1440.dtb \
+	bcm47189-luxul-xap-810.dtb \
+	bcm47189-tenda-ac9.dtb \
+	bcm947189acdbmr.dtb
+dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
+	bcm911360_entphn.dtb \
+	bcm911360k.dtb \
+	bcm958300k.dtb \
+	bcm958305k.dtb
+dtb-$(CONFIG_ARCH_BCM_HR2) += \
+	bcm53340-ubnt-unifi-switch8.dtb
+dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
+	bcm28155-ap.dtb \
+	bcm21664-garnet.dtb \
+	bcm23550-sparrow.dtb
+dtb-$(CONFIG_ARCH_BCM_NSP) += \
+	bcm958522er.dtb \
+	bcm958525er.dtb \
+	bcm958525xmc.dtb \
+	bcm958622hr.dtb \
+	bcm958623hr.dtb \
+	bcm958625-meraki-mx64.dtb \
+	bcm958625-meraki-mx64-a0.dtb \
+	bcm958625-meraki-mx64w.dtb \
+	bcm958625-meraki-mx64w-a0.dtb \
+	bcm958625-meraki-mx65.dtb \
+	bcm958625-meraki-mx65w.dtb \
+	bcm958625hr.dtb \
+	bcm988312hr.dtb \
+	bcm958625k.dtb
+dtb-$(CONFIG_ARCH_BRCMSTB) += \
+	bcm7445-bcm97445svmb.dtb
diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/broadcom/bcm-cygnus-clock.dtsi
index 80b6ba4ca50c..52f91a12a99a 100644
--- a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-cygnus-clock.dtsi
@@ -42,7 +42,7 @@ clocks {
 	};
 
 	/* Cygnus ARM PLL */
-	armpll: armpll {
+	armpll: armpll@19000000 {
 		#clock-cells = <0>;
 		compatible = "brcm,cygnus-armpll";
 		clocks = <&osc>;
@@ -67,7 +67,7 @@ clocks {
 		clock-mult = <1>;
 	};
 
-	genpll: genpll {
+	genpll: genpll@301d000 {
 		#clock-cells = <1>;
 		compatible = "brcm,cygnus-genpll";
 		reg = <0x0301d000 0x2c>, <0x0301c020 0x4>;
@@ -94,7 +94,7 @@ clocks {
 		clock-mult = <1>;
 	};
 
-	lcpll0: lcpll0 {
+	lcpll0: lcpll0@301d02c {
 		#clock-cells = <1>;
 		compatible = "brcm,cygnus-lcpll0";
 		reg = <0x0301d02c 0x1c>, <0x0301c020 0x4>;
@@ -103,7 +103,7 @@ clocks {
 				     "usb_phy", "smart_card", "ch5";
 	};
 
-	mipipll: mipipll {
+	mipipll: mipipll@180a9800 {
 		#clock-cells = <1>;
 		compatible = "brcm,cygnus-mipipll";
 		reg = <0x180a9800 0x2c>, <0x0301c020 0x4>, <0x180aa024 0x4>;
@@ -113,7 +113,7 @@ clocks {
 				     "ch5_unused";
 	};
 
-	asiu_clks: asiu_clks {
+	asiu_clks: asiu_clks@301d048 {
 		#clock-cells = <1>;
 		compatible = "brcm,cygnus-asiu-clk";
 		reg = <0x0301d048 0xc>, <0x180aa024 0x4>;
@@ -122,7 +122,7 @@ clocks {
 		clock-output-names = "keypad", "adc/touch", "pwm";
 	};
 
-	audiopll: audiopll {
+	audiopll: audiopll@180aeb00 {
 		#clock-cells = <1>;
 		compatible = "brcm,cygnus-audiopll";
 		reg = <0x180aeb00 0x68>;
diff --git a/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
new file mode 100644
index 000000000000..07ca0d993c9f
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
@@ -0,0 +1,626 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/bcm-cygnus.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,cygnus";
+	model = "Broadcom Cygnus SoC";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		ethernet0 = &eth0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+	};
+
+	/include/ "bcm-cygnus-clock.dtsi"
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	core@19000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19000000 0x1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		timer@20200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&periph_clk>;
+		};
+
+		gic: interrupt-controller@21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
+		};
+
+		L2: cache-controller@22000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x22000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	axi {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		otp: otp@301c800 {
+			compatible = "brcm,ocotp";
+			reg = <0x0301c800 0x2c>;
+			brcm,ocotp-size = <2048>;
+			status = "disabled";
+		};
+
+		pcie_phy: pcie_phy@301d0a0 {
+			compatible = "brcm,cygnus-pcie-phy";
+			reg = <0x0301d0a0 0x14>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcie0_phy: pcie-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			pcie1_phy: pcie-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		pinctrl: pinctrl@301d0c8 {
+			compatible = "brcm,cygnus-pinmux";
+			reg = <0x0301d0c8 0x30>,
+			      <0x0301d24c 0x2c>;
+
+			spi_0: spi_0 {
+				function = "spi0";
+				groups = "spi0_grp";
+			};
+
+			spi_1: spi_1 {
+				function = "spi1";
+				groups = "spi1_grp";
+			};
+
+			spi_2: spi_2 {
+				function = "spi2";
+				groups = "spi2_grp";
+			};
+		};
+
+		mailbox: mailbox@3024024 {
+			compatible = "brcm,iproc-mailbox";
+			reg = <0x03024024 0x40>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			#mbox-cells = <1>;
+		};
+
+		gpio_crmu: gpio@3024800 {
+			compatible = "brcm,cygnus-crmu-gpio";
+			reg = <0x03024800 0x50>,
+			      <0x03024008 0x18>;
+			ngpios = <6>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&mailbox>;
+			interrupts = <0>;
+		};
+
+		mdio: mdio@18002000 {
+			compatible = "brcm,iproc-mdio";
+			reg = <0x18002000 0x8>;
+			#size-cells = <0>;
+			#address-cells = <1>;
+			status = "disabled";
+
+			gphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			gphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		switch: switch@18007000 {
+			compatible = "brcm,bcm11360-srab", "brcm,cygnus-srab";
+			reg = <0x18007000 0x1000>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					phy-handle = <&gphy0>;
+					phy-mode = "rgmii";
+				};
+
+				port@1 {
+					reg = <1>;
+					phy-handle = <&gphy1>;
+					phy-mode = "rgmii";
+				};
+
+				port@8 {
+					reg = <8>;
+					label = "cpu";
+					ethernet = <&eth0>;
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+
+		i2c0: i2c@18008000 {
+			compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+			reg = <0x18008000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		wdt0: wdt@18009000 {
+			compatible = "arm,sp805" , "arm,primecell";
+			reg = <0x18009000 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		gpio_ccm: gpio@1800a000 {
+			compatible = "brcm,cygnus-ccm-gpio";
+			reg = <0x1800a000 0x50>,
+			      <0x0301d164 0x20>;
+			ngpios = <24>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		i2c1: i2c@1800b000 {
+			compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+			reg = <0x1800b000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		pcie0: pcie@18012000 {
+			compatible = "brcm,iproc-pcie";
+			reg = <0x18012000 0x1000>;
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+
+			linux,pci-domain = <0>;
+
+			bus-range = <0x00 0xff>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0	  0x28000000 0 0x00010000>,
+				 <0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+
+			phys = <&pcie0_phy>;
+			phy-names = "pcie-phy";
+
+			status = "disabled";
+
+			msi-parent = <&msi0>;
+			msi0: msi {
+				compatible = "brcm,iproc-msi";
+				msi-controller;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pcie1: pcie@18013000 {
+			compatible = "brcm,iproc-pcie";
+			reg = <0x18013000 0x1000>;
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+
+			linux,pci-domain = <1>;
+
+			bus-range = <0x00 0xff>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0	  0x48000000 0 0x00010000>,
+				 <0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+
+			phys = <&pcie1_phy>;
+			phy-names = "pcie-phy";
+
+			status = "disabled";
+
+			msi-parent = <&msi1>;
+			msi1: msi {
+				compatible = "brcm,iproc-msi";
+				msi-controller;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		dma0: dma@18018000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x18018000 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		uart0: serial@18020000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18020000 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		uart1: serial@18021000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18021000 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		uart2: serial@18022000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18022000 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		uart3: serial@18023000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18023000 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		spi0: spi@18028000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x18028000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&spi_0>;
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "sspclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		spi1: spi@18029000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x18029000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&spi_1>;
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "sspclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		spi2: spi@1802a000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1802a000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&spi_2>;
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "sspclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		rng: rng@18032000 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0x18032000 0x28>;
+		};
+
+		sdhci0: sdhci@18041000 {
+			compatible = "brcm,sdhci-iproc-cygnus";
+			reg = <0x18041000 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>;
+			bus-width = <4>;
+			sdhci,auto-cmd12;
+			status = "disabled";
+		};
+
+		eth0: ethernet@18042000 {
+			compatible = "brcm,amac";
+			reg = <0x18042000 0x1000>,
+			      <0x18110000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@18043000 {
+			compatible = "brcm,sdhci-iproc-cygnus";
+			reg = <0x18043000 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>;
+			bus-width = <4>;
+			sdhci,auto-cmd12;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@18046000 {
+			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+			reg = <0x18046000 0x600>, <0xf8105408 0x600>,
+			      <0x18046f00 0x20>;
+			reg-names = "nand", "iproc-idm", "iproc-ext";
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			brcm,nand-has-wp;
+		};
+
+		ehci0: usb@18048000 {
+			compatible = "generic-ehci";
+			reg = <0x18048000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		ohci0: usb@18048800 {
+			compatible = "generic-ohci";
+			reg = <0x18048800 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		clcd: clcd@180a0000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x180a0000 0x1000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "combined";
+			clocks = <&axi41_clk>, <&apb_clk>;
+			clock-names = "clcdclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		v3d: v3d@180a2000 {
+			compatible = "brcm,cygnus-v3d";
+			reg = <0x180a2000 0x1000>;
+			clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
+			clock-names = "v3d_clk";
+			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		vc4: gpu {
+			compatible = "brcm,cygnus-vc4";
+		};
+
+		gpio_asiu: gpio@180a5000 {
+			compatible = "brcm,cygnus-asiu-gpio";
+			reg = <0x180a5000 0x668>;
+			ngpios = <146>;
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 42 1>,
+					<&pinctrl 1 44 3>,
+					<&pinctrl 4 48 1>,
+					<&pinctrl 5 50 3>,
+					<&pinctrl 8 126 1>,
+					<&pinctrl 9 155 1>,
+					<&pinctrl 10 152 1>,
+					<&pinctrl 11 154 1>,
+					<&pinctrl 12 153 1>,
+					<&pinctrl 13 127 3>,
+					<&pinctrl 16 140 1>,
+					<&pinctrl 17 145 7>,
+					<&pinctrl 24 130 10>,
+					<&pinctrl 34 141 4>,
+					<&pinctrl 38 54 1>,
+					<&pinctrl 39 56 3>,
+					<&pinctrl 42 60 3>,
+					<&pinctrl 45 64 3>,
+					<&pinctrl 48 68 2>,
+					<&pinctrl 50 84 6>,
+					<&pinctrl 56 94 6>,
+					<&pinctrl 62 72 1>,
+					<&pinctrl 63 70 1>,
+					<&pinctrl 64 80 1>,
+					<&pinctrl 65 74 3>,
+					<&pinctrl 68 78 1>,
+					<&pinctrl 69 82 1>,
+					<&pinctrl 70 156 17>,
+					<&pinctrl 87 104 12>,
+					<&pinctrl 99 102 2>,
+					<&pinctrl 101 90 4>,
+					<&pinctrl 105 116 6>,
+					<&pinctrl 111 100 2>,
+					<&pinctrl 113 122 4>,
+					<&pinctrl 123 11 1>,
+					<&pinctrl 124 38 4>,
+					<&pinctrl 128 43 1>,
+					<&pinctrl 129 47 1>,
+					<&pinctrl 130 49 1>,
+					<&pinctrl 131 53 1>,
+					<&pinctrl 132 55 1>,
+					<&pinctrl 133 59 1>,
+					<&pinctrl 134 63 1>,
+					<&pinctrl 135 67 1>,
+					<&pinctrl 136 71 1>,
+					<&pinctrl 137 73 1>,
+					<&pinctrl 138 77 1>,
+					<&pinctrl 139 79 1>,
+					<&pinctrl 140 81 1>,
+					<&pinctrl 141 83 1>,
+					<&pinctrl 142 10 1>;
+		};
+
+		ts_adc_syscon: ts_adc_syscon@180a6000 {
+			compatible = "brcm,iproc-ts-adc-syscon", "syscon";
+			reg = <0x180a6000 0xc30>;
+		};
+
+		touchscreen: touchscreen@180a6000 {
+			compatible = "brcm,iproc-touchscreen";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ts_syscon = <&ts_adc_syscon>;
+			clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
+			clock-names = "tsc_clk";
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		adc: adc@180a6000 {
+			compatible = "brcm,iproc-static-adc";
+			#io-channel-cells = <1>;
+			adc-syscon = <&ts_adc_syscon>;
+			clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
+			clock-names = "tsc_clk";
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pwm: pwm@180aa500 {
+			compatible = "brcm,kona-pwm";
+			reg = <0x180aa500 0xc4>;
+			#pwm-cells = <3>;
+			clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>;
+			status = "disabled";
+		};
+
+		keypad: keypad@180ac000 {
+			compatible = "brcm,bcm-keypad";
+			reg = <0x180ac000 0x14c>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&asiu_clks BCM_CYGNUS_ASIU_KEYPAD_CLK>;
+			clock-names = "peri_clk";
+			clock-frequency = <31250>;
+			pull-up-enabled;
+			col-debounce-filter-period = <0>;
+			status-debounce-filter-period = <0>;
+			row-output-enabled;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
new file mode 100644
index 000000000000..75545b10ef2f
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
@@ -0,0 +1,369 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,hr2";
+	model = "Broadcom Hurricane 2 SoC";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+	};
+
+	mpcore@19000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19000000 0x00023000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		a9pll: arm_clk@0 {
+			#clock-cells = <0>;
+			compatible = "brcm,hr2-armpll";
+			clocks = <&osc>;
+			reg = <0x0 0x1000>;
+		};
+
+		timer@20200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&periph_clk>;
+		};
+
+		twd-timer@20600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x20600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+
+		twd-watchdog@20620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x20620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+
+		gic: interrupt-controller@21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
+		};
+
+		L2: cache-controller@22000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x22000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+		};
+
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&a9pll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+	};
+
+	axi@18000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18000000 0x0011c40c>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uart0: serial@300 {
+			compatible = "ns16550a";
+			reg = <0x0300 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			status = "disabled";
+		};
+
+		uart1: serial@400 {
+			compatible = "ns16550a";
+			reg = <0x0400 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			status = "disabled";
+		};
+
+		dma@20000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x20000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		amac0: ethernet@22000 {
+			compatible = "brcm,nsp-amac";
+			reg = <0x22000 0x1000>,
+			      <0x110000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@26000 {
+			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+			reg = <0x26000 0x600>,
+			      <0x11b408 0x600>,
+			      <0x026f00 0x20>;
+			reg-names = "nand", "iproc-idm", "iproc-ext";
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			brcm,nand-has-wp;
+		};
+
+		gpiob: gpio@30000 {
+			compatible = "brcm,iproc-hr2-gpio", "brcm,iproc-gpio";
+			reg = <0x30000 0x50>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			ngpios = <4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pwm: pwm@31000 {
+			compatible = "brcm,iproc-pwm";
+			reg = <0x31000 0x28>;
+			clocks = <&osc>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		rng: rng@33000 {
+			compatible = "brcm,bcm-nsp-rng";
+			reg = <0x33000 0x14>;
+		};
+
+		qspi: spi@27200 {
+			compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
+			reg = <0x027200 0x184>,
+			      <0x027000 0x124>,
+			      <0x11c408 0x004>,
+			      <0x0273a0 0x01c>;
+			reg-names = "mspi", "bspi", "intr_regs",
+				    "intr_status_reg";
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overhead",
+					  "mspi_done",
+					  "mspi_halted";
+			num-cs = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* partitions defined in board DTS */
+		};
+
+		ccbtimer0: timer@34000 {
+			compatible = "arm,sp804";
+			reg = <0x34000 0x1000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ccbtimer1: timer@35000 {
+			compatible = "arm,sp804";
+			reg = <0x35000 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		i2c0: i2c@38000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x38000 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+		};
+
+		watchdog: watchdog@39000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x39000 0x1000>;
+			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		i2c1: i2c@3b000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x3b000 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+		};
+	};
+
+	pflash: nor@20000000 {
+		compatible = "cfi-flash", "jedec-flash";
+		reg = <0x20000000 0x04000000>;
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* partitions defined in board DTS */
+	};
+
+	pcie0: pcie@18012000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18012000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+
+		linux,pci-domain = <0>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
+
+		status = "disabled";
+
+		msi-parent = <&msi0>;
+		msi0: msi {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+			brcm,pcie-msi-inten;
+		};
+	};
+
+	pcie1: pcie@18013000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18013000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+
+		linux,pci-domain = <1>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
+
+		status = "disabled";
+
+		msi-parent = <&msi1>;
+		msi1: msi {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			brcm,pcie-msi-inten;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm-ns.dtsi b/arch/arm/boot/dts/broadcom/bcm-ns.dtsi
new file mode 100644
index 000000000000..d0d5f7e52a91
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm-ns.dtsi
@@ -0,0 +1,516 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
+ */
+
+#include <dt-bindings/clock/bcm-nsp.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts =
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	chipcommon-a-bus@18000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18000000 0x00001000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uart0: serial@300 {
+			compatible = "ns16550";
+			reg = <0x0300 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			status = "disabled";
+		};
+
+		uart1: serial@400 {
+			compatible = "ns16550";
+			reg = <0x0400 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinmux_uart1>;
+			status = "disabled";
+		};
+	};
+
+	mpcore-bus@19000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19000000 0x00023000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		scu@20000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x20000 0x100>;
+		};
+
+		timer@20200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&periph_clk>;
+		};
+
+		timer@20600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x20600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+
+		gic: interrupt-controller@21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
+		};
+
+		L2: cache-controller@22000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x22000 0x1000>;
+			cache-unified;
+			arm,shared-override;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
+			cache-level = <2>;
+		};
+	};
+
+	axi@18000000 {
+		compatible = "brcm,bus-axi";
+		reg = <0x18000000 0x1000>;
+		ranges = <0x00000000 0x18000000 0x00100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0x000fffff 0xffff>;
+		interrupt-map =
+			/* ChipCommon */
+			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Switch Register Access Block */
+			<0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 0 */
+			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 1 */
+			<0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 2 */
+			<0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* USB 2.0 Controller */
+			<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* USB 3.0 Controller */
+			<0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 0 */
+			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 1 */
+			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 2 */
+			<0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 3 */
+			<0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* NAND Controller */
+			<0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+
+		chipcommon: chipcommon@0 {
+			reg = <0x00000000 0x1000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcie0: pcie@12000 {
+			reg = <0x00012000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+		};
+
+		pcie1: pcie@13000 {
+			reg = <0x00013000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+		};
+
+		pcie2: pcie@14000 {
+			reg = <0x00014000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+		};
+
+		usb2: usb2@21000 {
+			reg = <0x00021000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			interrupt-parent = <&gic>;
+
+			ehci: usb@21000 {
+				compatible = "generic-ehci";
+				reg = <0x00021000 0x1000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ehci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+
+				ehci_port2: port@2 {
+					reg = <2>;
+					#trigger-source-cells = <0>;
+				};
+			};
+
+			ohci: usb@22000 {
+				compatible = "generic-ohci";
+				reg = <0x00022000 0x1000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ohci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+
+				ohci_port2: port@2 {
+					reg = <2>;
+					#trigger-source-cells = <0>;
+				};
+			};
+		};
+
+		usb3: usb3@23000 {
+			reg = <0x00023000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			interrupt-parent = <&gic>;
+
+			xhci: usb@23000 {
+				compatible = "generic-xhci";
+				reg = <0x00023000 0x1000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb3_phy>;
+				phy-names = "usb";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				xhci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+			};
+		};
+
+		gmac0: ethernet@24000 {
+			reg = <0x24000 0x800>;
+			phy-mode = "internal";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		gmac1: ethernet@25000 {
+			reg = <0x25000 0x800>;
+			phy-mode = "internal";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		gmac2: ethernet@26000 {
+			reg = <0x26000 0x800>;
+			phy-mode = "internal";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		gmac3: ethernet@27000 {
+			reg = <0x27000 0x800>;
+		};
+	};
+
+	pwm: pwm@18002000 {
+		compatible = "brcm,iproc-pwm";
+		reg = <0x18002000 0x28>;
+		clocks = <&osc>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	mdio: mdio@18003000 {
+		compatible = "brcm,iproc-mdio";
+		reg = <0x18003000 0x8>;
+		#size-cells = <0>;
+		#address-cells = <1>;
+	};
+
+	mdio-mux@18003000 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		mdio-parent-bus = <&mdio>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x18003000 0x4>;
+		mux-mask = <0x200>;
+
+		mdio@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb3_phy: usb3-phy@10 {
+				compatible = "brcm,ns-ax-usb3-phy";
+				reg = <0x10>;
+				usb3-dmp-syscon = <&usb3_dmp>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+
+	rng: rng@18004000 {
+		compatible = "brcm,bcm5301x-rng";
+		reg = <0x18004000 0x14>;
+	};
+
+	srab: ethernet-switch@18007000 {
+		compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab";
+		reg = <0x18007000 0x1000>;
+
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+
+			port@2 {
+				reg = <2>;
+			};
+
+			port@3 {
+				reg = <3>;
+			};
+
+			port@4 {
+				reg = <4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				ethernet = <&gmac0>;
+			};
+
+			port@7 {
+				reg = <7>;
+				ethernet = <&gmac1>;
+			};
+
+			port@8 {
+				reg = <8>;
+				ethernet = <&gmac2>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+
+	uart2: serial@18008000 {
+		compatible = "ns16550a";
+		reg = <0x18008000 0x20>;
+		clocks = <&iprocslow>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	dmu-bus@1800c000 {
+		compatible = "simple-bus";
+		ranges = <0 0x1800c000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cru-bus@100 {
+			compatible = "brcm,ns-cru", "simple-mfd";
+			reg = <0x100 0x1a4>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			usb2_phy: phy@164 {
+				compatible = "brcm,ns-usb2-phy";
+				reg = <0x164 0x4>;
+				brcm,syscon-clkset = <&cru_clkset>;
+				clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+				clock-names = "phy-ref-clk";
+				#phy-cells = <0>;
+			};
+
+			cru_clkset: syscon@180 {
+				compatible = "brcm,cru-clkset", "syscon";
+				reg = <0x180 0x4>;
+			};
+
+			pinctrl: pinctrl@1c0 {
+				compatible = "brcm,bcm4708-pinmux";
+				reg = <0x1c0 0x24>;
+				reg-names = "cru_gpio_control";
+
+				spi-pins {
+					groups = "spi_grp";
+					function = "spi";
+				};
+
+				pinmux_i2c: i2c-pins {
+					groups = "i2c_grp";
+					function = "i2c";
+				};
+
+				pinmux_pwm: pwm-pins {
+					groups = "pwm0_grp", "pwm1_grp",
+						 "pwm2_grp", "pwm3_grp";
+					function = "pwm";
+				};
+
+				pinmux_uart1: uart1-pins {
+					groups = "uart1_grp";
+					function = "uart1";
+				};
+			};
+
+			thermal: thermal@2c0 {
+				compatible = "brcm,ns-thermal";
+				reg = <0x2c0 0x10>;
+				#thermal-sensor-cells = <0>;
+			};
+		};
+	};
+
+	nand_controller: nand-controller@18028000 {
+		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
+		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
+		reg-names = "nand", "iproc-idm", "iproc-ext";
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		brcm,nand-has-wp;
+	};
+
+	usb3_dmp: syscon@18105000 {
+		reg = <0x18105000 0x1000>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			coefficients = <(-556) 418000>;
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm-nsp-ax.dtsi b/arch/arm/boot/dts/broadcom/bcm-nsp-ax.dtsi
new file mode 100644
index 000000000000..f2e941dbab10
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm-nsp-ax.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom Northstar Plus Ax stepping-specific bindings.
+ * Notable differences from B0+ are the secondary-boot-reg and
+ * lack of DMA coherency.
+ */
+
+&cpu1 {
+	secondary-boot-reg = <0xffff042c>;
+};
+
+&dma {
+	/delete-property/ dma-coherent;
+};
+
+&sdio {
+	/delete-property/ dma-coherent;
+};
+
+&amac0 {
+	/delete-property/ dma-coherent;
+};
+
+&amac1 {
+	/delete-property/ dma-coherent;
+};
+
+&amac2 {
+	/delete-property/ dma-coherent;
+};
+
+&ehci0 {
+	/delete-property/ dma-coherent;
+};
+
+&mailbox {
+	/delete-property/ dma-coherent;
+};
+
+&xhci {
+	/delete-property/ dma-coherent;
+};
+
+&ehci0 {
+	/delete-property/ dma-coherent;
+};
+
+&ohci0 {
+	/delete-property/ dma-coherent;
+};
+
+&i2c0 {
+	/delete-property/ dma-coherent;
+};
+
+&sata {
+	/delete-property/ dma-coherent;
+};
+
+&pcie0 {
+	/delete-property/ dma-coherent;
+};
+
+&pcie1 {
+	/delete-property/ dma-coherent;
+};
+
+&pcie2 {
+	/delete-property/ dma-coherent;
+};
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
index 7204d1def23d..6a4482c93167 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
@@ -34,13 +34,21 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/bcm-nsp.h>
 
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "brcm,nsp";
 	model = "Broadcom Northstar Plus SoC";
 	interrupt-parent = <&gic>;
 
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		ethernet0 = &amac0;
+		ethernet1 = &amac1;
+		ethernet2 = &amac2;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -64,18 +72,18 @@
 
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
-	mpcore {
+	mpcore-bus@19000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x19000000 0x00023000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		a9pll: arm_clk@00000 {
+		a9pll: arm_clk@0 {
 			#clock-cells = <0>;
 			compatible = "brcm,nsp-armpll";
 			clocks = <&osc>;
@@ -85,7 +93,7 @@
 		timer@20200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&periph_clk>;
 		};
 
@@ -93,7 +101,7 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x20600 0x20>;
 			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
+						  IRQ_TYPE_EDGE_RISING)>;
 			clocks = <&periph_clk>;
 		};
 
@@ -114,7 +122,7 @@
 			      <0x20100 0x100>;
 		};
 
-		L2: l2-cache {
+		L2: cache-controller@22000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x22000 0x1000>;
 			cache-unified;
@@ -158,13 +166,13 @@
 		};
 	};
 
-	axi {
+	axi: axi@18000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x18000000 0x0011c40c>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		gpioa: gpio@0020 {
+		gpioa: gpio@20 {
 			compatible = "brcm,nsp-gpio-a";
 			reg = <0x0020 0x70>,
 			      <0x3f1c4 0x1c>;
@@ -172,11 +180,12 @@
 			gpio-controller;
 			ngpios = <32>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinctrl 0 0 32>;
 		};
 
-		uart0: serial@0300 {
+		uart0: serial@300 {
 			compatible = "ns16550a";
 			reg = <0x0300 0x100>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -184,7 +193,7 @@
 			status = "disabled";
 		};
 
-		uart1: serial@0400 {
+		uart1: serial@400 {
 			compatible = "ns16550a";
 			reg = <0x0400 0x100>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -192,7 +201,7 @@
 			status = "disabled";
 		};
 
-		dma@20000 {
+		dma: dma@20000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x20000 0x1000>;
 			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
@@ -207,14 +216,17 @@
 			clocks = <&iprocslow>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
+			dma-coherent;
+			status = "disabled";
 		};
 
-		sdio: sdhci@21000 {
+		sdio: mmc@21000 {
 			compatible = "brcm,sdhci-iproc-cygnus";
 			reg = <0x21000 0x100>;
 			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 			sdhci,auto-cmd12;
 			clocks = <&lcpll0 BCM_NSP_LCPLL0_SDIO_CLK>;
+			dma-coherent;
 			status = "disabled";
 		};
 
@@ -224,6 +236,7 @@
 			      <0x110000 0x1000>;
 			reg-names = "amac_base", "idm_base";
 			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 			status = "disabled";
 		};
 
@@ -233,6 +246,7 @@
 			      <0x111000 0x1000>;
 			reg-names = "amac_base", "idm_base";
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 			status = "disabled";
 		};
 
@@ -242,19 +256,21 @@
 			      <0x112000 0x1000>;
 			reg-names = "amac_base", "idm_base";
 			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 			status = "disabled";
 		};
 
-		mailbox: mailbox@25000 {
+		mailbox: mailbox@25c00 {
 			compatible = "brcm,iproc-fa2-mbox";
-			reg = <0x25000 0x445>;
-			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x25c00 0x400>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 			#mbox-cells = <1>;
 			brcm,rx-status-len = <32>;
 			brcm,use-bcm-hdr;
+			dma-coherent;
 		};
 
-		nand: nand@26000 {
+		nand_controller: nand-controller@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x026000 0x600>,
 			      <0x11b408 0x600>,
@@ -268,8 +284,8 @@
 			brcm,nand-has-wp;
 		};
 
-		qspi: qspi@27200 {
-			compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
+		qspi: spi@27200 {
+			compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
 			reg = <0x027200 0x184>,
 			      <0x027000 0x124>,
 			      <0x11c408 0x004>,
@@ -295,6 +311,33 @@
 			num-cs = <2>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		xhci: usb@29000 {
+			compatible = "generic-xhci";
+			reg = <0x29000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb3_phy>;
+			phy-names = "usb3-phy";
+			dma-coherent;
+			status = "disabled";
+		};
+
+		ehci0: usb@2a000 {
+			compatible = "generic-ehci";
+			reg = <0x2a000 0x100>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		ohci0: usb@2b000 {
+			compatible = "generic-ohci";
+			reg = <0x2b000 0x100>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			status = "disabled";
 		};
 
 		crypto@2f000 {
@@ -310,6 +353,7 @@
 			gpio-controller;
 			ngpios = <4>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -321,18 +365,40 @@
 			status = "disabled";
 		};
 
-		ehci0: usb@2a000 {
-			compatible = "generic-ehci";
-			reg = <0x2a000 0x100>;
-			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
+		mdio: mdio@32000 {
+			compatible = "brcm,iproc-mdio";
+			reg = <0x32000 0x8>;
+			#size-cells = <0>;
+			#address-cells = <1>;
 		};
 
-		ohci0: usb@2b000 {
-			compatible = "generic-ohci";
-			reg = <0x2b000 0x100>;
-			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
+		mdio-mux@32000 {
+			compatible = "mdio-mux-mmioreg", "mdio-mux";
+			reg = <0x32000 0x4>;
+			mux-mask = <0x200>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mdio-parent-bus = <&mdio>;
+
+			mdio_int: mdio@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb3_phy: usb3-phy@10 {
+					compatible = "brcm,ns-bx-usb3-phy";
+					reg = <0x10>;
+					usb3-dmp-syscon = <&usb3_dmp>;
+					#phy-cells = <0>;
+					status = "disabled";
+				};
+			};
+
+			mdio_ext: mdio@200 {
+				reg = <0x200>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		rng: rng@33000 {
@@ -341,7 +407,7 @@
 		};
 
 		ccbtimer0: timer@34000 {
-			compatible = "arm,sp804";
+			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x34000 0x1000>;
 			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
@@ -350,7 +416,7 @@
 		};
 
 		ccbtimer1: timer@35000 {
-			compatible = "arm,sp804";
+			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x35000 0x1000>;
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
@@ -358,15 +424,45 @@
 			clock-names = "apb_pclk";
 		};
 
-		srab: srab@36000 {
+		srab: ethernet-switch@36000 {
 			compatible = "brcm,nsp-srab";
-			reg = <0x36000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
+			reg = <0x36000 0x1000>,
+			      <0x3f308 0x8>,
+			      <0x3f410 0xc>;
+			reg-names = "srab", "mux_config", "sgmii_config";
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "link_state_p0",
+					  "link_state_p1",
+					  "link_state_p2",
+					  "link_state_p3",
+					  "link_state_p4",
+					  "link_state_p5",
+					  "link_state_p7",
+					  "link_state_p8",
+					  "phy",
+					  "ts",
+					  "imp_sleep_timer_p5",
+					  "imp_sleep_timer_p7",
+					  "imp_sleep_timer_p8";
 			status = "disabled";
 
 			/* ports are defined in board DTS */
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		i2c0: i2c@38000 {
@@ -374,8 +470,9 @@
 			reg = <0x38000 0x50>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <100000>;
+			dma-coherent;
 			status = "disabled";
 		};
 
@@ -384,7 +481,7 @@
 			reg = <0x39000 0x1000>;
 			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&iprocslow>, <&iprocslow>;
-			clock-names = "wdogclk", "apb_pclk";
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		lcpll0: lcpll0@3f100 {
@@ -439,13 +536,14 @@
 			};
 		};
 
-		sata: ahci@41000 {
+		sata: sata@41000 {
 			compatible = "brcm,bcm-nsp-ahci";
 			reg-names = "ahci", "top-ctrl";
 			reg = <0x41000 0x1000>, <0x40020 0x1c>;
 			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			dma-coherent;
 			status = "disabled";
 
 			sata0: sata-port@0 {
@@ -460,6 +558,10 @@
 				phy-names = "sata-phy";
 			};
 		};
+
+		usb3_dmp: syscon@104000 {
+			reg = <0x104000 0x1000>;
+		};
 	};
 
 	pcie0: pcie@18012000 {
@@ -468,7 +570,7 @@
 
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 
 		linux,pci-domain = <0>;
 
@@ -483,17 +585,18 @@
 		 */
 		ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
 
+		dma-coherent;
 		status = "disabled";
 
 		msi-parent = <&msi0>;
-		msi0: msi-controller {
+		msi0: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>,
-				     <GIC_SPI 128 IRQ_TYPE_NONE>,
-				     <GIC_SPI 129 IRQ_TYPE_NONE>,
-				     <GIC_SPI 130 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
 			brcm,pcie-msi-inten;
 		};
 	};
@@ -504,7 +607,7 @@
 
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 
 		linux,pci-domain = <1>;
 
@@ -519,17 +622,18 @@
 		 */
 		ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
 
+		dma-coherent;
 		status = "disabled";
 
 		msi-parent = <&msi1>;
-		msi1: msi-controller {
+		msi1: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 133 IRQ_TYPE_NONE>,
-				     <GIC_SPI 134 IRQ_TYPE_NONE>,
-				     <GIC_SPI 135 IRQ_TYPE_NONE>,
-				     <GIC_SPI 136 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 			brcm,pcie-msi-inten;
 		};
 	};
@@ -540,7 +644,7 @@
 
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 
 		linux,pci-domain = <2>;
 
@@ -555,17 +659,18 @@
 		 */
 		ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>;
 
+		dma-coherent;
 		status = "disabled";
 
 		msi-parent = <&msi2>;
-		msi2: msi-controller {
+		msi2: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>,
-				     <GIC_SPI 140 IRQ_TYPE_NONE>,
-				     <GIC_SPI 141 IRQ_TYPE_NONE>,
-				     <GIC_SPI 142 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
 			brcm,pcie-msi-inten;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/broadcom/bcm11351.dtsi
index 18045c38bcf1..53857e572080 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm11351.dtsi
@@ -1,24 +1,13 @@
-/*
- * Copyright (C) 2012-2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2012-2013 Broadcom Corporation
 
+#include <dt-bindings/clock/bcm281xx.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
-#include "dt-bindings/clock/bcm281xx.h"
-
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "BCM11351 SoC";
 	compatible = "brcm,bcm11351";
 	interrupt-parent = <&gic>;
@@ -55,52 +44,52 @@
 		      <0x3ff00100 0x100>;
 	};
 
-	smc@0x3404c000 {
+	smc@3404c000 {
 		compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
 		reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
 	};
 
-	uart@3e000000 {
+	uartb: serial@3e000000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e000000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB>;
 		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
-	uart@3e001000 {
+	uartb2: serial@3e001000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e001000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB2>;
 		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
-	uart@3e002000 {
+	uartb3: serial@3e002000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e002000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
-	uart@3e003000 {
+	uartb4: serial@3e003000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e003000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB4>;
 		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
-	L2: l2-cache {
+	L2: l2-cache@3ff20000 {
 		compatible = "brcm,bcm11351-a2-pl310-cache";
 		reg = <0x3ff20000 0x1000>;
 		cache-unified;
@@ -122,20 +111,19 @@
 	gpio: gpio@35003000 {
 		compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio";
 		reg = <0x35003000 0x800>;
-		interrupts =
-		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		#interrupt-cells = <2>;
 		gpio-controller;
 		interrupt-controller;
 	};
 
-	sdio1: sdio@3f180000 {
+	sdio1: mmc@3f180000 {
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f180000 0x10000>;
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -143,7 +131,7 @@
 		status = "disabled";
 	};
 
-	sdio2: sdio@3f190000 {
+	sdio2: mmc@3f190000 {
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f190000 0x10000>;
 		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
@@ -151,7 +139,7 @@
 		status = "disabled";
 	};
 
-	sdio3: sdio@3f1a0000 {
+	sdio3: mmc@3f1a0000 {
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f1a0000 0x10000>;
 		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
@@ -159,7 +147,7 @@
 		status = "disabled";
 	};
 
-	sdio4: sdio@3f1b0000 {
+	sdio4: mmc@3f1b0000 {
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f1b0000 0x10000>;
 		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
@@ -172,7 +160,7 @@
 		reg = <0x35004800 0x430>;
 	};
 
-	i2c@3e016000 {
+	bsc1: i2c@3e016000 {
 		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
 		reg = <0x3e016000 0x80>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
@@ -182,7 +170,7 @@
 		status = "disabled";
 	};
 
-	i2c@3e017000 {
+	bsc2: i2c@3e017000 {
 		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
 		reg = <0x3e017000 0x80>;
 		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
@@ -192,7 +180,7 @@
 		status = "disabled";
 	};
 
-	i2c@3e018000 {
+	bsc3: i2c@3e018000 {
 		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
 		reg = <0x3e018000 0x80>;
 		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
@@ -202,7 +190,7 @@
 		status = "disabled";
 	};
 
-	i2c@3500d000 {
+	pmu_bsc: i2c@3500d000 {
 		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
 		reg = <0x3500d000 0x80>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -225,21 +213,21 @@
 		#size-cells = <1>;
 		ranges;
 
-		root_ccu: root_ccu {
+		root_ccu: root_ccu@35001000 {
 			compatible = "brcm,bcm11351-root-ccu";
 			reg = <0x35001000 0x0f00>;
 			#clock-cells = <1>;
 			clock-output-names = "frac_1m";
 		};
 
-		hub_ccu: hub_ccu {
+		hub_ccu: hub_ccu@34000000 {
 			compatible = "brcm,bcm11351-hub-ccu";
 			reg = <0x34000000 0x0f00>;
 			#clock-cells = <1>;
 			clock-output-names = "tmon_1m";
 		};
 
-		aon_ccu: aon_ccu {
+		aon_ccu: aon_ccu@35002000 {
 			compatible = "brcm,bcm11351-aon-ccu";
 			reg = <0x35002000 0x0f00>;
 			#clock-cells = <1>;
@@ -248,7 +236,7 @@
 					     "pmu_bsc_var";
 		};
 
-		master_ccu: master_ccu {
+		master_ccu: master_ccu@3f001000 {
 			compatible = "brcm,bcm11351-master-ccu";
 			reg = <0x3f001000 0x0f00>;
 			#clock-cells = <1>;
@@ -261,7 +249,7 @@
 					     "hsic2_12m";
 		};
 
-		slave_ccu: slave_ccu {
+		slave_ccu: slave_ccu@3e011000 {
 			compatible = "brcm,bcm11351-slave-ccu";
 			reg = <0x3e011000 0x0f00>;
 			#clock-cells = <1>;
diff --git a/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts b/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts
new file mode 100644
index 000000000000..4f8ddc1b3ab7
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Broadcom Corporation
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm21664.dtsi"
+
+/ {
+	model = "BCM21664 Garnet board";
+	compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+};
+
+&sdio1 {
+	max-frequency = <48000000>;
+	status = "okay";
+};
+
+&sdio2 {
+	non-removable;
+	max-frequency = <48000000>;
+	status = "okay";
+};
+
+&sdio4 {
+	max-frequency = <48000000>;
+	cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uartb {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm21664.dtsi b/arch/arm/boot/dts/broadcom/bcm21664.dtsi
new file mode 100644
index 000000000000..f0d0300079b6
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm21664.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Broadcom Corporation
+
+#include "bcm2166x-common.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			enable-method = "brcm,bcm11351-cpu-method";
+			secondary-boot-reg = <0x35004178>;
+			reg = <1>;
+		};
+	};
+};
+
+&apps {
+		gic: interrupt-controller@1c01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x01c01000 0x1000>,
+				  <0x01c00100 0x100>;
+		};
+
+		L2: cache-controller@1c20000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x01c20000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+};
+
+&bsc1 {
+	compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+};
+
+&bsc2 {
+	compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+};
+
+&bsc3 {
+	compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+};
+
+&bsc4 {
+	compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+};
+
+&gpio {
+	compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio";
+};
+
+&smc {
+	compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi b/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi
new file mode 100644
index 000000000000..f535212cb52f
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Common device tree for components shared between the BCM21664 and BCM23550
+ * SoCs.
+ *
+ * Copyright (C) 2016 Broadcom
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/bcm21664.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/* Hub bus */
+	hub: hub-bus@34000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x34000000 0x102f83ac>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		smc: smc@4e000 {
+			/* Compatible filled by SoC DTSI */
+			reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */
+		};
+
+		resetmgr: reset-controller@1001f00 {
+			compatible = "brcm,bcm21664-resetmgr";
+			reg = <0x01001f00 0x24>;
+		};
+
+		gpio: gpio@1003000 {
+			/* Compatible filled by SoC DTSI */
+			reg = <0x01003000 0x524>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+		};
+
+		pinctrl: pinctrl@1004800 {
+			compatible = "brcm,bcm21664-pinctrl";
+			reg = <0x01004800 0x7f4>;
+		};
+
+		timer@1006000 {
+			compatible = "brcm,kona-timer";
+			reg = <0x01006000 0x1c>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
+		};
+	};
+
+	/* Slaves bus */
+	slaves: slaves-bus@3e000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x3e000000 0x0001c070>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uartb: serial@0 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x00000000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uartb2: serial@1000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x00001000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uartb3: serial@2000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x00002000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		bsc1: i2c@16000 {
+			/* Compatible filled by SoC DTSI */
+			reg = <0x00016000 0x70>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
+			status = "disabled";
+		};
+
+		bsc2: i2c@17000 {
+			/* Compatible filled by SoC DTSI */
+			reg = <0x00017000 0x70>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
+			status = "disabled";
+		};
+
+		bsc3: i2c@18000 {
+			/* Compatible filled by SoC DTSI */
+			reg = <0x00018000 0x70>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
+			status = "disabled";
+		};
+
+		bsc4: i2c@1c000 {
+			/* Compatible filled by SoC DTSI */
+			reg = <0x0001c000 0x70>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
+			status = "disabled";
+		};
+	};
+
+	/* Apps bus */
+	apps: apps-bus@3e300000 {
+		compatible = "simple-bus";
+		ranges = <0 0x3e300000 0x01c02000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		usbotg: usb@e20000 {
+			compatible = "snps,dwc2";
+			reg = <0x00e20000 0x10000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_otg_ahb_clk>;
+			clock-names = "otg";
+			phys = <&usbphy>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		usbphy: usb-phy@e30000 {
+			compatible = "brcm,kona-usb2-phy";
+			reg = <0x00e30000 0x28>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		sdio1: mmc@e80000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00e80000 0x801c>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
+			status = "disabled";
+		};
+
+		sdio2: mmc@e90000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00e90000 0x801c>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
+			status = "disabled";
+		};
+
+		sdio3: mmc@ea0000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00ea0000 0x801c>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
+			status = "disabled";
+		};
+
+		sdio4: mmc@eb0000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00eb0000 0x801c>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * Fixed clocks are defined before CCUs whose
+		 * clocks may depend on them.
+		 */
+
+		ref_32k_clk: ref_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		bbl_32k_clk: bbl_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		ref_13m_clk: ref_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		var_13m_clk: var_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		dft_19_5m_clk: dft_19_5m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19500000>;
+		};
+
+		ref_crystal_clk: ref_crystal {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+		};
+
+		ref_52m_clk: ref_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		var_52m_clk: var_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		usb_otg_ahb_clk: usb_otg_ahb {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		ref_96m_clk: ref_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		var_96m_clk: var_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		ref_104m_clk: ref_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		var_104m_clk: var_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		ref_156m_clk: ref_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		var_156m_clk: var_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		root_ccu: root_ccu@35001000 {
+			compatible = "brcm,bcm21664-root-ccu";
+			reg = <0x35001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "frac_1m";
+		};
+
+		aon_ccu: aon_ccu@35002000 {
+			compatible = "brcm,bcm21664-aon-ccu";
+			reg = <0x35002000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "hub_timer";
+		};
+
+		slave_ccu: slave_ccu@3e011000 {
+			compatible = "brcm,bcm21664-slave-ccu";
+			reg = <0x3e011000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "uartb",
+					     "uartb2",
+					     "uartb3",
+					     "bsc1",
+					     "bsc2",
+					     "bsc3",
+					     "bsc4";
+		};
+
+		master_ccu: master_ccu@3f001000 {
+			compatible = "brcm,bcm21664-master-ccu";
+			reg = <0x3f001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "sdio1",
+					     "sdio2",
+					     "sdio3",
+					     "sdio4",
+					     "sdio1_sleep",
+					     "sdio2_sleep",
+					     "sdio3_sleep",
+					     "sdio4_sleep";
+		};
+	};
+};
+
+#include "bcm2166x-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/broadcom/bcm2166x-pinctrl.dtsi b/arch/arm/boot/dts/broadcom/bcm2166x-pinctrl.dtsi
new file mode 100644
index 000000000000..51b8730c8fee
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2166x-pinctrl.dtsi
@@ -0,0 +1,297 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Common pinmux configrations for BCM2166x (BCM21664/BCM23550).
+ *
+ * Copyright (C) 2025 Artur Weber <aweber.kernel@gmail.com>
+ */
+
+&pinctrl {
+	/* BSC1 */
+	bsc1_pins: bsc1-pins {
+		bsc1clk-grp0 {
+			pins = "bsc1clk";
+			function = "alt1"; /* BSC1CLK */
+		};
+
+		bsc1dat-grp0 {
+			pins = "bsc1dat";
+			function = "alt1"; /* BSC1DAT */
+		};
+	};
+
+	/* BSC2 */
+	bsc2_pins: bsc2-pins {
+		bsc2clk-grp0 {
+			pins = "gpio16";
+			function = "alt2"; /* BSC2CLK */
+		};
+
+		bsc2dat-grp0 {
+			pins = "gpio17";
+			function = "alt2"; /* BSC2DAT */
+		};
+	};
+
+	/* BSC3 */
+	bsc3_pins: bsc3-pins {
+		bsc3clk-grp0 {
+			pins = "lcdscl";
+			function = "alt1"; /* BSC3_CLK */
+		};
+
+		bsc3dat-grp0 {
+			pins = "lcdsda";
+			function = "alt1"; /* BSC3_SDA */
+		};
+	};
+
+	/* BSC4 */
+	bsc4_pins: bsc4-pins {
+		bsc4clk-grp0 {
+			pins = "lcdres";
+			function = "alt1"; /* BSC4_CLK */
+		};
+
+		bsc4dat-grp0 {
+			pins = "lcdte";
+			function = "alt1"; /* BSC4_SDA */
+		};
+	};
+
+	/* PMBSC */
+	pmbsc_pins: pmbsc-pins {
+		pmbscclk-grp0 {
+			pins = "pmbscclk";
+			function = "alt1"; /* PMBSCCLK */
+		};
+
+		pmbscdat-grp0 {
+			pins = "pmbscdat";
+			function = "alt1"; /* PMBSCDAT */
+		};
+	};
+
+	/* SD */
+	sd_width1_pins: sd-width1-pins {
+		sdck-grp0 {
+			pins = "sdck";
+			function = "alt1"; /* SDCK */
+			bias-disable;
+		};
+
+		sdcmd-grp0 {
+			pins = "sdcmd";
+			function = "alt1"; /* SDCMD */
+			bias-pull-up;
+		};
+
+		sddat-grp0 {
+			pins = "sddat0";
+			function = "alt1"; /* SDDATx */
+			bias-pull-up;
+		};
+	};
+
+	sd_width4_pins: sd-width4-pins {
+		sdck-grp0 {
+			pins = "sdck";
+			function = "alt1"; /* SDCK */
+			bias-disable;
+		};
+
+		sdcmd-grp0 {
+			pins = "sdcmd";
+			function = "alt1"; /* SDCMD */
+			bias-pull-up;
+		};
+
+		sddat-grp0 {
+			pins = "sddat0", "sddat1", "sddat2", "sddat3";
+			function = "alt1"; /* SDDATx */
+			bias-pull-up;
+		};
+	};
+
+	/* SD1 */
+	sd1_width1_pins: sd1-width1-pins {
+		sd1ck-grp0 {
+			pins = "mmc1dat7";
+			function = "alt6"; /* SD1CK */
+			bias-disable;
+		};
+
+		sd1cmd-grp0 {
+			pins = "spi0txd";
+			function = "alt2"; /* SD1CMD */
+			bias-pull-up;
+		};
+
+		sd1dat0-grp0 {
+			pins = "mmc1dat5";
+			function = "alt6"; /* SD1DAT0 */
+			bias-pull-up;
+		};
+	};
+
+	sd1_width4_pins: sd1-width4-pins {
+		sd1ck-grp0 {
+			pins = "mmc1dat7";
+			function = "alt6"; /* SD1CK */
+			bias-disable;
+		};
+
+		sd1cmd-grp0 {
+			pins = "spi0txd";
+			function = "alt2"; /* SD1CMD */
+			bias-pull-up;
+		};
+
+		sd1dat0-grp0 {
+			pins = "mmc1dat5";
+			function = "alt6"; /* SD1DAT0 */
+			bias-pull-up;
+		};
+
+		sd1dat1-grp0 {
+			pins = "gpio93";
+			function = "alt1"; /* SD1DAT1 */
+			bias-pull-up;
+		};
+
+		sd1dat2-grp0 {
+			pins = "gpio94";
+			function = "alt1"; /* SD1DAT2 */
+			bias-pull-up;
+		};
+
+		sd1dat3-grp0 {
+			pins = "mmc1dat3";
+			function = "alt6"; /* SD1DAT3 */
+			bias-pull-up;
+		};
+	};
+
+	/* MMC0 */
+	mmc0_width1_pins: mmc0-width1-pins {
+		mmc0ck-grp0 {
+			pins = "mmc0ck";
+			function = "alt1"; /* MMC0CK */
+			bias-disable;
+		};
+
+		mmc0cmd-grp0 {
+			pins = "mmc0cmd";
+			function = "alt1"; /* MMC0CMD */
+			bias-pull-up;
+		};
+
+		mmc0dat-grp0 {
+			pins = "mmc0dat0";
+			function = "alt1"; /* MMC0DATx */
+			bias-pull-up;
+		};
+	};
+
+	mmc0_width4_pins: mmc0-width4-pins {
+		mmc0ck-grp0 {
+			pins = "mmc0ck";
+			function = "alt1"; /* MMC0CK */
+			bias-disable;
+		};
+
+		mmc0cmd-grp0 {
+			pins = "mmc0cmd";
+			function = "alt1"; /* MMC0CMD */
+			bias-pull-up;
+		};
+
+		mmc0dat-grp0 {
+			pins = "mmc0dat0", "mmc0dat1", "mmc0dat2", "mmc0dat3";
+			function = "alt1"; /* MMC0DATx */
+			bias-pull-up;
+		};
+	};
+
+	mmc0_width8_pins: mmc0-width8-pins {
+		mmc0ck-grp0 {
+			pins = "mmc0ck";
+			function = "alt1"; /* MMC0CK */
+			bias-disable;
+		};
+
+		mmc0cmd-grp0 {
+			pins = "mmc0cmd";
+			function = "alt1"; /* MMC0CMD */
+			bias-pull-up;
+		};
+
+		mmc0dat-grp0 {
+			pins = "mmc0dat0", "mmc0dat1", "mmc0dat2", "mmc0dat3",
+			       "mmc0dat4", "mmc0dat5", "mmc0dat6", "mmc0dat7";
+			function = "alt1"; /* MMC0DATx */
+			bias-pull-up;
+		};
+	};
+
+	/* MMC1 */
+	mmc1_width1_pins: mmc1-width1-pins {
+		mmc1ck-grp0 {
+			pins = "mmc1ck";
+			function = "alt1"; /* MMC1CK */
+			bias-disable;
+		};
+
+		mmc1cmd-grp0 {
+			pins = "mmc1cmd";
+			function = "alt1"; /* MMC1CMD */
+			bias-pull-up;
+		};
+
+		mmc1dat-grp0 {
+			pins = "mmc1dat0";
+			function = "alt1"; /* MMC1DATx */
+			bias-pull-up;
+		};
+	};
+
+	mmc1_width4_pins: mmc1-width4-pins {
+		mmc1ck-grp0 {
+			pins = "mmc1ck";
+			function = "alt1"; /* MMC1CK */
+			bias-disable;
+		};
+
+		mmc1cmd-grp0 {
+			pins = "mmc1cmd";
+			function = "alt1"; /* MMC1CMD */
+			bias-pull-up;
+		};
+
+		mmc1dat-grp0 {
+			pins = "mmc1dat0", "mmc1dat1", "mmc1dat2", "mmc1dat3";
+			function = "alt1"; /* MMC1DATx */
+			bias-pull-up;
+		};
+	};
+
+	mmc1_width8_pins: mmc1-width8-pins {
+		mmc1ck-grp0 {
+			pins = "mmc1ck";
+			function = "alt1"; /* MMC1CK */
+			bias-disable;
+		};
+
+		mmc1cmd-grp0 {
+			pins = "mmc1cmd";
+			function = "alt1"; /* MMC1CMD */
+			bias-pull-up;
+		};
+
+		mmc1dat-grp0 {
+			pins = "mmc1dat0", "mmc1dat1", "mmc1dat2", "mmc1dat3",
+			       "mmc1dat4", "mmc1dat5", "mmc1dat6", "mmc1dat7";
+			function = "alt1"; /* MMC1DATx */
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm23550-sparrow.dts b/arch/arm/boot/dts/broadcom/bcm23550-sparrow.dts
index 4d525ccb48c8..ace77709f468 100644
--- a/arch/arm/boot/dts/bcm23550-sparrow.dts
+++ b/arch/arm/boot/dts/broadcom/bcm23550-sparrow.dts
@@ -45,7 +45,8 @@
 		bootargs = "console=ttyS0,115200n8";
 	};
 
-	memory {
+	memory@80000000 {
+		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm23550.dtsi b/arch/arm/boot/dts/broadcom/bcm23550.dtsi
new file mode 100644
index 000000000000..c1c69381286b
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm23550.dtsi
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Device tree for the BCM23550 SoC.
+ *
+ * Copyright (C) 2016 Broadcom
+ */
+
+#include "bcm2166x-common.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <1>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <2>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <3>;
+			clock-frequency = <1000000000>;
+		};
+	};
+};
+
+&apps {
+		cdc: cdc@1b0e000 {
+			compatible = "brcm,bcm23550-cdc";
+			reg = <0x01b0e000 0x78>;
+		};
+
+		gic: interrupt-controller@1b21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x01b21000 0x1000>,
+			      <0x01b22000 0x1000>;
+		};
+};
+
+&bsc1 {
+	compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
+};
+
+&bsc2 {
+	compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
+};
+
+&bsc3 {
+	compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
+};
+
+&bsc4 {
+	compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
+};
+
+&gpio {
+	compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio";
+};
+
+&smc {
+	compatible = "brcm,bcm23550-smc", "brcm,kona-smc";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
new file mode 100644
index 000000000000..353bb50ce542
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2711.dtsi"
+#include "bcm2711-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-peripheral.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
+	model = "Raspberry Pi 4 Model B";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	cam1_reg: regulator-cam1 {
+		compatible = "regulator-fixed";
+		regulator-name = "cam1-reg";
+		enable-active-high;
+		gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	sd_io_1v8_reg: regulator-sd-io-1v8 {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-sd-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-settling-time-us = <5000>;
+		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		status = "okay";
+	};
+
+	sd_vcc_reg: regulator-sd-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&bt {
+	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+};
+
+&ddc0 {
+	status = "okay";
+};
+
+&ddc1 {
+	status = "okay";
+};
+
+&expgpio {
+	gpio-line-names = "BT_ON",		/*  0 */
+			  "WL_ON",
+			  "PWR_LED_OFF",
+			  "GLOBAL_RESET",
+			  "VDD_SD_IO_SEL",
+			  "CAM_GPIO",		/*  5 */
+			  "SD_PWR_ON",
+			  "";
+};
+
+&gpio {
+	/*
+	 * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",		/*  0 */
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",		/*  5 */
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",		/* 10 */
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",		/* 15 */
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",		/* 20 */
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",		/* 25 */
+			  "GPIO26",
+			  "GPIO27",
+			  "RGMII_MDIO",
+			  "RGMIO_MDC",
+			  /* Used by BT module */
+			  "CTS0",		/* 30 */
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",		/* 35 */
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  /* Shared with SPI flash */
+			  "PWM0_MISO",		/* 40 */
+			  "PWM1_MOSI",
+			  "STATUS_LED_G_CLK",
+			  "SPIFLASH_CE_N",
+			  "SDA0",
+			  "SCL0",		/* 45 */
+			  "RGMII_RXCLK",
+			  "RGMII_RXCTL",
+			  "RGMII_RXD0",
+			  "RGMII_RXD1",
+			  "RGMII_RXD2",		/* 50 */
+			  "RGMII_RXD3",
+			  "RGMII_TXCLK",
+			  "RGMII_TXCTL",
+			  "RGMII_TXD0",
+			  "RGMII_TXD1",		/* 55 */
+			  "RGMII_TXD2",
+			  "RGMII_TXD3";
+};
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi1 {
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led_pwr: led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pixelvalve0 {
+	status = "okay";
+};
+
+&pixelvalve1 {
+	status = "okay";
+};
+
+&pixelvalve2 {
+	status = "okay";
+};
+
+&pixelvalve4 {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
+	status = "okay";
+};
+
+/* EMMC2 is used to drive the SD card */
+&emmc2 {
+	vqmmc-supply = <&sd_io_1v8_reg>;
+	vmmc-supply = <&sd_vcc_reg>;
+	broken-cd;
+	status = "okay";
+};
+
+&genet {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-rxid";
+	status = "okay";
+};
+
+&genet_mdio {
+	phy1: ethernet-phy@1 {
+		/* No PHY interrupt */
+		reg = <0x1>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* LED1 */
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			/* LED2 */
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_AMBER>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
+	};
+};
+
+&pcie0 {
+	pci@0,0 {
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		reg = <0 0 0 0 0>;
+
+		usb@0,0 {
+			reg = <0 0 0 0 0>;
+			resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
+		};
+	};
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
+	uart-has-rtscts;
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&vc4 {
+	status = "okay";
+};
+
+&vec {
+	status = "disabled";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
new file mode 100644
index 000000000000..ca9be91b4f36
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2711-rpi-4-b.dts"
+
+/ {
+	compatible = "raspberrypi,400", "brcm,bcm2711";
+	model = "Raspberry Pi 400";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&expgpio 5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&expgpio {
+	gpio-line-names = "BT_ON",
+			  "WL_ON",
+			  "PWR_LED_OFF",
+			  "GLOBAL_RESET",
+			  "VDD_SD_IO_SEL",
+			  "GLOBAL_SHUTDOWN",
+			  "SD_PWR_ON",
+			  "SHUTDOWN_REQUEST";
+};
+
+&genet_mdio {
+	clock-frequency = <1950000>;
+	/delete-node/ leds;
+};
+
+&led_pwr {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+/delete-node/ &led_act;
+
+&pm {
+	/delete-property/ system-power-controller;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts
new file mode 100644
index 000000000000..6bc77dd48c0d
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include <dt-bindings/leds/common.h>
+#include "bcm2711-rpi-cm4.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	model = "Raspberry Pi Compute Module 4 IO Board";
+};
+
+&ddc0 {
+	status = "okay";
+};
+
+&ddc1 {
+	status = "okay";
+};
+
+&gpio {
+	/*
+	 * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "RGMII_MDIO",
+			  "RGMIO_MDC",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  /* Shared with SPI flash */
+			  "PWM0_MISO",
+			  "PWM1_MOSI",
+			  "STATUS_LED_G_CLK",
+			  "SPIFLASH_CE_N",
+			  "SDA0",
+			  "SCL0",
+			  "RGMII_RXCLK",
+			  "RGMII_RXCTL",
+			  "RGMII_RXD0",
+			  "RGMII_RXD1",
+			  "RGMII_RXD2",
+			  "RGMII_RXD3",
+			  "RGMII_TXCLK",
+			  "RGMII_TXCTL",
+			  "RGMII_TXD0",
+			  "RGMII_TXD1",
+			  "RGMII_TXD2",
+			  "RGMII_TXD3";
+};
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi1 {
+	status = "okay";
+};
+
+&genet {
+	status = "okay";
+};
+
+&i2c0_1 {
+	rtc@51 {
+		/* Attention: An alarm resets the machine */
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+	};
+};
+
+&phy1 {
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* LED2 */
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+
+		/* LED3 */
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+	};
+};
+
+&led_act {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pixelvalve0 {
+	status = "okay";
+};
+
+&pixelvalve1 {
+	status = "okay";
+};
+
+&pixelvalve2 {
+	status = "okay";
+};
+
+&pixelvalve4 {
+	status = "okay";
+};
+
+&vc4 {
+	status = "okay";
+};
+
+&vec {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4.dtsi b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4.dtsi
new file mode 100644
index 000000000000..48e63ab7848c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4.dtsi
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2711.dtsi"
+#include "bcm2711-rpi.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,4-compute-module", "brcm,bcm2711";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	sd_io_1v8_reg: regulator-sd-io-1v8 {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-sd-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-settling-time-us = <5000>;
+		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		status = "okay";
+	};
+
+	sd_vcc_reg: regulator-sd-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&bt {
+	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+};
+
+/* EMMC2 is used to drive the eMMC */
+&emmc2 {
+	bus-width = <8>;
+	vqmmc-supply = <&sd_io_1v8_reg>;
+	vmmc-supply = <&sd_vcc_reg>;
+	broken-cd;
+	/* Even the IP block is limited to 100 MHz
+	 * this provides a throughput gain
+	 */
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&expgpio {
+	gpio-line-names = "BT_ON",
+			  "WL_ON",
+			  "PWR_LED_OFF",
+			  "ANT1",
+			  "VDD_SD_IO_SEL",
+			  "CAM_GPIO",
+			  "SD_PWR_ON",
+			  "ANT2";
+
+	ant1: ant1-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_HIGH>;
+		/* internal antenna enabled */
+		output-high;
+		line-name = "ant1";
+	};
+
+	ant2: ant2-hog {
+		gpio-hog;
+		gpios = <7 GPIO_ACTIVE_HIGH>;
+		/* external antenna disabled */
+		output-low;
+		line-name = "ant2";
+	};
+};
+
+&genet {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-rxid";
+	status = "okay";
+};
+
+&genet_mdio {
+	phy1: ethernet-phy@0 {
+		/* No PHY interrupt */
+		reg = <0x0>;
+	};
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
+	uart-has-rtscts;
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
new file mode 100644
index 000000000000..1eb6406449d1
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm2835-rpi.dtsi"
+
+#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
+
+/ {
+	/* Will be filled by the bootloader */
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0 0>;
+	};
+
+	aliases {
+		emmc2bus = &emmc2bus;
+		ethernet0 = &genet;
+		pcie0 = &pcie0;
+		blconfig = &blconfig;
+	};
+
+	i2c0mux: i2c-mux0 {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&i2c0>;
+
+		pinctrl-names = "i2c0", "i2c0-vc";
+		pinctrl-0 = <&i2c0_gpio0>;
+		pinctrl-1 = <&i2c0_gpio44>;
+
+		i2c0_0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c0_1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		status = "okay";
+	};
+
+	reset: reset {
+		compatible = "raspberrypi,firmware-reset";
+		#reset-cells = <1>;
+	};
+};
+
+&hdmi0 {
+	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
+	clock-names = "hdmi", "bvb", "audio", "cec";
+	wifi-2.4ghz-coexistence;
+};
+
+&hdmi1 {
+	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
+	clock-names = "hdmi", "bvb", "audio", "cec";
+	wifi-2.4ghz-coexistence;
+};
+
+&hvs {
+	clocks = <&firmware_clocks 4>;
+};
+
+&i2c0 {
+	/delete-property/ pinctrl-names;
+	/delete-property/ pinctrl-0;
+};
+
+&pm {
+	clocks = <&firmware_clocks 5>,
+		 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+		 <&clocks BCM2835_CLOCK_H264>,
+		 <&clocks BCM2835_CLOCK_ISP>;
+	clock-names = "v3d", "peri_image", "h264", "isp";
+};
+
+&rmem {
+	/*
+	 * RPi4's co-processor will copy the board's bootloader configuration
+	 * into memory for the OS to consume. It'll also update this node with
+	 * its placement information.
+	 */
+	blconfig: nvram@0 {
+		compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x0 0x0>;
+		no-map;
+		status = "disabled";
+	};
+};
+
+&v3d {
+	clocks = <&firmware_clocks 5>;
+};
+
+&vchiq {
+	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711.dtsi b/arch/arm/boot/dts/broadcom/bcm2711.dtsi
new file mode 100644
index 000000000000..c06d9f5e53c8
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2711.dtsi
@@ -0,0 +1,1194 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm283x.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/bcm2835-pm.h>
+
+/ {
+	compatible = "brcm,bcm2711";
+
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gicv2>;
+
+	vc4: gpu {
+		compatible = "brcm,bcm2711-vc5";
+		status = "disabled";
+	};
+
+	clk_27MHz: clk-27M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+		clock-output-names = "27MHz-clock";
+	};
+
+	clk_108MHz: clk-108M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <108000000>;
+		clock-output-names = "108MHz-clock";
+	};
+
+	soc {
+		/*
+		 * Defined ranges:
+		 *   Common BCM283x peripherals
+		 *   BCM2711-specific peripherals
+		 *   ARM-local peripherals
+		 */
+		ranges = <0x7e000000  0x0 0xfe000000  0x01800000>,
+			 <0x7c000000  0x0 0xfc000000  0x02000000>,
+			 <0x40000000  0x0 0xff800000  0x00800000>;
+		/* Emulate a contiguous 30-bit address range for DMA */
+		dma-ranges = <0xc0000000  0x0 0x00000000  0x40000000>;
+
+		/*
+		 * This node is the provider for the enable-method for
+		 * bringing up secondary cores.
+		 */
+		local_intc: interrupt-controller@40000000 {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+		};
+
+		gicv2: interrupt-controller@40041000 {
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "arm,gic-400";
+			reg =	<0x40041000 0x1000>,
+				<0x40042000 0x2000>,
+				<0x40044000 0x2000>,
+				<0x40046000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		avs_monitor: avs-monitor@7d5d2000 {
+			compatible = "brcm,bcm2711-avs-monitor",
+				     "syscon", "simple-mfd";
+			reg = <0x7d5d2000 0xf00>;
+
+			thermal: thermal {
+				compatible = "brcm,bcm2711-thermal";
+				#thermal-sensor-cells = <0>;
+			};
+		};
+
+		dma: dma-controller@7e007000 {
+			compatible = "brcm,bcm2835-dma";
+			reg = <0x7e007000 0xb00>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     /* DMA lite 7 - 10 */
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma0",
+					  "dma1",
+					  "dma2",
+					  "dma3",
+					  "dma4",
+					  "dma5",
+					  "dma6",
+					  "dma7",
+					  "dma8",
+					  "dma9",
+					  "dma10";
+			#dma-cells = <1>;
+			brcm,dma-channel-mask = <0x07f5>;
+		};
+
+		pm: watchdog@7e100000 {
+			compatible = "brcm,bcm2711-pm", "brcm,bcm2835-pm-wdt";
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x7e100000 0x114>,
+			      <0x7e00a000 0x24>,
+			      <0x7ec11000 0x20>;
+			reg-names = "pm", "asb", "rpivid_asb";
+			clocks = <&clocks BCM2835_CLOCK_V3D>,
+				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+				 <&clocks BCM2835_CLOCK_H264>,
+				 <&clocks BCM2835_CLOCK_ISP>;
+			clock-names = "v3d", "peri_image", "h264", "isp";
+			system-power-controller;
+		};
+
+		rng@7e104000 {
+			compatible = "brcm,bcm2711-rng200";
+			reg = <0x7e104000 0x28>;
+		};
+
+		uart2: serial@7e201400 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201400 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00341011>;
+			status = "disabled";
+		};
+
+		uart3: serial@7e201600 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201600 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00341011>;
+			status = "disabled";
+		};
+
+		uart4: serial@7e201800 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201800 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00341011>;
+			status = "disabled";
+		};
+
+		uart5: serial@7e201a00 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201a00 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00341011>;
+			status = "disabled";
+		};
+
+		spi3: spi@7e204600 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204600 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi4: spi@7e204800 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204800 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi5: spi@7e204a00 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204a00 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi6: spi@7e204c00 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204c00 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@7e205600 {
+			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+			reg = <0x7e205600 0x200>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@7e205800 {
+			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+			reg = <0x7e205800 0x200>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@7e205a00 {
+			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+			reg = <0x7e205a00 0x200>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@7e205c00 {
+			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+			reg = <0x7e205c00 0x200>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pixelvalve0: pixelvalve@7e206000 {
+			compatible = "brcm,bcm2711-pixelvalve0";
+			reg = <0x7e206000 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pixelvalve1: pixelvalve@7e207000 {
+			compatible = "brcm,bcm2711-pixelvalve1";
+			reg = <0x7e207000 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pixelvalve2: pixelvalve@7e20a000 {
+			compatible = "brcm,bcm2711-pixelvalve2";
+			reg = <0x7e20a000 0x100>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@7e20c800 {
+			compatible = "brcm,bcm2835-pwm";
+			reg = <0x7e20c800 0x28>;
+			clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clock-rates = <10000000>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pixelvalve4: pixelvalve@7e216000 {
+			compatible = "brcm,bcm2711-pixelvalve4";
+			reg = <0x7e216000 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		hvs: hvs@7e400000 {
+			compatible = "brcm,bcm2711-hvs";
+			reg = <0x7e400000 0x8000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pixelvalve3: pixelvalve@7ec12000 {
+			compatible = "brcm,bcm2711-pixelvalve3";
+			reg = <0x7ec12000 0x100>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		vec: vec@7ec13000 {
+			compatible = "brcm,bcm2711-vec";
+			reg = <0x7ec13000 0x1000>;
+			clocks = <&clocks BCM2835_CLOCK_VEC>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		dvp: clock@7ef00000 {
+			compatible = "brcm,brcm2711-dvp";
+			reg = <0x7ef00000 0x10>;
+			clocks = <&clk_108MHz>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		aon_intr: interrupt-controller@7ef00100 {
+			compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
+			reg = <0x7ef00100 0x30>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		hdmi0: hdmi@7ef00700 {
+			compatible = "brcm,bcm2711-hdmi0";
+			reg = <0x7ef00700 0x300>,
+			      <0x7ef00300 0x200>,
+			      <0x7ef00f00 0x80>,
+			      <0x7ef00f80 0x80>,
+			      <0x7ef01b00 0x200>,
+			      <0x7ef01f00 0x400>,
+			      <0x7ef00200 0x80>,
+			      <0x7ef04300 0x100>,
+			      <0x7ef20000 0x100>;
+			reg-names = "hdmi",
+				    "dvp",
+				    "phy",
+				    "rm",
+				    "packet",
+				    "metadata",
+				    "csc",
+				    "cec",
+				    "hd";
+			clock-names = "hdmi", "bvb", "audio", "cec";
+			resets = <&dvp 0>;
+			interrupt-parent = <&aon_intr>;
+			interrupts = <0>, <1>, <2>,
+				     <3>, <4>, <5>;
+			interrupt-names = "cec-tx", "cec-rx", "cec-low",
+					  "wakeup", "hpd-connected", "hpd-removed";
+			ddc = <&ddc0>;
+			dmas = <&dma 10>;
+			dma-names = "audio-rx";
+			status = "disabled";
+		};
+
+		ddc0: i2c@7ef04500 {
+			compatible = "brcm,bcm2711-hdmi-i2c";
+			reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
+			reg-names = "bsc", "auto-i2c";
+			clock-frequency = <97500>;
+			status = "disabled";
+		};
+
+		hdmi1: hdmi@7ef05700 {
+			compatible = "brcm,bcm2711-hdmi1";
+			reg = <0x7ef05700 0x300>,
+			      <0x7ef05300 0x200>,
+			      <0x7ef05f00 0x80>,
+			      <0x7ef05f80 0x80>,
+			      <0x7ef06b00 0x200>,
+			      <0x7ef06f00 0x400>,
+			      <0x7ef00280 0x80>,
+			      <0x7ef09300 0x100>,
+			      <0x7ef20000 0x100>;
+			reg-names = "hdmi",
+				    "dvp",
+				    "phy",
+				    "rm",
+				    "packet",
+				    "metadata",
+				    "csc",
+				    "cec",
+				    "hd";
+			ddc = <&ddc1>;
+			clock-names = "hdmi", "bvb", "audio", "cec";
+			resets = <&dvp 1>;
+			interrupt-parent = <&aon_intr>;
+			interrupts = <8>, <7>, <6>,
+				     <9>, <10>, <11>;
+			interrupt-names = "cec-tx", "cec-rx", "cec-low",
+					  "wakeup", "hpd-connected", "hpd-removed";
+			dmas = <&dma 17>;
+			dma-names = "audio-rx";
+			status = "disabled";
+		};
+
+		ddc1: i2c@7ef09500 {
+			compatible = "brcm,bcm2711-hdmi-i2c";
+			reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>;
+			reg-names = "bsc", "auto-i2c";
+			clock-frequency = <97500>;
+			status = "disabled";
+		};
+	};
+
+	/*
+	 * emmc2 has different DMA constraints based on SoC revisions. It was
+	 * moved into its own bus, so as for RPi4's firmware to update them.
+	 * The firmware will find whether the emmc2bus alias is defined, and if
+	 * so, it'll edit the dma-ranges property below accordingly.
+	 */
+	emmc2bus: emmc2bus {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0x0 0x7e000000  0x0 0xfe000000  0x01800000>;
+		dma-ranges = <0x0 0xc0000000  0x0 0x00000000  0x40000000>;
+
+		emmc2: mmc@7e340000 {
+			compatible = "brcm,bcm2711-emmc2";
+			reg = <0x0 0x7e340000 0x100>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2711_CLOCK_EMMC2>;
+			status = "disabled";
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/100095/0003
+		 * /Level-1-Memory-System/About-the-L1-memory-system?lang=en
+		 * Source for d/i-cache-size
+		 * https://www.raspberrypi.com/documentation/computers
+		 * /processors.html#bcm2711
+		 */
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 *  https://developer.arm.com/documentation/100095/0003
+		 *  /Level-2-Memory-System/About-the-L2-memory-system?lang=en
+		 *  Source for d/i-cache-size
+		 *  https://www.raspberrypi.com/documentation/computers
+		 *  /processors.html#bcm2711
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
+			cache-level = <2>;
+		};
+	};
+
+	scb {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>,
+			 <0x6 0x00000000  0x6 0x00000000  0x40000000>;
+
+		pcie0: pcie@7d500000 {
+			compatible = "brcm,bcm2711-pcie";
+			reg = <0x0 0x7d500000 0x9310>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 144
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 145
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 146
+							IRQ_TYPE_LEVEL_HIGH>;
+			msi-controller;
+			msi-parent = <&pcie0>;
+
+			ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
+				  0x0 0x04000000>;
+			/*
+			 * The wrapper around the PCIe block has a bug
+			 * preventing it from accessing beyond the first 3GB of
+			 * memory.
+			 */
+			dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
+				      0x0 0xc0000000>;
+			brcm,enable-ssc;
+		};
+
+		genet: ethernet@7d580000 {
+			compatible = "brcm,bcm2711-genet-v5";
+			reg = <0x0 0x7d580000 0x10000>;
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+
+			genet_mdio: mdio@e14 {
+				compatible = "brcm,genet-mdio-v5";
+				reg = <0xe14 0x8>;
+				reg-names = "mdio";
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+			};
+		};
+
+		xhci: usb@7e9c0000 {
+			compatible = "brcm,bcm2711-xhci", "brcm,xhci-brcm-v2";
+			reg = <0x0 0x7e9c0000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pm BCM2835_POWER_DOMAIN_USB>;
+			/* DWC2 and this IP block share the same USB PHY,
+			 * enabling both at the same time results in lockups.
+			 * So keep this node disabled and let the bootloader
+			 * decide which interface should be enabled.
+			 */
+			status = "disabled";
+		};
+
+		v3d: gpu@7ec00000 {
+			compatible = "brcm,2711-v3d";
+			reg = <0x0 0x7ec00000 0x4000>,
+			      <0x0 0x7ec04000 0x4000>;
+			reg-names = "hub", "core0";
+
+			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
+			resets = <&pm BCM2835_RESET_V3D>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
+
+&clk_osc {
+	clock-frequency = <54000000>;
+};
+
+&clocks {
+	compatible = "brcm,bcm2711-cprman";
+};
+
+&cpu_thermal {
+	coefficients = <(-487) 410040>;
+	thermal-sensors = <&thermal>;
+};
+
+&dsi0 {
+	interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&dsi1 {
+	interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+	compatible = "brcm,bcm2711-dsi1";
+};
+
+&gpio {
+	compatible = "brcm,bcm2711-gpio";
+	interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+
+	gpio-ranges = <&gpio 0 0 58>;
+
+	gpclk0_gpio49: gpclk0-gpio49 {
+		pin-gpclk {
+			pins = "gpio49";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+	gpclk1_gpio50: gpclk1-gpio50 {
+		pin-gpclk {
+			pins = "gpio50";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+	gpclk2_gpio51: gpclk2-gpio51 {
+		pin-gpclk {
+			pins = "gpio51";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+
+	i2c0_gpio46: i2c0-gpio46 {
+		pin-sda {
+			function = "alt0";
+			pins = "gpio46";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt0";
+			pins = "gpio47";
+			bias-disable;
+		};
+	};
+	i2c1_gpio46: i2c1-gpio46 {
+		pin-sda {
+			function = "alt1";
+			pins = "gpio46";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt1";
+			pins = "gpio47";
+			bias-disable;
+		};
+	};
+	i2c3_gpio2: i2c3-gpio2 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio2";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio3";
+			bias-disable;
+		};
+	};
+	i2c3_gpio4: i2c3-gpio4 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio4";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio5";
+			bias-disable;
+		};
+	};
+	i2c4_gpio6: i2c4-gpio6 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio6";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio7";
+			bias-disable;
+		};
+	};
+	i2c4_gpio8: i2c4-gpio8 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio8";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio9";
+			bias-disable;
+		};
+	};
+	i2c5_gpio10: i2c5-gpio10 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio10";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio11";
+			bias-disable;
+		};
+	};
+	i2c5_gpio12: i2c5-gpio12 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio12";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio13";
+			bias-disable;
+		};
+	};
+	i2c6_gpio0: i2c6-gpio0 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio0";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio1";
+			bias-disable;
+		};
+	};
+	i2c6_gpio22: i2c6-gpio22 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio22";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio23";
+			bias-disable;
+		};
+	};
+	i2c_slave_gpio8: i2c-slave-gpio8 {
+		pins-i2c-slave {
+			pins = "gpio8",
+			       "gpio9",
+			       "gpio10",
+			       "gpio11";
+			function = "alt3";
+		};
+	};
+
+	jtag_gpio48: jtag-gpio48 {
+		pins-jtag {
+			pins = "gpio48",
+			       "gpio49",
+			       "gpio50",
+			       "gpio51",
+			       "gpio52",
+			       "gpio53";
+			function = "alt4";
+		};
+	};
+
+	mii_gpio28: mii-gpio28 {
+		pins-mii {
+			pins = "gpio28",
+			       "gpio29",
+			       "gpio30",
+			       "gpio31";
+			function = "alt4";
+		};
+	};
+	mii_gpio36: mii-gpio36 {
+		pins-mii {
+			pins = "gpio36",
+			       "gpio37",
+			       "gpio38",
+			       "gpio39";
+			function = "alt5";
+		};
+	};
+
+	pcm_gpio50: pcm-gpio50 {
+		pins-pcm {
+			pins = "gpio50",
+			       "gpio51",
+			       "gpio52",
+			       "gpio53";
+			function = "alt2";
+		};
+	};
+
+	pwm0_0_gpio12: pwm0-0-gpio12 {
+		pin-pwm {
+			pins = "gpio12";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_0_gpio18: pwm0-0-gpio18 {
+		pin-pwm {
+			pins = "gpio18";
+			function = "alt5";
+			bias-disable;
+		};
+	};
+	pwm1_0_gpio40: pwm1-0-gpio40 {
+		pin-pwm {
+			pins = "gpio40";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_1_gpio13: pwm0-1-gpio13 {
+		pin-pwm {
+			pins = "gpio13";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_1_gpio19: pwm0-1-gpio19 {
+		pin-pwm {
+			pins = "gpio19";
+			function = "alt5";
+			bias-disable;
+		};
+	};
+	pwm1_1_gpio41: pwm1-1-gpio41 {
+		pin-pwm {
+			pins = "gpio41";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_1_gpio45: pwm0-1-gpio45 {
+		pin-pwm {
+			pins = "gpio45";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_0_gpio52: pwm0-0-gpio52 {
+		pin-pwm {
+			pins = "gpio52";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+	pwm0_1_gpio53: pwm0-1-gpio53 {
+		pin-pwm {
+			pins = "gpio53";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+
+	rgmii_gpio35: rgmii-gpio35 {
+		pin-start-stop {
+			pins = "gpio35";
+			function = "alt4";
+		};
+		pin-rx-ok {
+			pins = "gpio36";
+			function = "alt4";
+		};
+	};
+	rgmii_irq_gpio34: rgmii-irq-gpio34 {
+		pin-irq {
+			pins = "gpio34";
+			function = "alt5";
+		};
+	};
+	rgmii_irq_gpio39: rgmii-irq-gpio39 {
+		pin-irq {
+			pins = "gpio39";
+			function = "alt4";
+		};
+	};
+	rgmii_mdio_gpio28: rgmii-mdio-gpio28 {
+		pins-mdio {
+			pins = "gpio28",
+			       "gpio29";
+			function = "alt5";
+		};
+	};
+	rgmii_mdio_gpio37: rgmii-mdio-gpio37 {
+		pins-mdio {
+			pins = "gpio37",
+			       "gpio38";
+			function = "alt4";
+		};
+	};
+
+	spi0_gpio46: spi0-gpio46 {
+		pins-spi {
+			pins = "gpio46",
+			       "gpio47",
+			       "gpio48",
+			       "gpio49";
+			function = "alt2";
+		};
+	};
+	spi2_gpio46: spi2-gpio46 {
+		pins-spi {
+			pins = "gpio46",
+			       "gpio47",
+			       "gpio48",
+			       "gpio49",
+			       "gpio50";
+			function = "alt5";
+		};
+	};
+	spi3_gpio0: spi3-gpio0 {
+		pins-spi {
+			pins = "gpio0",
+			       "gpio1",
+			       "gpio2",
+			       "gpio3";
+			function = "alt3";
+		};
+	};
+	spi4_gpio4: spi4-gpio4 {
+		pins-spi {
+			pins = "gpio4",
+			       "gpio5",
+			       "gpio6",
+			       "gpio7";
+			function = "alt3";
+		};
+	};
+	spi5_gpio12: spi5-gpio12 {
+		pins-spi {
+			pins = "gpio12",
+			       "gpio13",
+			       "gpio14",
+			       "gpio15";
+			function = "alt3";
+		};
+	};
+	spi6_gpio18: spi6-gpio18 {
+		pins-spi {
+			pins = "gpio18",
+			       "gpio19",
+			       "gpio20",
+			       "gpio21";
+			function = "alt3";
+		};
+	};
+
+	uart2_gpio0: uart2-gpio0 {
+		pin-tx {
+			pins = "gpio0";
+			function = "alt4";
+			bias-disable;
+		};
+		pin-rx {
+			pins = "gpio1";
+			function = "alt4";
+			bias-pull-up;
+		};
+	};
+	uart2_ctsrts_gpio2: uart2-ctsrts-gpio2 {
+		pin-cts {
+			pins = "gpio2";
+			function = "alt4";
+			bias-pull-up;
+		};
+		pin-rts {
+			pins = "gpio3";
+			function = "alt4";
+			bias-disable;
+		};
+	};
+	uart3_gpio4: uart3-gpio4 {
+		pin-tx {
+			pins = "gpio4";
+			function = "alt4";
+			bias-disable;
+		};
+		pin-rx {
+			pins = "gpio5";
+			function = "alt4";
+			bias-pull-up;
+		};
+	};
+	uart3_ctsrts_gpio6: uart3-ctsrts-gpio6 {
+		pin-cts {
+			pins = "gpio6";
+			function = "alt4";
+			bias-pull-up;
+		};
+		pin-rts {
+			pins = "gpio7";
+			function = "alt4";
+			bias-disable;
+		};
+	};
+	uart4_gpio8: uart4-gpio8 {
+		pin-tx {
+			pins = "gpio8";
+			function = "alt4";
+			bias-disable;
+		};
+		pin-rx {
+			pins = "gpio9";
+			function = "alt4";
+			bias-pull-up;
+		};
+	};
+	uart4_ctsrts_gpio10: uart4-ctsrts-gpio10 {
+		pin-cts {
+			pins = "gpio10";
+			function = "alt4";
+			bias-pull-up;
+		};
+		pin-rts {
+			pins = "gpio11";
+			function = "alt4";
+			bias-disable;
+		};
+	};
+	uart5_gpio12: uart5-gpio12 {
+		pin-tx {
+			pins = "gpio12";
+			function = "alt4";
+			bias-disable;
+		};
+		pin-rx {
+			pins = "gpio13";
+			function = "alt4";
+			bias-pull-up;
+		};
+	};
+	uart5_ctsrts_gpio14: uart5-ctsrts-gpio14 {
+		pin-cts {
+			pins = "gpio14";
+			function = "alt4";
+			bias-pull-up;
+		};
+		pin-rts {
+			pins = "gpio15";
+			function = "alt4";
+			bias-disable;
+		};
+	};
+};
+
+&rmem {
+	#address-cells = <2>;
+};
+
+&csi0 {
+	interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&csi1 {
+	interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&cma {
+	/*
+	 * arm64 reserves the CMA by default somewhere in ZONE_DMA32,
+	 * that's not good enough for the BCM2711 as some devices can
+	 * only address the lower 1G of memory (ZONE_DMA).
+	 */
+	alloc-ranges = <0x0 0x00000000 0x40000000>;
+};
+
+&i2c0 {
+	compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c1 {
+	compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mailbox {
+	interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sdhci {
+	interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sdhost {
+	interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&spi {
+	interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&spi1 {
+	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&spi2 {
+	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&system_timer {
+	interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&txp {
+	interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart0 {
+	arm,primecell-periphid = <0x00341011>;
+	interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart1 {
+	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&vec {
+	compatible = "brcm,bcm2711-vec";
+	interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm28155-ap.dts b/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
new file mode 100644
index 000000000000..cefaa9a3c45c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2013 Broadcom Corporation
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm11351.dtsi"
+
+/ {
+	model = "BCM28155 AP board";
+	compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+};
+
+&bsc1 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&bsc2 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&bsc3 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&pmu_bsc {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pmu: pmu@8 {
+		compatible = "brcm,bcm59056";
+		interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x08>;
+
+		regulators {
+			camldo1_reg: camldo1 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			sdldo_reg: sdldo {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			sdxldo_reg: sdxldo {
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			usbldo_reg: usbldo {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			iosr1_reg: iosr1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&pwm {
+	status = "okay";
+};
+
+&sdio2 {
+	non-removable;
+	max-frequency = <48000000>;
+	vmmc-supply = <&camldo1_reg>;
+	vqmmc-supply = <&iosr1_reg>;
+	status = "okay";
+};
+
+&sdio4 {
+	max-frequency = <48000000>;
+	cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&sdldo_reg>;
+	vqmmc-supply = <&sdxldo_reg>;
+	status = "okay";
+};
+
+&uartb {
+	status = "okay";
+};
+
+&usbotg {
+	vusb_d-supply = <&usbldo_reg>;
+	vusb_a-supply = <&iosr1_reg>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-common.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-common.dtsi
new file mode 100644
index 000000000000..9261b67dbee1
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-common.dtsi
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* This include file covers the common peripherals and configuration between
+ * bcm2835, bcm2836 and bcm2837 implementations.
+ */
+
+/ {
+	interrupt-parent = <&intc>;
+
+	soc {
+		dma: dma-controller@7e007000 {
+			compatible = "brcm,bcm2835-dma";
+			reg = <0x7e007000 0xf00>;
+			interrupts = <1 16>,
+				     <1 17>,
+				     <1 18>,
+				     <1 19>,
+				     <1 20>,
+				     <1 21>,
+				     <1 22>,
+				     <1 23>,
+				     <1 24>,
+				     <1 25>,
+				     <1 26>,
+				     /* dma channel 11-14 share one irq */
+				     <1 27>,
+				     <1 27>,
+				     <1 27>,
+				     <1 27>,
+				     /* unused shared irq for all channels */
+				     <1 28>;
+			interrupt-names = "dma0",
+					  "dma1",
+					  "dma2",
+					  "dma3",
+					  "dma4",
+					  "dma5",
+					  "dma6",
+					  "dma7",
+					  "dma8",
+					  "dma9",
+					  "dma10",
+					  "dma11",
+					  "dma12",
+					  "dma13",
+					  "dma14",
+					  "dma-shared-all";
+			#dma-cells = <1>;
+			brcm,dma-channel-mask = <0x7f35>;
+		};
+
+		intc: interrupt-controller@7e00b200 {
+			compatible = "brcm,bcm2835-armctrl-ic";
+			reg = <0x7e00b200 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm: watchdog@7e100000 {
+			compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x7e100000 0x114>,
+			      <0x7e00a000 0x24>;
+			reg-names = "pm", "asb";
+			clocks = <&clocks BCM2835_CLOCK_V3D>,
+				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+				 <&clocks BCM2835_CLOCK_H264>,
+				 <&clocks BCM2835_CLOCK_ISP>;
+			clock-names = "v3d", "peri_image", "h264", "isp";
+			system-power-controller;
+		};
+
+		rng@7e104000 {
+			compatible = "brcm,bcm2835-rng";
+			reg = <0x7e104000 0x10>;
+			interrupts = <2 29>;
+		};
+
+		pixelvalve@7e206000 {
+			compatible = "brcm,bcm2835-pixelvalve0";
+			reg = <0x7e206000 0x100>;
+			interrupts = <2 13>; /* pwa0 */
+		};
+
+		pixelvalve@7e207000 {
+			compatible = "brcm,bcm2835-pixelvalve1";
+			reg = <0x7e207000 0x100>;
+			interrupts = <2 14>; /* pwa1 */
+		};
+
+		thermal: thermal@7e212000 {
+			compatible = "brcm,bcm2835-thermal";
+			reg = <0x7e212000 0x8>;
+			clocks = <&clocks BCM2835_CLOCK_TSENS>;
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@7e805000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e805000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+		};
+
+		vec: vec@7e806000 {
+			compatible = "brcm,bcm2835-vec";
+			reg = <0x7e806000 0x1000>;
+			clocks = <&clocks BCM2835_CLOCK_VEC>;
+			interrupts = <2 27>;
+			status = "disabled";
+		};
+
+		pixelvalve@7e807000 {
+			compatible = "brcm,bcm2835-pixelvalve2";
+			reg = <0x7e807000 0x100>;
+			interrupts = <2 10>; /* pixelvalve */
+		};
+
+		hdmi: hdmi@7e902000 {
+			compatible = "brcm,bcm2835-hdmi";
+			reg = <0x7e902000 0x600>,
+			      <0x7e808000 0x100>;
+			interrupts = <2 8>, <2 9>;
+			ddc = <&i2c2>;
+			clocks = <&clocks BCM2835_PLLH_PIX>,
+				 <&clocks BCM2835_CLOCK_HSM>;
+			clock-names = "pixel", "hdmi";
+			dmas = <&dma 17>;
+			dma-names = "audio-rx";
+			status = "disabled";
+		};
+
+		v3d: v3d@7ec00000 {
+			compatible = "brcm,bcm2835-v3d";
+			reg = <0x7ec00000 0x1000>;
+			interrupts = <1 10>;
+		};
+
+		vc4: gpu {
+			compatible = "brcm,bcm2835-vc4";
+		};
+	};
+};
+
+&cpu_thermal {
+	thermal-sensors = <&thermal>;
+};
+
+&gpio {
+	i2c_slave_gpio18: i2c-slave-gpio18 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+	};
+
+	jtag_gpio4: jtag-gpio4 {
+		brcm,pins = <4 5 6 12 13>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+
+	pwm0_gpio12: pwm0-gpio12 {
+		brcm,pins = <12>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+	pwm0_gpio18: pwm0-gpio18 {
+		brcm,pins = <18>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+	pwm0_gpio40: pwm0-gpio40 {
+		brcm,pins = <40>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+	pwm1_gpio13: pwm1-gpio13 {
+		brcm,pins = <13>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+	pwm1_gpio19: pwm1-gpio19 {
+		brcm,pins = <19>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+	pwm1_gpio41: pwm1-gpio41 {
+		brcm,pins = <41>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+	pwm1_gpio45: pwm1-gpio45 {
+		brcm,pins = <45>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&i2s {
+	dmas = <&dma 2>, <&dma 3>;
+	dma-names = "tx", "rx";
+};
+
+&sdhost {
+	dmas = <&dma 13>;
+	dma-names = "rx-tx";
+};
+
+&spi {
+	dmas = <&dma 6>, <&dma 7>;
+	dma-names = "tx", "rx";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-a-plus.dts
new file mode 100644
index 000000000000..069b48272aa5
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-a-plus.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
+	model = "Raspberry Pi Model A+";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * This is based on the unreleased schematic for the Model A+.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "", /* GPIO30 */
+			  "", /* GPIO31 */
+			  "CAM_GPIO1", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "PWR_LOW_N", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "USB_LIMIT", /* GPIO38 */
+			  "", /* GPIO39 */
+			  "PWM0_OUT", /* GPIO40 */
+			  "CAM_GPIO0", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
+			  "PWM1_OUT", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-a.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-a.dts
new file mode 100644
index 000000000000..2726c00431e8
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-a.dts
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-a", "brcm,bcm2835";
+	model = "Raspberry Pi Model A";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf
+	 * RPI00021 sheet 02
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "CAM_GPIO1",
+			  "LAN_RUN",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "", /* GPIO12 */
+			  "", /* GPIO13 */
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "STATUS_LED_N",
+			  "GPIO17",
+			  "GPIO18",
+			  "", /* GPIO19 */
+			  "", /* GPIO20 */
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "", /* GPIO26 */
+			  "CAM_GPIO0",
+			  /* Binary number representing build/revision */
+			  "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "CONFIG3",
+			  "", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
+			  "PWM0_OUT",
+			  "", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
+			  "PWM1_OUT",
+			  "HDMI_HPD_P",
+			  "SD_CARD_DET",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
+
+	/* I2S interface */
+	i2s_alt2: i2s_alt2 {
+		brcm,pins = <28 29 30 31>;
+		brcm,function = <BCM2835_FSEL_ALT2>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-plus.dts
new file mode 100644
index 000000000000..c57b999a4520
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-plus.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
+	model = "Raspberry Pi Model B+";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from Raspberry-Pi-B-Plus-V1.2-Schematics.pdf
+	 * RPI-BPLUS sheet 1
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "", /* GPIO30 */
+			  "LAN_RUN", /* GPIO31 */
+			  "CAM_GPIO1", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "PWR_LOW_N", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "USB_LIMIT", /* GPIO38 */
+			  "", /* GPIO39 */
+			  "PWM0_OUT", /* GPIO40 */
+			  "CAM_GPIO0", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "ETH_CLK", /* GPIO44 */
+			  "PWM1_OUT", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-rev2.dts
new file mode 100644
index 000000000000..ae6d3a9586ab
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-rev2.dts
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-smsc9512.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
+	model = "Raspberry Pi Model B rev2";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from Raspberry-Pi-Rev-2.0-Model-AB-Schematics.pdf
+	 * RPI00022 sheet 02
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "CAM_CLK",
+			  "LAN_RUN",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "", /* GPIO12 */
+			  "", /* GPIO13 */
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "STATUS_LED_N",
+			  "GPIO17",
+			  "GPIO18",
+			  "", /* GPIO19 */
+			  "", /* GPIO20 */
+			  "CAM_GPIO",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "", /* GPIO26 */
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
+			  "PWM0_OUT",
+			  "", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
+			  "PWM1_OUT",
+			  "HDMI_HPD_P",
+			  "SD_CARD_DET",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
+
+	/* I2S interface */
+	i2s_alt2: i2s_alt2 {
+		brcm,pins = <28 29 30 31>;
+		brcm,function = <BCM2835_FSEL_ALT2>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-b.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b.dts
new file mode 100644
index 000000000000..72764be75a79
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b.dts
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-smsc9512.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b", "brcm,bcm2835";
+	model = "Raspberry Pi Model B";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf
+	 * RPI00021 sheet 02
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "CAM_GPIO1",
+			  "LAN_RUN",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "", /* GPIO12 */
+			  "", /* GPIO13 */
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "STATUS_LED_N",
+			  "GPIO17",
+			  "GPIO18",
+			  "", /* GPIO19 */
+			  "", /* GPIO20 */
+			  "CAM_GPIO0",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "", /* GPIO26 */
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
+			  "PWM0_OUT",
+			  "", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
+			  "PWM1_OUT",
+			  "HDMI_HPD_P",
+			  "SD_CARD_DET",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1-io1.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1-io1.dts
new file mode 100644
index 000000000000..3f9d198ac3ab
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1-io1.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835-rpi-cm1.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,compute-module", "brcm,bcm2835";
+	model = "Raspberry Pi Compute Module IO board rev1";
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "GPIO0",
+			  "GPIO1",
+			  "GPIO2",
+			  "GPIO3",
+			  "GPIO4",
+			  "GPIO5",
+			  "GPIO6",
+			  "GPIO7",
+			  "GPIO8",
+			  "GPIO9",
+			  "GPIO10",
+			  "GPIO11",
+			  "GPIO12",
+			  "GPIO13",
+			  "GPIO14",
+			  "GPIO15",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "GPIO32",
+			  "GPIO33",
+			  "GPIO34",
+			  "GPIO35",
+			  "GPIO36",
+			  "GPIO37",
+			  "GPIO38",
+			  "GPIO39",
+			  "GPIO40",
+			  "GPIO41",
+			  "GPIO42",
+			  "GPIO43",
+			  "GPIO44",
+			  "GPIO45",
+			  "HDMI_HPD_N",
+			  /* Also used as ACT LED */
+			  "EMMC_EN_N",
+			  /* Used by eMMC */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1.dtsi
new file mode 100644
index 000000000000..750cd76948e3
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+
+/ {
+	leds {
+		led-act {
+			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
+	reg_3v3: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_1v8: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+};
+
+&sdhost {
+	non-removable;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_1v8>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-common.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-rpi-common.dtsi
new file mode 100644
index 000000000000..fa9d784c88b6
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-common.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This include file covers the common peripherals and configuration between
+ * bcm2835, bcm2836 and bcm2837 implementations that interact with RPi's
+ * firmware interface.
+ */
+
+#include <dt-bindings/power/raspberrypi-power.h>
+
+&hdmi {
+	clocks = <&firmware_clocks 9>,
+		 <&firmware_clocks 13>;
+	clock-names = "pixel", "hdmi";
+};
+
+&pm {
+	clocks = <&firmware_clocks 5>,
+		 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+		 <&clocks BCM2835_CLOCK_H264>,
+		 <&clocks BCM2835_CLOCK_ISP>;
+	clock-names = "v3d", "peri_image", "h264", "isp";
+};
+
+&v3d {
+	clocks = <&firmware_clocks 5>;
+	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
+};
+
+&vec {
+	clocks = <&firmware_clocks 15>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero-w.dts
new file mode 100644
index 000000000000..1f0b163e400c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero-w.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Stefan Wahren <stefan.wahren@i2se.com>
+ */
+
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-otg.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
+	model = "Raspberry Pi Zero W";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&bt {
+	shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "CAM_GPIO1", /* GPIO40 */
+			  "WL_ON", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "WIFI_CLK", /* GPIO43 */
+			  "CAM_GPIO0", /* GPIO44 */
+			  "BT_ON", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED_N",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+};
+
+&sdhci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero.dts
new file mode 100644
index 000000000000..539c19c10946
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Stefan Wahren <stefan.wahren@i2se.com>
+ */
+
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-otg.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero", "brcm,bcm2835";
+	model = "Raspberry Pi Zero";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "", /* GPIO30 */
+			  "", /* GPIO31 */
+			  "CAM_GPIO1", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
+			  "", /* GPIO40 */
+			  "CAM_GPIO0", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
+			  "", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED_N",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi
new file mode 100644
index 000000000000..e9bf41b9f5c1
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi
@@ -0,0 +1,84 @@
+#include <dt-bindings/power/raspberrypi-power.h>
+
+/ {
+	soc {
+		firmware: firmware {
+			compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
+			mboxes = <&mailbox>;
+
+			firmware_clocks: clocks {
+				compatible = "raspberrypi,firmware-clocks";
+				#clock-cells = <1>;
+			};
+		};
+
+		power: power {
+			compatible = "raspberrypi,bcm2835-power";
+			firmware = <&firmware>;
+			#power-domain-cells = <1>;
+		};
+
+		vchiq: mailbox@7e00b840 {
+			compatible = "brcm,bcm2835-vchiq";
+			reg = <0x7e00b840 0x3c>;
+			interrupts = <0 2>;
+		};
+	};
+};
+
+&csi0 {
+	clocks = <&clocks BCM2835_CLOCK_CAM0>,
+		 <&firmware_clocks 4>;
+	clock-names = "lp", "vpu";
+	power-domains = <&power RPI_POWER_DOMAIN_UNICAM0>;
+};
+
+&csi1 {
+	clocks = <&clocks BCM2835_CLOCK_CAM1>,
+		 <&firmware_clocks 4>;
+	clock-names = "lp", "vpu";
+	power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>;
+};
+
+&gpio {
+	gpioout: gpioout {
+		brcm,pins = <6>;
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+	};
+
+	alt0: alt0 {
+		brcm,pins = <4 5 7 8 9 10 11>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_gpio0>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_gpio2>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&usb {
+	power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
+
+&vec {
+	power-domains = <&power RPI_POWER_DOMAIN_VEC>;
+	status = "okay";
+};
+
+&dsi0 {
+	power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
+};
+
+&dsi1 {
+	power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835.dtsi b/arch/arm/boot/dts/broadcom/bcm2835.dtsi
new file mode 100644
index 000000000000..15cb331febbb
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm283x.dtsi"
+#include "bcm2835-common.dtsi"
+
+/ {
+	compatible = "brcm,bcm2835";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm1176jzf-s";
+			reg = <0x0>;
+			/* Source for d/i-cache-line-size and d/i-cache-sets
+			 * https://developer.arm.com/documentation/ddi0301
+			 * /h/level-one-memory-system/cache-organization?lang=en
+			 *
+			 * Source for d/i-cache-size
+			 * https://forums.raspberrypi.com/viewtopic.php?t=98428
+			 *
+			 * NOTE: The BCM2835 has a L2 cache but it is dedicated to the GPU
+			 * It can be shared with the CPU through fw settings,
+			 * but this is not recommended.
+			 */
+			d-cache-size = <0x4000>;
+			d-cache-line-size = <16>;
+			d-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set
+			i-cache-size = <0x4000>;
+			i-cache-line-size = <16>;
+			i-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set
+		};
+	};
+
+	soc {
+		ranges = <0x7e000000 0x20000000 0x02000000>;
+		dma-ranges = <0x40000000 0x00000000 0x20000000>;
+	};
+
+	arm-pmu {
+		compatible = "arm,arm1176-pmu";
+	};
+};
+
+&cpu_thermal {
+	coefficients = <(-538)	407000>;
+};
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2835-thermal";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/broadcom/bcm2836-rpi-2-b.dts
new file mode 100644
index 000000000000..79918033750e
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2836-rpi-2-b.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2836.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
+	model = "Raspberry Pi 2 Model B";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from rpi_SCH_2b_1p2_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "", /* GPIO30 */
+			  "LAN_RUN",
+			  "CAM_GPIO1",
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "PWR_LOW_N",
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "USB_LIMIT",
+			  "", /* GPIO39 */
+			  "PWM0_OUT",
+			  "CAM_GPIO0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  "ETH_CLK",
+			  "PWM1_OUT",
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2836-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2836-rpi.dtsi
new file mode 100644
index 000000000000..48b03b55ff56
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2836-rpi.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+
+&vchiq {
+	compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2836.dtsi b/arch/arm/boot/dts/broadcom/bcm2836.dtsi
new file mode 100644
index 000000000000..783fe624ba68
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2836.dtsi
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm283x.dtsi"
+#include "bcm2835-common.dtsi"
+
+/ {
+	compatible = "brcm,bcm2836";
+
+	soc {
+		ranges = <0x7e000000 0x3f000000 0x1000000>,
+			 <0x40000000 0x40000000 0x00001000>;
+		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
+
+		local_intc: interrupt-controller@40000000 {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&local_intc>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupt-parent = <&local_intc>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&local_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI
+			     <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI
+			     <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI
+			     <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI
+		always-on;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm2836-smp";
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/ddi0464/f/L1-Memory-System
+		 * /About-the-L1-memory-system?lang=en
+		 *
+		 * Source for d/i-cache-size
+		 * https://forums.raspberrypi.com/viewtopic.php?t=98428
+		 */
+
+		v7_cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		v7_cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		v7_cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf02>;
+			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		v7_cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf03>;
+			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for cache-line-size + cache-sets
+		 * https://developer.arm.com/documentation/ddi0464/f/L2-Memory-System
+		 * /About-the-L2-Memory-system?lang=en
+		 * Source for cache-size
+		 * https://forums.raspberrypi.com/viewtopic.php?t=98428
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>; // 512KiB(size)/64(line-size)=8192ways/8-way set
+			cache-level = <2>;
+		};
+	};
+};
+
+/* Make the BCM2835-style global interrupt controller be a child of the
+ * CPU-local interrupt controller.
+ */
+&intc {
+	compatible = "brcm,bcm2836-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-parent = <&local_intc>;
+	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&cpu_thermal {
+	coefficients = <(-538)	407000>;
+};
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2836-thermal";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dts
new file mode 100644
index 000000000000..1868cee05853
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,2-model-b-rev2", "brcm,bcm2837";
+	model = "Raspberry Pi 2 Model B rev 1.2";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from rpi_SCH_2b_1p2_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "GPIO2",
+			  "GPIO3",
+			  "GPIO4",
+			  "GPIO5",
+			  "GPIO6",
+			  "GPIO7",
+			  "GPIO8",
+			  "GPIO9",
+			  "GPIO10",
+			  "GPIO11",
+			  "GPIO12",
+			  "GPIO13",
+			  "GPIO14",
+			  "GPIO15",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "", /* GPIO30 */
+			  "LAN_RUN",
+			  "CAM_GPIO1",
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "PWR_LOW_N",
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "USB_LIMIT",
+			  "", /* GPIO39 */
+			  "PWM0_OUT",
+			  "CAM_GPIO0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  "ETH_CLK",
+			  "PWM1_OUT",
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts
new file mode 100644
index 000000000000..3548306dfbcb
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837";
+	model = "Raspberry Pi 3 Model A+";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "",
+				  "BT_WL_ON",
+				  "STATUS_LED_R",
+				  "",
+				  "",
+				  "CAM_GPIO0",
+				  "CAM_GPIO1",
+				  "";
+		status = "okay";
+	};
+};
+
+&gpio {
+	/*
+	 * This is mostly based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "HDMI_HPD_N",
+			  "STATUS_LED_G",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "PWM0_OUT",
+			  "PWM1_OUT",
+			  "", /* GPIO42 */
+			  "WIFI_CLK",
+			  "SDA0",
+			  "SCL0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+	status = "okay";
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	status = "okay";
+	bus-width = <4>;
+};
+
+/* uart0 communicates with the BT module
+ *
+ * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven
+ * by a single GPIO. We can't give GPIO control to one of the drivers,
+ * otherwise the other part would get unexpectedly disturbed.
+ */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
new file mode 100644
index 000000000000..2f1800cbc522
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-lan7515.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
+	model = "Raspberry Pi 3 Model B+";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+};
+
+&bt {
+	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "BT_ON",
+				  "WL_ON",
+				  "PWR_LED_R",
+				  "LAN_RUN",
+				  "",
+				  "CAM_GPIO0",
+				  "CAM_GPIO1",
+				  "";
+		status = "okay";
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from rpi_SCH_3bplus_1p0_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "HDMI_HPD_N",
+			  "STATUS_LED_G",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "PWM0_OUT",
+			  "PWM1_OUT",
+			  "ETH_CLK",
+			  "WIFI_CLK",
+			  "SDA0",
+			  "SCL0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+	status = "okay";
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	status = "okay";
+	bus-width = <4>;
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b.dts
new file mode 100644
index 000000000000..61270340075c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
+	model = "Raspberry Pi 3 Model B";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+};
+
+&bt {
+	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "BT_ON",
+				  "WL_ON",
+				  "STATUS_LED",
+				  "LAN_RUN",
+				  "HDMI_HPD_N",
+				  "CAM_GPIO0",
+				  "CAM_GPIO1",
+				  "PWR_LOW_N";
+		status = "okay";
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from rpi_SCH_3b_1p2_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "", /* GPIO 28 */
+			  "LAN_RUN_BOOT",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "PWM0_OUT",
+			  "PWM1_OUT",
+			  "ETH_CLK",
+			  "WIFI_CLK",
+			  "SDA0",
+			  "SCL0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+	status = "okay";
+};
+
+&hdmi {
+	hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>;
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	status = "okay";
+	bus-width = <4>;
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts
new file mode 100644
index 000000000000..85f54fa595aa
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837-rpi-cm3.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-compute-module", "brcm,bcm2837";
+	model = "Raspberry Pi Compute Module 3 IO board V3.0";
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "GPIO0",
+			  "GPIO1",
+			  "GPIO2",
+			  "GPIO3",
+			  "GPIO4",
+			  "GPIO5",
+			  "GPIO6",
+			  "GPIO7",
+			  "GPIO8",
+			  "GPIO9",
+			  "GPIO10",
+			  "GPIO11",
+			  "GPIO12",
+			  "GPIO13",
+			  "GPIO14",
+			  "GPIO15",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "GPIO32",
+			  "GPIO33",
+			  "GPIO34",
+			  "GPIO35",
+			  "GPIO36",
+			  "GPIO37",
+			  "GPIO38",
+			  "GPIO39",
+			  "GPIO40",
+			  "GPIO41",
+			  "GPIO42",
+			  "GPIO43",
+			  "GPIO44",
+			  "GPIO45",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by eMMC */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&expgpio 0 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3.dtsi
new file mode 100644
index 000000000000..1e4e4946b6b6
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+
+/ {
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	reg_3v3: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_1v8: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "HDMI_HPD_N",
+				  "EMMC_EN_N",
+				  "",
+				  "",
+				  "",
+				  "",
+				  "",
+				  "";
+		status = "okay";
+	};
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_1v8>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
new file mode 100644
index 000000000000..85cf594724ef
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022 Stefan Wahren <stefan.wahren@i2se.com>
+ */
+
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-otg.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero-2-w", "brcm,bcm2837";
+	model = "Raspberry Pi Zero 2 W";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&bt {
+	shutdown-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "HDMI_HPD_N",
+			  "STATUS_LED_N",
+			  "NC", /* GPIO30 */
+			  "NC", /* GPIO31 */
+			  "NC", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "CAM_GPIO0", /* GPIO40 */
+			  "WL_ON", /* GPIO41 */
+			  "BT_ON", /* GPIO42 */
+			  "WIFI_CLK", /* GPIO43 */
+			  "SDA0", /* GPIO44 */
+			  "SCL0", /* GPIO45 */
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+};
+
+&sdhci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2837.dtsi b/arch/arm/boot/dts/broadcom/bcm2837.dtsi
new file mode 100644
index 000000000000..c281697142b1
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2837.dtsi
@@ -0,0 +1,144 @@
+#include "bcm283x.dtsi"
+#include "bcm2835-common.dtsi"
+
+/ {
+	compatible = "brcm,bcm2837";
+
+	soc {
+		ranges = <0x7e000000 0x3f000000 0x1000000>,
+			 <0x40000000 0x40000000 0x00001000>;
+		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
+
+		local_intc: interrupt-controller@40000000 {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&local_intc>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupt-parent = <&local_intc>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&local_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI
+			     <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI
+			     <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI
+			     <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI
+		always-on;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system
+		 * /about-the-l1-memory-system?lang=en
+		 *
+		 * Source for d/i-cache-size
+		 * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks
+		 */
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for cache-line-size + cache-sets
+		 * https://developer.arm.com/documentation/ddi0500
+		 * /e/level-2-memory-system/about-the-l2-memory-system?lang=en
+		 * Source for cache-size
+		 * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
+			cache-level = <2>;
+		};
+	};
+};
+
+/* Make the BCM2835-style global interrupt controller be a child of the
+ * CPU-local interrupt controller.
+ */
+&intc {
+	compatible = "brcm,bcm2836-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-parent = <&local_intc>;
+	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&cpu_thermal {
+	coefficients = <(-538)	412000>;
+};
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2837-thermal";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi
new file mode 100644
index 000000000000..70bece63f9a7
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/net/microchip-lan78xx.h>
+
+/ {
+	aliases {
+		ethernet0 = &ethernet;
+	};
+};
+
+&usb {
+	usb-port@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb-port@1 {
+			compatible = "usb424,2514";
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet: ethernet@1 {
+				compatible = "usb424,7800";
+				reg = <1>;
+
+				mdio {
+					#address-cells = <0x1>;
+					#size-cells = <0x0>;
+					eth_phy: ethernet-phy@1 {
+						reg = <1>;
+						microchip,led-modes = <
+							LAN78XX_LINK_1000_ACTIVITY
+							LAN78XX_LINK_10_100_ACTIVITY
+						>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm283x-rpi-led-deprecated.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-led-deprecated.dtsi
new file mode 100644
index 000000000000..f83e56de1a72
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-led-deprecated.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	/*
+	 * This file provides the now deprecated ACT LED to the
+	 * Raspberry Pi boards. Please don't include this file
+	 * for new boards!
+	 */
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led_act: led-act {
+			label = "ACT";
+			default-state = "keep";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-smsc9512.dtsi
index 9a0599f711ff..882b13807075 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-smsc9512.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 / {
 	aliases {
 		ethernet0 = &ethernet;
@@ -11,7 +12,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@1 {
+		ethernet: ethernet@1 {
 			compatible = "usb424,ec00";
 			reg = <1>;
 		};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi
index dc7ae776db5f..4273b90b53cc 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi
@@ -11,7 +11,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@1 {
+		ethernet: ethernet@1 {
 			compatible = "usb424,ec00";
 			reg = <1>;
 		};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
index 73f4ece8dcd0..73f4ece8dcd0 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-otg.dtsi
index e7d217c967a1..e2fd9610e125 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-otg.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 &usb {
 	dr_mode = "otg";
 	g-rx-fifo-size = <256>;
diff --git a/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-peripheral.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-peripheral.dtsi
new file mode 100644
index 000000000000..0ff0e9e25327
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-peripheral.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+&usb {
+	dr_mode = "peripheral";
+	g-rx-fifo-size = <256>;
+	g-np-tx-fifo-size = <32>;
+	g-tx-fifo-size = <256 256 512 512 512 768 768>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm283x-rpi-wifi-bt.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-wifi-bt.dtsi
new file mode 100644
index 000000000000..0b64cc19941f
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-wifi-bt.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+	};
+};
+
+/* SDHCI is used to control the SDIO for wireless */
+&sdhci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	status = "okay";
+
+	bt: bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <2000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm283x.dtsi b/arch/arm/boot/dts/broadcom/bcm283x.dtsi
new file mode 100644
index 000000000000..69b0919f1324
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm283x.dtsi
@@ -0,0 +1,525 @@
+#include <dt-bindings/pinctrl/bcm2835.h>
+#include <dt-bindings/clock/bcm2835.h>
+#include <dt-bindings/clock/bcm2835-aux.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/soc/bcm2835-pm.h>
+
+/* firmware-provided startup stubs live here, where the secondary CPUs are
+ * spinning.
+ */
+/memreserve/ 0x00000000 0x00001000;
+
+/* This include file covers the common peripherals and configuration between
+ * bcm2835 and bcm2836 implementations, leaving the CPU configuration to
+ * bcm2835.dtsi and bcm2836.dtsi.
+ */
+
+/ {
+	compatible = "brcm,bcm2835";
+	model = "BCM2835";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	rmem: reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		cma: linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x4000000>; /* 64MB */
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+
+			trips {
+				cpu-crit {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		system_timer: timer@7e003000 {
+			compatible = "brcm,bcm2835-system-timer";
+			reg = <0x7e003000 0x1000>;
+			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+			/* This could be a reference to BCM2835_CLOCK_TIMER,
+			 * but we don't have the driver using the common clock
+			 * support yet.
+			 */
+			clock-frequency = <1000000>;
+		};
+
+		txp: txp@7e004000 {
+			compatible = "brcm,bcm2835-txp";
+			reg = <0x7e004000 0x20>;
+			interrupts = <1 11>;
+		};
+
+		clocks: cprman@7e101000 {
+			compatible = "brcm,bcm2835-cprman";
+			#clock-cells = <1>;
+			reg = <0x7e101000 0x2000>;
+
+			/* CPRMAN derives almost everything from the
+			 * platform's oscillator.  However, the DSI
+			 * pixel clocks come from the DSI analog PHY.
+			 */
+			clocks = <&clk_osc>,
+				<&dsi0 0>, <&dsi0 1>, <&dsi0 2>,
+				<&dsi1 0>, <&dsi1 1>, <&dsi1 2>;
+		};
+
+		mailbox: mailbox@7e00b880 {
+			compatible = "brcm,bcm2835-mbox";
+			reg = <0x7e00b880 0x40>;
+			interrupts = <0 1>;
+			#mbox-cells = <0>;
+		};
+
+		gpio: gpio@7e200000 {
+			compatible = "brcm,bcm2835-gpio";
+			reg = <0x7e200000 0xb4>;
+			/*
+			 * The GPIO IP block is designed for 3 banks of GPIOs.
+			 * Each bank has a GPIO interrupt for itself.
+			 * There is an overall "any bank" interrupt.
+			 * In order, these are GIC interrupts 17, 18, 19, 20.
+			 * Since the BCM2835 only has 2 banks, the 2nd bank
+			 * interrupt output appears to be mirrored onto the
+			 * 3rd bank's interrupt signal.
+			 * So, a bank0 interrupt shows up on 17, 20, and
+			 * a bank1 interrupt shows up on 18, 19, 20!
+			 */
+			interrupts = <2 17>, <2 18>, <2 19>, <2 20>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			gpio-ranges = <&gpio 0 0 54>;
+
+			/* Defines common pin muxing groups
+			 *
+			 * While each pin can have its mux selected
+			 * for various functions individually, some
+			 * groups only make sense to switch to a
+			 * particular function together.
+			 */
+			dpi_gpio0: dpi-gpio0 {
+				brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
+					     12 13 14 15 16 17 18 19
+					     20 21 22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+			emmc_gpio22: emmc-gpio22 {
+				brcm,pins = <22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+			emmc_gpio34: emmc-gpio34 {
+				brcm,pins = <34 35 36 37 38 39>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+				brcm,pull = <BCM2835_PUD_OFF
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP>;
+			};
+			emmc_gpio48: emmc-gpio48 {
+				brcm,pins = <48 49 50 51 52 53>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+
+			gpclk0_gpio4: gpclk0-gpio4 {
+				brcm,pins = <4>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio5: gpclk1-gpio5 {
+				brcm,pins = <5>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio42: gpclk1-gpio42 {
+				brcm,pins = <42>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio44: gpclk1-gpio44 {
+				brcm,pins = <44>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk2_gpio6: gpclk2-gpio6 {
+				brcm,pins = <6>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk2_gpio43: gpclk2-gpio43 {
+				brcm,pins = <43>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+				brcm,pull = <BCM2835_PUD_OFF>;
+			};
+
+			i2c0_gpio0: i2c0-gpio0 {
+				brcm,pins = <0 1>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c0_gpio28: i2c0-gpio28 {
+				brcm,pins = <28 29>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c0_gpio44: i2c0-gpio44 {
+				brcm,pins = <44 45>;
+				brcm,function = <BCM2835_FSEL_ALT1>;
+			};
+			i2c1_gpio2: i2c1-gpio2 {
+				brcm,pins = <2 3>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c1_gpio44: i2c1-gpio44 {
+				brcm,pins = <44 45>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+
+			jtag_gpio22: jtag-gpio22 {
+				brcm,pins = <22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+
+			pcm_gpio18: pcm-gpio18 {
+				brcm,pins = <18 19 20 21>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pcm_gpio28: pcm-gpio28 {
+				brcm,pins = <28 29 30 31>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+
+			sdhost_gpio48: sdhost-gpio48 {
+				brcm,pins = <48 49 50 51 52 53>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+
+			spi0_gpio7: spi0-gpio7 {
+				brcm,pins = <7 8 9 10 11>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			spi0_gpio35: spi0-gpio35 {
+				brcm,pins = <35 36 37 38 39>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			spi1_gpio16: spi1-gpio16 {
+				brcm,pins = <16 17 18 19 20 21>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+			spi2_gpio40: spi2-gpio40 {
+				brcm,pins = <40 41 42 43 44 45>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+
+			uart0_gpio14: uart0-gpio14 {
+				brcm,pins = <14 15>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			/* Separate from the uart0_gpio14 group
+			 * because it conflicts with spi1_gpio16, and
+			 * people often run uart0 on the two pins
+			 * without flow control.
+			 */
+			uart0_ctsrts_gpio16: uart0-ctsrts-gpio16 {
+				brcm,pins = <16 17>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+			uart0_ctsrts_gpio30: uart0-ctsrts-gpio30 {
+				brcm,pins = <30 31>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+				brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
+			};
+			uart0_gpio32: uart0-gpio32 {
+				brcm,pins = <32 33>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+				brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
+			};
+			uart0_gpio36: uart0-gpio36 {
+				brcm,pins = <36 37>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+			uart0_ctsrts_gpio38: uart0-ctsrts-gpio38 {
+				brcm,pins = <38 39>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+
+			uart1_gpio14: uart1-gpio14 {
+				brcm,pins = <14 15>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio16: uart1-ctsrts-gpio16 {
+				brcm,pins = <16 17>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_gpio32: uart1-gpio32 {
+				brcm,pins = <32 33>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio30: uart1-ctsrts-gpio30 {
+				brcm,pins = <30 31>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_gpio40: uart1-gpio40 {
+				brcm,pins = <40 41>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio42: uart1-ctsrts-gpio42 {
+				brcm,pins = <42 43>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+		};
+
+		uart0: serial@7e201000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201000 0x200>;
+			interrupts = <2 25>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+		};
+
+		sdhost: mmc@7e202000 {
+			compatible = "brcm,bcm2835-sdhost";
+			reg = <0x7e202000 0x100>;
+			interrupts = <2 24>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			status = "disabled";
+		};
+
+		i2s: i2s@7e203000 {
+			compatible = "brcm,bcm2835-i2s";
+			reg = <0x7e203000 0x24>;
+			clocks = <&clocks BCM2835_CLOCK_PCM>;
+			status = "disabled";
+		};
+
+		spi: spi@7e204000 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204000 0x200>;
+			interrupts = <2 22>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@7e205000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e205000 0x200>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		dpi: dpi@7e208000 {
+			compatible = "brcm,bcm2835-dpi";
+			reg = <0x7e208000 0x8c>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>,
+				 <&clocks BCM2835_CLOCK_DPI>;
+			clock-names = "core", "pixel";
+			status = "disabled";
+		};
+
+		dsi0: dsi@7e209000 {
+			compatible = "brcm,bcm2835-dsi0";
+			reg = <0x7e209000 0x78>;
+			interrupts = <2 4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+
+			clocks = <&clocks BCM2835_PLLA_DSI0>,
+				 <&clocks BCM2835_CLOCK_DSI0E>,
+				 <&clocks BCM2835_CLOCK_DSI0P>;
+			clock-names = "phy", "escape", "pixel";
+
+			clock-output-names = "dsi0_byte",
+					     "dsi0_ddr2",
+					     "dsi0_ddr";
+
+			status = "disabled";
+		};
+
+		aux: aux@7e215000 {
+			compatible = "brcm,bcm2835-aux";
+			#clock-cells = <1>;
+			reg = <0x7e215000 0x8>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+		};
+
+		uart1: serial@7e215040 {
+			compatible = "brcm,bcm2835-aux-uart";
+			reg = <0x7e215040 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_UART>;
+			status = "disabled";
+		};
+
+		spi1: spi@7e215080 {
+			compatible = "brcm,bcm2835-aux-spi";
+			reg = <0x7e215080 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_SPI1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@7e2150c0 {
+			compatible = "brcm,bcm2835-aux-spi";
+			reg = <0x7e2150c0 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_SPI2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm: pwm@7e20c000 {
+			compatible = "brcm,bcm2835-pwm";
+			reg = <0x7e20c000 0x28>;
+			clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clock-rates = <10000000>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		sdhci: mmc@7e300000 {
+			compatible = "brcm,bcm2835-sdhci";
+			reg = <0x7e300000 0x100>;
+			interrupts = <2 30>;
+			clocks = <&clocks BCM2835_CLOCK_EMMC>;
+			status = "disabled";
+		};
+
+		hvs@7e400000 {
+			compatible = "brcm,bcm2835-hvs";
+			reg = <0x7e400000 0x6000>;
+			interrupts = <2 1>;
+		};
+
+		dsi1: dsi@7e700000 {
+			compatible = "brcm,bcm2835-dsi1";
+			reg = <0x7e700000 0x8c>;
+			interrupts = <2 12>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+
+			clocks = <&clocks BCM2835_PLLD_DSI1>,
+				 <&clocks BCM2835_CLOCK_DSI1E>,
+				 <&clocks BCM2835_CLOCK_DSI1P>;
+			clock-names = "phy", "escape", "pixel";
+
+			clock-output-names = "dsi1_byte",
+					     "dsi1_ddr2",
+					     "dsi1_ddr";
+
+			status = "disabled";
+		};
+
+		csi0: csi@7e800000 {
+			compatible = "brcm,bcm2835-unicam";
+			reg = <0x7e800000 0x800>,
+			      <0x7e802000 0x4>;
+			reg-names = "unicam", "cmi";
+			interrupts = <2 6>;
+			brcm,num-data-lanes = <2>;
+			status = "disabled";
+			port {
+			};
+		};
+
+		csi1: csi@7e801000 {
+			compatible = "brcm,bcm2835-unicam";
+			reg = <0x7e801000 0x800>,
+			      <0x7e802004 0x4>;
+			reg-names = "unicam", "cmi";
+			interrupts = <2 7>;
+			brcm,num-data-lanes = <4>;
+			status = "disabled";
+			port {
+			};
+		};
+
+		i2c1: i2c@7e804000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e804000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb: usb@7e980000 {
+			compatible = "brcm,bcm2835-usb";
+			reg = <0x7e980000 0x10000>;
+			interrupts = <1 9>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clk_usb>;
+			clock-names = "otg";
+			phys = <&usbphy>;
+			phy-names = "usb2-phy";
+		};
+	};
+
+	clocks {
+		/* The oscillator is the root of the clock tree. */
+		clk_osc: clk-osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "osc";
+			clock-frequency = <19200000>;
+		};
+
+		clk_usb: clk-usb {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "otg";
+			clock-frequency = <480000000>;
+		};
+	};
+
+	usbphy: phy {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac56u.dts
new file mode 100644
index 000000000000..c80ac16ad949
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac56u.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-AC56U
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "asus,rt-ac56u", "brcm,bcm4708";
+	model = "Asus RT-AC56U (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-usb3 {
+			label = "bcm53xx:blue:usb3";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan {
+			label = "bcm53xx:blue:wan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-lan {
+			label = "bcm53xx:blue:lan";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power {
+			label = "bcm53xx:blue:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-all {
+			label = "bcm53xx:blue:all";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb2 {
+			label = "bcm53xx:blue:usb2";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac68u.dts
new file mode 100644
index 000000000000..3fe17bd7b86d
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac68u.dts
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-AC68U
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "asus,rt-ac68u", "brcm,bcm4708";
+	model = "Asus RT-AC68U (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-usb2 {
+			label = "bcm53xx:blue:usb2";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power {
+			label = "bcm53xx:blue:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-logo {
+			label = "bcm53xx:white:logo";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-usb3 {
+			label = "bcm53xx:blue:usb3";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-brightness {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts
new file mode 100644
index 000000000000..f5c95c9a712e
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Taishi Shimizu <s.taishi14142@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "buffalo,wxr-1750dhp", "brcm,bcm4708";
+	model = "Buffalo WXR-1750DHP";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-aoss {
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			label = "AOSS";
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		/* GPIO 3 is a switch button with AUTO / MANUAL. */
+		button-manual {
+			gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
+			label = "MANUAL";
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+		};
+
+		button-restart {
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+		};
+
+		/* GPIO 8 and 9 are a tri-state switch button with
+		 * ROUTER / AP / WB.
+		 */
+		button-router {
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			label = "ROUTER";
+			linux,code = <BTN_1>;
+			linux,input-type = <EV_SW>;
+		};
+
+		button-wb {
+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+			label = "WB";
+			linux,code = <BTN_2>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-internet {
+			color = <LED_COLOR_ID_WHITE>;
+			function = "internet";
+			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power0 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power1 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-router0 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = "router";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-router1 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = "router";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-usb {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_USB;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&xhci_port1 &ehci_port1 &ohci_port1>;
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+		};
+
+		port@1 {
+			label = "lan4";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan2";
+		};
+
+		port@4 {
+			label = "lan1";
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi
new file mode 100644
index 000000000000..9f9084269ef5
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-1166DHP and WZR-1166DHP2
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+ */
+
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		sck-gpios = <&chipcommon 7 0>;
+		mosi-gpios = <&chipcommon 4 0>;
+		cs-gpios = <&chipcommon 6 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hc595: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-usb {
+			/* label = "bcm53xx:blue:usb"; */
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>, <&ohci_port2>,
+					  <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-power0 {
+			/* label = "bcm53xx:red:power"; */
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power1 {
+			/* label = "bcm53xx:white:power"; */
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-router0 {
+			/*  label = "bcm53xx:blue:router"; */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-router1 {
+			/* label = "bcm53xx:amber:router"; */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan {
+			/* label = "bcm53xx:blue:wan"; */
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wireless0 {
+			/* label = "bcm53xx:blue:wireless"; */
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wireless1 {
+			/* label = "bcm53xx:amber:wireless"; */
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-aoss {
+			label = "AOSS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Commit mode set by switch? */
+		button-mode {
+			label = "Mode";
+			linux,code = <KEY_SETUP>;
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch: AP mode */
+		button-sw-ap {
+			label = "AP";
+			linux,code = <BTN_0>;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+
+		button-eject {
+			label = "USB eject";
+			linux,code = <KEY_EJECTCD>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+		};
+
+		port@1 {
+			label = "lan2";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan4";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp.dts
new file mode 100644
index 000000000000..8e506269fa1a
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindigs for Buffalo WZR-1166DHP
+ *
+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-1166dhp", "brcm,bcm4708";
+	model = "Buffalo WZR-1166DHP";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp2.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp2.dts
new file mode 100644
index 000000000000..596129027074
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp2.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindigs for Buffalo WZR-1166DHP2
+ *
+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-1166dhp2", "brcm,bcm4708";
+	model = "Buffalo WZR-1166DHP2";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1750dhp.dts
index 62e1427b3f10..95ef6ca7210b 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1750dhp.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for Buffalo WZR-1750DHP
  *
  * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 /dts-v1/;
@@ -20,16 +19,17 @@
 		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
-	memory {
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	spi {
 		compatible = "spi-gpio";
 		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 7 0>;
-		gpio-mosi = <&chipcommon 4 0>;
+		sck-gpios = <&chipcommon 7 0>;
+		mosi-gpios = <&chipcommon 4 0>;
 		cs-gpios = <&chipcommon 6 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -49,45 +49,49 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>, <&ohci_port2>,
+					  <&ehci_port2>;
+			linux,default-trigger = "usbport";
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:red:power";
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:white:power";
 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router0 {
+		led-router0 {
 			label = "bcm53xx:blue:router";
 			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router1 {
+		led-router1 {
 			label = "bcm53xx:amber:router";
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:blue:wan";
 			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wireless0 {
+		led-wireless0 {
 			label = "bcm53xx:blue:wireless";
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless1 {
+		led-wireless1 {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
 		};
@@ -95,36 +99,34 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		aoss {
+		button-aoss {
 			label = "AOSS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Commit mode set by switch? */
-		mode {
+		button-mode {
 			label = "Mode";
 			linux,code = <KEY_SETUP>;
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Switch: AP mode */
-		sw_ap {
+		button-sw-ap {
 			label = "AP";
 			linux,code = <BTN_0>;
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
 
-		eject {
+		button-eject {
 			label = "USB eject";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
@@ -143,3 +145,7 @@
 &spi_nor {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6300-v1.dts
new file mode 100644
index 000000000000..0ed25bf71f0d
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6300-v1.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "linksys,ea6300-v1", "brcm,bcm4708";
+	model = "Linksys EA6300 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x180000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts
new file mode 100644
index 000000000000..0454423fe166
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ * Copyright (C) 2018 Rene Kjellerup <rk.katana.steel@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "linksys,ea6500-v2", "brcm,bcm4708";
+	model = "Linksys EA6500 V2";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts
new file mode 100644
index 000000000000..72e960c888ac
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	compatible = "luxul,xap-1510-v1", "brcm,bcm4708";
+	model = "Luxul XAP-1510 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "poe";
+		};
+
+		port@4 {
+			label = "lan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts
new file mode 100644
index 000000000000..750e17482371
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Luxul XWC-1000
+ *
+ * Copyright 2014 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,xwc-1000", "brcm,bcm4708";
+	model = "Luxul XWC-1000 (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
+	nand_controller: nand-controller@18028000 {
+		nand@0 {
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "ubi";
+					reg = <0x00000000 0x08000000>;
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@4 {
+			label = "lan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts
new file mode 100644
index 000000000000..2bdbc7d18b0e
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts
@@ -0,0 +1,134 @@
+/*
+ * Broadcom BCM470X / BCM5301X arm platform code.
+ * DTS for Netgear R6250 V1
+ *
+ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "netgear,r6250-v1", "brcm,bcm4708";
+	model = "Netgear R6250 V1 (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-logo {
+			label = "bcm53xx:white:logo";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-power0 {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-power1 {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb {
+			label = "bcm53xx:blue:usb";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-wireless {
+			label = "bcm53xx:blue:wireless";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts
new file mode 100644
index 000000000000..77396730bdd3
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Netgear R6300 V2
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "netgear,r6300-v2", "brcm,bcm4708";
+	model = "Netgear R6300 V2 (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-logo {
+			label = "bcm53xx:white:logo";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-power0 {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power1 {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-usb {
+			label = "bcm53xx:blue:usb";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wireless {
+			label = "bcm53xx:blue:wireless";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts
new file mode 100644
index 000000000000..b226bef3369c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X arm platform code.
+ * DTS for SmartRG SR400ac
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "smartrg,sr400ac", "brcm,bcm4708";
+	model = "SmartRG SR400ac";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-usb2 {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb3-white {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb3-green {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-wps {
+			label = "bcm53xx:white:wps";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-status-red {
+			label = "bcm53xx:red:status";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-status-green {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-status-blue {
+			label = "bcm53xx:blue:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan-red {
+			label = "bcm53xx:red:wan";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/broadcom/bcm4708.dtsi
index 1a19e97a987d..1a19e97a987d 100644
--- a/arch/arm/boot/dts/bcm4708.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm4708.dtsi
diff --git a/arch/arm/boot/dts/broadcom/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/broadcom/bcm47081-asus-rt-n18u.dts
new file mode 100644
index 000000000000..3854db0118a9
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47081-asus-rt-n18u.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-N18U
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "asus,rt-n18u", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Asus RT-N18U (BCM47081)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "bcm53xx:blue:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-usb2 {
+			label = "bcm53xx:blue:usb2";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan {
+			label = "bcm53xx:blue:wan";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-lan {
+			label = "bcm53xx:blue:lan";
+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-usb3 {
+			label = "bcm53xx:blue:usb3";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts
new file mode 100644
index 000000000000..192b8db5a89c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-600DHP2
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-600dhp2", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Buffalo WZR-600DHP2 (BCM47081)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		sck-gpios = <&chipcommon 7 0>;
+		mosi-gpios = <&chipcommon 4 0>;
+		cs-gpios = <&chipcommon 6 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hc595: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power0 {
+			label = "bcm53xx:green:power";
+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-power1 {
+			label = "bcm53xx:red:power";
+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-router0 {
+			label = "bcm53xx:green:router";
+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-router1 {
+			label = "bcm53xx:amber:router";
+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan {
+			label = "bcm53xx:green:wan";
+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wireless0 {
+			label = "bcm53xx:green:wireless";
+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wireless1 {
+			label = "bcm53xx:amber:wireless";
+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-aoss {
+			label = "AOSS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch device mode? */
+		button-mode {
+			label = "Mode";
+			linux,code = <KEY_SETUP>;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+
+		button-eject {
+			label = "USB eject";
+			linux,code = <KEY_EJECTCD>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+		};
+
+		port@1 {
+			label = "lan2";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan4";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-900dhp.dts
new file mode 100644
index 000000000000..7655e4ff2d1c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-900dhp.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-900DHP
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-900dhp", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Buffalo WZR-900DHP (BCM47081)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		sck-gpios = <&chipcommon 7 0>;
+		mosi-gpios = <&chipcommon 4 0>;
+		cs-gpios = <&chipcommon 6 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hc595: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-usb {
+			label = "bcm53xx:green:usb";
+			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power0 {
+			label = "bcm53xx:green:power";
+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-power1 {
+			label = "bcm53xx:red:power";
+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-router0 {
+			label = "bcm53xx:green:router";
+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-router1 {
+			label = "bcm53xx:amber:router";
+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan {
+			label = "bcm53xx:green:wan";
+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wireless0 {
+			label = "bcm53xx:green:wireless";
+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wireless1 {
+			label = "bcm53xx:amber:wireless";
+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts
new file mode 100644
index 000000000000..0198b5f9e4a7
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+	compatible = "luxul,xap-1410-v1", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Luxul XAP-1410 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@4 {
+			label = "poe";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
new file mode 100644
index 000000000000..73ff1694a4a0
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+	compatible = "luxul,xwr-1200-v1", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Luxul XWR-1200 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-lan3 {
+			label = "bcm53xx:green:lan3";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-lan4 {
+			label = "bcm53xx:green:lan4";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-wan {
+			label = "bcm53xx:green:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-lan2 {
+			label = "bcm53xx:green:lan2";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-usb {
+			label = "bcm53xx:green:usb";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-lan1 {
+			label = "bcm53xx:green:lan1";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+			nvmem-cells = <&et0macaddr 5>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/broadcom/bcm47081-tplink-archer-c5-v2.dts
new file mode 100644
index 000000000000..b6a5886698b2
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47081-tplink-archer-c5-v2.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+	compatible = "tplink,archer-c5-v2", "brcm,bcm47081", "brcm,bcm4708";
+	model = "TP-LINK Archer C5 V2";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-lan {
+			label = "bcm53xx:green:lan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-usb2-port1 {
+			label = "bcm53xx:green:usb2-port1";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-power {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-green {
+			label = "bcm53xx:green:wan";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			label = "bcm53xx:green:wps";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-usb2-port2 {
+			label = "bcm53xx:green:usb2-port2";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+
+	partitions {
+		compatible = "tplink,safeloader-partitions";
+		partitions-table-offset = <0xe50000>;
+
+		partition-os-image {
+			compatible = "brcm,trx";
+		};
+
+		partition-file-system {
+			linux,rootfs;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47081.dtsi b/arch/arm/boot/dts/broadcom/bcm47081.dtsi
new file mode 100644
index 000000000000..ed13af028528
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47081.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for BCM47081 SoC.
+ *
+ * Copyright © 2014 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+#include "bcm5301x.dtsi"
+
+/ {
+	compatible = "brcm,bcm47081";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
new file mode 100644
index 000000000000..3da2daee0c84
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Tom Brautaset <tbrautaset@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "asus,rt-ac3200", "brcm,bcm4709", "brcm,bcm4708";
+	model = "ASUS RT-AC3200";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x00180000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wifi {
+			label = "Wi-Fi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_WPS;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et0macaddr 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+	nvmem-cells = <&et0macaddr 2>;
+	nvmem-cell-names = "mac-address";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			reg = <0x00000000 0x00080000>;
+			label = "boot";
+			read-only;
+		};
+
+		partition@80000 {
+			reg = <0x00080000 0x00180000>;
+			label = "nvram";
+		};
+
+		partition@200000 {
+			compatible = "brcm,trx";
+			reg = <0x00200000 0x07e00000>;
+			label = "firmware";
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+		};
+
+		port@1 {
+			label = "lan4";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan2";
+		};
+
+		port@4 {
+			label = "lan1";
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts
new file mode 100644
index 000000000000..59400217f8c3
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-AC87U
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "asus,rt-ac87u", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Asus RT-AC87U";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1c080000 {
+		et1macaddr: et1macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-wps {
+			label = "bcm53xx:blue:wps";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power {
+			label = "bcm53xx:blue:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan {
+			label = "bcm53xx:red:wan";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et1macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		boot@0 {
+			label = "boot";
+			reg = <0x00000000 0x00080000>;
+			read-only;
+		};
+
+		nvram@80000 {
+			label = "nvram";
+			reg = <0x00080000 0x00180000>;
+		};
+
+		firmware@200000 {
+			label = "firmware";
+			reg = <0x00200000 0x07cc0000>;
+			compatible = "brcm,trx";
+		};
+
+		asus@7ec0000 {
+			label = "asus";
+			reg = <0x07ec0000 0x00140000>;
+			read-only;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/broadcom/bcm4709-buffalo-wxr-1900dhp.dts
index 92058c73ee59..b7cd2faa30ce 100644
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-buffalo-wxr-1900dhp.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for Buffalo WXR-1900DHP
  *
  * Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 /dts-v1/;
@@ -20,56 +19,57 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:green:usb";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router-amber {
+		led-router-amber {
 			label = "bcm53xx:amber:router";
 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
 		};
 
-		router-white {
+		led-router-white {
 			label = "bcm53xx:white:router";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-white {
+		led-wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless-amber {
+		led-wireless-amber {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless-white {
+		led-wireless-white {
 			label = "bcm53xx:white:wireless";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
@@ -77,42 +77,40 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		power {
+		button-power {
 			label = "Power";
 			linux,code = <KEY_POWER>;
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 		};
 
-		aoss {
+		button-aoss {
 			label = "AOSS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Commit mode set by switch? */
-		mode {
+		button-mode {
 			label = "Mode";
 			linux,code = <KEY_SETUP>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Switch: AP mode */
-		sw_ap {
+		button-sw-ap {
 			label = "AP";
 			linux,code = <BTN_0>;
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
 
-		eject {
+		button-eject {
 			label = "USB eject";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
@@ -128,3 +126,7 @@
 &spi_nor {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
new file mode 100644
index 000000000000..2ba5adf2b7e7
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "linksys,ea9200", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Linksys EA9200";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x180000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+		};
+
+		port@1 {
+			label = "lan2";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan4";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			status = "disabled";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7000.dts
new file mode 100644
index 000000000000..24ba8f8f9bf3
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7000.dts
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Netgear R7000
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "netgear,r7000", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Netgear R7000";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:white:5ghz";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wps {
+			label = "bcm53xx:white:wps";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wireless {
+			label = "bcm53xx:white:wireless";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-usb3 {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb2 {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
new file mode 100644
index 000000000000..127ca8741220
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
@@ -0,0 +1,252 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Netgear R8000
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "netgear,r8000", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Netgear R8000 (BCM4709)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5ghz-1 {
+			label = "bcm53xx:white:5ghz-1";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wireless {
+			label = "bcm53xx:white:wireless";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			label = "bcm53xx:white:wps";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5ghz-2 {
+			label = "bcm53xx:white:5ghz-2";
+			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb3 {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb2 {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+
+		button-brightness {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pcie0 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,1,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+			reg = <0x0000 0 0 0 0>;
+			ieee80211-freq-limit = <5735000 5835000>;
+			brcm,ccode-map = "JP-JP-78", "US-Q2-86";
+		};
+	};
+};
+
+&pcie1 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@1,0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		bridge@1,1,0 {
+			reg = <0x0000 0 0 0 0>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bridge@1,0 {
+				reg = <0x800 0 0 0 0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				wifi@0,0 {
+					compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+					reg = <0x0000 0 0 0 0>;
+					brcm,ccode-map = "JP-JP-78", "US-Q2-86";
+				};
+			};
+
+			bridge@1,2,2 {
+				reg = <0x1000 0 0 0 0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				wifi@1,4,0 {
+					compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+					reg = <0x0000 0 0 0 0>;
+					ieee80211-freq-limit = <5170000 5730000>;
+					brcm,ccode-map = "JP-JP-78", "US-Q2-86";
+				};
+			};
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+		};
+
+		port@1 {
+			label = "lan2";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan4";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@7 {
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@8 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/broadcom/bcm4709-tplink-archer-c9-v1.dts
new file mode 100644
index 000000000000..5a8b2b1567e6
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4709-tplink-archer-c9-v1.dts
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+
+/ {
+	compatible = "tplink,archer-c9-v1", "brcm,bcm4709", "brcm,bcm4708";
+	model = "TP-LINK Archer C9 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-lan {
+			label = "bcm53xx:blue:lan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			label = "bcm53xx:blue:wps";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-usb3 {
+			label = "bcm53xx:blue:usb3";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb2 {
+			label = "bcm53xx:blue:usb2";
+			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-wan-blue {
+			label = "bcm53xx:blue:wan";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power {
+			label = "bcm53xx:blue:power";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+
+	partitions {
+		compatible = "tplink,safeloader-partitions";
+		partitions-table-offset = <0xe50000>;
+
+		partition-os-image {
+			compatible = "brcm,trx";
+		};
+
+		partition-file-system {
+			linux,rootfs;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4709.dtsi b/arch/arm/boot/dts/broadcom/bcm4709.dtsi
new file mode 100644
index 000000000000..cba3d910bed8
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4709.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include "bcm4708.dtsi"
+
+&uart0 {
+	clock-frequency = <125000000>;
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dts
new file mode 100644
index 000000000000..1655ac95769c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Arınç ÜNAL <arinc.unal@arinc9.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094-asus-rt-ac3100.dtsi"
+
+/ {
+	compatible = "asus,rt-ac3100", "brcm,bcm47094", "brcm,bcm4708";
+	model = "ASUS RT-AC3100";
+
+	nvram@1c080000 {
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et0macaddr 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+	nvmem-cells = <&et0macaddr 2>;
+	nvmem-cell-names = "mac-address";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
new file mode 100644
index 000000000000..2cfaaabc7a6a
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Arınç ÜNAL <arinc.unal@arinc9.com>
+ */
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	memory@0 {
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+		device_type = "memory";
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x00180000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-led {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wifi {
+			label = "Wi-Fi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-lan {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-usb2 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb3 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ehci_port1>, <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-wan-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_WPS;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			reg = <0x00000000 0x00080000>;
+			label = "boot";
+			read-only;
+		};
+
+		partition@80000 {
+			reg = <0x00080000 0x00180000>;
+			label = "nvram";
+		};
+
+		partition@200000 {
+			compatible = "brcm,trx";
+			reg = <0x00200000 0x07e00000>;
+			label = "firmware";
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			label = "cpu";
+		};
+
+		port@8 {
+			label = "cpu";
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts
new file mode 100644
index 000000000000..01ec8c03686a
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Tom Brautaset <tbrautaset@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "asus,rt-ac5300", "brcm,bcm47094", "brcm,bcm4708";
+	model = "ASUS RT-AC5300";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+		device_type = "memory";
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x00180000>;
+
+		et1macaddr: et1macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wifi {
+			label = "Wi-Fi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-lan {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_WPS;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et1macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et1macaddr 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+	nvmem-cells = <&et1macaddr 2>;
+	nvmem-cell-names = "mac-address";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			reg = <0x00000000 0x00080000>;
+			label = "boot";
+			read-only;
+		};
+
+		partition@80000 {
+			reg = <0x00080000 0x00180000>;
+			label = "nvram";
+		};
+
+		partition@200000 {
+			compatible = "brcm,trx";
+			reg = <0x00200000 0x07e00000>;
+			label = "firmware";
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+		};
+
+		port@1 {
+			label = "lan1";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan3";
+		};
+
+		port@4 {
+			label = "lan4";
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
new file mode 100644
index 000000000000..a197f447fd97
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Arınç ÜNAL <arinc.unal@arinc9.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094-asus-rt-ac3100.dtsi"
+
+/ {
+	compatible = "asus,rt-ac88u", "brcm,bcm47094", "brcm,bcm4708";
+	model = "ASUS RT-AC88U";
+
+	nvram@1c080000 {
+		et1macaddr: et1macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	switch {
+		compatible = "realtek,rtl8365mb";
+		mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		realtek,disable-leds;
+		dsa,member = <1 0>;
+
+		mdio {
+			compatible = "realtek,smi-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethphy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethphy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan5";
+				phy-handle = <&ethphy0>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan6";
+				phy-handle = <&ethphy1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan7";
+				phy-handle = <&ethphy2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan8";
+				phy-handle = <&ethphy3>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&sw0_p5>;
+				phy-mode = "rgmii";
+				tx-internal-delay-ps = <2000>;
+				rx-internal-delay-ps = <2100>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+	};
+};
+
+&gmac0 {
+	status = "disabled";
+};
+
+&gmac1 {
+	nvmem-cells = <&et1macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+	nvmem-cells = <&et1macaddr 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&srab {
+	dsa,member = <0 0>;
+
+	ports {
+		sw0_p5: port@5 {
+			/delete-property/ethernet;
+
+			label = "extsw";
+			phy-mode = "rgmii";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+				pause;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
new file mode 100644
index 000000000000..c5099defe9f9
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for D-Link DIR-885L
+ *
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch1.dtsi"
+
+/ {
+	compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
+	model = "D-Link DIR-885L";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1e3f0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1e3f0000 0x10000>;
+
+		et2macaddr: et2macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	nand_controller: nand-controller@18028000 {
+		nand@0 {
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					compatible = "seama";
+					label = "firmware";
+					reg = <0x00000000 0x08000000>;
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb3-white {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:white:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch: router / extender */
+		button-extender {
+			label = "Extender";
+			linux,code = <BTN_0>;
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&gmac0 {
+	nvmem-cells = <&et2macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+			nvmem-cells = <&et2macaddr 3>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@5 {
+			status = "disabled";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts
new file mode 100644
index 000000000000..3124dfd01b94
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device tree for D-Link DIR-890L
+ * D-Link calls this board "WRGAC36"
+ * this router has the same looks and form factor as D-Link DIR-885L.
+ *
+ * Some differences from DIR-885L include a separate USB2 port, separate LEDs
+ * for USB2 and USB3, a separate VCC supply for the USB2 slot and no
+ * router/extender switch is mounted (there is an empty mount point on the
+ * PCB) so this device is a pure router. Also the LAN ports are in the right
+ * order.
+ *
+ * Based on the device tree for DIR-885L
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
+ * Copyright (C) 2022 Linus Walleij
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch1.dtsi"
+
+/ {
+	compatible = "dlink,dir-890l", "brcm,bcm47094", "brcm,bcm4708";
+	model = "D-Link DIR-890L";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		/*
+		 * LED information is derived from the boot log which
+		 * conveniently lists all the LEDs.
+		 */
+		compatible = "gpio-leds";
+
+		led-power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb3-white {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb2-white {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:white:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Called "factory reset" in the vendor dmesg */
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/*
+	 * The flash memory is memory mapped at 0x1e000000-0x1fffffff
+	 * 64KB blocks; total size 2MB, same that can be
+	 * found attached to the spi_nor SPI controller.
+	 */
+	nvram@1e1f0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1e1f0000 0x00010000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+};
+
+&gmac2 {
+	/*
+	 * The NVRAM curiously does not contain a MAC address
+	 * for et2 so since that is the only ethernet interface
+	 * actually in use on the platform, we use this et0 MAC
+	 * address for et2.
+	 */
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&nandcs {
+	/* Spansion S34ML01G2, 128MB with 128KB erase blocks */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		 * This is called "nflash" in the vendor kernel with
+		 * "upgrade" and "rootfs" (probably using OpenWrt
+		 * splitpart). We call it "firmware" like standard tools
+		 * assume. The CFE loader contains incorrect information
+		 * about TRX partitions, ignore this, there are no TRX
+		 * partitions: this device uses SEAMA.
+		 */
+		firmware@0 {
+			compatible = "seama";
+			label = "firmware";
+			reg = <0x00000000 0x08000000>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+		};
+
+		port@1 {
+			label = "lan2";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan4";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			status = "disabled";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			label = "cpu";
+			phy-mode = "rgmii";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts
new file mode 100644
index 000000000000..2b5c80d835e9
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "linksys,panamera", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Linksys EA9500";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x100000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		button-rfkill {
+				label = "WiFi";
+				linux,code = <KEY_RFKILL>;
+				gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+		};
+
+		button-reset {
+				label = "Reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-wps {
+			label = "bcm53xx:white:wps";
+			gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb2 {
+			label = "bcm53xx:green:usb2";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-power {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wifi-disabled {
+			label = "bcm53xx:amber:wifi-disabled";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wifi-enabled {
+			label = "bcm53xx:white:wifi-enabled";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar1 {
+			label = "bcm53xx:white:bluebar1";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar2 {
+			label = "bcm53xx:white:bluebar2";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar3 {
+			label = "bcm53xx:white:bluebar3";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-bluebar4 {
+			label = "bcm53xx:white:bluebar4";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar5 {
+			label = "bcm53xx:white:bluebar5";
+			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar6 {
+			label = "bcm53xx:white:bluebar6";
+			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar7 {
+			label = "bcm53xx:white:bluebar7";
+			gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar8 {
+			label = "bcm53xx:white:bluebar8";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	mdio-mux@18003000 {
+
+		/* BIT(9) = 1 => external mdio */
+		mdio@200 {
+			reg = <0x200>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch@0  {
+				compatible = "brcm,bcm53125";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+				reset-names = "robo_reset";
+				reg = <0>;
+				dsa,member = <1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinmux_mdio>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						label = "lan1";
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan5";
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan2";
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan6";
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan3";
+					};
+
+					sw1_p8: port@8 {
+						reg = <8>;
+						ethernet = <&sw0_p0>;
+						label = "cpu";
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+				};
+			};
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+};
+
+&srab {
+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
+	status = "okay";
+	dsa,member = <0 0>;
+
+	ports {
+		sw0_p0: port@0 {
+			label = "extsw";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@1 {
+			label = "lan7";
+		};
+
+		port@2 {
+			label = "lan4";
+		};
+
+		port@3 {
+			label = "lan8";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			label = "cpu";
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@7 {
+			label = "cpu";
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@8 {
+			label = "cpu";
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&nandcs {
+	partitions {
+		compatible = "linksys,ns-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0000000 0x0080000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "nvram";
+			reg = <0x080000 0x0100000>;
+		};
+
+		partition@180000 {
+			label = "devinfo";
+			reg = <0x0180000 0x080000>;
+		};
+
+		partition@200000 {
+			reg = <0x0200000 0x01d00000>;
+			compatible = "linksys,ns-firmware", "brcm,trx";
+		};
+
+		partition@1f00000 {
+			reg = <0x01f00000 0x01d00000>;
+			compatible = "linksys,ns-firmware", "brcm,trx";
+		};
+
+		partition@5200000 {
+			label = "system";
+			reg = <0x05200000 0x02e00000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
new file mode 100644
index 000000000000..e374062eb5b7
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul ABR-4500 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+				<&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+			nvmem-cells = <&et0macaddr 1>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@1 {
+			label = "lan4";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan2";
+		};
+
+		port@4 {
+			label = "lan1";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
new file mode 100644
index 000000000000..badafa024d24
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+
+/ {
+	compatible = "luxul,xap-1610-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XAP-1610 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+
+&pcie0 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+			reg = <0x0000 0 0 0 0>;
+			brcm,ccode-map = "AU-AU-920", "CA-CA-892", "GB-DE-964", "NZ-AU-920", "US-US-825";
+		};
+	};
+};
+
+&pcie1 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+			reg = <0x0000 0 0 0 0>;
+			brcm,ccode-map = "AU-AU-920", "CA-CA-892", "GB-DE-964", "NZ-AU-920", "US-US-825";
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "poe";
+		};
+
+		port@1 {
+			label = "lan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
new file mode 100644
index 000000000000..cf95af9db1e6
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XBR-4500 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+
+		led-usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+				<&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+			nvmem-cells = <&et0macaddr 1>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@1 {
+			label = "lan4";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan2";
+		};
+
+		port@4 {
+			label = "lan1";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts
new file mode 100644
index 000000000000..992c19e1cfa1
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2019 Legrand AV Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,xwc-2000-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XWC-2000 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
new file mode 100644
index 000000000000..4d0ba315a204
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+	compatible = "luxul,xwr-3100-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XWR-3100 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-lan3 {
+			label = "bcm53xx:green:lan3";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-lan4 {
+			label = "bcm53xx:green:lan4";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan {
+			label = "bcm53xx:green:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-lan1 {
+			label = "bcm53xx:green:lan1";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		led-lan2 {
+			label = "bcm53xx:green:lan2";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+			nvmem-cells = <&et0macaddr 5>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
new file mode 100644
index 000000000000..83c429afc297
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XWR-3150 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&pcie0 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+			reg = <0x0000 0 0 0 0>;
+			brcm,ccode-map = "AU-AU-953", "CA-CA-946", "GB-E0-846", "NZ-AU-953", "US-Q2-930";
+		};
+	};
+};
+
+&pcie1 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+			reg = <0x0000 0 0 0 0>;
+			brcm,ccode-map = "AU-AU-953", "CA-CA-946", "GB-E0-846", "NZ-AU-953", "US-Q2-930";
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+			nvmem-cells = <&et0macaddr 5>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/broadcom/bcm47094-netgear-r8500.dts
index 859929973158..76d562610654 100644
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-netgear-r8500.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
  */
 
 /dts-v1/;
@@ -17,46 +16,47 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz-1 {
+		led-5ghz-1 {
 			label = "bcm53xx:white:5ghz-1";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz-2 {
+		led-5ghz-2 {
 			label = "bcm53xx:white:5ghz-2";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
@@ -64,31 +64,33 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		brightness {
+		button-brightness {
 			label = "Backlight";
 			linux,code = <KEY_BRIGHTNESS_ZERO>;
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-phicomm-k3.dts b/arch/arm/boot/dts/broadcom/bcm47094-phicomm-k3.dts
new file mode 100644
index 000000000000..bb1bc4e61bc2
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-phicomm-k3.dts
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Hamster Tian <haotia@gmail.com>
+ * Copyright (C) 2019 Hao Dong <halbertdong@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+	compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Phicomm K3";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0000000 0x0080000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "nvram";
+			reg = <0x0080000 0x0100000>;
+		};
+
+		partition@180000 {
+			label = "phicomm";
+			reg = <0x0180000 0x0280000>;
+			read-only;
+		};
+
+		partition@400000 {
+			label = "firmware";
+			reg = <0x0400000 0x7C00000>;
+			compatible = "brcm,trx";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094.dtsi b/arch/arm/boot/dts/broadcom/bcm47094.dtsi
new file mode 100644
index 000000000000..6282363313e1
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include "bcm4708.dtsi"
+
+/ {
+};
+
+&pinctrl {
+	compatible = "brcm,bcm4709-pinmux";
+
+	pinmux_mdio: mdio-pins {
+		groups = "mdio_grp";
+		function = "mdio";
+	};
+};
+
+&usb3_phy {
+	compatible = "brcm,ns-bx-usb3-phy";
+};
+
+&uart0 {
+	clock-frequency = <125000000>;
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
new file mode 100644
index 000000000000..a39a021a3910
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+	compatible = "luxul,xap-1440-v1", "brcm,bcm47189", "brcm,bcm53573";
+	model = "Luxul XAP-1440 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-wlan {
+			label = "bcm53xx:blue:wlan";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-system {
+			label = "bcm53xx:green:system";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-handle = <&bcm54210e>;
+
+	/delete-node/ fixed-link;
+
+	mdio {
+		/delete-node/ switch@1e;
+
+		bcm54210e: ethernet-phy@25 {
+			reg = <25>;
+		};
+	};
+};
+
+&gmac1 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts
new file mode 100644
index 000000000000..fd071da26cfa
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+	compatible = "luxul,xap-810-v1", "brcm,bcm47189", "brcm,bcm53573";
+	model = "Luxul XAP-810 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds-0 {
+		compatible = "gpio-leds";
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-system {
+			label = "bcm53xx:green:system";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	leds-1 {
+		compatible = "gpio-leds";
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pcie0 {
+	ranges = <0x00000000 0 0 0 0 0x00100000>;
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0,0 {
+		reg = <0x0000 0 0 0 0>;
+		ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,1,0 {
+			reg = <0x0000 0 0 0 0>;
+			ranges = <0x00000000 0 0 0 0x00100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pcie0_chipcommon: chipcommon@0 {
+				reg = <0 0x1000>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-handle = <&bcm54210e>;
+
+	/delete-node/ fixed-link;
+
+	mdio {
+		/delete-node/ switch@1e;
+
+		bcm54210e: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gmac1 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/broadcom/bcm47189-tenda-ac9.dts
new file mode 100644
index 000000000000..3ac6cac541ca
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47189-tenda-ac9.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+	compatible = "tenda,ac9", "brcm,bcm47189", "brcm,bcm53573";
+	model = "Tenda AC9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds-0 {
+		compatible = "gpio-leds";
+
+		led-usb {
+			label = "bcm53xx:blue:usb";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-wps {
+			label = "bcm53xx:blue:wps";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-system {
+			label = "bcm53xx:blue:system";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	leds-1 {
+		compatible = "gpio-leds";
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pcie0 {
+	ranges = <0x00000000 0 0 0 0 0x00100000>;
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0,0 {
+		reg = <0x0000 0 0 0 0>;
+		ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,1,0 {
+			reg = <0x0000 0 0 0 0>;
+			ranges = <0x00000000 0 0 0 0x00100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pcie0_chipcommon: chipcommon@0 {
+				reg = <0 0x1000>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
+
+&switch {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+		};
+
+		port@1 {
+			label = "lan1";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan3";
+		};
+
+		port@4 {
+			label = "lan4";
+		};
+
+		port@8 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47622.dtsi b/arch/arm/boot/dts/broadcom/bcm47622.dtsi
new file mode 100644
index 000000000000..485863f9c420
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47622.dtsi
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm47622", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>,
+			<&CA7_2>, <&CA7_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm47622-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
new file mode 100644
index 000000000000..08abfdc63d18
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Meraki MR26 / Codename: Venom
+ *
+ * Copyright (C) 2022 Christian Lamparter <chunkeey@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "meraki,mr26", "brcm,bcm53015", "brcm,bcm4708";
+	model = "Meraki MR26";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		key-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	clock-frequency = <50000000>;
+	/delete-property/ clocks;
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&gmac0 {
+	status = "okay";
+
+	nvmem-cells = <&macaddr_board_config_66>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	status = "disabled";
+};
+&gmac2 {
+	status = "disabled";
+};
+&gmac3 {
+	status = "disabled";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x200000>;
+			read-only;
+		};
+
+		partition@200000 {
+			label = "u-boot-env";
+			reg = <0x200000 0x200000>;
+			/* empty */
+		};
+
+		partition@400000 {
+			label = "u-boot-backup";
+			reg = <0x400000 0x200000>;
+			/* empty */
+		};
+
+		partition@600000 {
+			label = "u-boot-env-backup";
+			reg = <0x600000 0x200000>;
+			/* empty */
+		};
+
+		partition@800000 {
+			compatible = "linux,ubi";
+			label = "ubi";
+			reg = <0x800000 0x7780000>;
+
+			volumes {
+				ubi-volume-board-config {
+					volname = "board-config";
+
+					nvmem-layout {
+						compatible = "fixed-layout";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						macaddr_board_config_66: macaddr@66 {
+							reg = <0x66 0x6>;
+						};
+					};
+				};
+			};
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "poe";
+		};
+
+		port@5 {
+			label = "cpu";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_i2c>;
+
+	clock-frequency = <100000>;
+
+	ina219@40 {
+		compatible = "ti,ina219"; /* PoE power */
+		reg = <0x40>;
+		shunt-resistor = <60000>; /* = 60 mOhms */
+	};
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+		pagesize = <32>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* it's empty */
+	};
+};
+
+&thermal {
+	status = "disabled";
+	/* does not work, reads 418 degree Celsius */
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm53016-dlink-dwl-8610ap.dts b/arch/arm/boot/dts/broadcom/bcm53016-dlink-dwl-8610ap.dts
new file mode 100644
index 000000000000..c1f54391746f
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm53016-dlink-dwl-8610ap.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "D-Link DWL-8610AP";
+	compatible = "dlink,dwl-8610ap", "brcm,bcm53016", "brcm,bcm4708";
+
+	memory@0 {
+		device_type = "memory";
+		/* 512 MB RAM in 2 x Macronix D9PSH chips */
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-diag {
+			/* Actually "diag" unclear what this means */
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-wlan-2g {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wlan-5g {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			/* This GPIO is actually stored in NVRAM, but it's not gonna change */
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/*
+	 * Flash memory at 0x1e000000-0x1fffffff
+	 * Macronix 32 64KB blocks; total size 2MB, same that can be
+	 * found attached to the spi_nor SPI controller.
+	 */
+	nvram@1e080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1e080000 0x00020000>;
+
+		et0macaddr: et0macaddr {
+		};
+
+		et1macaddr: et1macaddr {
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et1macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	/* Serial SPI NOR Flash MX 25L1606E */
+	status = "okay";
+};
+
+&nandcs {
+	/*
+	 * Spansion S34ML01G100TFI00 128 MB NAND Flash memory
+	 *
+	 * This ECC is a bit unorthodox but it is what the stock firmware
+	 * is using, so to be able to mount the original partitions
+	 * this is necessary.
+	 */
+	nand-ecc-strength = <5>;
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* This is named nflash1.trx in CFE */
+		trx@0 {
+			label = "firmware";
+			reg = <0x00000000 0x02800000>;
+			compatible = "brcm,trx";
+		};
+
+		/* This is named nflash1.trx2 in CFE */
+		trx2@2800000 {
+			label = "firmware2";
+			reg = <0x02800000 0x02800000>;
+			compatible = "brcm,trx";
+		};
+
+		/* This is named nflash1.rwfs in CFE */
+		free@5000000 {
+			label = "free";
+			reg = <0x05000000 0x03000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts
new file mode 100644
index 000000000000..45bd27906f29
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Meraki MR32 / Codename: Espresso
+ *
+ * Copyright (C) 2018-2020 Christian Lamparter <chunkeey@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "meraki,mr32", "brcm,bcm53016", "brcm,bcm4708";
+	model = "Meraki MR32";
+
+	chosen {
+		bootargs = " console=ttyS0,115200n8 earlycon";
+	};
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	aliases {
+		serial1 = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sysled3 {
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+			panic-indicator;
+		};
+		sysled2 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		led-0 {
+			/* SYS-LED 1 - Tricolor */
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			pwms = <&pwm 0 50000 0>;
+			max-brightness = <255>;
+		};
+
+		led-1 {
+			/* SYS-LED 1 - Tricolor */
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			pwms = <&pwm 1 50000 0>;
+			max-brightness = <255>;
+		};
+
+		led-2 {
+			/* SYS-LED 1 - Tricolor */
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			pwms = <&pwm 2 50000 0>;
+			max-brightness = <255>;
+		};
+	};
+};
+
+&uart0 {
+	clock-frequency = <62500000>;
+	/delete-property/ clocks;
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&uart2 {
+	status = "okay";
+	/*
+	 * bluetooth-le {
+	 *	compatible = "brcm,bcm20732";
+	 *	enable-gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
+	 *};
+	 */
+};
+
+&gmac0 {
+	nvmem-cell-names = "mac-address";
+	nvmem-cells = <&mac_address>;
+};
+
+&gmac1 {
+	status = "disabled";
+};
+&gmac2 {
+	status = "disabled";
+};
+&gmac3 {
+	status = "disabled";
+};
+
+&pwm {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_pwm>;
+};
+
+&nandcs {
+	partitions {
+		/*
+		 * The partition autodetection does not work for this device.
+		 * It will only detect the "nvram" partition with an incorrect size.
+		 *	[    1.721667] 1 bcm47xxpart partitions found on MTD device brcmnand.0
+		 *	[    1.727962] Creating 1 MTD partitions on "brcmnand.0":
+		 *	[    1.733117] 0x000000400000-0x000008000000 : "nvram"
+		 */
+
+		compatible = "fixed-partitions";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x100000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "bootkernel1";
+			reg = <0x100000 0x300000>;
+			read-only;
+		};
+
+		partition@400000 {
+			label = "nvram";
+			reg = <0x400000 0x100000>;
+			read-only;
+		};
+
+		partition@500000 {
+			label = "bootkernel2";
+			reg = <0x500000 0x300000>;
+			read-only;
+		};
+
+		partition@800000 {
+			label = "ubi";
+			reg = <0x800000 0x7780000>;
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "poe";
+		};
+
+		port@5 {
+			label = "cpu";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_i2c>;
+
+	clock-frequency = <100000>;
+
+	current_sense: ina219@45 {
+		compatible = "ti,ina219";
+		reg = <0x45>;
+		shunt-resistor = <60000>; /* = 60 mOhms */
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		read-only;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mac_address: mac-address@66 {
+				reg = <0x66 0x6>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch1.dtsi
index 24b099c00f13..c349e8f0afc5 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch1.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom Northstar NAND.
  *
  * Copyright (C) 2016 Rafał Miłecki <rafal.milecki@gmail.com>
- *
- * Licensed under the ISC license.
  */
 
 #include "bcm5301x-nand-cs0.dtsi"
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch4.dtsi
index b4e875df9528..18e25e302b13 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch4.dtsi
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright 2016 Luxul Inc.
- *
- * Licensed under the ISC license.
  */
 
 #include "bcm5301x-nand-cs0.dtsi"
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch8.dtsi
index 9a9630ded306..c8e56d30bd6f 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch8.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X Nand chip defaults.
  *
@@ -5,8 +6,6 @@
  * and uses 8 bit ECC.
  *
  * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 #include "bcm5301x-nand-cs0.dtsi"
diff --git a/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0.dtsi
new file mode 100644
index 000000000000..be9a00ff752d
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom Northstar NAND.
+ *
+ * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
+ */
+
+/ {
+	nand-controller@18028000 {
+		nandcs: nand@0 {
+			compatible = "brcm,nandcs";
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partitions {
+				compatible = "brcm,bcm947xx-cfe-partitions";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm5301x.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x.dtsi
new file mode 100644
index 000000000000..f06a178a9240
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm5301x.dtsi
@@ -0,0 +1,136 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
+ * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcm-ns.dtsi"
+
+/ {
+	mpcore-bus@19000000 {
+		a9pll: arm_clk@0 {
+			#clock-cells = <0>;
+			compatible = "brcm,nsp-armpll";
+			clocks = <&osc>;
+			reg = <0x00000 0x1000>;
+		};
+
+		watchdog@20620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x20620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+		};
+
+		iprocmed: iprocmed {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		iprocslow: iprocslow {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&a9pll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+	};
+
+	i2c0: i2c@18009000 {
+		compatible = "brcm,iproc-i2c";
+		reg = <0x18009000 0x50>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <100000>;
+		status = "disabled";
+	};
+
+	dmu-bus@1800c000 {
+		cru-bus@100 {
+			lcpll0: clock-controller@100 {
+				#clock-cells = <1>;
+				compatible = "brcm,nsp-lcpll0";
+				reg = <0x100 0x14>;
+				clocks = <&osc>;
+				clock-output-names = "lcpll0", "pcie_phy",
+						     "sdio", "ddr_phy";
+			};
+
+			genpll: clock-controller@140 {
+				#clock-cells = <1>;
+				compatible = "brcm,nsp-genpll";
+				reg = <0x140 0x24>;
+				clocks = <&osc>;
+				clock-output-names = "genpll", "phy",
+						     "ethernetclk",
+						     "usbclk", "iprocfast",
+						     "sata1", "sata2";
+			};
+		};
+	};
+
+	spi@18029200 {
+		compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
+		reg = <0x18029200 0x184>,
+		      <0x18029000 0x124>,
+		      <0x1811b408 0x004>,
+		      <0x180293a0 0x01c>;
+		reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "mspi_done",
+				  "mspi_halted",
+				  "spi_lr_fullness_reached",
+				  "spi_lr_session_aborted",
+				  "spi_lr_impatient",
+				  "spi_lr_session_done",
+				  "spi_lr_overread";
+		clocks = <&iprocmed>;
+		num-cs = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		spi_nor: flash@0 {
+			compatible = "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <20000000>;
+			status = "disabled";
+
+			partitions {
+				compatible = "brcm,bcm947xx-cfe-partitions";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm53340-ubnt-unifi-switch8.dts b/arch/arm/boot/dts/broadcom/bcm53340-ubnt-unifi-switch8.dts
new file mode 100644
index 000000000000..08cf1220b655
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm53340-ubnt-unifi-switch8.dts
@@ -0,0 +1,85 @@
+/*
+ * DTS for Unifi Switch 8 port
+ *
+ * Copyright (C) 2017 Florian Fainelli <f.fainelli@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm-hr2.dtsi"
+
+/ {
+	compatible = "ubnt,unifi-switch8", "brcm,bcm53342", "brcm,hr2";
+	model = "Ubiquiti UniFi Switch 8 (BCM53342)";
+
+	/* Hurricane 2 designs use the second UART */
+	chosen {
+		bootargs = "console=ttyS1,115200 earlyprintk";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x68000000 0x08000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "m25p80";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <12500000>;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "u-boot-env";
+			reg = <0xc0000 0x10000>;
+		};
+
+		partition@d0000 {
+			label = "shmoo";
+			reg = <0xd0000 0x10000>;
+		};
+
+		partition@e0000 {
+			label = "kernel0";
+			reg = <0xe0000 0xf00000>;
+		};
+
+		partition@fe0000 {
+			label = "kernel1";
+			reg = <0xfe0000 0xf10000>;
+		};
+
+		partition@1ef0000 {
+			label = "cfg";
+			reg = <0x1ef0000 0x100000>;
+		};
+
+		partition@1ff0000 {
+			label = "EEPROM";
+			reg = <0x1ff0000 0x10000>;
+		};
+	};
+};
+
+&pcie0 {
+	/* Attaches to the internal switch */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm53573.dtsi b/arch/arm/boot/dts/broadcom/bcm53573.dtsi
new file mode 100644
index 000000000000..2df80740d181
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm53573.dtsi
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+	};
+
+	mpcore@18310000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18310000 0x00008000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+			      <0x2000 0x0100>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		alp: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <40000000>;
+		};
+	};
+
+	axi@18000000 {
+		compatible = "brcm,bus-axi";
+		reg = <0x18000000 0x1000>;
+		ranges = <0x00000000 0x18000000 0x00100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0x000fffff 0xffff>;
+		interrupt-map =
+			/* ChipCommon */
+			<0x00000000 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* IEEE 802.11 0 */
+			<0x00001000 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 0 */
+			<0x00002000 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 1 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 3 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 4 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 5 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* USB 2.0 Controller */
+			<0x00004000 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 0 */
+			<0x00005000 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* IEEE 802.11 1 */
+			<0x0000a000 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 1 */
+			<0x0000b000 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+		chipcommon: chipcommon@0 {
+			compatible = "simple-bus";
+			reg = <0x00000000 0x1000>;
+			ranges;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			uart0: serial@300 {
+				compatible = "ns16550a";
+				reg = <0x0300 0x100>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_PPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&alp>;
+				status = "okay";
+			};
+		};
+
+		pcie0: pcie@2000 {
+			reg = <0x00002000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+		};
+
+		usb2: usb2@4000 {
+			reg = <0x4000 0x1000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ehci: usb@4000 {
+				compatible = "generic-ehci";
+				reg = <0x4000 0x1000>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ehci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+
+				ehci_port2: port@2 {
+					reg = <2>;
+					#trigger-source-cells = <0>;
+				};
+			};
+
+			ohci: usb@d000 {
+				compatible = "generic-ohci";
+				reg = <0xd000 0x1000>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ohci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+
+				ohci_port2: port@2 {
+					reg = <2>;
+					#trigger-source-cells = <0>;
+				};
+			};
+		};
+
+		gmac0: ethernet@5000 {
+			reg = <0x5000 0x1000>;
+			phy-mode = "internal";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switch: switch@1e {
+					compatible = "brcm,bcm53125";
+					reg = <0x1e>;
+
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+						};
+
+						port@1 {
+							reg = <1>;
+						};
+
+						port@2 {
+							reg = <2>;
+						};
+
+						port@3 {
+							reg = <3>;
+						};
+
+						port@4 {
+							reg = <4>;
+						};
+
+						port@5 {
+							reg = <5>;
+							ethernet = <&gmac1>;
+
+							fixed-link {
+								speed = <1000>;
+								full-duplex;
+							};
+						};
+
+						port@8 {
+							reg = <8>;
+							ethernet = <&gmac0>;
+						};
+					};
+				};
+			};
+		};
+
+		gmac1: ethernet@b000 {
+			reg = <0xb000 0x1000>;
+			phy-mode = "internal";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		pmu@12000 {
+			compatible = "simple-mfd", "syscon";
+			reg = <0x00012000 0x00001000>;
+
+			ilp: ilp {
+				compatible = "brcm,bcm53573-ilp";
+				clocks = <&alp>;
+				#clock-cells = <0>;
+				clock-output-names = "ilp";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm63138.dtsi b/arch/arm/boot/dts/broadcom/bcm63138.dtsi
new file mode 100644
index 000000000000..4ec568586b14
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm63138.dtsi
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Broadcom BCM63138 DSL SoCs Device Tree
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm63138", "brcm,bcmbca";
+	model = "Broadcom BCM963138 Reference Board";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		uart0 = &serial0;
+		uart1 = &serial1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0>;
+			enable-method = "brcm,bcm63138";
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <1>;
+			enable-method = "brcm,bcm63138";
+			resets = <&pmb0 4 1>;
+		};
+	};
+
+	clocks {
+		/* UBUS peripheral clock */
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+			clock-output-names = "periph";
+		};
+
+		/* peripheral clock for system timer */
+		axi_clk: axi_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&armpll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/* APB bus clock */
+		apb_clk: apb_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&armpll>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	/* ARM bus */
+	axi@80000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x80000000 0x784000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		L2: cache-controller@1d000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x1d000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			cache-size = <524288>;
+			cache-sets = <1024>;
+			cache-line-size = <32>;
+			interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		scu: scu@1e000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x1e000 0x100>;
+		};
+
+		gic: interrupt-controller@1f000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x1f000 0x1000
+				0x1e100 0x100>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+		};
+
+		global_timer: timer@1e200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x1e200 0x20>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&axi_clk>;
+		};
+
+		local_timer: local-timer@1e600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x1e600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&axi_clk>;
+		};
+
+		twd_watchdog: watchdog@1e620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x1e620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		armpll: armpll@20000 {
+			#clock-cells = <0>;
+			compatible = "brcm,bcm63138-armpll";
+			clocks = <&periph_clk>;
+			reg = <0x20000 0xf00>;
+		};
+
+		pmb0: reset-controller@4800c0 {
+			compatible = "brcm,bcm63138-pmb";
+			reg = <0x4800c0 0x10>;
+			#reset-cells = <2>;
+		};
+
+		pmb1: reset-controller@4800e0 {
+			compatible = "brcm,bcm63138-pmb";
+			reg = <0x4800e0 0x10>;
+			#reset-cells = <2>;
+		};
+
+		ahci: sata@a000 {
+			compatible = "brcm,bcm63138-ahci", "brcm,sata3-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0xa000 0x9ac>, <0x8040 0x24>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&pmb0 3 1>;
+			reset-names = "ahci";
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+			};
+		};
+
+		sata_phy: sata-phy@8100 {
+			compatible = "brcm,bcm63138-sata-phy", "brcm,phy-sata3";
+			reg = <0x8100 0x1e00>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+		};
+	};
+
+	/* Legacy UBUS base */
+	ubus@fffe8000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xfffe8000 0x10000>;
+
+		timer: timer@80 {
+			compatible = "brcm,bcm6328-timer", "syscon";
+			reg = <0x80 0x3c>;
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@100 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x100 0x04>, <0x114 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@104 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x104 0x04>, <0x118 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@108 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x108 0x04>, <0x11c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@10c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x10c 0x04>, <0x120 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@110 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x110 0x04>, <0x124 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@300 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0x300 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		serial0: serial@600 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x600 0x1b>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "periph";
+			status = "disabled";
+		};
+
+		serial1: serial@620 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x620 0x1b>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "periph";
+			status = "disabled";
+		};
+
+		leds: led-controller@700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x700 0xdc>;
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@2000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
+			reg = <0x2000 0x600>, <0xf0 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "nand_ctlrdy";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		serial@4400 {
+			compatible = "brcm,bcm63138-hs-uart", "brcm,bcmbca-hs-uart";
+			reg = <0x4400 0x1e0>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		bootlut: bootlut@8000 {
+			compatible = "brcm,bcm63138-bootlut";
+			reg = <0x8000 0x50>;
+		};
+
+		pl081_dma: dma-controller@d000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0xd000 0x1000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&timer>;
+			offset = <0x34>;
+			mask = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm63148.dtsi b/arch/arm/boot/dts/broadcom/bcm63148.dtsi
new file mode 100644
index 000000000000..e071cddb28fc
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm63148.dtsi
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm63148", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		B15_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b15";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B15_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b15";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B15_0>, <&B15_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@80030000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x80030000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a15-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xfffe8000 0x8000>;
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@100 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x100 0x04>, <0x114 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@104 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x104 0x04>, <0x118 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@108 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x108 0x04>, <0x11c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@10c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x10c 0x04>, <0x120 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@110 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x110 0x04>, <0x124 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@300 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0x300 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		uart0: serial@600 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x600 0x20>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		leds: led-controller@700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x700 0xdc>;
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63148-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@2000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x2000 0x600>, <0xf0 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm63178.dtsi b/arch/arm/boot/dts/broadcom/bcm63178.dtsi
new file mode 100644
index 000000000000..430750b3030f
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm63178.dtsi
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm63178", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>,
+			<&CA7_2>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63178-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		leds: led-controller@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x3000 0xdc>;
+			status = "disabled";
+		};
+
+		pl081_dma: dma-controller@11000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x11000 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm6756.dtsi b/arch/arm/boot/dts/broadcom/bcm6756.dtsi
new file mode 100644
index 000000000000..6433f8fa5eff
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm6756.dtsi
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6756", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>,
+			<&CA7_2>, <&CA7_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm6846-genexis-xg6846b.dts b/arch/arm/boot/dts/broadcom/bcm6846-genexis-xg6846b.dts
new file mode 100644
index 000000000000..a3616fb7b3a8
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm6846-genexis-xg6846b.dts
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 Linus Walleij <linus.walleij@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "bcm6846.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Genexis XG6846B Ethernet layer 2/3 router";
+	compatible = "genexis,xg6846b", "brcm,bcm6846", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* Micron D9PTK 256 MB RAM */
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x10000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		secondary-boot@0 {
+			no-map;
+			reg = <0x00000000 0x00008000>;
+		};
+		pmc3-firmware@8000 {
+			no-map;
+			reg = <0x00008000 0x00100000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20000>;
+
+		/* Called "canyon rescue button" in the vendor DTB */
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 41 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+	/* Totally 79 GPIOs are available */
+	ngpios = <15>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+	brcm,serial-shift-bits = <16>;
+
+	led@0 {
+		reg = <0>;
+		active-low;
+		function = "ext";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@1 {
+		reg = <1>;
+		active-low;
+		function = "ext";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@3 {
+		reg = <3>;
+		active-low;
+		function = LED_FUNCTION_WAN;
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@4 {
+		reg = <4>;
+		active-low;
+		function = LED_FUNCTION_WAN;
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@5 {
+		reg = <5>;
+		active-low;
+		function = LED_FUNCTION_POWER;
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@6 {
+		reg = <6>;
+		active-low;
+		function = LED_FUNCTION_POWER;
+		color = <LED_COLOR_ID_RED>;
+	};
+
+	led@15 {
+		reg = <15>;
+		active-low;
+		function = LED_FUNCTION_USB;
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@7 {
+		/* Activity 03 */
+		reg = <7>;
+		active-low;
+		function = "lan1";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@8 {
+		/* Activity 04 */
+		reg = <8>;
+		active-low;
+		function = "lan1";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@9 {
+		/* Activity 03 */
+		reg = <9>;
+		active-low;
+		function = "lan2";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@10 {
+		/* Activity 04 */
+		reg = <10>;
+		active-low;
+		function = "lan2";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@11 {
+		/* Activity 03 */
+		reg = <11>;
+		active-low;
+		function = "lan3";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@12 {
+		/* Activity 04 */
+		reg = <12>;
+		active-low;
+		function = "lan3";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@13 {
+		/* Activity 03 */
+		reg = <13>;
+		active-low;
+		function = "lan4";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@14 {
+		/* Activity 04 */
+		reg = <14>;
+		active-low;
+		function = "lan4";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+
+	/* Winbond W29N02GV, 256MB with 128KB erase blocks */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		loader@0 {
+			label = "loader";
+			reg = <0x00000000 0x00400000>;
+		};
+		image@400000 {
+			label = "image";
+			reg = <0x00400000 0x0fb00000>;
+		};
+		/* 0x00ff0000-0x00ffffff: bad block list */
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+	phy2: ethernet-phy@2 {
+		reg = <2>;
+	};
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+	};
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+	};
+	phy21: ethernet-phy@21 {
+		reg = <21>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm6846.dtsi b/arch/arm/boot/dts/broadcom/bcm6846.dtsi
new file mode 100644
index 000000000000..f5591a45d2e4
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm6846.dtsi
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6846", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		uart0: serial@640 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x640 0x1b>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		leds: led-controller@800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x800 0xdc>;
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6846-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		mdio: mdio@2060 {
+			compatible = "brcm,bcm6846-mdio";
+			reg = <0x02060 0x10>, <0x5a068 0x4>;
+			reg-names = "mdio", "mdio_indir_rw";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pl081_dma: dma-controller@59000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x59000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm6855.dtsi b/arch/arm/boot/dts/broadcom/bcm6855.dtsi
new file mode 100644
index 000000000000..a88c3f0fbcb0
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm6855.dtsi
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6855", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>, <&CA7_2>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		watchdog@4c0 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x4c0 0x10>;
+			status = "disabled";
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6855-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		leds: led-controller@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x3000 0xdc>;
+			status = "disabled";
+		};
+
+		pl081_dma: dma-controller@11000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x11000 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart1: serial@13000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x13000 0x1000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm6878.dtsi b/arch/arm/boot/dts/broadcom/bcm6878.dtsi
new file mode 100644
index 000000000000..dd837bf69390
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm6878.dtsi
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6878", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		watchdog@4c0 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x4c0 0x10>;
+			status = "disabled";
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		leds: led-controller@700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x700 0xdc>;
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6878-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		pl081_dma: dma-controller@11000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x11000 0x1000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts b/arch/arm/boot/dts/broadcom/bcm7445-bcm97445svmb.dts
index 0bb8d17e4c2d..f92d2cf85972 100644
--- a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
+++ b/arch/arm/boot/dts/broadcom/bcm7445-bcm97445svmb.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 #include "bcm7445.dtsi"
 
@@ -5,7 +6,7 @@
 	model = "Broadcom STB (bcm7445), SVMB reference board";
 	compatible = "brcm,bcm7445", "brcm,brcmstb";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00 0x00000000 0x00 0x40000000>,
 		      <0x00 0x40000000 0x00 0x40000000>,
@@ -13,10 +14,10 @@
 	};
 };
 
-&nand {
+&nand_controller {
 	status = "okay";
 
-	nandcs@1 {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <1>;
 		nand-ecc-step-size = <512>;
diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/broadcom/bcm7445.dtsi
index 4791321969b3..c6307c7437e3 100644
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm7445.dtsi
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-#include "skeleton.dtsi"
-
 / {
 	#address-cells = <2>;
 	#size-cells = <2>;
@@ -64,7 +63,7 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
-	rdb {
+	rdb@f0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -149,7 +148,7 @@
 			reg-names = "aon-ctrl", "aon-sram";
 		};
 
-		nand: nand@3e2800 {
+		nand_controller: nand-controller@3e2800 {
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -225,7 +224,7 @@
 
 	};
 
-	memory_controllers {
+	memory_controllers@f1100000 {
 		compatible = "simple-bus";
 		ranges = <0x0 0x0 0xf1100000 0x200000>;
 		#address-cells = <1>;
@@ -238,7 +237,8 @@
 			ranges = <0x0 0x0 0x80000>;
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x800>;
 			};
 
@@ -253,14 +253,15 @@
 			};
 		};
 
-		memc@1 {
+		memc@80000 {
 			compatible = "brcm,brcmstb-memc", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x80000 0x80000>;
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x800>;
 			};
 
@@ -275,14 +276,15 @@
 			};
 		};
 
-		memc@2 {
+		memc@100000 {
 			compatible = "brcm,brcmstb-memc", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x100000 0x80000>;
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x800>;
 			};
 
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/broadcom/bcm911360_entphn.dts
index 000f5f19215e..363009e747b3 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/broadcom/bcm911360_entphn.dts
@@ -39,17 +39,18 @@
 	model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)";
 	compatible = "brcm,bcm11360", "brcm,cygnus";
 
+	aliases {
+		serial0 = &uart3;
+	};
+
 	chosen {
-		stdout-path = &uart3;
-		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		hook {
+		button-hook {
 			label = "HOOK";
 			linux,code = <KEY_O>;
 			gpios = <&gpio_asiu 48 0>;
@@ -81,8 +82,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm911360k.dts b/arch/arm/boot/dts/broadcom/bcm911360k.dts
index 091c73a46e08..091c73a46e08 100644
--- a/arch/arm/boot/dts/bcm911360k.dts
+++ b/arch/arm/boot/dts/broadcom/bcm911360k.dts
diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/broadcom/bcm94708.dts
index 2e08c895f281..d9eb2040b963 100644
--- a/arch/arm/boot/dts/bcm94708.dts
+++ b/arch/arm/boot/dts/broadcom/bcm94708.dts
@@ -38,7 +38,12 @@
 	model = "NorthStar SVK (BCM94708)";
 	compatible = "brcm,bcm94708", "brcm,bcm4708";
 
-	memory {
+	memory@0 {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/broadcom/bcm94709.dts
index c37616c67edc..618c812eef73 100644
--- a/arch/arm/boot/dts/bcm94709.dts
+++ b/arch/arm/boot/dts/broadcom/bcm94709.dts
@@ -38,7 +38,12 @@
 	model = "NorthStar SVK (BCM94709)";
 	compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
 
-	memory {
+	memory@0 {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm947189acdbmr.dts b/arch/arm/boot/dts/broadcom/bcm947189acdbmr.dts
new file mode 100644
index 000000000000..0b8727ae6f16
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm947189acdbmr.dts
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2017 Broadcom
+ * Author: Florian Fainelli <f.fainelli@gmail.com>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+	compatible = "brcm,bcm947189acdbmr", "brcm,bcm47189", "brcm,bcm53573";
+	model = "Broadcom BCM947189ACDBMR";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-wps {
+			label = "bcm53xx:blue:wps";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		sck-gpios = <&chipcommon 21 0>;
+		miso-gpios = <&chipcommon 22 0>;
+		mosi-gpios = <&chipcommon 23 0>;
+		cs-gpios = <&chipcommon 24 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* External BCM6802 MoCA chip is connected */
+	};
+};
+
+&pcie0 {
+	ranges = <0x00000000 0 0 0 0 0x00100000>;
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0,0 {
+		reg = <0x0000 0 0 0 0>;
+		ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,1,0 {
+			reg = <0x0000 0 0 0 0>;
+			ranges = <0x00000000 0 0 0 0x00100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm947622.dts b/arch/arm/boot/dts/broadcom/bcm947622.dts
new file mode 100644
index 000000000000..6241485408d3
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm947622.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm47622.dtsi"
+
+/ {
+	model = "Broadcom BCM947622 Reference Board";
+	compatible = "brcm,bcm947622", "brcm,bcm47622", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/broadcom/bcm953012er.dts
index 40e694bfe5ca..d939ec9f4a9e 100644
--- a/arch/arm/boot/dts/bcm953012er.dts
+++ b/arch/arm/boot/dts/broadcom/bcm953012er.dts
@@ -37,24 +37,23 @@
 
 / {
 	model = "NorthStar Enterprise Router (BCM953012ER)";
-	compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
+	compatible = "brcm,bcm953012er", "brcm,bcm53012", "brcm,bcm4708";
 
-	memory {
+	memory@0 {
+		device_type = "memory";
 		reg = <0x00000000 0x8000000>;
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
@@ -70,9 +69,6 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			reg = <0>;
 			label = "port0";
@@ -88,5 +84,17 @@
 			label = "cpu";
 			ethernet = <&gmac0>;
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm953012hr.dts b/arch/arm/boot/dts/broadcom/bcm953012hr.dts
index 3076e81699cf..b728cd54715e 100644
--- a/arch/arm/boot/dts/bcm953012hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm953012hr.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar HR (BCM953012HR)";
-	compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708";
+	compatible = "brcm,bcm953012hr", "brcm,bcm53012", "brcm,bcm4708";
 
 	aliases {
 		ethernet0 = &gmac0;
@@ -46,6 +46,7 @@
 	};
 
 	memory@80000000 {
+		device_type = "memory";
 		reg = <0x80000000 0x10000000>;
 	};
 };
@@ -73,7 +74,6 @@
 &spi_nor {
 	status = "okay";
 	spi-max-frequency = <62500000>;
-	m25p,default-addr-width = <3>;
 
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -95,3 +95,7 @@
 		reg = <0x00700000 0x00900000>;
 	};
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/broadcom/bcm953012k.dts
index 79c168e2714b..27c0992f1855 100644
--- a/arch/arm/boot/dts/bcm953012k.dts
+++ b/arch/arm/boot/dts/broadcom/bcm953012k.dts
@@ -36,20 +36,21 @@
 
 / {
 	model = "NorthStar SVK (BCM953012K)";
-	compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708";
+	compatible = "brcm,bcm953012k", "brcm,bcm53012", "brcm,bcm4708";
 
 	aliases {
 		serial0 = &uart0;
 		serial1 = &uart1;
 	};
 
-	memory {
+	memory@80000000 {
+		device_type = "memory";
 		reg = <0x80000000 0x10000000>;
 	};
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -83,7 +84,6 @@
 &spi_nor {
 	status = "okay";
 	spi-max-frequency = <62500000>;
-	m25p,default-addr-width = <3>;
 
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -113,3 +113,7 @@
 &uart1 {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/broadcom/bcm958300k.dts
index b4a1392bd5a6..dda3e11b711f 100644
--- a/arch/arm/boot/dts/bcm958300k.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958300k.dts
@@ -60,8 +60,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/broadcom/bcm958305k.dts
index 3378683321d3..ea3c6b88b313 100644
--- a/arch/arm/boot/dts/bcm958305k.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958305k.dts
@@ -68,8 +68,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/broadcom/bcm958522er.dts
index f5c42962c201..2f20f86bd31c 100644
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958522er.dts
@@ -37,17 +37,13 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958522ER)";
-	compatible = "brcm,bcm58522", "brcm,nsp";
-
-	aliases {
-		serial0 = &uart0;
-	};
+	compatible = "brcm,bcm958522er", "brcm,bcm58522", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x80000000>;
 	};
@@ -62,6 +58,10 @@
 
 /* USB 3 support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
@@ -74,8 +74,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -134,8 +134,8 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
-	flash: m25p80@0 {
+	status = "okay";
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
@@ -170,3 +170,15 @@
 &uart0 {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm58522-srab", "brcm,nsp-srab";
+};
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/broadcom/bcm958525er.dts
index efcb1f67bdad..980c03f74a19 100644
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958525er.dts
@@ -37,17 +37,13 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958525ER)";
-	compatible = "brcm,bcm58525", "brcm,nsp";
-
-	aliases {
-		serial0 = &uart0;
-	};
+	compatible = "brcm,bcm958525er", "brcm,bcm58525", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x80000000>;
 	};
@@ -62,6 +58,10 @@
 
 /* USB 3 support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
@@ -74,8 +74,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -134,8 +134,8 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
-	flash: m25p80@0 {
+	status = "okay";
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
@@ -182,3 +182,15 @@
 &uart0 {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm58525-srab", "brcm,nsp-srab";
+};
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/broadcom/bcm958525xmc.dts
index b335ce02e32f..440bb2d617f2 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958525xmc.dts
@@ -37,17 +37,13 @@
 
 / {
 	model = "NorthStar Plus XMC (BCM958525xmc)";
-	compatible = "brcm,bcm58525", "brcm,nsp";
-
-	aliases {
-		serial0 = &uart0;
-	};
+	compatible = "brcm,bcm958525xmc", "brcm,bcm58525", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
 	};
@@ -62,6 +58,10 @@
 
 /* XHCI support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
@@ -90,8 +90,8 @@
 	};
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -150,8 +150,8 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
-	flash: m25p80@0 {
+	status = "okay";
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
@@ -196,9 +196,21 @@
 };
 
 &sdio {
-	status = "ok";
+	status = "okay";
 };
 
 &uart0 {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm58525-srab", "brcm,nsp-srab";
+};
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/broadcom/bcm958622hr.dts
index 16ab2d82a14b..116f3a7c3bc6 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958622hr.dts
@@ -37,17 +37,13 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958622HR)";
-	compatible = "brcm,bcm58622", "brcm,nsp";
-
-	aliases {
-		serial0 = &uart0;
-	};
+	compatible = "brcm,bcm958622hr", "brcm,bcm58622", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x80000000>;
 	};
@@ -62,6 +58,10 @@
 
 /* USB 3 and SLIC support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
@@ -78,8 +78,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -138,8 +138,8 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
-	flash: m25p80@0 {
+	status = "okay";
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
@@ -176,9 +176,6 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			label = "port0";
 			reg = <0>;
@@ -204,10 +201,10 @@
 			reg = <4>;
 		};
 
-		port@5 {
-			ethernet = <&amac0>;
+		port@8 {
+			ethernet = <&amac2>;
 			label = "cpu";
-			reg = <5>;
+			reg = <8>;
 			fixed-link {
 				speed = <1000>;
 				full-duplex;
@@ -219,3 +216,11 @@
 &uart0 {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/broadcom/bcm958623hr.dts
index 9b921c6aa8f8..fc6ab73ecf56 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958623hr.dts
@@ -37,17 +37,13 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958623HR)";
-	compatible = "brcm,bcm58623", "brcm,nsp";
-
-	aliases {
-		serial0 = &uart0;
-	};
+	compatible = "brcm,bcm958623hr", "brcm,bcm58623", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x80000000>;
 	};
@@ -62,6 +58,10 @@
 
 /* USB 3 and SLIC support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
@@ -78,8 +78,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -141,13 +141,9 @@
 	status = "okay";
 };
 
-&sata {
-	status = "okay";
-};
-
 &qspi {
-	bspi-sel = <0>;
-	flash: m25p80@0 {
+	status = "okay";
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
@@ -184,9 +180,6 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			label = "port0";
 			reg = <0>;
@@ -212,10 +205,10 @@
 			reg = <4>;
 		};
 
-		port@5 {
-			ethernet = <&amac0>;
+		port@8 {
+			ethernet = <&amac2>;
 			label = "cpu";
-			reg = <5>;
+			reg = <8>;
 			fixed-link {
 				speed = <1000>;
 				full-duplex;
@@ -227,3 +220,11 @@
 &uart0 {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi
new file mode 100644
index 000000000000..c54451dde6dd
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65 series (Alamo).
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm958625-meraki-mx6x-common.dtsi"
+
+/ {
+	keys {
+		compatible = "gpio-keys-polled";
+		autorepeat;
+		poll-interval = <20>;
+
+		button-reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpioa 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/* green:wan1-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <0>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			/* green:wan1-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			/* green:wan2-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			/* green:wan2-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <3>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			/* amber:power */
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5 {
+			/* white:status */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&axi {
+	mdio-mux@3f1c0 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		reg = <0x3f1c0 0x4>;
+		mux-mask = <0x2000>;
+		mdio-parent-bus = <&mdio_ext>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port6: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port7: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port8: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port9: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port10: phy@4 {
+				reg = <4>;
+			};
+
+			switch@10 {
+				compatible = "qca,qca8337";
+				reg = <0x10>;
+				dsa,member = <1 0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						ethernet = <&sgmii1>;
+						phy-mode = "sgmii";
+						qca,sgmii-enable-pll;
+						qca,sgmii-txclk-falling-edge;
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan8";
+						phy-handle = <&phy_port6>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan9";
+						phy-handle = <&phy_port7>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan10";
+						phy-handle = <&phy_port8>;
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan11";
+						phy-handle = <&phy_port9>;
+					};
+
+					port@5 {
+						reg = <5>;
+						label = "lan12";
+						phy-handle = <&phy_port10>;
+					};
+				};
+			};
+		};
+
+		mdio-mii@2000 {
+			reg = <0x2000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port5: phy@4 {
+				reg = <4>;
+			};
+
+			switch@10 {
+				compatible = "qca,qca8337";
+				reg = <0x10>;
+				dsa,member = <2 0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						ethernet = <&sgmii0>;
+						phy-mode = "sgmii";
+						qca,sgmii-enable-pll;
+						qca,sgmii-txclk-falling-edge;
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan3";
+						phy-handle = <&phy_port1>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan4";
+						phy-handle = <&phy_port2>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan5";
+						phy-handle = <&phy_port3>;
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan6";
+						phy-handle = <&phy_port4>;
+					};
+
+					port@5 {
+						reg = <5>;
+						label = "lan7";
+						phy-handle = <&phy_port5>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+	status = "okay";
+	dsa,member = <0 0>;
+
+	ports {
+		port@0 {
+			label = "wan1";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "wan2";
+			reg = <1>;
+		};
+
+		sgmii0: port@4 {
+			label = "sw0";
+			reg = <4>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		sgmii1: port@5 {
+			label = "sw1";
+			reg = <5>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi b/arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi
new file mode 100644
index 000000000000..1830844c8404
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 series (Kingpin).
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm958625-meraki-mx6x-common.dtsi"
+
+/ {
+
+	keys {
+		compatible = "gpio-keys-polled";
+		autorepeat;
+		poll-interval = <20>;
+
+		button-reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpioa 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/* green:lan1-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <0>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 19 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			/* green:lan1-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 18 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			/* green:lan2-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			/* green:lan2-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <3>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 20 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			/* green:lan3-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <4>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			/* green:lan3-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <5>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			/* green:lan4-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <6>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
+		};
+
+		led-7 {
+			/* green:lan4-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <7>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
+		};
+
+		led-8 {
+			/* green:wan-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <8>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 30 GPIO_ACTIVE_LOW>;
+		};
+
+		led-9 {
+			/* green:wan-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <9>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 29 GPIO_ACTIVE_LOW>;
+		};
+
+		led-a {
+			/* amber:power */
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led-b {
+			/* white:status */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "lan2";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "lan3";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "lan4";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "wan";
+			reg = <4>;
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64-a0.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64-a0.dts
new file mode 100644
index 000000000000..9944566c1195
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64-a0.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 with A0 SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+#include "bcm-nsp-ax.dtsi"
+
+/ {
+	model = "Cisco Meraki MX64(A0)";
+	compatible = "meraki,mx64-a0", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64.dts
new file mode 100644
index 000000000000..06939438e874
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 with B0+ SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+
+/ {
+	model = "Cisco Meraki MX64";
+	compatible = "meraki,mx64", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w-a0.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w-a0.dts
new file mode 100644
index 000000000000..112fddb1eed8
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w-a0.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64W with A0 SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+#include "bcm-nsp-ax.dtsi"
+
+/ {
+	model = "Cisco Meraki MX64W(A0)";
+	compatible = "meraki,mx64w-a0", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w.dts
new file mode 100644
index 000000000000..de2e367c3e78
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64W with B0+ SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+
+/ {
+	model = "Cisco Meraki MX64W";
+	compatible = "meraki,mx64w", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65.dts
new file mode 100644
index 000000000000..d1b684dcdbfa
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-alamo.dtsi"
+
+/ {
+	model = "Cisco Meraki MX65";
+	compatible = "meraki,mx65", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65w.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65w.dts
new file mode 100644
index 000000000000..a2165aba3676
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65w.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65W.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-alamo.dtsi"
+
+/ {
+	model = "Cisco Meraki MX65W";
+	compatible = "meraki,mx65w", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi
new file mode 100644
index 000000000000..7e71aecb7251
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Common Bindings for Cisco Meraki MX64 (Kingpin) and MX65 (Alamo) devices.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			pwms = <&pwm 1 50000 0>;
+			max-brightness = <255>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			pwms = <&pwm 2 50000 0>;
+			max-brightness = <255>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			pwms = <&pwm 3 50000 0>;
+			max-brightness = <255>;
+		};
+	};
+};
+
+&amac2 {
+	status = "okay";
+	nvmem-cells = <&mac_address>;
+	nvmem-cell-names = "mac-address";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		read-only;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mac_address: mac-address@66 {
+				reg = <0x66 0x6>;
+			};
+		};
+	};
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "shmoo";
+			reg = <0x80000 0x80000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "bootkernel1";
+			reg = <0x100000 0x300000>;
+		};
+
+		partition@400000 {
+			label = "nvram";
+			reg = <0x400000 0x100000>;
+		};
+
+		partition@500000 {
+			label = "bootkernel2";
+			reg = <0x500000 0x300000>;
+		};
+
+		partition@800000 {
+			label = "ubi";
+			reg = <0x800000 0x3f700000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_leds>;
+
+	pwm_leds: pwm_leds {
+		function = "pwm";
+		groups = "pwm1_grp", "pwm2_grp", "pwm3_grp";
+	};
+};
+
+&pwm {
+	status = "okay";
+};
+
+&uart0 {
+	clock-frequency = <62500000>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/broadcom/bcm958625hr.dts
index 006b08e41a3b..a9b6aa04d573 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958625hr.dts
@@ -37,19 +37,15 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958625HR)";
-	compatible = "brcm,bcm58625", "brcm,nsp";
-
-	aliases {
-		serial0 = &uart0;
-	};
+	compatible = "brcm,bcm958625hr", "brcm,bcm58625", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
-		reg = <0x60000000 0x80000000>;
+		reg = <0x60000000 0x20000000>;
 	};
 
 	gpio-restart {
@@ -58,6 +54,23 @@
 		open-source;
 		priority = <200>;
 	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c0>;
+		mod-def0-gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioa 24 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioa 30 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioa 26 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&dma {
+	status = "okay";
 };
 
 &amac0 {
@@ -76,8 +89,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -136,8 +149,8 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
-	flash: m25p80@0 {
+	status = "okay";
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
@@ -177,18 +190,11 @@
 	status = "okay";
 };
 
-&sata {
-	status = "okay";
-};
-
 &srab {
 	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			label = "port0";
 			reg = <0>;
@@ -215,9 +221,17 @@
 		};
 
 		port@5 {
-			ethernet = <&amac0>;
-			label = "cpu";
+			label = "sfp";
+			phy-mode = "sgmii";
 			reg = <5>;
+			sfp = <&sfp>;
+			managed = "in-band-status";
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			label = "cpu";
+			reg = <8>;
 			fixed-link {
 				speed = <1000>;
 				full-duplex;
@@ -229,3 +243,11 @@
 &uart0 {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/broadcom/bcm958625k.dts
index 64740f85cf4c..7996116fc923 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958625k.dts
@@ -36,23 +36,22 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958625K)";
-	compatible = "brcm,bcm58625", "brcm,nsp";
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-	};
+	compatible = "brcm,bcm958625k", "brcm,bcm58625", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x80000000>;
 	};
 };
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
@@ -69,8 +68,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -154,8 +153,8 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
-	flash: m25p80@0 {
+	status = "okay";
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
@@ -209,7 +208,7 @@
 &sdio {
 	bus-width = <4>;
 	no-1-8-v;
-	status = "ok";
+	status = "okay";
 };
 
 &srab {
@@ -217,9 +216,6 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			label = "port0";
 			reg = <0>;
@@ -245,10 +241,10 @@
 			reg = <4>;
 		};
 
-		port@5 {
-			ethernet = <&amac0>;
+		port@8 {
+			ethernet = <&amac2>;
 			label = "cpu";
-			reg = <5>;
+			reg = <8>;
 			fixed-link {
 				speed = <1000>;
 				full-duplex;
@@ -264,3 +260,11 @@
 &uart1 {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm963138.dts b/arch/arm/boot/dts/broadcom/bcm963138.dts
new file mode 100644
index 000000000000..7fd87e05ec20
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm963138.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63138.dtsi"
+
+/ {
+	model = "Broadcom BCM963138 Reference Board";
+	compatible = "brcm,bcm963138", "brcm,bcm63138", "brcm,bcmbca";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serial0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm963138dvt.dts b/arch/arm/boot/dts/broadcom/bcm963138dvt.dts
new file mode 100644
index 000000000000..f60d09908ab9
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm963138dvt.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Broadcom BCM63138 Reference Board DTS
+ */
+
+/dts-v1/;
+
+#include "bcm63138.dtsi"
+
+/ {
+	compatible = "brcm,BCM963138DVT", "brcm,bcm63138", "brcm,bcmbca";
+	model = "Broadcom BCM963138DVT";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serial0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+	brcm,nand-oob-sector-size = <16>;
+	nand-on-flash-bbt;
+};
+
+&ahci {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm963148.dts b/arch/arm/boot/dts/broadcom/bcm963148.dts
new file mode 100644
index 000000000000..44bca063a327
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm963148.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63148.dtsi"
+
+/ {
+	model = "Broadcom BCM963148 Reference Board";
+	compatible = "brcm,bcm963148", "brcm,bcm63148", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm963178.dts b/arch/arm/boot/dts/broadcom/bcm963178.dts
new file mode 100644
index 000000000000..098a222cd71a
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm963178.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63178.dtsi"
+
+/ {
+	model = "Broadcom BCM963178 Reference Board";
+	compatible = "brcm,bcm963178", "brcm,bcm63178", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm96756.dts b/arch/arm/boot/dts/broadcom/bcm96756.dts
new file mode 100644
index 000000000000..402038d3cd0c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm96756.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6756.dtsi"
+
+/ {
+	model = "Broadcom BCM96756 Reference Board";
+	compatible = "brcm,bcm96756", "brcm,bcm6756", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm96846.dts b/arch/arm/boot/dts/broadcom/bcm96846.dts
new file mode 100644
index 000000000000..943896afb7cc
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm96846.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6846.dtsi"
+
+/ {
+	model = "Broadcom BCM96846 Reference Board";
+	compatible = "brcm,bcm96846", "brcm,bcm6846", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm96855.dts b/arch/arm/boot/dts/broadcom/bcm96855.dts
new file mode 100644
index 000000000000..571663d9a1ea
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm96855.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6855.dtsi"
+
+/ {
+	model = "Broadcom BCM96855 Reference Board";
+	compatible = "brcm,bcm96855", "brcm,bcm6855", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm96878.dts b/arch/arm/boot/dts/broadcom/bcm96878.dts
new file mode 100644
index 000000000000..8d6eddd54c6e
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm96878.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6878.dtsi"
+
+/ {
+	model = "Broadcom BCM96878 Reference Board";
+	compatible = "brcm,bcm96878", "brcm,bcm6878", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/broadcom/bcm988312hr.dts
index bce251a68591..663a3f27b6e4 100644
--- a/arch/arm/boot/dts/bcm988312hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm988312hr.dts
@@ -37,17 +37,13 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM988312HR)";
-	compatible = "brcm,bcm88312", "brcm,nsp";
-
-	aliases {
-		serial0 = &uart0;
-	};
+	compatible = "brcm,bcm988312hr", "brcm,bcm88312", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x80000000>;
 	};
@@ -62,6 +58,10 @@
 
 /* USB 3 support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
@@ -78,8 +78,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -138,8 +138,8 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
-	flash: m25p80@0 {
+	status = "okay";
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
@@ -188,9 +188,6 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			label = "port0";
 			reg = <0>;
@@ -216,10 +213,10 @@
 			reg = <4>;
 		};
 
-		port@5 {
-			ethernet = <&amac0>;
+		port@8 {
+			ethernet = <&amac2>;
 			label = "cpu";
-			reg = <5>;
+			reg = <8>;
 			fixed-link {
 				speed = <1000>;
 				full-duplex;
diff --git a/arch/arm/boot/dts/bcm9hmidc.dtsi b/arch/arm/boot/dts/broadcom/bcm9hmidc.dtsi
index 65397c088335..65397c088335 100644
--- a/arch/arm/boot/dts/bcm9hmidc.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm9hmidc.dtsi
diff --git a/arch/arm/boot/dts/calxeda/Makefile b/arch/arm/boot/dts/calxeda/Makefile
new file mode 100644
index 000000000000..f5126b6d26ad
--- /dev/null
+++ b/arch/arm/boot/dts/calxeda/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_HIGHBANK) += \
+	highbank.dtb \
+	ecx-2000.dtb
+dtb-$(CONFIG_ARCH_HIGHBANK) += \
+	highbank.dtb \
+	ecx-2000.dtb
diff --git a/arch/arm/boot/dts/calxeda/ecx-2000.dts b/arch/arm/boot/dts/calxeda/ecx-2000.dts
new file mode 100644
index 000000000000..f6eb71553b95
--- /dev/null
+++ b/arch/arm/boot/dts/calxeda/ecx-2000.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2011-2012 Calxeda, Inc.
+ */
+
+/dts-v1/;
+
+/* First 4KB has pen for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+
+/ {
+	model = "Calxeda ECX-2000";
+	compatible = "calxeda,ecx-2000";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+		};
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0xff800000>;
+	};
+
+	memory@200000000 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x00000002 0x00000000 0x00000003 0x00000000>;
+	};
+
+	soc {
+		ranges = <0x00000000 0x00000000 0x00000000 0xffffffff>;
+
+		timer {
+			compatible = "arm,cortex-a15-timer", "arm,armv7-timer"; 			interrupts = <1 13 0xf08>,
+				<1 14 0xf08>,
+				<1 11 0xf08>,
+				<1 10 0xf08>;
+		};
+
+		memory-controller@fff00000 {
+			compatible = "calxeda,ecx-2000-ddr-ctrl";
+			reg = <0xfff00000 0x1000>;
+			interrupts = <0 91 4>;
+		};
+
+		intc: interrupt-controller@fff11000 {
+			compatible = "arm,cortex-a15-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <1 9 0xf04>;
+			reg = <0xfff11000 0x1000>,
+			      <0xfff12000 0x2000>,
+			      <0xfff14000 0x2000>,
+			      <0xfff16000 0x2000>;
+		};
+
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>;
+		};
+	};
+};
+
+/include/ "ecx-common.dtsi"
diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/calxeda/ecx-common.dtsi
index b90045a8f8e3..ce5221c6b358 100644
--- a/arch/arm/boot/dts/ecx-common.dtsi
+++ b/arch/arm/boot/dts/calxeda/ecx-common.dtsi
@@ -1,17 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright 2011-2012 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 / {
@@ -20,11 +9,11 @@
 	};
 
 	psci {
-		compatible	= "arm,psci";
-		method		= "smc";
-		cpu_suspend	= <0x84000002>;
-		cpu_off		= <0x84000004>;
-		cpu_on		= <0x84000006>;
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000002>;
+		cpu_off = <0x84000004>;
+		cpu_on = <0x84000006>;
 	};
 
 	soc {
@@ -38,10 +27,11 @@
 			reg = <0xffe08000 0x10000>;
 			interrupts = <0 83 4>;
 			dma-coherent;
-			calxeda,port-phys = <&combophy5 0 &combophy0 0
-					     &combophy0 1 &combophy0 2
-					     &combophy0 3>;
-			calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>;
+			calxeda,port-phys = < &combophy5 0>, <&combophy0 0>,
+					     <&combophy0 1>, <&combophy0 2>,
+					     <&combophy0 3>;
+			calxeda,sgpio-gpio =<&gpioh 5 1>, <&gpioh 6 1>,
+					    <&gpioh 7 1>;
 			calxeda,led-order = <4 0 1 2 3>;
 		};
 
@@ -125,8 +115,8 @@
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xfff36000 0x1000>;
 			interrupts = <0 20 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
+			clocks = <&pclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
 		};
 
 		smic@fff3a000 {
@@ -213,14 +203,14 @@
 		ethernet@fff50000 {
 			compatible = "calxeda,hb-xgmac";
 			reg = <0xfff50000 0x1000>;
-			interrupts = <0 77 4  0 78 4  0 79 4>;
+			interrupts = <0 77 4>, <0 78 4>, <0 79 4>;
 			dma-coherent;
 		};
 
 		ethernet@fff51000 {
 			compatible = "calxeda,hb-xgmac";
 			reg = <0xfff51000 0x1000>;
-			interrupts = <0 80 4  0 81 4  0 82 4>;
+			interrupts = <0 80 4>, <0 81 4>, <0 82 4>;
 			dma-coherent;
 		};
 
diff --git a/arch/arm/boot/dts/calxeda/highbank.dts b/arch/arm/boot/dts/calxeda/highbank.dts
new file mode 100644
index 000000000000..b6b0225a769e
--- /dev/null
+++ b/arch/arm/boot/dts/calxeda/highbank.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2011-2012 Calxeda, Inc.
+ */
+
+/dts-v1/;
+
+/* First 4KB has pen for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+
+/ {
+	model = "Calxeda Highbank";
+	compatible = "calxeda,highbank";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@900 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0x900>;
+			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+			operating-points = <
+				/* kHz    ignored */
+				 1300000  1000000
+				 1200000  1000000
+				 1100000  1000000
+				  800000  1000000
+				  400000  1000000
+				  200000  1000000
+			>;
+			clock-latency = <100000>;
+		};
+
+		cpu@901 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0x901>;
+			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+			operating-points = <
+				/* kHz    ignored */
+				 1300000  1000000
+				 1200000  1000000
+				 1100000  1000000
+				  800000  1000000
+				  400000  1000000
+				  200000  1000000
+			>;
+			clock-latency = <100000>;
+		};
+
+		cpu@902 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0x902>;
+			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+			operating-points = <
+				/* kHz    ignored */
+				 1300000  1000000
+				 1200000  1000000
+				 1100000  1000000
+				  800000  1000000
+				  400000  1000000
+				  200000  1000000
+			>;
+			clock-latency = <100000>;
+		};
+
+		cpu@903 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0x903>;
+			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+			operating-points = <
+				/* kHz    ignored */
+				 1300000  1000000
+				 1200000  1000000
+				 1100000  1000000
+				  800000  1000000
+				  400000  1000000
+				  200000  1000000
+			>;
+			clock-latency = <100000>;
+		};
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x00000000 0xff900000>;
+	};
+
+	soc {
+		ranges = <0x00000000 0x00000000 0xffffffff>;
+
+		memory-controller@fff00000 {
+			compatible = "calxeda,hb-ddr-ctrl";
+			reg = <0xfff00000 0x1000>;
+			interrupts = <0 91 4>;
+		};
+
+		timer@fff10600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xfff10600 0x20>;
+			interrupts = <1 13 0xf01>;
+			clocks = <&a9periphclk>;
+		};
+
+		watchdog@fff10620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0xfff10620 0x20>;
+			interrupts = <1 14 0xf01>;
+			clocks = <&a9periphclk>;
+		};
+
+		intc: interrupt-controller@fff11000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0xfff11000 0x1000>,
+			      <0xfff10100 0x100>;
+		};
+
+		L2: cache-controller {
+			compatible = "arm,pl310-cache";
+			reg = <0xfff12000 0x1000>;
+			interrupts = <0 70 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>;
+		};
+
+
+		sregs@fff3c200 {
+			compatible = "calxeda,hb-sregs-l2-ecc";
+			reg = <0xfff3c200 0x100>;
+			interrupts = <0 71 4>, <0 72 4>;
+		};
+
+	};
+};
+
+/include/ "ecx-common.dtsi"
diff --git a/arch/arm/boot/dts/cirrus/Makefile b/arch/arm/boot/dts/cirrus/Makefile
new file mode 100644
index 000000000000..e6015983e464
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_CLPS711X) += \
+	ep7211-edb7211.dtb
+dtb-$(CONFIG_ARCH_CLPS711X) += \
+	ep7211-edb7211.dtb
+dtb-$(CONFIG_ARCH_EP93XX) += \
+	ep93xx-edb9302.dtb \
+	ep93xx-bk3.dtb \
+	ep93xx-ts7250.dtb
diff --git a/arch/arm/boot/dts/ep7209.dtsi b/arch/arm/boot/dts/cirrus/ep7209.dtsi
index aaf1261d2ee4..57bdad2c1994 100644
--- a/arch/arm/boot/dts/ep7209.dtsi
+++ b/arch/arm/boot/dts/cirrus/ep7209.dtsi
@@ -1,19 +1,17 @@
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- */
+// SPDX-License-Identifier: GPL-2.0-or-later
 
 /dts-v1/;
 
-#include "skeleton.dtsi"
-
 #include <dt-bindings/clock/clps711x-clock.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Cirrus Logic EP7209";
 	compatible = "cirrus,ep7209";
 
+	chosen { };
+
 	aliases {
 		gpio0 = &porta;
 		gpio1 = &portb;
@@ -112,6 +110,7 @@
 			compatible = "cirrus,ep7209-fb";
 			reg = <0x800002c0 0xd44>, <0x60000000 0xc000>;
 			clocks = <&clks CLPS711X_CLK_BUS>;
+			syscon = <&syscon1>;
 			status = "disabled";
 		};
 
@@ -136,7 +135,7 @@
 			#pwm-cells = <1>;
 		};
 
-		uart1: uart@80000480 {
+		uart1: serial@80000480 {
 			compatible = "cirrus,ep7209-uart";
 			reg = <0x80000480 0x80>;
 			interrupts = <12 13>;
@@ -151,6 +150,7 @@
 			reg = <0x80000500 0x4>;
 			interrupts = <15>;
 			clocks = <&clks CLPS711X_CLK_SPI>;
+			syscon = <&syscon3>;
 			status = "disabled";
 		};
 
@@ -159,7 +159,7 @@
 			reg = <0x80001100 0x80>;
 		};
 
-		uart2: uart@80001480 {
+		uart2: serial@80001480 {
 			compatible = "cirrus,ep7209-uart";
 			reg = <0x80001480 0x80>;
 			interrupts = <28 29>;
@@ -174,6 +174,7 @@
 			clocks = <&clks CLPS711X_CLK_PLL>;
 			clock-names = "pll";
 			interrupts = <32>;
+			syscon = <&syscon3>;
 			status = "disabled";
 		};
 
@@ -183,8 +184,17 @@
 		};
 	};
 
+	keypad: keypad {
+		compatible = "cirrus,ep7209-keypad";
+		interrupt-parent = <&intc>;
+		interrupts = <16>;
+		syscon = <&syscon1>;
+		status = "disabled";
+	};
+
 	mctrl: mctrl {
 		compatible = "cirrus,ep7209-mctrl-gpio";
+		gpio,syscon-dev = <&syscon1 0 0>;
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
diff --git a/arch/arm/boot/dts/ep7211-edb7211.dts b/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts
index 9a134ed271eb..0b15ccaa762e 100644
--- a/arch/arm/boot/dts/ep7211-edb7211.dts
+++ b/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts
@@ -1,8 +1,4 @@
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- */
+// SPDX-License-Identifier: GPL-2.0-or-later
 
 #include "ep7211.dtsi"
 #include <dt-bindings/gpio/gpio.h>
@@ -11,7 +7,8 @@
 	model = "Cirrus Logic EP7211 Development Board";
 	compatible = "cirrus,edb7211", "cirrus,ep7211", "cirrus,ep7209";
 
-	memory {
+	memory@c0000000 {
+		device_type = "memory";
 		reg = <0xc0000000 0x02000000>;
 	};
 
@@ -28,12 +25,12 @@
 
 	display: display {
 		model = "320x240x4";
-		native-mode = <&timing0>;
 		bits-per-pixel = <4>;
 		ac-prescale = <17>;
 
 		display-timings {
-			timing0: 320x240 {
+			native-mode = <&timing0>;
+			timing0: timing-320x240 {
 				hactive = <320>;
 				hback-porch = <0>;
 				hfront-porch = <0>;
@@ -49,8 +46,8 @@
 
 	i2c: i2c {
 		compatible = "i2c-gpio";
-		gpios = <&portd 4 GPIO_ACTIVE_HIGH>,
-			<&portd 5 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&portd 4 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&portd 5 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,delay-us = <2>;
 		i2c-gpio,scl-output-only;
 		#address-cells = <1>;
@@ -75,7 +72,7 @@
 };
 
 &bus {
-	flash: nor@00000000 {
+	flash: nor@0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <2>;
@@ -91,7 +88,7 @@
 };
 
 &portd {
-	lcden {
+	lcden-hog {
 		gpio-hog;
 		gpios = <2 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/cirrus/ep7211.dtsi b/arch/arm/boot/dts/cirrus/ep7211.dtsi
new file mode 100644
index 000000000000..32a4e1237145
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/ep7211.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "ep7209.dtsi"
+
+/ {
+	model = "Cirrus Logic EP7211";
+	compatible = "cirrus,ep7211", "cirrus,ep7209";
+};
diff --git a/arch/arm/boot/dts/cirrus/ep93xx-bk3.dts b/arch/arm/boot/dts/cirrus/ep93xx-bk3.dts
new file mode 100644
index 000000000000..40bc9b2a6ba8
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/ep93xx-bk3.dts
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Liebherr controller BK3.1 based on Cirrus EP9302 SoC
+ */
+/dts-v1/;
+#include "ep93xx.dtsi"
+
+/ {
+	model = "Liebherr controller BK3.1";
+	compatible = "liebherr,bk3", "cirrus,ep9301";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/* should be set from ATAGS */
+		reg = <0x00000000 0x02000000>,
+		      <0x000530c0 0x01fdd000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-0 {
+			label = "grled";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+
+		led-1 {
+			label = "rdled";
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_FAULT;
+		};
+	};
+};
+
+&ebi {
+	nand-controller@60000000 {
+		compatible = "technologic,ts7200-nand";
+		reg = <0x60000000 0x8000000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		nand@0 {
+			reg = <0>;
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "System";
+					reg = <0x00000000 0x01e00000>;
+					read-only;
+				};
+
+				partition@1e00000 {
+					label = "Data";
+					reg = <0x01e00000 0x05f20000>;
+				};
+
+				partition@7d20000 {
+					label = "RedBoot";
+					reg = <0x07d20000 0x002e0000>;
+					read-only;
+				};
+			};
+		};
+	};
+};
+
+&eth0 {
+	phy-handle = <&phy0>;
+};
+
+&i2s {
+	dmas = <&dma0 0 1>, <&dma0 0 2>;
+	dma-names = "tx", "rx";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_on_ac97_pins>;
+	status = "okay";
+};
+
+&gpio1 {
+	/* PWM */
+	gpio-ranges = <&syscon 6 163 1>;
+};
+
+&gpio4 {
+	gpio-ranges = <&syscon 0 97 2>;
+	status = "okay";
+};
+
+&gpio6 {
+	gpio-ranges = <&syscon 0 87 2>;
+	status = "okay";
+};
+
+&gpio7 {
+	gpio-ranges = <&syscon 2 199 4>;
+	status = "okay";
+};
+
+&mdio0 {
+	phy0: ethernet-phy@1 {
+		reg = <1>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts b/arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts
new file mode 100644
index 000000000000..312b2be1c638
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+/*
+ * Device Tree file for Cirrus Logic EDB9302 board based on EP9302 SoC
+ */
+/dts-v1/;
+#include "ep93xx.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "cirrus,edb9302", "cirrus,ep9301";
+	model = "cirrus,edb9302";
+
+	chosen {
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/* should be set from ATAGS */
+		reg = <0x0000000 0x800000>,
+		      <0x1000000 0x800000>,
+		      <0x4000000 0x800000>,
+		      <0x5000000 0x800000>;
+	};
+
+	sound {
+		compatible = "audio-graph-card2";
+		label = "EDB93XX";
+		links = <&i2s_port>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-0 {
+			label = "grled";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+
+		led-1 {
+			label = "rdled";
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_FAULT;
+		};
+	};
+};
+
+&adc {
+	status = "okay";
+};
+
+&ebi {
+	flash@60000000 {
+		compatible = "cfi-flash";
+		reg = <0x60000000 0x1000000>;
+		bank-width = <2>;
+	};
+};
+
+&eth0 {
+	phy-handle = <&phy0>;
+};
+
+&gpio0 {
+	gpio-ranges = <&syscon 0 153 1>,
+		      <&syscon 1 152 1>,
+		      <&syscon 2 151 1>,
+		      <&syscon 3 148 1>,
+		      <&syscon 4 147 1>,
+		      <&syscon 5 146 1>,
+		      <&syscon 6 145 1>,
+		      <&syscon 7 144 1>;
+};
+
+&gpio1 {
+	gpio-ranges = <&syscon 0 143 1>,
+		      <&syscon 1 142 1>,
+		      <&syscon 2 141 1>,
+		      <&syscon 3 140 1>,
+		      <&syscon 4 165 1>,
+		      <&syscon 5 164 1>,
+		      <&syscon 6 163 1>,
+		      <&syscon 7 160 1>;
+};
+
+&gpio2 {
+	gpio-ranges = <&syscon 0 115 1>;
+};
+
+/* edb9302 doesn't have GPIO Port D present */
+&gpio3 {
+	status = "disabled";
+};
+
+&gpio4 {
+	gpio-ranges = <&syscon 0 97 2>;
+};
+
+&gpio5 {
+	gpio-ranges = <&syscon 1 170 1>,
+		      <&syscon 2 169 1>,
+		      <&syscon 3 168 1>;
+};
+
+&gpio6 {
+	gpio-ranges = <&syscon 0 87 2>;
+};
+
+&gpio7 {
+	gpio-ranges = <&syscon 2 199 4>;
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_on_ac97_pins>;
+	status = "okay";
+	i2s_port: port {
+		i2s_ep: endpoint {
+			system-clock-direction-out;
+			frame-master;
+			bitclock-master;
+			mclk-fs = <256>;
+			dai-format = "i2s";
+			convert-channels = <2>;
+			convert-sample-format = "s32_le";
+			remote-endpoint = <&codec_ep>;
+		};
+	};
+};
+
+&mdio0 {
+	phy0: ethernet-phy@1 {
+		reg = <1>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&spi0 {
+	cs-gpios = <&gpio0 6 GPIO_ACTIVE_LOW
+		    &gpio0 7 GPIO_ACTIVE_LOW>;
+	dmas = <&dma1 10 2>, <&dma1 10 1>;
+	dma-names = "rx", "tx";
+	status = "okay";
+
+	cs4271: codec@0 {
+		compatible = "cirrus,cs4271";
+		reg = <0>;
+		#sound-dai-cells = <0>;
+		spi-max-frequency = <6000000>;
+		spi-cpol;
+		spi-cpha;
+		reset-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		port {
+			codec_ep: endpoint {
+				remote-endpoint = <&i2s_ep>;
+			};
+		};
+	};
+
+	at25f1024: eeprom@1 {
+		compatible = "atmel,at25";
+		reg = <1>;
+		address-width = <8>;
+		size = <0x20000>;
+		pagesize = <256>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts b/arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts
new file mode 100644
index 000000000000..9e03f93d9fc8
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Technologic Systems ts7250 board based on Cirrus EP9302 SoC
+ */
+/dts-v1/;
+#include "ep93xx.dtsi"
+
+/ {
+	compatible = "technologic,ts7250", "cirrus,ep9301";
+	model = "TS-7250 SBC";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/* should be set from ATAGS */
+		reg = <0x00000000 0x02000000>,
+		      <0x000530c0 0x01fdd000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-0 {
+			label = "grled";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+
+		led-1 {
+			label = "rdled";
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_FAULT;
+		};
+	};
+};
+
+&ebi {
+	nand-controller@60000000 {
+		compatible = "technologic,ts7200-nand";
+		reg = <0x60000000 0x8000000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		nand@0 {
+			reg = <0>;
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "TS-BOOTROM";
+					reg = <0x00000000 0x00020000>;
+					read-only;
+				};
+
+				partition@20000 {
+					label = "Linux";
+					reg = <0x00020000 0x07d00000>;
+				};
+
+				partition@7d20000 {
+					label = "RedBoot";
+					reg = <0x07d20000 0x002e0000>;
+					read-only;
+				};
+			};
+		};
+	};
+
+	rtc@10800000 {
+		compatible = "st,m48t86";
+		reg = <0x10800000 0x1>,
+			<0x11700000 0x1>;
+	};
+
+	watchdog@23800000 {
+		compatible = "technologic,ts7200-wdt";
+		reg = <0x23800000 0x01>,
+			<0x23c00000 0x01>;
+		timeout-sec = <30>;
+	};
+};
+
+&eth0 {
+	phy-handle = <&phy0>;
+};
+
+&gpio1 {
+	/* PWM */
+	gpio-ranges = <&syscon 6 163 1>;
+};
+
+/* ts7250 doesn't have GPIO Port D present */
+&gpio3 {
+	status = "disabled";
+};
+
+&gpio4 {
+	gpio-ranges = <&syscon 0 97 2>;
+};
+
+&gpio6 {
+	gpio-ranges = <&syscon 0 87 2>;
+};
+
+&gpio7 {
+	gpio-ranges = <&syscon 2 199 4>;
+};
+
+&spi0 {
+	cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+	dmas = <&dma1 10 2>, <&dma1 10 1>;
+	dma-names = "rx", "tx";
+	status = "okay";
+
+	tmp122: temperature-sensor@0 {
+		compatible = "ti,tmp122";
+		reg = <0>;
+		spi-max-frequency = <2000000>;
+	};
+};
+
+&mdio0 {
+	phy0: ethernet-phy@1 {
+		reg = <1>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/cirrus/ep93xx.dtsi b/arch/arm/boot/dts/cirrus/ep93xx.dtsi
new file mode 100644
index 000000000000..0dd1eee346ca
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/ep93xx.dtsi
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Cirrus Logic systems EP93XX SoC
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+/ {
+	soc: soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		syscon: syscon@80930000 {
+			compatible = "cirrus,ep9301-syscon", "syscon";
+			reg = <0x80930000 0x1000>;
+
+			#clock-cells = <1>;
+			clocks = <&xtali>;
+
+			spi_default_pins: pins-spi {
+				function = "spi";
+				groups = "ssp";
+			};
+
+			ac97_default_pins: pins-ac97 {
+				function = "ac97";
+				groups = "ac97";
+			};
+
+			i2s_on_ssp_pins: pins-i2sonssp {
+				function = "i2s";
+				groups = "i2s_on_ssp";
+			};
+
+			i2s_on_ac97_pins: pins-i2sonac97 {
+				function = "i2s";
+				groups = "i2s_on_ac97";
+			};
+
+			gpio1_default_pins: pins-gpio1 {
+				function = "gpio";
+				groups = "gpio1agrp";
+			};
+
+			pwm1_default_pins: pins-pwm1 {
+				function = "pwm";
+				groups = "pwm1";
+			};
+
+			gpio2_default_pins: pins-gpio2 {
+				function = "gpio";
+				groups = "gpio2agrp";
+			};
+
+			gpio3_default_pins: pins-gpio3 {
+				function = "gpio";
+				groups = "gpio3agrp";
+			};
+
+			keypad_default_pins: pins-keypad {
+				function = "keypad";
+				groups = "keypadgrp";
+			};
+
+			gpio4_default_pins: pins-gpio4 {
+				function = "gpio";
+				groups = "gpio4agrp";
+			};
+
+			gpio6_default_pins: pins-gpio6 {
+				function = "gpio";
+				groups = "gpio6agrp";
+			};
+
+			gpio7_default_pins: pins-gpio7 {
+				function = "gpio";
+				groups = "gpio7agrp";
+			};
+
+			ide_default_pins: pins-ide {
+				function = "pata";
+				groups = "idegrp";
+			};
+
+			lcd_on_dram0_pins: pins-rasteronsdram0 {
+				function = "lcd";
+				groups = "rasteronsdram0grp";
+			};
+
+			lcd_on_dram3_pins: pins-rasteronsdram3 {
+				function = "lcd";
+				groups = "rasteronsdram3grp";
+			};
+		};
+
+		adc: adc@80900000 {
+			compatible = "cirrus,ep9301-adc";
+			reg = <0x80900000 0x28>;
+			clocks = <&syscon EP93XX_CLK_ADC>;
+			interrupt-parent = <&vic0>;
+			interrupts = <30>;
+			status = "disabled";
+		};
+
+		/*
+		 * The EP93XX expansion bus is a set of up to 7 each up to 16MB
+		 * windows in the 256MB space from 0x50000000 to 0x5fffffff.
+		 * But since we don't require to setup it in any way, we can
+		 * represent it as a simple-bus.
+		 */
+		ebi: bus@80080000 {
+			compatible = "simple-bus";
+			reg = <0x80080000 0x20>;
+			native-endian;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+		};
+
+		dma0: dma-controller@80000000 {
+			compatible = "cirrus,ep9301-dma-m2p";
+			reg = <0x80000000 0x0040>,
+			      <0x80000040 0x0040>,
+			      <0x80000080 0x0040>,
+			      <0x800000c0 0x0040>,
+			      <0x80000240 0x0040>,
+			      <0x80000200 0x0040>,
+			      <0x800002c0 0x0040>,
+			      <0x80000280 0x0040>,
+			      <0x80000340 0x0040>,
+			      <0x80000300 0x0040>;
+			clocks = <&syscon EP93XX_CLK_M2P0>,
+				 <&syscon EP93XX_CLK_M2P1>,
+				 <&syscon EP93XX_CLK_M2P2>,
+				 <&syscon EP93XX_CLK_M2P3>,
+				 <&syscon EP93XX_CLK_M2P4>,
+				 <&syscon EP93XX_CLK_M2P5>,
+				 <&syscon EP93XX_CLK_M2P6>,
+				 <&syscon EP93XX_CLK_M2P7>,
+				 <&syscon EP93XX_CLK_M2P8>,
+				 <&syscon EP93XX_CLK_M2P9>;
+			clock-names = "m2p0", "m2p1",
+				      "m2p2", "m2p3",
+				      "m2p4", "m2p5",
+				      "m2p6", "m2p7",
+				      "m2p8", "m2p9";
+			interrupt-parent = <&vic0>;
+			interrupts = <7>, <8>, <9>, <10>, <11>,
+				<12>, <13>, <14>, <15>, <16>;
+			#dma-cells = <2>;
+		};
+
+		dma1: dma-controller@80000100 {
+			compatible = "cirrus,ep9301-dma-m2m";
+			reg = <0x80000100 0x0040>,
+			      <0x80000140 0x0040>;
+			clocks = <&syscon EP93XX_CLK_M2M0>,
+				 <&syscon EP93XX_CLK_M2M1>;
+			clock-names = "m2m0", "m2m1";
+			interrupt-parent = <&vic0>;
+			interrupts = <17>, <18>;
+			#dma-cells = <2>;
+		};
+
+		eth0: ethernet@80010000 {
+			compatible = "cirrus,ep9301-eth";
+			reg = <0x80010000 0x10000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <7>;
+			mdio0: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gpio0: gpio@80840000 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840000 0x04>,
+			      <0x80840010 0x04>,
+			      <0x80840090 0x1c>;
+			reg-names = "data", "dir", "intr";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&vic1>;
+			interrupts = <27>;
+		};
+
+		gpio1: gpio@80840004 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840004 0x04>,
+			      <0x80840014 0x04>,
+			      <0x808400ac 0x1c>;
+			reg-names = "data", "dir", "intr";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&vic1>;
+			interrupts = <27>;
+		};
+
+		gpio2: gpio@80840008 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840008 0x04>,
+			      <0x80840018 0x04>;
+			reg-names = "data", "dir";
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio2_default_pins>;
+		};
+
+		gpio3: gpio@8084000c {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x8084000c 0x04>,
+			      <0x8084001c 0x04>;
+			reg-names = "data", "dir";
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio3_default_pins>;
+		};
+
+		gpio4: gpio@80840020 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840020 0x04>,
+			      <0x80840024 0x04>;
+			reg-names = "data", "dir";
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio4_default_pins>;
+		};
+
+		gpio5: gpio@80840030 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840030 0x04>,
+			      <0x80840034 0x04>,
+			      <0x8084004c 0x1c>;
+			reg-names = "data", "dir", "intr";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts-extended = <&vic0 19>, <&vic0 20>,
+					      <&vic0 21>, <&vic0 22>,
+					      <&vic1 15>, <&vic1 16>,
+					      <&vic1 17>, <&vic1 18>;
+		};
+
+		gpio6: gpio@80840038 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840038 0x04>,
+			      <0x8084003c 0x04>;
+			reg-names = "data", "dir";
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio6_default_pins>;
+		};
+
+		gpio7: gpio@80840040 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840040 0x04>,
+			      <0x80840044 0x04>;
+			reg-names = "data", "dir";
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio7_default_pins>;
+		};
+
+		i2s: i2s@80820000 {
+			compatible = "cirrus,ep9301-i2s";
+			reg = <0x80820000 0x100>;
+			#sound-dai-cells = <0>;
+			interrupt-parent = <&vic1>;
+			interrupts = <28>;
+			clocks = <&syscon EP93XX_CLK_I2S_MCLK>,
+				 <&syscon EP93XX_CLK_I2S_SCLK>,
+				 <&syscon EP93XX_CLK_I2S_LRCLK>;
+			clock-names = "mclk", "sclk", "lrclk";
+			dmas = <&dma0 0 1>, <&dma0 0 2>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		ide: ide@800a0000 {
+			compatible = "cirrus,ep9312-pata";
+			reg = <0x800a0000 0x38>;
+			interrupt-parent = <&vic1>;
+			interrupts = <8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&ide_default_pins>;
+			status = "disabled";
+		};
+
+		vic0: interrupt-controller@800b0000 {
+			compatible = "arm,pl192-vic";
+			reg = <0x800b0000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			valid-mask = <0x7ffffffc>;
+			valid-wakeup-mask = <0x0>;
+		};
+
+		vic1: interrupt-controller@800c0000 {
+			compatible = "arm,pl192-vic";
+			reg = <0x800c0000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			valid-mask = <0x1fffffff>;
+			valid-wakeup-mask = <0x0>;
+		};
+
+		keypad: keypad@800f0000 {
+			compatible = "cirrus,ep9307-keypad";
+			reg = <0x800f0000 0x0c>;
+			interrupt-parent = <&vic0>;
+			interrupts = <29>;
+			clocks = <&syscon EP93XX_CLK_KEYPAD>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&keypad_default_pins>;
+			linux,keymap =	<KEY_UP>,
+					<KEY_DOWN>,
+					<KEY_VOLUMEDOWN>,
+					<KEY_HOME>,
+					<KEY_RIGHT>,
+					<KEY_LEFT>,
+					<KEY_ENTER>,
+					<KEY_VOLUMEUP>,
+					<KEY_F6>,
+					<KEY_F8>,
+					<KEY_F9>,
+					<KEY_F10>,
+					<KEY_F1>,
+					<KEY_F2>,
+					<KEY_F3>,
+					<KEY_POWER>;
+		};
+
+		pwm0: pwm@80910000 {
+			compatible = "cirrus,ep9301-pwm";
+			reg = <0x80910000 0x10>;
+			clocks = <&syscon EP93XX_CLK_PWM>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@80910020 {
+			compatible = "cirrus,ep9301-pwm";
+			reg = <0x80910020 0x10>;
+			clocks = <&syscon EP93XX_CLK_PWM>;
+			#pwm-cells = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm1_default_pins>;
+			status = "disabled";
+		};
+
+		rtc0: rtc@80920000 {
+			compatible = "cirrus,ep9301-rtc";
+			reg = <0x80920000 0x100>;
+		};
+
+		spi0: spi@808a0000 {
+			compatible = "cirrus,ep9301-spi";
+			reg = <0x808a0000 0x18>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&vic1>;
+			interrupts = <21>;
+			clocks = <&syscon EP93XX_CLK_SPI>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi_default_pins>;
+			status = "disabled";
+		};
+
+		timer: timer@80810000 {
+			compatible = "cirrus,ep9301-timer";
+			reg = <0x80810000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <19>;
+		};
+
+		uart0: serial@808c0000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x808c0000 0x1000>;
+			arm,primecell-periphid = <0x00041010>;
+			clocks = <&syscon EP93XX_CLK_UART1>, <&syscon EP93XX_CLK_UART>;
+			clock-names = "uartclk", "apb_pclk";
+			interrupt-parent = <&vic1>;
+			interrupts = <20>;
+			status = "disabled";
+		};
+
+		uart1: uart@808d0000 {
+			compatible = "arm,primecell";
+			reg = <0x808d0000 0x1000>;
+			arm,primecell-periphid = <0x00041010>;
+			clocks = <&syscon EP93XX_CLK_UART2>, <&syscon EP93XX_CLK_UART>;
+			clock-names = "apb:uart2", "apb_pclk";
+			interrupt-parent = <&vic1>;
+			interrupts = <22>;
+			status = "disabled";
+		};
+
+		uart2: uart@808b0000 {
+			compatible = "arm,primecell";
+			reg = <0x808b0000 0x1000>;
+			arm,primecell-periphid = <0x00041010>;
+			clocks = <&syscon EP93XX_CLK_UART3>, <&syscon EP93XX_CLK_UART>;
+			clock-names = "apb:uart3", "apb_pclk";
+			interrupt-parent = <&vic1>;
+			interrupts = <23>;
+			status = "disabled";
+		};
+
+		usb0: usb@80020000 {
+			compatible = "generic-ohci";
+			reg = <0x80020000 0x10000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <24>;
+			clocks = <&syscon EP93XX_CLK_USB>;
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@80940000 {
+			compatible = "cirrus,ep9301-wdt";
+			reg = <0x80940000 0x08>;
+		};
+	};
+
+	xtali: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <14745600>;
+		clock-output-names = "xtali";
+	};
+};
diff --git a/arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts b/arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts
deleted file mode 100644
index bfde32e37123..000000000000
--- a/arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- *
- * Licensed under GPLv2 or later
- */
-
-/dts-v1/;
-#include "ox820.dtsi"
-
-/ {
-	model = "Cloud Engines PogoPlug Series 3";
-
-	compatible = "cloudengines,pogoplugv3", "oxsemi,ox820";
-
-	chosen {
-		bootargs = "earlyprintk";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		/* 128Mbytes DDR */
-		reg = <0x60000000 0x8000000>;
-	};
-
-	aliases {
-		serial0 = &uart0;
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		blue {
-			label = "pogoplug:blue";
-			gpios = <&gpio0 2 0>;
-			default-state = "keep";
-		};
-
-		orange {
-			label = "pogoplug:orange";
-			gpios = <&gpio1 16 1>;
-			default-state = "keep";
-		};
-
-		green {
-			label = "pogoplug:green";
-			gpios = <&gpio1 17 1>;
-			default-state = "keep";
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart0>;
-};
-
-&nandc {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-
-	nand@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		nand-ecc-mode = "soft";
-		nand-ecc-algo = "hamming";
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x00e00000>;
-			read-only;
-		};
-
-		partition@e00000 {
-			label = "ubi";
-			reg = <0x00e00000 0x07200000>;
-		};
-	};
-};
-
-&etha {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_etha_mdio>;
-};
diff --git a/arch/arm/boot/dts/cnxt/Makefile b/arch/arm/boot/dts/cnxt/Makefile
new file mode 100644
index 000000000000..d49df53f65a1
--- /dev/null
+++ b/arch/arm/boot/dts/cnxt/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_DIGICOLOR) += \
+	cx92755_equinox.dtb
+dtb-$(CONFIG_ARCH_DIGICOLOR) += \
+	cx92755_equinox.dtb
diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cnxt/cx92755.dtsi
index a5a23c376418..227675fbe820 100644
--- a/arch/arm/boot/dts/cx92755.dtsi
+++ b/arch/arm/boot/dts/cnxt/cx92755.dtsi
@@ -44,9 +44,9 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "cnxt,cx92755";
 
 	interrupt-parent = <&intc>;
@@ -107,7 +107,7 @@
 		reg = <0xf00003a0 0x10>;
 	};
 
-	uart0: uart@f0000740 {
+	uart0: serial@f0000740 {
 		compatible = "cnxt,cx92755-usart";
 		reg = <0xf0000740 0x20>;
 		clocks = <&main_clk>;
@@ -115,7 +115,7 @@
 		status = "disabled";
 	};
 
-	uart1: uart@f0000760 {
+	uart1: serial@f0000760 {
 		compatible = "cnxt,cx92755-usart";
 		reg = <0xf0000760 0x20>;
 		clocks = <&main_clk>;
@@ -123,7 +123,7 @@
 		status = "disabled";
 	};
 
-	uart2: uart@f0000780 {
+	uart2: serial@f0000780 {
 		compatible = "cnxt,cx92755-usart";
 		reg = <0xf0000780 0x20>;
 		clocks = <&main_clk>;
diff --git a/arch/arm/boot/dts/cx92755_equinox.dts b/arch/arm/boot/dts/cnxt/cx92755_equinox.dts
index 026f556c8c50..026f556c8c50 100644
--- a/arch/arm/boot/dts/cx92755_equinox.dts
+++ b/arch/arm/boot/dts/cnxt/cx92755_equinox.dts
diff --git a/arch/arm/boot/dts/cros-adc-thermistors.dtsi b/arch/arm/boot/dts/cros-adc-thermistors.dtsi
index ce7fca76b0d6..97e616f7b841 100644
--- a/arch/arm/boot/dts/cros-adc-thermistors.dtsi
+++ b/arch/arm/boot/dts/cros-adc-thermistors.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Thermistor dts fragment for devices that use Thermistors as
  * children of the IIO based ADC.
@@ -6,10 +7,6 @@
  * Exynos5800 based Peach PI.
  *
  * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 
 &adc {
diff --git a/arch/arm/boot/dts/cros-ec-keyboard.dtsi b/arch/arm/boot/dts/cros-ec-keyboard.dtsi
index c0451051777e..55c4744fa7e7 100644
--- a/arch/arm/boot/dts/cros-ec-keyboard.dtsi
+++ b/arch/arm/boot/dts/cros-ec-keyboard.dtsi
@@ -1,110 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Keyboard dts fragment for devices that use cros-ec-keyboard
  *
  * Copyright (c) 2014 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/input/cros-ec-keyboard.h>
 
 &cros_ec {
-	keyboard-controller {
+	keyboard_controller: keyboard-controller {
 		compatible = "google,cros-ec-keyb";
 		keypad,num-rows = <8>;
 		keypad,num-columns = <13>;
 		google,needs-ghost-filter;
 
 		linux,keymap = <
-			MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA)
-			MATRIX_KEY(0x00, 0x02, KEY_F1)
-			MATRIX_KEY(0x00, 0x03, KEY_B)
-			MATRIX_KEY(0x00, 0x04, KEY_F10)
-			MATRIX_KEY(0x00, 0x05, KEY_RO)
-			MATRIX_KEY(0x00, 0x06, KEY_N)
-			MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
-			MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
-
-			MATRIX_KEY(0x01, 0x01, KEY_ESC)
-			MATRIX_KEY(0x01, 0x02, KEY_F4)
-			MATRIX_KEY(0x01, 0x03, KEY_G)
-			MATRIX_KEY(0x01, 0x04, KEY_F7)
-			MATRIX_KEY(0x01, 0x06, KEY_H)
-			MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
-			MATRIX_KEY(0x01, 0x09, KEY_F9)
-			MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
-			MATRIX_KEY(0x01, 0x0c, KEY_HENKAN)
-
-			MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
-			MATRIX_KEY(0x02, 0x01, KEY_TAB)
-			MATRIX_KEY(0x02, 0x02, KEY_F3)
-			MATRIX_KEY(0x02, 0x03, KEY_T)
-			MATRIX_KEY(0x02, 0x04, KEY_F6)
-			MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE)
-			MATRIX_KEY(0x02, 0x06, KEY_Y)
-			MATRIX_KEY(0x02, 0x07, KEY_102ND)
-			MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
-			MATRIX_KEY(0x02, 0x09, KEY_F8)
-			MATRIX_KEY(0x02, 0x0a, KEY_YEN)
-
-			MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
-			MATRIX_KEY(0x03, 0x02, KEY_F2)
-			MATRIX_KEY(0x03, 0x03, KEY_5)
-			MATRIX_KEY(0x03, 0x04, KEY_F5)
-			MATRIX_KEY(0x03, 0x06, KEY_6)
-			MATRIX_KEY(0x03, 0x08, KEY_MINUS)
-			MATRIX_KEY(0x03, 0x09, KEY_F13)
-			MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
-			MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN)
-
-			MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
-			MATRIX_KEY(0x04, 0x01, KEY_A)
-			MATRIX_KEY(0x04, 0x02, KEY_D)
-			MATRIX_KEY(0x04, 0x03, KEY_F)
-			MATRIX_KEY(0x04, 0x04, KEY_S)
-			MATRIX_KEY(0x04, 0x05, KEY_K)
-			MATRIX_KEY(0x04, 0x06, KEY_J)
-			MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON)
-			MATRIX_KEY(0x04, 0x09, KEY_L)
-			MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH)
-			MATRIX_KEY(0x04, 0x0b, KEY_ENTER)
-
-			MATRIX_KEY(0x05, 0x01, KEY_Z)
-			MATRIX_KEY(0x05, 0x02, KEY_C)
-			MATRIX_KEY(0x05, 0x03, KEY_V)
-			MATRIX_KEY(0x05, 0x04, KEY_X)
-			MATRIX_KEY(0x05, 0x05, KEY_COMMA)
-			MATRIX_KEY(0x05, 0x06, KEY_M)
-			MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT)
-			MATRIX_KEY(0x05, 0x08, KEY_SLASH)
-			MATRIX_KEY(0x05, 0x09, KEY_DOT)
-			MATRIX_KEY(0x05, 0x0b, KEY_SPACE)
-
-			MATRIX_KEY(0x06, 0x01, KEY_1)
-			MATRIX_KEY(0x06, 0x02, KEY_3)
-			MATRIX_KEY(0x06, 0x03, KEY_4)
-			MATRIX_KEY(0x06, 0x04, KEY_2)
-			MATRIX_KEY(0x06, 0x05, KEY_8)
-			MATRIX_KEY(0x06, 0x06, KEY_7)
-			MATRIX_KEY(0x06, 0x08, KEY_0)
-			MATRIX_KEY(0x06, 0x09, KEY_9)
-			MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT)
-			MATRIX_KEY(0x06, 0x0b, KEY_DOWN)
-			MATRIX_KEY(0x06, 0x0c, KEY_RIGHT)
-
-			MATRIX_KEY(0x07, 0x01, KEY_Q)
-			MATRIX_KEY(0x07, 0x02, KEY_E)
-			MATRIX_KEY(0x07, 0x03, KEY_R)
-			MATRIX_KEY(0x07, 0x04, KEY_W)
-			MATRIX_KEY(0x07, 0x05, KEY_I)
-			MATRIX_KEY(0x07, 0x06, KEY_U)
-			MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT)
-			MATRIX_KEY(0x07, 0x08, KEY_P)
-			MATRIX_KEY(0x07, 0x09, KEY_O)
-			MATRIX_KEY(0x07, 0x0b, KEY_UP)
-			MATRIX_KEY(0x07, 0x0c, KEY_LEFT)
+			CROS_STD_TOP_ROW_KEYMAP
+			CROS_STD_MAIN_KEYMAP
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts
deleted file mode 100644
index 14dff3e188ed..000000000000
--- a/arch/arm/boot/dts/da850-enbw-cmc.dts
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Device Tree for AM1808 EnBW CMC board
- *
- * Copyright 2012 DENX Software Engineering GmbH
- * Heiko Schocher <hs@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-/dts-v1/;
-#include "da850.dtsi"
-
-/ {
-	compatible = "enbw,cmc", "ti,da850";
-	model = "EnBW CMC";
-
-	soc@1c00000 {
-		serial0: serial@42000 {
-			status = "okay";
-		};
-		serial1: serial@10c000 {
-			status = "okay";
-		};
-		serial2: serial@10d000 {
-			status = "okay";
-		};
-		mdio: mdio@224000 {
-			status = "okay";
-		};
-		eth0: ethernet@220000 {
-			status = "okay";
-		};
-	};
-};
-
-&edma0 {
-	ti,edma-reserved-slot-ranges = <32 50>;
-};
-
-&edma1 {
-	ti,edma-reserved-slot-ranges = <32 90>;
-};
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
deleted file mode 100644
index a423e8ebfb37..000000000000
--- a/arch/arm/boot/dts/da850-evm.dts
+++ /dev/null
@@ -1,325 +0,0 @@
-/*
- * Device Tree for DA850 EVM board
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation, version 2.
- */
-/dts-v1/;
-#include "da850.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	compatible = "ti,da850-evm", "ti,da850";
-	model = "DA850/AM1808/OMAP-L138 EVM";
-
-	soc@1c00000 {
-		pmx_core: pinmux@14120 {
-			status = "okay";
-
-			mcasp0_pins: pinmux_mcasp0_pins {
-				pinctrl-single,bits = <
-					/*
-					 * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR,
-					 * AFSR, AMUTE
-					 */
-					0x00 0x11111111 0xffffffff
-					/* AXR11, AXR12 */
-					0x04 0x00011000 0x000ff000
-				>;
-			};
-			nand_pins: nand_pins {
-				pinctrl-single,bits = <
-					/* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[4], EMA_CS[3] */
-					0x1c 0x10110110  0xf0ff0ff0
-					/*
-					 * EMA_D[0], EMA_D[1], EMA_D[2],
-					 * EMA_D[3], EMA_D[4], EMA_D[5],
-					 * EMA_D[6], EMA_D[7]
-					 */
-					0x24 0x11111111  0xffffffff
-					/* EMA_A[1], EMA_A[2] */
-					0x30 0x01100000  0x0ff00000
-				>;
-			};
-		};
-		serial0: serial@42000 {
-			status = "okay";
-		};
-		serial1: serial@10c000 {
-			status = "okay";
-		};
-		serial2: serial@10d000 {
-			status = "okay";
-		};
-		rtc0: rtc@23000 {
-			status = "okay";
-		};
-		i2c0: i2c@22000 {
-			status = "okay";
-			clock-frequency = <100000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins>;
-
-			tps: tps@48 {
-				reg = <0x48>;
-			};
-			tlv320aic3106: tlv320aic3106@18 {
-				#sound-dai-cells = <0>;
-				compatible = "ti,tlv320aic3106";
-				reg = <0x18>;
-				status = "okay";
-
-				/* Regulators */
-				IOVDD-supply = <&vdcdc2_reg>;
-				/* Derived from VBAT: Baseboard 3.3V / 1.8V */
-				AVDD-supply = <&vbat>;
-				DRVDD-supply = <&vbat>;
-				DVDD-supply = <&vbat>;
-			};
-			tca6416: gpio@20 {
-				compatible = "ti,tca6416";
-				reg = <0x20>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-		};
-		wdt: wdt@21000 {
-			status = "okay";
-		};
-		mmc0: mmc@40000 {
-			max-frequency = <50000000>;
-			bus-width = <4>;
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins>;
-		};
-		spi1: spi@30e000 {
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
-			flash: m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "m25p64";
-				spi-max-frequency = <30000000>;
-				m25p,fast-read;
-				reg = <0>;
-				partition@0 {
-					label = "U-Boot-SPL";
-					reg = <0x00000000 0x00010000>;
-					read-only;
-				};
-				partition@1 {
-					label = "U-Boot";
-					reg = <0x00010000 0x00080000>;
-					read-only;
-				};
-				partition@2 {
-					label = "U-Boot-Env";
-					reg = <0x00090000 0x00010000>;
-					read-only;
-				};
-				partition@3 {
-					label = "Kernel";
-					reg = <0x000a0000 0x00280000>;
-				};
-				partition@4 {
-					label = "Filesystem";
-					reg = <0x00320000 0x00400000>;
-				};
-				partition@5 {
-					label = "MAC-Address";
-					reg = <0x007f0000 0x00010000>;
-					read-only;
-				};
-			};
-		};
-		mdio: mdio@224000 {
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mdio_pins>;
-			bus_freq = <2200000>;
-		};
-		eth0: ethernet@220000 {
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mii_pins>;
-		};
-		gpio: gpio@226000 {
-			status = "okay";
-		};
-	};
-	vbat: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "DA850/OMAP-L138 EVM";
-		simple-audio-card,widgets =
-			"Line", "Line In",
-			"Line", "Line Out";
-		simple-audio-card,routing =
-			"LINE1L", "Line In",
-			"LINE1R", "Line In",
-			"Line Out", "LLOUT",
-			"Line Out", "RLOUT";
-		simple-audio-card,format = "dsp_b";
-		simple-audio-card,bitclock-master = <&link0_codec>;
-		simple-audio-card,frame-master = <&link0_codec>;
-		simple-audio-card,bitclock-inversion;
-
-		simple-audio-card,cpu {
-			sound-dai = <&mcasp0>;
-			system-clock-frequency = <24576000>;
-		};
-
-		link0_codec: simple-audio-card,codec {
-			sound-dai = <&tlv320aic3106>;
-			system-clock-frequency = <24576000>;
-		};
-	};
-};
-
-/include/ "tps6507x.dtsi"
-
-&tps {
-	vdcdc1_2-supply = <&vbat>;
-	vdcdc3-supply = <&vbat>;
-	vldo1_2-supply = <&vbat>;
-
-	regulators {
-		vdcdc1_reg: regulator@0 {
-			regulator-name = "VDCDC1_3.3V";
-			regulator-min-microvolt = <3150000>;
-			regulator-max-microvolt = <3450000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		vdcdc2_reg: regulator@1 {
-			regulator-name = "VDCDC2_3.3V";
-			regulator-min-microvolt = <1710000>;
-			regulator-max-microvolt = <3450000>;
-			regulator-always-on;
-			regulator-boot-on;
-			ti,defdcdc_default = <1>;
-		};
-
-		vdcdc3_reg: regulator@2 {
-			regulator-name = "VDCDC3_1.2V";
-			regulator-min-microvolt = <950000>;
-			regulator-max-microvolt = <1350000>;
-			regulator-always-on;
-			regulator-boot-on;
-			ti,defdcdc_default = <1>;
-		};
-
-		ldo1_reg: regulator@3 {
-			regulator-name = "LDO1_1.8V";
-			regulator-min-microvolt = <1710000>;
-			regulator-max-microvolt = <1890000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			regulator-name = "LDO2_1.2V";
-			regulator-min-microvolt = <1140000>;
-			regulator-max-microvolt = <1320000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
-};
-
-&mcasp0 {
-	#sound-dai-cells = <0>;
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcasp0_pins>;
-
-	op-mode = <0>;          /* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	/* 4 serializer */
-	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-		0 0 0 0
-		0 0 0 0
-		0 0 0 1
-		2 0 0 0
-	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
-&edma0 {
-	ti,edma-reserved-slot-ranges = <32 50>;
-};
-
-&edma1 {
-	ti,edma-reserved-slot-ranges = <32 90>;
-};
-
-&aemif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_pins>;
-	status = "ok";
-	cs3 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		clock-ranges;
-		ranges;
-
-		ti,cs-chipselect = <3>;
-
-		nand@2000000,0 {
-			compatible = "ti,davinci-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0 0x02000000 0x02000000
-			       1 0x00000000 0x00008000>;
-
-			ti,davinci-chipselect = <1>;
-			ti,davinci-mask-ale = <0>;
-			ti,davinci-mask-cle = <0>;
-			ti,davinci-mask-chipsel = <0>;
-			ti,davinci-ecc-mode = "hw";
-			ti,davinci-ecc-bits = <4>;
-			ti,davinci-nand-use-bbt;
-		};
-	};
-};
-
-&vpif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
-	status = "okay";
-
-	/* VPIF capture port */
-	port@0 {
-		vpif_input_ch0: endpoint@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
-
-		vpif_input_ch1: endpoint@1 {
-			reg = <1>;
-			bus-width = <8>;
-			data-shift = <8>;
-		};
-	};
-
-	/* VPIF display port */
-	port@1 {
-		vpif_output_ch0: endpoint {
-			bus-width = <8>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
deleted file mode 100644
index b837fec70eec..000000000000
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ /dev/null
@@ -1,328 +0,0 @@
-/*
- * Copyright (c) 2016 BayLibre, Inc.
- *
- * Licensed under GPLv2.
- */
-/dts-v1/;
-#include "da850.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "DA850/AM1808/OMAP-L138 LCDK";
-	compatible = "ti,da850-lcdk", "ti,da850";
-
-	aliases {
-		serial2 = &serial2;
-		ethernet0 = &eth0;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0xc0000000 0x08000000>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "DA850/OMAP-L138 LCDK";
-		simple-audio-card,widgets =
-			"Line", "Line In",
-			"Line", "Line Out";
-		simple-audio-card,routing =
-			"LINE1L", "Line In",
-			"LINE1R", "Line In",
-			"Line Out", "LLOUT",
-			"Line Out", "RLOUT";
-		simple-audio-card,format = "dsp_b";
-		simple-audio-card,bitclock-master = <&link0_codec>;
-		simple-audio-card,frame-master = <&link0_codec>;
-		simple-audio-card,bitclock-inversion;
-
-		simple-audio-card,cpu {
-			sound-dai = <&mcasp0>;
-			system-clock-frequency = <24576000>;
-		};
-
-		link0_codec: simple-audio-card,codec {
-			sound-dai = <&tlv320aic3106>;
-			system-clock-frequency = <24576000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		user1 {
-			label = "GPIO Key USER1";
-			linux,code = <BTN_0>;
-			gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
-		};
-
-		user2 {
-			label = "GPIO Key USER2";
-			linux,code = <BTN_1>;
-			gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	vga-bridge {
-		compatible = "ti,ths8135";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				vga_bridge_in: endpoint {
-					remote-endpoint = <&lcdc_out_vga>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				vga_bridge_out: endpoint {
-					remote-endpoint = <&vga_con_in>;
-				};
-			};
-		};
-	};
-
-	vga {
-		compatible = "vga-connector";
-
-		ddc-i2c-bus = <&i2c0>;
-
-		port {
-			vga_con_in: endpoint {
-				remote-endpoint = <&vga_bridge_out>;
-			};
-		};
-	};
-};
-
-&pmx_core {
-	status = "okay";
-
-	mcasp0_pins: pinmux_mcasp0_pins {
-		pinctrl-single,bits = <
-			/* AHCLKX AFSX ACLKX */
-			0x00 0x00101010 0x00f0f0f0
-			/* ARX13 ARX14 */
-			0x04 0x00000110 0x00000ff0
-		>;
-	};
-
-	nand_pins: nand_pins {
-		pinctrl-single,bits = <
-			/* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[3] */
-			0x1c 0x10110010  0xf0ff00f0
-			/*
-			 * EMA_D[0], EMA_D[1], EMA_D[2],
-			 * EMA_D[3], EMA_D[4], EMA_D[5],
-			 * EMA_D[6], EMA_D[7]
-			 */
-			0x24 0x11111111  0xffffffff
-			/*
-			 * EMA_D[8],  EMA_D[9],  EMA_D[10],
-			 * EMA_D[11], EMA_D[12], EMA_D[13],
-			 * EMA_D[14], EMA_D[15]
-			 */
-			0x20 0x11111111  0xffffffff
-			/* EMA_A[1], EMA_A[2] */
-			0x30 0x01100000  0x0ff00000
-		>;
-	};
-};
-
-&serial2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&serial2_rxtx_pins>;
-	status = "okay";
-};
-
-&wdt {
-	status = "okay";
-};
-
-&rtc0 {
-	status = "okay";
-};
-
-&gpio {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&mdio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-	bus_freq = <2200000>;
-	status = "okay";
-};
-
-&eth0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mii_pins>;
-	status = "okay";
-};
-
-&mmc0 {
-	max-frequency = <50000000>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
-	cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	tlv320aic3106: tlv320aic3106@18 {
-		#sound-dai-cells = <0>;
-		compatible = "ti,tlv320aic3106";
-		reg = <0x18>;
-		status = "okay";
-	};
-};
-
-&mcasp0 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcasp0_pins>;
-	status = "okay";
-
-	op-mode = <0>;   /* DAVINCI_MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	serial-dir = <   /* 0: INACTIVE, 1: TX, 2: RX */
-		0 0 0 0
-		0 0 0 0
-		0 0 0 0
-		0 1 2 0
-	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&aemif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_pins>;
-	status = "okay";
-	cs3 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		clock-ranges;
-		ranges;
-
-		ti,cs-chipselect = <3>;
-
-		nand@2000000,0 {
-			compatible = "ti,davinci-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0 0x02000000 0x02000000
-			       1 0x00000000 0x00008000>;
-
-			ti,davinci-chipselect = <1>;
-			ti,davinci-mask-ale = <0>;
-			ti,davinci-mask-cle = <0>;
-			ti,davinci-mask-chipsel = <0>;
-
-			ti,davinci-nand-buswidth = <16>;
-			ti,davinci-ecc-mode = "hw";
-			ti,davinci-ecc-bits = <4>;
-			ti,davinci-nand-use-bbt;
-
-			/*
-			 * The OMAP-L132/L138 Bootloader doc SPRAB41E reads:
-			 * "To boot from NAND Flash, the AIS should be written
-			 * to NAND block 1 (NAND block 0 is not used by default)".
-			 * The same doc mentions that for ROM "Silicon Revision 2.1",
-			 * "Updated NAND boot mode to offer boot from block 0 or block 1".
-			 * However the limitaion is left here by default for compatibility
-			 * with older silicon and because it needs new boot pin settings
-			 * not possible in stock LCDK.
-			 */
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					label = "u-boot env";
-					reg = <0 0x020000>;
-				};
-				partition@0x020000 {
-					/* The LCDK defaults to booting from this partition */
-					label = "u-boot";
-					reg = <0x020000 0x080000>;
-				};
-				partition@0x0a0000 {
-					label = "free space";
-					reg = <0x0a0000 0>;
-				};
-			};
-		};
-	};
-};
-
-&prictrl {
-	status = "okay";
-};
-
-&memctrl {
-	status = "okay";
-};
-
-&lcdc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcd_pins>;
-
-	port {
-		lcdc_out_vga: endpoint {
-			remote-endpoint = <&vga_bridge_in>;
-		};
-	};
-};
-
-&vpif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&vpif_capture_pins>;
-	status = "okay";
-
-	/* VPIF capture port */
-	port {
-		vpif_ch0: endpoint {
-			  bus-width = <8>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
deleted file mode 100644
index 45983c04a8a7..000000000000
--- a/arch/arm/boot/dts/da850-lego-ev3.dts
+++ /dev/null
@@ -1,386 +0,0 @@
-/*
- * Device tree for LEGO MINDSTORMS EV3
- *
- * Copyright (C) 2017 David Lechner <david@lechnology.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation, version 2.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/pwm/pwm.h>
-
-#include "da850.dtsi"
-
-/ {
-	compatible = "lego,ev3", "ti,da850";
-	model = "LEGO MINDSTORMS EV3";
-
-	aliases {
-		serial1 = &serial1;
-	};
-
-	memory@c0000000 {
-		device_type = "memory";
-		reg = <0xc0000000 0x04000000>;
-	};
-
-	/*
-	 * The buttons on the EV3 are mapped to keyboard keys.
-	 */
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		label = "EV3 Brick Buttons";
-		pinctrl-names = "default";
-		pinctrl-0 = <&button_pins>, <&button_bias>;
-
-		center {
-			label = "Center";
-			linux,code = <KEY_ENTER>;
-			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-		};
-
-		left {
-			label = "Left";
-			linux,code = <KEY_LEFT>;
-			gpios = <&gpio 102 GPIO_ACTIVE_HIGH>;
-		};
-
-		back {
-			label = "Back";
-			linux,code = <KEY_BACKSPACE>;
-			gpios = <&gpio 106 GPIO_ACTIVE_HIGH>;
-		};
-
-		right {
-			label = "Right";
-			linux,code = <KEY_RIGHT>;
-			gpios = <&gpio 124 GPIO_ACTIVE_HIGH>;
-		};
-
-		down {
-			label = "Down";
-			linux,code = <KEY_DOWN>;
-			gpios = <&gpio 126 GPIO_ACTIVE_HIGH>;
-		};
-
-		up {
-			label = "Up";
-			linux,code = <KEY_UP>;
-			gpios = <&gpio 127 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	/*
-	 * The EV3 has two built-in bi-color LEDs behind the buttons.
-	 */
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		left_green {
-			label = "led0:green:brick-status";
-			/* GP6[13] */
-			gpios = <&gpio 103 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		right_red {
-			label = "led1:red:brick-status";
-			/* GP6[7] */
-			gpios = <&gpio 108 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		left_red {
-			label = "led0:red:brick-status";
-			/* GP6[12] */
-			gpios = <&gpio 109 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		right_green {
-			label = "led1:green:brick-status";
-			/* GP6[14] */
-			gpios = <&gpio 110 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	/*
-	 * The EV3 is powered down by turning off the main 5V supply.
-	 */
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio 107 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&system_power_pin>;
-	};
-
-	sound {
-		compatible = "pwm-beeper";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ehrpwm0b_pins>;
-		pwms = <&ehrpwm0 1 1000000 0>;
-		amp-supply = <&amp>;
-	};
-
-	/*
-	 * This is a 5V current limiting regulator that is shared by USB,
-	 * the sensor (input) ports, the motor (output) ports and the A/DC.
-	 */
-	vcc5v: regulator1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v_pins>;
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio 101 0>;
-		over-current-gpios = <&gpio 99 GPIO_ACTIVE_LOW>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-
-	/*
-	 * This is a simple voltage divider on VCC5V to provide a 2.5V
-	 * reference signal to the ADC.
-	 */
-	adc_ref: regulator2 {
-		compatible = "regulator-fixed";
-		regulator-name = "adc ref";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-boot-on;
-		vin-supply = <&vcc5v>;
-	};
-
-	/*
-	 * This is the amplifier for the speaker.
-	 */
-	amp: regulator3 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&amp_pins>;
-		compatible = "regulator-fixed";
-		regulator-name = "amp";
-		gpio = <&gpio 111 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	/*
-	 * The EV3 can use 6-AA batteries or a rechargeable Li-ion battery pack.
-	 */
-	battery {
-		pinctrl-names = "default";
-		pintctrl-0 = <&battery_pins>;
-		compatible = "lego,ev3-battery";
-		io-channels = <&adc 4>, <&adc 3>;
-		io-channel-names = "voltage", "current";
-		rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&pmx_core {
-	status = "okay";
-
-	mmc0_cd_pin: pinmux_mmc0_cd {
-		pinctrl-single,bits = <
-			/* GP5[14] */
-			0x2C 0x00000080 0x000000f0
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,bits = <
-			/* GP1[13] */
-			0x8 0x00000800 0x00000f00
-			/* GP6[10] */
-			0x34 0x00800000 0x00f00000
-			/* GP6[6] */
-			0x38 0x00000080 0x000000f0
-			/* GP7[12], GP7[14], GP7[15] */
-			0x40 0x00808800 0x00f0ff00
-		>;
-	};
-
-	led_pins: pinmux_led_pins {
-		pinctrl-single,bits = <
-			/* GP6[12], GP6[13], GP6[14] */
-			0x34 0x00008880 0x0000fff0
-			/* GP6[7] */
-			0x38 0x00000008 0x0000000f
-		>;
-	};
-
-	system_power_pin: pinmux_system_power {
-		pinctrl-single,bits = <
-			/* GP6[11] */
-			0x34 0x00080000 0x000f0000
-		>;
-	};
-
-	vcc5v_pins: pinmux_vcc5v {
-		pinctrl-single,bits = <
-			/* GP6[5] */
-			0x40 0x00000080 0x000000f0
-			/* GP6[3] */
-			0x4c 0x00008000 0x0000f000
-		>;
-	};
-
-	amp_pins: pinmux_amp_pins {
-		pinctrl-single,bits = <
-			/* GP6[15] */
-			0x34 0x00000008 0x0000000f
-		>;
-	};
-
-	battery_pins: pinmux_battery_pins {
-		pinctrl-single,bits = <
-			/* GP0[6] */
-			0x04 0x00000080 0x000000f0
-			/* GP8[8] */
-			0x4c 0x00000080 0x000000f0
-		>;
-	};
-};
-
-&pinconf {
-	status = "okay";
-
-	/* Buttons have external pulldown resistors */
-	button_bias: button-bias-groups {
-		disable {
-			groups = "cp5", "cp24", "cp25", "cp28";
-			bias-disable;
-		};
-	};
-};
-
-/* Input port 1 */
-&serial1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&serial1_rxtx_pins>;
-};
-
-&rtc0 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	/*
-	 * EEPROM contains the first stage bootloader, HW ID and Bluetooth MAC.
-	 */
-	eeprom@50 {
-		compatible = "microchip,24c128";
-		pagesize = <64>;
-		read-only;
-		reg = <0x50>;
-	};
-};
-
-&wdt {
-	status = "okay";
-};
-
-&mmc0 {
-	status = "okay";
-	max-frequency = <50000000>;
-	bus-width = <4>;
-	cd-gpios = <&gpio 94 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin>;
-};
-
-&spi0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>, <&spi0_cs3_pin>;
-
-	flash@0 {
-		compatible = "n25q128a13", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-		ti,spi-wdelay = <8>;
-
-		/* Partitions are based on the official firmware from LEGO */
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0 0x40000>;
-			};
-
-			partition@40000 {
-				label = "U-Boot Env";
-				reg = <0x40000 0x10000>;
-			};
-
-			partition@50000 {
-				label = "Kernel";
-				reg = <0x50000 0x200000>;
-			};
-
-			partition@250000 {
-				label = "Filesystem";
-				reg = <0x250000 0xa50000>;
-			};
-
-			partition@cb0000 {
-				label = "Storage";
-				reg = <0xcb0000 0x2f0000>;
-			};
-		};
-	};
-
-	adc: adc@3 {
-		compatible = "ti,ads7957";
-		reg = <3>;
-		#io-channel-cells = <1>;
-		spi-max-frequency = <10000000>;
-		vref-supply = <&adc_ref>;
-	};
-};
-
-&ehrpwm0 {
-	status = "okay";
-};
-
-&gpio {
-	status = "okay";
-
-	/* Don't pull down battery voltage adc io channel */
-	batt_volt_en {
-		gpio-hog;
-		gpios = <6 GPIO_ACTIVE_HIGH>;
-		output-low;
-	};
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-	vbus-supply = <&vcc5v>;
-};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
deleted file mode 100644
index af68ef7b0caa..000000000000
--- a/arch/arm/boot/dts/da850.dtsi
+++ /dev/null
@@ -1,576 +0,0 @@
-/*
- * Copyright 2012 DENX Software Engineering GmbH
- * Heiko Schocher <hs@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include "skeleton.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	arm {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		intc: interrupt-controller@fffee000 {
-			compatible = "ti,cp-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			ti,intc-size = <101>;
-			reg = <0xfffee000 0x2000>;
-		};
-	};
-	soc@1c00000 {
-		compatible = "simple-bus";
-		model = "da850";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x01c00000 0x400000>;
-		interrupt-parent = <&intc>;
-
-		pmx_core: pinmux@14120 {
-			compatible = "pinctrl-single";
-			reg = <0x14120 0x50>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#pinctrl-cells = <2>;
-			pinctrl-single,bit-per-mux;
-			pinctrl-single,register-width = <32>;
-			pinctrl-single,function-mask = <0xf>;
-			status = "disabled";
-
-			serial0_rtscts_pins: pinmux_serial0_rtscts_pins {
-				pinctrl-single,bits = <
-					/* UART0_RTS UART0_CTS */
-					0x0c 0x22000000 0xff000000
-				>;
-			};
-			serial0_rxtx_pins: pinmux_serial0_rxtx_pins {
-				pinctrl-single,bits = <
-					/* UART0_TXD UART0_RXD */
-					0x0c 0x00220000 0x00ff0000
-				>;
-			};
-			serial1_rtscts_pins: pinmux_serial1_rtscts_pins {
-				pinctrl-single,bits = <
-					/* UART1_CTS UART1_RTS */
-					0x00 0x00440000 0x00ff0000
-				>;
-			};
-			serial1_rxtx_pins: pinmux_serial1_rxtx_pins {
-				pinctrl-single,bits = <
-					/* UART1_TXD UART1_RXD */
-					0x10 0x22000000 0xff000000
-				>;
-			};
-			serial2_rtscts_pins: pinmux_serial2_rtscts_pins {
-				pinctrl-single,bits = <
-					/* UART2_CTS UART2_RTS */
-					0x00 0x44000000 0xff000000
-				>;
-			};
-			serial2_rxtx_pins: pinmux_serial2_rxtx_pins {
-				pinctrl-single,bits = <
-					/* UART2_TXD UART2_RXD */
-					0x10 0x00220000 0x00ff0000
-				>;
-			};
-			i2c0_pins: pinmux_i2c0_pins {
-				pinctrl-single,bits = <
-					/* I2C0_SDA,I2C0_SCL */
-					0x10 0x00002200 0x0000ff00
-				>;
-			};
-			i2c1_pins: pinmux_i2c1_pins {
-				pinctrl-single,bits = <
-					/* I2C1_SDA, I2C1_SCL */
-					0x10 0x00440000 0x00ff0000
-				>;
-			};
-			mmc0_pins: pinmux_mmc_pins {
-				pinctrl-single,bits = <
-					/* MMCSD0_DAT[3] MMCSD0_DAT[2]
-					 * MMCSD0_DAT[1] MMCSD0_DAT[0]
-					 * MMCSD0_CMD    MMCSD0_CLK
-					 */
-					0x28 0x00222222  0x00ffffff
-				>;
-			};
-			ehrpwm0a_pins: pinmux_ehrpwm0a_pins {
-				pinctrl-single,bits = <
-					/* EPWM0A */
-					0xc 0x00000002 0x0000000f
-				>;
-			};
-			ehrpwm0b_pins: pinmux_ehrpwm0b_pins {
-				pinctrl-single,bits = <
-					/* EPWM0B */
-					0xc 0x00000020 0x000000f0
-				>;
-			};
-			ehrpwm1a_pins: pinmux_ehrpwm1a_pins {
-				pinctrl-single,bits = <
-					/* EPWM1A */
-					0x14 0x00000002 0x0000000f
-				>;
-			};
-			ehrpwm1b_pins: pinmux_ehrpwm1b_pins {
-				pinctrl-single,bits = <
-					/* EPWM1B */
-					0x14 0x00000020 0x000000f0
-				>;
-			};
-			ecap0_pins: pinmux_ecap0_pins {
-				pinctrl-single,bits = <
-					/* ECAP0_APWM0 */
-					0x8 0x20000000 0xf0000000
-				>;
-			};
-			ecap1_pins: pinmux_ecap1_pins {
-				pinctrl-single,bits = <
-					/* ECAP1_APWM1 */
-					0x4 0x40000000 0xf0000000
-				>;
-			};
-			ecap2_pins: pinmux_ecap2_pins {
-				pinctrl-single,bits = <
-					/* ECAP2_APWM2 */
-					0x4 0x00000004 0x0000000f
-				>;
-			};
-			spi0_pins: pinmux_spi0_pins {
-				pinctrl-single,bits = <
-					/* SIMO, SOMI, CLK */
-					0xc 0x00001101 0x0000ff0f
-				>;
-			};
-			spi0_cs0_pin: pinmux_spi0_cs0 {
-				pinctrl-single,bits = <
-					/* CS0 */
-					0x10 0x00000010 0x000000f0
-				>;
-			};
-			spi0_cs3_pin: pinmux_spi0_cs3_pin {
-				pinctrl-single,bits = <
-					/* CS3 */
-					0xc 0x01000000 0x0f000000
-				>;
-			};
-			spi1_pins: pinmux_spi1_pins {
-				pinctrl-single,bits = <
-					/* SIMO, SOMI, CLK */
-					0x14 0x00110100 0x00ff0f00
-				>;
-			};
-			spi1_cs0_pin: pinmux_spi1_cs0 {
-				pinctrl-single,bits = <
-					/* CS0 */
-					0x14 0x00000010 0x000000f0
-				>;
-			};
-			mdio_pins: pinmux_mdio_pins {
-				pinctrl-single,bits = <
-					/* MDIO_CLK, MDIO_D */
-					0x10 0x00000088 0x000000ff
-				>;
-			};
-			mii_pins: pinmux_mii_pins {
-				pinctrl-single,bits = <
-					/*
-					 * MII_TXEN, MII_TXCLK, MII_COL
-					 * MII_TXD_3, MII_TXD_2, MII_TXD_1
-					 * MII_TXD_0
-					 */
-					0x8 0x88888880 0xfffffff0
-					/*
-					 * MII_RXER, MII_CRS, MII_RXCLK
-					 * MII_RXDV, MII_RXD_3, MII_RXD_2
-					 * MII_RXD_1, MII_RXD_0
-					 */
-					0xc 0x88888888 0xffffffff
-				>;
-			};
-			lcd_pins: pinmux_lcd_pins {
-				pinctrl-single,bits = <
-					/*
-					 * LCD_D[2], LCD_D[3], LCD_D[4], LCD_D[5],
-					 * LCD_D[6], LCD_D[7]
-					 */
-					0x40 0x22222200 0xffffff00
-					/*
-					 * LCD_D[10], LCD_D[11], LCD_D[12], LCD_D[13],
-					 * LCD_D[14], LCD_D[15], LCD_D[0], LCD_D[1]
-					 */
-					0x44 0x22222222 0xffffffff
-					/* LCD_D[8], LCD_D[9] */
-					0x48 0x00000022 0x000000ff
-
-					/* LCD_PCLK */
-					0x48 0x02000000 0x0f000000
-					/* LCD_AC_ENB_CS, LCD_VSYNC, LCD_HSYNC */
-					0x4c 0x02000022 0x0f0000ff
-				>;
-			};
-			vpif_capture_pins: vpif_capture_pins {
-				pinctrl-single,bits = <
-					/* VP_DIN[2..7], VP_CLKIN1, VP_CLKIN0 */
-					0x38 0x11111111 0xffffffff
-					/* VP_DIN[10..15,0..1] */
-					0x3c 0x11111111 0xffffffff
-					/* VP_DIN[8..9] */
-					0x40 0x00000011 0x000000ff
-				>;
-			};
-			vpif_display_pins: vpif_display_pins {
-				pinctrl-single,bits = <
-					/* VP_DOUT[2..7] */
-					0x40 0x11111100 0xffffff00
-					/* VP_DOUT[10..15,0..1] */
-					0x44 0x11111111 0xffffffff
-					/*  VP_DOUT[8..9] */
-					0x48 0x00000011 0x000000ff
-					/*
-					 * VP_CLKOUT3, VP_CLKIN3,
-					 * VP_CLKOUT2, VP_CLKIN2
-					 */
-					0x4c 0x00111100 0x00ffff00
-				>;
-			};
-		};
-		prictrl: priority-controller@14110 {
-			compatible = "ti,da850-mstpri";
-			reg = <0x14110 0x0c>;
-			status = "disabled";
-		};
-		cfgchip: chip-controller@1417c {
-			compatible = "ti,da830-cfgchip", "syscon", "simple-mfd";
-			reg = <0x1417c 0x14>;
-
-			usb_phy: usb-phy {
-				compatible = "ti,da830-usb-phy";
-				#phy-cells = <1>;
-				status = "disabled";
-			};
-		};
-		edma0: edma@0 {
-			compatible = "ti,edma3-tpcc";
-			/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
-			reg =	<0x0 0x8000>;
-			reg-names = "edma3_cc";
-			interrupts = <11 12>;
-			interrupt-names = "edma3_ccint", "edma3_ccerrint";
-			#dma-cells = <2>;
-
-			ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
-		};
-		edma0_tptc0: tptc@8000 {
-			compatible = "ti,edma3-tptc";
-			reg =	<0x8000 0x400>;
-			interrupts = <13>;
-			interrupt-names = "edm3_tcerrint";
-		};
-		edma0_tptc1: tptc@8400 {
-			compatible = "ti,edma3-tptc";
-			reg =	<0x8400 0x400>;
-			interrupts = <32>;
-			interrupt-names = "edm3_tcerrint";
-		};
-		edma1: edma@230000 {
-			compatible = "ti,edma3-tpcc";
-			/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
-			reg =	<0x230000 0x8000>;
-			reg-names = "edma3_cc";
-			interrupts = <93 94>;
-			interrupt-names = "edma3_ccint", "edma3_ccerrint";
-			#dma-cells = <2>;
-
-			ti,tptcs = <&edma1_tptc0 7>;
-		};
-		edma1_tptc0: tptc@238000 {
-			compatible = "ti,edma3-tptc";
-			reg =	<0x238000 0x400>;
-			interrupts = <95>;
-			interrupt-names = "edm3_tcerrint";
-		};
-		serial0: serial@42000 {
-			compatible = "ti,da830-uart", "ns16550a";
-			reg = <0x42000 0x100>;
-			reg-io-width = <4>;
-			reg-shift = <2>;
-			interrupts = <25>;
-			status = "disabled";
-		};
-		serial1: serial@10c000 {
-			compatible = "ti,da830-uart", "ns16550a";
-			reg = <0x10c000 0x100>;
-			reg-io-width = <4>;
-			reg-shift = <2>;
-			interrupts = <53>;
-			status = "disabled";
-		};
-		serial2: serial@10d000 {
-			compatible = "ti,da830-uart", "ns16550a";
-			reg = <0x10d000 0x100>;
-			reg-io-width = <4>;
-			reg-shift = <2>;
-			interrupts = <61>;
-			status = "disabled";
-		};
-		rtc0: rtc@23000 {
-			compatible = "ti,da830-rtc";
-			reg = <0x23000 0x1000>;
-			interrupts = <19
-				      19>;
-			status = "disabled";
-		};
-		i2c0: i2c@22000 {
-			compatible = "ti,davinci-i2c";
-			reg = <0x22000 0x1000>;
-			interrupts = <15>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-		i2c1: i2c@228000 {
-			compatible = "ti,davinci-i2c";
-			reg = <0x228000 0x1000>;
-			interrupts = <51>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-		wdt: wdt@21000 {
-			compatible = "ti,davinci-wdt";
-			reg = <0x21000 0x1000>;
-			status = "disabled";
-		};
-		mmc0: mmc@40000 {
-			compatible = "ti,da830-mmc";
-			reg = <0x40000 0x1000>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			interrupts = <16>;
-			dmas = <&edma0 16 0>, <&edma0 17 0>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-		vpif: video@217000 {
-			compatible = "ti,da850-vpif";
-			reg = <0x217000 0x1000>;
-			interrupts = <92>;
-			status = "disabled";
-
-			/* VPIF capture port */
-			port@0 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			/* VPIF display port */
-			port@1 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-		mmc1: mmc@21b000 {
-			compatible = "ti,da830-mmc";
-			reg = <0x21b000 0x1000>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			interrupts = <72>;
-			dmas = <&edma1 28 0>, <&edma1 29 0>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-		ehrpwm0: pwm@300000 {
-			compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
-				     "ti,am33xx-ehrpwm";
-			#pwm-cells = <3>;
-			reg = <0x300000 0x2000>;
-			status = "disabled";
-		};
-		ehrpwm1: pwm@302000 {
-			compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
-				     "ti,am33xx-ehrpwm";
-			#pwm-cells = <3>;
-			reg = <0x302000 0x2000>;
-			status = "disabled";
-		};
-		ecap0: ecap@306000 {
-			compatible = "ti,da850-ecap", "ti,am3352-ecap",
-				     "ti,am33xx-ecap";
-			#pwm-cells = <3>;
-			reg = <0x306000 0x80>;
-			status = "disabled";
-		};
-		ecap1: ecap@307000 {
-			compatible = "ti,da850-ecap", "ti,am3352-ecap",
-				     "ti,am33xx-ecap";
-			#pwm-cells = <3>;
-			reg = <0x307000 0x80>;
-			status = "disabled";
-		};
-		ecap2: ecap@308000 {
-			compatible = "ti,da850-ecap", "ti,am3352-ecap",
-				     "ti,am33xx-ecap";
-			#pwm-cells = <3>;
-			reg = <0x308000 0x80>;
-			status = "disabled";
-		};
-		spi0: spi@41000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "ti,da830-spi";
-			reg = <0x41000 0x1000>;
-			num-cs = <6>;
-			ti,davinci-spi-intr-line = <1>;
-			interrupts = <20>;
-			dmas = <&edma0 14 0>, <&edma0 15 0>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-		spi1: spi@30e000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "ti,da830-spi";
-			reg = <0x30e000 0x1000>;
-			num-cs = <4>;
-			ti,davinci-spi-intr-line = <1>;
-			interrupts = <56>;
-			dmas = <&edma0 18 0>, <&edma0 19 0>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-		usb0: usb@200000 {
-			compatible = "ti,da830-musb";
-			reg = <0x200000 0x1000>;
-			ranges;
-			interrupts = <58>;
-			interrupt-names = "mc";
-			dr_mode = "otg";
-			phys = <&usb_phy 0>;
-			phy-names = "usb-phy";
-			status = "disabled";
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			dmas = <&cppi41dma 0 0 &cppi41dma 1 0
-				&cppi41dma 2 0 &cppi41dma 3 0
-				&cppi41dma 0 1 &cppi41dma 1 1
-				&cppi41dma 2 1 &cppi41dma 3 1>;
-			dma-names =
-				"rx1", "rx2", "rx3", "rx4",
-				"tx1", "tx2", "tx3", "tx4";
-
-			cppi41dma: dma-controller@201000 {
-				compatible = "ti,da830-cppi41";
-				reg =  <0x201000 0x1000
-					0x202000 0x1000
-					0x204000 0x4000>;
-				reg-names = "controller",
-					    "scheduler", "queuemgr";
-				interrupts = <58>;
-				#dma-cells = <2>;
-				#dma-channels = <4>;
-				status = "okay";
-			};
-		};
-		sata: sata@218000 {
-			compatible = "ti,da850-ahci";
-			reg = <0x218000 0x2000>, <0x22c018 0x4>;
-			interrupts = <67>;
-			status = "disabled";
-		};
-		mdio: mdio@224000 {
-			compatible = "ti,davinci_mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x224000 0x1000>;
-			status = "disabled";
-		};
-		eth0: ethernet@220000 {
-			compatible = "ti,davinci-dm6467-emac";
-			reg = <0x220000 0x4000>;
-			ti,davinci-ctrl-reg-offset = <0x3000>;
-			ti,davinci-ctrl-mod-reg-offset = <0x2000>;
-			ti,davinci-ctrl-ram-offset = <0>;
-			ti,davinci-ctrl-ram-size = <0x2000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <33
-					34
-					35
-					36
-					>;
-			status = "disabled";
-		};
-		usb1: usb@225000 {
-			compatible = "ti,da830-ohci";
-			reg = <0x225000 0x1000>;
-			interrupts = <59>;
-			phys = <&usb_phy 1>;
-			phy-names = "usb-phy";
-			status = "disabled";
-		};
-		gpio: gpio@226000 {
-			compatible = "ti,dm6441-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0x226000 0x1000>;
-			interrupts = <42 IRQ_TYPE_EDGE_BOTH
-				43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH
-				45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH
-				47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH
-				49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>;
-			ti,ngpio = <144>;
-			ti,davinci-gpio-unbanked = <0>;
-			status = "disabled";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-		pinconf: pin-controller@22c00c {
-			compatible = "ti,da850-pupd";
-			reg = <0x22c00c 0x8>;
-			status = "disabled";
-		};
-
-		mcasp0: mcasp@100000 {
-			compatible = "ti,da830-mcasp-audio";
-			reg = <0x100000 0x2000>,
-			      <0x102000 0x400000>;
-			reg-names = "mpu", "dat";
-			interrupts = <54>;
-			interrupt-names = "common";
-			status = "disabled";
-			dmas = <&edma0 1 1>,
-				<&edma0 0 1>;
-			dma-names = "tx", "rx";
-		};
-
-		lcdc: display@213000 {
-			compatible = "ti,da850-tilcdc";
-			reg = <0x213000 0x1000>;
-			interrupts = <52>;
-			max-pixelclock = <37500>;
-			status = "disabled";
-		};
-	};
-	aemif: aemif@68000000 {
-		compatible = "ti,da850-aemif";
-		#address-cells = <2>;
-		#size-cells = <1>;
-
-		reg = <0x68000000 0x00008000>;
-		ranges = <0 0 0x60000000 0x08000000
-			  1 0 0x68000000 0x00008000>;
-		status = "disabled";
-	};
-	memctrl: memory-controller@b0000000 {
-		compatible = "ti,da850-ddr-controller";
-		reg = <0xb0000000 0xe8>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
deleted file mode 100644
index 9708157f5daf..000000000000
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ /dev/null
@@ -1,578 +0,0 @@
-/*
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/dm814x.h>
-
-/ {
-	compatible = "ti,dm814";
-	interrupt-parent = <&intc>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	chosen { };
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		ethernet0 = &cpsw_emac0;
-		ethernet1 = &cpsw_emac1;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		phy0 = &usb0_phy;
-		phy1 = &usb1_phy;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a8-pmu";
-		interrupts = <3>;
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap3-mpu";
-			ti,hwmods = "mpu";
-		};
-	};
-
-	ocp {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main";
-
-		usb: usb@47400000 {
-			compatible = "ti,am33xx-usb";
-			reg = <0x47400000 0x1000>;
-			ranges;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ti,hwmods = "usb_otg_hs";
-
-			usb0_phy: usb-phy@47401300 {
-				compatible = "ti,am335x-usb-phy";
-				reg = <0x47401300 0x100>;
-				reg-names = "phy";
-				ti,ctrl_mod = <&usb_ctrl_mod>;
-			};
-
-			usb0: usb@47401000 {
-				compatible = "ti,musb-am33xx";
-				reg = <0x47401400 0x400
-				       0x47401000 0x200>;
-				reg-names = "mc", "control";
-
-				interrupts = <18>;
-				interrupt-names = "mc";
-				dr_mode = "otg";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-				phys = <&usb0_phy>;
-
-				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
-					&cppi41dma  2 0 &cppi41dma  3 0
-					&cppi41dma  4 0 &cppi41dma  5 0
-					&cppi41dma  6 0 &cppi41dma  7 0
-					&cppi41dma  8 0 &cppi41dma  9 0
-					&cppi41dma 10 0 &cppi41dma 11 0
-					&cppi41dma 12 0 &cppi41dma 13 0
-					&cppi41dma 14 0 &cppi41dma  0 1
-					&cppi41dma  1 1 &cppi41dma  2 1
-					&cppi41dma  3 1 &cppi41dma  4 1
-					&cppi41dma  5 1 &cppi41dma  6 1
-					&cppi41dma  7 1 &cppi41dma  8 1
-					&cppi41dma  9 1 &cppi41dma 10 1
-					&cppi41dma 11 1 &cppi41dma 12 1
-					&cppi41dma 13 1 &cppi41dma 14 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			usb1: usb@47401800 {
-				compatible = "ti,musb-am33xx";
-				reg = <0x47401c00 0x400
-					0x47401800 0x200>;
-				reg-names = "mc", "control";
-				interrupts = <19>;
-				interrupt-names = "mc";
-				dr_mode = "otg";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-				phys = <&usb1_phy>;
-
-				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
-					&cppi41dma 17 0 &cppi41dma 18 0
-					&cppi41dma 19 0 &cppi41dma 20 0
-					&cppi41dma 21 0 &cppi41dma 22 0
-					&cppi41dma 23 0 &cppi41dma 24 0
-					&cppi41dma 25 0 &cppi41dma 26 0
-					&cppi41dma 27 0 &cppi41dma 28 0
-					&cppi41dma 29 0 &cppi41dma 15 1
-					&cppi41dma 16 1 &cppi41dma 17 1
-					&cppi41dma 18 1 &cppi41dma 19 1
-					&cppi41dma 20 1 &cppi41dma 21 1
-					&cppi41dma 22 1 &cppi41dma 23 1
-					&cppi41dma 24 1 &cppi41dma 25 1
-					&cppi41dma 26 1 &cppi41dma 27 1
-					&cppi41dma 28 1 &cppi41dma 29 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			cppi41dma: dma-controller@47402000 {
-				compatible = "ti,am3359-cppi41";
-				reg =  <0x47400000 0x1000
-					0x47402000 0x1000
-					0x47403000 0x1000
-					0x47404000 0x4000>;
-				reg-names = "glue", "controller", "scheduler", "queuemgr";
-				interrupts = <17>;
-				interrupt-names = "glue";
-				#dma-cells = <2>;
-				#dma-channels = <30>;
-				#dma-requests = <256>;
-			};
-		};
-
-		/*
-		 * See TRM "Table 1-317. L4LS Instance Summary" for hints.
-		 * It shows the module target agent registers though, so the
-		 * actual device is typically 0x1000 before the target agent
-		 * except in cases where the module is larger than 0x1000.
-		 */
-		l4ls: l4ls@48000000 {
-			compatible = "ti,dm814-l4ls", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x48000000 0x2000000>;
-
-			i2c1: i2c@28000 {
-				compatible = "ti,omap4-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,hwmods = "i2c1";
-				reg = <0x28000 0x1000>;
-				interrupts = <70>;
-			};
-
-			elm: elm@80000 {
-				compatible = "ti,814-elm";
-				ti,hwmods = "elm";
-				reg = <0x80000 0x2000>;
-				interrupts = <4>;
-			};
-
-			gpio1: gpio@32000 {
-				compatible = "ti,omap4-gpio";
-				ti,hwmods = "gpio1";
-				ti,gpio-always-on;
-				reg = <0x32000 0x2000>;
-				interrupts = <96>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@4c000 {
-				compatible = "ti,omap4-gpio";
-				ti,hwmods = "gpio2";
-				ti,gpio-always-on;
-				reg = <0x4c000 0x2000>;
-				interrupts = <98>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			i2c2: i2c@2a000 {
-				compatible = "ti,omap4-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,hwmods = "i2c2";
-				reg = <0x2a000 0x1000>;
-				interrupts = <71>;
-			};
-
-			mcspi1: spi@30000 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x30000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <65>;
-				ti,spi-num-cs = <4>;
-				ti,hwmods = "mcspi1";
-				dmas = <&edma 16 0 &edma 17 0
-					&edma 18 0 &edma 19 0>;
-				dma-names = "tx0", "rx0", "tx1", "rx1";
-			};
-
-			timer1: timer@2e000 {
-				compatible = "ti,dm814-timer";
-				reg = <0x2e000 0x2000>;
-				interrupts = <67>;
-				ti,hwmods = "timer1";
-				ti,timer-alwon;
-			};
-
-			uart1: uart@20000 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
-				ti,hwmods = "uart1";
-				reg = <0x20000 0x2000>;
-				clock-frequency = <48000000>;
-				interrupts = <72>;
-				dmas = <&edma 26 0 &edma 27 0>;
-				dma-names = "tx", "rx";
-			};
-
-			uart2: uart@22000 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
-				ti,hwmods = "uart2";
-				reg = <0x22000 0x2000>;
-				clock-frequency = <48000000>;
-				interrupts = <73>;
-				dmas = <&edma 28 0 &edma 29 0>;
-				dma-names = "tx", "rx";
-			};
-
-			uart3: uart@24000 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
-				ti,hwmods = "uart3";
-				reg = <0x24000 0x2000>;
-				clock-frequency = <48000000>;
-				interrupts = <74>;
-				dmas = <&edma 30 0 &edma 31 0>;
-				dma-names = "tx", "rx";
-			};
-
-			timer2: timer@40000 {
-				compatible = "ti,dm814-timer";
-				reg = <0x40000 0x2000>;
-				interrupts = <68>;
-				ti,hwmods = "timer2";
-			};
-
-			timer3: timer@42000 {
-				compatible = "ti,dm814-timer";
-				reg = <0x42000 0x2000>;
-				interrupts = <69>;
-				ti,hwmods = "timer3";
-			};
-
-			mmc1: mmc@60000 {
-				compatible = "ti,omap4-hsmmc";
-				ti,hwmods = "mmc1";
-				dmas = <&edma 24 0
-					&edma 25 0>;
-				dma-names = "tx", "rx";
-				interrupts = <64>;
-				interrupt-parent = <&intc>;
-				reg = <0x60000 0x1000>;
-			};
-
-			rtc: rtc@c0000 {
-				compatible = "ti,am3352-rtc", "ti,da830-rtc";
-				reg = <0xc0000 0x1000>;
-				interrupts = <75 76>;
-				ti,hwmods = "rtc";
-			};
-
-			mmc2: mmc@1d8000 {
-				compatible = "ti,omap4-hsmmc";
-				ti,hwmods = "mmc2";
-				dmas = <&edma 2 0
-					&edma 3 0>;
-				dma-names = "tx", "rx";
-				interrupts = <28>;
-				interrupt-parent = <&intc>;
-				reg = <0x1d8000 0x1000>;
-			};
-
-			control: control@140000 {
-				compatible = "ti,dm814-scm", "simple-bus";
-				reg = <0x140000 0x20000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x140000 0x20000>;
-
-				scm_conf: scm_conf@0 {
-					compatible = "syscon", "simple-bus";
-					reg = <0x0 0x800>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0 0x800>;
-
-					scm_clocks: clocks {
-						#address-cells = <1>;
-						#size-cells = <0>;
-					};
-
-					scm_clockdomains: clockdomains {
-					};
-				};
-
-				usb_ctrl_mod: control@620 {
-					compatible = "ti,am335x-usb-ctrl-module";
-					reg = <0x620 0x10
-						0x648 0x4>;
-					reg-names = "phy_ctrl", "wakeup";
-				};
-
-				edma_xbar: dma-router@f90 {
-					compatible = "ti,am335x-edma-crossbar";
-					reg = <0xf90 0x40>;
-					#dma-cells = <3>;
-					dma-requests = <32>;
-					dma-masters = <&edma>;
-				};
-
-				/*
-				 * Note that silicon revision 2.1 and older
-				 * require input enabled (bit 18 set) for all
-				 * 3.3V I/Os to avoid cumulative hardware damage.
-				 * For more info, see errata advisory 2.1.87.
-				 * We leave bit 18 out of function-mask and rely
-				 * on the bootloader for it.
-				 */
-				pincntl: pinmux@800 {
-					compatible = "pinctrl-single";
-					reg = <0x800 0x438>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#pinctrl-cells = <1>;
-					pinctrl-single,register-width = <32>;
-					pinctrl-single,function-mask = <0x307ff>;
-				};
-
-				usb1_phy: usb-phy@1b00 {
-					compatible = "ti,am335x-usb-phy";
-					reg = <0x1b00 0x100>;
-					reg-names = "phy";
-					ti,ctrl_mod = <&usb_ctrl_mod>;
-				};
-			};
-
-			prcm: prcm@180000 {
-				compatible = "ti,dm814-prcm", "simple-bus";
-				reg = <0x180000 0x2000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x180000 0x2000>;
-
-				prcm_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				prcm_clockdomains: clockdomains {
-				};
-			};
-
-			/* See TRM PLL_SUBSYS_BASE and "PLLSS Registers" */
-			pllss: pllss@1c5000 {
-				compatible = "ti,dm814-pllss", "simple-bus";
-				reg = <0x1c5000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x1c5000 0x1000>;
-
-				pllss_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				pllss_clockdomains: clockdomains {
-				};
-			};
-
-			wdt1: wdt@1c7000 {
-				compatible = "ti,omap3-wdt";
-				ti,hwmods = "wd_timer";
-				reg = <0x1c7000 0x1000>;
-				interrupts = <91>;
-			};
-		};
-
-		intc: interrupt-controller@48200000 {
-			compatible = "ti,dm814-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x48200000 0x1000>;
-		};
-
-		/* Board must configure evtmux with edma_xbar for EDMA */
-		mmc3: mmc@47810000 {
-			compatible = "ti,omap4-hsmmc";
-			ti,hwmods = "mmc3";
-			interrupts = <29>;
-			interrupt-parent = <&intc>;
-			reg = <0x47810000 0x1000>;
-		};
-
-		edma: edma@49000000 {
-			compatible = "ti,edma3-tpcc";
-			ti,hwmods = "tpcc";
-			reg =	<0x49000000 0x10000>;
-			reg-names = "edma3_cc";
-			interrupts = <12 13 14>;
-			interrupt-names = "edma3_ccint", "edma3_mperr",
-					  "edma3_ccerrint";
-			dma-requests = <64>;
-			#dma-cells = <2>;
-
-			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
-				   <&edma_tptc2 3>, <&edma_tptc3 0>;
-
-			ti,edma-memcpy-channels = <20 21>;
-		};
-
-		edma_tptc0: tptc@49800000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc0";
-			reg =	<0x49800000 0x100000>;
-			interrupts = <112>;
-			interrupt-names = "edma3_tcerrint";
-		};
-
-		edma_tptc1: tptc@49900000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc1";
-			reg =	<0x49900000 0x100000>;
-			interrupts = <113>;
-			interrupt-names = "edma3_tcerrint";
-		};
-
-		edma_tptc2: tptc@49a00000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc2";
-			reg =	<0x49a00000 0x100000>;
-			interrupts = <114>;
-			interrupt-names = "edma3_tcerrint";
-		};
-
-		edma_tptc3: tptc@49b00000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc3";
-			reg =	<0x49b00000 0x100000>;
-			interrupts = <115>;
-			interrupt-names = "edma3_tcerrint";
-		};
-
-		/* See TRM "Table 1-318. L4HS Instance Summary" */
-		l4hs: l4hs@4a000000 {
-			compatible = "ti,dm814-l4hs", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x4a000000 0x1b4040>;
-		};
-
-		/* REVISIT: Move to live under l4hs once driver is fixed */
-		mac: ethernet@4a100000 {
-			compatible = "ti,cpsw";
-			ti,hwmods = "cpgmac0";
-			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
-			clock-names = "fck", "cpts";
-			cpdma_channels = <8>;
-			ale_entries = <1024>;
-			bd_ram_size = <0x2000>;
-			mac_control = <0x20>;
-			slaves = <2>;
-			active_slave = <0>;
-			cpts_clock_mult = <0x80000000>;
-			cpts_clock_shift = <29>;
-			reg = <0x4a100000 0x800
-			       0x4a100900 0x100>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			interrupt-parent = <&intc>;
-			/*
-			 * c0_rx_thresh_pend
-			 * c0_rx_pend
-			 * c0_tx_pend
-			 * c0_misc_pend
-			 */
-			interrupts = <40 41 42 43>;
-			ranges;
-			syscon = <&scm_conf>;
-
-			davinci_mdio: mdio@4a100800 {
-				compatible = "ti,davinci_mdio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,hwmods = "davinci_mdio";
-				bus_freq = <1000000>;
-				reg = <0x4a100800 0x100>;
-			};
-
-			cpsw_emac0: slave@4a100200 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			cpsw_emac1: slave@4a100300 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			phy_sel: cpsw-phy-sel@48140650 {
-				compatible = "ti,am3352-cpsw-phy-sel";
-				reg= <0x48140650 0x4>;
-				reg-names = "gmii-sel";
-			};
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,am3352-gpmc";
-			ti,hwmods = "gpmc";
-			ti,no-idle-on-init;
-			reg = <0x50000000 0x2000>;
-			interrupts = <100>;
-			gpmc,num-cs = <7>;
-			gpmc,num-waitpins = <2>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-	};
-};
-
-#include "dm814x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts
deleted file mode 100644
index 1865976db5f9..000000000000
--- a/arch/arm/boot/dts/dm8168-evm.dts
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "dm816x.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "DM8168 EVM";
-	compatible = "ti,dm8168-evm", "ti,dm8168";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000	/* 1 GB */
-		       0xc0000000 0x40000000>;	/* 1 GB */
-	};
-
-	/* FDC6331L controlled by SD_POW pin */
-	vmmcsd_fixed: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	sata_refclk: fixedclock0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-	};
-};
-
-&dm816x_pinmux {
-	mcspi1_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			DM816X_IOPAD(0x0a94, MUX_MODE0)			/* SPI_SCLK */
-			DM816X_IOPAD(0x0a98, MUX_MODE0)			/* SPI_SCS0 */
-			DM816X_IOPAD(0x0aa8, MUX_MODE0)			/* SPI_D0 */
-			DM816X_IOPAD(0x0aac, MUX_MODE0)			/* SPI_D1 */
-		>;
-	};
-
-	mmc_pins: pinmux_mmc_pins {
-		pinctrl-single,pins = <
-			DM816X_IOPAD(0x0a70, MUX_MODE0)			/* SD_POW */
-			DM816X_IOPAD(0x0a74, MUX_MODE0)			/* SD_CLK */
-			DM816X_IOPAD(0x0a78, MUX_MODE0)			/* SD_CMD */
-			DM816X_IOPAD(0x0a7C, MUX_MODE0)			/* SD_DAT0 */
-			DM816X_IOPAD(0x0a80, MUX_MODE0)			/* SD_DAT1 */
-			DM816X_IOPAD(0x0a84, MUX_MODE0)			/* SD_DAT2 */
-			DM816X_IOPAD(0x0a88, MUX_MODE0)			/* SD_DAT2 */
-			DM816X_IOPAD(0x0a8c, MUX_MODE2)			/* GP1[7] */
-			DM816X_IOPAD(0x0a90, MUX_MODE2)			/* GP1[8] */
-		>;
-	};
-
-	usb0_pins: pinmux_usb0_pins {
-		pinctrl-single,pins = <
-			DM816X_IOPAD(0x0d04, MUX_MODE0)			/* USB0_DRVVBUS */
-		>;
-	};
-
-	usb1_pins: pinmux_usb1_pins {
-		pinctrl-single,pins = <
-			DM816X_IOPAD(0x0d08, MUX_MODE0)			/* USB1_DRVVBUS */
-		>;
-	};
-};
-
-&i2c1 {
-	extgpio0: pcf8575@20 {
-		compatible = "nxp,pcf8575";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&i2c2 {
-	extgpio1: pcf8575@20 {
-		compatible = "nxp,pcf8575";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&gpmc {
-	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		linux,mtd-name= "micron,mt29f2g16aadwp";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>; /* termcount */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ti,nand-ecc-opt = "bch8";
-		nand-bus-width = <16>;
-		gpmc,device-width = <2>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		partition@0 {
-			label = "X-Loader";
-			reg = <0 0x80000>;
-		};
-		partition@0x80000 {
-			label = "U-Boot";
-			reg = <0x80000 0x1c0000>;
-		};
-		partition@0x1c0000 {
-			label = "Environment";
-			reg = <0x240000 0x40000>;
-		};
-		partition@0x280000 {
-			label = "Kernel";
-			reg = <0x280000 0x500000>;
-		};
-		partition@0x780000 {
-			label = "Filesystem";
-			reg = <0x780000 0xf880000>;
-		};
-	};
-};
-
-&mcspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
-
-	m25p80@0 {
-		compatible = "w25x32";
-		spi-max-frequency = <48000000>;
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc_pins>;
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
-};
-
-/* At least dm8168-evm rev c won't support multipoint, later may */
-&usb0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_pins>;
-	mentor,multipoint = <0>;
-};
-
-&usb1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins>;
-	mentor,multipoint = <0>;
-};
-
-&sata {
-	clocks = <&sysclk5_ck>, <&sata_refclk>;
-};
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
deleted file mode 100644
index 59cbf958fcc3..000000000000
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ /dev/null
@@ -1,525 +0,0 @@
-/*
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/omap.h>
-
-/ {
-	compatible = "ti,dm816";
-	interrupt-parent = <&intc>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	chosen { };
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		ethernet0 = &eth0;
-		ethernet1 = &eth1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a8-pmu";
-		interrupts = <3>;
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap3-mpu";
-			ti,hwmods = "mpu";
-		};
-	};
-
-	/*
-	 * XXX: Use a flat representation of the dm816x interconnect.
-	 * The real dm816x interconnect network is quite complex. Since
-	 * it will not bring real advantage to represent that in DT
-	 * for the moment, just use a fake OCP bus entry to represent
-	 * the whole bus hierarchy.
-	 */
-	ocp {
-		compatible = "simple-bus";
-		reg = <0x44000000 0x10000>;
-		interrupts = <9 10>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		prcm: prcm@48180000 {
-			compatible = "ti,dm816-prcm";
-			reg = <0x48180000 0x4000>;
-
-			prcm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			prcm_clockdomains: clockdomains {
-			};
-		};
-
-		scrm: scrm@48140000 {
-			compatible = "ti,dm816-scrm", "simple-bus";
-			reg = <0x48140000 0x21000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			#pinctrl-cells = <1>;
-			ranges = <0 0x48140000 0x21000>;
-
-			dm816x_pinmux: pinmux@800 {
-				compatible = "pinctrl-single";
-				reg = <0x800 0x50a>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#pinctrl-cells = <1>;
-				pinctrl-single,register-width = <16>;
-				pinctrl-single,function-mask = <0xf>;
-			};
-
-			/* Device Configuration Registers */
-			scm_conf: syscon@600 {
-				compatible = "syscon", "simple-bus";
-				reg = <0x600 0x110>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x600 0x110>;
-
-				usb_phy0: usb-phy@20 {
-					compatible = "ti,dm8168-usb-phy";
-					reg = <0x20 0x8>;
-					reg-names = "phy";
-					clocks = <&main_fapll 6>;
-					clock-names = "refclk";
-					#phy-cells = <0>;
-					syscon = <&scm_conf>;
-				};
-
-				usb_phy1: usb-phy@28 {
-					compatible = "ti,dm8168-usb-phy";
-					reg = <0x28 0x8>;
-					reg-names = "phy";
-					clocks = <&main_fapll 6>;
-					clock-names = "refclk";
-					#phy-cells = <0>;
-					syscon = <&scm_conf>;
-				};
-			};
-
-			scrm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			scrm_clockdomains: clockdomains {
-			};
-		};
-
-		edma: edma@49000000 {
-			compatible = "ti,edma3";
-			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3";
-			reg =   <0x49000000 0x10000>,
-			        <0x44e10f90 0x40>;
-			interrupts = <12 13 14>;
-			#dma-cells = <1>;
-		};
-
-		elm: elm@48080000 {
-			compatible = "ti,816-elm";
-			ti,hwmods = "elm";
-			reg = <0x48080000 0x2000>;
-			interrupts = <4>;
-		};
-
-		gpio1: gpio@48032000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio1";
-			ti,gpio-always-on;
-			reg = <0x48032000 0x1000>;
-			interrupts = <96>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio2: gpio@4804c000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio2";
-			ti,gpio-always-on;
-			reg = <0x4804c000 0x1000>;
-			interrupts = <98>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,am3352-gpmc";
-			ti,hwmods = "gpmc";
-			reg = <0x50000000 0x2000>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupts = <100>;
-			dmas = <&edma 52>;
-			dma-names = "rxtx";
-			gpmc,num-cs = <6>;
-			gpmc,num-waitpins = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		i2c1: i2c@48028000 {
-			compatible = "ti,omap4-i2c";
-			ti,hwmods = "i2c1";
-			reg = <0x48028000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <70>;
-			dmas = <&edma 58 &edma 59>;
-			dma-names = "tx", "rx";
-		};
-
-		i2c2: i2c@4802a000 {
-			compatible = "ti,omap4-i2c";
-			ti,hwmods = "i2c2";
-			reg = <0x4802a000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <71>;
-			dmas = <&edma 60 &edma 61>;
-			dma-names = "tx", "rx";
-		};
-
-		intc: interrupt-controller@48200000 {
-			compatible = "ti,dm816-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x48200000 0x1000>;
-		};
-
-		rtc: rtc@480c0000 {
-			compatible = "ti,am3352-rtc", "ti,da830-rtc";
-			reg = <0x480c0000 0x1000>;
-			interrupts = <75 76>;
-			ti,hwmods = "rtc";
-		};
-
-		mailbox: mailbox@480c8000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x480c8000 0x2000>;
-			interrupts = <77>;
-			ti,hwmods = "mailbox";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			mbox_dsp: mbox_dsp {
-				ti,mbox-tx = <3 0 0>;
-				ti,mbox-rx = <0 0 0>;
-			};
-		};
-
-		spinbox: spinbox@480ca000 {
-			compatible = "ti,omap4-hwspinlock";
-			reg = <0x480ca000 0x2000>;
-			ti,hwmods = "spinbox";
-			#hwlock-cells = <1>;
-		};
-
-		mdio: mdio@4a100800 {
-			compatible = "ti,davinci_mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x4a100800 0x100>;
-			ti,hwmods = "davinci_mdio";
-			bus_freq = <1000000>;
-			phy0: ethernet-phy@0 {
-				reg = <1>;
-			};
-			phy1: ethernet-phy@1 {
-				reg = <2>;
-			};
-		};
-
-		eth0: ethernet@4a100000 {
-			compatible = "ti,dm816-emac";
-			ti,hwmods = "emac0";
-			reg = <0x4a100000 0x800
-			       0x4a100900 0x3700>;
-			clocks = <&sysclk24_ck>;
-			syscon = <&scm_conf>;
-			ti,davinci-ctrl-reg-offset = <0>;
-			ti,davinci-ctrl-mod-reg-offset = <0x900>;
-			ti,davinci-ctrl-ram-offset = <0x2000>;
-			ti,davinci-ctrl-ram-size = <0x2000>;
-			interrupts = <40 41 42 43>;
-			phy-handle = <&phy0>;
-		};
-
-		eth1: ethernet@4a120000 {
-			compatible = "ti,dm816-emac";
-			ti,hwmods = "emac1";
-			reg = <0x4a120000 0x4000>;
-			clocks = <&sysclk24_ck>;
-			syscon = <&scm_conf>;
-			ti,davinci-ctrl-reg-offset = <0>;
-			ti,davinci-ctrl-mod-reg-offset = <0x900>;
-			ti,davinci-ctrl-ram-offset = <0x2000>;
-			ti,davinci-ctrl-ram-size = <0x2000>;
-			interrupts = <44 45 46 47>;
-			phy-handle = <&phy1>;
-		};
-
-		sata: sata@4a140000 {
-			compatible = "ti,dm816-ahci";
-			reg = <0x4a140000 0x10000>;
-			interrupts = <16>;
-			ti,hwmods = "sata";
-		};
-
-		mcspi1: spi@48030000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x48030000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <65>;
-			ti,spi-num-cs = <4>;
-			ti,hwmods = "mcspi1";
-			dmas = <&edma 16 &edma 17
-				&edma 18 &edma 19
-				&edma 20 &edma 21
-				&edma 22 &edma 23>;
-			dma-names = "tx0", "rx0", "tx1", "rx1",
-				    "tx2", "rx2", "tx3", "rx3";
-		};
-
-		mmc1: mmc@48060000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x48060000 0x11000>;
-			ti,hwmods = "mmc1";
-			interrupts = <64>;
-			dmas = <&edma 24 &edma 25>;
-			dma-names = "tx", "rx";
-		};
-
-		timer1: timer@4802e000 {
-			compatible = "ti,dm816-timer";
-			reg = <0x4802e000 0x2000>;
-			interrupts = <67>;
-			ti,hwmods = "timer1";
-			ti,timer-alwon;
-		};
-
-		timer2: timer@48040000 {
-			compatible = "ti,dm816-timer";
-			reg = <0x48040000 0x2000>;
-			interrupts = <68>;
-			ti,hwmods = "timer2";
-		};
-
-		timer3: timer@48042000 {
-			compatible = "ti,dm816-timer";
-			reg = <0x48042000 0x2000>;
-			interrupts = <69>;
-			ti,hwmods = "timer3";
-		};
-
-		timer4: timer@48044000 {
-			compatible = "ti,dm816-timer";
-			reg = <0x48044000 0x2000>;
-			interrupts = <92>;
-			ti,hwmods = "timer4";
-			ti,timer-pwm;
-		};
-
-		timer5: timer@48046000 {
-			compatible = "ti,dm816-timer";
-			reg = <0x48046000 0x2000>;
-			interrupts = <93>;
-			ti,hwmods = "timer5";
-			ti,timer-pwm;
-		};
-
-		timer6: timer@48048000 {
-			compatible = "ti,dm816-timer";
-			reg = <0x48048000 0x2000>;
-			interrupts = <94>;
-			ti,hwmods = "timer6";
-			ti,timer-pwm;
-		};
-
-		timer7: timer@4804a000 {
-			compatible = "ti,dm816-timer";
-			reg = <0x4804a000 0x2000>;
-			interrupts = <95>;
-			ti,hwmods = "timer7";
-			ti,timer-pwm;
-		};
-
-		uart1: uart@48020000 {
-			compatible = "ti,am3352-uart", "ti,omap3-uart";
-			ti,hwmods = "uart1";
-			reg = <0x48020000 0x2000>;
-			clock-frequency = <48000000>;
-			interrupts = <72>;
-			dmas = <&edma 26 &edma 27>;
-			dma-names = "tx", "rx";
-		};
-
-		uart2: uart@48022000 {
-			compatible = "ti,am3352-uart", "ti,omap3-uart";
-			ti,hwmods = "uart2";
-			reg = <0x48022000 0x2000>;
-			clock-frequency = <48000000>;
-			interrupts = <73>;
-			dmas = <&edma 28 &edma 29>;
-			dma-names = "tx", "rx";
-		};
-
-		uart3: uart@48024000 {
-			compatible = "ti,am3352-uart", "ti,omap3-uart";
-			ti,hwmods = "uart3";
-			reg = <0x48024000 0x2000>;
-			clock-frequency = <48000000>;
-			interrupts = <74>;
-			dmas = <&edma 30 &edma 31>;
-			dma-names = "tx", "rx";
-		};
-
-		/* NOTE: USB needs a transceiver driver for phys to work */
-		usb: usb_otg_hs@47401000 {
-			compatible = "ti,am33xx-usb";
-			reg = <0x47401000 0x400000>;
-			ranges;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ti,hwmods = "usb_otg_hs";
-
-			usb0: usb@47401000 {
-				compatible = "ti,musb-dm816";
-				reg = <0x47401400 0x400
-				       0x47401000 0x200>;
-				reg-names = "mc", "control";
-				interrupts = <18>;
-				interrupt-names = "mc";
-				dr_mode = "host";
-				interface-type = <0>;
-				phys = <&usb_phy0>;
-				phy-names = "usb2-phy";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-
-				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
-					&cppi41dma  2 0 &cppi41dma  3 0
-					&cppi41dma  4 0 &cppi41dma  5 0
-					&cppi41dma  6 0 &cppi41dma  7 0
-					&cppi41dma  8 0 &cppi41dma  9 0
-					&cppi41dma 10 0 &cppi41dma 11 0
-					&cppi41dma 12 0 &cppi41dma 13 0
-					&cppi41dma 14 0 &cppi41dma  0 1
-					&cppi41dma  1 1 &cppi41dma  2 1
-					&cppi41dma  3 1 &cppi41dma  4 1
-					&cppi41dma  5 1 &cppi41dma  6 1
-					&cppi41dma  7 1 &cppi41dma  8 1
-					&cppi41dma  9 1 &cppi41dma 10 1
-					&cppi41dma 11 1 &cppi41dma 12 1
-					&cppi41dma 13 1 &cppi41dma 14 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			usb1: usb@47401800 {
-				compatible = "ti,musb-dm816";
-				reg = <0x47401c00 0x400
-				       0x47401800 0x200>;
-				reg-names = "mc", "control";
-				interrupts = <19>;
-				interrupt-names = "mc";
-				dr_mode = "host";
-				interface-type = <0>;
-				phys = <&usb_phy1>;
-				phy-names = "usb2-phy";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-
-				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
-					&cppi41dma 17 0 &cppi41dma 18 0
-					&cppi41dma 19 0 &cppi41dma 20 0
-					&cppi41dma 21 0 &cppi41dma 22 0
-					&cppi41dma 23 0 &cppi41dma 24 0
-					&cppi41dma 25 0 &cppi41dma 26 0
-					&cppi41dma 27 0 &cppi41dma 28 0
-					&cppi41dma 29 0 &cppi41dma 15 1
-					&cppi41dma 16 1 &cppi41dma 17 1
-					&cppi41dma 18 1 &cppi41dma 19 1
-					&cppi41dma 20 1 &cppi41dma 21 1
-					&cppi41dma 22 1 &cppi41dma 23 1
-					&cppi41dma 24 1 &cppi41dma 25 1
-					&cppi41dma 26 1 &cppi41dma 27 1
-					&cppi41dma 28 1 &cppi41dma 29 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			cppi41dma: dma-controller@47402000 {
-				compatible = "ti,am3359-cppi41";
-				reg =  <0x47400000 0x1000
-					0x47402000 0x1000
-					0x47403000 0x1000
-					0x47404000 0x4000>;
-				reg-names = "glue", "controller", "scheduler", "queuemgr";
-				interrupts = <17>;
-				interrupt-names = "glue";
-				#dma-cells = <2>;
-				#dma-channels = <30>;
-				#dma-requests = <256>;
-			};
-		};
-
-		wd_timer2: wd_timer@480c2000 {
-			compatible = "ti,omap3-wdt";
-			ti,hwmods = "wd_timer";
-			reg = <0x480c2000 0x1000>;
-			interrupts = <0>;
-		};
-	};
-};
-
-#include "dm816x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dove-d3plug.dts b/arch/arm/boot/dts/dove-d3plug.dts
deleted file mode 100644
index f5f59bb5a534..000000000000
--- a/arch/arm/boot/dts/dove-d3plug.dts
+++ /dev/null
@@ -1,103 +0,0 @@
-/dts-v1/;
-
-#include "dove.dtsi"
-
-/ {
-	model = "Globalscale D3Plug";
-	compatible = "globalscale,d3plug", "marvell,dove";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
-		pinctrl-names = "default";
-
-		wlan-act {
-			label = "wlan-act";
-			gpios = <&gpio0 0 1>;
-		};
-
-		wlan-ap {
-			label = "wlan-ap";
-			gpios = <&gpio0 1 1>;
-		};
-
-		status {
-			label = "status";
-			gpios = <&gpio0 2 1>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 8 0>;
-			pinctrl-0 = <&pmx_gpio_8>;
-			pinctrl-names = "default";
-		};
-	};
-};
-
-&uart0 { status = "okay"; };
-&sata0 { status = "okay"; };
-&i2c0 { status = "okay"; };
-
-/* Samsung M8G2F eMMC */
-&sdio0 {
-	status = "okay";
-	non-removable;
-	bus-width = <4>;
-};
-
-/* Marvell SD8787 WLAN/BT */
-&sdio1 {
-	status = "okay";
-	non-removable;
-};
-
-&spi0 {
-	status = "okay";
-
-	/* spi0.0: 2M Flash Macronix MX25L1605D */
-	spi-flash@0 {
-		compatible = "st,m25l1605d";
-		spi-max-frequency = <86000000>;
-		reg = <0>;
-	};
-};
-
-&pcie {
-	status = "okay";
-	/* Fresco Logic USB3.0 xHCI controller */
-	pcie-port@0 {
-		status = "okay";
-		reset-gpios = <&gpio0 26 1>;
-		reset-delay-us = <20000>;
-		pinctrl-0 = <&pmx_camera_gpio>;
-		pinctrl-names = "default";
-	};
-	/* Mini-PCIe slot */
-	pcie-port@1 {
-		status = "okay";
-		reset-gpios = <&gpio0 25 1>;
-	};
-};
diff --git a/arch/arm/boot/dts/dra62x.dtsi b/arch/arm/boot/dts/dra62x.dtsi
deleted file mode 100644
index d3cbb4ea35a8..000000000000
--- a/arch/arm/boot/dts/dra62x.dtsi
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include "dm814x.dtsi"
-
-/ {
-	compatible = "ti,dra62x";
-};
-
-/* Compared to dm814x, dra62x has different offsets for Ethernet */
-&mac {
-	reg = <0x4a100000 0x800
-		0x4a101200 0x100>;
-};
-
-&davinci_mdio {
-	reg = <0x4a101000 0x100>;
-};
-
-#include "dra62x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
deleted file mode 100644
index 1c39a8459b39..000000000000
--- a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Device Tree Source for DRA7x SoC DSPEVE thermal
- *
- * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-dspeve_thermal: dspeve_thermal {
-	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <500>; /* milliseconds */
-
-			/* sensor       ID */
-	thermal-sensors = <&bandgap     3>;
-
-	trips {
-		dspeve_crit: dspeve_crit {
-			temperature = <125000>; /* milliCelsius */
-			hysteresis = <2000>; /* milliCelsius */
-			type = "critical";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
deleted file mode 100644
index f47fc4daf062..000000000000
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ /dev/null
@@ -1,722 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "dra74x.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clk/ti-dra7-atl.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "TI DRA742";
-	compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	evm_3v3_sd: fixedregulator-sd {
-		compatible = "regulator-fixed";
-		regulator-name = "evm_3v3_sd";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
-	};
-
-	evm_3v3_sw: fixedregulator-evm_3v3_sw {
-		compatible = "regulator-fixed";
-		regulator-name = "evm_3v3_sw";
-		vin-supply = <&sysen1>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	aic_dvdd: fixedregulator-aic_dvdd {
-		/* TPS77018DBVT */
-		compatible = "regulator-fixed";
-		regulator-name = "aic_dvdd";
-		vin-supply = <&evm_3v3_sw>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	extcon_usb1: extcon_usb1 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	extcon_usb2: extcon_usb2 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
-	};
-
-	vtt_fixed: fixedregulator-vtt {
-		compatible = "regulator-fixed";
-		regulator-name = "vtt_fixed";
-		regulator-min-microvolt = <1350000>;
-		regulator-max-microvolt = <1350000>;
-		regulator-always-on;
-		regulator-boot-on;
-		enable-active-high;
-		vin-supply = <&sysen2>;
-		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
-	};
-
-	sound0: sound0 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "DRA7xx-EVM";
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack",
-			"Line", "Line Out",
-			"Microphone", "Mic Jack",
-			"Line", "Line In";
-		simple-audio-card,routing =
-			"Headphone Jack",	"HPLOUT",
-			"Headphone Jack",	"HPROUT",
-			"Line Out",		"LLOUT",
-			"Line Out",		"RLOUT",
-			"MIC3L",		"Mic Jack",
-			"MIC3R",		"Mic Jack",
-			"Mic Jack",		"Mic Bias",
-			"LINE1L",		"Line In",
-			"LINE1R",		"Line In";
-		simple-audio-card,format = "dsp_b";
-		simple-audio-card,bitclock-master = <&sound0_master>;
-		simple-audio-card,frame-master = <&sound0_master>;
-		simple-audio-card,bitclock-inversion;
-
-		sound0_master: simple-audio-card,cpu {
-			sound-dai = <&mcasp3>;
-			system-clock-frequency = <5644800>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&tlv320aic3106>;
-			clocks = <&atl_clkin2_ck>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led0 {
-			label = "dra7:usr1";
-			gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led1 {
-			label = "dra7:usr2";
-			gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led2 {
-			label = "dra7:usr3";
-			gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led3 {
-			label = "dra7:usr4";
-			gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
-
-		USER1 {
-			label = "btnUser1";
-			linux,code = <BTN_0>;
-			gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;
-		};
-
-		USER2 {
-			label = "btnUser2";
-			linux,code = <BTN_1>;
-			gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&dra7_pmx_core {
-	dcan1_pins_default: dcan1_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
-			DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
-		>;
-	};
-
-	dcan1_pins_sleep: dcan1_pins_sleep {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
-			DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP)	/* wakeup0.off */
-		>;
-	};
-
-	mmc1_pins_default: mmc1_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
-			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc2_pins_default: mmc2_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
-		>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps659038: tps659038@58 {
-		compatible = "ti,tps659038";
-		reg = <0x58>;
-		ti,palmas-override-powerhold;
-		ti,system-power-controller;
-
-		tps659038_pmic {
-			compatible = "ti,tps659038-pmic";
-
-			regulators {
-				smps123_reg: smps123 {
-					/* VDD_MPU */
-					regulator-name = "smps123";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps45_reg: smps45 {
-					/* VDD_DSPEVE */
-					regulator-name = "smps45";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps6_reg: smps6 {
-					/* VDD_GPU - over VDD_SMPS6 */
-					regulator-name = "smps6";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps7_reg: smps7 {
-					/* CORE_VDD */
-					regulator-name = "smps7";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1150000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps8_reg: smps8 {
-					/* VDD_IVAHD */
-					regulator-name = "smps8";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps9_reg: smps9 {
-					/* VDDS1V8 */
-					regulator-name = "smps9";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo1_reg: ldo1 {
-					/* LDO1_OUT --> SDIO  */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo2_reg: ldo2 {
-					/* VDD_RTCIO */
-					/* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
-					regulator-name = "ldo2";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo3_reg: ldo3 {
-					/* VDDA_1V8_PHY */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo9_reg: ldo9 {
-					/* VDD_RTC */
-					regulator-name = "ldo9";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					regulator-always-on;
-					regulator-boot-on;
-					regulator-allow-bypass;
-				};
-
-				ldoln_reg: ldoln {
-					/* VDDA_1V8_PLL */
-					regulator-name = "ldoln";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldousb_reg: ldousb {
-					/* VDDA_3V_USB: VDDA_USBHS33 */
-					regulator-name = "ldousb";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-				};
-
-				/* REGEN1 is unused */
-
-				regen2: regen2 {
-					/* Needed for PMIC internal resources */
-					regulator-name = "regen2";
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				/* REGEN3 is unused */
-
-				sysen1: sysen1 {
-					/* PMIC_REGEN_3V3 */
-					regulator-name = "sysen1";
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				sysen2: sysen2 {
-					/* PMIC_REGEN_DDR */
-					regulator-name = "sysen2";
-					regulator-boot-on;
-					regulator-always-on;
-				};
-			};
-		};
-	};
-
-	pcf_lcd: gpio@20 {
-		compatible = "ti,pcf8575", "nxp,pcf8575";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	pcf_gpio_21: gpio@21 {
-		compatible = "ti,pcf8575", "nxp,pcf8575";
-		reg = <0x21>;
-		lines-initial-states = <0x1408>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	tlv320aic3106: tlv320aic3106@19 {
-		#sound-dai-cells = <0>;
-		compatible = "ti,tlv320aic3106";
-		reg = <0x19>;
-		adc-settle-ms = <40>;
-		ai3x-micbias-vg = <1>;		/* 2.0V */
-		status = "okay";
-
-		/* Regulators */
-		AVDD-supply = <&evm_3v3_sw>;
-		IOVDD-supply = <&evm_3v3_sw>;
-		DRVDD-supply = <&evm_3v3_sw>;
-		DVDD-supply = <&aic_dvdd>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	pcf_hdmi: gpio@26 {
-		compatible = "ti,pcf8575", "nxp,pcf8575";
-		reg = <0x26>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		p1 {
-			/* vin6_sel_s0: high: VIN6, low: audio */
-			gpio-hog;
-			gpios = <1 GPIO_ACTIVE_HIGH>;
-			output-low;
-			line-name = "vin6_sel_s0";
-		};
-	};
-};
-
-&i2c3 {
-	status = "okay";
-	clock-frequency = <400000>;
-};
-
-&mcspi1 {
-	status = "okay";
-};
-
-&mcspi2 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-	interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-			      <&dra7_pmx_core 0x3e0>;
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&mmc1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_default>;
-	vmmc-supply = <&evm_3v3_sd>;
-	vmmc_aux-supply = <&ldo1_reg>;
-	bus-width = <4>;
-	/*
-	 * SDCD signal is not being used here - using the fact that GPIO mode
-	 * is always hardwired.
-	 */
-	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
-};
-
-&mmc2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins_default>;
-	vmmc-supply = <&evm_3v3_sw>;
-	bus-width = <8>;
-};
-
-&cpu0 {
-	cpu0-supply = <&smps123_reg>;
-};
-
-&qspi {
-	status = "okay";
-
-	spi-max-frequency = <76800000>;
-	m25p80@0 {
-		compatible = "s25fl256s1";
-		spi-max-frequency = <76800000>;
-		reg = <0>;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* MTD partition table.
-		 * The ROM checks the first four physical blocks
-		 * for a valid file to boot and the flash here is
-		 * 64KiB block size.
-		 */
-		partition@0 {
-			label = "QSPI.SPL";
-			reg = <0x00000000 0x000010000>;
-		};
-		partition@1 {
-			label = "QSPI.SPL.backup1";
-			reg = <0x00010000 0x00010000>;
-		};
-		partition@2 {
-			label = "QSPI.SPL.backup2";
-			reg = <0x00020000 0x00010000>;
-		};
-		partition@3 {
-			label = "QSPI.SPL.backup3";
-			reg = <0x00030000 0x00010000>;
-		};
-		partition@4 {
-			label = "QSPI.u-boot";
-			reg = <0x00040000 0x00100000>;
-		};
-		partition@5 {
-			label = "QSPI.u-boot-spl-os";
-			reg = <0x00140000 0x00080000>;
-		};
-		partition@6 {
-			label = "QSPI.u-boot-env";
-			reg = <0x001c0000 0x00010000>;
-		};
-		partition@7 {
-			label = "QSPI.u-boot-env.backup1";
-			reg = <0x001d0000 0x0010000>;
-		};
-		partition@8 {
-			label = "QSPI.kernel";
-			reg = <0x001e0000 0x0800000>;
-		};
-		partition@9 {
-			label = "QSPI.file-system";
-			reg = <0x009e0000 0x01620000>;
-		};
-	};
-};
-
-&omap_dwc3_1 {
-	extcon = <&extcon_usb1>;
-};
-
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
-&usb1 {
-	dr_mode = "otg";
-	extcon = <&extcon_usb1>;
-};
-
-&usb2 {
-	dr_mode = "host";
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	/*
-	* For the existing IOdelay configuration via U-Boot we don't
-	* support NAND on dra7-evm. Keep it disabled. Enabling it
-	* requires a different configuration by U-Boot.
-	*/
-	status = "disabled";
-	ranges = <0 0 0x08000000 0x01000000>;	/* minimum GPMC partition = 16MB */
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>;		/* device IO registers */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>; /* termcount */
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
-		ti,nand-ecc-opt = "bch8";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <16>;
-		gpmc,device-width = <2>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <80>;
-		gpmc,cs-wr-off-ns = <80>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <60>;
-		gpmc,adv-wr-off-ns = <60>;
-		gpmc,we-on-ns = <10>;
-		gpmc,we-off-ns = <50>;
-		gpmc,oe-on-ns = <4>;
-		gpmc,oe-off-ns = <40>;
-		gpmc,access-ns = <40>;
-		gpmc,wr-access-ns = <80>;
-		gpmc,rd-cycle-ns = <80>;
-		gpmc,wr-cycle-ns = <80>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		/* All SPL-* partitions are sized to minimal length
-		 * which can be independently programmable. For
-		 * NAND flash this is equal to size of erase-block */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "NAND.SPL";
-			reg = <0x00000000 0x000020000>;
-		};
-		partition@1 {
-			label = "NAND.SPL.backup1";
-			reg = <0x00020000 0x00020000>;
-		};
-		partition@2 {
-			label = "NAND.SPL.backup2";
-			reg = <0x00040000 0x00020000>;
-		};
-		partition@3 {
-			label = "NAND.SPL.backup3";
-			reg = <0x00060000 0x00020000>;
-		};
-		partition@4 {
-			label = "NAND.u-boot-spl-os";
-			reg = <0x00080000 0x00040000>;
-		};
-		partition@5 {
-			label = "NAND.u-boot";
-			reg = <0x000c0000 0x00100000>;
-		};
-		partition@6 {
-			label = "NAND.u-boot-env";
-			reg = <0x001c0000 0x00020000>;
-		};
-		partition@7 {
-			label = "NAND.u-boot-env.backup1";
-			reg = <0x001e0000 0x00020000>;
-		};
-		partition@8 {
-			label = "NAND.kernel";
-			reg = <0x00200000 0x00800000>;
-		};
-		partition@9 {
-			label = "NAND.file-system";
-			reg = <0x00a00000 0x0f600000>;
-		};
-	};
-};
-
-&usb2_phy1 {
-	phy-supply = <&ldousb_reg>;
-};
-
-&usb2_phy2 {
-	phy-supply = <&ldousb_reg>;
-};
-
-&gpio7 {
-	ti,no-reset-on-init;
-	ti,no-idle-on-init;
-};
-
-&mac {
-	status = "okay";
-	dual_emac;
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <2>;
-	phy-mode = "rgmii";
-	dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <3>;
-	phy-mode = "rgmii";
-	dual_emac_res_vlan = <2>;
-};
-
-&dcan1 {
-	status = "ok";
-	pinctrl-names = "default", "sleep", "active";
-	pinctrl-0 = <&dcan1_pins_sleep>;
-	pinctrl-1 = <&dcan1_pins_sleep>;
-	pinctrl-2 = <&dcan1_pins_default>;
-};
-
-&atl {
-	assigned-clocks = <&abe_dpll_sys_clk_mux>,
-			  <&atl_gfclk_mux>,
-			  <&dpll_abe_ck>,
-			  <&dpll_abe_m2x2_ck>,
-			  <&atl_clkin2_ck>;
-	assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
-	assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
-
-	status = "okay";
-
-	atl2 {
-		bws = <DRA7_ATL_WS_MCASP2_FSX>;
-		aws = <DRA7_ATL_WS_MCASP3_FSX>;
-	};
-};
-
-&mcasp3 {
-	#sound-dai-cells = <0>;
-
-	assigned-clocks = <&mcasp3_ahclkx_mux>;
-	assigned-clock-parents = <&atl_clkin2_ck>;
-
-	status = "okay";
-
-	op-mode = <0>;          /* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	/* 4 serializer */
-	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-		1 2 0 0
-	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
-&mailbox5 {
-	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
-		status = "okay";
-	};
-};
-
-&mailbox6 {
-	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
-		status = "okay";
-	};
-};
diff --git a/arch/arm/boot/dts/dra7-iva-thermal.dtsi b/arch/arm/boot/dts/dra7-iva-thermal.dtsi
deleted file mode 100644
index dd74a5337d1f..000000000000
--- a/arch/arm/boot/dts/dra7-iva-thermal.dtsi
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Device Tree Source for DRA7x SoC IVA thermal
- *
- * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-iva_thermal: iva_thermal {
-	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <500>; /* milliseconds */
-
-			/* sensor       ID */
-	thermal-sensors = <&bandgap     4>;
-
-	trips {
-		iva_crit: iva_crit {
-			temperature = <125000>; /* milliCelsius */
-			hysteresis = <2000>; /* milliCelsius */
-			type = "critical";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
deleted file mode 100644
index 0f0f6f58bd18..000000000000
--- a/arch/arm/boot/dts/dra7.dtsi
+++ /dev/null
@@ -1,2024 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * Based on "omap4.dtsi"
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/dra.h>
-
-#define MAX_SOURCES 400
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	compatible = "ti,dra7xx";
-	interrupt-parent = <&crossbar_mpu>;
-	chosen { };
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		i2c3 = &i2c4;
-		i2c4 = &i2c5;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-		serial6 = &uart7;
-		serial7 = &uart8;
-		serial8 = &uart9;
-		serial9 = &uart10;
-		ethernet0 = &cpsw_emac0;
-		ethernet1 = &cpsw_emac1;
-		d_can0 = &dcan1;
-		d_can1 = &dcan2;
-		spi0 = &qspi;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-		interrupt-parent = <&gic>;
-	};
-
-	gic: interrupt-controller@48211000 {
-		compatible = "arm,cortex-a15-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0x0 0x48211000 0x0 0x1000>,
-		      <0x0 0x48212000 0x0 0x2000>,
-		      <0x0 0x48214000 0x0 0x2000>,
-		      <0x0 0x48216000 0x0 0x2000>;
-		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-		interrupt-parent = <&gic>;
-	};
-
-	wakeupgen: interrupt-controller@48281000 {
-		compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0x0 0x48281000 0x0 0x1000>;
-		interrupt-parent = <&gic>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-
-			operating-points-v2 = <&cpu0_opp_table>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-
-			/* cooling options */
-			cooling-min-level = <0>;
-			cooling-max-level = <2>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-
-	cpu0_opp_table: opp-table {
-		compatible = "operating-points-v2-ti-cpu";
-		syscon = <&scm_wkup>;
-
-		opp_nom-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1060000 850000 1150000>;
-			opp-supported-hw = <0xFF 0x01>;
-			opp-suspend;
-		};
-
-		opp_od-1176000000 {
-			opp-hz = /bits/ 64 <1176000000>;
-			opp-microvolt = <1160000 885000 1160000>;
-			opp-supported-hw = <0xFF 0x02>;
-		};
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap5-mpu";
-			ti,hwmods = "mpu";
-		};
-	};
-
-	/*
-	 * XXX: Use a flat representation of the SOC interconnect.
-	 * The real OMAP interconnect network is quite complex.
-	 * Since it will not bring real advantage to represent that in DT for
-	 * the moment, just use a fake OCP bus entry to represent the whole bus
-	 * hierarchy.
-	 */
-	ocp {
-		compatible = "ti,dra7-l3-noc", "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x0 0x0 0xc0000000>;
-		ti,hwmods = "l3_main_1", "l3_main_2";
-		reg = <0x0 0x44000000 0x0 0x1000000>,
-		      <0x0 0x45000000 0x0 0x1000>;
-		interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-				      <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-
-		l4_cfg: l4@4a000000 {
-			compatible = "ti,dra7-l4-cfg", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x4a000000 0x22c000>;
-
-			scm: scm@2000 {
-				compatible = "ti,dra7-scm-core", "simple-bus";
-				reg = <0x2000 0x2000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x2000 0x2000>;
-
-				scm_conf: scm_conf@0 {
-					compatible = "syscon", "simple-bus";
-					reg = <0x0 0x1400>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x0 0x1400>;
-
-					pbias_regulator: pbias_regulator@e00 {
-						compatible = "ti,pbias-dra7", "ti,pbias-omap";
-						reg = <0xe00 0x4>;
-						syscon = <&scm_conf>;
-						pbias_mmc_reg: pbias_mmc_omap5 {
-							regulator-name = "pbias_mmc_omap5";
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <3000000>;
-						};
-					};
-
-					scm_conf_clocks: clocks {
-						#address-cells = <1>;
-						#size-cells = <0>;
-					};
-				};
-
-				dra7_pmx_core: pinmux@1400 {
-					compatible = "ti,dra7-padconf",
-						     "pinctrl-single";
-					reg = <0x1400 0x0468>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#pinctrl-cells = <1>;
-					#interrupt-cells = <1>;
-					interrupt-controller;
-					pinctrl-single,register-width = <32>;
-					pinctrl-single,function-mask = <0x3fffffff>;
-				};
-
-				scm_conf1: scm_conf@1c04 {
-					compatible = "syscon";
-					reg = <0x1c04 0x0020>;
-				};
-
-				scm_conf_pcie: scm_conf@1c24 {
-					compatible = "syscon";
-					reg = <0x1c24 0x0024>;
-				};
-
-				sdma_xbar: dma-router@b78 {
-					compatible = "ti,dra7-dma-crossbar";
-					reg = <0xb78 0xfc>;
-					#dma-cells = <1>;
-					dma-requests = <205>;
-					ti,dma-safe-map = <0>;
-					dma-masters = <&sdma>;
-				};
-
-				edma_xbar: dma-router@c78 {
-					compatible = "ti,dra7-dma-crossbar";
-					reg = <0xc78 0x7c>;
-					#dma-cells = <2>;
-					dma-requests = <204>;
-					ti,dma-safe-map = <0>;
-					dma-masters = <&edma>;
-				};
-			};
-
-			cm_core_aon: cm_core_aon@5000 {
-				compatible = "ti,dra7-cm-core-aon";
-				reg = <0x5000 0x2000>;
-
-				cm_core_aon_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				cm_core_aon_clockdomains: clockdomains {
-				};
-			};
-
-			cm_core: cm_core@8000 {
-				compatible = "ti,dra7-cm-core";
-				reg = <0x8000 0x3000>;
-
-				cm_core_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				cm_core_clockdomains: clockdomains {
-				};
-			};
-		};
-
-		l4_wkup: l4@4ae00000 {
-			compatible = "ti,dra7-l4-wkup", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x4ae00000 0x3f000>;
-
-			counter32k: counter@4000 {
-				compatible = "ti,omap-counter32k";
-				reg = <0x4000 0x40>;
-				ti,hwmods = "counter_32k";
-			};
-
-			prm: prm@6000 {
-				compatible = "ti,dra7-prm";
-				reg = <0x6000 0x3000>;
-				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-
-				prm_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				prm_clockdomains: clockdomains {
-				};
-			};
-
-			scm_wkup: scm_conf@c000 {
-				compatible = "syscon";
-				reg = <0xc000 0x1000>;
-			};
-		};
-
-		axi@0 {
-			compatible = "simple-bus";
-			#size-cells = <1>;
-			#address-cells = <1>;
-			ranges = <0x51000000 0x51000000 0x3000
-				  0x0	     0x20000000 0x10000000>;
-			pcie1: pcie@51000000 {
-				compatible = "ti,dra7-pcie";
-				reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
-				reg-names = "rc_dbics", "ti_conf", "config";
-				interrupts = <0 232 0x4>, <0 233 0x4>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				device_type = "pci";
-				ranges = <0x81000000 0 0          0x03000 0 0x00010000
-					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
-				bus-range = <0x00 0xff>;
-				#interrupt-cells = <1>;
-				num-lanes = <1>;
-				linux,pci-domain = <0>;
-				ti,hwmods = "pcie1";
-				phys = <&pcie1_phy>;
-				phy-names = "pcie-phy0";
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie1_intc 1>,
-						<0 0 0 2 &pcie1_intc 2>,
-						<0 0 0 3 &pcie1_intc 3>,
-						<0 0 0 4 &pcie1_intc 4>;
-				pcie1_intc: interrupt-controller {
-					interrupt-controller;
-					#address-cells = <0>;
-					#interrupt-cells = <1>;
-				};
-			};
-		};
-
-		axi@1 {
-			compatible = "simple-bus";
-			#size-cells = <1>;
-			#address-cells = <1>;
-			ranges = <0x51800000 0x51800000 0x3000
-				  0x0	     0x30000000 0x10000000>;
-			status = "disabled";
-			pcie@51800000 {
-				compatible = "ti,dra7-pcie";
-				reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
-				reg-names = "rc_dbics", "ti_conf", "config";
-				interrupts = <0 355 0x4>, <0 356 0x4>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				device_type = "pci";
-				ranges = <0x81000000 0 0          0x03000 0 0x00010000
-					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
-				bus-range = <0x00 0xff>;
-				#interrupt-cells = <1>;
-				num-lanes = <1>;
-				linux,pci-domain = <1>;
-				ti,hwmods = "pcie2";
-				phys = <&pcie2_phy>;
-				phy-names = "pcie-phy0";
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie2_intc 1>,
-						<0 0 0 2 &pcie2_intc 2>,
-						<0 0 0 3 &pcie2_intc 3>,
-						<0 0 0 4 &pcie2_intc 4>;
-				pcie2_intc: interrupt-controller {
-					interrupt-controller;
-					#address-cells = <0>;
-					#interrupt-cells = <1>;
-				};
-			};
-		};
-
-		ocmcram1: ocmcram@40300000 {
-			compatible = "mmio-sram";
-			reg = <0x40300000 0x80000>;
-			ranges = <0x0 0x40300000 0x80000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			/*
-			 * This is a placeholder for an optional reserved
-			 * region for use by secure software. The size
-			 * of this region is not known until runtime so it
-			 * is set as zero to either be updated to reserve
-			 * space or left unchanged to leave all SRAM for use.
-			 * On HS parts that that require the reserved region
-			 * either the bootloader can update the size to
-			 * the required amount or the node can be overridden
-			 * from the board dts file for the secure platform.
-			 */
-			sram-hs@0 {
-				compatible = "ti,secure-ram";
-				reg = <0x0 0x0>;
-			};
-		};
-
-		/*
-		 * NOTE: ocmcram2 and ocmcram3 are not available on all
-		 * DRA7xx and AM57xx variants. Confirm availability in
-		 * the data manual for the exact part number in use
-		 * before enabling these nodes in the board dts file.
-		 */
-		ocmcram2: ocmcram@40400000 {
-			status = "disabled";
-			compatible = "mmio-sram";
-			reg = <0x40400000 0x100000>;
-			ranges = <0x0 0x40400000 0x100000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-		};
-
-		ocmcram3: ocmcram@40500000 {
-			status = "disabled";
-			compatible = "mmio-sram";
-			reg = <0x40500000 0x100000>;
-			ranges = <0x0 0x40500000 0x100000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-		};
-
-		bandgap: bandgap@4a0021e0 {
-			reg = <0x4a0021e0 0xc
-				0x4a00232c 0xc
-				0x4a002380 0x2c
-				0x4a0023C0 0x3c
-				0x4a002564 0x8
-				0x4a002574 0x50>;
-				compatible = "ti,dra752-bandgap";
-				interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-				#thermal-sensor-cells = <1>;
-		};
-
-		dsp1_system: dsp_system@40d00000 {
-			compatible = "syscon";
-			reg = <0x40d00000 0x100>;
-		};
-
-		sdma: dma-controller@4a056000 {
-			compatible = "ti,omap4430-sdma";
-			reg = <0x4a056000 0x1000>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			dma-channels = <32>;
-			dma-requests = <127>;
-		};
-
-		edma: edma@43300000 {
-			compatible = "ti,edma3-tpcc";
-			ti,hwmods = "tpcc";
-			reg = <0x43300000 0x100000>;
-			reg-names = "edma3_cc";
-			interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_ccint", "edma3_mperr",
-					  "edma3_ccerrint";
-			dma-requests = <64>;
-			#dma-cells = <2>;
-
-			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
-
-			/*
-			 * memcpy is disabled, can be enabled with:
-			 * ti,edma-memcpy-channels = <20 21>;
-			 * for example. Note that these channels need to be
-			 * masked in the xbar as well.
-			 */
-		};
-
-		edma_tptc0: tptc@43400000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc0";
-			reg =	<0x43400000 0x100000>;
-			interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_tcerrint";
-		};
-
-		edma_tptc1: tptc@43500000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc1";
-			reg =	<0x43500000 0x100000>;
-			interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_tcerrint";
-		};
-
-		gpio1: gpio@4ae10000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4ae10000 0x200>;
-			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio1";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio2: gpio@48055000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48055000 0x200>;
-			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio2";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio3: gpio@48057000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48057000 0x200>;
-			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio3";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio4: gpio@48059000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48059000 0x200>;
-			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio4";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio5: gpio@4805b000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4805b000 0x200>;
-			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio5";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio6: gpio@4805d000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4805d000 0x200>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio6";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio7: gpio@48051000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48051000 0x200>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio7";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio8: gpio@48053000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48053000 0x200>;
-			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio8";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart1: serial@4806a000 {
-			compatible = "ti,dra742-uart", "ti,omap4-uart";
-			reg = <0x4806a000 0x100>;
-			interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart1";
-			clock-frequency = <48000000>;
-			status = "disabled";
-			dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
-			dma-names = "tx", "rx";
-		};
-
-		uart2: serial@4806c000 {
-			compatible = "ti,dra742-uart", "ti,omap4-uart";
-			reg = <0x4806c000 0x100>;
-			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart2";
-			clock-frequency = <48000000>;
-			status = "disabled";
-			dmas = <&sdma_xbar 51>, <&sdma_xbar 52>;
-			dma-names = "tx", "rx";
-		};
-
-		uart3: serial@48020000 {
-			compatible = "ti,dra742-uart", "ti,omap4-uart";
-			reg = <0x48020000 0x100>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart3";
-			clock-frequency = <48000000>;
-			status = "disabled";
-			dmas = <&sdma_xbar 53>, <&sdma_xbar 54>;
-			dma-names = "tx", "rx";
-		};
-
-		uart4: serial@4806e000 {
-			compatible = "ti,dra742-uart", "ti,omap4-uart";
-			reg = <0x4806e000 0x100>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart4";
-			clock-frequency = <48000000>;
-                        status = "disabled";
-			dmas = <&sdma_xbar 55>, <&sdma_xbar 56>;
-			dma-names = "tx", "rx";
-		};
-
-		uart5: serial@48066000 {
-			compatible = "ti,dra742-uart", "ti,omap4-uart";
-			reg = <0x48066000 0x100>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart5";
-			clock-frequency = <48000000>;
-			status = "disabled";
-			dmas = <&sdma_xbar 63>, <&sdma_xbar 64>;
-			dma-names = "tx", "rx";
-		};
-
-		uart6: serial@48068000 {
-			compatible = "ti,dra742-uart", "ti,omap4-uart";
-			reg = <0x48068000 0x100>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart6";
-			clock-frequency = <48000000>;
-			status = "disabled";
-			dmas = <&sdma_xbar 79>, <&sdma_xbar 80>;
-			dma-names = "tx", "rx";
-		};
-
-		uart7: serial@48420000 {
-			compatible = "ti,dra742-uart", "ti,omap4-uart";
-			reg = <0x48420000 0x100>;
-			interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart7";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		uart8: serial@48422000 {
-			compatible = "ti,dra742-uart", "ti,omap4-uart";
-			reg = <0x48422000 0x100>;
-			interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart8";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		uart9: serial@48424000 {
-			compatible = "ti,dra742-uart", "ti,omap4-uart";
-			reg = <0x48424000 0x100>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart9";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		uart10: serial@4ae2b000 {
-			compatible = "ti,dra742-uart", "ti,omap4-uart";
-			reg = <0x4ae2b000 0x100>;
-			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart10";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		mailbox1: mailbox@4a0f4000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4a0f4000 0x200>;
-			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox1";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <3>;
-			ti,mbox-num-fifos = <8>;
-			status = "disabled";
-		};
-
-		mailbox2: mailbox@4883a000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4883a000 0x200>;
-			interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox2";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox3: mailbox@4883c000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4883c000 0x200>;
-			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox3";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox4: mailbox@4883e000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4883e000 0x200>;
-			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox4";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox5: mailbox@48840000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48840000 0x200>;
-			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox5";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox6: mailbox@48842000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48842000 0x200>;
-			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox6";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox7: mailbox@48844000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48844000 0x200>;
-			interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox7";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox8: mailbox@48846000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48846000 0x200>;
-			interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox8";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox9: mailbox@4885e000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4885e000 0x200>;
-			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox9";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox10: mailbox@48860000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48860000 0x200>;
-			interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox10";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox11: mailbox@48862000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48862000 0x200>;
-			interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox11";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox12: mailbox@48864000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48864000 0x200>;
-			interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox12";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox13: mailbox@48802000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48802000 0x200>;
-			interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox13";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		timer1: timer@4ae18000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4ae18000 0x80>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer1";
-			ti,timer-alwon;
-		};
-
-		timer2: timer@48032000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48032000 0x80>;
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer2";
-		};
-
-		timer3: timer@48034000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48034000 0x80>;
-			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer3";
-		};
-
-		timer4: timer@48036000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48036000 0x80>;
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer4";
-		};
-
-		timer5: timer@48820000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48820000 0x80>;
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer5";
-		};
-
-		timer6: timer@48822000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48822000 0x80>;
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer6";
-		};
-
-		timer7: timer@48824000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48824000 0x80>;
-			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer7";
-		};
-
-		timer8: timer@48826000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48826000 0x80>;
-			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer8";
-		};
-
-		timer9: timer@4803e000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4803e000 0x80>;
-			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer9";
-		};
-
-		timer10: timer@48086000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48086000 0x80>;
-			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer10";
-		};
-
-		timer11: timer@48088000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48088000 0x80>;
-			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer11";
-		};
-
-		timer12: timer@4ae20000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4ae20000 0x80>;
-			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer12";
-			ti,timer-alwon;
-			ti,timer-secure;
-		};
-
-		timer13: timer@48828000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48828000 0x80>;
-			interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer13";
-		};
-
-		timer14: timer@4882a000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4882a000 0x80>;
-			interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer14";
-		};
-
-		timer15: timer@4882c000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4882c000 0x80>;
-			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer15";
-		};
-
-		timer16: timer@4882e000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4882e000 0x80>;
-			interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer16";
-		};
-
-		wdt2: wdt@4ae14000 {
-			compatible = "ti,omap3-wdt";
-			reg = <0x4ae14000 0x80>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "wd_timer2";
-		};
-
-		hwspinlock: spinlock@4a0f6000 {
-			compatible = "ti,omap4-hwspinlock";
-			reg = <0x4a0f6000 0x1000>;
-			ti,hwmods = "spinlock";
-			#hwlock-cells = <1>;
-		};
-
-		dmm@4e000000 {
-			compatible = "ti,omap5-dmm";
-			reg = <0x4e000000 0x800>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "dmm";
-		};
-
-		i2c1: i2c@48070000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48070000 0x100>;
-			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c1";
-			status = "disabled";
-		};
-
-		i2c2: i2c@48072000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48072000 0x100>;
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c2";
-			status = "disabled";
-		};
-
-		i2c3: i2c@48060000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48060000 0x100>;
-			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c3";
-			status = "disabled";
-		};
-
-		i2c4: i2c@4807a000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x4807a000 0x100>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c4";
-			status = "disabled";
-		};
-
-		i2c5: i2c@4807c000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x4807c000 0x100>;
-			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c5";
-			status = "disabled";
-		};
-
-		mmc1: mmc@4809c000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x4809c000 0x400>;
-			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			ti,needs-special-reset;
-			dmas = <&sdma_xbar 61>, <&sdma_xbar 62>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-			pbias-supply = <&pbias_mmc_reg>;
-		};
-
-		mmc2: mmc@480b4000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480b4000 0x400>;
-			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc2";
-			ti,needs-special-reset;
-			dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mmc3: mmc@480ad000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480ad000 0x400>;
-			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc3";
-			ti,needs-special-reset;
-			dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mmc4: mmc@480d1000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480d1000 0x400>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc4";
-			ti,needs-special-reset;
-			dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mmu0_dsp1: mmu@40d01000 {
-			compatible = "ti,dra7-dsp-iommu";
-			reg = <0x40d01000 0x100>;
-			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu0_dsp1";
-			#iommu-cells = <0>;
-			ti,syscon-mmuconfig = <&dsp1_system 0x0>;
-			status = "disabled";
-		};
-
-		mmu1_dsp1: mmu@40d02000 {
-			compatible = "ti,dra7-dsp-iommu";
-			reg = <0x40d02000 0x100>;
-			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu1_dsp1";
-			#iommu-cells = <0>;
-			ti,syscon-mmuconfig = <&dsp1_system 0x1>;
-			status = "disabled";
-		};
-
-		mmu_ipu1: mmu@58882000 {
-			compatible = "ti,dra7-iommu";
-			reg = <0x58882000 0x100>;
-			interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_ipu1";
-			#iommu-cells = <0>;
-			ti,iommu-bus-err-back;
-			status = "disabled";
-		};
-
-		mmu_ipu2: mmu@55082000 {
-			compatible = "ti,dra7-iommu";
-			reg = <0x55082000 0x100>;
-			interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_ipu2";
-			#iommu-cells = <0>;
-			ti,iommu-bus-err-back;
-			status = "disabled";
-		};
-
-		abb_mpu: regulator-abb-mpu {
-			compatible = "ti,abb-v3";
-			regulator-name = "abb_mpu";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin1>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
-			      <0x4ae06014 0x4>, <0x4a003b20 0xc>,
-			      <0x4ae0c158 0x4>;
-			reg-names = "setup-address", "control-address",
-				    "int-address", "efuse-address",
-				    "ldo-address";
-			ti,tranxdone-status-mask = <0x80>;
-			/* LDOVBBMPU_FBB_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBMPU_FBB_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1060000		0	0x0	0 0x02000000 0x01F00000
-			1160000		0	0x4	0 0x02000000 0x01F00000
-			1210000		0	0x8	0 0x02000000 0x01F00000
-			>;
-		};
-
-		abb_ivahd: regulator-abb-ivahd {
-			compatible = "ti,abb-v3";
-			regulator-name = "abb_ivahd";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin1>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
-			      <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
-			      <0x4a002470 0x4>;
-			reg-names = "setup-address", "control-address",
-				    "int-address", "efuse-address",
-				    "ldo-address";
-			ti,tranxdone-status-mask = <0x40000000>;
-			/* LDOVBBIVA_FBB_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBIVA_FBB_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1055000		0	0x0	0 0x02000000 0x01F00000
-			1150000		0	0x4	0 0x02000000 0x01F00000
-			1250000		0	0x8	0 0x02000000 0x01F00000
-			>;
-		};
-
-		abb_dspeve: regulator-abb-dspeve {
-			compatible = "ti,abb-v3";
-			regulator-name = "abb_dspeve";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin1>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
-			      <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
-			      <0x4a00246c 0x4>;
-			reg-names = "setup-address", "control-address",
-				    "int-address", "efuse-address",
-				    "ldo-address";
-			ti,tranxdone-status-mask = <0x20000000>;
-			/* LDOVBBDSPEVE_FBB_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBDSPEVE_FBB_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1055000		0	0x0	0 0x02000000 0x01F00000
-			1150000		0	0x4	0 0x02000000 0x01F00000
-			1250000		0	0x8	0 0x02000000 0x01F00000
-			>;
-		};
-
-		abb_gpu: regulator-abb-gpu {
-			compatible = "ti,abb-v3";
-			regulator-name = "abb_gpu";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin1>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
-			      <0x4ae06010 0x4>, <0x4a003b08 0xc>,
-			      <0x4ae0c154 0x4>;
-			reg-names = "setup-address", "control-address",
-				    "int-address", "efuse-address",
-				    "ldo-address";
-			ti,tranxdone-status-mask = <0x10000000>;
-			/* LDOVBBGPU_FBB_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBGPU_FBB_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1090000		0	0x0	0 0x02000000 0x01F00000
-			1210000		0	0x4	0 0x02000000 0x01F00000
-			1280000		0	0x8	0 0x02000000 0x01F00000
-			>;
-		};
-
-		mcspi1: spi@48098000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x48098000 0x200>;
-			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi1";
-			ti,spi-num-cs = <4>;
-			dmas = <&sdma_xbar 35>,
-			       <&sdma_xbar 36>,
-			       <&sdma_xbar 37>,
-			       <&sdma_xbar 38>,
-			       <&sdma_xbar 39>,
-			       <&sdma_xbar 40>,
-			       <&sdma_xbar 41>,
-			       <&sdma_xbar 42>;
-			dma-names = "tx0", "rx0", "tx1", "rx1",
-				    "tx2", "rx2", "tx3", "rx3";
-			status = "disabled";
-		};
-
-		mcspi2: spi@4809a000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x4809a000 0x200>;
-			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi2";
-			ti,spi-num-cs = <2>;
-			dmas = <&sdma_xbar 43>,
-			       <&sdma_xbar 44>,
-			       <&sdma_xbar 45>,
-			       <&sdma_xbar 46>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-			status = "disabled";
-		};
-
-		mcspi3: spi@480b8000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x480b8000 0x200>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi3";
-			ti,spi-num-cs = <2>;
-			dmas = <&sdma_xbar 15>, <&sdma_xbar 16>;
-			dma-names = "tx0", "rx0";
-			status = "disabled";
-		};
-
-		mcspi4: spi@480ba000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x480ba000 0x200>;
-			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi4";
-			ti,spi-num-cs = <1>;
-			dmas = <&sdma_xbar 70>, <&sdma_xbar 71>;
-			dma-names = "tx0", "rx0";
-			status = "disabled";
-		};
-
-		qspi: qspi@4b300000 {
-			compatible = "ti,dra7xxx-qspi";
-			reg = <0x4b300000 0x100>,
-			      <0x5c000000 0x4000000>;
-			reg-names = "qspi_base", "qspi_mmap";
-			syscon-chipselects = <&scm_conf 0x558>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "qspi";
-			clocks = <&qspi_gfclk_div>;
-			clock-names = "fck";
-			num-cs = <4>;
-			interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		/* OCP2SCP3 */
-		ocp2scp@4a090000 {
-			compatible = "ti,omap-ocp2scp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			reg = <0x4a090000 0x20>;
-			ti,hwmods = "ocp2scp3";
-			sata_phy: phy@4A096000 {
-				compatible = "ti,phy-pipe3-sata";
-				reg = <0x4A096000 0x80>, /* phy_rx */
-				      <0x4A096400 0x64>, /* phy_tx */
-				      <0x4A096800 0x40>; /* pll_ctrl */
-				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				syscon-phy-power = <&scm_conf 0x374>;
-				clocks = <&sys_clkin1>, <&sata_ref_clk>;
-				clock-names = "sysclk", "refclk";
-				syscon-pllreset = <&scm_conf 0x3fc>;
-				#phy-cells = <0>;
-			};
-
-			pcie1_phy: pciephy@4a094000 {
-				compatible = "ti,phy-pipe3-pcie";
-				reg = <0x4a094000 0x80>, /* phy_rx */
-				      <0x4a094400 0x64>; /* phy_tx */
-				reg-names = "phy_rx", "phy_tx";
-				syscon-phy-power = <&scm_conf_pcie 0x1c>;
-				syscon-pcs = <&scm_conf_pcie 0x10>;
-				clocks = <&dpll_pcie_ref_ck>,
-					 <&dpll_pcie_ref_m2ldo_ck>,
-					 <&optfclk_pciephy1_32khz>,
-					 <&optfclk_pciephy1_clk>,
-					 <&optfclk_pciephy1_div_clk>,
-					 <&optfclk_pciephy_div>,
-					 <&sys_clkin1>;
-				clock-names = "dpll_ref", "dpll_ref_m2",
-					      "wkupclk", "refclk",
-					      "div-clk", "phy-div", "sysclk";
-				#phy-cells = <0>;
-			};
-
-			pcie2_phy: pciephy@4a095000 {
-				compatible = "ti,phy-pipe3-pcie";
-				reg = <0x4a095000 0x80>, /* phy_rx */
-				      <0x4a095400 0x64>; /* phy_tx */
-				reg-names = "phy_rx", "phy_tx";
-				syscon-phy-power = <&scm_conf_pcie 0x20>;
-				syscon-pcs = <&scm_conf_pcie 0x10>;
-				clocks = <&dpll_pcie_ref_ck>,
-					 <&dpll_pcie_ref_m2ldo_ck>,
-					 <&optfclk_pciephy2_32khz>,
-					 <&optfclk_pciephy2_clk>,
-					 <&optfclk_pciephy2_div_clk>,
-					 <&optfclk_pciephy_div>,
-					 <&sys_clkin1>;
-				clock-names = "dpll_ref", "dpll_ref_m2",
-					      "wkupclk", "refclk",
-					      "div-clk", "phy-div", "sysclk";
-				#phy-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		sata: sata@4a141100 {
-			compatible = "snps,dwc-ahci";
-			reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
-			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&sata_phy>;
-			phy-names = "sata-phy";
-			clocks = <&sata_ref_clk>;
-			ti,hwmods = "sata";
-			ports-implemented = <0x1>;
-		};
-
-		rtc: rtc@48838000 {
-			compatible = "ti,am3352-rtc";
-			reg = <0x48838000 0x100>;
-			interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "rtcss";
-			clocks = <&sys_32k_ck>;
-		};
-
-		/* OCP2SCP1 */
-		ocp2scp@4a080000 {
-			compatible = "ti,omap-ocp2scp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			reg = <0x4a080000 0x20>;
-			ti,hwmods = "ocp2scp1";
-
-			usb2_phy1: phy@4a084000 {
-				compatible = "ti,dra7x-usb2", "ti,omap-usb2";
-				reg = <0x4a084000 0x400>;
-				syscon-phy-power = <&scm_conf 0x300>;
-				clocks = <&usb_phy1_always_on_clk32k>,
-					 <&usb_otg_ss1_refclk960m>;
-				clock-names =	"wkupclk",
-						"refclk";
-				#phy-cells = <0>;
-			};
-
-			usb2_phy2: phy@4a085000 {
-				compatible = "ti,dra7x-usb2-phy2",
-					     "ti,omap-usb2";
-				reg = <0x4a085000 0x400>;
-				syscon-phy-power = <&scm_conf 0xe74>;
-				clocks = <&usb_phy2_always_on_clk32k>,
-					 <&usb_otg_ss2_refclk960m>;
-				clock-names =	"wkupclk",
-						"refclk";
-				#phy-cells = <0>;
-			};
-
-			usb3_phy1: phy@4a084400 {
-				compatible = "ti,omap-usb3";
-				reg = <0x4a084400 0x80>,
-				      <0x4a084800 0x64>,
-				      <0x4a084c00 0x40>;
-				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				syscon-phy-power = <&scm_conf 0x370>;
-				clocks = <&usb_phy3_always_on_clk32k>,
-					 <&sys_clkin1>,
-					 <&usb_otg_ss1_refclk960m>;
-				clock-names =	"wkupclk",
-						"sysclk",
-						"refclk";
-				#phy-cells = <0>;
-			};
-		};
-
-		omap_dwc3_1: omap_dwc3_1@48880000 {
-			compatible = "ti,dwc3";
-			ti,hwmods = "usb_otg_ss1";
-			reg = <0x48880000 0x10000>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			utmi-mode = <2>;
-			ranges;
-			usb1: usb@48890000 {
-				compatible = "snps,dwc3";
-				reg = <0x48890000 0x17000>;
-				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "peripheral",
-						  "host",
-						  "otg";
-				phys = <&usb2_phy1>, <&usb3_phy1>;
-				phy-names = "usb2-phy", "usb3-phy";
-				maximum-speed = "super-speed";
-				dr_mode = "otg";
-				snps,dis_u3_susphy_quirk;
-				snps,dis_u2_susphy_quirk;
-			};
-		};
-
-		omap_dwc3_2: omap_dwc3_2@488c0000 {
-			compatible = "ti,dwc3";
-			ti,hwmods = "usb_otg_ss2";
-			reg = <0x488c0000 0x10000>;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			utmi-mode = <2>;
-			ranges;
-			usb2: usb@488d0000 {
-				compatible = "snps,dwc3";
-				reg = <0x488d0000 0x17000>;
-				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "peripheral",
-						  "host",
-						  "otg";
-				phys = <&usb2_phy2>;
-				phy-names = "usb2-phy";
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
-				snps,dis_u3_susphy_quirk;
-				snps,dis_u2_susphy_quirk;
-			};
-		};
-
-		/* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
-		omap_dwc3_3: omap_dwc3_3@48900000 {
-			compatible = "ti,dwc3";
-			ti,hwmods = "usb_otg_ss3";
-			reg = <0x48900000 0x10000>;
-			interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			utmi-mode = <2>;
-			ranges;
-			status = "disabled";
-			usb3: usb@48910000 {
-				compatible = "snps,dwc3";
-				reg = <0x48910000 0x17000>;
-				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "peripheral",
-						  "host",
-						  "otg";
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
-				snps,dis_u3_susphy_quirk;
-				snps,dis_u2_susphy_quirk;
-			};
-		};
-
-		elm: elm@48078000 {
-			compatible = "ti,am3352-elm";
-			reg = <0x48078000 0xfc0>;      /* device IO registers */
-			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "elm";
-			status = "disabled";
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,am3352-gpmc";
-			ti,hwmods = "gpmc";
-			reg = <0x50000000 0x37c>;      /* device IO registers */
-			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma_xbar 4 0>;
-			dma-names = "rxtx";
-			gpmc,num-cs = <8>;
-			gpmc,num-waitpins = <2>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			status = "disabled";
-		};
-
-		atl: atl@4843c000 {
-			compatible = "ti,dra7-atl";
-			reg = <0x4843c000 0x3ff>;
-			ti,hwmods = "atl";
-			ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
-					     <&atl_clkin2_ck>, <&atl_clkin3_ck>;
-			clocks = <&atl_gfclk_mux>;
-			clock-names = "fck";
-			status = "disabled";
-		};
-
-		mcasp1: mcasp@48460000 {
-			compatible = "ti,dra7-mcasp-audio";
-			ti,hwmods = "mcasp1";
-			reg = <0x48460000 0x2000>,
-			      <0x45800000 0x1000>;
-			reg-names = "mpu","dat";
-			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "tx", "rx";
-			dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
-			dma-names = "tx", "rx";
-			clocks = <&mcasp1_aux_gfclk_mux>, <&mcasp1_ahclkx_mux>,
-				 <&mcasp1_ahclkr_mux>;
-			clock-names = "fck", "ahclkx", "ahclkr";
-			status = "disabled";
-		};
-
-		mcasp2: mcasp@48464000 {
-			compatible = "ti,dra7-mcasp-audio";
-			ti,hwmods = "mcasp2";
-			reg = <0x48464000 0x2000>,
-			      <0x45c00000 0x1000>;
-			reg-names = "mpu","dat";
-			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "tx", "rx";
-			dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
-			dma-names = "tx", "rx";
-			clocks = <&mcasp2_aux_gfclk_mux>, <&mcasp2_ahclkx_mux>,
-				 <&mcasp2_ahclkr_mux>;
-			clock-names = "fck", "ahclkx", "ahclkr";
-			status = "disabled";
-		};
-
-		mcasp3: mcasp@48468000 {
-			compatible = "ti,dra7-mcasp-audio";
-			ti,hwmods = "mcasp3";
-			reg = <0x48468000 0x2000>,
-			      <0x46000000 0x1000>;
-			reg-names = "mpu","dat";
-			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "tx", "rx";
-			dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
-			dma-names = "tx", "rx";
-			clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>;
-			clock-names = "fck", "ahclkx";
-			status = "disabled";
-		};
-
-		mcasp4: mcasp@4846c000 {
-			compatible = "ti,dra7-mcasp-audio";
-			ti,hwmods = "mcasp4";
-			reg = <0x4846c000 0x2000>,
-			      <0x48436000 0x1000>;
-			reg-names = "mpu","dat";
-			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "tx", "rx";
-			dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
-			dma-names = "tx", "rx";
-			clocks = <&mcasp4_aux_gfclk_mux>, <&mcasp4_ahclkx_mux>;
-			clock-names = "fck", "ahclkx";
-			status = "disabled";
-		};
-
-		mcasp5: mcasp@48470000 {
-			compatible = "ti,dra7-mcasp-audio";
-			ti,hwmods = "mcasp5";
-			reg = <0x48470000 0x2000>,
-			      <0x4843a000 0x1000>;
-			reg-names = "mpu","dat";
-			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "tx", "rx";
-			dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
-			dma-names = "tx", "rx";
-			clocks = <&mcasp5_aux_gfclk_mux>, <&mcasp5_ahclkx_mux>;
-			clock-names = "fck", "ahclkx";
-			status = "disabled";
-		};
-
-		mcasp6: mcasp@48474000 {
-			compatible = "ti,dra7-mcasp-audio";
-			ti,hwmods = "mcasp6";
-			reg = <0x48474000 0x2000>,
-			      <0x4844c000 0x1000>;
-			reg-names = "mpu","dat";
-			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "tx", "rx";
-			dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
-			dma-names = "tx", "rx";
-			clocks = <&mcasp6_aux_gfclk_mux>, <&mcasp6_ahclkx_mux>;
-			clock-names = "fck", "ahclkx";
-			status = "disabled";
-		};
-
-		mcasp7: mcasp@48478000 {
-			compatible = "ti,dra7-mcasp-audio";
-			ti,hwmods = "mcasp7";
-			reg = <0x48478000 0x2000>,
-			      <0x48450000 0x1000>;
-			reg-names = "mpu","dat";
-			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "tx", "rx";
-			dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
-			dma-names = "tx", "rx";
-			clocks = <&mcasp7_aux_gfclk_mux>, <&mcasp7_ahclkx_mux>;
-			clock-names = "fck", "ahclkx";
-			status = "disabled";
-		};
-
-		mcasp8: mcasp@4847c000 {
-			compatible = "ti,dra7-mcasp-audio";
-			ti,hwmods = "mcasp8";
-			reg = <0x4847c000 0x2000>,
-			      <0x48454000 0x1000>;
-			reg-names = "mpu","dat";
-			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "tx", "rx";
-			dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
-			dma-names = "tx", "rx";
-			clocks = <&mcasp8_aux_gfclk_mux>, <&mcasp8_ahclkx_mux>;
-			clock-names = "fck", "ahclkx";
-			status = "disabled";
-		};
-
-		crossbar_mpu: crossbar@4a002a48 {
-			compatible = "ti,irq-crossbar";
-			reg = <0x4a002a48 0x130>;
-			interrupt-controller;
-			interrupt-parent = <&wakeupgen>;
-			#interrupt-cells = <3>;
-			ti,max-irqs = <160>;
-			ti,max-crossbar-sources = <MAX_SOURCES>;
-			ti,reg-size = <2>;
-			ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
-			ti,irqs-skip = <10 133 139 140>;
-			ti,irqs-safe-map = <0>;
-		};
-
-		mac: ethernet@48484000 {
-			compatible = "ti,dra7-cpsw","ti,cpsw";
-			ti,hwmods = "gmac";
-			clocks = <&gmac_main_clk>, <&gmac_rft_clk_mux>;
-			clock-names = "fck", "cpts";
-			cpdma_channels = <8>;
-			ale_entries = <1024>;
-			bd_ram_size = <0x2000>;
-			mac_control = <0x20>;
-			slaves = <2>;
-			active_slave = <0>;
-			cpts_clock_mult = <0x784CFE14>;
-			cpts_clock_shift = <29>;
-			reg = <0x48484000 0x1000
-			       0x48485200 0x2E00>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			/*
-			 * Do not allow gating of cpsw clock as workaround
-			 * for errata i877. Keeping internal clock disabled
-			 * causes the device switching characteristics
-			 * to degrade over time and eventually fail to meet
-			 * the data manual delay time/skew specs.
-			 */
-			ti,no-idle;
-
-			/*
-			 * rx_thresh_pend
-			 * rx_pend
-			 * tx_pend
-			 * misc_pend
-			 */
-			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
-			ranges;
-			syscon = <&scm_conf>;
-			status = "disabled";
-
-			davinci_mdio: mdio@48485000 {
-				compatible = "ti,cpsw-mdio","ti,davinci_mdio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,hwmods = "davinci_mdio";
-				bus_freq = <1000000>;
-				reg = <0x48485000 0x100>;
-			};
-
-			cpsw_emac0: slave@48480200 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			cpsw_emac1: slave@48480300 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			phy_sel: cpsw-phy-sel@4a002554 {
-				compatible = "ti,dra7xx-cpsw-phy-sel";
-				reg= <0x4a002554 0x4>;
-				reg-names = "gmii-sel";
-			};
-		};
-
-		dcan1: can@481cc000 {
-			compatible = "ti,dra7-d_can";
-			ti,hwmods = "dcan1";
-			reg = <0x4ae3c000 0x2000>;
-			syscon-raminit = <&scm_conf 0x558 0>;
-			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&dcan1_sys_clk_mux>;
-			status = "disabled";
-		};
-
-		dcan2: can@481d0000 {
-			compatible = "ti,dra7-d_can";
-			ti,hwmods = "dcan2";
-			reg = <0x48480000 0x2000>;
-			syscon-raminit = <&scm_conf 0x558 1>;
-			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&sys_clkin1>;
-			status = "disabled";
-		};
-
-		dss: dss@58000000 {
-			compatible = "ti,dra7-dss";
-			/* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
-			/* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
-			status = "disabled";
-			ti,hwmods = "dss_core";
-			/* CTRL_CORE_DSS_PLL_CONTROL */
-			syscon-pll-ctrl = <&scm_conf 0x538>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			dispc@58001000 {
-				compatible = "ti,dra7-dispc";
-				reg = <0x58001000 0x1000>;
-				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				ti,hwmods = "dss_dispc";
-				clocks = <&dss_dss_clk>;
-				clock-names = "fck";
-				/* CTRL_CORE_SMA_SW_1 */
-				syscon-pol = <&scm_conf 0x534>;
-			};
-
-			hdmi: encoder@58060000 {
-				compatible = "ti,dra7-hdmi";
-				reg = <0x58040000 0x200>,
-				      <0x58040200 0x80>,
-				      <0x58040300 0x80>,
-				      <0x58060000 0x19000>;
-				reg-names = "wp", "pll", "phy", "core";
-				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				ti,hwmods = "dss_hdmi";
-				clocks = <&dss_48mhz_clk>, <&dss_hdmi_clk>;
-				clock-names = "fck", "sys_clk";
-			};
-		};
-
-		epwmss0: epwmss@4843e000 {
-			compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
-			reg = <0x4843e000 0x30>;
-			ti,hwmods = "epwmss0";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-			ranges;
-
-			ehrpwm0: pwm@4843e200 {
-				compatible = "ti,dra746-ehrpwm",
-					     "ti,am3352-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x4843e200 0x80>;
-				clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
-				clock-names = "tbclk", "fck";
-				status = "disabled";
-			};
-
-			ecap0: ecap@4843e100 {
-				compatible = "ti,dra746-ecap",
-					     "ti,am3352-ecap";
-				#pwm-cells = <3>;
-				reg = <0x4843e100 0x80>;
-				clocks = <&l4_root_clk_div>;
-				clock-names = "fck";
-				status = "disabled";
-			};
-		};
-
-		epwmss1: epwmss@48440000 {
-			compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
-			reg = <0x48440000 0x30>;
-			ti,hwmods = "epwmss1";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-			ranges;
-
-			ehrpwm1: pwm@48440200 {
-				compatible = "ti,dra746-ehrpwm",
-					     "ti,am3352-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48440200 0x80>;
-				clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>;
-				clock-names = "tbclk", "fck";
-				status = "disabled";
-			};
-
-			ecap1: ecap@48440100 {
-				compatible = "ti,dra746-ecap",
-					     "ti,am3352-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48440100 0x80>;
-				clocks = <&l4_root_clk_div>;
-				clock-names = "fck";
-				status = "disabled";
-			};
-		};
-
-		epwmss2: epwmss@48442000 {
-			compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
-			reg = <0x48442000 0x30>;
-			ti,hwmods = "epwmss2";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-			ranges;
-
-			ehrpwm2: pwm@48442200 {
-				compatible = "ti,dra746-ehrpwm",
-					     "ti,am3352-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48442200 0x80>;
-				clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>;
-				clock-names = "tbclk", "fck";
-				status = "disabled";
-			};
-
-			ecap2: ecap@48442100 {
-				compatible = "ti,dra746-ecap",
-					     "ti,am3352-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48442100 0x80>;
-				clocks = <&l4_root_clk_div>;
-				clock-names = "fck";
-				status = "disabled";
-			};
-		};
-
-		aes1: aes@4b500000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes1";
-			reg = <0x4b500000 0xa0>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
-			dma-names = "tx", "rx";
-			clocks = <&l3_iclk_div>;
-			clock-names = "fck";
-		};
-
-		aes2: aes@4b700000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes2";
-			reg = <0x4b700000 0xa0>;
-			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
-			dma-names = "tx", "rx";
-			clocks = <&l3_iclk_div>;
-			clock-names = "fck";
-		};
-
-		des: des@480a5000 {
-			compatible = "ti,omap4-des";
-			ti,hwmods = "des";
-			reg = <0x480a5000 0xa0>;
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
-			dma-names = "tx", "rx";
-			clocks = <&l3_iclk_div>;
-			clock-names = "fck";
-		};
-
-		sham: sham@53100000 {
-			compatible = "ti,omap5-sham";
-			ti,hwmods = "sham";
-			reg = <0x4b101000 0x300>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma_xbar 119 0>;
-			dma-names = "rx";
-			clocks = <&l3_iclk_div>;
-			clock-names = "fck";
-		};
-
-		rng: rng@48090000 {
-			compatible = "ti,omap4-rng";
-			ti,hwmods = "rng";
-			reg = <0x48090000 0x2000>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&l3_iclk_div>;
-			clock-names = "fck";
-		};
-	};
-
-	thermal_zones: thermal-zones {
-		#include "omap4-cpu-thermal.dtsi"
-		#include "omap5-gpu-thermal.dtsi"
-		#include "omap5-core-thermal.dtsi"
-		#include "dra7-dspeve-thermal.dtsi"
-		#include "dra7-iva-thermal.dtsi"
-	};
-
-};
-
-&cpu_thermal {
-	polling-delay = <500>; /* milliseconds */
-	coefficients = <0 2000>;
-};
-
-&gpu_thermal {
-	coefficients = <0 2000>;
-};
-
-&core_thermal {
-	coefficients = <0 2000>;
-};
-
-&dspeve_thermal {
-	coefficients = <0 2000>;
-};
-
-&iva_thermal {
-	coefficients = <0 2000>;
-};
-
-&cpu_crit {
-	temperature = <120000>; /* milli Celsius */
-};
-
-/include/ "dra7xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
deleted file mode 100644
index 4d57a55473af..000000000000
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "dra72-evm-common.dtsi"
-#include <dt-bindings/net/ti-dp83867.h>
-
-/ {
-	compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7";
-	model = "TI DRA718 EVM";
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
-	};
-
-	vpo_sd_1v8_3v3: gpio-regulator-TPS74801 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "vddshv8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3000000>;
-		regulator-boot-on;
-		vin-supply = <&evm_5v0>;
-
-		gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x0
-			  3000000 0x1>;
-	};
-
-	poweroff: gpio-poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>;
-		input;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	lp8733: lp8733@60 {
-		compatible = "ti,lp8733";
-		reg = <0x60>;
-
-		buck0-in-supply =<&vsys_3v3>;
-		buck1-in-supply =<&vsys_3v3>;
-		ldo0-in-supply =<&evm_5v0>;
-		ldo1-in-supply =<&evm_5v0>;
-
-		lp8733_regulators: regulators {
-			lp8733_buck0_reg: buck0 {
-				/* FB_B0 -> LP8733-BUCK1 - VPO_S1_AVS - VDD_CORE_AVS (core, mpu, gpu) */
-				regulator-name = "lp8733-buck0";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1250000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			lp8733_buck1_reg: buck1 {
-				/* FB_B1 -> LP8733-BUCK2 - VPO_S2_AVS - VDD_DSP_AVS (DSP/eve/iva) */
-				regulator-name = "lp8733-buck1";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1250000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			lp8733_ldo0_reg: ldo0 {
-				/* LDO0 -> LP8733-LDO1 - VPO_L1_3V3 - VDDSHV8 (optional) */
-				regulator-name = "lp8733-ldo0";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			lp8733_ldo1_reg: ldo1 {
-				/* LDO1 -> LP8733-LDO2 - VPO_L2_3V3 - VDDA_USB3V3 */
-				regulator-name = "lp8733-ldo1";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-	};
-
-	lp8732: lp8732@61 {
-		compatible = "ti,lp8732";
-		reg = <0x61>;
-
-		buck0-in-supply =<&vsys_3v3>;
-		buck1-in-supply =<&vsys_3v3>;
-		ldo0-in-supply =<&vsys_3v3>;
-		ldo1-in-supply =<&vsys_3v3>;
-
-		lp8732_regulators: regulators {
-			lp8732_buck0_reg: buck0 {
-				/* FB_B0 -> LP8732-BUCK1 - VPO_S3_1V8 - VDDS_1V8 */
-				regulator-name = "lp8732-buck0";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			lp8732_buck1_reg: buck1 {
-				/* FB_B1 -> LP8732-BUCK2 - VPO_S4_DDR - VDD_DDR_1V35 */
-				regulator-name = "lp8732-buck1";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			lp8732_ldo0_reg: ldo0 {
-				/* LDO0 -> LP8732-LDO1 - VPO_L3_1V8 - VDA_1V8_PLL */
-				regulator-name = "lp8732-ldo0";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			lp8732_ldo1_reg: ldo1 {
-				/* LDO1 -> LP8732-LDO2 - VPO_L4_1V8 - VDA_1V8_PHY */
-				regulator-name = "lp8732-ldo1";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-	};
-};
-
-&pcf_lcd {
-	interrupt-parent = <&gpio7>;
-	interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
-};
-
-&pcf_gpio_21 {
-	interrupt-parent = <&gpio7>;
-	interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
-};
-
-&pcf_hdmi {
-	p0 {
-		/*
-		 * PM_OEn to High: Disable routing I2C3 to PM_I2C
-		 * With this PM_SEL(p3) should not matter
-		 */
-		gpio-hog;
-		gpios = <0 GPIO_ACTIVE_LOW>;
-		output-high;
-		line-name = "pm_oe_n";
-	};
-};
-
-&mmc1 {
-	vmmc_aux-supply = <&vpo_sd_1v8_3v3>;
-};
-
-&mac {
-	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
-		     <&pcf_hdmi 9 GPIO_ACTIVE_LOW>,	/* P11 */
-		     <&pcf_hdmi 10 GPIO_ACTIVE_LOW>;	/* P12 */
-	dual_emac;
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <2>;
-	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <3>;
-	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
-};
-
-&davinci_mdio {
-	dp83867_0: ethernet-phy@2 {
-		reg = <2>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
-		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
-		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-		ti,impedance-control = <0x1f>;
-	};
-
-	dp83867_1: ethernet-phy@3 {
-		reg = <3>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
-		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
-		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-		ti,impedance-control = <0x1f>;
-	};
-};
-
-/* No Sata on this device */
-&sata_phy {
-	status = "disabled";
-};
-
-&sata {
-	status = "disabled";
-};
-
-/* No RTC on this device */
-&rtc {
-	status = "disabled";
-};
-
-&usb2_phy1 {
-	phy-supply = <&lp8733_ldo1_reg>;
-};
-
-&usb2_phy2 {
-	phy-supply = <&lp8733_ldo1_reg>;
-};
-
-&dss {
-	/* Supplied by VDA_1V8_PLL */
-	vdda_video-supply = <&lp8732_ldo0_reg>;
-};
-
-&hdmi {
-	/* Supplied by VDA_1V8_PHY */
-	vdda_video-supply = <&lp8732_ldo1_reg>;
-};
diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts
deleted file mode 100644
index 3ecac56bf504..000000000000
--- a/arch/arm/boot/dts/dra72-evm-revc.dts
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include "dra72-evm-common.dtsi"
-#include <dt-bindings/net/ti-dp83867.h>
-
-/ {
-	model = "TI DRA722 Rev C EVM";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
-	};
-};
-
-&i2c1 {
-	tps65917: tps65917@58 {
-		reg = <0x58>;
-
-		interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>;  /* IRQ_SYS_1N */
-	};
-};
-
-#include "dra72-evm-tps65917.dtsi"
-
-&ldo2_reg {
-	/* LDO2_OUT --> VDDA_1V8_PHY2 */
-	regulator-always-on;
-	regulator-boot-on;
-};
-
-&hdmi {
-	vdda-supply = <&ldo2_reg>;
-};
-
-&pcf_gpio_21 {
-	interrupt-parent = <&gpio3>;
-	interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
-};
-
-&mac {
-	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
-		     <&pcf_hdmi 9 GPIO_ACTIVE_LOW>,	/* P11 */
-		     <&pcf_hdmi 10 GPIO_ACTIVE_LOW>;	/* P12 */
-	dual_emac;
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <2>;
-	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <3>;
-	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
-};
-
-&davinci_mdio {
-	dp83867_0: ethernet-phy@2 {
-		reg = <2>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
-		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
-		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-		ti,min-output-impedance;
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
-	};
-
-	dp83867_1: ethernet-phy@3 {
-		reg = <3>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
-		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
-		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-		ti,min-output-impedance;
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
-	};
-};
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
deleted file mode 100644
index cd9c4ff12654..000000000000
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include "dra72-evm-common.dtsi"
-/ {
-	model = "TI DRA722";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
-	};
-};
-
-&i2c1 {
-	tps65917: tps65917@58 {
-		reg = <0x58>;
-
-		interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>;  /* IRQ_SYS_1N */
-	};
-};
-
-#include "dra72-evm-tps65917.dtsi"
-
-&hdmi {
-	vdda-supply = <&ldo3_reg>;
-};
-
-&pcf_gpio_21 {
-	interrupt-parent = <&gpio6>;
-	interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-};
-
-&mac {
-	slaves = <1>;
-	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>;
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <3>;
-	phy-mode = "rgmii";
-};
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
deleted file mode 100644
index 67107605fb4c..000000000000
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * Based on "omap4.dtsi"
- */
-
-#include "dra7.dtsi"
-
-/ {
-	compatible = "ti,dra722", "ti,dra72", "ti,dra7";
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupt-parent = <&wakeupgen>;
-		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
-
-&dss {
-	reg = <0x58000000 0x80>,
-	      <0x58004054 0x4>,
-	      <0x58004300 0x20>;
-	reg-names = "dss", "pll1_clkctrl", "pll1";
-
-	clocks = <&dss_dss_clk>,
-		 <&dss_video1_clk>;
-	clock-names = "fck", "video1_clk";
-};
-
-&mailbox5 {
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
-		ti,mbox-tx = <6 2 2>;
-		ti,mbox-rx = <4 2 2>;
-		status = "disabled";
-	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
-		ti,mbox-tx = <5 2 2>;
-		ti,mbox-rx = <1 2 2>;
-		status = "disabled";
-	};
-};
-
-&mailbox6 {
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
-		ti,mbox-tx = <6 2 2>;
-		ti,mbox-rx = <4 2 2>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
deleted file mode 100644
index 24e6746c5b26..000000000000
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * Based on "omap4.dtsi"
- */
-
-#include "dra7.dtsi"
-
-/ {
-	compatible = "ti,dra742", "ti,dra74", "ti,dra7";
-
-	cpus {
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupt-parent = <&wakeupgen>;
-		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	ocp {
-		dsp2_system: dsp_system@41500000 {
-			compatible = "syscon";
-			reg = <0x41500000 0x100>;
-		};
-
-		omap_dwc3_4: omap_dwc3_4@48940000 {
-			compatible = "ti,dwc3";
-			ti,hwmods = "usb_otg_ss4";
-			reg = <0x48940000 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			utmi-mode = <2>;
-			ranges;
-			status = "disabled";
-			usb4: usb@48950000 {
-				compatible = "snps,dwc3";
-				reg = <0x48950000 0x17000>;
-				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "peripheral",
-						  "host",
-						  "otg";
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
-			};
-		};
-
-		mmu0_dsp2: mmu@41501000 {
-			compatible = "ti,dra7-dsp-iommu";
-			reg = <0x41501000 0x100>;
-			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu0_dsp2";
-			#iommu-cells = <0>;
-			ti,syscon-mmuconfig = <&dsp2_system 0x0>;
-			status = "disabled";
-		};
-
-		mmu1_dsp2: mmu@41502000 {
-			compatible = "ti,dra7-dsp-iommu";
-			reg = <0x41502000 0x100>;
-			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu1_dsp2";
-			#iommu-cells = <0>;
-			ti,syscon-mmuconfig = <&dsp2_system 0x1>;
-			status = "disabled";
-		};
-	};
-};
-
-&cpu0_opp_table {
-	opp-shared;
-};
-
-&dss {
-	reg = <0x58000000 0x80>,
-	      <0x58004054 0x4>,
-	      <0x58004300 0x20>,
-	      <0x58009054 0x4>,
-	      <0x58009300 0x20>;
-	reg-names = "dss", "pll1_clkctrl", "pll1",
-		    "pll2_clkctrl", "pll2";
-
-	clocks = <&dss_dss_clk>,
-		 <&dss_video1_clk>,
-		 <&dss_video2_clk>;
-	clock-names = "fck", "video1_clk", "video2_clk";
-};
-
-&mailbox5 {
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
-		ti,mbox-tx = <6 2 2>;
-		ti,mbox-rx = <4 2 2>;
-		status = "disabled";
-	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
-		ti,mbox-tx = <5 2 2>;
-		ti,mbox-rx = <1 2 2>;
-		status = "disabled";
-	};
-};
-
-&mailbox6 {
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
-		ti,mbox-tx = <6 2 2>;
-		ti,mbox-rx = <4 2 2>;
-		status = "disabled";
-	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
-		ti,mbox-tx = <5 2 2>;
-		ti,mbox-rx = <1 2 2>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
deleted file mode 100644
index cf229dfabf61..000000000000
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ /dev/null
@@ -1,2216 +0,0 @@
-/*
- * Device Tree Source for DRA7xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&cm_core_aon_clocks {
-	atl_clkin0_ck: atl_clkin0_ck {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_gfclk_mux>;
-	};
-
-	atl_clkin1_ck: atl_clkin1_ck {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_gfclk_mux>;
-	};
-
-	atl_clkin2_ck: atl_clkin2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_gfclk_mux>;
-	};
-
-	atl_clkin3_ck: atl_clkin3_ck {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_gfclk_mux>;
-	};
-
-	hdmi_clkin_ck: hdmi_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	mlb_clkin_ck: mlb_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	mlbp_clkin_ck: mlbp_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	pciesref_acs_clk_ck: pciesref_acs_clk_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <100000000>;
-	};
-
-	ref_clkin0_ck: ref_clkin0_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	ref_clkin1_ck: ref_clkin1_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	ref_clkin2_ck: ref_clkin2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	ref_clkin3_ck: ref_clkin3_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	rmii_clk_ck: rmii_clk_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	sdvenc_clkin_ck: sdvenc_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	sys_clk32_crystal_ck: sys_clk32_crystal_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	sys_clk32_pseudo_ck: sys_clk32_pseudo_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin1>;
-		clock-mult = <1>;
-		clock-div = <610>;
-	};
-
-	virt_12000000_ck: virt_12000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	virt_13000000_ck: virt_13000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
-	};
-
-	virt_16800000_ck: virt_16800000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <16800000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_20000000_ck: virt_20000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <20000000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	virt_27000000_ck: virt_27000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <27000000>;
-	};
-
-	virt_38400000_ck: virt_38400000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <38400000>;
-	};
-
-	sys_clkin2: sys_clkin2 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <22579200>;
-	};
-
-	usb_otg_clkin_ck: usb_otg_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	video1_clkin_ck: video1_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	video1_m2_clkin_ck: video1_m2_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	video2_clkin_ck: video2_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	video2_m2_clkin_ck: video2_m2_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	dpll_abe_ck: dpll_abe_ck@1e0 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-m4xen-clock";
-		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
-		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
-	};
-
-	dpll_abe_x2_ck: dpll_abe_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_abe_ck>;
-	};
-
-	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01f0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	abe_clk: abe_clk@108 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		ti,max-div = <4>;
-		reg = <0x0108>;
-		ti,index-power-of-two;
-	};
-
-	dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01f0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01f4>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_byp_mux: dpll_core_byp_mux@12c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x012c>;
-	};
-
-	dpll_core_ck: dpll_core_ck@120 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-core-clock";
-		clocks = <&sys_clkin1>, <&dpll_core_byp_mux>;
-		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
-	};
-
-	dpll_core_x2_ck: dpll_core_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x013c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_mpu_ck: dpll_mpu_ck@160 {
-		#clock-cells = <0>;
-		compatible = "ti,omap5-mpu-dpll-clock";
-		clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>;
-		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
-	};
-
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0170>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	mpu_dclk_div: mpu_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_mpu_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dsp_dpll_hs_clk_div: dsp_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_dsp_byp_mux: dpll_dsp_byp_mux@240 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x0240>;
-	};
-
-	dpll_dsp_ck: dpll_dsp_ck@234 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>;
-		reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
-		assigned-clocks = <&dpll_dsp_ck>;
-		assigned-clock-rates = <600000000>;
-	};
-
-	dpll_dsp_m2_ck: dpll_dsp_m2_ck@244 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_dsp_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0244>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		assigned-clocks = <&dpll_dsp_m2_ck>;
-		assigned-clock-rates = <600000000>;
-	};
-
-	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_iva_byp_mux: dpll_iva_byp_mux@1ac {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x01ac>;
-	};
-
-	dpll_iva_ck: dpll_iva_ck@1a0 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>;
-		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
-		assigned-clocks = <&dpll_iva_ck>;
-		assigned-clock-rates = <1165000000>;
-	};
-
-	dpll_iva_m2_ck: dpll_iva_m2_ck@1b0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_iva_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01b0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		assigned-clocks = <&dpll_iva_m2_ck>;
-		assigned-clock-rates = <388333334>;
-	};
-
-	iva_dclk: iva_dclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_iva_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_gpu_byp_mux: dpll_gpu_byp_mux@2e4 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x02e4>;
-	};
-
-	dpll_gpu_ck: dpll_gpu_ck@2d8 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>;
-		reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
-		assigned-clocks = <&dpll_gpu_ck>;
-		assigned-clock-rates = <1277000000>;
-	};
-
-	dpll_gpu_m2_ck: dpll_gpu_m2_ck@2e8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gpu_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02e8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		assigned-clocks = <&dpll_gpu_m2_ck>;
-		assigned-clock-rates = <425666667>;
-	};
-
-	dpll_core_m2_ck: dpll_core_m2_ck@130 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0130>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	core_dpll_out_dclk_div: core_dpll_out_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_ddr_byp_mux: dpll_ddr_byp_mux@21c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x021c>;
-	};
-
-	dpll_ddr_ck: dpll_ddr_ck@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>;
-		reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
-	};
-
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck@220 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0220>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_byp_mux: dpll_gmac_byp_mux@2b4 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x02b4>;
-	};
-
-	dpll_gmac_ck: dpll_gmac_ck@2a8 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>;
-		reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
-	};
-
-	dpll_gmac_m2_ck: dpll_gmac_m2_ck@2b8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02b8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	video2_dclk_div: video2_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video2_m2_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	video1_dclk_div: video1_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video1_m2_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	hdmi_dclk_div: hdmi_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&hdmi_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <3>;
-	};
-
-	eve_dpll_hs_clk_div: eve_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_eve_byp_mux: dpll_eve_byp_mux@290 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x0290>;
-	};
-
-	dpll_eve_ck: dpll_eve_ck@284 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>;
-		reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
-	};
-
-	dpll_eve_m2_ck: dpll_eve_m2_ck@294 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_eve_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0294>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	eve_dclk_div: eve_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_eve_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0140>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0144>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0154>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0158>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x015c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_ddr_ck>;
-	};
-
-	dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck@228 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0228>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_dsp_x2_ck: dpll_dsp_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_dsp_ck>;
-	};
-
-	dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck@248 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_dsp_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0248>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		assigned-clocks = <&dpll_dsp_m3x2_ck>;
-		assigned-clock-rates = <400000000>;
-	};
-
-	dpll_gmac_x2_ck: dpll_gmac_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_gmac_ck>;
-	};
-
-	dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck@2c0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02c0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck@2c4 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02c4>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck@2c8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02c8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck@2bc {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02bc>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	gmii_m_clk_div: gmii_m_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_gmac_h11x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	hdmi_clk2_div: hdmi_clk2_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&hdmi_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	hdmi_div_clk: hdmi_div_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&hdmi_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l3_iclk_div: l3_iclk_div@100 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		ti,max-div = <2>;
-		ti,bit-shift = <4>;
-		reg = <0x0100>;
-		clocks = <&dpll_core_h12x2_ck>;
-		ti,index-power-of-two;
-	};
-
-	l4_root_clk_div: l4_root_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l3_iclk_div>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	video1_clk2_div: video1_clk2_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video1_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	video1_div_clk: video1_div_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video1_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	video2_clk2_div: video2_clk2_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video2_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	video2_div_clk: video2_div_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video2_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	ipu1_gfclk_mux: ipu1_gfclk_mux@520 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0520>;
-		assigned-clocks = <&ipu1_gfclk_mux>;
-		assigned-clock-parents = <&dpll_core_h22x2_ck>;
-	};
-
-	mcasp1_ahclkr_mux: mcasp1_ahclkr_mux@550 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <28>;
-		reg = <0x0550>;
-	};
-
-	mcasp1_ahclkx_mux: mcasp1_ahclkx_mux@550 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0550>;
-	};
-
-	mcasp1_aux_gfclk_mux: mcasp1_aux_gfclk_mux@550 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x0550>;
-	};
-
-	timer5_gfclk_mux: timer5_gfclk_mux@558 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
-		ti,bit-shift = <24>;
-		reg = <0x0558>;
-	};
-
-	timer6_gfclk_mux: timer6_gfclk_mux@560 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
-		ti,bit-shift = <24>;
-		reg = <0x0560>;
-	};
-
-	timer7_gfclk_mux: timer7_gfclk_mux@568 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
-		ti,bit-shift = <24>;
-		reg = <0x0568>;
-	};
-
-	timer8_gfclk_mux: timer8_gfclk_mux@570 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
-		ti,bit-shift = <24>;
-		reg = <0x0570>;
-	};
-
-	uart6_gfclk_mux: uart6_gfclk_mux@580 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0580>;
-	};
-
-	dummy_ck: dummy_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-};
-&prm_clocks {
-	sys_clkin1: sys_clkin1@110 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
-		reg = <0x0110>;
-		ti,index-starts-at-one;
-	};
-
-	abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux@118 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x0118>;
-	};
-
-	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@114 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
-		reg = <0x0114>;
-	};
-
-	abe_dpll_clk_mux: abe_dpll_clk_mux@10c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
-		reg = <0x010c>;
-	};
-
-	abe_24m_fclk: abe_24m_fclk@11c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		reg = <0x011c>;
-		ti,dividers = <8>, <16>;
-	};
-
-	aess_fclk: aess_fclk@178 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&abe_clk>;
-		reg = <0x0178>;
-		ti,max-div = <2>;
-	};
-
-	abe_giclk_div: abe_giclk_div@174 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&aess_fclk>;
-		reg = <0x0174>;
-		ti,max-div = <2>;
-	};
-
-	abe_lp_clk_div: abe_lp_clk_div@1d8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		reg = <0x01d8>;
-		ti,dividers = <16>, <32>;
-	};
-
-	abe_sys_clk_div: abe_sys_clk_div@120 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		reg = <0x0120>;
-		ti,max-div = <2>;
-	};
-
-	adc_gfclk_mux: adc_gfclk_mux@1dc {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>;
-		reg = <0x01dc>;
-	};
-
-	sys_clk1_dclk_div: sys_clk1_dclk_div@1c8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		ti,max-div = <64>;
-		reg = <0x01c8>;
-		ti,index-power-of-two;
-	};
-
-	sys_clk2_dclk_div: sys_clk2_dclk_div@1cc {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin2>;
-		ti,max-div = <64>;
-		reg = <0x01cc>;
-		ti,index-power-of-two;
-	};
-
-	per_abe_x1_dclk_div: per_abe_x1_dclk_div@1bc {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01bc>;
-		ti,index-power-of-two;
-	};
-
-	dsp_gclk_div: dsp_gclk_div@18c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_dsp_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x018c>;
-		ti,index-power-of-two;
-	};
-
-	gpu_dclk: gpu_dclk@1a0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gpu_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01a0>;
-		ti,index-power-of-two;
-	};
-
-	emif_phy_dclk_div: emif_phy_dclk_div@190 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x0190>;
-		ti,index-power-of-two;
-	};
-
-	gmac_250m_dclk_div: gmac_250m_dclk_div@19c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x019c>;
-		ti,index-power-of-two;
-	};
-
-	gmac_main_clk: gmac_main_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&gmac_250m_dclk_div>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l3init_480m_dclk_div: l3init_480m_dclk_div@1ac {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_usb_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01ac>;
-		ti,index-power-of-two;
-	};
-
-	usb_otg_dclk_div: usb_otg_dclk_div@184 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&usb_otg_clkin_ck>;
-		ti,max-div = <64>;
-		reg = <0x0184>;
-		ti,index-power-of-two;
-	};
-
-	sata_dclk_div: sata_dclk_div@1c0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		ti,max-div = <64>;
-		reg = <0x01c0>;
-		ti,index-power-of-two;
-	};
-
-	pcie2_dclk_div: pcie2_dclk_div@1b8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_pcie_ref_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01b8>;
-		ti,index-power-of-two;
-	};
-
-	pcie_dclk_div: pcie_dclk_div@1b4 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&apll_pcie_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01b4>;
-		ti,index-power-of-two;
-	};
-
-	emu_dclk_div: emu_dclk_div@194 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		ti,max-div = <64>;
-		reg = <0x0194>;
-		ti,index-power-of-two;
-	};
-
-	secure_32k_dclk_div: secure_32k_dclk_div@1c4 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&secure_32k_clk_src_ck>;
-		ti,max-div = <64>;
-		reg = <0x01c4>;
-		ti,index-power-of-two;
-	};
-
-	clkoutmux0_clk_mux: clkoutmux0_clk_mux@158 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
-		reg = <0x0158>;
-	};
-
-	clkoutmux1_clk_mux: clkoutmux1_clk_mux@15c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
-		reg = <0x015c>;
-	};
-
-	clkoutmux2_clk_mux: clkoutmux2_clk_mux@160 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
-		reg = <0x0160>;
-	};
-
-	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin1>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	eve_clk: eve_clk@180 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>;
-		reg = <0x0180>;
-	};
-
-	hdmi_dpll_clk_mux: hdmi_dpll_clk_mux@164 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x0164>;
-	};
-
-	mlb_clk: mlb_clk@134 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mlb_clkin_ck>;
-		ti,max-div = <64>;
-		reg = <0x0134>;
-		ti,index-power-of-two;
-	};
-
-	mlbp_clk: mlbp_clk@130 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mlbp_clkin_ck>;
-		ti,max-div = <64>;
-		reg = <0x0130>;
-		ti,index-power-of-two;
-	};
-
-	per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div@138 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x0138>;
-		ti,index-power-of-two;
-	};
-
-	timer_sys_clk_div: timer_sys_clk_div@144 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		reg = <0x0144>;
-		ti,max-div = <2>;
-	};
-
-	video1_dpll_clk_mux: video1_dpll_clk_mux@168 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x0168>;
-	};
-
-	video2_dpll_clk_mux: video2_dpll_clk_mux@16c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x016c>;
-	};
-
-	wkupaon_iclk_mux: wkupaon_iclk_mux@108 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&abe_lp_clk_div>;
-		reg = <0x0108>;
-	};
-
-	gpio1_dbclk: gpio1_dbclk@1838 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1838>;
-	};
-
-	dcan1_sys_clk_mux: dcan1_sys_clk_mux@1888 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		ti,bit-shift = <24>;
-		reg = <0x1888>;
-	};
-
-	timer1_gfclk_mux: timer1_gfclk_mux@1840 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1840>;
-	};
-
-	uart10_gfclk_mux: uart10_gfclk_mux@1880 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1880>;
-	};
-};
-&cm_core_clocks {
-	dpll_pcie_ref_ck: dpll_pcie_ref_ck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin1>;
-		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
-	};
-
-	dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck@210 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_pcie_ref_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0210>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 {
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_pcie_ref_m2ldo_ck>, <&pciesref_acs_clk_ck>;
-		#clock-cells = <0>;
-		reg = <0x021c 0x4>;
-		ti,bit-shift = <7>;
-	};
-
-	apll_pcie_ck: apll_pcie_ck@21c {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-apll-clock";
-		clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
-		reg = <0x021c>, <0x0220>;
-	};
-
-	optfclk_pciephy1_32khz: optfclk_pciephy1_32khz@4a0093b0 {
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		#clock-cells = <0>;
-		reg = <0x13b0>;
-		ti,bit-shift = <8>;
-	};
-
-	optfclk_pciephy2_32khz: optfclk_pciephy2_32khz@4a0093b8 {
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		#clock-cells = <0>;
-		reg = <0x13b8>;
-		ti,bit-shift = <8>;
-	};
-
-	optfclk_pciephy_div: optfclk_pciephy_div@4a00821c {
-		compatible = "ti,divider-clock";
-		clocks = <&apll_pcie_ck>;
-		#clock-cells = <0>;
-		reg = <0x021c>;
-		ti,dividers = <2>, <1>;
-		ti,bit-shift = <8>;
-		ti,max-div = <2>;
-	};
-
-	optfclk_pciephy1_clk: optfclk_pciephy1_clk@4a0093b0 {
-		compatible = "ti,gate-clock";
-		clocks = <&apll_pcie_ck>;
-		#clock-cells = <0>;
-		reg = <0x13b0>;
-		ti,bit-shift = <9>;
-	};
-
-	optfclk_pciephy2_clk: optfclk_pciephy2_clk@4a0093b8 {
-		compatible = "ti,gate-clock";
-		clocks = <&apll_pcie_ck>;
-		#clock-cells = <0>;
-		reg = <0x13b8>;
-		ti,bit-shift = <9>;
-	};
-
-	optfclk_pciephy1_div_clk: optfclk_pciephy1_div_clk@4a0093b0 {
-		compatible = "ti,gate-clock";
-		clocks = <&optfclk_pciephy_div>;
-		#clock-cells = <0>;
-		reg = <0x13b0>;
-		ti,bit-shift = <10>;
-	};
-
-	optfclk_pciephy2_div_clk: optfclk_pciephy2_div_clk@4a0093b8 {
-		compatible = "ti,gate-clock";
-		clocks = <&optfclk_pciephy_div>;
-		#clock-cells = <0>;
-		reg = <0x13b8>;
-		ti,bit-shift = <10>;
-	};
-
-	apll_pcie_clkvcoldo: apll_pcie_clkvcoldo {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&apll_pcie_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	apll_pcie_clkvcoldo_div: apll_pcie_clkvcoldo_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&apll_pcie_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	apll_pcie_m2_ck: apll_pcie_m2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&apll_pcie_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_per_byp_mux: dpll_per_byp_mux@14c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x014c>;
-	};
-
-	dpll_per_ck: dpll_per_ck@140 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_per_byp_mux>;
-		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
-	};
-
-	dpll_per_m2_ck: dpll_per_m2_ck@150 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	func_96m_aon_dclk_div: func_96m_aon_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_usb_byp_mux: dpll_usb_byp_mux@18c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x018c>;
-	};
-
-	dpll_usb_ck: dpll_usb_ck@180 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-j-type-clock";
-		clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>;
-		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
-	};
-
-	dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_usb_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0190>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck@210 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_pcie_ref_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0210>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_x2_ck: dpll_per_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_per_ck>;
-	};
-
-	dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0158>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x015c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_h13x2_ck: dpll_per_h13x2_ck@160 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0160>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0164>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_usb_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	func_128m_clk: func_128m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_h11x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	func_12m_fclk: func_12m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	func_24m_clk: func_24m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	func_48m_fclk: func_48m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	func_96m_fclk: func_96m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l3init_60m_fclk: l3init_60m_fclk@104 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_usb_m2_ck>;
-		reg = <0x0104>;
-		ti,dividers = <1>, <8>;
-	};
-
-	clkout2_clk: clkout2_clk@6b0 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkoutmux2_clk_mux>;
-		ti,bit-shift = <8>;
-		reg = <0x06b0>;
-	};
-
-	l3init_960m_gfclk: l3init_960m_gfclk@6c0 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_usb_clkdcoldo>;
-		ti,bit-shift = <8>;
-		reg = <0x06c0>;
-	};
-
-	dss_32khz_clk: dss_32khz_clk@1120 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <11>;
-		reg = <0x1120>;
-	};
-
-	dss_48mhz_clk: dss_48mhz_clk@1120 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_48m_fclk>;
-		ti,bit-shift = <9>;
-		reg = <0x1120>;
-	};
-
-	dss_dss_clk: dss_dss_clk@1120 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_h12x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1120>;
-		ti,set-rate-parent;
-	};
-
-	dss_hdmi_clk: dss_hdmi_clk@1120 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&hdmi_dpll_clk_mux>;
-		ti,bit-shift = <10>;
-		reg = <0x1120>;
-	};
-
-	dss_video1_clk: dss_video1_clk@1120 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&video1_dpll_clk_mux>;
-		ti,bit-shift = <12>;
-		reg = <0x1120>;
-	};
-
-	dss_video2_clk: dss_video2_clk@1120 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&video2_dpll_clk_mux>;
-		ti,bit-shift = <13>;
-		reg = <0x1120>;
-	};
-
-	gpio2_dbclk: gpio2_dbclk@1760 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1760>;
-	};
-
-	gpio3_dbclk: gpio3_dbclk@1768 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1768>;
-	};
-
-	gpio4_dbclk: gpio4_dbclk@1770 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1770>;
-	};
-
-	gpio5_dbclk: gpio5_dbclk@1778 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1778>;
-	};
-
-	gpio6_dbclk: gpio6_dbclk@1780 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1780>;
-	};
-
-	gpio7_dbclk: gpio7_dbclk@1810 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1810>;
-	};
-
-	gpio8_dbclk: gpio8_dbclk@1818 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1818>;
-	};
-
-	mmc1_clk32k: mmc1_clk32k@1328 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1328>;
-	};
-
-	mmc2_clk32k: mmc2_clk32k@1330 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1330>;
-	};
-
-	mmc3_clk32k: mmc3_clk32k@1820 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1820>;
-	};
-
-	mmc4_clk32k: mmc4_clk32k@1828 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1828>;
-	};
-
-	sata_ref_clk: sata_ref_clk@1388 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_clkin1>;
-		ti,bit-shift = <8>;
-		reg = <0x1388>;
-	};
-
-	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m@13f0 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3init_960m_gfclk>;
-		ti,bit-shift = <8>;
-		reg = <0x13f0>;
-	};
-
-	usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m@1340 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3init_960m_gfclk>;
-		ti,bit-shift = <8>;
-		reg = <0x1340>;
-	};
-
-	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@640 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0640>;
-	};
-
-	usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k@688 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0688>;
-	};
-
-	usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k@698 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0698>;
-	};
-
-	atl_dpll_clk_mux: atl_dpll_clk_mux@c00 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_32k_ck>, <&video1_clkin_ck>, <&video2_clkin_ck>, <&hdmi_clkin_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0c00>;
-	};
-
-	atl_gfclk_mux: atl_gfclk_mux@c00 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_iclk_div>, <&dpll_abe_m2_ck>, <&atl_dpll_clk_mux>;
-		ti,bit-shift = <26>;
-		reg = <0x0c00>;
-	};
-
-	rmii_50mhz_clk_mux: rmii_50mhz_clk_mux@13d0 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_gmac_h11x2_ck>, <&rmii_clk_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x13d0>;
-	};
-
-	gmac_rft_clk_mux: gmac_rft_clk_mux@13d0 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&video1_clkin_ck>, <&video2_clkin_ck>, <&dpll_abe_m2_ck>, <&hdmi_clkin_ck>, <&l3_iclk_div>;
-		ti,bit-shift = <25>;
-		reg = <0x13d0>;
-	};
-
-	gpu_core_gclk_mux: gpu_core_gclk_mux@1220 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1220>;
-		assigned-clocks = <&gpu_core_gclk_mux>;
-		assigned-clock-parents = <&dpll_gpu_m2_ck>;
-	};
-
-	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1220 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
-		ti,bit-shift = <26>;
-		reg = <0x1220>;
-		assigned-clocks = <&gpu_hyd_gclk_mux>;
-		assigned-clock-parents = <&dpll_gpu_m2_ck>;
-	};
-
-	l3instr_ts_gclk_div: l3instr_ts_gclk_div@e50 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&wkupaon_iclk_mux>;
-		ti,bit-shift = <24>;
-		reg = <0x0e50>;
-		ti,dividers = <8>, <16>, <32>;
-	};
-
-	mcasp2_ahclkr_mux: mcasp2_ahclkr_mux@1860 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <28>;
-		reg = <0x1860>;
-	};
-
-	mcasp2_ahclkx_mux: mcasp2_ahclkx_mux@1860 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1860>;
-	};
-
-	mcasp2_aux_gfclk_mux: mcasp2_aux_gfclk_mux@1860 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x1860>;
-	};
-
-	mcasp3_ahclkx_mux: mcasp3_ahclkx_mux@1868 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1868>;
-	};
-
-	mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux@1868 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x1868>;
-	};
-
-	mcasp4_ahclkx_mux: mcasp4_ahclkx_mux@1898 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1898>;
-	};
-
-	mcasp4_aux_gfclk_mux: mcasp4_aux_gfclk_mux@1898 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x1898>;
-	};
-
-	mcasp5_ahclkx_mux: mcasp5_ahclkx_mux@1878 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1878>;
-	};
-
-	mcasp5_aux_gfclk_mux: mcasp5_aux_gfclk_mux@1878 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x1878>;
-	};
-
-	mcasp6_ahclkx_mux: mcasp6_ahclkx_mux@1904 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1904>;
-	};
-
-	mcasp6_aux_gfclk_mux: mcasp6_aux_gfclk_mux@1904 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x1904>;
-	};
-
-	mcasp7_ahclkx_mux: mcasp7_ahclkx_mux@1908 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1908>;
-	};
-
-	mcasp7_aux_gfclk_mux: mcasp7_aux_gfclk_mux@1908 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x1908>;
-	};
-
-	mcasp8_ahclkx_mux: mcasp8_ahclkx_mux@1890 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <22>;
-		reg = <0x1890>;
-	};
-
-	mcasp8_aux_gfclk_mux: mcasp8_aux_gfclk_mux@1890 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <24>;
-		reg = <0x1890>;
-	};
-
-	mmc1_fclk_mux: mmc1_fclk_mux@1328 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1328>;
-	};
-
-	mmc1_fclk_div: mmc1_fclk_div@1328 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mmc1_fclk_mux>;
-		ti,bit-shift = <25>;
-		ti,max-div = <4>;
-		reg = <0x1328>;
-		ti,index-power-of-two;
-	};
-
-	mmc2_fclk_mux: mmc2_fclk_mux@1330 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1330>;
-	};
-
-	mmc2_fclk_div: mmc2_fclk_div@1330 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mmc2_fclk_mux>;
-		ti,bit-shift = <25>;
-		ti,max-div = <4>;
-		reg = <0x1330>;
-		ti,index-power-of-two;
-	};
-
-	mmc3_gfclk_mux: mmc3_gfclk_mux@1820 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1820>;
-	};
-
-	mmc3_gfclk_div: mmc3_gfclk_div@1820 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mmc3_gfclk_mux>;
-		ti,bit-shift = <25>;
-		ti,max-div = <4>;
-		reg = <0x1820>;
-		ti,index-power-of-two;
-	};
-
-	mmc4_gfclk_mux: mmc4_gfclk_mux@1828 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1828>;
-	};
-
-	mmc4_gfclk_div: mmc4_gfclk_div@1828 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mmc4_gfclk_mux>;
-		ti,bit-shift = <25>;
-		ti,max-div = <4>;
-		reg = <0x1828>;
-		ti,index-power-of-two;
-	};
-
-	qspi_gfclk_mux: qspi_gfclk_mux@1838 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_128m_clk>, <&dpll_per_h13x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1838>;
-	};
-
-	qspi_gfclk_div: qspi_gfclk_div@1838 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&qspi_gfclk_mux>;
-		ti,bit-shift = <25>;
-		ti,max-div = <4>;
-		reg = <0x1838>;
-		ti,index-power-of-two;
-	};
-
-	timer10_gfclk_mux: timer10_gfclk_mux@1728 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1728>;
-	};
-
-	timer11_gfclk_mux: timer11_gfclk_mux@1730 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1730>;
-	};
-
-	timer13_gfclk_mux: timer13_gfclk_mux@17c8 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x17c8>;
-	};
-
-	timer14_gfclk_mux: timer14_gfclk_mux@17d0 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x17d0>;
-	};
-
-	timer15_gfclk_mux: timer15_gfclk_mux@17d8 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x17d8>;
-	};
-
-	timer16_gfclk_mux: timer16_gfclk_mux@1830 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1830>;
-	};
-
-	timer2_gfclk_mux: timer2_gfclk_mux@1738 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1738>;
-	};
-
-	timer3_gfclk_mux: timer3_gfclk_mux@1740 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1740>;
-	};
-
-	timer4_gfclk_mux: timer4_gfclk_mux@1748 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1748>;
-	};
-
-	timer9_gfclk_mux: timer9_gfclk_mux@1750 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1750>;
-	};
-
-	uart1_gfclk_mux: uart1_gfclk_mux@1840 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1840>;
-	};
-
-	uart2_gfclk_mux: uart2_gfclk_mux@1848 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1848>;
-	};
-
-	uart3_gfclk_mux: uart3_gfclk_mux@1850 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1850>;
-	};
-
-	uart4_gfclk_mux: uart4_gfclk_mux@1858 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1858>;
-	};
-
-	uart5_gfclk_mux: uart5_gfclk_mux@1870 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1870>;
-	};
-
-	uart7_gfclk_mux: uart7_gfclk_mux@18d0 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x18d0>;
-	};
-
-	uart8_gfclk_mux: uart8_gfclk_mux@18e0 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x18e0>;
-	};
-
-	uart9_gfclk_mux: uart9_gfclk_mux@18e8 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x18e8>;
-	};
-
-	vip1_gclk_mux: vip1_gclk_mux@1020 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1020>;
-	};
-
-	vip2_gclk_mux: vip2_gclk_mux@1028 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1028>;
-	};
-
-	vip3_gclk_mux: vip3_gclk_mux@1030 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1030>;
-	};
-};
-
-&cm_core_clockdomains {
-	coreaon_clkdm: coreaon_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll_usb_ck>;
-	};
-};
-
-&scm_conf_clocks {
-	dss_deshdcp_clk: dss_deshdcp_clk@558 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3_iclk_div>;
-		ti,bit-shift = <0>;
-		reg = <0x558>;
-	};
-
-       ehrpwm0_tbclk: ehrpwm0_tbclk@558 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4_root_clk_div>;
-		ti,bit-shift = <20>;
-		reg = <0x0558>;
-	};
-
-	ehrpwm1_tbclk: ehrpwm1_tbclk@558 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4_root_clk_div>;
-		ti,bit-shift = <21>;
-		reg = <0x0558>;
-	};
-
-	ehrpwm2_tbclk: ehrpwm2_tbclk@558 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4_root_clk_div>;
-		ti,bit-shift = <22>;
-		reg = <0x0558>;
-	};
-
-	sys_32k_ck: sys_32k_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x6c4>;
-	};
-};
diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts
deleted file mode 100644
index c15e7e0c7e08..000000000000
--- a/arch/arm/boot/dts/ecx-2000.dts
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Copyright 2011-2012 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/dts-v1/;
-
-/* First 4KB has pen for secondary cores. */
-/memreserve/ 0x00000000 0x0001000;
-
-/ {
-	model = "Calxeda ECX-2000";
-	compatible = "calxeda,ecx-2000";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	clock-ranges;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <0>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <1>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-
-		cpu@2 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <2>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-
-		cpu@3 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <3>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-	};
-
-	memory@0 {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000 0xff800000>;
-	};
-
-	memory@200000000 {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x00000002 0x00000000 0x00000003 0x00000000>;
-	};
-
-	soc {
-		ranges = <0x00000000 0x00000000 0x00000000 0xffffffff>;
-
-		timer {
-			compatible = "arm,cortex-a15-timer", "arm,armv7-timer"; 			interrupts = <1 13 0xf08>,
-				<1 14 0xf08>,
-				<1 11 0xf08>,
-				<1 10 0xf08>;
-		};
-
-		memory-controller@fff00000 {
-			compatible = "calxeda,ecx-2000-ddr-ctrl";
-			reg = <0xfff00000 0x1000>;
-			interrupts = <0 91 4>;
-		};
-
-		intc: interrupt-controller@fff11000 {
-			compatible = "arm,cortex-a15-gic";
-			#interrupt-cells = <3>;
-			#size-cells = <0>;
-			#address-cells = <1>;
-			interrupt-controller;
-			interrupts = <1 9 0xf04>;
-			reg = <0xfff11000 0x1000>,
-			      <0xfff12000 0x2000>,
-			      <0xfff14000 0x2000>,
-			      <0xfff16000 0x2000>;
-		};
-
-		pmu {
-			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 76 4  0 75 4  0 74 4  0 73 4>;
-		};
-	};
-};
-
-/include/ "ecx-common.dtsi"
diff --git a/arch/arm/boot/dts/efm32gg-dk3750.dts b/arch/arm/boot/dts/efm32gg-dk3750.dts
deleted file mode 100644
index 98fc667d22c7..000000000000
--- a/arch/arm/boot/dts/efm32gg-dk3750.dts
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Device tree for EFM32GG-DK3750 development board.
- *
- * Documentation available from
- * http://www.silabs.com/Support%20Documents/TechnicalDocs/efm32gg-dk3750-ug.pdf
- */
-
-/dts-v1/;
-#include "efm32gg.dtsi"
-
-/ {
-	model = "Energy Micro Giant Gecko Development Kit";
-	compatible = "efm32,dk3750";
-
-	chosen {
-		bootargs = "console=ttyefm4,115200 init=/linuxrc ignore_loglevel ihash_entries=64 dhash_entries=64 earlyprintk uclinux.physaddr=0x8c400000 root=/dev/mtdblock0";
-	};
-
-	memory@88000000 {
-		device_type = "memory";
-		reg = <0x88000000 0x400000>;
-	};
-
-	soc {
-		adc@40002000 {
-			status = "ok";
-		};
-
-		i2c@4000a000 {
-			energymicro,location = <3>;
-			status = "ok";
-
-			temp@48 {
-				compatible = "st,stds75";
-				reg = <0x48>;
-			};
-
-			eeprom@50 {
-				compatible = "microchip,24c02";
-				reg = <0x50>;
-				pagesize = <16>;
-			};
-		};
-
-		spi0: spi@4000c000 { /* USART0 */
-			cs-gpios = <&gpio 68 1>; // E4
-			energymicro,location = <1>;
-			status = "ok";
-
-			microsd@0 {
-				compatible = "mmc-spi-slot";
-				spi-max-frequency = <100000>;
-				voltage-ranges = <3200 3400>;
-				broken-cd;
-				reg = <0>;
-			};
-		};
-
-		spi1: spi@4000c400 { /* USART1 */
-			cs-gpios = <&gpio 51 1>; // D3
-			energymicro,location = <1>;
-			status = "ok";
-
-			ks8851@0 {
-				compatible = "ks8851";
-				spi-max-frequency = <6000000>;
-				reg = <0>;
-				interrupt-parent = <&boardfpga>;
-				interrupts = <4>;
-			};
-		};
-
-		uart4: uart@4000e400 { /* UART1 */
-			energymicro,location = <2>;
-			status = "ok";
-		};
-
-		boardfpga: boardfpga@80000000 {
-			compatible = "efm32board";
-			reg = <0x80000000 0x400>;
-			irq-gpios = <&gpio 64 1>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			status = "ok";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/efm32gg.dtsi b/arch/arm/boot/dts/efm32gg.dtsi
deleted file mode 100644
index b78c57e51ed5..000000000000
--- a/arch/arm/boot/dts/efm32gg.dtsi
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * Device tree for Energy Micro EFM32 Giant Gecko SoC.
- *
- * Documentation available from
- * http://www.silabs.com/Support%20Documents/TechnicalDocs/EFM32GG-RM.pdf
- */
-
-#include "armv7-m.dtsi"
-#include "dt-bindings/clock/efm32-cmu.h"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		spi0 = &spi0;
-		spi1 = &spi1;
-		spi2 = &spi2;
-	};
-
-	soc {
-		adc: adc@40002000 {
-			compatible = "energymicro,efm32-adc";
-			reg = <0x40002000 0x400>;
-			interrupts = <7>;
-			clocks = <&cmu clk_HFPERCLKADC0>;
-			status = "disabled";
-		};
-
-		gpio: gpio@40006000 {
-			compatible = "energymicro,efm32-gpio";
-			reg = <0x40006000 0x1000>;
-			interrupts = <1 11>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			clocks = <&cmu clk_HFPERCLKGPIO>;
-			status = "ok";
-		};
-
-		i2c0: i2c@4000a000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "energymicro,efm32-i2c";
-			reg = <0x4000a000 0x400>;
-			interrupts = <9>;
-			clocks = <&cmu clk_HFPERCLKI2C0>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@4000a400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "energymicro,efm32-i2c";
-			reg = <0x4000a400 0x400>;
-			interrupts = <10>;
-			clocks = <&cmu clk_HFPERCLKI2C1>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
-		spi0: spi@4000c000 { /* USART0 */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "energymicro,efm32-spi";
-			reg = <0x4000c000 0x400>;
-			interrupts = <3 4>;
-			clocks = <&cmu clk_HFPERCLKUSART0>;
-			status = "disabled";
-		};
-
-		spi1: spi@4000c400 { /* USART1 */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "energymicro,efm32-spi";
-			reg = <0x4000c400 0x400>;
-			interrupts = <15 16>;
-			clocks = <&cmu clk_HFPERCLKUSART1>;
-			status = "disabled";
-		};
-
-		spi2: spi@4000c800 { /* USART2 */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "energymicro,efm32-spi";
-			reg = <0x4000c800 0x400>;
-			interrupts = <18 19>;
-			clocks = <&cmu clk_HFPERCLKUSART2>;
-			status = "disabled";
-		};
-
-		uart0: uart@4000c000 { /* USART0 */
-			compatible = "energymicro,efm32-uart";
-			reg = <0x4000c000 0x400>;
-			interrupts = <3 4>;
-			clocks = <&cmu clk_HFPERCLKUSART0>;
-			status = "disabled";
-		};
-
-		uart1: uart@4000c400 { /* USART1 */
-			compatible = "energymicro,efm32-uart";
-			reg = <0x4000c400 0x400>;
-			interrupts = <15 16>;
-			clocks = <&cmu clk_HFPERCLKUSART1>;
-			status = "disabled";
-		};
-
-		uart2: uart@4000c800 { /* USART2 */
-			compatible = "energymicro,efm32-uart";
-			reg = <0x4000c800 0x400>;
-			interrupts = <18 19>;
-			clocks = <&cmu clk_HFPERCLKUSART2>;
-			status = "disabled";
-		};
-
-		uart3: uart@4000e000 { /* UART0 */
-			compatible = "energymicro,efm32-uart";
-			reg = <0x4000e000 0x400>;
-			interrupts = <20 21>;
-			clocks = <&cmu clk_HFPERCLKUART0>;
-			status = "disabled";
-		};
-
-		uart4: uart@4000e400 { /* UART1 */
-			compatible = "energymicro,efm32-uart";
-			reg = <0x4000e400 0x400>;
-			interrupts = <22 23>;
-			clocks = <&cmu clk_HFPERCLKUART1>;
-			status = "disabled";
-		};
-
-		timer0: timer@40010000 {
-			compatible = "energymicro,efm32-timer";
-			reg = <0x40010000 0x400>;
-			interrupts = <2>;
-			clocks = <&cmu clk_HFPERCLKTIMER0>;
-		};
-
-		timer1: timer@40010400 {
-			compatible = "energymicro,efm32-timer";
-			reg = <0x40010400 0x400>;
-			interrupts = <12>;
-			clocks = <&cmu clk_HFPERCLKTIMER1>;
-		};
-
-		timer2: timer@40010800 {
-			compatible = "energymicro,efm32-timer";
-			reg = <0x40010800 0x400>;
-			interrupts = <13>;
-			clocks = <&cmu clk_HFPERCLKTIMER2>;
-		};
-
-		timer3: timer@40010c00 {
-			compatible = "energymicro,efm32-timer";
-			reg = <0x40010c00 0x400>;
-			interrupts = <14>;
-			clocks = <&cmu clk_HFPERCLKTIMER3>;
-		};
-
-		cmu: cmu@400c8000 {
-			compatible = "efm32gg,cmu";
-			reg = <0x400c8000 0x400>;
-			interrupts = <32>;
-			#clock-cells = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/ep7211.dtsi b/arch/arm/boot/dts/ep7211.dtsi
deleted file mode 100644
index e438f6db0673..000000000000
--- a/arch/arm/boot/dts/ep7211.dtsi
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- */
-
-#include "ep7209.dtsi"
-
-/ {
-	model = "Cirrus Logic EP7211";
-	compatible = "cirrus,ep7211", "cirrus,ep7209";
-};
diff --git a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi
deleted file mode 100644
index 25186ac4188d..000000000000
--- a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Samsung's Exynos SoC MFC (Video Codec) reserved memory common definition.
- *
- * Copyright (c) 2016 Samsung Electronics Co., Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/ {
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		mfc_left: region_mfc_left {
-			compatible = "shared-dma-pool";
-			no-map;
-			size = <0x2400000>;
-			alignment = <0x100000>;
-		};
-
-		mfc_right: region_mfc_right {
-			compatible = "shared-dma-pool";
-			no-map;
-			size = <0x800000>;
-			alignment = <0x100000>;
-		};
-	};
-};
-
-&mfc {
-	memory-region = <&mfc_left>, <&mfc_right>;
-};
diff --git a/arch/arm/boot/dts/exynos-syscon-restart.dtsi b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
deleted file mode 100644
index 09a2040054ed..000000000000
--- a/arch/arm/boot/dts/exynos-syscon-restart.dtsi
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Samsung's Exynos SoC syscon reboot/poweroff nodes common definition.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/ {
-	soc {
-		compatible = "simple-bus";
-
-		poweroff: syscon-poweroff {
-			compatible = "syscon-poweroff";
-			regmap = <&pmu_system_controller>;
-			offset = <0x330C>; /* PS_HOLD_CONTROL */
-			mask = <0x5200>; /* reset value */
-		};
-
-		reboot: syscon-reboot {
-			compatible = "syscon-reboot";
-			regmap = <&pmu_system_controller>;
-			offset = <0x0400>; /* SWRESET */
-			mask = <0x1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
deleted file mode 100644
index 4bd2ee87124e..000000000000
--- a/arch/arm/boot/dts/exynos3250-artik5-eval.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Samsung's Exynos3250 based ARTIK5 evaluation board device tree source
- *
- * Copyright (c) 2016 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's ARTIK5 evaluation board
- * which is based on Samsung Exynos3250 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include "exynos3250-artik5.dtsi"
-
-/ {
-	model = "Samsung ARTIK5 evaluation board";
-	compatible = "samsung,artik5-eval", "samsung,artik5",
-			"samsung,exynos3250", "samsung,exynos3";
-};
-
-&mshc_2 {
-	num-slots = <1>;
-	cap-sd-highspeed;
-	disable-wp;
-	vqmmc-supply = <&ldo3_reg>;
-	card-detect-delay = <200>;
-	clock-frequency = <100000000>;
-	max-frequency = <100000000>;
-	samsung,dw-mshc-ciu-div = <1>;
-	samsung,dw-mshc-sdr-timing = <0 1>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_cmd &sd2_clk &sd2_cd &sd2_bus1 &sd2_bus4>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
deleted file mode 100644
index 59c89d7662a8..000000000000
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ /dev/null
@@ -1,335 +0,0 @@
-/*
- * Samsung's Exynos3250 based ARTIK5 module device tree source
- *
- * Copyright (c) 2016 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's ARTIK5 module which is based on
- * Samsung Exynos3250 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "exynos3250.dtsi"
-#include <dt-bindings/clock/samsung,s2mps11.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "samsung,artik5", "samsung,exynos3250", "samsung,exynos3";
-
-	chosen {
-		stdout-path = &serial_2;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x1ff00000>;
-	};
-
-	firmware@0205f000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x0205f000 0x1000>;
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			cooling-maps {
-				map0 {
-					/* Corresponds to 500MHz */
-					cooling-device = <&cpu0 5 5>;
-				};
-				map1 {
-					/* Corresponds to 200MHz */
-					cooling-device = <&cpu0 8 8>;
-				};
-			};
-		};
-	};
-};
-
-&adc {
-	vdd-supply = <&ldo7_reg>;
-	assigned-clocks = <&cmu CLK_SCLK_TSADC>;
-	assigned-clock-rates = <6000000>;
-};
-
-&cpu0 {
-	cpu0-supply = <&buck2_reg>;
-};
-
-&i2c_0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <100000>;
-	status = "okay";
-
-	s2mps14_pmic@66 {
-		compatible = "samsung,s2mps14-pmic";
-		interrupt-parent = <&gpx3>;
-		interrupts = <5 IRQ_TYPE_NONE>;
-		reg = <0x66>;
-
-		s2mps14_osc: clocks {
-			compatible = "samsung,s2mps14-clk";
-			#clock-cells = <1>;
-			clock-output-names = "s2mps14_ap", "unused",
-				"s2mps14_bt";
-		};
-
-		regulators {
-			ldo1_reg: LDO1 {
-				/* VDD_ALIVE15x */
-				regulator-name = "VLDO1_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				/* VDDQM176 ~ VDDQM185 */
-				regulator-name = "VLDO2_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				/*
-				 * VDD1_E106 ~ VDD1_E111
-				 * DVDD_RTC_AP, DVDD_MMC2_AP
-				 */
-				regulator-name = "VLDO3_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo4_reg: LDO4 {
-				/*  AVDD_PLL1120 ~ AVDD_PLL11201 */
-				regulator-name = "VLDO4_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo5_reg: LDO5 {
-				/* VDDI_PLL_ISO141 ~ VDDI_PLL_ISO142 */
-				regulator-name = "VLDO5_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo6_reg: LDO6 {
-				/* VDD_USB, VDD10_HSIC */
-				regulator-name = "VLDO6_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: LDO7 {
-				/*
-				 * VDD18P, AVDD18_TS, AVDD18_HSIC, AVDD_PLL2,
-				 * AVDD_ADC, AVDD_ABB_0, M4S_VDD18
-				 */
-				regulator-name = "VLDO7_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo8_reg: LDO8 {
-				/* AVDD33_UOTG */
-				regulator-name = "VLDO8_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			ldo9_reg: LDO9 {
-				/* VDDQ_E86 ~ VDDQ_E105*/
-				regulator-name = "VLDO9_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "VLDO10_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			ldo11_reg: LDO11 {
-				/* VDD74 ~ VDD75 */
-				regulator-name = "VLDO11_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-			};
-
-			ldo12_reg: LDO12 {
-				/* VDD72 ~ VDD73 */
-				regulator-name = "VLDO12_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "VLDO13_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "VLDO14_2.7V";
-				regulator-min-microvolt = <2700000>;
-				regulator-max-microvolt = <2700000>;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "VLDO_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "VLDO16_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "VLDO17_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			ldo18_reg: LDO18 {
-				/* DVDD_MMC2_AP */
-				regulator-name = "VLDO18_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo19_reg: LDO19 {
-				regulator-name = "VLDO19_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo20_reg: LDO20 {
-				regulator-name = "VLDO20_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo21_reg: LDO21 {
-				regulator-name = "VLDO21_1.25V";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1250000>;
-			};
-
-			ldo22_reg: LDO22 {
-				regulator-name = "VLDO22_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			ldo23_reg: LDO23 {
-				/* Xi2c3_SDA/SCL, Xi2c7_SDA/SCL, WLAN_SDIO */
-				regulator-name = "VLDO23_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo24_reg: LDO24 {
-				regulator-name = "VLDO24_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			ldo25_reg: LDO25 {
-				regulator-name = "VLDO25_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			buck1_reg: BUCK1 {
-				/* VDD_MIF */
-				regulator-name = "VBUCK1_1.0V";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			buck2_reg: BUCK2 {
-				/* VDD_CPU */
-				regulator-name = "VBUCK2_1.2V";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			buck3_reg: BUCK3 {
-				/* VDD_G3D */
-				regulator-name = "VBUCK3_1.0V";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "VBUCK4_1.95V";
-				regulator-min-microvolt = <1950000>;
-				regulator-max-microvolt = <1950000>;
-				regulator-always-on;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "VBUCK5_1.35V";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&mshc_0 {
-	num-slots = <1>;
-	non-removable;
-	cap-mmc-highspeed;
-	card-detect-delay = <200>;
-	vmmc-supply = <&ldo12_reg>;
-	clock-frequency = <100000000>;
-	max-frequency = <100000000>;
-	samsung,dw-mshc-ciu-div = <1>;
-	samsung,dw-mshc-sdr-timing = <0 1>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&rtc {
-	clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-	status = "okay";
-};
-
-&tmu {
-	status = "okay";
-};
-
-&xusbxti {
-	clock-frequency = <24000000>;
-};
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
deleted file mode 100644
index 590ee442d0ae..000000000000
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ /dev/null
@@ -1,919 +0,0 @@
-/*
- * Samsung's Exynos3250 SoC device tree source
- *
- * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos3250 SoC. As device tree coverage for Exynos3250 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "exynos4-cpu-thermal.dtsi"
-#include "exynos-syscon-restart.dtsi"
-#include <dt-bindings/clock/exynos3250.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "samsung,exynos3250";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		mshc0 = &mshc_0;
-		mshc1 = &mshc_1;
-		mshc2 = &mshc_2;
-		spi0 = &spi_0;
-		spi1 = &spi_1;
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-		i2c2 = &i2c_2;
-		i2c3 = &i2c_3;
-		i2c4 = &i2c_4;
-		i2c5 = &i2c_5;
-		i2c6 = &i2c_6;
-		i2c7 = &i2c_7;
-		serial0 = &serial_0;
-		serial1 = &serial_1;
-		serial2 = &serial_2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0>;
-			clock-frequency = <1000000000>;
-			clocks = <&cmu CLK_ARM_CLK>;
-			clock-names = "cpu";
-			#cooling-cells = <2>;
-
-			operating-points = <
-				1000000 1150000
-				900000  1112500
-				800000  1075000
-				700000  1037500
-				600000  1000000
-				500000  962500
-				400000  925000
-				300000  887500
-				200000  850000
-				100000  850000
-			>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <1>;
-			clock-frequency = <1000000000>;
-		};
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		fixed-rate-clocks {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			xusbxti: clock@0 {
-				compatible = "fixed-clock";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>;
-				clock-frequency = <0>;
-				#clock-cells = <0>;
-				clock-output-names = "xusbxti";
-			};
-
-			xxti: clock@1 {
-				compatible = "fixed-clock";
-				reg = <1>;
-				clock-frequency = <0>;
-				#clock-cells = <0>;
-				clock-output-names = "xxti";
-			};
-
-			xtcxo: clock@2 {
-				compatible = "fixed-clock";
-				reg = <2>;
-				clock-frequency = <0>;
-				#clock-cells = <0>;
-				clock-output-names = "xtcxo";
-			};
-		};
-
-		sysram@02020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x40000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x40000>;
-
-			smp-sysram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sysram@3f000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x3f000 0x1000>;
-			};
-		};
-
-		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
-			reg = <0x10000000 0x100>;
-		};
-
-		sys_reg: syscon@10010000 {
-			compatible = "samsung,exynos3-sysreg", "syscon";
-			reg = <0x10010000 0x400>;
-		};
-
-		pmu_system_controller: system-controller@10020000 {
-			compatible = "samsung,exynos3250-pmu", "syscon";
-			reg = <0x10020000 0x4000>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupt-parent = <&gic>;
-		};
-
-		mipi_phy: video-phy {
-			compatible = "samsung,s5pv210-mipi-video-phy";
-			#phy-cells = <1>;
-			syscon = <&pmu_system_controller>;
-		};
-
-		pd_cam: cam-power-domain@10023C00 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C00 0x20>;
-			#power-domain-cells = <0>;
-		};
-
-		pd_mfc: mfc-power-domain@10023C40 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C40 0x20>;
-			#power-domain-cells = <0>;
-		};
-
-		pd_g3d: g3d-power-domain@10023C60 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C60 0x20>;
-			#power-domain-cells = <0>;
-		};
-
-		pd_lcd0: lcd0-power-domain@10023C80 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C80 0x20>;
-			#power-domain-cells = <0>;
-		};
-
-		pd_isp: isp-power-domain@10023CA0 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023CA0 0x20>;
-			#power-domain-cells = <0>;
-		};
-
-		cmu: clock-controller@10030000 {
-			compatible = "samsung,exynos3250-cmu";
-			reg = <0x10030000 0x20000>;
-			#clock-cells = <1>;
-			assigned-clocks = <&cmu CLK_MOUT_ACLK_400_MCUISP_SUB>,
-					  <&cmu CLK_MOUT_ACLK_266_SUB>;
-			assigned-clock-parents = <&cmu CLK_FIN_PLL>,
-						 <&cmu CLK_FIN_PLL>;
-		};
-
-		cmu_dmc: clock-controller@105C0000 {
-			compatible = "samsung,exynos3250-cmu-dmc";
-			reg = <0x105C0000 0x2000>;
-			#clock-cells = <1>;
-		};
-
-		rtc: rtc@10070000 {
-			compatible = "samsung,s3c6410-rtc";
-			reg = <0x10070000 0x100>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&pmu_system_controller>;
-			status = "disabled";
-		};
-
-		tmu: tmu@100C0000 {
-			compatible = "samsung,exynos3250-tmu";
-			reg = <0x100C0000 0x100>;
-			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_TMU_APBIF>;
-			clock-names = "tmu_apbif";
-			#include "exynos4412-tmu-sensor-conf.dtsi"
-			status = "disabled";
-		};
-
-		gic: interrupt-controller@10481000 {
-			compatible = "arm,cortex-a15-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x10481000 0x1000>,
-			      <0x10482000 0x2000>,
-			      <0x10484000 0x2000>,
-			      <0x10486000 0x2000>;
-			interrupts = <GIC_PPI 9
-					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		};
-
-		mct@10050000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x10050000 0x800>;
-			interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-		};
-
-		pinctrl_1: pinctrl@11000000 {
-			compatible = "samsung,exynos3250-pinctrl";
-			reg = <0x11000000 0x1000>;
-			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-
-			wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		pinctrl_0: pinctrl@11400000 {
-			compatible = "samsung,exynos3250-pinctrl";
-			reg = <0x11400000 0x1000>;
-			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		jpeg: codec@11830000 {
-			compatible = "samsung,exynos3250-jpeg";
-			reg = <0x11830000 0x1000>;
-			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_JPEG>, <&cmu CLK_SCLK_JPEG>;
-			clock-names = "jpeg", "sclk";
-			power-domains = <&pd_cam>;
-			assigned-clocks = <&cmu CLK_MOUT_CAM_BLK>, <&cmu CLK_SCLK_JPEG>;
-			assigned-clock-rates = <0>, <150000000>;
-			assigned-clock-parents = <&cmu CLK_DIV_MPLL_PRE>;
-			iommus = <&sysmmu_jpeg>;
-			status = "disabled";
-		};
-
-		sysmmu_jpeg: sysmmu@11A60000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11a60000 0x1000>;
-			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "sysmmu", "master";
-			clocks = <&cmu CLK_SMMUJPEG>, <&cmu CLK_JPEG>;
-			power-domains = <&pd_cam>;
-			#iommu-cells = <0>;
-		};
-
-		fimd: fimd@11c00000 {
-			compatible = "samsung,exynos3250-fimd";
-			reg = <0x11c00000 0x30000>;
-			interrupt-names = "fifo", "vsync", "lcd_sys";
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
-			clock-names = "sclk_fimd", "fimd";
-			power-domains = <&pd_lcd0>;
-			iommus = <&sysmmu_fimd0>;
-			samsung,sysreg = <&sys_reg>;
-			status = "disabled";
-		};
-
-		dsi_0: dsi@11C80000 {
-			compatible = "samsung,exynos3250-mipi-dsi";
-			reg = <0x11C80000 0x10000>;
-			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-			samsung,phy-type = <0>;
-			power-domains = <&pd_lcd0>;
-			phys = <&mipi_phy 1>;
-			phy-names = "dsim";
-			clocks = <&cmu CLK_DSIM0>, <&cmu CLK_SCLK_MIPI0>;
-			clock-names = "bus_clk", "pll_clk";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		sysmmu_fimd0: sysmmu@11E20000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11e20000 0x1000>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "sysmmu", "master";
-			clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>;
-			power-domains = <&pd_lcd0>;
-			#iommu-cells = <0>;
-		};
-
-		hsotg: hsotg@12480000 {
-			compatible = "snps,dwc2";
-			reg = <0x12480000 0x20000>;
-			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_USBOTG>;
-			clock-names = "otg";
-			phys = <&exynos_usbphy 0>;
-			phy-names = "usb2-phy";
-			status = "disabled";
-		};
-
-		mshc_0: mshc@12510000 {
-			compatible = "samsung,exynos5420-dw-mshc";
-			reg = <0x12510000 0x1000>;
-			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mshc_1: mshc@12520000 {
-			compatible = "samsung,exynos5420-dw-mshc";
-			reg = <0x12520000 0x1000>;
-			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mshc_2: mshc@12530000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12530000 0x1000>;
-			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		exynos_usbphy: exynos-usbphy@125B0000 {
-			compatible = "samsung,exynos3250-usb2-phy";
-			reg = <0x125B0000 0x100>;
-			samsung,pmureg-phandle = <&pmu_system_controller>;
-			clocks = <&cmu CLK_USBOTG>, <&cmu CLK_SCLK_UPLL>;
-			clock-names = "phy", "ref";
-			#phy-cells = <1>;
-			status = "disabled";
-		};
-
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			pdma0: pdma@12680000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x12680000 0x1000>;
-				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cmu CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			pdma1: pdma@12690000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x12690000 0x1000>;
-				interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cmu CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-		};
-
-		adc: adc@126C0000 {
-			compatible = "samsung,exynos3250-adc",
-				     "samsung,exynos-adc-v2";
-			reg = <0x126C0000 0x100>;
-			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "adc", "sclk";
-			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
-			#io-channel-cells = <1>;
-			io-channel-ranges;
-			samsung,syscon-phandle = <&pmu_system_controller>;
-			status = "disabled";
-		};
-
-		mfc: codec@13400000 {
-			compatible = "samsung,mfc-v7";
-			reg = <0x13400000 0x10000>;
-			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "mfc", "sclk_mfc";
-			clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>;
-			power-domains = <&pd_mfc>;
-			iommus = <&sysmmu_mfc>;
-		};
-
-		sysmmu_mfc: sysmmu@13620000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13620000 0x1000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "sysmmu", "master";
-			clocks = <&cmu CLK_SMMUMFC_L>, <&cmu CLK_MFC>;
-			power-domains = <&pd_mfc>;
-			#iommu-cells = <0>;
-		};
-
-		serial_0: serial@13800000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x13800000 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
-			clock-names = "uart", "clk_uart_baud0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_data &uart0_fctl>;
-			status = "disabled";
-		};
-
-		serial_1: serial@13810000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x13810000 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
-			clock-names = "uart", "clk_uart_baud0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart1_data>;
-			status = "disabled";
-		};
-
-		serial_2: serial@13820000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x13820000 0x100>;
-			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
-			clock-names = "uart", "clk_uart_baud0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart2_data>;
-			status = "disabled";
-		};
-
-		i2c_0: i2c@13860000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13860000 0x100>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_I2C0>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_bus>;
-			status = "disabled";
-		};
-
-		i2c_1: i2c@13870000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13870000 0x100>;
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_I2C1>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_bus>;
-			status = "disabled";
-		};
-
-		i2c_2: i2c@13880000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13880000 0x100>;
-			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_I2C2>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_bus>;
-			status = "disabled";
-		};
-
-		i2c_3: i2c@13890000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13890000 0x100>;
-			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_I2C3>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c3_bus>;
-			status = "disabled";
-		};
-
-		i2c_4: i2c@138A0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138A0000 0x100>;
-			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_I2C4>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c4_bus>;
-			status = "disabled";
-		};
-
-		i2c_5: i2c@138B0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138B0000 0x100>;
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_I2C5>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c5_bus>;
-			status = "disabled";
-		};
-
-		i2c_6: i2c@138C0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138C0000 0x100>;
-			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_I2C6>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c6_bus>;
-			status = "disabled";
-		};
-
-		i2c_7: i2c@138D0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138D0000 0x100>;
-			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_I2C7>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c7_bus>;
-			status = "disabled";
-		};
-
-		spi_0: spi@13920000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x13920000 0x100>;
-			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma0 7>, <&pdma0 6>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>;
-			clock-names = "spi", "spi_busclk0";
-			samsung,spi-src-clk = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi0_bus>;
-			status = "disabled";
-		};
-
-		spi_1: spi@13930000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x13930000 0x100>;
-			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma1 7>, <&pdma1 6>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>;
-			clock-names = "spi", "spi_busclk0";
-			samsung,spi-src-clk = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_bus>;
-			status = "disabled";
-		};
-
-		i2s2: i2s@13970000 {
-			compatible = "samsung,s3c6410-i2s";
-			reg = <0x13970000 0x100>;
-			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cmu CLK_I2S>, <&cmu CLK_SCLK_I2S>;
-			clock-names = "iis", "i2s_opclk0";
-			dmas = <&pdma0 14>, <&pdma0 13>;
-			dma-names = "tx", "rx";
-			pinctrl-0 = <&i2s2_bus>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		pwm: pwm@139D0000 {
-			compatible = "samsung,exynos4210-pwm";
-			reg = <0x139D0000 0x1000>;
-			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		pmu {
-			compatible = "arm,cortex-a7-pmu";
-			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		ppmu_dmc0: ppmu_dmc0@106a0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x106a0000 0x2000>;
-			status = "disabled";
-		};
-
-		ppmu_dmc1: ppmu_dmc1@106b0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x106b0000 0x2000>;
-			status = "disabled";
-		};
-
-		ppmu_cpu: ppmu_cpu@106c0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x106c0000 0x2000>;
-			status = "disabled";
-		};
-
-		ppmu_rightbus: ppmu_rightbus@112a0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x112a0000 0x2000>;
-			clocks = <&cmu CLK_PPMURIGHT>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		ppmu_leftbus: ppmu_leftbus0@116a0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x116a0000 0x2000>;
-			clocks = <&cmu CLK_PPMULEFT>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		ppmu_camif: ppmu_camif@11ac0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x11ac0000 0x2000>;
-			clocks = <&cmu CLK_PPMUCAMIF>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		ppmu_lcd0: ppmu_lcd0@11e40000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x11e40000 0x2000>;
-			clocks = <&cmu CLK_PPMULCD0>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		ppmu_fsys: ppmu_fsys@12630000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x12630000 0x2000>;
-			clocks = <&cmu CLK_PPMUFILE>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		ppmu_g3d: ppmu_g3d@13220000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x13220000 0x2000>;
-			clocks = <&cmu CLK_PPMUG3D>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		ppmu_mfc: ppmu_mfc@13660000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x13660000 0x2000>;
-			clocks = <&cmu CLK_PPMUMFC_L>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		bus_dmc: bus_dmc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu_dmc CLK_DIV_DMC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			status = "disabled";
-		};
-
-		bus_dmc_opp_table: opp_table1 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-				opp-microvolt = <800000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				opp-microvolt = <800000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <800000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-				opp-microvolt = <825000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-				opp-microvolt = <875000>;
-			};
-		};
-
-		bus_leftbus: bus_leftbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_GDL>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_rightbus: bus_rightbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_GDR>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_lcd0: bus_lcd0 {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_160>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_fsys: bus_fsys {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_200>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mcuisp: bus_mcuisp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_mcuisp_opp_table>;
-			status = "disabled";
-		};
-
-		bus_isp: bus_isp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_266>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_isp_opp_table>;
-			status = "disabled";
-		};
-
-		bus_peril: bus_peril {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_100>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_peril_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mfc: bus_mfc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_SCLK_MFC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_leftbus_opp_table: opp_table2 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-80000000 {
-				opp-hz = /bits/ 64 <80000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				opp-microvolt = <1000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <1000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-				opp-microvolt = <1000000>;
-			};
-		};
-
-		bus_mcuisp_opp_table: opp_table3 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-80000000 {
-				opp-hz = /bits/ 64 <80000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-			};
-		};
-
-		bus_isp_opp_table: opp_table4 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-80000000 {
-				opp-hz = /bits/ 64 <80000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-			opp-300000000 {
-				opp-hz = /bits/ 64 <300000000>;
-			};
-		};
-
-		bus_peril_opp_table: opp_table5 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-80000000 {
-				opp-hz = /bits/ 64 <80000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-		};
-	};
-};
-
-#include "exynos3250-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
deleted file mode 100644
index 497a9470c888..000000000000
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ /dev/null
@@ -1,1011 +0,0 @@
-/*
- * Samsung's Exynos4 SoC series common device tree source
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2010-2011 Linaro Ltd.
- *		www.linaro.org
- *
- * Samsung's Exynos4 SoC series device nodes are listed in this file.  Particular
- * SoCs from Exynos4 series can include this file and provide values for SoCs
- * specfic bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4 SoCs. As device tree coverage for Exynos4 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/clock/exynos4.h>
-#include <dt-bindings/clock/exynos-audss-clk.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "exynos-syscon-restart.dtsi"
-
-/ {
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		spi0 = &spi_0;
-		spi1 = &spi_1;
-		spi2 = &spi_2;
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-		i2c2 = &i2c_2;
-		i2c3 = &i2c_3;
-		i2c4 = &i2c_4;
-		i2c5 = &i2c_5;
-		i2c6 = &i2c_6;
-		i2c7 = &i2c_7;
-		i2c8 = &i2c_8;
-		csis0 = &csis_0;
-		csis1 = &csis_1;
-		fimc0 = &fimc_0;
-		fimc1 = &fimc_1;
-		fimc2 = &fimc_2;
-		fimc3 = &fimc_3;
-		serial0 = &serial_0;
-		serial1 = &serial_1;
-		serial2 = &serial_2;
-		serial3 = &serial_3;
-	};
-
-	clock_audss: clock-controller@03810000 {
-		compatible = "samsung,exynos4210-audss-clock";
-		reg = <0x03810000 0x0C>;
-		#clock-cells = <1>;
-	};
-
-	i2s0: i2s@03830000 {
-		compatible = "samsung,s5pv210-i2s";
-		reg = <0x03830000 0x100>;
-		clocks = <&clock_audss EXYNOS_I2S_BUS>,
-			 <&clock_audss EXYNOS_DOUT_AUD_BUS>,
-			 <&clock_audss EXYNOS_SCLK_I2S>;
-		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-		#clock-cells = <1>;
-		clock-output-names = "i2s_cdclk0";
-		dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>;
-		dma-names = "tx", "rx", "tx-sec";
-		samsung,idma-addr = <0x03000000>;
-		#sound-dai-cells = <1>;
-		status = "disabled";
-	};
-
-	chipid@10000000 {
-		compatible = "samsung,exynos4210-chipid";
-		reg = <0x10000000 0x100>;
-	};
-
-	scu: snoop-control-unit@10500000 {
-		compatible = "arm,cortex-a9-scu";
-		reg = <0x10500000 0x2000>;
-	};
-
-	memory-controller@12570000 {
-		compatible = "samsung,exynos4210-srom";
-		reg = <0x12570000 0x14>;
-	};
-
-	mipi_phy: video-phy {
-		compatible = "samsung,s5pv210-mipi-video-phy";
-		#phy-cells = <1>;
-		syscon = <&pmu_system_controller>;
-	};
-
-	pd_mfc: mfc-power-domain@10023C40 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023C40 0x20>;
-		#power-domain-cells = <0>;
-		label = "MFC";
-	};
-
-	pd_g3d: g3d-power-domain@10023C60 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023C60 0x20>;
-		#power-domain-cells = <0>;
-		label = "G3D";
-	};
-
-	pd_lcd0: lcd0-power-domain@10023C80 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023C80 0x20>;
-		#power-domain-cells = <0>;
-		label = "LCD0";
-	};
-
-	pd_tv: tv-power-domain@10023C20 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023C20 0x20>;
-		#power-domain-cells = <0>;
-		power-domains = <&pd_lcd0>;
-		label = "TV";
-	};
-
-	pd_cam: cam-power-domain@10023C00 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023C00 0x20>;
-		#power-domain-cells = <0>;
-		label = "CAM";
-	};
-
-	pd_gps: gps-power-domain@10023CE0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023CE0 0x20>;
-		#power-domain-cells = <0>;
-		label = "GPS";
-	};
-
-	pd_gps_alive: gps-alive-power-domain@10023D00 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023D00 0x20>;
-		#power-domain-cells = <0>;
-		label = "GPS alive";
-	};
-
-	gic: interrupt-controller@10490000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x10490000 0x10000>, <0x10480000 0x10000>;
-	};
-
-	combiner: interrupt-controller@10440000 {
-		compatible = "samsung,exynos4210-combiner";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0x10440000 0x1000>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupt-parent = <&combiner>;
-		interrupts = <2 2>, <3 2>;
-	};
-
-	sys_reg: syscon@10010000 {
-		compatible = "samsung,exynos4-sysreg", "syscon";
-		reg = <0x10010000 0x400>;
-	};
-
-	pmu_system_controller: system-controller@10020000 {
-		compatible = "samsung,exynos4210-pmu", "syscon";
-		reg = <0x10020000 0x4000>;
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-	};
-
-	dsi_0: dsi@11C80000 {
-		compatible = "samsung,exynos4210-mipi-dsi";
-		reg = <0x11C80000 0x10000>;
-		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&pd_lcd0>;
-		phys = <&mipi_phy 1>;
-		phy-names = "dsim";
-		clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>;
-		clock-names = "bus_clk", "sclk_mipi";
-		status = "disabled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	camera {
-		compatible = "samsung,fimc", "simple-bus";
-		status = "disabled";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#clock-cells = <1>;
-		clock-output-names = "cam_a_clkout", "cam_b_clkout";
-		ranges;
-
-		fimc_0: fimc@11800000 {
-			compatible = "samsung,exynos4210-fimc";
-			reg = <0x11800000 0x1000>;
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>;
-			clock-names = "fimc", "sclk_fimc";
-			power-domains = <&pd_cam>;
-			samsung,sysreg = <&sys_reg>;
-			iommus = <&sysmmu_fimc0>;
-			status = "disabled";
-		};
-
-		fimc_1: fimc@11810000 {
-			compatible = "samsung,exynos4210-fimc";
-			reg = <0x11810000 0x1000>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>;
-			clock-names = "fimc", "sclk_fimc";
-			power-domains = <&pd_cam>;
-			samsung,sysreg = <&sys_reg>;
-			iommus = <&sysmmu_fimc1>;
-			status = "disabled";
-		};
-
-		fimc_2: fimc@11820000 {
-			compatible = "samsung,exynos4210-fimc";
-			reg = <0x11820000 0x1000>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>;
-			clock-names = "fimc", "sclk_fimc";
-			power-domains = <&pd_cam>;
-			samsung,sysreg = <&sys_reg>;
-			iommus = <&sysmmu_fimc2>;
-			status = "disabled";
-		};
-
-		fimc_3: fimc@11830000 {
-			compatible = "samsung,exynos4210-fimc";
-			reg = <0x11830000 0x1000>;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>;
-			clock-names = "fimc", "sclk_fimc";
-			power-domains = <&pd_cam>;
-			samsung,sysreg = <&sys_reg>;
-			iommus = <&sysmmu_fimc3>;
-			status = "disabled";
-		};
-
-		csis_0: csis@11880000 {
-			compatible = "samsung,exynos4210-csis";
-			reg = <0x11880000 0x4000>;
-			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>;
-			clock-names = "csis", "sclk_csis";
-			bus-width = <4>;
-			power-domains = <&pd_cam>;
-			phys = <&mipi_phy 0>;
-			phy-names = "csis";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		csis_1: csis@11890000 {
-			compatible = "samsung,exynos4210-csis";
-			reg = <0x11890000 0x4000>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>;
-			clock-names = "csis", "sclk_csis";
-			bus-width = <2>;
-			power-domains = <&pd_cam>;
-			phys = <&mipi_phy 2>;
-			phy-names = "csis";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	rtc: rtc@10070000 {
-		compatible = "samsung,s3c6410-rtc";
-		reg = <0x10070000 0x100>;
-		interrupt-parent = <&pmu_system_controller>;
-		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_RTC>;
-		clock-names = "rtc";
-		status = "disabled";
-	};
-
-	keypad: keypad@100A0000 {
-		compatible = "samsung,s5pv210-keypad";
-		reg = <0x100A0000 0x100>;
-		interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_KEYIF>;
-		clock-names = "keypad";
-		status = "disabled";
-	};
-
-	sdhci_0: sdhci@12510000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12510000 0x100>;
-		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
-		clock-names = "hsmmc", "mmc_busclk.2";
-		status = "disabled";
-	};
-
-	sdhci_1: sdhci@12520000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12520000 0x100>;
-		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
-		clock-names = "hsmmc", "mmc_busclk.2";
-		status = "disabled";
-	};
-
-	sdhci_2: sdhci@12530000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12530000 0x100>;
-		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
-		clock-names = "hsmmc", "mmc_busclk.2";
-		status = "disabled";
-	};
-
-	sdhci_3: sdhci@12540000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12540000 0x100>;
-		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
-		clock-names = "hsmmc", "mmc_busclk.2";
-		status = "disabled";
-	};
-
-	exynos_usbphy: exynos-usbphy@125B0000 {
-		compatible = "samsung,exynos4210-usb2-phy";
-		reg = <0x125B0000 0x100>;
-		samsung,pmureg-phandle = <&pmu_system_controller>;
-		clocks = <&clock CLK_USB_DEVICE>, <&clock CLK_XUSBXTI>;
-		clock-names = "phy", "ref";
-		#phy-cells = <1>;
-		status = "disabled";
-	};
-
-	hsotg: hsotg@12480000 {
-		compatible = "samsung,s3c6400-hsotg";
-		reg = <0x12480000 0x20000>;
-		interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_USB_DEVICE>;
-		clock-names = "otg";
-		phys = <&exynos_usbphy 0>;
-		phy-names = "usb2-phy";
-		status = "disabled";
-	};
-
-	ehci: ehci@12580000 {
-		compatible = "samsung,exynos4210-ehci";
-		reg = <0x12580000 0x100>;
-		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_USB_HOST>;
-		clock-names = "usbhost";
-		status = "disabled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			phys = <&exynos_usbphy 1>;
-			status = "disabled";
-		};
-		port@1 {
-			reg = <1>;
-			phys = <&exynos_usbphy 2>;
-			status = "disabled";
-		};
-		port@2 {
-			reg = <2>;
-			phys = <&exynos_usbphy 3>;
-			status = "disabled";
-		};
-	};
-
-	ohci: ohci@12590000 {
-		compatible = "samsung,exynos4210-ohci";
-		reg = <0x12590000 0x100>;
-		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_USB_HOST>;
-		clock-names = "usbhost";
-		status = "disabled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			phys = <&exynos_usbphy 1>;
-			status = "disabled";
-		};
-	};
-
-	i2s1: i2s@13960000 {
-		compatible = "samsung,s3c6410-i2s";
-		reg = <0x13960000 0x100>;
-		clocks = <&clock CLK_I2S1>;
-		clock-names = "iis";
-		#clock-cells = <1>;
-		clock-output-names = "i2s_cdclk1";
-		dmas = <&pdma1 12>, <&pdma1 11>;
-		dma-names = "tx", "rx";
-		#sound-dai-cells = <1>;
-		status = "disabled";
-	};
-
-	i2s2: i2s@13970000 {
-		compatible = "samsung,s3c6410-i2s";
-		reg = <0x13970000 0x100>;
-		clocks = <&clock CLK_I2S2>;
-		clock-names = "iis";
-		#clock-cells = <1>;
-		clock-output-names = "i2s_cdclk2";
-		dmas = <&pdma0 14>, <&pdma0 13>;
-		dma-names = "tx", "rx";
-		#sound-dai-cells = <1>;
-		status = "disabled";
-	};
-
-	mfc: codec@13400000 {
-		compatible = "samsung,mfc-v5";
-		reg = <0x13400000 0x10000>;
-		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&pd_mfc>;
-		clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
-		clock-names = "mfc", "sclk_mfc";
-		iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
-		iommu-names = "left", "right";
-	};
-
-	serial_0: serial@13800000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13800000 0x100>;
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-		dmas = <&pdma0 15>, <&pdma0 16>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	serial_1: serial@13810000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13810000 0x100>;
-		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-		clock-names = "uart", "clk_uart_baud0";
-		dmas = <&pdma1 15>, <&pdma1 16>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	serial_2: serial@13820000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13820000 0x100>;
-		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-		clock-names = "uart", "clk_uart_baud0";
-		dmas = <&pdma0 17>, <&pdma0 18>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	serial_3: serial@13830000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13830000 0x100>;
-		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
-		clock-names = "uart", "clk_uart_baud0";
-		dmas = <&pdma1 17>, <&pdma1 18>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c_0: i2c@13860000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13860000 0x100>;
-		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_I2C0>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_bus>;
-		status = "disabled";
-	};
-
-	i2c_1: i2c@13870000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13870000 0x100>;
-		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_I2C1>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_bus>;
-		status = "disabled";
-	};
-
-	i2c_2: i2c@13880000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13880000 0x100>;
-		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_I2C2>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_bus>;
-		status = "disabled";
-	};
-
-	i2c_3: i2c@13890000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13890000 0x100>;
-		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_I2C3>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c3_bus>;
-		status = "disabled";
-	};
-
-	i2c_4: i2c@138A0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138A0000 0x100>;
-		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_I2C4>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c4_bus>;
-		status = "disabled";
-	};
-
-	i2c_5: i2c@138B0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138B0000 0x100>;
-		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_I2C5>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c5_bus>;
-		status = "disabled";
-	};
-
-	i2c_6: i2c@138C0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138C0000 0x100>;
-		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_I2C6>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c6_bus>;
-		status = "disabled";
-	};
-
-	i2c_7: i2c@138D0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138D0000 0x100>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_I2C7>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c7_bus>;
-		status = "disabled";
-	};
-
-	i2c_8: i2c@138E0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-hdmiphy-i2c";
-		reg = <0x138E0000 0x100>;
-		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_I2C_HDMI>;
-		clock-names = "i2c";
-		status = "disabled";
-
-		hdmi_i2c_phy: hdmiphy@38 {
-			compatible = "exynos4210-hdmiphy";
-			reg = <0x38>;
-		};
-	};
-
-	spi_0: spi@13920000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x13920000 0x100>;
-		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-		dmas = <&pdma0 7>, <&pdma0 6>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi0_bus>;
-		status = "disabled";
-	};
-
-	spi_1: spi@13930000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x13930000 0x100>;
-		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-		dmas = <&pdma1 7>, <&pdma1 6>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi1_bus>;
-		status = "disabled";
-	};
-
-	spi_2: spi@13940000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x13940000 0x100>;
-		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-		dmas = <&pdma0 9>, <&pdma0 8>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_bus>;
-		status = "disabled";
-	};
-
-	pwm: pwm@139D0000 {
-		compatible = "samsung,exynos4210-pwm";
-		reg = <0x139D0000 0x1000>;
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_PWM>;
-		clock-names = "timers";
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		pdma0: pdma@12680000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x12680000 0x1000>;
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_PDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		pdma1: pdma@12690000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x12690000 0x1000>;
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_PDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		mdma1: mdma@12850000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x12850000 0x1000>;
-			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_MDMA>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
-		};
-	};
-
-	fimd: fimd@11c00000 {
-		compatible = "samsung,exynos4210-fimd";
-		interrupt-parent = <&combiner>;
-		reg = <0x11c00000 0x20000>;
-		interrupt-names = "fifo", "vsync", "lcd_sys";
-		interrupts = <11 0>, <11 1>, <11 2>;
-		clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
-		clock-names = "sclk_fimd", "fimd";
-		power-domains = <&pd_lcd0>;
-		iommus = <&sysmmu_fimd0>;
-		samsung,sysreg = <&sys_reg>;
-		status = "disabled";
-	};
-
-	tmu: tmu@100C0000 {
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
-
-	jpeg_codec: jpeg-codec@11840000 {
-		compatible = "samsung,exynos4210-jpeg";
-		reg = <0x11840000 0x1000>;
-		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_JPEG>;
-		clock-names = "jpeg";
-		power-domains = <&pd_cam>;
-		iommus = <&sysmmu_jpeg>;
-	};
-
-	rotator: rotator@12810000 {
-		compatible = "samsung,exynos4210-rotator";
-		reg = <0x12810000 0x64>;
-		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_ROTATOR>;
-		clock-names = "rotator";
-		iommus = <&sysmmu_rotator>;
-	};
-
-	hdmi: hdmi@12D00000 {
-		compatible = "samsung,exynos4210-hdmi";
-		reg = <0x12D00000 0x70000>;
-		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy",
-			"mout_hdmi";
-		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
-			<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
-			<&clock CLK_MOUT_HDMI>;
-		phy = <&hdmi_i2c_phy>;
-		power-domains = <&pd_tv>;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		status = "disabled";
-	};
-
-	hdmicec: cec@100B0000 {
-		compatible = "samsung,s5p-cec";
-		reg = <0x100B0000 0x200>;
-		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_HDMI_CEC>;
-		clock-names = "hdmicec";
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		hdmi-phandle = <&hdmi>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&hdmi_cec>;
-		status = "disabled";
-	};
-
-	mixer: mixer@12C10000 {
-		compatible = "samsung,exynos4210-mixer";
-		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-		reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
-		power-domains = <&pd_tv>;
-		iommus = <&sysmmu_tv>;
-		status = "disabled";
-	};
-
-	ppmu_dmc0: ppmu_dmc0@106a0000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x106a0000 0x2000>;
-		clocks = <&clock CLK_PPMUDMC0>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
-
-	ppmu_dmc1: ppmu_dmc1@106b0000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x106b0000 0x2000>;
-		clocks = <&clock CLK_PPMUDMC1>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
-
-	ppmu_cpu: ppmu_cpu@106c0000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x106c0000 0x2000>;
-		clocks = <&clock CLK_PPMUCPU>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
-
-	ppmu_acp: ppmu_acp@10ae0000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x106e0000 0x2000>;
-		status = "disabled";
-	};
-
-	ppmu_rightbus: ppmu_rightbus@112a0000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x112a0000 0x2000>;
-		clocks = <&clock CLK_PPMURIGHT>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
-
-	ppmu_leftbus: ppmu_leftbus0@116a0000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x116a0000 0x2000>;
-		clocks = <&clock CLK_PPMULEFT>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
-
-	ppmu_camif: ppmu_camif@11ac0000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x11ac0000 0x2000>;
-		clocks = <&clock CLK_PPMUCAMIF>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
-
-	ppmu_lcd0: ppmu_lcd0@11e40000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x11e40000 0x2000>;
-		clocks = <&clock CLK_PPMULCD0>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
-
-	ppmu_fsys: ppmu_g3d@12630000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x12630000 0x2000>;
-		status = "disabled";
-	};
-
-	ppmu_image: ppmu_image@12aa0000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x12aa0000 0x2000>;
-		clocks = <&clock CLK_PPMUIMAGE>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
-
-	ppmu_tv: ppmu_tv@12e40000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x12e40000 0x2000>;
-		clocks = <&clock CLK_PPMUTV>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
-
-	ppmu_g3d: ppmu_g3d@13220000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x13220000 0x2000>;
-		clocks = <&clock CLK_PPMUG3D>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
-
-	ppmu_mfc_left: ppmu_mfc_left@13660000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x13660000 0x2000>;
-		clocks = <&clock CLK_PPMUMFC_L>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
-
-	ppmu_mfc_right: ppmu_mfc_right@13670000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x13670000 0x2000>;
-		clocks = <&clock CLK_PPMUMFC_R>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
-
-	sysmmu_mfc_l: sysmmu@13620000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13620000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 5>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
-		power-domains = <&pd_mfc>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_mfc_r: sysmmu@13630000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13630000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 6>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
-		power-domains = <&pd_mfc>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_tv: sysmmu@12E20000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x12E20000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 4>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
-		power-domains = <&pd_tv>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_fimc0: sysmmu@11A20000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11A20000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMC0>, <&clock CLK_FIMC0>;
-		power-domains = <&pd_cam>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_fimc1: sysmmu@11A30000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11A30000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 3>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMC1>, <&clock CLK_FIMC1>;
-		power-domains = <&pd_cam>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_fimc2: sysmmu@11A40000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11A40000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 4>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMC2>, <&clock CLK_FIMC2>;
-		power-domains = <&pd_cam>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_fimc3: sysmmu@11A50000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11A50000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 5>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMC3>, <&clock CLK_FIMC3>;
-		power-domains = <&pd_cam>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_jpeg: sysmmu@11A60000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11A60000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 6>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
-		power-domains = <&pd_cam>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_rotator: sysmmu@12A30000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x12A30000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_fimd0: sysmmu@11E20000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11E20000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMD0>, <&clock CLK_FIMD0>;
-		power-domains = <&pd_lcd0>;
-		#iommu-cells = <0>;
-	};
-
-	sss: sss@10830000 {
-		compatible = "samsung,exynos4210-secss";
-		reg = <0x10830000 0x300>;
-		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_SSS>;
-		clock-names = "secss";
-	};
-
-	prng: rng@10830400 {
-		compatible = "samsung,exynos4-rng";
-		reg = <0x10830400 0x200>;
-		clocks = <&clock CLK_SSS>;
-		clock-names = "secss";
-	};
-};
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
deleted file mode 100644
index 084fcc5574ef..000000000000
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ /dev/null
@@ -1,330 +0,0 @@
-/*
- * Samsung's Exynos4210 based Origen board device tree source
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2010-2011 Linaro Ltd.
- *		www.linaro.org
- *
- * Device tree source file for Insignal's Origen board which is based on
- * Samsung's Exynos4210 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4210.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "exynos-mfc-reserved-memory.dtsi"
-
-/ {
-	model = "Insignal Origen evaluation board based on Exynos4210";
-	compatible = "insignal,origen", "samsung,exynos4210", "samsung,exynos4";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x10000000
-		       0x50000000 0x10000000
-		       0x60000000 0x10000000
-		       0x70000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
-		stdout-path = &serial_2;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mmc_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "VMEM_VDD_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		up {
-			label = "Up";
-			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_UP>;
-			wakeup-source;
-		};
-
-		down {
-			label = "Down";
-			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_DOWN>;
-			wakeup-source;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-			wakeup-source;
-		};
-
-		home {
-			label = "Home";
-			gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-			wakeup-source;
-		};
-
-		menu {
-			label = "Menu";
-			gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		status {
-			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: timing {
-			clock-frequency = <47500000>;
-			hactive = <1024>;
-			vactive = <600>;
-			hfront-porch = <64>;
-			hback-porch = <16>;
-			hsync-len = <48>;
-			vback-porch = <64>;
-			vfront-porch = <16>;
-			vsync-len = <3>;
-		};
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&buck1_reg>;
-};
-
-&fimd {
-	pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&i2c_0 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <20000>;
-	pinctrl-0 = <&i2c0_bus>;
-	pinctrl-names = "default";
-
-	max8997_pmic@66 {
-		compatible = "maxim,max8997-pmic";
-		reg = <0x66>;
-		interrupt-parent = <&gpx0>;
-		interrupts = <4 IRQ_TYPE_NONE>, <3 IRQ_TYPE_NONE>;
-
-		max8997,pmic-buck1-dvs-voltage = <1350000>;
-		max8997,pmic-buck2-dvs-voltage = <1100000>;
-		max8997,pmic-buck5-dvs-voltage = <1200000>;
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VDD_ABB_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VDD_ALIVE_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "VMIPI_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "VDD_RTC_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt	= <1800000>;
-				regulator-always-on;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "VMIPI_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt	= <1800000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "VDD_AUD_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt	= <1800000>;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "VADC_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt	= <3300000>;
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "DVDD_SWB_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt	= <2800000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "VDD_PLL_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt	= <1100000>;
-				regulator-always-on;
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "VDD_AUD_3V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt	= <3000000>;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "AVDD18_SWB_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt	= <1800000>;
-				regulator-always-on;
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "VDD_SWB_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt	= <3300000>;
-				regulator-always-on;
-			};
-
-			ldo21_reg: LDO21 {
-				regulator-name = "VDD_MIF_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt	= <1200000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				/*
-				* HACK: The real name is VDD_ARM_1.2V,
-				* but exynos-cpufreq does not support
-				* DT-based regulator lookup yet.
-				*/
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt	= <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "VDD_INT_1.1V";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt	= <1100000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "VDD_G3D_1.1V";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1100000>;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "VDDQ_M1M2_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "VDD_LCD_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&sdhci_0 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
-	pinctrl-names = "default";
-	vmmc-supply = <&mmc_reg>;
-	status = "okay";
-};
-
-&sdhci_2 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
-	pinctrl-names = "default";
-	vmmc-supply = <&mmc_reg>;
-	status = "okay";
-};
-
-&serial_0 {
-	status = "okay";
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
-
-&serial_3 {
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-};
-
-&tmu {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
deleted file mode 100644
index f280954b260a..000000000000
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ /dev/null
@@ -1,868 +0,0 @@
-/*
- * Samsung's Exynos4210 SoC pin-mux and pin-config device tree source
- *
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2011-2012 Linaro Ltd.
- *		www.linaro.org
- *
- * Samsung's Exynos4210 SoC pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <dt-bindings/pinctrl/samsung.h>
-
-/ {
-	pinctrl@11400000 {
-		gpa0: gpa0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa1: gpa1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb: gpb {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc0: gpc0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc1: gpc1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd0: gpd0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd1: gpd1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe0: gpe0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe1: gpe1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe2: gpe2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe3: gpe3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe4: gpe4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf0: gpf0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf1: gpf1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf2: gpf2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf3: gpf3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart0_data: uart0-data {
-			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart0_fctl: uart0-fctl {
-			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart1_data: uart1-data {
-			samsung,pins = "gpa0-4", "gpa0-5";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart1_fctl: uart1-fctl {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		i2c2_bus: i2c2-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart2_data: uart2-data {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart2_fctl: uart2-fctl {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart_audio_a: uart-audio-a {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		i2c3_bus: i2c3-bus {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart3_data: uart3-data {
-			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart_audio_b: uart-audio-b {
-			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		spi0_bus: spi0-bus {
-			samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		i2c4_bus: i2c4-bus {
-			samsung,pins = "gpb-2", "gpb-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		spi1_bus: spi1-bus {
-			samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		i2c5_bus: i2c5-bus {
-			samsung,pins = "gpb-6", "gpb-7";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		i2s1_bus: i2s1-bus {
-			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-					"gpc0-4";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		pcm1_bus: pcm1-bus {
-			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-					"gpc0-4";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		ac97_bus: ac97-bus {
-			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-					"gpc0-4";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		i2s2_bus: i2s2-bus {
-			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-					"gpc1-4";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		pcm2_bus: pcm2-bus {
-			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-					"gpc1-4";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		spdif_bus: spdif-bus {
-			samsung,pins = "gpc1-0", "gpc1-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		i2c6_bus: i2c6-bus {
-			samsung,pins = "gpc1-3", "gpc1-4";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		spi2_bus: spi2-bus {
-			samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		i2c7_bus: i2c7-bus {
-			samsung,pins = "gpd0-2", "gpd0-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		i2c0_bus: i2c0-bus {
-			samsung,pins = "gpd1-0", "gpd1-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		i2c1_bus: i2c1-bus {
-			samsung,pins = "gpd1-2", "gpd1-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		pwm0_out: pwm0-out {
-			samsung,pins = "gpd0-0";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		pwm1_out: pwm1-out {
-			samsung,pins = "gpd0-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		pwm2_out: pwm2-out {
-			samsung,pins = "gpd0-2";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		pwm3_out: pwm3-out {
-			samsung,pins = "gpd0-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		lcd_ctrl: lcd-ctrl {
-			samsung,pins = "gpd0-0", "gpd0-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		lcd_sync: lcd-sync {
-			samsung,pins = "gpf0-0", "gpf0-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		lcd_en: lcd-en {
-			samsung,pins = "gpe3-4";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		lcd_clk: lcd-clk {
-			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		lcd_data16: lcd-data-width16 {
-			samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
-					"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
-					"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
-					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		lcd_data18: lcd-data-width18 {
-			samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
-					"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
-					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-					"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
-					"gpf3-2", "gpf3-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		lcd_data24: lcd-data-width24 {
-			samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
-					"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
-					"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
-					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-					"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
-					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-	};
-
-	pinctrl@11000000 {
-		gpj0: gpj0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpj1: gpj1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk0: gpk0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk1: gpk1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk2: gpk2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk3: gpk3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpl0: gpl0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpl1: gpl1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpl2: gpl2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpy0: gpy0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy1: gpy1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy2: gpy2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy3: gpy3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy4: gpy4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy5: gpy5 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy6: gpy6 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpx0: gpx0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			#interrupt-cells = <2>;
-		};
-
-		gpx1: gpx1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-			#interrupt-cells = <2>;
-		};
-
-		gpx2: gpx2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx3: gpx3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		sd0_clk: sd0-clk {
-			samsung,pins = "gpk0-0";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd0_cmd: sd0-cmd {
-			samsung,pins = "gpk0-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd0_cd: sd0-cd {
-			samsung,pins = "gpk0-2";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd0_bus1: sd0-bus-width1 {
-			samsung,pins = "gpk0-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd0_bus4: sd0-bus-width4 {
-			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd0_bus8: sd0-bus-width8 {
-			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd4_clk: sd4-clk {
-			samsung,pins = "gpk0-0";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd4_cmd: sd4-cmd {
-			samsung,pins = "gpk0-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd4_cd: sd4-cd {
-			samsung,pins = "gpk0-2";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd4_bus1: sd4-bus-width1 {
-			samsung,pins = "gpk0-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd4_bus4: sd4-bus-width4 {
-			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd4_bus8: sd4-bus-width8 {
-			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd1_clk: sd1-clk {
-			samsung,pins = "gpk1-0";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd1_cmd: sd1-cmd {
-			samsung,pins = "gpk1-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd1_cd: sd1-cd {
-			samsung,pins = "gpk1-2";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd1_bus1: sd1-bus-width1 {
-			samsung,pins = "gpk1-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd1_bus4: sd1-bus-width4 {
-			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd2_clk: sd2-clk {
-			samsung,pins = "gpk2-0";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd2_cmd: sd2-cmd {
-			samsung,pins = "gpk2-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd2_cd: sd2-cd {
-			samsung,pins = "gpk2-2";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd2_bus1: sd2-bus-width1 {
-			samsung,pins = "gpk2-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd2_bus4: sd2-bus-width4 {
-			samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd2_bus8: sd2-bus-width8 {
-			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd3_clk: sd3-clk {
-			samsung,pins = "gpk3-0";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd3_cmd: sd3-cmd {
-			samsung,pins = "gpk3-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd3_cd: sd3-cd {
-			samsung,pins = "gpk3-2";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd3_bus1: sd3-bus-width1 {
-			samsung,pins = "gpk3-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd3_bus4: sd3-bus-width4 {
-			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		eint0: ext-int0 {
-			samsung,pins = "gpx0-0";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		eint8: ext-int8 {
-			samsung,pins = "gpx1-0";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		eint15: ext-int15 {
-			samsung,pins = "gpx1-7";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		eint16: ext-int16 {
-			samsung,pins = "gpx2-0";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		eint31: ext-int31 {
-			samsung,pins = "gpx3-7";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		cam_port_a_io: cam-port-a-io {
-			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
-					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
-					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		cam_port_a_clk_active: cam-port-a-clk-active {
-			samsung,pins = "gpj1-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		cam_port_a_clk_idle: cam-port-a-clk-idle {
-			samsung,pins = "gpj1-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		hdmi_cec: hdmi-cec {
-			samsung,pins = "gpx3-6";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-	};
-
-	pinctrl@03860000 {
-		gpz: gpz {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		i2s0_bus: i2s0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4", "gpz-5", "gpz-6";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		pcm0_bus: pcm0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
deleted file mode 100644
index 645feffb9239..000000000000
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ /dev/null
@@ -1,495 +0,0 @@
-/*
- * Samsung's Exynos4210 based Trats board device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's Trats board which is based on
- * Samsung's Exynos4210 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4210.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Samsung Trats based on Exynos4210";
-	compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg =  <0x40000000 0x10000000
-			0x50000000 0x10000000
-			0x60000000 0x10000000
-			0x70000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
-		stdout-path = &serial_2;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		vemmc_reg: regulator-0 {
-			compatible = "regulator-fixed";
-			regulator-name = "VMEM_VDD_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		tsp_reg: regulator-1 {
-			compatible = "regulator-fixed";
-			regulator-name = "TSP_FIXED_VOLTAGES";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		cam_af_28v_reg: regulator-2 {
-			compatible = "regulator-fixed";
-			regulator-name = "8M_AF_2.8V_EN";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		cam_io_en_reg: regulator-3 {
-			compatible = "regulator-fixed";
-			regulator-name = "CAM_IO_EN";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		cam_io_12v_reg: regulator-4 {
-			compatible = "regulator-fixed";
-			regulator-name = "8M_1.2V_EN";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		vt_core_15v_reg: regulator-5 {
-			compatible = "regulator-fixed";
-			regulator-name = "VT_CORE_1.5V";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		vol-down-key {
-			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <114>;
-			label = "volume down";
-			debounce-interval = <10>;
-		};
-
-		vol-up-key {
-			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
-			linux,code = <115>;
-			label = "volume up";
-			debounce-interval = <10>;
-		};
-
-		power-key {
-			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
-			label = "power";
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-
-		ok-key {
-			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
-			linux,code = <352>;
-			label = "ok";
-			debounce-interval = <10>;
-		};
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			cooling-maps {
-				map0 {
-				     /* Corresponds to 800MHz at freq_table */
-				     cooling-device = <&cpu0 2 2>;
-				};
-				map1 {
-				     /* Corresponds to 200MHz at freq_table */
-				     cooling-device = <&cpu0 4 4>;
-			       };
-		       };
-		};
-	};
-
-	camera {
-		pinctrl-names = "default";
-		pinctrl-0 = <>;
-		status = "okay";
-
-		fimc_0: fimc@11800000 {
-			status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC0>,
-					<&clock CLK_SCLK_FIMC0>;
-			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-			assigned-clock-rates = <0>, <160000000>;
-		};
-
-		fimc_1: fimc@11810000 {
-			status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC1>,
-					<&clock CLK_SCLK_FIMC1>;
-			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-			assigned-clock-rates = <0>, <160000000>;
-		};
-
-		fimc_2: fimc@11820000 {
-			status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC2>,
-					<&clock CLK_SCLK_FIMC2>;
-			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-			assigned-clock-rates = <0>, <160000000>;
-		};
-
-		fimc_3: fimc@11830000 {
-			status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC3>,
-					<&clock CLK_SCLK_FIMC3>;
-			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-			assigned-clock-rates = <0>, <160000000>;
-		};
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&varm_breg>;
-};
-
-&dsi_0 {
-	vddcore-supply = <&vusb_reg>;
-	vddio-supply = <&vmipi_reg>;
-	samsung,burst-clock-frequency = <500000000>;
-	samsung,esc-clock-frequency = <20000000>;
-	samsung,pll-clock-frequency = <24000000>;
-	status = "okay";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@1 {
-			reg = <1>;
-
-			dsi_out: endpoint {
-				remote-endpoint = <&dsi_in>;
-				samsung,burst-clock-frequency = <500000000>;
-				samsung,esc-clock-frequency = <20000000>;
-			};
-		};
-	};
-
-	panel@0 {
-		reg = <0>;
-		compatible = "samsung,s6e8aa0";
-		vdd3-supply = <&vcclcd_reg>;
-		vci-supply = <&vlcd_reg>;
-		reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
-		power-on-delay= <50>;
-		reset-delay = <100>;
-		init-delay = <100>;
-		flip-horizontal;
-		flip-vertical;
-		panel-width-mm = <58>;
-		panel-height-mm = <103>;
-
-		display-timings {
-			timing-0 {
-				clock-frequency = <57153600>;
-				hactive = <720>;
-				vactive = <1280>;
-				hfront-porch = <5>;
-				hback-porch = <5>;
-				hsync-len = <5>;
-				vfront-porch = <13>;
-				vback-porch = <1>;
-				vsync-len = <2>;
-			};
-		};
-
-		port {
-			dsi_in: endpoint {
-				remote-endpoint = <&dsi_out>;
-			};
-		};
-	};
-};
-
-&exynos_usbphy {
-	status = "okay";
-	vbus-supply = <&safe1_sreg>;
-};
-
-&fimd {
-	status = "okay";
-};
-
-&hsotg {
-	vusb_d-supply = <&vusb_reg>;
-	vusb_a-supply = <&vusbdac_reg>;
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&i2c_3 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <400000>;
-	pinctrl-0 = <&i2c3_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	mms114-touchscreen@48 {
-		compatible = "melfas,mms114";
-		reg = <0x48>;
-		interrupt-parent = <&gpx0>;
-		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-		x-size = <720>;
-		y-size = <1280>;
-		avdd-supply = <&tsp_reg>;
-		vdd-supply = <&tsp_reg>;
-	};
-};
-
-&i2c_5 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <100000>;
-	pinctrl-0 = <&i2c5_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	max8997_pmic@66 {
-		compatible = "maxim,max8997-pmic";
-
-		reg = <0x66>;
-		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
-
-		max8997,pmic-buck1-uses-gpio-dvs;
-		max8997,pmic-buck2-uses-gpio-dvs;
-		max8997,pmic-buck5-uses-gpio-dvs;
-
-		max8997,pmic-ignore-gpiodvs-side-effect;
-		max8997,pmic-buck125-default-dvs-idx = <0>;
-
-		max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
-						 <&gpx0 6 GPIO_ACTIVE_HIGH>,
-						 <&gpl0 0 GPIO_ACTIVE_HIGH>;
-
-		max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
-						 <1250000>, <1200000>,
-						 <1150000>, <1100000>,
-						 <1000000>, <950000>;
-
-		max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
-						 <950000>,  <900000>,
-						 <1100000>, <1000000>,
-						 <950000>,  <900000>;
-
-		max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
-						 <1200000>, <1200000>,
-						 <1200000>, <1200000>,
-						 <1200000>, <1200000>;
-
-		regulators {
-			valive_reg: LDO2 {
-			     regulator-name = "VALIVE_1.1V_C210";
-			     regulator-min-microvolt = <1100000>;
-			     regulator-max-microvolt = <1100000>;
-			     regulator-always-on;
-			};
-
-			vusb_reg: LDO3 {
-			     regulator-name = "VUSB_1.1V_C210";
-			     regulator-min-microvolt = <1100000>;
-			     regulator-max-microvolt = <1100000>;
-			};
-
-			vmipi_reg: LDO4 {
-			     regulator-name = "VMIPI_1.8V";
-			     regulator-min-microvolt = <1800000>;
-			     regulator-max-microvolt = <1800000>;
-			};
-
-			vpda_reg: LDO6 {
-			     regulator-name = "VCC_1.8V_PDA";
-			     regulator-min-microvolt = <1800000>;
-			     regulator-max-microvolt = <1800000>;
-			     regulator-always-on;
-			};
-
-			vcam_reg: LDO7 {
-			     regulator-name = "CAM_ISP_1.8V";
-			     regulator-min-microvolt = <1800000>;
-			     regulator-max-microvolt = <1800000>;
-			};
-
-			vusbdac_reg: LDO8 {
-			     regulator-name = "VUSB+VDAC_3.3V_C210";
-			     regulator-min-microvolt = <3300000>;
-			     regulator-max-microvolt = <3300000>;
-			};
-
-			vccpda_reg: LDO9 {
-			     regulator-name = "VCC_2.8V_PDA";
-			     regulator-min-microvolt = <2800000>;
-			     regulator-max-microvolt = <2800000>;
-			     regulator-always-on;
-			};
-
-			vpll_reg: LDO10 {
-			     regulator-name = "VPLL_1.1V_C210";
-			     regulator-min-microvolt = <1100000>;
-			     regulator-max-microvolt = <1100000>;
-			     regulator-always-on;
-			};
-
-			vtcam_reg: LDO12 {
-			     regulator-name = "VT_CAM_1.8V";
-			     regulator-min-microvolt = <1800000>;
-			     regulator-max-microvolt = <1800000>;
-			};
-
-			vcclcd_reg: LDO13 {
-			     regulator-name = "VCC_3.3V_LCD";
-			     regulator-min-microvolt = <3300000>;
-			     regulator-max-microvolt = <3300000>;
-			};
-
-			vlcd_reg: LDO15 {
-			     regulator-name = "VLCD_2.2V";
-			     regulator-min-microvolt = <2200000>;
-			     regulator-max-microvolt = <2200000>;
-			};
-
-			camsensor_reg: LDO16 {
-			     regulator-name = "CAM_SENSOR_IO_1.8V";
-			     regulator-min-microvolt = <1800000>;
-			     regulator-max-microvolt = <1800000>;
-			};
-
-			vddq_reg: LDO21 {
-			     regulator-name = "VDDQ_M1M2_1.2V";
-			     regulator-min-microvolt = <1200000>;
-			     regulator-max-microvolt = <1200000>;
-			     regulator-always-on;
-			};
-
-			varm_breg: BUCK1 {
-			     /*
-			      * HACK: The real name is VARM_1.2V_C210,
-			      * but exynos-cpufreq does not support
-			      * DT-based regulator lookup yet.
-			      */
-			     regulator-name = "vdd_arm";
-			     regulator-min-microvolt = <900000>;
-			     regulator-max-microvolt = <1350000>;
-			     regulator-always-on;
-			};
-
-			vint_breg: BUCK2 {
-			     regulator-name = "VINT_1.1V_C210";
-			     regulator-min-microvolt = <900000>;
-			     regulator-max-microvolt = <1100000>;
-			     regulator-always-on;
-			};
-
-			camisp_breg: BUCK4 {
-			     regulator-name = "CAM_ISP_CORE_1.2V";
-			     regulator-min-microvolt = <1200000>;
-			     regulator-max-microvolt = <1200000>;
-			};
-
-			vmem_breg: BUCK5 {
-			     regulator-name = "VMEM_1.2V_C210";
-			     regulator-min-microvolt = <1200000>;
-			     regulator-max-microvolt = <1200000>;
-			     regulator-always-on;
-			};
-
-			vccsub_breg: BUCK7 {
-			     regulator-name = "VCC_SUB_2.0V";
-			     regulator-min-microvolt = <2000000>;
-			     regulator-max-microvolt = <2000000>;
-			     regulator-always-on;
-			};
-
-			safe1_sreg: ESAFEOUT1 {
-			     regulator-name = "SAFEOUT1";
-			};
-
-			safe2_sreg: ESAFEOUT2 {
-			     regulator-name = "SAFEOUT2";
-			     regulator-boot-on;
-			};
-		};
-	};
-};
-
-&sdhci_0 {
-	bus-width = <8>;
-	non-removable;
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
-	pinctrl-names = "default";
-	vmmc-supply = <&vemmc_reg>;
-	status = "okay";
-};
-
-&serial_0 {
-	status = "okay";
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
-
-&serial_3 {
-	status = "okay";
-};
-
-&tmu {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
deleted file mode 100644
index 0c89ea99de54..000000000000
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ /dev/null
@@ -1,584 +0,0 @@
-/*
- * Samsung's Exynos4210 based Universal C210 board device tree source
- *
- * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's Universal C210 board which is based on
- * Samsung's Exynos4210 rev0 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4210.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Samsung Universal C210 based on Exynos4210 rev0";
-	compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg =  <0x40000000 0x10000000
-			0x50000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
-		stdout-path = &serial_2;
-	};
-
-	sysram@02020000 {
-		smp-sysram@0 {
-			status = "disabled";
-		};
-
-		smp-sysram@5000 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x5000 0x1000>;
-		};
-
-		smp-sysram@1f000 {
-			status = "disabled";
-		};
-	};
-
-	mct@10050000 {
-		compatible = "none";
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	vemmc_reg: voltage-regulator {
-	        compatible = "regulator-fixed";
-		regulator-name = "VMEM_VDD_2_8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpe1 3 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		vol-up-key {
-			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
-			linux,code = <115>;
-			label = "volume up";
-			debounce-interval = <1>;
-		};
-
-		vol-down-key {
-			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <114>;
-			label = "volume down";
-			debounce-interval = <1>;
-		};
-
-		config-key {
-			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
-			linux,code = <171>;
-			label = "config";
-			debounce-interval = <1>;
-			wakeup-source;
-		};
-
-		camera-key {
-			gpios = <&gpx2 3 GPIO_ACTIVE_LOW>;
-			linux,code = <212>;
-			label = "camera";
-			debounce-interval = <1>;
-		};
-
-		power-key {
-			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
-			label = "power";
-			debounce-interval = <1>;
-			wakeup-source;
-		};
-
-		ok-key {
-			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
-			linux,code = <352>;
-			label = "ok";
-			debounce-interval = <1>;
-		};
-	};
-
-	tsp_reg: voltage-regulator {
-	        compatible = "regulator-fixed";
-		regulator-name = "TSP_2_8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpe2 3 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	spi-lcd {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>;
-		num-chipselects = <1>;
-		cs-gpios = <&gpy4 3 GPIO_ACTIVE_HIGH>;
-
-		lcd@0 {
-			compatible = "samsung,ld9040";
-			reg = <0>;
-			vdd3-supply = <&ldo7_reg>;
-			vci-supply = <&ldo17_reg>;
-			reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
-			spi-max-frequency = <1200000>;
-			spi-cpol;
-			spi-cpha;
-			power-on-delay = <10>;
-			reset-delay = <10>;
-			panel-width-mm = <90>;
-			panel-height-mm = <154>;
-			display-timings {
-				timing {
-					clock-frequency = <23492370>;
-					hactive = <480>;
-					vactive = <800>;
-					hback-porch = <16>;
-					hfront-porch = <16>;
-					vback-porch = <2>;
-					vfront-porch = <28>;
-					hsync-len = <2>;
-					vsync-len = <1>;
-					hsync-active = <0>;
-					vsync-active = <0>;
-					de-active = <0>;
-					pixelclk-active = <0>;
-				};
-			};
-			port {
-				lcd_ep: endpoint {
-					remote-endpoint = <&fimd_dpi_ep>;
-				};
-			};
-		};
-	};
-
-	camera {
-		status = "okay";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <>;
-
-		fimc_0: fimc@11800000 {
-			status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC0>,
-					<&clock CLK_SCLK_FIMC0>;
-			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-			assigned-clock-rates = <0>, <160000000>;
-		};
-
-		fimc_1: fimc@11810000 {
-			status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC1>,
-					<&clock CLK_SCLK_FIMC1>;
-			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-			assigned-clock-rates = <0>, <160000000>;
-		};
-
-		fimc_2: fimc@11820000 {
-			status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC2>,
-					<&clock CLK_SCLK_FIMC2>;
-			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-			assigned-clock-rates = <0>, <160000000>;
-		};
-
-		fimc_3: fimc@11830000 {
-			status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC3>,
-					<&clock CLK_SCLK_FIMC3>;
-			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-			assigned-clock-rates = <0>, <160000000>;
-		};
-	};
-
-	hdmi_en: voltage-regulator-hdmi-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "HDMI_5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpe0 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	hdmi_ddc: i2c-ddc {
-		compatible = "i2c-gpio";
-		gpios = <&gpe4 2 GPIO_ACTIVE_HIGH &gpe4 3 GPIO_ACTIVE_HIGH>;
-		i2c-gpio,delay-us = <100>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pinctrl-0 = <&i2c_ddc_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_arm_reg>;
-};
-
-&ehci {
-	status = "okay";
-	port@0 {
-		status = "okay";
-	};
-};
-
-&exynos_usbphy {
-	status = "okay";
-	vbus-supply = <&safeout1_reg>;
-};
-
-&fimd {
-	pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
-	pinctrl-names = "default";
-	status = "okay";
-	samsung,invert-vden;
-	samsung,invert-vclk;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	port@3 {
-		reg = <3>;
-		fimd_dpi_ep: endpoint {
-			remote-endpoint = <&lcd_ep>;
-		};
-	};
-};
-
-&hdmi {
-	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd>;
-	hdmi-en-supply = <&hdmi_en>;
-	vdd-supply = <&ldo3_reg>;
-	vdd_osc-supply = <&ldo4_reg>;
-	vdd_pll-supply = <&ldo3_reg>;
-	ddc = <&hdmi_ddc>;
-	status = "okay";
-};
-
-&hsotg {
-	vusb_d-supply = <&ldo3_reg>;
-	vusb_a-supply = <&ldo8_reg>;
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&i2c_3 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <100000>;
-	pinctrl-0 = <&i2c3_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	tsp@4a {
-		/* TBD: Atmel maXtouch touchscreen */
-		reg = <0x4a>;
-	};
-};
-
-&i2c_5 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <100000>;
-	pinctrl-0 = <&i2c5_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	vdd_arm_reg: pmic@60 {
-		compatible = "maxim,max8952";
-		reg = <0x60>;
-
-		max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>,
-				    <&gpx0 4 GPIO_ACTIVE_HIGH>;
-		max8952,default-mode = <0>;
-		max8952,dvs-mode-microvolt = <1250000>, <1200000>,
-						<1050000>, <950000>;
-		max8952,sync-freq = <0>;
-		max8952,ramp-speed = <0>;
-
-		regulator-name = "vdd_arm";
-		regulator-min-microvolt = <770000>;
-		regulator-max-microvolt = <1400000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	pmic@66 {
-		compatible = "national,lp3974";
-		reg = <0x66>;
-
-		max8998,pmic-buck1-default-dvs-idx = <0>;
-		max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
-						<&gpx0 6 GPIO_ACTIVE_HIGH>;
-		max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
-						<1100000>, <1000000>;
-
-		max8998,pmic-buck2-default-dvs-idx = <0>;
-		max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>;
-		max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
-
-		regulators {
-			ldo2_reg: LDO2 {
-				regulator-name = "VALIVE_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "VUSB+MIPI_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "VADC_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "VTF_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "LDO6";
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "VLCD+VMIPI_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "VUSB+VDAC_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "VCC_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "VPLL_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "CAM_AF_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "PS_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "VHIC_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "CAM_I_HOST_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "CAM_S_ANA_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "VCC_3.0V_LCD";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "VINT_1.1V";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "VG3D_1.1V";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "VCC_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "VMEM_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			ap32khz_reg: EN32KHz-AP {
-				regulator-name = "32KHz AP";
-				regulator-always-on;
-			};
-
-			cp32khz_reg: EN32KHz-CP {
-				regulator-name = "32KHz CP";
-			};
-
-			vichg_reg: ENVICHG {
-				regulator-name = "VICHG";
-			};
-
-			safeout1_reg: ESAFEOUT1 {
-				regulator-name = "SAFEOUT1";
-			};
-
-			safeout2_reg: ESAFEOUT2 {
-				regulator-name = "SAFEOUT2";
-				regulator-boot-on;
-			};
-		};
-	};
-};
-
-&i2c_8 {
-	status = "okay";
-};
-
-&mdma1 {
-	reg = <0x12840000 0x1000>;
-};
-
-&mixer {
-	status = "okay";
-};
-
-&ohci {
-	status = "okay";
-	port@0 {
-		status = "okay";
-	};
-};
-
-&pinctrl_1 {
-	hdmi_hpd: hdmi-hpd {
-		samsung,pins = "gpx3-7";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-};
-
-&pinctrl_0 {
-	i2c_ddc_bus: i2c-ddc-bus {
-		samsung,pins = "gpe4-2", "gpe4-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pwm {
-	compatible = "samsung,s5p6440-pwm";
-	status = "okay";
-};
-
-&sdhci_0 {
-	bus-width = <8>;
-	non-removable;
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
-	pinctrl-names = "default";
-	vmmc-supply = <&vemmc_reg>;
-	status = "okay";
-};
-
-&sdhci_2 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
-	pinctrl-names = "default";
-	vmmc-supply = <&ldo5_reg>;
-	cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
-	status = "okay";
-};
-
-&serial_0 {
-	status = "okay";
-	/delete-property/dmas;
-	/delete-property/dma-names;
-};
-
-&serial_1 {
-	status = "okay";
-	/delete-property/dmas;
-	/delete-property/dma-names;
-};
-
-&serial_2 {
-	status = "okay";
-	/delete-property/dmas;
-	/delete-property/dma-names;
-};
-
-&serial_3 {
-	status = "okay";
-	/delete-property/dmas;
-	/delete-property/dma-names;
-};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
deleted file mode 100644
index 768fb075b1fd..000000000000
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ /dev/null
@@ -1,473 +0,0 @@
-/*
- * Samsung's Exynos4210 SoC device tree source
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2010-2011 Linaro Ltd.
- *		www.linaro.org
- *
- * Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4210 SoC. As device tree coverage for Exynos4210 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include "exynos4.dtsi"
-#include "exynos4210-pinctrl.dtsi"
-#include "exynos4-cpu-thermal.dtsi"
-
-/ {
-	compatible = "samsung,exynos4210", "samsung,exynos4";
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@900 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0x900>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			clock-latency = <160000>;
-
-			operating-points = <
-				1200000 1250000
-				1000000 1150000
-				800000	1075000
-				500000	975000
-				400000	975000
-				200000	950000
-			>;
-			cooling-min-level = <4>;
-			cooling-max-level = <2>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu@901 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0x901>;
-		};
-	};
-
-	sysram: sysram@02020000 {
-		compatible = "mmio-sram";
-		reg = <0x02020000 0x20000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x02020000 0x20000>;
-
-		smp-sysram@0 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x0 0x1000>;
-		};
-
-		smp-sysram@1f000 {
-			compatible = "samsung,exynos4210-sysram-ns";
-			reg = <0x1f000 0x1000>;
-		};
-	};
-
-	pd_lcd1: lcd1-power-domain@10023CA0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023CA0 0x20>;
-		#power-domain-cells = <0>;
-		label = "LCD1";
-	};
-
-	l2c: l2-cache-controller@10502000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x10502000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-		arm,tag-latency = <2 2 1>;
-		arm,data-latency = <2 2 1>;
-	};
-
-	mct: mct@10050000 {
-		compatible = "samsung,exynos4210-mct";
-		reg = <0x10050000 0x800>;
-		interrupt-parent = <&mct_map>;
-		interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-		clock-names = "fin_pll", "mct";
-
-		mct_map: mct-map {
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>,
-					<1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>,
-					<2 &combiner 12 6>,
-					<3 &combiner 12 7>,
-					<4 &gic 0 42 IRQ_TYPE_LEVEL_HIGH>,
-					<5 &gic 0 48 IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
-
-	watchdog: watchdog@10060000 {
-		compatible = "samsung,s3c6410-wdt";
-		reg = <0x10060000 0x100>;
-		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_WDT>;
-		clock-names = "watchdog";
-	};
-
-	clock: clock-controller@10030000 {
-		compatible = "samsung,exynos4210-clock";
-		reg = <0x10030000 0x20000>;
-		#clock-cells = <1>;
-	};
-
-	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,exynos4210-pinctrl";
-		reg = <0x11400000 0x1000>;
-		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	pinctrl_1: pinctrl@11000000 {
-		compatible = "samsung,exynos4210-pinctrl";
-		reg = <0x11000000 0x1000>;
-		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-
-		wakup_eint: wakeup-interrupt-controller {
-			compatible = "samsung,exynos4210-wakeup-eint";
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
-
-	pinctrl_2: pinctrl@03860000 {
-		compatible = "samsung,exynos4210-pinctrl";
-		reg = <0x03860000 0x1000>;
-	};
-
-	tmu: tmu@100C0000 {
-		compatible = "samsung,exynos4210-tmu";
-		interrupt-parent = <&combiner>;
-		reg = <0x100C0000 0x100>;
-		interrupts = <2 4>;
-		clocks = <&clock CLK_TMU_APBIF>;
-		clock-names = "tmu_apbif";
-		samsung,tmu_gain = <15>;
-		samsung,tmu_reference_voltage = <7>;
-		status = "disabled";
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tmu 0>;
-
-			trips {
-			      cpu_alert0: cpu-alert-0 {
-				      temperature = <85000>; /* millicelsius */
-			      };
-			      cpu_alert1: cpu-alert-1 {
-				      temperature = <100000>; /* millicelsius */
-			      };
-			      cpu_alert2: cpu-alert-2 {
-				      temperature = <110000>; /* millicelsius */
-			      };
-			};
-		};
-	};
-
-	g2d: g2d@12800000 {
-		compatible = "samsung,s5pv210-g2d";
-		reg = <0x12800000 0x1000>;
-		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
-		clock-names = "sclk_fimg2d", "fimg2d";
-		power-domains = <&pd_lcd0>;
-		iommus = <&sysmmu_g2d>;
-	};
-
-	camera {
-		clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
-			 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
-		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
-
-		fimc_0: fimc@11800000 {
-			samsung,pix-limits = <4224 8192 1920 4224>;
-			samsung,mainscaler-ext;
-			samsung,cam-if;
-		};
-
-		fimc_1: fimc@11810000 {
-			samsung,pix-limits = <4224 8192 1920 4224>;
-			samsung,mainscaler-ext;
-			samsung,cam-if;
-		};
-
-		fimc_2: fimc@11820000 {
-			samsung,pix-limits = <4224 8192 1920 4224>;
-			samsung,mainscaler-ext;
-			samsung,lcd-wb;
-		};
-
-		fimc_3: fimc@11830000 {
-			samsung,pix-limits = <1920 8192 1366 1920>;
-			samsung,rotators = <0>;
-			samsung,mainscaler-ext;
-			samsung,lcd-wb;
-		};
-	};
-
-	mixer: mixer@12C10000 {
-		clock-names = "mixer", "hdmi", "sclk_hdmi", "vp", "mout_mixer",
-			"sclk_mixer";
-		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-			<&clock CLK_SCLK_HDMI>, <&clock CLK_VP>,
-			<&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>;
-	};
-
-	ppmu_lcd1: ppmu_lcd1@12240000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x12240000 0x2000>;
-		clocks = <&clock CLK_PPMULCD1>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
-
-	sysmmu_g2d: sysmmu@12A20000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x12A20000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 7>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-		power-domains = <&pd_lcd0>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_fimd1: sysmmu@12220000 {
-		compatible = "samsung,exynos-sysmmu";
-		interrupt-parent = <&combiner>;
-		reg = <0x12220000 0x1000>;
-		interrupts = <5 3>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
-		power-domains = <&pd_lcd1>;
-		#iommu-cells = <0>;
-	};
-
-	bus_dmc: bus_dmc {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DIV_DMC>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_dmc_opp_table>;
-		status = "disabled";
-	};
-
-	bus_acp: bus_acp {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DIV_ACP>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_acp_opp_table>;
-		status = "disabled";
-	};
-
-	bus_peri: bus_peri {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_ACLK100>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_peri_opp_table>;
-		status = "disabled";
-	};
-
-	bus_fsys: bus_fsys {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_ACLK133>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_fsys_opp_table>;
-		status = "disabled";
-	};
-
-	bus_display: bus_display {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_ACLK160>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_display_opp_table>;
-		status = "disabled";
-	};
-
-	bus_lcd0: bus_lcd0 {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_ACLK200>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_leftbus: bus_leftbus {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DIV_GDL>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_rightbus: bus_rightbus {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DIV_GDR>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_mfc: bus_mfc {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_SCLK_MFC>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_dmc_opp_table: opp_table1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-134000000 {
-			opp-hz = /bits/ 64 <134000000>;
-			opp-microvolt = <1025000>;
-		};
-		opp-267000000 {
-			opp-hz = /bits/ 64 <267000000>;
-			opp-microvolt = <1050000>;
-		};
-		opp-400000000 {
-			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <1150000>;
-		};
-	};
-
-	bus_acp_opp_table: opp_table2 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-134000000 {
-			opp-hz = /bits/ 64 <134000000>;
-		};
-		opp-160000000 {
-			opp-hz = /bits/ 64 <160000000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-		};
-	};
-
-	bus_peri_opp_table: opp_table3 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-5000000 {
-			opp-hz = /bits/ 64 <5000000>;
-		};
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-	};
-
-	bus_fsys_opp_table: opp_table4 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-10000000 {
-			opp-hz = /bits/ 64 <10000000>;
-		};
-		opp-134000000 {
-			opp-hz = /bits/ 64 <134000000>;
-		};
-	};
-
-	bus_display_opp_table: opp_table5 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-		opp-134000000 {
-			opp-hz = /bits/ 64 <134000000>;
-		};
-		opp-160000000 {
-			opp-hz = /bits/ 64 <160000000>;
-		};
-	};
-
-	bus_leftbus_opp_table: opp_table6 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-		opp-160000000 {
-			opp-hz = /bits/ 64 <160000000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-		};
-	};
-};
-
-&gic {
-	cpu-offset = <0x8000>;
-};
-
-&combiner {
-	samsung,combiner-nr = <16>;
-	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&mdma1 {
-	power-domains = <&pd_lcd0>;
-};
-
-&pmu_system_controller {
-	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
-			"clkout4", "clkout8", "clkout9";
-	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
-		<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
-		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
-	#clock-cells = <1>;
-};
-
-&rotator {
-	power-domains = <&pd_lcd0>;
-};
-
-&sysmmu_rotator {
-	power-domains = <&pd_lcd0>;
-};
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
deleted file mode 100644
index 44a4de08466b..000000000000
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Hardkernel's Exynos4412 based ODROID-U3 board device tree source
- *
- * Copyright (c) 2014 Marek Szyprowski <m.szyprowski@samsung.com>
- *
- * Device tree source file for Hardkernel's ODROID-U3 board which is based
- * on Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4412-odroid-common.dtsi"
-#include "exynos4412-prime.dtsi"
-
-/ {
-	model = "Hardkernel ODROID-U3 board based on Exynos4412";
-	compatible = "hardkernel,odroid-u3", "samsung,exynos4412", "samsung,exynos4";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x7FF00000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			label = "led1:heart";
-			gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	fan0: pwm-fan {
-		compatible = "pwm-fan";
-		pwms = <&pwm 0 10000 0>;
-		cooling-min-state = <0>;
-		cooling-max-state = <3>;
-		#cooling-cells = <2>;
-		cooling-levels = <0 102 170 230>;
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			cooling-maps {
-				map0 {
-				     trip = <&cpu_alert1>;
-				     cooling-device = <&cpu0 9 9>;
-				};
-				map1 {
-				     trip = <&cpu_alert2>;
-				     cooling-device = <&cpu0 15 15>;
-				};
-				map2 {
-				     trip = <&cpu_alert0>;
-				     cooling-device = <&fan0 0 1>;
-				};
-				map3 {
-				     trip = <&cpu_alert1>;
-				     cooling-device = <&fan0 1 2>;
-				};
-				map4 {
-				     trip = <&cpu_alert2>;
-				     cooling-device = <&fan0 2 3>;
-				};
-			};
-		};
-	};
-};
-
-/* Supply for LAN9730/SMSC95xx */
-&buck8_reg {
-	regulator-name = "BUCK8_P3V3";
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-};
-
-&hdmicec {
-	needs-hpd;
-};
-
-/* VDDQ for MSHC (eMMC card) */
-&ldo22_reg {
-	regulator-name = "LDO22_VDDQ_MMC4_2.8V";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-};
-
-&mshc_0 {
-	vqmmc-supply = <&ldo22_reg>;
-};
-
-&pwm {
-	pinctrl-0 = <&pwm0_out>;
-	pinctrl-names = "default";
-	samsung,pwm-outputs = <0>;
-	status = "okay";
-};
-
-&usb3503 {
-	clock-names = "refclk";
-	clocks = <&pmu_system_controller 0>;
-	refclk-frequency = <24000000>;
-};
-
-&ehci {
-	port@1 {
-		status = "okay";
-	};
-	port@2 {
-		status = "okay";
-	};
-};
-
-&sound {
-	simple-audio-card,name = "Odroid-U3";
-	simple-audio-card,widgets =
-		"Headphone", "Headphone Jack",
-		"Speakers", "Speakers";
-	simple-audio-card,routing =
-		"Headphone Jack", "HPL",
-		"Headphone Jack", "HPR",
-		"Headphone Jack", "MICBIAS",
-		"IN1", "Headphone Jack",
-		"Speakers", "SPKL",
-		"Speakers", "SPKR";
-};
-
-&spi_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_bus>;
-	cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
deleted file mode 100644
index 97882267ef09..000000000000
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Hardkernel's Exynos4412 based ODROID-X board device tree source
- *
- * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
- *
- * Device tree source file for Hardkernel's ODROID-X board which is based
- * on Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4412-odroid-common.dtsi"
-
-/ {
-	model = "Hardkernel ODROID-X board based on Exynos4412";
-	compatible = "hardkernel,odroid-x", "samsung,exynos4412", "samsung,exynos4";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x3FF00000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			label = "led1:heart";
-			gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-		led2 {
-			label = "led2:mmc0";
-			gpios = <&gpc1 2 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	gpio_keys {
-		pinctrl-0 = <&gpio_power_key &gpio_home_key>;
-
-		home_key {
-			interrupt-parent = <&gpx2>;
-			interrupts = <2 IRQ_TYPE_NONE>;
-			gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_HOME>;
-			label = "home key";
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	regulator_p3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "p3v3_en";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpa1 1 GPIO_ACTIVE_LOW>;
-		enable-active-high;
-		regulator-always-on;
-	};
-};
-
-&adc {
-	vdd-supply = <&ldo10_reg>;
-	status = "okay";
-};
-
-/* VDDQ for MSHC (eMMC card) */
-&buck8_reg {
-	regulator-name = "BUCK8_VDDQ_MMC4_2.8V";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-};
-
-&ehci {
-	port@1 {
-		status = "okay";
-	};
-};
-
-&mshc_0 {
-	vqmmc-supply = <&buck8_reg>;
-};
-
-&pinctrl_1 {
-	gpio_home_key: home_key {
-		samsung,pins = "gpx2-2";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-};
-
-&serial_2 {
-	status = "okay";
-};
-
-&serial_3 {
-	status = "okay";
-};
-
-&sound {
-	simple-audio-card,name = "Odroid-X";
-	simple-audio-card,widgets =
-		"Headphone", "Headphone Jack",
-		"Microphone", "Mic Jack",
-		"Microphone", "DMIC";
-	simple-audio-card,routing =
-		"Headphone Jack", "HPL",
-		"Headphone Jack", "HPR",
-		"IN1", "Mic Jack",
-		"Mic Jack", "MICBIAS";
-};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx2.dts b/arch/arm/boot/dts/exynos4412-odroidx2.dts
deleted file mode 100644
index d867b2ee95ca..000000000000
--- a/arch/arm/boot/dts/exynos4412-odroidx2.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Hardkernel's Exynos4412 based ODROID-X2 board device tree source
- *
- * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
- *
- * Device tree source file for Hardkernel's ODROID-X2 board which is based
- * on Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include "exynos4412-odroidx.dts"
-#include "exynos4412-prime.dtsi"
-
-/ {
-	model = "Hardkernel ODROID-X2 board based on Exynos4412";
-	compatible = "hardkernel,odroid-x2", "samsung,exynos4412", "samsung,exynos4";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x7FF00000>;
-	};
-};
diff --git a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
deleted file mode 100644
index 1d27c28564e4..000000000000
--- a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
+++ /dev/null
@@ -1,984 +0,0 @@
-/*
- * Samsung's Exynos4412 SoCs pin-mux and pin-config device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos4412 SoCs pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <dt-bindings/pinctrl/samsung.h>
-
-#define PIN_SLP(_pin, _mode, _pull)					\
-	_pin {								\
-		samsung,pins = #_pin;					\
-		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
-		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>;	\
-	}
-
-/ {
-	pinctrl_0: pinctrl@11400000 {
-		gpa0: gpa0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa1: gpa1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb: gpb {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc0: gpc0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc1: gpc1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd0: gpd0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd1: gpd1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf0: gpf0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf1: gpf1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf2: gpf2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf3: gpf3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpj0: gpj0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpj1: gpj1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart0_data: uart0-data {
-			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart0_fctl: uart0-fctl {
-			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart1_data: uart1-data {
-			samsung,pins = "gpa0-4", "gpa0-5";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart1_fctl: uart1-fctl {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		i2c2_bus: i2c2-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart2_data: uart2-data {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart2_fctl: uart2-fctl {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart_audio_a: uart-audio-a {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		i2c3_bus: i2c3-bus {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart3_data: uart3-data {
-			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart_audio_b: uart-audio-b {
-			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		spi0_bus: spi0-bus {
-			samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		i2c4_bus: i2c4-bus {
-			samsung,pins = "gpb-0", "gpb-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		spi1_bus: spi1-bus {
-			samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		i2c5_bus: i2c5-bus {
-			samsung,pins = "gpb-2", "gpb-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		i2s1_bus: i2s1-bus {
-			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-					"gpc0-4";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		pcm1_bus: pcm1-bus {
-			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-					"gpc0-4";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		ac97_bus: ac97-bus {
-			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-					"gpc0-4";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		i2s2_bus: i2s2-bus {
-			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-					"gpc1-4";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		pcm2_bus: pcm2-bus {
-			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-					"gpc1-4";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		spdif_bus: spdif-bus {
-			samsung,pins = "gpc1-0", "gpc1-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		i2c6_bus: i2c6-bus {
-			samsung,pins = "gpc1-3", "gpc1-4";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		spi2_bus: spi2-bus {
-			samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		pwm0_out: pwm0-out {
-			samsung,pins = "gpd0-0";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		pwm1_out: pwm1-out {
-			samsung,pins = "gpd0-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		lcd_ctrl: lcd-ctrl {
-			samsung,pins = "gpd0-0", "gpd0-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		i2c7_bus: i2c7-bus {
-			samsung,pins = "gpd0-2", "gpd0-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		pwm2_out: pwm2-out {
-			samsung,pins = "gpd0-2";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		pwm3_out: pwm3-out {
-			samsung,pins = "gpd0-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		i2c0_bus: i2c0-bus {
-			samsung,pins = "gpd1-0", "gpd1-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		mipi0_clk: mipi0-clk {
-			samsung,pins = "gpd1-0", "gpd1-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		i2c1_bus: i2c1-bus {
-			samsung,pins = "gpd1-2", "gpd1-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		mipi1_clk: mipi1-clk {
-			samsung,pins = "gpd1-2", "gpd1-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		lcd_clk: lcd-clk {
-			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		lcd_data16: lcd-data-width16 {
-			samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
-					"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
-					"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
-					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		lcd_data18: lcd-data-width18 {
-			samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
-					"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
-					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-					"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
-					"gpf3-2", "gpf3-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		lcd_data24: lcd-data-width24 {
-			samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
-					"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
-					"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
-					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-					"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
-					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		lcd_ldi: lcd-ldi {
-			samsung,pins = "gpf3-4";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		cam_port_a_io: cam-port-a-io {
-			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
-					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
-					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		cam_port_a_clk_active: cam-port-a-clk-active {
-			samsung,pins = "gpj1-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		cam_port_a_clk_idle: cam-port-a-clk-idle {
-			samsung,pins = "gpj1-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-	};
-
-	pinctrl_1: pinctrl@11000000 {
-		gpk0: gpk0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk1: gpk1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk2: gpk2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk3: gpk3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpl0: gpl0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpl1: gpl1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpl2: gpl2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpm0: gpm0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpm1: gpm1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpm2: gpm2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpm3: gpm3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpm4: gpm4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpy0: gpy0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy1: gpy1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy2: gpy2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy3: gpy3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy4: gpy4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy5: gpy5 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy6: gpy6 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpx0: gpx0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			#interrupt-cells = <2>;
-		};
-
-		gpx1: gpx1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-			#interrupt-cells = <2>;
-		};
-
-		gpx2: gpx2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx3: gpx3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		sd0_clk: sd0-clk {
-			samsung,pins = "gpk0-0";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd0_cmd: sd0-cmd {
-			samsung,pins = "gpk0-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd0_cd: sd0-cd {
-			samsung,pins = "gpk0-2";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd0_bus1: sd0-bus-width1 {
-			samsung,pins = "gpk0-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd0_bus4: sd0-bus-width4 {
-			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd0_bus8: sd0-bus-width8 {
-			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd4_clk: sd4-clk {
-			samsung,pins = "gpk0-0";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd4_cmd: sd4-cmd {
-			samsung,pins = "gpk0-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd4_cd: sd4-cd {
-			samsung,pins = "gpk0-2";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd4_bus1: sd4-bus-width1 {
-			samsung,pins = "gpk0-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd4_bus4: sd4-bus-width4 {
-			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd4_bus8: sd4-bus-width8 {
-			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd1_clk: sd1-clk {
-			samsung,pins = "gpk1-0";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd1_cmd: sd1-cmd {
-			samsung,pins = "gpk1-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd1_cd: sd1-cd {
-			samsung,pins = "gpk1-2";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd1_bus1: sd1-bus-width1 {
-			samsung,pins = "gpk1-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd1_bus4: sd1-bus-width4 {
-			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd2_clk: sd2-clk {
-			samsung,pins = "gpk2-0";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd2_cmd: sd2-cmd {
-			samsung,pins = "gpk2-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd2_cd: sd2-cd {
-			samsung,pins = "gpk2-2";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd2_bus1: sd2-bus-width1 {
-			samsung,pins = "gpk2-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd2_bus4: sd2-bus-width4 {
-			samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd2_bus8: sd2-bus-width8 {
-			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd3_clk: sd3-clk {
-			samsung,pins = "gpk3-0";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd3_cmd: sd3-cmd {
-			samsung,pins = "gpk3-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd3_cd: sd3-cd {
-			samsung,pins = "gpk3-2";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd3_bus1: sd3-bus-width1 {
-			samsung,pins = "gpk3-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		sd3_bus4: sd3-bus-width4 {
-			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		cam_port_b_io: cam-port-b-io {
-			samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
-					"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
-					"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		cam_port_b_clk_active: cam-port-b-clk-active {
-			samsung,pins = "gpm2-2";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-		};
-
-		cam_port_b_clk_idle: cam-port-b-clk-idle {
-			samsung,pins = "gpm2-2";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		eint0: ext-int0 {
-			samsung,pins = "gpx0-0";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		eint8: ext-int8 {
-			samsung,pins = "gpx1-0";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		eint15: ext-int15 {
-			samsung,pins = "gpx1-7";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		eint16: ext-int16 {
-			samsung,pins = "gpx2-0";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		eint31: ext-int31 {
-			samsung,pins = "gpx3-7";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		fimc_is_i2c0: fimc-is-i2c0 {
-			samsung,pins = "gpm4-0", "gpm4-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		fimc_is_i2c1: fimc-is-i2c1 {
-			samsung,pins = "gpm4-2", "gpm4-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		fimc_is_uart: fimc-is-uart {
-			samsung,pins = "gpm3-5", "gpm3-7";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		hdmi_cec: hdmi-cec {
-			samsung,pins = "gpx3-6";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-	};
-
-	pinctrl_2: pinctrl@03860000 {
-		gpz: gpz {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		i2s0_bus: i2s0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4", "gpz-5", "gpz-6";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		pcm0_bus: pcm0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-	};
-
-	pinctrl_3: pinctrl@106E0000 {
-		gpv0: gpv0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv1: gpv1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv2: gpv2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv3: gpv3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv4: gpv4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		c2c_bus: c2c-bus {
-			samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
-					"gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
-					"gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
-					"gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7",
-					"gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
-					"gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
-					"gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
-					"gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7",
-					"gpv4-0", "gpv4-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi b/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi
deleted file mode 100644
index 16e4b77d8cb1..000000000000
--- a/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Device tree sources for Exynos4412 PPMU common device tree
- *
- * Copyright (C) 2015 Samsung Electronics
- * Author: Chanwoo Choi <cw00.choi@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-&ppmu_dmc0 {
-       status = "okay";
-
-       events {
-	       ppmu_dmc0_3: ppmu-event3-dmc0 {
-		       event-name = "ppmu-event3-dmc0";
-	       };
-       };
-};
-
-&ppmu_dmc1 {
-       status = "okay";
-
-       events {
-	       ppmu_dmc1_3: ppmu-event3-dmc1 {
-		       event-name = "ppmu-event3-dmc1";
-	       };
-       };
-};
-
-&ppmu_leftbus {
-       status = "okay";
-
-       events {
-	       ppmu_leftbus_3: ppmu-event3-leftbus {
-		       event-name = "ppmu-event3-leftbus";
-	       };
-       };
-};
-
-&ppmu_rightbus {
-       status = "okay";
-
-       events {
-	       ppmu_rightbus_3: ppmu-event3-rightbus {
-		       event-name = "ppmu-event3-rightbus";
-	       };
-       };
-};
diff --git a/arch/arm/boot/dts/exynos4412-prime.dtsi b/arch/arm/boot/dts/exynos4412-prime.dtsi
deleted file mode 100644
index a67bd953d754..000000000000
--- a/arch/arm/boot/dts/exynos4412-prime.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Samsung's Exynos4412 Prime SoC device tree source
- *
- * Copyright (c) 2016 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Exynos4412 Prime SoC revision supports higher CPU frequencies than
- * non-Prime version.  Therefore we need to update OPPs table and
- * thermal maps accordingly.
- */
-
-&cpu0_opp_1500 {
-	/delete-property/turbo-mode;
-};
-
-&cpu0_opp_table {
-	opp-1600000000 {
-		opp-hz = /bits/ 64 <1600000000>;
-		opp-microvolt = <1350000>;
-		clock-latency-ns = <200000>;
-	};
-	opp-1704000000 {
-		opp-hz = /bits/ 64 <1704000000>;
-		opp-microvolt = <1350000>;
-		clock-latency-ns = <200000>;
-	};
-};
-
-&cooling_map0 {
-	cooling-device = <&cpu0 9 9>;
-};
-
-&cooling_map1 {
-	cooling-device = <&cpu0 15 15>;
-};
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
deleted file mode 100644
index 7fcb43431b59..000000000000
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * Samsung's Exynos4412 based SMDK board device tree source
- *
- * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's SMDK4412 board which is based on
- * Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4412.dtsi"
-#include "exynos-mfc-reserved-memory.dtsi"
-
-/ {
-	model = "Samsung SMDK evaluation board based on Exynos4412";
-	compatible = "samsung,smdk4412", "samsung,exynos4412", "samsung,exynos4";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
-		stdout-path = &serial_1;
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-};
-
-&keypad {
-	samsung,keypad-num-rows = <3>;
-	samsung,keypad-num-columns = <8>;
-	linux,keypad-no-autorepeat;
-	wakeup-source;
-	pinctrl-0 = <&keypad_rows &keypad_cols>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	key_1 {
-		keypad,row = <1>;
-		keypad,column = <3>;
-		linux,code = <2>;
-	};
-
-	key_2 {
-		keypad,row = <1>;
-		keypad,column = <4>;
-		linux,code = <3>;
-	};
-
-	key_3 {
-		keypad,row = <1>;
-		keypad,column = <5>;
-		linux,code = <4>;
-	};
-
-	key_4 {
-		keypad,row = <1>;
-		keypad,column = <6>;
-		linux,code = <5>;
-	};
-
-	key_5 {
-		keypad,row = <1>;
-		keypad,column = <7>;
-		linux,code = <6>;
-	};
-
-	key_A {
-		keypad,row = <2>;
-		keypad,column = <6>;
-		linux,code = <30>;
-	};
-
-	key_B {
-		keypad,row = <2>;
-		keypad,column = <7>;
-		linux,code = <48>;
-	};
-
-	key_C {
-		keypad,row = <0>;
-		keypad,column = <5>;
-		linux,code = <46>;
-	};
-
-	key_D {
-		keypad,row = <2>;
-		keypad,column = <5>;
-		linux,code = <32>;
-	};
-
-	key_E {
-		keypad,row = <0>;
-		keypad,column = <7>;
-		linux,code = <18>;
-	};
-};
-
-&pinctrl_1 {
-	keypad_rows: keypad-rows {
-		samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	keypad_cols: keypad-cols {
-		samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
-			       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&sdhci_2 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&serial_0 {
-	status = "okay";
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
-
-&serial_3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts
deleted file mode 100644
index 5504398e6e37..000000000000
--- a/arch/arm/boot/dts/exynos4412-tiny4412.dts
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * FriendlyARM's Exynos4412 based TINY4412 board device tree source
- *
- * Copyright (c) 2013 Alex Ling <kasimling@gmail.com>
- *
- * Device tree source file for FriendlyARM's TINY4412 board which is based on
- * Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4412.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "FriendlyARM TINY4412 board based on Exynos4412";
-	compatible = "friendlyarm,tiny4412", "samsung,exynos4412", "samsung,exynos4";
-
-	chosen {
-		stdout-path = &serial_0;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x40000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led1 {
-			label = "led1";
-			gpios = <&gpm4 0 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led2 {
-			label = "led2";
-			gpios = <&gpm4 1 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led3 {
-			label = "led3";
-			gpios = <&gpm4 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led4 {
-			label = "led4";
-			gpios = <&gpm4 3 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-};
-
-&rtc {
-	status = "okay";
-};
-
-&sdhci_2 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&serial_0 {
-	status = "okay";
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
-
-&serial_3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi
deleted file mode 100644
index e3f7934d19d0..000000000000
--- a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Device tree sources for Exynos4412 TMU sensor configuration
- *
- * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <8>;
-samsung,tmu_reference_voltage = <16>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <55>;
-samsung,tmu_min_efuse_value = <40>;
-samsung,tmu_max_efuse_value = <100>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <85>;
-samsung,tmu_default_temp_offset = <50>;
-samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
deleted file mode 100644
index 35e9b94b86b8..000000000000
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ /dev/null
@@ -1,1299 +0,0 @@
-/*
- * Samsung's Exynos4412 based Trats 2 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's Trats 2 board which is based on
- * Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4412.dtsi"
-#include "exynos4412-ppmu-common.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clock/maxim,max77686.h>
-
-/ {
-	model = "Samsung Trats 2 based on Exynos4412";
-	compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
-
-	aliases {
-		i2c9 = &i2c_ak8975;
-		i2c10 = &i2c_cm36651;
-		i2c11 = &i2c_max77693;
-		i2c12 = &i2c_max77693_fuel;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg =  <0x40000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
-		stdout-path = &serial_2;
-	};
-
-	firmware@0204F000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x0204F000 0x1000>;
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti", "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti", "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cam_io_reg: voltage-regulator-1 {
-			compatible = "regulator-fixed";
-			regulator-name = "CAM_SENSOR_A";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		lcd_vdd3_reg: voltage-regulator-2 {
-			compatible = "regulator-fixed";
-			regulator-name = "LCD_VDD_2.2V";
-			regulator-min-microvolt = <2200000>;
-			regulator-max-microvolt = <2200000>;
-			gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		cam_af_reg: voltage-regulator-3 {
-			compatible = "regulator-fixed";
-			regulator-name = "CAM_AF";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		ps_als_reg: voltage-regulator-5 {
-			compatible = "regulator-fixed";
-			regulator-name = "LED_A_3.0V";
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-down {
-			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
-			linux,code = <114>;
-			label = "volume down";
-			debounce-interval = <10>;
-		};
-
-		key-up {
-			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
-			linux,code = <115>;
-			label = "volume up";
-			debounce-interval = <10>;
-		};
-
-		key-power {
-			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
-			label = "power";
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-
-		key-ok {
-			gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
-			linux,code = <139>;
-			label = "ok";
-			debounce-inteval = <10>;
-			wakeup-source;
-		};
-	};
-
-	i2c_max77693: i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-
-		max77693@66 {
-			compatible = "maxim,max77693";
-			interrupt-parent = <&gpx1>;
-			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-			reg = <0x66>;
-
-			regulators {
-				esafeout1_reg: ESAFEOUT1 {
-					regulator-name = "ESAFEOUT1";
-				};
-				esafeout2_reg: ESAFEOUT2 {
-					regulator-name = "ESAFEOUT2";
-				};
-				charger_reg: CHARGER {
-					regulator-name = "CHARGER";
-					regulator-min-microamp = <60000>;
-					regulator-max-microamp = <2580000>;
-				};
-			};
-
-			max77693_haptic {
-				compatible = "maxim,max77693-haptic";
-				haptic-supply = <&ldo26_reg>;
-				pwms = <&pwm 0 38022 0>;
-			};
-
-			charger {
-				compatible = "maxim,max77693-charger";
-
-				maxim,constant-microvolt = <4350000>;
-				maxim,min-system-microvolt = <3600000>;
-				maxim,thermal-regulation-celsius = <100>;
-				maxim,battery-overcurrent-microamp = <3500000>;
-				maxim,charge-input-threshold-microvolt = <4300000>;
-			};
-		};
-	};
-
-	i2c_max77693_fuel: i2c-gpio-3 {
-		compatible = "i2c-gpio";
-		gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-
-		max77693-fuel-gauge@36 {
-			compatible = "maxim,max17047";
-			interrupt-parent = <&gpx2>;
-			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-			reg = <0x36>;
-
-			maxim,over-heat-temp = <700>;
-			maxim,over-volt = <4500>;
-		};
-	};
-
-	i2c_ak8975: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-
-		ak8975@0c {
-			compatible = "asahi-kasei,ak8975";
-			reg = <0x0c>;
-			gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	i2c_cm36651: i2c-gpio-2 {
-		compatible = "i2c-gpio";
-		gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cm36651@18 {
-			compatible = "capella,cm36651";
-			reg = <0x18>;
-			interrupt-parent = <&gpx0>;
-			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-			vled-supply = <&ps_als_reg>;
-		};
-	};
-
-	camera: camera {
-		pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
-		pinctrl-names = "default";
-		status = "okay";
-		assigned-clocks = <&clock CLK_MOUT_CAM0>,
-				  <&clock CLK_MOUT_CAM1>;
-		assigned-clock-parents = <&clock CLK_XUSBXTI>,
-					 <&clock CLK_XUSBXTI>;
-
-
-	};
-
-	sound {
-		compatible = "samsung,trats2-audio";
-		samsung,i2s-controller = <&i2s0>;
-		samsung,model = "Trats2";
-		samsung,audio-codec = <&wm1811>;
-		samsung,audio-routing =
-			"SPK", "SPKOUTLN",
-			"SPK", "SPKOUTLP",
-			"SPK", "SPKOUTRN",
-			"SPK", "SPKOUTRP";
-	};
-
-	thermistor-ap {
-		compatible = "murata,ncp15wb473";
-		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
-		pullup-ohm = <100000>;	 /* 100K */
-		pulldown-ohm = <100000>; /* 100K */
-		io-channels = <&adc 1>;  /* AP temperature */
-	};
-
-	thermistor-battery {
-		compatible = "murata,ncp15wb473";
-		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
-		pullup-ohm = <100000>;	 /* 100K */
-		pulldown-ohm = <100000>; /* 100K */
-		io-channels = <&adc 2>;  /* Battery temperature */
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			cooling-maps {
-				map0 {
-				     /* Corresponds to 800MHz at freq_table */
-				     cooling-device = <&cpu0 7 7>;
-				};
-				map1 {
-				     /* Corresponds to 200MHz at freq_table */
-				     cooling-device = <&cpu0 13 13>;
-			       };
-		       };
-		};
-	};
-};
-
-&adc {
-	vdd-supply = <&ldo3_reg>;
-	status = "okay";
-};
-
-&bus_dmc {
-	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
-	vdd-supply = <&buck1_reg>;
-	status = "okay";
-};
-
-&bus_acp {
-	devfreq = <&bus_dmc>;
-	status = "okay";
-};
-
-&bus_c2c {
-	devfreq = <&bus_dmc>;
-	status = "okay";
-};
-
-&bus_leftbus {
-	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
-	vdd-supply = <&buck3_reg>;
-	status = "okay";
-};
-
-&bus_rightbus {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_display {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_fsys {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_peri {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&bus_mfc {
-	devfreq = <&bus_leftbus>;
-	status = "okay";
-};
-
-&cpu0 {
-	cpu0-supply = <&buck2_reg>;
-};
-
-&csis_0 {
-	status = "okay";
-	vddcore-supply = <&ldo8_reg>;
-	vddio-supply = <&ldo10_reg>;
-	assigned-clocks = <&clock CLK_MOUT_CSIS0>,
-			<&clock CLK_SCLK_CSIS0>;
-	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-	assigned-clock-rates = <0>, <176000000>;
-
-	/* Camera C (3) MIPI CSI-2 (CSIS0) */
-	port@3 {
-		reg = <3>;
-		csis0_ep: endpoint {
-			remote-endpoint = <&s5c73m3_ep>;
-			data-lanes = <1 2 3 4>;
-			samsung,csis-hs-settle = <12>;
-		};
-	};
-};
-
-&csis_1 {
-	status = "okay";
-	vddcore-supply = <&ldo8_reg>;
-	vddio-supply = <&ldo10_reg>;
-	assigned-clocks = <&clock CLK_MOUT_CSIS1>,
-			<&clock CLK_SCLK_CSIS1>;
-	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-	assigned-clock-rates = <0>, <176000000>;
-
-	/* Camera D (4) MIPI CSI-2 (CSIS1) */
-	port@4 {
-		reg = <4>;
-		csis1_ep: endpoint {
-			remote-endpoint = <&is_s5k6a3_ep>;
-			data-lanes = <1>;
-			samsung,csis-hs-settle = <18>;
-			samsung,csis-wclk;
-		};
-	};
-};
-
-&dsi_0 {
-	vddcore-supply = <&ldo8_reg>;
-	vddio-supply = <&ldo10_reg>;
-	samsung,burst-clock-frequency = <500000000>;
-	samsung,esc-clock-frequency = <20000000>;
-	samsung,pll-clock-frequency = <24000000>;
-	status = "okay";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@1 {
-			reg = <1>;
-
-			dsi_out: endpoint {
-				remote-endpoint = <&dsi_in>;
-				samsung,burst-clock-frequency = <500000000>;
-				samsung,esc-clock-frequency = <20000000>;
-			};
-		};
-	};
-
-	panel@0 {
-		compatible = "samsung,s6e8aa0";
-		reg = <0>;
-		vdd3-supply = <&lcd_vdd3_reg>;
-		vci-supply = <&ldo25_reg>;
-		reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
-		power-on-delay= <50>;
-		reset-delay = <100>;
-		init-delay = <100>;
-		flip-horizontal;
-		flip-vertical;
-		panel-width-mm = <58>;
-		panel-height-mm = <103>;
-
-		display-timings {
-			timing-0 {
-				clock-frequency = <57153600>;
-				hactive = <720>;
-				vactive = <1280>;
-				hfront-porch = <5>;
-				hback-porch = <5>;
-				hsync-len = <5>;
-				vfront-porch = <13>;
-				vback-porch = <1>;
-				vsync-len = <2>;
-			};
-		};
-
-		port {
-			dsi_in: endpoint {
-				remote-endpoint = <&dsi_out>;
-			};
-		};
-	};
-};
-
-&exynos_usbphy {
-	vbus-supply = <&esafeout1_reg>;
-	status = "okay";
-};
-
-&fimc_0 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
-			<&clock CLK_SCLK_FIMC0>;
-	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-	assigned-clock-rates = <0>, <176000000>;
-};
-
-&fimc_1 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC1>,
-			<&clock CLK_SCLK_FIMC1>;
-	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-	assigned-clock-rates = <0>, <176000000>;
-};
-
-&fimc_2 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC2>,
-			<&clock CLK_SCLK_FIMC2>;
-	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-	assigned-clock-rates = <0>, <176000000>;
-};
-
-&fimc_3 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC3>,
-			<&clock CLK_SCLK_FIMC3>;
-	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-	assigned-clock-rates = <0>, <176000000>;
-};
-
-&fimc_is {
-	pinctrl-0 = <&fimc_is_uart>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	i2c1_isp: i2c-isp@12140000 {
-		pinctrl-0 = <&fimc_is_i2c1>;
-		pinctrl-names = "default";
-
-		s5k6a3@10 {
-			compatible = "samsung,s5k6a3";
-			reg = <0x10>;
-			svdda-supply = <&cam_io_reg>;
-			svddio-supply = <&ldo19_reg>;
-			afvdd-supply = <&ldo19_reg>;
-			clock-frequency = <24000000>;
-			/* CAM_B_CLKOUT */
-			clocks = <&camera 1>;
-			clock-names = "extclk";
-			samsung,camclk-out = <1>;
-			gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
-
-			port {
-				is_s5k6a3_ep: endpoint {
-					remote-endpoint = <&csis1_ep>;
-					data-lanes = <1>;
-				};
-			};
-		};
-	};
-};
-
-&fimc_lite_0 {
-	status = "okay";
-};
-
-&fimc_lite_1 {
-	status = "okay";
-};
-
-&fimd {
-	status = "okay";
-};
-
-&hsotg {
-	vusb_d-supply = <&ldo15_reg>;
-	vusb_a-supply = <&ldo12_reg>;
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&i2c_0 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <400000>;
-	pinctrl-0 = <&i2c0_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	s5c73m3@3c {
-		compatible = "samsung,s5c73m3";
-		reg = <0x3c>;
-		standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>;   /* ISP_STANDBY */
-		xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
-		vdd-int-supply = <&buck9_reg>;
-		vddio-cis-supply = <&ldo9_reg>;
-		vdda-supply = <&ldo17_reg>;
-		vddio-host-supply = <&ldo18_reg>;
-		vdd-af-supply = <&cam_af_reg>;
-		vdd-reg-supply = <&cam_io_reg>;
-		clock-frequency = <24000000>;
-		/* CAM_A_CLKOUT */
-		clocks = <&camera 0>;
-		clock-names = "cis_extclk";
-		port {
-			s5c73m3_ep: endpoint {
-				remote-endpoint = <&csis0_ep>;
-				data-lanes = <1 2 3 4>;
-			};
-		};
-	};
-};
-
-&i2c_3 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <400000>;
-	pinctrl-0 = <&i2c3_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	mms114-touchscreen@48 {
-		compatible = "melfas,mms114";
-		reg = <0x48>;
-		interrupt-parent = <&gpm2>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-		x-size = <720>;
-		y-size = <1280>;
-		avdd-supply = <&ldo23_reg>;
-		vdd-supply = <&ldo24_reg>;
-	};
-};
-
-&i2c_4 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <100000>;
-	pinctrl-0 = <&i2c4_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	wm1811: wm1811@1a {
-		compatible = "wlf,wm1811";
-		reg = <0x1a>;
-		clocks = <&pmu_system_controller 0>;
-		clock-names = "MCLK1";
-		DCVDD-supply = <&ldo3_reg>;
-		DBVDD1-supply = <&ldo3_reg>;
-		wlf,ldo1ena = <&gpj0 4 0>;
-	};
-};
-
-&i2c_7 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <100000>;
-	pinctrl-0 = <&i2c7_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	max77686: max77686_pmic@09 {
-		compatible = "maxim,max77686";
-		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
-		reg = <0x09>;
-		#clock-cells = <1>;
-
-		voltage-regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VALIVE_1.0V_AP";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VM1M2_1.2V_AP";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "VCC_1.8V_AP";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "VCC_2.8V_AP";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "VCC_1.8V_IO";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "VMPLL_1.0V_AP";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "VPLL_1.0V_AP";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "VMIPI_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "CAM_ISP_MIPI_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "VMIPI_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "VABB1_1.95V";
-				regulator-min-microvolt = <1950000>;
-				regulator-max-microvolt = <1950000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "VUOTG_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "NFC_AVDD_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "VABB2_1.95V";
-				regulator-min-microvolt = <1950000>;
-				regulator-max-microvolt = <1950000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "VHSIC_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "VHSIC_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "CAM_SENSOR_CORE_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			ldo18_reg: LDO18 {
-				regulator-name = "CAM_ISP_SEN_IO_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo19_reg: LDO19 {
-				regulator-name = "VT_CAM_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo20_reg: LDO20 {
-				regulator-name = "VDDQ_PRE_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo21_reg: LDO21 {
-				regulator-name = "VTF_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
-			};
-
-			ldo22_reg: LDO22 {
-				regulator-name = "VMEM_VDD_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-			};
-
-			ldo23_reg: LDO23 {
-				regulator-name = "TSP_AVDD_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo24_reg: LDO24 {
-				regulator-name = "TSP_VDD_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo25_reg: LDO25 {
-				regulator-name = "LCD_VCC_3.3V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo26_reg: LDO26 {
-				regulator-name = "MOTOR_VCC_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "VMEM_1.2V_AP";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "VCC_SUB_1.35V";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "VCC_SUB_2.0V";
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "VMEM_VDDF_3.0V";
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <2850000>;
-				maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "CAM_ISP_CORE_1.2V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1200000>;
-				maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
-			};
-		};
-	};
-};
-
-&i2s0 {
-	pinctrl-0 = <&i2s0_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&mshc_0 {
-	num-slots = <1>;
-	broken-cd;
-	non-removable;
-	card-detect-delay = <200>;
-	vmmc-supply = <&ldo22_reg>;
-	clock-frequency = <400000000>;
-	samsung,dw-mshc-ciu-div = <0>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
-	pinctrl-names = "default";
-	status = "okay";
-	bus-width = <8>;
-	cap-mmc-highspeed;
-};
-
-&pmu_system_controller {
-	assigned-clocks = <&pmu_system_controller 0>;
-	assigned-clock-parents =  <&clock CLK_XUSBXTI>;
-};
-
-&pinctrl_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sleep0>;
-
-	sleep0: sleep-states {
-		PIN_SLP(gpa0-0, INPUT, NONE);
-		PIN_SLP(gpa0-1, OUT0, NONE);
-		PIN_SLP(gpa0-2, INPUT, NONE);
-		PIN_SLP(gpa0-3, INPUT, UP);
-		PIN_SLP(gpa0-4, INPUT, NONE);
-		PIN_SLP(gpa0-5, INPUT, DOWN);
-		PIN_SLP(gpa0-6, INPUT, DOWN);
-		PIN_SLP(gpa0-7, INPUT, UP);
-
-		PIN_SLP(gpa1-0, INPUT, DOWN);
-		PIN_SLP(gpa1-1, INPUT, DOWN);
-		PIN_SLP(gpa1-2, INPUT, DOWN);
-		PIN_SLP(gpa1-3, INPUT, DOWN);
-		PIN_SLP(gpa1-4, INPUT, DOWN);
-		PIN_SLP(gpa1-5, INPUT, DOWN);
-
-		PIN_SLP(gpb-0, INPUT, NONE);
-		PIN_SLP(gpb-1, INPUT, NONE);
-		PIN_SLP(gpb-2, INPUT, NONE);
-		PIN_SLP(gpb-3, INPUT, NONE);
-		PIN_SLP(gpb-4, INPUT, DOWN);
-		PIN_SLP(gpb-5, INPUT, UP);
-		PIN_SLP(gpb-6, INPUT, DOWN);
-		PIN_SLP(gpb-7, INPUT, DOWN);
-
-		PIN_SLP(gpc0-0, INPUT, DOWN);
-		PIN_SLP(gpc0-1, INPUT, DOWN);
-		PIN_SLP(gpc0-2, INPUT, DOWN);
-		PIN_SLP(gpc0-3, INPUT, DOWN);
-		PIN_SLP(gpc0-4, INPUT, DOWN);
-
-		PIN_SLP(gpc1-0, INPUT, NONE);
-		PIN_SLP(gpc1-1, PREV, NONE);
-		PIN_SLP(gpc1-2, INPUT, NONE);
-		PIN_SLP(gpc1-3, INPUT, NONE);
-		PIN_SLP(gpc1-4, INPUT, NONE);
-
-		PIN_SLP(gpd0-0, INPUT, DOWN);
-		PIN_SLP(gpd0-1, INPUT, DOWN);
-		PIN_SLP(gpd0-2, INPUT, NONE);
-		PIN_SLP(gpd0-3, INPUT, NONE);
-
-		PIN_SLP(gpd1-0, INPUT, DOWN);
-		PIN_SLP(gpd1-1, INPUT, DOWN);
-		PIN_SLP(gpd1-2, INPUT, NONE);
-		PIN_SLP(gpd1-3, INPUT, NONE);
-
-		PIN_SLP(gpf0-0, INPUT, NONE);
-		PIN_SLP(gpf0-1, INPUT, NONE);
-		PIN_SLP(gpf0-2, INPUT, DOWN);
-		PIN_SLP(gpf0-3, INPUT, DOWN);
-		PIN_SLP(gpf0-4, INPUT, NONE);
-		PIN_SLP(gpf0-5, INPUT, DOWN);
-		PIN_SLP(gpf0-6, INPUT, NONE);
-		PIN_SLP(gpf0-7, INPUT, DOWN);
-
-		PIN_SLP(gpf1-0, INPUT, DOWN);
-		PIN_SLP(gpf1-1, INPUT, DOWN);
-		PIN_SLP(gpf1-2, INPUT, DOWN);
-		PIN_SLP(gpf1-3, INPUT, DOWN);
-		PIN_SLP(gpf1-4, INPUT, NONE);
-		PIN_SLP(gpf1-5, INPUT, NONE);
-		PIN_SLP(gpf1-6, INPUT, DOWN);
-		PIN_SLP(gpf1-7, PREV, NONE);
-
-		PIN_SLP(gpf2-0, PREV, NONE);
-		PIN_SLP(gpf2-1, INPUT, DOWN);
-		PIN_SLP(gpf2-2, INPUT, DOWN);
-		PIN_SLP(gpf2-3, INPUT, DOWN);
-		PIN_SLP(gpf2-4, INPUT, DOWN);
-		PIN_SLP(gpf2-5, INPUT, DOWN);
-		PIN_SLP(gpf2-6, INPUT, NONE);
-		PIN_SLP(gpf2-7, INPUT, NONE);
-
-		PIN_SLP(gpf3-0, INPUT, NONE);
-		PIN_SLP(gpf3-1, PREV, NONE);
-		PIN_SLP(gpf3-2, PREV, NONE);
-		PIN_SLP(gpf3-3, PREV, NONE);
-		PIN_SLP(gpf3-4, OUT1, NONE);
-		PIN_SLP(gpf3-5, INPUT, DOWN);
-
-		PIN_SLP(gpj0-0, PREV, NONE);
-		PIN_SLP(gpj0-1, PREV, NONE);
-		PIN_SLP(gpj0-2, PREV, NONE);
-		PIN_SLP(gpj0-3, INPUT, DOWN);
-		PIN_SLP(gpj0-4, PREV, NONE);
-		PIN_SLP(gpj0-5, PREV, NONE);
-		PIN_SLP(gpj0-6, INPUT, DOWN);
-		PIN_SLP(gpj0-7, INPUT, DOWN);
-
-		PIN_SLP(gpj1-0, INPUT, DOWN);
-		PIN_SLP(gpj1-1, PREV, NONE);
-		PIN_SLP(gpj1-2, PREV, NONE);
-		PIN_SLP(gpj1-3, INPUT, DOWN);
-		PIN_SLP(gpj1-4, INPUT, DOWN);
-	};
-};
-
-&pinctrl_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sleep1>;
-
-	sleep1: sleep-states {
-		PIN_SLP(gpk0-0, PREV, NONE);
-		PIN_SLP(gpk0-1, PREV, NONE);
-		PIN_SLP(gpk0-2, OUT0, NONE);
-		PIN_SLP(gpk0-3, PREV, NONE);
-		PIN_SLP(gpk0-4, PREV, NONE);
-		PIN_SLP(gpk0-5, PREV, NONE);
-		PIN_SLP(gpk0-6, PREV, NONE);
-
-		PIN_SLP(gpk1-0, INPUT, DOWN);
-		PIN_SLP(gpk1-1, INPUT, DOWN);
-		PIN_SLP(gpk1-2, INPUT, DOWN);
-		PIN_SLP(gpk1-3, PREV, NONE);
-		PIN_SLP(gpk1-4, PREV, NONE);
-		PIN_SLP(gpk1-5, PREV, NONE);
-		PIN_SLP(gpk1-6, PREV, NONE);
-
-		PIN_SLP(gpk2-0, INPUT, DOWN);
-		PIN_SLP(gpk2-1, INPUT, DOWN);
-		PIN_SLP(gpk2-2, INPUT, DOWN);
-		PIN_SLP(gpk2-3, INPUT, DOWN);
-		PIN_SLP(gpk2-4, INPUT, DOWN);
-		PIN_SLP(gpk2-5, INPUT, DOWN);
-		PIN_SLP(gpk2-6, INPUT, DOWN);
-
-		PIN_SLP(gpk3-0, OUT0, NONE);
-		PIN_SLP(gpk3-1, INPUT, NONE);
-		PIN_SLP(gpk3-2, INPUT, DOWN);
-		PIN_SLP(gpk3-3, INPUT, NONE);
-		PIN_SLP(gpk3-4, INPUT, NONE);
-		PIN_SLP(gpk3-5, INPUT, NONE);
-		PIN_SLP(gpk3-6, INPUT, NONE);
-
-		PIN_SLP(gpl0-0, INPUT, DOWN);
-		PIN_SLP(gpl0-1, INPUT, DOWN);
-		PIN_SLP(gpl0-2, INPUT, DOWN);
-		PIN_SLP(gpl0-3, INPUT, DOWN);
-		PIN_SLP(gpl0-4, PREV, NONE);
-		PIN_SLP(gpl0-6, PREV, NONE);
-
-		PIN_SLP(gpl1-0, INPUT, DOWN);
-		PIN_SLP(gpl1-1, INPUT, DOWN);
-		PIN_SLP(gpl2-0, INPUT, DOWN);
-		PIN_SLP(gpl2-1, INPUT, DOWN);
-		PIN_SLP(gpl2-2, INPUT, DOWN);
-		PIN_SLP(gpl2-3, INPUT, DOWN);
-		PIN_SLP(gpl2-4, INPUT, DOWN);
-		PIN_SLP(gpl2-5, INPUT, DOWN);
-		PIN_SLP(gpl2-6, PREV, NONE);
-		PIN_SLP(gpl2-7, INPUT, DOWN);
-
-		PIN_SLP(gpm0-0, INPUT, DOWN);
-		PIN_SLP(gpm0-1, INPUT, DOWN);
-		PIN_SLP(gpm0-2, INPUT, DOWN);
-		PIN_SLP(gpm0-3, INPUT, DOWN);
-		PIN_SLP(gpm0-4, INPUT, DOWN);
-		PIN_SLP(gpm0-5, INPUT, DOWN);
-		PIN_SLP(gpm0-6, INPUT, DOWN);
-		PIN_SLP(gpm0-7, INPUT, DOWN);
-
-		PIN_SLP(gpm1-0, INPUT, DOWN);
-		PIN_SLP(gpm1-1, INPUT, DOWN);
-		PIN_SLP(gpm1-2, INPUT, NONE);
-		PIN_SLP(gpm1-3, INPUT, NONE);
-		PIN_SLP(gpm1-4, INPUT, NONE);
-		PIN_SLP(gpm1-5, INPUT, NONE);
-		PIN_SLP(gpm1-6, INPUT, DOWN);
-
-		PIN_SLP(gpm2-0, INPUT, NONE);
-		PIN_SLP(gpm2-1, INPUT, NONE);
-		PIN_SLP(gpm2-2, INPUT, DOWN);
-		PIN_SLP(gpm2-3, INPUT, DOWN);
-		PIN_SLP(gpm2-4, INPUT, DOWN);
-
-		PIN_SLP(gpm3-0, PREV, NONE);
-		PIN_SLP(gpm3-1, PREV, NONE);
-		PIN_SLP(gpm3-2, PREV, NONE);
-		PIN_SLP(gpm3-3, OUT1, NONE);
-		PIN_SLP(gpm3-4, INPUT, DOWN);
-		PIN_SLP(gpm3-5, INPUT, DOWN);
-		PIN_SLP(gpm3-6, INPUT, DOWN);
-		PIN_SLP(gpm3-7, INPUT, DOWN);
-
-		PIN_SLP(gpm4-0, INPUT, DOWN);
-		PIN_SLP(gpm4-1, INPUT, DOWN);
-		PIN_SLP(gpm4-2, INPUT, DOWN);
-		PIN_SLP(gpm4-3, INPUT, DOWN);
-		PIN_SLP(gpm4-4, INPUT, DOWN);
-		PIN_SLP(gpm4-5, INPUT, DOWN);
-		PIN_SLP(gpm4-6, INPUT, DOWN);
-		PIN_SLP(gpm4-7, INPUT, DOWN);
-
-		PIN_SLP(gpy0-0, INPUT, DOWN);
-		PIN_SLP(gpy0-1, INPUT, DOWN);
-		PIN_SLP(gpy0-2, INPUT, DOWN);
-		PIN_SLP(gpy0-3, INPUT, DOWN);
-		PIN_SLP(gpy0-4, INPUT, DOWN);
-		PIN_SLP(gpy0-5, INPUT, DOWN);
-
-		PIN_SLP(gpy1-0, INPUT, DOWN);
-		PIN_SLP(gpy1-1, INPUT, DOWN);
-		PIN_SLP(gpy1-2, INPUT, DOWN);
-		PIN_SLP(gpy1-3, INPUT, DOWN);
-
-		PIN_SLP(gpy2-0, PREV, NONE);
-		PIN_SLP(gpy2-1, INPUT, DOWN);
-		PIN_SLP(gpy2-2, INPUT, NONE);
-		PIN_SLP(gpy2-3, INPUT, NONE);
-		PIN_SLP(gpy2-4, INPUT, NONE);
-		PIN_SLP(gpy2-5, INPUT, NONE);
-
-		PIN_SLP(gpy3-0, INPUT, DOWN);
-		PIN_SLP(gpy3-1, INPUT, DOWN);
-		PIN_SLP(gpy3-2, INPUT, DOWN);
-		PIN_SLP(gpy3-3, INPUT, DOWN);
-		PIN_SLP(gpy3-4, INPUT, DOWN);
-		PIN_SLP(gpy3-5, INPUT, DOWN);
-		PIN_SLP(gpy3-6, INPUT, DOWN);
-		PIN_SLP(gpy3-7, INPUT, DOWN);
-
-		PIN_SLP(gpy4-0, INPUT, DOWN);
-		PIN_SLP(gpy4-1, INPUT, DOWN);
-		PIN_SLP(gpy4-2, INPUT, DOWN);
-		PIN_SLP(gpy4-3, INPUT, DOWN);
-		PIN_SLP(gpy4-4, INPUT, DOWN);
-		PIN_SLP(gpy4-5, INPUT, DOWN);
-		PIN_SLP(gpy4-6, INPUT, DOWN);
-		PIN_SLP(gpy4-7, INPUT, DOWN);
-
-		PIN_SLP(gpy5-0, INPUT, DOWN);
-		PIN_SLP(gpy5-1, INPUT, DOWN);
-		PIN_SLP(gpy5-2, INPUT, DOWN);
-		PIN_SLP(gpy5-3, INPUT, DOWN);
-		PIN_SLP(gpy5-4, INPUT, DOWN);
-		PIN_SLP(gpy5-5, INPUT, DOWN);
-		PIN_SLP(gpy5-6, INPUT, DOWN);
-		PIN_SLP(gpy5-7, INPUT, DOWN);
-
-		PIN_SLP(gpy6-0, INPUT, DOWN);
-		PIN_SLP(gpy6-1, INPUT, DOWN);
-		PIN_SLP(gpy6-2, INPUT, DOWN);
-		PIN_SLP(gpy6-3, INPUT, DOWN);
-		PIN_SLP(gpy6-4, INPUT, DOWN);
-		PIN_SLP(gpy6-5, INPUT, DOWN);
-		PIN_SLP(gpy6-6, INPUT, DOWN);
-		PIN_SLP(gpy6-7, INPUT, DOWN);
-	};
-};
-
-&pinctrl_2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sleep2>;
-
-	sleep2: sleep-states {
-		PIN_SLP(gpz-0, INPUT, DOWN);
-		PIN_SLP(gpz-1, INPUT, DOWN);
-		PIN_SLP(gpz-2, INPUT, DOWN);
-		PIN_SLP(gpz-3, INPUT, DOWN);
-		PIN_SLP(gpz-4, INPUT, DOWN);
-		PIN_SLP(gpz-5, INPUT, DOWN);
-		PIN_SLP(gpz-6, INPUT, DOWN);
-	};
-};
-
-&pinctrl_3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sleep3>;
-
-	sleep3: sleep-states {
-		PIN_SLP(gpv0-0, INPUT, DOWN);
-		PIN_SLP(gpv0-1, INPUT, DOWN);
-		PIN_SLP(gpv0-2, INPUT, DOWN);
-		PIN_SLP(gpv0-3, INPUT, DOWN);
-		PIN_SLP(gpv0-4, INPUT, DOWN);
-		PIN_SLP(gpv0-5, INPUT, DOWN);
-		PIN_SLP(gpv0-6, INPUT, DOWN);
-		PIN_SLP(gpv0-7, INPUT, DOWN);
-
-		PIN_SLP(gpv1-0, INPUT, DOWN);
-		PIN_SLP(gpv1-1, INPUT, DOWN);
-		PIN_SLP(gpv1-2, INPUT, DOWN);
-		PIN_SLP(gpv1-3, INPUT, DOWN);
-		PIN_SLP(gpv1-4, INPUT, DOWN);
-		PIN_SLP(gpv1-5, INPUT, DOWN);
-		PIN_SLP(gpv1-6, INPUT, DOWN);
-		PIN_SLP(gpv1-7, INPUT, DOWN);
-
-		PIN_SLP(gpv2-0, INPUT, DOWN);
-		PIN_SLP(gpv2-1, INPUT, DOWN);
-		PIN_SLP(gpv2-2, INPUT, DOWN);
-		PIN_SLP(gpv2-3, INPUT, DOWN);
-		PIN_SLP(gpv2-4, INPUT, DOWN);
-		PIN_SLP(gpv2-5, INPUT, DOWN);
-		PIN_SLP(gpv2-6, INPUT, DOWN);
-		PIN_SLP(gpv2-7, INPUT, DOWN);
-
-		PIN_SLP(gpv3-0, INPUT, DOWN);
-		PIN_SLP(gpv3-1, INPUT, DOWN);
-		PIN_SLP(gpv3-2, INPUT, DOWN);
-		PIN_SLP(gpv3-3, INPUT, DOWN);
-		PIN_SLP(gpv3-4, INPUT, DOWN);
-		PIN_SLP(gpv3-5, INPUT, DOWN);
-		PIN_SLP(gpv3-6, INPUT, DOWN);
-		PIN_SLP(gpv3-7, INPUT, DOWN);
-
-		PIN_SLP(gpv4-0, INPUT, DOWN);
-	};
-};
-
-&pwm {
-	pinctrl-0 = <&pwm0_out>;
-	pinctrl-names = "default";
-	samsung,pwm-outputs = <0>;
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&sdhci_2 {
-	bus-width = <4>;
-	cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
-	pinctrl-names = "default";
-	vmmc-supply = <&ldo21_reg>;
-	status = "okay";
-};
-
-&serial_0 {
-	status = "okay";
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
-
-&serial_3 {
-	status = "okay";
-};
-
-&spi_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_bus>;
-	cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	s5c73m3_spi: s5c73m3@0 {
-		compatible = "samsung,s5c73m3";
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-		controller-data {
-			samsung,spi-feedback-delay = <2>;
-		};
-	};
-};
-
-&tmu {
-	vtmu-supply = <&ldo10_reg>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
deleted file mode 100644
index 7ff03a7e8fb9..000000000000
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ /dev/null
@@ -1,731 +0,0 @@
-/*
- * Samsung's Exynos4412 SoC device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos4412 SoC device nodes are listed in this file. Exynos4412
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4412 SoC. As device tree coverage for Exynos4412 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include "exynos4.dtsi"
-#include "exynos4412-pinctrl.dtsi"
-#include "exynos4-cpu-thermal.dtsi"
-
-/ {
-	compatible = "samsung,exynos4412", "samsung,exynos4";
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		pinctrl3 = &pinctrl_3;
-		fimc-lite0 = &fimc_lite_0;
-		fimc-lite1 = &fimc_lite_1;
-		mshc0 = &mshc_0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@A00 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xA00>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			operating-points-v2 = <&cpu0_opp_table>;
-			cooling-min-level = <13>;
-			cooling-max-level = <7>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu@A01 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xA01>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@A02 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xA02>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@A03 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xA03>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-	};
-
-	cpu0_opp_table: opp_table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <900000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <900000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-400000000 {
-			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <925000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <950000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <975000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-700000000 {
-			opp-hz = /bits/ 64 <700000000>;
-			opp-microvolt = <987500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1000000>;
-			clock-latency-ns = <200000>;
-			opp-suspend;
-		};
-		opp-900000000 {
-			opp-hz = /bits/ 64 <900000000>;
-			opp-microvolt = <1037500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1087500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1100000000 {
-			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1137500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1187500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1300000000 {
-			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1250000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1400000000 {
-			opp-hz = /bits/ 64 <1400000000>;
-			opp-microvolt = <1287500>;
-			clock-latency-ns = <200000>;
-		};
-		cpu0_opp_1500: opp-1500000000 {
-			opp-hz = /bits/ 64 <1500000000>;
-			opp-microvolt = <1350000>;
-			clock-latency-ns = <200000>;
-			turbo-mode;
-		};
-	};
-
-	sysram@02020000 {
-		compatible = "mmio-sram";
-		reg = <0x02020000 0x40000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x02020000 0x40000>;
-
-		smp-sysram@0 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x0 0x1000>;
-		};
-
-		smp-sysram@2f000 {
-			compatible = "samsung,exynos4210-sysram-ns";
-			reg = <0x2f000 0x1000>;
-		};
-	};
-
-	pd_isp: isp-power-domain@10023CA0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023CA0 0x20>;
-		#power-domain-cells = <0>;
-		label = "ISP";
-	};
-
-	l2c: l2-cache-controller@10502000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x10502000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-		arm,tag-latency = <2 2 1>;
-		arm,data-latency = <3 2 1>;
-		arm,double-linefill = <1>;
-		arm,double-linefill-incr = <0>;
-		arm,double-linefill-wrap = <1>;
-		arm,prefetch-drop = <1>;
-		arm,prefetch-offset = <7>;
-	};
-
-	clock: clock-controller@10030000 {
-		compatible = "samsung,exynos4412-clock";
-		reg = <0x10030000 0x20000>;
-		#clock-cells = <1>;
-	};
-
-	mct@10050000 {
-		compatible = "samsung,exynos4412-mct";
-		reg = <0x10050000 0x800>;
-		interrupt-parent = <&mct_map>;
-		interrupts = <0>, <1>, <2>, <3>, <4>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-		clock-names = "fin_pll", "mct";
-
-		mct_map: mct-map {
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>,
-					<1 &combiner 12 5>,
-					<2 &combiner 12 6>,
-					<3 &combiner 12 7>,
-					<4 &gic 1 12 IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
-
-	watchdog: watchdog@10060000 {
-		compatible = "samsung,exynos5250-wdt";
-		reg = <0x10060000 0x100>;
-		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_WDT>;
-		clock-names = "watchdog";
-		samsung,syscon-phandle = <&pmu_system_controller>;
-	};
-
-	adc: adc@126C0000 {
-		compatible = "samsung,exynos-adc-v1";
-		reg = <0x126C0000 0x100>;
-		interrupt-parent = <&combiner>;
-		interrupts = <10 3>;
-		clocks = <&clock CLK_TSADC>;
-		clock-names = "adc";
-		#io-channel-cells = <1>;
-		io-channel-ranges;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		status = "disabled";
-	};
-
-	g2d: g2d@10800000 {
-		compatible = "samsung,exynos4212-g2d";
-		reg = <0x10800000 0x1000>;
-		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
-		clock-names = "sclk_fimg2d", "fimg2d";
-		iommus = <&sysmmu_g2d>;
-	};
-
-	camera {
-		clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
-			 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
-		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
-
-		/* fimc_[0-3] are configured outside, under phandles */
-		fimc_lite_0: fimc-lite@12390000 {
-			compatible = "samsung,exynos4212-fimc-lite";
-			reg = <0x12390000 0x1000>;
-			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&pd_isp>;
-			clocks = <&clock CLK_FIMC_LITE0>;
-			clock-names = "flite";
-			iommus = <&sysmmu_fimc_lite0>;
-			status = "disabled";
-		};
-
-		fimc_lite_1: fimc-lite@123A0000 {
-			compatible = "samsung,exynos4212-fimc-lite";
-			reg = <0x123A0000 0x1000>;
-			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&pd_isp>;
-			clocks = <&clock CLK_FIMC_LITE1>;
-			clock-names = "flite";
-			iommus = <&sysmmu_fimc_lite1>;
-			status = "disabled";
-		};
-
-		fimc_is: fimc-is@12000000 {
-			compatible = "samsung,exynos4212-fimc-is";
-			reg = <0x12000000 0x260000>;
-			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&pd_isp>;
-			clocks = <&clock CLK_FIMC_LITE0>,
-				 <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>,
-				 <&clock CLK_PPMUISPMX>,
-				 <&clock CLK_MOUT_MPLL_USER_T>,
-				 <&clock CLK_FIMC_ISP>, <&clock CLK_FIMC_DRC>,
-				 <&clock CLK_FIMC_FD>, <&clock CLK_MCUISP>,
-				 <&clock CLK_GICISP>, <&clock CLK_MCUCTL_ISP>,
-				 <&clock CLK_PWM_ISP>,
-				 <&clock CLK_DIV_ISP0>, <&clock CLK_DIV_ISP1>,
-				 <&clock CLK_DIV_MCUISP0>,
-				 <&clock CLK_DIV_MCUISP1>,
-				 <&clock CLK_UART_ISP_SCLK>,
-				 <&clock CLK_ACLK200>, <&clock CLK_DIV_ACLK200>,
-				 <&clock CLK_ACLK400_MCUISP>,
-				 <&clock CLK_DIV_ACLK400_MCUISP>;
-			clock-names = "lite0", "lite1", "ppmuispx",
-				      "ppmuispmx", "mpll", "isp",
-				      "drc", "fd", "mcuisp",
-				      "gicisp", "mcuctl_isp", "pwm_isp",
-				      "ispdiv0", "ispdiv1", "mcuispdiv0",
-				      "mcuispdiv1", "uart", "aclk200",
-				      "div_aclk200", "aclk400mcuisp",
-				      "div_aclk400mcuisp";
-			iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
-				 <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
-			iommu-names = "isp", "drc", "fd", "mcuctl";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			status = "disabled";
-
-			pmu@10020000 {
-				reg = <0x10020000 0x3000>;
-			};
-
-			i2c1_isp: i2c-isp@12140000 {
-				compatible = "samsung,exynos4212-i2c-isp";
-				reg = <0x12140000 0x100>;
-				clocks = <&clock CLK_I2C1_ISP>;
-				clock-names = "i2c_isp";
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-	};
-
-	mshc_0: mmc@12550000 {
-		compatible = "samsung,exynos4412-dw-mshc";
-		reg = <0x12550000 0x1000>;
-		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		fifo-depth = <0x80>;
-		clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>;
-		clock-names = "biu", "ciu";
-		status = "disabled";
-	};
-
-	sysmmu_g2d: sysmmu@10A40000{
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x10A40000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 7>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_fimc_isp: sysmmu@12260000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x12260000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <16 2>;
-		power-domains = <&pd_isp>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_ISP>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_fimc_drc: sysmmu@12270000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x12270000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <16 3>;
-		power-domains = <&pd_isp>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_DRC>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_fimc_fd: sysmmu@122A0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x122A0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <16 4>;
-		power-domains = <&pd_isp>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FD>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_fimc_mcuctl: sysmmu@122B0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x122B0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <16 5>;
-		power-domains = <&pd_isp>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_ISPCX>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_fimc_lite0: sysmmu@123B0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x123B0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <16 0>;
-		power-domains = <&pd_isp>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_LITE0>, <&clock CLK_FIMC_LITE0>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_fimc_lite1: sysmmu@123C0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x123C0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <16 1>;
-		power-domains = <&pd_isp>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_LITE1>, <&clock CLK_FIMC_LITE1>;
-		#iommu-cells = <0>;
-	};
-
-	bus_dmc: bus_dmc {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DIV_DMC>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_dmc_opp_table>;
-		status = "disabled";
-	};
-
-	bus_acp: bus_acp {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DIV_ACP>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_acp_opp_table>;
-		status = "disabled";
-	};
-
-	bus_c2c: bus_c2c {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DIV_C2C>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_dmc_opp_table>;
-		status = "disabled";
-	};
-
-	bus_dmc_opp_table: opp_table1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-134000000 {
-			opp-hz = /bits/ 64 <134000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-160000000 {
-			opp-hz = /bits/ 64 <160000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-267000000 {
-			opp-hz = /bits/ 64 <267000000>;
-			opp-microvolt = <950000>;
-		};
-		opp-400000000 {
-			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <1050000>;
-		};
-	};
-
-	bus_acp_opp_table: opp_table2 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-		opp-134000000 {
-			opp-hz = /bits/ 64 <134000000>;
-		};
-		opp-160000000 {
-			opp-hz = /bits/ 64 <160000000>;
-		};
-		opp-267000000 {
-			opp-hz = /bits/ 64 <267000000>;
-		};
-	};
-
-	bus_leftbus: bus_leftbus {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DIV_GDL>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_rightbus: bus_rightbus {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_DIV_GDR>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_display: bus_display {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_ACLK160>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_display_opp_table>;
-		status = "disabled";
-	};
-
-	bus_fsys: bus_fsys {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_ACLK133>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_fsys_opp_table>;
-		status = "disabled";
-	};
-
-	bus_peri: bus_peri {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_ACLK100>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_peri_opp_table>;
-		status = "disabled";
-	};
-
-	bus_mfc: bus_mfc {
-		compatible = "samsung,exynos-bus";
-		clocks = <&clock CLK_SCLK_MFC>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_leftbus_opp_table: opp_table3 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-134000000 {
-			opp-hz = /bits/ 64 <134000000>;
-			opp-microvolt = <925000>;
-		};
-		opp-160000000 {
-			opp-hz = /bits/ 64 <160000000>;
-			opp-microvolt = <950000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <1000000>;
-		};
-	};
-
-	bus_display_opp_table: opp_table4 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-160000000 {
-			opp-hz = /bits/ 64 <160000000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-		};
-	};
-
-	bus_fsys_opp_table: opp_table5 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-		opp-134000000 {
-			opp-hz = /bits/ 64 <134000000>;
-		};
-	};
-
-	bus_peri_opp_table: opp_table6 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-50000000 {
-			opp-hz = /bits/ 64 <50000000>;
-		};
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-	};
-
-	pmu {
-		interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
-	};
-};
-
-&combiner {
-	samsung,combiner-nr = <20>;
-	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&exynos_usbphy {
-	compatible = "samsung,exynos4x12-usb2-phy";
-	samsung,sysreg-phandle = <&sys_reg>;
-};
-
-&fimc_0 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,cam-if;
-};
-
-&fimc_1 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,cam-if;
-};
-
-&fimc_2 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,lcd-wb;
-	samsung,cam-if;
-};
-
-&fimc_3 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <1920 8192 1366 1920>;
-	samsung,rotators = <0>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,lcd-wb;
-};
-
-&gic {
-	cpu-offset = <0x4000>;
-};
-
-&hdmi {
-	compatible = "samsung,exynos4212-hdmi";
-};
-
-&jpeg_codec {
-	compatible = "samsung,exynos4212-jpeg";
-};
-
-&rotator {
-	compatible = "samsung,exynos4212-rotator";
-};
-
-&mixer {
-	compatible = "samsung,exynos4212-mixer";
-	clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
-	clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-		 <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>;
-};
-
-&pinctrl_0 {
-	compatible = "samsung,exynos4x12-pinctrl";
-	reg = <0x11400000 0x1000>;
-	interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&pinctrl_1 {
-	compatible = "samsung,exynos4x12-pinctrl";
-	reg = <0x11000000 0x1000>;
-	interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-
-	wakup_eint: wakeup-interrupt-controller {
-		compatible = "samsung,exynos4210-wakeup-eint";
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
-
-&pinctrl_2 {
-	compatible = "samsung,exynos4x12-pinctrl";
-	reg = <0x03860000 0x1000>;
-	interrupt-parent = <&combiner>;
-	interrupts = <10 0>;
-};
-
-&pinctrl_3 {
-	compatible = "samsung,exynos4x12-pinctrl";
-	reg = <0x106E0000 0x1000>;
-	interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&pmu_system_controller {
-	compatible = "samsung,exynos4412-pmu", "syscon";
-	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
-			"clkout4", "clkout8", "clkout9";
-	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
-		<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
-		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
-	#clock-cells = <1>;
-};
-
-&tmu {
-	compatible = "samsung,exynos4412-tmu";
-	interrupt-parent = <&combiner>;
-	interrupts = <2 4>;
-	reg = <0x100C0000 0x100>;
-	clocks = <&clock 383>;
-	clock-names = "tmu_apbif";
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
deleted file mode 100644
index 6a432460eb77..000000000000
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ /dev/null
@@ -1,560 +0,0 @@
-/*
- * Samsung's Exynos5250 based Arndale board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-#include "exynos5250.dtsi"
-
-/ {
-	model = "Insignal Arndale evaluation board based on EXYNOS5250";
-	compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC2,115200";
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		menu {
-			label = "SW-TACT2";
-			gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-			wakeup-source;
-		};
-
-		home {
-			label = "SW-TACT3";
-			gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-			wakeup-source;
-		};
-
-		up {
-			label = "SW-TACT4";
-			gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_UP>;
-			wakeup-source;
-		};
-
-		down {
-			label = "SW-TACT5";
-			gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_DOWN>;
-			wakeup-source;
-		};
-
-		back {
-			label = "SW-TACT6";
-			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-			wakeup-source;
-		};
-
-		wakeup {
-			label = "SW-TACT7";
-			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WAKEUP>;
-			wakeup-source;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		main_dc_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "MAIN_DC";
-		};
-
-		mmc_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "VDD_33ON_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpx1 1 GPIO_ACTIVE_LOW>;
-			enable-active-high;
-		};
-
-		reg_hdmi_en: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "hdmi-en";
-		};
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	// SMSC USB3503 connected in hardware only mode as a PHY
-	usb_hub: usb-hub {
-		compatible = "smsc,usb3503a";
-
-		reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
-		connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&buck2_reg>;
-};
-
-&dp {
-	status = "okay";
-	samsung,color-space = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x0a>;
-	samsung,lane-count = <4>;
-
-	display-timings {
-		native-mode = <&timing0>;
-
-		timing0: timing {
-			/* 2560x1600 DP panel */
-			clock-frequency = <50000>;
-			hactive = <2560>;
-			vactive = <1600>;
-			hfront-porch = <48>;
-			hback-porch = <80>;
-			hsync-len = <32>;
-			vback-porch = <16>;
-			vfront-porch = <8>;
-			vsync-len = <6>;
-		};
-	};
-};
-
-&fimd {
-	status = "okay";
-};
-
-&hdmi {
-	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>;
-	vdd_osc-supply = <&ldo10_reg>;
-	vdd_pll-supply = <&ldo8_reg>;
-	vdd-supply = <&ldo8_reg>;
-};
-
-&i2c_0 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <20000>;
-	samsung,i2c-slave-addr = <0x66>;
-
-	s5m8767_pmic@66 {
-		compatible = "samsung,s5m8767-pmic";
-		reg = <0x66>;
-		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-
-		vinb1-supply = <&main_dc_reg>;
-		vinb2-supply = <&main_dc_reg>;
-		vinb3-supply = <&main_dc_reg>;
-		vinb4-supply = <&main_dc_reg>;
-		vinb5-supply = <&main_dc_reg>;
-		vinb6-supply = <&main_dc_reg>;
-		vinb7-supply = <&main_dc_reg>;
-		vinb8-supply = <&main_dc_reg>;
-		vinb9-supply = <&main_dc_reg>;
-
-		vinl1-supply = <&buck7_reg>;
-		vinl2-supply = <&buck7_reg>;
-		vinl3-supply = <&buck7_reg>;
-		vinl4-supply = <&main_dc_reg>;
-		vinl5-supply = <&main_dc_reg>;
-		vinl6-supply = <&main_dc_reg>;
-		vinl7-supply = <&main_dc_reg>;
-		vinl8-supply = <&buck8_reg>;
-		vinl9-supply = <&buck8_reg>;
-
-		s5m8767,pmic-buck2-dvs-voltage = <1300000>;
-		s5m8767,pmic-buck3-dvs-voltage = <1100000>;
-		s5m8767,pmic-buck4-dvs-voltage = <1200000>;
-		s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
-		                              <&gpd1 1 GPIO_ACTIVE_HIGH>,
-		                              <&gpd1 2 GPIO_ACTIVE_HIGH>;
-		s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
-		                             <&gpx2 4 GPIO_ACTIVE_HIGH>,
-		                             <&gpx2 5 GPIO_ACTIVE_HIGH>;
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VDD_ALIVE_1.0V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VDD_28IO_DP_1.35V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "VDD_COMMON1_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "VDD_IOPERI_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				op_mode = <1>;
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "VDD_EXT_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "VDD_MPLL_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "VDD_XPLL_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "VDD_COMMON2_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "VDD_33ON_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				op_mode = <1>;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "VDD_COMMON3_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "VDD_ABB2_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "VDD_USB_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "VDDQ_C2C_W_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "VDD18_ABB0_3_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "VDD10_COMMON4_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "VDD18_HSIC_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "VDDQ_MMC2_3_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			ldo18_reg: LDO18 {
-				regulator-name = "VDD_33ON_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				op_mode = <1>;
-			};
-
-			ldo22_reg: LDO22 {
-				regulator-name = "EXT_33_OFF";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				op_mode = <1>;
-			};
-
-			ldo23_reg: LDO23 {
-				regulator-name = "EXT_28_OFF";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				op_mode = <1>;
-			};
-
-			ldo25_reg: LDO25 {
-				regulator-name = "PVDD_LDO25";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				op_mode = <1>;
-			};
-
-			ldo26_reg: LDO26 {
-				regulator-name = "EXT_18_OFF";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				op_mode = <1>;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <912500>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "VDD_MEM_1.35V";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1355000>;
-				regulator-always-on;
-				regulator-boot-on;
-				op_mode = <1>;
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "PVDD_BUCK7";
-				regulator-always-on;
-				op_mode = <1>;
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "PVDD_BUCK8";
-				regulator-always-on;
-				op_mode = <1>;
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "VDD_33_OFF_EXT1";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <3000000>;
-				op_mode = <1>;
-			};
-		};
-	};
-};
-
-&i2c_2 {
-	status = "okay";
-
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-	samsung,i2c-slave-addr = <0x50>;
-
-	hdmiddc@50 {
-		compatible = "samsung,exynos4210-hdmiddc";
-		reg = <0x50>;
-	};
-};
-
-&i2c_3 {
-	status = "okay";
-
-	wm1811a@1a {
-		compatible = "wlf,wm1811";
-		reg = <0x1a>;
-
-		AVDD2-supply = <&main_dc_reg>;
-		CPVDD-supply = <&main_dc_reg>;
-		DBVDD1-supply = <&main_dc_reg>;
-		DBVDD2-supply = <&main_dc_reg>;
-		DBVDD3-supply = <&main_dc_reg>;
-		LDO1VDD-supply = <&main_dc_reg>;
-		SPKVDD1-supply = <&main_dc_reg>;
-		SPKVDD2-supply = <&main_dc_reg>;
-
-		wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>;
-		wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&i2c_8 {
-	status = "okay";
-
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-	samsung,i2c-slave-addr = <0x38>;
-
-	hdmiphy@38 {
-		compatible = "samsung,exynos4212-hdmiphy";
-		reg = <0x38>;
-	};
-};
-
-&i2c_9 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <40000>;
-	samsung,i2c-slave-addr = <0x38>;
-
-	sata_phy_i2c:sata-phy@38 {
-		compatible = "samsung,exynos-sataphy-i2c";
-		reg = <0x38>;
-	};
-};
-
-&i2s0 {
-	status = "okay";
-};
-
-&mmc_0 {
-	status = "okay";
-	num-slots = <1>;
-	broken-cd;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	vmmc-supply = <&mmc_reg>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-	bus-width = <8>;
-	cap-mmc-highspeed;
-};
-
-&mmc_2 {
-	status = "okay";
-	num-slots = <1>;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	vmmc-supply = <&mmc_reg>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-	bus-width = <4>;
-	disable-wp;
-	cap-sd-highspeed;
-};
-
-&rtc {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&sata_phy {
-	status = "okay";
-	samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
-};
diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
deleted file mode 100644
index 90560c316f64..000000000000
--- a/arch/arm/boot/dts/exynos5250-snow-rev5.dts
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Google Snow Rev 5+ board device tree source
- *
- * Copyright (c) 2012 Google, Inc
- * Copyright (c) 2015 Samsung Electronics Co., Ltd.
- *             http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include "exynos5250-snow-common.dtsi"
-
-/ {
-	model = "Google Snow Rev 5+";
-	compatible = "google,snow-rev5", "samsung,exynos5250",
-		"samsung,exynos5";
-
-	sound {
-		compatible = "google,snow-audio-max98090";
-
-		samsung,model = "Snow-I2S-MAX98090";
-		samsung,audio-codec = <&max98090>;
-	};
-};
-
-&i2c_7 {
-	max98090: codec@10 {
-		compatible = "maxim,max98090";
-		reg = <0x10>;
-		interrupts = <4 IRQ_TYPE_NONE>;
-		interrupt-parent = <&gpx0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&max98090_irq>;
-	};
-};
-
-&pinctrl_0 {
-	max98090_irq: max98090-irq {
-		samsung,pins = "gpx0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
deleted file mode 100644
index df48f2cc96f7..000000000000
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Google Snow board device tree source
- *
- * Copyright (c) 2012 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include "exynos5250-snow-common.dtsi"
-
-/ {
-	model = "Google Snow";
-	compatible = "google,snow-rev4", "google,snow", "samsung,exynos5250",
-		"samsung,exynos5";
-
-	sound {
-		compatible = "google,snow-audio-max98095";
-
-		samsung,model = "Snow-I2S-MAX98095";
-		samsung,audio-codec = <&max98095>;
-	};
-};
-
-&i2c_7 {
-	max98095: codec@11 {
-		compatible = "maxim,max98095";
-		reg = <0x11>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&max98095_en>;
-	};
-};
-
-&pinctrl_0 {
-	max98095_en: max98095-en {
-		samsung,pins = "gpx1-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
deleted file mode 100644
index 8dbeb873e99c..000000000000
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ /dev/null
@@ -1,1087 +0,0 @@
-/*
- * SAMSUNG EXYNOS5250 SoC device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * SAMSUNG EXYNOS5250 SoC device nodes are listed in this file.
- * EXYNOS5250 based board files can include this file and provide
- * values for board specfic bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases,
- * additional nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <dt-bindings/clock/exynos5250.h>
-#include "exynos5.dtsi"
-#include "exynos4-cpu-thermal.dtsi"
-#include <dt-bindings/clock/exynos-audss-clk.h>
-
-/ {
-	compatible = "samsung,exynos5250", "samsung,exynos5";
-
-	aliases {
-		spi0 = &spi_0;
-		spi1 = &spi_1;
-		spi2 = &spi_2;
-		gsc0 = &gsc_0;
-		gsc1 = &gsc_1;
-		gsc2 = &gsc_2;
-		gsc3 = &gsc_3;
-		mshc0 = &mmc_0;
-		mshc1 = &mmc_1;
-		mshc2 = &mmc_2;
-		mshc3 = &mmc_3;
-		i2c4 = &i2c_4;
-		i2c5 = &i2c_5;
-		i2c6 = &i2c_6;
-		i2c7 = &i2c_7;
-		i2c8 = &i2c_8;
-		i2c9 = &i2c_9;
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		pinctrl3 = &pinctrl_3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-			clock-frequency = <1700000000>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			clock-latency = <140000>;
-
-			operating-points = <
-				1700000 1300000
-				1600000 1250000
-				1500000 1225000
-				1400000 1200000
-				1300000 1150000
-				1200000 1125000
-				1100000 1100000
-				1000000 1075000
-				 900000 1050000
-				 800000 1025000
-				 700000 1012500
-				 600000 1000000
-				 500000  975000
-				 400000  950000
-				 300000  937500
-				 200000  925000
-			>;
-			cooling-min-level = <15>;
-			cooling-max-level = <9>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-			clock-frequency = <1700000000>;
-		};
-	};
-
-	soc: soc {
-		sysram@02020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x30000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x30000>;
-
-			smp-sysram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sysram@2f000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x2f000 0x1000>;
-			};
-		};
-
-		pd_gsc: gsc-power-domain@10044000 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10044000 0x20>;
-			#power-domain-cells = <0>;
-			label = "GSC";
-		};
-
-		pd_mfc: mfc-power-domain@10044040 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10044040 0x20>;
-			#power-domain-cells = <0>;
-			label = "MFC";
-		};
-
-		pd_disp1: disp1-power-domain@100440A0 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x100440A0 0x20>;
-			#power-domain-cells = <0>;
-			label = "DISP1";
-			clocks = <&clock CLK_FIN_PLL>,
-				 <&clock CLK_MOUT_ACLK200_DISP1_SUB>,
-				 <&clock CLK_MOUT_ACLK300_DISP1_SUB>;
-			clock-names = "oscclk", "clk0", "clk1";
-		};
-
-		clock: clock-controller@10010000 {
-			compatible = "samsung,exynos5250-clock";
-			reg = <0x10010000 0x30000>;
-			#clock-cells = <1>;
-		};
-
-		clock_audss: audss-clock-controller@3810000 {
-			compatible = "samsung,exynos5250-audss-clock";
-			reg = <0x03810000 0x0C>;
-			#clock-cells = <1>;
-			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
-				 <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
-			clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
-		};
-
-		timer {
-			compatible = "arm,armv7-timer";
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-			/*
-			 * Unfortunately we need this since some versions
-			 * of U-Boot on Exynos don't set the CNTFRQ register,
-			 * so we need the value from DT.
-			 */
-			clock-frequency = <24000000>;
-		};
-
-		mct@101C0000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x101C0000 0x800>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&mct_map>;
-			interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
-				     <4 0>, <5 0>;
-			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-
-			mct_map: mct-map {
-				#interrupt-cells = <2>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = <0x0 0 &combiner 23 3>,
-						<0x1 0 &combiner 23 4>,
-						<0x2 0 &combiner 25 2>,
-						<0x3 0 &combiner 25 3>,
-						<0x4 0 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>,
-						<0x5 0 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		pmu {
-			compatible = "arm,cortex-a15-pmu";
-			interrupt-parent = <&combiner>;
-			interrupts = <1 2>, <22 4>;
-		};
-
-		pinctrl_0: pinctrl@11400000 {
-			compatible = "samsung,exynos5250-pinctrl";
-			reg = <0x11400000 0x1000>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-
-			wakup_eint: wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		pinctrl_1: pinctrl@13400000 {
-			compatible = "samsung,exynos5250-pinctrl";
-			reg = <0x13400000 0x1000>;
-			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_2: pinctrl@10d10000 {
-			compatible = "samsung,exynos5250-pinctrl";
-			reg = <0x10d10000 0x1000>;
-			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_3: pinctrl@03860000 {
-			compatible = "samsung,exynos5250-pinctrl";
-			reg = <0x03860000 0x1000>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pmu_system_controller: system-controller@10040000 {
-			compatible = "samsung,exynos5250-pmu", "syscon";
-			reg = <0x10040000 0x5000>;
-			clock-names = "clkout16";
-			clocks = <&clock CLK_FIN_PLL>;
-			#clock-cells = <1>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupt-parent = <&gic>;
-		};
-
-		watchdog@101D0000 {
-			compatible = "samsung,exynos5250-wdt";
-			reg = <0x101D0000 0x100>;
-			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_WDT>;
-			clock-names = "watchdog";
-			samsung,syscon-phandle = <&pmu_system_controller>;
-		};
-
-		g2d@10850000 {
-			compatible = "samsung,exynos5250-g2d";
-			reg = <0x10850000 0x1000>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_G2D>;
-			clock-names = "fimg2d";
-			iommus = <&sysmmu_g2d>;
-		};
-
-		mfc: codec@11000000 {
-			compatible = "samsung,mfc-v6";
-			reg = <0x11000000 0x10000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&pd_mfc>;
-			clocks = <&clock CLK_MFC>;
-			clock-names = "mfc";
-			iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
-			iommu-names = "left", "right";
-		};
-
-		rotator: rotator@11C00000 {
-			compatible = "samsung,exynos5250-rotator";
-			reg = <0x11C00000 0x64>;
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_ROTATOR>;
-			clock-names = "rotator";
-			iommus = <&sysmmu_rotator>;
-		};
-
-		tmu: tmu@10060000 {
-			compatible = "samsung,exynos5250-tmu";
-			reg = <0x10060000 0x100>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_TMU>;
-			clock-names = "tmu_apbif";
-			#include "exynos4412-tmu-sensor-conf.dtsi"
-		};
-
-		sata: sata@122F0000 {
-			compatible = "snps,dwc-ahci";
-			samsung,sata-freq = <66>;
-			reg = <0x122F0000 0x1ff>;
-			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
-			clock-names = "sata", "sclk_sata";
-			phys = <&sata_phy>;
-			phy-names = "sata-phy";
-			status = "disabled";
-		};
-
-		sata_phy: sata-phy@12170000 {
-			compatible = "samsung,exynos5250-sata-phy";
-			reg = <0x12170000 0x1ff>;
-			clocks = <&clock CLK_SATA_PHYCTRL>;
-			clock-names = "sata_phyctrl";
-			#phy-cells = <0>;
-			samsung,syscon-phandle = <&pmu_system_controller>;
-			status = "disabled";
-		};
-
-		/* i2c_0-3 are defined in exynos5.dtsi */
-		i2c_4: i2c@12CA0000 {
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12CA0000 0x100>;
-			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_I2C4>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c4_bus>;
-			status = "disabled";
-		};
-
-		i2c_5: i2c@12CB0000 {
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12CB0000 0x100>;
-			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_I2C5>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c5_bus>;
-			status = "disabled";
-		};
-
-		i2c_6: i2c@12CC0000 {
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12CC0000 0x100>;
-			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_I2C6>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c6_bus>;
-			status = "disabled";
-		};
-
-		i2c_7: i2c@12CD0000 {
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12CD0000 0x100>;
-			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_I2C7>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c7_bus>;
-			status = "disabled";
-		};
-
-		i2c_8: i2c@12CE0000 {
-			compatible = "samsung,s3c2440-hdmiphy-i2c";
-			reg = <0x12CE0000 0x1000>;
-			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_I2C_HDMI>;
-			clock-names = "i2c";
-			status = "disabled";
-		};
-
-		i2c_9: i2c@121D0000 {
-			compatible = "samsung,exynos5-sata-phy-i2c";
-			reg = <0x121D0000 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_SATA_PHYI2C>;
-			clock-names = "i2c";
-			status = "disabled";
-		};
-
-		spi_0: spi@12d20000 {
-			compatible = "samsung,exynos4210-spi";
-			status = "disabled";
-			reg = <0x12d20000 0x100>;
-			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma0 5
-				&pdma0 4>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
-			clock-names = "spi", "spi_busclk0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi0_bus>;
-		};
-
-		spi_1: spi@12d30000 {
-			compatible = "samsung,exynos4210-spi";
-			status = "disabled";
-			reg = <0x12d30000 0x100>;
-			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma1 5
-				&pdma1 4>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
-			clock-names = "spi", "spi_busclk0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_bus>;
-		};
-
-		spi_2: spi@12d40000 {
-			compatible = "samsung,exynos4210-spi";
-			status = "disabled";
-			reg = <0x12d40000 0x100>;
-			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma0 7
-				&pdma0 6>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
-			clock-names = "spi", "spi_busclk0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi2_bus>;
-		};
-
-		mmc_0: mmc@12200000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x12200000 0x1000>;
-			clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			status = "disabled";
-		};
-
-		mmc_1: mmc@12210000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x12210000 0x1000>;
-			clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			status = "disabled";
-		};
-
-		mmc_2: mmc@12220000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x12220000 0x1000>;
-			clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			status = "disabled";
-		};
-
-		mmc_3: mmc@12230000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12230000 0x1000>;
-			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			status = "disabled";
-		};
-
-		i2s0: i2s@03830000 {
-			compatible = "samsung,s5pv210-i2s";
-			status = "disabled";
-			reg = <0x03830000 0x100>;
-			dmas = <&pdma0 10
-				&pdma0 9
-				&pdma0 8>;
-			dma-names = "tx", "rx", "tx-sec";
-			clocks = <&clock_audss EXYNOS_I2S_BUS>,
-				<&clock_audss EXYNOS_I2S_BUS>,
-				<&clock_audss EXYNOS_SCLK_I2S>;
-			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-			samsung,idma-addr = <0x03000000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2s0_bus>;
-		};
-
-		i2s1: i2s@12D60000 {
-			compatible = "samsung,s3c6410-i2s";
-			status = "disabled";
-			reg = <0x12D60000 0x100>;
-			dmas = <&pdma1 12
-				&pdma1 11>;
-			dma-names = "tx", "rx";
-			clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
-			clock-names = "iis", "i2s_opclk0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2s1_bus>;
-		};
-
-		i2s2: i2s@12D70000 {
-			compatible = "samsung,s3c6410-i2s";
-			status = "disabled";
-			reg = <0x12D70000 0x100>;
-			dmas = <&pdma0 12
-				&pdma0 11>;
-			dma-names = "tx", "rx";
-			clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
-			clock-names = "iis", "i2s_opclk0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2s2_bus>;
-		};
-
-		usb_dwc3 {
-			compatible = "samsung,exynos5250-dwusb3";
-			clocks = <&clock CLK_USB3>;
-			clock-names = "usbdrd30";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			usbdrd_dwc3: dwc3@12000000 {
-				compatible = "synopsys,dwc3";
-				reg = <0x12000000 0x10000>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};
-
-		usbdrd_phy: phy@12100000 {
-			compatible = "samsung,exynos5250-usbdrd-phy";
-			reg = <0x12100000 0x100>;
-			clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
-			clock-names = "phy", "ref";
-			samsung,pmu-syscon = <&pmu_system_controller>;
-			#phy-cells = <1>;
-		};
-
-		ehci: usb@12110000 {
-			compatible = "samsung,exynos4210-ehci";
-			reg = <0x12110000 0x100>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks = <&clock CLK_USB2>;
-			clock-names = "usbhost";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				phys = <&usb2_phy_gen 1>;
-			};
-		};
-
-		ohci: usb@12120000 {
-			compatible = "samsung,exynos4210-ohci";
-			reg = <0x12120000 0x100>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks = <&clock CLK_USB2>;
-			clock-names = "usbhost";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				phys = <&usb2_phy_gen 1>;
-			};
-		};
-
-		usb2_phy_gen: phy@12130000 {
-			compatible = "samsung,exynos5250-usb2-phy";
-			reg = <0x12130000 0x100>;
-			clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>;
-			clock-names = "phy", "ref";
-			#phy-cells = <1>;
-			samsung,sysreg-phandle = <&sysreg_system_controller>;
-			samsung,pmureg-phandle = <&pmu_system_controller>;
-		};
-
-		amba {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			interrupt-parent = <&gic>;
-			ranges;
-
-			pdma0: pdma@121A0000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x121A0000 0x1000>;
-				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			pdma1: pdma@121B0000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x121B0000 0x1000>;
-				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			mdma0: mdma@10800000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x10800000 0x1000>;
-				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_MDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <1>;
-			};
-
-			mdma1: mdma@11C10000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x11C10000 0x1000>;
-				interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_MDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <1>;
-			};
-		};
-
-		gsc_0:  gsc@13e00000 {
-			compatible = "samsung,exynos5-gsc";
-			reg = <0x13e00000 0x1000>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&pd_gsc>;
-			clocks = <&clock CLK_GSCL0>;
-			clock-names = "gscl";
-			iommu = <&sysmmu_gsc0>;
-		};
-
-		gsc_1:  gsc@13e10000 {
-			compatible = "samsung,exynos5-gsc";
-			reg = <0x13e10000 0x1000>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&pd_gsc>;
-			clocks = <&clock CLK_GSCL1>;
-			clock-names = "gscl";
-			iommu = <&sysmmu_gsc1>;
-		};
-
-		gsc_2:  gsc@13e20000 {
-			compatible = "samsung,exynos5-gsc";
-			reg = <0x13e20000 0x1000>;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&pd_gsc>;
-			clocks = <&clock CLK_GSCL2>;
-			clock-names = "gscl";
-			iommu = <&sysmmu_gsc2>;
-		};
-
-		gsc_3:  gsc@13e30000 {
-			compatible = "samsung,exynos5-gsc";
-			reg = <0x13e30000 0x1000>;
-			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&pd_gsc>;
-			clocks = <&clock CLK_GSCL3>;
-			clock-names = "gscl";
-			iommu = <&sysmmu_gsc3>;
-		};
-
-		hdmi: hdmi@14530000 {
-			compatible = "samsung,exynos4212-hdmi";
-			reg = <0x14530000 0x70000>;
-			power-domains = <&pd_disp1>;
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
-				 <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
-				 <&clock CLK_MOUT_HDMI>;
-			clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
-					"sclk_hdmiphy", "mout_hdmi";
-			samsung,syscon-phandle = <&pmu_system_controller>;
-		};
-
-		hdmicec: cec@101B0000 {
-			compatible = "samsung,s5p-cec";
-			reg = <0x101B0000 0x200>;
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_HDMI_CEC>;
-			clock-names = "hdmicec";
-			samsung,syscon-phandle = <&pmu_system_controller>;
-			hdmi-phandle = <&hdmi>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&hdmi_cec>;
-			status = "disabled";
-		};
-
-		mixer@14450000 {
-			compatible = "samsung,exynos5250-mixer";
-			reg = <0x14450000 0x10000>;
-			power-domains = <&pd_disp1>;
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-				 <&clock CLK_SCLK_HDMI>;
-			clock-names = "mixer", "hdmi", "sclk_hdmi";
-			iommus = <&sysmmu_tv>;
-		};
-
-		dp_phy: video-phy {
-			compatible = "samsung,exynos5250-dp-video-phy";
-			samsung,pmu-syscon = <&pmu_system_controller>;
-			#phy-cells = <0>;
-		};
-
-		adc: adc@12D10000 {
-			compatible = "samsung,exynos-adc-v1";
-			reg = <0x12D10000 0x100>;
-			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_ADC>;
-			clock-names = "adc";
-			#io-channel-cells = <1>;
-			io-channel-ranges;
-			samsung,syscon-phandle = <&pmu_system_controller>;
-			status = "disabled";
-		};
-
-		sss@10830000 {
-			compatible = "samsung,exynos4210-secss";
-			reg = <0x10830000 0x300>;
-			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_SSS>;
-			clock-names = "secss";
-		};
-
-		sysmmu_g2d: sysmmu@10A60000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10A60000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <24 5>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_mfc_r: sysmmu@11200000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11200000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <6 2>;
-			power-domains = <&pd_mfc>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_mfc_l: sysmmu@11210000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11210000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <8 5>;
-			power-domains = <&pd_mfc>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_rotator: sysmmu@11D40000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11D40000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <4 0>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_jpeg: sysmmu@11F20000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11F20000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <4 2>;
-			power-domains = <&pd_gsc>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_isp: sysmmu@13260000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13260000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <10 6>;
-			clock-names = "sysmmu";
-			clocks = <&clock CLK_SMMU_FIMC_ISP>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_drc: sysmmu@13270000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13270000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <11 6>;
-			clock-names = "sysmmu";
-			clocks = <&clock CLK_SMMU_FIMC_DRC>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_fd: sysmmu@132A0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132A0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <5 0>;
-			clock-names = "sysmmu";
-			clocks = <&clock CLK_SMMU_FIMC_FD>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_scc: sysmmu@13280000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13280000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <5 2>;
-			clock-names = "sysmmu";
-			clocks = <&clock CLK_SMMU_FIMC_SCC>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_scp: sysmmu@13290000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13290000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <3 6>;
-			clock-names = "sysmmu";
-			clocks = <&clock CLK_SMMU_FIMC_SCP>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_mcuctl: sysmmu@132B0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132B0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <5 4>;
-			clock-names = "sysmmu";
-			clocks = <&clock CLK_SMMU_FIMC_MCU>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_odc: sysmmu@132C0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132C0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <11 0>;
-			clock-names = "sysmmu";
-			clocks = <&clock CLK_SMMU_FIMC_ODC>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_dis0: sysmmu@132D0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132D0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <10 4>;
-			clock-names = "sysmmu";
-			clocks = <&clock CLK_SMMU_FIMC_DIS0>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_dis1: sysmmu@132E0000{
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132E0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <9 4>;
-			clock-names = "sysmmu";
-			clocks = <&clock CLK_SMMU_FIMC_DIS1>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_3dnr: sysmmu@132F0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132F0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <5 6>;
-			clock-names = "sysmmu";
-			clocks = <&clock CLK_SMMU_FIMC_3DNR>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_lite0: sysmmu@13C40000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13C40000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <3 4>;
-			power-domains = <&pd_gsc>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_lite1: sysmmu@13C50000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13C50000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <24 1>;
-			power-domains = <&pd_gsc>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_gsc0: sysmmu@13E80000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13E80000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <2 0>;
-			power-domains = <&pd_gsc>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_gsc1: sysmmu@13E90000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13E90000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <2 2>;
-			power-domains = <&pd_gsc>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_gsc2: sysmmu@13EA0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13EA0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <2 4>;
-			power-domains = <&pd_gsc>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_gsc3: sysmmu@13EB0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13EB0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <2 6>;
-			power-domains = <&pd_gsc>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimd1: sysmmu@14640000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x14640000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <3 2>;
-			power-domains = <&pd_disp1>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_tv: sysmmu@14650000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x14650000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <7 4>;
-			power-domains = <&pd_disp1>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
-			#iommu-cells = <0>;
-		};
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tmu 0>;
-
-			cooling-maps {
-				map0 {
-				     /* Corresponds to 800MHz at freq_table */
-				     cooling-device = <&cpu0 9 9>;
-				};
-				map1 {
-				     /* Corresponds to 200MHz at freq_table */
-				     cooling-device = <&cpu0 15 15>;
-			       };
-		       };
-		};
-	};
-};
-
-&dp {
-	power-domains = <&pd_disp1>;
-	clocks = <&clock CLK_DP>;
-	clock-names = "dp";
-	phys = <&dp_phy>;
-	phy-names = "dp";
-};
-
-&fimd {
-	power-domains = <&pd_disp1>;
-	clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
-	clock-names = "sclk_fimd", "fimd";
-	iommus = <&sysmmu_fimd1>;
-};
-
-&i2c_0 {
-	clocks = <&clock CLK_I2C0>;
-	clock-names = "i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_bus>;
-};
-
-&i2c_1 {
-	clocks = <&clock CLK_I2C1>;
-	clock-names = "i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_bus>;
-};
-
-&i2c_2 {
-	clocks = <&clock CLK_I2C2>;
-	clock-names = "i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_bus>;
-};
-
-&i2c_3 {
-	clocks = <&clock CLK_I2C3>;
-	clock-names = "i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_bus>;
-};
-
-&pwm {
-	clocks = <&clock CLK_PWM>;
-	clock-names = "timers";
-};
-
-&rtc {
-	clocks = <&clock CLK_RTC>;
-	clock-names = "rtc";
-	interrupt-parent = <&pmu_system_controller>;
-	status = "disabled";
-};
-
-&serial_0 {
-	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-	clock-names = "uart", "clk_uart_baud0";
-	dmas = <&pdma0 13>, <&pdma0 14>;
-	dma-names = "rx", "tx";
-};
-
-&serial_1 {
-	clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-	clock-names = "uart", "clk_uart_baud0";
-	dmas = <&pdma1 15>, <&pdma1 16>;
-	dma-names = "rx", "tx";
-};
-
-&serial_2 {
-	clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-	clock-names = "uart", "clk_uart_baud0";
-	dmas = <&pdma0 15>, <&pdma0 16>;
-	dma-names = "rx", "tx";
-};
-
-&serial_3 {
-	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
-	clock-names = "uart", "clk_uart_baud0";
-	dmas = <&pdma1 17>, <&pdma1 18>;
-	dma-names = "rx", "tx";
-};
-
-#include "exynos5250-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts
deleted file mode 100644
index d0cc300cfb4b..000000000000
--- a/arch/arm/boot/dts/exynos5260-xyref5260.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * SAMSUNG XYREF5260 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5260.dtsi"
-
-/ {
-	model = "SAMSUNG XYREF5260 board based on EXYNOS5260";
-	compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5";
-
-	memory@20000000 {
-		device_type = "memory";
-		reg = <0x20000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC2,115200";
-	};
-
-	fin_pll: xxti {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "fin_pll";
-		#clock-cells = <0>;
-	};
-
-	xrtcxti: xrtcxti {
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-		clock-output-names = "xrtcxti";
-		#clock-cells = <0>;
-	};
-};
-
-&pinctrl_0 {
-	hdmi_hpd_irq: hdmi-hpd-irq {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&mmc_0 {
-	status = "okay";
-	num-slots = <1>;
-	broken-cd;
-	bypass-smu;
-	cap-mmc-highspeed;
-	supports-hs200-mode; /* 200 MHz */
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
-	bus-width = <8>;
-};
-
-&mmc_2 {
-	status = "okay";
-	num-slots = <1>;
-	cap-sd-highspeed;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
-	bus-width = <4>;
-	disable-wp;
-};
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
deleted file mode 100644
index 5e88c9645975..000000000000
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ /dev/null
@@ -1,324 +0,0 @@
-/*
- * SAMSUNG EXYNOS5260 SoC device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <dt-bindings/clock/exynos5260-clk.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "samsung,exynos5260", "samsung,exynos5";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x0>;
-			cci-control-port = <&cci_control1>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x1>;
-			cci-control-port = <&cci_control1>;
-		};
-
-		cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-			cci-control-port = <&cci_control0>;
-		};
-
-		cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-			cci-control-port = <&cci_control0>;
-		};
-
-		cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x102>;
-			cci-control-port = <&cci_control0>;
-		};
-
-		cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x103>;
-			cci-control-port = <&cci_control0>;
-		};
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		clock_top: clock-controller@10010000 {
-			compatible = "samsung,exynos5260-clock-top";
-			reg = <0x10010000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_peri: clock-controller@10200000 {
-			compatible = "samsung,exynos5260-clock-peri";
-			reg = <0x10200000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_egl: clock-controller@10600000 {
-			compatible = "samsung,exynos5260-clock-egl";
-			reg = <0x10600000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_kfc: clock-controller@10700000 {
-			compatible = "samsung,exynos5260-clock-kfc";
-			reg = <0x10700000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_g2d: clock-controller@10A00000 {
-			compatible = "samsung,exynos5260-clock-g2d";
-			reg = <0x10A00000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_mif: clock-controller@10CE0000 {
-			compatible = "samsung,exynos5260-clock-mif";
-			reg = <0x10CE0000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_mfc: clock-controller@11090000 {
-			compatible = "samsung,exynos5260-clock-mfc";
-			reg = <0x11090000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_g3d: clock-controller@11830000 {
-			compatible = "samsung,exynos5260-clock-g3d";
-			reg = <0x11830000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_fsys: clock-controller@122E0000 {
-			compatible = "samsung,exynos5260-clock-fsys";
-			reg = <0x122E0000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_aud: clock-controller@128C0000 {
-			compatible = "samsung,exynos5260-clock-aud";
-			reg = <0x128C0000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_isp: clock-controller@133C0000 {
-			compatible = "samsung,exynos5260-clock-isp";
-			reg = <0x133C0000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_gscl: clock-controller@13F00000 {
-			compatible = "samsung,exynos5260-clock-gscl";
-			reg = <0x13F00000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_disp: clock-controller@14550000 {
-			compatible = "samsung,exynos5260-clock-disp";
-			reg = <0x14550000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		gic: interrupt-controller@10481000 {
-			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-controller;
-			reg = <0x10481000 0x1000>,
-				<0x10482000 0x2000>,
-				<0x10484000 0x2000>,
-				<0x10486000 0x2000>;
-			interrupts = <GIC_PPI 9
-					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		};
-
-		chipid: chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
-			reg = <0x10000000 0x100>;
-		};
-
-		mct: mct@100B0000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x100B0000 0x1000>;
-			clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		cci: cci@10F00000 {
-			compatible = "arm,cci-400";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x10F00000 0x1000>;
-			ranges = <0x0 0x10F00000 0x6000>;
-
-			cci_control0: slave-if@4000 {
-				compatible = "arm,cci-400-ctrl-if";
-				interface-type = "ace";
-				reg = <0x4000 0x1000>;
-			};
-
-			cci_control1: slave-if@5000 {
-				compatible = "arm,cci-400-ctrl-if";
-				interface-type = "ace";
-				reg = <0x5000 0x1000>;
-			};
-		};
-
-		pinctrl_0: pinctrl@11600000 {
-			compatible = "samsung,exynos5260-pinctrl";
-			reg = <0x11600000 0x1000>;
-			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-
-			wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		pinctrl_1: pinctrl@12290000 {
-			compatible = "samsung,exynos5260-pinctrl";
-			reg = <0x12290000 0x1000>;
-			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_2: pinctrl@128B0000 {
-			compatible = "samsung,exynos5260-pinctrl";
-			reg = <0x128B0000 0x1000>;
-			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pmu_system_controller: system-controller@10D50000 {
-			compatible = "samsung,exynos5260-pmu", "syscon";
-			reg = <0x10D50000 0x10000>;
-		};
-
-		uart0: serial@12C00000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C00000 0x100>;
-			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		uart1: serial@12C10000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C10000 0x100>;
-			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		uart2: serial@12C20000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C20000 0x100>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		uart3: serial@12860000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12860000 0x100>;
-			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		mmc_0: mmc@12140000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12140000 0x2000>;
-			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <64>;
-			status = "disabled";
-		};
-
-		mmc_1: mmc@12150000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12150000 0x2000>;
-			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <64>;
-			status = "disabled";
-		};
-
-		mmc_2: mmc@12160000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12160000 0x2000>;
-			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <64>;
-			status = "disabled";
-		};
-	};
-};
-
-#include "exynos5260-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
deleted file mode 100644
index 6cc74d97daae..000000000000
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * SAMSUNG SMDK5410 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5410.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-/ {
-	model = "Samsung SMDK5410 board based on EXYNOS5410";
-	compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC2,115200";
-	};
-
-	fin_pll: xxti {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "fin_pll";
-		#clock-cells = <0>;
-	};
-
-	firmware@02037000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x02037000 0x1000>;
-	};
-
-};
-
-&mmc_0 {
-	status = "okay";
-	num-slots = <1>;
-	cap-mmc-highspeed;
-	broken-cd;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	bus-width = <8>;
-};
-
-&mmc_2 {
-	status = "okay";
-	num-slots = <1>;
-	cap-sd-highspeed;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	bus-width = <4>;
-	disable-wp;
-};
-
-&pinctrl_0 {
-	srom_ctl: srom-ctl {
-		samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
-			       "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	srom_ebi: srom-ebi {
-		samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
-			       "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
-			       "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
-			       "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7",
-			       "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3",
-			       "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-&sromc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&srom_ctl>, <&srom_ebi>;
-
-	ethernet@3,0 {
-		compatible = "smsc,lan9115";
-		reg = <3 0 0x10000>;
-		phy-mode = "mii";
-		interrupt-parent = <&gpx0>;
-		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-		reg-io-width = <2>;
-		smsc,irq-push-pull;
-		smsc,force-internal-phy;
-
-		samsung,srom-page-mode;
-		samsung,srom-timing = <9 12 1 9 1 1>;
-	};
-};
-
-&serial_0 {
-	status = "okay";
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
deleted file mode 100644
index ee1bb9b8b366..000000000000
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ /dev/null
@@ -1,404 +0,0 @@
-/*
- * Samsung's Exynos5420 based Arndale Octa board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5420.dtsi"
-#include "exynos5420-cpus.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/clock/samsung,s2mps11.h>
-
-/ {
-	model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
-	compatible = "insignal,arndale-octa", "samsung,exynos5420", "samsung,exynos5";
-
-	memory@20000000 {
-		device_type = "memory";
-		reg = <0x20000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC3,115200";
-	};
-
-	firmware@02073000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x02073000 0x1000>;
-	};
-
-	fixed-rate-clocks {
-		oscclk {
-			compatible = "samsung,exynos5420-oscclk";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		wakeup {
-			label = "SW-TACT1";
-			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WAKEUP>;
-			wakeup-source;
-		};
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&buck2_reg>;
-};
-
-&cpu4 {
-	cpu-supply = <&buck6_reg>;
-};
-
-&usbdrd_dwc3_1 {
-	dr_mode = "host";
-};
-
-&cci {
-	status = "disabled";
-};
-
-&hdmi {
-	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	vdd_osc-supply = <&ldo7_reg>;
-	vdd_pll-supply = <&ldo6_reg>;
-	vdd-supply = <&ldo6_reg>;
-	ddc = <&i2c_2>;
-	status = "okay";
-};
-
-&hsi2c_4 {
-	status = "okay";
-
-	s2mps11_pmic@66 {
-		compatible = "samsung,s2mps11-pmic";
-		reg = <0x66>;
-
-		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&s2mps11_irq>;
-
-		s2mps11_osc: clocks {
-			#clock-cells = <1>;
-			clock-output-names = "s2mps11_ap",
-					"s2mps11_cp", "s2mps11_bt";
-		};
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "PVDD_ALIVE_1V0";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "PVDD_APIO_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "PVDD_APIO_MMCON_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "PVDD_ADC_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "PVDD_PLL_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "PVDD_ANAIP_1V0";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "PVDD_ANAIP_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "PVDD_ABB_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "PVDD_USB_3V3";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "PVDD_PRE_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "PVDD_USB_1V0";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "PVDD_HSIC_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "PVDD_APIO_MMCOFF_2V8";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "PVDD_PERI_2V8";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "PVDD_PERI_3V3";
-				regulator-min-microvolt = <2200000>;
-				regulator-max-microvolt = <2200000>;
-			};
-
-			ldo18_reg: LDO18 {
-				regulator-name = "PVDD_EMMC_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo19_reg: LDO19 {
-				regulator-name = "PVDD_TFLASH_2V8";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo20_reg: LDO20 {
-				regulator-name = "PVDD_BTWIFI_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo21_reg: LDO21 {
-				regulator-name = "PVDD_CAM1IO_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo23_reg: LDO23 {
-				regulator-name = "PVDD_MIFS_1V1";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			ldo24_reg: LDO24 {
-				regulator-name = "PVDD_CAM1_AVDD_2V8";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo26_reg: LDO26 {
-				regulator-name = "PVDD_CAM0_AF_2V8";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			ldo27_reg: LDO27 {
-				regulator-name = "PVDD_G3DS_1V0";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			ldo28_reg: LDO28 {
-				regulator-name = "PVDD_TSP_3V3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo29_reg: LDO29 {
-				regulator-name = "PVDD_AUDIO_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo31_reg: LDO31 {
-				regulator-name = "PVDD_PERI_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo32_reg: LDO32 {
-				regulator-name = "PVDD_LCD_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo33_reg: LDO33 {
-				regulator-name = "PVDD_CAM0IO_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo35_reg: LDO35 {
-				regulator-name = "PVDD_CAM0_DVDD_1V2";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			ldo38_reg: LDO38 {
-				regulator-name = "PVDD_CAM0_AVDD_2V8";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "PVDD_MIF_1V1";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "PVDD_INT_1V0";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "PVDD_G3D_1V0";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "PVDD_LPDDR3_1V2";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "PVDD_KFC_1V0";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "VIN_LLDO_1V4";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "VIN_MLDO_2V0";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "VIN_HLDO_3V5";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3500000>;
-				regulator-always-on;
-			};
-
-			buck10_reg: BUCK10 {
-				regulator-name = "PVDD_EMMCF_2V8";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-		};
-	};
-};
-
-&i2c_2 {
-	status = "okay";
-};
-
-&mmc_0 {
-	status = "okay";
-	broken-cd;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
-	vmmc-supply = <&ldo10_reg>;
-	bus-width = <8>;
-	cap-mmc-highspeed;
-};
-
-&mmc_2 {
-	status = "okay";
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
-	vmmc-supply = <&ldo19_reg>;
-	vqmmc-supply = <&ldo13_reg>;
-	bus-width = <4>;
-	cap-sd-highspeed;
-};
-
-&pinctrl_0 {
-	s2mps11_irq: s2mps11-irq {
-		samsung,pins = "gpx3-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-};
diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi
deleted file mode 100644
index 5c052d7ff554..000000000000
--- a/arch/arm/boot/dts/exynos5420-cpus.dtsi
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * SAMSUNG EXYNOS5420 SoC cpu device tree source
- *
- * Copyright (c) 2015 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This file provides desired ordering for Exynos5420 and Exynos5800
- * boards: CPU[0123] being the A15.
- *
- * The Exynos5420, 5422 and 5800 actually share the same CPU configuration
- * but particular boards choose different booting order.
- *
- * Exynos5420 and Exynos5800 always boot from Cortex-A15. On Exynos5422
- * booting cluster (big or LITTLE) is chosen by IROM code by reading
- * the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting
- * from the LITTLE: Cortex-A7.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x0>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x1>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x2>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x3>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu4: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-			clocks = <&clock CLK_KFC_CLK>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
-			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <7>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu5: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
-			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <7>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu6: cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x102>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
-			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <7>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu7: cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x103>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
-			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <7>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi
deleted file mode 100644
index c8771c660550..000000000000
--- a/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Device tree sources for Exynos5420 TMU sensor configuration
- *
- * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
- * Copyright (c) 2017 Krzysztof Kozlowski <krzk@kernel.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <8>;
-samsung,tmu_reference_voltage = <16>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <55>;
-samsung,tmu_min_efuse_value = <0>;
-samsung,tmu_max_efuse_value = <100>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <85>;
-samsung,tmu_default_temp_offset = <50>;
-samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
deleted file mode 100644
index 02d2f898efa6..000000000000
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ /dev/null
@@ -1,1506 +0,0 @@
-/*
- * SAMSUNG EXYNOS5420 SoC device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * SAMSUNG EXYNOS54200 SoC device nodes are listed in this file.
- * EXYNOS5420 based board files can include this file and provide
- * values for board specfic bindings.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "exynos54xx.dtsi"
-#include <dt-bindings/clock/exynos5420.h>
-#include <dt-bindings/clock/exynos-audss-clk.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	compatible = "samsung,exynos5420", "samsung,exynos5";
-
-	aliases {
-		mshc0 = &mmc_0;
-		mshc1 = &mmc_1;
-		mshc2 = &mmc_2;
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		pinctrl3 = &pinctrl_3;
-		pinctrl4 = &pinctrl_4;
-		i2c8 = &hsi2c_8;
-		i2c9 = &hsi2c_9;
-		i2c10 = &hsi2c_10;
-		gsc0 = &gsc_0;
-		gsc1 = &gsc_1;
-		spi0 = &spi_0;
-		spi1 = &spi_1;
-		spi2 = &spi_2;
-	};
-
-	/*
-	 * The 'cpus' node is not present here but instead it is provided
-	 * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi.
-	 */
-
-	soc: soc {
-		cluster_a15_opp_table: opp_table0 {
-			compatible = "operating-points-v2";
-			opp-shared;
-			opp-1800000000 {
-				opp-hz = /bits/ 64 <1800000000>;
-				opp-microvolt = <1250000>;
-				clock-latency-ns = <140000>;
-			};
-			opp-1700000000 {
-				opp-hz = /bits/ 64 <1700000000>;
-				opp-microvolt = <1212500>;
-				clock-latency-ns = <140000>;
-			};
-			opp-1600000000 {
-				opp-hz = /bits/ 64 <1600000000>;
-				opp-microvolt = <1175000>;
-				clock-latency-ns = <140000>;
-			};
-			opp-1500000000 {
-				opp-hz = /bits/ 64 <1500000000>;
-				opp-microvolt = <1137500>;
-				clock-latency-ns = <140000>;
-			};
-			opp-1400000000 {
-				opp-hz = /bits/ 64 <1400000000>;
-				opp-microvolt = <1112500>;
-				clock-latency-ns = <140000>;
-			};
-			opp-1300000000 {
-				opp-hz = /bits/ 64 <1300000000>;
-				opp-microvolt = <1062500>;
-				clock-latency-ns = <140000>;
-			};
-			opp-1200000000 {
-				opp-hz = /bits/ 64 <1200000000>;
-				opp-microvolt = <1037500>;
-				clock-latency-ns = <140000>;
-			};
-			opp-1100000000 {
-				opp-hz = /bits/ 64 <1100000000>;
-				opp-microvolt = <1012500>;
-				clock-latency-ns = <140000>;
-			};
-			opp-1000000000 {
-				opp-hz = /bits/ 64 <1000000000>;
-				opp-microvolt = < 987500>;
-				clock-latency-ns = <140000>;
-			};
-			opp-900000000 {
-				opp-hz = /bits/ 64 <900000000>;
-				opp-microvolt = < 962500>;
-				clock-latency-ns = <140000>;
-			};
-			opp-800000000 {
-				opp-hz = /bits/ 64 <800000000>;
-				opp-microvolt = < 937500>;
-				clock-latency-ns = <140000>;
-			};
-			opp-700000000 {
-				opp-hz = /bits/ 64 <700000000>;
-				opp-microvolt = < 912500>;
-				clock-latency-ns = <140000>;
-			};
-		};
-
-		cluster_a7_opp_table: opp_table1 {
-			compatible = "operating-points-v2";
-			opp-shared;
-			opp-1300000000 {
-				opp-hz = /bits/ 64 <1300000000>;
-				opp-microvolt = <1275000>;
-				clock-latency-ns = <140000>;
-			};
-			opp-1200000000 {
-				opp-hz = /bits/ 64 <1200000000>;
-				opp-microvolt = <1212500>;
-				clock-latency-ns = <140000>;
-			};
-			opp-1100000000 {
-				opp-hz = /bits/ 64 <1100000000>;
-				opp-microvolt = <1162500>;
-				clock-latency-ns = <140000>;
-			};
-			opp-1000000000 {
-				opp-hz = /bits/ 64 <1000000000>;
-				opp-microvolt = <1112500>;
-				clock-latency-ns = <140000>;
-			};
-			opp-900000000 {
-				opp-hz = /bits/ 64 <900000000>;
-				opp-microvolt = <1062500>;
-				clock-latency-ns = <140000>;
-			};
-			opp-800000000 {
-				opp-hz = /bits/ 64 <800000000>;
-				opp-microvolt = <1025000>;
-				clock-latency-ns = <140000>;
-			};
-			opp-700000000 {
-				opp-hz = /bits/ 64 <700000000>;
-				opp-microvolt = <975000>;
-				clock-latency-ns = <140000>;
-			};
-			opp-600000000 {
-				opp-hz = /bits/ 64 <600000000>;
-				opp-microvolt = <937500>;
-				clock-latency-ns = <140000>;
-			};
-		};
-
-		cci: cci@10d20000 {
-			compatible = "arm,cci-400";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x10d20000 0x1000>;
-			ranges = <0x0 0x10d20000 0x6000>;
-
-			cci_control0: slave-if@4000 {
-				compatible = "arm,cci-400-ctrl-if";
-				interface-type = "ace";
-				reg = <0x4000 0x1000>;
-			};
-			cci_control1: slave-if@5000 {
-				compatible = "arm,cci-400-ctrl-if";
-				interface-type = "ace";
-				reg = <0x5000 0x1000>;
-			};
-		};
-
-		clock: clock-controller@10010000 {
-			compatible = "samsung,exynos5420-clock";
-			reg = <0x10010000 0x30000>;
-			#clock-cells = <1>;
-		};
-
-		clock_audss: audss-clock-controller@3810000 {
-			compatible = "samsung,exynos5420-audss-clock";
-			reg = <0x03810000 0x0C>;
-			#clock-cells = <1>;
-			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
-				 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
-			clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
-		};
-
-		mfc: codec@11000000 {
-			compatible = "samsung,mfc-v7";
-			reg = <0x11000000 0x10000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_MFC>;
-			clock-names = "mfc";
-			power-domains = <&mfc_pd>;
-			iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
-			iommu-names = "left", "right";
-		};
-
-		mmc_0: mmc@12200000 {
-			compatible = "samsung,exynos5420-dw-mshc-smu";
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x12200000 0x2000>;
-			clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x40>;
-			status = "disabled";
-		};
-
-		mmc_1: mmc@12210000 {
-			compatible = "samsung,exynos5420-dw-mshc-smu";
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x12210000 0x2000>;
-			clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x40>;
-			status = "disabled";
-		};
-
-		mmc_2: mmc@12220000 {
-			compatible = "samsung,exynos5420-dw-mshc";
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x12220000 0x1000>;
-			clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x40>;
-			status = "disabled";
-		};
-
-		nocp_mem0_0: nocp@10CA1000 {
-			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10CA1000 0x200>;
-			status = "disabled";
-		};
-
-		nocp_mem0_1: nocp@10CA1400 {
-			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10CA1400 0x200>;
-			status = "disabled";
-		};
-
-		nocp_mem1_0: nocp@10CA1800 {
-			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10CA1800 0x200>;
-			status = "disabled";
-		};
-
-		nocp_mem1_1: nocp@10CA1C00 {
-			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10CA1C00 0x200>;
-			status = "disabled";
-		};
-
-		nocp_g3d_0: nocp@11A51000 {
-			compatible = "samsung,exynos5420-nocp";
-			reg = <0x11A51000 0x200>;
-			status = "disabled";
-		};
-
-		nocp_g3d_1: nocp@11A51400 {
-			compatible = "samsung,exynos5420-nocp";
-			reg = <0x11A51400 0x200>;
-			status = "disabled";
-		};
-
-		gsc_pd: power-domain@10044000 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10044000 0x20>;
-			#power-domain-cells = <0>;
-			label = "GSC";
-			clocks = <&clock CLK_FIN_PLL>,
-				 <&clock CLK_MOUT_USER_ACLK300_GSCL>,
-				 <&clock CLK_GSCL0>, <&clock CLK_GSCL1>;
-			clock-names = "oscclk", "clk0", "asb0", "asb1";
-		};
-
-		isp_pd: power-domain@10044020 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10044020 0x20>;
-			#power-domain-cells = <0>;
-			label = "ISP";
-		};
-
-		mfc_pd: power-domain@10044060 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10044060 0x20>;
-			clocks = <&clock CLK_FIN_PLL>,
-				 <&clock CLK_MOUT_USER_ACLK333>,
-				 <&clock CLK_ACLK333>;
-			clock-names = "oscclk", "clk0","asb0";
-			#power-domain-cells = <0>;
-			label = "MFC";
-		};
-
-		msc_pd: power-domain@10044120 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10044120 0x20>;
-			#power-domain-cells = <0>;
-			label = "MSC";
-		};
-
-		disp_pd: power-domain@100440C0 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x100440C0 0x20>;
-			#power-domain-cells = <0>;
-			label = "DISP";
-			clocks = <&clock CLK_FIN_PLL>,
-				 <&clock CLK_MOUT_USER_ACLK200_DISP1>,
-				 <&clock CLK_MOUT_USER_ACLK300_DISP1>,
-				 <&clock CLK_MOUT_USER_ACLK400_DISP1>,
-				 <&clock CLK_FIMD1>, <&clock CLK_MIXER>;
-			clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1";
-		};
-
-		pinctrl_0: pinctrl@13400000 {
-			compatible = "samsung,exynos5420-pinctrl";
-			reg = <0x13400000 0x1000>;
-			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-
-			wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		pinctrl_1: pinctrl@13410000 {
-			compatible = "samsung,exynos5420-pinctrl";
-			reg = <0x13410000 0x1000>;
-			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_2: pinctrl@14000000 {
-			compatible = "samsung,exynos5420-pinctrl";
-			reg = <0x14000000 0x1000>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_3: pinctrl@14010000 {
-			compatible = "samsung,exynos5420-pinctrl";
-			reg = <0x14010000 0x1000>;
-			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_4: pinctrl@03860000 {
-			compatible = "samsung,exynos5420-pinctrl";
-			reg = <0x03860000 0x1000>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		amba {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			interrupt-parent = <&gic>;
-			ranges;
-
-			adma: adma@03880000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x03880000 0x1000>;
-				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock_audss EXYNOS_ADMA>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <6>;
-				#dma-requests = <16>;
-			};
-
-			pdma0: pdma@121A0000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x121A0000 0x1000>;
-				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			pdma1: pdma@121B0000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x121B0000 0x1000>;
-				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			mdma0: mdma@10800000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x10800000 0x1000>;
-				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_MDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <1>;
-			};
-
-			mdma1: mdma@11C10000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x11C10000 0x1000>;
-				interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_MDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <1>;
-				/*
-				 * MDMA1 can support both secure and non-secure
-				 * AXI transactions. When this is enabled in
-				 * the kernel for boards that run in secure
-				 * mode, we are getting imprecise external
-				 * aborts causing the kernel to oops.
-				 */
-				status = "disabled";
-			};
-		};
-
-		i2s0: i2s@03830000 {
-			compatible = "samsung,exynos5420-i2s";
-			reg = <0x03830000 0x100>;
-			dmas = <&adma 0
-				&adma 2
-				&adma 1>;
-			dma-names = "tx", "rx", "tx-sec";
-			clocks = <&clock_audss EXYNOS_I2S_BUS>,
-				<&clock_audss EXYNOS_I2S_BUS>,
-				<&clock_audss EXYNOS_SCLK_I2S>;
-			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-			#clock-cells = <1>;
-			clock-output-names = "i2s_cdclk0";
-			#sound-dai-cells = <1>;
-			samsung,idma-addr = <0x03000000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2s0_bus>;
-			status = "disabled";
-		};
-
-		i2s1: i2s@12D60000 {
-			compatible = "samsung,exynos5420-i2s";
-			reg = <0x12D60000 0x100>;
-			dmas = <&pdma1 12
-				&pdma1 11>;
-			dma-names = "tx", "rx";
-			clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
-			clock-names = "iis", "i2s_opclk0";
-			#clock-cells = <1>;
-			clock-output-names = "i2s_cdclk1";
-			#sound-dai-cells = <1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2s1_bus>;
-			status = "disabled";
-		};
-
-		i2s2: i2s@12D70000 {
-			compatible = "samsung,exynos5420-i2s";
-			reg = <0x12D70000 0x100>;
-			dmas = <&pdma0 12
-				&pdma0 11>;
-			dma-names = "tx", "rx";
-			clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
-			clock-names = "iis", "i2s_opclk0";
-			#clock-cells = <1>;
-			clock-output-names = "i2s_cdclk2";
-			#sound-dai-cells = <1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2s2_bus>;
-			status = "disabled";
-		};
-
-		spi_0: spi@12d20000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x12d20000 0x100>;
-			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma0 5
-				&pdma0 4>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi0_bus>;
-			clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
-			clock-names = "spi", "spi_busclk0";
-			status = "disabled";
-		};
-
-		spi_1: spi@12d30000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x12d30000 0x100>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma1 5
-				&pdma1 4>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_bus>;
-			clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
-			clock-names = "spi", "spi_busclk0";
-			status = "disabled";
-		};
-
-		spi_2: spi@12d40000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x12d40000 0x100>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma0 7
-				&pdma0 6>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi2_bus>;
-			clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
-			clock-names = "spi", "spi_busclk0";
-			status = "disabled";
-		};
-
-		dp_phy: dp-video-phy {
-			compatible = "samsung,exynos5420-dp-video-phy";
-			samsung,pmu-syscon = <&pmu_system_controller>;
-			#phy-cells = <0>;
-		};
-
-		mipi_phy: mipi-video-phy {
-			compatible = "samsung,s5pv210-mipi-video-phy";
-			syscon = <&pmu_system_controller>;
-			#phy-cells = <1>;
-		};
-
-		dsi@14500000 {
-			compatible = "samsung,exynos5410-mipi-dsi";
-			reg = <0x14500000 0x10000>;
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&mipi_phy 1>;
-			phy-names = "dsim";
-			clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
-			clock-names = "bus_clk", "pll_clk";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		adc: adc@12D10000 {
-			compatible = "samsung,exynos-adc-v2";
-			reg = <0x12D10000 0x100>;
-			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_TSADC>;
-			clock-names = "adc";
-			#io-channel-cells = <1>;
-			io-channel-ranges;
-			samsung,syscon-phandle = <&pmu_system_controller>;
-			status = "disabled";
-		};
-
-		hsi2c_8: i2c@12E00000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12E00000 0x1000>;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c8_hs_bus>;
-			clocks = <&clock CLK_USI4>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hsi2c_9: i2c@12E10000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12E10000 0x1000>;
-			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c9_hs_bus>;
-			clocks = <&clock CLK_USI5>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hsi2c_10: i2c@12E20000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12E20000 0x1000>;
-			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c10_hs_bus>;
-			clocks = <&clock CLK_USI6>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hdmi: hdmi@14530000 {
-			compatible = "samsung,exynos5420-hdmi";
-			reg = <0x14530000 0x70000>;
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
-				 <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
-				 <&clock CLK_MOUT_HDMI>;
-			clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
-				"sclk_hdmiphy", "mout_hdmi";
-			phy = <&hdmiphy>;
-			samsung,syscon-phandle = <&pmu_system_controller>;
-			status = "disabled";
-			power-domains = <&disp_pd>;
-		};
-
-		hdmiphy: hdmiphy@145D0000 {
-			reg = <0x145D0000 0x20>;
-		};
-
-		hdmicec: cec@101B0000 {
-			compatible = "samsung,s5p-cec";
-			reg = <0x101B0000 0x200>;
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_HDMI_CEC>;
-			clock-names = "hdmicec";
-			samsung,syscon-phandle = <&pmu_system_controller>;
-			hdmi-phandle = <&hdmi>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&hdmi_cec>;
-			status = "disabled";
-		};
-
-		mixer: mixer@14450000 {
-			compatible = "samsung,exynos5420-mixer";
-			reg = <0x14450000 0x10000>;
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-				 <&clock CLK_SCLK_HDMI>;
-			clock-names = "mixer", "hdmi", "sclk_hdmi";
-			power-domains = <&disp_pd>;
-			iommus = <&sysmmu_tv>;
-		};
-
-		rotator: rotator@11C00000 {
-			compatible = "samsung,exynos5250-rotator";
-			reg = <0x11C00000 0x64>;
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_ROTATOR>;
-			clock-names = "rotator";
-			iommus = <&sysmmu_rotator>;
-		};
-
-		gsc_0: video-scaler@13e00000 {
-			compatible = "samsung,exynos5-gsc";
-			reg = <0x13e00000 0x1000>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_GSCL0>;
-			clock-names = "gscl";
-			power-domains = <&gsc_pd>;
-			iommus = <&sysmmu_gscl0>;
-		};
-
-		gsc_1: video-scaler@13e10000 {
-			compatible = "samsung,exynos5-gsc";
-			reg = <0x13e10000 0x1000>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_GSCL1>;
-			clock-names = "gscl";
-			power-domains = <&gsc_pd>;
-			iommus = <&sysmmu_gscl1>;
-		};
-
-		jpeg_0: jpeg@11F50000 {
-			compatible = "samsung,exynos5420-jpeg";
-			reg = <0x11F50000 0x1000>;
-			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "jpeg";
-			clocks = <&clock CLK_JPEG>;
-			iommus = <&sysmmu_jpeg0>;
-		};
-
-		jpeg_1: jpeg@11F60000 {
-			compatible = "samsung,exynos5420-jpeg";
-			reg = <0x11F60000 0x1000>;
-			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "jpeg";
-			clocks = <&clock CLK_JPEG2>;
-			iommus = <&sysmmu_jpeg1>;
-		};
-
-		pmu_system_controller: system-controller@10040000 {
-			compatible = "samsung,exynos5420-pmu", "syscon";
-			reg = <0x10040000 0x5000>;
-			clock-names = "clkout16";
-			clocks = <&clock CLK_FIN_PLL>;
-			#clock-cells = <1>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupt-parent = <&gic>;
-		};
-
-		tmu_cpu0: tmu@10060000 {
-			compatible = "samsung,exynos5420-tmu";
-			reg = <0x10060000 0x100>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_TMU>;
-			clock-names = "tmu_apbif";
-			#include "exynos5420-tmu-sensor-conf.dtsi"
-		};
-
-		tmu_cpu1: tmu@10064000 {
-			compatible = "samsung,exynos5420-tmu";
-			reg = <0x10064000 0x100>;
-			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_TMU>;
-			clock-names = "tmu_apbif";
-			#include "exynos5420-tmu-sensor-conf.dtsi"
-		};
-
-		tmu_cpu2: tmu@10068000 {
-			compatible = "samsung,exynos5420-tmu-ext-triminfo";
-			reg = <0x10068000 0x100>, <0x1006c000 0x4>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
-			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-			#include "exynos5420-tmu-sensor-conf.dtsi"
-		};
-
-		tmu_cpu3: tmu@1006c000 {
-			compatible = "samsung,exynos5420-tmu-ext-triminfo";
-			reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
-			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
-			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-			#include "exynos5420-tmu-sensor-conf.dtsi"
-		};
-
-		tmu_gpu: tmu@100a0000 {
-			compatible = "samsung,exynos5420-tmu-ext-triminfo";
-			reg = <0x100a0000 0x100>, <0x10068000 0x4>;
-			interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
-			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-			#include "exynos5420-tmu-sensor-conf.dtsi"
-		};
-
-		sysmmu_g2dr: sysmmu@0x10A60000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10A60000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <24 5>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_g2dw: sysmmu@0x10A70000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10A70000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <22 2>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_tv: sysmmu@0x14650000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x14650000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <7 4>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>;
-			power-domains = <&disp_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_gscl0: sysmmu@0x13E80000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13E80000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <2 0>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
-			power-domains = <&gsc_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_gscl1: sysmmu@0x13E90000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13E90000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <2 2>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
-			power-domains = <&gsc_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_scaler0r: sysmmu@0x12880000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12880000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <22 4>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_scaler1r: sysmmu@0x12890000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12890000 0x1000>;
-			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_scaler2r: sysmmu@0x128A0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128A0000 0x1000>;
-			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_scaler0w: sysmmu@0x128C0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128C0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <27 2>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_scaler1w: sysmmu@0x128D0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128D0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <22 6>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_scaler2w: sysmmu@0x128E0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128E0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <19 6>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_rotator: sysmmu@0x11D40000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11D40000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <4 0>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_jpeg0: sysmmu@0x11F10000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11F10000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <4 2>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_jpeg1: sysmmu@0x11F20000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11F20000 0x1000>;
-			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_mfc_l: sysmmu@0x11200000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11200000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <6 2>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
-			power-domains = <&mfc_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_mfc_r: sysmmu@0x11210000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11210000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <8 5>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
-			power-domains = <&mfc_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimd1_0: sysmmu@0x14640000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x14640000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <3 2>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
-			power-domains = <&disp_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimd1_1: sysmmu@0x14680000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x14680000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <3 0>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>;
-			power-domains = <&disp_pd>;
-			#iommu-cells = <0>;
-		};
-
-		bus_wcore: bus_wcore {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_wcore_opp_table>;
-			status = "disabled";
-		};
-
-		bus_noc: bus_noc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK100_NOC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_noc_opp_table>;
-			status = "disabled";
-		};
-
-		bus_fsys_apb: bus_fsys_apb {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_fsys_apb_opp_table>;
-			status = "disabled";
-		};
-
-		bus_fsys: bus_fsys {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_fsys_apb_opp_table>;
-			status = "disabled";
-		};
-
-		bus_fsys2: bus_fsys2 {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_fsys2_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mfc: bus_mfc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK333>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_mfc_opp_table>;
-			status = "disabled";
-		};
-
-		bus_gen: bus_gen {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK266>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_gen_opp_table>;
-			status = "disabled";
-		};
-
-		bus_peri: bus_peri {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK66>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_peri_opp_table>;
-			status = "disabled";
-		};
-
-		bus_g2d: bus_g2d {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK333_G2D>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_g2d_opp_table>;
-			status = "disabled";
-		};
-
-		bus_g2d_acp: bus_g2d_acp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK266_G2D>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_g2d_acp_opp_table>;
-			status = "disabled";
-		};
-
-		bus_jpeg: bus_jpeg {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_jpeg_opp_table>;
-			status = "disabled";
-		};
-
-		bus_jpeg_apb: bus_jpeg_apb {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK166>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_jpeg_apb_opp_table>;
-			status = "disabled";
-		};
-
-		bus_disp1_fimd: bus_disp1_fimd {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_disp1_fimd_opp_table>;
-			status = "disabled";
-		};
-
-		bus_disp1: bus_disp1 {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_disp1_opp_table>;
-			status = "disabled";
-		};
-
-		bus_gscl_scaler: bus_gscl_scaler {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_gscl_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mscl: bus_mscl {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_mscl_opp_table>;
-			status = "disabled";
-		};
-
-		bus_wcore_opp_table: opp_table2 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <84000000>;
-				opp-microvolt = <925000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <111000000>;
-				opp-microvolt = <950000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <222000000>;
-				opp-microvolt = <950000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <333000000>;
-				opp-microvolt = <950000>;
-			};
-			opp04 {
-				opp-hz = /bits/ 64 <400000000>;
-				opp-microvolt = <987500>;
-			};
-		};
-
-		bus_noc_opp_table: opp_table3 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <67000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <75000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <86000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-		};
-
-		bus_fsys_apb_opp_table: opp_table4 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp00 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-		};
-
-		bus_fsys2_opp_table: opp_table5 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <75000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <150000000>;
-			};
-		};
-
-		bus_mfc_opp_table: opp_table6 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <96000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <111000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <167000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <222000000>;
-			};
-			opp04 {
-				opp-hz = /bits/ 64 <333000000>;
-			};
-		};
-
-		bus_gen_opp_table: opp_table7 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <89000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <133000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <178000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <267000000>;
-			};
-		};
-
-		bus_peri_opp_table: opp_table8 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <67000000>;
-			};
-		};
-
-		bus_g2d_opp_table: opp_table9 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <84000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <167000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <222000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <300000000>;
-			};
-			opp04 {
-				opp-hz = /bits/ 64 <333000000>;
-			};
-		};
-
-		bus_g2d_acp_opp_table: opp_table10 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <67000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <133000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <178000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <267000000>;
-			};
-		};
-
-		bus_jpeg_opp_table: opp_table11 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <75000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <150000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <300000000>;
-			};
-		};
-
-		bus_jpeg_apb_opp_table: opp_table12 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <84000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <111000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <167000000>;
-			};
-		};
-
-		bus_disp1_fimd_opp_table: opp_table13 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <120000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-		};
-
-		bus_disp1_opp_table: opp_table14 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <120000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <300000000>;
-			};
-		};
-
-		bus_gscl_opp_table: opp_table15 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <150000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <300000000>;
-			};
-		};
-
-		bus_mscl_opp_table: opp_table16 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <84000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <167000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <222000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <333000000>;
-			};
-			opp04 {
-				opp-hz = /bits/ 64 <400000000>;
-			};
-		};
-	};
-
-	thermal-zones {
-		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0>;
-			#include "exynos5420-trip-points.dtsi"
-		};
-		cpu1_thermal: cpu1-thermal {
-		       thermal-sensors = <&tmu_cpu1>;
-		       #include "exynos5420-trip-points.dtsi"
-		};
-		cpu2_thermal: cpu2-thermal {
-		       thermal-sensors = <&tmu_cpu2>;
-		       #include "exynos5420-trip-points.dtsi"
-		};
-		cpu3_thermal: cpu3-thermal {
-		       thermal-sensors = <&tmu_cpu3>;
-		       #include "exynos5420-trip-points.dtsi"
-		};
-		gpu_thermal: gpu-thermal {
-		       thermal-sensors = <&tmu_gpu>;
-		       #include "exynos5420-trip-points.dtsi"
-		};
-	};
-};
-
-&dp {
-	clocks = <&clock CLK_DP1>;
-	clock-names = "dp";
-	phys = <&dp_phy>;
-	phy-names = "dp";
-	power-domains = <&disp_pd>;
-};
-
-&fimd {
-	compatible = "samsung,exynos5420-fimd";
-	clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
-	clock-names = "sclk_fimd", "fimd";
-	power-domains = <&disp_pd>;
-	iommus = <&sysmmu_fimd1_0>, <&sysmmu_fimd1_1>;
-	iommu-names = "m0", "m1";
-};
-
-&i2c_0 {
-	clocks = <&clock CLK_I2C0>;
-	clock-names = "i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_bus>;
-};
-
-&i2c_1 {
-	clocks = <&clock CLK_I2C1>;
-	clock-names = "i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_bus>;
-};
-
-&i2c_2 {
-	clocks = <&clock CLK_I2C2>;
-	clock-names = "i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_bus>;
-};
-
-&i2c_3 {
-	clocks = <&clock CLK_I2C3>;
-	clock-names = "i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_bus>;
-};
-
-&hsi2c_4 {
-	clocks = <&clock CLK_USI0>;
-	clock-names = "hsi2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_hs_bus>;
-};
-
-&hsi2c_5 {
-	clocks = <&clock CLK_USI1>;
-	clock-names = "hsi2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c5_hs_bus>;
-};
-
-&hsi2c_6 {
-	clocks = <&clock CLK_USI2>;
-	clock-names = "hsi2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c6_hs_bus>;
-};
-
-&hsi2c_7 {
-	clocks = <&clock CLK_USI3>;
-	clock-names = "hsi2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c7_hs_bus>;
-};
-
-&mct {
-	clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-	clock-names = "fin_pll", "mct";
-};
-
-&pwm {
-	clocks = <&clock CLK_PWM>;
-	clock-names = "timers";
-};
-
-&rtc {
-	clocks = <&clock CLK_RTC>;
-	clock-names = "rtc";
-	interrupt-parent = <&pmu_system_controller>;
-	status = "disabled";
-};
-
-&serial_0 {
-	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-	clock-names = "uart", "clk_uart_baud0";
-	dmas = <&pdma0 13>, <&pdma0 14>;
-	dma-names = "rx", "tx";
-};
-
-&serial_1 {
-	clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-	clock-names = "uart", "clk_uart_baud0";
-	dmas = <&pdma1 15>, <&pdma1 16>;
-	dma-names = "rx", "tx";
-};
-
-&serial_2 {
-	clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-	clock-names = "uart", "clk_uart_baud0";
-	dmas = <&pdma0 15>, <&pdma0 16>;
-	dma-names = "rx", "tx";
-};
-
-&serial_3 {
-	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
-	clock-names = "uart", "clk_uart_baud0";
-	dmas = <&pdma1 17>, <&pdma1 18>;
-	dma-names = "rx", "tx";
-};
-
-&sss {
-	clocks = <&clock CLK_SSS>;
-	clock-names = "secss";
-};
-
-&usbdrd3_0 {
-	clocks = <&clock CLK_USBD300>;
-	clock-names = "usbdrd30";
-};
-
-&usbdrd_phy0 {
-	clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
-	clock-names = "phy", "ref";
-	samsung,pmu-syscon = <&pmu_system_controller>;
-};
-
-&usbdrd3_1 {
-	clocks = <&clock CLK_USBD301>;
-	clock-names = "usbdrd30";
-};
-
-&usbdrd_dwc3_1 {
-	interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usbdrd_phy1 {
-	clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
-	clock-names = "phy", "ref";
-	samsung,pmu-syscon = <&pmu_system_controller>;
-};
-
-&usbhost1 {
-	clocks = <&clock CLK_USBH20>;
-	clock-names = "usbhost";
-};
-
-&usbhost2 {
-	clocks = <&clock CLK_USBH20>;
-	clock-names = "usbhost";
-};
-
-&usb2_phy {
-	clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
-	clock-names = "phy", "ref";
-	samsung,sysreg-phandle = <&sysreg_system_controller>;
-	samsung,pmureg-phandle = <&pmu_system_controller>;
-};
-
-&watchdog {
-	clocks = <&clock CLK_WDT>;
-	clock-names = "watchdog";
-	samsung,syscon-phandle = <&pmu_system_controller>;
-};
-
-#include "exynos5420-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi
deleted file mode 100644
index bf3c6f1ec4ee..000000000000
--- a/arch/arm/boot/dts/exynos5422-cpus.dtsi
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * SAMSUNG EXYNOS5422 SoC cpu device tree source
- *
- * Copyright (c) 2015 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This file provides desired ordering for Exynos5422: CPU[0123] being the A7.
- *
- * The Exynos5420, 5422 and 5800 actually share the same CPU configuration
- * but particular boards choose different booting order.
- *
- * Exynos5420 and Exynos5800 always boot from Cortex-A15. On Exynos5422
- * booting cluster (big or LITTLE) is chosen by IROM code by reading
- * the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting
- * from the LITTLE: Cortex-A7.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-			clocks = <&clock CLK_KFC_CLK>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
-			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu1: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
-			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu2: cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x102>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
-			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu3: cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x103>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
-			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu4: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			clocks = <&clock CLK_ARM_CLK>;
-			reg = <0x0>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <15>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu5: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x1>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <15>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu6: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x2>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <15>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu7: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x3>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <15>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
deleted file mode 100644
index c0b85981c6bf..000000000000
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Hardkernel Odroid XU3 Audio Codec device tree source
- *
- * Copyright (c) 2015 Krzysztof Kozlowski
- * Copyright (c) 2014 Collabora Ltd.
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/ {
-	sound: sound {
-		compatible = "simple-audio-card";
-
-		simple-audio-card,name = "Odroid-XU3";
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack",
-			"Speakers", "Speakers";
-		simple-audio-card,routing =
-			"Headphone Jack", "HPL",
-			"Headphone Jack", "HPR",
-			"Headphone Jack", "MICBIAS",
-			"IN1", "Headphone Jack",
-			"Speakers", "SPKL",
-			"Speakers", "SPKR";
-
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&link0_codec>;
-		simple-audio-card,frame-master = <&link0_codec>;
-
-		simple-audio-card,cpu {
-			sound-dai = <&i2s0 0>;
-			system-clock-frequency = <19200000>;
-		};
-
-		link0_codec: simple-audio-card,codec {
-			sound-dai = <&max98090>;
-			clocks = <&i2s0 CLK_I2S_CDCLK>;
-		};
-	};
-};
-
-&hsi2c_5 {
-	status = "okay";
-	max98090: max98090@10 {
-		compatible = "maxim,max98090";
-		reg = <0x10>;
-		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
-		clocks = <&i2s0 CLK_I2S_CDCLK>;
-		clock-names = "mclk";
-		#sound-dai-cells = <0>;
-	};
-};
-
-&i2s0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
deleted file mode 100644
index f92f95741207..000000000000
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ /dev/null
@@ -1,627 +0,0 @@
-/*
- * Hardkernel Odroid XU3 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2014 Collabora Ltd.
- * Copyright (c) 2015 Lukasz Majewski <l.majewski@samsung.com>
- *                    Anand Moon <linux.amoon@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <dt-bindings/clock/samsung,s2mps11.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/sound/samsung-i2s.h>
-#include "exynos5800.dtsi"
-#include "exynos5422-cpus.dtsi"
-
-/ {
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x7EA00000>;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	firmware@02073000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x02073000 0x1000>;
-	};
-
-	fixed-rate-clocks {
-		oscclk {
-			compatible = "samsung,exynos5420-oscclk";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	emmc_pwrseq: pwrseq {
-		pinctrl-0 = <&emmc_nrst_pin>;
-		pinctrl-names = "default";
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
-	};
-
-	fan0: pwm-fan {
-		compatible = "pwm-fan";
-		pwms = <&pwm 0 20972 0>;
-		cooling-min-state = <0>;
-		cooling-max-state = <3>;
-		#cooling-cells = <2>;
-		cooling-levels = <0 130 170 230>;
-	};
-
-	thermal-zones {
-		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0 0>;
-			polling-delay-passive = <250>;
-			polling-delay = <0>;
-			trips {
-				cpu_alert0: cpu-alert-0 {
-					temperature = <50000>; /* millicelsius */
-					hysteresis = <5000>; /* millicelsius */
-					type = "active";
-				};
-				cpu_alert1: cpu-alert-1 {
-					temperature = <60000>; /* millicelsius */
-					hysteresis = <5000>; /* millicelsius */
-					type = "active";
-				};
-				cpu_alert2: cpu-alert-2 {
-					temperature = <70000>; /* millicelsius */
-					hysteresis = <5000>; /* millicelsius */
-					type = "active";
-				};
-				cpu_crit0: cpu-crit-0 {
-					temperature = <120000>; /* millicelsius */
-					hysteresis = <0>; /* millicelsius */
-					type = "critical";
-				};
-				/*
-				 * Exynos542x supports only 4 trip-points
-				 * so for these polling mode is required.
-				 * Start polling at temperature level of last
-				 * interrupt-driven trip: cpu_alert2
-				 */
-				cpu_alert3: cpu-alert-3 {
-					temperature = <70000>; /* millicelsius */
-					hysteresis = <10000>; /* millicelsius */
-					type = "passive";
-				};
-				cpu_alert4: cpu-alert-4 {
-					temperature = <85000>; /* millicelsius */
-					hysteresis = <10000>; /* millicelsius */
-					type = "passive";
-				};
-
-			};
-			cooling-maps {
-				map0 {
-					trip = <&cpu_alert0>;
-					cooling-device = <&fan0 0 1>;
-				};
-				map1 {
-					trip = <&cpu_alert1>;
-					cooling-device = <&fan0 1 2>;
-				};
-				map2 {
-					trip = <&cpu_alert2>;
-					cooling-device = <&fan0 2 3>;
-				};
-				/*
-				 * When reaching cpu_alert3, reduce CPU
-				 * by 2 steps. On Exynos5422/5800 that would
-				 * be: 1600 MHz and 1100 MHz.
-				 */
-				map3 {
-					trip = <&cpu_alert3>;
-					cooling-device = <&cpu0 0 2>;
-				};
-				map4 {
-					trip = <&cpu_alert3>;
-					cooling-device = <&cpu4 0 2>;
-				};
-
-				/*
-				 * When reaching cpu_alert4, reduce CPU
-				 * further, down to 600 MHz (11 steps for big,
-				 * 7 steps for LITTLE).
-				 */
-				map5 {
-					trip = <&cpu_alert4>;
-					cooling-device = <&cpu0 3 7>;
-				};
-				map6 {
-					trip = <&cpu_alert4>;
-					cooling-device = <&cpu4 3 11>;
-				};
-			};
-		};
-	};
-};
-
-&adc {
-	vdd-supply = <&ldo4_reg>;
-	status = "okay";
-};
-
-&bus_wcore {
-	devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>,
-			<&nocp_mem1_0>, <&nocp_mem1_1>;
-	vdd-supply = <&buck3_reg>;
-	exynos,saturation-ratio = <100>;
-	status = "okay";
-};
-
-&bus_noc {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_fsys_apb {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_fsys {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_fsys2 {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_mfc {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_gen {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_peri {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_g2d {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_g2d_acp {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_jpeg {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_jpeg_apb {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_disp1_fimd {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_disp1 {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_gscl_scaler {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_mscl {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&clock_audss {
-	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
-			<&clock_audss EXYNOS_MOUT_I2S>,
-			<&clock_audss EXYNOS_DOUT_AUD_BUS>;
-	assigned-clock-parents = <&clock CLK_FIN_PLL>,
-			<&clock_audss EXYNOS_MOUT_AUDSS>;
-	assigned-clock-rates = <0>,
-			<0>,
-			<19200000>;
-};
-
-&cpu0 {
-	cpu-supply = <&buck6_reg>;
-};
-
-&cpu4 {
-	cpu-supply = <&buck2_reg>;
-};
-
-&hdmi {
-	status = "okay";
-	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd_irq>;
-
-	vdd_osc-supply = <&ldo7_reg>;
-	vdd_pll-supply = <&ldo6_reg>;
-	vdd-supply = <&ldo6_reg>;
-};
-
-&hdmicec {
-	status = "okay";
-};
-
-&hsi2c_4 {
-	status = "okay";
-
-	s2mps11_pmic@66 {
-		compatible = "samsung,s2mps11-pmic";
-		reg = <0x66>;
-		samsung,s2mps11-acokb-ground;
-
-		interrupt-parent = <&gpx0>;
-		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&s2mps11_irq>;
-
-		s2mps11_osc: clocks {
-			#clock-cells = <1>;
-			clock-output-names = "s2mps11_ap",
-					"s2mps11_cp", "s2mps11_bt";
-		};
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "vdd_ldo1";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "vddq_mmc0";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "vdd_adc";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "vdd_ldo5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "vdd_ldo6";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "vdd_ldo7";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "vdd_ldo8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "vdd_ldo9";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "vdd_ldo10";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "vdd_ldo11";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "vdd_ldo12";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "vddq_mmc2";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "vdd_ldo15";
-				regulator-min-microvolt = <3100000>;
-				regulator-max-microvolt = <3100000>;
-				regulator-always-on;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "vdd_ldo16";
-				regulator-min-microvolt = <2200000>;
-				regulator-max-microvolt = <2200000>;
-				regulator-always-on;
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "tsp_avdd";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			ldo18_reg: LDO18 {
-				regulator-name = "vdd_emmc_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo19_reg: LDO19 {
-				regulator-name = "vdd_sd";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo24_reg: LDO24 {
-				regulator-name = "tsp_io";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			ldo26_reg: LDO26 {
-				regulator-name = "vdd_ldo26";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "vdd_mem";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "vdd_kfc";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "vdd_1.0v_ldo";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "vdd_1.8v_ldo";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "vdd_2.8v_ldo";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3750000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck10_reg: BUCK10 {
-				regulator-name = "vdd_vmem";
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <2850000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-	};
-};
-
-&i2c_2 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-	status = "okay";
-
-	hdmiddc@50 {
-		compatible = "samsung,exynos4210-hdmiddc";
-		reg = <0x50>;
-	};
-};
-
-&mmc_0 {
-	status = "okay";
-	mmc-pwrseq = <&emmc_pwrseq>;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	samsung,dw-mshc-hs400-timing = <0 2>;
-	samsung,read-strobe-delay = <90>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
-	vmmc-supply = <&ldo18_reg>;
-	vqmmc-supply = <&ldo3_reg>;
-};
-
-&mmc_2 {
-	status = "okay";
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
-	bus-width = <4>;
-	cap-sd-highspeed;
-	vmmc-supply = <&ldo19_reg>;
-	vqmmc-supply = <&ldo13_reg>;
-};
-
-&nocp_mem0_0 {
-	status = "okay";
-};
-
-&nocp_mem0_1 {
-	status = "okay";
-};
-
-&nocp_mem1_0 {
-	status = "okay";
-};
-
-&nocp_mem1_1 {
-	status = "okay";
-};
-
-&pinctrl_0 {
-	hdmi_hpd_irq: hdmi-hpd-irq {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	s2mps11_irq: s2mps11-irq {
-		samsung,pins = "gpx0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_1 {
-	emmc_nrst_pin: emmc-nrst {
-		samsung,pins = "gpd1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-&tmu_cpu0 {
-	vtmu-supply = <&ldo7_reg>;
-};
-
-&tmu_cpu1 {
-	vtmu-supply = <&ldo7_reg>;
-};
-
-&tmu_cpu2 {
-	vtmu-supply = <&ldo7_reg>;
-};
-
-&tmu_cpu3 {
-	vtmu-supply = <&ldo7_reg>;
-};
-
-&tmu_gpu {
-	vtmu-supply = <&ldo7_reg>;
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&usbdrd_dwc3_0 {
-	dr_mode = "host";
-};
-
-/* usbdrd_dwc3_1 mode customized in each board */
-
-&usbdrd3_0 {
-	vdd33-supply = <&ldo9_reg>;
-	vdd10-supply = <&ldo11_reg>;
-};
-
-&usbdrd3_1 {
-	vdd33-supply = <&ldo9_reg>;
-	vdd10-supply = <&ldo11_reg>;
-};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
deleted file mode 100644
index 03fa88c45426..000000000000
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Hardkernel Odroid XU3-Lite board device tree source
- *
- * Copyright (c) 2015 Krzysztof Kozlowski
- * Copyright (c) 2014 Collabora Ltd.
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5422-odroidxu3-common.dtsi"
-#include "exynos5422-odroidxu3-audio.dtsi"
-#include "exynos54xx-odroidxu-leds.dtsi"
-
-/ {
-	model = "Hardkernel Odroid XU3 Lite";
-	compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
-};
-
-&pwm {
-	/*
-	 * PWM 0 -- fan
-	 * PWM 1 -- Green LED
-	 * PWM 2 -- Blue LED
-	 * PWM 3 -- on MIPI connector for backlight
-	 */
-	pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	dr_mode = "peripheral";
-};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
deleted file mode 100644
index 9ed6564acfb0..000000000000
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Hardkernel Odroid XU3 board device tree source
- *
- * Copyright (c) 2014 Collabora Ltd.
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5422-odroidxu3-common.dtsi"
-#include "exynos5422-odroidxu3-audio.dtsi"
-#include "exynos54xx-odroidxu-leds.dtsi"
-
-/ {
-	model = "Hardkernel Odroid XU3";
-	compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
-};
-
-&i2c_0 {
-	status = "okay";
-
-	/* A15 cluster: VDD_ARM */
-	ina231@40 {
-		compatible = "ti,ina231";
-		reg = <0x40>;
-		shunt-resistor = <10000>;
-	};
-
-	/* memory: VDD_MEM */
-	ina231@41 {
-		compatible = "ti,ina231";
-		reg = <0x41>;
-		shunt-resistor = <10000>;
-	};
-
-	/* GPU: VDD_G3D */
-	ina231@44 {
-		compatible = "ti,ina231";
-		reg = <0x44>;
-		shunt-resistor = <10000>;
-	};
-
-	/* A7 cluster: VDD_KFC */
-	ina231@45 {
-		compatible = "ti,ina231";
-		reg = <0x45>;
-		shunt-resistor = <10000>;
-	};
-};
-
-&pwm {
-	/*
-	 * PWM 0 -- fan
-	 * PWM 1 -- Green LED
-	 * PWM 2 -- Blue LED
-	 * PWM 3 -- on MIPI connector for backlight
-	 */
-	pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	dr_mode = "peripheral";
-};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
deleted file mode 100644
index 2faf88627a48..000000000000
--- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Hardkernel Odroid XU4 board device tree source
- *
- * Copyright (c) 2015 Krzysztof Kozlowski
- * Copyright (c) 2014 Collabora Ltd.
- * Copyright (c) 2013-2015 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5422-odroidxu3-common.dtsi"
-
-/ {
-	model = "Hardkernel Odroid XU4";
-	compatible = "hardkernel,odroid-xu4", "samsung,exynos5800", \
-		     "samsung,exynos5";
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		blueled {
-			label = "blue:heartbeat";
-			pwms = <&pwm 2 2000000 0>;
-			pwm-names = "pwm2";
-			max_brightness = <255>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&pwm {
-	/*
-	 * PWM 0 -- fan
-	 * PWM 2 -- Blue LED
-	 */
-	pinctrl-0 = <&pwm0_out &pwm2_out>;
-	pinctrl-names = "default";
-	samsung,pwm-outputs = <0>, <2>;
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	dr_mode = "host";
-};
diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts
deleted file mode 100644
index ad6f533b3f40..000000000000
--- a/arch/arm/boot/dts/exynos5440-sd5v1.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * SAMSUNG SD5v1 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5440.dtsi"
-
-/ {
-	model = "SAMSUNG SD5v1 board based on EXYNOS5440";
-	compatible = "samsung,sd5v1", "samsung,exynos5440", "samsung,exynos5";
-
-	chosen {
-		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
-	};
-
-	/* FIXME: set reg property with correct start address and size */
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0>;
-	};
-
-	fixed-rate-clocks {
-		xtal {
-			compatible = "samsung,clock-xtal";
-			clock-frequency = <50000000>;
-		};
-	};
-
-	spi {
-		status = "disabled";
-	};
-
-};
-
-&gmac {
-	fixed_phy;
-	phy_addr = <1>;
-};
diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
deleted file mode 100644
index 92bd2c6f7631..000000000000
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * SAMSUNG SSDK5440 board device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5440.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "SAMSUNG SSDK5440 board based on EXYNOS5440";
-	compatible = "samsung,ssdk5440", "samsung,exynos5440", "samsung,exynos5";
-
-	chosen {
-		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
-	};
-
-	/* FIXME: set reg property with correct start address and size */
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0>;
-	};
-
-	fixed-rate-clocks {
-		xtal {
-			compatible = "samsung,clock-xtal";
-			clock-frequency = <50000000>;
-		};
-	};
-};
-
-&pcie_0 {
-	reset-gpio = <&pin_ctrl 5 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&pcie_1 {
-	reset-gpio = <&pin_ctrl 22 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&spi_0 {
-	flash: w25q128@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "winbond,w25q128";
-		spi-max-frequency = <15625000>;
-		reg = <0>;
-		controller-data {
-			samsung,spi-feedback-delay = <0>;
-		};
-
-		partition@00000 {
-			label = "BootLoader";
-			reg = <0x60000 0x80000>;
-			read-only;
-		};
-
-		partition@e0000 {
-			label = "Recovery-Kernel";
-			reg = <0xe0000 0x300000>;
-			read-only;
-		};
-
-		partition@3e0000 {
-			label = "CRAM-FS";
-			reg = <0x3e0000 0x700000>;
-			read-only;
-		};
-
-		partition@ae0000 {
-			label = "User-Data";
-			reg = <0xae0000 0x520000>;
-		};
-
-	};
-
-};
diff --git a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi
deleted file mode 100644
index 7b2fba0ae92b..000000000000
--- a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Device tree sources for Exynos5440 TMU sensor configuration
- *
- * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <5>;
-samsung,tmu_reference_voltage = <16>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <0x5d2d>;
-samsung,tmu_min_efuse_value = <16>;
-samsung,tmu_max_efuse_value = <76>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <70>;
-samsung,tmu_default_temp_offset = <25>;
-samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm/boot/dts/exynos5440-trip-points.dtsi b/arch/arm/boot/dts/exynos5440-trip-points.dtsi
deleted file mode 100644
index 356e963edf11..000000000000
--- a/arch/arm/boot/dts/exynos5440-trip-points.dtsi
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Device tree sources for default Exynos5440 thermal zone definition
- *
- * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-polling-delay-passive = <0>;
-polling-delay = <0>;
-trips {
-	cpu-alert-0 {
-		temperature = <100000>; /* millicelsius */
-		hysteresis = <0>; /* millicelsius */
-		type = "active";
-	};
-	cpu-crit-0 {
-		temperature = <105000>; /* millicelsius */
-		hysteresis = <0>; /* millicelsius */
-		type = "critical";
-	};
-};
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
deleted file mode 100644
index bc4954e69f7b..000000000000
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ /dev/null
@@ -1,348 +0,0 @@
-/*
- * SAMSUNG EXYNOS5440 SoC device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <dt-bindings/clock/exynos5440.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "samsung,exynos5440", "samsung,exynos5";
-
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		serial0 = &serial_0;
-		serial1 = &serial_1;
-		spi0 = &spi_0;
-		tmuctrl0 = &tmuctrl_0;
-		tmuctrl1 = &tmuctrl_1;
-		tmuctrl2 = &tmuctrl_2;
-	};
-
-	clock: clock-controller@160000 {
-		compatible = "samsung,exynos5440-clock";
-		reg = <0x160000 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	gic: interrupt-controller@2E0000 {
-		compatible = "arm,cortex-a15-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg =	<0x2E1000 0x1000>,
-			<0x2E2000 0x2000>,
-			<0x2E4000 0x2000>,
-			<0x2E6000 0x2000>;
-		interrupts = <GIC_PPI 9
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <2>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <3>;
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	timer {
-		compatible = "arm,cortex-a15-timer",
-			     "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		clock-frequency = <50000000>;
-	};
-
-	cpufreq@160000 {
-		compatible = "samsung,exynos5440-cpufreq";
-		reg = <0x160000 0x1000>;
-		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-		operating-points = <
-				/* KHz	  uV */
-				1500000 1100000
-				1400000 1075000
-				1300000 1050000
-				1200000 1025000
-				1100000 1000000
-				1000000 975000
-				900000  950000
-				800000  925000
-		>;
-	};
-
-	serial_0: serial@B0000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0xB0000 0x1000>;
-		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	serial_1: serial@C0000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0xC0000 0x1000>;
-		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	spi_0: spi@D0000 {
-		compatible = "samsung,exynos5440-spi";
-		reg = <0xD0000 0x100>;
-		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		samsung,spi-src-clk = <0>;
-		num-cs = <1>;
-		clocks = <&clock CLK_B_125>, <&clock CLK_SPI_BAUD>;
-		clock-names = "spi", "spi_busclk0";
-	};
-
-	pin_ctrl: pinctrl@E0000 {
-		compatible = "samsung,exynos5440-pinctrl";
-		reg = <0xE0000 0x1000>;
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		#gpio-cells = <2>;
-
-		fan: fan {
-			samsung,exynos5440-pin-function = <1>;
-		};
-
-		hdd_led0: hdd_led0 {
-			samsung,exynos5440-pin-function = <2>;
-		};
-
-		hdd_led1: hdd_led1 {
-			samsung,exynos5440-pin-function = <3>;
-		};
-
-		uart1: uart1 {
-			samsung,exynos5440-pin-function = <4>;
-		};
-	};
-
-	i2c@F0000 {
-		compatible = "samsung,exynos5440-i2c";
-		reg = <0xF0000 0x1000>;
-		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "i2c";
-	};
-
-	i2c@100000 {
-		compatible = "samsung,exynos5440-i2c";
-		reg = <0x100000 0x1000>;
-		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "i2c";
-	};
-
-	watchdog@110000 {
-		compatible = "samsung,s3c6410-wdt";
-		reg = <0x110000 0x1000>;
-		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "watchdog";
-	};
-
-	gmac: ethernet@00230000 {
-		compatible = "snps,dwmac-3.70a", "snps,dwmac";
-		reg = <0x00230000 0x8000>;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "macirq";
-		phy-mode = "sgmii";
-		clocks = <&clock CLK_GMAC0>;
-		clock-names = "stmmaceth";
-	};
-
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-	};
-
-	rtc@130000 {
-		compatible = "samsung,s3c6410-rtc";
-		reg = <0x130000 0x1000>;
-		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "rtc";
-	};
-
-	tmuctrl_0: tmuctrl@160118 {
-		compatible = "samsung,exynos5440-tmu";
-		reg = <0x160118 0x230>, <0x160368 0x10>;
-		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "tmu_apbif";
-		#include "exynos5440-tmu-sensor-conf.dtsi"
-	};
-
-	tmuctrl_1: tmuctrl@16011C {
-		compatible = "samsung,exynos5440-tmu";
-		reg = <0x16011C 0x230>, <0x160368 0x10>;
-		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "tmu_apbif";
-		#include "exynos5440-tmu-sensor-conf.dtsi"
-	};
-
-	tmuctrl_2: tmuctrl@160120 {
-		compatible = "samsung,exynos5440-tmu";
-		reg = <0x160120 0x230>, <0x160368 0x10>;
-		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "tmu_apbif";
-		#include "exynos5440-tmu-sensor-conf.dtsi"
-	};
-
-	thermal-zones {
-		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmuctrl_0>;
-			#include "exynos5440-trip-points.dtsi"
-		};
-		cpu1_thermal: cpu1-thermal {
-		       thermal-sensors = <&tmuctrl_1>;
-		       #include "exynos5440-trip-points.dtsi"
-		};
-		cpu2_thermal: cpu2-thermal {
-		       thermal-sensors = <&tmuctrl_2>;
-		       #include "exynos5440-trip-points.dtsi"
-		};
-	};
-
-	sata@210000 {
-		compatible = "snps,exynos5440-ahci";
-		reg = <0x210000 0x10000>;
-		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_SATA>;
-		clock-names = "sata";
-	};
-
-	ohci@220000 {
-		compatible = "samsung,exynos5440-ohci";
-		reg = <0x220000 0x1000>;
-		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_USB>;
-		clock-names = "usbhost";
-	};
-
-	ehci@221000 {
-		compatible = "samsung,exynos5440-ehci";
-		reg = <0x221000 0x1000>;
-		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_USB>;
-		clock-names = "usbhost";
-	};
-
-	pcie_phy0: pcie-phy@270000 {
-		#phy-cells = <0>;
-		compatible = "samsung,exynos5440-pcie-phy";
-		reg = <0x270000 0x1000>, <0x271000 0x40>;
-	};
-
-	pcie_phy1: pcie-phy@272000 {
-		#phy-cells = <0>;
-		compatible = "samsung,exynos5440-pcie-phy";
-		reg = <0x272000 0x1000>, <0x271040 0x40>;
-	};
-
-	pcie_0: pcie@290000 {
-		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
-		reg = <0x290000 0x1000>, <0x40000000 0x1000>;
-		reg-names = "elbi", "config";
-		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>;
-		clock-names = "pcie", "pcie_bus";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		phys = <&pcie_phy0>;
-		ranges = <0x81000000 0 0	  0x40001000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0x0 0 &gic 53>;
-		num-lanes = <4>;
-		status = "disabled";
-	};
-
-	pcie_1: pcie@2a0000 {
-		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
-		reg = <0x2a0000 0x1000>, <0x60000000 0x1000>;
-		reg-names = "elbi", "config";
-		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>;
-		clock-names = "pcie", "pcie_bus";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		phys = <&pcie_phy1>;
-		ranges = <0x81000000 0 0	  0x60001000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0x0 0 &gic 56>;
-		num-lanes = <4>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
deleted file mode 100644
index 0ed30206625c..000000000000
--- a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Hardkernel Odroid XU/XU3 LED device tree source
- *
- * Copyright (c) 2015,2016 Krzysztof Kozlowski
- * Copyright (c) 2014 Collabora Ltd.
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	pwmleds {
-		compatible = "pwm-leds";
-
-		greenled {
-			label = "green:mmc0";
-			pwms = <&pwm 1 2000000 0>;
-			pwm-names = "pwm1";
-			/*
-			 * Green LED is much brighter than the others
-			 * so limit its max brightness
-			 */
-			max_brightness = <127>;
-			linux,default-trigger = "mmc0";
-		};
-
-		blueled {
-			label = "blue:heartbeat";
-			pwms = <&pwm 2 2000000 0>;
-			pwm-names = "pwm2";
-			max_brightness = <255>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpioleds {
-		compatible = "gpio-leds";
-		redled {
-			label = "red:microSD";
-			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc1";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
deleted file mode 100644
index 0389e8a10d0b..000000000000
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * Samsung's Exynos54xx SoC series common device tree source
- *
- * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2016 Krzysztof Kozlowski
- *
- * Device nodes common for Samsung Exynos5410/5420/5422/5800. Specific
- * Exynos 54xx SoCs should include this file and customize it further
- * (e.g. with clocks).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "exynos5.dtsi"
-
-/ {
-	compatible = "samsung,exynos5";
-
-	aliases {
-		i2c4 = &hsi2c_4;
-		i2c5 = &hsi2c_5;
-		i2c6 = &hsi2c_6;
-		i2c7 = &hsi2c_7;
-		usbdrdphy0 = &usbdrd_phy0;
-		usbdrdphy1 = &usbdrd_phy1;
-	};
-
-	soc: soc {
-		sysram@02020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x54000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x54000>;
-
-			smp-sysram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sysram@53000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x53000 0x1000>;
-			};
-		};
-
-		mct: mct@101c0000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x101c0000 0xb00>;
-			interrupt-parent = <&mct_map>;
-			interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
-					<8>, <9>, <10>, <11>;
-
-			mct_map: mct-map {
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = <0 &combiner 23 3>,
-						<1 &combiner 23 4>,
-						<2 &combiner 25 2>,
-						<3 &combiner 25 3>,
-						<4 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>,
-						<5 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>,
-						<6 &gic 0 122 IRQ_TYPE_LEVEL_HIGH>,
-						<7 &gic 0 123 IRQ_TYPE_LEVEL_HIGH>,
-						<8 &gic 0 128 IRQ_TYPE_LEVEL_HIGH>,
-						<9 &gic 0 129 IRQ_TYPE_LEVEL_HIGH>,
-						<10 &gic 0 130 IRQ_TYPE_LEVEL_HIGH>,
-						<11 &gic 0 131 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		watchdog: watchdog@101d0000 {
-			compatible = "samsung,exynos5420-wdt";
-			reg = <0x101d0000 0x100>;
-			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		sss: sss@10830000 {
-			compatible = "samsung,exynos4210-secss";
-			reg = <0x10830000 0x300>;
-			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		/* i2c_0-3 are defined in exynos5.dtsi */
-		hsi2c_4: i2c@12ca0000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12ca0000 0x1000>;
-			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		hsi2c_5: i2c@12cb0000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12cb0000 0x1000>;
-			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		hsi2c_6: i2c@12cc0000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12cc0000 0x1000>;
-			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		hsi2c_7: i2c@12cd0000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12cd0000 0x1000>;
-			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		usbdrd3_0: usb3-0 {
-			compatible = "samsung,exynos5250-dwusb3";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			usbdrd_dwc3_0: dwc3@12000000 {
-				compatible = "snps,dwc3";
-				reg = <0x12000000 0x10000>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};
-
-		usbdrd_phy0: phy@12100000 {
-			compatible = "samsung,exynos5420-usbdrd-phy";
-			reg = <0x12100000 0x100>;
-			#phy-cells = <1>;
-		};
-
-		usbdrd3_1: usb3-1 {
-			compatible = "samsung,exynos5250-dwusb3";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			usbdrd_dwc3_1: dwc3@12400000 {
-				compatible = "snps,dwc3";
-				reg = <0x12400000 0x10000>;
-				phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};
-
-		usbdrd_phy1: phy@12500000 {
-			compatible = "samsung,exynos5420-usbdrd-phy";
-			reg = <0x12500000 0x100>;
-			#phy-cells = <1>;
-		};
-
-		usbhost2: usb@12110000 {
-			compatible = "samsung,exynos4210-ehci";
-			reg = <0x12110000 0x100>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				phys = <&usb2_phy 1>;
-			};
-		};
-
-		usbhost1: usb@12120000 {
-			compatible = "samsung,exynos4210-ohci";
-			reg = <0x12120000 0x100>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				phys = <&usb2_phy 1>;
-			};
-		};
-
-		usb2_phy: phy@12130000 {
-			compatible = "samsung,exynos5250-usb2-phy";
-			reg = <0x12130000 0x100>;
-			#phy-cells = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi
deleted file mode 100644
index 9ddb6bacac5a..000000000000
--- a/arch/arm/boot/dts/exynos5800.dtsi
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * SAMSUNG EXYNOS5800 SoC device tree source
- *
- * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * SAMSUNG EXYNOS5800 SoC device nodes are listed in this file.
- * EXYNOS5800 based board files can include this file and provide
- * values for board specfic bindings.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "exynos5420.dtsi"
-
-/ {
-	compatible = "samsung,exynos5800", "samsung,exynos5";
-};
-
-&clock {
-	compatible = "samsung,exynos5800-clock";
-};
-
-&cluster_a15_opp_table {
-	opp-1700000000 {
-		opp-microvolt = <1250000>;
-	};
-	opp-1600000000 {
-		opp-microvolt = <1250000>;
-	};
-	opp-1500000000 {
-		opp-microvolt = <1100000>;
-	};
-	opp-1400000000 {
-		opp-microvolt = <1100000>;
-	};
-	opp-1300000000 {
-		opp-microvolt = <1100000>;
-	};
-	opp-1200000000 {
-		opp-microvolt = <1000000>;
-	};
-	opp-1100000000 {
-		opp-microvolt = <1000000>;
-	};
-	opp-1000000000 {
-		opp-microvolt = <1000000>;
-	};
-	opp-900000000 {
-		opp-microvolt = <1000000>;
-	};
-	opp-800000000 {
-		opp-microvolt = <900000>;
-	};
-	opp-700000000 {
-		opp-microvolt = <900000>;
-	};
-	opp-600000000 {
-		opp-hz = /bits/ 64 <600000000>;
-		opp-microvolt = <900000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-500000000 {
-		opp-hz = /bits/ 64 <500000000>;
-		opp-microvolt = <900000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-400000000 {
-		opp-hz = /bits/ 64 <400000000>;
-		opp-microvolt = <900000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-300000000 {
-		opp-hz = /bits/ 64 <300000000>;
-		opp-microvolt = <900000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-200000000 {
-		opp-hz = /bits/ 64 <200000000>;
-		opp-microvolt = <900000>;
-		clock-latency-ns = <140000>;
-	};
-};
-
-&cluster_a7_opp_table {
-	opp-1300000000 {
-		opp-microvolt = <1250000>;
-	};
-	opp-1200000000 {
-		opp-microvolt = <1250000>;
-	};
-	opp-1100000000 {
-		opp-microvolt = <1250000>;
-	};
-	opp-1000000000 {
-		opp-microvolt = <1100000>;
-	};
-	opp-900000000 {
-		opp-microvolt = <1100000>;
-	};
-	opp-800000000 {
-		opp-microvolt = <1100000>;
-	};
-	opp-700000000 {
-		opp-microvolt = <1000000>;
-	};
-	opp-600000000 {
-		opp-microvolt = <1000000>;
-	};
-	opp-500000000 {
-		opp-hz = /bits/ 64 <500000000>;
-		opp-microvolt = <1000000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-400000000 {
-		opp-hz = /bits/ 64 <400000000>;
-		opp-microvolt = <1000000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-300000000 {
-		opp-hz = /bits/ 64 <300000000>;
-		opp-microvolt = <900000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-200000000 {
-		opp-hz = /bits/ 64 <200000000>;
-		opp-microvolt = <900000>;
-		clock-latency-ns = <140000>;
-	};
-};
-
-&mfc {
-	compatible = "samsung,mfc-v8";
-};
diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts
deleted file mode 100644
index 55f6a4f1f801..000000000000
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * Device Tree file for the Gemini-based Raidsonic NAS IB-4220-B
- */
-
-/dts-v1/;
-
-#include "gemini.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Raidsonic NAS IB-4220-B";
-	compatible = "raidsonic,ib-4220-b", "cortina,gemini";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory { /* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,19200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@29 {
-			debounce_interval = <50>;
-			wakeup-source;
-			linux,code = <KEY_SETUP>;
-			label = "Backup button";
-			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
-		};
-		button@31 {
-			debounce_interval = <50>;
-			wakeup-source;
-			linux,code = <KEY_RESTART>;
-			label = "Softreset button";
-			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led@28 {
-			label = "nas4220b:orange:hdd";
-			gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-		led@30 {
-			label = "nas4220b:green:os";
-			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	soc {
-		flash@30000000 {
-			status = "okay";
-			/* 16MB of flash */
-			reg = <0x30000000 0x01000000>;
-
-			partition@0 {
-				label = "RedBoot";
-				reg = <0x00000000 0x00020000>;
-				read-only;
-			};
-			partition@20000 {
-				label = "Kernel";
-				reg = <0x00020000 0x00300000>;
-			};
-			partition@320000 {
-				label = "Ramdisk";
-				reg = <0x00320000 0x00600000>;
-			};
-			partition@920000 {
-				label = "Application";
-				reg = <0x00920000 0x00600000>;
-			};
-			partition@f20000 {
-				label = "VCTL";
-				reg = <0x00f20000 0x00020000>;
-				read-only;
-			};
-			partition@f40000 {
-				label = "CurConf";
-				reg = <0x00f40000 0x000a0000>;
-				read-only;
-			};
-			partition@fe0000 {
-				label = "FIS directory";
-				reg = <0x00fe0000 0x00020000>;
-				read-only;
-			};
-		};
-
-		sata: sata@46000000 {
-			cortina,gemini-ata-muxmode = <0>;
-			cortina,gemini-enable-sata-bridge;
-			status = "okay";
-		};
-
-		ata@63000000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini-rut1xx.dts
deleted file mode 100644
index 7b920bfbda32..000000000000
--- a/arch/arm/boot/dts/gemini-rut1xx.dts
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Device Tree file for Teltonika RUT1xx
- */
-
-/dts-v1/;
-
-#include "gemini.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Teltonika RUT1xx";
-	compatible = "teltonika,rut1xx", "cortina,gemini";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory { /* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@28 {
-			debounce_interval = <50>;
-			wakeup-source;
-			linux,code = <KEY_SETUP>;
-			label = "Reset to defaults";
-			gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led@7 {
-			/* FIXME: add the LED color */
-			label = "rut1xx::gsm";
-			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-		led@31 {
-			/* FIXME: add the LED color */
-			label = "rut1xx::power";
-			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	soc {
-		flash@30000000 {
-			status = "okay";
-			/* 8MB of flash */
-			reg = <0x30000000 0x00800000>;
-			/* TODO: add flash partitions here */
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts
deleted file mode 100644
index 4d200f0bcd45..000000000000
--- a/arch/arm/boot/dts/gemini-sq201.dts
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Device Tree file for ITian Square One SQ201 NAS
- */
-
-/dts-v1/;
-
-#include "gemini.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "ITian Square One SQ201";
-	compatible = "itian,sq201", "cortina,gemini";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory { /* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@18 {
-			debounce_interval = <50>;
-			wakeup-source;
-			linux,code = <KEY_SETUP>;
-			label = "factory reset";
-			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led@20 {
-			label = "sq201:green:info";
-			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-		led@31 {
-			label = "sq201:green:usb";
-			gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "usb-host";
-		};
-	};
-
-	soc {
-		flash@30000000 {
-			status = "okay";
-			/* 16MB of flash */
-			reg = <0x30000000 0x01000000>;
-
-			partition@0 {
-				label = "RedBoot";
-				reg = <0x00000000 0x00120000>;
-				read-only;
-			};
-			partition@120000 {
-				label = "Kernel";
-				reg = <0x00120000 0x00200000>;
-			};
-			partition@320000 {
-				label = "Ramdisk";
-				reg = <0x00320000 0x00600000>;
-			};
-			partition@920000 {
-				label = "Application";
-				reg = <0x00920000 0x00600000>;
-			};
-			partition@f20000 {
-				label = "VCTL";
-				reg = <0x00f20000 0x00020000>;
-				read-only;
-			};
-			partition@f40000 {
-				label = "CurConf";
-				reg = <0x00f40000 0x000a0000>;
-				read-only;
-			};
-			partition@fe0000 {
-				label = "FIS directory";
-				reg = <0x00fe0000 0x00020000>;
-				read-only;
-			};
-		};
-
-		sata: sata@46000000 {
-			cortina,gemini-ata-muxmode = <0>;
-			cortina,gemini-enable-sata-bridge;
-			status = "okay";
-		};
-
-		pci@50000000 {
-			status = "okay";
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
-				<0x4800 0 0 2 &pci_intc 1>,
-				<0x4800 0 0 3 &pci_intc 2>,
-				<0x4800 0 0 4 &pci_intc 3>,
-				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
-				<0x5000 0 0 2 &pci_intc 2>,
-				<0x5000 0 0 3 &pci_intc 3>,
-				<0x5000 0 0 4 &pci_intc 0>,
-				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
-				<0x5800 0 0 2 &pci_intc 3>,
-				<0x5800 0 0 3 &pci_intc 0>,
-				<0x5800 0 0 4 &pci_intc 1>,
-				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
-				<0x6000 0 0 2 &pci_intc 0>,
-				<0x6000 0 0 3 &pci_intc 1>,
-				<0x6000 0 0 4 &pci_intc 2>;
-		};
-
-		ata@63000000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts
deleted file mode 100644
index 63b756e3bf5a..000000000000
--- a/arch/arm/boot/dts/gemini-wbd111.dts
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Device Tree file for Wiliboard WBD-111
- */
-
-/dts-v1/;
-
-#include "gemini.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Wiliboard WBD-111";
-	compatible = "wiliboard,wbd111", "cortina,gemini";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory { /* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@5 {
-			debounce_interval = <50>;
-			wakeup-source;
-			linux,code = <KEY_SETUP>;
-			label = "reset";
-			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led@1 {
-			label = "wbd111:red:L3";
-			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led@2 {
-			label = "wbd111:green:L4";
-			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led@3 {
-			label = "wbd111:red:L4";
-			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led@5 {
-			label = "wbd111:green:L3";
-			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	soc {
-		flash@30000000 {
-			status = "okay";
-			/* 8MB of flash */
-			reg = <0x30000000 0x00800000>;
-
-			partition@0 {
-				label = "RedBoot";
-				reg = <0x00000000 0x00020000>;
-				read-only;
-			};
-			partition@20000 {
-				label = "kernel";
-				reg = <0x00020000 0x00100000>;
-			};
-			partition@120000 {
-				label = "rootfs";
-				reg = <0x00120000 0x006a0000>;
-			};
-			partition@7c0000 {
-				label = "VCTL";
-				reg = <0x007c0000 0x00010000>;
-				read-only;
-			};
-			partition@7d0000 {
-				label = "cfg";
-				reg = <0x007d0000 0x00010000>;
-				read-only;
-			};
-			partition@7e0000 {
-				label = "FIS";
-				reg = <0x007e0000 0x00010000>;
-				read-only;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts
deleted file mode 100644
index 9747f5a47807..000000000000
--- a/arch/arm/boot/dts/gemini-wbd222.dts
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Device Tree file for Wiliboard WBD-222
- */
-
-/dts-v1/;
-
-#include "gemini.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Wiliboard WBD-222";
-	compatible = "wiliboard,wbd222", "cortina,gemini";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory { /* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@5 {
-			debounce_interval = <50>;
-			wakeup-source;
-			linux,code = <KEY_SETUP>;
-			label = "reset";
-			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led@1 {
-			label = "wbd111:red:L3";
-			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led@2 {
-			label = "wbd111:green:L4";
-			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led@3 {
-			label = "wbd111:red:L4";
-			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led@5 {
-			label = "wbd111:green:L3";
-			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	soc {
-		flash@30000000 {
-			status = "okay";
-			/* 8MB of flash */
-			reg = <0x30000000 0x00800000>;
-
-			partition@0 {
-				label = "RedBoot";
-				reg = <0x00000000 0x00020000>;
-				read-only;
-			};
-			partition@20000 {
-				label = "kernel";
-				reg = <0x00020000 0x00100000>;
-			};
-			partition@120000 {
-				label = "rootfs";
-				reg = <0x00120000 0x006a0000>;
-			};
-			partition@7c0000 {
-				label = "VCTL";
-				reg = <0x007c0000 0x00010000>;
-				read-only;
-			};
-			partition@7d0000 {
-				label = "cfg";
-				reg = <0x007d0000 0x00010000>;
-				read-only;
-			};
-			partition@7e0000 {
-				label = "FIS";
-				reg = <0x007e0000 0x00010000>;
-				read-only;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi
deleted file mode 100644
index 141d8d3a1d07..000000000000
--- a/arch/arm/boot/dts/gemini.dtsi
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * Device Tree file for Cortina systems Gemini SoC
- */
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-		interrupt-parent = <&intcon>;
-
-		flash@30000000 {
-			compatible = "cortina,gemini-flash", "cfi-flash";
-			syscon = <&syscon>;
-			bank-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-		};
-
-		syscon: syscon@40000000 {
-			compatible = "cortina,gemini-syscon",
-				     "syscon", "simple-mfd";
-			reg = <0x40000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-
-			syscon-reboot {
-				compatible = "syscon-reboot";
-				regmap = <&syscon>;
-				/* GLOBAL_RESET register */
-				offset = <0x0c>;
-				/* RESET_GLOBAL | RESET_CPU1 */
-				mask = <0xC0000000>;
-			};
-		};
-
-		watchdog@41000000 {
-			compatible = "cortina,gemini-watchdog";
-			reg = <0x41000000 0x1000>;
-			interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&syscon 23>;
-			clocks = <&syscon 2>;
-		};
-
-		uart0: serial@42000000 {
-			compatible = "ns16550a";
-			reg = <0x42000000 0x100>;
-			resets = <&syscon 18>;
-			clocks = <&syscon 6>;
-			interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-		};
-
-		timer@43000000 {
-			compatible = "faraday,fttmr010";
-			reg = <0x43000000 0x1000>;
-			interrupt-parent = <&intcon>;
-			interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */
-				     <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */
-				     <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */
-			resets = <&syscon 17>;
-			/* APB clock or RTC clock */
-			clocks = <&syscon 2>, <&syscon 0>;
-			clock-names = "PCLK", "EXTCLK";
-			syscon = <&syscon>;
-		};
-
-		rtc@45000000 {
-			compatible = "cortina,gemini-rtc";
-			reg = <0x45000000 0x100>;
-			interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&syscon 16>;
-			clocks = <&syscon 2>, <&syscon 0>;
-			clock-names = "PCLK", "EXTCLK";
-		};
-
-		sata: sata@46000000 {
-			compatible = "cortina,gemini-sata-bridge";
-			reg = <0x46000000 0x100>;
-			resets = <&syscon 26>,
-				 <&syscon 27>;
-			reset-names = "sata0", "sata1";
-			clocks = <&syscon 10>,
-				 <&syscon 11>;
-			clock-names = "SATA0_PCLK", "SATA1_PCLK";
-			syscon = <&syscon>;
-			status = "disabled";
-		};
-
-		intcon: interrupt-controller@48000000 {
-			compatible = "faraday,ftintc010";
-			reg = <0x48000000 0x1000>;
-			resets = <&syscon 14>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		power-controller@4b000000 {
-			compatible = "cortina,gemini-power-controller";
-			reg = <0x4b000000 0x100>;
-			interrupts = <26 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		gpio0: gpio@4d000000 {
-			compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
-			reg = <0x4d000000 0x100>;
-			interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&syscon 20>;
-			clocks = <&syscon 2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio1: gpio@4e000000 {
-			compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
-			reg = <0x4e000000 0x100>;
-			interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&syscon 21>;
-			clocks = <&syscon 2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio2: gpio@4f000000 {
-			compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
-			reg = <0x4f000000 0x100>;
-			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&syscon 22>;
-			clocks = <&syscon 2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pci@50000000 {
-			compatible = "cortina,gemini-pci", "faraday,ftpci100";
-			/*
-			 * The first 256 bytes in the IO range is actually used
-			 * to configure the host bridge.
-			 */
-			reg = <0x50000000 0x100>;
-			resets = <&syscon 7>;
-			clocks = <&syscon 15>, <&syscon 4>;
-			clock-names = "PCLK", "PCICLK";
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			status = "disabled";
-
-			bus-range = <0x00 0xff>;
-			/* PCI ranges mappings */
-			ranges =
-			/* 1MiB I/O space 0x50000000-0x500fffff */
-			<0x01000000 0 0          0x50000000 0 0x00100000>,
-			/* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */
-			<0x02000000 0 0x58000000 0x58000000 0 0x08000000>;
-
-			/* DMA ranges */
-			dma-ranges =
-			/* 128MiB at 0x00000000-0x07ffffff */
-			<0x02000000 0 0x00000000 0x00000000 0 0x08000000>,
-			/* 64MiB at 0x00000000-0x03ffffff */
-			<0x02000000 0 0x00000000 0x00000000 0 0x04000000>,
-			/* 64MiB at 0x00000000-0x03ffffff */
-			<0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
-
-			/*
-			 * This PCI host bridge variant has a cascaded interrupt
-			 * controller embedded in the host bridge.
-			 */
-			pci_intc: interrupt-controller {
-				interrupt-parent = <&intcon>;
-				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		ata@63000000 {
-			compatible = "cortina,gemini-pata", "faraday,ftide010";
-			reg = <0x63000000 0x1000>;
-			interrupts = <4 IRQ_TYPE_EDGE_RISING>;
-			resets = <&syscon 2>;
-			clocks = <&syscon 14>;
-			clock-names = "PCLK";
-			sata = <&sata>;
-			status = "disabled";
-		};
-
-		ata@63400000 {
-			compatible = "cortina,gemini-pata", "faraday,ftide010";
-			reg = <0x63400000 0x1000>;
-			interrupts = <5 IRQ_TYPE_EDGE_RISING>;
-			resets = <&syscon 2>;
-			clocks = <&syscon 14>;
-			clock-names = "PCLK";
-			sata = <&sata>;
-			status = "disabled";
-		};
-
-		dma-controller@67000000 {
-			compatible = "faraday,ftdma020", "arm,pl080", "arm,primecell";
-			/* Faraday Technology FTDMAC020 variant */
-			arm,primecell-periphid = <0x0003b080>;
-			reg = <0x67000000 0x1000>;
-			interrupts = <9 IRQ_TYPE_EDGE_RISING>;
-			resets = <&syscon 10>;
-			clocks = <&syscon 1>;
-			clock-names = "apb_pclk";
-			/* Bus interface AHB1 (AHB0) is totally tilted */
-			lli-bus-interface-ahb2;
-			mem-bus-interface-ahb2;
-			memcpy-burst-size = <256>;
-			memcpy-bus-width = <32>;
-			#dma-cells = <2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/gemini/Makefile b/arch/arm/boot/dts/gemini/Makefile
new file mode 100644
index 000000000000..f9f63ce3eb49
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_GEMINI) += \
+	gemini-dlink-dir-685.dtb \
+	gemini-dlink-dns-313.dtb \
+	gemini-nas4220b.dtb \
+	gemini-ns2502.dtb \
+	gemini-rut1xx.dtb \
+	gemini-sl93512r.dtb \
+	gemini-sq201.dtb \
+	gemini-ssi1328.dtb \
+	gemini-wbd111.dtb \
+	gemini-wbd222.dtb
diff --git a/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts
new file mode 100644
index 000000000000..b4dbcf8f168e
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts
@@ -0,0 +1,492 @@
+/*
+ * Device Tree file for D-Link DIR-685 Xtreme N Storage Router
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "D-Link DIR-685 Xtreme N Storage Router";
+	compatible = "dlink,dir-685", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB SDRAM in 2 x Hynix HY5DU121622DTP-D43 */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait consoleblank=300";
+		stdout-path = "uart0:19200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			/* Collides with LPC_LAD[0], UART DCD, SSP 97RST */
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+		button-eject {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_EJECTCD>;
+			label = "unmount";
+			/* Collides with LPC LFRAME, UART RTS, SSP TXD */
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vdisp: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "display-power";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		/* Collides with LCD E */
+		gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Collides with IDE pins, that's cool (we do not use them) */
+		sck-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		panel: display@0 {
+			compatible = "dlink,dir-685-panel", "ilitek,ili9322";
+			reg = <0>;
+			/* 50 ns min period = 20 MHz */
+			spi-max-frequency = <20000000>;
+			vcc-supply = <&vdisp>;
+			iovcc-supply = <&vdisp>;
+			vci-supply = <&vdisp>;
+
+			port {
+				panel_in: endpoint {
+					remote-endpoint = <&display_out>;
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-wps {
+			label = "dir685:blue:WPS";
+			/* Collides with ICE */
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		/*
+		 * These two LEDs are on the side of the device.
+		 * For electrical reasons, both LEDs cannot be active
+		 * at the same time so only blue or orange can be on at
+		 * one time. Enabling both makes the LED go dark.
+		 * The LEDs both sit inside the unmount button and the
+		 * label on the case says "unmount".
+		 */
+		led-blue-hd {
+			label = "dir685:blue:HD";
+			/* Collides with LPC_SERIRQ, UART DTR, SSP FSC pins */
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "disk-read";
+		};
+		led-orange-hd {
+			label = "dir685:orange:HD";
+			/* Collides with LPC_LAD[2], UART DSR, SSP ECLK pins */
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "disk-write";
+		};
+	};
+
+	/*
+	 * This is a Sunon Maglev GM0502PFV2-8 cooling fan @10000 RPM.
+	 * sensor. It is turned on when the temperature exceeds 46 degrees
+	 * and turned off when the temperatures goes below 41 degrees
+	 * (celsius).
+	 */
+	fan0: gpio-fan {
+		compatible = "gpio-fan";
+		/* Collides with IDE */
+		gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0 0>, <10000 1>;
+		#cooling-cells = <2>;
+	};
+
+	thermal-zones {
+		chassis-thermal {
+			/* Poll every 20 seconds */
+			polling-delay = <20000>;
+			/* Poll every 2nd second when cooling */
+			polling-delay-passive = <2000>;
+			/*  Use the thermal sensor in the hard drive */
+			thermal-sensors = <&drive0>;
+
+			/* Tripping points from the fan.script in the rootfs */
+			trips {
+				alert: chassis-alert {
+					/* At 43 degrees turn on the fan */
+					temperature = <43000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+				crit: chassis-crit {
+					/* Just shut down at 60 degrees */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&alert>;
+					cooling-device = <&fan0 1 1>;
+				};
+			};
+		};
+	};
+
+	/*
+	 * The touchpad input is connected to a GPIO bit-banged
+	 * I2C bus.
+	 */
+	i2c {
+		compatible = "i2c-gpio";
+		/* Collides with ICE */
+		sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		touchkeys@26 {
+			compatible = "dlink,dir685-touchkeys";
+			reg = <0x26>;
+			interrupt-parent = <&gpio0>;
+			/* Collides with NAND flash */
+			interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+
+	/* This is a RealTek RTL8366RB switch and PHY using SMI over GPIO */
+	ethernet-switch {
+		compatible = "realtek,rtl8366rb";
+		/* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
+		mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+		mdio-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		realtek,disable-leds;
+
+		switch_intc: interrupt-controller {
+			/* GPIO 15 provides the interrupt */
+			interrupt-parent = <&gpio0>;
+			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet-port@0 {
+				reg = <0>;
+				label = "lan0";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				reg = <1>;
+				label = "lan1";
+				phy-handle = <&phy1>;
+			};
+			ethernet-port@2 {
+				reg = <2>;
+				label = "lan2";
+				phy-handle = <&phy2>;
+			};
+			ethernet-port@3 {
+				reg = <3>;
+				label = "lan3";
+				phy-handle = <&phy3>;
+			};
+			ethernet-port@4 {
+				reg = <4>;
+				label = "wan";
+				phy-handle = <&phy4>;
+			};
+			rtl8366rb_cpu_port: ethernet-port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&gmac0>;
+				phy-mode = "rgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+
+		};
+
+		mdio {
+			compatible = "realtek,smi-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+				interrupt-parent = <&switch_intc>;
+				interrupts = <0>;
+			};
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+				interrupt-parent = <&switch_intc>;
+				interrupts = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				reg = <2>;
+				interrupt-parent = <&switch_intc>;
+				interrupts = <2>;
+			};
+			phy3: ethernet-phy@3 {
+				reg = <3>;
+				interrupt-parent = <&switch_intc>;
+				interrupts = <3>;
+			};
+			phy4: ethernet-phy@4 {
+				reg = <4>;
+				interrupt-parent = <&switch_intc>;
+				interrupts = <12>;
+			};
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			/*
+			 * Flash access collides with the Chip Enable signal for
+			 * the display panel, that reuse the parallel flash Chip
+			 * Select 1 (CS1). We switch the pin control state so we
+			 * enable these pins for flash access only when we need
+			 * then, and when disabled they can be used for GPIO which
+			 * is what the display panel needs.
+			 */
+			status = "okay";
+			pinctrl-names = "enabled", "disabled";
+			pinctrl-0 = <&pflash_default_pins>;
+			pinctrl-1 = <&pflash_disabled_pins>;
+
+			/* 32MB of flash */
+			reg = <0x30000000 0x02000000>;
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/*
+				 * This "RedBoot" is the Storlink derivative.
+				 */
+				partition@0 {
+					label = "RedBoot";
+					reg = <0x00000000 0x00040000>;
+					read-only;
+				};
+				/*
+				 * This firmware image contains the kernel catenated
+				 * with the squashfs root filesystem. For some reason
+				 * this is called "upgrade" on the vendor system.
+				 */
+				partition@40000 {
+					label = "upgrade";
+					reg = <0x00040000 0x01f40000>;
+					read-only;
+				};
+				/* RGDB, Residental Gateway Database? */
+				partition@1f80000 {
+					label = "rgdb";
+					reg = <0x01f80000 0x00040000>;
+					read-only;
+				};
+				/*
+				 * This partition contains MAC addresses for WAN,
+				 * WLAN and LAN, and the country code (for wireless
+				 * I guess).
+				 */
+				partition@1fc0000 {
+					label = "nvram";
+					reg = <0x01fc0000 0x00020000>;
+					read-only;
+				};
+				partition@1fe0000 {
+					label = "LangPack";
+					reg = <0x01fe0000 0x00020000>;
+					read-only;
+				};
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0bgrp cover line 5, 6 used by TK I2C
+				 * gpio0bgrp cover line 7 used by WPS LED
+				 * gpio0cgrp cover line 8, 13 used by keys
+				 *           and 11, 12 used by the HD LEDs
+				 *           and line 14, 15 used by RTL8366
+				 *           RESET and phy ready
+				 * gpio0egrp cover line 16 used by VDISP
+				 * gpio0fgrp cover line 17 used by TK IRQ
+				 * gpio0ggrp cover line 20 used by panel CS
+				 * gpio0hgrp cover line 21,22 used by RTL8366RB MDIO
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0bgrp",
+						"gpio0cgrp",
+						"gpio0egrp",
+						"gpio0fgrp",
+						"gpio0hgrp";
+					};
+				};
+				/*
+				 * gpio1bgrp cover line 5,8,7 used by panel SPI
+				 * also line 6 used by the fan
+				 *
+				 */
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						groups = "gpio1bgrp";
+					};
+				};
+				/*
+				 * These GPIO groups will be mapped in over some
+				 * of the flash pins when the flash is not in
+				 * active use.
+				 */
+				pflash_disabled_pins: pinctrl-pflash-disabled {
+					mux {
+						function = "gpio0";
+						groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
+							 "gpio0kgrp";
+					};
+				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp";
+					};
+					conf0 {
+						pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV",
+						     "Y7 GMAC0 RXC", "Y11 GMAC1 RXC",
+						     "T8 GMAC0 TXEN", "W11 GMAC1 TXEN",
+						     "U8 GMAC0 TXC", "V11 GMAC1 TXC",
+						     "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
+						     "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
+						     "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
+						     "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
+						     "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
+						     "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
+						     "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
+						     "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					/* Set up drive strength on GMAC0 to 16 mA */
+					conf1 {
+						groups = "gmii_gmac0_grp";
+						drive-strength = <16>;
+					};
+				};
+			};
+		};
+
+		sata: sata@46000000 {
+			cortina,gemini-ata-muxmode = <0>;
+			cortina,gemini-enable-sata-bridge;
+			status = "okay";
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
+		ide@63000000 {
+			status = "okay";
+
+			/*
+			 * This drive may have a temperature sensor with a
+			 * thermal zone we can use for thermal control of the
+			 * chassis temperature using the fan.
+			 */
+			drive0: ide-port@0 {
+				reg = <0>;
+				#thermal-sensor-cells = <0>;
+			};
+		};
+
+		display-controller@6a000000 {
+			status = "okay";
+
+			port {
+				display_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts
new file mode 100644
index 000000000000..8c54d3a5a721
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for D-Link DNS-313 1-Bay Network Storage Enclosure
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	model = "D-Link DNS-313 1-Bay Network Storage Enclosure";
+	compatible = "dlink,dns-313", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB SDRAM in a Nanya NT5DS32M16BS-6K package */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 root=/dev/sda4 rw rootwait";
+		stdout-path = "uart0:19200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-power {
+			label = "dns313:blue:power";
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-disk-blue {
+			label = "dns313:blue:disk";
+			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-disk-green {
+			label = "dns313:green:disk";
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "disk-read";
+		};
+		led-disk-red {
+			label = "dns313:red:disk";
+			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "disk-write";
+		};
+	};
+
+	/*
+	 * This is a ADDA AD0405GB-G73 fan @3000 and 6000 RPM.
+	 */
+	fan0: gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
+			<&gpio0 12 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0 0>, <3000 1>, <6000 2>;
+		#cooling-cells = <2>;
+	};
+
+	/*
+	 * This is the type B USB connector on the device,
+	 * a GPIO-controlled USB VBUS detect
+	 */
+	usb1_phy: phy {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		#phy-cells = <0>;
+		vbus-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+	};
+
+	/* Global Mixed-Mode Technology G751 mounted on GPIO I2C */
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		g751: temperature-sensor@48 {
+			compatible = "gmt,g751";
+			reg = <0x48>;
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
+	thermal-zones {
+		chassis-thermal {
+			/* Poll every 20 seconds */
+			polling-delay = <20000>;
+			/* Poll every 2nd second when cooling */
+			polling-delay-passive = <2000>;
+
+			thermal-sensors = <&g751>;
+
+			/* Tripping points from the fan.script in the rootfs */
+			trips {
+				chassis_alert0: chassis-alert0 {
+					/* At 43 degrees turn on low speed */
+					temperature = <43000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+				chassis_alert1: chassis-alert1 {
+					/* At 47 degrees turn on high speed */
+					temperature = <47000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+				chassis_crit: chassis-crit {
+					/* Just shut down at 60 degrees */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&chassis_alert0>;
+					cooling-device = <&fan0 1 1>;
+				};
+				map1 {
+					trip = <&chassis_alert1>;
+					cooling-device = <&fan0 2 2>;
+				};
+			};
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		/* Uses MDC and MDIO */
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* This is a Realtek RTL8211B Gigabit ethernet transceiver */
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			/*
+			 * This is a Eon EN29LV400AB 512 KiB flash with
+			 * three partitions.
+			 */
+			compatible = "cortina,gemini-flash", "jedec-flash";
+			status = "okay";
+			reg = <0x30000000 0x00080000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/*
+			 * This "RedBoot" is the Storlink derivative.
+			 */
+			partition@0 {
+				label = "RedBoot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "MTD1";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+			partition@60000 {
+				label = "MTD2";
+				reg = <0x00060000 0x00020000>;
+				read-only;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups =
+						/* Used by LEDs conflicts ICE */
+						"gpio0bgrp",
+						/* Used by ? conflicts ICE */
+						"gpio0cgrp",
+						/*
+						 * Used by fan & G751, conflicts LPC,
+						 * UART modem lines, SSP
+						 */
+						"gpio0egrp",
+						/* Used by G751 */
+						"gpio0fgrp",
+						/* Used by MDIO */
+						"gpio0igrp";
+					};
+				};
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						/* Used by "reset" button */
+						groups = "gpio1dgrp";
+					};
+				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp";
+					};
+					/*
+					 * In the vendor Linux tree, these values are set for the C3
+					 * version of the SL3512 ASIC with the comment "benson suggest"
+					 */
+					conf0 {
+						pins = "R8 GMAC0 RXDV", "U11 GMAC1 RXDV";
+						skew-delay = <0>;
+					};
+					conf1 {
+						pins = "T8 GMAC0 RXC";
+						skew-delay = <10>;
+					};
+					conf2 {
+						pins = "T11 GMAC1 RXC";
+						skew-delay = <15>;
+					};
+					conf3 {
+						pins = "P8 GMAC0 TXEN", "V11 GMAC1 TXEN";
+						skew-delay = <7>;
+					};
+					conf4 {
+						pins = "V7 GMAC0 TXC", "P10 GMAC1 TXC";
+						skew-delay = <10>;
+					};
+					conf5 {
+						/* The data lines all have default skew */
+						pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1",
+						       "P9 GMAC0 RXD2", "R9 GMAC0 RXD3",
+						       "R11 GMAC1 RXD0", "P11 GMAC1 RXD1",
+						       "V12 GMAC1 RXD2", "U12 GMAC1 RXD3",
+						       "R10 GMAC1 TXD0", "T10 GMAC1 TXD1",
+						       "U10 GMAC1 TXD2", "V10 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					conf6 {
+						pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1",
+						       "R7 GMAC0 TXD2", "P7 GMAC0 TXD3";
+						skew-delay = <5>;
+					};
+					/* Set up drive strength on GMAC0 to 16 mA */
+					conf7 {
+						groups = "gmii_gmac0_grp";
+						drive-strength = <16>;
+					};
+				};
+			};
+		};
+
+		sata: sata@46000000 {
+			/* The ROM uses this muxmode */
+			cortina,gemini-ata-muxmode = <0>;
+			cortina,gemini-enable-sata-bridge;
+			status = "okay";
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
+		ide@63000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+			dr_mode = "peripheral";
+			usb-phy = <&usb1_phy>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_default_pins>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini/gemini-nas4220b.dts
new file mode 100644
index 000000000000..6544c730340f
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-nas4220b.dts
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for the Gemini-based Raidsonic NAS IB-4220-B
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Raidsonic NAS IB-4220-B";
+	compatible = "raidsonic,ib-4220-b", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-setup {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_SETUP>;
+			label = "Backup button";
+			/* Conflict with TVC */
+			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+		};
+		button-restart {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "Softreset button";
+			/* Conflict with TVC */
+			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-orange-hdd {
+			label = "nas4220b:orange:hdd";
+			/* Conflict with TVC */
+			gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		led-green-os {
+			label = "nas4220b:green:os";
+			/* Conflict with TVC */
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 16MB of flash */
+			reg = <0x30000000 0x01000000>;
+
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0xfe0000 */
+				fis-index-block = <0x7f>;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio1dgrp cover line 28-31 otherwise used
+				 * by TVC.
+				 */
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						groups = "gpio1dgrp";
+					};
+				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp";
+					};
+					/* Settings come from OpenWRT, pins on SL3516 */
+					conf0 {
+						pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV";
+						skew-delay = <0>;
+					};
+					conf1 {
+						pins = "Y7 GMAC0 RXC", "Y11 GMAC1 RXC";
+						skew-delay = <15>;
+					};
+					conf2 {
+						pins = "T8 GMAC0 TXEN", "W11 GMAC1 TXEN";
+						skew-delay = <7>;
+					};
+					conf3 {
+						pins = "U8 GMAC0 TXC";
+						skew-delay = <11>;
+					};
+					conf4 {
+						pins = "V11 GMAC1 TXC";
+						skew-delay = <10>;
+					};
+					conf5 {
+						/* The data lines all have default skew */
+						pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
+						       "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
+						       "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
+						       "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
+						       "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
+						       "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
+						       "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
+						       "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					/* Set up drive strength on GMAC0 to 16 mA */
+					conf6 {
+						groups = "gmii_gmac0_grp";
+						drive-strength = <16>;
+					};
+				};
+			};
+		};
+
+		sata: sata@46000000 {
+			cortina,gemini-ata-muxmode = <0>;
+			cortina,gemini-enable-sata-bridge;
+			status = "okay";
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
+		ide@63000000 {
+			status = "okay";
+		};
+
+		ide@63400000 {
+			status = "okay";
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini/gemini-ns2502.dts b/arch/arm/boot/dts/gemini/gemini-ns2502.dts
new file mode 100644
index 000000000000..e6eeb35e8819
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-ns2502.dts
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
+ * Device Tree file for Edimax NS 2502
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+
+/ {
+	model = "Edimax NS-2502";
+	compatible = "edimax,ns-2502", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8";
+		stdout-path = &uart0;
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+};
+
+&ethernet {
+	status = "okay";
+	ethernet-port@0 {
+		phy-mode = "rgmii-id";
+		phy-handle = <&phy0>;
+	};
+};
+
+&flash {
+	status = "okay";
+	/* 8MB of flash */
+	reg = <0x30000000 0x00800000>;
+
+	pinctrl-names = "enabled", "disabled";
+	pinctrl-0 = <&pflash_default_pins>;
+	pinctrl-1 = <&pflash_disabled_pins>;
+
+	partitions {
+		compatible = "redboot-fis";
+		/* Eraseblock at 0x7e0000 */
+		fis-index-block = <0x3f>;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_default_pins>;
+};
+
+&ide0 {
+	status = "okay";
+};
+
+&ide1 {
+	status = "okay";
+};
+
+&sata {
+	cortina,gemini-ata-muxmode = <3>;
+	cortina,gemini-enable-sata-bridge;
+	status = "okay";
+};
+
+&syscon {
+	pinctrl {
+		/*
+		 * gpio0agrp cover line 0-4
+		 * gpio0bgrp cover line 5
+		 */
+		gpio0_default_pins: pinctrl-gpio0 {
+			    mux {
+				    function = "gpio0";
+				    groups = "gpio0agrp", "gpio0bgrp", "gpio0hgrp";
+			    };
+		};
+		pflash_disabled_pins: pinctrl-pflash-disabled {
+			mux {
+				function = "gpio0";
+				groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
+					 "gpio0kgrp";
+			};
+		};
+		pinctrl-gmii {
+			mux {
+				function = "gmii";
+				groups = "gmii_gmac0_grp";
+				};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/gemini/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini/gemini-rut1xx.dts
new file mode 100644
index 000000000000..0ebda4efd9d0
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-rut1xx.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Teltonika RUT1xx
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Teltonika RUT1xx";
+	compatible = "teltonika,rut1xx", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-setup {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_SETUP>;
+			label = "Reset to defaults";
+			/* Conflict with TVC */
+			gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-gsm {
+			/* FIXME: add the LED color */
+			label = "rut1xx::gsm";
+			/* Conflict with ICE */
+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		led-power {
+			/* FIXME: add the LED color */
+			label = "rut1xx::power";
+			/* Conflict with NAND CE0 */
+			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 8MB of flash */
+			reg = <0x30000000 0x00800000>;
+			/* TODO: add flash partitions here */
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0bgrp cover line 7 used by GSM LED
+				 * gpio0fgrp cover line 17 used by power LED
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0bgrp",
+						"gpio0fgrp";
+					};
+				};
+				/*
+				 * gpio1dgrp cover line 28-31 otherwise used
+				 * by TVC.
+				 */
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						groups = "gpio1dgrp";
+					};
+				};
+			};
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
new file mode 100644
index 000000000000..4992ec276de9
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for the Storm Semiconductor SL93512R_BRD
+ * Gemini reference design, also initially called
+ * "Gemini324 EV-Board" before Storm acquired Storlink Semiconductor.
+ * The series were later acquired by Cortina Systems.
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Storlink Semiconductor Gemini324 EV-Board / Storm Semiconductor SL93512R_BRD";
+	compatible = "storlink,gemini324", "storm,sl93512r", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB Samsung K4H511638B */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <KEY_WPS_BUTTON>;
+			label = "WPS";
+			/* Conflicts with TVC and extended flash */
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button-setup {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "factory reset";
+			/* Conflict with NAND flash */
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-green-harddisk {
+			label = "sq201:green:harddisk";
+			/* Conflict with LCD (no problem) */
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "disk-activity";
+		};
+		led-green-wireless {
+			label = "sq201:green:wireless";
+			/* Conflict with NAND flash CE0 (no problem) */
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		/* Uses MDC and MDIO */
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* This is a Marvell 88E1111 ethernet transciever */
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* Check pin collisions */
+		sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		ethernet-switch@0 {
+			compatible = "vitesse,vsc7385";
+			reg = <0>;
+			/* Specified for 2.5 MHz or below */
+			spi-max-frequency = <2500000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-port@0 {
+					reg = <0>;
+					label = "lan1";
+				};
+				ethernet-port@1 {
+					reg = <1>;
+					label = "lan2";
+				};
+				ethernet-port@2 {
+					reg = <2>;
+					label = "lan3";
+				};
+				ethernet-port@3 {
+					reg = <3>;
+					label = "lan4";
+				};
+				vsc: ethernet-port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 16MB of flash */
+			reg = <0x30000000 0x01000000>;
+
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0xfe0000 */
+				fis-index-block = <0x1fc>;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0agrp cover line 0, used by WPS button
+				 * gpio0fgrp cover line 16 used by HD LED
+				 * gpio0ggrp cover line 17, 18 used by wireless LAN LED and
+				 * reset button OR USB ID select on 17 and USB VBUS select
+				 * on 18. (Confusing.)
+				 * gpio0igrp cover line 21, 22 used by MDIO for Marvell PHY
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0agrp",
+						"gpio0fgrp",
+						"gpio0ggrp",
+						"gpio0igrp";
+					};
+				};
+				/*
+				 * gpio1dgrp cover lines used by SPI for
+				 * the Vitesse chip (28-31)
+				 */
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						groups = "gpio1dgrp";
+					};
+				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+					};
+					/* Control pad skew comes from sl_switch.c in the vendor code */
+					conf0 {
+						pins = "P10 GMAC1 TXC";
+						skew-delay = <5>;
+					};
+					conf1 {
+						pins = "V11 GMAC1 TXEN";
+						skew-delay = <7>;
+					};
+					conf2 {
+						pins = "T11 GMAC1 RXC";
+						skew-delay = <8>;
+					};
+					conf3 {
+						pins = "U11 GMAC1 RXDV";
+						skew-delay = <7>;
+					};
+					conf4 {
+						pins = "V7 GMAC0 TXC";
+						skew-delay = <10>;
+					};
+					conf5 {
+						pins = "P8 GMAC0 TXEN";
+						skew-delay = <7>; /* 5 at another place? */
+					};
+					conf6 {
+						pins = "T8 GMAC0 RXC";
+						skew-delay = <15>;
+					};
+					conf7 {
+						pins = "R8 GMAC0 RXDV";
+						skew-delay = <0>;
+					};
+					conf8 {
+						/* The data lines all have default skew */
+						pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1",
+						       "P9 GMAC0 RXD2", "R9 GMAC0 RXD3",
+						       "R11 GMAC1 RXD0", "P11 GMAC1 RXD1",
+						       "V12 GMAC1 RXD2", "U12 GMAC1 RXD3",
+						       "R10 GMAC1 TXD0", "T10 GMAC1 TXD1",
+						       "U10 GMAC1 TXD2", "V10 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					/* Appears in sl351x_gmac.c in the vendor code */
+					conf9 {
+						pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1",
+						       "R7 GMAC0 TXD2", "P7 GMAC0 TXD3";
+						skew-delay = <5>;
+					};
+				};
+			};
+		};
+
+		/* Both interfaces brought out on SATA connectors */
+		sata: sata@46000000 {
+			cortina,gemini-ata-muxmode = <0>;
+			cortina,gemini-enable-sata-bridge;
+			status = "okay";
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				phy-mode = "rgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+
+		ide@63000000 {
+			status = "okay";
+		};
+
+		ide@63400000 {
+			status = "okay";
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini/gemini-sq201.dts b/arch/arm/boot/dts/gemini/gemini-sq201.dts
new file mode 100644
index 000000000000..f8c6f6e5cdea
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-sq201.dts
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for ITian Square One SQ201 NAS
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "ITian Square One SQ201";
+	compatible = "itian,sq201", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-setup {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "factory reset";
+			/* Conflict with NAND flash */
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-green-info {
+			label = "sq201:green:info";
+			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-green-usb {
+			label = "sq201:green:usb";
+			gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "usb-host";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		/* Uses MDC and MDIO */
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* This is a Marvell 88E1111 ethernet transciever */
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* Check pin collisions */
+		sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		ethernet-switch@0 {
+			compatible = "vitesse,vsc7395";
+			reg = <0>;
+			/* Specified for 2.5 MHz or below */
+			spi-max-frequency = <2500000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-port@0 {
+					reg = <0>;
+					label = "lan1";
+				};
+				ethernet-port@1 {
+					reg = <1>;
+					label = "lan2";
+				};
+				ethernet-port@2 {
+					reg = <2>;
+					label = "lan3";
+				};
+				ethernet-port@3 {
+					reg = <3>;
+					label = "lan4";
+				};
+				vsc: ethernet-port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			pinctrl-names = "enabled", "disabled";
+			pinctrl-0 = <&pflash_default_pins>;
+			pinctrl-1 = <&pflash_disabled_pins>;
+			/* 16MB of flash */
+			reg = <0x30000000 0x01000000>;
+
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0xfe0000 */
+				fis-index-block = <0x1fc>;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0fgrp cover line 18 used by reset button
+				 * gpio0ggrp cover line 20 used by info LED
+				 * gpio0hgrp cover line 21, 22 used by MDIO for Marvell PHY
+				 * gpio0kgrp cover line 31 used by USB LED
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0fgrp",
+						"gpio0hgrp";
+					};
+				};
+				/*
+				 * gpio0dgrp cover lines used by the SPI
+				 * to the Vitesse G5x chip.
+				 */
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						groups = "gpio1dgrp";
+					};
+				};
+				/*
+				 * These GPIO groups will be mapped in over some
+				 * of the flash pins when the flash is not in
+				 * active use.
+				 */
+				pflash_disabled_pins: pinctrl-pflash-disabled {
+					mux {
+						function = "gpio0";
+						groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
+							 "gpio0kgrp";
+					};
+				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+					};
+					/* Settings come from memory dump in PLATO */
+					conf0 {
+						pins = "V8 GMAC0 RXDV";
+						skew-delay = <0>;
+					};
+					conf1 {
+						pins = "Y7 GMAC0 RXC";
+						skew-delay = <15>;
+					};
+					conf2 {
+						pins = "T8 GMAC0 TXEN";
+						skew-delay = <7>;
+					};
+					conf3 {
+						pins = "U8 GMAC0 TXC";
+						skew-delay = <10>;
+					};
+					conf4 {
+						pins = "T10 GMAC1 RXDV";
+						skew-delay = <7>;
+					};
+					conf5 {
+						pins = "Y11 GMAC1 RXC";
+						skew-delay = <8>;
+					};
+					conf6 {
+						pins = "W11 GMAC1 TXEN";
+						skew-delay = <7>;
+					};
+					conf7 {
+						pins = "V11 GMAC1 TXC";
+						skew-delay = <5>;
+					};
+					conf8 {
+						/* The data lines all have default skew */
+						pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
+						       "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
+						       "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
+						       "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
+						       "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
+						       "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
+						       "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
+						       "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					/* Set up drive strength on GMAC0 and GMAC1 to 16 mA */
+					conf9 {
+						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+						drive-strength = <16>;
+					};
+				};
+			};
+		};
+
+		sata: sata@46000000 {
+			cortina,gemini-ata-muxmode = <0>;
+			cortina,gemini-enable-sata-bridge;
+			status = "okay";
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				phy-mode = "rgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+
+		ide@63000000 {
+			status = "okay";
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini/gemini-ssi1328.dts b/arch/arm/boot/dts/gemini/gemini-ssi1328.dts
new file mode 100644
index 000000000000..42e85f07cf76
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-ssi1328.dts
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
+ * Device Tree file for SSI 1328
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+
+/ {
+	model = "SSI 1328";
+	compatible = "ssi,1328", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 initrd=0x900000,9M";
+		stdout-path = &uart0;
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* LAN Marvell 88E1118 */
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+		/* WAN ICPlus IP101A */
+		phy1: ethernet-phy@2 {
+			reg = <2>;
+			device_type = "ethernet-phy";
+		};
+	};
+};
+
+&ethernet {
+	status = "okay";
+	ethernet-port@0 {
+		phy-mode = "rgmii";
+		phy-handle = <&phy0>;
+	};
+	ethernet-port@1 {
+		phy-mode = "rgmii";
+		phy-handle = <&phy1>;
+	};
+};
+
+&flash {
+	status = "okay";
+	/* 32MB of flash */
+	reg = <0x30000000 0x03200000>;
+
+	pinctrl-names = "enabled", "disabled";
+	pinctrl-0 = <&pflash_default_pins>;
+	pinctrl-1 = <&pflash_disabled_pins>;
+
+	partitions {
+		compatible = "redboot-fis";
+		/* Eraseblock at 0xfe0000 */
+		fis-index-block = <0x7F>;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_default_pins>;
+};
+
+&ide0 {
+	status = "okay";
+};
+
+&ide1 {
+	status = "okay";
+};
+
+&sata {
+	cortina,gemini-ata-muxmode = <0>;
+	cortina,gemini-enable-sata-bridge;
+	status = "okay";
+};
+
+&syscon {
+	pinctrl {
+		/*
+		 * gpio0agrp cover line 0-4
+		 * gpio0bgrp cover line 5
+		 */
+		gpio0_default_pins: pinctrl-gpio0 {
+			mux {
+				function = "gpio0";
+				groups = "gpio0agrp", "gpio0bgrp";
+			};
+		};
+		pflash_disabled_pins: pinctrl-pflash-disabled {
+			mux {
+				function = "gpio0";
+				groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
+					 "gpio0kgrp";
+			};
+		};
+		pinctrl-gmii {
+			/* This platform use both the ethernet ports */
+			mux {
+				function = "gmii";
+				groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+			};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/gemini/gemini-wbd111.dts b/arch/arm/boot/dts/gemini/gemini-wbd111.dts
new file mode 100644
index 000000000000..6a0c89e0c918
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-wbd111.dts
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Wiliboard WBD-111
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Wiliboard WBD-111";
+	compatible = "wiligear,wiliboard-wbd111", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			/* Conflict with ICE */
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-red-l3 {
+			label = "wbd111:red:L3";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-green-l4 {
+			label = "wbd111:green:L4";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-red-l4 {
+			label = "wbd111:red:L4";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-greeb-l3 {
+			label = "wbd111:green:L3";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 8MB of flash */
+			reg = <0x30000000 0x00800000>;
+
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0x7e0000 */
+				fis-index-block = <0x3f>;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0agrp cover line 0-4
+				 * gpio0bgrp cover line 5
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0agrp",
+						"gpio0bgrp";
+					};
+				};
+			};
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini/gemini-wbd222.dts b/arch/arm/boot/dts/gemini/gemini-wbd222.dts
new file mode 100644
index 000000000000..d8b34ebad4b0
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-wbd222.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Wiliboard WBD-222
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Wiliboard WBD-222";
+	compatible = "wiligear,wiliboard-wbd222", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			/* Conflict with ICE */
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-red-l3 {
+			label = "wbd111:red:L3";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-green-l4 {
+			label = "wbd111:green:L4";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-red-l4 {
+			label = "wbd111:red:L4";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-green-l3 {
+			label = "wbd111:green:L3";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+
+		phy1: ethernet-phy@3 {
+			reg = <3>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 8MB of flash */
+			reg = <0x30000000 0x00800000>;
+
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0x7e0000 */
+				fis-index-block = <0x3f>;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0agrp cover line 0-4
+				 * gpio0bgrp cover line 5
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0agrp",
+						"gpio0bgrp";
+					};
+				};
+				pinctrl-gmii {
+					/* This platform use both the ethernet ports */
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+					};
+				};
+			};
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy1>;
+			};
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini/gemini.dtsi b/arch/arm/boot/dts/gemini/gemini.dtsi
new file mode 100644
index 000000000000..befe322bd7de
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini.dtsi
@@ -0,0 +1,475 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Cortina systems Gemini SoC
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/cortina,gemini-clock.h>
+#include <dt-bindings/reset/cortina,gemini-reset.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+		interrupt-parent = <&intcon>;
+
+		flash: flash@30000000 {
+			compatible = "cortina,gemini-flash", "cfi-flash";
+			syscon = <&syscon>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pflash_default_pins>;
+			bank-width = <2>;
+			status = "disabled";
+		};
+
+		syscon: syscon@40000000 {
+			compatible = "cortina,gemini-syscon",
+				     "syscon", "simple-mfd";
+			reg = <0x40000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+
+			syscon-reboot {
+				compatible = "syscon-reboot";
+				regmap = <&syscon>;
+				/* GLOBAL_RESET register */
+				offset = <0x0c>;
+				/* RESET_GLOBAL | RESET_CPU1 */
+				mask = <0xC0000000>;
+			};
+
+			pinctrl {
+				compatible = "cortina,gemini-pinctrl";
+				regmap = <&syscon>;
+				/* Hog the DRAM pins */
+				pinctrl-names = "default";
+				pinctrl-0 = <&dram_default_pins>, <&system_default_pins>,
+					    <&vcontrol_default_pins>;
+
+				dram_default_pins: pinctrl-dram {
+					mux {
+						function = "dram";
+						groups = "dramgrp";
+					};
+				};
+				rtc_default_pins: pinctrl-rtc {
+					mux {
+						function = "rtc";
+						groups = "rtcgrp";
+					};
+				};
+				power_default_pins: pinctrl-power {
+					mux {
+						function = "power";
+						groups = "powergrp";
+					};
+				};
+				cir_default_pins: pinctrl-cir {
+					mux {
+						function = "cir";
+						groups = "cirgrp";
+					};
+				};
+				system_default_pins: pinctrl-system {
+					mux {
+						function = "system";
+						groups = "systemgrp";
+					};
+				};
+				vcontrol_default_pins: pinctrl-vcontrol {
+					mux {
+						function = "vcontrol";
+						groups = "vcontrolgrp";
+					};
+				};
+				ice_default_pins: pinctrl-ice {
+					mux {
+						function = "ice";
+						groups = "icegrp";
+					};
+				};
+				uart_default_pins: pinctrl-uart {
+					mux {
+						function = "uart";
+						groups = "uartrxtxgrp";
+					};
+				};
+				pflash_default_pins: pinctrl-pflash {
+					mux {
+						function = "pflash";
+						groups = "pflashgrp";
+					};
+				};
+				usb_default_pins: pinctrl-usb {
+					mux {
+						function = "usb";
+						groups = "usbgrp";
+					};
+				};
+				gmii_default_pins: pinctrl-gmii {
+					/*
+					 * Only activate GMAC0 by default since
+					 * GMAC1 will overlap with 8 GPIO lines
+					 * gpio2a, gpio2b. Overlay groups with
+					 * "gmii_gmac0_grp", "gmii_gmac1_grp" for
+					 * both ethernet interfaces.
+					 */
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp";
+					};
+				};
+				pci_default_pins: pinctrl-pci {
+					mux {
+						function = "pci";
+						groups = "pcigrp";
+					};
+				};
+				sata_default_pins: pinctrl-sata {
+					mux {
+						function = "sata";
+						groups = "satagrp";
+					};
+				};
+				/* Activate both groups of pins for this state */
+				sata_and_ide_pins: pinctrl-sata-ide {
+					mux0 {
+						function = "sata";
+						groups = "satagrp";
+					};
+					mux1 {
+						function = "ide";
+						groups = "idegrp";
+					};
+				};
+				tvc_default_pins: pinctrl-tvc {
+					mux {
+						function = "tvc";
+						groups = "tvcgrp";
+					};
+				};
+			};
+		};
+
+		watchdog@41000000 {
+			compatible = "cortina,gemini-watchdog", "faraday,ftwdt010";
+			reg = <0x41000000 0x1000>;
+			interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_WDOG>;
+			clocks = <&syscon GEMINI_CLK_APB>;
+			clock-names = "PCLK";
+		};
+
+		uart0: serial@42000000 {
+			compatible = "ns16550a";
+			reg = <0x42000000 0x100>;
+			resets = <&syscon GEMINI_RESET_UART>;
+			clocks = <&syscon GEMINI_CLK_UART>;
+			interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart_default_pins>;
+			reg-shift = <2>;
+		};
+
+		timer@43000000 {
+			compatible = "faraday,fttmr010";
+			reg = <0x43000000 0x1000>;
+			interrupt-parent = <&intcon>;
+			interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */
+				     <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */
+				     <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */
+			resets = <&syscon GEMINI_RESET_TIMER>;
+			/* APB clock or RTC clock */
+			clocks = <&syscon GEMINI_CLK_APB>, <&syscon GEMINI_CLK_RTC>;
+			clock-names = "PCLK", "EXTCLK";
+			syscon = <&syscon>;
+		};
+
+		rtc@45000000 {
+			compatible = "cortina,gemini-rtc", "faraday,ftrtc010";
+			reg = <0x45000000 0x100>;
+			interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_RTC>;
+			clocks = <&syscon GEMINI_CLK_APB>, <&syscon GEMINI_CLK_RTC>;
+			clock-names = "PCLK", "EXTCLK";
+			pinctrl-names = "default";
+			pinctrl-0 = <&rtc_default_pins>;
+		};
+
+		sata: sata@46000000 {
+			compatible = "cortina,gemini-sata-bridge";
+			reg = <0x46000000 0x100>;
+			resets = <&syscon GEMINI_RESET_SATA0>,
+				 <&syscon GEMINI_RESET_SATA1>;
+			reset-names = "sata0", "sata1";
+			clocks = <&syscon GEMINI_CLK_GATE_SATA0>,
+				 <&syscon GEMINI_CLK_GATE_SATA1>;
+			clock-names = "SATA0_PCLK", "SATA1_PCLK";
+			/*
+			 * This defines the special "ide" state that needs
+			 * to be explicitly enabled to enable the IDE pins,
+			 * as these pins are normally used for other things.
+			 */
+			pinctrl-names = "default", "ide";
+			pinctrl-0 = <&sata_default_pins>;
+			pinctrl-1 = <&sata_and_ide_pins>;
+			syscon = <&syscon>;
+			status = "disabled";
+		};
+
+		intcon: interrupt-controller@48000000 {
+			compatible = "faraday,ftintc010";
+			reg = <0x48000000 0x1000>;
+			resets = <&syscon GEMINI_RESET_INTCON0>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		power-controller@4b000000 {
+			compatible = "cortina,gemini-power-controller";
+			reg = <0x4b000000 0x100>;
+			interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&power_default_pins>;
+		};
+
+		gpio0: gpio@4d000000 {
+			compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
+			reg = <0x4d000000 0x100>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_GPIO0>;
+			clocks = <&syscon GEMINI_CLK_APB>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@4e000000 {
+			compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
+			reg = <0x4e000000 0x100>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_GPIO1>;
+			clocks = <&syscon GEMINI_CLK_APB>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@4f000000 {
+			compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
+			reg = <0x4f000000 0x100>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_GPIO2>;
+			clocks = <&syscon GEMINI_CLK_APB>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pci@50000000 {
+			compatible = "cortina,gemini-pci", "faraday,ftpci100";
+			/*
+			 * The first 256 bytes in the IO range is actually used
+			 * to configure the host bridge.
+			 */
+			reg = <0x50000000 0x100>;
+			resets = <&syscon GEMINI_RESET_PCI>;
+			clocks = <&syscon GEMINI_CLK_GATE_PCI>, <&syscon GEMINI_CLK_PCI>;
+			clock-names = "PCLK", "PCICLK";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pci_default_pins>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+				<0x4800 0 0 2 &pci_intc 1>,
+				<0x4800 0 0 3 &pci_intc 2>,
+				<0x4800 0 0 4 &pci_intc 3>,
+				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+				<0x5000 0 0 2 &pci_intc 2>,
+				<0x5000 0 0 3 &pci_intc 3>,
+				<0x5000 0 0 4 &pci_intc 0>,
+				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+				<0x5800 0 0 2 &pci_intc 3>,
+				<0x5800 0 0 3 &pci_intc 0>,
+				<0x5800 0 0 4 &pci_intc 1>,
+				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+				<0x6000 0 0 2 &pci_intc 0>,
+				<0x6000 0 0 3 &pci_intc 1>,
+				<0x6000 0 0 4 &pci_intc 2>;
+
+			bus-range = <0x00 0xff>;
+			/* PCI ranges mappings */
+			ranges =
+			/* 1MiB I/O space 0x50000000-0x500fffff */
+			<0x01000000 0 0          0x50000000 0 0x00100000>,
+			/* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */
+			<0x02000000 0 0x58000000 0x58000000 0 0x08000000>;
+
+			/* DMA ranges */
+			dma-ranges =
+			/* 128MiB at 0x00000000-0x07ffffff */
+			<0x02000000 0 0x00000000 0x00000000 0 0x08000000>,
+			/* 64MiB at 0x00000000-0x03ffffff */
+			<0x02000000 0 0x00000000 0x00000000 0 0x04000000>,
+			/* 64MiB at 0x00000000-0x03ffffff */
+			<0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+			/*
+			 * This PCI host bridge variant has a cascaded interrupt
+			 * controller embedded in the host bridge.
+			 */
+			pci_intc: interrupt-controller {
+				interrupt-parent = <&intcon>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		ethernet: ethernet@60000000 {
+			compatible = "cortina,gemini-ethernet";
+			reg = <0x60000000 0x4000>, /* Global registers, queue */
+			      <0x60004000 0x2000>, /* V-bit */
+			      <0x60006000 0x2000>; /* A-bit */
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmii_default_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gmac0: ethernet-port@0 {
+				compatible = "cortina,gemini-ethernet-port";
+				reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
+				      <0x6000a000 0x2000>; /* Port 0 GMAC */
+				interrupt-parent = <&intcon>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&syscon GEMINI_RESET_GMAC0>;
+				clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
+				clock-names = "PCLK";
+			};
+
+			gmac1: ethernet-port@1 {
+				compatible = "cortina,gemini-ethernet-port";
+				reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
+				      <0x6000e000 0x2000>; /* Port 1 GMAC */
+				interrupt-parent = <&intcon>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&syscon GEMINI_RESET_GMAC1>;
+				clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
+				clock-names = "PCLK";
+			};
+		};
+
+		crypto: crypto@62000000 {
+			compatible = "cortina,sl3516-crypto";
+			reg = <0x62000000 0x10000>;
+			interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+			resets = <&syscon GEMINI_RESET_SECURITY>;
+			clocks = <&syscon GEMINI_CLK_GATE_SECURITY>;
+		};
+
+		ide0: ide@63000000 {
+			compatible = "cortina,gemini-pata", "faraday,ftide010";
+			reg = <0x63000000 0x1000>;
+			interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+			resets = <&syscon GEMINI_RESET_IDE>;
+			clocks = <&syscon GEMINI_CLK_GATE_IDE>;
+			clock-names = "PCLK";
+			sata = <&sata>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ide1: ide@63400000 {
+			compatible = "cortina,gemini-pata", "faraday,ftide010";
+			reg = <0x63400000 0x1000>;
+			interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+			resets = <&syscon GEMINI_RESET_IDE>;
+			clocks = <&syscon GEMINI_CLK_GATE_IDE>;
+			clock-names = "PCLK";
+			sata = <&sata>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		dma-controller@67000000 {
+			compatible = "faraday,ftdma020", "arm,pl080", "arm,primecell";
+			/* Faraday Technology FTDMAC020 variant */
+			arm,primecell-periphid = <0x0003b080>;
+			reg = <0x67000000 0x1000>;
+			interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+			resets = <&syscon GEMINI_RESET_DMAC>;
+			clocks = <&syscon GEMINI_CLK_AHB>;
+			clock-names = "apb_pclk";
+			/* Bus interface AHB1 (AHB0) is totally tilted */
+			lli-bus-interface-ahb2;
+			mem-bus-interface-ahb2;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			#dma-cells = <2>;
+		};
+
+		display-controller@6a000000 {
+			compatible = "cortina,gemini-tvc", "faraday,tve200";
+			reg = <0x6a000000 0x1000>;
+			interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+			resets = <&syscon GEMINI_RESET_TVC>;
+			clocks = <&syscon GEMINI_CLK_GATE_TVC>,
+				 <&syscon GEMINI_CLK_TVC>;
+			clock-names = "PCLK", "TVE";
+			pinctrl-names = "default";
+			pinctrl-0 = <&tvc_default_pins>;
+			status = "disabled";
+		};
+
+		usb0: usb@68000000 {
+			compatible = "cortina,gemini-usb", "faraday,fotg200";
+			reg = <0x68000000 0x1000>;
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_USB0>;
+			clocks = <&syscon GEMINI_CLK_GATE_USB0>;
+			clock-names = "PCLK";
+			/*
+			 * This will claim pins for USB0 and USB1 at the same
+			 * time as they are using some common pins. If you for
+			 * some reason have a system using USB1 at 96000000 but
+			 * NOT using USB0 at 68000000 you wll have to add the
+			 * usb_default_pins to the USB controller at 96000000
+			 * in your .dts for the board.
+			 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_default_pins>;
+			/* Default to host mode */
+			dr_mode = "host";
+			syscon = <&syscon>;
+			status = "disabled";
+		};
+
+		usb1: usb@69000000 {
+			compatible = "cortina,gemini-usb", "faraday,fotg200";
+			reg = <0x69000000 0x1000>;
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_USB1>;
+			clocks = <&syscon GEMINI_CLK_GATE_USB1>;
+			clock-names = "PCLK";
+			syscon = <&syscon>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hi3519-demb.dts b/arch/arm/boot/dts/hi3519-demb.dts
deleted file mode 100644
index 6991ab694c9c..000000000000
--- a/arch/arm/boot/dts/hi3519-demb.dts
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/dts-v1/;
-#include "hi3519.dtsi"
-
-/ {
-	model = "HiSilicon HI3519 DEMO Board";
-	compatible = "hisilicon,hi3519";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&dual_timer0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/hi3519.dtsi b/arch/arm/boot/dts/hi3519.dtsi
deleted file mode 100644
index 5729ecfcdc8b..000000000000
--- a/arch/arm/boot/dts/hi3519.dtsi
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#include <dt-bindings/clock/hi3519-clock.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	chosen { };
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0>;
-		};
-	};
-
-	gic: interrupt-controller@10300000 {
-		compatible = "arm,cortex-a7-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x10301000 0x1000>, <0x10302000 0x1000>;
-	};
-
-	clk_3m: clk_3m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <3000000>;
-	};
-
-	crg: clock-reset-controller@12010000 {
-		compatible = "hisilicon,hi3519-crg";
-		#clock-cells = <1>;
-		#reset-cells = <2>;
-		reg = <0x12010000 0x10000>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		uart0: serial@12100000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x12100000 0x1000>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_UART0_CLK>;
-			clock-names = "apb_pclk";
-			status = "disable";
-		};
-
-		uart1: serial@12101000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x12101000 0x1000>;
-			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_UART1_CLK>;
-			clock-names = "apb_pclk";
-			status = "disable";
-		};
-
-		uart2: serial@12102000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x12102000 0x1000>;
-			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_UART2_CLK>;
-			clock-names = "apb_pclk";
-			status = "disable";
-		};
-
-		uart3: serial@12103000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x12103000 0x1000>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_UART3_CLK>;
-			clock-names = "apb_pclk";
-			status = "disable";
-		};
-
-		uart4: serial@12104000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x12104000 0x1000>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_UART4_CLK>;
-			clock-names = "apb_pclk";
-			status = "disable";
-		};
-
-		dual_timer0: timer@12000000 {
-			compatible = "arm,sp804", "arm,primecell";
-			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x12000000 0x1000>;
-			clocks = <&clk_3m>;
-			clock-names = "apb_pclk";
-			status = "disable";
-		};
-
-		dual_timer1: timer@12001000 {
-			compatible = "arm,sp804", "arm,primecell";
-			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x12001000 0x1000>;
-			clocks = <&clk_3m>;
-			clock-names = "apb_pclk";
-			status = "disable";
-		};
-
-		dual_timer2: timer@12002000 {
-			compatible = "arm,sp804", "arm,primecell";
-			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x12002000 0x1000>;
-			clocks = <&clk_3m>;
-			clock-names = "apb_pclk";
-			status = "disable";
-		};
-
-		spi_bus0: spi@12120000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x12120000 0x1000>;
-			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_SPI0_CLK>;
-			clock-names = "apb_pclk";
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disable";
-		};
-
-		spi_bus1: spi@12121000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x12121000 0x1000>;
-			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_SPI1_CLK>;
-			clock-names = "apb_pclk";
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disable";
-		};
-
-		spi_bus2: spi@12122000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x12122000 0x1000>;
-			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_SPI2_CLK>;
-			clock-names = "apb_pclk";
-			num-cs = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disable";
-		};
-
-		sysctrl: system-controller@12020000 {
-			compatible = "hisilicon,hi3519-sysctrl", "syscon";
-			reg = <0x12020000 0x1000>;
-		};
-
-		reboot {
-			compatible = "syscon-reboot";
-			regmap = <&sysctrl>;
-			offset = <0x4>;
-			mask = <0xdeadbeef>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
deleted file mode 100644
index ed14aeac0566..000000000000
--- a/arch/arm/boot/dts/highbank.dts
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * Copyright 2011-2012 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/dts-v1/;
-
-/* First 4KB has pen for secondary cores. */
-/memreserve/ 0x00000000 0x0001000;
-
-/ {
-	model = "Calxeda Highbank";
-	compatible = "calxeda,highbank";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	clock-ranges;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@900 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0x900>;
-			next-level-cache = <&L2>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-			operating-points = <
-				/* kHz    ignored */
-				 1300000  1000000
-				 1200000  1000000
-				 1100000  1000000
-				  800000  1000000
-				  400000  1000000
-				  200000  1000000
-			>;
-			clock-latency = <100000>;
-		};
-
-		cpu@901 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0x901>;
-			next-level-cache = <&L2>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-
-		cpu@902 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0x902>;
-			next-level-cache = <&L2>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-
-		cpu@903 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0x903>;
-			next-level-cache = <&L2>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-	};
-
-	memory {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x00000000 0xff900000>;
-	};
-
-	soc {
-		ranges = <0x00000000 0x00000000 0xffffffff>;
-
-		memory-controller@fff00000 {
-			compatible = "calxeda,hb-ddr-ctrl";
-			reg = <0xfff00000 0x1000>;
-			interrupts = <0 91 4>;
-		};
-
-		timer@fff10600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0xfff10600 0x20>;
-			interrupts = <1 13 0xf01>;
-			clocks = <&a9periphclk>;
-		};
-
-		watchdog@fff10620 {
-			compatible = "arm,cortex-a9-twd-wdt";
-			reg = <0xfff10620 0x20>;
-			interrupts = <1 14 0xf01>;
-			clocks = <&a9periphclk>;
-		};
-
-		intc: interrupt-controller@fff11000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#size-cells = <0>;
-			#address-cells = <1>;
-			interrupt-controller;
-			reg = <0xfff11000 0x1000>,
-			      <0xfff10100 0x100>;
-		};
-
-		L2: l2-cache {
-			compatible = "arm,pl310-cache";
-			reg = <0xfff12000 0x1000>;
-			interrupts = <0 70 4>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		pmu {
-			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 76 4  0 75 4  0 74 4  0 73 4>;
-		};
-
-
-		sregs@fff3c200 {
-			compatible = "calxeda,hb-sregs-l2-ecc";
-			reg = <0xfff3c200 0x100>;
-			interrupts = <0 71 4  0 72 4>;
-		};
-
-	};
-};
-
-/include/ "ecx-common.dtsi"
diff --git a/arch/arm/boot/dts/hip01-ca9x2.dts b/arch/arm/boot/dts/hip01-ca9x2.dts
deleted file mode 100644
index eca5e42770fe..000000000000
--- a/arch/arm/boot/dts/hip01-ca9x2.dts
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Hisilicon Ltd. HiP01 SoC
- *
- * Copyright (C) 2014 Hisilicon Ltd.
- * Copyright (C) 2014 Huawei Ltd.
- *
- * Author: Wang Long <long.wanglong@huawei.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-/* First 8KB reserved for secondary core boot */
-/memreserve/ 0x80000000 0x00002000;
-
-#include "hip01.dtsi"
-
-/ {
-	model = "Hisilicon HIP01 Development Board";
-	compatible = "hisilicon,hip01-ca9x2", "hisilicon,hip01";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "hisilicon,hip01-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi
deleted file mode 100644
index 9d5fd5cfefa6..000000000000
--- a/arch/arm/boot/dts/hip01.dtsi
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Hisilicon Ltd. HiP01 SoC
- *
- * Copyright (c) 2014 Hisilicon Ltd.
- * Copyright (c) 2014 Huawei Ltd.
- *
- * Author: Wang Long <long.wanglong@huawei.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/ {
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	gic: interrupt-controller@1e001000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x1a001000 0x1000>, <0x1a000100 0x1000>;
-	};
-
-	hisi_refclk144mhz: refclk144mkhz {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <144000000>;
-		clock-output-names = "hisi:refclk144khz";
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges = <0 0x10000000 0x20000000>;
-
-		amba {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges;
-
-			uart0: uart@10001000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x10001000 0x1000>;
-				clocks = <&hisi_refclk144mhz>;
-				clock-names = "apb_pclk";
-				reg-shift = <2>;
-				interrupts = <0 32 4>;
-				status = "disabled";
-			};
-
-			uart1: uart@10002000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x10002000 0x1000>;
-				clocks = <&hisi_refclk144mhz>;
-				clock-names = "apb_pclk";
-				reg-shift = <2>;
-				interrupts = <0 33 4>;
-				status = "disabled";
-			};
-
-			uart2: uart@10003000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x10003000 0x1000>;
-				clocks = <&hisi_refclk144mhz>;
-				clock-names = "apb_pclk";
-				reg-shift = <2>;
-				interrupts = <0 34 4>;
-				status = "disabled";
-			};
-
-			uart3: uart@10006000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x10006000 0x1000>;
-				clocks = <&hisi_refclk144mhz>;
-				clock-names = "apb_pclk";
-				reg-shift = <2>;
-				interrupts = <0 4 4>;
-				status = "disabled";
-			};
-		};
-
-		system-controller@10000000 {
-			compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";
-			reg = <0x10000000 0x1000>;
-			reboot-offset = <0x4>;
-		};
-
-		global_timer@0a000200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x0a000200 0x100>;
-			interrupts = <1 11 0xf04>;
-			clocks = <&hisi_refclk144mhz>;
-		};
-
-		local_timer@0a000600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x0a000600 0x100>;
-			interrupts = <1 13 0xf04>;
-			clocks = <&hisi_refclk144mhz>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts
deleted file mode 100644
index 40a9e33c2654..000000000000
--- a/arch/arm/boot/dts/hip04-d01.dts
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- *  Copyright (C) 2013-2014 Linaro Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@linaro.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "hip04.dtsi"
-
-/ {
-	/* memory bus is 64-bit */
-	#address-cells = <2>;
-	#size-cells = <2>;
-	model = "Hisilicon D01 Development Board";
-	compatible = "hisilicon,hip04-d01";
-
-	memory@00000000,10000000 {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000 0x00000000 0xc0000000>,
-		      <0x00000004 0xc0000000 0x00000003 0x40000000>;
-	};
-
-	soc {
-		uart0: uart@4007000 {
-			status = "ok";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/hisilicon/Makefile b/arch/arm/boot/dts/hisilicon/Makefile
new file mode 100644
index 000000000000..5ce0512c0010
--- /dev/null
+++ b/arch/arm/boot/dts/hisilicon/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_HI3xxx) += \
+	hi3620-hi4511.dtb
+dtb-$(CONFIG_ARCH_HIP01) += \
+	hip01-ca9x2.dtb
+dtb-$(CONFIG_ARCH_HIP04) += \
+	hip04-d01.dtb
+dtb-$(CONFIG_ARCH_HISI) += \
+	hi3519-demb.dtb
+dtb-$(CONFIG_ARCH_HIX5HD2) += \
+	hisi-x5hd2-dkb.dtb
+dtb-$(CONFIG_ARCH_SD5203) += \
+	sd5203.dtb
diff --git a/arch/arm/boot/dts/hisilicon/hi3519-demb.dts b/arch/arm/boot/dts/hisilicon/hi3519-demb.dts
new file mode 100644
index 000000000000..f473fa22e9ce
--- /dev/null
+++ b/arch/arm/boot/dts/hisilicon/hi3519-demb.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
+ */
+
+/dts-v1/;
+#include "hi3519.dtsi"
+
+/ {
+	model = "HiSilicon HI3519 DEMO Board";
+	compatible = "hisilicon,hi3519";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&dual_timer0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/hisilicon/hi3519.dtsi b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
new file mode 100644
index 000000000000..a42b71cdc5d7
--- /dev/null
+++ b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
+ */
+
+#include <dt-bindings/clock/hi3519-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+		};
+	};
+
+	gic: interrupt-controller@10300000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x10301000 0x1000>, <0x10302000 0x1000>;
+	};
+
+	clk_3m: clk_3m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <3000000>;
+	};
+
+	crg: clock-reset-controller@12010000 {
+		compatible = "hisilicon,hi3519-crg";
+		#clock-cells = <1>;
+		#reset-cells = <2>;
+		reg = <0x12010000 0x10000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		uart0: serial@12100000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12100000 0x1000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART0_CLK>, <&crg HI3519_UART0_CLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart1: serial@12101000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12101000 0x1000>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART1_CLK>, <&crg HI3519_UART1_CLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: serial@12102000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12102000 0x1000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART2_CLK>, <&crg HI3519_UART2_CLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart3: serial@12103000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12103000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART3_CLK>, <&crg HI3519_UART3_CLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart4: serial@12104000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12104000 0x1000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART4_CLK>, <&crg HI3519_UART4_CLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		dual_timer0: timer@12000000 {
+			compatible = "arm,sp804", "arm,primecell";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x12000000 0x1000>;
+			clocks = <&clk_3m>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		dual_timer1: timer@12001000 {
+			compatible = "arm,sp804", "arm,primecell";
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x12001000 0x1000>;
+			clocks = <&clk_3m>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		dual_timer2: timer@12002000 {
+			compatible = "arm,sp804", "arm,primecell";
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x12002000 0x1000>;
+			clocks = <&clk_3m>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		spi_bus0: spi@12120000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x12120000 0x1000>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_SPI0_CLK>, <&crg HI3519_SPI0_CLK>;
+			clock-names = "sspclk", "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi_bus1: spi@12121000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x12121000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_SPI1_CLK>, <&crg HI3519_SPI1_CLK>;
+			clock-names = "sspclk", "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi_bus2: spi@12122000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x12122000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_SPI2_CLK>, <&crg HI3519_SPI2_CLK>;
+			clock-names = "sspclk", "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sysctrl: system-controller@12020000 {
+			compatible = "hisilicon,hi3519-sysctrl", "syscon";
+			reg = <0x12020000 0x1000>;
+		};
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&sysctrl>;
+			offset = <0x4>;
+			mask = <0xdeadbeef>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hisilicon/hi3620-hi4511.dts
index a579fbf13b5f..f1c816a1d7cf 100644
--- a/arch/arm/boot/dts/hi3620-hi4511.dts
+++ b/arch/arm/boot/dts/hisilicon/hi3620-hi4511.dts
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  *  Copyright (C) 2012-2013 Linaro Ltd.
  *  Author: Haojian Zhuang <haojian.zhuang@linaro.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
  */
 
 /dts-v1/;
@@ -20,168 +17,168 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x20000000>;
 	};
 
-	amba {
+	amba-bus {
 		dual_timer0: dual_timer@800000 {
-			status = "ok";
+			status = "okay";
 		};
 
-		uart0: uart@b00000 {	/* console */
-			pinctrl-names = "default", "idle";
+		uart0: serial@b00000 {	/* console */
+			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
 			pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
-		uart1: uart@b01000 { /* modem */
-			pinctrl-names = "default", "idle";
+		uart1: serial@b01000 { /* modem */
+			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
 			pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
-		uart2: uart@b02000 { /* audience */
-			pinctrl-names = "default", "idle";
+		uart2: serial@b02000 { /* audience */
+			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
 			pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
-		uart3: uart@b03000 {
-			pinctrl-names = "default", "idle";
+		uart3: serial@b03000 {
+			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
 			pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
-		uart4: uart@b04000 {
-			pinctrl-names = "default", "idle";
+		uart4: serial@b04000 {
+			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
 			pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>;
-			status = "ok";
+			status = "okay";
 		};
 
 		pmx0: pinmux@803000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&board_pmx_pins>;
 
-			board_pmx_pins: board_pmx_pins {
+			board_pmx_pins: board-pins {
 				pinctrl-single,pins = <
 					0x008 0x0	/* GPIO -- eFUSE_DOUT */
 					0x100 0x0	/* USIM_CLK & USIM_DATA (IOMG63) */
 				>;
 			};
-			uart0_pmx_func: uart0_pmx_func {
+			uart0_pmx_func: uart0-pins {
 				pinctrl-single,pins = <
 					0x0f0 0x0
 					0x0f4 0x0	/* UART0_RX & UART0_TX */
 				>;
 			};
-			uart0_pmx_idle: uart0_pmx_idle {
+			uart0_pmx_idle: uart0-idle-pins {
 				pinctrl-single,pins = <
 					/*0x0f0 0x1*/	/* UART0_CTS & UART0_RTS */
 					0x0f4 0x1	/* UART0_RX & UART0_TX */
 				>;
 			};
-			uart1_pmx_func: uart1_pmx_func {
+			uart1_pmx_func: uart1-pins {
 				pinctrl-single,pins = <
 					0x0f8 0x0	/* UART1_CTS & UART1_RTS (IOMG61) */
 					0x0fc 0x0	/* UART1_RX & UART1_TX (IOMG62) */
 				>;
 			};
-			uart1_pmx_idle: uart1_pmx_idle {
+			uart1_pmx_idle: uart1-idle-pins {
 				pinctrl-single,pins = <
 					0x0f8 0x1	/* GPIO (IOMG61) */
 					0x0fc 0x1	/* GPIO (IOMG62) */
 				>;
 			};
-			uart2_pmx_func: uart2_pmx_func {
+			uart2_pmx_func: uart2-pins {
 				pinctrl-single,pins = <
 					0x104 0x2	/* UART2_RXD (IOMG96) */
 					0x108 0x2	/* UART2_TXD (IOMG64) */
 				>;
 			};
-			uart2_pmx_idle: uart2_pmx_idle {
+			uart2_pmx_idle: uart2-idle-pins {
 				pinctrl-single,pins = <
 					0x104 0x1	/* GPIO (IOMG96) */
 					0x108 0x1	/* GPIO (IOMG64) */
 				>;
 			};
-			uart3_pmx_func: uart3_pmx_func {
+			uart3_pmx_func: uart3-pins {
 				pinctrl-single,pins = <
 					0x160 0x2	/* UART3_CTS & UART3_RTS (IOMG85) */
 					0x164 0x2	/* UART3_RXD & UART3_TXD (IOMG86) */
 				>;
 			};
-			uart3_pmx_idle: uart3_pmx_idle {
+			uart3_pmx_idle: uart3-idle-pins {
 				pinctrl-single,pins = <
 					0x160 0x1	/* GPIO (IOMG85) */
 					0x164 0x1	/* GPIO (IOMG86) */
 				>;
 			};
-			uart4_pmx_func: uart4_pmx_func {
+			uart4_pmx_func: uart4-pins {
 				pinctrl-single,pins = <
 					0x168 0x0	/* UART4_CTS & UART4_RTS (IOMG87) */
 					0x16c 0x0	/* UART4_RXD (IOMG88) */
 					0x170 0x0	/* UART4_TXD (IOMG93) */
 				>;
 			};
-			uart4_pmx_idle: uart4_pmx_idle {
+			uart4_pmx_idle: uart4-idle-pins {
 				pinctrl-single,pins = <
 					0x168 0x1	/* GPIO (IOMG87) */
 					0x16c 0x1	/* GPIO (IOMG88) */
 					0x170 0x1	/* GPIO (IOMG93) */
 				>;
 			};
-			i2c0_pmx_func: i2c0_pmx_func {
+			i2c0_pmx_func: i2c0-pins {
 				pinctrl-single,pins = <
 					0x0b4 0x0	/* I2C0_SCL & I2C0_SDA (IOMG45) */
 				>;
 			};
-			i2c0_pmx_idle: i2c0_pmx_idle {
+			i2c0_pmx_idle: i2c0-idle-pins {
 				pinctrl-single,pins = <
 					0x0b4 0x1	/* GPIO (IOMG45) */
 				>;
 			};
-			i2c1_pmx_func: i2c1_pmx_func {
+			i2c1_pmx_func: i2c1-pins {
 				pinctrl-single,pins = <
 					0x0b8 0x0	/* I2C1_SCL & I2C1_SDA (IOMG46) */
 				>;
 			};
-			i2c1_pmx_idle: i2c1_pmx_idle {
+			i2c1_pmx_idle: i2c1-idle-pins {
 				pinctrl-single,pins = <
 					0x0b8 0x1	/* GPIO (IOMG46) */
 				>;
 			};
-			i2c2_pmx_func: i2c2_pmx_func {
+			i2c2_pmx_func: i2c2-pins {
 				pinctrl-single,pins = <
 					0x068 0x0	/* I2C2_SCL (IOMG26) */
 					0x06c 0x0	/* I2C2_SDA (IOMG27) */
 				>;
 			};
-			i2c2_pmx_idle: i2c2_pmx_idle {
+			i2c2_pmx_idle: i2c2-idle-pins {
 				pinctrl-single,pins = <
 					0x068 0x1	/* GPIO (IOMG26) */
 					0x06c 0x1	/* GPIO (IOMG27) */
 				>;
 			};
-			i2c3_pmx_func: i2c3_pmx_func {
+			i2c3_pmx_func: i2c3-pins {
 				pinctrl-single,pins = <
 					0x050 0x2	/* I2C3_SCL (IOMG20) */
 					0x054 0x2	/* I2C3_SDA (IOMG21) */
 				>;
 			};
-			i2c3_pmx_idle: i2c3_pmx_idle {
+			i2c3_pmx_idle: i2c3-idle-pins {
 				pinctrl-single,pins = <
 					0x050 0x1	/* GPIO (IOMG20) */
 					0x054 0x1	/* GPIO (IOMG21) */
 				>;
 			};
-			spi0_pmx_func: spi0_pmx_func {
+			spi0_pmx_func: spi0-pins {
 				pinctrl-single,pins = <
 					0x0d4 0x0	/* SPI0_CLK/SPI0_DI/SPI0_DO (IOMG53) */
 					0x0d8 0x0	/* SPI0_CS0 (IOMG54) */
@@ -190,7 +187,7 @@
 					0x0e4 0x0	/* SPI0_CS3 (IOMG57) */
 				>;
 			};
-			spi0_pmx_idle: spi0_pmx_idle {
+			spi0_pmx_idle: spi0-idle-pins {
 				pinctrl-single,pins = <
 					0x0d4 0x1	/* GPIO (IOMG53) */
 					0x0d8 0x1	/* GPIO (IOMG54) */
@@ -199,21 +196,21 @@
 					0x0e4 0x1	/* GPIO (IOMG57) */
 				>;
 			};
-			spi1_pmx_func: spi1_pmx_func {
+			spi1_pmx_func: spi1-pins {
 				pinctrl-single,pins = <
 					0x184 0x0	/* SPI1_CLK/SPI1_DI (IOMG98) */
 					0x0e8 0x0	/* SPI1_DO (IOMG58) */
 					0x0ec 0x0	/* SPI1_CS (IOMG95) */
 				>;
 			};
-			spi1_pmx_idle: spi1_pmx_idle {
+			spi1_pmx_idle: spi1-idle-pins {
 				pinctrl-single,pins = <
 					0x184 0x1	/* GPIO (IOMG98) */
 					0x0e8 0x1	/* GPIO (IOMG58) */
 					0x0ec 0x1	/* GPIO (IOMG95) */
 				>;
 			};
-			kpc_pmx_func: kpc_pmx_func {
+			kpc_pmx_func: kpc-pins {
 				pinctrl-single,pins = <
 					0x12c 0x0	/* KEY_IN0 (IOMG73) */
 					0x130 0x0	/* KEY_IN1 (IOMG74) */
@@ -223,7 +220,7 @@
 					0x114 0x0	/* KEY_OUT2 (IOMG67) */
 				>;
 			};
-			kpc_pmx_idle: kpc_pmx_idle {
+			kpc_pmx_idle: kpc-idle-pins {
 				pinctrl-single,pins = <
 					0x12c 0x1	/* GPIO (IOMG73) */
 					0x130 0x1	/* GPIO (IOMG74) */
@@ -233,13 +230,13 @@
 					0x114 0x1	/* GPIO (IOMG67) */
 				>;
 			};
-			gpio_key_func: gpio_key_func {
+			gpio_key_func: gpio-key-pins {
 				pinctrl-single,pins = <
 					0x10c 0x1	/* KEY_OUT0/GPIO (IOMG65) */
 					0x130 0x1	/* KEY_IN1/GPIO (IOMG74) */
 				>;
 			};
-			emmc_pmx_func: emmc_pmx_func {
+			emmc_pmx_func: emmc-pins {
 				pinctrl-single,pins = <
 					0x030 0x2	/* eMMC_CMD/eMMC_CLK (IOMG12) */
 					0x018 0x0	/* NAND_CS3_N (IOMG6) */
@@ -248,7 +245,7 @@
 					0x02c 0x2	/* eMMC_DATA[0:7] (IOMG10) */
 				>;
 			};
-			emmc_pmx_idle: emmc_pmx_idle {
+			emmc_pmx_idle: emmc-idle-pins {
 				pinctrl-single,pins = <
 					0x030 0x0	/* GPIO (IOMG12) */
 					0x018 0x1	/* GPIO (IOMG6) */
@@ -257,19 +254,19 @@
 					0x02c 0x1	/* GPIO (IOMG10) */
 				>;
 			};
-			sd_pmx_func: sd_pmx_func {
+			sd_pmx_func: sd-pins {
 				pinctrl-single,pins = <
 					0x0bc 0x0	/* SD_CLK/SD_CMD/SD_DATA0/SD_DATA1/SD_DATA2 (IOMG47) */
 					0x0c0 0x0	/* SD_DATA3 (IOMG48) */
 				>;
 			};
-			sd_pmx_idle: sd_pmx_idle {
+			sd_pmx_idle: sd-idle-pins {
 				pinctrl-single,pins = <
 					0x0bc 0x1	/* GPIO (IOMG47) */
 					0x0c0 0x1	/* GPIO (IOMG48) */
 				>;
 			};
-			nand_pmx_func: nand_pmx_func {
+			nand_pmx_func: nand-pins {
 				pinctrl-single,pins = <
 					0x00c 0x0	/* NAND_ALE/NAND_CLE/.../NAND_DATA[0:7] (IOMG3) */
 					0x010 0x0	/* NAND_CS1_N (IOMG4) */
@@ -282,7 +279,7 @@
 					0x02c 0x0	/* NAND_DATA[8:15] (IOMG10) */
 				>;
 			};
-			nand_pmx_idle: nand_pmx_idle {
+			nand_pmx_idle: nand-idle-pins {
 				pinctrl-single,pins = <
 					0x00c 0x1	/* GPIO (IOMG3) */
 					0x010 0x1	/* GPIO (IOMG4) */
@@ -295,17 +292,17 @@
 					0x02c 0x1	/* GPIO (IOMG10) */
 				>;
 			};
-			sdio_pmx_func: sdio_pmx_func {
+			sdio_pmx_func: sdio-pins {
 				pinctrl-single,pins = <
 					0x0c4 0x0	/* SDIO_CLK/SDIO_CMD/SDIO_DATA[0:3] (IOMG49) */
 				>;
 			};
-			sdio_pmx_idle: sdio_pmx_idle {
+			sdio_pmx_idle: sdio-idle-pins {
 				pinctrl-single,pins = <
 					0x0c4 0x1	/* GPIO (IOMG49) */
 				>;
 			};
-			audio_out_pmx_func: audio_out_pmx_func {
+			audio_out_pmx_func: audio-out-pins {
 				pinctrl-single,pins = <
 					0x0f0 0x1	/* GPIO (IOMG59), audio spk & earphone */
 				>;
@@ -317,7 +314,7 @@
 			pinctrl-0 = <	&board_pu_pins &board_pd_pins &board_pd_ps_pins
 					&board_np_pins &board_ps_pins &kpc_cfg_func
 					&audio_out_cfg_func>;
-			board_pu_pins: board_pu_pins {
+			board_pu_pins: board-pu-pins {
 				pinctrl-single,pins = <
 					0x014 0		/* GPIO_158 (IOCFG2) */
 					0x018 0		/* GPIO_159 (IOCFG3) */
@@ -327,7 +324,7 @@
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <1 1 0 1>;
 			};
-			board_pd_pins: board_pd_pins {
+			board_pd_pins: board-pd-pins {
 				pinctrl-single,pins = <
 					0x038 0		/* eFUSE_DOUT (IOCFG11) */
 					0x150 0		/* ISP_GPIO8 (IOCFG93) */
@@ -336,7 +333,7 @@
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			board_pd_ps_pins: board_pd_ps_pins {
+			board_pd_ps_pins: board-pd-ps-pins {
 				pinctrl-single,pins = <
 					0x2d8 0		/* CLK_OUT0 (IOCFG190) */
 					0x004 0		/* PMU_SPI_DATA (IOCFG192) */
@@ -345,21 +342,21 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			board_np_pins: board_np_pins {
+			board_np_pins: board-np-pins {
 				pinctrl-single,pins = <
 					0x24c 0		/* KEYPAD_OUT7 (IOCFG155) */
 				>;
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			board_ps_pins: board_ps_pins {
+			board_ps_pins: board-ps-pins {
 				pinctrl-single,pins = <
 					0x000 0		/* PMU_SPI_CLK (IOCFG191) */
 					0x008 0		/* PMU_SPI_CS_N (IOCFG193) */
 				>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			uart0_cfg_func: uart0_cfg_func {
+			uart0_cfg_func: uart0-cfg-pins {
 				pinctrl-single,pins = <
 					0x208 0		/* UART0_RXD (IOCFG138) */
 					0x20c 0		/* UART0_TXD (IOCFG139) */
@@ -367,7 +364,7 @@
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart0_cfg_idle: uart0_cfg_idle {
+			uart0_cfg_idle: uart0-cfg-idle-pins {
 				pinctrl-single,pins = <
 					0x208 0		/* UART0_RXD (IOCFG138) */
 					0x20c 0		/* UART0_TXD (IOCFG139) */
@@ -375,7 +372,7 @@
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart1_cfg_func: uart1_cfg_func {
+			uart1_cfg_func: uart1-cfg-pins {
 				pinctrl-single,pins = <
 					0x210 0		/* UART1_CTS (IOCFG140) */
 					0x214 0		/* UART1_RTS (IOCFG141) */
@@ -385,7 +382,7 @@
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart1_cfg_idle: uart1_cfg_idle {
+			uart1_cfg_idle: uart1-cfg-idle-pins {
 				pinctrl-single,pins = <
 					0x210 0		/* UART1_CTS (IOCFG140) */
 					0x214 0		/* UART1_RTS (IOCFG141) */
@@ -395,7 +392,7 @@
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart2_cfg_func: uart2_cfg_func {
+			uart2_cfg_func: uart2-cfg-pins {
 				pinctrl-single,pins = <
 					0x220 0		/* UART2_CTS (IOCFG144) */
 					0x224 0		/* UART2_RTS (IOCFG145) */
@@ -405,7 +402,7 @@
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart2_cfg_idle: uart2_cfg_idle {
+			uart2_cfg_idle: uart2-cfg-idle-pins {
 				pinctrl-single,pins = <
 					0x220 0		/* GPIO (IOCFG144) */
 					0x224 0		/* GPIO (IOCFG145) */
@@ -415,7 +412,7 @@
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart3_cfg_func: uart3_cfg_func {
+			uart3_cfg_func: uart3-cfg-pins {
 				pinctrl-single,pins = <
 					0x294 0		/* UART3_CTS (IOCFG173) */
 					0x298 0		/* UART3_RTS (IOCFG174) */
@@ -425,7 +422,7 @@
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart3_cfg_idle: uart3_cfg_idle {
+			uart3_cfg_idle: uart3-cfg-idle-pins {
 				pinctrl-single,pins = <
 					0x294 0		/* UART3_CTS (IOCFG173) */
 					0x298 0		/* UART3_RTS (IOCFG174) */
@@ -435,7 +432,7 @@
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart4_cfg_func: uart4_cfg_func {
+			uart4_cfg_func: uart4-cfg-pins {
 				pinctrl-single,pins = <
 					0x2a4 0		/* UART4_CTS (IOCFG177) */
 					0x2a8 0		/* UART4_RTS (IOCFG178) */
@@ -445,7 +442,7 @@
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			i2c0_cfg_func: i2c0_cfg_func {
+			i2c0_cfg_func: i2c0-cfg-pins {
 				pinctrl-single,pins = <
 					0x17c 0		/* I2C0_SCL (IOCFG103) */
 					0x180 0		/* I2C0_SDA (IOCFG104) */
@@ -454,7 +451,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			i2c1_cfg_func: i2c1_cfg_func {
+			i2c1_cfg_func: i2c1-cfg-pins {
 				pinctrl-single,pins = <
 					0x184 0		/* I2C1_SCL (IOCFG105) */
 					0x188 0		/* I2C1_SDA (IOCFG106) */
@@ -463,7 +460,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			i2c2_cfg_func: i2c2_cfg_func {
+			i2c2_cfg_func: i2c2-cfg-pins {
 				pinctrl-single,pins = <
 					0x118 0		/* I2C2_SCL (IOCFG79) */
 					0x11c 0		/* I2C2_SDA (IOCFG80) */
@@ -472,7 +469,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			i2c3_cfg_func: i2c3_cfg_func {
+			i2c3_cfg_func: i2c3-cfg-pins {
 				pinctrl-single,pins = <
 					0x100 0		/* I2C3_SCL (IOCFG73) */
 					0x104 0		/* I2C3_SDA (IOCFG74) */
@@ -481,7 +478,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			spi0_cfg_func1: spi0_cfg_func1 {
+			spi0_cfg_func1: spi0-cfg-func1-pins {
 				pinctrl-single,pins = <
 					0x1d4 0		/* SPI0_CLK (IOCFG125) */
 					0x1d8 0		/* SPI0_DI (IOCFG126) */
@@ -491,7 +488,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			spi0_cfg_func2: spi0_cfg_func2 {
+			spi0_cfg_func2: spi0-cfg-func2-pins {
 				pinctrl-single,pins = <
 					0x1e0 0		/* SPI0_CS0 (IOCFG128) */
 					0x1e4 0		/* SPI0_CS1 (IOCFG129) */
@@ -502,7 +499,7 @@
 				pinctrl-single,bias-pullup = <1 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			spi1_cfg_func1: spi1_cfg_func1 {
+			spi1_cfg_func1: spi1-cfg-func1-pins {
 				pinctrl-single,pins = <
 					0x1f0 0		/* SPI1_CLK (IOCFG132) */
 					0x1f4 0		/* SPI1_DI (IOCFG133) */
@@ -512,7 +509,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			spi1_cfg_func2: spi1_cfg_func2 {
+			spi1_cfg_func2: spi1-cfg-func2-pins {
 				pinctrl-single,pins = <
 					0x1fc 0		/* SPI1_CS (IOCFG135) */
 				>;
@@ -520,7 +517,7 @@
 				pinctrl-single,bias-pullup = <1 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			kpc_cfg_func: kpc_cfg_func {
+			kpc_cfg_func: kpc-cfg-pins {
 				pinctrl-single,pins = <
 					0x250 0		/* KEY_IN0 (IOCFG156) */
 					0x254 0		/* KEY_IN1 (IOCFG157) */
@@ -532,7 +529,7 @@
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			emmc_cfg_func: emmc_cfg_func {
+			emmc_cfg_func: emmc-cfg-pins {
 				pinctrl-single,pins = <
 					0x0ac 0		/* eMMC_CMD (IOCFG40) */
 					0x0b0 0		/* eMMC_CLK (IOCFG41) */
@@ -552,7 +549,7 @@
 				pinctrl-single,bias-pullup = <1 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			sd_cfg_func1: sd_cfg_func1 {
+			sd_cfg_func1: sd-cfg-func1-pins {
 				pinctrl-single,pins = <
 					0x18c 0		/* SD_CLK (IOCFG107) */
 					0x190 0		/* SD_CMD (IOCFG108) */
@@ -561,7 +558,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			sd_cfg_func2: sd_cfg_func2 {
+			sd_cfg_func2: sd-cfg-func2-pins {
 				pinctrl-single,pins = <
 					0x194 0		/* SD_DATA0 (IOCFG109) */
 					0x198 0		/* SD_DATA1 (IOCFG110) */
@@ -572,7 +569,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x70 0xf0>;
 			};
-			nand_cfg_func1: nand_cfg_func1 {
+			nand_cfg_func1: nand-cfg-func1-pins {
 				pinctrl-single,pins = <
 					0x03c 0		/* NAND_ALE (IOCFG12) */
 					0x040 0		/* NAND_CLE (IOCFG13) */
@@ -597,7 +594,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			nand_cfg_func2: nand_cfg_func2 {
+			nand_cfg_func2: nand-cfg-func2-pins {
 				pinctrl-single,pins = <
 					0x044 0		/* NAND_RE_N (IOCFG14) */
 					0x048 0		/* NAND_WE_N (IOCFG15) */
@@ -614,7 +611,7 @@
 				pinctrl-single,bias-pullup = <1 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			sdio_cfg_func: sdio_cfg_func {
+			sdio_cfg_func: sdio-cfg-pins {
 				pinctrl-single,pins = <
 					0x1a4 0		/* SDIO0_CLK (IOCG113) */
 					0x1a8 0		/* SDIO0_CMD (IOCG114) */
@@ -627,7 +624,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			audio_out_cfg_func: audio_out_cfg_func {
+			audio_out_cfg_func: audio-out-cfg-pins {
 				pinctrl-single,pins = <
 					0x200 0		/* GPIO (IOCFG136) */
 					0x204 0		/* GPIO (IOCFG137) */
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hisilicon/hi3620.dtsi
index 541d70094544..a254ec009296 100644
--- a/arch/arm/boot/dts/hi3620.dtsi
+++ b/arch/arm/boot/dts/hisilicon/hi3620.dtsi
@@ -1,14 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Hisilicon Ltd. Hi3620 SoC
+ * HiSilicon Ltd. Hi3620 SoC
  *
- * Copyright (C) 2012-2013 Hisilicon Ltd.
+ * Copyright (C) 2012-2013 HiSilicon Ltd.
  * Copyright (C) 2012-2013 Linaro Ltd.
  *
  * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
  */
 
 #include <dt-bindings/clock/hi3620-clock.h>
@@ -66,7 +63,7 @@
 		};
 	};
 
-	amba {
+	amba-bus {
 
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -74,7 +71,7 @@
 		interrupt-parent = <&gic>;
 		ranges = <0 0xfc000000 0x2000000>;
 
-		L2: l2-cache {
+		L2: cache-controller {
 			compatible = "arm,pl310-cache";
 			reg = <0x100000 0x100000>;
 			interrupts = <0 15 4>;
@@ -92,7 +89,7 @@
 		};
 
 		sysctrl: system-controller@802000 {
-			compatible = "hisilicon,sysctrl";
+			compatible = "hisilicon,sysctrl", "syscon";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x802000 0x1000>;
@@ -114,8 +111,10 @@
 			reg = <0x800000 0x1000>;
 			/* timer00 & timer01 */
 			interrupts = <0 0 4>, <0 1 4>;
-			clocks = <&clock HI3620_TIMER0_MUX>, <&clock HI3620_TIMER1_MUX>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_TIMER0_MUX>,
+				 <&clock HI3620_TIMER1_MUX>,
+				 <&clock HI3620_TIMER0_MUX>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -124,8 +123,10 @@
 			reg = <0x801000 0x1000>;
 			/* timer10 & timer11 */
 			interrupts = <0 2 4>, <0 3 4>;
-			clocks = <&clock HI3620_TIMER2_MUX>, <&clock HI3620_TIMER3_MUX>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_TIMER2_MUX>,
+				 <&clock HI3620_TIMER3_MUX>,
+				 <&clock HI3620_TIMER2_MUX>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -134,8 +135,10 @@
 			reg = <0xa01000 0x1000>;
 			/* timer20 & timer21 */
 			interrupts = <0 4 4>, <0 5 4>;
-			clocks = <&clock HI3620_TIMER4_MUX>, <&clock HI3620_TIMER5_MUX>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_TIMER4_MUX>,
+				 <&clock HI3620_TIMER5_MUX>,
+				 <&clock HI3620_TIMER4_MUX>;
+			clock-names = "timer0lck", "timer1clk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -144,8 +147,10 @@
 			reg = <0xa02000 0x1000>;
 			/* timer30 & timer31 */
 			interrupts = <0 6 4>, <0 7 4>;
-			clocks = <&clock HI3620_TIMER6_MUX>, <&clock HI3620_TIMER7_MUX>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_TIMER6_MUX>,
+				 <&clock HI3620_TIMER7_MUX>,
+				 <&clock HI3620_TIMER6_MUX>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -154,8 +159,10 @@
 			reg = <0xa03000 0x1000>;
 			/* timer40 & timer41 */
 			interrupts = <0 96 4>, <0 97 4>;
-			clocks = <&clock HI3620_TIMER8_MUX>, <&clock HI3620_TIMER9_MUX>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_TIMER8_MUX>,
+				 <&clock HI3620_TIMER9_MUX>,
+				 <&clock HI3620_TIMER8_MUX>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -165,48 +172,48 @@
 			interrupts = <1 13 0xf01>;
 		};
 
-		uart0: uart@b00000 {
+		uart0: serial@b00000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xb00000 0x1000>;
 			interrupts = <0 20 4>;
-			clocks = <&clock HI3620_UARTCLK0>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_UARTCLK0>, <&clock HI3620_UARTCLK0>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
 
-		uart1: uart@b01000 {
+		uart1: serial@b01000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xb01000 0x1000>;
 			interrupts = <0 21 4>;
-			clocks = <&clock HI3620_UARTCLK1>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_UARTCLK1>, <&clock HI3620_UARTCLK1>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
 
-		uart2: uart@b02000 {
+		uart2: serial@b02000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xb02000 0x1000>;
 			interrupts = <0 22 4>;
-			clocks = <&clock HI3620_UARTCLK2>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_UARTCLK2>, <&clock HI3620_UARTCLK2>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
 
-		uart3: uart@b03000 {
+		uart3: serial@b03000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xb03000 0x1000>;
 			interrupts = <0 23 4>;
-			clocks = <&clock HI3620_UARTCLK3>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_UARTCLK3>, <&clock HI3620_UARTCLK3>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
 
-		uart4: uart@b04000 {
+		uart4: serial@b04000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xb04000 0x1000>;
 			interrupts = <0 24 4>;
-			clocks = <&clock HI3620_UARTCLK4>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_UARTCLK4>, <&clock HI3620_UARTCLK4>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -538,10 +545,9 @@
 			compatible = "pinctrl-single";
 			reg = <0x803000 0x188>;
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			#pinctrl-cells = <1>;
 			#gpio-range-cells = <3>;
-			ranges;
 
 			pinctrl-single,register-width = <32>;
 			pinctrl-single,function-mask = <7>;
@@ -560,9 +566,8 @@
 			compatible = "pinconf-single";
 			reg = <0x803800 0x2dc>;
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			#pinctrl-cells = <1>;
-			ranges;
 
 			pinctrl-single,register-width = <32>;
 		};
diff --git a/arch/arm/boot/dts/hisilicon/hip01-ca9x2.dts b/arch/arm/boot/dts/hisilicon/hip01-ca9x2.dts
new file mode 100644
index 000000000000..f3faf247cd61
--- /dev/null
+++ b/arch/arm/boot/dts/hisilicon/hip01-ca9x2.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HiSilicon Ltd. HiP01 SoC
+ *
+ * Copyright (C) 2014 HiSilicon Ltd.
+ * Copyright (C) 2014 Huawei Ltd.
+ *
+ * Author: Wang Long <long.wanglong@huawei.com>
+ */
+
+/dts-v1/;
+
+/* First 8KB reserved for secondary core boot */
+/memreserve/ 0x80000000 0x00002000;
+
+#include "hip01.dtsi"
+
+/ {
+	model = "Hisilicon HIP01 Development Board";
+	compatible = "hisilicon,hip01-ca9x2", "hisilicon,hip01";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "hisilicon,hip01-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/hisilicon/hip01.dtsi b/arch/arm/boot/dts/hisilicon/hip01.dtsi
new file mode 100644
index 000000000000..e17f36bd9006
--- /dev/null
+++ b/arch/arm/boot/dts/hisilicon/hip01.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HiSilicon Ltd. HiP01 SoC
+ *
+ * Copyright (c) 2014 HiSilicon Ltd.
+ * Copyright (c) 2014 Huawei Ltd.
+ *
+ * Author: Wang Long <long.wanglong@huawei.com>
+ */
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	gic: interrupt-controller@1e001000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x1a001000 0x1000>, <0x1a000100 0x1000>;
+	};
+
+	hisi_refclk144mhz: refclk144mkhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <144000000>;
+		clock-output-names = "hisi:refclk144khz";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges = <0 0x10000000 0x20000000>;
+
+		amba-bus {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges;
+
+			uart0: serial@10001000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x10001000 0x1000>;
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
+				reg-shift = <2>;
+				interrupts = <0 32 4>;
+				status = "disabled";
+			};
+
+			uart1: serial@10002000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x10002000 0x1000>;
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
+				reg-shift = <2>;
+				interrupts = <0 33 4>;
+				status = "disabled";
+			};
+
+			uart2: serial@10003000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x10003000 0x1000>;
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
+				reg-shift = <2>;
+				interrupts = <0 34 4>;
+				status = "disabled";
+			};
+
+			uart3: serial@10006000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x10006000 0x1000>;
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
+				reg-shift = <2>;
+				interrupts = <0 4 4>;
+				status = "disabled";
+			};
+		};
+
+		system-controller@10000000 {
+			compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";
+			reg = <0x10000000 0x1000>;
+			reboot-offset = <0x4>;
+		};
+
+		global_timer@a000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x0a000200 0x100>;
+			interrupts = <1 11 0xf04>;
+			clocks = <&hisi_refclk144mhz>;
+		};
+
+		local_timer@a000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x0a000600 0x100>;
+			interrupts = <1 13 0xf04>;
+			clocks = <&hisi_refclk144mhz>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hisilicon/hip04-d01.dts b/arch/arm/boot/dts/hisilicon/hip04-d01.dts
new file mode 100644
index 000000000000..0210064bf6a5
--- /dev/null
+++ b/arch/arm/boot/dts/hisilicon/hip04-d01.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2013-2014 Linaro Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "hip04.dtsi"
+
+/ {
+	/* memory bus is 64-bit */
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "Hisilicon D01 Development Board";
+	compatible = "hisilicon,hip04-d01";
+
+	memory@0,10000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000 0x00000000 0xc0000000>,
+		      <0x00000004 0xc0000000 0x00000003 0x40000000>;
+	};
+
+	soc {
+		uart0: serial@4007000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hisilicon/hip04.dtsi
index 44044f275115..2424cc545c9c 100644
--- a/arch/arm/boot/dts/hip04.dtsi
+++ b/arch/arm/boot/dts/hisilicon/hip04.dtsi
@@ -1,14 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Hisilicon Ltd. HiP04 SoC
+ * HiSilicon Ltd. HiP04 SoC
  *
- * Copyright (C) 2013-2014 Hisilicon Ltd.
+ * Copyright (C) 2013-2014 HiSilicon Ltd.
  * Copyright (C) 2013-2014 Linaro Ltd.
  *
  * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 / {
@@ -216,7 +213,7 @@
 		};
 
 		sysctrl: sysctrl {
-			compatible = "hisilicon,sysctrl";
+			compatible = "hisilicon,sysctrl", "syscon";
 			reg = <0x3e00000 0x00100000>;
 		};
 
@@ -229,8 +226,8 @@
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x3000000 0x1000>;
 			interrupts = <0 224 4>;
-			clocks = <&clk_50m>, <&clk_50m>;
-			clock-names = "apb_pclk";
+			clocks = <&clk_50m>, <&clk_50m>, <&clk_50m>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
 		};
 
 		arm-pmu {
@@ -253,12 +250,12 @@
 				     <0 79 4>;
 		};
 
-		uart0: uart@4007000 {
+		uart0: serial@4007000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x4007000 0x1000>;
 			interrupts = <0 381 4>;
-			clocks = <&clk_168m>;
-			clock-names = "uartclk";
+			clocks = <&clk_168m>, <&clk_168m>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			status = "disabled";
 		};
@@ -277,10 +274,11 @@
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		port {
-			etb0_in_port: endpoint@0 {
-				slave-mode;
-				remote-endpoint = <&replicator0_out_port0>;
+		in-ports {
+			port {
+				etb0_in_port: endpoint@0 {
+					remote-endpoint = <&replicator0_out_port0>;
+				};
 			};
 		};
 	};
@@ -291,10 +289,11 @@
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		port {
-			etb1_in_port: endpoint@0 {
-				slave-mode;
-				remote-endpoint = <&replicator1_out_port0>;
+		in-ports {
+			port {
+				etb1_in_port: endpoint@0 {
+					remote-endpoint = <&replicator1_out_port0>;
+				};
 			};
 		};
 	};
@@ -305,10 +304,11 @@
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		port {
-			etb2_in_port: endpoint@0 {
-				slave-mode;
-				remote-endpoint = <&replicator2_out_port0>;
+		in-ports {
+			port {
+				etb2_in_port: endpoint@0 {
+					remote-endpoint = <&replicator2_out_port0>;
+				};
 			};
 		};
 	};
@@ -319,10 +319,11 @@
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		port {
-			etb3_in_port: endpoint@0 {
-				slave-mode;
-				remote-endpoint = <&replicator3_out_port0>;
+		in-ports {
+			port {
+				etb3_in_port: endpoint@0 {
+					remote-endpoint = <&replicator3_out_port0>;
+				};
 			};
 		};
 	};
@@ -333,10 +334,11 @@
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		port {
-			tpiu_in_port: endpoint@0 {
-				slave-mode;
-				remote-endpoint = <&funnel4_out_port0>;
+		in-ports {
+			port {
+				tpiu_in_port: endpoint@0 {
+					remote-endpoint = <&funnel4_out_port0>;
+				};
 			};
 		};
 	};
@@ -345,9 +347,9 @@
 		/* non-configurable replicators don't show up on the
 		 * AMBA bus.  As such no need to add "arm,primecell".
 		 */
-		compatible = "arm,coresight-replicator";
+		compatible = "arm,coresight-static-replicator";
 
-		ports {
+		out-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
@@ -365,12 +367,11 @@
 					remote-endpoint = <&funnel4_in_port0>;
 				};
 			};
+		};
 
-			/* replicator input port */
-			port@2 {
-				reg = <0>;
+		in-ports {
+			port {
 				replicator0_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&funnel0_out_port0>;
 				};
 			};
@@ -381,9 +382,9 @@
 		/* non-configurable replicators don't show up on the
 		 * AMBA bus.  As such no need to add "arm,primecell".
 		 */
-		compatible = "arm,coresight-replicator";
+		compatible = "arm,coresight-static-replicator";
 
-		ports {
+		out-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
@@ -401,12 +402,11 @@
 					remote-endpoint = <&funnel4_in_port1>;
 				};
 			};
+		};
 
-			/* replicator input port */
-			port@2 {
-				reg = <0>;
+		in-ports {
+			port {
 				replicator1_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&funnel1_out_port0>;
 				};
 			};
@@ -417,13 +417,12 @@
 		/* non-configurable replicators don't show up on the
 		 * AMBA bus.  As such no need to add "arm,primecell".
 		 */
-		compatible = "arm,coresight-replicator";
+		compatible = "arm,coresight-static-replicator";
 
-		ports {
+		out-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			/* replicator output ports */
 			port@0 {
 				reg = <0>;
 				replicator2_out_port0: endpoint {
@@ -437,12 +436,11 @@
 					remote-endpoint = <&funnel4_in_port2>;
 				};
 			};
+		};
 
-			/* replicator input port */
-			port@2 {
-				reg = <0>;
+		in-ports {
+			port {
 				replicator2_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&funnel2_out_port0>;
 				};
 			};
@@ -453,13 +451,12 @@
 		/* non-configurable replicators don't show up on the
 		 * AMBA bus.  As such no need to add "arm,primecell".
 		 */
-		compatible = "arm,coresight-replicator";
+		compatible = "arm,coresight-static-replicator";
 
-		ports {
+		out-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			/* replicator output ports */
 			port@0 {
 				reg = <0>;
 				replicator3_out_port0: endpoint {
@@ -473,12 +470,11 @@
 					remote-endpoint = <&funnel4_in_port3>;
 				};
 			};
+		};
 
-			/* replicator input port */
-			port@2 {
-				reg = <0>;
+		in-ports {
+			port {
 				replicator3_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&funnel3_out_port0>;
 				};
 			};
@@ -486,53 +482,48 @@
 	};
 
 	funnel@0,e3c41000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 		reg = <0 0xe3c41000 0 0x1000>;
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel output port */
-			port@0 {
-				reg = <0>;
+		out-ports {
+			port {
 				funnel0_out_port0: endpoint {
 					remote-endpoint =
 						<&replicator0_in_port0>;
 				};
 			};
+		};
 
-			/* funnel input ports */
-			port@1 {
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
 				funnel0_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm0_out_port>;
 				};
 			};
 
-			port@2 {
+			port@1 {
 				reg = <1>;
 				funnel0_in_port1: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm1_out_port>;
 				};
 			};
 
-			port@3 {
+			port@2 {
 				reg = <2>;
 				funnel0_in_port2: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm2_out_port>;
 				};
 			};
 
-			port@4 {
+			port@3 {
 				reg = <3>;
 				funnel0_in_port3: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm3_out_port>;
 				};
 			};
@@ -540,53 +531,48 @@
 	};
 
 	funnel@0,e3c81000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 		reg = <0 0xe3c81000 0 0x1000>;
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel output port */
-			port@0 {
-				reg = <0>;
+		out-ports {
+			port {
 				funnel1_out_port0: endpoint {
 					remote-endpoint =
 						<&replicator1_in_port0>;
 				};
 			};
+		};
 
-			/* funnel input ports */
-			port@1 {
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
 				funnel1_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm4_out_port>;
 				};
 			};
 
-			port@2 {
+			port@1 {
 				reg = <1>;
 				funnel1_in_port1: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm5_out_port>;
 				};
 			};
 
-			port@3 {
+			port@2 {
 				reg = <2>;
 				funnel1_in_port2: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm6_out_port>;
 				};
 			};
 
-			port@4 {
+			port@3 {
 				reg = <3>;
 				funnel1_in_port3: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm7_out_port>;
 				};
 			};
@@ -594,53 +580,48 @@
 	};
 
 	funnel@0,e3cc1000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 		reg = <0 0xe3cc1000 0 0x1000>;
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel output port */
-			port@0 {
-				reg = <0>;
+		out-ports {
+			port {
 				funnel2_out_port0: endpoint {
 					remote-endpoint =
 						<&replicator2_in_port0>;
 				};
 			};
+		};
 
-			/* funnel input ports */
-			port@1 {
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
 				funnel2_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm8_out_port>;
 				};
 			};
 
-			port@2 {
+			port@1 {
 				reg = <1>;
 				funnel2_in_port1: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm9_out_port>;
 				};
 			};
 
-			port@3 {
+			port@2 {
 				reg = <2>;
 				funnel2_in_port2: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm10_out_port>;
 				};
 			};
 
-			port@4 {
+			port@3 {
 				reg = <3>;
 				funnel2_in_port3: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm11_out_port>;
 				};
 			};
@@ -648,53 +629,48 @@
 	};
 
 	funnel@0,e3d01000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 		reg = <0 0xe3d01000 0 0x1000>;
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel output port */
-			port@0 {
-				reg = <0>;
+		out-ports {
+			port {
 				funnel3_out_port0: endpoint {
 					remote-endpoint =
 						<&replicator3_in_port0>;
 				};
 			};
+		};
 
-			/* funnel input ports */
-			port@1 {
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
 				funnel3_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm12_out_port>;
 				};
 			};
 
-			port@2 {
+			port@1 {
 				reg = <1>;
 				funnel3_in_port1: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm13_out_port>;
 				};
 			};
 
-			port@3 {
+			port@2 {
 				reg = <2>;
 				funnel3_in_port2: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm14_out_port>;
 				};
 			};
 
-			port@4 {
+			port@3 {
 				reg = <3>;
 				funnel3_in_port3: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm15_out_port>;
 				};
 			};
@@ -702,55 +678,50 @@
 	};
 
 	funnel@0,e3c04000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 		reg = <0 0xe3c04000 0 0x1000>;
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel output port */
-			port@0 {
-				reg = <0>;
+		out-ports {
+			port {
 				funnel4_out_port0: endpoint {
 					remote-endpoint = <&tpiu_in_port>;
 				};
 			};
+		};
 
-			/* funnel input ports */
-			port@1 {
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
 				funnel4_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint =
 						<&replicator0_out_port1>;
 				};
 			};
 
-			port@2 {
+			port@1 {
 				reg = <1>;
 				funnel4_in_port1: endpoint {
-					slave-mode;
 					remote-endpoint =
 						<&replicator1_out_port1>;
 				};
 			};
 
-			port@3 {
+			port@2 {
 				reg = <2>;
 				funnel4_in_port2: endpoint {
-					slave-mode;
 					remote-endpoint =
 						<&replicator2_out_port1>;
 				};
 			};
 
-			port@4 {
+			port@3 {
 				reg = <3>;
 				funnel4_in_port3: endpoint {
-					slave-mode;
 					remote-endpoint =
 						<&replicator3_out_port1>;
 				};
@@ -765,9 +736,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU0>;
-		port {
-			ptm0_out_port: endpoint {
-				remote-endpoint = <&funnel0_in_port0>;
+		out-ports {
+			port {
+				ptm0_out_port: endpoint {
+					remote-endpoint = <&funnel0_in_port0>;
+				};
 			};
 		};
 	};
@@ -779,9 +752,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU1>;
-		port {
-			ptm1_out_port: endpoint {
-				remote-endpoint = <&funnel0_in_port1>;
+		out-ports {
+			port {
+				ptm1_out_port: endpoint {
+					remote-endpoint = <&funnel0_in_port1>;
+				};
 			};
 		};
 	};
@@ -793,9 +768,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU2>;
-		port {
-			ptm2_out_port: endpoint {
-				remote-endpoint = <&funnel0_in_port2>;
+		out-ports {
+			port {
+				ptm2_out_port: endpoint {
+					remote-endpoint = <&funnel0_in_port2>;
+				};
 			};
 		};
 	};
@@ -807,9 +784,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU3>;
-		port {
-			ptm3_out_port: endpoint {
-				remote-endpoint = <&funnel0_in_port3>;
+		out-ports {
+			port {
+				ptm3_out_port: endpoint {
+					remote-endpoint = <&funnel0_in_port3>;
+				};
 			};
 		};
 	};
@@ -821,9 +800,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU4>;
-		port {
-			ptm4_out_port: endpoint {
-				remote-endpoint = <&funnel1_in_port0>;
+		out-ports {
+			port {
+				ptm4_out_port: endpoint {
+					remote-endpoint = <&funnel1_in_port0>;
+				};
 			};
 		};
 	};
@@ -835,9 +816,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU5>;
-		port {
-			ptm5_out_port: endpoint {
-				remote-endpoint = <&funnel1_in_port1>;
+		out-ports {
+			port {
+				ptm5_out_port: endpoint {
+					remote-endpoint = <&funnel1_in_port1>;
+				};
 			};
 		};
 	};
@@ -849,9 +832,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU6>;
-		port {
-			ptm6_out_port: endpoint {
-				remote-endpoint = <&funnel1_in_port2>;
+		out-ports {
+			port {
+				ptm6_out_port: endpoint {
+					remote-endpoint = <&funnel1_in_port2>;
+				};
 			};
 		};
 	};
@@ -863,9 +848,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU7>;
-		port {
-			ptm7_out_port: endpoint {
-				remote-endpoint = <&funnel1_in_port3>;
+		out-ports {
+			port {
+				ptm7_out_port: endpoint {
+					remote-endpoint = <&funnel1_in_port3>;
+				};
 			};
 		};
 	};
@@ -877,9 +864,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU8>;
-		port {
-			ptm8_out_port: endpoint {
-				remote-endpoint = <&funnel2_in_port0>;
+		out-ports {
+			port {
+				ptm8_out_port: endpoint {
+					remote-endpoint = <&funnel2_in_port0>;
+				};
 			};
 		};
 	};
@@ -890,9 +879,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU9>;
-		port {
-			ptm9_out_port: endpoint {
-				remote-endpoint = <&funnel2_in_port1>;
+		out-ports {
+			port {
+				ptm9_out_port: endpoint {
+					remote-endpoint = <&funnel2_in_port1>;
+				};
 			};
 		};
 	};
@@ -904,9 +895,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU10>;
-		port {
-			ptm10_out_port: endpoint {
-				remote-endpoint = <&funnel2_in_port2>;
+		out-ports {
+			port {
+				ptm10_out_port: endpoint {
+					remote-endpoint = <&funnel2_in_port2>;
+				};
 			};
 		};
 	};
@@ -918,9 +911,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU11>;
-		port {
-			ptm11_out_port: endpoint {
-				remote-endpoint = <&funnel2_in_port3>;
+		out-ports {
+			port {
+				ptm11_out_port: endpoint {
+					remote-endpoint = <&funnel2_in_port3>;
+				};
 			};
 		};
 	};
@@ -932,9 +927,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU12>;
-		port {
-			ptm12_out_port: endpoint {
-				remote-endpoint = <&funnel3_in_port0>;
+		out-ports {
+			port {
+				ptm12_out_port: endpoint {
+					remote-endpoint = <&funnel3_in_port0>;
+				};
 			};
 		};
 	};
@@ -946,9 +943,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU13>;
-		port {
-			ptm13_out_port: endpoint {
-				remote-endpoint = <&funnel3_in_port1>;
+		out-ports {
+			port {
+				ptm13_out_port: endpoint {
+					remote-endpoint = <&funnel3_in_port1>;
+				};
 			};
 		};
 	};
@@ -960,9 +959,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU14>;
-		port {
-			ptm14_out_port: endpoint {
-				remote-endpoint = <&funnel3_in_port2>;
+		out-ports {
+			port {
+				ptm14_out_port: endpoint {
+					remote-endpoint = <&funnel3_in_port2>;
+				};
 			};
 		};
 	};
@@ -974,9 +975,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU15>;
-		port {
-			ptm15_out_port: endpoint {
-				remote-endpoint = <&funnel3_in_port3>;
+		out-ports {
+			port {
+				ptm15_out_port: endpoint {
+					remote-endpoint = <&funnel3_in_port3>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisilicon/hisi-x5hd2-dkb.dts
index d13af8437d10..7758c19038f0 100644
--- a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
+++ b/arch/arm/boot/dts/hisilicon/hisi-x5hd2-dkb.dts
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) 2013-2014 Linaro Ltd.
- * Copyright (c) 2013-2014 Hisilicon Limited.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
+ * Copyright (c) 2013-2014 HiSilicon Limited.
  */
 
 /dts-v1/;
@@ -38,7 +35,7 @@
 		};
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000>;
 	};
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisilicon/hisi-x5hd2.dtsi
index 6c712a97e1fe..dc991ba2a9fb 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisilicon/hisi-x5hd2.dtsi
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) 2013-2014 Linaro Ltd.
- * Copyright (c) 2013-2014 Hisilicon Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
+ * Copyright (c) 2013-2014 HiSilicon Limited.
  */
 
 #include <dt-bindings/clock/hix5hd2-clock.h>
@@ -33,13 +30,13 @@
 		interrupt-parent = <&gic>;
 		ranges = <0 0xf8000000 0x8000000>;
 
-		amba {
+		amba-bus {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
 			ranges;
 
-			timer0: timer@00002000 {
+			timer0: timer@2000 {
 				compatible = "arm,sp804", "arm,primecell";
 				reg = <0x00002000 0x1000>;
 				/* timer00 & timer01 */
@@ -48,7 +45,7 @@
 				status = "disabled";
 			};
 
-			timer1: timer@00a29000 {
+			timer1: timer@a29000 {
 				/*
 				 * Only used in NORMAL state, not available ins
 				 * SLOW or DOZE state.
@@ -62,7 +59,7 @@
 				status = "disabled";
 			};
 
-			timer2: timer@00a2a000 {
+			timer2: timer@a2a000 {
 				compatible = "arm,sp804", "arm,primecell";
 				reg = <0x00a2a000 0x1000>;
 				/* timer20 & timer21 */
@@ -71,7 +68,7 @@
 				status = "disabled";
 			};
 
-			timer3: timer@00a2b000 {
+			timer3: timer@a2b000 {
 				compatible = "arm,sp804", "arm,primecell";
 				reg = <0x00a2b000 0x1000>;
 				/* timer30 & timer31 */
@@ -80,7 +77,7 @@
 				status = "disabled";
 			};
 
-			timer4: timer@00a81000 {
+			timer4: timer@a81000 {
 				compatible = "arm,sp804", "arm,primecell";
 				reg = <0x00a81000 0x1000>;
 				/* timer30 & timer31 */
@@ -89,48 +86,48 @@
 				status = "disabled";
 			};
 
-			uart0: uart@00b00000 {
+			uart0: serial@b00000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x00b00000 0x1000>;
 				interrupts = <0 49 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
 				status = "disabled";
 			};
 
-			uart1: uart@00006000 {
+			uart1: serial@6000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x00006000 0x1000>;
 				interrupts = <0 50 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
 				status = "disabled";
 			};
 
-			uart2: uart@00b02000 {
+			uart2: serial@b02000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x00b02000 0x1000>;
 				interrupts = <0 51 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
 				status = "disabled";
 			};
 
-			uart3: uart@00b03000 {
+			uart3: serial@b03000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x00b03000 0x1000>;
 				interrupts = <0 52 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
 				status = "disabled";
 			};
 
-			uart4: uart@00b04000 {
+			uart4: serial@b04000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0xb04000 0x1000>;
 				interrupts = <0 53 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
 				status = "disabled";
 			};
 
@@ -199,7 +196,7 @@
 				status = "disabled";
 			};
 
-			gpio5: gpio@004000 {
+			gpio5: gpio@4000 {
 				compatible = "arm,pl061", "arm,primecell";
 				reg = <0x004000 0x1000>;
 				interrupts = <0 113 0x4>;
@@ -373,18 +370,19 @@
 				arm,primecell-periphid = <0x00141805>;
 				reg = <0xa2c000 0x1000>;
 				interrupts = <0 29 4>;
-				clocks = <&clock HIX5HD2_WDG0_RST>;
-				clock-names = "apb_pclk";
+				clocks = <&clock HIX5HD2_WDG0_RST>,
+					 <&clock HIX5HD2_WDG0_RST>;
+				clock-names = "wdog_clk", "apb_pclk";
 			};
 		};
 
-		local_timer@00a00600 {
+		local_timer@a00600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x00a00600 0x20>;
 			interrupts = <1 13 0xf01>;
 		};
 
-		l2: l2-cache {
+		l2: cache-controller {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a10000 0x100000>;
 			interrupts = <0 15 4>;
@@ -392,7 +390,7 @@
 			cache-level = <2>;
 		};
 
-		sysctrl: system-controller@00000000 {
+		sysctrl: system-controller@0 {
 			compatible = "hisilicon,sysctrl", "syscon";
 			reg = <0x00000000 0x1000>;
 		};
@@ -404,7 +402,7 @@
 			mask = <0xdeadbeef>;
 		};
 
-		cpuctrl@00a22000 {
+		cpuctrl@a22000 {
 			compatible = "hisilicon,cpuctrl";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -425,7 +423,7 @@
 			interrupts = <0 35 4>;
 			clocks = <&clock HIX5HD2_MMC_CIU_RST>,
 				 <&clock HIX5HD2_MMC_BIU_CLK>;
-			clock-names = "ciu", "biu";
+			clock-names = "biu", "ciu";
 		};
 
 		sd: mmc@1820000 {
@@ -434,7 +432,7 @@
 			interrupts = <0 34 4>;
 			clocks = <&clock HIX5HD2_SD_CIU_RST>,
 				 <&clock HIX5HD2_SD_BIU_CLK>;
-			clock-names = "ciu","biu";
+			clock-names = "biu", "ciu";
 		};
 
 		gmac0: ethernet@1840000 {
@@ -455,14 +453,14 @@
 			status = "disabled";
 		};
 
-		usb0: ehci@1890000 {
+		usb0: usb@1890000 {
 			compatible = "generic-ehci";
 			reg = <0x1890000 0x1000>;
 			interrupts = <0 66 4>;
 			clocks = <&clock HIX5HD2_USB_CLK>;
 		};
 
-		usb1: ohci@1880000 {
+		usb1: usb@1880000 {
 			compatible = "generic-ohci";
 			reg = <0x1880000 0x1000>;
 			interrupts = <0 67 4>;
@@ -470,7 +468,7 @@
 		};
 
 		peripheral_ctrl: syscon@a20000 {
-			compatible = "syscon";
+			compatible = "hisilicon,peri-subctrl", "syscon";
 			reg = <0xa20000 0x1000>;
 		};
 
@@ -489,7 +487,7 @@
 			clocks = <&clock HIX5HD2_SATA_CLK>;
 		};
 
-		ir: ir@001000 {
+		ir: ir@1000 {
 			compatible = "hisilicon,hix5hd2-ir";
 			reg = <0x001000 0x1000>;
 			interrupts = <0 47 4>;
diff --git a/arch/arm/boot/dts/hisilicon/sd5203.dts b/arch/arm/boot/dts/hisilicon/sd5203.dts
new file mode 100644
index 000000000000..69381819e07b
--- /dev/null
+++ b/arch/arm/boot/dts/hisilicon/sd5203.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020 HiSilicon Limited.
+ *
+ * DTS file for Hisilicon SD5203 Board
+ */
+
+/dts-v1/;
+
+/ {
+	model = "Hisilicon SD5203";
+	compatible = "H836ASDJ", "hisilicon,sd5203";
+	interrupt-parent = <&vic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		bootargs = "console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0 {
+			device_type = "cpu";
+			compatible = "arm,arm926ej-s";
+			reg = <0x0>;
+		};
+	};
+
+	memory@30000000 {
+		device_type = "memory";
+		reg = <0x30000000 0x8000000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		vic: interrupt-controller@10130000 {
+			compatible = "snps,dw-apb-ictl";
+			reg = <0x10130000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		refclk125mhz: refclk125mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		timer0: timer@16002000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x16002000 0x1000>;
+			interrupts = <4>;
+			clocks = <&refclk125mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		timer1: timer@16003000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x16003000 0x1000>;
+			interrupts = <5>;
+			clocks = <&refclk125mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		uart0: serial@1600d000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x1600d000 0x1000>;
+			bus_id = "uart0";
+			clocks = <&refclk125mhz>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			interrupts = <17>;
+		};
+
+		uart1: serial@1600c000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x1600c000 0x1000>;
+			clocks = <&refclk125mhz>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			interrupts = <16>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hpe/Makefile b/arch/arm/boot/dts/hpe/Makefile
new file mode 100644
index 000000000000..e175b1732cdb
--- /dev/null
+++ b/arch/arm/boot/dts/hpe/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_HPE_GXP) += \
+	hpe-bmc-dl360gen10.dtb
diff --git a/arch/arm/boot/dts/hpe/hpe-bmc-dl360gen10.dts b/arch/arm/boot/dts/hpe/hpe-bmc-dl360gen10.dts
new file mode 100644
index 000000000000..3a7382ce40ef
--- /dev/null
+++ b/arch/arm/boot/dts/hpe/hpe-bmc-dl360gen10.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for HPE DL360Gen10
+ */
+
+/include/ "hpe-gxp.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "hpe,gxp-dl360gen10", "hpe,gxp";
+	model = "Hewlett Packard Enterprise ProLiant dl360 Gen10";
+
+	aliases {
+		serial0 = &uartc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/hpe/hpe-gxp.dtsi b/arch/arm/boot/dts/hpe/hpe-gxp.dtsi
new file mode 100644
index 000000000000..cf735b3c4f35
--- /dev/null
+++ b/arch/arm/boot/dts/hpe/hpe-gxp.dtsi
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for HPE GXP
+ */
+
+/dts-v1/;
+/ {
+	model = "Hewlett Packard Enterprise GXP BMC";
+	compatible = "hpe,gxp";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			device_type = "cpu";
+			next-level-cache = <&L2>;
+		};
+	};
+
+	clocks {
+		pll: clock-0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1600000000>;
+		};
+
+		iopclk: clock-1 {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&pll>;
+		};
+	};
+
+	axi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		dma-ranges;
+
+		L2: cache-controller@b0040000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xb0040000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		ahb@c0000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc0000000 0x30000000>;
+			dma-ranges;
+
+			vic0: interrupt-controller@eff0000 {
+				compatible = "arm,pl192-vic";
+				reg = <0xeff0000 0x1000>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			vic1: interrupt-controller@80f00000 {
+				compatible = "arm,pl192-vic";
+				reg = <0x80f00000 0x1000>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			uarta: serial@e0 {
+				compatible = "ns16550a";
+				reg = <0xe0 0x8>;
+				interrupts = <17>;
+				interrupt-parent = <&vic0>;
+				clock-frequency = <1846153>;
+				reg-shift = <0>;
+			};
+
+			uartb: serial@e8 {
+				compatible = "ns16550a";
+				reg = <0xe8 0x8>;
+				interrupts = <18>;
+				interrupt-parent = <&vic0>;
+				clock-frequency = <1846153>;
+				reg-shift = <0>;
+			};
+
+			uartc: serial@f0 {
+				compatible = "ns16550a";
+				reg = <0xf0 0x8>;
+				interrupts = <19>;
+				interrupt-parent = <&vic0>;
+				clock-frequency = <1846153>;
+				reg-shift = <0>;
+			};
+
+			usb0: usb@efe0000 {
+				compatible = "hpe,gxp-ehci", "generic-ehci";
+				reg = <0xefe0000 0x100>;
+				interrupts = <7>;
+				interrupt-parent = <&vic0>;
+			};
+
+			st: timer@80 {
+				compatible = "hpe,gxp-timer";
+				reg = <0x80 0x16>;
+				interrupts = <0>;
+				interrupt-parent = <&vic0>;
+				clocks = <&iopclk>;
+				clock-names = "iop";
+			};
+
+			usb1: usb@efe0100 {
+				compatible = "hpe,gxp-ohci", "generic-ohci";
+				reg = <0xefe0100 0x110>;
+				interrupts = <6>;
+				interrupt-parent = <&vic0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
deleted file mode 100644
index 57e29977ba06..000000000000
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx23.dtsi"
-
-/ {
-	model = "Freescale i.MX23 Evaluation Kit";
-	compatible = "fsl,imx23-evk", "fsl,imx23";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>;
-				status = "okay";
-			};
-
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx23-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
-				bus-width = <4>;
-				wp-gpios = <&gpio1 30 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_LCD_RESET__GPIO_1_18
-						MX23_PAD_PWM3__GPIO_1_29
-						MX23_PAD_PWM4__GPIO_1_30
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a>;
-				lcd-supply = <&reg_lcd_3v3>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <9200000>;
-							hactive = <480>;
-							vactive = <272>;
-							hback-porch = <15>;
-							hfront-porch = <8>;
-							vback-porch = <12>;
-							vfront-porch = <4>;
-							hsync-len = <1>;
-							vsync-len = <1>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm2_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_vddio_sd0: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 29 0>;
-		};
-
-		reg_lcd_3v3: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "lcd-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 18 0>;
-			enable-active-high;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 2 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
deleted file mode 100644
index a8b1c53ebe46..000000000000
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "imx23.dtsi"
-
-/ {
-	model = "i.MX23 Olinuxino Low Cost Board";
-	compatible = "olimex,imx23-olinuxino", "fsl,imx23";
-
-	memory {
-		reg = <0x40000000 0x04000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx23-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
-				bus-width = <4>;
-				broken-cd;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_GPMI_ALE__GPIO_0_17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pin_gpio2_1: led_gpio2_1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_SSP1_DETECT__GPIO_2_1
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			ssp1: ssp@80034000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx23-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			i2c: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c_pins_b>;
-				status = "okay";
-			};
-
-			duart: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			dr_mode = "host";
-			vbus-supply = <&reg_usb0_vbus>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */
-			gpio = <&gpio0 17 0>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio2_1>;
-
-		user {
-			label = "green";
-			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
deleted file mode 100644
index 455169e99d49..000000000000
--- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx23.dtsi"
-
-/ {
-	model = "Freescale STMP378x Development Board";
-	compatible = "fsl,stmp378x-devb", "fsl,imx23";
-
-	memory {
-		reg = <0x40000000 0x04000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx23-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
-				bus-width = <4>;
-				wp-gpios = <&gpio1 30 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_PWM3__GPIO_1_29
-						MX23_PAD_PWM4__GPIO_1_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			auart0: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_vddio_sd0: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 29 0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
deleted file mode 100644
index d6f27641c0ef..000000000000
--- a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include "imx25.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX25";
-	compatible = "eukrea,cpuimx25", "fsl,imx25";
-
-	memory {
-		reg = <0x80000000 0x4000000>; /* 64M */
-	};
-};
-
-&fec {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&iomuxc {
-	imx25-eukrea-cpuimx25 {
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX25_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX25_PAD_FEC_MDIO__FEC_MDIO		0x400001e0
-				MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x80000000
-				MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x80000000
-				MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x80000000
-				MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x80000000
-				MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
-				MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1c0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX25_PAD_I2C1_CLK__I2C1_CLK		0x80000000
-				MX25_PAD_I2C1_DAT__I2C1_DAT		0x80000000
-			>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
deleted file mode 100644
index 68d0834a2d1e..000000000000
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include "imx25-eukrea-mbimxsd25-baseboard.dts"
-
-/ {
-	model = "Eukrea MBIMXSD25 with the CMO-QVGA Display";
-	compatible = "eukrea,mbimxsd25-baseboard-cmo-qvga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
-
-	cmo_qvga: display {
-		model = "CMO-QVGA";
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xcad08b80>;
-		bus-width = <18>;
-		native-mode = <&qvga_timings>;
-		display-timings {
-			qvga_timings: 320x240 {
-				clock-frequency = <6500000>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <30>;
-				hfront-porch = <38>;
-				vback-porch = <20>;
-				vfront-porch = <3>;
-				hsync-len = <15>;
-				vsync-len = <4>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_lcd_3v3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
-			regulator-name = "lcd-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-};
-
-&iomuxc {
-	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga {
-		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
-			fsl,pins = <MX25_PAD_PWM__GPIO_1_26 0x80000000>;
-		};
-	};
-};
-
-&lcdc {
-	display = <&cmo_qvga>;
-	fsl,lpccr = <0x00a903ff>;
-	lcd-supply = <&reg_lcd_3v3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
deleted file mode 100644
index 8eee2f65fe00..000000000000
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include "imx25-eukrea-mbimxsd25-baseboard.dts"
-
-/ {
-	model = "Eukrea MBIMXSD25 with the DVI-SVGA Display";
-	compatible = "eukrea,mbimxsd25-baseboard-dvi-svga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
-
-	dvi_svga: display {
-		model = "DVI-SVGA";
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xfa208b80>;
-		bus-width = <18>;
-		native-mode = <&dvi_svga_timings>;
-		display-timings {
-			dvi_svga_timings: 800x600 {
-				clock-frequency = <40000000>;
-				hactive = <800>;
-				vactive = <600>;
-				hback-porch = <75>;
-				hfront-porch = <75>;
-				vback-porch = <7>;
-				vfront-porch = <75>;
-				hsync-len = <7>;
-				vsync-len = <7>;
-			};
-		};
-	};
-};
-
-&lcdc {
-	display = <&dvi_svga>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
deleted file mode 100644
index 447da6263169..000000000000
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include "imx25-eukrea-mbimxsd25-baseboard.dts"
-
-/ {
-	model = "Eukrea MBIMXSD25 with the DVI-VGA Display";
-	compatible = "eukrea,mbimxsd25-baseboard-dvi-vga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
-
-	dvi_vga: display {
-		model = "DVI-VGA";
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xfa208b80>;
-		bus-width = <18>;
-		native-mode = <&dvi_vga_timings>;
-		display-timings {
-			dvi_vga_timings: 640x480 {
-				clock-frequency = <31250000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <100>;
-				hfront-porch = <100>;
-				vback-porch = <7>;
-				vfront-porch = <100>;
-				hsync-len = <7>;
-				vsync-len = <7>;
-			};
-		};
-	};
-};
-
-&lcdc {
-	display = <&dvi_vga>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts
deleted file mode 100644
index 30a62d4be8d9..000000000000
--- a/arch/arm/boot/dts/imx25-karo-tx25.dts
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx25.dtsi"
-
-/ {
-	model = "Ka-Ro TX25";
-	compatible = "karo,imx25-tx25", "fsl,imx25";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_fec_phy: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "fec-phy";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio4 9 0>;
-			enable-active-high;
-		};
-	};
-
-	memory {
-		reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
-	};
-};
-
-&iomuxc {
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
-			MX25_PAD_UART1_RXD__UART1_RXD 0x80000000
-			MX25_PAD_UART1_CTS__UART1_CTS 0x80000000
-			MX25_PAD_UART1_RTS__UART1_RTS 0x80000000
-		>;
-	};
-
-	pinctrl_fec: fecgrp {
-		fsl,pins = <
-			MX25_PAD_D11__GPIO_4_9		0x80000000 /* FEC PHY power on pin */
-			MX25_PAD_D13__GPIO_4_7		0x80000000 /* FEC reset */
-			MX25_PAD_FEC_MDC__FEC_MDC	0x80000000
-			MX25_PAD_FEC_MDIO__FEC_MDIO	0x80000000
-			MX25_PAD_FEC_TDATA0__FEC_TDATA0	0x80000000
-			MX25_PAD_FEC_TDATA1__FEC_TDATA1	0x80000000
-			MX25_PAD_FEC_TX_EN__FEC_TX_EN	0x80000000
-			MX25_PAD_FEC_RDATA0__FEC_RDATA0	0x80000000
-			MX25_PAD_FEC_RDATA1__FEC_RDATA1	0x80000000
-			MX25_PAD_FEC_RX_DV__FEC_RX_DV	0x80000000
-			MX25_PAD_FEC_TX_CLK__FEC_TX_CLK	0x80000000
-		>;
-	};
-
-	pinctrl_nfc: nfcgrp {
-		fsl,pins = <
-			MX25_PAD_NF_CE0__NF_CE0		0x80000000
-			MX25_PAD_NFWE_B__NFWE_B		0x80000000
-			MX25_PAD_NFRE_B__NFRE_B		0x80000000
-			MX25_PAD_NFALE__NFALE		0x80000000
-			MX25_PAD_NFCLE__NFCLE		0x80000000
-			MX25_PAD_NFWP_B__NFWP_B		0x80000000
-			MX25_PAD_NFRB__NFRB		0x80000000
-			MX25_PAD_D7__D7			0x80000000
-			MX25_PAD_D6__D6			0x80000000
-			MX25_PAD_D5__D5			0x80000000
-			MX25_PAD_D4__D4			0x80000000
-			MX25_PAD_D3__D3			0x80000000
-			MX25_PAD_D2__D2			0x80000000
-			MX25_PAD_D1__D1			0x80000000
-			MX25_PAD_D0__D0			0x80000000
-		>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-reset-gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
-	phy-mode = "rmii";
-	phy-supply = <&reg_fec_phy>;
-	status = "okay";
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-on-flash-bbt;
-	nand-ecc-mode = "hw";
-	nand-bus-width = <8>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
deleted file mode 100644
index 0b8490b21a38..000000000000
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
- * and Markus Pargmann, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Phytec pca100";
-	compatible = "phytec,imx27-pca100", "fsl,imx27";
-
-	memory {
-		reg = <0xa0000000 0x08000000>; /* 128MB */
-	};
-};
-
-&cspi1 {
-	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
-		   <&gpio4 27 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	at24@52 {
-		compatible = "atmel,24c32";
-		pagesize = <32>;
-		reg = <0x52>;
-	};
-};
-
-&iomuxc {
-	imx27-phycard-s-som {
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
-				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
-				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
-				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
-				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
-				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
-				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
-				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
-				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
-				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
-				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
-				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
-				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
-				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
-				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
-				MX27_PAD_ATA_DATA13__FEC_COL 0x0
-				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
-				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
-				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
-			>;
-		};
-
-		pinctrl_nfc: nfcgrp {
-			fsl,pins = <
-				MX27_PAD_NFRB__NFRB 0x0
-				MX27_PAD_NFCLE__NFCLE 0x0
-				MX27_PAD_NFWP_B__NFWP_B 0x0
-				MX27_PAD_NFCE_B__NFCE_B 0x0
-				MX27_PAD_NFALE__NFALE 0x0
-				MX27_PAD_NFRE_B__NFRE_B 0x0
-				MX27_PAD_NFWE_B__NFWE_B 0x0
-			>;
-		};
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts
deleted file mode 100644
index 070e59cbdd8b..000000000000
--- a/arch/arm/boot/dts/imx28-apf28.dts
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Copyright 2012 Armadeus Systems - <support@armadeus.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Armadeus Systems APF28 module";
-	compatible = "armadeus,imx28-apf28", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0 0x300000>;
-				};
-
-				partition@300000 {
-					label = "env";
-					reg = <0x300000 0x80000>;
-				};
-
-				partition@380000 {
-					label = "env2";
-					reg = <0x380000 0x80000>;
-				};
-
-				partition@400000 {
-					label = "dtb";
-					reg = <0x400000 0x80000>;
-				};
-
-				partition@480000 {
-					label = "splash";
-					reg = <0x480000 0x80000>;
-				};
-
-				partition@500000 {
-					label = "kernel";
-					reg = <0x500000 0x800000>;
-				};
-
-				partition@d00000 {
-					label = "rootfs";
-					reg = <0xd00000 0xf300000>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
deleted file mode 100644
index c4fadbc1b400..000000000000
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * Copyright 2012 Armadeus Systems - <support@armadeus.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/* APF28Dev is a docking board for the APF28 SOM */
-#include "imx28-apf28.dts"
-
-/ {
-	model = "Armadeus Systems APF28Dev docking/development board";
-	compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: ssp@80014000 {
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_apf28dev>;
-
-				hog_pins_apf28dev: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D16__GPIO_1_16
-						MX28_PAD_LCD_D17__GPIO_1_17
-						MX28_PAD_LCD_D18__GPIO_1_18
-						MX28_PAD_LCD_D19__GPIO_1_19
-						MX28_PAD_LCD_D20__GPIO_1_20
-						MX28_PAD_LCD_D21__GPIO_1_21
-						MX28_PAD_LCD_D22__GPIO_1_22
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_apf28dev: lcdif-apf28dev@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_otg_apf28dev: otg-apf28dev@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D23__GPIO_1_23
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_16bit_pins_a
-						&lcdif_pins_apf28dev>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <16>;
-					bus-width = <16>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <33000033>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <96>;
-							hfront-porch = <96>;
-							vback-porch = <20>;
-							vfront-porch = <21>;
-							hsync-len = <64>;
-							vsync-len = <4>;
-							hsync-active = <1>;
-							vsync-active = <1>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				xceiver-supply = <&reg_can0_vcc>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				uart-has-rtscts;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_otg_apf28dev
-					&usb0_id_pins_b>;
-			vbus-supply = <&reg_usb0_vbus>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 23 1>;
-			enable-active-high;
-		};
-
-		reg_can0_vcc: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "can0_vcc";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio0 21 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-
-		pwms = <&pwm 3 191000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-button {
-			label = "User button";
-			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-			linux,code = <0x100>;
-			wakeup-source;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
deleted file mode 100644
index 1092b761d7ac..000000000000
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ /dev/null
@@ -1,226 +0,0 @@
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Bluegiga APX4 Development Kit";
-	compatible = "bluegiga,apx4devkit", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x04000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-			};
-
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: ssp@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-						MX28_PAD_GPMI_RDY1__GPIO_0_21
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_LCD_RESET__GPIO_3_30
-						MX28_PAD_JTAG_RTCK__GPIO_4_20
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_apx4: lcdif-apx4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA4__SSP2_D0
-						MX28_PAD_SSP0_DATA5__SSP2_D3
-						MX28_PAD_SSP0_DATA6__SSP2_CMD
-						MX28_PAD_SSP0_DATA7__SSP2_SCK
-						MX28_PAD_SSP2_SS1__SSP2_D1
-						MX28_PAD_SSP2_SS2__SSP2_D2
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 {
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__SSP2_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_apx4>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <88>;
-							hfront-porch = <40>;
-							vback-porch = <32>;
-							vfront-porch = <13>;
-							hsync-len = <48>;
-							vsync-len = <3>;
-							hsync-active = <1>;
-							vsync-active = <1>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				sgtl5000: codec@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				pcf8563: rtc@51 {
-					compatible = "phg,pcf8563";
-					reg = <0x51>;
-				};
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			auart1: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart1_2pins_a>;
-				status = "okay";
-			};
-
-			auart2: serial@8006e000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart2_2pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	sound {
-		compatible = "bluegiga,apx4devkit-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "apx4devkit-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio3 28 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
deleted file mode 100644
index 570aa339a05e..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright 2012 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Crystalfontz CFA-10036 Board";
-	compatible = "crystalfontz,cfa10036", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				ssd1306_cfa10036: ssd1306-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__GPIO_2_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins_cfa10036: leds-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__GPIO_3_4
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_otg_cfa10036: otg-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDY0__USB0_ID
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						0x31c3 /*
-						MX28_PAD_PWM3__GPIO_3_28 */
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-
-			};
-
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				bus-width = <4>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_b>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_b>;
-				clock-frequency = <400000>;
-				status = "okay";
-
-				ssd1306: oled@3c {
-					compatible = "solomon,ssd1306fb-i2c";
-					pinctrl-names = "default";
-					pinctrl-0 = <&ssd1306_cfa10036>;
-					reg = <0x3c>;
-					reset-gpios = <&gpio2 7 0>;
-					solomon,height = <32>;
-					solomon,width = <128>;
-					solomon,page-offset = <0>;
-					solomon,com-lrremap;
-					solomon,com-invdir;
-					solomon,com-offset = <32>;
-				};
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_otg_cfa10036>;
-			dr_mode = "peripheral";
-			phy_type = "utmi";
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_cfa10036>;
-
-		power {
-			gpios = <&gpio3 4 1>;
-			default-state = "on";
-		};
-	};
-
-	reg_vddio_sd0: vddio-sd0 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&mmc_pwr_cfa10036>;
-		regulator-name = "vddio-sd0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 28 0>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts
deleted file mode 100644
index 3d13b321d27b..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10037.dts
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright 2012 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10037 Board";
-	compatible = "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10037: usb-10037@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_pins_cfa10037: mac0-10037@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS2__GPIO_2_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a
-				&mac0_pins_cfa10037>;
-			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10037>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
deleted file mode 100644
index 4cd52d53cf00..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ /dev/null
@@ -1,436 +0,0 @@
-/*
- * Copyright 2012 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10049 Board";
-	compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10049: usb-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				i2cmux_pins_cfa10049: i2cmux-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D22__GPIO_1_22
-						MX28_PAD_LCD_D23__GPIO_1_23
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_pins_cfa10049: mac0-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS2__GPIO_2_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				pca_pins_cfa10049: pca-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS0__GPIO_2_19
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				rotary_pins_cfa10049: rotary-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_I2C0_SCL__GPIO_3_24
-						MX28_PAD_I2C0_SDA__GPIO_3_25
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF1_SDATA0__GPIO_3_26
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				spi2_pins_cfa10049: spi2-cfa10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				spi3_pins_cfa10049: spi3-cfa10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDN__GPIO_0_24
-						MX28_PAD_GPMI_RESETN__GPIO_0_28
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-						MX28_PAD_GPMI_ALE__GPIO_0_26
-						MX28_PAD_GPMI_CLE__GPIO_0_27
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10049: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				w1_gpio_pins: w1-gpio@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D21__GPIO_1_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10049
-					     &lcdif_pins_cfa10049
-					     &lcdif_pins_cfa10049_pullup>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <9216000>;
-							hactive = <320>;
-							vactive = <480>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <15>;
-							vsync-len = <15>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-
-			i2c1: i2c@8005a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c1_pins_a>;
-				status = "okay";
-			};
-
-			i2cmux {
-				compatible = "i2c-mux-gpio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2cmux_pins_cfa10049>;
-				mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
-				i2c-parent = <&i2c1>;
-
-				i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-
-					adc0: nau7802@2a {
-						compatible = "nuvoton,nau7802";
-						reg = <0x2a>;
-						nuvoton,vldo = <3000>;
-					};
-				};
-
-				i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-
-					adc1: nau7802@2a {
-						compatible = "nuvoton,nau7802";
-						reg = <0x2a>;
-						nuvoton,vldo = <3000>;
-					};
-				};
-
-				i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-
-					adc2: nau7802@2a {
-						compatible = "nuvoton,nau7802";
-						reg = <0x2a>;
-						nuvoton,vldo = <3000>;
-					};
-				};
-
-				i2c@3 {
-					reg = <3>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					pca9555: pca9555@20 {
-						compatible = "nxp,pca9555";
-						pinctrl-names = "default";
-						pinctrl-0 = <&pca_pins_cfa10049>;
-						interrupt-parent = <&gpio2>;
-						interrupts = <19 0x2>;
-						gpio-controller;
-						#gpio-cells = <2>;
-						interrupt-controller;
-						#interrupt-cells = <2>;
-						reg = <0x20>;
-					};
-				};
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10049>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a
-				&mac0_pins_cfa10049>;
-			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	spi2 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_pins_cfa10049>;
-		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
-		cs-gpios = <&gpio3 5 0>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hx8357: hx8357@0 {
-			compatible = "himax,hx8357b", "himax,hx8357";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-			gpios-reset = <&gpio3 30 0>;
-			im-gpios = <&gpio5 4 0 &gpio5 5 0 &gpio5 6 0>;
-		};
-	};
-
-	spi3 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi3_pins_cfa10049>;
-		status = "okay";
-		gpio-sck = <&gpio0 24 0>;
-		gpio-mosi = <&gpio0 28 0>;
-		cs-gpios = <&gpio0 17 0 &gpio0 26 0 &gpio0 27 0>;
-		num-chipselects = <3>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio5: gpio5@0 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0>;
-			registers-number = <2>;
-			spi-max-frequency = <100000>;
-		};
-
-		gpio6: gpio6@1 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <1>;
-			registers-number = <4>;
-			spi-max-frequency = <100000>;
-		};
-
-		dac0: dh2228@2 {
-			compatible = "rohm,dh2228fv";
-			reg = <2>;
-			spi-max-frequency = <100000>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&rotary_btn_pins_cfa10049>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rotary_button {
-			label = "rotary_button";
-			gpios = <&gpio3 26 1>;
-			debounce-interval = <10>;
-			linux,code = <28>;
-		};
-	};
-
-	rotary {
-		compatible = "rotary-encoder";
-		pinctrl-names = "default";
-		pinctrl-0 = <&rotary_pins_cfa10049>;
-		gpios = <&gpio3 24 1>, <&gpio3 25 1>;
-		linux,axis = <1>; /* REL_Y */
-		rotary-encoder,relative-axis;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-
-	};
-
-	onewire {
-		compatible = "w1-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&w1_gpio_pins>;
-		status = "okay";
-		gpios = <&gpio1 21 0>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts
deleted file mode 100644
index 6a34114bec29..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10055.dts
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * Copyright 2013 Crystalfontz America, Inc.
- * 				  Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * The CFA-10055 is an expansion board for the CFA-10036 module and
- * CFA-10037, thus we need to include the CFA-10037 DTS.
- */
-#include "imx28-cfa10037.dts"
-
-/ {
-	model = "Crystalfontz CFA-10055 Board";
-	compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				spi2_pins_cfa10055: spi2-cfa10055@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10055: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10055
-					     &lcdif_pins_cfa10055
-					     &lcdif_pins_cfa10055_pullup>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <9216000>;
-							hactive = <320>;
-							vactive = <480>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <15>;
-							vsync-len = <15>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-		};
-	};
-
-	spi2 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_pins_cfa10055>;
-		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
-		cs-gpios = <&gpio3 5 0>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hx8357: hx8357@0 {
-			compatible = "himax,hx8357b", "himax,hx8357";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-			gpios-reset = <&gpio3 30 0>;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts
deleted file mode 100644
index ba6495ca44d2..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10056.dts
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright 2013 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * The CFA-10055 is an expansion board for the CFA-10036 module and
- * CFA-10037, thus we need to include the CFA-10037 DTS.
- */
-#include "imx28-cfa10037.dts"
-
-/ {
-	model = "Crystalfontz CFA-10056 Board";
-	compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				spi2_pins_cfa10056: spi2-cfa10056@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_pins_cfa10056: lcdif-10056@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-						&lcdif_pins_cfa10056
-						&lcdif_pins_cfa10056_pullup >;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <32000000>;
-							hactive = <480>;
-							vactive = <800>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <5>;
-							vsync-len = <5>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	spi2 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_pins_cfa10056>;
-		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
-		cs-gpios = <&gpio3 5 0>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hx8369: hx8369@0 {
-			compatible = "himax,hx8369a", "himax,hx8369";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-			gpios-reset = <&gpio3 30 0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
deleted file mode 100644
index c6067915b238..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Copyright 2013 Crystalfontz America, Inc.
- * Copyright 2012 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * The CFA-10057 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10057 Board";
-	compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10057: usb-10057@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10057: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10057
-					     &lcdif_pins_cfa10057>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <480>;
-							vactive = <800>;
-							hfront-porch = <12>;
-							hback-porch = <2>;
-							vfront-porch = <5>;
-							vback-porch = <3>;
-							hsync-len = <2>;
-							vsync-len = <2>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm4_pins_a>;
-				status = "okay";
-			};
-
-			i2c1: i2c@8005a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c1_pins_a>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10057>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 4 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts
deleted file mode 100644
index 70c7bb4a5a0e..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10058.dts
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright 2013 Crystalfontz America, Inc.
- * Copyright 2013 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * The CFA-10058 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10058 Board";
-	compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10058: usb-10058@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10058: lcdif-10058@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-						 &lcdif_pins_cfa10058>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <40>;
-							hfront-porch = <40>;
-							vback-porch = <13>;
-							vfront-porch = <29>;
-							hsync-len = <8>;
-							vsync-len = <8>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10058>;
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/imx28-duckbill-2-485.dts
deleted file mode 100644
index bd3fd470f9c3..000000000000
--- a/arch/arm/boot/dts/imx28-duckbill-2-485.dts
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill 2 485";
-	compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-				non-removable;
-			};
-
-			ssp2: ssp@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_b
-					&mmc2_cd_cfg &mmc2_sck_cfg_b>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_int_pin: mac0-phy-int@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: leds@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__GPIO_3_20
-						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-						MX28_PAD_I2C0_SCL__GPIO_3_24
-						MX28_PAD_I2C0_SDA__GPIO_3_25
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			phy-handle = <&ethphy>;
-			status = "okay";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethphy: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&mac0_phy_int_pin>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-					max-speed = <100>;
-				};
-			};
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		rs485-red {
-			label = "duckbill:red:rs485";
-			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-		};
-
-		rs485-green {
-			label = "duckbill:green:rs485";
-			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
deleted file mode 100644
index 4450047885eb..000000000000
--- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill 2 EnOcean";
-	compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-				non-removable;
-			};
-
-			ssp2: ssp@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_b
-					&mmc2_cd_cfg &mmc2_sck_cfg_b>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_int_pin: mac0-phy-int@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: leds@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__GPIO_3_20
-						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-						MX28_PAD_AUART0_CTS__GPIO_3_2
-						MX28_PAD_I2C0_SCL__GPIO_3_24
-						MX28_PAD_I2C0_SDA__GPIO_3_25
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				enocean_button: enocean-button@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_RTS__GPIO_3_3
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			phy-handle = <&ethphy>;
-			status = "okay";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethphy: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&mac0_phy_int_pin>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-					max-speed = <100>;
-				};
-			};
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		enocean-blue {
-			label = "duckbill:blue:enocean";
-			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-		};
-
-		enocean-red {
-			label = "duckbill:red:enocean";
-			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-		};
-
-		enocean-green {
-			label = "duckbill:green:enocean";
-			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&enocean_button>;
-
-		enocean {
-			label = "EnOcean";
-			linux,code = <KEY_NEW>;
-			gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
deleted file mode 100644
index 927732efca98..000000000000
--- a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill 2 SPI";
-	compatible = "i2se,duckbill-2-spi", "i2se,duckbill-2", "fsl,imx28";
-
-	aliases {
-		ethernet1 = &qca7000;
-	};
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-				non-removable;
-			};
-
-			ssp2: ssp@80014000 {
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				qca7000: ethernet@0 {
-					reg = <0>;
-					compatible = "qca,qca7000";
-					pinctrl-names = "default";
-					pinctrl-0 = <&qca7000_pins>;
-					interrupt-parent = <&gpio3>;
-					interrupts = <3 IRQ_TYPE_EDGE_RISING>;
-					spi-cpha;
-					spi-cpol;
-					spi-max-frequency = <8000000>;
-				};
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_int_pin: mac0-phy-int@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: led@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__GPIO_3_20
-						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				qca7000_pins: qca7000@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_RTS__GPIO_3_3    /* Interrupt */
-						MX28_PAD_LCD_D13__GPIO_1_13      /* QCA7K reset */
-						MX28_PAD_LCD_D14__GPIO_1_14      /* GPIO 0 */
-						MX28_PAD_LCD_D15__GPIO_1_15      /* GPIO 1 */
-						MX28_PAD_LCD_D18__GPIO_1_18      /* GPIO 2 */
-						MX28_PAD_LCD_D21__GPIO_1_21      /* GPIO 3 */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			phy-handle = <&ethphy>;
-			status = "okay";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethphy: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&mac0_phy_int_pin>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-					max-speed = <100>;
-				};
-			};
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2.dts b/arch/arm/boot/dts/imx28-duckbill-2.dts
deleted file mode 100644
index 7fa3d759505c..000000000000
--- a/arch/arm/boot/dts/imx28-duckbill-2.dts
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill 2";
-	compatible = "i2se,duckbill-2", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-				non-removable;
-			};
-
-			ssp2: ssp@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_b
-					&mmc2_cd_cfg &mmc2_sck_cfg_b>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_int_pin: mac0-phy-int@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: leds@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__GPIO_3_20
-						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			phy-handle = <&ethphy>;
-			status = "okay";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethphy: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&mac0_phy_int_pin>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-					max-speed = <100>;
-				};
-			};
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts
deleted file mode 100644
index 3e4385d4ed78..000000000000
--- a/arch/arm/boot/dts/imx28-duckbill.dts
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * Copyright (C) 2013-2014,2016 Michael Heimpold <mhei@heimpold.de>
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill";
-	compatible = "i2se,duckbill", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			ssp2: ssp@80014000 {
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__GPIO_2_7    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: leds@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__GPIO_3_4
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			status = "okay";
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
deleted file mode 100644
index 7c1572c5a4fb..000000000000
--- a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/*
- * Module contains : i.MX282 + 64MB DDR2 + NAND + Ethernet PHY + RTC
- */
-
-/dts-v1/;
-#include "imx28-eukrea-mbmx28lc.dtsi"
-
-/ {
-	model = "Eukrea Electromatique MBMX283LC";
-	compatible = "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x04000000>;
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpmi_pins_a>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-
-	pcf8563: rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-
-&mac0 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac0_pins_a>;
-	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pinctrl{
-	pinctrl-names = "default";
-	pinctrl-0 = <&hog_pins_cpuimx283>;
-
-	hog_pins_cpuimx283: hog-cpuimx283@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-			MX28_PAD_ENET0_TX_CLK__GPIO_4_5
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_ENABLE>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
deleted file mode 100644
index b61fd61eb1c7..000000000000
--- a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/*
- * Module contains : i.MX287 + 128MB DDR2 + NAND + 2 x Ethernet PHY + RTC
- */
-
-#include "imx28-eukrea-mbmx283lc.dts"
-
-/ {
-	model = "Eukrea Electromatique MBMX287LC";
-	compatible = "eukrea,mbmx287lc", "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-};
-
-&mac1 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac1_pins_a>;
-	phy-reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hog_pins_cpuimx283 &hog_pins_cpuimx287>;
-	hog_pins_cpuimx287: hog-cpuimx287@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_SPDIF__GPIO_3_27
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_ENABLE>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
deleted file mode 100644
index 581e85f4fd4c..000000000000
--- a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
+++ /dev/null
@@ -1,330 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "Eukrea Electromatique MBMX28LC";
-	compatible = "eukrea,mbmx28lc", "fsl,imx28";
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 4 1000000>;
-		brightness-levels = <0 25 50 75 100 125 150 175 200 225 255>;
-		default-brightness-level = <10>;
-	};
-
-	button-sw3 {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_button_sw3_pins_mbmx28lc>;
-
-		sw3 {
-			label = "SW3";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			wakeup-source;
-		};
-	};
-
-	button-sw4 {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_button_sw4_pins_mbmx28lc>;
-
-		sw4 {
-			label = "SW4";
-			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			wakeup-source;
-		};
-	};
-
-	led-d6 {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_d6_pins_mbmx28lc>;
-
-		led1 {
-			label = "d6";
-			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	led-d7 {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_d7_pins_mbmx28lc>;
-
-		led1 {
-			label = "d7";
-			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_lcd_3v3: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&reg_lcd_3v3_pins_mbmx28lc>;
-			regulator-name = "lcd-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb0_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&reg_usb0_vbus_pins_mbmx28lc>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&reg_usb1_vbus_pins_mbmx28lc>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx28-mbmx28lc-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "imx28-mbmx28lc-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-};
-
-&duart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&duart_4pins_a>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-
-	sgtl5000: codec@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-		clocks = <&saif0>;
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcdif_18bit_pins_a &lcdif_pins_mbmx28lc>;
-	lcd-supply = <&reg_lcd_3v3>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		model = "43WVF1G-0";
-		bits-per-pixel = <16>;
-		bus-width = <18>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <9072000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <10>;
-				hfront-porch = <5>;
-				vback-porch = <8>;
-				vfront-porch = <8>;
-				hsync-len = <40>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&lradc {
-	fsl,lradc-touchscreen-wires = <4>;
-	status = "okay";
-};
-
-&pinctrl {
-	gpio_button_sw3_pins_mbmx28lc: gpio-button-sw3-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D21__GPIO_1_21
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	gpio_button_sw4_pins_mbmx28lc: gpio-button-sw4-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D20__GPIO_1_20
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	lcdif_pins_mbmx28lc: lcdif-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_VSYNC__LCD_VSYNC
-			MX28_PAD_LCD_HSYNC__LCD_HSYNC
-			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
-			MX28_PAD_LCD_ENABLE__LCD_ENABLE
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	led_d6_pins_mbmx28lc: led-d6-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D23__GPIO_1_23
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	led_d7_pins_mbmx28lc: led-d7-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D22__GPIO_1_22
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	reg_lcd_3v3_pins_mbmx28lc: lcd-3v3-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_RESET__GPIO_3_30
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	reg_usb0_vbus_pins_mbmx28lc: reg-usb0-vbus-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D18__GPIO_1_18
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	reg_usb1_vbus_pins_mbmx28lc: reg-usb1-vbus-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D19__GPIO_1_19
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm4_pins_a>;
-	status = "okay";
-};
-
-&saif0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif0_pins_a>;
-	status = "okay";
-};
-
-&saif1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif1_pins_a>;
-	fsl,saif-master = <&saif0>;
-	status = "okay";
-};
-
-&ssp0 {
-	compatible = "fsl,imx28-mmc";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_cd_cfg &mmc0_sck_cfg>;
-	bus-width = <4>;
-	cd-inverted;
-	status = "okay";
-};
-
-&usb0 {
-	disable-over-current;
-	vbus-supply = <&reg_usb0_vbus>;
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_pins_b>;
-};
-
-&usb1 {
-	vbus-supply = <&reg_usb1_vbus>;
-	status = "okay";
-};
-
-&usbphy0 {
-	status = "okay";
-};
-
-&usbphy1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
deleted file mode 100644
index 5309bb90d7d5..000000000000
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ /dev/null
@@ -1,378 +0,0 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Freescale i.MX28 Evaluation Kit";
-	compatible = "fsl,imx28-evk", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
-					     &gpmi_pins_evk>;
-				status = "okay";
-			};
-
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				wp-gpios = <&gpio2 12 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp1: ssp@80012000 {
-				compatible = "fsl,imx28-mmc";
-				bus-width = <8>;
-				wp-gpios = <&gpio0 28 0>;
-			};
-
-			ssp2: ssp@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: m25p80@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "sst,sst25vf016b", "jedec,spi-nor";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP1_CMD__GPIO_2_13
-						MX28_PAD_SSP1_DATA3__GPIO_2_15
-						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-						MX28_PAD_SSP1_SCK__GPIO_2_12
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_LCD_RESET__GPIO_3_30
-						MX28_PAD_AUART2_RX__GPIO_3_8
-						MX28_PAD_AUART2_TX__GPIO_3_9
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pin_gpio3_5: led_gpio3_5@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				gpmi_pins_evk: gpmi-nand-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_CE1N__GPMI_CE1N
-						MX28_PAD_GPMI_RDY1__GPMI_READY1
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_evk: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_evk>;
-				lcd-supply = <&reg_lcd_3v3>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <33500000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <89>;
-							hfront-porch = <164>;
-							vback-porch = <23>;
-							vfront-porch = <10>;
-							hsync-len = <10>;
-							vsync-len = <10>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				xceiver-supply = <&reg_can_3v3>;
-				status = "okay";
-			};
-
-			can1: can@80034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can1_pins_a>;
-				xceiver-supply = <&reg_can_3v3>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-				fsl,ave-ctrl = <4>;
-				fsl,ave-delay = <2>;
-				fsl,settling = <10>;
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				sgtl5000: codec@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				at24@51 {
-					compatible = "atmel,24c32";
-					pagesize = <32>;
-					reg = <0x51>;
-				};
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm2_pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				uart-has-rtscts;
-				status = "okay";
-			};
-
-			auart3: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart3_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_id_pins_a>;
-			vbus-supply = <&reg_usb0_vbus>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-supply = <&reg_fec_3v3>;
-			phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_vddio_sd0: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 28 0>;
-		};
-
-		reg_fec_3v3: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "fec-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 15 0>;
-		};
-
-		reg_usb0_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 9 0>;
-			enable-active-high;
-		};
-
-		reg_usb1_vbus: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 8 0>;
-			enable-active-high;
-		};
-
-		reg_lcd_3v3: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "lcd-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 30 0>;
-			enable-active-high;
-		};
-
-		reg_can_3v3: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "can-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 13 0>;
-			enable-active-high;
-		};
-
-	};
-
-	sound {
-		compatible = "fsl,imx28-evk-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "imx28-evk-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio3_5>;
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio3 5 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 2 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi
deleted file mode 100644
index a69856e41ba4..000000000000
--- a/arch/arm/boot/dts/imx28-m28.dtsi
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Copyright (C) 2014 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "imx28.dtsi"
-
-/ {
-	model = "Aries/DENX M28";
-	compatible = "aries,m28", "denx,m28", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				rtc: rtc@68 {
-					compatible = "st,m41t62";
-					reg = <0x68>;
-				};
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
deleted file mode 100644
index 9d6c8fe28d74..000000000000
--- a/arch/arm/boot/dts/imx28-m28cu3.dts
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * Copyright (C) 2013 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "MSR M28CU3";
-	compatible = "msr,m28cu3", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-
-				partition@0 {
-					label = "gpmi-nfc-0-boot";
-					reg = <0x00000000 0x01400000>;
-					read-only;
-				};
-
-				partition@1 {
-					label = "gpmi-nfc-general-use";
-					reg = <0x01400000 0x0ec00000>;
-				};
-			};
-
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					     &mmc0_cd_cfg
-					     &mmc0_sck_cfg>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp2: ssp@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_a
-					     &mmc2_cd_cfg
-					     &mmc2_sck_cfg_a>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd1>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS0__GPIO_2_19
-						MX28_PAD_PWM4__GPIO_3_29
-						MX28_PAD_AUART2_RX__GPIO_3_8
-						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_m28: lcdif-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_VSYNC__LCD_VSYNC
-						MX28_PAD_LCD_HSYNC__LCD_HSYNC
-						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
-						MX28_PAD_LCD_RESET__LCD_RESET
-						MX28_PAD_LCD_CS__LCD_ENABLE
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins_gpio: leds-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP3_MISO__GPIO_2_26
-						MX28_PAD_SSP3_SCK__GPIO_2_24
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			ocotp@8002c000 {
-				status = "okay";
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_m28>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <6410256>;
-							hactive = <320>;
-							vactive = <240>;
-							hback-porch = <38>;
-							hfront-porch = <20>;
-							vback-porch = <15>;
-							vfront-porch = <5>;
-							hsync-len = <30>;
-							vsync-len = <3>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_b>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			auart3: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart3_2pins_b>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb1_pins_a>;
-			disable-over-current;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_gpio>;
-
-		user1 {
-			label = "sd0-led";
-			gpios = <&gpio2 26 0>;
-			linux,default-trigger = "mmc0";
-		};
-
-		user2 {
-			label = "sd1-led";
-			gpios = <&gpio2 24 0>;
-			linux,default-trigger = "mmc2";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_vddio_sd0: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 29 0>;
-		};
-
-		reg_vddio_sd1: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "vddio-sd1";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 19 0>;
-		};
-
-		reg_usb1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 8 0>;
-			enable-active-high;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
deleted file mode 100644
index dbfb8aab505f..000000000000
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ /dev/null
@@ -1,275 +0,0 @@
-/*
- * Copyright (C) 2012 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx28-m28.dtsi"
-
-/ {
-	model = "Aries/DENX M28EVK";
-	compatible = "aries,m28evk", "denx,m28evk", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					     &mmc0_cd_cfg
-					     &mmc0_sck_cfg>;
-				bus-width = <8>;
-				wp-gpios = <&gpio3 10 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp2: ssp@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: m25p80@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "m25p80", "jedec,spi-nor";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_AUART2_CTS__GPIO_3_10
-						MX28_PAD_AUART2_RTS__GPIO_3_11
-						MX28_PAD_AUART3_RX__GPIO_3_12
-						MX28_PAD_AUART3_TX__GPIO_3_13
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_m28: lcdif-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
-						MX28_PAD_LCD_ENABLE__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_m28>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <16>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <33260000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <0>;
-							hfront-porch = <256>;
-							vback-porch = <0>;
-							vfront-porch = <45>;
-							hsync-len = <1>;
-							vsync-len = <1>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				status = "okay";
-			};
-
-			can1: can@80034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can1_pins_a>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				sgtl5000: codec@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				eeprom: eeprom@51 {
-					compatible = "atmel,24c128";
-					reg = <0x51>;
-					pagesize = <32>;
-				};
-			};
-
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			auart1: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart1_pins_a>;
-				status = "okay";
-			};
-
-			auart2: serial@8006e000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart2_2pins_b>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm4_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			vbus-supply = <&reg_usb0_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_pins_a>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb1_pins_a>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			clocks = <&clks 57>, <&clks 57>;
-			clock-names = "ipg", "ahb";
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 4 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	regulators {
-		reg_vddio_sd0: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 28 0>;
-		};
-
-		reg_usb0_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 12 0>;
-		};
-
-		reg_usb1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 13 0>;
-		};
-	};
-
-	sound {
-		compatible = "denx,m28evk-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "m28evk-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
deleted file mode 100644
index 0ce3cb8e7914..000000000000
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Copyright (C) 2012 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "SchulerControl GmbH, SC SPS 1";
-	compatible = "schulercontrol,imx28-sps1", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog-gpios@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D00__GPIO_0_0
-						MX28_PAD_GPMI_D03__GPIO_0_3
-						MX28_PAD_GPMI_D06__GPIO_0_6
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-			};
-
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: ssp@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: m25p80@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "everspin,mr25h256", "mr25h256";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				rtc: rtc@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-				};
-
-				eeprom: eeprom@52 {
-					compatible = "atmel,24c64";
-					reg = <0x52>;
-					pagesize = <32>;
-				};
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			vbus-supply = <&reg_usb0_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_pins_b>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 9 0>;
-		};
-	};
-
-	leds {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "gpio-leds";
-		status = "okay";
-
-		led@1 {
-			label = "sps1-1:yellow:user";
-			gpios = <&gpio0 6 0>;
-			linux,default-trigger = "heartbeat";
-			reg = <0>;
-		};
-
-		led@2 {
-			label = "sps1-2:red:user";
-			gpios = <&gpio0 3 0>;
-			linux,default-trigger = "heartbeat";
-			reg = <1>;
-		};
-
-		led@3 {
-			label = "sps1-3:red:user";
-			gpios = <&gpio0 0 0>;
-			default-trigger = "heartbeat";
-			reg = <2>;
-		};
-
-	};
-};
diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts
deleted file mode 100644
index ae6cebbed84b..000000000000
--- a/arch/arm/boot/dts/imx31-bug.dts
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx31.dtsi"
-
-/ {
-	model = "Buglabs i.MX31 Bug 1.x";
-	compatible = "buglabs,imx31-bug", "fsl,imx31";
-
-	memory {
-		reg = <0x80000000 0x8000000>; /* 128M */
-	};
-};
-
-&uart5 {
-	uart-has-rtscts;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
deleted file mode 100644
index a72031407ebd..000000000000
--- a/arch/arm/boot/dts/imx31.dtsi
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	/*
-	 * The decompressor and also some bootloaders rely on a
-	 * pre-existing /chosen node to be available to insert the
-	 * command line and merge other ATAGS info.
-	 * Also for U-Boot there must be a pre-existing /memory node.
-	 */
-	chosen {};
-	memory { device_type = "memory"; reg = <0 0>; };
-
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm1136jf-s";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	avic: interrupt-controller@68000000 {
-		compatible = "fsl,imx31-avic", "fsl,avic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x68000000 0x100000>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&avic>;
-		ranges;
-
-		aips@43f00000 { /* AIPS1 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x43f00000 0x100000>;
-			ranges;
-
-			uart1: serial@43f90000 {
-				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-				reg = <0x43f90000 0x4000>;
-				interrupts = <45>;
-				clocks = <&clks 10>, <&clks 30>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart2: serial@43f94000 {
-				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-				reg = <0x43f94000 0x4000>;
-				interrupts = <32>;
-				clocks = <&clks 10>, <&clks 31>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			kpp: kpp@43fa8000 {
-				compatible = "fsl,imx31-kpp", "fsl,imx21-kpp";
-				reg = <0x43fa8000 0x4000>;
-				interrupts = <24>;
-				clocks = <&clks 46>;
-				status = "disabled";
-			};
-
-			uart4: serial@43fb0000 {
-				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-				reg = <0x43fb0000 0x4000>;
-				clocks = <&clks 10>, <&clks 49>;
-				clock-names = "ipg", "per";
-				interrupts = <46>;
-				status = "disabled";
-			};
-
-			uart5: serial@43fb4000 {
-				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-				reg = <0x43fb4000 0x4000>;
-				interrupts = <47>;
-				clocks = <&clks 10>, <&clks 50>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-		};
-
-		spba@50000000 {
-			compatible = "fsl,spba-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x50000000 0x100000>;
-			ranges;
-
-			uart3: serial@5000c000 {
-				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-				reg = <0x5000c000 0x4000>;
-				interrupts = <18>;
-				clocks = <&clks 10>, <&clks 48>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			iim: iim@5001c000 {
-				compatible = "fsl,imx31-iim", "fsl,imx27-iim";
-				reg = <0x5001c000 0x1000>;
-				interrupts = <19>;
-				clocks = <&clks 25>;
-			};
-		};
-
-		aips@53f00000 { /* AIPS2 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x53f00000 0x100000>;
-			ranges;
-
-			clks: ccm@53f80000{
-				compatible = "fsl,imx31-ccm";
-				reg = <0x53f80000 0x4000>;
-				interrupts = <31>, <53>;
-				#clock-cells = <1>;
-			};
-
-			gpt: timer@53f90000 {
-				compatible = "fsl,imx31-gpt";
-				reg = <0x53f90000 0x4000>;
-				interrupts = <29>;
-				clocks = <&clks 10>, <&clks 22>;
-				clock-names = "ipg", "per";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
deleted file mode 100644
index 9c2b715ab8bf..000000000000
--- a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include "imx35.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX35";
-	compatible = "eukrea,cpuimx35", "fsl,imx35";
-
-	memory {
-		reg = <0x80000000 0x8000000>; /* 128M */
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	tsc2007: tsc2007@48 {
-		compatible = "ti,tsc2007";
-		gpios = <&gpio3 2 0>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <0x2 0x8>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc2007_1>;
-		reg = <0x48>;
-		ti,x-plate-ohms = <180>;
-	};
-};
-
-&iomuxc {
-	imx35-eukrea {
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX35_PAD_FEC_TX_CLK__FEC_TX_CLK		0x80000000
-				MX35_PAD_FEC_RX_CLK__FEC_RX_CLK		0x80000000
-				MX35_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
-				MX35_PAD_FEC_COL__FEC_COL		0x80000000
-				MX35_PAD_FEC_RDATA0__FEC_RDATA_0	0x80000000
-				MX35_PAD_FEC_TDATA0__FEC_TDATA_0	0x80000000
-				MX35_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX35_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX35_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX35_PAD_FEC_TX_ERR__FEC_TX_ERR		0x80000000
-				MX35_PAD_FEC_RX_ERR__FEC_RX_ERR		0x80000000
-				MX35_PAD_FEC_CRS__FEC_CRS		0x80000000
-				MX35_PAD_FEC_RDATA1__FEC_RDATA_1	0x80000000
-				MX35_PAD_FEC_TDATA1__FEC_TDATA_1	0x80000000
-				MX35_PAD_FEC_RDATA2__FEC_RDATA_2	0x80000000
-				MX35_PAD_FEC_TDATA2__FEC_TDATA_2	0x80000000
-				MX35_PAD_FEC_RDATA3__FEC_RDATA_3	0x80000000
-				MX35_PAD_FEC_TDATA3__FEC_TDATA_3	0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX35_PAD_I2C1_CLK__I2C1_SCL		0x80000000
-				MX35_PAD_I2C1_DAT__I2C1_SDA		0x80000000
-			>;
-		};
-
-		pinctrl_tsc2007_1: tsc2007grp-1 {
-			fsl,pins = <MX35_PAD_ATA_DA2__GPIO3_2 0x80000000>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
deleted file mode 100644
index e9357131b026..000000000000
--- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx35-eukrea-cpuimx35.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX35";
-	compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_bp1>;
-
-		bp1 {
-			label = "BP1";
-			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			wakeup-source;
-			linux,input-type = <1>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led1>;
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	sound {
-		compatible = "eukrea,asoc-tlv320";
-		eukrea,model = "imx35-eukrea-tlv320aic23";
-		ssi-controller = <&ssi1>;
-		fsl,mux-int-port = <1>;
-		fsl,mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio3 24>;
-	status = "okay";
-};
-
-&i2c1 {
-	tlv320aic23: codec@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-	};
-};
-
-&iomuxc {
-	imx35-eukrea {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS	0x80000000
-				MX35_PAD_STXD4__AUDMUX_AUD4_TXD		0x80000000
-				MX35_PAD_SRXD4__AUDMUX_AUD4_RXD		0x80000000
-				MX35_PAD_SCK4__AUDMUX_AUD4_TXC		0x80000000
-			>;
-		};
-
-		pinctrl_bp1: bp1grp {
-			fsl,pins = <MX35_PAD_LD19__GPIO3_25  0x80000000>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
-				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
-				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
-				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
-				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
-				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
-				MX35_PAD_LD18__GPIO3_24			0x80000000 /* CD */
-			>;
-		};
-
-		pinctrl_led1: led1grp {
-			fsl,pins = <MX35_PAD_LD23__GPIO3_29  0x80000000>;
-		};
-
-		pinctrl_reg_lcd_3v3: reg-lcd-3v3 {
-			fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
-				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
-				MX35_PAD_CTS1__UART1_CTS		0x1c5
-				MX35_PAD_RTS1__UART1_RTS		0x1c5
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX35_PAD_RXD2__UART2_RXD_MUX		0x1c5
-				MX35_PAD_TXD2__UART2_TXD_MUX		0x1c5
-				MX35_PAD_RTS2__UART2_RTS		0x1c5
-				MX35_PAD_CTS2__UART2_CTS		0x1c5
-			>;
-		};
-	};
-};
-
-&ssi1 {
-	codec-handle = <&tlv320aic23>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbhost1 {
-	phy_type = "serial";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	phy_type = "utmi";
-	dr_mode = "otg";
-	external-vbus-divider;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx35-pdk.dts b/arch/arm/boot/dts/imx35-pdk.dts
deleted file mode 100644
index 9bb628f22502..000000000000
--- a/arch/arm/boot/dts/imx35-pdk.dts
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- * Copyright 2014 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx35.dtsi"
-
-/ {
-	model = "Freescale i.MX35 Product Development Kit";
-	compatible = "fsl,imx35-pdk", "fsl,imx35";
-
-	memory {
-		reg = <0x80000000 0x8000000>,
-		      <0x90000000 0x8000000>;
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx35-pdk {
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
-				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
-				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
-				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
-				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
-				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
-				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
-				MX35_PAD_CTS1__UART1_CTS		0x1c5
-				MX35_PAD_RTS1__UART1_RTS		0x1c5
-			>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <16>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts
deleted file mode 100644
index 98b5faa06e27..000000000000
--- a/arch/arm/boot/dts/imx50-evk.dts
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx50.dtsi"
-
-/ {
-	model = "Freescale i.MX50 Evaluation Kit";
-	compatible = "fsl,imx50-evk", "fsl,imx50";
-
-	memory {
-		reg = <0x70000000 0x80000000>;
-	};
-};
-
-&cspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi>;
-	cs-gpios = <&gpio4 11 0>, <&gpio4 13 0>;
-	status = "okay";
-
-	flash: m25p32@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "m25p32", "jedec,spi-nor";
-		spi-max-frequency = <25000000>;
-		reg = <1>;
-
-		partition@0 {
-			label = "bootloader";
-			reg = <0x0 0x100000>;
-			read-only;
-		};
-
-		partition@100000 {
-			label = "kernel";
-			reg = <0x100000 0x300000>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx50-evk {
-		pinctrl_cspi: cspigrp {
-			fsl,pins = <
-				MX50_PAD_CSPI_SCLK__CSPI_SCLK		0x00
-				MX50_PAD_CSPI_MISO__CSPI_MISO		0x00
-				MX50_PAD_CSPI_MOSI__CSPI_MOSI		0x00
-				MX50_PAD_CSPI_SS0__GPIO4_11		0xc4
-				MX50_PAD_ECSPI1_MOSI__CSPI_SS1		0xf4
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX50_PAD_SSI_RXFS__FEC_MDC		0x80
-				MX50_PAD_SSI_RXC__FEC_MDIO		0x80
-				MX50_PAD_DISP_D0__FEC_TX_CLK		0x80
-				MX50_PAD_DISP_D1__FEC_RX_ERR		0x80
-				MX50_PAD_DISP_D2__FEC_RX_DV		0x80
-				MX50_PAD_DISP_D3__FEC_RDATA_1		0x80
-				MX50_PAD_DISP_D4__FEC_RDATA_0		0x80
-				MX50_PAD_DISP_D5__FEC_TX_EN		0x80
-				MX50_PAD_DISP_D6__FEC_TDATA_1		0x80
-				MX50_PAD_DISP_D7__FEC_TDATA_0		0x80
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX50_PAD_UART1_TXD__UART1_TXD_MUX	0x1e4
-				MX50_PAD_UART1_RXD__UART1_RXD_MUX	0x1e4
-				MX50_PAD_UART1_RTS__UART1_RTS		0x1e4
-				MX50_PAD_UART1_CTS__UART1_CTS		0x1e4
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbh2 {
-	status = "okay";
-};
-
-&usbh3 {
-	status = "okay";
-};
-
-&usbotg {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts
deleted file mode 100644
index c83ac1600322..000000000000
--- a/arch/arm/boot/dts/imx51-apf51.dts
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright 2012 Armadeus Systems - <support@armadeus.com>
- * Copyright 2012 Laurent Cans <laurent.cans@gmail.com>
- *
- * Based on mx51-babbage.dts
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx51.dtsi"
-
-/ {
-	model = "Armadeus Systems APF51 module";
-	compatible = "armadeus,imx51-apf51", "fsl,imx51";
-
-	memory {
-		reg = <0x90000000 0x20000000>;
-	};
-
-	clocks {
-		osc {
-			clock-frequency = <33554432>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "mii";
-	phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx51-apf51 {
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
-				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
-				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
-				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
-				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
-				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
-				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
-				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
-				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
-				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
-				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
-				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
-				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
-				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
-				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
-				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
-				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
-			>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
deleted file mode 100644
index a5e6091c8729..000000000000
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * Copyright 2013 Armadeus Systems - <support@armadeus.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/* APF51Dev is a docking board for the APF51 SOM */
-#include "imx51-apf51.dts"
-
-/ {
-	model = "Armadeus Systems APF51Dev docking/development board";
-	compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51";
-
-	backlight@bl1{
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		compatible = "gpio-backlight";
-		gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
-		default-on;
-	};
-
-	display@di1 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp1>;
-
-		display-timings {
-			lw700 {
-				native-mode;
-				clock-frequency = <33000033>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <96>;
-				hfront-porch = <96>;
-				vback-porch = <20>;
-				vfront-porch = <21>;
-				hsync-len = <64>;
-				vsync-len = <4>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-
-		port {
-			display_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp0>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-key {
-			label = "user";
-			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-			linux,code = <256>; /* BTN_0 */
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
-		   <&gpio4 25 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	cs-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>,
-		   <&gpio3 27 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx51-apf51dev {
-		pinctrl_backlight: bl1grp {
-			fsl,pins = <
-				MX51_PAD_DI1_D1_CS__GPIO3_4 0x1F5
-			>;
-		};
-
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX51_PAD_EIM_EB2__GPIO2_22   0x0C5
-				MX51_PAD_EIM_EB3__GPIO2_23   0x0C5
-				MX51_PAD_EIM_CS4__GPIO2_29   0x100
-				MX51_PAD_NANDF_D13__GPIO3_27 0x0C5
-				MX51_PAD_NANDF_D12__GPIO3_28 0x0C5
-				MX51_PAD_CSPI1_SS0__GPIO4_24 0x0C5
-				MX51_PAD_CSPI1_SS1__GPIO4_25 0x0C5
-				MX51_PAD_GPIO1_2__GPIO1_2    0x0C5
-				MX51_PAD_GPIO1_3__GPIO1_3    0x0C5
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
-				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
-				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
-			>;
-		};
-
-		pinctrl_ecspi2: ecspi2grp {
-			fsl,pins = <
-				MX51_PAD_NANDF_RB3__ECSPI2_MISO		0x185
-				MX51_PAD_NANDF_D15__ECSPI2_MOSI		0x185
-				MX51_PAD_NANDF_RB2__ECSPI2_SCLK		0x185
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
-				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
-				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
-				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
-				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
-				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
-				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
-				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
-				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
-				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
-				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX51_PAD_EIM_D27__I2C2_SCL		0x400001ed
-				MX51_PAD_EIM_D24__I2C2_SDA		0x400001ed
-			>;
-		};
-
-		pinctrl_ipu_disp1: ipudisp1grp {
-			fsl,pins = <
-				MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
-				MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
-				MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
-				MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
-				MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
-				MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
-				MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
-				MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
-				MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
-				MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
-				MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
-				MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
-				MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
-				MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
-				MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
-				MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
-				MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
-				MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
-				MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
-				MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
-				MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
-				MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
-				MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
-				MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
-				MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
-				MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
-			>;
-		};
-	};
-};
-
-&ipu_di0_disp0 {
-	remote-endpoint = <&display_in>;
-};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
deleted file mode 100644
index 873cf242679c..000000000000
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ /dev/null
@@ -1,654 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx51.dtsi"
-
-/ {
-	model = "Freescale i.MX51 Babbage Board";
-	compatible = "fsl,imx51-babbage", "fsl,imx51";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory {
-		reg = <0x90000000 0x20000000>;
-	};
-
-	clocks {
-		ckih1 {
-			clock-frequency = <22579200>;
-		};
-
-		clk_26M: codec_clock {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <26000000>;
-			gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	display0: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp1>;
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: dvi {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp0>;
-			};
-		};
-	};
-
-	display1: display@di1 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb565";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp2>;
-		status = "disabled";
-		display-timings {
-			native-mode = <&timing1>;
-			timing1: claawvga {
-				clock-frequency = <27000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <40>;
-				hfront-porch = <60>;
-				vback-porch = <10>;
-				vfront-porch = <10>;
-				hsync-len = <20>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-
-		port {
-			display1_in: endpoint {
-				remote-endpoint = <&ipu_di1_disp1>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led-diagnostic {
-			label = "diagnostic";
-			gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_hub_reset: regulator@0 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbotgreg>;
-			reg = <0>;
-			regulator-name = "hub_reset";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx51-babbage-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx51-babbage-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <3>;
-	};
-
-	usbphy {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "simple-bus";
-
-		usbh1phy: usbh1phy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			clocks = <&clks IMX5_CLK_DUMMY>;
-			clock-names = "main_clk";
-			reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
-		   <&gpio4 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	pmic: mc13892@0 {
-		compatible = "fsl,mc13892";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		spi-max-frequency = <6000000>;
-		spi-cs-high;
-		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-		fsl,mc13xxx-uses-rtc;
-
-		regulators {
-			sw1_reg: sw1 {
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1375000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vpll_reg: vpll {
-				regulator-min-microvolt = <1050000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vdig_reg: vdig {
-				regulator-min-microvolt = <1650000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-			};
-
-			vsd_reg: vsd {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3150000>;
-			};
-
-			vusb2_reg: vusb2 {
-				regulator-min-microvolt = <2400000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vvideo_reg: vvideo {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-			};
-
-			vaudio_reg: vaudio {
-				regulator-min-microvolt = <2300000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			vcam_reg: vcam {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3150000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2900000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	flash: at45db321d@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
-		spi-max-frequency = <25000000>;
-		reg = <1>;
-
-		partition@0 {
-			label = "U-Boot";
-			reg = <0x0 0x40000>;
-			read-only;
-		};
-
-		partition@40000 {
-			label = "Kernel";
-			reg = <0x40000 0x3c0000>;
-		};
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "mii";
-	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	sgtl5000: codec@0a {
-		compatible = "fsl,sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_clkcodec>;
-		reg = <0x0a>;
-		clocks = <&clk_26M>;
-		VDDA-supply = <&vdig_reg>;
-		VDDIO-supply = <&vvideo_reg>;
-	};
-};
-
-&ipu_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&ipu_di1_disp1 {
-	remote-endpoint = <&display1_in>;
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp>;
-	linux,keymap = <
-		MATRIX_KEY(0, 0, KEY_UP)
-		MATRIX_KEY(0, 1, KEY_DOWN)
-		MATRIX_KEY(0, 2, KEY_VOLUMEDOWN)
-		MATRIX_KEY(0, 3, KEY_HOME)
-		MATRIX_KEY(1, 0, KEY_RIGHT)
-		MATRIX_KEY(1, 1, KEY_LEFT)
-		MATRIX_KEY(1, 2, KEY_ENTER)
-		MATRIX_KEY(1, 3, KEY_VOLUMEUP)
-		MATRIX_KEY(2, 0, KEY_F6)
-		MATRIX_KEY(2, 1, KEY_F8)
-		MATRIX_KEY(2, 2, KEY_F9)
-		MATRIX_KEY(2, 3, KEY_F10)
-		MATRIX_KEY(3, 0, KEY_F1)
-		MATRIX_KEY(3, 1, KEY_F2)
-		MATRIX_KEY(3, 2, KEY_F3)
-		MATRIX_KEY(3, 3, KEY_POWER)
-	>;
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	vbus-supply = <&reg_hub_reset>;
-	fsl,usbphy = <&usbh1phy>;
-	phy_type = "ulpi";
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "otg";
-	disable-over-current;
-	phy_type = "utmi_wide";
-	status = "okay";
-};
-
-&iomuxc {
-	imx51-babbage {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
-				MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
-				MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
-				MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
-			>;
-		};
-
-		pinctrl_clkcodec: clkcodecgrp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_RDY__GPIO4_26		0x80000000
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
-				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
-				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
-				MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
-				MX51_PAD_CSPI1_SS1__GPIO4_25		0x85 /* CS1 */
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
-				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
-				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
-				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
-				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
-				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
-				MX51_PAD_GPIO1_0__GPIO1_0		0x100
-				MX51_PAD_GPIO1_1__GPIO1_1		0x100
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
-				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
-				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
-				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
-				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
-				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
-				MX51_PAD_GPIO1_5__GPIO1_5		0x100 /* WP */
-				MX51_PAD_GPIO1_6__GPIO1_6		0x100 /* CD */
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_EB2__FEC_MDIO		0x000001f5
-				MX51_PAD_EIM_EB3__FEC_RDATA1		0x00000085
-				MX51_PAD_EIM_CS2__FEC_RDATA2		0x00000085
-				MX51_PAD_EIM_CS3__FEC_RDATA3		0x00000085
-				MX51_PAD_EIM_CS4__FEC_RX_ER		0x00000180
-				MX51_PAD_EIM_CS5__FEC_CRS		0x00000180
-				MX51_PAD_NANDF_RB2__FEC_COL		0x00000180
-				MX51_PAD_NANDF_RB3__FEC_RX_CLK		0x00000180
-				MX51_PAD_NANDF_D9__FEC_RDATA0		0x00002180
-				MX51_PAD_NANDF_D8__FEC_TDATA0		0x00002004
-				MX51_PAD_NANDF_CS2__FEC_TX_ER		0x00002004
-				MX51_PAD_NANDF_CS3__FEC_MDC		0x00002004
-				MX51_PAD_NANDF_CS4__FEC_TDATA1		0x00002004
-				MX51_PAD_NANDF_CS5__FEC_TDATA2		0x00002004
-				MX51_PAD_NANDF_CS6__FEC_TDATA3		0x00002004
-				MX51_PAD_NANDF_CS7__FEC_TX_EN		0x00002004
-				MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK	0x00002180
-				MX51_PAD_NANDF_D11__FEC_RX_DV		0x000020a4
-				MX51_PAD_EIM_A20__GPIO2_14		0x00000085 /* Phy Reset */
-			>;
-		};
-
-		pinctrl_gpio_keys: gpiokeysgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_A27__GPIO2_21		0x5
-			>;
-		};
-
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_D22__GPIO2_6		0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX51_PAD_EIM_D19__I2C1_SCL		0x400001ed
-				MX51_PAD_EIM_D16__I2C1_SDA		0x400001ed
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
-				MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
-			>;
-		};
-
-		pinctrl_ipu_disp1: ipudisp1grp {
-			fsl,pins = <
-				MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
-				MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
-				MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
-				MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
-				MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
-				MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
-				MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
-				MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
-				MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
-				MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
-				MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
-				MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
-				MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
-				MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
-				MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
-				MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
-				MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
-				MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
-				MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
-				MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
-				MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
-				MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
-				MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
-				MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
-				MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
-				MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
-			>;
-		};
-
-		pinctrl_ipu_disp2: ipudisp2grp {
-			fsl,pins = <
-				MX51_PAD_DISP2_DAT0__DISP2_DAT0		0x5
-				MX51_PAD_DISP2_DAT1__DISP2_DAT1		0x5
-				MX51_PAD_DISP2_DAT2__DISP2_DAT2		0x5
-				MX51_PAD_DISP2_DAT3__DISP2_DAT3		0x5
-				MX51_PAD_DISP2_DAT4__DISP2_DAT4		0x5
-				MX51_PAD_DISP2_DAT5__DISP2_DAT5		0x5
-				MX51_PAD_DISP2_DAT6__DISP2_DAT6		0x5
-				MX51_PAD_DISP2_DAT7__DISP2_DAT7		0x5
-				MX51_PAD_DISP2_DAT8__DISP2_DAT8		0x5
-				MX51_PAD_DISP2_DAT9__DISP2_DAT9		0x5
-				MX51_PAD_DISP2_DAT10__DISP2_DAT10	0x5
-				MX51_PAD_DISP2_DAT11__DISP2_DAT11	0x5
-				MX51_PAD_DISP2_DAT12__DISP2_DAT12	0x5
-				MX51_PAD_DISP2_DAT13__DISP2_DAT13	0x5
-				MX51_PAD_DISP2_DAT14__DISP2_DAT14	0x5
-				MX51_PAD_DISP2_DAT15__DISP2_DAT15	0x5
-				MX51_PAD_DI2_PIN2__DI2_PIN2		0x5
-				MX51_PAD_DI2_PIN3__DI2_PIN3		0x5
-				MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
-				MX51_PAD_DI_GP4__DI2_PIN15		0x5
-			>;
-		};
-
-		pinctrl_kpp: kppgrp {
-			fsl,pins = <
-				MX51_PAD_KEY_ROW0__KEY_ROW0		0xe0
-				MX51_PAD_KEY_ROW1__KEY_ROW1		0xe0
-				MX51_PAD_KEY_ROW2__KEY_ROW2		0xe0
-				MX51_PAD_KEY_ROW3__KEY_ROW3		0xe0
-				MX51_PAD_KEY_COL0__KEY_COL0		0xe8
-				MX51_PAD_KEY_COL1__KEY_COL1		0xe8
-				MX51_PAD_KEY_COL2__KEY_COL2		0xe8
-				MX51_PAD_KEY_COL3__KEY_COL3		0xe8
-			>;
-		};
-
-		pinctrl_pmic: pmicgrp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_8__GPIO1_8		0xe5 /* IRQ */
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
-				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
-				MX51_PAD_UART1_RTS__UART1_RTS		0x1c5
-				MX51_PAD_UART1_CTS__UART1_CTS		0x1c5
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
-				MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX51_PAD_EIM_D25__UART3_RXD		0x1c5
-				MX51_PAD_EIM_D26__UART3_TXD		0x1c5
-				MX51_PAD_EIM_D27__UART3_RTS		0x1c5
-				MX51_PAD_EIM_D24__UART3_CTS		0x1c5
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX51_PAD_USBH1_CLK__USBH1_CLK		0x80000000
-				MX51_PAD_USBH1_DIR__USBH1_DIR		0x80000000
-				MX51_PAD_USBH1_NXT__USBH1_NXT		0x80000000
-				MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x80000000
-				MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x80000000
-				MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x80000000
-				MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x80000000
-				MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x80000000
-				MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x80000000
-				MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x80000000
-				MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x80000000
-			>;
-		};
-
-		pinctrl_usbh1reg: usbh1reggrp {
-			fsl,pins = <
-				MX51_PAD_EIM_D21__GPIO2_5		0x85
-			>;
-		};
-
-		pinctrl_usbotgreg: usbotgreggrp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_7__GPIO1_7		0x85
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
deleted file mode 100644
index 1db517d3d497..000000000000
--- a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "imx51-digi-connectcore-som.dtsi"
-
-/ {
-	model = "Digi ConnectCore CC(W)-MX51 JSK";
-	compatible = "digi,connectcore-ccxmx51-jsk",
-		     "digi,connectcore-ccxmx51-som", "fsl,imx51";
-
-	chosen {
-		linux,stdout-path = &uart1;
-	};
-};
-
-&owire {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_owire>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	dr_mode = "host";
-	phy_type = "ulpi";
-	disable-over-current;
-	status = "okay";
-};
-
-&iomuxc {
-	imx51-digi-connectcore-jsk {
-		pinctrl_owire: owiregrp {
-			fsl,pins = <
-				MX51_PAD_OWIRE_LINE__OWIRE_LINE		0x40000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
-				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
-				MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
-				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x1e5
-				MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x1e5
-				MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x1e5
-				MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x1e5
-				MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x1e5
-				MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x1e5
-				MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x1e5
-				MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x1e5
-				MX51_PAD_USBH1_CLK__USBH1_CLK		0x1e5
-				MX51_PAD_USBH1_DIR__USBH1_DIR		0x1e5
-				MX51_PAD_USBH1_NXT__USBH1_NXT		0x1e5
-				MX51_PAD_USBH1_STP__USBH1_STP		0x1e5
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
deleted file mode 100644
index b821066a0d2a..000000000000
--- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
+++ /dev/null
@@ -1,376 +0,0 @@
-/*
- * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx51.dtsi"
-
-/ {
-	model = "Digi ConnectCore CC(W)-MX51";
-	compatible = "digi,connectcore-ccxmx51-som", "fsl,imx51";
-
-	memory {
-		reg = <0x90000000 0x08000000>;
-	};
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	pmic: mc13892@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mc13892>;
-		compatible = "fsl,mc13892";
-		spi-max-frequency = <16000000>;
-		spi-cs-high;
-		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-		fsl,mc13xxx-uses-rtc;
-
-		regulators {
-			sw1_reg: sw1 {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1225000>;
-				regulator-max-microvolt = <1225000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst { };
-
-			viohi_reg: viohi {
-				regulator-always-on;
-			};
-
-			vpll_reg: vpll {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vdig_reg: vdig {
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1250000>;
-				regulator-always-on;
-			};
-
-			vsd_reg: vsd {
-				regulator-min-microvolt = <3150000>;
-				regulator-max-microvolt = <3150000>;
-				regulator-always-on;
-			};
-
-			vusb2_reg: vusb2 {
-				regulator-min-microvolt = <2600000>;
-				regulator-max-microvolt = <2600000>;
-				regulator-always-on;
-			};
-
-			vvideo_reg: vvideo {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-always-on;
-			};
-
-			vaudio_reg: vaudio {
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			vcam_reg: vcam {
-				regulator-min-microvolt = <2750000>;
-				regulator-max-microvolt = <2750000>;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <3150000>;
-				regulator-max-microvolt = <3150000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vusb_reg: vusb {
-				regulator-always-on;
-			};
-
-			gpo1_reg: gpo1 { };
-
-			gpo2_reg: gpo2 { };
-
-			gpo3_reg: gpo3 { };
-
-			gpo4_reg: gpo4 { };
-
-			pwgt2spi_reg: pwgt2spi {
-				regulator-always-on;
-			};
-
-			vcoincell_reg: vcoincell {
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	cap-sdio-irq;
-	wakeup-source;
-	keep-power-in-suspend;
-	max-frequency = <50000000>;
-	no-1-8-v;
-	non-removable;
-	vmmc-supply = <&gpo4_reg>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "mii";
-	phy-supply = <&gpo3_reg>;
-	/* Pins shared with LCD2, keep status disabled */
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	mma7455l@1d {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mma7455l>;
-		compatible = "fsl,mma7455l";
-		reg = <0x1d>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>, <6 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&usbotg {
-	phy_type = "utmi_wide";
-	disable-over-current;
-	/* Device role is not known, keep status disabled */
-};
-
-&weim {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_weim>;
-	status = "okay";
-
-	lan9221: lan9221@5,0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lan9221>;
-		compatible = "smsc,lan9221", "smsc,lan9115";
-		reg = <5 0x00000000 0x1000>;
-		fsl,weim-cs-timing = <
-			0x00420081 0x00000000
-			0x32260000 0x00000000
-			0x72080f00 0x00000000
-		>;
-		clocks = <&clks IMX5_CLK_DUMMY>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
-		phy-mode = "mii";
-		reg-io-width = <2>;
-		smsc,irq-push-pull;
-		vdd33a-supply = <&gpo2_reg>;
-		vddvario-supply = <&gpo2_reg>;
-	};
-};
-
-&iomuxc {
-	imx51-digi-connectcore-som {
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
-				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
-				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
-				MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
-				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
-				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
-				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
-				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
-				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
-				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
-				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
-				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
-				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
-				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
-				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
-				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
-				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
-				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
-				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
-				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
-				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
-				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
-				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
-				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_2__I2C2_SCL		0x400001ed
-				MX51_PAD_GPIO1_3__I2C2_SDA		0x400001ed
-			>;
-		};
-
-		pinctrl_nfc: nfcgrp {
-			fsl,pins = <
-				MX51_PAD_NANDF_D0__NANDF_D0		0x80000000
-				MX51_PAD_NANDF_D1__NANDF_D1		0x80000000
-				MX51_PAD_NANDF_D2__NANDF_D2		0x80000000
-				MX51_PAD_NANDF_D3__NANDF_D3		0x80000000
-				MX51_PAD_NANDF_D4__NANDF_D4		0x80000000
-				MX51_PAD_NANDF_D5__NANDF_D5		0x80000000
-				MX51_PAD_NANDF_D6__NANDF_D6		0x80000000
-				MX51_PAD_NANDF_D7__NANDF_D7		0x80000000
-				MX51_PAD_NANDF_ALE__NANDF_ALE		0x80000000
-				MX51_PAD_NANDF_CLE__NANDF_CLE		0x80000000
-				MX51_PAD_NANDF_RE_B__NANDF_RE_B		0x80000000
-				MX51_PAD_NANDF_WE_B__NANDF_WE_B		0x80000000
-				MX51_PAD_NANDF_WP_B__NANDF_WP_B		0x80000000
-				MX51_PAD_NANDF_CS0__NANDF_CS0		0x80000000
-				MX51_PAD_NANDF_RB0__NANDF_RB0		0x80000000
-			>;
-		};
-
-		pinctrl_lan9221: lan9221grp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_9__GPIO1_9		0xe5 /* IRQ */
-			>;
-		};
-
-		pinctrl_mc13892: mc13892grp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_5__GPIO1_5		0xe5 /* IRQ */
-			>;
-		};
-
-		pinctrl_mma7455l: mma7455lgrp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_7__GPIO1_7		0xe5 /* IRQ1 */
-				MX51_PAD_GPIO1_6__GPIO1_6		0xe5 /* IRQ2 */
-			>;
-		};
-
-		pinctrl_weim: weimgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_DA0__EIM_DA0		0x80000000
-				MX51_PAD_EIM_DA1__EIM_DA1		0x80000000
-				MX51_PAD_EIM_DA2__EIM_DA2		0x80000000
-				MX51_PAD_EIM_DA3__EIM_DA3		0x80000000
-				MX51_PAD_EIM_DA4__EIM_DA4		0x80000000
-				MX51_PAD_EIM_DA5__EIM_DA5		0x80000000
-				MX51_PAD_EIM_DA6__EIM_DA6		0x80000000
-				MX51_PAD_EIM_DA7__EIM_DA7		0x80000000
-				MX51_PAD_EIM_DA8__EIM_DA8		0x80000000
-				MX51_PAD_EIM_DA9__EIM_DA9		0x80000000
-				MX51_PAD_EIM_DA10__EIM_DA10		0x80000000
-				MX51_PAD_EIM_DA11__EIM_DA11		0x80000000
-				MX51_PAD_EIM_DA12__EIM_DA12		0x80000000
-				MX51_PAD_EIM_DA13__EIM_DA13		0x80000000
-				MX51_PAD_EIM_DA14__EIM_DA14		0x80000000
-				MX51_PAD_EIM_DA15__EIM_DA15		0x80000000
-				MX51_PAD_EIM_A16__EIM_A16		0x80000000
-				MX51_PAD_EIM_A17__EIM_A17		0x80000000
-				MX51_PAD_EIM_A18__EIM_A18		0x80000000
-				MX51_PAD_EIM_A19__EIM_A19		0x80000000
-				MX51_PAD_EIM_A20__EIM_A20		0x80000000
-				MX51_PAD_EIM_A21__EIM_A21		0x80000000
-				MX51_PAD_EIM_A22__EIM_A22		0x80000000
-				MX51_PAD_EIM_A23__EIM_A23		0x80000000
-				MX51_PAD_EIM_A24__EIM_A24		0x80000000
-				MX51_PAD_EIM_A25__EIM_A25		0x80000000
-				MX51_PAD_EIM_A26__EIM_A26		0x80000000
-				MX51_PAD_EIM_A27__EIM_A27		0x80000000
-				MX51_PAD_EIM_D16__EIM_D16		0x80000000
-				MX51_PAD_EIM_D17__EIM_D17		0x80000000
-				MX51_PAD_EIM_D18__EIM_D18		0x80000000
-				MX51_PAD_EIM_D19__EIM_D19		0x80000000
-				MX51_PAD_EIM_D20__EIM_D20		0x80000000
-				MX51_PAD_EIM_D21__EIM_D21		0x80000000
-				MX51_PAD_EIM_D22__EIM_D22		0x80000000
-				MX51_PAD_EIM_D23__EIM_D23		0x80000000
-				MX51_PAD_EIM_D24__EIM_D24		0x80000000
-				MX51_PAD_EIM_D25__EIM_D25		0x80000000
-				MX51_PAD_EIM_D26__EIM_D26		0x80000000
-				MX51_PAD_EIM_D27__EIM_D27		0x80000000
-				MX51_PAD_EIM_D28__EIM_D28		0x80000000
-				MX51_PAD_EIM_D29__EIM_D29		0x80000000
-				MX51_PAD_EIM_D30__EIM_D30		0x80000000
-				MX51_PAD_EIM_D31__EIM_D31		0x80000000
-				MX51_PAD_EIM_OE__EIM_OE			0x80000000
-				MX51_PAD_EIM_DTACK__EIM_DTACK		0x80000000
-				MX51_PAD_EIM_LBA__EIM_LBA		0x80000000
-				MX51_PAD_EIM_CS5__EIM_CS5		0x80000000 /* CS5 */
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
deleted file mode 100644
index 63164266af83..000000000000
--- a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include "imx51.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX51";
-	compatible = "eukrea,cpuimx51", "fsl,imx51";
-
-	memory {
-		reg = <0x90000000 0x10000000>; /* 256M */
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	tsc2007: tsc2007@49 {
-		compatible = "ti,tsc2007";
-		gpios = <&gpio4 0 1>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <0x0 0x8>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc2007_1>;
-		reg = <0x49>;
-		ti,x-plate-ohms = <180>;
-	};
-};
-
-&iomuxc {
-	imx51-eukrea {
-		pinctrl_tsc2007_1: tsc2007grp-1 {
-			fsl,pins = <
-				MX51_PAD_GPIO_NAND__GPIO_NAND 0x1f5
-				MX51_PAD_NANDF_D8__GPIO4_0 0x1f5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
-				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
-				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
-				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
-				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
-				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
-				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
-				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
-				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
-				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
-				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
-				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
-				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
-				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
-				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
-				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX51_PAD_SD2_CMD__I2C1_SCL		0x400001ed
-				MX51_PAD_SD2_CLK__I2C1_SDA		0x400001ed
-			>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
deleted file mode 100644
index 1305b05c7ed9..000000000000
--- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-/dts-v1/;
-#include "imx51-eukrea-cpuimx51.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Eukrea CPUIMX51";
-	compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51";
-
-	clocks {
-		clk24M: can_clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiokeys_1>;
-
-		button-1 {
-			label = "BP1";
-			gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
-			linux,code = <256>;
-			wakeup-source;
-			linux,input-type = <1>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpioled>;
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_can: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "CAN_RST";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-			startup-delay-us = <20000>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "eukrea,asoc-tlv320";
-		eukrea,model = "imx51-eukrea-tlv320aic23";
-		ssi-controller = <&ssi2>;
-		fsl,mux-int-port = <2>;
-		fsl,mux-ext-port = <3>;
-	};
-
-	usbphy {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "simple-bus";
-
-		usbh1phy: usbh1phy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
-			clock-names = "main_clk";
-			clock-frequency = <19200000>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
-	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	can0: can@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_can>;
-		compatible = "microchip,mcp2515";
-		reg = <0>;
-		clocks = <&clk24M>;
-		spi-max-frequency = <10000000>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-		vdd-supply = <&reg_can>;
-	};
-};
-
-&i2c1 {
-	tlv320aic23: codec@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-	};
-};
-
-&iomuxc {
-	imx51-eukrea {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
-				MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
-				MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
-				MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
-			>;
-		};
-
-
-		pinctrl_can: cangrp {
-			fsl,pins = <
-				MX51_PAD_CSI2_PIXCLK__GPIO4_15		0x80000000	/* nReset */
-				MX51_PAD_GPIO1_1__GPIO1_1		0x80000000	/* IRQ */
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
-				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
-				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
-				MX51_PAD_CSPI1_SS0__GPIO4_24		0x80000000 	/* CS0 */
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
-				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
-				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
-				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
-				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
-				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
-				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
-				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart3_rtscts: uart3rtsctsgrp {
-			fsl,pins = <
-				MX51_PAD_KEY_COL4__UART3_RTS		0x1c5
-				MX51_PAD_KEY_COL5__UART3_CTS		0x1c5
-			>;
-		};
-
-		pinctrl_backlight_1: backlightgrp-1 {
-			fsl,pins = <
-				MX51_PAD_DI1_D1_CS__GPIO3_4 0x1f5
-			>;
-		};
-
-		pinctrl_esdhc1_cd: esdhc1_cd {
-			fsl,pins = <
-				MX51_PAD_GPIO1_0__GPIO1_0 0xd5
-			>;
-		};
-
-		pinctrl_gpiokeys_1: gpiokeysgrp-1 {
-			fsl,pins = <
-				MX51_PAD_NANDF_D9__GPIO3_31 0x1f5
-			>;
-		};
-
-		pinctrl_gpioled: gpioledgrp-1 {
-			fsl,pins = <
-				MX51_PAD_NANDF_D10__GPIO3_30 0x80000000
-			>;
-		};
-
-		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
-			fsl,pins = <
-				MX51_PAD_CSI1_D9__GPIO3_13 0x1f5
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX51_PAD_USBH1_CLK__USBH1_CLK     0x1e5
-				MX51_PAD_USBH1_DIR__USBH1_DIR     0x1e5
-				MX51_PAD_USBH1_NXT__USBH1_NXT     0x1e5
-				MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5
-				MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5
-				MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5
-				MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5
-				MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5
-				MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5
-				MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5
-				MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5
-				MX51_PAD_USBH1_STP__USBH1_STP     0x1e5
-			>;
-		};
-
-		pinctrl_usbh1_vbus: usbh1-vbusgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_CS3__GPIO2_28 0x1f5
-			>;
-		};
-	};
-};
-
-&ssi2 {
-	codec-handle = <&tlv320aic23>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	fsl,usbphy = <&usbh1phy>;
-	dr_mode = "host";
-	phy_type = "ulpi";
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "otg";
-	phy_type = "utmi_wide";
-	status = "okay";
-};
-
-&usbphy0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1_vbus>;
-	reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
deleted file mode 100644
index 4486bc47d140..000000000000
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx53.dtsi"
-
-/ {
-	model = "Freescale i.MX53 Automotive Reference Design Board";
-	compatible = "fsl,imx53-ard", "fsl,imx53";
-
-	memory {
-		reg = <0x70000000 0x40000000>;
-	};
-
-	eim-cs1@f4000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,eim-bus", "simple-bus";
-		reg = <0xf4000000 0x3ff0000>;
-		ranges;
-
-		lan9220@f4000000 {
-			compatible = "smsc,lan9220", "smsc,lan9115";
-			reg = <0xf4000000 0x2000000>;
-			phy-mode = "mii";
-			interrupt-parent = <&gpio2>;
-			interrupts = <31 0x8>;
-			reg-io-width = <4>;
-			/*
-			 * VDD33A and VDDVARIO of LAN9220 are supplied by
-			 * SW4_3V3 of LTC3589.  Before the regulator driver
-			 * for this PMIC is available, we use a fixed dummy
-			 * 3V3 regulator to get LAN9220 driver probing work.
-			 */
-			vdd33a-supply = <&reg_3p3v>;
-			vddvario-supply = <&reg_3p3v>;
-			smsc,irq-push-pull;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		home {
-			label = "Home";
-			gpios = <&gpio5 10 0>;
-			linux,code = <102>; /* KEY_HOME */
-			wakeup-source;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio5 11 0>;
-			linux,code = <158>; /* KEY_BACK */
-			wakeup-source;
-		};
-
-		program {
-			label = "Program";
-			gpios = <&gpio5 12 0>;
-			linux,code = <362>; /* KEY_PROGRAM */
-			wakeup-source;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio5 13 0>;
-			linux,code = <115>; /* KEY_VOLUMEUP */
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio4 0 0>;
-			linux,code = <114>; /* KEY_VOLUMEDOWN */
-		};
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-ard {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_1__GPIO1_1             0x80000000
-				MX53_PAD_GPIO_9__GPIO1_9             0x80000000
-				MX53_PAD_EIM_EB3__GPIO2_31           0x80000000
-				MX53_PAD_GPIO_10__GPIO4_0            0x80000000
-				MX53_PAD_DISP0_DAT16__GPIO5_10	     0x80000000
-				MX53_PAD_DISP0_DAT17__GPIO5_11       0x80000000
-				MX53_PAD_DISP0_DAT18__GPIO5_12       0x80000000
-				MX53_PAD_DISP0_DAT19__GPIO5_13       0x80000000
-				MX53_PAD_EIM_D16__EMI_WEIM_D_16      0x80000000
-				MX53_PAD_EIM_D17__EMI_WEIM_D_17      0x80000000
-				MX53_PAD_EIM_D18__EMI_WEIM_D_18      0x80000000
-				MX53_PAD_EIM_D19__EMI_WEIM_D_19      0x80000000
-				MX53_PAD_EIM_D20__EMI_WEIM_D_20      0x80000000
-				MX53_PAD_EIM_D21__EMI_WEIM_D_21      0x80000000
-				MX53_PAD_EIM_D22__EMI_WEIM_D_22      0x80000000
-				MX53_PAD_EIM_D23__EMI_WEIM_D_23      0x80000000
-				MX53_PAD_EIM_D24__EMI_WEIM_D_24      0x80000000
-				MX53_PAD_EIM_D25__EMI_WEIM_D_25      0x80000000
-				MX53_PAD_EIM_D26__EMI_WEIM_D_26      0x80000000
-				MX53_PAD_EIM_D27__EMI_WEIM_D_27      0x80000000
-				MX53_PAD_EIM_D28__EMI_WEIM_D_28      0x80000000
-				MX53_PAD_EIM_D29__EMI_WEIM_D_29      0x80000000
-				MX53_PAD_EIM_D30__EMI_WEIM_D_30      0x80000000
-				MX53_PAD_EIM_D31__EMI_WEIM_D_31      0x80000000
-				MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0x80000000
-				MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0x80000000
-				MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0x80000000
-				MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0x80000000
-				MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0x80000000
-				MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0x80000000
-				MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0x80000000
-				MX53_PAD_EIM_OE__EMI_WEIM_OE	     0x80000000
-				MX53_PAD_EIM_RW__EMI_WEIM_RW	     0x80000000
-				MX53_PAD_EIM_CS1__EMI_WEIM_CS_1	     0x80000000
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_PATA_DATA8__ESDHC1_DAT4	0x1d5
-				MX53_PAD_PATA_DATA9__ESDHC1_DAT5	0x1d5
-				MX53_PAD_PATA_DATA10__ESDHC1_DAT6	0x1d5
-				MX53_PAD_PATA_DATA11__ESDHC1_DAT7	0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi
deleted file mode 100644
index ec390aa562c3..000000000000
--- a/arch/arm/boot/dts/imx53-m53.dtsi
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * Copyright (C) 2014 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "imx53.dtsi"
-
-/ {
-	model = "Aries/DENX M53";
-	compatible = "aries,imx53-m53", "denx,imx53-m53", "fsl,imx53";
-
-	memory {
-		reg = <0x70000000 0x20000000>,
-		      <0xb0000000 0x20000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p2v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P2V";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
-
-		reg_backlight: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "lcd-supply";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	stmpe610@41 {
-		compatible = "st,stmpe610";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x41>;
-		id = <0>;
-		blocks = <0x5>;
-		interrupts = <6 0x0>;
-		interrupt-parent = <&gpio7>;
-		irq-trigger = <0x1>;
-
-		stmpe_touchscreen {
-			compatible = "st,stmpe-ts";
-			reg = <0>;
-			st,sample-time = <4>;
-			st,mod-12b = <1>;
-			st,ref-sel = <0>;
-			st,adc-freq = <1>;
-			st,ave-ctrl = <3>;
-			st,touch-det-delay = <3>;
-			st,settling = <4>;
-			st,fraction-z = <7>;
-			st,i-drive = <1>;
-		};
-	};
-
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-
-	rtc: rtc@68 {
-		compatible = "st,m41t62";
-		reg = <0x68>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-m53evk {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x80000000
-				MX53_PAD_EIM_EB3__GPIO2_31		0x80000000
-				MX53_PAD_PATA_DA_0__GPIO7_6		0x80000000
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D16__I2C2_SDA		0xc0000000
-				MX53_PAD_EIM_EB2__I2C2_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_nand: nandgrp {
-			fsl,pins = <
-				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
-				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
-				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
-				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
-				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
-				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
-				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
-				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
-				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
-				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
-				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
-				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
-				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
-				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
-				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
-			>;
-		};
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
deleted file mode 100644
index 4347a321c782..000000000000
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ /dev/null
@@ -1,375 +0,0 @@
-/*
- * Copyright (C) 2013 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx53-m53.dtsi"
-
-/ {
-	model = "Aries/DENX M53EVK";
-	compatible = "aries,imx53-m53evk", "denx,imx53-m53evk", "fsl,imx53";
-
-	display1: display@di1 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp1>;
-
-		display-timings {
-			800x480p60 {
-				native-mode;
-				clock-frequency = <31500000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <40>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				vback-porch = <33>;
-				vfront-porch = <9>;
-				vsync-len = <3>;
-				vsync-active = <1>;
-			};
-		};
-
-		port {
-			display1_in: endpoint {
-				remote-endpoint = <&ipu_di1_disp1>;
-			};
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 3000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		power-supply = <&reg_backlight>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio>;
-
-		user1 {
-			label = "user1";
-			gpios = <&gpio2 8 0>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		user2 {
-			label = "user2";
-			gpios = <&gpio2 9 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usbh1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 2 0>;
-		};
-
-		reg_usb_otg_vbus: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 4 0>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx53-m53evk-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx53-m53evk-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"Ext Spk", "LINE_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	sgtl5000: codec@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		VDDA-supply = <&reg_3p2v>;
-		VDDIO-supply = <&reg_3p2v>;
-		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-m53evk {
-		pinctrl_usb: usbgrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_2__GPIO1_2		0x80000000
-				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x80000000
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_4__GPIO1_4		0x000b0
-			>;
-		};
-
-		led_pin_gpio: led_gpio@0 {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA8__GPIO2_8		0x80000000
-				MX53_PAD_PATA_DATA9__GPIO2_9		0x80000000
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC	0x80000000
-				MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD	0x80000000
-				MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS	0x80000000
-				MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_7__CAN1_TXCAN		0x80000000
-				MX53_PAD_GPIO_8__CAN1_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_can2: can2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
-				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
-				MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
-				MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_ipu_disp1: ipudisp1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0	0x5
-				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1	0x5
-				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2	0x5
-				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3	0x5
-				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4	0x5
-				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5	0x5
-				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6	0x5
-				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7	0x5
-				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8	0x5
-				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9	0x5
-				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10	0x5
-				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11	0x5
-				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12	0x5
-				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13	0x5
-				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14	0x5
-				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15	0x5
-				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16	0x5
-				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17	0x5
-				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18	0x5
-				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19	0x5
-				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20	0x5
-				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21	0x5
-				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22	0x5
-				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23	0x5
-				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK	0x5
-				MX53_PAD_EIM_DA13__IPU_DI1_D0_CS	0x5
-				MX53_PAD_EIM_DA14__IPU_DI1_D1_CS	0x5
-				MX53_PAD_EIM_DA15__IPU_DI1_PIN1		0x5
-				MX53_PAD_EIM_DA11__IPU_DI1_PIN2		0x5
-				MX53_PAD_EIM_DA12__IPU_DI1_PIN3		0x5
-				MX53_PAD_EIM_A25__IPU_DI1_PIN12		0x5
-				MX53_PAD_EIM_DA10__IPU_DI1_PIN15	0x5
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX53_PAD_DISP0_DAT8__PWM1_PWMO		0x5
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
-				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
-			>;
-		};
-	};
-};
-
-&ipu_di1_disp1 {
-	remote-endpoint = <&display1_in>;
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb>;
-	vbus-supply = <&reg_usbh1_vbus>;
-	phy_type = "utmi";
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	dr_mode = "otg";
-	vbus-supply = <&reg_usb_otg_vbus>;
-	disable-over-current;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
deleted file mode 100644
index df705ba48897..000000000000
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx53-tqma53.dtsi"
-
-/ {
-	model = "TQ MBa53 starter kit";
-	compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000>;
-		brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
-		default-brightness-level = <10>;
-		enable-gpios = <&gpio7 7 0>;
-		power-supply = <&reg_backlight>;
-	};
-
-	disp1: display@disp1 {
-		compatible = "fsl,imx-parallel-display";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp1_1>;
-		interface-pix-fmt = "rgb24";
-		status = "disabled";
-
-		port {
-			display1_in: endpoint {
-				remote-endpoint = <&ipu_di1_disp1>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_backlight: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "lcd-supply";
-			gpio = <&gpio2 5 0>;
-			startup-delay-us = <5000>;
-		};
-
-		reg_3p2v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P2V";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
-	};
-
-	sound {
-		compatible = "tq,imx53-mba53-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx53-mba53-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <5>;
-	};
-};
-
-&ldb {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lvds1_1>;
-	status = "disabled";
-};
-
-&iomuxc {
-	lvds1 {
-		pinctrl_lvds1_1: lvds1-grp1 {
-			fsl,pins = <
-				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
-				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
-				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
-				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
-				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
-			>;
-		};
-
-		pinctrl_lvds1_2: lvds1-grp2 {
-			fsl,pins = <
-				MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
-				MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
-				MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
-				MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
-				MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
-			>;
-		};
-	};
-
-	disp1 {
-		pinctrl_disp1_1: disp1-grp1 {
-			fsl,pins = <
-				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x80000000 /* DISP1_CLK */
-				MX53_PAD_EIM_DA10__IPU_DI1_PIN15   0x80000000 /* DISP1_DRDY */
-				MX53_PAD_EIM_D23__IPU_DI1_PIN2     0x80000000 /* DISP1_HSYNC */
-				MX53_PAD_EIM_EB3__IPU_DI1_PIN3     0x80000000 /* DISP1_VSYNC */
-				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x80000000
-				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x80000000
-				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x80000000
-				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x80000000
-				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x80000000
-				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x80000000
-				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x80000000
-				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x80000000
-				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x80000000
-				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x80000000
-				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x80000000
-				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x80000000
-				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x80000000
-				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x80000000
-				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9  0x80000000
-				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8  0x80000000
-				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7  0x80000000
-				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6  0x80000000
-				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5  0x80000000
-				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4  0x80000000
-				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3  0x80000000
-				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2  0x80000000
-				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1  0x80000000
-				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0  0x80000000
-			>;
-		};
-	};
-
-	tve {
-		pinctrl_vga_sync_1: vgasync-grp1 {
-			fsl,pins = <
-				/* VGA_VSYNC, HSYNC with max drive strength */
-				MX53_PAD_EIM_CS1__IPU_DI1_PIN6	   0xe6
-				MX53_PAD_EIM_DA15__IPU_DI1_PIN4	   0xe6
-			>;
-		};
-	};
-};
-
-&ipu_di1_disp1 {
-	remote-endpoint = <&display1_in>;
-};
-
-&cspi {
-	status = "okay";
-};
-
-&audmux {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-};
-
-&i2c2 {
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
-		VDDA-supply = <&reg_3p2v>;
-		VDDIO-supply = <&reg_3p2v>;
-	};
-
-	expander: pca9554@20 {
-		compatible = "pca9554";
-		reg = <0x20>;
-		interrupts = <109>;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-
-	sensor2: lm75@49 {
-		compatible = "lm75";
-		reg = <0x49>;
-	};
-};
-
-&fec {
-	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&esdhc2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&ecspi1 {
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&tve {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_vga_sync_1>;
-	ddc-i2c-bus = <&i2c3>;
-	fsl,tve-mode = "vga";
-	fsl,hsync-pin = <4>;
-	fsl,vsync-pin = <6>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
deleted file mode 100644
index 683dcbe27cbd..000000000000
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ /dev/null
@@ -1,368 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "imx53.dtsi"
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory {
-		reg = <0x70000000 0x20000000>,
-		      <0xb0000000 0x20000000>;
-	};
-
-	display0: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb565";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp0>;
-		status = "disabled";
-		display-timings {
-			claawvga {
-				native-mode;
-				clock-frequency = <27000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <40>;
-				hfront-porch = <60>;
-				vback-porch = <10>;
-				vfront-porch = <10>;
-				hsync-len = <20>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp0>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			wakeup-source;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio7_7>;
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio7 7 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p2v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P2V";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
-
-		reg_usb_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio7 8 0>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx53-qsb-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx53-qsb-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <5>;
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	status = "okay";
-};
-
-&ipu_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&esdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc3>;
-	cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-qsb {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
-				MX53_PAD_GPIO_8__GPIO1_8          0x80000000
-				MX53_PAD_PATA_DATA14__GPIO2_14    0x80000000
-				MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
-				MX53_PAD_EIM_DA11__GPIO3_11       0x80000000
-				MX53_PAD_EIM_DA12__GPIO3_12       0x80000000
-				MX53_PAD_PATA_DA_0__GPIO7_6       0x80000000
-				MX53_PAD_PATA_DA_2__GPIO7_8	  0x80000000
-				MX53_PAD_GPIO_16__GPIO7_11        0x80000000
-			>;
-		};
-
-		led_pin_gpio7_7: led_gpio7_7@0 {
-			fsl,pins = <
-				MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
-				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
-				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
-				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_esdhc3: esdhc3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
-				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
-				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
-				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
-				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
-				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
-				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
-				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
-				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
-				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x4
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x1fc
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x180
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x180
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x180
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x180
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x180
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x4
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x4
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x4
-			>;
-		};
-
-		/* open drain */
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT8__I2C1_SDA		0x400001ec
-				MX53_PAD_CSI0_DAT9__I2C1_SCL		0x400001ec
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
-				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_ipu_disp0: ipudisp0grp {
-			fsl,pins = <
-				MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x5
-				MX53_PAD_DI0_PIN15__IPU_DI0_PIN15	0x5
-				MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x5
-				MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		0x5
-				MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0	0x5
-				MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1	0x5
-				MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2	0x5
-				MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3	0x5
-				MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4	0x5
-				MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5	0x5
-				MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6	0x5
-				MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7	0x5
-				MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8	0x5
-				MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9	0x5
-				MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10	0x5
-				MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11	0x5
-				MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12	0x5
-				MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13	0x5
-				MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14	0x5
-				MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15	0x5
-				MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16	0x5
-				MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17	0x5
-				MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18	0x5
-				MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19	0x5
-				MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20	0x5
-				MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21	0x5
-				MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22	0x5
-				MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23	0x5
-			>;
-		};
-
-		pinctrl_vga_sync: vgasync-grp {
-			fsl,pins = <
-				/* VGA_HSYNC, VSYNC with max drive strength */
-				MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6
-				MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
-				MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
-			>;
-		};
-	};
-};
-
-&tve {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_vga_sync>;
-	ddc-i2c-bus = <&i2c2>;
-	fsl,tve-mode = "vga";
-	fsl,hsync-pin = <7>;	/* IPU DI1 PIN7 via EIM_OE */
-	fsl,vsync-pin = <8>;	/* IPU DI1 PIN8 via EIM_RW */
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	sgtl5000: codec@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		VDDA-supply = <&reg_3p2v>;
-		VDDIO-supply = <&reg_3p2v>;
-		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	accelerometer: mma8450@1c {
-		compatible = "fsl,mma8450";
-		reg = <0x1c>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&vpu {
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_vbus>;
-	phy_type = "utmi";
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "peripheral";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
deleted file mode 100644
index 33cb64fc8372..000000000000
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx53.dtsi"
-
-/ {
-	model = "Freescale i.MX53 Smart Mobile Reference Design Board";
-	compatible = "fsl,imx53-smd", "fsl,imx53";
-
-	memory {
-		reg = <0x70000000 0x40000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio2 14 0>;
-			linux,code = <115>; /* KEY_VOLUMEUP */
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio2 15 0>;
-			linux,code = <114>; /* KEY_VOLUMEDOWN */
-		};
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	non-removable;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
-	status = "okay";
-
-	zigbee: mc1323@0 {
-		compatible = "fsl,mc1323";
-		spi-max-frequency = <8000000>;
-		reg = <0>;
-	};
-
-	flash: m25p32@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p32", "st,m25p", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <1>;
-
-		partition@0 {
-			label = "U-Boot";
-			reg = <0x0 0x40000>;
-			read-only;
-		};
-
-		partition@40000 {
-			label = "Kernel";
-			reg = <0x40000 0x3c0000>;
-		};
-	};
-};
-
-&esdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc3>;
-	non-removable;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-smd {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
-				MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
-				MX53_PAD_EIM_EB2__GPIO2_30     0x80000000
-				MX53_PAD_EIM_DA13__GPIO3_13    0x80000000
-				MX53_PAD_EIM_D19__GPIO3_19     0x80000000
-				MX53_PAD_KEY_ROW2__GPIO4_11    0x80000000
-				MX53_PAD_PATA_DA_0__GPIO7_6    0x80000000
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
-				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
-				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
-				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
-				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
-				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
-				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
-				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
-			>;
-		};
-
-		pinctrl_esdhc3: esdhc3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
-				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
-				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
-				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
-				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
-				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
-				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
-				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
-				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
-				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT8__I2C1_SDA		0xc0000000
-				MX53_PAD_CSI0_DAT9__I2C1_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
-				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
-				MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
-				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-	};
-
-	magnetometer: mag3110@0e {
-		compatible = "fsl,mag3110";
-		reg = <0x0e>;
-	};
-
-	touchkey: mpr121@5a {
-		compatible = "fsl,mpr121";
-		reg = <0x5a>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	accelerometer: mma8450@1c {
-		compatible = "fsl,mma8450";
-		reg = <0x1c>;
-	};
-
-	camera: ov5642@3c {
-		compatible = "ovti,ov5642";
-		reg = <0x3c>;
-	};
-
-	pmic: dialog@48 {
-		compatible = "dlg,da9053", "dlg,da9052";
-		reg = <0x48>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
deleted file mode 100644
index eecdc1c55eef..000000000000
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ /dev/null
@@ -1,286 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "imx53.dtsi"
-
-/ {
-	model = "TQ TQMa53";
-	compatible = "tq,tqma53", "fsl,imx53";
-
-	memory {
-		reg = <0x70000000 0x40000000>; /* Up to 1GiB */
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>,
-		    <&pinctrl_esdhc2_cdwp>;
-	vmmc-supply = <&reg_3p3v>;
-	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	status = "disabled";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "disabled";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>,
-		   <&gpio3 24 0>, <&gpio3 25 0>;
-	status = "disabled";
-};
-
-&esdhc3 { /* EMMC */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc3>;
-	vmmc-supply = <&reg_3p3v>;
-	non-removable;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-tqma53 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				 MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 /* SSI_MCLK */
-				 MX53_PAD_PATA_DA_1__GPIO7_7     0x80000000 /* LCD_BLT_EN */
-				 MX53_PAD_PATA_DA_2__GPIO7_8     0x80000000 /* LCD_RESET */
-				 MX53_PAD_PATA_DATA5__GPIO2_5    0x80000000 /* LCD_POWER */
-				 MX53_PAD_PATA_DATA6__GPIO2_6    0x80000000 /* PMIC_INT */
-				 MX53_PAD_PATA_DATA14__GPIO2_14  0x80000000 /* CSI_RST */
-				 MX53_PAD_PATA_DATA15__GPIO2_15  0x80000000 /* CSI_PWDN */
-				 MX53_PAD_GPIO_19__GPIO4_5 	 0x80000000 /* #SYSTEM_DOWN */
-				 MX53_PAD_GPIO_3__GPIO1_3        0x80000000
-				 MX53_PAD_PATA_DA_0__GPIO7_6	 0x80000000 /* #PHY_RESET */
-				 MX53_PAD_GPIO_1__PWM2_PWMO	 0x80000000 /* LCD_CONTRAST */
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
-				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
-				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
-				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL2__CAN1_TXCAN		0x80000000
-				MX53_PAD_KEY_ROW2__CAN1_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_can2: can2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
-				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_cspi: cspigrp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__CSPI_MISO		0x1d5
-				MX53_PAD_SD1_CMD__CSPI_MOSI		0x1d5
-				MX53_PAD_SD1_CLK__CSPI_SCLK		0x1d5
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
-				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
-				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
-				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
-				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
-				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
-				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
-				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
-			>;
-		};
-
-		pinctrl_esdhc2_cdwp: esdhc2cdwp {
-			fsl,pins = <
-				MX53_PAD_GPIO_4__GPIO1_4	0x80000000 /* SD2_CD */
-				MX53_PAD_GPIO_2__GPIO1_2	0x80000000 /* SD2_WP */
-			>;
-		};
-
-		pinctrl_esdhc3: esdhc3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
-				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
-				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
-				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
-				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
-				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
-				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
-				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
-				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
-				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
-				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
-				MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "disabled";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "disabled";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "disabled";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "disabled";
-};
-
-&cspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi>;
-	cs-gpios = <&gpio1 18 0>, <&gpio1 19 0>,
-		   <&gpio1 21 0>;
-	status = "disabled";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pmic: mc34708@8 {
-		compatible = "fsl,mc34708";
-		reg = <0x8>;
-		fsl,mc13xxx-uses-rtc;
-		interrupt-parent = <&gpio2>;
-		interrupts = <6 4>; /* PATA_DATA6, active high */
-	};
-
-	sensor1: lm75@48 {
-		compatible = "lm75";
-		reg = <0x48>;
-	};
-
-	eeprom: 24c64@50 {
-		compatible = "atmel,24c64";
-		pagesize = <32>;
-		reg = <0x50>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
deleted file mode 100644
index 0ecb43d88522..000000000000
--- a/arch/arm/boot/dts/imx53-tx53-x03x.dts
+++ /dev/null
@@ -1,325 +0,0 @@
-/*
- * Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx53-tx53.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Ka-Ro electronics TX53 module (LCD)";
-	compatible = "karo,tx53", "fsl,imx53";
-
-	aliases {
-		display = &display;
-	};
-
-	soc {
-		display: display@di0 {
-			compatible = "fsl,imx-parallel-display";
-			interface-pix-fmt = "rgb24";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_rgb24_vga1>;
-			status = "okay";
-
-			port {
-				display0_in: endpoint {
-					remote-endpoint = <&ipu_di0_disp0>;
-				};
-			};
-
-			display-timings {
-				VGA {
-					clock-frequency = <25200000>;
-					hactive = <640>;
-					vactive = <480>;
-					hback-porch = <48>;
-					hsync-len = <96>;
-					hfront-porch = <16>;
-					vback-porch = <31>;
-					vsync-len = <2>;
-					vfront-porch = <12>;
-					hsync-active = <0>;
-					vsync-active = <0>;
-					de-active = <1>;
-					pixelclk-active = <0>;
-				};
-
-				ETV570 {
-					clock-frequency = <25200000>;
-					hactive = <640>;
-					vactive = <480>;
-					hback-porch = <114>;
-					hsync-len = <30>;
-					hfront-porch = <16>;
-					vback-porch = <32>;
-					vsync-len = <3>;
-					vfront-porch = <10>;
-					hsync-active = <0>;
-					vsync-active = <0>;
-					de-active = <1>;
-					pixelclk-active = <0>;
-				};
-
-				ET0350 {
-					clock-frequency = <6413760>;
-					hactive = <320>;
-					vactive = <240>;
-					hback-porch = <34>;
-					hsync-len = <34>;
-					hfront-porch = <20>;
-					vback-porch = <15>;
-					vsync-len = <3>;
-					vfront-porch = <4>;
-					hsync-active = <0>;
-					vsync-active = <0>;
-					de-active = <1>;
-					pixelclk-active = <0>;
-				};
-
-				ET0430 {
-					clock-frequency = <9009000>;
-					hactive = <480>;
-					vactive = <272>;
-					hback-porch = <2>;
-					hsync-len = <41>;
-					hfront-porch = <2>;
-					vback-porch = <2>;
-					vsync-len = <10>;
-					vfront-porch = <2>;
-					hsync-active = <0>;
-					vsync-active = <0>;
-					de-active = <1>;
-					pixelclk-active = <1>;
-				};
-
-				ET0500 {
-					clock-frequency = <33264000>;
-					hactive = <800>;
-					vactive = <480>;
-					hback-porch = <88>;
-					hsync-len = <128>;
-					hfront-porch = <40>;
-					vback-porch = <33>;
-					vsync-len = <2>;
-					vfront-porch = <10>;
-					hsync-active = <0>;
-					vsync-active = <0>;
-					de-active = <1>;
-					pixelclk-active = <0>;
-				};
-
-				ET0700 { /* same as ET0500 */
-					clock-frequency = <33264000>;
-					hactive = <800>;
-					vactive = <480>;
-					hback-porch = <88>;
-					hsync-len = <128>;
-					hfront-porch = <40>;
-					vback-porch = <33>;
-					vsync-len = <2>;
-					vfront-porch = <10>;
-					hsync-active = <0>;
-					vsync-active = <0>;
-					de-active = <1>;
-					pixelclk-active = <0>;
-				};
-
-				ETQ570 {
-					clock-frequency = <6596040>;
-					hactive = <320>;
-					vactive = <240>;
-					hback-porch = <38>;
-					hsync-len = <30>;
-					hfront-porch = <30>;
-					vback-porch = <16>;
-					vsync-len = <3>;
-					vfront-porch = <4>;
-					hsync-active = <0>;
-					vsync-active = <0>;
-					de-active = <1>;
-					pixelclk-active = <0>;
-				};
-			};
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		power-supply = <&reg_3v3>;
-		brightness-levels = <
-			  0  1  2  3  4  5  6  7  8  9
-			 10 11 12 13 14 15 16 17 18 19
-			 20 21 22 23 24 25 26 27 28 29
-			 30 31 32 33 34 35 36 37 38 39
-			 40 41 42 43 44 45 46 47 48 49
-			 50 51 52 53 54 55 56 57 58 59
-			 60 61 62 63 64 65 66 67 68 69
-			 70 71 72 73 74 75 76 77 78 79
-			 80 81 82 83 84 85 86 87 88 89
-			 90 91 92 93 94 95 96 97 98 99
-			100
-		>;
-		default-brightness-level = <50>;
-	};
-
-	regulators {
-		reg_lcd_pwr: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "LCD POWER";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			regulator-boot-on;
-		};
-
-		reg_lcd_reset: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "LCD RESET";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			regulator-boot-on;
-		};
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	sgtl5000: codec@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		VDDA-supply = <&reg_2v5>;
-		VDDIO-supply = <&reg_3v3>;
-		clocks = <&mclk>;
-	};
-
-	polytouch: edt-ft5x06@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_edt_ft5x06_1>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-		wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-	};
-
-	touchscreen: tsc2007@48 {
-		compatible = "ti,tsc2007";
-		reg = <0x48>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc2007>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <26 0>;
-		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
-		ti,x-plate-ohms = <660>;
-		wakeup-source;
-	};
-};
-
-&iomuxc {
-	imx53-tx53-x03x {
-		pinctrl_edt_ft5x06_1: edt-ft5x06grp-1 {
-			fsl,pins = <
-				MX53_PAD_NANDF_CS2__GPIO6_15 0x1f0 /* Interrupt */
-				MX53_PAD_EIM_A16__GPIO2_22   0x04 /* Reset */
-				MX53_PAD_EIM_A17__GPIO2_21   0x04 /* Wake */
-			>;
-		};
-
-		pinctrl_kpp: kppgrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_9__KPP_COL_6 0x1f4
-				MX53_PAD_GPIO_4__KPP_COL_7 0x1f4
-				MX53_PAD_KEY_COL2__KPP_COL_2 0x1f4
-				MX53_PAD_KEY_COL3__KPP_COL_3 0x1f4
-				MX53_PAD_GPIO_2__KPP_ROW_6 0x1f4
-				MX53_PAD_GPIO_5__KPP_ROW_7 0x1f4
-				MX53_PAD_KEY_ROW2__KPP_ROW_2 0x1f4
-				MX53_PAD_KEY_ROW3__KPP_ROW_3 0x1f4
-			>;
-		};
-
-		pinctrl_rgb24_vga1: rgb24-vgagrp1 {
-			fsl,pins = <
-				MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK		0x5
-				MX53_PAD_DI0_PIN15__IPU_DI0_PIN15		0x5
-				MX53_PAD_DI0_PIN2__IPU_DI0_PIN2			0x5
-				MX53_PAD_DI0_PIN3__IPU_DI0_PIN3			0x5
-				MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0		0x5
-				MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1		0x5
-				MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2		0x5
-				MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3		0x5
-				MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4		0x5
-				MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5		0x5
-				MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6		0x5
-				MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7		0x5
-				MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8		0x5
-				MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9		0x5
-				MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10		0x5
-				MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11		0x5
-				MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12		0x5
-				MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13		0x5
-				MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14		0x5
-				MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15		0x5
-				MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16		0x5
-				MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17		0x5
-				MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18		0x5
-				MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19		0x5
-				MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20		0x5
-				MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21		0x5
-				MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22		0x5
-				MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23		0x5
-			>;
-		};
-
-		pinctrl_tsc2007: tsc2007grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D26__GPIO3_26 0x1f0 /* Interrupt */
-			>;
-		};
-	};
-};
-
-&ipu_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp>;
-	/* sample keymap */
-	/* row/col 0,1 are mapped to KPP row/col 6,7 */
-	linux,keymap = <
-		MATRIX_KEY(6, 6, KEY_POWER)
-		MATRIX_KEY(6, 7, KEY_KP0)
-		MATRIX_KEY(6, 2, KEY_KP1)
-		MATRIX_KEY(6, 3, KEY_KP2)
-		MATRIX_KEY(7, 6, KEY_KP3)
-		MATRIX_KEY(7, 7, KEY_KP4)
-		MATRIX_KEY(7, 2, KEY_KP5)
-		MATRIX_KEY(7, 3, KEY_KP6)
-		MATRIX_KEY(2, 6, KEY_KP7)
-		MATRIX_KEY(2, 7, KEY_KP8)
-		MATRIX_KEY(2, 2, KEY_KP9)
-	>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-tx53-x13x.dts b/arch/arm/boot/dts/imx53-tx53-x13x.dts
deleted file mode 100644
index 3cf682a681f4..000000000000
--- a/arch/arm/boot/dts/imx53-tx53-x13x.dts
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- * Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx53-tx53.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Ka-Ro electronics TX53 module (LVDS)";
-	compatible = "karo,tx53", "fsl,imx53";
-
-	aliases {
-		display = &lvds0;
-		lvds0 = &lvds0;
-		lvds1 = &lvds1;
-	};
-
-	backlight0: backlight0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 0>;
-		power-supply = <&reg_3v3>;
-		brightness-levels = <
-			  0  1  2  3  4  5  6  7  8  9
-			 10 11 12 13 14 15 16 17 18 19
-			 20 21 22 23 24 25 26 27 28 29
-			 30 31 32 33 34 35 36 37 38 39
-			 40 41 42 43 44 45 46 47 48 49
-			 50 51 52 53 54 55 56 57 58 59
-			 60 61 62 63 64 65 66 67 68 69
-			 70 71 72 73 74 75 76 77 78 79
-			 80 81 82 83 84 85 86 87 88 89
-			 90 91 92 93 94 95 96 97 98 99
-			100
-		>;
-		default-brightness-level = <50>;
-	};
-
-	backlight1: backlight1 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 500000 0>;
-		power-supply = <&reg_3v3>;
-		brightness-levels = <
-			  0  1  2  3  4  5  6  7  8  9
-			 10 11 12 13 14 15 16 17 18 19
-			 20 21 22 23 24 25 26 27 28 29
-			 30 31 32 33 34 35 36 37 38 39
-			 40 41 42 43 44 45 46 47 48 49
-			 50 51 52 53 54 55 56 57 58 59
-			 60 61 62 63 64 65 66 67 68 69
-			 70 71 72 73 74 75 76 77 78 79
-			 80 81 82 83 84 85 86 87 88 89
-			 90 91 92 93 94 95 96 97 98 99
-			100
-		>;
-		default-brightness-level = <50>;
-	};
-
-	regulators {
-		reg_lcd_pwr0: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "LVDS0 POWER";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			regulator-boot-on;
-		};
-
-		reg_lcd_pwr1: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "LVDS1 POWER";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			regulator-boot-on;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	touchscreen2: eeti@04 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_eeti2>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <23 0>;
-		wakeup-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-		wakeup-source;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	sgtl5000: codec@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		VDDA-supply = <&reg_2v5>;
-		VDDIO-supply = <&reg_3v3>;
-		clocks = <&mclk>;
-	};
-
-	touchscreen1: eeti@04 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_eeti1>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <22 0>;
-		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		wakeup-source;
-	};
-};
-
-&iomuxc {
-	imx53-tx53-x13x {
-		pinctrl_i2c2: i2c2-grp1 {
-			fsl,pins = <
-				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
-				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_lvds0: lvds0grp {
-			fsl,pins = <
-				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
-				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
-				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
-				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
-				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
-			>;
-		};
-
-		pinctrl_lvds1: lvds1grp {
-			fsl,pins = <
-				MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
-				MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
-				MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
-				MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
-				MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <MX53_PAD_GPIO_9__PWM1_PWMO 0x04>;
-		};
-
-		pinctrl_eeti1: eeti1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D22__GPIO3_22 0x1f0 /* Interrupt */
-			>;
-		};
-
-		pinctrl_eeti2: eeti2grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D23__GPIO3_23 0x1f0 /* Interrupt */
-			>;
-		};
-	};
-};
-
-&ldb {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lvds0 &pinctrl_lvds1>;
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&lvds0_timing0>;
-
-			lvds0_timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hsync-len = <60>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vsync-len = <10>;
-				vfront-porch = <7>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			lvds0_timing1: nl12880bc20 {
-				clock-frequency = <71000000>;
-				hactive = <1280>;
-				vactive = <800>;
-				hback-porch = <50>;
-				hsync-len = <60>;
-				hfront-porch = <50>;
-				vback-porch = <5>;
-				vsync-len = <13>;
-				vfront-porch = <5>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-
-	lvds1: lvds-channel@1 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&lvds1_timing0>;
-
-			lvds1_timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hsync-len = <60>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vsync-len = <10>;
-				vfront-porch = <7>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
deleted file mode 100644
index 7807c1fa1101..000000000000
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ /dev/null
@@ -1,548 +0,0 @@
-/*
- * Copyright 2012 <LW@KARO-electronics.de>
- * based on imx53-qsb.dts
- *   Copyright 2011 Freescale Semiconductor, Inc.
- *   Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "imx53.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Ka-Ro electronics TX53 module";
-	compatible = "karo,tx53", "fsl,imx53";
-
-	aliases {
-		can0 = &can2; /* Make the can interface indices consistent with TX28/TX48 modules */
-		can1 = &can1;
-		ipu = &ipu;
-		reg_can_xcvr = &reg_can_xcvr;
-		usbh1 = &usbh1;
-		usbotg = &usbotg;
-	};
-
-	clocks {
-		ckih1 {
-			clock-frequency = <0>;
-		};
-
-		mclk: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <26000000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_key>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
-			linux,code = <116>; /* KEY_POWER */
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_stk5led>;
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2v5: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2V5";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-		};
-
-		reg_3v3: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		reg_can_xcvr: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "CAN XCVR";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_can_xcvr>;
-			gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-		};
-
-		reg_usbh1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usbh1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1_vbus>;
-			gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usbotg_vbus: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "usbotg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbotg_vbus>;
-			gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "karo,tx53-audio-sgtl5000", "fsl,imx-audio-sgtl5000";
-		model = "tx53-audio-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		/* '1' based port numbers according to datasheet names */
-		mux-int-port = <1>;
-		mux-ext-port = <5>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ssi1>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	cs-gpios = <
-		&gpio2 30 GPIO_ACTIVE_HIGH
-		&gpio3 19 GPIO_ACTIVE_HIGH
-	>;
-
-	spidev0: spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <54000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "spidev";
-		reg = <1>;
-		spi-max-frequency = <54000000>;
-	};
-};
-
-&esdhc1 {
-	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-	fsl,wp-controller;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	status = "okay";
-};
-
-&esdhc2 {
-	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-	fsl,wp-controller;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-	phy-handle = <&phy0>;
-	mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
-	status = "okay";
-
-	phy0: ethernet-phy@0 {
-		interrupt-parent = <&gpio2>;
-		interrupts = <4>;
-		device_type = "ethernet-phy";
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	rtc1: ds1339@68 {
-		compatible = "dallas,ds1339";
-		reg = <0x68>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ds1339>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <20 0>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-tx53 {
-		pinctrl_hog: hoggrp {
-			/* pins not in use by any device on the Starterkit board series */
-			fsl,pins = <
-				/* CMOS Sensor Interface */
-				MX53_PAD_CSI0_DAT12__GPIO5_30 0x1f4
-				MX53_PAD_CSI0_DAT13__GPIO5_31 0x1f4
-				MX53_PAD_CSI0_DAT14__GPIO6_0 0x1f4
-				MX53_PAD_CSI0_DAT15__GPIO6_1 0x1f4
-				MX53_PAD_CSI0_DAT16__GPIO6_2 0x1f4
-				MX53_PAD_CSI0_DAT17__GPIO6_3 0x1f4
-				MX53_PAD_CSI0_DAT18__GPIO6_4 0x1f4
-				MX53_PAD_CSI0_DAT19__GPIO6_5 0x1f4
-				MX53_PAD_CSI0_MCLK__GPIO5_19 0x1f4
-				MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1f4
-				MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1f4
-				MX53_PAD_GPIO_0__GPIO1_0 0x1f4
-				/* Module Specific Signal */
-				/* MX53_PAD_NANDF_CS2__GPIO6_15 0x1f4 maybe used by EDT-FT5x06 */
-				/* MX53_PAD_EIM_A16__GPIO2_22 0x1f4 maybe used by EDT-FT5x06 */
-				MX53_PAD_EIM_D29__GPIO3_29 0x1f4
-				MX53_PAD_EIM_EB3__GPIO2_31 0x1f4
-				/* MX53_PAD_EIM_A17__GPIO2_21 0x1f4 maybe used by EDT-FT5x06 */
-				/* MX53_PAD_EIM_A18__GPIO2_20 0x1f4 used by LED */
-				MX53_PAD_EIM_A19__GPIO2_19 0x1f4
-				MX53_PAD_EIM_A20__GPIO2_18 0x1f4
-				MX53_PAD_EIM_A21__GPIO2_17 0x1f4
-				MX53_PAD_EIM_A22__GPIO2_16 0x1f4
-				MX53_PAD_EIM_A23__GPIO6_6 0x1f4
-				MX53_PAD_EIM_A24__GPIO5_4 0x1f4
-				MX53_PAD_CSI0_DAT8__GPIO5_26 0x1f4
-				MX53_PAD_CSI0_DAT9__GPIO5_27 0x1f4
-				MX53_PAD_CSI0_DAT10__GPIO5_28 0x1f4
-				MX53_PAD_CSI0_DAT11__GPIO5_29 0x1f4
-				/* MX53_PAD_EIM_D22__GPIO3_22 0x1f4 maybe used by EETI touchpanel driver */
-				/* MX53_PAD_EIM_D23__GPIO3_23 0x1f4 maybe used by EETI touchpanel driver */
-				MX53_PAD_GPIO_13__GPIO4_3 0x1f4
-				MX53_PAD_EIM_CS0__GPIO2_23 0x1f4
-				MX53_PAD_EIM_CS1__GPIO2_24 0x1f4
-				MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1f4
-				MX53_PAD_EIM_WAIT__GPIO5_0 0x1f4
-				MX53_PAD_EIM_EB0__GPIO2_28 0x1f4
-				MX53_PAD_EIM_EB1__GPIO2_29 0x1f4
-				MX53_PAD_EIM_OE__GPIO2_25 0x1f4
-				MX53_PAD_EIM_LBA__GPIO2_27 0x1f4
-				MX53_PAD_EIM_RW__GPIO2_26 0x1f4
-				MX53_PAD_EIM_DA8__GPIO3_8 0x1f4
-				MX53_PAD_EIM_DA9__GPIO3_9 0x1f4
-				MX53_PAD_EIM_DA10__GPIO3_10 0x1f4
-				MX53_PAD_EIM_DA11__GPIO3_11 0x1f4
-				MX53_PAD_EIM_DA12__GPIO3_12 0x1f4
-				MX53_PAD_EIM_DA13__GPIO3_13 0x1f4
-				MX53_PAD_EIM_DA14__GPIO3_14 0x1f4
-				MX53_PAD_EIM_DA15__GPIO3_15 0x1f4
-				>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_7__CAN1_TXCAN		0x80000000
-				MX53_PAD_GPIO_8__CAN1_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_can2: can2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
-				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_can_xcvr: can-xcvrgrp {
-			fsl,pins = <MX53_PAD_DISP0_DAT0__GPIO4_21 0xe0>; /* Flexcan XCVR enable */
-		};
-
-		pinctrl_ds1339: ds1339grp {
-			fsl,pins = <MX53_PAD_DI0_PIN4__GPIO4_20 0xe0>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_19__ECSPI1_RDY		0x80000000
-				MX53_PAD_EIM_EB2__ECSPI1_SS0		0x80000000
-				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
-				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
-				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
-				MX53_PAD_EIM_D19__ECSPI1_SS1		0x80000000
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-				MX53_PAD_EIM_D24__GPIO3_24 0x1f0
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
-				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
-				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
-				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
-				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
-				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
-				MX53_PAD_EIM_D25__GPIO3_25 0x1f0
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_gpio_key: gpio-keygrp {
-			fsl,pins = <MX53_PAD_EIM_A25__GPIO5_2 0x1f4>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
-				MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_3__I2C3_SCL		0xc0000000
-				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
-			>;
-		};
-
-		pinctrl_nand: nandgrp {
-			fsl,pins = <
-				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
-				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
-				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
-				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
-				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
-				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
-				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
-				MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0	0xa4
-				MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1	0xa4
-				MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2	0xa4
-				MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3	0xa4
-				MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4	0xa4
-				MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5	0xa4
-				MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6	0xa4
-				MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7	0xa4
-			>;
-		};
-
-		pinctrl_pwm2: pwm2grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_1__PWM2_PWMO		0x80000000
-			>;
-		};
-
-		pinctrl_ssi1: ssi1grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
-				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
-				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
-				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_ssi2: ssi2grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC	0x80000000
-				MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD	0x80000000
-				MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS	0x80000000
-				MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD	0x80000000
-				MX53_PAD_EIM_D27__GPIO3_27 0x1f0
-			>;
-		};
-
-		pinctrl_stk5led: stk5ledgrp {
-			fsl,pins = <MX53_PAD_EIM_A18__GPIO2_20 0xc0>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-				MX53_PAD_PATA_RESET_B__UART1_CTS	0x1c5
-				MX53_PAD_PATA_IORDY__UART1_RTS		0x1c5
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1c5
-				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1c5
-				MX53_PAD_PATA_DIOR__UART2_RTS		0x1c5
-				MX53_PAD_PATA_INTRQ__UART2_CTS		0x1c5
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
-				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D30__GPIO3_30 0x100 /* OC */
-			>;
-		};
-
-		pinctrl_usbh1_vbus: usbh1-vbusgrp {
-			fsl,pins = <
-				MX53_PAD_EIM_D31__GPIO3_31 0xe0 /* VBUS ENABLE */
-			>;
-		};
-
-		pinctrl_usbotg_vbus: usbotg-vbusgrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_7__GPIO1_7 0xe0 /* VBUS ENABLE */
-				MX53_PAD_GPIO_8__GPIO1_8 0x100 /* OC */
-			>;
-		};
-	};
-};
-
-&ipu {
-	status = "okay";
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	#pwm-cells = <3>;
-};
-
-&sdma {
-	fsl,sdma-ram-script-name = "sdma-imx53.bin";
-};
-
-&ssi1 {
-	codec-handle = <&sgtl5000>;
-	status = "okay";
-};
-
-&ssi2 {
-	status = "disabled";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	phy_type = "utmi";
-	disable-over-current;
-	vbus-supply = <&reg_usbh1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	phy_type = "utmi";
-	dr_mode = "peripheral";
-	disable-over-current;
-	vbus-supply = <&reg_usbotg_vbus>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-usbarmory.dts b/arch/arm/boot/dts/imx53-usbarmory.dts
deleted file mode 100644
index 6782d7fc5961..000000000000
--- a/arch/arm/boot/dts/imx53-usbarmory.dts
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * USB armory MkI device tree file
- * https://inversepath.com/usbarmory
- *
- * Copyright (C) 2015, Inverse Path
- * Andrej Rosano <andrej@inversepath.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx53.dtsi"
-
-/ {
-	model = "Inverse Path USB armory";
-	compatible = "inversepath,imx53-usbarmory", "fsl,imx53";
-};
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory {
-		reg = <0x70000000 0x20000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		user {
-			label = "LED";
-			gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-/*
- * Not every i.MX53 P/N supports clock > 800MHz.
- * As USB armory does not mount a specific P/N set a safe clock upper limit.
- */
-&cpu0 {
-	operating-points = <
-		/* kHz */
-		166666  850000
-		400000  900000
-		800000 1050000
-	>;
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_esdhc1: esdhc1grp {
-		fsl,pins = <
-			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-		>;
-	};
-
-	pinctrl_i2c1_pmic: i2c1grp {
-		fsl,pins = <
-			MX53_PAD_EIM_D21__I2C1_SCL	0x80
-			MX53_PAD_EIM_D28__I2C1_SDA	0x80
-		>;
-	};
-
-	pinctrl_led: ledgrp {
-		fsl,pins = <
-			MX53_PAD_DISP0_DAT6__GPIO4_27 0x1e4
-		>;
-	};
-
-	/*
-	 * UART mode pin header configration
-	 * 3 - GPIO5[26], pull-down 100K
-	 * 4 - GPIO5[27], pull-down 100K
-	 * 5 - TX, pull-up 100K
-	 * 6 - RX, pull-up 100K
-	 * 7 - GPIO5[30], pull-down 100K
-	 */
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX53_PAD_CSI0_DAT8__GPIO5_26		0xc0
-			MX53_PAD_CSI0_DAT9__GPIO5_27		0xc0
-			MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
-			MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
-			MX53_PAD_CSI0_DAT12__GPIO5_30		0xc0
-		>;
-	};
-};
-
-&i2c1 {
-	pinctrl-0 = <&pinctrl_i2c1_pmic>;
-	status = "okay";
-
-	ltc3589: pmic@34 {
-		compatible = "lltc,ltc3589-2";
-		reg = <0x34>;
-
-		regulators {
-			sw1_reg: sw1 {
-				regulator-min-microvolt = <591930>;
-				regulator-max-microvolt = <1224671>;
-				lltc,fb-voltage-divider = <100000 158000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <704123>;
-				regulator-max-microvolt = <1456803>;
-				lltc,fb-voltage-divider = <180000 191000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <1341250>;
-				regulator-max-microvolt = <2775000>;
-				lltc,fb-voltage-divider = <270000 100000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			bb_out_reg: bb-out {
-				regulator-min-microvolt = <3387341>;
-				regulator-max-microvolt = <3387341>;
-				lltc,fb-voltage-divider = <511000 158000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo1_reg: ldo1 {
-				regulator-min-microvolt = <1306329>;
-				regulator-max-microvolt = <1306329>;
-				lltc,fb-voltage-divider = <100000 158000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo2_reg: ldo2 {
-				regulator-min-microvolt = <704123>;
-				regulator-max-microvolt = <1456806>;
-				lltc,fb-voltage-divider = <180000 191000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo3_reg: ldo3 {
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-boot-on;
-			};
-
-			ldo4_reg: ldo4 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3200000>;
-			};
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "peripheral";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts
deleted file mode 100644
index fc51b87ad208..000000000000
--- a/arch/arm/boot/dts/imx53-voipac-bsb.dts
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx53-voipac-dmm-668.dtsi"
-
-/ {
-	sound {
-		compatible = "fsl,imx53-voipac-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx53-voipac-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <5>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio>;
-
-		led1 {
-			label = "led-red";
-			gpios = <&gpio3 29 0>;
-			default-state = "off";
-		};
-
-		led2 {
-			label = "led-orange";
-			gpios = <&gpio2 31 0>;
-			default-state = "off";
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-voipac {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* SD2_CD */
-				MX53_PAD_EIM_D25__GPIO3_25	0x80000000
-				/* SD2_WP */
-				MX53_PAD_EIM_A19__GPIO2_19 	0x80000000
-			>;
-		};
-
-		led_pin_gpio: led_gpio {
-			fsl,pins = <
-				MX53_PAD_EIM_D29__GPIO3_29	0x80000000
-				MX53_PAD_EIM_EB3__GPIO2_31	0x80000000
-			>;
-		};
-
-		/* Keyboard controller */
-		pinctrl_kpp_1: kppgrp-1 {
-			fsl,pins = <
-				MX53_PAD_GPIO_9__KPP_COL_6	0xe8
-				MX53_PAD_GPIO_4__KPP_COL_7	0xe8
-				MX53_PAD_KEY_COL2__KPP_COL_2	0xe8
-				MX53_PAD_KEY_COL3__KPP_COL_3	0xe8
-				MX53_PAD_KEY_COL4__KPP_COL_4	0xe8
-				MX53_PAD_GPIO_2__KPP_ROW_6	0xe0
-				MX53_PAD_GPIO_5__KPP_ROW_7	0xe0
-				MX53_PAD_KEY_ROW2__KPP_ROW_2	0xe0
-				MX53_PAD_KEY_ROW3__KPP_ROW_3	0xe0
-				MX53_PAD_KEY_ROW4__KPP_ROW_4	0xe0
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
-				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
-				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
-				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
-				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
-				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
-				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
-				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
-				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_3__I2C3_SCL		0xc0000000
-				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
-			>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>; /* SSI1 */
-	status = "okay";
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	sgtl5000: codec@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-		clocks = <&clks 150>;
-	};
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp_1>;
-	linux,keymap = <
-			0x0203003b	/* KEY_F1 */
-			0x0603003c	/* KEY_F2 */
-			0x0207003d	/* KEY_F3 */
-			0x0607003e	/* KEY_F4 */
-			>;
-	keypad,num-rows = <8>;
-	keypad,num-columns = <1>;
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
deleted file mode 100644
index df8dafe2564d..000000000000
--- a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "imx53.dtsi"
-
-/ {
-	model = "Voipac i.MX53 X53-DMM-668";
-	compatible = "voipac,imx53-dmm-668", "fsl,imx53";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x20000000>;
-	};
-
-	memory@b0000000 {
-		device_type = "memory";
-		reg = <0xb0000000 0x20000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 31 0>; /* PEN */
-			enable-active-high;
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-voipac {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* Make DA9053 regulator functional */
-				MX53_PAD_GPIO_16__GPIO7_11	0x80000000
-				/* FEC Power enable */
-				MX53_PAD_GPIO_11__GPIO4_1	0x80000000
-				/* FEC RST */
-				MX53_PAD_GPIO_12__GPIO4_2	0x80000000
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
-				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
-				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
-				MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_nand: nandgrp {
-			fsl,pins = <
-				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
-				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
-				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
-				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
-				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
-				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
-				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
-				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
-				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
-				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
-				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
-				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
-				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
-				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
-				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
-			>;
-		};
-	};
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, <&gpio2 16 0>, <&gpio2 17 0>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic: dialog@48 {
-		compatible = "dlg,da9053-aa", "dlg,da9052";
-		reg = <0x48>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
-
-		regulators {
-			buck1_reg: buck1 {
-				regulator-name = "BUCKCORE";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-			};
-
-			buck2_reg: buck2 {
-				regulator-name = "BUCKPRO";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			buck3_reg: buck3 {
-				regulator-name = "BUCKMEM";
-				regulator-min-microvolt = <1420000>;
-				regulator-max-microvolt = <1580000>;
-				regulator-always-on;
-			};
-
-			buck4_reg: buck4 {
-				regulator-name = "BUCKPERI";
-				regulator-min-microvolt = <2370000>;
-				regulator-max-microvolt = <2630000>;
-				regulator-always-on;
-			};
-
-			ldo1_reg: ldo1 {
-				regulator-name = "ldo1_1v3";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo2_reg: ldo2 {
-				regulator-name = "ldo2_1v3";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: ldo3 {
-				regulator-name = "ldo3_3v3";
-				regulator-min-microvolt = <3250000>;
-				regulator-max-microvolt = <3350000>;
-				regulator-always-on;
-			};
-
-			ldo4_reg: ldo4 {
-				regulator-name = "ldo4_2v775";
-				regulator-min-microvolt = <2770000>;
-				regulator-max-microvolt = <2780000>;
-				regulator-always-on;
-			};
-
-			ldo5_reg: ldo5 {
-				regulator-name = "ldo5_3v3";
-				regulator-min-microvolt = <3250000>;
-				regulator-max-microvolt = <3350000>;
-				regulator-always-on;
-			};
-
-			ldo6_reg: ldo6 {
-				regulator-name = "ldo6_1v3";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: ldo7 {
-				regulator-name = "ldo7_2v75";
-				regulator-min-microvolt = <2700000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			ldo8_reg: ldo8 {
-				regulator-name = "ldo8_1v8";
-				regulator-min-microvolt = <1750000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-always-on;
-			};
-
-			ldo9_reg: ldo9 {
-				regulator-name = "ldo9_1v5";
-				regulator-min-microvolt = <1450000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: ldo10 {
-				regulator-name = "ldo10_1v3";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_vbus>;
-	phy_type = "utmi";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl-apf6dev.dts b/arch/arm/boot/dts/imx6dl-apf6dev.dts
deleted file mode 100644
index df26e542ab3a..000000000000
--- a/arch/arm/boot/dts/imx6dl-apf6dev.dts
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright 2015 Armadeus Systems
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-apf6.dtsi"
-#include "imx6qdl-apf6dev.dtsi"
-
-/ {
-	model = "Armadeus APF6 Solo Module on APF6Dev Board";
-	compatible = "armadeus,imx6dl-apf6dev", "armadeus,imx6dl-apf6", "fsl,imx6dl";
-
-	memory {
-		reg = <0x10000000 0x20000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
deleted file mode 100644
index 0677625463d6..000000000000
--- a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * support for the imx6 based aristainetos2 board
- *
- * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-aristainetos2.dtsi"
-
-/ {
-	model = "aristainetos2 i.MX6 Dual Lite Board 4";
-	compatible = "fsl,imx6dl";
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	display0: display@di0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp>;
-
-		port@0 {
-			reg = <0>;
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-			display_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&ecspi1 {
-	lcd_panel: display@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lg,lg4573";
-		spi-max-frequency = <10000000>;
-		reg = <0>;
-		power-on-delay = <10>;
-
-		display-timings {
-			480x800p57 {
-				native-mode;
-				clock-frequency = <27000027>;
-				hactive = <480>;
-				vactive = <800>;
-				hfront-porch = <10>;
-				hback-porch = <59>;
-				hsync-len = <10>;
-				vback-porch = <15>;
-				vfront-porch = <15>;
-				vsync-len = <15>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	touch: touch@4b {
-		compatible = "atmel,maxtouch";
-		reg = <0x4b>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <9 8>;
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&iomuxc {
-	pinctrl_ipu_disp: ipudisp1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x31
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0xE1
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0xE1
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0xE1
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0xE1
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0xE1
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0xE1
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0xE1
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0xE1
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0xE1
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0xE1
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0xE1
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0xE1
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0xE1
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0xE1
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0xE1
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0xe1
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0xE1
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0xE1
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0xE1
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0xE1
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0xE1
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0xE1
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0xE1
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0xE1
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0xE1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts
deleted file mode 100644
index 805b1318b7f7..000000000000
--- a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * support for the imx6 based aristainetos2 board
- *
- * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-aristainetos2.dtsi"
-
-/ {
-	model = "aristainetos2 i.MX6 Dual Lite Board 7";
-	compatible = "fsl,imx6dl";
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	panel: panel {
-		compatible = "lg,lb070wv8";
-		backlight = <&backlight>;
-		enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	touch: touch@4d {
-		compatible = "atmel,maxtouch";
-		reg = <0x4d>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <9 8>;
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-			lvds0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_lvds0>;
-			};
-		};
-
-		port@4 {
-			reg = <4>;
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
deleted file mode 100644
index 32a812b1839e..000000000000
--- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * support fot the imx6 based aristainetos board
- *
- * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-aristainetos.dtsi"
-
-/ {
-	model = "aristainetos i.MX6 Dual Lite Board 4";
-	compatible = "fsl,imx6dl";
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		enable-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		status = "okay";
-	};
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	soc {
-		display0: display@di0 {
-			compatible = "fsl,imx-parallel-display";
-			interface-pix-fmt = "rgb24";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_ipu_disp>;
-			status = "okay";
-
-			display-timings {
-				480x800p60 {
-					native-mode;
-					clock-frequency = <30000000>;
-					hactive = <480>;
-					vactive = <800>;
-					hfront-porch = <59>;
-					hback-porch = <10>;
-					hsync-len = <10>;
-					vback-porch = <15>;
-					vfront-porch = <15>;
-					vsync-len = <15>;
-					hsync-active = <1>;
-					vsync-active = <1>;
-				};
-			};
-
-			port {
-				display0_in: endpoint {
-					remote-endpoint = <&ipu1_di0_disp0>;
-				};
-			};
-		};
-	};
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&pwm1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
deleted file mode 100644
index 15203f0e9725..000000000000
--- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * support fot the imx6 based aristainetos board
- *
- * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-aristainetos.dtsi"
-
-/ {
-	model = "aristainetos i.MX6 Dual Lite Board 7";
-	compatible = "fsl,imx6dl";
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	soc {
-		display0: display@di0 {
-			compatible = "fsl,imx-parallel-display";
-			interface-pix-fmt = "rgb24";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_ipu_disp>;
-			status = "okay";
-
-			display-timings {
-				800x480p60 {
-					native-mode;
-					clock-frequency = <33246000>;
-					hactive = <800>;
-					vactive = <480>;
-					hfront-porch = <88>;
-					hback-porch = <88>;
-					hsync-len = <80>;
-					vback-porch = <10>;
-					vfront-porch = <10>;
-					vsync-len = <25>;
-					vsync-active = <1>;
-				};
-			};
-
-			port {
-				display0_in: endpoint {
-					remote-endpoint = <&ipu1_di0_disp0>;
-				};
-			};
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 3000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&pwm3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
deleted file mode 100644
index 26541538562c..000000000000
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * Copyright 2014-2016 Toradex AG
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6dl.dtsi"
-#include "imx6qdl-colibri.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6DL/S on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl",
-		     "fsl,imx6dl";
-
-	aliases {
-		i2c0 = &i2c2;
-		i2c1 = &i2c3;
-	};
-
-	aliases {
-		rtc0 = &rtc_i2c;
-		rtc1 = &snvs_rtc;
-	};
-
-	clocks {
-		/* Fixed crystal dedicated to mcp251x */
-		clk16m: clk@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-frequency = <16000000>;
-			clock-output-names = "clk16m";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		wakeup {
-			label = "Wake-Up";
-			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	lcd_display: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel: panel {
-		/*
-		 * edt,et057090dhu: EDT 5.7" LCD TFT
-		 * edt,et070080dh6: EDT 7.0" LCD TFT
-		 */
-		compatible = "edt,et057090dhu";
-		backlight = <&backlight>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-};
-
-&backlight {
-	brightness-levels = <0 127 191 223 239 247 251 255>;
-	default-brightness-level = <1>;
-	status = "okay";
-};
-
-/* Colibri SSP */
-&ecspi4 {
-	status = "okay";
-
-	mcp251x0: mcp251x@1 {
-		compatible = "microchip,mcp2515";
-		reg = <0>;
-		clocks = <&clk16m>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <27 0x2>;
-		spi-max-frequency = <10000000>;
-		status = "okay";
-	};
-};
-
-&hdmi {
-	status = "okay";
-};
-
-/*
- * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
- */
-&i2c3 {
-	status = "okay";
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc_i2c: rtc@68 {
-		compatible = "st,m41t00";
-		reg = <0x68>;
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&reg_usb_host_vbus {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_host_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	status = "okay";
-};
-
-/* Colibri MMC */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_mmc_cd>;
-	cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */
-	status = "okay";
-};
-
-&weim {
-	status = "okay";
-
-	/* weim memory map: 32MB on CS0, 32MB on CS1, 32MB on CS2 */
-	ranges = <0 0 0x08000000 0x02000000
-		  1 0 0x0a000000 0x02000000
-		  2 0 0x0c000000 0x02000000>;
-
-	/* SRAM on Colibri nEXT_CS0 */
-	sram@0,0 {
-		compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram";
-		reg = <0 0 0x00010000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		bank-width = <2>;
-		fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
-				      0x00000000 0x04000040 0x00000000>;
-	};
-
-	/* SRAM on Colibri nEXT_CS1 */
-	sram@1,0 {
-		compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram";
-		reg = <1 0 0x00010000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		bank-width = <2>;
-		fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
-				      0x00000000 0x04000040 0x00000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts b/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts
deleted file mode 100644
index 994f96a3fb54..000000000000
--- a/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright 2013 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __DTS_V1__
-#define __DTS_V1__
-/dts-v1/;
-#endif
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-dfi-fs700-m60.dtsi"
-
-/ {
-	model = "DFI FS700-M60-6DL i.MX6dl Q7 Board";
-	compatible = "dfi,fs700-m60-6dl", "dfi,fs700e-m60", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw51xx.dts b/arch/arm/boot/dts/imx6dl-gw51xx.dts
deleted file mode 100644
index b2bd022fc6be..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw51xx.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw51xx.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW51XX";
-	compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw52xx.dts b/arch/arm/boot/dts/imx6dl-gw52xx.dts
deleted file mode 100644
index a2e0b73fdd4a..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw52xx.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw52xx.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW52XX";
-	compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw53xx.dts b/arch/arm/boot/dts/imx6dl-gw53xx.dts
deleted file mode 100644
index 6844b708d2f8..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw53xx.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw53xx.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW53XX";
-	compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw54xx.dts b/arch/arm/boot/dts/imx6dl-gw54xx.dts
deleted file mode 100644
index be915412f852..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw54xx.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw54xx.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW54XX";
-	compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw551x.dts b/arch/arm/boot/dts/imx6dl-gw551x.dts
deleted file mode 100644
index 82d5f85722ea..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw551x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2014 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw551x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW551X";
-	compatible = "gw,imx6dl-gw551x", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw552x.dts b/arch/arm/boot/dts/imx6dl-gw552x.dts
deleted file mode 100644
index a4b700cef188..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw552x.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright 2014 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw552x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW552X";
-	compatible = "gw,imx6dl-gw552x", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw553x.dts b/arch/arm/boot/dts/imx6dl-gw553x.dts
deleted file mode 100644
index 59b8afc36e66..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw553x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2016 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw553x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW553X";
-	compatible = "gw,imx6dl-gw553x", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw560x.dts b/arch/arm/boot/dts/imx6dl-gw560x.dts
deleted file mode 100644
index 21bdfaf8df53..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw560x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw560x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW560X";
-	compatible = "gw,imx6dl-gw560x", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw5903.dts b/arch/arm/boot/dts/imx6dl-gw5903.dts
deleted file mode 100644
index 103261ea9334..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw5903.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw5903.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Duallite/Solo GW5903";
-	compatible = "gw,imx6dl-gw5903", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw5904.dts b/arch/arm/boot/dts/imx6dl-gw5904.dts
deleted file mode 100644
index 9c6d3cd3d6a7..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw5904.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw5904.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5904";
-	compatible = "gw,imx6dl-gw5904", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-icore-rqs.dts b/arch/arm/boot/dts/imx6dl-icore-rqs.dts
deleted file mode 100644
index cf42c2f5cdc7..000000000000
--- a/arch/arm/boot/dts/imx6dl-icore-rqs.dts
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-icore-rqs.dtsi"
-
-/ {
-	model = "Engicam i.CoreM6 DualLite/Solo RQS Starter Kit";
-	compatible = "engicam,imx6-icore-rqs", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/imx6dl-icore.dts
deleted file mode 100644
index 6de83c72bd72..000000000000
--- a/arch/arm/boot/dts/imx6dl-icore.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-icore.dtsi"
-
-/ {
-	model = "Engicam i.CoreM6 DualLite/Solo Starter Kit";
-	compatible = "engicam,imx6-icore", "fsl,imx6dl";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/imx6dl-nit6xlite.dts
deleted file mode 100644
index 30ce2c0cec2b..000000000000
--- a/arch/arm/boot/dts/imx6dl-nit6xlite.dts
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copyright 2015 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-nit6xlite.dtsi"
-
-/ {
-	model = "Boundary Devices i.MX6 Solo Nitrogen6_Lite Board";
-	compatible = "boundary,imx6dl-nit6xlite", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts
deleted file mode 100644
index ec53d7a09572..000000000000
--- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright 2013 Boundary Devices, Inc.
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-nitrogen6x.dtsi"
-
-/ {
-	model = "Boundary Devices i.MX6 DualLite Nitrogen6x Board";
-	compatible = "boundary,imx6dl-nitrogen6x", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts b/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts
deleted file mode 100644
index 08e97801494e..000000000000
--- a/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx6dl-phytec-pfla02.dtsi"
-#include "imx6qdl-phytec-pbab01.dtsi"
-
-/ {
-	model = "Phytec phyFLEX-i.MX6 DualLite/Solo Carrier-Board";
-	compatible = "phytec,imx6dl-pbab01", "phytec,imx6dl-pfla02", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi
deleted file mode 100644
index 964bc2ad3c5d..000000000000
--- a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-phytec-pfla02.dtsi"
-
-/ {
-	model = "Phytec phyFLEX-i.MX6 DualLite/Solo";
-	compatible = "phytec,imx6dl-pfla02", "fsl,imx6dl";
-
-	memory {
-		reg = <0x10000000 0x20000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/imx6dl-rex-basic.dts
deleted file mode 100644
index c3a14a4330a2..000000000000
--- a/arch/arm/boot/dts/imx6dl-rex-basic.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright 2014 FEDEVEL, Inc.
- *
- * Author: Robert Nelson <robertcnelson@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-rex.dtsi"
-
-/ {
-	model = "Rex Basic i.MX6 Dual Lite Board";
-	compatible = "rex,imx6dl-rex-basic", "fsl,imx6dl";
-
-	memory {
-		reg = <0x10000000 0x20000000>;
-	};
-};
-
-&ecspi3 {
-	flash: m25p80@0 {
-		compatible = "sst,sst25vf016b", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
deleted file mode 100644
index 29b45f2e64e0..000000000000
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ /dev/null
@@ -1,539 +0,0 @@
-/*
- * Copyright 2014 Iain Paton <ipaton0@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "RIoTboard i.MX6S";
-	compatible = "riot,imx6s-riotboard", "fsl,imx6dl";
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		led0: user1 {
-			label = "user1";
-			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: user2 {
-			label = "user2";
-			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx6-riotboard-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-			mux-int-port = <1>;
-			mux-ext-port = <3>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	pmic: pf0100@08 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <16 8>;
-
-		regulators {
-			reg_vddcore: sw1ab {				/* VDDARM_IN */
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-always-on;
-			};
-
-			reg_vddsoc: sw1c {				/* VDDSOC_IN */
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-always-on;
-			};
-
-			reg_gen_3v3: sw2 {				/* VDDHIGH_IN */
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			reg_ddr_1v5a: sw3a {				/* NVCC_DRAM, NVCC_RGMII */
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-always-on;
-			};
-
-			reg_ddr_1v5b: sw3b {				/* NVCC_DRAM, NVCC_RGMII */
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-always-on;
-			};
-
-			reg_ddr_vtt: sw4 {				/* MIPI conn */
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-always-on;
-			};
-
-			reg_5v_600mA: swbst {				/* not used */
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			reg_snvs_3v: vsnvs {				/* VDD_SNVS_IN */
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {				/* VREF_DDR */
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_vgen1_1v5: vgen1 {				/* not used */
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			reg_vgen2_1v2_eth: vgen2 {			/* pcie ? */
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			reg_vgen3_2v8: vgen3 {				/* not used */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-			reg_vgen4_1v8: vgen4 {				/* NVCC_SD3 */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			reg_vgen5_2v5_sgtl: vgen5 {			/* Pwr LED & 5V0_delayed enable */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			reg_vgen6_3v3: vgen6 {				/* #V#_DELAYED enable, MIPI */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	clocks = <&clks 116>;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbh1 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	vmmc-supply = <&reg_3p3v>;
-	non-removable;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-
-	imx6-riotboard {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0		/* CAM_MCLK */
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x000b1		/* CS0 */
-			>;
-		};
-
-		pinctrl_ecspi2: ecspi2grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x000b1		/* CS1 */
-				MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000b1		/* CS0 */
-				MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x100b1
-			>;
-		};
-
-		pinctrl_ecspi3: ecspi3grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1		/* CS0 */
-				MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x000b1		/* CS1 */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1		/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030		/* AR8035 pin strapping: IO voltage: pull up */
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030		/* AR8035 pin strapping: PHYADDR#0: pull down */
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030		/* AR8035 pin strapping: PHYADDR#1: pull down */
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030		/* AR8035 pin strapping: MODE#1: pull up */
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030		/* AR8035 pin strapping: MODE#3: pull up */
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0		/* AR8035 pin strapping: MODE#0: pull down */
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8	/* GPIO16 -> AR8035 25MHz */
-				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0		/* RGMII_nRST */
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x180b0		/* AR8035 interrupt */
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c4: i2c4grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_7__I2C4_SCL             0x4001b8b1
-				MX6QDL_PAD_GPIO_8__I2C4_SDA             0x4001b8b1
-			>;
-		};
-
-		pinctrl_led: ledgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1	/* user led0 */
-				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b1	/* user led1 */
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm2: pwm2grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT9__PWM2_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0	/* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */
-				MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* SD2 CD */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1f0b0	/* SD2 WP */
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0	/* SD3 CD */
-				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1f0b0	/* SD3 WP */
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x17059	/* SD4 RST (eMMC) */
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-sabreauto.dts b/arch/arm/boot/dts/imx6dl-sabreauto.dts
deleted file mode 100644
index a6ce7b487ad7..000000000000
--- a/arch/arm/boot/dts/imx6dl-sabreauto.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-sabreauto.dtsi"
-
-/ {
-	model = "Freescale i.MX6 DualLite/Solo SABRE Automotive Board";
-	compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-sabresd.dts b/arch/arm/boot/dts/imx6dl-sabresd.dts
deleted file mode 100644
index 9607afe088fc..000000000000
--- a/arch/arm/boot/dts/imx6dl-sabresd.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-sabresd.dtsi"
-
-/ {
-	model = "Freescale i.MX6 DualLite SABRE Smart Device Board";
-	compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
-};
-
-&ipu1_csi1_from_ipu1_csi1_mux {
-	clock-lanes = <0>;
-	data-lanes = <1 2>;
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
deleted file mode 100644
index aac42ac465b6..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6DL Module on CoMpact TFT";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
-	aliases {
-		display = &display;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 0>;
-		power-supply = <&reg_3v3>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	display: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0_1>;
-		status = "okay";
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		display-timings {
-			native-mode = <&ET070001DM6>;
-
-			ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&can1 {
-	status = "disabled";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&kpp {
-	status = "disabled";
-};
-
-&reg_can_xcvr {
-	status = "disabled";
-};
-
-&touchscreen {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts
deleted file mode 100644
index ff8f7b1c4282..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * Copyright 2015-2016 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6S-8034 Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
-	aliases {
-		display = &display;
-		ipu1 = &ipu1;
-	};
-
-	cpus {
-		/delete-node/ cpu@1;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd0_pwr>;
-		enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-		power-supply = <&reg_lcd1_pwr>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	display: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0_2>;
-		interface-pix-fmt = "rgb24";
-		status = "okay";
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		display-timings {
-			native-mode = <&vga>;
-
-			vga: VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hsync-len = <96>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vsync-len = <2>;
-				vfront-porch = <12>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETV570 {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0350 {
-				clock-frequency = <6413760>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <34>;
-				hsync-len = <34>;
-				hfront-porch = <20>;
-				vback-porch = <15>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0430 {
-				clock-frequency = <9009000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <2>;
-				hsync-len = <41>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vsync-len = <10>;
-				vfront-porch = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0500 {
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0700 { /* same as ET0500 */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETQ570 {
-				clock-frequency = <6596040>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <38>;
-				hsync-len = <30>;
-				hfront-porch = <30>;
-				vback-porch = <16>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&pinctrl_usdhc1 {
-	fsl,pins = <
-		MX6QDL_PAD_SD1_CMD__SD1_CMD		0x070b1
-		MX6QDL_PAD_SD1_CLK__SD1_CLK		0x070b1
-		MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x070b1
-		MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x070b1
-		MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x070b1
-		MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x070b1
-		MX6QDL_PAD_SD3_CMD__GPIO7_IO02		0x170b0 /* SD1 CD */
-	>;
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&reg_lcd0_pwr {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts
deleted file mode 100644
index f988950e9443..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * Copyright 2015-2016 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6S-8035 Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
-	aliases {
-		display = &display;
-		ipu1 = &ipu1;
-	};
-
-	cpus {
-		/delete-node/ cpu@1;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd0_pwr>;
-		enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-		power-supply = <&reg_lcd1_pwr>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	display: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0_2>;
-		interface-pix-fmt = "rgb24";
-		status = "okay";
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		display-timings {
-			native-mode = <&vga>;
-
-			vga: VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hsync-len = <96>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vsync-len = <2>;
-				vfront-porch = <12>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETV570 {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0350 {
-				clock-frequency = <6413760>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <34>;
-				hsync-len = <34>;
-				hfront-porch = <20>;
-				vback-porch = <15>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0430 {
-				clock-frequency = <9009000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <2>;
-				hsync-len = <41>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vsync-len = <10>;
-				vfront-porch = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0500 {
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0700 { /* same as ET0500 */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETQ570 {
-				clock-frequency = <6596040>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <38>;
-				hsync-len = <30>;
-				hfront-porch = <30>;
-				vback-porch = <16>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&reg_lcd0_pwr {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
deleted file mode 100644
index d1f1298ec55a..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-801x Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
-	aliases {
-		display = &display;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		power-supply = <&reg_3v3>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	display: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0_1>;
-		status = "okay";
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		display-timings {
-			VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hsync-len = <96>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vsync-len = <2>;
-				vfront-porch = <12>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETV570 {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0350 {
-				clock-frequency = <6413760>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <34>;
-				hsync-len = <34>;
-				hfront-porch = <20>;
-				vback-porch = <15>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0430 {
-				clock-frequency = <9009000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <2>;
-				hsync-len = <41>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vsync-len = <10>;
-				vfront-porch = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0500 {
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0700 { /* same as ET0500 */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETQ570 {
-				clock-frequency = <6596040>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <38>;
-				hsync-len = <30>;
-				hfront-porch = <30>;
-				vback-porch = <16>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts
deleted file mode 100644
index 4d3204a56f46..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-8033 Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
-	aliases {
-		display = &display;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd0_pwr>;
-		enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-		power-supply = <&reg_lcd1_pwr>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	display: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0_2>;
-		interface-pix-fmt = "rgb24";
-		status = "okay";
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		display-timings {
-			native-mode = <&vga>;
-
-			vga: VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hsync-len = <96>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vsync-len = <2>;
-				vfront-porch = <12>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETV570 {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0350 {
-				clock-frequency = <6413760>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <34>;
-				hsync-len = <34>;
-				hfront-porch = <20>;
-				vback-porch = <15>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0430 {
-				clock-frequency = <9009000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <2>;
-				hsync-len = <41>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vsync-len = <10>;
-				vfront-porch = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0500 {
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0700 { /* same as ET0500 */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETQ570 {
-				clock-frequency = <6596040>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <38>;
-				hsync-len = <30>;
-				hfront-porch = <30>;
-				vback-porch = <16>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&reg_lcd0_pwr {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
deleted file mode 100644
index 5e0c6bb49f37..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-811x Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
-	aliases {
-		display = &lvds0;
-		lvds0 = &lvds0;
-		lvds1 = &lvds1;
-	};
-
-	backlight0: backlight0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 0>;
-		power-supply = <&reg_lcd0_pwr>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	backlight1: backlight1 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 500000 0>;
-		power-supply = <&reg_lcd1_pwr>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-};
-
-&i2c3 {
-	polytouch2: eeti@04 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_eeti>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <22 0>;
-		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		wakeup-source;
-	};
-};
-
-&kpp {
-	status = "disabled"; /* pad conflict with backlight1 PWM */
-};
-
-&ldb {
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&lvds_timing0>;
-			lvds_timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-
-	lvds1: lvds-channel@1 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "disabled";
-
-		display-timings {
-			native-mode = <&lvds_timing1>;
-			lvds_timing1: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_eeti: eetigrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
deleted file mode 100644
index b9a783f7160e..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * Copyright 2016 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-81xx Module on MB7 baseboard";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
-	aliases {
-		display = &lvds0;
-		lvds0 = &lvds0;
-		lvds1 = &lvds1;
-	};
-
-	backlight0: backlight0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		power-supply = <&reg_lcd0_pwr>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	backlight1: backlight1 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
-		power-supply = <&reg_lcd1_pwr>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-};
-
-&can1 {
-	status = "disabled";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&i2c3 {
-	polytouch1: eeti@04 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_eeti>;
-		interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		wakeup-source;
-	};
-};
-
-&kpp {
-	status = "disabled"; /* pads partially clash with backlight1 PWM */
-};
-
-&ldb {
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&lvds0_timing1>;
-
-			lvds0_timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			lvds0_timing1: VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vfront-porch = <12>;
-				hsync-len = <96>;
-				vsync-len = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			lvds0_timing2: nl12880bc20 {
-				clock-frequency = <71000000>;
-				hactive = <1280>;
-				vactive = <800>;
-				hback-porch = <50>;
-				hfront-porch = <50>;
-				vback-porch = <5>;
-				vfront-porch = <5>;
-				hsync-len = <60>;
-				vsync-len = <13>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-
-	lvds1: lvds-channel@1 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&lvds1_timing2>;
-
-			lvds1_timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			lvds1_timing1: VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vfront-porch = <12>;
-				hsync-len = <96>;
-				vsync-len = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			lvds1_timing2: nl12880bc20 {
-				clock-frequency = <71000000>;
-				hactive = <1280>;
-				vactive = <800>;
-				hback-porch = <50>;
-				hfront-porch = <50>;
-				vback-porch = <5>;
-				vfront-porch = <5>;
-				hsync-len = <60>;
-				vsync-len = <13>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_eeti: eetigrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-udoo.dts b/arch/arm/boot/dts/imx6dl-udoo.dts
deleted file mode 100644
index e3713f00e819..000000000000
--- a/arch/arm/boot/dts/imx6dl-udoo.dts
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-udoo.dtsi"
-
-/ {
-	model = "Udoo i.MX6 Dual-lite Board";
-	compatible = "udoo,imx6dl-udoo", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
deleted file mode 100644
index 8c314eee4fdd..000000000000
--- a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-wandboard-revb1.dtsi"
-
-/ {
-	model = "Wandboard i.MX6 Dual Lite Board rev B1";
-	compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-wandboard.dts b/arch/arm/boot/dts/imx6dl-wandboard.dts
deleted file mode 100644
index bbb616723097..000000000000
--- a/arch/arm/boot/dts/imx6dl-wandboard.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-wandboard-revc1.dtsi"
-
-/ {
-	model = "Wandboard i.MX6 Dual Lite Board";
-	compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
deleted file mode 100644
index 88cc7f51a4e9..000000000000
--- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * Copyright 2014-2016 Toradex AG
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6q.dtsi"
-#include "imx6qdl-apalis.dtsi"
-
-/ {
-	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board";
-	compatible = "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q",
-		     "fsl,imx6q";
-
-	aliases {
-		i2c0 = &i2cddc;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-	};
-
-	aliases {
-		rtc0 = &rtc_i2c;
-		rtc1 = &snvs_rtc;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		wakeup {
-			label = "Wake-Up";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	lcd_display: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di1_disp1>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel: panel {
-		/*
-		 * edt,et057090dhu: EDT 5.7" LCD TFT
-		 * edt,et070080dh6: EDT 7.0" LCD TFT
-		 */
-		compatible = "edt,et057090dhu";
-		backlight = <&backlight>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds_ixora>;
-
-		led4-green {
-			label = "LED_4_GREEN";
-			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
-		};
-
-		led4-red {
-			label = "LED_4_RED";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-		};
-
-		led5-green {
-			label = "LED_5_GREEN";
-			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		led5-red {
-			label = "LED_5_RED";
-			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&backlight {
-	brightness-levels = <0 127 191 223 239 247 251 255>;
-	default-brightness-level = <1>;
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2cddc>;
-	status = "okay";
-};
-
-&i2cddc {
-	status = "okay";
-};
-
-/* GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
-&i2c1 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-	};
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc_i2c: rtc@68 {
-		compatible = "st,m41t00";
-		reg = <0x68>;
-	};
-};
-
-&ipu1_di1_disp1 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-};
-
-&pcie {
-	/* active-high meaning opposite of regular PERST# active-low polarity */
-	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	reset-gpio-active-high;
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&reg_usb_otg_vbus {
-	status = "okay";
-};
-
-&reg_usb_host_vbus {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&sound_spdif {
-	status = "okay";
-};
-
-&spdif {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_host_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	status = "okay";
-};
-
-/* SD1 */
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sd_cd>;
-	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&iomuxc {
-	/*
-	 * Mux the Apalis GPIOs
-	 * GPIO5, 6 used by optional fusion_F0710A kernel module
-	 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
-		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
-		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
-		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
-		    >;
-
-	pinctrl_leds_ixora: ledsixoragrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
-			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
-			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-apf6dev.dts b/arch/arm/boot/dts/imx6q-apf6dev.dts
deleted file mode 100644
index 4e4de821d9e5..000000000000
--- a/arch/arm/boot/dts/imx6q-apf6dev.dts
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright 2015 Armadeus Systems
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-apf6.dtsi"
-#include "imx6qdl-apf6dev.dtsi"
-
-/ {
-	model = "Armadeus APF6 Quad / Dual Module on APF6Dev Board";
-	compatible = "armadeus,imx6q-apf6dev", "armadeus,imx6q-apf6", "fsl,imx6q";
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
deleted file mode 100644
index 4989d0bff10f..000000000000
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6q.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad Armadillo2 Board";
-	compatible = "fsl,imx6q-arm2", "fsl,imx6q";
-
-	memory {
-		reg = <0x10000000 0x80000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		debug-led {
-			label = "Heartbeat";
-			gpios = <&gpio3 25 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "disabled"; /* gpmi nand conflicts with SD */
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-arm2 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x80000000
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B	0x1b0b1
-				MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3_cdwp: usdhc3cdwp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000
-				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3
-		     &pinctrl_usdhc3_cdwp>;
-	status = "okay";
-};
-
-&usdhc4 {
-	non-removable;
-	vmmc-supply = <&reg_3p3v>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,dte-mode;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts
deleted file mode 100644
index 404a93d9596b..000000000000
--- a/arch/arm/boot/dts/imx6q-b450v3.dts
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Copyright 2015 Timesys Corporation.
- * Copyright 2015 General Electric Company
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6q-bx50v3.dtsi"
-
-/ {
-	model = "General Electric B450v3";
-	compatible = "ge,imx6q-b450v3", "advantech,imx6q-ba16", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	panel-lvds0 {
-		compatible = "innolux,g121x1-l03";
-		backlight = <&backlight_lvds>;
-		power-supply = <&reg_lvds>;
-
-		port {
-			panel_in_lvds0: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ldb {
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <24>;
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in_lvds0>;
-			};
-		};
-	};
-};
-
-&pca9539 {
-	P04 {
-		gpio-hog;
-		gpios = <4 0>;
-		output-low;
-		line-name = "PCA9539-P04";
-	};
-
-	P05 {
-		gpio-hog;
-		gpios = <5 0>;
-		output-low;
-		line-name = "PCA9539-P05";
-	};
-
-        P07 {
-                gpio-hog;
-                gpios = <7 0>;
-                output-low;
-                line-name = "PCA9539-P07";
-        };
-};
diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts
deleted file mode 100644
index 7f9f176901d4..000000000000
--- a/arch/arm/boot/dts/imx6q-b650v3.dts
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Copyright 2015 Timesys Corporation.
- * Copyright 2015 General Electric Company
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6q-bx50v3.dtsi"
-
-/ {
-	model = "General Electric B650v3";
-	compatible = "ge,imx6q-b650v3", "advantech,imx6q-ba16", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	panel-lvds0 {
-		compatible = "innolux,g121x1-l03";
-		backlight = <&backlight_lvds>;
-		power-supply = <&reg_lvds>;
-
-		port {
-			panel_in_lvds0: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ldb {
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <24>;
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in_lvds0>;
-			};
-		};
-	};
-};
-
-&pca9539 {
-	P05 {
-		gpio-hog;
-		gpios = <5 0>;
-		output-low;
-		line-name = "PCA9539-P05";
-	};
-
-        P07 {
-                gpio-hog;
-                gpios = <7 0>;
-                output-low;
-                line-name = "PCA9539-P07";
-        };
-};
-
-&usbphy1 {
-	fsl,tx-cal-45-dn-ohms = <55>;
-	fsl,tx-cal-45-dp-ohms = <55>;
-	fsl,tx-d-cal = <100>;
-};
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
deleted file mode 100644
index 2c1e98e0cf7b..000000000000
--- a/arch/arm/boot/dts/imx6q-b850v3.dts
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Copyright 2015 Timesys Corporation.
- * Copyright 2015 General Electric Company
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6q-bx50v3.dtsi"
-
-/ {
-	model = "General Electric B850v3";
-	compatible = "ge,imx6q-b850v3", "advantech,imx6q-ba16", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart3;
-	};
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
-			  <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
-			  <&clks IMX6QDL_CLK_IPU1_DI1_PRE_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
-				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>;
-};
-
-&ldb {
-	fsl,dual-channel;
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <24>;
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&stdp4028_in>;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	pca9547_ddc: mux@70 {
-		compatible = "nxp,pca9547";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mux2_i2c1: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0>;
-		};
-
-		mux2_i2c2: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x1>;
-		};
-
-		mux2_i2c3: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x2>;
-		};
-
-		mux2_i2c4: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x3>;
-		};
-
-		mux2_i2c5: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x4>;
-		};
-
-		mux2_i2c6: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x5>;
-		};
-
-		mux2_i2c7: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x6>;
-		};
-
-		mux2_i2c8: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x7>;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&mux2_i2c1>;
-};
-
-&mux1_i2c1 {
-	ads7830@4a {
-		compatible = "ti,ads7830";
-		reg = <0x4a>;
-	};
-};
-
-&mux2_i2c2 {
-	clock-frequency = <100000>;
-
-	stdp2690@72 {
-		compatible = "megachips,stdp2690-ge-b850v3-fw";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x72>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				stdp2690_in: endpoint {
-					remote-endpoint = <&stdp4028_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				stdp2690_out: endpoint {
-					/* Connector for external display */
-				};
-			};
-		};
-	};
-
-	stdp4028@73 {
-		compatible = "megachips,stdp4028-ge-b850v3-fw";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x73>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				stdp4028_in: endpoint {
-					remote-endpoint = <&lvds0_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				stdp4028_out: endpoint {
-					remote-endpoint = <&stdp2690_in>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
deleted file mode 100644
index c90b26f00e24..000000000000
--- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ /dev/null
@@ -1,286 +0,0 @@
-/*
- * Copyright 2015 Timesys Corporation.
- * Copyright 2015 General Electric Company
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "imx6q-ba16.dtsi"
-
-/ {
-	clocks {
-		mclk: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <22000000>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
-		status = "okay";
-	};
-
-	reg_wl18xx_vmmc: regulator-wl18xx {
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1807";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pca9539 3 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	reg_wlan: regulator-wlan {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V_wlan";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		gpio = <&gpio6 14 GPIO_ACTIVE_HIGH>;
-	};
-
-	sound {
-		compatible = "fsl,imx6q-ba16-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-ba16-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-};
-
-&ecspi5 {
-	cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi5>;
-	status = "okay";
-
-	m25_eeprom: m25p80@0 {
-		compatible = "atmel,at25";
-		spi-max-frequency = <10000000>;
-		size = <0x8000>;
-		pagesize = <64>;
-		reg = <0>;
-		address-width = <16>;
-	};
-};
-
-&i2c1 {
-	pca9547: mux@70 {
-		compatible = "nxp,pca9547";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mux1_i2c1: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0>;
-
-			ads7830: ads7830@48 {
-				compatible = "ti,ads7830";
-				reg = <0x48>;
-			};
-
-			mma8453: mma8453@1c {
-				compatible = "fsl,mma8453";
-				reg = <0x1c>;
-			};
-		};
-
-		mux1_i2c2: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x1>;
-
-			eeprom: eeprom@50 {
-				compatible = "atmel,24c08";
-				reg = <0x50>;
-			};
-
-			mpl3115: mpl3115@60 {
-				compatible = "fsl,mpl3115";
-				reg = <0x60>;
-			};
-		};
-
-		mux1_i2c3: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x2>;
-		};
-
-		mux1_i2c4: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x3>;
-
-			sgtl5000: codec@0a {
-				compatible = "fsl,sgtl5000";
-				reg = <0x0a>;
-				clocks = <&mclk>;
-				VDDA-supply = <&reg_1p8v>;
-				VDDIO-supply = <&reg_3p3v>;
-			};
-		};
-
-		mux1_i2c5: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x4>;
-
-			pca9539: pca9539@74 {
-				compatible = "nxp,pca9539";
-				reg = <0x74>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				interrupt-parent = <&gpio2>;
-				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-
-				P10 {
-					gpio-hog;
-					gpios = <8 0>;
-					output-low;
-					line-name = "PCA9539-P10";
-				};
-
-				P11 {
-					gpio-hog;
-					gpios = <9 0>;
-					output-low;
-					line-name = "PCA9539-P11";
-				};
-
-				P12 {
-					gpio-hog;
-					gpios = <10 0>;
-					output-low;
-					line-name = "PCA9539-P12";
-				};
-
-				P13 {
-					gpio-hog;
-					gpios = <11 0>;
-					output-low;
-					line-name = "PCA9539-P13";
-				};
-
-				P14 {
-					gpio-hog;
-					gpios = <12 0>;
-					output-low;
-					line-name = "PCA9539-P14";
-				};
-
-				P15 {
-					gpio-hog;
-					gpios = <13 0>;
-					output-low;
-					line-name = "PCA9539-P15";
-				};
-
-				P16 {
-					gpio-hog;
-					gpios = <14 0>;
-					output-low;
-					line-name = "PCA9539-P16";
-				};
-
-				P17 {
-					gpio-hog;
-					gpios = <15 0>;
-					output-low;
-					line-name = "PCA9539-P17";
-				};
-			};
-		};
-
-		mux1_i2c6: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x5>;
-		};
-
-		mux1_i2c7: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x6>;
-		};
-
-		mux1_i2c8: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x7>;
-		};
-	};
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_wl18xx_vmmc>;
-	no-1-8-v;
-	non-removable;
-	wakeup-source;
-	keep-power-in-suspend;
-	cap-power-off-card;
-	max-frequency = <25000000>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1837";
-		reg = <2>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
-		tcxo-clock-frequency = <26000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts b/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts
deleted file mode 100644
index fd0ad9a8866c..000000000000
--- a/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright 2013 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __DTS_V1__
-#define __DTS_V1__
-/dts-v1/;
-#endif
-
-#include "imx6q.dtsi"
-#include "imx6qdl-dfi-fs700-m60.dtsi"
-
-/ {
-	model = "DFI FS700-M60-6QD i.MX6qd Q7 Board";
-	compatible = "dfi,fs700-m60-6qd", "dfi,fs700e-m60", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
deleted file mode 100644
index 33eb7f180995..000000000000
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ /dev/null
@@ -1,486 +0,0 @@
-/*
- * Copyright 2013 Data Modul AG
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6q.dtsi"
-
-/ {
-	model = "Data Modul eDM-QMX6 Board";
-	compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	aliases {
-		gpio7 = &stmpe_gpio1;
-		gpio8 = &stmpe_gpio2;
-		stmpe-i2c0 = &stmpe1;
-		stmpe-i2c1 = &stmpe2;
-	};
-
-	memory {
-		reg = <0x10000000 0x80000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_switch: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_otg_switch";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio7 12 0>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		reg_usb_host1: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_host1_en";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 31 0>;
-			enable-active-high;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		led-blue {
-			label = "blue";
-			gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-green {
-			label = "green";
-			gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pink {
-			label = "pink";
-			gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-red {
-			label = "red";
-			gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&ecspi5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi5>;
-	cs-gpios = <&gpio1 12 0>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		compatible = "m25p80", "jedec,spi-nor";
-		spi-max-frequency = <40000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	phy-supply = <&vgen2_1v2_eth>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2
-		     &pinctrl_stmpe1
-		     &pinctrl_stmpe2
-		     &pinctrl_pfuze>;
-	status = "okay";
-
-	pmic: pfuze100@08 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <20 8>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				regulator-always-on;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_1v2_eth: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vdd_high_in: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	stmpe1: stmpe1601@40 {
-		compatible = "st,stmpe1601";
-		reg = <0x40>;
-		interrupts = <30 0>;
-		interrupt-parent = <&gpio3>;
-		vcc-supply = <&sw2_reg>;
-		vio-supply = <&sw2_reg>;
-
-		stmpe_gpio1: stmpe_gpio {
-			#gpio-cells = <2>;
-			compatible = "st,stmpe-gpio";
-		};
-	};
-
-	stmpe2: stmpe1601@44 {
-		compatible = "st,stmpe1601";
-		reg = <0x44>;
-		interrupts = <2 0>;
-		interrupt-parent = <&gpio5>;
-		vcc-supply = <&sw2_reg>;
-		vio-supply = <&sw2_reg>;
-
-		stmpe_gpio2: stmpe_gpio {
-			#gpio-cells = <2>;
-			compatible = "st,stmpe-gpio";
-		};
-	};
-
-	temp1: ad7414@4c {
-		compatible = "ad,ad7414";
-		reg = <0x4c>;
-	};
-
-	temp2: ad7414@4d {
-		compatible = "ad,ad7414";
-		reg = <0x4d>;
-	};
-
-	rtc: m41t62@68 {
-		compatible = "st,m41t62";
-		reg = <0x68>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-dmo-edmqmx6 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
-				MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-				MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
-			>;
-		};
-
-		pinctrl_ecspi5: ecspi5rp-1 {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO	0x80000000
-				MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI		0x80000000
-				MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK		0x80000000
-				MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x80000000
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x100b1
-			>;
-		};
-
-		pinctrl_pfuze: pfuze100grp1 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x80000000
-			>;
-		};
-
-		pinctrl_stmpe1: stmpe1grp {
-			fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
-		};
-
-		pinctrl_stmpe2: stmpe2grp {
-			fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			>;
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_host1>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	vmmc-supply = <&reg_3p3v>;
-	non-removable;
-	bus-width = <8>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts
deleted file mode 100644
index b715deb4ea46..000000000000
--- a/arch/arm/boot/dts/imx6q-gk802.dts
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Copyright (C) 2013 Philipp Zabel
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6q.dtsi"
-
-/ {
-	model = "Zealz GK802";
-	compatible = "zealz,imx6q-gk802", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		recovery-button {
-			label = "recovery";
-			gpios = <&gpio3 16 1>;
-			linux,code = <0x198>; /* KEY_RESTART */
-			wakeup-source;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-/* Internal I2C */
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	/* SDMC DM2016 1024 bit EEPROM + 128 bit OTP */
-	eeprom: dm2016@51 {
-		compatible = "sdmc,dm2016";
-		reg = <0x51>;
-	};
-};
-
-/* External I2C via HDMI */
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-gk802 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* Recovery button, active-low */
-				MX6QDL_PAD_EIM_D16__GPIO3_IO16  0x100b1
-				/* RTL8192CU enable GPIO, active-low */
-				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-			>;
-		};
-	};
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-/* External USB-A port (USBOTG) */
-&usbotg {
-	disable-over-current;
-	status = "okay";
-};
-
-/* Internal USB port (USBH1), connected to RTL8192CU */
-&usbh1 {
-	disable-over-current;
-	status = "okay";
-};
-
-/* External microSD */
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <4>;
-	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-/* Internal microSD */
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw51xx.dts b/arch/arm/boot/dts/imx6q-gw51xx.dts
deleted file mode 100644
index 8e8bcd8fe0fb..000000000000
--- a/arch/arm/boot/dts/imx6q-gw51xx.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw51xx.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW51XX";
-	compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw52xx.dts b/arch/arm/boot/dts/imx6q-gw52xx.dts
deleted file mode 100644
index a12c47e5ee05..000000000000
--- a/arch/arm/boot/dts/imx6q-gw52xx.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw52xx.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW52XX";
-	compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw53xx.dts b/arch/arm/boot/dts/imx6q-gw53xx.dts
deleted file mode 100644
index d76aaa83dad0..000000000000
--- a/arch/arm/boot/dts/imx6q-gw53xx.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw53xx.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW53XX";
-	compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
deleted file mode 100644
index 9dbeea05a949..000000000000
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ /dev/null
@@ -1,518 +0,0 @@
-/*
- * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6q.dtsi"
-
-/ {
-	model = "Gateworks Ventana GW5400-A";
-	compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
-
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		led0 = &led0;
-		led1 = &led1;
-		led2 = &led2;
-		ssi0 = &ssi1;
-		spi0 = &ecspi1;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		bootargs = "console=ttymxc1,115200";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: user1 {
-			label = "user1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: user2 {
-			label = "user2";
-			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */
-			default-state = "off";
-		};
-
-		led2: user3 {
-			label = "user3";
-			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */
-			default-state = "off";
-		};
-	};
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	pps {
-		compatible = "pps-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-		gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_1p0v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "1P0V";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_h1_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-ventana-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "sgtl5000-audio";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		compatible = "sst,w25q256", "jedec,spi-nor";
-		spi-max-frequency = <30000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	rtc: ds1672@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pmic: pfuze100@08 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	accelerometer: mma8450@1c {
-		compatible = "fsl,mma8450";
-		reg = <0x1c>;
-	};
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&sw4_reg>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	touchscreen: egalax_ts@04 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <12 2>;
-		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&ldb {
-	status = "okay";
-};
-
-&pcie {
-	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx6q-gw5400-a {
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
-				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
-				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
-				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0 /* SPINOR_CS0# */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0 /* user1 led */
-				MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0 /* user2 led */
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0 /* user3 led */
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0 /* PCIE IRQ */
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE RST */
-			>;
-		};
-
-		pinctrl_pps: ppsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b0 /* GPS_PPS */
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-gw54xx.dts b/arch/arm/boot/dts/imx6q-gw54xx.dts
deleted file mode 100644
index 6e8f53e92a2d..000000000000
--- a/arch/arm/boot/dts/imx6q-gw54xx.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw54xx.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW54XX";
-	compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw551x.dts b/arch/arm/boot/dts/imx6q-gw551x.dts
deleted file mode 100644
index 2c7feeef1b0e..000000000000
--- a/arch/arm/boot/dts/imx6q-gw551x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2014 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw551x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW551X";
-	compatible = "gw,imx6q-gw551x", "gw,ventana", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw552x.dts b/arch/arm/boot/dts/imx6q-gw552x.dts
deleted file mode 100644
index f87a8fa6e04d..000000000000
--- a/arch/arm/boot/dts/imx6q-gw552x.dts
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright 2014 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-gw552x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW552X";
-	compatible = "gw,imx6q-gw552x", "gw,ventana", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw553x.dts b/arch/arm/boot/dts/imx6q-gw553x.dts
deleted file mode 100644
index e9c224cea752..000000000000
--- a/arch/arm/boot/dts/imx6q-gw553x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2016 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw553x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW553X";
-	compatible = "gw,imx6q-gw553x", "gw,ventana", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw560x.dts b/arch/arm/boot/dts/imx6q-gw560x.dts
deleted file mode 100644
index 735f2bbf1439..000000000000
--- a/arch/arm/boot/dts/imx6q-gw560x.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw560x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW560X";
-	compatible = "gw,imx6q-gw560x", "gw,ventana", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw5903.dts b/arch/arm/boot/dts/imx6q-gw5903.dts
deleted file mode 100644
index a182e4cb0e6e..000000000000
--- a/arch/arm/boot/dts/imx6q-gw5903.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw5903.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW5903";
-	compatible = "gw,imx6q-gw5903", "gw,ventana", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw5904.dts b/arch/arm/boot/dts/imx6q-gw5904.dts
deleted file mode 100644
index ca1e2ae3341e..000000000000
--- a/arch/arm/boot/dts/imx6q-gw5904.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw5904.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW5904";
-	compatible = "gw,imx6q-gw5904", "gw,ventana", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts
deleted file mode 100644
index 8f9252889971..000000000000
--- a/arch/arm/boot/dts/imx6q-h100.dts
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * Copyright (C) 2015 Lucas Stach <kernel@pengutronix.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-microsom.dtsi"
-#include "imx6qdl-microsom-ar8035.dtsi"
-
-/ {
-	model = "Auvidea H100";
-	compatible = "auvidea,h100", "fsl,imx6q";
-
-	aliases {
-		rtc0 = &rtc;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	hdmi_osc: hdmi-osc {
-		compatible = "fixed-clock";
-		clock-output-names = "hdmi-osc";
-		clock-frequency = <27000000>;
-		#clock-cells = <0>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_leds>;
-
-		led0: power {
-			label = "power";
-			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		led1: stream {
-			label = "stream";
-			gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led2: rec {
-			label = "rec";
-			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_hdmi: regulator-hdmi {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_reg_hdmi>;
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-		regulator-name = "V_HDMI";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_nvcc_sd2: regulator-nvcc-sd2 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_reg_nvcc_sd2>;
-		compatible = "regulator-gpio";
-		regulator-name = "NVCC_SD2";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-type = "voltage";
-		regulator-boot-on;
-		regulator-always-on;
-		gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x1
-			  3300000 0x0>;
-	};
-
-	reg_usbh1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_usbh1_vbus>;
-		regulator-name = "USB_H1_VBUS";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usbotg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_usbotg_vbus>;
-		regulator-name = "USB_OTG_VBUS";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	sound-sgtl5000 {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "H100 on-board codec";
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-ext-port = <5>;
-		mux-int-port = <1>;
-		ssi-controller = <&ssi1>;
-	};
-};
-
-&audmux {
-	status = "okay";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_hdmi>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_i2c1>;
-	status = "okay";
-
-	eeprom: 24c02@51 {
-		compatible = "microchip,24c02", "at24";
-		reg = <0x51>;
-	};
-
-	rtc: pcf8523@68 {
-		compatible = "nxp,pcf8523";
-		reg = <0x68>;
-	};
-
-	sgtl5000: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_sgtl5000>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	tc358743: tc358743@0f {
-		compatible = "toshiba,tc358743";
-		reg = <0x0f>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_tc358743>;
-		clocks = <&hdmi_osc>;
-		clock-names = "refclk";
-		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
-		/* IRQ has a wrong pull resistor which renders it useless  */
-
-		port@0 {
-			tc358743_out: endpoint {
-				remote-endpoint = <&mipi_csi2_in>;
-				data-lanes = <1 2 3 4>;
-				clock-lanes = <0>;
-				clock-noncontinuous;
-				link-frequencies = /bits/ 64 <297000000>;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_i2c2>;
-	status = "okay";
-};
-
-&iomuxc {
-	h100 {
-		pinctrl_h100_hdmi: h100-hdmi {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
-			>;
-		};
-
-		pinctrl_h100_i2c1: h100-i2c1 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_h100_i2c2: h100-i2c2 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_h100_leds: pinctrl-h100-leds {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b0
-				MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
-				MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_reg_hdmi: h100-reg-hdmi {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_reg_nvcc_sd2: h100-reg-nvcc-sd2 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_sgtl5000: h100-sgtl5000 {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
-				MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0
-				MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x110b0
-				MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0
-				MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
-			>;
-		};
-
-		pinctrl_h100_tc358743: h100-tc358743 {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_uart2: h100-uart2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_h100_usbh1_vbus: hummingboard-usbh1-vbus {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_usbotg_id: hummingboard-usbotg-id {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
-			>;
-		};
-
-		pinctrl_h100_usbotg_vbus: hummingboard-usbotg-vbus {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_usdhc2: h100-usdhc2 {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x13059
-			>;
-		};
-
-		pinctrl_h100_usdhc2_100mhz: h100-usdhc2-100mhz {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
-			>;
-		};
-
-		pinctrl_h100_usdhc2_200mhz: h100-usdhc2-200mhz {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
-			>;
-		};
-	};
-};
-
-&mipi_csi {
-	status = "okay";
-
-	port@0 {
-		mipi_csi2_in: endpoint {
-			remote-endpoint = <&tc358743_out>;
-			data-lanes = <1 2 3 4>;
-			clock-lanes = <0>;
-			clock-noncontinuous;
-			link-frequencies = /bits/ 64 <297000000>;
-		};
-	};
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	disable-over-current;
-	vbus-supply = <&reg_usbh1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	disable-over-current;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_usbotg_id>;
-	vbus-supply = <&reg_usbotg_vbus>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_h100_usdhc2>;
-	pinctrl-1 = <&pinctrl_h100_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_h100_usdhc2_200mhz>;
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_nvcc_sd2>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
deleted file mode 100644
index 49b60ca20e6d..000000000000
--- a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-icore.dtsi"
-
-/ {
-	model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 10.1 Kit";
-	compatible = "engicam,imx6-icore", "fsl,imx6q";
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <24>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <60000000>;
-				hactive = <1280>;
-				vactive = <800>;
-				hback-porch = <40>;
-				hfront-porch = <40>;
-				vback-porch = <10>;
-				vfront-porch = <3>;
-				hsync-len = <80>;
-				vsync-len = <10>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
deleted file mode 100644
index 9e230f56c5fb..000000000000
--- a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-icore.dtsi"
-
-/ {
-	model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 12 Kit";
-	compatible = "engicam,imx6-icore", "fsl,imx6q";
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <46800000>;
-				hactive = <1280>;
-				vactive = <480>;
-				hback-porch = <353>;
-				hfront-porch = <47>;
-				vback-porch = <39>;
-				vfront-porch = <4>;
-				hsync-len = <8>;
-				vsync-len = <2>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-icore-rqs.dts b/arch/arm/boot/dts/imx6q-icore-rqs.dts
deleted file mode 100644
index e451b4ceb4d8..000000000000
--- a/arch/arm/boot/dts/imx6q-icore-rqs.dts
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright (C) 2015 Amarula Solutions B.V.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-icore-rqs.dtsi"
-
-/ {
-	model = "Engicam i.CoreM6 Quad/Dual RQS Starter Kit";
-	compatible = "engicam,imx6-icore-rqs", "fsl,imx6q";
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx-audio-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-};
-
-&i2c3 {
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-		VDDD-supply = <&reg_1p8v>;
-	};
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/imx6q-icore.dts
deleted file mode 100644
index 5613dd9dc469..000000000000
--- a/arch/arm/boot/dts/imx6q-icore.dts
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-icore.dtsi"
-
-/ {
-	model = "Engicam i.CoreM6 Quad/Dual Starter Kit";
-	compatible = "engicam,imx6-icore", "fsl,imx6q";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "okay";
-};
-
-&i2c1 {
-	max11801: touchscreen@48 {
-		compatible = "maxim,max11801";
-		reg = <0x48>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <60000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <30>;
-				hfront-porch = <30>;
-				vback-porch = <5>;
-				vfront-porch = <5>;
-				hsync-len = <64>;
-				vsync-len = <20>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts
deleted file mode 100644
index 2a3c44f98eed..000000000000
--- a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright 2015 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-nitrogen6_max.dtsi"
-
-/ {
-	model = "Boundary Devices i.MX6 Quad Nitrogen6_MAX Board";
-	compatible = "boundary,imx6q-nitrogen6_max", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
deleted file mode 100644
index c5d59baa1a07..000000000000
--- a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright 2016 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-nitrogen6_som2.dtsi"
-
-/ {
-	model = "Boundary Devices i.MX6 Quad Nitrogen6_SOM2 Board";
-	compatible = "boundary,imx6q-nitrogen6_som2", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts
deleted file mode 100644
index df8ff397a914..000000000000
--- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2013 Boundary Devices, Inc.
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-nitrogen6x.dtsi"
-
-/ {
-	model = "Boundary Devices i.MX6 Quad Nitrogen6x Board";
-	compatible = "boundary,imx6q-nitrogen6x", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
deleted file mode 100644
index 1f4771304da8..000000000000
--- a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx6q-phytec-pfla02.dtsi"
-#include "imx6qdl-phytec-pbab01.dtsi"
-
-/ {
-	model = "Phytec phyFLEX-i.MX6 Quad Carrier-Board";
-	compatible = "phytec,imx6q-pbab01", "phytec,imx6q-pfla02", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart4;
-	};
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
deleted file mode 100644
index cd20d0a948de..000000000000
--- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "imx6q.dtsi"
-#include "imx6qdl-phytec-pfla02.dtsi"
-
-/ {
-	model = "Phytec phyFLEX-i.MX6 Quad";
-	compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
-
-	memory {
-		reg = <0x10000000 0x80000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/imx6q-rex-pro.dts
deleted file mode 100644
index 90ea61ae04e9..000000000000
--- a/arch/arm/boot/dts/imx6q-rex-pro.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright 2014 FEDEVEL, Inc.
- *
- * Author: Robert Nelson <robertcnelson@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-rex.dtsi"
-
-/ {
-	model = "Rex Pro i.MX6 Quad Board";
-	compatible = "rex,imx6q-rex-pro", "fsl,imx6q";
-
-	memory {
-		reg = <0x10000000 0x80000000>;
-	};
-};
-
-&ecspi3 {
-	flash: m25p80@0 {
-		compatible = "sst,sst25vf032b", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts
deleted file mode 100644
index 334b9247e78c..000000000000
--- a/arch/arm/boot/dts/imx6q-sabreauto.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-sabreauto.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad SABRE Automotive Board";
-	compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
deleted file mode 100644
index dc51262e7b2f..000000000000
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-sabrelite.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad SABRE Lite Board";
-	compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
-
-&ipu1_csi1_from_mipi_vc1 {
-	clock-lanes = <0>;
-	data-lanes = <1 2>;
-};
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
deleted file mode 100644
index 527772b62fee..000000000000
--- a/arch/arm/boot/dts/imx6q-sabresd.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-sabresd.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad SABRE Smart Device Board";
-	compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
-
-&ipu1_csi1_from_mipi_vc1 {
-	clock-lanes = <0>;
-	data-lanes = <1 2>;
-};
diff --git a/arch/arm/boot/dts/imx6q-sbc6x.dts b/arch/arm/boot/dts/imx6q-sbc6x.dts
deleted file mode 100644
index 255733063ea4..000000000000
--- a/arch/arm/boot/dts/imx6q-sbc6x.dts
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright 2013 Pavel Machek <pavel@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License V2.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-
-/ {
-	model = "MicroSys sbc6x board";
-	compatible = "microsys,sbc6x", "fsl,imx6q";
-
-	memory {
-		reg = <0x10000000 0x80000000>;
-	};
-};
-
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	status = "okay";
-};
-
-&iomuxc {
-	imx6q-sbc6x {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
deleted file mode 100644
index 71746edc2ee9..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-
-	aliases {
-		display = &display;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 0>;
-		power-supply = <&reg_3v3>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	display: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0_1>;
-		status = "okay";
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		display-timings {
-			native-mode = <&ET070001DM6>;
-
-			ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&can1 {
-	status = "disabled";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&kpp {
-	status = "disabled";
-};
-
-&reg_can_xcvr {
-	status = "disabled";
-};
-
-&touchscreen {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
deleted file mode 100644
index f9cd21a41a79..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1010.dts
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1010 Module";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-
-	aliases {
-		display = &display;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		power-supply = <&reg_3v3>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	display: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0_1>;
-		status = "okay";
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		display-timings {
-			VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hsync-len = <96>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vsync-len = <2>;
-				vfront-porch = <12>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETV570 {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0350 {
-				clock-frequency = <6413760>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <34>;
-				hsync-len = <34>;
-				hfront-porch = <20>;
-				vback-porch = <15>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0430 {
-				clock-frequency = <9009000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <2>;
-				hsync-len = <41>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vsync-len = <10>;
-				vfront-porch = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0500 {
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0700 { /* same as ET0500 */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETQ570 {
-				clock-frequency = <6596040>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <38>;
-				hsync-len = <30>;
-				hfront-porch = <30>;
-				vback-porch = <16>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
deleted file mode 100644
index 959ff3fb7304..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1020 Module on CoMpact TFT";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-
-	aliases {
-		display = &display;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 0>;
-		power-supply = <&reg_3v3>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	display: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0_1>;
-		status = "okay";
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		display-timings {
-			native-mode = <&ET070001DM6>;
-
-			ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&can1 {
-	status = "disabled";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&kpp {
-	status = "disabled";
-};
-
-&reg_can_xcvr {
-	status = "disabled";
-};
-
-&touchscreen {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/imx6q-tx6q-1020.dts
deleted file mode 100644
index b49133d25d80..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1020.dts
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1020 Module";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-
-	aliases {
-		display = &display;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		power-supply = <&reg_3v3>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	display: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0_1>;
-		status = "okay";
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		display-timings {
-			VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hsync-len = <96>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vsync-len = <2>;
-				vfront-porch = <12>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETV570 {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0350 {
-				clock-frequency = <6413760>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <34>;
-				hsync-len = <34>;
-				hfront-porch = <20>;
-				vback-porch = <15>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0430 {
-				clock-frequency = <9009000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <2>;
-				hsync-len = <41>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vsync-len = <10>;
-				vfront-porch = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0500 {
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0700 { /* same as ET0500 */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETQ570 {
-				clock-frequency = <6596040>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <38>;
-				hsync-len = <30>;
-				hfront-porch = <30>;
-				vback-porch = <16>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036.dts b/arch/arm/boot/dts/imx6q-tx6q-1036.dts
deleted file mode 100644
index 7c152e32758c..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1036.dts
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1036 Module";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-
-	aliases {
-		display = &display;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd0_pwr>;
-		enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-		power-supply = <&reg_lcd1_pwr>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	display: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0_2>;
-		interface-pix-fmt = "rgb24";
-		status = "okay";
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		display-timings {
-			native-mode = <&vga>;
-
-			vga: VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hsync-len = <96>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vsync-len = <2>;
-				vfront-porch = <12>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETV570 {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0350 {
-				clock-frequency = <6413760>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <34>;
-				hsync-len = <34>;
-				hfront-porch = <20>;
-				vback-porch = <15>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0430 {
-				clock-frequency = <9009000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <2>;
-				hsync-len = <41>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vsync-len = <10>;
-				vfront-porch = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0500 {
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0700 { /* same as ET0500 */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETQ570 {
-				clock-frequency = <6596040>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <38>;
-				hsync-len = <30>;
-				hfront-porch = <30>;
-				vback-porch = <16>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&ipu2 {
-	status = "disabled";
-};
-
-&reg_lcd0_pwr {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
deleted file mode 100644
index 0433e220a931..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1110 Module";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-
-	aliases {
-		display = &lvds0;
-		lvds0 = &lvds0;
-		lvds1 = &lvds1;
-	};
-
-	backlight0: backlight0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 0>;
-		power-supply = <&reg_lcd0_pwr>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	backlight1: backlight1 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 500000 0>;
-		power-supply = <&reg_lcd1_pwr>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-};
-
-&i2c3 {
-	polytouch1: eeti@04 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_eeti>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <22 0>;
-		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		wakeup-source;
-	};
-};
-
-&kpp {
-	status = "disabled"; /* pad conflict with backlight1 PWM */
-};
-
-&ldb {
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&lvds_timing0>;
-			lvds_timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-
-	lvds1: lvds-channel@1 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "disabled";
-
-		display-timings {
-			native-mode = <&lvds_timing1>;
-			lvds_timing1: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_eeti: eetigrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
deleted file mode 100644
index d78b129d01ea..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * Copyright 2016 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1110/-1130 Module on MB7 baseboard";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-
-	aliases {
-		display = &lvds0;
-		ipu1 = &ipu2;
-		lvds0 = &lvds0;
-		lvds1 = &lvds1;
-	};
-
-	backlight0: backlight0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		power-supply = <&reg_lcd0_pwr>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	backlight1: backlight1 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
-		power-supply = <&reg_lcd1_pwr>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-};
-
-&can1 {
-	status = "disabled";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&i2c3 {
-	polytouch1: eeti@04 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_eeti>;
-		interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		wakeup-source;
-	};
-};
-
-&ipu2 {
-	status = "disabled";
-};
-
-&kpp {
-	status = "disabled"; /* pads partially clash with backlight1 PWM */
-};
-
-&ldb {
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&lvds0_timing1>;
-
-			lvds0_timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			lvds0_timing1: VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vfront-porch = <12>;
-				hsync-len = <96>;
-				vsync-len = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			lvds0_timing2: nl12880bc20 {
-				clock-frequency = <71000000>;
-				hactive = <1280>;
-				vactive = <800>;
-				hback-porch = <50>;
-				hfront-porch = <50>;
-				vback-porch = <5>;
-				vfront-porch = <5>;
-				hsync-len = <60>;
-				vsync-len = <13>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-
-	lvds1: lvds-channel@1 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&lvds1_timing2>;
-
-			lvds1_timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			lvds1_timing1: VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vfront-porch = <12>;
-				hsync-len = <96>;
-				vsync-len = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			lvds1_timing2: nl12880bc20 {
-				clock-frequency = <71000000>;
-				hactive = <1280>;
-				vactive = <800>;
-				hback-porch = <50>;
-				hfront-porch = <50>;
-				vback-porch = <5>;
-				vfront-porch = <5>;
-				hsync-len = <60>;
-				vsync-len = <13>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_eeti: eetigrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts
deleted file mode 100644
index c3e64ff3d544..000000000000
--- a/arch/arm/boot/dts/imx6q-udoo.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-udoo.dtsi"
-
-/ {
-	model = "Udoo i.MX6 Quad Board";
-	compatible = "udoo,imx6q-udoo", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
deleted file mode 100644
index 9207d80f9cfb..000000000000
--- a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-wandboard-revb1.dtsi"
-
-/ {
-	model = "Wandboard i.MX6 Quad Board rev B1";
-	compatible = "wand,imx6q-wandboard", "fsl,imx6q";
-
-	memory {
-		reg = <0x10000000 0x80000000>;
-	};
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-wandboard.dts b/arch/arm/boot/dts/imx6q-wandboard.dts
deleted file mode 100644
index 4a8a6ee13e9f..000000000000
--- a/arch/arm/boot/dts/imx6q-wandboard.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-wandboard-revc1.dtsi"
-
-/ {
-	model = "Wandboard i.MX6 Quad Board";
-	compatible = "wand,imx6q-wandboard", "fsl,imx6q";
-
-	memory {
-		reg = <0x10000000 0x80000000>;
-	};
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-zii-rdu2.dts b/arch/arm/boot/dts/imx6q-zii-rdu2.dts
deleted file mode 100644
index 6be8a1eea895..000000000000
--- a/arch/arm/boot/dts/imx6q-zii-rdu2.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright (C) 2016-2017 Zodiac Inflight Innovations
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-zii-rdu2.dtsi"
-
-/ {
-	model = "ZII RDU2 Board";
-	compatible = "zii,imx6q-zii-rdu2", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
deleted file mode 100644
index 90a741732f60..000000000000
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ /dev/null
@@ -1,462 +0,0 @@
-
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6q-pinfunc.h"
-#include "imx6qdl.dtsi"
-
-/ {
-	aliases {
-		ipu1 = &ipu2;
-		spi4 = &ecspi5;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			operating-points = <
-				/* kHz    uV */
-				1200000 1275000
-				996000  1250000
-				852000  1250000
-				792000  1175000
-				396000  975000
-			>;
-			fsl,soc-operating-points = <
-				/* ARM kHz  SOC-PU uV */
-				1200000 1275000
-				996000	1250000
-				852000	1250000
-				792000	1175000
-				396000	1175000
-			>;
-			clock-latency = <61036>; /* two CLK32 periods */
-			clocks = <&clks IMX6QDL_CLK_ARM>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
-				 <&clks IMX6QDL_CLK_STEP>,
-				 <&clks IMX6QDL_CLK_PLL1_SW>,
-				 <&clks IMX6QDL_CLK_PLL1_SYS>;
-			clock-names = "arm", "pll2_pfd2_396m", "step",
-				      "pll1_sw", "pll1_sys";
-			arm-supply = <&reg_arm>;
-			pu-supply = <&reg_pu>;
-			soc-supply = <&reg_soc>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@2 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <2>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@3 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <3>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	soc {
-		ocram: sram@00900000 {
-			compatible = "mmio-sram";
-			reg = <0x00900000 0x40000>;
-			clocks = <&clks IMX6QDL_CLK_OCRAM>;
-		};
-
-		aips-bus@02000000 { /* AIPS1 */
-			spba-bus@02000000 {
-				ecspi5: ecspi@02018000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02018000 0x4000>;
-					interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6Q_CLK_ECSPI5>,
-						 <&clks IMX6Q_CLK_ECSPI5>;
-					clock-names = "ipg", "per";
-					dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-			};
-
-			iomuxc: iomuxc@020e0000 {
-				compatible = "fsl,imx6q-iomuxc";
-			};
-		};
-
-		sata: sata@02200000 {
-			compatible = "fsl,imx6q-ahci";
-			reg = <0x02200000 0x4000>;
-			interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks IMX6QDL_CLK_SATA>,
-				 <&clks IMX6QDL_CLK_SATA_REF_100M>,
-				 <&clks IMX6QDL_CLK_AHB>;
-			clock-names = "sata", "sata_ref", "ahb";
-			status = "disabled";
-		};
-
-		gpu_vg: gpu@02204000 {
-			compatible = "vivante,gc";
-			reg = <0x02204000 0x4000>;
-			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks IMX6QDL_CLK_OPENVG_AXI>,
-				 <&clks IMX6QDL_CLK_GPU2D_CORE>;
-			clock-names = "bus", "core";
-			power-domains = <&pd_pu>;
-		};
-
-		ipu2: ipu@02800000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,imx6q-ipu";
-			reg = <0x02800000 0x400000>;
-			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks IMX6QDL_CLK_IPU2>,
-				 <&clks IMX6QDL_CLK_IPU2_DI0>,
-				 <&clks IMX6QDL_CLK_IPU2_DI1>;
-			clock-names = "bus", "di0", "di1";
-			resets = <&src 4>;
-
-			ipu2_csi0: port@0 {
-				reg = <0>;
-
-				ipu2_csi0_from_mipi_vc2: endpoint {
-					remote-endpoint = <&mipi_vc2_to_ipu2_csi0>;
-				};
-			};
-
-			ipu2_csi1: port@1 {
-				reg = <1>;
-
-				ipu2_csi1_from_ipu2_csi1_mux: endpoint {
-					remote-endpoint = <&ipu2_csi1_mux_to_ipu2_csi1>;
-				};
-			};
-
-			ipu2_di0: port@2 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <2>;
-
-				ipu2_di0_disp0: disp0-endpoint {
-				};
-
-				ipu2_di0_hdmi: hdmi-endpoint {
-					remote-endpoint = <&hdmi_mux_2>;
-				};
-
-				ipu2_di0_mipi: mipi-endpoint {
-					remote-endpoint = <&mipi_mux_2>;
-				};
-
-				ipu2_di0_lvds0: lvds0-endpoint {
-					remote-endpoint = <&lvds0_mux_2>;
-				};
-
-				ipu2_di0_lvds1: lvds1-endpoint {
-					remote-endpoint = <&lvds1_mux_2>;
-				};
-			};
-
-			ipu2_di1: port@3 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <3>;
-
-				ipu2_di1_hdmi: hdmi-endpoint {
-					remote-endpoint = <&hdmi_mux_3>;
-				};
-
-				ipu2_di1_mipi: mipi-endpoint {
-					remote-endpoint = <&mipi_mux_3>;
-				};
-
-				ipu2_di1_lvds0: lvds0-endpoint {
-					remote-endpoint = <&lvds0_mux_3>;
-				};
-
-				ipu2_di1_lvds1: lvds1-endpoint {
-					remote-endpoint = <&lvds1_mux_3>;
-				};
-			};
-		};
-	};
-
-	capture-subsystem {
-		compatible = "fsl,imx-capture-subsystem";
-		ports = <&ipu1_csi0>, <&ipu1_csi1>, <&ipu2_csi0>, <&ipu2_csi1>;
-	};
-
-	display-subsystem {
-		compatible = "fsl,imx-display-subsystem";
-		ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>;
-	};
-
-	gpu-subsystem {
-		compatible = "fsl,imx-gpu-subsystem";
-		cores = <&gpu_2d>, <&gpu_3d>, <&gpu_vg>;
-	};
-};
-
-&gpio1 {
-	gpio-ranges = <&iomuxc  0 136  2>, <&iomuxc  2 141 1>, <&iomuxc  3 139 1>,
-		      <&iomuxc  4 142  2>, <&iomuxc  6 140 1>, <&iomuxc  7 144 2>,
-		      <&iomuxc  9 138  1>, <&iomuxc 10 213 3>, <&iomuxc 13  20 1>,
-		      <&iomuxc 14  19  1>, <&iomuxc 15  21 1>, <&iomuxc 16 208 1>,
-		      <&iomuxc 17 207  1>, <&iomuxc 18 210 3>, <&iomuxc 21 209 1>,
-		      <&iomuxc 22 116 10>;
-};
-
-&gpio2 {
-	gpio-ranges = <&iomuxc  0 191 16>, <&iomuxc 16 55 14>, <&iomuxc 30 35 1>,
-		      <&iomuxc 31  44  1>;
-};
-
-&gpio3 {
-	gpio-ranges = <&iomuxc 0 69 16>, <&iomuxc 16 36 8>, <&iomuxc 24 45 8>;
-};
-
-&gpio4 {
-	gpio-ranges = <&iomuxc 5 149 1>, <&iomuxc 6 126 10>, <&iomuxc 16 87 16>;
-};
-
-&gpio5 {
-	gpio-ranges = <&iomuxc 0  85  1>, <&iomuxc  2  34  1>, <&iomuxc 4 53 1>,
-		      <&iomuxc 5 103 13>, <&iomuxc 18 150 14>;
-};
-
-&gpio6 {
-	gpio-ranges = <&iomuxc  0 164 6>, <&iomuxc  6  54 1>, <&iomuxc  7 181  5>,
-		      <&iomuxc 14 186 3>, <&iomuxc 17 170 2>, <&iomuxc 19  22 12>,
-		      <&iomuxc 31  86 1>;
-};
-
-&gpio7 {
-	gpio-ranges = <&iomuxc 0 172 9>, <&iomuxc 9 189 2>, <&iomuxc 11 146 3>;
-};
-
-&gpr {
-	ipu1_csi0_mux {
-		compatible = "video-mux";
-		mux-controls = <&mux 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			ipu1_csi0_mux_from_mipi_vc0: endpoint {
-				remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			ipu1_csi0_mux_from_parallel_sensor: endpoint {
-			};
-		};
-
-		port@2 {
-			reg = <2>;
-
-			ipu1_csi0_mux_to_ipu1_csi0: endpoint {
-				remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>;
-			};
-		};
-	};
-
-	ipu2_csi1_mux {
-		compatible = "video-mux";
-		mux-controls = <&mux 1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			ipu2_csi1_mux_from_mipi_vc3: endpoint {
-				remote-endpoint = <&mipi_vc3_to_ipu2_csi1_mux>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			ipu2_csi1_mux_from_parallel_sensor: endpoint {
-			};
-		};
-
-		port@2 {
-			reg = <2>;
-
-			ipu2_csi1_mux_to_ipu2_csi1: endpoint {
-				remote-endpoint = <&ipu2_csi1_from_ipu2_csi1_mux>;
-			};
-		};
-	};
-};
-
-&hdmi {
-	compatible = "fsl,imx6q-hdmi";
-
-	port@2 {
-		reg = <2>;
-
-		hdmi_mux_2: endpoint {
-			remote-endpoint = <&ipu2_di0_hdmi>;
-		};
-	};
-
-	port@3 {
-		reg = <3>;
-
-		hdmi_mux_3: endpoint {
-			remote-endpoint = <&ipu2_di1_hdmi>;
-		};
-	};
-};
-
-&ipu1_csi1 {
-	ipu1_csi1_from_mipi_vc1: endpoint {
-		remote-endpoint = <&mipi_vc1_to_ipu1_csi1>;
-	};
-};
-
-&ldb {
-	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
-		 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
-		 <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
-		 <&clks IMX6QDL_CLK_LDB_DI0>, <&clks IMX6QDL_CLK_LDB_DI1>;
-	clock-names = "di0_pll", "di1_pll",
-		      "di0_sel", "di1_sel", "di2_sel", "di3_sel",
-		      "di0", "di1";
-
-	lvds-channel@0 {
-		port@2 {
-			reg = <2>;
-
-			lvds0_mux_2: endpoint {
-				remote-endpoint = <&ipu2_di0_lvds0>;
-			};
-		};
-
-		port@3 {
-			reg = <3>;
-
-			lvds0_mux_3: endpoint {
-				remote-endpoint = <&ipu2_di1_lvds0>;
-			};
-		};
-	};
-
-	lvds-channel@1 {
-		port@2 {
-			reg = <2>;
-
-			lvds1_mux_2: endpoint {
-				remote-endpoint = <&ipu2_di0_lvds1>;
-			};
-		};
-
-		port@3 {
-			reg = <3>;
-
-			lvds1_mux_3: endpoint {
-				remote-endpoint = <&ipu2_di1_lvds1>;
-			};
-		};
-	};
-};
-
-&mipi_csi {
-	port@1 {
-		reg = <1>;
-
-		mipi_vc0_to_ipu1_csi0_mux: endpoint {
-			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
-		};
-	};
-
-	port@2 {
-		reg = <2>;
-
-		mipi_vc1_to_ipu1_csi1: endpoint {
-			remote-endpoint = <&ipu1_csi1_from_mipi_vc1>;
-		};
-	};
-
-	port@3 {
-		reg = <3>;
-
-		mipi_vc2_to_ipu2_csi0: endpoint {
-			remote-endpoint = <&ipu2_csi0_from_mipi_vc2>;
-		};
-	};
-
-	port@4 {
-		reg = <4>;
-
-		mipi_vc3_to_ipu2_csi1_mux: endpoint {
-			remote-endpoint = <&ipu2_csi1_mux_from_mipi_vc3>;
-		};
-	};
-};
-
-&mipi_dsi {
-	ports {
-		port@2 {
-			reg = <2>;
-
-			mipi_mux_2: endpoint {
-				remote-endpoint = <&ipu2_di0_mipi>;
-			};
-		};
-
-		port@3 {
-			reg = <3>;
-
-			mipi_mux_3: endpoint {
-				remote-endpoint = <&ipu2_di1_mipi>;
-			};
-		};
-	};
-};
-
-&mux {
-	mux-reg-masks = <0x04 0x00080000>, /* MIPI_IPU1_MUX */
-			<0x04 0x00100000>, /* MIPI_IPU2_MUX */
-			<0x0c 0x0000000c>, /* HDMI_MUX_CTL */
-			<0x0c 0x000000c0>, /* LVDS0_MUX_CTL */
-			<0x0c 0x00000300>, /* LVDS1_MUX_CTL */
-			<0x28 0x00000003>, /* DCIC1_MUX_CTL */
-			<0x28 0x0000000c>; /* DCIC2_MUX_CTL */
-};
-
-&vpu {
-	compatible = "fsl,imx6q-vpu", "cnm,coda960";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
deleted file mode 100644
index ba01dd76d887..000000000000
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ /dev/null
@@ -1,991 +0,0 @@
-/*
- * Copyright 2014-2016 Toradex AG
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Toradex Apalis iMX6Q/D Module";
-	compatible = "toradex,apalis_imx6q", "fsl,imx6q";
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-		pwms = <&pwm4 0 5000000>;
-		enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
-		status = "disabled";
-	};
-
-	/* DDC_I2C: I2C2_SDA/SCL on MXM3 205/207 */
-	i2cddc: i2c@0 {
-		compatible = "i2c-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c_ddc>;
-		gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */
-			 &gpio2 30 GPIO_ACTIVE_HIGH /* scl */
-			>;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		status = "disabled";
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>;
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		status = "disabled";
-	};
-
-	/* on module USB hub */
-	reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>;
-		regulator-name = "usb_host_vbus_hub";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <2000>;
-		enable-active-high;
-		status = "okay";
-	};
-
-	reg_usb_host_vbus: regulator-usb-host-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
-		regulator-name = "usb_host_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio =  <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&reg_usb_host_vbus_hub>;
-		status = "disabled";
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx6q-apalis-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"LINE_IN", "Line In Jack",
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-
-	sound_spdif: sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-in;
-		spdif-out;
-		status = "disabled";
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "disabled";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "disabled";
-};
-
-/* Apalis SPI1 */
-&ecspi1 {
-	cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "disabled";
-};
-
-/* Apalis SPI2 */
-&ecspi2 {
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "disabled";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy>;
-	phy-reset-duration = <10>;
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy@7 {
-			interrupt-parent = <&gpio1>;
-			interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
-			reg = <7>;
-		};
-	};
-};
-
-/*
- * GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier
- * board)
- */
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "disabled";
-};
-
-/*
- * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
- * touch screen controller
- */
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pmic: pfuze100@08 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	/* STMPE811 touch screen controller */
-	stmpe811@41 {
-		compatible = "st,stmpe811";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touch_int>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x41>;
-		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-parent = <&gpio4>;
-		interrupt-controller;
-		id = <0>;
-		blocks = <0x5>;
-		irq-trigger = <0x1>;
-
-		stmpe_touchscreen {
-			compatible = "st,stmpe-ts";
-			reg = <0>;
-			/* 3.25 MHz ADC clock speed */
-			st,adc-freq = <1>;
-			/* 8 sample average control */
-			st,ave-ctrl = <3>;
-			/* 7 length fractional part in z */
-			st,fraction-z = <7>;
-			/*
-			 * 50 mA typical 80 mA max touchscreen drivers
-			 * current limit value
-			 */
-			st,i-drive = <1>;
-			/* 12-bit ADC */
-			st,mod-12b = <1>;
-			/* internal ADC reference */
-			st,ref-sel = <0>;
-			/* ADC converstion time: 80 clocks */
-			st,sample-time = <4>;
-			/* 1 ms panel driver settling time */
-			st,settling = <3>;
-			/* 5 ms touch detect interrupt delay */
-			st,touch-det-delay = <5>;
-		};
-	};
-};
-
-/*
- * GEN2_I2C, CAM: I2C3_SDA/SCL on MXM3 201/203 (unused)
- */
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "recovery";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_recovery>;
-	scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
-	status = "disabled";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "disabled";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "disabled";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "disabled";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	status = "disabled";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
-	fsl,dte-mode;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_dte>;
-	fsl,dte-mode;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4_dte>;
-	fsl,dte-mode;
-	status = "disabled";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5_dte>;
-	fsl,dte-mode;
-	status = "disabled";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "disabled";
-};
-
-/* MMC1 */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	vqmmc-supply = <&reg_3p3v>;
-	bus-width = <8>;
-	voltage-ranges = <3300 3300>;
-	status = "disabled";
-};
-
-/* SD1 */
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	vqmmc-supply = <&reg_3p3v>;
-	bus-width = <4>;
-	voltage-ranges = <3300 3300>;
-	status = "disabled";
-};
-
-/* eMMC */
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	vqmmc-supply = <&reg_3p3v>;
-	bus-width = <8>;
-	voltage-ranges = <3300 3300>;
-	non-removable;
-	status = "okay";
-};
-
-&weim {
-	status = "disabled";
-};
-
-&iomuxc {
-	/* pins used on module */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_reset_moci>;
-
-	pinctrl_apalis_gpio1: gpio2io04grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio2: gpio2io05grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio3: gpio2io06grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio4: gpio2io07grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio5: gpio6io10grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio6: gpio6io09grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio7: gpio1io02grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio8: gpio1io06grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0
-		>;
-	};
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC	0x130b0
-			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x130b0
-			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
-			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
-		>;
-	};
-
-	pinctrl_cam_mclk: cammclkgrp {
-		fsl,pins = <
-			/* CAM sys_mclk */
-			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x100b1
-			MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x100b1
-			MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x100b1
-			/* SPI1 cs */
-			MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000b1
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
-			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
-			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
-			/* SPI2 cs */
-			MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			/* Ethernet PHY reset */
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
-			/* Ethernet PHY interrupt */
-			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x000b1
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
-			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio_bl_on: gpioblon {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio_keys: gpio1io04grp {
-		fsl,pins = <
-			/* Power button */
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
-		>;
-	};
-
-	pinctrl_hdmi_cec: hdmicecgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
-		>;
-	};
-
-	pinctrl_i2c_ddc: gpioi2cddcgrp {
-		fsl,pins = <
-			/* DDC bitbang */
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
-			MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
-			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3_recovery: i2c3recoverygrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1
-			MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1
-		>;
-	};
-
-	pinctrl_ipu1_csi0: ipu1csi0grp { /* parallel camera */
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0xb0b1
-			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0xb0b1
-			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0xb0b1
-			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0xb0b1
-			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0xb0b1
-			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0xb0b1
-			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0xb0b1
-			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0xb0b1
-			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1
-			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0xb0b1
-			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0xb0b1
-		>;
-	};
-
-	pinctrl_ipu1_lcdif: ipu1lcdifgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK	0x61
-			/* DE */
-			MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15	0x61
-			/* HSync */
-			MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02	0x61
-			/* VSync */
-			MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03	0x61
-			MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00	0x61
-			MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01	0x61
-			MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02	0x61
-			MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03	0x61
-			MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04	0x61
-			MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05	0x61
-			MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06	0x61
-			MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07	0x61
-			MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08	0x61
-			MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09	0x61
-			MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10	0x61
-			MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11	0x61
-			MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12	0x61
-			MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13	0x61
-			MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14	0x61
-			MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15	0x61
-			MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16	0x61
-			MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17	0x61
-			MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18	0x61
-			MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19	0x61
-			MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20	0x61
-			MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21	0x61
-			MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22	0x61
-			MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23	0x61
-		>;
-	};
-
-	pinctrl_ipu2_vdac: ipu2vdacgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0xd1
-			MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15       0xd1
-			MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02        0xd1
-			MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03        0xd1
-			MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00   0xf9
-			MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01   0xf9
-			MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02   0xf9
-			MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03   0xf9
-			MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04   0xf9
-			MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05   0xf9
-			MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06   0xf9
-			MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07   0xf9
-			MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08   0xf9
-			MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09   0xf9
-			MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10  0xf9
-			MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11  0xf9
-			MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12  0xf9
-			MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13  0xf9
-			MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14  0xf9
-			MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15  0xf9
-		>;
-	};
-
-	pinctrl_mmc_cd: gpiommccdgrp {
-		fsl,pins = <
-			 /* MMC1 CD */
-			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
-		>;
-	};
-
-	pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
-		fsl,pins = <
-			/* USBH_EN */
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058
-		>;
-	};
-
-	pinctrl_regulator_usbhub_pwr: gpioregusbhubpwrgrp {
-		fsl,pins = <
-			/* USBH_HUB_EN */
-			MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058
-		>;
-	};
-
-	pinctrl_regulator_usbotg_pwr: gpioregusbotgpwrgrp {
-		fsl,pins = <
-			/* USBO1 power en */
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058
-		>;
-	};
-
-	pinctrl_reset_moci: gpioresetmocigrp {
-		fsl,pins = <
-			/* RESET_MOCI control */
-			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058
-		>;
-	};
-
-	pinctrl_sd_cd: gpiosdcdgrp {
-		fsl,pins = <
-			/* SD1 CD */
-			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0
-		>;
-	};
-
-	pinctrl_spdif: spdifgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
-			MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
-		>;
-	};
-
-	pinctrl_touch_int: gpiotouchintgrp {
-		fsl,pins = <
-			/* STMPE811 interrupt */
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
-		>;
-	};
-
-	pinctrl_uart1_dce: uart1dcegrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
-		>;
-	};
-
-	/* DTE mode */
-	pinctrl_uart1_dte: uart1dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
-			MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1
-			MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
-		>;
-	};
-
-	/* Additional DTR, DSR, DCD */
-	pinctrl_uart1_ctrl: uart1ctrlgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
-			MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
-			MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
-		>;
-	};
-
-	pinctrl_uart2_dce: uart2dcegrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-		>;
-	};
-
-	/* DTE mode */
-	pinctrl_uart2_dte: uart2dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
-			MX6QDL_PAD_SD4_DAT5__UART2_CTS_B	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4_dce: uart4dcegrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
-		>;
-	};
-
-	/* DTE mode */
-	pinctrl_uart4_dte: uart4dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5_dce: uart5dcegrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-		>;
-	};
-
-	/* DTE mode */
-	pinctrl_uart5_dte: uart5dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17071
-			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10071
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
-			MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071
-			MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071
-			MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071
-			MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17071
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17071
-			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10071
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
-			/* eMMC reset */
-			MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3100mhzgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170b9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100b9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9
-			/* eMMC reset */
-			MX6QDL_PAD_SD3_RST__SD3_RESET  0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3200mhzgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170f9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100f9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9
-			/* eMMC reset */
-			MX6QDL_PAD_SD3_RST__SD3_RESET  0x170f9
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/imx6qdl-apf6.dtsi
deleted file mode 100644
index 1ebf29f43a24..000000000000
--- a/arch/arm/boot/dts/imx6qdl-apf6.dtsi
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * Copyright 2015 Armadeus Systems
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-duration = <10>;
-	phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-/* Bluetooth */
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-/* Wi-Fi */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	non-removable;
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = <38400000>;
-		tcxo-clock-frequency = <38400000>;
-	};
-};
-
-/* eMMC */
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	status = "okay";
-};
-
-&iomuxc {
-	apf6 {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24	0x130b0
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x130b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x13030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1f030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1f030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b0
-				MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b0
-				MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b0
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b0
-				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x130b0 /* BT_EN */
-			>;
-		};
-
-		pinctrl_usdhc1: usdhc1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17059
-				MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10059
-				MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17059
-				MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17059
-				MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17059
-				MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17059
-				MX6QDL_PAD_SD4_DAT0__GPIO2_IO08	0x1b0b0 /* WL_EN */
-				MX6QDL_PAD_SD4_DAT2__GPIO2_IO10	0x1b0b0 /* WL_IRQ */
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
deleted file mode 100644
index 9cd2a7477ed7..000000000000
--- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
+++ /dev/null
@@ -1,478 +0,0 @@
-/*
- * Copyright 2015 Armadeus Systems
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_disp1>;
-
-		display-timings {
-			lw700 {
-				clock-frequency = <33000033>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <96>;
-				hfront-porch = <96>;
-				vback-porch = <20>;
-				vfront-porch = <21>;
-				hsync-len = <64>;
-				vsync-len = <4>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-
-		port {
-			display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		user-button {
-			label = "User button";
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		user-led {
-			label = "User LED";
-			gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "on";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		reg_3p3v: 3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usbh1_vbus: usb-h1-vbus {
-			compatible = "regulator-fixed";
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: usb-otg-vbus {
-			compatible = "regulator-fixed";
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6-armadeus-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6-armadeus-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-out;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>,
-		   <&gpio4 10 GPIO_ACTIVE_LOW>,
-		   <&gpio4 11 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	touchscreen@48 {
-		compatible = "semtech,sx8654";
-		reg = <0x48>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touchscreen>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display_in>;
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio6 2 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-/* GPS */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-/* GSM */
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3 &pinctrl_gsm>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-/* console */
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usbh1_vbus>;
-	phy_type = "utmi";
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	vbus-supply = <&reg_usb_otg_vbus>;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-/* microSD */
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpios>;
-
-	apf6dev {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
-				MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
-				MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
-				MX6QDL_PAD_KEY_ROW1__GPIO4_IO09  0x1b0b0
-				MX6QDL_PAD_KEY_ROW2__GPIO4_IO11  0x1b0b0
-				MX6QDL_PAD_KEY_COL2__GPIO4_IO10  0x1b0b0
-			>;
-		};
-
-		pinctrl_flexcan2: flexcan2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
-				MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
-			>;
-		};
-
-		pinctrl_gpio_keys: gpiokeysgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
-			>;
-		};
-
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x130b0
-			>;
-		};
-
-		pinctrl_gpios: gpiosgrp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x100b1
-				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x100b1
-				MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x100b1
-				MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x100b1
-				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x100b1
-				MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x100b1
-				MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x100b1
-				MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x100b1
-				MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x100b1
-			>;
-		};
-
-		pinctrl_gsm: gsmgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x130b0 /* GSM_POKIN */
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x130b0 /* GSM_PWR_EN */
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-				MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
-			>;
-		};
-
-		pinctrl_ipu1_disp1: ipu1disp1grp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x100b1
-				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x100b1
-				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x100b1
-				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x100b1
-				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x100b1
-				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x100b1
-				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x100b1
-				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x100b1
-				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x100b1
-				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x100b1
-				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x100b1
-				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x100b1
-				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x100b1
-				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x100b1
-				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x100b1
-				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x100b1
-				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x100b1
-				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x100b1
-				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x100b1
-				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x100b1
-				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x100b1
-				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x100b1
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x130b0
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b0
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b0
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D23__UART3_CTS_B   0x1b0b0
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b0
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b0
-				MX6QDL_PAD_EIM_D31__UART3_RTS_B   0x1b0b0
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b0
-				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1b0b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
-			>;
-		};
-
-		pinctrl_spdif: spdifgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0
-			>;
-		};
-
-		pinctrl_touchscreen: touchscreengrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b0
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
deleted file mode 100644
index 7d64075204ae..000000000000
--- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ /dev/null
@@ -1,417 +0,0 @@
-/*
- * support fot the imx6 based aristainetos board
- *
- * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usbh1_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_aristainetos_usbh1_vbus>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-
-		reg_usbotg_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_aristainetos_usbotg_vbus>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	tmp103: tmp103@71 {
-		compatible = "ti,tmp103";
-		reg = <0x71>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	rtc@68 {
-		compatible = "dallas,m41t00";
-		reg = <0x68>;
-	};
-};
-
-&ecspi4 {
-	cs-gpios = <&gpio3 20 0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi4>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&pcie {
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usbh1_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usbotg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog &pinctrl_gpio>;
-
-	imx6qdl-aristainetos {
-		pinctrl_aristainetos_usbh1_vbus: aristainetos-usbh1-vbus {
-			fsl,pins = <MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0>;
-		};
-
-		pinctrl_aristainetos_usbotg_vbus: aristainetos-usbotg-vbus {
-			fsl,pins = <MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
-			>;
-		};
-
-		pinctrl_backlight: backlightgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b0
-				MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b0
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b0b0
-			>;
-		};
-
-		pinctrl_ecspi2: ecspi2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
-				MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
-				MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
-				MX6QDL_PAD_EIM_D24__GPIO3_IO24  0x100b1
-			>;
-		};
-
-		pinctrl_ecspi4: ecspi4grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
-				MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
-				MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
-				MX6QDL_PAD_EIM_D20__GPIO3_IO20  0x100b1
-				MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO  0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC    0x1b0b0
-				MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
-				MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
-				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN   0x1b0b0
-				MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER   0x1b0b0
-				MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
-				MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
-				MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN  0x1b0b0
-			>;
-		};
-
-		pinctrl_flexcan1: flexcan1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-			>;
-		};
-
-		pinctrl_flexcan2: flexcan2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX	0x1b0b0
-				MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX	0x1b0b0
-				>;
-		};
-
-		pinctrl_gpio: gpiogrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT2__GPIO2_IO10	0x1b0b0
-				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11	0x1b0b0
-				MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
-				MX6QDL_PAD_SD4_DAT5__GPIO2_IO13	0x1b0b0
-				MX6QDL_PAD_GPIO_3__GPIO1_IO03	0x1b0b0
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x1b0b0
-				MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b0b0
-				MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0
-				MX6QDL_PAD_GPIO_7__GPIO1_IO07	0x1b0b0
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08	0x1b0b0
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x1b0b0
-			>;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
-				MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
-			>;
-		};
-
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x10
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_ipu_disp: ipudisp1grp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
-				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
-				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
-				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
-				MX6QDL_PAD_DI0_PIN4__GPIO4_IO20			0x20000
-				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
-				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
-				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
-				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
-				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
-				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
-				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
-				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
-				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
-				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
-				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
-				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
-				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
-				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
-				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
-				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
-				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
-				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
-				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
-				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
-				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
-				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
-				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
-				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
-				>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
-			>;
-		};
-
-		pinctrl_usdhc1: usdhc1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
-				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
-				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
-				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
-				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
-				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
-				MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
deleted file mode 100644
index 1b1872873207..000000000000
--- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ /dev/null
@@ -1,630 +0,0 @@
-/*
- * support for the imx6 based aristainetos2 board
- *
- * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/imx6qdl-clock.h>
-
-/ {
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		reg_2p5v: 2p5v {
-			compatible = "regulator-fixed";
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: 3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usbh1_vbus: usb-h1-vbus {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-
-		reg_usbotg_vbus: usb-otg-vbus {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH
-		    &gpio4 10 GPIO_ACTIVE_HIGH
-		    &gpio4 11 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH &gpio2 27 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-};
-
-&ecspi4 {
-	cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi4>;
-	status = "okay";
-
-	flash: m25p80@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <1>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic@58 {
-		compatible = "dlg,da9063";
-		reg = <0x58>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <04 0x8>;
-
-		regulators {
-			bcore1 {
-				regulator-name = "bcore1";
-				regulator-always-on = <1>;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			bcore2 {
-				regulator-name = "bcore2";
-				regulator-always-on = <1>;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			bpro {
-				regulator-name = "bpro";
-				regulator-always-on = <1>;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			bperi {
-				regulator-name = "bperi";
-				regulator-always-on = <1>;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			bmem {
-				regulator-name = "bmem";
-				regulator-always-on = <1>;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo2 {
-				regulator-name = "ldo2";
-				regulator-always-on = <1>;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo3 {
-				regulator-name = "ldo3";
-				regulator-always-on = <1>;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo4 {
-				regulator-name = "ldo4";
-				regulator-always-on = <1>;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo5 {
-				regulator-name = "ldo5";
-				regulator-always-on = <1>;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo6 {
-				regulator-name = "ldo6";
-				regulator-always-on = <1>;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo7 {
-				regulator-name = "ldo7";
-				regulator-always-on = <1>;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo8 {
-				regulator-name = "ldo8";
-				regulator-always-on = <1>;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo9 {
-				regulator-name = "ldo9";
-				regulator-always-on = <1>;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo10 {
-				regulator-name = "ldo10";
-				regulator-always-on = <1>;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo11 {
-				regulator-name = "ldo11";
-				regulator-always-on = <1>;
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			bio {
-				regulator-name = "bio";
-				regulator-always-on = <1>;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-		};
-	};
-
-	tmp103: tmp103@71 {
-		compatible = "ti,tmp103";
-		reg = <0x71>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	expander: tca6416@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-
-	rtc@68 {
-		compatible = "dallas,m41t00";
-		reg = <0x68>;
-	};
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	status = "okay";
-
-	eeprom@50{
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	eeprom@57{
-		compatible = "atmel,24c64";
-		reg = <0x57>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_LOW>;
-	txd0-skew-ps = <0>;
-	txd1-skew-ps = <0>;
-	txd2-skew-ps = <0>;
-	txd3-skew-ps = <0>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&pcie {
-	reset-gpio = <&gpio2 16 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usbh1_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usbotg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio>;
-
-	pinctrl_audmux: audmux {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
-			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x100b1 /* SS0# */
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 /* SS1# */
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1 /* SS2# */
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_OE__ECSPI2_MISO  0x100b1
-			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
-			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
-			MX6QDL_PAD_EIM_RW__GPIO2_IO26   0x100b1 /* SS0# */
-			MX6QDL_PAD_EIM_LBA__GPIO2_IO27  0x100b1 /* SS1# */
-		>;
-	};
-
-	pinctrl_ecspi4: ecspi4grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
-			MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
-			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
-			MX6QDL_PAD_EIM_D29__GPIO3_IO29  0x100b1 /* SS0# */
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02  0x100b1 /* SS1# */
-			MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0
-			MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
-			MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio: gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0 /* led enable */
-			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0 /* LCD power enable */
-			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0 /* led yellow */
-			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0 /* led red */
-			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b0b0 /* led green */
-			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0 /* led blue */
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0 /* Profibus IRQ */
-			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b0 /* FPGA IRQ */
-			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x1b0b0 /* spi bus #2 SS driver enable */
-			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0 /* RST_LOC# PHY reset input (has pull-down!)*/
-			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1b0b0 /* USB_OTG_ID = GPIO1_24*/
-			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x1b0b0 /* Touchscreen IRQ */
-			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b0b0 /* PCIe reset */
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpmi-nand {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
-			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1
-			MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b0
-			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31	0x1b0b0 /* backlight enable */
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D20__UART1_RTS_B		0x1b0b1
-			MX6QDL_PAD_EIM_D19__UART1_CTS_B		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
-			MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
-			MX6QDL_PAD_EIM_D31__UART3_RTS_B	  0x1b0b1
-			MX6QDL_PAD_EIM_D23__UART3_CTS_B	  0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
-		>;
-	};
-
-	pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbus {
-		fsl,pins = <MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x130b0>;
-	};
-
-	pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbus {
-		fsl,pins = <MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x130b0>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
-			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
-			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x1b0b0 /* SD1 card detect input */
-			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b0b0 /* SD1 write protect input */
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x71
-			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x71
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71
-			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x1b0b0 /* SD2 level shifter output enable */
-			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0 /* SD2 card detect input */
-			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10		0x1b0b0 /* SD2 write protect input */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
deleted file mode 100644
index ad84eddb6836..000000000000
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ /dev/null
@@ -1,890 +0,0 @@
-/*
- * Copyright 2014-2016 Toradex AG
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Toradex Colibri iMX6DL/S Module";
-	compatible = "toradex,colibri_imx6dl", "fsl,imx6dl";
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-		pwms = <&pwm3 0 5000000>;
-		enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */
-		status = "disabled";
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usb_host_vbus: regulator-usb-host-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
-		regulator-name = "usb_host_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */
-		status = "disabled";
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx6dl-colibri-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"Headphone Jack", "HP_OUT",
-			"LINE_IN", "Line In Jack",
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias";
-		mux-int-port = <1>;
-		mux-ext-port = <5>;
-	};
-
-	/* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */
-	sound_spdif: sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-in;
-		spdif-out;
-		status = "disabled";
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux &pinctrl_mic_gnd>;
-	status = "okay";
-};
-
-/* Optional on SODIMM 55/63 */
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "disabled";
-};
-
-/* Optional on SODIMM 178/188 */
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "disabled";
-};
-
-/* Colibri SSP */
-&ecspi4 {
-	cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi4>;
-	status = "disabled";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rmii";
-	status = "okay";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmi_ddc>;
-	status = "disabled";
-};
-
-/*
- * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
- * touch screen controller
- */
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pmic: pfuze100@08 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* vgen1: unused */
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* vgen3: unused */
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-		lrclk-strength = <3>;
-	};
-
-	/* STMPE811 touch screen controller */
-	stmpe811@41 {
-		compatible = "st,stmpe811";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touch_int>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x41>;
-		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-parent = <&gpio6>;
-		interrupt-controller;
-		id = <0>;
-		blocks = <0x5>;
-		irq-trigger = <0x1>;
-
-		stmpe_touchscreen {
-			compatible = "st,stmpe-ts";
-			reg = <0>;
-			/* 3.25 MHz ADC clock speed */
-			st,adc-freq = <1>;
-			/* 8 sample average control */
-			st,ave-ctrl = <3>;
-			/* 7 length fractional part in z */
-			st,fraction-z = <7>;
-			/*
-			 * 50 mA typical 80 mA max touchscreen drivers
-			 * current limit value
-			 */
-			st,i-drive = <1>;
-			/* 12-bit ADC */
-			st,mod-12b = <1>;
-			/* internal ADC reference */
-			st,ref-sel = <0>;
-			/* ADC converstion time: 80 clocks */
-			st,sample-time = <4>;
-			/* 1 ms panel driver settling time */
-			st,settling = <3>;
-			/* 5 ms touch detect interrupt delay */
-			st,touch-det-delay = <5>;
-		};
-	};
-};
-
-/*
- * I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
- */
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "recovery";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_recovery>;
-	scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-	status = "disabled";
-};
-
-/* Colibri PWM<B> */
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "disabled";
-};
-
-/* Colibri PWM<D> */
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "disabled";
-};
-
-/* Colibri PWM<A> */
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "disabled";
-};
-
-/* Colibri PWM<C> */
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "disabled";
-};
-
-/* Optional S/PDIF out on SODIMM 137 */
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	status = "disabled";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-/* Colibri UART_A */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
-	fsl,dte-mode;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-/* Colibri UART_B */
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_dte>;
-	fsl,dte-mode;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-/* Colibri UART_C */
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3_dte>;
-	fsl,dte-mode;
-	status = "disabled";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	disable-over-current;
-	dr_mode = "peripheral";
-	status = "disabled";
-};
-
-/* Colibri MMC */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	vqmmc-supply = <&reg_3p3v>;
-	bus-width = <4>;
-	voltage-ranges = <3300 3300>;
-	status = "disabled";
-};
-
-/* eMMC */
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	vqmmc-supply = <&reg_3p3v>;
-	bus-width = <8>;
-	voltage-ranges = <3300 3300>;
-	non-removable;
-	status = "okay";
-};
-
-&weim {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_weim_sram  &pinctrl_weim_cs0
-		     &pinctrl_weim_cs1   &pinctrl_weim_cs2
-		     &pinctrl_weim_rdnwr &pinctrl_weim_npwe>;
-	#address-cells = <2>;
-	#size-cells = <1>;
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__AUD5_TXC	0x130b0
-			MX6QDL_PAD_KEY_ROW0__AUD5_TXD	0x130b0
-			MX6QDL_PAD_KEY_COL1__AUD5_TXFS	0x130b0
-			MX6QDL_PAD_KEY_ROW1__AUD5_RXD	0x130b0
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x000b0
-		>;
-	};
-
-	pinctrl_cam_mclk: cammclkgrp {
-		fsl,pins = <
-			/* Parallel Camera CAM sys_mclk */
-			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2	0x00b0
-		>;
-	};
-
-	pinctrl_ecspi4: ecspi4grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D22__ECSPI4_MISO	0x100b1
-			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI	0x100b1
-			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
-			/* SPI CS */
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x000b1
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK     ((1<<30) | 0x1b0b0)
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
-			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio_bl_on: gpioblon {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio_keys: gpiokeys {
-		fsl,pins = <
-			/* Power button */
-			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b0
-		>;
-	};
-
-	pinctrl_hdmi_ddc: hdmiddcgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
-			MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3_recovery: i2c3recoverygrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1
-			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1
-		>;
-	};
-
-	pinctrl_ipu1_csi0: ipu1csi0grp { /* Parallel Camera */
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12	0xb0b1
-			MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13	0xb0b1
-			MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14	0xb0b1
-			MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15	0xb0b1
-			MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16	0xb0b1
-			MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17	0xb0b1
-			MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18	0xb0b1
-			MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19	0xb0b1
-			MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK	0xb0b1
-			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC	0xb0b1
-			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC	0xb0b1
-			/* Disable PWM pins on camera interface */
-			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x40
-			MX6QDL_PAD_GPIO_1__GPIO1_IO01		0x40
-		>;
-	};
-
-	pinctrl_ipu1_lcdif: ipu1lcdifgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0xa1
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0xa1
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0xa1
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0xa1
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0xa1
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0xa1
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0xa1
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0xa1
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0xa1
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0xa1
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0xa1
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0xa1
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0xa1
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0xa1
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0xa1
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0xa1
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0xa1
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0xa1
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0xa1
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0xa1
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0xa1
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0xa1
-		>;
-	};
-
-	pinctrl_mic_gnd: gpiomicgnd {
-		fsl,pins = <
-			/* Controls Mic GND, PU or '1' pull Mic GND to GND */
-			MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0
-		>;
-	};
-
-	pinctrl_mmc_cd: gpiommccd {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x80000000
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
-			MX6QDL_PAD_EIM_A21__GPIO2_IO17	0x00040
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b1
-			MX6QDL_PAD_EIM_A22__GPIO2_IO16	0x00040
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT2__PWM4_OUT	0x1b0b1
-		>;
-	};
-
-	pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
-		fsl,pins = <
-			/* USBH_EN */
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31	0x0f058
-		>;
-	};
-
-	pinctrl_spdif: spdifgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
-		>;
-	};
-
-	pinctrl_touch_int: gpiotouchintgrp {
-		fsl,pins = <
-			/* STMPE811 interrupt */
-			MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x1b0b0
-		>;
-	};
-
-	pinctrl_uart1_dce: uart1dcegrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
-		>;
-	};
-
-	/* DTE mode */
-	pinctrl_uart1_dte: uart1dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
-			MX6QDL_PAD_EIM_D19__UART1_RTS_B	0x1b0b1
-			MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
-		>;
-	};
-
-	/* Additional DTR, DSR, DCD */
-	pinctrl_uart1_ctrl: uart1ctrlgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
-			MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
-			MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
-		>;
-	};
-
-	pinctrl_uart2_dte: uart2dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
-			MX6QDL_PAD_SD4_DAT5__UART2_CTS_B	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3_dte: uart3dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CLK__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_CMD__UART3_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbc_det: usbcdetgrp {
-		fsl,pins = <
-			/* USBC_DET */
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
-			/* USBC_DET_EN */
-			MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26	0x0f058
-			/* USBC_DET_OVERWRITE */
-			MX6QDL_PAD_RGMII_RXC__GPIO6_IO30	0x0f058
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17071
-			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10071
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17071
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17071
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17071
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17071
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
-			/* eMMC reset */
-			MX6QDL_PAD_SD3_RST__SD3_RESET	0x17059
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3100mhzgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170b9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100b9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x170b9
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x170b9
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x170b9
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x170b9
-			/* eMMC reset */
-			MX6QDL_PAD_SD3_RST__SD3_RESET	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3200mhzgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170f9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100f9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x170f9
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x170f9
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x170f9
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x170f9
-			/* eMMC reset */
-			MX6QDL_PAD_SD3_RST__SD3_RESET	0x170f9
-		>;
-	};
-
-	pinctrl_weim_cs0: weimcs0grp {
-		fsl,pins = <
-			/* nEXT_CS0 */
-			MX6QDL_PAD_EIM_CS0__EIM_CS0_B	0xb0b1
-		>;
-	};
-
-	pinctrl_weim_cs1: weimcs1grp {
-		fsl,pins = <
-			/* nEXT_CS1 */
-			MX6QDL_PAD_EIM_CS1__EIM_CS1_B	0xb0b1
-		>;
-	};
-
-	pinctrl_weim_cs2: weimcs2grp {
-		fsl,pins = <
-			/* nEXT_CS2 */
-			MX6QDL_PAD_SD2_DAT1__EIM_CS2_B	0xb0b1
-		>;
-	};
-
-	pinctrl_weim_sram: weimsramgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
-			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
-			/* Data */
-			MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00	0x1b0b0
-			MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT4__EIM_DATA02	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT5__EIM_DATA03	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT6__EIM_DATA04	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT7__EIM_DATA05	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT8__EIM_DATA06	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT9__EIM_DATA07	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT12__EIM_DATA08	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT13__EIM_DATA09	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT14__EIM_DATA10	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT15__EIM_DATA11	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT16__EIM_DATA12	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT17__EIM_DATA13	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT18__EIM_DATA14	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT19__EIM_DATA15	0x1b0b0
-			/* Address */
-			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
-			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
-			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
-			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
-			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
-			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
-			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
-			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
-			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
-			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
-			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
-			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
-			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
-			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
-			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
-			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
-		>;
-	};
-
-	pinctrl_weim_rdnwr: weimrdnwr {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CLK__GPIO1_IO10		0x0040
-			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23	0x130b0
-		>;
-	};
-
-	pinctrl_weim_npwe: weimnpwe {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x0040
-			MX6QDL_PAD_RGMII_TD2__GPIO6_IO22	0x130b0
-		>;
-	};
-
-	/* ADDRESS[16:18] [25] used as GPIO */
-	pinctrl_weim_gpio_1: weimgpio-1 {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
-			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-		>;
-	};
-
-	/* ADDRESS[19:24] used as GPIO */
-	pinctrl_weim_gpio_2: weimgpio-2 {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
-			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-		>;
-	};
-
-	/* DATA[16:31] used as GPIO */
-	pinctrl_weim_gpio_3: weimgpio-3 {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b0
-			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b0
-			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0
-			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
-			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b0
-			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0
-			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x1b0b0
-			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x1b0b0
-			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x1b0b0
-			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
-			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x1b0b0
-			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
-			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b0
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
-		>;
-	};
-
-	/* DQM[0:3] used as GPIO */
-	pinctrl_weim_gpio_4: weimgpio-4 {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
-			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
-			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
-			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
-		>;
-	};
-
-	/* RDY used as GPIO */
-	pinctrl_weim_gpio_5: weimgpio-5 {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b0
-		>;
-	};
-
-	/* ADDRESS[16] DATA[30] used as GPIO */
-	pinctrl_weim_gpio_6: weimgpio-6 {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
deleted file mode 100644
index 14fff4ee6516..000000000000
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * Copyright (C) 2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include "imx6qdl-microsom.dtsi"
-#include "imx6qdl-microsom-ar8035.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	ir_recv: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio3 9 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cubox_i_ir>;
-	};
-
-	pwmleds {
-		compatible = "pwm-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cubox_i_pwm1>;
-
-		front {
-			active-low;
-			label = "imx6:red:front";
-			max-brightness = <248>;
-			pwms = <&pwm1 0 50000>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		reg_3p3v: 3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usbh1_vbus: usb-h1-vbus {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio1 0 0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-
-		reg_usbotg_vbus: usb-otg-vbus {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio3 22 0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "Integrated SPDIF";
-		/* IMX6 doesn't implement this yet */
-		spdif-controller = <&spdif>;
-		spdif-out;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pinctrl_gpio_key>;
-		pinctrl-names = "default";
-
-		button_0 {
-			label = "Button 0";
-			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-	};
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_hdmi>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_i2c3>;
-
-	status = "okay";
-
-	rtc: pcf8523@68 {
-		compatible = "nxp,pcf8523";
-		reg = <0x68>;
-	};
-};
-
-&iomuxc {
-	cubox_i {
-		pinctrl_cubox_i_hdmi: cubox-i-hdmi {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
-			>;
-		};
-
-		pinctrl_cubox_i_i2c2: cubox-i-i2c2 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_cubox_i_i2c3: cubox-i-i2c3 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_cubox_i_ir: cubox-i-ir {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000
-			>;
-		};
-
-		pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led {
-			fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>;
-		};
-
-		pinctrl_cubox_i_spdif: cubox-i-spdif {
-			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
-		};
-
-		pinctrl_cubox_i_usbh1: cubox-i-usbh1 {
-			fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>;
-		};
-
-		pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
-			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
-		};
-
-		pinctrl_cubox_i_usbotg: cubox-i-usbotg {
-			/*
-			 * The Cubox-i pulls ID low, but as it's pointless
-			 * leaving it as a pull-up, even if it is just 10uA.
-			 */
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
-			>;
-		};
-
-		pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
-			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>;
-		};
-
-		pinctrl_cubox_i_usdhc2_aux: cubox-i-usdhc2-aux {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
-				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
-			>;
-		};
-
-		pinctrl_cubox_i_usdhc2: cubox-i-usdhc2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
-			>;
-		};
-
-		pinctrl_gpio_key: gpio-key {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA8__GPIO3_IO08	0x17059
-			>;
-		};
-	};
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_spdif>;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
-	vbus-supply = <&reg_usbh1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
-	vbus-supply = <&reg_usbotg_vbus>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
-	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
deleted file mode 100644
index d78312c63672..000000000000
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ /dev/null
@@ -1,200 +0,0 @@
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dummy_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "dummy-supply";
-		};
-
-		reg_usb_otg_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-};
-
-&ecspi3 {
-	cs-gpios = <&gpio4 24 0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "sst,sst25vf040b", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	status = "okay";
-	phy-mode = "rgmii";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-dfi-fs700-m60 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 /* PMIC irq */
-				MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x80000000 /* MAX11801 irq */
-				MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000030b0 /* Backlight enable */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 /* card detect */
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_ecspi3: ecspi3grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
-			>;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc2 { /* module slot */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usdhc3 { /* baseboard slot */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-};
-
-&usdhc4 { /* eMMC */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
deleted file mode 100644
index e8c1edc82e6e..000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ /dev/null
@@ -1,452 +0,0 @@
-/*
- * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		led1 = &led1;
-		nand = &gpmi;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		bootargs = "console=ttymxc1,115200";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: user1 {
-			label = "user1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: user2 {
-			label = "user2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-			default-state = "off";
-		};
-	};
-
-	memory {
-		reg = <0x10000000 0x20000000>;
-	};
-
-	pps {
-		compatible = "pps-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pps>;
-		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_5p0v: regulator-5p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "5P0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	rtc: ds1672@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	ltc3676: pmic@3c {
-		compatible = "lltc,ltc3676";
-		reg = <0x3c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-		regulators {
-			/* VDD_SOC (1+R1/R2 = 1.635) */
-			reg_vdd_soc: sw1 {
-				regulator-name = "vddsoc";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
-			reg_1p8v: sw2 {
-				regulator-name = "vdd1p8";
-				regulator-min-microvolt = <1033310>;
-				regulator-max-microvolt = <2004000>;
-				lltc,fb-voltage-divider = <301000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_ARM (1+R1/R2 = 1.635) */
-			reg_vdd_arm: sw3 {
-				regulator-name = "vddarm";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_DDR (1+R1/R2 = 2.105) */
-			reg_vdd_ddr: sw4 {
-				regulator-name = "vddddr";
-				regulator-min-microvolt = <868310>;
-				regulator-max-microvolt = <1684000>;
-				lltc,fb-voltage-divider = <221000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
-			reg_2p5v: ldo2 {
-				regulator-name = "vdd2p5";
-				regulator-min-microvolt = <2490375>;
-				regulator-max-microvolt = <2490375>;
-				lltc,fb-voltage-divider = <487000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_HIGH (1+R1/R2 = 4.17) */
-			reg_3p0v: ldo4 {
-				regulator-name = "vdd3p0";
-				regulator-min-microvolt = <3023250>;
-				regulator-max-microvolt = <3023250>;
-				lltc,fb-voltage-divider = <634000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
-	status = "disabled";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	imx6qdl-gw51xx {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0 /* PHY Reset */
-			>;
-		};
-
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
-			>;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
-			>;
-		};
-
-		pinctrl_pmic: pmicgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
-			>;
-		};
-
-		pinctrl_pps: ppsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm2: pwm2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
-			>;
-		};
-
-		pinctrl_wdog: wdoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
deleted file mode 100644
index 91991d63a69c..000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ /dev/null
@@ -1,636 +0,0 @@
-/*
- * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		led1 = &led1;
-		led2 = &led2;
-		nand = &gpmi;
-		ssi0 = &ssi1;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		bootargs = "console=ttymxc1,115200";
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: user1 {
-			label = "user1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: user2 {
-			label = "user2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-			default-state = "off";
-		};
-
-		led2: user3 {
-			label = "user3";
-			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
-			default-state = "off";
-		};
-	};
-
-	memory {
-		reg = <0x10000000 0x20000000>;
-	};
-
-	pps {
-		compatible = "pps-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pps>;
-		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
-	reg_1p0v: regulator-1p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P0V";
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_5p0v: regulator-5p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "5P0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "fsl,imx6q-ventana-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "sgtl5000-audio";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi3 {
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	rtc: ds1672@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	ltc3676: pmic@3c {
-		compatible = "lltc,ltc3676";
-		reg = <0x3c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-		regulators {
-			/* VDD_SOC (1+R1/R2 = 1.635) */
-			reg_vdd_soc: sw1 {
-				regulator-name = "vddsoc";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
-			reg_1p8v: sw2 {
-				regulator-name = "vdd1p8";
-				regulator-min-microvolt = <1033310>;
-				regulator-max-microvolt = <2004000>;
-				lltc,fb-voltage-divider = <301000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_ARM (1+R1/R2 = 1.635) */
-			reg_vdd_arm: sw3 {
-				regulator-name = "vddarm";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_DDR (1+R1/R2 = 2.105) */
-			reg_vdd_ddr: sw4 {
-				regulator-name = "vddddr";
-				regulator-min-microvolt = <868310>;
-				regulator-max-microvolt = <1684000>;
-				lltc,fb-voltage-divider = <221000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
-			reg_2p5v: ldo2 {
-				regulator-name = "vdd2p5";
-				regulator-min-microvolt = <2490375>;
-				regulator-max-microvolt = <2490375>;
-				lltc,fb-voltage-divider = <487000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_AUD_1P8: Audio codec */
-			reg_aud_1p8v: ldo3 {
-				regulator-name = "vdd1p8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-			};
-
-			/* VDD_HIGH (1+R1/R2 = 4.17) */
-			reg_3p0v: ldo4 {
-				regulator-name = "vdd3p0";
-				regulator-min-microvolt = <3023250>;
-				regulator-max-microvolt = <3023250>;
-				lltc,fb-voltage-divider = <634000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_1p8v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	touchscreen: egalax_ts@04 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <12 2>;
-		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	no-1-8-v; /* firmware will remove if board revision supports */
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	imx6qdl-gw52xx {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
-				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
-				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
-				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x130b0 /* AUD4_MCK */
-			>;
-		};
-
-		pinctrl_ecspi3: escpi3grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x100b1
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0 /* PHY Reset */
-			>;
-		};
-
-		pinctrl_flexcan1: flexcan1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
-			>;
-		};
-
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x1b0b0
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x1b0b0
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x1b0b0
-			>;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE_RST# */
-			>;
-		};
-
-		pinctrl_pmic: pmicgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
-			>;
-		};
-
-		pinctrl_pps: ppsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm2: pwm2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0 /* OTG_PWR_EN */
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
-				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x170b9
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
-				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
-				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
-			>;
-		};
-
-		pinctrl_wdog: wdoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
deleted file mode 100644
index 5bc6ed1a5b35..000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ /dev/null
@@ -1,620 +0,0 @@
-/*
- * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		led1 = &led1;
-		led2 = &led2;
-		nand = &gpmi;
-		ssi0 = &ssi1;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		bootargs = "console=ttymxc1,115200";
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: user1 {
-			label = "user1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: user2 {
-			label = "user2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-			default-state = "off";
-		};
-
-		led2: user3 {
-			label = "user3";
-			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
-			default-state = "off";
-		};
-	};
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	pps {
-		compatible = "pps-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pps>;
-		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
-	reg_1p0v: regulator-1p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P0V";
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "fsl,imx6q-ventana-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "sgtl5000-audio";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	rtc: ds1672@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	ltc3676: pmic@3c {
-		compatible = "lltc,ltc3676";
-		reg = <0x3c>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-		regulators {
-			/* VDD_SOC (1+R1/R2 = 1.635) */
-			reg_vdd_soc: sw1 {
-				regulator-name = "vddsoc";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
-			reg_1p8v: sw2 {
-				regulator-name = "vdd1p8";
-				regulator-min-microvolt = <1033310>;
-				regulator-max-microvolt = <2004000>;
-				lltc,fb-voltage-divider = <301000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_ARM (1+R1/R2 = 1.635) */
-			reg_vdd_arm: sw3 {
-				regulator-name = "vddarm";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_DDR (1+R1/R2 = 2.105) */
-			reg_vdd_ddr: sw4 {
-				regulator-name = "vddddr";
-				regulator-min-microvolt = <868310>;
-				regulator-max-microvolt = <1684000>;
-				lltc,fb-voltage-divider = <221000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
-			reg_2p5v: ldo2 {
-				regulator-name = "vdd2p5";
-				regulator-min-microvolt = <2490375>;
-				regulator-max-microvolt = <2490375>;
-				lltc,fb-voltage-divider = <487000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_AUD_1P8: Audio codec */
-			reg_aud_1p8v: ldo3 {
-				regulator-name = "vdd1p8a";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-			};
-
-			/* VDD_HIGH (1+R1/R2 = 4.17) */
-			reg_3p0v: ldo4 {
-				regulator-name = "vdd3p0";
-				regulator-min-microvolt = <3023250>;
-				regulator-max-microvolt = <3023250>;
-				lltc,fb-voltage-divider = <634000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_1p8v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	touchscreen: egalax_ts@04 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <11 2>;
-		wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	no-1-8-v; /* firmware will remove if board revision supports */
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	imx6qdl-gw53xx {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
-				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
-				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
-				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_flexcan1: flexcan1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
-			>;
-		};
-
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x1b0b0
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x1b0b0
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x1b0b0
-			>;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x1b0b0 /* PCIE RST */
-			>;
-		};
-
-		pinctrl_pmic: pmicgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
-			>;
-		};
-
-		pinctrl_pps: ppsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm2: pwm2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
-				MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
-				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
-				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
-				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
-			>;
-		};
-
-		pinctrl_wdog: wdoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
deleted file mode 100644
index 66fcf838e964..000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ /dev/null
@@ -1,689 +0,0 @@
-/*
- * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		led1 = &led1;
-		led2 = &led2;
-		nand = &gpmi;
-		ssi0 = &ssi1;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		bootargs = "console=ttymxc1,115200";
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: user1 {
-			label = "user1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: user2 {
-			label = "user2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-			default-state = "off";
-		};
-
-		led2: user3 {
-			label = "user3";
-			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
-			default-state = "off";
-		};
-	};
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	pps {
-		compatible = "pps-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pps>;
-		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_1p0v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "1P0V";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_h1_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-ventana-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "sgtl5000-audio";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	rtc: ds1672@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pmic: pfuze100@08 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&sw4_reg>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	touchscreen: egalax_ts@04 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <12 2>;
-		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
-	status = "disabled";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-&pwm4 {
-	pinctrl-names = "default", "state_dio";
-	pinctrl-0 = <&pinctrl_pwm4_backlight>;
-	pinctrl-1 = <&pinctrl_pwm4_dio>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	no-1-8-v; /* firmware will remove if board revision supports */
-	status = "okay";
-};
-
-&wdog1 {
-	status = "disabled";
-};
-
-&wdog2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
-
-&iomuxc {
-	imx6qdl-gw54xx {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
-				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
-				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
-				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_ecspi2: escpi2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
-				MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
-				MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
-				MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x100b1
-			>;
-		};
-
-		pinctrl_flexcan1: flexcan1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
-			>;
-		};
-
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-			>;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0 /* PCIE IRQ */
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE RST */
-			>;
-		};
-
-		pinctrl_pps: ppsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm2: pwm2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4_backlight: pwm4grpbacklight {
-			fsl,pins = <
-				/* LVDS_PWM J6.5 */
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4_dio: pwm4grpdio {
-			fsl,pins = <
-				/* DIO3 J16.4 */
-				MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
-				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
-				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
-				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
-			>;
-		};
-
-		pinctrl_wdog: wdoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT3__WDOG2_B		0x1b0b0
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
deleted file mode 100644
index 405b40310ddf..000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ /dev/null
@@ -1,429 +0,0 @@
-/*
- * Copyright 2014 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		nand = &gpmi;
-		ssi0 = &ssi1;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		bootargs = "console=ttymxc1,115200";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: user1 {
-			label = "user1";
-			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	memory {
-		reg = <0x10000000 0x20000000>;
-	};
-
-	reg_5p0v: regulator-5p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "5P0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	rtc: ds1672@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	ltc3676: pmic@3c {
-		compatible = "lltc,ltc3676";
-		reg = <0x3c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-		regulators {
-			/* VDD_SOC (1+R1/R2 = 1.635) */
-			reg_vdd_soc: sw1 {
-				regulator-name = "vddsoc";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_DDR (1+R1/R2 = 2.105) */
-			reg_vdd_ddr: sw2 {
-				regulator-name = "vddddr";
-				regulator-min-microvolt = <868310>;
-				regulator-max-microvolt = <1684000>;
-				lltc,fb-voltage-divider = <221000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_ARM (1+R1/R2 = 1.635) */
-			reg_vdd_arm: sw3 {
-				regulator-name = "vddarm";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_3P3 (1+R1/R2 = 1.281) */
-			reg_3p3: sw4 {
-				regulator-name = "vdd3p3";
-				regulator-min-microvolt = <1880000>;
-				regulator-max-microvolt = <3647000>;
-				lltc,fb-voltage-divider = <200000 56200>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_1P8a (1+R1/R2 = 2.505): HDMI In core */
-			reg_1p8a: ldo2 {
-				regulator-name = "vdd1p8a";
-				regulator-min-microvolt = <1816125>;
-				regulator-max-microvolt = <1816125>;
-				lltc,fb-voltage-divider = <301000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_1P8b: HDMI In analog */
-			reg_1p8b: ldo3 {
-				regulator-name = "vdd1p8b";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-			};
-
-			/* VDD_HIGH (1+R1/R2 = 4.17) */
-			reg_3p0: ldo4 {
-				regulator-name = "vdd3p0";
-				regulator-min-microvolt = <3023250>;
-				regulator-max-microvolt = <3023250>;
-				lltc,fb-voltage-divider = <634000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	gpio_exp: pca9555@24 {
-		compatible = "nxp,pca9555";
-		reg = <0x24>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	imx6qdl-gw51xx {
-		pinctrl_flexcan1: flexcan1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
-			>;
-		};
-
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x1b0b0
-			>;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0 /* PCIE RST */
-			>;
-		};
-
-		pinctrl_pmic: pmicgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
-			>;
-		};
-
-		pinctrl_pwm2: pwm2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			>;
-		};
-
-		pinctrl_wdog: wdoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
deleted file mode 100644
index 67613dd7cc92..000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ /dev/null
@@ -1,374 +0,0 @@
-/*
- * Copyright 2014 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		led1 = &led1;
-		led2 = &led2;
-		nand = &gpmi;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		bootargs = "console=ttymxc1,115200";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: user1 {
-			label = "user1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: user2 {
-			label = "user2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-			default-state = "off";
-		};
-
-		led2: user3 {
-			label = "user3";
-			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
-			default-state = "off";
-		};
-	};
-
-	memory {
-		reg = <0x10000000 0x20000000>;
-	};
-
-	reg_1p0v: regulator-1p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P0V";
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_5p0v: regulator-5p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "5P0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	rtc: ds1672@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	ltc3676: pmic@3c {
-		compatible = "lltc,ltc3676";
-		reg = <0x3c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-		regulators {
-			/* VDD_SOC (1+R1/R2 = 1.635) */
-			reg_vdd_soc: sw1 {
-				regulator-name = "vddsoc";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_1P8 (1+R1/R2 = 2.505): ENET-PHY */
-			reg_1p8v: sw2 {
-				regulator-name = "vdd1p8";
-				regulator-min-microvolt = <1033310>;
-				regulator-max-microvolt = <2004000>;
-				lltc,fb-voltage-divider = <301000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_ARM (1+R1/R2 = 1.635) */
-			reg_vdd_arm: sw3 {
-				regulator-name = "vddarm";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_DDR (1+R1/R2 = 2.105) */
-			reg_vdd_ddr: sw4 {
-				regulator-name = "vddddr";
-				regulator-min-microvolt = <868310>;
-				regulator-max-microvolt = <1684000>;
-				lltc,fb-voltage-divider = <221000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
-			reg_2p5v: ldo2 {
-				regulator-name = "vdd2p5";
-				regulator-min-microvolt = <2490375>;
-				regulator-max-microvolt = <2490375>;
-				lltc,fb-voltage-divider = <487000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_HIGH (1+R1/R2 = 4.17) */
-			reg_3p0v: ldo4 {
-				regulator-name = "vdd3p0";
-				regulator-min-microvolt = <3023250>;
-				regulator-max-microvolt = <3023250>;
-				lltc,fb-voltage-divider = <634000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay"; };
-
-&usbh1 {
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	imx6qdl-gw552x {
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-			>;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
-			>;
-		};
-
-		pinctrl_pmic: pmicgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
-			>;
-		};
-
-		pinctrl_pwm2: pwm2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_wdog: wdoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
deleted file mode 100644
index 57374dddf98d..000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
+++ /dev/null
@@ -1,513 +0,0 @@
-/*
- * Copyright 2016 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		led1 = &led1;
-		nand = &gpmi;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: user1 {
-			label = "user1";
-			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: user2 {
-			label = "user2";
-			gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-			default-state = "off";
-		};
-	};
-
-	memory {
-		reg = <0x10000000 0x20000000>;
-	};
-
-	pps {
-		compatible = "pps-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pps>;
-		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
-	reg_5p0v: regulator-5p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "5P0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmi>;
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	rtc: ds1672@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	ltc3676: pmic@3c {
-		compatible = "lltc,ltc3676";
-		reg = <0x3c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-		regulators {
-			/* VDD_SOC (1+R1/R2 = 1.635) */
-			reg_vdd_soc: sw1 {
-				regulator-name = "vddsoc";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_DDR (1+R1/R2 = 2.105) */
-			reg_vdd_ddr: sw2 {
-				regulator-name = "vddddr";
-				regulator-min-microvolt = <868310>;
-				regulator-max-microvolt = <1684000>;
-				lltc,fb-voltage-divider = <221000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_ARM (1+R1/R2 = 1.635) */
-			reg_vdd_arm: sw3 {
-				regulator-name = "vddarm";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_3P3 (1+R1/R2 = 1.281) */
-			reg_3p3v: sw4 {
-				regulator-name = "vdd3p3";
-				regulator-min-microvolt = <1880000>;
-				regulator-max-microvolt = <3647000>;
-				lltc,fb-voltage-divider = <200000 56200>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_1P8a (1+R1/R2 = 2.505): Analog Video Decoder */
-			reg_1p8a: ldo2 {
-				regulator-name = "vdd1p8a";
-				regulator-min-microvolt = <1816125>;
-				regulator-max-microvolt = <1816125>;
-				lltc,fb-voltage-divider = <301000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_1P8b: microSD VDD_1P8 */
-			reg_1p8b: ldo3 {
-				regulator-name = "vdd1p8b";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-			};
-
-			/* VDD_HIGH (1+R1/R2 = 4.17) */
-			reg_3p0v: ldo4 {
-				regulator-name = "vdd3p0";
-				regulator-min-microvolt = <3023250>;
-				regulator-max-microvolt = <3023250>;
-				lltc,fb-voltage-divider = <634000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
-	status = "disabled";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-		>;
-	};
-
-	pinctrl_hdmi: hdmigrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x4001b0b0 /* PCIESKT_WDIS# */
-		>;
-	};
-
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
-		>;
-	};
-
-	pinctrl_pps: ppsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
-			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
-			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
-			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
deleted file mode 100644
index fd4b68be9fe9..000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ /dev/null
@@ -1,641 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		led1 = &led1;
-		led2 = &led2;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: user1 {
-			label = "user1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: user2 {
-			label = "user2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-			default-state = "off";
-		};
-
-		led2: user3 {
-			label = "user3";
-			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
-			default-state = "off";
-		};
-	};
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	pps {
-		compatible = "pps-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pps>;
-		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_1p0v: regulator-1p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P0V";
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	status = "okay";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch@0 {
-			compatible = "marvell,mv88e6085";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "lan4";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan3";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan2";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan1";
-				};
-
-				port@5 {
-					reg = <5>;
-					label = "cpu";
-					ethernet = <&fec>;
-				};
-			};
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pca9555: gpio@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	dts1672: rtc@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	ltc3676: pmic@3c {
-		compatible = "lltc,ltc3676";
-		reg = <0x3c>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-		regulators {
-			/* VDD_SOC (1+R1/R2 = 1.635) */
-			reg_vdd_soc: sw1 {
-				regulator-name = "vddsoc";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_1P8 (1+R1/R2 = 2.505): GbE switch */
-			reg_1p8v: sw2 {
-				regulator-name = "vdd1p8";
-				regulator-min-microvolt = <1033310>;
-				regulator-max-microvolt = <2004000>;
-				lltc,fb-voltage-divider = <301000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_ARM (1+R1/R2 = 1.635) */
-			reg_vdd_arm: sw3 {
-				regulator-name = "vddarm";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_DDR (1+R1/R2 = 2.105) */
-			reg_vdd_ddr: sw4 {
-				regulator-name = "vddddr";
-				regulator-min-microvolt = <868310>;
-				regulator-max-microvolt = <1684000>;
-				lltc,fb-voltage-divider = <221000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
-			reg_2p5v: ldo2 {
-				regulator-name = "vdd2p5";
-				regulator-min-microvolt = <2490375>;
-				regulator-max-microvolt = <2490375>;
-				lltc,fb-voltage-divider = <487000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_HIGH (1+R1/R2 = 4.17) */
-			reg_3p0v: ldo4 {
-				regulator-name = "vdd3p0";
-				regulator-min-microvolt = <3023250>;
-				regulator-max-microvolt = <3023250>;
-				lltc,fb-voltage-divider = <634000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	egalax_ts: touchscreen@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	non-removable;
-	vmmc-supply = <&reg_3p3v>;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x4001b0b0 /* PHY_RST# */
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
-			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0 /* PCIE RST */
-		>;
-	};
-
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08	0x1b0b0 /* PMIC_IRQ# */
-		>;
-	};
-
-	pinctrl_pps: ppsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D23__UART3_CTS_B         0x1b0b1
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
-			MX6QDL_PAD_EIM_D31__UART3_RTS_B         0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA    0x1b0b1
-			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA    0x1b0b1
-			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B      0x1b0b1
-			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B      0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
-			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-			MX6QDL_PAD_SD3_RST__SD3_RESET		0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
-			MX6QDL_PAD_SD3_RST__SD3_RESET		0x100b9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
-			MX6QDL_PAD_SD3_RST__SD3_RESET		0x100f9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
deleted file mode 100644
index 988334c889eb..000000000000
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * Copyright (C) 2013,2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include "imx6qdl-microsom.dtsi"
-#include "imx6qdl-microsom-ar8035.dtsi"
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	ir_recv: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		reg_3p3v: 3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usbh1_vbus: usb-h1-vbus {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-
-		reg_usbotg_vbus: usb-otg-vbus {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-	};
-
-	sound-sgtl5000 {
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "On-board Codec";
-		mux-ext-port = <5>;
-		mux-int-port = <1>;
-		ssi-controller = <&ssi1>;
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "On-board SPDIF";
-		/* IMX6 doesn't implement this yet */
-		spdif-controller = <&spdif>;
-		spdif-out;
-	};
-};
-
-&audmux {
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_flexcan1>;
-	status = "okay";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_hdmi>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_i2c1>;
-	status = "okay";
-
-	/* Pro baseboard model */
-	rtc: pcf8523@68 {
-		compatible = "nxp,pcf8523";
-		reg = <0x68>;
-	};
-
-	/* Pro baseboard model */
-	sgtl5000: sgtl5000@0a {
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		compatible = "fsl,sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>;
-		reg = <0x0a>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_i2c2>;
-	status = "okay";
-};
-
-&iomuxc {
-	hummingboard {
-		pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000
-				MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000
-			>;
-		};
-
-		pinctrl_hummingboard_gpio3_5: hummingboard-gpio3_5 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1
-			>;
-		};
-
-		pinctrl_hummingboard_hdmi: hummingboard-hdmi {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
-			>;
-		};
-
-		pinctrl_hummingboard_i2c1: hummingboard-i2c1 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_hummingboard_i2c2: hummingboard-i2c2 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_hummingboard_pcie_reset: hummingboard-pcie-reset {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1
-			>;
-		};
-
-		pinctrl_hummingboard_pwm1: pwm1grp {
-			fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>;
-		};
-
-		pinctrl_hummingboard_sgtl5000: hummingboard-sgtl5000 {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
-				MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
-				MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
-				MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
-				MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
-			>;
-		};
-
-		pinctrl_hummingboard_spdif: hummingboard-spdif {
-			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
-		};
-
-		pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus {
-			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id {
-			/*
-			 * Similar to pinctrl_usbotg_2, but we want it
-			 * pulled down for a fixed host connection.
-			 */
-			fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
-		};
-
-		pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus {
-			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
-			>;
-		};
-
-		pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
-			>;
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_pcie_reset>;
-	reset-gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm1 {
-	 pinctrl-names = "default";
-	 pinctrl-0 = <&pinctrl_hummingboard_pwm1>;
-	 status = "okay";
-};
-
-&pwm2 {
-	 pinctrl-names = "default";
-	 status = "okay";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_spdif>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&usbh1 {
-	disable-over-current;
-	vbus-supply = <&reg_usbh1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	disable-over-current;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
-	vbus-supply = <&reg_usbotg_vbus>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&pinctrl_hummingboard_usdhc2_aux
-		&pinctrl_hummingboard_usdhc2
-	>;
-	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
deleted file mode 100644
index 56d0c5d21cd0..000000000000
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	memory {
-		reg = <0x10000000 0x80000000>;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 100000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	rmii_clk: clock-rmii-clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;  /* 25MHz for example */
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_3p3v>;
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_3p3v>;
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
-	clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>;
-	phy-mode = "rmii";
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b0b1
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b020
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b020
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b020
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpmi-nand {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
-			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
-			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
-			MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB2__I2C2_SCL  0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
-			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x130b0
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17070
-			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10070
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17070
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17070
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17070
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
deleted file mode 100644
index 900e8c781f91..000000000000
--- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Copyright (C) 2013,2014 Russell King
- *
- * This describes the hookup for an AR8035 to the iMX6 on the SolidRun
- * MicroSOM.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
-	phy-mode = "rgmii";
-	phy-reset-duration = <2>;
-	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&iomuxc {
-	enet {
-		pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				/* AR8035 reset */
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x130b0
-				/* AR8035 interrupt */
-				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x80000000
-				/* GPIO16 -> AR8035 25MHz */
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0xc0000000
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x80000000
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
-				/* AR8035 pin strapping: IO voltage: pull up */
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				/* AR8035 pin strapping: PHYADDR#0: pull down */
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
-				/* AR8035 pin strapping: PHYADDR#1: pull down */
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
-				/* AR8035 pin strapping: MODE#1: pull up */
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				/* AR8035 pin strapping: MODE#3: pull up */
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				/* AR8035 pin strapping: MODE#0: pull down */
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
-
-				/*
-				 * As the RMII pins are also connected to RGMII
-				 * so that an AR8030 can be placed, set these
-				 * to high-z with the same pulls as above.
-				 * Use the GPIO settings to avoid changing the
-				 * input select registers.
-				 */
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x03000
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x03000
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x03000
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi
deleted file mode 100644
index 6a410160c9ee..000000000000
--- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * Copyright (C) 2013,2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/gpio/gpio.h>
-/ {
-	clk_sdio: sdio-clock {
-		compatible = "gpio-gate-clock";
-		#clock-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_microsom_brcm_osc>;
-		enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		reg_brcm: brcm-reg {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio3 19 0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_microsom_brcm_reg>;
-			regulator-name = "brcm_reg";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			startup-delay-us = <200000>;
-		};
-	};
-
-	usdhc1_pwrseq: usdhc1_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>,
-			      <&gpio6 0 GPIO_ACTIVE_LOW>;
-		clocks = <&clk_sdio>;
-		clock-names = "ext_clock";
-	};
-};
-
-&iomuxc {
-	microsom {
-		pinctrl_microsom_brcm_bt: microsom-brcm-bt {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x40013070
-				MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01	0x40013070
-				MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40013070
-			>;
-		};
-
-		pinctrl_microsom_brcm_osc: microsom-brcm-osc {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x40013070
-			>;
-		};
-
-		pinctrl_microsom_brcm_reg: microsom-brcm-reg {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x40013070
-			>;
-		};
-
-		pinctrl_microsom_brcm_wifi: microsom-brcm-wifi {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K	0x1b0b0
-				MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x40013070
-				MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x40013070
-				MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x40013070
-			>;
-		};
-
-		pinctrl_microsom_uart1: microsom-uart1 {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_microsom_uart4: microsom-uart4 {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
-			>;
-		};
-
-		pinctrl_microsom_usdhc1: microsom-usdhc1 {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
-				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
-				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
-				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
-				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
-				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_uart1>;
-	status = "okay";
-};
-
-/* UART4 - Connected to optional BRCM Wifi/BT/FM */
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-/* USDHC1 - Connected to optional BRCM Wifi/BT/FM */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_brcm_wifi &pinctrl_microsom_usdhc1>;
-	bus-width = <4>;
-	mmc-pwrseq = <&usdhc1_pwrseq>;
-	keep-power-in-suspend;
-	no-1-8-v;
-	non-removable;
-	vmmc-supply = <&reg_brcm>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
deleted file mode 100644
index 6b81580623ff..000000000000
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ /dev/null
@@ -1,606 +0,0 @@
-/*
- * Copyright 2015 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	memory {
-		reg = <0x10000000 0x20000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_wlan_vmmc: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_wlan_vmmc>;
-			regulator-name = "reg_wlan_vmmc";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>;
-			startup-delay-us = <70000>;
-			enable-active-high;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		home {
-			label = "Home";
-			gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>;
-			linux,code = <102>;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
-			linux,code = <158>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		j14-pin1 {
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-
-		j14-pin3 {
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-
-		j14-pins8-9 {
-			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-
-		j46-pin2 {
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-
-		j46-pin3 {
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-	};
-
-	backlight-lcd {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	backlight_lvds0: backlight-lvds0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	panel-lvds0 {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds0>;
-
-		port {
-			panel_in_lvds0: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6dl-nit6xlite-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6dl-nit6xlite-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		compatible = "microchip,sst25vf016b";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	txen-skew-ps = <0>;
-	txc-skew-ps = <3000>;
-	rxdv-skew-ps = <0>;
-	rxc-skew-ps = <3000>;
-	rxd0-skew-ps = <0>;
-	rxd1-skew-ps = <0>;
-	rxd2-skew-ps = <0>;
-	rxd3-skew-ps = <0>;
-	txd0-skew-ps = <0>;
-	txd1-skew-ps = <0>;
-	txd2-skew-ps = <0>;
-	txd3-skew-ps = <0>;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sgtl5000>;
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	touchscreen@04 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-	};
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-	};
-
-	rtc@6f {
-		compatible = "isil,isl1208";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rtc>;
-		reg = <0x6f>;
-		interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_j10>;
-	pinctrl-1 = <&pinctrl_j28>;
-
-	imx6dl-nit6xlite {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				/* Phy reset */
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio-keysgrp {
-			fsl,pins = <
-				/* Home Button: J14 pin 5 */
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
-				/* Back Button: J14 pin 7 */
-				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
-				/* Touch IRQ: J7 pin 4 */
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
-				/* tcs2004 IRQ */
-				MX6QDL_PAD_EIM_LBA__GPIO2_IO27	0x1b0b0
-				/* tsc2004 reset */
-				MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x0b0b0
-			>;
-		};
-
-		pinctrl_j10: j10grp {
-			fsl,pins = <
-				/* Broadcom WiFi module pins */
-				MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
-				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
-				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x0b0b0
-				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
-				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
-			>;
-		};
-
-		pinctrl_j28: j28grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
-			>;
-		};
-
-		pinctrl_leds: ledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x0b0b0
-				MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x0b0b0
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x030b0
-				MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x0b0b0
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0b0b0
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_wlan_vmmc: wlan-vmmcgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b0
-			>;
-		};
-
-		pinctrl_rtc: rtcgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b0
-			>;
-		};
-
-		pinctrl_sgtl5000: sgtl5000grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
-				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
-			>;
-		};
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in_lvds0>;
-			};
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	non-removable;
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_wlan_vmmc>;
-	vqmmc-1-8-v;
-	ocr-limit = <0x180>;     /* 1.65v - 2.1v */
-	cap-power-off-card;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
deleted file mode 100644
index b63134e3b51a..000000000000
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ /dev/null
@@ -1,869 +0,0 @@
-/*
- * Copyright 2015 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	memory {
-		reg = <0x10000000 0xF0000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_1p8v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "1P8V";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		reg_2p5v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb_h1_vbus: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_wlan_vmmc: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_wlan_vmmc>;
-			regulator-name = "reg_wlan_vmmc";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-			startup-delay-us = <70000>;
-			enable-active-high;
-		};
-
-		reg_can_xcvr: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "CAN XCVR";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_can_xcvr>;
-			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		menu {
-			label = "Menu";
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-		};
-
-		home {
-			label = "Home";
-			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-
-	i2cmux@2 {
-		compatible = "i2c-mux-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c2mux>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		mux-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH
-			     &gpio4 15 GPIO_ACTIVE_HIGH>;
-		i2c-parent = <&i2c2>;
-		idle-state = <0>;
-
-		i2c2@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c2@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	i2cmux@3 {
-		compatible = "i2c-mux-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3mux>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		mux-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
-		i2c-parent = <&i2c3>;
-		idle-state = <0>;
-
-		i2c3@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		speaker-enable {
-			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-
-		ttymxc4-rs232 {
-			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
-			retain-state-suspended;
-			default-state = "on";
-		};
-	};
-
-	backlight_lcd: backlight-lcd {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	backlight_lvds0: backlight-lvds0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	backlight_lvds1: backlight-lvds1 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	lcd_display: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_j15>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel-lcd {
-		compatible = "okaya,rs800480t-7x0gp";
-		backlight = <&backlight_lcd>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	panel-lvds0 {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds0>;
-
-		port {
-			panel_in_lvds0: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	panel-lvds1 {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds1>;
-
-		port {
-			panel_in_lvds1: endpoint {
-				remote-endpoint = <&lvds1_out>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-nitrogen6_max-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-nitrogen6_max-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		compatible = "microchip,sst25vf016b";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	txen-skew-ps = <0>;
-	txc-skew-ps = <3000>;
-	rxdv-skew-ps = <0>;
-	rxc-skew-ps = <3000>;
-	rxd0-skew-ps = <0>;
-	rxd1-skew-ps = <0>;
-	rxd2-skew-ps = <0>;
-	rxd3-skew-ps = <0>;
-	txd0-skew-ps = <0>;
-	txd1-skew-ps = <0>;
-	txd2-skew-ps = <0>;
-	txd3-skew-ps = <0>;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sgtl5000>;
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	rtc: rtc@68 {
-		compatible = "microcrystal,rv4162";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rv4162>;
-		reg = <0x68>;
-		interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	touchscreen@04 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-	};
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-	};
-};
-
-&iomuxc {
-	imx6q-nitrogen6-max {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-			>;
-		};
-
-		pinctrl_can_xcvr: can-xcvrgrp {
-			fsl,pins = <
-				/* Flexcan XCVR enable */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				/* Phy reset */
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio-keysgrp {
-			fsl,pins = <
-				/* Power Button */
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
-				/* Menu Button */
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-				/* Home Button */
-				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
-				/* Back Button */
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
-				/* Volume Up Button */
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
-				/* Volume Down Button */
-				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2mux: i2c2muxgrp {
-			fsl,pins = <
-				/* ov5642 camera i2c enable */
-				MX6QDL_PAD_EIM_D20__GPIO3_IO20	0x000b0
-				/* ov5640_mipi camera i2c enable */
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15	0x000b0
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c3mux: i2c3muxgrp {
-			fsl,pins = <
-				/* PCIe I2C enable */
-				MX6QDL_PAD_EIM_OE__GPIO2_IO25	0x000b0
-			>;
-		};
-
-		pinctrl_j15: j15grp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
-				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
-				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
-				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
-				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
-				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
-				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
-				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
-				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
-				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
-				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
-				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
-				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
-				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
-				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
-				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
-				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
-				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
-				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
-				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
-				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
-				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
-				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
-				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
-				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
-				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				/* PCIe reset */
-				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31	0x000b0
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm2: pwm2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT2__PWM2_OUT	0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT	0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT	0x1b0b1
-			>;
-		};
-
-		pinctrl_rv4162: rv4162grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x1b0b0
-			>;
-		};
-
-		pinctrl_sgtl5000: sgtl5000grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x130b1
-				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x030b1
-				/* RS485 RX Enable: pull up */
-				MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b1
-				/* RS485 DEN: pull down */
-				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b1
-				/* RS485/!RS232 Select: pull down (rs232) */
-				MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x030b1
-				/* ON: pull down */
-				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x030b1
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x0b0b0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x100b0
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_wlan_vmmc: wlan-vmmcgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
-				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x000b0
-				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
-			>;
-		};
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in_lvds0>;
-			};
-		};
-	};
-
-	lvds-channel@1 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds1_out: endpoint {
-				remote-endpoint = <&panel_in_lvds1>;
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	non-removable;
-	vmmc-supply = <&reg_wlan_vmmc>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	non-removable;
-	vmmc-supply = <&reg_1p8v>;
-	keep-power-in-suspend;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
deleted file mode 100644
index f22e5879340b..000000000000
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ /dev/null
@@ -1,678 +0,0 @@
-/*
- * Copyright 2013 Boundary Devices, Inc.
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-
-		reg_can_xcvr: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "CAN XCVR";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_can_xcvr>;
-			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		};
-
-		reg_wlan_vmmc: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_wlan_vmmc>;
-			regulator-name = "reg_wlan_vmmc";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-			startup-delay-us = <70000>;
-			enable-active-high;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		menu {
-			label = "Menu";
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-		};
-
-		home {
-			label = "Home";
-			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-nitrogen6x-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-nitrogen6x-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-
-	backlight_lcd: backlight-lcd {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	backlight_lvds: backlight-lvds {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	lcd_display: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_j15>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel-lcd {
-		compatible = "okaya,rs800480t-7x0gp";
-		backlight = <&backlight_lcd>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	panel-lvds0 {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		compatible = "sst,sst25vf016b", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	txen-skew-ps = <0>;
-	txc-skew-ps = <3000>;
-	rxdv-skew-ps = <0>;
-	rxc-skew-ps = <3000>;
-	rxd0-skew-ps = <0>;
-	rxd1-skew-ps = <0>;
-	rxd2-skew-ps = <0>;
-	rxd3-skew-ps = <0>;
-	txd0-skew-ps = <0>;
-	txd1-skew-ps = <0>;
-	txd2-skew-ps = <0>;
-	txd3-skew-ps = <0>;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	rtc: rtc@6f {
-		compatible = "isil,isl1208";
-		reg = <0x6f>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	touchscreen@04 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-	};
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-nitrogen6x {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* SGTL5000 sys_mclk */
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x030b0
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-			>;
-		};
-
-		pinctrl_can_xcvr: can-xcvrgrp {
-			fsl,pins = <
-				/* Flexcan XCVR enable */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x000b1	/* CS */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				/* Phy reset */
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x000b0
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio-keysgrp {
-			fsl,pins = <
-				/* Power Button */
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
-				/* Menu Button */
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-				/* Home Button */
-				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
-				/* Back Button */
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
-				/* Volume Up Button */
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
-				/* Volume Down Button */
-				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_j15: j15grp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
-				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
-				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
-				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
-				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
-				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
-				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
-				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
-				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
-				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
-				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
-				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
-				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
-				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
-				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
-				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
-				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
-				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
-				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
-				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
-				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
-				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
-				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
-				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
-				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
-				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID	0x17059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC	0x1b0b0
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x000b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17071
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17071
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17071
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17071
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17071
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0	/* CD */
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0	/* CD */
-			>;
-		};
-
-		pinctrl_wlan_vmmc: wlan-vmmcgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
-				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x000b0
-				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
-			>;
-		};
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	non-removable;
-	vmmc-supply = <&reg_wlan_vmmc>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
deleted file mode 100644
index 585b4f6986c1..000000000000
--- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	chosen {
-		linux,stdout-path = &uart4;
-	};
-
-	regulators {
-		sound_1v8: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "i2s-audio-1v8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		sound_3v3: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "i2s-audio-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-	};
-
-	tlv320_mclk: oscillator {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <19200000>;
-		clock-output-names = "tlv320-mclk";
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "OnboardTLV320AIC3007";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink_master>;
-		simple-audio-card,frame-master = <&dailink_master>;
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Line", "Line In",
-			"Line", "Line Out",
-			"Speaker", "Speaker",
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"Line Out", "LLOUT",
-			"Line Out", "RLOUT",
-			"Speaker", "SPOP",
-			"Speaker", "SPOM",
-			"Headphone Jack", "HPLOUT",
-			"Headphone Jack", "HPROUT",
-			"MIC3L", "Mic Jack",
-			"MIC3R", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"LINE1L", "Line In",
-			"LINE1R", "Line In";
-
-		simple-audio-card,cpu {
-			sound-dai = <&ssi2>;
-		};
-
-		dailink_master: simple-audio-card,codec {
-			sound-dai = <&codec>;
-			clocks = <&tlv320_mclk>;
-		};
-	};
-
-};
-
-&audmux {
-	status = "okay";
-
-	ssi2 {
-		fsl,audmux-port = <1>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_TFSDIR |
-			IMX_AUDMUX_V2_PTCR_TFSEL(4) |
-			IMX_AUDMUX_V2_PTCR_TCLKDIR |
-			IMX_AUDMUX_V2_PTCR_TCSEL(4))
-			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
-		>;
-	};
-
-	pins5 {
-		fsl,audmux-port = <4>;
-		fsl,port-config = <
-			0x00000000
-			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
-		>;
-	};
-};
-
-&can1 {
-	status = "okay";
-};
-
-&fec {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-
-	codec: tlv320@18 {
-		compatible = "ti,tlv320aic3007";
-		#sound-dai-cells = <0>;
-		reg = <0x18>;
-		ai3x-micbias-vg = <2>;
-
-		AVDD-supply = <&sound_3v3>;
-		IOVDD-supply = <&sound_3v3>;
-		DRVDD-supply = <&sound_3v3>;
-		DVDD-supply = <&sound_1v8>;
-	};
-
-	stmpe@41 {
-		compatible = "st,stmpe811";
-		reg = <0x41>;
-	};
-
-	rtc@51 {
-		compatible = "nxp,rtc8564";
-		reg = <0x51>;
-	};
-
-	adc@64 {
-		compatible = "maxim,max1037";
-		reg = <0x64>;
-	};
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&pcie {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	status = "okay";
-};
-
-&usdhc2 {
-	status = "okay";
-};
-
-&usdhc3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
deleted file mode 100644
index d81b0078a100..000000000000
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ /dev/null
@@ -1,435 +0,0 @@
-/*
- * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Phytec phyFLEX-i.MX6 Quad";
-	compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
-
-	memory {
-		reg = <0x10000000 0x80000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb_otg_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio4 15 0>;
-			enable-active-high;
-		};
-
-		reg_usb_h1_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 0 0>;
-			enable-active-high;
-		};
-	};
-
-	gpio_leds: leds {
-		compatible = "gpio-leds";
-
-		green {
-			label = "phyflex:green";
-			gpios = <&gpio1 30 0>;
-		};
-
-		red {
-			label = "phyflex:red";
-			gpios = <&gpio2 31 0>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "disabled";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "disabled";
-};
-
-&ecspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	status = "okay";
-	cs-gpios = <&gpio4 24 0>;
-
-	flash@0 {
-		compatible = "m25p80", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	phy-supply = <&vdd_eth_io_reg>;
-	status = "disabled";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c32";
-		reg = <0x50>;
-	};
-
-	pmic@58 {
-		compatible = "dlg,da9063";
-		reg = <0x58>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <9 0x8>; /* active-low GPIO2_9 */
-
-		regulators {
-			vddcore_reg: bcore1 {
-				regulator-min-microvolt = <730000>;
-				regulator-max-microvolt = <1380000>;
-				regulator-always-on;
-			};
-
-			vddsoc_reg: bcore2 {
-				regulator-min-microvolt = <730000>;
-				regulator-max-microvolt = <1380000>;
-				regulator-always-on;
-			};
-
-			vdd_ddr3_reg: bpro {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-			};
-
-			vdd_3v3_reg: bperi {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_buckmem_reg: bmem {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_eth_reg: bio {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			vdd_eth_io_reg: ldo4 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-
-			vdd_mx6_snvs_reg: ldo5 {
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			vdd_3v3_pmic_io_reg: ldo6 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_sd0_reg: ldo9 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vdd_sd1_reg: ldo10 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vdd_mx6_high_reg: ldo11 {
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <100000>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	clock-frequency = <100000>;
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-phytec-pfla02 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
-				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
-				MX6QDL_PAD_SD4_DAT1__GPIO2_IO09  0x80000000 /* PMIC interrupt */
-				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */
-				MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */
-			>;
-		};
-
-		pinctrl_ecspi3: ecspi3grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
-			>;
-		};
-
-		pinctrl_flexcan1: flexcan1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-			>;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17  0x80000000>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D30__UART3_RTS_B		0x1b0b1
-				MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b0b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__USB_H1_PWR		0x80000000
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x80000000
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3_cdwp: usdhc3cdwp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT16__AUD5_TXC	0x130b0
-				MX6QDL_PAD_DISP0_DAT17__AUD5_TXD	0x110b0
-				MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS	0x130b0
-				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
-			>;
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio4 17 GPIO_ACTIVE_LOW>;
-	status = "disabled";
-};
-
-&reg_arm {
-	vin-supply = <&vddcore_reg>;
-};
-
-&reg_pu {
-	vin-supply = <&vddsoc_reg>;
-};
-
-&reg_soc {
-	vin-supply = <&vddsoc_reg>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "disabled";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "disabled";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	status = "disabled";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "disabled";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	status = "disabled";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3
-		     &pinctrl_usdhc3_cdwp>;
-	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
deleted file mode 100644
index 5cf90c24c707..000000000000
--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ /dev/null
@@ -1,352 +0,0 @@
-/*
- * Copyright 2014 FEDEVEL, Inc.
- *
- * Author: Robert Nelson <robertcnelson@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usbh1_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			pinctrl-names = "default";
-			regulator-name = "usbh1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			pinctrl-names = "default";
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		led0: usr {
-			label = "usr";
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6-rex-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6-rex-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-};
-
-&ecspi3 {
-	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	eeprom@57 {
-		compatible = "at,24c02";
-		reg = <0x57>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-rex {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* SGTL5000 sys_mclk */
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x030b0
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_ecspi2: ecspi2grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-				/* CS */
-				MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x000b1
-			>;
-		};
-
-		pinctrl_ecspi3: ecspi3grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x100b1
-				/* CS */
-				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000b1
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-				/* Phy reset */
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_led: ledgrp {
-			fsl,pins = <
-				/* user led */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x10b0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x10b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				/* CD */
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
-				/* WP */
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1f0b0
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				/* CD */
-				MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
-				/* WP */
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1f0b0
-			>;
-		};
-	};
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usbh1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
deleted file mode 100644
index 6a7594e5d183..000000000000
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ /dev/null
@@ -1,716 +0,0 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	memory {
-		reg = <0x10000000 0x80000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		user {
-			label = "debug";
-			gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	clocks {
-		codec_osc: anaclk2 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24576000>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_audio: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "cs42888_supply";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_h1_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	sound-cs42888 {
-		compatible = "fsl,imx6-sabreauto-cs42888",
-			"fsl,imx-audio-cs42888";
-		model = "imx-cs42888";
-		audio-cpu = <&esai>;
-		audio-asrc = <&asrc>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"Line Out Jack", "AOUT1L",
-			"Line Out Jack", "AOUT1R",
-			"Line Out Jack", "AOUT2L",
-			"Line Out Jack", "AOUT2R",
-			"Line Out Jack", "AOUT3L",
-			"Line Out Jack", "AOUT3R",
-			"Line Out Jack", "AOUT4L",
-			"Line Out Jack", "AOUT4R",
-			"AIN1L", "Line In Jack",
-			"AIN1R", "Line In Jack",
-			"AIN2L", "Line In Jack",
-			"AIN2R", "Line In Jack";
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif",
-			   "fsl,imx-sabreauto-spdif";
-		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-in;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		status = "okay";
-	};
-
-	i2cmux {
-		compatible = "i2c-mux-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3mux>;
-		mux-gpios = <&gpio5 4 0>;
-		i2c-parent = <&i2c3>;
-		idle-state = <0>;
-
-		i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			adv7180: camera@21 {
-				compatible = "adi,adv7180";
-				reg = <0x21>;
-				powerdown-gpios = <&max7310_b 2 GPIO_ACTIVE_LOW>;
-				interrupt-parent = <&gpio1>;
-				interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
-
-				port {
-					adv7180_to_ipu1_csi0_mux: endpoint {
-						remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-						bus-width = <8>;
-					};
-				};
-			};
-
-			max7310_a: gpio@30 {
-				compatible = "maxim,max7310";
-				reg = <0x30>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			max7310_b: gpio@32 {
-				compatible = "maxim,max7310";
-				reg = <0x32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_max7310>;
-				reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-			};
-
-			max7310_c: gpio@34 {
-				compatible = "maxim,max7310";
-				reg = <0x34>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-		};
-	};
-};
-
-&ipu1_csi0_from_ipu1_csi0_mux {
-	bus-width = <8>;
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
-	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
-	bus-width = <8>;
-};
-
-&ipu1_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
-			  <&clks IMX6QDL_PLL4_BYPASS>,
-			  <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
-			  <&clks IMX6QDL_CLK_PLL4_POST_DIV>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
-				 <&clks IMX6QDL_PLL4_BYPASS_SRC>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-	assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
-	status = "disabled"; /* pin conflict with WEIM NOR */
-
-	flash: m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p32", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&esai {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esai>;
-	assigned-clocks = <&clks IMX6QDL_CLK_ESAI_SEL>,
-			  <&clks IMX6QDL_CLK_ESAI_EXTAL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
-	assigned-clock-rates = <0>, <24576000>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pmic: pfuze100@08 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	codec: cs42888@48 {
-		compatible = "cirrus,cs42888";
-		reg = <0x48>;
-		clocks = <&codec_osc>;
-		clock-names = "mclk";
-		VA-supply = <&reg_audio>;
-		VD-supply = <&reg_audio>;
-		VLS-supply = <&reg_audio>;
-		VLC-supply = <&reg_audio>;
-	};
-
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-sabreauto {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
-				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
-				MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-			>;
-		};
-
-		pinctrl_ecspi1_cs: ecspi1cs {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_esai: esaigrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
-				MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS    0x1b030
-				MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
-				MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3     0x1b030
-				MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1  0x1b030
-				MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0   0x1b030
-				MX6QDL_PAD_GPIO_17__ESAI_TX0        0x1b030
-				MX6QDL_PAD_NANDF_CS3__ESAI_TX1      0x1b030
-				MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK   0x1b030
-				MX6QDL_PAD_GPIO_9__ESAI_RX_FS       0x1b030
-			>;
-		};
-
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x80000000
-			>;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL  0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3mux: i2c3muxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x0b0b1
-			>;
-		};
-
-		pinctrl_ipu1_csi0: ipu1csi0grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0x1b0b0
-				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
-				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0x1b0b0
-				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0x1b0b0
-			>;
-		};
-
-		pinctrl_max7310: max7310grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0
-			>;
-		};
-
-		pinctrl_pwm3: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_gpt_input_capture0: gptinputcapture0grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1	0x1b0b0
-			>;
-		};
-
-		pinctrl_gpt_input_capture1: gptinputcapture1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2	0x1b0b0
-			>;
-		};
-
-		pinctrl_spdif: spdifgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
-			>;
-		};
-
-		pinctrl_weim_cs0: weimcs0grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
-			>;
-		};
-
-		pinctrl_weim_nor: weimnorgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
-				MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
-				MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B		0xb060
-				MX6QDL_PAD_EIM_D16__EIM_DATA16		0x1b0b0
-				MX6QDL_PAD_EIM_D17__EIM_DATA17		0x1b0b0
-				MX6QDL_PAD_EIM_D18__EIM_DATA18		0x1b0b0
-				MX6QDL_PAD_EIM_D19__EIM_DATA19		0x1b0b0
-				MX6QDL_PAD_EIM_D20__EIM_DATA20		0x1b0b0
-				MX6QDL_PAD_EIM_D21__EIM_DATA21		0x1b0b0
-				MX6QDL_PAD_EIM_D22__EIM_DATA22		0x1b0b0
-				MX6QDL_PAD_EIM_D23__EIM_DATA23		0x1b0b0
-				MX6QDL_PAD_EIM_D24__EIM_DATA24		0x1b0b0
-				MX6QDL_PAD_EIM_D25__EIM_DATA25		0x1b0b0
-				MX6QDL_PAD_EIM_D26__EIM_DATA26		0x1b0b0
-				MX6QDL_PAD_EIM_D27__EIM_DATA27		0x1b0b0
-				MX6QDL_PAD_EIM_D28__EIM_DATA28		0x1b0b0
-				MX6QDL_PAD_EIM_D29__EIM_DATA29		0x1b0b0
-				MX6QDL_PAD_EIM_D30__EIM_DATA30		0x1b0b0
-				MX6QDL_PAD_EIM_D31__EIM_DATA31		0x1b0b0
-				MX6QDL_PAD_EIM_A23__EIM_ADDR23		0xb0b1
-				MX6QDL_PAD_EIM_A22__EIM_ADDR22		0xb0b1
-				MX6QDL_PAD_EIM_A21__EIM_ADDR21		0xb0b1
-				MX6QDL_PAD_EIM_A20__EIM_ADDR20		0xb0b1
-				MX6QDL_PAD_EIM_A19__EIM_ADDR19		0xb0b1
-				MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0b1
-				MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0b1
-				MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0b1
-				MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
-				MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
-				MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
-				MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
-				MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
-				MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
-				MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
-				MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
-				MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
-				MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
-				MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
-				MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
-				MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
-				MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
-				MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
-				MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
-			>;
-		};
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
-	};
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&weim {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
-	ranges = <0 0 0x08000000 0x08000000>;
-	status = "disabled"; /* pin conflict with SPI NOR */
-
-	nor@0,0 {
-		compatible = "cfi-flash";
-		reg = <0 0 0x02000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		bank-width = <2>;
-		fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
-				0x0000c000 0x1404a38e 0x00000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
deleted file mode 100644
index afe7449c47da..000000000000
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ /dev/null
@@ -1,748 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/clock/imx6qdl-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-
-		reg_can_xcvr: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "CAN XCVR";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_can_xcvr>;
-			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		};
-
-		reg_1p5v: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "1P5V";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-always-on;
-		};
-
-		reg_1p8v: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "1P8V";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		reg_2p8v: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "2P8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			regulator-always-on;
-		};
-	};
-
-	mipi_xclk: mipi_xclk {
-		compatible = "pwm-clock";
-		#clock-cells = <0>;
-		clock-frequency = <22000000>;
-		clock-output-names = "mipi_pwm3";
-		pwms = <&pwm3 0 45>; /* 1 / 45 ns = 22 MHz */
-		status = "okay";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		menu {
-			label = "Menu";
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-		};
-
-		home {
-			label = "Home";
-			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-sabrelite-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-sabrelite-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-
-	backlight_lcd: backlight-lcd {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	backlight_lvds: backlight-lvds {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	lcd_display: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_j15>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel-lcd {
-		compatible = "okaya,rs800480t-7x0gp";
-		backlight = <&backlight_lcd>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	panel-lvds0 {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&ipu1_csi0_from_ipu1_csi0_mux {
-	bus-width = <8>;
-	data-shift = <12>; /* Lines 19:12 used */
-	hsync-active = <1>;
-	vync-active = <1>;
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
-	remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
-};
-
-&ipu1_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		compatible = "sst,sst25vf016b", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	txen-skew-ps = <0>;
-	txc-skew-ps = <3000>;
-	rxdv-skew-ps = <0>;
-	rxc-skew-ps = <3000>;
-	rxd0-skew-ps = <0>;
-	rxd1-skew-ps = <0>;
-	rxd2-skew-ps = <0>;
-	rxd3-skew-ps = <0>;
-	txd0-skew-ps = <0>;
-	txd1-skew-ps = <0>;
-	txd2-skew-ps = <0>;
-	txd3-skew-ps = <0>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	ov5640: camera@40 {
-		compatible = "ovti,ov5640";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5640>;
-		reg = <0x40>;
-		clocks = <&mipi_xclk>;
-		clock-names = "xclk";
-		DOVDD-supply = <&reg_1p8v>;
-		AVDD-supply = <&reg_2p8v>;
-		DVDD-supply = <&reg_1p5v>;
-		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* NANDF_D5 */
-		powerdown-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* NANDF_WP_B */
-
-		port {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ov5640_to_mipi_csi2: endpoint {
-				remote-endpoint = <&mipi_csi2_in>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-			};
-		};
-	};
-
-	ov5642: camera@42 {
-		compatible = "ovti,ov5642";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5642>;
-		clocks = <&clks IMX6QDL_CLK_CKO2>;
-		clock-names = "xclk";
-		reg = <0x42>;
-		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-		powerdown-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		gp-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
-		status = "disabled";
-
-		port {
-			ov5642_to_ipu1_csi0_mux: endpoint {
-				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-				bus-width = <8>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-sabrelite {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* SGTL5000 sys_mclk */
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x030b0
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
-				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
-				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
-				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-			>;
-		};
-
-		pinctrl_can_xcvr: can-xcvrgrp {
-			fsl,pins = <
-				/* Flexcan XCVR enable */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x000b1	/* CS */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				/* Phy reset */
-				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x000b0
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio-keysgrp {
-			fsl,pins = <
-				/* Power Button */
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
-				/* Menu Button */
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-				/* Home Button */
-				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
-				/* Back Button */
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
-				/* Volume Up Button */
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
-				/* Volume Down Button */
-				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_ipu1_csi0: ipu1csi0grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
-				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
-				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
-				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
-				MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x1b0b0
-			>;
-		};
-
-		pinctrl_j15: j15grp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
-				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
-				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
-				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
-				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
-				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
-				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
-				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
-				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
-				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
-				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
-				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
-				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
-				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
-				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
-				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
-				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
-				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
-				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
-				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
-				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
-				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
-				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
-				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
-				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
-				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
-			>;
-		};
-
-		pinctrl_ov5640: ov5640grp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_D5__GPIO2_IO05   0x000b0
-				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0
-			>;
-		};
-
-		pinctrl_ov5642: ov5642grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
-				MX6QDL_PAD_GPIO_6__GPIO1_IO06   0x1b0b0
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08   0x130b0
-				MX6QDL_PAD_GPIO_3__CCM_CLKO2    0x000b0
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC	0x1b0b0
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x000b0
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0	/* CD */
-				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0	/* WP */
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0	/* CD */
-			>;
-		};
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&mipi_csi {
-	status = "okay";
-
-	port@0 {
-		reg = <0>;
-
-		mipi_csi2_in: endpoint {
-			remote-endpoint = <&ov5640_to_mipi_csi2>;
-			clock-lanes = <0>;
-			data-lanes = <1 2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
deleted file mode 100644
index b72b6fa47580..000000000000
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ /dev/null
@@ -1,738 +0,0 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <dt-bindings/clock/imx6qdl-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb_otg_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-			vin-supply = <&swbst_reg>;
-		};
-
-		reg_usb_h1_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 29 0>;
-			enable-active-high;
-			vin-supply = <&swbst_reg>;
-		};
-
-		reg_audio: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "wm8962-supply";
-			gpio = <&gpio4 10 0>;
-			enable-active-high;
-		};
-
-		reg_pcie: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_pcie_reg>;
-			regulator-name = "MPCIE_3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 19 0>;
-			regulator-always-on;
-			enable-active-high;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-			linux,code = <KEY_POWER>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-sabresd-wm8962",
-			   "fsl,imx-audio-wm8962";
-		model = "wm8962-audio";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"Ext Spk", "SPKOUTL",
-			"Ext Spk", "SPKOUTR",
-			"AMIC", "MICBIAS",
-			"IN3R", "AMIC";
-		mux-int-port = <2>;
-		mux-ext-port = <3>;
-	};
-
-	backlight_lvds: backlight-lvds {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		status = "okay";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		red {
-			gpios = <&gpio1 2 0>;
-			default-state = "on";
-		};
-	};
-
-	panel {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&ipu1_csi0_from_ipu1_csi0_mux {
-	bus-width = <8>;
-	data-shift = <12>; /* Lines 19:12 used */
-	hsync-active = <1>;
-	vsync-active = <1>;
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
-	remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
-};
-
-&ipu1_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-};
-
-&mipi_csi {
-	status = "okay";
-
-	port@0 {
-		reg = <0>;
-
-		mipi_csi2_in: endpoint {
-			remote-endpoint = <&ov5640_to_mipi_csi2>;
-			clock-lanes = <0>;
-			data-lanes = <1 2>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio4 9 0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p32", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: wm8962@1a {
-		compatible = "wlf,wm8962";
-		reg = <0x1a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		DCVDD-supply = <&reg_audio>;
-		DBVDD-supply = <&reg_audio>;
-		AVDD-supply = <&reg_audio>;
-		CPVDD-supply = <&reg_audio>;
-		MICVDD-supply = <&reg_audio>;
-		PLLVDD-supply = <&reg_audio>;
-		SPKVDD1-supply = <&reg_audio>;
-		SPKVDD2-supply = <&reg_audio>;
-		gpio-cfg = <
-			0x0000 /* 0:Default */
-			0x0000 /* 1:Default */
-			0x0013 /* 2:FN_DMICCLK */
-			0x0000 /* 3:Default */
-			0x8014 /* 4:FN_DMICCDAT */
-			0x0000 /* 5:Default */
-		>;
-	};
-
-	ov5642: camera@3c {
-		compatible = "ovti,ov5642";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5642>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		clock-names = "xclk";
-		reg = <0x3c>;
-		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
-		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
-						rev B board is VGEN5 */
-		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
-		powerdown-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-		status = "disabled";
-
-		port {
-			ov5642_to_ipu1_csi0_mux: endpoint {
-				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-				bus-width = <8>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	ov5640: camera@3c {
-		compatible = "ovti,ov5640";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5640>;
-		reg = <0x3c>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		clock-names = "xclk";
-		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
-		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
-						rev B board is VGEN5 */
-		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
-		powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-
-		port {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ov5640_to_mipi_csi2: endpoint {
-				remote-endpoint = <&mipi_csi2_in>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-			};
-		};
-	};
-
-	pmic: pfuze100@08 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	egalax_ts@04 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <7 2>;
-		wakeup-gpios = <&gpio6 7 0>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-sabresd {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
-				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1b0b0
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
-				MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
-				MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
-				MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio_keysgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x1b0b0
-				MX6QDL_PAD_GPIO_5__GPIO1_IO05  0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_ipu1_csi0: ipu1csi0grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
-				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
-				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
-				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
-			>;
-		};
-
-		pinctrl_ov5640: ov5640grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0
-				MX6QDL_PAD_SD1_CLK__GPIO1_IO20  0x1b0b0
-			>;
-		};
-
-		pinctrl_ov5642: ov5642grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
-				MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
-			>;
-		};
-
-		pinctrl_pcie_reg: pciereggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x1b0b0
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
-				MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
-				MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
-				MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_wdog: wdoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__WDOG2_B		0x1b0b0
-			>;
-		};
-	};
-
-	gpio_leds {
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
-			>;
-		};
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@1 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&reg_arm {
-       vin-supply = <&sw1a_reg>;
-};
-
-&reg_pu {
-       vin-supply = <&sw1c_reg>;
-};
-
-&reg_soc {
-       vin-supply = <&sw1c_reg>;
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <8>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	non-removable;
-	no-1-8-v;
-	status = "okay";
-};
-
-&wdog1 {
-	status = "disabled";
-};
-
-&wdog2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
deleted file mode 100644
index c96c91d83678..000000000000
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-/ {
-	aliases {
-		backlight = &backlight;
-		panelchan = &panelchan;
-		panel7 = &panel7;
-		touchscreenp7 = &touchscreenp7;
-	};
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	backlight: backlight {
-		compatible = "gpio-backlight";
-		gpios = <&gpio1 4 0>;
-		default-on;
-		status = "disabled";
-	};
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	panel7: panel7 {
-		/*
-		 * in reality it is a -20t (parallel) model,
-		 * but with LVDS bridge chip attached,
-		 * so it is equivalent to -19t model in drive
-		 * characteristics
-		 */
-		compatible = "urt,umsh-8596md-19t";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_panel>;
-		power-supply = <&reg_panel>;
-		backlight = <&backlight>;
-		status = "disabled";
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb_h1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
-			gpio = <&gpio7 12 0>;
-		};
-
-		reg_panel: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "lcd_panel";
-			enable-active-high;
-			gpio = <&gpio1 2 0>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-udoo-ac97",
-			     "fsl,imx-audio-ac97";
-		model = "fsl,imx6q-udoo-ac97";
-		audio-cpu = <&ssi1>;
-		audio-routing =
-			"RX", "Mic Jack",
-			"Headphone Jack", "TX";
-		mux-int-port = <1>;
-		mux-ext-port = <6>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	touchscreenp7: touchscreenp7@55 {
-		compatible = "sitronix,st1232";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touchscreenp7>;
-		reg = <0x55>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <13 8>;
-		gpios = <&gpio1 15 0>;
-		status = "disabled";
-	};
-};
-
-&iomuxc {
-	imx6q-udoo {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001f8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001f8b1
-			>;
-		};
-
-		pinctrl_panel: panelgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x70
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x70
-			>;
-		};
-
-		pinctrl_touchscreenp7: touchscreenp7grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_DAT0__GPIO1_IO15		0x70
-				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbh: usbhgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
-				MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_ac97_running: ac97running {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x1b0b0
-				MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x1b0b0
-				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x1b0b0
-				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x1b0b0
-				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
-			>;
-		};
-
-		pinctrl_ac97_warm_reset: ac97warmreset {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x1b0b0
-				MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b0
-				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x1b0b0
-				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x1b0b0
-				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
-			>;
-		};
-
-		pinctrl_ac97_reset: ac97reset {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
-				MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b0
-				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x1b0b0
-				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x1b0b0
-				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
-			>;
-		};
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	panelchan: lvds-channel@0 {
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh>;
-	vbus-supply = <&reg_usb_h1_vbus>;
-	clocks = <&clks IMX6QDL_CLK_CKO>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	non-removable;
-	status = "okay";
-};
-
-&audmux {
-	status = "okay";
-};
-
-&ssi1 {
-	cell-index = <0>;
-	fsl,mode = "ac97-slave";
-	pinctrl-names = "ac97-running", "ac97-reset", "ac97-warm-reset";
-	pinctrl-0 = <&pinctrl_ac97_running>;
-	pinctrl-1 = <&pinctrl_ac97_reset>;
-	pinctrl-2 = <&pinctrl_ac97_warm_reset>;
-	ac97-gpios = <&gpio4 19 0 &gpio4 18 0 &gpio2 30 0>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
deleted file mode 100644
index a32089132263..000000000000
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include "imx6qdl-wandboard.dtsi"
-
-&iomuxc {
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-wandboard {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0		/* GPIO_0_CLKO */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* uSDHC1 CD */
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
-				MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x0f0b0		/* WL_REF_ON */
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x0f0b0		/* WL_RST_N */
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x000b0		/* WL_REG_ON */
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x80000000	/* WL_HOST_WAKE */
-				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000	/* WL_WAKE */
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x80000000	/* RGMII_nRST */
-				MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x80000000	/* BT_ON */
-				MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x80000000	/* BT_WAKE */
-				MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x80000000	/* BT_HOST_WAKE */
-			>;
-		};
-	};
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	non-removable;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi
deleted file mode 100644
index 8d893a78cdf0..000000000000
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include "imx6qdl-wandboard.dtsi"
-
-&iomuxc {
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-wandboard {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0		/* GPIO_0_CLKO */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* uSDHC1 CD */
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
-				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x0f0b0		/* WIFI_ON (reset, active low) */
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x000b0		/* WL_REG_ON (unused) */
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x80000000	/* WL_HOST_WAKE, input */
-				MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x0f0b0		/* GPIO5_IO31 (Wifi Power Enable) */
-				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000	/* WL_WAKE (unused) */
-				MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x80000000	/* BT_ON */
-				MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x80000000	/* BT_WAKE */
-				MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x80000000	/* BT_HOST_WAKE */
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x80000000	/* RGMII_nRST */
-			>;
-		};
-	};
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
deleted file mode 100644
index b4fa7f1d63da..000000000000
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6-wandboard-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6-wandboard-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-out;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c1>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-		lrclk-strength = <3>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-
-	imx6qdl-wandboard {
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_spdif: spdifgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RXD0__SPDIF_OUT		0x1b0b0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
-				MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			>;
-		};
-
-		pinctrl_usdhc1: usdhc1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
-				MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
-				MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
-				MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
-				MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
-				MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
deleted file mode 100644
index 5d94b5ee6aa0..000000000000
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ /dev/null
@@ -1,932 +0,0 @@
-/*
- * Copyright (C) 2016-2017 Zodiac Inflight Innovations
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	aliases {
-		mdio-gpio0 = &mdio1;
-	};
-
-	mdio1: mdio {
-		compatible = "virtual,mdio-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mdio1>;
-		gpios = <&gpio6 5 GPIO_ACTIVE_HIGH
-		         &gpio6 4 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_28p0v: regulator-28p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "28V_IN";
-		regulator-min-microvolt = <28000000>;
-		regulator-max-microvolt = <28000000>;
-		regulator-always-on;
-	};
-
-	reg_12p0v: regulator-12p0v {
-		compatible = "regulator-fixed";
-		vin-supply = <&reg_28p0v>;
-		regulator-name = "12V_MAIN";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
-	};
-
-	reg_5p0v_main: regulator-5p0v-main {
-		compatible = "regulator-fixed";
-		vin-supply = <&reg_12p0v>;
-		regulator-name = "5V_MAIN";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_5p0v_user_usb: regulator-5p0v-user-usb {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_user_usb>;
-		vin-supply = <&reg_5p0v_main>;
-		regulator-name = "5V_USER_USB";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
-		startup-delay-us = <1000>;
-	};
-
-	reg_3p3v_pmic: regulator-3p3v-pmic {
-		compatible = "regulator-fixed";
-		vin-supply = <&reg_12p0v>;
-		regulator-name = "PMIC_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		vin-supply = <&reg_3p3v_pmic>;
-		regulator-name = "GEN_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v_sd: regulator-3p3v-sd {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_3p3v_sd>;
-		vin-supply = <&reg_3p3v>;
-		regulator-name = "3V3_SD";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <1000>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	reg_3p3v_display: regulator-3p3v-display {
-		compatible = "regulator-fixed";
-		vin-supply = <&reg_12p0v>;
-		regulator-name = "3V3_DISPLAY";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v_ssd: regulator-3p3v-ssd {
-		compatible = "regulator-fixed";
-		vin-supply = <&reg_12p0v>;
-		regulator-name = "3V3_SSD";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	sound1 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "Front";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sound1_codec>;
-		simple-audio-card,frame-master = <&sound1_codec>;
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"Headphone Jack", "HPLEFT",
-			"Headphone Jack", "HPRIGHT",
-			"LEFTIN", "HPL",
-			"RIGHTIN", "HPR";
-		simple-audio-card,aux-devs = <&hpa1>;
-
-		sound1_cpu: simple-audio-card,cpu {
-			sound-dai = <&ssi2>;
-		};
-
-		sound1_codec: simple-audio-card,codec {
-			sound-dai = <&codec1>;
-			clocks = <&cs2000>;
-		};
-	};
-
-	sound2 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "Back";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sound2_codec>;
-		simple-audio-card,frame-master = <&sound2_codec>;
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"Headphone Jack", "HPLEFT",
-			"Headphone Jack", "HPRIGHT",
-			"LEFTIN", "HPL",
-			"RIGHTIN", "HPR";
-		simple-audio-card,aux-devs = <&hpa2>;
-
-		sound2_cpu: simple-audio-card,cpu {
-			sound-dai = <&ssi1>;
-		};
-
-		sound2_codec: simple-audio-card,codec {
-			sound-dai = <&codec2>;
-			clocks = <&cs2000>;
-		};
-	};
-
-	panel {
-		power-supply = <&reg_3p3v_display>;
-		status = "disabled";
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	disp0: disp0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,imx-parallel-display";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0>;
-		status = "disabled";
-
-		port@0 {
-			reg = <0>;
-
-			disp0_in_0: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			disp0_out: endpoint {
-				remote-endpoint = <&tc358767_in>;
-			};
-		};
-	};
-
-	cs2000_ref: cs2000-ref {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-
-	cs2000_in_dummy: cs2000-in-dummy {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	edp_refclk: edp-refclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <19200000>;
-	};
-};
-
-&reg_arm {
-	vin-supply = <&sw1a_reg>;
-};
-
-&reg_pu {
-	vin-supply = <&sw1c_reg>;
-};
-
-&reg_soc {
-	vin-supply = <&sw1c_reg>;
-};
-
-&ldb {
-	lvds-channel@0 {
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	linux,rs485-enabled-at-boot-time;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "st,m25p128", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	codec2: codec@18 {
-		compatible = "ti,tlv320dac3100";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_codec2>;
-		reg = <0x18>;
-		#sound-dai-cells = <0>;
-		HPVDD-supply = <&reg_3p3v>;
-		SPRVDD-supply = <&reg_3p3v>;
-		SPLVDD-supply = <&reg_3p3v>;
-		AVDD-supply = <&reg_3p3v>;
-		IOVDD-supply = <&reg_3p3v>;
-		DVDD-supply = <&vgen4_reg>;
-		gpio-reset = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	};
-
-	accel@1c {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_accel>;
-		compatible = "fsl,mma8451";
-		reg = <0x1c>;
-		interrupt-parent = <&gpio1>;
-		interrupt-names = "int1", "int2";
-		interrupts = <18 IRQ_TYPE_LEVEL_LOW>, <20 IRQ_TYPE_LEVEL_LOW>;
-	};
-
-	hpa2: amp@60 {
-		compatible = "ti,tpa6130a2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tpa2>;
-		reg = <0x60>;
-		power-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		Vdd-supply = <&reg_5p0v_main>;
-	};
-
-	edp-bridge@68 {
-		compatible = "toshiba,tc358767";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tc358767>;
-		reg = <0x68>;
-		shutdown-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		clock-names = "ref";
-		clocks = <&edp_refclk>;
-		status = "disabled";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-
-				tc358767_in: endpoint {
-					remote-endpoint = <&disp0_out>;
-				};
-			};
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	pmic@08 {
-		compatible = "fsl,pfuze100";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pfuze100_irq>;
-		reg = <0x08>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	temp-sense@48 {
-		compatible = "national,lm75";
-		reg = <0x48>;
-	};
-
-	cs2000: clkgen@4e {
-		compatible = "cirrus,cs2000-cp";
-		reg = <0x4e>;
-		#clock-cells = <0>;
-		clock-names = "clk_in", "ref_clk";
-		clocks = <&cs2000_in_dummy>, <&cs2000_ref>;
-		assigned-clocks = <&cs2000>;
-		assigned-clock-rates = <24000000>;
-	};
-
-	eeprom@54 {
-		compatible = "at,24c128";
-		reg = <0x54>;
-	};
-
-	rtc@68 {
-		compatible = "dallas,ds1341";
-		reg = <0x68>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	codec1: codec@18 {
-		compatible = "ti,tlv320dac3100";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_codec1>;
-		reg = <0x18>;
-		#sound-dai-cells = <0>;
-		HPVDD-supply = <&reg_3p3v>;
-		SPRVDD-supply = <&reg_3p3v>;
-		SPLVDD-supply = <&reg_3p3v>;
-		AVDD-supply = <&reg_3p3v>;
-		IOVDD-supply = <&reg_3p3v>;
-		DVDD-supply = <&vgen4_reg>;
-		gpio-reset = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-	};
-
-	touchscreen@20 {
-		compatible = "syna,rmi4-i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ts>;
-		reg = <0x20>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		vdd-supply = <&reg_5p0v_main>;
-		vio-supply = <&reg_3p3v>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rmi4-f01@1 {
-			reg = <0x1>;
-			syna,nosleep-mode = <1>;
-		};
-
-		rmi4-f11@11 {
-			reg = <0x11>;
-			touchscreen-inverted-y;
-			touchscreen-swapped-x-y;
-			syna,sensor-type = <1>;
-		};
-
-		rmi4-f12@12 {
-			reg = <0x12>;
-			touchscreen-inverted-y;
-			touchscreen-swapped-x-y;
-			syna,sensor-type = <1>;
-		};
-	};
-
-	hpa1: amp@60 {
-		compatible = "ti,tpa6130a2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tpa1>;
-		reg = <0x60>;
-		power-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-		Vdd-supply = <&reg_5p0v_main>;
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&disp0_in_0>;
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v_sd>;
-	vqmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v_sd>;
-	vqmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_3p3v>;
-	non-removable;
-	status = "okay";
-};
-
-&sata {
-	target-supply = <&reg_3p3v_ssd>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <100>;
-	phy-supply = <&reg_3p3v>;
-	status = "okay";
-
-	fixed-link {
-		speed = <100>;
-		full-duplex;
-	};
-};
-
-&usbh1 {
-	vbus-supply = <&reg_5p0v_main>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_5p0v_user_usb>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-
-	ssi1 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_SYN |
-			 IMX_AUDMUX_V2_PTCR_TFSEL(2) |
-			 IMX_AUDMUX_V2_PTCR_TCSEL(2) |
-			 IMX_AUDMUX_V2_PTCR_TFSDIR |
-			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
-			IMX_AUDMUX_V2_PDCR_RXDSEL(2)
-		>;
-	};
-
-	aud3 {
-		fsl,audmux-port = <2>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
-		>;
-	};
-
-	ssi2 {
-		fsl,audmux-port = <1>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_SYN |
-			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
-			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
-			 IMX_AUDMUX_V2_PTCR_TFSDIR |
-			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
-			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
-		>;
-	};
-
-	aud5 {
-		fsl,audmux-port = <4>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
-		>;
-	};
-};
-
-&iomuxc {
-	pinctrl_accel: accelgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__GPIO1_IO18		0x4001b000
-			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x4001b000
-		>;
-	};
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0
-			MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x130b0
-			MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x130b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-		>;
-	};
-
-	pinctrl_codec1: dac1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x40000038
-		>;
-	};
-
-	pinctrl_codec2: dac2grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x40000038
-		>;
-	};
-
-	pinctrl_disp0: disp0grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100f9
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x100f9
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x100f9
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x100f9
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x100f9
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x100f9
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x100f9
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x100f9
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x100f9
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x100f9
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x100f9
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x100f9
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x100f9
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x100f9
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x100f9
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x100f9
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x100f9
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x100f9
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x100f9
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x100f9
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x100f9
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x100f9
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x100f9
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x100f9
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x100f9
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x100f9
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x100f9
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x100f9
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b1
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x000b1
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b1
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x100f5
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x100f5
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x100c0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x100c0
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x100f5
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x100f5
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x40010040
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x100b0
-			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_mdio1: bitbangmdiogrp {
-		fsl,pins = <
-			/* Bitbang MDIO for DEB Switch */
-			MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05	0x4001b030
-			MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40018830
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x10038
-		>;
-	};
-
-	pinctrl_pfuze100_irq: pfuze100grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x40010000
-		>;
-	};
-
-	pinctrl_reg_3p3v_sd: mmcsupply1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x858
-		>;
-	};
-
-	pinctrl_reg_user_usb: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x40000038
-		>;
-	};
-
-	pinctrl_rmii_phy_irq: phygrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x40010000
-		>;
-	};
-
-	pinctrl_tc358767: tc358767grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x10
-		>;
-	};
-
-	pinctrl_tpa1: tpa6130-1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x40000038
-		>;
-	};
-
-	pinctrl_tpa2: tpa6130-2grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x40000038
-		>;
-	};
-
-	pinctrl_ts: tsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
-			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x10059
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10069
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x40010040
-			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x40010040
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x10059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10069
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x40010040
-			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x40010040
-
-		>;
-	};
-
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x1b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
deleted file mode 100644
index a39b86036581..000000000000
--- a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2016 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6qp.dtsi"
-#include "imx6qdl-nitrogen6_max.dtsi"
-
-/ {
-	model = "Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX Board";
-	compatible = "boundary,imx6qp-nitrogen6_max", "fsl,imx6qp";
-};
-
-&pcie {
-	status = "disabled";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts
deleted file mode 100644
index 011726c836cd..000000000000
--- a/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2017 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6qp.dtsi"
-#include "imx6qdl-nitrogen6_som2.dtsi"
-
-/ {
-	model = "Boundary Devices i.MX6 Quad Plus Nitrogen6_SOM2 Board";
-	compatible = "boundary,imx6qp-nitrogen6_som2", "fsl,imx6qp";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qp-sabreauto.dts b/arch/arm/boot/dts/imx6qp-sabreauto.dts
deleted file mode 100644
index 5ce3840d83d3..000000000000
--- a/arch/arm/boot/dts/imx6qp-sabreauto.dts
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Copyright 2016 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6qp.dtsi"
-#include "imx6qdl-sabreauto.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad Plus SABRE Automotive Board";
-	compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
-};
-
-&i2c2 {
-	max7322: gpio@68 {
-		compatible = "maxim,max7322";
-		reg = <0x68>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&iomuxc {
-	imx6qdl-sabreauto {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__ENET_MDIO          0x1b0b0
-				MX6QDL_PAD_KEY_COL2__ENET_MDC           0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b018
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b018
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b018
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b018
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b018
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b018
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b018
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b018
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b018
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b018
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b018
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b018
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-	};
-};
-
-&pcie {
-	status = "disabled";
-};
-
-&vgen3_reg {
-	regulator-always-on;
-};
diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
deleted file mode 100644
index a8a5004dd9c8..000000000000
--- a/arch/arm/boot/dts/imx6qp-sabresd.dts
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Copyright 2016 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6qp.dtsi"
-#include "imx6qdl-sabresd.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad Plus SABRE Smart Device Board";
-	compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
-};
-
-&reg_arm {
-	vin-supply = <&sw2_reg>;
-};
-
-&iomuxc {
-	imx6qdl-sabresd {
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
-				MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
-				MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
-				MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10071
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-			>;
-		};
-	};
-};
-
-&pcie {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts
deleted file mode 100644
index 547a76677ab3..000000000000
--- a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright (C) 2016-2017 Zodiac Inflight Innovations
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6qp.dtsi"
-#include "imx6qdl-zii-rdu2.dtsi"
-
-/ {
-	model = "ZII RDU2+ Board";
-	compatible = "zii,imx6qp-zii-rdu2", "fsl,imx6qp";
-};
diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi
deleted file mode 100644
index 299d863690c5..000000000000
--- a/arch/arm/boot/dts/imx6qp.dtsi
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * Copyright 2016 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "imx6q.dtsi"
-
-/ {
-	soc {
-		ocram2: sram@00940000 {
-			compatible = "mmio-sram";
-			reg = <0x00940000 0x20000>;
-			clocks = <&clks IMX6QDL_CLK_OCRAM>;
-		};
-
-		ocram3: sram@00960000 {
-			compatible = "mmio-sram";
-			reg = <0x00960000 0x20000>;
-			clocks = <&clks IMX6QDL_CLK_OCRAM>;
-		};
-
-		aips-bus@02100000 {
-			pre1: pre@21c8000 {
-				compatible = "fsl,imx6qp-pre";
-				reg = <0x021c8000 0x1000>;
-				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clks IMX6QDL_CLK_PRE0>;
-				clock-names = "axi";
-				fsl,iram = <&ocram2>;
-			};
-
-			pre2: pre@21c9000 {
-				compatible = "fsl,imx6qp-pre";
-				reg = <0x021c9000 0x1000>;
-				interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clks IMX6QDL_CLK_PRE1>;
-				clock-names = "axi";
-				fsl,iram = <&ocram2>;
-			};
-
-			pre3: pre@21ca000 {
-				compatible = "fsl,imx6qp-pre";
-				reg = <0x021ca000 0x1000>;
-				interrupts = <GIC_SPI 98 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clks IMX6QDL_CLK_PRE2>;
-				clock-names = "axi";
-				fsl,iram = <&ocram3>;
-			};
-
-			pre4: pre@21cb000 {
-				compatible = "fsl,imx6qp-pre";
-				reg = <0x021cb000 0x1000>;
-				interrupts = <GIC_SPI 99 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clks IMX6QDL_CLK_PRE3>;
-				clock-names = "axi";
-				fsl,iram = <&ocram3>;
-			};
-
-			prg1: prg@21cc000 {
-				compatible = "fsl,imx6qp-prg";
-				reg = <0x021cc000 0x1000>;
-				clocks = <&clks IMX6QDL_CLK_PRG0_APB>,
-					 <&clks IMX6QDL_CLK_PRG0_AXI>;
-				clock-names = "ipg", "axi";
-				fsl,pres = <&pre1>, <&pre2>, <&pre3>;
-			};
-
-			prg2: prg@21cd000 {
-				compatible = "fsl,imx6qp-prg";
-				reg = <0x021cd000 0x1000>;
-				clocks = <&clks IMX6QDL_CLK_PRG1_APB>,
-					 <&clks IMX6QDL_CLK_PRG1_AXI>;
-				clock-names = "ipg", "axi";
-				fsl,pres = <&pre4>, <&pre2>, <&pre3>;
-			};
-		};
-	};
-};
-
-&fec {
-	/delete-property/interrupts-extended;
-	interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
-		     <0 119 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpc {
-	compatible = "fsl,imx6qp-gpc", "fsl,imx6q-gpc";
-};
-
-&ipu1 {
-	compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
-	fsl,prg = <&prg1>;
-};
-
-&ipu2 {
-	compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
-	fsl,prg = <&prg2>;
-};
-
-&ldb {
-	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
-		 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
-		 <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
-		 <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>;
-	clock-names = "di0_pll", "di1_pll",
-		      "di0_sel", "di1_sel", "di2_sel", "di3_sel",
-		      "di0", "di1";
-};
-
-&mmdc0 {
-	compatible = "fsl,imx6qp-mmdc", "fsl,imx6q-mmdc";
-};
-
-&pcie {
-	compatible = "fsl,imx6qp-pcie", "snps,dw-pcie";
-};
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
deleted file mode 100644
index 0a90eea17018..000000000000
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ /dev/null
@@ -1,641 +0,0 @@
-/*
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx6sl.dtsi"
-
-/ {
-	model = "Freescale i.MX6 SoloLite EVK Board";
-	compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
-
-	memory {
-		reg = <0x80000000 0x40000000>;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		user {
-			label = "debug";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb_otg1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb_otg1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio4 0 0>;
-			enable-active-high;
-			vin-supply = <&swbst_reg>;
-		};
-
-		reg_usb_otg2_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_otg2_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio4 2 0>;
-			enable-active-high;
-			vin-supply = <&swbst_reg>;
-		};
-
-		reg_aud3v: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "wm8962-supply-3v15";
-			regulator-min-microvolt = <3150000>;
-			regulator-max-microvolt = <3150000>;
-			regulator-boot-on;
-		};
-
-		reg_aud4v: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "wm8962-supply-4v2";
-			regulator-min-microvolt = <4325000>;
-			regulator-max-microvolt = <4325000>;
-			regulator-boot-on;
-		};
-
-		reg_lcd_3v3: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "lcd-3v3";
-			gpio = <&gpio4 3 0>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
-		model = "wm8962-audio";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"Ext Spk", "SPKOUTL",
-			"Ext Spk", "SPKOUTR",
-			"AMIC", "MICBIAS",
-			"IN3R", "AMIC";
-		mux-int-port = <2>;
-		mux-ext-port = <3>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux3>;
-	status = "okay";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio4 11 0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p32", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pinctrl_fec>;
-	pinctrl-1 = <&pinctrl_fec_sleep>;
-	phy-mode = "rmii";
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic: pfuze100@08 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	codec: wm8962@1a {
-		compatible = "wlf,wm8962";
-		reg = <0x1a>;
-		clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>;
-		DCVDD-supply = <&vgen3_reg>;
-		DBVDD-supply = <&reg_aud3v>;
-		AVDD-supply = <&vgen3_reg>;
-		CPVDD-supply = <&vgen3_reg>;
-		MICVDD-supply = <&reg_aud3v>;
-		PLLVDD-supply = <&vgen3_reg>;
-		SPKVDD1-supply = <&reg_aud4v>;
-		SPKVDD2-supply = <&reg_aud4v>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6sl-evk {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6SL_PAD_KEY_ROW7__GPIO4_IO07    0x17059
-				MX6SL_PAD_KEY_COL7__GPIO4_IO06    0x17059
-				MX6SL_PAD_SD2_DAT7__GPIO5_IO00    0x17059
-				MX6SL_PAD_SD2_DAT6__GPIO4_IO29    0x17059
-				MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
-				MX6SL_PAD_KEY_COL4__GPIO4_IO00	0x80000000
-				MX6SL_PAD_KEY_COL5__GPIO4_IO02	0x80000000
-				MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0
-			>;
-		};
-
-		pinctrl_audmux3: audmux3grp {
-			fsl,pins = <
-				MX6SL_PAD_AUD_RXD__AUD3_RXD	  0x4130b0
-				MX6SL_PAD_AUD_TXC__AUD3_TXC	  0x4130b0
-				MX6SL_PAD_AUD_TXD__AUD3_TXD	  0x4110b0
-				MX6SL_PAD_AUD_TXFS__AUD3_TXFS	  0x4130b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO	0x100b1
-				MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x100b1
-				MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x100b1
-				MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11	0x80000000
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX6SL_PAD_FEC_MDC__FEC_MDC		0x1b0b0
-				MX6SL_PAD_FEC_MDIO__FEC_MDIO		0x1b0b0
-				MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV		0x1b0b0
-				MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0	0x1b0b0
-				MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1	0x1b0b0
-				MX6SL_PAD_FEC_TX_EN__FEC_TX_EN		0x1b0b0
-				MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0	0x1b0b0
-				MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1	0x1b0b0
-				MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT	0x4001b0a8
-			>;
-		};
-
-		pinctrl_fec_sleep: fecgrp-sleep {
-			fsl,pins = <
-				MX6SL_PAD_FEC_MDC__GPIO4_IO23      0x3080
-				MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25   0x3080
-				MX6SL_PAD_FEC_RXD0__GPIO4_IO17     0x3080
-				MX6SL_PAD_FEC_RXD1__GPIO4_IO18     0x3080
-				MX6SL_PAD_FEC_TX_EN__GPIO4_IO22    0x3080
-				MX6SL_PAD_FEC_TXD0__GPIO4_IO24     0x3080
-				MX6SL_PAD_FEC_TXD1__GPIO4_IO16     0x3080
-				MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26  0x3080
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6SL_PAD_I2C1_SCL__I2C1_SCL	0x4001b8b1
-				MX6SL_PAD_I2C1_SDA__I2C1_SDA	0x4001b8b1
-			>;
-		};
-
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6SL_PAD_I2C2_SCL__I2C2_SCL	0x4001b8b1
-				MX6SL_PAD_I2C2_SDA__I2C2_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_kpp: kppgrp {
-			fsl,pins = <
-				MX6SL_PAD_KEY_ROW0__KEY_ROW0    0x1b010
-				MX6SL_PAD_KEY_ROW1__KEY_ROW1    0x1b010
-				MX6SL_PAD_KEY_ROW2__KEY_ROW2    0x1b0b0
-				MX6SL_PAD_KEY_COL0__KEY_COL0    0x110b0
-				MX6SL_PAD_KEY_COL1__KEY_COL1    0x110b0
-				MX6SL_PAD_KEY_COL2__KEY_COL2    0x110b0
-			>;
-		};
-
-		pinctrl_lcd: lcdgrp {
-			fsl,pins = <
-				MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0b0
-				MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b0b0
-				MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1b0b0
-				MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1b0b0
-				MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1b0b0
-				MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1b0b0
-				MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x1b0b0
-				MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x1b0b0
-				MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x1b0b0
-				MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x1b0b0
-				MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b0b0
-				MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1b0b0
-				MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1b0b0
-				MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1b0b0
-				MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1b0b0
-				MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1b0b0
-				MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1b0b0
-				MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1b0b0
-				MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1b0b0
-				MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1b0b0
-				MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1b0b0
-				MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1b0b0
-				MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1b0b0
-				MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1b0b0
-				MX6SL_PAD_LCD_CLK__LCD_CLK 0x1b0b0
-				MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x1b0b0
-				MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x1b0b0
-				MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x1b0b0
-			>;
-		};
-
-		pinctrl_led: ledgrp {
-			fsl,pins = <
-				MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059
-			>;
-		};
-
-		pinctrl_pwm1: pwmgrp {
-			fsl,pins = <
-				MX6SL_PAD_PWM1__PWM1_OUT 0x110b0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x1b0b1
-				MX6SL_PAD_UART1_TXD__UART1_TX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg1: usbotg1grp {
-			fsl,pins = <
-				MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID	0x17059
-			>;
-		};
-
-		pinctrl_usdhc1: usdhc1grp {
-			fsl,pins = <
-				MX6SL_PAD_SD1_CMD__SD1_CMD		0x17059
-				MX6SL_PAD_SD1_CLK__SD1_CLK		0x10059
-				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x17059
-				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x17059
-				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x17059
-				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x17059
-				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x17059
-				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x17059
-				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x17059
-				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD1_CMD__SD1_CMD		0x170b9
-				MX6SL_PAD_SD1_CLK__SD1_CLK		0x100b9
-				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170b9
-				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170b9
-				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170b9
-				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170b9
-				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170b9
-				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170b9
-				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170b9
-				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170b9
-			>;
-		};
-
-		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD1_CMD__SD1_CMD		0x170f9
-				MX6SL_PAD_SD1_CLK__SD1_CLK		0x100f9
-				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
-				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
-				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
-				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
-				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170f9
-				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170f9
-				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170f9
-				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170f9
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6SL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
-				MX6SL_PAD_SD2_CLK__SD2_CLK		0x100b9
-				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
-				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
-				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
-				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
-			>;
-		};
-
-		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
-				MX6SL_PAD_SD2_CLK__SD2_CLK		0x100f9
-				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
-				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
-				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
-				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6SL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6SL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD3_CMD__SD3_CMD		0x170b9
-				MX6SL_PAD_SD3_CLK__SD3_CLK		0x100b9
-				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
-				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
-				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
-				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD3_CMD__SD3_CMD		0x170f9
-				MX6SL_PAD_SD3_CLK__SD3_CLK		0x100f9
-				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
-				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
-				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
-				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
-			>;
-		};
-	};
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp>;
-	linux,keymap = <
-			MATRIX_KEY(0x0, 0x0, KEY_UP)         /* ROW0, COL0 */
-			MATRIX_KEY(0x0, 0x1, KEY_DOWN)       /* ROW0, COL1 */
-			MATRIX_KEY(0x0, 0x2, KEY_ENTER)      /* ROW0, COL2 */
-			MATRIX_KEY(0x1, 0x0, KEY_HOME)       /* ROW1, COL0 */
-			MATRIX_KEY(0x1, 0x1, KEY_RIGHT)      /* ROW1, COL1 */
-			MATRIX_KEY(0x1, 0x2, KEY_LEFT)       /* ROW1, COL2 */
-			MATRIX_KEY(0x2, 0x0, KEY_VOLUMEDOWN) /* ROW2, COL0 */
-			MATRIX_KEY(0x2, 0x1, KEY_VOLUMEUP)   /* ROW2, COL1 */
-	>;
-	status = "okay";
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcd>;
-	lcd-supply = <&reg_lcd_3v3>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		bits-per-pixel = <32>;
-		bus-width = <24>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <33500000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <89>;
-				hfront-porch = <164>;
-				vback-porch = <23>;
-				vfront-porch = <10>;
-				hsync-len = <10>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	bus-width = <8>;
-	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts
deleted file mode 100644
index 72c7745f51d3..000000000000
--- a/arch/arm/boot/dts/imx6sl-warp.dts
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * Copyright 2014, 2015 O.S. Systems Software LTDA.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6sl.dtsi"
-
-/ {
-	model = "WaRP Board";
-	compatible = "warp,imx6sl-warp", "fsl,imx6sl";
-
-	memory {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	usdhc3_pwrseq: usdhc3_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, 	/* WL_REG_ON */
-			      <&gpio4 7 GPIO_ACTIVE_LOW>, 	/* WL_HOSTWAKE */
-			      <&gpio3 25 GPIO_ACTIVE_LOW>, 	/* BT_REG_ON */
-			      <&gpio3 27 GPIO_ACTIVE_LOW>,	/* BT_HOSTWAKE */
-			      <&gpio4 4 GPIO_ACTIVE_LOW>, 	/* BT_WAKE */
-			      <&gpio4 6 GPIO_ACTIVE_LOW>; 	/* BT_RST_N */
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbotg1 {
-	dr_mode = "peripheral";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	bus-width = <4>;
-	non-removable;
-	keep-power-in-suspend;
-	wakeup-source;
-	mmc-pwrseq = <&usdhc3_pwrseq>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx6sl-warp {
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x41b0b1
-				MX6SL_PAD_UART1_TXD__UART1_TX_DATA	0x41b0b1
-			>;
-		};
-
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6SL_PAD_AUD_RXC__UART3_RX_DATA	0x41b0b1
-				MX6SL_PAD_AUD_RXC__UART3_TX_DATA	0x41b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA	0x41b0b1
-				MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA	0x41b0b1
-				MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B	0x4130b1
-				MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B	0x4130b1
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6SL_PAD_SD2_CMD__SD2_CMD		0x417059
-				MX6SL_PAD_SD2_CLK__SD2_CLK		0x410059
-				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x417059
-				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x417059
-				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x417059
-				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x417059
-				MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x417059
-				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x417059
-				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x417059
-				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x417059
-				MX6SL_PAD_SD2_RST__SD2_RESET		0x417059
-			>;
-		};
-
-		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD2_CMD__SD2_CMD		0x4170b9
-				MX6SL_PAD_SD2_CLK__SD2_CLK		0x4100b9
-				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x4170b9
-				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x4170b9
-				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x4170b9
-				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x4170b9
-				MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x4170b9
-				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x4170b9
-				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x4170b9
-				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x4170b9
-				MX6SL_PAD_SD2_RST__SD2_RESET		0x4170b9
-			>;
-		};
-
-		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD2_CMD__SD2_CMD		0x4170f9
-				MX6SL_PAD_SD2_CLK__SD2_CLK		0x4100f9
-				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x4170f9
-				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x4170f9
-				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x4170f9
-				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x4170f9
-				MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x4170f9
-				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x4170f9
-				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x4170f9
-				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x4170f9
-				MX6SL_PAD_SD2_RST__SD2_RESET		0x4170f9
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6SL_PAD_SD3_CMD__SD3_CMD		0x417059
-				MX6SL_PAD_SD3_CLK__SD3_CLK		0x410059
-				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x417059
-				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x417059
-				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x417059
-				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x417059
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD3_CMD__SD3_CMD		0x4170b9
-				MX6SL_PAD_SD3_CLK__SD3_CLK		0x4100b9
-				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x4170b9
-				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x4170b9
-				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x4170b9
-				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x4170b9
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD3_CMD__SD3_CMD		0x4170f9
-				MX6SL_PAD_SD3_CLK__SD3_CLK		0x4100f9
-				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x4170f9
-				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x4170f9
-				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x4170f9
-				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x4170f9
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
deleted file mode 100644
index c5578d1c1ee4..000000000000
--- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
+++ /dev/null
@@ -1,708 +0,0 @@
-/*
- * Copyright (C) 2016 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6sx.dtsi"
-
-/ {
-	model = "Boundary Devices i.MX6 SoloX Nitrogen6sx Board";
-	compatible = "boundary,imx6sx-nitrogen6sx", "fsl,imx6sx";
-
-	aliases {
-		fb_lcd = &lcdif1;
-		t_lcd = &t_lcd;
-	};
-
-	memory {
-		reg = <0x80000000 0x40000000>;
-	};
-
-	backlight-lvds {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		power-supply = <&reg_3p3v>;
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_can1_3v3: regulator-can1-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "can1-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_can2_3v3: regulator-can2-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "can2-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio4 24 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotg1_vbus>;
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_wlan: regulator-wlan {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_wlan>;
-		compatible = "regulator-fixed";
-		clocks = <&clks IMX6SX_CLK_CKO>;
-		clock-names = "slow";
-		regulator-name = "wlan-en";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <70000>;
-		gpio = <&gpio7 6 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx6sx-nitrogen6sx-sgtl5000";
-		cpu-dai = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <5>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		compatible = "microchip,sst25vf016b";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "U-Boot";
-			reg = <0x0 0xc0000>;
-			read-only;
-		};
-
-		partition@c0000 {
-			label = "env";
-			reg = <0xc0000 0x2000>;
-			read-only;
-		};
-
-		partition@c2000 {
-			label = "Kernel";
-			reg = <0xc2000 0x11e000>;
-		};
-
-		partition@1e0000 {
-			label = "M4";
-			reg = <0x1e0000 0x20000>;
-		};
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy1>;
-	phy-supply = <&reg_3p3v>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@4 {
-			reg = <4>;
-		};
-
-		ethphy2: ethernet-phy@5 {
-			reg = <5>;
-		};
-	};
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy2>;
-	phy-supply = <&reg_3p3v>;
-	fsl,magic-packet;
-	status = "okay";
-};
-
-&flexcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_can1_3v3>;
-	status = "okay";
-};
-
-&flexcan2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_can2_3v3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sgtl5000>;
-		reg = <0x0a>;
-		clocks = <&clks IMX6SX_CLK_CKO2>;
-		VDDA-supply = <&reg_1p8v>;
-		VDDIO-supply = <&reg_1p8v>;
-		VDDD-supply = <&reg_1p8v>;
-		assigned-clocks = <&clks IMX6SX_CLK_CKO2_SEL>,
-				  <&clks IMX6SX_CLK_CKO2>;
-		assigned-clock-parents = <&clks IMX6SX_CLK_OSC>;
-		assigned-clock-rates = <0>, <24000000>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&lcdif1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif1>;
-	lcd-supply = <&reg_3p3v>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		bits-per-pixel = <16>;
-		bus-width = <24>;
-
-		display-timings {
-			native-mode = <&t_lcd>;
-			t_lcd: t_lcd_default {
-				clock-frequency = <74160000>;
-				hactive = <1280>;
-				vactive = <720>;
-				hback-porch = <220>;
-				hfront-porch = <110>;
-				vback-porch = <20>;
-				vfront-porch = <5>;
-				hsync-len = <40>;
-				vsync-len = <5>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio4 10 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1>;
-	status = "okay";
-};
-
-&usbotg2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg2>;
-	dr_mode = "host";
-	disable-over-current;
-	reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
-	keep-power-in-suspend;
-	wakeup-source;
-	status = "okay";
-};
-
-&usdhc3 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <4>;
-	non-removable;
-	keep-power-in-suspend;
-	vmmc-supply = <&reg_wlan>;
-	cap-power-off-card;
-	cap-sdio-irq;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-		interrupt-parent = <&gpio7>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-	};
-
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-&usdhc4 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc4_50mhz>;
-	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
-	bus-width = <8>;
-	non-removable;
-	vmmc-supply = <&reg_1p8v>;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD	0x1b0b0
-			MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC	0x1b0b0
-			MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS	0x1b0b0
-			MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD	0x1b0b0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6SX_PAD_KEY_COL1__ECSPI1_MISO		0x100b1
-			MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI		0x100b1
-			MX6SX_PAD_KEY_COL0__ECSPI1_SCLK		0x100b1
-			MX6SX_PAD_KEY_ROW1__GPIO2_IO_16		0x0b0b1
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0x1b0b0
-			MX6SX_PAD_ENET1_MDC__ENET1_MDC		0x1b0b0
-			MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0x30b1
-			MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0x30b1
-			MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2	0x30b1
-			MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3	0x30b1
-			MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC	0x30b1
-			MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0x30b1
-			MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081
-			MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081
-			MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081
-			MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2	0x3081
-			MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3	0x3081
-			MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK	0x3081
-			MX6SX_PAD_ENET2_CRS__GPIO2_IO_7		0xb0b0
-			MX6SX_PAD_ENET1_RX_CLK__GPIO2_IO_4	0xb0b0
-			MX6SX_PAD_ENET1_TX_CLK__GPIO2_IO_5	0xb0b0
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0	0x30b1
-			MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1	0x30b1
-			MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2	0x30b1
-			MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3	0x30b1
-			MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC	0x30b1
-			MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN	0x30b1
-			MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0	0x3081
-			MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1	0x3081
-			MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN	0x3081
-			MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2	0x3081
-			MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3	0x3081
-			MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK	0x3081
-			MX6SX_PAD_ENET2_COL__GPIO2_IO_6		0xb0b0
-			MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8	0xb0b0
-			MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9	0xb0b0
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6SX_PAD_QSPI1B_DQS__CAN1_TX		0x1b0b0
-			MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX		0x1b0b0
-			MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27	0x1b0b0
-			MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27	0x0b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6SX_PAD_QSPI1A_DQS__CAN2_TX		0x1b0b0
-			MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX		0x1b0b0
-			MX6SX_PAD_QSPI1B_DATA0__GPIO4_IO_24	0x0b0b0
-		>;
-	};
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			MX6SX_PAD_NAND_CE0_B__GPIO4_IO_1	0x1b0b0
-			MX6SX_PAD_NAND_CLE__GPIO4_IO_3		0x1b0b0
-			MX6SX_PAD_NAND_RE_B__GPIO4_IO_12	0x1b0b0
-			MX6SX_PAD_NAND_WE_B__GPIO4_IO_14	0x1b0b0
-			MX6SX_PAD_NAND_WP_B__GPIO4_IO_15	0x1b0b0
-			MX6SX_PAD_NAND_READY_B__GPIO4_IO_13	0x1b0b0
-			MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16	0x1b0b0
-			MX6SX_PAD_QSPI1A_DATA1__GPIO4_IO_17	0x1b0b0
-			MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18	0x1b0b0
-			MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19	0x1b0b0
-			MX6SX_PAD_SD1_CMD__CCM_CLKO1		0x000b0
-			MX6SX_PAD_SD3_DATA5__GPIO7_IO_7		0x1b0b0
-			/* Test points */
-			MX6SX_PAD_NAND_DATA04__GPIO4_IO_8	0x1b0b0
-			MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25	0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1
-			MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO02__I2C2_SCL		0x4001b8b1
-			MX6SX_PAD_GPIO1_IO03__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6SX_PAD_KEY_COL4__I2C3_SCL		0x4001b8b1
-			MX6SX_PAD_KEY_ROW4__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_lcdif1: lcdif1grp {
-		fsl,pins = <
-			MX6SX_PAD_LCD1_CLK__LCDIF1_CLK		0x4001b0b0
-			MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE	0x4001b0b0
-			MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC	0x4001b0b0
-			MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC	0x4001b0b0
-			MX6SX_PAD_LCD1_RESET__GPIO3_IO_27	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23	0x4001b0b0
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6SX_PAD_NAND_DATA05__GPIO4_IO_9	0xb0b0
-			MX6SX_PAD_NAND_DATA06__GPIO4_IO_10	0xb0b0
-			MX6SX_PAD_NAND_DATA07__GPIO4_IO_11	0xb0b0
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO13__PWM4_OUT		0x110b0
-		>;
-	};
-
-	pinctrl_reg_wlan: reg-wlangrp {
-		fsl,pins = <
-			MX6SX_PAD_SD3_DATA4__GPIO7_IO_6		0x1b0b0
-			MX6SX_PAD_GPIO1_IO11__CCM_CLKO1		0x000b0
-		>;
-	};
-
-	pinctrl_sgtl5000: sgtl5000grp {
-		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO12__CCM_CLKO2		0x000b0
-			MX6SX_PAD_ENET1_COL__GPIO2_IO_0		0x1b0b0
-			MX6SX_PAD_ENET1_CRS__GPIO2_IO_1		0x1b0b0
-			MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22	0xb0b0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
-			MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO06__UART2_TX		0x1b0b1
-			MX6SX_PAD_GPIO1_IO07__UART2_RX		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6SX_PAD_QSPI1B_SS0_B__UART3_TX	0x1b0b1
-			MX6SX_PAD_QSPI1B_SCLK__UART3_RX		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6SX_PAD_KEY_COL3__UART5_TX		0x1b0b1
-			MX6SX_PAD_KEY_ROW3__UART5_RX		0x1b0b1
-			MX6SX_PAD_SD3_DATA6__UART3_RTS_B	0x1b0b1
-			MX6SX_PAD_SD3_DATA7__UART3_CTS_B	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg1: usbotg1grp {
-		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC	0x1b0b0
-			MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x170b1
-		>;
-	};
-
-	pinctrl_usbotg1_vbus: usbotg1-vbusgrp {
-		fsl,pins = <
-			MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x1b0b0
-		>;
-	};
-
-	pinctrl_usbotg2: usbotg2grp {
-		fsl,pins = <
-			MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26	0xb0b0
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
-			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059
-			MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059
-			MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059
-			MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059
-			MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059
-			MX6SX_PAD_KEY_COL2__GPIO2_IO_12		0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10071
-			MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17071
-			MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17071
-			MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17071
-			MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17071
-			MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17071
-		>;
-	};
-
-	pinctrl_usdhc4_50mhz: usdhc4-50mhzgrp {
-		fsl,pins = <
-			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10071
-			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17071
-			MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B	0x17071
-			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17071
-			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17071
-			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17071
-			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17071
-			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x17071
-			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x17071
-			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x17071
-			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x17071
-		>;
-	};
-
-	pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp {
-		fsl,pins = <
-			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x100b9
-			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x170b9
-			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x170b9
-			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x170b9
-			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x170b9
-			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x170b9
-			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x170b9
-			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x170b9
-			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x170b9
-			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp {
-		fsl,pins = <
-			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x100f9
-			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x170f9
-			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x170f9
-			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x170f9
-			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x170f9
-			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x170f9
-			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x170f9
-			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x170f9
-			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x170f9
-			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x170f9
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
deleted file mode 100644
index 240a2864d044..000000000000
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Copyright (C) 2014 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "imx6sx.dtsi"
-
-/ {
-	model = "Freescale i.MX6 SoloX Sabre Auto Board";
-	compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx";
-
-	memory {
-		reg = <0x80000000 0x80000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vcc_sd3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_vcc_sd3>;
-			regulator-name = "VCC_SD3";
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	bus-width = <8>;
-	cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&vcc_sd3>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	status = "okay";
-};
-
-&iomuxc {
-	imx6x-sabreauto {
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
-				MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17059
-				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10059
-				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17059
-				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17059
-				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17059
-				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17059
-				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x17059
-				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x17059
-				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x17059
-				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x17059
-				MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x17059 /* CD */
-				MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x17059 /* WP */
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
-			fsl,pins = <
-				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170b9
-				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100b9
-				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170b9
-				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170b9
-				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170b9
-				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170b9
-				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170b9
-				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170b9
-				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170b9
-				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170b9
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
-			fsl,pins = <
-				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170f9
-				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100f9
-				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170f9
-				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170f9
-				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170f9
-				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170f9
-				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170f9
-				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170f9
-				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170f9
-				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170f9
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
-				MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
-				MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17059
-				MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17059
-				MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17059
-				MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17059
-				MX6SX_PAD_SD4_DATA7__GPIO6_IO_21	0x17059 /* CD */
-				MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */
-			>;
-		};
-
-		pinctrl_vcc_sd3: vccsd3grp {
-			fsl,pins = <
-				MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6sx-sdb-sai.dts b/arch/arm/boot/dts/imx6sx-sdb-sai.dts
deleted file mode 100644
index 2ac865b7c364..000000000000
--- a/arch/arm/boot/dts/imx6sx-sdb-sai.dts
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Copyright (C) 2016 NXP Semiconductors
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "imx6sx-sdb.dts"
-
-/ {
-	sound {
-		audio-cpu = <&sai1>;
-	};
-};
-
-&audmux {
-	/* pin conflict with sai */
-	status = "disabled";
-};
-
-&sai1 {
-	status = "okay";
-};
-
-&sdma {
-	gpr = <&gpr>;
-	/* SDMA event remap for SAI1 */
-	fsl,sdma-event-remap = <0 15 1>, <0 16 1>;
-};
-
-&ssi2 {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
deleted file mode 100644
index da815527a7f8..000000000000
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ /dev/null
@@ -1,612 +0,0 @@
-/*
- * Copyright (C) 2014 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx6sx.dtsi"
-
-/ {
-	model = "Freescale i.MX6 SoloX SDB Board";
-	compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory {
-		reg = <0x80000000 0x40000000>;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vcc_sd3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_vcc_sd3>;
-			regulator-name = "VCC_SD3";
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb_otg1_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb_otg1>;
-			regulator-name = "usb_otg1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb_otg2_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb_otg2>;
-			regulator-name = "usb_otg2_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_psu_5v: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "PSU-5V0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-
-		reg_lcd_3v3: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "lcd-3v3";
-			gpio = <&gpio3 27 0>;
-			enable-active-high;
-		};
-
-		reg_peri_3v3: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_peri_3v3>;
-			regulator-name = "peri_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			regulator-always-on;
-		};
-
-		reg_enet_3v3: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_enet_3v3>;
-			regulator-name = "enet_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
-		model = "wm8962-audio";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"Ext Spk", "SPKOUTL",
-			"Ext Spk", "SPKOUTR",
-			"AMIC", "MICBIAS",
-			"IN3R", "AMIC";
-		mux-int-port = <2>;
-		mux-ext-port = <6>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-supply = <&reg_enet_3v3>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@1 {
-			reg = <1>;
-		};
-
-		ethphy2: ethernet-phy@2 {
-			reg = <2>;
-		};
-	};
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	status = "okay";
-
-	codec: wm8962@1a {
-		compatible = "wlf,wm8962";
-		reg = <0x1a>;
-		clocks = <&clks IMX6SX_CLK_AUDIO>;
-		DCVDD-supply = <&vgen4_reg>;
-		DBVDD-supply = <&vgen4_reg>;
-		AVDD-supply = <&vgen4_reg>;
-		CPVDD-supply = <&vgen4_reg>;
-		MICVDD-supply = <&vgen3_reg>;
-		PLLVDD-supply = <&vgen4_reg>;
-		SPKVDD1-supply = <&reg_psu_5v>;
-		SPKVDD2-supply = <&reg_psu_5v>;
-	};
-};
-
-&lcdif1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcd>;
-	lcd-supply = <&reg_lcd_3v3>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		bits-per-pixel = <16>;
-		bus-width = <24>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <33500000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <89>;
-				hfront-porch = <164>;
-				vback-porch = <23>;
-				vfront-porch = <10>;
-				hsync-len = <10>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&sai1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai1>;
-	status = "disabled";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart5 { /* for bluetooth */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_otg1_id>;
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy1 {
-	fsl,tx-d-cal = <106>;
-};
-
-&usbphy2 {
-	fsl,tx-d-cal = <106>;
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	non-removable;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	bus-width = <8>;
-	cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&vcc_sd3>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	imx6x-sdb {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC	0x130b0
-				MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS	0x130b0
-				MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD	0x120b0
-				MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD	0x130b0
-				MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
-			>;
-		};
-
-		pinctrl_enet1: enet1grp {
-			fsl,pins = <
-				MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0b1
-				MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0b1
-				MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC	0xa0b1
-				MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0b1
-				MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0b1
-				MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2	0xa0b1
-				MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3	0xa0b1
-				MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0b1
-				MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK	0x3081
-				MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081
-				MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081
-				MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2	0x3081
-				MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3	0x3081
-				MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081
-				MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91
-			>;
-		};
-
-		pinctrl_enet_3v3: enet3v3grp {
-			fsl,pins = <
-				MX6SX_PAD_ENET2_COL__GPIO2_IO_6		0x80000000
-			>;
-		};
-
-		pinctrl_enet2: enet2grp {
-			fsl,pins = <
-				MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC	0xa0b9
-				MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0	0xa0b1
-				MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1	0xa0b1
-				MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2	0xa0b1
-				MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3	0xa0b1
-				MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN	0xa0b1
-				MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK	0x3081
-				MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0	0x3081
-				MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1	0x3081
-				MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2	0x3081
-				MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3	0x3081
-				MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN	0x3081
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio_keysgrp {
-			fsl,pins = <
-				MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
-				MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1
-				MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6SX_PAD_KEY_ROW4__I2C3_SDA		0x4001b8b1
-				MX6SX_PAD_KEY_COL4__I2C3_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c4: i2c4grp {
-			fsl,pins = <
-				MX6SX_PAD_CSI_DATA07__I2C4_SDA		0x4001b8b1
-				MX6SX_PAD_CSI_DATA06__I2C4_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_lcd: lcdgrp {
-			fsl,pins = <
-				MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
-				MX6SX_PAD_LCD1_CLK__LCDIF1_CLK	0x4001b0b0
-				MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
-				MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
-				MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
-				MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
-			>;
-		};
-
-		pinctrl_peri_3v3: peri3v3grp {
-			fsl,pins = <
-				MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16	0x80000000
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp-1 {
-			fsl,pins = <
-				MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0
-			>;
-		};
-
-		pinctrl_qspi2: qspi2grp {
-			fsl,pins = <
-				MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0     0x70f1
-				MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1  0x70f1
-				MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2    0x70f1
-				MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3    0x70f1
-				MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK        0x70f1
-				MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B       0x70f1
-				MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0   0x70f1
-				MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1   0x70f1
-				MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2     0x70f1
-				MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3     0x70f1
-				MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK     0x70f1
-				MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B    0x70f1
-			>;
-		};
-
-		pinctrl_vcc_sd3: vccsd3grp {
-			fsl,pins = <
-				MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
-			>;
-		};
-
-		pinctrl_sai1: sai1grp {
-			fsl,pins = <
-				MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK	0x130b0
-				MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC	0x130b0
-				MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0	0x120b0
-				MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0	0x130b0
-				MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
-				MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6SX_PAD_KEY_ROW3__UART5_RX		0x1b0b1
-				MX6SX_PAD_KEY_COL3__UART5_TX		0x1b0b1
-				MX6SX_PAD_KEY_ROW2__UART5_CTS_B		0x1b0b1
-				MX6SX_PAD_KEY_COL2__UART5_RTS_B		0x1b0b1
-			>;
-		};
-
-		pinctrl_usb_otg1: usbotg1grp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0
-			>;
-		};
-
-		pinctrl_usb_otg1_id: usbotg1idgrp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059
-			>;
-		};
-
-		pinctrl_usb_otg2: usbot2ggrp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12	0x10b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
-				MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059
-				MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059
-				MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059
-				MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059
-				MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17059
-				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10059
-				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17059
-				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17059
-				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17059
-				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17059
-				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x17059
-				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x17059
-				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x17059
-				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x17059
-				MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x17059 /* CD */
-				MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x17059 /* WP */
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
-			fsl,pins = <
-				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170b9
-				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100b9
-				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170b9
-				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170b9
-				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170b9
-				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170b9
-				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170b9
-				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170b9
-				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170b9
-				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170b9
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
-			fsl,pins = <
-				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170f9
-				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100f9
-				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170f9
-				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170f9
-				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170f9
-				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170f9
-				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170f9
-				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170f9
-				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170f9
-				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170f9
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
-				MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
-				MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17059
-				MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17059
-				MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17059
-				MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17059
-				MX6SX_PAD_SD4_DATA7__GPIO6_IO_21	0x17059 /* CD */
-				MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */
-			>;
-		};
-
-		pinctrl_wdog: wdoggrp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
deleted file mode 100644
index 0c1fc1a8f913..000000000000
--- a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Copyright (c) 2016 Andreas Färber
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6sx-udoo-neo.dtsi"
-
-/ {
-	model = "UDOO Neo Basic";
-	compatible = "udoo,neobasic", "fsl,imx6sx";
-
-	memory {
-		reg = <0x80000000 0x20000000>;
-	};
-};
-
-&fec1 {
-	phy-handle = <&ethphy1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
deleted file mode 100644
index 5d6c2274ee2b..000000000000
--- a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (c) 2016 Andreas Färber
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6sx-udoo-neo.dtsi"
-
-/ {
-	model = "UDOO Neo Extended";
-	compatible = "udoo,neoextended", "fsl,imx6sx";
-
-	memory {
-		reg = <0x80000000 0x40000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
deleted file mode 100644
index 653ceb29e28b..000000000000
--- a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Copyright (c) 2016 Andreas Färber
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6sx-udoo-neo.dtsi"
-
-/ {
-	model = "UDOO Neo Full";
-	compatible = "udoo,neofull", "fsl,imx6sx";
-
-	memory {
-		reg = <0x80000000 0x40000000>;
-	};
-};
-
-&fec1 {
-	phy-handle = <&ethphy1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
deleted file mode 100644
index dcfc97591433..000000000000
--- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
+++ /dev/null
@@ -1,425 +0,0 @@
-/*
- * Copyright (c) 2016 Andreas Färber
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "imx6sx.dtsi"
-
-/ {
-	compatible = "fsl,imx6sx";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		red {
-			label = "udoo-neo:red:mmc";
-			gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc0";
-		};
-
-		orange {
-			label = "udoo-neo:orange:user";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-	};
-
-	reg_sdio_pwr: regulator-sdio-pwr {
-		compatible = "regulator-fixed";
-		gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-name = "SDIO_PWR";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_otg1_reg>;
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_otg2_reg>;
-		regulator-name = "usb_otg2_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_wlan: regulator-wlan {
-		compatible = "regulator-fixed";
-		regulator-name = "wlan-en-regulator";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	reg_bt: regulator-bt {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_bt_reg>;
-		enable-active-high;
-		gpio = <&gpio2 17 GPIO_ACTIVE_HIGH>;
-		regulator-name = "bt_reg";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rmii";
-	phy-reset-duration = <10>;
-	phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	pmic: pmic@08 {
-		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1a {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1b {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vldo1 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vldo2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vccsd {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: v33 {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vldo4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl_bt_reg: btreggrp {
-		fsl,pins =
-			<MX6SX_PAD_KEY_ROW2__GPIO2_IO_17        0x15059>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins =
-			<MX6SX_PAD_ENET1_CRS__GPIO2_IO_1	0xa0b1>,
-			<MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0b1>,
-			<MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0b1>,
-			<MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0b1>,
-			<MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0b1>,
-			<MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0b1>,
-
-			<MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x3081>,
-			<MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9	0x3081>,
-			<MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081>,
-			<MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081>,
-			<MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081>,
-			<MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER	0x3081>,
-
-			<MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1>,
-			<MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1>,
-			<MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO06__UART2_TX		0x1b0b1>,
-			<MX6SX_PAD_GPIO1_IO07__UART2_RX		0x1b0b1>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins =
-			<MX6SX_PAD_SD3_DATA4__UART3_RX          0x13059>,
-			<MX6SX_PAD_SD3_DATA5__UART3_TX          0x13059>,
-			<MX6SX_PAD_SD3_DATA6__UART3_RTS_B       0x13059>,
-			<MX6SX_PAD_SD3_DATA7__UART3_CTS_B       0x13059>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins =
-			<MX6SX_PAD_SD4_DATA4__UART5_RX		0x1b0b1>,
-			<MX6SX_PAD_SD4_DATA5__UART5_TX		0x1b0b1>;
-	};
-
-	pinctrl_uart6: uart6grp {
-		fsl,pins =
-			<MX6SX_PAD_CSI_DATA00__UART6_RI_B	0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA01__UART6_DSR_B	0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA02__UART6_DTR_B	0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA03__UART6_DCD_B	0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA04__UART6_RX		0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA05__UART6_TX		0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA06__UART6_RTS_B	0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA07__UART6_CTS_B	0x1b0b1>;
-	};
-
-	pinctrl_otg1_reg: otg1grp {
-		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9        0x10b0>;
-	};
-
-
-	pinctrl_otg2_reg: otg2grp {
-		fsl,pins =
-			<MX6SX_PAD_NAND_RE_B__GPIO4_IO_12        0x10b0>;
-	};
-
-	pinctrl_usb_otg1: usbotg1grp {
-		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID    0x17059>,
-			<MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC       0x10b0>;
-	};
-
-	pinctrl_usb_otg2: usbot2ggrp {
-		fsl,pins =
-			<MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC     0x10b0>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins =
-			<MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059>,
-			<MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059>,
-			<MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059>,
-			<MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059>,
-			<MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059>,
-			<MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059>,
-			<MX6SX_PAD_SD1_DATA0__GPIO6_IO_2	0x17059>; /* CD */
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins =
-			<MX6SX_PAD_KEY_COL2__GPIO2_IO_12	0x15059>,
-			<MX6SX_PAD_KEY_ROW1__GPIO2_IO_16	0x13059>,
-			<MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17069>,
-			<MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17069>,
-			<MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17069>,
-			<MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17069>,
-			<MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17069>,
-			<MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10069>,
-			<MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT	0x10059>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-/* Cortex-M4 serial */
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "disabled";
-};
-
-&uart3 { /* Bluetooth */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-/* Arduino serial */
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "disabled";
-};
-
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart6>;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-&usbotg1 { /* J2 micro USB port */
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_otg1>;
-	status = "okay";
-};
-
-&usbotg2 { /* J3 host USB port */
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_otg2>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	vmmc-supply = <&reg_sdio_pwr>;
-	bus-width = <4>;
-	cd-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	status = "okay";
-};
-
-&usdhc3 { /* Wi-Fi */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	non-removable;
-	vmmc-supply = <&reg_wlan>;
-	cap-power-off-card;
-	wakeup-source;
-	keep-power-in-suspend;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1831";
-		reg = <2>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <16 IRQ_TYPE_EDGE_RISING>;
-		ref-clock-frequency = <38400000>;
-		tcxo-clock-frequency = <26000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
deleted file mode 100644
index f16b9df9d0c6..000000000000
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ /dev/null
@@ -1,1322 +0,0 @@
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/clock/imx6sx-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "imx6sx-pinfunc.h"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	/*
-	 * The decompressor and also some bootloaders rely on a
-	 * pre-existing /chosen node to be available to insert the
-	 * command line and merge other ATAGS info.
-	 * Also for U-Boot there must be a pre-existing /memory node.
-	 */
-	chosen {};
-	memory { device_type = "memory"; reg = <0 0>; };
-
-	aliases {
-		can0 = &flexcan1;
-		can1 = &flexcan2;
-		ethernet0 = &fec1;
-		ethernet1 = &fec2;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		gpio5 = &gpio6;
-		gpio6 = &gpio7;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		i2c3 = &i2c4;
-		mmc0 = &usdhc1;
-		mmc1 = &usdhc2;
-		mmc2 = &usdhc3;
-		mmc3 = &usdhc4;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-		spi0 = &ecspi1;
-		spi1 = &ecspi2;
-		spi2 = &ecspi3;
-		spi3 = &ecspi4;
-		spi4 = &ecspi5;
-		usbphy0 = &usbphy1;
-		usbphy1 = &usbphy2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			operating-points = <
-				/* kHz    uV */
-				996000  1250000
-				792000  1175000
-				396000  1075000
-				198000	975000
-			>;
-			fsl,soc-operating-points = <
-				/* ARM kHz  SOC uV */
-				996000      1175000
-				792000      1175000
-				396000      1175000
-				198000	    1175000
-			>;
-			clock-latency = <61036>; /* two CLK32 periods */
-			clocks = <&clks IMX6SX_CLK_ARM>,
-				 <&clks IMX6SX_CLK_PLL2_PFD2>,
-				 <&clks IMX6SX_CLK_STEP>,
-				 <&clks IMX6SX_CLK_PLL1_SW>,
-				 <&clks IMX6SX_CLK_PLL1_SYS>;
-			clock-names = "arm", "pll2_pfd2_396m", "step",
-				      "pll1_sw", "pll1_sys";
-			arm-supply = <&reg_arm>;
-			soc-supply = <&reg_soc>;
-		};
-	};
-
-	intc: interrupt-controller@00a01000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x00a01000 0x1000>,
-		      <0x00a00100 0x100>;
-		interrupt-parent = <&intc>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ckil: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "ckil";
-		};
-
-		osc: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-			clock-output-names = "osc";
-		};
-
-		ipp_di0: clock@2 {
-			compatible = "fixed-clock";
-			reg = <2>;
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "ipp_di0";
-		};
-
-		ipp_di1: clock@3 {
-			compatible = "fixed-clock";
-			reg = <3>;
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "ipp_di1";
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gpc>;
-		ranges;
-
-		pmu {
-			compatible = "arm,cortex-a9-pmu";
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		ocram: sram@00900000 {
-			compatible = "mmio-sram";
-			reg = <0x00900000 0x20000>;
-			clocks = <&clks IMX6SX_CLK_OCRAM>;
-		};
-
-		L2: l2-cache@00a02000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x00a02000 0x1000>;
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-			cache-unified;
-			cache-level = <2>;
-			arm,tag-latency = <4 2 3>;
-			arm,data-latency = <4 2 3>;
-		};
-
-		gpu: gpu@01800000 {
-			compatible = "vivante,gc";
-			reg = <0x01800000 0x4000>;
-			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks IMX6SX_CLK_GPU>,
-				 <&clks IMX6SX_CLK_GPU>,
-				 <&clks IMX6SX_CLK_GPU>;
-			clock-names = "bus", "core", "shader";
-		};
-
-		dma_apbh: dma-apbh@01804000 {
-			compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
-			reg = <0x01804000 0x2000>;
-			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
-			#dma-cells = <1>;
-			dma-channels = <4>;
-			clocks = <&clks IMX6SX_CLK_APBH_DMA>;
-		};
-
-		gpmi: gpmi-nand@01806000{
-			compatible = "fsl,imx6sx-gpmi-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x01806000 0x2000>, <0x01808000 0x4000>;
-			reg-names = "gpmi-nand", "bch";
-			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "bch";
-			clocks = <&clks IMX6SX_CLK_GPMI_IO>,
-				 <&clks IMX6SX_CLK_GPMI_APB>,
-				 <&clks IMX6SX_CLK_GPMI_BCH>,
-				 <&clks IMX6SX_CLK_GPMI_BCH_APB>,
-				 <&clks IMX6SX_CLK_PER1_BCH>;
-			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
-				      "gpmi_bch_apb", "per1_bch";
-			dmas = <&dma_apbh 0>;
-			dma-names = "rx-tx";
-			status = "disabled";
-		};
-
-		aips1: aips-bus@02000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02000000 0x100000>;
-			ranges;
-
-			spba-bus@02000000 {
-				compatible = "fsl,spba-bus", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x02000000 0x40000>;
-				ranges;
-
-				spdif: spdif@02004000 {
-					compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif";
-					reg = <0x02004000 0x4000>;
-					interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-					dmas = <&sdma 14 18 0>,
-					       <&sdma 15 18 0>;
-					dma-names = "rx", "tx";
-					clocks = <&clks IMX6SX_CLK_SPDIF_GCLK>,
-						 <&clks IMX6SX_CLK_OSC>,
-						 <&clks IMX6SX_CLK_SPDIF>,
-						 <&clks 0>, <&clks 0>, <&clks 0>,
-						 <&clks IMX6SX_CLK_IPG>,
-						 <&clks 0>, <&clks 0>,
-						 <&clks IMX6SX_CLK_SPBA>;
-					clock-names = "core", "rxtx0",
-						      "rxtx1", "rxtx2",
-						      "rxtx3", "rxtx4",
-						      "rxtx5", "rxtx6",
-						      "rxtx7", "spba";
-					status = "disabled";
-				};
-
-				ecspi1: ecspi@02008000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02008000 0x4000>;
-					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_ECSPI1>,
-						 <&clks IMX6SX_CLK_ECSPI1>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi2: ecspi@0200c000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
-					reg = <0x0200c000 0x4000>;
-					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_ECSPI2>,
-						 <&clks IMX6SX_CLK_ECSPI2>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi3: ecspi@02010000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02010000 0x4000>;
-					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_ECSPI3>,
-						 <&clks IMX6SX_CLK_ECSPI3>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi4: ecspi@02014000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02014000 0x4000>;
-					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_ECSPI4>,
-						 <&clks IMX6SX_CLK_ECSPI4>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				uart1: serial@02020000 {
-					compatible = "fsl,imx6sx-uart",
-						     "fsl,imx6q-uart", "fsl,imx21-uart";
-					reg = <0x02020000 0x4000>;
-					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_UART_IPG>,
-						 <&clks IMX6SX_CLK_UART_SERIAL>;
-					clock-names = "ipg", "per";
-					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-
-				esai: esai@02024000 {
-					reg = <0x02024000 0x4000>;
-					interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
-						 <&clks IMX6SX_CLK_ESAI_MEM>,
-						 <&clks IMX6SX_CLK_ESAI_EXTAL>,
-						 <&clks IMX6SX_CLK_ESAI_IPG>,
-						 <&clks IMX6SX_CLK_SPBA>;
-					clock-names = "core", "mem", "extal",
-						      "fsys", "spba";
-					status = "disabled";
-				};
-
-				ssi1: ssi@02028000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
-					reg = <0x02028000 0x4000>;
-					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_SSI1_IPG>,
-						 <&clks IMX6SX_CLK_SSI1>;
-					clock-names = "ipg", "baud";
-					dmas = <&sdma 37 1 0>, <&sdma 38 1 0>;
-					dma-names = "rx", "tx";
-					fsl,fifo-depth = <15>;
-					status = "disabled";
-				};
-
-				ssi2: ssi@0202c000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
-					reg = <0x0202c000 0x4000>;
-					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_SSI2_IPG>,
-						 <&clks IMX6SX_CLK_SSI2>;
-					clock-names = "ipg", "baud";
-					dmas = <&sdma 41 1 0>, <&sdma 42 1 0>;
-					dma-names = "rx", "tx";
-					fsl,fifo-depth = <15>;
-					status = "disabled";
-				};
-
-				ssi3: ssi@02030000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
-					reg = <0x02030000 0x4000>;
-					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_SSI3_IPG>,
-						 <&clks IMX6SX_CLK_SSI3>;
-					clock-names = "ipg", "baud";
-					dmas = <&sdma 45 1 0>, <&sdma 46 1 0>;
-					dma-names = "rx", "tx";
-					fsl,fifo-depth = <15>;
-					status = "disabled";
-				};
-
-				asrc: asrc@02034000 {
-					reg = <0x02034000 0x4000>;
-					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_ASRC_MEM>,
-						 <&clks IMX6SX_CLK_ASRC_IPG>,
-						 <&clks IMX6SX_CLK_SPDIF>,
-						 <&clks IMX6SX_CLK_SPBA>;
-					clock-names = "mem", "ipg", "asrck", "spba";
-					dmas = <&sdma 17 20 1>, <&sdma 18 20 1>,
-					       <&sdma 19 20 1>, <&sdma 20 20 1>,
-					       <&sdma 21 20 1>, <&sdma 22 20 1>;
-					dma-names = "rxa", "rxb", "rxc",
-						    "txa", "txb", "txc";
-					status = "okay";
-				};
-			};
-
-			pwm1: pwm@02080000 {
-				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
-				reg = <0x02080000 0x4000>;
-				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_PWM1>,
-					 <&clks IMX6SX_CLK_PWM1>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-			};
-
-			pwm2: pwm@02084000 {
-				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
-				reg = <0x02084000 0x4000>;
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_PWM2>,
-					 <&clks IMX6SX_CLK_PWM2>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-			};
-
-			pwm3: pwm@02088000 {
-				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
-				reg = <0x02088000 0x4000>;
-				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_PWM3>,
-					 <&clks IMX6SX_CLK_PWM3>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-			};
-
-			pwm4: pwm@0208c000 {
-				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
-				reg = <0x0208c000 0x4000>;
-				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_PWM4>,
-					 <&clks IMX6SX_CLK_PWM4>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-			};
-
-			flexcan1: can@02090000 {
-				compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
-				reg = <0x02090000 0x4000>;
-				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_CAN1_IPG>,
-					 <&clks IMX6SX_CLK_CAN1_SERIAL>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			flexcan2: can@02094000 {
-				compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
-				reg = <0x02094000 0x4000>;
-				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_CAN2_IPG>,
-					 <&clks IMX6SX_CLK_CAN2_SERIAL>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			gpt: gpt@02098000 {
-				compatible = "fsl,imx6sx-gpt", "fsl,imx31-gpt";
-				reg = <0x02098000 0x4000>;
-				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_GPT_BUS>,
-					 <&clks IMX6SX_CLK_GPT_3M>;
-				clock-names = "ipg", "per";
-			};
-
-			gpio1: gpio@0209c000 {
-				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
-				reg = <0x0209c000 0x4000>;
-				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 5 26>;
-			};
-
-			gpio2: gpio@020a0000 {
-				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
-				reg = <0x020a0000 0x4000>;
-				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 31 20>;
-			};
-
-			gpio3: gpio@020a4000 {
-				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
-				reg = <0x020a4000 0x4000>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 51 29>;
-			};
-
-			gpio4: gpio@020a8000 {
-				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
-				reg = <0x020a8000 0x4000>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 80 32>;
-			};
-
-			gpio5: gpio@020ac000 {
-				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
-				reg = <0x020ac000 0x4000>;
-				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 112 24>;
-			};
-
-			gpio6: gpio@020b0000 {
-				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
-				reg = <0x020b0000 0x4000>;
-				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 136 12>, <&iomuxc 12 158 11>;
-			};
-
-			gpio7: gpio@020b4000 {
-				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
-				reg = <0x020b4000 0x4000>;
-				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>;
-			};
-
-			kpp: kpp@020b8000 {
-				compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp";
-				reg = <0x020b8000 0x4000>;
-				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_DUMMY>;
-				status = "disabled";
-			};
-
-			wdog1: wdog@020bc000 {
-				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
-				reg = <0x020bc000 0x4000>;
-				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_DUMMY>;
-			};
-
-			wdog2: wdog@020c0000 {
-				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
-				reg = <0x020c0000 0x4000>;
-				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_DUMMY>;
-				status = "disabled";
-			};
-
-			clks: ccm@020c4000 {
-				compatible = "fsl,imx6sx-ccm";
-				reg = <0x020c4000 0x4000>;
-				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-				#clock-cells = <1>;
-				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
-				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
-			};
-
-			anatop: anatop@020c8000 {
-				compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop",
-					     "syscon", "simple-bus";
-				reg = <0x020c8000 0x1000>;
-				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-
-				regulator-1p1 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd1p1";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1375000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x110>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <4>;
-					anatop-min-voltage = <800000>;
-					anatop-max-voltage = <1375000>;
-					anatop-enable-bit = <0>;
-				};
-
-				regulator-3p0 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd3p0";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <3150000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x120>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <0>;
-					anatop-min-voltage = <2625000>;
-					anatop-max-voltage = <3400000>;
-					anatop-enable-bit = <0>;
-				};
-
-				regulator-2p5 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd2p5";
-					regulator-min-microvolt = <2100000>;
-					regulator-max-microvolt = <2875000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x130>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <0>;
-					anatop-min-voltage = <2100000>;
-					anatop-max-voltage = <2875000>;
-					anatop-enable-bit = <0>;
-				};
-
-				reg_arm: regulator-vddcore {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vddarm";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <0>;
-					anatop-vol-bit-width = <5>;
-					anatop-delay-reg-offset = <0x170>;
-					anatop-delay-bit-shift = <24>;
-					anatop-delay-bit-width = <2>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-
-				reg_pcie: regulator-vddpcie {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vddpcie";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <9>;
-					anatop-vol-bit-width = <5>;
-					anatop-delay-reg-offset = <0x170>;
-					anatop-delay-bit-shift = <26>;
-					anatop-delay-bit-width = <2>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-
-				reg_soc: regulator-vddsoc {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vddsoc";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <18>;
-					anatop-vol-bit-width = <5>;
-					anatop-delay-reg-offset = <0x170>;
-					anatop-delay-bit-shift = <28>;
-					anatop-delay-bit-width = <2>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-			};
-
-			tempmon: tempmon {
-				compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
-				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-				fsl,tempmon = <&anatop>;
-				fsl,tempmon-data = <&ocotp>;
-				clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
-			};
-
-			usbphy1: usbphy@020c9000 {
-				compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
-				reg = <0x020c9000 0x1000>;
-				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_USBPHY1>;
-				fsl,anatop = <&anatop>;
-			};
-
-			usbphy2: usbphy@020ca000 {
-				compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
-				reg = <0x020ca000 0x1000>;
-				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_USBPHY2>;
-				fsl,anatop = <&anatop>;
-			};
-
-			snvs: snvs@020cc000 {
-				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
-				reg = <0x020cc000 0x4000>;
-
-				snvs_rtc: snvs-rtc-lp {
-					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					regmap = <&snvs>;
-					offset = <0x34>;
-					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				snvs_poweroff: snvs-poweroff {
-					compatible = "syscon-poweroff";
-					regmap = <&snvs>;
-					offset = <0x38>;
-					mask = <0x60>;
-					status = "disabled";
-				};
-
-				snvs_pwrkey: snvs-powerkey {
-					compatible = "fsl,sec-v4.0-pwrkey";
-					regmap = <&snvs>;
-					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-					linux,keycode = <KEY_POWER>;
-					wakeup-source;
-				};
-			};
-
-			epit1: epit@020d0000 {
-				reg = <0x020d0000 0x4000>;
-				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			epit2: epit@020d4000 {
-				reg = <0x020d4000 0x4000>;
-				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			src: src@020d8000 {
-				compatible = "fsl,imx6sx-src", "fsl,imx51-src";
-				reg = <0x020d8000 0x4000>;
-				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-				#reset-cells = <1>;
-			};
-
-			gpc: gpc@020dc000 {
-				compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc";
-				reg = <0x020dc000 0x4000>;
-				interrupt-controller;
-				#interrupt-cells = <3>;
-				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-parent = <&intc>;
-			};
-
-			iomuxc: iomuxc@020e0000 {
-				compatible = "fsl,imx6sx-iomuxc";
-				reg = <0x020e0000 0x4000>;
-			};
-
-			gpr: iomuxc-gpr@020e4000 {
-				compatible = "fsl,imx6sx-iomuxc-gpr",
-					     "fsl,imx6q-iomuxc-gpr", "syscon";
-				reg = <0x020e4000 0x4000>;
-			};
-
-			sdma: sdma@020ec000 {
-				compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma";
-				reg = <0x020ec000 0x4000>;
-				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_SDMA>,
-					 <&clks IMX6SX_CLK_SDMA>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <3>;
-				/* imx6sx reuses imx6q sdma firmware */
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
-			};
-		};
-
-		aips2: aips-bus@02100000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02100000 0x100000>;
-			ranges;
-
-			crypto: caam@2100000 {
-				compatible = "fsl,sec-v4.0";
-				fsl,sec-era = <4>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x2100000 0x10000>;
-				ranges = <0 0x2100000 0x10000>;
-				interrupt-parent = <&intc>;
-				clocks = <&clks IMX6SX_CLK_CAAM_MEM>,
-					 <&clks IMX6SX_CLK_CAAM_ACLK>,
-					 <&clks IMX6SX_CLK_CAAM_IPG>,
-					 <&clks IMX6SX_CLK_EIM_SLOW>;
-				clock-names = "mem", "aclk", "ipg", "emi_slow";
-
-				sec_jr0: jr0@1000 {
-					compatible = "fsl,sec-v4.0-job-ring";
-					reg = <0x1000 0x1000>;
-					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				sec_jr1: jr1@2000 {
-					compatible = "fsl,sec-v4.0-job-ring";
-					reg = <0x2000 0x1000>;
-					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-				};
-			};
-
-			usbotg1: usb@02184000 {
-				compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
-				reg = <0x02184000 0x200>;
-				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_USBOH3>;
-				fsl,usbphy = <&usbphy1>;
-				fsl,usbmisc = <&usbmisc 0>;
-				fsl,anatop = <&anatop>;
-				ahb-burst-config = <0x0>;
-				tx-burst-size-dword = <0x10>;
-				rx-burst-size-dword = <0x10>;
-				status = "disabled";
-			};
-
-			usbotg2: usb@02184200 {
-				compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
-				reg = <0x02184200 0x200>;
-				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_USBOH3>;
-				fsl,usbphy = <&usbphy2>;
-				fsl,usbmisc = <&usbmisc 1>;
-				ahb-burst-config = <0x0>;
-				tx-burst-size-dword = <0x10>;
-				rx-burst-size-dword = <0x10>;
-				status = "disabled";
-			};
-
-			usbh: usb@02184400 {
-				compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
-				reg = <0x02184400 0x200>;
-				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_USBOH3>;
-				fsl,usbmisc = <&usbmisc 2>;
-				phy_type = "hsic";
-				fsl,anatop = <&anatop>;
-				dr_mode = "host";
-				ahb-burst-config = <0x0>;
-				tx-burst-size-dword = <0x10>;
-				rx-burst-size-dword = <0x10>;
-				status = "disabled";
-			};
-
-			usbmisc: usbmisc@02184800 {
-				#index-cells = <1>;
-				compatible = "fsl,imx6sx-usbmisc", "fsl,imx6q-usbmisc";
-				reg = <0x02184800 0x200>;
-				clocks = <&clks IMX6SX_CLK_USBOH3>;
-			};
-
-			fec1: ethernet@02188000 {
-				compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
-				reg = <0x02188000 0x4000>;
-				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_ENET>,
-					 <&clks IMX6SX_CLK_ENET_AHB>,
-					 <&clks IMX6SX_CLK_ENET_PTP>,
-					 <&clks IMX6SX_CLK_ENET_REF>,
-					 <&clks IMX6SX_CLK_ENET_PTP>;
-				clock-names = "ipg", "ahb", "ptp",
-					      "enet_clk_ref", "enet_out";
-				fsl,num-tx-queues=<3>;
-				fsl,num-rx-queues=<3>;
-				status = "disabled";
-			};
-
-			mlb: mlb@0218c000 {
-				reg = <0x0218c000 0x4000>;
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_MLB>;
-				status = "disabled";
-			};
-
-			usdhc1: usdhc@02190000 {
-				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x02190000 0x4000>;
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_USDHC1>,
-					 <&clks IMX6SX_CLK_USDHC1>,
-					 <&clks IMX6SX_CLK_USDHC1>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc2: usdhc@02194000 {
-				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x02194000 0x4000>;
-				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_USDHC2>,
-					 <&clks IMX6SX_CLK_USDHC2>,
-					 <&clks IMX6SX_CLK_USDHC2>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc3: usdhc@02198000 {
-				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x02198000 0x4000>;
-				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_USDHC3>,
-					 <&clks IMX6SX_CLK_USDHC3>,
-					 <&clks IMX6SX_CLK_USDHC3>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc4: usdhc@0219c000 {
-				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x0219c000 0x4000>;
-				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_USDHC4>,
-					 <&clks IMX6SX_CLK_USDHC4>,
-					 <&clks IMX6SX_CLK_USDHC4>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@021a0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
-				reg = <0x021a0000 0x4000>;
-				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_I2C1>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@021a4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
-				reg = <0x021a4000 0x4000>;
-				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_I2C2>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@021a8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
-				reg = <0x021a8000 0x4000>;
-				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_I2C3>;
-				status = "disabled";
-			};
-
-			mmdc: mmdc@021b0000 {
-				compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc";
-				reg = <0x021b0000 0x4000>;
-			};
-
-			fec2: ethernet@021b4000 {
-				compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
-				reg = <0x021b4000 0x4000>;
-				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_ENET>,
-					 <&clks IMX6SX_CLK_ENET_AHB>,
-					 <&clks IMX6SX_CLK_ENET_PTP>,
-					 <&clks IMX6SX_CLK_ENET2_REF_125M>,
-					 <&clks IMX6SX_CLK_ENET_PTP>;
-				clock-names = "ipg", "ahb", "ptp",
-					      "enet_clk_ref", "enet_out";
-				status = "disabled";
-			};
-
-			weim: weim@021b8000 {
-				#address-cells = <2>;
-				#size-cells = <1>;
-				compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
-				reg = <0x021b8000 0x4000>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_EIM_SLOW>;
-				fsl,weim-cs-gpr = <&gpr>;
-				status = "disabled";
-			};
-
-			ocotp: ocotp@021bc000 {
-				compatible = "fsl,imx6sx-ocotp", "syscon";
-				reg = <0x021bc000 0x4000>;
-				clocks = <&clks IMX6SX_CLK_OCOTP>;
-			};
-
-			sai1: sai@021d4000 {
-				compatible = "fsl,imx6sx-sai";
-				reg = <0x021d4000 0x4000>;
-				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_SAI1_IPG>,
-					 <&clks IMX6SX_CLK_SAI1>,
-					 <&clks 0>, <&clks 0>;
-				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dma-names = "rx", "tx";
-				dmas = <&sdma 31 24 0>, <&sdma 32 24 0>;
-				status = "disabled";
-			};
-
-			audmux: audmux@021d8000 {
-				compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux";
-				reg = <0x021d8000 0x4000>;
-				status = "disabled";
-			};
-
-			sai2: sai@021dc000 {
-				compatible = "fsl,imx6sx-sai";
-				reg = <0x021dc000 0x4000>;
-				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_SAI2_IPG>,
-					 <&clks IMX6SX_CLK_SAI2>,
-					 <&clks 0>, <&clks 0>;
-				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dma-names = "rx", "tx";
-				dmas = <&sdma 33 24 0>, <&sdma 34 24 0>;
-				status = "disabled";
-			};
-
-			qspi1: qspi@021e0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6sx-qspi";
-				reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
-				reg-names = "QuadSPI", "QuadSPI-memory";
-				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_QSPI1>,
-					 <&clks IMX6SX_CLK_QSPI1>;
-				clock-names = "qspi_en", "qspi";
-				status = "disabled";
-			};
-
-			qspi2: qspi@021e4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6sx-qspi";
-				reg = <0x021e4000 0x4000>, <0x70000000 0x10000000>;
-				reg-names = "QuadSPI", "QuadSPI-memory";
-				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_QSPI2>,
-					 <&clks IMX6SX_CLK_QSPI2>;
-				clock-names = "qspi_en", "qspi";
-				status = "disabled";
-			};
-
-			uart2: serial@021e8000 {
-				compatible = "fsl,imx6sx-uart",
-					     "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021e8000 0x4000>;
-				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_UART_IPG>,
-					 <&clks IMX6SX_CLK_UART_SERIAL>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			uart3: serial@021ec000 {
-				compatible = "fsl,imx6sx-uart",
-					     "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021ec000 0x4000>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_UART_IPG>,
-					 <&clks IMX6SX_CLK_UART_SERIAL>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			uart4: serial@021f0000 {
-				compatible = "fsl,imx6sx-uart",
-					     "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021f0000 0x4000>;
-				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_UART_IPG>,
-					 <&clks IMX6SX_CLK_UART_SERIAL>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			uart5: serial@021f4000 {
-				compatible = "fsl,imx6sx-uart",
-					     "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021f4000 0x4000>;
-				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_UART_IPG>,
-					 <&clks IMX6SX_CLK_UART_SERIAL>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			i2c4: i2c@021f8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
-				reg = <0x021f8000 0x4000>;
-				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_I2C4>;
-				status = "disabled";
-			};
-		};
-
-		aips3: aips-bus@02200000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02200000 0x100000>;
-			ranges;
-
-			spba-bus@02200000 {
-				compatible = "fsl,spba-bus", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x02240000 0x40000>;
-				ranges;
-
-				csi1: csi@02214000 {
-					reg = <0x02214000 0x4000>;
-					interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
-						 <&clks IMX6SX_CLK_CSI>,
-						 <&clks IMX6SX_CLK_DCIC1>;
-					clock-names = "disp-axi", "csi_mclk", "dcic";
-					status = "disabled";
-				};
-
-				pxp: pxp@02218000 {
-					reg = <0x02218000 0x4000>;
-					interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_PXP_AXI>,
-						 <&clks IMX6SX_CLK_DISPLAY_AXI>;
-					clock-names = "pxp-axi", "disp-axi";
-					status = "disabled";
-				};
-
-				csi2: csi@0221c000 {
-					reg = <0x0221c000 0x4000>;
-					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
-						 <&clks IMX6SX_CLK_CSI>,
-						 <&clks IMX6SX_CLK_DCIC2>;
-					clock-names = "disp-axi", "csi_mclk", "dcic";
-					status = "disabled";
-				};
-
-				lcdif1: lcdif@02220000 {
-					compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
-					reg = <0x02220000 0x4000>;
-					interrupts = <GIC_SPI 5 IRQ_TYPE_EDGE_RISING>;
-					clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
-						 <&clks IMX6SX_CLK_LCDIF_APB>,
-						 <&clks IMX6SX_CLK_DISPLAY_AXI>;
-					clock-names = "pix", "axi", "disp_axi";
-					status = "disabled";
-				};
-
-				lcdif2: lcdif@02224000 {
-					compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
-					reg = <0x02224000 0x4000>;
-					interrupts = <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>;
-					clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>,
-						 <&clks IMX6SX_CLK_LCDIF_APB>,
-						 <&clks IMX6SX_CLK_DISPLAY_AXI>;
-					clock-names = "pix", "axi", "disp_axi";
-					status = "disabled";
-				};
-
-				vadc: vadc@02228000 {
-					reg = <0x02228000 0x4000>, <0x0222c000 0x4000>;
-					reg-names = "vadc-vafe", "vadc-vdec";
-					clocks = <&clks IMX6SX_CLK_VADC>,
-						 <&clks IMX6SX_CLK_CSI>;
-					clock-names = "vadc", "csi";
-					status = "disabled";
-				};
-			};
-
-			adc1: adc@02280000 {
-				compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
-				reg = <0x02280000 0x4000>;
-				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_IPG>;
-				clock-names = "adc";
-				fsl,adck-max-frequency = <30000000>, <40000000>,
-							 <20000000>;
-				status = "disabled";
-			};
-
-			adc2: adc@02284000 {
-				compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
-				reg = <0x02284000 0x4000>;
-				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_IPG>;
-				clock-names = "adc";
-				fsl,adck-max-frequency = <30000000>, <40000000>,
-							 <20000000>;
-				status = "disabled";
-			};
-
-			wdog3: wdog@02288000 {
-				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
-				reg = <0x02288000 0x4000>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_DUMMY>;
-				status = "disabled";
-			};
-
-			ecspi5: ecspi@0228c000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
-				reg = <0x0228c000 0x4000>;
-				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_ECSPI5>,
-					 <&clks IMX6SX_CLK_ECSPI5>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart6: serial@022a0000 {
-				compatible = "fsl,imx6sx-uart",
-					     "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x022a0000 0x4000>;
-				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_UART_IPG>,
-					 <&clks IMX6SX_CLK_UART_SERIAL>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma 0 4 0>, <&sdma 47 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			pwm5: pwm@022a4000 {
-				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
-				reg = <0x022a4000 0x4000>;
-				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_PWM5>,
-					 <&clks IMX6SX_CLK_PWM5>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-			};
-
-			pwm6: pwm@022a8000 {
-				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
-				reg = <0x022a8000 0x4000>;
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_PWM6>,
-					 <&clks IMX6SX_CLK_PWM6>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-			};
-
-			pwm7: pwm@022ac000 {
-				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
-				reg = <0x022ac000 0x4000>;
-				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_PWM7>,
-					 <&clks IMX6SX_CLK_PWM7>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-			};
-
-			pwm8: pwm@0022b0000 {
-				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
-				reg = <0x0022b0000 0x4000>;
-				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6SX_CLK_PWM8>,
-					 <&clks IMX6SX_CLK_PWM8>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-			};
-		};
-
-		pcie: pcie@8ffc000 {
-			compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";
-			reg = <0x08ffc000 0x4000>; /* DBI */
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-				  /* configuration space */
-			ranges = <0x00000800 0 0x08f00000 0x08f00000 0 0x00080000
-				  /* downstream I/O */
-				  0x81000000 0 0          0x08f80000 0 0x00010000
-				  /* non-prefetchable memory */
-				  0x82000000 0 0x08000000 0x08000000 0 0x00f00000>;
-			bus-range = <0x00 0xff>;
-			num-lanes = <1>;
-			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks IMX6SX_CLK_PCIE_REF_125M>,
-				 <&clks IMX6SX_CLK_PCIE_AXI>,
-				 <&clks IMX6SX_CLK_LVDS1_OUT>,
-				 <&clks IMX6SX_CLK_DISPLAY_AXI>;
-			clock-names = "pcie_ref_125m", "pcie_axi",
-				      "lvds_gate", "display_axi";
-			status = "disabled";
-		};
-	};
-
-	gpu-subsystem {
-		compatible = "fsl,imx-gpu-subsystem";
-		cores = <&gpu>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
deleted file mode 100644
index d2be8aa3370b..000000000000
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts
+++ /dev/null
@@ -1,508 +0,0 @@
-/*
- * Copyright (C) 2015 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "imx6ul.dtsi"
-
-/ {
-	model = "Freescale i.MX6 UltraLite 14x14 EVK Board";
-	compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		status = "okay";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_sd1_vmmc: sd1_regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "VSD_3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "mx6ul-wm8960";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink_master>;
-		simple-audio-card,frame-master = <&dailink_master>;
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Line", "Line In",
-			"Line", "Line Out",
-			"Speaker", "Speaker",
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"Headphone Jack", "HP_L",
-			"Headphone Jack", "HP_R",
-			"Speaker", "SPK_LP",
-			"Speaker", "SPK_LN",
-			"Speaker", "SPK_RP",
-			"Speaker", "SPK_RN",
-			"LINPUT1", "Mic Jack",
-			"LINPUT3", "Mic Jack",
-			"RINPUT1", "Mic Jack",
-			"RINPUT2", "Mic Jack";
-
-		simple-audio-card,cpu {
-			sound-dai = <&sai2>;
-		};
-
-		dailink_master: simple-audio-card,codec {
-			sound-dai = <&codec>;
-			clocks = <&clks IMX6UL_CLK_SAI2>;
-		};
-	};
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
-	assigned-clock-rates = <786432000>;
-};
-
-&i2c2 {
-	clock_frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	codec: wm8960@1a {
-		#sound-dai-cells = <0>;
-		compatible = "wlf,wm8960";
-		reg = <0x1a>;
-		wlf,shared-lrclk;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	status = "okay";
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@2 {
-			reg = <2>;
-			micrel,led-mode = <1>;
-			clocks = <&clks IMX6UL_CLK_ENET_REF>;
-			clock-names = "rmii-ref";
-		};
-
-		ethphy1: ethernet-phy@1 {
-			reg = <1>;
-			micrel,led-mode = <1>;
-			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
-			clock-names = "rmii-ref";
-		};
-	};
-};
-
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif_dat
-		     &pinctrl_lcdif_ctrl>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display {
-		bits-per-pixel = <16>;
-		bus-width = <24>;
-
-		display-timings {
-			native-mode = <&timing0>;
-
-			timing0: timing0 {
-				clock-frequency = <9200000>;
-				hactive = <480>;
-				vactive = <272>;
-				hfront-porch = <8>;
-				hback-porch = <4>;
-				hsync-len = <41>;
-				vback-porch = <2>;
-				vfront-porch = <4>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&qspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_qspi>;
-	status = "okay";
-
-	flash0: n25q256a@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q256a";
-		spi-max-frequency = <29000000>;
-		reg = <0>;
-	};
-};
-
-&sai2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai2>;
-	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
-			  <&clks IMX6UL_CLK_SAI2>;
-	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
-	assigned-clock-rates = <0>, <12288000>;
-	fsl,sai-mclk-direction-output;
-	status = "okay";
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&tsc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_tsc>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
-	measure-delay-time = <0xffff>;
-	pre-charge-time = <0xfff>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbotg1 {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbphy1 {
-	fsl,tx-d-cal = <106>;
-};
-
-&usbphy2 {
-	fsl,tx-d-cal = <106>;
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_sd1_vmmc>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-
-	pinctrl_csi1: csi1grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_MCLK__CSI_MCLK		0x1b088
-			MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK	0x1b088
-			MX6UL_PAD_CSI_VSYNC__CSI_VSYNC		0x1b088
-			MX6UL_PAD_CSI_HSYNC__CSI_HSYNC		0x1b088
-			MX6UL_PAD_CSI_DATA00__CSI_DATA02	0x1b088
-			MX6UL_PAD_CSI_DATA01__CSI_DATA03	0x1b088
-			MX6UL_PAD_CSI_DATA02__CSI_DATA04	0x1b088
-			MX6UL_PAD_CSI_DATA03__CSI_DATA05	0x1b088
-			MX6UL_PAD_CSI_DATA04__CSI_DATA06	0x1b088
-			MX6UL_PAD_CSI_DATA05__CSI_DATA07	0x1b088
-			MX6UL_PAD_CSI_DATA06__CSI_DATA08	0x1b088
-			MX6UL_PAD_CSI_DATA07__CSI_DATA09	0x1b088
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
-			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
-			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x17059
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp{
-		fsl,pins = <
-			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
-			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp{
-		fsl,pins = <
-			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
-			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
-			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
-			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
-		>;
-	};
-
-	pinctrl_lcdif_dat: lcdifdatgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
-			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18  0x79
-			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19  0x79
-			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20  0x79
-			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21  0x79
-			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22  0x79
-			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23  0x79
-		>;
-	};
-
-	pinctrl_lcdif_ctrl: lcdifctrlgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
-			/* used for lcd reset */
-			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09  0x79
-		>;
-	};
-
-	pinctrl_qspi: qspigrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK	0x70a1
-			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00	0x70a1
-			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01	0x70a1
-			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02	0x70a1
-			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03	0x70a1
-			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B	0x70a1
-		>;
-	};
-
-	pinctrl_sai2: sai2grp {
-		fsl,pins = <
-			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
-			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
-			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
-			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
-			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
-			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x17059
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO08__PWM1_OUT   0x110b0
-		>;
-	};
-
-	pinctrl_sim2: sim2grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD		0xb808
-			MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK		0x31
-			MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B		0xb808
-			MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN		0xb808
-			MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD		0xb809
-			MX6UL_PAD_CSI_DATA02__GPIO4_IO23		0x3008
-		>;
-	};
-
-	pinctrl_tsc: tscgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01		0xb0
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02		0xb0
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03		0xb0
-			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04		0xb0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
-			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x1b0b1
-			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD     	0x17059
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK     	0x10059
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 	0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 	0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 	0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 	0x17059
-			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19       0x17059 /* SD1 CD */
-			MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT    0x17059 /* SD1 VSELECT */
-			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x17059 /* SD1 RESET */
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
-
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x17059
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-geam-kit.dts b/arch/arm/boot/dts/imx6ul-geam-kit.dts
deleted file mode 100644
index 142e60cab65f..000000000000
--- a/arch/arm/boot/dts/imx6ul-geam-kit.dts
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6ul-geam.dtsi"
-
-/ {
-	model = "Engicam GEAM6UL";
-	compatible = "engicam,imx6ul-geam", "fsl,imx6ul";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "okay";
-};
-
-&lcdif {
-	display = <&display0>;
-	status = "okay";
-
-	display0: display {
-		bits-per-pixel = <16>;
-		bus-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <28000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <30>;
-				hback-porch = <30>;
-				hsync-len = <64>;
-				vback-porch = <5>;
-				vfront-porch = <5>;
-				vsync-len = <20>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	status = "okay";
-};
-
-&tsc {
-	measure-delay-time = <0x1ffff>;
-	pre-charge-time = <0x1fff>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ul-geam.dtsi b/arch/arm/boot/dts/imx6ul-geam.dtsi
deleted file mode 100644
index eb94d956808b..000000000000
--- a/arch/arm/boot/dts/imx6ul-geam.dtsi
+++ /dev/null
@@ -1,406 +0,0 @@
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx6ul.dtsi"
-
-/ {
-	memory {
-		reg = <0x80000000 0x08000000>;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm8 0 100000>;
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <100>;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_3p3v>;
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_3p3v>;
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	status = "okay";
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-		};
-
-		ethphy1: ethernet-phy@1 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <1>;
-		};
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock_frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif_dat
-		     &pinctrl_lcdif_ctrl>;
-	display = <&display0>;
-};
-
-&pwm8 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm8>;
-	status = "okay";
-};
-
-&tsc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_tsc>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
-};
-
-&sai2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai2>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbotg1 {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	bus-width = <4>;
-	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
-			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0		/* ENET_nRST */
-			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
-			MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2	0x4001b031
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
-			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
-			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpmi-nand {
-		fsl,pins = <
-			MX6UL_PAD_NAND_CLE__RAWNAND_CLE         0xb0b1
-			MX6UL_PAD_NAND_ALE__RAWNAND_ALE         0xb0b1
-			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B       0xb0b1
-			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
-			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B     0xb0b1
-			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B       0xb0b1
-			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B       0xb0b1
-			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00   0xb0b1
-			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01   0xb0b1
-			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02   0xb0b1
-			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03   0xb0b1
-			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04   0xb0b1
-			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05   0xb0b1
-			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06   0xb0b1
-			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07   0xb0b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
-			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
-			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
-		>;
-	};
-
-	pinctrl_lcdif_ctrl: lcdifctrlgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
-		>;
-	};
-
-	pinctrl_lcdif_dat: lcdifdatgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
-		>;
-	};
-
-	pinctrl_pwm8: pwm8grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_ER__PWM8_OUT   0x110b0
-		>;
-	};
-
-	pinctrl_tsc: tscgrp {
-		fsl,pin = <
-			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
-			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0xb0
-		>;
-	};
-
-	pinctrl_sai2: sai2grp {
-		fsl,pins = <
-			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x130b0
-			MX6UL_PAD_JTAG_TMS__CCM_CLKO1		0x4001b031
-			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
-			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
-			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x120b0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
-			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x1b0b1
-			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10059
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK     0x17070
-			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD     0x10070
-			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0  0x17070
-			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1  0x17070
-			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2  0x17070
-			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3  0x17070
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-isiot-common.dtsi b/arch/arm/boot/dts/imx6ul-isiot-common.dtsi
deleted file mode 100644
index 2beaab6e272e..000000000000
--- a/arch/arm/boot/dts/imx6ul-isiot-common.dtsi
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-&i2c1 {
-	stmpe811: gpio-expander@44 {
-		compatible = "st,stmpe811";
-		reg = <0x44>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_stmpe>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		stmpe: touchscreen {
-			compatible = "st,stmpe-ts";
-			st,sample-time = <4>;
-			st,mod-12b = <1>;
-			st,ref-sel = <0>;
-			st,adc-freq = <1>;
-			st,ave-ctrl = <1>;
-			st,touch-det-delay = <2>;
-			st,settling = <2>;
-			st,fraction-z = <7>;
-			st,i-drive = <1>;
-		};
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif_dat
-		     &pinctrl_lcdif_ctrl>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display {
-		bits-per-pixel = <16>;
-		bus-width = <18>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <28000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <30>;
-				hback-porch = <30>;
-				hsync-len = <64>;
-				vback-porch = <5>;
-				vfront-porch = <5>;
-				vsync-len = <20>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl_lcdif_ctrl: lcdifctrlgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
-		>;
-	};
-
-	pinctrl_lcdif_dat: lcdifdatgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
-		>;
-	};
-
-	pinctrl_stmpe: stmpegrp  {
-		fsl,pins = <
-			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
deleted file mode 100644
index 73a1d0f0b9d5..000000000000
--- a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6ul-isiot.dtsi"
-#include "imx6ul-isiot-common.dtsi"
-
-/ {
-	model = "Engicam Is.IoT MX6UL eMMC Starter kit";
-	compatible = "engicam,imx6ul-isiot", "fsl,imx6ul";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
-	bus-width = <8>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK      0x17070
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD      0x10070
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0  0x17070
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1  0x17070
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2  0x17070
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3  0x17070
-			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4  0x17070
-			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5  0x17070
-			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6  0x17070
-			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7  0x17070
-			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B   0x17070
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-isiot-nand.dts b/arch/arm/boot/dts/imx6ul-isiot-nand.dts
deleted file mode 100644
index da29a86eb6a8..000000000000
--- a/arch/arm/boot/dts/imx6ul-isiot-nand.dts
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6ul-isiot.dtsi"
-#include "imx6ul-isiot-common.dtsi"
-
-/ {
-	model = "Engicam Is.IoT MX6UL NAND Starter kit";
-	compatible = "engicam,imx6ul-isiot", "fsl,imx6ul";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_gpmi_nand: gpmi-nand {
-		fsl,pins = <
-			MX6UL_PAD_NAND_CLE__RAWNAND_CLE         0xb0b1
-			MX6UL_PAD_NAND_ALE__RAWNAND_ALE         0xb0b1
-			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B       0xb0b1
-			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
-			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B     0xb0b1
-			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B       0xb0b1
-			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B       0xb0b1
-			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00   0xb0b1
-			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01   0xb0b1
-			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02   0xb0b1
-			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03   0xb0b1
-			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04   0xb0b1
-			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05   0xb0b1
-			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06   0xb0b1
-			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07   0xb0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi
deleted file mode 100644
index ea30380ad7a4..000000000000
--- a/arch/arm/boot/dts/imx6ul-isiot.dtsi
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx6ul.dtsi"
-
-/ {
-	memory {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm8 0 100000>;
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <100>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock_frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&pwm8 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm8>;
-	status = "okay";
-};
-
-&sai2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai2>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
-			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0
-			MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b0
-		>;
-	};
-
-	pinctrl_pwm8: pwm8grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_ER__PWM8_OUT   0x110b0
-		>;
-	};
-
-	pinctrl_sai2: sai2grp {
-		fsl,pins = <
-			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x130b0
-			MX6UL_PAD_JTAG_TMS__CCM_CLKO1		0x4001b031
-			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
-			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
-			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x120b0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10059
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi
deleted file mode 100644
index aec5ccce0321..000000000000
--- a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * Copyright 2017 Armadeus Systems <support@armadeus.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "imx6ul.dtsi"
-
-/ {
-	memory {
-		reg = <0x80000000 0>; /* will be filled by U-Boot */
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	usdhc3_pwrseq: usdhc3-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rmii";
-	phy-reset-duration = <1>;
-	phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
-	phy-handle = <&ethphy1>;
-	phy-supply = <&reg_3v3>;
-	status = "okay";
-
-	mdio: mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@1 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <1>;
-			interrupt-parent = <&gpio4>;
-			interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-			status = "okay";
-		};
-	};
-};
-
-/* Bluetooth */
-&uart8 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart8>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-/* eMMC */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	status = "okay";
-};
-
-/* WiFi */
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	no-1-8-v;
-	non-removable;
-	mmc-pwrseq = <&usdhc3_pwrseq>;
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	brcmf: wifi@1 {
-		compatible = "brcm,bcm4329-fmac";
-		reg = <1>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "host-wake";
-	};
-};
-
-&iomuxc {
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
-			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
-			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x130b0
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x130b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x130b0
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x130b0
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
-			/* INT# */
-			MX6UL_PAD_NAND_DQS__GPIO4_IO16		0x1b0b0
-			/* RST# */
-			MX6UL_PAD_NAND_DATA00__GPIO4_IO02	0x130b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
-		>;
-	};
-
-	pinctrl_uart8: uart8grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS	0x1b0b0
-			MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS	0x1b0b0
-			/* BT_REG_ON */
-			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x130b0
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
-			MX6UL_PAD_NAND_READY_B__USDHC1_DATA4	0x17059
-			MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5	0x17059
-			MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6	0x17059
-			MX6UL_PAD_NAND_CLE__USDHC1_DATA7	0x17059
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA18__USDHC2_CMD	0x1b0b0
-			MX6UL_PAD_LCD_DATA19__USDHC2_CLK	0x100b0
-			MX6UL_PAD_LCD_DATA20__USDHC2_DATA0	0x1b0b0
-			MX6UL_PAD_LCD_DATA21__USDHC2_DATA1	0x1b0b0
-			MX6UL_PAD_LCD_DATA22__USDHC2_DATA2	0x1b0b0
-			MX6UL_PAD_LCD_DATA23__USDHC2_DATA3	0x1b0b0
-			/* WL_REG_ON */
-			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x130b0
-			/* WL_IRQ */
-			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-opos6uldev.dts b/arch/arm/boot/dts/imx6ul-opos6uldev.dts
deleted file mode 100644
index 0e59ee57fd55..000000000000
--- a/arch/arm/boot/dts/imx6ul-opos6uldev.dts
+++ /dev/null
@@ -1,412 +0,0 @@
-/*
- * Copyright 2017 Armadeus Systems <support@armadeus.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6ul-opos6ul.dtsi"
-
-/ {
-	model = "Armadeus Systems OPOS6UL SoM on OPOS6ULDev board";
-	compatible = "armadeus,opos6uldev", "armadeus,opos6ul", "fsl,imx6ul";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 191000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_5v>;
-		status = "okay";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		user-button {
-			label = "User button";
-			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user-led {
-			label = "User";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_led>;
-			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	onewire {
-		compatible = "w1-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_w1>;
-		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_5v: regulator-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usbotg1_vbus: regulator-usbotg1vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usbotg1vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotg1_vbus>;
-		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usbotg2_vbus: regulator-usbotg2vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usbotg2vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotg2_vbus>;
-		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&adc1 {
-	vref-supply = <&reg_3v3>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_5v>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_5v>;
-	status = "okay";
-};
-
-&ecspi4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi4>;
-	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	spidev0: spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <5000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "spidev";
-		reg = <1>;
-		spi-max-frequency = <5000000>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	clock_frequency = <400000>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock_frequency = <400000>;
-	status = "okay";
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif>;
-	display = <&display0>;
-	lcd-supply = <&reg_3v3>;
-	status = "okay";
-
-	display0: display0 {
-		bits-per-pixel = <32>;
-		bus-width = <18>;
-
-		display-timings {
-			timing0: timing0 {
-				clock-frequency = <33000033>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <96>;
-				hfront-porch = <96>;
-				vback-porch = <20>;
-				vfront-porch = <21>;
-				hsync-len = <64>;
-				vsync-len = <4>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&snvs_pwrkey {
-	status = "disabled";
-};
-
-&tsc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_tsc>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
-	measure-delay-time = <0xffff>;
-	pre-charge-time = <0xffff>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1_id>;
-	vbus-supply = <&reg_usbotg1_vbus>;
-	dr_mode = "otg";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usbotg2_vbus>;
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpios>;
-
-	pinctrl_ecspi4: ecspi4grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK	0x1b0b0
-			MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI	0x1b0b0
-			MX6UL_PAD_NAND_DATA06__ECSPI4_MISO	0x1b0b0
-			MX6UL_PAD_NAND_DATA01__GPIO4_IO03	0x1b0b0
-			MX6UL_PAD_NAND_DATA07__GPIO4_IO09	0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
-			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x0b0b0
-			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_gpios: gpiosgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09	0x0b0b0
-			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x0b0b0
-			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x0b0b0
-			MX6UL_PAD_NAND_RE_B__GPIO4_IO00		0x0b0b0
-			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0x0b0b0
-			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x0b0b0
-			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x0b0b0
-			MX6UL_PAD_NAND_WE_B__GPIO4_IO01		0x0b0b0
-			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x0b0b0
-			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x0b0b0
-			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x0b0b0
-			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0
-			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0b0
-			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x0b0b0
-			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x0b0b0
-			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x0b0b0
-		>;
-	};
-
-	pinctrl_gpio_keys: gpiokeysgrp {
-		fsl,pins = <
-			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x0b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA	0x4001b8b0
-			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL	0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
-			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
-		>;
-	};
-
-	pinctrl_lcdif: lcdifgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x100b1
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x100b1
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x100b1
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x100b1
-			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x100b1
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x100b1
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x100b1
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x100b1
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x100b1
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x100b1
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x100b1
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x100b1
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x100b1
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x100b1
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x100b1
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x100b1
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x100b1
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x100b1
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x100b1
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x100b1
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x100b1
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x100b1
-		>;
-	};
-
-	pinctrl_led: ledgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_RESET__GPIO3_IO04		0x0b0b0
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_ALE__PWM3_OUT		0x1b0b0
-		>;
-	};
-
-	pinctrl_tsc: tscgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01       0xb0
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02       0xb0
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03       0xb0
-			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04       0xb0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg1_id: usbotg1idgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x1b0b0
-		>;
-	};
-
-	pinctrl_usbotg1_vbus: usbotg1vbusgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x1b0b0
-		>;
-	};
-
-	pinctrl_usbotg2_vbus: usbotg2vbusgrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x1b0b0
-		>;
-	};
-
-	pinctrl_w1: w1grp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x0b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
deleted file mode 100644
index 7d7254b12a75..000000000000
--- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
+++ /dev/null
@@ -1,549 +0,0 @@
-/*
- * Copyright 2015 Technexion Ltd.
- *
- * Author: Wig Cheng  <wig.cheng@technexion.com>
- *	   Richard Hu <richard.hu@technexion.com>
- *	   Tapani Utriainen <tapani@technexion.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6ul.dtsi"
-
-/ {
-	model = "Technexion Pico i.MX6UL Board";
-	compatible = "technexion,imx6ul-pico-hobbit", "fsl,imx6ul";
-
-	memory {
-		reg = <0x80000000 0x10000000>;
-	};
-
-	chosen {
-		stdout-path = &uart6;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		status = "okay";
-	};
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_sd1_vmmc: regulator-sd1-vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "VSD_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_otg1>;
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 6 0>;
-	};
-
-	reg_brcm: regulator-brcm {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_brcm_reg>;
-		regulator-name = "brcm_reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <200000>;
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx6ul-sgtl5000";
-		audio-cpu = <&sai1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"LINE_IN", "Line In Jack",
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-	};
-
-	sys_mclk: clock-sys-mclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		hobbitled {
-			label = "hobbitled";
-			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
-	assigned-clock-rates = <786432000>;
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
-	status = "okay";
-	phy-reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@1 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <1>;
-			max-speed = <100>;
-			interrupt-parent = <&gpio5>;
-			interrupts = <6 IRQ_TYPE_LEVEL_LOW 0>;
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic: pfuze3000@08 {
-		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
-
-		regulators {
-			/* VDD_ARM_SOC_IN*/
-			sw1b_reg: sw1b {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			/* DRAM */
-			sw3a_reg: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* DRAM */
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock_frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	codec: sgtl5000@0a {
-		reg = <0x0a>;
-		compatible = "fsl,sgtl5000";
-		clocks = <&sys_mclk>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&i2c3 {
-	clock_frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		bits-per-pixel = <32>;
-		bus-width = <24>;
-
-		display-timings {
-			native-mode = <&timing0>;
-
-			timing0: timing0 {
-				clock-frequency = <33200000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <210>;
-				hback-porch = <46>;
-				hsync-len = <1>;
-				vback-porch = <22>;
-				vfront-porch = <23>;
-				vsync-len = <1>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm7 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm7>;
-	status = "okay";
-};
-
-&pwm8 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm8>;
-	status = "okay";
-};
-
-&sai1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai1>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart6>;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_otg1_id>;
-	dr_mode = "otg";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&usdhc2 {  /* Wifi SDIO */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	no-1-8-v;
-	non-removable;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_brcm>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl_brcm_reg: brcmreggrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_DATA06__GPIO4_IO08	0x10b0	/* WL_REG_ON */
-			MX6UL_PAD_NAND_DATA04__GPIO4_IO06	0x10b0	/* WL_HOST_WAKE */
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO	0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET2_MDC	0x1b0b0
-			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
-			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x800
-			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x79
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX	0x1b020
-			MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX	0x1b020
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX	0x1b020
-			MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX	0x1b020
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO02__I2C1_SCL		0x4001b8b0
-			MX6UL_PAD_GPIO1_IO03__I2C1_SDA		0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
-			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__I2C3_SCL	0x4001b8b0
-			MX6UL_PAD_UART1_RX_DATA__I2C3_SDA	0x4001b8b0
-			>;
-	};
-
-	pinctrl_lcdif_dat: lcdifdatgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
-			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
-			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
-			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
-			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
-			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
-			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
-		>;
-	};
-
-	pinctrl_lcdif_ctrl: lcdifctrlgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
-			/* LCD reset */
-			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x79
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_ALE__PWM3_OUT		0x110b0
-		>;
-	};
-
-	pinctrl_pwm7: pwm7grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT	0x110b0
-		>;
-	};
-
-	pinctrl_pwm8: pwm8grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_ER__PWM8_OUT		0x110b0
-		>;
-	};
-
-	pinctrl_sai1: sai1grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC	0x1b0b0
-			MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK	0x1b0b0
-			MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA	0x110b0
-			MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA	0x1f0b8
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b0
-			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b0
-			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b0
-			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b0b0
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX	0x1b0b1
-			MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX	0x1b0b1
-			MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS	0x1b0b1
-			MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart6: uart6grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x1b0b1
-			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_usb_otg1: usbotg1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO06__GPIO1_IO06	0x10b0
-			>;
-	};
-
-	pinctrl_usb_otg1_id: usbotg1idgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10071
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
-			MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B	0x03029
-			MX6UL_PAD_NAND_READY_B__USDHC1_DATA4	0x17059
-			MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5	0x17059
-			MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6	0x17059
-			MX6UL_PAD_NAND_CLE__USDHC1_DATA7	0x17059
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10059
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-0010.dts b/arch/arm/boot/dts/imx6ul-tx6ul-0010.dts
deleted file mode 100644
index 8c2f3df79b47..000000000000
--- a/arch/arm/boot/dts/imx6ul-tx6ul-0010.dts
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6ul.dtsi"
-#include "imx6ul-tx6ul.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TXUL-0010 Module";
-	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
-
-	aliases {
-		/delete-property/ mmc1;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-0011.dts b/arch/arm/boot/dts/imx6ul-tx6ul-0011.dts
deleted file mode 100644
index d82698e7d50f..000000000000
--- a/arch/arm/boot/dts/imx6ul-tx6ul-0011.dts
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6ul.dtsi"
-#include "imx6ul-tx6ul.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TXUL-0011 Module";
-	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
-
-	aliases {
-		mmc0 = &usdhc2;
-		mmc1 = &usdhc1;
-	};
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	no-1-8-v;
-	non-removable;
-	fsl,wp-controller;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
deleted file mode 100644
index 28d055e3f301..000000000000
--- a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6ul.dtsi"
-#include "imx6ul-tx6ul.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TXUL-0010 Module on TXUL Mainboard";
-	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
-
-	aliases {
-		lcdif_24bit_pins_a = &pinctrl_disp0_3;
-		mmc0 = &usdhc1;
-		/delete-property/ mmc1;
-		serial2 = &uart3;
-		serial4 = &uart5;
-	};
-	/delete-node/ sound;
-};
-
-&can1 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&fec1 {
-	pinctrl-0 = <&pinctrl_enet1 &pinctrl_etnphy0_rst>;
-	/delete-node/ mdio;
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio &pinctrl_etnphy1_rst>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
-	phy-supply = <&reg_3v3_etn>;
-	phy-handle = <&etnphy1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		etnphy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_etnphy0_int>;
-			interrupt-parent = <&gpio5>;
-			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-			interrupts-extended = <&gpio5 5 IRQ_TYPE_EDGE_FALLING>;
-			status = "okay";
-		};
-
-		etnphy1: ethernet-phy@2 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <2>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_etnphy1_int>;
-			interrupt-parent = <&gpio4>;
-			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
-			interrupts-extended = <&gpio4 27 IRQ_TYPE_EDGE_FALLING>;
-			status = "okay";
-		};
-	};
-};
-
-&i2c_gpio {
-	status = "disabled";
-};
-
-&i2c2 {
-	/delete-node/ codec@0a;
-	/delete-node/ touchscreen@48;
-
-	rtc: mcp7940x@6f {
-		compatible = "microchip,mcp7940x";
-		reg = <0x6f>;
-	};
-};
-
-&kpp {
-	status = "disabled";
-};
-
-&lcdif {
-	pinctrl-0 = <&pinctrl_disp0_3>;
-};
-
-&reg_usbotg_vbus{
-	status = "disabled";
-};
-
-&usdhc1 {
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	non-removable;
-	/delete-property/ cd-gpios;
-	cap-sdio-irq;
-};
-
-&uart1 {
-	pinctrl-0 = <&pinctrl_uart1>;
-	/delete-property/ uart-has-rtscts;
-};
-
-&uart2 {
-	pinctrl-0 = <&pinctrl_uart2>;
-	/delete-property/ uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart6>;
-	status = "okay";
-};
-
-&uart7 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart7>;
-	status = "okay";
-};
-
-&uart8 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart8>;
-	status = "disabled"; /* conflicts with LCDIF */
-};
-
-&iomuxc {
-	hoggrp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x0b0b0 /* WLAN_RESET */
-		>;
-	};
-
-	pinctrl_disp0_3: disp0grp-3 {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x10 /* LSCLK */
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x10 /* OE_ACD */
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x10 /* HSYNC */
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x10 /* VSYNC */
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x10
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x10
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x10
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x10
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x10
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x10
-			/* LCD_DATA08..09 not wired */
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x10
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x10
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x10
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x10
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x10
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x10
-			/* LCD_DATA16..17 not wired */
-			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x10
-			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x10
-			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x10
-			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x10
-			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x10
-			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x10
-		>;
-	};
-
-	pinctrl_enet2_mdio: enet2-mdiogrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x0b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x0b0b0
-			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x0b0b0
-			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_uart6: uart6grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x0b0b0
-			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_uart7: uart7grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA16__UART7_DCE_TX	0x0b0b0
-			MX6UL_PAD_LCD_DATA17__UART7_DCE_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_uart8: uart8grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA20__UART8_DCE_TX	0x0b0b0
-			MX6UL_PAD_LCD_DATA21__UART8_DCE_RX	0x0b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
deleted file mode 100644
index 6da2b77edd46..000000000000
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ /dev/null
@@ -1,958 +0,0 @@
-/*
- * Copyright 2015 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/clock/imx6ul-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "imx6ul-pinfunc.h"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	/*
-	 * The decompressor and also some bootloaders rely on a
-	 * pre-existing /chosen node to be available to insert the
-	 * command line and merge other ATAGS info.
-	 * Also for U-Boot there must be a pre-existing /memory node.
-	 */
-	chosen {};
-	memory { device_type = "memory"; reg = <0 0>; };
-
-	aliases {
-		ethernet0 = &fec1;
-		ethernet1 = &fec2;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		i2c3 = &i2c4;
-		mmc0 = &usdhc1;
-		mmc1 = &usdhc2;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-		serial6 = &uart7;
-		serial7 = &uart8;
-		sai1 = &sai1;
-		sai2 = &sai2;
-		sai3 = &sai3;
-		spi0 = &ecspi1;
-		spi1 = &ecspi2;
-		spi2 = &ecspi3;
-		spi3 = &ecspi4;
-		usbphy0 = &usbphy1;
-		usbphy1 = &usbphy2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0>;
-			clock-latency = <61036>; /* two CLK32 periods */
-			operating-points = <
-				/* kHz	uV */
-				528000	1175000
-				396000	1025000
-				198000	950000
-			>;
-			fsl,soc-operating-points = <
-				/* KHz	uV */
-				528000	1175000
-				396000	1175000
-				198000	1175000
-			>;
-			clocks = <&clks IMX6UL_CLK_ARM>,
-				 <&clks IMX6UL_CLK_PLL2_BUS>,
-				 <&clks IMX6UL_CLK_PLL2_PFD2>,
-				 <&clks IMX6UL_CA7_SECONDARY_SEL>,
-				 <&clks IMX6UL_CLK_STEP>,
-				 <&clks IMX6UL_CLK_PLL1_SW>,
-				 <&clks IMX6UL_CLK_PLL1_SYS>,
-				 <&clks IMX6UL_PLL1_BYPASS>,
-				 <&clks IMX6UL_CLK_PLL1>,
-				 <&clks IMX6UL_PLL1_BYPASS_SRC>,
-				 <&clks IMX6UL_CLK_OSC>;
-			clock-names = "arm", "pll2_bus",  "pll2_pfd2_396m",
-				      "secondary_sel", "step", "pll1_sw",
-				      "pll1_sys", "pll1_bypass", "pll1",
-				      "pll1_bypass_src", "osc";
-			arm-supply = <&reg_arm>;
-			soc-supply = <&reg_soc>;
-		};
-	};
-
-	intc: interrupt-controller@00a01000 {
-		compatible = "arm,gic-400", "arm,cortex-a7-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x00a01000 0x1000>,
-		      <0x00a02000 0x2000>,
-		      <0x00a04000 0x2000>,
-		      <0x00a06000 0x2000>;
-	};
-
-	ckil: clock-cli {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "ckil";
-	};
-
-	osc: clock-osc {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-output-names = "osc";
-	};
-
-	ipp_di0: clock-di0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-		clock-output-names = "ipp_di0";
-	};
-
-	ipp_di1: clock-di1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-		clock-output-names = "ipp_di1";
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gpc>;
-		ranges;
-
-		pmu {
-			compatible = "arm,cortex-a7-pmu";
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		ocram: sram@00900000 {
-			compatible = "mmio-sram";
-			reg = <0x00900000 0x20000>;
-		};
-
-		dma_apbh: dma-apbh@01804000 {
-			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
-			reg = <0x01804000 0x2000>;
-			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <0 13 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
-			#dma-cells = <1>;
-			dma-channels = <4>;
-			clocks = <&clks IMX6UL_CLK_APBHDMA>;
-		};
-
-		gpmi: gpmi-nand@01806000         {
-			compatible = "fsl,imx6q-gpmi-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x01806000 0x2000>, <0x01808000 0x2000>;
-			reg-names = "gpmi-nand", "bch";
-			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "bch";
-			clocks = <&clks IMX6UL_CLK_GPMI_IO>,
-				 <&clks IMX6UL_CLK_GPMI_APB>,
-				 <&clks IMX6UL_CLK_GPMI_BCH>,
-				 <&clks IMX6UL_CLK_GPMI_BCH_APB>,
-				 <&clks IMX6UL_CLK_PER_BCH>;
-			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
-				      "gpmi_bch_apb", "per1_bch";
-			dmas = <&dma_apbh 0>;
-			dma-names = "rx-tx";
-			status = "disabled";
-		};
-
-		aips1: aips-bus@02000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02000000 0x100000>;
-			ranges;
-
-			spba-bus@02000000 {
-				compatible = "fsl,spba-bus", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x02000000 0x40000>;
-				ranges;
-
-				ecspi1: ecspi@02008000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02008000 0x4000>;
-					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6UL_CLK_ECSPI1>,
-						 <&clks IMX6UL_CLK_ECSPI1>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi2: ecspi@0200c000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
-					reg = <0x0200c000 0x4000>;
-					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6UL_CLK_ECSPI2>,
-						 <&clks IMX6UL_CLK_ECSPI2>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi3: ecspi@02010000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02010000 0x4000>;
-					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6UL_CLK_ECSPI3>,
-						 <&clks IMX6UL_CLK_ECSPI3>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi4: ecspi@02014000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02014000 0x4000>;
-					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6UL_CLK_ECSPI4>,
-						 <&clks IMX6UL_CLK_ECSPI4>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				uart7: serial@02018000 {
-					compatible = "fsl,imx6ul-uart",
-						     "fsl,imx6q-uart";
-					reg = <0x02018000 0x4000>;
-					interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6UL_CLK_UART7_IPG>,
-						 <&clks IMX6UL_CLK_UART7_SERIAL>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				uart1: serial@02020000 {
-					compatible = "fsl,imx6ul-uart",
-						     "fsl,imx6q-uart";
-					reg = <0x02020000 0x4000>;
-					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6UL_CLK_UART1_IPG>,
-						 <&clks IMX6UL_CLK_UART1_SERIAL>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				uart8: serial@02024000 {
-					compatible = "fsl,imx6ul-uart",
-						     "fsl,imx6q-uart";
-					reg = <0x02024000 0x4000>;
-					interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6UL_CLK_UART8_IPG>,
-						 <&clks IMX6UL_CLK_UART8_SERIAL>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				sai1: sai@02028000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
-					reg = <0x02028000 0x4000>;
-					interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6UL_CLK_SAI1_IPG>,
-						 <&clks IMX6UL_CLK_SAI1>,
-						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
-					clock-names = "bus", "mclk1", "mclk2", "mclk3";
-					dmas = <&sdma 35 24 0>,
-					       <&sdma 36 24 0>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-
-				sai2: sai@0202c000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
-					reg = <0x0202c000 0x4000>;
-					interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6UL_CLK_SAI2_IPG>,
-						 <&clks IMX6UL_CLK_SAI2>,
-						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
-					clock-names = "bus", "mclk1", "mclk2", "mclk3";
-					dmas = <&sdma 37 24 0>,
-					       <&sdma 38 24 0>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-
-				sai3: sai@02030000 {
-					#sound-dai-cells = <0>;
-					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
-					reg = <0x02030000 0x4000>;
-					interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6UL_CLK_SAI3_IPG>,
-						 <&clks IMX6UL_CLK_SAI3>,
-						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
-					clock-names = "bus", "mclk1", "mclk2", "mclk3";
-					dmas = <&sdma 39 24 0>,
-					       <&sdma 40 24 0>;
-					dma-names = "rx", "tx";
-					status = "disabled";
-				};
-			};
-
-			tsc: tsc@02040000 {
-				compatible = "fsl,imx6ul-tsc";
-				reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
-				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_IPG>,
-					 <&clks IMX6UL_CLK_ADC2>;
-				clock-names = "tsc", "adc";
-				status = "disabled";
-			};
-
-			pwm1: pwm@02080000 {
-				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
-				reg = <0x02080000 0x4000>;
-				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_PWM1>,
-					 <&clks IMX6UL_CLK_PWM1>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-				status = "disabled";
-			};
-
-			pwm2: pwm@02084000 {
-				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
-				reg = <0x02084000 0x4000>;
-				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_PWM2>,
-					 <&clks IMX6UL_CLK_PWM2>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-				status = "disabled";
-			};
-
-			pwm3: pwm@02088000 {
-				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
-				reg = <0x02088000 0x4000>;
-				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_PWM3>,
-					 <&clks IMX6UL_CLK_PWM3>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-				status = "disabled";
-			};
-
-			pwm4: pwm@0208c000 {
-				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
-				reg = <0x0208c000 0x4000>;
-				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_PWM4>,
-					 <&clks IMX6UL_CLK_PWM4>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-				status = "disabled";
-			};
-
-			can1: flexcan@02090000 {
-				compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
-				reg = <0x02090000 0x4000>;
-				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
-					 <&clks IMX6UL_CLK_CAN1_SERIAL>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			can2: flexcan@02094000 {
-				compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
-				reg = <0x02094000 0x4000>;
-				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
-					 <&clks IMX6UL_CLK_CAN2_SERIAL>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			gpt1: gpt@02098000 {
-				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
-				reg = <0x02098000 0x4000>;
-				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
-					 <&clks IMX6UL_CLK_GPT1_SERIAL>;
-				clock-names = "ipg", "per";
-			};
-
-			gpio1: gpio@0209c000 {
-				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
-				reg = <0x0209c000 0x4000>;
-				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc  0 23 10>, <&iomuxc 10 17 6>,
-					      <&iomuxc 16 33 16>;
-			};
-
-			gpio2: gpio@020a0000 {
-				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
-				reg = <0x020a0000 0x4000>;
-				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 49 16>, <&iomuxc 16 111 6>;
-			};
-
-			gpio3: gpio@020a4000 {
-				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
-				reg = <0x020a4000 0x4000>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 65 29>;
-			};
-
-			gpio4: gpio@020a8000 {
-				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
-				reg = <0x020a8000 0x4000>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 94 17>, <&iomuxc 17 117 12>;
-			};
-
-			gpio5: gpio@020ac000 {
-				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
-				reg = <0x020ac000 0x4000>;
-				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 7 10>, <&iomuxc 10 5 2>;
-			};
-
-			fec2: ethernet@020b4000 {
-				compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
-				reg = <0x020b4000 0x4000>;
-				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_ENET>,
-					 <&clks IMX6UL_CLK_ENET_AHB>,
-					 <&clks IMX6UL_CLK_ENET_PTP>,
-					 <&clks IMX6UL_CLK_ENET2_REF_125M>,
-					 <&clks IMX6UL_CLK_ENET2_REF_125M>;
-				clock-names = "ipg", "ahb", "ptp",
-					      "enet_clk_ref", "enet_out";
-				fsl,num-tx-queues=<1>;
-				fsl,num-rx-queues=<1>;
-				status = "disabled";
-			};
-
-			kpp: kpp@020b8000 {
-				compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
-				reg = <0x020b8000 0x4000>;
-				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_KPP>;
-				status = "disabled";
-			};
-
-			wdog1: wdog@020bc000 {
-				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
-				reg = <0x020bc000 0x4000>;
-				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_WDOG1>;
-			};
-
-			wdog2: wdog@020c0000 {
-				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
-				reg = <0x020c0000 0x4000>;
-				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_WDOG2>;
-				status = "disabled";
-			};
-
-			clks: ccm@020c4000 {
-				compatible = "fsl,imx6ul-ccm";
-				reg = <0x020c4000 0x4000>;
-				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-				#clock-cells = <1>;
-				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
-				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
-			};
-
-			anatop: anatop@020c8000 {
-				compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
-					     "syscon", "simple-bus";
-				reg = <0x020c8000 0x1000>;
-				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-
-				reg_3p0: regulator-3p0 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd3p0";
-					regulator-min-microvolt = <2625000>;
-					regulator-max-microvolt = <3400000>;
-					anatop-reg-offset = <0x120>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <0>;
-					anatop-min-voltage = <2625000>;
-					anatop-max-voltage = <3400000>;
-					anatop-enable-bit = <0>;
-				};
-
-				reg_arm: regulator-vddcore {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "cpu";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <0>;
-					anatop-vol-bit-width = <5>;
-					anatop-delay-reg-offset = <0x170>;
-					anatop-delay-bit-shift = <24>;
-					anatop-delay-bit-width = <2>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-
-				reg_soc: regulator-vddsoc {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vddsoc";
-					regulator-min-microvolt = <725000>;
-					regulator-max-microvolt = <1450000>;
-					regulator-always-on;
-					anatop-reg-offset = <0x140>;
-					anatop-vol-bit-shift = <18>;
-					anatop-vol-bit-width = <5>;
-					anatop-delay-reg-offset = <0x170>;
-					anatop-delay-bit-shift = <28>;
-					anatop-delay-bit-width = <2>;
-					anatop-min-bit-val = <1>;
-					anatop-min-voltage = <725000>;
-					anatop-max-voltage = <1450000>;
-				};
-			};
-
-			usbphy1: usbphy@020c9000 {
-				compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
-				reg = <0x020c9000 0x1000>;
-				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_USBPHY1>;
-				phy-3p0-supply = <&reg_3p0>;
-				fsl,anatop = <&anatop>;
-			};
-
-			usbphy2: usbphy@020ca000 {
-				compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
-				reg = <0x020ca000 0x1000>;
-				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_USBPHY2>;
-				phy-3p0-supply = <&reg_3p0>;
-				fsl,anatop = <&anatop>;
-			};
-
-			snvs: snvs@020cc000 {
-				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
-				reg = <0x020cc000 0x4000>;
-
-				snvs_rtc: snvs-rtc-lp {
-					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					regmap = <&snvs>;
-					offset = <0x34>;
-					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				snvs_poweroff: snvs-poweroff {
-					compatible = "syscon-poweroff";
-					regmap = <&snvs>;
-					offset = <0x38>;
-					mask = <0x60>;
-					status = "disabled";
-				};
-
-				snvs_pwrkey: snvs-powerkey {
-					compatible = "fsl,sec-v4.0-pwrkey";
-					regmap = <&snvs>;
-					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-					linux,keycode = <KEY_POWER>;
-					wakeup-source;
-				};
-			};
-
-			epit1: epit@020d0000 {
-				reg = <0x020d0000 0x4000>;
-				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			epit2: epit@020d4000 {
-				reg = <0x020d4000 0x4000>;
-				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			src: src@020d8000 {
-				compatible = "fsl,imx6ul-src", "fsl,imx51-src";
-				reg = <0x020d8000 0x4000>;
-				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-				#reset-cells = <1>;
-			};
-
-			gpc: gpc@020dc000 {
-				compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
-				reg = <0x020dc000 0x4000>;
-				interrupt-controller;
-				#interrupt-cells = <3>;
-				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-parent = <&intc>;
-			};
-
-			iomuxc: iomuxc@020e0000 {
-				compatible = "fsl,imx6ul-iomuxc";
-				reg = <0x020e0000 0x4000>;
-			};
-
-			gpr: iomuxc-gpr@020e4000 {
-				compatible = "fsl,imx6ul-iomuxc-gpr",
-					     "fsl,imx6q-iomuxc-gpr", "syscon";
-				reg = <0x020e4000 0x4000>;
-			};
-
-			gpt2: gpt@020e8000 {
-				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
-				reg = <0x020e8000 0x4000>;
-				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_GPT2_BUS>,
-					 <&clks IMX6UL_CLK_GPT2_SERIAL>;
-				clock-names = "ipg", "per";
-			};
-
-			sdma: sdma@020ec000 {
-				compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma",
-					     "fsl,imx35-sdma";
-				reg = <0x020ec000 0x4000>;
-				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_SDMA>,
-					 <&clks IMX6UL_CLK_SDMA>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <3>;
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
-			};
-
-			pwm5: pwm@020f0000 {
-				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
-				reg = <0x020f0000 0x4000>;
-				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_PWM5>,
-					 <&clks IMX6UL_CLK_PWM5>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-				status = "disabled";
-			};
-
-			pwm6: pwm@020f4000 {
-				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
-				reg = <0x020f4000 0x4000>;
-				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_PWM6>,
-					 <&clks IMX6UL_CLK_PWM6>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-				status = "disabled";
-			};
-
-			pwm7: pwm@020f8000 {
-				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
-				reg = <0x020f8000 0x4000>;
-				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_PWM7>,
-					 <&clks IMX6UL_CLK_PWM7>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-				status = "disabled";
-			};
-
-			pwm8: pwm@020fc000 {
-				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
-				reg = <0x020fc000 0x4000>;
-				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_PWM8>,
-					 <&clks IMX6UL_CLK_PWM8>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-				status = "disabled";
-			};
-		};
-
-		aips2: aips-bus@02100000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02100000 0x100000>;
-			ranges;
-
-			usbotg1: usb@02184000 {
-				compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
-				reg = <0x02184000 0x200>;
-				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_USBOH3>;
-				fsl,usbphy = <&usbphy1>;
-				fsl,usbmisc = <&usbmisc 0>;
-				fsl,anatop = <&anatop>;
-				ahb-burst-config = <0x0>;
-				tx-burst-size-dword = <0x10>;
-				rx-burst-size-dword = <0x10>;
-				status = "disabled";
-			};
-
-			usbotg2: usb@02184200 {
-				compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
-				reg = <0x02184200 0x200>;
-				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_USBOH3>;
-				fsl,usbphy = <&usbphy2>;
-				fsl,usbmisc = <&usbmisc 1>;
-				ahb-burst-config = <0x0>;
-				tx-burst-size-dword = <0x10>;
-				rx-burst-size-dword = <0x10>;
-				status = "disabled";
-			};
-
-			usbmisc: usbmisc@02184800 {
-				#index-cells = <1>;
-				compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
-				reg = <0x02184800 0x200>;
-			};
-
-			fec1: ethernet@02188000 {
-				compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
-				reg = <0x02188000 0x4000>;
-				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_ENET>,
-					 <&clks IMX6UL_CLK_ENET_AHB>,
-					 <&clks IMX6UL_CLK_ENET_PTP>,
-					 <&clks IMX6UL_CLK_ENET_REF>,
-					 <&clks IMX6UL_CLK_ENET_REF>;
-				clock-names = "ipg", "ahb", "ptp",
-					      "enet_clk_ref", "enet_out";
-				fsl,num-tx-queues=<1>;
-				fsl,num-rx-queues=<1>;
-				status = "disabled";
-			};
-
-			usdhc1: usdhc@02190000 {
-				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
-				reg = <0x02190000 0x4000>;
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_USDHC1>,
-					 <&clks IMX6UL_CLK_USDHC1>,
-					 <&clks IMX6UL_CLK_USDHC1>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc2: usdhc@02194000 {
-				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
-				reg = <0x02194000 0x4000>;
-				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_USDHC2>,
-					 <&clks IMX6UL_CLK_USDHC2>,
-					 <&clks IMX6UL_CLK_USDHC2>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			adc1: adc@02198000 {
-				compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
-				reg = <0x02198000 0x4000>;
-				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_ADC1>;
-				num-channels = <2>;
-				clock-names = "adc";
-				fsl,adck-max-frequency = <30000000>, <40000000>,
-							 <20000000>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@021a0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
-				reg = <0x021a0000 0x4000>;
-				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_I2C1>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@021a4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
-				reg = <0x021a4000 0x4000>;
-				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_I2C2>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@021a8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
-				reg = <0x021a8000 0x4000>;
-				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_I2C3>;
-				status = "disabled";
-			};
-
-			mmdc: mmdc@021b0000 {
-				compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
-				reg = <0x021b0000 0x4000>;
-			};
-
-			ocotp: ocotp-ctrl@021bc000 {
-				compatible = "fsl,imx6ul-ocotp", "syscon";
-				reg = <0x021bc000 0x4000>;
-				clocks = <&clks IMX6UL_CLK_OCOTP>;
-			};
-
-			lcdif: lcdif@021c8000 {
-				compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
-				reg = <0x021c8000 0x4000>;
-				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
-					 <&clks IMX6UL_CLK_LCDIF_APB>,
-					 <&clks IMX6UL_CLK_DUMMY>;
-				clock-names = "pix", "axi", "disp_axi";
-				status = "disabled";
-			};
-
-			qspi: qspi@021e0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
-				reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
-				reg-names = "QuadSPI", "QuadSPI-memory";
-				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_QSPI>,
-					 <&clks IMX6UL_CLK_QSPI>;
-				clock-names = "qspi_en", "qspi";
-				status = "disabled";
-			};
-
-			uart2: serial@021e8000 {
-				compatible = "fsl,imx6ul-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x021e8000 0x4000>;
-				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_UART2_IPG>,
-					 <&clks IMX6UL_CLK_UART2_SERIAL>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart3: serial@021ec000 {
-				compatible = "fsl,imx6ul-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x021ec000 0x4000>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_UART3_IPG>,
-					 <&clks IMX6UL_CLK_UART3_SERIAL>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart4: serial@021f0000 {
-				compatible = "fsl,imx6ul-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x021f0000 0x4000>;
-				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_UART4_IPG>,
-					 <&clks IMX6UL_CLK_UART4_SERIAL>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart5: serial@021f4000 {
-				compatible = "fsl,imx6ul-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x021f4000 0x4000>;
-				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_UART5_IPG>,
-					 <&clks IMX6UL_CLK_UART5_SERIAL>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			i2c4: i2c@021f8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
-				reg = <0x021f8000 0x4000>;
-				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_I2C4>;
-				status = "disabled";
-			};
-
-			uart6: serial@021fc000 {
-				compatible = "fsl,imx6ul-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x021fc000 0x4000>;
-				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_UART6_IPG>,
-					 <&clks IMX6UL_CLK_UART6_SERIAL>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ull-14x14-evk.dts b/arch/arm/boot/dts/imx6ull-14x14-evk.dts
deleted file mode 100644
index 4741871434dd..000000000000
--- a/arch/arm/boot/dts/imx6ull-14x14-evk.dts
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2016 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "imx6ul-14x14-evk.dts"
-
-/ {
-	model = "Freescale i.MX6 UlltraLite 14x14 EVK Board";
-	compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>;
-	assigned-clock-rates = <320000000>;
-};
diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/imx6ull-pinfunc.h
deleted file mode 100644
index 118202336691..000000000000
--- a/arch/arm/boot/dts/imx6ull-pinfunc.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright (C) 2016 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __DTS_IMX6ULL_PINFUNC_H
-#define __DTS_IMX6ULL_PINFUNC_H
-
-#include "imx6ul-pinfunc.h"
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX6ULL_PAD_ENET2_RX_DATA0__EPDC_SDDO08                    0x00E4 0x0370 0x0000 0x9 0x0
-#define MX6ULL_PAD_ENET2_RX_DATA1__EPDC_SDDO09                    0x00E8 0x0374 0x0000 0x9 0x0
-#define MX6ULL_PAD_ENET2_RX_EN__EPDC_SDDO10                       0x00EC 0x0378 0x0000 0x9 0x0
-#define MX6ULL_PAD_ENET2_TX_DATA0__EPDC_SDDO11                    0x00F0 0x037C 0x0000 0x9 0x0
-#define MX6ULL_PAD_ENET2_TX_DATA1__EPDC_SDDO12                    0x00F4 0x0380 0x0000 0x9 0x0
-#define MX6ULL_PAD_ENET2_TX_EN__EPDC_SDDO13                       0x00F8 0x0384 0x0000 0x9 0x0
-#define MX6ULL_PAD_ENET2_TX_CLK__EPDC_SDDO14                      0x00FC 0x0388 0x0000 0x9 0x0
-#define MX6ULL_PAD_ENET2_RX_ER__EPDC_SDDO15                       0x0100 0x038C 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_CLK__EPDC_SDCLK                            0x0104 0x0390 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_ENABLE__EPDC_SDLE                          0x0108 0x0394 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_HSYNC__EPDC_SDOE                           0x010C 0x0398 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_VSYNC__EPDC_SDCE0                          0x0110 0x039C 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_RESET__EPDC_GDOE                           0x0114 0x03A0 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA00__EPDC_SDDO00                        0x0118 0x03A4 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA01__EPDC_SDDO01                        0x011C 0x03A8 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA02__EPDC_SDDO02                        0x0120 0x03AC 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA03__EPDC_SDDO03                        0x0124 0x03B0 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA04__EPDC_SDDO04                        0x0128 0x03B4 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA05__EPDC_SDDO05                        0x012C 0x03B8 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA06__EPDC_SDDO06                        0x0130 0x03BC 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA07__EPDC_SDDO07                        0x0134 0x03C0 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA14__EPDC_SDSHR                         0x0150 0x03DC 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA15__EPDC_GDRL                          0x0154 0x03E0 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA16__EPDC_GDCLK                         0x0158 0x03E4 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA17__EPDC_GDSP                          0x015C 0x03E8 0x0000 0x9 0x0
-#define MX6ULL_PAD_LCD_DATA21__EPDC_SDCE1                         0x016C 0x03F8 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_MCLK__ESAI_TX3_RX2                         0x01D4 0x0460 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_PIXCLK__ESAI_TX2_RX3                       0x01D8 0x0464 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_VSYNC__ESAI_TX4_RX1                        0x01DC 0x0468 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_HSYNC__ESAI_TX1                            0x01E0 0x046C 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA00__ESAI_TX_HF_CLK                     0x01E4 0x0470 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA01__ESAI_RX_HF_CLK                     0x01E8 0x0474 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA02__ESAI_RX_FS                         0x01EC 0x0478 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA03__ESAI_RX_CLK                        0x01F0 0x047C 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS                         0x01F4 0x0480 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK                        0x01F8 0x0484 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0                       0x01FC 0x0488 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA07__ESAI_T0                            0x0200 0x048C 0x0000 0x9 0x0
-
-#endif /* __DTS_IMX6ULL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
deleted file mode 100644
index 0c182917b863..000000000000
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright 2016 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "imx6ul.dtsi"
-#include "imx6ull-pinfunc.h"
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
deleted file mode 100644
index 18bebd6d8d47..000000000000
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Copyright 2016 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/ {
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	panel: panel {
-		compatible = "edt,et057090dhu";
-		backlight = <&bl>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lcdif_out>;
-			};
-		};
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_5v0: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-};
-
-&bl {
-	brightness-levels = <0 4 8 16 32 64 128 255>;
-	default-brightness-level = <6>;
-	power-supply = <&reg_3v3>;
-
-	status = "okay";
-};
-
-&adc1 {
-	status = "okay";
-};
-
-&adc2 {
-	status = "okay";
-};
-
-&fec1 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc: m41t0m6@68 {
-		compatible = "st,m41t00";
-		reg = <0x68>;
-	};
-};
-
-&lcdif {
-	status = "okay";
-
-	port {
-		lcdif_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&usbotg1 {
-	status = "okay";
-};
-
-&usdhc1 {
-	keep-power-in-suspend;
-	wakeup-source;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
deleted file mode 100644
index d7753f79937a..000000000000
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ /dev/null
@@ -1,617 +0,0 @@
-/*
- * Copyright 2016 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/ {
-	bl: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000 0>;
-	};
-
-	reg_module_3v3: regulator-module-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "+V3.3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_module_3v3_avdd: regulator-module-3v3-avdd {
-		compatible = "regulator-fixed";
-		regulator-name = "+V3.3_AVDD_AUDIO";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "imx7-sgtl5000";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink_master>;
-		simple-audio-card,frame-master = <&dailink_master>;
-		simple-audio-card,cpu {
-			sound-dai = <&sai1>;
-		};
-
-		dailink_master: simple-audio-card,codec {
-			sound-dai = <&codec>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
-		};
-	};
-};
-
-&adc1 {
-	vref-supply = <&reg_DCDC3>;
-};
-
-&adc2 {
-	vref-supply = <&reg_DCDC3>;
-};
-
-&cpu0 {
-	arm-supply = <&reg_DCDC2>;
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
-		<&clks IMX7D_ENET_AXI_ROOT_CLK>,
-		<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
-		<&clks IMX7D_PLL_ENET_MAIN_50M_CLK>;
-	clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
-	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rmii";
-	phy-supply = <&reg_LDO1>;
-	fsl,magic-packet;
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1 &pinctrl_i2c1_int>;
-	status = "okay";
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		#sound-dai-cells = <0>;
-		reg = <0x0a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sai1_mclk>;
-		VDDA-supply = <&reg_module_3v3_avdd>;
-		VDDIO-supply = <&reg_module_3v3>;
-		VDDD-supply = <&reg_DCDC3>;
-	};
-
-	ad7879@2c {
-		compatible = "adi,ad7879-1";
-		reg = <0x2c>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
-		touchscreen-max-pressure = <4096>;
-		adi,resistance-plate-x = <120>;
-		adi,first-conversion-delay = /bits/ 8 <3>;
-		adi,acquisition-time = /bits/ 8 <1>;
-		adi,median-filter-size = /bits/ 8 <2>;
-		adi,averaging = /bits/ 8 <1>;
-		adi,conversion-interval = /bits/ 8 <255>;
-	};
-
-	pmic@33 {
-		compatible = "ricoh,rn5t567";
-		reg = <0x33>;
-
-		regulators {
-			reg_DCDC1: DCDC1 {  /* V1.0_SOC */
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_DCDC2: DCDC2 { /* V1.1_ARM */
-				regulator-min-microvolt = <975000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_DCDC3: DCDC3 { /* V1.8 */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_DCDC4: DCDC4 { /* V1.35_DRAM */
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_LDO1: LDO1 { /* PWR_EN_+V3.3_ETH */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-			};
-
-			reg_LDO2: LDO2 { /* +V1.8_SD */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_LDO3: LDO3 { /* PWR_EN_+V3.3_LPSR */
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_LDO4: LDO4 { /* V1.8_LPSR */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_LDO5: LDO5 { /* PWR_EN_+V3.3 */
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif_dat
-		     &pinctrl_lcdif_ctrl>;
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-};
-
-&reg_1p0d {
-	vin-supply = <&reg_DCDC3>;
-};
-
-&sai1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai1>;
-	status = "okay";
-};
-
-&snvs_pwrkey {
-	status = "disabled";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>;
-	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	uart-has-rtscts;
-	fsl,dte-mode;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	uart-has-rtscts;
-	fsl,dte-mode;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	fsl,dte-mode;
-};
-
-&usbotg1 {
-	dr_mode = "host";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
-	no-1-8-v;
-	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	disable-wp;
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>;
-
-	pinctrl_gpio1: gpio1-grp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3	0x14 /* SODIMM 55 */
-			MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2	0x14 /* SODIMM 63 */
-			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0X14 /* SODIMM 73 */
-			MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16	0X14 /* SODIMM 77 */
-			MX7D_PAD_EPDC_DATA09__GPIO2_IO9		0x14 /* SODIMM 89 */
-			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x14 /* SODIMM 91 */
-			MX7D_PAD_LCD_RESET__GPIO3_IO4		0x14 /* SODIMM 93 */
-			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14 /* SODIMM 95 */
-			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11	0x14 /* SODIMM 99 */
-			MX7D_PAD_EPDC_DATA10__GPIO2_IO10	0x14 /* SODIMM 105 */
-			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x14 /* SODIMM 107 */
-			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x14 /* SODIMM 111 */
-			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x14 /* SODIMM 113 */
-			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x14 /* SODIMM 115 */
-			MX7D_PAD_EPDC_DATA03__GPIO2_IO3		0x14 /* SODIMM 117 */
-			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x14 /* SODIMM 119 */
-			MX7D_PAD_EPDC_DATA05__GPIO2_IO5		0x14 /* SODIMM 121 */
-			MX7D_PAD_EPDC_DATA06__GPIO2_IO6		0x14 /* SODIMM 123 */
-			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x14 /* SODIMM 125 */
-			MX7D_PAD_EPDC_SDCE2__GPIO2_IO22		0x14 /* SODIMM 127 */
-			MX7D_PAD_UART3_RTS_B__GPIO4_IO6		0x14 /* SODIMM 131 */
-			MX7D_PAD_EPDC_GDRL__GPIO2_IO26		0x14 /* SODIMM 133 */
-			MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17	0x14 /* SODIMM 24 */
-			MX7D_PAD_SD2_DATA2__GPIO5_IO16		0x14 /* SODIMM 100 */
-			MX7D_PAD_SD2_DATA3__GPIO5_IO17		0x14 /* SODIMM 102 */
-			MX7D_PAD_EPDC_GDSP__GPIO2_IO27		0x14 /* SODIMM 104 */
-			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x14 /* SODIMM 106 */
-			MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x14 /* SODIMM 110 */
-			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x14 /* SODIMM 112 */
-			MX7D_PAD_EPDC_SDCLK__GPIO2_IO16		0x14 /* SODIMM 114 */
-			MX7D_PAD_EPDC_SDLE__GPIO2_IO17		0x14 /* SODIMM 116 */
-			MX7D_PAD_EPDC_SDOE__GPIO2_IO18		0x14 /* SODIMM 118 */
-			MX7D_PAD_EPDC_SDSHR__GPIO2_IO19		0x14 /* SODIMM 120 */
-			MX7D_PAD_EPDC_SDCE0__GPIO2_IO20		0x14 /* SODIMM 122 */
-			MX7D_PAD_EPDC_SDCE1__GPIO2_IO21		0x14 /* SODIMM 124 */
-			MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x14 /* SODIMM 126 */
-			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x14 /* SODIMM 128 */
-			MX7D_PAD_EPDC_SDCE3__GPIO2_IO23		0x14 /* SODIMM 130 */
-			MX7D_PAD_EPDC_GDCLK__GPIO2_IO24		0x14 /* SODIMM 132 */
-			MX7D_PAD_EPDC_GDOE__GPIO2_IO25		0x14 /* SODIMM 134 */
-			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x14 /* SODIMM 150 */
-			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x14 /* SODIMM 152 */
-			MX7D_PAD_SD2_CLK__GPIO5_IO12		0x14 /* SODIMM 184 */
-			MX7D_PAD_SD2_CMD__GPIO5_IO13		0x14 /* SODIMM 186 */
-		>;
-	};
-
-	pinctrl_gpio2: gpio2-grp { /* On X22 Camera interface */
-		fsl,pins = <
-			MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x14 /* SODIMM 65 */
-			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x14 /* SODIMM 69 */
-			MX7D_PAD_SD1_WP__GPIO5_IO1		0x14 /* SODIMM 71 */
-			MX7D_PAD_I2C4_SDA__GPIO4_IO15		0x14 /* SODIMM 75 */
-			MX7D_PAD_ECSPI1_MISO__GPIO4_IO18	0x14 /* SODIMM 79 */
-			MX7D_PAD_I2C3_SCL__GPIO4_IO12		0x14 /* SODIMM 81 */
-			MX7D_PAD_ECSPI2_MISO__GPIO4_IO22	0x14 /* SODIMM 85 */
-			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19		0x14 /* SODIMM 97 */
-			MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16	0x14 /* SODIMM 101 */
-			MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17	0x14 /* SODIMM 103 */
-			MX7D_PAD_I2C3_SDA__GPIO4_IO13		0x14 /* SODIMM 94 */
-			MX7D_PAD_I2C4_SCL__GPIO4_IO14		0x14 /* SODIMM 96 */
-			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x14 /* SODIMM 98 */
-		>;
-	};
-
-	pinctrl_gpio3: gpio3-grp { /* LCD 18-23 */
-		fsl,pins = <
-			MX7D_PAD_LCD_DATA18__GPIO3_IO23		0x14 /* SODIMM 136 */
-			MX7D_PAD_LCD_DATA19__GPIO3_IO24		0x14 /* SODIMM 138 */
-			MX7D_PAD_LCD_DATA20__GPIO3_IO25		0x14 /* SODIMM 140 */
-			MX7D_PAD_LCD_DATA21__GPIO3_IO26		0x14 /* SODIMM 142 */
-			MX7D_PAD_LCD_DATA22__GPIO3_IO27		0x14 /* SODIMM 146 */
-			MX7D_PAD_LCD_DATA23__GPIO3_IO28		0x14 /* SODIMM 148 */
-		>;
-	};
-
-	pinctrl_gpio4: gpio4-grp { /* Alternatively CAN2 */
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO15__GPIO1_IO15		0x14 /* SODIMM 178 */
-			MX7D_PAD_GPIO1_IO14__GPIO1_IO14		0x14 /* SODIMM 188 */
-		>;
-	};
-
-	pinctrl_i2c1_int: i2c1-int-grp { /* PMIC / TOUCH */
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x79
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_CRS__GPIO7_IO14			0x14
-			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x73
-			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x73
-			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x73
-			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER		0x73
-
-			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x73
-			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x73
-			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x73
-			MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1		0x73
-			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x3
-			MX7D_PAD_SD2_WP__ENET1_MDC			0x3
-		>;
-	};
-
-	pinctrl_ecspi3_cs: ecspi3-cs-grp {
-		fsl,pins = <
-			MX7D_PAD_I2C2_SDA__GPIO4_IO11		0x14
-		>;
-	};
-
-	pinctrl_ecspi3: ecspi3-grp {
-		fsl,pins = <
-			MX7D_PAD_I2C1_SCL__ECSPI3_MISO		0x2
-			MX7D_PAD_I2C1_SDA__ECSPI3_MOSI		0x2
-			MX7D_PAD_I2C2_SCL__ECSPI3_SCLK		0x2
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2-grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x59
-			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x59
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpmi-nand-grp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CLK__NAND_CLE		0x71
-			MX7D_PAD_SD3_CMD__NAND_ALE		0x71
-			MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B	0x71
-			MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B	0x71
-			MX7D_PAD_SAI1_TX_DATA__NAND_READY_B	0x74
-			MX7D_PAD_SD3_STROBE__NAND_RE_B		0x71
-			MX7D_PAD_SD3_RESET_B__NAND_WE_B		0x71
-			MX7D_PAD_SD3_DATA0__NAND_DATA00		0x71
-			MX7D_PAD_SD3_DATA1__NAND_DATA01		0x71
-			MX7D_PAD_SD3_DATA2__NAND_DATA02		0x71
-			MX7D_PAD_SD3_DATA3__NAND_DATA03		0x71
-			MX7D_PAD_SD3_DATA4__NAND_DATA04		0x71
-			MX7D_PAD_SD3_DATA5__NAND_DATA05		0x71
-			MX7D_PAD_SD3_DATA6__NAND_DATA06		0x71
-			MX7D_PAD_SD3_DATA7__NAND_DATA07		0x71
-		>;
-	};
-
-	pinctrl_i2c4: i2c4-grp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA	0x4000007f
-			MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL	0x4000007f
-		>;
-	};
-
-	pinctrl_lcdif_dat: lcdif-dat-grp {
-		fsl,pins = <
-			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
-			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
-			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
-			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
-			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
-			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
-			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
-			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
-			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
-			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
-			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
-			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
-			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
-			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
-			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
-			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
-			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
-			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
-		>;
-	};
-
-	pinctrl_lcdif_dat_24: lcdif-dat-24-grp {
-		fsl,pins = <
-			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
-			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
-			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
-			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
-			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
-			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
-		>;
-	};
-
-	pinctrl_lcdif_ctrl: lcdif-ctrl-grp {
-		fsl,pins = <
-			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
-			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
-			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
-			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
-		>;
-	};
-
-	pinctrl_pwm1: pwm1-grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO08__PWM1_OUT		0x79
-		>;
-	};
-
-	pinctrl_pwm2: pwm2-grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO09__PWM2_OUT		0x79
-		>;
-	};
-
-	pinctrl_pwm3: pwm3-grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO10__PWM3_OUT		0x79
-		>;
-	};
-
-	pinctrl_pwm4: pwm4-grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO11__PWM4_OUT		0x79
-		>;
-	};
-
-	pinctrl_uart1: uart1-grp {
-		fsl,pins = <
-			MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX	0x79
-			MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX	0x79
-			MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS	0x79
-			MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS	0x79
-		>;
-	};
-
-	pinctrl_uart1_ctrl1: uart1-ctrl1-grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_DATA1__GPIO5_IO15		0x14 /* DCD */
-			MX7D_PAD_SD2_DATA0__GPIO5_IO14		0x14 /* DTR */
-		>;
-	};
-
-	pinctrl_uart2: uart2-grp {
-		fsl,pins = <
-			MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x79
-			MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x79
-			MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS 0x79
-			MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS 0x79
-		>;
-	};
-	pinctrl_uart3: uart3-grp {
-		fsl,pins = <
-			MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX 0x79
-			MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x79
-		>;
-	};
-
-	pinctrl_usbotg2_reg: gpio-usbotg2-vbus {
-		fsl,pins = <
-			MX7D_PAD_UART3_CTS_B__GPIO4_IO7	0x14 /* SODIMM 129 USBH PEN */
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1-grp {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD	0x59
-			MX7D_PAD_SD1_CLK__SD1_CLK	0x19
-			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x59
-			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x59
-			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x59
-			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x59
-		>;
-	};
-
-	pinctrl_sai1: sai1-grp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK     0x1f
-			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
-			MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
-			MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
-		>;
-	};
-
-	pinctrl_sai1_mclk: sai1grp_mclk {
-		fsl,pins = <
-			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
-		>;
-	};
-};
-
-&iomuxc_lpsr {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio_lpsr>;
-
-	pinctrl_gpio_lpsr: gpio1-grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1	0x59
-			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x59
-			MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3	0x59
-		>;
-	};
-
-	pinctrl_i2c1: i2c1-grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA	0x4000007f
-			MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL	0x4000007f
-		>;
-	};
-
-	pinctrl_cd_usdhc1: usdhc1-cd-grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x59 /* CD */
-		>;
-	};
-
-	pinctrl_uart1_ctrl2: uart1-ctrl2-grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x14 /* DSR */
-			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x14 /* RI */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
deleted file mode 100644
index a608a14d8c85..000000000000
--- a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Copyright 2016 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx7d-colibri.dtsi"
-#include "imx7-colibri-eval-v3.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri-imx7d-eval-v3", "toradex,colibri-imx7d",
-		     "fsl,imx7d";
-
-	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotg2_reg>;
-		regulator-name = "VCC_USB[1-4]";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
-		vin-supply = <&reg_5v0>;
-	};
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi
deleted file mode 100644
index 3c2cb502b388..000000000000
--- a/arch/arm/boot/dts/imx7d-colibri.dtsi
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright 2016 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "imx7d.dtsi"
-#include "imx7-colibri.dtsi"
-
-/ {
-	memory {
-		reg = <0x80000000 0x20000000>;
-	};
-};
-
-&usbotg2 {
-	dr_mode = "host";
-};
diff --git a/arch/arm/boot/dts/imx7d-pico.dts b/arch/arm/boot/dts/imx7d-pico.dts
deleted file mode 100644
index e78c2c9cc28a..000000000000
--- a/arch/arm/boot/dts/imx7d-pico.dts
+++ /dev/null
@@ -1,403 +0,0 @@
-/*
- * Copyright 2017 NXP
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx7d.dtsi"
-
-/ {
-	model = "Technexion Pico i.MX7D Board";
-	compatible = "technexion,imx7d-pico", "fsl,imx7d";
-
-	memory {
-		reg = <0x80000000 0x80000000>;
-	};
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 5 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg2_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_vref_1v8: regulator-vref-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "vref-1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "imx7-sgtl5000";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink_master>;
-		simple-audio-card,frame-master = <&dailink_master>;
-		simple-audio-card,cpu {
-			sound-dai = <&sai1>;
-		};
-
-		dailink_master: simple-audio-card,codec {
-			sound-dai = <&codec>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
-		};
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy0>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@1 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <1>;
-			status = "okay";
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@0a {
-		#sound-dai-cells = <0>;
-		reg = <0x0a>;
-		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_vref_1v8>;
-	};
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	status = "okay";
-
-	pmic: pfuze3000@08 {
-		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1a {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-			/* use sw1c_reg to align with pfuze100/pfuze200 */
-			sw1c_reg: sw1b {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vldo1 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vldo2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vccsd {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: v33 {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vldo4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&sai1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai1>;
-	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
-			  <&clks IMX7D_SAI1_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
-	assigned-clock-rates = <0>, <24576000>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
-	assigned-clock-rates = <400000000>;
-	bus-width = <8>;
-	no-1-8-v;
-	fsl,tuning-step = <2>;
-	non-removable;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x3
-			MX7D_PAD_SD2_WP__ENET1_MDC			0x3
-			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
-			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
-			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
-			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
-			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
-			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
-			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
-			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
-			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
-			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
-			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
-			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX7D_PAD_UART1_TX_DATA__I2C1_SDA	0x4000007f
-			MX7D_PAD_UART1_RX_DATA__I2C1_SCL	0x4000007f
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
-			MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
-		>;
-	};
-
-	pinctrl_sai1: sai1grp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK	0x1f
-			MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC	0x1f
-			MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
-			MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX7D_PAD_I2C4_SDA__UART5_DCE_TX		0x79
-			MX7D_PAD_I2C4_SCL__UART5_DCE_RX		0x79
-		>;
-	};
-
-	pinctrl_usbotg1_pwr: usbotg_pwr {
-		fsl,pins = <
-			MX7D_PAD_UART3_TX_DATA__GPIO4_IO5	0x14
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
-		>;
-	};
-};
-
-&iomuxc_lpsr {
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x74
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7d-sdb-sht11.dts b/arch/arm/boot/dts/imx7d-sdb-sht11.dts
deleted file mode 100644
index 64a20ed1713a..000000000000
--- a/arch/arm/boot/dts/imx7d-sdb-sht11.dts
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright (C) 2015 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "imx7d-sdb.dts"
-
-/ {
-	sensor {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sensor>;
-		compatible = "sensirion,sht15";
-		clk-gpios = <&gpio4 12 0>;
-		data-gpios = <&gpio4 13 0>;
-		vcc-supply = <&reg_sht15>;
-	};
-
-	reg_sht15: regulator-sht15 {
-		compatible = "regulator-fixed";
-		regulator-name = "reg_sht15";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&i2c3 {
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_sensor: sensorgrp {
-		fsl,pins = <
-			MX7D_PAD_I2C3_SDA__GPIO4_IO13	0x4000007f
-			MX7D_PAD_I2C3_SCL__GPIO4_IO12	0x4000007f
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
deleted file mode 100644
index 54c45402286b..000000000000
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ /dev/null
@@ -1,709 +0,0 @@
-/*
- * Copyright (C) 2015 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx7d.dtsi"
-
-/ {
-	model = "Freescale i.MX7 SabreSD Board";
-	compatible = "fsl,imx7d-sdb", "fsl,imx7d";
-
-	memory {
-		reg = <0x80000000 0x80000000>;
-	};
-
-	spi4 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_spi4>;
-		gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		extended_io: gpio-expander@0 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0>;
-			registers-number = <1>;
-			spi-max-frequency = <100000>;
-		};
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg2_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg2_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_can2_3v3: regulator-can2-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "can2-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_vref_1v8: regulator-vref-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "vref-1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	reg_brcm: regulator-brcm {
-		compatible = "regulator-fixed";
-		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-name = "brcm_reg";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_brcm_reg>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <200000>;
-	};
-};
-
-&adc1 {
-	vref-supply = <&reg_vref_1v8>;
-	status = "okay";
-};
-
-&adc2 {
-	vref-supply = <&reg_vref_1v8>;
-	status = "okay";
-};
-
-&cpu0 {
-	arm-supply = <&sw1a_reg>;
-};
-
-&ecspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	tsc2046@0 {
-		compatible = "ti,tsc2046";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-		pinctrl-names ="default";
-		pinctrl-0 = <&pinctrl_tsc2046_pendown>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <29 0>;
-		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
-		ti,x-min = /bits/ 16 <0>;
-		ti,x-max = /bits/ 16 <0>;
-		ti,y-min = /bits/ 16 <0>;
-		ti,y-max = /bits/ 16 <0>;
-		ti,pressure-max = /bits/ 16 <0>;
-		ti,x-plate-ohms = /bits/ 16 <400>;
-		wakeup-source;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy0>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 {
-			reg = <0>;
-		};
-
-		ethphy1: ethernet-phy@1 {
-			reg = <1>;
-		};
-	};
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy1>;
-	fsl,magic-packet;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic: pfuze3000@08 {
-		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1a {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			/* use sw1c_reg to align with pfuze100/pfuze200 */
-			sw1c_reg: sw1b {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vldo1 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vldo2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vccsd {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: v33 {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vldo4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	status = "okay";
-
-	codec: wm8960@1a {
-		compatible = "wlf,wm8960";
-		reg = <0x1a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
-		clock-names = "mclk";
-		wlf,shared-lrclk;
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display {
-		bits-per-pixel = <16>;
-		bus-width = <24>;
-
-		display-timings {
-			native-mode = <&timing0>;
-
-			timing0: timing0 {
-				clock-frequency = <9200000>;
-				hactive = <480>;
-				vactive = <272>;
-				hfront-porch = <8>;
-				hback-porch = <4>;
-				hsync-len = <41>;
-				vback-porch = <2>;
-				vfront-porch = <4>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
-
-&pcie {
-	reset-gpio = <&extended_io 1 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	status = "okay";
-};
-
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart6>;
-	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-	wakeup-source;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	wakeup-source;
-	keep-power-in-suspend;
-	non-removable;
-	vmmc-supply = <&reg_brcm>;
-	fsl,tuning-step = <2>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
-	assigned-clock-rates = <400000000>;
-	bus-width = <8>;
-	fsl,tuning-step = <2>;
-	non-removable;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx7d-sdb {
-		pinctrl_brcm_reg: brcmreggrp {
-			fsl,pins = <
-				MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x14
-			>;
-		};
-
-		pinctrl_ecspi3: ecspi3grp {
-			fsl,pins = <
-				MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO	0x2
-				MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI	0x2
-				MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK	0x2
-				MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x59
-			>;
-		};
-
-		pinctrl_enet1: enet1grp {
-			fsl,pins = <
-				MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x3
-				MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x3
-				MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
-				MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
-				MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
-				MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
-				MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
-				MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
-				MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
-				MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
-				MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
-				MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
-				MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
-				MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
-			>;
-		};
-
-		pinctrl_enet2: enet2grp {
-			fsl,pins = <
-				MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x1
-				MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x1
-				MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x1
-				MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x1
-				MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x1
-				MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x1
-				MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x1
-				MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x1
-				MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x1
-				MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x1
-				MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x1
-				MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x1
-			>;
-		};
-
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14
-				MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x34  /* bt reg on */
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
-				MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
-				MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
-				MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
-			>;
-		};
-
-		pinctrl_i2c4: i2c4grp {
-			fsl,pins = <
-				MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
-				MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
-			>;
-		};
-
-		pinctrl_lcdif: lcdifgrp {
-			fsl,pins = <
-				MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
-				MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
-				MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
-				MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
-				MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
-				MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
-				MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
-				MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
-				MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
-				MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
-				MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
-				MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
-				MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
-				MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
-				MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
-				MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
-				MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
-				MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
-				MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
-				MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
-				MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
-				MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
-				MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
-				MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
-				MX7D_PAD_LCD_CLK__LCD_CLK		0x79
-				MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
-				MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
-				MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
-				MX7D_PAD_LCD_RESET__LCD_RESET		0x79
-			>;
-		};
-
-		pinctrl_tsc2046_pendown: tsc2046_pendown {
-			fsl,pins = <
-				MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x59
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
-				MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX	0x79
-				MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX	0x79
-				MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS	0x79
-				MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS	0x79
-			>;
-		};
-
-		pinctrl_uart6: uart6grp {
-			fsl,pins = <
-				MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX	0x79
-				MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX	0x79
-				MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS	0x79
-				MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS	0x79
-			>;
-		};
-
-		pinctrl_usdhc1: usdhc1grp {
-			fsl,pins = <
-				MX7D_PAD_SD1_CMD__SD1_CMD		0x59
-				MX7D_PAD_SD1_CLK__SD1_CLK		0x19
-				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
-				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
-				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
-				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
-				MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59 /* CD */
-				MX7D_PAD_SD1_WP__GPIO5_IO1		0x59 /* WP */
-				MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x59 /* vmmc */
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX7D_PAD_SD2_CMD__SD2_CMD		0x59
-				MX7D_PAD_SD2_CLK__SD2_CLK		0x19
-				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
-				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
-				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
-				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
-			>;
-		};
-
-		pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
-			fsl,pins = <
-				MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
-				MX7D_PAD_SD2_CLK__SD2_CLK		0x1a
-				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a
-				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5a
-				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5a
-				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5a
-			>;
-		};
-
-		pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
-			fsl,pins = <
-				MX7D_PAD_SD2_CMD__SD2_CMD		0x5b
-				MX7D_PAD_SD2_CLK__SD2_CLK		0x1b
-				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5b
-				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5b
-				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5b
-				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5b
-			>;
-		};
-
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX7D_PAD_SD3_CMD__SD3_CMD		0x59
-				MX7D_PAD_SD3_CLK__SD3_CLK		0x19
-				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
-				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
-				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
-				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
-				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
-				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
-				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
-				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
-				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
-			fsl,pins = <
-				MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
-				MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
-				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
-				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
-				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
-				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
-				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
-				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
-				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
-				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
-				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1a
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
-			fsl,pins = <
-				MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
-				MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
-				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
-				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
-				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
-				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
-				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
-				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
-				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
-				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
-				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1b
-			>;
-		};
-	};
-};
-
-&iomuxc_lpsr {
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B		0x74
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT		0x110b0
-		>;
-
-		pinctrl_spi4: spi4grp {
-			fsl,pins = <
-				MX7D_PAD_GPIO1_IO09__GPIO1_IO9	0x59
-				MX7D_PAD_GPIO1_IO12__GPIO1_IO12	0x59
-				MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x59
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
deleted file mode 100644
index f46814a7ea44..000000000000
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Copyright 2015 Freescale Semiconductor, Inc.
- * Copyright 2016 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "imx7s.dtsi"
-#include <dt-bindings/reset/imx7-reset.h>
-
-/ {
-	cpus {
-		cpu0: cpu@0 {
-			operating-points = <
-				/* KHz	uV */
-				996000	1075000
-				792000	975000
-			>;
-			clock-frequency = <996000000>;
-		};
-
-		cpu1: cpu@1 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <1>;
-			clock-frequency = <996000000>;
-		};
-	};
-
-	soc {
-		etm@3007d000 {
-			compatible = "arm,coresight-etm3x", "arm,primecell";
-			reg = <0x3007d000 0x1000>;
-
-			/*
-			 * System will hang if added nosmp in kernel command line
-			 * without arm,primecell-periphid because amba bus try to
-			 * read id and core1 power off at this time.
-			 */
-			arm,primecell-periphid = <0xbb956>;
-			cpu = <&cpu1>;
-			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-			clock-names = "apb_pclk";
-
-			port {
-				etm1_out_port: endpoint {
-					remote-endpoint = <&ca_funnel_in_port1>;
-				};
-			};
-		};
-	};
-};
-
-&aips3 {
-	usbotg2: usb@30b20000 {
-		compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
-		reg = <0x30b20000 0x200>;
-		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks IMX7D_USB_CTRL_CLK>;
-		fsl,usbphy = <&usbphynop2>;
-		fsl,usbmisc = <&usbmisc2 0>;
-		phy-clkgate-delay-us = <400>;
-		status = "disabled";
-	};
-
-	usbmisc2: usbmisc@30b20200 {
-		#index-cells = <1>;
-		compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
-		reg = <0x30b20200 0x200>;
-	};
-
-	usbphynop2: usbphynop2 {
-		compatible = "usb-nop-xceiv";
-		clocks = <&clks IMX7D_USB_PHY2_CLK>;
-		clock-names = "main_clk";
-	};
-
-	fec2: ethernet@30bf0000 {
-		compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
-		reg = <0x30bf0000 0x10000>;
-		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
-			<&clks IMX7D_ENET_AXI_ROOT_CLK>,
-			<&clks IMX7D_ENET2_TIME_ROOT_CLK>,
-			<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
-			<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
-		clock-names = "ipg", "ahb", "ptp",
-			"enet_clk_ref", "enet_out";
-		fsl,num-tx-queues=<3>;
-		fsl,num-rx-queues=<3>;
-		status = "disabled";
-	};
-
-	pcie: pcie@0x33800000 {
-		compatible = "fsl,imx7d-pcie", "snps,dw-pcie";
-		reg = <0x33800000 0x4000>,
-		      <0x4ff00000 0x80000>;
-		reg-names = "dbi", "config";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x81000000 0 0          0x4ff80000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
-		num-lanes = <1>;
-		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "msi";
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0x7>;
-		interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
-			 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
-			 <&clks IMX7D_PCIE_PHY_ROOT_CLK>;
-		clock-names = "pcie", "pcie_bus", "pcie_phy";
-		assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>,
-				  <&clks IMX7D_PCIE_PHY_ROOT_SRC>;
-		assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>,
-					 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-
-		fsl,max-link-speed = <2>;
-		power-domains = <&pgc_pcie_phy>;
-		resets = <&src IMX7_RESET_PCIEPHY>,
-			 <&src IMX7_RESET_PCIE_CTRL_APPS_EN>;
-		reset-names = "pciephy", "apps";
-		status = "disabled";
-	};
-};
-
-&ca_funnel_ports {
-	port@1 {
-		reg = <1>;
-		ca_funnel_in_port1: endpoint {
-			slave-mode;
-			remote-endpoint = <&etm1_out_port>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
deleted file mode 100644
index bd2a49c1ade6..000000000000
--- a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright 2016 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx7s-colibri.dtsi"
-#include "imx7-colibri-eval-v3.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX7S on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri-imx7s-eval-v3", "toradex,colibri-imx7s",
-		     "fsl,imx7s";
-};
diff --git a/arch/arm/boot/dts/imx7s-colibri.dtsi b/arch/arm/boot/dts/imx7s-colibri.dtsi
deleted file mode 100644
index b81013455b21..000000000000
--- a/arch/arm/boot/dts/imx7s-colibri.dtsi
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright 2016 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "imx7s.dtsi"
-#include "imx7-colibri.dtsi"
-
-/ {
-	memory {
-		reg = <0x80000000 0x10000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
deleted file mode 100644
index 4cf6c458b583..000000000000
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ /dev/null
@@ -1,1025 +0,0 @@
-/*
- * Copyright 2015 Freescale Semiconductor, Inc.
- * Copyright 2016 Toradex AG
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/clock/imx7d-clock.h>
-#include <dt-bindings/power/imx7-power.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "imx7d-pinfunc.h"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	/*
-	 * The decompressor and also some bootloaders rely on a
-	 * pre-existing /chosen node to be available to insert the
-	 * command line and merge other ATAGS info.
-	 * Also for U-Boot there must be a pre-existing /memory node.
-	 */
-	chosen {};
-	memory { device_type = "memory"; reg = <0 0>; };
-
-	aliases {
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		gpio5 = &gpio6;
-		gpio6 = &gpio7;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		i2c3 = &i2c4;
-		mmc0 = &usdhc1;
-		mmc1 = &usdhc2;
-		mmc2 = &usdhc3;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-		serial6 = &uart7;
-		spi0 = &ecspi1;
-		spi1 = &ecspi2;
-		spi2 = &ecspi3;
-		spi3 = &ecspi4;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0>;
-			clock-frequency = <792000000>;
-			clock-latency = <61036>; /* two CLK32 periods */
-			clocks = <&clks IMX7D_CLK_ARM>;
-		};
-	};
-
-	ckil: clock-cki {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "ckil";
-	};
-
-	osc: clock-osc {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-output-names = "osc";
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gpc>;
-		ranges;
-
-		funnel@30041000 {
-			compatible = "arm,coresight-funnel", "arm,primecell";
-			reg = <0x30041000 0x1000>;
-			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-			clock-names = "apb_pclk";
-
-			ca_funnel_ports: ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				/* funnel input ports */
-				port@0 {
-					reg = <0>;
-					ca_funnel_in_port0: endpoint {
-						slave-mode;
-						remote-endpoint = <&etm0_out_port>;
-					};
-				};
-
-				/* funnel output port */
-				port@2 {
-					reg = <0>;
-					ca_funnel_out_port0: endpoint {
-						remote-endpoint = <&hugo_funnel_in_port0>;
-					};
-				};
-
-				/* the other input ports are not connect to anything */
-			};
-		};
-
-		etm@3007c000 {
-			compatible = "arm,coresight-etm3x", "arm,primecell";
-			reg = <0x3007c000 0x1000>;
-			cpu = <&cpu0>;
-			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-			clock-names = "apb_pclk";
-
-			port {
-				etm0_out_port: endpoint {
-					remote-endpoint = <&ca_funnel_in_port0>;
-				};
-			};
-		};
-
-		funnel@30083000 {
-			compatible = "arm,coresight-funnel", "arm,primecell";
-			reg = <0x30083000 0x1000>;
-			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-			clock-names = "apb_pclk";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				/* funnel input ports */
-				port@0 {
-					reg = <0>;
-					hugo_funnel_in_port0: endpoint {
-						slave-mode;
-						remote-endpoint = <&ca_funnel_out_port0>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					hugo_funnel_in_port1: endpoint {
-						slave-mode; /* M4 input */
-					};
-				};
-
-				port@2 {
-					reg = <0>;
-					hugo_funnel_out_port0: endpoint {
-						remote-endpoint = <&etf_in_port>;
-					};
-				};
-
-				/* the other input ports are not connect to anything */
-			};
-		};
-
-		etf@30084000 {
-			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0x30084000 0x1000>;
-			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-			clock-names = "apb_pclk";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					etf_in_port: endpoint {
-						slave-mode;
-						remote-endpoint = <&hugo_funnel_out_port0>;
-					};
-				};
-
-				port@1 {
-					reg = <0>;
-					etf_out_port: endpoint {
-						remote-endpoint = <&replicator_in_port0>;
-					};
-				};
-			};
-		};
-
-		etr@30086000 {
-			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0x30086000 0x1000>;
-			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-			clock-names = "apb_pclk";
-
-			port {
-				etr_in_port: endpoint {
-					slave-mode;
-					remote-endpoint = <&replicator_out_port1>;
-				};
-			};
-		};
-
-		tpiu@30087000 {
-			compatible = "arm,coresight-tpiu", "arm,primecell";
-			reg = <0x30087000 0x1000>;
-			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-			clock-names = "apb_pclk";
-
-			port {
-				tpiu_in_port: endpoint {
-					slave-mode;
-					remote-endpoint = <&replicator_out_port1>;
-				};
-			};
-		};
-
-		replicator {
-			/*
-			 * non-configurable replicators don't show up on the
-			 * AMBA bus.  As such no need to add "arm,primecell"
-			 */
-			compatible = "arm,coresight-replicator";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				/* replicator output ports */
-				port@0 {
-					reg = <0>;
-					replicator_out_port0: endpoint {
-						remote-endpoint = <&tpiu_in_port>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					replicator_out_port1: endpoint {
-						remote-endpoint = <&etr_in_port>;
-					};
-				};
-
-				/* replicator input port */
-				port@2 {
-					reg = <0>;
-					replicator_in_port0: endpoint {
-						slave-mode;
-						remote-endpoint = <&etf_out_port>;
-					};
-				};
-			};
-		};
-
-		intc: interrupt-controller@31001000 {
-			compatible = "arm,cortex-a7-gic";
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			interrupt-parent = <&intc>;
-			reg = <0x31001000 0x1000>,
-			      <0x31002000 0x2000>,
-			      <0x31004000 0x2000>,
-			      <0x31006000 0x2000>;
-		};
-
-		timer {
-			compatible = "arm,armv7-timer";
-			interrupt-parent = <&intc>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		};
-
-		aips1: aips-bus@30000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x30000000 0x400000>;
-			ranges;
-
-			gpio1: gpio@30200000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30200000 0x10000>;
-				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
-					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc_lpsr 0 0 8>, <&iomuxc 8 5 8>;
-			};
-
-			gpio2: gpio@30210000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30210000 0x10000>;
-				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 13 32>;
-			};
-
-			gpio3: gpio@30220000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30220000 0x10000>;
-				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 45 29>;
-			};
-
-			gpio4: gpio@30230000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30230000 0x10000>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 74 24>;
-			};
-
-			gpio5: gpio@30240000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30240000 0x10000>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 98 18>;
-			};
-
-			gpio6: gpio@30250000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30250000 0x10000>;
-				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 116 23>;
-			};
-
-			gpio7: gpio@30260000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30260000 0x10000>;
-				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 139 16>;
-			};
-
-			wdog1: wdog@30280000 {
-				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
-				reg = <0x30280000 0x10000>;
-				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
-			};
-
-			wdog2: wdog@30290000 {
-				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
-				reg = <0x30290000 0x10000>;
-				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_WDOG2_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			wdog3: wdog@302a0000 {
-				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
-				reg = <0x302a0000 0x10000>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_WDOG3_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			wdog4: wdog@302b0000 {
-				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
-				reg = <0x302b0000 0x10000>;
-				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_WDOG4_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			iomuxc_lpsr: iomuxc-lpsr@302c0000 {
-				compatible = "fsl,imx7d-iomuxc-lpsr";
-				reg = <0x302c0000 0x10000>;
-				fsl,input-sel = <&iomuxc>;
-			};
-
-			gpt1: gpt@302d0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x302d0000 0x10000>;
-				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_GPT1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-			};
-
-			gpt2: gpt@302e0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x302e0000 0x10000>;
-				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_GPT2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			gpt3: gpt@302f0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x302f0000 0x10000>;
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_GPT3_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			gpt4: gpt@30300000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x30300000 0x10000>;
-				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_GPT4_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			iomuxc: iomuxc@30330000 {
-				compatible = "fsl,imx7d-iomuxc";
-				reg = <0x30330000 0x10000>;
-			};
-
-			gpr: iomuxc-gpr@30340000 {
-				compatible = "fsl,imx7d-iomuxc-gpr",
-					"fsl,imx6q-iomuxc-gpr", "syscon";
-				reg = <0x30340000 0x10000>;
-			};
-
-			ocotp: ocotp-ctrl@30350000 {
-				compatible = "fsl,imx7d-ocotp", "syscon";
-				reg = <0x30350000 0x10000>;
-				clocks = <&clks IMX7D_OCOTP_CLK>;
-			};
-
-			anatop: anatop@30360000 {
-				compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
-					"syscon", "simple-bus";
-				reg = <0x30360000 0x10000>;
-				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-
-				reg_1p0d: regulator-vdd1p0d {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd1p0d";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1200000>;
-					anatop-reg-offset = <0x210>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <8>;
-					anatop-min-voltage = <800000>;
-					anatop-max-voltage = <1200000>;
-					anatop-enable-bit = <0>;
-				};
-			};
-
-			snvs: snvs@30370000 {
-				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
-				reg = <0x30370000 0x10000>;
-
-				snvs_rtc: snvs-rtc-lp {
-					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					regmap = <&snvs>;
-					offset = <0x34>;
-					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				snvs_poweroff: snvs-poweroff {
-					compatible = "syscon-poweroff";
-					regmap = <&snvs>;
-					offset = <0x38>;
-					mask = <0x60>;
-				};
-
-				snvs_pwrkey: snvs-powerkey {
-					compatible = "fsl,sec-v4.0-pwrkey";
-					regmap = <&snvs>;
-					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-					linux,keycode = <KEY_POWER>;
-					wakeup-source;
-				};
-			};
-
-			clks: ccm@30380000 {
-				compatible = "fsl,imx7d-ccm";
-				reg = <0x30380000 0x10000>;
-				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				#clock-cells = <1>;
-				clocks = <&ckil>, <&osc>;
-				clock-names = "ckil", "osc";
-			};
-
-			src: src@30390000 {
-				compatible = "fsl,imx7d-src", "syscon";
-				reg = <0x30390000 0x10000>;
-				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-				#reset-cells = <1>;
-			};
-
-			gpc: gpc@303a0000 {
-				compatible = "fsl,imx7d-gpc";
-				reg = <0x303a0000 0x10000>;
-				interrupt-controller;
-				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <3>;
-				interrupt-parent = <&intc>;
-				#power-domain-cells = <1>;
-
-				pgc {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					pgc_pcie_phy: pgc-power-domain@IMX7_POWER_DOMAIN_PCIE_PHY {
-						#power-domain-cells = <0>;
-						reg = <IMX7_POWER_DOMAIN_PCIE_PHY>;
-						power-supply = <&reg_1p0d>;
-					};
-				};
-			};
-		};
-
-		aips2: aips-bus@30400000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x30400000 0x400000>;
-			ranges;
-
-			adc1: adc@30610000 {
-				compatible = "fsl,imx7d-adc";
-				reg = <0x30610000 0x10000>;
-				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
-				clock-names = "adc";
-				status = "disabled";
-			};
-
-			adc2: adc@30620000 {
-				compatible = "fsl,imx7d-adc";
-				reg = <0x30620000 0x10000>;
-				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
-				clock-names = "adc";
-				status = "disabled";
-			};
-
-			ecspi4: ecspi@30630000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
-				reg = <0x30630000 0x10000>;
-				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
-					<&clks IMX7D_ECSPI4_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			pwm1: pwm@30660000 {
-				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
-				reg = <0x30660000 0x10000>;
-				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
-					 <&clks IMX7D_PWM1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			pwm2: pwm@30670000 {
-				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
-				reg = <0x30670000 0x10000>;
-				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
-					 <&clks IMX7D_PWM2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			pwm3: pwm@30680000 {
-				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
-				reg = <0x30680000 0x10000>;
-				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
-					 <&clks IMX7D_PWM3_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			pwm4: pwm@30690000 {
-				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
-				reg = <0x30690000 0x10000>;
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
-					 <&clks IMX7D_PWM4_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			lcdif: lcdif@30730000 {
-				compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
-				reg = <0x30730000 0x10000>;
-				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
-					<&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>;
-				clock-names = "pix", "axi";
-				status = "disabled";
-			};
-		};
-
-		aips3: aips-bus@30800000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x30800000 0x400000>;
-			ranges;
-
-			ecspi1: ecspi@30820000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
-				reg = <0x30820000 0x10000>;
-				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
-					<&clks IMX7D_ECSPI1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			ecspi2: ecspi@30830000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
-				reg = <0x30830000 0x10000>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
-					<&clks IMX7D_ECSPI2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			ecspi3: ecspi@30840000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
-				reg = <0x30840000 0x10000>;
-				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
-					<&clks IMX7D_ECSPI3_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart1: serial@30860000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30860000 0x10000>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART1_ROOT_CLK>,
-					<&clks IMX7D_UART1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart2: serial@30890000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30890000 0x10000>;
-				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART2_ROOT_CLK>,
-					<&clks IMX7D_UART2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart3: serial@30880000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30880000 0x10000>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART3_ROOT_CLK>,
-					<&clks IMX7D_UART3_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			sai1: sai@308a0000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
-				reg = <0x308a0000 0x10000>;
-				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_SAI1_IPG_CLK>,
-					 <&clks IMX7D_SAI1_ROOT_CLK>,
-					 <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_CLK_DUMMY>;
-				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dma-names = "rx", "tx";
-				dmas = <&sdma 8 24 0>, <&sdma 9 24 0>;
-				status = "disabled";
-			};
-
-			sai2: sai@308b0000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
-				reg = <0x308b0000 0x10000>;
-				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_SAI2_IPG_CLK>,
-					 <&clks IMX7D_SAI2_ROOT_CLK>,
-					 <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_CLK_DUMMY>;
-				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dma-names = "rx", "tx";
-				dmas = <&sdma 10 24 0>, <&sdma 11 24 0>;
-				status = "disabled";
-			};
-
-			sai3: sai@308c0000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
-				reg = <0x308c0000 0x10000>;
-				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_SAI3_IPG_CLK>,
-					 <&clks IMX7D_SAI3_ROOT_CLK>,
-					 <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_CLK_DUMMY>;
-				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dma-names = "rx", "tx";
-				dmas = <&sdma 12 24 0>, <&sdma 13 24 0>;
-				status = "disabled";
-			};
-
-			flexcan1: can@30a00000 {
-				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
-				reg = <0x30a00000 0x10000>;
-				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CAN1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			flexcan2: can@30a10000 {
-				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
-				reg = <0x30a10000 0x10000>;
-				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CAN2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			i2c1: i2c@30a20000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a20000 0x10000>;
-				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@30a30000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a30000 0x10000>;
-				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@30a40000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a40000 0x10000>;
-				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			i2c4: i2c@30a50000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a50000 0x10000>;
-				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			uart4: serial@30a60000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a60000 0x10000>;
-				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART4_ROOT_CLK>,
-					<&clks IMX7D_UART4_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart5: serial@30a70000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a70000 0x10000>;
-				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART5_ROOT_CLK>,
-					<&clks IMX7D_UART5_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart6: serial@30a80000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a80000 0x10000>;
-				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART6_ROOT_CLK>,
-					<&clks IMX7D_UART6_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart7: serial@30a90000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a90000 0x10000>;
-				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART7_ROOT_CLK>,
-					<&clks IMX7D_UART7_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			usbotg1: usb@30b10000 {
-				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
-				reg = <0x30b10000 0x200>;
-				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_USB_CTRL_CLK>;
-				fsl,usbphy = <&usbphynop1>;
-				fsl,usbmisc = <&usbmisc1 0>;
-				phy-clkgate-delay-us = <400>;
-				status = "disabled";
-			};
-
-			usbh: usb@30b30000 {
-				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
-				reg = <0x30b30000 0x200>;
-				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_USB_CTRL_CLK>;
-				fsl,usbphy = <&usbphynop3>;
-				fsl,usbmisc = <&usbmisc3 0>;
-				phy_type = "hsic";
-				dr_mode = "host";
-				phy-clkgate-delay-us = <400>;
-				status = "disabled";
-			};
-
-			usbmisc1: usbmisc@30b10200 {
-				#index-cells = <1>;
-				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
-				reg = <0x30b10200 0x200>;
-			};
-
-			usbmisc3: usbmisc@30b30200 {
-				#index-cells = <1>;
-				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
-				reg = <0x30b30200 0x200>;
-			};
-
-			usbphynop1: usbphynop1 {
-				compatible = "usb-nop-xceiv";
-				clocks = <&clks IMX7D_USB_PHY1_CLK>;
-				clock-names = "main_clk";
-			};
-
-			usbphynop3: usbphynop3 {
-				compatible = "usb-nop-xceiv";
-				clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
-				clock-names = "main_clk";
-			};
-
-			usdhc1: usdhc@30b40000 {
-				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x30b40000 0x10000>;
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
-					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
-					<&clks IMX7D_USDHC1_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc2: usdhc@30b50000 {
-				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x30b50000 0x10000>;
-				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
-					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
-					<&clks IMX7D_USDHC2_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			usdhc3: usdhc@30b60000 {
-				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x30b60000 0x10000>;
-				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
-					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
-					<&clks IMX7D_USDHC3_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
-
-			sdma: sdma@30bd0000 {
-				compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
-				reg = <0x30bd0000 0x10000>;
-				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_SDMA_CORE_CLK>,
-					 <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <3>;
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
-			};
-
-			fec1: ethernet@30be0000 {
-				compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
-				reg = <0x30be0000 0x10000>;
-				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
-					<&clks IMX7D_ENET_AXI_ROOT_CLK>,
-					<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
-					<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
-					<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "ptp",
-					"enet_clk_ref", "enet_out";
-				fsl,num-tx-queues=<3>;
-				fsl,num-rx-queues=<3>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
deleted file mode 100644
index e8b249f92fb3..000000000000
--- a/arch/arm/boot/dts/integratorap.dts
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * Device Tree for the ARM Integrator/AP platform
- */
-
-/dts-v1/;
-/include/ "integrator.dtsi"
-
-/ {
-	model = "ARM Integrator/AP";
-	compatible = "arm,integrator-ap";
-	dma-ranges = <0x80000000 0x0 0x80000000>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			/*
-			 * Since the board has pluggable CPU modules, we
-			 * cannot define a proper compatible here. Let the
-			 * boot loader fill in the apropriate compatible
-			 * string if necessary.
-			 */
-			/* compatible = "arm,arm926ej-s"; */
-			reg = <0>;
-			/*
-			 * The documentation in ARM DUI 0138E page 3-12 states
-			 * that the maximum frequency for this clock is 200 MHz
-			 * but painful trial-and-error has proved to me that it
-			 * is actually just hanging the system above 71 MHz.
-			 * Sad but true.
-			 */
-					 /* kHz     uV   */
-			operating-points = <71000  0
-					    66000  0
-					    60000  0
-					    48000  0
-					    36000  0
-					    24000  0
-					    12000  0>;
-			clocks = <&cmosc>;
-			clock-names = "cpu";
-			clock-latency = <1000000>; /* 1 ms */
-		};
-	};
-
-	aliases {
-		arm,timer-primary = &timer2;
-		arm,timer-secondary = &timer1;
-	};
-
-	chosen {
-		bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk";
-	};
-
-	/* 24 MHz chrystal on the Integrator/AP development board */
-	xtal24mhz: xtal24mhz@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	pclk: pclk@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	/* The UART clock is 14.74 MHz divided by an ICS525 */
-	uartclk: uartclk@14.74M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <14745600>;
-		clocks = <&xtal24mhz>;
-	};
-
-	core-module@10000000 {
-		/* 24 MHz chrystal on the core module */
-		cm24mhz: cm24mhz@24M {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-
-		/* Oscillator on the core module, clocks the CPU core */
-		cmosc: cmosc@24M {
-			compatible = "arm,syscon-icst525-integratorap-cm";
-			#clock-cells = <0>;
-			lock-offset = <0x14>;
-			vco-offset = <0x08>;
-			clocks = <&cm24mhz>;
-		};
-
-		/* Auxilary oscillator on the core module, 32.369MHz at boot */
-		auxosc: auxosc@24M {
-			compatible = "arm,syscon-icst525";
-			#clock-cells = <0>;
-			lock-offset = <0x14>;
-			vco-offset = <0x1c>;
-			clocks = <&cm24mhz>;
-		};
-	};
-
-	syscon {
-		compatible = "arm,integrator-ap-syscon", "syscon";
-		reg = <0x11000000 0x100>;
-		interrupt-parent = <&pic>;
-		/* These are the logical module IRQs */
-		interrupts = <9>, <10>, <11>, <12>;
-
-		/*
-		 * SYSCLK clocks PCIv3 bridge, system controller and the
-		 * logic modules.
-		 */
-		sysclk: apsys@24M {
-			compatible = "arm,syscon-icst525-integratorap-sys";
-			#clock-cells = <0>;
-			lock-offset = <0x1c>;
-			vco-offset = <0x04>;
-			clocks = <&xtal24mhz>;
-		};
-
-		/* One-bit control for the PCI bus clock (33 or 25 MHz) */
-		pciclk: pciclk@24M {
-			compatible = "arm,syscon-icst525-integratorap-pci";
-			#clock-cells = <0>;
-			lock-offset = <0x1c>;
-			vco-offset = <0x04>;
-			clocks = <&xtal24mhz>;
-		};
-	};
-
-	timer0: timer@13000000 {
-		compatible = "arm,integrator-timer";
-		clocks = <&xtal24mhz>;
-	};
-
-	timer1: timer@13000100 {
-		compatible = "arm,integrator-timer";
-		clocks = <&xtal24mhz>;
-	};
-
-	timer2: timer@13000200 {
-		compatible = "arm,integrator-timer";
-		clocks = <&xtal24mhz>;
-	};
-
-	pic: pic@14000000 {
-		valid-mask = <0x003fffff>;
-	};
-
-	pci: pciv3@62000000 {
-		compatible = "v3,v360epc-pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0x62000000 0x10000>;
-		interrupt-parent = <&pic>;
-		interrupts = <17>; /* Bus error IRQ */
-		ranges = <0x00000000 0 0x61000000 /* config space */
-			0x61000000 0 0x00100000 /* 16 MiB @ 61000000 */
-			0x01000000 0 0x0 /* I/O space */
-			0x60000000 0 0x00100000 /* 16 MiB @ 60000000 */
-			0x02000000 0 0x00000000 /* non-prefectable memory */
-			0x40000000 0 0x10000000 /* 256 MiB @ 40000000 */
-			0x42000000 0 0x10000000 /* prefetchable memory */
-			0x50000000 0 0x10000000>; /* 256 MiB @ 50000000 */
-		interrupt-map-mask = <0xf800 0 0 0x7>;
-		interrupt-map = <
-		/* IDSEL 9 */
-		0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */
-		0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */
-		0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */
-		0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */
-		/* IDSEL 10 */
-		0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */
-		0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */
-		0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */
-		0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */
-		/* IDSEL 11 */
-		0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */
-		0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */
-		0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */
-		0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */
-		/* IDSEL 12 */
-		0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */
-		0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */
-		0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */
-		0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */
-		>;
-	};
-
-	fpga {
-		/*
-		 * The Integator/AP predates the idea to have magic numbers
-		 * identifying the PrimeCell in hardware, thus we have to
-		 * supply these from the device tree.
-		 */
-		rtc: rtc@15000000 {
-			compatible = "arm,pl030", "arm,primecell";
-			arm,primecell-periphid = <0x00041030>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		uart0: uart@16000000 {
-			compatible = "arm,pl010", "arm,primecell";
-			arm,primecell-periphid = <0x00041010>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		uart1: uart@17000000 {
-			compatible = "arm,pl010", "arm,primecell";
-			arm,primecell-periphid = <0x00041010>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		kmi0: kmi@18000000 {
-			compatible = "arm,pl050", "arm,primecell";
-			arm,primecell-periphid = <0x00041050>;
-			clocks = <&xtal24mhz>, <&pclk>;
-			clock-names = "KMIREFCLK", "apb_pclk";
-		};
-
-		kmi1: kmi@19000000 {
-			compatible = "arm,pl050", "arm,primecell";
-			arm,primecell-periphid = <0x00041050>;
-			clocks = <&xtal24mhz>, <&pclk>;
-			clock-names = "KMIREFCLK", "apb_pclk";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel/Makefile b/arch/arm/boot/dts/intel/Makefile
new file mode 100644
index 000000000000..c5fc845deb61
--- /dev/null
+++ b/arch/arm/boot/dts/intel/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+subdir-y += axm
+subdir-y += ixp
+subdir-y += pxa
+subdir-y += socfpga
diff --git a/arch/arm/boot/dts/intel/axm/Makefile b/arch/arm/boot/dts/intel/axm/Makefile
new file mode 100644
index 000000000000..7c7dc679964d
--- /dev/null
+++ b/arch/arm/boot/dts/intel/axm/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_AXXIA) += \
+	axm5516-amarillo.dtb
+dtb-$(CONFIG_ARCH_AXXIA) += \
+	axm5516-amarillo.dtb
diff --git a/arch/arm/boot/dts/intel/axm/axm5516-amarillo.dts b/arch/arm/boot/dts/intel/axm/axm5516-amarillo.dts
new file mode 100644
index 000000000000..2e2ad3c7ee77
--- /dev/null
+++ b/arch/arm/boot/dts/intel/axm/axm5516-amarillo.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/arm/boot/dts/axm5516-amarillo.dts
+ *
+ * Copyright (C) 2013 LSI
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x00000000 0x00400000;
+
+#include "axm55xx.dtsi"
+#include "axm5516-cpus.dtsi"
+
+/ {
+	model = "Amarillo AXM5516";
+	compatible = "lsi,axm5516-amarillo", "lsi,axm5516";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0x02 0x00000000>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/axm5516-cpus.dtsi b/arch/arm/boot/dts/intel/axm/axm5516-cpus.dtsi
index b85f360cb125..f13ef80b6637 100644
--- a/arch/arm/boot/dts/axm5516-cpus.dtsi
+++ b/arch/arm/boot/dts/intel/axm/axm5516-cpus.dtsi
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * arch/arm/boot/dts/axm5516-cpus.dtsi
  *
  * Copyright (C) 2013 LSI
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 / {
@@ -77,7 +73,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x00>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -85,7 +81,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x01>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -93,7 +89,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x02>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -101,7 +97,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x03>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -109,7 +105,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x100>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -117,7 +113,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x101>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -125,7 +121,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x102>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -133,7 +129,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x103>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -141,7 +137,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x200>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -149,7 +145,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x201>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -157,7 +153,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x202>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -165,7 +161,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x203>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -173,7 +169,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x300>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -181,7 +177,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x301>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -189,7 +185,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x302>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -197,7 +193,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x303>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 	};
diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/intel/axm/axm55xx.dtsi
index 47799f59faa5..5277890cfad2 100644
--- a/arch/arm/boot/dts/axm55xx.dtsi
+++ b/arch/arm/boot/dts/intel/axm/axm55xx.dtsi
@@ -1,20 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * arch/arm/boot/dts/axm55xx.dtsi
  *
  * Copyright (C) 2013 LSI
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/lsi,axm5516-clks.h>
 
-#include "skeleton64.dtsi"
-
 / {
+	#address-cells = <2>;
+	#size-cells = <2>;
 	interrupt-parent = <&gic>;
 
 	aliases {
@@ -112,7 +108,7 @@
 			#size-cells = <2>;
 			ranges;
 
-			serial0: uart@2010080000 {
+			serial0: serial@2010080000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x20 0x10080000 0 0x1000>;
 				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
@@ -121,7 +117,7 @@
 				status = "disabled";
 			};
 
-			serial1: uart@2010081000 {
+			serial1: serial@2010081000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x20 0x10081000 0 0x1000>;
 				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
@@ -130,7 +126,7 @@
 				status = "disabled";
 			};
 
-			serial2: uart@2010082000 {
+			serial2: serial@2010082000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x20 0x10082000 0 0x1000>;
 				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
@@ -139,7 +135,7 @@
 				status = "disabled";
 			};
 
-			serial3: uart@2010083000 {
+			serial3: serial@2010083000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x20 0x10083000 0 0x1000>;
 				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/intel/ixp/Makefile b/arch/arm/boot/dts/intel/ixp/Makefile
new file mode 100644
index 000000000000..cb30d8d55016
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/Makefile
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_IXP4XX) += \
+	intel-ixp42x-actiontec-mi424wr-ac.dtb \
+	intel-ixp42x-actiontec-mi424wr-d.dtb \
+	intel-ixp42x-linksys-nslu2.dtb \
+	intel-ixp42x-linksys-wrv54g.dtb \
+	intel-ixp42x-freecom-fsg-3.dtb \
+	intel-ixp42x-welltech-epbx100.dtb \
+	intel-ixp42x-ixdp425.dtb \
+	intel-ixp43x-kixrp435.dtb \
+	intel-ixp46x-ixdp465.dtb \
+	intel-ixp42x-adi-coyote.dtb \
+	intel-ixp42x-ixdpg425.dtb \
+	intel-ixp42x-goramo-multilink.dtb \
+	intel-ixp42x-iomega-nas100d.dtb \
+	intel-ixp42x-dlink-dsm-g600.dtb \
+	intel-ixp42x-gateworks-gw2348.dtb \
+	intel-ixp43x-gateworks-gw2358.dtb \
+	intel-ixp42x-netgear-wg302v1.dtb \
+	intel-ixp42x-arcom-vulcan.dtb \
+	intel-ixp42x-gateway-7001.dtb \
+	intel-ixp42x-usrobotics-usr8200.dtb
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts
new file mode 100644
index 000000000000..413b9255f9e3
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the IXP425-based Actiontec MI424WR revision A and C
+ * Based on a board file from OpenWrt by Jose Vasconcellos.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x-actiontec-mi424wr.dtsi"
+
+/ {
+	model = "Actiontec MI424WR rev A/C";
+	compatible = "actiontec,mi424wr-ac", "intel,ixp42x";
+
+	soc {
+		/* EthB used for WAN */
+		ethernet@c8009000 {
+			phy-handle = <&phy17>; // 17 on revision A-C
+
+			mdio {
+				phy17: ethernet-phy@17 {
+					/* WAN */
+					reg = <17>;
+				};
+			};
+		};
+
+		/* EthC used for LAN */
+		ethernet@c800a000 {
+			/* Fixed link to the CPU MII port on the KS8995 */
+			fixed-link {
+				speed = <100>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts
new file mode 100644
index 000000000000..3619c6411a5c
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the IXP425-based Actiontec MI424WR revision D
+ * Based on a board file from OpenWrt by Jose Vasconcellos.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x-actiontec-mi424wr.dtsi"
+
+/ {
+	model = "Actiontec MI424WR rev D";
+	compatible = "actiontec,mi424wr-d", "intel,ixp42x";
+
+	soc {
+		/* EthB used for LAN */
+		ethernet@c8009000 {
+			/* Fixed link to the CPU MII port on the KS8995 */
+			fixed-link {
+				speed = <100>;
+				full-duplex;
+			};
+
+			mdio {
+				/* PHY ID 0x00221450 */
+				phy5: ethernet-phy@5 {
+					/* WAN */
+					reg = <5>;
+				};
+			};
+		};
+
+		/* EthC used for WAN */
+		ethernet@c800a000 {
+			phy-handle = <&phy5>; // 5 on revision D
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi
new file mode 100644
index 000000000000..76fd97c5beb6
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the IXP425-based Actiontec MI424WR
+ * Based on a board file from OpenWrt by Jose Vasconcellos.
+ */
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart1:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-wan-coax {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "wan-coax";
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-power-alarm {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_ALARM;
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-power {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-wireless {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led-internet-down {
+			color = <LED_COLOR_ID_RED>;
+			function = "internet-down";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-internet-up {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "internet-up";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-lan-coax {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "lan-coax";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-wan-ethernet-alarm {
+			color = <LED_COLOR_ID_RED>;
+			function = "wan-ethernet-alarm";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		/* The last three LEDs are not mounted but traces exist on the PCB */
+		led-phone-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "phone-1";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led-phone-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "phone-2";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led-voip {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "voip";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		ethernet-switch@0 {
+			compatible = "micrel,ks8995";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-port@0 {
+					reg = <0>;
+					label = "lan1";
+					phy-mode = "mii";
+					phy-handle = <&phy1>;
+				};
+				ethernet-port@1 {
+					reg = <1>;
+					label = "lan2";
+					phy-mode = "mii";
+					phy-handle = <&phy2>;
+				};
+				ethernet-port@2 {
+					reg = <2>;
+					label = "lan3";
+					phy-mode = "mii";
+					phy-handle = <&phy3>;
+				};
+				ethernet-port@3 {
+					reg = <3>;
+					label = "lan4";
+					phy-mode = "mii";
+					phy-handle = <&phy4>;
+				};
+				ethernet-port@4 {
+					reg = <4>;
+					ethernet = <&ethc>;
+					phy-mode = "mii";
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+			};
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 8 MB of Flash in 64 0x20000 sized blocks
+				 * mapped in at CS0.
+				 */
+				reg = <0 0x00000000 0x0800000>;
+
+				/* Configure expansion bus to allow writes */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					fis-index-block = <0x3f>;
+				};
+			};
+			gpio1: gpio@1,0 {
+				/* MMIO GPIO at CS1 */
+				compatible = "intel,ixp4xx-expansion-bus-mmio-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+				big-endian;
+				reg = <1 0x00000000 0x2>;
+				reg-names = "dat";
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				pci-reset-hog {
+					gpio-hog;
+					gpios = <7 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "PCI reset";
+				};
+				pstn-relay-hog-1 {
+					gpio-hog;
+					gpios = <11 GPIO_ACTIVE_HIGH>;
+					output-low;
+					line-name = "PSTN relay control 1";
+				};
+				pstn-relay-hog-2 {
+					gpio-hog;
+					gpios = <12 GPIO_ACTIVE_HIGH>;
+					output-low;
+					line-name = "PSTN relay control 2";
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 13 */
+			<0x6800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 8 */
+			<0x6800 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 6 */
+			/* IDSEL 14 */
+			<0x7000 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 7 */
+			<0x7000 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 8 */
+			/* IDSEL 15 */
+			<0x7800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 15 is irq 6 */
+			<0x7800 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT B on slot 15 is irq 7 */
+		};
+
+		ethb: ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "mii";
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* 1, 2, 3 and 4 are ports on the KS8995 switch */
+				phy1: ethernet-phy@1 {
+					/* LAN1 */
+					reg = <1>;
+				};
+				phy2: ethernet-phy@2 {
+					/* LAN2 */
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					/* LAN3 */
+					reg = <3>;
+				};
+				phy4: ethernet-phy@4 {
+					/* LAN4 */
+					reg = <4>;
+				};
+			};
+		};
+
+		ethc: ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "mii";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-adi-coyote.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-adi-coyote.dts
new file mode 100644
index 000000000000..765ab36e6f0c
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-adi-coyote.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for ADI Engineering Coyote platform.
+ * Derived from boardfiles written by MontaVista software.
+ * Ethernet set-up from OpenWrt.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "ADI Engineering Coyote reference design";
+	compatible = "adieng,coyote", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* CHECKME: 16 MB SDRAM minimum, maybe the Coyote actually has more */
+		device_type = "memory";
+		reg = <0x00000000 0x01000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+		stdout-path = "uart1:115200n8";
+	};
+
+	aliases {
+		/* These are switched around */
+		serial0 = &uart1;
+		serial1 = &uart0;
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 32 MB of Flash in 128 0x20000 sized blocks
+				 * mapped in at CS0 and CS1
+				 */
+				reg = <0 0x00000000 0x2000000>;
+
+				/* Configure expansion bus to allow writes */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* CHECKME: guess this is Redboot FIS */
+					fis-index-block = <0x1ff>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from Coyote PCI boardfile.
+			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
+			 * each handling all IRQs.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 6 */
+			<0x0800 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 6 */
+			<0x0800 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 6 */
+			<0x0800 0 0 4 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 6 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 11 */
+			<0x1000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 11 */
+			<0x1000 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 11 */
+			<0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 11 */
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy4: ethernet-phy@4 {
+					reg = <4>;
+				};
+
+				phy5: ethernet-phy@5 {
+					reg = <5>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy4>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-arcom-vulcan.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-arcom-vulcan.dts
new file mode 100644
index 000000000000..6f5b4e4eb1cc
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-arcom-vulcan.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Arcom/Eurotech Vulcan board.
+ * This board is a single board computer in the PC/104 form factor based on
+ * IXP425, and was released around 2005. It previously had the name "Mercury".
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Arcom/Eurotech Vulcan";
+	compatible = "arcom,vulcan", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		/* CHECKME: using a harddrive at /dev/sda1 as rootfs by default */
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootfstype=ext4 rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&gpio0 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 32 MB of Flash in 0x20000 byte blocks
+				 * mapped in at CS0 and CS1.
+				 *
+				 * The documentation mentions the existence
+				 * of a 16MB version, which we conveniently
+				 * ignore. Shout if you own one!
+				 */
+				reg = <0 0x00000000 0x2000000>;
+
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-t3 = <3>;
+				intel,ixp4xx-eb-byte-access-on-halfword = <1>;
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					fis-index-block = <0x1ff>;
+				};
+			};
+			sram@2,0 {
+				/* 256 KB SDRAM memory at CS2 */
+				compatible = "shared-dma-pool";
+				device_type = "memory";
+				reg = <2 0x00000000 0x40000>;
+				no-map;
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-t3 = <1>;
+				intel,ixp4xx-eb-t4 = <2>;
+				intel,ixp4xx-eb-ahb-split-transfers = <1>;
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+			};
+			serial@3,0 {
+				/*
+				 * 8250-compatible Exar XR16L2551 2 x UART
+				 *
+				 * CHECKME: if special tweaks are needed, then fix the
+				 * operating system to handle it.
+				 */
+				compatible = "exar,xr16l2551", "ns8250";
+				reg = <3 0x00000000 0x10>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+				clock-frequency = <1843200>;
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-t3 = <3>;
+				intel,ixp4xx-eb-cycle-type = <1>; /* Motorola cycles */
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+			};
+			gpio1: gpio@4,0 {
+				/*
+				 * MMIO GPIO in one byte
+				 */
+				compatible = "arcom,vulcan-gpio";
+				reg = <4 0x00000000 0x1>;
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+			};
+			watchdog@5,0 {
+				compatible = "maxim,max6369";
+				reg = <5 0x00000000 0x1>;
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from Vulcan PCI boardfile.
+			 *
+			 * We have 2 slots (IDSEL) 1 and 2 with one dedicated interrupt
+			 * per slot. This interrupt is shared (OR:ed) by all four pins.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 2 */
+			<0x0800 0 0 2 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 2 */
+			<0x0800 0 0 3 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 2 */
+			<0x0800 0 0 4 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 2 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 3 */
+			<0x1000 0 0 2 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 3 */
+			<0x1000 0 0 3 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 3 */
+			<0x1000 0 0 4 &gpio0 3 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 3 */
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-dlink-dsm-g600.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-dlink-dsm-g600.dts
new file mode 100644
index 000000000000..fa133c913606
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-dlink-dsm-g600.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for D-Link DSM-G600 revision A based on IXP420
+ * NOTE: revision B of this device uses PowerPC and is NOT supported by
+ * this device tree.
+ *
+ * Inspired by the boardfile by Rod Whitby, Tower Technologies, Alessandro Zummo
+ * and Michael Westerhof.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "D-Link DSM-G600 rev A";
+	compatible = "dlink,dsm-g600-a", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-power {
+			label = "dsmg600:green:power";
+			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-wlan {
+			label = "dsmg600:green:wlan";
+			/* CHECKME: flagged as active low in the old board file */
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			/* We don't have WLAN trigger in the kernel (yet) */
+			linux,default-trigger = "netdev";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys_polled {
+		compatible = "gpio-keys-polled";
+
+		/*
+		 * According to the board file this key cannot handle interrupts and
+		 * need to be polled. Investigate if this is really the case or if
+		 * this can be moved adjacent to the ordinary gpio-keys above.
+		 */
+		button-power {
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@51 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+		timeout-ms = <5000>;
+	};
+
+	soc {
+		bus@c4000000 {
+			/* The first 16MB region at CS0 on the expansion bus */
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 16 MB of Flash in 128 0x20000 sized blocks
+				 * mapped in at CS0.
+				 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/*
+					 * A boot log says the directory is at 0xfe0000
+					 * 0x7f * 0x20000 = 0xfe0000
+					 */
+					fis-index-block = <0x7f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from DSM-G600 PCI boardfile (dsmg600-pci.c)
+			 * We have slots (IDSEL) 1, 2, 3, 4 and pins 1, 2 and 3.
+			 * Only slot 3 have three IRQs.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 7  IRQ_TYPE_LEVEL_LOW>, /* INT E on slot 1 is irq 7 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 11 */
+			/* IDSEL 3 */
+			<0x1800 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 10 */
+			<0x1800 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 9 */
+			<0x1800 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 8 */
+			/* IDSEL 4 */
+			<0x2000 0 0 3 &gpio0 6  IRQ_TYPE_LEVEL_LOW>; /* INT F on slot 4 is irq 6 */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-freecom-fsg-3.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-freecom-fsg-3.dts
new file mode 100644
index 000000000000..73d3c11dd0d4
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-freecom-fsg-3.dts
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Freecom FSG-3 router.
+ * This machine is based on IXP425.
+ * This device tree is inspired by the board file by Rod Whitby.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Freecom FSG-3";
+	compatible = "freecom,fsg-3", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB memory */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		/* Boot from the first partition on the hard drive */
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootfstype=ext4 rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-sync {
+			wakeup-source;
+			/* Closest approximation of what the key should do */
+			linux,code = <KEY_CONNECT>;
+			label = "sync";
+			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		};
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+		button-usb {
+			wakeup-source;
+			/* Unplug USB, closest approximation of what the key should do */
+			linux,code = <KEY_EJECTCD>;
+			label = "usb";
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 12 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 13 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hwmon@28 {
+			/*
+			 * Temperature sensor and fan control chip.
+			 *
+			 * TODO: create a proper device tree binding for
+			 * the sensor and temperature zone and create a
+			 * zone with fan control.
+			 */
+			compatible = "winbond,w83781d";
+			reg = <0x28>;
+		};
+		rtc@6f {
+			compatible = "isil,isl1208";
+			reg = <0x6f>;
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 4 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x400000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x3e0000 */
+					fis-index-block = <0x1f>;
+				};
+			};
+
+			/* Small syscon with some LEDs at CS2 */
+			syscon@2,0 {
+				compatible = "freecom,fsg-cs2-system-controller", "syscon";
+				reg = <2 0x0 0x200>;
+				reg-io-width = <2>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <2 0x0 0x0 0x200>;
+
+				led@0,0 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x01>;
+					label = "fsg:blue:wlan";
+					linux,default-trigger = "wlan";
+					default-state = "on";
+				};
+				led@0,1 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x02>;
+					label = "fsg:blue:wan";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+				led@0,2 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x04>;
+					label = "fsg:blue:sata";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+				led@0,3 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x04>;
+					label = "fsg:blue:usb";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+				led@0,4 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x08>;
+					label = "fsg:blue:sync";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+				led@0,5 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x10>;
+					label = "fsg:blue:ring";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Written based on the FSG-3 PCI boardfile.
+			 * We have slots 12, 13 & 14 (IDSEL) with one IRQ each.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 12 */
+			<0x6000 0 0 1 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 5 */
+			<0x6000 0 0 2 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 5 */
+			<0x6000 0 0 3 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 5 */
+			<0x6000 0 0 4 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 5 */
+			/* IDSEL 13 */
+			<0x6800 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 7 */
+			<0x6800 0 0 2 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 7 */
+			<0x6800 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 7 */
+			<0x6800 0 0 4 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 7 */
+			/* IDSEL 14 */
+			<0x7000 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 6 */
+			<0x7000 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 6 */
+			<0x7000 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 6 */
+			<0x7000 0 0 4 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 6 */
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy4: ethernet-phy@4 {
+					reg = <4>;
+				};
+
+				phy5: ethernet-phy@5 {
+					reg = <5>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy4>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
new file mode 100644
index 000000000000..6d5e69035f94
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Gateway 7001 AP based on IXP422
+ * Derived from boardfiles written by Imre Kaloz
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Gateway 7001 AP";
+	compatible = "gateway,7001", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart1:115200n8";
+	};
+
+	aliases {
+		/* second UART is the primary console */
+		serial0 = &uart1;
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 8 MB of flash
+				 */
+				reg = <0 0x00000000 0x800000>;
+
+				/* Configure expansion bus to allow writes */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x7e0000 */
+					fis-index-block = <0x3f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from Gateway 7001 PCI boardfile (gateway7001-pci.c)
+			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
+			 * each handling all IRQs.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 11 */
+			<0x0800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 11 */
+			<0x0800 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 11 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 10 */
+			<0x1000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 10 */
+			<0x1000 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 10 */
+		};
+
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy2>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateworks-gw2348.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateworks-gw2348.dts
new file mode 100644
index 000000000000..97e3f25bb210
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateworks-gw2348.dts
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Gateworks Avila GW2348 board.
+ * This machine is based on IXP425.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Gateworks Avila GW2348";
+	compatible = "gateworks,gw2348", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-user {
+			label = "gw2348:green:user";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hwmon@28 {
+			compatible = "adi,ad7418";
+			reg = <0x28>;
+		};
+		rtc: ds1672@68 {
+			compatible = "dallas,ds1672";
+			reg = <0x68>;
+		};
+		eeprom@51 {
+			compatible = "atmel,24c08";
+			reg = <0x51>;
+			pagesize = <16>;
+			size = <1024>;
+			read-only;
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 16 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x0fe0000 */
+					fis-index-block = <0x7f>;
+				};
+			};
+			ide@1,0 {
+				compatible = "intel,ixp4xx-compact-flash";
+				/*
+				 * Set up expansion bus config to a really slow timing.
+				 * The CF driver will dynamically reconfigure these timings
+				 * depending on selected PIO mode (0-4).
+				 */
+				intel,ixp4xx-eb-t1 = <3>; // 3 cycles extra address phase
+				intel,ixp4xx-eb-t2 = <3>; // 3 cycles extra setup phase
+				intel,ixp4xx-eb-t3 = <15>; // 15 cycles extra strobe phase
+				intel,ixp4xx-eb-t4 = <3>; // 3 cycles extra hold phase
+				intel,ixp4xx-eb-t5 = <15>; // 15 cycles extra recovery phase
+				intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle type
+				intel,ixp4xx-eb-byte-access-on-halfword = <1>;
+				intel,ixp4xx-eb-mux-address-and-data = <0>;
+				intel,ixp4xx-eb-ahb-split-transfers = <0>;
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+				/* First register set is CMD second is CTL (notice it uses CS2) */
+				reg = <1 0x00000000 0x1000000>, <2 0x00000000 0x1000000>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+			};
+			/*
+			 * FIXME: Latch LEDs or extra UARTs at CS4
+			 */
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from Avila PCI boardfile.
+			 *
+			 * We have up to 4 slots (IDSEL) with 4 swizzled IRQs.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+			<0x0800 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+			<0x0800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+			<0x1000 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 8 */
+			<0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 11 */
+			/* IDSEL 3 */
+			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+			<0x1800 0 0 2 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
+			<0x1800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 11 */
+			<0x1800 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 10 */
+			/* IDSEL 4 */
+			<0x2000 0 0 1 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 4 is irq 8 */
+			<0x2000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 4 is irq 11 */
+			<0x2000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 4 is irq 10 */
+			<0x2000 0 0 4 &gpio0 9  IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 4 is irq 9 */
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
new file mode 100644
index 000000000000..5f4c849915db
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Goramo MultiLink Router
+ * There are two variants:
+ * - MultiLink Basic (a box)
+ * - MultiLink Max (19" rack mount)
+ * This device tree supports MultiLink Basic.
+ * This machine is based on IXP425.
+ * This is one of the few devices supporting the IXP4xx High-Speed Serial
+ * (HSS) link for a V.35 WAN interface.
+ * The hardware originates in Poland.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Goramo MultiLink Router";
+	compatible = "goramo,multilink-router", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/*
+		 * 64 MB of RAM according to the manual. The MultiLink
+		 * Max has 128 MB.
+		 */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	/*
+	 * 74HC4094 which is used as a rudimentary GPIO expander
+	 * FIXME:
+	 * - Create device tree bindings for this as GPIO expander
+	 * - Write a pure DT GPIO driver using these bindings
+	 * - Support cascading in the style of gpio-74x164.c (cannot be reused, very different)
+	 */
+	gpio_74: gpio-74hc4094 {
+		compatible = "nxp,74hc4094";
+		cp-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+		d-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+		str-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+		/* oe-gpios is optional */
+		gpio-controller;
+		#gpio-cells = <2>;
+		/* We are not cascaded */
+		registers-number = <1>;
+		gpio-line-names = "CONTROL_HSS0_CLK_INT", "CONTROL_HSS1_CLK_INT", "CONTROL_HSS0_DTR_N",
+				"CONTROL_HSS1_DTR_N", "CONTROL_EXT", "CONTROL_AUTO_RESET",
+				"CONTROL_PCI_RESET_N", "CONTROL_EEPROM_WC_N";
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 16 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x0fe0000 */
+					fis-index-block = <0x7f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * The device has 4 slots (IDSEL) with one dedicated IRQ per slot.
+			 * The slots have Ethernet, Ethernet, NEC and MPCI.
+			 * The IDSELs are 11, 12, 13, 14.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 11 - Ethernet A */
+			<0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */
+			<0x5800 0 0 2 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 11 is irq 4 */
+			<0x5800 0 0 3 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 11 is irq 4 */
+			<0x5800 0 0 4 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 11 is irq 4 */
+			/* IDSEL 12 - Ethernet B */
+			<0x6000 0 0 1 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 5 */
+			<0x6000 0 0 2 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 5 */
+			<0x6000 0 0 3 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 5 */
+			<0x6000 0 0 4 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 5 */
+			/* IDSEL 13 - MPCI */
+			<0x6800 0 0 1 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 12 */
+			<0x6800 0 0 2 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 12 */
+			<0x6800 0 0 3 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 12 */
+			<0x6800 0 0 4 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 12 */
+			/* IDSEL 14 - NEC */
+			<0x7000 0 0 1 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 3 */
+			<0x7000 0 0 2 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 3 */
+			<0x7000 0 0 3 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 3 */
+			<0x7000 0 0 4 &gpio0 3 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 3 */
+		};
+
+		/* HSS links */
+		npe@c8006000 {
+			hss@0 {
+				status = "okay";
+				intel,queue-chl-rxtrig = <&qmgr 12>;
+				intel,queue-chl-txready = <&qmgr 34>;
+				intel,queue-pkt-rx = <&qmgr 13>;
+				intel,queue-pkt-tx = <&qmgr 14>, <&qmgr 15>, <&qmgr 16>, <&qmgr 17>;
+				intel,queue-pkt-rxfree = <&qmgr 18>, <&qmgr 19>, <&qmgr 20>, <&qmgr 21>;
+				intel,queue-pkt-txdone = <&qmgr 22>;
+				/* The Goramo GPIO-based clock etc control */
+				cts-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+				rts-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+				dcd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+				dtr-gpios = <&gpio_74 2 GPIO_ACTIVE_LOW>;
+				clk-internal-gpios = <&gpio_74 0 GPIO_ACTIVE_HIGH>;
+			};
+			hss@1 {
+				status = "okay";
+				intel,queue-chl-rxtrig = <&qmgr 10>;
+				intel,queue-chl-txready = <&qmgr 35>;
+				intel,queue-pkt-rx = <&qmgr 0>;
+				intel,queue-pkt-tx = <&qmgr 5>, <&qmgr 6>, <&qmgr 7>, <&qmgr 8>;
+				intel,queue-pkt-rxfree = <&qmgr 1>, <&qmgr 2>, <&qmgr 3>, <&qmgr 4>;
+				intel,queue-pkt-txdone = <&qmgr 9>;
+				/* The Goramo GPIO-based clock etc control */
+				cts-gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+				rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+				dcd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+				dtr-gpios = <&gpio_74 3 GPIO_ACTIVE_LOW>;
+				clk-internal-gpios = <&gpio_74 1 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 32>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 33>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-iomega-nas100d.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-iomega-nas100d.dts
new file mode 100644
index 000000000000..26f02dad6a54
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-iomega-nas100d.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Iomega NAS 100D
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Iomega NAS 100D";
+	compatible = "iom,nas-100d", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-wlan {
+			label = "nas100d:red:wlan";
+			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			/* We don't have WLAN trigger in the kernel (yet) */
+			linux,default-trigger = "netdev";
+		};
+		led-disk {
+			label = "nas100d:red:disk";
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "disk-activity";
+		};
+		led-power {
+			label = "nas100d:red:power";
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-power {
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		};
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@51 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		timeout-ms = <5000>;
+	};
+
+	soc {
+		bus@c4000000 {
+			/* The first 16MB region at CS0 on the expansion bus */
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 8 MB of Flash in 0x20000 byte blocks
+				 * mapped in at CS0.
+				 */
+				reg = <0 0x00000000 0x800000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x7e0000 */
+					fis-index-block = <0x3f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from NAS 100D PCI boardfile (nas100d-pci.c)
+			 * We have slots (IDSEL) 1, 2 and 3 and pins 1, 2 and 3.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			/* IDSEL 3 */
+			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+			<0x1800 0 0 2 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
+			<0x1800 0 0 3 &gpio0 7  IRQ_TYPE_LEVEL_LOW>; /* INT C on slot 3 is irq 7 */
+		};
+
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-ixdp425.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-ixdp425.dts
new file mode 100644
index 000000000000..194945748dc3
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-ixdp425.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Intel IXDP425 also known as IXCDP1100 Control Plane
+ * processor reference design.
+ *
+ * This platform has the codename "Richfield".
+ *
+ * This machine is based on a 533 MHz IXP425.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include "intel-ixp4xx-reference-design.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Intel IXDP425/IXCDP1100 Richfield Reference Design";
+	compatible = "intel,ixdp425", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 16 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x0fe0000 */
+					fis-index-block = <0x7f>;
+				};
+			};
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-ixdpg425.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-ixdpg425.dts
new file mode 100644
index 000000000000..7011fea6205b
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-ixdpg425.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Intel IXDPG425 reference design.
+ * Derived from boardfiles written by MontaVista software.
+ * Ethernet set-up from OpenWrt.
+ *
+ * The device has 4 x FXS RJ11 ports for analog phones for
+ * internet telephony. (Not supported yet.)
+ *
+ * The device has 9 status LEDs we do not support yet.
+ *
+ * This device is very similar to ADI engingeering Coyote.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Intel IXDPG425 reference design";
+	compatible = "intel,ixdpg425", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * CHECKME: the product brief says 16MB in a flash
+				 * socket.
+				 */
+				reg = <0 0x00000000 0x1000000>;
+
+				/* Configure expansion bus to allow writes */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* CHECKME: guess this is Redboot FIS */
+					fis-index-block = <0x7f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from IXDPG425 PCI boardfile.
+			 * We have slots (IDSEL) 12, 13 and 14 with one assigned IRQ
+			 * for 12 & 13 and one for 14.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 12 */
+			<0x6000 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 7 */
+			<0x6000 0 0 2 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 7 */
+			<0x6000 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 7 */
+			<0x6000 0 0 4 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 7 */
+			/* IDSEL 13 */
+			<0x6800 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 7 */
+			<0x6800 0 0 2 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 7 */
+			<0x6800 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 7 */
+			<0x6800 0 0 4 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 7 */
+			/* IDSEL 14 */
+			<0x7000 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 6 */
+			<0x7000 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 6 */
+			<0x7000 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 6 */
+			<0x7000 0 0 4 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 6 */
+		};
+
+		/*
+		 * CHECKME: this ethernet setup seems dubious. Photos of the board shows some kind
+		 * of Realtek DSA switch on the board.
+		 */
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy4: ethernet-phy@4 {
+					reg = <4>;
+				};
+
+				phy5: ethernet-phy@5 {
+					reg = <5>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy4>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts
new file mode 100644
index 000000000000..2f7c34c649ea
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Linksys NSLU2
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Linksys NSLU2 (Network Storage Link for USB 2.0 Disk Drives)";
+	compatible = "linksys,nslu2", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-status {
+			label = "nslu2:red:status";
+			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-ready {
+			label = "nslu2:green:ready";
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		led-disk-1 {
+			label = "nslu2:green:disk-1";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led-disk-2 {
+			label = "nslu2:green:disk-2";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-power {
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+		};
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@6f {
+			compatible = "xicor,x1205";
+			reg = <0x6f>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		timeout-ms = <5000>;
+	};
+
+	gpio_pwm: pwm {
+		#pwm-cells = <3>;
+		compatible = "pwm-gpio";
+		gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&gpio_pwm 0 1 0>;
+		beeper-hz = <1000>;
+	};
+
+	soc {
+		bus@c4000000 {
+			/* The first 16MB region at CS0 on the expansion bus */
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/*
+				 * 8 MB of Flash in 0x20000 byte blocks
+				 * mapped in at CS0.
+				 */
+				reg = <0 0x00000000 0x800000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x7e0000 */
+					fis-index-block = <0x3f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from NSLU2 PCI boardfile, INT A, B, C swizzled D constant
+			 * We have slots (IDSEL) 1, 2 and 3.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+			<0x0800 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+			<0x0800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+			<0x1000 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 11 */
+			<0x1000 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 8 */
+			/* IDSEL 3 */
+			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+			<0x1800 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 11 */
+			<0x1800 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 10 */
+			<0x1800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 3 is irq 8 */
+		};
+
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-wrv54g.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-wrv54g.dts
new file mode 100644
index 000000000000..cb1842c83ac8
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-wrv54g.dts
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Linksys WRV54G router
+ * Also known as Gemtek GTWX5715
+ * Based on a board file by George T. Joseph and other patches.
+ * This machine is based on IXP425.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Linksys WRV54G / Gemtek GTWX5715";
+	compatible = "linksys,wrv54g", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB memory */
+		device_type = "memory";
+		reg = <0x00000000 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart1:115200n8";
+	};
+
+	aliases {
+		/* UART2 is the primary console */
+		serial0 = &uart1;
+		serial1 = &uart0;
+	};
+
+	/* There is an unpopulated LED slot (3) connected to GPIO 8 */
+	leds {
+		compatible = "gpio-leds";
+		led-power {
+			label = "wrv54g:yellow:power";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-wireless {
+			label = "wrv54g:yellow:wireless";
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		led-internet {
+			label = "wrv54g:yellow:internet";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		led-dmz {
+			label = "wrv54g:green:dmz";
+			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	/* This set-up comes from an OpenWrt patch */
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		ethernet-switch@0 {
+			compatible = "micrel,ks8995";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+
+			/*
+			 * The PHYs are accessed over the external MDIO
+			 * bus and not internally through the switch control
+			 * registers.
+			 */
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-port@0 {
+					reg = <0>;
+					label = "1";
+					phy-mode = "mii";
+					phy-handle = <&phy1>;
+				};
+				ethernet-port@1 {
+					reg = <1>;
+					label = "2";
+					phy-mode = "mii";
+					phy-handle = <&phy2>;
+				};
+				ethernet-port@2 {
+					reg = <2>;
+					label = "3";
+					phy-mode = "mii";
+					phy-handle = <&phy3>;
+				};
+				ethernet-port@3 {
+					reg = <3>;
+					label = "4";
+					phy-mode = "mii";
+					phy-handle = <&phy4>;
+				};
+				ethernet-port@4 {
+					reg = <4>;
+					ethernet = <&ethb>;
+					phy-mode = "mii";
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+			};
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 8 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x00800000>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					/*
+					 * Partition info from a boot log
+					 * CHECKME: not using redboot? FIS index 0x3f @7e00000?
+					 */
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "boot";
+						reg = <0x0 0x140000>;
+						read-only;
+					};
+					partition@140000 {
+						label = "linux";
+						reg = <0x140000 0x100000>;
+						read-only;
+					};
+					partition@240000 {
+						label = "root";
+						reg = <0x240000 0x480000>;
+						read-write;
+					};
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * We have up to 2 slots (IDSEL) with 2 swizzled IRQs.
+			 * Derived from the GTWX5715 PCI boardfile.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 0 */
+			<0x0000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 0 is irq 10 */
+			<0x0000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 0 is irq 11 */
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT B on slot 1 is irq 10 */
+		};
+
+		/*
+		 * EthB connects to the KS8995 CPU port and faces ports 1-4
+		 * through the switch fabric.
+		 *
+		 * To complicate things, the MDIO channel is also only
+		 * accessible through EthB, but used independently for PHY
+		 * control.
+		 */
+		ethb: ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "mii";
+			fixed-link {
+				speed = <100>;
+				full-duplex;
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/*
+				 * LAN ports 1-4 on the KS8995 switch
+				 * and PHY5 for WAN need to be accessed
+				 * through this external MDIO channel.
+				 */
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					reg = <3>;
+				};
+				phy4: ethernet-phy@4 {
+					reg = <4>;
+				};
+				phy5: ethernet-phy@5 {
+					reg = <5>;
+				};
+			};
+		};
+
+		/*
+		 * EthC connects to MII-P5 on the KS8995 bypassing
+		 * all of the switch logic and facing PHY5
+		 */
+		ethc: ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "mii";
+			phy-handle = <&phy5>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts
new file mode 100644
index 000000000000..a351a97d257e
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Netgear WG302v2 based on IXP422BB
+ * Derived from boardfiles written by Imre Kaloz
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Netgear WG302 v1";
+	compatible = "netgear,wg302v1", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB SDRAM according to boot arguments */
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	chosen {
+		/* The RedBoot comes up in 9600 baud so let's keep this */
+		bootargs = "console=ttyS0,9600n8";
+		stdout-path = "uart1:9600n8";
+	};
+
+	aliases {
+		/* These are switched around */
+		serial0 = &uart1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		test_led: led-test {
+			color = <LED_COLOR_ID_AMBER>;
+			function = "test";
+			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		wlan_led: led-wlan {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "phy0tx";
+		};
+	};
+
+	gpio_keys {
+		/* RESET is on GPIO13 which can't fire interrupts */
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		button-reset {
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 8 MB of Flash in 64 0x20000 sized blocks
+				 * mapped in at CS0.
+				 */
+				reg = <0 0x00000000 0x800000>;
+
+				/* Configure expansion bus to allow writes */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					fis-index-block = <0x3f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from WG302 v1 PCI boardfile (wg302v1-pci.c)
+			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
+			 * each handling all IRQs.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 8 */
+			<0x0800 0 0 2 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 8 */
+			<0x0800 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 8 */
+			<0x0800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 10 */
+			<0x1000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 10 */
+			<0x1000 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 10 */
+		};
+
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy30>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy30: ethernet-phy@30 {
+					reg = <30>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
new file mode 100644
index 000000000000..2c89db34c8d8
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the USRobotics USR8200 firewall
+ * VPN and NAS. Based on know-how from Peter Denison.
+ *
+ * This machine is based on IXP422, the USR internal codename
+ * is "Jeeves".
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "USRobotics USR8200";
+	compatible = "usr,usr8200", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart1:115200n8";
+	};
+
+	aliases {
+		/* These are switched around */
+		serial0 = &uart1;
+		serial1 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		ieee1394_led: led-1394 {
+			label = "usr8200:green:1394";
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		usb1_led: led-usb1 {
+			label = "usr8200:green:usb1";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		usb2_led: led-usb2 {
+			label = "usr8200:green:usb2";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		wireless_led: led-wireless {
+			/*
+			 * This LED is mounted inside the case but cannot be
+			 * seen from the outside: probably USR planned at one
+			 * point for the device to have a wireless card, then
+			 * changed their mind and didn't mount it, leaving the
+			 * LED in place.
+			 */
+			label = "usr8200:green:wireless";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		pwr_led: led-pwr {
+			label = "usr8200:green:pwr";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 16 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x0fe0000 */
+					fis-index-block = <0x7f>;
+				};
+			};
+			rtc@2,0 {
+				/* EPSON RTC7301 DG DIL-capsule */
+				compatible = "epson,rtc7301dg";
+				/*
+				 * These timing settings were found in the boardfile patch:
+				 * IXP4XX_EXP_CS2 = 0x3fff000 | IXP4XX_EXP_BUS_SIZE(0) | IXP4XX_EXP_BUS_WR_EN |
+				 *                  IXP4XX_EXP_BUS_CS_EN | IXP4XX_EXP_BUS_BYTE_EN;
+				 */
+				intel,ixp4xx-eb-t1 = <0>; // no cycles extra address phase
+				intel,ixp4xx-eb-t2 = <0>; // no cycles extra setup phase
+				intel,ixp4xx-eb-t3 = <15>; // 15 cycles extra strobe phase
+				intel,ixp4xx-eb-t4 = <3>; // 3 cycles extra hold phase
+				intel,ixp4xx-eb-t5 = <15>; // 15 cycles extra recovery phase
+				intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle
+				intel,ixp4xx-eb-byte-access-on-halfword = <0>;
+				intel,ixp4xx-eb-mux-address-and-data = <0>;
+				intel,ixp4xx-eb-ahb-split-transfers = <0>;
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+				/* 512 bytes at CS2 */
+				reg = <2 0x00000000 0x0000200>;
+				reg-io-width = <1>;
+				native-endian;
+				/* FIXME: try to check if there is an IRQ for the RTC? */
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from USR8200 boardfile from OpenWrt
+			 *
+			 * We have 3 slots (IDSEL) with partly swizzled IRQs on slot 16.
+			 * We assume the same IRQ for all pins on the remaining slots, that
+			 * is what the boardfile was doing.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 14 used for "Wireless" in the board file */
+			<0x7000 0 0 1 &gpio0 7  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 7 */
+			/* IDSEL 15 used for VIA VT6307 IEEE 1394 Firewire */
+			<0x7800 0 0 1 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 15 is irq 8 */
+			/* IDSEL 16 used for VIA VT6202 USB 2.0 4+1 */
+			<0x8000 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 16 is irq 11 */
+			<0x8000 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 16 is irq 10 */
+			<0x8000 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>; /* INT C on slot 16 is irq 9 */
+		};
+
+		gpio@c8004000 {
+			/* Enable clock out on GPIO 15 */
+			intel,ixp4xx-gpio15-clkout;
+		};
+
+		/* EthB WAN */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy9>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/*
+				 * PHY 0..4 are internal to the MV88E6060 switch but appear
+				 * as independent devices.
+				 */
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					reg = <3>;
+				};
+
+				/* Altima AMI101L used by the WAN port */
+				phy9: ethernet-phy@9 {
+					reg = <9>;
+				};
+
+				/* The switch uses MDIO addresses 16 thru 31 */
+				switch@16 {
+					compatible = "marvell,mv88e6060";
+					reg = <16>;
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+							label = "lan1";
+							phy-handle = <&phy0>;
+						};
+
+						port@1 {
+							reg = <1>;
+							label = "lan2";
+							phy-handle = <&phy1>;
+						};
+
+						port@2 {
+							reg = <2>;
+							label = "lan3";
+							phy-handle = <&phy2>;
+						};
+
+						port@3 {
+							reg = <3>;
+							label = "lan4";
+							phy-handle = <&phy3>;
+						};
+
+						port@5 {
+							/* Port 5 is the CPU port according to the MV88E6060 datasheet */
+							reg = <5>;
+							phy-mode = "rgmii-id";
+							ethernet = <&ethc>;
+							label = "cpu";
+							fixed-link {
+								speed = <100>;
+								full-duplex;
+							};
+						};
+					};
+				};
+			};
+		};
+
+		/* EthC LAN connected to the Marvell DSA Switch */
+		ethc: ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			fixed-link {
+				speed = <100>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-welltech-epbx100.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-welltech-epbx100.dts
new file mode 100644
index 000000000000..c550c421b659
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-welltech-epbx100.dts
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+
+/ {
+	model = "Welltech EPBX100";
+	compatible = "welltech,epbx100", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/ram0 initrd=0x00800000,9M";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 16 MB of Flash
+				 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "RedBoot";
+						reg = <0x00000000 0x00080000>;
+						read-only;
+					};
+					partition@80000 {
+						label = "zImage";
+						reg = <0x00080000 0x00100000>;
+						read-only;
+					};
+					partition@180000 {
+						label = "ramdisk";
+						reg = <0x00180000 0x00300000>;
+						read-only;
+					};
+					partition@480000 {
+						label = "User";
+						reg = <0x00480000 0x00b60000>;
+						read-only;
+					};
+					partition@fe0000 {
+						label = "FIS directory";
+						reg = <0x00fe0000 0x001f000>;
+						read-only;
+					};
+					partition@fff000 {
+						label = "RedBoot config";
+						reg = <0x00fff000 0x0001000>;
+						read-only;
+					};
+				};
+			};
+		};
+
+		/* LAN port */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy5: ethernet-phy@5 {
+					reg = <5>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp42x.dtsi
new file mode 100644
index 000000000000..84cee8ec3ab8
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Intel XScale Network Processors
+ * in the IXP 42x series. This series has 32 interrupts.
+ */
+#include "intel-ixp4xx.dtsi"
+
+/ {
+	soc {
+		bus@c4000000 {
+			compatible = "intel,ixp42x-expansion-bus-controller", "syscon";
+			reg = <0xc4000000 0x30>;
+		};
+
+		pci@c0000000 {
+			compatible = "intel,ixp42x-pci";
+		};
+
+		interrupt-controller@c8003000 {
+			compatible = "intel,ixp42x-interrupt";
+		};
+
+		/*
+		 * This is the USB Device Mode (UDC) controller, which is used
+		 * to present the IXP4xx as a device on a USB bus.
+		 */
+		usb@c800b000 {
+			compatible = "intel,ixp4xx-udc";
+			reg = <0xc800b000 0x1000>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp43x-gateworks-gw2358.dts
new file mode 100644
index 000000000000..1db849515f9e
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp43x-gateworks-gw2358.dts
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Gateworks IXP43x-based Cambria GW2358
+ */
+
+/dts-v1/;
+
+#include "intel-ixp43x.dtsi"
+
+/ {
+	model = "Gateworks Cambria GW2358";
+	compatible = "gateworks,gw2358", "intel,ixp43x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-user {
+			label = "gw2358:green:LED";
+			gpios = <&pld1 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hwmon@28 {
+			compatible = "adi,ad7418";
+			reg = <0x28>;
+		};
+		rtc: ds1672@68 {
+			compatible = "dallas,ds1672";
+			reg = <0x68>;
+		};
+		eeprom@51 {
+			compatible = "atmel,24c08";
+			reg = <0x51>;
+			pagesize = <16>;
+			size = <1024>;
+			read-only;
+		};
+		pld0: pld@56 {
+			compatible = "gateworks,pld-gpio";
+			reg = <0x56>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		/* This PLD just handles the LED and user button */
+		pld1: pld@57 {
+			compatible = "gateworks,pld-gpio";
+			reg = <0x57>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/*
+				 * 32 MB of Flash in 0x20000 byte blocks
+				 * mapped in at CS0 and CS1
+				 */
+				reg = <0 0x00000000 0x2000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x1fe0000 */
+					fis-index-block = <0xff>;
+				};
+			};
+			ide@3,0 {
+				compatible = "intel,ixp4xx-compact-flash";
+				/*
+				 * Set up expansion bus config to a really slow timing.
+				 * The CF driver will dynamically reconfigure these timings
+				 * depending on selected PIO mode (0-4).
+				 */
+				intel,ixp4xx-eb-t1 = <3>; // 3 cycles extra address phase
+				intel,ixp4xx-eb-t2 = <3>; // 3 cycles extra setup phase
+				intel,ixp4xx-eb-t3 = <15>; // 15 cycles extra strobe phase
+				intel,ixp4xx-eb-t4 = <3>; // 3 cycles extra hold phase
+				intel,ixp4xx-eb-t5 = <15>; // 15 cycles extra recovery phase
+				intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle type
+				intel,ixp4xx-eb-byte-access-on-halfword = <1>;
+				intel,ixp4xx-eb-mux-address-and-data = <0>;
+				intel,ixp4xx-eb-ahb-split-transfers = <0>;
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+				/* First register set is CMD second is CTL */
+				reg = <3 0xe00000 0x40000>, <3 0xe40000 0x40000>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * In the boardfile for the Cambria from OpenWRT the interrupts
+			 * are assigned one per IDSEL, so all 4 interrupts from IDSEL
+			 * 1 are connected to IRQ 11, all 4 interrupts from IDSEL 2
+			 * connected to IRQ 10 etc. I find this highly unlikely so I
+			 * have instead assumed that they are rotated (swizzled) like
+			 * this with 11, 10, 9, 8 for the 4 pins on IDSEL 1 etc.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+			<0x0800 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+			<0x0800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+			<0x1000 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 8 */
+			<0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 11 */
+			/* IDSEL 3 */
+			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+			<0x1800 0 0 2 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
+			<0x1800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 11 */
+			<0x1800 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 10 */
+			/* IDSEL 4 */
+			<0x2000 0 0 1 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 8 */
+			<0x2000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 11 */
+			<0x2000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 10 */
+			<0x2000 0 0 4 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 9 */
+			/* IDSEL 6 */
+			<0x3000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 10 */
+			<0x3000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 9 */
+			<0x3000 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 8 */
+			<0x3000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 11 */
+			/* IDSEL 15 */
+			<0x7800 0 0 1 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 8 */
+			<0x7800 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 11 */
+			<0x7800 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 10 */
+			<0x7800 0 0 4 &gpio0 9  IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 3 is irq 9 */
+		};
+
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+			};
+		};
+
+		ethernet@c800c000 {
+			status = "okay";
+			queue-rx = <&qmgr 2>;
+			queue-txready = <&qmgr 19>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy2>;
+			intel,npe-handle = <&npe 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp43x-kixrp435.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp43x-kixrp435.dts
new file mode 100644
index 000000000000..4703a8b24765
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp43x-kixrp435.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Intel KIXRP435 Control Plane
+ * processor reference design.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp43x.dtsi"
+#include "intel-ixp4xx-reference-design.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Intel KIXRP435 Reference Design";
+	compatible = "intel,kixrp435", "intel,ixp43x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 16 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x0fe0000 */
+					fis-index-block = <0x7f>;
+				};
+			};
+		};
+
+		/* CHECKME: ethernet set-up taken from Gateworks Cambria */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+			};
+		};
+
+		ethernet@c800c000 {
+			status = "okay";
+			queue-rx = <&qmgr 2>;
+			queue-txready = <&qmgr 19>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy2>;
+			intel,npe-handle = <&npe 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp43x.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp43x.dtsi
new file mode 100644
index 000000000000..60bf9903e0f8
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp43x.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Intel XScale Network Processors
+ * in the IXP 43x series. This series has 64 interrupts and adds a few more
+ * peripherals over the 42x series.
+ */
+#include "intel-ixp4xx.dtsi"
+
+/ {
+	soc {
+		bus@c4000000 {
+			compatible = "intel,ixp43x-expansion-bus-controller", "syscon";
+			/* Uses at least up to 0x230 */
+			reg = <0xc4000000 0x1000>;
+		};
+
+		pci@c0000000 {
+			compatible = "intel,ixp43x-pci";
+		};
+
+		interrupt-controller@c8003000 {
+			compatible = "intel,ixp43x-interrupt";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp45x-ixp46x.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp45x-ixp46x.dtsi
new file mode 100644
index 000000000000..1dd4a65cb7a6
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp45x-ixp46x.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Intel XScale Network Processors
+ * in the IXP45x and IXP46x series. This series has 64 interrupts and adds a
+ * few more peripherals over the 42x and 43x series so this extends the
+ * basic IXP4xx DTSI.
+ */
+#include "intel-ixp4xx.dtsi"
+
+/ {
+	soc {
+		bus@c4000000 {
+			compatible = "intel,ixp46x-expansion-bus-controller", "syscon";
+			/* Uses at least up to 0x124 */
+			reg = <0xc4000000 0x1000>;
+		};
+
+		rng@70002100 {
+			compatible = "intel,ixp46x-rng";
+			reg = <0x70002100 4>;
+		};
+
+		interrupt-controller@c8003000 {
+			compatible = "intel,ixp43x-interrupt";
+		};
+
+		/*
+		 * This is the USB Device Mode (UDC) controller, which is used
+		 * to present the IXP4xx as a device on a USB bus.
+		 */
+		usb@c800b000 {
+			compatible = "intel,ixp4xx-udc";
+			reg = <0xc800b000 0x1000>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c@c8011000 {
+			compatible = "intel,ixp4xx-i2c";
+			reg = <0xc8011000 0x18>;
+			interrupts = <33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		/* This is known as EthB1 */
+		ethernet@c800d000 {
+			compatible = "intel,ixp4xx-ethernet";
+			reg = <0xc800d000 0x1000>;
+			status = "disabled";
+			intel,npe = <1>;
+			/* Dummy values that depend on firmware */
+			queue-rx = <&qmgr 0>;
+			queue-txready = <&qmgr 0>;
+		};
+
+		/* This is known as EthB2 */
+		ethernet@c800e000 {
+			compatible = "intel,ixp4xx-ethernet";
+			reg = <0xc800e000 0x1000>;
+			status = "disabled";
+			intel,npe = <2>;
+			/* Dummy values that depend on firmware */
+			queue-rx = <&qmgr 0>;
+			queue-txready = <&qmgr 0>;
+		};
+
+		/* This is known as EthB3 */
+		ethernet@c800f000 {
+			compatible = "intel,ixp4xx-ethernet";
+			reg = <0xc800f000 0x1000>;
+			status = "disabled";
+			intel,npe = <3>;
+			/* Dummy values that depend on firmware */
+			queue-rx = <&qmgr 0>;
+			queue-txready = <&qmgr 0>;
+		};
+
+		ptp-timer@c8010000 {
+			compatible = "intel,ixp46x-ptp-timer";
+			reg = <0xc8010000 0x1000>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <8 IRQ_TYPE_EDGE_FALLING>, <7 IRQ_TYPE_EDGE_FALLING>;
+			interrupt-names = "master", "slave";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp46x-ixdp465.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp46x-ixdp465.dts
new file mode 100644
index 000000000000..a062cd1a6588
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp46x-ixdp465.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Intel IXDP465 Control Plane processor reference
+ * design, codename "BMP".
+ */
+
+/dts-v1/;
+
+#include "intel-ixp45x-ixp46x.dtsi"
+#include "intel-ixp4xx-reference-design.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Intel IXDP465 BMP Reference Design";
+	compatible = "intel,ixdp465", "intel,ixp46x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 32 MB of Flash mapped in at CS0 and CS1 */
+				reg = <0 0x00000000 0x2000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x1fe0000 */
+					fis-index-block = <0xff>;
+				};
+			};
+		};
+		/* TODO: configure ethernet etc */
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp4xx-reference-design.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp4xx-reference-design.dtsi
new file mode 100644
index 000000000000..31c0a69771c4
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp4xx-reference-design.dtsi
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree include file for Intel reference designs for the
+ * XScale Network Processors in the IXP 4xx series. Common device
+ * set-up for IXDP425, IXCDP1100, KIXRP435 and IXDP465.
+ */
+
+/ {
+	memory@0 {
+		/*
+		 * The board supports up to 256 MB of memory. Here we put in
+		 * 64 MB and this may be modified by the boot loader.
+		 */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eeprom@50 {
+			/*
+			 * Philips PCF8582C-2T/03 512byte I2C EEPROM
+			 * should behave like an Atmel 24c04.
+			 */
+			compatible = "atmel,24c04";
+			reg = <0x50>;
+			pagesize = <16>;
+			size = <512>;
+			read-only;
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			/* Flash memory defined per-variant */
+			nand-controller@3,0 {
+				/* Some designs have a NAND on CS3 enable it here if present */
+				status = "disabled";
+
+				/*
+				 * gen_nand needs to be extended and documented to get
+				 * command byte = 1 and address byte = 2 from the device
+				 * tree.
+				 */
+				compatible = "gen_nand";
+
+				/* Expansion bus set-up */
+				intel,ixp4xx-eb-t1 = <0>;
+				intel,ixp4xx-eb-t2 = <0>;
+				intel,ixp4xx-eb-t3 = <1>; // 1 cycle extra strobe phase
+				intel,ixp4xx-eb-t4 = <0>;
+				intel,ixp4xx-eb-t5 = <0>;
+				intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle type
+				intel,ixp4xx-eb-byte-access-on-halfword = <0>;
+				intel,ixp4xx-eb-mux-address-and-data = <0>;
+				intel,ixp4xx-eb-ahb-split-transfers = <0>;
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+
+				/* 512 bytes memory window */
+				reg = <3 0x00000000 0x200>;
+				nand-on-flash-bbt;
+				nand-ecc-mode = "soft_bch";
+				nand-ecc-step-size = <512>;
+				nand-ecc-strength = <4>;
+				nce-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* NCE */
+
+				label = "ixp400 NAND";
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					fs@0 {
+						label = "ixp400 NAND FS 0";
+						reg = <0x0 0x800000>;
+					};
+					fs@800000 {
+						label = "ixp400 NAND FS 1";
+						reg = <0x800000 0x0>;
+					};
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from IXDP425 PCI boardfile.
+			 * PCI slots on the BIXMB425BD base card.
+			 * We have up to 4 slots (IDSEL) with 4 swizzled IRQs.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+			<0x0800 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+			<0x0800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+			<0x1000 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 8 */
+			<0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 11 */
+			/* IDSEL 3 */
+			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+			<0x1800 0 0 2 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
+			<0x1800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 11 */
+			<0x1800 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 10 */
+			/* IDSEL 4 */
+			<0x2000 0 0 1 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 4 is irq 8 */
+			<0x2000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 4 is irq 11 */
+			<0x2000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 4 is irq 10 */
+			<0x2000 0 0 4 &gpio0 9  IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 4 is irq 9 */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp4xx.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp4xx.dtsi
new file mode 100644
index 000000000000..0adeccabd4fe
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp4xx.dtsi
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Intel XScale Network Processors
+ * in the IXP 4xx series.
+ */
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+		interrupt-parent = <&intcon>;
+
+		/*
+		 * The IXP4xx expansion bus is a set of up to 7 each up to 16MB
+		 * windows in the 256MB space from 0x50000000 to 0x5fffffff.
+		 */
+		bus@c4000000 {
+			/* compatible and reg filled in by per-soc device tree */
+			native-endian;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x50000000 0x01000000>,
+				 <1 0x0 0x51000000 0x01000000>,
+				 <2 0x0 0x52000000 0x01000000>,
+				 <3 0x0 0x53000000 0x01000000>,
+				 <4 0x0 0x54000000 0x01000000>,
+				 <5 0x0 0x55000000 0x01000000>,
+				 <6 0x0 0x56000000 0x01000000>,
+				 <7 0x0 0x57000000 0x01000000>;
+			dma-ranges = <0 0x0 0x50000000 0x01000000>,
+				 <1 0x0 0x51000000 0x01000000>,
+				 <2 0x0 0x52000000 0x01000000>,
+				 <3 0x0 0x53000000 0x01000000>,
+				 <4 0x0 0x54000000 0x01000000>,
+				 <5 0x0 0x55000000 0x01000000>,
+				 <6 0x0 0x56000000 0x01000000>,
+				 <7 0x0 0x57000000 0x01000000>;
+		};
+
+		qmgr: queue-manager@60000000 {
+			compatible = "intel,ixp4xx-ahb-queue-manager";
+			reg = <0x60000000 0x4000>;
+			interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pci@c0000000 {
+			/* compatible filled in by per-soc device tree */
+			reg = <0xc0000000 0x1000>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
+				     <9 IRQ_TYPE_LEVEL_HIGH>,
+				     <10 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			ranges =
+			/*
+			 * 64MB 32bit non-prefetchable memory 0x48000000-0x4bffffff
+			 * done in 4 chunks of 16MB each.
+			 */
+			<0x02000000 0 0x48000000 0x48000000 0 0x04000000>,
+			/* 64KB I/O space at 0x4c000000 */
+			<0x01000000 0 0x00000000 0x4c000000 0 0x00010000>;
+
+			/*
+			 * This needs to map to the start of physical memory so
+			 * PCI devices can see all (hopefully) memory. This is done
+			 * using 4 1:1 16MB windows, so the RAM should not be more than
+			 * 64 MB for this to work. If your memory is anywhere else
+			 * than at 0x0 you need to alter this.
+			 */
+			dma-ranges =
+			<0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+			/* Each unique DTS using PCI must specify the swizzling */
+		};
+
+		uart0: serial@c8000000 {
+			compatible = "intel,xscale-uart";
+			reg = <0xc8000000 0x1000>;
+			/*
+			 * The reg-offset and reg-shift is a side effect
+			 * of running the platform in big endian mode.
+			 */
+			reg-offset = <3>;
+			reg-shift = <2>;
+			interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <14745600>;
+			no-loopback-test;
+		};
+
+		uart1: serial@c8001000 {
+			compatible = "intel,xscale-uart";
+			reg = <0xc8001000 0x1000>;
+			/*
+			 * The reg-offset and reg-shift is a side effect
+			 * of running the platform in big endian mode.
+			 */
+			reg-offset = <3>;
+			reg-shift = <2>;
+			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <14745600>;
+			no-loopback-test;
+		};
+
+		gpio0: gpio@c8004000 {
+			compatible = "intel,ixp4xx-gpio";
+			reg = <0xc8004000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		intcon: interrupt-controller@c8003000 {
+			/*
+			 * Note: no compatible string. The subvariant of the
+			 * chip needs to define what version it is. The
+			 * location of the interrupt controller is fixed in
+			 * memory across all variants.
+			 */
+			reg = <0xc8003000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		timer@c8005000 {
+			compatible = "intel,ixp4xx-timer";
+			reg = <0xc8005000 0x100>;
+			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		npe: npe@c8006000 {
+			compatible = "intel,ixp4xx-network-processing-engine";
+			reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* NPE-A contains two high-speed serial links */
+			hss@0 {
+				compatible = "intel,ixp4xx-hss";
+				reg = <0>;
+				intel,npe-handle = <&npe 0>;
+				status = "disabled";
+			};
+
+			hss@1 {
+				compatible = "intel,ixp4xx-hss";
+				reg = <1>;
+				intel,npe-handle = <&npe 0>;
+				status = "disabled";
+			};
+
+			/* NPE-C contains a crypto accelerator */
+			crypto {
+				compatible = "intel,ixp4xx-crypto";
+				intel,npe-handle = <&npe 2>;
+				queue-rx = <&qmgr 30>;
+				queue-txready = <&qmgr 29>;
+			};
+		};
+
+		/* This is known as EthB */
+		ethernet@c8009000 {
+			compatible = "intel,ixp4xx-ethernet";
+			reg = <0xc8009000 0x1000>;
+			status = "disabled";
+			/* Dummy values that depend on firmware */
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			intel,npe-handle = <&npe 1>;
+		};
+
+		/* This is known as EthC */
+		ethernet@c800a000 {
+			compatible = "intel,ixp4xx-ethernet";
+			reg = <0xc800a000 0x1000>;
+			status = "disabled";
+			/* Dummy values that depend on firmware */
+			queue-rx = <&qmgr 0>;
+			queue-txready = <&qmgr 0>;
+			intel,npe-handle = <&npe 2>;
+		};
+
+		/* This is known as EthA */
+		ethernet@c800c000 {
+			compatible = "intel,ixp4xx-ethernet";
+			reg = <0xc800c000 0x1000>;
+			status = "disabled";
+			/* Dummy values that depend on firmware */
+			queue-rx = <&qmgr 0>;
+			queue-txready = <&qmgr 0>;
+			intel,npe-handle = <&npe 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/pxa/Makefile b/arch/arm/boot/dts/intel/pxa/Makefile
new file mode 100644
index 000000000000..24d5240f08e7
--- /dev/null
+++ b/arch/arm/boot/dts/intel/pxa/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_PXA) += \
+	pxa300-raumfeld-connector.dtb \
+	pxa300-raumfeld-controller.dtb \
+	pxa300-raumfeld-speaker-l.dtb \
+	pxa300-raumfeld-speaker-m.dtb \
+	pxa300-raumfeld-speaker-one.dtb \
+	pxa300-raumfeld-speaker-s.dtb
diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/intel/pxa/pxa25x.dtsi
index 95d59be97213..5f8300e356ad 100644
--- a/arch/arm/boot/dts/pxa25x.dtsi
+++ b/arch/arm/boot/dts/intel/pxa/pxa25x.dtsi
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright (C) 2016 Robert Jarzmik <robert.jarzmik@free.fr>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 #include "pxa2xx.dtsi"
 #include "dt-bindings/clock/pxa-clock.h"
@@ -44,9 +38,12 @@
 			compatible = "marvell,pdma-1.0";
 			reg = <0x40000000 0x10000>;
 			interrupts = <25>;
-			#dma-channels = <16>;
 			#dma-cells = <2>;
+			/* For backwards compatibility: */
+			#dma-channels = <16>;
+			dma-channels = <16>;
 			#dma-requests = <40>;
+			dma-requests = <40>;
 			status = "okay";
 		};
 
@@ -80,6 +77,10 @@
 			#pwm-cells = <1>;
 			clocks = <&clks CLK_PWM1>;
 		};
+
+		rtc@40900000 {
+			clocks = <&clks CLK_OSC32k768>;
+		};
 	};
 
 	timer@40a00000 {
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/intel/pxa/pxa27x.dtsi
index 5f1d6da02a4c..a2cbfb3be609 100644
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ b/arch/arm/boot/dts/intel/pxa/pxa27x.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /* The pxa3xx skeleton simply augments the 2xx version */
 #include "pxa2xx.dtsi"
 #include "dt-bindings/clock/pxa-clock.h"
@@ -11,9 +12,12 @@
 			compatible = "marvell,pdma-1.0";
 			reg = <0x40000000 0x10000>;
 			interrupts = <25>;
-			#dma-channels = <32>;
 			#dma-cells = <2>;
+			/* For backwards compatibility: */
+			#dma-channels = <32>;
+			dma-channels = <32>;
 			#dma-requests = <75>;
+			dma-requests = <75>;
 			status = "okay";
 		};
 
@@ -34,7 +38,7 @@
 			clocks = <&clks CLK_NONE>;
 		};
 
-		pxa27x_ohci: usb@4c000000 {
+		usb0: usb@4c000000 {
 			compatible = "marvell,pxa-ohci";
 			reg = <0x4c000000 0x10000>;
 			interrupts = <3>;
@@ -70,7 +74,7 @@
 			clocks = <&clks CLK_PWM1>;
 		};
 
-		pwri2c: i2c@40f000180 {
+		pwri2c: i2c@40f00180 {
 			compatible = "mrvl,pxa-i2c";
 			reg = <0x40f00180 0x24>;
 			interrupts = <6>;
@@ -112,6 +116,10 @@
 
 			status = "disabled";
 		};
+
+		rtc@40900000 {
+			clocks = <&clks CLK_OSC32k768>;
+		};
 	};
 
 	clocks {
diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/intel/pxa/pxa2xx.dtsi
index e4ebcde17837..84154c43fe65 100644
--- a/arch/arm/boot/dts/pxa2xx.dtsi
+++ b/arch/arm/boot/dts/intel/pxa/pxa2xx.dtsi
@@ -1,15 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * pxa2xx.dtsi - Device Tree Include file for Marvell PXA2xx family SoC
  *
  * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
- *
- * Licensed under GPLv2 or later.
  */
 
-#include "skeleton.dtsi"
 #include "dt-bindings/clock/pxa-clock.h"
 
+#define PMGROUP(pin) #pin
+#define PMMUX(func, pin, af)			\
+	mux- ## func {				\
+		groups = PMGROUP(P ## pin);	\
+		function = #af;			\
+	}
+#define PMMUX_LPM_LOW(func, pin, af)		\
+	mux- ## func {				\
+		groups = PMGROUP(P ## pin);	\
+		function = #af;			\
+		low-power-disable;		\
+	}
+#define PMMUX_LPM_HIGH(func, pin, af)		\
+	mux- ## func {				\
+		groups = PMGROUP(P ## pin);	\
+		function = #af;			\
+		low-power-enable;		\
+	}
+
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Marvell PXA2xx family SoC";
 	compatible = "marvell,pxa2xx";
 	interrupt-parent = <&pxairq>;
@@ -24,8 +43,6 @@
 	};
 
 	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
 		cpu {
 			compatible = "marvell,xscale";
 			device_type = "cpu";
@@ -76,7 +93,7 @@
 			};
 		};
 
-		ffuart: uart@40100000 {
+		ffuart: serial@40100000 {
 			compatible = "mrvl,pxa-uart";
 			reg = <0x40100000 0x30>;
 			interrupts = <22>;
@@ -84,7 +101,7 @@
 			status = "disabled";
 		};
 
-		btuart: uart@40200000 {
+		btuart: serial@40200000 {
 			compatible = "mrvl,pxa-uart";
 			reg = <0x40200000 0x30>;
 			interrupts = <21>;
@@ -92,7 +109,7 @@
 			status = "disabled";
 		};
 
-		stuart: uart@40700000 {
+		stuart: serial@40700000 {
 			compatible = "mrvl,pxa-uart";
 			reg = <0x40700000 0x30>;
 			interrupts = <20>;
@@ -100,9 +117,9 @@
 			status = "disabled";
 		};
 
-		hwuart: uart@41100000 {
+		hwuart: serial@41600000 {
 			compatible = "mrvl,pxa-uart";
-			reg = <0x41100000 0x30>;
+			reg = <0x41600000 0x30>;
 			interrupts = <7>;
 			status = "disabled";
 		};
@@ -117,13 +134,6 @@
 			status = "disabled";
 		};
 
-		usb0: ohci@4c000000 {
-			compatible = "marvell,pxa-ohci";
-			reg = <0x4c000000 0x10000>;
-			interrupts = <3>;
-			status = "disabled";
-		};
-
 		mmc0: mmc@41100000 {
 			compatible = "marvell,pxa-mmc";
 			reg = <0x41100000 0x1000>;
@@ -141,7 +151,7 @@
 			interrupts = <30 31>;
 		};
 
-		lcd-controller@40500000 {
+		lcdc: lcd-controller@40500000 {
 			compatible = "marvell,pxa2xx-lcdc";
 			reg = <0x44000000 0x10000>;
 			interrupts = <17>;
diff --git a/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-common.dtsi b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-common.dtsi
new file mode 100644
index 000000000000..147c99191dc2
--- /dev/null
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-common.dtsi
@@ -0,0 +1,405 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "pxa3xx.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* Will be overridden by bootloader */
+	hw-revision = <0>;
+
+	chosen {
+		bootargs = "root=ubi0:RootFS rootfstype=ubifs rw ubi.mtd=3";
+		stdout-path = &ffuart;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0xa0000000 0x8000000>;	/* 128 MB */
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3-fixed-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8-fixed-supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_va_5v0: regulator-va-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "va-5v0-fixed-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio 124 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	ssp_dai0: ssp-dai0 {
+		compatible = "mrvl,pxa-ssp-dai";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ssp0_dai_pins>;
+		port = <&ssp1>;
+		#sound-dai-cells = <0>;
+		dmas = <&pdma 13 3
+			&pdma 14 3>;
+		dma-names = "rx", "tx";
+		clock-names = "extclk";
+	};
+
+	ssp_dai1: ssp-dai1 {
+		compatible = "mrvl,pxa-ssp-dai";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ssp1_dai_pins>;
+		port = <&ssp2>;
+		#sound-dai-cells = <0>;
+		dmas = <&pdma 15 3
+			&pdma 16 3>;
+		dma-names = "rx", "tx";
+		clock-names = "extclk";
+	};
+
+	spi: spi {
+		compatible = "spi-gpio";
+		#address-cells = <0x1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_pins>;
+		gpio-sck = <&gpio 95 GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio 98 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio 97 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <
+			&gpio 34 GPIO_ACTIVE_HIGH
+			&gpio 125 GPIO_ACTIVE_HIGH
+			&gpio 96 GPIO_ACTIVE_HIGH
+		>;
+		num-chipselects = <3>;
+
+		dac: dac@2 {
+			compatible = "ti,dac7512";
+			reg = <2>;
+			spi-max-frequency = <1000000>;
+			vcc-supply = <&reg_3v3>;
+		};
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins>;
+
+		on-off {
+			label = "on_off button";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F6>;
+		};
+
+		rescue-boot {
+			label = "rescue boot button";
+			gpios = <&gpio 115 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_F4>;
+		};
+
+		setup {
+			label = "setup";
+			gpios = <&gpio 119 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_F3>;
+		};
+	};
+
+	rotary: rotary-encoder {
+		compatible = "rotary-encoder";
+		gpios = <
+			&gpio 19 GPIO_ACTIVE_LOW
+			&gpio 20 GPIO_ACTIVE_HIGH
+		>;
+		linux,axis = <REL_X>;
+		rotary-encoder,relative-axis;
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_a &led_pins_b>;
+
+		left {
+			label = "raumfeld:1";
+			gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+		};
+
+		right {
+			label = "raumfeld:2";
+			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-names = "default";
+		pinctrl-0 = <&poweroff_pins>;
+		gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	mmc0_pwrseq: mmc-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mmc0_pwrseq_pins>;
+		reset-gpios = <
+			&gpio 113 GPIO_ACTIVE_LOW	/* W2W_RESET	*/
+			&gpio 114 GPIO_ACTIVE_LOW	/* W2W_PDN	*/
+		>;
+	};
+
+	ethernet: ethernet@10000000 {
+		compatible = "smsc,lan9115";
+		pinctrl-names = "default";
+		pinctrl-0 = <&smsc_pins &smsc_bus_pins>;
+		reg = <0x10000000 0x100000>;
+		phy-mode = "mii";
+		interrupt-parent = <&gpio>;
+		interrupts = <40 IRQ_TYPE_EDGE_FALLING>;
+		vdd33a-supply = <&reg_3v3>;
+		vddvario-supply = <&reg_1v8>;
+		reset-gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+		smsc,irq-push-pull;
+	};
+};
+
+&ffuart {
+	status = "okay";
+};
+
+&pwri2c {
+	status = "okay";
+
+	max8660: regulator@34 {
+		compatible = "maxim,max8660";
+		reg = <0x34>;
+
+		regulators {
+			regulator-v3 {
+				regulator-compatible = "V3(DCDC)";
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			regulator-v4 {
+				regulator-compatible = "V4(DCDC)";
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			regulator-v5 {
+				regulator-compatible = "V5(LDO)";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <2000000>;
+			};
+
+			reg_vcc_sdio: regulator-v6 {
+				regulator-compatible = "V6(LDO)";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			regulator-v7 {
+				regulator-compatible = "V7(LDO)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&pxai2c1 {
+	status = "okay";
+	mrvl,i2c-fast-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pxai2c1_pins>;
+};
+
+&ssp1 {
+	status = "okay";
+};
+
+&ssp2 {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		nand-rb = <0>;
+		nand-ecc-mode = "hw";
+		marvell,nand-keep-config;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "Bootloader";
+				reg = <0x0000000 0xa0000>;
+				read-only;
+			};
+
+			partition@a0000 {
+				label = "BootloaderEnvironment";
+				reg = <0x0a0000 0x20000>;
+			};
+
+			partition@c0000 {
+				label = "BootloaderSplashScreen";
+				reg = <0x0c0000 0x60000>;
+			};
+
+			partition@120000 {
+				label = "UBI";
+				reg = <0x120000 0x7ee0000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+	marvell,enable-port1;
+	marvell,port-mode = <2>; /* PMM_GLOBAL_MODE */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pxa3xx_ohci_pins>;
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	pxa-mmc,detect-delay-ms = <200>;
+	vmmc-supply = <&reg_vcc_sdio>;
+	mmc-pwrseq = <&mmc0_pwrseq>;
+	non-removable;
+	bus-width = <4>;
+};
+
+&pinctrl {
+	poweroff_pins: poweroff-pins {
+		pinctrl-single,pins = <MFP_PIN_PXA300(16) MFP_AF0>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+	};
+
+	led_pins_a: led-pins-a {
+		pinctrl-single,pins = <MFP_PIN_PXA300(35) MFP_AF0>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	led_pins_b: led-pins-b {
+		pinctrl-single,pins = <MFP_PIN_PXA300(36) MFP_AF0>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH);
+	};
+
+	pxai2c1_pins: pxai2c1-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(21) MFP_AF1	/* I2C_SCL	*/
+			MFP_PIN_PXA300(22) MFP_AF1	/* I2C_SDA	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
+	};
+
+	gpio_keys_pins: gpio-keys-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(14) MFP_AF0	/* on-off	*/
+			MFP_PIN_PXA300(115) MFP_AF0	/* rescue boot	*/
+			MFP_PIN_PXA300(119) MFP_AF0	/* setup	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+	};
+
+	spi_pins: spi-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(95) MFP_AF0	/* SCK		*/
+			MFP_PIN_PXA300(97) MFP_AF0	/* MOSI		*/
+			MFP_PIN_PXA300(98) MFP_AF0	/* MISO		*/
+			MFP_PIN_PXA300(34) MFP_AF0	/* CS#0		*/
+			MFP_PIN_PXA300(125) MFP_AF0	/* CS#1		*/
+			MFP_PIN_PXA300(96) MFP_AF0	/* CS#2		*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	pxa3xx_ohci_pins: pxa3xx-ohci-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300_2(0) MFP_AF1	/* USBHPEN	*/
+			MFP_PIN_PXA300_2(1) MFP_AF1	/* USBHPWR	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	smsc_pins: smsc-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(39) MFP_AF0	/* RESET	*/
+			MFP_PIN_PXA300(40) MFP_AF0	/* IRQ		*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	smsc_bus_pins: smsc-bus-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(1) MFP_AF1	/* nCS2		*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+	};
+
+	mmc0_pins: mmc0-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(3) MFP_AF4	/* MMC1_DAT0	*/
+			MFP_PIN_PXA300(4) MFP_AF4	/* MMC1_DAT1	*/
+			MFP_PIN_PXA300(5) MFP_AF4	/* MMC1_DAT2	*/
+			MFP_PIN_PXA300(6) MFP_AF4	/* MMC1_DAT3	*/
+			MFP_PIN_PXA300(7) MFP_AF4	/* MMC1_CLK	*/
+			MFP_PIN_PXA300(8) MFP_AF4	/* MMC1_CMD	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH);
+	};
+
+	mmc0_pwrseq_pins: mmc0-pwrseq-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(113) MFP_AF0	/* W2W_RESET	*/
+			MFP_PIN_PXA300(114) MFP_AF0	/* W2W_PDN	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+	};
+
+	ssp0_dai_pins: ssp0-dai-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(85) MFP_AF1	/* SSP1_SCLK	*/
+			MFP_PIN_PXA300(86) MFP_AF1	/* SSP1_FRM	*/
+			MFP_PIN_PXA300(87) MFP_AF1	/* SSP1_TXD	*/
+			MFP_PIN_PXA300(88) MFP_AF1	/* SSP1_RXD	*/
+			MFP_PIN_PXA300(89) MFP_AF1	/* SSP1_EXTCLK	*/
+			MFP_PIN_PXA300(90) MFP_AF1	/* SSP1_SYSCLK	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	ssp1_dai_pins: ssp1-dai-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(25) MFP_AF2	/* SSP2_SCLK	*/
+			MFP_PIN_PXA300(26) MFP_AF2	/* SSP2_FRM	*/
+			MFP_PIN_PXA300(27) MFP_AF2	/* SSP2_TXD	*/
+			MFP_PIN_PXA300(29) MFP_AF2	/* SSP2_EXTCLK	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+};
diff --git a/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-connector.dts b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-connector.dts
new file mode 100644
index 000000000000..3e9445419e39
--- /dev/null
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-connector.dts
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+#include "pxa300-raumfeld-tuneable-clock.dtsi"
+
+/ {
+	model = "Raumfeld Connector (PXA3xx)";
+	compatible = "raumfeld,raumfeld-connector-pxa303", "marvell,pxa300";
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Raumfeld Connector";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			format = "i2s";
+			bitclock-master = <&dailink_master_analog>;
+			frame-master = <&dailink_master_analog>;
+			mclk-fs = <256>;
+
+			dailink_master_analog: cpu {
+				sound-dai = <&ssp_dai0>;
+			};
+
+			codec {
+				sound-dai = <&cs4270>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			format = "i2s";
+			bitclock-master = <&dailink_master_digital>;
+			frame-master = <&dailink_master_digital>;
+			mclk-fs = <256>;
+
+			dailink_master_digital: cpu {
+				sound-dai = <&ssp_dai1>;
+			};
+
+			codec {
+				sound-dai = <&ak4104>;
+			};
+		};
+	};
+};
+
+&ssp1 {
+	status = "okay";
+};
+
+&ssp2 {
+	status = "okay";
+};
+
+&spi {
+	ak4104: optical-transmitter@0 {
+		compatible = "asahi-kasei,ak4104";
+		reg = <0>;
+		vdd-supply = <&reg_3v3>;
+		spi-max-frequency = <5000000>;
+		reset-gpios = <&gpio 38 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&rotary {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-controller.dts b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-controller.dts
new file mode 100644
index 000000000000..12b15945ac6d
--- /dev/null
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-controller.dts
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+
+/ {
+	model = "Raumfeld Controller (PXA3xx)";
+	compatible = "raumfeld,raumfeld-controller-pxa303", "marvell,pxa300";
+
+	reg_vbatt: regulator-vbatt {
+		compatible = "regulator-fixed";
+		regulator-name = "vbatt-fixed-supply";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+	};
+
+	lcd_supply: regulator-va-tft {
+		compatible = "regulator-fixed";
+		regulator-name = "va-tft-fixed-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&w1_pins>;
+		gpios = <
+			&gpio 126 GPIO_OPEN_DRAIN	/* W1 I/O	*/
+			&gpio 105 GPIO_ACTIVE_HIGH	/* pullup	*/
+		>;
+
+		w1_ds2760: slave-ds2760 {
+			compatible = "maxim,ds2760";
+			power-supplies = <&charger>;
+		};
+	};
+
+	charger: charger {
+		pinctrl-names = "default";
+		pinctrl-0 = <&charger_pins>;
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio 101 GPIO_ACTIVE_LOW>;
+	};
+
+	/*
+	 * One of the following two will be set to "okay" by the bootloader,
+	 * depending on the hardware revision.
+	 */
+	backlight-controller-pwm {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pins>;
+		pwms = <&pwm0 10000>;
+		power-supply = <&reg_vbatt>;
+		status = "disabled";
+
+		brightness-levels = <
+			 0  1  2  3  4  5  6  7  8  9
+			10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29
+			30 31 32 33 34 35 36 37 38 39
+			40 41 42 43 44 45 46 47 48 49
+			50 51 52 53 54 55 56 57 58 59
+			60 61 62 63 64 65 66 67 68 69
+			70 71 72 73 74 75 76 77 78 79
+			80 81 82 83 84 85 86 87 88 89
+			90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <100>;
+	};
+
+	backlight-controller {
+		compatible = "lltc,lt3593";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lt3593_pins>;
+		lltc,ctrl-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		led {
+			label = "backlight";
+			default-state = "on";
+		};
+	};
+};
+
+&reg_va_5v0 {
+	status = "disabled";
+};
+
+&ethernet {
+	status = "disabled";
+};
+
+&leds {
+	status = "disabled";
+};
+
+&dac {
+	status = "disabled";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&keys {
+	pinctrl-0 = <&gpio_keys_pins &dock_detect_pins>;
+	dock-detect {
+		label = "dock detect";
+		gpios = <&gpio 116 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_F5>;
+	};
+};
+
+&spi {
+	accelerometer@1 {
+		compatible = "st,lis302dl-spi";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lis302_pins>;
+		reg = <1>;
+		spi-max-frequency = <1000000>;
+		interrupt-parent = <&gpio>;
+		interrupts = <104 IRQ_TYPE_EDGE_FALLING>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+	};
+};
+
+&lcdc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdc_pins>;
+	lcd-supply = <&lcd_supply>;
+
+	port {
+		lcdc_out: endpoint {
+			remote-endpoint = <&panel_in>;
+			bus-width = <16>;
+		};
+	};
+
+	panel {
+		compatible = "sharp,lq043t3dx0-panel";
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing {
+				clock-frequency = <9009000>;
+				pixelclk-active = <0>;	/* negative edge */
+				hactive = <480>;
+				vactive = <272>;
+				hsync-len = <41>;
+				hback-porch = <2>;
+				hfront-porch = <1>;
+				vsync-len = <10>;
+				vback-porch = <3>;
+				vfront-porch = <1>;
+			};
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lcdc_out>;
+			};
+		};
+	};
+};
+
+&gcu {
+	status = "okay";
+};
+
+&pxai2c1 {
+	touchscreen@a {
+		compatible = "eeti,exc3000-i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&eeti_ts_pins>;
+		reg = <0xa>;
+		interrupt-parent = <&gpio>;
+		interrupts = <32 IRQ_TYPE_EDGE_RISING>;
+		attn-gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
+		touchscreen-inverted-y;
+	};
+};
+
+&pinctrl {
+	lis302_pins: lis302-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(104) MFP_AF0	/* IRQ	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	eeti_ts_pins: eeti-ts-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(32) MFP_AF0	/* IRQ */
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+	};
+
+	lt3593_pins: lt3593-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(17) MFP_AF0	/* Backlight	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	pwm0_pins: pwm0-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(17) MFP_AF1	/* PWM	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	w1_pins: w1-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(126) MFP_AF0	/* PWM	*/
+			MFP_PIN_PXA300(105) MFP_AF0	/* PWM	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+	};
+
+	charger_pins: charger_pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(31) MFP_AF0	/* PEN2	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
+		pinctrl-single,bias-pullup = MPF_PULL_UP;
+	};
+
+	dock_detect_pins: dock_detect_pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(116) MFP_AF0	/* DOCK_DETECT	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
+		pinctrl-single,bias-pullup = MPF_PULL_UP;
+	};
+
+	lcdc_pins: lcdc-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(54) MFP_AF1	/* LDD_0	*/
+			MFP_PIN_PXA300(55) MFP_AF1	/* LDD_1	*/
+			MFP_PIN_PXA300(56) MFP_AF1	/* LDD_2	*/
+			MFP_PIN_PXA300(57) MFP_AF1	/* LDD_3	*/
+			MFP_PIN_PXA300(58) MFP_AF1	/* LDD_4	*/
+			MFP_PIN_PXA300(59) MFP_AF1	/* LDD_5	*/
+			MFP_PIN_PXA300(60) MFP_AF1	/* LDD_6	*/
+			MFP_PIN_PXA300(61) MFP_AF1	/* LDD_7	*/
+			MFP_PIN_PXA300(62) MFP_AF1	/* LDD_8	*/
+			MFP_PIN_PXA300(63) MFP_AF1	/* LDD_9	*/
+			MFP_PIN_PXA300(64) MFP_AF1	/* LDD_10	*/
+			MFP_PIN_PXA300(65) MFP_AF1	/* LDD_11	*/
+			MFP_PIN_PXA300(66) MFP_AF1	/* LDD_12	*/
+			MFP_PIN_PXA300(67) MFP_AF1	/* LDD_13	*/
+			MFP_PIN_PXA300(68) MFP_AF1	/* LDD_14	*/
+			MFP_PIN_PXA300(69) MFP_AF1	/* LDD_15	*/
+			MFP_PIN_PXA300(70) MFP_AF1	/* LDD_16	*/
+			MFP_PIN_PXA300(71) MFP_AF1	/* LDD_17	*/
+			MFP_PIN_PXA300(72) MFP_AF1	/* LCD_FCLK	*/
+			MFP_PIN_PXA300(73) MFP_AF1	/* LCD_LCLK	*/
+			MFP_PIN_PXA300(74) MFP_AF1	/* LCD_PCLK	*/
+			MFP_PIN_PXA300(75) MFP_AF1	/* LCD_BIAS	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+};
diff --git a/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-l.dts b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-l.dts
new file mode 100644
index 000000000000..5a0f7f17856f
--- /dev/null
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-l.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+#include "pxa300-raumfeld-tuneable-clock.dtsi"
+
+/ {
+	model = "Raumfeld Speaker L (PXA3xx)";
+	compatible = "raumfeld,raumfeld-speaker-l-pxa303", "marvell,pxa300";
+};
diff --git a/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-m.dts b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-m.dts
new file mode 100644
index 000000000000..fa10d896282c
--- /dev/null
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-m.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+#include "pxa300-raumfeld-tuneable-clock.dtsi"
+
+/ {
+	model = "Raumfeld Speaker M (PXA3xx)";
+	compatible = "raumfeld,raumfeld-speaker-m-pxa303", "marvell,pxa300";
+};
diff --git a/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-one.dts b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-one.dts
new file mode 100644
index 000000000000..a70560a8ea92
--- /dev/null
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-one.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+
+/ {
+	model = "Raumfeld Speaker One (PXA3xx)";
+	compatible = "raumfeld,raumfeld-speaker-one-pxa303", "marvell,pxa300";
+
+	wm8782: wm8782 {
+		compatible = "wm8782";
+		#sound-dai-cells = <0>;
+		Vdd-supply = <&reg_3v3>;
+		Vdda-supply = <&reg_va_5v0>;
+	};
+
+	xo_11mhz: oscillator-11mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+		clock-accuracy = <100>;
+	};
+
+	xo_audio: clock-gate {
+		compatible = "gpio-gate-clock";
+		pinctrlnames = "default";
+		pinctrl-0 = <&xo_audio_pins>;
+		clocks = <&xo_11mhz>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio 111 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_va_30v0: regulator-va-30v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "va-30v0-fixed-supply";
+		regulator-min-microvolt = <30000000>;
+		regulator-max-microvolt = <30000000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Raumfeld Speaker";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			format = "i2s";
+			bitclock-master = <&dailink_master_analog_out>;
+			frame-master = <&dailink_master_analog_out>;
+			mclk-fs = <256>;
+
+			dailink_master_analog_out: cpu {
+				sound-dai = <&ssp_dai0>;
+			};
+
+			codec {
+				sound-dai = <&sta320>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			format = "i2s";
+			bitclock-master = <&dailink_master_analog_in>;
+			frame-master = <&dailink_master_analog_in>;
+			mclk-fs = <256>;
+
+			dailink_master_analog_in: cpu {
+				sound-dai = <&ssp_dai0>;
+			};
+
+			codec {
+				sound-dai = <&wm8782>;
+			};
+		};
+	};
+};
+
+&ssp_dai0 {
+	clocks = <&xo_audio>;
+};
+
+&spi {
+	dac@2 {
+		compatible = "ti,dac7512";
+		reg = <2>;
+		spi-max-frequency = <1000000>;
+		vcc-supply = <&reg_3v3>;
+	};
+};
+
+&rotary {
+	status = "okay";
+};
+
+&pxai2c1 {
+	sta320: codec@1a {
+		compatible = "st,sta32x";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sta320_pins>;
+		clocks = <&xo_audio>;
+		clock-names = "xti";
+		reset-gpios = <&gpio 120 GPIO_ACTIVE_HIGH>;
+		Vdda-supply = <&reg_3v3>;
+		Vdd3-supply = <&reg_3v3>;
+		Vcc-supply = <&reg_va_30v0>;
+		#sound-dai-cells = <0>;
+		st,thermal-warning-adjustment;
+		st,thermal-warning-recovery;
+		st,fault-detect-recovery;
+		st,drop-compensation-ns = <80>;
+		st,max-power-use-mpcc;
+		st,invalid-input-detect-mute;
+		/* 2 (half-bridge) and 1 (full-bridge) on-board power */
+		st,output-conf = /bits/ 8 <0x1>;
+		st,ch1-output-mapping = /bits/ 8 <0>;
+		st,ch2-output-mapping = /bits/ 8 <1>;
+		st,ch3-output-mapping = /bits/ 8 <2>;
+		st,needs_esd_watchdog;
+	};
+};
+
+&pinctrl {
+	xo_audio_pins: xo-audio-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(111) MFP_AF0	/* ENABLE */
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	sta320_pins: sta320-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(120) MFP_AF0	/* CODEC_RESET	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+	};
+};
diff --git a/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-s.dts b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-s.dts
new file mode 100644
index 000000000000..36e20cbf8704
--- /dev/null
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-s.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+#include "pxa300-raumfeld-tuneable-clock.dtsi"
+
+/ {
+	model = "Raumfeld Speaker S (PXA3xx)";
+	compatible = "raumfeld,raumfeld-speaker-s-pxa303", "marvell,pxa300";
+};
diff --git a/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-tuneable-clock.dtsi b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-tuneable-clock.dtsi
new file mode 100644
index 000000000000..561483b93989
--- /dev/null
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-tuneable-clock.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/clock/maxim,max9485.h>
+
+/ {
+	xo_27mhz: oscillator-27mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+		clock-accuracy = <100>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Raumfeld Speaker";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			format = "i2s";
+			bitclock-master = <&dailink_master_analog>;
+			frame-master = <&dailink_master_analog>;
+			mclk-fs = <256>;
+
+			dailink_master_analog: cpu {
+				sound-dai = <&ssp_dai0>;
+			};
+
+			codec {
+				sound-dai = <&cs4270>;
+			};
+		};
+	};
+};
+
+&ssp_dai0 {
+	clocks = <&max9485 MAX9485_CLKOUT1>;
+};
+
+&ssp_dai1 {
+	clocks = <&max9485 MAX9485_CLKOUT1>;
+};
+
+&pxai2c1 {
+	cs4270: codec@48 {
+		compatible = "cirrus,cs4270";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cs4270_pins>;
+		reg = <0x48>;
+		va-supply = <&reg_va_5v0>;
+		vd-supply = <&reg_3v3>;
+		vlc-supply = <&reg_3v3>;
+		reset-gpios = <&gpio 120 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+
+	max9485: clock-generator@63 {
+		compatible = "maxim,max9485";
+		pinctrl-names = "default";
+		pinctrl-0 = <&max9485_pins>;
+		reg = <0x63>;
+		vdd-supply = <&reg_3v3>;
+		clock-names = "xclk";
+		clocks = <&xo_27mhz>;
+		reset-gpios = <&gpio 111 GPIO_ACTIVE_HIGH>;
+		#clock-cells = <1>;
+	};
+};
+
+&pinctrl {
+	cs4270_pins: cs4270-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(120) MFP_AF0	/* RESET */
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	max9485_pins: max9485-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(111) MFP_AF0	/* RESET */
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+};
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/intel/pxa/pxa3xx.dtsi
index 7a0cc4ea819a..f9c216f91865 100644
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ b/arch/arm/boot/dts/intel/pxa/pxa3xx.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /* The pxa3xx skeleton simply augments the 2xx version */
 #include "pxa2xx.dtsi"
 
@@ -7,6 +8,10 @@
 	 (gpio <= 98) ? (0x0400 + 4 * (gpio - 27)) :	\
 	 (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) :	\
 	 0)
+#define MFP_PIN_PXA300_2(gpio)				\
+	((gpio <= 1) ? (0x674 + 4 * gpio) :		\
+	 (gpio <= 6) ? (0x2dc + 4 * gpio) :		\
+	 0)
 
 #define MFP_PIN_PXA310(gpio)				\
 	((gpio <= 2) ? (0x00b4 + 4 * gpio) :		\
@@ -17,6 +22,11 @@
 	 (gpio <= 262) ? 0 :				\
 	 (gpio <= 268) ? (0x052c + 4 * (gpio - 263)) :	\
 	 0)
+#define MFP_PIN_PXA310_2(gpio)				\
+	((gpio <= 1) ? (0x674 + 4 * gpio) :		\
+	 (gpio <= 6) ? (0x2dc + 4 * gpio) :		\
+	 (gpio <= 10) ? (0x52c + 4 * gpio) :		\
+	 0)
 
 #define MFP_PIN_PXA320(gpio)				\
 	((gpio <= 4) ? (0x0124 + 4 * gpio) :		\
@@ -29,6 +39,10 @@
 	 (gpio <= 98) ? (0x04f0 + 4 * (gpio - 74)) :	\
 	 (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) :	\
 	 0)
+#define MFP_PIN_PXA320_2(gpio)				\
+	((gpio <= 3) ? (0x674 + 4 * gpio) :		\
+	 (gpio <= 5) ? (0x284 + 4 * gpio) :		\
+	 0)
 
 /*
  * MFP Alternate functions for pins having a gpio.
@@ -57,6 +71,14 @@
 #define MFP_DS13X	< (0x7 << 10) MFP_DSMSK >
 
 /*
+ * MFP bias pull mode for pins.
+ * Example of use: pinctrl-single,bias-pullup = MPF_PULL_UP;
+ */
+#define MPF_PULL_MSK	(0x7 << 13)
+#define MPF_PULL_DOWN	< (0x5 << 13) (0x5 << 13) 0 MPF_PULL_MSK >
+#define MPF_PULL_UP	< (0x6 << 13) (0x6 << 13) 0 MPF_PULL_MSK >
+
+/*
  * MFP low power mode for pins.
  * Example of use:
  *   pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW|MFP_LPM_EDGE_FALL);
@@ -100,9 +122,12 @@
 			compatible = "marvell,pdma-1.0";
 			reg = <0x40000000 0x10000>;
 			interrupts = <25>;
-			#dma-channels = <32>;
 			#dma-cells = <2>;
+			/* For backwards compatibility: */
+			#dma-channels = <32>;
+			dma-channels = <32>;
 			#dma-requests = <100>;
+			dma-requests = <100>;
 			status = "okay";
 		};
 
@@ -116,15 +141,16 @@
 			status = "disabled";
 		};
 
-		nand0: nand@43100000 {
-			compatible = "marvell,pxa3xx-nand";
+		nand_controller: nand-controller@43100000 {
+			compatible = "marvell,pxa3xx-nand-controller";
 			reg = <0x43100000 90>;
 			interrupts = <45>;
 			clocks = <&clks CLK_NAND>;
+			clock-names = "core";
 			dmas = <&pdma 97 3>;
 			dma-names = "data";
 			#address-cells = <1>;
-			#size-cells = <1>;	
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -136,8 +162,6 @@
 		pinctrl: pinctrl@40e10000 {
 			compatible = "pinconf-single";
 			reg = <0x40e10000 0xffff>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			#pinctrl-cells = <1>;
 			pinctrl-single,register-width = <32>;
 			pinctrl-single,function-mask = <0x7>;
@@ -147,8 +171,9 @@
 			compatible = "intel,pxa3xx-gpio";
 			reg = <0x40e00000 0x10000>;
 			clocks = <&clks CLK_GPIO>;
+			gpio-ranges = <&pinctrl 0 0 128>;
 			interrupt-names = "gpio0", "gpio1", "gpio_mux";
-			interrupts = <8 9 10>;
+			interrupts = <8>, <9>, <10>;
 			gpio-controller;
 			#gpio-cells = <0x2>;
 			interrupt-controller;
@@ -159,7 +184,7 @@
 			compatible = "marvell,pxa-mmc";
 			reg = <0x41100000 0x1000>;
 			interrupts = <23>;
-			clocks = <&clks CLK_MMC>;
+			clocks = <&clks CLK_MMC1>;
 			dmas = <&pdma 21 3
 				&pdma 22 3>;
 			dma-names = "rx", "tx";
@@ -170,7 +195,7 @@
 			compatible = "marvell,pxa-mmc";
 			reg = <0x42000000 0x1000>;
 			interrupts = <41>;
-			clocks = <&clks CLK_MMC1>;
+			clocks = <&clks CLK_MMC2>;
 			dmas = <&pdma 93 3
 				&pdma 94 3>;
 			dma-names = "rx", "tx";
@@ -181,14 +206,14 @@
 			compatible = "marvell,pxa-mmc";
 			reg = <0x42500000 0x1000>;
 			interrupts = <55>;
-			clocks = <&clks CLK_MMC2>;
+			clocks = <&clks CLK_MMC3>;
 			dmas = <&pdma 46 3
 				&pdma 47 3>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
-		pxa3xx_ohci: usb@4c000000 {
+		usb0: usb@4c000000 {
 			compatible = "marvell,pxa-ohci";
 			reg = <0x4c000000 0x10000>;
 			interrupts = <3>;
@@ -227,6 +252,54 @@
 			clocks = <&clks CLK_PWM1>;
 			status = "disabled";
 		};
+
+		ssp1: ssp@41000000 {
+			compatible = "mrvl,pxa3xx-ssp";
+			reg = <0x41000000 0x40>;
+			interrupts = <24>;
+			clocks = <&clks CLK_SSP1>;
+			status = "disabled";
+		};
+
+		ssp2: ssp@41700000 {
+			compatible = "mrvl,pxa3xx-ssp";
+			reg = <0x41700000 0x40>;
+			interrupts = <16>;
+			clocks = <&clks CLK_SSP2>;
+			status = "disabled";
+		};
+
+		ssp3: ssp@41900000 {
+			compatible = "mrvl,pxa3xx-ssp";
+			reg = <0x41900000 0x40>;
+			interrupts = <0>;
+			clocks = <&clks CLK_SSP3>;
+			status = "disabled";
+		};
+
+		ssp4: ssp@41a00000 {
+			compatible = "mrvl,pxa3xx-ssp";
+			reg = <0x41a00000 0x40>;
+			interrupts = <13>;
+			clocks = <&clks CLK_SSP4>;
+			status = "disabled";
+		};
+
+		timer@40a00000 {
+			compatible = "marvell,pxa-timer";
+			reg = <0x40a00000 0x20>;
+			interrupts = <26>;
+			clocks = <&clks CLK_OSTIMER>;
+			status = "okay";
+		};
+
+		gcu: display-controller@54000000 {
+			compatible = "marvell,pxa300-gcu";
+			reg = <0x54000000 0x1000>;
+			interrupts = <39>;
+			clocks = <&clks CLK_PXA300_GCU>;
+			status = "disabled";
+		};
 	};
 
 	clocks {
@@ -238,18 +311,10 @@
 		#size-cells = <1>;
 		ranges;
 
-		clks: pxa3xx_clks@41300004 {
+		clks: clocks {
 			compatible = "marvell,pxa300-clocks";
 			#clock-cells = <1>;
 			status = "okay";
 		};
 	};
-
-	timer@40a00000 {
-		compatible = "marvell,pxa-timer";
-		reg = <0x40a00000 0x20>;
-		interrupts = <26>;
-		clocks = <&clks CLK_OSTIMER>;
-		status = "okay";
-	};
 };
diff --git a/arch/arm/boot/dts/intel/socfpga/Makefile b/arch/arm/boot/dts/intel/socfpga/Makefile
new file mode 100644
index 000000000000..8df0976da01c
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/Makefile
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
+	socfpga_arria5_socdk.dtb \
+	socfpga_arria10_chameleonv3.dtb \
+	socfpga_arria10_mercury_aa1_pe1_emmc.dtb \
+	socfpga_arria10_mercury_aa1_pe1_qspi.dtb \
+	socfpga_arria10_mercury_aa1_pe1_sdmmc.dtb \
+	socfpga_arria10_mercury_aa1_pe3_emmc.dtb \
+	socfpga_arria10_mercury_aa1_pe3_qspi.dtb \
+	socfpga_arria10_mercury_aa1_pe3_sdmmc.dtb \
+	socfpga_arria10_mercury_aa1_st1_emmc.dtb \
+	socfpga_arria10_mercury_aa1_st1_qspi.dtb \
+	socfpga_arria10_mercury_aa1_st1_sdmmc.dtb \
+	socfpga_cyclone5_mercury_sa1_pe1_emmc.dtb \
+	socfpga_cyclone5_mercury_sa1_pe1_qspi.dtb \
+	socfpga_cyclone5_mercury_sa1_pe1_sdmmc.dtb \
+	socfpga_cyclone5_mercury_sa1_pe3_emmc.dtb \
+	socfpga_cyclone5_mercury_sa1_pe3_qspi.dtb \
+	socfpga_cyclone5_mercury_sa1_pe3_sdmmc.dtb \
+	socfpga_cyclone5_mercury_sa1_st1_emmc.dtb \
+	socfpga_cyclone5_mercury_sa1_st1_qspi.dtb \
+	socfpga_cyclone5_mercury_sa1_st1_sdmmc.dtb \
+	socfpga_cyclone5_mercury_sa2_pe1_qspi.dtb \
+	socfpga_cyclone5_mercury_sa2_pe1_sdmmc.dtb \
+	socfpga_cyclone5_mercury_sa2_pe3_qspi.dtb \
+	socfpga_cyclone5_mercury_sa2_pe3_sdmmc.dtb \
+	socfpga_cyclone5_mercury_sa2_st1_qspi.dtb \
+	socfpga_cyclone5_mercury_sa2_st1_sdmmc.dtb \
+	socfpga_arria10_socdk_nand.dtb \
+	socfpga_arria10_socdk_qspi.dtb \
+	socfpga_arria10_socdk_sdmmc.dtb \
+	socfpga_cyclone5_chameleon96.dtb \
+	socfpga_cyclone5_mcvevk.dtb \
+	socfpga_cyclone5_socdk.dtb \
+	socfpga_cyclone5_de0_nano_soc.dtb \
+	socfpga_cyclone5_de10nano.dtb \
+	socfpga_cyclone5_sockit.dtb \
+	socfpga_cyclone5_socrates.dtb \
+	socfpga_cyclone5_sodia.dtb \
+	socfpga_cyclone5_vining_fpga.dtb \
+	socfpga_vt.dtb
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi
index 7e24dc8e82d4..35be14150f41 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi
@@ -1,18 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
- *  Copyright (C) 2012 Altera <www.altera.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * Copyright (C) 2012 Altera <www.altera.com>
  */
 
 #include <dt-bindings/reset/altr,rst-mgr.h>
@@ -22,8 +10,6 @@
 	#size-cells = <1>;
 
 	aliases {
-		ethernet0 = &gmac0;
-		ethernet1 = &gmac1;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		timer0 = &timer0;
@@ -60,7 +46,7 @@
 		      <0xff113000 0x1000>;
 	};
 
-	intc: intc@fffed000 {
+	intc: interrupt-controller@fffed000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
@@ -94,10 +80,10 @@
 					     <0 110 4>,
 					     <0 111 4>;
 				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
 				clocks = <&l4_main_clk>;
 				clock-names = "apb_pclk";
+				resets = <&rst DMA_RESET>;
+				reset-names = "dma";
 			};
 		};
 
@@ -114,6 +100,7 @@
 			reg = <0xffc00000 0x1000>;
 			interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>;
 			clocks = <&can0_clk>;
+			resets = <&rst CAN0_RESET>;
 			status = "disabled";
 		};
 
@@ -122,6 +109,7 @@
 			reg = <0xffc01000 0x1000>;
 			interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>;
 			clocks = <&can1_clk>;
+			resets = <&rst CAN1_RESET>;
 			status = "disabled";
 		};
 
@@ -465,7 +453,6 @@
 						compatible = "altr,socfpga-gate-clk";
 						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
 						clk-gate = <0xa0 8>;
-						clk-phase = <0 135>;
 					};
 
 					sdmmc_clk_divided: sdmmc_clk_divided {
@@ -483,10 +470,17 @@
 						clk-gate = <0xa0 9>;
 					};
 
+					nand_ecc_clk: nand_ecc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&nand_x_clk>;
+						clk-gate = <0xa0 9>;
+					};
+
 					nand_clk: nand_clk {
 						#clock-cells = <0>;
 						compatible = "altr,socfpga-gate-clk";
-						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+						clocks = <&nand_x_clk>;
 						clk-gate = <0xa0 10>;
 						fixed-divider = <4>;
 					};
@@ -534,6 +528,7 @@
 			reg = <0xff400000 0x100000>;
 			resets = <&rst LWHPS2FPGA_RESET>;
 			clocks = <&l4_main_clk>;
+			status = "disabled";
 		};
 
 		fpga_bridge1: fpga_bridge@ff500000 {
@@ -541,6 +536,21 @@
 			reg = <0xff500000 0x10000>;
 			resets = <&rst HPS2FPGA_RESET>;
 			clocks = <&l4_main_clk>;
+			status = "disabled";
+		};
+
+		fpga_bridge2: fpga-bridge@ff600000 {
+			compatible = "altr,socfpga-fpga2hps-bridge";
+			reg = <0xff600000 0x100000>;
+			resets = <&rst FPGA2HPS_RESET>;
+			clocks = <&l4_main_clk>;
+			status = "disabled";
+		};
+
+		fpga_bridge3: fpga-bridge@ffc25080 {
+			compatible = "altr,socfpga-fpga2sdram-bridge";
+			reg = <0xffc25080 0x4>;
+			status = "disabled";
 		};
 
 		fpgamgr0: fpgamgr@ff706000 {
@@ -550,6 +560,12 @@
 			interrupts = <0 175 4>;
 		};
 
+		socfpga_axi_setup: stmmac-axi-config {
+			snps,wr_osr_lmt = <0xf>;
+			snps,rd_osr_lmt = <0xf>;
+			snps,blen = <0 0 0 0 16 0 0>;
+		};
+
 		gmac0: ethernet@ff700000 {
 			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
 			altr,sysmgr-syscon = <&sysmgr 0x60 0>;
@@ -565,6 +581,7 @@
 			snps,perfect-filter-entries = <128>;
 			tx-fifo-depth = <4096>;
 			rx-fifo-depth = <4096>;
+			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
 
@@ -583,6 +600,7 @@
 			snps,perfect-filter-entries = <128>;
 			tx-fifo-depth = <4096>;
 			rx-fifo-depth = <4096>;
+			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
 
@@ -592,6 +610,7 @@
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff708000 0x1000>;
 			clocks = <&l4_mp_clk>;
+			resets = <&rst GPIO0_RESET>;
 			status = "disabled";
 
 			porta: gpio-controller@0 {
@@ -612,6 +631,7 @@
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff709000 0x1000>;
 			clocks = <&l4_mp_clk>;
+			resets = <&rst GPIO1_RESET>;
 			status = "disabled";
 
 			portb: gpio-controller@0 {
@@ -632,6 +652,7 @@
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff70a000 0x1000>;
 			clocks = <&l4_mp_clk>;
+			resets = <&rst GPIO2_RESET>;
 			status = "disabled";
 
 			portc: gpio-controller@0 {
@@ -651,6 +672,7 @@
 			#size-cells = <0>;
 			compatible = "snps,designware-i2c";
 			reg = <0xffc04000 0x1000>;
+			resets = <&rst I2C0_RESET>;
 			clocks = <&l4_sp_clk>;
 			interrupts = <0 158 0x4>;
 			status = "disabled";
@@ -661,6 +683,7 @@
 			#size-cells = <0>;
 			compatible = "snps,designware-i2c";
 			reg = <0xffc05000 0x1000>;
+			resets = <&rst I2C1_RESET>;
 			clocks = <&l4_sp_clk>;
 			interrupts = <0 159 0x4>;
 			status = "disabled";
@@ -671,6 +694,7 @@
 			#size-cells = <0>;
 			compatible = "snps,designware-i2c";
 			reg = <0xffc06000 0x1000>;
+			resets = <&rst I2C2_RESET>;
 			clocks = <&l4_sp_clk>;
 			interrupts = <0 160 0x4>;
 			status = "disabled";
@@ -681,6 +705,7 @@
 			#size-cells = <0>;
 			compatible = "snps,designware-i2c";
 			reg = <0xffc07000 0x1000>;
+			resets = <&rst I2C3_RESET>;
 			clocks = <&l4_sp_clk>;
 			interrupts = <0 161 0x4>;
 			status = "disabled";
@@ -706,7 +731,7 @@
 			};
 		};
 
-		L2: l2-cache@fffef000 {
+		L2: cache-controller@fffef000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xfffef000 0x1000>;
 			interrupts = <0 38 0x04>;
@@ -724,12 +749,12 @@
 			arm,prefetch-offset = <7>;
 		};
 
-		l3regs@0xff800000 {
+		l3regs@ff800000 {
 			compatible = "altr,l3regs", "syscon";
 			reg = <0xff800000 0x1000>;
 		};
 
-		mmc: dwmmc0@ff704000 {
+		mmc: mmc@ff704000 {
 			compatible = "altr,socfpga-dw-mshc";
 			reg = <0xff704000 0x1000>;
 			interrupts = <0 139 4>;
@@ -738,19 +763,22 @@
 			#size-cells = <0>;
 			clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
 			clock-names = "biu", "ciu";
+			resets = <&rst SDMMC_RESET>;
+			altr,sysmgr-syscon = <&sysmgr 0x108 3>;
 			status = "disabled";
 		};
 
-		nand0: nand@ff900000 {
+		nand0: nand-controller@ff900000 {
 			#address-cells = <0x1>;
-			#size-cells = <0x1>;
-			compatible = "denali,denali-nand-dt";
+			#size-cells = <0x0>;
+			compatible = "altr,socfpga-denali-nand";
 			reg = <0xff900000 0x100000>,
 			      <0xffb80000 0x10000>;
 			reg-names = "nand_data", "denali_reg";
 			interrupts = <0x0 0x90 0x4>;
-			dma-mask = <0xffffffff>;
-			clocks = <&nand_clk>;
+			clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
+			clock-names = "nand", "nand_x", "ecc";
+			resets = <&rst NAND_RESET>;
 			status = "disabled";
 		};
 
@@ -760,8 +788,8 @@
 		};
 
 		qspi: spi@ff705000 {
-			compatible = "cdns,qspi-nor";
-                        #address-cells = <1>;
+			compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
+			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xff705000 0x1000>,
 			      <0xffa00000 0x1000>;
@@ -770,6 +798,7 @@
 			cdns,fifo-width = <4>;
 			cdns,trigger-address = <0x00000000>;
 			clocks = <&qspi_clk>;
+			resets = <&rst QSPI_RESET>;
 			status = "disabled";
 		};
 
@@ -788,6 +817,7 @@
 		sdr: sdr@ffc25000 {
 			compatible = "altr,sdr-ctl", "syscon";
 			reg = <0xffc25000 0x1000>;
+			resets = <&rst SDR_RESET>;
 		};
 
 		sdramedac {
@@ -804,6 +834,8 @@
 			interrupts = <0 154 4>;
 			num-cs = <4>;
 			clocks = <&spi_m_clk>;
+			resets = <&rst SPIM0_RESET>;
+			reset-names = "spi";
 			status = "disabled";
 		};
 
@@ -815,6 +847,8 @@
 			interrupts = <0 155 4>;
 			num-cs = <4>;
 			clocks = <&spi_m_clk>;
+			resets = <&rst SPIM1_RESET>;
+			reset-names = "spi";
 			status = "disabled";
 		};
 
@@ -827,7 +861,7 @@
 		timer@fffec600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xfffec600 0x100>;
-			interrupts = <1 13 0xf04>;
+			interrupts = <1 13 0xf01>;
 			clocks = <&mpu_periph_clk>;
 		};
 
@@ -837,6 +871,8 @@
 			reg = <0xffc08000 0x1000>;
 			clocks = <&l4_sp_clk>;
 			clock-names = "timer";
+			resets = <&rst SPTIMER0_RESET>;
+			reset-names = "timer";
 		};
 
 		timer1: timer1@ffc09000 {
@@ -845,6 +881,8 @@
 			reg = <0xffc09000 0x1000>;
 			clocks = <&l4_sp_clk>;
 			clock-names = "timer";
+			resets = <&rst SPTIMER1_RESET>;
+			reset-names = "timer";
 		};
 
 		timer2: timer2@ffd00000 {
@@ -853,6 +891,8 @@
 			reg = <0xffd00000 0x1000>;
 			clocks = <&osc1>;
 			clock-names = "timer";
+			resets = <&rst OSC1TIMER0_RESET>;
+			reset-names = "timer";
 		};
 
 		timer3: timer3@ffd01000 {
@@ -861,9 +901,11 @@
 			reg = <0xffd01000 0x1000>;
 			clocks = <&osc1>;
 			clock-names = "timer";
+			resets = <&rst OSC1TIMER1_RESET>;
+			reset-names = "timer";
 		};
 
-		uart0: serial0@ffc02000 {
+		uart0: serial@ffc02000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc02000 0x1000>;
 			interrupts = <0 162 4>;
@@ -873,9 +915,10 @@
 			dmas = <&pdma 28>,
 			       <&pdma 29>;
 			dma-names = "tx", "rx";
+			resets = <&rst UART0_RESET>;
 		};
 
-		uart1: serial1@ffc03000 {
+		uart1: serial@ffc03000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc03000 0x1000>;
 			interrupts = <0 163 4>;
@@ -885,6 +928,7 @@
 			dmas = <&pdma 30>,
 			       <&pdma 31>;
 			dma-names = "tx", "rx";
+			resets = <&rst UART1_RESET>;
 		};
 
 		usbphy0: usbphy {
@@ -924,6 +968,7 @@
 			reg = <0xffd02000 0x1000>;
 			interrupts = <0 171 4>;
 			clocks = <&osc1>;
+			resets = <&rst L4WD0_RESET>;
 			status = "disabled";
 		};
 
@@ -932,6 +977,7 @@
 			reg = <0xffd03000 0x1000>;
 			interrupts = <0 172 4>;
 			clocks = <&osc1>;
+			resets = <&rst L4WD1_RESET>;
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
index bead79e4b2aa..b108265e9bde 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
@@ -1,17 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright Altera Corporation (C) 2014. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -26,13 +15,13 @@
 		#size-cells = <0>;
 		enable-method = "altr,socfpga-a10-smp";
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <0>;
 			next-level-cache = <&L2>;
 		};
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <1>;
@@ -40,7 +29,16 @@
 		};
 	};
 
-	intc: intc@ffffd000 {
+	pmu: pmu@ff111000 {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&intc>;
+		interrupts = <0 124 4>, <0 125 4>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+		reg = <0xff111000 0x1000>,
+		      <0xff113000 0x1000>;
+	};
+
+	intc: interrupt-controller@ffffd000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
@@ -75,10 +73,10 @@
 					     <0 90 IRQ_TYPE_LEVEL_HIGH>,
 					     <0 91 IRQ_TYPE_LEVEL_HIGH>;
 				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
 				clocks = <&l4_main_clk>;
 				clock-names = "apb_pclk";
+				resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>;
+				reset-names = "dma", "dma-ocp";
 			};
 		};
 
@@ -367,7 +365,6 @@
 						compatible = "altr,socfpga-a10-gate-clk";
 						clocks = <&sdmmc_free_clk>;
 						clk-gate = <0xC8 5>;
-						clk-phase = <0 135>;
 					};
 
 					qspi_clk: qspi_clk {
@@ -377,13 +374,28 @@
 						clk-gate = <0xC8 11>;
 					};
 
-					nand_clk: nand_clk {
+					nand_x_clk: nand_x_clk {
 						#clock-cells = <0>;
 						compatible = "altr,socfpga-a10-gate-clk";
 						clocks = <&l4_mp_clk>;
 						clk-gate = <0xC8 10>;
 					};
 
+					nand_ecc_clk: nand_ecc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&nand_x_clk>;
+						clk-gate = <0xC8 10>;
+					};
+
+					nand_clk: nand_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&nand_x_clk>;
+						fixed-divider = <4>;
+						clk-gate = <0xC8 10>;
+					};
+
 					spi_m_clk: spi_m_clk {
 						#clock-cells = <0>;
 						compatible = "altr,socfpga-a10-gate-clk";
@@ -414,7 +426,7 @@
 		};
 
 		gmac0: ethernet@ff800000 {
-			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
 			altr,sysmgr-syscon = <&sysmgr 0x44 0>;
 			reg = <0xff800000 0x2000>;
 			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -425,17 +437,17 @@
 			snps,perfect-filter-entries = <128>;
 			tx-fifo-depth = <4096>;
 			rx-fifo-depth = <16384>;
-			clocks = <&l4_mp_clk>;
-			clock-names = "stmmaceth";
-			resets = <&rst EMAC0_RESET>;
-			reset-names = "stmmaceth";
+			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
+			clock-names = "stmmaceth", "ptp_ref";
+			resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
+			reset-names = "stmmaceth", "stmmaceth-ocp";
 			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
 
 		gmac1: ethernet@ff802000 {
-			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
-			altr,sysmgr-syscon = <&sysmgr 0x48 0>;
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x48 8>;
 		        reg = <0xff802000 0x2000>;
 			interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
@@ -445,17 +457,17 @@
 			snps,perfect-filter-entries = <128>;
 			tx-fifo-depth = <4096>;
 			rx-fifo-depth = <16384>;
-			clocks = <&l4_mp_clk>;
-			clock-names = "stmmaceth";
-			resets = <&rst EMAC1_RESET>;
-			reset-names = "stmmaceth";
+			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
+			clock-names = "stmmaceth", "ptp_ref";
+			resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
+			reset-names = "stmmaceth", "stmmaceth-ocp";
 			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
 
 		gmac2: ethernet@ff804000 {
-			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
-			altr,sysmgr-syscon = <&sysmgr 0x4C 0>;
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x4C 16>;
 			reg = <0xff804000 0x2000>;
 			interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
@@ -465,8 +477,10 @@
 			snps,perfect-filter-entries = <128>;
 			tx-fifo-depth = <4096>;
 			rx-fifo-depth = <16384>;
-			clocks = <&l4_mp_clk>;
-			clock-names = "stmmaceth";
+			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
+			clock-names = "stmmaceth", "ptp_ref";
+			resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
+			reset-names = "stmmaceth", "stmmaceth-ocp";
 			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
@@ -476,6 +490,7 @@
 			#size-cells = <0>;
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xffc02900 0x100>;
+			resets = <&rst GPIO0_RESET>;
 			status = "disabled";
 
 			porta: gpio-controller@0 {
@@ -495,6 +510,7 @@
 			#size-cells = <0>;
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xffc02a00 0x100>;
+			resets = <&rst GPIO1_RESET>;
 			status = "disabled";
 
 			portb: gpio-controller@0 {
@@ -514,6 +530,7 @@
 			#size-cells = <0>;
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xffc02b00 0x100>;
+			resets = <&rst GPIO2_RESET>;
 			status = "disabled";
 
 			portc: gpio-controller@0 {
@@ -544,6 +561,7 @@
 			reg = <0xffc02200 0x100>;
 			interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&l4_sp_clk>;
+			resets = <&rst I2C0_RESET>;
 			status = "disabled";
 		};
 
@@ -554,6 +572,7 @@
 			reg = <0xffc02300 0x100>;
 			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&l4_sp_clk>;
+			resets = <&rst I2C1_RESET>;
 			status = "disabled";
 		};
 
@@ -564,6 +583,7 @@
 			reg = <0xffc02400 0x100>;
 			interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&l4_sp_clk>;
+			resets = <&rst I2C2_RESET>;
 			status = "disabled";
 		};
 
@@ -574,6 +594,7 @@
 			reg = <0xffc02500 0x100>;
 			interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&l4_sp_clk>;
+			resets = <&rst I2C3_RESET>;
 			status = "disabled";
 		};
 
@@ -584,6 +605,21 @@
 			reg = <0xffc02600 0x100>;
 			interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&l4_sp_clk>;
+			resets = <&rst I2C4_RESET>;
+			status = "disabled";
+		};
+
+		spi0: spi@ffda4000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda4000 0x100>;
+			interrupts = <0 101 4>;
+			num-cs = <4>;
+			/*32bit_access;*/
+			clocks = <&spi_m_clk>;
+			resets = <&rst SPIM0_RESET>;
+			reset-names = "spi";
 			status = "disabled";
 		};
 
@@ -593,21 +629,22 @@
 			#size-cells = <0>;
 			reg = <0xffda5000 0x100>;
 			interrupts = <0 102 4>;
-			num-chipselect = <4>;
-			bus-num = <0>;
+			num-cs = <4>;
 			/*32bit_access;*/
 			tx-dma-channel = <&pdma 16>;
 			rx-dma-channel = <&pdma 17>;
 			clocks = <&spi_m_clk>;
+			resets = <&rst SPIM1_RESET>;
+			reset-names = "spi";
 			status = "disabled";
 		};
 
-		sdr: sdr@ffc25000 {
+		sdr: sdr@ffcfb100 {
 			compatible = "altr,sdr-ctl", "syscon";
 			reg = <0xffcfb100 0x80>;
 		};
 
-		L2: l2-cache@fffff000 {
+		L2: cache-controller@fffff000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xfffff000 0x1000>;
 			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
@@ -618,7 +655,7 @@
 			arm,shared-override;
 		};
 
-		mmc: dwmmc0@ff808000 {
+		mmc: mmc@ff808000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "altr,socfpga-dw-mshc";
@@ -627,19 +664,22 @@
 			fifo-depth = <0x400>;
 			clocks = <&l4_mp_clk>, <&sdmmc_clk>;
 			clock-names = "biu", "ciu";
+			resets = <&rst SDMMC_RESET>;
+			altr,sysmgr-syscon = <&sysmgr 0x28 4>;
 			status = "disabled";
 		};
 
-		nand: nand@ffb90000 {
+		nand: nand-controller@ffb90000 {
 			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "denali,denali-nand-dt", "altr,socfpga-denali-nand";
+			#size-cells = <0>;
+			compatible = "altr,socfpga-denali-nand";
 			reg = <0xffb90000 0x72000>,
 			      <0xffb80000 0x10000>;
 			reg-names = "nand_data", "denali_reg";
 			interrupts = <0 99 4>;
-			dma-mask = <0xffffffff>;
-			clocks = <&nand_clk>;
+			clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
+			clock-names = "nand", "nand_x", "ecc";
+			resets = <&rst NAND_RESET>;
 			status = "disabled";
 		};
 
@@ -696,6 +736,16 @@
 					     <37 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
+			sdmmca-ecc@ff8c2c00 {
+				compatible = "altr,socfpga-sdmmc-ecc";
+				reg = <0xff8c2c00 0x400>;
+				altr,ecc-parent = <&mmc>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+					     <47 IRQ_TYPE_LEVEL_HIGH>,
+					     <16 IRQ_TYPE_LEVEL_HIGH>,
+					     <48 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			dma-ecc@ff8c8000 {
 				compatible = "altr,socfpga-dma-ecc";
 				reg = <0xff8c8000 0x400>;
@@ -714,7 +764,7 @@
 		};
 
 		qspi: spi@ff809000 {
-			compatible = "cdns,qspi-nor";
+			compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xff809000 0x100>,
@@ -724,6 +774,8 @@
 			cdns,fifo-width = <4>;
 			cdns,trigger-address = <0x00000000>;
 			clocks = <&qspi_clk>;
+			resets = <&rst QSPI_RESET>, <&rst QSPI_OCP_RESET>;
+			reset-names = "qspi", "qspi-ocp";
 			status = "disabled";
 		};
 
@@ -749,7 +801,7 @@
 		timer@ffffc600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xffffc600 0x100>;
-			interrupts = <1 13 0xf04>;
+			interrupts = <1 13 0xf01>;
 			clocks = <&mpu_periph_clk>;
 		};
 
@@ -759,6 +811,8 @@
 			reg = <0xffc02700 0x100>;
 			clocks = <&l4_sp_clk>;
 			clock-names = "timer";
+			resets = <&rst SPTIMER0_RESET>;
+			reset-names = "timer";
 		};
 
 		timer1: timer1@ffc02800 {
@@ -767,6 +821,8 @@
 			reg = <0xffc02800 0x100>;
 			clocks = <&l4_sp_clk>;
 			clock-names = "timer";
+			resets = <&rst SPTIMER1_RESET>;
+			reset-names = "timer";
 		};
 
 		timer2: timer2@ffd00000 {
@@ -775,33 +831,39 @@
 			reg = <0xffd00000 0x100>;
 			clocks = <&l4_sys_free_clk>;
 			clock-names = "timer";
+			resets = <&rst L4SYSTIMER0_RESET>;
+			reset-names = "timer";
 		};
 
 		timer3: timer3@ffd00100 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0xffd01000 0x100>;
+			reg = <0xffd00100 0x100>;
 			clocks = <&l4_sys_free_clk>;
 			clock-names = "timer";
+			resets = <&rst L4SYSTIMER1_RESET>;
+			reset-names = "timer";
 		};
 
-		uart0: serial0@ffc02000 {
+		uart0: serial@ffc02000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc02000 0x100>;
 			interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&l4_sp_clk>;
+			resets = <&rst UART0_RESET>;
 			status = "disabled";
 		};
 
-		uart1: serial1@ffc02100 {
+		uart1: serial@ffc02100 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc02100 0x100>;
 			interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&l4_sp_clk>;
+			resets = <&rst UART1_RESET>;
 			status = "disabled";
 		};
 
@@ -842,6 +904,7 @@
 			reg = <0xffd00200 0x100>;
 			interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&l4_sys_free_clk>;
+			resets = <&rst L4WD0_RESET>;
 			status = "disabled";
 		};
 
@@ -850,6 +913,7 @@
 			reg = <0xffd00300 0x100>;
 			interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&l4_sys_free_clk>;
+			resets = <&rst L4WD1_RESET>;
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_chameleonv3.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_chameleonv3.dts
new file mode 100644
index 000000000000..422d00cd4c74
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_chameleonv3.dts
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2022 Google LLC
+ */
+/dts-v1/;
+#include "socfpga_arria10_mercury_aa1.dtsi"
+
+/ {
+	model = "Google Chameleon V3";
+	compatible = "google,chameleon-v3", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+
+	aliases {
+		serial0 = &uart0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	ssm2603: audio-codec@1a {
+		compatible = "adi,ssm2603";
+		reg = <0x1a>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	u80: gpio@21 {
+		compatible = "nxp,pca9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SOM_AUD_MUTE",
+			"DP1_OUT_CEC_EN",
+			"DP2_OUT_CEC_EN",
+			"DP1_SOM_PS8469_CAD",
+			"DPD_SOM_PS8469_CAD",
+			"DP_OUT_PWR_EN",
+			"STM32_RST_L",
+			"STM32_BOOT0",
+
+			"FPGA_PROT",
+			"STM32_FPGA_COMM0",
+			"TP119",
+			"TP120",
+			"TP121",
+			"TP122",
+			"TP123",
+			"TP124";
+	};
+};
+
+&mmc {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1.dtsi
new file mode 100644
index 000000000000..c80201bce793
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1.dtsi
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2022 Google LLC
+ */
+
+#include "socfpga_arria10.dtsi"
+
+/ {
+
+	model = "Enclustra Mercury+ AA1";
+	compatible = "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+
+	aliases {
+		ethernet0 = &gmac0;
+		serial1 = &uart1;
+		spi0 = &qspi;
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x80000000>; /* 2GB */
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	/* Adjusted the i2c labels to use generic base-board dtsi files for
+	 * Enclustra Arria10 and Cyclone5 SoMs.
+	 *
+	 * The set of i2c0 and i2c1 labels defined in socfpga_cyclone5.dtsi and in
+	 * socfpga_arria10.dtsi do not allow for using the same base-board .dtsi
+	 * fragments. Thus define generic labels here to match the correct i2c
+	 * bus in a generic base-board .dtsi file.
+	 */
+	soc {
+		i2c_encl: i2c@ffc02300 {
+		};
+		i2c_encl_fpga: i2c@ffc02200 {
+		};
+	};
+};
+
+&i2c_encl {
+	status = "okay";
+	i2c-sda-hold-time-ns = <300>;
+	clock-frequency = <100000>;
+
+	atsha204a: crypto@64 {
+		compatible = "atmel,atsha204a";
+		reg = <0x64>;
+	};
+
+	isl12022: rtc@6f {
+		compatible = "isil,isl12022";
+		reg = <0x6f>;
+	};
+};
+
+&i2c_encl_fpga {
+	i2c-sda-hold-time-ns = <300>;
+	status = "disabled";
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-addr = <0xffffffff>; /* probe for phy addr */
+	max-frame-size = <3800>;
+	phy-handle = <&phy3>;
+
+	/delete-property/ mac-address;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy3: ethernet-phy@3 {
+			reg = <3>;
+
+			/* Add 2ns RX clock delay (1.2ns + 0.78ns)*/
+			rxc-skew-ps = <1680>; /* 780ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+
+			/* Add 1.38ns TX clock delay (0.96ns + 0.42ns)*/
+			txc-skew-ps = <1860>; /* 960ps */
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			txen-skew-ps = <0>; /* -420ps */
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "disabled";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+/* Following mappings are taken from arria10 socdk dts */
+&mmc {
+	status = "okay";
+	cap-sd-highspeed;
+	broken-cd;
+	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
+};
+
+&osc1 {
+	clock-frequency = <33330000>;
+};
+
+&eccmgr {
+	sdmmca-ecc@ff8c2c00 {
+		compatible = "altr,socfpga-sdmmc-ecc";
+		reg = <0xff8c2c00 0x400>;
+		altr,ecc-parent = <&mmc>;
+		interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+					 <47 IRQ_TYPE_LEVEL_HIGH>,
+					 <16 IRQ_TYPE_LEVEL_HIGH>,
+					 <48 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&qspi {
+	status = "okay";
+	flash0: flash@0 {
+		u-boot,dm-pre-reloc;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		spi-max-frequency = <10000000>;
+
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@raw {
+			label = "Flash Raw";
+			reg = <0x0 0x4000000>;
+		};
+	};
+};
+
+&watchdog1 {
+	status = "disabled";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_emmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_emmc.dts
new file mode 100644
index 000000000000..b6cca0b5fd09
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_emmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_pe1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_emmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ PE1 Base Board";
+	compatible = "enclustra,mercury-sa1-pe1", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_qspi.dts
new file mode 100644
index 000000000000..6ad023477cd2
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_pe1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ AA1 on Mercury+ PE1 Base Board";
+	compatible = "enclustra,mercury-aa1-pe1", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_sdmmc.dts
new file mode 100644
index 000000000000..653c9a86516b
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_pe1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ AA1 on Mercury+ PE1 Base Board";
+	compatible = "enclustra,mercury-aa1-pe1", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_emmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_emmc.dts
new file mode 100644
index 000000000000..ae9c7c6a2370
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_emmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_pe3.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_emmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ AA1 on Mercury+ PE3 Base Board";
+	compatible = "enclustra,mercury-aa1-pe3", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_qspi.dts
new file mode 100644
index 000000000000..c3a0c30a07a5
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_pe3.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ AA1 on Mercury+ PE3 Base Board";
+	compatible = "enclustra,mercury-aa1-pe3", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_sdmmc.dts
new file mode 100644
index 000000000000..dc1e1ad20381
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_pe3.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ AA1 on Mercury+ PE3 Base Board";
+	compatible = "enclustra,mercury-aa1-pe3", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_emmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_emmc.dts
new file mode 100644
index 000000000000..61d5e4c85d9b
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_emmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_st1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_emmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ AA1 on Mercury+ ST1 Base Board";
+	compatible = "enclustra,mercury-aa1-st1", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_qspi.dts
new file mode 100644
index 000000000000..a3b99c9b16fd
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_st1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ AA1 on Mercury+ ST1 Base Board";
+	compatible = "enclustra,mercury-aa1-st1", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_sdmmc.dts
new file mode 100644
index 000000000000..5deb289e2b55
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_st1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ AA1 on Mercury+ ST1 Base Board";
+	compatible = "enclustra,mercury-aa1-st1", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk.dtsi
index 3a32de9ded3b..ec7365444a3b 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk.dtsi
@@ -1,24 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2015 Altera Corporation <www.altera.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "socfpga_arria10.dtsi"
 
 / {
 	model = "Altera SOCFPGA Arria 10";
-	compatible = "altr,socfpga-arria10", "altr,socfpga";
+	compatible = "altr,socfpga-arria10-socdk", "altr,socfpga-arria10", "altr,socfpga";
 
 	aliases {
 		ethernet0 = &gmac0;
@@ -60,6 +48,13 @@
 		};
 	};
 
+	ref_033v: 033-v-ref {
+		compatible = "regulator-fixed";
+		regulator-name = "0.33V";
+		regulator-min-microvolt = <330000>;
+		regulator-max-microvolt = <330000>;
+	};
+
 	soc {
 		clkmgr@ffd04000 {
 			clocks {
@@ -140,6 +135,18 @@
 	i2c-sda-falling-time-ns = <6000>;
 	i2c-scl-falling-time-ns = <6000>;
 
+	adc@14 {
+		compatible = "lltc,ltc2497";
+		reg = <0x14>;
+		vref-supply = <&ref_033v>;
+	};
+
+	adc@16 {
+		compatible = "lltc,ltc2497";
+		reg = <0x16>;
+		vref-supply = <&ref_033v>;
+	};
+
 	eeprom@51 {
 		compatible = "atmel,24c32";
 		reg = <0x51>;
@@ -155,6 +162,11 @@
 		compatible = "ltc2977";
 		reg = <0x5c>;
 	};
+
+	temp@4c {
+		compatible = "maxim,max1619";
+		reg = <0x4c>;
+	};
 };
 
 &uart1 {
@@ -163,6 +175,7 @@
 
 &usb0 {
 	status = "okay";
+	disable-over-current;
 };
 
 &watchdog1 {
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_nand.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_nand.dts
new file mode 100644
index 000000000000..a662df319a84
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_nand.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015 Altera Corporation. All rights reserved.
+ */
+
+/dts-v1/;
+#include "socfpga_arria10_socdk.dtsi"
+
+&nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "Boot and fpga data";
+			reg = <0x0 0x02500000>;
+		};
+		partition@1c00000 {
+			label = "Root Filesystem - JFFS2";
+			reg = <0x02500000 0x05500000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts
new file mode 100644
index 000000000000..0434f1c7b665
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 Intel. All rights reserved.
+ */
+
+/dts-v1/;
+#include "socfpga_arria10_socdk.dtsi"
+
+&qspi {
+	status = "okay";
+
+	flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,read-delay = <3>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@qspi-boot {
+			label = "Boot and fpga data";
+			reg = <0x0 0x2720000>;
+		};
+
+		partition@qspi-rootfs {
+			label = "Root Filesystem - JFFS2";
+			reg = <0x2720000 0x58E0000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_sdmmc.dts
new file mode 100644
index 000000000000..d3969367f4b5
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_sdmmc.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014-2015 Altera Corporation <www.altera.com>
+ */
+
+/dts-v1/;
+#include "socfpga_arria10_socdk.dtsi"
+
+&mmc {
+	status = "okay";
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	broken-cd;
+	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
+};
+
+&eccmgr {
+	sdmmca-ecc@ff8c2c00 {
+		compatible = "altr,socfpga-sdmmc-ecc";
+		reg = <0xff8c2c00 0x400>;
+		altr,ecc-parent = <&mmc>;
+		interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+			     <47 IRQ_TYPE_LEVEL_HIGH>,
+			     <16 IRQ_TYPE_LEVEL_HIGH>,
+			     <48 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria5.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria5.dtsi
new file mode 100644
index 000000000000..40fecde65c54
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria5.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ */
+
+/dts-v1/;
+/* First 4KB has trampoline code for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+#include "socfpga.dtsi"
+
+/ {
+	soc {
+		clkmgr@ffd04000 {
+			clocks {
+				osc1 {
+					clock-frequency = <25000000>;
+				};
+			};
+		};
+
+		mmc0: mmc@ff704000 {
+			broken-cd;
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
+			clk-phase-sd-hs = <0>, <135>;
+		};
+
+		sysmgr@ffd08000 {
+			cpu1-start-addr = <0xffd080c4>;
+		};
+	};
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts
new file mode 100644
index 000000000000..7342f5942b0d
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ */
+
+#include "socfpga_arria5.dtsi"
+
+/ {
+	model = "Altera SOCFPGA Arria V SoC Development Kit";
+	compatible = "altr,socfpga-arria5-socdk", "altr,socfpga-arria5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/* this allow the ethaddr uboot environmnet variable contents
+		* to be added to the gmac1 device tree blob.
+		*/
+		ethernet0 = &gmac1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-hps0 {
+			label = "hps_led0";
+			gpios = <&porta 0 1>;
+		};
+
+		led-hps1 {
+			label = "hps_led1";
+			gpios = <&portb 11 1>;
+		};
+
+		led-hps2 {
+			label = "hps_led2";
+			gpios = <&porta 17 1>;
+		};
+
+		led-hps3 {
+			label = "hps_led3";
+			gpios = <&porta 18 1>;
+		};
+	};
+
+	regulator_3_3v: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <2600>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <2000>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	/*
+	 * adjust the falling times to decrease the i2c frequency to 50Khz
+	 * because the LCD module does not work at the standard 100Khz
+	 */
+	i2c-sda-falling-time-ns = <5000>;
+	i2c-scl-falling-time-ns = <5000>;
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@qspi-boot {
+			/* 8MB for raw data. */
+			label = "Flash 0 Raw Data";
+			reg = <0x0 0x800000>;
+		};
+
+		partition@qspi-rootfs {
+			/* 120MB for jffs2 data. */
+			label = "Flash 0 jffs2 Filesystem";
+			reg = <0x800000 0x7800000>;
+		};
+	};
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5.dtsi
new file mode 100644
index 000000000000..305fe207b237
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ */
+
+/dts-v1/;
+/* First 4KB has trampoline code for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+#include "socfpga.dtsi"
+
+/ {
+	soc {
+		clkmgr@ffd04000 {
+			clocks {
+				osc1 {
+					clock-frequency = <25000000>;
+				};
+			};
+		};
+
+		mmc0: mmc@ff704000 {
+			broken-cd;
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
+			clk-phase-sd-hs = <0>, <135>;
+		};
+
+		sysmgr@ffd08000 {
+			cpu1-start-addr = <0xffd080c4>;
+		};
+	};
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_chameleon96.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_chameleon96.dts
new file mode 100644
index 000000000000..76262f1e5e03
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_chameleon96.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for the Chameleon96
+ *
+ * Copyright (c) 2018 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Novetech Chameleon96";
+	compatible = "novtech,chameleon96", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x20000000>; /* 512MB */
+	};
+
+	regulator_3_3v: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led1 {
+			label = "green:user1";
+			gpios = <&porta 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user_led2 {
+			label = "green:user2";
+			gpios = <&porta 22 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user_led3 {
+			label = "green:user3";
+			gpios = <&porta 25 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		user_led4 {
+			label = "green:user4";
+			gpios = <&portb 3 GPIO_ACTIVE_LOW>;
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c0 {
+	/* On Low speed expansion */
+	label = "LS-I2C0";
+	status = "okay";
+};
+
+&i2c1 {
+	/* On Low speed expansion */
+	label = "LS-I2C1";
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	/* On High speed expansion */
+	label = "HS-I2C2";
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
+};
+
+&spi0 {
+	/* On High speed expansion */
+	label = "HS-SPI1";
+	status = "okay";
+};
+
+&spi1 {
+	/* On Low speed expansion */
+	label = "LS-SPI0";
+	status = "okay";
+};
+
+&uart0 {
+	/* On Low speed expansion */
+	label = "LS-UART1";
+	status = "okay";
+};
+
+&uart1 {
+	/* On Low speed expansion */
+	label = "LS-UART0";
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de0_nano_soc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de0_nano_soc.dts
new file mode 100644
index 000000000000..bedf577cb056
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de0_nano_soc.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Terasic DE-0(Atlas)";
+	compatible = "terasic,de0-atlas", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
+	regulator_3_3v: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-hps0 {
+			label = "hps_led0";
+			gpios = <&portb 24 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	txd0-skew-ps = <0>; /* -420ps */
+	txd1-skew-ps = <0>; /* -420ps */
+	txd2-skew-ps = <0>; /* -420ps */
+	txd3-skew-ps = <0>; /* -420ps */
+	rxd0-skew-ps = <420>; /* 0ps */
+	rxd1-skew-ps = <420>; /* 0ps */
+	rxd2-skew-ps = <420>; /* 0ps */
+	rxd3-skew-ps = <420>; /* 0ps */
+	txen-skew-ps = <0>; /* -420ps */
+	txc-skew-ps = <1860>; /* 960ps */
+	rxdv-skew-ps = <420>; /* 0ps */
+	rxc-skew-ps = <1680>; /* 780ps */
+
+	max-frame-size = <3800>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	adxl345: adxl345@53 {
+		compatible = "adi,adxl345";
+		reg = <0x53>;
+
+		interrupt-parent = <&portc>;
+		interrupts = <3 2>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de10nano.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de10nano.dts
new file mode 100644
index 000000000000..ec25106caacf
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de10nano.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017, Intel Corporation
+ *
+ * based on socfpga_cyclone5_de0_nano_soc.dts
+ */
+/dts-v1/;
+
+#include "socfpga_cyclone5.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Terasic DE10-Nano";
+	compatible = "terasic,de10-nano", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		/* 1 GiB */
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	soc {
+		fpga: bus@ff200000 {
+			compatible = "simple-bus";
+			reg = <0xff200000 0x00200000>;
+			ranges = <0x00000000 0xff200000 0x00200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/*
+			 * Here the devices will appear if an FPGA image is
+			 * loaded. Their description is expected to be added
+			 * using a device tree overlay that matches the image.
+			 */
+		};
+	};
+};
+
+&gmac1 {
+	/* Uses a KSZ9031RNX phy */
+	phy-mode = "rgmii-id";
+	rxd0-skew-ps = <420>;
+	rxd1-skew-ps = <420>;
+	rxd2-skew-ps = <420>;
+	rxd3-skew-ps = <420>;
+	txen-skew-ps = <0>;
+	rxdv-skew-ps = <420>;
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	accelerometer@53 {
+		compatible = "adi,adxl345";
+		reg = <0x53>;
+		/* HPS_GSENSOR_INT is routed to UART0_RX/CAN0_RX/SPIM0_SS1/HPS_GPIO61 */
+		interrupt-parent = <&portc>;
+		interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "INT1";
+	};
+};
+
+&mmc0 {
+	/* micro SD card socket J11 */
+	status = "okay";
+};
+
+&uart0 {
+	/*
+	 * Accessible via USB (FT232R) on Mini-USB plug J4
+	 * RX = TRACE_D0/SPIS0_CLK/UART0_RX/HPS_GPIO49
+	 * TX = TRACE_D1/SPIS0_MOSI/UART0_TX/HPS_GPIO50
+	 * no handshaking lines
+	 */
+	clock-frequency = <100000000>;
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcv.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcv.dtsi
new file mode 100644
index 000000000000..3b9daddf91cd
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcv.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Aries/DENX MCV";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1 GiB */
+	};
+};
+
+&mmc0 {	/* On-SoM eMMC */
+	bus-width = <8>;
+	clk-phase-sd-hs = <0>, <135>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts
new file mode 100644
index 000000000000..c1e1264bcb09
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+#include "socfpga_cyclone5_mcv.dtsi"
+
+/ {
+	model = "Aries/DENX MCV EVK";
+	compatible = "denx,mcvevk", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	aliases {
+		ethernet0 = &gmac0;
+		stmpe-i2c0 = &stmpe1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&gmac0 {
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&gpio0 {	/* GPIO  0 ... 28 */
+	status = "okay";
+};
+
+&gpio1 {	/* GPIO 29 ... 57 */
+	status = "okay";
+};
+
+&gpio2 {	/* GPIO 58..66 (HLGPI 0..13 at offset 13) */
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	stmpe1: stmpe811@41 {
+		compatible = "st,stmpe811";
+		reg = <0x41>;
+		id = <0>;
+		blocks = <0x5>;
+		irq-gpio = <&portb 28 0x4>;     /* GPIO 57, trig. level HI */
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			ts,sample-time = <4>;
+			ts,mod-12b = <1>;
+			ts,ref-sel = <0>;
+			ts,adc-freq = <1>;
+			ts,ave-ctrl = <1>;
+			ts,touch-det-delay = <3>;
+			ts,settling = <4>;
+			ts,fraction-z = <7>;
+			ts,i-drive = <1>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1.dtsi
new file mode 100644
index 000000000000..49944f9632f9
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1.dtsi
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
+	/* Adjusted the i2c labels to use generic base-board dtsi files for
+	 * Enclustra Arria10 and Cyclone5 SoMs.
+	 *
+	 * The set of i2c0 and i2c1 labels defined in socfpga_cyclone5.dtsi and in
+	 * socfpga_arria10.dtsi do not allow for using the same base-board .dtsi
+	 * fragments. Thus define generic labels here to match the correct i2c
+	 * bus in a generic base-board .dtsi file.
+	 */
+	soc {
+		i2c_encl: i2c@ffc04000 {
+		};
+		i2c_encl_fpga: i2c@ffc05000 {
+		};
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+};
+
+&osc1 {
+	clock-frequency = <50000000>;
+};
+
+&i2c_encl {
+	i2c-sda-hold-time-ns = <300>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	isl12020: rtc@6f {
+		compatible = "isil,isl12022";
+		reg = <0x6f>;
+	};
+};
+
+&i2c_encl_fpga {
+	i2c-sda-hold-time-ns = <300>;
+	status = "disabled";
+};
+
+&uart0 {
+	clock-frequency = <100000000>;
+};
+
+&mmc0 {
+	status = "okay";
+	/delete-property/ cap-mmc-highspeed;
+	/delete-property/ cap-sd-highspeed;
+};
+
+&qspi {
+	status = "okay";
+
+	flash0: flash@0 {
+		u-boot,dm-pre-reloc;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		spi-max-frequency = <10000000>;
+
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@raw {
+			label = "Flash Raw";
+			reg = <0x0 0x4000000>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+	/delete-property/ mac-address;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy3>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy3: ethernet-phy@3 {
+			reg = <3>;
+
+			/* Add 2ns RX clock delay (1.2ns + 0.78ns)*/
+			rxc-skew-ps = <1680>;
+			rxd0-skew-ps = <420>;
+			rxd1-skew-ps = <420>;
+			rxd2-skew-ps = <420>;
+			rxd3-skew-ps = <420>;
+			rxdv-skew-ps = <420>;
+
+			/* Add 1.38ns TX clock delay (0.96ns + 0.42ns)*/
+			txc-skew-ps = <1860>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+			txen-skew-ps = <0>;
+		};
+	};
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_emmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_emmc.dts
new file mode 100644
index 000000000000..85d6146da0da
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_emmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_pe1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_emmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ PE1 Base Board";
+	compatible = "enclustra,mercury-sa1-pe1", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_qspi.dts
new file mode 100644
index 000000000000..770ab680a18c
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_pe1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ PE1 Base Board";
+	compatible = "enclustra,mercury-sa1-pe1", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_sdmmc.dts
new file mode 100644
index 000000000000..990ca0fec61e
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_pe1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ PE1 Base Board";
+	compatible = "enclustra,mercury-sa1-pe1", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_emmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_emmc.dts
new file mode 100644
index 000000000000..6c8fd5b0d6eb
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_emmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_pe3.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_emmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ PE3 Base Board";
+	compatible = "enclustra,mercury-sa1-pe3", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_qspi.dts
new file mode 100644
index 000000000000..3292426078a1
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_pe3.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ PE3 Base Board";
+	compatible = "enclustra,mercury-sa1-pe3", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_sdmmc.dts
new file mode 100644
index 000000000000..1eb10b5244dd
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_pe3.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ PE3 Base Board";
+	compatible = "enclustra,mercury-sa1-pe3", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_emmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_emmc.dts
new file mode 100644
index 000000000000..8c97b5b3adea
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_emmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_st1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_emmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ ST1 Base Board";
+	compatible = "enclustra,mercury-sa1-st1", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_qspi.dts
new file mode 100644
index 000000000000..e6d14b22e41d
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_st1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ ST1 Base Board";
+	compatible = "enclustra,mercury-sa1-st1", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_sdmmc.dts
new file mode 100644
index 000000000000..beaeca94d4df
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_st1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ ST1 Base Board";
+	compatible = "enclustra,mercury-sa1-st1", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2.dtsi
new file mode 100644
index 000000000000..0b28964e0378
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2.dtsi
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ SA2";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
+	/* Adjusted the i2c labels to use generic base-board dtsi files for
+	 * Enclustra Arria10 and Cyclone5 SoMs.
+	 *
+	 * The set of i2c0 and i2c1 labels defined in socfpga_cyclone5.dtsi and in
+	 * socfpga_arria10.dtsi do not allow for using the same base-board .dtsi
+	 * fragments. Thus define generic labels here to match the correct i2c
+	 * bus in a generic base-board .dtsi file.
+	 */
+	soc {
+		i2c_encl: i2c@ffc04000 {
+		};
+		i2c_encl_fpga: i2c@ffc05000 {
+		};
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x80000000>; /* 2GB */
+	};
+};
+
+&osc1 {
+	clock-frequency = <50000000>;
+};
+
+&i2c_encl {
+	i2c-sda-hold-time-ns = <300>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	isl12020: rtc@6f {
+		compatible = "isil,isl12022";
+		reg = <0x6f>;
+	};
+
+	atsha204a: crypto@64 {
+		compatible = "atmel,atsha204a";
+		reg = <0x64>;
+	};
+};
+
+&i2c_encl_fpga {
+	i2c-sda-hold-time-ns = <300>;
+	status = "disabled";
+};
+
+&uart0 {
+	clock-frequency = <100000000>;
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	flash0: flash@0 {
+		u-boot,dm-pre-reloc;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		spi-max-frequency = <10000000>;
+
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@raw {
+			label = "Flash Raw";
+			reg = <0x0 0x4000000>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+	/delete-property/ mac-address;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy3>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy3: ethernet-phy@3 {
+			reg = <3>;
+
+			/* Add 2ns RX clock delay (1.2ns + 0.78ns)*/
+			rxc-skew-ps = <1680>;
+			rxd0-skew-ps = <420>;
+			rxd1-skew-ps = <420>;
+			rxd2-skew-ps = <420>;
+			rxd3-skew-ps = <420>;
+			rxdv-skew-ps = <420>;
+
+			/* Add 1.38ns TX clock delay (0.96ns + 0.42ns)*/
+			txc-skew-ps = <1860>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+			txen-skew-ps = <0>;
+		};
+	};
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_qspi.dts
new file mode 100644
index 000000000000..6f79d9ed1d36
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa2.dtsi"
+#include "socfpga_enclustra_mercury_pe1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ SA2 on Mercury+ PE1 Base Board";
+	compatible = "enclustra,mercury-sa2-pe1", "enclustra,mercury-sa2",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_sdmmc.dts
new file mode 100644
index 000000000000..b94bd8bafc26
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa2.dtsi"
+#include "socfpga_enclustra_mercury_pe1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ SA2 on Mercury+ PE1 Base Board";
+	compatible = "enclustra,mercury-sa2-pe1", "enclustra,mercury-sa2",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_qspi.dts
new file mode 100644
index 000000000000..51fc4a22937a
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa2.dtsi"
+#include "socfpga_enclustra_mercury_pe3.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ SA2 on Mercury+ PE3 Base Board";
+	compatible = "enclustra,mercury-sa2-pe3", "enclustra,mercury-sa2",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_sdmmc.dts
new file mode 100644
index 000000000000..e4209209f4fa
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa2.dtsi"
+#include "socfpga_enclustra_mercury_pe3.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ SA2 on Mercury+ PE3 Base Board";
+	compatible = "enclustra,mercury-sa2-pe3", "enclustra,mercury-sa2",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_qspi.dts
new file mode 100644
index 000000000000..ab4549a0d455
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa2.dtsi"
+#include "socfpga_enclustra_mercury_st1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ SA2 on Mercury+ ST1 Base Board";
+	compatible = "enclustra,mercury-sa2-st1", "enclustra,mercury-sa2",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_sdmmc.dts
new file mode 100644
index 000000000000..ebe62879c3fb
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa2.dtsi"
+#include "socfpga_enclustra_mercury_st1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ SA2 on Mercury+ ST1 Base Board";
+	compatible = "enclustra,mercury-sa2-st1", "enclustra,mercury-sa2",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts
new file mode 100644
index 000000000000..97622febc44e
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Altera SOCFPGA Cyclone V SoC Development Kit";
+	compatible = "altr,socfpga-cyclone5-socdk", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/* this allow the ethaddr uboot environmnet variable contents
+		 * to be added to the gmac1 device tree blob.
+		 */
+		ethernet0 = &gmac1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-hps0 {
+			label = "hps_led0";
+			gpios = <&portb 15 1>;
+		};
+
+		led-hps1 {
+			label = "hps_led1";
+			gpios = <&portb 14 1>;
+		};
+
+		led-hps2 {
+			label = "hps_led2";
+			gpios = <&portb 13 1>;
+		};
+
+		led-hps3 {
+			label = "hps_led3";
+			gpios = <&portb 12 1>;
+		};
+	};
+
+	regulator_3_3v: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <2600>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <2000>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	/*
+	 * adjust the falling times to decrease the i2c frequency to 50Khz
+	 * because the LCD module does not work at the standard 100Khz
+	 */
+	i2c-sda-falling-time-ns = <5000>;
+	i2c-scl-falling-time-ns = <5000>;
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&portb 18 0>;
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <0>;	/* chip select */
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@qspi-boot {
+			/* 8MB for raw data. */
+			label = "Flash 0 Raw Data";
+			reg = <0x0 0x800000>;
+		};
+
+		partition@qspi-rootfs {
+			/* 120MB for jffs2 data. */
+			label = "Flash 0 jffs2 Filesystem";
+			reg = <0x800000 0x7800000>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts
index a4a555c19d94..9e4db7407f1a 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts
@@ -1,18 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
- *  Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
  */
 
 #include "socfpga_cyclone5.dtsi"
@@ -123,7 +111,7 @@
 		};
 	};
 
-	regulator_3_3v: vcc3p3-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC3P3";
 		regulator-min-microvolt = <3300000>;
@@ -181,13 +169,11 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socrates.dts
new file mode 100644
index 000000000000..ca18b959e655
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socrates.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "EBV SOCrates";
+	compatible = "ebv,socrates", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	leds: gpio-leds {
+	};
+};
+
+&gmac1 {
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc: rtc@68 {
+		compatible = "st,m41t82";
+		reg = <0x68>;
+	};
+};
+
+&leds {
+	compatible = "gpio-leds";
+
+	led0 {
+		label = "led:green:heartbeat";
+		gpios = <&porta 28 1>;
+		linux,default-trigger = "heartbeat";
+	};
+
+	led1 {
+		label = "led:green:D7";
+		gpios = <&portb 19 1>;
+	};
+
+	led2 {
+		label = "led:green:D8";
+		gpios = <&portb 25 1>;
+	};
+};
+
+&mmc {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
new file mode 100644
index 000000000000..e4794ccb8e41
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Altera SOCFPGA Cyclone V SoC Macnica Sodia board";
+	compatible = "macnica,sodia", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
+	regulator_3_3v: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		hps_led0 {
+			label = "hps:green:led0";
+			gpios = <&portb 12 GPIO_ACTIVE_LOW>;
+		};
+
+		hps_led1 {
+			label = "hps:green:led1";
+			gpios = <&portb 13 GPIO_ACTIVE_LOW>;
+		};
+
+		hps_led2 {
+			label = "hps:green:led2";
+			gpios = <&portb 14 GPIO_ACTIVE_LOW>;
+		};
+
+		hps_led3 {
+			label = "hps:green:led3";
+			gpios = <&portb 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy = <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0: ethernet-phy@4 {
+			reg = <4>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&portb 18 0>;
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q512a", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+	};
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
new file mode 100644
index 000000000000..170c1ae441a6
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "samtec VIN|ING FPGA";
+	compatible = "samtec,vining", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/*
+		 * This allow the ethaddr uboot environment variable contents
+		 * to be added to the gmac1 device tree blob.
+		 */
+		ethernet0 = &gmac1;
+		ethernet1 = &gmac0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		hps_temp0 {
+			label = "BTN_0";			/* TEMP_OS */
+			gpios = <&portc 18 GPIO_ACTIVE_LOW>;	/* HPS_GPI5 */
+			linux,code = <BTN_0>;
+		};
+
+		hps_hkey0 {
+			label = "GP_SWITCH";			/* GP_SWITCH */
+			gpios = <&portc 19 GPIO_ACTIVE_LOW>;	/* HPS_GPI6 */
+			linux,code = <BTN_1>;
+		};
+
+		hps_hkey1 {
+			label = "RESET_SWITCH";			/* RESET_SWITCH */
+			gpios = <&portc 20 GPIO_ACTIVE_LOW>;	/* HPS_GPI7 */
+			linux,code = <BTN_2>;
+		};
+
+		hps_hkey2 {
+			label = "POWER_DOWN";			/* POWER_DOWN */
+			gpios = <&portc 4 GPIO_ACTIVE_LOW>;	/* HPS_GPIO62 */
+			linux,code = <KEY_POWER>;
+		};
+
+		hps_hkey3 {
+			label = "SENSE";			/* SENSE */
+			gpios = <&porta 9 GPIO_ACTIVE_LOW>;	/* HPS_GPIO9 */
+			linux,code = <BTN_3>;
+		};
+	};
+
+	regulator-usb-nrst {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_nrst";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&portb 5 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy1>;
+
+	snps,reset-gpio = <&porta 0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <10000 10000 10000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+			txen-skew-ps = <0>;
+			txc-skew-ps = <1860>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <1860>;
+		};
+	};
+};
+
+&gpio0 {	/* GPIO 0..29 */
+	status = "okay";
+};
+
+&gpio1 {	/* GPIO 30..57 */
+	status = "okay";
+};
+
+&gpio2 {	/* GPIO 58..66 (HLGPI 0..13 at offset 13) */
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	gpio: pca9557@1f {
+		compatible = "nxp,pca9557";
+		reg = <0x1f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	temp: temperature-sensor@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c01";
+		pagesize = <8>;
+		reg = <0x50>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c@6 {	/* Backplane EEPROM */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			eeprom@51 {
+				compatible = "atmel,24c01";
+				pagesize = <8>;
+				reg = <0x51>;
+			};
+		};
+
+		i2c@7 {	/* Power board EEPROM */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			eeprom@51 {
+				compatible = "atmel,24c01";
+				pagesize = <8>;
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		pagesize = <8>;
+		reg = <0x50>;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q128", "jedec,spi-nor";
+		reg = <0>;		/* chip select */
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <1>;		/* chip select */
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+	};
+};
+
+&usb0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_emmc.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_emmc.dtsi
new file mode 100644
index 000000000000..d79cb64da0de
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_emmc.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+&qspi {
+	status = "disabled";
+};
+
+&mmc {
+	bus-width = <8>;
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_qspi.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_qspi.dtsi
new file mode 100644
index 000000000000..5ba21dd8f5ba
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_qspi.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+&mmc {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_sdmmc.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_sdmmc.dtsi
new file mode 100644
index 000000000000..2b102e0b6217
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_sdmmc.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+&qspi {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe1.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe1.dtsi
new file mode 100644
index 000000000000..abc4bfb7fccf
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe1.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+&i2c_encl {
+	status = "okay";
+
+	eeprom@57 {
+		status = "okay";
+		compatible = "microchip,24c128";
+		reg = <0x57>;
+		pagesize = <64>;
+		label = "user eeprom";
+		address-width = <16>;
+	};
+
+	lm96080: temperature-sensor@2f {
+		status = "okay";
+		compatible = "national,lm80";
+		reg = <0x2f>;
+	};
+
+	si5338: clock-controller@70 {
+		compatible = "silabs,si5338";
+		reg = <0x70>;
+	};
+
+};
+
+&i2c_encl_fpga {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe3.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe3.dtsi
new file mode 100644
index 000000000000..bc57b0680878
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe3.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+&i2c_encl {
+	i2c-mux@74 {
+		status = "okay";
+		compatible = "nxp,pca9547";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@56 {
+				status = "okay";
+				compatible = "microchip,24c128";
+				reg = <0x56>;
+				pagesize = <64>;
+				label = "user eeprom";
+				address-width = <16>;
+			};
+
+			lm96080: temperature-sensor@2f {
+				status = "okay";
+				compatible = "national,lm80";
+				reg = <0x2f>;
+			};
+
+			pcal6416: gpio@20 {
+				status = "okay";
+				compatible = "nxp,pcal6416";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
+
+&i2c_encl_fpga {
+	status = "okay";
+
+	i2c-mux@75 {
+		status = "okay";
+		compatible = "nxp,pca9547";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+	};
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_st1.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_st1.dtsi
new file mode 100644
index 000000000000..4c00475f4303
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_st1.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+&i2c_encl {
+	si5338: clock-controller@70 {
+		compatible = "silabs,si5338";
+		reg = <0x70>;
+	};
+};
+
+&i2c_encl_fpga {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_vt.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_vt.dts
new file mode 100644
index 000000000000..845ab2cc5ce6
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_vt.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ */
+
+/dts-v1/;
+#include "socfpga.dtsi"
+
+/ {
+	model = "Altera SOCFPGA VT";
+	compatible = "altr,socfpga-vt", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		clkmgr@ffd04000 {
+			clocks {
+				osc1 {
+					clock-frequency = <10000000>;
+				};
+			};
+		};
+
+		mmc@ff704000 {
+			broken-cd;
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
+		};
+
+		ethernet@ff700000 {
+			phy-mode = "gmii";
+			status = "okay";
+		};
+
+		timer0@ffc08000 {
+			clock-frequency = <7000000>;
+		};
+
+		timer1@ffc09000 {
+			clock-frequency = <7000000>;
+		};
+
+		timer2@ffd00000 {
+			clock-frequency = <7000000>;
+		};
+
+		timer3@ffd01000 {
+			clock-frequency = <7000000>;
+		};
+
+		serial@ffc02000 {
+			clock-frequency = <7372800>;
+		};
+
+		serial@ffc03000 {
+			clock-frequency = <7372800>;
+		};
+
+		sysmgr@ffd08000 {
+			cpu1-start-addr = <0xffd08010>;
+		};
+	};
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "gmii";
+};
diff --git a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
deleted file mode 100644
index d56d68fe7ffc..000000000000
--- a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright 2014 Texas Instruments, Inc.
- *
- * Keystone 2 Edison SoC specific device tree
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-clocks {
-	mainpllclk: mainpllclk@2310110 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,main-pll-clock";
-		clocks = <&refclksys>;
-		reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
-		reg-names = "control", "multiplier", "post-divider";
-	};
-
-	papllclk: papllclk@2620358 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkpass>;
-		clock-output-names = "papllclk";
-		reg = <0x02620358 4>;
-		reg-names = "control";
-	};
-
-	ddr3apllclk: ddr3apllclk@2620360 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkddr3a>;
-		clock-output-names = "ddr-3a-pll-clk";
-		reg = <0x02620360 4>;
-		reg-names = "control";
-	};
-
-	clkusb1: clkusb1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk16>;
-		clock-output-names = "usb1";
-		reg = <0x02350004 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkhyperlink0: clkhyperlink0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "hyperlink-0";
-		reg = <0x02350030 0xb00>, <0x02350014 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <5>;
-	};
-
-	clkpcie1: clkpcie1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "pcie1";
-		reg = <0x0235006c 0xb00>, <0x02350048 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <18>;
-	};
-
-	clkxge: clkxge {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "xge";
-		reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <29>;
-	};
-};
diff --git a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
deleted file mode 100644
index ba828cb59587..000000000000
--- a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * Device Tree Source for Keystone 2 Edison Netcp driver
- *
- * Copyright 2015 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-qmss: qmss@2a40000 {
-	compatible = "ti,keystone-navigator-qmss";
-	dma-coherent;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	clocks = <&chipclk13>;
-	ranges;
-	queue-range	= <0 0x2000>;
-	linkram0	= <0x100000 0x4000>;
-	linkram1	= <0 0x10000>;
-
-	qmgrs {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		qmgr0 {
-			managed-queues = <0 0x2000>;
-			reg = <0x2a40000 0x20000>,
-			      <0x2a06000 0x400>,
-			      <0x2a02000 0x1000>,
-			      <0x2a03000 0x1000>,
-			      <0x23a80000 0x20000>,
-			      <0x2a80000 0x20000>;
-			reg-names = "peek", "status", "config",
-				    "region", "push", "pop";
-		};
-	};
-	queue-pools {
-		qpend {
-			qpend-0 {
-				qrange = <658 8>;
-				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
-					     0 43 0xf04 0 44 0xf04 0 45 0xf04
-					     0 46 0xf04 0 47 0xf04>;
-			};
-			qpend-1 {
-				qrange = <528 16>;
-				interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
-					      0 51 0xf04 0 52 0xf04 0 53 0xf04
-					      0 54 0xf04 0 55 0xf04 0 56 0xf04
-					      0 57 0xf04 0 58 0xf04 0 59 0xf04
-					      0 60 0xf04 0 61 0xf04 0 62 0xf04
-					      0 63 0xf04>;
-				qalloc-by-id;
-			};
-			qpend-2 {
-				qrange = <544 16>;
-				interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
-					      0 59 0xf04 0 68 0xf04 0 69 0xf04
-					      0 70 0xf04 0 71 0xf04 0 72 0xf04
-					      0 73 0xf04 0 74 0xf04 0 75 0xf04
-					      0 76 0xf04 0 77 0xf04 0 78 0xf04
-					      0 79 0xf04>;
-			};
-		};
-		general-purpose {
-			gp-0 {
-				qrange = <4000 64>;
-			};
-			netcp-tx {
-				qrange = <896 128>;
-				qalloc-by-id;
-			};
-		};
-		accumulator {
-			acc-low-0 {
-				qrange = <480 32>;
-				accumulator = <0 47 16 2 50>;
-				interrupts = <0 226 0xf01>;
-				multi-queue;
-				qalloc-by-id;
-			};
-		};
-	};
-
-	descriptor-regions {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		region-12 {
-			id = <12>;
-			region-spec = <8192 128>;	/* num_desc desc_size */
-			link-index = <0x4000>;
-		};
-	};
-
-	pdsps {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		pdsp0@0x2a10000 {
-			reg = <0x2a10000 0x1000    /*iram */
-			       0x2a0f000 0x100     /*reg*/
-			       0x2a0c000 0x3c8	   /*intd */
-			       0x2a20000 0x4000>;  /*cmd*/
-			id = <0>;
-		};
-	};
-}; /* qmss */
-
-knav_dmas: knav_dmas@0 {
-	compatible = "ti,keystone-navigator-dma";
-	clocks = <&papllclk>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-	ti,navigator-cloud-address = <0x23a80000 0x23a90000
-				 0x23a80000 0x23a90000>;
-
-	dma_gbe: dma_gbe@0 {
-		reg = <0x24186000 0x100>,
-			  <0x24187000 0x2a0>,
-			  <0x24188000 0xb60>,
-			  <0x24186100 0x80>,
-			  <0x24189000 0x1000>;
-		reg-names = "global", "txchan", "rxchan",
-				"txsched", "rxflow";
-	};
-};
-
-netcp: netcp@24000000 {
-	reg = <0x2620110 0x8>;
-	reg-names = "efuse";
-	compatible = "ti,netcp-1.0";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	/* NetCP address range */
-	ranges = <0 0x24000000 0x1000000>;
-
-	clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>;
-	clock-names = "pa_clk", "ethss_clk", "cpts";
-	dma-coherent;
-
-	ti,navigator-dmas = <&dma_gbe 0>,
-			<&dma_gbe 8>,
-			<&dma_gbe 0>;
-	ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
-
-	netcp-devices {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		gbe@200000 { /* ETHSS */
-			label = "netcp-gbe";
-			compatible = "ti,netcp-gbe-9";
-			reg = <0x200000 0x900>, <0x220000 0x20000>;
-			/* enable-ale; */
-			tx-queue = <896>;
-			tx-channel = "nettx";
-
-			interfaces {
-				gbe0: interface-0 {
-					slave-port = <0>;
-					link-interface	= <1>;
-					phy-handle	= <&ethphy0>;
-				};
-				gbe1: interface-1 {
-					slave-port = <1>;
-					link-interface	= <1>;
-					phy-handle	= <&ethphy1>;
-				};
-			};
-
-			secondary-slave-ports {
-				port-2 {
-					slave-port = <2>;
-					link-interface	= <2>;
-				};
-				port-3 {
-					slave-port = <3>;
-					link-interface	= <2>;
-				};
-				port-4 {
-					slave-port = <4>;
-					link-interface	= <2>;
-				};
-				port-5 {
-					slave-port = <5>;
-					link-interface	= <2>;
-				};
-				port-6 {
-					slave-port = <6>;
-					link-interface	= <2>;
-				};
-				port-7 {
-					slave-port = <7>;
-					link-interface	= <2>;
-				};
-			};
-		};
-	};
-
-	netcp-interfaces {
-		interface-0 {
-			rx-channel = "netrx0";
-			rx-pool = <1024 12>;
-			tx-pool = <1024 12>;
-			rx-queue-depth = <128 128 0 0>;
-			rx-buffer-size = <1518 4096 0 0>;
-			rx-queue = <528>;
-			tx-completion-queue = <530>;
-			efuse-mac = <1>;
-			netcp-gbe = <&gbe0>;
-
-		};
-		interface-1 {
-			rx-channel = "netrx1";
-			rx-pool = <1024 12>;
-			tx-pool = <1024 12>;
-			rx-queue-depth = <128 128 0 0>;
-			rx-buffer-size = <1518 4096 0 0>;
-			rx-queue = <529>;
-			tx-completion-queue = <531>;
-			efuse-mac = <0>;
-			local-mac-address = [02 18 31 7e 3e 00];
-			netcp-gbe = <&gbe1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
deleted file mode 100644
index 61883cb969d2..000000000000
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Device Tree Source for K2G EVM
- *
- * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-/dts-v1/;
-
-#include "keystone-k2g.dtsi"
-
-/ {
-	compatible =  "ti,k2g-evm", "ti,k2g", "ti,keystone";
-	model = "Texas Instruments K2G General Purpose EVM";
-
-	memory@800000000 {
-		device_type = "memory";
-		reg = <0x00000008 0x00000000 0x00000000 0x80000000>;
-	};
-
-};
-
-&k2g_pinctrl {
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x11cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/keystone-k2g-ice.dts b/arch/arm/boot/dts/keystone-k2g-ice.dts
deleted file mode 100644
index d820d37b5148..000000000000
--- a/arch/arm/boot/dts/keystone-k2g-ice.dts
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Device Tree Source for K2G Industrial Communication Engine EVM
- *
- * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
- *
- * SPDX-License-Identifier: GPL-2.0
- */
-/dts-v1/;
-
-#include "keystone-k2g.dtsi"
-
-/ {
-	compatible = "ti,k2g-ice", "ti,k2g", "ti,keystone";
-	model = "Texas Instruments K2G Industrial Communication EVM";
-
-	memory@800000000 {
-		device_type = "memory";
-		reg = <0x00000008 0x00000000 0x00000000 0x20000000>;
-	};
-};
-
-&k2g_pinctrl {
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			K2G_CORE_IOPAD(0x11cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
deleted file mode 100644
index a789f75a1ed5..000000000000
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Device Tree Source for K2G SOC
- *
- * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/keystone.h>
-
-/ {
-	compatible = "ti,k2g","ti,keystone";
-	model = "Texas Instruments K2G SoC";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&gic>;
-
-	chosen { };
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	gic: interrupt-controller@02561000 {
-		compatible = "arm,gic-400", "arm,cortex-a15-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x0 0x02561000 0x0 0x1000>,
-		      <0x0 0x02562000 0x0 0x2000>,
-		      <0x0 0x02564000 0x0 0x2000>,
-		      <0x0 0x02566000 0x0 0x2000>;
-		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
-				IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts =
-			<GIC_PPI 13
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#pinctrl-cells = <1>;
-		compatible = "ti,keystone","simple-bus";
-		ranges = <0x0 0x0 0x0 0xc0000000>;
-		dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
-
-		msm_ram: msmram@0c000000 {
-			compatible = "mmio-sram";
-			reg = <0x0c000000 0x100000>;
-			ranges = <0x0 0x0c000000 0x100000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			sram-bm@f7000 {
-				reg = <0x000f7000 0x8000>;
-			};
-		};
-
-		k2g_pinctrl: pinmux@02621000 {
-			compatible = "pinctrl-single";
-			reg = <0x02621000 0x410>;
-			pinctrl-single,register-width = <32>;
-			pinctrl-single,function-mask = <0x001b0007>;
-		};
-
-		devctrl: device-state-control@02620000 {
-			compatible = "ti,keystone-devctrl", "syscon";
-			reg = <0x02620000 0x1000>;
-		};
-
-		uart0: serial@02530c00 {
-			compatible = "ti,da830-uart", "ns16550a";
-			current-speed = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			reg = <0x02530c00 0x100>;
-			interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>;
-			clock-frequency = <200000000>;
-			status = "disabled";
-		};
-
-		kirq0: keystone_irq@026202a0 {
-			compatible = "ti,keystone-irq";
-			interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			ti,syscon-dev = <&devctrl 0x2a0>;
-		};
-
-		dspgpio0: keystone_dsp_gpio@02620240 {
-			compatible = "ti,keystone-dsp-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio,syscon-dev = <&devctrl 0x240>;
-		};
-
-		msgmgr: msgmgr@02a00000 {
-			compatible = "ti,k2g-message-manager";
-			#mbox-cells = <2>;
-			reg-names = "queue_proxy_region",
-				    "queue_state_debug_region";
-			reg = <0x02a00000 0x400000>, <0x028c3400 0x400>;
-			interrupt-names = "rx_005",
-					  "rx_057";
-			interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
deleted file mode 100644
index 2156ff92d08f..000000000000
--- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * Copyright 2013-2014 Texas Instruments, Inc.
- *
- * Keystone 2 Kepler/Hawking EVM device tree
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "keystone.dtsi"
-#include "keystone-k2hk.dtsi"
-
-/ {
-	compatible =  "ti,k2hk-evm", "ti,k2hk", "ti,keystone";
-	model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
-
-	soc {
-		clocks {
-			refclksys: refclksys {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <122880000>;
-				clock-output-names = "refclk-sys";
-			};
-
-			refclkpass: refclkpass {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <122880000>;
-				clock-output-names = "refclk-pass";
-			};
-
-			refclkarm: refclkarm {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <125000000>;
-				clock-output-names = "refclk-arm";
-			};
-
-			refclkddr3a: refclkddr3a {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <100000000>;
-				clock-output-names = "refclk-ddr3a";
-			};
-
-			refclkddr3b: refclkddr3b {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <100000000>;
-				clock-output-names = "refclk-ddr3b";
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		debug1_1 {
-			label = "keystone:green:debug1";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
-		};
-
-		debug1_2 {
-			label = "keystone:red:debug1";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
-		};
-
-		debug2 {
-			label = "keystone:blue:debug2";
-			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
-		};
-
-		debug3 {
-			label = "keystone:blue:debug3";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
-		};
-	};
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&keystone_usb0 {
-	status = "okay";
-};
-
-&usb0 {
-	dr_mode = "host";
-};
-
-&aemif {
-	cs0 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		clock-ranges;
-		ranges;
-
-		ti,cs-chipselect = <0>;
-		/* all timings in nanoseconds */
-		ti,cs-min-turnaround-ns = <12>;
-		ti,cs-read-hold-ns = <6>;
-		ti,cs-read-strobe-ns = <23>;
-		ti,cs-read-setup-ns = <9>;
-		ti,cs-write-hold-ns = <8>;
-		ti,cs-write-strobe-ns = <23>;
-		ti,cs-write-setup-ns = <8>;
-
-		nand@0,0 {
-			compatible = "ti,keystone-nand","ti,davinci-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0 0 0x4000000
-			       1 0 0x0000100>;
-
-			ti,davinci-chipselect = <0>;
-			ti,davinci-mask-ale = <0x2000>;
-			ti,davinci-mask-cle = <0x4000>;
-			ti,davinci-mask-chipsel = <0>;
-			nand-ecc-mode = "hw";
-			ti,davinci-ecc-bits = <4>;
-			nand-on-flash-bbt;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "params";
-				reg = <0x100000 0x80000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "ubifs";
-				reg = <0x180000 0x1fe80000>;
-			};
-		};
-	};
-};
-
-&i2c0 {
-	dtt@50 {
-		compatible = "at,24c1024";
-		reg = <0x50>;
-	};
-};
-
-&spi0 {
-	nor_flash: n25q128a11@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "Micron,n25q128a11";
-		spi-max-frequency = <54000000>;
-		m25p,fast-read;
-		reg = <0>;
-
-		partition@0 {
-			label = "u-boot-spl";
-			reg = <0x0 0x80000>;
-			read-only;
-		};
-
-		partition@1 {
-			label = "misc";
-			reg = <0x80000 0xf80000>;
-		};
-	};
-};
-
-&mdio {
-	status = "ok";
-	ethphy0: ethernet-phy@0 {
-		compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi
deleted file mode 100644
index 69d449430511..000000000000
--- a/arch/arm/boot/dts/keystone-k2hk.dtsi
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Copyright 2013-2014 Texas Instruments, Inc.
- *
- * Keystone 2 Kepler/Hawking soc specific device tree
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/reset/ti-syscon.h>
-
-/ {
-	compatible = "ti,k2hk", "ti,keystone";
-	model = "Texas Instruments Keystone 2 Kepler/Hawking SoC";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		interrupt-parent = <&gic>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <1>;
-		};
-
-		cpu@2 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <2>;
-		};
-
-		cpu@3 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <3>;
-		};
-	};
-
-	soc {
-		/include/ "keystone-k2hk-clocks.dtsi"
-
-		msm_ram: msmram@0c000000 {
-			compatible = "mmio-sram";
-			reg = <0x0c000000 0x600000>;
-			ranges = <0x0 0x0c000000 0x600000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			sram-bm@5f0000 {
-				reg = <0x5f0000 0x8000>;
-			};
-		};
-
-		psc: power-sleep-controller@02350000 {
-			pscrst: reset-controller {
-				compatible = "ti,k2hk-pscrst", "ti,syscon-reset";
-				#reset-cells = <1>;
-
-				ti,reset-bits = <
-					0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */
-					0xa40 8 0xa40 8 0x840 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 1: dsp1 */
-					0xa44 8 0xa44 8 0x844 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 2: dsp2 */
-					0xa48 8 0xa48 8 0x848 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 3: dsp3 */
-					0xa4c 8 0xa4c 8 0x84c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 4: dsp4 */
-					0xa50 8 0xa50 8 0x850 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 5: dsp5 */
-					0xa54 8 0xa54 8 0x854 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 6: dsp6 */
-					0xa58 8 0xa58 8 0x858 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 7: dsp7 */
-				>;
-			};
-		};
-
-		dspgpio0: keystone_dsp_gpio@02620240 {
-			compatible = "ti,keystone-dsp-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio,syscon-dev = <&devctrl 0x240>;
-		};
-
-		dspgpio1: keystone_dsp_gpio@2620244 {
-			compatible = "ti,keystone-dsp-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio,syscon-dev = <&devctrl 0x244>;
-		};
-
-		dspgpio2: keystone_dsp_gpio@2620248 {
-			compatible = "ti,keystone-dsp-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio,syscon-dev = <&devctrl 0x248>;
-		};
-
-		dspgpio3: keystone_dsp_gpio@262024c {
-			compatible = "ti,keystone-dsp-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio,syscon-dev = <&devctrl 0x24c>;
-		};
-
-		dspgpio4: keystone_dsp_gpio@2620250 {
-			compatible = "ti,keystone-dsp-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio,syscon-dev = <&devctrl 0x250>;
-		};
-
-		dspgpio5: keystone_dsp_gpio@2620254 {
-			compatible = "ti,keystone-dsp-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio,syscon-dev = <&devctrl 0x254>;
-		};
-
-		dspgpio6: keystone_dsp_gpio@2620258 {
-			compatible = "ti,keystone-dsp-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio,syscon-dev = <&devctrl 0x258>;
-		};
-
-		dspgpio7: keystone_dsp_gpio@262025c {
-			compatible = "ti,keystone-dsp-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio,syscon-dev = <&devctrl 0x25c>;
-		};
-
-		mdio: mdio@02090300 {
-			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x02090300 0x100>;
-			status = "disabled";
-			clocks = <&clkcpgmac>;
-			clock-names = "fck";
-			bus_freq	= <2500000>;
-		};
-		/include/ "keystone-k2hk-netcp.dtsi"
-	};
-};
diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
deleted file mode 100644
index 056b42f99d7a..000000000000
--- a/arch/arm/boot/dts/keystone-k2l-evm.dts
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright 2014 Texas Instruments, Inc.
- *
- * Keystone 2 Lamarr EVM device tree
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "keystone.dtsi"
-#include "keystone-k2l.dtsi"
-
-/ {
-	compatible = "ti,k2l-evm", "ti,k2l", "ti,keystone";
-	model = "Texas Instruments Keystone 2 Lamarr EVM";
-
-	soc {
-		clocks {
-			refclksys: refclksys {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <122880000>;
-				clock-output-names = "refclk-sys";
-			};
-		};
-	};
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&keystone_usb0 {
-	status = "okay";
-};
-
-&usb0 {
-	dr_mode = "host";
-};
-
-&i2c0 {
-	dtt@50 {
-		compatible = "at,24c1024";
-		reg = <0x50>;
-	};
-};
-
-&aemif {
-	cs0 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		clock-ranges;
-		ranges;
-
-		ti,cs-chipselect = <0>;
-		/* all timings in nanoseconds */
-		ti,cs-min-turnaround-ns = <12>;
-		ti,cs-read-hold-ns = <6>;
-		ti,cs-read-strobe-ns = <23>;
-		ti,cs-read-setup-ns = <9>;
-		ti,cs-write-hold-ns = <8>;
-		ti,cs-write-strobe-ns = <23>;
-		ti,cs-write-setup-ns = <8>;
-
-		nand@0,0 {
-			compatible = "ti,keystone-nand","ti,davinci-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0 0 0x4000000
-			       1 0 0x0000100>;
-
-			ti,davinci-chipselect = <0>;
-			ti,davinci-mask-ale = <0x2000>;
-			ti,davinci-mask-cle = <0x4000>;
-			ti,davinci-mask-chipsel = <0>;
-			nand-ecc-mode = "hw";
-			ti,davinci-ecc-bits = <4>;
-			nand-on-flash-bbt;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "params";
-				reg = <0x100000 0x80000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "ubifs";
-				reg = <0x180000 0x7FE80000>;
-			};
-		};
-	};
-};
-
-&spi0 {
-	nor_flash: n25q128a11@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "Micron,n25q128a11";
-		spi-max-frequency = <54000000>;
-		m25p,fast-read;
-		reg = <0>;
-
-		partition@0 {
-			label = "u-boot-spl";
-			reg = <0x0 0x80000>;
-			read-only;
-		};
-
-		partition@1 {
-			label = "misc";
-			reg = <0x80000 0xf80000>;
-		};
-	};
-};
-
-&mdio {
-	status = "ok";
-	ethphy0: ethernet-phy@0 {
-		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
deleted file mode 100644
index 66f615a74118..000000000000
--- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * Device Tree Source for Keystone 2 Lamarr Netcp driver
- *
- * Copyright 2015 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-qmss: qmss@2a40000 {
-	compatible = "ti,keystone-navigator-qmss";
-	dma-coherent;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	clocks = <&chipclk13>;
-	ranges;
-	queue-range	= <0 0x2000>;
-	linkram0	= <0x100000 0x4000>;
-	linkram1	= <0x70000000 0x10000>; /* 1MB OSR mem */
-
-	qmgrs {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		qmgr0 {
-			managed-queues = <0 0x2000>;
-			reg = <0x2a40000 0x20000>,
-			      <0x2a06000 0x400>,
-			      <0x2a02000 0x1000>,
-			      <0x2a03000 0x1000>,
-			      <0x23a80000 0x20000>,
-			      <0x2a80000 0x20000>;
-			reg-names = "peek", "status", "config",
-				    "region", "push", "pop";
-		};
-	};
-	queue-pools {
-		qpend {
-			qpend-0 {
-				qrange = <658 8>;
-				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
-					     0 43 0xf04 0 44 0xf04 0 45 0xf04
-					     0 46 0xf04 0 47 0xf04>;
-			};
-			qpend-1 {
-				qrange = <528 16>;
-				interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
-					      0 51 0xf04 0 52 0xf04 0 53 0xf04
-					      0 54 0xf04 0 55 0xf04 0 56 0xf04
-					      0 57 0xf04 0 58 0xf04 0 59 0xf04
-					      0 60 0xf04 0 61 0xf04 0 62 0xf04
-					      0 63 0xf04>;
-				qalloc-by-id;
-			};
-			qpend-2 {
-				qrange = <544 16>;
-				interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
-					      0 59 0xf04 0 68 0xf04 0 69 0xf04
-					      0 70 0xf04 0 71 0xf04 0 72 0xf04
-					      0 73 0xf04 0 74 0xf04 0 75 0xf04
-					      0 76 0xf04 0 77 0xf04 0 78 0xf04
-					      0 79 0xf04>;
-			};
-		};
-		general-purpose {
-			gp-0 {
-				qrange = <4000 64>;
-			};
-			netcp-tx {
-				qrange = <896 128>;
-				qalloc-by-id;
-			};
-		};
-		accumulator {
-			acc-low-0 {
-				qrange = <480 32>;
-				accumulator = <0 47 16 2 50>;
-				interrupts = <0 226 0xf01>;
-				multi-queue;
-			};
-		};
-	};
-
-	descriptor-regions {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		region-12 {
-			id = <12>;
-			region-spec = <8192 128>;	/* num_desc desc_size */
-			link-index = <0x4000>;
-		};
-	};
-
-	pdsps {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		pdsp0@0x2a10000 {
-			reg = <0x2a10000 0x1000    /*iram */
-			       0x2a0f000 0x100     /*reg*/
-			       0x2a0c000 0x3c8	   /*intd */
-			       0x2a20000 0x4000>;  /*cmd*/
-			id = <0>;
-		};
-	};
-
-}; /* qmss */
-
-knav_dmas: knav_dmas@0 {
-	compatible = "ti,keystone-navigator-dma";
-	clocks = <&papllclk>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-	ti,navigator-cloud-address = <0x23a80000 0x23a90000>;
-
-	dma_gbe: dma_gbe@0 {
-		reg = <0x26186000 0x100>,
-			  <0x26187000 0x2a0>,
-			  <0x26188000 0xb60>,
-			  <0x26186100 0x80>,
-			  <0x26189000 0x1000>;
-		reg-names = "global", "txchan", "rxchan",
-				"txsched", "rxflow";
-	};
-};
-
-netcp: netcp@26000000 {
-	reg = <0x2620110 0x8>;
-	reg-names = "efuse";
-	compatible = "ti,netcp-1.0";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	/* NetCP address range */
-	ranges = <0 0x26000000 0x1000000>;
-
-	clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>;
-	clock-names = "pa_clk", "ethss_clk", "cpts";
-	dma-coherent;
-
-	ti,navigator-dmas = <&dma_gbe 0>,
-			<&dma_gbe 8>,
-			<&dma_gbe 0>;
-	ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
-
-	netcp-devices {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		gbe@200000 { /* ETHSS */
-			label = "netcp-gbe";
-			compatible = "ti,netcp-gbe-5";
-			reg = <0x200000 0x900>, <0x220000 0x20000>;
-			/* enable-ale; */
-			tx-queue = <896>;
-			tx-channel = "nettx";
-
-			interfaces {
-				gbe0: interface-0 {
-					slave-port = <0>;
-					link-interface	= <1>;
-					phy-handle	= <&ethphy0>;
-				};
-				gbe1: interface-1 {
-					slave-port = <1>;
-					link-interface	= <1>;
-					phy-handle	= <&ethphy1>;
-				};
-			};
-
-			secondary-slave-ports {
-				port-2 {
-					slave-port = <2>;
-					link-interface	= <2>;
-				};
-				port-3 {
-					slave-port = <3>;
-					link-interface	= <2>;
-				};
-			};
-		};
-	};
-
-	netcp-interfaces {
-		interface-0 {
-			rx-channel = "netrx0";
-			rx-pool = <1024 12>;
-			tx-pool = <1024 12>;
-			rx-queue-depth = <128 128 0 0>;
-			rx-buffer-size = <1518 4096 0 0>;
-			rx-queue = <528>;
-			tx-completion-queue = <530>;
-			efuse-mac = <1>;
-			netcp-gbe = <&gbe0>;
-
-		};
-		interface-1 {
-			rx-channel = "netrx1";
-			rx-pool = <1024 12>;
-			tx-pool = <1024 12>;
-			rx-queue-depth = <128 128 0 0>;
-			rx-buffer-size = <1518 4096 0 0>;
-			rx-queue = <529>;
-			tx-completion-queue = <531>;
-			efuse-mac = <0>;
-			local-mac-address = [02 18 31 7e 3e 7f];
-			netcp-gbe = <&gbe1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi
deleted file mode 100644
index 148650406cf7..000000000000
--- a/arch/arm/boot/dts/keystone-k2l.dtsi
+++ /dev/null
@@ -1,297 +0,0 @@
-/*
- * Copyright 2014 Texas Instruments, Inc.
- *
- * Keystone 2 Lamarr SoC specific device tree
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/reset/ti-syscon.h>
-
-/ {
-	compatible = "ti,k2l", "ti,keystone";
-	model = "Texas Instruments Keystone 2 Lamarr SoC";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		interrupt-parent = <&gic>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <1>;
-		};
-	};
-
-	soc {
-		/include/ "keystone-k2l-clocks.dtsi"
-
-		uart2: serial@02348400 {
-			compatible = "ti,da830-uart", "ns16550a";
-			current-speed = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			reg = <0x02348400 0x100>;
-			clocks	= <&clkuart2>;
-			interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		uart3:	serial@02348800 {
-			compatible = "ti,da830-uart", "ns16550a";
-			current-speed = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			reg = <0x02348800 0x100>;
-			clocks	= <&clkuart3>;
-			interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		k2l_pmx: pinmux@02620690 {
-			compatible = "pinctrl-single";
-			reg = <0x02620690 0xc>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#pinctrl-cells = <2>;
-			pinctrl-single,bit-per-mux;
-			pinctrl-single,register-width = <32>;
-			pinctrl-single,function-mask = <0x1>;
-			status = "disabled";
-
-			uart3_emifa_pins: pinmux_uart3_emifa_pins {
-				pinctrl-single,bits = <
-					/* UART3_EMIFA_SEL */
-					0x0 0x0  0xc0
-				>;
-			};
-
-			uart2_emifa_pins: pinmux_uart2_emifa_pins {
-			pinctrl-single,bits = <
-					/* UART2_EMIFA_SEL */
-					0x0 0x0  0x30
-				>;
-			};
-
-			uart01_spi2_pins: pinmux_uart01_spi2_pins {
-				pinctrl-single,bits = <
-					/* UART01_SPI2_SEL */
-					0x0 0x0 0x4
-				>;
-			};
-
-			dfesync_rp1_pins: pinmux_dfesync_rp1_pins{
-				pinctrl-single,bits = <
-					/* DFESYNC_RP1_SEL */
-					0x0 0x0 0x2
-				>;
-			};
-
-			avsif_pins: pinmux_avsif_pins {
-				pinctrl-single,bits = <
-					/* AVSIF_SEL */
-					0x0 0x0 0x1
-				>;
-			};
-
-			gpio_emu_pins: pinmux_gpio_emu_pins {
-				pinctrl-single,bits = <
-				/*
-				 * GPIO_EMU_SEL[31]: 0-GPIO31, 1-EMU33
-				 * GPIO_EMU_SEL[30]: 0-GPIO30, 1-EMU32
-				 * GPIO_EMU_SEL[29]: 0-GPIO29, 1-EMU31
-				 * GPIO_EMU_SEL[28]: 0-GPIO28, 1-EMU30
-				 * GPIO_EMU_SEL[27]: 0-GPIO27, 1-EMU29
-				 * GPIO_EMU_SEL[26]: 0-GPIO26, 1-EMU28
-				 * GPIO_EMU_SEL[25]: 0-GPIO25, 1-EMU27
-				 * GPIO_EMU_SEL[24]: 0-GPIO24, 1-EMU26
-				 * GPIO_EMU_SEL[23]: 0-GPIO23, 1-EMU25
-				 * GPIO_EMU_SEL[22]: 0-GPIO22, 1-EMU24
-				 * GPIO_EMU_SEL[21]: 0-GPIO21, 1-EMU23
-				 * GPIO_EMU_SEL[20]: 0-GPIO20, 1-EMU22
-				 * GPIO_EMU_SEL[19]: 0-GPIO19, 1-EMU21
-				 * GPIO_EMU_SEL[18]: 0-GPIO18, 1-EMU20
-				 * GPIO_EMU_SEL[17]: 0-GPIO17, 1-EMU19
-				 */
-					0x4 0x0000 0xFFFE0000
-				>;
-			};
-
-			gpio_timio_pins: pinmux_gpio_timio_pins {
-				pinctrl-single,bits = <
-				/*
-				 * GPIO_TIMIO_SEL[15]: 0-GPIO15, 1-TIMO7
-				 * GPIO_TIMIO_SEL[14]: 0-GPIO14, 1-TIMO6
-				 * GPIO_TIMIO_SEL[13]: 0-GPIO13, 1-TIMO5
-				 * GPIO_TIMIO_SEL[12]: 0-GPIO12, 1-TIMO4
-				 * GPIO_TIMIO_SEL[11]: 0-GPIO11, 1-TIMO3
-				 * GPIO_TIMIO_SEL[10]: 0-GPIO10, 1-TIMO2
-				 * GPIO_TIMIO_SEL[9]: 0-GPIO9, 1-TIMI7
-				 * GPIO_TIMIO_SEL[8]: 0-GPIO8, 1-TIMI6
-				 * GPIO_TIMIO_SEL[7]: 0-GPIO7, 1-TIMI5
-				 * GPIO_TIMIO_SEL[6]: 0-GPIO6, 1-TIMI4
-				 * GPIO_TIMIO_SEL[5]: 0-GPIO5, 1-TIMI3
-				 * GPIO_TIMIO_SEL[4]: 0-GPIO4, 1-TIMI2
-				 */
-					0x4 0x0 0xFFF0
-				>;
-			};
-
-			gpio_spi2cs_pins: pinmux_gpio_spi2cs_pins {
-				pinctrl-single,bits = <
-				/*
-				 * GPIO_SPI2CS_SEL[3]: 0-GPIO3, 1-SPI2CS4
-				 * GPIO_SPI2CS_SEL[2]: 0-GPIO2, 1-SPI2CS3
-				 * GPIO_SPI2CS_SEL[1]: 0-GPIO1, 1-SPI2CS2
-				 * GPIO_SPI2CS_SEL[0]: 0-GPIO0, 1-SPI2CS1
-				 */
-					0x4 0x0 0xF
-				>;
-			};
-
-			gpio_dfeio_pins: pinmux_gpio_dfeio_pins {
-				pinctrl-single,bits = <
-				/*
-				 * GPIO_DFEIO_SEL[31]: 0-DFEIO17, 1-GPIO63
-				 * GPIO_DFEIO_SEL[30]: 0-DFEIO16, 1-GPIO62
-				 * GPIO_DFEIO_SEL[29]: 0-DFEIO15, 1-GPIO61
-				 * GPIO_DFEIO_SEL[28]: 0-DFEIO14, 1-GPIO60
-				 * GPIO_DFEIO_SEL[27]: 0-DFEIO13, 1-GPIO59
-				 * GPIO_DFEIO_SEL[26]: 0-DFEIO12, 1-GPIO58
-				 * GPIO_DFEIO_SEL[25]: 0-DFEIO11, 1-GPIO57
-				 * GPIO_DFEIO_SEL[24]: 0-DFEIO10, 1-GPIO56
-				 * GPIO_DFEIO_SEL[23]: 0-DFEIO9, 1-GPIO55
-				 * GPIO_DFEIO_SEL[22]: 0-DFEIO8, 1-GPIO54
-				 * GPIO_DFEIO_SEL[21]: 0-DFEIO7, 1-GPIO53
-				 * GPIO_DFEIO_SEL[20]: 0-DFEIO6, 1-GPIO52
-				 * GPIO_DFEIO_SEL[19]: 0-DFEIO5, 1-GPIO51
-				 * GPIO_DFEIO_SEL[18]: 0-DFEIO4, 1-GPIO50
-				 * GPIO_DFEIO_SEL[17]: 0-DFEIO3, 1-GPIO49
-				 * GPIO_DFEIO_SEL[16]: 0-DFEIO2, 1-GPIO48
-				 */
-					0x8 0x0 0xFFFF0000
-				>;
-			};
-
-			gpio_emifa_pins: pinmux_gpio_emifa_pins {
-				pinctrl-single,bits = <
-				/*
-				 * GPIO_EMIFA_SEL[15]: 0-EMIFA17, 1-GPIO47
-				 * GPIO_EMIFA_SEL[14]: 0-EMIFA16, 1-GPIO46
-				 * GPIO_EMIFA_SEL[13]: 0-EMIFA15, 1-GPIO45
-				 * GPIO_EMIFA_SEL[12]: 0-EMIFA14, 1-GPIO44
-				 * GPIO_EMIFA_SEL[11]: 0-EMIFA13, 1-GPIO43
-				 * GPIO_EMIFA_SEL[10]: 0-EMIFA10, 1-GPIO42
-				 * GPIO_EMIFA_SEL[9]: 0-EMIFA9, 1-GPIO41
-				 * GPIO_EMIFA_SEL[8]: 0-EMIFA8, 1-GPIO40
-				 * GPIO_EMIFA_SEL[7]: 0-EMIFA7, 1-GPIO39
-				 * GPIO_EMIFA_SEL[6]: 0-EMIFA6, 1-GPIO38
-				 * GPIO_EMIFA_SEL[5]: 0-EMIFA5, 1-GPIO37
-				 * GPIO_EMIFA_SEL[4]: 0-EMIFA4, 1-GPIO36
-				 * GPIO_EMIFA_SEL[3]: 0-EMIFA3, 1-GPIO35
-				 * GPIO_EMIFA_SEL[2]: 0-EMIFA2, 1-GPIO34
-				 * GPIO_EMIFA_SEL[1]: 0-EMIFA1, 1-GPIO33
-				 * GPIO_EMIFA_SEL[0]: 0-EMIFA0, 1-GPIO32
-				 */
-					0x8 0x0 0xFFFF
-				>;
-			};
-		};
-
-		msm_ram: msmram@0c000000 {
-			compatible = "mmio-sram";
-			reg = <0x0c000000 0x200000>;
-			ranges = <0x0 0x0c000000 0x200000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			sram-bm@1f8000 {
-				reg = <0x001f8000 0x8000>;
-			};
-		};
-
-		psc: power-sleep-controller@02350000 {
-			pscrst: reset-controller {
-				compatible = "ti,k2l-pscrst", "ti,syscon-reset";
-				#reset-cells = <1>;
-
-				ti,reset-bits = <
-					0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */
-					0xa40 8 0xa40 8 0x840 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 1: dsp1 */
-					0xa44 8 0xa44 8 0x844 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 2: dsp2 */
-					0xa48 8 0xa48 8 0x848 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 3: dsp3 */
-				>;
-			};
-		};
-
-		osr: sram@70000000 {
-			compatible = "mmio-sram";
-			reg = <0x70000000 0x10000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&clkosr>;
-		};
-
-		dspgpio0: keystone_dsp_gpio@02620240 {
-			compatible = "ti,keystone-dsp-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio,syscon-dev = <&devctrl 0x240>;
-		};
-
-		dspgpio1: keystone_dsp_gpio@2620244 {
-			compatible = "ti,keystone-dsp-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio,syscon-dev = <&devctrl 0x244>;
-		};
-
-		dspgpio2: keystone_dsp_gpio@2620248 {
-			compatible = "ti,keystone-dsp-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio,syscon-dev = <&devctrl 0x248>;
-		};
-
-		dspgpio3: keystone_dsp_gpio@262024c {
-			compatible = "ti,keystone-dsp-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio,syscon-dev = <&devctrl 0x24c>;
-		};
-
-		mdio: mdio@26200f00 {
-			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x26200f00 0x100>;
-			status = "disabled";
-			clocks = <&clkcpgmac>;
-			clock-names = "fck";
-			bus_freq	= <2500000>;
-		};
-		/include/ "keystone-k2l-netcp.dtsi"
-	};
-};
-
-&spi0 {
-       ti,davinci-spi-num-cs = <5>;
-};
-
-&spi1 {
-       ti,davinci-spi-num-cs = <3>;
-};
-
-&spi2 {
-       ti,davinci-spi-num-cs = <5>;
-       /* Pin muxed. Enabled and configured by Bootloader */
-       status = "disabled";
-};
diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
deleted file mode 100644
index 720c210d491d..000000000000
--- a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
+++ /dev/null
@@ -1,51 +0,0 @@
-/ {
-	mbus@f1000000 {
-		pciec: pcie-controller@82000000 {
-			compatible = "marvell,kirkwood-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
-
-			pcie0: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			compatible = "marvell,98dx4122-pinctrl";
-
-		};
-	};
-};
-
-&sata_phy0 {
-	status = "disabled";
-};
-
-&sata_phy1 {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/kirkwood-db-88f6281.dts
deleted file mode 100644
index aee6f02b1c80..000000000000
--- a/arch/arm/boot/dts/kirkwood-db-88f6281.dts
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Marvell DB-88F6281-BP Development Board Setup
- *
- * Saeed Bishara <saeed@marvell.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood-db.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Marvell DB-88F6281-BP Development Board";
-	compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-};
-
-&pciec {
-        status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/kirkwood-db-88f6282.dts
deleted file mode 100644
index e8b23e13ec0c..000000000000
--- a/arch/arm/boot/dts/kirkwood-db-88f6282.dts
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Marvell DB-88F6282-BP Development Board Setup
- *
- * Saeed Bishara <saeed@marvell.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood-db.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
-	model = "Marvell DB-88F6282-BP Development Board";
-	compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-};
-
-&pciec {
-        status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-ds409slim.dts b/arch/arm/boot/dts/kirkwood-ds409slim.dts
deleted file mode 100644
index cae5af4b88b5..000000000000
--- a/arch/arm/boot/dts/kirkwood-ds409slim.dts
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology 409slim";
-	compatible = "synology,ds409slim", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-32-35 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-20 {
-		status = "okay";
-	};
-};
-
-&rs5c372 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi
deleted file mode 100644
index b9125e5ed076..000000000000
--- a/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * Device Tree common file for kirkwood-6282 based Buffalo Linkstation
- *
- * Copyright (C) 2015, 2016
- * Roger Shimizu <rogershimizu@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-linkstation.dtsi"
-
-/ {
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_power_hdd0: pmx-power-hdd0 {
-				marvell,pins = "mpp8";
-				marvell,function = "gpio";
-			};
-			pmx_usb_vbus: pmx-usb-vbus {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-			pmx_fan_high: pmx-fan-high {
-				marvell,pins = "mpp16";
-				marvell,function = "gpio";
-			};
-			pmx_fan_low: pmx-fan-low {
-				marvell,pins = "mpp17";
-				marvell,function = "gpio";
-			};
-			pmx_led_alarm: pmx-led-alarm {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-			pmx_led_function_red: pmx-led-function-red {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-			pmx_led_info: pmx-led-info {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-			pmx_led_function_blue: pmx-led-function-blue {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-			pmx_led_power: pmx-led-power {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-			pmx_fan_lock: pmx-fan-lock {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_button_function: pmx-button-function {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-			pmx_power_switch: pmx-power-switch {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_power_auto_switch: pmx-power-auto-switch {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-		};
-	};
-
-	gpio_keys {
-		function-button {
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		};
-
-		power-on-switch {
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		};
-
-		power-auto-switch {
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_leds {
-		red-alarm-led {
-			label = "linkstation:red:alarm";
-			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-		};
-
-		red-function-led {
-			label = "linkstation:red:function";
-			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		amber-info-led {
-			label = "linkstation:amber:info";
-			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		};
-
-		blue-function-led {
-			label = "linkstation:blue:function";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		blue-power-led {
-			label = "linkstation:blue:power";
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-	};
-
-	gpio_fan {
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
-		pinctrl-names = "default";
-
-		gpios = <&gpio0 17 GPIO_ACTIVE_LOW
-			 &gpio0 16 GPIO_ACTIVE_LOW>;
-
-		gpio-fan,speed-map = <0 3
-				1500 2
-				3250 1
-				5000 0>;
-
-		alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-	};
-
-	regulators {
-		usb_power: regulator@1 {
-			gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		hdd_power0: regulator@2 {
-			gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		device_type = "ethernet-phy";
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi
deleted file mode 100644
index 29d929535453..000000000000
--- a/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * Device Tree common file for kirkwood-6281 based 2-Bay Buffalo Linkstation
- *
- * Copyright (C) 2015, 2016
- * Roger Shimizu <rogershimizu@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-linkstation.dtsi"
-
-/ {
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_power_hdd0: pmx-power-hdd0 {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-			pmx_power_hdd1: pmx-power-hdd1 {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-			pmx_usb_vbus: pmx-usb-vbus {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-			pmx_led_alarm: pmx-led-alarm {
-				marvell,pins = "mpp49";
-				marvell,function = "gpio";
-			};
-			pmx_led_function_red: pmx-led-function-red {
-				marvell,pins = "mpp34";
-				marvell,function = "gpio";
-			};
-			pmx_led_function_blue: pmx-led-function-blue {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-			pmx_led_info: pmx-led-info {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-			pmx_led_power: pmx-led-power {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-			pmx_button_function: pmx-button-function {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-			pmx_power_switch: pmx-power-switch {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-			pmx_power_auto_switch: pmx-power-auto-switch {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-		};
-
-		sata@80000 {
-			nr-ports = <2>;
-		};
-	};
-
-	gpio_keys {
-		function-button {
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-
-		power-on-switch {
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-		};
-
-		power-auto-switch {
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_leds {
-		red-alarm-led {
-			label = "linkstation:red:alarm";
-			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-		};
-
-		red-function-led {
-			label = "linkstation:red:function";
-			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		amber-info-led {
-			label = "linkstation:amber:info";
-			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-		};
-
-		blue-function-led {
-			label = "linkstation:blue:function";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-		};
-
-		blue-power-led {
-			label = "linkstation:blue:power";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-	};
-
-	regulators {
-		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
-
-		usb_power: regulator@1 {
-			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		hdd_power0: regulator@2 {
-			gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-		};
-
-		hdd_power1: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "HDD1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy1: ethernet-phy@8 {
-		device_type = "ethernet-phy";
-		reg = <8>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts
deleted file mode 100644
index 9cc05203baee..000000000000
--- a/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Device Tree file for Buffalo Linkstation LS-QVL
- *
- * Copyright (C) 2016, Mario Lange <mario_lange@gmx.net>
- *
- * Based on kirkwood-linkstation-lswvl.dts,
- * Copyright (C) 2015, 2016
- * Roger Shimizu <rogershimizu@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "kirkwood-linkstation-6282.dtsi"
-
-/ {
-	model = "Buffalo Linkstation LS-QVL";
-	compatible = "buffalo,lsqvl", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-	memory { /* 256 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_power_hdd1: pmx-power-hdd1 {
-				marvell,pins = "mpp9";
-				marvell,function = "gpio";
-			};
-			pmx_led_hdderr0: pmx-led-hdderr0 {
-				marvell,pins = "mpp34";
-				marvell,function = "gpio";
-			};
-			pmx_led_hdderr1: pmx-led-hdderr1 {
-				marvell,pins = "mpp35";
-				marvell,function = "gpio";
-			};
-			pmx_led_hdderr2: pmx-led-hdderr2 {
-				marvell,pins = "mpp24";
-				marvell,function = "gpio";
-			};
-			pmx_led_hdderr3: pmx-led-hdderr3 {
-				marvell,pins = "mpp25";
-				marvell,function = "gpio";
-			};
-		};
-
-		sata@80000 {
-			nr-ports = <2>;
-		};
-	};
-
-	gpio_leds {
-		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
-			     &pmx_led_info &pmx_led_power
-			     &pmx_led_function_blue
-			     &pmx_led_hdderr0
-			     &pmx_led_hdderr1
-			     &pmx_led_hdderr2
-			     &pmx_led_hdderr3>;
-
-		red-hdderr0-led {
-			label = "linkstation:red:hdderr0";
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		};
-
-		red-hdderr1-led {
-			label = "linkstation:red:hdderr1";
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-		};
-
-		red-hdderr2-led {
-			label = "linkstation:red:hdderr2";
-			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-		};
-
-		red-hdderr3-led {
-			label = "linkstation:red:hdderr3";
-			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	regulators {
-		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
-
-		hdd_power1: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "HDD1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts
deleted file mode 100644
index ff37e76ab551..000000000000
--- a/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Device Tree file for Buffalo Linkstation LS-VL
- *
- * Copyright (C) 2015, 2016
- * Roger Shimizu <rogershimizu@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "kirkwood-linkstation-6282.dtsi"
-
-/ {
-	model = "Buffalo Linkstation LS-VL";
-	compatible = "buffalo,lsvl", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-	memory { /* 256 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts
deleted file mode 100644
index f602c059c718..000000000000
--- a/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Device Tree file for Buffalo Linkstation LS-WSXL
- *
- * Copyright (C) 2015, 2016
- * Roger Shimizu <rogershimizu@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "kirkwood-linkstation-duo-6281.dtsi"
-
-/ {
-	model = "Buffalo Linkstation LS-WSXL";
-	compatible = "buffalo,lswsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory { /* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts
deleted file mode 100644
index ef8fc1a077f8..000000000000
--- a/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * Device Tree file for Buffalo Linkstation LS-WVL
- *
- * Copyright (C) 2015, 2016
- * Roger Shimizu <rogershimizu@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "kirkwood-linkstation-6282.dtsi"
-
-/ {
-	model = "Buffalo Linkstation LS-WVL";
-	compatible = "buffalo,lswvl","marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-	memory { /* 256 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_power_hdd1: pmx-power-hdd1 {
-				marvell,pins = "mpp9";
-				marvell,function = "gpio";
-			};
-			pmx_led_hdderr0: pmx-led-hdderr0 {
-				marvell,pins = "mpp34";
-				marvell,function = "gpio";
-			};
-			pmx_led_hdderr1: pmx-led-hdderr1 {
-				marvell,pins = "mpp35";
-				marvell,function = "gpio";
-			};
-		};
-
-		sata@80000 {
-			nr-ports = <2>;
-		};
-	};
-
-	gpio_leds {
-		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
-			     &pmx_led_info &pmx_led_power
-			     &pmx_led_function_blue
-			     &pmx_led_hdderr0
-			     &pmx_led_hdderr1>;
-
-		red-hdderr0-led {
-			label = "linkstation:red:hdderr0";
-			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		red-hdderr1-led {
-			label = "linkstation:red:hdderr1";
-			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators {
-		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
-
-		hdd_power1: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "HDD1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts
deleted file mode 100644
index ce41d553b693..000000000000
--- a/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Device Tree file for Buffalo Linkstation LS-WXL
- *
- * Copyright (C) 2015, 2016
- * Roger Shimizu <rogershimizu@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "kirkwood-linkstation-duo-6281.dtsi"
-
-/ {
-	model = "Buffalo Linkstation LS-WXL";
-	compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory { /* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_led_hdderr0: pmx-led-hdderr0 {
-				marvell,pins = "mpp8";
-				marvell,function = "gpio";
-			};
-			pmx_led_hdderr1: pmx-led-hdderr1 {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_fan_lock: pmx-fan-lock {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-			pmx_fan_high: pmx-fan-high {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-			pmx_fan_low: pmx-fan-low {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-		};
-	};
-
-	gpio_leds {
-		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
-			     &pmx_led_info &pmx_led_power
-			     &pmx_led_function_blue
-			     &pmx_led_hdderr0
-			     &pmx_led_hdderr1>;
-
-		red-hdderr0-led {
-			label = "linkstation:red:hdderr0";
-			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		red-hdderr1-led {
-			label = "linkstation:red:hdderr1";
-			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_fan {
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
-		pinctrl-names = "default";
-
-		gpios = <&gpio1 16 GPIO_ACTIVE_LOW
-			 &gpio1 15 GPIO_ACTIVE_LOW>;
-
-		gpio-fan,speed-map = <0 3
-				1500 2
-				3250 1
-				5000 0>;
-
-		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/kirkwood-linkstation.dtsi
deleted file mode 100644
index b459042a904a..000000000000
--- a/arch/arm/boot/dts/kirkwood-linkstation.dtsi
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * Device Tree common file for kirkwood based Buffalo Linkstation
- *
- * Copyright (C) 2015, 2016
- * Roger Shimizu <rogershimizu@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/ {
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_power_hdd0: pmx-power-hdd0 {
-				marvell,function = "gpio";
-			};
-			pmx_usb_vbus: pmx-usb-vbus {
-				marvell,function = "gpio";
-			};
-			pmx_led_alarm: pmx-led-alarm {
-				marvell,function = "gpio";
-			};
-			pmx_led_function_red: pmx-led-function-red {
-				marvell,function = "gpio";
-			};
-			pmx_led_function_blue: pmx-led-function-blue {
-				marvell,function = "gpio";
-			};
-			pmx_led_info: pmx-led-info {
-				marvell,function = "gpio";
-			};
-			pmx_led_power: pmx-led-power {
-				marvell,function = "gpio";
-			};
-			pmx_button_function: pmx-button-function {
-				marvell,function = "gpio";
-			};
-			pmx_power_switch: pmx-power-switch {
-				marvell,function = "gpio";
-			};
-			pmx_power_auto_switch: pmx-power-auto-switch {
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <1>;
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			m25p40@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "st,m25p40", "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <25000000>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0x60000>;
-					label = "uboot";
-					read-only;
-				};
-
-				partition@60000 {
-					reg = <0x60000 0x10000>;
-					label = "dtb";
-					read-only;
-				};
-
-				partition@70000 {
-					reg = <0x70000 0x10000>;
-					label = "uboot_env";
-				};
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_button_function &pmx_power_switch
-			     &pmx_power_auto_switch>;
-		pinctrl-names = "default";
-
-		function-button {
-			label = "Function Button";
-			linux,code = <KEY_OPTION>;
-		};
-
-		power-on-switch {
-			label = "Power-on Switch";
-			linux,code = <KEY_RESERVED>;
-			linux,input-type = <5>;
-		};
-
-		power-auto-switch {
-			label = "Power-auto Switch";
-			linux,code = <KEY_ESC>;
-			linux,input-type = <5>;
-		};
-	};
-
-	gpio_leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
-			     &pmx_led_info &pmx_led_power
-			     &pmx_led_function_blue>;
-		pinctrl-names = "default";
-	};
-
-	restart_poweroff {
-		compatible = "restart-poweroff";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_power_hdd0 &pmx_usb_vbus>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		hdd_power0: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "HDD0 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
-};
-
-&pciec {
-        status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
deleted file mode 100644
index 327023a477b8..000000000000
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * Marvell 88F6281 GTW GE Board
- *
- * Lennert Buytenhek <buytenh@marvell.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions that are common between the 6281
- * and 6282 variants of the Marvell Kirkwood Development Board.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Marvell 88F6281 GTW GE Board";
-	compatible = "marvell,mv88f6281gtw-ge", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pin-controller@10000 {
-			pmx_usb_led: pmx-usb-led {
-				marvell,pins = "mpp12";
-				marvell,function = "gpo";
-			};
-
-			pmx_leds: pmx-leds {
-				marvell,pins = "mpp20", "mpp21";
-				marvell,function = "gpio";
-			};
-
-			pmx_keys: pmx-keys {
-				marvell,pins = "mpp46", "mpp47";
-				marvell,function = "gpio";
-			};
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <50000000>;
-				mode = <0>;
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		ehci@50000 {
-			status = "okay";
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_leds &pmx_usb_led>;
-		pinctrl-names = "default";
-
-		green-status {
-			label = "gtw:green:Status";
-			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
-		};
-
-		red-status {
-			label = "gtw:red:Status";
-			gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
-		};
-
-		green-usb {
-			label = "gtw:green:USB";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_keys>;
-		pinctrl-names = "default";
-
-		restart {
-			label = "SWR Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-		wps {
-			label = "WPS Button";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	dsa {
-		status = "disabled";
-
-		compatible = "marvell,dsa";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dsa,ethernet = <&eth0port>;
-		dsa,mii-bus = <&mdio>;
-
-		switch@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0 0>;	/* MDIO address 0, switch 0 in tree */
-
-			port@0 {
-				reg = <0>;
-				label = "lan1";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan2";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan3";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan4";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "wan";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-			};
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	switch@0 {
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan1";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan2";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan3";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan4";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "wan";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-				ethernet = <&eth0port>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	ethernet0-port@0 {
-		speed = <1000>;
-		duplex = <1>;
-	};
-};
-
-&pciec {
-        status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/kirkwood-rd88f6192.dts
deleted file mode 100644
index b8af907249fb..000000000000
--- a/arch/arm/boot/dts/kirkwood-rd88f6192.dts
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Marvell RD88F6192 Board descrition
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions that are common between the three
- * variants of the Marvell Kirkwood Development Board.
- */
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6192.dtsi"
-
-/ {
-	model = "Marvell RD88F6192 reference design";
-	compatible = "marvell,rd88f6192", "marvell,kirkwood-88f6192", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_usb_power>;
-			pinctrl-names = "default";
-
-                        pmx_usb_power: pmx-usb-power {
-                                marvell,pins = "mpp10";
-                                marvell,function = "gpo";
-                        };
-		};
-
-		serial@12000 {
-			status = "okay";
-
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			m25p128@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "st,m25p128", "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <20000000>;
-				mode = <0>;
-			};
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	regulators {
-                compatible = "simple-bus";
-                #address-cells = <1>;
-                #size-cells = <0>;
-                pinctrl-0 = <&pmx_usb_power>;
-                pinctrl-names = "default";
-
-                usb_power: regulator@0 {
-                        compatible = "regulator-fixed";
-                        reg = <0>;
-                        regulator-name = "USB VBUS";
-                        regulator-min-microvolt = <5000000>;
-                        regulator-max-microvolt = <5000000>;
-                        enable-active-high;
-                        regulator-always-on;
-                        regulator-boot-on;
-                        gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-                };
-	};
-};
-
-&mdio {
-        status = "okay";
-
-        ethphy0: ethernet-phy@8 {
-                reg = <8>;
-        };
-};
-
-&eth0 {
-        status = "okay";
-        ethernet0-port@0 {
-                phy-handle = <&ethphy0>;
-        };
-};
-
-&pciec {
-        status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
deleted file mode 100644
index 6a4a65ec7944..000000000000
--- a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Marvell RD88F6181 Z0 stepping descrition
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions for the board using the Z0
- * stepping of the SoC. The ethernet switch has a "wan" port.
-*/
-
-/dts-v1/;
-
-#include "kirkwood-rd88f6281.dtsi"
-
-/ {
-	model = "Marvell RD88f6281 Reference design, with Z0 SoC";
-	compatible = "marvell,rd88f6281-z0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	dsa {
-		switch@0 {
-			reg = <0 0>;    /* MDIO address 0, switch 0 in tree */
-			port@4 {
-				reg = <4>;
-				label = "wan";
-			};
-		};
-	};
-};
-
-&eth1 {
-      status = "disabled";
-};
-
-&switch {
-	reg = <0>;
-
-	ports {
-		port@4 {
-			reg = <4>;
-			label = "wan";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
deleted file mode 100644
index 91f5da5dae5f..000000000000
--- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Marvell RD88F6181 Common Board descrition
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions that are common between the two
- * variants of the Marvell Kirkwood Development Board.
- */
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-names = "default";
-
-			pmx_sdio_cd: pmx-sdio-cd {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
-			pinctrl-names = "default";
-			status = "okay";
-			cd-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-			/* No WP GPIO */
-		};
-	};
-
-	dsa {
-		status = "disabled";
-
-		compatible = "marvell,dsa";
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		dsa,ethernet = <&eth0port>;
-		dsa,mii-bus = <&mdio>;
-
-		switch@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan1";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan2";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan3";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan4";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-			};
-		};
-       };
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x200000>;
-	};
-
-	partition@300000 {
-		label = "rootfs";
-		reg = <0x0300000 0x500000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	switch: switch@0 {
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan1";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan2";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan3";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan4";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-				ethernet = <&eth0port>;
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-		};
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		speed = <1000>;
-		duplex = <1>;
-	};
-};
-
-&pciec {
-        status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/kirkwood-ts419-6281.dts b/arch/arm/boot/dts/kirkwood-ts419-6281.dts
deleted file mode 100644
index aa22aa862857..000000000000
--- a/arch/arm/boot/dts/kirkwood-ts419-6281.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Device Tree file for QNAP TS41X with 6281 SoC
- *
- * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-ts219.dtsi"
-#include "kirkwood-ts419.dtsi"
-
-&ethphy0 { reg = <8>; };
-&ethphy1 { reg = <0>; };
diff --git a/arch/arm/boot/dts/kirkwood-ts419-6282.dts b/arch/arm/boot/dts/kirkwood-ts419-6282.dts
deleted file mode 100644
index e3e71f48acc8..000000000000
--- a/arch/arm/boot/dts/kirkwood-ts419-6282.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Device Tree file for QNAP TS41X with 6282 SoC
- *
- * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-ts219.dtsi"
-#include "kirkwood-ts419.dtsi"
-
-&ethphy0 { reg = <0>; };
-&ethphy1 { reg = <1>; };
-
-&pciec { status = "okay"; };
-&pcie1 { status = "okay"; };
diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
deleted file mode 100644
index 38faa90007d7..000000000000
--- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-#include "logicpd-som-lv.dtsi"
-#include "omap-gpmc-smsc9221.dtsi"
-
-/ {
-	model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
-	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_key_pins>;
-
-		sysboot2 {
-			label = "gpio3";
-			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;	/* gpio_111 / uP_GPIO_3 */
-			linux,code = <BTN_0>;
-			wakeup-source;
-		};
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "omap3logic";
-		ti,mcbsp = <&mcbsp2>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins &led_pins_wkup>;
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;	/* gpio133 */
-			linux,default-trigger = "cpu0";
-		};
-
-		led2 {
-			label = "led2";
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;	/* gpio11 */
-			linux,default-trigger = "none";
-		};
-	};
-};
-
-&vaux1 {
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-};
-
-&vaux4 {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-};
-
-&mcbsp2 {
-	status = "okay";
-};
-
-&charger {
-	ti,bb-uvolt = <3200000>;
-	ti,bb-uamp = <150>;
-};
-
-&gpmc {
-	ranges = <1 0 0x08000000 0x1000000>;	/* CS1: 16MB for LAN9221 */
-
-	ethernet@gpmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&lan9221_pins>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;		/* gpio_152 */
-		reg = <1 0 0xff>;
-	};
-};
-
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	status = "ok";
-	vdds_dsi-supply = <&vpll2>;
-	vdda_video-supply = <&video_reg>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins1>;
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <16>;
-		};
-	};
-};
-
-/ {
-	aliases {
-		display0 = &lcd0;
-	};
-
-	video_reg: video_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	lcd0: display@0 {
-		compatible = "panel-dpi";
-		label = "28";
-		status = "okay";
-		/* default-on; */
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_enable_pin>;
-		enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd INI */
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-
-		panel-timing {
-			clock-frequency = <9000000>;
-			hactive = <480>;
-			vactive = <272>;
-			hfront-porch = <3>;
-			hback-porch = <2>;
-			hsync-len = <42>;
-			vback-porch = <3>;
-			vfront-porch = <2>;
-			vsync-len = <11>;
-			hsync-active = <1>;
-			vsync-active = <1>;
-			de-active = <1>;
-			pixelclk-active = <0>;
-		};
-	};
-
-	bl: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&backlight_pins>;
-		pwms = <&twl_pwm 0 5000000>;
-		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-		default-brightness-level = <7>;
-		enable-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* gpio_8 */
-	};
-};
-
-&mmc1 {
-	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;		/* gpio_126 */
-	cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>;		/* gpio_110 */
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-	cap-power-off-card;
-};
-
-&omap3_pmx_core {
-	gpio_key_pins: pinmux_gpio_key_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_xclkb.gpio_111 / uP_GPIO_3*/
-		>;
-	};
-
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x215e, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* sdmmc2_dat1.gpio_133 / uP_GPIO_0 */
-		>;
-	};
-
-	lan9221_pins: pinmux_lan9221_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-			OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_strobe.gpio_126 */
-			OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_d11.gpio_110 */
-		>;
-	};
-
-	lcd_enable_pin: pinmux_lcd_enable_pin {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_fs.gpio_155 */
-		>;
-	};
-
-	dss_dpi_pins1: pinmux_dss_dpi_pins1 {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_acbias.dss_acbias */
-
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data5.dss_data5 */
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data15.dss_data15 */
-		>;
-	};
-};
-
-&omap3_pmx_wkup {
-	led_pins_wkup: pinmux_led_pins_wkup {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu0.gpio_11 / uP_GPIO_1 */
-		>;
-	};
-
-	backlight_pins: pinmux_backlight_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* sys_boot6.gpio_8 */
-		>;
-	};
-};
-
-
-&uart1 {
-	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
-};
-
-/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
-&usb_otg_hs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb_otg_pins>;
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
deleted file mode 100644
index 26cce4d18405..000000000000
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0>;
-	};
-
-	wl12xx_vmmc: wl12xx_vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio1 3 0>;   /* gpio_3 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-		vin-supply = <&vmmc2>;
-	};
-
-	/* HS USB Host PHY on PORT 1 */
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */
-	};
-};
-
-&gpmc {
-	ranges = <0 0 0x00000000 0x1000000>;	/* CS0: 16MB for NAND */
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name = "micron,mt29f4g16abbda3w";
-		nand-bus-width = <16>;
-		ti,nand-ecc-opt = "bch8";
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		gpmc,device-width = <2>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* u-boot uses mtdparts=omap2-nand.0:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs) */
-
-		x-loader@0 {
-			label = "x-loader";
-			reg = <0 0x80000>;
-		};
-
-		bootloaders@80000 {
-			label = "u-boot";
-			reg = <0x80000 0x1e0000>;
-		};
-
-		bootloaders_env@260000 {
-			label = "u-boot-env";
-			reg = <0x260000 0x20000>;
-		};
-
-		kernel@280000 {
-			label = "kernel";
-			reg = <0x280000 0x400000>;
-		};
-
-		filesystem@680000 {
-			label = "fs";
-			reg = <0x680000 0>;	/* 0 = MTDPART_SIZ_FULL */
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-};
-
-&mmc3 {
-	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
-	pinctrl-0 = <&mmc3_pins>;
-	pinctrl-names = "default";
-	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1273";
-		reg = <2>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
-		ref-clock-frequency = <26000000>;
-	};
-};
-
-&usbhshost {
-	port2-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy>;
-};
-
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_pins>;
-
-	mmc3_pins: pinmux_mm3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat4.sdmmc3_dat0 */
-			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat5.sdmmc3_dat1 */
-			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat2 */
-			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat3 */
-			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 */
-			OMAP3_CORE1_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
-			OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */
-			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs2.sdmmc_clk */
-		>;
-	};
-	mcbsp2_pins: pinmux_mcbsp2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)        /* mcbsp2_fsx */
-			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)        /* mcbsp2_clkx */
-			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)        /* mcbsp2_dr */
-			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)       /* mcbsp2_dx */
-		>;
-	};
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
-			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
-			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)	/* uart2_tx.uart2_tx */
-			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)	/* uart2_rx.uart2_rx */
-			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* GPIO_162,BT_EN */
-		>;
-	};
-	mcspi1_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)        /* mcspi1_clk.mcspi1_clk */
-			OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_simo.mcspi1_simo */
-			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
-			OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_cs0.mcspi1_cs0 */
-		>;
-	};
-
-	hsusb2_pins: pinmux_hsusb2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi1_cs3.hsusb2_data2 */
-			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_clk.hsusb2_data7 */
-			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_simo.hsusb2_data4 */
-			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_somi.hsusb2_data5 */
-			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_cs0.hsusb2_data6 */
-			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_cs1.hsusb2_data3 */
-		>;
-	};
-
-	hsusb_otg_pins: pinmux_hsusb_otg_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
-			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
-			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
-			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
-			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
-			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
-			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
-			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
-			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
-			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
-			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
-			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
-		>;
-	};
-
-
-};
-
-&omap3_pmx_wkup {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_reset_pin>;
-	hsusb2_reset_pin: pinmux_hsusb1_reset_pin {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4)	/* sys_boot2.gpio_4 */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_2_pins>;
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
-			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
-		>;
-	};
-};
-
-&uart2 {
-	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&mcspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&twl {
-	twl_power: power {
-		compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
-		ti,use_poweroff;
-	};
-};
-
-&twl_gpio {
-	ti,use-leds;
-};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
deleted file mode 100644
index 43e9364083de..000000000000
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
+++ /dev/null
@@ -1,404 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-#include "logicpd-torpedo-som.dtsi"
-#include "omap-gpmc-smsc9221.dtsi"
-
-/ {
-	model = "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit";
-	compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3";
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>;
-
-		sysboot2 {
-			label = "sysboot2";
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;	/* gpio2 */
-			linux,code = <BTN_0>;
-			wakeup-source;
-		};
-
-		sysboot5 {
-			label = "sysboot5";
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;	/* gpio7 */
-			linux,code = <BTN_1>;
-			wakeup-source;
-		};
-
-		gpio1 {
-			label = "gpio1";
-			gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;	/* gpio181 */
-			linux,code = <BTN_2>;
-			wakeup-source;
-		};
-
-		gpio2 {
-			label = "gpio2";
-			gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;	/* gpio178 */
-			linux,code = <BTN_3>;
-			wakeup-source;
-		};
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "omap3logic";
-		ti,mcbsp = <&mcbsp2>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;	/* gpio180 */
-			linux,default-trigger = "cpu0";
-		};
-
-		led2 {
-			label = "led2";
-			gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;	/* gpio179 */
-			linux,default-trigger = "none";
-		};
-	};
-
-	pwm10: dmtimer-pwm {
-		compatible = "ti,omap-dmtimer-pwm";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwm_pins>;
-		ti,timers = <&timer10>;
-		#pwm-cells = <3>;
-	};
-
-};
-
-&vaux1 {
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-};
-
-&vaux4 {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-};
-
-&mcbsp2 {
-	status = "okay";
-};
-
-&charger {
-	ti,bb-uvolt = <3200000>;
-	ti,bb-uamp = <150>;
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x1000000	/* CS0: 16MB for NAND */
-		  1 0 0x2c000000 0x1000000>;	/* CS1: 16MB for LAN9221 */
-
-	ethernet@gpmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&lan9221_pins>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;		/* gpio129 */
-		reg = <1 0 0xff>;
-	};
-};
-
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	status = "ok";
-	vdds_dsi-supply = <&vpll2>;
-	vdda_video-supply = <&video_reg>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins1>;
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <16>;
-		};
-	};
-};
-
-/ {
-	aliases {
-		display0 = &lcd0;
-	};
-
-	video_reg: video_reg {
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_pwr_pins>;
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd INI */
-	};
-
-	lcd0: display {
-		compatible = "panel-dpi";
-		label = "15";
-		status = "okay";
-		/* default-on; */
-		pinctrl-names = "default";
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-
-		panel-timing {
-			clock-frequency = <9000000>;
-			hactive = <480>;
-			vactive = <272>;
-			hfront-porch = <3>;
-			hback-porch = <2>;
-			hsync-len = <42>;
-			vback-porch = <3>;
-			vfront-porch = <4>;
-			vsync-len = <11>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-	};
-
-	bl: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&backlight_pins>;
-		pwms = <&pwm10 0 5000000 0>;
-		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-		default-brightness-level = <7>;
-		enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */
-	};
-};
-
-&mmc1 {
-	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins &mmc1_cd>;
-	cd-gpios = <&gpio4 31 IRQ_TYPE_LEVEL_LOW>;		/* gpio127 */
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-	cap-power-off-card;
-};
-
-&omap3_pmx_core {
-	gpio_key_pins: pinmux_gpio_key_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcspi2_clk.gpio_178 */
-			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcspi2_cs0.gpio_181 */
-		>;
-	};
-
-	pwm_pins: pinmux_pwm_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3)       /* gpmc_ncs5.gpt_10_pwm_evt */
-		>;
-	};
-
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4)	/* gpio_179 */
-			OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4)	/* gpio_180 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	tsc2004_pins: pinmux_tsc2004_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4)	/* mcbsp4_dr.gpio_153 */
-		>;
-	};
-
-	backlight_pins: pinmux_backlight_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_dx.gpio_154 */
-		>;
-	};
-
-	isp_pins: pinmux_isp_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0)   /* cam_hs.cam_hs */
-			OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0)   /* cam_vs.cam_vs */
-			OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0)   /* cam_xclka.cam_xclka */
-			OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0)   /* cam_pclk.cam_pclk */
-
-			OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0)   /* cam_d0.cam_d0 */
-			OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0)   /* cam_d1.cam_d1 */
-			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0)   /* cam_d2.cam_d2 */
-			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0)   /* cam_d3.cam_d3 */
-			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0)   /* cam_d4.cam_d4 */
-			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0)   /* cam_d5.cam_d5 */
-			OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0)   /* cam_d6.cam_d6 */
-			OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0)   /* cam_d7.cam_d7 */
-		>;
-	};
-
-	panel_pwr_pins: pinmux_panel_pwr_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_fs.gpio_155 */
-		>;
-	};
-
-	dss_dpi_pins1: pinmux_dss_dpi_pins1 {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_acbias.dss_acbias */
-
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data17.dss_data17 */
-
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data18.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data19.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data20.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data21.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data22.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data23.dss_data5 */
-		>;
-	};
-};
-
-&omap3_pmx_wkup {
-	gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_boot0.gpio_2 */
-			OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_boot5.gpio_7 */
-		>;
-	};
-
-	lan9221_pins: pinmux_lan9221_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4)		/* reserved.gpio_129 */
-		>;
-	};
-
-	mmc1_cd: pinmux_mmc1_cd {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4)	/* reserved.gpio_127 */
-		>;
-	};
-};
-
-&i2c2 {
-	mt9p031@48 {
-		compatible = "aptina,mt9p031";
-		reg = <0x48>;
-		clocks = <&isp 0>;
-		vaa-supply = <&vaux4>;
-		vdd-supply = <&vaux4>;
-		vdd_io-supply = <&vaux4>;
-		port {
-			mt9p031_out: endpoint {
-				input-clock-frequency = <24000000>;
-				pixel-clock-frequency = <72000000>;
-				remote-endpoint = <&ccdc_ep>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	touchscreen: tsc2004@48 {
-		compatible = "ti,tsc2004";
-		reg = <0x48>;
-		vio-supply = <&vaux1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tsc2004_pins>;
-		interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */
-
-		touchscreen-fuzz-x = <4>;
-		touchscreen-fuzz-y = <7>;
-		touchscreen-fuzz-pressure = <2>;
-		touchscreen-size-x = <4096>;
-		touchscreen-size-y = <4096>;
-		touchscreen-max-pressure = <2048>;
-
-		ti,x-plate-ohms = <280>;
-		ti,esd-recovery-timeout-ms = <8000>;
-	};
-};
-
-&mcspi1 {
-	at25@0 {
-		compatible = "atmel,at25";
-		reg = <0>;
-		spi-max-frequency = <5000000>;
-		spi-cpha;
-		spi-cpol;
-
-		pagesize = <64>;
-		size = <32768>;
-		address-width = <16>;
-	};
-};
-
-&isp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&isp_pins>;
-	ports {
-		port@0 {
-			reg = <0>;
-			ccdc_ep: endpoint {
-				remote-endpoint = <&mt9p031_out>;
-				bus-width = <8>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-				pclk-sample = <0>;
-			};
-		};
-	};
-};
-
-&uart1 {
-	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
-};
-
-/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
-&usb_otg_hs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb_otg_pins>;
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
deleted file mode 100644
index 6d89736c7b44..000000000000
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		user0 {
-			label = "user0";
-			gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* LEDA */
-			linux,default-trigger = "none";
-		};
-	};
-
-	wl12xx_vmmc: wl12xx_vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio5 29 0>;   /* gpio157 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-		vin-supply = <&vmmc2>;
-	};
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x1000000>;	/* CS0: 16MB for NAND */
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name = "micron,mt29f4g16abbda3w";
-		nand-bus-width = <16>;
-		ti,nand-ecc-opt = "bch8";
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		gpmc,device-width = <2>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* u-boot uses mtdparts=omap2-nand.0:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs) */
-
-		x-loader@0 {
-			label = "x-loader";
-			reg = <0 0x80000>;
-		};
-
-		bootloaders@80000 {
-			label = "u-boot";
-			reg = <0x80000 0x1e0000>;
-		};
-
-		bootloaders_env@260000 {
-			label = "u-boot-env";
-			reg = <0x260000 0x20000>;
-		};
-
-		kernel@280000 {
-			label = "kernel";
-			reg = <0x280000 0x400000>;
-		};
-
-		filesystem@680000 {
-			label = "fs";
-			reg = <0x680000 0>;	/* 0 = MTDPART_SIZ_FULL */
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-	at24@50 {
-		compatible = "atmel,24c64";
-		readonly;
-		reg = <0x50>;
-	};
-};
-
-/*
- * Only found on the wireless SOM. For the SOM without wireless, the pins for
- * MMC3 can be routed with jumpers to the second MMC slot on the devkit and
- * gpio157 is not connected. So this should be OK to keep common for now,
- * probably device tree overlays is the way to go with the various SOM and
- * jumpering combinations for the long run.
- */
-&mmc3 {
-	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
-	pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>;
-	pinctrl-names = "default";
-	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1283";
-		reg = <2>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
-		ref-clock-frequency = <26000000>;
-		tcxo-clock-frequency = <26000000>;
-	};
-};
-
-&omap3_pmx_core {
-	mmc3_pins: pinmux_mm3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat4.sdmmc3_dat0 */
-			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat5.sdmmc3_dat1 */
-			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat2 */
-			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat3 */
-			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 */
-			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)	/* mcbsp1_fsr.gpio_157 */
-		>;
-	};
-	mcbsp2_pins: pinmux_mcbsp2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)        /* mcbsp2_fsx */
-			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)        /* mcbsp2_clkx */
-			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)        /* mcbsp2_dr */
-			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)       /* mcbsp2_dx */
-		>;
-	};
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
-			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
-			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)	/* uart2_tx.uart2_tx */
-			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)	/* uart2_rx.uart2_rx */
-			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* GPIO_162,BT_EN */
-		>;
-	};
-	mcspi1_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)        /* mcspi1_clk.mcspi1_clk */
-			OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_simo.mcspi1_simo */
-			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
-			OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_cs0.mcspi1_cs0 */
-		>;
-	};
-	hsusb_otg_pins: pinmux_hsusb_otg_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
-			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
-			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
-			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
-
-			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
-			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
-			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
-			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
-			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
-			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
-			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
-			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
-		>;
-	};
-};
-
-&uart2 {
-	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&mcspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
-};
-
-&omap3_pmx_core2 {
-	mmc3_core2_pins: pinmux_mmc3_core2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)   /* etk_clk.sdmmc3_clk */
-			OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2)   /* etk_ctl.sdmmc3_cmd */
-		>;
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&twl {
-	twl_power: power {
-		compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
-		ti,use_poweroff;
-	};
-};
-
-&twl_gpio {
-	ti,use-leds;
-};
diff --git a/arch/arm/boot/dts/lpc3250-phy3250.dts b/arch/arm/boot/dts/lpc3250-phy3250.dts
deleted file mode 100644
index fd95e2b10357..000000000000
--- a/arch/arm/boot/dts/lpc3250-phy3250.dts
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * PHYTEC phyCORE-LPC3250 board
- *
- * Copyright 2012 Roland Stigge <stigge@antcom.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "lpc32xx.dtsi"
-
-/ {
-	model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250";
-	compatible = "phytec,phy3250", "nxp,lpc3250";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x4000000>;
-	};
-
-	regulators {
-		backlight_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			regulator-name = "backlight_reg";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			gpio = <&gpio 5 4 0>;
-			enable-active-high;
-			regulator-boot-on;
-		};
-
-		lcd_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "lcd_reg";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			gpio = <&gpio 5 0 0>;
-			enable-active-high;
-			regulator-boot-on;
-		};
-
-		sd_reg: regulator@2 {
-			compatible = "regulator-fixed";
-			regulator-name = "sd_reg";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			gpio = <&gpio 5 5 0>;
-			enable-active-high;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led0 { /* red */
-			gpios = <&gpio 5 1 0>; /* GPO_P3 1, GPIO 80, active high */
-			default-state = "off";
-		};
-
-		led1 { /* green */
-			gpios = <&gpio 5 14 0>; /* GPO_P3 14, GPIO 93, active high */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&clcd {
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-
-	uda1380: uda1380@18 {
-		compatible = "nxp,uda1380";
-		reg = <0x18>;
-		power-gpio = <&gpio 0x59 0>;
-		reset-gpio = <&gpio 0x51 0>;
-		dac-clk = "wspll";
-	};
-
-	pcf8563: rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-};
-
-&i2cusb {
-	clock-frequency = <100000>;
-
-	isp1301: usb-transceiver@2c {
-		compatible = "nxp,isp1301";
-		reg = <0x2c>;
-	};
-};
-
-&key {
-	keypad,num-rows = <1>;
-	keypad,num-columns = <1>;
-	nxp,debounce-delay-ms = <3>;
-	nxp,scan-delay-ms = <34>;
-	linux,keymap = <0x00000002>;
-	status = "okay";
-};
-
-&mac {
-	phy-mode = "rmii";
-	use-iram;
-};
-
-/* Here, choose exactly one from: ohci, usbd */
-&ohci /* &usbd */ {
-	transceiver = <&isp1301>;
-	status = "okay";
-};
-
-&sd {
-	wp-gpios = <&gpio 3 0 0>;
-	cd-gpios = <&gpio 3 1 0>;
-	cd-inverted;
-	bus-width = <4>;
-	vmmc-supply = <&sd_reg>;
-	status = "okay";
-};
-
-/* 64MB Flash via SLC NAND controller */
-&slc {
-	status = "okay";
-
-	nxp,wdr-clks = <14>;
-	nxp,wwidth = <40000000>;
-	nxp,whold = <100000000>;
-	nxp,wsetup = <100000000>;
-	nxp,rdr-clks = <14>;
-	nxp,rwidth = <40000000>;
-	nxp,rhold = <66666666>;
-	nxp,rsetup = <100000000>;
-	nand-on-flash-bbt;
-	gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
-
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		mtd0@00000000 {
-			label = "phy3250-boot";
-			reg = <0x00000000 0x00064000>;
-			read-only;
-		};
-
-		mtd1@00064000 {
-			label = "phy3250-uboot";
-			reg = <0x00064000 0x00190000>;
-			read-only;
-		};
-
-		mtd2@001f4000 {
-			label = "phy3250-ubt-prms";
-			reg = <0x001f4000 0x00010000>;
-		};
-
-		mtd3@00204000 {
-			label = "phy3250-kernel";
-			reg = <0x00204000 0x00400000>;
-		};
-
-		mtd4@00604000 {
-			label = "phy3250-rootfs";
-			reg = <0x00604000 0x039fc000>;
-		};
-	};
-};
-
-&ssp0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	num-cs = <1>;
-	cs-gpios = <&gpio 3 5 0>;
-	status = "okay";
-
-	eeprom: at25@0 {
-		compatible = "atmel,at25";
-		reg = <0>;
-		spi-max-frequency = <5000000>;
-
-		pl022,interface = <0>;
-		pl022,com-mode = <0>;
-		pl022,rx-level-trig = <1>;
-		pl022,tx-level-trig = <1>;
-		pl022,ctrl-len = <11>;
-		pl022,wait-state = <0>;
-		pl022,duplex = <0>;
-
-		at25,byte-len = <0x8000>;
-		at25,addr-mode = <2>;
-		at25,page-size = <64>;
-	};
-};
-
-&tsc {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
deleted file mode 100644
index 940875316d0f..000000000000
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ /dev/null
@@ -1,333 +0,0 @@
-/*
- * Copyright 2013-2014 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "ls1021a.dtsi"
-
-/ {
-	model = "LS1021A QDS Board";
-
-	aliases {
-		enet0_rgmii_phy = &rgmii_phy1;
-		enet1_rgmii_phy = &rgmii_phy2;
-		enet2_rgmii_phy = &rgmii_phy3;
-		enet0_sgmii_phy = &sgmii_phy1c;
-		enet1_sgmii_phy = &sgmii_phy1d;
-	};
-
-	sys_mclk: clock-mclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,widgets =
-			"Microphone", "Microphone Jack",
-			"Headphone", "Headphone Jack",
-			"Speaker", "Speaker Ext",
-			"Line", "Line In Jack";
-		simple-audio-card,routing =
-			"MIC_IN", "Microphone Jack",
-			"Microphone Jack", "Mic Bias",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"Speaker Ext", "LINE_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&sai2>;
-			frame-master;
-			bitclock-master;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&codec>;
-			frame-master;
-			bitclock-master;
-		};
-	};
-};
-
-&dspi0 {
-	bus-num = <0>;
-	status = "okay";
-
-	dspiflash: at45db021d@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash";
-		spi-max-frequency = <16000000>;
-		spi-cpol;
-		spi-cpha;
-		reg = <0>;
-	};
-};
-
-&enet0 {
-	tbi-handle = <&tbi0>;
-	phy-handle = <&sgmii_phy1c>;
-	phy-connection-type = "sgmii";
-	status = "okay";
-};
-
-&enet1 {
-	tbi-handle = <&tbi0>;
-	phy-handle = <&sgmii_phy1d>;
-	phy-connection-type = "sgmii";
-	status = "okay";
-};
-
-&enet2 {
-	phy-handle = <&rgmii_phy3>;
-	phy-connection-type = "rgmii-id";
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	pca9547: mux@77 {
-		compatible = "nxp,pca9547";
-		reg = <0x77>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0>;
-
-			ds3232: rtc@68 {
-				compatible = "dallas,ds3232";
-				reg = <0x68>;
-				interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x2>;
-
-			ina220@40 {
-				compatible = "ti,ina220";
-				reg = <0x40>;
-				shunt-resistor = <1000>;
-			};
-
-			ina220@41 {
-				compatible = "ti,ina220";
-				reg = <0x41>;
-				shunt-resistor = <1000>;
-			};
-		};
-
-		i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x3>;
-
-			eeprom@56 {
-				compatible = "atmel,24c512";
-				reg = <0x56>;
-			};
-
-			eeprom@57 {
-				compatible = "atmel,24c512";
-				reg = <0x57>;
-			};
-
-			adt7461a@4c {
-				compatible = "adi,adt7461a";
-				reg = <0x4c>;
-			};
-		};
-
-		i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x4>;
-
-			codec: sgtl5000@2a {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,sgtl5000";
-				reg = <0x2a>;
-				VDDA-supply = <&reg_3p3v>;
-				VDDIO-supply = <&reg_3p3v>;
-				clocks = <&sys_mclk 1>;
-			};
-		};
-	};
-};
-
-&ifc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	/* NOR, NAND Flashes and FPGA on board */
-	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
-		  0x2 0x0 0x0 0x7e800000 0x00010000
-		  0x3 0x0 0x0 0x7fb00000 0x00000100>;
-	status = "okay";
-
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x8000000>;
-		bank-width = <2>;
-		device-width = <1>;
-	};
-
-	fpga: board-control@3,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		reg = <0x3 0x0 0x0000100>;
-		bank-width = <1>;
-		device-width = <1>;
-		ranges = <0 3 0 0x100>;
-
-		mdio-mux-emi1 {
-			compatible = "mdio-mux-mmioreg";
-			mdio-parent-bus = <&mdio0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x54 1>; /* BRDCFG4 */
-			mux-mask = <0xe0>; /* EMI1[2:0] */
-
-			/* Onboard PHYs */
-			ls1021amdio0: mdio@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				rgmii_phy1: ethernet-phy@1 {
-					reg = <0x1>;
-				};
-			};
-
-			ls1021amdio1: mdio@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				rgmii_phy2: ethernet-phy@2 {
-					reg = <0x2>;
-				};
-			};
-
-			ls1021amdio2: mdio@40 {
-				reg = <0x40>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				rgmii_phy3: ethernet-phy@3 {
-					reg = <0x3>;
-				};
-			};
-
-			ls1021amdio3: mdio@60 {
-				reg = <0x60>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				sgmii_phy1c: ethernet-phy@1c {
-					reg = <0x1c>;
-				};
-			};
-
-			ls1021amdio4: mdio@80 {
-				reg = <0x80>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				sgmii_phy1d: ethernet-phy@1d {
-					reg = <0x1d>;
-				};
-			};
-		};
-	};
-};
-
-&lpuart0 {
-	status = "okay";
-};
-
-&mdio0 {
-	tbi0: tbi-phy@8 {
-		reg = <0x8>;
-		device_type = "tbi-phy";
-	};
-};
-
-&sai2 {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
deleted file mode 100644
index a8b148ad1dd2..000000000000
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * Copyright 2013-2014 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "ls1021a.dtsi"
-
-/ {
-	model = "LS1021A TWR Board";
-
-	aliases {
-		enet2_rgmii_phy = &rgmii_phy1;
-		enet0_sgmii_phy = &sgmii_phy2;
-		enet1_sgmii_phy = &sgmii_phy0;
-	};
-
-	sys_mclk: clock-mclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,widgets =
-			"Microphone", "Microphone Jack",
-			"Headphone", "Headphone Jack",
-			"Speaker", "Speaker Ext",
-			"Line", "Line In Jack";
-		simple-audio-card,routing =
-			"MIC_IN", "Microphone Jack",
-			"Microphone Jack", "Mic Bias",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"Speaker Ext", "LINE_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&sai1>;
-			frame-master;
-			bitclock-master;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&codec>;
-			frame-master;
-			bitclock-master;
-		};
-	};
-
-	panel: panel {
-		compatible = "nec,nl4827hc19-05b";
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&dcu_out>;
-			};
-		};
-	};
-};
-
-&dcu {
-	status = "okay";
-
-	port {
-		dcu_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&dspi1 {
-	bus-num = <0>;
-	status = "okay";
-
-	dspiflash: s25fl064k@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl064k";
-		spi-max-frequency = <16000000>;
-		spi-cpol;
-		spi-cpha;
-		reg = <0>;
-	};
-};
-
-&enet0 {
-	tbi-handle = <&tbi1>;
-	phy-handle = <&sgmii_phy2>;
-	phy-connection-type = "sgmii";
-	status = "okay";
-};
-
-&enet1 {
-	tbi-handle = <&tbi1>;
-	phy-handle = <&sgmii_phy0>;
-	phy-connection-type = "sgmii";
-	status = "okay";
-};
-
-&enet2 {
-	phy-handle = <&rgmii_phy1>;
-	phy-connection-type = "rgmii-id";
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	ina220@40 {
-		compatible = "ti,ina220";
-		reg = <0x40>;
-		shunt-resistor = <1000>;
-	};
-
-	ina220@41 {
-		compatible = "ti,ina220";
-		reg = <0x41>;
-		shunt-resistor = <1000>;
-	};
-
-};
-
-&i2c1 {
-	status = "okay";
-	codec: sgtl5000@a {
-		#sound-dai-cells = <0>;
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-		clocks = <&sys_mclk 1>;
-	};
-};
-
-&ifc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	/* NOR Flash on board */
-	ranges = <0x0 0x0 0x0 0x60000000 0x08000000>;
-	status = "okay";
-
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x8000000>;
-		bank-width = <2>;
-		device-width = <1>;
-	};
-};
-
-&lpuart0 {
-	status = "okay";
-};
-
-&mdio0 {
-	sgmii_phy0: ethernet-phy@0 {
-		reg = <0x0>;
-	};
-	rgmii_phy1: ethernet-phy@1 {
-		reg = <0x1>;
-	};
-	sgmii_phy2: ethernet-phy@2 {
-		reg = <0x2>;
-	};
-	tbi1: tbi-phy@1f {
-		reg = <0x1f>;
-		device_type = "tbi-phy";
-	};
-};
-
-&sai1 {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
deleted file mode 100644
index 7bb9df2c1460..000000000000
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ /dev/null
@@ -1,734 +0,0 @@
-/*
- * Copyright 2013-2014 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "skeleton64.dtsi"
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
-	compatible = "fsl,ls1021a";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		crypto = &crypto;
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		serial0 = &lpuart0;
-		serial1 = &lpuart1;
-		serial2 = &lpuart2;
-		serial3 = &lpuart3;
-		serial4 = &lpuart4;
-		serial5 = &lpuart5;
-		sysclk = &sysclk;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@f00 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0xf00>;
-			clocks = <&clockgen 1 0>;
-			#cooling-cells = <2>;
-		};
-
-		cpu1: cpu@f01 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0xf01>;
-			clocks = <&clockgen 1 0>;
-		};
-	};
-
-	sysclk: sysclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-		clock-output-names = "sysclk";
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		device_type = "soc";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		gic: interrupt-controller@1400000 {
-			compatible = "arm,gic-400", "arm,cortex-a7-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x0 0x1401000 0x0 0x1000>,
-			      <0x0 0x1402000 0x0 0x2000>,
-			      <0x0 0x1404000 0x0 0x2000>,
-			      <0x0 0x1406000 0x0 0x2000>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-
-		};
-
-		msi1: msi-controller@1570e00 {
-			compatible = "fsl,1s1021a-msi";
-			reg = <0x0 0x1570e00 0x0 0x8>;
-			msi-controller;
-			interrupts =  <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		msi2: msi-controller@1570e08 {
-			compatible = "fsl,1s1021a-msi";
-			reg = <0x0 0x1570e08 0x0 0x8>;
-			msi-controller;
-			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		ifc: ifc@1530000 {
-			compatible = "fsl,ifc", "simple-bus";
-			reg = <0x0 0x1530000 0x0 0x10000>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		dcfg: dcfg@1ee0000 {
-			compatible = "fsl,ls1021a-dcfg", "syscon";
-			reg = <0x0 0x1ee0000 0x0 0x10000>;
-			big-endian;
-		};
-
-		esdhc: esdhc@1560000 {
-			compatible = "fsl,esdhc";
-			reg = <0x0 0x1560000 0x0 0x10000>;
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <0>;
-			voltage-ranges = <1800 1800 3300 3300>;
-			sdhci,auto-cmd12;
-			big-endian;
-			bus-width = <4>;
-			status = "disabled";
-		};
-
-		sata: sata@3200000 {
-			compatible = "fsl,ls1021a-ahci";
-			reg = <0x0 0x3200000 0x0 0x10000>,
-			      <0x0 0x20220520 0x0 0x4>;
-			reg-names = "ahci", "sata-ecc";
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
-			dma-coherent;
-			status = "disabled";
-		};
-
-		scfg: scfg@1570000 {
-			compatible = "fsl,ls1021a-scfg", "syscon";
-			reg = <0x0 0x1570000 0x0 0x10000>;
-			big-endian;
-		};
-
-		crypto: crypto@1700000 {
-			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
-			fsl,sec-era = <7>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg		 = <0x0 0x1700000 0x0 0x100000>;
-			ranges		 = <0x0 0x0 0x1700000 0x100000>;
-			interrupts	 = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-
-			sec_jr0: jr@10000 {
-				compatible = "fsl,sec-v5.0-job-ring",
-				     "fsl,sec-v4.0-job-ring";
-				reg = <0x10000 0x10000>;
-				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			sec_jr1: jr@20000 {
-				compatible = "fsl,sec-v5.0-job-ring",
-				     "fsl,sec-v4.0-job-ring";
-				reg = <0x20000 0x10000>;
-				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			sec_jr2: jr@30000 {
-				compatible = "fsl,sec-v5.0-job-ring",
-				     "fsl,sec-v4.0-job-ring";
-				reg = <0x30000 0x10000>;
-				interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			sec_jr3: jr@40000 {
-				compatible = "fsl,sec-v5.0-job-ring",
-				     "fsl,sec-v4.0-job-ring";
-				reg = <0x40000 0x10000>;
-				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-		};
-
-		clockgen: clocking@1ee1000 {
-			compatible = "fsl,ls1021a-clockgen";
-			reg = <0x0 0x1ee1000 0x0 0x1000>;
-			#clock-cells = <2>;
-			clocks = <&sysclk>;
-		};
-
-		tmu: tmu@1f00000 {
-			compatible = "fsl,qoriq-tmu";
-			reg = <0x0 0x1f00000 0x0 0x10000>;
-			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>;
-			fsl,tmu-calibration = <0x00000000 0x0000000f
-					       0x00000001 0x00000017
-					       0x00000002 0x0000001e
-					       0x00000003 0x00000026
-					       0x00000004 0x0000002e
-					       0x00000005 0x00000035
-					       0x00000006 0x0000003d
-					       0x00000007 0x00000044
-					       0x00000008 0x0000004c
-					       0x00000009 0x00000053
-					       0x0000000a 0x0000005b
-					       0x0000000b 0x00000064
-
-					       0x00010000 0x00000011
-					       0x00010001 0x0000001c
-					       0x00010002 0x00000024
-					       0x00010003 0x0000002b
-					       0x00010004 0x00000034
-					       0x00010005 0x00000039
-					       0x00010006 0x00000042
-					       0x00010007 0x0000004c
-					       0x00010008 0x00000051
-					       0x00010009 0x0000005a
-					       0x0001000a 0x00000063
-
-					       0x00020000 0x00000013
-					       0x00020001 0x00000019
-					       0x00020002 0x00000024
-					       0x00020003 0x0000002c
-					       0x00020004 0x00000035
-					       0x00020005 0x0000003d
-					       0x00020006 0x00000046
-					       0x00020007 0x00000050
-					       0x00020008 0x00000059
-
-					       0x00030000 0x00000002
-					       0x00030001 0x0000000d
-					       0x00030002 0x00000019
-					       0x00030003 0x00000024>;
-			#thermal-sensor-cells = <1>;
-		};
-
-		thermal-zones {
-			cpu_thermal: cpu-thermal {
-				polling-delay-passive = <1000>;
-				polling-delay = <5000>;
-
-				thermal-sensors = <&tmu 0>;
-
-				trips {
-					cpu_alert: cpu-alert {
-						temperature = <85000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-					cpu_crit: cpu-crit {
-						temperature = <95000>;
-						hysteresis = <2000>;
-						type = "critical";
-					};
-				};
-
-				cooling-maps {
-					map0 {
-						trip = <&cpu_alert>;
-						cooling-device =
-							<&cpu0 THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>;
-					};
-				};
-			};
-		};
-
-		dspi0: dspi@2100000 {
-			compatible = "fsl,ls1021a-v1.0-dspi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0 0x2100000 0x0 0x10000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "dspi";
-			clocks = <&clockgen 4 1>;
-			spi-num-chipselects = <6>;
-			big-endian;
-			status = "disabled";
-		};
-
-		dspi1: dspi@2110000 {
-			compatible = "fsl,ls1021a-v1.0-dspi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0 0x2110000 0x0 0x10000>;
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "dspi";
-			clocks = <&clockgen 4 1>;
-			spi-num-chipselects = <6>;
-			big-endian;
-			status = "disabled";
-		};
-
-		i2c0: i2c@2180000 {
-			compatible = "fsl,vf610-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0 0x2180000 0x0 0x10000>;
-			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
-			clocks = <&clockgen 4 1>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@2190000 {
-			compatible = "fsl,vf610-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0 0x2190000 0x0 0x10000>;
-			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
-			clocks = <&clockgen 4 1>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@21a0000 {
-			compatible = "fsl,vf610-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0 0x21a0000 0x0 0x10000>;
-			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
-			clocks = <&clockgen 4 1>;
-			status = "disabled";
-		};
-
-		uart0: serial@21c0500 {
-			compatible = "fsl,16550-FIFO64", "ns16550a";
-			reg = <0x0 0x21c0500 0x0 0x100>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <0>;
-			fifo-size = <15>;
-			status = "disabled";
-		};
-
-		uart1: serial@21c0600 {
-			compatible = "fsl,16550-FIFO64", "ns16550a";
-			reg = <0x0 0x21c0600 0x0 0x100>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <0>;
-			fifo-size = <15>;
-			status = "disabled";
-		};
-
-		uart2: serial@21d0500 {
-			compatible = "fsl,16550-FIFO64", "ns16550a";
-			reg = <0x0 0x21d0500 0x0 0x100>;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <0>;
-			fifo-size = <15>;
-			status = "disabled";
-		};
-
-		uart3: serial@21d0600 {
-			compatible = "fsl,16550-FIFO64", "ns16550a";
-			reg = <0x0 0x21d0600 0x0 0x100>;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <0>;
-			fifo-size = <15>;
-			status = "disabled";
-		};
-
-		gpio0: gpio@2300000 {
-			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
-			reg = <0x0 0x2300000 0x0 0x10000>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio1: gpio@2310000 {
-			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
-			reg = <0x0 0x2310000 0x0 0x10000>;
-			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio2: gpio@2320000 {
-			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
-			reg = <0x0 0x2320000 0x0 0x10000>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio3: gpio@2330000 {
-			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
-			reg = <0x0 0x2330000 0x0 0x10000>;
-			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		lpuart0: serial@2950000 {
-			compatible = "fsl,ls1021a-lpuart";
-			reg = <0x0 0x2950000 0x0 0x1000>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&sysclk>;
-			clock-names = "ipg";
-			status = "disabled";
-		};
-
-		lpuart1: serial@2960000 {
-			compatible = "fsl,ls1021a-lpuart";
-			reg = <0x0 0x2960000 0x0 0x1000>;
-			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
-			clock-names = "ipg";
-			status = "disabled";
-		};
-
-		lpuart2: serial@2970000 {
-			compatible = "fsl,ls1021a-lpuart";
-			reg = <0x0 0x2970000 0x0 0x1000>;
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
-			clock-names = "ipg";
-			status = "disabled";
-		};
-
-		lpuart3: serial@2980000 {
-			compatible = "fsl,ls1021a-lpuart";
-			reg = <0x0 0x2980000 0x0 0x1000>;
-			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
-			clock-names = "ipg";
-			status = "disabled";
-		};
-
-		lpuart4: serial@2990000 {
-			compatible = "fsl,ls1021a-lpuart";
-			reg = <0x0 0x2990000 0x0 0x1000>;
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
-			clock-names = "ipg";
-			status = "disabled";
-		};
-
-		lpuart5: serial@29a0000 {
-			compatible = "fsl,ls1021a-lpuart";
-			reg = <0x0 0x29a0000 0x0 0x1000>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
-			clock-names = "ipg";
-			status = "disabled";
-		};
-
-		wdog0: watchdog@2ad0000 {
-			compatible = "fsl,imx21-wdt";
-			reg = <0x0 0x2ad0000 0x0 0x10000>;
-			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
-			clock-names = "wdog-en";
-			big-endian;
-		};
-
-		sai1: sai@2b50000 {
-			#sound-dai-cells = <0>;
-			compatible = "fsl,vf610-sai";
-			reg = <0x0 0x2b50000 0x0 0x10000>;
-			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&clockgen 4 1>, <&clockgen 4 1>;
-			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 47>,
-			       <&edma0 1 46>;
-			status = "disabled";
-		};
-
-		sai2: sai@2b60000 {
-			#sound-dai-cells = <0>;
-			compatible = "fsl,vf610-sai";
-			reg = <0x0 0x2b60000 0x0 0x10000>;
-			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&clockgen 4 1>, <&clockgen 4 1>;
-			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 45>,
-			       <&edma0 1 44>;
-			status = "disabled";
-		};
-
-		edma0: edma@2c00000 {
-			#dma-cells = <2>;
-			compatible = "fsl,vf610-edma";
-			reg = <0x0 0x2c00000 0x0 0x10000>,
-			      <0x0 0x2c10000 0x0 0x10000>,
-			      <0x0 0x2c20000 0x0 0x10000>;
-			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma-tx", "edma-err";
-			dma-channels = <32>;
-			big-endian;
-			clock-names = "dmamux0", "dmamux1";
-			clocks = <&clockgen 4 1>,
-				 <&clockgen 4 1>;
-		};
-
-		dcu: dcu@2ce0000 {
-			compatible = "fsl,ls1021a-dcu";
-			reg = <0x0 0x2ce0000 0x0 0x10000>;
-			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 0>,
-				<&clockgen 4 0>;
-			clock-names = "dcu", "pix";
-			big-endian;
-			status = "disabled";
-		};
-
-		mdio0: mdio@2d24000 {
-			compatible = "gianfar";
-			device_type = "mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0 0x2d24000 0x0 0x4000>;
-		};
-
-		ptp_clock@2d10e00 {
-			compatible = "fsl,etsec-ptp";
-			reg = <0x0 0x2d10e00 0x0 0xb0>;
-			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
-			fsl,tclk-period = <5>;
-			fsl,tmr-prsc    = <2>;
-			fsl,tmr-add     = <0xaaaaaaab>;
-			fsl,tmr-fiper1  = <999999990>;
-			fsl,tmr-fiper2  = <99990>;
-			fsl,max-adj     = <499999999>;
-		};
-
-		enet0: ethernet@2d10000 {
-			compatible = "fsl,etsec2";
-			device_type = "network";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			interrupt-parent = <&gic>;
-			model = "eTSEC";
-			fsl,magic-packet;
-			ranges;
-			dma-coherent;
-
-			queue-group@2d10000 {
-				#address-cells = <2>;
-				#size-cells = <2>;
-				reg = <0x0 0x2d10000 0x0 0x1000>;
-				interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			queue-group@2d14000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
-				reg = <0x0 0x2d14000 0x0 0x1000>;
-				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		enet1: ethernet@2d50000 {
-			compatible = "fsl,etsec2";
-			device_type = "network";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			interrupt-parent = <&gic>;
-			model = "eTSEC";
-			ranges;
-			dma-coherent;
-
-			queue-group@2d50000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
-				reg = <0x0 0x2d50000 0x0 0x1000>;
-				interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			queue-group@2d54000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
-				reg = <0x0 0x2d54000 0x0 0x1000>;
-				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		enet2: ethernet@2d90000 {
-			compatible = "fsl,etsec2";
-			device_type = "network";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			interrupt-parent = <&gic>;
-			model = "eTSEC";
-			ranges;
-			dma-coherent;
-
-			queue-group@2d90000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
-				reg = <0x0 0x2d90000 0x0 0x1000>;
-				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			queue-group@2d94000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
-				reg = <0x0 0x2d94000 0x0 0x1000>;
-				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		usb@8600000 {
-			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
-			reg = <0x0 0x8600000 0x0 0x1000>;
-			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
-			dr_mode = "host";
-			phy_type = "ulpi";
-		};
-
-		usb3@3100000 {
-			compatible = "snps,dwc3";
-			reg = <0x0 0x3100000 0x0 0x10000>;
-			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-			dr_mode = "host";
-			snps,quirk-frame-length-adjustment = <0x20>;
-			snps,dis_rxdet_inp3_quirk;
-		};
-
-		pcie@3400000 {
-			compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
-			reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
-			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
-			reg-names = "regs", "config";
-			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
-			fsl,pcie-scfg = <&scfg 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			num-lanes = <4>;
-			bus-range = <0x0 0xff>;
-			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
-				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&msi1>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0000 0 0 1 &gic GIC_SPI 91  IRQ_TYPE_LEVEL_HIGH>,
-					<0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
-					<0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
-					<0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pcie@3500000 {
-			compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
-			reg = <0x00 0x03500000 0x0 0x00010000   /* controller registers */
-			       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
-			reg-names = "regs", "config";
-			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-			fsl,pcie-scfg = <&scfg 1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			num-lanes = <4>;
-			bus-range = <0x0 0xff>;
-			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
-				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-			msi-parent = <&msi2>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0000 0 0 1 &gic GIC_SPI 92  IRQ_TYPE_LEVEL_HIGH>,
-					<0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
-					<0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
-					<0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/marvell/Makefile b/arch/arm/boot/dts/marvell/Makefile
new file mode 100644
index 000000000000..1e0f5ff492f7
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/Makefile
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MMP) += \
+	pxa168-aspenite.dtb \
+	pxa910-dkb.dtb \
+	mmp2-brownstone.dtb \
+	mmp2-olpc-xo-1-75.dtb \
+	mmp3-dell-ariel.dtb
+dtb-$(CONFIG_ARCH_ORION5X) += \
+	orion5x-kuroboxpro.dtb \
+	orion5x-lacie-d2-network.dtb \
+	orion5x-lacie-ethernet-disk-mini-v2.dtb \
+	orion5x-linkstation-lsgl.dtb \
+	orion5x-linkstation-lswtgl.dtb \
+	orion5x-linkstation-lschl.dtb \
+	orion5x-lswsgl.dtb \
+	orion5x-maxtor-shared-storage-2.dtb \
+	orion5x-netgear-wnr854t.dtb \
+	orion5x-rd88f5182-nas.dtb
+dtb-$(CONFIG_MACH_ARMADA_370) += \
+	armada-370-c200-v2.dtb \
+	armada-370-db.dtb \
+	armada-370-dlink-dns327l.dtb \
+	armada-370-mirabox.dtb \
+	armada-370-netgear-rn102.dtb \
+	armada-370-netgear-rn104.dtb \
+	armada-370-rd.dtb \
+	armada-370-seagate-nas-2bay.dtb \
+	armada-370-seagate-nas-4bay.dtb \
+	armada-370-seagate-personal-cloud.dtb \
+	armada-370-seagate-personal-cloud-2bay.dtb \
+	armada-370-synology-ds213j.dtb
+dtb-$(CONFIG_MACH_ARMADA_375) += \
+	armada-375-db.dtb
+dtb-$(CONFIG_MACH_ARMADA_38X) += \
+	armada-381-netgear-gs110emx.dtb \
+	armada-382-rd-ac3x-48g4x2xl.dtb \
+	armada-385-atl-x530.dtb \
+	armada-385-clearfog-gtr-s4.dtb \
+	armada-385-clearfog-gtr-l8.dtb \
+	armada-385-db-88f6820-amc.dtb \
+	armada-385-db-ap.dtb \
+	armada-385-linksys-caiman.dtb \
+	armada-385-linksys-cobra.dtb \
+	armada-385-linksys-rango.dtb \
+	armada-385-linksys-shelby.dtb \
+	armada-385-synology-ds116.dtb \
+	armada-385-turris-omnia.dtb \
+	armada-388-clearfog.dtb \
+	armada-388-clearfog-base.dtb \
+	armada-388-clearfog-pro.dtb \
+	armada-388-db.dtb \
+	armada-388-gp.dtb \
+	armada-388-helios4.dtb \
+	armada-388-rd.dtb
+dtb-$(CONFIG_MACH_ARMADA_39X) += \
+	armada-390-db.dtb \
+	armada-395-gp.dtb \
+	armada-398-db.dtb
+dtb-$(CONFIG_MACH_ARMADA_XP) += \
+	armada-xp-axpwifiap.dtb \
+	armada-xp-crs305-1g-4s.dtb \
+	armada-xp-crs305-1g-4s-bit.dtb \
+	armada-xp-crs326-24g-2s.dtb \
+	armada-xp-crs326-24g-2s-bit.dtb \
+	armada-xp-crs328-4c-20s-4s.dtb \
+	armada-xp-crs328-4c-20s-4s-bit.dtb \
+	armada-xp-db.dtb \
+	armada-xp-db-dxbc2.dtb \
+	armada-xp-db-xc3-24g4xg.dtb \
+	armada-xp-gp.dtb \
+	armada-xp-lenovo-ix4-300d.dtb \
+	armada-xp-linksys-mamba.dtb \
+	armada-xp-matrix.dtb \
+	armada-xp-netgear-rn2120.dtb \
+	armada-xp-openblocks-ax3-4.dtb \
+	armada-xp-synology-ds414.dtb
+dtb-$(CONFIG_MACH_DOVE) += \
+	dove-cubox.dtb \
+	dove-cubox-es.dtb \
+	dove-d2plug.dtb \
+	dove-d3plug.dtb \
+	dove-dove-db.dtb \
+	dove-sbc-a510.dtb
+dtb-$(CONFIG_MACH_KIRKWOOD) += \
+	kirkwood-4i-edge-200.dtb \
+	kirkwood-b3.dtb \
+	kirkwood-blackarmor-nas220.dtb \
+	kirkwood-c200-v1.dtb \
+	kirkwood-cloudbox.dtb \
+	kirkwood-d2net.dtb \
+	kirkwood-db-88f6281.dtb \
+	kirkwood-db-88f6282.dtb \
+	kirkwood-dir665.dtb \
+	kirkwood-dns320.dtb \
+	kirkwood-dns325.dtb \
+	kirkwood-dockstar.dtb \
+	kirkwood-dreamplug.dtb \
+	kirkwood-ds109.dtb \
+	kirkwood-ds110jv10.dtb \
+	kirkwood-ds111.dtb \
+	kirkwood-ds112.dtb \
+	kirkwood-ds209.dtb \
+	kirkwood-ds210.dtb \
+	kirkwood-ds212.dtb \
+	kirkwood-ds212j.dtb \
+	kirkwood-ds409.dtb \
+	kirkwood-ds409slim.dtb \
+	kirkwood-ds411.dtb \
+	kirkwood-ds411j.dtb \
+	kirkwood-ds411slim.dtb \
+	kirkwood-goflexnet.dtb \
+	kirkwood-guruplug-server-plus.dtb \
+	kirkwood-ib62x0.dtb \
+	kirkwood-iconnect.dtb \
+	kirkwood-iomega_ix2_200.dtb \
+	kirkwood-is2.dtb \
+	kirkwood-km_fixedeth.dtb \
+	kirkwood-km_kirkwood.dtb \
+	kirkwood-l-50.dtb \
+	kirkwood-laplug.dtb \
+	kirkwood-linkstation-lsqvl.dtb \
+	kirkwood-linkstation-lsvl.dtb \
+	kirkwood-linkstation-lswsxl.dtb \
+	kirkwood-linkstation-lswvl.dtb \
+	kirkwood-linkstation-lswxl.dtb \
+	kirkwood-linksys-viper.dtb \
+	kirkwood-lschlv2.dtb \
+	kirkwood-lsxhl.dtb \
+	kirkwood-mplcec4.dtb \
+	kirkwood-mv88f6281gtw-ge.dtb \
+	kirkwood-nas2big.dtb \
+	kirkwood-net2big.dtb \
+	kirkwood-net5big.dtb \
+	kirkwood-netgear_readynas_duo_v2.dtb \
+	kirkwood-netgear_readynas_nv+_v2.dtb \
+	kirkwood-ns2.dtb \
+	kirkwood-ns2lite.dtb \
+	kirkwood-ns2max.dtb \
+	kirkwood-ns2mini.dtb \
+	kirkwood-nsa310.dtb \
+	kirkwood-nsa310a.dtb \
+	kirkwood-nsa310s.dtb \
+	kirkwood-nsa320.dtb \
+	kirkwood-nsa325.dtb \
+	kirkwood-openblocks_a6.dtb \
+	kirkwood-openblocks_a7.dtb \
+	kirkwood-openrd-base.dtb \
+	kirkwood-openrd-client.dtb \
+	kirkwood-openrd-ultimate.dtb \
+	kirkwood-pogo_e02.dtb \
+	kirkwood-pogoplug-series-4.dtb \
+	kirkwood-rd88f6192.dtb \
+	kirkwood-rd88f6281-z0.dtb \
+	kirkwood-rd88f6281-a.dtb \
+	kirkwood-rs212.dtb \
+	kirkwood-rs409.dtb \
+	kirkwood-rs411.dtb \
+	kirkwood-sheevaplug.dtb \
+	kirkwood-sheevaplug-esata.dtb \
+	kirkwood-t5325.dtb \
+	kirkwood-topkick.dtb \
+	kirkwood-ts219-6281.dtb \
+	kirkwood-ts219-6282.dtb \
+	kirkwood-ts419-6281.dtb \
+	kirkwood-ts419-6282.dtb
diff --git a/arch/arm/boot/dts/marvell/armada-370-c200-v2.dts b/arch/arm/boot/dts/marvell/armada-370-c200-v2.dts
new file mode 100644
index 000000000000..84d40e1d70ef
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-c200-v2.dts
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device Tree file for Ctera C200-V2
+ *
+ * Copyright (C) 2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Ctera C200 V2";
+	compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1024 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+	};
+
+	thermal-zones {
+		ethphy-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <2000>;
+
+			thermal-sensors = <&ethphy0>;
+
+			trips {
+				ethphy_alert1: trip1 {
+					temperature = <65000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+
+				ethphy_crit: trip2 {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pinctrl-0 = <&pmx_beeper>;
+		pinctrl-names = "default";
+		pwms = <&gpio1 31 4000>;
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		button-power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+		};
+
+		button-usb1 {
+			label = "USB1 Button";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button-usb2 {
+			label = "USB2 Button";
+			linux,code = <BTN_1>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
+		pinctrl-names = "default";
+
+		led-0 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+		};
+
+		led-7 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-8 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+		};
+
+		led-9 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+		};
+
+		led-10 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+		};
+
+		led-11 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-12 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&coherencyfab {
+	broken-idle;
+};
+
+&eth1 {
+	pinctrl-0 = <&ge1_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-handle = <&ethphy0>;
+	phy-connection-type = "rgmii-id";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <100000>;
+	status = "okay";
+
+	hwmon@2a {
+		compatible = "nuvoton,nct7802";
+		reg = <0x2a>;
+	};
+
+	rtc@30 {
+		compatible = "sii,s35390a";
+		reg = <0x30>;
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+
+	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0000000 0x200000>;
+				read-only;
+			};
+
+			partition@200000 {
+				label = "certificate";
+				reg = <0x0200000 0x100000>;
+				read-only;
+			};
+
+			partition@300000 {
+				label = "preset_cfg";
+				reg = <0x0300000 0x100000>;
+				read-only;
+			};
+
+			partition@400000 {
+				label = "dev_params";
+				reg = <0x0400000 0x100000>;
+				read-only;
+			};
+			partition@500000 {
+				label = "active_bank";
+				reg = <0x0500000 0x0100000>;
+			};
+
+			partition@600000 {
+				label = "magic";
+				reg = <0x0600000 0x0100000>;
+				read-only;
+			};
+
+			partition@700000 {
+				label = "bank1";
+				reg = <0x0700000 0x2800000>;
+			};
+
+			partition@2f00000 {
+				label = "bank2";
+				reg = <0x2f00000 0x2800000>;
+			};
+
+			/* 0x5700000-0x5a00000 undefined in vendor firmware */
+
+			partition@5a00000 {
+				label = "reserved";
+				reg = <0x5a00000 0x2000000>;
+			};
+
+			partition@7a00000 {
+				label = "rootfs";
+				reg = <0x7a00000 0x8600000>;
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	pcie@1,0 { /* Renesas uPD720202 USB 3.0 controller */
+		pinctrl-0 = <&pmx_pcie>;
+		pinctrl-names = "default";
+		status = "okay";
+		reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	pmx_poweroff: pmx-poweroff {
+		marvell,pins = "mpp7";
+		marvell,function = "gpo";
+	};
+
+	pmx_power_cpu: pmx-power-cpu {
+		marvell,pins = "mpp4";
+		marvell,function = "vdd";
+	};
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp6", "mpp10", "mpp14", "mpp32";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds1: pmx-leds1 {
+		marvell,pins = "mpp47";
+		marvell,function = "gpo";
+	};
+
+	pmx_leds2: pmx-leds2 {
+		marvell,pins = "mpp12", "mpp13", "mpp15", "mpp16", "mpp50", "mpp51",
+			       "mpp52", "mpp53", "mpp55", "mpp56", "mpp57", "mpp58";
+		marvell,function = "gpio";
+	};
+
+	pmx_pcie: pmx-pcie {
+		marvell,pins = "mpp59";
+		marvell,function = "gpio";
+	};
+
+	pmx_beeper: pmx-beeper {
+		marvell,pins = "mpp63";
+		marvell,function = "gpio";
+	};
+};
+
+&pmsu {
+	pinctrl-0 = <&pmx_power_cpu>;
+	pinctrl-names = "default";
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&sata {
+	nr-ports = <2>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hdd0_temp: sata-port@0 {
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	hdd1_temp: sata-port@1 {
+		reg = <1>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-370-db.dts b/arch/arm/boot/dts/marvell/armada-370-db.dts
new file mode 100644
index 000000000000..a9a05d826f22
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-db.dts
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 370 evaluation board
+ * (DB-88F6710-BP-DDR3)
+ *
+ *  Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-370.dtsi"
+
+/ {
+	model = "Marvell Armada 370 Evaluation Board";
+	compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			i2c@11000 {
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				clock-frequency = <100000>;
+				status = "okay";
+				audio_codec: audio-codec@4a {
+					#sound-dai-cells = <0>;
+					compatible = "cirrus,cs42l51";
+					reg = <0x4a>;
+				};
+			};
+
+			audio-controller@30000 {
+				pinctrl-0 = <&i2s_pins2>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins1>;
+				pinctrl-names = "default";
+				/*
+				 * This device is disabled by default, because
+				 * using the SD card connector requires
+				 * changing the default CON40 connector
+				 * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a
+				 * different connector
+				 * "DB-88F6710_MPP_RGMII_SD_Jumper".
+				 */
+				status = "disabled";
+				/* No CD or WP GPIOs */
+				broken-cd;
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Armada 370 DB Audio";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Headphone", "Out Jack",
+			"Line", "In Jack";
+		simple-audio-card,routing =
+			"Out Jack", "HPL",
+			"Out Jack", "HPR",
+			"AIN1L", "In Jack",
+			"AIN1R", "In Jack";
+		status = "okay";
+
+		simple-audio-card,dai-link@0 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 0>;
+			};
+
+			codec {
+				sound-dai = <&audio_codec>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 1>;
+			};
+
+			codec {
+				sound-dai = <&spdif_out>;
+			};
+		};
+
+		simple-audio-card,dai-link@2 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 1>;
+			};
+
+			codec {
+				sound-dai = <&spdif_in>;
+			};
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
+	spdif_in: spdif-in {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+	};
+};
+
+&pciec {
+	status = "okay";
+	/*
+	 * The two PCIe units are accessible through
+	 * both standard PCIe slots and mini-PCIe
+	 * slots on the board.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+
+&spi0 {
+	pinctrl-0 = <&spi0_pins2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mx25l25635e", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/marvell/armada-370-dlink-dns327l.dts
new file mode 100644
index 000000000000..d4c4efabd254
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-dlink-dns327l.dts
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for D-Link DNS-327L
+ *
+ * Copyright (C) 2015, Andrew Andrianov <andrew@ncrmnt.org>
+ */
+
+/* Remaining unsolved:
+ * There's still some unknown device on i2c address 0x13
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "D-Link DNS-327L";
+	compatible = "dlink,dns327l",
+		"marvell,armada370",
+		"marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MiB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+
+		internal-regs {
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <
+			&backup_button_pin
+			&power_button_pin
+			&reset_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+		};
+
+		backup-button {
+			label = "Backup Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <
+			&sata_l_amber_pin
+			&sata_r_amber_pin
+			&backup_led_pin
+			/* Ensure these are managed by hardware */
+			&sata_l_white_pin
+			&sata_r_white_pin>;
+
+		pinctrl-names = "default";
+
+		led-sata-r-amber {
+			label = "dns327l:amber:sata-r";
+			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		led-sata-l-amber {
+			label = "dns327l:amber:sata-l";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		led-backup {
+			label = "dns327l:white:usb";
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+
+	usb_power: regulator-1 {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&xhci_pwr_pin>;
+		pinctrl-names = "default";
+		regulator-name = "USB3.0 Port Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-boot-on;
+		regulator-always-on;
+		gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+	};
+
+	sata_r_power: regulator-2 {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&sata_r_pwr_pin>;
+		pinctrl-names = "default";
+		regulator-name = "SATA-R Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <2000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+	};
+
+	sata_l_power: regulator-3 {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&sata_l_pwr_pin>;
+		pinctrl-names = "default";
+		regulator-name = "SATA-L Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <4000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&pinctrl {
+	sata_l_white_pin: sata-l-white-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "sata0";
+	};
+
+	sata_r_white_pin: sata-r-white-pin {
+		marvell,pins = "mpp55";
+		marvell,function = "sata1";
+	};
+
+	sata_r_amber_pin: sata-r-amber-pin {
+		marvell,pins = "mpp52";
+		marvell,function = "gpio";
+	};
+
+	sata_l_amber_pin: sata-l-amber-pin {
+		marvell,pins = "mpp53";
+		marvell,function = "gpio";
+	};
+
+	backup_led_pin: backup-led-pin {
+		marvell,pins = "mpp61";
+		marvell,function = "gpo";
+	};
+
+	xhci_pwr_pin: xhci-pwr-pin {
+		marvell,pins = "mpp13";
+		marvell,function = "gpio";
+	};
+
+	sata_r_pwr_pin: sata-r-pwr-pin {
+		marvell,pins = "mpp54";
+		marvell,function = "gpio";
+	};
+
+	sata_l_pwr_pin: sata-l-pwr-pin {
+		marvell,pins = "mpp56";
+		marvell,function = "gpio";
+	};
+
+	uart1_pins: uart1-pins {
+		marvell,pins = "mpp60", "mpp61";
+		marvell,function = "uart1";
+	};
+
+	power_button_pin: power-button-pin {
+		marvell,pins = "mpp65";
+		marvell,function = "gpio";
+	};
+
+	backup_button_pin: backup-button-pin {
+		marvell,pins = "mpp63";
+		marvell,function = "gpio";
+	};
+
+	reset_button_pin: reset-button-pin {
+		marvell,pins = "mpp64";
+		marvell,function = "gpio";
+	};
+};
+
+/* Serial console */
+&uart0 {
+	status = "okay";
+};
+
+/* Connected to Weltrend MCU */
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mdio {
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+		marvell,reg-init = <0x2 0x19 0x0 0x0077>,
+				   <0x2 0x18 0x0 0x5747>;
+	};
+};
+
+&eth1 {
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&i2c0 {
+	compatible = "marvell,mv64xxx-i2c";
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				/* 1.0 MiB */
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "u-boot-env";
+				/* 128 KiB */
+				reg = <0x100000 0x20000>;
+				read-only;
+			};
+
+			partition@120000 {
+				label = "uImage";
+				/* 7 MiB */
+				reg = <0x120000 0x700000>;
+			};
+
+			partition@820000 {
+				label = "ubifs";
+				/* ~ 84 MiB */
+				reg = <0x820000 0x54e0000>;
+			};
+
+			/* Hardcoded into stock bootloader */
+			partition@5d00000 {
+				label = "failsafe-uImage";
+				/* 5 MiB */
+				reg = <0x5d00000 0x500000>;
+			};
+
+			partition@6200000 {
+				label = "failsafe-fs";
+				/* 29 MiB */
+				reg = <0x6200000 0x1d00000>;
+			};
+
+			partition@7f00000 {
+				label = "bbt";
+				/* 1 MiB for BBT */
+				reg = <0x7f00000 0x100000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-370-mirabox.dts b/arch/arm/boot/dts/marvell/armada-370-mirabox.dts
new file mode 100644
index 000000000000..7c2f5a79b50d
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-mirabox.dts
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Globalscale Mirabox
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "Globalscale Mirabox";
+	compatible = "globalscale,mirabox", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			timer@20300 {
+				clock-frequency = <600000000>;
+				status = "okay";
+			};
+
+			gpio_leds {
+				compatible = "gpio-leds";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwr_led_pin &stat_led_pins>;
+
+				green_pwr_led {
+					label = "mirabox:green:pwr";
+					gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+					default-state = "keep";
+				};
+
+				blue_stat_led {
+					label = "mirabox:blue:stat";
+					gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+					default-state = "off";
+				};
+
+				green_stat_led {
+					label = "mirabox:green:stat";
+					gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+					default-state = "off";
+				};
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			crypto@90000 {
+				status = "okay";
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins3>;
+				pinctrl-names = "default";
+				status = "okay";
+				/*
+				 * No CD or WP GPIOs: SDIO interface used for
+				 * Wifi/Bluetooth chip
+				 */
+				 broken-cd;
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+				pca9505: pca9505@25 {
+					compatible = "nxp,pca9505";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0x25>;
+				};
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* Internal mini-PCIe connector */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Connected on the PCB to a USB 3.0 XHCI controller */
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	pwr_led_pin: pwr-led-pin {
+		marvell,pins = "mpp63";
+		marvell,function = "gpio";
+	};
+
+	stat_led_pins: stat-led-pins {
+		marvell,pins = "mpp64", "mpp65";
+		marvell,function = "gpio";
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x400000>;
+			};
+			partition@400000 {
+				label = "Linux";
+				reg = <0x400000 0x400000>;
+			};
+			partition@800000 {
+				label = "Filesystem";
+				reg = <0x800000 0x3f800000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/marvell/armada-370-netgear-rn102.dts
new file mode 100644
index 000000000000..079b37cf148a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-netgear-rn102.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NETGEAR ReadyNAS 102
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS 102";
+	compatible = "netgear,readynas-102", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+
+		internal-regs {
+
+			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
+			rtc@10300 {
+				status = "disabled";
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* eSATA interface */
+			sata@a0000 {
+				nr-ports = <1>;
+				status = "okay";
+			};
+
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				clock-frequency = <100000>;
+
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+
+				status = "okay";
+
+				isl12057: rtc@68 {
+					compatible = "isil,isl12057";
+					reg = <0x68>;
+					wakeup-source;
+				};
+
+				g762: g762@3e {
+					compatible = "gmt,g762";
+					reg = <0x3e>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+			};
+		};
+	};
+
+	clocks {
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <8192>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&power_led_pin
+			     &sata1_led_pin
+			     &sata2_led_pin
+			     &backup_led_pin>;
+		pinctrl-names = "default";
+
+		blue-power-led {
+			label = "rn102:blue:pwr";
+			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		blue-sata1-led {
+			label = "rn102:blue:sata1";
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		blue-sata2-led {
+			label = "rn102:blue:sata2";
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		blue-backup-led {
+			label = "rn102:blue:backup";
+			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&power_button_pin
+			     &reset_button_pin
+			     &backup_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+		};
+
+		backup-button {
+			label = "Backup Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* Connected to Marvell 88SE9170 SATA controller */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Connected to FL1009 USB 3.0 controller */
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+};
+
+&pinctrl {
+	power_led_pin: power-led-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "gpio";
+	};
+
+	sata1_led_pin: sata1-led-pin {
+		marvell,pins = "mpp15";
+		marvell,function = "gpio";
+	};
+
+	sata2_led_pin: sata2-led-pin {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+
+	backup_led_pin: backup-led-pin {
+		marvell,pins = "mpp56";
+		marvell,function = "gpio";
+	};
+
+	backup_button_pin: backup-button-pin {
+		marvell,pins = "mpp58";
+		marvell,function = "gpio";
+	};
+
+	power_button_pin: power-button-pin {
+		marvell,pins = "mpp62";
+		marvell,function = "gpio";
+	};
+
+	reset_button_pin: reset-button-pin {
+		marvell,pins = "mpp6";
+		marvell,function = "gpio";
+	};
+
+	poweroff: poweroff {
+		marvell,pins = "mpp8";
+		marvell,function = "gpio";
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+
+		/* Use Hardware BCH ECC */
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x180000>;  /* 1.5MB */
+				read-only;
+			};
+
+			partition@180000 {
+				label = "u-boot-env";
+				reg = <0x180000 0x20000>;    /* 128KB */
+				read-only;
+			};
+
+			partition@200000 {
+				label = "uImage";
+				reg = <0x0200000 0x600000>;    /* 6MB */
+			};
+
+			partition@800000 {
+				label = "minirootfs";
+				reg = <0x0800000 0x400000>;    /* 4MB */
+			};
+
+			/* Last MB is for the BBT, i.e. not writable */
+			partition@c00000 {
+				label = "ubifs";
+				reg = <0x0c00000 0x7400000>; /* 116MB */
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/marvell/armada-370-netgear-rn104.dts
new file mode 100644
index 000000000000..d752ac1d7b58
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-netgear-rn104.dts
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NETGEAR ReadyNAS 104
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS 104";
+	compatible = "netgear,readynas-104", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+
+		internal-regs {
+
+			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
+			rtc@10300 {
+				status = "disabled";
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				clock-frequency = <100000>;
+
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+
+				status = "okay";
+
+				isl12057: rtc@68 {
+					compatible = "isil,isl12057";
+					reg = <0x68>;
+					wakeup-source;
+				};
+
+				g762: g762@3e {
+					compatible = "gmt,g762";
+					reg = <0x3e>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				pca9554: pca9554@23 {
+					compatible = "nxp,pca9554";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0x23>;
+				};
+			};
+		};
+	};
+
+	clocks {
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <8192>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&backup_led_pin &power_led_pin>;
+		pinctrl-names = "default";
+
+		blue-backup-led {
+			label = "rn104:blue:backup";
+			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue-power-led {
+			label = "rn104:blue:pwr";
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "keep";
+		};
+
+		blue-sata1-led {
+			label = "rn104:blue:sata1";
+			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blue-sata2-led {
+			label = "rn104:blue:sata2";
+			gpios = <&pca9554 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blue-sata3-led {
+			label = "rn104:blue:sata3";
+			gpios = <&pca9554 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blue-sata4-led {
+			label = "rn104:blue:sata4";
+			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	auxdisplay {
+		compatible = "hit,hd44780";
+		data-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>,
+				<&gpio1 26 GPIO_ACTIVE_HIGH>,
+				<&gpio1 27 GPIO_ACTIVE_HIGH>,
+				<&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+		rs-gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		rw-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+		backlight-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+		display-height-chars = <2>;
+		display-width-chars = <16>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&backup_button_pin
+			     &power_button_pin
+			     &reset_button_pin>;
+		pinctrl-names = "default";
+
+		backup-button {
+			label = "Backup Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+		};
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* Connected to FL1009 USB 3.0 controller */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Connected to Marvell 88SE9215 SATA controller */
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	poweroff: poweroff {
+		marvell,pins = "mpp60";
+		marvell,function = "gpio";
+	};
+
+	backup_button_pin: backup-button-pin {
+		marvell,pins = "mpp52";
+		marvell,function = "gpio";
+	};
+
+	power_button_pin: power-button-pin {
+		marvell,pins = "mpp62";
+		marvell,function = "gpio";
+	};
+
+	backup_led_pin: backup-led-pin {
+		marvell,pins = "mpp63";
+		marvell,function = "gpio";
+	};
+
+	power_led_pin: power-led-pin {
+		marvell,pins = "mpp64";
+		marvell,function = "gpio";
+	};
+
+	reset_button_pin: reset-button-pin {
+		marvell,pins = "mpp65";
+		marvell,function = "gpio";
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+
+		/* Use Hardware BCH ECC */
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x180000>;  /* 1.5MB */
+				read-only;
+			};
+
+			partition@180000 {
+				label = "u-boot-env";
+				reg = <0x180000 0x20000>;    /* 128KB */
+				read-only;
+			};
+
+			partition@200000 {
+				label = "uImage";
+				reg = <0x0200000 0x600000>;    /* 6MB */
+			};
+
+			partition@800000 {
+				label = "minirootfs";
+				reg = <0x0800000 0x400000>;    /* 4MB */
+			};
+
+			/* Last MB is for the BBT, i.e. not writable */
+			partition@c00000 {
+				label = "ubifs";
+				reg = <0x0c00000 0x7400000>; /* 116MB */
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-370-rd.dts b/arch/arm/boot/dts/marvell/armada-370-rd.dts
new file mode 100644
index 000000000000..f23f6b3fc8f3
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-rd.dts
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 370 Reference Design board
+ * (RD-88F6710-A1)
+ *
+ *  Copied from arch/arm/boot/dts/armada-370-db.dts
+ *
+ *  Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "Marvell Armada 370 Reference Design";
+	compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "sgmii";
+			};
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy-mode = "rgmii-id";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins1>;
+				pinctrl-names = "default";
+				status = "okay";
+				/* No CD or WP GPIOs */
+				broken-cd;
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+
+			gpio-keys {
+				compatible = "gpio-keys";
+				button {
+					label = "Software Button";
+					linux,code = <KEY_POWER>;
+					gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			gpio-fan {
+				compatible = "gpio-fan";
+				gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+				gpio-fan,speed-map = <0 0>, <3000 1>;
+				pinctrl-0 = <&fan_pins>;
+				pinctrl-names = "default";
+			};
+
+			gpio_leds {
+				compatible = "gpio-leds";
+				pinctrl-names = "default";
+				pinctrl-0 = <&led_pins>;
+
+				sw_led {
+					label = "370rd:green:sw";
+					gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+					default-state = "keep";
+				};
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* Internal mini-PCIe connector */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Internal mini-PCIe connector */
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_WHITE>;
+				function = LED_FUNCTION_WAN;
+				default-state = "keep";
+			};
+		};
+	};
+
+	switch: ethernet-switch@10 {
+		compatible = "marvell,mv88e6085";
+		reg = <0x10>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet-port@0 {
+				reg = <0>;
+				label = "lan0";
+			};
+
+			ethernet-port@1 {
+				reg = <1>;
+				label = "lan1";
+			};
+
+			ethernet-port@2 {
+				reg = <2>;
+				label = "lan2";
+			};
+
+			ethernet-port@3 {
+				reg = <3>;
+				label = "lan3";
+			};
+
+			ethernet-port@5 {
+				reg = <5>;
+				ethernet = <&eth1>;
+				phy-mode = "rgmii-id";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switchphy0: ethernet-phy@0 {
+				reg = <0>;
+				interrupt-parent = <&switch>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			switchphy1: ethernet-phy@1 {
+				reg = <1>;
+				interrupt-parent = <&switch>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			switchphy2: ethernet-phy@2 {
+				reg = <2>;
+				interrupt-parent = <&switch>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			switchphy3: ethernet-phy@3 {
+				reg = <3>;
+				interrupt-parent = <&switch>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
+
+
+&pinctrl {
+	fan_pins: fan-pins {
+		marvell,pins = "mpp8";
+		marvell,function = "gpio";
+	};
+
+	led_pins: led-pins {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts
new file mode 100644
index 000000000000..6ec3dd3337f4
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Seagate NAS 2-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Vincent Donnefort <vdonnefort@gmail.com>
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate NAS 2-Bay
+ * Code name (board/PCB)        : Dart 2-Bay
+ * Model name (case sticker)    : SRPD20
+ * Material desc (product spec) : STCTxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-nas-xbay.dtsi"
+
+/ {
+	model = "Seagate NAS 2-Bay (Dart, SRPD20)";
+	compatible = "seagate,dart-2", "marvell,armada370", "marvell,armada-370-xp";
+
+	gpio-fan {
+		gpio-fan,speed-map =
+			<   0 3>,
+			< 950 2>,
+			<1400 1>,
+			<1800 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts
new file mode 100644
index 000000000000..3011578a3124
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Seagate NAS 4-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Vincent Donnefort <vdonnefort@gmail.com>
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate NAS 4-Bay
+ * Code name (board/PCB)        : Dart 4-Bay
+ * Model name (case sticker)    : SRPD40
+ * Material desc (product spec) : STCUxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-nas-xbay.dtsi"
+#include <dt-bindings/leds/leds-ns2.h>
+
+/ {
+	model = "Seagate NAS 4-Bay (Dart, SRPD40)";
+	compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp";
+
+	soc {
+		internal-regs {
+			ethernet@74000 {
+				status = "okay";
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			i2c@11000 {
+				/* I2C GPIO expander (PCA9554A) */
+				pca9554: pca9554@21 {
+					compatible = "nxp,pca9554";
+					reg = <0x21>;
+					#gpio-cells = <2>;
+					gpio-controller;
+				};
+			};
+		};
+	};
+
+	regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA2 power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pca9554 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA3 power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pca9554 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-leds {
+		led-red-sata2 {
+			label = "dart:red:sata2";
+			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
+		};
+		led-red-sata3 {
+			label = "dart:red:sata3";
+			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds-ns2 {
+		compatible = "lacie,ns2-leds";
+
+		white-sata2 {
+			label = "dart:white:sata2";
+			cmd-gpio = <&pca9554 1 GPIO_ACTIVE_HIGH>;
+			slow-gpio = <&pca9554 2 GPIO_ACTIVE_HIGH>;
+			num-modes = <4>;
+			modes-map = <NS_V2_LED_SATA 0 0
+				     NS_V2_LED_OFF  0 1
+				     NS_V2_LED_ON   1 0
+				     NS_V2_LED_ON   1 1>;
+		};
+		white-sata3 {
+			label = "dart:white:sata3";
+			cmd-gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
+			slow-gpio = <&pca9554 5 GPIO_ACTIVE_HIGH>;
+			num-modes = <4>;
+			modes-map = <NS_V2_LED_SATA 0 0
+				     NS_V2_LED_OFF  0 1
+				     NS_V2_LED_ON   1 0
+				     NS_V2_LED_ON   1 1>;
+		};
+	};
+
+	gpio-fan {
+		gpio-fan,speed-map =
+			<   0 3>,
+			< 800 2>,
+			<1050 1>,
+			<1300 0>;
+	};
+};
+
+&pciec {
+	/* SATA AHCI controller 88SE9170 */
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-xbay.dtsi
new file mode 100644
index 000000000000..ffb3179033e7
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-xbay.dtsi
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree common file for the Seagate NAS 2 and 4-bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Vincent Donnefort <vdonnefort@gmail.com>
+ */
+
+/*
+ * TODO: add support for the white SATA LEDs associated with HDD 0 and 1.
+ */
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			i2c@11000 {
+				status = "okay";
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				clock-frequency = <100000>;
+
+				/* RTC - NXP 8563T (second source) */
+				rtc@51 {
+					compatible = "nxp,pcf8563";
+					reg = <0x51>;
+					interrupts = <110>;
+				};
+				/* RTC - MCP7940NT */
+				rtc@6f {
+					compatible = "microchip,mcp7941x";
+					reg = <0x6f>;
+					interrupts = <110>;
+				};
+			};
+		};
+
+	};
+
+	regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA0 power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA1 power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio2 0 GPIO_ACTIVE_HIGH
+			 &gpio2 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-power {
+			label = "Power button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+		button-backup {
+			label = "Backup button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+		button-reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-white-power {
+			label = "dart:white:power";
+			gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+
+		};
+		led-red-power {
+			label = "dart:red:power";
+			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		};
+		led-red-sata0 {
+			label = "dart:red:sata0";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		led-red-sata1 {
+			label = "dart:red:sata1";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* USB 3.0 bridge ASM1042A */
+	pcie@2,0 {
+		status = "okay";
+	};
+};
+
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&hdd0_led_sata_pin>, <&hdd1_led_sata_pin>;
+	pinctrl-names = "default";
+
+	hdd0_led_sata_pin: hdd0-led-sata-pin {
+		marvell,pins = "mpp48";
+		marvell,function = "sata1";
+	};
+	hdd0_led_gpio_pin: hdd0-led-gpio-pin {
+		marvell,pins = "mpp48";
+		marvell,function = "gpio";
+	};
+	hdd1_led_sata_pin: hdd1-led-sata-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "sata0";
+	};
+	hdd1_led_gpio_pin: hdd1-led-gpio-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "gpio";
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x300000>;
+			};
+			partition@300000 {
+				label = "device-tree";
+				reg = <0x300000 0x20000>;
+			};
+			partition@320000 {
+				label = "linux";
+				reg = <0x320000 0x2000000>;
+			};
+			partition@2320000 {
+				label = "rootfs";
+				reg = <0x2320000 0xdce0000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud-2bay.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud-2bay.dts
new file mode 100644
index 000000000000..45d8ec5dfeb7
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud-2bay.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Seagate Personal Cloud NAS 2-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate Personal Cloud 2-Bay
+ * Code name (board/PCB)        : Cumulus Max
+ * Model name (case sticker)    : SRN22C
+ * Material desc (product spec) : STCSxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-personal-cloud.dtsi"
+
+/ {
+	model = "Seagate Personal Cloud 2-Bay (Cumulus, SRN22C)";
+	compatible = "seagate,cumulus-max", "marvell,armada370", "marvell,armada-370-xp";
+
+	soc {
+		internal-regs {
+			sata@a0000 {
+				status = "okay";
+				nr-ports = <2>;
+			};
+		};
+	};
+
+	regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA1 power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud.dts
index aad39e97af43..578b54b39c8f 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud.dts
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree file for Seagate Personal Cloud NAS (Armada 370 SoC).
  *
  * Copyright (C) 2015 Seagate
  *
  * Author: Simon Guinot <simon.guinot@sequanux.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /*
diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud.dtsi
new file mode 100644
index 000000000000..054124857235
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud.dtsi
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree common file for the Seagate Personal Cloud NAS 1 and 2-Bay
+ * (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ */
+
+/*
+ * TODO: add support for the white SATA LED.
+ */
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			coherency-fabric@20200 {
+				broken-idle;
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@74000 {
+				status = "okay";
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+		};
+	};
+
+	regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	};
+
+	regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA0 power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-power {
+			label = "Power button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+			debounce-interval = <100>;
+		};
+		button-reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+		button-usb {
+			label = "USB VBUS error";
+			linux,code = <KEY_UNKNOWN>;
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-red-sata0 {
+			label = "cumulus:red:sata0";
+			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* USB 3.0 Bridge ASM1042A */
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&sata_led_pin>;
+	pinctrl-names = "default";
+
+	sata_led_pin: sata-led-pin {
+		marvell,pins = "mpp60";
+		marvell,function = "sata0";
+	};
+	gpio_led_pin: gpio-led-pin {
+		marvell,pins = "mpp60";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-0 = <&spi0_pins2>;
+	pinctrl-names = "default";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/* MX25L8006E */
+		compatible = "mxicy,mx25l8005", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
new file mode 100644
index 000000000000..02599a3e9816
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Synology DS213j
+ *
+ * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the old 0xd0000000).
+ * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
+ * bootloaders provided by Marvell. It is used in recent versions of
+ * DSM software provided by Synology. Nonetheless, some earlier boards
+ * were delivered with an older version of u-boot that left internal
+ * registers mapped at 0xd0000000. If you have such a device you will
+ * not be able to directly boot a kernel based on this Device Tree. In
+ * that case, the preferred solution is to update your bootloader (e.g.
+ * by upgrading to latest version of DSM, or building a new one and
+ * installing it from u-boot prompt) or adjust the Devive Tree
+ * (s/0xf1000000/0xd0000000/ in 'ranges' below).
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "Synology DS213j";
+	compatible = "synology,ds213j", "marvell,armada370",
+		     "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+
+		internal-regs {
+
+			/* RTC provided by Seiko S-35390A I2C RTC chip below */
+			rtc@10300 {
+				status = "disabled";
+			};
+
+			i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				clock-frequency = <400000>;
+				status = "okay";
+
+				/* Main device RTC chip */
+				s35390a: s35390a@30 {
+					 compatible = "sii,s35390a";
+					 reg = <0x30>;
+				};
+			};
+
+			/* Connected to a header on device's PCB */
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* Connected to a TI MSP430F2111 for power control */
+			serial@12100 {
+				status = "okay";
+			};
+
+			poweroff@12100 {
+				compatible = "synology,power-off";
+				reg = <0x12100 0x100>;
+				clocks = <&coreclk 0>;
+			};
+
+			/* rear USB port, near reset button */
+			usb@50000 {
+				status = "okay";
+			};
+
+			/* rear USB port, near RJ45 port */
+			usb@51000 {
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "sgmii";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-fan-32-38 {
+		status = "okay";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&fan_ctrl_low_pin &fan_ctrl_mid_pin
+			     &fan_ctrl_high_pin &fan_alarm_pin>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 31 GPIO_ACTIVE_HIGH
+			 &gpio2  0 GPIO_ACTIVE_HIGH
+			 &gpio2  1 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <   0 0>,
+				     <1000 1>,
+				     <1150 2>,
+				     <1350 4>,
+				     <1500 3>,
+				     <1650 5>,
+				     <1750 6>,
+				     <1900 7>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&disk1_led_pin
+			     &disk2_led_pin>;
+		pinctrl-names = "default";
+
+		disk1-led-amber {
+			label = "synology:amber:disk1";
+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		disk2-led-amber {
+			label = "synology:amber:disk2";
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+	};
+
+	sata1_regulator: sata1-regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA1 Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <2000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&sata1_pwr_pin>;
+		pinctrl-names = "default";
+	};
+
+	sata2_regulator: sata2-regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA2 Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <4000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&sata2_pwr_pin>;
+		pinctrl-names = "default";
+	};
+};
+
+&mdio {
+	phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	disk1_led_pin: disk1-led-pin {
+		marvell,pins = "mpp31";
+		marvell,function = "gpio";
+	};
+
+	disk2_led_pin: disk2-led-pin {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+
+	sata1_pwr_pin: sata1-pwr-pin {
+		marvell,pins = "mpp37";
+		marvell,function = "gpio";
+	};
+
+	sata2_pwr_pin: sata2-pwr-pin {
+		marvell,pins = "mpp62";
+		marvell,function = "gpio";
+	};
+
+	sata1_pres_pin: sata1-pres-pin {
+		marvell,pins = "mpp60";
+		marvell,function = "gpio";
+	};
+
+	sata2_pres_pin: sata2-pres-pin {
+		marvell,pins = "mpp48";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit0_pin: syno-id-bit0-pin {
+		marvell,pins = "mpp55";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit1_pin: syno-id-bit1-pin {
+		marvell,pins = "mpp56";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit2_pin: syno-id-bit2-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit3_pin: syno-id-bit3-pin {
+		marvell,pins = "mpp58";
+		marvell,function = "gpio";
+	};
+
+	fan_ctrl_low_pin: fan-ctrl-low-pin {
+		marvell,pins = "mpp65";
+		marvell,function = "gpio";
+	};
+
+	fan_ctrl_mid_pin: fan-ctrl-mid-pin {
+		marvell,pins = "mpp64";
+		marvell,function = "gpio";
+	};
+
+	fan_ctrl_high_pin: fan-ctrl-high-pin {
+		marvell,pins = "mpp63";
+		marvell,function = "gpio";
+	};
+
+	fan_alarm_pin: fan-alarm-pin {
+		marvell,pins = "mpp38";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+
+		/*
+		 * Warning!
+		 *
+		 * Synology u-boot uses its compiled-in environment
+		 * and it seems Synology did not care to change u-boot
+		 * default configuration in order to allow saving a
+		 * modified environment at a sensible location. So,
+		 * if you do a 'saveenv' under u-boot, your modified
+		 * environment will be saved at 1MB after the start
+		 * of the flash, i.e. in the middle of the uImage.
+		 * For that reason, it is strongly advised not to
+		 * change the default environment, unless you know
+		 * what you are doing.
+		 */
+		partition@0 { /* u-boot */
+			label = "RedBoot";
+			reg = <0x00000000 0x000c0000>; /* 768KB */
+		};
+
+		partition@c0000 { /* uImage */
+			label = "zImage";
+			reg = <0x000c0000 0x002d0000>; /* 2880KB */
+		};
+
+		partition@390000 { /* uInitramfs */
+			label = "rd.gz";
+			reg = <0x00390000 0x00440000>; /* 4250KB */
+		};
+
+		partition@7d0000 { /* MAC address and serial number */
+			label = "vendor";
+			reg = <0x007d0000 0x00010000>; /* 64KB */
+		};
+
+		partition@7e0000 {
+			label = "RedBoot config";
+			reg = <0x007e0000 0x00010000>; /* 64KB */
+		};
+
+		partition@7f0000 {
+			label = "FIS directory";
+			reg = <0x007f0000 0x00010000>; /* 64KB */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/marvell/armada-370-xp.dtsi
index 09495e87b038..954c891e5aee 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-370-xp.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada 370 and Armada XP SoC
  *
@@ -8,44 +9,6 @@
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  * Ben Dooks <ben.dooks@codethink.co.uk>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
  * This file contains the definitions that are common to the Armada
  * 370 and Armada XP SoC.
  */
@@ -151,7 +114,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <31>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -161,7 +123,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <32>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -207,7 +168,6 @@
 			mpic: interrupt-controller@20a00 {
 				compatible = "marvell,mpic";
 				#interrupt-cells = <1>;
-				#size-cells = <1>;
 				interrupt-controller;
 				msi-controller;
 			};
@@ -281,11 +241,11 @@
 				status = "disabled";
 			};
 
-			nand: nand@d0000 {
-				compatible = "marvell,armada370-nand";
+			nand_controller: nand-controller@d0000 {
+				compatible = "marvell,armada370-nand-controller";
 				reg = <0xd0000 0x54>;
 				#address-cells = <1>;
-				#size-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <113>;
 				clocks = <&coredivclk 0>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/marvell/armada-370.dtsi
index f9cf1273f35e..2013a5ccecd3 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-370.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada 370 family SoC
  *
@@ -7,44 +8,6 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
  * Contains definitions specific to the Armada 370 SoC that are not
  * common to all Armada SoCs.
  */
@@ -72,7 +35,7 @@
 			reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
 		};
 
-		pciec: pcie-controller@82000000 {
+		pciec: pcie@82000000 {
 			compatible = "marvell,armada-370-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -97,32 +60,54 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
 				#interrupt-cells = <1>;
                                 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
                                           0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
 				#interrupt-cells = <1>;
                                 ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
                                           0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 9>;
 				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/marvell/armada-375-db.dts b/arch/arm/boot/dts/marvell/armada-375-db.dts
new file mode 100644
index 000000000000..4c4092790a20
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-375-db.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 375 evaluation board
+ * (DB-88F6720)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-375.dtsi"
+
+/ {
+	model = "Marvell Armada 375 Development Board";
+	compatible = "marvell,a375-db", "marvell,armada375";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
+
+	};
+};
+&pciec {
+	status = "okay";
+};
+
+/*
+ * The two PCIe units are accessible through
+ * standard PCIe slots on the board.
+ */
+&pcie0 {
+	/* Port 0, Lane 0 */
+	status = "okay";
+};
+
+&pcie1 {
+	/* Port 1, Lane 0 */
+	status = "okay";
+};
+
+
+&spi0 {
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+
+	/*
+	 * SPI conflicts with NAND, so we disable it here, and
+	 * select NAND as the enabled device by default.
+	 */
+
+	status = "disabled";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&pinctrl {
+	sdio_st_pins: sdio-st-pins {
+		marvell,pins = "mpp44", "mpp45";
+		marvell,function = "gpio";
+	};
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&sdio {
+	pinctrl-0 = <&sdio_pins &sdio_st_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
+&ethernet {
+	status = "okay";
+};
+
+
+&eth0 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&eth1 {
+	status = "okay";
+	phy = <&phy3>;
+	phy-mode = "gmii";
+};
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/marvell/armada-375.dtsi
index 50c5e8417802..99778b4b7e7b 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-375.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada 375 family SoC
  *
@@ -5,44 +6,6 @@
  *
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -178,9 +141,9 @@
 				reg = <0x8000 0x1000>;
 				cache-unified;
 				cache-level = <2>;
-				arm,double-linefill-incr = <1>;
+				arm,double-linefill-incr = <0>;
 				arm,double-linefill-wrap = <0>;
-				arm,double-linefill = <1>;
+				arm,double-linefill = <0>;
 				prefetch-data = <1>;
 			};
 
@@ -215,6 +178,8 @@
 
 			/* Network controller */
 			ethernet: ethernet@f0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
 				compatible = "marvell,armada-375-pp2";
 				reg = <0xf0000 0xa000>, /* Packet Processor regs */
 				      <0xc0000 0x3060>, /* LMS regs */
@@ -224,15 +189,17 @@
 				clock-names = "pp_clk", "gop_clk";
 				status = "disabled";
 
-				eth0: eth0 {
+				eth0: ethernet-port@0 {
 					interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-					port-id = <0>;
+					reg = <0>;
+					port-id = <0>; /* For backward compatibility. */
 					status = "disabled";
 				};
 
-				eth1: eth1 {
+				eth1: ethernet-port@1 {
 					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-					port-id = <1>;
+					reg = <1>;
+					port-id = <1>; /* For backward compatibility. */
 					status = "disabled";
 				};
 			};
@@ -273,7 +240,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -284,7 +250,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -411,7 +376,6 @@
 				compatible = "marvell,mpic";
 				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 				#interrupt-cells = <1>;
-				#size-cells = <1>;
 				interrupt-controller;
 				msi-controller;
 				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -465,7 +429,7 @@
 				status = "disabled";
 			};
 
-			usb2: usb3@58000 {
+			usb2: usb@58000 {
 				compatible = "marvell,armada-375-xhci";
 				reg = <0x58000 0x20000>,<0x5b880 0x80>;
 				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
@@ -539,11 +503,11 @@
 				status = "disabled";
 			};
 
-			nand: nand@d0000 {
-				compatible = "marvell,armada370-nand";
+			nand_controller: nand-controller@d0000 {
+				compatible = "marvell,armada370-nand-controller";
 				reg = <0xd0000 0x54>;
 				#address-cells = <1>;
-				#size-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gateclk 11>;
 				status = "disabled";
@@ -582,7 +546,7 @@
 			};
 		};
 
-		pciec: pcie-controller@82000000 {
+		pciec: pcie@82000000 {
 			compatible = "marvell,armada-370-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -607,32 +571,54 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie1: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <1>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 		};
diff --git a/arch/arm/boot/dts/marvell/armada-380.dtsi b/arch/arm/boot/dts/marvell/armada-380.dtsi
new file mode 100644
index 000000000000..e94f22b0e9b5
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-380.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 380 SoC.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include "armada-38x.dtsi"
+
+/ {
+	model = "Marvell Armada 380 family SoC";
+	compatible = "marvell,armada380";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-380-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+	};
+
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6810-pinctrl";
+			};
+		};
+
+		pcie {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */>;
+
+			/* x1 port */
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			/* x1 port */
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			/* x1 port */
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
new file mode 100644
index 000000000000..5baf83e5253d
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2021, Marcel Ziswiler <marcel@ziswiler.com> */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Netgear GS110EMX";
+	compatible = "netgear,gs110emx", "marvell,armada380";
+
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet1 = &eth0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&front_button_pins>;
+		pinctrl-names = "default";
+
+		key-factory-default {
+			label = "Factory Default";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>; /* 128 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			rtc@a3800 {
+				/*
+				 * If the rtc doesn't work, run "date reset"
+				 * twice in u-boot.
+				 */
+				status = "okay";
+			};
+		};
+	};
+};
+
+&eth0 {
+	/* ethernet@70000 */
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	fixed-link {
+		full-duplex;
+		pause;
+		speed = <1000>;
+	};
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+
+	ethernet-switch@0 {
+		compatible = "marvell,mv88e6190";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&switch_interrupt_pins>;
+		pinctrl-names = "default";
+		reg = <0>;
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy1: ethernet-phy@1 {
+				reg = <0x1>;
+			};
+
+			switch0phy2: ethernet-phy@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy3: ethernet-phy@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy4: ethernet-phy@4 {
+				reg = <0x4>;
+			};
+
+			switch0phy5: ethernet-phy@5 {
+				reg = <0x5>;
+			};
+
+			switch0phy6: ethernet-phy@6 {
+				reg = <0x6>;
+			};
+
+			switch0phy7: ethernet-phy@7 {
+				reg = <0x7>;
+			};
+
+			switch0phy8: ethernet-phy@8 {
+				reg = <0x8>;
+			};
+		};
+
+		mdio-external {
+			compatible = "marvell,mv88e6xxx-mdio-external";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy1: ethernet-phy@b {
+				reg = <0xb>;
+				compatible = "ethernet-phy-ieee802.3-c45";
+			};
+
+			phy2: ethernet-phy@c {
+				reg = <0xc>;
+				compatible = "ethernet-phy-ieee802.3-c45";
+			};
+		};
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet-port@0 {
+				ethernet = <&eth0>;
+				phy-mode = "rgmii";
+				reg = <0>;
+
+				fixed-link {
+					full-duplex;
+					pause;
+					speed = <1000>;
+				};
+			};
+
+			ethernet-port@1 {
+				label = "lan1";
+				phy-handle = <&switch0phy1>;
+				reg = <1>;
+			};
+
+			ethernet-port@2 {
+				label = "lan2";
+				phy-handle = <&switch0phy2>;
+				reg = <2>;
+			};
+
+			ethernet-port@3 {
+				label = "lan3";
+				phy-handle = <&switch0phy3>;
+				reg = <3>;
+			};
+
+			ethernet-port@4 {
+				label = "lan4";
+				phy-handle = <&switch0phy4>;
+				reg = <4>;
+			};
+
+			ethernet-port@5 {
+				label = "lan5";
+				phy-handle = <&switch0phy5>;
+				reg = <5>;
+			};
+
+			ethernet-port@6 {
+				label = "lan6";
+				phy-handle = <&switch0phy6>;
+				reg = <6>;
+			};
+
+			ethernet-port@7 {
+				label = "lan7";
+				phy-handle = <&switch0phy7>;
+				reg = <7>;
+			};
+
+			ethernet-port@8 {
+				label = "lan8";
+				phy-handle = <&switch0phy8>;
+				reg = <8>;
+			};
+
+			ethernet-port@9 {
+				/* 88X3310P external phy */
+				label = "lan9";
+				phy-handle = <&phy1>;
+				phy-mode = "xaui";
+				reg = <9>;
+			};
+
+			ethernet-port@a {
+				/* 88X3310P external phy */
+				label = "lan10";
+				phy-handle = <&phy2>;
+				phy-mode = "xaui";
+				reg = <0xa>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	front_button_pins: front-button-pins {
+		marvell,pins = "mpp38";
+		marvell,function = "gpio";
+	};
+
+	switch_interrupt_pins: switch-interrupt-pins {
+		marvell,pins = "mpp39";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <3000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "boot";
+				read-only;
+				reg = <0x00000000 0x00100000>;
+			};
+
+			partition@100000 {
+				label = "env";
+				reg = <0x00100000 0x00010000>;
+			};
+
+			partition@200000 {
+				label = "rsv";
+				reg = <0x00110000 0x00010000>;
+			};
+
+			partition@300000 {
+				label = "image0";
+				reg = <0x00120000 0x00900000>;
+			};
+
+			partition@400000 {
+				label = "config";
+				reg = <0x00a20000 0x00300000>;
+			};
+
+			partition@480000 {
+				label = "debug";
+				reg = <0x00d20000 0x002e0000>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-382-rd-ac3x-48g4x2xl.dts b/arch/arm/boot/dts/marvell/armada-382-rd-ac3x-48g4x2xl.dts
new file mode 100644
index 000000000000..6ab65d21861a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-382-rd-ac3x-48g4x2xl.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Marvell Armada 382 reference board
+ * (RD-AC3X-48G4X2XL)
+ *
+ * Copyright (C) 2020 Allied Telesis Labs
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell Armada 382 RD-AC3X";
+	compatible = "marvell,rd-ac3x-48g4x2xl", "marvell,rd-ac3x",
+			 "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &eth1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	eeprom@53 {
+		compatible = "atmel,24c64";
+		reg = <0x53>;
+	};
+
+	/* CPLD device present at 0x3c. Function unknown */
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie1 {
+	/* Port 0, Lane 0 */
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				reg = <0x00000000 0x00500000>;
+				label = "u-boot";
+			};
+			partition@500000 {
+				reg = <0x00500000 0x00400000>;
+				label = "u-boot env";
+			};
+			partition@900000 {
+				reg = <0x00900000 0x3F700000>;
+				label = "user";
+			};
+		};
+	};
+};
+
+&refclk {
+	clock-frequency = <200000000>;
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts b/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts
new file mode 100644
index 000000000000..2fb7304039be
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Armada 385 Allied Telesis x530/GS980MX Board.
+ (x530/AT-GS980MX)
+ *
+ Copyright (C) 2020 Allied Telesis Labs
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "x530/AT-GS980MX";
+	compatible = "alliedtelesis,gs980mx", "alliedtelesis,x530", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x3d) 0 0xf4800000 0x80000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			i2c0: i2c@11000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins>;
+				status = "okay";
+			};
+
+			uart0: serial@12000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_pins>;
+				status = "okay";
+			};
+		};
+	};
+
+	led-7seg {
+		compatible = "gpio-7-segment";
+		segment-gpios = <&led_7seg_gpio 0 GPIO_ACTIVE_LOW>,
+				<&led_7seg_gpio 1 GPIO_ACTIVE_LOW>,
+				<&led_7seg_gpio 2 GPIO_ACTIVE_LOW>,
+				<&led_7seg_gpio 3 GPIO_ACTIVE_LOW>,
+				<&led_7seg_gpio 4 GPIO_ACTIVE_LOW>,
+				<&led_7seg_gpio 5 GPIO_ACTIVE_LOW>,
+				<&led_7seg_gpio 6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+	reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <400000>;
+};
+
+&pcie2 {
+	status = "okay";
+};
+
+&devbus_cs1 {
+	compatible = "marvell,mvebu-devbus";
+	status = "okay";
+
+	devbus,bus-width    = <8>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+
+	nvs@0 {
+		status = "okay";
+
+		compatible = "mtd-ram";
+		reg = <0 0x00080000>;
+		bank-width = <1>;
+		label = "nvs";
+	};
+};
+
+&pinctrl {
+	i2c0_gpio_pins: i2c-gpio-pins-0 {
+		marvell,pins = "mpp2", "mpp3";
+		marvell,function = "gpio";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-1 = <&i2c0_gpio_pins>;
+	scl-gpio = <&gpio0 2 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+	sda-gpio = <&gpio0 3 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+	i2c0mux: mux@71 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nxp,pca9544";
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		i2c@0 { /* POE devices MUX */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			adt7476_2e: hwmon@2e {
+				compatible = "adi,adt7476";
+				reg = <0x2e>;
+			};
+
+			adt7476_2d: hwmon@2d {
+				compatible = "adi,adt7476";
+				reg = <0x2d>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			rtc@68 {
+				compatible = "dallas,ds1340";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			led_7seg_gpio: gpio@20 {
+				compatible = "nxp,pca9554";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x20>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <1>; /* Chip select 1 */
+		spi-max-frequency = <54000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				reg = <0x00000000 0x00100000>;
+				label = "u-boot";
+			};
+			partition@100000 {
+				reg = <0x00100000 0x00040000>;
+				label = "u-boot-env";
+			};
+			partition@140000 {
+				reg = <0x00140000 0x00e80000>;
+				label = "unused";
+			};
+			partition@fc0000 {
+				reg = <0x00fc0000 0x00040000>;
+				label = "idprom";
+			};
+		};
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		marvell,nand-enable-arbiter;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				reg = <0x00000000 0x0f000000>;
+				label = "user";
+			};
+			partition@f000000 {
+				/* Maximum mtdoops size is 8MB, so set to that. */
+				reg = <0x0f000000 0x00800000>;
+				label = "errlog";
+			};
+			partition@f800000 {
+				reg = <0x0f800000 0x00800000>;
+				label = "nand-bbt";
+			};
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
new file mode 100644
index 000000000000..cb85f8e31dfc
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "armada-385-clearfog-gtr.dtsi"
+
+/ {
+	model = "SolidRun Clearfog GTR L8";
+	compatible = "solidrun,clearfog-gtr-l8", "marvell,armada385",
+		     "marvell,armada380";
+
+	/* CON25 */
+	sfp1: sfp-1 {
+		compatible = "sff,sfp";
+		pinctrl-0 = <&cf_gtr_sfp1_pins>;
+		pinctrl-names = "default";
+		i2c-bus = <&i2c0>;
+		mod-def0-gpio = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mdio {
+	switch0: ethernet-switch@4 {
+		compatible = "marvell,mv88e6190";
+		reg = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
+		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet-port@1 {
+				reg = <1>;
+				label = "lan1";
+				phy-handle = <&switch0phy0>;
+			};
+
+			ethernet-port@2 {
+				reg = <2>;
+				label = "lan2";
+				phy-handle = <&switch0phy1>;
+			};
+
+			ethernet-port@3 {
+				reg = <3>;
+				label = "lan3";
+				phy-handle = <&switch0phy2>;
+			};
+
+			ethernet-port@4 {
+				reg = <4>;
+				label = "lan4";
+				phy-handle = <&switch0phy3>;
+			};
+
+			ethernet-port@5 {
+				reg = <5>;
+				label = "lan5";
+				phy-handle = <&switch0phy4>;
+			};
+
+			ethernet-port@6 {
+				reg = <6>;
+				label = "lan6";
+				phy-handle = <&switch0phy5>;
+			};
+
+			ethernet-port@7 {
+				reg = <7>;
+				label = "lan7";
+				phy-handle = <&switch0phy6>;
+			};
+
+			ethernet-port@8 {
+				reg = <8>;
+				label = "lan8";
+				phy-handle = <&switch0phy7>;
+			};
+
+			ethernet-port@9 {
+				reg = <9>;
+				label = "lan-sfp";
+				phy-mode = "sgmii";
+				sfp = <&sfp1>;
+				managed = "in-band-status";
+			};
+
+			ethernet-port@10 {
+				reg = <10>;
+				phy-mode = "2500base-x";
+				ethernet = <&eth1>;
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+				};
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: ethernet-phy@1 {
+				reg = <0x1>;
+			};
+
+			switch0phy1: ethernet-phy@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy2: ethernet-phy@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy3: ethernet-phy@4 {
+				reg = <0x4>;
+			};
+
+			switch0phy4: ethernet-phy@5 {
+				reg = <0x5>;
+			};
+
+			switch0phy5: ethernet-phy@6 {
+				reg = <0x6>;
+			};
+
+			switch0phy6: ethernet-phy@7 {
+				reg = <0x7>;
+			};
+
+			switch0phy7: ethernet-phy@8 {
+				reg = <0x8>;
+			};
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
new file mode 100644
index 000000000000..5f83d981449a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "armada-385-clearfog-gtr.dtsi"
+
+/ {
+	model = "SolidRun Clearfog GTR S4";
+	compatible = "solidrun,clearfog-gtr-s4", "marvell,armada385",
+		     "marvell,armada380";
+};
+
+&sfp0 {
+	tx-fault-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+};
+
+&mdio {
+	switch0: ethernet-switch@4 {
+		compatible = "marvell,mv88e6085";
+		reg = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
+		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet-port@1 {
+				reg = <1>;
+				label = "lan2";
+				phy-handle = <&switch0phy0>;
+			};
+
+			ethernet-port@2 {
+				reg = <2>;
+				label = "lan1";
+				phy-handle = <&switch0phy1>;
+			};
+
+			ethernet-port@3 {
+				reg = <3>;
+				label = "lan4";
+				phy-handle = <&switch0phy2>;
+			};
+
+			ethernet-port@4 {
+				reg = <4>;
+				label = "lan3";
+				phy-handle = <&switch0phy3>;
+			};
+
+			ethernet-port@5 {
+				reg = <5>;
+				phy-mode = "2500base-x";
+				ethernet = <&eth1>;
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+				};
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: ethernet-phy@11 {
+				reg = <0x11>;
+			};
+
+			switch0phy1: ethernet-phy@12 {
+				reg = <0x12>;
+			};
+
+			switch0phy2: ethernet-phy@13 {
+				reg = <0x13>;
+			};
+
+			switch0phy3: ethernet-phy@14 {
+				reg = <0x14>;
+			};
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
new file mode 100644
index 000000000000..7aa71a9aa1bb
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
@@ -0,0 +1,492 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Clearfog GTR machines rev 1.0 (88F6825)
+ *
+ *  Rabeeh Khoury <rabeeh@solid-run.com>, based on Russell King clearfog work
+ */
+
+/*
+	SERDES mapping -
+	0. SATA1 on CON18, or optionally mini PCIe CON3 - PCIe0
+	1. 6141 switch (2.5Gbps capable)
+	2. SATA0 on CON17, or optionally mini PCIe CON4 - PCIe1
+	3. USB 3.0 Host
+	4. mini PCIe CON2 - PCIe2
+	5. SFP connector, or optionally SGMII Ethernet 1512 PHY
+
+	USB 2.0 mapping -
+	0. USB 2.0 - 0 USB pins header CON12
+	1. USB 2.0 - 1 mini PCIe CON2
+	2. USB 2.0 - 2 to USB 3.0 connector (used with SERDES #3)
+
+	Pin mapping -
+	0,1 - console UART
+	2,3 - I2C0 - connected to I2C EEPROM, two temperature sensors,
+	      front panel and PSE controller
+	4,5 - MDC/MDIO
+	6..17 - RGMII
+	18 - Topaz switch reset (active low)
+	19 - 1512 phy reset
+	20 - 1512 phy reset (eth2, optional)
+	21,28,37,38,39,40 - SD0
+	22 - USB 3.0 current limiter enable (active high)
+	24 - SFP TX fault (input active high)
+	25 - SFP present (input active low)
+	26,27 - I2C1 - connected to SFP
+	29 - Fan PWM
+	30 - CON4 mini PCIe wifi disable
+	31 - CON3 mini PCIe wifi disable
+	32 - Fuse programming power toggle (1.8v)
+	33 - CON4 mini PCIe reset
+	34 - CON2 mini PCIe wifi disable
+	35 - CON3 mini PCIe reset
+	36 - Rear button (GPIO active low)
+	41 - CON1 front panel connector
+	42 - Front LED1, or front panel CON1
+	43 - Micron L-PBGA 24 ball SPI (1Gb) CS, or TPM SPI CS
+	44 - CON2 mini PCIe reset
+	45 - TPM PIRQ signal, or front panel CON1
+	46 - SFP TX disable
+	47 - Control isolation of boot sensitive SAR signals
+	48 - PSE reset
+	49 - PSE OSS signal
+	50 - PSE interrupt
+	52 - Front LED2, or front panel
+	53 - Front button
+	54 - SFP LOS (input active high)
+	55 - Fan sense
+	56(mosi),57(clk),58(miso) - SPI interface - 32Mb SPI, 1Gb SPI and TPM
+	59 - SPI 32Mb W25Q32BVZPIG CS0 chip select (bootable)
+*/
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-385.dtsi"
+
+/ {
+	compatible = "marvell,armada385", "marvell,armada380";
+
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet1 = &eth0;
+		ethernet2 = &eth1;
+		ethernet3 = &eth2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	v_usb3_con: regulator-v-usb3-con {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_usb3_con_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb3_con";
+		vin-supply = <&reg_5p0v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+
+			rtc@a3800 {
+				status = "okay";
+			};
+
+			i2c@11000 { /* ROM, temp sensor and front panel */
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			i2c@11100 { /* SFP (CON5/CON6) */
+				pinctrl-0 = <&cf_gtr_i2c1_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			pinctrl@18000 {
+				cf_gtr_fan_pwm: cf-gtr-fan-pwm {
+					marvell,pins = "mpp23";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_front_button_pins: cf-gtr-front-button-pins {
+					marvell,pins = "mpp53";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_i2c1_pins: i2c1-pins {
+					/* SFP */
+					marvell,pins = "mpp26", "mpp27";
+					marvell,function = "i2c1";
+				};
+
+				cf_gtr_isolation_pins: cf-gtr-isolation-pins {
+					marvell,pins = "mpp47";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_led_pins: led-pins {
+					marvell,pins = "mpp42", "mpp52";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_lte_disable_pins: lte-disable-pins {
+					marvell,pins = "mpp34";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_pci_pins: pci-pins {
+					// pci reset
+					marvell,pins = "mpp33", "mpp35", "mpp44";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_poe_reset_pins: cf-gtr-poe-reset-pins {
+					marvell,pins = "mpp48";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_rear_button_pins: cf-gtr-rear-button-pins {
+					marvell,pins = "mpp36";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_sdhci_pins: cf-gtr-sdhci-pins {
+					marvell,pins = "mpp21", "mpp28",
+						       "mpp37", "mpp38",
+						       "mpp39", "mpp40";
+					marvell,function = "sd0";
+				};
+
+				cf_gtr_sfp0_pins: sfp0-pins {
+					/* sfp modabs, txdisable */
+					marvell,pins = "mpp25", "mpp46";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_sfp1_pins: sfp1-pins {
+					/* sfp modabs, txdisable */
+					marvell,pins = "mpp24", "mpp54";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_spi1_cs_pins: spi1-cs-pins {
+					marvell,pins = "mpp59";
+					marvell,function = "spi1";
+				};
+
+				cf_gtr_switch_reset_pins: cf-gtr-switch-reset-pins {
+					marvell,pins = "mpp18";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_usb3_con_vbus: cf-gtr-usb3-con-vbus {
+					marvell,pins = "mpp22";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_wifi_disable_pins: wifi-disable-pins {
+					marvell,pins = "mpp30", "mpp31";
+					marvell,function = "gpio";
+				};
+			};
+
+			sdhci@d8000 {
+				bus-width = <4>;
+				no-1-8-v;
+				non-removable;
+				pinctrl-0 = <&cf_gtr_sdhci_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				vmmc = <&reg_3p3v>;
+				wp-inverted;
+			};
+
+			usb@58000 {
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				vbus-supply = <&v_usb3_con>;
+				status = "okay";
+			};
+		};
+
+		pcie {
+			pinctrl-0 = <&cf_gtr_pci_pins>;
+			pinctrl-names = "default";
+			status = "okay";
+			/*
+			 * The PCIe units are accessible through
+			 * the mini-PCIe connectors on the board.
+			 */
+			/* CON3 - serdes 0 */
+			pcie@1,0 {
+				reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+
+			/* CON4 - serdes 2 */
+			pcie@2,0 {
+				reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+
+			/* CON2 - serdes 4 */
+			pcie@3,0 {
+				reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+		};
+	};
+
+	/* CON5 */
+	sfp0: sfp-0 {
+		compatible = "sff,sfp";
+		pinctrl-0 = <&cf_gtr_sfp0_pins>;
+		pinctrl-names = "default";
+		i2c-bus = <&i2c1>;
+		mod-def0-gpio = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&cf_gtr_rear_button_pins &cf_gtr_front_button_pins>;
+		pinctrl-names = "default";
+
+		button-0 {
+			label = "Rear Button";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+
+		button-1 {
+			label = "Front Button";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_1>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&cf_gtr_led_pins>;
+		pinctrl-names = "default";
+
+		led1 {
+			function = LED_FUNCTION_CPU;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led2 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&bm {
+	status = "okay";
+};
+
+&bm_bppi {
+	status = "okay";
+};
+
+&eth0 {
+	/* ethernet@70000 */
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	pinctrl-names = "default";
+	phy = <&phy_dedicated>;
+	phy-mode = "rgmii-id";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+	status = "okay";
+};
+
+&eth1 {
+	/* ethernet@30000 */
+	bm,pool-long = <2>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	phys = <&comphy1 1>;
+	phy-mode = "2500base-x";
+	status = "okay";
+
+	fixed-link {
+		speed = <2500>;
+		full-duplex;
+	};
+};
+
+&eth2 {
+	/* ethernet@34000 */
+	bm,pool-long = <3>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	managed = "in-band-status";
+	phys = <&comphy5 1>;
+	phy-mode = "sgmii";
+	sfp = <&sfp0>;
+	status = "okay";
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+
+	phy_dedicated: ethernet-phy@0 {
+		/*
+		 * Annoyingly, the marvell phy driver configures the LED
+		 * register, rather than preserving reset-loaded setting.
+		 * We undo that rubbish here.
+		 */
+		marvell,reg-init = <3 16 0 0x1017>;
+		reg = <0>;
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spi1 {
+	/*
+	 * CS0: W25Q32 flash
+	 */
+	pinctrl-0 = <&spi1_pins &cf_gtr_spi1_cs_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <3000000>;
+		status = "okay";
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* U26 temperature sensor placed near SoC */
+	temp1: temperature-sensor@4c {
+		compatible = "ti,tmp75c";
+		reg = <0x4c>;
+	};
+
+	/* U27 temperature sensor placed near RTC battery */
+	temp2: temperature-sensor@4d {
+		compatible = "ti,tmp75c";
+		reg = <0x4d>;
+	};
+
+	/* 2Kb eeprom */
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+	};
+};
+
+&ahci0 {
+	status = "okay";
+};
+
+&ahci1 {
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-0 = <&cf_gtr_fan_pwm &cf_gtr_wifi_disable_pins>;
+	pinctrl-names = "default";
+
+	wifi-disable-hog {
+		gpio-hog;
+		gpios = <30 GPIO_ACTIVE_LOW>, <31 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "wifi-disable";
+	};
+};
+
+&gpio1 {
+	pinctrl-0 = <&cf_gtr_isolation_pins &cf_gtr_poe_reset_pins &cf_gtr_lte_disable_pins>;
+	pinctrl-names = "default";
+
+	lte-disable-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "lte-disable";
+	};
+
+	/*
+	 * This signal, when asserted, isolates Armada 38x sample at reset pins
+	 * from control of external devices. Should be de-asserted after reset.
+	 */
+	sar-isolation-hog {
+		gpio-hog;
+		gpios = <15 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "sar-isolation";
+	};
+
+	poe-reset-hog {
+		gpio-hog;
+		gpios = <16 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "poe-reset";
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385-db-88f6820-amc.dts b/arch/arm/boot/dts/marvell/armada-385-db-88f6820-amc.dts
new file mode 100644
index 000000000000..389d9c75d546
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-db-88f6820-amc.dts
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Marvell Armada 385 AMC board
+ * (DB-88F6820-AMC)
+ *
+ * Copyright (C) 2017 Allied Telesis Labs
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell Armada 385 AMC";
+	compatible = "marvell,a385-db-amc", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		spi1 = &spi1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
+
+&uart0 {
+	/*
+	 * Exported on the micro USB connector CON3
+	 * through an FTDI
+	 */
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+
+&eth0 {
+	pinctrl-names = "default";
+	/*
+	 * The Reference Clock 0 is used to provide a
+	 * clock to the PHY
+	 */
+	pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&eth2 {
+	status = "okay";
+	phy = <&phy1>;
+	phy-mode = "sgmii";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+
+	phy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	phy1: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				reg = <0x00000000 0x40000000>;
+				label = "user";
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie1 {
+	/* Port 0, Lane 0 */
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				reg = <0x00000000 0x00100000>;
+				label = "u-boot";
+			};
+			partition@100000 {
+				reg = <0x00100000 0x00040000>;
+				label = "u-boot-env";
+			};
+		};
+	};
+};
+
+&refclk {
+	clock-frequency = <20000000>;
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385-db-ap.dts b/arch/arm/boot/dts/marvell/armada-385-db-ap.dts
new file mode 100644
index 000000000000..332f8fce77dc
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-db-ap.dts
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Marvell Armada 385 Access Point Development board
+ * (DB-88F6820-AP)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Nadav Haklai <nadavh@marvell.com>
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell Armada 385 Access Point Development Board";
+	compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			i2c0: i2c@11000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins>;
+				status = "okay";
+
+				/*
+				 * This bus is wired to two EEPROM
+				 * sockets, one of which holding the
+				 * board ID used by the	bootloader.
+				 * Erasing this EEPROM's content will
+				 * brick the board.
+				 * Use this bus with caution.
+				 */
+			};
+
+			mdio@72004 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&mdio_pins>;
+
+				phy0: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy1: ethernet-phy@4 {
+					reg = <4>;
+				};
+
+				phy2: ethernet-phy@6 {
+					reg = <6>;
+				};
+			};
+
+			/* UART0 is exposed through the JP8 connector */
+			uart0: serial@12000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_pins>;
+				status = "okay";
+			};
+
+			/*
+			 * UART1 is exposed through a FTDI chip
+			 * wired to the mini-USB connector
+			 */
+			uart1: serial@12100 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_pins>;
+				status = "okay";
+			};
+
+			pinctrl@18000 {
+				xhci0_vbus_pins: xhci0-vbus-pins {
+					marvell,pins = "mpp44";
+					marvell,function = "gpio";
+				};
+			};
+
+			/* CON3 */
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
+				bm,pool-short = <3>;
+			};
+
+			/* CON2 */
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
+			};
+
+			usb@58000 {
+				status = "okay";
+			};
+
+			/* CON4 */
+			ethernet@70000 {
+				pinctrl-names = "default";
+
+				/*
+				 * The Reference Clock 0 is used to
+				 * provide a clock to the PHY
+				 */
+				pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <3>;
+			};
+
+			bm@c8000 {
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				status = "okay";
+				usb-phy = <&usb3_phy>;
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+
+		pcie {
+			status = "okay";
+
+			/*
+			 * The three PCIe units are accessible through
+			 * standard mini-PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+
+			pcie@3,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+
+	usb3_phy: usb3_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_xhci0_vbus>;
+		#phy-cells = <0>;
+	};
+
+	reg_xhci0_vbus: xhci0-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&xhci0_vbus_pins>;
+		regulator-name = "xhci0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <54000000>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x00000000 0x00800000>;
+				read-only;
+			};
+
+			partition@800000 {
+				label = "uImage";
+				reg = <0x00800000 0x00400000>;
+				read-only;
+			};
+
+			partition@c00000 {
+				label = "Root";
+				reg = <0x00c00000 0x3f400000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/marvell/armada-385-linksys-caiman.dts
new file mode 100644
index 000000000000..88b2921fed55
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys-caiman.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree include for the Linksys WRT1200AC (Caiman)
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ */
+
+/dts-v1/;
+#include "armada-385-linksys.dtsi"
+
+/ {
+	model = "Linksys WRT1200AC";
+	compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385",
+		     "marvell,armada380";
+};
+
+&expander0 {
+	wan_amber@0 {
+		label = "caiman:amber:wan";
+		reg = <0x0>;
+	};
+
+	wan_white@1 {
+		label = "caiman:white:wan";
+		reg = <0x1>;
+	};
+
+	wlan_2g@2 {
+		label = "caiman:white:wlan_2g";
+		reg = <0x2>;
+	};
+
+	wlan_5g@3 {
+		label = "caiman:white:wlan_5g";
+		reg = <0x3>;
+	};
+
+	usb2@5 {
+		label = "caiman:white:usb2";
+		reg = <0x5>;
+	};
+
+	usb3_1@6 {
+		label = "caiman:white:usb3_1";
+		reg = <0x6>;
+	};
+
+	usb3_2@7 {
+		label = "caiman:white:usb3_2";
+		reg = <0x7>;
+	};
+
+	wps_white@8 {
+		label = "caiman:white:wps";
+		reg = <0x8>;
+	};
+
+	wps_amber@9 {
+		label = "caiman:amber:wps";
+		reg = <0x9>;
+	};
+};
+
+&gpio_leds {
+	led-power {
+		label = "caiman:white:power";
+	};
+
+	led-sata {
+		label = "caiman:white:sata";
+	};
+};
+
+&nand {
+	/* 128MiB */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0000000 0x200000>;  /* 2MiB */
+			read-only;
+		};
+
+		partition@100000 {
+			label = "u_env";
+			reg = <0x200000 0x40000>;    /* 256KiB */
+		};
+
+		partition@140000 {
+			label = "s_env";
+			reg = <0x240000 0x40000>;    /* 256KiB */
+		};
+
+		partition@900000 {
+			label = "devinfo";
+			reg = <0x900000 0x100000>;   /* 1MiB */
+			read-only;
+		};
+
+		/* kernel1 overlaps with rootfs1 by design */
+		partition@a00000 {
+			label = "kernel1";
+			reg = <0xa00000 0x2800000>;  /* 40MiB */
+		};
+
+		partition@1000000 {
+			label = "rootfs1";
+			reg = <0x1000000 0x2200000>;  /* 34MiB */
+		};
+
+		/* kernel2 overlaps with rootfs2 by design */
+		partition@3200000 {
+			label = "kernel2";
+			reg = <0x3200000 0x2800000>; /* 40MiB */
+		};
+
+		partition@3800000 {
+			label = "rootfs2";
+			reg = <0x3800000 0x2200000>; /* 34MiB */
+		};
+
+		/*
+		 * 38MiB, last MiB is for the BBT, not writable
+		 */
+		partition@5a00000 {
+			label = "syscfg";
+			reg = <0x5a00000 0x2600000>;
+		};
+
+		/*
+		 * Unused area between "s_env" and "devinfo".
+		 * Moved here because otherwise the renumbered
+		 * partitions would break the bootloader
+		 * supplied bootargs
+		 */
+		partition@180000 {
+			label = "unused_area";
+			reg = <0x280000 0x680000>;   /* 6.5MiB */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/marvell/armada-385-linksys-cobra.dts
new file mode 100644
index 000000000000..88200f930d0d
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys-cobra.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for the Linksys WRT1900ACv2 (Cobra)
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ */
+
+/dts-v1/;
+#include "armada-385-linksys.dtsi"
+
+/ {
+	model = "Linksys WRT1900ACv2";
+	compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385",
+		     "marvell,armada380";
+};
+
+&expander0 {
+	wan_amber@0 {
+		label = "cobra:amber:wan";
+		reg = <0x0>;
+	};
+
+	wan_white@1 {
+		label = "cobra:white:wan";
+		reg = <0x1>;
+	};
+
+	wlan_2g@2 {
+		label = "cobra:white:wlan_2g";
+		reg = <0x2>;
+	};
+
+	wlan_5g@3 {
+		label = "cobra:white:wlan_5g";
+		reg = <0x3>;
+	};
+
+	usb2@5 {
+		label = "cobra:white:usb2";
+		reg = <0x5>;
+	};
+
+	usb3_1@6 {
+		label = "cobra:white:usb3_1";
+		reg = <0x6>;
+	};
+
+	usb3_2@7 {
+		label = "cobra:white:usb3_2";
+		reg = <0x7>;
+	};
+
+	wps_white@8 {
+		label = "cobra:white:wps";
+		reg = <0x8>;
+	};
+
+	wps_amber@9 {
+		label = "cobra:amber:wps";
+		reg = <0x9>;
+	};
+};
+
+&gpio_leds {
+	led-power {
+		label = "cobra:white:power";
+	};
+
+	led-sata {
+		label = "cobra:white:sata";
+	};
+};
+
+&nand {
+	/* 128MiB */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0000000 0x200000>;  /* 2MiB */
+			read-only;
+		};
+
+		partition@100000 {
+			label = "u_env";
+			reg = <0x200000 0x40000>;    /* 256KiB */
+		};
+
+		partition@140000 {
+			label = "s_env";
+			reg = <0x240000 0x40000>;    /* 256KiB */
+		};
+
+		partition@900000 {
+			label = "devinfo";
+			reg = <0x900000 0x100000>;   /* 1MiB */
+			read-only;
+		};
+
+		/* kernel1 overlaps with rootfs1 by design */
+		partition@a00000 {
+			label = "kernel1";
+			reg = <0xa00000 0x2800000>;  /* 40MiB */
+		};
+
+		partition@1000000 {
+			label = "rootfs1";
+			reg = <0x1000000 0x2200000>;  /* 34MiB */
+		};
+
+		/* kernel2 overlaps with rootfs2 by design */
+		partition@3200000 {
+			label = "kernel2";
+			reg = <0x3200000 0x2800000>; /* 40MiB */
+		};
+
+		partition@3800000 {
+			label = "rootfs2";
+			reg = <0x3800000 0x2200000>; /* 34MiB */
+		};
+
+		/*
+		 * 38MiB, last MiB is for the BBT, not writable
+		 */
+		partition@5a00000 {
+			label = "syscfg";
+			reg = <0x5a00000 0x2600000>;
+		};
+
+		/*
+		 * Unused area between "s_env" and "devinfo".
+		 * Moved here because otherwise the renumbered
+		 * partitions would break the bootloader
+		 * supplied bootargs
+		 */
+		partition@180000 {
+			label = "unused_area";
+			reg = <0x280000 0x680000>;   /* 6.5MiB */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385-linksys-rango.dts b/arch/arm/boot/dts/marvell/armada-385-linksys-rango.dts
new file mode 100644
index 000000000000..4ab45f294de2
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys-rango.dts
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for the Linksys WRT3200ACM (Rango)
+ *
+ * Copyright (C) 2016 Imre Kaloz <kaloz@openwrt.org>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-385-linksys.dtsi"
+
+/ {
+	model = "Linksys WRT3200ACM";
+	compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
+		     "marvell,armada380";
+};
+
+&expander0 {
+	wan_amber@0 {
+		label = "rango:amber:wan";
+		reg = <0x0>;
+	};
+
+	wan_white@1 {
+		label = "rango:white:wan";
+		reg = <0x1>;
+	};
+
+	usb2@5 {
+		label = "rango:white:usb2";
+		reg = <0x5>;
+	};
+
+	usb3_1@6 {
+		label = "rango:white:usb3_1";
+		reg = <0x6>;
+	};
+
+	usb3_2@7 {
+		label = "rango:white:usb3_2";
+		reg = <0x7>;
+	};
+
+	wps_white@8 {
+		label = "rango:white:wps";
+		reg = <0x8>;
+	};
+
+	wps_amber@9 {
+		label = "rango:amber:wps";
+		reg = <0x9>;
+	};
+};
+
+&gpio_leds {
+	led-power {
+		gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+		label = "rango:white:power";
+	};
+
+	led-sata {
+		gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		label = "rango:white:sata";
+	};
+
+	led-wlan_2g {
+		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		label = "rango:white:wlan_2g";
+	};
+
+	led-wlan_5g {
+		gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		label = "rango:white:wlan_5g";
+	};
+};
+
+&gpio_leds_pins {
+	marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56";
+};
+
+&nand {
+	/* AMD/Spansion S34ML02G2 256MiB, OEM Layout */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0000000 0x200000>;  /* 2MiB */
+			read-only;
+		};
+
+		partition@200000 {
+			label = "u_env";
+			reg = <0x200000 0x20000>;    /* 128KiB */
+		};
+
+		partition@220000 {
+			label = "s_env";
+			reg = <0x220000 0x40000>;    /* 256KiB */
+		};
+
+		partition@7e0000 {
+			label = "devinfo";
+			reg = <0x7e0000 0x40000>;   /* 256KiB */
+			read-only;
+		};
+
+		partition@820000 {
+			label = "sysdiag";
+			reg = <0x820000 0x1e0000>;   /* 1920KiB */
+			read-only;
+		};
+
+		/* kernel1 overlaps with rootfs1 by design */
+		partition@a00000 {
+			label = "kernel1";
+			reg = <0xa00000 0x5000000>;  /* 80MiB */
+		};
+
+		partition@1000000 {
+			label = "rootfs1";
+			reg = <0x1000000 0x4a00000>;  /* 74MiB */
+		};
+
+		/* kernel2 overlaps with rootfs2 by design */
+		partition@5a00000 {
+			label = "kernel2";
+			reg = <0x5a00000 0x5000000>; /* 80MiB */
+		};
+
+		partition@6000000 {
+			label = "rootfs2";
+			reg = <0x6000000 0x4a00000>; /* 74MiB */
+		};
+
+		/*
+		 * 86MiB, last MiB is for the BBT, not writable
+		 */
+		partition@aa00000 {
+			label = "syscfg";
+			reg = <0xaa00000 0x5600000>;
+		};
+
+		/*
+		 * Unused area between "s_env" and "devinfo".
+		 * Moved here because otherwise the renumbered
+		 * partitions would break the bootloader
+		 * supplied bootargs
+		 */
+		partition@180000 {
+			label = "unused_area";
+			reg = <0x260000 0x5c0000>;   /* 5.75MiB */
+		};
+	};
+};
+
+&sdhci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhci_pins>;
+	no-1-8-v;
+	non-removable;
+	wp-inverted;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&usb3_1_vbus {
+	gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_1_vbus_pins {
+	marvell,pins = "mpp44";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/marvell/armada-385-linksys-shelby.dts
new file mode 100644
index 000000000000..f1b1f22413f1
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys-shelby.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for the Linksys WRT1900ACS (Shelby)
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ */
+
+/dts-v1/;
+#include "armada-385-linksys.dtsi"
+
+/ {
+	model = "Linksys WRT1900ACS";
+	compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
+		     "marvell,armada380";
+};
+
+&expander0 {
+	wan_amber@0 {
+		label = "shelby:amber:wan";
+		reg = <0x0>;
+	};
+
+	wan_white@1 {
+		label = "shelby:white:wan";
+		reg = <0x1>;
+	};
+
+	wlan_2g@2 {
+		label = "shelby:white:wlan_2g";
+		reg = <0x2>;
+	};
+
+	wlan_5g@3 {
+		label = "shelby:white:wlan_5g";
+		reg = <0x3>;
+	};
+
+	usb2@5 {
+		label = "shelby:white:usb2";
+		reg = <0x5>;
+	};
+
+	usb3_1@6 {
+		label = "shelby:white:usb3_1";
+		reg = <0x6>;
+	};
+
+	usb3_2@7 {
+		label = "shelby:white:usb3_2";
+		reg = <0x7>;
+	};
+
+	wps_white@8 {
+		label = "shelby:white:wps";
+		reg = <0x8>;
+	};
+
+	wps_amber@9 {
+		label = "shelby:amber:wps";
+		reg = <0x9>;
+	};
+};
+
+&gpio_leds {
+	led-power {
+		label = "shelby:white:power";
+	};
+
+	led-sata {
+		label = "shelby:white:sata";
+	};
+};
+
+&nand {
+	/* 128MiB */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0000000 0x200000>;  /* 2MiB */
+			read-only;
+		};
+
+		partition@100000 {
+			label = "u_env";
+			reg = <0x200000 0x40000>;    /* 256KiB */
+		};
+
+		partition@140000 {
+			label = "s_env";
+			reg = <0x240000 0x40000>;    /* 256KiB */
+		};
+
+		partition@900000 {
+			label = "devinfo";
+			reg = <0x900000 0x100000>;   /* 1MiB */
+			read-only;
+		};
+
+		/* kernel1 overlaps with rootfs1 by design */
+		partition@a00000 {
+			label = "kernel1";
+			reg = <0xa00000 0x2800000>;  /* 40MiB */
+		};
+
+		partition@1000000 {
+			label = "rootfs1";
+			reg = <0x1000000 0x2200000>;  /* 34MiB */
+		};
+
+		/* kernel2 overlaps with rootfs2 by design */
+		partition@3200000 {
+			label = "kernel2";
+			reg = <0x3200000 0x2800000>; /* 40MiB */
+		};
+
+		partition@3800000 {
+			label = "rootfs2";
+			reg = <0x3800000 0x2200000>; /* 34MiB */
+		};
+
+		/*
+		 * 38MiB, last MiB is for the BBT, not writable
+		 */
+		partition@5a00000 {
+			label = "syscfg";
+			reg = <0x5a00000 0x2600000>;
+		};
+
+		/*
+		 * Unused area between "s_env" and "devinfo".
+		 * Moved here because otherwise the renumbered
+		 * partitions would break the bootloader
+		 * supplied bootargs
+		 */
+		partition@180000 {
+			label = "unused_area";
+			reg = <0x280000 0x680000>;   /* 6.5MiB */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
new file mode 100644
index 000000000000..4116ed60f709
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree include file for Armada 385 based Linksys boards
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-385.dtsi"
+
+/ {
+	model = "Linksys boards based on Armada 385";
+	compatible = "linksys,armada385", "marvell,armada385",
+		     "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MiB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+	};
+
+	usb3_1_phy: usb3_1-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&usb3_1_vbus>;
+		#phy-cells = <0>;
+	};
+
+	usb3_1_vbus: usb3_1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_1_vbus_pins>;
+		regulator-name = "usb3_1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&gpio_keys_pins>;
+		pinctrl-names = "default";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		button-reset {
+			label = "Factory Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&gpio_leds_pins>;
+		pinctrl-names = "default";
+
+		led-power {
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-sata {
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "disk-activity";
+		};
+	};
+};
+
+&ahci0 {
+	status = "okay";
+};
+
+&bm {
+	status = "okay";
+};
+
+&bm_bppi {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&eth2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	buffer-manager = <&bm>;
+	bm,pool-long = <2>;
+	bm,pool-short = <3>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+
+	expander0: pca9635@68 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nxp,pca9635";
+		reg = <0x68>;
+	};
+};
+
+&nand_controller {
+	/* 128MiB or 256MiB */
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	nand: nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethernet-switch@0 {
+		compatible = "marvell,mv88e6085";
+		reg = <0>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet-port@0 {
+				reg = <0>;
+				label = "lan4";
+			};
+
+			ethernet-port@1 {
+				reg = <1>;
+				label = "lan3";
+			};
+
+			ethernet-port@2 {
+				reg = <2>;
+				label = "lan2";
+			};
+
+			ethernet-port@3 {
+				reg = <3>;
+				label = "lan1";
+			};
+
+			ethernet-port@4 {
+				reg = <4>;
+				label = "wan";
+			};
+
+			ethernet-port@5 {
+				reg = <5>;
+				phy-mode = "sgmii";
+				ethernet = <&eth2>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie1 {
+	/* Marvell 88W8864, 5GHz-only */
+	status = "okay";
+};
+
+&pcie2 {
+	/* Marvell 88W8864, 2GHz-only */
+	status = "okay";
+};
+
+&pinctrl {
+	gpio_keys_pins: gpio-keys-pins {
+		/* mpp24: wps, mpp29: reset */
+		marvell,pins = "mpp24", "mpp29";
+		marvell,function = "gpio";
+	};
+
+	gpio_leds_pins: gpio-leds-pins {
+		/* mpp54: sata, mpp55: power */
+		marvell,pins = "mpp54", "mpp55";
+		marvell,function = "gpio";
+	};
+
+	usb3_1_vbus_pins: usb3_1-vbus-pins {
+		marvell,pins = "mpp50";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	status = "disabled";
+};
+
+&uart0 {
+	/* J10: VCC, NC, RX, NC, TX, GND  */
+	status = "okay";
+};
+
+&usb0 {
+	/* USB part of the eSATA/USB 2.0 port */
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+	usb-phy = <&usb3_1_phy>;
+};
+
+&rtc {
+	/* No crystal connected to the internal RTC */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts
index 31510eb56f10..6caa5c50175a 100644
--- a/arch/arm/boot/dts/armada-385-synology-ds116.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts
@@ -1,39 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 /*
  * Device Tree file for Synology DS116 NAS
  *
  * Copyright (C) 2017 Willy Tarreau <w@1wt.eu>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -162,15 +131,15 @@
 			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>,
 				<&gpio1 17 GPIO_ACTIVE_HIGH>,
 				<&gpio1 16 GPIO_ACTIVE_HIGH>;
-			gpio-fan,speed-map = <   0 0
-					      1500 1
-					      2500 2
-					      3000 3
-					      3400 4
-					      3700 5
-					      3900 6
-					      4000 7>;
-			cooling-cells = <2>;
+			gpio-fan,speed-map = <   0 0>,
+					     <1500 1>,
+					     <2500 2>,
+					     <3000 3>,
+					     <3400 4>,
+					     <3700 5>,
+					     <3900 6>,
+					     <4000 7>;
+			#cooling-cells = <2>;
 		};
 
 		gpio-leds {
@@ -180,7 +149,7 @@
 			 * sata0, and accesses to SATA disk 0 make it blink so it
 			 * doesn't need to be declared here.
 			 */
-			orange {
+			led-orange {
 				gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 				label = "ds116:orange:disk";
 				default-state = "off";
@@ -191,11 +160,13 @@
 	usb3_0_phy: usb3_0_phy {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&reg_usb3_0_vbus>;
+		#phy-cells = <0>;
 	};
 
 	usb3_1_phy: usb3_1_phy {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&reg_usb3_1_vbus>;
+		#phy-cells = <0>;
 	};
 
 	reg_usb3_0_vbus: usb3-vbus0 {
@@ -252,7 +223,7 @@
 	pinctrl-0 = <&spi0_pins>;
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "macronix,mx25l6405d", "jedec,spi-nor";
@@ -267,35 +238,35 @@
 		 * enumerated. The MAC address and the serial number are listed
 		 * in the "vendor" partition.
 		 */
-		partition@00000000 {
+		partition@0 {
 			label = "RedBoot";
 			reg = <0x00000000 0x000f0000>;
 			read-only;
 		};
 
-		partition@000c0000 {
+		partition@c0000 {
 			label = "zImage";
 			reg = <0x000f0000 0x002d0000>;
 		};
 
-		partition@00390000 {
+		partition@390000 {
 			label = "rd.gz";
 			reg = <0x003c0000 0x00410000>;
 		};
 
-		partition@007d0000 {
+		partition@7d0000 {
 			label = "vendor";
 			reg = <0x007d0000 0x00010000>;
 			read-only;
 		};
 
-		partition@007e0000 {
+		partition@7e0000 {
 			label = "RedBoot config";
 			reg = <0x007e0000 0x00010000>;
 			read-only;
 		};
 
-		partition@007f0000 {
+		partition@7f0000 {
 			label = "FIS directory";
 			reg = <0x007f0000 0x00010000>;
 			read-only;
diff --git a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
new file mode 100644
index 000000000000..83fe00abd652
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
@@ -0,0 +1,603 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for the Turris Omnia
+ *
+ * Copyright (C) 2016 Uwe Kleine-König <uwe@kleine-koenig.org>
+ * Copyright (C) 2016 Tomas Hlavacek <tmshlvkc@gmail.com>
+ *
+ * Schematic available at https://www.turris.cz/doc/_media/rtrom01-schema.pdf
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-385.dtsi"
+
+/ {
+	model = "Turris Omnia";
+	compatible = "cznic,turris-omnia", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1024 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+
+			/* USB part of the PCIe2/USB 2.0 port */
+			usb@58000 {
+				status = "okay";
+			};
+
+			sata@a8000 {
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sdhci_pins>;
+				status = "okay";
+
+				bus-width = <8>;
+				no-1-8-v;
+				non-removable;
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+				slot-power-limit-milliwatt = <10000>;
+			};
+
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+				slot-power-limit-milliwatt = <10000>;
+			};
+
+			pcie@3,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+				slot-power-limit-milliwatt = <10000>;
+			};
+		};
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp_i2c>;
+		tx-fault-gpios = <&pcawan 0 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&pcawan 1 GPIO_ACTIVE_HIGH>;
+		rate-select0-gpios = <&pcawan 2 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&pcawan 3 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&pcawan 4 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <3000>;
+
+		/*
+		 * For now this has to be enabled at boot time by U-Boot when
+		 * a SFP module is present. Read more in the comment in the
+		 * eth2 node below.
+		 */
+		status = "disabled";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		front-button {
+			label = "Front Button";
+			linux,code = <KEY_VENDOR>;
+			linux,can-disable;
+			gpios = <&mcu 0 12 GPIO_ACTIVE_HIGH>;
+			/* debouncing is done by the microcontroller */
+			debounce-interval = <0>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&audio_controller 1>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&audio_controller {
+	/* Pin header U16, GPIO51 in SPDIFO mode */
+	pinctrl-0 = <&spdif_pins>;
+	pinctrl-names = "default";
+	spdif-mode;
+	status = "okay";
+};
+
+&bm {
+	status = "okay";
+};
+
+&bm_bppi {
+	status = "okay";
+};
+
+/* Connected to 88E6176 switch, port 6 */
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	status = "okay";
+	phy-mode = "rgmii";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <3>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+/* Connected to 88E6176 switch, port 5 */
+&eth1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ge1_rgmii_pins>;
+	status = "okay";
+	phy-mode = "rgmii";
+	buffer-manager = <&bm>;
+	bm,pool-long = <1>;
+	bm,pool-short = <3>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+/* WAN port */
+&eth2 {
+	/*
+	 * eth2 is connected via a multiplexor to both the SFP cage and to
+	 * ethernet-phy@1. The multiplexor switches the signal to SFP cage when
+	 * a SFP module is present, as determined by the mode-def0 GPIO.
+	 *
+	 * Until kernel supports this configuration properly, in case SFP module
+	 * is present, U-Boot has to enable the sfp node above, remove phy
+	 * handle and add managed = "in-band-status" property.
+	 */
+	status = "okay";
+	phy-mode = "sgmii";
+	phy-handle = <&phy1>;
+	phys = <&comphy5 2>;
+	sfp = <&sfp>;
+	buffer-manager = <&bm>;
+	bm,pool-long = <2>;
+	bm,pool-short = <3>;
+	label = "wan";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	i2cmux@70 {
+		compatible = "nxp,pca9547";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			mcu: system-controller@2a {
+				compatible = "cznic,turris-omnia-mcu";
+				reg = <0x2a>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&mcu_pins>;
+
+				interrupt-parent = <&gpio1>;
+				interrupts = <11 IRQ_TYPE_NONE>;
+
+				gpio-controller;
+				#gpio-cells = <3>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			led-controller@2b {
+				compatible = "cznic,turris-omnia-leds";
+				reg = <0x2b>;
+				interrupts-extended = <&mcu 11 IRQ_TYPE_NONE>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				/*
+				 * LEDs are controlled by MCU (STM32F0) at
+				 * address 0x2b.
+				 *
+				 * LED functions are not stable yet:
+				 * - there are 3 LEDs connected via MCU to PCIe
+				 *   ports. One of these ports supports mSATA.
+				 *   There is no mSATA nor PCIe function.
+				 *   For now we use LED_FUNCTION_WLAN, since
+				 *   in most cases users have wifi cards in
+				 *   these slots
+				 * - there are 2 LEDs dedicated for user: A and
+				 *   B. Again there is no such function defined.
+				 *   For now we use LED_FUNCTION_INDICATOR
+				 */
+
+				multi-led@0 {
+					reg = <0x0>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_INDICATOR;
+					function-enumerator = <2>;
+				};
+
+				multi-led@1 {
+					reg = <0x1>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_INDICATOR;
+					function-enumerator = <1>;
+				};
+
+				multi-led@2 {
+					reg = <0x2>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_WLAN;
+					function-enumerator = <3>;
+				};
+
+				multi-led@3 {
+					reg = <0x3>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_WLAN;
+					function-enumerator = <2>;
+				};
+
+				multi-led@4 {
+					reg = <0x4>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_WLAN;
+					function-enumerator = <1>;
+				};
+
+				multi-led@5 {
+					reg = <0x5>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_WAN;
+				};
+
+				multi-led@6 {
+					reg = <0x6>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_LAN;
+					function-enumerator = <4>;
+				};
+
+				multi-led@7 {
+					reg = <0x7>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_LAN;
+					function-enumerator = <3>;
+				};
+
+				multi-led@8 {
+					reg = <0x8>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_LAN;
+					function-enumerator = <2>;
+				};
+
+				multi-led@9 {
+					reg = <0x9>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_LAN;
+					function-enumerator = <1>;
+				};
+
+				multi-led@a {
+					reg = <0xa>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_LAN;
+					function-enumerator = <0>;
+				};
+
+				multi-led@b {
+					reg = <0xb>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_POWER;
+				};
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+
+				/* The EEPROM contains data for bootloader.
+				 * Contents:
+				 * 	struct omnia_eeprom {
+				 * 		u32 magic; (=0x0341a034 in LE)
+				 *		u32 ramsize; (in GiB)
+				 * 		char regdomain[4];
+				 * 		u32 crc32;
+				 * 	};
+				 */
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			/* routed to PCIe0/mSATA connector (CN7A) */
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			/* routed to PCIe1/USB2 connector (CN61A) */
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			/* routed to PCIe2 connector (CN62A) */
+		};
+
+		sfp_i2c: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			/* routed to SFP+ */
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			/* ATSHA204A-MAHDA-T crypto module */
+			crypto@64 {
+				compatible = "atmel,atsha204a";
+				reg = <0x64>;
+			};
+		};
+
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			/* exposed on pin header */
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			pcawan: gpio@71 {
+				/*
+				 * GPIO expander for SFP+ signals and
+				 * and phy irq
+				 */
+				compatible = "nxp,pca9538";
+				reg = <0x71>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&pcawan_pins>;
+
+				interrupt-parent = <&gpio1>;
+				interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		marvell,reg-init = <3 18 0 0x4985>,
+				   <3 16 0xfff0 0x0001>;
+
+		/* irq is connected to &pcawan pin 7 */
+	};
+
+	/* Switch MV88E6176 at address 0x10 */
+	ethernet-switch@10 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&swint_pins>;
+		compatible = "marvell,mv88e6085";
+
+		dsa,member = <0 0>;
+		reg = <0x10>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet-port@0 {
+				reg = <0>;
+				label = "lan0";
+			};
+
+			ethernet-port@1 {
+				reg = <1>;
+				label = "lan1";
+			};
+
+			ethernet-port@2 {
+				reg = <2>;
+				label = "lan2";
+			};
+
+			ethernet-port@3 {
+				reg = <3>;
+				label = "lan3";
+			};
+
+			ethernet-port@4 {
+				reg = <4>;
+				label = "lan4";
+			};
+
+			ethernet-port@5 {
+				reg = <5>;
+				ethernet = <&eth1>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			ethernet-port@6 {
+				reg = <6>;
+				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	mcu_pins: mcu-pins {
+		marvell,pins = "mpp43";
+		marvell,function = "gpio";
+	};
+
+	pcawan_pins: pcawan-pins {
+		marvell,pins = "mpp46";
+		marvell,function = "gpio";
+	};
+
+	swint_pins: swint-pins {
+		marvell,pins = "mpp45";
+		marvell,function = "gpio";
+	};
+
+	spi0cs0_pins: spi0cs0-pins {
+		marvell,pins = "mpp25";
+		marvell,function = "spi0";
+	};
+
+	spi0cs2_pins: spi0cs2-pins {
+		marvell,pins = "mpp26";
+		marvell,function = "spi0";
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins &spi0cs0_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fl164k", "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x00100000>;
+				label = "U-Boot";
+			};
+
+			partition@100000 {
+				reg = <0x00100000 0x00700000>;
+				label = "Rescue system";
+			};
+		};
+	};
+
+	/* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */
+};
+
+&uart0 {
+	/* Pin header CN10 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	/* Pin header CN11 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385.dtsi b/arch/arm/boot/dts/marvell/armada-385.dtsi
new file mode 100644
index 000000000000..be8d607c59b2
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385.dtsi
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 385 SoC.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include "armada-38x.dtsi"
+
+/ {
+	model = "Marvell Armada 385 family SoC";
+	compatible = "marvell,armada385", "marvell,armada380";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-380-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	soc {
+		pciec: pcie {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO  */>;
+
+			/*
+			 * This port can be either x4 or x1. When
+			 * configured in x4 by the bootloader, then
+			 * pcie@4,0 is not available.
+			 */
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			/* x1 port */
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			/* x1 port */
+			pcie3: pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			/*
+			 * x1 port only available when pcie@1,0 is
+			 * configured as a x1 port
+			 */
+			pcie4: pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv88f6820-pinctrl";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts
new file mode 100644
index 000000000000..cf32ba9b4e8e
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for SolidRun Clearfog Base revision A1 rev 2.0 (88F6828)
+ *
+ *  Copyright (C) 2015 Russell King
+ */
+
+/dts-v1/;
+#include "armada-388-clearfog.dtsi"
+
+/ {
+	model = "SolidRun Clearfog Base A1";
+	compatible = "solidrun,clearfog-base-a1",
+		"solidrun,clearfog-a1", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&rear_button_pins>;
+		pinctrl-names = "default";
+
+		button-0 {
+			/* The rear SW3 button */
+			label = "Rear Button";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+	};
+};
+
+&eth1 {
+	phy = <&phy1>;
+};
+
+&gpio0 {
+	phy1-reset-hog {
+		gpio-hog;
+		gpios = <19 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "phy1-reset";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins &clearfog_phy_pins>;
+	phy1: ethernet-phy@1 {
+		/*
+		 * Annoyingly, the marvell phy driver configures the LED
+		 * register, rather than preserving reset-loaded setting.
+		 * We undo that rubbish here.
+		 */
+		marvell,reg-init = <3 16 0 0x101e>;
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	/* phy1 reset */
+	clearfog_phy_pins: clearfog-phy-pins {
+		marvell,pins = "mpp19";
+		marvell,function = "gpio";
+	};
+	rear_button_pins: rear-button-pins {
+		marvell,pins = "mpp44";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-388-clearfog-pro.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog-pro.dts
new file mode 100644
index 000000000000..ff890c09c3ed
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog-pro.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828)
+ *
+ *  Copyright (C) 2015 Russell King
+ */
+#include "armada-388-clearfog.dts"
+
+/ {
+	model = "SolidRun Clearfog Pro A1";
+	compatible = "solidrun,clearfog-pro-a1",
+		"solidrun,clearfog-a1", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-388-clearfog.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
new file mode 100644
index 000000000000..09bf2e6d4ed0
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828)
+ *
+ *  Copyright (C) 2015 Russell King
+ */
+
+/dts-v1/;
+#include "armada-388-clearfog.dtsi"
+
+/ {
+	model = "SolidRun Clearfog A1";
+	compatible = "solidrun,clearfog-pro-a1", "solidrun,clearfog-a1",
+		     "marvell,armada388", "marvell,armada385",
+		     "marvell,armada380";
+
+	soc {
+		internal-regs {
+			usb3@f0000 {
+				/* CON2, nearest CPU, USB2 only. */
+				status = "okay";
+			};
+		};
+
+		pcie {
+			pcie@3,0 {
+				/* Port 2, Lane 0. CON2, nearest CPU. */
+				reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&rear_button_pins>;
+		pinctrl-names = "default";
+
+		button-0 {
+			/* The rear SW3 button */
+			label = "Rear Button";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+	};
+};
+
+&eth1 {
+	/* ethernet@30000 */
+	phy-mode = "1000base-x";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&expander0 {
+	/*
+	 * PCA9655 GPIO expander:
+	 *  0-CON3 CLKREQ#
+	 *  1-CON3 PERST#
+	 *  2-CON2 PERST#
+	 *  3-CON3 W_DISABLE
+	 *  4-CON2 CLKREQ#
+	 *  5-USB3 overcurrent
+	 *  6-USB3 power
+	 *  7-CON2 W_DISABLE
+	 *  8-JP4 P1
+	 *  9-JP4 P4
+	 * 10-JP4 P5
+	 * 11-m.2 DEVSLP
+	 * 12-SFP_LOS
+	 * 13-SFP_TX_FAULT
+	 * 14-SFP_TX_DISABLE
+	 * 15-SFP_MOD_DEF0
+	 */
+	pcie2-0-clkreq-hog {
+		gpio-hog;
+		gpios = <4 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "pcie2.0-clkreq";
+	};
+	pcie2-0-w-disable-hog {
+		gpio-hog;
+		gpios = <7 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "pcie2.0-w-disable";
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethernet-switch@4 {
+		compatible = "marvell,mv88e6085";
+		reg = <4>;
+		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
+		pinctrl-names = "default";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet-port@0 {
+				reg = <0>;
+				label = "lan5";
+			};
+
+			ethernet-port@1 {
+				reg = <1>;
+				label = "lan4";
+			};
+
+			ethernet-port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			ethernet-port@3 {
+				reg = <3>;
+				label = "lan2";
+			};
+
+			ethernet-port@4 {
+				reg = <4>;
+				label = "lan1";
+			};
+
+			ethernet-port@5 {
+				reg = <5>;
+				ethernet = <&eth1>;
+				phy-mode = "1000base-x";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			ethernet-port@6 {
+				/* 88E1512 external phy */
+				reg = <6>;
+				label = "lan6";
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
+		marvell,pins = "mpp46";
+		marvell,function = "ref";
+	};
+	clearfog_dsa0_pins: clearfog-dsa0-pins {
+		marvell,pins = "mpp23", "mpp41";
+		marvell,function = "gpio";
+	};
+	clearfog_spi1_cs_pins: spi1-cs-pins {
+		marvell,pins = "mpp55";
+		marvell,function = "spi1";
+	};
+	rear_button_pins: rear-button-pins {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+};
+
+&spi1 {
+	/*
+	 * Add SPI CS pins for clearfog:
+	 * CS0: W25Q32
+	 * CS1:
+	 * CS2: mikrobus
+	 */
+	pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>;
+};
diff --git a/arch/arm/boot/dts/marvell/armada-388-clearfog.dtsi b/arch/arm/boot/dts/marvell/armada-388-clearfog.dtsi
new file mode 100644
index 000000000000..f8a06ae4a3c9
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog.dtsi
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree include file for SolidRun Clearfog 88F6828 based boards
+ *
+ *  Copyright (C) 2015 Russell King
+ */
+
+#include "armada-388.dtsi"
+#include "armada-38x-solidrun-microsom.dtsi"
+
+/ {
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet1 = &eth0;
+		ethernet2 = &eth1;
+		ethernet3 = &eth2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	soc {
+		internal-regs {
+			sata@a8000 {
+				/* pinctrl? */
+				status = "okay";
+			};
+
+			sata@e0000 {
+				/* pinctrl? */
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				bus-width = <4>;
+				cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+				no-1-8-v;
+				pinctrl-0 = <&microsom_sdhci_pins
+					     &clearfog_sdhci_cd_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				vmmc-supply = <&reg_3p3v>;
+				wp-inverted;
+			};
+
+			usb@58000 {
+				/* CON3, nearest  power. */
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				/* CON7 */
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * the mini-PCIe connectors on the board.
+			 */
+			pcie@2,0 {
+				/* Port 1, Lane 0. CON3, nearest power. */
+				reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+		};
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <2000>;
+	};
+};
+
+&eth1 {
+	/* ethernet@30000 */
+	bm,pool-long = <2>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	phys = <&comphy1 1>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&eth2 {
+	/* ethernet@34000 */
+	bm,pool-long = <3>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	managed = "in-band-status";
+	phys = <&comphy5 2>;
+	phy-mode = "sgmii";
+	sfp = <&sfp>;
+	status = "okay";
+};
+
+&i2c0 {
+	/*
+	 * PCA9655 GPIO expander, up to 1MHz clock.
+	 *  0-CON3 CLKREQ#
+	 *  1-CON3 PERST#
+	 *  2-
+	 *  3-CON3 W_DISABLE
+	 *  4-
+	 *  5-USB3 overcurrent
+	 *  6-USB3 power
+	 *  7-
+	 *  8-JP4 P1
+	 *  9-JP4 P4
+	 * 10-JP4 P5
+	 * 11-m.2 DEVSLP
+	 * 12-SFP_LOS
+	 * 13-SFP_TX_FAULT
+	 * 14-SFP_TX_DISABLE
+	 * 15-SFP_MOD_DEF0
+	 */
+	expander0: gpio-expander@20 {
+		/*
+		 * This is how it should be:
+		 * compatible = "onnn,pca9655", "nxp,pca9555";
+		 * but you can't do this because of the way I2C works.
+		 */
+		compatible = "nxp,pca9555";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x20>;
+
+		pcie1-0-clkreq-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "pcie1.0-clkreq";
+		};
+		pcie1-0-w-disable-hog {
+			gpio-hog;
+			gpios = <3 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "pcie1.0-w-disable";
+		};
+		usb3-ilimit-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "usb3-current-limit";
+		};
+		usb3-power-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "usb3-power";
+		};
+		m2-devslp-hog {
+			gpio-hog;
+			gpios = <11 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "m.2 devslp";
+		};
+	};
+
+	/* The MCP3021 supports standard and fast modes */
+	mikrobus_adc: mcp3021@4c {
+		compatible = "microchip,mcp3021";
+		reg = <0x4c>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+};
+
+&i2c1 {
+	/*
+	 * Routed to SFP, mikrobus, and PCIe.
+	 * SFP limits this to 100kHz, and requires an AT24C01A/02/04 with
+	 *  address pins tied low, which takes addresses 0x50 and 0x51.
+	 * Mikrobus doesn't specify beyond an I2C bus being present.
+	 * PCIe uses ARP to assign addresses, or 0x63-0x64.
+	 */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&clearfog_i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pinctrl {
+	clearfog_i2c1_pins: i2c1-pins {
+		/* SFP, PCIe, mSATA, mikrobus */
+		marvell,pins = "mpp26", "mpp27";
+		marvell,function = "i2c1";
+	};
+	clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins {
+		marvell,pins = "mpp20";
+		marvell,function = "gpio";
+	};
+	mikro_pins: mikro-pins {
+		/* int: mpp22 rst: mpp29 */
+		marvell,pins = "mpp22", "mpp29";
+		marvell,function = "gpio";
+	};
+	mikro_spi_pins: mikro-spi-pins {
+		marvell,pins = "mpp43";
+		marvell,function = "spi1";
+	};
+	mikro_uart_pins: mikro-uart-pins {
+		marvell,pins = "mpp24", "mpp25";
+		marvell,function = "ua1";
+	};
+};
+
+&spi1 {
+	/*
+	 * Add SPI CS pins for clearfog:
+	 * CS0: W25Q32
+	 * CS1: PIC microcontroller (Pro models)
+	 * CS2: mikrobus
+	 */
+	pinctrl-0 = <&spi1_pins &mikro_spi_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	/* mikrobus uart */
+	pinctrl-0 = <&mikro_uart_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-388-db.dts b/arch/arm/boot/dts/marvell/armada-388-db.dts
new file mode 100644
index 000000000000..45cc784659fd
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-388-db.dts
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 388 evaluation board
+ * (DB-88F6820)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+
+/ {
+	model = "Marvell Armada 385 Development Board";
+	compatible = "marvell,a385-db", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+				audio_codec: audio-codec@4a {
+					#sound-dai-cells = <0>;
+					compatible = "cirrus,cs42l51";
+					reg = <0x4a>;
+				};
+			};
+
+			i2c@11100 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
+			};
+
+			usb@58000 {
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
+			};
+
+			mdio@72004 {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			sata@a8000 {
+				status = "okay";
+			};
+
+			sata@e0000 {
+				status = "okay";
+			};
+
+			bm@c8000 {
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				broken-cd;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+				no-1-8-v;
+			};
+
+			audio-controller@e8000 {
+				pinctrl-0 = <&i2s_pins>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+
+		pcie {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * standard PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Armada 385 DB Audio";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Headphone", "Out Jack",
+			"Line", "In Jack";
+		simple-audio-card,routing =
+			"Out Jack", "HPL",
+			"Out Jack", "HPR",
+			"AIN1L", "In Jack",
+			"AIN1R", "In Jack";
+		status = "disabled";
+
+		simple-audio-card,dai-link@0 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 0>;
+			};
+
+			codec {
+				sound-dai = <&audio_codec>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 1>;
+			};
+
+			codec {
+				sound-dai = <&spdif_out>;
+			};
+		};
+
+		simple-audio-card,dai-link@2 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 1>;
+			};
+
+			codec {
+				sound-dai = <&spdif_in>;
+			};
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
+	spdif_in: spdif-in {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/marvell/armada-388-gp.dts
index 895fa6cfa15a..1de0a172aa5f 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-gp.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 /*
  * Device Tree file for Marvell Armada 385 development board
  * (RD-88F6820-GP)
@@ -5,38 +6,6 @@
  * Copyright (C) 2014 Marvell
  *
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -75,7 +44,7 @@
 					pinctrl-names = "default";
 					pinctrl-0 = <&pca0_pins>;
 					interrupt-parent = <&gpio0>;
-					interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+					interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
 					gpio-controller;
 					#gpio-cells = <2>;
 					interrupt-controller;
@@ -87,7 +56,7 @@
 					compatible = "nxp,pca9555";
 					pinctrl-names = "default";
 					interrupt-parent = <&gpio0>;
-					interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+					interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
 					gpio-controller;
 					#gpio-cells = <2>;
 					interrupt-controller;
@@ -240,7 +209,7 @@
 			status = "okay";
 		};
 
-		pcie-controller {
+		pcie {
 			status = "okay";
 			/*
 			 * One PCIe units is accessible through
@@ -268,19 +237,21 @@
 		gpio-fan {
 			compatible = "gpio-fan";
 			gpios = <&expander1 3 GPIO_ACTIVE_HIGH>;
-			gpio-fan,speed-map = <	 0 0
-					      3000 1>;
+			gpio-fan,speed-map = <	 0 0>,
+					     <3000 1>;
 		};
 	};
 
 	usb2_1_phy: usb2_1_phy {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&reg_usb2_1_vbus>;
+		#phy-cells = <0>;
 	};
 
 	usb3_phy: usb3_phy {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&reg_usb3_vbus>;
+		#phy-cells = <0>;
 	};
 
 	reg_usb3_vbus: usb3-vbus {
@@ -424,7 +395,7 @@
 	pinctrl-0 = <&spi0_pins>;
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p128", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/marvell/armada-388-helios4.dts b/arch/arm/boot/dts/marvell/armada-388-helios4.dts
new file mode 100644
index 000000000000..ec134e22bae3
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-388-helios4.dts
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Helios4
+ * based on SolidRun Clearfog revision A1 rev 2.0 (88F6828)
+ *
+ *  Copyright (C) 2017 Aditya Prayoga <aditya@kobol.io>
+ *
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+#include "armada-38x-solidrun-microsom.dtsi"
+
+/ {
+	model = "Helios4";
+	compatible = "kobol,helios4", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2 GB */
+	};
+
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet1 = &eth0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_12v: regulator-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "power_brick_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_12v>;
+	};
+
+	reg_5p0v_hdd: regulator-5v-hdd {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_HDD";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_12v>;
+	};
+
+	reg_5p0v_usb: regulator-5v-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "USB-PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&expander0 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_12v>;
+	};
+
+	system-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_system_led_pins>;
+
+		status-led {
+			label = "helios4:green:status";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+
+		fault-led {
+			label = "helios4:red:fault";
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+	};
+
+	io-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_io_led_pins>;
+
+		sata1-led {
+			label = "helios4:green:ata1";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata1";
+			default-state = "off";
+		};
+		sata2-led {
+			label = "helios4:green:ata2";
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata2";
+			default-state = "off";
+		};
+		sata3-led {
+			label = "helios4:green:ata3";
+			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata3";
+			default-state = "off";
+		};
+		sata4-led {
+			label = "helios4:green:ata4";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata4";
+			default-state = "off";
+		};
+		usb-led {
+			label = "helios4:green:usb";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usb-host";
+			default-state = "off";
+		};
+	};
+
+	fan1: j10-pwm {
+		compatible = "pwm-fan";
+		pwms = <&gpio1 9 40000>;	/* Target freq:25 kHz */
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_fan1_pins>;
+	};
+
+	fan2: j17-pwm {
+		compatible = "pwm-fan";
+		pwms = <&gpio1 23 40000>;	/* Target freq:25 kHz */
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_fan2_pins>;
+	};
+
+	usb2_phy: usb2-phy {
+		compatible = "usb-nop-xceiv";
+		vbus-regulator = <&reg_5p0v_usb>;
+	};
+
+	usb3_phy: usb3-phy {
+		compatible = "usb-nop-xceiv";
+	};
+
+	soc {
+		internal-regs {
+			i2c@11000 {
+				/*
+				 * PCA9655 GPIO expander, up to 1MHz clock.
+				 *  0-Board Revision bit 0 #
+				 *  1-Board Revision bit 1 #
+				 *  5-USB3 overcurrent
+				 *  6-USB3 power
+				 */
+				expander0: gpio-expander@20 {
+					/*
+					 * This is how it should be:
+					 * compatible = "onnn,pca9655",
+					 *	 "nxp,pca9555";
+					 * but you can't do this because of
+					 * the way I2C works.
+					 */
+					compatible = "nxp,pca9555";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0x20>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pca0_pins>;
+					interrupt-parent = <&gpio0>;
+					interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+
+					board-rev-bit-0-hog {
+						gpio-hog;
+						gpios = <0 GPIO_ACTIVE_LOW>;
+						input;
+						line-name = "board-rev-0";
+					};
+					board-rev-bit-1-hog {
+						gpio-hog;
+						gpios = <1 GPIO_ACTIVE_LOW>;
+						input;
+						line-name = "board-rev-1";
+					};
+					usb3-ilimit-hog {
+						gpio-hog;
+						gpios = <5 GPIO_ACTIVE_HIGH>;
+						input;
+						line-name = "usb-overcurrent-status";
+					};
+				};
+
+				temp_sensor: temp@4c {
+					compatible = "ti,lm75";
+					reg = <0x4c>;
+					vcc-supply = <&reg_3p3v>;
+				};
+			};
+
+			i2c@11100 {
+				/*
+				 * External I2C Bus for user peripheral
+				 */
+				clock-frequency = <400000>;
+				pinctrl-0 = <&helios_i2c1_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			sata@a8000 {
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata0: sata-port@0 {
+					reg = <0>;
+				};
+
+				sata1: sata-port@1 {
+					reg = <1>;
+				};
+			};
+
+			sata@e0000 {
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata2: sata-port@0 {
+					reg = <0>;
+				};
+
+				sata3: sata-port@1 {
+					reg = <1>;
+				};
+			};
+
+			spi@10680 {
+				pinctrl-0 = <&spi1_pins
+					     &microsom_spi1_cs_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				bus-width = <4>;
+				cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+				no-1-8-v;
+				pinctrl-0 = <&helios_sdhci_pins
+					     &helios_sdhci_cd_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				vmmc = <&reg_3p3v>;
+				wp-inverted;
+			};
+
+			usb@58000 {
+				usb-phy = <&usb2_phy>;
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+
+			pinctrl@18000 {
+				pca0_pins: pca0-pins {
+					marvell,pins = "mpp23";
+					marvell,function = "gpio";
+				};
+				microsom_phy0_int_pins: microsom-phy0-int-pins {
+					marvell,pins = "mpp18";
+					marvell,function = "gpio";
+				};
+				helios_i2c1_pins: i2c1-pins {
+					marvell,pins = "mpp26", "mpp27";
+					marvell,function = "i2c1";
+				};
+				helios_sdhci_cd_pins: helios-sdhci-cd-pins {
+					marvell,pins = "mpp20";
+					marvell,function = "gpio";
+				};
+				helios_sdhci_pins: helios-sdhci-pins {
+					marvell,pins = "mpp21", "mpp28",
+						       "mpp37", "mpp38",
+						       "mpp39", "mpp40";
+					marvell,function = "sd0";
+				};
+				helios_system_led_pins: helios-system-led-pins {
+					marvell,pins = "mpp24", "mpp25";
+					marvell,function = "gpio";
+				};
+				helios_io_led_pins: helios-io-led-pins {
+					marvell,pins = "mpp49", "mpp50",
+						       "mpp52", "mpp53",
+						       "mpp54";
+					marvell,function = "gpio";
+				};
+				helios_fan1_pins: helios_fan1_pins {
+					marvell,pins = "mpp41", "mpp43";
+					marvell,function = "gpio";
+				};
+				helios_fan2_pins: helios_fan2_pins {
+					marvell,pins = "mpp48", "mpp55";
+					marvell,function = "gpio";
+				};
+				microsom_spi1_cs_pins: spi1-cs-pins {
+					marvell,pins = "mpp59";
+					marvell,function = "spi1";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-388-rd.dts b/arch/arm/boot/dts/marvell/armada-388-rd.dts
new file mode 100644
index 000000000000..c0efafd45b33
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-388-rd.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 388 Reference Design board
+ * (RD-88F6820-AP)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+
+/ {
+	model = "Marvell Armada 385 Reference Design";
+	compatible = "marvell,a385-rd", "marvell,armada388",
+		"marvell,armada385","marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+
+		internal-regs {
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			sdhci@d8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sdhci_pins>;
+				broken-cd;
+				no-1-8-v;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+
+			mdio@72004 {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+			/*
+			 * One PCIe units is accessible through
+			 * standard PCIe slot on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/marvell/armada-388.dtsi b/arch/arm/boot/dts/marvell/armada-388.dtsi
new file mode 100644
index 000000000000..f3a020ff577e
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-388.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 388 SoC.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * The main difference with the Armada 385 is that the 388 can handle two more
+ * SATA ports. So we can reuse the dtsi of the Armada 385, override the pinctrl
+ * property and the name of the SoC, and add the second SATA host which control
+ * the 2 other ports.
+ */
+
+#include "armada-385.dtsi"
+
+/ {
+	model = "Marvell Armada 388 family SoC";
+	compatible = "marvell,armada388", "marvell,armada385",
+		"marvell,armada380";
+	soc {
+		internal-regs {
+			sata@e0000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>;
+				status = "disabled";
+			};
+
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv88f6828-pinctrl";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/marvell/armada-38x-solidrun-microsom.dtsi
new file mode 100644
index 000000000000..2c64bc6e5a17
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-38x-solidrun-microsom.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for SolidRun Armada 38x Microsom
+ *
+ *  Copyright (C) 2015 Russell King
+ */
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			rtc@a3800 {
+				/*
+				 * If the rtc doesn't work, run "date reset"
+				 * twice in u-boot.
+				 */
+				status = "okay";
+			};
+		};
+	};
+};
+
+&bm {
+	status = "okay";
+};
+
+&bm_bppi {
+	status = "okay";
+};
+
+&eth0 {
+	/* ethernet@70000 */
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	pinctrl-names = "default";
+	phy = <&phy_dedicated>;
+	phy-mode = "rgmii-id";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+	status = "okay";
+};
+
+&mdio {
+	/*
+	 * Add the phy clock here, so the phy can be accessed to read its
+	 * IDs prior to binding with the driver.
+	 */
+	pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins>;
+	pinctrl-names = "default";
+
+	phy_dedicated: ethernet-phy@0 {
+		/*
+		 * Annoyingly, the marvell phy driver configures the LED
+		 * register, rather than preserving reset-loaded setting.
+		 * We undo that rubbish here.
+		 */
+		marvell,reg-init = <3 16 0 0x101e>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+};
+
+&pinctrl {
+	microsom_phy_clk_pins: microsom-phy-clk-pins {
+		marvell,pins = "mpp45";
+		marvell,function = "ref";
+	};
+	/* Optional eMMC */
+	microsom_sdhci_pins: microsom-sdhci-pins {
+		marvell,pins = "mpp21", "mpp28", "mpp37",
+			       "mpp38", "mpp39", "mpp40";
+		marvell,function = "sd0";
+	};
+};
+
+&spi1 {
+	/* The microsom has an optional W25Q32 on board, connected to CS0 */
+	pinctrl-0 = <&spi1_pins>;
+
+	w25q32: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <3000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/marvell/armada-38x.dtsi
index af31f5d6c0e5..1d616edda322 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-38x.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada 38x family of SoCs.
  *
@@ -6,53 +7,17 @@
  * Lior Amsalem <alior@marvell.com>
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	model = "Marvell Armada 38x family SoC";
 	compatible = "marvell,armada380";
 
@@ -138,14 +103,19 @@
 			#size-cells = <1>;
 			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
 
+			sdramc: sdramc@1400 {
+				compatible = "marvell,armada-xp-sdram-controller";
+				reg = <0x1400 0x500>;
+			};
+
 			L2: cache-controller@8000 {
 				compatible = "arm,pl310-cache";
 				reg = <0x8000 0x1000>;
 				cache-unified;
 				cache-level = <2>;
-				arm,double-linefill-incr = <1>;
+				arm,double-linefill-incr = <0>;
 				arm,double-linefill-wrap = <0>;
-				arm,double-linefill = <1>;
+				arm,double-linefill = <0>;
 				prefetch-data = <1>;
 			};
 
@@ -154,6 +124,13 @@
 				reg = <0xc000 0x58>;
 			};
 
+			timer@c200 {
+				compatible = "arm,cortex-a9-global-timer";
+				reg = <0xc200 0x20>;
+				interrupts = <GIC_PPI 11 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+				clocks = <&coreclk 2>;
+			};
+
 			timer@c600 {
 				compatible = "arm,cortex-a9-twd-timer";
 				reg = <0xc600 0x20>;
@@ -171,29 +148,27 @@
 			};
 
 			i2c0: i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
+				compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
 
 			i2c1: i2c@11100 {
-				compatible = "marvell,mv64xxx-i2c";
+				compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
 				reg = <0x11100 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
 
 			uart0: serial@12000 {
-				compatible = "snps,dw-apb-uart";
+				compatible = "marvell,armada-38x-uart", "ns16550a";
 				reg = <0x12000 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -203,7 +178,7 @@
 			};
 
 			uart1: serial@12100 {
-				compatible = "snps,dw-apb-uart";
+				compatible = "marvell,armada-38x-uart", "ns16550a";
 				reg = <0x12100 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
@@ -272,6 +247,11 @@
 					marvell,function = "dev";
 				};
 
+				nand_rb: nand-rb-pins {
+					marvell,pins = "mpp41";
+					marvell,function = "nand";
+				};
+
 				uart0_pins: uart-pins-0 {
 					marvell,pins = "mpp0", "mpp1";
 					marvell,function = "ua0";
@@ -309,6 +289,18 @@
 					marvell,pins = "mpp44";
 					marvell,function = "sata3";
 				};
+
+				i2s_pins: i2s-pins {
+					marvell,pins = "mpp48", "mpp49",
+						       "mpp50", "mpp51",
+						       "mpp52", "mpp53";
+					marvell,function = "audio";
+				};
+
+				spdif_pins: spdif-pins {
+					marvell,pins = "mpp51";
+					marvell,function = "audio";
+				};
 			};
 
 			gpio0: gpio@18100 {
@@ -318,6 +310,7 @@
 				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
+				gpio-ranges = <&pinctrl 0 0 32>;
 				#gpio-cells = <2>;
 				#pwm-cells = <2>;
 				interrupt-controller;
@@ -336,6 +329,7 @@
 				reg-names = "gpio", "pwm";
 				ngpios = <28>;
 				gpio-controller;
+				gpio-ranges = <&pinctrl 0 32 28>;
 				#gpio-cells = <2>;
 				#pwm-cells = <2>;
 				interrupt-controller;
@@ -360,6 +354,44 @@
 				#clock-cells = <1>;
 			};
 
+			comphy: phy@18300 {
+				compatible = "marvell,armada-380-comphy";
+				reg-names = "comphy", "conf";
+				reg = <0x18300 0x100>, <0x18460 4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				comphy0: phy@0 {
+					reg = <0>;
+					#phy-cells = <1>;
+				};
+
+				comphy1: phy@1 {
+					reg = <1>;
+					#phy-cells = <1>;
+				};
+
+				comphy2: phy@2 {
+					reg = <2>;
+					#phy-cells = <1>;
+				};
+
+				comphy3: phy@3 {
+					reg = <3>;
+					#phy-cells = <1>;
+				};
+
+				comphy4: phy@4 {
+					reg = <4>;
+					#phy-cells = <1>;
+				};
+
+				comphy5: phy@5 {
+					reg = <5>;
+					#phy-cells = <1>;
+				};
+			};
+
 			coreclk: mvebu-sar@18600 {
 				compatible = "marvell,armada-380-core-clock";
 				reg = <0x18600 0x04>;
@@ -376,7 +408,6 @@
 				compatible = "marvell,mpic";
 				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 				#interrupt-cells = <1>;
-				#size-cells = <1>;
 				interrupt-controller;
 				msi-controller;
 				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -401,6 +432,8 @@
 				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
 				clocks = <&coreclk 2>, <&refclk>;
 				clock-names = "nbclk", "fixed";
+				interrupts-extended = <&gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			cpurst: cpurst@20800 {
@@ -572,15 +605,15 @@
 
 			thermal: thermal@e8078 {
 				compatible = "marvell,armada380-thermal";
-				reg = <0xe4078 0x4>, <0xe4074 0x4>;
+				reg = <0xe4078 0x4>, <0xe4070 0x8>;
 				status = "okay";
 			};
 
-			nand: flash@d0000 {
-				compatible = "marvell,armada370-nand";
+			nand_controller: nand-controller@d0000 {
+				compatible = "marvell,armada370-nand-controller";
 				reg = <0xd0000 0x54>;
 				#address-cells = <1>;
-				#size-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&coredivclk 0>;
 				status = "disabled";
@@ -598,6 +631,18 @@
 				status = "disabled";
 			};
 
+			audio_controller: audio-controller@e8000 {
+				#sound-dai-cells = <1>;
+				compatible = "marvell,armada-380-audio";
+				reg = <0xe8000 0x4000>, <0x18410 0xc>,
+				      <0x18204 0x4>;
+				reg-names = "i2s_regs", "pll_regs", "soc_ctrl";
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 0>;
+				clock-names = "internal";
+				status = "disabled";
+			};
+
 			usb3_0: usb3@f0000 {
 				compatible = "marvell,armada-380-xhci";
 				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
diff --git a/arch/arm/boot/dts/marvell/armada-390-db.dts b/arch/arm/boot/dts/marvell/armada-390-db.dts
new file mode 100644
index 000000000000..20f518dbac97
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-390-db.dts
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 390 Development Board
+ * (DB-88F6920)
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Grzegorz Jaszczyk <jaz@semihalf.com>
+ */
+
+/dts-v1/;
+#include "armada-390.dtsi"
+
+/ {
+	model = "Marvell Armada 390 Development Board";
+	compatible = "marvell,a390-db", "marvell,armada390";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+
+				eeprom@50 {
+					compatible = "atmel,24c64";
+					reg = <0x50>;
+				};
+			};
+
+			/* CON104 */
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* CON97 */
+			usb@58000 {
+				status = "okay";
+			};
+
+			/* CON98 */
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+
+			/* CON30 */
+			pcie@1,0 {
+				status = "okay";
+			};
+
+			/* CON44 */
+			pcie@2,0 {
+				status = "okay";
+			};
+
+			/* CON61 */
+			pcie@3,0 {
+				status = "okay";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13",
+			     "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x400000>;
+			};
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x400000 0xc00000>;
+			};
+		};
+	};
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-390.dtsi b/arch/arm/boot/dts/marvell/armada-390.dtsi
new file mode 100644
index 000000000000..aa2057d4d6f8
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-390.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 390 SoC.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include "armada-39x.dtsi"
+
+/ {
+	compatible = "marvell,armada390";
+
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6920-pinctrl";
+				reg = <0x18000 0x20>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-395-gp.dts b/arch/arm/boot/dts/marvell/armada-395-gp.dts
new file mode 100644
index 000000000000..6dd9e9077f84
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-395-gp.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Marvell Armada 395 GP board
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Grzegorz Jaszczyk <jaz@semihalf.com>
+ */
+
+/dts-v1/;
+#include "armada-395.dtsi"
+
+/ {
+	model = "Marvell Armada 395 GP Board";
+	compatible = "marvell,a395-gp", "marvell,armada395",
+		     "marvell,armada390";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+
+				eeprom@57 {
+					compatible = "atmel,24c64";
+					reg = <0x57>;
+				};
+			};
+
+			serial@12000 {
+				/*
+				 * Exported on the micro USB connector CON17
+				 * through an FTDI
+				 */
+				status = "okay";
+			};
+
+			/* CON1 */
+			usb@58000 {
+				status = "okay";
+			};
+
+			/* CON2 */
+			sata@a8000 {
+				status = "okay";
+			};
+
+			/* CON18 */
+			sdhci@d8000 {
+				clock-frequency = <200000000>;
+				broken-cd;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+				no-1-8-v;
+			};
+
+			/* CON4 */
+			usb3@f0000 {
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+
+			/*
+			 * The two PCIe units are accessible through
+			 * mini PCIe slot on the board.
+			 */
+
+			/* CON7 */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+
+			/* CON8 */
+			pcie@4,0 {
+				/* Port 3, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x00000000 0x00600000>;
+				read-only;
+			};
+
+			partition@800000 {
+				label = "uImage";
+				reg = <0x00600000 0x00400000>;
+				read-only;
+			};
+
+			partition@1000000 {
+				label = "Root";
+				reg = <0x00a00000 0x3f600000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-395.dtsi b/arch/arm/boot/dts/marvell/armada-395.dtsi
new file mode 100644
index 000000000000..e18a7d9cd7d4
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-395.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 395 SoC.
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Grzegorz Jaszczyk <jaz@semihalf.com>
+ */
+
+#include "armada-39x.dtsi"
+
+/ {
+	compatible = "marvell,armada395", "marvell,armada390";
+
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6925-pinctrl";
+				reg = <0x18000 0x20>;
+			};
+
+			sata@a8000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xa8000 0x2000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 15>;
+				status = "disabled";
+			};
+
+			usb3@f0000 {
+				compatible = "marvell,armada-380-xhci";
+				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-398-db.dts b/arch/arm/boot/dts/marvell/armada-398-db.dts
new file mode 100644
index 000000000000..ec6cdbeedde7
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-398-db.dts
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 398 Development Board
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+#include "armada-398.dtsi"
+
+/ {
+	model = "Marvell Armada 398 Development Board";
+	compatible = "marvell,a398-db", "marvell,armada398", "marvell,armada390";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			serial@12000 {
+				pinctrl-0 = <&uart0_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			serial@12100 {
+				pinctrl-0 = <&uart1_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			usb@58000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				status = "okay";
+			};
+
+			pcie@3,0 {
+				status = "okay";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0 0x400000>;
+		};
+
+		partition@400000 {
+			label = "Filesystem";
+			reg = <0x400000 0x1000000>;
+		};
+	};
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-398.dtsi b/arch/arm/boot/dts/marvell/armada-398.dtsi
new file mode 100644
index 000000000000..c5ac89399ce1
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-398.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 398 SoC.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include "armada-395.dtsi"
+
+/ {
+	compatible = "marvell,armada398", "marvell,armada390";
+
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6928-pinctrl";
+				reg = <0x18000 0x20>;
+			};
+
+			sata@e0000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/marvell/armada-39x.dtsi
index 60fbfd5907c7..6d05835efb42 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-39x.dtsi
@@ -1,56 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada 39x family of SoCs.
  *
  * Copyright (C) 2015 Marvell
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Marvell Armada 39x family SoC";
 	compatible = "marvell,armada390";
 
@@ -111,9 +75,9 @@
 				reg = <0x8000 0x1000>;
 				cache-unified;
 				cache-level = <2>;
-				arm,double-linefill-incr = <1>;
+				arm,double-linefill-incr = <0>;
 				arm,double-linefill-wrap = <0>;
-				arm,double-linefill = <1>;
+				arm,double-linefill = <0>;
 				prefetch-data = <1>;
 			};
 
@@ -144,7 +108,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -155,7 +118,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -166,7 +128,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -177,7 +138,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -308,7 +268,6 @@
 				compatible = "marvell,mpic";
 				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 				#interrupt-cells = <1>;
-				#size-cells = <1>;
 				interrupt-controller;
 				msi-controller;
 				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -404,11 +363,11 @@
 				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			flash@d0000 {
-				compatible = "marvell,armada370-nand";
+			nand_controller: nand-controller@d0000 {
+				compatible = "marvell,armada370-nand-controller";
 				reg = <0xd0000 0x54>;
 				#address-cells = <1>;
-				#size-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&coredivclk 0>;
 				status = "disabled";
@@ -442,7 +401,7 @@
 			};
 		};
 
-		pcie-controller {
+		pcie {
 			compatible = "marvell,armada-370-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -478,51 +437,84 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 8>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
 				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/*
@@ -531,19 +523,30 @@
 			 */
 			pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
 				marvell,pcie-port = <3>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 7>;
 				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/marvell/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/marvell/armada-xp-98dx3236.dtsi
new file mode 100644
index 000000000000..a9a71326aafc
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-98dx3236.dtsi
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell 98dx3236 family SoC
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Contains definitions specific to the 98dx3236 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-370-xp.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	model = "Marvell 98DX3236 SoC";
+	compatible = "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,98dx3236-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		compatible = "marvell,armadaxp-mbus", "simple-bus";
+
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+			  MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
+			  MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+		};
+
+		/*
+		 * 98DX3236 has 1 x1 PCIe unit Gen2.0
+		 */
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */>;
+
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
+		internal-regs {
+			sdramc: sdramc@1400 {
+				compatible = "marvell,armada-xp-sdram-controller";
+				reg = <0x1400 0x500>;
+			};
+
+			L2: l2-cache@8000 {
+				compatible = "marvell,aurora-system-cache";
+				reg = <0x08000 0x1000>;
+				cache-id-part = <0x100>;
+				cache-level = <2>;
+				cache-unified;
+				wt-override;
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+			};
+
+			/* does not exist */
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				status = "disabled";
+			};
+
+			gpio2: gpio@18180 { /* rework some properties */
+				compatible = "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <1>; /* only gpio #32 */
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>;
+			};
+
+			systemc: system-controller@18200 {
+				compatible = "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x500>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,mv98dx3236-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			cpuclk: clock-complex@18700 {
+				#clock-cells = <1>;
+				compatible = "marvell,mv98dx3236-cpu-clock";
+				reg = <0x18700 0x24>, <0x1c054 0x10>;
+				clocks = <&coreclk 1>;
+			};
+
+			corediv-clock@18740 {
+				status = "disabled";
+			};
+
+			cpu-config@21000 {
+				compatible = "marvell,armada-xp-cpu-config";
+				reg = <0x21000 0x8>;
+			};
+
+			ethernet@70000 {
+				compatible = "marvell,armada-xp-neta";
+			};
+
+			ethernet@74000 {
+				compatible = "marvell,armada-xp-neta";
+			};
+
+			xor1: xor@f0800 {
+				compatible = "marvell,orion-xor";
+				reg = <0xf0800 0x100
+				       0xf0a00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <51>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <52>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			nand_controller: nand-controller@d0000 {
+				clocks = <&dfx_coredivclk 0>;
+			};
+
+			xor0: xor@f0900 {
+				compatible = "marvell,orion-xor";
+				reg = <0xF0900 0x100
+				       0xF0B00 0x100>;
+				clocks = <&gateclk 28>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <94>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <95>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+		};
+
+		dfx: dfx-server@ac000000 {
+			compatible = "marvell,dfx-server", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
+			reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
+
+			coreclk: mvebu-sar@f8204 {
+				compatible = "marvell,mv98dx3236-core-clock";
+				reg = <0xf8204 0x4>;
+				#clock-cells = <1>;
+			};
+
+			dfx_coredivclk: corediv-clock@f8268 {
+				compatible = "marvell,mv98dx3236-corediv-clock";
+				reg = <0xf8268 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+		};
+
+		switch: switch@a8000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
+
+			pp0: packet-processor@0 {
+				compatible = "marvell,prestera-98dx3236", "marvell,prestera";
+				reg = <0 0x4000000>;
+				interrupts = <33>, <34>, <35>;
+				dfx = <&dfx>;
+			};
+		};
+	};
+
+	clocks {
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+};
+
+&i2c0 {
+	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+	reg = <0x11000 0x100>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+};
+
+&mpic {
+	reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&timer {
+	compatible = "marvell,armada-xp-timer";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+};
+
+&watchdog {
+	compatible = "marvell,armada-xp-wdt";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+	interrupts = <93>, <38>;
+};
+
+&cpurst {
+	reg = <0x20800 0x20>;
+};
+
+&usb0 {
+	clocks = <&gateclk 18>;
+};
+
+&usb1 {
+	clocks = <&gateclk 19>;
+};
+
+&pinctrl {
+	compatible = "marvell,98dx3236-pinctrl";
+
+	nand_pins: nand-pins {
+		marvell,pins = "mpp20", "mpp21", "mpp22",
+			       "mpp23", "mpp24", "mpp25",
+			       "mpp26", "mpp27", "mpp28",
+			       "mpp29", "mpp30";
+		marvell,function = "dev";
+	};
+
+	nand_rb: nand-rb-pins {
+		marvell,pins = "mpp19";
+		marvell,function = "nand";
+	};
+
+	spi0_pins: spi0-pins {
+		marvell,pins = "mpp0", "mpp1",
+			       "mpp2", "mpp3";
+		marvell,function = "spi0";
+	};
+
+	i2c0_pins: i2c-pins-0 {
+		marvell,pins = "mpp14", "mpp15";
+		marvell,function = "i2c0";
+	};
+};
+
+&spi0 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+};
+
+&sdio {
+	status = "disabled";
+};
+
+&uart0 {
+	compatible = "marvell,armada-38x-uart";
+};
+
+&uart1 {
+	compatible = "marvell,armada-38x-uart";
+};
+
diff --git a/arch/arm/boot/dts/marvell/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/marvell/armada-xp-98dx3336.dtsi
new file mode 100644
index 000000000000..1d9d8a8ea60c
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-98dx3336.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell 98dx3336 family SoC
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Contains definitions specific to the 98dx3236 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+	model = "Marvell 98DX3336 SoC";
+	compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
+
+	cpus {
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		internal-regs {
+			resume@20980 {
+				compatible = "marvell,98dx3336-resume-ctrl";
+				reg = <0x20980 0x10>;
+			};
+		};
+	};
+};
+
+&pp0 {
+	compatible = "marvell,prestera-98dx3336", "marvell,prestera";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/marvell/armada-xp-98dx4251.dtsi
new file mode 100644
index 000000000000..48ffdc72bfc7
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-98dx4251.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell 98dx4521 family SoC
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Contains definitions specific to the 98dx4521 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+	model = "Marvell 98DX4251 SoC";
+	compatible = "marvell,armadaxp-98dx4251", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
+
+	cpus {
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		internal-regs {
+			resume@20980 {
+				compatible = "marvell,98dx3336-resume-ctrl";
+				reg = <0x20980 0x10>;
+			};
+		};
+	};
+};
+
+&sdio {
+	status = "okay";
+};
+
+&pinctrl {
+	compatible = "marvell,98dx4251-pinctrl";
+
+	sdio_pins: sdio-pins {
+		marvell,pins = "mpp5", "mpp6", "mpp7",
+			       "mpp8", "mpp9", "mpp10";
+		marvell,function = "sd0";
+	};
+};
+
+&pp0 {
+	compatible = "marvell,prestera-98dx4251", "marvell,prestera";
+	interrupts = <33>, <34>, <35>, <36>;
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/marvell/armada-xp-axpwifiap.dts
new file mode 100644
index 000000000000..5a74197be0ad
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-axpwifiap.dts
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell RD-AXPWiFiAP.
+ *
+ * Note: this board is shipped with a new generation boot loader that
+ * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
+ * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option or the
+ * CONFIG_DEBUG_MVEBU_UART1_ALTERNATE option should be used.
+ *
+ * Copyright (C) 2013 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "Marvell RD-AXPWiFiAP";
+	compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
+
+		internal-regs {
+			/* UART0 */
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* UART1 */
+			serial@12100 {
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <1>;
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&keys_pin>;
+		pinctrl-names = "default";
+
+		button-reset {
+			label = "Factory Reset Button";
+			linux,code = <KEY_SETUP>;
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* First mini-PCIe port */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Second mini-PCIe port */
+	pcie@2,0 {
+		/* Port 0, Lane 1 */
+		status = "okay";
+	};
+
+	/* Renesas uPD720202 USB 3.0 controller */
+	pcie@3,0 {
+		/* Port 0, Lane 3 */
+		status = "okay";
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&phy_int_pin>;
+	pinctrl-names = "default";
+
+	keys_pin: keys-pin {
+		marvell,pins = "mpp33";
+		marvell,function = "gpio";
+	};
+
+	phy_int_pin: phy-int-pin {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s-bit.dts b/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s-bit.dts
new file mode 100644
index 000000000000..c28e140b4afc
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s-bit.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS305-1G-4S+ Bit board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs305-1g-4s.dtsi"
+
+/ {
+	model = "MikroTik CRS305-1G-4S+ Bit";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition@ubi1 {
+			reg = <0x00200000 0x03f00000>;
+			label = "ubi1";
+		};
+		partition@ubi2 {
+			reg = <0x04100000 0x03f00000>;
+			label = "ubi2";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s.dts b/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s.dts
new file mode 100644
index 000000000000..010b83b54212
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS305-1G-4S+ board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs305-1g-4s.dtsi"
+
+/ {
+	model = "MikroTik CRS305-1G-4S+";
+};
+
+&spi0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s.dtsi b/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s.dtsi
new file mode 100644
index 000000000000..47b003a81bd4
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for CRS305-1G-4S board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ * Copyright (C) 2020 Sartura Ltd.
+ *
+ * Based on armada-xp-db.dts
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+	model = "CRS305-1G-4S+";
+	compatible = "mikrotik,crs305-1g-4s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
+	};
+};
+
+&L2 {
+	arm,parity-enable;
+	marvell,ecc-enable;
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Device Bus parameters are required */
+
+	/* Read parameters */
+	devbus,bus-width    = <16>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition@ubi1 {
+			reg = <0x00200000 0x00e00000>;
+			label = "ubi1";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s-bit.dts b/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s-bit.dts
new file mode 100644
index 000000000000..20ba5c823bb2
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s-bit.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS326-24G-2S+ Bit board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs326-24g-2s.dtsi"
+
+/ {
+	model = "MikroTik CRS326-24G-2S+ Bit";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition@ubi1 {
+			reg = <0x00200000 0x03f00000>;
+			label = "ubi1";
+		};
+		partition@ubi2 {
+			reg = <0x04100000 0x03f00000>;
+			label = "ubi2";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s.dts b/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s.dts
new file mode 100644
index 000000000000..83aef43f66d5
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS326-24G-2S+ board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs326-24g-2s.dtsi"
+
+/ {
+	model = "MikroTik CRS326-24G-2S+";
+};
+
+&spi0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s.dtsi b/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s.dtsi
new file mode 100644
index 000000000000..cab99d8e2911
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for CRS326-24G-2S board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ * Copyright (C) 2020 Sartura Ltd.
+ *
+ * Based on armada-xp-db.dts
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+	model = "CRS326-24G-2S+";
+	compatible = "mikrotik,crs326-24g-2s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
+	};
+};
+
+&L2 {
+	arm,parity-enable;
+	marvell,ecc-enable;
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Device Bus parameters are required */
+
+	/* Read parameters */
+	devbus,bus-width    = <16>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition@ubi1 {
+			reg = <0x00200000 0x00e00000>;
+			label = "ubi1";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s-bit.dts b/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s-bit.dts
new file mode 100644
index 000000000000..2caa3980fdf6
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s-bit.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS328-4C-20S-4S+ Bit board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs328-4c-20s-4s.dtsi"
+
+/ {
+	model = "MikroTik CRS328-4C-20S-4S+ Bit";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition@ubi1 {
+			reg = <0x00200000 0x03f00000>;
+			label = "ubi1";
+		};
+		partition@ubi2 {
+			reg = <0x04100000 0x03f00000>;
+			label = "ubi2";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s.dts b/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s.dts
new file mode 100644
index 000000000000..665757f6e18e
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS328-4C-20S-4S+ board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs328-4c-20s-4s.dtsi"
+
+/ {
+	model = "MikroTik CRS328-4C-20S-4S+";
+};
+
+&spi0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s.dtsi b/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s.dtsi
new file mode 100644
index 000000000000..7028482ce4b2
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for CRS328-4C-20S-4S+ board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ * Copyright (C) 2020 Sartura Ltd.
+ *
+ * Based on armada-xp-db.dts
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+	model = "CRS328-4C-20S-4S+";
+	compatible = "mikrotik,crs328-4c-20s-4s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
+	};
+};
+
+&L2 {
+	arm,parity-enable;
+	marvell,ecc-enable;
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Device Bus parameters are required */
+
+	/* Read parameters */
+	devbus,bus-width    = <16>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition@ubi1 {
+			reg = <0x00200000 0x00e00000>;
+			label = "ubi1";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/marvell/armada-xp-db-dxbc2.dts
new file mode 100644
index 000000000000..02bef8dc4270
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-db-dxbc2.dts
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for DB-DXBC2 board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Based on armada-xp-db.dts
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx4251.dtsi"
+
+/ {
+	model = "Marvell Bobcat2 Evaluation Board";
+	compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
+	};
+
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Device Bus parameters are required */
+
+	/* Read parameters */
+	devbus,bus-width    = <16>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+	};
+};
+
+&sdio {
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	/* No CD or WP GPIOs */
+	broken-cd;
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p64";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x00100000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x00100000 0x00040000>;
+			label = "u-boot-env";
+		};
+		partition@unused {
+			reg = <0x00140000 0x00ec0000>;
+			label = "unused";
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/marvell/armada-xp-db-xc3-24g4xg.dts
new file mode 100644
index 000000000000..d1b61dad0c46
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-db-xc3-24g4xg.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for DB-XC3-24G4XG board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Based on armada-xp-db.dts
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx3336.dtsi"
+
+/ {
+	model = "DB-XC3-24G4XG";
+	compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x40000000>; /* 1 GB */
+	};
+};
+
+&L2 {
+	arm,parity-enable;
+	marvell,ecc-enable;
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Device Bus parameters are required */
+
+	/* Read parameters */
+	devbus,bus-width    = <16>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p64";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x00100000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x00100000 0x00040000>;
+			label = "u-boot-env";
+		};
+		partition@unused {
+			reg = <0x00140000 0x00ec0000>;
+			label = "unused";
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-db.dts b/arch/arm/boot/dts/marvell/armada-xp-db.dts
new file mode 100644
index 000000000000..75318fd0fc11
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-db.dts
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada XP evaluation board
+ * (DB-78460-BP)
+ *
+ * Copyright (C) 2012-2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+  *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-mv78460.dtsi"
+
+/ {
+	model = "Marvell Armada XP Evaluation Board";
+	compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <16>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 16 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x1000000>;
+				bank-width = <2>;
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			serial@12100 {
+				status = "okay";
+			};
+			serial@12200 {
+				status = "okay";
+			};
+			serial@12300 {
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
+			};
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+			};
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy3>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
+			};
+
+			bm@c0000 {
+				status = "okay";
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				/* No CD or WP GPIOs */
+				broken-cd;
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+
+			usb@52000 {
+				status = "okay";
+			};
+
+			nand-controller@d0000 {
+				status = "okay";
+
+				nand@0 {
+					reg = <0>;
+					label = "pxa3xx_nand-0";
+					nand-rb = <0>;
+					nand-on-flash-bbt;
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "U-Boot";
+							reg = <0 0x800000>;
+						};
+						partition@800000 {
+							label = "Linux";
+							reg = <0x800000 0x800000>;
+						};
+						partition@1000000 {
+							label = "Filesystem";
+							reg = <0x1000000 0x3f000000>;
+						};
+					};
+				};
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/*
+	 * All 6 slots are physically present as
+	 * standard PCIe slots on the board.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+	pcie@2,0 {
+		/* Port 0, Lane 1 */
+		status = "okay";
+	};
+	pcie@3,0 {
+		/* Port 0, Lane 2 */
+		status = "okay";
+	};
+	pcie@4,0 {
+		/* Port 0, Lane 3 */
+		status = "okay";
+	};
+	pcie@9,0 {
+		/* Port 2, Lane 0 */
+		status = "okay";
+	};
+	pcie@a,0 {
+		/* Port 3, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <25>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <27>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p64", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-gp.dts b/arch/arm/boot/dts/marvell/armada-xp-gp.dts
new file mode 100644
index 000000000000..d1d348b91c0a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-gp.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada XP development board
+ * (DB-MV784MP-GP)
+ *
+ * Copyright (C) 2013-2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78460.dtsi"
+
+/ {
+	model = "Marvell Armada XP Development Board DB-MV784MP-GP";
+	compatible = "marvell,axp-gp", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/*
+                 * 8 GB of plug-in RAM modules by default.The amount
+                 * of memory available can be changed by the
+                 * bootloader according the size of the module
+                 * actually plugged. However, memory between
+                 * 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
+                 * the address range used for I/O (internal registers,
+                 * MBus windows).
+		 */
+		reg = <0x00000000 0x00000000 0x00000000 0xf0000000>,
+		      <0x00000001 0x00000000 0x00000001 0x00000000>;
+	};
+
+	cpus {
+		pm_pic {
+			ctrl-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>,
+				     <&gpio0 17 GPIO_ACTIVE_LOW>,
+				     <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <16>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 16 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x1000000>;
+				bank-width = <2>;
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			serial@12100 {
+				status = "okay";
+			};
+			serial@12200 {
+				status = "okay";
+			};
+			serial@12300 {
+				status = "okay";
+			};
+			pinctrl {
+				pinctrl-0 = <&pic_pins>;
+				pinctrl-names = "default";
+				pic_pins: pic-pins-0 {
+					marvell,pins = "mpp16", "mpp17",
+						       "mpp18";
+					marvell,function = "gpio";
+				};
+			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
+			};
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+			};
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy3>;
+				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
+			};
+
+			/* Front-side USB slot */
+			usb@50000 {
+				status = "okay";
+			};
+
+			/* Back-side USB slot */
+			usb@51000 {
+				status = "okay";
+			};
+
+			bm@c0000 {
+				status = "okay";
+			};
+
+			nand-controller@d0000 {
+				status = "okay";
+
+				nand@0 {
+					reg = <0>;
+					label = "pxa3xx_nand-0";
+					nand-rb = <0>;
+					nand-on-flash-bbt;
+				};
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/*
+	 * The 3 slots are physically present as
+	 * standard PCIe slots on the board.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+	pcie@9,0 {
+		/* Port 2, Lane 0 */
+		status = "okay";
+	};
+	pcie@a,0 {
+		/* Port 3, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <16>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <17>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <18>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <19>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/marvell/armada-xp-lenovo-ix4-300d.dts
new file mode 100644
index 000000000000..21b95578fe95
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-lenovo-ix4-300d.dts
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Lenovo Iomega ix4-300d
+ *
+ * Copyright (C) 2014, Benoit Masson <yahoo@perenite.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "Lenovo Iomega ix4-300d";
+	compatible = "lenovo,ix4-300d", "marvell,armadaxp-mv78230",
+		     "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x20000000>; /* 512MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				clock-frequency = <400000>;
+				status = "okay";
+
+				adt7473@2e {
+					compatible = "adi,adt7473";
+					reg = <0x2e>;
+				};
+
+				eeprom@50 {
+					compatible = "atmel,24c64";
+					reg = <0x50>;
+				};
+
+				pcf8563@51 {
+					compatible = "nxp,pcf8563";
+					reg = <0x51>;
+				};
+
+			};
+
+			nand-controller@d0000 {
+				status = "okay";
+
+				nand@0 {
+					reg = <0>;
+					label = "pxa3xx_nand-0";
+					nand-rb = <0>;
+					nand-on-flash-bbt;
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x000e0000>;
+							read-only;
+						};
+
+						partition@e0000 {
+							label = "u-boot-env";
+							reg = <0x000e0000 0x00020000>;
+							read-only;
+						};
+
+						partition@100000 {
+							label = "u-boot-env2";
+							reg = <0x00100000 0x00020000>;
+							read-only;
+						};
+
+						partition@120000 {
+							label = "zImage";
+							reg = <0x00120000 0x00400000>;
+						};
+
+						partition@520000 {
+							label = "initrd";
+							reg = <0x00520000 0x00400000>;
+						};
+
+						partition@e00000 {
+							label = "boot";
+							reg = <0x00e00000 0x3f200000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&power_button_pin &reset_button_pin
+			&select_button_pin &scroll_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+
+		select-button {
+			label = "Select Button";
+			linux,code = <BTN_SELECT>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		scroll-button {
+			label = "Scroll Button";
+			linux,code = <KEY_SCROLLDOWN>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	spi-3 {
+		compatible = "spi-gpio";
+		status = "okay";
+		sck-gpios  = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		mosi-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; /*gpio 47*/
+		cs-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio_spi: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&hdd_led_pin>;
+		pinctrl-names = "default";
+
+		hdd-led {
+			label = "ix4-300d:hdd:blue";
+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		power-led {
+			label = "ix4-300d:power:white";
+			gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>;
+			/* init blinking while booting */
+			linux,default-trigger = "timer";
+			default-state = "on";
+		};
+
+		sysfail-led {
+			label = "ix4-300d:sysfail:red";
+			gpios = <&gpio_spi 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		sys-led {
+			label = "ix4-300d:sys:blue";
+			gpios = <&gpio_spi 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		hddfail-led {
+			label = "ix4-300d:hddfail:red";
+			gpios = <&gpio_spi 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+	};
+
+	/*
+	 * Warning: you need both eth1 & 0 PHY initialized (i.e having
+	 * them up does the tweak) for poweroff to shutdown otherwise it
+	 * reboots
+	 */
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff_pin>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+	};
+};
+&pciec {
+	status = "okay";
+
+	/* Quad port sata: Marvell 88SX7042 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* USB 3.0 xHCI controller: NEC D720200F1 */
+	pcie@5,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	poweroff_pin: poweroff-pin {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+
+	power_button_pin: power-button-pin {
+		marvell,pins = "mpp44";
+		marvell,function = "gpio";
+	};
+
+	reset_button_pin: reset-button-pin {
+		marvell,pins = "mpp45";
+		marvell,function = "gpio";
+	};
+	select_button_pin: select-button-pin {
+		marvell,pins = "mpp41";
+		marvell,function = "gpio";
+	};
+
+	scroll_button_pin: scroll-button-pin {
+		marvell,pins = "mpp42";
+		marvell,function = "gpio";
+	};
+
+	hdd_led_pin: hdd-led-pin {
+		marvell,pins = "mpp26";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
new file mode 100644
index 000000000000..ea859f7ea042
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
@@ -0,0 +1,395 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for the Linksys WRT1900AC (Mamba).
+ *
+ * Note: this board is shipped with a new generation boot loader that
+ * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
+ * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option should be
+ * used.
+ *
+ * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Based on armada-xp-axpwifiap.dts:
+ *
+ *     Copyright (C) 2013 Marvell
+ *
+ *     Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "Linksys WRT1900AC";
+	compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
+		     "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
+
+		internal-regs {
+
+			rtc@10300 {
+				/* No crystal connected to the internal RTC */
+				status = "disabled";
+			};
+
+			/* J10: VCC, NC, RX, NC, TX, GND  */
+			serial@12000 {
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <1>;
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			/* USB part of the eSATA/USB 2.0 port */
+			usb@50000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+
+				tmp421@4c {
+					compatible = "ti,tmp421";
+					reg = <0x4c>;
+				};
+
+				tlc59116@68 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#gpio-cells = <2>;
+					compatible = "ti,tlc59116";
+					reg = <0x68>;
+
+					wan_amber@0 {
+						label = "mamba:amber:wan";
+						reg = <0x0>;
+					};
+
+					wan_white@1 {
+						label = "mamba:white:wan";
+						reg = <0x1>;
+					};
+
+					wlan_2g@2 {
+						label = "mamba:white:wlan_2g";
+						reg = <0x2>;
+					};
+
+					wlan_5g@3 {
+						label = "mamba:white:wlan_5g";
+						reg = <0x3>;
+					};
+
+					esata@4 {
+						label = "mamba:white:esata";
+						reg = <0x4>;
+						linux,default-trigger = "disk-activity";
+					};
+
+					usb2@5 {
+						label = "mamba:white:usb2";
+						reg = <0x5>;
+					};
+
+					usb3_1@6 {
+						label = "mamba:white:usb3_1";
+						reg = <0x6>;
+					};
+
+					usb3_2@7 {
+						label = "mamba:white:usb3_2";
+						reg = <0x7>;
+					};
+
+					wps_white@8 {
+						label = "mamba:white:wps";
+						reg = <0x8>;
+					};
+
+					wps_amber@9 {
+						label = "mamba:amber:wps";
+						reg = <0x9>;
+					};
+				};
+			};
+
+			bm@c8000 {
+				status = "okay";
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&keys_pin>;
+		pinctrl-names = "default";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button-reset {
+			label = "Factory Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&power_led_pin>;
+		pinctrl-names = "default";
+
+		led-power {
+			label = "mamba:white:power";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	pwm_fan {
+		/* SUNON HA4010V4-0000-C99 */
+
+		compatible = "pwm-fan";
+		pwms = <&gpio0 24 4000>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* Etron EJ168 USB 3.0 controller */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* First mini-PCIe port */
+	pcie@2,0 {
+		/* Port 0, Lane 1 */
+		status = "okay";
+	};
+
+	/* Second mini-PCIe port */
+	pcie@3,0 {
+		/* Port 0, Lane 3 */
+		status = "okay";
+	};
+};
+
+&pinctrl {
+
+	keys_pin: keys-pin {
+		marvell,pins = "mpp32", "mpp33";
+		marvell,function = "gpio";
+	};
+
+	power_led_pin: power-led-pin {
+		marvell,pins = "mpp40";
+		marvell,function = "gpio";
+	};
+
+	gpio_fan_pin: gpio-fan-pin {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "everspin,mr25h256";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethernet-switch@0 {
+		compatible = "marvell,mv88e6085";
+		reg = <0>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet-port@0 {
+				reg = <0>;
+				label = "lan4";
+			};
+
+			ethernet-port@1 {
+				reg = <1>;
+				label = "lan3";
+			};
+
+			ethernet-port@2 {
+				reg = <2>;
+				label = "lan2";
+			};
+
+			ethernet-port@3 {
+				reg = <3>;
+				label = "lan1";
+			};
+
+			ethernet-port@4 {
+				reg = <4>;
+				label = "internet";
+			};
+
+			ethernet-port@5 {
+				reg = <5>;
+				phy-mode = "rgmii-id";
+				ethernet = <&eth0>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;  /* 1MB */
+				read-only;
+			};
+
+			partition@100000 {
+				label = "u_env";
+				reg = <0x100000 0x40000>;    /* 256KB */
+			};
+
+			partition@140000 {
+				label = "s_env";
+				reg = <0x140000 0x40000>;    /* 256KB */
+			};
+
+			partition@900000 {
+				label = "devinfo";
+				reg = <0x900000 0x100000>;   /* 1MB */
+				read-only;
+			};
+
+			/* kernel1 overlaps with rootfs1 by design */
+			partition@a00000 {
+				label = "kernel1";
+				reg = <0xa00000 0x2800000>;  /* 40MB */
+			};
+
+			partition@d00000 {
+				label = "rootfs1";
+				reg = <0xd00000 0x2500000>;  /* 37MB */
+			};
+
+			/* kernel2 overlaps with rootfs2 by design */
+			partition@3200000 {
+				label = "kernel2";
+				reg = <0x3200000 0x2800000>; /* 40MB */
+			};
+
+			partition@3500000 {
+				label = "rootfs2";
+				reg = <0x3500000 0x2500000>; /* 37MB */
+			};
+
+			/*
+			 * 38MB, last MB is for the BBT, not writable
+			 */
+			partition@5a00000 {
+				label = "syscfg";
+				reg = <0x5a00000 0x2600000>;
+			};
+
+			/*
+			 * Unused area between "s_env" and "devinfo".
+			 * Moved here because otherwise the renumbered
+			 * partitions would break the bootloader
+			 * supplied bootargs
+			 */
+			partition@180000 {
+				label = "unused_area";
+				reg = <0x180000 0x780000>;   /* 7.5MB */
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-matrix.dts b/arch/arm/boot/dts/marvell/armada-xp-matrix.dts
new file mode 100644
index 000000000000..1395cea12759
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-matrix.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada XP Matrix board
+ *
+ * Copyright (C) 2013 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ */
+
+/dts-v1/;
+#include "armada-xp-mv78460.dtsi"
+
+/ {
+	model = "Marvell Armada XP Matrix Board";
+	compatible = "marvell,axp-matrix", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/*
+		 * This board has 4 GB of RAM, but the last 256 MB of
+		 * RAM are not usable due to the overlap with the MBus
+		 * Window address range
+		 */
+		reg = <0 0x00000000 0 0xf0000000>;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			serial@12100 {
+				status = "okay";
+			};
+			serial@12200 {
+				status = "okay";
+			};
+			serial@12300 {
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy-mode = "sgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/marvell/armada-xp-mv78230.dtsi
new file mode 100644
index 000000000000..5ea9d509cd30
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-mv78230.dtsi
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Contains definitions specific to the Armada XP MV78230 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78230 SoC";
+	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		/*
+		 * MV78230 has 2 PCIe units Gen2.0: One unit can be
+		 * configured as x4 or quad x1 lanes. One unit is
+		 * x1 only.
+		 */
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0       MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
+
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 59>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie3: pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 60>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie4: pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 61>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie5: pcie@5,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
+						<0 0 0 2 &pcie5_intc 1>,
+						<0 0 0 3 &pcie5_intc 2>,
+						<0 0 0 4 &pcie5_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+
+				pcie5_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
+		internal-regs {
+			gpio0: gpio@18100 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>, <88>, <89>;
+				clocks = <&coreclk 0>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv78230-pinctrl";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/marvell/armada-xp-mv78260.dtsi
new file mode 100644
index 000000000000..6c6fbb9faf5a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-mv78260.dtsi
@@ -0,0 +1,404 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Contains definitions specific to the Armada XP MV78260 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78260 SoC";
+	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		/*
+		 * MV78260 has 3 PCIe units Gen2.0: Two units can be
+		 * configured as x4 or quad x1 lanes. One unit is
+		 * x4 only.
+		 */
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
+				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
+				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+
+				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
+				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
+				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
+
+				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
+
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 59>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie3: pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 60>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie4: pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 61>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie5: pcie@5,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
+						<0 0 0 2 &pcie5_intc 1>,
+						<0 0 0 3 &pcie5_intc 2>,
+						<0 0 0 4 &pcie5_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+
+				pcie5_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie6: pcie@6,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
+				reg = <0x3000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 63>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie6_intc 0>,
+						<0 0 0 2 &pcie6_intc 1>,
+						<0 0 0 3 &pcie6_intc 2>,
+						<0 0 0 4 &pcie6_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+
+				pcie6_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie7: pcie@7,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
+				reg = <0x3800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 64>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie7_intc 0>,
+						<0 0 0 2 &pcie7_intc 1>,
+						<0 0 0 3 &pcie7_intc 2>,
+						<0 0 0 4 &pcie7_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+
+				pcie7_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie8: pcie@8,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
+				reg = <0x4000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 65>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie8_intc 0>,
+						<0 0 0 2 &pcie8_intc 1>,
+						<0 0 0 3 &pcie8_intc 2>,
+						<0 0 0 4 &pcie8_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 12>;
+				status = "disabled";
+
+				pcie8_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie9: pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 99>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie9_intc 0>,
+						<0 0 0 2 &pcie9_intc 1>,
+						<0 0 0 3 &pcie9_intc 2>,
+						<0 0 0 4 &pcie9_intc 3>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+
+				pcie9_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
+		internal-regs {
+			gpio0: gpio@18100 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <91>;
+			};
+
+			eth3: ethernet@34000 {
+				compatible = "marvell,armada-xp-neta";
+				reg = <0x34000 0x4000>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv78260-pinctrl";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/marvell/armada-xp-mv78460.dtsi
new file mode 100644
index 000000000000..16185edf9aa5
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-mv78460.dtsi
@@ -0,0 +1,453 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Contains definitions specific to the Armada XP MV78460 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78460 SoC";
+	compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <2>;
+			clocks = <&cpuclk 2>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <3>;
+			clocks = <&cpuclk 3>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		/*
+		 * MV78460 has 4 PCIe units Gen2.0: Two units can be
+		 * configured as x4 or quad x1 lanes. Two units are
+		 * x4/x1.
+		 */
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
+				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
+				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
+				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+
+				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
+				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
+				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
+
+				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */
+
+				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
+				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
+
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 59>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie3: pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 60>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie4: pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 61>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie5: pcie@5,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
+						<0 0 0 2 &pcie5_intc 1>,
+						<0 0 0 3 &pcie5_intc 2>,
+						<0 0 0 4 &pcie5_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+
+				pcie5_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie6: pcie@6,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
+				reg = <0x3000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 63>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie6_intc 0>,
+						<0 0 0 2 &pcie6_intc 1>,
+						<0 0 0 3 &pcie6_intc 2>,
+						<0 0 0 4 &pcie6_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+
+				pcie6_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie7: pcie@7,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
+				reg = <0x3800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 64>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie7_intc 0>,
+						<0 0 0 2 &pcie7_intc 1>,
+						<0 0 0 3 &pcie7_intc 2>,
+						<0 0 0 4 &pcie7_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+
+				pcie7_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie8: pcie@8,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
+				reg = <0x4000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 65>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie8_intc 0>,
+						<0 0 0 2 &pcie8_intc 1>,
+						<0 0 0 3 &pcie8_intc 2>,
+						<0 0 0 4 &pcie8_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 12>;
+				status = "disabled";
+
+				pcie8_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie9: pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 99>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie9_intc 0>,
+						<0 0 0 2 &pcie9_intc 1>,
+						<0 0 0 3 &pcie9_intc 2>,
+						<0 0 0 4 &pcie9_intc 3>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+
+				pcie9_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie10: pcie@a,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
+				reg = <0x5000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 103>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
+					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie10_intc 0>,
+						<0 0 0 2 &pcie10_intc 1>,
+						<0 0 0 3 &pcie10_intc 2>,
+						<0 0 0 4 &pcie10_intc 3>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 27>;
+				status = "disabled";
+
+				pcie10_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
+		internal-regs {
+			gpio0: gpio@18100 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <91>;
+			};
+
+			eth3: ethernet@34000 {
+				compatible = "marvell,armada-xp-neta";
+				reg = <0x34000 0x4000>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv78460-pinctrl";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/marvell/armada-xp-netgear-rn2120.dts
new file mode 100644
index 000000000000..31933f81144e
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-netgear-rn2120.dts
@@ -0,0 +1,357 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NETGEAR ReadyNAS 2120
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS 2120";
+	compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x80000000>; /* 2GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
+
+		internal-regs {
+
+			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
+			rtc@10300 {
+				status = "disabled";
+			};
+
+			i2c@11000 {
+				clock-frequency = <400000>;
+				status = "okay";
+
+				/* Controller for rear fan #1 of 3 (Protechnic
+				 * MGT4012XB-O20, 8000RPM) near eSATA port */
+				g762_fan1: g762@3e {
+					compatible = "gmt,g762";
+					reg = <0x3e>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				/*  Controller for rear (center) fan #2 of 3 */
+				g762_fan2: g762@48 {
+					compatible = "gmt,g762";
+					reg = <0x48>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				/*  Controller for rear fan #3 of 3 */
+				g762_fan3: g762@49 {
+					compatible = "gmt,g762";
+					reg = <0x49>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				/* Temperature sensor */
+				g751: g751@4c {
+					compatible = "gmt,g751";
+					reg = <0x4c>;
+				};
+
+				isl12057: rtc@68 {
+					compatible = "isil,isl12057";
+					reg = <0x68>;
+					wakeup-source;
+				};
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* Front USB 2.0 port */
+			usb@50000 {
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			/* Two rear eSATA ports */
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+		};
+	};
+
+	clocks {
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&sata1_led_pin &sata2_led_pin &err_led_pin
+			     &sata3_led_pin &sata4_led_pin>;
+		pinctrl-names = "default";
+
+		red-sata1-led {
+			label = "rn2120:red:sata1";
+			gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red-sata2-led {
+			label = "rn2120:red:sata2";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red-sata3-led {
+			label = "rn2120:red:sata3";
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red-sata4-led {
+			label = "rn2120:red:sata4";
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red-err-led {
+			label = "rn2120:red:err";
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&power_button_pin &reset_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* Connected to first Marvell 88SE9170 SATA controller */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Connected to second Marvell 88SE9170 SATA controller */
+	pcie@2,0 {
+		/* Port 0, Lane 1 */
+		status = "okay";
+	};
+
+	/* Connected to Fresco Logic FL1009 USB 3.0 controller */
+	pcie@5,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+		reg = <1>;
+	};
+};
+
+
+&pinctrl {
+	poweroff: poweroff {
+		marvell,pins = "mpp42";
+		marvell,function = "gpio";
+	};
+
+	power_button_pin: power-button-pin {
+		marvell,pins = "mpp27";
+		marvell,function = "gpio";
+	};
+
+	reset_button_pin: reset-button-pin {
+		marvell,pins = "mpp41";
+		marvell,function = "gpio";
+	};
+
+	sata1_led_pin: sata1-led-pin {
+		marvell,pins = "mpp31";
+		marvell,function = "gpio";
+	};
+
+	sata2_led_pin: sata2-led-pin {
+		marvell,pins = "mpp40";
+		marvell,function = "gpio";
+	};
+
+	sata3_led_pin: sata3-led-pin {
+		marvell,pins = "mpp44";
+		marvell,function = "gpio";
+	};
+
+	sata4_led_pin: sata4-led-pin {
+		marvell,pins = "mpp47";
+		marvell,function = "gpio";
+	};
+
+	sata1_power_pin: sata1-power-pin {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+
+	sata2_power_pin: sata2-power-pin {
+		marvell,pins = "mpp25";
+		marvell,function = "gpio";
+	};
+
+	sata3_power_pin: sata3-power-pin {
+		marvell,pins = "mpp26";
+		marvell,function = "gpio";
+	};
+
+	sata4_power_pin: sata4-power-pin {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	sata1_pres_pin: sata1-pres-pin {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+
+	sata2_pres_pin: sata2-pres-pin {
+		marvell,pins = "mpp33";
+		marvell,function = "gpio";
+	};
+
+	sata3_pres_pin: sata3-pres-pin {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+
+	sata4_pres_pin: sata4-pres-pin {
+		marvell,pins = "mpp35";
+		marvell,function = "gpio";
+	};
+
+	err_led_pin: err-led-pin {
+		marvell,pins = "mpp45";
+		marvell,function = "gpio";
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+
+		/* Use Hardware BCH ECC */
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x180000>;  /* 1.5MB */
+				read-only;
+			};
+
+			partition@180000 {
+				label = "u-boot-env";
+				reg = <0x180000 0x20000>;    /* 128KB */
+				read-only;
+			};
+
+			partition@200000 {
+				label = "uImage";
+				reg = <0x0200000 0x600000>;    /* 6MB */
+			};
+
+			partition@800000 {
+				label = "minirootfs";
+				reg = <0x0800000 0x400000>;    /* 4MB */
+			};
+
+			/* Last MB is for the BBT, i.e. not writable */
+			partition@c00000 {
+				label = "ubifs";
+				reg = <0x0c00000 0x7400000>; /* 116MB */
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/marvell/armada-xp-openblocks-ax3-4.dts
new file mode 100644
index 000000000000..1ecf72a61bca
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-openblocks-ax3-4.dts
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for OpenBlocks AX3-4 board
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-xp-mv78260.dtsi"
+
+/ {
+	model = "PlatHome OpenBlocks AX3-4 board";
+	compatible = "plathome,openblocks-ax3-4", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xe8000000 0x8000000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xd1200000 0x100000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <16>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 128 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x8000000>;
+				bank-width = <2>;
+			};
+		};
+
+		internal-regs {
+			rtc@10300 {
+				/* No crystal connected to the internal RTC */
+				status = "disabled";
+			};
+			serial@12000 {
+				status = "okay";
+			};
+			serial@12100 {
+				status = "okay";
+			};
+
+			leds {
+				compatible = "gpio-leds";
+				pinctrl-names = "default";
+				pinctrl-0 = <&led_pins>;
+
+				red_led {
+					label = "red_led";
+					gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+					default-state = "off";
+				};
+
+				yellow_led {
+					label = "yellow_led";
+					gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+					default-state = "off";
+				};
+
+				green_led {
+					label = "green_led";
+					gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+					default-state = "keep";
+				};
+			};
+
+			gpio-keys {
+				compatible = "gpio-keys";
+
+				button-init {
+					label = "Init Button";
+					linux,code = <KEY_POWER>;
+					gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
+			};
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+			};
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy3>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
+			};
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <400000>;
+			};
+			i2c@11100 {
+				status = "okay";
+				clock-frequency = <400000>;
+
+				s35390a: s35390a@30 {
+					compatible = "s35390a";
+					reg = <0x30>;
+				};
+			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			/* Front side USB 0 */
+			usb@50000 {
+				status = "okay";
+			};
+
+			/* Front side USB 1 */
+			usb@51000 {
+				status = "okay";
+			};
+
+			bm@c0000 {
+				status = "okay";
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+	/* Internal mini-PCIe connector */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <2>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
+&pinctrl {
+	led_pins: led-pins-0 {
+		marvell,pins = "mpp49", "mpp51", "mpp53";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/marvell/armada-xp-synology-ds414.dts
new file mode 100644
index 000000000000..1b65059794bf
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-synology-ds414.dts
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Synology DS414
+ *
+ * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the old 0xd0000000).
+ * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
+ * bootloaders provided by Marvell. It is used in recent versions of
+ * DSM software provided by Synology. Nonetheless, some earlier boards
+ * were delivered with an older version of u-boot that left internal
+ * registers mapped at 0xd0000000. If you have such a device you will
+ * not be able to directly boot a kernel based on this Device Tree. In
+ * that case, the preferred solution is to update your bootloader (e.g.
+ * by upgrading to latest version of DSM, or building a new one and
+ * installing it from u-boot prompt) or adjust the Devive Tree
+ * (s/0xf1000000/0xd0000000/ in 'ranges' below).
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "Synology DS414";
+	compatible = "synology,ds414", "marvell,armadaxp-mv78230",
+		     "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x40000000>; /* 1GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
+
+		internal-regs {
+
+			/* RTC is provided by Seiko S-35390A below */
+			rtc@10300 {
+				status = "disabled";
+			};
+
+			i2c@11000 {
+				clock-frequency = <400000>;
+				status = "okay";
+
+				s35390a: s35390a@30 {
+					 compatible = "sii,s35390a";
+					 reg = <0x30>;
+				};
+			};
+
+			/* Connected to a header on device's PCB. This
+			 * provides the main console for the device.
+			 *
+			 * Warning: the device may not boot with a 3.3V
+			 * USB-serial converter connected when the power
+			 * button is pressed. The converter needs to be
+			 * connected a few seconds after pressing the
+			 * power button. This is possibly due to UART0_TXD
+			 * pin being sampled at reset (bit 0 of SAR).
+			 */
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* Connected to a Microchip PIC16F883 for power control */
+			serial@12100 {
+				status = "okay";
+			};
+
+			poweroff@12100 {
+				compatible = "synology,power-off";
+				reg = <0x12100 0x100>;
+				clocks = <&coreclk 0>;
+			};
+
+			/* Front USB 2.0 port */
+			usb@50000 {
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+		};
+	};
+
+	sata1_regulator: sata1-regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA1 Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <2000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&sata1_pwr_pin>;
+		pinctrl-names = "default";
+	};
+
+	sata2_regulator: sata2-regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA2 Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <4000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&sata2_pwr_pin>;
+		pinctrl-names = "default";
+	};
+
+	sata3_regulator: sata3-regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA3 Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <6000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&sata3_pwr_pin>;
+		pinctrl-names = "default";
+	};
+
+	sata4_regulator: sata4-regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA4 Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <8000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&sata4_pwr_pin>;
+		pinctrl-names = "default";
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/*
+	 * Connected to Marvell 88SX7042 SATA-II controller
+	 * handling the four disks.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/*
+	 * Connected to EtronTech EJ168A XHCI controller
+	 * providing the two rear USB 3.0 ports.
+	 */
+	pcie@5,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+
+&mdio {
+	phy0: ethernet-phy@0 { /* Marvell 88E1512 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	sata1_pwr_pin: sata1-pwr-pin {
+		marvell,pins = "mpp42";
+		marvell,function = "gpio";
+	};
+
+	sata2_pwr_pin: sata2-pwr-pin {
+		marvell,pins = "mpp44";
+		marvell,function = "gpio";
+	};
+
+	sata3_pwr_pin: sata3-pwr-pin {
+		marvell,pins = "mpp45";
+		marvell,function = "gpio";
+	};
+
+	sata4_pwr_pin: sata4-pwr-pin {
+		marvell,pins = "mpp46";
+		marvell,function = "gpio";
+	};
+
+	sata1_pres_pin: sata1-pres-pin {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+
+	sata2_pres_pin: sata2-pres-pin {
+		marvell,pins = "mpp35";
+		marvell,function = "gpio";
+	};
+
+	sata3_pres_pin: sata3-pres-pin {
+		marvell,pins = "mpp40";
+		marvell,function = "gpio";
+	};
+
+	sata4_pres_pin: sata4-pres-pin {
+		marvell,pins = "mpp41";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit0_pin: syno-id-bit0-pin {
+		marvell,pins = "mpp26";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit1_pin: syno-id-bit1-pin {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit2_pin: syno-id-bit2-pin {
+		marvell,pins = "mpp29";
+		marvell,function = "gpio";
+	};
+
+	fan1_alarm_pin: fan1-alarm-pin {
+		marvell,pins = "mpp33";
+		marvell,function = "gpio";
+	};
+
+	fan2_alarm_pin: fan2-alarm-pin {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+
+		/*
+		 * Warning!
+		 *
+		 * Synology u-boot uses its compiled-in environment
+		 * and it seems Synology did not care to change u-boot
+		 * default configuration in order to allow saving a
+		 * modified environment at a sensible location. So,
+		 * if you do a 'saveenv' under u-boot, your modified
+		 * environment will be saved at 1MB after the start
+		 * of the flash, i.e. in the middle of the uImage.
+		 * For that reason, it is strongly advised not to
+		 * change the default environment, unless you know
+		 * what you are doing.
+		 */
+		partition@0 { /* u-boot */
+			label = "RedBoot";
+			reg = <0x00000000 0x000d0000>; /* 832KB */
+		};
+
+		partition@c0000 { /* uImage */
+			label = "zImage";
+			reg = <0x000d0000 0x002d0000>; /* 2880KB */
+		};
+
+		partition@3a0000 { /* uInitramfs */
+			label = "rd.gz";
+			reg = <0x003a0000 0x00430000>; /* 4250KB */
+		};
+
+		partition@7d0000 { /* MAC address and serial number */
+			label = "vendor";
+			reg = <0x007d0000 0x00010000>; /* 64KB */
+		};
+
+		partition@7e0000 {
+			label = "RedBoot config";
+			reg = <0x007e0000 0x00010000>; /* 64KB */
+		};
+
+		partition@7f0000 {
+			label = "FIS directory";
+			reg = <0x007f0000 0x00010000>; /* 64KB */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/marvell/armada-xp.dtsi
index fa1e881266ac..4297482da62f 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-xp.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada XP family SoC
  *
@@ -8,44 +9,6 @@
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  * Ben Dooks <ben.dooks@codethink.co.uk>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
  * Contains definitions specific to the Armada XP SoC that are not
  * common to all Armada SoCs.
  */
@@ -73,7 +36,7 @@
 		};
 
 		internal-regs {
-			sdramc@1400 {
+			sdramc: sdramc@1400 {
 				compatible = "marvell,armada-xp-sdram-controller";
 				reg = <0x1400 0x500>;
 			};
@@ -297,6 +260,7 @@
 	compatible = "marvell,armada-xp-wdt";
 	clocks = <&coreclk 2>, <&refclk>;
 	clock-names = "nbclk", "fixed";
+	interrupts = <93>, <38>;
 };
 
 &cpurst {
diff --git a/arch/arm/boot/dts/dove-cm-a510.dtsi b/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi
index 9b9dfbe07be4..621cb145a8f6 100644
--- a/arch/arm/boot/dts/dove-cm-a510.dtsi
+++ b/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi
@@ -101,32 +101,34 @@
 		pinctrl-0 = <&pmx_nand_gpo>;
 		pinctrl-names = "default";
 
-		system {
+		led-system {
 			label = "cm-a510:system:green";
 			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		wifi_power: regulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "WiFi Power";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
-		};
+	wifi_power: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "WiFi Power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
 	};
 };
 
 /* Optional RTL8211D GbE PHY on SMI address 0x03 */
-&ethphy {
-	reg = <3>;
-	status = "disabled";
+&mdio {
+	ethphy: ethernet-phy@3 {
+		reg = <3>;
+		status = "disabled";
+	};
+};
+
+&eth {
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
 };
 
 &i2c0 {
diff --git a/arch/arm/boot/dts/dove-cubox-es.dts b/arch/arm/boot/dts/marvell/dove-cubox-es.dts
index e28ef056dd17..ad361ec1361d 100644
--- a/arch/arm/boot/dts/dove-cubox-es.dts
+++ b/arch/arm/boot/dts/marvell/dove-cubox-es.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #include "dove-cubox.dts"
 
 / {
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/marvell/dove-cubox.dts
index af3cb633135f..bcaaf8320c45 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/marvell/dove-cubox.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "dove.dtsi"
@@ -20,31 +21,24 @@
 		pinctrl-0 = <&pmx_gpio_18>;
 		pinctrl-names = "default";
 
-		power {
+		led-power {
 			label = "Power";
 			gpios = <&gpio0 18 1>;
 			default-state = "keep";
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 1 0>;
-			pinctrl-0 = <&pmx_gpio_1>;
-			pinctrl-names = "default";
-		};
+	usb_power: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 1 0>;
+		pinctrl-0 = <&pmx_gpio_1>;
+		pinctrl-names = "default";
 	};
 
 	clocks {
@@ -71,11 +65,18 @@
 &uart0 { status = "okay"; };
 &sata0 { status = "okay"; };
 &mdio { status = "okay"; };
-&eth { status = "okay"; };
+&eth {
+	status = "okay";
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
 
-&ethphy {
-	compatible = "marvell,88e1310";
-	reg = <1>;
+&mdio {
+	ethphy: ethernet-phy@1 {
+		compatible = "marvell,88e1310";
+		reg = <1>;
+	};
 };
 
 &gpu {
@@ -86,7 +87,7 @@
 	status = "okay";
 	clock-frequency = <100000>;
 
-	si5351: clock-generator {
+	si5351: clock-generator@60 {
 		compatible = "silabs,si5351a-msop";
 		reg = <0x60>;
 		#address-cells = <1>;
@@ -100,7 +101,7 @@
 		/* connect xtal input as source of pll0 and pll1 */
 		silabs,pll-source = <0 0>, <1 0>;
 
-		clkout0 {
+		clkout@0 {
 			reg = <0>;
 			silabs,drive-strength = <8>;
 			silabs,multisynth-source = <0>;
@@ -108,7 +109,7 @@
 			silabs,pll-master;
 		};
 
-		clkout2 {
+		clkout@2 {
 			reg = <2>;
 			silabs,drive-strength = <8>;
 			silabs,multisynth-source = <1>;
@@ -126,7 +127,7 @@
 	status = "okay";
 
 	/* spi0.0: 4M Flash Winbond W25Q32BV */
-	spi-flash@0 {
+	flash@0 {
 		compatible = "st,w25q32";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/dove-d2plug.dts b/arch/arm/boot/dts/marvell/dove-d2plug.dts
index c11d3636c8e5..79ee2b32409d 100644
--- a/arch/arm/boot/dts/dove-d2plug.dts
+++ b/arch/arm/boot/dts/marvell/dove-d2plug.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "dove.dtsi"
@@ -20,17 +21,17 @@
 		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
 		pinctrl-names = "default";
 
-		wlan-ap {
+		led-wlan-ap {
 			label = "wlan-ap";
 			gpios = <&gpio0 0 1>;
 		};
 
-		wlan-act {
+		led-wlan-act {
 			label = "wlan-act";
 			gpios = <&gpio0 1 1>;
 		};
 
-		bluetooth-act {
+		led-bluetooth-act {
 			label = "bt-act";
 			gpios = <&gpio0 2 1>;
 		};
@@ -61,7 +62,7 @@
 	status = "okay";
 
 	/* spi0.0: 4M Flash Macronix MX25L3205D */
-	spi-flash@0 {
+	flash@0 {
 		compatible = "st,m25l3205d";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/marvell/dove-d3plug.dts b/arch/arm/boot/dts/marvell/dove-d3plug.dts
new file mode 100644
index 000000000000..a451fd576990
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/dove-d3plug.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "dove.dtsi"
+
+/ {
+	model = "Globalscale D3Plug";
+	compatible = "globalscale,d3plug", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
+		pinctrl-names = "default";
+
+		led-wlan-act {
+			label = "wlan-act";
+			gpios = <&gpio0 0 1>;
+		};
+
+		led-wlan-ap {
+			label = "wlan-ap";
+			gpios = <&gpio0 1 1>;
+		};
+
+		led-status {
+			label = "status";
+			gpios = <&gpio0 2 1>;
+		};
+	};
+
+	usb_power: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 8 0>;
+		pinctrl-0 = <&pmx_gpio_8>;
+		pinctrl-names = "default";
+	};
+};
+
+&uart0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+
+/* Samsung M8G2F eMMC */
+&sdio0 {
+	status = "okay";
+	non-removable;
+	bus-width = <4>;
+};
+
+/* Marvell SD8787 WLAN/BT */
+&sdio1 {
+	status = "okay";
+	non-removable;
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 2M Flash Macronix MX25L1605D */
+	flash@0 {
+		compatible = "st,m25l1605d";
+		spi-max-frequency = <86000000>;
+		reg = <0>;
+	};
+};
+
+&pcie {
+	status = "okay";
+	/* Fresco Logic USB3.0 xHCI controller */
+	pcie@1 {
+		status = "okay";
+		reset-gpios = <&gpio0 26 1>;
+		reset-delay-us = <20000>;
+		pinctrl-0 = <&pmx_camera_gpio>;
+		pinctrl-names = "default";
+	};
+	/* Mini-PCIe slot */
+	pcie@2 {
+		status = "okay";
+		reset-gpios = <&gpio0 25 1>;
+	};
+};
diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/marvell/dove-dove-db.dts
index bb725dca3a10..c1912dc6bfc3 100644
--- a/arch/arm/boot/dts/dove-dove-db.dts
+++ b/arch/arm/boot/dts/marvell/dove-dove-db.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "dove.dtsi"
@@ -26,7 +27,7 @@
 	status = "okay";
 
 	/* spi0.0: 4M Flash ST-M25P32-VMF6P */
-	spi-flash@0 {
+	flash@0 {
 		compatible = "st,m25p32";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/dove-sbc-a510.dts b/arch/arm/boot/dts/marvell/dove-sbc-a510.dts
index 2bb85a9b7614..8585ee5533bf 100644
--- a/arch/arm/boot/dts/dove-sbc-a510.dts
+++ b/arch/arm/boot/dts/marvell/dove-sbc-a510.dts
@@ -76,22 +76,20 @@
 		stdout-path = &uart0;
 	};
 
-	regulators {
-		usb0_power: regulator@2 {
-			compatible = "regulator-fixed";
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		mmc_power: regulator@3 {
-			compatible = "regulator-fixed";
-			regulator-name = "MMC Power";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>;
-		};
+	usb0_power: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	mmc_power: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MMC Power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>;
 	};
 };
 
@@ -143,6 +141,7 @@
 	gpio_ext: gpio@20 {
 		compatible = "nxp,pca9555";
 		reg = <0x20>;
+		gpio-controller;
 		#gpio-cells = <2>;
 	};
 };
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/marvell/dove.dtsi
index 698d58cea20d..062c86361640 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/marvell/dove.dtsi
@@ -1,11 +1,12 @@
-/include/ "skeleton.dtsi"
-
+// SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "marvell,dove";
 	model = "Marvell Armada 88AP510 SoC";
 	interrupt-parent = <&intc>;
@@ -89,7 +90,7 @@
 			  MBUS_ID(0x03, 0x01) 0 0xc8000000 0x0100000   /* CESA SRAM  1M */
 			  MBUS_ID(0x0d, 0x00) 0 0xf0000000 0x0100000>; /* PMU  SRAM  1M */
 
-		pcie: pcie-controller {
+		pcie: pcie {
 			compatible = "marvell,dove-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -106,7 +107,7 @@
 				  0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0   /* Port 1.0 Mem */
 				  0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */
 
-			pcie0: pcie-port@0 {
+			pcie0: pcie@1 {
 				device_type = "pci";
 				status = "disabled";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
@@ -118,16 +119,27 @@
 				#size-cells = <2>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 				          0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
 
 				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 16>;
+				interrupt-names = "intx", "error";
+				interrupts = <16>, <15>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie1: pcie-port@1 {
+			pcie1: pcie@2 {
 				device_type = "pci";
 				status = "disabled";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				clocks = <&gate_clk 5>;
 				marvell,pcie-port = <1>;
@@ -136,10 +148,21 @@
 				#size-cells = <2>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 				          0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
 
 				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 18>;
+				interrupt-names = "intx", "error";
+				interrupts = <18>, <17>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
@@ -152,7 +175,7 @@
 				  0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800   /* CESA SRAM  2k */
 				  0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU  SRAM  2k */
 
-			spi0: spi-ctrl@10600 {
+			spi0: spi@10600 {
 				compatible = "marvell,orion-spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -165,14 +188,13 @@
 				status = "disabled";
 			};
 
-			i2c: i2c-ctrl@11000 {
+			i2c: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <11>;
 				clock-frequency = <400000>;
-				timeout-ms = <1000>;
 				clocks = <&core_clk 0>;
 				status = "okay";
 			};
@@ -215,7 +237,7 @@
 				status = "disabled";
 			};
 
-			spi1: spi-ctrl@14600 {
+			spi1: spi@14600 {
 				compatible = "marvell,orion-spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -245,7 +267,7 @@
 				marvell,#interrupts = <5>;
 			};
 
-			intc: main-interrupt-ctrl@20200 {
+			intc: interrupt-controller@20200 {
 				compatible = "marvell,orion-intc";
 				interrupt-controller;
 				#interrupt-cells = <1>;
@@ -360,7 +382,6 @@
 					interrupts = <29>;
 					/* overwrite MAC address in bootloader */
 					local-mac-address = [00 00 00 00 00 00];
-					phy-handle = <&ethphy>;
 				};
 			};
 
@@ -372,10 +393,6 @@
 				interrupts = <30>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
-
-				ethphy: ethernet-phy {
-					/* set phy address in board file */
-				};
 			};
 
 			sdio0: sdio-host@92000 {
@@ -405,7 +422,7 @@
 				clocks = <&gate_clk 3>;
 				clock-names = "sata";
 				#phy-cells = <0>;
-				status = "ok";
+				status = "okay";
 			};
 
 			audio0: audio-controller@b0000 {
@@ -454,25 +471,25 @@
 					};
 				};
 
-				thermal: thermal-diode@001c {
+				thermal: thermal-diode@1c {
 					compatible = "marvell,dove-thermal";
 					reg = <0x001c 0x0c>, <0x005c 0x08>;
 				};
 
-				gate_clk: clock-gating-ctrl@0038 {
+				gate_clk: clock-gating-ctrl@38 {
 					compatible = "marvell,dove-gating-clock";
 					reg = <0x0038 0x4>;
 					clocks = <&core_clk 0>;
 					#clock-cells = <1>;
 				};
 
-				divider_clk: core-clock@0064 {
+				divider_clk: core-clock@64 {
 					compatible = "marvell,dove-divider-clock";
 					reg = <0x0064 0x8>;
 					#clock-cells = <1>;
 				};
 
-				pinctrl: pin-ctrl@0200 {
+				pinctrl: pin-ctrl@200 {
 					compatible = "marvell,dove-pinctrl";
 					reg = <0x0200 0x14>,
 					      <0x0440 0x04>;
@@ -716,13 +733,13 @@
 					};
 				};
 
-				core_clk: core-clocks@0214 {
+				core_clk: core-clocks@214 {
 					compatible = "marvell,dove-core-clock";
 					reg = <0x0214 0x4>;
 					#clock-cells = <1>;
 				};
 
-				gpio0: gpio-ctrl@0400 {
+				gpio0: gpio-ctrl@400 {
 					compatible = "marvell,orion-gpio";
 					#gpio-cells = <2>;
 					gpio-controller;
@@ -734,7 +751,7 @@
 					interrupts = <12>, <13>, <14>, <60>;
 				};
 
-				gpio1: gpio-ctrl@0420 {
+				gpio1: gpio-ctrl@420 {
 					compatible = "marvell,orion-gpio";
 					#gpio-cells = <2>;
 					gpio-controller;
@@ -781,7 +798,7 @@
 				status = "disabled";
 			};
 
-			crypto_sram: sa-sram@ffffe000 {
+			crypto_sram: sram@ffffe000 {
 				compatible = "mmio-sram";
 				reg = <0xffffe000 0x800>;
 				clocks = <&gate_clk 15>;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-4i-edge-200.dts b/arch/arm/boot/dts/marvell/kirkwood-4i-edge-200.dts
new file mode 100644
index 000000000000..b1749d3f60b7
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-4i-edge-200.dts
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Endian 4i Edge 200 Board Description
+ * Note: Endian UTM Mini is hardware clone of Endian Edge 200
+ * Copyright 2021-2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Endian 4i Edge 200";
+	compatible = "endian,4i-edge-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led>;
+		pinctrl-names = "default";
+
+		led-1 {
+			function = LED_FUNCTION_SD;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+};
+
+&eth0port {
+	speed = <1000>;
+	duplex = <1>;
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&eth1port {
+	phy-handle = <&ethphyb>;
+};
+
+&mdio {
+	status = "okay";
+
+	ethphyb: ethernet-phy@b {
+		reg = <0x0b>;
+
+		marvell,reg-init =
+			/* link-activity, bi-color mode 4 */
+			<3 0x10 0xfff0 0xf>; /* Reg 3,16 <- 0xzzzf */
+	};
+
+	switch0: switch@11 {
+		compatible = "marvell,mv88e6085";
+		reg = <0x11>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "port1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "port2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "port3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "port4";
+			};
+
+			port@5 {
+				reg = <5>;
+				phy-mode = "rgmii-id";
+				ethernet = <&eth0port>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x00000000 0x000a0000>;
+		read-only;
+	};
+
+	partition@a0000 {
+		label = "u-boot-env";
+		reg = <0x000a0000 0x00060000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "kernel";
+		reg = <0x00100000 0x00400000>;
+	};
+
+	partition@500000 {
+		label = "ubi";
+		reg = <0x00500000 0x1fb00000>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_sysrst>;
+	pinctrl-names = "default";
+
+	pmx_sysrst: pmx-sysrst {
+		marvell,pins = "mpp6";
+		marvell,function = "sysrst";
+	};
+
+	pmx_sdio_cd: pmx-sdio-cd {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	pmx_led: pmx-led {
+		marvell,pins = "mpp34", "mpp35", "mpp49";
+		marvell,function = "gpio";
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata_phy0 {
+	status = "disabled";
+};
+
+&sata_phy1 {
+	status = "disabled";
+};
+
+&sdio {
+	pinctrl-0 = <&pmx_sdio_cd>;
+	pinctrl-names = "default";
+	status = "okay";
+	cd-gpios = <&gpio0 28 9>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/marvell/kirkwood-6192.dtsi
index d573e03f3134..705c0d7effed 100644
--- a/arch/arm/boot/dts/kirkwood-6192.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-6192.dtsi
@@ -1,6 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
 / {
 	mbus@f1000000 {
-		pciec: pcie-controller@82000000 {
+		pciec: pcie@82000000 {
 			compatible = "marvell,kirkwood-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -24,12 +25,23 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
+				bus-range = <0x00 0xff>;
+				interrupt-names = "intx", "error";
+				interrupts = <9>, <44>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie_intc 0>,
+						<0 0 0 2 &pcie_intc 1>,
+						<0 0 0 3 &pcie_intc 2>,
+						<0 0 0 4 &pcie_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
+
+				pcie_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/marvell/kirkwood-6281.dtsi
index 748d0b62f233..8e311165fd13 100644
--- a/arch/arm/boot/dts/kirkwood-6281.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-6281.dtsi
@@ -1,6 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
 / {
 	mbus@f1000000 {
-		pciec: pcie-controller@82000000 {
+		pciec: pcie@82000000 {
 			compatible = "marvell,kirkwood-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -24,12 +25,23 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
+				bus-range = <0x00 0xff>;
+				interrupt-names = "intx", "error";
+				interrupts = <9>, <44>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie_intc 0>,
+						<0 0 0 2 &pcie_intc 1>,
+						<0 0 0 3 &pcie_intc 2>,
+						<0 0 0 4 &pcie_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
+
+				pcie_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/marvell/kirkwood-6282.dtsi
index bb63d2d50fc5..e33723160ce7 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-6282.dtsi
@@ -1,6 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
 / {
 	mbus@f1000000 {
-		pciec: pcie-controller@82000000 {
+		pciec: pcie@82000000 {
 			compatible = "marvell,kirkwood-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -28,12 +29,23 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
+				bus-range = <0x00 0xff>;
+				interrupt-names = "intx", "error";
+				interrupts = <9>, <44>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie1: pcie@2,0 {
@@ -45,12 +57,23 @@
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 10>;
+				bus-range = <0x00 0xff>;
+				interrupt-names = "intx", "error";
+				interrupts = <10>, <45>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gate_clk 18>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/marvell/kirkwood-98dx4122.dtsi
new file mode 100644
index 000000000000..c3469a2fc58a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-98dx4122.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	mbus@f1000000 {
+		pciec: pcie@82000000 {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
+
+			pcie0: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-names = "intx", "error";
+				interrupts = <9>, <44>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie_intc 0>,
+						<0 0 0 2 &pcie_intc 1>,
+						<0 0 0 3 &pcie_intc 2>,
+						<0 0 0 4 &pcie_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+
+				pcie_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			compatible = "marvell,98dx4122-pinctrl";
+
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "disabled";
+};
+
+&sata_phy1 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/marvell/kirkwood-b3.dts
index d091ecb61cd2..681343c1357a 100644
--- a/arch/arm/boot/dts/kirkwood-b3.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-b3.dts
@@ -1,18 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Device Tree file for Excito Bubba B3
  *
  * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
  *
  * Note: This requires a new'ish version of u-boot, which disables the
  * L2 cache. If your B3 silently fails to boot, u-boot is probably too
  * old. Either upgrade, or consider the following email:
  *
- * http://lists.debian.org/debian-arm/2012/08/msg00128.html
+ * https://lists.debian.org/debian-arm/2012/08/msg00128.html
  */
 
 /dts-v1/;
@@ -190,7 +187,7 @@
 
 /* Wifi model has Atheros chipset on pcie port */
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts b/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts
index f16a73e49a88..36b90c632fd6 100644
--- a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Device Tree file for Seagate Blackarmor NAS220
  *
  * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
- *
- * Licensed under GPLv2 or later.
  */
 
 /dts-v1/;
@@ -36,13 +35,13 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 		};
 
-		button {
+		button-power {
 			label = "Power";
 			linux,code = <KEY_SLEEP>;
 			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
@@ -52,7 +51,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		blue-power {
+		led-blue-power {
 			label = "nas220:blue:power";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts b/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts
new file mode 100644
index 000000000000..7e3ee64d4bdf
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Ctera C200 V1 Board Description
+ * Copyright 2021-2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Ctera C200 V1";
+	compatible = "ctera,c200-v1", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		button-power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+
+		button-usb1 {
+			label = "USB1 Button";
+			linux,code = <BTN_0>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+
+		button-usb2 {
+			label = "USB2 Button";
+			linux,code = <BTN_1>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		led-0 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led-7 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-8 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+
+		led-9 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-10 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&hub_port2>;
+		};
+
+		led-11 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led-12 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&hub_port1>;
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+};
+
+&eth0port {
+	phy-handle = <&ethphy9>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc@30 {
+		compatible = "s35390a";
+		reg = <0x30>;
+	};
+
+	lm63@4c {
+		compatible = "national,lm63";
+		reg = <0x4c>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy9: ethernet-phy@9 {
+		reg = <9>;
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <40>;
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x200000>;
+	};
+
+	partition@200000 {
+		label = "certificate";
+		reg = <0x0200000 0x100000>;
+	};
+
+	partition@300000 {
+		label = "preset_cfg";
+		reg = <0x0300000 0x100000>;
+	};
+
+	partition@400000 {
+		label = "dev_params";
+		reg = <0x0400000 0x100000>;
+	};
+
+	partition@500000 {
+		label = "active_bank";
+		reg = <0x0500000 0x0100000>;
+	};
+
+	partition@600000 {
+		label = "magic";
+		reg = <0x0600000 0x0100000>;
+	};
+
+	partition@700000 {
+		label = "bank1";
+		reg = <0x0700000 0x2800000>;
+	};
+
+	partition@2f00000 {
+		label = "bank2";
+		reg = <0x2f00000 0x2800000>;
+	};
+
+	/* 0x5700000-0x5a00000 undefined in vendor firmware */
+
+	partition@5a00000 {
+		label = "reserved";
+		reg = <0x5a00000 0x2000000>;
+	};
+
+	partition@7a00000 {
+		label = "rootfs";
+		reg = <0x7a00000 0x8600000>;
+	};
+};
+
+&pinctrl {
+	/* Buzzer gpios are connected to two pins of buzzer.
+	 * This buzzer require a modulated signal from gpio.
+	 * Leave it as is due lack of proper driver.
+	 */
+	pmx_buzzer: pmx-buzzer {
+		marvell,pins = "mpp12", "mpp13";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp14", "mpp15", "mpp16", "mpp17", "mpp38",
+			       "mpp39", "mpp40", "mpp42", "mpp43", "mpp44",
+			       "mpp45", "mpp46", "mpp47";
+		marvell,function = "gpio";
+	};
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp28", "mpp29", "mpp48", "mpp49";
+		marvell,function = "gpio";
+	};
+
+	pmx_poweroff: pmx-poweroff {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	port@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+		#trigger-source-cells = <0>;
+
+		hub_port1: port@1 {
+			reg = <1>;
+			#trigger-source-cells = <0>;
+		};
+
+		hub_port2: port@2 {
+			reg = <2>;
+			#trigger-source-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts
index 555b7e4c58a5..151edcd140a0 100644
--- a/arch/arm/boot/dts/kirkwood-cloudbox.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "kirkwood.dtsi"
@@ -57,10 +58,8 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		power {
+		key-power {
 			label = "Power push button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
@@ -70,11 +69,11 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		red-fail {
+		led-red-fail {
 			label = "cloudbox:red:fail";
 			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
 		};
-		blue-sata {
+		led-blue-sata {
 			label = "cloudbox:blue:sata";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-d2net.dts b/arch/arm/boot/dts/marvell/kirkwood-d2net.dts
index e1c25c35e9ce..fcce8730d3e3 100644
--- a/arch/arm/boot/dts/kirkwood-d2net.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-d2net.dts
@@ -1,11 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree file for d2 Network v2
  *
  * Copyright (C) 2014 Simon Guinot <simon.guinot@sequanux.org>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
 */
 
 /dts-v1/;
@@ -39,7 +37,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		red-fail {
+		led-red-fail {
 			label = "d2net_v2:red:fail";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/marvell/kirkwood-db-88f6281.dts
new file mode 100644
index 000000000000..a9a8e6b744c7
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-db-88f6281.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell DB-88F6281-BP Development Board Setup
+ *
+ * Saeed Bishara <saeed@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood-db.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Marvell DB-88F6281-BP Development Board";
+	compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/marvell/kirkwood-db-88f6282.dts
new file mode 100644
index 000000000000..6dc6579d4524
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-db-88f6282.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell DB-88F6282-BP Development Board Setup
+ *
+ * Saeed Bishara <saeed@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood-db.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "Marvell DB-88F6282-BP Development Board";
+	compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/marvell/kirkwood-db.dtsi
index 812df691ae3d..8bacaeb4f4bd 100644
--- a/arch/arm/boot/dts/kirkwood-db.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-db.dtsi
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Marvell DB-{88F6281,88F6282}-BP Development Board Setup
  *
  * Saeed Bishara <saeed@marvell.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
  * This file contains the definitions that are common between the 6281
  * and 6282 variants of the Marvell Kirkwood Development Board.
  */
@@ -42,7 +39,7 @@
 			status = "okay";
 		};
 
-		ehci@50000 {
+		usb@50000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
index 4d2b15d6244a..36394d1ab3e2 100644
--- a/arch/arm/boot/dts/kirkwood-dir665.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
@@ -1,9 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2014 Claudio Leite <leitec@staticky.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
@@ -80,7 +78,7 @@
 
 		spi@10600 {
 			status = "okay";
-			m25p80@0 {
+			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
@@ -131,7 +129,7 @@
 			status = "okay";
 		};
 
-		ehci@50000 {
+		usb@50000 {
 			status = "okay";
 		};
 	};
@@ -139,38 +137,38 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		blue-usb {
+		led-blue-usb {
 			label = "dir665:blue:usb";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
-		blue-internet {
+		led-blue-internet {
 			/* Can only be turned on if the Internet
 			 * Ethernet port has Link
 			 */
 			label = "dir665:blue:internet";
 			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
 		};
-		amber-internet {
+		led-amber-internet {
 			label = "dir665:amber:internet";
 			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 		};
-		blue-wifi5g {
+		led-blue-wifi5g {
 			label = "dir665:blue:5g";
 			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 		};
-		blue-status {
+		led-blue-status {
 			label = "dir665:blue:status";
 			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		};
-		blue-wps {
+		led-blue-wps {
 			label = "dir665:blue:wps";
 			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		};
-		amber-status {
+		led-amber-status {
 			label = "dir665:amber:status";
 			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
 		};
-		blue-24g {
+		led-blue-24g {
 			label = "dir665:blue:24g";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 		};
@@ -178,67 +176,18 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		reset {
+		button-reset {
 			label = "reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
 		};
-		wps {
+		button-wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
 	};
-
-	dsa {
-		status = "disabled";
-
-		compatible = "marvell,dsa";
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		dsa,ethernet = <&eth0port>;
-		dsa,mii-bus = <&mdio>;
-
-		switch@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0 0>;	/* MDIO address 0, switch 0 in tree */
-
-			port@0 {
-				reg = <0>;
-				label = "lan4";
-			};
-
-			port@1 {
-			       reg = <1>;
-			       label = "lan3";
-			};
-
-			port@2 {
-			       reg = <2>;
-			       label = "lan2";
-			};
-
-			port@3 {
-			       reg = <3>;
-			       label = "lan1";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "wan";
-			};
-
-			port@6 {
-			       reg = <6>;
-			       label = "cpu";
-			};
-		};
-	};
 };
 
 &mdio {
@@ -260,18 +209,18 @@
 			};
 
 			port@1 {
-			       reg = <1>;
-			       label = "lan3";
+				reg = <1>;
+				label = "lan3";
 			};
 
 			port@2 {
-			       reg = <2>;
-			       label = "lan2";
+				reg = <2>;
+				label = "lan2";
 			};
 
 			port@3 {
-			       reg = <3>;
-			       label = "lan1";
+				reg = <3>;
+				label = "lan1";
 			};
 
 			port@4 {
@@ -281,7 +230,7 @@
 
 			port@6 {
 				reg = <6>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;
@@ -300,6 +249,7 @@
 	ethernet0-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
@@ -317,7 +267,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/marvell/kirkwood-dns320.dts
index d85ef0a91b50..d8279e0c4c4f 100644
--- a/arch/arm/boot/dts/kirkwood-dns320.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dns320.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "kirkwood-dnskw.dtsi"
@@ -23,24 +24,24 @@
 			     &pmx_led_white_usb>;
 		pinctrl-names = "default";
 
-		blue-power {
+		led-blue-power {
 			label = "dns320:blue:power";
 			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
-		blue-usb {
+		led-blue-usb {
 			label = "dns320:blue:usb";
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
-		orange-l_hdd {
+		led-orange-l_hdd {
 			label = "dns320:orange:l_hdd";
 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
 		};
-		orange-r_hdd {
+		led-orange-r_hdd {
 			label = "dns320:orange:r_hdd";
 			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
 		};
-		orange-usb {
+		led-orange-usb {
 			label = "dns320:orange:usb";
 			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; /* GPIO 35 */
 		};
diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/marvell/kirkwood-dns325.dts
index 5e586ed04c58..7f396195e977 100644
--- a/arch/arm/boot/dts/kirkwood-dns325.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dns325.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "kirkwood-dnskw.dtsi"
@@ -23,24 +24,24 @@
 			     &pmx_led_white_usb>;
 		pinctrl-names = "default";
 
-		white-power {
+		led-white-power {
 			label = "dns325:white:power";
 			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
-		white-usb {
+		led-white-usb {
 			label = "dns325:white:usb";
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */
 		};
-		red-l_hdd {
+		led-red-l_hdd {
 			label = "dns325:red:l_hdd";
 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
 		};
-		red-r_hdd {
+		led-red-r_hdd {
 			label = "dns325:red:r_hdd";
 			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
 		};
-		red-usb {
+		led-red-usb {
 			label = "dns325:red:usb";
 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
index d8fca9db46d0..20bcd031f3f5 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #include "kirkwood.dtsi"
 #include "kirkwood-6281.dtsi"
 
@@ -7,23 +8,21 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_power &pmx_button_unmount
 			     &pmx_button_reset>;
 		pinctrl-names = "default";
 
-		power {
+		button-power {
 			label = "Power button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
 		};
-		eject {
+		button-eject {
 			label = "USB unmount button";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
@@ -35,11 +34,11 @@
 		compatible = "gpio-fan";
 		pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>;
 		pinctrl-names = "default";
-		gpios = <&gpio1 14 GPIO_ACTIVE_LOW
-			 &gpio1 13 GPIO_ACTIVE_LOW>;
-		gpio-fan,speed-map = <0    0
-				      3000 1
-				      6000 2>;
+		gpios = <&gpio1 14 GPIO_ACTIVE_HIGH
+			 &gpio1 13 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0    0>,
+				     <3000 1>,
+				     <6000 2>;
 	};
 
 	gpio_poweroff {
diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts
index 849736349511..090f1e2e5bb6 100644
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "kirkwood.dtsi"
@@ -33,7 +34,7 @@
 			};
 		};
 		serial@12000 {
-			status = "ok";
+			status = "okay";
 		};
 	};
 	gpio-leds {
@@ -41,12 +42,12 @@
 		pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
 		pinctrl-names = "default";
 
-		health {
+		led-health {
 			label = "status:green:health";
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
-		fault {
+		led-fault {
 			label = "status:orange:fault";
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts
index e2abc8246bf3..590bee3c561c 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "kirkwood.dtsi"
@@ -33,7 +34,7 @@
 			};
 		};
 		serial@12000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		spi@10600 {
@@ -84,15 +85,15 @@
 			     &pmx_led_wifi_ap >;
 		pinctrl-names = "default";
 
-		bluetooth {
+		led-bluetooth {
 			label = "dreamplug:blue:bluetooth";
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		wifi {
+		led-wifi {
 			label = "dreamplug:green:wifi";
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 		};
-		wifi-ap {
+		led-wifi-ap {
 			label = "dreamplug:green:wifi_ap";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-ds109.dts b/arch/arm/boot/dts/marvell/kirkwood-ds109.dts
index d4bcc1c7f6b3..29982e7acb7f 100644
--- a/arch/arm/boot/dts/kirkwood-ds109.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds109.dts
@@ -1,10 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Andrew Lunn <andrew@lunn.ch>
  * Ben Peddell <klightspeed@killerwolves.net>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/kirkwood-ds110jv10.dts b/arch/arm/boot/dts/marvell/kirkwood-ds110jv10.dts
index 95bf83b91b4a..d68c616e9309 100644
--- a/arch/arm/boot/dts/kirkwood-ds110jv10.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds110jv10.dts
@@ -1,10 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Andrew Lunn <andrew@lunn.ch>
  * Ben Peddell <klightspeed@killerwolves.net>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/kirkwood-ds111.dts b/arch/arm/boot/dts/marvell/kirkwood-ds111.dts
index a85a4664431b..e1420cbcd7e4 100644
--- a/arch/arm/boot/dts/kirkwood-ds111.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds111.dts
@@ -1,10 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Andrew Lunn <andrew@lunn.ch>
  * Ben Peddell <klightspeed@killerwolves.net>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/marvell/kirkwood-ds112.dts
index 6cef4bdbc01b..3912f1b525b6 100644
--- a/arch/arm/boot/dts/kirkwood-ds112.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds112.dts
@@ -1,10 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Andrew Lunn <andrew@lunn.ch>
  * Ben Peddell <klightspeed@killerwolves.net>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
@@ -45,7 +43,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie1 {
diff --git a/arch/arm/boot/dts/kirkwood-ds209.dts b/arch/arm/boot/dts/marvell/kirkwood-ds209.dts
index 6d25093a9ac4..f41fe95e055f 100644
--- a/arch/arm/boot/dts/kirkwood-ds209.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds209.dts
@@ -1,10 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Andrew Lunn <andrew@lunn.ch>
  * Ben Peddell <klightspeed@killerwolves.net>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/kirkwood-ds210.dts b/arch/arm/boot/dts/marvell/kirkwood-ds210.dts
index 2f1933efcac1..729f959a7838 100644
--- a/arch/arm/boot/dts/kirkwood-ds210.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds210.dts
@@ -1,10 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Andrew Lunn <andrew@lunn.ch>
  * Ben Peddell <klightspeed@killerwolves.net>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/kirkwood-ds212.dts b/arch/arm/boot/dts/marvell/kirkwood-ds212.dts
index 7f32e7abffac..416bab50d170 100644
--- a/arch/arm/boot/dts/kirkwood-ds212.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds212.dts
@@ -1,10 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Andrew Lunn <andrew@lunn.ch>
  * Ben Peddell <klightspeed@killerwolves.net>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/kirkwood-ds212j.dts b/arch/arm/boot/dts/marvell/kirkwood-ds212j.dts
index f5c4213fc67c..14cf4d8afaf3 100644
--- a/arch/arm/boot/dts/kirkwood-ds212j.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds212j.dts
@@ -1,10 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Andrew Lunn <andrew@lunn.ch>
  * Ben Peddell <klightspeed@killerwolves.net>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/kirkwood-ds409.dts b/arch/arm/boot/dts/marvell/kirkwood-ds409.dts
index e80a962ebba0..a8650f9e3eb7 100644
--- a/arch/arm/boot/dts/kirkwood-ds409.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds409.dts
@@ -1,10 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Andrew Lunn <andrew@lunn.ch>
  * Ben Peddell <klightspeed@killerwolves.net>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ds409slim.dts b/arch/arm/boot/dts/marvell/kirkwood-ds409slim.dts
new file mode 100644
index 000000000000..27a1d840bd15
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds409slim.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology 409slim";
+	compatible = "synology,ds409slim", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-20 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds411.dts b/arch/arm/boot/dts/marvell/kirkwood-ds411.dts
index 72e58307416d..1d4256ef325d 100644
--- a/arch/arm/boot/dts/kirkwood-ds411.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds411.dts
@@ -1,10 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Andrew Lunn <andrew@lunn.ch>
  * Ben Peddell <klightspeed@killerwolves.net>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
@@ -49,7 +47,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie1 {
diff --git a/arch/arm/boot/dts/kirkwood-ds411j.dts b/arch/arm/boot/dts/marvell/kirkwood-ds411j.dts
index 3348e330f074..bb3200daea1e 100644
--- a/arch/arm/boot/dts/kirkwood-ds411j.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds411j.dts
@@ -1,10 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Andrew Lunn <andrew@lunn.ch>
  * Ben Peddell <klightspeed@killerwolves.net>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/kirkwood-ds411slim.dts b/arch/arm/boot/dts/marvell/kirkwood-ds411slim.dts
index aaaf31b81522..9c5364a4e0a8 100644
--- a/arch/arm/boot/dts/kirkwood-ds411slim.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds411slim.dts
@@ -1,10 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Andrew Lunn <andrew@lunn.ch>
  * Ben Peddell <klightspeed@killerwolves.net>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts
index aa60a0b049a7..d5ac4e3974da 100644
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "kirkwood.dtsi"
@@ -65,7 +66,7 @@
 			};
 		};
 		serial@12000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		sata@80000 {
@@ -84,44 +85,44 @@
 			    >;
 		pinctrl-names = "default";
 
-		health {
+		led-health {
 			label = "status:green:health";
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
-		fault {
+		led-fault {
 			label = "status:orange:fault";
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		left0 {
+		led-left0 {
 			label = "status:white:left0";
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
-		left1 {
+		led-left1 {
 			label = "status:white:left1";
 			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 		};
-		left2 {
+		led-left2 {
 			label = "status:white:left2";
 			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 		};
-		left3 {
+		led-left3 {
 			label = "status:white:left3";
 			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		};
-		right0 {
+		led-right0 {
 			label = "status:white:right0";
 			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 		};
-		right1 {
+		led-right1 {
 			label = "status:white:right1";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		};
-		right2 {
+		led-right2 {
 			label = "status:white:right2";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		};
-		right3 {
+		led-right3 {
 			label = "status:white:right3";
 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts
index b2d9834bf458..d5aa8b505cc0 100644
--- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "kirkwood.dtsi"
@@ -37,7 +38,7 @@
 			};
 		};
 		serial@12000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		sata@80000 {
@@ -58,19 +59,19 @@
 			      &pmx_led_wmode_r &pmx_led_wmode_g >;
 		pinctrl-names = "default";
 
-		health-r {
+		led-health-r {
 			label = "guruplug:red:health";
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
-		health-g {
+		led-health-g {
 			label = "guruplug:green:health";
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		wmode-r {
+		led-wmode-r {
 			label = "guruplug:red:wmode";
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 		};
-		wmode-g {
+		led-wmode-g {
 			label = "guruplug:green:wmode";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
index 5bf62897014c..018c6b8f3e8a 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "kirkwood.dtsi"
@@ -57,17 +58,15 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>;
 		pinctrl-names = "default";
 
-		copy {
+		button-copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
@@ -80,16 +79,16 @@
 			     &pmx_led_usb_transfer>;
 		pinctrl-names = "default";
 
-		green-os {
+		led-green-os {
 			label = "ib62x0:green:os";
 			gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
-		red-os {
+		led-red-os {
 			label = "ib62x0:red:os";
 			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
 		};
-		usb-copy {
+		led-usb-copy {
 			label = "ib62x0:red:usb_copy";
 			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
index d25184ae4af3..91b46e77e0b6 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "kirkwood.dtsi"
@@ -71,7 +72,7 @@
 			};
 		};
 		serial@12000 {
-			status = "ok";
+			status = "okay";
 		};
 	};
 
@@ -88,32 +89,32 @@
 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
-		power-blue {
+		led-power-blue {
 			label = "power:blue";
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
-		power-red {
+		led-power-red {
 			label = "power:red";
 			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 		};
-		usb1 {
+		led-usb1 {
 			label = "usb1:blue";
 			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 		};
-		usb2 {
+		led-usb2 {
 			label = "usb2:blue";
 			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		};
-		usb3 {
+		led-usb3 {
 			label = "usb3:blue";
 			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 		};
-		usb4 {
+		led-usb4 {
 			label = "usb4:blue";
 			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		};
-		otb {
+		led-otb {
 			label = "otb:blue";
 			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
 		};
@@ -121,18 +122,16 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
 		pinctrl-names = "default";
 
-		otb {
+		button-otb {
 			label = "OTB Button";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 			debounce-interval = <100>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
@@ -186,7 +185,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
index 8474bffec0ca..039362152650 100644
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "kirkwood.dtsi"
@@ -111,7 +112,7 @@
 		};
 
 		serial@12000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		sata@80000 {
@@ -126,44 +127,42 @@
 			      &pmx_led_rebuild &pmx_led_health >;
 		pinctrl-names = "default";
 
-		power_led {
+		led-power-led {
 			label = "status:white:power_led";
 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
-		rebuild_led {
+		led-rebuild-led {
 			label = "status:white:rebuild_led";
 			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 		};
-		health_led {
+		led-health-led {
 			label = "status:red:health_led";
 			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 		};
-		backup_led {
+		led-backup-led {
 			label = "status:blue:backup_led";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
 	};
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_reset &pmx_button_power
 			     &pmx_button_otb>;
 		pinctrl-names = "default";
 
 
-		Power {
+		button-power {
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
 		};
-		Reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
 		};
-		OTB {
+		button-otb {
 			label = "OTB Button";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/marvell/kirkwood-is2.dts
index 4121674abd1c..1bc16a5cdbaa 100644
--- a/arch/arm/boot/dts/kirkwood-is2.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-is2.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include <dt-bindings/leds/leds-ns2.h>
diff --git a/arch/arm/boot/dts/kirkwood-km_common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-km_common.dtsi
index 7962bdefde49..259cb3d5f16d 100644
--- a/arch/arm/boot/dts/kirkwood-km_common.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-km_common.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 / {
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
@@ -26,8 +27,8 @@
 
 	i2c {
 		compatible = "i2c-gpio";
-		gpios = < &gpio0 8 GPIO_ACTIVE_HIGH		/* sda */
-			  &gpio0 9 GPIO_ACTIVE_HIGH>;		/* scl */
+		sda-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 	};
 };
@@ -38,7 +39,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-km_fixedeth.dts b/arch/arm/boot/dts/marvell/kirkwood-km_fixedeth.dts
index 9895f2b10f8a..515be7bccc0a 100644
--- a/arch/arm/boot/dts/kirkwood-km_fixedeth.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-km_fixedeth.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "kirkwood.dtsi"
diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/marvell/kirkwood-km_kirkwood.dts
index 235bf382fff9..f035eff1c111 100644
--- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-km_kirkwood.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "kirkwood.dtsi"
diff --git a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
new file mode 100644
index 000000000000..974bc9de4702
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
@@ -0,0 +1,440 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Check Point L-50 Board Description
+ * Copyright 2020 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Check Point L-50";
+	compatible = "checkpoint,l-50", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_led38 &pmx_sysrst &pmx_button29>;
+			pinctrl-names = "default";
+
+			pmx_sysrst: pmx-sysrst {
+				marvell,pins = "mpp6";
+				marvell,function = "sysrst";
+			};
+
+			pmx_button29: pmx_button29 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_led38: pmx_led38 {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		mvsdio@90000 {
+			status = "okay";
+			cd-gpios = <&gpio1 14 9>;
+		};
+
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			gpio2: gpio-expander@20 {
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				compatible = "semtech,sx1505q";
+				reg = <0x20>;
+
+				gpio-controller;
+			};
+
+			/* Three GPIOs from 0x21 exp. are undescribed in dts:
+			 * 1: DSL module reset (active low)
+			 * 5: mPCIE reset (active low)
+			 * 6: Express card reset (active low)
+			 */
+			gpio3: gpio-expander@21 {
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				compatible = "semtech,sx1505q";
+				reg = <0x21>;
+
+				gpio-controller;
+			};
+
+			rtc@30 {
+				compatible = "s35390a";
+				reg = <0x30>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status-green {
+			label = "l-50:green:status";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-status-red {
+			label = "l-50:red:status";
+			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wifi {
+			label = "l-50:green:wifi";
+			gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		led-internet-green {
+			label = "l-50:green:internet";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-internet-red {
+			label = "l-50:red:internet";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb1-green {
+			label = "l-50:green:usb1";
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&hub_port3>;
+		};
+
+		led-usb1-red {
+			label = "l-50:red:usb1";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb2-green {
+			label = "l-50:green:usb2";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&hub_port1>;
+		};
+
+		led-usb2-red {
+			label = "l-50:red:usb2";
+			gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	usb2_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "usb2_pwr";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	usb1_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_pwr";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	mpcie_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "mpcie_pwr";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	express_card_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "express_card_pwr";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		button-factory-defaults {
+			label = "factory_defaults";
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy8: ethernet-phy@8 {
+		reg = <0x08>;
+	};
+
+	switch0: switch@10 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+		dsa,member = <0 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan5";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan1";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan6";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan2";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan7";
+			};
+
+			switch0port5: port@5 {
+				reg = <5>;
+				phy-mode = "rgmii-txid";
+				link = <&switch1port5>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@6 {
+				reg = <6>;
+				phy-mode = "rgmii-id";
+				ethernet = <&eth1port>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+
+	switch@11 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x11>;
+		dsa,member = <0 1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan3";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan8";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan4";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "dmz";
+			};
+
+			switch1port5: port@5 {
+				reg = <5>;
+				phy-mode = "rgmii-txid";
+				link = <&switch0port5>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "dsl";
+				fixed-link {
+					speed = <100>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy8>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+		phy-mode = "rgmii";
+	};
+};
+
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x00000000 0x000c0000>;
+	};
+
+	partition@a0000 {
+		label = "bootldr-env";
+		reg = <0x000c0000 0x00040000>;
+	};
+
+	partition@100000 {
+		label = "kernel-1";
+		reg = <0x00100000 0x00800000>;
+	};
+
+	partition@900000 {
+		label = "rootfs-1";
+		reg = <0x00900000 0x07100000>;
+	};
+
+	partition@7a00000 {
+		label = "kernel-2";
+		reg = <0x07a00000 0x00800000>;
+	};
+
+	partition@8200000 {
+		label = "rootfs-2";
+		reg = <0x08200000 0x07100000>;
+	};
+
+	partition@f300000 {
+		label = "default_sw";
+		reg = <0x0f300000 0x07900000>;
+	};
+
+	partition@16c00000 {
+		label = "logs";
+		reg = <0x16c00000 0x01800000>;
+	};
+
+	partition@18400000 {
+		label = "preset_cfg";
+		reg = <0x18400000 0x00100000>;
+	};
+
+	partition@18500000 {
+		label = "adsl";
+		reg = <0x18500000 0x00100000>;
+	};
+
+	partition@18600000 {
+		label = "storage";
+		reg = <0x18600000 0x07a00000>;
+	};
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&sata_phy0 {
+	status = "disabled";
+};
+
+&sata_phy1 {
+	status = "disabled";
+};
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	port@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+		#trigger-source-cells = <0>;
+
+		hub_port1: port@1 {
+			reg = <1>;
+			#trigger-source-cells = <0>;
+		};
+
+		hub_port3: port@3 {
+			reg = <3>;
+			#trigger-source-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/marvell/kirkwood-laplug.dts
index 1b0f070c2676..90ea6cdee8e0 100644
--- a/arch/arm/boot/dts/kirkwood-laplug.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-laplug.dts
@@ -1,9 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2013 Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
@@ -53,7 +51,7 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		power {
+		button-power {
 			label = "Power push button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
@@ -63,11 +61,11 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		red-fail {
+		led-red-fail {
 			label = "laplug_v2:red:power";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
-		blue-power {
+		led-blue-power {
 			label = "laplug_v2:blue:power";
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
@@ -162,7 +160,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi b/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi
new file mode 100644
index 000000000000..dfac2045a1eb
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree common file for kirkwood-6282 based Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-linkstation.dtsi"
+
+/ {
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd0: pmx-power-hdd0 {
+				marvell,pins = "mpp8";
+				marvell,function = "gpio";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high: pmx-fan-high {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+			pmx_fan_low: pmx-fan-low {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function-red {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_fan_lock: pmx-fan-lock {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio_keys {
+		function-button {
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+
+		power-on-switch {
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+
+		power-auto-switch {
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		red-alarm-led {
+			label = "linkstation:red:alarm";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-function-led {
+			label = "linkstation:red:function";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		amber-info-led {
+			label = "linkstation:amber:info";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue-function-led {
+			label = "linkstation:blue:function";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue-power-led {
+			label = "linkstation:blue:power";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+
+		gpios = <&gpio0 17 GPIO_ACTIVE_LOW
+			 &gpio0 16 GPIO_ACTIVE_LOW>;
+
+		gpio-fan,speed-map =
+				<   0 3>,
+				<1500 2>,
+				<3250 1>,
+				<5000 0>;
+
+		alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulators {
+		usb_power: regulator@1 {
+			gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		hdd_power0: regulator@2 {
+			gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation-duo-6281.dtsi b/arch/arm/boot/dts/marvell/kirkwood-linkstation-duo-6281.dtsi
new file mode 100644
index 000000000000..ba629e02ba31
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-duo-6281.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree common file for kirkwood-6281 based 2-Bay Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-linkstation.dtsi"
+
+/ {
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd0: pmx-power-hdd0 {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_power_hdd1: pmx-power-hdd1 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function-red {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+		};
+
+		sata@80000 {
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_keys {
+		function-button {
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		power-on-switch {
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		power-auto-switch {
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		red-alarm-led {
+			label = "linkstation:red:alarm";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+
+		red-function-led {
+			label = "linkstation:red:function";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		amber-info-led {
+			label = "linkstation:amber:info";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		blue-function-led {
+			label = "linkstation:blue:function";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		blue-power-led {
+			label = "linkstation:blue:power";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+
+	regulators {
+		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
+
+		usb_power: regulator@1 {
+			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		hdd_power0: regulator@2 {
+			gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+
+		hdd_power1: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "HDD1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy1: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation-lsqvl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lsqvl.dts
new file mode 100644
index 000000000000..8bb381088910
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lsqvl.dts
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Buffalo Linkstation LS-QVL
+ *
+ * Copyright (C) 2016, Mario Lange <mario_lange@gmx.net>
+ *
+ * Based on kirkwood-linkstation-lswvl.dts,
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-6282.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-QVL";
+	compatible = "buffalo,lsqvl", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd1: pmx-power-hdd1 {
+				marvell,pins = "mpp9";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr0: pmx-led-hdderr0 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr1: pmx-led-hdderr1 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr2: pmx-led-hdderr2 {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr3: pmx-led-hdderr3 {
+				marvell,pins = "mpp25";
+				marvell,function = "gpio";
+			};
+		};
+
+		sata@80000 {
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_leds {
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue
+			     &pmx_led_hdderr0
+			     &pmx_led_hdderr1
+			     &pmx_led_hdderr2
+			     &pmx_led_hdderr3>;
+
+		red-hdderr0-led {
+			label = "linkstation:red:hdderr0";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		red-hdderr1-led {
+			label = "linkstation:red:hdderr1";
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+		};
+
+		red-hdderr2-led {
+			label = "linkstation:red:hdderr2";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		red-hdderr3-led {
+			label = "linkstation:red:hdderr3";
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators {
+		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
+
+		hdd_power1: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "HDD1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation-lsvl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lsvl.dts
new file mode 100644
index 000000000000..3f2a0bfe03ed
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lsvl.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Buffalo Linkstation LS-VL
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-6282.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-VL";
+	compatible = "buffalo,lsvl", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswsxl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswsxl.dts
new file mode 100644
index 000000000000..c42d0da38fe7
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswsxl.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Buffalo Linkstation LS-WSXL
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-duo-6281.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-WSXL";
+	compatible = "buffalo,lswsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswvl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswvl.dts
new file mode 100644
index 000000000000..e0f62adc0d5d
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswvl.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Buffalo Linkstation LS-WVL
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-6282.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-WVL";
+	compatible = "buffalo,lswvl","marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd1: pmx-power-hdd1 {
+				marvell,pins = "mpp9";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr0: pmx-led-hdderr0 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr1: pmx-led-hdderr1 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+		};
+
+		sata@80000 {
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_leds {
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue
+			     &pmx_led_hdderr0
+			     &pmx_led_hdderr1>;
+
+		red-hdderr0-led {
+			label = "linkstation:red:hdderr0";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-hdderr1-led {
+			label = "linkstation:red:hdderr1";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators {
+		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
+
+		hdd_power1: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "HDD1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts
new file mode 100644
index 000000000000..0425df8cb91c
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Buffalo Linkstation LS-WXL
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-duo-6281.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-WXL";
+	compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_led_hdderr0: pmx-led-hdderr0 {
+				marvell,pins = "mpp8";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr1: pmx-led-hdderr1 {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_fan_lock: pmx-fan-lock {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high: pmx-fan-high {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_fan_low: pmx-fan-low {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio_leds {
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue
+			     &pmx_led_hdderr0
+			     &pmx_led_hdderr1>;
+
+		red-hdderr0-led {
+			label = "linkstation:red:hdderr0";
+			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-hdderr1-led {
+			label = "linkstation:red:hdderr1";
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+
+		gpios = <&gpio1 16 GPIO_ACTIVE_LOW
+			 &gpio1 15 GPIO_ACTIVE_LOW>;
+
+		gpio-fan,speed-map =
+				<   0 3>,
+				<1500 2>,
+				<3250 1>,
+				<5000 0>;
+
+		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi
new file mode 100644
index 000000000000..8a11d2b9d449
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree common file for kirkwood based Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ */
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd0: pmx-power-hdd0 {
+				marvell,function = "gpio";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function-red {
+				marvell,function = "gpio";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p40@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p40", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <25000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x60000>;
+					label = "uboot";
+					read-only;
+				};
+
+				partition@60000 {
+					reg = <0x60000 0x10000>;
+					label = "dtb";
+					read-only;
+				};
+
+				partition@70000 {
+					reg = <0x70000 0x10000>;
+					label = "uboot_env";
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_button_function &pmx_power_switch
+			     &pmx_power_auto_switch>;
+		pinctrl-names = "default";
+
+		function-button {
+			label = "Function Button";
+			linux,code = <KEY_OPTION>;
+		};
+
+		power-on-switch {
+			label = "Power-on Switch";
+			linux,code = <KEY_RESERVED>;
+			linux,input-type = <5>;
+		};
+
+		power-auto-switch {
+			label = "Power-auto Switch";
+			linux,code = <KEY_ESC>;
+			linux,input-type = <5>;
+		};
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue>;
+		pinctrl-names = "default";
+	};
+
+	restart_poweroff {
+		compatible = "restart-poweroff";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_hdd0 &pmx_usb_vbus>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		hdd_power0: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "HDD0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
index df7851820507..8a1c38ab6111 100644
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * kirkwood-viper.dts - Device Tree file for Linksys viper (E4200v2 / EA4500)
  *
@@ -6,9 +7,6 @@
  * (c) 2014 Luka Perkov <luka@openwrt.org>
  * (c) 2014 Randy C. Will <randall.will@gmail.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
@@ -35,18 +33,16 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
 		pinctrl-names = "default";
 
-		wps {
+		button-wps {
 			label = "WPS Button";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
 
-		reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
@@ -58,63 +54,16 @@
 		pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
 		pinctrl-names = "default";
 
-		white-health {
+		led-white-health {
 			label = "viper:white:health";
 			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
 		};
 
-		white-pulse {
+		led-white-pulse {
 			label = "viper:white:pulse";
 			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
 		};
 	};
-
-	dsa {
-		status = "disabled";
-
-		compatible = "marvell,dsa";
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		dsa,ethernet = <&eth0port>;
-		dsa,mii-bus = <&mdio>;
-
-		switch@16,0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <16 0>;	/* MDIO address 16, switch 0 in tree */
-
-			port@0 {
-				reg = <0>;
-				label = "ethernet1";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "ethernet2";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "ethernet3";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "ethernet4";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "internet";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-			};
-		};
-	};
 };
 
 &pinctrl {
@@ -157,7 +106,7 @@
 			reg = <0x80000 0x20000>;
 		};
 
-		partition@A0000 {
+		partition@a0000 {
 			label = "s_env";
 			reg = <0xA0000 0x20000>;
 		};
@@ -167,17 +116,17 @@
 			reg = <0x200000 0x2A0000>;
 		};
 
-		partition@4A0000 {
+		partition@4a0000 {
 			label = "rootfs";
 			reg = <0x4A0000 0x1760000>;
 		};
 
-		partition@1C00000 {
+		partition@1c00000 {
 			label = "alt_kernel";
 			reg = <0x1C00000 0x2A0000>;
 		};
 
-		partition@1EA0000 {
+		partition@1ea0000 {
 			label = "alt_rootfs";
 			reg = <0x1EA0000 0x1760000>;
 		};
@@ -187,7 +136,7 @@
 			reg = <0x3600000 0x4A00000>;
 		};
 
-		partition@C0000 {
+		partition@c0000 {
 			label = "unused";
 			reg = <0xC0000 0x140000>;
 		};
@@ -247,7 +196,7 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;
@@ -270,6 +219,7 @@
 	ethernet0-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/marvell/kirkwood-lschlv2.dts
index e2fa368aef25..1d737d903f5f 100644
--- a/arch/arm/boot/dts/kirkwood-lschlv2.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-lschlv2.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "kirkwood-lsxl.dtsi"
diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/marvell/kirkwood-lsxhl.dts
index 8d89cdf8d6bf..a56e0d797778 100644
--- a/arch/arm/boot/dts/kirkwood-lsxhl.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-lsxhl.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "kirkwood-lsxl.dtsi"
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
index 8b7c6ce79a41..5e0b139dd4fb 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #include "kirkwood.dtsi"
 #include "kirkwood-6281.dtsi"
 
@@ -9,6 +10,11 @@
 
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
+			/* Non-default UART pins */
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp4", "mpp5";
+			};
+
 			pmx_power_hdd: pmx-power-hdd {
 				marvell,pins = "mpp10";
 				marvell,function = "gpo";
@@ -101,24 +107,22 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_function &pmx_power_switch
 			     &pmx_power_auto_switch>;
 		pinctrl-names = "default";
 
-		option {
+		button-option {
 			label = "Function Button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 		};
-		reserved {
+		button-reserved {
 			label = "Power-on Switch";
 			linux,code = <KEY_RESERVED>;
 			linux,input-type = <5>;
 			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
 		};
-		power {
+		button-power {
 			label = "Power-auto Switch";
 			linux,code = <KEY_ESC>;
 			linux,input-type = <5>;
@@ -133,28 +137,28 @@
 			     &pmx_led_function_blue>;
 		pinctrl-names = "default";
 
-		func_blue {
+		led-func-blue {
 			label = "lsxl:blue:func";
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 		};
 
-		alarm {
+		led-alarm {
 			label = "lsxl:red:alarm";
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 		};
 
-		info {
+		led-info {
 			label = "lsxl:amber:info";
 			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "lsxl:blue:power";
 			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
 
-		func_red {
+		led-func-red {
 			label = "lsxl:red:func";
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 		};
@@ -166,10 +170,11 @@
 		pinctrl-names = "default";
 		gpios = <&gpio0 19 GPIO_ACTIVE_LOW
 		         &gpio0 18 GPIO_ACTIVE_LOW>;
-		gpio-fan,speed-map = <0    3
-		                      1500 2
-		                      3250 1
-		                      5000 0>;
+		gpio-fan,speed-map =
+				<0    3>,
+				<1500 2>,
+				<3250 1>,
+				<5000 0>;
 		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -212,22 +217,11 @@
 &mdio {
 	status = "okay";
 
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
 	ethphy1: ethernet-phy@8 {
 		reg = <8>;
 	};
 };
 
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
 &eth1 {
 	status = "okay";
 	ethernet1-port@0 {
diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts
index aa413b0bcce2..6533b49a15b2 100644
--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "kirkwood.dtsi"
@@ -7,10 +8,10 @@
 	model = "MPL CEC4";
 	compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
-        memory {
-                device_type = "memory";
-                reg = <0x00000000 0x20000000>;
-        };
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
@@ -65,8 +66,8 @@
 			};
 		};
 
-                i2c@11000 {
-                        status = "okay";
+		i2c@11000 {
+			status = "okay";
 
 			rtc@51 {
 				compatible = "nxp,pcf8563";
@@ -78,7 +79,7 @@
 				reg = <0x57>;
 			};
 
-                };
+		};
 
 		serial@12000 {
 			status = "okay";
@@ -113,36 +114,36 @@
 			    >;
 		pinctrl-names = "default";
 
-		health {
+		led-health {
 			label = "status:green:health";
 			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 		};
 
-		user1o {
+		led-user1o {
 			label = "user1:orange";
 			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		user1g {
+		led-user1g {
 			label = "user1:green";
 			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		user0o {
+		led-user0o {
 			label = "user0:orange";
 			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		user0g {
+		led-user0g {
 			label = "user0:green";
 			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		misc {
+		led-misc {
 			label = "status:orange:misc";
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 			default-state = "on";
@@ -207,7 +208,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
new file mode 100644
index 000000000000..051579fc36b8
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell 88F6281 GTW GE Board
+ *
+ * Lennert Buytenhek <buytenh@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file contains the definitions that are common between the 6281
+ * and 6282 variants of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Marvell 88F6281 GTW GE Board";
+	compatible = "marvell,mv88f6281gtw-ge", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pin-controller@10000 {
+			pmx_usb_led: pmx-usb-led {
+				marvell,pins = "mpp12";
+				marvell,function = "gpo";
+			};
+
+			pmx_leds: pmx-leds {
+				marvell,pins = "mpp20", "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_keys: pmx-keys {
+				marvell,pins = "mpp46", "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <50000000>;
+				mode = <0>;
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		usb@50000 {
+			status = "okay";
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds &pmx_usb_led>;
+		pinctrl-names = "default";
+
+		led-green-status {
+			label = "gtw:green:Status";
+			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-red-status {
+			label = "gtw:red:Status";
+			gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green-usb {
+			label = "gtw:green:USB";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_keys>;
+		pinctrl-names = "default";
+
+		button-restart {
+			label = "SWR Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		button-wps {
+			label = "WPS Button";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "wan";
+			};
+
+			port@5 {
+				reg = <5>;
+				phy-mode = "rgmii-id";
+				ethernet = <&eth0port>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+		phy-mode = "rgmii";
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-nas2big.dts b/arch/arm/boot/dts/marvell/kirkwood-nas2big.dts
index f53bcacf6b63..0b0a15093146 100644
--- a/arch/arm/boot/dts/kirkwood-nas2big.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-nas2big.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree file for LaCie 2Big NAS
  *
@@ -5,9 +6,6 @@
  *
  * Author: Simon Guinot <simon.guinot@sequanux.org>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
 */
 
 /dts-v1/;
@@ -133,7 +131,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-net2big.dts b/arch/arm/boot/dts/marvell/kirkwood-net2big.dts
index 13a44773b6df..d5f6bb50ba11 100644
--- a/arch/arm/boot/dts/kirkwood-net2big.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-net2big.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree file for LaCie 2Big Network v2
  *
@@ -8,9 +9,6 @@
  * Based on netxbig_v2-setup.c,
  * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
 */
 
 /dts-v1/;
@@ -48,11 +46,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/marvell/kirkwood-net5big.dts
index d2d44df9c8c0..2497ad26b5b6 100644
--- a/arch/arm/boot/dts/kirkwood-net5big.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-net5big.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree file for LaCie 5Big Network v2
  *
@@ -8,9 +9,6 @@
  * Based on netxbig_v2-setup.c,
  * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
 */
 
 /dts-v1/;
@@ -80,11 +78,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
 	};
 
 	netxbig-leds {
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
index c0413b63cf2e..cb564c3bcdc4 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Device Tree file for NETGEAR ReadyNAS Duo v2
  *
  * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_nv+_v2.dts
index 2bfc6cfa151d..6cf76430cfab 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_nv+_v2.dts
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Device Tree file for NETGEAR ReadyNAS NV+ v2
  *
  * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
  */
 
 /dts-v1/;
@@ -82,11 +78,11 @@
 		};
 
 		clocks {
-		       g762_clk: g762-oscillator {
-				 compatible = "fixed-clock";
-				 #clock-cells = <0>;
-				 clock-frequency = <8192>;
-		       };
+			g762_clk: g762-oscillator {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <8192>;
+			};
 		};
 
 		i2c@11000 {
@@ -117,6 +113,20 @@
 		};
 	};
 
+	auxdisplay {
+		compatible = "hit,hd44780";
+		data-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>,
+				<&gpio1 1 GPIO_ACTIVE_HIGH>,
+				<&gpio1 3 GPIO_ACTIVE_HIGH>,
+				<&gpio1 17 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		rs-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		rw-gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		backlight-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		display-height-chars = <2>;
+		display-width-chars = <16>;
+	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 		pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_backup
@@ -256,7 +266,7 @@
 
 /* Connected to NEC uPD720200 USB 3.0 controller */
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi
index 52b58fe0c4fe..d4edf2727388 100644
--- a/arch/arm/boot/dts/kirkwood-netxbig.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree common file for LaCie 2Big and 5Big Network v2
  *
@@ -8,9 +9,6 @@
  * Based on netxbig_v2-setup.c,
  * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
 */
 
 #include <dt-bindings/leds/leds-netxbig.h>
@@ -55,26 +53,24 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		/*
 		 * esc and power represent a three position rocker
 		 * switch. Thus the conventional KEY_POWER does not fit
 		 */
-		exc {
+		button-exc {
 			label = "Back power switch (on|auto)";
 			linux,code = <KEY_ESC>;
 			linux,input-type = <5>;
 			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 		};
-		power {
+		button-power {
 			label = "Back power switch (auto|off)";
 			linux,code = <KEY_1>;
 			linux,input-type = <5>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 		};
-		option {
+		button-option {
 			label = "Function button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
index 282605f4c92c..d6b615cf6390 100644
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #include "kirkwood.dtsi"
 #include "kirkwood-6281.dtsi"
 
@@ -54,10 +55,8 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		power {
+		button-power {
 			label = "Power push button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
@@ -67,7 +66,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		red-fail {
+		led-red-fail {
 			label = "ns2:red:fail";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2.dts
index 190189d235e6..7b67083e1ec0 100644
--- a/arch/arm/boot/dts/kirkwood-ns2.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include <dt-bindings/leds/leds-ns2.h>
diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts
index 2c661add0cc0..686bcd6f0f3c 100644
--- a/arch/arm/boot/dts/kirkwood-ns2lite.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "kirkwood-ns2-common.dtsi"
@@ -23,7 +24,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		blue-sata {
+		led-blue-sata {
 			label = "ns2:blue:sata";
 			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "disk-activity";
diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts
index 55cc41d9c80c..044958bc55da 100644
--- a/arch/arm/boot/dts/kirkwood-ns2max.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include <dt-bindings/leds/leds-ns2.h>
@@ -28,15 +29,15 @@
 			 &gpio1  1 GPIO_ACTIVE_LOW
 			 &gpio0 23 GPIO_ACTIVE_LOW>;
 		gpio-fan,speed-map =
-			<   0  0
-			 1500 15
-			 1700 14
-			 1800 13
-			 2100 12
-			 3100 11
-			 3300 10
-			 4300  9
-			 5500  8>;
+			<   0  0>,
+			<1500 15>,
+			<1700 14>,
+			<1800 13>,
+			<2100 12>,
+			<3100 11>,
+			<3300 10>,
+			<4300  9>,
+			<5500  8>;
 		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
 	};
 
diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts
index 9935f3ec29b4..3fbe008f9141 100644
--- a/arch/arm/boot/dts/kirkwood-ns2mini.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include <dt-bindings/leds/leds-ns2.h>
@@ -29,15 +30,15 @@
 			 &gpio1  1 GPIO_ACTIVE_LOW
 			 &gpio0 23 GPIO_ACTIVE_LOW>;
 		gpio-fan,speed-map =
-			<   0  0
-			 3000 15
-			 3180 14
-			 4140 13
-			 4570 12
-			 6760 11
-			 7140 10
-			 7980  9
-			 9200  8>;
+			<   0  0>,
+			<3000 15>,
+			<3180 14>,
+			<4140 13>,
+			<4570 12>,
+			<6760 11>,
+			<7140 10>,
+			<7980  9>,
+			<9200  8>;
 		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
 	};
 
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts
index 0b69ee4934fa..3555ac1c3b15 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "kirkwood-nsa3x0-common.dtsi"
@@ -86,43 +87,43 @@
 			     &pmx_led_hdd_green &pmx_led_hdd_red>;
 		pinctrl-names = "default";
 
-		green-sys {
+		led-green-sys {
 			label = "nsa310:green:sys";
 			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 		};
-		red-sys {
+		led-red-sys {
 			label = "nsa310:red:sys";
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 		};
-		green-hdd {
+		led-green-hdd {
 			label = "nsa310:green:hdd";
 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 		};
-		red-hdd {
+		led-red-hdd {
 			label = "nsa310:red:hdd";
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
-		green-esata {
+		led-green-esata {
 			label = "nsa310:green:esata";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
-		red-esata {
+		led-red-esata {
 			label = "nsa310:red:esata";
 			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 		};
-		green-usb {
+		led-green-usb {
 			label = "nsa310:green:usb";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
-		red-usb {
+		led-red-usb {
 			label = "nsa310:red:usb";
 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 		};
-		green-copy {
+		led-green-copy {
 			label = "nsa310:green:copy";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		};
-		red-copy {
+		led-red-copy {
 			label = "nsa310:red:copy";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		};
@@ -130,7 +131,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts
index 3d2b3d494c19..ddf84092aade 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310a.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "kirkwood-nsa3x0-common.dtsi"
@@ -74,39 +75,39 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		green-sys {
+		led-green-sys {
 			label = "nsa310:green:sys";
 			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 		};
-		red-sys {
+		led-red-sys {
 			label = "nsa310:red:sys";
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 		};
-		green-hdd {
+		led-green-hdd {
 			label = "nsa310:green:hdd";
 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 		};
-		red-hdd {
+		led-red-hdd {
 			label = "nsa310:red:hdd";
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
-		green-esata {
+		led-green-esata {
 			label = "nsa310:green:esata";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
-		red-esata {
+		led-red-esata {
 			label = "nsa310:red:esata";
 			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 		};
-		green-usb {
+		led-green-usb {
 			label = "nsa310:green:usb";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
-		green-copy {
+		led-green-copy {
 			label = "nsa310:green:copy";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		};
-		red-copy {
+		led-red-copy {
 			label = "nsa310:red:copy";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts
new file mode 100644
index 000000000000..47deb93c90a5
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * ZyXEL NSA310S Board Description
+ * Copyright 2020-2022 Pawel Dembicki <paweldembicki@gmail.com>
+ * Copyright (c) 2015-2021, Tony Dinh <mibodhi@gmail.com>
+ * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
+ * Based upon the board setup file created by Peter Schildmann
+ */
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "ZyXEL NSA310S";
+	compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_pwr_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		button-power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-copy {
+			label = "Copy Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		};
+
+		button-reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		led-1 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usb-host";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_DISK;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "ata1";
+		};
+
+		led-4 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-6 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-7 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	usb0_power: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB Power";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	sata1_power: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA1 Power";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	thermal-zones {
+		disk-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <2000>;
+
+			thermal-sensors = <&hdd_temp>;
+
+			trips {
+				disk_alert: disk-alert {
+					temperature = <40000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				disk_crit: disk-crit {
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "htk,ht1382";
+		reg = <0x68>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+		phy-mode = "rgmii-id";
+		marvell,reg-init = <0x1 0x16 0x0 0x3>,
+				   <0x1 0x10 0x0 0x1017>,
+				   <0x1 0x11 0x0 0x4408>,
+				   <0x1 0x16 0x0 0x0>;
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <35>;
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x00c0000>;
+		read-only;
+	};
+	partition@c0000 {
+		label = "uboot_env";
+		reg = <0x00c0000 0x0080000>;
+	};
+	partition@140000 {
+		label = "ubi";
+		reg = <0x0140000 0x7ec0000>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp24", "mpp25", "mpp26";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp13", "mpp15", "mpp16", "mpp22", "mpp23",
+						"mpp28", "mpp29";
+		marvell,function = "gpio";
+	};
+
+	pmx_power: pmx-power {
+		marvell,pins = "mpp21", "mpp33";
+		marvell,function = "gpio";
+	};
+
+	pmx_pwr_off: pmx-pwr-off {
+		marvell,pins = "mpp27";
+		marvell,function = "gpio";
+	};
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <1>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hdd_temp: sata-port@0 {
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts
index 6ab104b4bb42..dd5c8ffc8781 100644
--- a/arch/arm/boot/dts/kirkwood-nsa320.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /* Device tree file for the Zyxel NSA 320 NAS box.
  *
  * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
  *
  * Based upon the board setup file created by Peter Schildmann */
 
@@ -145,39 +142,39 @@
 			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
 		pinctrl-names = "default";
 
-		green-sys {
+		led-green-sys {
 			label = "nsa320:green:sys";
 			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 		};
-		orange-sys {
+		led-orange-sys {
 			label = "nsa320:orange:sys";
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 		};
-		green-hdd1 {
+		led-green-hdd1 {
 			label = "nsa320:green:hdd1";
 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 		};
-		red-hdd1 {
+		led-red-hdd1 {
 			label = "nsa320:red:hdd1";
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
-		green-hdd2 {
+		led-green-hdd2 {
 			label = "nsa320:green:hdd2";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
-		red-hdd2 {
+		led-red-hdd2 {
 			label = "nsa320:red:hdd2";
 			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 		};
-		green-usb {
+		led-green-usb {
 			label = "nsa320:green:usb";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
-		green-copy {
+		led-green-copy {
 			label = "nsa320:green:copy";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		};
-		red-copy {
+		led-red-copy {
 			label = "nsa320:red:copy";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		};
@@ -214,7 +211,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-nsa325.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts
index 36c64816bf7f..f0786a5f2ce6 100644
--- a/arch/arm/boot/dts/kirkwood-nsa325.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /* Device tree file for the Zyxel NSA 325 NAS box.
  *
  * Copyright (c) 2015, Hans Ulli Kroll <ulli.kroll@googlemail.com>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
  *
  * Based upon the board setup file created by Peter Schildmann
  */
@@ -165,39 +162,39 @@
 			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
 		pinctrl-names = "default";
 
-		green-sys {
+		led-green-sys {
 			label = "nsa325:green:sys";
 			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 		};
-		orange-sys {
+		led-orange-sys {
 			label = "nsa325:orange:sys";
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 		};
-		green-hdd1 {
+		led-green-hdd1 {
 			label = "nsa325:green:hdd1";
 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 		};
-		red-hdd1 {
+		led-red-hdd1 {
 			label = "nsa325:red:hdd1";
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
-		green-hdd2 {
+		led-green-hdd2 {
 			label = "nsa325:green:hdd2";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
-		red-hdd2 {
+		led-red-hdd2 {
 			label = "nsa325:red:hdd2";
 			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 		};
-		green-usb {
+		led-green-usb {
 			label = "nsa325:green:usb";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
-		green-copy {
+		led-green-copy {
 			label = "nsa325:green:copy";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		};
-		red-copy {
+		led-red-copy {
 			label = "nsa325:red:copy";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		};
@@ -227,7 +224,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi
index e09b79ac73fd..e9bd9c551af5 100644
--- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #include "kirkwood.dtsi"
 #include "kirkwood-6281.dtsi"
 
@@ -44,7 +45,7 @@
 		};
 
 		serial@12000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		sata@80000 {
@@ -62,22 +63,20 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
 		pinctrl-names = "default";
 
-		power {
+		button-power {
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 		};
-		copy {
+		button-copy {
 			label = "Copy Button";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
@@ -149,7 +148,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
index c75da5f0ca48..20c6290d2037 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "kirkwood.dtsi"
@@ -114,10 +115,8 @@
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pmx_gpio_init>;
 		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		power {
+		button-power {
 			label = "Init Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
index cf2f5240e176..2bc4b68bd723 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree file for OpenBlocks A7 board
  *
@@ -5,9 +6,6 @@
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
@@ -46,14 +44,15 @@
 		i2c@11100 {
 			status = "okay";
 
-			s24c02: s24c02@50 {
+			s24c02: eeprom@50 {
 				compatible = "atmel,24c02";
 				reg = <0x50>;
 			};
 		};
 
 		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>;
+			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header
+				     &pmx_gpio_header_gpo>;
 			pinctrl-names = "default";
 
 			pmx_uart0: pmx-uart0 {
@@ -85,11 +84,16 @@
 			 * ground.
 			 */
 			pmx_gpio_header: pmx-gpio-header {
-				marvell,pins = "mpp17", "mpp7", "mpp29", "mpp28",
+				marvell,pins = "mpp17", "mpp29", "mpp28",
 					       "mpp35", "mpp34", "mpp40";
 				marvell,function = "gpio";
 			};
 
+			pmx_gpio_header_gpo: pxm-gpio-header-gpo {
+				marvell,pins = "mpp7";
+				marvell,function = "gpo";
+			};
+
 			pmx_gpio_init: pmx-init {
 				marvell,pins = "mpp38";
 				marvell,function = "gpio";
@@ -132,8 +136,6 @@
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pmx_gpio_init>;
 		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		button {
 			label = "Init Button";
diff --git a/arch/arm/boot/dts/kirkwood-openrd-base.dts b/arch/arm/boot/dts/marvell/kirkwood-openrd-base.dts
index 8af58999606d..094191ece3d7 100644
--- a/arch/arm/boot/dts/kirkwood-openrd-base.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openrd-base.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Marvell OpenRD Base Board Description
  *
  * Andrew Lunn <andrew@lunn.ch>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
  * This file contains the definitions that are specific to OpenRD
  * base variant of the Marvell Kirkwood Development Board.
  */
diff --git a/arch/arm/boot/dts/kirkwood-openrd-client.dts b/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts
index 96ff59d68f44..cf26e2ceaaa0 100644
--- a/arch/arm/boot/dts/kirkwood-openrd-client.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Marvell OpenRD Client Board Description
  *
  * Andrew Lunn <andrew@lunn.ch>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
  * This file contains the definitions that are specific to OpenRD
  * client variant of the Marvell Kirkwood Development Board.
  */
@@ -41,7 +38,7 @@
 		simple-audio-card,mclk-fs = <256>;
 
 		simple-audio-card,cpu {
-			sound-dai = <&audio0 0>;
+			sound-dai = <&audio0>;
 		};
 
 		simple-audio-card,codec {
diff --git a/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts b/arch/arm/boot/dts/marvell/kirkwood-openrd-ultimate.dts
index 9f12f8b53e24..888e13320c19 100644
--- a/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openrd-ultimate.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Marvell OpenRD Ultimate Board Description
  *
  * Andrew Lunn <andrew@lunn.ch>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
  * This file contains the definitions that are specific to OpenRD
  * ultimate variant of the Marvell Kirkwood Development Board.
  */
diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/marvell/kirkwood-openrd.dtsi
index 7175511a92da..9d7cff4feada 100644
--- a/arch/arm/boot/dts/kirkwood-openrd.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-openrd.dtsi
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Marvell OpenRD (Base|Client|Ultimate) Board Description
  *
  * Andrew Lunn <andrew@lunn.ch>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
  * This file contains the definitions that are common between the three
  * variants of the Marvell Kirkwood Development Board.
  */
@@ -56,7 +53,7 @@
 			cd-gpios = <&gpio0 29 9>;
 		};
 		gpio@10100 {
-			p28 {
+			p28-hog {
 				gpio-hog;
 				gpios = <28 GPIO_ACTIVE_HIGH>;
 				/*
@@ -74,7 +71,7 @@
 			};
 		};
 		gpio@10140 {
-			p2 {
+			p2-hog {
 				gpio-hog;
 				gpios = <2 GPIO_ACTIVE_HIGH>;
 				/*
diff --git a/arch/arm/boot/dts/kirkwood-pogo_e02.dts b/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts
index a190080c9c4f..39a5345332da 100644
--- a/arch/arm/boot/dts/kirkwood-pogo_e02.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * kirkwood-pogo_e02.dts - Device tree file for Pogoplug E02
  *
@@ -7,9 +8,6 @@
  *  Arch Linux ARM by Oleg Rakhmanov <moonman.ca@gmail.com>
  *  OpenWrt by Felix Kaechele <heffer@fedoraproject.org>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
@@ -35,12 +33,12 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		health {
+		led-health {
 			label = "pogo_e02:green:health";
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
-		fault {
+		led-fault {
 			label = "pogo_e02:orange:fault";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
index b2f26239d298..0e9c4cf79822 100644
--- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * kirkwood-pogoplug-series-4.dts - Device tree file for PogoPlug Series 4
  * inspired by the board files made by Kevin Mihelich for ArchLinux,
@@ -28,13 +29,11 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_eject>;
 		pinctrl-names = "default";
 
-		eject {
-			debounce_interval = <50>;
+		button-eject {
+			debounce-interval = <50>;
 			wakeup-source;
 			linux,code = <KEY_EJECTCD>;
 			label = "Eject Button";
@@ -47,12 +46,12 @@
 		pinctrl-0 = <&pmx_led_green &pmx_led_red>;
 		pinctrl-names = "default";
 
-		health {
+		led-health {
 			label = "pogoplugv4:green:health";
 			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
-		fault {
+		led-fault {
 			label = "pogoplugv4:red:fault";
 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/marvell/kirkwood-rd88f6192.dts
new file mode 100644
index 000000000000..f00325ffde07
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-rd88f6192.dts
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell RD88F6192 Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions that are common between the three
+ * variants of the Marvell Kirkwood Development Board.
+ */
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+
+/ {
+	model = "Marvell RD88F6192 reference design";
+	compatible = "marvell,rd88f6192", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_usb_power>;
+			pinctrl-names = "default";
+
+			pmx_usb_power: pmx-usb-power {
+				marvell,pins = "mpp10";
+				marvell,function = "gpo";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p128@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p128", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+			};
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "USB VBUS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts b/arch/arm/boot/dts/marvell/kirkwood-rd88f6281-a.dts
index 9ec5a65561e9..5da163591bbf 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-rd88f6281-a.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Marvell RD88F6181 A Board descrition
  *
  * Andrew Lunn <andrew@lunn.ch>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
  * This file contains the definitions for the board with the A0 or
  * higher stepping of the SoC. The ethernet switch does not have a
  * "wan" port.
diff --git a/arch/arm/boot/dts/marvell/kirkwood-rd88f6281-z0.dts b/arch/arm/boot/dts/marvell/kirkwood-rd88f6281-z0.dts
new file mode 100644
index 000000000000..72edd47e19ff
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-rd88f6281-z0.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell RD88F6181 Z0 stepping descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions for the board using the Z0
+ * stepping of the SoC. The ethernet switch has a "wan" port.
+*/
+
+/dts-v1/;
+
+#include "kirkwood-rd88f6281.dtsi"
+
+/ {
+	model = "Marvell RD88f6281 Reference design, with Z0 SoC";
+	compatible = "marvell,rd88f6281-z0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+};
+
+&eth1 {
+	status = "disabled";
+};
+
+&switch {
+	reg = <0>;
+
+	ports {
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/marvell/kirkwood-rd88f6281.dtsi
new file mode 100644
index 000000000000..9d62f910cddf
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-rd88f6281.dtsi
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell RD88F6181 Common Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions that are common between the two
+ * variants of the Marvell Kirkwood Development Board.
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-names = "default";
+
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
+			pinctrl-names = "default";
+			status = "okay";
+			cd-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+			/* No WP GPIO */
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x200000>;
+	};
+
+	partition@300000 {
+		label = "rootfs";
+		reg = <0x0300000 0x500000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	switch: switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+			};
+
+			port@5 {
+				reg = <5>;
+				phy-mode = "rgmii-id";
+				ethernet = <&eth0port>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rs212.dts b/arch/arm/boot/dts/marvell/kirkwood-rs212.dts
index 2c722ecd5331..4ad412115a24 100644
--- a/arch/arm/boot/dts/kirkwood-rs212.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-rs212.dts
@@ -1,10 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Andrew Lunn <andrew@lunn.ch>
  * Ben Peddell <klightspeed@killerwolves.net>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
@@ -45,7 +43,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie1 {
diff --git a/arch/arm/boot/dts/kirkwood-rs409.dts b/arch/arm/boot/dts/marvell/kirkwood-rs409.dts
index 921ca49e85a4..43673b03cb35 100644
--- a/arch/arm/boot/dts/kirkwood-rs409.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-rs409.dts
@@ -1,10 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Andrew Lunn <andrew@lunn.ch>
  * Ben Peddell <klightspeed@killerwolves.net>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/kirkwood-rs411.dts b/arch/arm/boot/dts/marvell/kirkwood-rs411.dts
index 02852b0c809f..41fa63cec839 100644
--- a/arch/arm/boot/dts/kirkwood-rs411.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-rs411.dts
@@ -1,10 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Andrew Lunn <andrew@lunn.ch>
  * Ben Peddell <klightspeed@killerwolves.net>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-common.dtsi
index 7196c7f3e109..0a698d3b7393 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-common.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * kirkwood-sheevaplug-common.dtsi - Common parts for Sheevaplugs
  *
  * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
- *
- * Licensed under GPLv2
  */
 
 #include "kirkwood.dtsi"
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts
index e2b4ea4f9e10..eb185273376e 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * kirkwood-sheevaplug-esata.dts - Device tree file for eSATA Sheevaplug
  *
  * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
- *
- * Licensed under GPLv2
  */
 
 /dts-v1/;
@@ -34,7 +33,7 @@
 		pinctrl-0 = <&pmx_led_blue>;
 		pinctrl-names = "default";
 
-		health {
+		led-health {
 			label = "sheevaplug:blue:health";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts
index 82f6abf120fd..ce73fcf2255f 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * kirkwood-sheevaplug.dts - Device tree file for Sheevaplug
  *
  * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
- *
- * Licensed under GPLv2
  */
 
 /dts-v1/;
@@ -29,13 +28,13 @@
 		pinctrl-0 = <&pmx_led_blue &pmx_led_red>;
 		pinctrl-names = "default";
 
-		health {
+		led-health {
 			label = "sheevaplug:blue:health";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
 
-		misc {
+		led-misc {
 			label = "sheevaplug:red:misc";
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
index 65e9524e852a..6b7c5218b1fb 100644
--- a/arch/arm/boot/dts/kirkwood-synology.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
@@ -1,12 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Nodes for Marvell 628x Synology devices
  *
  * Andrew Lunn <andrew@lunn.ch>
  * Ben Peddell <klightspeed@killerwolves.net>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 / {
@@ -200,7 +198,7 @@
 		spi@10600 {
 			status = "okay";
 
-			m25p80@0 {
+			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "st,m25p80", "jedec,spi-nor";
@@ -208,32 +206,32 @@
 				spi-max-frequency = <20000000>;
 				mode = <0>;
 
-				partition@00000000 {
+				partition@0 {
 					reg = <0x00000000 0x00080000>;
 					label = "RedBoot";
 				};
 
-				partition@00080000 {
+				partition@80000 {
 					reg = <0x00080000 0x00200000>;
 					label = "zImage";
 				};
 
-				partition@00280000 {
+				partition@280000 {
 					reg = <0x00280000 0x00140000>;
 					label = "rd.gz";
 				};
 
-				partition@003c0000 {
+				partition@3c0000 {
 					reg = <0x003c0000 0x00010000>;
 					label = "vendor";
 				};
 
-				partition@003d0000 {
+				partition@3d0000 {
 					reg = <0x003d0000 0x00020000>;
 					label = "RedBoot config";
 				};
 
-				partition@003f0000 {
+				partition@3f0000 {
 					reg = <0x003f0000 0x00010000>;
 					label = "FIS directory";
 				};
@@ -246,7 +244,7 @@
 
 			rs5c372: rs5c372@32 {
 				status = "disabled";
-				compatible = "ricoh,rs5c372";
+				compatible = "ricoh,rs5c372a";
 				reg = <0x32>;
 			};
 
@@ -288,14 +286,15 @@
 		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
 			 &gpio1 1 GPIO_ACTIVE_HIGH
 			 &gpio1 2 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2200 1
-				       2500 2
-				       3000 4
-				       3300 3
-				       3700 5
-				       3800 6
-				       4200 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2200 1>,
+				<2500 2>,
+				<3000 4>,
+				<3300 3>,
+				<3700 5>,
+				<3800 6>,
+				<4200 7>;
 	};
 
 	gpio-fan-150-15-18 {
@@ -308,14 +307,15 @@
 			 &gpio0 16 GPIO_ACTIVE_HIGH
 			 &gpio0 17 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2200 1
-				       2500 2
-				       3000 4
-				       3300 3
-				       3700 5
-				       3800 6
-				       4200 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2200 1>,
+				<2500 2>,
+				<3000 4>,
+				<3300 3>,
+				<3700 5>,
+				<3800 6>,
+				<4200 7>;
 	};
 
 	gpio-fan-100-32-35 {
@@ -328,14 +328,15 @@
 			 &gpio1 1 GPIO_ACTIVE_HIGH
 			 &gpio1 2 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-fan-100-15-18 {
@@ -348,14 +349,15 @@
 			 &gpio0 16 GPIO_ACTIVE_HIGH
 			 &gpio0 17 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-fan-100-15-35-1 {
@@ -368,14 +370,15 @@
 			 &gpio0 16 GPIO_ACTIVE_HIGH
 			 &gpio0 17 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-fan-100-15-35-3 {
@@ -390,14 +393,15 @@
 		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
 			       &gpio1 12 GPIO_ACTIVE_HIGH
 			       &gpio1 13 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-leds-alarm-12 {
@@ -406,7 +410,7 @@
 		pinctrl-0 = <&pmx_alarmled_12>;
 		pinctrl-names = "default";
 
-		hdd1-green {
+		led-hdd1-green {
 			label = "synology:alarm";
 			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 		};
@@ -420,42 +424,42 @@
 			     &pmx_hddled_26 &pmx_hddled_27>;
 		pinctrl-names = "default";
 
-		hdd1-green {
+		led-hdd1-green {
 			label = "synology:green:hdd1";
 			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd1-amber {
+		led-hdd1-amber {
 			label = "synology:amber:hdd1";
 			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-green {
+		led-hdd2-green {
 			label = "synology:green:hdd2";
 			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-amber {
+		led-hdd2-amber {
 			label = "synology:amber:hdd2";
 			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd3-green {
+		led-hdd3-green {
 			label = "synology:green:hdd3";
 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd3-amber {
+		led-hdd3-amber {
 			label = "synology:amber:hdd3";
 			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd4-green {
+		led-hdd4-green {
 			label = "synology:green:hdd4";
 			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd4-amber {
+		led-hdd4-amber {
 			label = "synology:amber:hdd4";
 			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
 		};
@@ -467,12 +471,12 @@
 		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>;
 		pinctrl-names = "default";
 
-		hdd1-green {
+		led-hdd1-green {
 			label = "synology:green:hdd1";
 			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd1-amber {
+		led-hdd1-amber {
 			label = "synology:amber:hdd1";
 			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
 		};
@@ -484,22 +488,22 @@
 		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>;
 		pinctrl-names = "default";
 
-		hdd1-green {
+		led-hdd1-green {
 			label = "synology:green:hdd1";
 			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd1-amber {
+		led-hdd1-amber {
 			label = "synology:amber:hdd1";
 			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-green {
+		led-hdd2-green {
 			label = "synology:green:hdd2";
 			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-amber {
+		led-hdd2-amber {
 			label = "synology:amber:hdd2";
 			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
 		};
@@ -514,52 +518,52 @@
 			     &pmx_hddled_45>;
 		pinctrl-names = "default";
 
-		hdd1-green {
+		led-hdd1-green {
 			label = "synology:green:hdd1";
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd1-amber {
+		led-hdd1-amber {
 			label = "synology:amber:hdd1";
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-green {
+		led-hdd2-green {
 			label = "synology:green:hdd2";
 			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-amber {
+		led-hdd2-amber {
 			label = "synology:amber:hdd2";
 			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd3-green {
+		led-hdd3-green {
 			label = "synology:green:hdd3";
 			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd3-amber {
+		led-hdd3-amber {
 			label = "synology:amber:hdd3";
 			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd4-green {
+		led-hdd4-green {
 			label = "synology:green:hdd4";
 			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd4-amber {
+		led-hdd4-amber {
 			label = "synology:amber:hdd4";
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd5-green {
+		led-hdd5-green {
 			label = "synology:green:hdd5";
 			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd5-amber {
+		led-hdd5-amber {
 			label = "synology:amber:hdd5";
 			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 		};
@@ -571,22 +575,22 @@
 		pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>;
 		pinctrl-names = "default";
 
-		hdd1-green {
+		led-hdd1-green {
 			label = "synology:green:hdd1";
 			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd1-amber {
+		led-hdd1-amber {
 			label = "synology:amber:hdd1";
 			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-green {
+		led-hdd2-green {
 			label = "synology:green:hdd2";
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-amber {
+		led-hdd2-amber {
 			label = "synology:amber:hdd2";
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 		};
@@ -849,7 +853,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/marvell/kirkwood-t5325.dts
index 3500f4738fb0..a6e77a487d00 100644
--- a/arch/arm/boot/dts/kirkwood-t5325.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-t5325.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree file for HP t5325 Thin Client"
  *
@@ -6,9 +7,6 @@
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  * Andrew Lunn <andrew@lunn.ch>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
 */
 
 /dts-v1/;
@@ -158,12 +156,10 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_power>;
 		pinctrl-names = "default";
 
-		power {
+		button-power {
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
@@ -221,7 +217,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/marvell/kirkwood-topkick.dts
index 330aada6d33f..a5b51e29f63e 100644
--- a/arch/arm/boot/dts/kirkwood-topkick.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-topkick.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "kirkwood.dtsi"
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts
index ee62204e4ecd..a2e0ad4b84d8 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "kirkwood.dtsi"
@@ -34,17 +35,15 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
 		pinctrl-names = "default";
 
-		copy {
+		button-copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts
index 3437bb396844..35be6bce1dba 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "kirkwood.dtsi"
@@ -34,17 +35,15 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
 		pinctrl-names = "default";
 
-		copy {
+		button-copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ts219.dtsi
index 62e5e2d5c348..1939462a5f48 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts219.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 / {
 	model = "QNAP TS219 family";
 	compatible = "qnap,ts219", "marvell,kirkwood";
@@ -44,29 +45,29 @@
 				spi-max-frequency = <20000000>;
 				mode = <0>;
 
-				partition@0000000 {
+				partition@0 {
 					reg = <0x00000000 0x00080000>;
 					label = "U-Boot";
 				};
 
-				partition@00200000 {
+				partition@200000 {
 					reg = <0x00200000 0x00200000>;
 					label = "Kernel";
 				};
 
-				partition@00400000 {
+				partition@400000 {
 					reg = <0x00400000 0x00900000>;
 					label = "RootFS1";
 				};
-				partition@00d00000 {
+				partition@d00000 {
 					reg = <0x00d00000 0x00300000>;
 					label = "RootFS2";
 				};
-				partition@00040000 {
+				partition@40000 {
 					reg = <0x00080000 0x00040000>;
 					label = "U-Boot Config";
 				};
-				partition@000c0000 {
+				partition@c0000 {
 					reg = <0x000c0000 0x00140000>;
 					label = "NAS Config";
 				};
@@ -85,7 +86,7 @@
 	status = "okay";
 
 	ethphy0: ethernet-phy@X {
-                /* overwrite reg property in board file */
+		/* overwrite reg property in board file */
 	};
 };
 
@@ -97,9 +98,17 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
 	status = "okay";
 };
+
+&rtc {
+	/*
+	 * There is a s35390a available on the i2c bus, the internal rtc isn't
+	 * working (probably no crystal assembled).
+	 */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts419-6281.dts b/arch/arm/boot/dts/marvell/kirkwood-ts419-6281.dts
new file mode 100644
index 000000000000..4a42ebcca4f0
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts419-6281.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for QNAP TS41X with 6281 SoC
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-ts219.dtsi"
+#include "kirkwood-ts419.dtsi"
+
+&ethphy0 { reg = <8>; };
+&ethphy1 { reg = <0>; };
diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts419-6282.dts b/arch/arm/boot/dts/marvell/kirkwood-ts419-6282.dts
new file mode 100644
index 000000000000..be772e194c2b
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts419-6282.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for QNAP TS41X with 6282 SoC
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-ts219.dtsi"
+#include "kirkwood-ts419.dtsi"
+
+&ethphy0 { reg = <0>; };
+&ethphy1 { reg = <1>; };
+
+&pciec { status = "okay"; };
+&pcie1 { status = "okay"; };
diff --git a/arch/arm/boot/dts/kirkwood-ts419.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
index 02bd53762705..f136059607b7 100644
--- a/arch/arm/boot/dts/kirkwood-ts419.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Device Tree include file for QNAP TS41X
  *
  * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
  */
 
 / {
@@ -40,17 +36,15 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
 		pinctrl-names = "default";
 
-		copy {
+		button-copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/marvell/kirkwood.dtsi
index 29b8bd7e0d93..8a1338e672b3 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood.dtsi
@@ -1,10 +1,12 @@
-/include/ "skeleton.dtsi"
+// SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "marvell,kirkwood";
 	interrupt-parent = <&intc>;
 
@@ -22,9 +24,9 @@
 	};
 
 	aliases {
-	       gpio0 = &gpio0;
-	       gpio1 = &gpio1;
-	       i2c0 = &i2c0;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		i2c0 = &i2c0;
 	};
 
 	mbus@f1000000 {
@@ -40,7 +42,7 @@
 		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
 		pcie-io-aperture  = <0xf2000000 0x100000>;   /*   1 MiB    I/O space */
 
-		nand: nand@012f {
+		nand: nand@12f {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			cle = <0>;
@@ -56,7 +58,7 @@
 			status = "disabled";
 		};
 
-		crypto_sram: sa-sram@0301 {
+		crypto_sram: sa-sram@301 {
 			compatible = "mmio-sram";
 			reg = <MBUS_ID(0x03, 0x01) 0x0 0x800>;
 			clocks = <&gate_clk 17>;
@@ -226,7 +228,7 @@
 			reg = <0x20128 0x4>;
 		};
 
-		intc: main-interrupt-ctrl@20200 {
+		intc: interrupt-controller@20200 {
 			compatible = "marvell,orion-intc";
 			interrupt-controller;
 			#interrupt-cells = <1>;
@@ -261,7 +263,7 @@
 			status = "okay";
 		};
 
-		usb0: ehci@50000 {
+		usb0: usb@50000 {
 			compatible = "marvell,orion-ehci";
 			reg = <0x50000 0x1000>;
 			interrupts = <19>;
@@ -277,15 +279,15 @@
 			clocks = <&gate_clk 8>;
 
 			xor00 {
-			      interrupts = <5>;
-			      dmacap,memcpy;
-			      dmacap,xor;
+				interrupts = <5>;
+				dmacap,memcpy;
+				dmacap,xor;
 			};
 			xor01 {
-			      interrupts = <6>;
-			      dmacap,memcpy;
-			      dmacap,xor;
-			      dmacap,memset;
+				interrupts = <6>;
+				dmacap,memcpy;
+				dmacap,xor;
+				dmacap,memset;
 			};
 		};
 
@@ -297,15 +299,15 @@
 			clocks = <&gate_clk 16>;
 
 			xor00 {
-			      interrupts = <7>;
-			      dmacap,memcpy;
-			      dmacap,xor;
+				interrupts = <7>;
+				dmacap,memcpy;
+				dmacap,xor;
 			};
 			xor01 {
-			      interrupts = <8>;
-			      dmacap,memcpy;
-			      dmacap,xor;
-			      dmacap,memset;
+				interrupts = <8>;
+				dmacap,memcpy;
+				dmacap,xor;
+				dmacap,memset;
 			};
 		};
 
@@ -367,7 +369,7 @@
 			clocks = <&gate_clk 14>;
 			clock-names = "sata";
 			#phy-cells = <0>;
-			status = "ok";
+			status = "okay";
 		};
 
 		sata_phy1: sata-phy@84000 {
@@ -376,12 +378,12 @@
 			clocks = <&gate_clk 15>;
 			clock-names = "sata";
 			#phy-cells = <0>;
-			status = "ok";
+			status = "okay";
 		};
 
 		audio0: audio-controller@a0000 {
 			compatible = "marvell,kirkwood-audio";
-			#sound-dai-cells = <1>;
+			#sound-dai-cells = <0>;
 			reg = <0xa0000 0x2210>;
 			interrupts = <24>;
 			clocks = <&gate_clk 9>;
diff --git a/arch/arm/boot/dts/marvell/mmp2-brownstone.dts b/arch/arm/boot/dts/marvell/mmp2-brownstone.dts
new file mode 100644
index 000000000000..bc64348b8218
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/mmp2-brownstone.dts
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+/dts-v1/;
+#include "mmp2.dtsi"
+
+/ {
+	model = "Marvell MMP2 Brownstone Development Board";
+	compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2";
+
+	chosen {
+		bootargs = "console=ttyS2,38400 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&twsi1 {
+	status = "okay";
+	pmic: max8925@3c {
+		compatible = "maxim,max8925";
+		reg = <0x3c>;
+		interrupts = <1>;
+		interrupt-parent = <&intcmux4>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		maxim,tsc-irq = <0>;
+
+		regulators {
+			SDV1 {
+				regulator-min-microvolt = <637500>;
+				regulator-max-microvolt = <1425000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			SDV2 {
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2225000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			SDV3 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO1 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO2 {
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO3 {
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO4 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO5 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO6 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO7 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO8 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO9 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO10 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+			};
+			LDO11 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO12 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO13 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO14 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO15 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO16 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO17 {
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO18 {
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO19 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO20 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+		backlight {
+			maxim,max8925-dual-string = <0>;
+		};
+		charger {
+			batt-detect = <0>;
+			topoff-threshold = <1>;
+			fast-charge = <7>;
+			no-temp-support = <0>;
+			no-insert-detect = <0>;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/marvell/mmp2-olpc-xo-1-75.dts
new file mode 100644
index 000000000000..86c425b72fa7
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/mmp2-olpc-xo-1-75.dts
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * OLPC XO 1.75 Laptop.
+ *
+ * Copyright (C) 2018,2019,2020 Lubomir Rintel <lkundrak@v3.sk>
+ */
+
+/dts-v1/;
+#include "mmp2.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/marvell,mmp2-audio.h>
+
+/ {
+	model = "OLPC XO-1.75";
+	compatible = "olpc,xo-1.75", "mrvl,mmp2";
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@1fc00000 {
+			compatible = "simple-framebuffer";
+			reg = <0x1fc00000 (1200 * 900 * 2)>;
+			width = <1200>;
+			height = <900>;
+			stride = <(1200 * 2)>;
+			format = "r5g6b5";
+			clocks = <&soc_clocks MMP2_CLK_DISP0_LCDC>,
+				 <&soc_clocks MMP2_CLK_DISP0>;
+		};
+	};
+
+	memory@0 {
+		available = <0xcf000 0x1ef31000 0x1000 0xbf000>;
+		reg = <0x0 0x20000000>;
+		device_type = "memory";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		lid {
+			label = "Lid";
+			gpios = <&gpio 129 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+		};
+
+		tablet_mode {
+			label = "E-Book Mode";
+			gpios = <&gpio 128 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_TABLET_MODE>;
+			wakeup-source;
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio 109 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio 108 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-gpio,timeout-ms = <1000>;
+		status = "okay";
+
+		camera@21 {
+			compatible = "ovti,ov7670";
+			reg = <0x21>;
+			reset-gpios = <&gpio 102 GPIO_ACTIVE_LOW>;
+			powerdown-gpios = <&gpio 150 GPIO_ACTIVE_LOW>;
+			clocks = <&camera0>;
+			clock-names = "xclk";
+
+			port {
+				ov7670_0: endpoint {
+					hsync-active = <1>;
+					vsync-active = <1>;
+					remote-endpoint = <&camera0_0>;
+				};
+			};
+		};
+	};
+
+	battery {
+		compatible = "olpc,xo1.5-battery", "olpc,xo1-battery";
+	};
+
+	wlan_reg: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio 34 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	wlan_pwrseq: pwrseq0 {
+		compatible = "mmc-pwrseq-sd8787";
+		powerdown-gpios = <&gpio 57 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound-card {
+		compatible = "audio-graph-card";
+		label = "OLPC XO";
+		dais = <&sspa0_dai>;
+		routing = "Headphones", "HPOL",
+			  "Headphones", "HPOR",
+			  "MIC2", "Mic Jack";
+		widgets = "Headphone", "Headphones", "Microphone", "Mic Jack";
+		hp-det-gpios = <&gpio 97 GPIO_ACTIVE_HIGH>;
+		mic-det-gpios = <&gpio 96 GPIO_ACTIVE_HIGH>;
+	};
+
+	soc {
+		axi@d4200000 {
+			ap-sp@d4290000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "olpc,ap-sp";
+				interrupts = <40>;
+				reg = <0xd4290000 0x1000>;
+				data-gpios = <&gpio 72 GPIO_ACTIVE_HIGH>;
+				clk-gpios = <&gpio 71 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+		};
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&usb_phy0 {
+	status = "okay";
+};
+
+&usb_otg0 {
+	status = "okay";
+};
+
+&mmc1 {
+	clock-frequency = <50000000>;
+	no-1-8-v;
+	mrvl,clk-delay-cycles = <31>;
+	broken-cd;
+	status = "okay";
+};
+
+&mmc2 {
+	clock-frequency = <50000000>;
+	no-1-8-v;
+	bus-width = <4>;
+	non-removable;
+	broken-cd;
+	wakeup-source;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	vmmc-supply = <&wlan_reg>;
+	status = "okay";
+};
+
+&mmc3 {
+	clock-frequency = <50000000>;
+	no-1-8-v;
+	bus-width = <8>;
+	non-removable;
+	broken-cd;
+	mrvl,clk-delay-cycles = <31>;
+	status = "okay";
+};
+
+&twsi1 {
+	status = "okay";
+
+	audio-codec@1a {
+		compatible = "realtek,alc5631";
+		reg = <0x1a>;
+		status = "okay";
+
+		port {
+			rt5631_0: endpoint {
+				mclk-fs = <256>;
+				clocks = <&audio_clk MMP2_CLK_AUDIO_SYSCLK>;
+				remote-endpoint = <&sspa0_0>;
+			};
+		};
+	};
+};
+
+&twsi2 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds1338";
+		reg = <0x68>;
+		status = "okay";
+	};
+};
+
+&twsi6 {
+	status = "okay";
+
+	accelerometer@1d {
+		compatible = "st,lis331dlh", "st,lis3lv02d";
+		reg = <0x1d>;
+		status = "okay";
+	};
+};
+
+&ssp3 {
+	#address-cells = <0>;
+	spi-slave;
+	status = "okay";
+	ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>;
+
+	slave {
+		compatible = "olpc,xo1.75-ec";
+		spi-cpha;
+		cmd-gpios = <&gpio 155 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&camera0 {
+	status = "okay";
+
+	port {
+		camera0_0: endpoint {
+			remote-endpoint = <&ov7670_0>;
+		};
+	};
+};
+
+&asram {
+	status = "okay";
+};
+
+&adma0 {
+	status = "okay";
+};
+
+&audio_clk {
+	status = "okay";
+};
+
+&sspa0 {
+	status = "okay";
+	dmas = <&adma0 0>, <&adma0 1>;
+	dma-names = "tx", "rx";
+
+	sspa0_dai: port {
+		sspa0_0: endpoint {
+			remote-endpoint = <&rt5631_0>;
+			frame-master;
+			bitclock-master;
+			dai-format = "i2s";
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/mmp2.dtsi b/arch/arm/boot/dts/marvell/mmp2.dtsi
new file mode 100644
index 000000000000..987d792f67ea
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/mmp2.dtsi
@@ -0,0 +1,516 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+#include <dt-bindings/clock/marvell,mmp2.h>
+#include <dt-bindings/power/marvell,mmp2.h>
+#include <dt-bindings/clock/marvell,mmp2-audio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		i2c0 = &twsi1;
+		i2c1 = &twsi2;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		L2: l2-cache {
+			compatible = "marvell,tauros2-cache";
+			marvell,tauros2-cache-features = <0x3>;
+		};
+
+		axi@d4200000 {	/* AXI */
+			compatible = "mrvl,axi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4200000 0x00200000>;
+			ranges;
+
+			gpu: gpu@d420d000 {
+				compatible = "vivante,gc";
+				reg = <0xd420d000 0x4000>;
+				interrupts = <8>;
+				status = "disabled";
+				clocks = <&soc_clocks MMP2_CLK_GPU_3D>,
+					 <&soc_clocks MMP2_CLK_GPU_BUS>;
+				clock-names = "core", "bus";
+				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_GPU>;
+			};
+
+			intc: interrupt-controller@d4282000 {
+				compatible = "mrvl,mmp2-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0xd4282000 0x1000>;
+				mrvl,intc-nr-irqs = <64>;
+			};
+
+			intcmux4: interrupt-controller@d4282150 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <4>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x150 0x4>, <0x168 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			intcmux5: interrupt-controller@d4282154 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <5>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x154 0x4>, <0x16c 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+				mrvl,clr-mfp-irq = <1>;
+			};
+
+			intcmux9: interrupt-controller@d4282180 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <9>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x180 0x4>, <0x17c 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <3>;
+			};
+
+			intcmux17: interrupt-controller@d4282158 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <17>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x158 0x4>, <0x170 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <5>;
+			};
+
+			intcmux35: interrupt-controller@d428215c {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <35>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x15c 0x4>, <0x174 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <15>;
+			};
+
+			intcmux51: interrupt-controller@d4282160 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <51>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x160 0x4>, <0x178 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			intcmux55: interrupt-controller@d4282188 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <55>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x188 0x4>, <0x184 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			usb_phy0: usb-phy@d4207000 {
+				compatible = "marvell,mmp2-usb-phy";
+				reg = <0xd4207000 0x40>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			usb_otg0: usb-otg@d4208000 {
+				compatible = "marvell,pxau2o-ehci";
+				reg = <0xd4208000 0x200>;
+				interrupts = <44>;
+				clocks = <&soc_clocks MMP2_CLK_USB>;
+				clock-names = "USBCLK";
+				phys = <&usb_phy0>;
+				phy-names = "usb";
+				status = "disabled";
+			};
+
+			mmc1: mmc@d4280000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4280000 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH0>;
+				clock-names = "io";
+				interrupts = <39>;
+				status = "disabled";
+			};
+
+			mmc2: mmc@d4280800 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4280800 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH1>;
+				clock-names = "io";
+				interrupts = <52>;
+				status = "disabled";
+			};
+
+			mmc3: mmc@d4281000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4281000 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH2>;
+				clock-names = "io";
+				interrupts = <53>;
+				status = "disabled";
+			};
+
+			mmc4: mmc@d4281800 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4281800 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH3>;
+				clock-names = "io";
+				interrupts = <54>;
+				status = "disabled";
+			};
+
+			camera0: camera@d420a000 {
+				compatible = "marvell,mmp2-ccic";
+				reg = <0xd420a000 0x800>;
+				interrupts = <42>;
+				clocks = <&soc_clocks MMP2_CLK_CCIC0>;
+				clock-names = "axi";
+				#clock-cells = <0>;
+				clock-output-names = "mclk";
+				status = "disabled";
+			};
+
+			camera1: camera@d420a800 {
+				compatible = "marvell,mmp2-ccic";
+				reg = <0xd420a800 0x800>;
+				interrupts = <30>;
+				clocks = <&soc_clocks MMP2_CLK_CCIC1>;
+				clock-names = "axi";
+				#clock-cells = <0>;
+				clock-output-names = "mclk";
+				status = "disabled";
+			};
+
+			adma0: dma-controller@d42a0800 {
+				compatible = "marvell,adma-1.0";
+				reg = <0xd42a0800 0x100>;
+				interrupts = <48>;
+				#dma-cells = <1>;
+				asram = <&asram>;
+				iram = <&asram>;
+				status = "disabled";
+			};
+
+			adma1: dma-controller@d42a0900 {
+				compatible = "marvell,adma-1.0";
+				reg = <0xd42a0900 0x100>;
+				interrupts = <48>;
+				#dma-cells = <1>;
+				status = "disabled";
+			};
+
+			audio_clk: clocks@d42a0c30 {
+				compatible = "marvell,mmp2-audio-clock";
+				reg = <0xd42a0c30 0x10>;
+				clock-names = "audio", "vctcxo", "i2s0", "i2s1";
+				clocks = <&soc_clocks MMP2_CLK_AUDIO>,
+					 <&soc_clocks MMP2_CLK_VCTCXO>,
+					 <&soc_clocks MMP2_CLK_I2S0>,
+					 <&soc_clocks MMP2_CLK_I2S1>;
+				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>;
+				#clock-cells = <1>;
+				status = "disabled";
+			};
+
+			sspa0: audio-controller@d42a0c00 {
+				compatible = "marvell,mmp-sspa";
+				reg = <0xd42a0c00 0x30>,
+				      <0xd42a0c80 0x30>;
+				interrupts = <2>;
+				clock-names = "audio", "bitclk";
+				clocks = <&soc_clocks MMP2_CLK_AUDIO>,
+					 <&audio_clk MMP2_CLK_AUDIO_SSPA0>;
+				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>;
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			sspa1: audio-controller@d42a0d00 {
+				compatible = "marvell,mmp-sspa";
+				reg = <0xd42a0d00 0x30>,
+				      <0xd42a0d80 0x30>;
+				interrupts = <3>;
+				clock-names = "audio", "bitclk";
+				clocks = <&soc_clocks MMP2_CLK_AUDIO>,
+					 <&audio_clk MMP2_CLK_AUDIO_SSPA1>;
+				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>;
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		apb@d4000000 {	/* APB */
+			compatible = "mrvl,apb-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4000000 0x00200000>;
+			ranges;
+
+			dma-controller@d4000000 {
+				compatible = "marvell,pdma-1.0";
+				reg = <0xd4000000 0x10000>;
+				interrupts = <48>;
+				/* For backwards compatibility: */
+				#dma-channels = <16>;
+				dma-channels = <16>;
+				status = "disabled";
+			};
+
+			timer0: timer@d4014000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4014000 0x100>;
+				interrupts = <13>;
+				clocks = <&soc_clocks MMP2_CLK_TIMER>;
+			};
+
+			uart1: serial@d4030000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4030000 0x1000>;
+				interrupts = <27>;
+				clocks = <&soc_clocks MMP2_CLK_UART0>;
+				resets = <&soc_clocks MMP2_CLK_UART0>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			uart2: serial@d4017000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4017000 0x1000>;
+				interrupts = <28>;
+				clocks = <&soc_clocks MMP2_CLK_UART1>;
+				resets = <&soc_clocks MMP2_CLK_UART1>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			uart3: serial@d4018000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4018000 0x1000>;
+				interrupts = <24>;
+				clocks = <&soc_clocks MMP2_CLK_UART2>;
+				resets = <&soc_clocks MMP2_CLK_UART2>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			uart4: serial@d4016000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4016000 0x1000>;
+				interrupts = <46>;
+				clocks = <&soc_clocks MMP2_CLK_UART3>;
+				resets = <&soc_clocks MMP2_CLK_UART3>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			gpio: gpio@d4019000 {
+				compatible = "marvell,mmp2-gpio";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xd4019000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <49>;
+				interrupt-names = "gpio_mux";
+				clocks = <&soc_clocks MMP2_CLK_GPIO>;
+				resets = <&soc_clocks MMP2_CLK_GPIO>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ranges;
+
+				gcb0: gpio@d4019000 {
+					reg = <0xd4019000 0x4>;
+				};
+
+				gcb1: gpio@d4019004 {
+					reg = <0xd4019004 0x4>;
+				};
+
+				gcb2: gpio@d4019008 {
+					reg = <0xd4019008 0x4>;
+				};
+
+				gcb3: gpio@d4019100 {
+					reg = <0xd4019100 0x4>;
+				};
+
+				gcb4: gpio@d4019104 {
+					reg = <0xd4019104 0x4>;
+				};
+
+				gcb5: gpio@d4019108 {
+					reg = <0xd4019108 0x4>;
+				};
+			};
+
+			twsi1: i2c@d4011000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4011000 0x1000>;
+				interrupts = <7>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI0>;
+				resets = <&soc_clocks MMP2_CLK_TWSI0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi2: i2c@d4031000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4031000 0x1000>;
+				interrupt-parent = <&intcmux17>;
+				interrupts = <0>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI1>;
+				resets = <&soc_clocks MMP2_CLK_TWSI1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			twsi3: i2c@d4032000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4032000 0x1000>;
+				interrupt-parent = <&intcmux17>;
+				interrupts = <1>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI2>;
+				resets = <&soc_clocks MMP2_CLK_TWSI2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			twsi4: i2c@d4033000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4033000 0x1000>;
+				interrupt-parent = <&intcmux17>;
+				interrupts = <2>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI3>;
+				resets = <&soc_clocks MMP2_CLK_TWSI3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+
+			twsi5: i2c@d4033800 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4033800 0x1000>;
+				interrupt-parent = <&intcmux17>;
+				interrupts = <3>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI4>;
+				resets = <&soc_clocks MMP2_CLK_TWSI4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			twsi6: i2c@d4034000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4034000 0x1000>;
+				interrupt-parent = <&intcmux17>;
+				interrupts = <4>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI5>;
+				resets = <&soc_clocks MMP2_CLK_TWSI5>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			rtc: rtc@d4010000 {
+				compatible = "mrvl,mmp-rtc";
+				reg = <0xd4010000 0x1000>;
+				interrupts = <1>, <0>;
+				interrupt-names = "rtc 1Hz", "rtc alarm";
+				interrupt-parent = <&intcmux5>;
+				clocks = <&soc_clocks MMP2_CLK_RTC>;
+				resets = <&soc_clocks MMP2_CLK_RTC>;
+				status = "disabled";
+			};
+
+			ssp1: spi@d4035000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4035000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP0>;
+				interrupts = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssp2: spi@d4036000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4036000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP1>;
+				interrupts = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssp3: spi@d4037000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4037000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP2>;
+				interrupts = <20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssp4: spi@d4039000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4039000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP3>;
+				interrupts = <21>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		asram: sram@e0000000 {
+			compatible = "mmio-sram";
+			reg = <0xe0000000 0x10000>;
+			ranges = <0 0xe0000000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
+		soc_clocks: clocks {
+			compatible = "marvell,mmp2-clock";
+			reg = <0xd4050000 0x2000>,
+			      <0xd4282800 0x400>,
+			      <0xd4015000 0x1000>;
+			reg-names = "mpmu", "apmu", "apbc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/mmp3-dell-ariel.dts b/arch/arm/boot/dts/marvell/mmp3-dell-ariel.dts
new file mode 100644
index 000000000000..fe6df364a9eb
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/mmp3-dell-ariel.dts
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Dell Wyse 3020 a.k.a. "Ariel" a.k.a. Tx0D (T00D, T10D)
+ *
+ * Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk>
+ */
+
+/dts-v1/;
+#include "mmp3.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Dell Ariel";
+	compatible = "dell,wyse-ariel", "marvell,mmp3";
+
+	aliases {
+		serial2 = &uart3;
+	};
+
+	chosen {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		ranges;
+		bootargs = "earlyprintk=ttyS2,115200 console=ttyS2,115200";
+	};
+
+	memory@0 {
+		available = <0x7f700000 0x7ff00000 0x00000000 0x7f600000>;
+		reg = <0x0 0x80000000>;
+		device_type = "memory";
+	};
+
+	ec_input_spi: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		num-chipselects = <0>;
+		sck-gpios = <&gpio 55 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio 57 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&usb_otg0 {
+	status = "okay";
+};
+
+&usb_otg_phy0 {
+	status = "okay";
+};
+
+&hsic0 {
+	status = "okay";
+
+	usb1@1 {
+		compatible = "usb424,2640";
+		reg = <0x01>;
+		#address-cells = <0x01>;
+		#size-cells = <0x00>;
+
+		mass-storage@1 {
+			compatible = "usb424,4040";
+			reg = <0x01>;
+			status = "disabled";
+		};
+	};
+};
+
+&hsic_phy0 {
+	status = "okay";
+	reset-gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
+};
+
+&mmc3 {
+	status = "okay";
+	max-frequency = <50000000>;
+	status = "okay";
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-highspeed;
+};
+
+&twsi1 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds1338";
+		reg = <0x68>;
+		status = "okay";
+	};
+};
+
+&twsi3 {
+	status = "okay";
+};
+
+&twsi4 {
+	status = "okay";
+
+	embedded-controller@58 {
+		compatible = "dell,wyse-ariel-ec", "ene,kb3930";
+		reg = <0x58>;
+		system-power-controller;
+
+		off-gpios = <&gpio 126 GPIO_ACTIVE_HIGH>,
+			    <&gpio 127 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ssp1 {
+	status = "okay";
+	cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+
+	firmware-flash@0 {
+		compatible = "winbond,w25q32", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		m25p,fast-read;
+	};
+};
+
+&ec_input_spi {
+	status = "okay";
+	cs-gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+
+	power-button@0 {
+		reg = <0>;
+		interrupt-parent = <&gpio>;
+		interrupts = <60 IRQ_TYPE_EDGE_RISING>;
+		compatible = "dell,wyse-ariel-ec-input", "ene,kb3930-input";
+		spi-max-frequency = <33000000>;
+	};
+};
+
+&gpu_2d {
+	status = "okay";
+};
+
+&gpu_3d {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/marvell/mmp3.dtsi b/arch/arm/boot/dts/marvell/mmp3.dtsi
new file mode 100644
index 000000000000..a4fb9203ec1f
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/mmp3.dtsi
@@ -0,0 +1,608 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ *  Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk>
+ */
+
+#include <dt-bindings/clock/marvell,mmp2.h>
+#include <dt-bindings/power/marvell,mmp2.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,mmp3-smp";
+
+		cpu@0 {
+			compatible = "marvell,pj4b";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "marvell,pj4b";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <1>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		axi@d4200000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4200000 0x00200000>;
+			ranges;
+
+			interrupt-controller@d4282000 {
+				compatible = "marvell,mmp3-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0xd4282000 0x1000>,
+				      <0xd4284000 0x100>;
+				mrvl,intc-nr-irqs = <64>;
+			};
+
+			pmic_mux: interrupt-controller@d4282150 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x150 0x4>, <0x168 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <4>;
+			};
+
+			rtc_mux: interrupt-controller@d4282154 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x154 0x4>, <0x16c 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			hsi3_mux: interrupt-controller@d42821bc {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x1bc 0x4>, <0x1a4 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <3>;
+			};
+
+			gpu_mux: interrupt-controller@d42821c0 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x1c0 0x4>, <0x1a8 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <3>;
+			};
+
+			twsi_mux: interrupt-controller@d4282158 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x158 0x4>, <0x170 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <5>;
+			};
+
+			hsi2_mux: interrupt-controller@d42821c4 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x1c4 0x4>, <0x1ac 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			dxo_mux: interrupt-controller@d42821c8 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x1c8 0x4>, <0x1b0 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			misc1_mux: interrupt-controller@d428215c {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x15c 0x4>, <0x174 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <31>;
+			};
+
+			ci_mux: interrupt-controller@d42821cc {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x1cc 0x4>, <0x1b4 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			ssp_mux: interrupt-controller@d4282160 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x160 0x4>, <0x178 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			hsi1_mux: interrupt-controller@d4282184 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x184 0x4>, <0x17c 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <4>;
+			};
+
+			misc2_mux: interrupt-controller@d4282188 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x188 0x4>, <0x180 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <20>;
+			};
+
+			hsi0_mux: interrupt-controller@d42821d0 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x1d0 0x4>, <0x1b8 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <5>;
+			};
+
+			usb_otg_phy0: usb-phy@d4207000 {
+				compatible = "marvell,mmp3-usb-phy";
+				reg = <0xd4207000 0x40>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			usb_otg0: usb@d4208000 {
+				compatible = "marvell,pxau2o-ehci";
+				reg = <0xd4208000 0x200>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_USB>;
+				clock-names = "USBCLK";
+				phys = <&usb_otg_phy0>;
+				phy-names = "usb";
+				status = "disabled";
+			};
+
+			hsic_phy0: usb-phy@f0001800 {
+				compatible = "marvell,mmp3-hsic-phy";
+				reg = <0xf0001800 0x40>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			hsic0: usb@f0001000 {
+				compatible = "marvell,pxau2o-ehci";
+				reg = <0xf0001000 0x200>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_USBHSIC0>;
+				clock-names = "USBCLK";
+				phys = <&hsic_phy0>;
+				phy-names = "usb";
+				phy_type = "hsic";
+				#address-cells = <0x01>;
+				#size-cells = <0x00>;
+				status = "disabled";
+			};
+
+			hsic_phy1: usb-phy@f0002800 {
+				compatible = "marvell,mmp3-hsic-phy";
+				reg = <0xf0002800 0x40>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			hsic1: usb@f0002000 {
+				compatible = "marvell,pxau2o-ehci";
+				reg = <0xf0002000 0x200>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_USBHSIC1>;
+				clock-names = "USBCLK";
+				phys = <&hsic_phy1>;
+				phy-names = "usb";
+				phy_type = "hsic";
+				#address-cells = <0x01>;
+				#size-cells = <0x00>;
+				status = "disabled";
+			};
+
+			mmc1: mmc@d4280000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4280000 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH0>;
+				clock-names = "io";
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			mmc2: mmc@d4280800 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4280800 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH1>;
+				clock-names = "io";
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			mmc3: mmc@d4281000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4281000 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH2>;
+				clock-names = "io";
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			mmc4: mmc@d4281800 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4281800 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH3>;
+				clock-names = "io";
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			mmc5: mmc@d4217000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4217000 0x120>;
+				clocks = <&soc_clocks MMP3_CLK_SDH4>;
+				clock-names = "io";
+				interrupt-parent = <&hsi1_mux>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
+			camera0: camera@d420a000 {
+				compatible = "marvell,mmp2-ccic";
+				reg = <0xd420a000 0x800>;
+				interrupts = <1>;
+				interrupt-parent = <&ci_mux>;
+				clocks = <&soc_clocks MMP2_CLK_CCIC0>;
+				clock-names = "axi";
+				power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>;
+				#clock-cells = <0>;
+				clock-output-names = "mclk";
+				status = "disabled";
+			};
+
+			camera1: camera@d420a800 {
+				compatible = "marvell,mmp2-ccic";
+				reg = <0xd420a800 0x800>;
+				interrupts = <2>;
+				interrupt-parent = <&ci_mux>;
+				clocks = <&soc_clocks MMP2_CLK_CCIC1>;
+				clock-names = "axi";
+				power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>;
+				#clock-cells = <0>;
+				clock-output-names = "mclk";
+				status = "disabled";
+			};
+
+			gpu_3d: gpu@d420d000 {
+				compatible = "vivante,gc";
+				reg = <0xd420d000 0x2000>;
+				interrupt-parent = <&gpu_mux>;
+				interrupts = <0>;
+				status = "disabled";
+				clocks = <&soc_clocks MMP3_CLK_GPU_3D>,
+					 <&soc_clocks MMP3_CLK_GPU_BUS>;
+				clock-names = "core", "bus";
+				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_GPU>;
+			};
+
+			gpu_2d: gpu@d420f000 {
+				compatible = "vivante,gc";
+				reg = <0xd420f000 0x2000>;
+				interrupt-parent = <&gpu_mux>;
+				interrupts = <2>;
+				status = "disabled";
+				clocks = <&soc_clocks MMP3_CLK_GPU_2D>,
+					 <&soc_clocks MMP3_CLK_GPU_BUS>;
+				clock-names = "core", "bus";
+				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_GPU>;
+			};
+		};
+
+		apb@d4000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4000000 0x00200000>;
+			ranges;
+
+			timer: timer@d4014000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4014000 0x100>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_TIMER>;
+			};
+
+			uart1: serial@d4030000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4030000 0x1000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_UART0>;
+				resets = <&soc_clocks MMP2_CLK_UART0>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			uart2: serial@d4017000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4017000 0x1000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_UART1>;
+				resets = <&soc_clocks MMP2_CLK_UART1>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			uart3: serial@d4018000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4018000 0x1000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_UART2>;
+				resets = <&soc_clocks MMP2_CLK_UART2>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			uart4: serial@d4016000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4016000 0x1000>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_UART3>;
+				resets = <&soc_clocks MMP2_CLK_UART3>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			gpio: gpio@d4019000 {
+				compatible = "marvell,mmp2-gpio";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xd4019000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "gpio_mux";
+				clocks = <&soc_clocks MMP2_CLK_GPIO>;
+				resets = <&soc_clocks MMP2_CLK_GPIO>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ranges;
+
+				gcb0: gpio@d4019000 {
+					reg = <0xd4019000 0x4>;
+				};
+
+				gcb1: gpio@d4019004 {
+					reg = <0xd4019004 0x4>;
+				};
+
+				gcb2: gpio@d4019008 {
+					reg = <0xd4019008 0x4>;
+				};
+
+				gcb3: gpio@d4019100 {
+					reg = <0xd4019100 0x4>;
+				};
+
+				gcb4: gpio@d4019104 {
+					reg = <0xd4019104 0x4>;
+				};
+
+				gcb5: gpio@d4019108 {
+					reg = <0xd4019108 0x4>;
+				};
+			};
+
+			twsi1: i2c@d4011000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4011000 0x70>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI0>;
+				resets = <&soc_clocks MMP2_CLK_TWSI0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi2: i2c@d4031000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4031000 0x70>;
+				interrupt-parent = <&twsi_mux>;
+				interrupts = <0>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI1>;
+				resets = <&soc_clocks MMP2_CLK_TWSI1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			twsi3: i2c@d4032000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4032000 0x70>;
+				interrupt-parent = <&twsi_mux>;
+				interrupts = <1>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI2>;
+				resets = <&soc_clocks MMP2_CLK_TWSI2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			twsi4: i2c@d4033000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4033000 0x70>;
+				interrupt-parent = <&twsi_mux>;
+				interrupts = <2>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI3>;
+				resets = <&soc_clocks MMP2_CLK_TWSI3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+
+			twsi5: i2c@d4033800 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4033800 0x70>;
+				interrupt-parent = <&twsi_mux>;
+				interrupts = <3>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI4>;
+				resets = <&soc_clocks MMP2_CLK_TWSI4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			twsi6: i2c@d4034000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4034000 0x70>;
+				interrupt-parent = <&twsi_mux>;
+				interrupts = <4>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI5>;
+				resets = <&soc_clocks MMP2_CLK_TWSI5>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			rtc: rtc@d4010000 {
+				compatible = "mrvl,mmp-rtc";
+				reg = <0xd4010000 0x1000>;
+				interrupts = <1>, <0>;
+				interrupt-names = "rtc 1Hz", "rtc alarm";
+				interrupt-parent = <&rtc_mux>;
+				clocks = <&soc_clocks MMP2_CLK_RTC>;
+				resets = <&soc_clocks MMP2_CLK_RTC>;
+				status = "disabled";
+			};
+
+			ssp1: spi@d4035000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4035000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP0>;
+				interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssp2: spi@d4036000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4036000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP1>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssp3: spi@d4037000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4037000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP2>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssp4: spi@d4039000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4039000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP3>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		l2: cache-controller@d0020000 {
+			compatible = "marvell,tauros3-cache", "arm,pl310-cache";
+			reg = <0xd0020000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		soc_clocks: clocks@d4050000 {
+			compatible = "marvell,mmp3-clock";
+			reg = <0xd4050000 0x2000>,
+			      <0xd4282800 0x400>,
+			      <0xd4015000 0x1000>;
+			reg-names = "mpmu", "apmu", "apbc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		snoop-control-unit@e0000000 {
+			compatible = "arm,arm11mp-scu";
+			reg = <0xe0000000 0x100>;
+		};
+
+		gic: interrupt-controller@e0001000 {
+			compatible = "arm,arm11mp-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0xe0001000 0x1000>,
+			      <0xe0000100 0x100>;
+		};
+
+		local-timer@e0000600 {
+			compatible = "arm,arm11mp-twd-timer";
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			reg = <0xe0000600 0x20>;
+		};
+
+		watchdog@e0000620 {
+			compatible = "arm,arm11mp-twd-wdt";
+			reg = <0xe0000620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi b/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi
index e172029a0c4d..a260c42dbda3 100644
--- a/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi
+++ b/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi
@@ -50,10 +50,10 @@
 		pinctrl-names = "default";
 
 		gpio-fan,speed-map =
-			<0		3
-			1500	2
-			3250	1
-			5000	0>;
+			<   0 3>,
+			<1500 2>,
+			<3250 1>,
+			<5000 0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi b/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi
index c2d87ba6190a..055ac754c5fd 100644
--- a/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi
+++ b/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi
@@ -48,8 +48,6 @@
 / {
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_power_switch>;
 		pinctrl-names = "default";
 
diff --git a/arch/arm/boot/dts/orion5x-kuroboxpro.dts b/arch/arm/boot/dts/marvell/orion5x-kuroboxpro.dts
index e28b568e741a..e28b568e741a 100644
--- a/arch/arm/boot/dts/orion5x-kuroboxpro.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-kuroboxpro.dts
diff --git a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts
index c701e8d16bbb..12a4aac2633e 100644
--- a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
@@ -19,12 +16,13 @@
 	compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x";
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x4000000>; /* 64 MB */
 	};
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		linux,stdout-path = &uart0;
+		stdout-path = &uart0;
 	};
 
 	soc {
@@ -37,22 +35,21 @@
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pmx_buttons>;
 		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		front_button {
+
+		button-front {
 			label = "Front Push Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
 		};
 
-		power_rocker_sw_on {
+		switch-power-rocker-sw-on {
 			label = "Power rocker switch (on|auto)";
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <1>; /* D2NET_SWITCH_POWER_ON */
 			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		power_rocker_sw_off {
+		switch-power-rocker-sw-off {
 			label = "Power rocker switch (auto|off)";
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */
diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts
index 89ff404a528c..f81acb9b7223 100644
--- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 
 /*
  * TODO: add Orion USB device port init when kernel.org support is added.
@@ -25,12 +20,13 @@
 	compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x";
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x4000000>; /* 64 MB */
 	};
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		linux,stdout-path = &uart0;
+		stdout-path = &uart0;
 	};
 
 	soc {
@@ -43,9 +39,8 @@
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pmx_power_button>;
 		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button@1 {
+
+		button-1 {
 			label = "Power-on Switch";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
@@ -57,7 +52,7 @@
 		pinctrl-0 = <&pmx_power_led>;
 		pinctrl-names = "default";
 
-		led@1 {
+		led-1 {
 			label = "power:blue";
 			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lschl.dts b/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts
index ee751995c8d0..79fee048c900 100644
--- a/arch/arm/boot/dts/orion5x-linkstation-lschl.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts
@@ -61,7 +61,7 @@
 	};
 
 	gpio_keys {
-		func {
+		func-button {
 			label = "Function Button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
@@ -90,7 +90,7 @@
 			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
 		};
 
-		func {
+		func-led {
 			label = "lschl:func:blue:top";
 			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts b/arch/arm/boot/dts/marvell/orion5x-linkstation-lsgl.dts
index 9f6fedd39170..9f6fedd39170 100644
--- a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-linkstation-lsgl.dts
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/marvell/orion5x-linkstation-lswtgl.dts
index 7f77ce8cc1fc..7f77ce8cc1fc 100644
--- a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-linkstation-lswtgl.dts
diff --git a/arch/arm/boot/dts/orion5x-linkstation.dtsi b/arch/arm/boot/dts/marvell/orion5x-linkstation.dtsi
index e9991c83d7b7..b6c9b85951ea 100644
--- a/arch/arm/boot/dts/orion5x-linkstation.dtsi
+++ b/arch/arm/boot/dts/marvell/orion5x-linkstation.dtsi
@@ -48,7 +48,7 @@
 / {
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		linux,stdout-path = &uart0;
+		stdout-path = &uart0;
 	};
 
 	soc {
@@ -156,7 +156,7 @@
 &i2c {
 	status = "okay";
 
-	rtc {
+	rtc@32 {
 		compatible = "ricoh,rs5c372a";
 		reg = <0x32>;
 	};
diff --git a/arch/arm/boot/dts/orion5x-lswsgl.dts b/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts
index ea966ec03dd0..e0da406c430f 100644
--- a/arch/arm/boot/dts/orion5x-lswsgl.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts
@@ -55,12 +55,13 @@
 	compatible = "buffalo,lswsgl", "marvell,orion5x-88f5182", "marvell,orion5x";
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x8000000>; /* 128 MB */
 	};
 
 	chosen {
 		bootargs = "console=ttyS0,115200 earlyprintk";
-		linux,stdout-path = &uart0;
+		stdout-path = &uart0;
 	};
 
 	soc {
@@ -73,22 +74,21 @@
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pmx_buttons>;
 		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		func {
+
+		key-func {
 			label = "Function Button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		key-power {
 			label = "Power-on Switch";
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <KEY_RESERVED>; /* LSMINI_SW_POWER */
 			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 		};
 
-		autopower {
+		key-autopower {
 			label = "Power-auto Switch";
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <KEY_ESC>; /* LSMINI_SW_AUTOPOWER */
@@ -102,24 +102,24 @@
 			     &pmx_led_power>;
 		pinctrl-names = "default";
 
-		alarm {
+		led-alarm {
 			label = "lswsgl:alarm:red";
-			gpio = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
 		};
 
-		info {
+		led-info {
 			label = "lswsgl:info:amber";
-			gpio = <&gpio0 3 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
 		};
 
-		func {
+		led-func {
 			label = "lswsgl:func:blue:top";
-			gpio = <&gpio0 9 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "lswsgl:power:blue:bottom";
-			gpio = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 	};
diff --git a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts
index ff3484904294..cb1bd24b7ae3 100644
--- a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  * Copyright (C) Sylver Bruneau <sylver.bruneau@googlemail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
@@ -19,12 +16,13 @@
 	compatible = "maxtor,shared-storage-2", "marvell,orion5x-88f5182", "marvell,orion5x";
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x4000000>; /* 64 MB */
 	};
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		linux,stdout-path = &uart0;
+		stdout-path = &uart0;
 	};
 
 	soc {
@@ -37,15 +35,14 @@
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pmx_buttons>;
 		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		power {
+
+		key-power {
 			label = "Power";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
 		};
 
-		reset {
+		key-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/orion5x-mv88f5181.dtsi b/arch/arm/boot/dts/marvell/orion5x-mv88f5181.dtsi
index f667012b26ca..819f9efb7058 100644
--- a/arch/arm/boot/dts/orion5x-mv88f5181.dtsi
+++ b/arch/arm/boot/dts/marvell/orion5x-mv88f5181.dtsi
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
 
 #include "orion5x.dtsi"
 
diff --git a/arch/arm/boot/dts/orion5x-mv88f5182.dtsi b/arch/arm/boot/dts/marvell/orion5x-mv88f5182.dtsi
index d1ed71c60209..86b87fb26dc9 100644
--- a/arch/arm/boot/dts/orion5x-mv88f5182.dtsi
+++ b/arch/arm/boot/dts/marvell/orion5x-mv88f5182.dtsi
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 
 #include "orion5x.dtsi"
 
diff --git a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts
index 9f6ae4e1de06..d63ea15539aa 100644
--- a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
 
 /dts-v1/;
 
@@ -21,6 +16,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x2000000>; /* 32 MB */
 	};
 
@@ -39,7 +35,7 @@
 		pinctrl-0 = <&pmx_reset_button>;
 		pinctrl-names = "default";
 
-		reset {
+		key-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
@@ -141,8 +137,12 @@
 
 			port@3 {
 				reg = <3>;
-				label = "cpu";
 				ethernet = <&ethport>;
+				phy-mode = "rgmii-id";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
 			};
 
 			port@5 {
@@ -212,6 +212,7 @@
 		/* Hardwired to DSA switch */
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
diff --git a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts b/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts
index 6fb052507b36..75ab913b21e5 100644
--- a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 
 /dts-v1/;
 
@@ -16,12 +11,13 @@
 	compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x";
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x4000000>; /* 64 MB */
 	};
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		linux,stdout-path = &uart0;
+		stdout-path = &uart0;
 	};
 
 	soc {
@@ -36,7 +32,7 @@
 		pinctrl-0 = <&pmx_debug_led>;
 		pinctrl-names = "default";
 
-		led@0 {
+		led-0 {
 			label = "rd88f5182:cpu";
 			linux,default-trigger = "heartbeat";
 			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/marvell/orion5x.dtsi
index fbccfbbab223..939259c57e05 100644
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ b/arch/arm/boot/dts/marvell/orion5x.dtsi
@@ -1,16 +1,11 @@
-/*
- * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "skeleton.dtsi"
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Marvell Orion5x SoC";
 	compatible = "marvell,orion5x";
 	interrupt-parent = <&intc>;
@@ -151,7 +146,7 @@
 				status = "okay";
 			};
 
-			ehci0: ehci@50000 {
+			ehci0: usb@50000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x50000 0x1000>;
 				interrupts = <17>;
@@ -223,7 +218,7 @@
 				status = "okay";
 			};
 
-			ehci1: ehci@a0000 {
+			ehci1: usb@a0000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0xa0000 0x1000>;
 				interrupts = <12>;
diff --git a/arch/arm/boot/dts/marvell/pxa168-aspenite.dts b/arch/arm/boot/dts/marvell/pxa168-aspenite.dts
new file mode 100644
index 000000000000..8bade6bf395b
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/pxa168-aspenite.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+/dts-v1/;
+#include "pxa168.dtsi"
+
+/ {
+	model = "Marvell PXA168 Aspenite Development Board";
+	compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+	};
+
+	memory {
+		reg = <0x00000000 0x04000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&twsi1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/marvell/pxa168.dtsi
index b899e25cbb1b..22ed10cb5619 100644
--- a/arch/arm/boot/dts/pxa168.dtsi
+++ b/arch/arm/boot/dts/marvell/pxa168.dtsi
@@ -1,16 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  *  Copyright (C) 2012 Marvell Technology Group Ltd.
  *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/marvell,pxa168.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		serial0 = &uart1;
 		serial1 = &uart2;
@@ -54,29 +53,34 @@
 				compatible = "mrvl,mmp-timer";
 				reg = <0xd4014000 0x100>;
 				interrupts = <13>;
+				clocks = <&soc_clocks PXA168_CLK_TIMER>;
+				resets = <&soc_clocks PXA168_CLK_TIMER>;
 			};
 
-			uart1: uart@d4017000 {
-				compatible = "mrvl,mmp-uart";
+			uart1: serial@d4017000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
 				reg = <0xd4017000 0x1000>;
+				reg-shift = <2>;
 				interrupts = <27>;
 				clocks = <&soc_clocks PXA168_CLK_UART0>;
 				resets = <&soc_clocks PXA168_CLK_UART0>;
 				status = "disabled";
 			};
 
-			uart2: uart@d4018000 {
-				compatible = "mrvl,mmp-uart";
+			uart2: serial@d4018000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
 				reg = <0xd4018000 0x1000>;
+				reg-shift = <2>;
 				interrupts = <28>;
 				clocks = <&soc_clocks PXA168_CLK_UART1>;
 				resets = <&soc_clocks PXA168_CLK_UART1>;
 				status = "disabled";
 			};
 
-			uart3: uart@d4026000 {
-				compatible = "mrvl,mmp-uart";
+			uart3: serial@d4026000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
 				reg = <0xd4026000 0x1000>;
+				reg-shift = <2>;
 				interrupts = <29>;
 				clocks = <&soc_clocks PXA168_CLK_UART2>;
 				resets = <&soc_clocks PXA168_CLK_UART2>;
@@ -95,7 +99,7 @@
 				resets = <&soc_clocks PXA168_CLK_GPIO>;
 				interrupt-names = "gpio_mux";
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 				ranges;
 
 				gcb0: gpio@d4019000 {
@@ -117,6 +121,8 @@
 
 			twsi1: i2c@d4011000 {
 				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xd4011000 0x1000>;
 				interrupts = <7>;
 				clocks = <&soc_clocks PXA168_CLK_TWSI0>;
@@ -127,6 +133,8 @@
 
 			twsi2: i2c@d4025000 {
 				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xd4025000 0x1000>;
 				interrupts = <58>;
 				clocks = <&soc_clocks PXA168_CLK_TWSI1>;
@@ -137,7 +145,7 @@
 			rtc: rtc@d4010000 {
 				compatible = "mrvl,mmp-rtc";
 				reg = <0xd4010000 0x1000>;
-				interrupts = <5 6>;
+				interrupts = <5>, <6>;
 				interrupt-names = "rtc 1Hz", "rtc alarm";
 				clocks = <&soc_clocks PXA168_CLK_RTC>;
 				resets = <&soc_clocks PXA168_CLK_RTC>;
@@ -145,7 +153,7 @@
 			};
 		};
 
-		soc_clocks: clocks{
+		soc_clocks: clocks {
 			compatible = "marvell,pxa168-clock";
 			reg = <0xd4050000 0x1000>,
 			      <0xd4282800 0x400>,
diff --git a/arch/arm/boot/dts/marvell/pxa910-dkb.dts b/arch/arm/boot/dts/marvell/pxa910-dkb.dts
new file mode 100644
index 000000000000..ce76158867c7
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/pxa910-dkb.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+/dts-v1/;
+#include "pxa910.dtsi"
+
+/ {
+	model = "Marvell PXA910 DKB Development Board";
+	compatible = "mrvl,pxa910-dkb", "mrvl,pxa910";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+	};
+
+	memory {
+		reg = <0x00000000 0x10000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&twsi1 {
+	status = "okay";
+
+	pmic: 88pm860x@34 {
+		compatible = "marvell,88pm860x";
+		reg = <0x34>;
+		interrupts = <4>;
+		interrupt-parent = <&intc>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		marvell,88pm860x-irq-read-clr;
+		marvell,88pm860x-slave-addr = <0x11>;
+
+		regulators {
+			BUCK1 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			BUCK2 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			BUCK3 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+			LDO5 {
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO7 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO8 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO9 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO10 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO12 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+			LDO13 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+			LDO14 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+		rtc {
+			marvell,88pm860x-vrtc = <1>;
+		};
+		touch {
+			marvell,88pm860x-gpadc-prebias = <1>;
+			marvell,88pm860x-gpadc-slot-cycle = <1>;
+			marvell,88pm860x-tsi-prebias = <6>;
+			marvell,88pm860x-pen-prebias = <16>;
+			marvell,88pm860x-pen-prechg = <2>;
+			marvell,88pm860x-resistor-X = <300>;
+		};
+		backlights {
+			backlight-0 {
+				marvell,88pm860x-iset = <4>;
+				marvell,88pm860x-pwm = <3>;
+			};
+			backlight-2 {
+			};
+		};
+		leds {
+			led0-red {
+				marvell,88pm860x-iset = <12>;
+			};
+			led0-green {
+				marvell,88pm860x-iset = <12>;
+			};
+			led0-blue {
+				marvell,88pm860x-iset = <12>;
+			};
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/marvell/pxa910.dtsi
index 0868f6729be1..bd64ac1ec66f 100644
--- a/arch/arm/boot/dts/pxa910.dtsi
+++ b/arch/arm/boot/dts/marvell/pxa910.dtsi
@@ -1,16 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  *  Copyright (C) 2012 Marvell Technology Group Ltd.
  *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/marvell,pxa910.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		serial0 = &uart1;
 		serial1 = &uart2;
@@ -68,27 +67,30 @@
 				status = "disabled";
 			};
 
-			uart1: uart@d4017000 {
-				compatible = "mrvl,mmp-uart";
+			uart1: serial@d4017000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
 				reg = <0xd4017000 0x1000>;
+				reg-shift = <2>;
 				interrupts = <27>;
 				clocks = <&soc_clocks PXA910_CLK_UART0>;
 				resets = <&soc_clocks PXA910_CLK_UART0>;
 				status = "disabled";
 			};
 
-			uart2: uart@d4018000 {
-				compatible = "mrvl,mmp-uart";
+			uart2: serial@d4018000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
 				reg = <0xd4018000 0x1000>;
+				reg-shift = <2>;
 				interrupts = <28>;
 				clocks = <&soc_clocks PXA910_CLK_UART1>;
 				resets = <&soc_clocks PXA910_CLK_UART1>;
 				status = "disabled";
 			};
 
-			uart3: uart@d4036000 {
-				compatible = "mrvl,mmp-uart";
+			uart3: serial@d4036000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
 				reg = <0xd4036000 0x1000>;
+				reg-shift = <2>;
 				interrupts = <59>;
 				clocks = <&soc_clocks PXA910_CLK_UART2>;
 				resets = <&soc_clocks PXA910_CLK_UART2>;
@@ -107,7 +109,7 @@
 				clocks = <&soc_clocks PXA910_CLK_GPIO>;
 				resets = <&soc_clocks PXA910_CLK_GPIO>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 				ranges;
 
 				gcb0: gpio@d4019000 {
@@ -153,7 +155,7 @@
 			rtc: rtc@d4010000 {
 				compatible = "mrvl,mmp-rtc";
 				reg = <0xd4010000 0x1000>;
-				interrupts = <5 6>;
+				interrupts = <5>, <6>;
 				interrupt-names = "rtc 1Hz", "rtc alarm";
 				clocks = <&soc_clocks PXA910_CLK_RTC>;
 				resets = <&soc_clocks PXA910_CLK_RTC>;
@@ -161,7 +163,7 @@
 			};
 		};
 
-		soc_clocks: clocks{
+		soc_clocks: clocks {
 			compatible = "marvell,pxa910-clock";
 			reg = <0xd4050000 0x1000>,
 			      <0xd4282800 0x400>,
diff --git a/arch/arm/boot/dts/mediatek/Makefile b/arch/arm/boot/dts/mediatek/Makefile
new file mode 100644
index 000000000000..37c4cded0eae
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/Makefile
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MEDIATEK) += \
+	mt2701-evb.dtb \
+	mt6572-jty-d101.dtb \
+	mt6572-lenovo-a369i.dtb \
+	mt6580-evbp1.dtb \
+	mt6582-alcatel-yarisxl.dtb \
+	mt6582-prestigio-pmt5008-3g.dtb \
+	mt6589-aquaris5.dtb \
+	mt6589-fairphone-fp1.dtb \
+	mt6592-evb.dtb \
+	mt7623a-rfb-emmc.dtb \
+	mt7623a-rfb-nand.dtb \
+	mt7623n-rfb-emmc.dtb \
+	mt7623n-bananapi-bpi-r2.dtb \
+	mt7629-rfb.dtb \
+	mt8127-moose.dtb \
+	mt8135-evbp1.dtb
diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mediatek/mt2701-evb.dts
index f48497354221..e97dc37f716c 100644
--- a/arch/arm/boot/dts/mt2701-evb.dts
+++ b/arch/arm/boot/dts/mediatek/mt2701-evb.dts
@@ -1,18 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2015 MediaTek Inc.
  * Author: Erin Lo <erin.lo@mediatek.com>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "mt2701.dtsi"
 
 / {
@@ -20,6 +14,7 @@
 	compatible = "mediatek,mt2701-evb", "mediatek,mt2701";
 
 	memory {
+		device_type = "memory";
 		reg = <0 0x80000000 0 0x40000000>;
 	};
 
@@ -55,6 +50,27 @@
 
 	bt_sco_codec:bt_sco_codec {
 		compatible = "linux,bt-sco";
+		#sound-dai-cells = <0>;
+	};
+
+	backlight_lcd: backlight_lcd {
+		compatible = "pwm-backlight";
+		pwms = <&bls 0 100000>;
+		brightness-levels = <
+			  0  16  32  48  64  80  96 112
+			128 144 160 176 192 208 224 240
+			255
+		>;
+		default-brightness-level = <9>;
+	};
+
+	usb_vbus: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 45 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 };
 
@@ -62,6 +78,12 @@
 	status = "okay";
 };
 
+&bls {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_bls_gpio>;
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
@@ -111,6 +133,12 @@
 		};
 	};
 
+	pwm_bls_gpio: pwm_bls_gpio {
+		pins_cmd_dat {
+			pinmux = <MT2701_PIN_208_AUD_EXT_CK1__FUNC_DISP_PWM>;
+		};
+	};
+
 	spi_pins_a: spi0@0 {
 		pins_spi {
 			pinmux = <MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS>,
@@ -204,7 +232,7 @@
 				 <MT2701_PIN_238_EXT_SDIO1__FUNC_EXT_SDIO1>,
 				 <MT2701_PIN_237_EXT_SDIO2__FUNC_EXT_SDIO2>,
 				 <MT2701_PIN_236_EXT_SDIO3__FUNC_EXT_SDIO3>;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 			bias-pull-up;
 		};
 	};
@@ -213,3 +241,14 @@
 &uart0 {
 	status = "okay";
 };
+
+&usb2 {
+	status = "okay";
+	usb-role-switch;
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
+		vbus-supply = <&usb_vbus>;
+	};
+};
diff --git a/arch/arm/boot/dts/mt2701-pinfunc.h b/arch/arm/boot/dts/mediatek/mt2701-pinfunc.h
index e24ebc8d928e..136a25a0ae28 100644
--- a/arch/arm/boot/dts/mt2701-pinfunc.h
+++ b/arch/arm/boot/dts/mediatek/mt2701-pinfunc.h
@@ -1,15 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright (c) 2015 MediaTek Inc.
  * Author: Biao Huang <biao.huang@mediatek.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef __DTS_MT2701_PINFUNC_H
diff --git a/arch/arm/boot/dts/mediatek/mt2701.dtsi b/arch/arm/boot/dts/mediatek/mt2701.dtsi
new file mode 100644
index 000000000000..128b87229f3d
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt2701.dtsi
@@ -0,0 +1,756 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Erin.Lo <erin.lo@mediatek.com>
+ *
+ */
+
+#include <dt-bindings/clock/mt2701-clk.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/power/mt2701-power.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/memory/mt2701-larb-port.h>
+#include <dt-bindings/reset/mt2701-resets.h>
+#include "mt2701-pinfunc.h"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	compatible = "mediatek,mt2701";
+	interrupt-parent = <&cirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt81xx-tz-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		trustzone-bootinfo@80002000 {
+			compatible = "mediatek,trustzone-bootinfo";
+			reg = <0 0x80002000 0 0x1000>;
+		};
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+		#clock-cells = <0>;
+	};
+
+	clk26m: oscillator@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	rtc32k: oscillator@1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "rtc32k";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu_thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+
+			thermal-sensors = <&thermal 0>;
+			sustainable-power = <1000>;
+
+			trips {
+				threshold: trip-point@0 {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: trip-point@1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit@0 {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	topckgen: syscon@10000000 {
+		compatible = "mediatek,mt2701-topckgen", "syscon";
+		reg = <0 0x10000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	infracfg: syscon@10001000 {
+		compatible = "mediatek,mt2701-infracfg", "syscon";
+		reg = <0 0x10001000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pericfg: syscon@10003000 {
+		compatible = "mediatek,mt2701-pericfg", "syscon";
+		reg = <0 0x10003000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	syscfg_pctl_a: syscfg@10005000 {
+		compatible = "mediatek,mt2701-pctl-a-syscfg", "syscon";
+		reg = <0 0x10005000 0 0x1000>;
+	};
+
+	scpsys: power-controller@10006000 {
+		compatible = "mediatek,mt2701-scpsys", "syscon";
+		#power-domain-cells = <1>;
+		reg = <0 0x10006000 0 0x1000>;
+		infracfg = <&infracfg>;
+		clocks = <&topckgen CLK_TOP_MM_SEL>,
+			 <&topckgen CLK_TOP_MFG_SEL>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "mm", "mfg", "ethif";
+	};
+
+	watchdog: watchdog@10007000 {
+		compatible = "mediatek,mt2701-wdt",
+			     "mediatek,mt6589-wdt";
+		reg = <0 0x10007000 0 0x100>;
+	};
+
+	timer: timer@10008000 {
+		compatible = "mediatek,mt2701-timer",
+			     "mediatek,mt6577-timer";
+		reg = <0 0x10008000 0 0x80>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc_clk>;
+		clock-names = "system-clk", "rtc-clk";
+	};
+
+	pio: pinctrl@1000b000 {
+		compatible = "mediatek,mt2701-pinctrl";
+		reg = <0 0x1000b000 0 0x1000>;
+		mediatek,pctl-regmap = <&syscfg_pctl_a>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	smi_common: smi@1000c000 {
+		compatible = "mediatek,mt2701-smi-common";
+		reg = <0 0x1000c000 0 0x1000>;
+		clocks = <&infracfg CLK_INFRA_SMI>,
+			 <&mmsys CLK_MM_SMI_COMMON>,
+			 <&infracfg CLK_INFRA_SMI>;
+		clock-names = "apb", "smi", "async";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
+	sysirq: interrupt-controller@10200100 {
+		compatible = "mediatek,mt2701-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10200100 0 0x1c>;
+	};
+
+	cirq: interrupt-controller@10204000 {
+		compatible = "mediatek,mt2701-cirq",
+			     "mediatek,mtk-cirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&sysirq>;
+		reg = <0 0x10204000 0 0x400>;
+		mediatek,ext-irq-range = <32 200>;
+	};
+
+	iommu: mmsys_iommu@10205000 {
+		compatible = "mediatek,mt2701-m4u";
+		reg = <0 0x10205000 0 0x1000>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_M4U>;
+		clock-names = "bclk";
+		mediatek,larbs = <&larb0 &larb1 &larb2>;
+		#iommu-cells = <1>;
+	};
+
+	apmixedsys: syscon@10209000 {
+		compatible = "mediatek,mt2701-apmixedsys", "syscon";
+		reg = <0 0x10209000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	gic: interrupt-controller@10211000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10211000 0 0x1000>,
+		      <0 0x10212000 0 0x2000>,
+		      <0 0x10214000 0 0x2000>,
+		      <0 0x10216000 0 0x2000>;
+	};
+
+	auxadc: adc@11001000 {
+		compatible = "mediatek,mt2701-auxadc";
+		reg = <0 0x11001000 0 0x1000>;
+		clocks = <&pericfg CLK_PERI_AUXADC>;
+		clock-names = "main";
+		#io-channel-cells = <1>;
+		status = "disabled";
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt2701-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11002000 0 0x400>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt2701-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11003000 0 0x400>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt2701-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11004000 0 0x400>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,mt2701-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11005000 0 0x400>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	i2c0: i2c@11007000 {
+		compatible = "mediatek,mt2701-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11007000 0 0x70>,
+		      <0 0x11000200 0 0x80>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@11008000 {
+		compatible = "mediatek,mt2701-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11008000 0 0x70>,
+		      <0 0x11000280 0 0x80>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@11009000 {
+		compatible = "mediatek,mt2701-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11009000 0 0x70>,
+		      <0 0x11000300 0 0x80>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi0: spi@1100a000 {
+		compatible = "mediatek,mt2701-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x1100a000 0 0x100>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI0_SEL>,
+			 <&pericfg CLK_PERI_SPI0>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	thermal: thermal@1100b000 {
+		#thermal-sensor-cells = <0>;
+		compatible = "mediatek,mt2701-thermal";
+		reg = <0 0x1100b000 0 0x1000>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
+		clock-names = "therm", "auxadc";
+		resets = <&pericfg MT2701_PERI_THERM_SW_RST>;
+		reset-names = "therm";
+		mediatek,auxadc = <&auxadc>;
+		mediatek,apmixedsys = <&apmixedsys>;
+	};
+
+	nandc: nand-controller@1100d000 {
+		compatible = "mediatek,mt2701-nfc";
+		reg = <0 0x1100d000 0 0x1000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_NFI>,
+			 <&pericfg CLK_PERI_NFI_PAD>;
+		clock-names = "nfi_clk", "pad_clk";
+		status = "disabled";
+		ecc-engine = <&bch>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	bch: ecc@1100e000 {
+		compatible = "mediatek,mt2701-ecc";
+		reg = <0 0x1100e000 0 0x1000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_NFI_ECC>;
+		clock-names = "nfiecc_clk";
+		status = "disabled";
+	};
+
+	nor_flash: spi@11014000 {
+		compatible = "mediatek,mt2701-nor",
+			     "mediatek,mt8173-nor";
+		reg = <0 0x11014000 0 0xe0>;
+		clocks = <&pericfg CLK_PERI_FLASH>,
+			 <&topckgen CLK_TOP_FLASH_SEL>;
+		clock-names = "spi", "sf";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@11016000 {
+		compatible = "mediatek,mt2701-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x11016000 0 0x100>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI1_SEL>,
+			 <&pericfg CLK_PERI_SPI1>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	spi2: spi@11017000 {
+		compatible = "mediatek,mt2701-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x11017000 0 0x1000>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI2_SEL>,
+			 <&pericfg CLK_PERI_SPI2>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	audsys: clock-controller@11220000 {
+		compatible = "mediatek,mt2701-audsys", "syscon";
+		reg = <0 0x11220000 0 0x2000>;
+		#clock-cells = <1>;
+
+		afe: audio-controller {
+			compatible = "mediatek,mt2701-audio";
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+				      <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "afe", "asys";
+			power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+
+			clocks = <&infracfg CLK_INFRA_AUDIO>,
+				 <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+				 <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+				 <&topckgen CLK_TOP_AUD_48K_TIMING>,
+				 <&topckgen CLK_TOP_AUD_44K_TIMING>,
+				 <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
+				 <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
+				 <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
+				 <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
+				 <&audsys CLK_AUD_I2SO1>,
+				 <&audsys CLK_AUD_I2SO2>,
+				 <&audsys CLK_AUD_I2SO3>,
+				 <&audsys CLK_AUD_I2SO4>,
+				 <&audsys CLK_AUD_I2SIN1>,
+				 <&audsys CLK_AUD_I2SIN2>,
+				 <&audsys CLK_AUD_I2SIN3>,
+				 <&audsys CLK_AUD_I2SIN4>,
+				 <&audsys CLK_AUD_ASRCO1>,
+				 <&audsys CLK_AUD_ASRCO2>,
+				 <&audsys CLK_AUD_ASRCO3>,
+				 <&audsys CLK_AUD_ASRCO4>,
+				 <&audsys CLK_AUD_AFE>,
+				 <&audsys CLK_AUD_AFE_CONN>,
+				 <&audsys CLK_AUD_A1SYS>,
+				 <&audsys CLK_AUD_A2SYS>,
+				 <&audsys CLK_AUD_AFE_MRGIF>;
+
+			clock-names = "infra_sys_audio_clk",
+				      "top_audio_mux1_sel",
+				      "top_audio_mux2_sel",
+				      "top_audio_a1sys_hp",
+				      "top_audio_a2sys_hp",
+				      "i2s0_src_sel",
+				      "i2s1_src_sel",
+				      "i2s2_src_sel",
+				      "i2s3_src_sel",
+				      "i2s0_src_div",
+				      "i2s1_src_div",
+				      "i2s2_src_div",
+				      "i2s3_src_div",
+				      "i2s0_mclk_en",
+				      "i2s1_mclk_en",
+				      "i2s2_mclk_en",
+				      "i2s3_mclk_en",
+				      "i2so0_hop_ck",
+				      "i2so1_hop_ck",
+				      "i2so2_hop_ck",
+				      "i2so3_hop_ck",
+				      "i2si0_hop_ck",
+				      "i2si1_hop_ck",
+				      "i2si2_hop_ck",
+				      "i2si3_hop_ck",
+				      "asrc0_out_ck",
+				      "asrc1_out_ck",
+				      "asrc2_out_ck",
+				      "asrc3_out_ck",
+				      "audio_afe_pd",
+				      "audio_afe_conn_pd",
+				      "audio_a1sys_pd",
+				      "audio_a2sys_pd",
+				      "audio_mrgif_pd";
+
+			assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+					  <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+					  <&topckgen CLK_TOP_AUD_MUX1_DIV>,
+					  <&topckgen CLK_TOP_AUD_MUX2_DIV>;
+			assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>,
+						 <&topckgen CLK_TOP_AUD2PLL_90M>;
+			assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
+		};
+	};
+
+	mmsys: syscon@14000000 {
+		compatible = "mediatek,mt2701-mmsys", "syscon";
+		reg = <0 0x14000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	bls: pwm@1400a000 {
+		compatible = "mediatek,mt2701-disp-pwm";
+		reg = <0 0x1400a000 0 0x1000>;
+		#pwm-cells = <2>;
+		clocks = <&mmsys CLK_MM_MDP_BLS_26M>, <&mmsys CLK_MM_DISP_BLS>;
+		clock-names = "main", "mm";
+		status = "disabled";
+	};
+
+	larb0: larb@14010000 {
+		compatible = "mediatek,mt2701-smi-larb";
+		reg = <0 0x14010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <0>;
+		clocks = <&mmsys CLK_MM_SMI_LARB0>,
+			 <&mmsys CLK_MM_SMI_LARB0>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
+	imgsys: syscon@15000000 {
+		compatible = "mediatek,mt2701-imgsys", "syscon";
+		reg = <0 0x15000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	larb2: larb@15001000 {
+		compatible = "mediatek,mt2701-smi-larb";
+		reg = <0 0x15001000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <2>;
+		clocks = <&imgsys CLK_IMG_SMI_COMM>,
+			 <&imgsys CLK_IMG_SMI_COMM>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+	};
+
+	jpegdec: jpegdec@15004000 {
+		compatible = "mediatek,mt2701-jpgdec";
+		reg = <0 0x15004000 0 0x1000>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
+			  <&imgsys CLK_IMG_JPGDEC>;
+		clock-names = "jpgdec-smi",
+			      "jpgdec";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+	};
+
+	jpegenc: jpegenc@1500a000 {
+		compatible = "mediatek,mt2701-jpgenc",
+			     "mediatek,mtk-jpgenc";
+		reg = <0 0x1500a000 0 0x1000>;
+		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&imgsys CLK_IMG_VENC>;
+		clock-names = "jpgenc";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+		iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
+			 <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
+	};
+
+	vdecsys: syscon@16000000 {
+		compatible = "mediatek,mt2701-vdecsys", "syscon";
+		reg = <0 0x16000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	larb1: larb@16010000 {
+		compatible = "mediatek,mt2701-smi-larb";
+		reg = <0 0x16010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <1>;
+		clocks = <&vdecsys CLK_VDEC_CKGEN>,
+			 <&vdecsys CLK_VDEC_LARB>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
+	};
+
+	hifsys: syscon@1a000000 {
+		compatible = "mediatek,mt2701-hifsys";
+		reg = <0 0x1a000000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	usb0: usb@1a1c0000 {
+		compatible = "mediatek,mt2701-xhci", "mediatek,mtk-xhci";
+		reg = <0 0x1a1c0000 0 0x1000>,
+		      <0 0x1a1c4700 0 0x0100>;
+		reg-names = "mac", "ippc";
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "sys_ck", "ref_ck";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
+		status = "disabled";
+	};
+
+	u3phy0: t-phy@1a1c4000 {
+		compatible = "mediatek,mt2701-tphy",
+			     "mediatek,generic-tphy-v1";
+		reg = <0 0x1a1c4000 0 0x0700>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		u2port0: usb-phy@1a1c4800 {
+			reg = <0 0x1a1c4800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+
+		u3port0: usb-phy@1a1c4900 {
+			reg = <0 0x1a1c4900 0 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	usb1: usb@1a240000 {
+		compatible = "mediatek,mt2701-xhci", "mediatek,mtk-xhci";
+		reg = <0 0x1a240000 0 0x1000>,
+		      <0 0x1a244700 0 0x0100>;
+		reg-names = "mac", "ippc";
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "sys_ck", "ref_ck";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
+		status = "disabled";
+	};
+
+	u3phy1: t-phy@1a244000 {
+		compatible = "mediatek,mt2701-tphy",
+			     "mediatek,generic-tphy-v1";
+		reg = <0 0x1a244000 0 0x0700>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		u2port1: usb-phy@1a244800 {
+			reg = <0 0x1a244800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+
+		u3port1: usb-phy@1a244900 {
+			reg = <0 0x1a244900 0 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	usb2: usb@11200000 {
+		compatible = "mediatek,mt2701-musb",
+			     "mediatek,mtk-musb";
+		reg = <0 0x11200000 0 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "mc";
+		phys = <&u2port2 PHY_TYPE_USB2>;
+		dr_mode = "otg";
+		clocks = <&pericfg CLK_PERI_USB0>,
+			 <&pericfg CLK_PERI_USB0_MCU>,
+			 <&pericfg CLK_PERI_USB_SLV>;
+		clock-names = "main","mcu","univpll";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+		status = "disabled";
+	};
+
+	u2phy0: t-phy@11210000 {
+		compatible = "mediatek,mt2701-tphy",
+			     "mediatek,generic-tphy-v1";
+		reg = <0 0x11210000 0 0x0800>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "okay";
+
+		u2port2: usb-phy@1a1c4800 {
+			reg = <0 0x11210800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	ethsys: syscon@1b000000 {
+		compatible = "mediatek,mt2701-ethsys", "syscon";
+		reg = <0 0x1b000000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	eth: ethernet@1b100000 {
+		compatible = "mediatek,mt2701-eth", "syscon";
+		reg = <0 0x1b100000 0 0x20000>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+			 <&ethsys CLK_ETHSYS_ESW>,
+			 <&ethsys CLK_ETHSYS_GP1>,
+			 <&ethsys CLK_ETHSYS_GP2>,
+			 <&apmixedsys CLK_APMIXED_TRGPLL>;
+		clock-names = "ethif", "esw", "gp1", "gp2", "trgpll";
+		resets = <&ethsys MT2701_ETHSYS_FE_RST>,
+			 <&ethsys MT2701_ETHSYS_GMAC_RST>,
+			 <&ethsys MT2701_ETHSYS_PPE_RST>;
+		reset-names = "fe", "gmac", "ppe";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+		mediatek,ethsys = <&ethsys>;
+		mediatek,pctl = <&syscfg_pctl_a>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	bdpsys: syscon@1c000000 {
+		compatible = "mediatek,mt2701-bdpsys", "syscon";
+		reg = <0 0x1c000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6323.dtsi b/arch/arm/boot/dts/mediatek/mt6323.dtsi
new file mode 100644
index 000000000000..c230c865116d
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6323.dtsi
@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: John Crispin <john@phrozen.org>
+ *	   Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+&pwrap {
+	pmic: mt6323 {
+		compatible = "mediatek,mt6323";
+		interrupt-parent = <&pio>;
+		interrupts = <150 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		mt6323_leds: leds {
+			compatible = "mediatek,mt6323-led";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mt6323regulator: mt6323regulator {
+			compatible = "mediatek,mt6323-regulator";
+
+			mt6323_vproc_reg: buck_vproc {
+				regulator-name = "vproc";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vsys_reg: buck_vsys {
+				regulator-name = "vsys";
+				regulator-min-microvolt = <1400000>;
+				regulator-max-microvolt = <2987500>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vpa_reg: buck_vpa {
+				regulator-name = "vpa";
+				regulator-min-microvolt = < 500000>;
+				regulator-max-microvolt = <3650000>;
+			};
+
+			mt6323_vtcxo_reg: ldo_vtcxo {
+				regulator-name = "vtcxo";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <90>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcn28_reg: ldo_vcn28 {
+				regulator-name = "vcn28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <185>;
+			};
+
+			mt6323_vcn33_bt_reg: ldo_vcn33_bt {
+				regulator-name = "vcn33_bt";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-enable-ramp-delay = <185>;
+			};
+
+			mt6323_vcn33_wifi_reg: ldo_vcn33_wifi {
+				regulator-name = "vcn33_wifi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-enable-ramp-delay = <185>;
+			};
+
+			mt6323_va_reg: ldo_va {
+				regulator-name = "va";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcama_reg: ldo_vcama {
+				regulator-name = "vcama";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vio28_reg: ldo_vio28 {
+				regulator-name = "vio28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vusb_reg: ldo_vusb {
+				regulator-name = "vusb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-boot-on;
+			};
+
+			mt6323_vmc_reg: ldo_vmc {
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+				regulator-boot-on;
+			};
+
+			mt6323_vmch_reg: ldo_vmch {
+				regulator-name = "vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+				regulator-boot-on;
+			};
+
+			mt6323_vemc3v3_reg: ldo_vemc3v3 {
+				regulator-name = "vemc3v3";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+				regulator-boot-on;
+			};
+
+			mt6323_vgp1_reg: ldo_vgp1 {
+				regulator-name = "vgp1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vgp2_reg: ldo_vgp2 {
+				regulator-name = "vgp2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vgp3_reg: ldo_vgp3 {
+				regulator-name = "vgp3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vcn18_reg: ldo_vcn18 {
+				regulator-name = "vcn18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vsim1_reg: ldo_vsim1 {
+				regulator-name = "vsim1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vsim2_reg: ldo_vsim2 {
+				regulator-name = "vsim2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vrtc_reg: ldo_vrtc {
+				regulator-name = "vrtc";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcamaf_reg: ldo_vcamaf {
+				regulator-name = "vcamaf";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vibr_reg: ldo_vibr {
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+			};
+
+			mt6323_vrf18_reg: ldo_vrf18 {
+				regulator-name = "vrf18";
+				regulator-min-microvolt = <1825000>;
+				regulator-max-microvolt = <1825000>;
+				regulator-enable-ramp-delay = <187>;
+			};
+
+			mt6323_vm_reg: ldo_vm {
+				regulator-name = "vm";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vio18_reg: ldo_vio18 {
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcamd_reg: ldo_vcamd {
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vcamio_reg: ldo_vcamio {
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+		};
+
+		mt6323keys: mt6323keys {
+			compatible = "mediatek,mt6323-keys";
+			mediatek,long-press-mode = <1>;
+			power-off-time-sec = <0>;
+
+			power {
+				linux,keycodes = <116>;
+				wakeup-source;
+			};
+
+			home {
+				linux,keycodes = <114>;
+			};
+		};
+
+		codec: mt6397codec {
+			compatible = "mediatek,mt6397-codec";
+		};
+
+		power-controller {
+			compatible = "mediatek,mt6323-pwrc";
+		};
+
+		rtc {
+			compatible = "mediatek,mt6323-rtc";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6572-jty-d101.dts b/arch/arm/boot/dts/mediatek/mt6572-jty-d101.dts
new file mode 100644
index 000000000000..18c3cab6b7a3
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6572-jty-d101.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2025 Max Shevchenko <wctrl@proton.me>
+ */
+
+/dts-v1/;
+#include "mt6572.dtsi"
+
+/ {
+	model = "JTY D101";
+	compatible = "jty,d101", "mediatek,mt6572";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		stdout-path = "serial0:921600n8";
+
+		framebuffer: framebuffer@bf400000 {
+			compatible = "simple-framebuffer";
+			memory-region = <&framebuffer_reserved>;
+			width = <1024>;
+			height = <600>;
+			stride = <(1024 * 2)>;
+			format = "r5g6b5";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		connsys@80000000 {
+			reg = <0x80000000 0x100000>;
+			no-map;
+		};
+
+		modem@be000000 {
+			reg = <0xbe000000 0x1400000>;
+			no-map;
+		};
+
+		framebuffer_reserved: framebuffer@bf400000 {
+			reg = <0xbf400000 0xc00000>;
+			no-map;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6572-lenovo-a369i.dts b/arch/arm/boot/dts/mediatek/mt6572-lenovo-a369i.dts
new file mode 100644
index 000000000000..c2f0c60ea777
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6572-lenovo-a369i.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2025 Max Shevchenko <wctrl@proton.me>
+ */
+
+/dts-v1/;
+#include "mt6572.dtsi"
+
+/ {
+	model = "Lenovo A369i";
+	compatible = "lenovo,a369i", "mediatek,mt6572";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		stdout-path = "serial0:921600n8";
+
+		framebuffer: framebuffer@9fa00000 {
+			compatible = "simple-framebuffer";
+			memory-region = <&framebuffer_reserved>;
+			width = <480>;
+			height = <800>;
+			stride = <(480 * 2)>;
+			format = "r5g6b5";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		connsys@80000000 {
+			reg = <0x80000000 0x100000>;
+			no-map;
+		};
+
+		framebuffer_reserved: framebuffer@9fa00000 {
+			reg = <0x9fa00000 0x600000>;
+			no-map;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6572.dtsi b/arch/arm/boot/dts/mediatek/mt6572.dtsi
new file mode 100644
index 000000000000..ac70f266d698
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6572.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2025 Max Shevchenko <wctrl@proton.me>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt6589-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt6572-wdt", "mediatek,mt6589-wdt";
+			reg = <0x10007000 0x100>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_LOW>;
+			timeout-sec = <15>;
+			#reset-cells = <1>;
+		};
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt6572-timer", "mediatek,mt6577-timer";
+			reg = <0x10008000 0x80>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&system_clk>, <&rtc_clk>;
+			clock-names = "system-clk", "rtc-clk";
+		};
+
+		sysirq: interrupt-controller@10200100 {
+			compatible = "mediatek,mt6572-sysirq", "mediatek,mt6577-sysirq";
+			reg = <0x10200100 0x1c>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+		};
+
+		gic: interrupt-controller@10211000 {
+			compatible = "arm,cortex-a7-gic";
+			reg = <0x10211000 0x1000>,
+			      <0x10212000 0x2000>,
+			      <0x10214000 0x2000>,
+			      <0x10216000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+		};
+
+		uart0: serial@11005000 {
+			compatible = "mediatek,mt6572-uart", "mediatek,mt6577-uart";
+			reg = <0x11005000 0x400>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			clock-names = "baud";
+			status = "disabled";
+		};
+
+		uart1: serial@11006000 {
+			compatible = "mediatek,mt6572-uart", "mediatek,mt6577-uart";
+			reg = <0x11006000 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			clock-names = "baud";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6580-evbp1.dts b/arch/arm/boot/dts/mediatek/mt6580-evbp1.dts
new file mode 100644
index 000000000000..755a0774a8ee
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6580-evbp1.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include "mt6580.dtsi"
+
+/ {
+	model = "MediaTek MT6580 evaluation board";
+	compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt6580.dtsi b/arch/arm/boot/dts/mediatek/mt6580.dtsi
index a349dba5ff79..9e17698c0609 100644
--- a/arch/arm/boot/dts/mt6580.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt6580.dtsi
@@ -1,20 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2015 MediaTek Inc.
  * Author: Mars.C <mars.cheng@mediatek.com>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
 
 / {
 	compatible = "mediatek,mt6580";
diff --git a/arch/arm/boot/dts/mediatek/mt6582-alcatel-yarisxl.dts b/arch/arm/boot/dts/mediatek/mt6582-alcatel-yarisxl.dts
new file mode 100644
index 000000000000..f55d8edad1ac
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6582-alcatel-yarisxl.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2025 Cristian Cozzolino <cristian_ci@protonmail.com>
+ */
+
+/dts-v1/;
+#include "mt6582.dtsi"
+
+/ {
+	model = "Alcatel One Touch Pop C7 (OT-7041D)";
+	compatible = "alcatel,yarisxl", "mediatek,mt6582";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		stdout-path = "serial0:921600n8";
+
+		framebuffer: framebuffer@9fa00000 {
+			compatible = "simple-framebuffer";
+			memory-region = <&framebuffer_reserved>;
+			width = <480>;
+			height = <854>;
+			stride = <(480 * 4)>;
+			format = "r5g6b5";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		connsys@9f900000 {
+			reg = <0x9f900000 0x100000>;
+			no-map;
+		};
+
+		modem@9e000000 {
+			reg = <0x9e000000 0x1800000>;
+			no-map;
+		};
+
+		framebuffer_reserved: framebuffer@9fa00000 {
+			reg = <0x9fa00000 0x600000>;
+			no-map;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6582-prestigio-pmt5008-3g.dts b/arch/arm/boot/dts/mediatek/mt6582-prestigio-pmt5008-3g.dts
new file mode 100644
index 000000000000..b057e037f940
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6582-prestigio-pmt5008-3g.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Maxim Kutnij <gtk3@inbox.ru>
+ */
+
+/dts-v1/;
+#include "mt6582.dtsi"
+
+/ {
+	model = "Prestigio PMT5008 3G";
+	compatible = "prestigio,pmt5008-3g", "mediatek,mt6582";
+
+	aliases {
+		bootargs = "console=ttyS0,921600n8 earlyprintk";
+		serial0 = &uart0;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6582.dtsi b/arch/arm/boot/dts/mediatek/mt6582.dtsi
new file mode 100644
index 000000000000..f941ea44898a
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6582.dtsi
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Maxim Kutnij <gtk3@inbox.ru>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#size-cells = <0>;
+		#address-cells = <1>;
+		enable-method = "mediatek,mt6589-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <13000000>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt6582-wdt", "mediatek,mt6589-wdt";
+			reg = <0x10007000 0x100>;
+		};
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt6582-timer", "mediatek,mt6577-timer";
+			reg = <0x10008000 0x80>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&system_clk>, <&rtc_clk>;
+		};
+
+		sysirq: interrupt-controller@10200100 {
+			compatible = "mediatek,mt6582-sysirq", "mediatek,mt6577-sysirq";
+			reg = <0x10200100 0x1c>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		gic: interrupt-controller@10211000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			reg = <0x10211000 0x1000>,
+			      <0x10212000 0x2000>,
+			      <0x10214000 0x2000>,
+			      <0x10216000 0x2000>;
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt6582-uart", "mediatek,mt6577-uart";
+			reg = <0x11002000 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			clock-names = "baud";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt6582-uart", "mediatek,mt6577-uart";
+			reg = <0x11003000 0x400>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			clock-names = "baud";
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt6582-uart", "mediatek,mt6577-uart";
+			reg = <0x11004000 0x400>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			clock-names = "baud";
+			status = "disabled";
+		};
+
+		uart3: serial@11005000 {
+			compatible = "mediatek,mt6582-uart", "mediatek,mt6577-uart";
+			reg = <0x11005000 0x400>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			clock-names = "baud";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6589-aquaris5.dts b/arch/arm/boot/dts/mediatek/mt6589-aquaris5.dts
new file mode 100644
index 000000000000..1e7079a3b449
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6589-aquaris5.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Matthias Brugger <matthias.bgg@gmail.com>
+ *
+ */
+
+/dts-v1/;
+#include "mt6589.dtsi"
+
+/ {
+	model = "bq Aquaris5";
+	compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589";
+
+	chosen {
+		bootargs = "console=ttyS0,921600n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6589-fairphone-fp1.dts b/arch/arm/boot/dts/mediatek/mt6589-fairphone-fp1.dts
new file mode 100644
index 000000000000..c952347981de
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6589-fairphone-fp1.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+#include "mt6589.dtsi"
+
+/ {
+	model = "Fairphone 1";
+	compatible = "fairphone,fp1", "mediatek,mt6589";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&cpus {
+	/* SMP is not stable on this board, makes the kernel panic */
+	/delete-property/ enable-method;
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mediatek/mt6589.dtsi
index 0d6f60af7640..c6babc8ad2ba 100644
--- a/arch/arm/boot/dts/mt6589.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt6589.dtsi
@@ -1,29 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (c) 2014 MundoReader S.L.
  * Author: Matthias Brugger <matthias.bgg@gmail.com>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+*/
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "mediatek,mt6589";
 	interrupt-parent = <&sysirq>;
 
-	cpus {
+	cpus: cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "mediatek,mt6589-smp";
 
 		cpu@0 {
 			device_type = "cpu";
@@ -139,7 +133,7 @@
 			status = "disabled";
 		};
 
-		wdt: watchdog@010000000 {
+		wdt: watchdog@10000000 {
 			compatible = "mediatek,mt6589-wdt";
 			reg = <0x10000000 0x44>;
 		};
diff --git a/arch/arm/boot/dts/mediatek/mt6592-evb.dts b/arch/arm/boot/dts/mediatek/mt6592-evb.dts
new file mode 100644
index 000000000000..5e00c1cca2d1
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6592-evb.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Howard Chen <ibanezchen@gmail.com>
+ *
+ */
+
+/dts-v1/;
+#include "mt6592.dtsi"
+
+/ {
+	model = "mt6592 evb";
+	compatible = "mediatek,mt6592-evb", "mediatek,mt6592";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/mt6592.dtsi b/arch/arm/boot/dts/mediatek/mt6592.dtsi
index c69201ffff72..3716f8db951c 100644
--- a/arch/arm/boot/dts/mt6592.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt6592.dtsi
@@ -1,22 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2014 MediaTek Inc.
  * Author: Howard Chen <ibanezchen@gmail.com>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "mediatek,mt6592";
 	interrupt-parent = <&sysirq>;
 
diff --git a/arch/arm/boot/dts/mediatek/mt7623.dtsi b/arch/arm/boot/dts/mediatek/mt7623.dtsi
new file mode 100644
index 000000000000..4b1685b93989
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt7623.dtsi
@@ -0,0 +1,1312 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: John Crispin <john@phrozen.org>
+ *	   Sean Wang <sean.wang@mediatek.com>
+ *	   Ryder Lee <ryder.lee@mediatek.com>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt2701-clk.h>
+#include <dt-bindings/pinctrl/mt7623-pinfunc.h>
+#include <dt-bindings/power/mt2701-power.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/reset/mt2701-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "mediatek,mt7623";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-98000000 {
+			opp-hz = /bits/ 64 <98000000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-198000000 {
+			opp-hz = /bits/ 64 <198000000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-398000000 {
+			opp-hz = /bits/ 64 <398000000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-598000000 {
+			opp-hz = /bits/ 64 <598000000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-747500000 {
+			opp-hz = /bits/ 64 <747500000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-1040000000 {
+			opp-hz = /bits/ 64 <1040000000>;
+			opp-microvolt = <1150000>;
+		};
+
+		opp-1196000000 {
+			opp-hz = /bits/ 64 <1196000000>;
+			opp-microvolt = <1200000>;
+		};
+
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1300000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt6589-smp";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			clocks = <&infracfg CLK_INFRA_CPUSEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			clocks = <&infracfg CLK_INFRA_CPUSEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			clocks = <&infracfg CLK_INFRA_CPUSEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+			clocks = <&infracfg CLK_INFRA_CPUSEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			clock-frequency = <1300000000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc32k: oscillator-1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "rtc32k";
+	};
+
+	clk26m: oscillator-0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	thermal-zones {
+			cpu_thermal: cpu-thermal {
+				polling-delay-passive = <1000>;
+				polling-delay = <1000>;
+
+				thermal-sensors = <&thermal 0>;
+
+				trips {
+					cpu_passive: cpu-passive {
+						temperature = <57000>;
+						hysteresis = <2000>;
+						type = "passive";
+					};
+
+					cpu_active: cpu-active {
+						temperature = <67000>;
+						hysteresis = <2000>;
+						type = "active";
+					};
+
+					cpu_hot: cpu-hot {
+						temperature = <87000>;
+						hysteresis = <2000>;
+						type = "hot";
+					};
+
+					cpu-crit {
+						temperature = <107000>;
+						hysteresis = <2000>;
+						type = "critical";
+					};
+				};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_active>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map2 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <13000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	topckgen: syscon@10000000 {
+		compatible = "mediatek,mt7623-topckgen",
+			     "mediatek,mt2701-topckgen",
+			     "syscon";
+		reg = <0 0x10000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	infracfg: syscon@10001000 {
+		compatible = "mediatek,mt7623-infracfg",
+			     "mediatek,mt2701-infracfg",
+			     "syscon";
+		reg = <0 0x10001000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pericfg: syscon@10003000 {
+		compatible = "mediatek,mt7623-pericfg",
+			      "mediatek,mt2701-pericfg",
+			      "syscon";
+		reg = <0 0x10003000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pio: pinctrl@10005000 {
+		compatible = "mediatek,mt7623-pinctrl";
+		reg = <0 0x1000b000 0 0x1000>;
+		mediatek,pctl-regmap = <&syscfg_pctl_a>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	syscfg_pctl_a: syscfg@10005000 {
+		compatible = "mediatek,mt7623-pctl-a-syscfg", "syscon";
+		reg = <0 0x10005000 0 0x1000>;
+	};
+
+	scpsys: power-controller@10006000 {
+		compatible = "mediatek,mt7623-scpsys",
+			     "mediatek,mt2701-scpsys",
+			     "syscon";
+		#power-domain-cells = <1>;
+		reg = <0 0x10006000 0 0x1000>;
+		infracfg = <&infracfg>;
+		clocks = <&topckgen CLK_TOP_MM_SEL>,
+			 <&topckgen CLK_TOP_MFG_SEL>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "mm", "mfg", "ethif";
+	};
+
+	watchdog: watchdog@10007000 {
+		compatible = "mediatek,mt7623-wdt",
+			     "mediatek,mt6589-wdt";
+		reg = <0 0x10007000 0 0x100>;
+	};
+
+	timer: timer@10008000 {
+		compatible = "mediatek,mt7623-timer",
+			     "mediatek,mt6577-timer";
+		reg = <0 0x10008000 0 0x80>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc32k>;
+		clock-names = "system-clk", "rtc-clk";
+	};
+
+	pwrap: pwrap@1000d000 {
+		compatible = "mediatek,mt7623-pwrap",
+			     "mediatek,mt2701-pwrap";
+		reg = <0 0x1000d000 0 0x1000>;
+		reg-names = "pwrap";
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&infracfg MT2701_INFRA_PMIC_WRAP_RST>;
+		reset-names = "pwrap";
+		clocks = <&infracfg CLK_INFRA_PMICSPI>,
+			 <&infracfg CLK_INFRA_PMICWRAP>;
+		clock-names = "spi", "wrap";
+	};
+
+	cir: ir-receiver@10013000 {
+		compatible = "mediatek,mt7623-cir";
+		reg = <0 0x10013000 0 0x1000>;
+		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_IRRX>;
+		clock-names = "clk";
+		status = "disabled";
+	};
+
+	sysirq: interrupt-controller@10200100 {
+		compatible = "mediatek,mt7623-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10200100 0 0x1c>;
+	};
+
+	efuse: efuse@10206000 {
+		compatible = "mediatek,mt7623-efuse",
+			     "mediatek,mt8173-efuse";
+		reg = <0 0x10206000 0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		thermal_calibration_data: calib@424 {
+			reg = <0x424 0xc>;
+		};
+	};
+
+	apmixedsys: syscon@10209000 {
+		compatible = "mediatek,mt7623-apmixedsys",
+			     "mediatek,mt2701-apmixedsys",
+			     "syscon";
+		reg = <0 0x10209000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	rng: rng@1020f000 {
+		compatible = "mediatek,mt7623-rng";
+		reg = <0 0x1020f000 0 0x1000>;
+		clocks = <&infracfg CLK_INFRA_TRNG>;
+		clock-names = "rng";
+	};
+
+	gic: interrupt-controller@10211000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10211000 0 0x1000>,
+		      <0 0x10212000 0 0x2000>,
+		      <0 0x10214000 0 0x2000>,
+		      <0 0x10216000 0 0x2000>;
+	};
+
+	auxadc: adc@11001000 {
+		compatible = "mediatek,mt7623-auxadc",
+			     "mediatek,mt2701-auxadc";
+		reg = <0 0x11001000 0 0x1000>;
+		clocks = <&pericfg CLK_PERI_AUXADC>;
+		clock-names = "main";
+		#io-channel-cells = <1>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt7623-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11002000 0 0x400>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART0_SEL>,
+			 <&pericfg CLK_PERI_UART0>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt7623-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11003000 0 0x400>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART1_SEL>,
+			 <&pericfg CLK_PERI_UART1>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt7623-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11004000 0 0x400>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART2_SEL>,
+			 <&pericfg CLK_PERI_UART2>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,mt7623-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11005000 0 0x400>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART3_SEL>,
+			 <&pericfg CLK_PERI_UART3>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	pwm: pwm@11006000 {
+		compatible = "mediatek,mt7623-pwm";
+		reg = <0 0x11006000 0 0x1000>;
+		#pwm-cells = <2>;
+		clocks = <&topckgen CLK_TOP_PWM_SEL>,
+			 <&pericfg CLK_PERI_PWM>,
+			 <&pericfg CLK_PERI_PWM1>,
+			 <&pericfg CLK_PERI_PWM2>,
+			 <&pericfg CLK_PERI_PWM3>,
+			 <&pericfg CLK_PERI_PWM4>,
+			 <&pericfg CLK_PERI_PWM5>;
+		clock-names = "top", "main", "pwm1", "pwm2",
+			      "pwm3", "pwm4", "pwm5";
+		status = "disabled";
+	};
+
+	i2c0: i2c@11007000 {
+		compatible = "mediatek,mt7623-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11007000 0 0x70>,
+		      <0 0x11000200 0 0x80>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C0>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@11008000 {
+		compatible = "mediatek,mt7623-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11008000 0 0x70>,
+		      <0 0x11000280 0 0x80>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C1>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@11009000 {
+		compatible = "mediatek,mt7623-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11009000 0 0x70>,
+		      <0 0x11000300 0 0x80>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C2>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi0: spi@1100a000 {
+		compatible = "mediatek,mt7623-spi",
+			     "mediatek,mt2701-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x1100a000 0 0x100>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI0_SEL>,
+			 <&pericfg CLK_PERI_SPI0>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	thermal: thermal@1100b000 {
+		#thermal-sensor-cells = <1>;
+		compatible = "mediatek,mt7623-thermal",
+			     "mediatek,mt2701-thermal";
+		reg = <0 0x1100b000 0 0x1000>;
+		interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
+		clock-names = "therm", "auxadc";
+		resets = <&pericfg MT2701_PERI_THERM_SW_RST>;
+		reset-names = "therm";
+		mediatek,auxadc = <&auxadc>;
+		mediatek,apmixedsys = <&apmixedsys>;
+		nvmem-cells = <&thermal_calibration_data>;
+		nvmem-cell-names = "calibration-data";
+	};
+
+	btif: serial@1100c000 {
+		compatible = "mediatek,mt7623-btif",
+			     "mediatek,mtk-btif";
+		reg = <0 0x1100c000 0 0x1000>;
+		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_BTIF>;
+		clock-names = "main";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	nandc: nfi@1100d000 {
+		compatible = "mediatek,mt7623-nfc",
+			     "mediatek,mt2701-nfc";
+		reg = <0 0x1100d000 0 0x1000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+		clocks = <&pericfg CLK_PERI_NFI>,
+			 <&pericfg CLK_PERI_NFI_PAD>;
+		clock-names = "nfi_clk", "pad_clk";
+		status = "disabled";
+		ecc-engine = <&bch>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	bch: ecc@1100e000 {
+		compatible = "mediatek,mt7623-ecc",
+			     "mediatek,mt2701-ecc";
+		reg = <0 0x1100e000 0 0x1000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_NFI_ECC>;
+		clock-names = "nfiecc_clk";
+		status = "disabled";
+	};
+
+	nor_flash: spi@11014000 {
+		compatible = "mediatek,mt7623-nor",
+			     "mediatek,mt8173-nor";
+		reg = <0 0x11014000 0 0x1000>;
+		clocks = <&pericfg CLK_PERI_FLASH>,
+			 <&topckgen CLK_TOP_FLASH_SEL>;
+		clock-names = "spi", "sf";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@11016000 {
+		compatible = "mediatek,mt7623-spi",
+			     "mediatek,mt2701-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x11016000 0 0x100>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI1_SEL>,
+			 <&pericfg CLK_PERI_SPI1>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	spi2: spi@11017000 {
+		compatible = "mediatek,mt7623-spi",
+			     "mediatek,mt2701-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x11017000 0 0x1000>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI2_SEL>,
+			 <&pericfg CLK_PERI_SPI2>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	usb0: usb@11200000 {
+		compatible = "mediatek,mt7623-musb",
+			     "mediatek,mtk-musb";
+		reg = <0 0x11200000 0 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "mc";
+		phys = <&u2port2 PHY_TYPE_USB2>;
+		dr_mode = "otg";
+		clocks = <&pericfg CLK_PERI_USB0>,
+			 <&pericfg CLK_PERI_USB0_MCU>,
+			 <&pericfg CLK_PERI_USB_SLV>;
+		clock-names = "main","mcu","univpll";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+		status = "disabled";
+	};
+
+	u2phy1: t-phy@11210000 {
+		compatible = "mediatek,mt7623-tphy",
+			     "mediatek,generic-tphy-v1";
+		reg = <0 0x11210000 0 0x0800>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		u2port2: usb-phy@11210800 {
+			reg = <0 0x11210800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+		};
+	};
+
+	audsys: clock-controller@11220000 {
+		compatible = "mediatek,mt7623-audsys",
+			     "mediatek,mt2701-audsys",
+			     "syscon";
+		reg = <0 0x11220000 0 0x2000>;
+		#clock-cells = <1>;
+
+		afe: audio-controller {
+			compatible = "mediatek,mt7623-audio",
+				     "mediatek,mt2701-audio";
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+				      <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "afe", "asys";
+			power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+
+			clocks = <&infracfg CLK_INFRA_AUDIO>,
+				 <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+				 <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+				 <&topckgen CLK_TOP_AUD_48K_TIMING>,
+				 <&topckgen CLK_TOP_AUD_44K_TIMING>,
+				 <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
+				 <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
+				 <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
+				 <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
+				 <&audsys CLK_AUD_I2SO1>,
+				 <&audsys CLK_AUD_I2SO2>,
+				 <&audsys CLK_AUD_I2SO3>,
+				 <&audsys CLK_AUD_I2SO4>,
+				 <&audsys CLK_AUD_I2SIN1>,
+				 <&audsys CLK_AUD_I2SIN2>,
+				 <&audsys CLK_AUD_I2SIN3>,
+				 <&audsys CLK_AUD_I2SIN4>,
+				 <&audsys CLK_AUD_ASRCO1>,
+				 <&audsys CLK_AUD_ASRCO2>,
+				 <&audsys CLK_AUD_ASRCO3>,
+				 <&audsys CLK_AUD_ASRCO4>,
+				 <&audsys CLK_AUD_AFE>,
+				 <&audsys CLK_AUD_AFE_CONN>,
+				 <&audsys CLK_AUD_A1SYS>,
+				 <&audsys CLK_AUD_A2SYS>,
+				 <&audsys CLK_AUD_AFE_MRGIF>;
+
+			clock-names = "infra_sys_audio_clk",
+				      "top_audio_mux1_sel",
+				      "top_audio_mux2_sel",
+				      "top_audio_a1sys_hp",
+				      "top_audio_a2sys_hp",
+				      "i2s0_src_sel",
+				      "i2s1_src_sel",
+				      "i2s2_src_sel",
+				      "i2s3_src_sel",
+				      "i2s0_src_div",
+				      "i2s1_src_div",
+				      "i2s2_src_div",
+				      "i2s3_src_div",
+				      "i2s0_mclk_en",
+				      "i2s1_mclk_en",
+				      "i2s2_mclk_en",
+				      "i2s3_mclk_en",
+				      "i2so0_hop_ck",
+				      "i2so1_hop_ck",
+				      "i2so2_hop_ck",
+				      "i2so3_hop_ck",
+				      "i2si0_hop_ck",
+				      "i2si1_hop_ck",
+				      "i2si2_hop_ck",
+				      "i2si3_hop_ck",
+				      "asrc0_out_ck",
+				      "asrc1_out_ck",
+				      "asrc2_out_ck",
+				      "asrc3_out_ck",
+				      "audio_afe_pd",
+				      "audio_afe_conn_pd",
+				      "audio_a1sys_pd",
+				      "audio_a2sys_pd",
+				      "audio_mrgif_pd";
+
+			assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+					  <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+					  <&topckgen CLK_TOP_AUD_MUX1_DIV>,
+					  <&topckgen CLK_TOP_AUD_MUX2_DIV>;
+			assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>,
+						 <&topckgen CLK_TOP_AUD2PLL_90M>;
+			assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
+		};
+	};
+
+	mmc0: mmc@11230000 {
+		compatible = "mediatek,mt7623-mmc",
+			     "mediatek,mt2701-mmc";
+		reg = <0 0x11230000 0 0x1000>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_MSDC30_0>,
+			 <&topckgen CLK_TOP_MSDC30_0_SEL>;
+		clock-names = "source", "hclk";
+		status = "disabled";
+	};
+
+	mmc1: mmc@11240000 {
+		compatible = "mediatek,mt7623-mmc",
+			     "mediatek,mt2701-mmc";
+		reg = <0 0x11240000 0 0x1000>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_MSDC30_1>,
+			 <&topckgen CLK_TOP_MSDC30_1_SEL>;
+		clock-names = "source", "hclk";
+		status = "disabled";
+	};
+
+	vdecsys: syscon@16000000 {
+		compatible = "mediatek,mt7623-vdecsys",
+			     "mediatek,mt2701-vdecsys",
+			     "syscon";
+		reg = <0 0x16000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	hifsys: syscon@1a000000 {
+		compatible = "mediatek,mt7623-hifsys",
+			     "mediatek,mt2701-hifsys";
+		reg = <0 0x1a000000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pcie: pcie@1a140000 {
+		compatible = "mediatek,mt7623-pcie";
+		device_type = "pci";
+		reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */
+		      <0 0x1a142000 0 0x1000>, /* Port0 registers */
+		      <0 0x1a143000 0 0x1000>, /* Port1 registers */
+		      <0 0x1a144000 0 0x1000>; /* Port2 registers */
+		reg-names = "subsys", "port0", "port1", "port2";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0xf800 0 0 0>;
+		interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>,
+				<0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>,
+				<0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+			 <&hifsys CLK_HIFSYS_PCIE0>,
+			 <&hifsys CLK_HIFSYS_PCIE1>,
+			 <&hifsys CLK_HIFSYS_PCIE2>;
+		clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2";
+		resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>,
+			 <&hifsys MT2701_HIFSYS_PCIE1_RST>,
+			 <&hifsys MT2701_HIFSYS_PCIE2_RST>;
+		reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2";
+		phys = <&pcie0_port PHY_TYPE_PCIE>,
+		       <&pcie1_port PHY_TYPE_PCIE>,
+		       <&u3port1 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		bus-range = <0x00 0xff>;
+		status = "disabled";
+		ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000
+			  0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>;
+
+		pcie@0,0 {
+			reg = <0x0000 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+			status = "disabled";
+		};
+
+		pcie@1,0 {
+			reg = <0x0800 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+			status = "disabled";
+		};
+
+		pcie@2,0 {
+			reg = <0x1000 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+			status = "disabled";
+		};
+	};
+
+	pcie0_phy: t-phy@1a149000 {
+		compatible = "mediatek,mt7623-tphy",
+			     "mediatek,generic-tphy-v1";
+		reg = <0 0x1a149000 0 0x0700>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		pcie0_port: pcie-phy@1a149900 {
+			reg = <0 0x1a149900 0 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	pcie1_phy: t-phy@1a14a000 {
+		compatible = "mediatek,mt7623-tphy",
+			     "mediatek,generic-tphy-v1";
+		reg = <0 0x1a14a000 0 0x0700>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		pcie1_port: pcie-phy@1a14a900 {
+			reg = <0 0x1a14a900 0 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	usb1: usb@1a1c0000 {
+		compatible = "mediatek,mt7623-xhci",
+			     "mediatek,mtk-xhci";
+		reg = <0 0x1a1c0000 0 0x1000>,
+		      <0 0x1a1c4700 0 0x0100>;
+		reg-names = "mac", "ippc";
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "sys_ck", "ref_ck";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
+		status = "disabled";
+	};
+
+	u3phy1: t-phy@1a1c4000 {
+		compatible = "mediatek,mt7623-tphy",
+			     "mediatek,generic-tphy-v1";
+		reg = <0 0x1a1c4000 0 0x0700>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		u2port0: usb-phy@1a1c4800 {
+			reg = <0 0x1a1c4800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+
+		u3port0: usb-phy@1a1c4900 {
+			reg = <0 0x1a1c4900 0 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	usb2: usb@1a240000 {
+		compatible = "mediatek,mt7623-xhci",
+			     "mediatek,mtk-xhci";
+		reg = <0 0x1a240000 0 0x1000>,
+		      <0 0x1a244700 0 0x0100>;
+		reg-names = "mac", "ippc";
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "sys_ck", "ref_ck";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
+		status = "disabled";
+	};
+
+	u3phy2: t-phy@1a244000 {
+		compatible = "mediatek,mt7623-tphy",
+			     "mediatek,generic-tphy-v1";
+		reg = <0 0x1a244000 0 0x0700>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		u2port1: usb-phy@1a244800 {
+			reg = <0 0x1a244800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+
+		u3port1: usb-phy@1a244900 {
+			reg = <0 0x1a244900 0 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	ethsys: syscon@1b000000 {
+		compatible = "mediatek,mt7623-ethsys",
+			     "mediatek,mt2701-ethsys",
+			     "syscon";
+		reg = <0 0x1b000000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	hsdma: dma-controller@1b007000 {
+		compatible = "mediatek,mt7623-hsdma";
+		reg = <0 0x1b007000 0 0x1000>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&ethsys CLK_ETHSYS_HSDMA>;
+		clock-names = "hsdma";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+		#dma-cells = <1>;
+	};
+
+	eth: ethernet@1b100000 {
+		compatible = "mediatek,mt7623-eth",
+			     "mediatek,mt2701-eth",
+			     "syscon";
+		reg = <0 0x1b100000 0 0x20000>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+			 <&ethsys CLK_ETHSYS_ESW>,
+			 <&ethsys CLK_ETHSYS_GP1>,
+			 <&ethsys CLK_ETHSYS_GP2>,
+			 <&apmixedsys CLK_APMIXED_TRGPLL>;
+		clock-names = "ethif", "esw", "gp1", "gp2", "trgpll";
+		resets = <&ethsys MT2701_ETHSYS_FE_RST>,
+			 <&ethsys MT2701_ETHSYS_GMAC_RST>,
+			 <&ethsys MT2701_ETHSYS_PPE_RST>;
+		reset-names = "fe", "gmac", "ppe";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+		mediatek,ethsys = <&ethsys>;
+		mediatek,pctl = <&syscfg_pctl_a>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		gmac0: mac@0 {
+			compatible = "mediatek,eth-mac";
+			reg = <0>;
+			status = "disabled";
+		};
+
+		gmac1: mac@1 {
+			compatible = "mediatek,eth-mac";
+			reg = <1>;
+			status = "disabled";
+		};
+	};
+
+	crypto: crypto@1b240000 {
+		compatible = "mediatek,eip97-crypto";
+		reg = <0 0x1b240000 0 0x20000>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&ethsys CLK_ETHSYS_CRYPTO>;
+		clock-names = "cryp";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+		status = "disabled";
+	};
+
+	bdpsys: syscon@1c000000 {
+		compatible = "mediatek,mt7623-bdpsys",
+			     "mediatek,mt2701-bdpsys",
+			     "syscon";
+		reg = <0 0x1c000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+};
+
+&pio {
+	cir_pins_a:cir-default {
+		pins-cir {
+			pinmux = <MT7623_PIN_46_IR_FUNC_IR>;
+			bias-disable;
+		};
+	};
+
+	i2c0_pins_a: i2c0-default {
+		pins-i2c0 {
+			pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
+				 <MT7623_PIN_76_SCL0_FUNC_SCL0>;
+			bias-disable;
+		};
+	};
+
+	i2c1_pins_a: i2c1-default {
+		pin-i2c1 {
+			pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>,
+				 <MT7623_PIN_58_SCL1_FUNC_SCL1>;
+			bias-disable;
+		};
+	};
+
+	i2c1_pins_b: i2c1-alt {
+		pin-i2c1 {
+			pinmux = <MT7623_PIN_242_URTS2_FUNC_SCL1>,
+				 <MT7623_PIN_243_UCTS2_FUNC_SDA1>;
+			bias-disable;
+		};
+	};
+
+	i2c2_pins_a: i2c2-default {
+		pin-i2c2 {
+			pinmux = <MT7623_PIN_77_SDA2_FUNC_SDA2>,
+				 <MT7623_PIN_78_SCL2_FUNC_SCL2>;
+			bias-disable;
+		};
+	};
+
+	i2c2_pins_b: i2c2-alt {
+		pin-i2c2 {
+			pinmux = <MT7623_PIN_122_GPIO122_FUNC_SDA2>,
+				 <MT7623_PIN_123_HTPLG_FUNC_SCL2>;
+			bias-disable;
+		};
+	};
+
+	i2s0_pins_a: i2s0-default {
+		pin-i2s0 {
+			pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>,
+				 <MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>,
+				 <MT7623_PIN_73_I2S0_LRCK_FUNC_I2S0_LRCK>,
+				 <MT7623_PIN_74_I2S0_BCK_FUNC_I2S0_BCK>,
+				 <MT7623_PIN_126_I2S0_MCLK_FUNC_I2S0_MCLK>;
+			drive-strength = <MTK_DRIVE_12mA>;
+			bias-pull-down;
+		};
+	};
+
+	i2s1_pins_a: i2s1-default {
+		pin-i2s1 {
+			pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>,
+				 <MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>,
+				 <MT7623_PIN_35_I2S1_BCK_FUNC_I2S1_BCK>,
+				 <MT7623_PIN_36_I2S1_LRCK_FUNC_I2S1_LRCK>,
+				 <MT7623_PIN_37_I2S1_MCLK_FUNC_I2S1_MCLK>;
+			drive-strength = <MTK_DRIVE_12mA>;
+			bias-pull-down;
+		};
+	};
+
+	key_pins_a: keys-alt {
+		pins-keys {
+			pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
+				 <MT7623_PIN_257_GPIO257_FUNC_GPIO257> ;
+			input-enable;
+		};
+	};
+
+	led_pins_a: leds-alt {
+		pins-leds {
+			pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>,
+				 <MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>,
+				 <MT7623_PIN_241_EXT_SCK_FUNC_GPIO241>;
+		};
+	};
+
+	mmc0_pins_default: mmc0default {
+		pins-cmd-dat {
+			pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
+				 <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
+				 <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
+				 <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
+				 <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
+				 <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
+				 <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
+				 <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
+				 <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-clk {
+			pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
+			bias-pull-down;
+		};
+
+		pins-rst {
+			pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0 {
+		pins-cmd-dat {
+			pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
+				 <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
+				 <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
+				 <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
+				 <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
+				 <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
+				 <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
+				 <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
+				 <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <2>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
+			drive-strength = <2>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-rst {
+			pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_pins_default: mmc1default {
+		pins-cmd-dat {
+			pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
+				 <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
+				 <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
+				 <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
+				 <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-clk {
+			pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
+			bias-pull-down;
+			drive-strength = <4>;
+		};
+
+		pins-wp {
+			pinmux = <MT7623_PIN_29_EINT7_FUNC_MSDC1_WP>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-insert {
+			pinmux = <MT7623_PIN_261_MSDC1_INS_FUNC_GPIO261>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_pins_uhs: mmc1 {
+		pins-cmd-dat {
+			pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
+				 <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
+				 <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
+				 <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
+				 <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-clk {
+			pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
+			drive-strength = <4>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	nand_pins_default: nanddefault {
+		pins-ale {
+			pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-dat {
+			pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>,
+				 <MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>,
+				 <MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>,
+				 <MT7623_PIN_118_MSDC0_DAT3_FUNC_NLD3>,
+				 <MT7623_PIN_121_MSDC0_DAT0_FUNC_NLD0>,
+				 <MT7623_PIN_120_MSDC0_DAT1_FUNC_NLD1>,
+				 <MT7623_PIN_113_MSDC0_DAT5_FUNC_NLD5>,
+				 <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>,
+				 <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		pins-we {
+			pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	pcie_default: pcie_pin_default {
+		pins_cmd_dat {
+			pinmux = <MT7623_PIN_208_AUD_EXT_CK1_FUNC_PCIE0_PERST_N>,
+				 <MT7623_PIN_209_AUD_EXT_CK2_FUNC_PCIE1_PERST_N>;
+			bias-disable;
+		};
+	};
+
+	pwm_pins_a: pwm-default {
+		pins-pwm {
+			pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
+				 <MT7623_PIN_204_PWM1_FUNC_PWM1>,
+				 <MT7623_PIN_205_PWM2_FUNC_PWM2>,
+				 <MT7623_PIN_206_PWM3_FUNC_PWM3>,
+				 <MT7623_PIN_207_PWM4_FUNC_PWM4>;
+		};
+	};
+
+	spi0_pins_a: spi0-default {
+		pins-spi {
+			pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
+				<MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
+				<MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
+				<MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins_a: spi1-default {
+		pins-spi {
+			pinmux = <MT7623_PIN_7_SPI1_CSN_FUNC_SPI1_CS>,
+				<MT7623_PIN_199_SPI1_CK_FUNC_SPI1_CK>,
+				<MT7623_PIN_8_SPI1_MI_FUNC_SPI1_MI>,
+				<MT7623_PIN_9_SPI1_MO_FUNC_SPI1_MO>;
+		};
+	};
+
+	spi2_pins_a: spi2-default {
+		pins-spi {
+			pinmux = <MT7623_PIN_101_SPI2_CSN_FUNC_SPI2_CS>,
+				 <MT7623_PIN_104_SPI2_CK_FUNC_SPI2_CK>,
+				 <MT7623_PIN_102_SPI2_MI_FUNC_SPI2_MI>,
+				 <MT7623_PIN_103_SPI2_MO_FUNC_SPI2_MO>;
+		};
+	};
+
+	uart0_pins_a: uart0-default {
+		pins-dat {
+			pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
+				 <MT7623_PIN_80_UTXD0_FUNC_UTXD0>;
+		};
+	};
+
+	uart1_pins_a: uart1-default {
+		pins-dat {
+			pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
+				 <MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
+		};
+	};
+
+	uart2_pins_a: uart2-default {
+		pins-dat {
+			pinmux = <MT7623_PIN_14_GPIO14_FUNC_URXD2>,
+				 <MT7623_PIN_15_GPIO15_FUNC_UTXD2>;
+		};
+	};
+
+	uart2_pins_b: uart2-alt {
+		pins-dat {
+			pinmux = <MT7623_PIN_200_URXD2_FUNC_URXD2>,
+				 <MT7623_PIN_201_UTXD2_FUNC_UTXD2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mediatek/mt7623a-rfb-emmc.dts b/arch/arm/boot/dts/mediatek/mt7623a-rfb-emmc.dts
new file mode 100644
index 000000000000..5654284bab01
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt7623a-rfb-emmc.dts
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7623a.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+	model = "MediaTek MT7623A with eMMC reference board";
+	compatible = "mediatek,mt7623a-rfb-emmc", "mediatek,mt7623";
+
+	aliases {
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	cpus {
+		cpu@0 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@1 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@2 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@3 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_a>;
+
+		button-factory {
+			label = "factory";
+			linux,code = <BTN_0>;
+			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x20000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "mediatek,mt2701-wm8960-machine";
+		mediatek,platform = <&afe>;
+		audio-routing =
+			"Headphone", "HP_L",
+			"Headphone", "HP_R",
+			"LINPUT1", "AMIC",
+			"RINPUT1", "AMIC";
+		mediatek,audio-codec = <&wm8960>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_pins_a>;
+	};
+};
+
+&btif {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&switch0 {
+	ports {
+		port@0 {
+			status = "okay";
+			label = "lan0";
+		};
+
+		port@1 {
+			status = "okay";
+			label = "lan1";
+		};
+
+		port@2 {
+			status = "okay";
+			label = "lan2";
+		};
+
+		port@3 {
+			status = "okay";
+			label = "lan3";
+		};
+
+		port@4 {
+			status = "okay";
+			label = "wan";
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_b>;
+	status = "okay";
+
+	wm8960: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_b>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	status = "okay";
+	bus-width = <8>;
+	max-frequency = <50000000>;
+	cap-mmc-highspeed;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_default>;
+	status = "okay";
+
+	pcie@0,0 {
+		status = "okay";
+	};
+
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins_a>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_b>;
+	status = "okay";
+};
+
+&usb1 {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt7623a-rfb-nand.dts b/arch/arm/boot/dts/mediatek/mt7623a-rfb-nand.dts
new file mode 100644
index 000000000000..afd177b3b516
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt7623a-rfb-nand.dts
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7623a.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+	model = "MediaTek MT7623A with NAND reference board";
+	compatible = "mediatek,mt7623a-rfb-nand", "mediatek,mt7623";
+
+	aliases {
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	cpus {
+		cpu@0 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@1 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@2 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@3 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_a>;
+
+		button-factory {
+			label = "factory";
+			linux,code = <BTN_0>;
+			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x20000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "mediatek,mt2701-wm8960-machine";
+		mediatek,platform = <&afe>;
+		audio-routing =
+			"Headphone", "HP_L",
+			"Headphone", "HP_R",
+			"LINPUT1", "AMIC",
+			"RINPUT1", "AMIC";
+		mediatek,audio-codec = <&wm8960>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_pins_a>;
+	};
+};
+
+&bch {
+	status = "okay";
+};
+
+&btif {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&switch0 {
+	ports {
+		port@0 {
+			status = "okay";
+			label = "lan0";
+		};
+
+		port@1 {
+			status = "okay";
+			label = "lan1";
+		};
+
+		port@2 {
+			status = "okay";
+			label = "lan2";
+		};
+
+		port@3 {
+			status = "okay";
+			label = "lan3";
+		};
+
+		port@4 {
+			status = "okay";
+			label = "wan";
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_b>;
+	status = "okay";
+
+	wm8960: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_b>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+};
+
+&nandc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins_default>;
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		spare_per_sector = <64>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <12>;
+		nand-ecc-step-size = <1024>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "preloader";
+				reg = <0x0 0x40000>;
+			};
+
+			partition@40000 {
+				label = "uboot";
+				reg = <0x40000 0x80000>;
+			};
+
+			partition@c0000 {
+				label = "uboot-env";
+				reg = <0xC0000 0x40000>;
+			};
+
+			partition@140000 {
+				label = "bootimg";
+				reg = <0x140000 0x2000000>;
+			};
+
+			partition@2140000 {
+				label = "recovery";
+				reg = <0x2140000 0x2000000>;
+			};
+
+			partition@4140000 {
+				label = "rootfs";
+				reg = <0x4140000 0x1000000>;
+			};
+
+			partition@5140000 {
+				label = "usrdata";
+				reg = <0x5140000 0x1000000>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_default>;
+	status = "okay";
+
+	pcie@0,0 {
+		status = "okay";
+	};
+
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins_a>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_b>;
+	status = "okay";
+};
+
+&usb1 {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt7623a.dtsi b/arch/arm/boot/dts/mediatek/mt7623a.dtsi
new file mode 100644
index 000000000000..bcf909d58a1c
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt7623a.dtsi
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/power/mt7623a-power.h>
+#include "mt7623.dtsi"
+
+&afe {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
+};
+
+&crypto {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "trgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
+	};
+};
+
+&eth {
+	status = "okay";
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch0: switch@1f {
+			compatible = "mediatek,mt7530";
+			reg = <0x1f>;
+			mediatek,mcm;
+			resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
+			reset-names = "mcm";
+			core-supply = <&mt6323_vpa_reg>;
+			io-supply = <&mt6323_vemc3v3_reg>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					status = "disabled";
+					reg = <0>;
+					label = "swp0";
+				};
+
+				port@1 {
+					status = "disabled";
+					reg = <1>;
+					label = "swp1";
+				};
+
+				port@2 {
+					status = "disabled";
+					reg = <2>;
+					label = "swp2";
+				};
+
+				port@3 {
+					status = "disabled";
+					reg = <3>;
+					label = "swp3";
+				};
+
+				port@4 {
+					status = "disabled";
+					reg = <4>;
+					label = "swp4";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "cpu";
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "trgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+};
+
+&nandc {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
+};
+
+&pcie {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
+};
+
+&scpsys {
+	compatible = "mediatek,mt7623a-scpsys";
+	clocks = <&topckgen CLK_TOP_ETHIF_SEL>;
+	clock-names = "ethif";
+};
+
+&usb0 {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
+};
+
+&usb1 {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
+};
+
+&usb2 {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
+};
diff --git a/arch/arm/boot/dts/mediatek/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mediatek/mt7623n-bananapi-bpi-r2.dts
new file mode 100644
index 000000000000..a37f3fa223c7
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt7623n-bananapi-bpi-r2.dts
@@ -0,0 +1,471 @@
+/*
+ * Copyright 2017-2018 Sean Wang <sean.wang@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7623n.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+	model = "Bananapi BPI-R2";
+	compatible = "bananapi,bpi-r2", "mediatek,mt7623";
+
+	aliases {
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "d";
+		ddc-i2c-bus = <&hdmiddc0>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi0_out>;
+			};
+		};
+	};
+
+	cpus {
+		cpu@0 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@1 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@2 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@3 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_vgpu: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fixed_vgpu";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_a>;
+
+		button-factory {
+			label = "factory";
+			linux,code = <BTN_0>;
+			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_a>;
+
+		blue {
+			label = "bpi-r2:pio:blue";
+			gpios = <&pio 240 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		green {
+			label = "bpi-r2:pio:green";
+			gpios = <&pio 241 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		red {
+			label = "bpi-r2:pio:red";
+			gpios = <&pio 239 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x80000000>;
+	};
+};
+
+&bls {
+	status = "okay";
+};
+
+&btif {
+	status = "okay";
+};
+
+&cec {
+	status = "okay";
+};
+
+&cir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cir_pins_a>;
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&dpi0 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			dpi0_out: endpoint {
+				remote-endpoint = <&hdmi0_in>;
+			};
+		};
+	};
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "trgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
+	};
+};
+
+&eth {
+	status = "okay";
+
+	mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@1f {
+			compatible = "mediatek,mt7530";
+			reg = <0x1f>;
+			reset-gpios = <&pio 33 0>;
+			core-supply = <&mt6323_vpa_reg>;
+			io-supply = <&mt6323_vemc3v3_reg>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "wan";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan0";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan1";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan2";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "lan3";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "cpu";
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "trgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+};
+
+&hdmi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins_a>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			hdmi0_in: endpoint {
+				remote-endpoint = <&dpi0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmiddc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_ddc_pins_a>;
+	status = "okay";
+};
+
+&hdmi_phy {
+	mediatek,ibias = <0xa>;
+	mediatek,ibias_up = <0x1c>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&mali {
+	mali-supply = <&reg_vgpu>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	status = "okay";
+	bus-width = <8>;
+	max-frequency = <50000000>;
+	cap-mmc-highspeed;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+};
+
+&mt6323keys {
+	home {
+		status = "disabled";
+	};
+};
+
+&mt6323_leds {
+	status = "okay";
+
+	led@0 {
+		reg = <0>;
+		label = "bpi-r2:isink:green";
+		default-state = "off";
+	};
+
+	led@1 {
+		reg = <1>;
+		label = "bpi-r2:isink:red";
+		default-state = "off";
+	};
+
+	led@2 {
+		reg = <2>;
+		label = "bpi-r2:isink:blue";
+		default-state = "off";
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_default>;
+	status = "okay";
+
+	pcie@0,0 {
+		status = "okay";
+	};
+
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
+
+&pio {
+	musb_pins: musb {
+		pins-musb {
+			pinmux = <MT7623_PIN_237_EXT_SDIO2_FUNC_DRV_VBUS>;
+		};
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins_a>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_a>;
+	status = "okay";
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&musb_pins>;
+	status = "okay";
+	usb-role-switch;
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usb1 {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&usb2 {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mediatek/mt7623n-rfb-emmc.dts
new file mode 100644
index 000000000000..34994f3f5a4b
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt7623n-rfb-emmc.dts
@@ -0,0 +1,398 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7623n.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+	model = "MediaTek MT7623N with eMMC reference board";
+	compatible = "mediatek,mt7623n-rfb-emmc", "mediatek,mt7623";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "d";
+		ddc-i2c-bus = <&hdmiddc0>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi0_out>;
+			};
+		};
+	};
+
+	cpus {
+		cpu@0 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@1 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@2 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@3 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_a>;
+
+		button-factory {
+			label = "factory";
+			linux,code = <BTN_0>;
+			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "mediatek,mt2701-wm8960-machine";
+		mediatek,platform = <&afe>;
+		audio-routing =
+			"Headphone", "HP_L",
+			"Headphone", "HP_R",
+			"LINPUT1", "AMIC",
+			"RINPUT1", "AMIC";
+		mediatek,audio-codec = <&wm8960>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_pins_a>;
+	};
+};
+
+&bls {
+	status = "okay";
+};
+
+&btif {
+	status = "okay";
+};
+
+&cec {
+	status = "okay";
+};
+
+&cir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cir_pins_a>;
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&dpi0 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			dpi0_out: endpoint {
+				remote-endpoint = <&hdmi0_in>;
+			};
+		};
+	};
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "trgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy5>;
+};
+
+&eth {
+	status = "okay";
+
+	mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy5: ethernet-phy@5 {
+			reg = <5>;
+			phy-mode = "rgmii-rxid";
+		};
+
+		switch@1f {
+			compatible = "mediatek,mt7530";
+			reg = <0x1f>;
+			reset-gpios = <&pio 33 0>;
+			core-supply = <&mt6323_vpa_reg>;
+			io-supply = <&mt6323_vemc3v3_reg>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan0";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan1";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan3";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "wan";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "trgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+};
+
+&hdmi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins_a>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			hdmi0_in: endpoint {
+				remote-endpoint = <&dpi0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmiddc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_ddc_pins_a>;
+	status = "okay";
+};
+
+&hdmi_phy {
+	mediatek,ibias = <0xa>;
+	mediatek,ibias_up = <0x1c>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_b>;
+	status = "okay";
+
+	wm8960: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	status = "okay";
+	bus-width = <8>;
+	max-frequency = <50000000>;
+	cap-mmc-highspeed;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_default>;
+	status = "okay";
+
+	pcie@0,0 {
+		status = "okay";
+	};
+
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins_a>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_a>;
+	status = "okay";
+};
+
+&usb1 {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt7623n.dtsi b/arch/arm/boot/dts/mediatek/mt7623n.dtsi
new file mode 100644
index 000000000000..3e5cabf19cde
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt7623n.dtsi
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright © 2017-2020 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *	   Ryder Lee <ryder.lee@mediatek.com>
+ *
+ */
+
+#include "mt7623.dtsi"
+#include <dt-bindings/memory/mt2701-larb-port.h>
+
+/ {
+	aliases {
+		rdma0 = &rdma0;
+		rdma1 = &rdma1;
+	};
+
+	g3dsys: syscon@13000000 {
+		compatible = "mediatek,mt7623-g3dsys",
+			     "mediatek,mt2701-g3dsys",
+			     "syscon";
+		reg = <0 0x13000000 0 0x200>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	mali: gpu@13040000 {
+		compatible = "mediatek,mt7623-mali", "arm,mali-450";
+		reg = <0 0x13040000 0 0x30000>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 171 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 172 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 173 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 174 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 177 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 178 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 179 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1",
+				  "ppmmu1", "pp2", "ppmmu2", "pp3", "ppmmu3",
+				  "pp";
+		clocks = <&topckgen CLK_TOP_MMPLL>,
+			 <&g3dsys CLK_G3DSYS_CORE>;
+		clock-names = "bus", "core";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_MFG>;
+		resets = <&g3dsys MT2701_G3DSYS_CORE_RST>;
+	};
+
+	mmsys: syscon@14000000 {
+		compatible = "mediatek,mt7623-mmsys",
+			     "mediatek,mt2701-mmsys",
+			     "syscon";
+		reg = <0 0x14000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	larb0: larb@14010000 {
+		compatible = "mediatek,mt7623-smi-larb",
+			     "mediatek,mt2701-smi-larb";
+		reg = <0 0x14010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <0>;
+		clocks = <&mmsys CLK_MM_SMI_LARB0>,
+			 <&mmsys CLK_MM_SMI_LARB0>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
+	larb1: larb@16010000 {
+		compatible = "mediatek,mt7623-smi-larb",
+			     "mediatek,mt2701-smi-larb";
+		reg = <0 0x16010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <1>;
+		clocks = <&vdecsys CLK_VDEC_CKGEN>,
+			 <&vdecsys CLK_VDEC_LARB>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
+	};
+
+	larb2: larb@15001000 {
+		compatible = "mediatek,mt7623-smi-larb",
+			     "mediatek,mt2701-smi-larb";
+		reg = <0 0x15001000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <2>;
+		clocks = <&imgsys CLK_IMG_SMI_COMM>,
+			 <&imgsys CLK_IMG_SMI_COMM>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+	};
+
+	imgsys: syscon@15000000 {
+		compatible = "mediatek,mt7623-imgsys",
+			     "mediatek,mt2701-imgsys",
+			     "syscon";
+		reg = <0 0x15000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	iommu: mmsys_iommu@10205000 {
+		compatible = "mediatek,mt7623-m4u",
+			     "mediatek,mt2701-m4u";
+		reg = <0 0x10205000 0 0x1000>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_M4U>;
+		clock-names = "bclk";
+		mediatek,larbs = <&larb0 &larb1 &larb2>;
+		#iommu-cells = <1>;
+	};
+
+	jpegdec: jpegdec@15004000 {
+		compatible = "mediatek,mt7623-jpgdec",
+			     "mediatek,mt2701-jpgdec";
+		reg = <0 0x15004000 0 0x1000>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
+			 <&imgsys CLK_IMG_JPGDEC>;
+		clock-names = "jpgdec-smi",
+			      "jpgdec";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+	};
+
+	smi_common: smi@1000c000 {
+		compatible = "mediatek,mt7623-smi-common",
+			     "mediatek,mt2701-smi-common";
+		reg = <0 0x1000c000 0 0x1000>;
+		clocks = <&infracfg CLK_INFRA_SMI>,
+			 <&mmsys CLK_MM_SMI_COMMON>,
+			 <&infracfg CLK_INFRA_SMI>;
+		clock-names = "apb", "smi", "async";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
+	ovl: ovl@14007000 {
+		compatible = "mediatek,mt7623-disp-ovl",
+			     "mediatek,mt2701-disp-ovl";
+		reg = <0 0x14007000 0 0x1000>;
+		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_OVL>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
+	};
+
+	rdma0: rdma@14008000 {
+		compatible = "mediatek,mt7623-disp-rdma",
+			     "mediatek,mt2701-disp-rdma";
+		reg = <0 0x14008000 0 0x1000>;
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_RDMA>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
+	};
+
+	wdma@14009000 {
+		compatible = "mediatek,mt7623-disp-wdma",
+			     "mediatek,mt2701-disp-wdma";
+		reg = <0 0x14009000 0 0x1000>;
+		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_WDMA>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
+	};
+
+	bls: pwm@1400a000 {
+		compatible = "mediatek,mt7623-disp-pwm",
+			     "mediatek,mt2701-disp-pwm";
+		reg = <0 0x1400a000 0 0x1000>;
+		#pwm-cells = <2>;
+		clocks = <&mmsys CLK_MM_MDP_BLS_26M>,
+			 <&mmsys CLK_MM_DISP_BLS>;
+		clock-names = "main", "mm";
+		status = "disabled";
+	};
+
+	color: color@1400b000 {
+		compatible = "mediatek,mt7623-disp-color",
+			     "mediatek,mt2701-disp-color";
+		reg = <0 0x1400b000 0 0x1000>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_COLOR>;
+	};
+
+	dsi: dsi@1400c000 {
+		compatible = "mediatek,mt7623-dsi",
+			     "mediatek,mt2701-dsi";
+		reg = <0 0x1400c000 0 0x1000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DSI_ENGINE>,
+			 <&mmsys CLK_MM_DSI_DIG>,
+			 <&mipi_tx0>;
+		clock-names = "engine", "digital", "hs";
+		phys = <&mipi_tx0>;
+		phy-names = "dphy";
+		status = "disabled";
+	};
+
+	mutex: mutex@1400e000 {
+		compatible = "mediatek,mt7623-disp-mutex",
+			     "mediatek,mt2701-disp-mutex";
+		reg = <0 0x1400e000 0 0x1000>;
+		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_MUTEX_32K>;
+	};
+
+	rdma1: rdma@14012000 {
+		compatible = "mediatek,mt7623-disp-rdma",
+			     "mediatek,mt2701-disp-rdma";
+		reg = <0 0x14012000 0 0x1000>;
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
+	};
+
+	dpi0: dpi@14014000 {
+		compatible = "mediatek,mt7623-dpi",
+			     "mediatek,mt2701-dpi";
+		reg = <0 0x14014000 0 0x1000>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DPI1_DIGL>,
+			 <&mmsys CLK_MM_DPI1_ENGINE>,
+			 <&apmixedsys CLK_APMIXED_TVDPLL>;
+		clock-names = "pixel", "engine", "pll";
+		status = "disabled";
+	};
+
+	hdmi0: hdmi@14015000 {
+		compatible = "mediatek,mt7623-hdmi",
+			     "mediatek,mt2701-hdmi";
+		reg = <0 0x14015000 0 0x400>;
+		clocks = <&mmsys CLK_MM_HDMI_PIXEL>,
+			 <&mmsys CLK_MM_HDMI_PLL>,
+			 <&mmsys CLK_MM_HDMI_AUDIO>,
+			 <&mmsys CLK_MM_HDMI_SPDIF>;
+		clock-names = "pixel", "pll", "bclk", "spdif";
+		phys = <&hdmi_phy>;
+		phy-names = "hdmi";
+		mediatek,syscon-hdmi = <&mmsys 0x900>;
+		cec = <&cec>;
+		status = "disabled";
+	};
+
+	mipi_tx0: dsi-phy@10010000 {
+		compatible = "mediatek,mt7623-mipi-tx",
+			     "mediatek,mt2701-mipi-tx";
+		reg = <0 0x10010000 0 0x90>;
+		clocks = <&clk26m>;
+		clock-output-names = "mipi_tx0_pll";
+		#clock-cells = <0>;
+		#phy-cells = <0>;
+	};
+
+	cec: cec@10012000 {
+		compatible = "mediatek,mt7623-cec",
+			     "mediatek,mt8173-cec";
+		reg = <0 0x10012000 0 0xbc>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_CEC>;
+		status = "disabled";
+	};
+
+	hdmi_phy: hdmi-phy@10209100 {
+		compatible = "mediatek,mt7623-hdmi-phy",
+			     "mediatek,mt2701-hdmi-phy";
+		reg = <0 0x10209100 0 0x24>;
+		clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
+		clock-names = "pll_ref";
+		clock-output-names = "hdmitx_dig_cts";
+		#clock-cells = <0>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+
+	hdmiddc0: i2c@11013000 {
+		compatible = "mediatek,mt7623-hdmi-ddc",
+			     "mediatek,mt8173-hdmi-ddc";
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0 0x11013000 0 0x1C>;
+		clocks = <&pericfg CLK_PERI_I2C3>;
+		clock-names = "ddc-i2c";
+		status = "disabled";
+	};
+};
+
+&pio {
+	hdmi_pins_a: hdmi-default {
+		pins-hdmi {
+			pinmux = <MT7623_PIN_123_HTPLG_FUNC_HTPLG>;
+			input-enable;
+			bias-pull-down;
+		};
+	};
+
+	hdmi_ddc_pins_a: hdmi_ddc-default {
+		pins-hdmi-ddc {
+			pinmux = <MT7623_PIN_124_GPIO124_FUNC_HDMISCK>,
+				 <MT7623_PIN_125_GPIO125_FUNC_HDMISD>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mediatek/mt7629-rfb.dts b/arch/arm/boot/dts/mediatek/mt7629-rfb.dts
new file mode 100644
index 000000000000..f24ebc20732a
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt7629-rfb.dts
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7629.dtsi"
+
+/ {
+	model = "MediaTek MT7629 reference board";
+	compatible = "mediatek,mt7629-rfb", "mediatek,mt7629";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			label = "factory";
+			linux,code = <KEY_RESTART>;
+			gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 58 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x10000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&eth {
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-1 = <&ephy_leds_pins>;
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "gmii";
+		phy-handle = <&phy0>;
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x00000 0x60000>;
+				read-only;
+			};
+
+			partition@60000 {
+				label = "u-boot-env";
+				reg = <0x60000 0x10000>;
+				read-only;
+			};
+
+			factory: partition@70000 {
+				label = "factory";
+				reg = <0x70000 0x40000>;
+				read-only;
+			};
+
+			partition@b0000 {
+				label = "kernel";
+				reg = <0xb0000 0xb50000>;
+			};
+		};
+	};
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+	status = "okay";
+};
+
+&pciephy1 {
+	status = "okay";
+};
+
+&pio {
+	eth_pins: eth-pins {
+		mux {
+			function = "eth";
+			groups = "mdc_mdio";
+		};
+	};
+
+	ephy_leds_pins: ephy-leds-pins {
+		mux {
+			function = "led";
+			groups = "gphy_leds_0", "ephy_leds";
+		};
+	};
+
+	i2c_pins: i2c-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c_0";
+		};
+
+		conf {
+			pins = "I2C_SDA", "I2C_SCL";
+			drive-strength = <4>;
+			bias-disable;
+		};
+	};
+
+	pcie_pins: pcie-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie_clkreq",
+				 "pcie_pereset",
+				 "pcie_wake";
+		};
+	};
+
+	pwm_pins: pwm-pins {
+		mux {
+			function = "pwm";
+			groups = "pwm_0";
+		};
+	};
+
+	/* SPI-NOR is shared pin with serial NAND */
+	qspi_pins: qspi-pins {
+		mux {
+			function = "flash";
+			groups = "spi_nor";
+		};
+	};
+
+	/* Serial NAND is shared pin with SPI-NOR */
+	serial_nand_pins: serial-nand-pins {
+		mux {
+			function = "flash";
+			groups = "snfi";
+		};
+	};
+
+	spi_pins: spi-pins {
+		mux {
+			function = "spi";
+			groups = "spi_0";
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		mux {
+			function = "uart";
+			groups = "uart0_txd_rxd" ;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		mux {
+			function = "uart";
+			groups = "uart1_0_tx_rx" ;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		mux {
+			function = "uart";
+			groups = "uart2_0_txd_rxd" ;
+		};
+	};
+
+	watchdog_pins: watchdog-pins {
+		mux {
+			function = "watchdog";
+			groups = "watchdog";
+		};
+	};
+};
+
+&spi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins>;
+	status = "okay";
+};
+
+&ssusb {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&watchdog {
+	pinctrl-names = "default";
+	pinctrl-0 = <&watchdog_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt7629.dtsi b/arch/arm/boot/dts/mediatek/mt7629.dtsi
new file mode 100644
index 000000000000..acab0883a3bb
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt7629.dtsi
@@ -0,0 +1,491 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ *
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7629-clk.h>
+#include <dt-bindings/power/mt7622-power.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/reset/mt7629-resets.h>
+
+/ {
+	compatible = "mediatek,mt7629";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt6589-smp";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			clock-frequency = <1250000000>;
+			cci-control-port = <&cci_control2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			clock-frequency = <1250000000>;
+			cci-control-port = <&cci_control2>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	clk20m: oscillator-0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <20000000>;
+		clock-output-names = "clk20m";
+	};
+
+	clk40m: oscillator-1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+		clock-output-names = "clkxtal";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <20000000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		infracfg: syscon@10000000 {
+			compatible = "mediatek,mt7629-infracfg", "syscon";
+			reg = <0x10000000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pericfg: syscon@10002000 {
+			compatible = "mediatek,mt7629-pericfg", "syscon";
+			reg = <0x10002000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		scpsys: power-controller@10006000 {
+			compatible = "mediatek,mt7629-scpsys",
+				     "mediatek,mt7622-scpsys";
+			#power-domain-cells = <1>;
+			reg = <0x10006000 0x1000>;
+			clocks = <&topckgen CLK_TOP_HIF_SEL>;
+			clock-names = "hif_sel";
+			assigned-clocks = <&topckgen CLK_TOP_HIF_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
+			infracfg = <&infracfg>;
+		};
+
+		timer: timer@10009000 {
+			compatible = "mediatek,mt7629-timer",
+				     "mediatek,mt6765-timer";
+			reg = <0x10009000 0x60>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk20m>;
+			clock-names = "clk20m";
+		};
+
+		sysirq: interrupt-controller@10200a80 {
+			compatible = "mediatek,mt7629-sysirq",
+				     "mediatek,mt6577-sysirq";
+			reg = <0x10200a80 0x20>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+		};
+
+		apmixedsys: syscon@10209000 {
+			compatible = "mediatek,mt7629-apmixedsys", "syscon";
+			reg = <0x10209000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		rng: rng@1020f000 {
+			compatible = "mediatek,mt7629-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0x1020f000 0x100>;
+			clocks = <&infracfg CLK_INFRA_TRNG_PD>;
+			clock-names = "rng";
+		};
+
+		topckgen: syscon@10210000 {
+			compatible = "mediatek,mt7629-topckgen", "syscon";
+			reg = <0x10210000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		watchdog: watchdog@10212000 {
+			compatible = "mediatek,mt7629-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0x10212000 0x100>;
+		};
+
+		pio: pinctrl@10217000 {
+			compatible = "mediatek,mt7629-pinctrl";
+			reg = <0x10217000 0x8000>,
+			      <0x10005000 0x1000>;
+			reg-names = "base", "eint";
+			gpio-controller;
+			gpio-ranges = <&pio 0 0 79>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+		};
+
+		gic: interrupt-controller@10300000 {
+			compatible = "arm,gic-400";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0x10310000 0x1000>,
+			      <0x10320000 0x1000>,
+			      <0x10340000 0x2000>,
+			      <0x10360000 0x2000>;
+		};
+
+		cci: cci@10390000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x10390000 0x1000>;
+			ranges = <0 0x10390000 0x10000>;
+
+			cci_control0: slave-if@1000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace-lite";
+				reg = <0x1000 0x1000>;
+			};
+
+			cci_control1: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+
+			cci_control2: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+
+			pmu@9000 {
+				compatible = "arm,cci-400-pmu,r1";
+				reg = <0x9000 0x5000>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt7629-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0x11002000 0x400>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART_SEL>,
+				 <&pericfg CLK_PERI_UART0_PD>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt7629-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0x11003000 0x400>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART_SEL>,
+				 <&pericfg CLK_PERI_UART1_PD>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt7629-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0x11004000 0x400>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART_SEL>,
+				 <&pericfg CLK_PERI_UART2_PD>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		pwm: pwm@11006000 {
+			compatible = "mediatek,mt7629-pwm";
+			reg = <0x11006000 0x1000>;
+			#pwm-cells = <2>;
+			clocks = <&topckgen CLK_TOP_PWM_SEL>,
+				 <&pericfg CLK_PERI_PWM_PD>,
+				 <&pericfg CLK_PERI_PWM1_PD>;
+			clock-names = "top", "main", "pwm1";
+			assigned-clocks = <&topckgen CLK_TOP_PWM_SEL>;
+			assigned-clock-parents =
+					<&topckgen CLK_TOP_UNIVPLL2_D4>;
+			status = "disabled";
+		};
+
+		i2c: i2c@11007000 {
+			compatible = "mediatek,mt7629-i2c",
+				     "mediatek,mt2712-i2c";
+			reg = <0x11007000 0x90>,
+			      <0x11000100 0x80>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <4>;
+			clocks = <&pericfg CLK_PERI_I2C0_PD>,
+				 <&pericfg CLK_PERI_AP_DMA_PD>;
+			clock-names = "main", "dma";
+			assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi: spi@1100a000 {
+			compatible = "mediatek,mt7629-spi",
+				     "mediatek,mt7622-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1100a000 0x100>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+				 <&topckgen CLK_TOP_SPI0_SEL>,
+				 <&pericfg CLK_PERI_SPI0_PD>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		qspi: spi@11014000 {
+			compatible = "mediatek,mt7629-nor",
+				     "mediatek,mt8173-nor";
+			reg = <0x11014000 0xe0>;
+			clocks = <&pericfg CLK_PERI_FLASH_PD>,
+				 <&topckgen CLK_TOP_FLASH_SEL>;
+			clock-names = "spi", "sf";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ssusbsys: syscon@1a000000 {
+			compatible = "mediatek,mt7629-ssusbsys", "syscon";
+			reg = <0x1a000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		ssusb: usb@1a0c0000 {
+			compatible = "mediatek,mt7629-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0x1a0c0000 0x01000>,
+			      <0x1a0c3e00 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
+				 <&ssusbsys CLK_SSUSB_REF_EN>,
+				 <&ssusbsys CLK_SSUSB_MCU_EN>,
+				 <&ssusbsys CLK_SSUSB_DMA_EN>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+			assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>,
+					  <&topckgen CLK_TOP_SATA_SEL>,
+					  <&topckgen CLK_TOP_HIF_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>,
+						 <&topckgen CLK_TOP_UNIVPLL2_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL1_D2>;
+			power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF1>;
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>;
+			status = "disabled";
+		};
+
+		u3phy0: t-phy@1a0c4000 {
+			compatible = "mediatek,mt7629-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x1a0c4000 0xe00>;
+			status = "disabled";
+
+			u2port0: usb-phy@0 {
+				reg = <0 0x700>;
+				clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+
+			u3port0: usb-phy@700 {
+				reg = <0x700 0x700>;
+				clocks = <&clk20m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
+		pciesys: syscon@1a100800 {
+			compatible = "mediatek,mt7629-pciesys", "syscon";
+			reg = <0x1a100800 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pciecfg: pciecfg@1a140000 {
+			compatible = "mediatek,generic-pciecfg", "syscon";
+			reg = <0x1a140000 0x1000>;
+		};
+
+		pcie1: pcie@1a145000 {
+			compatible = "mediatek,mt7629-pcie";
+			device_type = "pci";
+			reg = <0x1a145000 0x1000>;
+			reg-names = "port1";
+			linux,pci-domain = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "pcie_irq";
+			clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
+				 <&pciesys CLK_PCIE_P0_AHB_EN>,
+				 <&pciesys CLK_PCIE_P1_AUX_EN>,
+				 <&pciesys CLK_PCIE_P1_AXI_EN>,
+				 <&pciesys CLK_PCIE_P1_OBFF_EN>,
+				 <&pciesys CLK_PCIE_P1_PIPE_EN>;
+			clock-names = "sys_ck1", "ahb_ck1",
+				      "aux_ck1", "axi_ck1",
+				      "obff_ck1", "pipe_ck1";
+			assigned-clocks = <&topckgen CLK_TOP_SATA_SEL>,
+					  <&topckgen CLK_TOP_AXI_SEL>,
+					  <&topckgen CLK_TOP_HIF_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+						 <&topckgen CLK_TOP_SYSPLL1_D2>,
+						 <&topckgen CLK_TOP_UNIVPLL1_D2>;
+			phys = <&pcieport1 PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy1";
+			power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>;
+			status = "disabled";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+			pcie_intc1: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		pciephy1: t-phy@1a14a000 {
+			compatible = "mediatek,mt7629-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x1a14a000 0x1000>;
+			status = "disabled";
+
+			pcieport1: pcie-phy@0 {
+				reg = <0 0x1000>;
+				clocks = <&clk20m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
+		ethsys: syscon@1b000000 {
+			compatible = "mediatek,mt7629-ethsys", "syscon";
+			reg = <0x1b000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		eth: ethernet@1b100000 {
+			compatible = "mediatek,mt7629-eth","syscon";
+			reg = <0x1b100000 0x20000>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_ETH_SEL>,
+				 <&topckgen CLK_TOP_F10M_REF_SEL>,
+				 <&ethsys CLK_ETH_ESW_EN>,
+				 <&ethsys CLK_ETH_GP0_EN>,
+				 <&ethsys CLK_ETH_GP1_EN>,
+				 <&ethsys CLK_ETH_GP2_EN>,
+				 <&ethsys CLK_ETH_FE_EN>,
+				 <&sgmiisys0 CLK_SGMII_TX_EN>,
+				 <&sgmiisys0 CLK_SGMII_RX_EN>,
+				 <&sgmiisys0 CLK_SGMII_CDR_REF>,
+				 <&sgmiisys0 CLK_SGMII_CDR_FB>,
+				 <&sgmiisys1 CLK_SGMII_TX_EN>,
+				 <&sgmiisys1 CLK_SGMII_RX_EN>,
+				 <&sgmiisys1 CLK_SGMII_CDR_REF>,
+				 <&sgmiisys1 CLK_SGMII_CDR_FB>,
+				 <&apmixedsys CLK_APMIXED_SGMIPLL>,
+				 <&apmixedsys CLK_APMIXED_ETH2PLL>;
+			clock-names = "ethif", "sgmiitop", "esw", "gp0", "gp1",
+				      "gp2", "fe", "sgmii_tx250m", "sgmii_rx250m",
+				      "sgmii_cdr_ref", "sgmii_cdr_fb",
+				      "sgmii2_tx250m", "sgmii2_rx250m",
+				      "sgmii2_cdr_ref", "sgmii2_cdr_fb",
+				      "sgmii_ck", "eth2pll";
+			assigned-clocks = <&topckgen CLK_TOP_ETH_SEL>,
+					  <&topckgen CLK_TOP_F10M_REF_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>,
+						 <&topckgen CLK_TOP_SGMIIPLL_D2>;
+			power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
+			mediatek,ethsys = <&ethsys>;
+			mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
+			mediatek,infracfg = <&infracfg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sgmiisys0: syscon@1b128000 {
+			compatible = "mediatek,mt7629-sgmiisys", "syscon";
+			reg = <0x1b128000 0x3000>;
+			#clock-cells = <1>;
+		};
+
+		sgmiisys1: syscon@1b130000 {
+			compatible = "mediatek,mt7629-sgmiisys", "syscon";
+			reg = <0x1b130000 0x3000>;
+			#clock-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mediatek/mt8127-moose.dts b/arch/arm/boot/dts/mediatek/mt8127-moose.dts
new file mode 100644
index 000000000000..560687af87dc
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt8127-moose.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Joe.C <yingjoe.chen@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include "mt8127.dtsi"
+
+/ {
+	model = "MediaTek MT8127 Moose Board";
+	compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mediatek/mt8127.dtsi
index 916c095d11b9..aced173c2a52 100644
--- a/arch/arm/boot/dts/mt8127.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt8127.dtsi
@@ -1,22 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2014 MediaTek Inc.
  * Author: Joe.C <yingjoe.chen@mediatek.com>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton64.dtsi"
 
 / {
+	#address-cells = <2>;
+	#size-cells = <2>;
 	compatible = "mediatek,mt8127";
 	interrupt-parent = <&sysirq>;
 
diff --git a/arch/arm/boot/dts/mt8135-evbp1.dts b/arch/arm/boot/dts/mediatek/mt8135-evbp1.dts
index 460db6d05952..f6147fe62f41 100644
--- a/arch/arm/boot/dts/mt8135-evbp1.dts
+++ b/arch/arm/boot/dts/mediatek/mt8135-evbp1.dts
@@ -1,15 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2014 MediaTek Inc.
  * Author: Joe.C <yingjoe.chen@mediatek.com>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 /dts-v1/;
@@ -20,6 +13,7 @@
 	compatible = "mediatek,mt8135-evbp1", "mediatek,mt8135";
 
 	memory {
+		device_type = "memory";
 		reg = <0 0x80000000 0 0x40000000>;
 	};
 };
diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mediatek/mt8135.dtsi
index a97b4ee4ae79..0f291ad22d3a 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt8135.dtsi
@@ -1,25 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2014 MediaTek Inc.
  * Author: Joe.C <yingjoe.chen@mediatek.com>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <dt-bindings/clock/mt8135-clk.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/mt8135-resets.h>
-#include "skeleton64.dtsi"
-#include "mt8135-pinfunc.h"
+#include <dt-bindings/pinctrl/mt8135-pinfunc.h>
 
 / {
+	#address-cells = <2>;
+	#size-cells = <2>;
 	compatible = "mediatek,mt8135";
 	interrupt-parent = <&sysirq>;
 
@@ -158,7 +152,6 @@
 			compatible = "mediatek,mt8135-pinctrl";
 			reg = <0 0x1000b000 0 0x1000>;
 			mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>;
-			pins-are-numbered;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
deleted file mode 100644
index 15204e44161d..000000000000
--- a/arch/arm/boot/dts/meson.dtsi
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * Copyright 2014 Carlo Caione <carlo@caione.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this library; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-/include/ "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&gic>;
-
-	L2: l2-cache-controller@c4200000 {
-		compatible = "arm,pl310-cache";
-		reg = <0xc4200000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	gic: interrupt-controller@c4301000 {
-		compatible = "arm,cortex-a9-gic";
-		reg = <0xc4301000 0x1000>,
-		      <0xc4300100 0x0100>;
-		interrupt-controller;
-		#interrupt-cells = <3>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		cbus: cbus@c1100000 {
-			compatible = "simple-bus";
-			reg = <0xc1100000 0x200000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc1100000 0x200000>;
-
-			hwrng: rng@8100 {
-				compatible = "amlogic,meson-rng";
-				reg = <0x8100 0x8>;
-			};
-
-			uart_A: serial@84c0 {
-				compatible = "amlogic,meson-uart";
-				reg = <0x84c0 0x18>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			uart_B: serial@84dc {
-				compatible = "amlogic,meson-uart";
-				reg = <0x84dc 0x18>;
-				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			i2c_A: i2c@8500 {
-				compatible = "amlogic,meson6-i2c";
-				reg = <0x8500 0x20>;
-				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			saradc: adc@8680 {
-				compatible = "amlogic,meson-saradc";
-				reg = <0x8680 0x34>;
-				#io-channel-cells = <1>;
-				interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			uart_C: serial@8700 {
-				compatible = "amlogic,meson-uart";
-				reg = <0x8700 0x18>;
-				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			i2c_B: i2c@87c0 {
-				compatible = "amlogic,meson6-i2c";
-				reg = <0x87c0 0x20>;
-				interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			usb0_phy: phy@8800 {
-				compatible = "amlogic,meson-mx-usb2-phy";
-				#phy-cells = <0>;
-				reg = <0x8800 0x20>;
-				status = "disabled";
-			};
-
-			usb1_phy: phy@8820 {
-				compatible = "amlogic,meson-mx-usb2-phy";
-				#phy-cells = <0>;
-				reg = <0x8820 0x20>;
-				status = "disabled";
-			};
-
-			spifc: spi@8c80 {
-				compatible = "amlogic,meson6-spifc";
-				reg = <0x8c80 0x80>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			wdt: watchdog@9900 {
-				compatible = "amlogic,meson6-wdt";
-				reg = <0x9900 0x8>;
-				interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
-			};
-
-			timer@9940 {
-				compatible = "amlogic,meson6-timer";
-				reg = <0x9940 0x18>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>;
-			};
-		};
-
-		aobus: aobus@c8100000 {
-			compatible = "simple-bus";
-			reg = <0xc8100000 0x100000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0xc8100000 0x100000>;
-
-			ir_receiver: ir-receiver@480 {
-				compatible= "amlogic,meson6-ir";
-				reg = <0x480 0x20>;
-				interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			uart_AO: serial@4c0 {
-				compatible = "amlogic,meson-uart";
-				reg = <0x4c0 0x18>;
-				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-			};
-
-			i2c_AO: i2c@500 {
-				compatible = "amlogic,meson6-i2c";
-				reg = <0x500 0x20>;
-				interrupts = <GIC_SPI 92 IRQ_TYPE_EDGE_RISING>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		usb0: usb@c9040000 {
-			compatible = "snps,dwc2";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0xc9040000 0x40000>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>;
-			phys = <&usb0_phy>;
-			phy-names = "usb2-phy";
-			dr_mode = "host";
-			status = "disabled";
-		};
-
-		usb1: usb@c90c0000 {
-			compatible = "snps,dwc2";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0xc90c0000 0x40000>;
-			interrupts = <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
-			phys = <&usb1_phy>;
-			phy-names = "usb2-phy";
-			dr_mode = "host";
-			status = "disabled";
-		};
-
-		ethmac: ethernet@c9410000 {
-			compatible = "amlogic,meson6-dwmac", "snps,dwmac";
-			reg = <0xc9410000 0x10000
-			       0xc1108108 0x4>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "macirq";
-			status = "disabled";
-		};
-	};
-}; /* end of / */
diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts
deleted file mode 100644
index 9444b0d9628f..000000000000
--- a/arch/arm/boot/dts/meson6-atv1200.dts
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright 2014 Carlo Caione <carlo@caione.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this library; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "meson6.dtsi"
-
-/ {
-	model = "Geniatech ATV1200";
-	compatible = "geniatech,atv1200", "amlogic,meson6";
-
-	aliases {
-		serial0 = &uart_AO;
-	};
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-};
-
-&uart_AO {
-	status = "okay";
-};
-
-&ethmac {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi
deleted file mode 100644
index 8557b6117a4b..000000000000
--- a/arch/arm/boot/dts/meson6.dtsi
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright 2014 Carlo Caione <carlo@caione.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this library; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "meson.dtsi"
-
-/ {
-	model = "Amlogic Meson6 SoC";
-	compatible = "amlogic,meson6";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@200 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x200>;
-		};
-
-		cpu@201 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x201>;
-		};
-	};
-
-	clk81: clk@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <200000000>;
-	};
-}; /* end of / */
diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/meson8-minix-neo-x8.dts
deleted file mode 100644
index 8bceb8d343f6..000000000000
--- a/arch/arm/boot/dts/meson8-minix-neo-x8.dts
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * Copyright 2014 Beniamino Galvani <b.galvani@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "meson8.dtsi"
-
-/ {
-	model = "MINIX NEO-X8";
-	compatible = "minix,neo-x8", "amlogic,meson8";
-
-	aliases {
-		serial0 = &uart_AO;
-	};
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		blue {
-			label = "x8:blue:power";
-			gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
-&i2c_AO {
-	status = "okay";
-	pinctrl-0 = <&i2c_ao_pins>;
-	pinctrl-names = "default";
-
-	pmic@32 {
-		compatible = "ricoh,rn5t618";
-		reg = <0x32>;
-		system-power-controller;
-
-		regulators {
-		};
-	};
-
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&spifc {
-	status = "okay";
-	pinctrl-0 = <&spi_nor_pins>;
-	pinctrl-names = "default";
-
-	spi-flash@0 {
-		compatible = "mxicy,mx25l1606e";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		spi-max-frequency = <30000000>;
-
-		partition@0 {
-			label = "boot";
-			reg = <0x0 0x100000>;
-		};
-
-		partition@100000 {
-			label = "env";
-			reg = <0x100000 0x10000>;
-		};
-	};
-};
-
-&ir_receiver {
-	status = "okay";
-	pinctrl-0 = <&ir_recv_pins>;
-	pinctrl-names = "default";
-};
-
-&ethmac {
-	status = "okay";
-	pinctrl-0 = <&eth_pins>;
-	pnictrl-names = "default";
-};
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
deleted file mode 100644
index cada35828931..000000000000
--- a/arch/arm/boot/dts/meson8.dtsi
+++ /dev/null
@@ -1,323 +0,0 @@
-/*
- * Copyright 2014 Carlo Caione <carlo@caione.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public License
- *     along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/clock/meson8b-clkc.h>
-#include <dt-bindings/gpio/meson8-gpio.h>
-#include "meson.dtsi"
-
-/ {
-	model = "Amlogic Meson8 SoC";
-	compatible = "amlogic,meson8";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@200 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x200>;
-		};
-
-		cpu@201 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x201>;
-		};
-
-		cpu@202 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x202>;
-		};
-
-		cpu@203 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x203>;
-		};
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/* 2 MiB reserved for Hardware ROM Firmware? */
-		hwrom@0 {
-			reg = <0x0 0x200000>;
-			no-map;
-		};
-
-		/*
-		 * 1 MiB reserved for the "ARM Power Firmware": this is ARM
-		 * code which is responsible for system suspend. It loads a
-		 * piece of ARC code ("arc_power" in the vendor u-boot tree)
-		 * into SRAM, executes that and shuts down the (last) ARM core.
-		 * The arc_power firmware then checks various wakeup sources
-		 * (IR remote receiver, HDMI CEC, WIFI and Bluetooth wakeup or
-		 * simply the power key) and re-starts the ARM core once it
-		 * detects a wakeup request.
-		 */
-		power-firmware@4f00000 {
-			reg = <0x4f00000 0x100000>;
-			no-map;
-		};
-	};
-
-	scu@c4300000 {
-		compatible = "arm,cortex-a9-scu";
-		reg = <0xc4300000 0x100>;
-	};
-}; /* end of / */
-
-&aobus {
-	pinctrl_aobus: pinctrl@84 {
-		compatible = "amlogic,meson8-aobus-pinctrl";
-		reg = <0x84 0xc>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		gpio_ao: ao-bank@14 {
-			reg = <0x14 0x4>,
-			      <0x2c 0x4>,
-			      <0x24 0x8>;
-			reg-names = "mux", "pull", "gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pinctrl_aobus 0 120 16>;
-		};
-
-		uart_ao_a_pins: uart_ao_a {
-			mux {
-				groups = "uart_tx_ao_a", "uart_rx_ao_a";
-				function = "uart_ao";
-			};
-		};
-
-		i2c_ao_pins: i2c_mst_ao {
-			mux {
-				groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
-				function = "i2c_mst_ao";
-			};
-		};
-
-		ir_recv_pins: remote {
-			mux {
-				groups = "remote_input";
-				function = "remote";
-			};
-		};
-
-		pwm_f_ao_pins: pwm-f-ao {
-			mux {
-				groups = "pwm_f_ao";
-				function = "pwm_f_ao";
-			};
-		};
-	};
-};
-
-&cbus {
-	clkc: clock-controller@4000 {
-		#clock-cells = <1>;
-		compatible = "amlogic,meson8-clkc";
-		reg = <0x8000 0x4>, <0x4000 0x460>;
-	};
-
-	pinctrl_cbus: pinctrl@9880 {
-		compatible = "amlogic,meson8-cbus-pinctrl";
-		reg = <0x9880 0x10>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		gpio: banks@80b0 {
-			reg = <0x80b0 0x28>,
-			      <0x80e8 0x18>,
-			      <0x8120 0x18>,
-			      <0x8030 0x30>;
-			reg-names = "mux", "pull", "pull-enable", "gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pinctrl_cbus 0 0 120>;
-		};
-
-		sd_a_pins: sd-a {
-			mux {
-				groups = "sd_d0_a", "sd_d1_a", "sd_d2_a",
-					"sd_d3_a", "sd_clk_a", "sd_cmd_a";
-				function = "sd_a";
-			};
-		};
-
-		sd_b_pins: sd-b {
-			mux {
-				groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
-					"sd_d3_b", "sd_clk_b", "sd_cmd_b";
-				function = "sd_b";
-			};
-		};
-
-		sd_c_pins: sd-c {
-			mux {
-				groups = "sd_d0_c", "sd_d1_c", "sd_d2_c",
-					"sd_d3_c", "sd_clk_c", "sd_cmd_c";
-				function = "sd_c";
-			};
-		};
-
-		spi_nor_pins: nor {
-			mux {
-				groups = "nor_d", "nor_q", "nor_c", "nor_cs";
-				function = "nor";
-			};
-		};
-
-		eth_pins: ethernet {
-			mux {
-				groups = "eth_tx_clk_50m", "eth_tx_en",
-					 "eth_txd1", "eth_txd0",
-					 "eth_rx_clk_in", "eth_rx_dv",
-					 "eth_rxd1", "eth_rxd0", "eth_mdio",
-					 "eth_mdc";
-				function = "ethernet";
-			};
-		};
-
-		pwm_e_pins: pwm-e {
-			mux {
-				groups = "pwm_e";
-				function = "pwm_e";
-			};
-		};
-	};
-};
-
-&ethmac {
-	clocks = <&clkc CLKID_ETH>;
-	clock-names = "stmmaceth";
-};
-
-&hwrng {
-	compatible = "amlogic,meson8-rng", "amlogic,meson-rng";
-	clocks = <&clkc CLKID_RNG0>;
-	clock-names = "core";
-};
-
-&i2c_AO {
-	clocks = <&clkc CLKID_CLK81>;
-};
-
-&i2c_A {
-	clocks = <&clkc CLKID_CLK81>;
-};
-
-&i2c_B {
-	clocks = <&clkc CLKID_CLK81>;
-};
-
-&L2 {
-	arm,data-latency = <3 3 3>;
-	arm,tag-latency = <2 2 2>;
-	arm,filter-ranges = <0x100000 0xc0000000>;
-};
-
-&saradc {
-	compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc";
-	clocks = <&clkc CLKID_XTAL>,
-		<&clkc CLKID_SAR_ADC>,
-		<&clkc CLKID_SANA>;
-	clock-names = "clkin", "core", "sana";
-};
-
-&spifc {
-	clocks = <&clkc CLKID_CLK81>;
-};
-
-&uart_AO {
-	clocks = <&clkc CLKID_CLK81>;
-};
-
-&uart_A {
-	clocks = <&clkc CLKID_CLK81>;
-};
-
-&uart_B {
-	clocks = <&clkc CLKID_CLK81>;
-};
-
-&uart_C {
-	clocks = <&clkc CLKID_CLK81>;
-};
-
-&usb0 {
-	compatible = "amlogic,meson8-usb", "snps,dwc2";
-	clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
-	clock-names = "otg";
-};
-
-&usb1 {
-	compatible = "amlogic,meson8-usb", "snps,dwc2";
-	clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
-	clock-names = "otg";
-};
-
-&usb0_phy {
-	compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy";
-	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
-	clock-names = "usb_general", "usb";
-};
-
-&usb1_phy {
-	compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy";
-	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
-	clock-names = "usb_general", "usb";
-};
diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts
deleted file mode 100644
index c7fdaeabbe7b..000000000000
--- a/arch/arm/boot/dts/meson8b-mxq.dts
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Copyright 2015 Endless Mobile, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public License
- *     along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "meson8b.dtsi"
-
-/ {
-	model = "TRONFY MXQ S805";
-	compatible = "tronfy,mxq", "amlogic,meson8b";
-
-	aliases {
-		serial0 = &uart_AO;
-	};
-
-	memory {
-		reg = <0x40000000 0x40000000>;
-	};
-};
-
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
deleted file mode 100644
index e50f1a1fdbc7..000000000000
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright 2015 Endless Mobile, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public License
- *     along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "meson8b.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Hardkernel ODROID-C1";
-	compatible = "hardkernel,odroid-c1", "amlogic,meson8b";
-
-	aliases {
-		serial0 = &uart_AO;
-	};
-
-	memory {
-		reg = <0x40000000 0x40000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		blue {
-			label = "c1:blue:alive";
-			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-};
-
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
deleted file mode 100644
index 72e4f425f190..000000000000
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * Copyright 2015 Endless Mobile, Inc.
- * Author: Carlo Caione <carlo@endlessm.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public License
- *     along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/clock/meson8b-clkc.h>
-#include <dt-bindings/gpio/meson8b-gpio.h>
-#include <dt-bindings/reset/amlogic,meson8b-reset.h>
-#include "meson.dtsi"
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@200 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a5";
-			next-level-cache = <&L2>;
-			reg = <0x200>;
-		};
-
-		cpu@201 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a5";
-			next-level-cache = <&L2>;
-			reg = <0x201>;
-		};
-
-		cpu@202 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a5";
-			next-level-cache = <&L2>;
-			reg = <0x202>;
-		};
-
-		cpu@203 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a5";
-			next-level-cache = <&L2>;
-			reg = <0x203>;
-		};
-	};
-
-	scu@c4300000 {
-		compatible = "arm,cortex-a5-scu";
-		reg = <0xc4300000 0x100>;
-	};
-}; /* end of / */
-
-&aobus {
-	pinctrl_aobus: pinctrl@84 {
-		compatible = "amlogic,meson8b-aobus-pinctrl";
-		reg = <0x84 0xc>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		gpio_ao: ao-bank@14 {
-			reg = <0x14 0x4>,
-				<0x2c 0x4>,
-				<0x24 0x8>;
-			reg-names = "mux", "pull", "gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pinctrl_aobus 0 130 16>;
-		};
-
-		uart_ao_a_pins: uart_ao_a {
-			mux {
-				groups = "uart_tx_ao_a", "uart_rx_ao_a";
-				function = "uart_ao";
-			};
-		};
-	};
-};
-
-&cbus {
-	clkc: clock-controller@4000 {
-		#clock-cells = <1>;
-		compatible = "amlogic,meson8b-clkc";
-		reg = <0x8000 0x4>, <0x4000 0x460>;
-	};
-
-	reset: reset-controller@4404 {
-		compatible = "amlogic,meson8b-reset";
-		reg = <0x4404 0x20>;
-		#reset-cells = <1>;
-	};
-
-	pwm_ab: pwm@8550 {
-		compatible = "amlogic,meson8b-pwm";
-		reg = <0x8550 0x10>;
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
-	pwm_cd: pwm@8650 {
-		compatible = "amlogic,meson8b-pwm";
-		reg = <0x8650 0x10>;
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
-	pwm_ef: pwm@86c0 {
-		compatible = "amlogic,meson8b-pwm";
-		reg = <0x86c0 0x10>;
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
-	wdt: watchdog@9900 {
-		compatible = "amlogic,meson8b-wdt";
-		reg = <0x9900 0x8>;
-		interrupts = <0 0 1>;
-	};
-
-	pinctrl_cbus: pinctrl@9880 {
-		compatible = "amlogic,meson8b-cbus-pinctrl";
-		reg = <0x9880 0x10>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		gpio: banks@80b0 {
-			reg = <0x80b0 0x28>,
-				<0x80e8 0x18>,
-				<0x8120 0x18>,
-				<0x8030 0x38>;
-			reg-names = "mux", "pull", "pull-enable", "gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pinctrl_cbus 0 0 130>;
-		};
-	};
-};
-
-&ethmac {
-	clocks = <&clkc CLKID_ETH>;
-	clock-names = "stmmaceth";
-};
-
-&hwrng {
-	compatible = "amlogic,meson8b-rng", "amlogic,meson-rng";
-	clocks = <&clkc CLKID_RNG0>;
-	clock-names = "core";
-};
-
-&L2 {
-	arm,data-latency = <3 3 3>;
-	arm,tag-latency = <2 2 2>;
-	arm,filter-ranges = <0x100000 0xc0000000>;
-};
-
-&saradc {
-	compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc";
-	clocks = <&clkc CLKID_XTAL>,
-		<&clkc CLKID_SAR_ADC>,
-		<&clkc CLKID_SANA>;
-	clock-names = "clkin", "core", "sana";
-};
-
-&uart_AO {
-	clocks = <&clkc CLKID_CLK81>;
-};
-
-&uart_A {
-	clocks = <&clkc CLKID_CLK81>;
-};
-
-&uart_B {
-	clocks = <&clkc CLKID_CLK81>;
-};
-
-&uart_C {
-	clocks = <&clkc CLKID_CLK81>;
-};
-
-&usb0 {
-	compatible = "amlogic,meson8b-usb", "snps,dwc2";
-	clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
-	clock-names = "otg";
-};
-
-&usb1 {
-	compatible = "amlogic,meson8b-usb", "snps,dwc2";
-	clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
-	clock-names = "otg";
-};
-
-&usb0_phy {
-	compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy";
-	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
-	clock-names = "usb_general", "usb";
-	resets = <&reset RESET_USB_OTG>;
-};
-
-&usb1_phy {
-	compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy";
-	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
-	clock-names = "usb_general", "usb";
-	resets = <&reset RESET_USB_OTG>;
-};
diff --git a/arch/arm/boot/dts/microchip/Makefile b/arch/arm/boot/dts/microchip/Makefile
new file mode 100644
index 000000000000..79cd38fdc7da
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/Makefile
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0
+# Enables support for device-tree overlays
+DTC_FLAGS_at91-sam9x60_curiosity := -@
+DTC_FLAGS_at91-sam9x60ek := -@
+DTC_FLAGS_at91-sam9x75_curiosity := -@
+DTC_FLAGS_at91-sama5d27_som1_ek := -@
+DTC_FLAGS_at91-sama5d27_wlsom1_ek := -@
+DTC_FLAGS_at91-sama5d29_curiosity := -@
+DTC_FLAGS_at91-sama5d2_icp := -@
+DTC_FLAGS_at91-sama5d2_ptc_ek := -@
+DTC_FLAGS_at91-sama5d2_xplained := -@
+DTC_FLAGS_at91-sama5d3_eds := -@
+DTC_FLAGS_at91-sama5d3_xplained := -@
+DTC_FLAGS_at91-sama5d4_xplained := -@
+DTC_FLAGS_at91-sama7d65_curiosity := -@
+DTC_FLAGS_at91-sama7g54_curiosity := -@
+DTC_FLAGS_at91-sama7g5ek := -@
+dtb-$(CONFIG_SOC_AT91RM9200) += \
+	at91rm9200ek.dtb \
+	mpa1600.dtb
+dtb-$(CONFIG_SOC_AT91SAM9) += \
+	animeo_ip.dtb \
+	at91-qil_a9260.dtb \
+	aks-cdu.dtb \
+	ethernut5.dtb \
+	evk-pro3.dtb \
+	tny_a9260.dtb \
+	usb_a9260.dtb \
+	at91sam9260ek.dtb \
+	at91sam9261ek.dtb \
+	at91sam9263ek.dtb \
+	at91-sam9_l9260.dtb \
+	tny_a9263.dtb \
+	usb_a9263.dtb \
+	at91-foxg20.dtb \
+	at91-kizbox.dtb \
+	at91-lmu5000.dtb \
+	at91sam9g20ek.dtb \
+	at91sam9g20ek_2mmc.dtb \
+	tny_a9g20.dtb \
+	usb_a9g20.dtb \
+	usb_a9g20_lpw.dtb \
+	at91sam9m10g45ek.dtb \
+	pm9g45.dtb \
+	at91sam9n12ek.dtb \
+	at91sam9rlek.dtb \
+	at91-ariag25.dtb \
+	at91-ariettag25.dtb \
+	at91-cosino_mega2560.dtb \
+	at91-kizboxmini-base.dtb \
+	at91-kizboxmini-mb.dtb \
+	at91-kizboxmini-rd.dtb \
+	at91-q5xr5.dtb \
+	at91-smartkiz.dtb \
+	at91-wb45n.dtb \
+	at91sam9g15ek.dtb \
+	at91sam9g25-gardena-smart-gateway.dtb \
+	at91sam9g25ek.dtb \
+	at91sam9g35ek.dtb \
+	at91sam9x25ek.dtb \
+	at91sam9x35ek.dtb
+dtb-$(CONFIG_SOC_SAM9X60) += \
+	at91-sam9x60_curiosity.dtb \
+	at91-sam9x60ek.dtb
+dtb-$(CONFIG_SOC_SAM9X7) += \
+	at91-sam9x75_curiosity.dtb
+dtb-$(CONFIG_SOC_SAM_V7) += \
+	at91-kizbox2-2.dtb \
+	at91-kizbox3-hs.dtb \
+	at91-nattis-2-natte-2.dtb \
+	at91-sama5d27_som1_ek.dtb \
+	at91-sama5d27_wlsom1_ek.dtb \
+	at91-sama5d29_curiosity.dtb \
+	at91-sama5d2_icp.dtb \
+	at91-sama5d2_ptc_ek.dtb \
+	at91-sama5d2_xplained.dtb \
+	at91-sama5d3_eds.dtb \
+	at91-sama5d3_ksz9477_evb.dtb \
+	at91-sama5d3_xplained.dtb \
+	at91-dvk_som60.dtb \
+	at91-gatwick.dtb \
+	at91-tse850-3.dtb \
+	at91-wb50n.dtb \
+	sama5d31ek.dtb \
+	sama5d33ek.dtb \
+	sama5d34ek.dtb \
+	sama5d35ek.dtb \
+	sama5d36ek.dtb \
+	sama5d36ek_cmp.dtb \
+	at91-sama5d4_ma5d4evk.dtb \
+	at91-sama5d4_xplained.dtb \
+	at91-sama5d4ek.dtb \
+	at91-vinco.dtb
+dtb-$(CONFIG_SOC_SAMA7D65) += \
+	at91-sama7d65_curiosity.dtb
+dtb-$(CONFIG_SOC_SAMA7G5) += \
+	at91-sama7g54_curiosity.dtb \
+	at91-sama7g5ek.dtb
+
+dtb-$(CONFIG_SOC_LAN966) += \
+	lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \
+	lan966x-kontron-kswitch-d10-mmt-8g.dtb \
+	lan966x-pcb8290.dtb \
+	lan966x-pcb8291.dtb \
+	lan966x-pcb8309.dtb
diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/microchip/aks-cdu.dts
index 888bfcd4a402..302cb872efa1 100644
--- a/arch/arm/boot/dts/aks-cdu.dts
+++ b/arch/arm/boot/dts/microchip/aks-cdu.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * aks-cdu.dts - Device Tree file for AK signal CDU
  *
  * Copyright (C) 2012 AK signal Brno a.s.
  *               2012 Jiri Prchal <jiri.prchal@aksignal.cz>
- *
- * Licensed under GPLv2 or later.
  */
 
 /dts-v1/;
@@ -57,7 +56,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
@@ -99,23 +98,27 @@
 	leds {
 		compatible = "gpio-leds";
 
-		red {
+		led-red {
+			label = "red";
 			gpios = <&pioC 10 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "none";
 		};
 
-		green {
+		led-green {
+			label = "green";
 			gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 			default-state = "on";
 		};
 
-		yellow {
+		led-yellow {
+			label = "yellow";
 			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		blue {
+		led-blue {
+			label = "blue";
 			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/microchip/animeo_ip.dts
index 26ade8c0a960..c11f4f7dac94 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/microchip/animeo_ip.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards
  *
  *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2 only.
  */
 
 /dts-v1/;
@@ -24,10 +23,10 @@
 	};
 
 	chosen {
-		linux,stdout-path = &usart2;
+		stdout-path = &usart2;
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x4000000>;
 	};
 
@@ -43,6 +42,18 @@
 
 	ahb {
 		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			usart0: serial@fffb0000 {
 				pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>;
 				linux,rs485-enabled-at-boot-time;
@@ -70,6 +81,7 @@
 				pinctrl-0 = <&pinctrl_mmc0_clk
 					     &pinctrl_mmc0_slot1_cmd_dat0
 					     &pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
 				status = "okay";
 
 				slot@1 {
@@ -124,7 +136,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
 			status = "okay";
@@ -134,48 +146,46 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power_green {
+		led-power-green {
 			label = "power_green";
 			gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		power_red {
+		led-power-red {
 			label = "power_red";
 			gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		tx_green {
+		led-tx-green {
 			label = "tx_green";
 			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
 		};
 
-		tx_red {
+		led-tx-red {
 			label = "tx_red";
 			gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		keyswitch_in {
+		key-switch-in {
 			label = "keyswitch_in";
 			gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
 			linux,code = <28>;
 			wakeup-source;
 		};
 
-		error_in {
+		key-error-in {
 			label = "error_in";
 			gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
 			linux,code = <29>;
 			wakeup-source;
 		};
 
-		btn {
+		key-s {
 			label = "btn";
 			gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
 			linux,code = <31>;
diff --git a/arch/arm/boot/dts/microchip/at91-ariag25.dts b/arch/arm/boot/dts/microchip/at91-ariag25.dts
new file mode 100644
index 000000000000..713d18f80356
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-ariag25.dts
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-ariag25.dts - Device Tree file for Acme Systems Aria G25 (AT91SAM9G25 based)
+ *
+ * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>,
+ *                    Robert Nelson <robertcnelson@gmail.com>
+ */
+/dts-v1/;
+#include "at91sam9g25.dtsi"
+
+/ {
+	model = "Acme Systems Aria G25";
+	compatible = "acme,ariag25", "atmel,at91sam9x5ek",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+
+	aliases {
+		serial5 = &uart0;
+		serial6 = &uart1;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
+	};
+
+	memory@20000000 {
+		/* 128 MB, change this for 256 MB revision */
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* little green LED in middle of Aria G25 module */
+		aria_led {
+			label = "aria_led";
+			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
+			linux,default-trigger = "heartbeat";
+		};
+
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_w1_0>;
+	};
+};
+
+&adc0 {
+	status = "okay";
+	atmel,adc-channels-used = <0xf>;
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+/* TWD2+TCLK2 hidden behind ethernet, so no i2c2 */
+
+&macb0 {
+	phy-mode = "rmii";
+	/*
+	 * following can be overwritten by bootloader:
+	 * for example u-boot 'ftd set' command
+	 */
+	local-mac-address = [00 00 00 00 00 00];
+	status = "okay";
+};
+
+
+&mmc0 {
+	/* N.B. Aria has no SD card detect (CD), assumed present */
+
+	pinctrl-0 = <
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&pinctrl {
+	w1_0 {
+		pinctrl_w1_0: w1_0-0 {
+			atmel,pins = <0 21 0x0 0x1>; /* PA21 PIO, pull-up */
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+/*
+ * UART0/1 pins are marked as GPIO on
+ * Aria documentation.
+ * Change to "okay" if you need additional serial ports
+ */
+&uart0 {
+	status = "disabled";
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&usart0 {
+	pinctrl-0 = <&pinctrl_usart0
+		     &pinctrl_usart0_rts
+		     &pinctrl_usart0_cts>;
+	status = "okay";
+};
+
+&usart1 {
+	pinctrl-0 = <&pinctrl_usart1
+		     /* &pinctrl_usart1_rts */
+		     /* &pinctrl_usart1_cts */
+		    >;
+	status = "okay";
+};
+
+&usart2 {
+	/* cannot activate RTS2+CTS2, clash with
+	 * ethernet on PB0 and PB1 */
+	pinctrl-0 = <&pinctrl_usart2>;
+	status = "okay";
+};
+
+&usart3 {
+	compatible = "atmel,at91sam9260-usart";
+	reg = <0xf8028000 0x200>;
+	interrupts = <8 4 5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart3
+		     /* &pinctrl_usart3_rts */
+		     /* &pinctrl_usart3_cts */
+		    >;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	num-ports = <3>;
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-ariettag25.dts b/arch/arm/boot/dts/microchip/at91-ariettag25.dts
new file mode 100644
index 000000000000..2c52a71752c2
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-ariettag25.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Arietta G25
+ * This device tree is minimal, to activate more peripherals, see:
+ * http://dts.acmesystems.it/arietta/
+ */
+/dts-v1/;
+#include "at91sam9g25.dtsi"
+
+/ {
+	model = "Acme Systems Arietta G25";
+	compatible = "acme,ariettag25", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		arietta_led {
+			label = "arietta_led";
+			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-0 = <
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	num-ports = <3>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-cosino.dtsi b/arch/arm/boot/dts/microchip/at91-cosino.dtsi
new file mode 100644
index 000000000000..ee0f5da6d819
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-cosino.dtsi
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-cosino.dtsi - Device Tree file for Cosino core module
+ *
+ * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
+ *			HCE Engineering
+ *
+ * Derived from at91sam9x5ek.dtsi by:
+ *	Copyright (C) 2012 Atmel,
+ *	2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+#include "at91sam9g35.dtsi"
+
+/ {
+	model = "HCE Cosino core module";
+	compatible = "hce,cosino", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+};
+
+&adc0 {
+	atmel,adc-ts-wires = <4>;
+	atmel,adc-ts-pressure-threshold = <10000>;
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_addr_nand
+		     &pinctrl_ebi_data_0_7>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	nand-controller {
+		pinctrl-0 = <&pinctrl_nand_oe_we
+			     &pinctrl_nand_cs
+			     &pinctrl_nand_rb>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <4>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				uboot@40000 {
+					label = "u-boot";
+					reg = <0x40000 0x80000>;
+				};
+
+				ubootenv@c0000 {
+					label = "U-Boot Env";
+					reg = <0xc0000 0x140000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x0f800000>;
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-0 = <
+		&pinctrl_board_mmc0
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl {
+	mmc0 {
+		pinctrl_board_mmc0: mmc0-board {
+			atmel,pins =
+				<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
+		};
+	};
+};
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usart0 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-cosino_mega2560.dts b/arch/arm/boot/dts/microchip/at91-cosino_mega2560.dts
new file mode 100644
index 000000000000..04cb7bee937d
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-cosino_mega2560.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-cosino_mega2560.dts - Device Tree file for Cosino board with
+ *			      Mega 2560 extension
+ *
+ * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
+ *			HCE Engineering
+ *
+ * Derived from at91sam9g35ek.dts by:
+ * 	Copyright (C) 2012 Atmel,
+ *      2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+/dts-v1/;
+#include "at91-cosino.dtsi"
+
+/ {
+	model = "HCE Cosino Mega 2560";
+	compatible = "hce,cosino_mega2560", "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&adc0 {
+	atmel,adc-ts-wires = <4>;
+	atmel,adc-ts-pressure-threshold = <10000>;
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-0 = <
+		&pinctrl_mmc1_slot0_clk_cmd_dat0
+		&pinctrl_mmc1_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		non-removable;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&usart1 {
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */
+			   &pioD 19 GPIO_ACTIVE_LOW
+			   &pioD 20 GPIO_ACTIVE_LOW
+			  >;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-dvk_som60.dts b/arch/arm/boot/dts/microchip/at91-dvk_som60.dts
new file mode 100644
index 000000000000..ededd5b0d27b
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-dvk_som60.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-dvk_som60.dts - Device Tree file for the DVK SOM60 board
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+/dts-v1/;
+#include "at91-som60.dtsi"
+#include "at91-dvk_su60_somc.dtsi"
+#include "at91-dvk_su60_somc_lcm.dtsi"
+
+/ {
+	model = "Laird DVK SOM60";
+	compatible = "laird,dvk-som60", "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = &dbgu;
+		tick-timer = &pit;
+	};
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&ssc0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&usart1 {
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&pit {
+	status = "okay";
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&macb0 {
+	status = "okay";
+};
+
+&macb1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/microchip/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/microchip/at91-dvk_su60_somc.dtsi
new file mode 100644
index 000000000000..3542ad8a243e
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-dvk_su60_somc.dtsi
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-dvk_su60_somc.dtsi - Device Tree file for the DVK SOM60 base board
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+
+/ {
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck2_as_audio_mck>;
+
+		atmel,model = "wm8904 @ DVK-SOM60";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+
+		status = "okay";
+	};
+};
+
+&mmc0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+	slot@0 {
+		bus-width = <4>;
+		cd-gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
+		cd-inverted;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Macronix MX25R4035FM1IL0 */
+	flash@0 {
+		compatible = "mxicy,mx25u4035", "jedec,spi-nor";
+		spi-max-frequency = <33000000>;
+		reg = <0>;
+	};
+};
+
+&ssc0 {
+	atmel,clk-from-rk-pin;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	wm8904: wm8904@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		clocks = <&pmc PMC_TYPE_SYSTEM 10>;
+		clock-names = "mclk";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom@57 {
+		compatible = "giantec,gt24c32a", "atmel,24c32";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+};
+
+&usart1 {
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&pit {
+	status = "okay";
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&macb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ethernet-phy@7 {
+		reg = <7>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_geth_int>;
+		interrupt-parent = <&pioB>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		txen-skew-ps = <800>;
+		txc-skew-ps = <3000>;
+		rxdv-skew-ps = <400>;
+		rxc-skew-ps = <3000>;
+		rxd0-skew-ps = <400>;
+		rxd1-skew-ps = <400>;
+		rxd2-skew-ps = <400>;
+		rxd3-skew-ps = <400>;
+	};
+};
+
+&macb1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ethernet-phy@1 {
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eth_int>;
+		interrupt-parent = <&pioC>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/microchip/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/microchip/at91-dvk_su60_somc_lcm.dtsi
new file mode 100644
index 000000000000..bea920b192b6
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-dvk_su60_somc_lcm.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-dvk_su60_somc_lcm.dtsi - Device Tree file for the DVK SOM60 LCD board
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	panel: panel {
+		compatible = "winstar,wf70gtiagdng0", "innolux,at070tn92";
+		backlight = <&backlight>;
+		power-supply = <&vcc_lcd_reg>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	vcc_lcd_reg: fixedregulator_lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC LCM";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		status = "okay";
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_lcd_ctp_int: lcd_ctp_int {
+			 atmel,pins =
+				 <AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	ft5426@38 {
+		compatible = "focaltech,ft5426", "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_ctp_int>;
+
+		interrupt-parent = <&pioC>;
+		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&hlcdc {
+	status = "okay";
+
+	hlcdc-display-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+		port@0 {
+			hlcdc_panel_output: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_input>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/microchip/at91-foxg20.dts
index 50d5e719b451..8e9e87665045 100644
--- a/arch/arm/boot/dts/at91-foxg20.dts
+++ b/arch/arm/boot/dts/microchip/at91-foxg20.dts
@@ -1,11 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91-foxg20.dts - Device Tree file for Acme Systems FoxG20 board
  *
  * Based on DT files for at91sam9g20ek evaluation board (AT91SAM9G20 SoC)
  *
  * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>
- *
- * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "at91sam9g20.dtsi"
@@ -18,7 +17,7 @@
 		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x4000000>;
 	};
 
@@ -34,6 +33,18 @@
 
 	ahb {
 		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			usb1: gadget@fffa4000 {
 				atmel,vbus-gpio = <&pioC 6 GPIO_ACTIVE_HIGH>;
 				status = "okay";
@@ -44,6 +55,7 @@
 					&pinctrl_mmc0_clk
 					&pinctrl_mmc0_slot1_cmd_dat0
 					&pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
 				status = "okay";
 
 				slot@1 {
@@ -119,7 +131,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
@@ -143,10 +155,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		btn {
+		button {
 			label = "Button";
 			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
diff --git a/arch/arm/boot/dts/microchip/at91-gatwick.dts b/arch/arm/boot/dts/microchip/at91-gatwick.dts
new file mode 100644
index 000000000000..551300fd7746
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-gatwick.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-gatwick.dts - Device Tree file for the Gatwick board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+/dts-v1/;
+#include "at91-wb50n.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Laird Workgroup Bridge 50N - Project Gatwick";
+	compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_SETUP>;
+			gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-ethernet {
+			label = "gatwick:yellow:ethernet";
+			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-wifi {
+			label = "gatwick:green:wifi";
+			gpios = <&pioA 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-ble {
+			label = "gatwick:blue:ble";
+			gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-lora {
+			label = "gatwick:orange:lora";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-blank {
+			label = "gatwick:green:blank";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-user {
+			label = "gatwick:yellow:user";
+			gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_key_gpio: key_gpio_0 {
+		  atmel,pins =
+			  <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pullup deglitch */
+	  };
+	};
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&macb1 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+/* FTDI USART */
+&usart0 {
+	status = "okay";
+};
+
+/* GPS USART */
+&usart1 {
+	pinctrl-0 = <&pinctrl_usart1>;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	spidev@0 {
+		compatible = "semtech,sx1301";
+		reg = <0>;
+		spi-max-frequency = <8000000>;
+	};
+};
+
+&usb1 {
+	status = "okay";
+	/delete-property/atmel,oc-gpio;
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-kizbox.dts b/arch/arm/boot/dts/microchip/at91-kizbox.dts
new file mode 100644
index 000000000000..307663b4eec2
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-kizbox.dts
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board
+ *
+ * Copyright (C) 2012-2014 Boris BREZILLON <b.brezillon@overkiz.com>
+ *               2014-2015 Gaël PORTAY <g.portay@overkiz.com>
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Overkiz Kizbox";
+	compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		stdout-path = &dbgu;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x2000000>;
+	};
+
+	clocks {
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			label = "PB_RST";
+			gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+
+		button-user {
+			label = "PB_USER";
+			gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x101>;
+			wakeup-source;
+		};
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+
+		led-1 {
+			label = "pwm:green:network";
+			pwms = <&tcb1_pwm1 0 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			label = "pwm:red:network";
+			pwms = <&tcb1_pwm2 0 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-3 {
+			label = "pwm:green:user";
+			pwms = <&tcb1_pwm0 0 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-4 {
+			label = "pwm:red:user";
+			pwms = <&tcb1_pwm0 1 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>, <1>;
+	};
+
+	timer@2 {
+		compatible = "atmel,tcb-timer";
+		reg = <2>;
+	};
+};
+
+&tcb1 {
+	tcb1_pwm0: pwm@0 {
+		compatible = "atmel,tcb-pwm";
+		reg = <0>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tcb1_tioa0 &pinctrl_tcb1_tiob0>;
+	};
+
+	tcb1_pwm1: pwm@1 {
+		compatible = "atmel,tcb-pwm";
+		reg = <1>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tcb1_tioa1>;
+	};
+
+	tcb1_pwm2: pwm@2 {
+		compatible = "atmel,tcb-pwm";
+		reg = <2>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tcb1_tioa2>;
+	};
+};
+
+&ebi {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+	pinctrl-names = "default";
+
+	nand@3 {
+		reg = <0x3 0x0 0x800000>;
+		rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "soft";
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "mii";
+	pinctrl-0 = <&pinctrl_macb_rmii
+		     &pinctrl_macb_rmii_mii_alt>;
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&watchdog {
+	timeout-sec = <15>;
+	atmel,max-heartbeat-sec = <16>;
+	atmel,min-heartbeat-sec = <0>;
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <1>;
+	status = "okay";
+};
+
+&i2c_gpio0 {
+	status = "okay";
+
+	rtc: pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-kizbox2-2.dts b/arch/arm/boot/dts/microchip/at91-kizbox2-2.dts
new file mode 100644
index 000000000000..cab8b3579efa
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-kizbox2-2.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox2-2.dts - Device Tree file for the Kizbox2 with
+ * two head board
+ *
+ * Copyright (C) 2015 Overkiz SAS
+ *
+ * Authors: Antoine Aubert <a.aubert@overkiz.com>
+ *	    Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizbox2-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox 2 with two heads";
+	compatible = "overkiz,kizbox2-2", "atmel,sama5d31",
+		     "atmel,sama5d3", "atmel,sama5";
+};
+
+&usart1 {
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi
new file mode 100644
index 000000000000..a44d92305dbb
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox2_common.dtsi - Device Tree Include file for
+ * Overkiz Kizbox 2 family SoC
+ *
+ * Copyright (C) 2014-2018 Overkiz SAS
+ *
+ * Authors: Antoine Aubert <a.aubert@overkiz.com>
+ *          Gaël Portay <g.portay@overkiz.com>
+ *          Kévin Raymond <k.raymond@overkiz.com>
+ */
+#include "sama5d31.dtsi"
+
+/ {
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		stdout-path = &dbgu;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-prog {
+			label = "PB_PROG";
+			gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
+			linux,code = <0x102>;
+			wakeup-source;
+		};
+
+		button-reset {
+			label = "PB_RST";
+			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+
+		button-user {
+			label = "PB_USER";
+			gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x101>;
+			wakeup-source;
+		};
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+
+		led-1 {
+			label = "pwm:blue:user";
+			pwms = <&pwm0 2 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "none";
+		};
+
+		led-2 {
+			label = "pwm:green:user";
+			pwms = <&pwm0 1 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-3 {
+			label = "pwm:red:user";
+			pwms = <&pwm0 0 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	act8865: pmic@5b {
+		compatible = "active-semi,act8865";
+		reg = <0x5b>;
+		status = "okay";
+
+		regulators {
+			vcc_1v8_reg: DCDC_REG1 {
+				regulator-name = "VCC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc_1v2_reg: DCDC_REG2 {
+				regulator-name = "VCC_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_3v3_reg: DCDC_REG3 {
+				regulator-name = "VCC_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vddfuse_reg: LDO_REG1 {
+				regulator-name = "FUSE_2V5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			vddana_reg: LDO_REG2 {
+				regulator-name = "VDDANA";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vled_reg: LDO_REG3 {
+				regulator-name = "VLED";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			v3v8_rf_reg: LDO_REG4 {
+				regulator-name = "V3V8_RF";
+				regulator-min-microvolt = <3800000>;
+				regulator-max-microvolt = <3800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&usart1 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&usart2 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_pwmh0_1
+		     &pinctrl_pwm0_pwmh1_1
+		     &pinctrl_pwm0_pwmh2_0>;
+	status = "okay";
+};
+
+&adc0 {
+	atmel,adc-vref = <3333>;
+	status = "okay";
+};
+
+&macb1 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+/* WMBUS (inverted with IO in the latest schematic) */
+&pinctrl_usart0 {
+	atmel,pins =
+		<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+		 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+		 AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
+
+/* RTS */
+&pinctrl_usart1 {
+	atmel,pins =
+		<AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE
+		 AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+		 AT91_PIOE 7 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
+
+/* IO (inverted with WMBUS in the latest schematic) */
+&pinctrl_usart2 {
+	atmel,pins =
+		<AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE
+		 AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
+		 AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
diff --git a/arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts b/arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts
new file mode 100644
index 000000000000..fec7269088d1
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox3-hs.dts - Device Tree file for Overkiz KIZBOX3-HS board
+ *
+ * Copyright (C) 2018 Overkiz SAS
+ *
+ * Authors: Dorian Rocipon <d.rocipon@overkiz.com>
+ *          Kevin Carli <k.carli@overkiz.com>
+ *          Mickael Gardet <m.gardet@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizbox3_common.dtsi"
+
+/ {
+	model = "Overkiz KIZBOX3-HS";
+	compatible = "overkiz,kizbox3-hs", "atmel,sama5d2", "atmel,sama5";
+
+	led-controller-1 {
+		status = "okay";
+
+		led-1 {
+			status = "okay";
+		};
+
+		led-2 {
+			status = "okay";
+		};
+
+		led-3 {
+			status = "okay";
+		};
+
+		led-4 {
+			status = "okay";
+		};
+	};
+
+	led-controller-2  {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_red
+			     &pinctrl_led_white>;
+		status = "okay";
+
+		led-5 {
+			label = "pio:red:user";
+			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-6 {
+			label = "pio:white:user";
+			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default" , "default", "default",
+				"default", "default" ;
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+		pinctrl-1 = <&pinctrl_pio_rf &pinctrl_pio_wifi>;
+		pinctrl-2 = <&pinctrl_pio_io_boot
+			     &pinctrl_pio_io_reset
+			     &pinctrl_pio_io_test_radio>;
+		pinctrl-3 = <&pinctrl_pio_zbe_test_radio
+			     &pinctrl_pio_zbe_rst>;
+		pinctrl-4 = <&pinctrl_pio_input>;
+
+		switch-1 {
+			label = "SW1";
+			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x101>;
+			wakeup-source;
+		};
+
+		switch-2 {
+			label = "SW2";
+			gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>;
+			linux,code = <0x102>;
+			wakeup-source;
+		};
+
+		switch-3 {
+			label = "SW3";
+			gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			wakeup-source;
+		};
+
+		switch-7 {
+			label = "SW7";
+			gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>;
+			linux,code = <0x107>;
+			wakeup-source;
+		};
+
+		switch-8 {
+			label = "SW8";
+			gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>;
+			linux,code = <0x108>;
+			wakeup-source;
+		};
+	};
+
+	gpios {
+		compatible = "gpio";
+		status = "okay";
+
+		rf_on {
+			label = "rf on";
+			gpio = <&pioA PIN_PC19 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		wifi_on {
+			label = "wifi on";
+			gpio = <&pioA PIN_PC20 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		zbe_test_radio {
+			label = "zbe test radio";
+			gpio = <&pioA PIN_PB21 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		zbe_rst {
+			label = "zbe rst";
+			gpio = <&pioA PIN_PB25 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		io_reset {
+			label = "io reset";
+			gpio = <&pioA PIN_PB30 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		io_test_radio {
+			label = "io test radio";
+			gpio = <&pioA PIN_PC9 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		io_boot_0 {
+			label = "io boot 0";
+			gpio = <&pioA PIN_PC11 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		io_boot_1 {
+			label = "io boot 1";
+			gpio = <&pioA PIN_PC17 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		verbose_bootloader {
+			label = "verbose bootloader";
+			gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
+			input;
+		};
+
+		 nail_bed_detection  {
+			label = "nail bed detection";
+			gpio = <&pioA PIN_PB12 GPIO_ACTIVE_HIGH>;
+			input;
+		};
+
+		 id_usba {
+			label = "id usba";
+			gpio = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>;
+			input;
+		};
+	};
+};
+
+&pioA {
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PA22__GPIO>,
+		<PIN_PA24__GPIO>,
+		<PIN_PA26__GPIO>,
+		<PIN_PA29__GPIO>,
+		<PIN_PA18__GPIO>;
+		bias-disable;
+		};
+
+	pinctrl_gpio {
+		pinctrl_pio_rf: gpio_rf {
+			pinmux = <PIN_PC19__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_wifi: gpio_wifi {
+			pinmux = <PIN_PC20__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_io_boot: gpio_io_boot {
+			pinmux =
+			<PIN_PC11__GPIO>,
+			<PIN_PC17__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_io_test_radio: gpio_io_test_radio {
+			pinmux = <PIN_PC9__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_zbe_test_radio: gpio_zbe_test_radio {
+			pinmux = <PIN_PB21__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_zbe_rst: gpio_zbe_rst {
+			pinmux = <PIN_PB25__GPIO>;
+			bias-disable;
+		};
+		/* stm32 reset must be open drain (internal pull up) */
+		pinctrl_pio_io_reset: gpio_io_reset {
+			pinmux = <PIN_PB30__GPIO>;
+			bias-disable;
+			drive-open-drain;
+			output-low;
+		};
+		pinctrl_pio_input: gpio_input {
+			pinmux =
+			<PIN_PB11__GPIO>,
+			<PIN_PB12__GPIO>,
+			<PIN_PC0__GPIO>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_leds {
+		pinctrl_led_red: led_red {
+			pinmux = <PIN_PB1__GPIO>;
+			bias-disable;
+		};
+		pinctrl_led_white: led_white {
+			pinmux = <PIN_PB8__GPIO>;
+			bias-disable;
+		};
+	};
+};
+
+&adc {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&flx0 {
+	status = "okay";
+
+	uart5: serial@200  {
+			status = "okay";
+	};
+};
+
+&flx3 {
+	status = "okay";
+	uart8: serial@200 {
+		status = "okay";
+	};
+};
+
+&flx4 {
+	status = "okay";
+
+	i2c6: i2c@600 {
+		status = "okay";
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/microchip/at91-kizbox3_common.dtsi
new file mode 100644
index 000000000000..465664628419
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-kizbox3_common.dtsi
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox3.dts - Device Tree Include file for Overkiz Kizbox 3
+ * family SoC boards
+ *
+ * Copyright (C) 2018 Overkiz SAS
+ *
+ * Authors: Dorian Rocipon <d.rocipon@overkiz.com>
+ *          Kevin Carli <k.carli@overkiz.com>
+ *          Mickael Gardet <m.gardet@overkiz.com>
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Overkiz Kizbox3";
+	compatible = "overkiz,kizbox3", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart8;
+	};
+
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		stdout-path = "serial1:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	vdd_adc_vddana: supply_3v3_ana {
+		compatible = "regulator-fixed";
+		regulator-name = "adc-vddana";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_adc_vref: supply_3v3_ref {
+		compatible = "regulator-fixed";
+		regulator-name = "adc-vref";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	led-controller-1 {
+		compatible = "pwm-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwm0_pwm_h0
+			     &pinctrl_pwm0_pwm_h1
+			     &pinctrl_pwm0_pwm_h2
+			     &pinctrl_pwm0_pwm_h3>;
+		status = "disabled";
+
+		led-1 {
+			label = "pwm:red:user";
+			pwms = <&pwm0 0 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+			status = "disabled";
+		};
+
+		led-2 {
+			label = "pwm:green:user";
+			pwms = <&pwm0 1 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+			status = "disabled";
+		};
+
+		led-3 {
+			label = "pwm:blue:user";
+			pwms = <&pwm0 2 10000000 0>;
+			max-brightness = <255>;
+			status = "disabled";
+		};
+
+		led-4 {
+			label = "pwm:white:user";
+			pwms = <&pwm0 3 10000000 0>;
+			max-brightness = <255>;
+			status = "disabled";
+		};
+	};
+};
+
+&ebi {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@3 {
+		pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+		pinctrl-names = "default";
+		reg = <0x3 0x0 0x800000>;
+
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			u-boot@20000 {
+				label = "u-boot";
+				reg = <0x20000 0x140000>;
+			};
+
+			u-boot-factory@160000 {
+				label = "u-boot-factory";
+				reg = <0x160000 0x140000>;
+			};
+
+			ubi@2A0000 {
+				label = "ubi";
+				reg = <0x2A0000 0x7D60000>;
+			};
+		};
+
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&pioA {
+	pinctrl_ebi_nand_addr: ebi-addr-1 {
+		pinmux = <PIN_PA0__D0>,
+			<PIN_PA1__D1>,
+			<PIN_PA2__D2>,
+			<PIN_PA3__D3>,
+			<PIN_PA4__D4>,
+			<PIN_PA5__D5>,
+			<PIN_PA6__D6>,
+			<PIN_PA7__D7>,
+			<PIN_PA8__NWE_NANDWE>,
+			<PIN_PA9__NCS3>,
+			<PIN_PA10__A21_NANDALE>,
+			<PIN_PA11__A22_NANDCLE>,
+			<PIN_PA21__NANDRDY>;
+		bias-disable;
+	};
+
+	pinctrl_usart {
+		pinctrl_usart_0: usart0-0 {
+			pinmux = < PIN_PB26__URXD0>, <PIN_PB27__UTXD0>;
+			bias-disable;
+		};
+		pinctrl_usart_1: usart1-0 {
+			pinmux = < PIN_PD2__URXD1>, <PIN_PD3__UTXD1>;
+			bias-disable;
+		};
+		pinctrl_usart_2: usart2-0 {
+			pinmux = < PIN_PD4__URXD2>, <PIN_PD5__UTXD2>;
+			bias-disable;
+		};
+		pinctrl_usart_3: usart3-0 {
+			pinmux = < PIN_PC12__URXD3>, <PIN_PC13__UTXD3>;
+			bias-disable;
+		};
+		pinctrl_usart_4: usart4-0 {
+			pinmux = < PIN_PB3__URXD4>, <PIN_PB4__UTXD4>;
+			bias-disable;
+		};
+		pinctrl_flx0_default: flx0_usart_default {
+			pinmux = <PIN_PB28__FLEXCOM0_IO0>, //TX
+			<PIN_PB29__FLEXCOM0_IO1>; //RX
+			bias-disable;
+		};
+		pinctrl_flx3_default: flx3_usart_default {
+			pinmux = <PIN_PB22__FLEXCOM3_IO1>, //RX
+			<PIN_PB23__FLEXCOM3_IO0>; //TX
+			bias-disable;
+		};
+	};
+
+	pinctrl_flx4_default: flx4_i2c6_default {
+		pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA
+		<PIN_PD13__FLEXCOM4_IO1>; //CLK
+		bias-disable;
+		drive-open-drain;
+	};
+
+	pinctrl_pwm0 {
+		pinctrl_pwm0_pwm_h0: pwm0_pwm_h0 {
+			pinmux = <PIN_PA30__PWMH0>;
+			bias-disable;
+		};
+		pinctrl_pwm0_pwm_h1: pwm0_pwmh1 {
+			pinmux = <PIN_PB0__PWMH1>;
+			bias-disable;
+		};
+		pinctrl_pwm0_pwm_h2: pwm0_pwm_h2 {
+			pinmux = <PIN_PB5__PWMH2>;
+			bias-disable;
+		};
+		pinctrl_pwm0_pwm_h3: pwm0_pwm_h3 {
+			pinmux = <PIN_PB7__PWMH3>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_adc {
+		pinctrl_adc2: adc2 {
+			pinmux = <PIN_PD21__GPIO>;
+			bias-disable;
+		};
+		pinctrl_adc3: adc3 {
+			pinmux = <PIN_PD22__GPIO>;
+			bias-disable;
+		};
+		pinctrl_adc4: adc4 {
+			pinmux = <PIN_PD23__GPIO>;
+			bias-disable;
+		};
+		pinctrl_adc5: adc5 {
+			pinmux = <PIN_PD24__GPIO>;
+			bias-disable;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_0>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+/* debug uart */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_1>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_2>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_3>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_4>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "disabled";
+
+	uart5: serial@200  {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "disabled";
+	};
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "disabled";
+
+	uart8: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx3_default>;
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "disabled";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "disabled";
+
+	i2c6: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		status = "disabled";
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc2
+		     &pinctrl_adc3
+		     &pinctrl_adc4
+		     &pinctrl_adc5>;
+
+	vddana-supply = <&vdd_adc_vddana>;
+	vref-supply = <&vdd_adc_vref>;
+	status = "disabled";
+};
+
+&securam {
+	export;
+
+	/* export overkiz u-boot mode/version and factory */
+	uboot@1400 {
+		reg = <0x1400 0x20>;
+		export;
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-kizboxmini-base.dts b/arch/arm/boot/dts/microchip/at91-kizboxmini-base.dts
new file mode 100644
index 000000000000..81c29ca5cc1b
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-kizboxmini-base.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-kizboxmini-base.dts - Device Tree file for Overkiz Kizbox mini
+ * base board
+ *
+ * Copyright (C) 2015 Overkiz SAS
+ *   Author: Antoine Aubert <a.aubert@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox Mini";
+	compatible = "overkiz,kizboxmini-base", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&pinctrl_usart0 {
+	atmel,pins =
+		<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+		 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+		 AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
diff --git a/arch/arm/boot/dts/microchip/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/microchip/at91-kizboxmini-common.dtsi
new file mode 100644
index 000000000000..42640fe6b6d0
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-kizboxmini-common.dtsi
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
+ *
+ * Copyright (C) 2014-2018 Overkiz SAS
+ *   Author: Antoine Aubert <a.aubert@overkiz.com>
+ *           Gaël Portay <g.portay@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ *           Dorian Rocipon <d.rocipon@overkiz.com>
+ */
+#include "at91sam9g25.dtsi"
+
+/ {
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		stdout-path = &dbgu;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		adc_op_clk {
+			status = "disabled";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		key-prog {
+			label = "PB_PROG";
+			gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
+			linux,code = <0x102>;
+			wakeup-source;
+		};
+
+		key-reset {
+			label = "PB_RST";
+			gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+
+	leds: led-controller-1 {
+		compatible = "pwm-leds";
+
+		led_blue: led-1 {
+			label = "pwm:blue:user";
+			pwms = <&pwm0 2 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "none";
+			status = "disabled";
+		};
+
+		led_green: led-2 {
+			label = "pwm:green:user";
+			pwms = <&pwm0 0 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		led_red: led-3 {
+			label = "pwm:red:user";
+			pwms = <&pwm0 1 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_pwm0_1
+		     &pinctrl_pwm0_pwm1_1
+		     &pinctrl_pwm0_pwm2_1>;
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&adc0 {
+	status = "disabled";
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_addr_nand
+			&pinctrl_ebi_data_0_7>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_nand_oe_we
+		     &pinctrl_nand_cs
+		     &pinctrl_nand_rb>;
+	pinctrl-names = "default";
+
+	nand@3 {
+		reg = <0x3 0x0 0x800000>;
+		rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	num-ports = <1>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/microchip/at91-kizboxmini-mb.dts b/arch/arm/boot/dts/microchip/at91-kizboxmini-mb.dts
new file mode 100644
index 000000000000..c07d3076a9bc
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-kizboxmini-mb.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015-2018 Overkiz SAS
+ *   Author: Mickael Gardet <m.gardet@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox Mini Mother Board";
+	compatible = "overkiz,kizboxmini-mb", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&usb0 {
+	num-ports = <2>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&led_blue {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-kizboxmini-rd.dts b/arch/arm/boot/dts/microchip/at91-kizboxmini-rd.dts
new file mode 100644
index 000000000000..ab50f4d22387
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-kizboxmini-rd.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015-2018 Overkiz SAS
+ *   Author: Mickael Gardet <m.gardet@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox Mini RailDIN";
+	compatible = "overkiz,kizboxmini-rd", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+
+	clocks {
+		adc_op_clk {
+			status = "okay";
+		};
+	};
+};
+
+&pinctrl {
+	adc0 {
+		pinctrl_adc0_ad5: adc0_ad5-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&usart0 {
+	status = "disabled";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&led_blue {
+	status = "okay";
+};
+
+&adc0 {
+	atmel,adc-vref = <2500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_ad5>;
+	atmel,adc-channels-used = <0x0020>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-linea.dtsi b/arch/arm/boot/dts/microchip/at91-linea.dtsi
index 87e5090fb4c4..533a440d5583 100644
--- a/arch/arm/boot/dts/at91-linea.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-linea.dtsi
@@ -1,11 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91-linea.dtsi - Device Tree Include file for the Axentia Linea Module.
  *
  * Copyright (C) 2017 Axentia Technologies AB
  *
  * Author: Peter Rosin <peda@axentia.se>
- *
- * Licensed under GPLv2 or later.
  */
 
 #include "sama5d31.dtsi"
@@ -14,7 +13,7 @@
 	compatible = "axentia,linea",
 		     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x4000000>;
 	};
 };
@@ -27,6 +26,18 @@
 	clock-frequency = <12000000>;
 };
 
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/microchip/at91-lmu5000.dts b/arch/arm/boot/dts/microchip/at91-lmu5000.dts
new file mode 100644
index 000000000000..f8863d7c0798
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-lmu5000.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree file for CalAmp LMU5000 board
+ *
+ * Copyright (C) 2013 Adam Porter <porter.adam@gmail.com>
+ */
+
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+
+/ {
+	model = "CalAmp LMU5000";
+	compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <18432000>;
+		};
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	status = "okay";
+
+	nand_controller: nand-controller {
+		pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+			status = "okay";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				kernel@0 {
+					label = "kernel";
+					reg = <0x0 0x400000>;
+				};
+
+				rootfs@400000 {
+					label = "rootfs";
+					reg = <0x400000 0x3C00000>;
+				};
+
+				user1@4000000 {
+					label = "user1";
+					reg = <0x4000000 0x2000000>;
+				};
+
+				user2@6000000 {
+					label = "user2";
+					reg = <0x6000000 0x2000000>;
+				};
+			};
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&pinctrl {
+	board {
+		pinctrl_pck0_as_mck: pck0_as_mck {
+			atmel,pins = <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	usb0 {
+		pinctrl_usb1_vbus_gpio: usb0_vbus_gpio {
+			atmel,pins = <AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&ssc0 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_ssc0_tx>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usart0 {
+	pinctrl-0 =
+		<&pinctrl_usart0
+		 &pinctrl_usart0_rts
+		 &pinctrl_usart0_cts
+		 &pinctrl_usart0_dtr_dsr
+		 &pinctrl_usart0_dcd
+		 &pinctrl_usart0_ri>;
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <2>;
+	status = "okay";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
+	atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-natte.dtsi b/arch/arm/boot/dts/microchip/at91-natte.dtsi
new file mode 100644
index 000000000000..49f0a0c46cde
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-natte.dtsi
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * at91-natte.dts - Device Tree include file for the Natte board
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+
+/ {
+	mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&ioexp 0 GPIO_ACTIVE_HIGH>,
+			    <&ioexp 1 GPIO_ACTIVE_HIGH>,
+			    <&ioexp 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	batntc-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 5>;
+		io-channel-names = "parent";
+		mux-controls = <&mux>;
+
+		channels =
+			"batntc0", "batntc1", "batntc2", "batntc3",
+			"batntc4", "batntc5", "batntc6", "batntc7";
+	};
+
+	batv-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 6>;
+		io-channel-names = "parent";
+		mux-controls = <&mux>;
+
+		channels =
+			"batv0", "batv1", "batv2", "batv3",
+			"batv4", "batv5", "batv6", "batv7";
+	};
+
+	iout-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 7>;
+		io-channel-names = "parent";
+		mux-controls = <&mux>;
+
+		channels =
+			"iout0", "iout1", "iout2", "iout3",
+			"iout4", "iout5", "iout6", "iout7";
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux";
+		mux-locked;
+		i2c-parent = <&i2c0>;
+		mux-controls = <&mux>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	ioexp: ioexp@20 {
+		#gpio-cells = <2>;
+		compatible = "semtech,sx1502q";
+		reg = <0x20>;
+
+		gpio-controller;
+		ngpios = <8>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio3_cfg_pins>;
+
+		gpio3_cfg_pins: gpio3_cfg {
+			pins = "gpio3";
+			bias-pull-up;
+		};
+	};
+
+	adc: adc@48 {
+		compatible = "ti,ads1015";
+		reg = <0x48>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <2>;
+			ti,datarate = <4>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			ti,gain = <2>;
+			ti,datarate = <4>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <1>;
+			ti,datarate = <4>;
+		};
+
+		channel@7 {
+			reg = <7>;
+			ti,gain = <3>;
+			ti,datarate = <4>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/microchip/at91-nattis-2-natte-2.dts
new file mode 100644
index 000000000000..f71377c9b757
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-nattis-2-natte-2.dts
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * at91-nattis-2-natte-2.dts - Device Tree file for the Linea/Nattis board
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+/dts-v1/;
+#include "at91-linea.dtsi"
+#include "at91-natte.dtsi"
+
+/ {
+	model = "Axentia Linea-Nattis v2 Natte v2";
+	compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea",
+		     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-wakeup {
+			label = "Wakeup";
+			linux,code = <10>;
+			wakeup-source;
+			gpios = <&pioB 27 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	panel_reg: panel-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-VCC";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	bl_reg: backlight-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-VDD";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	panel_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 100000 0>;
+
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <40>;
+
+		power-supply = <&bl_reg>;
+		enable-gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_blon>;
+	};
+
+	panel: panel {
+		compatible = "sharp,lq150x1lg11", "panel-lvds";
+
+		backlight = <&panel_bl>;
+		power-supply = <&panel_reg>;
+
+		width-mm = <304>;
+		height-mm = <228>;
+
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			// 1024x768 @ 60Hz (typical)
+			clock-frequency = <50000000 65000000 80000000>;
+			hactive = <1024>;
+			vactive = <768>;
+			hfront-porch = <48 88 88>;
+			hback-porch = <96 168 168>;
+			hsync-len = <32 64 64>;
+			vsync-len = <3 13 74>;
+			vfront-porch = <3 13 74>;
+			vback-porch = <3 12 74>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	lvds-encoder {
+		compatible = "ti,ds90c185", "lvds-encoder";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds_prlud0 &pinctrl_lvds_hipow0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&hlcdc_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "nattis-tfa9879";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&cpu_dai>;
+		simple-audio-card,frame-master = <&cpu_dai>;
+		simple-audio-card,widgets = "Line", "Line Out Jack";
+		simple-audio-card,routing = "Line Out Jack", "LINEOUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&ssc0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&amp>;
+		};
+	};
+};
+
+&pinctrl {
+	nattis {
+		pinctrl_usba_vbus: usba_vbus {
+			atmel,pins = <AT91_PIOD 28 AT91_PERIPH_GPIO
+				      AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_mmc0_cd: mmc0_cd {
+			atmel,pins = <AT91_PIOD  5 AT91_PERIPH_GPIO
+				      AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		pinctrl_lvds_prlud0: lvds_prlud0 {
+			atmel,pins = <AT91_PIOA 21 AT91_PERIPH_GPIO
+				      (AT91_PINCTRL_OUTPUT |
+				       AT91_PINCTRL_OUTPUT_VAL(0))>;
+		};
+
+		pinctrl_lvds_hipow0: lvds_hipow0 {
+			atmel,pins = <AT91_PIOA 23 AT91_PERIPH_GPIO
+				      (AT91_PINCTRL_OUTPUT |
+				       AT91_PINCTRL_OUTPUT_VAL(0))>;
+		};
+
+		pinctrl_blon: blon {
+			atmel,pins = <AT91_PIOA 20 AT91_PERIPH_GPIO
+				      (AT91_PINCTRL_OUTPUT |
+				       AT91_PINCTRL_OUTPUT_VAL(0))>;
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	temp@18 {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x18>;
+		smbus-timeout-disable;
+	};
+
+	eeprom@50 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	amp: amplifier@6c {
+		 compatible = "nxp,tfa9879";
+		 reg = <0x6c>;
+		 #sound-dai-cells = <0>;
+	};
+};
+
+&ssc0 {
+	status = "okay";
+
+	atmel,clk-from-rk-pin;
+	#sound-dai-cells = <0>;
+};
+
+&hlcdc {
+	status = "okay";
+
+	hlcdc-display-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
+
+		port@0 {
+			hlcdc_output: endpoint {
+				remote-endpoint = <&lvds_encoder_input>;
+				bus-width = <16>;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0
+		     &pinctrl_mmc0_dat1_3
+		     &pinctrl_mmc0_cd>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+		cd-inverted;
+	};
+};
+
+&usart0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart0>;
+	atmel,use-dma-rx;
+};
+
+&nand {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		at91bootstrap@0 {
+			label = "at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		barebox@40000 {
+			label = "barebox";
+			reg = <0x40000 0x60000>;
+		};
+
+		bareboxenv@c0000 {
+			label = "bareboxenv";
+			reg = <0xc0000 0x40000>;
+		};
+
+		bareboxenv2@100000 {
+			label = "bareboxenv2";
+			reg = <0x100000 0x40000>;
+		};
+
+		oftree@180000 {
+			label = "oftree";
+			reg = <0x180000 0x20000>;
+		};
+
+		kernel@200000 {
+			label = "kernel";
+			reg = <0x200000 0x500000>;
+		};
+
+		rootfs@800000 {
+			label = "rootfs";
+			reg = <0x800000 0x1f800000>;
+		};
+	};
+};
+
+&dbgu {
+	status = "okay";
+
+	atmel,use-dma-rx;
+};
+
+&usb0 {
+	status = "okay";
+
+	atmel,vbus-gpio = <&pioD 28 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+};
diff --git a/arch/arm/boot/dts/microchip/at91-q5xr5.dts b/arch/arm/boot/dts/microchip/at91-q5xr5.dts
new file mode 100644
index 000000000000..9cf60b6f695c
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-q5xr5.dts
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree file for Exegin Q5xR5 board
+ *
+ * Copyright (C) 2014 Owen Kirby <osk@exegin.com>
+ */
+
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+
+/ {
+	model = "Exegin Q5x (rev5)";
+	compatible = "exegin,q5xr5", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 rootfstype=squashfs,jffs2";
+	};
+
+	memory {
+		reg = <0x20000000 0x0>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <18432000>;
+		};
+
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "cfi-flash";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x1000000 0x800000>;
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			kernel@0 {
+				label = "kernel";
+				reg = <0x0 0x200000>;
+			};
+
+			rootfs@200000 {
+				label = "rootfs";
+				reg = <0x200000 0x600000>;
+			};
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&pinctrl {
+	board {
+		pinctrl_pck0_as_mck: pck0_as_mck {
+			atmel,pins = <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	spi0 {
+		pinctrl_spi0: spi0-0 {
+			atmel,pins =
+				<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi0_npcs0: spi0_npcs0 {
+			atmel,pins = <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi0_npcs1: spi0_npcs1 {
+			atmel,pins = <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	spi1 {
+		pinctrl_spi1: spi1-0 {
+			atmel,pins =
+				<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi1_npcs0: spi1_npcs0 {
+			atmel,pins = <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi1_npcs1: spi1_npcs1 {
+			atmel,pins = <AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0 &pinctrl_spi0_npcs0 &pinctrl_spi0_npcs1>;
+	cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>, <&pioC 11 GPIO_ACTIVE_LOW>, <0>, <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		at91boot@0 {
+			label = "at91boot";
+			reg = <0x0 0x4000>;
+		};
+
+		uenv@4000 {
+			label = "uboot-env";
+			reg = <0x4000 0x4000>;
+		};
+
+		uboot@8000 {
+			label = "uboot";
+			reg = <0x8000 0x3E000>;
+		};
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1 &pinctrl_spi1_npcs0 &pinctrl_spi1_npcs1>;
+	cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>, <&pioC 5 GPIO_ACTIVE_LOW>, <0>, <0>;
+	status = "okay";
+};
+
+&usart0 {
+	pinctrl-0 =
+		<&pinctrl_usart0
+		 &pinctrl_usart0_rts
+		 &pinctrl_usart0_cts
+		 &pinctrl_usart0_dtr_dsr
+		 &pinctrl_usart0_dcd
+		 &pinctrl_usart0_ri>;
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <2>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/microchip/at91-qil_a9260.dts
index f46352790a41..892dbd8dbbed 100644
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/microchip/at91-qil_a9260.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91-qil_a9260.dts - Device Tree file for Calao QIL A9260 board
  *
  * Copyright (C) 2011-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 /dts-v1/;
 #include "at91sam9260.dtsi"
@@ -15,7 +14,7 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x4000000>;
 	};
 
@@ -31,6 +30,18 @@
 
 	ahb {
 		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			usb1: gadget@fffa4000 {
 				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
@@ -41,6 +52,7 @@
 					&pinctrl_mmc0_clk
 					&pinctrl_mmc0_slot0_cmd_dat0
 					&pinctrl_mmc0_slot0_dat1_3>;
+				pinctrl-names = "default";
 				status = "okay";
 				slot@0 {
 					reg = <0>;
@@ -96,13 +108,13 @@
 				status = "okay";
 			};
 
-			shdwc@fffffd10 {
+			shdwc: poweroff@fffffd10 {
 				atmel,wakeup-counter = <10>;
 				atmel,wakeup-rtt-timer;
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
@@ -186,10 +198,8 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		user_pb {
+		button-user {
 			label = "user_pb";
 			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts
index 171243ca4f2f..49dc1a4ccb36 100644
--- a/arch/arm/boot/dts/at91-sam9_l9260.dts
+++ b/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91-sam9_l9260.dts - Device Tree file for Olimex SAM9-L9260 board
  *
  *  Copyright (C) 2016 Raashid Muhammed <raashidmuhammed@zilogic.com>
- *
- * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "at91sam9260.dtsi"
@@ -16,7 +15,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x4000000>;
 	};
 
@@ -32,12 +31,25 @@
 
 	ahb {
 		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			mmc0: mmc@fffa8000 {
 				pinctrl-0 = <
 					&pinctrl_board_mmc0
 					&pinctrl_mmc0_clk
 					&pinctrl_mmc0_slot1_cmd_dat0
 					&pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
 				status = "okay";
 
 				slot@1 {
@@ -89,11 +101,11 @@
 		nand0: nand@40000000 {
 			nand-bus-width = <8>;
 			nand-ecc-mode = "soft";
-			nand-on-flash-bbt = <1>;
+			nand-on-flash-bbt;
 			status = "okay";
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts
new file mode 100644
index 000000000000..b9ffd9e5faac
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts
@@ -0,0 +1,508 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x60_curiosity.dts - Device Tree file for Microchip SAM9X60 Curiosity board
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Durai Manickam KR <durai.manickamkr@microchip.com>
+ */
+/dts-v1/;
+#include "sam9x60.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Microchip SAM9X60 Curiosity";
+	compatible = "microchip,sam9x60-curiosity", "microchip,sam9x60", "atmel,at91sam9";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c6;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-user {
+			label = "PB_USER";
+			gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-red {
+			label = "red";
+			gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioD 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+
+	vdd_1v8: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "VDD_1V8";
+	};
+
+	vdd_1v15: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1150000>;
+		regulator-min-microvolt = <1150000>;
+		regulator-name = "VDD_1V15";
+	};
+
+	vdd1_3v3: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD1_3V3";
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd1_3v3>;
+	vref-supply = <&vdd1_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_rx_tx>;
+	status = "disabled"; /* Conflict with dbgu. */
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_rx_tx>;
+	status = "okay";
+};
+
+&dbgu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dbgu>;
+	status = "okay"; /* Conflict with can0. */
+};
+
+&ebi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_lsb>;
+	status = "okay";
+
+	nand_controller: nand-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>;
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <8>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				uboot@40000 {
+					label = "u-boot";
+					reg = <0x40000 0xc0000>;
+				};
+
+				ubootenvred@100000 {
+					label = "U-Boot Env Redundant";
+					reg = <0x100000 0x40000>;
+				};
+
+				ubootenv@140000 {
+					label = "U-Boot Env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x1f800000>;
+				};
+			};
+		};
+	};
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c0: i2c@600 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+			pagesize = <16>;
+		};
+	};
+};
+
+&flx6 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c6: i2c@600 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx6_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "disabled";
+	};
+};
+
+&flx7 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart7: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx7_default>;
+		status = "okay";
+	};
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_rmii>;
+	status = "okay";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+		interrupt-parent = <&pioB>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pinctrl {
+	adc {
+		pinctrl_adc_default: adc-default {
+			atmel,pins = <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_adtrg_default: adtrg-default {
+			atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	can0 {
+		pinctrl_can0_rx_tx: can0-rx-tx {
+			atmel,pins =
+				<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0 */
+				 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX0 */
+				 AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	can1 {
+		pinctrl_can1_rx_tx: can1-rx-tx {
+			atmel,pins =
+				<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1 */
+				 AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX1 */
+				 AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	dbgu {
+		pinctrl_dbgu: dbgu-0 {
+			atmel,pins = <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				      AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+	};
+
+	ebi {
+		pinctrl_ebi_data_lsb: ebi-data-lsb {
+			atmel,pins =
+				<AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_ebi_addr_nand: ebi-addr-nand {
+			atmel,pins =
+				<AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+	};
+
+	flexcom {
+		pinctrl_flx0_default: flx0-twi {
+			atmel,pins =
+				<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx6_default: flx6-twi {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx7_default: flx7-usart {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
+				 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+		};
+	};
+
+	gpio-keys {
+		pinctrl_key_gpio_default: pinctrl-key-gpio {
+			atmel,pins = <AT91_PIOA 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	leds {
+		pinctrl_gpio_leds: gpio-leds {
+			atmel,pins = <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	macb0 {
+		pinctrl_macb0_rmii: macb0-rmii-0 {
+			atmel,pins =
+				<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+				 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+				 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
+				 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+				 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
+				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE	/* PB8 IRQ GPIO */
+				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
+		};
+	};
+
+	nand {
+		pinctrl_nand_oe_we: nand-oe-we-0 {
+			atmel,pins =
+				<AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_nand_rb: nand-rb-0 {
+			atmel,pins =
+				<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_nand_cs: nand-cs-0 {
+			atmel,pins =
+				<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	pwm0 {
+		pinctrl_pwm0_0: pwm0-0 {
+			atmel,pins = <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_1: pwm0-1 {
+			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_2: pwm0-2 {
+			atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc0 {
+		pinctrl_sdmmc0_default: sdmmc0 {
+			atmel,pins =
+				<AT91_PIOA 17 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA17 CK  periph A with pullup */
+				 AT91_PIOA 16 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA16 CMD periph A with pullup */
+				 AT91_PIOA 15 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA15 DAT0 periph A */
+				 AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA18 DAT1 periph A with pullup */
+				 AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA19 DAT2 periph A with pullup */
+				 AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA20 DAT3 periph A with pullup */
+		};
+
+		pinctrl_sdmmc0_cd: sdmmc0-cd {
+			atmel,pins =
+				<AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc1 {
+		pinctrl_sdmmc1_default: sdmmc1 {
+			atmel,pins =
+				<AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA13 CK periph B */
+				 AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA12 CMD periph B with pullup */
+				 AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA11 DAT0 periph B with pullup */
+				 AT91_PIOA 2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA2 DAT1 periph B with pullup */
+				 AT91_PIOA 3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA3 DAT2 periph B with pullup */
+				 AT91_PIOA 4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA4 DAT3 periph B with pullup */
+		};
+	};
+
+	usb0 {
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins = <AT91_PIOA 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	usb1 {
+		pinctrl_usb_default: usb-default {
+			atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+}; /* pinctrl */
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2>;
+	status = "okay";
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>;
+	cd-gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	disable-wp;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioA 27 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioD 18 GPIO_ACTIVE_HIGH
+			   &pioD 15 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
new file mode 100644
index 000000000000..c1ff3248bd8f
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
@@ -0,0 +1,699 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x60ek.dts - Device Tree file for Microchip SAM9X60-EK board
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com>
+ */
+/dts-v1/;
+#include "sam9x60.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Microchip SAM9X60-EK";
+	compatible = "microchip,sam9x60ek", "microchip,sam9x60", "atmel,at91sam9";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c6;
+		serial1 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-1 {
+			label = "SW1";
+			gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+		status = "okay"; /* Conflict with pwm0. */
+
+		led-red {
+			label = "red";
+			gpios = <&pioB 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioB 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioB 13 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vdd_1v8: fixed-regulator-vdd_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v15: fixed-regulator-vdd_1v15 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-always-on;
+	};
+
+	vdd1_3v3: fixed-regulator-vdd1_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD1_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd2_3v3: regulator-fixed-vdd2_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD2_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd1_3v3>;
+	vref-supply = <&vdd1_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_rx_tx>;
+	status = "disabled"; /* Conflict with dbgu. */
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_rx_tx>;
+	status = "okay";
+};
+
+&classd {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_classd_default>;
+	atmel,pwm-type = "diff";
+	atmel,non-overlap-time = <10>;
+	status = "okay";
+};
+
+&dbgu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dbgu>;
+	status = "okay"; /* Conflict with can0. */
+};
+
+&ebi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_0_7>;
+	status = "okay";
+
+	nand_controller: nand-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>;
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <8>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				uboot@40000 {
+					label = "u-boot";
+					reg = <0x40000 0xc0000>;
+				};
+
+				ubootenvred@100000 {
+					label = "U-Boot Env Redundant";
+					reg = <0x100000 0x40000>;
+				};
+
+				ubootenv@140000 {
+					label = "U-Boot Env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x1f800000>;
+				};
+			};
+		};
+	};
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c0: i2c@600 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+			pagesize = <16>;
+			status = "okay";
+		};
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "disabled";
+
+	spi4: spi@400 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		status = "disabled";
+	};
+};
+
+&flx5 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart5: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx5_default>;
+		status = "okay";
+	};
+};
+
+&flx6 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c6: i2c@600 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx6_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		power-monitor@17 {
+			compatible = "microchip,pac1934";
+			reg = <0x17>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@1 {
+				reg = <0x1>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDIOM";
+			};
+
+			channel@2 {
+				reg = <0x2>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDCORE";
+			};
+
+			channel@3 {
+				reg = <0x3>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDD3V3_MPU";
+			};
+
+			channel@4 {
+				reg = <0x4>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDD3V3";
+			};
+		};
+
+		gpio_exp: mcp23008@20 {
+			compatible = "microchip,mcp23008";
+			reg = <0x20>;
+		};
+	};
+};
+
+&gpbr {
+	status = "okay";
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2s_default>;
+	#sound-dai-cells = <0>;
+	status = "disabled"; /* Conflict with QSPI. */
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_rmii>;
+	status = "okay";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+		interrupt-parent = <&pioB>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pinctrl {
+	adc {
+		pinctrl_adc_default: adc_default {
+			atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_adtrg_default: adtrg_default {
+			atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	dbgu {
+		pinctrl_dbgu: dbgu-0 {
+			atmel,pins = <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				      AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+	};
+
+	i2s {
+		pinctrl_i2s_default: i2s {
+			atmel,pins =
+				<AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SCK */
+				 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SWS */
+				 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SDIN */
+				 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SDOUT */
+				 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* I2SMCK */
+		};
+	};
+
+	qspi {
+		pinctrl_qspi: qspi {
+			atmel,pins =
+				<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_SLEWRATE_DIS
+				 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_SLEWRATE_DIS
+				 AT91_PIOB 21 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOB 22 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOB 23 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOB 24 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+	};
+
+	nand {
+		pinctrl_nand_oe_we: nand-oe-we-0 {
+			atmel,pins =
+				<AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_nand_rb: nand-rb-0 {
+			atmel,pins =
+				<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_nand_cs: nand-cs-0 {
+			atmel,pins =
+				<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	ebi {
+		pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
+			atmel,pins =
+				<AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_ebi_data_0_15: ebi-data-msb-0 {
+			atmel,pins =
+				<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_ebi_addr_nand: ebi-addr-0 {
+			atmel,pins =
+				<AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+	};
+
+	flexcom {
+		pinctrl_flx0_default: flx0_twi {
+			atmel,pins =
+				<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx4_default: flx4_spi {
+			atmel,pins =
+				<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_flx5_default: flx5_uart {
+			atmel,pins =
+				<AT91_PIOA 7 AT91_PERIPH_C AT91_PINCTRL_NONE
+				 AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE
+				 AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE
+				 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_flx6_default: flx6_twi {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	classd {
+		pinctrl_classd_default: classd {
+			atmel,pins =
+				<AT91_PIOA 24 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 25 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN
+				 AT91_PIOA 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 27 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN>;
+		};
+	};
+
+	can0 {
+		pinctrl_can0_rx_tx: can0_rx_tx {
+			atmel,pins =
+				<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0 */
+				 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX0 */
+				 AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN	/* Enable CAN0 mux */
+				 AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	can1 {
+		pinctrl_can1_rx_tx: can1_rx_tx {
+			atmel,pins =
+				<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1 RXD1 */
+				 AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX1 TXD1 */
+				 AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN	/* Enable CAN1 mux */
+				 AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	macb0 {
+		pinctrl_macb0_rmii: macb0_rmii-0 {
+			atmel,pins =
+				<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+				 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+				 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
+				 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+				 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
+				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE	/* PB8 IRQ GPIO */
+				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
+		};
+	};
+
+	pwm0 {
+		pinctrl_pwm0_0: pwm0_0 {
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_1: pwm0_1 {
+			atmel,pins = <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_2: pwm0_2 {
+			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_3: pwm0_3 {
+			atmel,pins = <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc0 {
+		pinctrl_sdmmc0_default: sdmmc0 {
+			atmel,pins =
+				<AT91_PIOA 17 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA17 CK  periph A with pullup */
+				 AT91_PIOA 16 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA16 CMD periph A with pullup */
+				 AT91_PIOA 15 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA15 DAT0 periph A */
+				 AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA18 DAT1 periph A with pullup */
+				 AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA19 DAT2 periph A with pullup */
+				 AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA20 DAT3 periph A with pullup */
+		};
+		pinctrl_sdmmc0_cd: sdmmc0_cd {
+			atmel,pins =
+				<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc1 {
+		pinctrl_sdmmc1_default: sdmmc1 {
+			atmel,pins =
+				<AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA13 CK periph B */
+				 AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA12 CMD periph B with pullup */
+				 AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA11 DAT0 periph B with pullup */
+				 AT91_PIOA  2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA2 DAT1 periph B with pullup */
+				 AT91_PIOA  3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA3 DAT2 periph B with pullup */
+				 AT91_PIOA  4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA4 DAT3 periph B with pullup */
+		};
+	};
+
+	gpio_keys {
+		pinctrl_key_gpio_default: pinctrl_key_gpio {
+			atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	usb0 {
+		pinctrl_usba_vbus: usba_vbus {
+			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	usb1 {
+		pinctrl_usb_default: usb_default {
+			atmel,pins = <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	leds {
+		pinctrl_gpio_leds: gpio_leds {
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOB 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+}; /* pinctrl */
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2 &pinctrl_pwm0_3>;
+	status = "disabled"; /* Conflict with leds. */
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>;
+	status = "okay";
+	cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+	disable-wp;
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	no-1-8-v;
+	non-removable;
+	status = "disabled"; /* Conflict with flx4. */
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay"; /* Conflict with i2s. */
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		spi-cs-setup-delay-ns = <7>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+
+		at91bootstrap@0 {
+			label = "qspi: at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "qspi: bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "qspi: bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "qspi: bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "qspi: device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "qspi: kernel";
+			reg = <0x200000 0x600000>;
+		};
+	};
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioD 15 GPIO_ACTIVE_HIGH
+			   &pioD 16 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts
new file mode 100644
index 000000000000..1a6a909a5043
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x75_curiosity.dts - Device Tree file for Microchip SAM9X75 Curiosity board
+ *
+ * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Varshini Rajendran <varshini.rajendran@microchip.com>
+ */
+/dts-v1/;
+#include "sam9x7.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Microchip SAM9X75 Curiosity";
+	compatible = "microchip,sam9x75-curiosity", "microchip,sam9x7", "atmel,at91sam9";
+
+	aliases {
+		i2c0 = &i2c6;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-user {
+			label = "USER";
+			gpios = <&pioC 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_0>;
+			wakeup-source;
+		};
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+
+		led_red: led-red {
+			label = "red";
+			gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&pinctrl_red_led_gpio_default>;
+		};
+
+		led_green: led-green {
+			label = "green";
+			gpios = <&pioC 21 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&pinctrl_green_led_gpio_default>;
+		};
+
+		led_blue: led-blue {
+			label = "blue";
+			gpios = <&pioC 20 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&pinctrl_blue_led_gpio_default>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+		device_type = "memory";
+	};
+};
+
+&classd {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_classd_default>;
+	atmel,pwm-type = "diff";
+	atmel,non-overlap-time = <10>;
+	status = "okay";
+};
+
+&dbgu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dbgu_default>;
+	status = "okay";
+};
+
+&dma0 {
+	status = "okay";
+};
+
+&flx6 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flx6_default>;
+	i2c-analog-filter;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	status = "okay";
+
+	pmic@5b {
+		compatible = "microchip,mcp16502";
+		reg = <0x5b>;
+
+		regulators {
+			vdd_3v3: VDD_IO {
+				regulator-name = "VDD_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-mode = <4>;
+				};
+			};
+
+			vddioddr: VDD_DDR {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddcore: VDD_CORE {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-mode = <4>;
+				};
+			};
+
+			dcdc4: VDD_OTHER {
+				regulator-name = "VDD_OTHER";
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-mode = <4>;
+				};
+			};
+
+			vldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&flx7 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+};
+
+&i2c7 {
+	dmas = <0>, <0>;
+	i2c-analog-filter;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flx7_default>;
+	status = "okay";
+
+	power-monitor@10 {
+		compatible = "microchip,pac1934";
+		reg = <0x10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <0x1>;
+			shunt-resistor-micro-ohms = <10000>;
+			label = "VDD3V3";
+		};
+
+		channel@2 {
+			reg = <0x2>;
+			shunt-resistor-micro-ohms = <10000>;
+			label = "DCDC4";
+		};
+
+		channel@3 {
+			reg = <0x3>;
+			shunt-resistor-micro-ohms = <10000>;
+			label = "VDDCORE";
+		};
+
+		channel@4 {
+			reg = <0x4>;
+			shunt-resistor-micro-ohms = <10000>;
+			label = "VDDIODDR";
+		};
+	};
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2s_default>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&main_xtal {
+	clock-frequency = <24000000>;
+};
+
+&pinctrl {
+	classd {
+		pinctrl_classd_default: classd-default {
+			atmel,pins =
+				<AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN>;
+		};
+	};
+
+	dbgu {
+		pinctrl_dbgu_default: dbgu-default {
+			atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+				     <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+	};
+
+	flexcom {
+		pinctrl_flx6_default: flx6-default {
+			atmel,pins =
+				<AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx7_default: flx7-default {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	gpio-keys {
+		pinctrl_key_gpio_default: key-gpio-default {
+			atmel,pins = <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	i2s {
+		pinctrl_i2s_default: i2s-default {
+			atmel,pins =
+				<AT91_PIOB 26 AT91_PERIPH_D AT91_PINCTRL_NONE>,		/* I2SCK */
+				<AT91_PIOB 15 AT91_PERIPH_D AT91_PINCTRL_NONE>,		/* I2SWS */
+				<AT91_PIOB 16 AT91_PERIPH_D AT91_PINCTRL_NONE>,		/* I2SDIN */
+				<AT91_PIOB 17 AT91_PERIPH_D AT91_PINCTRL_NONE>,		/* I2SDOUT */
+				<AT91_PIOB 25 AT91_PERIPH_D AT91_PINCTRL_NONE>;		/* I2SMCK */
+		};
+	};
+
+	led-controller {
+		pinctrl_red_led_gpio_default: red-led-gpio-default {
+			atmel,pins = <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_green_led_gpio_default: green-led-gpio-default {
+			atmel,pins = <AT91_PIOC 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_blue_led_gpio_default: blue-led-gpio-default {
+			atmel,pins = <AT91_PIOC 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc0 {
+		pinctrl_sdmmc0_default: sdmmc0-default {
+			atmel,pins =
+				<AT91_PIOA 2 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>,				/* PA2 CK  periph A with pullup */
+				<AT91_PIOA 1 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>,	/* PA1 CMD periph A with pullup */
+				<AT91_PIOA 0 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>,	/* PA0 DAT0 periph A */
+				<AT91_PIOA 3 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>,	/* PA3 DAT1 periph A with pullup */
+				<AT91_PIOA 4 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>,	/* PA4 DAT2 periph A with pullup */
+				<AT91_PIOA 5 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>;	/* PA5 DAT3 periph A with pullup */
+		};
+	};
+}; /* pinctrl */
+
+&poweroff {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	status = "okay";
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&tcb {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi
new file mode 100644
index 000000000000..13c28e92b17e
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board
+ *
+ *  Copyright (c) 2017, Microchip Technology Inc.
+ *                2017 Cristian Birsan <cristian.birsan@microchip.com>
+ *                2017 Claudiu Beznea <claudiu.beznea@microchip.com>
+ */
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Atmel SAMA5D27 SoM1";
+	compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		i2c0 = &i2c0;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	ahb {
+		sdmmc0: sdio-host@a0000000 {
+			microchip,sdcal-inverted;
+		};
+
+		apb {
+			qspi1: spi@f0024000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_qspi1_default>;
+
+				flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "jedec,spi-nor";
+					reg = <0>;
+					spi-max-frequency = <104000000>;
+					spi-cs-setup-delay-ns = <7>;
+					spi-tx-bus-width = <4>;
+					spi-rx-bus-width = <4>;
+					m25p,fast-read;
+
+					at91bootstrap@0 {
+						label = "at91bootstrap";
+						reg = <0x00000000 0x00040000>;
+					};
+
+					bootloader@40000 {
+						label = "bootloader";
+						reg = <0x00040000 0x000c0000>;
+					};
+
+					bootloaderenvred@100000 {
+						label = "bootloader env redundant";
+						reg = <0x00100000 0x00040000>;
+					};
+
+					bootloaderenv@140000 {
+						label = "bootloader env";
+						reg = <0x00140000 0x00040000>;
+					};
+
+					dtb@180000 {
+						label = "device tree";
+						reg = <0x00180000 0x00080000>;
+					};
+
+					kernel@200000 {
+						label = "kernel";
+						reg = <0x00200000 0x00600000>;
+					};
+				};
+			};
+
+			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_default>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy-mode = "rmii";
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+					interrupt-parent = <&pioA>;
+					interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+				};
+			};
+
+			i2c0: i2c@f8028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c0_default>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "okay";
+
+				eeprom@50 {
+					compatible = "atmel,24c02";
+					reg = <0x50>;
+					pagesize = <8>;
+				};
+			};
+
+			pinctrl@fc038000 {
+				pinctrl_i2c0_default: i2c0_default {
+					pinmux = <PIN_PD21__TWD0>,
+						 <PIN_PD22__TWCK0>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_gpio: i2c0_gpio {
+					pinmux = <PIN_PD21__GPIO>,
+						 <PIN_PD22__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_qspi1_default: qspi1_default {
+					sck_cs {
+						pinmux = <PIN_PB5__QSPI1_SCK>,
+							 <PIN_PB6__QSPI1_CS>;
+						bias-disable;
+					};
+
+					data {
+						pinmux = <PIN_PB7__QSPI1_IO0>,
+							 <PIN_PB8__QSPI1_IO1>,
+							 <PIN_PB9__QSPI1_IO2>,
+							 <PIN_PB10__QSPI1_IO3>;
+						bias-pull-up;
+					};
+				};
+
+				pinctrl_macb0_default: macb0_default {
+					pinmux = <PIN_PD9__GTXCK>,
+						 <PIN_PD10__GTXEN>,
+						 <PIN_PD11__GRXDV>,
+						 <PIN_PD12__GRXER>,
+						 <PIN_PD13__GRX0>,
+						 <PIN_PD14__GRX1>,
+						 <PIN_PD15__GTX0>,
+						 <PIN_PD16__GTX1>,
+						 <PIN_PD17__GMDC>,
+						 <PIN_PD18__GMDIO>;
+					bias-disable;
+				};
+
+				pinctrl_macb0_phy_irq: macb0_phy_irq {
+					pinmux = <PIN_PD31__GPIO>;
+					bias-disable;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
new file mode 100644
index 000000000000..45edf6214cf7
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
@@ -0,0 +1,551 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_som1_ek.dts - Device Tree file for SAMA5D27-SOM1-EK board
+ *
+ *  Copyright (c) 2017, Microchip Technology Inc.
+ *                2016 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *                2017 Cristian Birsan <cristian.birsan@microchip.com>
+ *                2017 Claudiu Beznea <claudiu.beznea@microchip.com>
+ */
+/dts-v1/;
+#include "at91-sama5d27_som1.dtsi"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Atmel SAMA5D27 SOM1 EK";
+	compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart1;	/* DBGU */
+		serial1 = &uart4;	/* mikro BUS 1 */
+		serial2 = &uart2;	/* mikro BUS 2 */
+		i2c1 = &i2c1;
+		i2c2 = &i2c3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ahb {
+		usb0: gadget@300000 {
+			atmel,vbus-gpio = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: usb@400000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
+					   &pioA PIN_PA27 GPIO_ACTIVE_HIGH
+					   0
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: usb@500000 {
+			status = "okay";
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			bus-width = <8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc0_default>;
+			status = "okay";
+		};
+
+		sdmmc1: sdio-host@b0000000 {
+			bus-width = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc1_default>;
+			status = "okay";
+		};
+
+		apb {
+			isc: isc@f0008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
+			};
+
+			qspi1: spi@f0024000 {
+				status = "okay";
+			};
+
+			spi0: spi@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_default>;
+				status = "okay";
+			};
+
+			macb0: ethernet@f8008000 {
+				status = "okay";
+			};
+
+			tcb0: timer@f800c000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			uart1: serial@f8020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_default>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			uart2: serial@f8024000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mikrobus2_uart>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			pwm0: pwm@f802c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>;
+				status = "disabled"; /* Conflict with leds. */
+			};
+
+			flx1: flexcom@f8038000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+				status = "okay";
+
+				i2c3: i2c@600 {
+					dmas = <0>, <0>;
+					i2c-analog-filter;
+					i2c-digital-filter;
+					i2c-digital-filter-width-ns = <35>;
+					pinctrl-names = "default", "gpio";
+					pinctrl-0 = <&pinctrl_mikrobus_i2c>;
+					pinctrl-1 = <&pinctrl_i2c3_gpio>;
+					sda-gpios = <&pioA PIN_PA24 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PA23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+					status = "okay";
+				};
+			};
+
+			poweroff@f8048010 {
+				debounce-delay-us = <976>;
+				atmel,wakeup-rtc-timer;
+
+				input@0 {
+					reg = <0>;
+				};
+			};
+
+			watchdog@f8048040 {
+				status = "okay";
+			};
+
+			uart3: serial@fc008000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3_default>;
+				status = "disabled"; /* Conflict with isc. */
+			};
+
+			uart4: serial@fc00c000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mikrobus1_uart>;
+				status = "okay";
+			};
+
+			flx3: flexcom@fc014000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+				status = "disabled";
+
+				uart8: serial@200 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx3_default>;
+					status = "disabled"; /* Conflict with isc. */
+				};
+
+				spi5: spi@400 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx3_default>;
+					status = "disabled"; /* Conflict with isc. */
+				};
+			};
+
+			flx4: flexcom@fc018000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+				status = "okay";
+
+				uart9: serial@200 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx4_default>;
+					status = "disabled"; /* Conflict with spi6 and i2c6. */
+				};
+
+				spi6: spi@400 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
+					status = "okay"; /* Conflict with uart5 and i2c6. */
+				};
+
+				i2c6: i2c@600 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx4_default>;
+					status = "disabled"; /* Conflict with uart5 and spi6. */
+				};
+			};
+
+			i2c1: i2c@fc028000 {
+				dmas = <0>, <0>;
+				i2c-analog-filter;
+				i2c-digital-filter;
+				i2c-digital-filter-width-ns = <35>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "okay";
+			};
+
+			adc: adc@fc030000 {
+				vddana-supply = <&vddana>;
+				vref-supply = <&advref>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mikrobus1_an &pinctrl_mikrobus2_an>;
+
+				status = "okay";
+			};
+
+			pinctrl@fc038000 {
+
+				pinctrl_can1_default: can1_default {
+					pinmux = <PIN_PC26__CANTX1>,
+						 <PIN_PC27__CANRX1>;
+					bias-disable;
+				};
+
+				pinctrl_flx3_default: flx3_default {
+					pinmux = <PIN_PC20__FLEXCOM3_IO0>,
+						 <PIN_PC19__FLEXCOM3_IO1>,
+						 <PIN_PC18__FLEXCOM3_IO2>,
+						 <PIN_PC21__FLEXCOM3_IO3>,
+						 <PIN_PC22__FLEXCOM3_IO4>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_default: i2c1_default {
+					pinmux = <PIN_PD4__TWD1>,
+						 <PIN_PD5__TWCK1>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_gpio: i2c1_gpio {
+                                        pinmux = <PIN_PD4__GPIO>,
+                                                 <PIN_PD5__GPIO>;
+                                        bias-disable;
+                                };
+
+
+				pinctrl_isc_base: isc_base {
+					pinmux = <PIN_PC21__ISC_PCK>,
+						 <PIN_PC22__ISC_VSYNC>,
+						 <PIN_PC23__ISC_HSYNC>,
+						 <PIN_PC24__ISC_MCK>;
+					bias-disable;
+				};
+
+				pinctrl_isc_data_8bit: isc_data_8bit {
+					pinmux = <PIN_PC20__ISC_D11>,
+						 <PIN_PC19__ISC_D10>,
+						 <PIN_PC18__ISC_D9>,
+						 <PIN_PC17__ISC_D8>,
+						 <PIN_PC16__ISC_D7>,
+						 <PIN_PC15__ISC_D6>,
+						 <PIN_PC14__ISC_D5>,
+						 <PIN_PC13__ISC_D4>;
+					bias-disable;
+				};
+
+				pinctrl_isc_data_9_10: isc_data_9_10 {
+					pinmux = <PIN_PC12__ISC_D3>,
+						 <PIN_PC11__ISC_D2>;
+					bias-disable;
+				};
+
+				pinctrl_isc_data_11_12: isc_data_11_12 {
+					pinmux = <PIN_PC10__ISC_D1>,
+						 <PIN_PC9__ISC_D0>;
+					bias-disable;
+				};
+
+				pinctrl_key_gpio_default: key_gpio_default {
+					pinmux = <PIN_PA29__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_led_gpio_default: led_gpio_default {
+					pinmux = <PIN_PA10__GPIO>,
+						 <PIN_PB1__GPIO>,
+						 <PIN_PA31__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_sdmmc0_default: sdmmc0_default {
+					cmd_data {
+						pinmux = <PIN_PA1__SDMMC0_CMD>,
+							 <PIN_PA2__SDMMC0_DAT0>,
+							 <PIN_PA3__SDMMC0_DAT1>,
+							 <PIN_PA4__SDMMC0_DAT2>,
+							 <PIN_PA5__SDMMC0_DAT3>,
+							 <PIN_PA6__SDMMC0_DAT4>,
+							 <PIN_PA7__SDMMC0_DAT5>,
+							 <PIN_PA8__SDMMC0_DAT6>,
+							 <PIN_PA9__SDMMC0_DAT7>;
+						bias-disable;
+					};
+
+					ck_cd_vddsel {
+						pinmux = <PIN_PA0__SDMMC0_CK>,
+							 <PIN_PA11__SDMMC0_VDDSEL>,
+							 <PIN_PA13__SDMMC0_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_sdmmc1_default: sdmmc1_default {
+					cmd_data {
+						pinmux = <PIN_PA28__SDMMC1_CMD>,
+							 <PIN_PA18__SDMMC1_DAT0>,
+							 <PIN_PA19__SDMMC1_DAT1>,
+							 <PIN_PA20__SDMMC1_DAT2>,
+							 <PIN_PA21__SDMMC1_DAT3>;
+						bias-disable;
+					};
+
+					conf-ck_cd {
+						pinmux = <PIN_PA22__SDMMC1_CK>,
+							 <PIN_PA30__SDMMC1_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_spi0_default: spi0_default {
+					pinmux = <PIN_PA14__SPI0_SPCK>,
+						 <PIN_PA15__SPI0_MOSI>,
+						 <PIN_PA16__SPI0_MISO>,
+						 <PIN_PA17__SPI0_NPCS0>;
+					bias-disable;
+				};
+
+				pinctrl_uart1_default: uart1_default {
+					pinmux = <PIN_PD2__URXD1>,
+						 <PIN_PD3__UTXD1>;
+					bias-disable;
+				};
+
+				pinctrl_uart3_default: uart3_default {
+					pinmux = <PIN_PC12__URXD3>,
+						 <PIN_PC13__UTXD3>;
+					bias-disable;
+				};
+
+				pinctrl_usb_default: usb_default {
+					pinmux = <PIN_PA27__GPIO>,
+						 <PIN_PD19__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_usba_vbus: usba_vbus {
+					pinmux = <PIN_PD20__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_an: mikrobus1_an {
+					pinmux = <PIN_PD25__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_an: mikrobus2_an {
+					pinmux = <PIN_PD26__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_rst: mikrobus1_rst {
+					pinmux = <PIN_PB2__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_rst: mikrobus2_rst {
+					pinmux = <PIN_PA26__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
+					pinmux = <PIN_PD0__FLEXCOM4_IO4>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs {
+					pinmux = <PIN_PC31__FLEXCOM4_IO3>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus_spi: mikrobus_spi {
+					pinmux = <PIN_PC28__FLEXCOM4_IO0>,
+						 <PIN_PC29__FLEXCOM4_IO1>,
+						 <PIN_PC30__FLEXCOM4_IO2>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_pwm: mikrobus1_pwm {
+					pinmux = <PIN_PB1__PWML1>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_pwm: mikrobus2_pwm {
+					pinmux = <PIN_PA31__PWML0>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_int: mikrobus1_int {
+					pinmux = <PIN_PB0__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_int: mikrobus2_int {
+					pinmux = <PIN_PA25__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_uart: mikrobus1_uart {
+					pinmux = <PIN_PB3__URXD4>,
+						 <PIN_PB4__UTXD4>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_uart: mikrobus2_uart {
+					pinmux = <PIN_PD23__URXD2>,
+						 <PIN_PD24__UTXD2>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus_i2c: mikrobus1_i2c {
+					pinmux = <PIN_PA24__FLEXCOM1_IO0>,
+						 <PIN_PA23__FLEXCOM1_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_i2c3_gpio: i2c3_gpio {
+					pinmux = <PIN_PA24__GPIO>,
+						 <PIN_PA23__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_flx4_default: flx4_uart_default {
+					pinmux = <PIN_PC28__FLEXCOM4_IO0>,
+						 <PIN_PC29__FLEXCOM4_IO1>,
+						 <PIN_PC30__FLEXCOM4_IO2>,
+						 <PIN_PC31__FLEXCOM4_IO3>,
+						 <PIN_PD0__FLEXCOM4_IO4>;
+					bias-disable;
+				};
+			};
+
+			can1: can@fc050000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_default>;
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button {
+			label = "USER";
+			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* Conflict with pwm0. */
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vddin_3v3: fixed-regulator-vddin_3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDDIN_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		status = "okay";
+	};
+
+	vddana: fixed-regulator-vddana {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDDANA";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vddin_3v3>;
+		status = "okay";
+	};
+
+	advref: fixed-regulator-advref {
+		compatible = "regulator-fixed";
+
+		regulator-name = "advref";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vddana>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
new file mode 100644
index 000000000000..0417f53b3e96
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_wlsom1.dtsi - Device Tree file for SAMA5D27 WLSOM1
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
+ * Author: Eugen Hristev <eugen.hristev@microcihp.com>
+ */
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Microchip SAMA5D27 WLSOM1";
+	compatible = "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		i2c0 = &i2c0;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-wilc1000";
+		reset-gpios = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
+		powerdown-gpios = <&pioA PIN_PA29 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pinctrl_wilc_pwrseq>;
+		pinctrl-names = "default";
+	};
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+
+	uart6: serial@200 {
+		pinctrl-0 = <&pinctrl_flx1_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	pinctrl-names = "default", "gpio";
+	sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&pioA PIN_PD19 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@5b {
+		compatible = "microchip,mcp16502";
+		reg = <0x5b>;
+		lvin-supply = <&reg_5v>;
+		pvin1-supply = <&reg_5v>;
+		pvin2-supply = <&reg_5v>;
+		pvin3-supply = <&reg_5v>;
+		pvin4-supply = <&reg_5v>;
+		status = "okay";
+		lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>;
+
+		regulators {
+			vdd_3v3: VDD_IO {
+				regulator-name = "VDD_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddio_ddr: VDD_DDR {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_core: VDD_CORE {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_ddr: VDD_OTHER {
+				regulator-name = "VDD_OTHER";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&macb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	phy-mode = "rmii";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PB24 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+	};
+};
+
+&pmc {
+	atmel,osc-bypass;
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_default>;
+	status = "disabled";
+
+	qspi1_flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		spi-cs-setup-delay-ns = <7>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		m25p,fast-read;
+		status = "disabled";
+
+		at91bootstrap@0 {
+			label = "at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "kernel";
+			reg = <0x200000 0x600000>;
+		};
+	};
+};
+
+&pioA {
+	pinctrl_flx1_default: flx1_usart_default {
+		pinmux = <PIN_PA24__FLEXCOM1_IO0>,
+			 <PIN_PA23__FLEXCOM1_IO1>,
+			 <PIN_PA25__FLEXCOM1_IO3>,
+			 <PIN_PA26__FLEXCOM1_IO4>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_default: i2c0_default {
+		pinmux = <PIN_PD21__TWD0>,
+			 <PIN_PD22__TWCK0>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_gpio: i2c0_gpio {
+		pinmux = <PIN_PD21__GPIO>,
+			 <PIN_PD22__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PD19__TWD1>,
+			 <PIN_PD20__TWCK1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_gpio: i2c1_gpio {
+		pinmux = <PIN_PD19__GPIO>,
+			 <PIN_PD20__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_default: macb0_default {
+		pinmux = <PIN_PB14__GTXCK>,
+			 <PIN_PB15__GTXEN>,
+			 <PIN_PB16__GRXDV>,
+			 <PIN_PB17__GRXER>,
+			 <PIN_PB18__GRX0>,
+			 <PIN_PB19__GRX1>,
+			 <PIN_PB20__GTX0>,
+			 <PIN_PB21__GTX1>,
+			 <PIN_PB22__GMDC>,
+			 <PIN_PB23__GMDIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_phy_irq: macb0_phy_irq {
+		pinmux = <PIN_PB24__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_qspi1_default: qspi1_default {
+		pinmux = <PIN_PB5__QSPI1_SCK>,
+			 <PIN_PB6__QSPI1_CS>,
+			 <PIN_PB7__QSPI1_IO0>,
+			 <PIN_PB8__QSPI1_IO1>,
+			 <PIN_PB9__QSPI1_IO2>,
+			 <PIN_PB10__QSPI1_IO3>;
+		bias-pull-up;
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1_default {
+		cmd-data {
+			pinmux = <PIN_PA28__SDMMC1_CMD>,
+				 <PIN_PA18__SDMMC1_DAT0>,
+				 <PIN_PA19__SDMMC1_DAT1>,
+				 <PIN_PA20__SDMMC1_DAT2>,
+				 <PIN_PA21__SDMMC1_DAT3>;
+			bias-disable;
+		};
+
+		conf-ck {
+			pinmux = <PIN_PA22__SDMMC1_CK>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_wilc_default: wilc_default {
+		conf-irq {
+			pinmux = <PIN_PB25__GPIO>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_wilc_pwrseq: wilc_pwrseq {
+		conf-ce-nrst {
+			pinmux = <PIN_PA27__GPIO>,
+				 <PIN_PA29__GPIO>;
+			bias-disable;
+		};
+
+		conf-rtcclk {
+			pinmux = <PIN_PB13__PCK1>;
+			bias-disable;
+		};
+	};
+};
+
+&sdmmc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	no-1-8-v;
+	non-removable;
+	bus-width = <4>;
+	status = "okay";
+
+	wilc: wifi@0 {
+		reg = <0>;
+		compatible = "microchip,wilc3000", "microchip,wilc1000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wilc_default>;
+		clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+		clock-names = "rtc";
+		interrupts = <PIN_PB25 IRQ_TYPE_NONE>;
+		interrupt-parent = <&pioA>;
+		assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+		assigned-clock-rates = <32768>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
new file mode 100644
index 000000000000..35a933eec573
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_wlsom1_ek.dts - Device Tree file for SAMA5D27 WLSOM1 EK
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
+ */
+/dts-v1/;
+#include "at91-sama5d27_wlsom1.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Microchip SAMA5D27 WLSOM1 EK";
+	compatible = "microchip,sama5d27-wlsom1-ek", "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;	/* DBGU */
+		serial1 = &uart6;	/* BT */
+		serial2 = &uart5;	/* mikro BUS 2 */
+		serial3 = &uart3;	/* mikro BUS 1 */
+		i2c1 = &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-1 {
+			label = "USER BUTTON";
+			gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay";
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PA6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd_3v3>;
+	vref-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default>;
+	status = "okay";
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart5: serial@200 {
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		pinctrl-names = "default";
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&flx1 {
+	status = "okay";
+
+	uart6: serial@200 {
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&macb0 {
+	status = "okay";
+};
+
+&pioA {
+	/*
+	 * There is no real pinmux for ADC, if the pin
+	 * is not requested by another peripheral then
+	 * the muxing is done when channel is enabled.
+	 * Requesting pins for ADC is GPIO is
+	 * encouraged to prevent conflicts and to
+	 * disable bias in order to be in the same
+	 * state when the pin is not muxed to the adc.
+	 */
+	pinctrl_adc_default: adc_default {
+		pinmux = <PIN_PD25__GPIO>,
+			 <PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_flx0_default: flx0_usart_default {
+		pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+			 <PIN_PB29__FLEXCOM0_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PB2__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PA6__GPIO>,
+			 <PIN_PA7__GPIO>,
+			 <PIN_PA8__GPIO>;
+		bias-pull-down;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0_default {
+		cmd_data {
+			pinmux = <PIN_PA1__SDMMC0_CMD>,
+				 <PIN_PA2__SDMMC0_DAT0>,
+				 <PIN_PA3__SDMMC0_DAT1>,
+				 <PIN_PA4__SDMMC0_DAT2>,
+				 <PIN_PA5__SDMMC0_DAT3>;
+			bias-disable;
+		};
+
+		ck_cd_vddsel {
+			pinmux = <PIN_PA0__SDMMC0_CK>,
+				 <PIN_PA11__SDMMC0_VDDSEL>,
+				 <PIN_PA12__SDMMC0_WP>,
+				 <PIN_PA13__SDMMC0_CD>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart0_default: uart0_default {
+		pinmux = <PIN_PB26__URXD0>,
+			 <PIN_PB27__UTXD0>;
+		bias-disable;
+	};
+
+	pinctrl_uart3_default: uart3_default {
+		pinmux = <PIN_PB11__URXD3>,
+			 <PIN_PB12__UTXD3>;
+		bias-disable;
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		pinmux = <PIN_PA31__PWML0>,
+			 <PIN_PA30__PWMH0>;
+		bias-disable;
+	};
+
+	pinctrl_usb_default: usb_default {
+		pinmux = <PIN_PA10__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_usba_vbus: usba_vbus {
+		pinmux = <PIN_PA16__GPIO>;
+		bias-disable;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default>;
+	status = "okay";
+};
+
+&qspi1 {
+	status = "okay";
+
+	qspi1_flash: flash@0 {
+		status = "okay";
+	};
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_default>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioA PIN_PA16 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioA PIN_PA10 GPIO_ACTIVE_HIGH
+			   0
+			  >;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	phy_type = "hsic";
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
new file mode 100644
index 000000000000..7be215781549
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
@@ -0,0 +1,614 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d29_curiosity.dts - Device Tree file for SAMA5D29 Curiosity board
+ *
+ * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Mihai Sain <mihai.sain@microchip.com>
+ *
+ */
+/dts-v1/;
+#include "sama5d29.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+
+/ {
+	model = "Microchip SAMA5D29 Curiosity";
+	compatible = "microchip,sama5d29-curiosity", "atmel,sama5d29", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;	// debug
+		serial1 = &uart1;	// RPi
+		serial2 = &uart3;	// mikro BUS 2
+		serial3 = &uart4;	// mikro BUS 1
+		serial4 = &uart6;	// flx1 Bluetooth
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-1 {
+			label = "USER BUTTON";
+			gpios = <&pioA PIN_PA17 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay";
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PA9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x20000000>;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd_3v3>;
+	vref-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+	status = "okay";
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart6: serial@200 {
+		pinctrl-0 = <&pinctrl_flx1_default>;
+		pinctrl-names = "default";
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi6: spi@400 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rpi_spi>;
+		status = "okay";
+	};
+};
+
+&i2c0 {
+	dmas = <0>, <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	sda-gpios = <&pioA PIN_PB31 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PC0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	i2c-sda-hold-time-ns = <350>;
+	status = "okay";
+
+	pmic@5b {
+		compatible = "microchip,mcp16502";
+		reg = <0x5b>;
+		lvin-supply = <&reg_5v>;
+		pvin1-supply = <&reg_5v>;
+		pvin2-supply = <&reg_5v>;
+		pvin3-supply = <&reg_5v>;
+		pvin4-supply = <&reg_5v>;
+		status = "okay";
+		lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>;
+
+		regulators {
+			vdd_3v3: VDD_IO {
+				regulator-name = "VDD_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddio_ddr: VDD_DDR {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_core: VDD_CORE {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_ddr: VDD_OTHER {
+				regulator-name = "VDD_OTHER";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	i2c-analog-filter;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pioA {
+	pinctrl_adc_default: adc-default {
+		pinmux = <PIN_PD25__GPIO>,
+			 <PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_adtrg_default: adtrg-default {
+		pinmux = <PIN_PD31__ADTRG>;
+		bias-pull-up;
+	};
+
+	pinctrl_can0_default: can0-default {
+		pinmux = <PIN_PC10__CANTX0>,
+			 <PIN_PC11__CANRX0>;
+		bias-disable;
+	};
+
+	pinctrl_can1_default: can1-default {
+		pinmux = <PIN_PC26__CANTX1>,
+			 <PIN_PC27__CANRX1>;
+		bias-disable;
+	};
+
+	pinctrl_debug_uart: debug-uart {
+		pinmux = <PIN_PB26__URXD0>,
+			 <PIN_PB27__UTXD0>;
+		bias-disable;
+	};
+
+	pinctrl_flx1_default: flx1-default {
+		pinmux = <PIN_PA24__FLEXCOM1_IO0>,
+			 <PIN_PA23__FLEXCOM1_IO1>,
+			 <PIN_PA25__FLEXCOM1_IO3>,
+			 <PIN_PA26__FLEXCOM1_IO4>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		pinmux = <PIN_PB31__TWD0>,
+			 <PIN_PC0__TWCK0>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio-default {
+		pinmux = <PIN_PB31__GPIO>,
+			 <PIN_PC0__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		pinmux = <PIN_PD4__TWD1>,
+			 <PIN_PD5__TWCK1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-default {
+		pinmux = <PIN_PD4__GPIO>,
+			 <PIN_PD5__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_key_gpio_default: key-gpio-default {
+		pinmux = <PIN_PA17__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led-gpio-default {
+		pinmux = <PIN_PA7__GPIO>,
+			 <PIN_PA8__GPIO>,
+			 <PIN_PA9__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_mikrobus1_pwm: mikrobus1-pwm {
+		pinmux = <PIN_PA31__PWML0>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_pwm: mikrobus2-pwm {
+		pinmux = <PIN_PB0__PWMH1>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_uart: mikrobus1-uart {
+		pinmux = <PIN_PB3__URXD4>,
+			 <PIN_PB4__UTXD4>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_uart: mikrobus2-uart {
+		pinmux = <PIN_PB11__URXD3>,
+			 <PIN_PB12__UTXD3>;
+		bias-disable;
+	};
+
+	pinctrl_qspi1_default: qspi1-default {
+		pinmux = <PIN_PB5__QSPI1_SCK>,
+			 <PIN_PB6__QSPI1_CS>,
+			 <PIN_PB7__QSPI1_IO0>,
+			 <PIN_PB8__QSPI1_IO1>,
+			 <PIN_PB9__QSPI1_IO2>,
+			 <PIN_PB10__QSPI1_IO3>;
+		bias-disable;
+	};
+
+	pinctrl_rpi_spi: rpi-spi {
+		pinmux = <PIN_PD12__FLEXCOM4_IO0>,
+			 <PIN_PD13__FLEXCOM4_IO1>,
+			 <PIN_PD14__FLEXCOM4_IO2>,
+			 <PIN_PD15__FLEXCOM4_IO3>,
+			 <PIN_PD16__FLEXCOM4_IO4>;
+		bias-disable;
+	};
+
+	pinctrl_rpi_uart: rpi-uart {
+		pinmux = <PIN_PD2__URXD1>,
+			 <PIN_PD3__UTXD1>;
+		bias-disable;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0-default {
+		pinmux = <PIN_PA0__SDMMC0_CK>,
+			 <PIN_PA1__SDMMC0_CMD>,
+			 <PIN_PA2__SDMMC0_DAT0>,
+			 <PIN_PA3__SDMMC0_DAT1>,
+			 <PIN_PA4__SDMMC0_DAT2>,
+			 <PIN_PA5__SDMMC0_DAT3>,
+			 <PIN_PA11__SDMMC0_VDDSEL>,
+			 <PIN_PA13__SDMMC0_CD>;
+		bias-disable;
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1-default {
+		pinmux = <PIN_PA18__SDMMC1_DAT0>,
+			 <PIN_PA19__SDMMC1_DAT1>,
+			 <PIN_PA20__SDMMC1_DAT2>,
+			 <PIN_PA21__SDMMC1_DAT3>,
+			 <PIN_PA22__SDMMC1_CK>,
+			 <PIN_PA28__SDMMC1_CMD>,
+			 <PIN_PA30__SDMMC1_CD>;
+		bias-disable;
+	};
+
+	pinctrl_spi1_default: spi1-default {
+		pinmux = <PIN_PC1__SPI1_SPCK>,
+			 <PIN_PC2__SPI1_MOSI>,
+			 <PIN_PC3__SPI1_MISO>,
+			 <PIN_PC4__SPI1_NPCS0>,
+			 <PIN_PC5__SPI1_NPCS1>,
+			 <PIN_PC6__SPI1_NPCS2>,
+			 <PIN_PC7__SPI1_NPCS3>;
+		bias-disable;
+	};
+
+	pinctrl_usb_default: usb-default {
+		pinmux = <PIN_PA6__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_usba_vbus: usba-vbus {
+		pinmux = <PIN_PB13__GPIO>;
+		bias-disable;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>;
+	status = "okay";
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_default>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+		label = "atmel_qspi1";
+		status = "okay";
+
+		at91bootstrap@0 {
+			label = "at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "kernel";
+			reg = <0x200000 0x600000>;
+		};
+	};
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	disable-wp;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	disable-wp;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_debug_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rpi_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus2_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioA PIN_PB13 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioA PIN_PA6 GPIO_ACTIVE_HIGH
+			   0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
new file mode 100644
index 000000000000..fbae6a9af6c3
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
@@ -0,0 +1,834 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d2_icp.dts - Device Tree file for SAMA5D2-ICP board
+ *
+ *  Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ *	Author: Radu Pirea & Razvan Stefanescu,
+ *		Codrin Ciubotariu <codrin.ciubotariu@microchip.com>,
+ *		Cristian Birsan <cristian.birsan@microchip.com>
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+
+/ {
+	model = "Microchip SAMA5D2-ICP";
+	compatible = "microchip,sama5d2-icp", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;	/* debug uart0 + mikro BUS 1 */
+		serial1 = &uart1;	/* mikro BUS 3 */
+		serial3 = &uart3;	/* mikro BUS 2 */
+		serial5 = &uart7;	/* flx2 */
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-1 {
+			label = "USER_PB1";
+			gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* conflict with pwm0 */
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PB0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_MAIN_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd_io_reg>;
+	vref-supply = <&vdd_io_reg>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+	status = "okay";
+};
+
+&flx0 { /* mikrobus2 spi */
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi2: spi@400 {
+		dmas = <0>, <0>;
+		cs-gpios = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mikrobus2_spi &pinctrl_ksz_spi_cs>;
+		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch0: ksz8563@0 {
+			compatible = "microchip,ksz8563";
+			reg = <0>;
+			reset-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_LOW>;
+
+			spi-max-frequency = <500000>;
+			spi-cpha;
+			spi-cpol;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					label = "lan1";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan2";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "cpu";
+					ethernet = <&macb0>;
+					phy-mode = "mii";
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&flx2 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart7: serial@200 {
+		pinctrl-0 = <&pinctrl_flx2_default>;
+		pinctrl-names = "default";
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay"; /* Conflict w/ qspi1. */
+	};
+};
+
+&flx3 { /* mikrobus1 spi */
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi5: spi@400 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>;
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c6: i2c@600 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		power-monitor@10 {
+			compatible = "microchip,pac1934";
+			reg = <0x10>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@1 {
+				reg = <0x1>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDD3V3_1";
+			};
+
+			channel@2 {
+				reg = <0x2>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDD3V3_2";
+			};
+
+			channel@3 {
+				reg = <0x3>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDCORE";
+			};
+
+			channel@4 {
+				reg = <0x4>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDIODDR";
+			};
+		};
+
+		pmic@5b {
+			compatible = "microchip,mcp16502";
+			reg = <0x5b>;
+			lvin-supply = <&reg_5v>;
+			pvin1-supply = <&reg_5v>;
+			pvin2-supply = <&reg_5v>;
+			pvin3-supply = <&reg_5v>;
+			pvin4-supply = <&reg_5v>;
+			status = "okay";
+			lpm-gpios = <&pioBU 7 GPIO_ACTIVE_LOW>;
+
+			regulators {
+				vdd_io_reg: VDD_IO {
+					regulator-name = "VDD_IO";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				VDD_DDR {
+					regulator-name = "VDD_DDR";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				VDD_CORE {
+					regulator-name = "VDD_CORE";
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				VDD_OTHER {
+					regulator-name = "VDD_OTHER";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1850000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				LDO1 {
+					regulator-name = "LDO1";
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				LDO2 {
+					regulator-name = "LDO2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+			};
+		};
+	};
+};
+
+&i2c0 { /* mikrobus i2c */
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_mikrobus_i2c>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	status = "okay";
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&pioA PIN_PD19 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+		status = "okay";
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+		status = "disabled";
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+		status = "disabled";
+	};
+};
+
+&macb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq &pinctrl_macb0_rst>;
+	phy-mode = "mii";
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&pioA {
+	pinctrl_adc_default: adc_default {
+		pinmux = <PIN_PD24__GPIO>,
+				<PIN_PD25__GPIO>,
+				<PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	/*
+	 * The ADTRG pin can work on any edge type.
+	 * In here it's being pulled up, so need to
+	 * connect it to ground to get an edge e.g.
+	 * Trigger can be configured on falling, rise
+	 * or any edge, and the pull-up can be changed
+	 * to pull-down or left floating according to
+	 * needs.
+	 */
+	pinctrl_adtrg_default: adtrg_default {
+		pinmux = <PIN_PD31__ADTRG>;
+		bias-pull-up;
+	};
+
+	pinctrl_flx4_default: flx4_default {
+		pinmux = <PIN_PC28__FLEXCOM4_IO0>,
+			 <PIN_PC29__FLEXCOM4_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_can0_default: can0_default {
+		pinmux = <PIN_PC10__CANTX0>,
+			 <PIN_PC11__CANRX0>;
+		bias-disable;
+	};
+
+	pinctrl_can1_default: can1_default {
+		pinmux = <PIN_PC26__CANTX1>,
+			 <PIN_PC27__CANRX1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PD19__TWD1>,
+			 <PIN_PD20__TWCK1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_gpio: i2c1_gpio {
+                pinmux = <PIN_PD19__GPIO>,
+                         <PIN_PD20__GPIO>;
+                bias-disable;
+        };
+
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PD0__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PB0__GPIO>,
+			 <PIN_PB1__GPIO>,
+			 <PIN_PA31__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_qspi1_default: qspi1_default {
+		pinmux = <PIN_PA6__QSPI1_SCK>,
+			 <PIN_PA7__QSPI1_IO0>,
+			 <PIN_PA8__QSPI1_IO1>,
+			 <PIN_PA9__QSPI1_IO2>,
+			 <PIN_PA10__QSPI1_IO3>,
+			 <PIN_PA11__QSPI1_CS>;
+		bias-disable;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0_default {
+		cmd_data {
+			pinmux = <PIN_PA1__SDMMC0_CMD>,
+				 <PIN_PA2__SDMMC0_DAT0>,
+				 <PIN_PA3__SDMMC0_DAT1>,
+				 <PIN_PA4__SDMMC0_DAT2>,
+				 <PIN_PA5__SDMMC0_DAT3>;
+			bias-disable;
+		};
+
+		ck_cd {
+			pinmux = <PIN_PA0__SDMMC0_CK>,
+				 <PIN_PA13__SDMMC0_CD>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1_default {
+		cmd_data {
+			pinmux = <PIN_PA18__SDMMC1_DAT0>,
+				 <PIN_PA19__SDMMC1_DAT1>,
+				 <PIN_PA20__SDMMC1_DAT2>,
+				 <PIN_PA21__SDMMC1_DAT3>;
+			bias-disable;
+		};
+
+		ck_cd {
+			pinmux = <PIN_PA22__SDMMC1_CK>,
+				 <PIN_PA28__SDMMC1_CMD>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_mikrobus_i2c: mikrobus_i2c {
+		pinmux = <PIN_PD22__TWCK0>,
+			 <PIN_PD21__TWD0>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_gpio: i2c0_gpio {
+		pinmux = <PIN_PD21__GPIO>,
+			 <PIN_PD22__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_an: mikrobus1_an {
+		pinmux = <PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_rst: mikrobus1_rst {
+		pinmux = <PIN_PC5__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
+		pinmux = <PIN_PC21__FLEXCOM3_IO3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi: mikrobus1_spi {
+		pinmux = <PIN_PC20__FLEXCOM3_IO0>,
+			 <PIN_PC19__FLEXCOM3_IO1>,
+			 <PIN_PC18__FLEXCOM3_IO2>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_pwm: mikrobus1_pwm {
+		pinmux = <PIN_PC4__TIOB1>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_int: mikrobus1_int {
+		pinmux = <PIN_PC3__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_uart: mikrobus1_uart {
+		pinmux = <PIN_PB26__URXD0>,
+			 <PIN_PB27__UTXD0>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_an: mikrobus2_an {
+		pinmux = <PIN_PD25__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_rst: mikrobus2_rst {
+		pinmux = <PIN_PB24__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs {
+		pinmux = <PIN_PB31__FLEXCOM0_IO3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_spi: mikrobus2_spi {
+		pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+			 <PIN_PB29__FLEXCOM0_IO1>,
+			 <PIN_PB30__FLEXCOM0_IO2>;
+		bias-disable;
+	};
+
+	pinctrl_ksz_spi_cs: ksz_spi_cs {
+		pinmux = <PIN_PC0__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_pwm: mikrobus2_pwm {
+		pinmux = <PIN_PB23__TIOB2>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_int: mikrobus2_int {
+		pinmux = <PIN_PB22__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_uart: mikrobus2_uart {
+		pinmux = <PIN_PC12__URXD3>,
+			 <PIN_PC13__UTXD3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_an: mikrobus3_an {
+		pinmux = <PIN_PD24__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_rst: mikrobus3_rst {
+		pinmux = <PIN_PB21__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_spi_cs: mikrobus3_spi_cs {
+		pinmux = <PIN_PA17__SPI0_NPCS0>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_spi: mikrobus3_spi {
+		pinmux = <PIN_PA14__SPI0_SPCK>,
+			 <PIN_PA16__SPI0_MISO>,
+			 <PIN_PA15__SPI0_MOSI>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_pwm: mikrobus3_pwm {
+		pinmux = <PIN_PB20__TIOB3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_int: mikrobus3_int {
+		pinmux = <PIN_PB18__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_uart: mikrobus3_uart {
+		pinmux = <PIN_PC7__URXD1>,
+			 <PIN_PC8__UTXD1>;
+		bias-disable;
+	};
+
+	pinctrl_usb_default: usb_default {
+		pinmux = <PIN_PC17__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_usba_vbus: usba_vbus {
+		pinmux = <PIN_PD23__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_pwm0_pwm2_default: pwm0_pwm2_default {
+		pinmux = <PIN_PB5__PWMH2>,
+			 <PIN_PB6__PWML2>;
+		bias-pull-up;
+	};
+
+	pinctrl_macb0_default: macb0_default {
+		pinmux = <PIN_PD1__GRXCK>,
+			 <PIN_PD2__GTXER>,
+			 <PIN_PD5__GRX2>,
+			 <PIN_PD6__GRX3>,
+			 <PIN_PD7__GTX2>,
+			 <PIN_PD8__GTX3>,
+			 <PIN_PD9__GTXCK>,
+			 <PIN_PD10__GTXEN>,
+			 <PIN_PD11__GRXDV>,
+			 <PIN_PD12__GRXER>,
+			 <PIN_PD13__GRX0>,
+			 <PIN_PD14__GRX1>,
+			 <PIN_PD15__GTX0>,
+			 <PIN_PD16__GTX1>,
+			 <PIN_PD17__GMDC>,
+			 <PIN_PD18__GMDIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_phy_irq: macb0_phy_irq {
+		pinmux = <PIN_PD3__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_rst: macb0_sw_rst {
+		pinmux = <PIN_PD4__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_flx2_default: flx2_default {
+		pinmux = <PIN_PA6__FLEXCOM2_IO0>,
+			 <PIN_PA7__FLEXCOM2_IO1>,
+			 <PIN_PA9__FLEXCOM2_IO3>,
+			 <PIN_PA10__FLEXCOM2_IO4>;
+		bias-disable;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_pwm2_default>;
+	status = "disabled"; /* conflict with leds, HSIC */
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_default>;
+	status = "disabled"; /* Conflict with wilc_pwrseq, flx2 */
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		spi-cs-setup-delay-ns = <7>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+
+		at91bootstrap@0 {
+			label = "qspi: at91bootstrap";
+			reg = <0x00000000 0x00040000>;
+		};
+
+		bootloader@40000 {
+			label = "qspi: bootloader";
+			reg = <0x00040000 0x000c0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "qspi: bootloader env redundant";
+			reg = <0x00100000 0x00040000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "qspi: bootloader env";
+			reg = <0x00140000 0x00040000>;
+		};
+
+		dtb@180000 {
+			label = "qspi: device tree";
+			reg = <0x00180000 0x00080000>;
+		};
+
+		kernel@200000 {
+			label = "qspi: kernel";
+			reg = <0x00200000 0x00600000>;
+		};
+	};
+};
+
+&sdmmc0 {
+	no-1-8-v;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&spi0 {  /* mikrobus3 spi */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus3_spi &pinctrl_mikrobus3_spi_cs>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus3_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus2_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioA PIN_PD23 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	phy_type = "hsic";
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
new file mode 100644
index 000000000000..10d69f6957cf
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * at91-sama5d2_ptc_ek.dts - Device Tree file for SAMA5D2 PTC EK board
+ *
+ *  Copyright (C) 2017 Microchip/Atmel,
+ *		  2017 Wenyou Yang <wenyou.yang@microchip.com>
+ *		  2017 Ludovic Desroches <ludovic.desroches@microchip.com>
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Atmel SAMA5D2 PTC EK";
+	compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;	/* DBGU */
+		i2c0 = &i2c0;	/* mikroBUS 1 */
+		i2c1 = &i2c1;	/* XPRO EXT1 */
+		i2c2 = &i2c2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	ahb {
+		usb0: gadget@300000 {
+			atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: usb@400000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioA PIN_PB12 GPIO_ACTIVE_HIGH
+					   0
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: usb@500000 {
+			status = "okay";
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand_default>;
+			status = "okay"; /* conflicts with sdmmc1 and qspi0 */
+
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0xc0000>;
+						};
+
+						bootloaderenvred@100000 {
+							label = "bootloader env redundant";
+							reg = <0x100000 0x40000>;
+						};
+
+						bootloaderenv@140000 {
+							label = "bootloader env";
+							reg = <0x140000 0x40000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x1f800000>;
+						};
+					};
+				};
+			};
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			bus-width = <8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc0_default>;
+			status = "okay";
+		};
+
+		apb {
+			spi0: spi@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_default>;
+				status = "okay";
+			};
+
+			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioA>;
+					interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+
+			tcb0: timer@f800c000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			uart0: serial@f801c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0_default>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			uart2: serial@f8024000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2_default>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			i2c0: i2c@f8028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c0_default>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "okay";
+			};
+
+			flx0: flexcom@f8034000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+				status = "okay";
+
+				i2c2: i2c@600 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default", "gpio";
+					pinctrl-0 = <&pinctrl_flx0_default>;
+					pinctrl-1 = <&pinctrl_flx0_gpio>;
+					sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+					status = "okay";
+				};
+			};
+
+			poweroff@f8048010 {
+				debounce-delay-us = <976>;
+
+				input@0 {
+					reg = <0>;
+				};
+			};
+
+			watchdog@f8048040 {
+				status = "okay";
+			};
+
+			spi1: spi@fc000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1_default>;
+				status = "okay";
+			};
+
+			i2c1: i2c@fc028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioA PIN_PC6 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PC7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "okay";
+
+				eeprom@50 {
+					compatible = "atmel,24c02";
+					reg = <0x50>;
+					pagesize = <8>;
+				};
+			};
+
+			pinctrl@fc038000 {
+				pinctrl_flx0_default: flx0_default {
+					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+						 <PIN_PB29__FLEXCOM0_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_flx0_gpio: flx0_gpio {
+					pinmux = <PIN_PB28__GPIO>,
+						 <PIN_PB29__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_default: i2c0_default {
+					pinmux = <PIN_PD21__TWD0>,
+						 <PIN_PD22__TWCK0>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_gpio: i2c0_gpio {
+					pinmux = <PIN_PD21__GPIO>,
+						 <PIN_PD22__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_default: i2c1_default {
+					pinmux = <PIN_PC6__TWD1>,
+						 <PIN_PC7__TWCK1>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_gpio: i2c1_gpio {
+					pinmux = <PIN_PC6__GPIO>,
+						 <PIN_PC7__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_key_gpio_default: key_gpio_default {
+					pinmux = <PIN_PA10__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_led_gpio_default: led_gpio_default {
+					pinmux = <PIN_PB6__GPIO>,
+						 <PIN_PB8__GPIO>,
+						 <PIN_PB10__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_macb0_default: macb0_default {
+					pinmux = <PIN_PB14__GTXCK>,
+						 <PIN_PB15__GTXEN>,
+						 <PIN_PB16__GRXDV>,
+						 <PIN_PB17__GRXER>,
+						 <PIN_PB18__GRX0>,
+						 <PIN_PB19__GRX1>,
+						 <PIN_PB20__GTX0>,
+						 <PIN_PB21__GTX1>,
+						 <PIN_PB22__GMDC>,
+						 <PIN_PB23__GMDIO>;
+					bias-disable;
+				};
+
+				pinctrl_macb0_phy_irq: macb0_phy_irq {
+					pinmux = <PIN_PB24__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_nand_default: nand_default {
+					re_we_data {
+						pinmux = <PIN_PA22__D0>,
+							 <PIN_PA23__D1>,
+							 <PIN_PA24__D2>,
+							 <PIN_PA25__D3>,
+							 <PIN_PA26__D4>,
+							 <PIN_PA27__D5>,
+							 <PIN_PA28__D6>,
+							 <PIN_PA29__D7>,
+							 <PIN_PA30__NWE_NANDWE>,
+							 <PIN_PB2__NRD_NANDOE>;
+						bias-pull-up;
+						atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
+					};
+
+					ale_cle_rdy_cs {
+						pinmux = <PIN_PB0__A21_NANDALE>,
+							 <PIN_PB1__A22_NANDCLE>,
+							 <PIN_PC8__NANDRDY>,
+							 <PIN_PA31__NCS3>;
+						bias-pull-up;
+					};
+				};
+
+				pinctrl_sdmmc0_default: sdmmc0_default {
+					cmd_data {
+						pinmux = <PIN_PA1__SDMMC0_CMD>,
+							 <PIN_PA2__SDMMC0_DAT0>,
+							 <PIN_PA3__SDMMC0_DAT1>,
+							 <PIN_PA4__SDMMC0_DAT2>,
+							 <PIN_PA5__SDMMC0_DAT3>,
+							 <PIN_PA6__SDMMC0_DAT4>,
+							 <PIN_PA7__SDMMC0_DAT5>,
+							 <PIN_PA8__SDMMC0_DAT6>,
+							 <PIN_PA9__SDMMC0_DAT7>;
+						bias-pull-up;
+					};
+
+					ck_cd_vddsel {
+						pinmux = <PIN_PA0__SDMMC0_CK>,
+							 <PIN_PA11__SDMMC0_VDDSEL>,
+							 <PIN_PA13__SDMMC0_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_spi0_default: spi0_default {
+					pinmux = <PIN_PA14__SPI0_SPCK>,
+						 <PIN_PA15__SPI0_MOSI>,
+						 <PIN_PA16__SPI0_MISO>,
+						 <PIN_PA17__SPI0_NPCS0>;
+					bias-disable;
+				};
+
+				pinctrl_spi1_default: spi1_default {
+					pinmux = <PIN_PC1__SPI1_SPCK>,
+						 <PIN_PC2__SPI1_MOSI>,
+						 <PIN_PC3__SPI1_MISO>,
+						 <PIN_PC4__SPI1_NPCS0>;
+					bias-disable;
+				};
+
+				pinctrl_uart0_default: uart0_default {
+					pinmux = <PIN_PB26__URXD0>,
+						 <PIN_PB27__UTXD0>;
+					bias-disable;
+				};
+
+				pinctrl_uart2_default: uart2_default {
+					pinmux = <PIN_PD23__URXD2>,
+						 <PIN_PD24__UTXD2>;
+					bias-disable;
+				};
+
+				pinctrl_usb_default: usb_default {
+					pinmux = <PIN_PB12__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_usba_vbus: usba_vbus {
+					pinmux = <PIN_PB11__GPIO>;
+					bias-disable;
+				};
+
+			};
+
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-1 {
+			label = "PB_USER";
+			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay";
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PB10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
new file mode 100644
index 000000000000..7e77a55ed41d
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
@@ -0,0 +1,745 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/active-semi,8945a-regulator.h>
+
+/ {
+	model = "Atmel SAMA5D2 Xplained";
+	compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart1;	/* DBGU */
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;		/* XPRO EXT2 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		usb0: gadget@300000 {
+			atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: usb@400000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
+					   &pioA PIN_PB10 GPIO_ACTIVE_HIGH
+					   0
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: usb@500000 {
+			status = "okay";
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			bus-width = <8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc0_default>;
+			non-removable;
+			mmc-ddr-3_3v;
+			status = "okay";
+		};
+
+		sdmmc1: sdio-host@b0000000 {
+			bus-width = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc1_default>;
+			status = "okay"; /* conflict with qspi0 */
+			vqmmc-supply = <&vdd_3v3_reg>;
+			vmmc-supply = <&vdd_3v3_reg>;
+		};
+
+		apb {
+			qspi0: spi@f0020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_qspi0_default>;
+				status = "disabled"; /* conflict with sdmmc1 */
+
+				flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "jedec,spi-nor";
+					reg = <0>;
+					spi-max-frequency = <80000000>;
+					spi-tx-bus-width = <4>;
+					spi-rx-bus-width = <4>;
+					m25p,fast-read;
+
+					at91bootstrap@0 {
+						label = "at91bootstrap";
+						reg = <0x00000000 0x00040000>;
+					};
+
+					bootloader@40000 {
+						label = "bootloader";
+						reg = <0x00040000 0x000c0000>;
+					};
+
+					bootloaderenvred@100000 {
+						label = "bootloader env redundant";
+						reg = <0x00100000 0x00040000>;
+					};
+
+					bootloaderenv@140000 {
+						label = "bootloader env";
+						reg = <0x00140000 0x00040000>;
+					};
+
+					dtb@180000 {
+						label = "device tree";
+						reg = <0x00180000 0x00080000>;
+					};
+
+					kernel@200000 {
+						label = "kernel";
+						reg = <0x00200000 0x00600000>;
+					};
+
+					misc@800000 {
+						label = "misc";
+						reg = <0x00800000 0x00000000>;
+					};
+				};
+			};
+
+			spi0: spi@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_default>;
+				status = "okay";
+
+				flash@0 {
+					compatible = "atmel,at25df321a";
+					reg = <0>;
+					spi-max-frequency = <50000000>;
+				};
+			};
+
+			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioA>;
+					interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+
+			tcb0: timer@f800c000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			uart1: serial@f8020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_default>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			i2c0: i2c@f8028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c0_default>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				i2c-sda-hold-time-ns = <350>;
+				status = "okay";
+
+				pmic@5b {
+					compatible = "active-semi,act8945a";
+					reg = <0x5b>;
+					active-semi,vsel-high;
+					status = "okay";
+
+					regulators {
+						vdd_1v35_reg: REG_DCDC1 {
+							regulator-name = "VDD_1V35";
+							regulator-min-microvolt = <1350000>;
+							regulator-max-microvolt = <1350000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-on-in-suspend;
+								regulator-suspend-min-microvolt = <1400000>;
+								regulator-suspend-max-microvolt = <1400000>;
+								regulator-changeable-in-suspend;
+								regulator-mode = <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							};
+						};
+
+						vdd_1v2_reg: REG_DCDC2 {
+							regulator-name = "VDD_1V2";
+							regulator-min-microvolt = <1100000>;
+							regulator-max-microvolt = <1300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_3v3_reg: REG_DCDC3 {
+							regulator-name = "VDD_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_fuse_reg: REG_LDO1 {
+							regulator-name = "VDD_FUSE";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_3v3_lp_reg: REG_LDO2 {
+							regulator-name = "VDD_3V3_LP";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_led_reg: REG_LDO3 {
+							regulator-name = "VDD_LED";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_sdhc_1v8_reg: REG_LDO4 {
+							regulator-name = "VDD_SDHC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+					};
+
+					charger {
+						compatible = "active-semi,act8945a-charger";
+						pinctrl-names = "default";
+						pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+						interrupt-parent = <&pioA>;
+						interrupts = <PIN_PB13 IRQ_TYPE_EDGE_RISING>;
+
+						active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
+						active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
+						active-semi,input-voltage-threshold-microvolt = <6600>;
+						active-semi,precondition-timeout = <40>;
+						active-semi,total-timeout = <3>;
+						status = "okay";
+					};
+				};
+			};
+
+			pwm0: pwm@f802c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwm2_default>;
+				status = "disabled"; /* conflict with leds */
+			};
+
+			flx0: flexcom@f8034000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+				status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
+
+				uart5: serial@200 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx0_default>;
+					status = "okay";
+				};
+
+				i2c2: i2c@600 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default", "gpio";
+					pinctrl-0 = <&pinctrl_flx0_default>;
+					pinctrl-1 = <&pinctrl_i2c2_gpio>;
+					sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+					i2c-sda-hold-time-ns = <350>;
+					i2c-analog-filter;
+					i2c-digital-filter;
+					i2c-digital-filter-width-ns = <35>;
+					status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
+				};
+			};
+
+			poweroff@f8048010 {
+				debounce-delay-us = <976>;
+				atmel,wakeup-rtc-timer;
+
+				input@0 {
+					reg = <0>;
+				};
+			};
+
+			watchdog@f8048040 {
+				status = "okay";
+			};
+
+			i2s0: i2s@f8050000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2s0_default>;
+				status = "disabled"; /* conflict with can0 */
+			};
+
+			can0: can@f8054000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can0_default>;
+				status = "okay";
+			};
+
+			uart3: serial@fc008000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3_default>;
+				status = "okay";
+			};
+
+			flx4: flexcom@fc018000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+				status = "okay";
+
+				i2c6: i2c@600 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default", "gpio";
+					pinctrl-0 = <&pinctrl_flx4_default>;
+					pinctrl-1 = <&pinctrl_flx4_gpio>;
+					sda-gpios = <&pioA PIN_PD12 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PD13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+					i2c-analog-filter;
+					i2c-digital-filter;
+					i2c-digital-filter-width-ns = <35>;
+					status = "okay";
+				};
+			};
+
+			i2c1: i2c@fc028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
+				i2c-analog-filter;
+				i2c-digital-filter;
+				i2c-digital-filter-width-ns = <35>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "okay";
+
+				eeprom@54 {
+					compatible = "atmel,24c02";
+					reg = <0x54>;
+					pagesize = <16>;
+				};
+			};
+
+			adc: adc@fc030000 {
+				vddana-supply = <&vdd_3v3_lp_reg>;
+				vref-supply = <&vdd_3v3_lp_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+				status = "okay";
+			};
+
+			pinctrl@fc038000 {
+				/*
+				 * There is no real pinmux for ADC, if the pin
+				 * is not requested by another peripheral then
+				 * the muxing is done when channel is enabled.
+				 * Requesting pins for ADC is GPIO is
+				 * encouraged to prevent conflicts and to
+				 * disable bias in order to be in the same
+				 * state when the pin is not muxed to the adc.
+				 */
+				pinctrl_adc_default: adc_default {
+					pinmux = <PIN_PD23__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_can0_default: can0_default {
+					pinmux = <PIN_PC10__CANTX0>,
+						 <PIN_PC11__CANRX0>;
+					bias-disable;
+				};
+
+				pinctrl_can1_default: can1_default {
+					pinmux = <PIN_PC26__CANTX1>,
+						 <PIN_PC27__CANRX1>;
+					bias-disable;
+				};
+
+				/*
+				 * The ADTRG pin can work on any edge type.
+				 * In here it's being pulled up, so need to
+				 * connect it to ground to get an edge e.g.
+				 * Trigger can be configured on falling, rise
+				 * or any edge, and the pull-up can be changed
+				 * to pull-down or left floating according to
+				 * needs.
+				 */
+				pinctrl_adtrg_default: adtrg_default {
+					pinmux = <PIN_PD31__ADTRG>;
+					bias-pull-up;
+				};
+
+				pinctrl_charger_chglev: charger_chglev {
+					pinmux = <PIN_PA12__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_charger_irq: charger_irq {
+					pinmux = <PIN_PB13__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_charger_lbo: charger_lbo {
+					pinmux = <PIN_PC8__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_classd_default_pfets: classd_default_pfets {
+					pinmux = <PIN_PB1__CLASSD_R0>,
+						 <PIN_PB3__CLASSD_R2>;
+					bias-pull-up;
+				};
+
+				pinctrl_classd_default_nfets: classd_default_nfets {
+					pinmux = <PIN_PB2__CLASSD_R1>,
+						 <PIN_PB4__CLASSD_R3>;
+					bias-pull-down;
+				};
+
+				pinctrl_flx0_default: flx0_default {
+					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+						 <PIN_PB29__FLEXCOM0_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_flx4_default: flx4_default {
+					pinmux = <PIN_PD12__FLEXCOM4_IO0>,
+						 <PIN_PD13__FLEXCOM4_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_flx4_gpio: flx4_gpio {
+					pinmux = <PIN_PD12__GPIO>,
+						 <PIN_PD13__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_default: i2c0_default {
+					pinmux = <PIN_PD21__TWD0>,
+						 <PIN_PD22__TWCK0>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_gpio: i2c0_gpio {
+					pinmux = <PIN_PD21__GPIO>,
+						 <PIN_PD22__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_default: i2c1_default {
+					pinmux = <PIN_PD4__TWD1>,
+						 <PIN_PD5__TWCK1>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_gpio: i2c1_gpio {
+					pinmux = <PIN_PD4__GPIO>,
+						 <PIN_PD5__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c2_gpio: i2c2_gpio {
+					pinmux = <PIN_PB28__GPIO>,
+						 <PIN_PB29__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2s0_default: i2s0_default {
+					pinmux = <PIN_PC1__I2SC0_CK>,
+						 <PIN_PC2__I2SC0_MCK>,
+						 <PIN_PC3__I2SC0_WS>,
+						 <PIN_PC4__I2SC0_DI0>,
+						 <PIN_PC5__I2SC0_DO0>;
+					bias-disable;
+				};
+
+				pinctrl_i2s1_default: i2s1_default {
+					pinmux = <PIN_PA15__I2SC1_CK>,
+						 <PIN_PA14__I2SC1_MCK>,
+						 <PIN_PA16__I2SC1_WS>,
+						 <PIN_PA17__I2SC1_DI0>,
+						 <PIN_PA18__I2SC1_DO0>;
+					bias-disable;
+				};
+
+				pinctrl_key_gpio_default: key_gpio_default {
+					pinmux = <PIN_PB9__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_led_gpio_default: led_gpio_default {
+					pinmux = <PIN_PB0__GPIO>,
+						 <PIN_PB5__GPIO>,
+						 <PIN_PB6__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_macb0_default: macb0_default {
+					pinmux = <PIN_PB14__GTXCK>,
+						 <PIN_PB15__GTXEN>,
+						 <PIN_PB16__GRXDV>,
+						 <PIN_PB17__GRXER>,
+						 <PIN_PB18__GRX0>,
+						 <PIN_PB19__GRX1>,
+						 <PIN_PB20__GTX0>,
+						 <PIN_PB21__GTX1>,
+						 <PIN_PB22__GMDC>,
+						 <PIN_PB23__GMDIO>;
+					bias-disable;
+				};
+
+				pinctrl_macb0_phy_irq: macb0_phy_irq {
+					pinmux = <PIN_PC9__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_qspi0_default: qspi0_default {
+					sck_cs {
+						pinmux = <PIN_PA22__QSPI0_SCK>,
+							 <PIN_PA23__QSPI0_CS>;
+						bias-disable;
+					};
+
+					data {
+						pinmux = <PIN_PA24__QSPI0_IO0>,
+							 <PIN_PA25__QSPI0_IO1>,
+							 <PIN_PA26__QSPI0_IO2>,
+							 <PIN_PA27__QSPI0_IO3>;
+						bias-pull-up;
+					};
+				};
+
+				pinctrl_sdmmc0_default: sdmmc0_default {
+					cmd_data {
+						pinmux = <PIN_PA1__SDMMC0_CMD>,
+							 <PIN_PA2__SDMMC0_DAT0>,
+							 <PIN_PA3__SDMMC0_DAT1>,
+							 <PIN_PA4__SDMMC0_DAT2>,
+							 <PIN_PA5__SDMMC0_DAT3>,
+							 <PIN_PA6__SDMMC0_DAT4>,
+							 <PIN_PA7__SDMMC0_DAT5>,
+							 <PIN_PA8__SDMMC0_DAT6>,
+							 <PIN_PA9__SDMMC0_DAT7>;
+						bias-disable;
+					};
+
+					ck_cd_rstn {
+						pinmux = <PIN_PA0__SDMMC0_CK>,
+							 <PIN_PA10__SDMMC0_RSTN>,
+							 <PIN_PA13__SDMMC0_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_sdmmc1_default: sdmmc1_default {
+					cmd_data {
+						pinmux = <PIN_PA28__SDMMC1_CMD>,
+							 <PIN_PA18__SDMMC1_DAT0>,
+							 <PIN_PA19__SDMMC1_DAT1>,
+							 <PIN_PA20__SDMMC1_DAT2>,
+							 <PIN_PA21__SDMMC1_DAT3>;
+						bias-disable;
+					};
+
+					conf-ck_cd {
+						pinmux = <PIN_PA22__SDMMC1_CK>,
+							 <PIN_PA30__SDMMC1_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_spi0_default: spi0_default {
+					pinmux = <PIN_PA14__SPI0_SPCK>,
+						 <PIN_PA15__SPI0_MOSI>,
+						 <PIN_PA16__SPI0_MISO>,
+						 <PIN_PA17__SPI0_NPCS0>;
+					bias-disable;
+				};
+
+				pinctrl_uart1_default: uart1_default {
+					pinmux = <PIN_PD2__URXD1>,
+						 <PIN_PD3__UTXD1>;
+					bias-disable;
+				};
+
+				pinctrl_uart3_default: uart3_default {
+					pinmux = <PIN_PB11__URXD3>,
+						 <PIN_PB12__UTXD3>;
+					bias-disable;
+				};
+
+				pinctrl_usb_default: usb_default {
+					pinmux = <PIN_PB10__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_usba_vbus: usba_vbus {
+					pinmux = <PIN_PA31__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_pwm0_pwm2_default: pwm0_pwm2_default {
+					pinmux = <PIN_PB5__PWMH2>,
+						 <PIN_PB6__PWML2>;
+					bias-pull-up;
+				};
+			};
+
+			classd: classd@fc048000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_classd_default_pfets &pinctrl_classd_default_nfets>;
+				atmel,pwm-type = "diff";
+				atmel,non-overlap-time = <10>;
+				status = "okay";
+			};
+
+			i2s1: i2s@fc04c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2s1_default>;
+				status = "disabled"; /* conflict with spi0, sdmmc1 */
+			};
+
+			can1: can@fc050000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_default>;
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button {
+			label = "PB_USER";
+			gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* conflict with pwm0 */
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>;
+		};
+
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_eds.dts b/arch/arm/boot/dts/microchip/at91-sama5d3_eds.dts
new file mode 100644
index 000000000000..c287b03d768b
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d3_eds.dts
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * at91-sama5d3_eds.dts - Device Tree file for the SAMA5D3 Ethernet
+ *    Development System board.
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Jerry Ray <jerry.ray@microchip.com>
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+	model = "SAMA5D3 Ethernet Development System";
+	compatible = "microchip,sama5d3-eds", "atmel,sama5d36",
+		     "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		button-3 {
+			label = "PB_USER";
+			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+			wakeup-source;
+		};
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	vcc_3v3_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vcc_2v5_reg: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+		vin-supply = <&vcc_3v3_reg>;
+	};
+
+	vcc_1v8_reg: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vcc_3v3_reg>;
+	};
+
+	vcc_1v2_reg: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+	};
+
+	vcc_mmc0_reg: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc0-card-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
+		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	nand_controller: nand-controller {
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x2>;
+			atmel,rb = <0>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <4>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				bootloader@40000 {
+					label = "bootloader";
+					reg = <0x40000 0xc0000>;
+				};
+
+				bootloaderenvred@100000 {
+					label = "bootloader env redundant";
+					reg = <0x100000 0x40000>;
+				};
+
+				bootloaderenv@140000 {
+					label = "bootloader env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x0f800000>;
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&pinctrl_i2c0_pu>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&pinctrl_i2c2_pu>;
+	status = "okay";
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&mmc0 {
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3
+		     &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+	vmmc-supply = <&vcc_mmc0_reg>;
+	vqmmc-supply = <&vcc_3v3_reg>;
+	status = "okay";
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+		cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_i2c0_pu: i2c0-pu {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_i2c2_pu: i2c2-pu {
+			atmel,pins =
+				<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_key_gpio: key-gpio-0 {
+			atmel,pins =
+				<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		pinctrl_mmc0_cd: mmc0-cd {
+			atmel,pins =
+				<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		/* Reserved for reset signal to the RGMII connector. */
+		pinctrl_rgmii_rstn: rgmii-rstn {
+			atmel,pins =
+				<AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		/* Reserved for an interrupt line from the RMII and RGMII connectors. */
+		pinctrl_spi_irqn: spi-irqn {
+			atmel,pins =
+				<AT91_PIOB 28 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_spi0_cs: spi0-cs-default {
+			atmel,pins =
+				<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				 AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi1_cs: spi1-cs-default {
+			atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins =
+				<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_usb_default: usb-default {
+			atmel,pins =
+				<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				 AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		/* Reserved for VBUS fault interrupt. */
+		pinctrl_vbusfault_irqn: vbusfault-irqn {
+			atmel,pins =
+				<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_vcc_mmc0_reg_gpio: vcc-mmc0-reg-gpio-default {
+			atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&spi0 {
+	pinctrl-names = "default", "cs";
+	pinctrl-1 = <&pinctrl_spi0_cs>;
+	cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default", "cs";
+	pinctrl-1 = <&pinctrl_spi1_cs>;
+	cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioC 28 0>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {	/* USB Device port with VBUS detection. */
+	atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {	/* 3-port Host. First port is unused. */
+	atmel,vbus-gpio = <0
+			   &pioE 3 GPIO_ACTIVE_HIGH
+			   &pioE 4 GPIO_ACTIVE_HIGH
+			  >;
+	num-ports = <3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
new file mode 100644
index 000000000000..b66570080894
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+	model = "EVB-KSZ9477";
+	compatible = "microchip,sama5d3-ksz9477-evb", "atmel,sama5d36",
+		     "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = &dbgu;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vcc_mmc0: regulator-mmc0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mcc0_vcc>;
+		regulator-name = "mmc0-vcc";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&pinctrl_i2c0_pu>;
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rgmii";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&mmc0 {
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3
+		     &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+		cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+		disable-wp;
+		vmmc-supply = <&reg_vcc_mmc0>;
+		vqmmc-supply = <&reg_3v3>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&spi0 {
+	cs-gpios = <&pioD 13 GPIO_ACTIVE_LOW>, <0>, <0>,
+		   <&pioD 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-0 = <&pinctrl_spi_ksz>;
+	cs-gpios = <&pioC 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	switch@0 {
+		compatible = "microchip,ksz9477";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cpha;
+		spi-cpol;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+				phy-mode = "internal";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+				phy-mode = "internal";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+				phy-mode = "internal";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+				phy-mode = "internal";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan5";
+				phy-mode = "internal";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&macb0>;
+				phy-mode = "rgmii-txid";
+				tx-internal-delay-ps = <2000>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pinctrl {
+	board {
+		pinctrl_i2c0_pu: i2c0-pu {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_mmc0_cd: mmc0-cd {
+			atmel,pins = <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_mcc0_vcc: mmc0-vcc {
+			atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi_ksz: spi-ksz {
+			atmel,pins =
+				<
+				/* SPI1_MISO */
+				AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				/* SPI1_MOSI */
+				AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE
+				/* SPI1_SPCK */
+				AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE
+
+				/* SPI CS */
+				AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				/* switch IRQ */
+				AT91_PIOB 28 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH
+				/* switch PME_N, SoC IN */
+				AT91_PIOC 30 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP
+				/* switch RST */
+				AT91_PIOC 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH
+				>;
+		};
+
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins =
+				<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts
index 3af088d2cba7..d2c43957497d 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts
@@ -1,13 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
  *
  *  Copyright (C) 2014 Atmel,
  *		  2014 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "sama5d36.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "SAMA5D3 Xplained";
@@ -17,7 +17,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x10000000>;
 	};
 
@@ -57,6 +57,8 @@
 			};
 
 			spi0: spi@f0004000 {
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi0_cs>;
 				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
 				status = "okay";
 			};
@@ -65,6 +67,18 @@
 				status = "okay";
 			};
 
+			tcb0: timer@f0010000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
 			i2c0: i2c@f0014000 {
 				pinctrl-0 = <&pinctrl_i2c0_pu>;
 				status = "okay";
@@ -73,7 +87,7 @@
 			i2c1: i2c@f0018000 {
 				status = "okay";
 
-				pmic: act8865@5b {
+				act8865: pmic@5b {
 					compatible = "active-semi,act8865";
 					reg = <0x5b>;
 					status = "disabled";
@@ -117,7 +131,7 @@
 			};
 
 			macb0: ethernet@f0028000 {
-				phy-mode = "rgmii";
+				phy-mode = "rgmii-rxid";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "okay";
@@ -157,6 +171,8 @@
 			};
 
 			spi1: spi@f8008000 {
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi1_cs>;
 				cs-gpios = <&pioC 25 0>;
 				status = "okay";
 			};
@@ -231,27 +247,54 @@
 						atmel,pins =
 							<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PE9, conflicts with A9 */
 					};
+					pinctrl_usb_default: usb_default {
+						atmel,pins =
+							<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_gpio_leds: gpio_leds_default {
+						atmel,pins =
+							<AT91_PIOE 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_spi0_cs: spi0_cs_default {
+						atmel,pins =
+							<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_spi1_cs: spi1_cs_default {
+						atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_vcc_mmc0_reg_gpio: vcc_mmc0_reg_gpio_default {
+						atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 			};
 		};
 
-		usb0: gadget@00500000 {
+		usb0: gadget@500000 {
 			atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;	/* PE9, conflicts with A9 */
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usba_vbus>;
 			status = "okay";
 		};
 
-		usb1: ohci@00600000 {
+		usb1: usb@600000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0
 					   &pioE 3 GPIO_ACTIVE_LOW
 					   &pioE 4 GPIO_ACTIVE_LOW
 					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
 			status = "okay";
 		};
 
-		usb2: ehci@00700000 {
+		usb2: usb@700000 {
 			status = "okay";
 		};
 
@@ -285,12 +328,17 @@
 
 						bootloader@40000 {
 							label = "bootloader";
-							reg = <0x40000 0x80000>;
+							reg = <0x40000 0xc0000>;
+						};
+
+						bootloaderenvred@100000 {
+							label = "bootloader env redundant";
+							reg = <0x100000 0x40000>;
 						};
 
-						bootloaderenv@c0000 {
+						bootloaderenv@140000 {
 							label = "bootloader env";
-							reg = <0xc0000 0xc0000>;
+							reg = <0x140000 0x40000>;
 						};
 
 						dtb@180000 {
@@ -315,6 +363,8 @@
 
 	vcc_mmc0_reg: fixedregulator_mmc0 {
 		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
 		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
 		regulator-name = "mmc0-card-supply";
 		regulator-min-microvolt = <3300000>;
@@ -322,31 +372,34 @@
 		regulator-always-on;
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio>;
 
-		bp3 {
+		button {
 			label = "PB_USER";
 			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+		status = "okay";
 
-		d2 {
+		led-d2 {
 			label = "d2";
 			gpios = <&pioE 23 GPIO_ACTIVE_LOW>;	/* PE23, conflicts with A23, CTS2 */
 			linux,default-trigger = "heartbeat";
 		};
 
-		d3 {
-			label = "d3";
+		led-d3 {
+			label = "d3"; /* Conflict with EBI CS0, USART2 CTS. */
 			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
 		};
 	};
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4.dtsi
index b813fdfa2842..fd1086f52b40 100644
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4.dtsi
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright (C) 2015 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #include "sama5d4.dtsi"
@@ -15,7 +9,7 @@
 	model = "Aries/DENX MA5D4";
 	compatible = "aries,ma5d4", "denx,ma5d4", "atmel,sama5d4", "atmel,sama5";
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x10000000>;
 	};
 
@@ -55,7 +49,7 @@
 				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
 				status = "okay";
 
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
@@ -89,6 +83,18 @@
 				};
 			};
 
+			tcb2: timer@fc024000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
 			adc0: adc@fc034000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts
index 84be29f38dae..b9725e400501 100644
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright (C) 2015 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -21,14 +15,14 @@
 	};
 
 	ahb {
-		usb0: gadget@00400000 {
+		usb0: gadget@400000 {
 			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usba_vbus>;
 			status = "okay";
 		};
 
-		usb1: ohci@00500000 {
+		usb1: usb@500000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0
 					   &pioE 11 GPIO_ACTIVE_LOW
@@ -37,7 +31,7 @@
 			status = "okay";
 		};
 
-		usb2: ehci@00600000 {
+		usb2: usb@600000 {
 			status = "okay";
 		};
 
@@ -121,19 +115,19 @@
 		compatible = "gpio-leds";
 		status = "okay";
 
-		user1 {
+		led-user1 {
 			label = "user1";
 			gpios = <&pioD 28 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		user2 {
+		led-user2 {
 			label = "user2";
 			gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		user3 {
+		led-user3 {
 			label = "user3";
 			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -142,7 +136,7 @@
 
 	panel: panel {
 		/* Actually Ampire 800480R2 */
-		compatible = "foxlink,fl500wvr00-a0t", "simple-panel";
+		compatible = "foxlink,fl500wvr00-a0t";
 		backlight = <&backlight>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts
new file mode 100644
index 000000000000..0ecccb9a809d
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Josh Wu <josh.wu@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Atmel SAMA5D4 Xplained";
+	compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			uart0: serial@f8004000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			i2c0: i2c@f8014000 {
+				i2c-digital-filter;
+				status = "okay";
+			};
+
+			macb0: ethernet@f8020000 {
+				phy-mode = "rmii";
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&pioE>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+					reg = <1>;
+				};
+			};
+
+			mmc1: mmc@fc000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				vmmc-supply = <&vcc_mmc1_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 3 0>;
+				};
+			};
+
+			usart3: serial@fc00c000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			usart4: serial@fc010000 {
+				status = "okay";
+			};
+
+			spi1: spi@fc018000 {
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi1_cs>;
+				cs-gpios = <&pioB 21 0>;
+				status = "okay";
+			};
+
+			tcb2: timer@fc024000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				atmel,adc-vref = <3300>;
+				status = "okay";
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+					pinctrl_usb_default: usb_default {
+						atmel,pins =
+							<AT91_PIOE 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_key_gpio: key_gpio_0 {
+						atmel,pins =
+							<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_spi1_cs: spi1_cs_default {
+						atmel,pins =
+							<AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_gpio_leds: gpio_leds_default {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_vcc_mmc1_reg: vcc_mmc1_reg {
+						atmel,pins =
+							<AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+			};
+		};
+
+		usb0: gadget@400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: usb@500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 11 GPIO_ACTIVE_HIGH
+					   &pioE 14 GPIO_ACTIVE_HIGH
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: usb@600000 {
+			status = "okay";
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe
+				     &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy
+				     &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0xc0000>;
+						};
+
+						bootloaderenvred@100000 {
+							label = "bootloader env redundant";
+							reg = <0x100000 0x40000>;
+						};
+
+						bootloaderenv@140000 {
+							label = "bootloader env";
+							reg = <0x140000 0x40000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x1f800000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		button {
+			label = "pb_user1";
+			gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+		status = "okay";
+
+		led-d8 {
+			label = "d8";
+			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-d10 {
+			label = "d10";
+			gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vcc_3v3_reg: fixedregulator_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_mmc1_reg: fixedregulator_mmc1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc1_reg>;
+		gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
+		regulator-name = "VDD MCI1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_reg>;
+		regulator-always-on;
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts
new file mode 100644
index 000000000000..69107d6cd26c
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+	model = "Atmel SAMA5D4-EK";
+	compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				/* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */
+				atmel,adc-vref = <3300>;
+				/*atmel,adc-ts-wires = <4>;*/	/* Set up ADC touch screen */
+				status = "okay";		/* Enable ADC IIO support */
+			};
+
+			mmc0: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 5 0>;
+				};
+			};
+
+			ssc0: ssc@f8008000 {
+				status = "okay";
+			};
+
+			spi0: spi@f8010000 {
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+				flash@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+
+				wm8904: codec@1a {
+					compatible = "wlf,wm8904";
+					reg = <0x1a>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 10>;
+					clock-names = "mclk";
+				};
+
+				qt1070:keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioE>;
+					interrupts = <25 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+					wakeup-source;
+				};
+
+				touchscreen@4c {
+					compatible = "atmel,maxtouch";
+					reg = <0x4c>;
+					interrupt-parent = <&pioE>;
+					interrupts = <24 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_mxt_ts>;
+				};
+			};
+
+			macb0: ethernet@f8020000 {
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioE>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+
+			mmc1: mmc@fc000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 6 0>;
+				};
+			};
+
+			usart2: serial@fc008000 {
+				status = "okay";
+			};
+
+			usart3: serial@fc00c000 {
+				status = "okay";
+			};
+
+			usart4: serial@fc010000 {
+				status = "okay";
+			};
+
+			tcb2: timer@fc024000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_macb0_phy_irq: macb0_phy_irq {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOE 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_pck2_as_audio_mck: pck2_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+					pinctrl_key_gpio: key_gpio_0 {
+						atmel,pins =
+							<AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */
+					};
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOE 25 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_mxt_ts: mxt_irq {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+		};
+
+		usb0: gadget@400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: usb@500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */
+					   &pioE 11 GPIO_ACTIVE_LOW
+					   &pioE 12 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: usb@600000 {
+			status = "okay";
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe
+				     &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy
+				     &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0x80000>;
+						};
+
+						bootloaderenv@c0000 {
+							label = "bootloader env";
+							reg = <0xc0000 0xc0000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		button {
+			label = "pb_user1";
+			gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led-d8 {
+			label = "d8";
+			/* PE28, conflicts with usart4 rts pin */
+			gpios = <&pioE 28 GPIO_ACTIVE_LOW>;
+		};
+
+		led-d9 {
+			label = "d9";
+			gpios = <&pioE 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-d10 {
+			label = "d10";
+			gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck2_as_audio_mck>;
+
+		atmel,model = "wm8904 @ SAMA5D4EK";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN1L", "Line In Jack",
+			"IN1R", "Line In Jack";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
new file mode 100644
index 000000000000..927c27260b6c
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
@@ -0,0 +1,459 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *  at91-sama7d65_curiosity.dts - Device Tree file for SAMA7D65 Curiosity board
+ *
+ *  Copyright (c) 2024 Microchip Technology Inc. and its subsidiaries
+ *
+ *  Author: Romain Sioen <romain.sioen@microchip.com>
+ *
+ */
+/dts-v1/;
+#include "sama7d65-pinfunc.h"
+#include "sama7d65.dtsi"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Microchip SAMA7D65 Curiosity";
+	compatible = "microchip,sama7d65-curiosity", "microchip,sama7d65",
+		     "microchip,sama7d6", "microchip,sama7";
+
+	aliases {
+		serial0 = &uart6;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button {
+			label = "PB_USER";
+			gpios = <&pioa PIN_PC10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+
+		led0: led-red {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pioa PIN_PB17 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */
+		};
+
+		led1: led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pioa PIN_PB15 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */
+		};
+
+		led2: led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&pioa PIN_PA21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2_default>;
+	status = "okay";
+};
+
+&can3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can3_default>;
+	status = "okay";
+};
+
+&dma0 {
+	status = "okay";
+};
+
+&dma1 {
+	status = "okay";
+};
+
+&dma2 {
+	status = "okay";
+};
+
+&flx6 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6_default>;
+	status = "okay";
+};
+
+&flx10 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+};
+
+&gmac0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gmac0_default
+		     &pinctrl_gmac0_mdio_default
+		     &pinctrl_gmac0_txck_default
+		     &pinctrl_gmac0_phy_irq>;
+	phy-mode = "rgmii-id";
+	nvmem-cells = <&eeprom0_eui48>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+
+	ethernet-phy@7 {
+		reg = <0x7>;
+		interrupt-parent = <&pioa>;
+		interrupts = <PIN_PC1 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c10 {
+	dmas = <0>, <0>;
+	i2c-analog-filter;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c10_default>;
+	status = "okay";
+
+	power-monitor@10 {
+		compatible = "microchip,pac1934";
+		reg = <0x10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <0x1>;
+			shunt-resistor-micro-ohms = <47000>;
+			label = "VDD3V3";
+		};
+
+		channel@2 {
+			reg = <0x2>;
+			shunt-resistor-micro-ohms = <47000>;
+			label = "VDDIODDR";
+		};
+
+		channel@3 {
+			reg = <0x3>;
+			shunt-resistor-micro-ohms = <47000>;
+			label = "VDDCORE";
+		};
+
+		channel@4 {
+			reg = <0x4>;
+			shunt-resistor-micro-ohms = <47000>;
+			label = "VDDCPU";
+		};
+	};
+
+	pmic@5b {
+		compatible = "microchip,mcp16502";
+		reg = <0x5b>;
+		lvin-supply = <&reg_5v>;
+		pvin1-supply = <&reg_5v>;
+		pvin2-supply = <&reg_5v>;
+		pvin3-supply = <&reg_5v>;
+		pvin4-supply = <&reg_5v>;
+		status = "okay";
+
+		regulators {
+			vdd_3v3: VDD_IO {
+				regulator-name = "VDD_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddioddr: VDD_DDR {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1350000>;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1350000>;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddcore: VDD_CORE {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1050000>;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddcpu: VDD_OTHER {
+				regulator-name = "VDD_OTHER";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1050000>;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-suspend-microvolt = <1800000>;
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3700000>;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	eeprom0: eeprom@51 {
+		compatible = "microchip,24aa025e48";
+		reg = <0x51>;
+		size = <256>;
+		pagesize = <16>;
+		vcc-supply = <&vdd_3v3>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eeprom0_eui48: eui48@fa {
+				reg = <0xfa 0x6>;
+			};
+		};
+	};
+};
+
+&main_xtal {
+	clock-frequency = <24000000>;
+};
+
+&pioa {
+	pinctrl_can1_default: can1-default {
+		pinmux = <PIN_PD10__CANTX1>,
+			 <PIN_PD11__CANRX1>;
+		bias-disable;
+	};
+
+	pinctrl_can2_default: can2-default {
+		pinmux = <PIN_PD12__CANTX2>,
+			 <PIN_PD13__CANRX2>;
+		bias-disable;
+	};
+
+	pinctrl_can3_default: can3-default {
+		pinmux = <PIN_PD14__CANTX3>,
+			 <PIN_PD15__CANRX3>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_default: gmac0-default {
+		pinmux = <PIN_PA26__G0_TX0>,
+			 <PIN_PA27__G0_TX1>,
+			 <PIN_PB4__G0_TX2>,
+			 <PIN_PB5__G0_TX3>,
+			 <PIN_PA29__G0_RX0>,
+			 <PIN_PA30__G0_RX1>,
+			 <PIN_PB2__G0_RX2>,
+			 <PIN_PB6__G0_RX3>,
+			 <PIN_PA25__G0_TXCTL>,
+			 <PIN_PB3__G0_RXCK>,
+			 <PIN_PA28__G0_RXCTL>;
+		slew-rate = <0>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_mdio_default: gmac0-mdio-default {
+		pinmux = <PIN_PA31__G0_MDC>,
+			 <PIN_PB0__G0_MDIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_phy_irq: gmac0-phy-irq {
+		pinmux = <PIN_PC1__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_txck_default: gmac0-txck-default {
+		pinmux = <PIN_PB1__G0_REFCK>;
+		slew-rate = <0>;
+		bias-pull-up;
+	};
+
+	pinctrl_i2c10_default: i2c10-default {
+		pinmux = <PIN_PB19__FLEXCOM10_IO1>,
+			 <PIN_PB20__FLEXCOM10_IO0>;
+		bias-pull-up;
+	};
+
+	pinctrl_key_gpio_default: key-gpio-default {
+		pinmux = <PIN_PC10__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led-gpio-default {
+		pinmux = <PIN_PB15__GPIO>,
+			 <PIN_PB17__GPIO>,
+			 <PIN_PA21__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1-default {
+		cmd-data {
+			pinmux = <PIN_PB22__SDMMC1_CMD>,
+				 <PIN_PB24__SDMMC1_DAT0>,
+				 <PIN_PB25__SDMMC1_DAT1>,
+				 <PIN_PB26__SDMMC1_DAT2>,
+				 <PIN_PB27__SDMMC1_DAT3>;
+			slew-rate = <0>;
+			bias-disable;
+		};
+
+		ck-cd-rstn-vddsel {
+			pinmux = <PIN_PB23__SDMMC1_CK>,
+				 <PIN_PB21__SDMMC1_RSTN>,
+				 <PIN_PB30__SDMMC1_1V8SEL>,
+				 <PIN_PB29__SDMMC1_CD>,
+				 <PIN_PB28__SDMMC1_WP>;
+			slew-rate = <0>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart6_default: uart6-default {
+		pinmux = <PIN_PD18__FLEXCOM6_IO0>,
+			 <PIN_PD19__FLEXCOM6_IO1>;
+		bias-disable;
+	};
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	no-1-8-v;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	status = "okay";
+};
+
+&shdwc {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts
new file mode 100644
index 000000000000..eb5f27ce1942
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts
@@ -0,0 +1,558 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama7g54_curiosity.dts - Device Tree file for SAMA7G54 Curiosity Board
+ *
+ * Copyright (C) 2024 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Mihai Sain <mihai.sain@microchip.com>
+ *
+ */
+/dts-v1/;
+#include "sama7g5-pinfunc.h"
+#include "sama7g5.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Microchip SAMA7G54 Curiosity";
+	compatible = "microchip,sama7g54-curiosity", "microchip,sama7g5", "microchip,sama7";
+
+	aliases {
+		serial0 = &uart3;
+		i2c0 = &i2c10;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-user {
+			label = "user-button";
+			gpios = <&pioA PIN_PD19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+
+		led-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&pioA PIN_PD13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_BOOT;
+			gpios = <&pioA PIN_PD14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_CPU;
+			gpios = <&pioA PIN_PB15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x10000000>; /* 256 MiB DDR3L-1066 16-bit */
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&adc {
+	vddana-supply = <&vddout25>;
+	vref-supply = <&vddout25>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+};
+
+&dma0 {
+	status = "okay";
+};
+
+&dma1 {
+	status = "okay";
+};
+
+&dma2 {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand_default>;
+	status = "okay";
+
+	nand_controller: nand-controller {
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			atmel,rb = <0>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <8>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "nand: at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				bootloader@40000 {
+					label = "nand: u-boot";
+					reg = <0x40000 0x100000>;
+				};
+
+				bootloaderenv@140000 {
+					label = "nand: u-boot env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "nand: device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "nand: kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "nand: rootfs";
+					reg = <0x800000 0x1f800000>;
+				};
+			};
+		};
+	};
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart3: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx3_default>;
+		status = "okay";
+	};
+};
+
+&flx10 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c10: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx10_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		power-monitor@1f {
+			compatible = "microchip,pac1934";
+			reg = <0x1f>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@1 {
+				reg = <0x1>;
+				shunt-resistor-micro-ohms = <47000>;
+				label = "VDD3V3";
+			};
+
+			channel@2 {
+				reg = <0x2>;
+				shunt-resistor-micro-ohms = <47000>;
+				label = "VDDIODDR";
+			};
+
+			channel@3 {
+				reg = <0x3>;
+				shunt-resistor-micro-ohms = <47000>;
+				label = "VDDCORE";
+			};
+
+			channel@4 {
+				reg = <0x4>;
+				shunt-resistor-micro-ohms = <47000>;
+				label = "VDDCPU";
+			};
+		};
+
+		eeprom@51 {
+			compatible = "atmel,24c02";
+			reg = <0x51>;
+			pagesize = <16>;
+			size = <256>;
+			vcc-supply = <&vdd_3v3>;
+		};
+
+		pmic@5b {
+			compatible = "microchip,mcp16502";
+			reg = <0x5b>;
+			lvin-supply = <&reg_5v>;
+			pvin1-supply = <&reg_5v>;
+			pvin2-supply = <&reg_5v>;
+			pvin3-supply = <&reg_5v>;
+			pvin4-supply = <&reg_5v>;
+
+			regulators {
+				vdd_3v3: VDD_IO {
+					regulator-name = "VDD_IO";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <3300000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddioddr: VDD_DDR {
+					regulator-name = "VDD_DDR";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcore: VDD_CORE {
+					regulator-name = "VDD_CORE";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1150000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcpu: VDD_OTHER {
+					regulator-name = "VDD_OTHER";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-ramp-delay = <3125>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1050000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vldo1: LDO1 {
+					regulator-name = "LDO1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-suspend-microvolt = <1800000>;
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				vldo2: LDO2 {
+					regulator-name = "LDO2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-suspend-microvolt = <3300000>;
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+			};
+		};
+	};
+};
+
+&main_xtal {
+	clock-frequency = <24000000>;
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_default>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <100000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+		label = "at91-qspi";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			at91bootstrap@0 {
+				label = "qspi1: at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "qspi1: u-boot";
+				reg = <0x40000 0x100000>;
+			};
+
+			bootloaderenv@140000 {
+				label = "qspi1: u-boot env";
+				reg = <0x140000 0x40000>;
+			};
+
+			dtb@180000 {
+				label = "qspi1: device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "qspi1: kernel";
+				reg = <0x200000 0x600000>;
+			};
+		};
+	};
+};
+
+&pioA {
+	pinctrl_flx3_default: flx3-default {
+		pinmux = <PIN_PD16__FLEXCOM3_IO0>,
+			 <PIN_PD17__FLEXCOM3_IO1>;
+		bias-pull-up;
+	};
+
+	pinctrl_flx10_default: flx10-default {
+		pinmux = <PIN_PC30__FLEXCOM10_IO0>,
+			 <PIN_PC31__FLEXCOM10_IO1>;
+		bias-pull-up;
+	};
+
+	pinctrl_key_gpio_default: key-gpio-default {
+		pinmux = <PIN_PD19__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led-gpio-default {
+		pinmux = <PIN_PD13__GPIO>,
+			 <PIN_PD14__GPIO>,
+			 <PIN_PB15__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_mikrobus1_an_default: mikrobus1-an-default {
+		pinmux = <PIN_PC15__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_an_default: mikrobus2-an-default {
+		pinmux = <PIN_PC13__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_nand_default: nand-default {
+		pinmux = <PIN_PD9__D0>,
+			 <PIN_PD10__D1>,
+			 <PIN_PD11__D2>,
+			 <PIN_PC21__D3>,
+			 <PIN_PC22__D4>,
+			 <PIN_PC23__D5>,
+			 <PIN_PC24__D6>,
+			 <PIN_PD2__D7>,
+			 <PIN_PD3__NANDRDY>,
+			 <PIN_PD4__NCS3_NANDCS>,
+			 <PIN_PD5__NWE_NWR0_NANDWE>,
+			 <PIN_PD6__NRD_NANDOE>,
+			 <PIN_PD7__A21_NANDALE>,
+			 <PIN_PD8__A22_NANDCLE>;
+		bias-disable;
+		slew-rate = <0>;
+	};
+
+	pinctrl_qspi1_default: qspi1-default {
+		pinmux = <PIN_PB22__QSPI1_IO3>,
+			 <PIN_PB23__QSPI1_IO2>,
+			 <PIN_PB24__QSPI1_IO1>,
+			 <PIN_PB25__QSPI1_IO0>,
+			 <PIN_PB26__QSPI1_CS>,
+			 <PIN_PB27__QSPI1_SCK>;
+		bias-pull-up;
+		slew-rate = <0>;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0-default {
+		pinmux = <PIN_PA0__SDMMC0_CK>,
+			 <PIN_PA1__SDMMC0_CMD>,
+			 <PIN_PA2__SDMMC0_RSTN>,
+			 <PIN_PA3__SDMMC0_DAT0>,
+			 <PIN_PA4__SDMMC0_DAT1>,
+			 <PIN_PA5__SDMMC0_DAT2>,
+			 <PIN_PA6__SDMMC0_DAT3>;
+		bias-pull-up;
+		slew-rate = <0>;
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1-default {
+		pinmux = <PIN_PB29__SDMMC1_CMD>,
+			 <PIN_PB30__SDMMC1_CK>,
+			 <PIN_PB31__SDMMC1_DAT0>,
+			 <PIN_PC0__SDMMC1_DAT1>,
+			 <PIN_PC1__SDMMC1_DAT2>,
+			 <PIN_PC2__SDMMC1_DAT3>,
+			 <PIN_PC4__SDMMC1_CD>;
+		bias-pull-up;
+		slew-rate = <0>;
+	};
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+/* M.2 slot for wireless card */
+&sdmmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+/* micro SD socket */
+&sdmmc1 {
+	bus-width = <4>;
+	disable-wp;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	status = "okay";
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&shdwc {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&vddout25 {
+	vin-supply = <&vdd_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
new file mode 100644
index 000000000000..3924f62ff0fb
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
@@ -0,0 +1,917 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *  at91-sama7g5ek.dts - Device Tree file for SAMA7G5-EK board
+ *
+ *  Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries
+ *
+ *  Author: Eugen Hristev <eugen.hristev@microchip.com>
+ *  Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ *
+ */
+/dts-v1/;
+#include "sama7g5-pinfunc.h"
+#include "sama7g5.dtsi"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/sound/microchip,pdmc.h>
+
+/ {
+	model = "Microchip SAMA7G5-EK";
+	compatible = "microchip,sama7g5ek", "microchip,sama7g5", "microchip,sama7";
+
+	chosen {
+		bootargs = "rw root=/dev/mmcblk1p2 rootfstype=ext4 rootwait";
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart3;
+		serial1 = &uart4;
+		serial2 = &uart7;
+		serial3 = &uart0;
+		i2c0 = &i2c1;
+		i2c1 = &i2c8;
+		i2c2 = &i2c9;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button {
+			label = "PB_USER";
+			gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* Conflict with pwm. */
+
+		red_led {
+			label = "red";
+			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
+		};
+
+		green_led {
+			label = "green";
+			gpios = <&pioA PIN_PA13 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue_led {
+			label = "blue";
+			gpios = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* 512 M */
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x20000000>;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sama7g5ek audio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			cpu {
+				sound-dai = <&spdiftx>;
+			};
+			codec {
+				sound-dai = <&spdif_out>;
+			};
+		};
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			cpu {
+				sound-dai = <&spdifrx>;
+			};
+			codec {
+				sound-dai = <&spdif_in>;
+			};
+		};
+	};
+
+	spdif_in: spdif-in {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&adc {
+	vddana-supply = <&vddout25>;
+	vref-supply = <&vddout25>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>;
+	atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <133000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		m25p,fast-read;
+
+		at91bootstrap@0 {
+			label = "ospi: at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "ospi: bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "ospi: bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "ospi: bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "ospi: device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "ospi: kernel";
+			reg = <0x200000 0x600000>;
+		};
+
+		rootfs@800000 {
+			label = "ospi: rootfs";
+			reg = <0x800000 0x7800000>;
+		};
+
+	};
+};
+
+&dma0 {
+	status = "okay";
+};
+
+&dma1 {
+	status = "okay";
+};
+
+&dma2 {
+	status = "okay";
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "disabled";
+
+	uart0: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		status = "disabled";
+	};
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c1: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		power-monitor@10 {
+			compatible = "microchip,pac1934";
+			reg = <0x10>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@1 {
+				reg = <0x1>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDD3V3";
+			};
+
+			channel@2 {
+				reg = <0x2>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDIODDR";
+			};
+
+			channel@3 {
+				reg = <0x3>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDCORE";
+			};
+
+			channel@4 {
+				reg = <0x4>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDCPU";
+			};
+		};
+
+		pmic@5b {
+			compatible = "microchip,mcp16502";
+			reg = <0x5b>;
+			lvin-supply = <&reg_5v>;
+			pvin1-supply = <&reg_5v>;
+			pvin2-supply = <&reg_5v>;
+			pvin3-supply = <&reg_5v>;
+			pvin4-supply = <&reg_5v>;
+			status = "okay";
+
+			regulators {
+				vdd_3v3: VDD_IO {
+					regulator-name = "VDD_IO";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <3300000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddioddr: VDD_DDR {
+					regulator-name = "VDD_DDR";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcore: VDD_CORE {
+					regulator-name = "VDD_CORE";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1150000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcpu: VDD_OTHER {
+					regulator-name = "VDD_OTHER";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-ramp-delay = <3125>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1050000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vldo1: LDO1 {
+					regulator-name = "LDO1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-suspend-microvolt = <1800000>;
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				vldo2: LDO2 {
+					regulator-name = "LDO2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <3700000>;
+
+					regulator-state-standby {
+						regulator-suspend-microvolt = <1800000>;
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+			};
+		};
+	};
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart3: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx3_default>;
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart4: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		status = "okay";
+	};
+};
+
+&flx7 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart7: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx7_default>;
+		status = "okay";
+	};
+};
+
+&flx8 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c8: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c8_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		eeprom0: eeprom@52 {
+			compatible = "microchip,24aa025e48";
+			reg = <0x52>;
+			size = <256>;
+			pagesize = <16>;
+			vcc-supply = <&vdd_3v3>;
+
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				eeprom0_eui48: eui48@fa {
+					reg = <0xfa 0x6>;
+				};
+			};
+		};
+
+		eeprom1: eeprom@53 {
+			compatible = "microchip,24aa025e48";
+			reg = <0x53>;
+			size = <256>;
+			pagesize = <16>;
+			vcc-supply = <&vdd_3v3>;
+
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				eeprom1_eui48: eui48@fa {
+					reg = <0xfa 0x6>;
+				};
+			};
+		};
+	};
+};
+
+&flx9 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c9: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c9_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+	};
+};
+
+&flx11 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi11: spi@400 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>;
+		status = "okay";
+	};
+};
+
+&gmac0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gmac0_default
+		     &pinctrl_gmac0_mdio_default
+		     &pinctrl_gmac0_txck_default
+		     &pinctrl_gmac0_phy_irq>;
+	phy-mode = "rgmii-id";
+	nvmem-cells = <&eeprom0_eui48>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+
+	ethernet-phy@7 {
+		reg = <0x7>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PA31 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&gmac1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gmac1_default
+		     &pinctrl_gmac1_mdio_default
+		     &pinctrl_gmac1_phy_irq>;
+	phy-mode = "rmii";
+	nvmem-cells = <&eeprom1_eui48>;
+	nvmem-cell-names = "mac-address";
+	status = "okay"; /* Conflict with pdmc0. */
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PA21 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2s0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2s0_default>;
+};
+
+&main_xtal {
+	clock-frequency = <24000000>;
+};
+
+&pdmc0 {
+	#sound-dai-cells = <0>;
+	microchip,mic-pos = <MCHP_PDMC_DS0 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 1 */
+			    <MCHP_PDMC_DS1 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 2 */
+			    <MCHP_PDMC_DS0 MCHP_PDMC_CLK_POSITIVE>, /* MIC 3 */
+			    <MCHP_PDMC_DS1 MCHP_PDMC_CLK_POSITIVE>; /* MIC 4 */
+	status = "disabled"; /* Conflict with gmac1. */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdmc0_default>;
+};
+
+&pioA {
+
+	pinctrl_can0_default: can0_default {
+		pinmux = <PIN_PD12__CANTX0>,
+			 <PIN_PD13__CANRX0 >;
+		bias-disable;
+	};
+
+	pinctrl_can1_default: can1_default {
+		pinmux = <PIN_PD14__CANTX1>,
+			 <PIN_PD15__CANRX1 >;
+		bias-disable;
+	};
+
+	pinctrl_flx0_default: flx0_default {
+		pinmux = <PIN_PE3__FLEXCOM0_IO0>,
+			 <PIN_PE4__FLEXCOM0_IO1>,
+			 <PIN_PE6__FLEXCOM0_IO3>,
+			 <PIN_PE7__FLEXCOM0_IO4>;
+		bias-disable;
+	};
+
+	pinctrl_flx3_default: flx3_default {
+		pinmux = <PIN_PD16__FLEXCOM3_IO0>,
+			 <PIN_PD17__FLEXCOM3_IO1>;
+		bias-pull-up;
+	};
+
+	pinctrl_flx4_default: flx4_default {
+		pinmux = <PIN_PD18__FLEXCOM4_IO0>,
+			 <PIN_PD19__FLEXCOM4_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_flx7_default: flx7_default {
+		pinmux = <PIN_PC23__FLEXCOM7_IO0>,
+			 <PIN_PC24__FLEXCOM7_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_default: gmac0_default {
+		pinmux = <PIN_PA16__G0_TX0>,
+			 <PIN_PA17__G0_TX1>,
+			 <PIN_PA26__G0_TX2>,
+			 <PIN_PA27__G0_TX3>,
+			 <PIN_PA19__G0_RX0>,
+			 <PIN_PA20__G0_RX1>,
+			 <PIN_PA28__G0_RX2>,
+			 <PIN_PA29__G0_RX3>,
+			 <PIN_PA15__G0_TXEN>,
+			 <PIN_PA30__G0_RXCK>,
+			 <PIN_PA18__G0_RXDV>,
+			 <PIN_PA25__G0_125CK>;
+		slew-rate = <0>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_mdio_default: gmac0_mdio_default {
+		pinmux = <PIN_PA22__G0_MDC>,
+			 <PIN_PA23__G0_MDIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_txck_default: gmac0_txck_default {
+		pinmux = <PIN_PA24__G0_TXCK>;
+		slew-rate = <0>;
+		bias-pull-up;
+	};
+
+	pinctrl_gmac0_phy_irq: gmac0_phy_irq {
+		pinmux = <PIN_PA31__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac1_default: gmac1_default {
+		pinmux = <PIN_PD30__G1_TXCK>,
+			 <PIN_PD22__G1_TX0>,
+			 <PIN_PD23__G1_TX1>,
+			 <PIN_PD21__G1_TXEN>,
+			 <PIN_PD25__G1_RX0>,
+			 <PIN_PD26__G1_RX1>,
+			 <PIN_PD27__G1_RXER>,
+			 <PIN_PD24__G1_RXDV>;
+		slew-rate = <0>;
+		bias-disable;
+	};
+
+	pinctrl_gmac1_mdio_default: gmac1_mdio_default {
+		pinmux = <PIN_PD28__G1_MDC>,
+			 <PIN_PD29__G1_MDIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac1_phy_irq: gmac1_phy_irq {
+		pinmux = <PIN_PA21__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PC9__FLEXCOM1_IO0>,
+			 <PIN_PC10__FLEXCOM1_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c8_default: i2c8_default {
+		pinmux = <PIN_PC14__FLEXCOM8_IO0>,
+			 <PIN_PC13__FLEXCOM8_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c9_default: i2c9_default {
+		pinmux = <PIN_PC18__FLEXCOM9_IO0>,
+			 <PIN_PC19__FLEXCOM9_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_i2s0_default: i2s0_default {
+		pinmux = <PIN_PB23__I2SMCC0_CK>,
+			 <PIN_PB24__I2SMCC0_WS>,
+			 <PIN_PB25__I2SMCC0_DOUT1>,
+			 <PIN_PB26__I2SMCC0_DOUT0>,
+			 <PIN_PB27__I2SMCC0_MCK>;
+		bias-disable;
+	};
+
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PA12__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PA13__GPIO>,
+			 <PIN_PB8__GPIO>,
+			 <PIN_PD20__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_mikrobus1_an_default: mikrobus1_an_default {
+		pinmux = <PIN_PD0__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_an_default: mikrobus2_an_default {
+		pinmux = <PIN_PD1__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_pwm2_default: mikrobus1_pwm2_default {
+		pinmux = <PIN_PA13__PWMH2>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_pwm3_default: mikrobus2_pwm3_default {
+		pinmux = <PIN_PD20__PWMH3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
+		pinmux = <PIN_PB6__FLEXCOM11_IO3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi: mikrobus1_spi {
+		pinmux = <PIN_PB3__FLEXCOM11_IO0>,
+			 <PIN_PB4__FLEXCOM11_IO1>,
+			 <PIN_PB5__FLEXCOM11_IO2>;
+		bias-disable;
+	};
+
+	pinctrl_pdmc0_default: pdmc0_default {
+		pinmux = <PIN_PD23__PDMC0_DS0>,
+			 <PIN_PD24__PDMC0_DS1>,
+			 <PIN_PD22__PDMC0_CLK>;
+		bias_disable;
+	};
+
+	pinctrl_qspi: qspi {
+		pinmux = <PIN_PB12__QSPI0_IO0>,
+			 <PIN_PB11__QSPI0_IO1>,
+			 <PIN_PB10__QSPI0_IO2>,
+			 <PIN_PB9__QSPI0_IO3>,
+			 <PIN_PB16__QSPI0_IO4>,
+			 <PIN_PB17__QSPI0_IO5>,
+			 <PIN_PB18__QSPI0_IO6>,
+			 <PIN_PB19__QSPI0_IO7>,
+			 <PIN_PB13__QSPI0_CS>,
+			 <PIN_PB14__QSPI0_SCK>,
+			 <PIN_PB15__QSPI0_SCKN>,
+			 <PIN_PB20__QSPI0_DQS>,
+			 <PIN_PB21__QSPI0_INT>;
+		bias-disable;
+		slew-rate = <0>;
+		atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0_default {
+		cmd_data {
+			pinmux = <PIN_PA1__SDMMC0_CMD>,
+				 <PIN_PA3__SDMMC0_DAT0>,
+				 <PIN_PA4__SDMMC0_DAT1>,
+				 <PIN_PA5__SDMMC0_DAT2>,
+				 <PIN_PA6__SDMMC0_DAT3>,
+				 <PIN_PA7__SDMMC0_DAT4>,
+				 <PIN_PA8__SDMMC0_DAT5>,
+				 <PIN_PA9__SDMMC0_DAT6>,
+				 <PIN_PA10__SDMMC0_DAT7>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+
+		ck_cd_rstn_vddsel {
+			pinmux = <PIN_PA0__SDMMC0_CK>,
+				 <PIN_PA2__SDMMC0_RSTN>,
+				 <PIN_PA11__SDMMC0_DS>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1_default {
+		cmd_data {
+			pinmux = <PIN_PB29__SDMMC1_CMD>,
+				 <PIN_PB31__SDMMC1_DAT0>,
+				 <PIN_PC0__SDMMC1_DAT1>,
+				 <PIN_PC1__SDMMC1_DAT2>,
+				 <PIN_PC2__SDMMC1_DAT3>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+
+		ck_cd_rstn_vddsel {
+			pinmux = <PIN_PB30__SDMMC1_CK>,
+				 <PIN_PB28__SDMMC1_RSTN>,
+				 <PIN_PC5__SDMMC1_1V8SEL>,
+				 <PIN_PC4__SDMMC1_CD>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_sdmmc2_default: sdmmc2_default {
+		cmd_data {
+			pinmux = <PIN_PD3__SDMMC2_CMD>,
+				 <PIN_PD5__SDMMC2_DAT0>,
+				 <PIN_PD6__SDMMC2_DAT1>,
+				 <PIN_PD7__SDMMC2_DAT2>,
+				 <PIN_PD8__SDMMC2_DAT3>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+
+		ck {
+			pinmux = <PIN_PD4__SDMMC2_CK>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_spdifrx_default: spdifrx_default {
+		pinmux = <PIN_PB0__SPDIF_RX>;
+		bias-disable;
+	};
+
+	pinctrl_spdiftx_default: spdiftx_default {
+		pinmux = <PIN_PB1__SPDIF_TX>;
+		bias-disable;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_pwm2_default &pinctrl_mikrobus2_pwm3_default>;
+	status = "disabled"; /* Conflict with leds. */
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+&sdmmc0 {
+	bus-width = <8>;
+	non-removable;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vldo1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	no-1-8-v;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	bus-width = <4>;
+	no-1-8-v;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc2_default>;
+};
+
+&shdwc {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&spdifrx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdifrx_default>;
+	status = "okay";
+};
+
+&spdiftx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdiftx_default>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&vddout25 {
+	vin-supply = <&vdd_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-smartkiz.dts b/arch/arm/boot/dts/microchip/at91-smartkiz.dts
new file mode 100644
index 000000000000..b76a6b5ac464
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-smartkiz.dts
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017-2018 Overkiz SAS
+ *   Author: Mickael Gardet <m.gardet@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ *           Dorian Rocipon <d.rocipon@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz SmartKiz";
+	compatible = "overkiz,smartkiz", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+
+	clocks {
+		adc_op_clk {
+			status = "okay";
+		};
+	};
+
+	aliases {
+		serial5 = &uart0;
+	};
+
+	pio_keys {
+		hk_reset {
+			label = "HK_RESET";
+			gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_rf {
+			label = "POWER_RF";
+			gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_wifi {
+			label = "POWER_WIFI";
+			gpios = <&pioA 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	i2c1 {
+		pinctrl_i2c1: i2c1-0 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	adc0 {
+		pinctrl_adc0_ad0: adc0_ad0-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_adc0_ad5: adc0_ad5-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_adc0_ad6: adc0_ad6-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_adc0_ad11: adc0_ad11-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 10 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "disabled";
+};
+
+&macb0 {
+	status = "disabled";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&led_blue {
+	status = "okay";
+};
+
+&adc0 {
+	atmel,adc-vref = <2500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_adc0_ad0
+		&pinctrl_adc0_ad5
+		&pinctrl_adc0_ad6
+		&pinctrl_adc0_ad11
+	>;
+	atmel,adc-channels-used = <0x0861>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/microchip/at91-som60.dtsi b/arch/arm/boot/dts/microchip/at91-som60.dtsi
new file mode 100644
index 000000000000..39474a112b16
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-som60.dtsi
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-som60.dtsi - Device Tree file for the SOM60 module
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+#include "sama5d36.dtsi"
+
+/ {
+	model = "Laird SOM60";
+	compatible = "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = &dbgu;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_mmc0_cd: mmc0_cd {
+			atmel,pins =
+				<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_mmc0_en: mmc0_en {
+			atmel,pins =
+				<AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_nand0_wp: nand0_wp {
+			atmel,pins =
+				<AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_usb_vbus: usb_vbus {
+			atmel,pins =
+				<AT91_PIOE 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+				/* Conflicts with USART2_SCK */
+		};
+
+		pinctrl_usart2_sck: usart2_sck {
+			atmel,pins =
+				<AT91_PIOE 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+				/* Conflicts with USB_VBUS */
+		};
+
+		pinctrl_usb_oc: usb_oc {
+			atmel,pins =
+				<AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+				/* Conflicts with USART3_SCK */
+		};
+
+		pinctrl_usart3_sck: usart3_sck {
+			atmel,pins =
+				<AT91_PIOE 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+				/* Conflicts with USB_OC */
+		};
+
+		pinctrl_usba_vbus: usba_vbus {
+		   atmel,pins =
+				<AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_geth_int: geth_int {
+			atmel,pins =
+				<AT91_PIOB 25 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+				/* Conflicts with USART1_SCK */
+		};
+
+		pinctrl_usart1_sck: usart1_sck {
+			atmel,pins =
+				<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+				/* Conflicts with GETH_INT */
+		};
+
+		pinctrl_eth_int: eth_int {
+			atmel,pins =
+				<AT91_PIOC 10 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_pck2_as_audio_mck: pck2_as_audio_mck {
+			atmel,pins =
+				<AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&mmc0 {
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&spi0 {
+	cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+};
+
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
+};
+
+&usart1 {
+	pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+};
+
+&usart2 {
+	pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts_cts>;
+};
+
+&usart3 {
+	pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
+};
+
+&adc0 {
+	pinctrl-0 = <
+		&pinctrl_adc0_adtrg
+		&pinctrl_adc0_ad0
+		&pinctrl_adc0_ad1
+		&pinctrl_adc0_ad2
+		&pinctrl_adc0_ad3
+		&pinctrl_adc0_ad4
+		&pinctrl_adc0_ad5
+		>;
+};
+
+&macb0 {
+	phy-mode = "rgmii";
+};
+
+&macb1 {
+	phy-mode = "rmii";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand: nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ubootspl@0 {
+				label = "u-boot-spl";
+				reg = <0x0 0x20000>;
+			};
+
+			uboot@20000 {
+				label = "u-boot";
+				reg = <0x20000 0x80000>;
+			};
+
+			ubootenv@a0000 {
+				label = "u-boot-env";
+				reg = <0xa0000 0x20000>;
+			};
+
+			ubootenv@c0000 {
+				label = "u-boot-env";
+				reg = <0xc0000 0x20000>;
+			};
+
+			ubi@e0000 {
+				label = "ubi";
+				reg = <0xe0000 0xfe00000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	atmel,vbus-gpio = <&pioC 14 GPIO_ACTIVE_HIGH>;
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_vbus &pinctrl_usb_oc>;
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+		&pioE 20 GPIO_ACTIVE_HIGH
+		0>;
+	atmel,oc-gpio = <0
+		&pioE 15 GPIO_ACTIVE_LOW
+		0>;
+};
diff --git a/arch/arm/boot/dts/microchip/at91-tse850-3.dts b/arch/arm/boot/dts/microchip/at91-tse850-3.dts
new file mode 100644
index 000000000000..9d58a3931207
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-tse850-3.dts
@@ -0,0 +1,362 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-tse850-3.dts - Device Tree file for the Axentia TSE-850 3.0 board
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include "at91-linea.dtsi"
+
+/ {
+	model = "Axentia TSE-850 3.0";
+	compatible = "axentia,tse850v3", "axentia,linea",
+		     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	sck: oscillator {
+		compatible = "fixed-clock";
+
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+		clock-output-names = "sck";
+	};
+
+	reg_3v3: regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "3v3-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	ana: reg-ana {
+		compatible = "pwm-regulator";
+
+		regulator-name = "ANA";
+
+		pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>;
+		pwm-dutycycle-unit = <1000>;
+		pwm-dutycycle-range = <100 1000>;
+
+		regulator-min-microvolt = <2000000>;
+		regulator-max-microvolt = <20000000>;
+		regulator-ramp-delay = <1000>;
+	};
+
+	sound {
+		compatible = "axentia,tse850-pcm5142";
+
+		axentia,cpu-dai = <&ssc0>;
+		axentia,audio-codec = <&pcm5142>;
+
+		axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>;
+		axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+		axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>;
+
+		axentia,ana-supply = <&ana>;
+	};
+
+	dac: dpot-dac {
+		compatible = "dpot-dac";
+		vref-supply = <&reg_3v3>;
+		io-channels = <&dpot 0>;
+		io-channel-names = "dpot";
+		#io-channel-cells = <1>;
+	};
+
+	env_det: envelope-detector {
+		compatible = "axentia,tse850-envelope-detector";
+		io-channels = <&dac 0>;
+		io-channel-names = "dac";
+		#io-channel-cells = <1>;
+
+		interrupt-parent = <&pioA>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "comp";
+	};
+
+	mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+			    <&pioA 1 GPIO_ACTIVE_HIGH>,
+			    <&pioA 2 GPIO_ACTIVE_HIGH>;
+		idle-state = <0>;
+	};
+
+	envelope-detector-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&env_det 0>;
+		io-channel-names = "parent";
+
+		mux-controls = <&mux>;
+
+		channels = "", "",
+			 "sync-1",
+			 "in",
+			 "out",
+			 "sync-2",
+			 "sys-reg",
+			 "ana-reg";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-ch1-red {
+			label = "ch-1:red";
+			gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+		};
+		led-ch1-green {
+			label = "ch-1:green";
+			gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
+		};
+		led-ch2-red {
+			label = "ch-2:red";
+			gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
+		};
+		led-ch2-green {
+			label = "ch-2:green";
+			gpios = <&pioA 20 GPIO_ACTIVE_LOW>;
+		};
+		led-data-red {
+			label = "data:red";
+			gpios = <&pioA 19 GPIO_ACTIVE_LOW>;
+		};
+		led-data-green {
+			label = "data:green";
+			gpios = <&pioA 18 GPIO_ACTIVE_LOW>;
+		};
+		led-alarm-red {
+			label = "alarm:red";
+			gpios = <&pioA 17 GPIO_ACTIVE_LOW>;
+		};
+		led-alarm-green {
+			label = "alarm:green";
+			gpios = <&pioA 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&nand {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		at91bootstrap@0 {
+			label = "at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		barebox@40000 {
+			label = "bootloader";
+			reg = <0x40000 0x60000>;
+		};
+
+		bareboxenv@c0000 {
+			label = "bareboxenv";
+			reg = <0xc0000 0x40000>;
+		};
+
+		bareboxenv2@100000 {
+			label = "bareboxenv2";
+			reg = <0x100000 0x40000>;
+		};
+
+		oftree@180000 {
+			label = "oftree";
+			reg = <0x180000 0x20000>;
+		};
+
+		kernel@200000 {
+			label = "kernel";
+			reg = <0x200000 0x500000>;
+		};
+
+		rootfs@800000 {
+			label = "rootfs";
+			reg = <0x800000 0x0f800000>;
+		};
+
+		ovlfs@10000000 {
+			label = "ovlfs";
+			reg = <0x10000000 0x10000000>;
+		};
+	};
+};
+
+&ssc0 {
+	#sound-dai-cells = <0>;
+
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	jc42@18 {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x18>;
+		smbus-timeout-disable;
+	};
+
+	dpot: mcp4651-104@28 {
+		compatible = "microchip,mcp4651-104";
+		reg = <0x28>;
+		#io-channel-cells = <1>;
+	};
+
+	pcm5142: pcm5142@4c {
+		compatible = "ti,pcm5142";
+
+		reg = <0x4c>;
+		#sound-dai-cells = <0>;
+
+		AVDD-supply = <&reg_3v3>;
+		DVDD-supply = <&reg_3v3>;
+		CPVDD-supply = <&reg_3v3>;
+
+		clocks = <&sck>;
+
+		pll-in = <3>;
+		pll-out = <6>;
+	};
+
+	eeprom@50 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&pinctrl {
+	tse850 {
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins = <AT91_PIOC 31 AT91_PERIPH_GPIO
+				      AT91_PINCTRL_DEGLITCH>;
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&usart0 {
+	status = "okay";
+
+	atmel,use-dma-rx;
+};
+
+&pwm0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_pwm0_pwml2_1>;
+	pinctrl-names = "default";
+};
+
+&macb1 {
+	status = "okay";
+
+	phy-mode = "rmii";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	phy0: ethernet-phy@3 {
+		reg = <3>;
+
+		interrupt-parent = <&pioE>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	atmel,vbus-gpio = <&pioC 31 GPIO_ACTIVE_HIGH>;
+};
+
+&usb1 {
+	status = "okay";
+
+	num-ports = <1>;
+	atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
+	atmel,oc-gpio = <&pioC 15 GPIO_ACTIVE_LOW>;
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+
+	dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+};
+
+&pioA {
+	gpio-line-names =
+	/*  0 */	"SUP-A", "SUP-B", "SUP-C", "SIG<LEV",
+	/*  4 */	"", "/RFRST", "", "",
+	/*  8 */	"/ADD", "", "/LOOP1", "/LOOP2",
+	/* 12 */	"", "", "", "",
+	/* 16 */	"LED1GREEN", "LED1RED", "LED2GREEN", "LED2RED",
+	/* 20 */	"LED3GREEN", "LED3RED", "LED4GREEN", "LED4RED",
+	/* 24 */	"", "", "", "",
+	/* 28 */	"", "", "SDA", "SCL";
+};
+
+&pioB {
+	gpio-line-names =
+	/*  0 */	"", "", "", "",
+	/*  4 */	"", "", "", "",
+	/*  8 */	"", "", "", "",
+	/* 12 */	"", "", "", "",
+	/* 16 */	"", "", "", "",
+	/* 20 */	"", "", "", "",
+	/* 24 */	"", "", "SIG<LIN", "SIG>LIN",
+	/* 28 */	"RXD", "TXD", "BRX", "BTX";
+};
+
+&pioC {
+	gpio-line-names =
+	/*  0 */	"ETX0", "ETX1", "ERX0", "ERX1",
+	/*  4 */	"ETXEN", "ECRSDV", "ERXER", "EREFCK",
+	/*  8 */	"EMDC", "EMDIO", "", "",
+	/* 12 */	"", "", "", "/ILIM",
+	/* 16 */	"BCK", "LRCK", "DIN", "",
+	/* 20 */	"", "", "", "",
+	/* 24 */	"", "", "", "",
+	/* 28 */	"", "", "", "VBUS";
+};
+
+&pioD {
+	gpio-line-names =
+	/*  0 */	"I1", "I2", "O1", "EXTVEN",
+	/*  4 */	"", "456KHZ", "VCTRL", "SYNCSEL",
+	/*  8 */	"STEREO", "", "", "",
+	/* 12 */	"", "", "", "",
+	/* 16 */	"", ">LIN", "LIN>", "",
+	/* 20 */	"VREFEN", "", "", "",
+	/* 24 */	"", "", "VINOK", "",
+	/* 28 */	"POEOK", "USBON", "POELOAD", "";
+};
+
+&pioE {
+	gpio-line-names =
+	/*  0 */	"", "", "", "",
+	/*  4 */	"", "", "", "",
+	/*  8 */	"", "", "", "",
+	/* 12 */	"", "", "", "",
+	/* 16 */	"", "", "", "",
+	/* 20 */	"", "ALE", "CLE", "",
+	/* 24 */	"", "", "", "",
+	/* 28 */	"", "", "", "/ETHINT";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-vinco.dts b/arch/arm/boot/dts/microchip/at91-vinco.dts
new file mode 100644
index 000000000000..c5fc51667066
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-vinco.dts
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for VInCo platform
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *   2015 Gregory CLEMENT <gregory.clement@free-electrons.com>
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+	model = "L+G VInCo platform";
+	compatible = "l+g,vinco", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+
+			adc0: adc@fc034000 {
+				status = "okay"; /* Enable ADC IIO support */
+			};
+
+			mmc0: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0
+					     &pinctrl_mmc0_dat1_3
+					     &pinctrl_mmc0_dat4_7>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				vmmc-supply = <&vcc_3v3_reg>;
+				no-1-8-v;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <8>;
+					non-removable;
+					broken-cd;
+					status = "okay";
+				};
+			};
+
+			spi0: spi@f8010000 {
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+				flash@0 {
+					compatible = "n25q32b", "jedec,spi-nor";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f8018000 {
+				status = "okay";
+				/* kerkey security module */
+			};
+
+			macb0: ethernet@f8020000 {
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					reset-gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
+					interrupt-parent = <&pioB>;
+					interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+				};
+
+			};
+
+			i2c2: i2c@f8024000 {
+				status = "okay";
+
+				rtc1: rtc@32 {
+					compatible = "epson,rx8900";
+					reg = <0x32>;
+				};
+			};
+
+			usart2: serial@fc008000 {
+				/* MBUS */
+				status = "okay";
+			};
+
+			usart3: serial@fc00c000 {
+				/* debug */
+				status = "okay";
+			};
+
+			usart4: serial@fc010000 {
+				/* LMN */
+				pinctrl-0 = <&pinctrl_usart4 &pinctrl_usart4_rts>;
+				linux,rs485-enabled-at-boot-time;
+				status = "okay";
+			};
+
+			tcb2: timer@fc024000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			macb1: ethernet@fc028000 {
+				phy-mode = "rmii";
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+					reset-gpios = <&pioE 6 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+						<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+				};
+			};
+		};
+
+		usb0: gadget@400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "disabled";
+		};
+
+		usb1: usb@500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 11 GPIO_ACTIVE_LOW
+					   &pioE 12 GPIO_ACTIVE_LOW
+					  >;
+			status = "disabled";
+		};
+
+		usb2: usb@600000 {
+			/* 4G Modem */
+			status = "okay";
+		};
+
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led_err {
+			label = "err";
+			gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_rssi {
+			label = "rssi";
+			gpios = <&pioA 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_tls {
+			label = "tls";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_lmc {
+			label = "lmc";
+			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_wmt {
+			label = "wmt";
+			gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_pwr {
+			label = "pwr";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+	};
+
+	vcc_3v3_reg: fixedregulator_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91-wb45n.dts b/arch/arm/boot/dts/microchip/at91-wb45n.dts
new file mode 100644
index 000000000000..ef73f727f7bd
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-wb45n.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb45n.dts - Device Tree file for WB45NBT board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+/dts-v1/;
+#include "at91-wb45n.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
+	compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button {
+			label = "IRQBTN";
+			linux,code = <99>;
+			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&macb0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&usart0 {
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-wb45n.dtsi b/arch/arm/boot/dts/microchip/at91-wb45n.dtsi
new file mode 100644
index 000000000000..430c75358086
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-wb45n.dtsi
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb45n.dtsi - Device Tree file for WB45NBT board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+
+#include "at91sam9g25.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
+	compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	atheros {
+		compatible = "atheros,ath6kl";
+		atheros,board-id = "SD32";
+	};
+};
+
+&reset_controller {
+	compatible = "atmel,sama5d3-rstc";
+};
+
+&shutdown_controller {
+	atmel,wakeup-mode = "low";
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&ebi {
+	status = "okay";
+	nand_controller: nand-controller {
+		pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb &pinctrl_nand_oe_we>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <4>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bs";
+					reg = <0x0 0x20000>;
+				};
+
+				uboot@20000 {
+					label = "u-boot";
+					reg = <0x20000 0x80000>;
+				};
+
+				ubootenv@a0000 {
+					label = "u-boot-env";
+					reg = <0xa0000 0x20000>;
+				};
+
+				ubootenv@c0000 {
+					label = "redund-env";
+					reg = <0xc0000 0x20000>;
+				};
+
+				kernel-a@e0000 {
+					label = "kernel-a";
+					reg = <0xe0000 0x280000>;
+				};
+
+				kernel-b@360000 {
+					label = "kernel-b";
+					reg = <0x360000 0x280000>;
+				};
+
+				rootfs-a@5e0000 {
+					label = "rootfs-a";
+					reg = <0x5e0000 0x2600000>;
+				};
+
+				rootfs-b@2be0000 {
+					label = "rootfs-b";
+					reg = <0x2be0000 0x2600000>;
+				};
+
+				user@51e0000 {
+					label = "user";
+					reg = <0x51e0000 0x2dc0000>;
+				};
+
+				logs@7fa0000 {
+					label = "logs";
+					reg = <0x7fa0000 0x60000>;
+				};
+
+			};
+		};
+	};
+};
+
+&usb0 {
+	num-ports = <2>;
+	atmel,vbus-gpio = <
+		&pioB 12 GPIO_ACTIVE_HIGH
+		&pioA 31 GPIO_ACTIVE_HIGH
+		>;
+	atmel,oc-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
+};
+
+&macb0 {
+	phy-mode = "rmii";
+};
+
+&spi0 {
+	cs-gpios = <&pioA 14 0>, <&pioA 7 0>, <0>, <0>;
+};
+
+&usb2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_board_usb2>;
+	atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&pinctrl {
+	usb2 {
+		pinctrl_board_usb2: usb2-board {
+			atmel,pins =
+				<AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB11 gpio vbus sense, deglitch */
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/microchip/at91-wb50n.dts b/arch/arm/boot/dts/microchip/at91-wb50n.dts
new file mode 100644
index 000000000000..ec2becf6133b
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-wb50n.dts
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb50n.dts - Device Tree file for wb50n evaluation board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+
+/dts-v1/;
+#include "at91-wb50n.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
+	compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			label = "BTNESC";
+			linux,code = <1>; /* ESC button */
+			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-1 {
+			label = "IRQBTN";
+			linux,code = <99>; /* SysReq button */
+			gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "wb50n:blue:led0";
+			gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led1 {
+			label = "wb50n:green:led1";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "wb50n:red:led2";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&macb1 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+/* On BB40 this port is labeled UART1 */
+&usart0 {
+	status = "okay";
+};
+
+/* On BB40 this port is labeled UART0 */
+&usart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/microchip/at91-wb50n.dtsi b/arch/arm/boot/dts/microchip/at91-wb50n.dtsi
new file mode 100644
index 000000000000..74b249bb6351
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-wb50n.dtsi
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb50n.dtsi - Device Tree include file for wb50n cpu module
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+
+#include "sama5d31.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
+	compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_mmc0_cd: mmc0_cd {
+			atmel,pins = <AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC26 GPIO with pullup deglitch */
+		};
+
+		pinctrl_usba_vbus: usba_vbus {
+			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB13 GPIO with deglitch */
+		};
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&clk32k {
+	atmel,osc-bypass;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+	cd-gpios = <&pioC 26 GPIO_ACTIVE_LOW>;
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+	status = "okay";
+	atheros@0 {
+		compatible = "atheros,ath6kl";
+		atheros,board-id = "SD32";
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&macb1 {
+	phy-mode = "rmii";
+};
+
+&dbgu {
+	dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+};
+
+/* On BB40 this port is labeled UART1 */
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
+};
+
+/* On BB40 this port is labeled UART0 */
+&usart1 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+	dtr-gpios = <&pioD 13 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&pioD 11 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&pioD 7 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&pioD 8 GPIO_ACTIVE_LOW>;
+};
+
+/* USART3 is direct-connect to the Bluetooth UART on the radio SIP */
+&usart3 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
+	status = "okay";
+};
+
+&spi1 {
+	cs-gpios = <&pioC 25 0>, <0>, <0>, <0>;
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand: nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			at91bootstrap@0 {
+				label = "at91bs";
+				reg = <0x0 0x20000>;
+			};
+
+			uboot@20000 {
+				label = "u-boot";
+				reg = <0x20000 0x80000>;
+			};
+
+			ubootenv@a0000 {
+				label = "u-boot-env";
+				reg = <0xa0000 0x20000>;
+			};
+
+			ubootenv@c0000 {
+				label = "u-boot-env";
+				reg = <0xc0000 0x20000>;
+			};
+
+			kernel-a@e0000 {
+				label = "kernel-a";
+				reg = <0xe0000 0x500000>;
+			};
+
+			kernel-b@5e0000 {
+				label = "kernel-b";
+				reg = <0x5e0000 0x500000>;
+			};
+
+			rootfs-a@ae0000 {
+				label = "rootfs-a";
+				reg = <0xae0000 0x3000000>;
+			};
+
+			rootfs-b@3ae0000 {
+				label = "rootfs-b";
+				reg = <0x3ae0000 0x3000000>;
+			};
+
+			user@6ae0000 {
+				label = "user";
+				reg = <0x6ae0000 0x14e0000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <&pioA 2 GPIO_ACTIVE_LOW>;
+	atmel,oc-gpio = <&pioA 4 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/microchip/at91rm9200.dtsi b/arch/arm/boot/dts/microchip/at91rm9200.dtsi
new file mode 100644
index 000000000000..e105ad855ce8
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91rm9200.dtsi
@@ -0,0 +1,728 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91rm9200.dtsi - Device Tree Include file for AT91RM9200 family SoC
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
+ *                2012 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Based on at91sam9260.dtsi
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91RM9200 family SoC";
+	compatible = "atmel,at91rm9200";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		ssc2 = &ssc2;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm920t";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x04000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	sram: sram@200000 {
+		compatible = "mmio-sram";
+		reg = <0x00200000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00200000 0x4000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <25 26 27 28 29 30 31>;
+			};
+
+			ramc0: ramc@ffffff00 {
+				compatible = "atmel,at91rm9200-sdramc", "syscon";
+				reg = <0xffffff00 0x100>;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91rm9200-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&slow_xtal>, <&main_xtal>;
+				clock-names = "slow_xtal", "main_xtal";
+			};
+
+			st: timer@fffffd00 {
+				compatible = "atmel,at91rm9200-st", "syscon", "simple-mfd";
+				reg = <0xfffffd00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+
+				watchdog {
+					compatible = "atmel,at91rm9200-wdt";
+				};
+			};
+
+			rtc: rtc@fffffe00 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffe00 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffa0000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			tcb1: timer@fffa4000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffa4000 0x100>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <21 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <22 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&slow_xtal>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			i2c0: i2c@fffb8000 {
+				compatible = "atmel,at91rm9200-i2c";
+				reg = <0xfffb8000 0x4000>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_twi>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			mmc0: mmc@fffb4000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffb4000 0x4000>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				clock-names = "mci_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffd0000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffd0000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffd4000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffd4000 0x4000>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc2: ssc@fffd8000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffd8000 0x4000>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			macb0: ethernet@fffbc000 {
+				compatible = "cdns,at91rm9200-emac", "cdns,emac";
+				reg = <0xfffbc000 0x4000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				phy-mode = "rmii";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb_rmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "ether_clk";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				atmel,mux-mask = <
+					/*    A         B     */
+					 0xffffffff 0xffffffff  /* pioA */
+					 0xffffffff 0x083fffff  /* pioB */
+					 0xffff3fff 0x00000000  /* pioC */
+					 0x03ff87ff 0x0fffff80  /* pioD */
+					>;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_uart0_cts: uart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA20 periph A */
+					};
+
+					pinctrl_uart0_rts: uart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA21 periph A */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_uart1_rts: uart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB24 periph A */
+					};
+
+					pinctrl_uart1_cts: uart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB26 periph A */
+					};
+
+					pinctrl_uart1_dtr_dsr: uart1_dtr_dsr-0 {
+						atmel,pins =
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB19 periph A */
+							 AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB25 periph A */
+					};
+
+					pinctrl_uart1_dcd: uart1_dcd-0 {
+						atmel,pins =
+							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB23 periph A */
+					};
+
+					pinctrl_uart1_ri: uart1_ri-0 {
+						atmel,pins =
+							<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A */
+					};
+				};
+
+				uart2 {
+					pinctrl_uart2: uart2-0 {
+						atmel,pins =
+							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_uart2_rts: uart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA30 periph B */
+					};
+
+					pinctrl_uart2_cts: uart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA31 periph B */
+					};
+				};
+
+				uart3 {
+					pinctrl_uart3: uart3-0 {
+						atmel,pins =
+							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_uart3_rts: uart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
+					};
+
+					pinctrl_uart3_cts: uart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP	/* PC2 gpio RDY pin pull_up */
+							 AT91_PIOB 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PB1 gpio CD pin pull_up */
+					};
+				};
+
+				macb {
+					pinctrl_macb_rmii: macb_rmii-0 {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA7 periph A */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA8 periph A */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA9 periph A */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA10 periph A */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA16 periph A */
+					};
+
+					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB12 periph B */
+							 AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB13 periph B */
+							 AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB14 periph B */
+							 AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB15 periph B */
+							 AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB16 periph B */
+							 AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB17 periph B */
+							 AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB18 periph B */
+							 AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB19 periph B */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA27 periph A */
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA28 periph A with pullup */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA29 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PB3 periph B with pullup */
+							 AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PB4 periph B with pullup */
+							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PB5 periph B with pullup */
+					};
+
+					pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA8 periph B with pullup */
+							 AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA9 periph B with pullup */
+					};
+
+					pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA10 periph B with pullup */
+							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA11 periph B with pullup */
+							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA12 periph B with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB2 periph A */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB5 periph A */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+							 AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB8 periph A */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB10 periph A */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB11 periph A */
+					};
+				};
+
+				ssc2 {
+					pinctrl_ssc2_tx: ssc2_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB14 periph A */
+					};
+
+					pinctrl_ssc2_rx: ssc2_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB17 periph A */
+					};
+				};
+
+				twi {
+					pinctrl_twi: twi-0 {
+						atmel,pins =
+							<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE	/* PA25 periph A with multi drive */
+							 AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>;	/* PA26 periph A with multi drive */
+					};
+
+					pinctrl_twi_gpio: twi_gpio-0 {
+						atmel,pins =
+							<AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PA25 GPIO with multi drive */
+							 AT91_PIOA 26 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PA26 GPIO with multi drive */
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A SPI0_MISO pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA1 periph A SPI0_MOSI pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A SPI0_SPCK pin */
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart";
+				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart0: serial@fffc0000 {
+				compatible = "atmel,at91rm9200-usart";
+				reg = <0xfffc0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffc4000 {
+				compatible = "atmel,at91rm9200-usart";
+				reg = <0xfffc4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffc8000 {
+				compatible = "atmel,at91rm9200-usart";
+				reg = <0xfffc8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fffcc000 {
+				compatible = "atmel,at91rm9200-usart";
+				reg = <0xfffcc000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usb1: gadget@fffb0000 {
+				compatible = "atmel,at91rm9200-udc";
+				reg = <0xfffb0000 0x4000>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 1>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffe0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffe0000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000>;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			nand-ecc-mode = "soft";
+			gpios = <&pioC 2 GPIO_ACTIVE_HIGH
+				 0
+				 &pioB 1 GPIO_ACTIVE_HIGH
+				>;
+			status = "disabled";
+		};
+
+		usb0: usb@300000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00300000 0x100000>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_SYSTEM 4>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pioA 25 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 26 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_twi_gpio>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91rm9200_pqfp.dtsi b/arch/arm/boot/dts/microchip/at91rm9200_pqfp.dtsi
index 93ca66f80360..c3d4177b9823 100644
--- a/arch/arm/boot/dts/at91rm9200_pqfp.dtsi
+++ b/arch/arm/boot/dts/microchip/at91rm9200_pqfp.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91rm9200_pqfp.dtsi - Device Tree Include file for AT91RM9200 PQFP family SoC
  *
  * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2 or later.
  */
 
 #include "at91rm9200.dtsi"
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/microchip/at91rm9200ek.dts
index f90e1c2d3caa..ce691c4692b9 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/microchip/at91rm9200ek.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91rm9200ek.dts - Device Tree file for Atmel AT91RM9200 evaluation kit
  *
  *  Copyright (C) 2012 Joachim Eastwood <manabian@gmail.com>
- *
- * Licensed under GPLv2 only
  */
 /dts-v1/;
 #include "at91rm9200.dtsi"
@@ -16,7 +15,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x4000000>;
 	};
 
@@ -32,6 +31,18 @@
 
 	ahb {
 		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			usb1: gadget@fffb0000 {
 				atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
 				atmel,pullup-gpio = <&pioD 5 GPIO_ACTIVE_HIGH>;
@@ -62,7 +73,7 @@
 			spi0: spi@fffe0000 {
 				status = "okay";
 				cs-gpios = <&pioA 3 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <15000000>;
 					reg = <0>;
@@ -78,12 +89,12 @@
 			};
 		};
 
-		usb0: ohci@00300000 {
+		usb0: usb@300000 {
 			num-ports = <2>;
 			status = "okay";
 		};
 
-		nor_flash@10000000 {
+		flash@10000000 {
 			compatible = "cfi-flash";
 			reg = <0x10000000 0x800000>;
 			linux,mtd-name = "physmap-flash.0";
@@ -116,19 +127,19 @@
 	leds {
 		compatible = "gpio-leds";
 
-		ds2 {
+		led-ds2 {
 			label = "green";
 			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "mmc0";
 		};
 
-		ds4 {
+		led-ds4 {
 			label = "yellow";
 			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		ds6 {
+		led-ds6 {
 			label = "red";
 			gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/microchip/at91sam9260.dtsi b/arch/arm/boot/dts/microchip/at91sam9260.dtsi
new file mode 100644
index 000000000000..fc0b6a73204f
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9260.dtsi
@@ -0,0 +1,795 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
+ *                2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9260 family SoC";
+	compatible = "atmel,at91sam9260";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		serial5 = &uart0;
+		serial6 = &uart1;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		ssc0 = &ssc0;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x04000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <5000000>;
+		};
+	};
+
+	sram0: sram@2ff000 {
+		compatible = "mmio-sram";
+		reg = <0x002ff000 0x2000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x002ff000 0x2000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <29 30 31>;
+			};
+
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			smc: smc@ffffec00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffec00 0x200>;
+			};
+
+			matrix: matrix@ffffee00 {
+				compatible = "atmel,at91sam9260-matrix", "syscon";
+				reg = <0xffffee00 0x200>;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9260-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&slow_xtal>, <&main_xtal>;
+				clock-names = "slow_xtal", "main_xtal";
+			};
+
+			reset-controller@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
+			};
+
+			shdwc: poweroff@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffa0000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&pmc PMC_TYPE_CORE PMC_SLOW>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			tcb1: timer@fffdc000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffdc000 0x100>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <27 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <28 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 28>, <&pmc PMC_TYPE_CORE PMC_SLOW>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			pinctrl: pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
+				ranges = <0xfffff400 0xfffff400 0x600>;
+
+				atmel,mux-mask = <
+				      /*    A         B     */
+				       0xffffffff 0xffc00c3b  /* pioA */
+				       0xffffffff 0x7fff3ccf  /* pioB */
+				       0xffffffff 0x007fffff  /* pioC */
+				      >;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB26 periph A */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB27 periph A */
+					};
+
+					pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB24 periph A */
+							 AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB22 periph A */
+					};
+
+					pinctrl_usart0_dcd: usart0_dcd-0 {
+						atmel,pins =
+							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB23 periph A */
+					};
+
+					pinctrl_usart0_ri: usart0_ri-0 {
+						atmel,pins =
+							<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB25 periph A */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB28 periph A */
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB29 periph A */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA4 periph A */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA5 periph A */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOC 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							 <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				macb {
+					pinctrl_macb_rmii: macb_rmii-0 {
+						atmel,pins =
+							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA16 periph A */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA18 periph A */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA19 periph A */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA20 periph A */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA21 periph A */
+					};
+
+					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B */
+							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA23 periph B */
+							 AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
+							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
+							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA26 periph B */
+							 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
+					};
+
+					pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA10 periph B */
+							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA11 periph B */
+							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B */
+							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
+							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA26 periph B */
+							 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA8 periph A */
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA6 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA9 periph A with pullup */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA10 periph A with pullup */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA11 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA1 periph B with pullup */
+							 AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA0 periph B with pullup */
+					};
+
+					pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA5 periph B with pullup */
+							 AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA4 periph B with pullup */
+							 AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA3 periph B with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A */
+							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB19 periph A */
+							 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB20 periph A */
+							 AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB21 periph A */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A SPI0_MISO pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA1 periph A SPI0_MOSI pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A SPI1_MISO pin */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A SPI1_MOSI pin */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB2 periph A SPI1_SPCK pin */
+					};
+				};
+
+				i2c_gpio0 {
+					pinctrl_i2c_gpio0: i2c_gpio0-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE
+							 AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart0: serial@fffb0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffb4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffb8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fffd0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffd0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart0: serial@fffd4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffd4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@fffd8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffd8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			macb0: ethernet@fffc4000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xfffc4000 0x100>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb_rmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 21>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			usb1: gadget@fffa4000 {
+				compatible = "atmel,at91sam9260-udc";
+				reg = <0xfffa4000 0x4000>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>, <&pmc PMC_TYPE_SYSTEM 7>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fffac000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfffac000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				status = "disabled";
+			};
+
+			mmc0: mmc@fffa8000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffa8000 0x600>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffbc000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffbc000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffc8000 0x200>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@fffcc000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffcc000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			adc0: adc@fffe0000 {
+				compatible = "atmel,at91sam9260-adc";
+				reg = <0xfffe0000 0x100>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-use-external-triggers;
+				atmel,adc-channels-used = <0xf>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-startup-time = <15>;
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
+				status = "disabled";
+			};
+
+			watchdog: watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd50 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd50 0x10>;
+				status = "disabled";
+			};
+		};
+
+		usb0: usb@500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9260-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x80000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000
+				  0x6 0x0 0x70000000 0x10000000
+				  0x7 0x0 0x80000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9260-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c_gpio0: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pioA 23 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 24 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9260ek.dts b/arch/arm/boot/dts/microchip/at91sam9260ek.dts
new file mode 100644
index 000000000000..8522a210b484
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9260ek.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Atmel at91sam9260 Evaluation Kit
+ *
+ *  Copyright (C) 2016 Atmel,
+ *		  2016 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Atmel at91sam9260ek";
+	compatible = "atmel,at91sam9260ek", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		stdout-path = &dbgu;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0_slot1
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_usart0
+					 &pinctrl_usart0_rts
+					 &pinctrl_usart0_cts
+					 &pinctrl_usart0_dtr_dsr
+					 &pinctrl_usart0_dcd
+					 &pinctrl_usart0_ri>;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@fffbc000 {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_ssc0_tx>;
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
+				flash@1 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <50000000>;
+					reg = <1>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				board {
+					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+
+			shdwc: poweroff@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd50 {
+				status = "okay";
+			};
+		};
+
+		usb0: usb@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-3 {
+			label = "Button 3";
+			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			wakeup-source;
+		};
+
+		button-4 {
+			label = "Button 4";
+			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+
+		eeprom@50 {
+			compatible = "atmel,24c512";
+			reg = <0x50>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-ds1 {
+			label = "ds1";
+			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-ds5 {
+			label = "ds5";
+			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9261.dtsi b/arch/arm/boot/dts/microchip/at91sam9261.dtsi
new file mode 100644
index 000000000000..d1d678b77e84
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9261.dtsi
@@ -0,0 +1,667 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9261.dtsi - Device Tree Include file for AT91SAM9261 SoC
+ *
+ *  Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9261 family SoC";
+	compatible = "atmel,at91sam9261";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		ssc2 = &ssc2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x08000000>;
+	};
+
+	clocks {
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x28000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x28000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usb0: usb@500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_SYSTEM 16>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		fb0: fb@600000 {
+			compatible = "atmel,at91sam9261-lcdc";
+			reg = <0x00600000 0x1000>;
+			interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_SYSTEM 17>;
+			clock-names = "lcdc_clk", "hclk";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9261-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x80000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000
+				  0x6 0x0 0x70000000 0x10000000
+				  0x7 0x0 0x80000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9261-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffa0000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			usb1: gadget@fffa4000 {
+				compatible = "atmel,at91sam9261-udc";
+				reg = <0xfffa4000 0x4000>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>, <&pmc PMC_TYPE_SYSTEM 7>;
+				clock-names = "pclk", "hclk";
+				atmel,matrix = <&matrix>;
+				status = "disabled";
+			};
+
+			mmc0: mmc@fffa8000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffa8000 0x600>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk>, <&pinctrl_mmc0_slot0_cmd_dat0>, <&pinctrl_mmc0_slot0_dat1_3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fffac000 {
+				compatible = "atmel,at91sam9261-i2c";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c_twi>;
+				reg = <0xfffac000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				status = "disabled";
+			};
+
+			usart0: serial@fffb0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffb4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffb8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffbc000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffbc000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffc0000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffc0000 0x4000>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc2: ssc@fffc4000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffc4000 0x4000>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffc8000 0x200>;
+				cs-gpios = <0>, <0>, <0>, <0>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@fffcc000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffcc000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			ramc: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			smc: smc@ffffec00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffec00 0x200>;
+			};
+
+			matrix: matrix@ffffee00 {
+				compatible = "atmel,at91sam9261-matrix", "syscon";
+				reg = <0xffffee00 0x200>;
+			};
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <29 30 31>;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
+				ranges = <0xfffff400 0xfffff400 0x600>;
+
+				atmel,mux-mask =
+				      /*    A         B     */
+				      <0xffffffff 0xfffffff7>,  /* pioA */
+				      <0xffffffff 0xfffffff4>,  /* pioB */
+				      <0xffffffff 0xffffff07>;  /* pioC */
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 9  AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOC 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							<AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+					};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc2 {
+					pinctrl_ssc2_tx: ssc2_tx-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc2_rx: ssc2_rx-0 {
+						atmel,pins =
+							<AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c_bitbang: i2c-0-bitbang {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
+							<AT91_PIOA 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_i2c_twi: i2c-0-twi {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9261-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&slow_xtal>, <&main_xtal>;
+				clock-names = "slow_xtal", "main_xtal";
+			};
+
+			reset-controller@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+				clocks = <&slow_xtal>;
+			};
+
+			poweroff@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+				clocks = <&slow_xtal>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd50 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd50 0x10>;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_bitbang>;
+		sda-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 8 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/microchip/at91sam9261ek.dts
index 157e1493e6eb..313bc2797fde 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9261ek.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9261ek.dts - Device Tree file for Atmel at91sam9261 reference board
  *
  *  Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
- *
- * Licensed under GPLv2 only.
  */
 /dts-v1/;
 #include "at91sam9261.dtsi"
@@ -17,7 +16,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x4000000>;
 	};
 
@@ -32,16 +31,16 @@
 	};
 
 	ahb {
-		usb0: ohci@00500000 {
+		usb0: usb@500000 {
 			status = "okay";
 		};
 
-		fb0: fb@0x00600000 {
+		fb0: fb@600000 {
 			display = <&display0>;
 			atmel,power-control-gpio = <&pioA 12 GPIO_ACTIVE_LOW>;
 			status = "okay";
 
-			display0: display {
+			display0: panel {
 				bits-per-pixel = <16>;
 				atmel,lcdcon-backlight;
 				atmel,dmacon = <0x1>;
@@ -125,6 +124,18 @@
 		};
 
 		apb {
+			tcb0: timer@fffa0000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer1: timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			usb1: gadget@fffa4000 {
 				atmel,vbus-gpio = <&pioB 29 GPIO_ACTIVE_HIGH>;
 				status = "okay";
@@ -134,18 +145,18 @@
 				cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>;
 				status = "okay";
 
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					reg = <0>;
 					spi-max-frequency = <15000000>;
 				};
 
-				tsc2046@0 {
+				tsc2046@2 {
 					reg = <2>;
 					compatible = "ti,ads7843";
 					interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
 					spi-max-frequency = <3000000>;
-					pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>;
+					pendown-gpio = <&pioC 2 GPIO_ACTIVE_LOW>;
 
 					ti,x-min = /bits/ 16 <150>;
 					ti,x-max = /bits/ 16 <3830>;
@@ -167,6 +178,10 @@
 				status = "okay";
 			};
 
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+			};
+
 			watchdog@fffffd40 {
 				status = "okay";
 			};
@@ -177,50 +192,50 @@
 	leds {
 		compatible = "gpio-leds";
 
-		ds8 {
+		led-ds8 {
 			label = "ds8";
 			gpios = <&pioA 13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		ds7 {
+		led-ds7 {
 			label = "ds7";
 			gpios = <&pioA 14 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
 		};
 
-		ds1 {
+		led-ds1 {
 			label = "ds1";
 			gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		button_0 {
+		button-0 {
 			label = "button_0";
 			gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
 			linux,code = <256>;
 			wakeup-source;
 		};
 
-		button_1 {
+		button-1 {
 			label = "button_1";
 			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
 			linux,code = <257>;
 			wakeup-source;
 		};
 
-		button_2 {
+		button-2 {
 			label = "button_2";
 			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
 			linux,code = <258>;
 			wakeup-source;
 		};
 
-		button_3 {
+		button-3 {
 			label = "button_3";
 			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
 			linux,code = <259>;
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/microchip/at91sam9263.dtsi
index ed4b564f8de5..a4b5d1f228f9 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9263.dtsi
@@ -1,18 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC
  *
  *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2 only.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91SAM9263 family SoC";
 	compatible = "atmel,at91sam9263";
 	interrupt-parent = <&aic>;
@@ -35,16 +36,18 @@
 	};
 
 	cpus {
-		#address-cells = <0>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu {
+		cpu@0 {
 			compatible = "arm,arm926ej-s";
 			device_type = "cpu";
+			reg = <0>;
 		};
 	};
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x08000000>;
 	};
 
@@ -62,14 +65,20 @@
 		};
 	};
 
-	sram0: sram@00300000 {
+	sram0: sram@300000 {
 		compatible = "mmio-sram";
 		reg = <0x00300000 0x14000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x14000>;
 	};
 
-	sram1: sram@00500000 {
+	sram1: sram@500000 {
 		compatible = "mmio-sram";
 		reg = <0x00500000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00500000 0x4000>;
 	};
 
 	ahb {
@@ -92,268 +101,13 @@
 				atmel,external-irqs = <30 31>;
 			};
 
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc", "syscon";
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9263-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-
-				main_osc: main_osc {
-					compatible = "atmel,at91rm9200-clk-main-osc";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
-					clocks = <&main_xtal>;
-				};
-
-				main: mainck {
-					compatible = "atmel,at91rm9200-clk-main";
-					#clock-cells = <0>;
-					clocks = <&main_osc>;
-				};
-
-				plla: pllack {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
-					clocks = <&main>;
-					reg = <0>;
-					atmel,clk-input-range = <1000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
-								<190000000 240000000 2 1>;
-				};
-
-				pllb: pllbck {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKB>;
-					clocks = <&main>;
-					reg = <1>;
-					atmel,clk-input-range = <1000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
-								<190000000 240000000 2 1>;
-				};
-
-				mck: masterck {
-					compatible = "atmel,at91rm9200-clk-master";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
-					clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
-					atmel,clk-output-range = <0 120000000>;
-					atmel,clk-divisors = <1 2 4 0>;
-				};
-
-				usb: usbck {
-					compatible = "atmel,at91rm9200-clk-usb";
-					#clock-cells = <0>;
-					atmel,clk-divisors = <1 2 4 0>;
-					clocks = <&pllb>;
-				};
-
-				prog: progck {
-					compatible = "atmel,at91rm9200-clk-programmable";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					interrupt-parent = <&pmc>;
-					clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
-
-					prog0: prog0 {
-						#clock-cells = <0>;
-						reg = <0>;
-						interrupts = <AT91_PMC_PCKRDY(0)>;
-					};
-
-					prog1: prog1 {
-						#clock-cells = <0>;
-						reg = <1>;
-						interrupts = <AT91_PMC_PCKRDY(1)>;
-					};
-
-					prog2: prog2 {
-						#clock-cells = <0>;
-						reg = <2>;
-						interrupts = <AT91_PMC_PCKRDY(2)>;
-					};
-
-					prog3: prog3 {
-						#clock-cells = <0>;
-						reg = <3>;
-						interrupts = <AT91_PMC_PCKRDY(3)>;
-					};
-				};
-
-				systemck {
-					compatible = "atmel,at91rm9200-clk-system";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					uhpck: uhpck {
-						#clock-cells = <0>;
-						reg = <6>;
-						clocks = <&usb>;
-					};
-
-					udpck: udpck {
-						#clock-cells = <0>;
-						reg = <7>;
-						clocks = <&usb>;
-					};
-
-					pck0: pck0 {
-						#clock-cells = <0>;
-						reg = <8>;
-						clocks = <&prog0>;
-					};
-
-					pck1: pck1 {
-						#clock-cells = <0>;
-						reg = <9>;
-						clocks = <&prog1>;
-					};
-
-					pck2: pck2 {
-						#clock-cells = <0>;
-						reg = <10>;
-						clocks = <&prog2>;
-					};
-
-					pck3: pck3 {
-						#clock-cells = <0>;
-						reg = <11>;
-						clocks = <&prog3>;
-					};
-				};
-
-				periphck {
-					compatible = "atmel,at91rm9200-clk-peripheral";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&mck>;
-
-					pioA_clk: pioA_clk {
-						#clock-cells = <0>;
-						reg = <2>;
-					};
-
-					pioB_clk: pioB_clk {
-						#clock-cells = <0>;
-						reg = <3>;
-					};
-
-					pioCDE_clk: pioCDE_clk {
-						#clock-cells = <0>;
-						reg = <4>;
-					};
-
-					usart0_clk: usart0_clk {
-						#clock-cells = <0>;
-						reg = <7>;
-					};
-
-					usart1_clk: usart1_clk {
-						#clock-cells = <0>;
-						reg = <8>;
-					};
-
-					usart2_clk: usart2_clk {
-						#clock-cells = <0>;
-						reg = <9>;
-					};
-
-					mci0_clk: mci0_clk {
-						#clock-cells = <0>;
-						reg = <10>;
-					};
-
-					mci1_clk: mci1_clk {
-						#clock-cells = <0>;
-						reg = <11>;
-					};
-
-					can_clk: can_clk {
-						#clock-cells = <0>;
-						reg = <12>;
-					};
-
-					twi0_clk: twi0_clk {
-						#clock-cells = <0>;
-						reg = <13>;
-					};
-
-					spi0_clk: spi0_clk {
-						#clock-cells = <0>;
-						reg = <14>;
-					};
-
-					spi1_clk: spi1_clk {
-						#clock-cells = <0>;
-						reg = <15>;
-					};
-
-					ssc0_clk: ssc0_clk {
-						#clock-cells = <0>;
-						reg = <16>;
-					};
-
-					ssc1_clk: ssc1_clk {
-						#clock-cells = <0>;
-						reg = <17>;
-					};
-
-					ac97_clk: ac97_clk {
-						#clock-cells = <0>;
-						reg = <18>;
-					};
-
-					tcb_clk: tcb_clk {
-						#clock-cells = <0>;
-						reg = <19>;
-					};
-
-					pwm_clk: pwm_clk {
-						#clock-cells = <0>;
-						reg = <20>;
-					};
-
-					macb0_clk: macb0_clk {
-						#clock-cells = <0>;
-						reg = <21>;
-					};
-
-					g2de_clk: g2de_clk {
-						#clock-cells = <0>;
-						reg = <23>;
-					};
-
-					udc_clk: udc_clk {
-						#clock-cells = <0>;
-						reg = <24>;
-					};
-
-					isi_clk: isi_clk {
-						#clock-cells = <0>;
-						reg = <25>;
-					};
-
-					lcd_clk: lcd_clk {
-						#clock-cells = <0>;
-						reg = <26>;
-					};
-
-					dma_clk: dma_clk {
-						#clock-cells = <0>;
-						reg = <27>;
-					};
-
-					ohci_clk: ohci_clk {
-						#clock-cells = <0>;
-						reg = <29>;
-					};
-				};
+				#clock-cells = <2>;
+				clocks = <&slow_xtal>, <&main_xtal>;
+				clock-names = "slow_xtal", "main_xtal";
 			};
 
 			ramc0: ramc@ffffe200 {
@@ -385,24 +139,26 @@
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffd30 0xf>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			};
 
 			tcb0: timer@fff7c000 {
-				compatible = "atmel,at91rm9200-tcb";
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xfff7c000 0x100>;
 				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb_clk>, <&slow_xtal>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
 				clock-names = "t0_clk", "slow_clk";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
 				clocks = <&slow_xtal>;
 			};
 
-			shdwc@fffffd10 {
+			poweroff@fffffd10 {
 				compatible = "atmel,at91sam9260-shdwc";
 				reg = <0xfffffd10 0x10>;
 				clocks = <&slow_xtal>;
@@ -411,7 +167,7 @@
 			pinctrl@fffff200 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
 				ranges = <0xfffff200 0xfffff200 0xa00>;
 
 				atmel,mux-mask = <
@@ -435,8 +191,8 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA26 periph A with pullup */
-							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA27 periph A */
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart0_rts: usart0_rts-0 {
@@ -453,8 +209,8 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD0 periph A with pullup */
-							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD1 periph A */
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart1_rts: usart1_rts-0 {
@@ -471,8 +227,8 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD2 periph A with pullup */
-							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD3 periph A */
+							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart2_rts: usart2_rts-0 {
@@ -734,7 +490,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioA_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 				};
 
 				pioB: gpio@fffff400 {
@@ -745,7 +501,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioB_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
 				};
 
 				pioC: gpio@fffff600 {
@@ -756,7 +512,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioCDE_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
 				};
 
 				pioD: gpio@fffff800 {
@@ -767,7 +523,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioCDE_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
 				};
 
 				pioE: gpio@fffffa00 {
@@ -778,17 +534,18 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioCDE_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
 				};
 			};
 
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -796,12 +553,13 @@
 			usart0: serial@fff8c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff8c000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
-				clocks = <&usart0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -809,12 +567,13 @@
 			usart1: serial@fff90000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff90000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
-				clocks = <&usart1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -822,12 +581,13 @@
 			usart2: serial@fff94000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff94000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
-				clocks = <&usart2_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -838,7 +598,7 @@
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&ssc0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
 				clock-names = "pclk";
 				status = "disabled";
 			};
@@ -849,7 +609,7 @@
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
-				clocks = <&ssc1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
 				clock-names = "pclk";
 				status = "disabled";
 			};
@@ -860,7 +620,7 @@
 				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ac97>;
-				clocks = <&ac97_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
 				clock-names = "ac97_clk";
 				status = "disabled";
 			};
@@ -871,7 +631,7 @@
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb_rmii>;
-				clocks = <&macb0_clk>, <&macb0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 21>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
 			};
@@ -880,7 +640,7 @@
 				compatible = "atmel,at91sam9263-udc";
 				reg = <0xfff78000 0x4000>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&udc_clk>, <&udpck>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_SYSTEM 7>;
 				clock-names = "pclk", "hclk";
 				status = "disabled";
 			};
@@ -891,7 +651,7 @@
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&twi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 				status = "disabled";
 			};
 
@@ -899,10 +659,9 @@
 				compatible = "atmel,hsmci";
 				reg = <0xfff80000 0x600>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
-				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&mci0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
 				clock-names = "mci_clk";
 				status = "disabled";
 			};
@@ -911,10 +670,9 @@
 				compatible = "atmel,hsmci";
 				reg = <0xfff84000 0x600>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
-				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&mci1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
 				clock-names = "mci_clk";
 				status = "disabled";
 			};
@@ -938,7 +696,7 @@
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&spi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
@@ -951,7 +709,7 @@
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
-				clocks = <&spi1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
@@ -961,7 +719,7 @@
 				reg = <0xfffb8000 0x300>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 4>;
 				#pwm-cells = <3>;
-				clocks = <&pwm_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
 				clock-names = "pwm_clk";
 				status = "disabled";
 			};
@@ -972,7 +730,7 @@
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_can_rx_tx>;
-				clocks = <&can_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 				clock-names = "can_clk";
 			};
 
@@ -999,22 +757,22 @@
 			};
 		};
 
-		fb0: fb@0x00700000 {
+		fb0: fb@700000 {
 			compatible = "atmel,at91sam9263-lcdc";
 			reg = <0x00700000 0x1000>;
 			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_fb>;
-			clocks = <&lcd_clk>, <&lcd_clk>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_PERIPHERAL 26>;
 			clock-names = "lcdc_clk", "hclk";
 			status = "disabled";
 		};
 
-		usb0: ohci@00a00000 {
+		usb0: usb@a00000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00a00000 0x100000>;
 			interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_SYSTEM 6>;
 			clock-names = "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
@@ -1032,7 +790,7 @@
 				  0x3 0x0 0x40000000 0x10000000
 				  0x4 0x0 0x50000000 0x10000000
 				  0x5 0x0 0x60000000 0x10000000>;
-			clocks = <&mck>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			status = "disabled";
 
 			nand_controller0: nand-controller {
@@ -1053,7 +811,7 @@
 			reg = <0x80000000 0x20000000>;
 			ranges = <0x0 0x0 0x80000000 0x10000000
 				  0x1 0x0 0x90000000 0x10000000>;
-			clocks = <&mck>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			status = "disabled";
 
 			nand_controller1: nand-controller {
@@ -1068,9 +826,8 @@
 
 	i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
-			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioB 4 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioB 5 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/microchip/at91sam9263ek.dts
index 10a0925da10e..93c5268a0845 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9263ek.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9263ek.dts - Device Tree file for Atmel at91sam9263 reference board
  *
  *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2 only
  */
 /dts-v1/;
 #include "at91sam9263.dtsi"
@@ -17,7 +16,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x4000000>;
 	};
 
@@ -37,6 +36,18 @@
 				status = "okay";
 			};
 
+			tcb0: timer@fff7c000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			usart0: serial@fff8c000 {
 				pinctrl-0 = <
 					&pinctrl_usart0
@@ -61,6 +72,7 @@
 					&pinctrl_mmc0_clk
 					&pinctrl_mmc0_slot0_cmd_dat0
 					&pinctrl_mmc0_slot0_dat1_3>;
+				pinctrl-names = "default";
 				status = "okay";
 				slot@0 {
 					reg = <0>;
@@ -83,23 +95,27 @@
 			spi0: spi@fffa4000 {
 				status = "okay";
 				cs-gpios = <&pioA 5 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
 				};
 			};
 
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+			};
+
 			watchdog@fffffd40 {
 				status = "okay";
 			};
 		};
 
-		fb0: fb@0x00700000 {
+		fb0: fb@700000 {
 			display = <&display0>;
 			status = "okay";
 
-			display0: display {
+			display0: panel {
 				bits-per-pixel = <16>;
 				atmel,lcdcon-backlight;
 				atmel,dmacon = <0x1>;
@@ -136,7 +152,7 @@
 				nand@3 {
 					reg = <0x3 0x0 0x800000>;
 					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
 					nand-bus-width = <8>;
 					nand-ecc-mode = "soft";
 					nand-on-flash-bbt;
@@ -191,7 +207,7 @@
 			};
 		};
 
-		usb0: ohci@00a00000 {
+		usb0: usb@a00000 {
 			num-ports = <2>;
 			status = "okay";
 			atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH
@@ -203,30 +219,30 @@
 	leds {
 		compatible = "gpio-leds";
 
-		d3 {
+		led-d3 {
 			label = "d3";
 			gpios = <&pioB 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		d2 {
+		led-d2 {
 			label = "d2";
 			gpios = <&pioC 29 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		left_click {
+		button-left-click {
 			label = "left_click";
 			gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
 			wakeup-source;
 		};
 
-		right_click {
+		button-right-click {
 			label = "right_click";
 			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
@@ -237,8 +253,8 @@
 	i2c-gpio-0 {
 		status = "okay";
 
-		24c512@50 {
-			compatible = "24c512";
+		eeprom@50 {
+			compatible = "atmel,24c512";
 			reg = <0x50>;
 			pagesize = <128>;
 		};
diff --git a/arch/arm/boot/dts/microchip/at91sam9g15.dtsi b/arch/arm/boot/dts/microchip/at91sam9g15.dtsi
new file mode 100644
index 000000000000..dde88276fe52
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9g15.dtsi
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g15.dtsi - Device Tree Include file for AT91SAM9G15 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G15 SoC";
+	compatible = "atmel,at91sam9g15", "atmel,at91sam9x5";
+};
+
+&pinctrl {
+	atmel,mux-mask = <
+	      /*    A         B          C     */
+	       0xffffffff 0xffe0399f 0x00000000  /* pioA */
+	       0x00040000 0x00047e3f 0x00000000  /* pioB */
+	       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+	       0x003fffff 0x003f8000 0x00000000  /* pioD */
+	      >;
+};
+
+&pmc {
+	compatible = "atmel,at91sam9g15-pmc", "atmel,at91sam9x5-pmc", "syscon";
+};
diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/microchip/at91sam9g15ek.dts
index d1d2b400f1c6..889a5097eb2d 100644
--- a/arch/arm/boot/dts/at91sam9g15ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g15ek.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91sam9g15ek.dts - Device Tree file for AT91SAM9G15-EK board
  *
  *  Copyright (C) 2012 Atmel,
  *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "at91sam9g15.dtsi"
@@ -15,14 +14,6 @@
 	model = "Atmel AT91SAM9G15-EK";
 	compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
 
-	ahb {
-		apb {
-			hlcdc: hlcdc@f8038000 {
-				status = "okay";
-			};
-		};
-	};
-
 	backlight: backlight {
 		status = "okay";
 	};
@@ -39,3 +30,7 @@
 		status = "okay";
 	};
 };
+
+&hlcdc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9g20.dtsi b/arch/arm/boot/dts/microchip/at91sam9g20.dtsi
new file mode 100644
index 000000000000..738a43ffd228
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9g20.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G20 family SoC";
+	compatible = "atmel,at91sam9g20";
+
+	memory@20000000 {
+		reg = <0x20000000 0x08000000>;
+	};
+
+	sram0: sram@2ff000 {
+		status = "disabled";
+	};
+
+	sram1: sram@2fc000 {
+		compatible = "mmio-sram";
+		reg = <0x002fc000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x002fc000 0x8000>;
+	};
+
+	ahb {
+		apb {
+			i2c0: i2c@fffac000 {
+				compatible = "atmel,at91sam9g20-i2c";
+			};
+
+			ssc0: ssc@fffbc000 {
+				compatible = "atmel,at91sam9rl-ssc";
+			};
+
+			adc0: adc@fffe0000 {
+				atmel,adc-startup-time = <40>;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9g20-pmc", "atmel,at91sam9260-pmc", "syscon";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g20ek.dts b/arch/arm/boot/dts/microchip/at91sam9g20ek.dts
index bbfd753112c9..1e62fd371ddb 100644
--- a/arch/arm/boot/dts/at91sam9g20ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g20ek.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9g20ek.dts - Device Tree file for Atmel at91sam9g20ek board
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 /dts-v1/;
 #include "at91sam9g20ek_common.dtsi"
@@ -15,13 +14,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		ds1 {
+		led-ds1 {
 			label = "ds1";
 			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		ds5 {
+		led-ds5 {
 			label = "ds5";
 			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts
index bdb799bad179..3e5eab57d1a5 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9g20ek_2mmc.dts - Device Tree file for Atmel at91sam9g20ek 2 MMC board
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 /dts-v1/;
 #include "at91sam9g20ek_common.dtsi"
@@ -13,7 +12,7 @@
 	compatible = "atmel,at91sam9g20ek_2mmc", "atmel,at91sam9g20", "atmel,at91sam9";
 
 	ahb {
-		apb{
+		apb {
 			mmc0: mmc@fffa8000 {
 				/* clk already mux wuth slot0 */
 				pinctrl-0 = <
@@ -41,13 +40,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		ds1 {
+		led-ds1 {
 			label = "ds1";
 			gpios = <&pioB 9 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		ds5 {
+		led-ds5 {
 			label = "ds5";
 			gpios = <&pioB 8 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi
new file mode 100644
index 000000000000..84a7287107f8
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+#include "at91sam9g20.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+
+	chosen {
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				board {
+					pinctrl_pck0_as_mck: pck0_as_mck {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC1 periph B */
+					};
+
+				};
+
+				usb1 {
+					pinctrl_usb1_vbus_gpio: usb1_vbus_gpio {
+						atmel,pins =
+							<AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PC5 GPIO */
+					};
+				};
+
+				mmc0_slot1 {
+					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PC9 gpio CD pin pull up and deglitch */
+					};
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_usart0
+					 &pinctrl_usart0_rts
+					 &pinctrl_usart0_cts
+					 &pinctrl_usart0_dtr_dsr
+					 &pinctrl_usart0_dcd
+					 &pinctrl_usart0_ri>;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
+				pinctrl-names = "default";
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0_slot1
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			ssc0: ssc@fffbc000 {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_ssc0_tx>;
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
+				flash@1 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <50000000>;
+					reg = <1>;
+				};
+			};
+
+			shdwc: poweroff@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd50 {
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@80000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@a0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4a0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7ca0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: usb@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+
+		eeprom@50 {
+			compatible = "atmel,24c512";
+			reg = <0x50>;
+			vcc-supply = <&reg_3v3>;
+		};
+
+		wm8731: wm8731@1b {
+			compatible = "wm8731";
+			reg = <0x1b>;
+
+			/* PCK0 at 12MHz */
+			clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			clock-names = "mclk";
+			assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			assigned-clock-rates = <12000000>;
+
+			HPVDD-supply = <&vcc_dac>;
+			AVDD-supply = <&vcc_dac>;
+			DCVDD-supply = <&reg_3v3>;
+			DBVDD-supply = <&reg_3v3>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-3 {
+			label = "Button 3";
+			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			wakeup-source;
+		};
+
+		button-4 {
+			label = "Button 4";
+			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	sound {
+		compatible = "atmel,at91sam9g20ek-wm8731-audio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_mck>;
+
+		atmel,model = "wm8731 @ AT91SAMG20EK";
+
+		atmel,audio-routing =
+			"Ext Spk", "LHPOUT",
+			"Int Mic", "MICIN";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8731>;
+	};
+
+	reg_5v: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		vin-supply = <&reg_5v>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_1v: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V";
+		vin-supply = <&reg_5v>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+	};
+
+	vcc_dac: fixedregulator3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_DAC";
+		vin-supply = <&reg_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
new file mode 100644
index 000000000000..947c011c1b00
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the GARDENA smart Gateway (Article No. 19000)
+ *
+ *  Copyright (C) 2020 GARDENA GmbH
+ */
+
+/dts-v1/;
+
+#include "at91sam9g25.dtsi"
+#include "at91sam9x5ek.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "GARDENA smart Gateway (Article No. 19000)";
+	compatible = "gardena,smart-gateway-at91sam", "atmel,at91sam9g25", "atmel,at91sam9x5",
+		"atmel,at91sam9";
+
+	aliases {
+		serial1 = &usart3;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button {
+			label = "USER_BTN1";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+		};
+	};
+
+	1wire_cm {
+		status = "disabled";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power-blue {
+			label = "smartgw:power:blue";
+			gpios = <&pioC 21 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-power-green {
+			label = "smartgw:power:green";
+			gpios = <&pioC 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+
+		led-power-red {
+			label = "smartgw:power:red";
+			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-radio-blue {
+			label = "smartgw:radio:blue";
+			gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-radio-green {
+			label = "smartgw:radio:green";
+			gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-radio-red {
+			label = "smartgw:radio:red";
+			gpios = <&pioC 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-internet-blue {
+			label = "smartgw:internet:blue";
+			gpios = <&pioC 15 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-internet-green {
+			label = "smartgw:internet:green";
+			gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-internet-red {
+			label = "smartgw:internet:red";
+			gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-heartbeat {
+			label = "smartgw:heartbeat";
+			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-pb18 {
+			status = "disabled";
+		};
+
+		led-pd21 {
+			status = "disabled";
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&usart0 {
+	status = "disabled";
+};
+
+&usart2 {
+	status = "disabled";
+};
+
+&usart3 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_usart3
+		     &pinctrl_usart3_rts
+		     &pinctrl_usart3_cts
+		    >;
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "disabled";
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&spi0 {
+	status = "disabled";
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&adc0 {
+	status = "disabled";
+};
+
+&ssc0 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/microchip/at91sam9g25.dtsi
index a7da0dd0c98f..ec3c77221881 100644
--- a/arch/arm/boot/dts/at91sam9g25.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9g25.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9g25.dtsi - Device Tree Include file for AT91SAM9G25 SoC
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 
 #include "at91sam9x5.dtsi"
@@ -21,11 +20,15 @@
 				atmel,mux-mask = <
 				      /*    A         B          C     */
 				       0xffffffff 0xffe0399f 0xc000001c  /* pioA */
-				       0x0007ffff 0x8000fe3f 0x00000000  /* pioB */
+				       0x0007ffff 0x00047e3f 0x00000000  /* pioB */
 				       0x80000000 0x07c0ffff 0xb83fffff  /* pioC */
 				       0x003fffff 0x003f8000 0x00000000  /* pioD */
 				      >;
 			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9g25-pmc", "atmel,at91sam9x5-pmc", "syscon";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/microchip/at91sam9g25ek.dts b/arch/arm/boot/dts/microchip/at91sam9g25ek.dts
new file mode 100644
index 000000000000..61b0bdb615dc
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9g25ek.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9g25.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G25-EK";
+	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&i2c0 {
+	camera@30 {
+		compatible = "ovti,ov2640";
+		reg = <0x30>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+		resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
+		pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
+		clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+		clock-names = "xvclk";
+		assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+		assigned-clock-rates = <25000000>;
+		status = "okay";
+
+		port {
+			ov2640_0: endpoint {
+				remote-endpoint = <&isi_0>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&isi {
+	status = "okay";
+
+	port {
+		isi_0: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ov2640_0>;
+			bus-width = <8>;
+			vsync-active = <1>;
+			hsync-active = <1>;
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&spi0 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/microchip/at91sam9g35.dtsi
index ff4115886f97..c9cfb93092ee 100644
--- a/arch/arm/boot/dts/at91sam9g35.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9g35.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9g35.dtsi - Device Tree Include file for AT91SAM9G35 SoC
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 
 #include "at91sam9x5.dtsi"
@@ -25,6 +24,10 @@
 				       0x003fffff 0x003f8000 0x00000000  /* pioD */
 				      >;
 			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9g35-pmc", "atmel,at91sam9x5-pmc", "syscon";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/microchip/at91sam9g35ek.dts
index 23ec8b13f30a..f966b56de63c 100644
--- a/arch/arm/boot/dts/at91sam9g35ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g35ek.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91sam9g35ek.dts - Device Tree file for AT91SAM9G35-EK board
  *
  *  Copyright (C) 2012 Atmel,
  *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "at91sam9g35.dtsi"
@@ -15,19 +14,6 @@
 	model = "Atmel AT91SAM9G35-EK";
 	compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
 
-	ahb {
-		apb {
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			hlcdc: hlcdc@f8038000 {
-				status = "okay";
-			};
-		};
-	};
-
 	backlight: backlight {
 		status = "okay";
 	};
@@ -44,3 +30,12 @@
 		status = "okay";
 	};
 };
+
+&hlcdc {
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9g45.dtsi b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi
new file mode 100644
index 000000000000..4e00ed2d3ecd
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi
@@ -0,0 +1,1022 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC
+ *                    applies to AT91SAM9G45, AT91SAM9M10,
+ *                    AT91SAM9G46, AT91SAM9M11 SoC
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9G45 family SoC";
+	compatible = "atmel,at91sam9g45";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		pwm0 = &pwm0;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <300000>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x10000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
+			};
+
+			ramc0: ramc@ffffe400 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe400 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
+				clock-names = "ddrck";
+			};
+
+			ramc1: ramc@ffffe600 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe600 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
+				clock-names = "ddrck";
+			};
+
+			smc: smc@ffffe800 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffe800 0x200>;
+			};
+
+			matrix: matrix@ffffea00 {
+				compatible = "atmel,at91sam9g45-matrix", "syscon";
+				reg = <0xffffea00 0x200>;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9g45-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			reset-controller@fffffd00 {
+				compatible = "atmel,at91sam9g45-rstc";
+				reg = <0xfffffd00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+
+			poweroff@fffffd10 {
+				compatible = "atmel,at91sam9rl-shdwc";
+				reg = <0xfffffd10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			tcb0: timer@fff7c000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfff7c000 0x100>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			tcb1: timer@fffd4000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffd4000 0x100>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			dma: dma-controller@ffffec00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffec00 0x200>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+				clock-names = "dma_clk";
+			};
+
+			pinctrl@fffff200 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
+				ranges = <0xfffff200 0xfffff200 0xa00>;
+
+				atmel,mux-mask = <
+				      /*    A         B     */
+				       0xffffffff 0xffc003ff  /* pioA */
+				       0xffffffff 0x800f8f00  /* pioB */
+				       0xffffffff 0x00000e00  /* pioC */
+				       0xffffffff 0xff0c1381  /* pioD */
+				       0xffffffff 0x81ffff81  /* pioE */
+				      >;
+
+				/* shared pinctrl settings */
+				ac97 {
+					pinctrl_ac97: ac97-0 {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* AC97RX */
+							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* AC97TX */
+							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* AC97FS */
+							 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* AC97CK */
+					};
+				};
+
+				adc0 {
+					pinctrl_adc0_adtrg: adc0_adtrg {
+						atmel,pins = <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad0: adc0_ad0 {
+						atmel,pins = <AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad1: adc0_ad1 {
+						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad2: adc0_ad2 {
+						atmel,pins = <AT91_PIOD 22 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad3: adc0_ad3 {
+						atmel,pins = <AT91_PIOD 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad4: adc0_ad4 {
+						atmel,pins = <AT91_PIOD 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad5: adc0_ad5 {
+						atmel,pins = <AT91_PIOD 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad6: adc0_ad6 {
+						atmel,pins = <AT91_PIOD 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad7: adc0_ad7 {
+						atmel,pins = <AT91_PIOD 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA21 periph A TWCK0 */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA20 periph A TWD0 */
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A TWCK1 */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A TWD1 */
+					};
+				};
+
+				isi {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
+						atmel,pins =
+							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* D0 */
+							AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* D1 */
+							AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* D2 */
+							AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* D3 */
+							AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* D4 */
+							AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* D5 */
+							AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* D6 */
+							AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* D7 */
+							AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PCK */
+							AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* VSYNC */
+							AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* HSYNC */
+					};
+
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* D8 */
+							AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D9 */
+					};
+
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* D10 */
+							AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D11 */
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB17 periph B */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB15 periph B */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD16 periph A */
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD17 periph A */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC9 periph B */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC11 periph B */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B */
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA24 periph B */
+					};
+				};
+
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							 <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				macb {
+					pinctrl_macb_rmii: macb_rmii-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA10 periph A */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA16 periph A */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA18 periph A */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA19 periph A */
+					};
+
+					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA6 periph B */
+							 AT91_PIOA 7 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA7 periph B */
+							 AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA8 periph B */
+							 AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA9 periph B */
+							 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA29 periph B */
+							 AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA30 periph B */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA1 periph A with pullup */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA2 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA3 periph A with pullup */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA4 periph A with pullup */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA5 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA6 periph A with pullup */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA8 periph A with pullup */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA9 periph A with pullup */
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA31 periph A */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA22 periph A with pullup */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA23 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA24 periph A with pullup */
+							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA25 periph A with pullup */
+							 AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA26 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 {
+						atmel,pins =
+							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA27 periph A with pullup */
+							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA28 periph A with pullup */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA29 periph A with pullup */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA30 periph A with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD0 periph A */
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD1 periph A */
+							 AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD2 periph A */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD3 periph A */
+							 AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD4 periph A */
+							 AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD5 periph A */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD10 periph A */
+							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD11 periph A */
+							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD12 periph A */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD13 periph A */
+							 AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD14 periph A */
+							 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD15 periph A */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A SPI0_MISO pin */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A SPI0_MOSI pin */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB2 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A SPI1_MISO pin */
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A SPI1_MOSI pin */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB16 periph A SPI1_SPCK pin */
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOD 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOE 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE0 periph A */
+							 AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE2 periph A */
+							 AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE3 periph A */
+							 AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE4 periph A */
+							 AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE5 periph A */
+							 AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE6 periph A */
+							 AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE7 periph A */
+							 AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE8 periph A */
+							 AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE9 periph A */
+							 AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE10 periph A */
+							 AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE11 periph A */
+							 AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE12 periph A */
+							 AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE13 periph A */
+							 AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE14 periph A */
+							 AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE15 periph A */
+							 AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE16 periph A */
+							 AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE17 periph A */
+							 AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE18 periph A */
+							 AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE19 periph A */
+							 AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE20 periph A */
+							 AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE21 periph A */
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE22 periph A */
+							 AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE23 periph A */
+							 AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE24 periph A */
+							 AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE25 periph A */
+							 AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE26 periph A */
+							 AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE27 periph A */
+							 AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE28 periph A */
+							 AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE29 periph A */
+							 AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PE30 periph A */
+					};
+				};
+
+				pioA: gpio@fffff200 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff200 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioD: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				};
+
+				pioE: gpio@fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				reg = <0xffffee00 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart0: serial@fff8c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff8c000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fff90000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff90000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fff94000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff94000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fff98000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff98000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			macb0: ethernet@fffbc000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xfffbc000 0x100>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb_rmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_PERIPHERAL 25>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			trng: rng@fffcc000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xfffcc000 0x100>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+			};
+
+			i2c0: i2c@fff84000 {
+				compatible = "atmel,at91sam9g10-i2c";
+				reg = <0xfff84000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@fff88000 {
+				compatible = "atmel,at91sam9g10-i2c";
+				reg = <0xfff88000 0x100>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				status = "disabled";
+			};
+
+			ssc0: ssc@fff9c000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xfff9c000 0x4000>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffa0000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xfffa0000 0x4000>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ac97: sound@fffac000 {
+				compatible = "atmel,at91sam9263-ac97c";
+				reg = <0xfffac000 0x4000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 4>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ac97>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "ac97_clk";
+				status = "disabled";
+			};
+
+			adc0: adc@fffb0000 {
+				compatible = "atmel,at91sam9g45-adc";
+				reg = <0xfffb0000 0x100>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-channels-used = <0xff>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-startup-time = <40>;
+			};
+
+			isi@fffb4000 {
+				compatible = "atmel,at91sam9g45-isi";
+				reg = <0xfffb4000 0x4000>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			pwm0: pwm@fffb8000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xfffb8000 0x300>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				status = "disabled";
+			};
+
+			mmc0: mmc@fff80000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfff80000 0x600>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			mmc1: mmc@fffd0000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffd0000 0x600>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>;
+				dma-names = "rxtx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			spi0: spi@fffa4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffa4000 0x200>;
+				interrupts = <14 4 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@fffa8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffa8000 0x200>;
+				interrupts = <15 4 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			usb2: gadget@fff78000 {
+				compatible = "atmel,at91sam9g45-udc";
+				reg = <0x00600000 0x80000
+				       0xfff78000 0x400>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+
+			clk32k: clock-controller@fffffd50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffd50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			rtc@fffffdb0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffdb0 0x30>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd60 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd60 0x10>;
+				status = "disabled";
+			};
+		};
+
+		fb0: fb@500000 {
+			compatible = "atmel,at91sam9g45-lcdc";
+			reg = <0x00500000 0x1000>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>;
+			clock-names = "hclk", "lcdc_clk";
+			status = "disabled";
+		};
+
+		usb0: usb@700000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb1: usb@800000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00800000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9g45-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x80000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9g45-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 21 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <5>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts
index 2522c3308305..2a31b2f14893 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board
  *
  *  Copyright (C) 2011 Atmel,
  *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "at91sam9g45.dtsi"
@@ -19,7 +18,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@70000000 {
 		reg = <0x70000000 0x4000000>;
 	};
 
@@ -39,6 +38,18 @@
 				status = "okay";
 			};
 
+			tcb0: timer@fff7c000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			usart1: serial@fff90000 {
 				pinctrl-0 =
 					<&pinctrl_usart1
@@ -61,9 +72,9 @@
 					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
 					resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>;
 					pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>;
-					clocks = <&pck1>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 9>;
 					clock-names = "xvclk";
-					assigned-clocks = <&pck1>;
+					assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
 					assigned-clock-rates = <25000000>;
 
 					port {
@@ -88,6 +99,7 @@
 					&pinctrl_board_mmc0
 					&pinctrl_mmc0_slot0_clk_cmd_dat0
 					&pinctrl_mmc0_slot0_dat1_3>;
+				pinctrl-names = "default";
 				status = "okay";
 				slot@0 {
 					reg = <0>;
@@ -101,6 +113,7 @@
 					&pinctrl_board_mmc1
 					&pinctrl_mmc1_slot0_clk_cmd_dat0
 					&pinctrl_mmc1_slot0_dat1_3>;
+				pinctrl-names = "default";
 				status = "okay";
 				slot@0 {
 					reg = <0>;
@@ -151,10 +164,10 @@
 				};
 			};
 
-			spi0: spi@fffa4000{
+			spi0: spi@fffa4000 {
 				status = "okay";
 				cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <13000000>;
 					reg = <0>;
@@ -166,6 +179,10 @@
 				status = "okay";
 			};
 
+			ac97: sound@fffac000 {
+				status = "okay";
+			};
+
 			adc0: adc@fffb0000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <
@@ -216,11 +233,11 @@
 			};
 		};
 
-		fb0: fb@0x00500000 {
+		fb0: fb@500000 {
 			display = <&display0>;
 			status = "okay";
 
-			display0: display {
+			display0: panel {
 				bits-per-pixel = <32>;
 				atmel,lcdcon-backlight;
 				atmel,dmacon = <0x1>;
@@ -286,39 +303,39 @@
 			};
 		};
 
-		usb0: ohci@00700000 {
+		usb0: usb@700000 {
 			status = "okay";
 			num-ports = <2>;
 			atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW
 					   &pioD 3 GPIO_ACTIVE_LOW>;
 		};
 
-		usb1: ehci@00800000 {
+		usb1: usb@800000 {
 			status = "okay";
 		};
 	};
 
-	leds {
+	led-controller-1 {
 		compatible = "gpio-leds";
 
-		d8 {
+		led-1 {
 			label = "d8";
 			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
 
-	pwmleds {
+	led-controller-2 {
 		compatible = "pwm-leds";
 
-		d6 {
+		led-2 {
 			label = "d6";
 			pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>;
 			max-brightness = <255>;
 			linux,default-trigger = "nand-disk";
 		};
 
-		d7 {
+		led-3 {
 			label = "d7";
 			pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
 			max-brightness = <255>;
@@ -326,48 +343,48 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		left_click {
+		button-left-click {
 			label = "left_click";
 			gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
 			wakeup-source;
 		};
 
-		right_click {
+		button-right-click {
 			label = "right_click";
 			gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
 			wakeup-source;
 		};
 
-		left {
+		button-left {
 			label = "Joystick Left";
 			gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
 			linux,code = <105>;
 		};
 
-		right {
+		button-right {
 			label = "Joystick Right";
 			gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
 			linux,code = <106>;
 		};
 
-		up {
+		button-up {
 			label = "Joystick Up";
 			gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
 			linux,code = <103>;
 		};
 
-		down {
+		button-down {
 			label = "Joystick Down";
 			gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
 			linux,code = <108>;
 		};
 
-		enter {
+		button-enter {
 			label = "Joystick Press";
 			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
diff --git a/arch/arm/boot/dts/microchip/at91sam9n12.dtsi b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi
new file mode 100644
index 000000000000..af41c3dbb4bf
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi
@@ -0,0 +1,798 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9n12.dtsi - Device Tree include file for AT91SAM9N12 SoC
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Hong Xu <hong.xu@atmel.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9N12 SoC";
+	compatible = "atmel,at91sam9n12";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		ssc0 = &ssc0;
+		pwm0 = &pwm0;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x8000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
+			};
+
+			matrix: matrix@ffffde00 {
+				compatible = "atmel,at91sam9n12-matrix", "syscon";
+				reg = <0xffffde00 0x100>;
+			};
+
+			pmecc: ecc-engine@ffffe000 {
+				compatible = "atmel,at91sam9g45-pmecc";
+				reg = <0xffffe000 0x600>,
+				      <0xffffe600 0x200>;
+			};
+
+			ramc0: ramc@ffffe800 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe800 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
+				clock-names = "ddrck";
+			};
+
+			smc: smc@ffffea00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffea00 0x200>;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9n12-pmc", "syscon";
+				reg = <0xfffffc00 0x200>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+			};
+
+			reset-controller@fffffe00 {
+				compatible = "atmel,at91sam9g45-rstc";
+				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffe30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			poweroff@fffffe10 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			clk32k: clock-controller@fffffe50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffe50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
+			};
+
+			mmc0: mmc@f0008000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf0008000 0x600>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "mci_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			tcb0: timer@f8008000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8008000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			tcb1: timer@f800c000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf800c000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			hlcdc: hlcdc@f8038000 {
+				compatible = "atmel,at91sam9n12-hlcdc";
+				reg = <0xf8038000 0x2000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
+				clock-names = "periph_clk", "sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
+			};
+
+			dma: dma-controller@ffffec00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffec00 0x200>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				clock-names = "dma_clk";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91sam9x5-pinctrl", "simple-mfd";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe07983 0x00000000  /* pioA */
+				       0x00040000 0x00047e0f 0x00000000  /* pioB */
+				       0xfdffffff 0x07c00000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				lcd {
+					pinctrl_lcd_base: lcd-base-0 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+							 AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
+							 AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+					};
+
+					pinctrl_lcd_pwm: lcd-pwm-0 {
+						atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+					};
+
+					pinctrl_lcd_rgb888: lcd-rgb-3 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA1 periph A with pullup */
+							 AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA0 periph A */
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA3 periph A */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA6 periph A with pullup */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA5 periph A */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA8 periph A with pullup */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA7 periph A */
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PC23 periph B with pullup */
+							 AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC22 periph B */
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC24 periph B */
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC25 periph B */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* PC9 periph C with pullup */
+							 AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC8 periph C */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE
+							 AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							 <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA16 periph A with pullup */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA15 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA18 periph A with pullup */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA19 periph A with pullup */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA20 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
+						atmel,pins =
+							<AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA11 periph B with pullup */
+							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA12 periph B with pullup */
+							 AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA13 periph B with pullup */
+							 AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA14 periph B with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
+							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
+							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA26 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A SPI0_MISO pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A SPI0_MOSI pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA13 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA21 periph B SPI1_MISO pin */
+							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B SPI1_MOSI pin */
+							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B SPI1_SPCK pin */
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
+							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma 0 AT91_DMA_CFG_PER_ID(21)>,
+				       <&dma 0 AT91_DMA_CFG_PER_ID(22)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			usart0: serial@f801c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf801c000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@f8028000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8028000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8010000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8010000 0x100>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma 1 AT91_DMA_CFG_PER_ID(14)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f8014000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8014000 0x100>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(15)>,
+				       <&dma 1 AT91_DMA_CFG_PER_ID(16)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				status = "disabled";
+			};
+
+			spi0: spi@f0000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0000000 0x100>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(1)>,
+				       <&dma 1 AT91_DMA_CFG_PER_ID(2)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@f0004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0004000 0x100>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma 1 AT91_DMA_CFG_PER_ID(4)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			watchdog@fffffe40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffe40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			rtc@fffffeb0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffeb0 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			pwm0: pwm@f8034000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xf8034000 0x300>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+				status = "disabled";
+			};
+
+			usb1: gadget@f803c000 {
+				compatible = "atmel,at91sam9260-udc";
+				reg = <0xf803c000 0x4000>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_SYSTEM 7>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+		};
+
+		usb0: usb@500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x00100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9x5-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x60000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9g45-nand-controller";
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts
index 5bea8c59b115..b06a54e8e237 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91sam9n12ek.dts - Device Tree file for AT91SAM9N12-EK board
  *
  *  Copyright (C) 2012 Atmel,
  *                2012 Hong Xu <hong.xu@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "at91sam9n12.dtsi"
@@ -18,7 +17,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x8000000>;
 	};
 
@@ -42,13 +41,25 @@
 				status = "okay";
 			};
 
+			tcb0: timer@f8008000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
 			i2c0: i2c@f8010000 {
 				status = "okay";
 
 				wm8904: codec@1a {
 					compatible = "wlf,wm8904";
 					reg = <0x1a>;
-					clocks = <&pck0>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 8>;
 					clock-names = "mclk";
 				};
 
@@ -108,7 +119,7 @@
 			spi0: spi@f0000000 {
 				status = "okay";
 				cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
@@ -169,7 +180,7 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: usb@500000 {
 			num-ports = <1>;
 			atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>;
 			status = "okay";
@@ -196,29 +207,29 @@
 	leds {
 		compatible = "gpio-leds";
 
-		d8 {
+		led-d8 {
 			label = "d8";
 			gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "mmc0";
 		};
 
-		d9 {
+		led-d9 {
 			label = "d9";
 			gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
 		};
 
-		d10 {
+		led-d10 {
 			label = "d10";
 			gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		enter {
+		button-enter {
 			label = "Enter";
 			gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
@@ -227,7 +238,7 @@
 	};
 
 	panel: panel {
-		compatible = "qiaodian,qd43003c0-40", "simple-panel";
+		compatible = "qiaodian,qd43003c0-40";
 		backlight = <&backlight>;
 		power-supply = <&panel_reg>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/microchip/at91sam9rl.dtsi b/arch/arm/boot/dts/microchip/at91sam9rl.dtsi
new file mode 100644
index 000000000000..de74cf2980a0
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9rl.dtsi
@@ -0,0 +1,861 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9rl.dtsi - Device Tree Include file for AT91SAM9RL family SoC
+ *
+ *  Copyright (C) 2014 Microchip
+ *  Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9RL family SoC";
+	compatible = "atmel,at91sam9rl", "atmel,at91sam9";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		pwm0 = &pwm0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x04000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x10000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fb0: fb@500000 {
+			compatible = "atmel,at91sam9rl-lcdc";
+			reg = <0x00500000 0x1000>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>;
+			clock-names = "hclk", "lcdc_clk";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9rl-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x80000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9g45-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffa0000 0x100>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>, <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			mmc0: mmc@fffa4000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffa4000 0x600>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fffa8000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfffa8000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@fffac000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfffac000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			usart0: serial@fffb0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffb4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffb8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fffbc000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffbc000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffc0000 {
+				compatible = "atmel,at91sam9rl-ssc";
+				reg = <0xfffc0000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffc4000 {
+				compatible = "atmel,at91sam9rl-ssc";
+				reg = <0xfffc4000 0x4000>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				status = "disabled";
+			};
+
+			pwm0: pwm@fffc8000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xfffc8000 0x300>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				clock-names = "pwm_clk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffcc000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffcc000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			adc0: adc@fffd0000 {
+				compatible = "atmel,at91sam9rl-adc";
+				reg = <0xfffd0000 0x100>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-use-external-triggers;
+				atmel,adc-channels-used = <0x3f>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-startup-time = <40>;
+			};
+
+			usb0: gadget@fffd4000 {
+				compatible = "atmel,at91sam9rl-udc";
+				reg = <0x00600000 0x100000>,
+				      <0xfffd4000 0x4000>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+
+			dma0: dma-controller@ffffe600 {
+				compatible = "atmel,at91sam9rl-dma";
+				reg = <0xffffe600 0x200>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+				clock-names = "dma_clk";
+			};
+
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			smc: smc@ffffec00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffec00 0x200>;
+			};
+
+			matrix: matrix@ffffee00 {
+				compatible = "atmel,at91sam9rl-matrix", "syscon";
+				reg = <0xffffee00 0x200>;
+			};
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				atmel,mux-mask =
+					/*    A         B     */
+					<0xffffffff 0xe05c6738>,  /* pioA */
+					<0xffffffff 0x0000c780>,  /* pioB */
+					<0xffffffff 0xe3ffff0e>,  /* pioC */
+					<0x003fffff 0x0001ff3c>;  /* pioD */
+
+				/* shared pinctrl settings */
+				adc0 {
+					pinctrl_adc0_ts: adc0_ts-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad0: adc0_ad0-0 {
+						atmel,pins = <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad1: adc0_ad1-0 {
+						atmel,pins = <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad2: adc0_ad2-0 {
+						atmel,pins = <AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad3: adc0_ad3-0 {
+						atmel,pins = <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad4: adc0_ad4-0 {
+						atmel,pins = <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad5: adc0_ad5-0 {
+						atmel,pins = <AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_adtrg: adc0_adtrg-0 {
+						atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ebi {
+					pinctrl_ebi_addr_nand: ebi-addr-0 {
+						atmel,pins =
+							<AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c_gpio0 {
+					pinctrl_i2c_gpio0: i2c_gpio0-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
+							<AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+					};
+				};
+
+				i2c_gpio1 {
+					pinctrl_i2c_gpio1: i2c_gpio1-0 {
+						atmel,pins =
+							<AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
+							<AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_oe_we: nand-oe-we-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
+						atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
+						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
+						atmel,pins = <AT91_PIOD 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
+						atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
+						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
+						atmel,pins = <AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
+						atmel,pins = <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
+						atmel,pins = <AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_2: pwm0_pwm2-2 {
+						atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
+						atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
+						atmel,pins = <AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOD 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_dcd: usart0_dcd-0 {
+						atmel,pins =
+							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_ri: usart0_ri-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_sck: usart0_sck-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_sck: usart1_sck-0 {
+						atmel,pins =
+							<AT91_PIOD 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_sck: usart2_sck-0 {
+						atmel,pins =
+							<AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOD 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_sck: usart3_sck-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				};
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9rl-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			reset-controller@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			poweroff@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			clk32k: clock-controller@fffffd50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffd50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd60 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd60 0x10>;
+				status = "disabled";
+			};
+
+			rtc@fffffe00 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffe00 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pioA 23 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 24 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio0>;
+		status = "disabled";
+	};
+
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio1>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/microchip/at91sam9rlek.dts
index 9047c168298a..a57351270551 100644
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9rlek.dts
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9rlek.dts - Device Tree file for Atmel at91sam9rl reference board
  *
- *  Copyright (C) 2014  Alexandre Belloni <alexandre.belloni@free-electrons.com>
- *
- * Licensed under GPLv2 only
+ *  Copyright (C) 2014 Microchip
+ *  Alexandre Belloni <alexandre.belloni@free-electrons.com>
  */
 /dts-v1/;
 #include "at91sam9rl.dtsi"
@@ -17,7 +17,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x4000000>;
 	};
 
@@ -32,11 +32,11 @@
 	};
 
 	ahb {
-		fb0: fb@00500000 {
+		fb0: fb@500000 {
 			display = <&display0>;
 			status = "okay";
 
-			display0: display {
+			display0: panel {
 				bits-per-pixel = <16>;
 				atmel,lcdcon-backlight;
 				atmel,dmacon = <0x1>;
@@ -124,6 +124,18 @@
 		};
 
 		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			mmc0: mmc@fffa4000 {
 				pinctrl-0 = <
 					&pinctrl_board_mmc0
@@ -168,7 +180,7 @@
 			spi0: spi@fffcc000 {
 				status = "okay";
 				cs-gpios = <&pioA 28 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <15000000>;
 					reg = <0>;
@@ -200,49 +212,53 @@
 				status = "okay";
 			};
 
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+			};
+
 			rtc@fffffe00 {
 				status = "okay";
 			};
 		};
 	};
 
-	pwmleds {
+	led-controller-1 {
 		compatible = "pwm-leds";
 
-		ds1 {
+		led-1 {
 			label = "ds1";
 			pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
 			max-brightness = <255>;
 		};
 
-		ds2 {
+		led-2 {
 			label = "ds2";
 			pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>;
 			max-brightness = <255>;
 		};
 	};
 
-	leds {
+	led-controller-2 {
 		compatible = "gpio-leds";
 
-		ds3 {
+		led-3 {
 			label = "ds3";
 			gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		right_click {
+		button-right-click {
 			label = "right_click";
 			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
 			wakeup-source;
 		};
 
-		left_click {
+		button-left-click {
 			label = "left_click";
 			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/microchip/at91sam9x25.dtsi
index 3c5fa3388997..7036f5f04571 100644
--- a/arch/arm/boot/dts/at91sam9x25.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x25.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9x25.dtsi - Device Tree Include file for AT91SAM9X25 SoC
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 
 #include "at91sam9x5.dtsi"
@@ -27,6 +26,10 @@
 				       0x003fffff 0x003f8000 0x00000000  /* pioD */
 				      >;
 			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9x25-pmc", "atmel,at91sam9x5-pmc", "syscon";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/microchip/at91sam9x25ek.dts b/arch/arm/boot/dts/microchip/at91sam9x25ek.dts
new file mode 100644
index 000000000000..ad7c6b36f0ba
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9x25ek.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9x25ek.dts - Device Tree file for AT91SAM9X25-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9x25.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X25-EK";
+	compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&macb1 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_pwm0_1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/microchip/at91sam9x35.dtsi
index d9054e8167b7..eb03b0497e37 100644
--- a/arch/arm/boot/dts/at91sam9x35.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x35.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9x35.dtsi - Device Tree Include file for AT91SAM9X35 SoC
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 
 #include "at91sam9x5.dtsi"
@@ -26,6 +25,10 @@
 				       0x003fffff 0x003f8000 0x00000000  /* pioD */
 				      >;
 			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9x35-pmc", "atmel,at91sam9x5-pmc", "syscon";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/microchip/at91sam9x35ek.dts b/arch/arm/boot/dts/microchip/at91sam9x35ek.dts
new file mode 100644
index 000000000000..66675c787b97
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9x35ek.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9x35ek.dts - Device Tree file for AT91SAM9X35-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9x35.dtsi"
+#include "at91sam9x5dm.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X35-EK";
+	compatible = "atmel,at91sam9x35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&bl_reg {
+	status = "okay";
+};
+
+&hlcdc {
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&panel {
+	status = "okay";
+};
+
+&panel_reg {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9x5.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi
new file mode 100644
index 000000000000..9070fd06995a
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi
@@ -0,0 +1,975 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
+ *                   applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35,
+ *                   AT91SAM9X25, AT91SAM9X35 SoC
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9x5 family SoC";
+	compatible = "atmel,at91sam9x5";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		ssc0 = &ssc0;
+		pwm0 = &pwm0;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x8000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
+			};
+
+			matrix: matrix@ffffde00 {
+				compatible = "atmel,at91sam9x5-matrix", "syscon";
+				reg = <0xffffde00 0x100>;
+			};
+
+			pmecc: ecc-engine@ffffe000 {
+				compatible = "atmel,at91sam9g45-pmecc";
+				reg = <0xffffe000 0x600>,
+				      <0xffffe600 0x200>;
+			};
+
+			ramc0: ramc@ffffe800 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe800 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
+				clock-names = "ddrck";
+			};
+
+			smc: smc@ffffea00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffea00 0x200>;
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,at91sam9x5-pmc", "syscon";
+				reg = <0xfffffc00 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			reset_controller: reset-controller@fffffe00 {
+				compatible = "atmel,at91sam9g45-rstc";
+				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shutdown_controller: poweroff@fffffe10 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffe30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			clk32k: clock-controller@fffffe50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffe50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
+			};
+
+			tcb0: timer@f8008000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8008000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			tcb1: timer@f800c000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf800c000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			dma0: dma-controller@ffffec00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffec00 0x200>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				clock-names = "dma_clk";
+			};
+
+			dma1: dma-controller@ffffee00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffee00 0x200>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+				clock-names = "dma_clk";
+			};
+
+			pinctrl: pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91sam9x5-pinctrl", "simple-mfd";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ebi {
+					pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_data_8_15: ebi-data-msb-0 {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_addr_nand: ebi-addr-0 {
+						atmel,pins =
+							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA3 periph A */
+					};
+
+					pinctrl_usart0_sck: usart0_sck-0 {
+						atmel,pins =
+							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA4 periph A */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC27 periph C */
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC28 periph C */
+					};
+
+					pinctrl_usart1_sck: usart1_sck-0 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC29 periph C */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
+					};
+
+					pinctrl_usart2_sck: usart2_sck-0 {
+						atmel,pins =
+							<AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB2 periph B */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC8 periph C */
+							 AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;	/* PC9 periph C with pullup */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC16 periph C */
+							 AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;	/* PC17 periph C with pullup */
+					};
+				};
+
+				nand {
+					pinctrl_nand_oe_we: nand-oe-we-0 {
+						atmel,pins =
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA16 periph A with pullup */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA15 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA18 periph A with pullup */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA19 periph A with pullup */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA20 periph A with pullup */
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA13 periph B */
+							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA12 periph B with pullup */
+							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA11 periph B with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA2 periph B with pullup */
+							 AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA3 periph B with pullup */
+							 AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA4 periph B with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
+							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
+							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA26 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A SPI0_MISO pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A SPI0_MOSI pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA13 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA21 periph B SPI1_MISO pin */
+							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B SPI1_MOSI pin */
+							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B SPI1_SPCK pin */
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA30 periph A I2C0 data */
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA31 periph A I2C0 clock */
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC0 periph C I2C1 data */
+							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC1 periph C I2C1 clock */
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2: i2c2-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB4 periph B I2C2 data */
+							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB5 periph B I2C2 clock */
+					};
+				};
+
+				i2c_gpio0 {
+					pinctrl_i2c_gpio0: i2c_gpio0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PA30 gpio multidrive I2C0 data */
+							 AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PA31 gpio multidrive I2C0 clock */
+					};
+				};
+
+				i2c_gpio1 {
+					pinctrl_i2c_gpio1: i2c_gpio1-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PC0 gpio multidrive I2C1 data */
+							 AT91_PIOC 1 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PC1 gpio multidrive I2C1 clock */
+					};
+				};
+
+				i2c_gpio2 {
+					pinctrl_i2c_gpio2: i2c_gpio2-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PB4 gpio multidrive I2C2 data */
+							 AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PB5 gpio multidrive I2C2 clock */
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
+						atmel,pins =
+							<AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
+						atmel,pins =
+							<AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
+						atmel,pins =
+							<AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
+						atmel,pins =
+							<AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
+						atmel,pins =
+							<AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
+						atmel,pins =
+							<AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <19>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <22>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+			};
+
+			ssc0: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(14)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			mmc0: mmc@f0008000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf0008000 0x600>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "mci_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			mmc1: mmc@f000c000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf000c000 0x600>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
+				clock-names = "mci_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>,
+				       <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart0: serial@f801c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf801c000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>,
+				       <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>,
+				       <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8010000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8010000 0x100>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>,
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(8)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f8014000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8014000 0x100>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>,
+				       <&dma1 1 AT91_DMA_CFG_PER_ID(6)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@f8018000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8018000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>,
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(10)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				status = "disabled";
+			};
+
+			uart0: serial@f8040000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8040000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@f8044000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8044000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			adc0: adc@f804c000 {
+				compatible = "atmel,at91sam9x5-adc";
+				reg = <0xf804c000 0x100>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>,
+					 <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-use-external-triggers;
+				atmel,adc-channels-used = <0xffff>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-sample-hold-time = <11>;
+			};
+
+			spi0: spi@f0000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0000000 0x100>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(1)>,
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(2)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@f0004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0004000 0x100>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(1)>,
+				       <&dma1 1 AT91_DMA_CFG_PER_ID(2)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			usb2: gadget@f803c000 {
+				compatible = "atmel,at91sam9g45-udc";
+				reg = <0x00500000 0x80000
+				       0xf803c000 0x400>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 23>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			watchdog: watchdog@fffffe40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffe40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			rtc: rtc@fffffeb0 {
+				compatible = "atmel,at91sam9x5-rtc";
+				reg = <0xfffffeb0 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			pwm0: pwm@f8034000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xf8034000 0x300>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		usb0: usb@600000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb1: usb@700000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9x5-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x60000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9g45-nand-controller";
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio0>;
+		status = "disabled";
+	};
+
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioC 1 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio1>;
+		status = "disabled";
+	};
+
+	i2c-gpio-2 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pioB 4 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioB 5 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio2>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5_can.dtsi
index 8eb2f9c1b978..04ccb25d342c 100644
--- a/arch/arm/boot/dts/at91sam9x5_can.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5_can.dtsi
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9x5_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
  * Ethernet interface.
  *
  * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2.
  */
 
 #include <dt-bindings/pinctrl/at91.h>
@@ -13,27 +12,13 @@
 / {
 	ahb {
 		apb {
-			pmc: pmc@fffffc00 {
-				periphck {
-					can0_clk: can0_clk {
-						#clock-cells = <0>;
-						reg = <29>;
-					};
-
-					can1_clk: can1_clk {
-						#clock-cells = <0>;
-						reg = <30>;
-					};
-				};
-			};
-
 			can0: can@f8000000 {
 				compatible = "atmel,at91sam9x5-can";
 				reg = <0xf8000000 0x300>;
 				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_can0_rx_tx>;
-				clocks = <&can0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
 				clock-names = "can_clk";
 				status = "disabled";
 			};
@@ -44,7 +29,7 @@
 				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_can1_rx_tx>;
-				clocks = <&can1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
 				clock-names = "can_clk";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/at91sam9x5_isi.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5_isi.dtsi
index 8fc45ca4dcb5..4ce98f05d7db 100644
--- a/arch/arm/boot/dts/at91sam9x5_isi.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5_isi.dtsi
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9x5_isi.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
  * Image Sensor Interface.
  *
  * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2.
  */
 
 #include <dt-bindings/pinctrl/at91.h>
@@ -44,22 +43,13 @@
 				};
 			};
 
-			pmc: pmc@fffffc00 {
-				periphck {
-					isi_clk: isi_clk {
-						#clock-cells = <0>;
-						reg = <25>;
-					};
-				};
-			};
-
 			isi: isi@f8048000 {
 				compatible = "atmel,at91sam9g45-isi";
 				reg = <0xf8048000 0x4000>;
 				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_isi_data_0_7>;
-				clocks = <&isi_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
 				clock-names = "isi_clk";
 				status = "disabled";
 				port {
diff --git a/arch/arm/boot/dts/microchip/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5_lcd.dtsi
new file mode 100644
index 000000000000..f81c9d1691e0
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9x5_lcd.dtsi
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x5_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
+ * LCD controller.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			hlcdc: hlcdc@f8038000 {
+				compatible = "atmel,at91sam9x5-hlcdc";
+				reg = <0xf8038000 0x4000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	lcd {
+		pinctrl_lcd_base: lcd-base-0 {
+			atmel,pins =
+				<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+				 AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+				 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
+				 AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+				 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+		};
+
+		pinctrl_lcd_pwm: lcd-pwm-0 {
+			atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+		};
+
+		pinctrl_lcd_rgb444: lcd-rgb-0 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+				 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+				 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+				 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+				 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+				 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+				 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+				 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+				 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+				 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+				 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+				 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD11 pin */
+		};
+
+		pinctrl_lcd_rgb565: lcd-rgb-1 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+				 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+				 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+				 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+				 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+				 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+				 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+				 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+				 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+				 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+				 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+				 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+				 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+				 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+				 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+				 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD15 pin */
+		};
+
+		pinctrl_lcd_rgb666: lcd-rgb-2 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+				 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+				 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+				 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+				 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+				 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+				 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+				 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+				 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+				 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+				 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+				 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+				 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+				 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+				 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+				 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+				 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+				 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD17 pin */
+		};
+
+		pinctrl_lcd_rgb888: lcd-rgb-3 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+				 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+				 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+				 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+				 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+				 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+				 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+				 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+				 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+				 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+				 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+				 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+				 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+				 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+				 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+				 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+				 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+				 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+				 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+				 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+				 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+				 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+				 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+				 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5_macb0.dtsi
index 73d7e30965ba..222aa30f6860 100644
--- a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5_macb0.dtsi
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
  * Ethernet interface.
  *
  * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2.
  */
 
 #include <dt-bindings/pinctrl/at91.h>
@@ -43,22 +42,13 @@
 				};
 			};
 
-			pmc: pmc@fffffc00 {
-				periphck {
-					macb0_clk: macb0_clk {
-						#clock-cells = <0>;
-						reg = <24>;
-					};
-				};
-			};
-
 			macb0: ethernet@f802c000 {
 				compatible = "cdns,at91sam9260-macb", "cdns,macb";
 				reg = <0xf802c000 0x100>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_rmii>;
-				clocks = <&macb0_clk>, <&macb0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5_macb1.dtsi
index d81980c40c7d..26bf9b5de9ee 100644
--- a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5_macb1.dtsi
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9x5_macb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 2
  * Ethernet interfaces.
  *
  * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2.
  */
 
 #include <dt-bindings/pinctrl/at91.h>
@@ -31,22 +30,13 @@
 				};
 			};
 
-			pmc: pmc@fffffc00 {
-				periphck {
-					macb1_clk: macb1_clk {
-						#clock-cells = <0>;
-						reg = <27>;
-					};
-				};
-			};
-
 			macb1: ethernet@f8030000 {
 				compatible = "cdns,at91sam9260-macb", "cdns,macb";
 				reg = <0xf8030000 0x100>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb1_rmii>;
-				clocks = <&macb1_clk>, <&macb1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5_usart3.dtsi
index 43bb5b51caa6..a47c765e1b20 100644
--- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5_usart3.dtsi
@@ -1,14 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9x5_usart3.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
  * 4 USART.
  *
  * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2.
  */
 
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	aliases {
@@ -21,8 +21,8 @@
 				usart3 {
 					pinctrl_usart3: usart3-0 {
 						atmel,pins =
-							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PC22 periph B with pullup */
-							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC23 periph B */
+							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart3_rts: usart3_rts-0 {
@@ -42,25 +42,17 @@
 				};
 			};
 
-			pmc: pmc@fffffc00 {
-				periphck {
-					usart3_clk: usart3_clk {
-						#clock-cells = <0>;
-						reg = <8>;
-					};
-				};
-			};
-
 			usart3: serial@f8028000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8028000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
 				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(14)>,
 				       <&dma1 1 (AT91_DMA_CFG_PER_ID(15) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 				dma-names = "tx", "rx";
-				clocks = <&usart3_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 				clock-names = "usart";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi
index bdeaa0b64a5b..fb3c19bdfcb6 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi
@@ -1,14 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91sam9x5cm.dtsi - Device Tree Include file for AT91SAM9x5 CPU Module
  *
  *  Copyright (C) 2012 Atmel,
  *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 
 / {
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x8000000>;
 	};
 
@@ -24,6 +23,18 @@
 
 	ahb {
 		apb {
+			tcb0: timer@f8008000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
 			pinctrl@fffff400 {
 				1wire_cm {
 					pinctrl_1wire_cm: 1wire_cm-0 {
@@ -73,12 +84,22 @@
 
 						uboot@40000 {
 							label = "u-boot";
-							reg = <0x40000 0x80000>;
+							reg = <0x40000 0xc0000>;
+						};
+
+						ubootenvred@100000 {
+							label = "U-Boot Env Redundant";
+							reg = <0x100000 0x40000>;
 						};
 
-						ubootenv@c0000 {
+						ubootenv@140000 {
 							label = "U-Boot Env";
-							reg = <0xc0000 0x140000>;
+							reg = <0x140000 0x40000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
 						};
 
 						kernel@200000 {
@@ -88,7 +109,7 @@
 
 						rootfs@800000 {
 							label = "rootfs";
-							reg = <0x800000 0x1f800000>;
+							reg = <0x800000 0x0f800000>;
 						};
 					};
 				};
@@ -99,13 +120,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		pb18 {
+		led-pb18 {
 			label = "pb18";
 			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		pd21 {
+		led-pd21 {
 			label = "pd21";
 			gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/microchip/at91sam9x5dm.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5dm.dtsi
new file mode 100644
index 000000000000..a9278038af3b
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9x5dm.dtsi
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9x5dm.dtsi - Device Tree file for SAM9x5 display module
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Free Electrons
+ *
+ *  Author: Boris Brezillon <boris.brezillon@free-electrons.com>
+ */
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&bl_reg>;
+		status = "disabled";
+	};
+
+	bl_reg: backlight_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight-power-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		status = "disabled";
+	};
+
+	panel: panel {
+		compatible = "foxlink,fl500wvr00-a0t";
+		backlight = <&backlight>;
+		power-supply = <&panel_reg>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	panel_reg: panel_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-power-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		status = "disabled";
+	};
+};
+
+&adc0 {
+	atmel,adc-ts-wires = <4>;
+	atmel,adc-ts-pressure-threshold = <10000>;
+	status = "okay";
+};
+
+&i2c0 {
+	keyboard@1b {
+		compatible = "qt1070";
+		reg = <0x1b>;
+		interrupt-parent = <&pioA>;
+		interrupts = <7 0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qt1070_irq>;
+		wakeup-source;
+	};
+};
+
+&hlcdc {
+	hlcdc-display-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+		port@0 {
+			hlcdc_panel_output: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_input>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_qt1070_irq: qt1070_irq {
+			atmel,pins =
+				<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9x5ek.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5ek.dtsi
new file mode 100644
index 000000000000..9618b8d965b0
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9x5ek.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+#include "at91sam9x5cm.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X5-EK";
+	compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	sound {
+		compatible = "atmel,sam9x5-wm8731-audio";
+
+		atmel,model = "wm8731 @ AT91SAM9X5EK";
+
+		atmel,audio-routing =
+			"Headphone Jack", "RHPOUT",
+			"Headphone Jack", "LHPOUT",
+			"LLINEIN", "Line In Jack",
+			"RLINEIN", "Line In Jack";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8731>;
+	};
+};
+
+&adc0 {
+	atmel,adc-ts-wires = <4>;
+	atmel,adc-ts-pressure-threshold = <10000>;
+	status = "okay";
+};
+
+&dbgu {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	wm8731: wm8731@1a {
+		compatible = "wm8731";
+		reg = <0x1a>;
+	};
+};
+
+&mmc0 {
+	pinctrl-0 = <
+		&pinctrl_board_mmc0
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mmc1 {
+	pinctrl-0 = <
+		&pinctrl_board_mmc1
+		&pinctrl_mmc1_slot0_clk_cmd_dat0
+		&pinctrl_mmc1_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl {
+	camera_sensor {
+		pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
+			atmel,pins =
+				<AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_MCK */
+		};
+
+		pinctrl_sensor_power: sensor_power-0 {
+			atmel,pins =
+				<AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_sensor_reset: sensor_reset-0 {
+			atmel,pins =
+				<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	mmc0 {
+		pinctrl_board_mmc0: mmc0-board {
+			atmel,pins =
+				<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
+		};
+	};
+
+	mmc1 {
+		pinctrl_board_mmc1: mmc1-board {
+			atmel,pins =
+				<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD14 gpio CD pin pull up and deglitch */
+		};
+	};
+
+	usb2 {
+		pinctrl_board_usb2: usb2-board {
+			atmel,pins =
+				<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB16 gpio vbus sense, deglitch */
+		};
+	};
+};
+
+&spi0 {
+	cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
+	status = "disabled"; /* conflicts with mmc1 */
+
+	flash@0 {
+		compatible = "atmel,at25df321a";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&ssc0 {
+	status = "okay";
+};
+
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
+			   &pioD 19 GPIO_ACTIVE_LOW
+			   &pioD 20 GPIO_ACTIVE_LOW
+			  >;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_board_usb2>;
+	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9xe.dtsi b/arch/arm/boot/dts/microchip/at91sam9xe.dtsi
new file mode 100644
index 000000000000..f571f77779c3
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91sam9xe.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91sam9xe.dtsi - Device Tree Include file for AT91SAM9XE family SoC
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Alexandre Belloni <alexandre.Belloni@free-electrons.com>
+ */
+
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9XE family SoC";
+	compatible = "atmel,at91sam9xe", "atmel,at91sam9260";
+
+	sram0: sram@2ff000 {
+		status = "disabled";
+	};
+
+	sram1: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x4000>;
+	};
+};
diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/microchip/ethernut5.dts
index 123b203be06c..52ccef31b391 100644
--- a/arch/arm/boot/dts/ethernut5.dts
+++ b/arch/arm/boot/dts/microchip/ethernut5.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * ethernut5.dts - Device Tree file for Ethernut 5 board
  *
  * Copyright (C) 2012 egnite GmbH <info@egnite.de>
- *
- * Licensed under GPLv2.
  */
 /dts-v1/;
 #include "at91sam9xe.dtsi"
@@ -16,7 +15,7 @@
 		bootargs = "console=ttyS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x08000000>;
 	};
 
@@ -36,6 +35,18 @@
 				status = "okay";
 			};
 
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			usart0: serial@fffb0000 {
 				status = "okay";
 			};
@@ -90,7 +101,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/microchip/evk-pro3.dts
index 20a4481b6e12..40c5111c2f0a 100644
--- a/arch/arm/boot/dts/evk-pro3.dts
+++ b/arch/arm/boot/dts/microchip/evk-pro3.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * evk-pro3.dts - Device Tree file for Telit EVK-PRO3 with Telit GE863-PRO3
  *
  * Copyright (C) 2012 Telit,
  *               2012 Fabio Porcedda <fabio.porcedda@gmail.com>
- *
- * Licensed under GPLv2 or later.
  */
 
 /dts-v1/;
@@ -46,7 +45,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/microchip/ge863-pro3.dtsi
index 8613944ea5c5..dbba33e5a06c 100644
--- a/arch/arm/boot/dts/ge863-pro3.dtsi
+++ b/arch/arm/boot/dts/microchip/ge863-pro3.dtsi
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * ge863_pro3.dtsi - Device Tree file for Telit GE863-PRO3
  *
  * Copyright (C) 2012 Telit,
  *               2012 Fabio Porcedda <fabio.porcedda@gmail.com>
- *
- * Licensed under GPLv2 or later.
  */
 
 #include "at91sam9260.dtsi"
@@ -18,6 +17,18 @@
 
 	ahb {
 		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			dbgu: serial@fffff200 {
 				status = "okay";
 			};
@@ -50,7 +61,7 @@
 							reg = <0x0 0x7c0000>;
 						};
 
-						root@07c0000 {
+						root@7c0000 {
 							label = "root";
 							reg = <0x7c0000 0x7840000>;
 						};
diff --git a/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts b/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
new file mode 100644
index 000000000000..0f555eb45bda
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for the Kontron KSwitch D10 MMT 6G-2GS
+ */
+
+/dts-v1/;
+#include "lan966x-kontron-kswitch-d10-mmt.dtsi"
+
+/ {
+	model = "Kontron KSwitch D10 MMT 6G-2GS";
+	compatible = "kontron,kswitch-d10-mmt-6g-2gs", "kontron,s1921",
+		     "microchip,lan9668", "microchip,lan966";
+
+	aliases {
+		i2c0 = &i2c4;
+		i2c1 = &i2c1;
+	};
+
+	sfp0: sfp0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c4>;
+		los-gpios = <&sgpio_in 1 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in 1 1 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <2500>;
+		tx-disable-gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in 0 2 GPIO_ACTIVE_HIGH>;
+		rate-select0-gpios = <&sgpio_out 2 0 GPIO_ACTIVE_HIGH>;
+		rate-select1-gpios = <&sgpio_out 2 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp1: sfp1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		los-gpios = <&sgpio_in 1 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in 1 3 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <2500>;
+		tx-disable-gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in 0 3 GPIO_ACTIVE_HIGH>;
+		rate-select0-gpios = <&sgpio_out 2 2 GPIO_ACTIVE_HIGH>;
+		rate-select1-gpios = <&sgpio_out 2 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c1: i2c@600 {
+		pinctrl-0 = <&fc1_c_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c4: i2c@600 {
+		pinctrl-0 = <&fc4_b_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&gpio {
+	fc1_c_pins: fc1-c-i2c-pins {
+		/* SCL, SDA */
+		pins = "GPIO_47", "GPIO_48";
+		function = "fc1_c";
+	};
+
+	fc4_b_pins: fc4-b-i2c-pins {
+		/* SCL, SDA */
+		pins = "GPIO_57", "GPIO_58";
+		function = "fc4_b";
+	};
+};
+
+&port2 {
+	phys = <&serdes 2 SERDES6G(0)>;
+	sfp = <&sfp0>;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&port3 {
+	phys = <&serdes 3 SERDES6G(1)>;
+	sfp = <&sfp1>;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt-8g.dts b/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt-8g.dts
new file mode 100644
index 000000000000..ad5d8b56e6fa
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt-8g.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for the Kontron KSwitch D10 MMT 8G
+ */
+
+/dts-v1/;
+#include "lan966x-kontron-kswitch-d10-mmt.dtsi"
+
+/ {
+	model = "Kontron KSwitch D10 MMT 8G";
+	compatible = "kontron,kswitch-d10-mmt-8g", "kontron,s1921",
+		     "microchip,lan9668", "microchip,lan966";
+};
+
+&mdio0 {
+	phy2: ethernet-phy@3 {
+		reg = <3>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	phy3: ethernet-phy@4 {
+		reg = <4>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&port2 {
+	phys = <&serdes 2 SERDES6G(0)>;
+	phy-handle = <&phy2>;
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	status = "okay";
+};
+
+&port3 {
+	phys = <&serdes 3 SERDES6G(1)>;
+	phy-handle = <&phy3>;
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt.dtsi b/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt.dtsi
new file mode 100644
index 000000000000..426893750d51
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt.dtsi
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Common part of the device tree for the Kontron KSwitch D10 MMT
+ */
+
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	aliases {
+		serial0 = &usart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		pinctrl-0 = <&reset_pins>;
+		pinctrl-names = "default";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	usart0: serial@200 {
+		pinctrl-0 = <&usart0_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi3: spi@400 {
+		pinctrl-0 = <&fc3_b_pins>, <&spi3_cs_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+		cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&gpio {
+	pinctrl-0 = <&phy_int_pins>;
+	pinctrl-names = "default";
+
+	fc3_b_pins: fc3-b-pins {
+		/* SCK, MISO, MOSI */
+		pins = "GPIO_51", "GPIO_52", "GPIO_53";
+		function = "fc3_b";
+	};
+
+	miim_c_pins: miim-c-pins {
+		/* MDC, MDIO */
+		pins = "GPIO_59", "GPIO_60";
+		function = "miim_c";
+	};
+
+	phy_int_pins: phy-int-pins {
+		/* PHY_INT# */
+		pins = "GPIO_24";
+		function = "gpio";
+	};
+
+	reset_pins: reset-pins {
+		/* SYS_RST# */
+		pins = "GPIO_56";
+		function = "gpio";
+	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1 */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34";
+		function = "sgpio_a";
+	};
+
+	sgpio_b_pins: sgpio-b-pins {
+		/* LD */
+		pins = "GPIO_64";
+		function = "sgpio_b";
+	};
+
+	spi3_cs_pins: spi3-cs-pins {
+		/* CS# */
+		pins = "GPIO_46";
+		function = "gpio";
+	};
+
+	usart0_pins: usart0-pins {
+		/* RXD, TXD */
+		pins = "GPIO_25", "GPIO_26";
+		function = "fc0_b";
+	};
+
+	usbs_a_pins: usbs-a-pins {
+		/* VBUS_DET */
+		pins = "GPIO_66";
+		function = "gpio";
+	};
+};
+
+&mdio0 {
+	pinctrl-0 = <&miim_c_pins>;
+	pinctrl-names = "default";
+	reset-gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+	clock-frequency = <2500000>;
+	status = "okay";
+
+	phy4: ethernet-phy@5 {
+		reg = <5>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
+	};
+
+	phy5: ethernet-phy@6 {
+		reg = <6>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
+	};
+
+	phy6: ethernet-phy@7 {
+		reg = <7>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
+	};
+
+	phy7: ethernet-phy@8 {
+		reg = <8>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
+	};
+};
+
+&mdio1 {
+	status = "okay";
+};
+
+&phy0 {
+	status = "okay";
+};
+
+&phy1 {
+	status = "okay";
+};
+
+&port0 {
+	phys = <&serdes 0 CU(0)>;
+	phy-handle = <&phy0>;
+	phy-mode = "gmii";
+	status = "okay";
+};
+
+&port1 {
+	phys = <&serdes 1 CU(1)>;
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+	status = "okay";
+};
+
+&port4 {
+	phys = <&serdes 4 SERDES6G(2)>;
+	phy-handle = <&phy4>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&port5 {
+	phys = <&serdes 5 SERDES6G(2)>;
+	phy-handle = <&phy5>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&port6 {
+	phys = <&serdes 6 SERDES6G(2)>;
+	phy-handle = <&phy6>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&port7 {
+	phys = <&serdes 7 SERDES6G(2)>;
+	phy-handle = <&phy7>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>, <&sgpio_b_pins>;
+	pinctrl-names = "default";
+	bus-frequency = <8000000>;
+	/* arbitrary range because all GPIOs are in software mode */
+	microchip,sgpio-port-ranges = <0 11>;
+	status = "okay";
+
+	sgpio_in: gpio@0 {
+		ngpios = <128>;
+	};
+
+	sgpio_out: gpio@1 {
+		ngpios = <128>;
+	};
+};
+
+&switch {
+	status = "okay";
+};
+
+&udc {
+	pinctrl-0 = <&usbs_a_pins>;
+	pinctrl-names = "default";
+	atmel,vbus-gpio = <&gpio 66 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/lan966x-pcb8290.dts b/arch/arm/boot/dts/microchip/lan966x-pcb8290.dts
new file mode 100644
index 000000000000..3b7577e48b46
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/lan966x-pcb8290.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x-pcb8290.dts - Device Tree file for LAN966X-PCB8290 board
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Horatiu Vultur <horatiu.vultur@microchip.com>
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	model = "Microchip EVB LAN9668";
+	compatible = "microchip,lan9668-pcb8290", "microchip,lan9668", "microchip,lan966";
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+&aes {
+	status = "disabled"; /* Reserved by secure OS */
+};
+
+&gpio {
+	miim_a_pins: mdio-pins {
+		/* MDC, MDIO */
+		pins = "GPIO_28", "GPIO_29";
+		function = "miim_a";
+	};
+
+	pps_out_pins: pps-out-pins {
+		/* 1pps output */
+		pins = "GPIO_38";
+		function = "ptpsync_3";
+	};
+
+	ptp_ext_pins: ptp-ext-pins {
+		/* 1pps input */
+		pins = "GPIO_35";
+		function = "ptpsync_0";
+	};
+
+	udc_pins: ucd-pins {
+		/* VBUS_DET B */
+		pins = "GPIO_8";
+		function = "usb_slave_b";
+	};
+};
+
+&mdio0 {
+	pinctrl-0 = <&miim_a_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ext_phy0: ethernet-phy@7 {
+		reg = <7>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy1: ethernet-phy@8 {
+		reg = <8>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy2: ethernet-phy@9 {
+		reg = <9>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy3: ethernet-phy@10 {
+		reg = <10>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy4: ethernet-phy@15 {
+		reg = <15>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy5: ethernet-phy@16 {
+		reg = <16>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy6: ethernet-phy@17 {
+		reg = <17>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy7: ethernet-phy@18 {
+		reg = <18>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+};
+
+&port0 {
+	reg = <2>;
+	phy-handle = <&ext_phy2>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 0 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port1 {
+	reg = <3>;
+	phy-handle = <&ext_phy3>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 1 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port2 {
+	reg = <0>;
+	phy-handle = <&ext_phy0>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 2 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port3 {
+	reg = <1>;
+	phy-handle = <&ext_phy1>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 3 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port4 {
+	reg = <6>;
+	phy-handle = <&ext_phy6>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 4 SERDES6G(2)>;
+	status = "okay";
+};
+
+&port5 {
+	reg = <7>;
+	phy-handle = <&ext_phy7>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 5 SERDES6G(2)>;
+	status = "okay";
+};
+
+&port6 {
+	reg = <4>;
+	phy-handle = <&ext_phy4>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 6 SERDES6G(2)>;
+	status = "okay";
+};
+
+&port7 {
+	reg = <5>;
+	phy-handle = <&ext_phy5>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 7 SERDES6G(2)>;
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&switch {
+	pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&udc {
+	pinctrl-0 = <&udc_pins>;
+	pinctrl-names = "default";
+	atmel,vbus-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/lan966x-pcb8291.dts b/arch/arm/boot/dts/microchip/lan966x-pcb8291.dts
new file mode 100644
index 000000000000..3a3d76af8612
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/lan966x-pcb8291.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x_pcb8291.dts - Device Tree file for PCB8291
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	model = "Microchip EVB - LAN9662";
+	compatible = "microchip,lan9662-pcb8291", "microchip,lan9662", "microchip,lan966";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &usart3;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-s0-blue {
+			label = "s0:blue";
+			gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s0-green {
+			label = "s0:green";
+			gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-blue {
+			label = "s1:blue";
+			gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-green {
+			label = "s1:green";
+			gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&aes {
+	status = "disabled"; /* Reserved by secure OS */
+};
+
+&gpio {
+	fc3_b_pins: fc3-b-pins {
+		/* RX, TX */
+		pins = "GPIO_52", "GPIO_53";
+		function = "fc3_b";
+	};
+
+	can0_b_pins:  can0-b-pins {
+		/* RX, TX */
+		pins = "GPIO_35", "GPIO_36";
+		function = "can0_b";
+	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1, LD */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
+		function = "sgpio_a";
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&can0_b_pins>;
+	pinctrl-names = "default";
+	status = "disabled"; /* Conflict with switch */
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	usart3: serial@200 {
+		pinctrl-0 = <&fc3_b_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&mdio1 {
+	status = "okay";
+};
+
+&phy0 {
+	status = "okay";
+};
+
+&phy1 {
+	status = "okay";
+};
+
+&port0 {
+	phy-handle = <&phy0>;
+	phy-mode = "gmii";
+	phys = <&serdes 0 CU(0)>;
+	status = "okay";
+};
+
+&port1 {
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+	phys = <&serdes 1 CU(1)>;
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>;
+	pinctrl-names = "default";
+	microchip,sgpio-port-ranges = <0 3>, <8 11>;
+	status = "okay";
+
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
+&switch {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/lan966x-pcb8309.dts b/arch/arm/boot/dts/microchip/lan966x-pcb8309.dts
new file mode 100644
index 000000000000..0cb505f79ba1
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/lan966x-pcb8309.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x_pcb8309.dts - Device Tree file for PCB8309
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	model = "Microchip EVB - LAN9662";
+	compatible = "microchip,lan9662-pcb8309", "microchip,lan9662", "microchip,lan966";
+
+	aliases {
+		serial0 = &usart3;
+		i2c102 = &i2c102;
+		i2c103 = &i2c103;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-controls = <&mux>;
+		i2c-parent = <&i2c4>;
+
+		i2c102: i2c-sfp@1 {
+			reg = <1>;
+		};
+
+		i2c103: i2c-sfp@2 {
+			reg = <2>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-s0-green {
+			label = "s0:green";
+			gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s0-red {
+			label = "s0:red";
+			gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-green {
+			label = "s1:green";
+			gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-red {
+			label = "s1:red";
+			gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&sgpio_out 11 0 GPIO_ACTIVE_HIGH>, /* p11b0 */
+			    <&sgpio_out 11 1 GPIO_ACTIVE_HIGH>; /* p11b1 */
+	};
+
+	sfp2: sfp2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c102>;
+		tx-disable-gpios = <&sgpio_out 10 0 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in  2 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in  2 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in  1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp3: sfp3 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c103>;
+		tx-disable-gpios = <&sgpio_out 10 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in  3 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in  3 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in  1 1 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&aes {
+	status = "disabled"; /* Reserved by secure OS */
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	usart3: serial@200 {
+		pinctrl-0 = <&fc3_b_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c4: i2c@600 {
+		compatible = "microchip,sam9x60-i2c";
+		reg = <0x600 0x200>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&nic_clk>;
+		pinctrl-0 = <&fc4_b_pins>;
+		pinctrl-names = "default";
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		i2c-sda-hold-time-ns = <1500>;
+		status = "okay";
+	};
+};
+
+&gpio {
+	fc3_b_pins: fc3-b-pins {
+		/* RXD, TXD */
+		pins = "GPIO_52", "GPIO_53";
+		function = "fc3_b";
+	};
+
+	fc4_b_pins: fc4-b-pins {
+		/* SCL, SDA */
+		pins = "GPIO_57", "GPIO_58";
+		function = "fc4_b";
+	};
+
+	pps_out_pins: pps-out-pins {
+		/* 1pps output */
+		pins = "GPIO_38";
+		function = "ptpsync_3";
+	};
+
+	ptp_ext_pins: ptp-ext-pins {
+		/* 1pps input */
+		pins = "GPIO_39";
+		function = "ptpsync_4";
+	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1, LD */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
+		function = "sgpio_a";
+	};
+};
+
+&mdio1 {
+	status = "okay";
+};
+
+&phy0 {
+	status = "okay";
+};
+
+&phy1 {
+	status = "okay";
+};
+
+&port0 {
+	phy-handle = <&phy0>;
+	phy-mode = "gmii";
+	phys = <&serdes 0 CU(0)>;
+	status = "okay";
+};
+
+&port1 {
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+	phys = <&serdes 1 CU(1)>;
+	status = "okay";
+};
+
+&port2 {
+	sfp = <&sfp2>;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	phys = <&serdes 2 SERDES6G(0)>;
+	status = "okay";
+};
+
+&port3 {
+	sfp = <&sfp3>;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	phys = <&serdes 3 SERDES6G(1)>;
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>;
+	pinctrl-names = "default";
+	microchip,sgpio-port-ranges = <0 3>, <8 11>;
+	status = "okay";
+
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
+&switch {
+	pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/lan966x.dtsi b/arch/arm/boot/dts/microchip/lan966x.dtsi
new file mode 100644
index 000000000000..05b73f7cf0c7
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/lan966x.dtsi
@@ -0,0 +1,615 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x.dtsi - Device Tree Include file for Microchip LAN966 family SoC
+ *
+ * Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries
+ *
+ * Author: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/microchip,lan966x.h>
+
+/ {
+	model = "Microchip LAN966 family SoC";
+	compatible = "microchip,lan966";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			clock-frequency = <600000000>;
+			reg = <0x0>;
+		};
+	};
+
+	clocks {
+		sys_clk: sys_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <165625000>;
+		};
+
+		cpu_clk: cpu_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <600000000>;
+		};
+
+		ddr_clk: ddr_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <300000000>;
+		};
+
+		nic_clk: nic_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	clks: clock-controller@e00c00a8 {
+		compatible = "microchip,lan966x-gck";
+		#clock-cells = <1>;
+		clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>;
+		clock-names = "cpu", "ddr", "sys";
+		reg = <0xe00c00a8 0x38>, <0xe00c02cc 0x4>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <37500000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		udc: usb@200000 {
+			compatible = "microchip,lan9662-udc",
+				     "atmel,sama5d3-udc";
+			reg = <0x00200000 0x80000>,
+			      <0xe0808000 0x400>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks GCK_GATE_UDPHS>, <&nic_clk>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		switch: switch@e0000000 {
+			compatible = "microchip,lan966x-switch";
+			reg = <0xe0000000 0x0100000>,
+			      <0xe2000000 0x0800000>;
+			reg-names = "cpu", "gcb";
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "xtr", "fdma", "ana", "ptp",
+					  "ptp-ext";
+			resets = <&reset 0>;
+			reset-names = "switch";
+			status = "disabled";
+
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+
+				port5: port@5 {
+					reg = <5>;
+					status = "disabled";
+				};
+
+				port6: port@6 {
+					reg = <6>;
+					status = "disabled";
+				};
+
+				port7: port@7 {
+					reg = <7>;
+					status = "disabled";
+				};
+			};
+		};
+
+		otp: otp@e0021000 {
+			compatible = "microchip,lan9668-otpc", "microchip,lan9662-otpc";
+			reg = <0xe0021000 0x300>;
+		};
+
+		flx0: flexcom@e0040000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0040000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0040000 0x800>;
+			status = "disabled";
+
+			usart0: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi0: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		flx1: flexcom@e0044000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0044000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0044000 0x800>;
+			status = "disabled";
+
+			usart1: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(4)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi1: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(4)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(4)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		trng: rng@e0048000 {
+			compatible = "atmel,at91sam9g45-trng";
+			reg = <0xe0048000 0x100>;
+			clocks = <&nic_clk>;
+		};
+
+		aes: crypto@e004c000 {
+			compatible = "atmel,at91sam9g46-aes";
+			reg = <0xe004c000 0x100>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(13)>;
+			dma-names = "tx", "rx";
+			clocks = <&nic_clk>;
+			clock-names = "aes_clk";
+		};
+
+		flx2: flexcom@e0060000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0060000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0060000 0x800>;
+			status = "disabled";
+
+			usart2: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(6)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi2: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(6)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(6)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		flx3: flexcom@e0064000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0064000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0064000 0x800>;
+			status = "disabled";
+
+			usart3: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(8)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi3: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(8)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(8)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		dma0: dma-controller@e0068000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe0068000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&nic_clk>;
+			clock-names = "dma_clk";
+		};
+
+		sha: crypto@e006c000 {
+			compatible = "atmel,at91sam9g46-sha";
+			reg = <0xe006c000 0xec>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(14)>;
+			dma-names = "tx";
+			clocks = <&nic_clk>;
+			clock-names = "sha_clk";
+		};
+
+		flx4: flexcom@e0070000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0070000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0070000 0x800>;
+			status = "disabled";
+
+			usart4: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(10)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi4: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(10)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(10)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		timer0: timer@e008c000 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0xe008c000 0x400>;
+			clocks = <&nic_clk>;
+			clock-names = "timer";
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog: watchdog@e0090000 {
+			compatible = "snps,dw-wdt";
+			reg = <0xe0090000 0x1000>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&nic_clk>;
+			status = "disabled";
+		};
+
+		cpu_ctrl: syscon@e00c0000 {
+			compatible = "microchip,lan966x-cpu-syscon", "syscon";
+			reg = <0xe00c0000 0x350>;
+		};
+
+		can0: can@e081c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe081c000 0xfc>, <0x00100000 0x4000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&clks GCK_ID_MCAN0>, <&clks GCK_ID_MCAN0>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&clks GCK_ID_MCAN0>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can1: can@e0820000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0820000 0xfc>, <0x00100000 0x8000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&clks GCK_ID_MCAN1>, <&clks GCK_ID_MCAN1>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&clks GCK_ID_MCAN1>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x4000 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		reset: reset-controller@e200400c {
+			compatible = "microchip,lan966x-switch-reset";
+			reg = <0xe200400c 0x4>;
+			reg-names = "gcb";
+			#reset-cells = <1>;
+			cpu-syscon = <&cpu_ctrl>;
+		};
+
+		gpio: pinctrl@e2004064 {
+			compatible = "microchip,lan966x-pinctrl";
+			reg = <0xe2004064 0xb4>,
+			    <0xe2010024 0x138>;
+			resets = <&reset 0>;
+			reset-names = "switch";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 0 78>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+		};
+
+		mdio0: mdio@e2004118 {
+			compatible = "microchip,lan966x-miim";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe2004118 0x24>;
+			clocks = <&sys_clk>;
+			status = "disabled";
+		};
+
+		mdio1: mdio@e200413c {
+			compatible = "microchip,lan966x-miim";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe200413c 0x24>,
+			      <0xe2010020 0x4>;
+			clocks = <&sys_clk>;
+			status = "disabled";
+
+			phy0: ethernet-phy@1 {
+				reg = <1>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			phy1: ethernet-phy@2 {
+				reg = <2>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		sgpio: gpio@e2004190 {
+			compatible = "microchip,sparx5-sgpio";
+			reg = <0xe2004190 0x118>;
+			clocks = <&sys_clk>;
+			resets = <&reset 0>;
+			reset-names = "switch";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sgpio_in: gpio@0 {
+				compatible = "microchip,sparx5-sgpio-bank";
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <3>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+			};
+
+			sgpio_out: gpio@1 {
+				compatible = "microchip,sparx5-sgpio-bank";
+				reg = <1>;
+				gpio-controller;
+				#gpio-cells = <3>;
+			};
+		};
+
+		hwmon: hwmon@e2010180 {
+			compatible = "microchip,lan9668-hwmon";
+			reg = <0xe2010180 0xc>,
+			      <0xe20042a8 0xc>;
+			reg-names = "pvt", "fan";
+			clocks = <&sys_clk>;
+		};
+
+		serdes: serdes@e202c000 {
+			compatible = "microchip,lan966x-serdes";
+			reg = <0xe202c000 0x9c>,
+			      <0xe2004010 0x4>;
+			#phy-cells = <2>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@e8c11000 {
+			compatible = "arm,gic-400", "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			reg = <0xe8c11000 0x1000>,
+			      <0xe8c12000 0x2000>,
+			      <0xe8c14000 0x2000>,
+			      <0xe8c16000 0x2000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/microchip/mpa1600.dts
index 116ce78bea4f..2a97e2c0b894 100644
--- a/arch/arm/boot/dts/mpa1600.dts
+++ b/arch/arm/boot/dts/microchip/mpa1600.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * mpa1600.dts - Device Tree file for Phontech MPA 1600
  *
  *  Copyright (C) 2013 Joachim Eastwood <manabian@gmail.com>
- *
- * Licensed under GPLv2 only
  */
 /dts-v1/;
 #include "at91rm9200.dtsi"
@@ -12,7 +11,7 @@
 	model = "Phontech MPA 1600";
 	compatible = "phontech,mpa1600", "atmel,at91rm9200";
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x4000000>;
 	};
 
@@ -32,6 +31,18 @@
 				status = "okay";
 			};
 
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			macb0: ethernet@fffbc000 {
 				phy-mode = "rmii";
 				status = "okay";
@@ -46,7 +57,7 @@
 			};
 		};
 
-		usb0: ohci@00300000 {
+		usb0: usb@300000 {
 			num-ports = <1>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/microchip/pm9g45.dts
index 3139221737ee..2258e62f5864 100644
--- a/arch/arm/boot/dts/pm9g45.dts
+++ b/arch/arm/boot/dts/microchip/pm9g45.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * pm9g45.dts - Device Tree file for Ronetix pm9g45 board
  *
  *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 /dts-v1/;
 #include "at91sam9g45.dtsi"
@@ -16,7 +15,7 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@70000000 {
 		reg = <0x70000000 0x8000000>;
 	};
 
@@ -52,11 +51,24 @@
 				};
 			};
 
+			tcb0: timer@fff7c000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			mmc0: mmc@fff80000 {
 				pinctrl-0 = <
 					&pinctrl_board_mmc
 					&pinctrl_mmc0_slot0_clk_cmd_dat0
 					&pinctrl_mmc0_slot0_dat1_3>;
+				pinctrl-names = "default";
 				status = "okay";
 				slot@0 {
 					reg = <0>;
@@ -127,12 +139,12 @@
 			};
 		};
 
-		usb0: ohci@00700000 {
+		usb0: usb@700000 {
 			status = "okay";
 			num-ports = <2>;
 		};
 
-		usb1: ehci@00800000 {
+		usb1: usb@800000 {
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
new file mode 100644
index 000000000000..b075865e6a76
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
@@ -0,0 +1,1403 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sam9x60.dtsi - Device Tree Include file for Microchip SAM9X60 SoC
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Microchip SAM9X60 SoC";
+	compatible = "microchip,sam9x60";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x100000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usb0: gadget@500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "microchip,sam9x60-udc";
+			reg = <0x00500000 0x100000
+				0xf803c000 0x400>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			clock-names = "pclk", "hclk";
+			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+		};
+
+		usb1: usb@600000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: usb@700000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "usb_clk", "ehci_clk";
+			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "microchip,sam9x60-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			microchip,sfr = <&sfr>;
+			reg = <0x10000000 0x60000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "microchip,sam9x60-nand-controller";
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		sdmmc0: sdio-host@80000000 {
+			compatible = "microchip,sam9x60-sdhci";
+			reg = <0x80000000 0x300>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
+			assigned-clock-rates = <100000000>;
+			status = "disabled";
+		};
+
+		sdmmc1: sdio-host@90000000 {
+			compatible = "microchip,sam9x60-sdhci";
+			reg = <0x90000000 0x300>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
+			assigned-clock-rates = <100000000>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			flx4: flexcom@f0000000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0000000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0000000 0x800>;
+				status = "disabled";
+
+				uart4: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(8))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(9))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi4: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(8))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(9))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c4: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(8))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(9))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx5: flexcom@f0004000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0004000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0004000 0x800>;
+				status = "disabled";
+
+				uart5: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(10))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi5: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(10))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c5: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(10))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			dma0: dma-controller@f0008000 {
+				compatible = "microchip,sam9x60-dma", "atmel,sama5d4-dma";
+				reg = <0xf0008000 0x1000>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				clock-names = "dma_clk";
+			};
+
+			ssc: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(38))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(39))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			qspi: spi@f0014000 {
+				compatible = "microchip,sam9x60-qspi";
+				reg = <0xf0014000 0x100>, <0x70000000 0x10000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(26))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(27))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_SYSTEM 19>;
+				clock-names = "pclk", "qspick";
+				atmel,pmc = <&pmc>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2s: i2s@f001c000 {
+				compatible = "microchip,sam9x60-i2smcc";
+				reg = <0xf001c000 0x100>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(36))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(37))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			flx11: flexcom@f0020000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0020000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0020000 0x800>;
+				status = "disabled";
+
+				uart11: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(22))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(23))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c11: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(22))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(23))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx12: flexcom@f0024000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0024000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0024000 0x800>;
+				status = "disabled";
+
+				uart12: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(24))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(25))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c12: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(24))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(25))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			pit64b: timer@f0028000 {
+				compatible = "microchip,sam9x60-pit64b";
+				reg = <0xf0028000 0x100>;
+				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
+				clock-names = "pclk", "gclk";
+			};
+
+			sha: crypto@f002c000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xf002c000 0x100>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(34))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				clock-names = "sha_clk";
+			};
+
+			trng: rng@f0030000 {
+				compatible = "microchip,sam9x60-trng";
+				reg = <0xf0030000 0x100>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+			};
+
+			aes: crypto@f0034000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xf0034000 0x100>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(32))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(33))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				clock-names = "aes_clk";
+			};
+
+			tdes: crypto@f0038000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xf0038000 0x100>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(31))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(30))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+				clock-names = "tdes_clk";
+			};
+
+			classd: classd@f003c000 {
+				compatible = "atmel,sama5d2-classd";
+				reg = <0xf003c000 0x100>;
+				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(35))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			can0: can@f8000000 {
+				compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can";
+				reg = <0xf8000000 0x300>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			can1: can@f8004000 {
+				compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can";
+				reg = <0xf8004000 0x300>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			tcb0: timer@f8008000 {
+				compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8008000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k 0>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			tcb1: timer@f800c000 {
+				compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf800c000 0x100>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&clk32k 0>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			flx6: flexcom@f8010000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8010000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8010000 0x800>;
+				status = "disabled";
+
+				uart6: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c6: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx7: flexcom@f8014000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8014000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8014000 0x800>;
+				status = "disabled";
+
+				uart7: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c7: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx8: flexcom@f8018000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8018000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8018000 0x800>;
+				status = "disabled";
+
+				uart8: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c8: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx0: flexcom@f801c000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf801c000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf801c000 0x800>;
+				status = "disabled";
+
+				uart0: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(0))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(1))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi0: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(0))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(1))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c0: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(0))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(1))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx1: flexcom@f8020000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8020000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8020000 0x800>;
+				status = "disabled";
+
+				uart1: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(2))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(3))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi1: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(2))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(3))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c1: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(2))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(3))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx2: flexcom@f8024000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8024000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8024000 0x800>;
+				status = "disabled";
+
+				uart2: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(4))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(5))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi2: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(4))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(5))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c2: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(4))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(5))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx3: flexcom@f8028000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8028000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8028000 0x800>;
+				status = "disabled";
+
+				uart3: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(6))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(7))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi3: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(6))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(7))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c3: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(6))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(7))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			macb0: ethernet@f802c000 {
+				compatible = "cdns,sam9x60-macb", "cdns,macb";
+				reg = <0xf802c000 0x1000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			macb1: ethernet@f8030000 {
+				compatible = "cdns,sam9x60-macb", "cdns,macb";
+				reg = <0xf8030000 0x1000>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			pwm0: pwm@f8034000 {
+				compatible = "microchip,sam9x60-pwm";
+				reg = <0xf8034000 0x300>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			hlcdc: hlcdc@f8038000 {
+				compatible = "microchip,sam9x60-hlcdc";
+				reg = <0xf8038000 0x4000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_GCK 25>, <&clk32k 1>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				assigned-clocks = <&pmc PMC_TYPE_GCK 25>;
+				assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					#pwm-cells = <3>;
+				};
+			};
+
+			flx9: flexcom@f8040000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8040000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8040000 0x800>;
+				status = "disabled";
+
+				uart9: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c9: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx10: flexcom@f8044000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8044000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8044000 0x800>;
+				status = "disabled";
+
+				uart10: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(21))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c10: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(21))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			isi: isi@f8048000 {
+				compatible = "microchip,sam9x60-isi", "atmel,at91sam9g45-isi";
+				reg = <0xf8048000 0x100>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			adc: adc@f804c000 {
+				compatible = "microchip,sam9x60-adc", "atmel,sama5d2-adc";
+				reg = <0xf804c000 0x100>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				clock-names = "adc_clk";
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(40))>;
+				dma-names = "rx";
+				atmel,min-sample-rate-hz = <200000>;
+				atmel,max-sample-rate-hz = <20000000>;
+				atmel,startup-time-ms = <4>;
+				atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			sfr: sfr@f8050000 {
+				compatible = "microchip,sam9x60-sfr", "syscon";
+				reg = <0xf8050000 0x100>;
+			};
+
+			matrix: matrix@ffffde00 {
+				compatible = "microchip,sam9x60-matrix", "atmel,at91sam9x5-matrix", "syscon";
+				reg = <0xffffde00 0x200>;
+			};
+
+			pmecc: ecc-engine@ffffe000 {
+				compatible = "microchip,sam9x60-pmecc", "atmel,at91sam9g45-pmecc";
+				reg = <0xffffe000 0x300>,
+				      <0xffffe600 0x100>;
+			};
+
+			mpddrc: mpddrc@ffffe800 {
+				compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc";
+				reg = <0xffffe800 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			smc: smc@ffffea00 {
+				compatible = "microchip,sam9x60-smc", "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffea00 0x100>;
+			};
+
+			aic: interrupt-controller@fffff100 {
+				compatible = "microchip,sam9x60-aic";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0xfffff100 0x100>;
+				atmel,external-irqs = <31>;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(28))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(29))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pinctrl: pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "microchip,sam9x60-pinctrl", "simple-mfd";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				/* mux-mask corresponding to sam9x60 SoC in TFBGA228L package */
+				atmel,mux-mask = <
+						 /*	A	B	C	*/
+						 0xffffffff 0xffe03fff 0xef00019d	/* pioA */
+						 0x03ffffff 0x02fc7e7f 0x00780000	/* pioB */
+						 0xffffffff 0xffffffff 0xf83fffff	/* pioC */
+						 0x003fffff 0x003f8000 0x00000000	/* pioD */
+						 >;
+
+				pioA: gpio@fffff400 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <26>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <22>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+				};
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "microchip,sam9x60-pmc", "syscon";
+				reg = <0xfffffc00 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+				clock-names = "td_slck", "md_slck", "main_xtal";
+			};
+
+			reset_controller: reset-controller@fffffe00 {
+				compatible = "microchip,sam9x60-rstc";
+				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k 0>;
+			};
+
+			shutdown_controller: poweroff@fffffe10 {
+				compatible = "microchip,sam9x60-shdwc";
+				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,wakeup-rtc-timer;
+				atmel,wakeup-rtt-timer;
+				status = "disabled";
+			};
+
+			rtt: rtc@fffffe20 {
+				compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
+				reg = <0xfffffe20 0x20>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k 1>;
+			};
+
+			pit: timer@fffffe40 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			clk32k: clock-controller@fffffe50 {
+				compatible = "microchip,sam9x60-sckc";
+				reg = <0xfffffe50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <1>;
+			};
+
+			gpbr: syscon@fffffe60 {
+				compatible = "microchip,sam9x60-gpbr", "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffe60 0x10>;
+			};
+
+			rtc: rtc@fffffea8 {
+				compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc";
+				reg = <0xfffffea8 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k 1>;
+			};
+
+			watchdog: watchdog@ffffff80 {
+				compatible = "microchip,sam9x60-wdt";
+				reg = <0xffffff80 0x24>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k 0>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sam9x7.dtsi b/arch/arm/boot/dts/microchip/sam9x7.dtsi
new file mode 100644
index 000000000000..46dacbbd201d
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sam9x7.dtsi
@@ -0,0 +1,1316 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sam9x7.dtsi - Device Tree Include file for Microchip SAM9X7 SoC family
+ *
+ * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Varshini Rajendran <varshini.rajendran@microchip.com>
+ */
+
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Microchip SAM9X7 SoC";
+	compatible = "microchip,sam9x7";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			reg = <0>;
+			device_type = "cpu";
+		};
+	};
+
+	clocks {
+		slow_xtal: clock-slowxtal {
+			compatible = "fixed-clock";
+			clock-output-names = "slow_xtal";
+			#clock-cells = <0>;
+		};
+
+		main_xtal: clock-mainxtal {
+			compatible = "fixed-clock";
+			clock-output-names = "main_xtal";
+			#clock-cells = <0>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x300000 0x10000>;
+		ranges = <0 0x300000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sdmmc0: mmc@80000000 {
+			compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0x80000000 0x300>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
+			assigned-clock-rates = <100000000>;
+			status = "disabled";
+		};
+
+		sdmmc1: mmc@90000000 {
+			compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0x90000000 0x300>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
+			assigned-clock-rates = <100000000>;
+			status = "disabled";
+		};
+	};
+
+	apb {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flx4: flexcom@f0000000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf0000000 0x200>;
+			ranges = <0x0 0xf0000000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+			status = "disabled";
+
+			uart4: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(8))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(9))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi4: spi@400 {
+				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(8))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(9))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(8))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(9))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx5: flexcom@f0004000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf0004000 0x200>;
+			ranges = <0x0 0xf0004000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+			status = "disabled";
+
+			uart5: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(10))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(11))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi5: spi@400 {
+				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "spi_clk";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(10))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(11))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(10))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(11))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		dma0: dma-controller@f0008000 {
+			compatible = "microchip,sam9x7-dma", "atmel,sama5d4-dma";
+			reg = <0xf0008000 0x1000>;
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		ssc: ssc@f0010000 {
+			compatible = "microchip,sam9x7-ssc", "atmel,at91sam9g45-ssc";
+			reg = <0xf0010000 0x4000>;
+			interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+			clock-names = "pclk";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(38))>,
+			       <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(39))>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		qspi: spi@f0014000 {
+			compatible = "microchip,sam9x7-ospi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xf0014000 0x100>, <0x60000000 0x20000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			interrupts = <35 IRQ_TYPE_LEVEL_HIGH 7>;
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				AT91_XDMAC_DT_PERID(26))>,
+				<&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				AT91_XDMAC_DT_PERID(27))>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_GCK 35>;
+			clock-names = "pclk", "gclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 35>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_PLLADIV2>;
+			status = "disabled";
+		};
+
+		i2s: i2s@f001c000 {
+			compatible = "microchip,sam9x7-i2smcc", "microchip,sam9x60-i2smcc";
+			reg = <0xf001c000 0x100>;
+			interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>;
+			clock-names = "pclk", "gclk";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(36))>,
+			       <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(37))>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		flx11: flexcom@f0020000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf0020000 0x200>;
+			ranges = <0x0 0xf0020000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+			status = "disabled";
+
+			uart11: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(22))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(23))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(22))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(23))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx12: flexcom@f0024000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf0024000 0x200>;
+			ranges = <0x0 0xf0024000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+			status = "disabled";
+
+			uart12: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(24))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(25))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(24))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(25))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		pit64b0: timer@f0028000 {
+			compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xf0028000 0x100>;
+			interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
+			clock-names = "pclk", "gclk";
+		};
+
+		sha: crypto@f002c000 {
+			compatible = "microchip,sam9x7-sha", "atmel,at91sam9g46-sha";
+			reg = <0xf002c000 0x100>;
+			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+			clock-names = "sha_clk";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(34))>;
+			dma-names = "tx";
+		};
+
+		trng: rng@f0030000 {
+			compatible = "microchip,sam9x7-trng", "microchip,sam9x60-trng";
+			reg = <0xf0030000 0x100>;
+			interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+			status = "disabled";
+		};
+
+		aes: crypto@f0034000 {
+			compatible = "microchip,sam9x7-aes", "atmel,at91sam9g46-aes";
+			reg = <0xf0034000 0x100>;
+			interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+			clock-names = "aes_clk";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(32))>,
+			       <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(33))>;
+			dma-names = "tx", "rx";
+		};
+
+		tdes: crypto@f0038000 {
+			compatible = "microchip,sam9x7-tdes", "atmel,at91sam9g46-tdes";
+			reg = <0xf0038000 0x100>;
+			interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+			clock-names = "tdes_clk";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(31))>,
+			       <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(30))>;
+			dma-names = "tx", "rx";
+		};
+
+		classd: sound@f003c000 {
+			compatible = "microchip,sam9x7-classd", "atmel,sama5d2-classd";
+			reg = <0xf003c000 0x100>;
+			interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>;
+			clock-names = "pclk", "gclk";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(35))>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
+		pit64b1: timer@f0040000 {
+			compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xf0040000 0x100>;
+			interrupts = <58 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
+			clock-names = "pclk", "gclk";
+		};
+
+		can0: can@f8000000 {
+			compatible = "bosch,m_can";
+			reg = <0xf8000000 0x100>, <0x300000 0x7800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <68 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_GCK 29>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 29>;
+			assigned-clock-rates = <480000000>, <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can1: can@f8004000 {
+			compatible = "bosch,m_can";
+			reg = <0xf8004000 0x100>, <0x300000 0xbc00>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <69 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 30>, <&pmc PMC_TYPE_GCK 30>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 30>;
+			assigned-clock-rates = <480000000>, <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		tcb: timer@f8008000 {
+			compatible = "microchip,sam9x7-tcb","atmel,sama5d2-tcb", "simple-mfd", "syscon";
+			reg = <0xf8008000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_GCK 17>, <&clk32k 0>;
+			clock-names = "t0_clk", "gclk", "slow_clk";
+		};
+
+		flx6: flexcom@f8010000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8010000 0x200>;
+			ranges = <0x0 0xf8010000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+			status = "disabled";
+
+			uart6: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(12))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(13))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(12))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(13))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx7: flexcom@f8014000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8014000 0x200>;
+			ranges = <0x0 0xf8014000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+			status = "disabled";
+
+			uart7: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(14))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(15))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(14))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(15))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx8: flexcom@f8018000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8018000 0x200>;
+			ranges = <0x0 0xf8018000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+			status = "disabled";
+
+			uart8: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(16))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(17))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c8: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(16))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(17))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx0: flexcom@f801c000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf801c000 0x200>;
+			ranges = <0x0 0xf801c000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+			status = "disabled";
+
+			uart0: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(0))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi0: spi@400 {
+				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				clock-names = "spi_clk";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(0))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(0))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx1: flexcom@f8020000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8020000 0x200>;
+			ranges = <0x0 0xf8020000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+			status = "disabled";
+
+			uart1: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(2))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi1: spi@400 {
+				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "spi_clk";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(2))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(2))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx2: flexcom@f8024000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8024000 0x200>;
+			ranges = <0x0 0xf8024000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+			status = "disabled";
+
+			uart2: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(4))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(5))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi2: spi@400 {
+				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "spi_clk";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(4))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(5))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(4))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(5))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx3: flexcom@f8028000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8028000 0x200>;
+			ranges = <0x0 0xf8028000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+			status = "disabled";
+
+			uart3: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(6))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi3: spi@400 {
+				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "spi_clk";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(6))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(6))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		gmac: ethernet@f802c000 {
+			compatible = "microchip,sam9x7-gem", "microchip,sama7g5-gem";
+			reg = <0xf802c000 0x1000>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 0 */
+				     <60 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 1 */
+				     <61 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 2 */
+				     <62 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 3 */
+				     <63 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 4 */
+				     <64 IRQ_TYPE_LEVEL_HIGH 3>;	/* Queue 5 */
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_GCK 24>, <&pmc PMC_TYPE_GCK 67>;
+			clock-names = "hclk", "pclk", "tx_clk", "tsu_clk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 67>;
+			assigned-clock-rates = <266666666>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@f8034000 {
+			compatible = "microchip,sam9x7-pwm", "microchip,sam9x60-pwm";
+			reg = <0xf8034000 0x300>;
+			interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		hlcdc: hlcdc@f8038000 {
+			compatible = "microchip,sam9x75-xlcdc";
+			reg = <0xf8038000 0x4000>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_GCK 25>, <&clk32k 1>;
+			clock-names = "periph_clk", "sys_clk", "slow_clk";
+			status = "disabled";
+
+			display-controller {
+				compatible = "atmel,hlcdc-display-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			pwm {
+				compatible = "atmel,hlcdc-pwm";
+				#pwm-cells = <3>;
+			};
+		};
+
+		flx9: flexcom@f8040000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8040000 0x200>;
+			ranges = <0x0 0xf8040000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+			status = "disabled";
+
+			uart9: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(18))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(19))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(18))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(19))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx10: flexcom@f8044000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8044000 0x200>;
+			ranges = <0x0 0xf8044000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+			status = "disabled";
+
+			uart10: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(20))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(21))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(20))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(21))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		lvds_controller: lvds-controller@f8060000 {
+			compatible = "microchip,sam9x75-lvds";
+			reg = <0xf8060000 0x100>;
+			interrupts = <56 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
+			clock-names = "pclk";
+			status = "disabled";
+		};
+
+		matrix: matrix@ffffde00 {
+			compatible = "microchip,sam9x7-matrix", "atmel,at91sam9x5-matrix", "syscon";
+			reg = <0xffffde00 0x200>;
+		};
+
+		pmecc: ecc-engine@ffffe000 {
+			compatible = "microchip,sam9x7-pmecc", "atmel,at91sam9g45-pmecc";
+			reg = <0xffffe000 0x300>, <0xffffe600 0x100>;
+		};
+
+		mpddrc: mpddrc@ffffe800 {
+			compatible = "microchip,sam9x7-ddramc", "atmel,sama5d3-ddramc";
+			reg = <0xffffe800 0x200>;
+			clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>;
+			clock-names = "ddrck", "mpddr";
+		};
+
+		smc: smc@ffffea00 {
+			compatible = "microchip,sam9x7-smc", "atmel,at91sam9260-smc", "syscon";
+			reg = <0xffffea00 0x100>;
+		};
+
+		aic: interrupt-controller@fffff100 {
+			compatible = "microchip,sam9x7-aic";
+			reg = <0xfffff100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			atmel,external-irqs = <31>;
+		};
+
+		dbgu: serial@fffff200 {
+			compatible = "microchip,sam9x7-dbgu", "atmel,at91sam9260-dbgu", "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+			reg = <0xfffff200 0x200>;
+			interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+			clock-names = "usart";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(28))>,
+			       <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(29))>;
+			dma-names = "tx", "rx";
+			atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@fffff400 {
+			compatible = "microchip,sam9x7-pinctrl", "microchip,sam9x60-pinctrl", "simple-mfd";
+			ranges = <0xfffff400 0xfffff400 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/* mux-mask corresponding to sam9x7 SoC in TFBGA228L package */
+			atmel,mux-mask = <
+					 /*  A		B	   C	      D	  */
+					 0xffffffff 0xffffefc0 0xc0ffd000 0x00000000	/* pioA */
+					 0x07ffffff 0x0805fe7f 0x01ff9f81 0x06078000	/* pioB */
+					 0xffffffff 0x07dfffff 0xfa3fffff 0x00000000	/* pioC */
+					 0x00003fff 0x00003fe0 0x0000003f 0x00000000	/* pioD */
+					 >;
+
+			pioA: gpio@fffff400 {
+				compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x200>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#gpio-cells = <2>;
+				gpio-controller;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+			};
+
+			pioB: gpio@fffff600 {
+				compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x200>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#gpio-cells = <2>;
+				gpio-controller;
+				#gpio-lines = <26>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+			};
+
+			pioC: gpio@fffff800 {
+				compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff800 0x200>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#gpio-cells = <2>;
+				gpio-controller;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+			};
+
+			pioD: gpio@fffffa00 {
+				compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffffa00 0x200>;
+				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#gpio-cells = <2>;
+				gpio-controller;
+				#gpio-lines = <22>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+			};
+		};
+
+		pmc: clock-controller@fffffc00 {
+			compatible = "microchip,sam9x7-pmc", "syscon";
+			reg = <0xfffffc00 0x200>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+			#clock-cells = <2>;
+			clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+			clock-names = "td_slck", "md_slck", "main_xtal";
+		};
+
+		reset_controller: reset-controller@fffffe00 {
+			compatible = "microchip,sam9x7-rstc", "microchip,sam9x60-rstc";
+			reg = <0xfffffe00 0x10>;
+			clocks = <&clk32k 0>;
+		};
+
+		poweroff: poweroff@fffffe10 {
+			compatible = "microchip,sam9x7-shdwc", "microchip,sam9x60-shdwc";
+			reg = <0xfffffe10 0x10>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clk32k 0>;
+			atmel,wakeup-rtc-timer;
+			atmel,wakeup-rtt-timer;
+			status = "disabled";
+		};
+
+		rtt: rtc@fffffe20 {
+			compatible = "microchip,sam9x7-rtt", "atmel,at91sam9260-rtt";
+			reg = <0xfffffe20 0x20>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&clk32k 0>;
+		};
+
+		clk32k: clock-controller@fffffe50 {
+			compatible = "microchip,sam9x7-sckc", "microchip,sam9x60-sckc";
+			reg = <0xfffffe50 0x4>;
+			clocks = <&slow_xtal>;
+			#clock-cells = <1>;
+		};
+
+		gpbr: syscon@fffffe60 {
+			compatible = "microchip,sam9x7-gpbr", "atmel,at91sam9260-gpbr", "syscon";
+			reg = <0xfffffe60 0x10>;
+		};
+
+		rtc: rtc@fffffea8 {
+			compatible = "microchip,sam9x7-rtc", "microchip,sam9x60-rtc";
+			reg = <0xfffffea8 0x100>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&clk32k 0>;
+		};
+
+		watchdog: watchdog@ffffff80 {
+			compatible = "microchip,sam9x7-wdt", "microchip,sam9x60-wdt";
+			reg = <0xffffff80 0x24>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d2-pinfunc.h b/arch/arm/boot/dts/microchip/sama5d2-pinfunc.h
index 8a394f336003..28a2e45752fe 100644
--- a/arch/arm/boot/dts/sama5d2-pinfunc.h
+++ b/arch/arm/boot/dts/microchip/sama5d2-pinfunc.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #define PINMUX_PIN(no, func, ioset) \
 (((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20))
 
@@ -374,7 +375,7 @@
 #define PIN_PB22__GPIO			PINMUX_PIN(PIN_PB22, 0, 0)
 #define PIN_PB22__LCDDAT11		PINMUX_PIN(PIN_PB22, 1, 1)
 #define PIN_PB22__A11			PINMUX_PIN(PIN_PB22, 2, 1)
-#define PIN_PB22__TDO			PINMUX_PIN(PIN_PB22, 3, 1)
+#define PIN_PB22__TD0			PINMUX_PIN(PIN_PB22, 3, 1)
 #define PIN_PB22__TIOA2			PINMUX_PIN(PIN_PB22, 4, 2)
 #define PIN_PB22__FLEXCOM3_IO1		PINMUX_PIN(PIN_PB22, 5, 3)
 #define PIN_PB22__GMDC			PINMUX_PIN(PIN_PB22, 6, 3)
@@ -517,7 +518,7 @@
 #define PIN_PC9__GPIO			PINMUX_PIN(PIN_PC9, 0, 0)
 #define PIN_PC9__FIQ			PINMUX_PIN(PIN_PC9, 1, 3)
 #define PIN_PC9__GTSUCOMP		PINMUX_PIN(PIN_PC9, 2, 1)
-#define PIN_PC9__ISC_D0			PINMUX_PIN(PIN_PC9, 2, 1)
+#define PIN_PC9__ISC_D0			PINMUX_PIN(PIN_PC9, 3, 1)
 #define PIN_PC9__TIOA4			PINMUX_PIN(PIN_PC9, 4, 2)
 #define PIN_PC10			74
 #define PIN_PC10__GPIO			PINMUX_PIN(PIN_PC10, 0, 0)
@@ -555,7 +556,7 @@
 #define PIN_PC14__LCDDAT6		PINMUX_PIN(PIN_PC14, 1, 2)
 #define PIN_PC14__GRX0			PINMUX_PIN(PIN_PC14, 2, 1)
 #define PIN_PC14__ISC_D5		PINMUX_PIN(PIN_PC14, 3, 1)
-#define PIN_PC14__TDO			PINMUX_PIN(PIN_PC14, 5, 2)
+#define PIN_PC14__TD0			PINMUX_PIN(PIN_PC14, 5, 2)
 #define PIN_PC14__A3			PINMUX_PIN(PIN_PC14, 6, 2)
 #define PIN_PC15			79
 #define PIN_PC15__GPIO			PINMUX_PIN(PIN_PC15, 0, 0)
diff --git a/arch/arm/boot/dts/microchip/sama5d2.dtsi b/arch/arm/boot/dts/microchip/sama5d2.dtsi
new file mode 100644
index 000000000000..fde890f18d20
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d2.dtsi
@@ -0,0 +1,1169 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d2.dtsi - Device Tree Include file for SAMA5D2 family SoC
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel SAMA5D2 family SoC";
+	compatible = "atmel,sama5d2";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0>;
+			d-cache-size = <0x8000>;	// L1, 32 KB
+			i-cache-size = <0x8000>;	// L1, 32 KB
+			next-level-cache = <&L2>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	etb@740000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0x740000 0x1000>;
+
+		clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+		clock-names = "apb_pclk";
+
+		in-ports {
+			port {
+				etb_in: endpoint {
+					remote-endpoint = <&etm_out>;
+				};
+			};
+		};
+	};
+
+	etm@73c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0x73c000 0x1000>;
+
+		clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+		clock-names = "apb_pclk";
+
+		out-ports {
+			port {
+				etm_out: endpoint {
+					remote-endpoint = <&etb_in>;
+				};
+			};
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	ns_sram: sram@200000 {
+		compatible = "mmio-sram";
+		reg = <0x00200000 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00200000 0x20000>;
+	};
+
+	resistive_touch: resistive-touch {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
+			      <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
+			      <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
+		io-channel-names = "x", "y", "pressure";
+		touchscreen-min-pressure = <50000>;
+		status = "disabled";
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		nfc_sram: sram@100000 {
+			compatible = "mmio-sram";
+			no-memory-wc;
+			reg = <0x00100000 0x2400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x00100000 0x2400>;
+
+		};
+
+		usb0: gadget@300000 {
+			compatible = "atmel,sama5d3-udc";
+			reg = <0x00300000 0x100000
+			       0xfc02c000 0x400>;
+			interrupts = <42 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		usb1: usb@400000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00400000 0x100000>;
+			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: usb@500000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 41>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		L2: cache-controller@a00000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a00000 0x1000>;
+			interrupts = <63 IRQ_TYPE_LEVEL_HIGH 4>;
+			cache-unified;
+			cache-level = <2>;
+			cache-size = <0x20000>;		// L2, 128 KB
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,sama5d3-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&hsmc>;
+			reg = <0x10000000 0x10000000
+			       0x60000000 0x30000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x60000000 0x10000000
+				  0x2 0x0 0x70000000 0x10000000
+				  0x3 0x0 0x80000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,sama5d3-nand-controller";
+				atmel,nfc-sram = <&nfc_sram>;
+				atmel,nfc-io = <&nfc_io>;
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			compatible = "atmel,sama5d2-sdhci";
+			reg = <0xa0000000 0x300>;
+			interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 31>, <&pmc PMC_TYPE_GCK 31>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
+			clock-names = "hclock", "multclk", "baseclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 31>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+		};
+
+		sdmmc1: sdio-host@b0000000 {
+			compatible = "atmel,sama5d2-sdhci";
+			reg = <0xb0000000 0x300>;
+			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_GCK 32>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
+			clock-names = "hclock", "multclk", "baseclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 32>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+		};
+
+		nfc_io: nfc-io@c0000000 {
+			compatible = "atmel,sama5d3-nfc-io", "syscon";
+			reg = <0xc0000000 0x8000000>;
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			hlcdc: hlcdc@f0000000 {
+				compatible = "atmel,sama5d2-hlcdc";
+				reg = <0xf0000000 0x2000>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					#pwm-cells = <3>;
+				};
+			};
+
+			isc: isc@f0008000 {
+				compatible = "atmel,sama5d2-isc";
+				reg = <0xf0008000 0x4000>;
+				interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 18>, <&pmc PMC_TYPE_GCK 46>;
+				clock-names = "hclock", "iscck", "gck";
+				#clock-cells = <0>;
+				clock-output-names = "isc-mck";
+				status = "disabled";
+			};
+
+			ramc0: ramc@f000c000 {
+				compatible = "atmel,sama5d3-ddramc";
+				reg = <0xf000c000 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			dma0: dma-controller@f0010000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0010000 0x1000>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "dma_clk";
+			};
+
+			/* Place dma1 here despite its address */
+			dma1: dma-controller@f0004000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0004000 0x1000>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "dma_clk";
+			};
+
+			pmc: clock-controller@f0014000 {
+				compatible = "atmel,sama5d2-pmc", "syscon";
+				reg = <0xf0014000 0x160>;
+				interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			qspi0: spi@f0020000 {
+				compatible = "atmel,sama5d2-qspi";
+				reg = <0xf0020000 0x100>, <0xd0000000 0x08000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
+				clock-names = "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			qspi1: spi@f0024000 {
+				compatible = "atmel,sama5d2-qspi";
+				reg = <0xf0024000 0x100>, <0xd8000000 0x08000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				interrupts = <53 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 53>;
+				clock-names = "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			sha: crypto@f0028000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xf0028000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(30))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "sha_clk";
+			};
+
+			aes: crypto@f002c000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xf002c000 0x100>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(26))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(27))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "aes_clk";
+			};
+
+			spi0: spi@f8000000 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf8000000 0x100>;
+				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(6))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <16>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssc0: ssc@f8004000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf8004000 0x4000>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					AT91_XDMAC_DT_PERID(21))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					AT91_XDMAC_DT_PERID(22))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			macb0: ethernet@f8008000 {
+				compatible = "atmel,sama5d2-gem";
+				reg = <0xf8008000 0x1000>;
+				interrupts = <5  IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 0 */
+					     <66 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 1 */
+					     <67 IRQ_TYPE_LEVEL_HIGH 3>;        /* Queue 2 */
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			tcb0: timer@f800c000 {
+				compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf800c000 0x100>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_GCK 35>, <&clk32k>;
+				clock-names = "t0_clk", "gclk", "slow_clk";
+			};
+
+			tcb1: timer@f8010000 {
+				compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8010000 0x100>;
+				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&pmc PMC_TYPE_GCK 36>, <&clk32k>;
+				clock-names = "t0_clk", "gclk", "slow_clk";
+			};
+
+			hsmc: hsmc@f8014000 {
+				compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
+				reg = <0xf8014000 0x1000>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				pmecc: ecc-engine@f8014070 {
+					compatible = "atmel,sama5d2-pmecc";
+					reg = <0xf8014070 0x490>,
+					      <0xf8014500 0x200>;
+				};
+			};
+
+			pdmic: pdmic@f8018000 {
+				compatible = "atmel,sama5d2-pdmic";
+				reg = <0xf8018000 0x124>;
+				interrupts = <48 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(50))>;
+				dma-names = "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 48>, <&pmc PMC_TYPE_GCK 48>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			uart0: serial@f801c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf801c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(35))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(36))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(37))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(38))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart2: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(39))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(40))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8028000 {
+				compatible = "atmel,sama5d2-i2c";
+				reg = <0xf8028000 0x100>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(0))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			pwm0: pwm@f802c000 {
+				compatible = "atmel,sama5d2-pwm";
+				reg = <0xf802c000 0x4000>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				status = "disabled";
+			};
+
+			sfr: sfr@f8030000 {
+				compatible = "atmel,sama5d2-sfr", "syscon";
+				reg = <0xf8030000 0x98>;
+			};
+
+			flx0: flexcom@f8034000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8034000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8034000 0x800>;
+				status = "disabled";
+
+				uart5: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi2: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				i2c2: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx1: flexcom@f8038000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8038000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8038000 0x800>;
+				status = "disabled";
+
+				uart6: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi3: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				i2c3: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			securam: sram@f8044000 {
+				compatible = "atmel,sama5d2-securam", "mmio-sram";
+				reg = <0xf8044000 0x1420>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 51>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				no-memory-wc;
+				ranges = <0 0xf8044000 0x1420>;
+			};
+
+			reset_controller: reset-controller@f8048000 {
+				compatible = "atmel,sama5d3-rstc";
+				reg = <0xf8048000 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shutdown_controller: poweroff@f8048010 {
+				compatible = "atmel,sama5d2-shdwc";
+				reg = <0xf8048010 0x10>;
+				clocks = <&clk32k>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,wakeup-rtc-timer;
+			};
+
+			pit: timer@f8048030 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xf8048030 0x10>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
+			};
+
+			watchdog: watchdog@f8048040 {
+				compatible = "atmel,sama5d4-wdt";
+				reg = <0xf8048040 0x10>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			clk32k: clock-controller@f8048050 {
+				compatible = "atmel,sama5d4-sckc";
+				reg = <0xf8048050 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
+			};
+
+			rtc: rtc@f80480b0 {
+				compatible = "atmel,sama5d2-rtc";
+				reg = <0xf80480b0 0x30>;
+				interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+			};
+
+			i2s0: i2s@f8050000 {
+				compatible = "atmel,sama5d2-i2s";
+				reg = <0xf8050000 0x100>;
+				interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(31))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(32))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 54>, <&pmc PMC_TYPE_GCK 54>;
+				clock-names = "pclk", "gclk";
+				assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S0_MUX>;
+				assigned-clock-parents = <&pmc PMC_TYPE_GCK 54>;
+				status = "disabled";
+			};
+
+			can0: can@f8054000 {
+				compatible = "bosch,m_can";
+				reg = <0xf8054000 0x4000>, <0x210000 0x1c00>;
+				reg-names = "m_can", "message_ram";
+				interrupts = <56 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <64 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-names = "int0", "int1";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 56>, <&pmc PMC_TYPE_GCK 56>;
+				clock-names = "hclk", "cclk";
+				assigned-clocks = <&pmc PMC_TYPE_GCK 56>;
+				assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+				assigned-clock-rates = <40000000>;
+				bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+				status = "disabled";
+			};
+
+			spi1: spi@fc000000 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfc000000 0x100>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(8))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(9))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <16>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart3: serial@fc008000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc008000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(41))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(42))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart4: serial@fc00c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc00c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(43))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(44))>;
+				dma-names = "tx", "rx";
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			flx2: flexcom@fc010000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xfc010000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xfc010000 0x800>;
+				status = "disabled";
+
+				uart7: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi4: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				i2c4: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx3: flexcom@fc014000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xfc014000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xfc014000 0x800>;
+				status = "disabled";
+
+				uart8: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi5: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				i2c5: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+			};
+
+			flx4: flexcom@fc018000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xfc018000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xfc018000 0x800>;
+				status = "disabled";
+
+				uart9: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi6: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				i2c6: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			trng: rng@fc01c000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xfc01c000 0x100>;
+				interrupts = <47 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+			};
+
+			aic: interrupt-controller@fc020000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,sama5d2-aic";
+				interrupt-controller;
+				reg = <0xfc020000 0x200>;
+				atmel,external-irqs = <49>;
+			};
+
+			i2c1: i2c@fc028000 {
+				compatible = "atmel,sama5d2-i2c";
+				reg = <0xfc028000 0x100>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(2))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			adc: adc@fc030000 {
+				compatible = "atmel,sama5d2-adc";
+				reg = <0xfc030000 0x100>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+				clock-names = "adc_clk";
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
+				dma-names = "rx";
+				atmel,min-sample-rate-hz = <200000>;
+				atmel,max-sample-rate-hz = <20000000>;
+				atmel,startup-time-ms = <4>;
+				atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			pioA: pinctrl@fc038000 {
+				compatible = "atmel,sama5d2-pinctrl";
+				reg = <0xfc038000 0x600>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <68 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <69 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <70 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+			};
+
+			pioBU: secumod@fc040000 {
+				compatible = "atmel,sama5d2-secumod", "syscon";
+				reg = <0xfc040000 0x100>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			tdes: crypto@fc044000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xfc044000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(28))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(29))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				clock-names = "tdes_clk";
+			};
+
+			classd: classd@fc048000 {
+				compatible = "atmel,sama5d2-classd";
+				reg = <0xfc048000 0x100>;
+				interrupts = <59 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(47))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 59>, <&pmc PMC_TYPE_GCK 59>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			i2s1: i2s@fc04c000 {
+				compatible = "atmel,sama5d2-i2s";
+				reg = <0xfc04c000 0x100>;
+				interrupts = <55 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(33))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(34))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_GCK 55>;
+				clock-names = "pclk", "gclk";
+				assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S1_MUX>;
+				assigned-clock-parents = <&pmc PMC_TYPE_GCK 55>;
+				status = "disabled";
+			};
+
+			can1: can@fc050000 {
+				compatible = "bosch,m_can";
+				reg = <0xfc050000 0x4000>, <0x210000 0x3800>;
+				reg-names = "m_can", "message_ram";
+				interrupts = <57 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <65 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-names = "int0", "int1";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
+				clock-names = "hclk", "cclk";
+				assigned-clocks = <&pmc PMC_TYPE_GCK 57>;
+				assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+				assigned-clock-rates = <40000000>;
+				bosch,mram-cfg = <0x1c00 0 0 64 0 0 32 32>;
+				status = "disabled";
+			};
+
+			sfrbu: sfr@fc05c000 {
+				compatible = "atmel,sama5d2-sfrbu", "syscon";
+				reg = <0xfc05c000 0x20>;
+			};
+
+			chipid@fc069000 {
+				compatible = "atmel,sama5d2-chipid";
+				reg = <0xfc069000 0x8>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d29.dtsi b/arch/arm/boot/dts/microchip/sama5d29.dtsi
new file mode 100644
index 000000000000..17991c28a256
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d29.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d29.dtsi - Device Tree Include file for SAMA5D29 SoC of the SAMA5D2
+ * family.
+ *
+ *  Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries
+ *
+ *  Author: Hari Prasath <Hari.PrasathGE@microchip.com>
+ *
+ */
+
+#include "sama5d2.dtsi"
+
+&macb0 {
+	compatible = "atmel,sama5d29-gem";
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d3.dtsi b/arch/arm/boot/dts/microchip/sama5d3.dtsi
new file mode 100644
index 000000000000..00ba59ac1968
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d3.dtsi
@@ -0,0 +1,1128 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC
+ *                applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel SAMA5D3 family SoC";
+	compatible = "atmel,sama5d3", "atmel,sama5";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		serial5 = &uart0;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		pwm0 = &pwm0;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0x0>;
+			d-cache-size = <0x8000>;	// L1, 32 KB
+			i-cache-size = <0x8000>;	// L1, 32 KB
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x20000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			mmc0: mmc@f0000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf0000000 0x600>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+				clock-names = "mci_clk";
+			};
+
+			spi0: spi@f0004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0004000 0x100>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(1)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(2)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			ssc0: ssc@f0008000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0008000 0x4000>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(14)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			tcb0: timer@f0010000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf0010000 0x100>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			i2c0: i2c@f0014000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf0014000 0x4000>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(8)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f0018000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf0018000 0x4000>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(10)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioC 26 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioC 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				status = "disabled";
+			};
+
+			usart0: serial@f001c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf001c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@f0020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf0020000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>,
+				       <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart0: serial@f0024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf0024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pwm0: pwm@f002c000 {
+				compatible = "atmel,sama5d3-pwm";
+				reg = <0xf002c000 0x300>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				status = "disabled";
+			};
+
+			isi: isi@f0034000 {
+				compatible = "atmel,at91sam9g45-isi";
+				reg = <0xf0034000 0x4000>;
+				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			sfr: sfr@f0038000 {
+				compatible = "atmel,sama5d3-sfr", "syscon";
+				reg = <0xf0038000 0x60>;
+			};
+
+			mmc1: mmc@f8000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf8000000 0x600>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+				clock-names = "mci_clk";
+			};
+
+			spi1: spi@f8008000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf8008000 0x100>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(15)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(16)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@f800c000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf800c000 0x4000>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(4)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			adc0: adc@f8018000 {
+				compatible = "atmel,sama5d3-adc";
+				reg = <0xf8018000 0x100>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_ad6
+					&pinctrl_adc0_ad7
+					&pinctrl_adc0_ad8
+					&pinctrl_adc0_ad9
+					&pinctrl_adc0_ad10
+					&pinctrl_adc0_ad11
+					>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>,
+					 <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-channels-used = <0xfff>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-use-external-triggers;
+				atmel,adc-vref = <3000>;
+				atmel,adc-sample-hold-time = <11>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@f801c000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf801c000 0x4000>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(12)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c2>;
+				pinctrl-1 = <&pinctrl_i2c2_gpio>;
+				sda-gpios = <&pioA 18 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				status = "disabled";
+			};
+
+			usart2: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>,
+				       <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>,
+				       <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			sha: crypto@f8034000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xf8034000 0x100>;
+				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+				clock-names = "sha_clk";
+			};
+
+			aes: crypto@f8038000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xf8038000 0x100>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(19)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				clock-names = "aes_clk";
+			};
+
+			tdes: crypto@f803c000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xf803c000 0x100>;
+				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(21)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+				clock-names = "tdes_clk";
+			};
+
+			trng: rng@f8040000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xf8040000 0x100>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
+			};
+
+			hsmc: hsmc@ffffc000 {
+				compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
+				reg = <0xffffc000 0x1000>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				pmecc: ecc-engine@ffffc070 {
+					compatible = "atmel,at91sam9g45-pmecc";
+					reg = <0xffffc070 0x490>,
+					      <0xffffc500 0x100>;
+				};
+			};
+
+			dma0: dma-controller@ffffe600 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffe600 0x200>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+				clock-names = "dma_clk";
+			};
+
+			dma1: dma-controller@ffffe800 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffe800 0x200>;
+				interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 31>;
+				clock-names = "dma_clk";
+			};
+
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,sama5d3-ddramc";
+				reg = <0xffffea00 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			dbgu: serial@ffffee00 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xffffee00 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,sama5d3-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <47>;
+			};
+
+			pinctrl: pinctrl@fffff200 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,sama5d3-pinctrl", "simple-mfd";
+				ranges = <0xfffff200 0xfffff200 0xa00>;
+				atmel,mux-mask = <
+					/*   A          B          C  */
+					0xffffffff 0xc0fc0000 0xc0ff0000	/* pioA */
+					0xffffffff 0x0ff8ffff 0x00000000	/* pioB */
+					0xffffffff 0xbc00f1ff 0x7c00fc00	/* pioC */
+					0xffffffff 0xc001c0e0 0x0001c1e0	/* pioD */
+					0xffffffff 0xbf9f8000 0x18000000	/* pioE */
+					>;
+
+				/* shared pinctrl settings */
+				adc0 {
+					pinctrl_adc0_adtrg: adc0_adtrg {
+						atmel,pins =
+							<AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD19 periph A ADTRG */
+					};
+					pinctrl_adc0_ad0: adc0_ad0 {
+						atmel,pins =
+							<AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD20 periph A AD0 */
+					};
+					pinctrl_adc0_ad1: adc0_ad1 {
+						atmel,pins =
+							<AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD21 periph A AD1 */
+					};
+					pinctrl_adc0_ad2: adc0_ad2 {
+						atmel,pins =
+							<AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD22 periph A AD2 */
+					};
+					pinctrl_adc0_ad3: adc0_ad3 {
+						atmel,pins =
+							<AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD23 periph A AD3 */
+					};
+					pinctrl_adc0_ad4: adc0_ad4 {
+						atmel,pins =
+							<AT91_PIOD 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD24 periph A AD4 */
+					};
+					pinctrl_adc0_ad5: adc0_ad5 {
+						atmel,pins =
+							<AT91_PIOD 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD25 periph A AD5 */
+					};
+					pinctrl_adc0_ad6: adc0_ad6 {
+						atmel,pins =
+							<AT91_PIOD 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD26 periph A AD6 */
+					};
+					pinctrl_adc0_ad7: adc0_ad7 {
+						atmel,pins =
+							<AT91_PIOD 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD27 periph A AD7 */
+					};
+					pinctrl_adc0_ad8: adc0_ad8 {
+						atmel,pins =
+							<AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD28 periph A AD8 */
+					};
+					pinctrl_adc0_ad9: adc0_ad9 {
+						atmel,pins =
+							<AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD29 periph A AD9 */
+					};
+					pinctrl_adc0_ad10: adc0_ad10 {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD30 periph A AD10, conflicts with PCK0 */
+					};
+					pinctrl_adc0_ad11: adc0_ad11 {
+						atmel,pins =
+							<AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD31 periph A AD11, conflicts with PCK1 */
+					};
+				};
+
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ebi {
+					pinctrl_ebi_addr: ebi-addr-0 {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nand_addr: ebi-addr-1 {
+						atmel,pins =
+							<AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs0: ebi-cs0-0 {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs1: ebi-cs1-0 {
+						atmel,pins =
+							<AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs2: ebi-cs2-0 {
+						atmel,pins =
+							<AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nwait: ebi-nwait-0 {
+						atmel,pins =
+							<AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nwr1_nbs1: ebi-nwr1-nbs1-0 {
+						atmel,pins =
+							<AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */
+					};
+
+					pinctrl_i2c0_gpio: i2c0-gpio {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */
+							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */
+					};
+
+					pinctrl_i2c1_gpio: i2c1-gpio {
+						atmel,pins =
+							<AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOC 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2: i2c2-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */
+							 AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */
+					};
+
+					pinctrl_i2c2_gpio: i2c2-gpio {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOA 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				isi {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
+						atmel,pins =
+							<AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA16 periph C ISI_D0, conflicts with LCDDAT16 */
+							 AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA17 periph C ISI_D1, conflicts with LCDDAT17 */
+							 AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */
+							 AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */
+							 AT91_PIOA 20 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */
+							 AT91_PIOA 21 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */
+							 AT91_PIOA 22 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */
+							 AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */
+							 AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC30 periph C ISI_PCK, conflicts with UTXD0 */
+							 AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */
+							 AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
+					};
+
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
+							 AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */
+					};
+
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC27 periph C ISI_PD10, conflicts with SPI1_NPCS2, TWCK1 */
+							 AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC26 periph C ISI_PD11, conflicts with SPI1_NPCS1, TWD1 */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD9 periph A MCI0_CK */
+							 AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD0 periph A MCI0_CDA with pullup */
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD1 periph A MCI0_DA0 with pullup */
+					};
+					pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
+						atmel,pins =
+							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD2 periph A MCI0_DA1 with pullup */
+							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD3 periph A MCI0_DA2 with pullup */
+							 AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD4 periph A MCI0_DA3 with pullup */
+					};
+					pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */
+							 AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */
+							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD7 periph A MCI0_DA6 with pullup, conflicts with TCLK0, PWMH3 */
+							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB24 periph A MCI1_CK, conflicts with GRX5 */
+							 AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */
+							 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */
+					};
+					pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
+						atmel,pins =
+							<AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */
+							 AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */
+							 AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */
+					};
+				};
+
+				nand0 {
+					pinctrl_nand0_ale_cle: nand0_ale_cle-0 {
+						atmel,pins =
+							<AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PE21 periph A with pullup */
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PE22 periph A with pullup */
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm0_pwmh0_0: pwm0_pwmh0-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D4 and LCDDAT20 */
+					};
+					pinctrl_pwm0_pwmh0_1: pwm0_pwmh0-1 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTX0 */
+					};
+					pinctrl_pwm0_pwml0_0: pwm0_pwml0-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D5 and LCDDAT21 */
+					};
+					pinctrl_pwm0_pwml0_1: pwm0_pwml0-1 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTX1 */
+					};
+
+					pinctrl_pwm0_pwmh1_0: pwm0_pwmh1-0 {
+						atmel,pins =
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D6 and LCDDAT22 */
+					};
+					pinctrl_pwm0_pwmh1_1: pwm0_pwmh1-1 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRX0 */
+					};
+					pinctrl_pwm0_pwmh1_2: pwm0_pwmh1-2 {
+						atmel,pins =
+							<AT91_PIOB 27 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with G125CKO and RTS1 */
+					};
+					pinctrl_pwm0_pwml1_0: pwm0_pwml1-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D7 and LCDDAT23 */
+					};
+					pinctrl_pwm0_pwml1_1: pwm0_pwml1-1 {
+						atmel,pins =
+							<AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRX1 */
+					};
+					pinctrl_pwm0_pwml1_2: pwm0_pwml1-2 {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with IRQ */
+					};
+
+					pinctrl_pwm0_pwmh2_0: pwm0_pwmh2-0 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTXCK */
+					};
+					pinctrl_pwm0_pwmh2_1: pwm0_pwmh2-1 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA4 and TIOA0 */
+					};
+					pinctrl_pwm0_pwml2_0: pwm0_pwml2-0 {
+						atmel,pins =
+							<AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTXEN */
+					};
+					pinctrl_pwm0_pwml2_1: pwm0_pwml2-1 {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA5 and TIOB0 */
+					};
+
+					pinctrl_pwm0_pwmh3_0: pwm0_pwmh3-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRXDV */
+					};
+					pinctrl_pwm0_pwmh3_1: pwm0_pwmh3-1 {
+						atmel,pins =
+							<AT91_PIOD 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA6 and TCLK0 */
+					};
+					pinctrl_pwm0_pwml3_0: pwm0_pwml3-0 {
+						atmel,pins =
+							<AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRXER */
+					};
+					pinctrl_pwm0_pwml3_1: pwm0_pwml3-1 {
+						atmel,pins =
+							<AT91_PIOD 8 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA7 */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD10 periph A SPI0_MISO pin */
+							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD11 periph A SPI0_MOSI pin */
+							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD12 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC22 periph A SPI1_MISO pin */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC23 periph A SPI1_MOSI pin */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC24 periph A SPI1_SPCK pin */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC16 periph A TK0 */
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC17 periph A TF0 */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC18 periph A TD0 */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC19 periph A RK0 */
+							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC20 periph A RF0 */
+							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC21 periph A RD0 */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx {
+						atmel,pins =
+							<AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB2 periph B TK1, conflicts with GTX2 */
+							 AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB3 periph B TF1, conflicts with GTX3 */
+							 AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB6 periph B TD1, conflicts with TD1 */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx {
+						atmel,pins =
+							<AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB7 periph B RK1, conflicts with EREFCK */
+							 AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB10 periph B RF1, conflicts with GTXER */
+							 AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB11 periph B RD1, conflicts with GRXCK */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* conflicts with PWMFI2, ISI_D8 */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* conflicts with ISI_PCK */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* conflicts with TWD0, ISI_VSYNC */
+							 AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with TWCK0, ISI_HSYNC */
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */
+							 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB26 periph A, conflicts with GRX7 */
+							 AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB27 periph A, conflicts with G125CKO */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* conflicts with A25 */
+							 AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts NCS0 */
+					};
+
+					pinctrl_usart2_rts_cts: usart2_rts_cts-0 {
+						atmel,pins =
+							<AT91_PIOE 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PE23 periph B, conflicts with A23 */
+							 AT91_PIOE 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PE24 periph B, conflicts with A24 */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* conflicts with A18 */
+							 AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with A19 */
+					};
+
+					pinctrl_usart3_rts_cts: usart3_rts_cts-0 {
+						atmel,pins =
+							<AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PE16 periph B, conflicts with A16 */
+							 AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PE17 periph B, conflicts with A17 */
+					};
+				};
+
+
+				pioA: gpio@fffff200 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff200 0x100>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				};
+
+				pioB: gpio@fffff400 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x100>;
+					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				};
+
+				pioC: gpio@fffff600 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x100>;
+					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				};
+
+				pioD: gpio@fffff800 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x100>;
+					interrupts = <9 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				};
+
+				pioE: gpio@fffffa00 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x100>;
+					interrupts = <10 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				};
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "atmel,sama5d3-pmc", "syscon";
+				reg = <0xfffffc00 0x120>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			reset_controller: reset-controller@fffffe00 {
+				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
+				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shutdown_controller: poweroff@fffffe10 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffe30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe30 0xf>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			watchdog: watchdog@fffffe40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffe40 0x10>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			clk32k: clock-controller@fffffe50 {
+				compatible = "atmel,sama5d3-sckc";
+				reg = <0xfffffe50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
+			};
+
+			rtc@fffffeb0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffeb0 0x30>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+			};
+		};
+
+		nfc_sram: sram@200000 {
+			compatible = "mmio-sram";
+			no-memory-wc;
+			reg = <0x200000 0x2400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x200000 0x2400>;
+		};
+
+		usb0: gadget@500000 {
+			compatible = "atmel,sama5d3-udc";
+			reg = <0x00500000 0x100000
+			       0xf8030000 0x4000>;
+			interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 33>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		usb1: usb@600000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: usb@700000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 32>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,sama5d3-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&hsmc>;
+			reg = <0x10000000 0x10000000
+			       0x40000000 0x30000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x40000000 0x10000000
+				  0x2 0x0 0x50000000 0x10000000
+				  0x3 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,sama5d3-nand-controller";
+				atmel,nfc-sram = <&nfc_sram>;
+				atmel,nfc-io = <&nfc_io>;
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		nfc_io: nfc-io@70000000 {
+			compatible = "atmel,sama5d3-nfc-io", "syscon";
+			reg = <0x70000000 0x8000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d31.dtsi b/arch/arm/boot/dts/microchip/sama5d31.dtsi
index 883878b32971..cbe8f275ecc4 100644
--- a/arch/arm/boot/dts/sama5d31.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d31.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * sama5d31.dtsi - Device Tree Include file for SAMA5D31 SoC
  *
  *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2 or later.
  */
 #include "sama5d3.dtsi"
 #include "sama5d3_lcd.dtsi"
diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/microchip/sama5d31ek.dts
index 25e4c0b2d786..1f2dfb3127ab 100644
--- a/arch/arm/boot/dts/sama5d31ek.dts
+++ b/arch/arm/boot/dts/microchip/sama5d31ek.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * sama5d31ek.dts - Device Tree file for SAMA5D31-EK board
  *
  *  Copyright (C) 2013 Atmel,
  *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "sama5d31.dtsi"
@@ -41,7 +40,7 @@
 	};
 
 	leds {
-		d3 {
+		led-d3 {
 			label = "d3";
 			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/sama5d33.dtsi b/arch/arm/boot/dts/microchip/sama5d33.dtsi
index 4b4434aca351..146fd59acea5 100644
--- a/arch/arm/boot/dts/sama5d33.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d33.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * sama5d33.dtsi - Device Tree Include file for SAMA5D33 SoC
  *
  *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2 or later.
  */
 #include "sama5d3.dtsi"
 #include "sama5d3_lcd.dtsi"
diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/microchip/sama5d33ek.dts
index c517b87a1de2..7d4ae1682933 100644
--- a/arch/arm/boot/dts/sama5d33ek.dts
+++ b/arch/arm/boot/dts/microchip/sama5d33ek.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * sama5d33ek.dts - Device Tree file for SAMA5D33-EK board
  *
  *  Copyright (C) 2013 Atmel,
  *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "sama5d33.dtsi"
diff --git a/arch/arm/boot/dts/sama5d34.dtsi b/arch/arm/boot/dts/microchip/sama5d34.dtsi
index aa01573fdee9..132918c889a0 100644
--- a/arch/arm/boot/dts/sama5d34.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d34.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * sama5d34.dtsi - Device Tree Include file for SAMA5D34 SoC
  *
  *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2 or later.
  */
 #include "sama5d3.dtsi"
 #include "sama5d3_lcd.dtsi"
diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/microchip/sama5d34ek.dts
index c8b8449fdc3e..18943b873fff 100644
--- a/arch/arm/boot/dts/sama5d34ek.dts
+++ b/arch/arm/boot/dts/microchip/sama5d34ek.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * sama5d34ek.dts - Device Tree file for SAMA5D34-EK board
  *
  *  Copyright (C) 2013 Atmel,
  *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "sama5d34.dtsi"
@@ -37,8 +36,8 @@
 			i2c1: i2c@f0018000 {
 				status = "okay";
 
-				24c256@50 {
-					compatible = "24c256";
+				eeprom@50 {
+					compatible = "atmel,24c256";
 					reg = <0x50>;
 					pagesize = <64>;
 				};
@@ -51,7 +50,7 @@
 	};
 
 	leds {
-		d3 {
+		led-d3 {
 			label = "d3";
 			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/sama5d35.dtsi b/arch/arm/boot/dts/microchip/sama5d35.dtsi
index 16c39f4c96a4..b2ccfa77c4be 100644
--- a/arch/arm/boot/dts/sama5d35.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d35.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * sama5d35.dtsi - Device Tree Include file for SAMA5D35 SoC
  *
  *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2 or later.
  */
 #include "sama5d3.dtsi"
 #include "sama5d3_gmac.dtsi"
diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/microchip/sama5d35ek.dts
index 6e261fcf576c..8edfcebb1df0 100644
--- a/arch/arm/boot/dts/sama5d35ek.dts
+++ b/arch/arm/boot/dts/microchip/sama5d35ek.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * sama5d35ek.dts - Device Tree file for SAMA5D35-EK board
  *
  *  Copyright (C) 2013 Atmel,
  *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "sama5d35.dtsi"
diff --git a/arch/arm/boot/dts/sama5d36.dtsi b/arch/arm/boot/dts/microchip/sama5d36.dtsi
index e85139ef40af..5d88f9967138 100644
--- a/arch/arm/boot/dts/sama5d36.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d36.dtsi
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * sama5d36.dtsi - Device Tree Include file for SAMA5D36 SoC
  *
  *  Copyright (C) 2013 Atmel,
  *                2013 Josh Wu <josh.wu@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 #include "sama5d3.dtsi"
 #include "sama5d3_can.dtsi"
diff --git a/arch/arm/boot/dts/sama5d36ek.dts b/arch/arm/boot/dts/microchip/sama5d36ek.dts
index cd458b85a205..26950f9284c2 100644
--- a/arch/arm/boot/dts/sama5d36ek.dts
+++ b/arch/arm/boot/dts/microchip/sama5d36ek.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * sama5d36ek.dts - Device Tree file for SAMA5D36-EK board
  *
  *  Copyright (C) 2013 Atmel,
  *                2013 Josh Wu <josh.wu@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "sama5d36.dtsi"
diff --git a/arch/arm/boot/dts/microchip/sama5d36ek_cmp.dts b/arch/arm/boot/dts/microchip/sama5d36ek_cmp.dts
new file mode 100644
index 000000000000..66695b9a3e77
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d36ek_cmp.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d36ek_cmp.dts - Device Tree file for SAMA5D36-EK CMP board
+ *
+ *  Copyright (C) 2016 Atmel,
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+#include "sama5d3xmb_cmp.dtsi"
+
+/ {
+	model = "Atmel SAMA5D36EK-CMP";
+	compatible = "atmel,sama5d36ek-cmp", "atmel,sama5d3xmb-cmp", "atmel,sama5d3xcm-cmp", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/microchip/sama5d3_can.dtsi
index c5a3772741bf..9ac29bf3f933 100644
--- a/arch/arm/boot/dts/sama5d3_can.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3_can.dtsi
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * sama5d3_can.dtsi - Device Tree Include file for SAMA5D3 SoC with
  * CAN support
  *
  * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2.
  */
 
 #include <dt-bindings/pinctrl/at91.h>
@@ -32,29 +31,13 @@
 
 			};
 
-			pmc: pmc@fffffc00 {
-				periphck {
-					can0_clk: can0_clk {
-						#clock-cells = <0>;
-						reg = <40>;
-						atmel,clk-output-range = <0 66000000>;
-					};
-
-					can1_clk: can1_clk {
-						#clock-cells = <0>;
-						reg = <41>;
-						atmel,clk-output-range = <0 66000000>;
-					};
-				};
-			};
-
 			can0: can@f000c000 {
 				compatible = "atmel,at91sam9x5-can";
 				reg = <0xf000c000 0x300>;
 				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_can0_rx_tx>;
-				clocks = <&can0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
 				clock-names = "can_clk";
 				status = "disabled";
 			};
@@ -65,7 +48,7 @@
 				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_can1_rx_tx>;
-				clocks = <&can1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
 				clock-names = "can_clk";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/microchip/sama5d3_emac.dtsi
index 7cb235ef0fb6..5d7ce13de8cc 100644
--- a/arch/arm/boot/dts/sama5d3_emac.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3_emac.dtsi
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * sama5d3_emac.dtsi - Device Tree Include file for SAMA5D3 SoC with
  * Ethernet.
  *
  * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2.
  */
 
 #include <dt-bindings/pinctrl/at91.h>
@@ -31,22 +30,16 @@
 				};
 			};
 
-			pmc: pmc@fffffc00 {
-				periphck {
-					macb1_clk: macb1_clk {
-						#clock-cells = <0>;
-						reg = <35>;
-					};
-				};
+			pmc: clock-controller@fffffc00 {
 			};
 
 			macb1: ethernet@f802c000 {
-				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				compatible = "atmel,sama5d3-macb", "cdns,at91sam9260-macb", "cdns,macb";
 				reg = <0xf802c000 0x100>;
 				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb1_rmii>;
-				clocks = <&macb1_clk>, <&macb1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_PERIPHERAL 35>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/sama5d3_gmac.dtsi b/arch/arm/boot/dts/microchip/sama5d3_gmac.dtsi
index 23f225fbb756..884df7a54dbb 100644
--- a/arch/arm/boot/dts/sama5d3_gmac.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3_gmac.dtsi
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * sama5d3_gmac.dtsi - Device Tree Include file for SAMA5D3 SoC with
  * Gigabit Ethernet.
  *
  * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2.
  */
 
 #include <dt-bindings/pinctrl/at91.h>
@@ -64,22 +63,13 @@
 				};
 			};
 
-			pmc: pmc@fffffc00 {
-				periphck {
-					macb0_clk: macb0_clk {
-						#clock-cells = <0>;
-						reg = <34>;
-					};
-				};
-			};
-
 			macb0: ethernet@f0028000 {
 				compatible = "atmel,sama5d3-gem";
 				reg = <0xf0028000 0x100>;
 				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
-				clocks = <&macb0_clk>, <&macb0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_PERIPHERAL 34>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/microchip/sama5d3_lcd.dtsi
index be7cfefc6c31..308d2fc276d6 100644
--- a/arch/arm/boot/dts/sama5d3_lcd.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3_lcd.dtsi
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * sama5d3_lcd.dtsi - Device Tree Include file for SAMA5D3 SoC with
  * LCD support
  *
  * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2.
  */
 
 #include <dt-bindings/pinctrl/at91.h>
@@ -17,7 +16,7 @@
 				compatible = "atmel,sama5d3-hlcdc";
 				reg = <0xf0030000 0x2000>;
 				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
 				clock-names = "periph_clk","sys_clk", "slow_clk";
 				status = "disabled";
 
@@ -193,23 +192,6 @@
 					};
 				};
 			};
-
-			pmc: pmc@fffffc00 {
-				periphck {
-					lcdc_clk: lcdc_clk {
-						#clock-cells = <0>;
-						reg = <36>;
-					};
-				};
-
-				systemck {
-					lcdck: lcdck {
-						#clock-cells = <0>;
-						reg = <3>;
-						clocks = <&mck>;
-					};
-				};
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/microchip/sama5d3_mci2.dtsi
index e21099a1aef9..7141ee97ec3e 100644
--- a/arch/arm/boot/dts/sama5d3_mci2.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3_mci2.dtsi
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * sama5d3_mci2.dtsi - Device Tree Include file for SAMA5D3 SoC with
  * 3 MMC ports
  *
  * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2.
  */
 
 #include <dt-bindings/pinctrl/at91.h>
@@ -31,15 +30,6 @@
 				};
 			};
 
-			pmc: pmc@fffffc00 {
-				periphck {
-					mci2_clk: mci2_clk {
-						#clock-cells = <0>;
-						reg = <23>;
-					};
-				};
-			};
-
 			mmc2: mmc@f8004000 {
 				compatible = "atmel,hsmci";
 				reg = <0xf8004000 0x600>;
@@ -48,7 +38,7 @@
 				dma-names = "rxtx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
-				clocks = <&mci2_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
 				clock-names = "mci_clk";
 				status = "disabled";
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/microchip/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/microchip/sama5d3_tcb1.dtsi
new file mode 100644
index 000000000000..2b18c5c2cc03
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d3_tcb1.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sama5d3_tcb1.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * 2 TC blocks.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	aliases {
+		tcb1 = &tcb1;
+	};
+
+	ahb {
+		apb {
+			tcb1: timer@f8014000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8014000 0x100>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama5d3_uart.dtsi b/arch/arm/boot/dts/microchip/sama5d3_uart.dtsi
new file mode 100644
index 000000000000..44d1173f2ffb
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d3_uart.dtsi
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sama5d3_uart.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * UART support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	aliases {
+		serial5 = &uart0;
+		serial6 = &uart1;
+	};
+
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* conflicts with PWMFI2, ISI_D8 */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* conflicts with ISI_PCK */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* conflicts with TWD0, ISI_VSYNC */
+							 AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with TWCK0, ISI_HSYNC */
+					};
+				};
+			};
+
+			uart0: serial@f0024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf0024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@f8028000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8028000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/microchip/sama5d3xcm.dtsi
index 9506daf5efb6..7d1d7859edb4 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3xcm.dtsi
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * sama5d3xcm.dtsi - Device Tree Include file for SAMA5D3x CPU Module
  *
  *  Copyright (C) 2013 Atmel,
  *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 
 / {
@@ -15,7 +14,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x20000000>;
 	};
 
@@ -34,6 +33,18 @@
 			spi0: spi@f0004000 {
 				cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
 			};
+
+			tcb0: timer@f0010000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
 		};
 
 		ebi@10000000 {
@@ -119,7 +130,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		d2 {
+		led-d2 {
 			label = "d2";
 			gpios = <&pioE 25 GPIO_ACTIVE_LOW>;	/* PE25, conflicts with A25, RXD2 */
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi b/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi
new file mode 100644
index 000000000000..362806afef44
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d3xcm_cmp.dtsi - Device Tree Include file for SAMA5D36 CMP CPU Module
+ *
+ *  Copyright (C) 2016 Atmel,
+ */
+
+/ {
+	compatible = "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+			};
+
+			tcb0: timer@f0010000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+			};
+
+			i2c1: i2c@f0018000 {
+				act8865: pmic@5b {
+					compatible = "active-semi,act8865";
+					reg = <0x5b>;
+					status = "disabled";
+
+					regulators {
+						vcc_1v8_reg: DCDC_REG1 {
+							regulator-name = "VCC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-always-on;
+						};
+
+						vcc_1v2_reg: DCDC_REG2 {
+							regulator-name = "VCC_1V2";
+							regulator-min-microvolt = <1100000>;
+							regulator-max-microvolt = <1300000>;
+							regulator-always-on;
+						};
+
+						vcc_3v3_reg: DCDC_REG3 {
+							regulator-name = "VCC_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddana_reg: LDO_REG1 {
+							regulator-name = "VDDANA";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddfuse_reg: LDO_REG2 {
+							regulator-name = "FUSE_2V5";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+						};
+					};
+				};
+			};
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-ecc-strength = <4>;
+					nand-ecc-step-size = <512>;
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0x80000>;
+						};
+
+						bootloaderenv@c0000 {
+							label = "bootloader env";
+							reg = <0xc0000 0xc0000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-d2 {
+			label = "d2";
+			gpios = <&pioE 25 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3xdm.dtsi b/arch/arm/boot/dts/microchip/sama5d3xdm.dtsi
index 035ab72b3990..3c1c4d62fbf9 100644
--- a/arch/arm/boot/dts/sama5d3xdm.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3xdm.dtsi
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * sama5d3dm.dtsi - Device Tree file for SAMA5 display module
  *
  *  Copyright (C) 2013 Atmel,
  *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 
 / {
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi
index 6d252ad050f6..90da04b84b39 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * sama5d3xmb.dts - Device Tree file for SAMA5D3x mother board
  *
  *  Copyright (C) 2013 Atmel,
  *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 #include "sama5d3xcm.dtsi"
 
@@ -27,7 +26,7 @@
 			spi0: spi@f0004000 {
 				dmas = <0>, <0>;	/*  Do not use DMA for spi0 */
 
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
@@ -47,13 +46,13 @@
 				wm8904: wm8904@1a {
 					compatible = "wlf,wm8904";
 					reg = <0x1a>;
-					clocks = <&pck0>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 8>;
 					clock-names = "mclk";
 				};
 			};
 
 			i2c1: i2c@f0018000 {
-				ov2640: camera@0x30 {
+				ov2640: camera@30 {
 					compatible = "ovti,ov2640";
 					reg = <0x30>;
 					pinctrl-names = "default";
@@ -61,9 +60,9 @@
 					resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
 					pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
 					/* use pck1 for the master clock of ov2640 */
-					clocks = <&pck1>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 9>;
 					clock-names = "xvclk";
-					assigned-clocks = <&pck1>;
+					assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
 					assigned-clock-rates = <25000000>;
 
 					port {
@@ -166,14 +165,14 @@
 			};
 		};
 
-		usb0: gadget@00500000 {
+		usb0: gadget@500000 {
 			atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usba_vbus>;
 			status = "okay";
 		};
 
-		usb1: ohci@00600000 {
+		usb1: usb@600000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH
 					   &pioD 26 GPIO_ACTIVE_LOW
@@ -182,7 +181,7 @@
 			status = "okay";
 		};
 
-		usb2: ehci@00700000 {
+		usb2: usb@700000 {
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/microchip/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/microchip/sama5d3xmb_cmp.dtsi
new file mode 100644
index 000000000000..5d9e97fecf83
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d3xmb_cmp.dtsi
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d3xmb_cmp.dts - Device Tree file for SAMA5D3x CMP mother board
+ *
+ *  Copyright (C) 2016 Atmel,
+ */
+#include "sama5d3xcm_cmp.dtsi"
+
+/ {
+	compatible = "atmel,sama5d3xmb-cmp", "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			mmc0: mmc@f0000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			spi0: spi@f0004000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for spi0 */
+
+				flash@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			ssc0: ssc@f0008000 {
+				atmel,clk-from-rk-pin;
+			};
+
+			/*
+			 * i2c0 conflicts with ISI:
+			 * disable it to allow the use of ISI
+			 * can not enable audio when i2c0 disabled
+			 */
+			i2c0: i2c@f0014000 {
+				wm8904: wm8904@1a {
+					compatible = "wlf,wm8904";
+					reg = <0x1a>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+					clock-names = "mclk";
+				};
+			};
+
+			i2c1: i2c@f0018000 {
+				ov2640: camera@30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+					/* use pck1 for the master clock of ov2640 */
+					clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
+			};
+
+			usart1: serial@f0020000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for usart1 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+				status = "okay";
+			};
+
+			isi: isi@f0034000 {
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
+					};
+				};
+			};
+
+			mmc1: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			adc0: adc@f8018000 {
+				pinctrl-names = "default", "sleep";
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				pinctrl-1 = <
+					&pinctrl_adc0_adtrg_sleep
+					&pinctrl_adc0_ad0_sleep
+					&pinctrl_adc0_ad1_sleep
+					&pinctrl_adc0_ad2_sleep
+					&pinctrl_adc0_ad3_sleep
+					&pinctrl_adc0_ad4_sleep
+					>;
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy0: ethernet-phy@1 {
+					/*interrupt-parent = <&pioE>;*/
+					/*interrupts = <30 IRQ_TYPE_EDGE_FALLING>;*/
+					reg = <1>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				adc0 {
+					pinctrl_adc0_adtrg_sleep: adc0_adtrg_1 {
+						atmel,pins =
+							<AT91_PIOD 19 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+					};
+					pinctrl_adc0_ad0_sleep: adc0_ad0_1 {
+						atmel,pins =
+							<AT91_PIOD 20 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+					};
+					pinctrl_adc0_ad1_sleep: adc0_ad1_1 {
+						atmel,pins =
+							<AT91_PIOD 21 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+					};
+					pinctrl_adc0_ad2_sleep: adc0_ad2_1 {
+						atmel,pins =
+							<AT91_PIOD 22 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+					};
+					pinctrl_adc0_ad3_sleep: adc0_ad3_1 {
+						atmel,pins =
+							<AT91_PIOD 23 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+					};
+					pinctrl_adc0_ad4_sleep: adc0_ad4_1 {
+						atmel,pins =
+							<AT91_PIOD 24 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+					};
+				};
+
+				board {
+					pinctrl_gpio_keys: gpio_keys {
+						atmel,pins =
+							<AT91_PIOE 27 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_power: sensor_power-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+				status = "okay";
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+		};
+
+		usb0: gadget@500000 {
+			atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+		atmel,model = "wm8904 @ SAMA5D3EK";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+
+		status = "disabled";
+	};
+
+	/* Conflict with LCD pins */
+	gpio_keys {
+		compatible = "gpio-keys";
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3xmb_emac.dtsi b/arch/arm/boot/dts/microchip/sama5d3xmb_emac.dtsi
index 2fd14f371a04..a5dd41cd9522 100644
--- a/arch/arm/boot/dts/sama5d3xmb_emac.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3xmb_emac.dtsi
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * sama5d3xmb_emac.dts - Device Tree Include file for SAMA5D3x mother board
  * Ethernet
  *
  *  Copyright (C) 2016 Atmel,
- *
- * Licensed under GPLv2 or later.
  */
 
 / {
diff --git a/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi b/arch/arm/boot/dts/microchip/sama5d3xmb_gmac.dtsi
index 65aea7a75b1d..d750da38ff3c 100644
--- a/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3xmb_gmac.dtsi
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * sama5d3xmb_gmac.dtsi - Device Tree Include file for SAMA5D3x motherboard
  * Gigabit Ethernet
  *
  *  Copyright (C) 2016 Atmel,
- *
- * Licensed under GPLv2 or later.
  */
 
 / {
diff --git a/arch/arm/boot/dts/microchip/sama5d4.dtsi b/arch/arm/boot/dts/microchip/sama5d4.dtsi
new file mode 100644
index 000000000000..ec1d68c640de
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d4.dtsi
@@ -0,0 +1,1456 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d4.dtsi - Device Tree Include file for SAMA5D4 family SoC
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel SAMA5D4 family SoC";
+	compatible = "atmel,sama5d4";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &usart3;
+		serial1 = &usart4;
+		serial2 = &usart2;
+		serial3 = &usart0;
+		serial4 = &usart1;
+		serial5 = &uart0;
+		serial6 = &uart1;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		pwm0 = &pwm0;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0>;
+			d-cache-size = <0x8000>;	// L1, 32 KB
+			i-cache-size = <0x8000>;	// L1, 32 KB
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	ns_sram: sram@210000 {
+		compatible = "mmio-sram";
+		reg = <0x00210000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00210000 0x10000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		nfc_sram: sram@100000 {
+			compatible = "mmio-sram";
+			no-memory-wc;
+			reg = <0x100000 0x2400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x100000 0x2400>;
+		};
+
+		vdec0: vdec@300000 {
+			compatible = "microchip,sama5d4-vdec";
+			reg = <0x00300000 0x100000>;
+			interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+		};
+
+		usb0: gadget@400000 {
+			compatible = "atmel,sama5d3-udc";
+			reg = <0x00400000 0x100000
+			       0xfc02c000 0x4000>;
+			interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		usb1: usb@500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: usb@600000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 46>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		L2: cache-controller@a00000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a00000 0x1000>;
+			interrupts = <67 IRQ_TYPE_LEVEL_HIGH 4>;
+			cache-unified;
+			cache-level = <2>;
+			cache-size = <0x20000>;		// L2, 128 KB
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,sama5d3-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&hsmc>;
+			reg = <0x10000000 0x10000000
+			       0x60000000 0x28000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x60000000 0x10000000
+				  0x2 0x0 0x70000000 0x10000000
+				  0x3 0x0 0x80000000 0x8000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,sama5d3-nand-controller";
+				atmel,nfc-sram = <&nfc_sram>;
+				atmel,nfc-io = <&nfc_io>;
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		nfc_io: nfc-io@90000000 {
+			compatible = "atmel,sama5d3-nfc-io", "syscon";
+			reg = <0x90000000 0x8000000>;
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			hlcdc: hlcdc@f0000000 {
+				compatible = "atmel,sama5d4-hlcdc";
+				reg = <0xf0000000 0x4000>;
+				interrupts = <51 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
+			};
+
+			dma1: dma-controller@f0004000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0004000 0x200>;
+				interrupts = <50 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 50>;
+				clock-names = "dma_clk";
+			};
+
+			isi: isi@f0008000 {
+				compatible = "atmel,at91sam9g45-isi";
+				reg = <0xf0008000 0x4000>;
+				interrupts = <52 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			ramc0: ramc@f0010000 {
+				compatible = "atmel,sama5d3-ddramc";
+				reg = <0xf0010000 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			dma0: dma-controller@f0014000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0014000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "dma_clk";
+			};
+
+			pmc: clock-controller@f0018000 {
+				compatible = "atmel,sama5d4-pmc", "syscon";
+				reg = <0xf0018000 0x120>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			mmc0: mmc@f8000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf8000000 0x600>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(0))>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
+				clock-names = "mci_clk";
+			};
+
+			uart0: serial@f8004000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8004000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(22))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(23))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@f8008000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf8008000 0x4000>;
+				interrupts = <48 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(26))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(27))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			pwm0: pwm@f800c000 {
+				compatible = "atmel,sama5d3-pwm";
+				reg = <0xf800c000 0x300>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				status = "disabled";
+			};
+
+			spi0: spi@f8010000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf8010000 0x100>;
+				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(10))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(11))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8014000 {
+				compatible = "atmel,sama5d4-i2c";
+				reg = <0xf8014000 0x4000>;
+				interrupts = <32 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(2))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f8018000 {
+				compatible = "atmel,sama5d4-i2c";
+				reg = <0xf8018000 0x4000>;
+				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(4))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(5))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioE 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				status = "disabled";
+			};
+
+			tcb0: timer@f801c000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf801c000 0x100>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			macb0: ethernet@f8020000 {
+				compatible = "atmel,sama5d4-gem";
+				reg = <0xf8020000 0x100>;
+				interrupts = <54 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 54>, <&pmc PMC_TYPE_PERIPHERAL 54>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			i2c2: i2c@f8024000 {
+				compatible = "atmel,sama5d4-i2c";
+				reg = <0xf8024000 0x4000>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(6))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c2>;
+				pinctrl-1 = <&pinctrl_i2c2_gpio>;
+				sda-gpios = <&pioB 29 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioB 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+				status = "disabled";
+			};
+
+			sfr: sfr@f8028000 {
+				compatible = "atmel,sama5d4-sfr", "syscon";
+				reg = <0xf8028000 0x60>;
+			};
+
+			usart0: serial@f802c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf802c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(36))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(37))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts &pinctrl_usart0_cts>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@f8030000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8030000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(38))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(39))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts &pinctrl_usart1_cts>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			mmc1: mmc@fc000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfc000000 0x600>;
+				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>;
+				clock-names = "mci_clk";
+			};
+
+			uart1: serial@fc004000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc004000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(24))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(25))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fc008000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc008000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(16))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(17))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts &pinctrl_usart2_cts>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fc00c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc00c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(18))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(19))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart4: serial@fc010000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc010000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <31 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(20))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(21))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart4>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 31>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fc014000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xfc014000 0x4000>;
+				interrupts = <49 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(28))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(29))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			spi1: spi@fc018000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfc018000 0x100>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(12))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(13))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi2: spi@fc01c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfc01c000 0x100>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(14))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(15))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			tcb1: timer@fc020000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfc020000 0x100>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			tcb2: timer@fc024000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfc024000 0x100>;
+				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			macb1: ethernet@fc028000 {
+				compatible = "atmel,sama5d4-gem";
+				reg = <0xfc028000 0x100>;
+				interrupts = <55 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_PERIPHERAL 55>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			trng: rng@fc030000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xfc030000 0x100>;
+				interrupts = <53 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 53>;
+			};
+
+			adc0: adc@fc034000 {
+				compatible = "atmel,at91sam9x5-adc";
+				reg = <0xfc034000 0x100>;
+				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 44>,
+					 <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-channels-used = <0x01f>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-use-external-triggers;
+				atmel,adc-vref = <3000>;
+				atmel,adc-sample-hold-time = <11>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+				status = "disabled";
+			};
+
+			aes: crypto@fc044000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xfc044000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(41))>,
+				       <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(40))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "aes_clk";
+			};
+
+			tdes: crypto@fc04c000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xfc04c000 0x100>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(42))>,
+				       <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(43))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "tdes_clk";
+			};
+
+			sha: crypto@fc050000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xfc050000 0x100>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(44))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "sha_clk";
+			};
+
+			hsmc: smc@fc05c000 {
+				compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
+				reg = <0xfc05c000 0x1000>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH 6>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				pmecc: ecc-engine@ffffc070 {
+					compatible = "atmel,sama5d4-pmecc";
+					reg = <0xfc05c070 0x490>,
+					      <0xfc05c500 0x100>;
+				};
+			};
+
+			reset_controller: reset-controller@fc068600 {
+				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
+				reg = <0xfc068600 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shutdown_controller: poweroff@fc068610 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfc068610 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fc068630 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfc068630 0x10>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
+			};
+
+			watchdog: watchdog@fc068640 {
+				compatible = "atmel,sama5d4-wdt";
+				reg = <0xfc068640 0x10>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			clk32k: clock-controller@fc068650 {
+				compatible = "atmel,sama5d4-sckc";
+				reg = <0xfc068650 0x4>;
+				#clock-cells = <0>;
+				clocks = <&slow_xtal>;
+			};
+
+			rtc@fc0686b0 {
+				compatible = "atmel,sama5d4-rtc";
+				reg = <0xfc0686b0 0x30>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+			};
+
+			dbgu: serial@fc069000 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfc069000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+
+			pinctrl: pinctrl@fc06a000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,sama5d3-pinctrl", "simple-mfd";
+				ranges = <0xfc068000 0xfc068000 0x100
+					  0xfc06a000 0xfc06a000 0x4000>;
+				/* WARNING: revisit as pin spec has changed */
+				atmel,mux-mask = <
+					/*   A          B          C  */
+					0xffffffff 0x3ffcfe7c 0x1c010101	/* pioA */
+					0x7fffffff 0xfffccc3a 0x3f00cc3a	/* pioB */
+					0xffffffff 0x3ff83fff 0xff00ffff	/* pioC */
+					0xb003ff00 0x8002a800 0x00000000	/* pioD */
+					0xffffffff 0x7fffffff 0x76fff1bf	/* pioE */
+					>;
+
+				pioA: gpio@fc06a000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc06a000 0x100>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+				};
+
+				pioB: gpio@fc06b000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc06b000 0x100>;
+					interrupts = <24 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				};
+
+				pioC: gpio@fc06c000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc06c000 0x100>;
+					interrupts = <25 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
+				};
+
+				pioD: gpio@fc068000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc068000 0x100>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				};
+
+				pioE: gpio@fc06d000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc06d000 0x100>;
+					interrupts = <26 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
+				};
+
+				/* pinctrl pin settings */
+				adc0 {
+					pinctrl_adc0_adtrg: adc0_adtrg {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* conflicts with USBA_VBUS */
+					};
+					pinctrl_adc0_ad0: adc0_ad0 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad1: adc0_ad1 {
+						atmel,pins =
+							<AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad2: adc0_ad2 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad3: adc0_ad3 {
+						atmel,pins =
+							<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad4: adc0_ad4 {
+						atmel,pins =
+							<AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* conflicts with D14 and TDI */
+							 AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;		/* conflicts with D15 and TDO */
+					};
+				};
+
+				ebi {
+					pinctrl_ebi_addr: ebi-addr-0 {
+						atmel,pins =
+							<AT91_PIOE 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nand_addr: ebi-addr-1 {
+						atmel,pins =
+							<AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs0: ebi-cs0-0 {
+						atmel,pins =
+							<AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs1: ebi-cs1-0 {
+						atmel,pins =
+							<AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs2: ebi-cs2-0 {
+						atmel,pins =
+							<AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs3: ebi-cs3-0 {
+						atmel,pins =
+							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
+						atmel,pins =
+							<AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_data_8_15: ebi-data-msb-0 {
+						atmel,pins =
+							<AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nandrdy: ebi-nandrdy-0 {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nrd_nandoe: ebi-nrd-nandoe-0 {
+						atmel,pins =
+							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nwait: ebi-nwait-0 {
+						atmel,pins =
+							<AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nwe_nandwe: ebi-nwe-nandwe-0 {
+						atmel,pins =
+							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nwr1_nbs1: ebi-nwr1-nbs1-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_i2c0_gpio: i2c0-gpio {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_C AT91_PINCTRL_NONE	/* TWD1, conflicts with UART0 RX and DIBP */
+							 AT91_PIOE 30 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* TWCK1, conflicts with UART0 TX and DIBN */
+					};
+
+					pinctrl_i2c1_gpio: i2c1-gpio {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2: i2c2-0 {
+						atmel,pins =
+							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* TWD2, conflicts with RD0 and PWML1 */
+							 AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* TWCK2, conflicts with RF0 */
+					};
+
+					pinctrl_i2c2_gpio: i2c2-gpio {
+						atmel,pins =
+							<AT91_PIOB 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOB 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				isi {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D0 */
+							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D1 */
+							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D2 */
+							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D3 */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D4 */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D5 */
+							 AT91_PIOC 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D6 */
+							 AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D7 */
+							 AT91_PIOB  1 AT91_PERIPH_C AT91_PINCTRL_NONE	/* ISI_PCK, conflict with G0_RXCK */
+							 AT91_PIOB  3 AT91_PERIPH_C AT91_PINCTRL_NONE	/* ISI_VSYNC */
+							 AT91_PIOB  4 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_HSYNC */
+					};
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE	/* ISI_D8, conflicts with SPI0_MISO, PWMH2 */
+							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_D9, conflicts with SPI0_MOSI, PWML2 */
+					};
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE	/* ISI_D10, conflicts with SPI0_SPCK, PWMH3 */
+							 AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_D11, conflicts with SPI0_NPCS0, PWML3 */
+					};
+				};
+
+				lcd {
+					pinctrl_lcd_base: lcd-base-0 {
+						atmel,pins =
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+					};
+					pinctrl_lcd_pwm: lcd-pwm-0 {
+						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+					};
+					pinctrl_lcd_rgb444: lcd-rgb-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD11 pin */
+					};
+					pinctrl_lcd_rgb565: lcd-rgb-1 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD15 pin */
+					};
+					pinctrl_lcd_rgb666: lcd-rgb-2 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+					pinctrl_lcd_rgb777: lcd-rgb-3 {
+						atmel,pins =
+							 /* LCDDAT0 conflicts with TMS */
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 /* LCDDAT8 conflicts with TCK */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 /* LCDDAT16 conflicts with NTRST */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+					pinctrl_lcd_rgb888: lcd-rgb-4 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+				};
+
+				macb0 {
+					pinctrl_macb0_rmii: macb0_rmii-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TX0 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TX1 */
+							 AT91_PIOB  8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RX0 */
+							 AT91_PIOB  9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RX1 */
+							 AT91_PIOB  6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RXDV */
+							 AT91_PIOB  7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RXER */
+							 AT91_PIOB  2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TXEN */
+							 AT91_PIOB  0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TXCK */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_MDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_MDIO */
+							>;
+					};
+				};
+
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TX0 */
+							 AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TX1 */
+							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RX0 */
+							 AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RX1 */
+							 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RXDV */
+							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RXER */
+							 AT91_PIOA  4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TXEN */
+							 AT91_PIOA  2 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TXCK */
+							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_MDC */
+							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_MDIO */
+							>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* MCI0_CK, conflict with PCK1(ISI_MCK) */
+							 AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_CDA, conflict with NAND_D0 */
+							 AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA0, conflict with NAND_D1 */
+							>;
+					};
+					pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
+						atmel,pins =
+							<AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA1, conflict with NAND_D2 */
+							 AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA2, conflict with NAND_D3 */
+							 AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA3, conflict with NAND_D4 */
+							>;
+					};
+					pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA4, conflict with NAND_D5 */
+							 AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA5, conflict with NAND_D6 */
+							 AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA6, conflict with NAND_D7 */
+							 AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA7, conflict with NAND_OE */
+							>;
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOE 18 AT91_PERIPH_C AT91_PINCTRL_NONE		/* MCI1_CK */
+							 AT91_PIOE 19 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_CDA */
+							 AT91_PIOE 20 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA0 */
+							>;
+					};
+					pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
+						atmel,pins =
+							<AT91_PIOE 21 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA1 */
+							 AT91_PIOE 22 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA2 */
+							 AT91_PIOE 23 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA3 */
+							>;
+					};
+				};
+
+				nand0 {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC13 periph A Read Enable */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC14 periph A Write Enable */
+
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC17 ALE */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC18 CLE */
+
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC15 NCS3/Chip Enable */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC16 NANDRDY */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC5 Data bit 0 */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 Data bit 1 */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 Data bit 2 */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 Data bit 3 */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC9 Data bit 4 */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC10 Data bit 5 */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC11 periph A Data bit 6 */
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC12 periph A Data bit 7 */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI0_MISO */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI0_MOSI */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI0_SPCK */
+							>;
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx {
+						atmel,pins =
+							<AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TK0 */
+							 AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TF0 */
+							 AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* TD0 */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx {
+						atmel,pins =
+							<AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* RK0 */
+							 AT91_PIOB 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* RF0 */
+							 AT91_PIOB 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* RD0 */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TK1 */
+							 AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TF1 */
+							 AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* TD1 */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx {
+						atmel,pins =
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* RK1 */
+							 AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* RF1 */
+							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* RD1 */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI1_MISO */
+							 AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI1_MOSI */
+							 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI1_SPCK */
+							>;
+					};
+				};
+
+				spi2 {
+					pinctrl_spi2: spi2-0 {
+						atmel,pins =
+							<AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE	/* SPI2_MISO conflicts with RTS0 */
+							 AT91_PIOD 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* SPI2_MOSI conflicts with TXD0 */
+							 AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE	/* SPI2_SPCK conflicts with RTS1 */
+							>;
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* RXD */
+							 AT91_PIOE 30 AT91_PERIPH_B AT91_PINCTRL_NONE		/* TXD */
+							>;
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* RXD */
+							 AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE		/* TXD */
+							>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* RXD */
+							 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE		/* TXD */
+							>;
+					};
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins = <AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins = <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* RXD */
+							 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE		/* TXD */
+							>;
+					};
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins = <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins = <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP		/* RXD - conflicts with G0_CRS, ISI_HSYNC */
+							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE		/* TXD - conflicts with G0_COL, PCK2 */
+							>;
+					};
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with G0_RX3, PWMH1 */
+					};
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with G0_TXER, ISI_VSYNC */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* RXD */
+							 AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE		/* TXD */
+							>;
+					};
+				};
+
+				usart4 {
+					pinctrl_usart4: usart4-0 {
+						atmel,pins =
+							<AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* RXD */
+							 AT91_PIOE 27 AT91_PERIPH_B AT91_PINCTRL_NONE		/* TXD */
+							>;
+					};
+					pinctrl_usart4_rts: usart4_rts-0 {
+						atmel,pins = <AT91_PIOE 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with NWAIT, A19 */
+					};
+					pinctrl_usart4_cts: usart4_cts-0 {
+						atmel,pins = <AT91_PIOE 0 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with A0/NBS0, MCI0_CDB */
+					};
+				};
+			};
+
+			aic: interrupt-controller@fc06e000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,sama5d4-aic";
+				interrupt-controller;
+				reg = <0xfc06e000 0x200>;
+				atmel,external-irqs = <56>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama7d65-pinfunc.h b/arch/arm/boot/dts/microchip/sama7d65-pinfunc.h
new file mode 100644
index 000000000000..c591f333cacb
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama7d65-pinfunc.h
@@ -0,0 +1,947 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+#define PINMUX_PIN(no, func, ioset) \
+(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20))
+
+#define PIN_PA0				0
+#define PIN_PA0__GPIO			PINMUX_PIN(PIN_PA0, 0, 0)
+#define PIN_PA0__SDMMC0_CK		PINMUX_PIN(PIN_PA0, 1, 1)
+#define PIN_PA0__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA0, 2, 1)
+#define PIN_PA0__NWER0			PINMUX_PIN(PIN_PA0, 3, 1)
+
+#define PIN_PA1				1
+#define PIN_PA1__GPIO			PINMUX_PIN(PIN_PA1, 0, 0)
+#define PIN_PA1__SDMMC0_CMD		PINMUX_PIN(PIN_PA1, 1, 1)
+#define PIN_PA1__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA1, 2, 1)
+#define PIN_PA1__A21			PINMUX_PIN(PIN_PA1, 3, 1)
+
+#define PIN_PA2				2
+#define PIN_PA2__GPIO			PINMUX_PIN(PIN_PA2, 0, 0)
+#define PIN_PA2__SDMMC0_RSTN		PINMUX_PIN(PIN_PA2, 1, 1)
+#define PIN_PA2__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA2, 2, 1)
+#define PIN_PA2__A22			PINMUX_PIN(PIN_PA2, 3, 1)
+
+#define PIN_PA3				3
+#define PIN_PA3__GPIO			PINMUX_PIN(PIN_PA3, 0, 0)
+#define PIN_PA3__SDMMC0_DAT0		PINMUX_PIN(PIN_PA3, 1, 1)
+#define PIN_PA3__FLEXCOM3_IO3		PINMUX_PIN(PIN_PA3, 2, 1)
+#define PIN_PA3__D0			PINMUX_PIN(PIN_PA3, 3, 1)
+
+#define PIN_PA4				4
+#define PIN_PA4__GPIO			PINMUX_PIN(PIN_PA4, 0, 0)
+#define PIN_PA4__SDMMC0_DAT1		PINMUX_PIN(PIN_PA4, 1, 1)
+#define PIN_PA4__FLEXCOM3_IO4		PINMUX_PIN(PIN_PA4, 2, 1)
+#define PIN_PA4__D1			PINMUX_PIN(PIN_PA4, 3, 1)
+
+#define PIN_PA5				5
+#define PIN_PA5__GPIO			PINMUX_PIN(PIN_PA5, 0, 0)
+#define PIN_PA5__SDMMC0_DAT4		PINMUX_PIN(PIN_PA5, 1, 1)
+#define PIN_PA5__FLEXCOM2_IO0		PINMUX_PIN(PIN_PA5, 2, 3)
+#define PIN_PA5__D4			PINMUX_PIN(PIN_PA5, 3, 1)
+#define PIN_PA5__TCLK4			PINMUX_PIN(PIN_PA5, 6, 3)
+
+#define PIN_PA6				6
+#define PIN_PA6__GPIO			PINMUX_PIN(PIN_PA6, 0, 0)
+#define PIN_PA6__SDMMC0_DAT5		PINMUX_PIN(PIN_PA6, 1, 1)
+#define PIN_PA6__FLEXCOM2_IO1		PINMUX_PIN(PIN_PA6, 2, 3)
+#define PIN_PA6__D5			PINMUX_PIN(PIN_PA6, 3, 1)
+#define PIN_PA6__TIOB4			PINMUX_PIN(PIN_PA6, 6, 3)
+
+#define PIN_PA7				7
+#define PIN_PA7__GPIO			PINMUX_PIN(PIN_PA7, 0, 0)
+#define PIN_PA7__SDMMC0_DAT6		PINMUX_PIN(PIN_PA7, 1, 1)
+#define PIN_PA7__FLEXCOM2_IO2		PINMUX_PIN(PIN_PA7, 2, 3)
+#define PIN_PA7__D6			PINMUX_PIN(PIN_PA7, 3, 1)
+#define PIN_PA7__TIOA4			PINMUX_PIN(PIN_PA7, 6, 3)
+
+#define PIN_PA8				8
+#define PIN_PA8__GPIO			PINMUX_PIN(PIN_PA8, 0, 0)
+#define PIN_PA8__SDMMC0_DAT7		PINMUX_PIN(PIN_PA8, 1, 1)
+#define PIN_PA8__FLEXCOM2_IO3		PINMUX_PIN(PIN_PA8, 2, 3)
+#define PIN_PA8__D7			PINMUX_PIN(PIN_PA8, 3, 1)
+#define PIN_PA8__TIOA5			PINMUX_PIN(PIN_PA8, 6, 3)
+
+#define PIN_PA9				9
+#define PIN_PA9__GPIO			PINMUX_PIN(PIN_PA9, 0, 0)
+#define PIN_PA9__SDMMC0_DAT2		PINMUX_PIN(PIN_PA9, 1, 1)
+#define PIN_PA9__FLEXCOM0_IO2		PINMUX_PIN(PIN_PA9, 2, 1)
+#define PIN_PA9__D2			PINMUX_PIN(PIN_PA9, 3, 1)
+#define PIN_PA9__TIOB5			PINMUX_PIN(PIN_PA9, 6, 3)
+
+#define PIN_PA10			10
+#define PIN_PA10__GPIO			PINMUX_PIN(PIN_PA10, 0, 0)
+#define PIN_PA10__SDMMC0_DAT3		PINMUX_PIN(PIN_PA10, 1, 1)
+#define PIN_PA10__FLEXCOM0_IO3		PINMUX_PIN(PIN_PA10, 2, 1)
+#define PIN_PA10__D3			PINMUX_PIN(PIN_PA10, 3, 1)
+#define PIN_PA10__TCLK5			PINMUX_PIN(PIN_PA10, 6, 3)
+
+#define PIN_PA11			11
+#define PIN_PA11__GPIO			PINMUX_PIN(PIN_PA11, 0, 0)
+#define PIN_PA11__SDMMC0_DS		PINMUX_PIN(PIN_PA11, 1, 1)
+#define PIN_PA11__FLEXCOM0_IO4		PINMUX_PIN(PIN_PA11, 2, 1)
+#define PIN_PA11__NANDRDY		PINMUX_PIN(PIN_PA11, 3, 1)
+#define PIN_PA11__TIOB3			PINMUX_PIN(PIN_PA11, 6, 3)
+
+#define PIN_PA12			12
+#define PIN_PA12__GPIO			PINMUX_PIN(PIN_PA12, 0, 0)
+#define PIN_PA12__FLEXCOM0_IO0		PINMUX_PIN(PIN_PA12, 2, 1)
+#define PIN_PA12__NRD			PINMUX_PIN(PIN_PA12, 3, 1)
+#define PIN_PA12__PCK0			PINMUX_PIN(PIN_PA12, 4, 1)
+#define PIN_PA12__EXT_IRQ0		PINMUX_PIN(PIN_PA12, 5, 1)
+#define PIN_PA12__TIOA3			PINMUX_PIN(PIN_PA12, 6, 3)
+
+#define PIN_PA13			13
+#define PIN_PA13__GPIO			PINMUX_PIN(PIN_PA13, 0, 0)
+#define PIN_PA13__FLEXCOM0_IO1		PINMUX_PIN(PIN_PA13, 2, 1)
+#define PIN_PA13__NCS0			PINMUX_PIN(PIN_PA13, 3, 1)
+#define PIN_PA13__PCK1			PINMUX_PIN(PIN_PA13, 4, 1)
+#define PIN_PA13__TCLK3			PINMUX_PIN(PIN_PA13, 6, 3)
+
+#define PIN_PA14			14
+#define PIN_PA14__GPIO			PINMUX_PIN(PIN_PA14, 0, 0)
+#define PIN_PA14__FLEXCOM4_IO4		PINMUX_PIN(PIN_PA14, 1, 1)
+#define PIN_PA14__SDMMC0_WP		PINMUX_PIN(PIN_PA14, 2, 1)
+#define PIN_PA14__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA14, 3, 4)
+
+#define PIN_PA15			15
+#define PIN_PA15__GPIO			PINMUX_PIN(PIN_PA15, 0, 0)
+#define PIN_PA15__FLEXCOM4_IO3		PINMUX_PIN(PIN_PA15, 1, 1)
+#define PIN_PA15__SDMMC0_1V8SEL		PINMUX_PIN(PIN_PA15, 2, 1)
+#define PIN_PA15__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA15, 3, 4)
+
+#define PIN_PA16			16
+#define PIN_PA16__GPIO			PINMUX_PIN(PIN_PA16, 0, 0)
+#define PIN_PA16__FLEXCOM4_IO2		PINMUX_PIN(PIN_PA16, 1, 1)
+#define PIN_PA16__SDMMCo_CD		PINMUX_PIN(PIN_PA16, 2, 1)
+#define PIN_PA16__PCK2			PINMUX_PIN(PIN_PA16, 4, 1)
+#define PIN_PA16__EXT_IRQ1		PINMUX_PIN(PIN_PA16, 5, 1)
+
+#define PIN_PA17			17
+#define PIN_PA17__GPIO			PINMUX_PIN(PIN_PA17, 0, 0)
+#define PIN_PA17__FLEXCOM4_IO1		PINMUX_PIN(PIN_PA17, 1, 1)
+
+#define PIN_PA18			18
+#define PIN_PA18__GPIO			PINMUX_PIN(PIN_PA18, 0, 0)
+#define PIN_PA18__FLEXCOM4_IO0		PINMUX_PIN(PIN_PA18, 1, 1)
+
+#define PIN_PA19			19
+#define PIN_PA19__GPIO			PINMUX_PIN(PIN_PA19, 0, 0)
+#define PIN_PA19__TK0			PINMUX_PIN(PIN_PA19, 1, 1)
+#define PIN_PA19__FLEXCOM4_IO5		PINMUX_PIN(PIN_PA19, 3, 1)
+#define PIN_PA19__PWML0			PINMUX_PIN(PIN_PA19, 4, 3)
+
+#define PIN_PA20			20
+#define PIN_PA20__GPIO			PINMUX_PIN(PIN_PA20, 0, 0)
+#define PIN_PA20__TD0			PINMUX_PIN(PIN_PA20, 1, 1)
+#define PIN_PA20__FLEXCOM3_IO4		PINMUX_PIN(PIN_PA20, 2, 2)
+#define PIN_PA20__FLEXCOM4_IO6		PINMUX_PIN(PIN_PA20, 3, 1)
+#define PIN_PA20__PWMH0			PINMUX_PIN(PIN_PA20, 4, 3)
+
+#define PIN_PA21			21
+#define PIN_PA21__GPIO			PINMUX_PIN(PIN_PA21, 0, 0)
+#define PIN_PA21__TF0			PINMUX_PIN(PIN_PA21, 1, 1)
+#define PIN_PA21__FLEXCOM3_IO3		PINMUX_PIN(PIN_PA21, 2, 2)
+#define PIN_PA21__PWML1			PINMUX_PIN(PIN_PA21, 4, 3)
+
+#define PIN_PA22			22
+#define PIN_PA22__GPIO			PINMUX_PIN(PIN_PA22, 0, 0)
+#define PIN_PA22__RD0			PINMUX_PIN(PIN_PA22, 1, 1)
+#define PIN_PA22__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA22, 2, 2)
+#define PIN_PA22__PDMC0_DS1		PINMUX_PIN(PIN_PA22, 3, 1)
+#define PIN_PA22__PWMH1			PINMUX_PIN(PIN_PA22, 4, 3)
+
+#define PIN_PA23			23
+#define PIN_PA23__GPIO			PINMUX_PIN(PIN_PA23, 0, 0)
+#define PIN_PA23__RK0			PINMUX_PIN(PIN_PA23, 1, 1)
+#define PIN_PA23__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA23, 2, 2)
+#define PIN_PA23__PDMC0_CLK		PINMUX_PIN(PIN_PA23, 3, 1)
+#define PIN_PA23__PWML2			PINMUX_PIN(PIN_PA23, 4, 3)
+
+#define PIN_PA24			24
+#define PIN_PA24__GPIO			PINMUX_PIN(PIN_PA24, 0, 0)
+#define PIN_PA24__RF0			PINMUX_PIN(PIN_PA24, 1, 1)
+#define PIN_PA24__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA24, 2, 2)
+#define PIN_PA24__PDMC0_DS0		PINMUX_PIN(PIN_PA24, 3, 1)
+#define PIN_PA24__PWMH2			PINMUX_PIN(PIN_PA24, 4, 3)
+
+#define PIN_PA25			25
+#define PIN_PA25__GPIO			PINMUX_PIN(PIN_PA25, 0, 0)
+#define PIN_PA25__G0_TXCTL		PINMUX_PIN(PIN_PA25, 1, 1)
+#define PIN_PA25__FLEXCOM6_IO2		PINMUX_PIN(PIN_PA25, 2, 1)
+
+#define PIN_PA26			26
+#define PIN_PA26__GPIO			PINMUX_PIN(PIN_PA26, 0, 0)
+#define PIN_PA26__G0_TX0		PINMUX_PIN(PIN_PA26, 1, 1)
+#define PIN_PA26__FLEXCOM6_IO3		PINMUX_PIN(PIN_PA26, 2, 1)
+
+#define PIN_PA27			27
+#define PIN_PA27__GPIO			PINMUX_PIN(PIN_PA27, 0, 0)
+#define PIN_PA27__G0_TX1		PINMUX_PIN(PIN_PA27, 1, 1)
+#define PIN_PA27__FLEXCOM6_IO4		PINMUX_PIN(PIN_PA27, 2, 1)
+
+#define PIN_PA28			28
+#define PIN_PA28__GPIO			PINMUX_PIN(PIN_PA28, 0, 0)
+#define PIN_PA28__G0_RXCTL		PINMUX_PIN(PIN_PA28, 1, 1)
+#define PIN_PA28__FLEXCOM6_IO0		PINMUX_PIN(PIN_PA28, 2, 1)
+
+#define PIN_PA29			29
+#define PIN_PA29__GPIO			PINMUX_PIN(PIN_PA29, 0, 0)
+#define PIN_PA29__G0_RX0		PINMUX_PIN(PIN_PA29, 1, 1)
+#define PIN_PA29__FLEXCOM6_IO1		PINMUX_PIN(PIN_PA29, 2, 1)
+
+#define PIN_PA30			30
+#define PIN_PA30__GPIO			PINMUX_PIN(PIN_PA30, 0, 0)
+#define PIN_PA30__G0_RX1		PINMUX_PIN(PIN_PA30, 1, 1)
+#define PIN_PA30__FLEXCOM8_IO0		PINMUX_PIN(PIN_PA30, 2, 1)
+
+#define PIN_PA31			31
+#define PIN_PA31__GPIO			PINMUX_PIN(PIN_PA31, 0, 0)
+#define PIN_PA31__G0_MDC		PINMUX_PIN(PIN_PA31, 1, 1)
+#define PIN_PA31__FLEXCOM8_IO1		PINMUX_PIN(PIN_PA31, 2, 1)
+
+#define PIN_PB0				32
+#define PIN_PB0__GPIO			PINMUX_PIN(PIN_PB0, 0, 0)
+#define PIN_PB0__G0_MDIO		PINMUX_PIN(PIN_PB0, 1, 1)
+#define PIN_PB0__FLEXCOM8_IO3		PINMUX_PIN(PIN_PB0, 2, 2)
+
+#define PIN_PB1				33
+#define PIN_PB1__GPIO			PINMUX_PIN(PIN_PB1, 0, 0)
+#define PIN_PB1__G0_REFCK		PINMUX_PIN(PIN_PB1, 1, 2)
+#define PIN_PB1__FLEXCOM8_IO2		PINMUX_PIN(PIN_PB1, 2, 1)
+
+#define PIN_PB2				34
+#define PIN_PB2__GPIO			PINMUX_PIN(PIN_PB2, 0, 0)
+#define PIN_PB2__G0_RX2			PINMUX_PIN(PIN_PB2, 1, 1)
+#define PIN_PB2__FLEXCOM8_IO4		PINMUX_PIN(PIN_PB2, 2, 1)
+#define PIN_PB2__G0_RXER		PINMUX_PIN(PIN_PB2, 3, 2)
+#define PIN_PB2__RK0			PINMUX_PIN(PIN_PB2, 4, 2)
+
+#define PIN_PB3				35
+#define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
+#define PIN_PB3__G0_RXCK		PINMUX_PIN(PIN_PB3, 1, 1)
+#define PIN_PB3__FLEXCOM10_IO2		PINMUX_PIN(PIN_PB3, 2, 2)
+#define PIN_PB3__TK0			PINMUX_PIN(PIN_PB3, 4, 2)
+
+#define PIN_PB4				36
+#define PIN_PB4__GPIO			PINMUX_PIN(PIN_PB4, 0, 0)
+#define PIN_PB4__G0_TX2			PINMUX_PIN(PIN_PB4, 1, 1)
+#define PIN_PB4__FLEXCOM10_IO3		PINMUX_PIN(PIN_PB4, 2, 2)
+#define PIN_PB4__TF0			PINMUX_PIN(PIN_PB4, 4, 2)
+
+#define PIN_PB5				37
+#define PIN_PB5__GPIO			PINMUX_PIN(PIN_PB5, 0, 0)
+#define PIN_PB5__G0_TX3			PINMUX_PIN(PIN_PB5, 1, 1)
+#define PIN_PB5__FLEXCOM10_IO4		PINMUX_PIN(PIN_PB5, 2, 1)
+#define PIN_PB5__TD0			PINMUX_PIN(PIN_PB5, 4, 2)
+
+#define PIN_PB6				38
+#define PIN_PB6__GPIO			PINMUX_PIN(PIN_PB6, 0, 0)
+#define PIN_PB6__G0_RX3			PINMUX_PIN(PIN_PB6, 1, 1)
+#define PIN_PB6__FLEXCOM10_IO0		PINMUX_PIN(PIN_PB6, 2, 2)
+#define PIN_PB6__RD0			PINMUX_PIN(PIN_PB6, 4, 2)
+
+#define PIN_PB7				39
+#define PIN_PB7__GPIO			PINMUX_PIN(PIN_PB7, 0, 0)
+#define PIN_PB7__G0_TSUCOMP		PINMUX_PIN(PIN_PB7, 1, 1)
+#define PIN_PB7__FLEXCOM10_IO1		PINMUX_PIN(PIN_PB7, 2, 2)
+#define PIN_PB7__ADTRG			PINMUX_PIN(PIN_PB7, 3, 1)
+#define PIN_PB7__RF0			PINMUX_PIN(PIN_PB7, 4, 2)
+
+#define PIN_PB8				40
+#define PIN_PB8__GPIO			PINMUX_PIN(PIN_PB8, 0, 0)
+#define PIN_PB8__QSPI0_IO3		PINMUX_PIN(PIN_PB8, 1, 1)
+#define PIN_PB8__PCK3			PINMUX_PIN(PIN_PB8, 2, 1)
+#define PIN_PB8__FLEXCOM2_IO1		PINMUX_PIN(PIN_PB8, 4, 2)
+
+#define PIN_PB9				41
+#define PIN_PB9__GPIO			PINMUX_PIN(PIN_PB9, 0, 0)
+#define PIN_PB9__QSPI0_IO2		PINMUX_PIN(PIN_PB9, 1, 1)
+#define PIN_PB9__FLEXCOM2_IO0		PINMUX_PIN(PIN_PB9, 4, 2)
+#define PIN_PB9__PWMEXTRG0		PINMUX_PIN(PIN_PB9, 5, 1)
+
+#define PIN_PB10			42
+#define PIN_PB10__GPIO			PINMUX_PIN(PIN_PB10, 0, 0)
+#define PIN_PB10__QSPI0_IO1		PINMUX_PIN(PIN_PB10, 1, 1)
+#define PIN_PB10__FLEXCOM2_IO4		PINMUX_PIN(PIN_PB10, 4, 2)
+#define PIN_PB10__PWMEXTRG1		PINMUX_PIN(PIN_PB10, 5, 1)
+
+#define PIN_PB11			43
+#define PIN_PB11__GPIO			PINMUX_PIN(PIN_PB11, 0, 0)
+#define PIN_PB11__QSPI0_IO0		PINMUX_PIN(PIN_PB11, 1, 1)
+#define PIN_PB11__FLEXCOM2_IO5		PINMUX_PIN(PIN_PB11, 4, 2)
+#define PIN_PB11__PWML3			PINMUX_PIN(PIN_PB11, 5, 1)
+#define PIN_PB11__TIOB3			PINMUX_PIN(PIN_PB11, 6, 2)
+
+#define PIN_PB12			44
+#define PIN_PB12__GPIO			PINMUX_PIN(PIN_PB12, 0, 0)
+#define PIN_PB12__QSPI0_CS		PINMUX_PIN(PIN_PB12, 1, 1)
+#define PIN_PB12__FLEXCOM2_IO3		PINMUX_PIN(PIN_PB12, 4, 2)
+#define PIN_PB12__PWMFI1		PINMUX_PIN(PIN_PB12, 6, 1)
+#define PIN_PB12__TIOA3			PINMUX_PIN(PIN_PB12, 6, 2)
+
+#define PIN_PB13			45
+#define PIN_PB13__GPIO			PINMUX_PIN(PIN_PB13, 0, 0)
+#define PIN_PB13__QSPI0_SCK		PINMUX_PIN(PIN_PB13, 1, 1)
+#define PIN_PB13__FLEXCOM2_IO2		PINMUX_PIN(PIN_PB13, 4, 2)
+#define PIN_PB13__PWMFI0		PINMUX_PIN(PIN_PB13, 5, 1)
+#define PIN_PB13__TCLK3			PINMUX_PIN(PIN_PB13, 6, 2)
+
+#define PIN_PB14			46
+#define PIN_PB14__GPIO			PINMUX_PIN(PIN_PB14, 0, 0)
+#define PIN_PB14__QSPI0_SCKN		PINMUX_PIN(PIN_PB14, 1, 1)
+#define PIN_PB14__QSPI1_SCK		PINMUX_PIN(PIN_PB14, 2, 1)
+#define PIN_PB14__I2SMCC0_CK		PINMUX_PIN(PIN_PB14, 3, 3)
+#define PIN_PB14__FLEXCOM10_IO5		PINMUX_PIN(PIN_PB14, 4, 1)
+#define PIN_PB14__PWMH3			PINMUX_PIN(PIN_PB14, 5, 1)
+#define PIN_PB14__FLEXCOM2_IO1		PINMUX_PIN(PIN_PB14, 7, 4)
+
+#define PIN_PB15			47
+#define PIN_PB15__GPIO			PINMUX_PIN(PIN_PB15, 0, 0)
+#define PIN_PB15__QSPI0_IO4		PINMUX_PIN(PIN_PB15, 1, 1)
+#define PIN_PB15__QSPI1_IO0		PINMUX_PIN(PIN_PB15, 2, 1)
+#define PIN_PB15__I2SMCC0_WS		PINMUX_PIN(PIN_PB15, 3, 3)
+#define PIN_PB15__FLEXCOM10_IO6		PINMUX_PIN(PIN_PB15, 4, 1)
+#define PIN_PB15__PWML0			PINMUX_PIN(PIN_PB15, 5, 1)
+#define PIN_PB15__TCLK4			PINMUX_PIN(PIN_PB15, 6, 2)
+#define PIN_PB15__FLEXCOM2_IO0		PINMUX_PIN(PIN_PB15, 7, 4)
+
+#define PIN_PB16			48
+#define PIN_PB16__GPIO			PINMUX_PIN(PIN_PB16, 0, 0)
+#define PIN_PB16__QSPI0_IO5		PINMUX_PIN(PIN_PB16, 1, 1)
+#define PIN_PB16__QSPI1_IO1		PINMUX_PIN(PIN_PB16, 2, 1)
+#define PIN_PB16__I2SMCC0_DIN0		PINMUX_PIN(PIN_PB16, 3, 3)
+#define PIN_PB16__FLEXCOM10_IO4		PINMUX_PIN(PIN_PB16, 4, 1)
+#define PIN_PB16__PWMH0			PINMUX_PIN(PIN_PB16, 5, 1)
+#define PIN_PB16__TIOB4			PINMUX_PIN(PIN_PB16, 6, 2)
+
+#define PIN_PB17			49
+#define PIN_PB17__GPIO			PINMUX_PIN(PIN_PB17, 0, 0)
+#define PIN_PB17__QSPI0_IO6		PINMUX_PIN(PIN_PB17, 1, 1)
+#define PIN_PB17__QSPI1_IO2		PINMUX_PIN(PIN_PB17, 2, 1)
+#define PIN_PB17__I2SMCC0_DOUT0		PINMUX_PIN(PIN_PB17, 3, 3)
+#define PIN_PB17__FLEXCOM10_IO3		PINMUX_PIN(PIN_PB17, 4, 1)
+#define PIN_PB17__PWML1			PINMUX_PIN(PIN_PB17, 5, 1)
+#define PIN_PB17__TIOA4			PINMUX_PIN(PIN_PB17, 6, 2)
+
+#define PIN_PB18			50
+#define PIN_PB18__GPIO			PINMUX_PIN(PIN_PB18, 0, 0)
+#define PIN_PB18__QSPI0_IO7		PINMUX_PIN(PIN_PB18, 1, 1)
+#define PIN_PB18__QSPI1_IO3		PINMUX_PIN(PIN_PB18, 2, 1)
+#define PIN_PB18__I2SMCC0_MCK		PINMUX_PIN(PIN_PB18, 3, 3)
+#define PIN_PB18__FLEXCOM10_IO2		PINMUX_PIN(PIN_PB18, 4, 1)
+#define PIN_PB18__PWMH1			PINMUX_PIN(PIN_PB18, 5, 1)
+#define PIN_PB18__TIOA5			PINMUX_PIN(PIN_PB18, 6, 2)
+
+#define PIN_PB19			51
+#define PIN_PB19__GPIO			PINMUX_PIN(PIN_PB19, 0, 0)
+#define PIN_PB19__QSPI0_DQS		PINMUX_PIN(PIN_PB19, 1, 1)
+#define PIN_PB19__EXT_IRQ1		PINMUX_PIN(PIN_PB19, 2, 2)
+#define PIN_PB19__PCK4			PINMUX_PIN(PIN_PB19, 3, 1)
+#define PIN_PB19__FLEXCOM10_IO1		PINMUX_PIN(PIN_PB19, 4, 1)
+#define PIN_PB19__PWML2			PINMUX_PIN(PIN_PB19, 5, 1)
+#define PIN_PB19__TIOB5			PINMUX_PIN(PIN_PB19, 6, 2)
+
+#define PIN_PB20			52
+#define PIN_PB20__GPIO			PINMUX_PIN(PIN_PB20, 0, 0)
+#define PIN_PB20__QSPI0_INT		PINMUX_PIN(PIN_PB20, 1, 1)
+#define PIN_PB20__QSPI1_CS		PINMUX_PIN(PIN_PB20, 2, 1)
+#define PIN_PB20__FLEXCOM10_IO0		PINMUX_PIN(PIN_PB20, 4, 1)
+#define PIN_PB20__PWMH2			PINMUX_PIN(PIN_PB20, 5, 1)
+#define PIN_PB20__TCLK5			PINMUX_PIN(PIN_PB20, 6, 2)
+
+#define PIN_PB21			53
+#define PIN_PB21__GPIO			PINMUX_PIN(PIN_PB21, 0, 0)
+#define PIN_PB21__SDMMC1_RSTN		PINMUX_PIN(PIN_PB21, 1, 1)
+#define PIN_PB21__FLEXCOM6_IO4		PINMUX_PIN(PIN_PB21, 2, 2)
+#define PIN_PB21__TIOB2			PINMUX_PIN(PIN_PB21, 3, 2)
+#define PIN_PB21__ADTRG			PINMUX_PIN(PIN_PB21, 4, 2)
+#define PIN_PB21__EXT_IRQ0		PINMUX_PIN(PIN_PB21, 5, 2)
+
+#define PIN_PB22			54
+#define PIN_PB22__GPIO			PINMUX_PIN(PIN_PB22, 0, 0)
+#define PIN_PB22__SDMMC1_CMD		PINMUX_PIN(PIN_PB22, 1, 1)
+#define PIN_PB22__FLEXCOM6_IO3		PINMUX_PIN(PIN_PB22, 2, 2)
+#define PIN_PB22__TCLK2			PINMUX_PIN(PIN_PB22, 3, 2)
+
+#define PIN_PB23			55
+#define PIN_PB23__GPIO			PINMUX_PIN(PIN_PB23, 0, 0)
+#define PIN_PB23__SDMMC1_CK		PINMUX_PIN(PIN_PB23, 1, 1)
+#define PIN_PB23__FLEXCOM6_IO2		PINMUX_PIN(PIN_PB23, 2, 2)
+#define PIN_PB23__TIOA2			PINMUX_PIN(PIN_PB23, 3, 2)
+
+#define PIN_PB24			56
+#define PIN_PB24__GPIO			PINMUX_PIN(PIN_PB24, 0, 0)
+#define PIN_PB24__SDMMC1_DAT0		PINMUX_PIN(PIN_PB24, 1, 1)
+#define PIN_PB24__FLEXCOM6_IO0		PINMUX_PIN(PIN_PB24, 2, 2)
+
+#define PIN_PB25			57
+#define PIN_PB25__GPIO			PINMUX_PIN(PIN_PB25, 0, 0)
+#define PIN_PB25__SDMMC1_DAT1		PINMUX_PIN(PIN_PB25, 1, 1)
+#define PIN_PB25__FLEXCOM6_IO1		PINMUX_PIN(PIN_PB25, 2, 2)
+#define PIN_PB25__TIOB2			PINMUX_PIN(PIN_PB25, 3, 1)
+
+#define PIN_PB26			58
+#define PIN_PB26__GPIO			PINMUX_PIN(PIN_PB26, 0, 0)
+#define PIN_PB26__SDMMC1_DAT2		PINMUX_PIN(PIN_PB26, 1, 1)
+#define PIN_PB26__FLEXCOM8_IO0		PINMUX_PIN(PIN_PB26, 2, 3)
+#define PIN_PB26__TCLK2			PINMUX_PIN(PIN_PB26, 3, 1)
+
+#define PIN_PB27			59
+#define PIN_PB27__GPIO			PINMUX_PIN(PIN_PB27, 0, 0)
+#define PIN_PB27__SDMMC1_DAT3		PINMUX_PIN(PIN_PB27, 1, 1)
+#define PIN_PB27__FLEXCOM8_IO1		PINMUX_PIN(PIN_PB27, 2, 3)
+#define PIN_PB27__TIOA2			PINMUX_PIN(PIN_PB27, 3, 1)
+
+#define PIN_PB28			60
+#define PIN_PB28__GPIO			PINMUX_PIN(PIN_PB28, 0, 0)
+#define PIN_PB28__SDMMC1_WP		PINMUX_PIN(PIN_PB28, 1, 1)
+#define PIN_PB28__FLEXCOM1_IO0		PINMUX_PIN(PIN_PB28, 3, 3)
+#define PIN_PB28__D15			PINMUX_PIN(PIN_PB28, 5, 1)
+
+#define PIN_PB29			61
+#define PIN_PB29__GPIO			PINMUX_PIN(PIN_PB29, 0, 0)
+#define PIN_PB29__SDMMC1_CD		PINMUX_PIN(PIN_PB29, 1, 1)
+#define PIN_PB29__I2SMCC0_MCK		PINMUX_PIN(PIN_PB29, 2, 1)
+#define PIN_PB29__FLEXCOM1_IO1		PINMUX_PIN(PIN_PB29, 3, 3)
+#define PIN_PB29__D14			PINMUX_PIN(PIN_PB29, 5, 2)
+
+#define PIN_PB30			62
+#define PIN_PB30__GPIO			PINMUX_PIN(PIN_PB30, 0, 0)
+#define PIN_PB30__SDMMC1_1V8SEL		PINMUX_PIN(PIN_PB30, 1, 1)
+#define PIN_PB30__I2SMCC1_MCK		PINMUX_PIN(PIN_PB30, 2, 2)
+#define PIN_PB30__FLEXCOM1_IO2		PINMUX_PIN(PIN_PB30, 3, 3)
+#define PIN_PB30__TIOA1			PINMUX_PIN(PIN_PB30, 4, 1)
+#define PIN_PB30__NCS1			PINMUX_PIN(PIN_PB30, 5, 1)
+
+#define PIN_PB31			63
+#define PIN_PB31__GPIO			PINMUX_PIN(PIN_PB31, 0, 0)
+#define PIN_PB31__PCK7			PINMUX_PIN(PIN_PB31, 1, 2)
+#define PIN_PB31__I2SMCC1_DIN1		PINMUX_PIN(PIN_PB31, 2, 1)
+#define PIN_PB31__FLEXCOM1_IO3		PINMUX_PIN(PIN_PB31, 3, 3)
+#define PIN_PB31__TCLK1			PINMUX_PIN(PIN_PB31, 4, 1)
+#define PIN_PB31__NWE			PINMUX_PIN(PIN_PB31, 5, 2)
+
+#define PIN_PC0				64
+#define PIN_PC0__GPIO			PINMUX_PIN(PIN_PC0, 0, 0)
+#define PIN_PC0__PCK6			PINMUX_PIN(PIN_PC0, 1, 2)
+#define PIN_PC0__I2SMCC1_DIN2		PINMUX_PIN(PIN_PC0, 2, 1)
+#define PIN_PC0__FLEXCOM9_IO4		PINMUX_PIN(PIN_PC0, 3, 2)
+#define PIN_PC0__TIOB1			PINMUX_PIN(PIN_PC0, 4, 1)
+#define PIN_PC0__NWR1			PINMUX_PIN(PIN_PC0, 5, 1)
+
+#define PIN_PC1				65
+#define PIN_PC1__GPIO			PINMUX_PIN(PIN_PC1, 0, 0)
+#define PIN_PC1__PCK5			PINMUX_PIN(PIN_PC1, 1, 1)
+#define PIN_PC1__FLEXCOM9_IO2		PINMUX_PIN(PIN_PC1, 3, 2)
+#define PIN_PC1__SMCK			PINMUX_PIN(PIN_PC1, 5, 1)
+
+#define PIN_PC2				66
+#define PIN_PC2__GPIO			PINMUX_PIN(PIN_PC2, 0, 0)
+#define PIN_PC2__EXT_IRQ0		PINMUX_PIN(PIN_PC2, 1, 3)
+#define PIN_PC2__FLEXCOM9_IO3		PINMUX_PIN(PIN_PC2, 3, 2)
+#define PIN_PC2__A11			PINMUX_PIN(PIN_PC2, 5, 1)
+
+#define PIN_PC3				67
+#define PIN_PC3__GPIO			PINMUX_PIN(PIN_PC3, 0, 0)
+#define PIN_PC3__SPDIF_RX		PINMUX_PIN(PIN_PC3, 1, 2)
+#define PIN_PC3__FLEXCOM9_IO0		PINMUX_PIN(PIN_PC3, 3, 2)
+#define PIN_PC3__FLEXCOM0_IO4		PINMUX_PIN(PIN_PC3, 4, 2)
+#define PIN_PC3__A10			PINMUX_PIN(PIN_PC3, 5, 1)
+
+#define PIN_PC4				68
+#define PIN_PC4__GPIO			PINMUX_PIN(PIN_PC4, 0, 0)
+#define PIN_PC4__SPDIF_TX		PINMUX_PIN(PIN_PC4, 1, 2)
+#define PIN_PC4__FLEXCOM9_IO1		PINMUX_PIN(PIN_PC4, 3, 2)
+#define PIN_PC4__FLEXCOM0_IO3		PINMUX_PIN(PIN_PC4, 4, 2)
+#define PIN_PC4__D0			PINMUX_PIN(PIN_PC4, 5, 2)
+
+#define PIN_PC5				69
+#define PIN_PC5__GPIO			PINMUX_PIN(PIN_PC5, 0, 0)
+#define PIN_PC5__I3CC_SDASPUE		PINMUX_PIN(PIN_PC5, 1, 1)
+#define PIN_PC5__I2SMCC1_DIN3		PINMUX_PIN(PIN_PC5, 2, 1)
+#define PIN_PC5__FLEXCOM0_IO2		PINMUX_PIN(PIN_PC5, 4, 2)
+#define PIN_PC5__D1			PINMUX_PIN(PIN_PC5, 5, 2)
+
+#define PIN_PC6				70
+#define PIN_PC6__GPIO			PINMUX_PIN(PIN_PC6, 0, 0)
+#define PIN_PC6__I3CC_SCL		PINMUX_PIN(PIN_PC6, 1, 1)
+#define PIN_PC6__FLEXCOM0_IO1		PINMUX_PIN(PIN_PC6, 4, 2)
+#define PIN_PC6__D4			PINMUX_PIN(PIN_PC6, 5, 2)
+
+#define PIN_PC7				71
+#define PIN_PC7__GPIO			PINMUX_PIN(PIN_PC7, 0, 0)
+#define PIN_PC7__I3CC_SDA		PINMUX_PIN(PIN_PC7, 1, 1)
+#define PIN_PC7__FLEXCOM0_IO0		PINMUX_PIN(PIN_PC7, 4, 2)
+#define PIN_PC7__D5			PINMUX_PIN(PIN_PC7, 5, 2)
+
+#define PIN_PC8				72
+#define PIN_PC8__GPIO			PINMUX_PIN(PIN_PC8, 0, 0)
+#define PIN_PC8__I2SMCC0_DIN1		PINMUX_PIN(PIN_PC8, 1, 1)
+#define PIN_PC8__PDMC0_DS1		PINMUX_PIN(PIN_PC8, 2, 2)
+#define PIN_PC8__I2SMCC1_DOUT1		PINMUX_PIN(PIN_PC8, 3, 1)
+#define PIN_PC8__FLEXCOM9_IO0		PINMUX_PIN(PIN_PC8, 4, 1)
+#define PIN_PC8__D6			PINMUX_PIN(PIN_PC8, 5, 2)
+
+#define PIN_PC9				73
+#define PIN_PC9__GPIO			PINMUX_PIN(PIN_PC9, 0, 0)
+#define PIN_PC9__I2SMCC0_DIN2		PINMUX_PIN(PIN_PC9, 1, 1)
+#define PIN_PC9__PDMC0_CLK		PINMUX_PIN(PIN_PC9, 2, 2)
+#define PIN_PC9__I2SMCC1_DOUT2		PINMUX_PIN(PIN_PC9, 3, 1)
+#define PIN_PC9__FLEXCOM9_IO1		PINMUX_PIN(PIN_PC9, 4, 1)
+#define PIN_PC9__D7			PINMUX_PIN(PIN_PC9, 5, 2)
+
+#define PIN_PC10			74
+#define PIN_PC10__GPIO			PINMUX_PIN(PIN_PC10, 0, 0)
+#define PIN_PC10__I2SMCC0_DIN3		PINMUX_PIN(PIN_PC10, 1, 1)
+#define PIN_PC10__PDMC0_DS0		PINMUX_PIN(PIN_PC10, 2, 2)
+#define PIN_PC10__I2SMCC1_DOUT3		PINMUX_PIN(PIN_PC10, 3, 1)
+#define PIN_PC10__FLEXCOM9_IO2		PINMUX_PIN(PIN_PC10, 4, 1)
+#define PIN_PC10__D2			PINMUX_PIN(PIN_PC10, 5, 2)
+
+#define PIN_PC11			75
+#define PIN_PC11__GPIO			PINMUX_PIN(PIN_PC11, 0, 0)
+#define PIN_PC11__I2SMCC0_DOUT1		PINMUX_PIN(PIN_PC11, 1, 1)
+#define PIN_PC11__PDMC1_DS0		PINMUX_PIN(PIN_PC11, 2, 1)
+#define PIN_PC11__FLEXCOM9_IO3		PINMUX_PIN(PIN_PC11, 4, 1)
+#define PIN_PC10__D3			PINMUX_PIN(PIN_PC10, 5, 2)
+
+#define PIN_PC12			76
+#define PIN_PC12__GPIO			PINMUX_PIN(PIN_PC12, 0, 0)
+#define PIN_PC12__I2SMCC0_DOUT2		PINMUX_PIN(PIN_PC12, 1, 1)
+#define PIN_PC12__PDMC1_CLK		PINMUX_PIN(PIN_PC12, 2, 1)
+#define PIN_PC12__FLEXCOM9_IO4		PINMUX_PIN(PIN_PC12, 4, 1)
+#define PIN_PC12__A9			PINMUX_PIN(PIN_PC12, 5, 1)
+
+#define PIN_PC13			77
+#define PIN_PC13__GPIO			PINMUX_PIN(PIN_PC13, 0, 0)
+#define PIN_PC13__I2SMCC0_DOUT3		PINMUX_PIN(PIN_PC13, 1, 1)
+#define PIN_PC13__PDMC1_DS1		PINMUX_PIN(PIN_PC13, 2, 1)
+#define PIN_PC13__A8			PINMUX_PIN(PIN_PC13, 5, 1)
+
+#define PIN_PC14			78
+#define PIN_PC14__GPIO			PINMUX_PIN(PIN_PC14, 0, 0)
+#define PIN_PC14__I2SMCC1_DIN0		PINMUX_PIN(PIN_PC14, 1, 1)
+#define PIN_PC14__SPDIF_RX		PINMUX_PIN(PIN_PC14, 2, 3)
+#define PIN_PC14__FLEXCOM1_IO0		PINMUX_PIN(PIN_PC14, 3, 2)
+#define PIN_PC14__A7			PINMUX_PIN(PIN_PC14, 5, 1)
+
+#define PIN_PC15			79
+#define PIN_PC15__GPIO			PINMUX_PIN(PIN_PC15, 0, 0)
+#define PIN_PC15__I2SMCC1_WS		PINMUX_PIN(PIN_PC15, 1, 1)
+#define PIN_PC15__PDMC1_DS1		PINMUX_PIN(PIN_PC15, 2, 2)
+#define PIN_PC15__FLEXCOM1_IO1		PINMUX_PIN(PIN_PC15, 3, 2)
+#define PIN_PC15__A6			PINMUX_PIN(PIN_PC15, 5, 1)
+
+#define PIN_PC16			80
+#define PIN_PC16__GPIO			PINMUX_PIN(PIN_PC16, 0, 0)
+#define PIN_PC16__I2SMCC1_CK		PINMUX_PIN(PIN_PC16, 1, 1)
+#define PIN_PC16__PDMC1_CLK		PINMUX_PIN(PIN_PC16, 2, 2)
+#define PIN_PC16__FLEXCOM1_IO2		PINMUX_PIN(PIN_PC16, 3, 2)
+#define PIN_PC16__TIOA1			PINMUX_PIN(PIN_PC16, 4, 2)
+#define PIN_PC16__A5			PINMUX_PIN(PIN_PC16, 5, 1)
+
+#define PIN_PC17			81
+#define PIN_PC17__GPIO			PINMUX_PIN(PIN_PC17, 0, 0)
+#define PIN_PC17__I2SMCC1_DOUT0		PINMUX_PIN(PIN_PC17, 1, 1)
+#define PIN_PC17__PDMC1_DS0		PINMUX_PIN(PIN_PC17, 2, 2)
+#define PIN_PC17__FLEXCOM1_IO3		PINMUX_PIN(PIN_PC17, 3, 2)
+#define PIN_PC17__TCLK1			PINMUX_PIN(PIN_PC17, 4, 2)
+#define PIN_PC17__A4			PINMUX_PIN(PIN_PC17, 5, 1)
+
+#define PIN_PC18			82
+#define PIN_PC18__GPIO			PINMUX_PIN(PIN_PC18, 0, 0)
+#define PIN_PC18__I2SMCC0_DIN0		PINMUX_PIN(PIN_PC18, 1, 1)
+#define PIN_PC18__SPDIF_TX		PINMUX_PIN(PIN_PC18, 2, 3)
+#define PIN_PC18__FLEXCOM1_IO4		PINMUX_PIN(PIN_PC18, 3, 2)
+#define PIN_PC18__TIOB1			PINMUX_PIN(PIN_PC18, 4, 2)
+#define PIN_PC18__A3			PINMUX_PIN(PIN_PC18, 5, 1)
+
+#define PIN_PC19			83
+#define PIN_PC19__GPIO			PINMUX_PIN(PIN_PC19, 0, 0)
+#define PIN_PC19__I2SMCC0_WS		PINMUX_PIN(PIN_PC19, 1, 1)
+#define PIN_PC19__PCK6			PINMUX_PIN(PIN_PC19, 2, 1)
+#define PIN_PC19__A2			PINMUX_PIN(PIN_PC19, 5, 1)
+
+#define PIN_PC20			84
+#define PIN_PC20__GPIO			PINMUX_PIN(PIN_PC20, 0, 0)
+#define PIN_PC20__I2SMCC0_DOUT0		PINMUX_PIN(PIN_PC20, 1, 1)
+#define PIN_PC20__A1			PINMUX_PIN(PIN_PC20, 5, 1)
+
+#define PIN_PC21			85
+#define PIN_PC21__GPIO			PINMUX_PIN(PIN_PC21, 0, 0)
+#define PIN_PC21__I2SMCC0_CK		PINMUX_PIN(PIN_PC21, 1, 1)
+#define PIN_PC21__PCK7			PINMUX_PIN(PIN_PC21, 2, 1)
+#define PIN_PC21__A0			PINMUX_PIN(PIN_PC21, 5, 1)
+
+#define PIN_PC22			86
+#define PIN_PC22__GPIO			PINMUX_PIN(PIN_PC22, 0, 0)
+#define PIN_PC22__NTRST			PINMUX_PIN(PIN_PC22, 1, 1)
+#define PIN_PC22__NWAIT			PINMUX_PIN(PIN_PC22, 5, 1)
+
+#define PIN_PC23			87
+#define PIN_PC23__GPIO			PINMUX_PIN(PIN_PC23, 0, 0)
+#define PIN_PC23__TCK_SWCLK		PINMUX_PIN(PIN_PC23, 1, 1)
+
+#define PIN_PC24			88
+#define PIN_PC24__GPIO			PINMUX_PIN(PIN_PC24, 0, 0)
+#define PIN_PC24__TMS_SWDIO		PINMUX_PIN(PIN_PC24, 1, 1)
+
+#define PIN_PC25			89
+#define PIN_PC25__GPIO			PINMUX_PIN(PIN_PC25, 0, 0)
+#define PIN_PC25__TDI			PINMUX_PIN(PIN_PC25, 1, 1)
+
+#define PIN_PC26			90
+#define PIN_PC26__GPIO			PINMUX_PIN(PIN_PC26, 0, 0)
+#define PIN_PC26__TDO			PINMUX_PIN(PIN_PC26, 1, 1)
+#define PIN_PC26__A15			PINMUX_PIN(PIN_PC26, 5, 1)
+
+#define PIN_PC27			91
+#define PIN_PC27__GPIO			PINMUX_PIN(PIN_PC27, 0, 0)
+#define PIN_PC27__SDMMC2_CMD		PINMUX_PIN(PIN_PC27, 1, 1)
+#define PIN_PC27__FLEXCOM8_IO0		PINMUX_PIN(PIN_PC27, 2, 2)
+#define PIN_PC27__TD1			PINMUX_PIN(PIN_PC27, 4, 2)
+#define PIN_PC27__D8			PINMUX_PIN(PIN_PC27, 5, 1)
+
+#define PIN_PC28			92
+#define PIN_PC28__GPIO			PINMUX_PIN(PIN_PC28, 0, 0)
+#define PIN_PC28__SDMMC2_CK		PINMUX_PIN(PIN_PC28, 1, 1)
+#define PIN_PC28__FLEXCOM8_IO1		PINMUX_PIN(PIN_PC28, 2, 2)
+#define PIN_PC28__TF1			PINMUX_PIN(PIN_PC28, 4, 2)
+#define PIN_PC28__D9			PINMUX_PIN(PIN_PC28, 5, 1)
+
+#define PIN_PC29			93
+#define PIN_PC29__GPIO			PINMUX_PIN(PIN_PC29, 0, 0)
+#define PIN_PC29__SDMMC2_DAT0		PINMUX_PIN(PIN_PC29, 1, 1)
+#define PIN_PC29__FLEXCOM8_IO2		PINMUX_PIN(PIN_PC29, 2, 2)
+#define PIN_PC29__TK1			PINMUX_PIN(PIN_PC29, 4, 2)
+#define PIN_PC29__D10			PINMUX_PIN(PIN_PC29, 5, 1)
+#define PIN_PC29__TCLK0			PINMUX_PIN(PIN_PC29, 6, 1)
+
+#define PIN_PC30			94
+#define PIN_PC30__GPIO			PINMUX_PIN(PIN_PC30, 0, 0)
+#define PIN_PC30__SDMMC2_DAT1		PINMUX_PIN(PIN_PC30, 1, 1)
+#define PIN_PC30__FLEXCOM8_IO3		PINMUX_PIN(PIN_PC30, 2, 2)
+#define PIN_PC30__RD1			PINMUX_PIN(PIN_PC30, 4, 2)
+#define PIN_PC30__D11			PINMUX_PIN(PIN_PC30, 5, 1)
+#define PIN_PC30__TIOA0			PINMUX_PIN(PIN_PC30, 6, 1)
+
+#define PIN_PC31			95
+#define PIN_PC31__GPIO			PINMUX_PIN(PIN_PC31, 0, 0)
+#define PIN_PC31__SDMMC2_DAT2		PINMUX_PIN(PIN_PC31, 1, 1)
+#define PIN_PC31__FLEXCOM8_IO4		PINMUX_PIN(PIN_PC31, 2, 2)
+#define PIN_PC31__PCK0			PINMUX_PIN(PIN_PC31, 3, 2)
+#define PIN_PC31__RK1			PINMUX_PIN(PIN_PC31, 4, 2)
+#define PIN_PC31__D12			PINMUX_PIN(PIN_PC31, 5, 1)
+#define PIN_PC31__TIOB0			PINMUX_PIN(PIN_PC31, 6, 1)
+
+#define PIN_PD0				96
+#define PIN_PD0__GPIO			PINMUX_PIN(PIN_PD0, 0, 0)
+#define PIN_PD0__SDMMC2_DAT3		PINMUX_PIN(PIN_PD0, 1, 1)
+#define PIN_PD0__PCK1			PINMUX_PIN(PIN_PD0, 3, 2)
+#define PIN_PD0__RF1			PINMUX_PIN(PIN_PD0, 4, 2)
+#define PIN_PD0__D13			PINMUX_PIN(PIN_PD0, 5, 1)
+
+#define PIN_PD1				97
+#define PIN_PD1__GPIO			PINMUX_PIN(PIN_PD1, 0, 0)
+#define PIN_PD1__SDMMC2_WP		PINMUX_PIN(PIN_PD1, 1, 1)
+#define PIN_PD1__FLEXCOM1_IO5		PINMUX_PIN(PIN_PD1, 2, 1)
+#define PIN_PD1__LCDC_HSYNC		PINMUX_PIN(PIN_PD1, 3, 2)
+#define PIN_PD1__FLEXCOM3_IO0		PINMUX_PIN(PIN_PD1, 4, 3)
+
+#define PIN_PD2				98
+#define PIN_PD2__GPIO			PINMUX_PIN(PIN_PD2, 0, 0)
+#define PIN_PD2__SDMMC2_CD		PINMUX_PIN(PIN_PD2, 1, 1)
+#define PIN_PD2__FLEXCOM1_IO6		PINMUX_PIN(PIN_PD2, 2, 1)
+#define PIN_PD2__LCDC_VSYNC		PINMUX_PIN(PIN_PD2, 3, 2)
+#define PIN_PD2__FLEXCOM3_IO1		PINMUX_PIN(PIN_PD2, 4, 3)
+
+#define PIN_PD3				99
+#define PIN_PD3__GPIO			PINMUX_PIN(PIN_PD3, 0, 0)
+#define PIN_PD3__SDMMC2_1V8SEL		PINMUX_PIN(PIN_PD3, 1, 1)
+#define PIN_PD3__FLEXCOM1_IO4		PINMUX_PIN(PIN_PD3, 2, 1)
+#define PIN_PD3__TIOA0			PINMUX_PIN(PIN_PD3, 3, 2)
+#define PIN_PD3__FLEXCOM3_IO2		PINMUX_PIN(PIN_PD3, 4, 3)
+#define PIN_PD3__EXT_IRQ1		PINMUX_PIN(PIN_PD3, 5, 3)
+
+#define PIN_PD4				100
+#define PIN_PD4__GPIO			PINMUX_PIN(PIN_PD4, 0, 0)
+#define PIN_PD4__LCDC_HSYNC		PINMUX_PIN(PIN_PD4, 1, 1)
+#define PIN_PD4__FLEXCOM1_IO2		PINMUX_PIN(PIN_PD4, 2, 1)
+#define PIN_PD4__TIOB0			PINMUX_PIN(PIN_PD4, 3, 2)
+#define PIN_PD4__FLEXCOM7_IO1		PINMUX_PIN(PIN_PD4, 4, 3)
+
+#define PIN_PD5				101
+#define PIN_PD5__GPIO			PINMUX_PIN(PIN_PD5, 0, 0)
+#define PIN_PD5__LCDC_VSYNC		PINMUX_PIN(PIN_PD5, 1, 1)
+#define PIN_PD5__FLEXCOM1_IO3		PINMUX_PIN(PIN_PD5, 2, 1)
+#define PIN_PD5__TCLK0			PINMUX_PIN(PIN_PD5, 3, 2)
+#define PIN_PD5__FLEXCOM7_IO0		PINMUX_PIN(PIN_PD5, 4, 3)
+
+#define PIN_PD6				102
+#define PIN_PD6__GPIO			PINMUX_PIN(PIN_PD6, 0, 0)
+#define PIN_PD6__LCDC_PWM		PINMUX_PIN(PIN_PD6, 1, 1)
+#define PIN_PD6__FLEXCOM1_IO1		PINMUX_PIN(PIN_PD6, 2, 1)
+#define PIN_PD6__FLEXCOM7_IO2		PINMUX_PIN(PIN_PD6, 4, 3)
+
+#define PIN_PD7				103
+#define PIN_PD7__GPIO			PINMUX_PIN(PIN_PD7, 0, 0)
+#define PIN_PD7__LCDC_DISP		PINMUX_PIN(PIN_PD7, 1, 1)
+#define PIN_PD7__FLEXCOM1_IO0		PINMUX_PIN(PIN_PD7, 2, 1)
+#define PIN_PD7__FLEXCOM7_IO3		PINMUX_PIN(PIN_PD7, 4, 3)
+
+#define PIN_PD8				104
+#define PIN_PD8__GPIO			PINMUX_PIN(PIN_PD8, 0, 0)
+#define PIN_PD8__CANTX0			PINMUX_PIN(PIN_PD8, 1, 1)
+#define PIN_PD8__FLEXCOM7_IO0		PINMUX_PIN(PIN_PD8, 2, 1)
+
+#define PIN_PD9				105
+#define PIN_PD9__GPIO			PINMUX_PIN(PIN_PD9, 0, 0)
+#define PIN_PD9__CANRX0			PINMUX_PIN(PIN_PD9, 1, 1)
+#define PIN_PD9__FLEXCOM7_IO1		PINMUX_PIN(PIN_PD9, 2, 1)
+
+#define PIN_PD10			106
+#define PIN_PD10__GPIO			PINMUX_PIN(PIN_PD10, 0, 0)
+#define PIN_PD10__CANTX1		PINMUX_PIN(PIN_PD10, 1, 1)
+#define PIN_PD10__FLEXCOM7_IO2		PINMUX_PIN(PIN_PD10, 2, 1)
+#define PIN_PD10__TIOA1			PINMUX_PIN(PIN_PD10, 3, 3)
+
+#define PIN_PD11			107
+#define PIN_PD11__GPIO			PINMUX_PIN(PIN_PD11, 0, 0)
+#define PIN_PD11__CANRX1		PINMUX_PIN(PIN_PD11, 1, 1)
+#define PIN_PD11__FLEXCOM7_IO3		PINMUX_PIN(PIN_PD11, 2, 1)
+#define PIN_PD11__TCLK1			PINMUX_PIN(PIN_PD11, 3, 3)
+
+#define PIN_PD12			108
+#define PIN_PD12__GPIO			PINMUX_PIN(PIN_PD12, 0, 0)
+#define PIN_PD12__CANTX2		PINMUX_PIN(PIN_PD12, 1, 1)
+#define PIN_PD12__FLEXCOM7_IO4		PINMUX_PIN(PIN_PD12, 2, 1)
+#define PIN_PD12__TIOB1			PINMUX_PIN(PIN_PD12, 3, 3)
+#define PIN_PD12__PCK2			PINMUX_PIN(PIN_PD12, 4, 2)
+#define PIN_PD12__FLEXCOM3_IO3		PINMUX_PIN(PIN_PD12, 5, 3)
+
+#define PIN_PD13			109
+#define PIN_PD13__GPIO			PINMUX_PIN(PIN_PD13, 0, 0)
+#define PIN_PD13__CANRX2		PINMUX_PIN(PIN_PD13, 1, 1)
+#define PIN_PD13__FLEXCOM5_IO4		PINMUX_PIN(PIN_PD13, 2, 1)
+#define PIN_PD13__TIOA2			PINMUX_PIN(PIN_PD13, 3, 3)
+#define PIN_PD13__PCK3			PINMUX_PIN(PIN_PD13, 4, 2)
+
+#define PIN_PD14			110
+#define PIN_PD14__GPIO			PINMUX_PIN(PIN_PD14, 0, 0)
+#define PIN_PD14__CANTX3		PINMUX_PIN(PIN_PD14, 1, 1)
+#define PIN_PD14__FLEXCOM5_IO2		PINMUX_PIN(PIN_PD14, 2, 1)
+#define PIN_PD14__TIOB2			PINMUX_PIN(PIN_PD14, 3, 3)
+
+#define PIN_PD15			111
+#define PIN_PD15__GPIO			PINMUX_PIN(PIN_PD15, 0, 0)
+#define PIN_PD15__CANRX3		PINMUX_PIN(PIN_PD15, 1, 1)
+#define PIN_PD15__FLEXCOM5_IO3		PINMUX_PIN(PIN_PD15, 2, 1)
+#define PIN_PD15__TCLK2			PINMUX_PIN(PIN_PD15, 3, 3)
+
+#define PIN_PD16			112
+#define PIN_PD16__GPIO			PINMUX_PIN(PIN_PD16, 0, 0)
+#define PIN_PD16__CANTX4		PINMUX_PIN(PIN_PD16, 1, 1)
+#define PIN_PD16__FLEXCOM5_IO0		PINMUX_PIN(PIN_PD16, 2, 1)
+
+#define PIN_PD17			113
+#define PIN_PD17__GPIO			PINMUX_PIN(PIN_PD17, 0, 0)
+#define PIN_PD17__CANRX4		PINMUX_PIN(PIN_PD17, 1, 1)
+#define PIN_PD17__FLEXCOM5_IO1		PINMUX_PIN(PIN_PD17, 2, 1)
+
+#define PIN_PD18			114
+#define PIN_PD18__GPIO			PINMUX_PIN(PIN_PD18, 0, 0)
+#define PIN_PD18__FLEXCOM6_IO0		PINMUX_PIN(PIN_PD18, 2, 4)
+#define PIN_PD18__CANTX1		PINMUX_PIN(PIN_PD18, 3, 2)
+#define PIN_PD18__PCK4			PINMUX_PIN(PIN_PD18, 4, 2)
+
+#define PIN_PD19			115
+#define PIN_PD19__GPIO			PINMUX_PIN(PIN_PD19, 0, 0)
+#define PIN_PD19__FLEXCOM6_IO1		PINMUX_PIN(PIN_PD19, 2, 4)
+#define PIN_PD19__CANRX1		PINMUX_PIN(PIN_PD19, 3, 2)
+#define PIN_PD19__PCK2			PINMUX_PIN(PIN_PD19, 4, 3)
+
+#define PIN_PD20			116
+#define PIN_PD20__GPIO			PINMUX_PIN(PIN_PD20, 0, 0)
+#define PIN_PD20__PFLEXCOM6_IO2		PINMUX_PIN(PIN_PD20, 2, 4)
+#define PIN_PD20__I2SMCC1_MCK		PINMUX_PIN(PIN_PD20, 3, 2)
+#define PIN_PD20__PCK3			PINMUX_PIN(PIN_PD20, 4, 3)
+
+#define PIN_PD21			117
+#define PIN_PD21__GPIO			PINMUX_PIN(PIN_PD21, 0, 0)
+#define PIN_PD21__G1_TXCTL		PINMUX_PIN(PIN_PD21, 1, 2)
+#define PIN_PD21__FLEXCOM6_IO2		PINMUX_PIN(PIN_PD21, 2, 3)
+#define PIN_PD21__TK1			PINMUX_PIN(PIN_PD21, 3, 1)
+
+#define PIN_PD22			118
+#define PIN_PD22__GPIO			PINMUX_PIN(PIN_PD22, 0, 0)
+#define PIN_PD22__G1_TX0		PINMUX_PIN(PIN_PD22, 1, 1)
+#define PIN_PD22__FLEXCOM6_IO3		PINMUX_PIN(PIN_PD22, 2, 3)
+#define PIN_PD22__TF1			PINMUX_PIN(PIN_PD22, 3, 1)
+
+#define PIN_PD23			119
+#define PIN_PD23__GPIO			PINMUX_PIN(PIN_PD23, 0, 0)
+#define PIN_PD23__G1_TX1		PINMUX_PIN(PIN_PD23, 1, 1)
+#define PIN_PD23__FLEXCOM6_IO4		PINMUX_PIN(PIN_PD23, 2, 3)
+#define PIN_PD23__TD1			PINMUX_PIN(PIN_PD23, 3, 1)
+
+#define PIN_PD24			120
+#define PIN_PD24__GPIO			PINMUX_PIN(PIN_PD24, 0, 0)
+#define PIN_PD24__G1_RXCTL		PINMUX_PIN(PIN_PD24, 1, 1)
+#define PIN_PD24__FLEXCOM6_IO0		PINMUX_PIN(PIN_PD24, 2, 3)
+#define PIN_PD24__RD1			PINMUX_PIN(PIN_PD24, 3, 1)
+#define PIN_PD24__PDMC0_DS1		PINMUX_PIN(PIN_PD24, 5, 3)
+
+#define PIN_PD25			121
+#define PIN_PD25__GPIO			PINMUX_PIN(PIN_PD25, 0, 0)
+#define PIN_PD25__G1_MDC		PINMUX_PIN(PIN_PD25, 1, 1)
+#define PIN_PD25__FLEXCOM6_IO1		PINMUX_PIN(PIN_PD25, 2, 3)
+#define PIN_PD25__RK1			PINMUX_PIN(PIN_PD25, 3, 1)
+#define PIN_PD25__PDMC0_CLK		PINMUX_PIN(PIN_PD25, 5, 3)
+
+#define PIN_PD26			122
+#define PIN_PD26__GPIO			PINMUX_PIN(PIN_PD26, 0, 0)
+#define PIN_PD26__G1_MDIO		PINMUX_PIN(PIN_PD26, 1, 1)
+#define PIN_PD26__FLEXCOM7_IO4		PINMUX_PIN(PIN_PD26, 2, 2)
+#define PIN_PD26__RF1			PINMUX_PIN(PIN_PD26, 3, 1)
+#define PIN_PD26__I2SMCC1_DIN2		PINMUX_PIN(PIN_PD26, 4, 2)
+#define PIN_PD26__PDMC0_DS0		PINMUX_PIN(PIN_PD26, 5, 3)
+
+#define PIN_PD27			123
+#define PIN_PD27__GPIO			PINMUX_PIN(PIN_PD27, 0, 0)
+#define PIN_PD27__G1_RX0		PINMUX_PIN(PIN_PD27, 1, 1)
+#define PIN_PD27__FLEXCOM7_IO0		PINMUX_PIN(PIN_PD27, 2, 2)
+#define PIN_PD27__SPDIF_RX		PINMUX_PIN(PIN_PD27, 3, 1)
+#define PIN_PD27__I2SMCC1_DIN3		PINMUX_PIN(PIN_PD27, 4, 2)
+
+#define PIN_PD28			124
+#define PIN_PD28__GPIO			PINMUX_PIN(PIN_PD28, 0, 0)
+#define PIN_PD28__G1_RX1		PINMUX_PIN(PIN_PD28, 1, 1)
+#define PIN_PD28__FLEXCOM7_IO1		PINMUX_PIN(PIN_PD28, 2, 2)
+#define PIN_PD28__SPDIF_TX		PINMUX_PIN(PIN_PD28, 3, 1)
+#define PIN_PD28__I2SMCC1_DIN1		PINMUX_PIN(PIN_PD28, 4, 2)
+
+#define PIN_PD29			125
+#define PIN_PD29__GPIO			PINMUX_PIN(PIN_PD29, 0, 0)
+#define PIN_PD29__G1_REFCK		PINMUX_PIN(PIN_PD29, 1, 2)
+#define PIN_PD29__FLEXCOM7_IO2		PINMUX_PIN(PIN_PD29, 2, 2)
+#define PIN_PD29__I2SMCC1_DOUT3		PINMUX_PIN(PIN_PD29, 3, 2)
+
+#define PIN_PD30			126
+#define PIN_PD30__GPIO			PINMUX_PIN(PIN_PD30, 0, 0)
+#define PIN_PD30__G1_RX2		PINMUX_PIN(PIN_PD30, 1, 1)
+#define PIN_PD30__FLEXCOM7_IO3		PINMUX_PIN(PIN_PD30, 2, 2)
+#define PIN_PD30__I2SMCC1_DOUT1		PINMUX_PIN(PIN_PD30, 3, 2)
+#define PIN_PD30__PDMC1_DS1		PINMUX_PIN(PIN_PD30, 4, 3)
+#define PIN_PD30__G1_RXER		PINMUX_PIN(PIN_PD30, 5, 2)
+
+#define PIN_PD31			127
+#define PIN_PD31__GPIO			PINMUX_PIN(PIN_PD31, 0, 0)
+#define PIN_PD31__G1_RX3		PINMUX_PIN(PIN_PD31, 1, 1)
+#define PIN_PD31__FLEXCOM5_IO4		PINMUX_PIN(PIN_PD31, 2, 2)
+#define PIN_PD31__I2SMCC1_DOUT2		PINMUX_PIN(PIN_PD31, 3, 3)
+#define PIN_PD31__PDMC1_DS0		PINMUX_PIN(PIN_PD31, 4, 3)
+
+#define PIN_PE0				128
+#define PIN_PE0__GPIO			PINMUX_PIN(PIN_PE0, 0, 0)
+#define PIN_PE0__G1_TX2			PINMUX_PIN(PIN_PE0, 1, 1)
+#define PIN_PE0__FLEXCOM5_IO2		PINMUX_PIN(PIN_PE0, 2, 2)
+#define PIN_PE0__I2SMCC1_DIN0		PINMUX_PIN(PIN_PE0, 3, 2)
+#define PIN_PE0__PDMC1_CLK		PINMUX_PIN(PIN_PE0, 4, 3)
+
+#define PIN_PE1				129
+#define PIN_PE1__GPIO			PINMUX_PIN(PIN_PE1, 0, 0)
+#define PIN_PE1__G1_TX3			PINMUX_PIN(PIN_PE1, 1, 1)
+#define PIN_PE1__FLEXCOM5_IO3		PINMUX_PIN(PIN_PE1, 2, 2)
+#define PIN_PE1__I2SMCC1_WS		PINMUX_PIN(PIN_PE1, 3, 2)
+#define PIN_PE1__PDMC0_DS1		PINMUX_PIN(PIN_PE1, 4, 4)
+
+#define PIN_PE2				130
+#define PIN_PE2__GPIO			PINMUX_PIN(PIN_PE2, 0, 0)
+#define PIN_PE2__G1_RXCK		PINMUX_PIN(PIN_PE2, 1, 1)
+#define PIN_PE2__FLEXCOM5_IO1		PINMUX_PIN(PIN_PE2, 2, 2)
+#define PIN_PE2__I2SMCC1_CK		PINMUX_PIN(PIN_PE2, 3, 2)
+#define PIN_PE2__PDMC0_CLK		PINMUX_PIN(PIN_PE2, 4, 4)
+
+#define PIN_PE3				131
+#define PIN_PE3__GPIO			PINMUX_PIN(PIN_PE3, 0, 0)
+#define PIN_PE3__G1_TSUCOMP		PINMUX_PIN(PIN_PE3, 1, 1)
+#define PIN_PE3__FLEXCOM5_IO0		PINMUX_PIN(PIN_PE3, 2, 2)
+#define PIN_PE3__I2SMCC1_DOUT0		PINMUX_PIN(PIN_PE3, 3, 2)
+#define PIN_PE3__PDMC0_DS0		PINMUX_PIN(PIN_PE3, 4, 4)
+
+#define PIN_PE4				132
+#define PIN_PE4__GPIO			PINMUX_PIN(PIN_PE4, 0, 0)
+#define PIN_PE4__LCDC_DAT0		PINMUX_PIN(PIN_PE4, 1, 1)
+#define PIN_PE4__FLEXCOM2_IO2		PINMUX_PIN(PIN_PE4, 2, 1)
+#define PIN_PE4__PWML0			PINMUX_PIN(PIN_PE4, 3, 2)
+#define PIN_PE4__TIOA3			PINMUX_PIN(PIN_PE4, 4, 1)
+#define PIN_PE4__I2SMCC0_DIN1		PINMUX_PIN(PIN_PE4, 5, 2)
+
+#define PIN_PE5				133
+#define PIN_PE5__GPIO			PINMUX_PIN(PIN_PE5, 0, 0)
+#define PIN_PE5__LCDC_DAT1		PINMUX_PIN(PIN_PE5, 1, 1)
+#define PIN_PE5__FLEXCOM2_IO3		PINMUX_PIN(PIN_PE5, 2, 1)
+#define PIN_PE5__PWMH0			PINMUX_PIN(PIN_PE5, 3, 2)
+#define PIN_PE5__TIOB3			PINMUX_PIN(PIN_PE5, 4, 1)
+#define PIN_PE5__I2SMCC0_DIN2		PINMUX_PIN(PIN_PE5, 5, 2)
+
+#define PIN_PE6				134
+#define PIN_PE6__GPIO			PINMUX_PIN(PIN_PE6, 0, 0)
+#define PIN_PE6__LCDC_DAT2		PINMUX_PIN(PIN_PE6, 1, 1)
+#define PIN_PE6__FLEXCOM2_IO4		PINMUX_PIN(PIN_PE6, 2, 1)
+#define PIN_PE6__PWML1			PINMUX_PIN(PIN_PE6, 3, 2)
+#define PIN_PE6__TCLK3			PINMUX_PIN(PIN_PE6, 4, 1)
+#define PIN_PE6__I2SMCC0_DIN3		PINMUX_PIN(PIN_PE6, 5, 2)
+
+#define PIN_PE7				135
+#define PIN_PE7__GPIO			PINMUX_PIN(PIN_PE7, 0, 0)
+#define PIN_PE7__LCDC_DAT3		PINMUX_PIN(PIN_PE7, 1, 1)
+#define PIN_PE7__FLEXCOM2_IO5		PINMUX_PIN(PIN_PE7, 2, 1)
+#define PIN_PE7__PWMH1			PINMUX_PIN(PIN_PE7, 3, 2)
+#define PIN_PE7__TIOA4			PINMUX_PIN(PIN_PE7, 4, 1)
+#define PIN_PE7__I2SMCC0_DOUT1		PINMUX_PIN(PIN_PE7, 5, 2)
+
+#define PIN_PE8				136
+#define PIN_PE8__GPIO			PINMUX_PIN(PIN_PE8, 0, 0)
+#define PIN_PE8__LCDC_DAT4		PINMUX_PIN(PIN_PE8, 1, 1)
+#define PIN_PE8__FLEXCOM2_IO0		PINMUX_PIN(PIN_PE8, 2, 1)
+#define PIN_PE8__PWML2			PINMUX_PIN(PIN_PE8, 3, 2)
+#define PIN_PE8__TIOB4			PINMUX_PIN(PIN_PE8, 4, 1)
+#define PIN_PE8__I2SMCC0_CK		PINMUX_PIN(PIN_PE8, 5, 2)
+
+#define PIN_PE9				137
+#define PIN_PE9__GPIO			PINMUX_PIN(PIN_PE9, 0, 0)
+#define PIN_PE9__LCDC_DAT5		PINMUX_PIN(PIN_PE9, 1, 1)
+#define PIN_PE9__FLEXCOM2_IO1		PINMUX_PIN(PIN_PE9, 2, 1)
+#define PIN_PE9__PWMH2			PINMUX_PIN(PIN_PE9, 3, 2)
+#define PIN_PE9__TCLK4			PINMUX_PIN(PIN_PE9, 4, 1)
+#define PIN_PE9__I2SMCC0_WS		PINMUX_PIN(PIN_PE9, 5, 2)
+
+#define PIN_PE10			138
+#define PIN_PE10__GPIO			PINMUX_PIN(PIN_PE10, 0, 0)
+#define PIN_PE10__LCDC_DAT6		PINMUX_PIN(PIN_PE10, 1, 1)
+#define PIN_PE10__FLEXCOM2_IO6		PINMUX_PIN(PIN_PE10, 2, 1)
+#define PIN_PE10__PWML3			PINMUX_PIN(PIN_PE10, 3, 2)
+#define PIN_PE10__TIOA5			PINMUX_PIN(PIN_PE10, 4, 1)
+#define PIN_PE10__I2SMCC0_DOUT2		PINMUX_PIN(PIN_PE10, 5, 2)
+
+#define PIN_PE11			139
+#define PIN_PE11__GPIO			PINMUX_PIN(PIN_PE11, 0, 0)
+#define PIN_PE11__LCDC_DAT7		PINMUX_PIN(PIN_PE11, 1, 1)
+#define PIN_PE11__PWMH3			PINMUX_PIN(PIN_PE11, 3, 2)
+#define PIN_PE11__TIOB5			PINMUX_PIN(PIN_PE11, 4, 1)
+#define PIN_PE11__I2SMCC0_DOUT3		PINMUX_PIN(PIN_PE11, 5, 2)
+
+#define PIN_PE12			140
+#define PIN_PE12__GPIO			PINMUX_PIN(PIN_PE12, 0, 0)
+#define PIN_PE12__LCDC_DEN		PINMUX_PIN(PIN_PE12, 1, 1)
+#define PIN_PE12__PCK3			PINMUX_PIN(PIN_PE12, 2, 4)
+#define PIN_PE12__PWMEXTRG0		PINMUX_PIN(PIN_PE12, 3, 2)
+#define PIN_PE12__TCLK5			PINMUX_PIN(PIN_PE12, 4, 1)
+#define PIN_PE12__I2SMCC0_DIN0		PINMUX_PIN(PIN_PE12, 5, 2)
+
+#define PIN_PE13			141
+#define PIN_PE13__GPIO			PINMUX_PIN(PIN_PE13, 0, 0)
+#define PIN_PE13__LCDC_PCK		PINMUX_PIN(PIN_PE13, 1, 1)
+#define PIN_PE13__PCK4			PINMUX_PIN(PIN_PE13, 2, 3)
+#define PIN_PE13__PWMEXTRG1		PINMUX_PIN(PIN_PE13, 3, 2)
+#define PIN_PE13__I2SMCC0DOUT0		PINMUX_PIN(PIN_PE13, 5, 2)
diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi
new file mode 100644
index 000000000000..cd2cf9a6f40b
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi
@@ -0,0 +1,740 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *  sama7d65.dtsi - Device Tree Include file for SAMA7D65 SoC
+ *
+ *  Copyright (C) 2024 Microchip Technology Inc. and its subsidiaries
+ *
+ *  Author: Ryan Wanner <Ryan.Wanner@microchip.com>
+ *
+ */
+
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	model = "Microchip SAMA7D65 family SoC";
+	compatible = "microchip,sama7d65";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			device_type = "cpu";
+			clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>;
+			clock-names = "cpu";
+			d-cache-size = <0x8000>;	// L1, 32 KB
+			i-cache-size = <0x8000>;	// L1, 32 KB
+			next-level-cache = <&L2>;
+
+			L2: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x40000>; // L2, 256 KB
+				cache-unified;
+			};
+		};
+	};
+
+	clocks {
+		main_xtal: clock-mainxtal {
+			compatible = "fixed-clock";
+			clock-output-names = "main_xtal";
+			#clock-cells = <0>;
+		};
+
+		slow_xtal: clock-slowxtal {
+			compatible = "fixed-clock";
+			clock-output-names = "slow_xtal";
+			#clock-cells = <0>;
+		};
+	};
+
+	ns_sram: sram@100000 {
+		compatible = "mmio-sram";
+		reg = <0x100000 0x20000>;
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		securam: sram@e0000800 {
+			compatible = "microchip,sama7d65-securam", "atmel,sama5d2-securam", "mmio-sram";
+			reg = <0xe0000800 0x4000>;
+			ranges = <0 0xe0000800 0x4000>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			no-memory-wc;
+		};
+
+		secumod: security-module@e0004000 {
+			compatible = "microchip,sama7d65-secumod", "atmel,sama5d2-secumod", "syscon";
+			reg = <0xe0004000 0x4000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		sfrbu: sfr@e0008000 {
+			compatible = "microchip,sama7d65-sfrbu", "atmel,sama5d2-sfrbu", "syscon";
+			reg = <0xe0008000 0x20>;
+		};
+
+		pioa: pinctrl@e0014000 {
+			compatible = "microchip,sama7d65-pinctrl", "microchip,sama7g5-pinctrl";
+			reg = <0xe0014000 0x800>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		pmc: clock-controller@e0018000 {
+			compatible = "microchip,sama7d65-pmc", "syscon";
+			reg = <0xe0018000 0x200>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#clock-cells = <2>;
+			clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+			clock-names = "td_slck", "md_slck", "main_xtal";
+		};
+
+		ps_wdt: watchdog@e001d000 {
+			compatible = "microchip,sama7d65-wdt", "microchip,sama7g5-wdt";
+			reg = <0xe001d000 0x30>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 0>;
+		};
+
+		reset_controller: reset-controller@e001d100 {
+			compatible = "microchip,sama7d65-rstc", "microchip,sama7g5-rstc";
+			reg = <0xe001d100 0xc>, <0xe001d1e4 0x4>;
+			#reset-cells = <1>;
+			clocks = <&clk32k 0>;
+		};
+
+		shdwc: poweroff@e001d200 {
+			compatible = "microchip,sama7d65-shdwc", "microchip,sama7g5-shdwc", "syscon";
+			reg = <0xe001d200 0x20>;
+			clocks = <&clk32k 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			atmel,wakeup-rtc-timer;
+			atmel,wakeup-rtt-timer;
+			status = "disabled";
+		};
+
+		rtt: rtc@e001d300 {
+			compatible = "microchip,sama7d65-rtt", "atmel,at91sam9260-rtt";
+			reg = <0xe001d300 0x30>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 0>;
+		};
+
+		clk32k: clock-controller@e001d500 {
+			compatible = "microchip,sama7d65-sckc", "microchip,sam9x60-sckc";
+			reg = <0xe001d500 0x4>;
+			clocks = <&slow_xtal>;
+			#clock-cells = <1>;
+		};
+
+		gpbr: syscon@e001d700 {
+			compatible = "microchip,sama7d65-gpbr", "syscon";
+			reg = <0xe001d700 0x48>;
+		};
+
+		rtc: rtc@e001d800 {
+			compatible = "microchip,sama7d65-rtc", "microchip,sam9x60-rtc";
+			reg = <0xe001d800 0x30>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 1>;
+		};
+
+		chipid@e0020000 {
+			compatible = "microchip,sama7d65-chipid";
+			reg = <0xe0020000 0x8>;
+		};
+
+		can0: can@e0828000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0828000 0x200>, <0x100000 0x7800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 58>;
+			assigned-clock-rates = <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can1: can@e082c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe082c000 0x200>, <0x100000 0xbc00>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 59>, <&pmc PMC_TYPE_GCK 59>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 59>;
+			assigned-clock-rates = <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can2: can@e0830000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0830000 0x200>, <0x100000 0x10000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 60>, <&pmc PMC_TYPE_GCK 60>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 60>;
+			assigned-clock-rates = <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0xbc00 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can3: can@e0834000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0834000 0x200>, <0x110000 0x4400>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 61>, <&pmc PMC_TYPE_GCK 61>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 61>;
+			assigned-clock-rates = <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can4: can@e0838000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0838000 0x200>, <0x110000 0x8800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 62>, <&pmc PMC_TYPE_GCK 62>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 62>;
+			assigned-clock-rates = <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0x4400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		dma2: dma-controller@e1200000 {
+			compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma";
+			reg = <0xe1200000 0x1000>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+			clock-names = "dma_clk";
+			dma-requests = <0>;
+			status = "disabled";
+		};
+
+		sdmmc1: mmc@e1208000 {
+			compatible = "microchip,sama7d65-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe1208000 0x400>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 76>, <&pmc PMC_TYPE_GCK 76>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 76>;
+			assigned-clock-rates = <200000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_MCK1>;
+			status = "disabled";
+		};
+
+		aes: crypto@e1600000 {
+			compatible = "microchip,sama7d65-aes", "atmel,at91sam9g46-aes";
+			reg = <0xe1600000 0x100>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
+			clock-names = "aes_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+			dma-names = "tx", "rx";
+		};
+
+		sha: crypto@e1604000 {
+			compatible = "microchip,sama7d65-sha", "atmel,at91sam9g46-sha";
+			reg = <0xe1604000 0x100>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 78>;
+			clock-names = "sha_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
+			dma-names = "tx";
+		};
+
+		tdes: crypto@e1608000 {
+			compatible = "microchip,sama7d65-tdes", "atmel,at91sam9g46-tdes";
+			reg = <0xe1608000 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 91>;
+			clock-names = "tdes_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(53)>;
+			dma-names = "tx", "rx";
+		};
+
+		trng: rng@e160c000 {
+			compatible = "microchip,sama7d65-trng", "microchip,sam9x60-trng";
+			reg = <0xe160c000 0x100>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 92>;
+		};
+
+		dma0: dma-controller@e1610000 {
+			compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma";
+			reg = <0xe1610000 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		dma1: dma-controller@e1614000 {
+			compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma";
+			reg = <0xe1614000 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		gmac0: ethernet@e1618000 {
+			compatible = "microchip,sama7d65-gem", "microchip,sama7g5-gem";
+			reg = <0xe1618000 0x2000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_GCK 46>, <&pmc PMC_TYPE_GCK 49>;
+			clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 46>, <&pmc PMC_TYPE_GCK 49>;
+			assigned-clock-rates = <125000000>, <200000000>;
+			status = "disabled";
+		};
+
+		gmac1: ethernet@e161c000 {
+			compatible = "microchip,sama7d65-gem", "microchip,sama7g5-gem";
+			reg = <0xe161c000 0x2000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>, <&pmc PMC_TYPE_PERIPHERAL 47>,<&pmc PMC_TYPE_GCK 47>, <&pmc PMC_TYPE_GCK 50>;
+			clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 47>, <&pmc PMC_TYPE_GCK 50>;
+			assigned-clock-rates = <125000000>, <200000000>;
+			status = "disabled";
+		};
+
+		pit64b0: timer@e1800000 {
+			compatible = "microchip,sama7d65-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xe1800000 0x100>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 66>, <&pmc PMC_TYPE_GCK 66>;
+			clock-names = "pclk", "gclk";
+		};
+
+		pit64b1: timer@e1804000 {
+			compatible = "microchip,sama7d65-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xe1804000 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 67>, <&pmc PMC_TYPE_GCK 67>;
+			clock-names = "pclk", "gclk";
+		};
+
+		pwm: pwm@e1818000 {
+			compatible = "microchip,sama7d65-pwm", "atmel,sama5d2-pwm";
+			reg = <0xe1818000 0x500>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 72>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		flx0: flexcom@e1820000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe1820000 0x200>;
+			ranges = <0x0 0xe1820000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			uart0: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(5)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(6)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(5)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx1: flexcom@e1824000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe1824000 0x200>;
+			ranges = <0x0 0xe1824000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			spi1: spi@400 {
+				compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(7)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(7)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx2: flexcom@e1828000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe1828000 0x200>;
+			ranges = <0x0 0xe1828000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 36>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			uart2: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(10)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(9)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+		};
+
+		flx3: flexcom@e182c000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe182c000 0x200>;
+			ranges = <0x0 0xe182c000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			uart3: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+				clock-names = "usart";
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(11)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(11)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+		};
+
+		flx4: flexcom@e2018000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2018000 0x200>;
+			ranges = <0x0 0xe2018000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			uart4: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(13)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <32>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi4: spi@400 {
+				compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(14)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(13)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx5: flexcom@e201c000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe201c000 0x200>;
+			ranges = <0x0 0xe201c000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			i2c5: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(16)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(15)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx6: flexcom@e2020000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2020000 0x200>;
+			ranges = <0x0 0xe2020000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+			status = "disabled";
+
+			uart6: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+				clock-names = "usart";
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx7: flexcom@e2024000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2024000 0x200>;
+			ranges = <0x0 0xe2024000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			uart7: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(19)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <32>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+		};
+
+		flx8: flexcom@e281c000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe281c000 0x200>;
+			ranges = <0x0 0xe281c000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			i2c8: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(21)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx9: flexcom@e2820000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2820000 0x200>;
+			ranges = <0x0 0xe281c000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			i2c9: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(23)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx10: flexcom@e2824000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2824000 0x200>;
+			ranges = <0x0 0xe2824000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			i2c10: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		uddrc: uddrc@e3800000 {
+			compatible = "microchip,sama7d65-uddrc", "microchip,sama7g5-uddrc";
+			reg = <0xe3800000 0x4000>;
+		};
+
+		ddr3phy: ddr3phy@e3804000 {
+			compatible = "microchip,sama7d65-ddr3phy", "microchip,sama7g5-ddr3phy";
+			reg = <0xe3804000 0x1000>;
+		};
+
+		gic: interrupt-controller@e8c11000 {
+			compatible = "arm,cortex-a7-gic";
+			reg = <0xe8c11000 0x1000>,
+			      <0xe8c12000 0x2000>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sama7g5-pinfunc.h b/arch/arm/boot/dts/microchip/sama7g5-pinfunc.h
new file mode 100644
index 000000000000..a67a156e26ab
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama7g5-pinfunc.h
@@ -0,0 +1,923 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+#define PINMUX_PIN(no, func, ioset) \
+(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20))
+
+#define PIN_PA0				0
+#define PIN_PA0__GPIO			PINMUX_PIN(PIN_PA0, 0, 0)
+#define PIN_PA0__SDMMC0_CK		PINMUX_PIN(PIN_PA0, 1, 1)
+#define PIN_PA0__FLEXCOM0_IO0		PINMUX_PIN(PIN_PA0, 2, 1)
+#define PIN_PA0__CANTX3			PINMUX_PIN(PIN_PA0, 3, 1)
+#define PIN_PA0__PWML0			PINMUX_PIN(PIN_PA0, 5, 2)
+#define PIN_PA1				1
+#define PIN_PA1__GPIO			PINMUX_PIN(PIN_PA1, 0, 0)
+#define PIN_PA1__SDMMC0_CMD		PINMUX_PIN(PIN_PA1, 1, 1)
+#define PIN_PA1__FLEXCOM0_IO1		PINMUX_PIN(PIN_PA1, 2, 1)
+#define PIN_PA1__CANRX3			PINMUX_PIN(PIN_PA1, 3, 1)
+#define PIN_PA1__D14			PINMUX_PIN(PIN_PA1, 4, 1)
+#define PIN_PA1__PWMH0			PINMUX_PIN(PIN_PA1, 5, 3)
+#define PIN_PA2				2
+#define PIN_PA2__GPIO			PINMUX_PIN(PIN_PA2, 0, 0)
+#define PIN_PA2__SDMMC0_RSTN		PINMUX_PIN(PIN_PA2, 1, 1)
+#define PIN_PA2__FLEXCOM0_IO2		PINMUX_PIN(PIN_PA2, 2, 1)
+#define PIN_PA2__PDMC1_CLK		PINMUX_PIN(PIN_PA2, 3, 1)
+#define PIN_PA2__D15			PINMUX_PIN(PIN_PA2, 4, 1)
+#define PIN_PA2__PWMH1			PINMUX_PIN(PIN_PA2, 5, 3)
+#define PIN_PA2__FLEXCOM1_IO0		PINMUX_PIN(PIN_PA2, 6, 3)
+#define PIN_PA3				3
+#define PIN_PA3__GPIO			PINMUX_PIN(PIN_PA3, 0, 0)
+#define PIN_PA3__SDMMC0_DAT0		PINMUX_PIN(PIN_PA3, 1, 1)
+#define PIN_PA3__FLEXCOM0_IO3		PINMUX_PIN(PIN_PA3, 2, 1)
+#define PIN_PA3__PDMC1_DS0		PINMUX_PIN(PIN_PA3, 3, 1)
+#define PIN_PA3__NWR1_NBS1		PINMUX_PIN(PIN_PA3, 4, 1)
+#define PIN_PA3__PWML3			PINMUX_PIN(PIN_PA3, 5, 3)
+#define PIN_PA3__FLEXCOM1_IO1		PINMUX_PIN(PIN_PA3, 6, 3)
+#define PIN_PA4				4
+#define PIN_PA4__GPIO			PINMUX_PIN(PIN_PA4, 0, 0)
+#define PIN_PA4__SDMMC0_DAT1		PINMUX_PIN(PIN_PA4, 1, 1)
+#define PIN_PA4__FLEXCOM0_IO4		PINMUX_PIN(PIN_PA4, 2, 1)
+#define PIN_PA4__PDMC1_DS1		PINMUX_PIN(PIN_PA4, 3, 1)
+#define PIN_PA4__NCS2			PINMUX_PIN(PIN_PA4, 4, 1)
+#define PIN_PA4__PWMH3			PINMUX_PIN(PIN_PA4, 5, 3)
+#define PIN_PA4__FLEXCOM2_IO0		PINMUX_PIN(PIN_PA4, 6, 3)
+#define PIN_PA5				5
+#define PIN_PA5__GPIO			PINMUX_PIN(PIN_PA5, 0, 0)
+#define PIN_PA5__SDMMC0_DAT2		PINMUX_PIN(PIN_PA5, 1, 1)
+#define PIN_PA5__FLEXCOM1_IO0		PINMUX_PIN(PIN_PA5, 2, 1)
+#define PIN_PA5__CANTX2			PINMUX_PIN(PIN_PA5, 3, 1)
+#define PIN_PA5__A23			PINMUX_PIN(PIN_PA5, 4, 1)
+#define PIN_PA5__PWMEXTRG0		PINMUX_PIN(PIN_PA5, 5, 3)
+#define PIN_PA5__FLEXCOM2_IO1		PINMUX_PIN(PIN_PA5, 6, 3)
+#define PIN_PA6				6
+#define PIN_PA6__GPIO			PINMUX_PIN(PIN_PA6, 0, 0)
+#define PIN_PA6__SDMMC0_DAT3		PINMUX_PIN(PIN_PA6, 1, 1)
+#define PIN_PA6__FLEXCOM1_IO1		PINMUX_PIN(PIN_PA6, 2, 1)
+#define PIN_PA6__CANRX2			PINMUX_PIN(PIN_PA6, 3, 1)
+#define PIN_PA6__A24			PINMUX_PIN(PIN_PA6, 4, 1)
+#define PIN_PA6__PWMEXTRG1		PINMUX_PIN(PIN_PA6, 5, 3)
+#define PIN_PA6__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA6, 6, 3)
+#define PIN_PA7				7
+#define PIN_PA7__GPIO			PINMUX_PIN(PIN_PA7, 0, 0)
+#define PIN_PA7__SDMMC0_DAT4		PINMUX_PIN(PIN_PA7, 1, 1)
+#define PIN_PA7__FLEXCOM2_IO0		PINMUX_PIN(PIN_PA7, 2, 1)
+#define PIN_PA7__CANTX1			PINMUX_PIN(PIN_PA7, 3, 1)
+#define PIN_PA7__NWAIT			PINMUX_PIN(PIN_PA7, 4, 1)
+#define PIN_PA7__PWMFI0			PINMUX_PIN(PIN_PA7, 5, 3)
+#define PIN_PA7__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA7, 6, 3)
+#define PIN_PA8				8
+#define PIN_PA8__GPIO			PINMUX_PIN(PIN_PA8, 0, 0)
+#define PIN_PA8__SDMMC0_DAT5		PINMUX_PIN(PIN_PA8, 1, 1)
+#define PIN_PA8__FLEXCOM2_IO1		PINMUX_PIN(PIN_PA8, 2, 1)
+#define PIN_PA8__CANRX1			PINMUX_PIN(PIN_PA8, 3, 1)
+#define PIN_PA8__NCS0			PINMUX_PIN(PIN_PA8, 4, 1)
+#define PIN_PA8__PWMIF1			PINMUX_PIN(PIN_PA8, 5, 3)
+#define PIN_PA8__FLEXCOM4_IO0		PINMUX_PIN(PIN_PA8, 6, 3)
+#define PIN_PA9				9
+#define PIN_PA9__GPIO			PINMUX_PIN(PIN_PA9, 0, 0)
+#define PIN_PA9__SDMMC0_DAT6		PINMUX_PIN(PIN_PA9, 1, 1)
+#define PIN_PA9__FLEXCOM2_IO2		PINMUX_PIN(PIN_PA9, 2, 1)
+#define PIN_PA9__CANTX0			PINMUX_PIN(PIN_PA9, 3, 1)
+#define PIN_PA9__SMCK			PINMUX_PIN(PIN_PA9, 4, 1)
+#define PIN_PA9__SPDIF_RX		PINMUX_PIN(PIN_PA9, 5, 1)
+#define PIN_PA9__FLEXCOM4_IO1		PINMUX_PIN(PIN_PA9, 6, 3)
+#define PIN_PA10			10
+#define PIN_PA10__GPIO			PINMUX_PIN(PIN_PA10, 0, 0)
+#define PIN_PA10__SDMMC0_DAT7		PINMUX_PIN(PIN_PA10, 1, 1)
+#define PIN_PA10__FLEXCOM2_IO3		PINMUX_PIN(PIN_PA10, 2, 1)
+#define PIN_PA10__CANRX0		PINMUX_PIN(PIN_PA10, 3, 1)
+#define PIN_PA10__NCS1			PINMUX_PIN(PIN_PA10, 4, 1)
+#define PIN_PA10__SPDIF_TX		PINMUX_PIN(PIN_PA10, 5, 1)
+#define PIN_PA10__FLEXCOM5_IO0		PINMUX_PIN(PIN_PA10, 6, 3)
+#define PIN_PA11			11
+#define PIN_PA11__GPIO			PINMUX_PIN(PIN_PA11, 0, 0)
+#define PIN_PA11__SDMMC0_DS		PINMUX_PIN(PIN_PA11, 1, 1)
+#define PIN_PA11__FLEXCOM2_IO4		PINMUX_PIN(PIN_PA11, 2, 1)
+#define PIN_PA11__A0_NBS0		PINMUX_PIN(PIN_PA11, 4, 1)
+#define PIN_PA11__TIOA0			PINMUX_PIN(PIN_PA11, 5, 1)
+#define PIN_PA11__FLEXCOM5_IO1		PINMUX_PIN(PIN_PA11, 6, 3)
+#define PIN_PA12			12
+#define PIN_PA12__GPIO			PINMUX_PIN(PIN_PA12, 0, 0)
+#define PIN_PA12__SDMMC0_WP		PINMUX_PIN(PIN_PA12, 1, 1)
+#define PIN_PA12__FLEXCOM1_IO3		PINMUX_PIN(PIN_PA12, 2, 1)
+#define PIN_PA12__FLEXCOM3_IO5		PINMUX_PIN(PIN_PA12, 4, 1)
+#define PIN_PA12__PWML2			PINMUX_PIN(PIN_PA12, 5, 3)
+#define PIN_PA12__FLEXCOM6_IO0		PINMUX_PIN(PIN_PA12, 6, 3)
+#define PIN_PA13			13
+#define PIN_PA13__GPIO			PINMUX_PIN(PIN_PA13, 0, 0)
+#define PIN_PA13__SDMMC0_1V8SEL		PINMUX_PIN(PIN_PA13, 1, 1)
+#define PIN_PA13__FLEXCOM1_IO2		PINMUX_PIN(PIN_PA13, 2, 1)
+#define PIN_PA13__FLEXCOM3_IO6		PINMUX_PIN(PIN_PA13, 4, 1)
+#define PIN_PA13__PWMH2			PINMUX_PIN(PIN_PA13, 5, 3)
+#define PIN_PA13__FLEXCOM6_IO1		PINMUX_PIN(PIN_PA13, 6, 3)
+#define PIN_PA14			14
+#define PIN_PA14__GPIO			PINMUX_PIN(PIN_PA14, 0, 0)
+#define PIN_PA14__SDMMC0_CD		PINMUX_PIN(PIN_PA14, 1, 1)
+#define PIN_PA14__FLEXCOM1_IO4		PINMUX_PIN(PIN_PA14, 2, 1)
+#define PIN_PA14__A25			PINMUX_PIN(PIN_PA14, 4, 1)
+#define PIN_PA14__PWML1			PINMUX_PIN(PIN_PA14, 5, 3)
+#define PIN_PA15			15
+#define PIN_PA15__GPIO			PINMUX_PIN(PIN_PA15, 0, 0)
+#define PIN_PA15__G0_TXEN		PINMUX_PIN(PIN_PA15, 1, 1)
+#define PIN_PA15__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA15, 2, 1)
+#define PIN_PA15__ISC_MCK		PINMUX_PIN(PIN_PA15, 3, 1)
+#define PIN_PA15__A1			PINMUX_PIN(PIN_PA15, 4, 1)
+#define PIN_PA15__TIOB0			PINMUX_PIN(PIN_PA15, 5, 1)
+#define PIN_PA16			16
+#define PIN_PA16__GPIO			PINMUX_PIN(PIN_PA16, 0, 0)
+#define PIN_PA16__G0_TX0		PINMUX_PIN(PIN_PA16, 1, 1)
+#define PIN_PA16__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA16, 2, 1)
+#define PIN_PA16__ISC_D0		PINMUX_PIN(PIN_PA16, 3, 1)
+#define PIN_PA16__A2			PINMUX_PIN(PIN_PA16, 4, 1)
+#define PIN_PA16__TCLK0			PINMUX_PIN(PIN_PA16, 5, 1)
+#define PIN_PA17			17
+#define PIN_PA17__GPIO			PINMUX_PIN(PIN_PA17, 0, 0)
+#define PIN_PA17__G0_TX1		PINMUX_PIN(PIN_PA17, 1, 1)
+#define PIN_PA17__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA17, 2, 1)
+#define PIN_PA17__ISC_D1		PINMUX_PIN(PIN_PA17, 3, 1)
+#define PIN_PA17__A3			PINMUX_PIN(PIN_PA17, 4, 1)
+#define PIN_PA17__TIOA1			PINMUX_PIN(PIN_PA17, 5, 1)
+#define PIN_PA18			18
+#define PIN_PA18__GPIO			PINMUX_PIN(PIN_PA18, 0, 0)
+#define PIN_PA18__G0_RXDV		PINMUX_PIN(PIN_PA18, 1, 1)
+#define PIN_PA18__FLEXCOM3_IO3		PINMUX_PIN(PIN_PA18, 2, 1)
+#define PIN_PA18__ISC_D2		PINMUX_PIN(PIN_PA18, 3, 1)
+#define PIN_PA18__A4			PINMUX_PIN(PIN_PA18, 4, 1)
+#define PIN_PA18__TIOB1			PINMUX_PIN(PIN_PA18, 5, 1)
+#define PIN_PA19			19
+#define PIN_PA19__GPIO			PINMUX_PIN(PIN_PA19, 0, 0)
+#define PIN_PA19__G0_RX0		PINMUX_PIN(PIN_PA19, 1, 1)
+#define PIN_PA19__FLEXCOM3_IO4		PINMUX_PIN(PIN_PA19, 2, 1)
+#define PIN_PA19__ISC_D3		PINMUX_PIN(PIN_PA19, 3, 1)
+#define PIN_PA19__A5			PINMUX_PIN(PIN_PA19, 4, 1)
+#define PIN_PA19__TCLK1			PINMUX_PIN(PIN_PA19, 5, 1)
+#define PIN_PA20			20
+#define PIN_PA20__GPIO			PINMUX_PIN(PIN_PA20, 0, 0)
+#define PIN_PA20__G0_RX1		PINMUX_PIN(PIN_PA20, 1, 1)
+#define PIN_PA20__FLEXCOM4_IO0		PINMUX_PIN(PIN_PA20, 2, 1)
+#define PIN_PA20__ISC_D4		PINMUX_PIN(PIN_PA20, 3, 1)
+#define PIN_PA20__A6			PINMUX_PIN(PIN_PA20, 4, 1)
+#define PIN_PA20__TIOA2			PINMUX_PIN(PIN_PA20, 5, 1)
+#define PIN_PA21			21
+#define PIN_PA21__GPIO			PINMUX_PIN(PIN_PA21, 0, 0)
+#define PIN_PA21__G0_RXER		PINMUX_PIN(PIN_PA21, 1, 1)
+#define PIN_PA21__FLEXCOM4_IO1		PINMUX_PIN(PIN_PA21, 2, 1)
+#define PIN_PA21__ISC_D5		PINMUX_PIN(PIN_PA21, 3, 1)
+#define PIN_PA21__A7			PINMUX_PIN(PIN_PA21, 4, 1)
+#define PIN_PA21__TIOB2			PINMUX_PIN(PIN_PA21, 5, 1)
+#define PIN_PA22			22
+#define PIN_PA22__GPIO			PINMUX_PIN(PIN_PA22, 0, 0)
+#define PIN_PA22__G0_MDC		PINMUX_PIN(PIN_PA22, 1, 1)
+#define PIN_PA22__FLEXCOM4_IO2		PINMUX_PIN(PIN_PA22, 2, 1)
+#define PIN_PA22__ISC_D6		PINMUX_PIN(PIN_PA22, 3, 1)
+#define PIN_PA22__A8			PINMUX_PIN(PIN_PA22, 4, 1)
+#define PIN_PA22__TCLK2			PINMUX_PIN(PIN_PA22, 5, 1)
+#define PIN_PA23			23
+#define PIN_PA23__GPIO			PINMUX_PIN(PIN_PA23, 0, 0)
+#define PIN_PA23__G0_MDIO		PINMUX_PIN(PIN_PA23, 1, 1)
+#define PIN_PA23__FLEXCOM4_IO3		PINMUX_PIN(PIN_PA23, 2, 1)
+#define PIN_PA23__ISC_D7		PINMUX_PIN(PIN_PA23, 3, 1)
+#define PIN_PA23__A9			PINMUX_PIN(PIN_PA23, 4, 1)
+#define PIN_PA24			24
+#define PIN_PA24__GPIO			PINMUX_PIN(PIN_PA24, 0, 0)
+#define PIN_PA24__G0_TXCK		PINMUX_PIN(PIN_PA24, 1, 1)
+#define PIN_PA24__FLEXCOM4_IO4		PINMUX_PIN(PIN_PA24, 2, 1)
+#define PIN_PA24__ISC_HSYNC		PINMUX_PIN(PIN_PA24, 3, 1)
+#define PIN_PA24__A10			PINMUX_PIN(PIN_PA24, 4, 1)
+#define PIN_PA24__FLEXCOM0_IO5		PINMUX_PIN(PIN_PA24, 5, 1)
+#define PIN_PA25			25
+#define PIN_PA25__GPIO			PINMUX_PIN(PIN_PA25, 0, 0)
+#define PIN_PA25__G0_125CK		PINMUX_PIN(PIN_PA25, 1, 1)
+#define PIN_PA25__FLEXCOM5_IO4		PINMUX_PIN(PIN_PA25, 2, 1)
+#define PIN_PA25__ISC_VSYNC		PINMUX_PIN(PIN_PA25, 3, 1)
+#define PIN_PA25__A11			PINMUX_PIN(PIN_PA25, 4, 1)
+#define PIN_PA25__FLEXCOM0_IO6		PINMUX_PIN(PIN_PA25, 5, 1)
+#define PIN_PA25__FLEXCOM7_IO0		PINMUX_PIN(PIN_PA25, 6, 3)
+#define PIN_PA26			26
+#define PIN_PA26__GPIO			PINMUX_PIN(PIN_PA26, 0, 0)
+#define PIN_PA26__G0_TX2		PINMUX_PIN(PIN_PA26, 1, 1)
+#define PIN_PA26__FLEXCOM5_IO2		PINMUX_PIN(PIN_PA26, 2, 1)
+#define PIN_PA26__ISC_FIELD		PINMUX_PIN(PIN_PA26, 3, 1)
+#define PIN_PA26__A12			PINMUX_PIN(PIN_PA26, 4, 1)
+#define PIN_PA26__TF0			PINMUX_PIN(PIN_PA26, 5, 1)
+#define PIN_PA26__FLEXCOM7_IO1		PINMUX_PIN(PIN_PA26, 6, 3)
+#define PIN_PA27			27
+#define PIN_PA27__GPIO			PINMUX_PIN(PIN_PA27, 0, 0)
+#define PIN_PA27__G0_TX3		PINMUX_PIN(PIN_PA27, 1, 1)
+#define PIN_PA27__FLEXCOM5_IO3		PINMUX_PIN(PIN_PA27, 2, 1)
+#define PIN_PA27__ISC_PCK		PINMUX_PIN(PIN_PA27, 3, 1)
+#define PIN_PA27__A13			PINMUX_PIN(PIN_PA27, 4, 1)
+#define PIN_PA27__TK0			PINMUX_PIN(PIN_PA27, 5, 1)
+#define PIN_PA27__FLEXCOM8_IO0		PINMUX_PIN(PIN_PA27, 6, 3)
+#define PIN_PA28			28
+#define PIN_PA28__GPIO			PINMUX_PIN(PIN_PA28, 0, 0)
+#define PIN_PA28__G0_RX2		PINMUX_PIN(PIN_PA28, 1, 1)
+#define PIN_PA28__FLEXCOM5_IO0		PINMUX_PIN(PIN_PA28, 2, 1)
+#define PIN_PA28__ISC_D8		PINMUX_PIN(PIN_PA28, 3, 1)
+#define PIN_PA28__A14			PINMUX_PIN(PIN_PA28, 4, 1)
+#define PIN_PA28__RD0			PINMUX_PIN(PIN_PA28, 5, 1)
+#define PIN_PA28__FLEXCOM8_IO1		PINMUX_PIN(PIN_PA28, 6, 3)
+#define PIN_PA29			29
+#define PIN_PA29__GPIO			PINMUX_PIN(PIN_PA29, 0, 0)
+#define PIN_PA29__G0_RX3		PINMUX_PIN(PIN_PA29, 1, 1)
+#define PIN_PA29__FLEXCOM5_IO1		PINMUX_PIN(PIN_PA29, 2, 1)
+#define PIN_PA29__ISC_D9		PINMUX_PIN(PIN_PA29, 3, 1)
+#define PIN_PA29__A15			PINMUX_PIN(PIN_PA29, 4, 1)
+#define PIN_PA29__RF0			PINMUX_PIN(PIN_PA29, 5, 1)
+#define PIN_PA29__FLEXCOM9_IO0		PINMUX_PIN(PIN_PA29, 6, 3)
+#define PIN_PA30			30
+#define PIN_PA30__GPIO			PINMUX_PIN(PIN_PA30, 0, 0)
+#define PIN_PA30__G0_RXCK		PINMUX_PIN(PIN_PA30, 1, 1)
+#define PIN_PA30__FLEXCOM6_IO4		PINMUX_PIN(PIN_PA30, 2, 1)
+#define PIN_PA30__ISC_D10		PINMUX_PIN(PIN_PA30, 3, 1)
+#define PIN_PA30__A16			PINMUX_PIN(PIN_PA30, 4, 1)
+#define PIN_PA30__RK0			PINMUX_PIN(PIN_PA30, 5, 1)
+#define PIN_PA30__FLEXCOM9_IO1		PINMUX_PIN(PIN_PA30, 6, 3)
+#define PIN_PA31			31
+#define PIN_PA31__GPIO			PINMUX_PIN(PIN_PA31, 0, 0)
+#define PIN_PA31__G0_TXER		PINMUX_PIN(PIN_PA31, 1, 1)
+#define PIN_PA31__FLEXCOM6_IO2		PINMUX_PIN(PIN_PA31, 2, 1)
+#define PIN_PA31__ISC_D11		PINMUX_PIN(PIN_PA31, 3, 1)
+#define PIN_PA31__A17			PINMUX_PIN(PIN_PA31, 4, 1)
+#define PIN_PA31__TD0			PINMUX_PIN(PIN_PA31, 5, 1)
+#define PIN_PA31__FLEXCOM10_IO0		PINMUX_PIN(PIN_PA31, 6, 3)
+#define PIN_PB0				32
+#define PIN_PB0__GPIO			PINMUX_PIN(PIN_PB0, 0, 0)
+#define PIN_PB0__G0_COL			PINMUX_PIN(PIN_PB0, 1, 1)
+#define PIN_PB0__FLEXCOM6_IO3		PINMUX_PIN(PIN_PB0, 2, 2)
+#define PIN_PB0__EXT_IRQ0		PINMUX_PIN(PIN_PB0, 3, 1)
+#define PIN_PB0__A18			PINMUX_PIN(PIN_PB0, 4, 1)
+#define PIN_PB0__SPDIF_RX		PINMUX_PIN(PIN_PB0, 5, 2)
+#define PIN_PB0__FLEXCOM10_IO1		PINMUX_PIN(PIN_PB0, 6, 3)
+#define PIN_PB1				33
+#define PIN_PB1__GPIO			PINMUX_PIN(PIN_PB1, 0, 0)
+#define PIN_PB1__G0_CRS			PINMUX_PIN(PIN_PB1, 1, 1)
+#define PIN_PB1__FLEXCOM6_IO1		PINMUX_PIN(PIN_PB1, 2, 2)
+#define PIN_PB1__EXT_IRQ1		PINMUX_PIN(PIN_PB1, 3, 1)
+#define PIN_PB1__A19			PINMUX_PIN(PIN_PB1, 4, 1)
+#define PIN_PB1__SPDIF_TX		PINMUX_PIN(PIN_PB1, 5, 2)
+#define PIN_PB1__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB1, 6, 3)
+#define PIN_PB2				34
+#define PIN_PB2__GPIO			PINMUX_PIN(PIN_PB2, 0, 0)
+#define PIN_PB2__G0_TSUCOMP		PINMUX_PIN(PIN_PB2, 1, 1)
+#define PIN_PB2__FLEXCOM6_IO0		PINMUX_PIN(PIN_PB2, 2, 1)
+#define PIN_PB2__ADTRG			PINMUX_PIN(PIN_PB2, 3, 1)
+#define PIN_PB2__A20			PINMUX_PIN(PIN_PB2, 4, 1)
+#define PIN_PB2__FLEXCOM11_IO1		PINMUX_PIN(PIN_PB2, 6, 3)
+#define PIN_PB3				35
+#define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
+#define PIN_PB3__RF1			PINMUX_PIN(PIN_PB3, 1, 1)
+#define PIN_PB3__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB3, 2, 1)
+#define PIN_PB3__PCK2			PINMUX_PIN(PIN_PB3, 3, 2)
+#define PIN_PB3__D8			PINMUX_PIN(PIN_PB3, 4, 1)
+#define PIN_PB4				36
+#define PIN_PB4__GPIO			PINMUX_PIN(PIN_PB4, 0, 0)
+#define PIN_PB4__TF1			PINMUX_PIN(PIN_PB4, 1, 1)
+#define PIN_PB4__FLEXCOM11_IO1		PINMUX_PIN(PIN_PB4, 2, 1)
+#define PIN_PB4__PCK3			PINMUX_PIN(PIN_PB4, 3, 2)
+#define PIN_PB4__D9			PINMUX_PIN(PIN_PB4, 4, 1)
+#define PIN_PB5				37
+#define PIN_PB5__GPIO			PINMUX_PIN(PIN_PB5, 0, 0)
+#define PIN_PB5__TK1			PINMUX_PIN(PIN_PB5, 1, 1)
+#define PIN_PB5__FLEXCOM11_IO2		PINMUX_PIN(PIN_PB5, 2, 1)
+#define PIN_PB5__PCK4			PINMUX_PIN(PIN_PB5, 3, 2)
+#define PIN_PB5__D10			PINMUX_PIN(PIN_PB5, 4, 1)
+#define PIN_PB6				38
+#define PIN_PB6__GPIO			PINMUX_PIN(PIN_PB6, 0, 0)
+#define PIN_PB6__RK1			PINMUX_PIN(PIN_PB6, 1, 1)
+#define PIN_PB6__FLEXCOM11_IO3		PINMUX_PIN(PIN_PB6, 2, 1)
+#define PIN_PB6__PCK5			PINMUX_PIN(PIN_PB6, 3, 2)
+#define PIN_PB6__D11			PINMUX_PIN(PIN_PB6, 4, 1)
+#define PIN_PB7				39
+#define PIN_PB7__GPIO			PINMUX_PIN(PIN_PB7, 0, 0)
+#define PIN_PB7__TD1			PINMUX_PIN(PIN_PB7, 1, 1)
+#define PIN_PB7__FLEXCOM11_IO4		PINMUX_PIN(PIN_PB7, 2, 1)
+#define PIN_PB7__FLEXCOM3_IO5		PINMUX_PIN(PIN_PB7, 3, 2)
+#define PIN_PB7__D12			PINMUX_PIN(PIN_PB7, 4, 1)
+#define PIN_PB8				40
+#define PIN_PB8__GPIO			PINMUX_PIN(PIN_PB8, 0, 0)
+#define PIN_PB8__RD1			PINMUX_PIN(PIN_PB8, 1, 1)
+#define PIN_PB8__FLEXCOM8_IO0		PINMUX_PIN(PIN_PB8, 2, 1)
+#define PIN_PB8__FLEXCOM3_IO6		PINMUX_PIN(PIN_PB8, 3, 2)
+#define PIN_PB8__D13			PINMUX_PIN(PIN_PB8, 4, 1)
+#define PIN_PB9				41
+#define PIN_PB9__GPIO			PINMUX_PIN(PIN_PB9, 0, 0)
+#define PIN_PB9__QSPI0_IO3		PINMUX_PIN(PIN_PB9, 1, 1)
+#define PIN_PB9__FLEXCOM8_IO1		PINMUX_PIN(PIN_PB9, 2, 1)
+#define PIN_PB9__PDMC0_CLK		PINMUX_PIN(PIN_PB9, 3, 1)
+#define PIN_PB9__NCS3_NANDCS		PINMUX_PIN(PIN_PB9, 4, 1)
+#define PIN_PB9__PWML0			PINMUX_PIN(PIN_PB9, 5, 2)
+#define PIN_PB10			42
+#define PIN_PB10__GPIO			PINMUX_PIN(PIN_PB10, 0, 0)
+#define PIN_PB10__QSPI0_IO2		PINMUX_PIN(PIN_PB10, 1, 1)
+#define PIN_PB10__FLEXCOM8_IO2		PINMUX_PIN(PIN_PB10, 2, 1)
+#define PIN_PB10__PDMC0_DS0		PINMUX_PIN(PIN_PB10, 3, 1)
+#define PIN_PB10__NWE_NWR0_NANDWE	PINMUX_PIN(PIN_PB10, 4, 1)
+#define PIN_PB10__PWMH0			PINMUX_PIN(PIN_PB10, 5, 2)
+#define PIN_PB11			43
+#define PIN_PB11__GPIO			PINMUX_PIN(PIN_PB11, 0, 0)
+#define PIN_PB11__QSPI0_IO1		PINMUX_PIN(PIN_PB11, 1, 1)
+#define PIN_PB11__FLEXCOM8_IO3		PINMUX_PIN(PIN_PB11, 2, 1)
+#define PIN_PB11__PDMC0_DS1		PINMUX_PIN(PIN_PB11, 3, 1)
+#define PIN_PB11__NRD_NANDOE		PINMUX_PIN(PIN_PB11, 4, 1)
+#define PIN_PB11__PWML1			PINMUX_PIN(PIN_PB11, 5, 2)
+#define PIN_PB12			44
+#define PIN_PB12__GPIO			PINMUX_PIN(PIN_PB12, 0, 0)
+#define PIN_PB12__QSPI0_IO0		PINMUX_PIN(PIN_PB12, 1, 1)
+#define PIN_PB12__FLEXCOM8_IO4		PINMUX_PIN(PIN_PB12, 2, 1)
+#define PIN_PB12__FLEXCOM6_IO5		PINMUX_PIN(PIN_PB12, 3, 1)
+#define PIN_PB12__A21_NANDALE		PINMUX_PIN(PIN_PB12, 4, 1)
+#define PIN_PB12__PWMH1			PINMUX_PIN(PIN_PB12, 5, 2)
+#define PIN_PB13			45
+#define PIN_PB13__GPIO			PINMUX_PIN(PIN_PB13, 0, 0)
+#define PIN_PB13__QSPI0_CS		PINMUX_PIN(PIN_PB13, 1, 1)
+#define PIN_PB13__FLEXCOM9_IO0		PINMUX_PIN(PIN_PB13, 2, 1)
+#define PIN_PB13__FLEXCOM6_IO6		PINMUX_PIN(PIN_PB13, 3, 1)
+#define PIN_PB13__A22_NANDCLE		PINMUX_PIN(PIN_PB13, 4, 1)
+#define PIN_PB13__PWML2			PINMUX_PIN(PIN_PB13, 5, 2)
+#define PIN_PB14			46
+#define PIN_PB14__GPIO			PINMUX_PIN(PIN_PB14, 0, 0)
+#define PIN_PB14__QSPI0_SCK		PINMUX_PIN(PIN_PB14, 1, 1)
+#define PIN_PB14__FLEXCOM9_IO1		PINMUX_PIN(PIN_PB14, 2, 1)
+#define PIN_PB14__D0			PINMUX_PIN(PIN_PB14, 4, 1)
+#define PIN_PB14__PWMH2			PINMUX_PIN(PIN_PB14, 5, 2)
+#define PIN_PB15			47
+#define PIN_PB15__GPIO			PINMUX_PIN(PIN_PB15, 0, 0)
+#define PIN_PB15__QSPI0_SCKN		PINMUX_PIN(PIN_PB15, 1, 1)
+#define PIN_PB15__FLEXCOM9_IO2		PINMUX_PIN(PIN_PB15, 2, 1)
+#define PIN_PB15__D1			PINMUX_PIN(PIN_PB15, 4, 1)
+#define PIN_PB15__PWML3			PINMUX_PIN(PIN_PB15, 5, 2)
+#define PIN_PB16			48
+#define PIN_PB16__GPIO			PINMUX_PIN(PIN_PB16, 0, 0)
+#define PIN_PB16__QSPI0_IO4		PINMUX_PIN(PIN_PB16, 1, 1)
+#define PIN_PB16__FLEXCOM9_IO3		PINMUX_PIN(PIN_PB16, 2, 1)
+#define PIN_PB16__PCK0			PINMUX_PIN(PIN_PB16, 3, 1)
+#define PIN_PB16__D2			PINMUX_PIN(PIN_PB16, 4, 1)
+#define PIN_PB16__PWMH3			PINMUX_PIN(PIN_PB16, 5, 2)
+#define PIN_PB16__EXT_IRQ0		PINMUX_PIN(PIN_PB16, 6, 2)
+#define PIN_PB17			49
+#define PIN_PB17__GPIO			PINMUX_PIN(PIN_PB17, 0, 0)
+#define PIN_PB17__QSPI0_IO5		PINMUX_PIN(PIN_PB17, 1, 1)
+#define PIN_PB17__FLEXCOM9_IO4		PINMUX_PIN(PIN_PB17, 2, 1)
+#define PIN_PB17__PCK1			PINMUX_PIN(PIN_PB17, 3, 1)
+#define PIN_PB17__D3			PINMUX_PIN(PIN_PB17, 4, 1)
+#define PIN_PB17__PWMEXTRG0		PINMUX_PIN(PIN_PB17, 5, 2)
+#define PIN_PB17__EXT_IRQ1		PINMUX_PIN(PIN_PB17, 6, 2)
+#define PIN_PB18			50
+#define PIN_PB18__GPIO			PINMUX_PIN(PIN_PB18, 0, 0)
+#define PIN_PB18__QSPI0_IO6		PINMUX_PIN(PIN_PB18, 1, 1)
+#define PIN_PB18__FLEXCOM10_IO0		PINMUX_PIN(PIN_PB18, 2, 1)
+#define PIN_PB18__PCK2			PINMUX_PIN(PIN_PB18, 3, 1)
+#define PIN_PB18__D4			PINMUX_PIN(PIN_PB18, 4, 1)
+#define PIN_PB18__PWMEXTRG1		PINMUX_PIN(PIN_PB18, 5, 2)
+#define PIN_PB19			51
+#define PIN_PB19__GPIO			PINMUX_PIN(PIN_PB19, 0, 0)
+#define PIN_PB19__QSPI0_IO7		PINMUX_PIN(PIN_PB19, 1, 1)
+#define PIN_PB19__FLEXCOM10_IO1		PINMUX_PIN(PIN_PB19, 2, 1)
+#define PIN_PB19__PCK3			PINMUX_PIN(PIN_PB19, 3, 1)
+#define PIN_PB19__D5			PINMUX_PIN(PIN_PB19, 4, 1)
+#define PIN_PB19__PWMFI0		PINMUX_PIN(PIN_PB19, 5, 2)
+#define PIN_PB20			52
+#define PIN_PB20__GPIO			PINMUX_PIN(PIN_PB20, 0, 0)
+#define PIN_PB20__QSPI0_DQS		PINMUX_PIN(PIN_PB20, 1, 1)
+#define PIN_PB20__FLEXCOM10_IO2		PINMUX_PIN(PIN_PB20, 2, 1)
+#define PIN_PB20__D6			PINMUX_PIN(PIN_PB20, 4, 1)
+#define PIN_PB20__PWMFI1		PINMUX_PIN(PIN_PB20, 5, 2)
+#define PIN_PB21			53
+#define PIN_PB21__GPIO			PINMUX_PIN(PIN_PB21, 0, 0)
+#define PIN_PB21__QSPI0_INT		PINMUX_PIN(PIN_PB21, 1, 1)
+#define PIN_PB21__FLEXCOM10_IO3		PINMUX_PIN(PIN_PB21, 2, 1)
+#define PIN_PB21__FLEXCOM9_IO5		PINMUX_PIN(PIN_PB21, 3, 1)
+#define PIN_PB21__D7			PINMUX_PIN(PIN_PB21, 4, 1)
+#define PIN_PB22			54
+#define PIN_PB22__GPIO			PINMUX_PIN(PIN_PB22, 0, 0)
+#define PIN_PB22__QSPI1_IO3		PINMUX_PIN(PIN_PB22, 1, 1)
+#define PIN_PB22__FLEXCOM10_IO4		PINMUX_PIN(PIN_PB22, 2, 1)
+#define PIN_PB22__FLEXCOM9_IO6		PINMUX_PIN(PIN_PB22, 3, 1)
+#define PIN_PB22__NANDRDY		PINMUX_PIN(PIN_PB22, 4, 1)
+#define PIN_PB23			55
+#define PIN_PB23__GPIO			PINMUX_PIN(PIN_PB23, 0, 0)
+#define PIN_PB23__QSPI1_IO2		PINMUX_PIN(PIN_PB23, 1, 1)
+#define PIN_PB23__FLEXCOM7_IO0		PINMUX_PIN(PIN_PB23, 2, 1)
+#define PIN_PB23__I2SMCC0_CK		PINMUX_PIN(PIN_PB23, 3, 1)
+#define PIN_PB23__PCK4			PINMUX_PIN(PIN_PB23, 6, 1)
+#define PIN_PB24			56
+#define PIN_PB24__GPIO			PINMUX_PIN(PIN_PB24, 0, 0)
+#define PIN_PB24__QSPI1_IO1		PINMUX_PIN(PIN_PB24, 1, 1)
+#define PIN_PB24__FLEXCOM7_IO1		PINMUX_PIN(PIN_PB24, 2, 1)
+#define PIN_PB24__I2SMCC0_WS		PINMUX_PIN(PIN_PB24, 3, 1)
+#define PIN_PB24__PCK5			PINMUX_PIN(PIN_PB24, 6, 1)
+#define PIN_PB25			57
+#define PIN_PB25__GPIO			PINMUX_PIN(PIN_PB25, 0, 0)
+#define PIN_PB25__QSPI1_IO0		PINMUX_PIN(PIN_PB25, 1, 1)
+#define PIN_PB25__FLEXCOM7_IO2		PINMUX_PIN(PIN_PB25, 2, 1)
+#define PIN_PB25__I2SMCC0_DOUT1		PINMUX_PIN(PIN_PB25, 3, 1)
+#define PIN_PB25__PCK6			PINMUX_PIN(PIN_PB25, 6, 1)
+#define PIN_PB26			58
+#define PIN_PB26__GPIO			PINMUX_PIN(PIN_PB26, 0, 0)
+#define PIN_PB26__QSPI1_CS		PINMUX_PIN(PIN_PB26, 1, 1)
+#define PIN_PB26__FLEXCOM7_IO3		PINMUX_PIN(PIN_PB26, 2, 1)
+#define PIN_PB26__I2SMCC0_DOUT0		PINMUX_PIN(PIN_PB26, 3, 1)
+#define PIN_PB26__PWMEXTRG0		PINMUX_PIN(PIN_PB26, 5, 1)
+#define PIN_PB26__PCK7			PINMUX_PIN(PIN_PB26, 6, 1)
+#define PIN_PB27			59
+#define PIN_PB27__GPIO			PINMUX_PIN(PIN_PB27, 0, 0)
+#define PIN_PB27__QSPI1_SCK		PINMUX_PIN(PIN_PB27, 1, 1)
+#define PIN_PB27__FLEXCOM7_IO4		PINMUX_PIN(PIN_PB27, 2, 1)
+#define PIN_PB27__I2SMCC0_MCK		PINMUX_PIN(PIN_PB27, 3, 1)
+#define PIN_PB27__PWMEXTRG1		PINMUX_PIN(PIN_PB27, 5, 1)
+#define PIN_PB28			60
+#define PIN_PB28__GPIO			PINMUX_PIN(PIN_PB28, 0, 0)
+#define PIN_PB28__SDMMC1_RSTN		PINMUX_PIN(PIN_PB28, 1, 1)
+#define PIN_PB28__ADTRG			PINMUX_PIN(PIN_PB28, 2, 2)
+#define PIN_PB28__PWMFI0		PINMUX_PIN(PIN_PB28, 5, 1)
+#define PIN_PB28__FLEXCOM7_IO0		PINMUX_PIN(PIN_PB28, 6, 4)
+#define PIN_PB29			61
+#define PIN_PB29__GPIO			PINMUX_PIN(PIN_PB29, 0, 0)
+#define PIN_PB29__SDMMC1_CMD		PINMUX_PIN(PIN_PB29, 1, 1)
+#define PIN_PB29__FLEXCOM3_IO2		PINMUX_PIN(PIN_PB29, 2, 2)
+#define PIN_PB29__FLEXCOM0_IO5		PINMUX_PIN(PIN_PB29, 3, 2)
+#define PIN_PB29__TIOA3			PINMUX_PIN(PIN_PB29, 4, 2)
+#define PIN_PB29__PWMFI1		PINMUX_PIN(PIN_PB29, 5, 1)
+#define PIN_PB29__FLEXCOM7_IO1		PINMUX_PIN(PIN_PB29, 6, 4)
+#define PIN_PB30			62
+#define PIN_PB30__GPIO			PINMUX_PIN(PIN_PB30, 0, 0)
+#define PIN_PB30__SDMMC1_CK		PINMUX_PIN(PIN_PB30, 1, 1)
+#define PIN_PB30__FLEXCOM3_IO3		PINMUX_PIN(PIN_PB30, 2, 2)
+#define PIN_PB30__FLEXCOM0_IO6		PINMUX_PIN(PIN_PB30, 3, 2)
+#define PIN_PB30__TIOB3			PINMUX_PIN(PIN_PB30, 4, 1)
+#define PIN_PB30__PWMH0			PINMUX_PIN(PIN_PB30, 5, 1)
+#define PIN_PB30__FLEXCOM8_IO0		PINMUX_PIN(PIN_PB30, 6, 4)
+#define PIN_PB31			63
+#define PIN_PB31__GPIO			PINMUX_PIN(PIN_PB31, 0, 0)
+#define PIN_PB31__SDMMC1_DAT0		PINMUX_PIN(PIN_PB31, 1, 1)
+#define PIN_PB31__FLEXCOM3_IO4		PINMUX_PIN(PIN_PB31, 2, 2)
+#define PIN_PB31__FLEXCOM9_IO5		PINMUX_PIN(PIN_PB31, 3, 2)
+#define PIN_PB31__TCLK3			PINMUX_PIN(PIN_PB31, 4, 1)
+#define PIN_PB31__PWML0			PINMUX_PIN(PIN_PB31, 5, 1)
+#define PIN_PB31__FLEXCOM8_IO1		PINMUX_PIN(PIN_PB31, 6, 4)
+#define PIN_PC0				64
+#define PIN_PC0__GPIO			PINMUX_PIN(PIN_PC0, 0, 0)
+#define PIN_PC0__SDMMC1_DAT1		PINMUX_PIN(PIN_PC0, 1, 1)
+#define PIN_PC0__FLEXCOM3_IO0		PINMUX_PIN(PIN_PC0, 2, 2)
+#define PIN_PC0__TIOA4			PINMUX_PIN(PIN_PC0, 4, 1)
+#define PIN_PC0__PWML1			PINMUX_PIN(PIN_PC0, 5, 1)
+#define PIN_PC0__FLEXCOM9_IO0		PINMUX_PIN(PIN_PC0, 6, 4)
+#define PIN_PC1				65
+#define PIN_PC1__GPIO			PINMUX_PIN(PIN_PC1, 0, 0)
+#define PIN_PC1__SDMMC1_DAT2		PINMUX_PIN(PIN_PC1, 1, 1)
+#define PIN_PC1__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC1, 2, 2)
+#define PIN_PC1__TIOB4			PINMUX_PIN(PIN_PC1, 4, 1)
+#define PIN_PC1__PWMH1			PINMUX_PIN(PIN_PC1, 5, 1)
+#define PIN_PC1__FLEXCOM9_IO1		PINMUX_PIN(PIN_PC1, 6, 4)
+#define PIN_PC2				66
+#define PIN_PC2__GPIO			PINMUX_PIN(PIN_PC2, 0, 0)
+#define PIN_PC2__SDMMC1_DAT3		PINMUX_PIN(PIN_PC2, 1, 1)
+#define PIN_PC2__FLEXCOM4_IO0		PINMUX_PIN(PIN_PC2, 2, 2)
+#define PIN_PC2__TCLK4			PINMUX_PIN(PIN_PC2, 4, 1)
+#define PIN_PC2__PWML2			PINMUX_PIN(PIN_PC2, 5, 1)
+#define PIN_PC2__FLEXCOM10_IO0		PINMUX_PIN(PIN_PC2, 6, 4)
+#define PIN_PC3				67
+#define PIN_PC3__GPIO			PINMUX_PIN(PIN_PC3, 0, 0)
+#define PIN_PC3__SDMMC1_WP		PINMUX_PIN(PIN_PC3, 1, 1)
+#define PIN_PC3__FLEXCOM4_IO1		PINMUX_PIN(PIN_PC3, 2, 2)
+#define PIN_PC3__TIOA5			PINMUX_PIN(PIN_PC3, 4, 1)
+#define PIN_PC3__PWMH2			PINMUX_PIN(PIN_PC3, 5, 1)
+#define PIN_PC3__FLEXCOM10_IO1		PINMUX_PIN(PIN_PC3, 6, 4)
+#define PIN_PC4				68
+#define PIN_PC4__GPIO			PINMUX_PIN(PIN_PC4, 0, 0)
+#define PIN_PC4__SDMMC1_CD		PINMUX_PIN(PIN_PC4, 1, 1)
+#define PIN_PC4__FLEXCOM4_IO2		PINMUX_PIN(PIN_PC4, 2, 2)
+#define PIN_PC4__FLEXCOM9_IO6		PINMUX_PIN(PIN_PC4, 3, 2)
+#define PIN_PC4__TIOB5			PINMUX_PIN(PIN_PC4, 4, 1)
+#define PIN_PC4__PWML3			PINMUX_PIN(PIN_PC4, 5, 1)
+#define PIN_PC4__FLEXCOM11_IO0		PINMUX_PIN(PIN_PC4, 6, 4)
+#define PIN_PC5				69
+#define PIN_PC5__GPIO			PINMUX_PIN(PIN_PC5, 0, 0)
+#define PIN_PC5__SDMMC1_1V8SEL		PINMUX_PIN(PIN_PC5, 1, 1)
+#define PIN_PC5__FLEXCOM4_IO3		PINMUX_PIN(PIN_PC5, 2, 2)
+#define PIN_PC5__FLEXCOM6_IO5		PINMUX_PIN(PIN_PC5, 3, 2)
+#define PIN_PC5__TCLK5			PINMUX_PIN(PIN_PC5, 4, 1)
+#define PIN_PC5__PWMH3			PINMUX_PIN(PIN_PC5, 5, 1)
+#define PIN_PC5__FLEXCOM11_IO1		PINMUX_PIN(PIN_PC5, 6, 4)
+#define PIN_PC6				70
+#define PIN_PC6__GPIO			PINMUX_PIN(PIN_PC6, 0, 0)
+#define PIN_PC6__FLEXCOM4_IO4		PINMUX_PIN(PIN_PC6, 2, 2)
+#define PIN_PC6__FLEXCOM6_IO6		PINMUX_PIN(PIN_PC6, 3, 2)
+#define PIN_PC7				71
+#define PIN_PC7__GPIO			PINMUX_PIN(PIN_PC7, 0, 0)
+#define PIN_PC7__I2SMCC0_DIN0		PINMUX_PIN(PIN_PC7, 1, 1)
+#define PIN_PC7__FLEXCOM7_IO0		PINMUX_PIN(PIN_PC7, 2, 2)
+#define PIN_PC8				72
+#define PIN_PC8__GPIO			PINMUX_PIN(PIN_PC8, 0, 0)
+#define PIN_PC8__I2SMCC0_DIN1		PINMUX_PIN(PIN_PC8, 1, 1)
+#define PIN_PC8__FLEXCOM7_IO1		PINMUX_PIN(PIN_PC8, 2, 2)
+#define PIN_PC9				73
+#define PIN_PC9__GPIO			PINMUX_PIN(PIN_PC9, 0, 0)
+#define PIN_PC9__I2SMCC0_DOUT3		PINMUX_PIN(PIN_PC9, 1, 1)
+#define PIN_PC9__FLEXCOM7_IO2		PINMUX_PIN(PIN_PC9, 2, 2)
+#define PIN_PC9__FLEXCOM1_IO0		PINMUX_PIN(PIN_PC9, 6, 4)
+#define PIN_PC10			74
+#define PIN_PC10__GPIO			PINMUX_PIN(PIN_PC10, 0, 0)
+#define PIN_PC10__I2SMCC0_DOUT2		PINMUX_PIN(PIN_PC10, 1, 1)
+#define PIN_PC10__FLEXCOM7_IO3		PINMUX_PIN(PIN_PC10, 2, 2)
+#define PIN_PC10__FLEXCOM1_IO1		PINMUX_PIN(PIN_PC10, 6, 4)
+#define PIN_PC11			75
+#define PIN_PC11__GPIO			PINMUX_PIN(PIN_PC11, 0, 0)
+#define PIN_PC11__I2SMCC1_CK		PINMUX_PIN(PIN_PC11, 1, 1)
+#define PIN_PC11__FLEXCOM7_IO4		PINMUX_PIN(PIN_PC11, 2, 2)
+#define PIN_PC11__FLEXCOM2_IO0		PINMUX_PIN(PIN_PC11, 6, 4)
+#define PIN_PC12			76
+#define PIN_PC12__GPIO			PINMUX_PIN(PIN_PC12, 0, 0)
+#define PIN_PC12__I2SMCC1_WS		PINMUX_PIN(PIN_PC12, 1, 1)
+#define PIN_PC12__FLEXCOM8_IO2		PINMUX_PIN(PIN_PC12, 2, 2)
+#define PIN_PC12__FLEXCOM2_IO1		PINMUX_PIN(PIN_PC12, 6, 4)
+#define PIN_PC13			77
+#define PIN_PC13__GPIO			PINMUX_PIN(PIN_PC13, 0, 0)
+#define PIN_PC13__I2SMCC1_MCK		PINMUX_PIN(PIN_PC13, 1, 1)
+#define PIN_PC13__FLEXCOM8_IO1		PINMUX_PIN(PIN_PC13, 2, 2)
+#define PIN_PC13__FLEXCOM3_IO0		PINMUX_PIN(PIN_PC13, 6, 4)
+#define PIN_PC14			78
+#define PIN_PC14__GPIO			PINMUX_PIN(PIN_PC14, 0, 0)
+#define PIN_PC14__I2SMCC1_DOUT0		PINMUX_PIN(PIN_PC14, 1, 1)
+#define PIN_PC14__FLEXCOM8_IO0		PINMUX_PIN(PIN_PC14, 2, 2)
+#define PIN_PC14__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC14, 6, 4)
+#define PIN_PC15			79
+#define PIN_PC15__GPIO			PINMUX_PIN(PIN_PC15, 0, 0)
+#define PIN_PC15__I2SMCC1_DOUT1		PINMUX_PIN(PIN_PC15, 1, 1)
+#define PIN_PC15__FLEXCOM8_IO3		PINMUX_PIN(PIN_PC15, 2, 2)
+#define PIN_PC15__FLEXCOM4_IO0		PINMUX_PIN(PIN_PC15, 6, 4)
+#define PIN_PC16			80
+#define PIN_PC16__GPIO			PINMUX_PIN(PIN_PC16, 0, 0)
+#define PIN_PC16__I2SMCC1_DOUT2		PINMUX_PIN(PIN_PC16, 1, 1)
+#define PIN_PC16__FLEXCOM8_IO4		PINMUX_PIN(PIN_PC16, 2, 2)
+#define PIN_PC16__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC16, 6, 4)
+#define PIN_PC17			81
+#define PIN_PC17__GPIO			PINMUX_PIN(PIN_PC17, 0, 0)
+#define PIN_PC17__I2SMCC1_DOUT3		PINMUX_PIN(PIN_PC17, 1, 1)
+#define PIN_PC17__EXT_IRQ0		PINMUX_PIN(PIN_PC17, 2, 3)
+#define PIN_PC17__FLEXCOM5_IO0		PINMUX_PIN(PIN_PC17, 6, 4)
+#define PIN_PC18			82
+#define PIN_PC18__GPIO			PINMUX_PIN(PIN_PC18, 0, 0)
+#define PIN_PC18__I2SMCC1_DIN0		PINMUX_PIN(PIN_PC18, 1, 1)
+#define PIN_PC18__FLEXCOM9_IO0		PINMUX_PIN(PIN_PC18, 2, 2)
+#define PIN_PC18__FLEXCOM5_IO1		PINMUX_PIN(PIN_PC18, 6, 4)
+#define PIN_PC19			83
+#define PIN_PC19__GPIO			PINMUX_PIN(PIN_PC19, 0, 0)
+#define PIN_PC19__I2SMCC1_DIN1		PINMUX_PIN(PIN_PC19, 1, 1)
+#define PIN_PC19__FLEXCOM9_IO1		PINMUX_PIN(PIN_PC19, 2, 2)
+#define PIN_PC19__FLEXCOM6_IO0		PINMUX_PIN(PIN_PC19, 6, 4)
+#define PIN_PC20			84
+#define PIN_PC20__GPIO			PINMUX_PIN(PIN_PC20, 0, 0)
+#define PIN_PC20__I2SMCC1_DIN2		PINMUX_PIN(PIN_PC20, 1, 1)
+#define PIN_PC20__FLEXCOM9_IO4		PINMUX_PIN(PIN_PC20, 2, 2)
+#define PIN_PC20__FLEXCOM6_IO1		PINMUX_PIN(PIN_PC20, 6, 4)
+#define PIN_PC21			85
+#define PIN_PC21__GPIO			PINMUX_PIN(PIN_PC21, 0, 0)
+#define PIN_PC21__I2SMCC1_DIN3		PINMUX_PIN(PIN_PC21, 1, 1)
+#define PIN_PC21__FLEXCOM9_IO2		PINMUX_PIN(PIN_PC21, 2, 2)
+#define PIN_PC21__D3			PINMUX_PIN(PIN_PC21, 4, 2)
+#define PIN_PC21__FLEXCOM6_IO0		PINMUX_PIN(PIN_PC21, 6, 5)
+#define PIN_PC22			86
+#define PIN_PC22__GPIO			PINMUX_PIN(PIN_PC22, 0, 0)
+#define PIN_PC22__I2SMCC0_DIN2		PINMUX_PIN(PIN_PC22, 1, 1)
+#define PIN_PC22__FLEXCOM9_IO3		PINMUX_PIN(PIN_PC22, 2, 2)
+#define PIN_PC22__D4			PINMUX_PIN(PIN_PC22, 4, 2)
+#define PIN_PC22__FLEXCOM6_IO1		PINMUX_PIN(PIN_PC22, 6, 5)
+#define PIN_PC23			87
+#define PIN_PC23__GPIO			PINMUX_PIN(PIN_PC23, 0, 0)
+#define PIN_PC23__I2SMCC0_DIN3		PINMUX_PIN(PIN_PC23, 1, 1)
+#define PIN_PC23__FLEXCOM0_IO5		PINMUX_PIN(PIN_PC23, 2, 3)
+#define PIN_PC23__D5			PINMUX_PIN(PIN_PC23, 4, 2)
+#define PIN_PC23__FLEXCOM7_IO0		PINMUX_PIN(PIN_PC23, 6, 5)
+#define PIN_PC24			88
+#define PIN_PC24__GPIO			PINMUX_PIN(PIN_PC24, 0, 0)
+#define PIN_PC24__FLEXCOM0_IO6		PINMUX_PIN(PIN_PC24, 2, 3)
+#define PIN_PC24__EXT_IRQ1		PINMUX_PIN(PIN_PC24, 3, 3)
+#define PIN_PC24__D6			PINMUX_PIN(PIN_PC24, 4, 2)
+#define PIN_PC24__FLEXCOM7_IO1		PINMUX_PIN(PIN_PC24, 6, 5)
+#define PIN_PC25			89
+#define PIN_PC25__GPIO			PINMUX_PIN(PIN_PC25, 0, 0)
+#define PIN_PC25__NTRST			PINMUX_PIN(PIN_PC25, 1, 1)
+#define PIN_PC26			90
+#define PIN_PC26__GPIO			PINMUX_PIN(PIN_PC26, 0, 0)
+#define PIN_PC26__TCK_SWCLK		PINMUX_PIN(PIN_PC26, 1, 1)
+#define PIN_PC27			91
+#define PIN_PC27__GPIO			PINMUX_PIN(PIN_PC27, 0, 0)
+#define PIN_PC27__TMS_SWDIO		PINMUX_PIN(PIN_PC27, 1, 1)
+#define PIN_PC28			92
+#define PIN_PC28__GPIO			PINMUX_PIN(PIN_PC28, 0, 0)
+#define PIN_PC28__TDI			PINMUX_PIN(PIN_PC28, 1, 1)
+#define PIN_PC29			93
+#define PIN_PC29__GPIO			PINMUX_PIN(PIN_PC29, 0, 0)
+#define PIN_PC29__TDO			PINMUX_PIN(PIN_PC29, 1, 1)
+#define PIN_PC30			94
+#define PIN_PC30__GPIO			PINMUX_PIN(PIN_PC30, 0, 0)
+#define PIN_PC30__FLEXCOM10_IO0		PINMUX_PIN(PIN_PC30, 2, 2)
+#define PIN_PC31			95
+#define PIN_PC31__GPIO			PINMUX_PIN(PIN_PC31, 0, 0)
+#define PIN_PC31__FLEXCOM10_IO1		PINMUX_PIN(PIN_PC31, 2, 2)
+#define PIN_PD0				96
+#define PIN_PD0__GPIO			PINMUX_PIN(PIN_PD0, 0, 0)
+#define PIN_PD0__FLEXCOM11_IO0		PINMUX_PIN(PIN_PD0, 2, 2)
+#define PIN_PD1				97
+#define PIN_PD1__GPIO			PINMUX_PIN(PIN_PD1, 0, 0)
+#define PIN_PD1__FLEXCOM11_IO1		PINMUX_PIN(PIN_PD1, 2, 2)
+#define PIN_PD2				98
+#define PIN_PD2__GPIO			PINMUX_PIN(PIN_PD2, 0, 0)
+#define PIN_PD2__SDMMC2_RSTN		PINMUX_PIN(PIN_PD2, 1, 1)
+#define PIN_PD2__PCK0			PINMUX_PIN(PIN_PD2, 2, 2)
+#define PIN_PD2__CANTX4			PINMUX_PIN(PIN_PD2, 3, 1)
+#define PIN_PD2__D7			PINMUX_PIN(PIN_PD2, 4, 2)
+#define PIN_PD2__TIOA0			PINMUX_PIN(PIN_PD2, 5, 2)
+#define PIN_PD2__FLEXCOM8_IO0		PINMUX_PIN(PIN_PD2, 6, 5)
+#define PIN_PD3				99
+#define PIN_PD3__GPIO			PINMUX_PIN(PIN_PD3, 0, 0)
+#define PIN_PD3__SDMMC2_CMD		PINMUX_PIN(PIN_PD3, 1, 1)
+#define PIN_PD3__FLEXCOM0_IO0		PINMUX_PIN(PIN_PD3, 2, 2)
+#define PIN_PD3__CANRX4			PINMUX_PIN(PIN_PD3, 3, 1)
+#define PIN_PD3__NANDRDY		PINMUX_PIN(PIN_PD3, 4, 2)
+#define PIN_PD3__TIOB0			PINMUX_PIN(PIN_PD3, 5, 2)
+#define PIN_PD3__FLEXCOM8_IO1		PINMUX_PIN(PIN_PD3, 6, 5)
+#define PIN_PD4				100
+#define PIN_PD4__GPIO			PINMUX_PIN(PIN_PD4, 0, 0)
+#define PIN_PD4__SDMMC2_CK		PINMUX_PIN(PIN_PD4, 1, 1)
+#define PIN_PD4__FLEXCOM0_IO1		PINMUX_PIN(PIN_PD4, 2, 2)
+#define PIN_PD4__CANTX5			PINMUX_PIN(PIN_PD4, 3, 1)
+#define PIN_PD4__NCS3_NANDCS		PINMUX_PIN(PIN_PD4, 4, 2)
+#define PIN_PD4__TCLK0			PINMUX_PIN(PIN_PD4, 5, 2)
+#define PIN_PD4__FLEXCOM9_IO0		PINMUX_PIN(PIN_PD4, 6, 5)
+#define PIN_PD5				101
+#define PIN_PD5__GPIO			PINMUX_PIN(PIN_PD5, 0, 0)
+#define PIN_PD5__SDMMC2_DAT0		PINMUX_PIN(PIN_PD5, 1, 1)
+#define PIN_PD5__FLEXCOM0_IO2		PINMUX_PIN(PIN_PD5, 2, 2)
+#define PIN_PD5__CANRX5			PINMUX_PIN(PIN_PD5, 3, 1)
+#define PIN_PD5__NWE_NWR0_NANDWE	PINMUX_PIN(PIN_PD5, 4, 2)
+#define PIN_PD5__TIOA1			PINMUX_PIN(PIN_PD5, 5, 2)
+#define PIN_PD5__FLEXCOM9_IO1		PINMUX_PIN(PIN_PD5, 6, 5)
+#define PIN_PD6				102
+#define PIN_PD6__GPIO			PINMUX_PIN(PIN_PD6, 0, 0)
+#define PIN_PD6__SDMMC2_DAT1		PINMUX_PIN(PIN_PD6, 1, 1)
+#define PIN_PD6__FLEXCOM0_IO3		PINMUX_PIN(PIN_PD6, 2, 2)
+#define PIN_PD6__SPDIF_RX		PINMUX_PIN(PIN_PD6, 3, 3)
+#define PIN_PD6__NRD_NANDOE		PINMUX_PIN(PIN_PD6, 4, 2)
+#define PIN_PD6__TIOB1			PINMUX_PIN(PIN_PD6, 5, 2)
+#define PIN_PD6__FLEXCOM10_IO0		PINMUX_PIN(PIN_PD6, 6, 5)
+#define PIN_PD7				103
+#define PIN_PD7__GPIO			PINMUX_PIN(PIN_PD7, 0, 0)
+#define PIN_PD7__SDMMC2_DAT2		PINMUX_PIN(PIN_PD7, 1, 1)
+#define PIN_PD7__FLEXCOM0_IO4		PINMUX_PIN(PIN_PD7, 2, 2)
+#define PIN_PD7__SPDIF_TX		PINMUX_PIN(PIN_PD7, 2, 2)
+#define PIN_PD7__A21_NANDALE		PINMUX_PIN(PIN_PD7, 4, 2)
+#define PIN_PD7__TCLK1			PINMUX_PIN(PIN_PD7, 5, 2)
+#define PIN_PD7__FLEXCOM10_IO1		PINMUX_PIN(PIN_PD7, 6, 5)
+#define PIN_PD8				104
+#define PIN_PD8__GPIO			PINMUX_PIN(PIN_PD8, 0, 0)
+#define PIN_PD8__SDMMC2_DAT3		PINMUX_PIN(PIN_PD8, 1, 1)
+#define PIN_PD8__I2SMCC0_DIN0		PINMUX_PIN(PIN_PD8, 3, 1)
+#define PIN_PD8__A22_NANDCLE		PINMUX_PIN(PIN_PD8, 4, 2)
+#define PIN_PD8__TIOA2			PINMUX_PIN(PIN_PD8, 5, 2)
+#define PIN_PD8__FLEXCOM11_IO0		PINMUX_PIN(PIN_PD8, 6, 5)
+#define PIN_PD9				105
+#define PIN_PD9__GPIO			PINMUX_PIN(PIN_PD9, 0, 0)
+#define PIN_PD9__SDMMC2_WP		PINMUX_PIN(PIN_PD9, 1, 1)
+#define PIN_PD9__I2SMCC0_DIN1		PINMUX_PIN(PIN_PD9, 3, 2)
+#define PIN_PD9__D0			PINMUX_PIN(PIN_PD9, 4, 2)
+#define PIN_PD9__TIOB2			PINMUX_PIN(PIN_PD9, 5, 2)
+#define PIN_PD9__FLEXCOM11_IO1		PINMUX_PIN(PIN_PD9, 6, 5)
+#define PIN_PD10			106
+#define PIN_PD10__GPIO			PINMUX_PIN(PIN_PD10, 0, 0)
+#define PIN_PD10__SDMMC2_CD		PINMUX_PIN(PIN_PD10, 1, 1)
+#define PIN_PD10__PCK6			PINMUX_PIN(PIN_PD10, 2, 2)
+#define PIN_PD10__I2SMCC0_DIN2		PINMUX_PIN(PIN_PD10, 3, 2)
+#define PIN_PD10__D1			PINMUX_PIN(PIN_PD10, 4, 2)
+#define PIN_PD10__TCLK2			PINMUX_PIN(PIN_PD10, 5, 2)
+#define PIN_PD10__FLEXCOM0_IO0		PINMUX_PIN(PIN_PD10, 6, 3)
+#define PIN_PD11			107
+#define PIN_PD11__GPIO			PINMUX_PIN(PIN_PD11, 0, 0)
+#define PIN_PD11__SDMMC2_1V8SEL		PINMUX_PIN(PIN_PD11, 1, 1)
+#define PIN_PD11__PCK7			PINMUX_PIN(PIN_PD11, 2, 2)
+#define PIN_PD11__I2SMCC0_DIN3		PINMUX_PIN(PIN_PD11, 3, 2)
+#define PIN_PD11__D2			PINMUX_PIN(PIN_PD11, 4, 2)
+#define PIN_PD11__TIOA3			PINMUX_PIN(PIN_PD11, 5, 2)
+#define PIN_PD11__FLEXCOM0_IO1		PINMUX_PIN(PIN_PD11, 6, 3)
+#define PIN_PD12			108
+#define PIN_PD12__GPIO			PINMUX_PIN(PIN_PD12, 0, 0)
+#define PIN_PD12__PCK1			PINMUX_PIN(PIN_PD12, 1, 2)
+#define PIN_PD12__FLEXCOM1_IO0		PINMUX_PIN(PIN_PD12, 2, 2)
+#define PIN_PD12__CANTX0		PINMUX_PIN(PIN_PD12, 4, 2)
+#define PIN_PD12__TIOB3			PINMUX_PIN(PIN_PD12, 5, 2)
+#define PIN_PD13			109
+#define PIN_PD13__GPIO			PINMUX_PIN(PIN_PD13, 0, 0)
+#define PIN_PD13__I2SMCC0_CK		PINMUX_PIN(PIN_PD13, 1, 2)
+#define PIN_PD13__FLEXCOM1_IO1		PINMUX_PIN(PIN_PD13, 2, 2)
+#define PIN_PD13__PWML0			PINMUX_PIN(PIN_PD13, 3, 4)
+#define PIN_PD13__CANRX0		PINMUX_PIN(PIN_PD13, 4, 2)
+#define PIN_PD13__TCLK3			PINMUX_PIN(PIN_PD13, 5, 2)
+#define PIN_PD14			110
+#define PIN_PD14__GPIO			PINMUX_PIN(PIN_PD14, 0, 0)
+#define PIN_PD14__I2SMCC0_MCK		PINMUX_PIN(PIN_PD14, 1, 2)
+#define PIN_PD14__FLEXCOM1_IO2		PINMUX_PIN(PIN_PD14, 2, 2)
+#define PIN_PD14__PWMH0			PINMUX_PIN(PIN_PD14, 3, 4)
+#define PIN_PD14__CANTX1		PINMUX_PIN(PIN_PD14, 4, 2)
+#define PIN_PD14__TIOA4			PINMUX_PIN(PIN_PD14, 5, 2)
+#define PIN_PD14__FLEXCOM2_IO0		PINMUX_PIN(PIN_PD14, 6, 5)
+#define PIN_PD15			111
+#define PIN_PD15__GPIO			PINMUX_PIN(PIN_PD15, 0, 0)
+#define PIN_PD15__I2SMCC0_WS		PINMUX_PIN(PIN_PD15, 1, 2)
+#define PIN_PD15__FLEXCOM1_IO3		PINMUX_PIN(PIN_PD15, 2, 2)
+#define PIN_PD15__PWML1			PINMUX_PIN(PIN_PD15, 3, 4)
+#define PIN_PD15__CANRX1		PINMUX_PIN(PIN_PD15, 4, 2)
+#define PIN_PD15__TIOB4			PINMUX_PIN(PIN_PD15, 5, 2)
+#define PIN_PD15__FLEXCOM2_IO1		PINMUX_PIN(PIN_PD15, 6, 5)
+#define PIN_PD16			112
+#define PIN_PD16__GPIO			PINMUX_PIN(PIN_PD16, 0, 0)
+#define PIN_PD16__I2SMCC0_DOUT0		PINMUX_PIN(PIN_PD16, 1, 2)
+#define PIN_PD16__FLEXCOM1_IO4		PINMUX_PIN(PIN_PD16, 2, 2)
+#define PIN_PD16__PWMH1			PINMUX_PIN(PIN_PD16, 3, 4)
+#define PIN_PD16__CANTX2		PINMUX_PIN(PIN_PD16, 4, 2)
+#define PIN_PD16__TCLK4			PINMUX_PIN(PIN_PD16, 5, 2)
+#define PIN_PD16__FLEXCOM3_IO0		PINMUX_PIN(PIN_PD16, 6, 5)
+#define PIN_PD17			113
+#define PIN_PD17__GPIO			PINMUX_PIN(PIN_PD17, 0, 0)
+#define PIN_PD17__I2SMCC0_DOUT1		PINMUX_PIN(PIN_PD17, 1, 2)
+#define PIN_PD17__FLEXCOM2_IO0		PINMUX_PIN(PIN_PD17, 2, 2)
+#define PIN_PD17__PWML2			PINMUX_PIN(PIN_PD17, 3, 4)
+#define PIN_PD17__CANRX2		PINMUX_PIN(PIN_PD17, 4, 2)
+#define PIN_PD17__TIOA5			PINMUX_PIN(PIN_PD17, 5, 2)
+#define PIN_PD17__FLEXCOM3_IO1		PINMUX_PIN(PIN_PD17, 6, 5)
+#define PIN_PD18			114
+#define PIN_PD18__GPIO			PINMUX_PIN(PIN_PD18, 0, 0)
+#define PIN_PD18__I2SMCC0_DOUT2		PINMUX_PIN(PIN_PD18, 1, 2)
+#define PIN_PD18__FLEXCOM2_IO1		PINMUX_PIN(PIN_PD18, 2, 2)
+#define PIN_PD18__PWMH2			PINMUX_PIN(PIN_PD18, 3, 4)
+#define PIN_PD18__CANTX3		PINMUX_PIN(PIN_PD18, 4, 2)
+#define PIN_PD18__TIOB5			PINMUX_PIN(PIN_PD18, 5, 2)
+#define PIN_PD18__FLEXCOM4_IO0		PINMUX_PIN(PIN_PD18, 6, 5)
+#define PIN_PD19			115
+#define PIN_PD19__GPIO			PINMUX_PIN(PIN_PD19, 0, 0)
+#define PIN_PD19__I2SMCC0_DOUT3		PINMUX_PIN(PIN_PD19, 1, 2)
+#define PIN_PD19__FLEXCOM2_IO2		PINMUX_PIN(PIN_PD19, 2, 2)
+#define PIN_PD19__PWML3			PINMUX_PIN(PIN_PD19, 3, 4)
+#define PIN_PD19__CANRX3		PINMUX_PIN(PIN_PD19, 4, 2)
+#define PIN_PD19__TCLK5			PINMUX_PIN(PIN_PD19, 5, 2)
+#define PIN_PD19__FLEXCOM4_IO1		PINMUX_PIN(PIN_PD19, 6, 5)
+#define PIN_PD20			116
+#define PIN_PD20__GPIO			PINMUX_PIN(PIN_PD20, 0, 0)
+#define PIN_PD20__PCK0			PINMUX_PIN(PIN_PD20, 1, 3)
+#define PIN_PD20__FLEXCOM2_IO3		PINMUX_PIN(PIN_PD20, 2, 2)
+#define PIN_PD20__PWMH3			PINMUX_PIN(PIN_PD20, 3, 4)
+#define PIN_PD20__CANTX4		PINMUX_PIN(PIN_PD20, 4, 2)
+#define PIN_PD20__FLEXCOM5_IO0		PINMUX_PIN(PIN_PD20, 6, 5)
+#define PIN_PD21			117
+#define PIN_PD21__GPIO			PINMUX_PIN(PIN_PD21, 0, 0)
+#define PIN_PD21__PCK1			PINMUX_PIN(PIN_PD21, 1, 3)
+#define PIN_PD21__FLEXCOM2_IO4		PINMUX_PIN(PIN_PD21, 2, 2)
+#define PIN_PD21__CANRX4		PINMUX_PIN(PIN_PD21, 4, 2)
+#define PIN_PD21__FLEXCOM5_IO1		PINMUX_PIN(PIN_PD21, 6, 5)
+#define PIN_PD21__G1_TXEN		PINMUX_PIN(PIN_PD21, 7, 1)
+#define PIN_PD22			118
+#define PIN_PD22__GPIO			PINMUX_PIN(PIN_PD22, 0, 0)
+#define PIN_PD22__PDMC0_CLK		PINMUX_PIN(PIN_PD22, 1, 2)
+#define PIN_PD22__PWMEXTRG0		PINMUX_PIN(PIN_PD22, 3, 4)
+#define PIN_PD22__RD1			PINMUX_PIN(PIN_PD22, 4, 2)
+#define PIN_PD22__CANTX5		PINMUX_PIN(PIN_PD22, 6, 2)
+#define PIN_PD22__G1_TX0		PINMUX_PIN(PIN_PD22, 7, 1)
+#define PIN_PD23			119
+#define PIN_PD23__GPIO			PINMUX_PIN(PIN_PD23, 0, 0)
+#define PIN_PD23__PDMC0_DS0		PINMUX_PIN(PIN_PD23, 1, 2)
+#define PIN_PD23__PWMEXTRG1		PINMUX_PIN(PIN_PD23, 3, 4)
+#define PIN_PD23__RF1			PINMUX_PIN(PIN_PD23, 4, 2)
+#define PIN_PD23__ISC_MCK		PINMUX_PIN(PIN_PD23, 5, 2)
+#define PIN_PD23__CANRX5		PINMUX_PIN(PIN_PD23, 6, 2)
+#define PIN_PD23__G1_TX1		PINMUX_PIN(PIN_PD23, 7, 1)
+#define PIN_PD24			120
+#define PIN_PD24__GPIO			PINMUX_PIN(PIN_PD24, 0, 0)
+#define PIN_PD24__PDMC0_DS1		PINMUX_PIN(PIN_PD24, 1, 2)
+#define PIN_PD24__PWMFI0		PINMUX_PIN(PIN_PD24, 3, 4)
+#define PIN_PD24__RK1			PINMUX_PIN(PIN_PD24, 4, 2)
+#define PIN_PD24__ISC_D0		PINMUX_PIN(PIN_PD24, 5, 2)
+#define PIN_PD24__G1_RXDV		PINMUX_PIN(PIN_PD24, 7, 1)
+#define PIN_PD25			121
+#define PIN_PD25__GPIO			PINMUX_PIN(PIN_PD25, 0, 0)
+#define PIN_PD25__PDMC1_CLK		PINMUX_PIN(PIN_PD25, 1, 2)
+#define PIN_PD25__FLEXCOM5_IO0		PINMUX_PIN(PIN_PD25, 2, 2)
+#define PIN_PD25__PWMFI1		PINMUX_PIN(PIN_PD25, 3, 4)
+#define PIN_PD25__TD1			PINMUX_PIN(PIN_PD25, 4, 2)
+#define PIN_PD25__ISC_D1		PINMUX_PIN(PIN_PD25, 5, 2)
+#define PIN_PD25__G1_RX0		PINMUX_PIN(PIN_PD25, 7, 1)
+#define PIN_PD26			122
+#define PIN_PD26__GPIO			PINMUX_PIN(PIN_PD26, 0, 0)
+#define PIN_PD26__PDMC1_DS0		PINMUX_PIN(PIN_PD26, 1, 2)
+#define PIN_PD26__FLEXCOM5_IO1		PINMUX_PIN(PIN_PD26, 2, 2)
+#define PIN_PD26__ADTRG			PINMUX_PIN(PIN_PD26, 3, 3)
+#define PIN_PD26__TF1			PINMUX_PIN(PIN_PD26, 4, 2)
+#define PIN_PD26__ISC_D2		PINMUX_PIN(PIN_PD26, 5, 2)
+#define PIN_PD26__G1_RX1		PINMUX_PIN(PIN_PD26, 7, 1)
+#define PIN_PD27			123
+#define PIN_PD27__GPIO			PINMUX_PIN(PIN_PD27, 0, 0)
+#define PIN_PD27__PDMC1_DS1		PINMUX_PIN(PIN_PD27, 1, 2)
+#define PIN_PD27__FLEXCOM5_IO2		PINMUX_PIN(PIN_PD27, 2, 2)
+#define PIN_PD27__TIOA0			PINMUX_PIN(PIN_PD27, 3, 3)
+#define PIN_PD27__TK1			PINMUX_PIN(PIN_PD27, 4, 2)
+#define PIN_PD27__ISC_D3		PINMUX_PIN(PIN_PD27, 5, 2)
+#define PIN_PD27__G1_RXER		PINMUX_PIN(PIN_PD27, 7, 1)
+#define PIN_PD28			124
+#define PIN_PD28__GPIO			PINMUX_PIN(PIN_PD28, 0, 0)
+#define PIN_PD28__RD0			PINMUX_PIN(PIN_PD28, 1, 2)
+#define PIN_PD28__FLEXCOM5_IO3		PINMUX_PIN(PIN_PD28, 2, 2)
+#define PIN_PD28__TIOB0			PINMUX_PIN(PIN_PD28, 3, 3)
+#define PIN_PD28__I2SMCC1_CK		PINMUX_PIN(PIN_PD28, 4, 2)
+#define PIN_PD28__ISC_D4		PINMUX_PIN(PIN_PD28, 5, 2)
+#define PIN_PD28__PWML3			PINMUX_PIN(PIN_PD28, 6, 5)
+#define PIN_PD28__G1_MDC		PINMUX_PIN(PIN_PD28, 7, 1)
+#define PIN_PD29			125
+#define PIN_PD29__GPIO			PINMUX_PIN(PIN_PD29, 0, 0)
+#define PIN_PD29__RF0			PINMUX_PIN(PIN_PD29, 1, 2)
+#define PIN_PD29__FLEXCOM5_IO4		PINMUX_PIN(PIN_PD29, 2, 2)
+#define PIN_PD29__TCLK0			PINMUX_PIN(PIN_PD29, 3, 3)
+#define PIN_PD29__I2SMCC1_WS		PINMUX_PIN(PIN_PD29, 4, 2)
+#define PIN_PD29__ISC_D5		PINMUX_PIN(PIN_PD29, 5, 2)
+#define PIN_PD29__PWMH3			PINMUX_PIN(PIN_PD29, 6, 5)
+#define PIN_PD29__G1_MDIO		PINMUX_PIN(PIN_PD29, 7, 1)
+#define PIN_PD30			126
+#define PIN_PD30__GPIO			PINMUX_PIN(PIN_PD30, 0, 0)
+#define PIN_PD30__RK0			PINMUX_PIN(PIN_PD30, 1, 2)
+#define PIN_PD30__FLEXCOM6_IO0		PINMUX_PIN(PIN_PD30, 2, 2)
+#define PIN_PD30__TIOA1			PINMUX_PIN(PIN_PD30, 3, 3)
+#define PIN_PD30__I2SMCC1_MCK		PINMUX_PIN(PIN_PD30, 4, 2)
+#define PIN_PD30__ISC_D6		PINMUX_PIN(PIN_PD30, 5, 2)
+#define PIN_PD30__PWMEXTRG0		PINMUX_PIN(PIN_PD30, 6, 5)
+#define PIN_PD30__G1_TXCK		PINMUX_PIN(PIN_PD30, 7, 1)
+#define PIN_PD31			127
+#define PIN_PD31__GPIO			PINMUX_PIN(PIN_PD31, 0, 0)
+#define PIN_PD31__TD0			PINMUX_PIN(PIN_PD31, 1, 2)
+#define PIN_PD31__FLEXCOM6_IO1		PINMUX_PIN(PIN_PD31, 2, 2)
+#define PIN_PD31__TIOB1			PINMUX_PIN(PIN_PD31, 3, 3)
+#define PIN_PD31__I2SMCC1_DOUT0		PINMUX_PIN(PIN_PD31, 4, 2)
+#define PIN_PD31__ISC_D7		PINMUX_PIN(PIN_PD31, 5, 2)
+#define PIN_PD31__PWM_EXTRG1		PINMUX_PIN(PIN_PD31, 6, 5)
+#define PIN_PD31__G1_TX2		PINMUX_PIN(PIN_PD31, 7, 1)
+#define PIN_PE0				128
+#define PIN_PE0__GPIO			PINMUX_PIN(PIN_PE0, 0, 0)
+#define PIN_PE0__TF0			PINMUX_PIN(PIN_PE0, 1, 2)
+#define PIN_PE0__FLEXCOM6_IO2		PINMUX_PIN(PIN_PE0, 2, 2)
+#define PIN_PE0__TCLK1			PINMUX_PIN(PIN_PE0, 3, 3)
+#define PIN_PE0__I2SMCC1_DOUT1		PINMUX_PIN(PIN_PE0, 4, 2)
+#define PIN_PE0__ISC_HSYNC		PINMUX_PIN(PIN_PE0, 5, 2)
+#define PIN_PE0__PWMFI0			PINMUX_PIN(PIN_PE0, 6, 5)
+#define PIN_PE0__G1_TX3			PINMUX_PIN(PIN_PE0, 7, 1)
+#define PIN_PE1				129
+#define PIN_PE1__GPIO			PINMUX_PIN(PIN_PE1, 0, 0)
+#define PIN_PE1__TK0			PINMUX_PIN(PIN_PE1, 1, 2)
+#define PIN_PE1__FLEXCOM6_IO3		PINMUX_PIN(PIN_PE1, 2, 2)
+#define PIN_PE1__TIOA2			PINMUX_PIN(PIN_PE1, 3, 3)
+#define PIN_PE1__I2SMCC1_DOUT2		PINMUX_PIN(PIN_PE1, 4, 2)
+#define PIN_PE1__ISC_VSYNC		PINMUX_PIN(PIN_PE1, 5, 2)
+#define PIN_PE1__PWMFI1			PINMUX_PIN(PIN_PE1, 6, 5)
+#define PIN_PE1__G1_RX2			PINMUX_PIN(PIN_PE1, 7, 1)
+#define PIN_PE2				130
+#define PIN_PE2__GPIO			PINMUX_PIN(PIN_PE2, 0, 0)
+#define PIN_PE2__PWML0			PINMUX_PIN(PIN_PE2, 1, 5)
+#define PIN_PE2__FLEXCOM6_IO4		PINMUX_PIN(PIN_PE2, 2, 2)
+#define PIN_PE2__TIOB2			PINMUX_PIN(PIN_PE2, 3, 3)
+#define PIN_PE2__I2SMCC1_DOUT3		PINMUX_PIN(PIN_PE2, 4, 2)
+#define PIN_PE2__ISC_FIELD		PINMUX_PIN(PIN_PE2, 5, 2)
+#define PIN_PE2__G1_RX3			PINMUX_PIN(PIN_PE2, 7, 1)
+#define PIN_PE3				131
+#define PIN_PE3__GPIO			PINMUX_PIN(PIN_PE3, 0, 0)
+#define PIN_PE3__PWMH0			PINMUX_PIN(PIN_PE3, 1, 5)
+#define PIN_PE3__FLEXCOM0_IO0		PINMUX_PIN(PIN_PE3, 2, 4)
+#define PIN_PE3__TCLK2			PINMUX_PIN(PIN_PE3, 3, 3)
+#define PIN_PE3__I2SMCC1_DIN0		PINMUX_PIN(PIN_PE3, 4, 2)
+#define PIN_PE3__ISC_PCK		PINMUX_PIN(PIN_PE3, 5, 2)
+#define PIN_PE3__G1_RXCK		PINMUX_PIN(PIN_PE3, 7, 1)
+#define PIN_PE4				132
+#define PIN_PE4__GPIO			PINMUX_PIN(PIN_PE4, 0, 0)
+#define PIN_PE4__PWML1			PINMUX_PIN(PIN_PE4, 1, 5)
+#define PIN_PE4__FLEXCOM0_IO1		PINMUX_PIN(PIN_PE4, 2, 4)
+#define PIN_PE4__TIOA3			PINMUX_PIN(PIN_PE4, 3, 3)
+#define PIN_PE4__I2SMCC1_DIN1		PINMUX_PIN(PIN_PE4, 4, 2)
+#define PIN_PE4__ISC_D8			PINMUX_PIN(PIN_PE4, 5, 2)
+#define PIN_PE4__G1_TXER		PINMUX_PIN(PIN_PE4, 7, 1)
+#define PIN_PE5				133
+#define PIN_PE5__GPIO			PINMUX_PIN(PIN_PE5, 0, 0)
+#define PIN_PE5__PWMH1			PINMUX_PIN(PIN_PE5, 1, 5)
+#define PIN_PE5__FLEXCOM0_IO2		PINMUX_PIN(PIN_PE5, 2, 4)
+#define PIN_PE5__TIOB3			PINMUX_PIN(PIN_PE5, 3, 3)
+#define PIN_PE5__I2SMCC1_DIN2		PINMUX_PIN(PIN_PE5, 4, 2)
+#define PIN_PE5__ISC_D9			PINMUX_PIN(PIN_PE5, 5, 2)
+#define PIN_PE5__G1_COL			PINMUX_PIN(PIN_PE5, 7, 1)
+#define PIN_PE6				134
+#define PIN_PE6__GPIO			PINMUX_PIN(PIN_PE6, 0, 0)
+#define PIN_PE6__PWML2			PINMUX_PIN(PIN_PE6, 1, 5)
+#define PIN_PE6__FLEXCOM0_IO3		PINMUX_PIN(PIN_PE6, 2, 4)
+#define PIN_PE6__TCLK3			PINMUX_PIN(PIN_PE6, 3, 3)
+#define PIN_PE6__I2SMCC1_DIN3		PINMUX_PIN(PIN_PE6, 4, 2)
+#define PIN_PE6__ISC_D10		PINMUX_PIN(PIN_PE6, 5, 2)
+#define PIN_PE6__G1_CRS			PINMUX_PIN(PIN_PE6, 7, 1)
+#define PIN_PE7				135
+#define PIN_PE7__GPIO			PINMUX_PIN(PIN_PE7, 0, 0)
+#define PIN_PE7__PWMH2			PINMUX_PIN(PIN_PE7, 1, 5)
+#define PIN_PE7__FLEXCOM0_IO4		PINMUX_PIN(PIN_PE7, 2, 4)
+#define PIN_PE7__TIOA4			PINMUX_PIN(PIN_PE7, 3, 3)
+#define PIN_PE7__ISC_D11		PINMUX_PIN(PIN_PE7, 5, 2)
+#define PIN_PE7__G1_TSUCOMP		PINMUX_PIN(PIN_PE7, 7, 1)
diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi
new file mode 100644
index 000000000000..03ef3d9aaeec
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi
@@ -0,0 +1,1053 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *  sama7g5.dtsi - Device Tree Include file for SAMA7G5 family SoC
+ *
+ *  Copyright (C) 2020 Microchip Technology, Inc. and its subsidiaries
+ *
+ *  Author: Eugen Hristev <eugen.hristev@microchip.com>
+ *  Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ *
+ */
+
+#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/nvmem/microchip,sama7g5-otpc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	model = "Microchip SAMA7G5 family SoC";
+	compatible = "microchip,sama7g5";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			d-cache-size = <0x8000>;	// L1, 32 KB
+			i-cache-size = <0x8000>;	// L1, 32 KB
+			next-level-cache = <&L2>;
+
+			L2: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x40000>; // L2, 256 KB
+				cache-unified;
+			};
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-90000000 {
+			opp-hz = /bits/ 64 <90000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+			opp-suspend;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1150000 1125000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-1000000002 {
+			opp-hz = /bits/ 64 <1000000002>;
+			opp-microvolt = <1250000 1225000 1300000>;
+			clock-latency-ns = <320000>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&thermal_sensor>;
+
+			trips {
+				cpu_normal: cpu-alert0 {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu_hot: cpu-alert1 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_normal>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	clocks {
+		slow_xtal: clock-slowxtal {
+			compatible = "fixed-clock";
+			clock-output-names = "slow_xtal";
+			#clock-cells = <0>;
+		};
+
+		main_xtal: clock-mainxtal {
+			compatible = "fixed-clock";
+			clock-output-names = "main_xtal";
+			#clock-cells = <0>;
+		};
+
+		usb_clk: clock-usbclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "usb_clk";
+			clock-frequency = <48000000>;
+		};
+	};
+
+	vddout25: fixed-regulator-vddout25 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDDOUT25";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-boot-on;
+		status = "disabled";
+	};
+
+	ns_sram: sram@100000 {
+		compatible = "mmio-sram";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x100000 0x20000>;
+		ranges;
+	};
+
+	thermal_sensor: thermal-sensor {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc AT91_SAMA7G5_ADC_TEMP_CHANNEL>;
+		io-channel-names = "sensor-channel";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		nfc_sram: sram@600000 {
+			compatible = "mmio-sram";
+			no-memory-wc;
+			reg = <0x00600000 0x2400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x00600000 0x2400>;
+		};
+
+		nfc_io: nfc-io@10000000 {
+			compatible = "atmel,sama5d3-nfc-io", "syscon";
+			reg = <0x10000000 0x8000000>;
+		};
+
+		ebi: ebi@40000000 {
+			compatible = "atmel,sama5d3-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&hsmc>;
+			reg = <0x40000000 0x20000000>;
+			ranges = <0x0 0x0 0x40000000 0x8000000
+				  0x1 0x0 0x48000000 0x8000000
+				  0x2 0x0 0x50000000 0x8000000
+				  0x3 0x0 0x58000000 0x8000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK1>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,sama5d3-nand-controller";
+				atmel,nfc-sram = <&nfc_sram>;
+				atmel,nfc-io = <&nfc_io>;
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		securam: sram@e0000000 {
+			compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram";
+			reg = <0xe0000000 0x4000>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xe0000000 0x4000>;
+			no-memory-wc;
+		};
+
+		secumod: secumod@e0004000 {
+			compatible = "microchip,sama7g5-secumod", "atmel,sama5d2-secumod", "syscon";
+			reg = <0xe0004000 0x4000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		sfrbu: sfr@e0008000 {
+			compatible = "microchip,sama7g5-sfrbu", "atmel,sama5d2-sfrbu", "syscon";
+			reg = <0xe0008000 0x20>;
+		};
+
+		pioA: pinctrl@e0014000 {
+			compatible = "microchip,sama7g5-pinctrl";
+			reg = <0xe0014000 0x800>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+		};
+
+		pmc: clock-controller@e0018000 {
+			compatible = "microchip,sama7g5-pmc", "syscon";
+			reg = <0xe0018000 0x200>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#clock-cells = <2>;
+			clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+			clock-names = "td_slck", "md_slck", "main_xtal";
+		};
+
+		reset_controller: reset-controller@e001d000 {
+			compatible = "microchip,sama7g5-rstc";
+			reg = <0xe001d000 0xc>, <0xe001d0e4 0x4>;
+			#reset-cells = <1>;
+			clocks = <&clk32k 0>;
+		};
+
+		shdwc: poweroff@e001d010 {
+			compatible = "microchip,sama7g5-shdwc", "syscon";
+			reg = <0xe001d010 0x10>;
+			clocks = <&clk32k 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			atmel,wakeup-rtc-timer;
+			atmel,wakeup-rtt-timer;
+			status = "disabled";
+		};
+
+		rtt: rtc@e001d020 {
+			compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
+			reg = <0xe001d020 0x30>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 1>;
+		};
+
+		clk32k: clock-controller@e001d050 {
+			compatible = "microchip,sama7g5-sckc", "microchip,sam9x60-sckc";
+			reg = <0xe001d050 0x4>;
+			clocks = <&slow_xtal>;
+			#clock-cells = <1>;
+		};
+
+		gpbr: gpbr@e001d060 {
+			compatible = "microchip,sama7g5-gpbr", "syscon";
+			reg = <0xe001d060 0x48>;
+		};
+
+		rtc: rtc@e001d0a8 {
+			compatible = "microchip,sama7g5-rtc", "microchip,sam9x60-rtc";
+			reg = <0xe001d0a8 0x30>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 1>;
+		};
+
+		ps_wdt: watchdog@e001d180 {
+			compatible = "microchip,sama7g5-wdt";
+			reg = <0xe001d180 0x24>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 0>;
+		};
+
+		chipid@e0020000 {
+			compatible = "microchip,sama7g5-chipid";
+			reg = <0xe0020000 0x8>;
+		};
+
+		tcb1: timer@e0800000 {
+			compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe0800000 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 91>, <&pmc PMC_TYPE_PERIPHERAL 92>, <&pmc PMC_TYPE_PERIPHERAL 93>, <&clk32k 1>;
+			clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+		};
+
+		hsmc: hsmc@e0808000 {
+			compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
+			reg = <0xe0808000 0x1000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pmecc: ecc-engine@e0808070 {
+				compatible = "atmel,sama5d2-pmecc";
+				reg = <0xe0808070 0x490>,
+				      <0xe0808500 0x200>;
+			};
+		};
+
+		qspi0: spi@e080c000 {
+			compatible = "microchip,sama7g5-ospi";
+			reg = <0xe080c000 0x400>, <0x20000000 0x10000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(41)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(40)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 78>, <&pmc PMC_TYPE_GCK 78>;
+			clock-names = "pclk", "gclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		qspi1: spi@e0810000 {
+			compatible = "microchip,sama7g5-qspi";
+			reg = <0xe0810000 0x400>, <0x30000000 0x10000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(43)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(42)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 79>, <&pmc PMC_TYPE_GCK 79>;
+			clock-names = "pclk", "gclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e0828000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0828000 0x100>, <0x100000 0x7800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 61>, <&pmc PMC_TYPE_GCK 61>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 61>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can1: can@e082c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe082c000 0x100>, <0x100000 0xbc00>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 62>, <&pmc PMC_TYPE_GCK 62>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 62>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can2: can@e0830000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0830000 0x100>, <0x100000 0x10000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 63>, <&pmc PMC_TYPE_GCK 63>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 63>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0xbc00 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can3: can@e0834000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0834000 0x100>, <0x110000 0x4400>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 64>, <&pmc PMC_TYPE_GCK 64>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 64>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can4: can@e0838000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0838000 0x100>, <0x110000 0x8800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 65>, <&pmc PMC_TYPE_GCK 65>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 65>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x4400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can5: can@e083c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe083c000 0x100>, <0x110000 0xcc00>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 66>, <&pmc PMC_TYPE_GCK 66>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 66>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x8800 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		adc: adc@e1000000 {
+			compatible = "microchip,sama7g5-adc";
+			reg = <0xe1000000 0x200>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_GCK 26>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
+			assigned-clock-rates = <100000000>;
+			clock-names = "adc_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(0)>;
+			dma-names = "rx";
+			atmel,min-sample-rate-hz = <200000>;
+			atmel,max-sample-rate-hz = <20000000>;
+			atmel,startup-time-ms = <4>;
+			#io-channel-cells = <1>;
+			nvmem-cells = <&temperature_calib>;
+			nvmem-cell-names = "temperature_calib";
+			status = "disabled";
+		};
+
+		sdmmc0: mmc@e1204000 {
+			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe1204000 0x4000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 80>, <&pmc PMC_TYPE_GCK 80>;
+			clock-names = "hclock", "multclk";
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 80>;
+			assigned-clock-rates = <200000000>;
+			microchip,sdcal-inverted;
+			status = "disabled";
+		};
+
+		sdmmc1: mmc@e1208000 {
+			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe1208000 0x4000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 81>, <&pmc PMC_TYPE_GCK 81>;
+			clock-names = "hclock", "multclk";
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 81>;
+			assigned-clock-rates = <200000000>;
+			microchip,sdcal-inverted;
+			status = "disabled";
+		};
+
+		sdmmc2: mmc@e120c000 {
+			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe120c000 0x4000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 82>, <&pmc PMC_TYPE_GCK 82>;
+			clock-names = "hclock", "multclk";
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 82>;
+			assigned-clock-rates = <200000000>;
+			microchip,sdcal-inverted;
+			status = "disabled";
+		};
+
+		csi2dc: csi2dc@e1404000 {
+			compatible = "microchip,sama7g5-csi2dc";
+			reg = <0xe1404000 0x500>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&xisc>;
+			clock-names = "pclk", "scck";
+			assigned-clocks = <&xisc>;
+			assigned-clock-rates = <266000000>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					csi2dc_in: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					csi2dc_out: endpoint {
+						bus-width = <14>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+						remote-endpoint = <&xisc_in>;
+					};
+				};
+			};
+		};
+
+		xisc: xisc@e1408000 {
+			compatible = "microchip,sama7g5-isc";
+			reg = <0xe1408000 0x2000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
+			clock-names = "hclock";
+			#clock-cells = <0>;
+			clock-output-names = "isc-mck";
+			status = "disabled";
+
+			port {
+				xisc_in: endpoint {
+					bus-type = <5>; /* Parallel */
+					bus-width = <14>;
+					hsync-active = <1>;
+					vsync-active = <1>;
+					remote-endpoint = <&csi2dc_out>;
+				};
+			};
+		};
+
+		pwm: pwm@e1604000 {
+			compatible = "microchip,sama7g5-pwm", "atmel,sama5d2-pwm";
+			reg = <0xe1604000 0x4000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			#pwm-cells = <3>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 77>;
+			status = "disabled";
+		};
+
+		pdmc0: sound@e1608000 {
+			compatible = "microchip,sama7g5-pdmc";
+			reg = <0xe1608000 0x1000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			#sound-dai-cells = <0>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(37)>;
+			dma-names = "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 68>, <&pmc PMC_TYPE_GCK 68>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		pdmc1: sound@e160c000 {
+			compatible = "microchip,sama7g5-pdmc";
+			reg = <0xe160c000 0x1000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			#sound-dai-cells = <0>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(38)>;
+			dma-names = "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 69>, <&pmc PMC_TYPE_GCK 69>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		spdifrx: spdifrx@e1614000 {
+			#sound-dai-cells = <0>;
+			compatible = "microchip,sama7g5-spdifrx";
+			reg = <0xe1614000 0x4000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(49)>;
+			dma-names = "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 84>, <&pmc PMC_TYPE_GCK 84>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		spdiftx: spdiftx@e1618000 {
+			#sound-dai-cells = <0>;
+			compatible = "microchip,sama7g5-spdiftx";
+			reg = <0xe1618000 0x4000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(50)>;
+			dma-names = "tx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 85>, <&pmc PMC_TYPE_GCK 85>;
+			clock-names = "pclk", "gclk";
+		};
+
+		i2s0: i2s@e161c000 {
+			compatible = "microchip,sama7g5-i2smcc";
+			#sound-dai-cells = <0>;
+			reg = <0xe161c000 0x4000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>, <&dma0 AT91_XDMAC_DT_PERID(33)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		i2s1: i2s@e1620000 {
+			compatible = "microchip,sama7g5-i2smcc";
+			#sound-dai-cells = <0>;
+			reg = <0xe1620000 0x4000>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(36)>, <&dma0 AT91_XDMAC_DT_PERID(35)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		eic: interrupt-controller@e1628000 {
+			compatible = "microchip,sama7g5-eic";
+			reg = <0xe1628000 0xec>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+			clock-names = "pclk";
+			status = "disabled";
+		};
+
+		pit64b0: timer@e1800000 {
+			compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xe1800000 0x4000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 70>, <&pmc PMC_TYPE_GCK 70>;
+			clock-names = "pclk", "gclk";
+		};
+
+		pit64b1: timer@e1804000 {
+			compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xe1804000 0x4000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 71>, <&pmc PMC_TYPE_GCK 71>;
+			clock-names = "pclk", "gclk";
+		};
+
+		aes: crypto@e1810000 {
+			compatible = "atmel,at91sam9g46-aes";
+			reg = <0xe1810000 0x100>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+			clock-names = "aes_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+			dma-names = "tx", "rx";
+		};
+
+		sha: crypto@e1814000 {
+			compatible = "atmel,at91sam9g46-sha";
+			reg = <0xe1814000 0x100>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 83>;
+			clock-names = "sha_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
+			dma-names = "tx";
+		};
+
+		flx0: flexcom@e1818000 {
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe1818000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe1818000 0x800>;
+			status = "disabled";
+
+			uart0: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(5)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+		};
+
+		flx1: flexcom@e181c000 {
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe181c000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe181c000 0x800>;
+			status = "disabled";
+
+			i2c1: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(7)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx3: flexcom@e1824000 {
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe1824000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe1824000 0x800>;
+			status = "disabled";
+
+			uart3: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(12)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(11)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+		};
+
+		trng: rng@e2010000 {
+			compatible = "microchip,sama7g5-trng", "atmel,at91sam9g45-trng";
+			reg = <0xe2010000 0x100>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 97>;
+			status = "disabled";
+		};
+
+		tdes: crypto@e2014000 {
+			compatible = "atmel,at91sam9g46-tdes";
+			reg = <0xe2014000 0x100>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 96>;
+			clock-names = "tdes_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(53)>;
+			dma-names = "tx", "rx";
+		};
+
+		flx4: flexcom@e2018000 {
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2018000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2018000 0x800>;
+			status = "disabled";
+
+			uart4: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(13)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx7: flexcom@e2024000 {
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2024000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2024000 0x800>;
+			status = "disabled";
+
+			uart7: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(19)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		gmac0: ethernet@e2800000 {
+			compatible = "microchip,sama7g5-gem";
+			reg = <0xe2800000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_GCK 51>, <&pmc PMC_TYPE_GCK 53>;
+			clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 51>;
+			assigned-clock-rates = <125000000>;
+			status = "disabled";
+		};
+
+		gmac1: ethernet@e2804000 {
+			compatible = "microchip,sama7g5-emac";
+			reg = <0xe2804000 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 52>, <&pmc PMC_TYPE_PERIPHERAL 52>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		dma0: dma-controller@e2808000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe2808000 0x1000>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		dma1: dma-controller@e280c000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe280c000 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		/* Place dma2 here despite it's address */
+		dma2: dma-controller@e1200000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe1200000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+			clock-names = "dma_clk";
+			dma-requests = <0>;
+			status = "disabled";
+		};
+
+		tcb0: timer@e2814000 {
+			compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe2814000 0x100>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 88>, <&pmc PMC_TYPE_PERIPHERAL 89>, <&pmc PMC_TYPE_PERIPHERAL 90>, <&clk32k 1>;
+			clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+		};
+
+		flx8: flexcom@e2818000 {
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2818000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2818000 0x800>;
+			status = "disabled";
+
+			i2c8: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(21)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx9: flexcom@e281c000 {
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe281c000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe281c000 0x800>;
+			status = "disabled";
+
+			i2c9: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(23)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx10: flexcom@e2820000 {
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2820000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2820000 0x800>;
+			status = "disabled";
+
+			i2c10: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(26)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(25)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx11: flexcom@e2824000 {
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2824000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2824000 0x800>;
+			status = "disabled";
+
+			spi11: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(28)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(27)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		uddrc: uddrc@e3800000 {
+			compatible = "microchip,sama7g5-uddrc";
+			reg = <0xe3800000 0x4000>;
+		};
+
+		ddr3phy: ddr3phy@e3804000 {
+			compatible = "microchip,sama7g5-ddr3phy";
+			reg = <0xe3804000 0x1000>;
+		};
+
+		otpc: efuse@e8c00000 {
+			compatible = "microchip,sama7g5-otpc", "syscon";
+			reg = <0xe8c00000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			temperature_calib: calib@1 {
+				reg = <OTP_PKT(1) 76>;
+			};
+		};
+
+		gic: interrupt-controller@e8c11000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0xe8c11000 0x1000>,
+				<0xe8c12000 0x2000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/tny_a9260.dts b/arch/arm/boot/dts/microchip/tny_a9260.dts
new file mode 100644
index 000000000000..f0f2a787d669
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/tny_a9260.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * tny_a9260.dts - Device Tree file for Calao TNY A9260 board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+#include "tny_a9260_common.dtsi"
+
+/ {
+	model = "Calao TNY A9260";
+	compatible = "calao,tny-a9260", "atmel,at91sam9260", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi
index 5d83df4675a1..4d4377f51bec 100644
--- a/arch/arm/boot/dts/tny_a9260_common.dtsi
+++ b/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * tny_a9260_common.dtsi - Device Tree file for Caloa TNY A926x board
+ * tny_a9260_common.dtsi - Device Tree file for Calao TNY A926x board
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 
 / {
@@ -11,7 +10,7 @@
 		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock6 rw rootfstype=ubifs";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x4000000>;
 	};
 
@@ -27,6 +26,18 @@
 
 	ahb {
 		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			dbgu: serial@fffff200 {
 				status = "okay";
 			};
diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/microchip/tny_a9263.dts
index 8cf0a9e08571..fd8244b56e05 100644
--- a/arch/arm/boot/dts/tny_a9263.dts
+++ b/arch/arm/boot/dts/microchip/tny_a9263.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
+ * usb_a9263.dts - Device Tree file for Calao USB A9293 board
  *
  *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2 only
  */
 /dts-v1/;
 #include "at91sam9263.dtsi"
@@ -16,7 +15,7 @@
 		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x4000000>;
 	};
 
@@ -36,6 +35,18 @@
 				status = "okay";
 			};
 
+			tcb0: timer@fff7c000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			usb1: gadget@fff78000 {
 				atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
 				status = "okay";
@@ -53,7 +64,7 @@
 				nand@3 {
 					reg = <0x3 0x0 0x800000>;
 					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
 					nand-bus-width = <8>;
 					nand-ecc-mode = "soft";
 					nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/microchip/tny_a9g20.dts b/arch/arm/boot/dts/microchip/tny_a9g20.dts
new file mode 100644
index 000000000000..cebd5696a2c1
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/tny_a9g20.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * tny_a9g20.dts - Device Tree file for Calao TNY A9G20 board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+#include "tny_a9260_common.dtsi"
+
+/ {
+	model = "Calao TNY A9G20";
+	compatible = "calao,tny-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/microchip/usb_a9260.dts b/arch/arm/boot/dts/microchip/usb_a9260.dts
new file mode 100644
index 000000000000..3b61e7145060
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/usb_a9260.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * usb_a9260.dts - Device Tree file for Calao USB A9260 board
+ *
+ *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+#include "usb_a9260_common.dtsi"
+
+/ {
+	model = "Calao USB A9260";
+	compatible = "calao,usb-a9260", "atmel,at91sam9260", "atmel,at91sam9";
+
+	ahb {
+		apb {
+			shdwc: poweroff@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi
index 34a49995eda3..da32c5fdcc47 100644
--- a/arch/arm/boot/dts/usb_a9260_common.dtsi
+++ b/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi
@@ -1,12 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * usb_a926x.dts - Device Tree file for Caloa USB A926x board
+ * usb_a926x.dts - Device Tree file for Calao USB A926x board
  *
  *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2 or later.
  */
 
 / {
+	chosen {
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
+	};
+
 	clocks {
 		slow_xtal {
 			clock-frequency = <32768>;
@@ -17,12 +21,28 @@
 		};
 	};
 
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
 	ahb {
 		apb {
 			dbgu: serial@fffff200 {
 				status = "okay";
 			};
 
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			macb0: ethernet@fffc4000 {
 				phy-mode = "rmii";
 				status = "okay";
@@ -100,7 +120,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
@@ -111,17 +131,14 @@
 
 		user_led {
 			label = "user_led";
-			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
+			gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		user_pb {
+		button-user-pb {
 			label = "user_pb";
 			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/microchip/usb_a9263.dts
index 482381c1c962..8e1a3fb61087 100644
--- a/arch/arm/boot/dts/usb_a9263.dts
+++ b/arch/arm/boot/dts/microchip/usb_a9263.dts
@@ -1,22 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
+ * usb_a9263.dts - Device Tree file for Calao USB A9293 board
  *
  *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2 only
  */
 /dts-v1/;
 #include "at91sam9263.dtsi"
 
 / {
 	model = "Calao USB A9263";
-	compatible = "atmel,usb-a9263", "atmel,at91sam9263", "atmel,at91sam9";
+	compatible = "calao,usb-a9263", "atmel,at91sam9263", "atmel,at91sam9";
 
 	chosen {
 		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x4000000>;
 	};
 
@@ -36,6 +35,18 @@
 				status = "okay";
 			};
 
+			tcb0: timer@fff7c000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			macb0: ethernet@fffbc000 {
 				phy-mode = "rmii";
 				status = "okay";
@@ -47,16 +58,16 @@
 			};
 
 			spi0: spi@fffa4000 {
-				cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>;
+				cs-gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
 				status = "okay";
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					reg = <0>;
 					spi-max-frequency = <15000000>;
 				};
 			};
 
-			shdwc@fffffd10 {
+			poweroff@fffffd10 {
 				atmel,wakeup-counter = <10>;
 				atmel,wakeup-rtt-timer;
 			};
@@ -73,7 +84,7 @@
 				nand@3 {
 					reg = <0x3 0x0 0x800000>;
 					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
 					nand-bus-width = <8>;
 					nand-ecc-mode = "soft";
 					nand-on-flash-bbt;
@@ -128,7 +139,7 @@
 			};
 		};
 
-		usb0: ohci@00a00000 {
+		usb0: usb@a00000 {
 			num-ports = <2>;
 			status = "okay";
 		};
@@ -140,16 +151,13 @@
 		user_led {
 			label = "user_led";
 			gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
 		};
 	};
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		user_pb {
+		button-user-pb {
 			label = "user_pb";
 			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
diff --git a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi
index 5b0ffc1a0b24..5b1d80c0ab26 100644
--- a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi
+++ b/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * calao-dab-mmx.dtsi - Device Tree Include file for Calao DAB-MMX Daughter Board
  *
  * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 
 / {
@@ -66,28 +65,26 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		user_pb1 {
+		button-user-pb1 {
 			label = "user_pb1";
 			gpios = <&pioB 25 GPIO_ACTIVE_LOW>;
 			linux,code = <0x100>;
 		};
 
-		user_pb2 {
+		button-user-pb2 {
 			label = "user_pb2";
 			gpios = <&pioB 13 GPIO_ACTIVE_LOW>;
 			linux,code = <0x101>;
 		};
 
-		user_pb3 {
+		button-user-pb3 {
 			label = "user_pb3";
 			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
 			linux,code = <0x102>;
 		};
 
-		user_pb4 {
+		button-user-pb4 {
 			label = "user_pb4";
 			gpios = <&pioC 9 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
diff --git a/arch/arm/boot/dts/microchip/usb_a9g20.dts b/arch/arm/boot/dts/microchip/usb_a9g20.dts
new file mode 100644
index 000000000000..555291cd30b3
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/usb_a9g20.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * usb_a9g20.dts - Device Tree file for Calao USB A9G20 board
+ *
+ *  Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+#include "usb_a9260_common.dtsi"
+
+/ {
+	model = "Calao USB A9G20";
+	compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+};
+
+&spi0 {
+	cs-gpios = <&pioC 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+	/* TODO: Some revisions might have a dataflash here instead of an EEPROM */
+	eeprom@0 {
+		compatible = "st,m95640", "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <2000000>;
+		size = <8192>;
+		pagesize = <32>;
+		address-width = <16>;
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts b/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts
new file mode 100644
index 000000000000..2eda00477bc5
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * usb_a9g20_lpw.dts - Device Tree file for Calao USB A9G20 Low Power board
+ *
+ *  Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+#include "usb_a9260_common.dtsi"
+
+/ {
+	model = "Calao USB A9G20 Low Power";
+	compatible = "calao,usb-a9g20-lpw", "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	ahb {
+		apb {
+			spi1: spi@fffcc000 {
+				cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+				mmc@0 {
+					compatible = "mmc-spi-slot";
+					reg = <0>;
+					voltage-ranges = <3200 3400>;
+					spi-max-frequency = <25000000>;
+					interrupt-parent = <&pioC>;
+					interrupts = <4 IRQ_TYPE_EDGE_BOTH>;
+				};
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		rtc@56 {
+			compatible = "microcrystal,rv3029";
+			reg = <0x56>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts
deleted file mode 100644
index 350208c5e1ed..000000000000
--- a/arch/arm/boot/dts/mmp2-brownstone.dts
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- *  Copyright (C) 2012 Marvell Technology Group Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include "mmp2.dtsi"
-
-/ {
-	model = "Marvell MMP2 Brownstone Development Board";
-	compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2";
-
-	chosen {
-		bootargs = "console=ttyS2,38400 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000>;
-	};
-
-	soc {
-		apb@d4000000 {
-			uart3: uart@d4018000 {
-				status = "okay";
-			};
-			twsi1: i2c@d4011000 {
-				status = "okay";
-				pmic: max8925@3c {
-					compatible = "maxium,max8925";
-					reg = <0x3c>;
-					interrupts = <1>;
-					interrupt-parent = <&intcmux4>;
-					interrupt-controller;
-					#interrupt-cells = <1>;
-					maxim,tsc-irq = <0>;
-
-					regulators {
-						SDV1 {
-							regulator-min-microvolt = <637500>;
-							regulator-max-microvolt = <1425000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						SDV2 {
-							regulator-min-microvolt = <650000>;
-							regulator-max-microvolt = <2225000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						SDV3 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO1 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO2 {
-							regulator-min-microvolt = <650000>;
-							regulator-max-microvolt = <2250000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO3 {
-							regulator-min-microvolt = <650000>;
-							regulator-max-microvolt = <2250000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO4 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO5 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO6 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO7 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO8 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO9 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO10 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-						};
-						LDO11 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO12 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO13 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO14 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO15 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO16 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO17 {
-							regulator-min-microvolt = <650000>;
-							regulator-max-microvolt = <2250000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO18 {
-							regulator-min-microvolt = <650000>;
-							regulator-max-microvolt = <2250000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO19 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO20 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-					};
-					backlight {
-						maxim,max8925-dual-string = <0>;
-					};
-					charger {
-						batt-detect = <0>;
-						topoff-threshold = <1>;
-						fast-charge = <7>;
-						no-temp-support = <0>;
-						no-insert-detect = <0>;
-					};
-				};
-			};
-			rtc: rtc@d4010000 {
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
deleted file mode 100644
index 766bbb8495b6..000000000000
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- *  Copyright (C) 2012 Marvell Technology Group Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/clock/marvell,mmp2.h>
-
-/ {
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		i2c0 = &twsi1;
-		i2c1 = &twsi2;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		L2: l2-cache {
-			compatible = "marvell,tauros2-cache";
-			marvell,tauros2-cache-features = <0x3>;
-		};
-
-		axi@d4200000 {	/* AXI */
-			compatible = "mrvl,axi-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd4200000 0x00200000>;
-			ranges;
-
-			intc: interrupt-controller@d4282000 {
-				compatible = "mrvl,mmp2-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0xd4282000 0x1000>;
-				mrvl,intc-nr-irqs = <64>;
-			};
-
-			intcmux4: interrupt-controller@d4282150 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <4>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x150 0x4>, <0x168 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <2>;
-			};
-
-			intcmux5: interrupt-controller@d4282154 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <5>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x154 0x4>, <0x16c 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <2>;
-				mrvl,clr-mfp-irq = <1>;
-			};
-
-			intcmux9: interrupt-controller@d4282180 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <9>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x180 0x4>, <0x17c 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <3>;
-			};
-
-			intcmux17: interrupt-controller@d4282158 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <17>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x158 0x4>, <0x170 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <5>;
-			};
-
-			intcmux35: interrupt-controller@d428215c {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <35>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x15c 0x4>, <0x174 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <15>;
-			};
-
-			intcmux51: interrupt-controller@d4282160 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <51>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x160 0x4>, <0x178 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <2>;
-			};
-
-			intcmux55: interrupt-controller@d4282188 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <55>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x188 0x4>, <0x184 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <2>;
-			};
-		};
-
-		apb@d4000000 {	/* APB */
-			compatible = "mrvl,apb-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd4000000 0x00200000>;
-			ranges;
-
-			timer0: timer@d4014000 {
-				compatible = "mrvl,mmp-timer";
-				reg = <0xd4014000 0x100>;
-				interrupts = <13>;
-			};
-
-			uart1: uart@d4030000 {
-				compatible = "mrvl,mmp-uart";
-				reg = <0xd4030000 0x1000>;
-				interrupts = <27>;
-				clocks = <&soc_clocks MMP2_CLK_UART0>;
-				resets = <&soc_clocks MMP2_CLK_UART0>;
-				status = "disabled";
-			};
-
-			uart2: uart@d4017000 {
-				compatible = "mrvl,mmp-uart";
-				reg = <0xd4017000 0x1000>;
-				interrupts = <28>;
-				clocks = <&soc_clocks MMP2_CLK_UART1>;
-				resets = <&soc_clocks MMP2_CLK_UART1>;
-				status = "disabled";
-			};
-
-			uart3: uart@d4018000 {
-				compatible = "mrvl,mmp-uart";
-				reg = <0xd4018000 0x1000>;
-				interrupts = <24>;
-				clocks = <&soc_clocks MMP2_CLK_UART2>;
-				resets = <&soc_clocks MMP2_CLK_UART2>;
-				status = "disabled";
-			};
-
-			uart4: uart@d4016000 {
-				compatible = "mrvl,mmp-uart";
-				reg = <0xd4016000 0x1000>;
-				interrupts = <46>;
-				clocks = <&soc_clocks MMP2_CLK_UART3>;
-				resets = <&soc_clocks MMP2_CLK_UART3>;
-				status = "disabled";
-			};
-
-			gpio@d4019000 {
-				compatible = "marvell,mmp2-gpio";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xd4019000 0x1000>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupts = <49>;
-				interrupt-names = "gpio_mux";
-				clocks = <&soc_clocks MMP2_CLK_GPIO>;
-				resets = <&soc_clocks MMP2_CLK_GPIO>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				ranges;
-
-				gcb0: gpio@d4019000 {
-					reg = <0xd4019000 0x4>;
-				};
-
-				gcb1: gpio@d4019004 {
-					reg = <0xd4019004 0x4>;
-				};
-
-				gcb2: gpio@d4019008 {
-					reg = <0xd4019008 0x4>;
-				};
-
-				gcb3: gpio@d4019100 {
-					reg = <0xd4019100 0x4>;
-				};
-
-				gcb4: gpio@d4019104 {
-					reg = <0xd4019104 0x4>;
-				};
-
-				gcb5: gpio@d4019108 {
-					reg = <0xd4019108 0x4>;
-				};
-			};
-
-			twsi1: i2c@d4011000 {
-				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4011000 0x1000>;
-				interrupts = <7>;
-				clocks = <&soc_clocks MMP2_CLK_TWSI0>;
-				resets = <&soc_clocks MMP2_CLK_TWSI0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				mrvl,i2c-fast-mode;
-				status = "disabled";
-			};
-
-			twsi2: i2c@d4025000 {
-				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4025000 0x1000>;
-				interrupts = <58>;
-				clocks = <&soc_clocks MMP2_CLK_TWSI1>;
-				resets = <&soc_clocks MMP2_CLK_TWSI1>;
-				status = "disabled";
-			};
-
-			rtc: rtc@d4010000 {
-				compatible = "mrvl,mmp-rtc";
-				reg = <0xd4010000 0x1000>;
-				interrupts = <1 0>;
-				interrupt-names = "rtc 1Hz", "rtc alarm";
-				interrupt-parent = <&intcmux5>;
-				clocks = <&soc_clocks MMP2_CLK_RTC>;
-				resets = <&soc_clocks MMP2_CLK_RTC>;
-				status = "disabled";
-			};
-		};
-
-		soc_clocks: clocks{
-			compatible = "marvell,mmp2-clock";
-			reg = <0xd4050000 0x1000>,
-			      <0xd4282800 0x400>,
-			      <0xd4015000 0x1000>;
-			reg-names = "mpmu", "apmu", "apbc";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/moxa/Makefile b/arch/arm/boot/dts/moxa/Makefile
new file mode 100644
index 000000000000..d61ce8d4e732
--- /dev/null
+++ b/arch/arm/boot/dts/moxa/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MOXART) += \
+	moxart-uc7112lx.dtb
diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxa/moxart-uc7112lx.dts
index 4a962a26482d..e07b807b4cec 100644
--- a/arch/arm/boot/dts/moxart-uc7112lx.dts
+++ b/arch/arm/boot/dts/moxa/moxart-uc7112lx.dts
@@ -1,8 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /* moxart-uc7112lx.dts - Device Tree file for MOXA UC-7112-LX
  *
  * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
- *
- * Licensed under GPLv2 or later.
  */
 
 /dts-v1/;
@@ -80,7 +79,7 @@
 	clocks = <&ref12>;
 };
 
-&sdhci {
+&mmc {
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxa/moxart.dtsi
index 1f4c795d3f72..11cbea5b94d2 100644
--- a/arch/arm/boot/dts/moxart.dtsi
+++ b/arch/arm/boot/dts/moxa/moxart.dtsi
@@ -1,14 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /* moxart.dtsi - Device Tree Include file for MOXA ART family SoC
  *
  * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
- *
- * Licensed under GPLv2 or later.
  */
 
-/include/ "skeleton.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "moxa,moxart";
 	model = "MOXART";
 	interrupt-parent = <&intc>;
@@ -87,13 +87,14 @@
 		};
 
 		watchdog: watchdog@98500000 {
-			compatible = "moxa,moxart-watchdog";
+			compatible = "moxa,moxart-watchdog", "faraday,ftwdt010";
 			reg = <0x98500000 0x10>;
 			clocks = <&clk_apb>;
+			clock-names = "PCLK";
 		};
 
-		sdhci: sdhci@98e00000 {
-			compatible = "moxa,moxart-sdhci";
+		mmc: mmc@98e00000 {
+			compatible = "moxa,moxart-mmc";
 			reg = <0x98e00000 0x5C>;
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_apb>;
@@ -137,7 +138,7 @@
 			status = "disabled";
 		};
 
-		uart0: uart@98200000 {
+		uart0: serial@98200000 {
 			compatible = "ns16550a";
 			reg = <0x98200000 0x20>;
 			interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
deleted file mode 100644
index f1efdc63656a..000000000000
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ /dev/null
@@ -1,605 +0,0 @@
-/*
- * Copyright (c) 2015 MediaTek Inc.
- * Author: Erin.Lo <erin.lo@mediatek.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/clock/mt2701-clk.h>
-#include <dt-bindings/power/mt2701-power.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/memory/mt2701-larb-port.h>
-#include <dt-bindings/reset/mt2701-resets.h>
-#include "skeleton64.dtsi"
-#include "mt2701-pinfunc.h"
-
-/ {
-	compatible = "mediatek,mt2701";
-	interrupt-parent = <&cirq>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "mediatek,mt81xx-tz-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x1>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x2>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x3>;
-		};
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		trustzone-bootinfo@80002000 {
-			compatible = "mediatek,trustzone-bootinfo";
-			reg = <0 0x80002000 0 0x1000>;
-		};
-	};
-
-	system_clk: dummy13m {
-		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
-		#clock-cells = <0>;
-	};
-
-	rtc_clk: dummy32k {
-		compatible = "fixed-clock";
-		clock-frequency = <32000>;
-		#clock-cells = <0>;
-	};
-
-	clk26m: oscillator@0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-		clock-output-names = "clk26m";
-	};
-
-	rtc32k: oscillator@1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32000>;
-		clock-output-names = "rtc32k";
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu_thermal {
-			polling-delay-passive = <1000>; /* milliseconds */
-			polling-delay = <1000>; /* milliseconds */
-
-			thermal-sensors = <&thermal 0>;
-			sustainable-power = <1000>;
-
-			trips {
-				threshold: trip-point@0 {
-					temperature = <68000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				target: trip-point@1 {
-					temperature = <85000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu_crit: cpu_crit@0 {
-					temperature = <115000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	topckgen: syscon@10000000 {
-		compatible = "mediatek,mt2701-topckgen", "syscon";
-		reg = <0 0x10000000 0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	infracfg: syscon@10001000 {
-		compatible = "mediatek,mt2701-infracfg", "syscon";
-		reg = <0 0x10001000 0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	pericfg: syscon@10003000 {
-		compatible = "mediatek,mt2701-pericfg", "syscon";
-		reg = <0 0x10003000 0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	syscfg_pctl_a: syscfg@10005000 {
-		compatible = "mediatek,mt2701-pctl-a-syscfg", "syscon";
-		reg = <0 0x10005000 0 0x1000>;
-	};
-
-	scpsys: scpsys@10006000 {
-		compatible = "mediatek,mt2701-scpsys", "syscon";
-		#power-domain-cells = <1>;
-		reg = <0 0x10006000 0 0x1000>;
-		infracfg = <&infracfg>;
-		clocks = <&topckgen CLK_TOP_MM_SEL>,
-			 <&topckgen CLK_TOP_MFG_SEL>,
-			 <&topckgen CLK_TOP_ETHIF_SEL>;
-		clock-names = "mm", "mfg", "ethif";
-	};
-
-	watchdog: watchdog@10007000 {
-		compatible = "mediatek,mt2701-wdt",
-			     "mediatek,mt6589-wdt";
-		reg = <0 0x10007000 0 0x100>;
-	};
-
-	timer: timer@10008000 {
-		compatible = "mediatek,mt2701-timer",
-			     "mediatek,mt6577-timer";
-		reg = <0 0x10008000 0 0x80>;
-		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&system_clk>, <&rtc_clk>;
-		clock-names = "system-clk", "rtc-clk";
-	};
-
-	pio: pinctrl@1000b000 {
-		compatible = "mediatek,mt2701-pinctrl";
-		reg = <0 0x1000b000 0 0x1000>;
-		mediatek,pctl-regmap = <&syscfg_pctl_a>;
-		pins-are-numbered;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	smi_common: smi@1000c000 {
-		compatible = "mediatek,mt2701-smi-common";
-		reg = <0 0x1000c000 0 0x1000>;
-		clocks = <&infracfg CLK_INFRA_SMI>,
-			 <&mmsys CLK_MM_SMI_COMMON>,
-			 <&infracfg CLK_INFRA_SMI>;
-		clock-names = "apb", "smi", "async";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
-	};
-
-	sysirq: interrupt-controller@10200100 {
-		compatible = "mediatek,mt2701-sysirq",
-			     "mediatek,mt6577-sysirq";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-		reg = <0 0x10200100 0 0x1c>;
-	};
-
-	cirq: interrupt-controller@10204000 {
-		compatible = "mediatek,mt2701-cirq",
-			     "mediatek,mtk-cirq";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&sysirq>;
-		reg = <0 0x10204000 0 0x400>;
-		mediatek,ext-irq-range = <32 200>;
-	};
-
-	iommu: mmsys_iommu@10205000 {
-		compatible = "mediatek,mt2701-m4u";
-		reg = <0 0x10205000 0 0x1000>;
-		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&infracfg CLK_INFRA_M4U>;
-		clock-names = "bclk";
-		mediatek,larbs = <&larb0 &larb1 &larb2>;
-		#iommu-cells = <1>;
-	};
-
-	apmixedsys: syscon@10209000 {
-		compatible = "mediatek,mt2701-apmixedsys", "syscon";
-		reg = <0 0x10209000 0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	gic: interrupt-controller@10211000 {
-		compatible = "arm,cortex-a7-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-		reg = <0 0x10211000 0 0x1000>,
-		      <0 0x10212000 0 0x2000>,
-		      <0 0x10214000 0 0x2000>,
-		      <0 0x10216000 0 0x2000>;
-	};
-
-	auxadc: adc@11001000 {
-		compatible = "mediatek,mt2701-auxadc";
-		reg = <0 0x11001000 0 0x1000>;
-		clocks = <&pericfg CLK_PERI_AUXADC>;
-		clock-names = "main";
-		#io-channel-cells = <1>;
-		status = "disabled";
-	};
-
-	uart0: serial@11002000 {
-		compatible = "mediatek,mt2701-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0 0x11002000 0 0x400>;
-		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
-		clock-names = "baud", "bus";
-		status = "disabled";
-	};
-
-	uart1: serial@11003000 {
-		compatible = "mediatek,mt2701-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0 0x11003000 0 0x400>;
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
-		clock-names = "baud", "bus";
-		status = "disabled";
-	};
-
-	uart2: serial@11004000 {
-		compatible = "mediatek,mt2701-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0 0x11004000 0 0x400>;
-		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
-		clock-names = "baud", "bus";
-		status = "disabled";
-	};
-
-	uart3: serial@11005000 {
-		compatible = "mediatek,mt2701-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0 0x11005000 0 0x400>;
-		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
-		clock-names = "baud", "bus";
-		status = "disabled";
-	};
-
-	i2c0: i2c@11007000 {
-		compatible = "mediatek,mt2701-i2c",
-			     "mediatek,mt6577-i2c";
-		reg = <0 0x11007000 0 0x70>,
-		      <0 0x11000200 0 0x80>;
-		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
-		clock-div = <16>;
-		clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>;
-		clock-names = "main", "dma";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@11008000 {
-		compatible = "mediatek,mt2701-i2c",
-			     "mediatek,mt6577-i2c";
-		reg = <0 0x11008000 0 0x70>,
-		      <0 0x11000280 0 0x80>;
-		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
-		clock-div = <16>;
-		clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>;
-		clock-names = "main", "dma";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@11009000 {
-		compatible = "mediatek,mt2701-i2c",
-			     "mediatek,mt6577-i2c";
-		reg = <0 0x11009000 0 0x70>,
-		      <0 0x11000300 0 0x80>;
-		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>;
-		clock-div = <16>;
-		clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>;
-		clock-names = "main", "dma";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	spi0: spi@1100a000 {
-		compatible = "mediatek,mt2701-spi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0 0x1100a000 0 0x100>;
-		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
-			 <&topckgen CLK_TOP_SPI0_SEL>,
-			 <&pericfg CLK_PERI_SPI0>;
-		clock-names = "parent-clk", "sel-clk", "spi-clk";
-		status = "disabled";
-	};
-
-	thermal: thermal@1100b000 {
-		#thermal-sensor-cells = <0>;
-		compatible = "mediatek,mt2701-thermal";
-		reg = <0 0x1100b000 0 0x1000>;
-		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
-		clock-names = "therm", "auxadc";
-		resets = <&pericfg MT2701_PERI_THERM_SW_RST>;
-		reset-names = "therm";
-		mediatek,auxadc = <&auxadc>;
-		mediatek,apmixedsys = <&apmixedsys>;
-	};
-
-	nandc: nfi@1100d000 {
-		compatible = "mediatek,mt2701-nfc";
-		reg = <0 0x1100d000 0 0x1000>;
-		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_NFI>,
-			 <&pericfg CLK_PERI_NFI_PAD>;
-		clock-names = "nfi_clk", "pad_clk";
-		status = "disabled";
-		ecc-engine = <&bch>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	bch: ecc@1100e000 {
-		compatible = "mediatek,mt2701-ecc";
-		reg = <0 0x1100e000 0 0x1000>;
-		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_NFI_ECC>;
-		clock-names = "nfiecc_clk";
-		status = "disabled";
-	};
-
-	nor_flash: spi@11014000 {
-		compatible = "mediatek,mt2701-nor",
-			     "mediatek,mt8173-nor";
-		reg = <0 0x11014000 0 0xe0>;
-		clocks = <&pericfg CLK_PERI_FLASH>,
-			 <&topckgen CLK_TOP_FLASH_SEL>;
-		clock-names = "spi", "sf";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	spi1: spi@11016000 {
-		compatible = "mediatek,mt2701-spi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0 0x11016000 0 0x100>;
-		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
-			 <&topckgen CLK_TOP_SPI1_SEL>,
-			 <&pericfg CLK_PERI_SPI1>;
-		clock-names = "parent-clk", "sel-clk", "spi-clk";
-		status = "disabled";
-	};
-
-	spi2: spi@11017000 {
-		compatible = "mediatek,mt2701-spi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0 0x11017000 0 0x1000>;
-		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
-			 <&topckgen CLK_TOP_SPI2_SEL>,
-			 <&pericfg CLK_PERI_SPI2>;
-		clock-names = "parent-clk", "sel-clk", "spi-clk";
-		status = "disabled";
-	};
-
-	afe: audio-controller@11220000 {
-		compatible = "mediatek,mt2701-audio";
-		reg = <0 0x11220000 0 0x2000>,
-		      <0 0x112a0000 0 0x20000>;
-		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
-
-		clocks = <&infracfg CLK_INFRA_AUDIO>,
-			 <&topckgen CLK_TOP_AUD_MUX1_SEL>,
-			 <&topckgen CLK_TOP_AUD_MUX2_SEL>,
-			 <&topckgen CLK_TOP_AUD_MUX1_DIV>,
-			 <&topckgen CLK_TOP_AUD_MUX2_DIV>,
-			 <&topckgen CLK_TOP_AUD_48K_TIMING>,
-			 <&topckgen CLK_TOP_AUD_44K_TIMING>,
-			 <&topckgen CLK_TOP_AUDPLL_MUX_SEL>,
-			 <&topckgen CLK_TOP_APLL_SEL>,
-			 <&topckgen CLK_TOP_AUD1PLL_98M>,
-			 <&topckgen CLK_TOP_AUD2PLL_90M>,
-			 <&topckgen CLK_TOP_HADDS2PLL_98M>,
-			 <&topckgen CLK_TOP_HADDS2PLL_294M>,
-			 <&topckgen CLK_TOP_AUDPLL>,
-			 <&topckgen CLK_TOP_AUDPLL_D4>,
-			 <&topckgen CLK_TOP_AUDPLL_D8>,
-			 <&topckgen CLK_TOP_AUDPLL_D16>,
-			 <&topckgen CLK_TOP_AUDPLL_D24>,
-			 <&topckgen CLK_TOP_AUDINTBUS_SEL>,
-			 <&clk26m>,
-			 <&topckgen CLK_TOP_SYSPLL1_D4>,
-			 <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
-			 <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
-			 <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
-			 <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
-			 <&topckgen CLK_TOP_AUD_K5_SRC_SEL>,
-			 <&topckgen CLK_TOP_AUD_K6_SRC_SEL>,
-			 <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
-			 <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
-			 <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
-			 <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
-			 <&topckgen CLK_TOP_AUD_K5_SRC_DIV>,
-			 <&topckgen CLK_TOP_AUD_K6_SRC_DIV>,
-			 <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
-			 <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
-			 <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
-			 <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
-			 <&topckgen CLK_TOP_AUD_I2S5_MCLK>,
-			 <&topckgen CLK_TOP_AUD_I2S6_MCLK>,
-			 <&topckgen CLK_TOP_ASM_M_SEL>,
-			 <&topckgen CLK_TOP_ASM_H_SEL>,
-			 <&topckgen CLK_TOP_UNIVPLL2_D4>,
-			 <&topckgen CLK_TOP_UNIVPLL2_D2>,
-			 <&topckgen CLK_TOP_SYSPLL_D5>;
-
-		clock-names = "infra_sys_audio_clk",
-			 "top_audio_mux1_sel",
-			 "top_audio_mux2_sel",
-			 "top_audio_mux1_div",
-			 "top_audio_mux2_div",
-			 "top_audio_48k_timing",
-			 "top_audio_44k_timing",
-			 "top_audpll_mux_sel",
-			 "top_apll_sel",
-			 "top_aud1_pll_98M",
-			 "top_aud2_pll_90M",
-			 "top_hadds2_pll_98M",
-			 "top_hadds2_pll_294M",
-			 "top_audpll",
-			 "top_audpll_d4",
-			 "top_audpll_d8",
-			 "top_audpll_d16",
-			 "top_audpll_d24",
-			 "top_audintbus_sel",
-			 "clk_26m",
-			 "top_syspll1_d4",
-			 "top_aud_k1_src_sel",
-			 "top_aud_k2_src_sel",
-			 "top_aud_k3_src_sel",
-			 "top_aud_k4_src_sel",
-			 "top_aud_k5_src_sel",
-			 "top_aud_k6_src_sel",
-			 "top_aud_k1_src_div",
-			 "top_aud_k2_src_div",
-			 "top_aud_k3_src_div",
-			 "top_aud_k4_src_div",
-			 "top_aud_k5_src_div",
-			 "top_aud_k6_src_div",
-			 "top_aud_i2s1_mclk",
-			 "top_aud_i2s2_mclk",
-			 "top_aud_i2s3_mclk",
-			 "top_aud_i2s4_mclk",
-			 "top_aud_i2s5_mclk",
-			 "top_aud_i2s6_mclk",
-			 "top_asm_m_sel",
-			 "top_asm_h_sel",
-			 "top_univpll2_d4",
-			 "top_univpll2_d2",
-			 "top_syspll_d5";
-	};
-
-	mmsys: syscon@14000000 {
-		compatible = "mediatek,mt2701-mmsys", "syscon";
-		reg = <0 0x14000000 0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	larb0: larb@14010000 {
-		compatible = "mediatek,mt2701-smi-larb";
-		reg = <0 0x14010000 0 0x1000>;
-		mediatek,smi = <&smi_common>;
-		clocks = <&mmsys CLK_MM_SMI_LARB0>,
-			 <&mmsys CLK_MM_SMI_LARB0>;
-		clock-names = "apb", "smi";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
-	};
-
-	imgsys: syscon@15000000 {
-		compatible = "mediatek,mt2701-imgsys", "syscon";
-		reg = <0 0x15000000 0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	larb2: larb@15001000 {
-		compatible = "mediatek,mt2701-smi-larb";
-		reg = <0 0x15001000 0 0x1000>;
-		mediatek,smi = <&smi_common>;
-		clocks = <&imgsys CLK_IMG_SMI_COMM>,
-			 <&imgsys CLK_IMG_SMI_COMM>;
-		clock-names = "apb", "smi";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-	};
-
-	jpegdec: jpegdec@15004000 {
-		compatible = "mediatek,mt2701-jpgdec";
-		reg = <0 0x15004000 0 0x1000>;
-		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
-		clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
-			  <&imgsys CLK_IMG_JPGDEC>;
-		clock-names = "jpgdec-smi",
-			      "jpgdec";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
-		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
-			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
-	};
-
-	vdecsys: syscon@16000000 {
-		compatible = "mediatek,mt2701-vdecsys", "syscon";
-		reg = <0 0x16000000 0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	larb1: larb@16010000 {
-		compatible = "mediatek,mt2701-smi-larb";
-		reg = <0 0x16010000 0 0x1000>;
-		mediatek,smi = <&smi_common>;
-		clocks = <&vdecsys CLK_VDEC_CKGEN>,
-			 <&vdecsys CLK_VDEC_LARB>;
-		clock-names = "apb", "smi";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
-	};
-
-	hifsys: syscon@1a000000 {
-		compatible = "mediatek,mt2701-hifsys", "syscon";
-		reg = <0 0x1a000000 0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	ethsys: syscon@1b000000 {
-		compatible = "mediatek,mt2701-ethsys", "syscon";
-		reg = <0 0x1b000000 0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	bdpsys: syscon@1c000000 {
-		compatible = "mediatek,mt2701-bdpsys", "syscon";
-		reg = <0 0x1c000000 0 0x1000>;
-		#clock-cells = <1>;
-	};
-};
diff --git a/arch/arm/boot/dts/mt6580-evbp1.dts b/arch/arm/boot/dts/mt6580-evbp1.dts
deleted file mode 100644
index 17daeae6bbe8..000000000000
--- a/arch/arm/boot/dts/mt6580-evbp1.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (c) 2015 MediaTek Inc.
- * Author: Mars.C <mars.cheng@mediatek.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-#include "mt6580.dtsi"
-
-/ {
-	model = "MediaTek MT6580 evaluation board";
-	compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-	};
-
-	chosen {
-		stdout-path = "serial0:921600n8";
-	};
-
-	memory {
-		reg = <0x80000000 0x20000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mt6589-aquaris5.dts b/arch/arm/boot/dts/mt6589-aquaris5.dts
deleted file mode 100644
index 594a6f3bebda..000000000000
--- a/arch/arm/boot/dts/mt6589-aquaris5.dts
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Copyright (c) 2014 MundoReader S.L.
- * Author: Matthias Brugger <matthias.bgg@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-#include "mt6589.dtsi"
-
-/ {
-	model = "bq Aquaris5";
-	compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589";
-
-	chosen {
-		bootargs = "console=ttyS0,921600n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	memory {
-		reg = <0x80000000 0x40000000>;
-	};
-
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mt6592-evb.dts b/arch/arm/boot/dts/mt6592-evb.dts
deleted file mode 100644
index b57237e6394a..000000000000
--- a/arch/arm/boot/dts/mt6592-evb.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (c) 2014 MediaTek Inc.
- * Author: Howard Chen <ibanezchen@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-#include "mt6592.dtsi"
-
-/ {
-	model = "mt6592 evb";
-	compatible = "mediatek,mt6592-evb", "mediatek,mt6592";
-
-	memory {
-		reg = <0x80000000 0x40000000>;
-	};
-};
-
diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts
deleted file mode 100644
index b60b41cad592..000000000000
--- a/arch/arm/boot/dts/mt7623-evb.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright (c) 2016 MediaTek Inc.
- * Author: John Crispin <john@phrozen.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-#include "mt7623.dtsi"
-
-/ {
-	model = "MediaTek MT7623 evaluation board";
-	compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	memory {
-		reg = <0 0x80000000 0 0x40000000>;
-	};
-};
-
-&uart2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
deleted file mode 100644
index d81158b2b02f..000000000000
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ /dev/null
@@ -1,675 +0,0 @@
-/*
- * Copyright (c) 2017 MediaTek Inc.
- * Author: John Crispin <john@phrozen.org>
- *	   Sean Wang <sean.wang@mediatek.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/mt2701-clk.h>
-#include <dt-bindings/pinctrl/mt7623-pinfunc.h>
-#include <dt-bindings/power/mt2701-power.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/phy/phy.h>
-#include <dt-bindings/reset/mt2701-resets.h>
-#include "skeleton64.dtsi"
-
-/ {
-	compatible = "mediatek,mt7623";
-	interrupt-parent = <&sysirq>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "mediatek,mt6589-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x1>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x2>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x3>;
-		};
-	};
-
-	system_clk: dummy13m {
-		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
-		#clock-cells = <0>;
-	};
-
-	rtc32k: oscillator@1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32000>;
-		clock-output-names = "rtc32k";
-	};
-
-	clk26m: oscillator@0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-		clock-output-names = "clk26m";
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		clock-frequency = <13000000>;
-		arm,cpu-registers-not-fw-configured;
-	};
-
-	topckgen: syscon@10000000 {
-		compatible = "mediatek,mt7623-topckgen",
-			     "mediatek,mt2701-topckgen",
-			     "syscon";
-		reg = <0 0x10000000 0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	infracfg: syscon@10001000 {
-		compatible = "mediatek,mt7623-infracfg",
-			     "mediatek,mt2701-infracfg",
-			     "syscon";
-		reg = <0 0x10001000 0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	pericfg: syscon@10003000 {
-		compatible =  "mediatek,mt7623-pericfg",
-			      "mediatek,mt2701-pericfg",
-			      "syscon";
-		reg = <0 0x10003000 0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	pio: pinctrl@10005000 {
-		compatible = "mediatek,mt7623-pinctrl",
-			     "mediatek,mt2701-pinctrl";
-		reg = <0 0x1000b000 0 0x1000>;
-		mediatek,pctl-regmap = <&syscfg_pctl_a>;
-		pins-are-numbered;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	syscfg_pctl_a: syscfg@10005000 {
-		compatible = "mediatek,mt7623-pctl-a-syscfg", "syscon";
-		reg = <0 0x10005000 0 0x1000>;
-	};
-
-	scpsys: scpsys@10006000 {
-		compatible = "mediatek,mt7623-scpsys",
-			     "mediatek,mt2701-scpsys",
-			     "syscon";
-		#power-domain-cells = <1>;
-		reg = <0 0x10006000 0 0x1000>;
-		infracfg = <&infracfg>;
-		clocks = <&topckgen CLK_TOP_MM_SEL>,
-			 <&topckgen CLK_TOP_MFG_SEL>,
-			 <&topckgen CLK_TOP_ETHIF_SEL>;
-		clock-names = "mm", "mfg", "ethif";
-	};
-
-	watchdog: watchdog@10007000 {
-		compatible = "mediatek,mt7623-wdt",
-			     "mediatek,mt6589-wdt";
-		reg = <0 0x10007000 0 0x100>;
-	};
-
-	timer: timer@10008000 {
-		compatible = "mediatek,mt7623-timer",
-			     "mediatek,mt6577-timer";
-		reg = <0 0x10008000 0 0x80>;
-		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&system_clk>, <&rtc32k>;
-		clock-names = "system-clk", "rtc-clk";
-	};
-
-	pwrap: pwrap@1000d000 {
-		compatible = "mediatek,mt7623-pwrap",
-			     "mediatek,mt2701-pwrap";
-		reg = <0 0x1000d000 0 0x1000>;
-		reg-names = "pwrap";
-		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
-		resets = <&infracfg MT2701_INFRA_PMIC_WRAP_RST>;
-		reset-names = "pwrap";
-		clocks = <&infracfg CLK_INFRA_PMICSPI>,
-			 <&infracfg CLK_INFRA_PMICWRAP>;
-		clock-names = "spi", "wrap";
-	};
-
-	cir: cir@0x10013000 {
-		compatible = "mediatek,mt7623-cir";
-		reg = <0 0x10013000 0 0x1000>;
-		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&infracfg CLK_INFRA_IRRX>;
-		clock-names = "clk";
-		status = "disabled";
-	};
-
-	sysirq: interrupt-controller@10200100 {
-		compatible = "mediatek,mt7623-sysirq",
-			     "mediatek,mt6577-sysirq";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-		reg = <0 0x10200100 0 0x1c>;
-	};
-
-	efuse: efuse@10206000 {
-		compatible = "mediatek,mt7623-efuse",
-			     "mediatek,mt8173-efuse";
-		reg	   = <0 0x10206000 0 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		thermal_calibration_data: calib@424 {
-			reg = <0x424 0xc>;
-		};
-	};
-
-	apmixedsys: syscon@10209000 {
-		compatible = "mediatek,mt7623-apmixedsys",
-			     "mediatek,mt2701-apmixedsys",
-			     "syscon";
-		reg = <0 0x10209000 0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	rng: rng@1020f000 {
-		compatible = "mediatek,mt7623-rng";
-		reg = <0 0x1020f000 0 0x1000>;
-		clocks = <&infracfg CLK_INFRA_TRNG>;
-		clock-names = "rng";
-	};
-
-	gic: interrupt-controller@10211000 {
-		compatible = "arm,cortex-a7-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-		reg = <0 0x10211000 0 0x1000>,
-		      <0 0x10212000 0 0x2000>,
-		      <0 0x10214000 0 0x2000>,
-		      <0 0x10216000 0 0x2000>;
-	};
-
-	auxadc: adc@11001000 {
-		compatible = "mediatek,mt7623-auxadc",
-			     "mediatek,mt2701-auxadc";
-		reg = <0 0x11001000 0 0x1000>;
-		clocks = <&pericfg CLK_PERI_AUXADC>;
-		clock-names = "main";
-		#io-channel-cells = <1>;
-	};
-
-	uart0: serial@11002000 {
-		compatible = "mediatek,mt7623-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0 0x11002000 0 0x400>;
-		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_UART0_SEL>,
-			 <&pericfg CLK_PERI_UART0>;
-		clock-names = "baud", "bus";
-		status = "disabled";
-	};
-
-	uart1: serial@11003000 {
-		compatible = "mediatek,mt7623-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0 0x11003000 0 0x400>;
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_UART1_SEL>,
-			 <&pericfg CLK_PERI_UART1>;
-		clock-names = "baud", "bus";
-		status = "disabled";
-	};
-
-	uart2: serial@11004000 {
-		compatible = "mediatek,mt7623-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0 0x11004000 0 0x400>;
-		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_UART2_SEL>,
-			 <&pericfg CLK_PERI_UART2>;
-		clock-names = "baud", "bus";
-		status = "disabled";
-	};
-
-	uart3: serial@11005000 {
-		compatible = "mediatek,mt7623-uart",
-			     "mediatek,mt6577-uart";
-		reg = <0 0x11005000 0 0x400>;
-		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_UART3_SEL>,
-			 <&pericfg CLK_PERI_UART3>;
-		clock-names = "baud", "bus";
-		status = "disabled";
-	};
-
-	pwm: pwm@11006000 {
-		compatible = "mediatek,mt7623-pwm";
-		reg = <0 0x11006000 0 0x1000>;
-		#pwm-cells = <2>;
-		clocks = <&topckgen CLK_TOP_PWM_SEL>,
-			 <&pericfg CLK_PERI_PWM>,
-			 <&pericfg CLK_PERI_PWM1>,
-			 <&pericfg CLK_PERI_PWM2>,
-			 <&pericfg CLK_PERI_PWM3>,
-			 <&pericfg CLK_PERI_PWM4>,
-			 <&pericfg CLK_PERI_PWM5>;
-		clock-names = "top", "main", "pwm1", "pwm2",
-			      "pwm3", "pwm4", "pwm5";
-		status = "disabled";
-	};
-
-	i2c0: i2c@11007000 {
-		compatible = "mediatek,mt7623-i2c",
-			     "mediatek,mt6577-i2c";
-		reg = <0 0x11007000 0 0x70>,
-		      <0 0x11000200 0 0x80>;
-		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
-		clock-div = <16>;
-		clocks = <&pericfg CLK_PERI_I2C0>,
-			 <&pericfg CLK_PERI_AP_DMA>;
-		clock-names = "main", "dma";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@11008000 {
-		compatible = "mediatek,mt7623-i2c",
-			     "mediatek,mt6577-i2c";
-		reg = <0 0x11008000 0 0x70>,
-		      <0 0x11000280 0 0x80>;
-		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
-		clock-div = <16>;
-		clocks = <&pericfg CLK_PERI_I2C1>,
-			 <&pericfg CLK_PERI_AP_DMA>;
-		clock-names = "main", "dma";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@11009000 {
-		compatible = "mediatek,mt7623-i2c",
-			     "mediatek,mt6577-i2c";
-		reg = <0 0x11009000 0 0x70>,
-		      <0 0x11000300 0 0x80>;
-		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>;
-		clock-div = <16>;
-		clocks = <&pericfg CLK_PERI_I2C2>,
-			 <&pericfg CLK_PERI_AP_DMA>;
-		clock-names = "main", "dma";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	spi0: spi@1100a000 {
-		compatible = "mediatek,mt7623-spi",
-			     "mediatek,mt2701-spi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0 0x1100a000 0 0x100>;
-		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
-			 <&topckgen CLK_TOP_SPI0_SEL>,
-			 <&pericfg CLK_PERI_SPI0>;
-		clock-names = "parent-clk", "sel-clk", "spi-clk";
-		status = "disabled";
-	};
-
-	thermal: thermal@1100b000 {
-		#thermal-sensor-cells = <1>;
-		compatible = "mediatek,mt7623-thermal",
-			     "mediatek,mt2701-thermal";
-		reg = <0 0x1100b000 0 0x1000>;
-		interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
-		clock-names = "therm", "auxadc";
-		resets = <&pericfg MT2701_PERI_THERM_SW_RST>;
-		reset-names = "therm";
-		mediatek,auxadc = <&auxadc>;
-		mediatek,apmixedsys = <&apmixedsys>;
-		nvmem-cells = <&thermal_calibration_data>;
-		nvmem-cell-names = "calibration-data";
-	};
-
-	spi1: spi@11016000 {
-		compatible = "mediatek,mt7623-spi",
-			     "mediatek,mt2701-spi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0 0x11016000 0 0x100>;
-		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
-			 <&topckgen CLK_TOP_SPI1_SEL>,
-			 <&pericfg CLK_PERI_SPI1>;
-		clock-names = "parent-clk", "sel-clk", "spi-clk";
-		status = "disabled";
-	};
-
-	spi2: spi@11017000 {
-		compatible = "mediatek,mt7623-spi",
-			     "mediatek,mt2701-spi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0 0x11017000 0 0x1000>;
-		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
-			 <&topckgen CLK_TOP_SPI2_SEL>,
-			 <&pericfg CLK_PERI_SPI2>;
-		clock-names = "parent-clk", "sel-clk", "spi-clk";
-		status = "disabled";
-	};
-
-	nandc: nfi@1100d000 {
-		compatible = "mediatek,mt7623-nfc",
-			     "mediatek,mt2701-nfc";
-		reg = <0 0x1100d000 0 0x1000>;
-		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
-		clocks = <&pericfg CLK_PERI_NFI>,
-			 <&pericfg CLK_PERI_NFI_PAD>;
-		clock-names = "nfi_clk", "pad_clk";
-		status = "disabled";
-		ecc-engine = <&bch>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	bch: ecc@1100e000 {
-		compatible = "mediatek,mt7623-ecc",
-			     "mediatek,mt2701-ecc";
-		reg = <0 0x1100e000 0 0x1000>;
-		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_NFI_ECC>;
-		clock-names = "nfiecc_clk";
-		status = "disabled";
-	};
-
-	afe: audio-controller@11220000 {
-		compatible = "mediatek,mt7623-audio",
-			     "mediatek,mt2701-audio";
-		reg = <0 0x11220000 0 0x2000>,
-		      <0 0x112a0000 0 0x20000>;
-		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
-
-		clocks = <&infracfg CLK_INFRA_AUDIO>,
-			 <&topckgen CLK_TOP_AUD_MUX1_SEL>,
-			 <&topckgen CLK_TOP_AUD_MUX2_SEL>,
-			 <&topckgen CLK_TOP_AUD_MUX1_DIV>,
-			 <&topckgen CLK_TOP_AUD_MUX2_DIV>,
-			 <&topckgen CLK_TOP_AUD_48K_TIMING>,
-			 <&topckgen CLK_TOP_AUD_44K_TIMING>,
-			 <&topckgen CLK_TOP_AUDPLL_MUX_SEL>,
-			 <&topckgen CLK_TOP_APLL_SEL>,
-			 <&topckgen CLK_TOP_AUD1PLL_98M>,
-			 <&topckgen CLK_TOP_AUD2PLL_90M>,
-			 <&topckgen CLK_TOP_HADDS2PLL_98M>,
-			 <&topckgen CLK_TOP_HADDS2PLL_294M>,
-			 <&topckgen CLK_TOP_AUDPLL>,
-			 <&topckgen CLK_TOP_AUDPLL_D4>,
-			 <&topckgen CLK_TOP_AUDPLL_D8>,
-			 <&topckgen CLK_TOP_AUDPLL_D16>,
-			 <&topckgen CLK_TOP_AUDPLL_D24>,
-			 <&topckgen CLK_TOP_AUDINTBUS_SEL>,
-			 <&clk26m>,
-			 <&topckgen CLK_TOP_SYSPLL1_D4>,
-			 <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
-			 <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
-			 <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
-			 <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
-			 <&topckgen CLK_TOP_AUD_K5_SRC_SEL>,
-			 <&topckgen CLK_TOP_AUD_K6_SRC_SEL>,
-			 <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
-			 <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
-			 <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
-			 <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
-			 <&topckgen CLK_TOP_AUD_K5_SRC_DIV>,
-			 <&topckgen CLK_TOP_AUD_K6_SRC_DIV>,
-			 <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
-			 <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
-			 <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
-			 <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
-			 <&topckgen CLK_TOP_AUD_I2S5_MCLK>,
-			 <&topckgen CLK_TOP_AUD_I2S6_MCLK>,
-			 <&topckgen CLK_TOP_ASM_M_SEL>,
-			 <&topckgen CLK_TOP_ASM_H_SEL>,
-			 <&topckgen CLK_TOP_UNIVPLL2_D4>,
-			 <&topckgen CLK_TOP_UNIVPLL2_D2>,
-			 <&topckgen CLK_TOP_SYSPLL_D5>;
-
-		clock-names = "infra_sys_audio_clk",
-			 "top_audio_mux1_sel",
-			 "top_audio_mux2_sel",
-			 "top_audio_mux1_div",
-			 "top_audio_mux2_div",
-			 "top_audio_48k_timing",
-			 "top_audio_44k_timing",
-			 "top_audpll_mux_sel",
-			 "top_apll_sel",
-			 "top_aud1_pll_98M",
-			 "top_aud2_pll_90M",
-			 "top_hadds2_pll_98M",
-			 "top_hadds2_pll_294M",
-			 "top_audpll",
-			 "top_audpll_d4",
-			 "top_audpll_d8",
-			 "top_audpll_d16",
-			 "top_audpll_d24",
-			 "top_audintbus_sel",
-			 "clk_26m",
-			 "top_syspll1_d4",
-			 "top_aud_k1_src_sel",
-			 "top_aud_k2_src_sel",
-			 "top_aud_k3_src_sel",
-			 "top_aud_k4_src_sel",
-			 "top_aud_k5_src_sel",
-			 "top_aud_k6_src_sel",
-			 "top_aud_k1_src_div",
-			 "top_aud_k2_src_div",
-			 "top_aud_k3_src_div",
-			 "top_aud_k4_src_div",
-			 "top_aud_k5_src_div",
-			 "top_aud_k6_src_div",
-			 "top_aud_i2s1_mclk",
-			 "top_aud_i2s2_mclk",
-			 "top_aud_i2s3_mclk",
-			 "top_aud_i2s4_mclk",
-			 "top_aud_i2s5_mclk",
-			 "top_aud_i2s6_mclk",
-			 "top_asm_m_sel",
-			 "top_asm_h_sel",
-			 "top_univpll2_d4",
-			 "top_univpll2_d2",
-			 "top_syspll_d5";
-	};
-
-	mmc0: mmc@11230000 {
-		compatible = "mediatek,mt7623-mmc",
-			     "mediatek,mt8135-mmc";
-		reg = <0 0x11230000 0 0x1000>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_MSDC30_0>,
-			 <&topckgen CLK_TOP_MSDC30_0_SEL>;
-		clock-names = "source", "hclk";
-		status = "disabled";
-	};
-
-	mmc1: mmc@11240000 {
-		compatible = "mediatek,mt7623-mmc",
-			     "mediatek,mt8135-mmc";
-		reg = <0 0x11240000 0 0x1000>;
-		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_MSDC30_1>,
-			 <&topckgen CLK_TOP_MSDC30_1_SEL>;
-		clock-names = "source", "hclk";
-		status = "disabled";
-	};
-
-	usb1: usb@1a1c0000 {
-		compatible = "mediatek,mt7623-xhci",
-			     "mediatek,mt8173-xhci";
-		reg = <0 0x1a1c0000 0 0x1000>,
-		      <0 0x1a1c4700 0 0x0100>;
-		reg-names = "mac", "ippc";
-		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
-			 <&topckgen CLK_TOP_ETHIF_SEL>;
-		clock-names = "sys_ck", "free_ck";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
-		phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
-		status = "disabled";
-	};
-
-	u3phy1: usb-phy@1a1c4000 {
-		compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy";
-		reg = <0 0x1a1c4000 0 0x0700>;
-		clocks = <&clk26m>;
-		clock-names = "u3phya_ref";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		status = "disabled";
-
-		u2port0: usb-phy@1a1c4800 {
-			reg = <0 0x1a1c4800 0 0x0100>;
-			#phy-cells = <1>;
-			status = "okay";
-		};
-
-		u3port0: usb-phy@1a1c4900 {
-			reg = <0 0x1a1c4900 0 0x0700>;
-			#phy-cells = <1>;
-			status = "okay";
-		};
-	};
-
-	usb2: usb@1a240000 {
-		compatible = "mediatek,mt7623-xhci",
-			     "mediatek,mt8173-xhci";
-		reg = <0 0x1a240000 0 0x1000>,
-		      <0 0x1a244700 0 0x0100>;
-		reg-names = "mac", "ippc";
-		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
-			 <&topckgen CLK_TOP_ETHIF_SEL>;
-		clock-names = "sys_ck", "free_ck";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
-		phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
-		status = "disabled";
-	};
-
-	u3phy2: usb-phy@1a244000 {
-		compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy";
-		reg = <0 0x1a244000 0 0x0700>;
-		clocks = <&clk26m>;
-		clock-names = "u3phya_ref";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		status = "disabled";
-
-		u2port1: usb-phy@1a244800 {
-			reg = <0 0x1a244800 0 0x0100>;
-			#phy-cells = <1>;
-			status = "okay";
-		};
-
-		u3port1: usb-phy@1a244900 {
-			reg = <0 0x1a244900 0 0x0700>;
-			#phy-cells = <1>;
-			status = "okay";
-		};
-	};
-
-	hifsys: syscon@1a000000 {
-		compatible = "mediatek,mt7623-hifsys",
-			     "mediatek,mt2701-hifsys",
-			     "syscon";
-		reg = <0 0x1a000000 0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	ethsys: syscon@1b000000 {
-		compatible = "mediatek,mt7623-ethsys",
-			     "mediatek,mt2701-ethsys",
-			     "syscon";
-		reg = <0 0x1b000000 0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	eth: ethernet@1b100000 {
-		compatible = "mediatek,mt2701-eth", "syscon";
-		reg = <0 0x1b100000 0 0x20000>;
-		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
-			 <&ethsys CLK_ETHSYS_ESW>,
-			 <&ethsys CLK_ETHSYS_GP1>,
-			 <&ethsys CLK_ETHSYS_GP2>,
-			 <&apmixedsys CLK_APMIXED_TRGPLL>;
-		clock-names = "ethif", "esw", "gp1", "gp2", "trgpll";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
-		mediatek,ethsys = <&ethsys>;
-		mediatek,pctl = <&syscfg_pctl_a>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	crypto: crypto@1b240000 {
-		compatible = "mediatek,mt7623-crypto";
-		reg = <0 0x1b240000 0 0x20000>;
-		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
-			 <&ethsys CLK_ETHSYS_CRYPTO>;
-		clock-names = "ethif","cryp";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/mt8127-moose.dts b/arch/arm/boot/dts/mt8127-moose.dts
deleted file mode 100644
index 073e295a1cb4..000000000000
--- a/arch/arm/boot/dts/mt8127-moose.dts
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (c) 2014 MediaTek Inc.
- * Author: Joe.C <yingjoe.chen@mediatek.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-#include "mt8127.dtsi"
-
-/ {
-	model = "MediaTek MT8127 Moose Board";
-	compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
-
-	memory {
-		reg = <0 0x80000000 0 0x40000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mt8135-pinfunc.h b/arch/arm/boot/dts/mt8135-pinfunc.h
deleted file mode 100644
index 5a609875cb18..000000000000
--- a/arch/arm/boot/dts/mt8135-pinfunc.h
+++ /dev/null
@@ -1,1302 +0,0 @@
-/*
- * Copyright (c) 2014 MediaTek Inc.
- * Author: Hongzhou.Yang <hongzhou.yang@mediatek.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __DTS_MT8135_PINFUNC_H
-#define __DTS_MT8135_PINFUNC_H
-
-#include <dt-bindings/pinctrl/mt65xx.h>
-
-#define MT8135_PIN_0_MSDC0_DAT7__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
-#define MT8135_PIN_0_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(0) | 1)
-#define MT8135_PIN_0_MSDC0_DAT7__FUNC_EINT49 (MTK_PIN_NO(0) | 2)
-#define MT8135_PIN_0_MSDC0_DAT7__FUNC_I2SOUT_DAT (MTK_PIN_NO(0) | 3)
-#define MT8135_PIN_0_MSDC0_DAT7__FUNC_DAC_DAT_OUT (MTK_PIN_NO(0) | 4)
-#define MT8135_PIN_0_MSDC0_DAT7__FUNC_PCM1_DO (MTK_PIN_NO(0) | 5)
-#define MT8135_PIN_0_MSDC0_DAT7__FUNC_SPI1_MO (MTK_PIN_NO(0) | 6)
-#define MT8135_PIN_0_MSDC0_DAT7__FUNC_NALE (MTK_PIN_NO(0) | 7)
-
-#define MT8135_PIN_1_MSDC0_DAT6__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
-#define MT8135_PIN_1_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(1) | 1)
-#define MT8135_PIN_1_MSDC0_DAT6__FUNC_EINT48 (MTK_PIN_NO(1) | 2)
-#define MT8135_PIN_1_MSDC0_DAT6__FUNC_I2SIN_WS (MTK_PIN_NO(1) | 3)
-#define MT8135_PIN_1_MSDC0_DAT6__FUNC_DAC_WS (MTK_PIN_NO(1) | 4)
-#define MT8135_PIN_1_MSDC0_DAT6__FUNC_PCM1_WS (MTK_PIN_NO(1) | 5)
-#define MT8135_PIN_1_MSDC0_DAT6__FUNC_SPI1_CSN (MTK_PIN_NO(1) | 6)
-#define MT8135_PIN_1_MSDC0_DAT6__FUNC_NCLE (MTK_PIN_NO(1) | 7)
-
-#define MT8135_PIN_2_MSDC0_DAT5__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
-#define MT8135_PIN_2_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(2) | 1)
-#define MT8135_PIN_2_MSDC0_DAT5__FUNC_EINT47 (MTK_PIN_NO(2) | 2)
-#define MT8135_PIN_2_MSDC0_DAT5__FUNC_I2SIN_CK (MTK_PIN_NO(2) | 3)
-#define MT8135_PIN_2_MSDC0_DAT5__FUNC_DAC_CK (MTK_PIN_NO(2) | 4)
-#define MT8135_PIN_2_MSDC0_DAT5__FUNC_PCM1_CK (MTK_PIN_NO(2) | 5)
-#define MT8135_PIN_2_MSDC0_DAT5__FUNC_SPI1_CLK (MTK_PIN_NO(2) | 6)
-#define MT8135_PIN_2_MSDC0_DAT5__FUNC_NLD4 (MTK_PIN_NO(2) | 7)
-
-#define MT8135_PIN_3_MSDC0_DAT4__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
-#define MT8135_PIN_3_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(3) | 1)
-#define MT8135_PIN_3_MSDC0_DAT4__FUNC_EINT46 (MTK_PIN_NO(3) | 2)
-#define MT8135_PIN_3_MSDC0_DAT4__FUNC_A_FUNC_CK (MTK_PIN_NO(3) | 3)
-#define MT8135_PIN_3_MSDC0_DAT4__FUNC_LSCE1B_2X (MTK_PIN_NO(3) | 6)
-#define MT8135_PIN_3_MSDC0_DAT4__FUNC_NLD5 (MTK_PIN_NO(3) | 7)
-
-#define MT8135_PIN_4_MSDC0_CMD__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
-#define MT8135_PIN_4_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(4) | 1)
-#define MT8135_PIN_4_MSDC0_CMD__FUNC_EINT41 (MTK_PIN_NO(4) | 2)
-#define MT8135_PIN_4_MSDC0_CMD__FUNC_A_FUNC_DOUT_0 (MTK_PIN_NO(4) | 3)
-#define MT8135_PIN_4_MSDC0_CMD__FUNC_USB_TEST_IO_0 (MTK_PIN_NO(4) | 5)
-#define MT8135_PIN_4_MSDC0_CMD__FUNC_LRSTB_2X (MTK_PIN_NO(4) | 6)
-#define MT8135_PIN_4_MSDC0_CMD__FUNC_NRNB (MTK_PIN_NO(4) | 7)
-
-#define MT8135_PIN_5_MSDC0_CLK__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
-#define MT8135_PIN_5_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(5) | 1)
-#define MT8135_PIN_5_MSDC0_CLK__FUNC_EINT40 (MTK_PIN_NO(5) | 2)
-#define MT8135_PIN_5_MSDC0_CLK__FUNC_A_FUNC_DOUT_1 (MTK_PIN_NO(5) | 3)
-#define MT8135_PIN_5_MSDC0_CLK__FUNC_USB_TEST_IO_1 (MTK_PIN_NO(5) | 5)
-#define MT8135_PIN_5_MSDC0_CLK__FUNC_LPTE (MTK_PIN_NO(5) | 6)
-#define MT8135_PIN_5_MSDC0_CLK__FUNC_NREB (MTK_PIN_NO(5) | 7)
-
-#define MT8135_PIN_6_MSDC0_DAT3__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
-#define MT8135_PIN_6_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(6) | 1)
-#define MT8135_PIN_6_MSDC0_DAT3__FUNC_EINT45 (MTK_PIN_NO(6) | 2)
-#define MT8135_PIN_6_MSDC0_DAT3__FUNC_A_FUNC_DOUT_2 (MTK_PIN_NO(6) | 3)
-#define MT8135_PIN_6_MSDC0_DAT3__FUNC_USB_TEST_IO_2 (MTK_PIN_NO(6) | 5)
-#define MT8135_PIN_6_MSDC0_DAT3__FUNC_LSCE0B_2X (MTK_PIN_NO(6) | 6)
-#define MT8135_PIN_6_MSDC0_DAT3__FUNC_NLD7 (MTK_PIN_NO(6) | 7)
-
-#define MT8135_PIN_7_MSDC0_DAT2__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
-#define MT8135_PIN_7_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(7) | 1)
-#define MT8135_PIN_7_MSDC0_DAT2__FUNC_EINT44 (MTK_PIN_NO(7) | 2)
-#define MT8135_PIN_7_MSDC0_DAT2__FUNC_A_FUNC_DOUT_3 (MTK_PIN_NO(7) | 3)
-#define MT8135_PIN_7_MSDC0_DAT2__FUNC_USB_TEST_IO_3 (MTK_PIN_NO(7) | 5)
-#define MT8135_PIN_7_MSDC0_DAT2__FUNC_LSA0_2X (MTK_PIN_NO(7) | 6)
-#define MT8135_PIN_7_MSDC0_DAT2__FUNC_NLD14 (MTK_PIN_NO(7) | 7)
-
-#define MT8135_PIN_8_MSDC0_DAT1__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
-#define MT8135_PIN_8_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(8) | 1)
-#define MT8135_PIN_8_MSDC0_DAT1__FUNC_EINT43 (MTK_PIN_NO(8) | 2)
-#define MT8135_PIN_8_MSDC0_DAT1__FUNC_USB_TEST_IO_4 (MTK_PIN_NO(8) | 5)
-#define MT8135_PIN_8_MSDC0_DAT1__FUNC_LSCK_2X (MTK_PIN_NO(8) | 6)
-#define MT8135_PIN_8_MSDC0_DAT1__FUNC_NLD11 (MTK_PIN_NO(8) | 7)
-
-#define MT8135_PIN_9_MSDC0_DAT0__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
-#define MT8135_PIN_9_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(9) | 1)
-#define MT8135_PIN_9_MSDC0_DAT0__FUNC_EINT42 (MTK_PIN_NO(9) | 2)
-#define MT8135_PIN_9_MSDC0_DAT0__FUNC_USB_TEST_IO_5 (MTK_PIN_NO(9) | 5)
-#define MT8135_PIN_9_MSDC0_DAT0__FUNC_LSDA_2X (MTK_PIN_NO(9) | 6)
-
-#define MT8135_PIN_10_NCEB0__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
-#define MT8135_PIN_10_NCEB0__FUNC_NCEB0 (MTK_PIN_NO(10) | 1)
-#define MT8135_PIN_10_NCEB0__FUNC_EINT139 (MTK_PIN_NO(10) | 2)
-#define MT8135_PIN_10_NCEB0__FUNC_TESTA_OUT4 (MTK_PIN_NO(10) | 7)
-
-#define MT8135_PIN_11_NCEB1__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
-#define MT8135_PIN_11_NCEB1__FUNC_NCEB1 (MTK_PIN_NO(11) | 1)
-#define MT8135_PIN_11_NCEB1__FUNC_EINT140 (MTK_PIN_NO(11) | 2)
-#define MT8135_PIN_11_NCEB1__FUNC_USB_DRVVBUS (MTK_PIN_NO(11) | 6)
-#define MT8135_PIN_11_NCEB1__FUNC_TESTA_OUT5 (MTK_PIN_NO(11) | 7)
-
-#define MT8135_PIN_12_NRNB__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
-#define MT8135_PIN_12_NRNB__FUNC_NRNB (MTK_PIN_NO(12) | 1)
-#define MT8135_PIN_12_NRNB__FUNC_EINT141 (MTK_PIN_NO(12) | 2)
-#define MT8135_PIN_12_NRNB__FUNC_A_FUNC_DOUT_4 (MTK_PIN_NO(12) | 3)
-#define MT8135_PIN_12_NRNB__FUNC_TESTA_OUT6 (MTK_PIN_NO(12) | 7)
-
-#define MT8135_PIN_13_NCLE__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
-#define MT8135_PIN_13_NCLE__FUNC_NCLE (MTK_PIN_NO(13) | 1)
-#define MT8135_PIN_13_NCLE__FUNC_EINT142 (MTK_PIN_NO(13) | 2)
-#define MT8135_PIN_13_NCLE__FUNC_A_FUNC_DOUT_5 (MTK_PIN_NO(13) | 3)
-#define MT8135_PIN_13_NCLE__FUNC_CM2PDN_1X (MTK_PIN_NO(13) | 4)
-#define MT8135_PIN_13_NCLE__FUNC_NALE (MTK_PIN_NO(13) | 6)
-#define MT8135_PIN_13_NCLE__FUNC_TESTA_OUT7 (MTK_PIN_NO(13) | 7)
-
-#define MT8135_PIN_14_NALE__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
-#define MT8135_PIN_14_NALE__FUNC_NALE (MTK_PIN_NO(14) | 1)
-#define MT8135_PIN_14_NALE__FUNC_EINT143 (MTK_PIN_NO(14) | 2)
-#define MT8135_PIN_14_NALE__FUNC_A_FUNC_DOUT_6 (MTK_PIN_NO(14) | 3)
-#define MT8135_PIN_14_NALE__FUNC_CM2MCLK_1X (MTK_PIN_NO(14) | 4)
-#define MT8135_PIN_14_NALE__FUNC_IRDA_RXD (MTK_PIN_NO(14) | 5)
-#define MT8135_PIN_14_NALE__FUNC_NCLE (MTK_PIN_NO(14) | 6)
-#define MT8135_PIN_14_NALE__FUNC_TESTA_OUT8 (MTK_PIN_NO(14) | 7)
-
-#define MT8135_PIN_15_NREB__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
-#define MT8135_PIN_15_NREB__FUNC_NREB (MTK_PIN_NO(15) | 1)
-#define MT8135_PIN_15_NREB__FUNC_EINT144 (MTK_PIN_NO(15) | 2)
-#define MT8135_PIN_15_NREB__FUNC_A_FUNC_DOUT_7 (MTK_PIN_NO(15) | 3)
-#define MT8135_PIN_15_NREB__FUNC_CM2RST_1X (MTK_PIN_NO(15) | 4)
-#define MT8135_PIN_15_NREB__FUNC_IRDA_TXD (MTK_PIN_NO(15) | 5)
-#define MT8135_PIN_15_NREB__FUNC_TESTA_OUT9 (MTK_PIN_NO(15) | 7)
-
-#define MT8135_PIN_16_NWEB__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
-#define MT8135_PIN_16_NWEB__FUNC_NWEB (MTK_PIN_NO(16) | 1)
-#define MT8135_PIN_16_NWEB__FUNC_EINT145 (MTK_PIN_NO(16) | 2)
-#define MT8135_PIN_16_NWEB__FUNC_A_FUNC_DIN_0 (MTK_PIN_NO(16) | 3)
-#define MT8135_PIN_16_NWEB__FUNC_CM2PCLK_1X (MTK_PIN_NO(16) | 4)
-#define MT8135_PIN_16_NWEB__FUNC_IRDA_PDN (MTK_PIN_NO(16) | 5)
-#define MT8135_PIN_16_NWEB__FUNC_TESTA_OUT10 (MTK_PIN_NO(16) | 7)
-
-#define MT8135_PIN_17_NLD0__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
-#define MT8135_PIN_17_NLD0__FUNC_NLD0 (MTK_PIN_NO(17) | 1)
-#define MT8135_PIN_17_NLD0__FUNC_EINT146 (MTK_PIN_NO(17) | 2)
-#define MT8135_PIN_17_NLD0__FUNC_A_FUNC_DIN_1 (MTK_PIN_NO(17) | 3)
-#define MT8135_PIN_17_NLD0__FUNC_CM2DAT_1X_0 (MTK_PIN_NO(17) | 4)
-#define MT8135_PIN_17_NLD0__FUNC_I2SIN_CK (MTK_PIN_NO(17) | 5)
-#define MT8135_PIN_17_NLD0__FUNC_DAC_CK (MTK_PIN_NO(17) | 6)
-#define MT8135_PIN_17_NLD0__FUNC_TESTA_OUT11 (MTK_PIN_NO(17) | 7)
-
-#define MT8135_PIN_18_NLD1__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
-#define MT8135_PIN_18_NLD1__FUNC_NLD1 (MTK_PIN_NO(18) | 1)
-#define MT8135_PIN_18_NLD1__FUNC_EINT147 (MTK_PIN_NO(18) | 2)
-#define MT8135_PIN_18_NLD1__FUNC_A_FUNC_DIN_2 (MTK_PIN_NO(18) | 3)
-#define MT8135_PIN_18_NLD1__FUNC_CM2DAT_1X_1 (MTK_PIN_NO(18) | 4)
-#define MT8135_PIN_18_NLD1__FUNC_I2SIN_WS (MTK_PIN_NO(18) | 5)
-#define MT8135_PIN_18_NLD1__FUNC_DAC_WS (MTK_PIN_NO(18) | 6)
-#define MT8135_PIN_18_NLD1__FUNC_TESTA_OUT12 (MTK_PIN_NO(18) | 7)
-
-#define MT8135_PIN_19_NLD2__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
-#define MT8135_PIN_19_NLD2__FUNC_NLD2 (MTK_PIN_NO(19) | 1)
-#define MT8135_PIN_19_NLD2__FUNC_EINT148 (MTK_PIN_NO(19) | 2)
-#define MT8135_PIN_19_NLD2__FUNC_A_FUNC_DIN_3 (MTK_PIN_NO(19) | 3)
-#define MT8135_PIN_19_NLD2__FUNC_CM2DAT_1X_2 (MTK_PIN_NO(19) | 4)
-#define MT8135_PIN_19_NLD2__FUNC_I2SOUT_DAT (MTK_PIN_NO(19) | 5)
-#define MT8135_PIN_19_NLD2__FUNC_DAC_DAT_OUT (MTK_PIN_NO(19) | 6)
-#define MT8135_PIN_19_NLD2__FUNC_TESTA_OUT13 (MTK_PIN_NO(19) | 7)
-
-#define MT8135_PIN_20_NLD3__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
-#define MT8135_PIN_20_NLD3__FUNC_NLD3 (MTK_PIN_NO(20) | 1)
-#define MT8135_PIN_20_NLD3__FUNC_EINT149 (MTK_PIN_NO(20) | 2)
-#define MT8135_PIN_20_NLD3__FUNC_A_FUNC_DIN_4 (MTK_PIN_NO(20) | 3)
-#define MT8135_PIN_20_NLD3__FUNC_CM2DAT_1X_3 (MTK_PIN_NO(20) | 4)
-#define MT8135_PIN_20_NLD3__FUNC_TESTA_OUT14 (MTK_PIN_NO(20) | 7)
-
-#define MT8135_PIN_21_NLD4__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
-#define MT8135_PIN_21_NLD4__FUNC_NLD4 (MTK_PIN_NO(21) | 1)
-#define MT8135_PIN_21_NLD4__FUNC_EINT150 (MTK_PIN_NO(21) | 2)
-#define MT8135_PIN_21_NLD4__FUNC_A_FUNC_DIN_5 (MTK_PIN_NO(21) | 3)
-#define MT8135_PIN_21_NLD4__FUNC_CM2DAT_1X_4 (MTK_PIN_NO(21) | 4)
-#define MT8135_PIN_21_NLD4__FUNC_TESTA_OUT15 (MTK_PIN_NO(21) | 7)
-
-#define MT8135_PIN_22_NLD5__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
-#define MT8135_PIN_22_NLD5__FUNC_NLD5 (MTK_PIN_NO(22) | 1)
-#define MT8135_PIN_22_NLD5__FUNC_EINT151 (MTK_PIN_NO(22) | 2)
-#define MT8135_PIN_22_NLD5__FUNC_A_FUNC_DIN_6 (MTK_PIN_NO(22) | 3)
-#define MT8135_PIN_22_NLD5__FUNC_CM2DAT_1X_5 (MTK_PIN_NO(22) | 4)
-#define MT8135_PIN_22_NLD5__FUNC_TESTA_OUT16 (MTK_PIN_NO(22) | 7)
-
-#define MT8135_PIN_23_NLD6__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
-#define MT8135_PIN_23_NLD6__FUNC_NLD6 (MTK_PIN_NO(23) | 1)
-#define MT8135_PIN_23_NLD6__FUNC_EINT152 (MTK_PIN_NO(23) | 2)
-#define MT8135_PIN_23_NLD6__FUNC_A_FUNC_DIN_7 (MTK_PIN_NO(23) | 3)
-#define MT8135_PIN_23_NLD6__FUNC_CM2DAT_1X_6 (MTK_PIN_NO(23) | 4)
-#define MT8135_PIN_23_NLD6__FUNC_TESTA_OUT17 (MTK_PIN_NO(23) | 7)
-
-#define MT8135_PIN_24_NLD7__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
-#define MT8135_PIN_24_NLD7__FUNC_NLD7 (MTK_PIN_NO(24) | 1)
-#define MT8135_PIN_24_NLD7__FUNC_EINT153 (MTK_PIN_NO(24) | 2)
-#define MT8135_PIN_24_NLD7__FUNC_A_FUNC_DIN_8 (MTK_PIN_NO(24) | 3)
-#define MT8135_PIN_24_NLD7__FUNC_CM2DAT_1X_7 (MTK_PIN_NO(24) | 4)
-#define MT8135_PIN_24_NLD7__FUNC_TESTA_OUT18 (MTK_PIN_NO(24) | 7)
-
-#define MT8135_PIN_25_NLD8__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
-#define MT8135_PIN_25_NLD8__FUNC_NLD8 (MTK_PIN_NO(25) | 1)
-#define MT8135_PIN_25_NLD8__FUNC_EINT154 (MTK_PIN_NO(25) | 2)
-#define MT8135_PIN_25_NLD8__FUNC_CM2DAT_1X_8 (MTK_PIN_NO(25) | 4)
-
-#define MT8135_PIN_26_NLD9__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
-#define MT8135_PIN_26_NLD9__FUNC_NLD9 (MTK_PIN_NO(26) | 1)
-#define MT8135_PIN_26_NLD9__FUNC_EINT155 (MTK_PIN_NO(26) | 2)
-#define MT8135_PIN_26_NLD9__FUNC_CM2DAT_1X_9 (MTK_PIN_NO(26) | 4)
-#define MT8135_PIN_26_NLD9__FUNC_PWM1 (MTK_PIN_NO(26) | 5)
-
-#define MT8135_PIN_27_NLD10__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
-#define MT8135_PIN_27_NLD10__FUNC_NLD10 (MTK_PIN_NO(27) | 1)
-#define MT8135_PIN_27_NLD10__FUNC_EINT156 (MTK_PIN_NO(27) | 2)
-#define MT8135_PIN_27_NLD10__FUNC_CM2VSYNC_1X (MTK_PIN_NO(27) | 4)
-#define MT8135_PIN_27_NLD10__FUNC_PWM2 (MTK_PIN_NO(27) | 5)
-
-#define MT8135_PIN_28_NLD11__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
-#define MT8135_PIN_28_NLD11__FUNC_NLD11 (MTK_PIN_NO(28) | 1)
-#define MT8135_PIN_28_NLD11__FUNC_EINT157 (MTK_PIN_NO(28) | 2)
-#define MT8135_PIN_28_NLD11__FUNC_CM2HSYNC_1X (MTK_PIN_NO(28) | 4)
-#define MT8135_PIN_28_NLD11__FUNC_PWM3 (MTK_PIN_NO(28) | 5)
-
-#define MT8135_PIN_29_NLD12__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
-#define MT8135_PIN_29_NLD12__FUNC_NLD12 (MTK_PIN_NO(29) | 1)
-#define MT8135_PIN_29_NLD12__FUNC_EINT158 (MTK_PIN_NO(29) | 2)
-#define MT8135_PIN_29_NLD12__FUNC_I2SIN_CK (MTK_PIN_NO(29) | 3)
-#define MT8135_PIN_29_NLD12__FUNC_DAC_CK (MTK_PIN_NO(29) | 4)
-#define MT8135_PIN_29_NLD12__FUNC_PCM1_CK (MTK_PIN_NO(29) | 5)
-
-#define MT8135_PIN_30_NLD13__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
-#define MT8135_PIN_30_NLD13__FUNC_NLD13 (MTK_PIN_NO(30) | 1)
-#define MT8135_PIN_30_NLD13__FUNC_EINT159 (MTK_PIN_NO(30) | 2)
-#define MT8135_PIN_30_NLD13__FUNC_I2SIN_WS (MTK_PIN_NO(30) | 3)
-#define MT8135_PIN_30_NLD13__FUNC_DAC_WS (MTK_PIN_NO(30) | 4)
-#define MT8135_PIN_30_NLD13__FUNC_PCM1_WS (MTK_PIN_NO(30) | 5)
-
-#define MT8135_PIN_31_NLD14__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
-#define MT8135_PIN_31_NLD14__FUNC_NLD14 (MTK_PIN_NO(31) | 1)
-#define MT8135_PIN_31_NLD14__FUNC_EINT160 (MTK_PIN_NO(31) | 2)
-#define MT8135_PIN_31_NLD14__FUNC_I2SOUT_DAT (MTK_PIN_NO(31) | 3)
-#define MT8135_PIN_31_NLD14__FUNC_DAC_DAT_OUT (MTK_PIN_NO(31) | 4)
-#define MT8135_PIN_31_NLD14__FUNC_PCM1_DO (MTK_PIN_NO(31) | 5)
-
-#define MT8135_PIN_32_NLD15__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
-#define MT8135_PIN_32_NLD15__FUNC_NLD15 (MTK_PIN_NO(32) | 1)
-#define MT8135_PIN_32_NLD15__FUNC_EINT161 (MTK_PIN_NO(32) | 2)
-#define MT8135_PIN_32_NLD15__FUNC_DISP_PWM (MTK_PIN_NO(32) | 3)
-#define MT8135_PIN_32_NLD15__FUNC_PWM4 (MTK_PIN_NO(32) | 4)
-#define MT8135_PIN_32_NLD15__FUNC_PCM1_DI (MTK_PIN_NO(32) | 5)
-
-#define MT8135_PIN_33_MSDC0_RSTB__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
-#define MT8135_PIN_33_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(33) | 1)
-#define MT8135_PIN_33_MSDC0_RSTB__FUNC_EINT50 (MTK_PIN_NO(33) | 2)
-#define MT8135_PIN_33_MSDC0_RSTB__FUNC_I2SIN_DAT (MTK_PIN_NO(33) | 3)
-#define MT8135_PIN_33_MSDC0_RSTB__FUNC_PCM1_DI (MTK_PIN_NO(33) | 5)
-#define MT8135_PIN_33_MSDC0_RSTB__FUNC_SPI1_MI (MTK_PIN_NO(33) | 6)
-#define MT8135_PIN_33_MSDC0_RSTB__FUNC_NLD10 (MTK_PIN_NO(33) | 7)
-
-#define MT8135_PIN_34_IDDIG__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
-#define MT8135_PIN_34_IDDIG__FUNC_IDDIG (MTK_PIN_NO(34) | 1)
-#define MT8135_PIN_34_IDDIG__FUNC_EINT34 (MTK_PIN_NO(34) | 2)
-
-#define MT8135_PIN_35_SCL3__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
-#define MT8135_PIN_35_SCL3__FUNC_SCL3 (MTK_PIN_NO(35) | 1)
-#define MT8135_PIN_35_SCL3__FUNC_EINT96 (MTK_PIN_NO(35) | 2)
-#define MT8135_PIN_35_SCL3__FUNC_CLKM6 (MTK_PIN_NO(35) | 3)
-#define MT8135_PIN_35_SCL3__FUNC_PWM6 (MTK_PIN_NO(35) | 4)
-
-#define MT8135_PIN_36_SDA3__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
-#define MT8135_PIN_36_SDA3__FUNC_SDA3 (MTK_PIN_NO(36) | 1)
-#define MT8135_PIN_36_SDA3__FUNC_EINT97 (MTK_PIN_NO(36) | 2)
-
-#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
-#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_AUD_CLK (MTK_PIN_NO(37) | 1)
-#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_ADC_CK (MTK_PIN_NO(37) | 2)
-#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_HDMI_SDATA0 (MTK_PIN_NO(37) | 3)
-#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_EINT19 (MTK_PIN_NO(37) | 4)
-#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_USB_TEST_IO_6 (MTK_PIN_NO(37) | 5)
-#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_TESTA_OUT19 (MTK_PIN_NO(37) | 7)
-
-#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
-#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_AUD_DAT_MOSI (MTK_PIN_NO(38) | 1)
-#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_ADC_WS (MTK_PIN_NO(38) | 2)
-#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_AUD_DAT_MISO (MTK_PIN_NO(38) | 3)
-#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_EINT21 (MTK_PIN_NO(38) | 4)
-#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_USB_TEST_IO_7 (MTK_PIN_NO(38) | 5)
-#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_TESTA_OUT20 (MTK_PIN_NO(38) | 7)
-
-#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
-#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_AUD_DAT_MISO (MTK_PIN_NO(39) | 1)
-#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_ADC_DAT_IN (MTK_PIN_NO(39) | 2)
-#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_AUD_DAT_MOSI (MTK_PIN_NO(39) | 3)
-#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_EINT20 (MTK_PIN_NO(39) | 4)
-#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_USB_TEST_IO_8 (MTK_PIN_NO(39) | 5)
-#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_TESTA_OUT21 (MTK_PIN_NO(39) | 7)
-
-#define MT8135_PIN_40_DAC_CLK__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
-#define MT8135_PIN_40_DAC_CLK__FUNC_DAC_CK (MTK_PIN_NO(40) | 1)
-#define MT8135_PIN_40_DAC_CLK__FUNC_EINT22 (MTK_PIN_NO(40) | 2)
-#define MT8135_PIN_40_DAC_CLK__FUNC_HDMI_SDATA1 (MTK_PIN_NO(40) | 3)
-#define MT8135_PIN_40_DAC_CLK__FUNC_USB_TEST_IO_9 (MTK_PIN_NO(40) | 5)
-#define MT8135_PIN_40_DAC_CLK__FUNC_TESTA_OUT22 (MTK_PIN_NO(40) | 7)
-
-#define MT8135_PIN_41_DAC_WS__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
-#define MT8135_PIN_41_DAC_WS__FUNC_DAC_WS (MTK_PIN_NO(41) | 1)
-#define MT8135_PIN_41_DAC_WS__FUNC_EINT24 (MTK_PIN_NO(41) | 2)
-#define MT8135_PIN_41_DAC_WS__FUNC_HDMI_SDATA2 (MTK_PIN_NO(41) | 3)
-#define MT8135_PIN_41_DAC_WS__FUNC_USB_TEST_IO_10 (MTK_PIN_NO(41) | 5)
-#define MT8135_PIN_41_DAC_WS__FUNC_TESTA_OUT23 (MTK_PIN_NO(41) | 7)
-
-#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
-#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_DAC_DAT_OUT (MTK_PIN_NO(42) | 1)
-#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_EINT23 (MTK_PIN_NO(42) | 2)
-#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_HDMI_SDATA3 (MTK_PIN_NO(42) | 3)
-#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_USB_TEST_IO_11 (MTK_PIN_NO(42) | 5)
-#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_TESTA_OUT24 (MTK_PIN_NO(42) | 7)
-
-#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
-#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDI (MTK_PIN_NO(43) | 1)
-#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_EINT29 (MTK_PIN_NO(43) | 2)
-
-#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
-#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDO (MTK_PIN_NO(44) | 1)
-#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_EINT28 (MTK_PIN_NO(44) | 2)
-
-#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
-#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_PWRAP_SPICS_B_I (MTK_PIN_NO(45) | 1)
-#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_EINT27 (MTK_PIN_NO(45) | 2)
-
-#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
-#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_PWRAP_SPICK_I (MTK_PIN_NO(46) | 1)
-#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_EINT26 (MTK_PIN_NO(46) | 2)
-
-#define MT8135_PIN_47_PWRAP_EVENT__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
-#define MT8135_PIN_47_PWRAP_EVENT__FUNC_PWRAP_EVENT_IN (MTK_PIN_NO(47) | 1)
-#define MT8135_PIN_47_PWRAP_EVENT__FUNC_EINT25 (MTK_PIN_NO(47) | 2)
-#define MT8135_PIN_47_PWRAP_EVENT__FUNC_TESTA_OUT2 (MTK_PIN_NO(47) | 7)
-
-#define MT8135_PIN_48_RTC32K_CK__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
-#define MT8135_PIN_48_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(48) | 1)
-
-#define MT8135_PIN_49_WATCHDOG__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
-#define MT8135_PIN_49_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(49) | 1)
-#define MT8135_PIN_49_WATCHDOG__FUNC_EINT36 (MTK_PIN_NO(49) | 2)
-
-#define MT8135_PIN_50_SRCLKENA__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
-#define MT8135_PIN_50_SRCLKENA__FUNC_SRCLKENA (MTK_PIN_NO(50) | 1)
-#define MT8135_PIN_50_SRCLKENA__FUNC_EINT38 (MTK_PIN_NO(50) | 2)
-
-#define MT8135_PIN_51_SRCVOLTEN__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
-#define MT8135_PIN_51_SRCVOLTEN__FUNC_SRCVOLTEN (MTK_PIN_NO(51) | 1)
-#define MT8135_PIN_51_SRCVOLTEN__FUNC_EINT37 (MTK_PIN_NO(51) | 2)
-
-#define MT8135_PIN_52_EINT0__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
-#define MT8135_PIN_52_EINT0__FUNC_EINT0 (MTK_PIN_NO(52) | 1)
-#define MT8135_PIN_52_EINT0__FUNC_PWM1 (MTK_PIN_NO(52) | 2)
-#define MT8135_PIN_52_EINT0__FUNC_CLKM0 (MTK_PIN_NO(52) | 3)
-#define MT8135_PIN_52_EINT0__FUNC_SPDIF_OUT (MTK_PIN_NO(52) | 4)
-#define MT8135_PIN_52_EINT0__FUNC_USB_TEST_IO_12 (MTK_PIN_NO(52) | 5)
-#define MT8135_PIN_52_EINT0__FUNC_USB_SCL (MTK_PIN_NO(52) | 7)
-
-#define MT8135_PIN_53_URXD2__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
-#define MT8135_PIN_53_URXD2__FUNC_URXD2 (MTK_PIN_NO(53) | 1)
-#define MT8135_PIN_53_URXD2__FUNC_EINT83 (MTK_PIN_NO(53) | 2)
-#define MT8135_PIN_53_URXD2__FUNC_HDMI_LRCK (MTK_PIN_NO(53) | 4)
-#define MT8135_PIN_53_URXD2__FUNC_CLKM3 (MTK_PIN_NO(53) | 5)
-#define MT8135_PIN_53_URXD2__FUNC_UTXD2 (MTK_PIN_NO(53) | 7)
-
-#define MT8135_PIN_54_UTXD2__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
-#define MT8135_PIN_54_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(54) | 1)
-#define MT8135_PIN_54_UTXD2__FUNC_EINT82 (MTK_PIN_NO(54) | 2)
-#define MT8135_PIN_54_UTXD2__FUNC_HDMI_BCK_OUT (MTK_PIN_NO(54) | 4)
-#define MT8135_PIN_54_UTXD2__FUNC_CLKM2 (MTK_PIN_NO(54) | 5)
-#define MT8135_PIN_54_UTXD2__FUNC_URXD2 (MTK_PIN_NO(54) | 7)
-
-#define MT8135_PIN_55_UCTS2__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
-#define MT8135_PIN_55_UCTS2__FUNC_UCTS2 (MTK_PIN_NO(55) | 1)
-#define MT8135_PIN_55_UCTS2__FUNC_EINT84 (MTK_PIN_NO(55) | 2)
-#define MT8135_PIN_55_UCTS2__FUNC_PWM1 (MTK_PIN_NO(55) | 5)
-#define MT8135_PIN_55_UCTS2__FUNC_URTS2 (MTK_PIN_NO(55) | 7)
-
-#define MT8135_PIN_56_URTS2__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
-#define MT8135_PIN_56_URTS2__FUNC_URTS2 (MTK_PIN_NO(56) | 1)
-#define MT8135_PIN_56_URTS2__FUNC_EINT85 (MTK_PIN_NO(56) | 2)
-#define MT8135_PIN_56_URTS2__FUNC_PWM2 (MTK_PIN_NO(56) | 5)
-#define MT8135_PIN_56_URTS2__FUNC_UCTS2 (MTK_PIN_NO(56) | 7)
-
-#define MT8135_PIN_57_JTCK__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
-#define MT8135_PIN_57_JTCK__FUNC_JTCK (MTK_PIN_NO(57) | 1)
-#define MT8135_PIN_57_JTCK__FUNC_EINT188 (MTK_PIN_NO(57) | 2)
-#define MT8135_PIN_57_JTCK__FUNC_DSP1_ICK (MTK_PIN_NO(57) | 3)
-
-#define MT8135_PIN_58_JTDO__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
-#define MT8135_PIN_58_JTDO__FUNC_JTDO (MTK_PIN_NO(58) | 1)
-#define MT8135_PIN_58_JTDO__FUNC_EINT190 (MTK_PIN_NO(58) | 2)
-#define MT8135_PIN_58_JTDO__FUNC_DSP2_IMS (MTK_PIN_NO(58) | 3)
-
-#define MT8135_PIN_59_JTRST_B__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
-#define MT8135_PIN_59_JTRST_B__FUNC_JTRST_B (MTK_PIN_NO(59) | 1)
-#define MT8135_PIN_59_JTRST_B__FUNC_EINT0 (MTK_PIN_NO(59) | 2)
-#define MT8135_PIN_59_JTRST_B__FUNC_DSP2_ICK (MTK_PIN_NO(59) | 3)
-
-#define MT8135_PIN_60_JTDI__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
-#define MT8135_PIN_60_JTDI__FUNC_JTDI (MTK_PIN_NO(60) | 1)
-#define MT8135_PIN_60_JTDI__FUNC_EINT189 (MTK_PIN_NO(60) | 2)
-#define MT8135_PIN_60_JTDI__FUNC_DSP1_IMS (MTK_PIN_NO(60) | 3)
-
-#define MT8135_PIN_61_JRTCK__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
-#define MT8135_PIN_61_JRTCK__FUNC_JRTCK (MTK_PIN_NO(61) | 1)
-#define MT8135_PIN_61_JRTCK__FUNC_EINT187 (MTK_PIN_NO(61) | 2)
-#define MT8135_PIN_61_JRTCK__FUNC_DSP1_ID (MTK_PIN_NO(61) | 3)
-
-#define MT8135_PIN_62_JTMS__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
-#define MT8135_PIN_62_JTMS__FUNC_JTMS (MTK_PIN_NO(62) | 1)
-#define MT8135_PIN_62_JTMS__FUNC_EINT191 (MTK_PIN_NO(62) | 2)
-#define MT8135_PIN_62_JTMS__FUNC_DSP2_ID (MTK_PIN_NO(62) | 3)
-
-#define MT8135_PIN_63_MSDC1_INSI__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
-#define MT8135_PIN_63_MSDC1_INSI__FUNC_MSDC1_INSI (MTK_PIN_NO(63) | 1)
-#define MT8135_PIN_63_MSDC1_INSI__FUNC_SCL5 (MTK_PIN_NO(63) | 3)
-#define MT8135_PIN_63_MSDC1_INSI__FUNC_PWM6 (MTK_PIN_NO(63) | 4)
-#define MT8135_PIN_63_MSDC1_INSI__FUNC_CLKM5 (MTK_PIN_NO(63) | 5)
-#define MT8135_PIN_63_MSDC1_INSI__FUNC_TESTB_OUT6 (MTK_PIN_NO(63) | 7)
-
-#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
-#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_MSDC1_SDWPI (MTK_PIN_NO(64) | 1)
-#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_EINT58 (MTK_PIN_NO(64) | 2)
-#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_SDA5 (MTK_PIN_NO(64) | 3)
-#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_PWM7 (MTK_PIN_NO(64) | 4)
-#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_CLKM6 (MTK_PIN_NO(64) | 5)
-#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_TESTB_OUT7 (MTK_PIN_NO(64) | 7)
-
-#define MT8135_PIN_65_MSDC2_INSI__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
-#define MT8135_PIN_65_MSDC2_INSI__FUNC_MSDC2_INSI (MTK_PIN_NO(65) | 1)
-#define MT8135_PIN_65_MSDC2_INSI__FUNC_USB_TEST_IO_27 (MTK_PIN_NO(65) | 5)
-#define MT8135_PIN_65_MSDC2_INSI__FUNC_TESTA_OUT3 (MTK_PIN_NO(65) | 7)
-
-#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_GPIO66 (MTK_PIN_NO(66) | 0)
-#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_MSDC2_SDWPI (MTK_PIN_NO(66) | 1)
-#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_EINT66 (MTK_PIN_NO(66) | 2)
-#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_USB_TEST_IO_28 (MTK_PIN_NO(66) | 5)
-
-#define MT8135_PIN_67_URXD4__FUNC_GPIO67 (MTK_PIN_NO(67) | 0)
-#define MT8135_PIN_67_URXD4__FUNC_URXD4 (MTK_PIN_NO(67) | 1)
-#define MT8135_PIN_67_URXD4__FUNC_EINT89 (MTK_PIN_NO(67) | 2)
-#define MT8135_PIN_67_URXD4__FUNC_URXD1 (MTK_PIN_NO(67) | 3)
-#define MT8135_PIN_67_URXD4__FUNC_UTXD4 (MTK_PIN_NO(67) | 6)
-#define MT8135_PIN_67_URXD4__FUNC_TESTB_OUT10 (MTK_PIN_NO(67) | 7)
-
-#define MT8135_PIN_68_UTXD4__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
-#define MT8135_PIN_68_UTXD4__FUNC_UTXD4 (MTK_PIN_NO(68) | 1)
-#define MT8135_PIN_68_UTXD4__FUNC_EINT88 (MTK_PIN_NO(68) | 2)
-#define MT8135_PIN_68_UTXD4__FUNC_UTXD1 (MTK_PIN_NO(68) | 3)
-#define MT8135_PIN_68_UTXD4__FUNC_URXD4 (MTK_PIN_NO(68) | 6)
-#define MT8135_PIN_68_UTXD4__FUNC_TESTB_OUT11 (MTK_PIN_NO(68) | 7)
-
-#define MT8135_PIN_69_URXD1__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
-#define MT8135_PIN_69_URXD1__FUNC_URXD1 (MTK_PIN_NO(69) | 1)
-#define MT8135_PIN_69_URXD1__FUNC_EINT79 (MTK_PIN_NO(69) | 2)
-#define MT8135_PIN_69_URXD1__FUNC_URXD4 (MTK_PIN_NO(69) | 3)
-#define MT8135_PIN_69_URXD1__FUNC_UTXD1 (MTK_PIN_NO(69) | 6)
-#define MT8135_PIN_69_URXD1__FUNC_TESTB_OUT24 (MTK_PIN_NO(69) | 7)
-
-#define MT8135_PIN_70_UTXD1__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
-#define MT8135_PIN_70_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(70) | 1)
-#define MT8135_PIN_70_UTXD1__FUNC_EINT78 (MTK_PIN_NO(70) | 2)
-#define MT8135_PIN_70_UTXD1__FUNC_UTXD4 (MTK_PIN_NO(70) | 3)
-#define MT8135_PIN_70_UTXD1__FUNC_URXD1 (MTK_PIN_NO(70) | 6)
-#define MT8135_PIN_70_UTXD1__FUNC_TESTB_OUT25 (MTK_PIN_NO(70) | 7)
-
-#define MT8135_PIN_71_UCTS1__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
-#define MT8135_PIN_71_UCTS1__FUNC_UCTS1 (MTK_PIN_NO(71) | 1)
-#define MT8135_PIN_71_UCTS1__FUNC_EINT80 (MTK_PIN_NO(71) | 2)
-#define MT8135_PIN_71_UCTS1__FUNC_CLKM0 (MTK_PIN_NO(71) | 5)
-#define MT8135_PIN_71_UCTS1__FUNC_URTS1 (MTK_PIN_NO(71) | 6)
-#define MT8135_PIN_71_UCTS1__FUNC_TESTB_OUT31 (MTK_PIN_NO(71) | 7)
-
-#define MT8135_PIN_72_URTS1__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
-#define MT8135_PIN_72_URTS1__FUNC_URTS1 (MTK_PIN_NO(72) | 1)
-#define MT8135_PIN_72_URTS1__FUNC_EINT81 (MTK_PIN_NO(72) | 2)
-#define MT8135_PIN_72_URTS1__FUNC_CLKM1 (MTK_PIN_NO(72) | 5)
-#define MT8135_PIN_72_URTS1__FUNC_UCTS1 (MTK_PIN_NO(72) | 6)
-#define MT8135_PIN_72_URTS1__FUNC_TESTB_OUT21 (MTK_PIN_NO(72) | 7)
-
-#define MT8135_PIN_73_PWM1__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
-#define MT8135_PIN_73_PWM1__FUNC_PWM1 (MTK_PIN_NO(73) | 1)
-#define MT8135_PIN_73_PWM1__FUNC_EINT73 (MTK_PIN_NO(73) | 2)
-#define MT8135_PIN_73_PWM1__FUNC_USB_DRVVBUS (MTK_PIN_NO(73) | 5)
-#define MT8135_PIN_73_PWM1__FUNC_DISP_PWM (MTK_PIN_NO(73) | 6)
-#define MT8135_PIN_73_PWM1__FUNC_TESTB_OUT8 (MTK_PIN_NO(73) | 7)
-
-#define MT8135_PIN_74_PWM2__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
-#define MT8135_PIN_74_PWM2__FUNC_PWM2 (MTK_PIN_NO(74) | 1)
-#define MT8135_PIN_74_PWM2__FUNC_EINT74 (MTK_PIN_NO(74) | 2)
-#define MT8135_PIN_74_PWM2__FUNC_DPI33_CK (MTK_PIN_NO(74) | 3)
-#define MT8135_PIN_74_PWM2__FUNC_PWM5 (MTK_PIN_NO(74) | 4)
-#define MT8135_PIN_74_PWM2__FUNC_URXD2 (MTK_PIN_NO(74) | 5)
-#define MT8135_PIN_74_PWM2__FUNC_DISP_PWM (MTK_PIN_NO(74) | 6)
-#define MT8135_PIN_74_PWM2__FUNC_TESTB_OUT9 (MTK_PIN_NO(74) | 7)
-
-#define MT8135_PIN_75_PWM3__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
-#define MT8135_PIN_75_PWM3__FUNC_PWM3 (MTK_PIN_NO(75) | 1)
-#define MT8135_PIN_75_PWM3__FUNC_EINT75 (MTK_PIN_NO(75) | 2)
-#define MT8135_PIN_75_PWM3__FUNC_DPI33_D0 (MTK_PIN_NO(75) | 3)
-#define MT8135_PIN_75_PWM3__FUNC_PWM6 (MTK_PIN_NO(75) | 4)
-#define MT8135_PIN_75_PWM3__FUNC_UTXD2 (MTK_PIN_NO(75) | 5)
-#define MT8135_PIN_75_PWM3__FUNC_DISP_PWM (MTK_PIN_NO(75) | 6)
-#define MT8135_PIN_75_PWM3__FUNC_TESTB_OUT12 (MTK_PIN_NO(75) | 7)
-
-#define MT8135_PIN_76_PWM4__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
-#define MT8135_PIN_76_PWM4__FUNC_PWM4 (MTK_PIN_NO(76) | 1)
-#define MT8135_PIN_76_PWM4__FUNC_EINT76 (MTK_PIN_NO(76) | 2)
-#define MT8135_PIN_76_PWM4__FUNC_DPI33_D1 (MTK_PIN_NO(76) | 3)
-#define MT8135_PIN_76_PWM4__FUNC_PWM7 (MTK_PIN_NO(76) | 4)
-#define MT8135_PIN_76_PWM4__FUNC_DISP_PWM (MTK_PIN_NO(76) | 6)
-#define MT8135_PIN_76_PWM4__FUNC_TESTB_OUT13 (MTK_PIN_NO(76) | 7)
-
-#define MT8135_PIN_77_MSDC2_DAT2__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
-#define MT8135_PIN_77_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(77) | 1)
-#define MT8135_PIN_77_MSDC2_DAT2__FUNC_EINT63 (MTK_PIN_NO(77) | 2)
-#define MT8135_PIN_77_MSDC2_DAT2__FUNC_DSP2_IMS (MTK_PIN_NO(77) | 4)
-#define MT8135_PIN_77_MSDC2_DAT2__FUNC_DPI33_D6 (MTK_PIN_NO(77) | 6)
-#define MT8135_PIN_77_MSDC2_DAT2__FUNC_TESTA_OUT25 (MTK_PIN_NO(77) | 7)
-
-#define MT8135_PIN_78_MSDC2_DAT3__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
-#define MT8135_PIN_78_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(78) | 1)
-#define MT8135_PIN_78_MSDC2_DAT3__FUNC_EINT64 (MTK_PIN_NO(78) | 2)
-#define MT8135_PIN_78_MSDC2_DAT3__FUNC_DSP2_ID (MTK_PIN_NO(78) | 4)
-#define MT8135_PIN_78_MSDC2_DAT3__FUNC_DPI33_D7 (MTK_PIN_NO(78) | 6)
-#define MT8135_PIN_78_MSDC2_DAT3__FUNC_TESTA_OUT26 (MTK_PIN_NO(78) | 7)
-
-#define MT8135_PIN_79_MSDC2_CMD__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
-#define MT8135_PIN_79_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(79) | 1)
-#define MT8135_PIN_79_MSDC2_CMD__FUNC_EINT60 (MTK_PIN_NO(79) | 2)
-#define MT8135_PIN_79_MSDC2_CMD__FUNC_DSP1_IMS (MTK_PIN_NO(79) | 4)
-#define MT8135_PIN_79_MSDC2_CMD__FUNC_PCM1_WS (MTK_PIN_NO(79) | 5)
-#define MT8135_PIN_79_MSDC2_CMD__FUNC_DPI33_D3 (MTK_PIN_NO(79) | 6)
-#define MT8135_PIN_79_MSDC2_CMD__FUNC_TESTA_OUT0 (MTK_PIN_NO(79) | 7)
-
-#define MT8135_PIN_80_MSDC2_CLK__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
-#define MT8135_PIN_80_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(80) | 1)
-#define MT8135_PIN_80_MSDC2_CLK__FUNC_EINT59 (MTK_PIN_NO(80) | 2)
-#define MT8135_PIN_80_MSDC2_CLK__FUNC_DSP1_ICK (MTK_PIN_NO(80) | 4)
-#define MT8135_PIN_80_MSDC2_CLK__FUNC_PCM1_CK (MTK_PIN_NO(80) | 5)
-#define MT8135_PIN_80_MSDC2_CLK__FUNC_DPI33_D2 (MTK_PIN_NO(80) | 6)
-#define MT8135_PIN_80_MSDC2_CLK__FUNC_TESTA_OUT1 (MTK_PIN_NO(80) | 7)
-
-#define MT8135_PIN_81_MSDC2_DAT1__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
-#define MT8135_PIN_81_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(81) | 1)
-#define MT8135_PIN_81_MSDC2_DAT1__FUNC_EINT62 (MTK_PIN_NO(81) | 2)
-#define MT8135_PIN_81_MSDC2_DAT1__FUNC_DSP2_ICK (MTK_PIN_NO(81) | 4)
-#define MT8135_PIN_81_MSDC2_DAT1__FUNC_PCM1_DO (MTK_PIN_NO(81) | 5)
-#define MT8135_PIN_81_MSDC2_DAT1__FUNC_DPI33_D5 (MTK_PIN_NO(81) | 6)
-
-#define MT8135_PIN_82_MSDC2_DAT0__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
-#define MT8135_PIN_82_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(82) | 1)
-#define MT8135_PIN_82_MSDC2_DAT0__FUNC_EINT61 (MTK_PIN_NO(82) | 2)
-#define MT8135_PIN_82_MSDC2_DAT0__FUNC_DSP1_ID (MTK_PIN_NO(82) | 4)
-#define MT8135_PIN_82_MSDC2_DAT0__FUNC_PCM1_DI (MTK_PIN_NO(82) | 5)
-#define MT8135_PIN_82_MSDC2_DAT0__FUNC_DPI33_D4 (MTK_PIN_NO(82) | 6)
-
-#define MT8135_PIN_83_MSDC1_DAT0__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
-#define MT8135_PIN_83_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(83) | 1)
-#define MT8135_PIN_83_MSDC1_DAT0__FUNC_EINT53 (MTK_PIN_NO(83) | 2)
-#define MT8135_PIN_83_MSDC1_DAT0__FUNC_SCL1 (MTK_PIN_NO(83) | 3)
-#define MT8135_PIN_83_MSDC1_DAT0__FUNC_PWM2 (MTK_PIN_NO(83) | 4)
-#define MT8135_PIN_83_MSDC1_DAT0__FUNC_CLKM1 (MTK_PIN_NO(83) | 5)
-#define MT8135_PIN_83_MSDC1_DAT0__FUNC_TESTB_OUT2 (MTK_PIN_NO(83) | 7)
-
-#define MT8135_PIN_84_MSDC1_DAT1__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
-#define MT8135_PIN_84_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(84) | 1)
-#define MT8135_PIN_84_MSDC1_DAT1__FUNC_EINT54 (MTK_PIN_NO(84) | 2)
-#define MT8135_PIN_84_MSDC1_DAT1__FUNC_SDA1 (MTK_PIN_NO(84) | 3)
-#define MT8135_PIN_84_MSDC1_DAT1__FUNC_PWM3 (MTK_PIN_NO(84) | 4)
-#define MT8135_PIN_84_MSDC1_DAT1__FUNC_CLKM2 (MTK_PIN_NO(84) | 5)
-#define MT8135_PIN_84_MSDC1_DAT1__FUNC_TESTB_OUT3 (MTK_PIN_NO(84) | 7)
-
-#define MT8135_PIN_85_MSDC1_CMD__FUNC_GPIO85 (MTK_PIN_NO(85) | 0)
-#define MT8135_PIN_85_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(85) | 1)
-#define MT8135_PIN_85_MSDC1_CMD__FUNC_EINT52 (MTK_PIN_NO(85) | 2)
-#define MT8135_PIN_85_MSDC1_CMD__FUNC_SDA0 (MTK_PIN_NO(85) | 3)
-#define MT8135_PIN_85_MSDC1_CMD__FUNC_PWM1 (MTK_PIN_NO(85) | 4)
-#define MT8135_PIN_85_MSDC1_CMD__FUNC_CLKM0 (MTK_PIN_NO(85) | 5)
-#define MT8135_PIN_85_MSDC1_CMD__FUNC_TESTB_OUT1 (MTK_PIN_NO(85) | 7)
-
-#define MT8135_PIN_86_MSDC1_CLK__FUNC_GPIO86 (MTK_PIN_NO(86) | 0)
-#define MT8135_PIN_86_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(86) | 1)
-#define MT8135_PIN_86_MSDC1_CLK__FUNC_EINT51 (MTK_PIN_NO(86) | 2)
-#define MT8135_PIN_86_MSDC1_CLK__FUNC_SCL0 (MTK_PIN_NO(86) | 3)
-#define MT8135_PIN_86_MSDC1_CLK__FUNC_DISP_PWM (MTK_PIN_NO(86) | 4)
-#define MT8135_PIN_86_MSDC1_CLK__FUNC_TESTB_OUT0 (MTK_PIN_NO(86) | 7)
-
-#define MT8135_PIN_87_MSDC1_DAT2__FUNC_GPIO87 (MTK_PIN_NO(87) | 0)
-#define MT8135_PIN_87_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(87) | 1)
-#define MT8135_PIN_87_MSDC1_DAT2__FUNC_EINT55 (MTK_PIN_NO(87) | 2)
-#define MT8135_PIN_87_MSDC1_DAT2__FUNC_SCL4 (MTK_PIN_NO(87) | 3)
-#define MT8135_PIN_87_MSDC1_DAT2__FUNC_PWM4 (MTK_PIN_NO(87) | 4)
-#define MT8135_PIN_87_MSDC1_DAT2__FUNC_CLKM3 (MTK_PIN_NO(87) | 5)
-#define MT8135_PIN_87_MSDC1_DAT2__FUNC_TESTB_OUT4 (MTK_PIN_NO(87) | 7)
-
-#define MT8135_PIN_88_MSDC1_DAT3__FUNC_GPIO88 (MTK_PIN_NO(88) | 0)
-#define MT8135_PIN_88_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(88) | 1)
-#define MT8135_PIN_88_MSDC1_DAT3__FUNC_EINT56 (MTK_PIN_NO(88) | 2)
-#define MT8135_PIN_88_MSDC1_DAT3__FUNC_SDA4 (MTK_PIN_NO(88) | 3)
-#define MT8135_PIN_88_MSDC1_DAT3__FUNC_PWM5 (MTK_PIN_NO(88) | 4)
-#define MT8135_PIN_88_MSDC1_DAT3__FUNC_CLKM4 (MTK_PIN_NO(88) | 5)
-#define MT8135_PIN_88_MSDC1_DAT3__FUNC_TESTB_OUT5 (MTK_PIN_NO(88) | 7)
-
-#define MT8135_PIN_89_MSDC4_DAT0__FUNC_GPIO89 (MTK_PIN_NO(89) | 0)
-#define MT8135_PIN_89_MSDC4_DAT0__FUNC_MSDC4_DAT0 (MTK_PIN_NO(89) | 1)
-#define MT8135_PIN_89_MSDC4_DAT0__FUNC_EINT133 (MTK_PIN_NO(89) | 2)
-#define MT8135_PIN_89_MSDC4_DAT0__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(89) | 4)
-#define MT8135_PIN_89_MSDC4_DAT0__FUNC_USB_DRVVBUS (MTK_PIN_NO(89) | 5)
-#define MT8135_PIN_89_MSDC4_DAT0__FUNC_A_FUNC_DIN_9 (MTK_PIN_NO(89) | 6)
-#define MT8135_PIN_89_MSDC4_DAT0__FUNC_LPTE (MTK_PIN_NO(89) | 7)
-
-#define MT8135_PIN_90_MSDC4_DAT1__FUNC_GPIO90 (MTK_PIN_NO(90) | 0)
-#define MT8135_PIN_90_MSDC4_DAT1__FUNC_MSDC4_DAT1 (MTK_PIN_NO(90) | 1)
-#define MT8135_PIN_90_MSDC4_DAT1__FUNC_EINT134 (MTK_PIN_NO(90) | 2)
-#define MT8135_PIN_90_MSDC4_DAT1__FUNC_A_FUNC_DIN_10 (MTK_PIN_NO(90) | 6)
-#define MT8135_PIN_90_MSDC4_DAT1__FUNC_LRSTB_1X (MTK_PIN_NO(90) | 7)
-
-#define MT8135_PIN_91_MSDC4_DAT5__FUNC_GPIO91 (MTK_PIN_NO(91) | 0)
-#define MT8135_PIN_91_MSDC4_DAT5__FUNC_MSDC4_DAT5 (MTK_PIN_NO(91) | 1)
-#define MT8135_PIN_91_MSDC4_DAT5__FUNC_EINT136 (MTK_PIN_NO(91) | 2)
-#define MT8135_PIN_91_MSDC4_DAT5__FUNC_I2SIN_WS (MTK_PIN_NO(91) | 3)
-#define MT8135_PIN_91_MSDC4_DAT5__FUNC_DAC_WS (MTK_PIN_NO(91) | 4)
-#define MT8135_PIN_91_MSDC4_DAT5__FUNC_PCM1_WS (MTK_PIN_NO(91) | 5)
-#define MT8135_PIN_91_MSDC4_DAT5__FUNC_A_FUNC_DIN_11 (MTK_PIN_NO(91) | 6)
-#define MT8135_PIN_91_MSDC4_DAT5__FUNC_SPI1_CSN (MTK_PIN_NO(91) | 7)
-
-#define MT8135_PIN_92_MSDC4_DAT6__FUNC_GPIO92 (MTK_PIN_NO(92) | 0)
-#define MT8135_PIN_92_MSDC4_DAT6__FUNC_MSDC4_DAT6 (MTK_PIN_NO(92) | 1)
-#define MT8135_PIN_92_MSDC4_DAT6__FUNC_EINT137 (MTK_PIN_NO(92) | 2)
-#define MT8135_PIN_92_MSDC4_DAT6__FUNC_I2SOUT_DAT (MTK_PIN_NO(92) | 3)
-#define MT8135_PIN_92_MSDC4_DAT6__FUNC_DAC_DAT_OUT (MTK_PIN_NO(92) | 4)
-#define MT8135_PIN_92_MSDC4_DAT6__FUNC_PCM1_DO (MTK_PIN_NO(92) | 5)
-#define MT8135_PIN_92_MSDC4_DAT6__FUNC_A_FUNC_DIN_12 (MTK_PIN_NO(92) | 6)
-#define MT8135_PIN_92_MSDC4_DAT6__FUNC_SPI1_MO (MTK_PIN_NO(92) | 7)
-
-#define MT8135_PIN_93_MSDC4_DAT7__FUNC_GPIO93 (MTK_PIN_NO(93) | 0)
-#define MT8135_PIN_93_MSDC4_DAT7__FUNC_MSDC4_DAT7 (MTK_PIN_NO(93) | 1)
-#define MT8135_PIN_93_MSDC4_DAT7__FUNC_EINT138 (MTK_PIN_NO(93) | 2)
-#define MT8135_PIN_93_MSDC4_DAT7__FUNC_I2SIN_DAT (MTK_PIN_NO(93) | 3)
-#define MT8135_PIN_93_MSDC4_DAT7__FUNC_PCM1_DI (MTK_PIN_NO(93) | 5)
-#define MT8135_PIN_93_MSDC4_DAT7__FUNC_A_FUNC_DIN_13 (MTK_PIN_NO(93) | 6)
-#define MT8135_PIN_93_MSDC4_DAT7__FUNC_SPI1_MI (MTK_PIN_NO(93) | 7)
-
-#define MT8135_PIN_94_MSDC4_DAT4__FUNC_GPIO94 (MTK_PIN_NO(94) | 0)
-#define MT8135_PIN_94_MSDC4_DAT4__FUNC_MSDC4_DAT4 (MTK_PIN_NO(94) | 1)
-#define MT8135_PIN_94_MSDC4_DAT4__FUNC_EINT135 (MTK_PIN_NO(94) | 2)
-#define MT8135_PIN_94_MSDC4_DAT4__FUNC_I2SIN_CK (MTK_PIN_NO(94) | 3)
-#define MT8135_PIN_94_MSDC4_DAT4__FUNC_DAC_CK (MTK_PIN_NO(94) | 4)
-#define MT8135_PIN_94_MSDC4_DAT4__FUNC_PCM1_CK (MTK_PIN_NO(94) | 5)
-#define MT8135_PIN_94_MSDC4_DAT4__FUNC_A_FUNC_DIN_14 (MTK_PIN_NO(94) | 6)
-#define MT8135_PIN_94_MSDC4_DAT4__FUNC_SPI1_CLK (MTK_PIN_NO(94) | 7)
-
-#define MT8135_PIN_95_MSDC4_DAT2__FUNC_GPIO95 (MTK_PIN_NO(95) | 0)
-#define MT8135_PIN_95_MSDC4_DAT2__FUNC_MSDC4_DAT2 (MTK_PIN_NO(95) | 1)
-#define MT8135_PIN_95_MSDC4_DAT2__FUNC_EINT131 (MTK_PIN_NO(95) | 2)
-#define MT8135_PIN_95_MSDC4_DAT2__FUNC_I2SIN_WS (MTK_PIN_NO(95) | 3)
-#define MT8135_PIN_95_MSDC4_DAT2__FUNC_CM2PDN_2X (MTK_PIN_NO(95) | 4)
-#define MT8135_PIN_95_MSDC4_DAT2__FUNC_DAC_WS (MTK_PIN_NO(95) | 5)
-#define MT8135_PIN_95_MSDC4_DAT2__FUNC_PCM1_WS (MTK_PIN_NO(95) | 6)
-#define MT8135_PIN_95_MSDC4_DAT2__FUNC_LSCE0B_1X (MTK_PIN_NO(95) | 7)
-
-#define MT8135_PIN_96_MSDC4_CLK__FUNC_GPIO96 (MTK_PIN_NO(96) | 0)
-#define MT8135_PIN_96_MSDC4_CLK__FUNC_MSDC4_CLK (MTK_PIN_NO(96) | 1)
-#define MT8135_PIN_96_MSDC4_CLK__FUNC_EINT129 (MTK_PIN_NO(96) | 2)
-#define MT8135_PIN_96_MSDC4_CLK__FUNC_DPI1_CK_2X (MTK_PIN_NO(96) | 3)
-#define MT8135_PIN_96_MSDC4_CLK__FUNC_CM2PCLK_2X (MTK_PIN_NO(96) | 4)
-#define MT8135_PIN_96_MSDC4_CLK__FUNC_PWM4 (MTK_PIN_NO(96) | 5)
-#define MT8135_PIN_96_MSDC4_CLK__FUNC_PCM1_DI (MTK_PIN_NO(96) | 6)
-#define MT8135_PIN_96_MSDC4_CLK__FUNC_LSCK_1X (MTK_PIN_NO(96) | 7)
-
-#define MT8135_PIN_97_MSDC4_DAT3__FUNC_GPIO97 (MTK_PIN_NO(97) | 0)
-#define MT8135_PIN_97_MSDC4_DAT3__FUNC_MSDC4_DAT3 (MTK_PIN_NO(97) | 1)
-#define MT8135_PIN_97_MSDC4_DAT3__FUNC_EINT132 (MTK_PIN_NO(97) | 2)
-#define MT8135_PIN_97_MSDC4_DAT3__FUNC_I2SOUT_DAT (MTK_PIN_NO(97) | 3)
-#define MT8135_PIN_97_MSDC4_DAT3__FUNC_CM2RST_2X (MTK_PIN_NO(97) | 4)
-#define MT8135_PIN_97_MSDC4_DAT3__FUNC_DAC_DAT_OUT (MTK_PIN_NO(97) | 5)
-#define MT8135_PIN_97_MSDC4_DAT3__FUNC_PCM1_DO (MTK_PIN_NO(97) | 6)
-#define MT8135_PIN_97_MSDC4_DAT3__FUNC_LSCE1B_1X (MTK_PIN_NO(97) | 7)
-
-#define MT8135_PIN_98_MSDC4_CMD__FUNC_GPIO98 (MTK_PIN_NO(98) | 0)
-#define MT8135_PIN_98_MSDC4_CMD__FUNC_MSDC4_CMD (MTK_PIN_NO(98) | 1)
-#define MT8135_PIN_98_MSDC4_CMD__FUNC_EINT128 (MTK_PIN_NO(98) | 2)
-#define MT8135_PIN_98_MSDC4_CMD__FUNC_DPI1_DE_2X (MTK_PIN_NO(98) | 3)
-#define MT8135_PIN_98_MSDC4_CMD__FUNC_PWM3 (MTK_PIN_NO(98) | 5)
-#define MT8135_PIN_98_MSDC4_CMD__FUNC_LSDA_1X (MTK_PIN_NO(98) | 7)
-
-#define MT8135_PIN_99_MSDC4_RSTB__FUNC_GPIO99 (MTK_PIN_NO(99) | 0)
-#define MT8135_PIN_99_MSDC4_RSTB__FUNC_MSDC4_RSTB (MTK_PIN_NO(99) | 1)
-#define MT8135_PIN_99_MSDC4_RSTB__FUNC_EINT130 (MTK_PIN_NO(99) | 2)
-#define MT8135_PIN_99_MSDC4_RSTB__FUNC_I2SIN_CK (MTK_PIN_NO(99) | 3)
-#define MT8135_PIN_99_MSDC4_RSTB__FUNC_CM2MCLK_2X (MTK_PIN_NO(99) | 4)
-#define MT8135_PIN_99_MSDC4_RSTB__FUNC_DAC_CK (MTK_PIN_NO(99) | 5)
-#define MT8135_PIN_99_MSDC4_RSTB__FUNC_PCM1_CK (MTK_PIN_NO(99) | 6)
-#define MT8135_PIN_99_MSDC4_RSTB__FUNC_LSA0_1X (MTK_PIN_NO(99) | 7)
-
-#define MT8135_PIN_100_SDA0__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
-#define MT8135_PIN_100_SDA0__FUNC_SDA0 (MTK_PIN_NO(100) | 1)
-#define MT8135_PIN_100_SDA0__FUNC_EINT91 (MTK_PIN_NO(100) | 2)
-#define MT8135_PIN_100_SDA0__FUNC_CLKM1 (MTK_PIN_NO(100) | 3)
-#define MT8135_PIN_100_SDA0__FUNC_PWM1 (MTK_PIN_NO(100) | 4)
-#define MT8135_PIN_100_SDA0__FUNC_A_FUNC_DIN_15 (MTK_PIN_NO(100) | 7)
-
-#define MT8135_PIN_101_SCL0__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
-#define MT8135_PIN_101_SCL0__FUNC_SCL0 (MTK_PIN_NO(101) | 1)
-#define MT8135_PIN_101_SCL0__FUNC_EINT90 (MTK_PIN_NO(101) | 2)
-#define MT8135_PIN_101_SCL0__FUNC_CLKM0 (MTK_PIN_NO(101) | 3)
-#define MT8135_PIN_101_SCL0__FUNC_DISP_PWM (MTK_PIN_NO(101) | 4)
-#define MT8135_PIN_101_SCL0__FUNC_A_FUNC_DIN_16 (MTK_PIN_NO(101) | 7)
-
-#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
-#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_EINT10 (MTK_PIN_NO(102) | 1)
-#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_USB_TEST_IO_16 (MTK_PIN_NO(102) | 5)
-#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_TESTB_OUT16 (MTK_PIN_NO(102) | 6)
-#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_A_FUNC_DIN_17 (MTK_PIN_NO(102) | 7)
-
-#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
-#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_EINT11 (MTK_PIN_NO(103) | 1)
-#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_USB_TEST_IO_17 (MTK_PIN_NO(103) | 5)
-#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_TESTB_OUT17 (MTK_PIN_NO(103) | 6)
-#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_A_FUNC_DIN_18 (MTK_PIN_NO(103) | 7)
-
-#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
-#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_EINT16 (MTK_PIN_NO(104) | 1)
-#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_USB_TEST_IO_18 (MTK_PIN_NO(104) | 5)
-#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_TESTB_OUT18 (MTK_PIN_NO(104) | 6)
-#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_A_FUNC_DIN_19 (MTK_PIN_NO(104) | 7)
-
-#define MT8135_PIN_105_I2S_CLK__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
-#define MT8135_PIN_105_I2S_CLK__FUNC_I2SIN_CK (MTK_PIN_NO(105) | 1)
-#define MT8135_PIN_105_I2S_CLK__FUNC_EINT10 (MTK_PIN_NO(105) | 2)
-#define MT8135_PIN_105_I2S_CLK__FUNC_DAC_CK (MTK_PIN_NO(105) | 3)
-#define MT8135_PIN_105_I2S_CLK__FUNC_PCM1_CK (MTK_PIN_NO(105) | 4)
-#define MT8135_PIN_105_I2S_CLK__FUNC_USB_TEST_IO_19 (MTK_PIN_NO(105) | 5)
-#define MT8135_PIN_105_I2S_CLK__FUNC_TESTB_OUT19 (MTK_PIN_NO(105) | 6)
-#define MT8135_PIN_105_I2S_CLK__FUNC_A_FUNC_DIN_20 (MTK_PIN_NO(105) | 7)
-
-#define MT8135_PIN_106_I2S_WS__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
-#define MT8135_PIN_106_I2S_WS__FUNC_I2SIN_WS (MTK_PIN_NO(106) | 1)
-#define MT8135_PIN_106_I2S_WS__FUNC_EINT13 (MTK_PIN_NO(106) | 2)
-#define MT8135_PIN_106_I2S_WS__FUNC_DAC_WS (MTK_PIN_NO(106) | 3)
-#define MT8135_PIN_106_I2S_WS__FUNC_PCM1_WS (MTK_PIN_NO(106) | 4)
-#define MT8135_PIN_106_I2S_WS__FUNC_USB_TEST_IO_20 (MTK_PIN_NO(106) | 5)
-#define MT8135_PIN_106_I2S_WS__FUNC_TESTB_OUT20 (MTK_PIN_NO(106) | 6)
-#define MT8135_PIN_106_I2S_WS__FUNC_A_FUNC_DIN_21 (MTK_PIN_NO(106) | 7)
-
-#define MT8135_PIN_107_I2S_DATA_IN__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
-#define MT8135_PIN_107_I2S_DATA_IN__FUNC_I2SIN_DAT (MTK_PIN_NO(107) | 1)
-#define MT8135_PIN_107_I2S_DATA_IN__FUNC_EINT11 (MTK_PIN_NO(107) | 2)
-#define MT8135_PIN_107_I2S_DATA_IN__FUNC_PCM1_DI (MTK_PIN_NO(107) | 4)
-#define MT8135_PIN_107_I2S_DATA_IN__FUNC_USB_TEST_IO_21 (MTK_PIN_NO(107) | 5)
-#define MT8135_PIN_107_I2S_DATA_IN__FUNC_TESTB_OUT22 (MTK_PIN_NO(107) | 6)
-#define MT8135_PIN_107_I2S_DATA_IN__FUNC_A_FUNC_DIN_22 (MTK_PIN_NO(107) | 7)
-
-#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
-#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_I2SOUT_DAT (MTK_PIN_NO(108) | 1)
-#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_EINT12 (MTK_PIN_NO(108) | 2)
-#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_DAC_DAT_OUT (MTK_PIN_NO(108) | 3)
-#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_PCM1_DO (MTK_PIN_NO(108) | 4)
-#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_USB_TEST_IO_22 (MTK_PIN_NO(108) | 5)
-#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_TESTB_OUT23 (MTK_PIN_NO(108) | 6)
-#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_A_FUNC_DIN_23 (MTK_PIN_NO(108) | 7)
-
-#define MT8135_PIN_109_EINT5__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
-#define MT8135_PIN_109_EINT5__FUNC_EINT5 (MTK_PIN_NO(109) | 1)
-#define MT8135_PIN_109_EINT5__FUNC_PWM5 (MTK_PIN_NO(109) | 2)
-#define MT8135_PIN_109_EINT5__FUNC_CLKM3 (MTK_PIN_NO(109) | 3)
-#define MT8135_PIN_109_EINT5__FUNC_GPU_JTRSTB (MTK_PIN_NO(109) | 4)
-#define MT8135_PIN_109_EINT5__FUNC_USB_TEST_IO_23 (MTK_PIN_NO(109) | 5)
-#define MT8135_PIN_109_EINT5__FUNC_TESTB_OUT26 (MTK_PIN_NO(109) | 6)
-#define MT8135_PIN_109_EINT5__FUNC_A_FUNC_DIN_24 (MTK_PIN_NO(109) | 7)
-
-#define MT8135_PIN_110_EINT6__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
-#define MT8135_PIN_110_EINT6__FUNC_EINT6 (MTK_PIN_NO(110) | 1)
-#define MT8135_PIN_110_EINT6__FUNC_PWM6 (MTK_PIN_NO(110) | 2)
-#define MT8135_PIN_110_EINT6__FUNC_CLKM4 (MTK_PIN_NO(110) | 3)
-#define MT8135_PIN_110_EINT6__FUNC_GPU_JTMS (MTK_PIN_NO(110) | 4)
-#define MT8135_PIN_110_EINT6__FUNC_USB_TEST_IO_24 (MTK_PIN_NO(110) | 5)
-#define MT8135_PIN_110_EINT6__FUNC_TESTB_OUT27 (MTK_PIN_NO(110) | 6)
-#define MT8135_PIN_110_EINT6__FUNC_A_FUNC_DIN_25 (MTK_PIN_NO(110) | 7)
-
-#define MT8135_PIN_111_EINT7__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
-#define MT8135_PIN_111_EINT7__FUNC_EINT7 (MTK_PIN_NO(111) | 1)
-#define MT8135_PIN_111_EINT7__FUNC_PWM7 (MTK_PIN_NO(111) | 2)
-#define MT8135_PIN_111_EINT7__FUNC_CLKM5 (MTK_PIN_NO(111) | 3)
-#define MT8135_PIN_111_EINT7__FUNC_GPU_JTDO (MTK_PIN_NO(111) | 4)
-#define MT8135_PIN_111_EINT7__FUNC_USB_TEST_IO_25 (MTK_PIN_NO(111) | 5)
-#define MT8135_PIN_111_EINT7__FUNC_TESTB_OUT28 (MTK_PIN_NO(111) | 6)
-#define MT8135_PIN_111_EINT7__FUNC_A_FUNC_DIN_26 (MTK_PIN_NO(111) | 7)
-
-#define MT8135_PIN_112_EINT8__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
-#define MT8135_PIN_112_EINT8__FUNC_EINT8 (MTK_PIN_NO(112) | 1)
-#define MT8135_PIN_112_EINT8__FUNC_DISP_PWM (MTK_PIN_NO(112) | 2)
-#define MT8135_PIN_112_EINT8__FUNC_CLKM6 (MTK_PIN_NO(112) | 3)
-#define MT8135_PIN_112_EINT8__FUNC_GPU_JTDI (MTK_PIN_NO(112) | 4)
-#define MT8135_PIN_112_EINT8__FUNC_USB_TEST_IO_26 (MTK_PIN_NO(112) | 5)
-#define MT8135_PIN_112_EINT8__FUNC_TESTB_OUT29 (MTK_PIN_NO(112) | 6)
-#define MT8135_PIN_112_EINT8__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(112) | 7)
-
-#define MT8135_PIN_113_EINT9__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
-#define MT8135_PIN_113_EINT9__FUNC_EINT9 (MTK_PIN_NO(113) | 1)
-#define MT8135_PIN_113_EINT9__FUNC_GPU_JTCK (MTK_PIN_NO(113) | 4)
-#define MT8135_PIN_113_EINT9__FUNC_USB_DRVVBUS (MTK_PIN_NO(113) | 5)
-#define MT8135_PIN_113_EINT9__FUNC_TESTB_OUT30 (MTK_PIN_NO(113) | 6)
-#define MT8135_PIN_113_EINT9__FUNC_A_FUNC_DIN_27 (MTK_PIN_NO(113) | 7)
-
-#define MT8135_PIN_114_LPCE1B__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
-#define MT8135_PIN_114_LPCE1B__FUNC_LPCE1B (MTK_PIN_NO(114) | 1)
-#define MT8135_PIN_114_LPCE1B__FUNC_EINT127 (MTK_PIN_NO(114) | 2)
-#define MT8135_PIN_114_LPCE1B__FUNC_PWM2 (MTK_PIN_NO(114) | 5)
-#define MT8135_PIN_114_LPCE1B__FUNC_TESTB_OUT14 (MTK_PIN_NO(114) | 6)
-#define MT8135_PIN_114_LPCE1B__FUNC_A_FUNC_DIN_28 (MTK_PIN_NO(114) | 7)
-
-#define MT8135_PIN_115_LPCE0B__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
-#define MT8135_PIN_115_LPCE0B__FUNC_LPCE0B (MTK_PIN_NO(115) | 1)
-#define MT8135_PIN_115_LPCE0B__FUNC_EINT126 (MTK_PIN_NO(115) | 2)
-#define MT8135_PIN_115_LPCE0B__FUNC_PWM1 (MTK_PIN_NO(115) | 5)
-#define MT8135_PIN_115_LPCE0B__FUNC_TESTB_OUT15 (MTK_PIN_NO(115) | 6)
-#define MT8135_PIN_115_LPCE0B__FUNC_A_FUNC_DIN_29 (MTK_PIN_NO(115) | 7)
-
-#define MT8135_PIN_116_DISP_PWM__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
-#define MT8135_PIN_116_DISP_PWM__FUNC_DISP_PWM (MTK_PIN_NO(116) | 1)
-#define MT8135_PIN_116_DISP_PWM__FUNC_EINT77 (MTK_PIN_NO(116) | 2)
-#define MT8135_PIN_116_DISP_PWM__FUNC_LSDI (MTK_PIN_NO(116) | 3)
-#define MT8135_PIN_116_DISP_PWM__FUNC_PWM1 (MTK_PIN_NO(116) | 4)
-#define MT8135_PIN_116_DISP_PWM__FUNC_PWM2 (MTK_PIN_NO(116) | 5)
-#define MT8135_PIN_116_DISP_PWM__FUNC_PWM3 (MTK_PIN_NO(116) | 7)
-
-#define MT8135_PIN_117_EINT1__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
-#define MT8135_PIN_117_EINT1__FUNC_EINT1 (MTK_PIN_NO(117) | 1)
-#define MT8135_PIN_117_EINT1__FUNC_PWM2 (MTK_PIN_NO(117) | 2)
-#define MT8135_PIN_117_EINT1__FUNC_CLKM1 (MTK_PIN_NO(117) | 3)
-#define MT8135_PIN_117_EINT1__FUNC_USB_TEST_IO_13 (MTK_PIN_NO(117) | 5)
-#define MT8135_PIN_117_EINT1__FUNC_USB_SDA (MTK_PIN_NO(117) | 7)
-
-#define MT8135_PIN_118_EINT2__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
-#define MT8135_PIN_118_EINT2__FUNC_EINT2 (MTK_PIN_NO(118) | 1)
-#define MT8135_PIN_118_EINT2__FUNC_PWM3 (MTK_PIN_NO(118) | 2)
-#define MT8135_PIN_118_EINT2__FUNC_CLKM2 (MTK_PIN_NO(118) | 3)
-#define MT8135_PIN_118_EINT2__FUNC_USB_TEST_IO_14 (MTK_PIN_NO(118) | 5)
-#define MT8135_PIN_118_EINT2__FUNC_SRCLKENAI2 (MTK_PIN_NO(118) | 6)
-#define MT8135_PIN_118_EINT2__FUNC_A_FUNC_DIN_30 (MTK_PIN_NO(118) | 7)
-
-#define MT8135_PIN_119_EINT3__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
-#define MT8135_PIN_119_EINT3__FUNC_EINT3 (MTK_PIN_NO(119) | 1)
-#define MT8135_PIN_119_EINT3__FUNC_USB_TEST_IO_15 (MTK_PIN_NO(119) | 5)
-#define MT8135_PIN_119_EINT3__FUNC_SRCLKENAI1 (MTK_PIN_NO(119) | 6)
-#define MT8135_PIN_119_EINT3__FUNC_EXT_26M_CK (MTK_PIN_NO(119) | 7)
-
-#define MT8135_PIN_120_EINT4__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
-#define MT8135_PIN_120_EINT4__FUNC_EINT4 (MTK_PIN_NO(120) | 1)
-#define MT8135_PIN_120_EINT4__FUNC_PWM4 (MTK_PIN_NO(120) | 2)
-#define MT8135_PIN_120_EINT4__FUNC_USB_DRVVBUS (MTK_PIN_NO(120) | 5)
-#define MT8135_PIN_120_EINT4__FUNC_A_FUNC_DIN_31 (MTK_PIN_NO(120) | 7)
-
-#define MT8135_PIN_121_DPIDE__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
-#define MT8135_PIN_121_DPIDE__FUNC_DPI0_DE (MTK_PIN_NO(121) | 1)
-#define MT8135_PIN_121_DPIDE__FUNC_EINT100 (MTK_PIN_NO(121) | 2)
-#define MT8135_PIN_121_DPIDE__FUNC_I2SOUT_DAT (MTK_PIN_NO(121) | 3)
-#define MT8135_PIN_121_DPIDE__FUNC_DAC_DAT_OUT (MTK_PIN_NO(121) | 4)
-#define MT8135_PIN_121_DPIDE__FUNC_PCM1_DO (MTK_PIN_NO(121) | 5)
-#define MT8135_PIN_121_DPIDE__FUNC_IRDA_TXD (MTK_PIN_NO(121) | 6)
-
-#define MT8135_PIN_122_DPICK__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
-#define MT8135_PIN_122_DPICK__FUNC_DPI0_CK (MTK_PIN_NO(122) | 1)
-#define MT8135_PIN_122_DPICK__FUNC_EINT101 (MTK_PIN_NO(122) | 2)
-#define MT8135_PIN_122_DPICK__FUNC_I2SIN_DAT (MTK_PIN_NO(122) | 3)
-#define MT8135_PIN_122_DPICK__FUNC_PCM1_DI (MTK_PIN_NO(122) | 5)
-#define MT8135_PIN_122_DPICK__FUNC_IRDA_PDN (MTK_PIN_NO(122) | 6)
-
-#define MT8135_PIN_123_DPIG4__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
-#define MT8135_PIN_123_DPIG4__FUNC_DPI0_G4 (MTK_PIN_NO(123) | 1)
-#define MT8135_PIN_123_DPIG4__FUNC_EINT114 (MTK_PIN_NO(123) | 2)
-#define MT8135_PIN_123_DPIG4__FUNC_CM2DAT_2X_0 (MTK_PIN_NO(123) | 4)
-#define MT8135_PIN_123_DPIG4__FUNC_DSP2_ID (MTK_PIN_NO(123) | 5)
-
-#define MT8135_PIN_124_DPIG5__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
-#define MT8135_PIN_124_DPIG5__FUNC_DPI0_G5 (MTK_PIN_NO(124) | 1)
-#define MT8135_PIN_124_DPIG5__FUNC_EINT115 (MTK_PIN_NO(124) | 2)
-#define MT8135_PIN_124_DPIG5__FUNC_CM2DAT_2X_1 (MTK_PIN_NO(124) | 4)
-#define MT8135_PIN_124_DPIG5__FUNC_DSP2_ICK (MTK_PIN_NO(124) | 5)
-
-#define MT8135_PIN_125_DPIR3__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
-#define MT8135_PIN_125_DPIR3__FUNC_DPI0_R3 (MTK_PIN_NO(125) | 1)
-#define MT8135_PIN_125_DPIR3__FUNC_EINT121 (MTK_PIN_NO(125) | 2)
-#define MT8135_PIN_125_DPIR3__FUNC_CM2DAT_2X_7 (MTK_PIN_NO(125) | 4)
-
-#define MT8135_PIN_126_DPIG1__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
-#define MT8135_PIN_126_DPIG1__FUNC_DPI0_G1 (MTK_PIN_NO(126) | 1)
-#define MT8135_PIN_126_DPIG1__FUNC_EINT111 (MTK_PIN_NO(126) | 2)
-#define MT8135_PIN_126_DPIG1__FUNC_DSP1_ICK (MTK_PIN_NO(126) | 5)
-
-#define MT8135_PIN_127_DPIVSYNC__FUNC_GPIO127 (MTK_PIN_NO(127) | 0)
-#define MT8135_PIN_127_DPIVSYNC__FUNC_DPI0_VSYNC (MTK_PIN_NO(127) | 1)
-#define MT8135_PIN_127_DPIVSYNC__FUNC_EINT98 (MTK_PIN_NO(127) | 2)
-#define MT8135_PIN_127_DPIVSYNC__FUNC_I2SIN_CK (MTK_PIN_NO(127) | 3)
-#define MT8135_PIN_127_DPIVSYNC__FUNC_DAC_CK (MTK_PIN_NO(127) | 4)
-#define MT8135_PIN_127_DPIVSYNC__FUNC_PCM1_CK (MTK_PIN_NO(127) | 5)
-
-#define MT8135_PIN_128_DPIHSYNC__FUNC_GPIO128 (MTK_PIN_NO(128) | 0)
-#define MT8135_PIN_128_DPIHSYNC__FUNC_DPI0_HSYNC (MTK_PIN_NO(128) | 1)
-#define MT8135_PIN_128_DPIHSYNC__FUNC_EINT99 (MTK_PIN_NO(128) | 2)
-#define MT8135_PIN_128_DPIHSYNC__FUNC_I2SIN_WS (MTK_PIN_NO(128) | 3)
-#define MT8135_PIN_128_DPIHSYNC__FUNC_DAC_WS (MTK_PIN_NO(128) | 4)
-#define MT8135_PIN_128_DPIHSYNC__FUNC_PCM1_WS (MTK_PIN_NO(128) | 5)
-#define MT8135_PIN_128_DPIHSYNC__FUNC_IRDA_RXD (MTK_PIN_NO(128) | 6)
-
-#define MT8135_PIN_129_DPIB0__FUNC_GPIO129 (MTK_PIN_NO(129) | 0)
-#define MT8135_PIN_129_DPIB0__FUNC_DPI0_B0 (MTK_PIN_NO(129) | 1)
-#define MT8135_PIN_129_DPIB0__FUNC_EINT102 (MTK_PIN_NO(129) | 2)
-#define MT8135_PIN_129_DPIB0__FUNC_SCL0 (MTK_PIN_NO(129) | 4)
-#define MT8135_PIN_129_DPIB0__FUNC_DISP_PWM (MTK_PIN_NO(129) | 5)
-
-#define MT8135_PIN_130_DPIB1__FUNC_GPIO130 (MTK_PIN_NO(130) | 0)
-#define MT8135_PIN_130_DPIB1__FUNC_DPI0_B1 (MTK_PIN_NO(130) | 1)
-#define MT8135_PIN_130_DPIB1__FUNC_EINT103 (MTK_PIN_NO(130) | 2)
-#define MT8135_PIN_130_DPIB1__FUNC_CLKM0 (MTK_PIN_NO(130) | 3)
-#define MT8135_PIN_130_DPIB1__FUNC_SDA0 (MTK_PIN_NO(130) | 4)
-#define MT8135_PIN_130_DPIB1__FUNC_PWM1 (MTK_PIN_NO(130) | 5)
-
-#define MT8135_PIN_131_DPIB2__FUNC_GPIO131 (MTK_PIN_NO(131) | 0)
-#define MT8135_PIN_131_DPIB2__FUNC_DPI0_B2 (MTK_PIN_NO(131) | 1)
-#define MT8135_PIN_131_DPIB2__FUNC_EINT104 (MTK_PIN_NO(131) | 2)
-#define MT8135_PIN_131_DPIB2__FUNC_CLKM1 (MTK_PIN_NO(131) | 3)
-#define MT8135_PIN_131_DPIB2__FUNC_SCL1 (MTK_PIN_NO(131) | 4)
-#define MT8135_PIN_131_DPIB2__FUNC_PWM2 (MTK_PIN_NO(131) | 5)
-
-#define MT8135_PIN_132_DPIB3__FUNC_GPIO132 (MTK_PIN_NO(132) | 0)
-#define MT8135_PIN_132_DPIB3__FUNC_DPI0_B3 (MTK_PIN_NO(132) | 1)
-#define MT8135_PIN_132_DPIB3__FUNC_EINT105 (MTK_PIN_NO(132) | 2)
-#define MT8135_PIN_132_DPIB3__FUNC_CLKM2 (MTK_PIN_NO(132) | 3)
-#define MT8135_PIN_132_DPIB3__FUNC_SDA1 (MTK_PIN_NO(132) | 4)
-#define MT8135_PIN_132_DPIB3__FUNC_PWM3 (MTK_PIN_NO(132) | 5)
-
-#define MT8135_PIN_133_DPIB4__FUNC_GPIO133 (MTK_PIN_NO(133) | 0)
-#define MT8135_PIN_133_DPIB4__FUNC_DPI0_B4 (MTK_PIN_NO(133) | 1)
-#define MT8135_PIN_133_DPIB4__FUNC_EINT106 (MTK_PIN_NO(133) | 2)
-#define MT8135_PIN_133_DPIB4__FUNC_CLKM3 (MTK_PIN_NO(133) | 3)
-#define MT8135_PIN_133_DPIB4__FUNC_SCL2 (MTK_PIN_NO(133) | 4)
-#define MT8135_PIN_133_DPIB4__FUNC_PWM4 (MTK_PIN_NO(133) | 5)
-
-#define MT8135_PIN_134_DPIB5__FUNC_GPIO134 (MTK_PIN_NO(134) | 0)
-#define MT8135_PIN_134_DPIB5__FUNC_DPI0_B5 (MTK_PIN_NO(134) | 1)
-#define MT8135_PIN_134_DPIB5__FUNC_EINT107 (MTK_PIN_NO(134) | 2)
-#define MT8135_PIN_134_DPIB5__FUNC_CLKM4 (MTK_PIN_NO(134) | 3)
-#define MT8135_PIN_134_DPIB5__FUNC_SDA2 (MTK_PIN_NO(134) | 4)
-#define MT8135_PIN_134_DPIB5__FUNC_PWM5 (MTK_PIN_NO(134) | 5)
-
-#define MT8135_PIN_135_DPIB6__FUNC_GPIO135 (MTK_PIN_NO(135) | 0)
-#define MT8135_PIN_135_DPIB6__FUNC_DPI0_B6 (MTK_PIN_NO(135) | 1)
-#define MT8135_PIN_135_DPIB6__FUNC_EINT108 (MTK_PIN_NO(135) | 2)
-#define MT8135_PIN_135_DPIB6__FUNC_CLKM5 (MTK_PIN_NO(135) | 3)
-#define MT8135_PIN_135_DPIB6__FUNC_SCL3 (MTK_PIN_NO(135) | 4)
-#define MT8135_PIN_135_DPIB6__FUNC_PWM6 (MTK_PIN_NO(135) | 5)
-
-#define MT8135_PIN_136_DPIB7__FUNC_GPIO136 (MTK_PIN_NO(136) | 0)
-#define MT8135_PIN_136_DPIB7__FUNC_DPI0_B7 (MTK_PIN_NO(136) | 1)
-#define MT8135_PIN_136_DPIB7__FUNC_EINT109 (MTK_PIN_NO(136) | 2)
-#define MT8135_PIN_136_DPIB7__FUNC_CLKM6 (MTK_PIN_NO(136) | 3)
-#define MT8135_PIN_136_DPIB7__FUNC_SDA3 (MTK_PIN_NO(136) | 4)
-#define MT8135_PIN_136_DPIB7__FUNC_PWM7 (MTK_PIN_NO(136) | 5)
-
-#define MT8135_PIN_137_DPIG0__FUNC_GPIO137 (MTK_PIN_NO(137) | 0)
-#define MT8135_PIN_137_DPIG0__FUNC_DPI0_G0 (MTK_PIN_NO(137) | 1)
-#define MT8135_PIN_137_DPIG0__FUNC_EINT110 (MTK_PIN_NO(137) | 2)
-#define MT8135_PIN_137_DPIG0__FUNC_DSP1_ID (MTK_PIN_NO(137) | 5)
-
-#define MT8135_PIN_138_DPIG2__FUNC_GPIO138 (MTK_PIN_NO(138) | 0)
-#define MT8135_PIN_138_DPIG2__FUNC_DPI0_G2 (MTK_PIN_NO(138) | 1)
-#define MT8135_PIN_138_DPIG2__FUNC_EINT112 (MTK_PIN_NO(138) | 2)
-#define MT8135_PIN_138_DPIG2__FUNC_DSP1_IMS (MTK_PIN_NO(138) | 5)
-
-#define MT8135_PIN_139_DPIG3__FUNC_GPIO139 (MTK_PIN_NO(139) | 0)
-#define MT8135_PIN_139_DPIG3__FUNC_DPI0_G3 (MTK_PIN_NO(139) | 1)
-#define MT8135_PIN_139_DPIG3__FUNC_EINT113 (MTK_PIN_NO(139) | 2)
-#define MT8135_PIN_139_DPIG3__FUNC_DSP2_IMS (MTK_PIN_NO(139) | 5)
-
-#define MT8135_PIN_140_DPIG6__FUNC_GPIO140 (MTK_PIN_NO(140) | 0)
-#define MT8135_PIN_140_DPIG6__FUNC_DPI0_G6 (MTK_PIN_NO(140) | 1)
-#define MT8135_PIN_140_DPIG6__FUNC_EINT116 (MTK_PIN_NO(140) | 2)
-#define MT8135_PIN_140_DPIG6__FUNC_CM2DAT_2X_2 (MTK_PIN_NO(140) | 4)
-
-#define MT8135_PIN_141_DPIG7__FUNC_GPIO141 (MTK_PIN_NO(141) | 0)
-#define MT8135_PIN_141_DPIG7__FUNC_DPI0_G7 (MTK_PIN_NO(141) | 1)
-#define MT8135_PIN_141_DPIG7__FUNC_EINT117 (MTK_PIN_NO(141) | 2)
-#define MT8135_PIN_141_DPIG7__FUNC_CM2DAT_2X_3 (MTK_PIN_NO(141) | 4)
-
-#define MT8135_PIN_142_DPIR0__FUNC_GPIO142 (MTK_PIN_NO(142) | 0)
-#define MT8135_PIN_142_DPIR0__FUNC_DPI0_R0 (MTK_PIN_NO(142) | 1)
-#define MT8135_PIN_142_DPIR0__FUNC_EINT118 (MTK_PIN_NO(142) | 2)
-#define MT8135_PIN_142_DPIR0__FUNC_CM2DAT_2X_4 (MTK_PIN_NO(142) | 4)
-
-#define MT8135_PIN_143_DPIR1__FUNC_GPIO143 (MTK_PIN_NO(143) | 0)
-#define MT8135_PIN_143_DPIR1__FUNC_DPI0_R1 (MTK_PIN_NO(143) | 1)
-#define MT8135_PIN_143_DPIR1__FUNC_EINT119 (MTK_PIN_NO(143) | 2)
-#define MT8135_PIN_143_DPIR1__FUNC_CM2DAT_2X_5 (MTK_PIN_NO(143) | 4)
-
-#define MT8135_PIN_144_DPIR2__FUNC_GPIO144 (MTK_PIN_NO(144) | 0)
-#define MT8135_PIN_144_DPIR2__FUNC_DPI0_R2 (MTK_PIN_NO(144) | 1)
-#define MT8135_PIN_144_DPIR2__FUNC_EINT120 (MTK_PIN_NO(144) | 2)
-#define MT8135_PIN_144_DPIR2__FUNC_CM2DAT_2X_6 (MTK_PIN_NO(144) | 4)
-
-#define MT8135_PIN_145_DPIR4__FUNC_GPIO145 (MTK_PIN_NO(145) | 0)
-#define MT8135_PIN_145_DPIR4__FUNC_DPI0_R4 (MTK_PIN_NO(145) | 1)
-#define MT8135_PIN_145_DPIR4__FUNC_EINT122 (MTK_PIN_NO(145) | 2)
-#define MT8135_PIN_145_DPIR4__FUNC_CM2DAT_2X_8 (MTK_PIN_NO(145) | 4)
-
-#define MT8135_PIN_146_DPIR5__FUNC_GPIO146 (MTK_PIN_NO(146) | 0)
-#define MT8135_PIN_146_DPIR5__FUNC_DPI0_R5 (MTK_PIN_NO(146) | 1)
-#define MT8135_PIN_146_DPIR5__FUNC_EINT123 (MTK_PIN_NO(146) | 2)
-#define MT8135_PIN_146_DPIR5__FUNC_CM2DAT_2X_9 (MTK_PIN_NO(146) | 4)
-
-#define MT8135_PIN_147_DPIR6__FUNC_GPIO147 (MTK_PIN_NO(147) | 0)
-#define MT8135_PIN_147_DPIR6__FUNC_DPI0_R6 (MTK_PIN_NO(147) | 1)
-#define MT8135_PIN_147_DPIR6__FUNC_EINT124 (MTK_PIN_NO(147) | 2)
-#define MT8135_PIN_147_DPIR6__FUNC_CM2VSYNC_2X (MTK_PIN_NO(147) | 4)
-
-#define MT8135_PIN_148_DPIR7__FUNC_GPIO148 (MTK_PIN_NO(148) | 0)
-#define MT8135_PIN_148_DPIR7__FUNC_DPI0_R7 (MTK_PIN_NO(148) | 1)
-#define MT8135_PIN_148_DPIR7__FUNC_EINT125 (MTK_PIN_NO(148) | 2)
-#define MT8135_PIN_148_DPIR7__FUNC_CM2HSYNC_2X (MTK_PIN_NO(148) | 4)
-
-#define MT8135_PIN_149_TDN3__FUNC_GPIO149 (MTK_PIN_NO(149) | 0)
-#define MT8135_PIN_149_TDN3__FUNC_EINT36 (MTK_PIN_NO(149) | 2)
-
-#define MT8135_PIN_150_TDP3__FUNC_GPIO150 (MTK_PIN_NO(150) | 0)
-#define MT8135_PIN_150_TDP3__FUNC_EINT35 (MTK_PIN_NO(150) | 2)
-
-#define MT8135_PIN_151_TDN2__FUNC_GPIO151 (MTK_PIN_NO(151) | 0)
-#define MT8135_PIN_151_TDN2__FUNC_EINT169 (MTK_PIN_NO(151) | 2)
-
-#define MT8135_PIN_152_TDP2__FUNC_GPIO152 (MTK_PIN_NO(152) | 0)
-#define MT8135_PIN_152_TDP2__FUNC_EINT168 (MTK_PIN_NO(152) | 2)
-
-#define MT8135_PIN_153_TCN__FUNC_GPIO153 (MTK_PIN_NO(153) | 0)
-#define MT8135_PIN_153_TCN__FUNC_EINT163 (MTK_PIN_NO(153) | 2)
-
-#define MT8135_PIN_154_TCP__FUNC_GPIO154 (MTK_PIN_NO(154) | 0)
-#define MT8135_PIN_154_TCP__FUNC_EINT162 (MTK_PIN_NO(154) | 2)
-
-#define MT8135_PIN_155_TDN1__FUNC_GPIO155 (MTK_PIN_NO(155) | 0)
-#define MT8135_PIN_155_TDN1__FUNC_EINT167 (MTK_PIN_NO(155) | 2)
-
-#define MT8135_PIN_156_TDP1__FUNC_GPIO156 (MTK_PIN_NO(156) | 0)
-#define MT8135_PIN_156_TDP1__FUNC_EINT166 (MTK_PIN_NO(156) | 2)
-
-#define MT8135_PIN_157_TDN0__FUNC_GPIO157 (MTK_PIN_NO(157) | 0)
-#define MT8135_PIN_157_TDN0__FUNC_EINT165 (MTK_PIN_NO(157) | 2)
-
-#define MT8135_PIN_158_TDP0__FUNC_GPIO158 (MTK_PIN_NO(158) | 0)
-#define MT8135_PIN_158_TDP0__FUNC_EINT164 (MTK_PIN_NO(158) | 2)
-
-#define MT8135_PIN_159_RDN3__FUNC_GPIO159 (MTK_PIN_NO(159) | 0)
-#define MT8135_PIN_159_RDN3__FUNC_EINT18 (MTK_PIN_NO(159) | 2)
-
-#define MT8135_PIN_160_RDP3__FUNC_GPIO160 (MTK_PIN_NO(160) | 0)
-#define MT8135_PIN_160_RDP3__FUNC_EINT30 (MTK_PIN_NO(160) | 2)
-
-#define MT8135_PIN_161_RDN2__FUNC_GPIO161 (MTK_PIN_NO(161) | 0)
-#define MT8135_PIN_161_RDN2__FUNC_EINT31 (MTK_PIN_NO(161) | 2)
-
-#define MT8135_PIN_162_RDP2__FUNC_GPIO162 (MTK_PIN_NO(162) | 0)
-#define MT8135_PIN_162_RDP2__FUNC_EINT32 (MTK_PIN_NO(162) | 2)
-
-#define MT8135_PIN_163_RCN__FUNC_GPIO163 (MTK_PIN_NO(163) | 0)
-#define MT8135_PIN_163_RCN__FUNC_EINT33 (MTK_PIN_NO(163) | 2)
-
-#define MT8135_PIN_164_RCP__FUNC_GPIO164 (MTK_PIN_NO(164) | 0)
-#define MT8135_PIN_164_RCP__FUNC_EINT39 (MTK_PIN_NO(164) | 2)
-
-#define MT8135_PIN_165_RDN1__FUNC_GPIO165 (MTK_PIN_NO(165) | 0)
-
-#define MT8135_PIN_166_RDP1__FUNC_GPIO166 (MTK_PIN_NO(166) | 0)
-
-#define MT8135_PIN_167_RDN0__FUNC_GPIO167 (MTK_PIN_NO(167) | 0)
-
-#define MT8135_PIN_168_RDP0__FUNC_GPIO168 (MTK_PIN_NO(168) | 0)
-
-#define MT8135_PIN_169_RDN1_A__FUNC_GPIO169 (MTK_PIN_NO(169) | 0)
-#define MT8135_PIN_169_RDN1_A__FUNC_CMDAT6 (MTK_PIN_NO(169) | 1)
-#define MT8135_PIN_169_RDN1_A__FUNC_EINT175 (MTK_PIN_NO(169) | 2)
-
-#define MT8135_PIN_170_RDP1_A__FUNC_GPIO170 (MTK_PIN_NO(170) | 0)
-#define MT8135_PIN_170_RDP1_A__FUNC_CMDAT7 (MTK_PIN_NO(170) | 1)
-#define MT8135_PIN_170_RDP1_A__FUNC_EINT174 (MTK_PIN_NO(170) | 2)
-
-#define MT8135_PIN_171_RCN_A__FUNC_GPIO171 (MTK_PIN_NO(171) | 0)
-#define MT8135_PIN_171_RCN_A__FUNC_CMDAT8 (MTK_PIN_NO(171) | 1)
-#define MT8135_PIN_171_RCN_A__FUNC_EINT171 (MTK_PIN_NO(171) | 2)
-
-#define MT8135_PIN_172_RCP_A__FUNC_GPIO172 (MTK_PIN_NO(172) | 0)
-#define MT8135_PIN_172_RCP_A__FUNC_CMDAT9 (MTK_PIN_NO(172) | 1)
-#define MT8135_PIN_172_RCP_A__FUNC_EINT170 (MTK_PIN_NO(172) | 2)
-
-#define MT8135_PIN_173_RDN0_A__FUNC_GPIO173 (MTK_PIN_NO(173) | 0)
-#define MT8135_PIN_173_RDN0_A__FUNC_CMHSYNC (MTK_PIN_NO(173) | 1)
-#define MT8135_PIN_173_RDN0_A__FUNC_EINT173 (MTK_PIN_NO(173) | 2)
-
-#define MT8135_PIN_174_RDP0_A__FUNC_GPIO174 (MTK_PIN_NO(174) | 0)
-#define MT8135_PIN_174_RDP0_A__FUNC_CMVSYNC (MTK_PIN_NO(174) | 1)
-#define MT8135_PIN_174_RDP0_A__FUNC_EINT172 (MTK_PIN_NO(174) | 2)
-
-#define MT8135_PIN_175_RDN1_B__FUNC_GPIO175 (MTK_PIN_NO(175) | 0)
-#define MT8135_PIN_175_RDN1_B__FUNC_CMDAT2 (MTK_PIN_NO(175) | 1)
-#define MT8135_PIN_175_RDN1_B__FUNC_EINT181 (MTK_PIN_NO(175) | 2)
-#define MT8135_PIN_175_RDN1_B__FUNC_CMCSD2 (MTK_PIN_NO(175) | 3)
-
-#define MT8135_PIN_176_RDP1_B__FUNC_GPIO176 (MTK_PIN_NO(176) | 0)
-#define MT8135_PIN_176_RDP1_B__FUNC_CMDAT3 (MTK_PIN_NO(176) | 1)
-#define MT8135_PIN_176_RDP1_B__FUNC_EINT180 (MTK_PIN_NO(176) | 2)
-#define MT8135_PIN_176_RDP1_B__FUNC_CMCSD3 (MTK_PIN_NO(176) | 3)
-
-#define MT8135_PIN_177_RCN_B__FUNC_GPIO177 (MTK_PIN_NO(177) | 0)
-#define MT8135_PIN_177_RCN_B__FUNC_CMDAT4 (MTK_PIN_NO(177) | 1)
-#define MT8135_PIN_177_RCN_B__FUNC_EINT177 (MTK_PIN_NO(177) | 2)
-
-#define MT8135_PIN_178_RCP_B__FUNC_GPIO178 (MTK_PIN_NO(178) | 0)
-#define MT8135_PIN_178_RCP_B__FUNC_CMDAT5 (MTK_PIN_NO(178) | 1)
-#define MT8135_PIN_178_RCP_B__FUNC_EINT176 (MTK_PIN_NO(178) | 2)
-
-#define MT8135_PIN_179_RDN0_B__FUNC_GPIO179 (MTK_PIN_NO(179) | 0)
-#define MT8135_PIN_179_RDN0_B__FUNC_CMDAT0 (MTK_PIN_NO(179) | 1)
-#define MT8135_PIN_179_RDN0_B__FUNC_EINT179 (MTK_PIN_NO(179) | 2)
-#define MT8135_PIN_179_RDN0_B__FUNC_CMCSD0 (MTK_PIN_NO(179) | 3)
-
-#define MT8135_PIN_180_RDP0_B__FUNC_GPIO180 (MTK_PIN_NO(180) | 0)
-#define MT8135_PIN_180_RDP0_B__FUNC_CMDAT1 (MTK_PIN_NO(180) | 1)
-#define MT8135_PIN_180_RDP0_B__FUNC_EINT178 (MTK_PIN_NO(180) | 2)
-#define MT8135_PIN_180_RDP0_B__FUNC_CMCSD1 (MTK_PIN_NO(180) | 3)
-
-#define MT8135_PIN_181_CMPCLK__FUNC_GPIO181 (MTK_PIN_NO(181) | 0)
-#define MT8135_PIN_181_CMPCLK__FUNC_CMPCLK (MTK_PIN_NO(181) | 1)
-#define MT8135_PIN_181_CMPCLK__FUNC_EINT182 (MTK_PIN_NO(181) | 2)
-#define MT8135_PIN_181_CMPCLK__FUNC_CMCSK (MTK_PIN_NO(181) | 3)
-#define MT8135_PIN_181_CMPCLK__FUNC_CM2MCLK_4X (MTK_PIN_NO(181) | 4)
-#define MT8135_PIN_181_CMPCLK__FUNC_TS_AUXADC_SEL_3 (MTK_PIN_NO(181) | 5)
-#define MT8135_PIN_181_CMPCLK__FUNC_VENC_TEST_CK (MTK_PIN_NO(181) | 6)
-#define MT8135_PIN_181_CMPCLK__FUNC_TESTA_OUT27 (MTK_PIN_NO(181) | 7)
-
-#define MT8135_PIN_182_CMMCLK__FUNC_GPIO182 (MTK_PIN_NO(182) | 0)
-#define MT8135_PIN_182_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(182) | 1)
-#define MT8135_PIN_182_CMMCLK__FUNC_EINT183 (MTK_PIN_NO(182) | 2)
-#define MT8135_PIN_182_CMMCLK__FUNC_TS_AUXADC_SEL_2 (MTK_PIN_NO(182) | 5)
-#define MT8135_PIN_182_CMMCLK__FUNC_TESTA_OUT28 (MTK_PIN_NO(182) | 7)
-
-#define MT8135_PIN_183_CMRST__FUNC_GPIO183 (MTK_PIN_NO(183) | 0)
-#define MT8135_PIN_183_CMRST__FUNC_CMRST (MTK_PIN_NO(183) | 1)
-#define MT8135_PIN_183_CMRST__FUNC_EINT185 (MTK_PIN_NO(183) | 2)
-#define MT8135_PIN_183_CMRST__FUNC_TS_AUXADC_SEL_1 (MTK_PIN_NO(183) | 5)
-#define MT8135_PIN_183_CMRST__FUNC_TESTA_OUT30 (MTK_PIN_NO(183) | 7)
-
-#define MT8135_PIN_184_CMPDN__FUNC_GPIO184 (MTK_PIN_NO(184) | 0)
-#define MT8135_PIN_184_CMPDN__FUNC_CMPDN (MTK_PIN_NO(184) | 1)
-#define MT8135_PIN_184_CMPDN__FUNC_EINT184 (MTK_PIN_NO(184) | 2)
-#define MT8135_PIN_184_CMPDN__FUNC_TS_AUXADC_SEL_0 (MTK_PIN_NO(184) | 5)
-#define MT8135_PIN_184_CMPDN__FUNC_TESTA_OUT29 (MTK_PIN_NO(184) | 7)
-
-#define MT8135_PIN_185_CMFLASH__FUNC_GPIO185 (MTK_PIN_NO(185) | 0)
-#define MT8135_PIN_185_CMFLASH__FUNC_CMFLASH (MTK_PIN_NO(185) | 1)
-#define MT8135_PIN_185_CMFLASH__FUNC_EINT186 (MTK_PIN_NO(185) | 2)
-#define MT8135_PIN_185_CMFLASH__FUNC_CM2MCLK_3X (MTK_PIN_NO(185) | 3)
-#define MT8135_PIN_185_CMFLASH__FUNC_MFG_TEST_CK_1 (MTK_PIN_NO(185) | 6)
-#define MT8135_PIN_185_CMFLASH__FUNC_TESTA_OUT31 (MTK_PIN_NO(185) | 7)
-
-#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_GPIO186 (MTK_PIN_NO(186) | 0)
-#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_MRG_I2S_P_CLK (MTK_PIN_NO(186) | 1)
-#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_EINT14 (MTK_PIN_NO(186) | 2)
-#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_I2SIN_CK (MTK_PIN_NO(186) | 3)
-#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_PCM0_CK (MTK_PIN_NO(186) | 4)
-#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_DSP2_ICK (MTK_PIN_NO(186) | 5)
-#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_IMG_TEST_CK (MTK_PIN_NO(186) | 6)
-#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_USB_SCL (MTK_PIN_NO(186) | 7)
-
-#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_GPIO187 (MTK_PIN_NO(187) | 0)
-#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_MRG_I2S_SYNC (MTK_PIN_NO(187) | 1)
-#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_EINT16 (MTK_PIN_NO(187) | 2)
-#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_I2SIN_WS (MTK_PIN_NO(187) | 3)
-#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_PCM0_WS (MTK_PIN_NO(187) | 4)
-#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_DISP_TEST_CK (MTK_PIN_NO(187) | 6)
-
-#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_GPIO188 (MTK_PIN_NO(188) | 0)
-#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_MRG_I2S_PCM_RX (MTK_PIN_NO(188) | 1)
-#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_EINT15 (MTK_PIN_NO(188) | 2)
-#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_I2SIN_DAT (MTK_PIN_NO(188) | 3)
-#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_PCM0_DI (MTK_PIN_NO(188) | 4)
-#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_DSP2_ID (MTK_PIN_NO(188) | 5)
-#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_MFG_TEST_CK (MTK_PIN_NO(188) | 6)
-#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_USB_SDA (MTK_PIN_NO(188) | 7)
-
-#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_GPIO189 (MTK_PIN_NO(189) | 0)
-#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_MRG_I2S_PCM_TX (MTK_PIN_NO(189) | 1)
-#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_EINT17 (MTK_PIN_NO(189) | 2)
-#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_I2SOUT_DAT (MTK_PIN_NO(189) | 3)
-#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_PCM0_DO (MTK_PIN_NO(189) | 4)
-#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_VDEC_TEST_CK (MTK_PIN_NO(189) | 6)
-
-#define MT8135_PIN_190_SRCLKENAI__FUNC_GPIO190 (MTK_PIN_NO(190) | 0)
-#define MT8135_PIN_190_SRCLKENAI__FUNC_SRCLKENAI (MTK_PIN_NO(190) | 1)
-
-#define MT8135_PIN_191_URXD3__FUNC_GPIO191 (MTK_PIN_NO(191) | 0)
-#define MT8135_PIN_191_URXD3__FUNC_URXD3 (MTK_PIN_NO(191) | 1)
-#define MT8135_PIN_191_URXD3__FUNC_EINT87 (MTK_PIN_NO(191) | 2)
-#define MT8135_PIN_191_URXD3__FUNC_UTXD3 (MTK_PIN_NO(191) | 3)
-#define MT8135_PIN_191_URXD3__FUNC_TS_AUX_ST (MTK_PIN_NO(191) | 5)
-#define MT8135_PIN_191_URXD3__FUNC_PWM4 (MTK_PIN_NO(191) | 6)
-
-#define MT8135_PIN_192_UTXD3__FUNC_GPIO192 (MTK_PIN_NO(192) | 0)
-#define MT8135_PIN_192_UTXD3__FUNC_UTXD3 (MTK_PIN_NO(192) | 1)
-#define MT8135_PIN_192_UTXD3__FUNC_EINT86 (MTK_PIN_NO(192) | 2)
-#define MT8135_PIN_192_UTXD3__FUNC_URXD3 (MTK_PIN_NO(192) | 3)
-#define MT8135_PIN_192_UTXD3__FUNC_TS_AUX_CS_B (MTK_PIN_NO(192) | 5)
-#define MT8135_PIN_192_UTXD3__FUNC_PWM3 (MTK_PIN_NO(192) | 6)
-
-#define MT8135_PIN_193_SDA2__FUNC_GPIO193 (MTK_PIN_NO(193) | 0)
-#define MT8135_PIN_193_SDA2__FUNC_SDA2 (MTK_PIN_NO(193) | 1)
-#define MT8135_PIN_193_SDA2__FUNC_EINT95 (MTK_PIN_NO(193) | 2)
-#define MT8135_PIN_193_SDA2__FUNC_CLKM5 (MTK_PIN_NO(193) | 3)
-#define MT8135_PIN_193_SDA2__FUNC_PWM5 (MTK_PIN_NO(193) | 4)
-#define MT8135_PIN_193_SDA2__FUNC_TS_AUX_PWDB (MTK_PIN_NO(193) | 5)
-
-#define MT8135_PIN_194_SCL2__FUNC_GPIO194 (MTK_PIN_NO(194) | 0)
-#define MT8135_PIN_194_SCL2__FUNC_SCL2 (MTK_PIN_NO(194) | 1)
-#define MT8135_PIN_194_SCL2__FUNC_EINT94 (MTK_PIN_NO(194) | 2)
-#define MT8135_PIN_194_SCL2__FUNC_CLKM4 (MTK_PIN_NO(194) | 3)
-#define MT8135_PIN_194_SCL2__FUNC_PWM4 (MTK_PIN_NO(194) | 4)
-#define MT8135_PIN_194_SCL2__FUNC_TS_AUXADC_TEST_CK (MTK_PIN_NO(194) | 5)
-
-#define MT8135_PIN_195_SDA1__FUNC_GPIO195 (MTK_PIN_NO(195) | 0)
-#define MT8135_PIN_195_SDA1__FUNC_SDA1 (MTK_PIN_NO(195) | 1)
-#define MT8135_PIN_195_SDA1__FUNC_EINT93 (MTK_PIN_NO(195) | 2)
-#define MT8135_PIN_195_SDA1__FUNC_CLKM3 (MTK_PIN_NO(195) | 3)
-#define MT8135_PIN_195_SDA1__FUNC_PWM3 (MTK_PIN_NO(195) | 4)
-#define MT8135_PIN_195_SDA1__FUNC_TS_AUX_SCLK_PWDB (MTK_PIN_NO(195) | 5)
-
-#define MT8135_PIN_196_SCL1__FUNC_GPIO196 (MTK_PIN_NO(196) | 0)
-#define MT8135_PIN_196_SCL1__FUNC_SCL1 (MTK_PIN_NO(196) | 1)
-#define MT8135_PIN_196_SCL1__FUNC_EINT92 (MTK_PIN_NO(196) | 2)
-#define MT8135_PIN_196_SCL1__FUNC_CLKM2 (MTK_PIN_NO(196) | 3)
-#define MT8135_PIN_196_SCL1__FUNC_PWM2 (MTK_PIN_NO(196) | 4)
-#define MT8135_PIN_196_SCL1__FUNC_TS_AUX_DIN (MTK_PIN_NO(196) | 5)
-
-#define MT8135_PIN_197_MSDC3_DAT2__FUNC_GPIO197 (MTK_PIN_NO(197) | 0)
-#define MT8135_PIN_197_MSDC3_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(197) | 1)
-#define MT8135_PIN_197_MSDC3_DAT2__FUNC_EINT71 (MTK_PIN_NO(197) | 2)
-#define MT8135_PIN_197_MSDC3_DAT2__FUNC_SCL6 (MTK_PIN_NO(197) | 3)
-#define MT8135_PIN_197_MSDC3_DAT2__FUNC_PWM5 (MTK_PIN_NO(197) | 4)
-#define MT8135_PIN_197_MSDC3_DAT2__FUNC_CLKM4 (MTK_PIN_NO(197) | 5)
-#define MT8135_PIN_197_MSDC3_DAT2__FUNC_MFG_TEST_CK_2 (MTK_PIN_NO(197) | 6)
-
-#define MT8135_PIN_198_MSDC3_DAT3__FUNC_GPIO198 (MTK_PIN_NO(198) | 0)
-#define MT8135_PIN_198_MSDC3_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(198) | 1)
-#define MT8135_PIN_198_MSDC3_DAT3__FUNC_EINT72 (MTK_PIN_NO(198) | 2)
-#define MT8135_PIN_198_MSDC3_DAT3__FUNC_SDA6 (MTK_PIN_NO(198) | 3)
-#define MT8135_PIN_198_MSDC3_DAT3__FUNC_PWM6 (MTK_PIN_NO(198) | 4)
-#define MT8135_PIN_198_MSDC3_DAT3__FUNC_CLKM5 (MTK_PIN_NO(198) | 5)
-#define MT8135_PIN_198_MSDC3_DAT3__FUNC_MFG_TEST_CK_3 (MTK_PIN_NO(198) | 6)
-
-#define MT8135_PIN_199_MSDC3_CMD__FUNC_GPIO199 (MTK_PIN_NO(199) | 0)
-#define MT8135_PIN_199_MSDC3_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(199) | 1)
-#define MT8135_PIN_199_MSDC3_CMD__FUNC_EINT68 (MTK_PIN_NO(199) | 2)
-#define MT8135_PIN_199_MSDC3_CMD__FUNC_SDA2 (MTK_PIN_NO(199) | 3)
-#define MT8135_PIN_199_MSDC3_CMD__FUNC_PWM2 (MTK_PIN_NO(199) | 4)
-#define MT8135_PIN_199_MSDC3_CMD__FUNC_CLKM1 (MTK_PIN_NO(199) | 5)
-#define MT8135_PIN_199_MSDC3_CMD__FUNC_MFG_TEST_CK_4 (MTK_PIN_NO(199) | 6)
-
-#define MT8135_PIN_200_MSDC3_CLK__FUNC_GPIO200 (MTK_PIN_NO(200) | 0)
-#define MT8135_PIN_200_MSDC3_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(200) | 1)
-#define MT8135_PIN_200_MSDC3_CLK__FUNC_EINT67 (MTK_PIN_NO(200) | 2)
-#define MT8135_PIN_200_MSDC3_CLK__FUNC_SCL2 (MTK_PIN_NO(200) | 3)
-#define MT8135_PIN_200_MSDC3_CLK__FUNC_PWM1 (MTK_PIN_NO(200) | 4)
-#define MT8135_PIN_200_MSDC3_CLK__FUNC_CLKM0 (MTK_PIN_NO(200) | 5)
-
-#define MT8135_PIN_201_MSDC3_DAT1__FUNC_GPIO201 (MTK_PIN_NO(201) | 0)
-#define MT8135_PIN_201_MSDC3_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(201) | 1)
-#define MT8135_PIN_201_MSDC3_DAT1__FUNC_EINT70 (MTK_PIN_NO(201) | 2)
-#define MT8135_PIN_201_MSDC3_DAT1__FUNC_SDA3 (MTK_PIN_NO(201) | 3)
-#define MT8135_PIN_201_MSDC3_DAT1__FUNC_PWM4 (MTK_PIN_NO(201) | 4)
-#define MT8135_PIN_201_MSDC3_DAT1__FUNC_CLKM3 (MTK_PIN_NO(201) | 5)
-
-#define MT8135_PIN_202_MSDC3_DAT0__FUNC_GPIO202 (MTK_PIN_NO(202) | 0)
-#define MT8135_PIN_202_MSDC3_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(202) | 1)
-#define MT8135_PIN_202_MSDC3_DAT0__FUNC_EINT69 (MTK_PIN_NO(202) | 2)
-#define MT8135_PIN_202_MSDC3_DAT0__FUNC_SCL3 (MTK_PIN_NO(202) | 3)
-#define MT8135_PIN_202_MSDC3_DAT0__FUNC_PWM3 (MTK_PIN_NO(202) | 4)
-#define MT8135_PIN_202_MSDC3_DAT0__FUNC_CLKM2 (MTK_PIN_NO(202) | 5)
-
-#endif /* __DTS_MT8135_PINFUNC_H */
diff --git a/arch/arm/boot/dts/mxs-pinfunc.h b/arch/arm/boot/dts/mxs-pinfunc.h
deleted file mode 100644
index c6da987b20cb..000000000000
--- a/arch/arm/boot/dts/mxs-pinfunc.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Header providing constants for i.MX28 pinctrl bindings.
- *
- * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __DT_BINDINGS_MXS_PINCTRL_H__
-#define __DT_BINDINGS_MXS_PINCTRL_H__
-
-/* fsl,drive-strength property */
-#define MXS_DRIVE_4mA		0
-#define MXS_DRIVE_8mA		1
-#define MXS_DRIVE_12mA		2
-#define MXS_DRIVE_16mA		3
-
-/* fsl,voltage property */
-#define MXS_VOLTAGE_LOW		0
-#define MXS_VOLTAGE_HIGH	1
-
-/* fsl,pull-up property */
-#define MXS_PULL_DISABLE	0
-#define MXS_PULL_ENABLE		1
-
-#endif /* __DT_BINDINGS_MXS_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/nspire-classic.dtsi b/arch/arm/boot/dts/nspire-classic.dtsi
deleted file mode 100644
index 4907c5085d4b..000000000000
--- a/arch/arm/boot/dts/nspire-classic.dtsi
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- *  linux/arch/arm/boot/nspire-classic.dts
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-
-/include/ "nspire.dtsi"
-
-&lcd {
-	lcd-type = "classic";
-};
-
-&fast_timer {
-	/* compatible = "lsi,zevio-timer"; */
-	reg = <0x90010000 0x1000>, <0x900A0010 0x8>;
-};
-
-&uart {
-	compatible = "ns16550";
-	reg-shift = <2>;
-	reg-io-width = <4>;
-	clocks = <&apb_pclk>;
-	no-loopback-test;
-};
-
-&timer0 {
-	/* compatible = "lsi,zevio-timer"; */
-	reg = <0x900C0000 0x1000>, <0x900A0018 0x8>;
-};
-
-&timer1 {
-	compatible = "lsi,zevio-timer";
-	reg = <0x900D0000 0x1000>, <0x900A0020 0x8>;
-};
-
-&keypad {
-	active-low;
-
-};
-
-&base_clk {
-	compatible = "lsi,nspire-classic-clock";
-};
-
-&ahb_clk {
-	compatible = "lsi,nspire-classic-ahb-divider";
-};
-
-
-&vbus_reg {
-	gpio = <&gpio 5 0>;
-};
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x10000000 0x2000000>; /* 32 MB */
-	};
-
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		intc: interrupt-controller@DC000000 {
-			compatible = "lsi,zevio-intc";
-			interrupt-controller;
-			reg = <0xDC000000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-	};
-	chosen {
-		bootargs = "debug earlyprintk console=tty0 console=ttyS0,115200n8 root=/dev/ram0";
-	};
-};
diff --git a/arch/arm/boot/dts/nspire-clp.dts b/arch/arm/boot/dts/nspire-clp.dts
deleted file mode 100644
index fa5a044656de..000000000000
--- a/arch/arm/boot/dts/nspire-clp.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- *  linux/arch/arm/boot/nspire-clp.dts
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-/dts-v1/;
-
-/include/ "nspire-classic.dtsi"
-
-&keypad {
-	linux,keymap = <
-	0x0000001c 	0x0001001c 	0x00020039
-	0x0004002c 	0x00050034 	0x00060015
-	0x0007000b 	0x0008002d 	0x01000033
-	0x0101004e 	0x01020011 	0x01030004
-	0x0104002f 	0x01050003 	0x01060016
-	0x01070002 	0x01080014 	0x02000062
-	0x0201000c 	0x0202001f 	0x02030007
-	0x02040013 	0x02050006 	0x02060010
-	0x02070005 	0x02080019 	0x03000027
-	0x03010037 	0x03020018 	0x0303000a
-	0x03040031 	0x03050009 	0x03060032
-	0x03070008 	0x03080026 	0x04000028
-	0x04010035 	0x04020025 	0x04040024
-	0x04060017 	0x04080023 	0x05000028
-	0x05020022 	0x0503001b 	0x05040021
-	0x0505001a 	0x05060012 	0x0507006f
-	0x05080020 	0x0509002a 	0x0601001c
-	0x0602002e 	0x06030068 	0x06040030
-	0x0605006d 	0x0606001e 	0x06070001
-	0x0608002b 	0x0609000f 	0x07000067
-	0x0702006a 	0x0704006c 	0x07060069
-	0x0707000e 	0x0708001d 	0x070a000d
-	>;
-};
-
-/ {
-	model = "TI-NSPIRE Clickpad";
-	compatible = "ti,nspire-clp";
-};
diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts
deleted file mode 100644
index 08e0b81b3385..000000000000
--- a/arch/arm/boot/dts/nspire-cx.dts
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- *  linux/arch/arm/boot/nspire-cx.dts
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-/dts-v1/;
-
-/include/ "nspire.dtsi"
-
-&lcd {
-	lcd-type = "cx";
-};
-
-&fast_timer {
-	/* compatible = "arm,sp804", "arm,primecell"; */
-};
-
-&uart {
-	compatible = "arm,pl011", "arm,primecell";
-
-	clocks = <&uart_clk>, <&apb_pclk>;
-	clock-names = "uart_clk", "apb_pclk";
-};
-
-&timer0 {
-	compatible = "arm,sp804", "arm,primecell";
-};
-
-&timer1 {
-	compatible = "arm,sp804", "arm,primecell";
-};
-
-&base_clk {
-	compatible = "lsi,nspire-cx-clock";
-};
-
-&ahb_clk {
-	compatible = "lsi,nspire-cx-ahb-divider";
-};
-
-&keypad {
-	linux,keymap = <
-	0x0000001c 	0x0001001c 	0x00040039
-	0x0005002c 	0x00060015 	0x0007000b
-	0x0008000f 	0x0100002d 	0x01010011
-	0x0102002f 	0x01030004 	0x01040016
-	0x01050014 	0x0106001f 	0x01070002
-	0x010a006a 	0x02000013 	0x02010010
-	0x02020019 	0x02030007 	0x02040018
-	0x02050031 	0x02060032 	0x02070005
-	0x02080028 	0x0209006c 	0x03000026
-	0x03010025 	0x03020024 	0x0303000a
-	0x03040017 	0x03050023 	0x03060022
-	0x03070008 	0x03080035 	0x03090069
-	0x04000021 	0x04010012 	0x04020020
-	0x0404002e 	0x04050030 	0x0406001e
-	0x0407000d 	0x04080037 	0x04090067
-	0x05010038 	0x0502000c 	0x0503001b
-	0x05040034 	0x0505001a 	0x05060006
-	0x05080027 	0x0509000e 	0x050a006f
-	0x0600002b 	0x0602004e 	0x06030068
-	0x06040003 	0x0605006d 	0x06060009
-	0x06070001 	0x0609000f 	0x0708002a
-	0x0709001d 	0x070a0033 	>;
-};
-
-&vbus_reg {
-	gpio = <&gpio 2 0>;
-};
-
-/ {
-	model = "TI-NSPIRE CX";
-	compatible = "ti,nspire-cx";
-
-	memory {
-		device_type = "memory";
-		reg = <0x10000000 0x4000000>; /* 64 MB */
-	};
-
-	uart_clk: uart_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		intc: interrupt-controller@DC000000 {
-			compatible = "arm,pl190-vic";
-			interrupt-controller;
-			reg = <0xDC000000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		apb@90000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			i2c@90050000 {
-				compatible = "snps,designware-i2c";
-				reg = <0x90050000 0x1000>;
-				interrupts = <20>;
-			};
-		};
-	};
-	chosen {
-		bootargs = "debug earlyprintk console=tty0 console=ttyAMA0,115200n8 root=/dev/ram0";
-	};
-};
diff --git a/arch/arm/boot/dts/nspire-tp.dts b/arch/arm/boot/dts/nspire-tp.dts
deleted file mode 100644
index 621391ce6ed6..000000000000
--- a/arch/arm/boot/dts/nspire-tp.dts
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- *  linux/arch/arm/boot/nspire-tp.dts
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-/dts-v1/;
-
-/include/ "nspire-classic.dtsi"
-
-&keypad {
-	linux,keymap = <
-	0x0000001c 	0x0001001c 	0x00040039
-	0x0005002c 	0x00060015 	0x0007000b
-	0x0008000f 	0x0100002d 	0x01010011
-	0x0102002f 	0x01030004 	0x01040016
-	0x01050014 	0x0106001f 	0x01070002
-	0x010a006a 	0x02000013 	0x02010010
-	0x02020019 	0x02030007 	0x02040018
-	0x02050031 	0x02060032 	0x02070005
-	0x02080028 	0x0209006c 	0x03000026
-	0x03010025 	0x03020024 	0x0303000a
-	0x03040017 	0x03050023 	0x03060022
-	0x03070008 	0x03080035 	0x03090069
-	0x04000021 	0x04010012 	0x04020020
-	0x0404002e 	0x04050030 	0x0406001e
-	0x0407000d 	0x04080037 	0x04090067
-	0x05010038 	0x0502000c 	0x0503001b
-	0x05040034 	0x0505001a 	0x05060006
-	0x05080027 	0x0509000e 	0x050a006f
-	0x0600002b 	0x0602004e 	0x06030068
-	0x06040003 	0x0605006d 	0x06060009
-	0x06070001 	0x0609000f 	0x0708002a
-	0x0709001d 	0x070a0033 	>;
-};
-
-/ {
-	model = "TI-NSPIRE Touchpad";
-	compatible = "ti,nspire-tp";
-};
diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi
deleted file mode 100644
index ee5a0bb22354..000000000000
--- a/arch/arm/boot/dts/nspire.dtsi
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- *  linux/arch/arm/boot/nspire.dtsi
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&intc>;
-
-	cpus {
-		cpu@0 {
-			compatible = "arm,arm926ej-s";
-		};
-	};
-
-	bootrom: bootrom@00000000 {
-		reg = <0x00000000 0x80000>;
-	};
-
-	sram: sram@A4000000 {
-		device = "memory";
-		reg = <0xA4000000 0x20000>;
-	};
-
-	timer_clk: timer_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	base_clk: base_clk {
-		#clock-cells = <0>;
-		reg = <0x900B0024 0x4>;
-	};
-
-	ahb_clk: ahb_clk {
-		#clock-cells = <0>;
-		reg = <0x900B0024 0x4>;
-		clocks = <&base_clk>;
-	};
-
-	apb_pclk: apb_pclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <2>;
-		clock-mult = <1>;
-		clocks = <&ahb_clk>;
-	};
-
-	usb_phy: usb_phy {
-		compatible = "usb-nop-xceiv";
-	};
-
-	vbus_reg: vbus_reg {
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB VBUS output";
-		regulator-type = "voltage";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		spi: spi@A9000000 {
-			reg = <0xA9000000 0x1000>;
-		};
-
-		usb0: usb@B0000000 {
-			compatible = "lsi,zevio-usb";
-			reg = <0xB0000000 0x1000>;
-			interrupts = <8>;
-
-			usb-phy = <&usb_phy>;
-			vbus-supply = <&vbus_reg>;
-		};
-
-		usb1: usb@B4000000 {
-			reg = <0xB4000000 0x1000>;
-			interrupts = <9>;
-			status = "disabled";
-		};
-
-		lcd: lcd@C0000000 {
-			compatible = "arm,pl111", "arm,primecell";
-			reg = <0xC0000000 0x1000>;
-			interrupts = <21>;
-
-			clocks = <&apb_pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		adc: adc@C4000000 {
-			reg = <0xC4000000 0x1000>;
-			interrupts = <11>;
-		};
-
-		tdes: crypto@C8010000 {
-			reg = <0xC8010000 0x1000>;
-		};
-
-		sha256: crypto@CC000000 {
-			reg = <0xCC000000 0x1000>;
-		};
-
-		apb@90000000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clock-ranges;
-			ranges;
-
-			gpio: gpio@90000000 {
-				compatible = "lsi,zevio-gpio";
-				reg = <0x90000000 0x1000>;
-				interrupts = <7>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			fast_timer: timer@90010000 {
-				reg = <0x90010000 0x1000>;
-				interrupts = <17>;
-			};
-
-			uart: serial@90020000 {
-				reg = <0x90020000 0x1000>;
-				interrupts = <1>;
-			};
-
-			timer0: timer@900C0000 {
-				reg = <0x900C0000 0x1000>;
-
-				clocks = <&timer_clk>;
-			};
-
-			timer1: timer@900D0000 {
-				reg = <0x900D0000 0x1000>;
-				interrupts = <19>;
-
-				clocks = <&timer_clk>;
-			};
-
-			watchdog: watchdog@90060000 {
-				compatible = "arm,amba-primecell";
-				reg = <0x90060000 0x1000>;
-				interrupts = <3>;
-			};
-
-			rtc: rtc@90090000 {
-				reg = <0x90090000 0x1000>;
-				interrupts = <4>;
-			};
-
-			misc: misc@900A0000 {
-				reg = <0x900A0000 0x1000>;
-			};
-
-			pwr: pwr@900B0000 {
-				reg = <0x900B0000 0x1000>;
-				interrupts = <15>;
-			};
-
-			keypad: input@900E0000 {
-				compatible = "ti,nspire-keypad";
-				reg = <0x900E0000 0x1000>;
-				interrupts = <16>;
-
-				scan-interval = <1000>;
-				row-delay = <200>;
-
-				clocks = <&apb_pclk>;
-			};
-
-			contrast: contrast@900F0000 {
-				reg = <0x900F0000 0x1000>;
-			};
-
-			led: led@90110000 {
-				reg = <0x90110000 0x1000>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/nspire/Makefile b/arch/arm/boot/dts/nspire/Makefile
new file mode 100644
index 000000000000..82a2515bdd46
--- /dev/null
+++ b/arch/arm/boot/dts/nspire/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_NSPIRE) += \
+	nspire-cx.dtb \
+	nspire-tp.dtb \
+	nspire-clp.dtb
diff --git a/arch/arm/boot/dts/nspire/nspire-classic.dtsi b/arch/arm/boot/dts/nspire/nspire-classic.dtsi
new file mode 100644
index 000000000000..0ee53d3ecd54
--- /dev/null
+++ b/arch/arm/boot/dts/nspire/nspire-classic.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ */
+
+/include/ "nspire.dtsi"
+
+&lcd {
+	port {
+		clcd_pads: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&fast_timer {
+	/* compatible = "lsi,zevio-timer"; */
+	reg = <0x90010000 0x1000>, <0x900a0010 0x8>;
+};
+
+&uart {
+	compatible = "ns16550";
+	reg-shift = <2>;
+	reg-io-width = <4>;
+	clocks = <&apb_pclk>;
+	no-loopback-test;
+};
+
+&timer0 {
+	/* compatible = "lsi,zevio-timer"; */
+	reg = <0x900c0000 0x1000>, <0x900a0018 0x8>;
+};
+
+&timer1 {
+	compatible = "lsi,zevio-timer";
+	reg = <0x900d0000 0x1000>, <0x900a0020 0x8>;
+};
+
+&keypad {
+	active-low;
+
+};
+
+&base_clk {
+	compatible = "lsi,nspire-classic-clock";
+};
+
+&ahb_clk {
+	compatible = "lsi,nspire-classic-ahb-divider";
+};
+
+
+&vbus_reg {
+	gpio = <&gpio 5 0>;
+};
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x2000000>; /* 32 MB */
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		intc: interrupt-controller@dc000000 {
+			compatible = "lsi,zevio-intc";
+			interrupt-controller;
+			reg = <0xdc000000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	panel {
+		compatible = "ti,nspire-classic-lcd-panel";
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&clcd_pads>;
+			};
+		};
+	};
+	chosen {
+		bootargs = "debug earlyprintk console=tty0 console=ttyS0,115200n8 root=/dev/ram0";
+	};
+};
diff --git a/arch/arm/boot/dts/nspire/nspire-clp.dts b/arch/arm/boot/dts/nspire/nspire-clp.dts
new file mode 100644
index 000000000000..c5773f770fd4
--- /dev/null
+++ b/arch/arm/boot/dts/nspire/nspire-clp.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>

path: root/include/linux/platform_data/sc18is602.h

/* SPDX-License-Identifier: GPL-2.0-only */
/*
 * Platform data for NXP SC18IS602/603
 *
 * Copyright (C) 2012 Guenter Roeck <linux@roeck-us.net>
 *
 * For further information, see the Documentation/spi/spi-sc18is602.rst file.
 */

/**
 * struct sc18is602_platform_data - sc18is602 info
 * @clock_frequency		SC18IS603 oscillator frequency
 */
struct sc18is602_platform_data {
	u32 clock_frequency;
};