diff options
| author | David S. Miller <davem@davemloft.net> | 2016-10-18 11:34:22 -0400 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2016-10-18 11:34:22 -0400 |
| commit | 1441dc99faba2b3fd3a55e18cd955feb3667346a (patch) | |
| tree | 97dff06ab97f91387a88de2dfb3c6d959609d321 | |
| parent | 60d2d8dd9e1a2580541a3d28eb90d092381e2153 (diff) | |
| parent | 44770e1180decf9b483d9b537fdad385a4fbf462 (diff) | |
Merge branch 'ethernet-use-core-min-max-mtu'
Jarod Wilson says:
====================
ethernet: use core min/max MTU checking
Now that the network stack core min/max MTU checking infrastructure is in
place, time to start making drivers use it. We'll start with the easiest
ones, the ethernet drivers, split roughly by vendor, with a catch-all
patch at the end.
For the most part, every patch does the same essential thing: removes the
MTU range checking from the drivers' ndo_change_mtu function, puts those
ranges into the core net_device min_mtu and max_mtu fields, and where
possible, removes ndo_change_mtu functions entirely.
These patches have all been built through the 0-day build infrastructure
provided by Intel, on top of net-next as of October 17.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
102 files changed, 480 insertions, 744 deletions
diff --git a/drivers/net/ethernet/agere/et131x.c b/drivers/net/ethernet/agere/et131x.c index 906683851c7d..831bab352f8e 100644 --- a/drivers/net/ethernet/agere/et131x.c +++ b/drivers/net/ethernet/agere/et131x.c @@ -176,6 +176,8 @@ MODULE_DESCRIPTION("10/100/1000 Base-T Ethernet Driver for the ET1310 by Agere S #define NUM_FBRS 2 #define MAX_PACKETS_HANDLED 256 +#define ET131X_MIN_MTU 64 +#define ET131X_MAX_MTU 9216 #define ALCATEL_MULTICAST_PKT 0x01000000 #define ALCATEL_BROADCAST_PKT 0x02000000 @@ -3869,9 +3871,6 @@ static int et131x_change_mtu(struct net_device *netdev, int new_mtu) int result = 0; struct et131x_adapter *adapter = netdev_priv(netdev); - if (new_mtu < 64 || new_mtu > 9216) - return -EINVAL; - et131x_disable_txrx(netdev); netdev->mtu = new_mtu; @@ -3958,6 +3957,8 @@ static int et131x_pci_setup(struct pci_dev *pdev, netdev->watchdog_timeo = ET131X_TX_TIMEOUT; netdev->netdev_ops = &et131x_netdev_ops; + netdev->min_mtu = ET131X_MIN_MTU; + netdev->max_mtu = ET131X_MAX_MTU; SET_NETDEV_DEV(netdev, &pdev->dev); netdev->ethtool_ops = &et131x_ethtool_ops; diff --git a/drivers/net/ethernet/altera/altera_tse.h b/drivers/net/ethernet/altera/altera_tse.h index e0052003d16f..9b640c8fbc28 100644 --- a/drivers/net/ethernet/altera/altera_tse.h +++ b/drivers/net/ethernet/altera/altera_tse.h @@ -443,7 +443,6 @@ struct altera_tse_private { /* RX/TX MAC FIFO configs */ u32 tx_fifo_depth; u32 rx_fifo_depth; - u32 max_mtu; /* Hash filter settings */ u32 hash_filter; diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/ethernet/altera/altera_tse_main.c index bda31f308cc2..cc9787e33acf 100644 --- a/drivers/net/ethernet/altera/altera_tse_main.c +++ b/drivers/net/ethernet/altera/altera_tse_main.c @@ -994,20 +994,11 @@ static void tse_set_mac(struct altera_tse_private *priv, bool enable) */ static int tse_change_mtu(struct net_device *dev, int new_mtu) { - struct altera_tse_private *priv = netdev_priv(dev); - unsigned int max_mtu = priv->max_mtu; - unsigned int min_mtu = ETH_ZLEN + ETH_FCS_LEN; - if (netif_running(dev)) { netdev_err(dev, "must be stopped to change its MTU\n"); return -EBUSY; } - if ((new_mtu < min_mtu) || (new_mtu > max_mtu)) { - netdev_err(dev, "invalid MTU, max MTU is: %u\n", max_mtu); - return -EINVAL; - } - dev->mtu = new_mtu; netdev_update_features(dev); @@ -1446,15 +1437,16 @@ static int altera_tse_probe(struct platform_device *pdev) of_property_read_bool(pdev->dev.of_node, "altr,has-supplementary-unicast"); + priv->dev->min_mtu = ETH_ZLEN + ETH_FCS_LEN; /* Max MTU is 1500, ETH_DATA_LEN */ - priv->max_mtu = ETH_DATA_LEN; + priv->dev->max_mtu = ETH_DATA_LEN; /* Get the max mtu from the device tree. Note that the * "max-frame-size" parameter is actually max mtu. Definition * in the ePAPR v1.1 spec and usage differ, so go with usage. */ of_property_read_u32(pdev->dev.of_node, "max-frame-size", - &priv->max_mtu); + &priv->dev->max_mtu); /* The DMA buffer size already accounts for an alignment bias * to avoid unaligned access exceptions for the NIOS processor, diff --git a/drivers/net/ethernet/amd/amd8111e.c b/drivers/net/ethernet/amd/amd8111e.c index f92cc97151ec..84b4ffbd084a 100644 --- a/drivers/net/ethernet/amd/amd8111e.c +++ b/drivers/net/ethernet/amd/amd8111e.c @@ -1556,9 +1556,6 @@ static int amd8111e_change_mtu(struct net_device *dev, int new_mtu) struct amd8111e_priv *lp = netdev_priv(dev); int err; - if ((new_mtu < AMD8111E_MIN_MTU) || (new_mtu > AMD8111E_MAX_MTU)) - return -EINVAL; - if (!netif_running(dev)) { /* new_mtu will be used * when device starts netxt time @@ -1874,6 +1871,8 @@ static int amd8111e_probe_one(struct pci_dev *pdev, dev->ethtool_ops = &ops; dev->irq =pdev->irq; dev->watchdog_timeo = AMD8111E_TX_TIMEOUT; + dev->min_mtu = AMD8111E_MIN_MTU; + dev->max_mtu = AMD8111E_MAX_MTU; netif_napi_add(dev, &lp->napi, amd8111e_rx_poll, 32); #if AMD8111E_VLAN_TAG_USED diff --git a/drivers/net/ethernet/atheros/alx/hw.h b/drivers/net/ethernet/atheros/alx/hw.h index 0191477ace51..e42d7e0947eb 100644 --- a/drivers/net/ethernet/atheros/alx/hw.h +++ b/drivers/net/ethernet/atheros/alx/hw.h @@ -351,7 +351,6 @@ struct alx_rrd { #define ALX_MAX_JUMBO_PKT_SIZE (9*1024) #define ALX_MAX_TSO_PKT_SIZE (7*1024) #define ALX_MAX_FRAME_SIZE ALX_MAX_JUMBO_PKT_SIZE -#define ALX_MIN_FRAME_SIZE (ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) #define ALX_MAX_RX_QUEUES 8 #define ALX_MAX_TX_QUEUES 4 diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c index c0f84b73574d..eccbacd96201 100644 --- a/drivers/net/ethernet/atheros/alx/main.c +++ b/drivers/net/ethernet/atheros/alx/main.c @@ -892,6 +892,9 @@ static int alx_init_sw(struct alx_priv *alx) hw->smb_timer = 400; hw->mtu = alx->dev->mtu; alx->rxbuf_size = ALX_MAX_FRAME_LEN(hw->mtu); + /* MTU range: 34 - 9256 */ + alx->dev->min_mtu = 34; + alx->dev->max_mtu = ALX_MAX_FRAME_LEN(ALX_MAX_FRAME_SIZE); alx->tx_ringsz = 256; alx->rx_ringsz = 512; hw->imt = 200; @@ -994,13 +997,6 @@ static int alx_change_mtu(struct net_device *netdev, int mtu) struct alx_priv *alx = netdev_priv(netdev); int max_frame = ALX_MAX_FRAME_LEN(mtu); - if ((max_frame < ALX_MIN_FRAME_SIZE) || - (max_frame > ALX_MAX_FRAME_SIZE)) - return -EINVAL; - - if (netdev->mtu == mtu) - return 0; - netdev->mtu = mtu; alx->hw.mtu = mtu; alx->rxbuf_size = max(max_frame, ALX_DEF_RXBUF_SIZE); diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index a3200ea6d765..773d3b7d8dd5 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -519,6 +519,26 @@ static int atl1c_set_features(struct net_device *netdev, return 0; } +static void atl1c_set_max_mtu(struct net_device *netdev) +{ + struct atl1c_adapter *adapter = netdev_priv(netdev); + struct atl1c_hw *hw = &adapter->hw; + + switch (hw->nic_type) { + /* These (GbE) devices support jumbo packets, max_mtu 6122 */ + case athr_l1c: + case athr_l1d: + case athr_l1d_2: + netdev->max_mtu = MAX_JUMBO_FRAME_SIZE - + (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN); + break; + /* The 10/100 devices don't support jumbo packets, max_mtu 1500 */ + default: + netdev->max_mtu = ETH_DATA_LEN; + break; + } +} + /** * atl1c_change_mtu - Change the Maximum Transfer Unit * @netdev: network interface device structure @@ -529,22 +549,9 @@ static int atl1c_set_features(struct net_device *netdev, static int atl1c_change_mtu(struct net_device *netdev, int new_mtu) { struct atl1c_adapter *adapter = netdev_priv(netdev); - struct atl1c_hw *hw = &adapter->hw; - int old_mtu = netdev->mtu; - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; - - /* Fast Ethernet controller doesn't support jumbo packet */ - if (((hw->nic_type == athr_l2c || - hw->nic_type == athr_l2c_b || - hw->nic_type == athr_l2c_b2) && new_mtu > ETH_DATA_LEN) || - max_frame < ETH_ZLEN + ETH_FCS_LEN || - max_frame > MAX_JUMBO_FRAME_SIZE) { - if (netif_msg_link(adapter)) - dev_warn(&adapter->pdev->dev, "invalid MTU setting\n"); - return -EINVAL; - } + /* set MTU */ - if (old_mtu != new_mtu && netif_running(netdev)) { + if (netif_running(netdev)) { while (test_and_set_bit(__AT_RESETTING, &adapter->flags)) msleep(1); netdev->mtu = new_mtu; @@ -2511,6 +2518,7 @@ static int atl1c_init_netdev(struct net_device *netdev, struct pci_dev *pdev) netdev->netdev_ops = &atl1c_netdev_ops; netdev->watchdog_timeo = AT_TX_WATCHDOG; + netdev->min_mtu = ETH_ZLEN - (ETH_HLEN + VLAN_HLEN); atl1c_set_ethtool_ops(netdev); /* TODO: add when ready */ @@ -2613,6 +2621,9 @@ static int atl1c_probe(struct pci_dev *pdev, const struct pci_device_id *ent) dev_err(&pdev->dev, "net device private data init failed\n"); goto err_sw_init; } + /* set max MTU */ + atl1c_set_max_mtu(netdev); + atl1c_reset_pcie(&adapter->hw, ATL1C_PCIE_L0S_L1_DISABLE); /* Init GPHY as early as possible due to power saving issue */ diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c index 974713b19ab6..e96091b652a7 100644 --- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c +++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c @@ -439,16 +439,10 @@ static int atl1e_set_features(struct net_device *netdev, static int atl1e_change_mtu(struct net_device *netdev, int new_mtu) { struct atl1e_adapter *adapter = netdev_priv(netdev); - int old_mtu = netdev->mtu; int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; - if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || - (max_frame > MAX_JUMBO_FRAME_SIZE)) { - netdev_warn(adapter->netdev, "invalid MTU setting\n"); - return -EINVAL; - } /* set MTU */ - if (old_mtu != new_mtu && netif_running(netdev)) { + if (netif_running(netdev)) { while (test_and_set_bit(__AT_RESETTING, &adapter->flags)) msleep(1); netdev->mtu = new_mtu; @@ -2272,6 +2266,10 @@ static int atl1e_init_netdev(struct net_device *netdev, struct pci_dev *pdev) netdev->netdev_ops = &atl1e_netdev_ops; netdev->watchdog_timeo = AT_TX_WATCHDOG; + /* MTU range: 42 - 8170 */ + netdev->min_mtu = ETH_ZLEN - (ETH_HLEN + VLAN_HLEN); + netdev->max_mtu = MAX_JUMBO_FRAME_SIZE - + (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN); atl1e_set_ethtool_ops(netdev); netdev->hw_features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_TSO | diff --git a/drivers/net/ethernet/atheros/atlx/atl1.c b/drivers/net/ethernet/atheros/atlx/atl1.c index 529bca718334..9aede18aa70f 100644 --- a/drivers/net/ethernet/atheros/atlx/atl1.c +++ b/drivers/net/ethernet/atheros/atlx/atl1.c @@ -2701,23 +2701,15 @@ static void atl1_reset_dev_task(struct work_struct *work) static int atl1_change_mtu(struct net_device *netdev, int new_mtu) { struct atl1_adapter *adapter = netdev_priv(netdev); - int old_mtu = netdev->mtu; int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; - if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || - (max_frame > MAX_JUMBO_FRAME_SIZE)) { - if (netif_msg_link(adapter)) - dev_warn(&adapter->pdev->dev, "invalid MTU setting\n"); - return -EINVAL; - } - adapter->hw.max_frame_size = max_frame; adapter->hw.tx_jumbo_task_th = (max_frame + 7) >> 3; adapter->rx_buffer_len = (max_frame + 7) & ~7; adapter->hw.rx_jumbo_th = adapter->rx_buffer_len / 8; netdev->mtu = new_mtu; - if ((old_mtu != new_mtu) && netif_running(netdev)) { + if (netif_running(netdev)) { atl1_down(adapter); atl1_up(adapter); } @@ -3031,6 +3023,11 @@ static int atl1_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* is this valid? see atl1_setup_mac_ctrl() */ netdev->features |= NETIF_F_RXCSUM; + /* MTU range: 42 - 10218 */ + netdev->min_mtu = ETH_ZLEN - (ETH_HLEN + VLAN_HLEN); + netdev->max_mtu = MAX_JUMBO_FRAME_SIZE - + (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN); + /* * patch for some L1 of old version, * the final version of L1 may not need these diff --git a/drivers/net/ethernet/atheros/atlx/atl2.c b/drivers/net/ethernet/atheros/atlx/atl2.c index 2ff465848b65..6911394115b2 100644 --- a/drivers/net/ethernet/atheros/atlx/atl2.c +++ b/drivers/net/ethernet/atheros/atlx/atl2.c @@ -253,7 +253,7 @@ static int atl2_configure(struct atl2_adapter *adapter) /* set MTU */ ATL2_WRITE_REG(hw, REG_MTU, adapter->netdev->mtu + - ENET_HEADER_SIZE + VLAN_SIZE + ETHERNET_FCS_SIZE); + ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN); /* 1590 */ ATL2_WRITE_REG(hw, REG_TX_CUT_THRESH, 0x177); @@ -925,15 +925,11 @@ static int atl2_change_mtu(struct net_device *netdev, int new_mtu) struct atl2_adapter *adapter = netdev_priv(netdev); struct atl2_hw *hw = &adapter->hw; - if ((new_mtu < 40) || (new_mtu > (ETH_DATA_LEN + VLAN_SIZE))) - return -EINVAL; - /* set MTU */ - if (hw->max_frame_size != new_mtu) { - netdev->mtu = new_mtu; - ATL2_WRITE_REG(hw, REG_MTU, new_mtu + ENET_HEADER_SIZE + - VLAN_SIZE + ETHERNET_FCS_SIZE); - } + netdev->mtu = new_mtu; + hw->max_frame_size = new_mtu; + ATL2_WRITE_REG(hw, REG_MTU, new_mtu + ETH_HLEN + + VLAN_HLEN + ETH_FCS_LEN); return 0; } @@ -1398,6 +1394,8 @@ static int atl2_probe(struct pci_dev *pdev, const struct pci_device_id *ent) netdev->netdev_ops = &atl2_netdev_ops; netdev->ethtool_ops = &atl2_ethtool_ops; netdev->watchdog_timeo = 5 * HZ; + netdev->min_mtu = 40; + netdev->max_mtu = ETH_DATA_LEN + VLAN_HLEN; strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); netdev->mem_start = mmio_start; diff --git a/drivers/net/ethernet/atheros/atlx/atl2.h b/drivers/net/ethernet/atheros/atlx/atl2.h index 2f27d4c4c3ad..c64a6bdfa7ae 100644 --- a/drivers/net/ethernet/atheros/atlx/atl2.h +++ b/drivers/net/ethernet/atheros/atlx/atl2.h @@ -228,12 +228,9 @@ static void atl2_force_ps(struct atl2_hw *hw); #define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x000F /* Everything */ /* The size (in bytes) of a ethernet packet */ -#define ENET_HEADER_SIZE 14 #define MAXIMUM_ETHERNET_FRAME_SIZE 1518 /* with FCS */ #define MINIMUM_ETHERNET_FRAME_SIZE 64 /* with FCS */ -#define ETHERNET_FCS_SIZE 4 #define MAX_JUMBO_FRAME_SIZE 0x2000 -#define VLAN_SIZE 4 struct tx_pkt_header { unsigned pkt_size:11; diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c index 17aa33c5567d..1df3048a3cdb 100644 --- a/drivers/net/ethernet/broadcom/b44.c +++ b/drivers/net/ethernet/broadcom/b44.c @@ -59,8 +59,8 @@ #define B44_TX_TIMEOUT (5 * HZ) /* hardware minimum and maximum for a single frame's data payload */ -#define B44_MIN_MTU 60 -#define B44_MAX_MTU 1500 +#define B44_MIN_MTU ETH_ZLEN +#define B44_MAX_MTU ETH_DATA_LEN #define B44_RX_RING_SIZE 512 #define B44_DEF_RX_RING_PENDING 200 @@ -1064,9 +1064,6 @@ static int b44_change_mtu(struct net_device *dev, int new_mtu) { struct b44 *bp = netdev_priv(dev); - if (new_mtu < B44_MIN_MTU || new_mtu > B44_MAX_MTU) - return -EINVAL; - if (!netif_running(dev)) { /* We'll just catch it later when the * device is up'd. @@ -2377,6 +2374,8 @@ static int b44_init_one(struct ssb_device *sdev, dev->netdev_ops = &b44_netdev_ops; netif_napi_add(dev, &bp->napi, b44_poll, 64); dev->watchdog_timeo = B44_TX_TIMEOUT; + dev->min_mtu = B44_MIN_MTU; + dev->max_mtu = B44_MAX_MTU; dev->irq = sdev->irq; dev->ethtool_ops = &b44_ethtool_ops; diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c index ae364c74baf3..7e513cacb57a 100644 --- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c +++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c @@ -1622,20 +1622,19 @@ static int bcm_enet_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) } /* - * calculate actual hardware mtu + * adjust mtu, can't be called while device is running */ -static int compute_hw_mtu(struct bcm_enet_priv *priv, int mtu) +static int bcm_enet_change_mtu(struct net_device *dev, int new_mtu) { - int actual_mtu; + struct bcm_enet_priv *priv = netdev_priv(dev); + int actual_mtu = new_mtu; - actual_mtu = mtu; + if (netif_running(dev)) + return -EBUSY; /* add ethernet header + vlan tag size */ actual_mtu += VLAN_ETH_HLEN; - if (actual_mtu < 64 || actual_mtu > BCMENET_MAX_MTU) - return -EINVAL; - /* * setup maximum size before we get overflow mark in * descriptor, note that this will not prevent reception of @@ -1650,22 +1649,7 @@ static int compute_hw_mtu(struct bcm_enet_priv *priv, int mtu) */ priv->rx_skb_size = ALIGN(actual_mtu + ETH_FCS_LEN, priv->dma_maxburst * 4); - return 0; -} -/* - * adjust mtu, can't be called while device is running - */ -static int bcm_enet_change_mtu(struct net_device *dev, int new_mtu) -{ - int ret; - - if (netif_running(dev)) - return -EBUSY; - - ret = compute_hw_mtu(netdev_priv(dev), new_mtu); - if (ret) - return ret; dev->mtu = new_mtu; return 0; } @@ -1755,7 +1739,7 @@ static int bcm_enet_probe(struct platform_device *pdev) priv->enet_is_sw = false; priv->dma_maxburst = BCMENET_DMA_MAXBURST; - ret = compute_hw_mtu(priv, dev->mtu); + ret = bcm_enet_change_mtu(dev, dev->mtu); if (ret) goto out; @@ -1888,6 +1872,9 @@ static int bcm_enet_probe(struct platform_device *pdev) netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16); dev->ethtool_ops = &bcm_enet_ethtool_ops; + /* MTU range: 46 - 2028 */ + dev->min_mtu = ETH_ZLEN - ETH_HLEN; + dev->max_mtu = BCMENET_MAX_MTU - VLAN_ETH_HLEN; SET_NETDEV_DEV(dev, &pdev->dev); ret = register_netdev(dev); @@ -2742,7 +2729,7 @@ static int bcm_enetsw_probe(struct platform_device *pdev) priv->dma_chan_width = pd->dma_chan_width; } - ret = compute_hw_mtu(priv, dev->mtu); + ret = bcm_enet_change_mtu(dev, dev->mtu); if (ret) goto out; diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index 27f11a5d5fe2..2a5df3f71e9f 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -2298,7 +2298,7 @@ bnx2_init_5706s_phy(struct bnx2 *bp, int reset_phy) if (BNX2_CHIP(bp) == BNX2_CHIP_5706) BNX2_WR(bp, BNX2_MISC_GP_HW_CTL0, 0x300); - if (bp->dev->mtu > 1500) { + if (bp->dev->mtu > ETH_DATA_LEN) { u32 val; /* Set extended packet length bit */ @@ -2352,7 +2352,7 @@ bnx2_init_copper_phy(struct bnx2 *bp, int reset_phy) bnx2_write_phy(bp, MII_BNX2_DSP_RW_PORT, val); } - if (bp->dev->mtu > 1500) { + if (bp->dev->mtu > ETH_DATA_LEN) { /* Set extended packet length bit */ bnx2_write_phy(bp, 0x18, 0x7); bnx2_read_phy(bp, 0x18, &val); @@ -4985,12 +4985,12 @@ bnx2_init_chip(struct bnx2 *bp) /* Program the MTU. Also include 4 bytes for CRC32. */ mtu = bp->dev->mtu; val = mtu + ETH_HLEN + ETH_FCS_LEN; - if (val > (MAX_ETHERNET_PACKET_SIZE + 4)) + if (val > (MAX_ETHERNET_PACKET_SIZE + ETH_HLEN + 4)) val |= BNX2_EMAC_RX_MTU_SIZE_JUMBO_ENA; BNX2_WR(bp, BNX2_EMAC_RX_MTU_SIZE, val); - if (mtu < 1500) - mtu = 1500; + if (mtu < ETH_DATA_LEN) + mtu = ETH_DATA_LEN; bnx2_reg_wr_ind(bp, BNX2_RBUF_CONFIG, BNX2_RBUF_CONFIG_VAL(mtu)); bnx2_reg_wr_ind(bp, BNX2_RBUF_CONFIG2, BNX2_RBUF_CONFIG2_VAL(mtu)); @@ -7896,10 +7896,6 @@ bnx2_change_mtu(struct net_device *dev, int new_mtu) { struct bnx2 *bp = netdev_priv(dev); - if (((new_mtu + ETH_HLEN) > MAX_ETHERNET_JUMBO_PACKET_SIZE) || - ((new_mtu + ETH_HLEN) < MIN_ETHERNET_PACKET_SIZE)) - return -EINVAL; - dev->mtu = new_mtu; return bnx2_change_ring_size(bp, bp->rx_ring_size, bp->tx_ring_size, false); @@ -8589,6 +8585,8 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) dev->hw_features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX; dev->features |= dev->hw_features; dev->priv_flags |= IFF_UNICAST_FLT; + dev->min_mtu = MIN_ETHERNET_PACKET_SIZE; + dev->max_mtu = MAX_ETHERNET_JUMBO_PACKET_SIZE; if (!(bp->flags & BNX2_FLAG_CAN_KEEP_VLAN)) dev->hw_features &= ~NETIF_F_HW_VLAN_CTAG_RX; diff --git a/drivers/net/ethernet/broadcom/bnx2.h b/drivers/net/ethernet/broadcom/bnx2.h index 380234d72b95..a09ec47461c9 100644 --- a/drivers/net/ethernet/broadcom/bnx2.h +++ b/drivers/net/ethernet/broadcom/bnx2.h @@ -6530,9 +6530,9 @@ struct l2_fhdr { #define MII_BNX2_AER_AER_AN_MMD 0x3800 #define MII_BNX2_BLK_ADDR_COMBO_IEEEB0 0xffe0 -#define MIN_ETHERNET_PACKET_SIZE 60 -#define MAX_ETHERNET_PACKET_SIZE 1514 -#define MAX_ETHERNET_JUMBO_PACKET_SIZE 9014 +#define MIN_ETHERNET_PACKET_SIZE (ETH_ZLEN - ETH_HLEN) +#define MAX_ETHERNET_PACKET_SIZE ETH_DATA_LEN +#define MAX_ETHERNET_JUMBO_PACKET_SIZE 9000 #define BNX2_RX_COPY_THRESH 128 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 7dd7490fdac1..0a23034bbe3f 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1396,9 +1396,9 @@ struct bnx2x { int tx_ring_size; /* L2 header size + 2*VLANs (8 bytes) + LLC SNAP (8 bytes) */ -#define ETH_OVREHEAD (ETH_HLEN + 8 + 8) -#define ETH_MIN_PACKET_SIZE 60 -#define ETH_MAX_PACKET_SIZE 1500 +#define ETH_OVERHEAD (ETH_HLEN + 8 + 8) +#define ETH_MIN_PACKET_SIZE (ETH_ZLEN - ETH_HLEN) +#define ETH_MAX_PACKET_SIZE ETH_DATA_LEN #define ETH_MAX_JUMBO_PACKET_SIZE 9600 /* TCP with Timestamp Option (32) + IPv6 (40) */ #define ETH_MAX_TPA_HEADER_SIZE 72 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 0a9108cd4c45..ed42c1009685 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -2023,7 +2023,7 @@ static void bnx2x_set_rx_buf_size(struct bnx2x *bp) mtu = bp->dev->mtu; fp->rx_buf_size = BNX2X_FW_RX_ALIGN_START + IP_HEADER_ALIGNMENT_PADDING + - ETH_OVREHEAD + + ETH_OVERHEAD + mtu + BNX2X_FW_RX_ALIGN_END; /* Note : rx_buf_size doesn't take into account NET_SKB_PAD */ @@ -4855,12 +4855,6 @@ int bnx2x_change_mtu(struct net_device *dev, int new_mtu) return -EAGAIN; } - if ((new_mtu > ETH_MAX_JUMBO_PACKET_SIZE) || - ((new_mtu + ETH_HLEN) < ETH_MIN_PACKET_SIZE)) { - BNX2X_ERR("Can't support requested MTU size\n"); - return -EINVAL; - } - /* This does not race with packet allocation * because the actual alloc size is * only updated as part of load diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 1fb80100e5e7..05356efdbf93 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -34,12 +34,6 @@ typedef int (*read_sfp_module_eeprom_func_p)(struct bnx2x_phy *phy, u8 dev_addr, u16 addr, u8 byte_cnt, u8 *o_buf, u8); /********************************************************/ -#define ETH_HLEN 14 -/* L2 header size + 2*VLANs (8 bytes) + LLC SNAP (8 bytes) */ -#define ETH_OVREHEAD (ETH_HLEN + 8 + 8) -#define ETH_MIN_PACKET_SIZE 60 -#define ETH_MAX_PACKET_SIZE 1500 -#define ETH_MAX_JUMBO_PACKET_SIZE 9600 #define MDIO_ACCESS_TIMEOUT 1000 #define WC_LANE_MAX 4 #define I2C_SWITCH_WIDTH 2 @@ -1917,7 +1911,7 @@ static int bnx2x_emac_enable(struct link_params *params, /* Enable emac for jumbo packets */ EMAC_WR(bp, EMAC_REG_EMAC_RX_MTU_SIZE, (EMAC_RX_MTU_SIZE_JUMBO_ENA | - (ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD))); + (ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVERHEAD))); /* Strip CRC */ REG_WR(bp, NIG_REG_NIG_INGRESS_EMAC0_NO_CRC + port*4, 0x1); @@ -2314,19 +2308,19 @@ static int bnx2x_bmac1_enable(struct link_params *params, REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL, wb_data, 2); /* Set rx mtu */ - wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD; + wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVERHEAD; wb_data[1] = 0; REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_MAX_SIZE, wb_data, 2); bnx2x_update_pfc_bmac1(params, vars); /* Set tx mtu */ - wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD; + wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVERHEAD; wb_data[1] = 0; REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_MAX_SIZE, wb_data, 2); /* Set cnt max size */ - wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD; + wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVERHEAD; wb_data[1] = 0; REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_CNT_MAX_SIZE, wb_data, 2); @@ -2384,18 +2378,18 @@ static int bnx2x_bmac2_enable(struct link_params *params, udelay(30); /* Set RX MTU */ - wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD; + wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVERHEAD; wb_data[1] = 0; REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_RX_MAX_SIZE, wb_data, 2); udelay(30); /* Set TX MTU */ - wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD; + wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVERHEAD; wb_data[1] = 0; REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_TX_MAX_SIZE, wb_data, 2); udelay(30); /* Set cnt max size */ - wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD - 2; + wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVERHEAD - 2; wb_data[1] = 0; REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_CNT_MAX_SIZE, wb_data, 2); udelay(30); @@ -2516,7 +2510,7 @@ static int bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl, } else { u32 thresh = (ETH_MAX_JUMBO_PACKET_SIZE + - ETH_OVREHEAD)/16; + ETH_OVERHEAD)/16; REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0); /* Update threshold */ REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, thresh); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 20fe6a8c35c1..67b6180bdbf6 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -12080,8 +12080,7 @@ static int bnx2x_get_hwinfo(struct bnx2x *bp) mtu_size, mtu); /* if valid: update device mtu */ - if (((mtu_size + ETH_HLEN) >= - ETH_MIN_PACKET_SIZE) && + if ((mtu_size >= ETH_MIN_PACKET_SIZE) && (mtu_size <= ETH_MAX_JUMBO_PACKET_SIZE)) bp->dev->mtu = mtu_size; @@ -13315,6 +13314,10 @@ static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev, dev->dcbnl_ops = &bnx2x_dcbnl_ops; #endif + /* MTU range, 46 - 9600 */ + dev->min_mtu = ETH_MIN_PACKET_SIZE; + dev->max_mtu = ETH_MAX_JUMBO_PACKET_SIZE; + /* get_port_hwinfo() will set prtad and mmds properly */ bp->mdio.prtad = MDIO_PRTAD_NONE; bp->mdio.mmds = 0; diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index a9f9f3738022..a042da1ff4b9 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -6290,9 +6290,6 @@ static int bnxt_change_mtu(struct net_device *dev, int new_mtu) { struct bnxt *bp = netdev_priv(dev); - if (new_mtu < 60 || new_mtu > 9500) - return -EINVAL; - if (netif_running(dev)) bnxt_close_nic(bp, false, false); @@ -6870,6 +6867,10 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) dev->features |= dev->hw_features | NETIF_F_HIGHDMA; dev->priv_flags |= IFF_UNICAST_FLT; + /* MTU range: 60 - 9500 */ + dev->min_mtu = ETH_ZLEN; + dev->max_mtu = 9500; + #ifdef CONFIG_BNXT_SRIOV init_waitqueue_head(&bp->sriov_cfg_wait); #endif diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index a927a730da10..185e9e047aa9 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -124,7 +124,7 @@ static inline void _tg3_flag_clear(enum TG3_FLAGS flag, unsigned long *bits) #define TG3_TX_TIMEOUT (5 * HZ) /* hardware minimum and maximum for a single frame's data payload */ -#define TG3_MIN_MTU 60 +#define TG3_MIN_MTU ETH_ZLEN #define TG3_MAX_MTU(tp) \ (tg3_flag(tp, JUMBO_CAPABLE) ? 9000 : 1500) @@ -14199,9 +14199,6 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu) int err; bool reset_phy = false; - if (new_mtu < TG3_MIN_MTU || new_mtu > TG3_MAX_MTU(tp)) - return -EINVAL; - if (!netif_running(dev)) { /* We'll just catch it later when the * device is up'd. @@ -17799,6 +17796,10 @@ static int tg3_init_one(struct pci_dev *pdev, dev->hw_features |= features; dev->priv_flags |= IFF_UNICAST_FLT; + /* MTU range: 60 - 9000 or 1500, depending on hardware */ + dev->min_mtu = TG3_MIN_MTU; + dev->max_mtu = TG3_MAX_MTU(tp); + if (tg3_chip_rev_id(tp) == CHIPREV_ID_5705_A1 && !tg3_flag(tp, TSO_CAPABLE) && !(tr32(TG3PCI_PCISTATE) & PCISTATE_BUS_SPEED_HIGH)) { diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c index f9df4b5ae90e..b200a783443e 100644 --- a/drivers/net/ethernet/brocade/bna/bnad.c +++ b/drivers/net/ethernet/brocade/bna/bnad.c @@ -3296,9 +3296,6 @@ bnad_change_mtu(struct net_device *netdev, int new_mtu) struct bnad *bnad = netdev_priv(netdev); u32 rx_count = 0, frame, new_frame; - if (new_mtu + ETH_HLEN < ETH_ZLEN || new_mtu > BNAD_JUMBO_MTU) - return -EINVAL; - mutex_lock(&bnad->conf_mutex); mtu = netdev->mtu; @@ -3465,6 +3462,10 @@ bnad_netdev_init(struct bnad *bnad, bool using_dac) netdev->mem_start = bnad->mmio_start; netdev->mem_end = bnad->mmio_start + bnad->mmio_len - 1; + /* MTU range: 46 - 9000 */ + netdev->min_mtu = ETH_ZLEN - ETH_HLEN; + netdev->max_mtu = BNAD_JUMBO_MTU; + netdev->netdev_ops = &bnad_netdev_ops; bnad_set_ethtool_ops(netdev); } diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index 20e72044b765..e83781ad4477 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -56,7 +56,7 @@ #define MACB_MAX_TX_LEN ((unsigned int)((1 << MACB_TX_FRMLEN_SIZE) - 1)) #define GEM_MAX_TX_LEN ((unsigned int)((1 << GEM_TX_FRMLEN_SIZE) - 1)) -#define GEM_MTU_MIN_SIZE 68 +#define GEM_MTU_MIN_SIZE ETH_MIN_MTU #define MACB_WOL_HAS_MAGIC_PACKET (0x1 << 0) #define MACB_WOL_ENABLED (0x1 << 1) @@ -1986,19 +1986,9 @@ static int macb_close(struct net_device *dev) static int macb_change_mtu(struct net_device *dev, int new_mtu) { - struct macb *bp = netdev_priv(dev); - u32 max_mtu; - if (netif_running(dev)) return -EBUSY; - max_mtu = ETH_DATA_LEN; - if (bp->caps & MACB_CAPS_JUMBO) - max_mtu = gem_readl(bp, JML) - ETH_HLEN - ETH_FCS_LEN; - - if ((new_mtu > max_mtu) || (new_mtu < GEM_MTU_MIN_SIZE)) - return -EINVAL; - dev->mtu = new_mtu; return 0; @@ -3027,6 +3017,13 @@ static int macb_probe(struct platform_device *pdev) goto err_out_free_netdev; } + /* MTU range: 68 - 1500 or 10240 */ + dev->min_mtu = GEM_MTU_MIN_SIZE; + if (bp->caps & MACB_CAPS_JUMBO) + dev->max_mtu = gem_readl(bp, JML) - ETH_HLEN - ETH_FCS_LEN; + else + dev->max_mtu = ETH_DATA_LEN; + mac = of_get_mac_address(np); if (mac) ether_addr_copy(bp->dev->dev_addr, mac); diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c index 63efa0dc45ba..6e723662ee69 100644 --- a/drivers/net/ethernet/calxeda/xgmac.c +++ b/drivers/net/ethernet/calxeda/xgmac.c @@ -394,7 +394,7 @@ struct xgmac_priv { }; /* XGMAC Configuration Settings */ -#define MAX_MTU 9000 +#define XGMAC_MAX_MTU 9000 #define PAUSE_TIME 0x400 #define DMA_RX_RING_SZ 256 @@ -1360,20 +1360,6 @@ out: */ static int xgmac_change_mtu(struct net_device *dev, int new_mtu) { - struct xgmac_priv *priv = netdev_priv(dev); - int old_mtu; - - if ((new_mtu < 46) || (new_mtu > MAX_MTU)) { - netdev_err(priv->dev, "invalid MTU, max MTU is: %d\n", MAX_MTU); - return -EINVAL; - } - - old_mtu = dev->mtu; - - /* return early if the buffer sizes will not change */ - if (old_mtu == new_mtu) - return 0; - /* Stop everything, get ready to change the MTU */ if (!netif_running(dev)) return 0; @@ -1804,6 +1790,10 @@ static int xgmac_probe(struct platform_device *pdev) ndev->features |= ndev->hw_features; ndev->priv_flags |= IFF_UNICAST_FLT; + /* MTU range: 46 - 9000 */ + ndev->min_mtu = ETH_ZLEN - ETH_HLEN; + ndev->max_mtu = XGMAC_MAX_MTU; + /* Get the MAC address */ xgmac_get_mac_addr(priv->base, ndev->dev_addr, 0); if (!is_valid_ether_addr(ndev->dev_addr)) diff --git a/drivers/net/ethernet/cavium/liquidio/lio_main.c b/drivers/net/ethernet/cavium/liquidio/lio_main.c index afc6f9dc8119..71d01a77896d 100644 --- a/drivers/net/ethernet/cavium/liquidio/lio_main.c +++ b/drivers/net/ethernet/cavium/liquidio/lio_main.c @@ -2868,17 +2868,6 @@ static int liquidio_change_mtu(struct net_device *netdev, int new_mtu) struct octnic_ctrl_pkt nctrl; int ret = 0; - /* Limit the MTU to make sure the ethernet packets are between 68 bytes - * and 16000 bytes - */ - if ((new_mtu < LIO_MIN_MTU_SIZE) || - (new_mtu > LIO_MAX_MTU_SIZE)) { - dev_err(&oct->pci_dev->dev, "Invalid MTU: %d\n", new_mtu); - dev_err(&oct->pci_dev->dev, "Valid range %d and %d\n", - LIO_MIN_MTU_SIZE, LIO_MAX_MTU_SIZE); - return -EINVAL; - } - memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt)); nctrl.ncmd.u64 = 0; @@ -3891,6 +3880,10 @@ static int setup_nic_devices(struct octeon_device *octeon_dev) netdev->hw_features = netdev->hw_features & ~NETIF_F_HW_VLAN_CTAG_RX; + /* MTU range: 68 - 16000 */ + netdev->min_mtu = LIO_MIN_MTU_SIZE; + netdev->max_mtu = LIO_MAX_MTU_SIZE; + /* Point to the properties for octeon device to which this * interface belongs. */ diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_network.h b/drivers/net/ethernet/cavium/liquidio/octeon_network.h index e5d1debd05ad..54b966596323 100644 --- a/drivers/net/ethernet/cavium/liquidio/octeon_network.h +++ b/drivers/net/ethernet/cavium/liquidio/octeon_network.h @@ -29,7 +29,7 @@ #include <linux/ptp_clock_kernel.h> #define LIO_MAX_MTU_SIZE (OCTNET_MAX_FRM_SIZE - OCTNET_FRM_HEADER_SIZE) -#define LIO_MIN_MTU_SIZE 68 +#define LIO_MIN_MTU_SIZE ETH_MIN_MTU struct oct_nic_stats_resp { u64 rh; diff --git a/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c b/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c index 4ab404f45b21..16e12c45904b 100644 --- a/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c +++ b/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c @@ -645,16 +645,6 @@ static int octeon_mgmt_change_mtu(struct net_device *netdev, int new_mtu) struct octeon_mgmt *p = netdev_priv(netdev); int size_without_fcs = new_mtu + OCTEON_MGMT_RX_HEADROOM; - /* Limit the MTU to make sure the ethernet packets are between - * 64 bytes and 16383 bytes. - */ - if (size_without_fcs < 64 || size_without_fcs > 16383) { - dev_warn(p->dev, "MTU must be between %d and %d.\n", - 64 - OCTEON_MGMT_RX_HEADROOM, - 16383 - OCTEON_MGMT_RX_HEADROOM); - return -EINVAL; - } - netdev->mtu = new_mtu; cvmx_write_csr(p->agl + AGL_GMX_RX_FRM_MAX, size_without_fcs); @@ -1491,6 +1481,9 @@ static int octeon_mgmt_probe(struct platform_device *pdev) netdev->netdev_ops = &octeon_mgmt_ops; netdev->ethtool_ops = &octeon_mgmt_ethtool_ops; + netdev->min_mtu = 64 - OCTEON_MGMT_RX_HEADROOM; + netdev->max_mtu = 16383 - OCTEON_MGMT_RX_HEADROOM; + mac = of_get_mac_address(pdev->dev.of_node); if (mac) diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_main.c b/drivers/net/ethernet/cavium/thunder/nicvf_main.c index 45a13f718863..b192712c93b7 100644 --- a/drivers/net/ethernet/cavium/thunder/nicvf_main.c +++ b/drivers/net/ethernet/cavium/thunder/nicvf_main.c @@ -1312,12 +1312,6 @@ static int nicvf_change_mtu(struct net_device *netdev, int new_mtu) { struct nicvf *nic = netdev_priv(netdev); - if (new_mtu > NIC_HW_MAX_FRS) - return -EINVAL; - - if (new_mtu < NIC_HW_MIN_FRS) - return -EINVAL; - if (nicvf_update_hw_max_frs(nic, new_mtu)) return -EINVAL; netdev->mtu = new_mtu; @@ -1630,6 +1624,10 @@ static int nicvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) netdev->netdev_ops = &nicvf_netdev_ops; netdev->watchdog_timeo = NICVF_TX_TIMEOUT; + /* MTU range: 64 - 9200 */ + netdev->min_mtu = NIC_HW_MIN_FRS; + netdev->max_mtu = NIC_HW_MAX_FRS; + INIT_WORK(&nic->reset_task, nicvf_reset_task); err = register_netdev(netdev); diff --git a/drivers/net/ethernet/chelsio/cxgb/common.h b/drivers/net/ethernet/chelsio/cxgb/common.h index 53b1f9478383..6916c62f2487 100644 --- a/drivers/net/ethernet/chelsio/cxgb/common.h +++ b/drivers/net/ethernet/chelsio/cxgb/common.h @@ -85,6 +85,11 @@ struct t1_rx_mode { #define SPEED_INVALID 0xffff #define DUPLEX_INVALID 0xff +/* Max frame size PM3393 can handle. Includes Ethernet header and CRC. */ +#define PM3393_MAX_FRAME_SIZE 9600 + +#define VSC7326_MAX_MTU 9600 + enum { CHBT_BOARD_N110, CHBT_BOARD_N210, diff --git a/drivers/net/ethernet/chelsio/cxgb/cxgb2.c b/drivers/net/ethernet/chelsio/cxgb/cxgb2.c index f5f1b0b51ebd..81d1d0bc7553 100644 --- a/drivers/net/ethernet/chelsio/cxgb/cxgb2.c +++ b/drivers/net/ethernet/chelsio/cxgb/cxgb2.c @@ -825,8 +825,6 @@ static int t1_change_mtu(struct net_device *dev, int new_mtu) if (!mac->ops->set_mtu) return -EOPNOTSUPP; - if (new_mtu < 68) - return -EINVAL; if ((ret = mac->ops->set_mtu(mac, new_mtu))) return ret; dev->mtu = new_mtu; @@ -1101,6 +1099,22 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent) netif_napi_add(netdev, &adapter->napi, t1_poll, 64); netdev->ethtool_ops = &t1_ethtool_ops; + + switch (bi->board) { + case CHBT_BOARD_CHT110: + case CHBT_BOARD_N110: + case CHBT_BOARD_N210: + case CHBT_BOARD_CHT210: + netdev->max_mtu = PM3393_MAX_FRAME_SIZE - + (ETH_HLEN + ETH_FCS_LEN); + break; + case CHBT_BOARD_CHN204: + netdev->max_mtu = VSC7326_MAX_MTU; + break; + default: + netdev->max_mtu = ETH_DATA_LEN; + break; + } } if (t1_init_sw_modules(adapter, bi) < 0) { diff --git a/drivers/net/ethernet/chelsio/cxgb/pm3393.c b/drivers/net/ethernet/chelsio/cxgb/pm3393.c index eb462d7db427..c27908e66f5e 100644 --- a/drivers/net/ethernet/chelsio/cxgb/pm3393.c +++ b/drivers/net/ethernet/chelsio/cxgb/pm3393.c @@ -47,9 +47,6 @@ #define OFFSET(REG_ADDR) ((REG_ADDR) << 2) -/* Max frame size PM3393 can handle. Includes Ethernet header and CRC. */ -#define MAX_FRAME_SIZE 9600 - #define IPG 12 #define TXXG_CONF1_VAL ((IPG << SUNI1x10GEXP_BITOFF_TXXG_IPGT) | \ SUNI1x10GEXP_BITMSK_TXXG_32BIT_ALIGN | SUNI1x10GEXP_BITMSK_TXXG_CRCEN | \ @@ -331,10 +328,7 @@ static int pm3393_set_mtu(struct cmac *cmac, int mtu) { int enabled = cmac->instance->enabled; - /* MAX_FRAME_SIZE includes header + FCS, mtu doesn't */ - mtu += 14 + 4; - if (mtu > MAX_FRAME_SIZE) - return -EINVAL; + mtu += ETH_HLEN + ETH_FCS_LEN; /* Disable Rx/Tx MAC before configuring it. */ if (enabled) diff --git a/drivers/net/ethernet/chelsio/cxgb/vsc7326.c b/drivers/net/ethernet/chelsio/cxgb/vsc7326.c index 6f30b6f78553..bdc895bd2a46 100644 --- a/drivers/net/ethernet/chelsio/cxgb/vsc7326.c +++ b/drivers/net/ethernet/chelsio/cxgb/vsc7326.c @@ -11,8 +11,6 @@ /* 30 minutes for full statistics update */ #define MAJOR_UPDATE_TICKS (1800 / STATS_TICK_SECS) -#define MAX_MTU 9600 - /* The egress WM value 0x01a01fff should be used only when the * interface is down (MAC port disabled). This is a workaround * for disabling the T2/MAC flow-control. When the interface is @@ -452,9 +450,6 @@ static int mac_set_mtu(struct cmac *mac, int mtu) { int port = mac->instance->index; - if (mtu > MAX_MTU) - return -EINVAL; - /* max_len includes header and FCS */ vsc_write(mac->adapter, REG_MAX_LEN(port), mtu + 14 + 4); return 0; diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c index 48f82ab6c25b..f514faf8b709 100644 --- a/drivers/net/ethernet/cisco/enic/enic_main.c +++ b/drivers/net/ethernet/cisco/enic/enic_main.c @@ -1843,9 +1843,6 @@ static int enic_change_mtu(struct net_device *netdev, int new_mtu) struct enic *enic = netdev_priv(netdev); int running = netif_running(netdev); - if (new_mtu < ENIC_MIN_MTU || new_mtu > ENIC_MAX_MTU) - return -EINVAL; - if (enic_is_dynamic(enic) || enic_is_sriov_vf(enic)) return -EOPNOTSUPP; @@ -2751,6 +2748,10 @@ static int enic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) netdev->priv_flags |= IFF_UNICAST_FLT; + /* MTU range: 68 - 9000 */ + netdev->min_mtu = ENIC_MIN_MTU; + netdev->max_mtu = ENIC_MAX_MTU; + err = register_netdev(netdev); if (err) { dev_err(dev, "Cannot register net device, aborting\n"); diff --git a/drivers/net/ethernet/cisco/enic/enic_res.h b/drivers/net/ethernet/cisco/enic/enic_res.h index 69f60afd6577..81f98a8b60e9 100644 --- a/drivers/net/ethernet/cisco/enic/enic_res.h +++ b/drivers/net/ethernet/cisco/enic/enic_res.h @@ -30,7 +30,7 @@ #define ENIC_MIN_RQ_DESCS 64 #define ENIC_MAX_RQ_DESCS 4096 -#define ENIC_MIN_MTU 68 +#define ENIC_MIN_MTU ETH_MIN_MTU #define ENIC_MAX_MTU 9000 #define ENIC_MULTICAST_PERFECT_FILTERS 32 diff --git a/drivers/net/ethernet/dlink/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c index 78f144696d6b..8c95a8a81e3c 100644 --- a/drivers/net/ethernet/dlink/dl2k.c +++ b/drivers/net/ethernet/dlink/dl2k.c @@ -76,7 +76,6 @@ static void rio_free_tx (struct net_device *dev, int irq); static void tx_error (struct net_device *dev, int tx_status); static int receive_packet (struct net_device *dev); static void rio_error (struct net_device *dev, int int_status); -static int change_mtu (struct net_device *dev, int new_mtu); static void set_multicast (struct net_device *dev); static struct net_device_stats *get_stats (struct net_device *dev); static int clear_stats (struct net_device *dev); @@ -106,7 +105,6 @@ static const struct net_device_ops netdev_ops = { .ndo_set_rx_mode = set_multicast, .ndo_do_ioctl = rio_ioctl, .ndo_tx_timeout = rio_tx_timeout, - .ndo_change_mtu = change_mtu, }; static int @@ -230,6 +228,10 @@ rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent) #if 0 dev->features = NETIF_F_IP_CSUM; #endif + /* MTU range: 68 - 1536 or 8000 */ + dev->min_mtu = ETH_MIN_MTU; + dev->max_mtu = np->jumbo ? MAX_JUMBO : PACKET_SIZE; + pci_set_drvdata (pdev, dev); ring_space = pci_alloc_consistent (pdev, TX_TOTAL_SIZE, &ring_dma); @@ -1198,22 +1200,6 @@ clear_stats (struct net_device *dev) return 0; } - -static int -change_mtu (struct net_device *dev, int new_mtu) -{ - struct netdev_private *np = netdev_priv(dev); - int max = (np->jumbo) ? MAX_JUMBO : 1536; - - if ((new_mtu < 68) || (new_mtu > max)) { - return -EINVAL; - } - - dev->mtu = new_mtu; - - return 0; -} - static void set_multicast (struct net_device *dev) { diff --git a/drivers/net/ethernet/dlink/sundance.c b/drivers/net/ethernet/dlink/sundance.c index 79d80090eac8..eab36acfc0d1 100644 --- a/drivers/net/ethernet/dlink/sundance.c +++ b/drivers/net/ethernet/dlink/sundance.c @@ -580,6 +580,10 @@ static int sundance_probe1(struct pci_dev *pdev, dev->ethtool_ops = ðtool_ops; dev->watchdog_timeo = TX_TIMEOUT; + /* MTU range: 68 - 8191 */ + dev->min_mtu = ETH_MIN_MTU; + dev->max_mtu = 8191; + pci_set_drvdata(pdev, dev); i = register_netdev(dev); @@ -713,8 +717,6 @@ err_out_netdev: static int change_mtu(struct net_device *dev, int new_mtu) { - if ((new_mtu < 68) || (new_mtu > 8191)) /* Set by RxDMAFrameLen */ - return -EINVAL; if (netif_running(dev)) return -EBUSY; dev->mtu = new_mtu; diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 4b4f5bc0e279..409210413f5d 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -1338,7 +1338,10 @@ static int gfar_probe(struct platform_device *ofdev) /* Fill in the dev structure */ dev->watchdog_timeo = TX_TIMEOUT; + /* MTU range: 50 - 9586 */ dev->mtu = 1500; + dev->min_mtu = 50; + dev->max_mtu = GFAR_JUMBO_FRAME_SIZE - ETH_HLEN; dev->netdev_ops = &gfar_netdev_ops; dev->ethtool_ops = &gfar_ethtool_ops; @@ -2592,12 +2595,6 @@ static int gfar_set_mac_address(struct net_device *dev) static int gfar_change_mtu(struct net_device *dev, int new_mtu) { struct gfar_private *priv = netdev_priv(dev); - int frame_size = new_mtu + ETH_HLEN; - - if ((frame_size < 64) || (frame_size > GFAR_JUMBO_FRAME_SIZE)) { - netif_err(priv, drv, dev, "Invalid MTU setting\n"); - return -EINVAL; - } while (test_and_set_bit_lock(GFAR_RESETTING, &priv->state)) cpu_relax(); diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c index 22e141005cd9..d8e99416ab24 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c @@ -446,8 +446,7 @@ int hns_mac_set_mtu(struct hns_mac_cb *mac_cb, u32 new_mtu) if (mac_cb->mac_type == HNAE_PORT_DEBUG) max_frm = MAC_MAX_MTU_DBG; - if ((new_mtu < MAC_MIN_MTU) || (new_frm > max_frm) || - (new_frm > HNS_RCB_RING_MAX_BD_PER_PKT * buf_size)) + if (new_frm > HNS_RCB_RING_MAX_BD_PER_PKT * buf_size) return -EINVAL; if (!drv->config_max_frame_length) diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c index 059aaeda46b1..a7208673116c 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c @@ -22,6 +22,7 @@ #include "hnae.h" #include "hns_enet.h" +#include "hns_dsaf_mac.h" #define NIC_MAX_Q_PER_VF 16 #define HNS_NIC_TX_TIMEOUT (5 * HZ) @@ -1405,10 +1406,6 @@ static int hns_nic_change_mtu(struct net_device *ndev, int new_mtu) struct hnae_handle *h = priv->ae_handle; int ret; - /* MTU < 68 is an error and causes problems on some kernels */ - if (new_mtu < 68) - return -EINVAL; - if (!h->dev->ops->set_mtu) return -ENOTSUPP; @@ -1953,14 +1950,20 @@ static int hns_nic_dev_probe(struct platform_device *pdev) NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM; ndev->vlan_features |= NETIF_F_SG | NETIF_F_GSO | NETIF_F_GRO; + /* MTU range: 68 - 9578 (v1) or 9706 (v2) */ + ndev->min_mtu = MAC_MIN_MTU; switch (priv->enet_ver) { case AE_VERSION_2: ndev->features |= NETIF_F_TSO | NETIF_F_TSO6; ndev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM | NETIF_F_SG | NETIF_F_GSO | NETIF_F_GRO | NETIF_F_TSO | NETIF_F_TSO6; + ndev->max_mtu = MAC_MAX_MTU_V2 - + (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN); break; default: + ndev->max_mtu = MAC_MAX_MTU - + (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN); break; } diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c index 54efa9a5167b..e9719ba450d7 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_main.c +++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c @@ -1981,14 +1981,6 @@ out: ehea_update_bcmc_registrations(); } -static int ehea_change_mtu(struct net_device *dev, int new_mtu) -{ - if ((new_mtu < 68) || (new_mtu > EHEA_MAX_PACKET_SIZE)) - return -EINVAL; - dev->mtu = new_mtu; - return 0; -} - static void xmit_common(struct sk_buff *skb, struct ehea_swqe *swqe) { swqe->tx_control |= EHEA_SWQE_IMM_DATA_PRESENT | EHEA_SWQE_CRC; @@ -2968,7 +2960,6 @@ static const struct net_device_ops ehea_netdev_ops = { .ndo_set_mac_address = ehea_set_mac_addr, .ndo_validate_addr = eth_validate_addr, .ndo_set_rx_mode = ehea_set_multicast_list, - .ndo_change_mtu = ehea_change_mtu, .ndo_vlan_rx_add_vid = ehea_vlan_rx_add_vid, .ndo_vlan_rx_kill_vid = ehea_vlan_rx_kill_vid, .ndo_tx_timeout = ehea_tx_watchdog, @@ -3041,6 +3032,10 @@ static struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter, NETIF_F_IP_CSUM; dev->watchdog_timeo = EHEA_WATCH_DOG_TIMEOUT; + /* MTU range: 68 - 9022 */ + dev->min_mtu = ETH_MIN_MTU; + dev->max_mtu = EHEA_MAX_PACKET_SIZE; + INIT_WORK(&port->reset_task, ehea_reset_port); INIT_DELAYED_WORK(&port->stats_work, ehea_update_stats); diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c index 5d804a544674..52a69c925965 100644 --- a/drivers/net/ethernet/ibm/emac/core.c +++ b/drivers/net/ethernet/ibm/emac/core.c @@ -1099,9 +1099,6 @@ static int emac_change_mtu(struct net_device *ndev, int new_mtu) struct emac_instance *dev = netdev_priv(ndev); int ret = 0; - if (new_mtu < EMAC_MIN_MTU || new_mtu > dev->max_mtu) - return -EINVAL; - DBG(dev, "change_mtu(%d)" NL, new_mtu); if (netif_running(ndev)) { @@ -2564,7 +2561,7 @@ static int emac_init_config(struct emac_instance *dev) if (emac_read_uint_prop(np, "cell-index", &dev->cell_index, 1)) return -ENXIO; if (emac_read_uint_prop(np, "max-frame-size", &dev->max_mtu, 0)) - dev->max_mtu = 1500; + dev->max_mtu = ETH_DATA_LEN; if (emac_read_uint_prop(np, "rx-fifo-size", &dev->rx_fifo_size, 0)) dev->rx_fifo_size = 2048; if (emac_read_uint_prop(np, "tx-fifo-size", &dev->tx_fifo_size, 0)) @@ -2890,6 +2887,10 @@ static int emac_probe(struct platform_device *ofdev) ndev->netdev_ops = &emac_netdev_ops; ndev->ethtool_ops = &emac_ethtool_ops; + /* MTU range: 46 - 1500 or whatever is in OF */ + ndev->min_mtu = EMAC_MIN_MTU; + ndev->max_mtu = dev->max_mtu; + netif_carrier_off(ndev); err = register_netdev(ndev); diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c index 068789e694c9..25c6dfd500b4 100644 --- a/drivers/net/ethernet/intel/e100.c +++ b/drivers/net/ethernet/intel/e100.c @@ -2286,14 +2286,6 @@ static int e100_set_mac_address(struct net_device *netdev, void *p) return 0; } -static int e100_change_mtu(struct net_device *netdev, int new_mtu) -{ - if (new_mtu < ETH_ZLEN || new_mtu > ETH_DATA_LEN) - return -EINVAL; - netdev->mtu = new_mtu; - return 0; -} - static int e100_asf(struct nic *nic) { /* ASF can be enabled from eeprom */ @@ -2834,7 +2826,6 @@ static const struct net_device_ops e100_netdev_ops = { .ndo_validate_addr = eth_validate_addr, .ndo_set_rx_mode = e100_set_multicast_list, .ndo_set_mac_address = e100_set_mac_address, - .ndo_change_mtu = e100_change_mtu, .ndo_do_ioctl = e100_do_ioctl, .ndo_tx_timeout = e100_tx_timeout, #ifdef CONFIG_NET_POLL_CONTROLLER diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index f42129d09e2c..33076fa98002 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -1085,6 +1085,10 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) hw->subsystem_vendor_id != PCI_VENDOR_ID_VMWARE) netdev->priv_flags |= IFF_UNICAST_FLT; + /* MTU range: 46 - 16110 */ + netdev->min_mtu = ETH_ZLEN - ETH_HLEN; + netdev->max_mtu = MAX_JUMBO_FRAME_SIZE - (ETH_HLEN + ETH_FCS_LEN); + adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw); /* initialize eeprom parameters */ @@ -3549,13 +3553,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE; - - if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) || - (max_frame > MAX_JUMBO_FRAME_SIZE)) { - e_err(probe, "Invalid MTU setting\n"); - return -EINVAL; - } + int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; /* Adapter-specific max frame size limits. */ switch (hw->mac_type) { diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 7017281ba2dc..8759d9236930 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -5974,19 +5974,12 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) int max_frame = new_mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; /* Jumbo frame support */ - if ((max_frame > (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)) && + if ((new_mtu > ETH_DATA_LEN) && !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) { e_err("Jumbo Frames not supported.\n"); return -EINVAL; } - /* Supported frame sizes */ - if ((new_mtu < (VLAN_ETH_ZLEN + ETH_FCS_LEN)) || - (max_frame > adapter->max_hw_frame_size)) { - e_err("Unsupported MTU setting\n"); - return -EINVAL; - } - /* Jumbo frame workaround on 82579 and newer requires CRC be stripped */ if ((adapter->hw.mac.type >= e1000_pch2lan) && !(adapter->flags2 & FLAG2_CRC_STRIPPING) && @@ -7187,6 +7180,11 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) netdev->vlan_features |= NETIF_F_HIGHDMA; } + /* MTU range: 68 - max_hw_frame_size */ + netdev->min_mtu = ETH_MIN_MTU; + netdev->max_mtu = adapter->max_hw_frame_size - + (VLAN_ETH_HLEN + ETH_FCS_LEN); + if (e1000e_enable_mng_pass_thru(&adapter->hw)) adapter->flags |= FLAG_MNG_PT_ENABLED; diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c index 05629381be6b..bc5ef6eb3dd6 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c @@ -706,16 +706,6 @@ static netdev_tx_t fm10k_xmit_frame(struct sk_buff *skb, struct net_device *dev) return err; } -static int fm10k_change_mtu(struct net_device *dev, int new_mtu) -{ - if (new_mtu < 68 || new_mtu > FM10K_MAX_JUMBO_FRAME_SIZE) - return -EINVAL; - - dev->mtu = new_mtu; - - return 0; -} - /** * fm10k_tx_timeout - Respond to a Tx Hang * @netdev: network interface device structure @@ -1405,7 +1395,6 @@ static const struct net_device_ops fm10k_netdev_ops = { .ndo_validate_addr = eth_validate_addr, .ndo_start_xmit = fm10k_xmit_frame, .ndo_set_mac_address = fm10k_set_mac, - .ndo_change_mtu = fm10k_change_mtu, .ndo_tx_timeout = fm10k_tx_timeout, .ndo_vlan_rx_add_vid = fm10k_vlan_rx_add_vid, .ndo_vlan_rx_kill_vid = fm10k_vlan_rx_kill_vid, @@ -1490,5 +1479,9 @@ struct net_device *fm10k_alloc_netdev(const struct fm10k_info *info) dev->hw_features |= hw_features; + /* MTU range: 68 - 15342 */ + dev->min_mtu = ETH_MIN_MTU; + dev->max_mtu = FM10K_MAX_JUMBO_FRAME_SIZE; + return dev; } diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index ac1faee2a5b8..83edbe8e3618 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -2239,13 +2239,8 @@ static void i40e_sync_filters_subtask(struct i40e_pf *pf) static int i40e_change_mtu(struct net_device *netdev, int new_mtu) { struct i40e_netdev_priv *np = netdev_priv(netdev); - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; struct i40e_vsi *vsi = np->vsi; - /* MTU < 68 is an error and causes problems on some kernels */ - if ((new_mtu < 68) || (max_frame > I40E_MAX_RXBUFFER)) - return -EINVAL; - netdev_info(netdev, "changing MTU from %d to %d\n", netdev->mtu, new_mtu); netdev->mtu = new_mtu; @@ -9220,6 +9215,11 @@ static int i40e_config_netdev(struct i40e_vsi *vsi) i40e_fcoe_config_netdev(netdev, vsi); #endif + /* MTU range: 68 - 9706 */ + netdev->min_mtu = ETH_MIN_MTU; + netdev->max_mtu = I40E_MAX_RXBUFFER - + (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN); + return 0; } diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c index 14372810fc27..777eb29e4ff7 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c +++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c @@ -2133,10 +2133,6 @@ static struct net_device_stats *i40evf_get_stats(struct net_device *netdev) static int i40evf_change_mtu(struct net_device *netdev, int new_mtu) { struct i40evf_adapter *adapter = netdev_priv(netdev); - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; - - if ((new_mtu < 68) || (max_frame > I40E_MAX_RXBUFFER)) - return -EINVAL; netdev->mtu = new_mtu; adapter->flags |= I40EVF_FLAG_RESET_NEEDED; @@ -2424,6 +2420,10 @@ static void i40evf_init_task(struct work_struct *work) i40evf_set_ethtool_ops(netdev); netdev->watchdog_timeo = 5 * HZ; + /* MTU range: 68 - 9710 */ + netdev->min_mtu = ETH_MIN_MTU; + netdev->max_mtu = I40E_MAX_RXBUFFER - (ETH_HLEN + ETH_FCS_LEN); + if (!is_valid_ether_addr(adapter->hw.mac.addr)) { dev_info(&pdev->dev, "Invalid MAC address %pM, using random\n", adapter->hw.mac.addr); diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h index 2688180a7acd..8aee314332a8 100644 --- a/drivers/net/ethernet/intel/igb/e1000_defines.h +++ b/drivers/net/ethernet/intel/igb/e1000_defines.h @@ -357,7 +357,8 @@ #define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */ /* As per the EAS the maximum supported size is 9.5KB (9728 bytes) */ -#define MAX_JUMBO_FRAME_SIZE 0x2600 +#define MAX_JUMBO_FRAME_SIZE 0x2600 +#define MAX_STD_JUMBO_FRAME_SIZE 9216 /* PBA constants */ #define E1000_PBA_34K 0x0022 diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index edc9a6ac5169..4feca69e5833 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -2468,6 +2468,10 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) netdev->priv_flags |= IFF_UNICAST_FLT; + /* MTU range: 68 - 9216 */ + netdev->min_mtu = ETH_MIN_MTU; + netdev->max_mtu = MAX_STD_JUMBO_FRAME_SIZE; + adapter->en_mng_pt = igb_enable_mng_pass_thru(hw); /* before reading the NVM, reset the controller to put the device in a @@ -5408,17 +5412,6 @@ static int igb_change_mtu(struct net_device *netdev, int new_mtu) struct pci_dev *pdev = adapter->pdev; int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; - if ((new_mtu < 68) || (max_frame > MAX_JUMBO_FRAME_SIZE)) { - dev_err(&pdev->dev, "Invalid MTU setting\n"); - return -EINVAL; - } - -#define MAX_STD_JUMBO_FRAME_SIZE 9238 - if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) { - dev_err(&pdev->dev, "MTU > 9216 not supported.\n"); - return -EINVAL; - } - /* adjust max frame to be at least the size of a standard frame */ if (max_frame < (ETH_FRAME_LEN + ETH_FCS_LEN)) max_frame = ETH_FRAME_LEN + ETH_FCS_LEN; diff --git a/drivers/net/ethernet/intel/igbvf/defines.h b/drivers/net/ethernet/intel/igbvf/defines.h index ee1ef08d7fc4..f1789d192e24 100644 --- a/drivers/net/ethernet/intel/igbvf/defines.h +++ b/drivers/net/ethernet/intel/igbvf/defines.h @@ -85,7 +85,8 @@ #define E1000_TXD_CMD_DEXT 0x20000000 /* Desc extension (0 = legacy) */ #define E1000_TXD_STAT_DD 0x00000001 /* Desc Done */ -#define MAX_JUMBO_FRAME_SIZE 0x3F00 +#define MAX_JUMBO_FRAME_SIZE 0x3F00 +#define MAX_STD_JUMBO_FRAME_SIZE 9216 /* 802.1q VLAN Packet Size */ #define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */ diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c index 12bb877df860..810fcf7aa2c6 100644 --- a/drivers/net/ethernet/intel/igbvf/netdev.c +++ b/drivers/net/ethernet/intel/igbvf/netdev.c @@ -2356,16 +2356,6 @@ static int igbvf_change_mtu(struct net_device *netdev, int new_mtu) struct igbvf_adapter *adapter = netdev_priv(netdev); int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; - if (new_mtu < 68 || new_mtu > INT_MAX - ETH_HLEN - ETH_FCS_LEN || - max_frame > MAX_JUMBO_FRAME_SIZE) - return -EINVAL; - -#define MAX_STD_JUMBO_FRAME_SIZE 9234 - if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) { - dev_err(&adapter->pdev->dev, "MTU > 9216 not supported.\n"); - return -EINVAL; - } - while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state)) usleep_range(1000, 2000); /* igbvf_down has a dependency on max_frame_size */ @@ -2786,6 +2776,10 @@ static int igbvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_TX; + /* MTU range: 68 - 9216 */ + netdev->min_mtu = ETH_MIN_MTU; + netdev->max_mtu = MAX_STD_JUMBO_FRAME_SIZE; + /*reset the controller to put the device in a known good state */ err = hw->mac.ops.reset_hw(hw); if (err) { diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c index 31f91459312f..5826b1ddedcf 100644 --- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c +++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c @@ -487,6 +487,10 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) netdev->vlan_features |= NETIF_F_HIGHDMA; } + /* MTU range: 68 - 16114 */ + netdev->min_mtu = ETH_MIN_MTU; + netdev->max_mtu = IXGB_MAX_JUMBO_FRAME_SIZE - ETH_HLEN; + /* make sure the EEPROM is good */ if (!ixgb_validate_eeprom_checksum(&adapter->hw)) { @@ -1619,18 +1623,6 @@ ixgb_change_mtu(struct net_device *netdev, int new_mtu) { struct ixgb_adapter *adapter = netdev_priv(netdev); int max_frame = new_mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH; - int old_max_frame = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH; - - /* MTU < 68 is an error for IPv4 traffic, just don't allow it */ - if ((new_mtu < 68) || - (max_frame > IXGB_MAX_JUMBO_FRAME_SIZE + ENET_FCS_LENGTH)) { - netif_err(adapter, probe, adapter->netdev, - "Invalid MTU setting %d\n", new_mtu); - return -EINVAL; - } - - if (old_max_frame == max_frame) - return 0; if (netif_running(netdev)) ixgb_down(adapter, true); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 784b0b98ab2f..7dfde209b0e0 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -6049,11 +6049,6 @@ static void ixgbe_free_all_rx_resources(struct ixgbe_adapter *adapter) static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu) { struct ixgbe_adapter *adapter = netdev_priv(netdev); - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; - - /* MTU < 68 is an error and causes problems on some kernels */ - if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE)) - return -EINVAL; /* * For 82599EB we cannot allow legacy VFs to enable their receive @@ -6062,7 +6057,7 @@ static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu) */ if ((adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) && (adapter->hw.mac.type == ixgbe_mac_82599EB) && - (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN))) + (new_mtu > ETH_DATA_LEN)) e_warn(probe, "Setting MTU > 1500 will disable legacy VFs\n"); e_info(probe, "changing MTU from %d to %d\n", netdev->mtu, new_mtu); @@ -9608,6 +9603,10 @@ skip_sriov: netdev->priv_flags |= IFF_UNICAST_FLT; netdev->priv_flags |= IFF_SUPP_NOFCS; + /* MTU range: 68 - 9710 */ + netdev->min_mtu = ETH_MIN_MTU; + netdev->max_mtu = IXGBE_MAX_JUMBO_FRAME_SIZE - (ETH_HLEN + ETH_FCS_LEN); + #ifdef CONFIG_IXGBE_DCB if (adapter->flags & IXGBE_FLAG_DCB_CAPABLE) netdev->dcbnl_ops = &dcbnl_ops; diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index 7eaac3234049..d2775f032f74 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -3742,24 +3742,8 @@ static int ixgbevf_change_mtu(struct net_device *netdev, int new_mtu) struct ixgbevf_adapter *adapter = netdev_priv(netdev); struct ixgbe_hw *hw = &adapter->hw; int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; - int max_possible_frame = MAXIMUM_ETHERNET_VLAN_SIZE; int ret; - switch (adapter->hw.api_version) { - case ixgbe_mbox_api_11: - case ixgbe_mbox_api_12: - max_possible_frame = IXGBE_MAX_JUMBO_FRAME_SIZE; - break; - default: - if (adapter->hw.mac.type != ixgbe_mac_82599_vf) - max_possible_frame = IXGBE_MAX_JUMBO_FRAME_SIZE; - break; - } - - /* MTU < 68 is an error and causes problems on some kernels */ - if ((new_mtu < 68) || (max_frame > max_possible_frame)) - return -EINVAL; - spin_lock_bh(&adapter->mbx_lock); /* notify the PF of our intent to use this size of frame */ ret = hw->mac.ops.set_rlpml(hw, max_frame); @@ -4104,6 +4088,23 @@ static int ixgbevf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) netdev->priv_flags |= IFF_UNICAST_FLT; + /* MTU range: 68 - 1504 or 9710 */ + netdev->min_mtu = ETH_MIN_MTU; + switch (adapter->hw.api_version) { + case ixgbe_mbox_api_11: + case ixgbe_mbox_api_12: + netdev->max_mtu = IXGBE_MAX_JUMBO_FRAME_SIZE - + (ETH_HLEN + ETH_FCS_LEN); + break; + default: + if (adapter->hw.mac.type != ixgbe_mac_82599_vf) + netdev->max_mtu = IXGBE_MAX_JUMBO_FRAME_SIZE - + (ETH_HLEN + ETH_FCS_LEN); + else + netdev->max_mtu = ETH_DATA_LEN + ETH_FCS_LEN; + break; + } + if (IXGBE_REMOVED(hw->hw_addr)) { err = -EIO; goto err_sw_init; diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 5cb07c2017bf..b85819ea8eea 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -3024,29 +3024,6 @@ static void mvneta_stop_dev(struct mvneta_port *pp) mvneta_rx_reset(pp); } -/* Return positive if MTU is valid */ -static int mvneta_check_mtu_valid(struct net_device *dev, int mtu) -{ - if (mtu < 68) { - netdev_err(dev, "cannot change mtu to less than 68\n"); - return -EINVAL; - } - - /* 9676 == 9700 - 20 and rounding to 8 */ - if (mtu > 9676) { - netdev_info(dev, "Illegal MTU value %d, round to 9676\n", mtu); - mtu = 9676; - } - - if (!IS_ALIGNED(MVNETA_RX_PKT_SIZE(mtu), 8)) { - netdev_info(dev, "Illegal MTU value %d, rounding to %d\n", - mtu, ALIGN(MVNETA_RX_PKT_SIZE(mtu), 8)); - mtu = ALIGN(MVNETA_RX_PKT_SIZE(mtu), 8); - } - - return mtu; -} - static void mvneta_percpu_enable(void *arg) { struct mvneta_port *pp = arg; @@ -3067,9 +3044,11 @@ static int mvneta_change_mtu(struct net_device *dev, int mtu) struct mvneta_port *pp = netdev_priv(dev); int ret; - mtu = mvneta_check_mtu_valid(dev, mtu); - if (mtu < 0) - return -EINVAL; + if (!IS_ALIGNED(MVNETA_RX_PKT_SIZE(mtu), 8)) { + netdev_info(dev, "Illegal MTU value %d, rounding to %d\n", + mtu, ALIGN(MVNETA_RX_PKT_SIZE(mtu), 8)); + mtu = ALIGN(MVNETA_RX_PKT_SIZE(mtu), 8); + } dev->mtu = mtu; @@ -4154,6 +4133,11 @@ static int mvneta_probe(struct platform_device *pdev) dev->priv_flags |= IFF_UNICAST_FLT | IFF_LIVE_ADDR_CHANGE; dev->gso_max_segs = MVNETA_MAX_TSO_SEGS; + /* MTU range: 68 - 9676 */ + dev->min_mtu = ETH_MIN_MTU; + /* 9676 == 9700 - 20 and rounding to 8 */ + dev->max_mtu = 9676; + err = register_netdev(dev); if (err < 0) { dev_err(&pdev->dev, "failed to register\n"); diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c index 60227a3452a4..c8bf155cad94 100644 --- a/drivers/net/ethernet/marvell/mvpp2.c +++ b/drivers/net/ethernet/marvell/mvpp2.c @@ -5453,29 +5453,6 @@ static void mvpp2_stop_dev(struct mvpp2_port *port) phy_stop(ndev->phydev); } -/* Return positive if MTU is valid */ -static inline int mvpp2_check_mtu_valid(struct net_device *dev, int mtu) -{ - if (mtu < 68) { - netdev_err(dev, "cannot change mtu to less than 68\n"); - return -EINVAL; - } - - /* 9676 == 9700 - 20 and rounding to 8 */ - if (mtu > 9676) { - netdev_info(dev, "illegal MTU value %d, round to 9676\n", mtu); - mtu = 9676; - } - - if (!IS_ALIGNED(MVPP2_RX_PKT_SIZE(mtu), 8)) { - netdev_info(dev, "illegal MTU value %d, round to %d\n", mtu, - ALIGN(MVPP2_RX_PKT_SIZE(mtu), 8)); - mtu = ALIGN(MVPP2_RX_PKT_SIZE(mtu), 8); - } - - return mtu; -} - static int mvpp2_check_ringparam_valid(struct net_device *dev, struct ethtool_ringparam *ring) { @@ -5717,10 +5694,10 @@ static int mvpp2_change_mtu(struct net_device *dev, int mtu) struct mvpp2_port *port = netdev_priv(dev); int err; - mtu = mvpp2_check_mtu_valid(dev, mtu); - if (mtu < 0) { - err = mtu; - goto error; + if (!IS_ALIGNED(MVPP2_RX_PKT_SIZE(mtu), 8)) { + netdev_info(dev, "illegal MTU value %d, round to %d\n", mtu, + ALIGN(MVPP2_RX_PKT_SIZE(mtu), 8)); + mtu = ALIGN(MVPP2_RX_PKT_SIZE(mtu), 8); } if (!netif_running(dev)) { @@ -6212,6 +6189,11 @@ static int mvpp2_port_probe(struct platform_device *pdev, dev->hw_features |= features | NETIF_F_RXCSUM | NETIF_F_GRO; dev->vlan_features |= features; + /* MTU range: 68 - 9676 */ + dev->min_mtu = ETH_MIN_MTU; + /* 9676 == 9700 - 20 and rounding to 8 */ + dev->max_mtu = 9676; + err = register_netdev(dev); if (err < 0) { dev_err(&pdev->dev, "failed to register netdev\n"); diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c index 5d5000c8edf1..b78a838f306c 100644 --- a/drivers/net/ethernet/marvell/pxa168_eth.c +++ b/drivers/net/ethernet/marvell/pxa168_eth.c @@ -1209,9 +1209,6 @@ static int pxa168_eth_change_mtu(struct net_device *dev, int mtu) int retval; struct pxa168_eth_private *pep = netdev_priv(dev); - if ((mtu > 9500) || (mtu < 68)) - return -EINVAL; - dev->mtu = mtu; retval = set_port_config_ext(pep); @@ -1459,6 +1456,10 @@ static int pxa168_eth_probe(struct platform_device *pdev) dev->base_addr = 0; dev->ethtool_ops = &pxa168_ethtool_ops; + /* MTU range: 68 - 9500 */ + dev->min_mtu = ETH_MIN_MTU; + dev->max_mtu = 9500; + INIT_WORK(&pep->tx_timeout_task, pxa168_eth_tx_timeout_task); if (pdev->dev.of_node) diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c index 7173836fe361..9c4b722c3fdd 100644 --- a/drivers/net/ethernet/marvell/skge.c +++ b/drivers/net/ethernet/marvell/skge.c @@ -2900,9 +2900,6 @@ static int skge_change_mtu(struct net_device *dev, int new_mtu) { int err; - if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU) - return -EINVAL; - if (!netif_running(dev)) { dev->mtu = new_mtu; return 0; @@ -3857,6 +3854,10 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port, dev->watchdog_timeo = TX_WATCHDOG; dev->irq = hw->pdev->irq; + /* MTU range: 60 - 9000 */ + dev->min_mtu = ETH_ZLEN; + dev->max_mtu = ETH_JUMBO_MTU; + if (highmem) dev->features |= NETIF_F_HIGHDMA; diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index f05ea56dcff2..aa60f4dcddd8 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -2398,16 +2398,6 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) u16 ctl, mode; u32 imask; - /* MTU size outside the spec */ - if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU) - return -EINVAL; - - /* MTU > 1500 on yukon FE and FE+ not allowed */ - if (new_mtu > ETH_DATA_LEN && - (hw->chip_id == CHIP_ID_YUKON_FE || - hw->chip_id == CHIP_ID_YUKON_FE_P)) - return -EINVAL; - if (!netif_running(dev)) { dev->mtu = new_mtu; netdev_update_features(dev); @@ -4808,6 +4798,14 @@ static struct net_device *sky2_init_netdev(struct sky2_hw *hw, unsigned port, dev->features |= dev->hw_features; + /* MTU range: 60 - 1500 or 9000 */ + dev->min_mtu = ETH_ZLEN; + if (hw->chip_id == CHIP_ID_YUKON_FE || + hw->chip_id == CHIP_ID_YUKON_FE_P) + dev->max_mtu = ETH_DATA_LEN; + else + dev->max_mtu = ETH_JUMBO_MTU; + /* try to get mac address in the following order: * 1) from device tree data * 2) from internal registers set by bootloader diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 7e703bed7b82..bf35ac4c1c61 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -2205,10 +2205,6 @@ static int mlx4_en_change_mtu(struct net_device *dev, int new_mtu) en_dbg(DRV, priv, "Change MTU called - current:%d new:%d\n", dev->mtu, new_mtu); - if ((new_mtu < MLX4_EN_MIN_MTU) || (new_mtu > priv->max_mtu)) { - en_err(priv, "Bad MTU size:%d.\n", new_mtu); - return -EPERM; - } if (priv->xdp_ring_num && MLX4_EN_EFF_MTU(new_mtu) > FRAG_SZ0) { en_err(priv, "MTU size:%d requires frags but XDP running\n", new_mtu); @@ -3288,6 +3284,10 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, dev->gso_partial_features = NETIF_F_GSO_UDP_TUNNEL_CSUM; } + /* MTU range: 46 - hw-specific max */ + dev->min_mtu = MLX4_EN_MIN_MTU; + dev->max_mtu = priv->max_mtu; + mdev->pndev[port] = dev; mdev->upper[port] = NULL; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 7eaf38020a8f..03183eba7003 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -2851,31 +2851,13 @@ static int mlx5e_set_features(struct net_device *netdev, return err ? -EINVAL : 0; } -#define MXL5_HW_MIN_MTU 64 -#define MXL5E_MIN_MTU (MXL5_HW_MIN_MTU + ETH_FCS_LEN) - static int mlx5e_change_mtu(struct net_device *netdev, int new_mtu) { struct mlx5e_priv *priv = netdev_priv(netdev); - struct mlx5_core_dev *mdev = priv->mdev; bool was_opened; - u16 max_mtu; - u16 min_mtu; int err = 0; bool reset; - mlx5_query_port_max_mtu(mdev, &max_mtu, 1); - - max_mtu = MLX5E_HW2SW_MTU(max_mtu); - min_mtu = MLX5E_HW2SW_MTU(MXL5E_MIN_MTU); - - if (new_mtu > max_mtu || new_mtu < min_mtu) { - netdev_err(netdev, - "%s: Bad MTU (%d), valid range is: [%d..%d]\n", - __func__, new_mtu, min_mtu, max_mtu); - return -EINVAL; - } - mutex_lock(&priv->state_lock); reset = !priv->params.lro_en && @@ -3835,6 +3817,7 @@ int mlx5e_attach_netdev(struct mlx5_core_dev *mdev, struct net_device *netdev) { const struct mlx5e_profile *profile; struct mlx5e_priv *priv; + u16 max_mtu; int err; priv = netdev_priv(netdev); @@ -3865,6 +3848,11 @@ int mlx5e_attach_netdev(struct mlx5_core_dev *mdev, struct net_device *netdev) mlx5e_init_l2_addr(priv); + /* MTU range: 68 - hw-specific max */ + netdev->min_mtu = ETH_MIN_MTU; + mlx5_query_port_max_mtu(priv->mdev, &max_mtu, 1); + netdev->max_mtu = MLX5E_HW2SW_MTU(max_mtu); + mlx5e_set_dev_port_mtu(netdev); if (profile->enable) diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c index 280e761d3a97..97f6ef1fa7d0 100644 --- a/drivers/net/ethernet/micrel/ksz884x.c +++ b/drivers/net/ethernet/micrel/ksz884x.c @@ -5807,24 +5807,19 @@ static int netdev_change_mtu(struct net_device *dev, int new_mtu) if (hw->dev_count > 1) if (dev != hw_priv->dev) return 0; - if (new_mtu < 60) - return -EINVAL; - if (dev->mtu != new_mtu) { - hw_mtu = new_mtu + ETHERNET_HEADER_SIZE + 4; - if (hw_mtu > MAX_RX_BUF_SIZE) - return -EINVAL; - if (hw_mtu > REGULAR_RX_BUF_SIZE) { - hw->features |= RX_HUGE_FRAME; - hw_mtu = MAX_RX_BUF_SIZE; - } else { - hw->features &= ~RX_HUGE_FRAME; - hw_mtu = REGULAR_RX_BUF_SIZE; - } - hw_mtu = (hw_mtu + 3) & ~3; - hw_priv->mtu = hw_mtu; - dev->mtu = new_mtu; + hw_mtu = new_mtu + ETHERNET_HEADER_SIZE + 4; + if (hw_mtu > REGULAR_RX_BUF_SIZE) { + hw->features |= RX_HUGE_FRAME; + hw_mtu = MAX_RX_BUF_SIZE; + } else { + hw->features &= ~RX_HUGE_FRAME; + hw_mtu = REGULAR_RX_BUF_SIZE; } + hw_mtu = (hw_mtu + 3) & ~3; + hw_priv->mtu = hw_mtu; + dev->mtu = new_mtu; + return 0; } @@ -7099,6 +7094,12 @@ static int pcidev_init(struct pci_dev *pdev, const struct pci_device_id *id) dev->netdev_ops = &netdev_ops; dev->ethtool_ops = &netdev_ethtool_ops; + + /* MTU range: 60 - 1894 */ + dev->min_mtu = ETH_ZLEN; + dev->max_mtu = MAX_RX_BUF_SIZE - + (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN); + if (register_netdev(dev)) goto pcidev_init_reg_err; port_set_power_saving(port, true); diff --git a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c index 6d1a956e3f77..5ae3f175cc23 100644 --- a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c +++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c @@ -3232,10 +3232,6 @@ static int myri10ge_change_mtu(struct net_device *dev, int new_mtu) struct myri10ge_priv *mgp = netdev_priv(dev); int error = 0; - if ((new_mtu < 68) || (ETH_HLEN + new_mtu > MYRI10GE_MAX_ETHER_MTU)) { - netdev_err(dev, "new mtu (%d) is not valid\n", new_mtu); - return -EINVAL; - } netdev_info(dev, "changing mtu from %d to %d\n", dev->mtu, new_mtu); if (mgp->running) { /* if we change the mtu on an active device, we must @@ -4086,13 +4082,19 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) myri10ge_setup_dca(mgp); #endif pci_set_drvdata(pdev, mgp); - if ((myri10ge_initial_mtu + ETH_HLEN) > MYRI10GE_MAX_ETHER_MTU) - myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN; - if ((myri10ge_initial_mtu + ETH_HLEN) < 68) - myri10ge_initial_mtu = 68; - netdev->netdev_ops = &myri10ge_netdev_ops; + /* MTU range: 68 - 9000 */ + netdev->min_mtu = ETH_MIN_MTU; + netdev->max_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN; + + if (myri10ge_initial_mtu > netdev->max_mtu) + myri10ge_initial_mtu = netdev->max_mtu; + if (myri10ge_initial_mtu < netdev->min_mtu) + myri10ge_initial_mtu = netdev->min_mtu; + netdev->mtu = myri10ge_initial_mtu; + + netdev->netdev_ops = &myri10ge_netdev_ops; netdev->hw_features = mgp->features | NETIF_F_RXCSUM; /* fake NETIF_F_HW_VLAN_CTAG_RX for good GRO performance */ diff --git a/drivers/net/ethernet/natsemi/natsemi.c b/drivers/net/ethernet/natsemi/natsemi.c index ed89029ff75b..22b0821c1da0 100644 --- a/drivers/net/ethernet/natsemi/natsemi.c +++ b/drivers/net/ethernet/natsemi/natsemi.c @@ -929,6 +929,10 @@ static int natsemi_probe1(struct pci_dev *pdev, const struct pci_device_id *ent) dev->ethtool_ops = ðtool_ops; + /* MTU range: 64 - 2024 */ + dev->min_mtu = ETH_ZLEN + ETH_FCS_LEN; + dev->max_mtu = NATSEMI_RX_LIMIT - NATSEMI_HEADERS; + if (mtu) dev->mtu = mtu; @@ -2526,9 +2530,6 @@ static void __set_rx_mode(struct net_device *dev) static int natsemi_change_mtu(struct net_device *dev, int new_mtu) { - if (new_mtu < 64 || new_mtu > NATSEMI_RX_LIMIT-NATSEMI_HEADERS) - return -EINVAL; - dev->mtu = new_mtu; /* synchronized against open : rtnl_lock() held by caller */ diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c index eaa37c079a7c..564f682fa4dc 100644 --- a/drivers/net/ethernet/neterion/s2io.c +++ b/drivers/net/ethernet/neterion/s2io.c @@ -6678,11 +6678,6 @@ static int s2io_change_mtu(struct net_device *dev, int new_mtu) struct s2io_nic *sp = netdev_priv(dev); int ret = 0; - if ((new_mtu < MIN_MTU) || (new_mtu > S2IO_JUMBO_SIZE)) { - DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n", dev->name); - return -EPERM; - } - dev->mtu = new_mtu; if (netif_running(dev)) { s2io_stop_all_tx_queue(sp); @@ -8019,6 +8014,10 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) config->mc_start_offset = S2IO_HERC_MC_ADDR_START_OFFSET; } + /* MTU range: 46 - 9600 */ + dev->min_mtu = MIN_MTU; + dev->max_mtu = S2IO_JUMBO_SIZE; + /* store mac addresses from CAM to s2io_nic structure */ do_s2io_store_unicast_mc(sp); diff --git a/drivers/net/ethernet/neterion/vxge/vxge-config.h b/drivers/net/ethernet/neterion/vxge/vxge-config.h index 6ce4412fcc1a..cfa970417f81 100644 --- a/drivers/net/ethernet/neterion/vxge/vxge-config.h +++ b/drivers/net/ethernet/neterion/vxge/vxge-config.h @@ -27,7 +27,7 @@ (((size) - (((u64)adrs) & ((size)-1))) & ((size)-1)) #endif -#define VXGE_HW_MIN_MTU 68 +#define VXGE_HW_MIN_MTU ETH_MIN_MTU #define VXGE_HW_MAX_MTU 9600 #define VXGE_HW_DEFAULT_MTU 1500 diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c index e0993eba5df3..e07b936f64ec 100644 --- a/drivers/net/ethernet/neterion/vxge/vxge-main.c +++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c @@ -3074,11 +3074,6 @@ static int vxge_change_mtu(struct net_device *dev, int new_mtu) vxge_debug_entryexit(vdev->level_trace, "%s:%d", __func__, __LINE__); - if ((new_mtu < VXGE_HW_MIN_MTU) || (new_mtu > VXGE_HW_MAX_MTU)) { - vxge_debug_init(vdev->level_err, - "%s: mtu size is invalid", dev->name); - return -EPERM; - } /* check if device is down already */ if (unlikely(!is_vxge_card_up(vdev))) { @@ -3462,6 +3457,10 @@ static int vxge_device_register(struct __vxge_hw_device *hldev, "%s : using High DMA", __func__); } + /* MTU range: 68 - 9600 */ + ndev->min_mtu = VXGE_HW_MIN_MTU; + ndev->max_mtu = VXGE_HW_MAX_MTU; + ret = register_netdev(ndev); if (ret) { vxge_debug_init(vxge_hw_device_trace_level_get(hldev), diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c index aee3fd2b6538..d365760fa75b 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c @@ -2278,11 +2278,6 @@ static int nfp_net_change_mtu(struct net_device *netdev, int new_mtu) struct nfp_net_rx_ring *tmp_rings; int err; - if (new_mtu < 68 || new_mtu > nn->max_mtu) { - nn_err(nn, "New MTU (%d) is not valid\n", new_mtu); - return -EINVAL; - } - old_mtu = netdev->mtu; old_fl_bufsz = nn->fl_bufsz; new_fl_bufsz = NFP_NET_MAX_PREPEND + ETH_HLEN + VLAN_HLEN * 2 + new_mtu; @@ -2930,6 +2925,11 @@ int nfp_net_netdev_init(struct net_device *netdev) ether_setup(netdev); netdev->netdev_ops = &nfp_net_netdev_ops; netdev->watchdog_timeo = msecs_to_jiffies(5 * 1000); + + /* MTU range: 68 - hw-specific max */ + netdev->min_mtu = ETH_MIN_MTU; + netdev->max_mtu = nn->max_mtu; + netif_carrier_off(netdev); nfp_net_set_ethtool_ops(netdev); diff --git a/drivers/net/ethernet/nvidia/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c index 9b0d7f463ff3..3913f07279d2 100644 --- a/drivers/net/ethernet/nvidia/forcedeth.c +++ b/drivers/net/ethernet/nvidia/forcedeth.c @@ -3008,17 +3008,12 @@ static int nv_change_mtu(struct net_device *dev, int new_mtu) struct fe_priv *np = netdev_priv(dev); int old_mtu; - if (new_mtu < 64 || new_mtu > np->pkt_limit) - return -EINVAL; - old_mtu = dev->mtu; dev->mtu = new_mtu; /* return early if the buffer sizes will not change */ if (old_mtu <= ETH_DATA_LEN && new_mtu <= ETH_DATA_LEN) return 0; - if (old_mtu == new_mtu) - return 0; /* synchronized against open : rtnl_lock() held by caller */ if (netif_running(dev)) { @@ -5719,6 +5714,10 @@ static int nv_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) /* Add loopback capability to the device. */ dev->hw_features |= NETIF_F_LOOPBACK; + /* MTU range: 64 - 1500 or 9100 */ + dev->min_mtu = ETH_ZLEN + ETH_FCS_LEN; + dev->max_mtu = np->pkt_limit; + np->pause_flags = NV_PAUSEFRAME_RX_CAPABLE | NV_PAUSEFRAME_RX_REQ | NV_PAUSEFRAME_AUTONEG; if ((id->driver_data & DEV_HAS_PAUSEFRAME_TX_V1) || (id->driver_data & DEV_HAS_PAUSEFRAME_TX_V2) || diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c index 3cd87a41ac92..d461f419948e 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c @@ -2260,16 +2260,10 @@ static int pch_gbe_set_mac(struct net_device *netdev, void *addr) static int pch_gbe_change_mtu(struct net_device *netdev, int new_mtu) { struct pch_gbe_adapter *adapter = netdev_priv(netdev); - int max_frame; + int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; unsigned long old_rx_buffer_len = adapter->rx_buffer_len; int err; - max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; - if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || - (max_frame > PCH_GBE_MAX_JUMBO_FRAME_SIZE)) { - netdev_err(netdev, "Invalid MTU setting\n"); - return -EINVAL; - } if (max_frame <= PCH_GBE_FRAME_SIZE_2048) adapter->rx_buffer_len = PCH_GBE_FRAME_SIZE_2048; else if (max_frame <= PCH_GBE_FRAME_SIZE_4096) @@ -2633,6 +2627,11 @@ static int pch_gbe_probe(struct pci_dev *pdev, netdev->features = netdev->hw_features; pch_gbe_set_ethtool_ops(netdev); + /* MTU range: 46 - 10300 */ + netdev->min_mtu = ETH_ZLEN - ETH_HLEN; + netdev->max_mtu = PCH_GBE_MAX_JUMBO_FRAME_SIZE - + (ETH_HLEN + ETH_FCS_LEN); + pch_gbe_mac_load_mac_addr(&adapter->hw); pch_gbe_mac_reset_hw(&adapter->hw); diff --git a/drivers/net/ethernet/pasemi/pasemi_mac.c b/drivers/net/ethernet/pasemi/pasemi_mac.c index 2f4a837f0d6a..badfa1d562a4 100644 --- a/drivers/net/ethernet/pasemi/pasemi_mac.c +++ b/drivers/net/ethernet/pasemi/pasemi_mac.c @@ -53,7 +53,7 @@ * - Multiqueue RX/TX */ -#define PE_MIN_MTU 64 +#define PE_MIN_MTU (ETH_ZLEN + ETH_HLEN) #define PE_MAX_MTU 9000 #define PE_DEF_MTU ETH_DATA_LEN @@ -1611,9 +1611,6 @@ static int pasemi_mac_change_mtu(struct net_device *dev, int new_mtu) int running; int ret = 0; - if (new_mtu < PE_MIN_MTU || new_mtu > PE_MAX_MTU) - return -EINVAL; - running = netif_running(dev); if (running) { @@ -1635,7 +1632,7 @@ static int pasemi_mac_change_mtu(struct net_device *dev, int new_mtu) } /* Setup checksum channels if large MTU and none already allocated */ - if (new_mtu > 1500 && !mac->num_cs) { + if (new_mtu > PE_DEF_MTU && !mac->num_cs) { pasemi_mac_setup_csrings(mac); if (!mac->num_cs) { ret = -ENOMEM; @@ -1757,6 +1754,11 @@ pasemi_mac_probe(struct pci_dev *pdev, const struct pci_device_id *ent) dev->netdev_ops = &pasemi_netdev_ops; dev->mtu = PE_DEF_MTU; + + /* MTU range: 64 - 9000 */ + dev->min_mtu = PE_MIN_MTU; + dev->max_mtu = PE_MAX_MTU; + /* 1500 MTU + ETH_HLEN + VLAN_HLEN + 2 64B cachelines */ mac->bufsz = dev->mtu + ETH_HLEN + ETH_FCS_LEN + LOCAL_SKB_ALIGN + 128; diff --git a/drivers/net/ethernet/qlogic/qede/qede.h b/drivers/net/ethernet/qlogic/qede/qede.h index f50e5270ad30..9135b9d37dfa 100644 --- a/drivers/net/ethernet/qlogic/qede/qede.h +++ b/drivers/net/ethernet/qlogic/qede/qede.h @@ -362,8 +362,9 @@ void qede_recycle_rx_bd_ring(struct qede_rx_queue *rxq, struct qede_dev *edev, #define NUM_TX_BDS_MIN 128 #define NUM_TX_BDS_DEF NUM_TX_BDS_MAX -#define QEDE_MIN_PKT_LEN 64 -#define QEDE_RX_HDR_SIZE 256 +#define QEDE_MIN_PKT_LEN 64 +#define QEDE_RX_HDR_SIZE 256 +#define QEDE_MAX_JUMBO_PACKET_SIZE 9600 #define for_each_queue(i) for (i = 0; i < edev->num_queues; i++) #endif /* _QEDE_H_ */ diff --git a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c index 25a9b293ee8f..b7dbb4493a64 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c +++ b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c @@ -723,19 +723,11 @@ static void qede_update_mtu(struct qede_dev *edev, union qede_reload_args *args) } /* Netdevice NDOs */ -#define ETH_MAX_JUMBO_PACKET_SIZE 9600 -#define ETH_MIN_PACKET_SIZE 60 int qede_change_mtu(struct net_device *ndev, int new_mtu) { struct qede_dev *edev = netdev_priv(ndev); union qede_reload_args args; - if ((new_mtu > ETH_MAX_JUMBO_PACKET_SIZE) || - ((new_mtu + ETH_HLEN) < ETH_MIN_PACKET_SIZE)) { - DP_ERR(edev, "Can't support requested MTU size\n"); - return -EINVAL; - } - DP_VERBOSE(edev, (NETIF_MSG_IFUP | NETIF_MSG_IFDOWN), "Configuring MTU size of %d\n", new_mtu); diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index 0e483afc2b87..4f298656bf47 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -2391,6 +2391,10 @@ static void qede_init_ndev(struct qede_dev *edev) ndev->hw_features = hw_features; + /* MTU range: 46 - 9600 */ + ndev->min_mtu = ETH_ZLEN - ETH_HLEN; + ndev->max_mtu = QEDE_MAX_JUMBO_PACKET_SIZE; + /* Set network device HW mac */ ether_addr_copy(edev->ndev->dev_addr, edev->dev_info.common.hw_mac); } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c index 509b596cf1e8..838cc0ceafd8 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c @@ -1024,12 +1024,6 @@ int qlcnic_change_mtu(struct net_device *netdev, int mtu) struct qlcnic_adapter *adapter = netdev_priv(netdev); int rc = 0; - if (mtu < P3P_MIN_MTU || mtu > P3P_MAX_MTU) { - dev_err(&adapter->netdev->dev, "%d bytes < mtu < %d bytes" - " not supported\n", P3P_MAX_MTU, P3P_MIN_MTU); - return -EINVAL; - } - rc = qlcnic_fw_cmd_set_mtu(adapter, mtu); if (!rc) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 3ae3968b0edf..4c0cce962585 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -2342,6 +2342,10 @@ qlcnic_setup_netdev(struct qlcnic_adapter *adapter, struct net_device *netdev, netdev->priv_flags |= IFF_UNICAST_FLT; netdev->irq = adapter->msix_entries[0].vector; + /* MTU range: 68 - 9600 */ + netdev->min_mtu = P3P_MIN_MTU; + netdev->max_mtu = P3P_MAX_MTU; + err = qlcnic_set_real_num_queues(adapter, adapter->drv_tx_rings, adapter->drv_sds_rings); if (err) diff --git a/drivers/net/ethernet/qualcomm/qca_framing.h b/drivers/net/ethernet/qualcomm/qca_framing.h index 5d965959c978..d5e795dcdf47 100644 --- a/drivers/net/ethernet/qualcomm/qca_framing.h +++ b/drivers/net/ethernet/qualcomm/qca_framing.h @@ -43,9 +43,9 @@ /* Frame length is invalid */ #define QCAFRM_INVFRAME (QCAFRM_ERR_BASE - 4) -/* Min/Max Ethernet MTU */ -#define QCAFRM_ETHMINMTU 46 -#define QCAFRM_ETHMAXMTU 1500 +/* Min/Max Ethernet MTU: 46/1500 */ +#define QCAFRM_ETHMINMTU (ETH_ZLEN - ETH_HLEN) +#define QCAFRM_ETHMAXMTU ETH_DATA_LEN /* Min/Max frame lengths */ #define QCAFRM_ETHMINLEN (QCAFRM_ETHMINMTU + ETH_HLEN) diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c index 6e2add979471..513e6c74e199 100644 --- a/drivers/net/ethernet/qualcomm/qca_spi.c +++ b/drivers/net/ethernet/qualcomm/qca_spi.c @@ -780,24 +780,12 @@ qcaspi_netdev_uninit(struct net_device *dev) dev_kfree_skb(qca->rx_skb); } -static int -qcaspi_netdev_change_mtu(struct net_device *dev, int new_mtu) -{ - if ((new_mtu < QCAFRM_ETHMINMTU) || (new_mtu > QCAFRM_ETHMAXMTU)) - return -EINVAL; - - dev->mtu = new_mtu; - - return 0; -} - static const struct net_device_ops qcaspi_netdev_ops = { .ndo_init = qcaspi_netdev_init, .ndo_uninit = qcaspi_netdev_uninit, .ndo_open = qcaspi_netdev_open, .ndo_stop = qcaspi_netdev_close, .ndo_start_xmit = qcaspi_netdev_xmit, - .ndo_change_mtu = qcaspi_netdev_change_mtu, .ndo_set_mac_address = eth_mac_addr, .ndo_tx_timeout = qcaspi_netdev_tx_timeout, .ndo_validate_addr = eth_validate_addr, @@ -814,6 +802,10 @@ qcaspi_netdev_setup(struct net_device *dev) dev->priv_flags &= ~IFF_TX_SKB_SHARING; dev->tx_queue_len = 100; + /* MTU range: 46 - 1500 */ + dev->min_mtu = QCAFRM_ETHMINMTU; + dev->max_mtu = QCAFRM_ETHMAXMTU; + qca = netdev_priv(dev); memset(qca, 0, sizeof(struct qcaspi)); diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index 5297bf77211c..b7c89ebcf4a2 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -1277,10 +1277,6 @@ static int cp_change_mtu(struct net_device *dev, int new_mtu) { struct cp_private *cp = netdev_priv(dev); - /* check for invalid MTU, according to hardware limits */ - if (new_mtu < CP_MIN_MTU || new_mtu > CP_MAX_MTU) - return -EINVAL; - /* if network interface not up, no need for complexity */ if (!netif_running(dev)) { dev->mtu = new_mtu; @@ -2010,6 +2006,10 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO | NETIF_F_HIGHDMA; + /* MTU range: 60 - 4096 */ + dev->min_mtu = CP_MIN_MTU; + dev->max_mtu = CP_MAX_MTU; + rc = register_netdev(dev); if (rc) goto err_out_iomap; diff --git a/drivers/net/ethernet/realtek/8139too.c b/drivers/net/ethernet/realtek/8139too.c index da4c2d8a4173..9bc047ac883b 100644 --- a/drivers/net/ethernet/realtek/8139too.c +++ b/drivers/net/ethernet/realtek/8139too.c @@ -924,19 +924,10 @@ static int rtl8139_set_features(struct net_device *dev, netdev_features_t featur return 0; } -static int rtl8139_change_mtu(struct net_device *dev, int new_mtu) -{ - if (new_mtu < 68 || new_mtu > MAX_ETH_DATA_SIZE) - return -EINVAL; - dev->mtu = new_mtu; - return 0; -} - static const struct net_device_ops rtl8139_netdev_ops = { .ndo_open = rtl8139_open, .ndo_stop = rtl8139_close, .ndo_get_stats64 = rtl8139_get_stats64, - .ndo_change_mtu = rtl8139_change_mtu, .ndo_validate_addr = eth_validate_addr, .ndo_set_mac_address = rtl8139_set_mac_address, .ndo_start_xmit = rtl8139_start_xmit, @@ -1022,6 +1013,10 @@ static int rtl8139_init_one(struct pci_dev *pdev, dev->hw_features |= NETIF_F_RXALL; dev->hw_features |= NETIF_F_RXFCS; + /* MTU range: 68 - 1770 */ + dev->min_mtu = ETH_MIN_MTU; + dev->max_mtu = MAX_ETH_DATA_SIZE; + /* tp zeroed and aligned in alloc_etherdev */ tp = netdev_priv(dev); diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index e55638c7505a..b698ea544bfc 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -6673,10 +6673,6 @@ static int rtl8169_change_mtu(struct net_device *dev, int new_mtu) { struct rtl8169_private *tp = netdev_priv(dev); - if (new_mtu < ETH_ZLEN || - new_mtu > rtl_chip_infos[tp->mac_version].jumbo_max) - return -EINVAL; - if (new_mtu > ETH_DATA_LEN) rtl_hw_jumbo_enable(tp); else @@ -8430,6 +8426,10 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) dev->hw_features |= NETIF_F_RXALL; dev->hw_features |= NETIF_F_RXFCS; + /* MTU range: 60 - hw-specific max */ + dev->min_mtu = ETH_ZLEN; + dev->max_mtu = rtl_chip_infos[chipset].jumbo_max; + tp->hw_start = cfg->hw_start; tp->event_slow = cfg->event_slow; diff --git a/drivers/net/ethernet/rocker/rocker_main.c b/drivers/net/ethernet/rocker/rocker_main.c index 5424fb341613..9b64f369076d 100644 --- a/drivers/net/ethernet/rocker/rocker_main.c +++ b/drivers/net/ethernet/rocker/rocker_main.c @@ -1953,12 +1953,6 @@ static int rocker_port_change_mtu(struct net_device *dev, int new_mtu) int running = netif_running(dev); int err; -#define ROCKER_PORT_MIN_MTU 68 -#define ROCKER_PORT_MAX_MTU 9000 - - if (new_mtu < ROCKER_PORT_MIN_MTU || new_mtu > ROCKER_PORT_MAX_MTU) - return -EINVAL; - if (running) rocker_port_stop(dev); @@ -2536,6 +2530,8 @@ static void rocker_port_dev_addr_init(struct rocker_port *rocker_port) } } +#define ROCKER_PORT_MIN_MTU ETH_MIN_MTU +#define ROCKER_PORT_MAX_MTU 9000 static int rocker_probe_port(struct rocker *rocker, unsigned int port_number) { const struct pci_dev *pdev = rocker->pdev; @@ -2570,6 +2566,10 @@ static int rocker_probe_port(struct rocker *rocker, unsigned int port_number) dev->features |= NETIF_F_NETNS_LOCAL | NETIF_F_SG; + /* MTU range: 68 - 9000 */ + dev->min_mtu = ROCKER_PORT_MIN_MTU; + dev->max_mtu = ROCKER_PORT_MAX_MTU; + err = rocker_world_port_pre_init(rocker_port); if (err) { dev_err(&pdev->dev, "port world pre-init failed\n"); diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c index ea44a2456ce1..5dbe40640da6 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c @@ -1820,19 +1820,6 @@ static int sxgbe_set_features(struct net_device *dev, */ static int sxgbe_change_mtu(struct net_device *dev, int new_mtu) { - /* RFC 791, page 25, "Every internet module must be able to forward - * a datagram of 68 octets without further fragmentation." - */ - if (new_mtu < MIN_MTU || (new_mtu > MAX_MTU)) { - netdev_err(dev, "invalid MTU, MTU should be in between %d and %d\n", - MIN_MTU, MAX_MTU); - return -EINVAL; - } - - /* Return if the buffer sizes will not change */ - if (dev->mtu == new_mtu) - return 0; - dev->mtu = new_mtu; if (!netif_running(dev)) @@ -2144,6 +2131,10 @@ struct sxgbe_priv_data *sxgbe_drv_probe(struct device *device, /* assign filtering support */ ndev->priv_flags |= IFF_UNICAST_FLT; + /* MTU range: 68 - 9000 */ + ndev->min_mtu = MIN_MTU; + ndev->max_mtu = MAX_MTU; + priv->msg_enable = netif_msg_init(debug, default_msg_level); /* Enable TCP segmentation offload for all DMA channels */ diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index da0b80a1917a..fa4a82f4656f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -2715,27 +2715,11 @@ static void stmmac_set_rx_mode(struct net_device *dev) */ static int stmmac_change_mtu(struct net_device *dev, int new_mtu) { - struct stmmac_priv *priv = netdev_priv(dev); - int max_mtu; - if (netif_running(dev)) { pr_err("%s: must be stopped to change its MTU\n", dev->name); return -EBUSY; } - if ((priv->plat->enh_desc) || (priv->synopsys_id >= DWMAC_CORE_4_00)) - max_mtu = JUMBO_LEN; - else - max_mtu = SKB_MAX_HEAD(NET_SKB_PAD + NET_IP_ALIGN); - - if (priv->plat->maxmtu < max_mtu) - max_mtu = priv->plat->maxmtu; - - if ((new_mtu < 46) || (new_mtu > max_mtu)) { - pr_err("%s: invalid MTU, max MTU is: %d\n", dev->name, max_mtu); - return -EINVAL; - } - dev->mtu = new_mtu; netdev_update_features(dev); @@ -3317,6 +3301,15 @@ int stmmac_dvr_probe(struct device *device, #endif priv->msg_enable = netif_msg_init(debug, default_msg_level); + /* MTU range: 46 - hw-specific max */ + ndev->min_mtu = ETH_ZLEN - ETH_HLEN; + if ((priv->plat->enh_desc) || (priv->synopsys_id >= DWMAC_CORE_4_00)) + ndev->max_mtu = JUMBO_LEN; + else + ndev->max_mtu = SKB_MAX_HEAD(NET_SKB_PAD + NET_IP_ALIGN); + if (priv->plat->maxmtu < ndev->max_mtu) + ndev->max_mtu = priv->plat->maxmtu; + if (flow_ctrl) priv->flow_ctrl = FLOW_AUTO; /* RX/TX pause on */ diff --git a/drivers/net/ethernet/sun/cassini.c b/drivers/net/ethernet/sun/cassini.c index 062bce9acde6..e9e5ef241c6f 100644 --- a/drivers/net/ethernet/sun/cassini.c +++ b/drivers/net/ethernet/sun/cassini.c @@ -3863,9 +3863,6 @@ static int cas_change_mtu(struct net_device *dev, int new_mtu) { struct cas *cp = netdev_priv(dev); - if (new_mtu < CAS_MIN_MTU || new_mtu > CAS_MAX_MTU) - return -EINVAL; - dev->mtu = new_mtu; if (!netif_running(dev) || !netif_device_present(dev)) return 0; @@ -5115,6 +5112,10 @@ static int cas_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (pci_using_dac) dev->features |= NETIF_F_HIGHDMA; + /* MTU range: 60 - varies or 9000 */ + dev->min_mtu = CAS_MIN_MTU; + dev->max_mtu = CAS_MAX_MTU; + if (register_netdev(dev)) { dev_err(&pdev->dev, "Cannot register net device, aborting\n"); goto err_out_free_consistent; diff --git a/drivers/net/ethernet/sun/ldmvsw.c b/drivers/net/ethernet/sun/ldmvsw.c index 0ac449acaf5b..335b87660638 100644 --- a/drivers/net/ethernet/sun/ldmvsw.c +++ b/drivers/net/ethernet/sun/ldmvsw.c @@ -139,7 +139,6 @@ static const struct net_device_ops vsw_ops = { .ndo_set_mac_address = sunvnet_set_mac_addr_common, .ndo_validate_addr = eth_validate_addr, .ndo_tx_timeout = sunvnet_tx_timeout_common, - .ndo_change_mtu = sunvnet_change_mtu_common, .ndo_start_xmit = vsw_start_xmit, .ndo_select_queue = vsw_select_queue, #ifdef CONFIG_NET_POLL_CONTROLLER @@ -239,6 +238,10 @@ static struct net_device *vsw_alloc_netdev(u8 hwaddr[], NETIF_F_HW_CSUM | NETIF_F_SG; dev->features = dev->hw_features; + /* MTU range: 68 - 65535 */ + dev->min_mtu = ETH_MIN_MTU; + dev->max_mtu = VNET_MAX_MTU; + SET_NETDEV_DEV(dev, &vdev->dev); return dev; diff --git a/drivers/net/ethernet/sun/niu.c b/drivers/net/ethernet/sun/niu.c index a2371aa14a49..f90d1af6d390 100644 --- a/drivers/net/ethernet/sun/niu.c +++ b/drivers/net/ethernet/sun/niu.c @@ -6754,9 +6754,6 @@ static int niu_change_mtu(struct net_device *dev, int new_mtu) struct niu *np = netdev_priv(dev); int err, orig_jumbo, new_jumbo; - if (new_mtu < 68 || new_mtu > NIU_MAX_MTU) - return -EINVAL; - orig_jumbo = (dev->mtu > ETH_DATA_LEN); new_jumbo = (new_mtu > ETH_DATA_LEN); @@ -9823,6 +9820,10 @@ static int niu_pci_init_one(struct pci_dev *pdev, dev->irq = pdev->irq; + /* MTU range: 68 - 9216 */ + dev->min_mtu = ETH_MIN_MTU; + dev->max_mtu = NIU_MAX_MTU; + niu_assign_netdev_ops(dev); err = niu_get_invariants(np); diff --git a/drivers/net/ethernet/sun/sungem.c b/drivers/net/ethernet/sun/sungem.c index d6ad0fbd054e..66ecf0fcc330 100644 --- a/drivers/net/ethernet/sun/sungem.c +++ b/drivers/net/ethernet/sun/sungem.c @@ -2476,9 +2476,9 @@ static void gem_set_multicast(struct net_device *dev) } /* Jumbo-grams don't seem to work :-( */ -#define GEM_MIN_MTU 68 +#define GEM_MIN_MTU ETH_MIN_MTU #if 1 -#define GEM_MAX_MTU 1500 +#define GEM_MAX_MTU ETH_DATA_LEN #else #define GEM_MAX_MTU 9000 #endif @@ -2487,9 +2487,6 @@ static int gem_change_mtu(struct net_device *dev, int new_mtu) { struct gem *gp = netdev_priv(dev); - if (new_mtu < GEM_MIN_MTU || new_mtu > GEM_MAX_MTU) - return -EINVAL; - dev->mtu = new_mtu; /* We'll just catch it later when the device is up'd or resumed */ @@ -2977,6 +2974,10 @@ static int gem_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (pci_using_dac) dev->features |= NETIF_F_HIGHDMA; + /* MTU range: 68 - 1500 (Jumbo mode is broken) */ + dev->min_mtu = GEM_MIN_MTU; + dev->max_mtu = GEM_MAX_MTU; + /* Register with kernel */ if (register_netdev(dev)) { pr_err("Cannot register net device, aborting\n"); diff --git a/drivers/net/ethernet/sun/sunvnet.c b/drivers/net/ethernet/sun/sunvnet.c index a2f9b47de187..5356a7074796 100644 --- a/drivers/net/ethernet/sun/sunvnet.c +++ b/drivers/net/ethernet/sun/sunvnet.c @@ -159,7 +159,6 @@ static const struct net_device_ops vnet_ops = { .ndo_set_mac_address = sunvnet_set_mac_addr_common, .ndo_validate_addr = eth_validate_addr, .ndo_tx_timeout = sunvnet_tx_timeout_common, - .ndo_change_mtu = sunvnet_change_mtu_common, .ndo_start_xmit = vnet_start_xmit, .ndo_select_queue = vnet_select_queue, #ifdef CONFIG_NET_POLL_CONTROLLER @@ -202,6 +201,10 @@ static struct vnet *vnet_new(const u64 *local_mac, NETIF_F_HW_CSUM | NETIF_F_SG; dev->features = dev->hw_features; + /* MTU range: 68 - 65535 */ + dev->min_mtu = ETH_MIN_MTU; + dev->max_mtu = VNET_MAX_MTU; + SET_NETDEV_DEV(dev, &vdev->dev); err = register_netdev(dev); diff --git a/drivers/net/ethernet/sun/sunvnet_common.c b/drivers/net/ethernet/sun/sunvnet_common.c index 904a5a12a85d..58efe69b7ba7 100644 --- a/drivers/net/ethernet/sun/sunvnet_common.c +++ b/drivers/net/ethernet/sun/sunvnet_common.c @@ -1583,16 +1583,6 @@ void sunvnet_set_rx_mode_common(struct net_device *dev, struct vnet *vp) } EXPORT_SYMBOL_GPL(sunvnet_set_rx_mode_common); -int sunvnet_change_mtu_common(struct net_device *dev, int new_mtu) -{ - if (new_mtu < 68 || new_mtu > 65535) - return -EINVAL; - - dev->mtu = new_mtu; - return 0; -} -EXPORT_SYMBOL_GPL(sunvnet_change_mtu_common); - int sunvnet_set_mac_addr_common(struct net_device *dev, void *p) { return -EINVAL; diff --git a/drivers/net/ethernet/sun/sunvnet_common.h b/drivers/net/ethernet/sun/sunvnet_common.h index bd36528af972..ce5c824128a3 100644 --- a/drivers/net/ethernet/sun/sunvnet_common.h +++ b/drivers/net/ethernet/sun/sunvnet_common.h @@ -15,6 +15,8 @@ #define VNET_MINTSO 2048 /* VIO protocol's minimum TSO len */ #define VNET_MAXTSO 65535 /* VIO protocol's maximum TSO len */ +#define VNET_MAX_MTU 65535 + /* VNET packets are sent in buffers with the first 6 bytes skipped * so that after the ethernet header the IPv4/IPv6 headers are aligned * properly. @@ -125,7 +127,6 @@ int sunvnet_close_common(struct net_device *dev); void sunvnet_set_rx_mode_common(struct net_device *dev, struct vnet *vp); int sunvnet_set_mac_addr_common(struct net_device *dev, void *p); void sunvnet_tx_timeout_common(struct net_device *dev); -int sunvnet_change_mtu_common(struct net_device *dev, int new_mtu); int sunvnet_start_xmit_common(struct sk_buff *skb, struct net_device *dev, struct vnet_port *(*vnet_tx_port) (struct sk_buff *, struct net_device *)); diff --git a/drivers/net/ethernet/tehuti/tehuti.c b/drivers/net/ethernet/tehuti/tehuti.c index 7108c68f16d3..baa3e4a5731c 100644 --- a/drivers/net/ethernet/tehuti/tehuti.c +++ b/drivers/net/ethernet/tehuti/tehuti.c @@ -761,16 +761,6 @@ static int bdx_change_mtu(struct net_device *ndev, int new_mtu) { ENTER; - if (new_mtu == ndev->mtu) - RET(0); - - /* enforce minimum frame size */ - if (new_mtu < ETH_ZLEN) { - netdev_err(ndev, "mtu %d is less then minimal %d\n", - new_mtu, ETH_ZLEN); - RET(-EINVAL); - } - ndev->mtu = new_mtu; if (netif_running(ndev)) { bdx_close(ndev); @@ -2057,6 +2047,10 @@ bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent) #ifdef BDX_LLTX ndev->features |= NETIF_F_LLTX; #endif + /* MTU range: 60 - 16384 */ + ndev->min_mtu = ETH_ZLEN; + ndev->max_mtu = BDX_MAX_MTU; + spin_lock_init(&priv->tx_lock); /*bdx_hw_reset(priv); */ diff --git a/drivers/net/ethernet/tehuti/tehuti.h b/drivers/net/ethernet/tehuti/tehuti.h index 709ebd6e28b4..8e7b4c9abf21 100644 --- a/drivers/net/ethernet/tehuti/tehuti.h +++ b/drivers/net/ethernet/tehuti/tehuti.h @@ -74,6 +74,9 @@ * ifcontig eth1 txqueuelen 3000 - to change it at runtime */ #define BDX_NDEV_TXQ_LEN 3000 +/* Max MTU for Jumbo Frame mode, per tehutinetworks.net Features FAQ is 16k */ +#define BDX_MAX_MTU (16 * 1024) + #define FIFO_SIZE 4096 #define FIFO_EXTRA_SPACE 1024 diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c index 32516661f180..11609d5467fc 100644 --- a/drivers/net/ethernet/ti/netcp_core.c +++ b/drivers/net/ethernet/ti/netcp_core.c @@ -1766,21 +1766,6 @@ out: return (ret == 0) ? 0 : err; } -static int netcp_ndo_change_mtu(struct net_device *ndev, int new_mtu) -{ - struct netcp_intf *netcp = netdev_priv(ndev); - - /* MTU < 68 is an error for IPv4 traffic */ - if ((new_mtu < 68) || - (new_mtu > (NETCP_MAX_FRAME_SIZE - ETH_HLEN - ETH_FCS_LEN))) { - dev_err(netcp->ndev_dev, "Invalid mtu size = %d\n", new_mtu); - return -EINVAL; - } - - ndev->mtu = new_mtu; - return 0; -} - static void netcp_ndo_tx_timeout(struct net_device *ndev) { struct netcp_intf *netcp = netdev_priv(ndev); @@ -1886,7 +1871,6 @@ static const struct net_device_ops netcp_netdev_ops = { .ndo_start_xmit = netcp_ndo_start_xmit, .ndo_set_rx_mode = netcp_set_rx_mode, .ndo_do_ioctl = netcp_ndo_ioctl, - .ndo_change_mtu = netcp_ndo_change_mtu, .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, .ndo_vlan_rx_add_vid = netcp_rx_add_vid, @@ -1923,6 +1907,10 @@ static int netcp_create_interface(struct netcp_device *netcp_device, ndev->hw_features = ndev->features; ndev->vlan_features |= NETIF_F_SG; + /* MTU range: 68 - 9486 */ + ndev->min_mtu = ETH_MIN_MTU; + ndev->max_mtu = NETCP_MAX_FRAME_SIZE - (ETH_HLEN + ETH_FCS_LEN); + netcp = netdev_priv(ndev); spin_lock_init(&netcp->lock); INIT_LIST_HEAD(&netcp->module_head); diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c index 11213a38c795..0aaf975bb347 100644 --- a/drivers/net/ethernet/tile/tilegx.c +++ b/drivers/net/ethernet/tile/tilegx.c @@ -59,6 +59,9 @@ /* Maximum number of packets to handle per "poll". */ #define TILE_NET_WEIGHT 64 +/* Maximum Jumbo Packet MTU */ +#define TILE_JUMBO_MAX_MTU 9000 + /* Number of entries in each iqueue. */ #define IQUEUE_ENTRIES 512 @@ -2101,17 +2104,6 @@ static int tile_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) return -EOPNOTSUPP; } -/* Change the MTU. */ -static int tile_net_change_mtu(struct net_device *dev, int new_mtu) -{ - if (new_mtu < 68) - return -EINVAL; - if (new_mtu > ((jumbo_num != 0) ? 9000 : 1500)) - return -EINVAL; - dev->mtu = new_mtu; - return 0; -} - /* Change the Ethernet address of the NIC. * * The hypervisor driver does not support changing MAC address. However, @@ -2154,7 +2146,6 @@ static const struct net_device_ops tile_net_ops = { .ndo_start_xmit = tile_net_tx, .ndo_select_queue = tile_net_select_queue, .ndo_do_ioctl = tile_net_ioctl, - .ndo_change_mtu = tile_net_change_mtu, .ndo_tx_timeout = tile_net_tx_timeout, .ndo_set_mac_address = tile_net_set_mac_address, #ifdef CONFIG_NET_POLL_CONTROLLER @@ -2174,7 +2165,11 @@ static void tile_net_setup(struct net_device *dev) ether_setup(dev); dev->netdev_ops = &tile_net_ops; dev->watchdog_timeo = TILE_NET_TIMEOUT; - dev->mtu = 1500; + + /* MTU range: 68 - 1500 or 9000 */ + dev->mtu = ETH_DATA_LEN; + dev->min_mtu = ETH_MIN_MTU; + dev->max_mtu = jumbo_num ? TILE_JUMBO_MAX_MTU : ETH_DATA_LEN; features |= NETIF_F_HW_CSUM; features |= NETIF_F_SG; diff --git a/drivers/net/ethernet/tile/tilepro.c b/drivers/net/ethernet/tile/tilepro.c index 4ef605a90247..0a3b7dafa3ba 100644 --- a/drivers/net/ethernet/tile/tilepro.c +++ b/drivers/net/ethernet/tile/tilepro.c @@ -87,7 +87,7 @@ /* This should be 1500 if "jumbo" is not set in LIPP. */ /* This should be at most 10226 (10240 - 14) if "jumbo" is set in LIPP. */ /* ISSUE: This has not been thoroughly tested (except at 1500). */ -#define TILE_NET_MTU 1500 +#define TILE_NET_MTU ETH_DATA_LEN /* HACK: Define this to verify incoming packets. */ /* #define TILE_NET_VERIFY_INGRESS */ @@ -2095,26 +2095,6 @@ static struct rtnl_link_stats64 *tile_net_get_stats64(struct net_device *dev, } -/* - * Change the "mtu". - * - * The "change_mtu" method is usually not needed. - * If you need it, it must be like this. - */ -static int tile_net_change_mtu(struct net_device *dev, int new_mtu) -{ - PDEBUG("tile_net_change_mtu()\n"); - - /* Check ranges. */ - if ((new_mtu < 68) || (new_mtu > 1500)) - return -EINVAL; - - /* Accept the value. */ - dev->mtu = new_mtu; - - return 0; -} - /* * Change the Ethernet Address of the NIC. @@ -2229,7 +2209,6 @@ static const struct net_device_ops tile_net_ops = { .ndo_start_xmit = tile_net_tx, .ndo_do_ioctl = tile_net_ioctl, .ndo_get_stats64 = tile_net_get_stats64, - .ndo_change_mtu = tile_net_change_mtu, .ndo_tx_timeout = tile_net_tx_timeout, .ndo_set_mac_address = tile_net_set_mac_address, #ifdef CONFIG_NET_POLL_CONTROLLER @@ -2252,7 +2231,11 @@ static void tile_net_setup(struct net_device *dev) dev->netdev_ops = &tile_net_ops; dev->watchdog_timeo = TILE_NET_TIMEOUT; dev->tx_queue_len = TILE_NET_TX_QUEUE_LEN; + + /* MTU range: 68 - 1500 */ dev->mtu = TILE_NET_MTU; + dev->min_mtu = ETH_MIN_MTU; + dev->max_mtu = TILE_NET_MTU; features |= NETIF_F_HW_CSUM; features |= NETIF_F_SG; diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.c b/drivers/net/ethernet/toshiba/ps3_gelic_net.c index 272f2b1cb7ad..345316c749e7 100644 --- a/drivers/net/ethernet/toshiba/ps3_gelic_net.c +++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.c @@ -1114,24 +1114,6 @@ static int gelic_net_poll(struct napi_struct *napi, int budget) } return packets_done; } -/** - * gelic_net_change_mtu - changes the MTU of an interface - * @netdev: interface device structure - * @new_mtu: new MTU value - * - * returns 0 on success, <0 on failure - */ -int gelic_net_change_mtu(struct net_device *netdev, int new_mtu) -{ - /* no need to re-alloc skbs or so -- the max mtu is about 2.3k - * and mtu is outbound only anyway */ - if ((new_mtu < GELIC_NET_MIN_MTU) || - (new_mtu > GELIC_NET_MAX_MTU)) { - return -EINVAL; - } - netdev->mtu = new_mtu; - return 0; -} /** * gelic_card_interrupt - event handler for gelic_net @@ -1446,7 +1428,6 @@ static const struct net_device_ops gelic_netdevice_ops = { .ndo_stop = gelic_net_stop, .ndo_start_xmit = gelic_net_xmit, .ndo_set_rx_mode = gelic_net_set_multi, - .ndo_change_mtu = gelic_net_change_mtu, .ndo_tx_timeout = gelic_net_tx_timeout, .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, @@ -1513,6 +1494,10 @@ int gelic_net_setup_netdev(struct net_device *netdev, struct gelic_card *card) netdev->features |= NETIF_F_VLAN_CHALLENGED; } + /* MTU range: 64 - 1518 */ + netdev->min_mtu = GELIC_NET_MIN_MTU; + netdev->max_mtu = GELIC_NET_MAX_MTU; + status = register_netdev(netdev); if (status) { dev_err(ctodev(card), "%s:Couldn't register %s %d\n", diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.h b/drivers/net/ethernet/toshiba/ps3_gelic_net.h index 8505196be9f5..003d0452d9cb 100644 --- a/drivers/net/ethernet/toshiba/ps3_gelic_net.h +++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.h @@ -373,7 +373,6 @@ int gelic_net_stop(struct net_device *netdev); int gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev); void gelic_net_set_multi(struct net_device *netdev); void gelic_net_tx_timeout(struct net_device *netdev); -int gelic_net_change_mtu(struct net_device *netdev, int new_mtu); int gelic_net_setup_netdev(struct net_device *netdev, struct gelic_card *card); /* shared ethtool ops */ diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c b/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c index 446ea580ad42..b3abd02dc949 100644 --- a/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c +++ b/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c @@ -2558,7 +2558,6 @@ static const struct net_device_ops gelic_wl_netdevice_ops = { .ndo_stop = gelic_wl_stop, .ndo_start_xmit = gelic_net_xmit, .ndo_set_rx_mode = gelic_net_set_multi, - .ndo_change_mtu = gelic_net_change_mtu, .ndo_tx_timeout = gelic_net_tx_timeout, .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, diff --git a/drivers/net/ethernet/toshiba/spider_net.c b/drivers/net/ethernet/toshiba/spider_net.c index 36a6e8b54d94..cb341dfe65ad 100644 --- a/drivers/net/ethernet/toshiba/spider_net.c +++ b/drivers/net/ethernet/toshiba/spider_net.c @@ -1279,25 +1279,6 @@ static int spider_net_poll(struct napi_struct *napi, int budget) } /** - * spider_net_change_mtu - changes the MTU of an interface - * @netdev: interface device structure - * @new_mtu: new MTU value - * - * returns 0 on success, <0 on failure - */ -static int -spider_net_change_mtu(struct net_device *netdev, int new_mtu) -{ - /* no need to re-alloc skbs or so -- the max mtu is about 2.3k - * and mtu is outbound only anyway */ - if ( (new_mtu < SPIDER_NET_MIN_MTU ) || - (new_mtu > SPIDER_NET_MAX_MTU) ) - return -EINVAL; - netdev->mtu = new_mtu; - return 0; -} - -/** * spider_net_set_mac - sets the MAC of an interface * @netdev: interface device structure * @ptr: pointer to new MAC address @@ -2229,7 +2210,6 @@ static const struct net_device_ops spider_net_ops = { .ndo_start_xmit = spider_net_xmit, .ndo_set_rx_mode = spider_net_set_multi, .ndo_set_mac_address = spider_net_set_mac, - .ndo_change_mtu = spider_net_change_mtu, .ndo_do_ioctl = spider_net_do_ioctl, .ndo_tx_timeout = spider_net_tx_timeout, .ndo_validate_addr = eth_validate_addr, @@ -2299,6 +2279,10 @@ spider_net_setup_netdev(struct spider_net_card *card) /* some time: NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX | * NETIF_F_HW_VLAN_CTAG_FILTER */ + /* MTU range: 64 - 2294 */ + netdev->min_mtu = SPIDER_NET_MIN_MTU; + netdev->max_mtu = SPIDER_NET_MAX_MTU; + netdev->irq = card->pdev->irq; card->num_rx_ints = 0; card->ignore_rx_ramfull = 0; diff --git a/drivers/net/ethernet/via/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c index 908e72e18ef7..4716e60e2ccb 100644 --- a/drivers/net/ethernet/via/via-velocity.c +++ b/drivers/net/ethernet/via/via-velocity.c @@ -2284,13 +2284,6 @@ static int velocity_change_mtu(struct net_device *dev, int new_mtu) struct velocity_info *vptr = netdev_priv(dev); int ret = 0; - if ((new_mtu < VELOCITY_MIN_MTU) || new_mtu > (VELOCITY_MAX_MTU)) { - VELOCITY_PRT(MSG_LEVEL_ERR, KERN_NOTICE "%s: Invalid MTU.\n", - vptr->netdev->name); - ret = -EINVAL; - goto out_0; - } - if (!netif_running(dev)) { dev->mtu = new_mtu; goto out_0; @@ -2864,6 +2857,10 @@ static int velocity_probe(struct device *dev, int irq, NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_IP_CSUM; + /* MTU range: 64 - 9000 */ + netdev->min_mtu = VELOCITY_MIN_MTU; + netdev->max_mtu = VELOCITY_MAX_MTU; + ret = register_netdev(netdev); if (ret < 0) goto err_iounmap; diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c index d02e3e31ed29..8130dfe89745 100644 --- a/drivers/staging/octeon/ethernet.c +++ b/drivers/staging/octeon/ethernet.c @@ -259,17 +259,6 @@ static int cvm_oct_common_change_mtu(struct net_device *dev, int new_mtu) #endif int mtu_overhead = ETH_HLEN + ETH_FCS_LEN + vlan_bytes; - /* - * Limit the MTU to make sure the ethernet packets are between - * 64 bytes and 65535 bytes. - */ - if ((new_mtu + mtu_overhead < VLAN_ETH_ZLEN) || - (new_mtu + mtu_overhead > OCTEON_MAX_MTU)) { - pr_err("MTU must be between %d and %d.\n", - VLAN_ETH_ZLEN - mtu_overhead, - OCTEON_MAX_MTU - mtu_overhead); - return -EINVAL; - } dev->mtu = new_mtu; if ((interface < 2) && @@ -457,7 +446,7 @@ int cvm_oct_common_init(struct net_device *dev) dev->ethtool_ops = &cvm_oct_ethtool_ops; cvm_oct_set_mac_filter(dev); - dev->netdev_ops->ndo_change_mtu(dev, dev->mtu); + dev_set_mtu(dev, dev->mtu); /* * Zero out stats for port so we won't mistakenly show @@ -685,6 +674,11 @@ static int cvm_oct_probe(struct platform_device *pdev) int fau = FAU_NUM_PACKET_BUFFERS_TO_FREE; int qos; struct device_node *pip; + int mtu_overhead = ETH_HLEN + ETH_FCS_LEN; + +#if IS_ENABLED(CONFIG_VLAN_8021Q) + mtu_overhead += VLAN_HLEN; +#endif octeon_mdiobus_force_mod_depencency(); @@ -783,6 +777,8 @@ static int cvm_oct_probe(struct platform_device *pdev) strcpy(dev->name, "pow%d"); for (qos = 0; qos < 16; qos++) skb_queue_head_init(&priv->tx_free_list[qos]); + dev->min_mtu = VLAN_ETH_ZLEN - mtu_overhead; + dev->max_mtu = OCTEON_MAX_MTU - mtu_overhead; if (register_netdev(dev) < 0) { pr_err("Failed to register ethernet device for POW\n"); @@ -836,6 +832,8 @@ static int cvm_oct_probe(struct platform_device *pdev) for (qos = 0; qos < cvmx_pko_get_num_queues(port); qos++) cvmx_fau_atomic_write32(priv->fau + qos * 4, 0); + dev->min_mtu = VLAN_ETH_ZLEN - mtu_overhead; + dev->max_mtu = OCTEON_MAX_MTU - mtu_overhead; switch (priv->imode) { /* These types don't support ports to IPD/PKO */ |