summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorSricharan R <sricharan@codeaurora.org>2018-06-07 22:57:11 +0530
committerBjorn Andersson <bjorn.andersson@linaro.org>2018-06-18 15:57:58 -0700
commit3a3d4163e0bfde184ffbc54c887f5b1ec9969c90 (patch)
treee2698b62ced956b04486703163a403188f3c1924
parent7d674731f36c2b3f2707baad6c01cce93c754edf (diff)
remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
IPQ8074 has an integrated Hexagon dsp core q6v5 and a wireless lan (Lithium) IP. An mdt type single image format is used for the firmware. So the mdt_load function can be directly used to load the firmware. Also add the relevant resets required for this core. Acked-by: Rob Herring <robh@kernel.org> (bindings) Signed-off-by: Sricharan R <sricharan@codeaurora.org> [bjorn: Rewrote as a separate driver, intead of extending q6v5_pil.c] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-rw-r--r--Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt7
-rw-r--r--drivers/remoteproc/Kconfig15
-rw-r--r--drivers/remoteproc/Makefile1
-rw-r--r--drivers/remoteproc/qcom_q6v5_wcss.c601
4 files changed, 623 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index d90182425450..601dd9f389aa 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -8,6 +8,7 @@ on the Qualcomm Hexagon core.
Value type: <string>
Definition: must be one of:
"qcom,q6v5-pil",
+ "qcom,ipq8074-wcss-pil"
"qcom,msm8916-mss-pil",
"qcom,msm8974-mss-pil"
"qcom,msm8996-mss-pil"
@@ -50,11 +51,15 @@ on the Qualcomm Hexagon core.
Usage: required
Value type: <phandle>
Definition: reference to the reset-controller for the modem sub-system
+ reference to the list of 3 reset-controllers for the
+ wcss sub-system
- reset-names:
Usage: required
Value type: <stringlist>
- Definition: must be "mss_restart"
+ Definition: must be "mss_restart" for the modem sub-system
+ Definition: must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
+ for the wcss syb-system
- cx-supply:
- mss-supply:
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index a6a74bde906a..0dde3753c3a5 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -123,6 +123,21 @@ config QCOM_Q6V5_PIL
Say y here to support the Qualcomm Peripherial Image Loader for the
Hexagon V5 based remote processors.
+config QCOM_Q6V5_WCSS
+ tristate "Qualcomm Hexagon based WCSS Peripheral Image Loader"
+ depends on OF && ARCH_QCOM
+ depends on QCOM_SMEM
+ depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
+ depends on QCOM_SYSMON || QCOM_SYSMON=n
+ select MFD_SYSCON
+ select QCOM_MDT_LOADER
+ select QCOM_Q6V5_COMMON
+ select QCOM_RPROC_COMMON
+ select QCOM_SCM
+ help
+ Say y here to support the Qualcomm Peripheral Image Loader for the
+ Hexagon V5 based WCSS remote processors.
+
config QCOM_SYSMON
tristate "Qualcomm sysmon driver"
depends on RPMSG
diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index 5dd0249cf76a..03332fa7e2ee 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_QCOM_ADSP_PIL) += qcom_adsp_pil.o
obj-$(CONFIG_QCOM_RPROC_COMMON) += qcom_common.o
obj-$(CONFIG_QCOM_Q6V5_COMMON) += qcom_q6v5.o
obj-$(CONFIG_QCOM_Q6V5_PIL) += qcom_q6v5_pil.o
+obj-$(CONFIG_QCOM_Q6V5_WCSS) += qcom_q6v5_wcss.o
obj-$(CONFIG_QCOM_SYSMON) += qcom_sysmon.o
obj-$(CONFIG_QCOM_WCNSS_PIL) += qcom_wcnss_pil.o
qcom_wcnss_pil-y += qcom_wcnss.o
diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c b/drivers/remoteproc/qcom_q6v5_wcss.c
new file mode 100644
index 000000000000..f93e1e4a1cc0
--- /dev/null
+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
@@ -0,0 +1,601 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2018 Linaro Ltd.
+ * Copyright (C) 2014 Sony Mobile Communications AB
+ * Copyright (c) 2012-2018, The Linux Foundation. All rights reserved.
+ */
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/soc/qcom/mdt_loader.h>
+#include "qcom_common.h"
+#include "qcom_q6v5.h"
+
+#define WCSS_CRASH_REASON 421
+
+/* Q6SS Register Offsets */
+#define Q6SS_RESET_REG 0x014
+#define Q6SS_GFMUX_CTL_REG 0x020
+#define Q6SS_PWR_CTL_REG 0x030
+#define Q6SS_MEM_PWR_CTL 0x0B0
+
+/* AXI Halt Register Offsets */
+#define AXI_HALTREQ_REG 0x0
+#define AXI_HALTACK_REG 0x4
+#define AXI_IDLE_REG 0x8
+
+#define HALT_ACK_TIMEOUT_MS 100
+
+/* Q6SS_RESET */
+#define Q6SS_STOP_CORE BIT(0)
+#define Q6SS_CORE_ARES BIT(1)
+#define Q6SS_BUS_ARES_ENABLE BIT(2)
+
+/* Q6SS_GFMUX_CTL */
+#define Q6SS_CLK_ENABLE BIT(1)
+
+/* Q6SS_PWR_CTL */
+#define Q6SS_L2DATA_STBY_N BIT(18)
+#define Q6SS_SLP_RET_N BIT(19)
+#define Q6SS_CLAMP_IO BIT(20)
+#define QDSS_BHS_ON BIT(21)
+
+/* Q6SS parameters */
+#define Q6SS_LDO_BYP BIT(25)
+#define Q6SS_BHS_ON BIT(24)
+#define Q6SS_CLAMP_WL BIT(21)
+#define Q6SS_CLAMP_QMC_MEM BIT(22)
+#define HALT_CHECK_MAX_LOOPS 200
+#define Q6SS_XO_CBCR GENMASK(5, 3)
+
+/* Q6SS config/status registers */
+#define TCSR_GLOBAL_CFG0 0x0
+#define TCSR_GLOBAL_CFG1 0x4
+#define SSCAON_CONFIG 0x8
+#define SSCAON_STATUS 0xc
+#define Q6SS_BHS_STATUS 0x78
+#define Q6SS_RST_EVB 0x10
+
+#define BHS_EN_REST_ACK BIT(0)
+#define SSCAON_ENABLE BIT(13)
+#define SSCAON_BUS_EN BIT(15)
+#define SSCAON_BUS_MUX_MASK GENMASK(18, 16)
+
+#define MEM_BANKS 19
+#define TCSR_WCSS_CLK_MASK 0x1F
+#define TCSR_WCSS_CLK_ENABLE 0x14
+
+struct q6v5_wcss {
+ struct device *dev;
+
+ void __iomem *reg_base;
+ void __iomem *rmb_base;
+
+ struct regmap *halt_map;
+ u32 halt_q6;
+ u32 halt_wcss;
+ u32 halt_nc;
+
+ struct reset_control *wcss_aon_reset;
+ struct reset_control *wcss_reset;
+ struct reset_control *wcss_q6_reset;
+
+ struct qcom_q6v5 q6v5;
+
+ phys_addr_t mem_phys;
+ phys_addr_t mem_reloc;
+ void *mem_region;
+ size_t mem_size;
+};
+
+static int q6v5_wcss_reset(struct q6v5_wcss *wcss)
+{
+ int ret;
+ u32 val;
+ int i;
+
+ /* Assert resets, stop core */
+ val = readl(wcss->reg_base + Q6SS_RESET_REG);
+ val |= Q6SS_CORE_ARES | Q6SS_BUS_ARES_ENABLE | Q6SS_STOP_CORE;
+ writel(val, wcss->reg_base + Q6SS_RESET_REG);
+
+ /* BHS require xo cbcr to be enabled */
+ val = readl(wcss->reg_base + Q6SS_XO_CBCR);
+ val |= 0x1;
+ writel(val, wcss->reg_base + Q6SS_XO_CBCR);
+
+ /* Read CLKOFF bit to go low indicating CLK is enabled */
+ ret = readl_poll_timeout(wcss->reg_base + Q6SS_XO_CBCR,
+ val, !(val & BIT(31)), 1,
+ HALT_CHECK_MAX_LOOPS);
+ if (ret) {
+ dev_err(wcss->dev,
+ "xo cbcr enabling timed out (rc:%d)\n", ret);
+ return ret;
+ }
+ /* Enable power block headswitch and wait for it to stabilize */
+ val = readl(wcss->reg_base + Q6SS_PWR_CTL_REG);
+ val |= Q6SS_BHS_ON;
+ writel(val, wcss->reg_base + Q6SS_PWR_CTL_REG);
+ udelay(1);
+
+ /* Put LDO in bypass mode */
+ val |= Q6SS_LDO_BYP;
+ writel(val, wcss->reg_base + Q6SS_PWR_CTL_REG);
+
+ /* Deassert Q6 compiler memory clamp */
+ val = readl(wcss->reg_base + Q6SS_PWR_CTL_REG);
+ val &= ~Q6SS_CLAMP_QMC_MEM;
+ writel(val, wcss->reg_base + Q6SS_PWR_CTL_REG);
+
+ /* Deassert memory peripheral sleep and L2 memory standby */
+ val |= Q6SS_L2DATA_STBY_N | Q6SS_SLP_RET_N;
+ writel(val, wcss->reg_base + Q6SS_PWR_CTL_REG);
+
+ /* Turn on L1, L2, ETB and JU memories 1 at a time */
+ val = readl(wcss->reg_base + Q6SS_MEM_PWR_CTL);
+ for (i = MEM_BANKS; i >= 0; i--) {
+ val |= BIT(i);
+ writel(val, wcss->reg_base + Q6SS_MEM_PWR_CTL);
+ /*
+ * Read back value to ensure the write is done then
+ * wait for 1us for both memory peripheral and data
+ * array to turn on.
+ */
+ val |= readl(wcss->reg_base + Q6SS_MEM_PWR_CTL);
+ udelay(1);
+ }
+ /* Remove word line clamp */
+ val = readl(wcss->reg_base + Q6SS_PWR_CTL_REG);
+ val &= ~Q6SS_CLAMP_WL;
+ writel(val, wcss->reg_base + Q6SS_PWR_CTL_REG);
+
+ /* Remove IO clamp */
+ val &= ~Q6SS_CLAMP_IO;
+ writel(val, wcss->reg_base + Q6SS_PWR_CTL_REG);
+
+ /* Bring core out of reset */
+ val = readl(wcss->reg_base + Q6SS_RESET_REG);
+ val &= ~Q6SS_CORE_ARES;
+ writel(val, wcss->reg_base + Q6SS_RESET_REG);
+
+ /* Turn on core clock */
+ val = readl(wcss->reg_base + Q6SS_GFMUX_CTL_REG);
+ val |= Q6SS_CLK_ENABLE;
+ writel(val, wcss->reg_base + Q6SS_GFMUX_CTL_REG);
+
+ /* Start core execution */
+ val = readl(wcss->reg_base + Q6SS_RESET_REG);
+ val &= ~Q6SS_STOP_CORE;
+ writel(val, wcss->reg_base + Q6SS_RESET_REG);
+
+ return 0;
+}
+
+static int q6v5_wcss_start(struct rproc *rproc)
+{
+ struct q6v5_wcss *wcss = rproc->priv;
+ int ret;
+
+ qcom_q6v5_prepare(&wcss->q6v5);
+
+ /* Release Q6 and WCSS reset */
+ ret = reset_control_deassert(wcss->wcss_reset);
+ if (ret) {
+ dev_err(wcss->dev, "wcss_reset failed\n");
+ return ret;
+ }
+
+ ret = reset_control_deassert(wcss->wcss_q6_reset);
+ if (ret) {
+ dev_err(wcss->dev, "wcss_q6_reset failed\n");
+ goto wcss_reset;
+ }
+
+ /* Lithium configuration - clock gating and bus arbitration */
+ ret = regmap_update_bits(wcss->halt_map,
+ wcss->halt_nc + TCSR_GLOBAL_CFG0,
+ TCSR_WCSS_CLK_MASK,
+ TCSR_WCSS_CLK_ENABLE);
+ if (ret)
+ goto wcss_q6_reset;
+
+ ret = regmap_update_bits(wcss->halt_map,
+ wcss->halt_nc + TCSR_GLOBAL_CFG1,
+ 1, 0);
+ if (ret)
+ goto wcss_q6_reset;
+
+ /* Write bootaddr to EVB so that Q6WCSS will jump there after reset */
+ writel(rproc->bootaddr >> 4, wcss->reg_base + Q6SS_RST_EVB);
+
+ ret = q6v5_wcss_reset(wcss);
+ if (ret)
+ goto wcss_q6_reset;
+
+ ret = qcom_q6v5_wait_for_start(&wcss->q6v5, 5 * HZ);
+ if (ret == -ETIMEDOUT)
+ dev_err(wcss->dev, "start timed out\n");
+
+ return ret;
+
+wcss_q6_reset:
+ reset_control_assert(wcss->wcss_q6_reset);
+
+wcss_reset:
+ reset_control_assert(wcss->wcss_reset);
+
+ return ret;
+}
+
+static void q6v5_wcss_halt_axi_port(struct q6v5_wcss *wcss,
+ struct regmap *halt_map,
+ u32 offset)
+{
+ unsigned long timeout;
+ unsigned int val;
+ int ret;
+
+ /* Check if we're already idle */
+ ret = regmap_read(halt_map, offset + AXI_IDLE_REG, &val);
+ if (!ret && val)
+ return;
+
+ /* Assert halt request */
+ regmap_write(halt_map, offset + AXI_HALTREQ_REG, 1);
+
+ /* Wait for halt */
+ timeout = jiffies + msecs_to_jiffies(HALT_ACK_TIMEOUT_MS);
+ for (;;) {
+ ret = regmap_read(halt_map, offset + AXI_HALTACK_REG, &val);
+ if (ret || val || time_after(jiffies, timeout))
+ break;
+
+ msleep(1);
+ }
+
+ ret = regmap_read(halt_map, offset + AXI_IDLE_REG, &val);
+ if (ret || !val)
+ dev_err(wcss->dev, "port failed halt\n");
+
+ /* Clear halt request (port will remain halted until reset) */
+ regmap_write(halt_map, offset + AXI_HALTREQ_REG, 0);
+}
+
+static int q6v5_wcss_powerdown(struct q6v5_wcss *wcss)
+{
+ int ret;
+ u32 val;
+
+ /* 1 - Assert WCSS/Q6 HALTREQ */
+ q6v5_wcss_halt_axi_port(wcss, wcss->halt_map, wcss->halt_wcss);
+
+ /* 2 - Enable WCSSAON_CONFIG */
+ val = readl(wcss->rmb_base + SSCAON_CONFIG);
+ val |= SSCAON_ENABLE;
+ writel(val, wcss->rmb_base + SSCAON_CONFIG);
+
+ /* 3 - Set SSCAON_CONFIG */
+ val |= SSCAON_BUS_EN;
+ val &= ~SSCAON_BUS_MUX_MASK;
+ writel(val, wcss->rmb_base + SSCAON_CONFIG);
+
+ /* 4 - SSCAON_CONFIG 1 */
+ val |= BIT(1);
+ writel(val, wcss->rmb_base + SSCAON_CONFIG);
+
+ /* 5 - wait for SSCAON_STATUS */
+ ret = readl_poll_timeout(wcss->rmb_base + SSCAON_STATUS,
+ val, (val & 0xffff) == 0x400, 1000,
+ HALT_CHECK_MAX_LOOPS);
+ if (ret) {
+ dev_err(wcss->dev,
+ "can't get SSCAON_STATUS rc:%d)\n", ret);
+ return ret;
+ }
+
+ /* 6 - De-assert WCSS_AON reset */
+ reset_control_assert(wcss->wcss_aon_reset);
+
+ /* 7 - Disable WCSSAON_CONFIG 13 */
+ val = readl(wcss->rmb_base + SSCAON_CONFIG);
+ val &= ~SSCAON_ENABLE;
+ writel(val, wcss->rmb_base + SSCAON_CONFIG);
+
+ /* 8 - De-assert WCSS/Q6 HALTREQ */
+ reset_control_assert(wcss->wcss_reset);
+
+ return 0;
+}
+
+static int q6v5_q6_powerdown(struct q6v5_wcss *wcss)
+{
+ int ret;
+ u32 val;
+ int i;
+
+ /* 1 - Halt Q6 bus interface */
+ q6v5_wcss_halt_axi_port(wcss, wcss->halt_map, wcss->halt_q6);
+
+ /* 2 - Disable Q6 Core clock */
+ val = readl(wcss->reg_base + Q6SS_GFMUX_CTL_REG);
+ val &= ~Q6SS_CLK_ENABLE;
+ writel(val, wcss->reg_base + Q6SS_GFMUX_CTL_REG);
+
+ /* 3 - Clamp I/O */
+ val = readl(wcss->reg_base + Q6SS_PWR_CTL_REG);
+ val |= Q6SS_CLAMP_IO;
+ writel(val, wcss->reg_base + Q6SS_PWR_CTL_REG);
+
+ /* 4 - Clamp WL */
+ val |= QDSS_BHS_ON;
+ writel(val, wcss->reg_base + Q6SS_PWR_CTL_REG);
+
+ /* 5 - Clear Erase standby */
+ val &= ~Q6SS_L2DATA_STBY_N;
+ writel(val, wcss->reg_base + Q6SS_PWR_CTL_REG);
+
+ /* 6 - Clear Sleep RTN */
+ val &= ~Q6SS_SLP_RET_N;
+ writel(val, wcss->reg_base + Q6SS_PWR_CTL_REG);
+
+ /* 7 - turn off Q6 memory foot/head switch one bank at a time */
+ for (i = 0; i < 20; i++) {
+ val = readl(wcss->reg_base + Q6SS_MEM_PWR_CTL);
+ val &= ~BIT(i);
+ writel(val, wcss->reg_base + Q6SS_MEM_PWR_CTL);
+ mdelay(1);
+ }
+
+ /* 8 - Assert QMC memory RTN */
+ val = readl(wcss->reg_base + Q6SS_PWR_CTL_REG);
+ val |= Q6SS_CLAMP_QMC_MEM;
+ writel(val, wcss->reg_base + Q6SS_PWR_CTL_REG);
+
+ /* 9 - Turn off BHS */
+ val &= ~Q6SS_BHS_ON;
+ writel(val, wcss->reg_base + Q6SS_PWR_CTL_REG);
+ udelay(1);
+
+ /* 10 - Wait till BHS Reset is done */
+ ret = readl_poll_timeout(wcss->reg_base + Q6SS_BHS_STATUS,
+ val, !(val & BHS_EN_REST_ACK), 1000,
+ HALT_CHECK_MAX_LOOPS);
+ if (ret) {
+ dev_err(wcss->dev, "BHS_STATUS not OFF (rc:%d)\n", ret);
+ return ret;
+ }
+
+ /* 11 - Assert WCSS reset */
+ reset_control_assert(wcss->wcss_reset);
+
+ /* 12 - Assert Q6 reset */
+ reset_control_assert(wcss->wcss_q6_reset);
+
+ return 0;
+}
+
+static int q6v5_wcss_stop(struct rproc *rproc)
+{
+ struct q6v5_wcss *wcss = rproc->priv;
+ int ret;
+
+ /* WCSS powerdown */
+ ret = qcom_q6v5_request_stop(&wcss->q6v5);
+ if (ret == -ETIMEDOUT) {
+ dev_err(wcss->dev, "timed out on wait\n");
+ return ret;
+ }
+
+ ret = q6v5_wcss_powerdown(wcss);
+ if (ret)
+ return ret;
+
+ /* Q6 Power down */
+ ret = q6v5_q6_powerdown(wcss);
+ if (ret)
+ return ret;
+
+ qcom_q6v5_unprepare(&wcss->q6v5);
+
+ return 0;
+}
+
+static void *q6v5_wcss_da_to_va(struct rproc *rproc, u64 da, int len)
+{
+ struct q6v5_wcss *wcss = rproc->priv;
+ int offset;
+
+ offset = da - wcss->mem_reloc;
+ if (offset < 0 || offset + len > wcss->mem_size)
+ return NULL;
+
+ return wcss->mem_region + offset;
+}
+
+static int q6v5_wcss_load(struct rproc *rproc, const struct firmware *fw)
+{
+ struct q6v5_wcss *wcss = rproc->priv;
+
+ return qcom_mdt_load_no_init(wcss->dev, fw, rproc->firmware,
+ 0, wcss->mem_region, wcss->mem_phys,
+ wcss->mem_size, &wcss->mem_reloc);
+}
+
+static const struct rproc_ops q6v5_wcss_ops = {
+ .start = q6v5_wcss_start,
+ .stop = q6v5_wcss_stop,
+ .da_to_va = q6v5_wcss_da_to_va,
+ .load = q6v5_wcss_load,
+ .get_boot_addr = rproc_elf_get_boot_addr,
+};
+
+static int q6v5_wcss_init_reset(struct q6v5_wcss *wcss)
+{
+ struct device *dev = wcss->dev;
+
+ wcss->wcss_aon_reset = devm_reset_control_get(dev, "wcss_aon_reset");
+ if (IS_ERR(wcss->wcss_aon_reset)) {
+ dev_err(wcss->dev, "unable to acquire wcss_aon_reset\n");
+ return PTR_ERR(wcss->wcss_aon_reset);
+ }
+
+ wcss->wcss_reset = devm_reset_control_get(dev, "wcss_reset");
+ if (IS_ERR(wcss->wcss_reset)) {
+ dev_err(wcss->dev, "unable to acquire wcss_reset\n");
+ return PTR_ERR(wcss->wcss_reset);
+ }
+
+ wcss->wcss_q6_reset = devm_reset_control_get(dev, "wcss_q6_reset");
+ if (IS_ERR(wcss->wcss_q6_reset)) {
+ dev_err(wcss->dev, "unable to acquire wcss_q6_reset\n");
+ return PTR_ERR(wcss->wcss_q6_reset);
+ }
+
+ return 0;
+}
+
+static int q6v5_wcss_init_mmio(struct q6v5_wcss *wcss,
+ struct platform_device *pdev)
+{
+ struct of_phandle_args args;
+ struct resource *res;
+ int ret;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qdsp6");
+ wcss->reg_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(wcss->reg_base))
+ return PTR_ERR(wcss->reg_base);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rmb");
+ wcss->rmb_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(wcss->rmb_base))
+ return PTR_ERR(wcss->rmb_base);
+
+ ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
+ "qcom,halt-regs", 3, 0, &args);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to parse qcom,halt-regs\n");
+ return -EINVAL;
+ }
+
+ wcss->halt_map = syscon_node_to_regmap(args.np);
+ of_node_put(args.np);
+ if (IS_ERR(wcss->halt_map))
+ return PTR_ERR(wcss->halt_map);
+
+ wcss->halt_q6 = args.args[0];
+ wcss->halt_wcss = args.args[1];
+ wcss->halt_nc = args.args[2];
+
+ return 0;
+}
+
+static int q6v5_alloc_memory_region(struct q6v5_wcss *wcss)
+{
+ struct reserved_mem *rmem = NULL;
+ struct device_node *node;
+ struct device *dev = wcss->dev;
+
+ node = of_parse_phandle(dev->of_node, "memory-region", 0);
+ if (node)
+ rmem = of_reserved_mem_lookup(node);
+ of_node_put(node);
+
+ if (!rmem) {
+ dev_err(dev, "unable to acquire memory-region\n");
+ return -EINVAL;
+ }
+
+ wcss->mem_phys = rmem->base;
+ wcss->mem_reloc = rmem->base;
+ wcss->mem_size = rmem->size;
+ wcss->mem_region = devm_ioremap_wc(dev, wcss->mem_phys, wcss->mem_size);
+ if (!wcss->mem_region) {
+ dev_err(dev, "unable to map memory region: %pa+%pa\n",
+ &rmem->base, &rmem->size);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static int q6v5_wcss_probe(struct platform_device *pdev)
+{
+ struct q6v5_wcss *wcss;
+ struct rproc *rproc;
+ int ret;
+
+ rproc = rproc_alloc(&pdev->dev, pdev->name, &q6v5_wcss_ops,
+ "IPQ8074/q6_fw.mdt", sizeof(*wcss));
+ if (!rproc) {
+ dev_err(&pdev->dev, "failed to allocate rproc\n");
+ return -ENOMEM;
+ }
+
+ wcss = rproc->priv;
+ wcss->dev = &pdev->dev;
+
+ ret = q6v5_wcss_init_mmio(wcss, pdev);
+ if (ret)
+ goto free_rproc;
+
+ ret = q6v5_alloc_memory_region(wcss);
+ if (ret)
+ goto free_rproc;
+
+ ret = q6v5_wcss_init_reset(wcss);
+ if (ret)
+ goto free_rproc;
+
+ ret = qcom_q6v5_init(&wcss->q6v5, pdev, rproc, WCSS_CRASH_REASON, NULL);
+ if (ret)
+ goto free_rproc;
+
+ ret = rproc_add(rproc);
+ if (ret)
+ goto free_rproc;
+
+ platform_set_drvdata(pdev, rproc);
+
+ return 0;
+
+free_rproc:
+ rproc_free(rproc);
+
+ return ret;
+}
+
+static int q6v5_wcss_remove(struct platform_device *pdev)
+{
+ struct rproc *rproc = platform_get_drvdata(pdev);
+
+ rproc_del(rproc);
+ rproc_free(rproc);
+
+ return 0;
+}
+
+static const struct of_device_id q6v5_wcss_of_match[] = {
+ { .compatible = "qcom,ipq8074-wcss-pil" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, q6v5_wcss_of_match);
+
+static struct platform_driver q6v5_wcss_driver = {
+ .probe = q6v5_wcss_probe,
+ .remove = q6v5_wcss_remove,
+ .driver = {
+ .name = "qcom-q6v5-wcss-pil",
+ .of_match_table = q6v5_wcss_of_match,
+ },
+};
+module_platform_driver(q6v5_wcss_driver);
+
+MODULE_DESCRIPTION("Hexagon WCSS Peripheral Image Loader");
+MODULE_LICENSE("GPL v2");