summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAndrew Lunn <andrew@lunn.ch>2012-12-28 13:25:10 +0100
committerJason Cooper <jason@lakedaemon.net>2013-05-26 01:12:02 +0000
commit4350a47bbac3f90c724d565d7b895262f454d0c3 (patch)
treef38246acfd6410dd242b9f628bf20bce258ee6bf
parent193da78bec1b510ab0a743348a7e9a2c24766268 (diff)
ARM: Kirkwood: Make use of the QNAP Power off driver.
Add a node into the DT binding and remove C code. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-rw-r--r--arch/arm/boot/dts/kirkwood-ts219.dtsi5
-rw-r--r--arch/arm/mach-kirkwood/Kconfig1
-rw-r--r--arch/arm/mach-kirkwood/board-ts219.c3
3 files changed, 6 insertions, 3 deletions
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index 64ea27cb3298..4e29460baf04 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -31,6 +31,11 @@
clock-frequency = <200000000>;
status = "okay";
};
+ poweroff@12100 {
+ compatible = "qnap,power-off";
+ reg = <0x12000 0x100>;
+ clocks = <&gate_clk 7>;
+ };
spi@10600 {
status = "okay";
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 58518a2a68f9..e12376b60b1b 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -315,6 +315,7 @@ config MACH_TS219_DT
select ARCH_KIRKWOOD_DT
select ARM_APPENDED_DTB
select ARM_ATAG_DTB_COMPAT
+ select POWER_RESET_QNAP
help
Say 'Y' here if you want your kernel to support the QNAP
TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c
index acb0187c7ee1..10fb3974de5a 100644
--- a/arch/arm/mach-kirkwood/board-ts219.c
+++ b/arch/arm/mach-kirkwood/board-ts219.c
@@ -23,7 +23,6 @@
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include "common.h"
-#include "tsx1x-common.h"
static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
@@ -38,8 +37,6 @@ void __init qnap_dt_ts219_init(void)
qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
kirkwood_ge00_init(&qnap_ts219_ge00_data);
-
- pm_power_off = qnap_tsx1x_power_off;
}
/* FIXME: Will not work with DT. Maybe use MPP40_GPIO? */