summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorPawel Moll <pawel.moll@arm.com>2014-04-23 10:49:31 +0100
committerPawel Moll <pawel.moll@arm.com>2014-05-15 17:02:19 +0100
commit974cc7b93441a0e78f030495436d1be7eb7c208d (patch)
treebc59d8bdfbb3c8bc25282495a40247eef810a415
parent29f9b6cf7bff6a118130163c848811e14f8022da (diff)
mfd: vexpress: Define the device as MFD cells
This patch - finally, after over 6 months! :-( - addresses Samuel's request to split the vexpress-sysreg driver into smaller portions and define the device in a form of MFD cells: * LEDs code has been completely removed and replaced with "gpio-leds" nodes in the tree (referencing dedicated GPIO subnodes in sysreg - bindings documentation updated); this also better fits the reality as some variants of the motherboard don't have all the LEDs populated * syscfg bridge code has been extracted into a separate driver (placed in drivers/misc for no better place) * all the ID & MISC registers are defined as sysconf making them available for other drivers should they need to use them (and also to the user via /sys/kernel/debug/regmap which can be helpful in platform debugging) Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Lee Jones <lee.jones@linaro.org>
-rw-r--r--Documentation/devicetree/bindings/arm/vexpress-sysreg.txt36
-rw-r--r--arch/arm/boot/dts/vexpress-v2m-rs1.dtsi76
-rw-r--r--arch/arm/boot/dts/vexpress-v2m.dtsi76
-rw-r--r--arch/arm/mach-vexpress/ct-ca9x4.c2
-rw-r--r--arch/arm/mach-vexpress/v2m.c15
-rw-r--r--drivers/mfd/Kconfig15
-rw-r--r--drivers/mfd/Makefile2
-rw-r--r--drivers/mfd/vexpress-sysreg.c533
-rw-r--r--drivers/misc/Kconfig9
-rw-r--r--drivers/misc/Makefile1
-rw-r--r--drivers/misc/vexpress-syscfg.c324
-rw-r--r--include/linux/vexpress.h16
12 files changed, 667 insertions, 438 deletions
diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
index 57b423f78995..00318d083c9e 100644
--- a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+++ b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
@@ -8,6 +8,8 @@ interrupt generation, MMC and NOR Flash control etc.
Required node properties:
- compatible value : = "arm,vexpress,sysreg";
- reg : physical base address and the size of the registers window
+
+Deprecated properties, replaced by GPIO subnodes (see below):
- gpio-controller : specifies that the node is a GPIO controller
- #gpio-cells : size of the GPIO specifier, should be 2:
- first cell is the pseudo-GPIO line number:
@@ -16,12 +18,42 @@ Required node properties:
2 - NOR FLASH WPn
- second cell can take standard GPIO flags (currently ignored).
+Control registers providing pseudo-GPIO lines must be represented
+by subnodes, each of them requiring the following properties:
+- compatible value : one of
+ "arm,vexpress-sysreg,sys_led"
+ "arm,vexpress-sysreg,sys_mci"
+ "arm,vexpress-sysreg,sys_flash"
+- gpio-controller : makes the node a GPIO controller
+- #gpio-cells : size of the GPIO specifier, must be 2:
+ - first cell is the function number:
+ - for sys_led : 0..7 = LED 0..7
+ - for sys_mci : 0 = MMC CARDIN, 1 = MMC WPROT
+ - for sys_flash : 0 = NOR FLASH WPn
+ - second cell can take standard GPIO flags (currently ignored).
+
Example:
v2m_sysreg: sysreg@10000000 {
compatible = "arm,vexpress-sysreg";
reg = <0x10000000 0x1000>;
- gpio-controller;
- #gpio-cells = <2>;
+
+ v2m_led_gpios: sys_led@08 {
+ compatible = "arm,vexpress-sysreg,sys_led";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_mmc_gpios: sys_mci@48 {
+ compatible = "arm,vexpress-sysreg,sys_mci";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_flash_gpios: sys_flash@4c {
+ compatible = "arm,vexpress-sysreg,sys_flash";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
This block also can also act a bridge to the platform's configuration
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index ac870fb3fa0d..756c986995a3 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -74,8 +74,24 @@
v2m_sysreg: sysreg@010000 {
compatible = "arm,vexpress-sysreg";
reg = <0x010000 0x1000>;
- gpio-controller;
- #gpio-cells = <2>;
+
+ v2m_led_gpios: sys_led@08 {
+ compatible = "arm,vexpress-sysreg,sys_led";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_mmc_gpios: sys_mci@48 {
+ compatible = "arm,vexpress-sysreg,sys_mci";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_flash_gpios: sys_flash@4c {
+ compatible = "arm,vexpress-sysreg,sys_flash";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
v2m_sysctl: sysctl@020000 {
@@ -113,8 +129,8 @@
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
interrupts = <9 10>;
- cd-gpios = <&v2m_sysreg 0 0>;
- wp-gpios = <&v2m_sysreg 1 0>;
+ cd-gpios = <&v2m_mmc_gpios 0 0>;
+ wp-gpios = <&v2m_mmc_gpios 1 0>;
max-frequency = <12000000>;
vmmc-supply = <&v2m_fixed_3v3>;
clocks = <&v2m_clk24mhz>, <&smbclk>;
@@ -265,6 +281,58 @@
clock-output-names = "v2m:refclk32khz";
};
+ leds {
+ compatible = "gpio-leds";
+
+ user@1 {
+ label = "v2m:green:user1";
+ gpios = <&v2m_led_gpios 0 0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ user@2 {
+ label = "v2m:green:user2";
+ gpios = <&v2m_led_gpios 1 0>;
+ linux,default-trigger = "mmc0";
+ };
+
+ user@3 {
+ label = "v2m:green:user3";
+ gpios = <&v2m_led_gpios 2 0>;
+ linux,default-trigger = "cpu0";
+ };
+
+ user@4 {
+ label = "v2m:green:user4";
+ gpios = <&v2m_led_gpios 3 0>;
+ linux,default-trigger = "cpu1";
+ };
+
+ user@5 {
+ label = "v2m:green:user5";
+ gpios = <&v2m_led_gpios 4 0>;
+ linux,default-trigger = "cpu2";
+ };
+
+ user@6 {
+ label = "v2m:green:user6";
+ gpios = <&v2m_led_gpios 5 0>;
+ linux,default-trigger = "cpu3";
+ };
+
+ user@7 {
+ label = "v2m:green:user7";
+ gpios = <&v2m_led_gpios 6 0>;
+ linux,default-trigger = "cpu4";
+ };
+
+ user@8 {
+ label = "v2m:green:user8";
+ gpios = <&v2m_led_gpios 7 0>;
+ linux,default-trigger = "cpu5";
+ };
+ };
+
mcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index f1420368355b..ba856d604fb7 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -73,8 +73,24 @@
v2m_sysreg: sysreg@00000 {
compatible = "arm,vexpress-sysreg";
reg = <0x00000 0x1000>;
- gpio-controller;
- #gpio-cells = <2>;
+
+ v2m_led_gpios: sys_led@08 {
+ compatible = "arm,vexpress-sysreg,sys_led";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_mmc_gpios: sys_mci@48 {
+ compatible = "arm,vexpress-sysreg,sys_mci";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_flash_gpios: sys_flash@4c {
+ compatible = "arm,vexpress-sysreg,sys_flash";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
v2m_sysctl: sysctl@01000 {
@@ -112,8 +128,8 @@
compatible = "arm,pl180", "arm,primecell";
reg = <0x05000 0x1000>;
interrupts = <9 10>;
- cd-gpios = <&v2m_sysreg 0 0>;
- wp-gpios = <&v2m_sysreg 1 0>;
+ cd-gpios = <&v2m_mmc_gpios 0 0>;
+ wp-gpios = <&v2m_mmc_gpios 1 0>;
max-frequency = <12000000>;
vmmc-supply = <&v2m_fixed_3v3>;
clocks = <&v2m_clk24mhz>, <&smbclk>;
@@ -264,6 +280,58 @@
clock-output-names = "v2m:refclk32khz";
};
+ leds {
+ compatible = "gpio-leds";
+
+ user@1 {
+ label = "v2m:green:user1";
+ gpios = <&v2m_led_gpios 0 0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ user@2 {
+ label = "v2m:green:user2";
+ gpios = <&v2m_led_gpios 1 0>;
+ linux,default-trigger = "mmc0";
+ };
+
+ user@3 {
+ label = "v2m:green:user3";
+ gpios = <&v2m_led_gpios 2 0>;
+ linux,default-trigger = "cpu0";
+ };
+
+ user@4 {
+ label = "v2m:green:user4";
+ gpios = <&v2m_led_gpios 3 0>;
+ linux,default-trigger = "cpu1";
+ };
+
+ user@5 {
+ label = "v2m:green:user5";
+ gpios = <&v2m_led_gpios 4 0>;
+ linux,default-trigger = "cpu2";
+ };
+
+ user@6 {
+ label = "v2m:green:user6";
+ gpios = <&v2m_led_gpios 5 0>;
+ linux,default-trigger = "cpu3";
+ };
+
+ user@7 {
+ label = "v2m:green:user7";
+ gpios = <&v2m_led_gpios 6 0>;
+ linux,default-trigger = "cpu4";
+ };
+
+ user@8 {
+ label = "v2m:green:user8";
+ gpios = <&v2m_led_gpios 7 0>;
+ linux,default-trigger = "cpu5";
+ };
+ };
+
mcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index 35e394aa00e5..494d70bfddad 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -160,7 +160,7 @@ static void __init ct_ca9x4_init(void)
amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource);
platform_device_register(&pmu_device);
- vexpress_sysreg_config_device_register(&osc1_device);
+ vexpress_syscfg_device_register(&osc1_device);
}
#ifdef CONFIG_SMP
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index ac95220a5019..90f04c9b11d2 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -201,8 +201,9 @@ static struct platform_device v2m_cf_device = {
static struct mmci_platform_data v2m_mmci_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .gpio_wp = VEXPRESS_GPIO_MMC_WPROT,
- .gpio_cd = VEXPRESS_GPIO_MMC_CARDIN,
+ .status = vexpress_get_mci_cardin,
+ .gpio_cd = -1,
+ .gpio_wp = -1,
};
static struct resource v2m_sysreg_resources[] = {
@@ -351,10 +352,10 @@ static void __init v2m_init(void)
for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++)
amba_device_register(v2m_amba_devs[i], &iomem_resource);
- vexpress_sysreg_config_device_register(&v2m_muxfpga_device);
- vexpress_sysreg_config_device_register(&v2m_shutdown_device);
- vexpress_sysreg_config_device_register(&v2m_reboot_device);
- vexpress_sysreg_config_device_register(&v2m_dvimode_device);
+ vexpress_syscfg_device_register(&v2m_muxfpga_device);
+ vexpress_syscfg_device_register(&v2m_shutdown_device);
+ vexpress_syscfg_device_register(&v2m_reboot_device);
+ vexpress_syscfg_device_register(&v2m_dvimode_device);
ct_desc->init_tile();
}
@@ -409,8 +410,6 @@ void __init v2m_dt_init_early(void)
{
u32 dt_hbi;
- vexpress_sysreg_of_early_init();
-
/* Confirm board type against DT property, if available */
if (of_property_read_u32(of_allnodes, "arm,hbi", &dt_hbi) == 0) {
u32 hbi = vexpress_get_hbi(VEXPRESS_SITE_MASTER);
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 33834120d057..490fd48a9541 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1227,12 +1227,17 @@ config MCP_UCB1200_TS
endmenu
-config VEXPRESS_CONFIG
- bool "ARM Versatile Express platform infrastructure"
- depends on ARM || ARM64
+config MFD_VEXPRESS_SYSREG
+ bool "Versatile Express System Registers"
+ depends on VEXPRESS_CONFIG
+ default y
+ select CLKSRC_MMIO
+ select GPIO_GENERIC_PLATFORM
+ select MFD_CORE
+ select MFD_SYSCON
help
- Platform configuration infrastructure for the ARM Ltd.
- Versatile Express.
+ System Registers are the platform configuration block
+ on the ARM Ltd. Versatile Express board.
endmenu
endif
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 9ba838eb5131..cec3487b539e 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -161,7 +161,7 @@ obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
obj-$(CONFIG_MFD_SEC_CORE) += sec-core.o sec-irq.o
obj-$(CONFIG_MFD_SYSCON) += syscon.o
obj-$(CONFIG_MFD_LM3533) += lm3533-core.o lm3533-ctrlbank.o
-obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-sysreg.o
+obj-$(CONFIG_MFD_VEXPRESS_SYSREG) += vexpress-sysreg.o
obj-$(CONFIG_MFD_RETU) += retu-mfd.o
obj-$(CONFIG_MFD_AS3711) += as3711.o
obj-$(CONFIG_MFD_AS3722) += as3722.o
diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c
index b4138a7168db..952df843b6be 100644
--- a/drivers/mfd/vexpress-sysreg.c
+++ b/drivers/mfd/vexpress-sysreg.c
@@ -11,25 +11,22 @@
* Copyright (C) 2012 ARM Limited
*/
+#include <linux/basic_mmio_gpio.h>
#include <linux/err.h>
-#include <linux/gpio.h>
#include <linux/io.h>
-#include <linux/leds.h>
+#include <linux/mfd/core.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
+#include <linux/platform_data/syscon.h>
#include <linux/platform_device.h>
-#include <linux/regulator/driver.h>
-#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/stat.h>
-#include <linux/timer.h>
#include <linux/vexpress.h>
#define SYS_ID 0x000
#define SYS_SW 0x004
#define SYS_LED 0x008
#define SYS_100HZ 0x024
-#define SYS_FLAGS 0x030
#define SYS_FLAGSSET 0x030
#define SYS_FLAGSCLR 0x034
#define SYS_NVFLAGS 0x038
@@ -51,36 +48,32 @@
#define SYS_ID_HBI_SHIFT 16
#define SYS_PROCIDx_HBI_SHIFT 0
-#define SYS_LED_LED(n) (1 << (n))
-
#define SYS_MCI_CARDIN (1 << 0)
#define SYS_MCI_WPROT (1 << 1)
-#define SYS_FLASH_WPn (1 << 0)
-
#define SYS_MISC_MASTERSITE (1 << 14)
-#define SYS_CFGCTRL_START (1 << 31)
-#define SYS_CFGCTRL_WRITE (1 << 30)
-#define SYS_CFGCTRL_DCC(n) (((n) & 0xf) << 26)
-#define SYS_CFGCTRL_FUNC(n) (((n) & 0x3f) << 20)
-#define SYS_CFGCTRL_SITE(n) (((n) & 0x3) << 16)
-#define SYS_CFGCTRL_POSITION(n) (((n) & 0xf) << 12)
-#define SYS_CFGCTRL_DEVICE(n) (((n) & 0xfff) << 0)
-#define SYS_CFGSTAT_ERR (1 << 1)
-#define SYS_CFGSTAT_COMPLETE (1 << 0)
+static void __iomem *__vexpress_sysreg_base;
+static void __iomem *vexpress_sysreg_base(void)
+{
+ if (!__vexpress_sysreg_base) {
+ struct device_node *node = of_find_compatible_node(NULL, NULL,
+ "arm,vexpress-sysreg");
-static void __iomem *vexpress_sysreg_base;
-static struct device *vexpress_sysreg_dev;
-static LIST_HEAD(vexpress_sysreg_config_funcs);
-static struct device *vexpress_sysreg_config_bridge;
+ __vexpress_sysreg_base = of_iomap(node, 0);
+ }
+
+ WARN_ON(!__vexpress_sysreg_base);
+
+ return __vexpress_sysreg_base;
+}
static int vexpress_sysreg_get_master(void)
{
- if (readl(vexpress_sysreg_base + SYS_MISC) & SYS_MISC_MASTERSITE)
+ if (readl(vexpress_sysreg_base() + SYS_MISC) & SYS_MISC_MASTERSITE)
return VEXPRESS_SITE_DB2;
return VEXPRESS_SITE_DB1;
@@ -88,8 +81,13 @@ static int vexpress_sysreg_get_master(void)
void vexpress_flags_set(u32 data)
{
- writel(~0, vexpress_sysreg_base + SYS_FLAGSCLR);
- writel(data, vexpress_sysreg_base + SYS_FLAGSSET);
+ writel(~0, vexpress_sysreg_base() + SYS_FLAGSCLR);
+ writel(data, vexpress_sysreg_base() + SYS_FLAGSSET);
+}
+
+unsigned int vexpress_get_mci_cardin(struct device *dev)
+{
+ return readl(vexpress_sysreg_base() + SYS_MCI) & SYS_MCI_CARDIN;
}
u32 vexpress_get_procid(int site)
@@ -97,7 +95,7 @@ u32 vexpress_get_procid(int site)
if (site == VEXPRESS_SITE_MASTER)
site = vexpress_sysreg_get_master();
- return readl(vexpress_sysreg_base + (site == VEXPRESS_SITE_DB1 ?
+ return readl(vexpress_sysreg_base() + (site == VEXPRESS_SITE_DB1 ?
SYS_PROCID0 : SYS_PROCID1));
}
@@ -107,7 +105,7 @@ u32 vexpress_get_hbi(int site)
switch (site) {
case VEXPRESS_SITE_MB:
- id = readl(vexpress_sysreg_base + SYS_ID);
+ id = readl(vexpress_sysreg_base() + SYS_ID);
return (id >> SYS_ID_HBI_SHIFT) & SYS_HBI_MASK;
case VEXPRESS_SITE_MASTER:
case VEXPRESS_SITE_DB1:
@@ -121,406 +119,143 @@ u32 vexpress_get_hbi(int site)
void __iomem *vexpress_get_24mhz_clock_base(void)
{
- return vexpress_sysreg_base + SYS_24MHZ;
-}
-
-
-struct vexpress_sysreg_config_func {
- struct list_head list;
- struct regmap *regmap;
- int num_templates;
- u32 template[0]; /* Keep this last */
-};
-
-static int vexpress_sysreg_config_exec(struct vexpress_sysreg_config_func *func,
- int index, bool write, u32 *data)
-{
- u32 command, status;
- int tries;
- long timeout;
-
- if (WARN_ON(!vexpress_sysreg_base))
- return -ENOENT;
-
- if (WARN_ON(index > func->num_templates))
- return -EINVAL;
-
- command = readl(vexpress_sysreg_base + SYS_CFGCTRL);
- if (WARN_ON(command & SYS_CFGCTRL_START))
- return -EBUSY;
-
- command = func->template[index];
- command |= SYS_CFGCTRL_START;
- command |= write ? SYS_CFGCTRL_WRITE : 0;
-
- /* Use a canary for reads */
- if (!write)
- *data = 0xdeadbeef;
-
- dev_dbg(vexpress_sysreg_dev, "command %x, data %x\n",
- command, *data);
- writel(*data, vexpress_sysreg_base + SYS_CFGDATA);
- writel(0, vexpress_sysreg_base + SYS_CFGSTAT);
- writel(command, vexpress_sysreg_base + SYS_CFGCTRL);
- mb();
-
- /* The operation can take ages... Go to sleep, 100us initially */
- tries = 100;
- timeout = 100;
- do {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(usecs_to_jiffies(timeout));
- if (signal_pending(current))
- return -EINTR;
-
- status = readl(vexpress_sysreg_base + SYS_CFGSTAT);
- if (status & SYS_CFGSTAT_ERR)
- return -EFAULT;
-
- if (timeout > 20)
- timeout -= 20;
- } while (--tries && !(status & SYS_CFGSTAT_COMPLETE));
- if (WARN_ON_ONCE(!tries))
- return -ETIMEDOUT;
-
- if (!write) {
- *data = readl(vexpress_sysreg_base + SYS_CFGDATA);
- dev_dbg(vexpress_sysreg_dev, "func %p, read data %x\n",
- func, *data);
- }
-
- return 0;
-}
-
-static int vexpress_sysreg_config_read(void *context, unsigned int index,
- unsigned int *val)
-{
- struct vexpress_sysreg_config_func *func = context;
-
- return vexpress_sysreg_config_exec(func, index, false, val);
-}
-
-static int vexpress_sysreg_config_write(void *context, unsigned int index,
- unsigned int val)
-{
- struct vexpress_sysreg_config_func *func = context;
-
- return vexpress_sysreg_config_exec(func, index, true, &val);
-}
-
-struct regmap_config vexpress_sysreg_regmap_config = {
- .lock = vexpress_config_lock,
- .unlock = vexpress_config_unlock,
- .reg_bits = 32,
- .val_bits = 32,
- .reg_read = vexpress_sysreg_config_read,
- .reg_write = vexpress_sysreg_config_write,
- .reg_format_endian = REGMAP_ENDIAN_LITTLE,
- .val_format_endian = REGMAP_ENDIAN_LITTLE,
-};
-
-static struct regmap *vexpress_sysreg_config_regmap_init(struct device *dev,
- void *context)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct vexpress_sysreg_config_func *func;
- struct property *prop;
- const __be32 *val = NULL;
- __be32 energy_quirk[4];
- int num;
- u32 site, position, dcc;
- int err;
- int i;
-
- if (dev->of_node) {
- err = vexpress_config_get_topo(dev->of_node, &site, &position,
- &dcc);
- if (err)
- return ERR_PTR(err);
-
- prop = of_find_property(dev->of_node,
- "arm,vexpress-sysreg,func", NULL);
- if (!prop)
- return ERR_PTR(-EINVAL);
-
- num = prop->length / sizeof(u32) / 2;
- val = prop->value;
- } else {
- if (pdev->num_resources != 1 ||
- pdev->resource[0].flags != IORESOURCE_BUS)
- return ERR_PTR(-EFAULT);
-
- site = pdev->resource[0].start;
- if (site == VEXPRESS_SITE_MASTER)
- site = vexpress_sysreg_get_master();
- position = 0;
- dcc = 0;
- num = 1;
- }
-
- /*
- * "arm,vexpress-energy" function used to be described
- * by its first device only, now it requires both
- */
- if (num == 1 && of_device_is_compatible(dev->of_node,
- "arm,vexpress-energy")) {
- num = 2;
- energy_quirk[0] = *val;
- energy_quirk[2] = *val++;
- energy_quirk[1] = *val;
- energy_quirk[3] = cpu_to_be32(be32_to_cpup(val) + 1);
- val = energy_quirk;
- }
-
- func = kzalloc(sizeof(*func) + sizeof(*func->template) * num,
- GFP_KERNEL);
- if (!func)
- return NULL;
-
- func->num_templates = num;
-
- for (i = 0; i < num; i++) {
- u32 function, device;
-
- if (dev->of_node) {
- function = be32_to_cpup(val++);
- device = be32_to_cpup(val++);
- } else {
- function = pdev->resource[0].end;
- device = pdev->id;
- }
-
- dev_dbg(dev, "func %p: %u/%u/%u/%u/%u\n",
- func, site, position, dcc,
- function, device);
-
- func->template[i] = SYS_CFGCTRL_DCC(dcc);
- func->template[i] |= SYS_CFGCTRL_SITE(site);
- func->template[i] |= SYS_CFGCTRL_POSITION(position);
- func->template[i] |= SYS_CFGCTRL_FUNC(function);
- func->template[i] |= SYS_CFGCTRL_DEVICE(device);
- }
-
- vexpress_sysreg_regmap_config.max_register = num - 1;
-
- func->regmap = regmap_init(dev, NULL, func,
- &vexpress_sysreg_regmap_config);
-
- if (IS_ERR(func->regmap))
- kfree(func);
- else
- list_add(&func->list, &vexpress_sysreg_config_funcs);
-
- return func->regmap;
-}
-
-static void vexpress_sysreg_config_regmap_exit(struct regmap *regmap,
- void *context)
-{
- struct vexpress_sysreg_config_func *func, *tmp;
-
- regmap_exit(regmap);
-
- list_for_each_entry_safe(func, tmp, &vexpress_sysreg_config_funcs,
- list) {
- if (func->regmap == regmap) {
- list_del(&vexpress_sysreg_config_funcs);
- kfree(func);
- break;
- }
- }
-}
-
-static struct vexpress_config_bridge_ops vexpress_sysreg_config_bridge_ops = {
- .regmap_init = vexpress_sysreg_config_regmap_init,
- .regmap_exit = vexpress_sysreg_config_regmap_exit,
-};
-
-int vexpress_sysreg_config_device_register(struct platform_device *pdev)
-{
- pdev->dev.parent = vexpress_sysreg_config_bridge;
-
- return platform_device_register(pdev);
+ return vexpress_sysreg_base() + SYS_24MHZ;
}
void __init vexpress_sysreg_early_init(void __iomem *base)
{
- vexpress_sysreg_base = base;
- vexpress_config_set_master(vexpress_sysreg_get_master());
-}
-
-void __init vexpress_sysreg_of_early_init(void)
-{
- struct device_node *node;
-
- if (vexpress_sysreg_base)
- return;
-
- node = of_find_compatible_node(NULL, NULL, "arm,vexpress-sysreg");
- if (WARN_ON(!node))
- return;
-
- vexpress_sysreg_base = of_iomap(node, 0);
- if (WARN_ON(!vexpress_sysreg_base))
- return;
+ __vexpress_sysreg_base = base;
vexpress_config_set_master(vexpress_sysreg_get_master());
}
-#ifdef CONFIG_GPIOLIB
-
-#define VEXPRESS_SYSREG_GPIO(_name, _reg, _value) \
- [VEXPRESS_GPIO_##_name] = { \
- .reg = _reg, \
- .value = _reg##_##_value, \
- }
+/* The sysreg block is just a random collection of various functions... */
-static struct vexpress_sysreg_gpio {
- unsigned long reg;
- u32 value;
-} vexpress_sysreg_gpios[] = {
- VEXPRESS_SYSREG_GPIO(MMC_CARDIN, SYS_MCI, CARDIN),
- VEXPRESS_SYSREG_GPIO(MMC_WPROT, SYS_MCI, WPROT),
- VEXPRESS_SYSREG_GPIO(FLASH_WPn, SYS_FLASH, WPn),
- VEXPRESS_SYSREG_GPIO(LED0, SYS_LED, LED(0)),
- VEXPRESS_SYSREG_GPIO(LED1, SYS_LED, LED(1)),
- VEXPRESS_SYSREG_GPIO(LED2, SYS_LED, LED(2)),
- VEXPRESS_SYSREG_GPIO(LED3, SYS_LED, LED(3)),
- VEXPRESS_SYSREG_GPIO(LED4, SYS_LED, LED(4)),
- VEXPRESS_SYSREG_GPIO(LED5, SYS_LED, LED(5)),
- VEXPRESS_SYSREG_GPIO(LED6, SYS_LED, LED(6)),
- VEXPRESS_SYSREG_GPIO(LED7, SYS_LED, LED(7)),
+static struct syscon_platform_data vexpress_sysreg_sys_id_pdata = {
+ .label = "sys_id",
};
-static int vexpress_sysreg_gpio_direction_input(struct gpio_chip *chip,
- unsigned offset)
-{
- return 0;
-}
-
-static int vexpress_sysreg_gpio_get(struct gpio_chip *chip,
- unsigned offset)
-{
- struct vexpress_sysreg_gpio *gpio = &vexpress_sysreg_gpios[offset];
- u32 reg_value = readl(vexpress_sysreg_base + gpio->reg);
-
- return !!(reg_value & gpio->value);
-}
-
-static void vexpress_sysreg_gpio_set(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- struct vexpress_sysreg_gpio *gpio = &vexpress_sysreg_gpios[offset];
- u32 reg_value = readl(vexpress_sysreg_base + gpio->reg);
-
- if (value)
- reg_value |= gpio->value;
- else
- reg_value &= ~gpio->value;
-
- writel(reg_value, vexpress_sysreg_base + gpio->reg);
-}
-
-static int vexpress_sysreg_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- vexpress_sysreg_gpio_set(chip, offset, value);
-
- return 0;
-}
-
-static struct gpio_chip vexpress_sysreg_gpio_chip = {
- .label = "vexpress-sysreg",
- .direction_input = vexpress_sysreg_gpio_direction_input,
- .direction_output = vexpress_sysreg_gpio_direction_output,
- .get = vexpress_sysreg_gpio_get,
- .set = vexpress_sysreg_gpio_set,
- .ngpio = ARRAY_SIZE(vexpress_sysreg_gpios),
- .base = 0,
+static struct bgpio_pdata vexpress_sysreg_sys_led_pdata = {
+ .label = "sys_led",
+ .base = -1,
+ .ngpio = 8,
};
-
-#define VEXPRESS_SYSREG_GREEN_LED(_name, _default_trigger, _gpio) \
- { \
- .name = "v2m:green:"_name, \
- .default_trigger = _default_trigger, \
- .gpio = VEXPRESS_GPIO_##_gpio, \
- }
-
-struct gpio_led vexpress_sysreg_leds[] = {
- VEXPRESS_SYSREG_GREEN_LED("user1", "heartbeat", LED0),
- VEXPRESS_SYSREG_GREEN_LED("user2", "mmc0", LED1),
- VEXPRESS_SYSREG_GREEN_LED("user3", "cpu0", LED2),
- VEXPRESS_SYSREG_GREEN_LED("user4", "cpu1", LED3),
- VEXPRESS_SYSREG_GREEN_LED("user5", "cpu2", LED4),
- VEXPRESS_SYSREG_GREEN_LED("user6", "cpu3", LED5),
- VEXPRESS_SYSREG_GREEN_LED("user7", "cpu4", LED6),
- VEXPRESS_SYSREG_GREEN_LED("user8", "cpu5", LED7),
+static struct bgpio_pdata vexpress_sysreg_sys_mci_pdata = {
+ .label = "sys_mci",
+ .base = -1,
+ .ngpio = 2,
};
-struct gpio_led_platform_data vexpress_sysreg_leds_pdata = {
- .num_leds = ARRAY_SIZE(vexpress_sysreg_leds),
- .leds = vexpress_sysreg_leds,
+static struct bgpio_pdata vexpress_sysreg_sys_flash_pdata = {
+ .label = "sys_flash",
+ .base = -1,
+ .ngpio = 1,
};
-#endif
-
+static struct syscon_platform_data vexpress_sysreg_sys_misc_pdata = {
+ .label = "sys_misc",
+};
-static ssize_t vexpress_sysreg_sys_id_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "0x%08x\n", readl(vexpress_sysreg_base + SYS_ID));
-}
+static struct syscon_platform_data vexpress_sysreg_sys_procid_pdata = {
+ .label = "sys_procid",
+};
-DEVICE_ATTR(sys_id, S_IRUGO, vexpress_sysreg_sys_id_show, NULL);
+static struct mfd_cell vexpress_sysreg_cells[] = {
+ {
+ .name = "syscon",
+ .num_resources = 1,
+ .resources = (struct resource []) {
+ DEFINE_RES_MEM(SYS_ID, 0x4),
+ },
+ .platform_data = &vexpress_sysreg_sys_id_pdata,
+ .pdata_size = sizeof(vexpress_sysreg_sys_id_pdata),
+ }, {
+ .name = "basic-mmio-gpio",
+ .of_compatible = "arm,vexpress-sysreg,sys_led",
+ .num_resources = 1,
+ .resources = (struct resource []) {
+ DEFINE_RES_MEM_NAMED(SYS_LED, 0x4, "dat"),
+ },
+ .platform_data = &vexpress_sysreg_sys_led_pdata,
+ .pdata_size = sizeof(vexpress_sysreg_sys_led_pdata),
+ }, {
+ .name = "basic-mmio-gpio",
+ .of_compatible = "arm,vexpress-sysreg,sys_mci",
+ .num_resources = 1,
+ .resources = (struct resource []) {
+ DEFINE_RES_MEM_NAMED(SYS_MCI, 0x4, "dat"),
+ },
+ .platform_data = &vexpress_sysreg_sys_mci_pdata,
+ .pdata_size = sizeof(vexpress_sysreg_sys_mci_pdata),
+ }, {
+ .name = "basic-mmio-gpio",
+ .of_compatible = "arm,vexpress-sysreg,sys_flash",
+ .num_resources = 1,
+ .resources = (struct resource []) {
+ DEFINE_RES_MEM_NAMED(SYS_FLASH, 0x4, "dat"),
+ },
+ .platform_data = &vexpress_sysreg_sys_flash_pdata,
+ .pdata_size = sizeof(vexpress_sysreg_sys_flash_pdata),
+ }, {
+ .name = "syscon",
+ .num_resources = 1,
+ .resources = (struct resource []) {
+ DEFINE_RES_MEM(SYS_MISC, 0x4),
+ },
+ .platform_data = &vexpress_sysreg_sys_misc_pdata,
+ .pdata_size = sizeof(vexpress_sysreg_sys_misc_pdata),
+ }, {
+ .name = "syscon",
+ .num_resources = 1,
+ .resources = (struct resource []) {
+ DEFINE_RES_MEM(SYS_PROCID0, 0x8),
+ },
+ .platform_data = &vexpress_sysreg_sys_procid_pdata,
+ .pdata_size = sizeof(vexpress_sysreg_sys_procid_pdata),
+ }, {
+ .name = "vexpress-syscfg",
+ .num_resources = 1,
+ .resources = (struct resource []) {
+ DEFINE_RES_MEM(SYS_CFGDATA, 0xc),
+ },
+ }
+};
static int vexpress_sysreg_probe(struct platform_device *pdev)
{
- int err;
- struct resource *res = platform_get_resource(pdev,
- IORESOURCE_MEM, 0);
-
- if (!devm_request_mem_region(&pdev->dev, res->start,
- resource_size(res), pdev->name)) {
- dev_err(&pdev->dev, "Failed to request memory region!\n");
- return -EBUSY;
- }
+ struct resource *mem;
+ void __iomem *base;
+ struct bgpio_chip *mmc_gpio_chip;
- if (!vexpress_sysreg_base)
- vexpress_sysreg_base = devm_ioremap(&pdev->dev, res->start,
- resource_size(res));
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem)
+ return -EINVAL;
- if (!vexpress_sysreg_base) {
- dev_err(&pdev->dev, "Failed to obtain base address!\n");
- return -EFAULT;
- }
+ base = devm_ioremap(&pdev->dev, mem->start, resource_size(mem));
+ if (!base)
+ return -ENOMEM;
vexpress_config_set_master(vexpress_sysreg_get_master());
- vexpress_sysreg_dev = &pdev->dev;
-
-#ifdef CONFIG_GPIOLIB
- vexpress_sysreg_gpio_chip.dev = &pdev->dev;
- err = gpiochip_add(&vexpress_sysreg_gpio_chip);
- if (err) {
- dev_err(&pdev->dev, "Failed to register GPIO chip! (%d)\n",
- err);
- return err;
- }
- platform_device_register_data(vexpress_sysreg_dev, "leds-gpio",
- PLATFORM_DEVID_AUTO, &vexpress_sysreg_leds_pdata,
- sizeof(vexpress_sysreg_leds_pdata));
-#endif
-
- vexpress_sysreg_config_bridge = vexpress_config_bridge_register(
- &pdev->dev, &vexpress_sysreg_config_bridge_ops, NULL);
- WARN_ON(!vexpress_sysreg_config_bridge);
-
- device_create_file(vexpress_sysreg_dev, &dev_attr_sys_id);
-
- return 0;
+ /*
+ * Duplicated SYS_MCI pseudo-GPIO controller for compatibility with
+ * older trees using sysreg node for MMC control lines.
+ */
+ mmc_gpio_chip = devm_kzalloc(&pdev->dev, sizeof(*mmc_gpio_chip),
+ GFP_KERNEL);
+ if (!mmc_gpio_chip)
+ return -ENOMEM;
+ bgpio_init(mmc_gpio_chip, &pdev->dev, 0x4, base + SYS_MCI,
+ NULL, NULL, NULL, NULL, 0);
+ mmc_gpio_chip->gc.ngpio = 2;
+ gpiochip_add(&mmc_gpio_chip->gc);
+
+ return mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO,
+ vexpress_sysreg_cells,
+ ARRAY_SIZE(vexpress_sysreg_cells), mem, 0, NULL);
}
static const struct of_device_id vexpress_sysreg_match[] = {
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 8baff0effc7d..d9663ef90ce8 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -515,6 +515,15 @@ config SRAM
the genalloc API. It is supposed to be used for small on-chip SRAM
areas found on many SoCs.
+config VEXPRESS_SYSCFG
+ bool "Versatile Express System Configuration driver"
+ depends on VEXPRESS_CONFIG
+ default y
+ help
+ ARM Ltd. Versatile Express uses specialised platform configuration
+ bus. System Configuration interface is one of the possible means
+ of generating transactions on this bus.
+
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 7eb4b69580c0..d59ce1261b38 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -55,3 +55,4 @@ obj-$(CONFIG_SRAM) += sram.o
obj-y += mic/
obj-$(CONFIG_GENWQE) += genwqe/
obj-$(CONFIG_ECHO) += echo/
+obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o
diff --git a/drivers/misc/vexpress-syscfg.c b/drivers/misc/vexpress-syscfg.c
new file mode 100644
index 000000000000..73068e50e56d
--- /dev/null
+++ b/drivers/misc/vexpress-syscfg.c
@@ -0,0 +1,324 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2014 ARM Limited
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/syscore_ops.h>
+#include <linux/vexpress.h>
+
+
+#define SYS_CFGDATA 0x0
+
+#define SYS_CFGCTRL 0x4
+#define SYS_CFGCTRL_START (1 << 31)
+#define SYS_CFGCTRL_WRITE (1 << 30)
+#define SYS_CFGCTRL_DCC(n) (((n) & 0xf) << 26)
+#define SYS_CFGCTRL_FUNC(n) (((n) & 0x3f) << 20)
+#define SYS_CFGCTRL_SITE(n) (((n) & 0x3) << 16)
+#define SYS_CFGCTRL_POSITION(n) (((n) & 0xf) << 12)
+#define SYS_CFGCTRL_DEVICE(n) (((n) & 0xfff) << 0)
+
+#define SYS_CFGSTAT 0x8
+#define SYS_CFGSTAT_ERR (1 << 1)
+#define SYS_CFGSTAT_COMPLETE (1 << 0)
+
+
+struct vexpress_syscfg {
+ struct device *dev;
+ void __iomem *base;
+ struct list_head funcs;
+};
+
+struct vexpress_syscfg_func {
+ struct list_head list;
+ struct vexpress_syscfg *syscfg;
+ struct regmap *regmap;
+ int num_templates;
+ u32 template[0]; /* Keep it last! */
+};
+
+
+static int vexpress_syscfg_exec(struct vexpress_syscfg_func *func,
+ int index, bool write, u32 *data)
+{
+ struct vexpress_syscfg *syscfg = func->syscfg;
+ u32 command, status;
+ int tries;
+ long timeout;
+
+ if (WARN_ON(index > func->num_templates))
+ return -EINVAL;
+
+ command = readl(syscfg->base + SYS_CFGCTRL);
+ if (WARN_ON(command & SYS_CFGCTRL_START))
+ return -EBUSY;
+
+ command = func->template[index];
+ command |= SYS_CFGCTRL_START;
+ command |= write ? SYS_CFGCTRL_WRITE : 0;
+
+ /* Use a canary for reads */
+ if (!write)
+ *data = 0xdeadbeef;
+
+ dev_dbg(syscfg->dev, "func %p, command %x, data %x\n",
+ func, command, *data);
+ writel(*data, syscfg->base + SYS_CFGDATA);
+ writel(0, syscfg->base + SYS_CFGSTAT);
+ writel(command, syscfg->base + SYS_CFGCTRL);
+ mb();
+
+ /* The operation can take ages... Go to sleep, 100us initially */
+ tries = 100;
+ timeout = 100;
+ do {
+ if (!irqs_disabled()) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(usecs_to_jiffies(timeout));
+ if (signal_pending(current))
+ return -EINTR;
+ } else {
+ udelay(timeout);
+ }
+
+ status = readl(syscfg->base + SYS_CFGSTAT);
+ if (status & SYS_CFGSTAT_ERR)
+ return -EFAULT;
+
+ if (timeout > 20)
+ timeout -= 20;
+ } while (--tries && !(status & SYS_CFGSTAT_COMPLETE));
+ if (WARN_ON_ONCE(!tries))
+ return -ETIMEDOUT;
+
+ if (!write) {
+ *data = readl(syscfg->base + SYS_CFGDATA);
+ dev_dbg(syscfg->dev, "func %p, read data %x\n", func, *data);
+ }
+
+ return 0;
+}
+
+static int vexpress_syscfg_read(void *context, unsigned int index,
+ unsigned int *val)
+{
+ struct vexpress_syscfg_func *func = context;
+
+ return vexpress_syscfg_exec(func, index, false, val);
+}
+
+static int vexpress_syscfg_write(void *context, unsigned int index,
+ unsigned int val)
+{
+ struct vexpress_syscfg_func *func = context;
+
+ return vexpress_syscfg_exec(func, index, true, &val);
+}
+
+struct regmap_config vexpress_syscfg_regmap_config = {
+ .lock = vexpress_config_lock,
+ .unlock = vexpress_config_unlock,
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_read = vexpress_syscfg_read,
+ .reg_write = vexpress_syscfg_write,
+ .reg_format_endian = REGMAP_ENDIAN_LITTLE,
+ .val_format_endian = REGMAP_ENDIAN_LITTLE,
+};
+
+
+static struct regmap *vexpress_syscfg_regmap_init(struct device *dev,
+ void *context)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct vexpress_syscfg *syscfg = context;
+ struct vexpress_syscfg_func *func;
+ struct property *prop;
+ const __be32 *val = NULL;
+ __be32 energy_quirk[4];
+ int num;
+ u32 site, position, dcc;
+ int i;
+
+ if (dev->of_node) {
+ int err = vexpress_config_get_topo(dev->of_node, &site,
+ &position, &dcc);
+
+ if (err)
+ return ERR_PTR(err);
+
+ prop = of_find_property(dev->of_node,
+ "arm,vexpress-sysreg,func", NULL);
+ if (!prop)
+ return ERR_PTR(-EINVAL);
+
+ num = prop->length / sizeof(u32) / 2;
+ val = prop->value;
+ } else {
+ if (pdev->num_resources != 1 ||
+ pdev->resource[0].flags != IORESOURCE_BUS)
+ return ERR_PTR(-EFAULT);
+
+ site = pdev->resource[0].start;
+ if (site == VEXPRESS_SITE_MASTER)
+ site = vexpress_config_get_master();
+ position = 0;
+ dcc = 0;
+ num = 1;
+ }
+
+ /*
+ * "arm,vexpress-energy" function used to be described
+ * by its first device only, now it requires both
+ */
+ if (num == 1 && of_device_is_compatible(dev->of_node,
+ "arm,vexpress-energy")) {
+ num = 2;
+ energy_quirk[0] = *val;
+ energy_quirk[2] = *val++;
+ energy_quirk[1] = *val;
+ energy_quirk[3] = cpu_to_be32(be32_to_cpup(val) + 1);
+ val = energy_quirk;
+ }
+
+ func = kzalloc(sizeof(*func) + sizeof(*func->template) * num,
+ GFP_KERNEL);
+ if (!func)
+ return NULL;
+
+ func->syscfg = syscfg;
+ func->num_templates = num;
+
+ for (i = 0; i < num; i++) {
+ u32 function, device;
+
+ if (dev->of_node) {
+ function = be32_to_cpup(val++);
+ device = be32_to_cpup(val++);
+ } else {
+ function = pdev->resource[0].end;
+ device = pdev->id;
+ }
+
+ dev_dbg(dev, "func %p: %u/%u/%u/%u/%u\n",
+ func, site, position, dcc,
+ function, device);
+
+ func->template[i] = SYS_CFGCTRL_DCC(dcc);
+ func->template[i] |= SYS_CFGCTRL_SITE(site);
+ func->template[i] |= SYS_CFGCTRL_POSITION(position);
+ func->template[i] |= SYS_CFGCTRL_FUNC(function);
+ func->template[i] |= SYS_CFGCTRL_DEVICE(device);
+ }
+
+ vexpress_syscfg_regmap_config.max_register = num - 1;
+
+ func->regmap = regmap_init(dev, NULL, func,
+ &vexpress_syscfg_regmap_config);
+
+ if (IS_ERR(func->regmap))
+ kfree(func);
+ else
+ list_add(&func->list, &syscfg->funcs);
+
+ return func->regmap;
+}
+
+static void vexpress_syscfg_regmap_exit(struct regmap *regmap, void *context)
+{
+ struct vexpress_syscfg *syscfg = context;
+ struct vexpress_syscfg_func *func, *tmp;
+
+ regmap_exit(regmap);
+
+ list_for_each_entry_safe(func, tmp, &syscfg->funcs, list) {
+ if (func->regmap == regmap) {
+ list_del(&syscfg->funcs);
+ kfree(func);
+ break;
+ }
+ }
+}
+
+static struct vexpress_config_bridge_ops vexpress_syscfg_bridge_ops = {
+ .regmap_init = vexpress_syscfg_regmap_init,
+ .regmap_exit = vexpress_syscfg_regmap_exit,
+};
+
+
+/* Non-DT hack, to be gone... */
+static struct device *vexpress_syscfg_bridge;
+
+int vexpress_syscfg_device_register(struct platform_device *pdev)
+{
+ pdev->dev.parent = vexpress_syscfg_bridge;
+
+ return platform_device_register(pdev);
+}
+
+
+int vexpress_syscfg_probe(struct platform_device *pdev)
+{
+ struct vexpress_syscfg *syscfg;
+ struct resource *res;
+ struct device *bridge;
+
+ syscfg = devm_kzalloc(&pdev->dev, sizeof(*syscfg), GFP_KERNEL);
+ if (!syscfg)
+ return -ENOMEM;
+ syscfg->dev = &pdev->dev;
+ INIT_LIST_HEAD(&syscfg->funcs);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!devm_request_mem_region(&pdev->dev, res->start,
+ resource_size(res), pdev->name))
+ return -EBUSY;
+
+ syscfg->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (!syscfg->base)
+ return -EFAULT;
+
+ /* Must use dev.parent (MFD), as that's where DT phandle points at... */
+ bridge = vexpress_config_bridge_register(pdev->dev.parent,
+ &vexpress_syscfg_bridge_ops, syscfg);
+ if (IS_ERR(bridge))
+ return PTR_ERR(bridge);
+
+ /* Non-DT case */
+ if (!pdev->dev.of_node)
+ vexpress_syscfg_bridge = bridge;
+
+ return 0;
+}
+
+static const struct platform_device_id vexpress_syscfg_id_table[] = {
+ { "vexpress-syscfg", },
+ {},
+};
+
+static struct platform_driver vexpress_syscfg_driver = {
+ .driver.name = "vexpress-syscfg",
+ .id_table = vexpress_syscfg_id_table,
+ .probe = vexpress_syscfg_probe,
+};
+
+static int __init vexpress_syscfg_init(void)
+{
+ return platform_driver_register(&vexpress_syscfg_driver);
+}
+core_initcall(vexpress_syscfg_init);
diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h
index 6b206ba6aa0e..46636e3f43fd 100644
--- a/include/linux/vexpress.h
+++ b/include/linux/vexpress.h
@@ -24,18 +24,6 @@
#define VEXPRESS_SITE_DB2 2
#define VEXPRESS_SITE_MASTER 0xf
-#define VEXPRESS_GPIO_MMC_CARDIN 0
-#define VEXPRESS_GPIO_MMC_WPROT 1
-#define VEXPRESS_GPIO_FLASH_WPn 2
-#define VEXPRESS_GPIO_LED0 3
-#define VEXPRESS_GPIO_LED1 4
-#define VEXPRESS_GPIO_LED2 5
-#define VEXPRESS_GPIO_LED3 6
-#define VEXPRESS_GPIO_LED4 7
-#define VEXPRESS_GPIO_LED5 8
-#define VEXPRESS_GPIO_LED6 9
-#define VEXPRESS_GPIO_LED7 10
-
#define VEXPRESS_RES_FUNC(_site, _func) \
{ \
.start = (_site), \
@@ -70,14 +58,14 @@ struct regmap *devm_regmap_init_vexpress_config(struct device *dev);
/* Platform control */
+unsigned int vexpress_get_mci_cardin(struct device *dev);
u32 vexpress_get_procid(int site);
u32 vexpress_get_hbi(int site);
void *vexpress_get_24mhz_clock_base(void);
void vexpress_flags_set(u32 data);
void vexpress_sysreg_early_init(void __iomem *base);
-void vexpress_sysreg_of_early_init(void);
-int vexpress_sysreg_config_device_register(struct platform_device *pdev);
+int vexpress_syscfg_device_register(struct platform_device *pdev);
/* Clocks */