summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-07-03 20:04:16 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2017-07-03 20:04:16 -0700
commit9a715cd54347948e74f1a597da22884af287727d (patch)
tree0a824e6501e9a8dcb3fdd05749e13c149e7dfb9f
parentcbcd4f08aa637b74f575268770da86a00fabde6d (diff)
parenta6d7514b14a6ea2a3868bdcb2fca7b2410738595 (diff)
Merge tag 'tty-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH: "Here is the large tty/serial patchset for 4.13-rc1. A lot of tty and serial driver updates are in here, along with some fixups for some __get/put_user usages that were reported. Nothing huge, just lots of development by a number of different developers, full details in the shortlog. All of these have been in linux-next for a while" * tag 'tty-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits) tty: serial: lpuart: add a more accurate baud rate calculation method tty: serial: lpuart: add earlycon support for imx7ulp tty: serial: lpuart: add imx7ulp support dt-bindings: serial: fsl-lpuart: add i.MX7ULP support tty: serial: lpuart: add little endian 32 bit register support tty: serial: lpuart: refactor lpuart32_{read|write} prototype tty: serial: lpuart: introduce lpuart_soc_data to represent SoC property serial: imx-serial - move DMA buffer configuration to DT serial: imx: Enable RTSD only when needed serial: imx: Remove unused members from imx_port struct serial: 8250: 8250_omap: Fix race b/w dma completion and RX timeout serial: 8250: Fix THRE flag usage for CAP_MINI tty/serial: meson_uart: update to stable bindings dt-bindings: serial: Add bindings for the Amlogic Meson UARTs serial: Delete dead code for CIR serial ports serial: sirf: make of_device_ids const serial/mpsc: switch to dma_alloc_attrs tty: serial: Add Actions Semi Owl UART earlycon dt-bindings: serial: Document Actions Semi Owl UARTs tty/serial: atmel: make the driver DT only ...
-rw-r--r--Documentation/ABI/stable/sysfs-driver-aspeed-vuart15
-rw-r--r--Documentation/admin-guide/kernel-parameters.txt6
-rw-r--r--Documentation/devicetree/bindings/serial/8250.txt3
-rw-r--r--Documentation/devicetree/bindings/serial/actions,owl-uart.txt16
-rw-r--r--Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt38
-rw-r--r--Documentation/devicetree/bindings/serial/fsl-imx-uart.txt2
-rw-r--r--Documentation/devicetree/bindings/serial/fsl-lpuart.txt2
-rw-r--r--Documentation/serial/n_gsm.txt7
-rw-r--r--MAINTAINERS2
-rw-r--r--arch/alpha/include/uapi/asm/ioctls.h1
-rw-r--r--arch/ia64/hp/sim/simserial.c13
-rw-r--r--arch/mips/include/uapi/asm/ioctls.h1
-rw-r--r--arch/parisc/include/uapi/asm/ioctls.h1
-rw-r--r--arch/powerpc/include/uapi/asm/ioctls.h1
-rw-r--r--arch/sh/include/uapi/asm/ioctls.h1
-rw-r--r--arch/sparc/include/uapi/asm/ioctls.h3
-rw-r--r--arch/xtensa/include/uapi/asm/ioctls.h1
-rw-r--r--drivers/tty/Makefile3
-rw-r--r--drivers/tty/amiserial.c23
-rw-r--r--drivers/tty/cyclades.c21
-rw-r--r--drivers/tty/hvc/hvcs.c3
-rw-r--r--drivers/tty/n_gsm.c54
-rw-r--r--drivers/tty/n_null.c80
-rw-r--r--drivers/tty/pty.c93
-rw-r--r--drivers/tty/rocket.c27
-rw-r--r--drivers/tty/serdev/serdev-ttyport.c2
-rw-r--r--drivers/tty/serial/8250/8250.h3
-rw-r--r--drivers/tty/serial/8250/8250_aspeed_vuart.c323
-rw-r--r--drivers/tty/serial/8250/8250_bcm2835aux.c2
-rw-r--r--drivers/tty/serial/8250/8250_core.c23
-rw-r--r--drivers/tty/serial/8250/8250_exar.c16
-rw-r--r--drivers/tty/serial/8250/8250_of.c10
-rw-r--r--drivers/tty/serial/8250/8250_omap.c27
-rw-r--r--drivers/tty/serial/8250/8250_port.c12
-rw-r--r--drivers/tty/serial/8250/Kconfig10
-rw-r--r--drivers/tty/serial/8250/Makefile1
-rw-r--r--drivers/tty/serial/Kconfig35
-rw-r--r--drivers/tty/serial/Makefile1
-rw-r--r--drivers/tty/serial/amba-pl010.c31
-rw-r--r--drivers/tty/serial/atmel_serial.c164
-rw-r--r--drivers/tty/serial/fsl_lpuart.c286
-rw-r--r--drivers/tty/serial/imx.c58
-rw-r--r--drivers/tty/serial/meson_uart.c153
-rw-r--r--drivers/tty/serial/mpsc.c10
-rw-r--r--drivers/tty/serial/owl-uart.c135
-rw-r--r--drivers/tty/serial/pch_uart.c3
-rw-r--r--drivers/tty/serial/sccnxp.c15
-rw-r--r--drivers/tty/serial/serial_core.c5
-rw-r--r--drivers/tty/serial/sh-sci.c45
-rw-r--r--drivers/tty/serial/sirfsoc_uart.c2
-rw-r--r--drivers/tty/serial/xilinx_uartps.c10
-rw-r--r--drivers/tty/tty_ldisc.c44
-rw-r--r--drivers/tty/vt/consolemap.c56
-rw-r--r--drivers/tty/vt/keyboard.c3
-rw-r--r--drivers/tty/vt/vt.c8
-rw-r--r--drivers/tty/vt/vt_ioctl.c8
-rw-r--r--drivers/usb/serial/ftdi_sio.c67
-rw-r--r--fs/compat_ioctl.c6
-rw-r--r--include/linux/platform_data/atmel.h10
-rw-r--r--include/linux/serial_core.h1
-rw-r--r--include/linux/tty.h1
-rw-r--r--include/uapi/asm-generic/ioctls.h1
-rw-r--r--include/uapi/linux/serial.h3
-rw-r--r--include/uapi/linux/serial_core.h2
-rw-r--r--include/uapi/linux/tty.h1
-rw-r--r--net/irda/ircomm/ircomm_tty_ioctl.c107
66 files changed, 1405 insertions, 712 deletions
diff --git a/Documentation/ABI/stable/sysfs-driver-aspeed-vuart b/Documentation/ABI/stable/sysfs-driver-aspeed-vuart
new file mode 100644
index 000000000000..8062953ce77b
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-aspeed-vuart
@@ -0,0 +1,15 @@
+What: /sys/bus/platform/drivers/aspeed-vuart/*/lpc_address
+Date: April 2017
+Contact: Jeremy Kerr <jk@ozlabs.org>
+Description: Configures which IO port the host side of the UART
+ will appear on the host <-> BMC LPC bus.
+Users: OpenBMC. Proposed changes should be mailed to
+ openbmc@lists.ozlabs.org
+
+What: /sys/bus/platform/drivers/aspeed-vuart*/sirq
+Date: April 2017
+Contact: Jeremy Kerr <jk@ozlabs.org>
+Description: Configures which interrupt number the host side of
+ the UART will appear on the host <-> BMC LPC bus.
+Users: OpenBMC. Proposed changes should be mailed to
+ openbmc@lists.ozlabs.org
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 9b0b3dea6326..d4c3b6c6ef92 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -954,6 +954,12 @@
must already be setup and configured. Options are not
yet supported.
+ owl,<addr>
+ Start an early, polled-mode console on a serial port
+ of an Actions Semi SoC, such as S500 or S900, at the
+ specified address. The serial port must already be
+ setup and configured. Options are not yet supported.
+
smh Use ARM semihosting calls for early console.
s3c2410,<addr>
diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt
index 10276a46ecef..419ff6c0a47f 100644
--- a/Documentation/devicetree/bindings/serial/8250.txt
+++ b/Documentation/devicetree/bindings/serial/8250.txt
@@ -20,6 +20,8 @@ Required properties:
- "fsl,16550-FIFO64"
- "fsl,ns16550"
- "ti,da830-uart"
+ - "aspeed,ast2400-vuart"
+ - "aspeed,ast2500-vuart"
- "serial" if the port type is unknown.
- reg : offset and length of the register set for the device.
- interrupts : should contain uart interrupt.
@@ -45,6 +47,7 @@ Optional properties:
property.
- tx-threshold: Specify the TX FIFO low water indication for parts with
programmable TX FIFO thresholds.
+- resets : phandle + reset specifier pairs
Note:
* fsl,ns16550:
diff --git a/Documentation/devicetree/bindings/serial/actions,owl-uart.txt b/Documentation/devicetree/bindings/serial/actions,owl-uart.txt
new file mode 100644
index 000000000000..aa873eada02d
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/actions,owl-uart.txt
@@ -0,0 +1,16 @@
+Actions Semi Owl UART
+
+Required properties:
+- compatible : "actions,s500-uart", "actions,owl-uart" for S500
+ "actions,s900-uart", "actions,owl-uart" for S900
+- reg : Offset and length of the register set for the device.
+- interrupts : Should contain UART interrupt.
+
+
+Example:
+
+ uart3: serial@b0126000 {
+ compatible = "actions,s500-uart", "actions,owl-uart";
+ reg = <0xb0126000 0x1000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt
new file mode 100644
index 000000000000..8ff65fa632fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt
@@ -0,0 +1,38 @@
+Amlogic Meson SoC UART Serial Interface
+=======================================
+
+The Amlogic Meson SoC UART Serial Interface is present on a large range
+of SoCs, and can be present either in the "Always-On" power domain or the
+"Everything-Else" power domain.
+
+The particularity of the "Always-On" Serial Interface is that the hardware
+is active since power-on and does not need any clock gating and is usable
+as very early serial console.
+
+Required properties:
+- compatible : compatible: value should be different for each SoC family as :
+ - Meson6 : "amlogic,meson6-uart"
+ - Meson8 : "amlogic,meson8-uart"
+ - Meson8b : "amlogic,meson8b-uart"
+ - GX (GXBB, GXL, GXM) : "amlogic,meson-gx-uart"
+ eventually followed by : "amlogic,meson-ao-uart" if this UART interface
+ is in the "Always-On" power domain.
+- reg : offset and length of the register set for the device.
+- interrupts : identifier to the device interrupt
+- clocks : a list of phandle + clock-specifier pairs, one for each
+ entry in clock names.
+- clocks-names :
+ * "xtal" for external xtal clock identifier
+ * "pclk" for the bus core clock, either the clk81 clock or the gate clock
+ * "baud" for the source of the baudrate generator, can be either the xtal
+ or the pclk.
+
+e.g.
+uart_A: serial@84c0 {
+ compatible = "amlogic,meson-gx-uart";
+ reg = <0x0 0x84c0 0x0 0x14>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+ /* Use xtal as baud rate clock source */
+ clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+};
diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
index 574c3a2c77d5..e6b572409cf5 100644
--- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
+++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
@@ -9,6 +9,7 @@ Optional properties:
- fsl,irda-mode : Indicate the uart supports irda mode
- fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
in DCE mode by default.
+- fsl,dma-size : Indicate the size of the DMA buffer and its periods
Please check Documentation/devicetree/bindings/serial/serial.txt
for the complete list of generic properties.
@@ -28,4 +29,5 @@ uart1: serial@73fbc000 {
interrupts = <31>;
uart-has-rtscts;
fsl,dte-mode;
+ fsl,dma-size = <1024 4>;
};
diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
index c95005efbcb8..a1252a047f78 100644
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
@@ -6,6 +6,8 @@ Required properties:
on Vybrid vf610 SoC with 8-bit register organization
- "fsl,ls1021a-lpuart" for lpuart compatible with the one integrated
on LS1021A SoC with 32-bit big-endian register organization
+ - "fsl,imx7ulp-lpuart" for lpuart compatible with the one integrated
+ on i.MX7ULP SoC with 32-bit little-endian register organization
- reg : Address and length of the register set for the device
- interrupts : Should contain uart interrupt
- clocks : phandle + clock specifier pairs, one for each entry in clock-names
diff --git a/Documentation/serial/n_gsm.txt b/Documentation/serial/n_gsm.txt
index a5d91126a8f7..875361bb7cb4 100644
--- a/Documentation/serial/n_gsm.txt
+++ b/Documentation/serial/n_gsm.txt
@@ -77,6 +77,13 @@ for example, it's possible :
6- first close all virtual ports before closing the physical port.
+Note that after closing the physical port the modem is still in multiplexing
+mode. This may prevent a successful re-opening of the port later. To avoid
+this situation either reset the modem if your hardware allows that or send
+a disconnect command frame manually before initializing the multiplexing mode
+for the second time. The byte sequence for the disconnect command frame is:
+0xf9, 0x03, 0xef, 0x03, 0xc3, 0x16, 0xf9.
+
Additional Documentation
------------------------
More practical details on the protocol and how it's supported by industrial
diff --git a/MAINTAINERS b/MAINTAINERS
index 209abdaab854..d2363ec87445 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8446,7 +8446,7 @@ T: git git://git.monstr.eu/linux-2.6-microblaze.git
S: Supported
F: arch/microblaze/
-MICROCHIP / ATMEL AT91 / AT32 SERIAL DRIVER
+MICROCHIP / ATMEL AT91 SERIAL DRIVER
M: Richard Genoud <richard.genoud@gmail.com>
S: Maintained
F: drivers/tty/serial/atmel_serial.c
diff --git a/arch/alpha/include/uapi/asm/ioctls.h b/arch/alpha/include/uapi/asm/ioctls.h
index f30c94ae1bdb..ff67b8373bf7 100644
--- a/arch/alpha/include/uapi/asm/ioctls.h
+++ b/arch/alpha/include/uapi/asm/ioctls.h
@@ -100,6 +100,7 @@
#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
+#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index de8cba121013..70d52e9bb575 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -387,19 +387,6 @@ static int activate(struct tty_port *port, struct tty_struct *tty)
}
state->xmit.head = state->xmit.tail = 0;
-
- /*
- * Set up the tty->alt_speed kludge
- */
- if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- tty->alt_speed = 57600;
- if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- tty->alt_speed = 115200;
- if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
- tty->alt_speed = 230400;
- if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
- tty->alt_speed = 460800;
-
errout:
local_irq_restore(flags);
return retval;
diff --git a/arch/mips/include/uapi/asm/ioctls.h b/arch/mips/include/uapi/asm/ioctls.h
index 740219c2c894..68e19b689a00 100644
--- a/arch/mips/include/uapi/asm/ioctls.h
+++ b/arch/mips/include/uapi/asm/ioctls.h
@@ -91,6 +91,7 @@
#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
+#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */
/* I hope the range from 0x5480 on is free ... */
#define TIOCSCTTY 0x5480 /* become controlling tty */
diff --git a/arch/parisc/include/uapi/asm/ioctls.h b/arch/parisc/include/uapi/asm/ioctls.h
index b6572f051b67..674c68a5bbd0 100644
--- a/arch/parisc/include/uapi/asm/ioctls.h
+++ b/arch/parisc/include/uapi/asm/ioctls.h
@@ -60,6 +60,7 @@
#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
+#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
diff --git a/arch/powerpc/include/uapi/asm/ioctls.h b/arch/powerpc/include/uapi/asm/ioctls.h
index 49a25796a61a..bfd609a3e928 100644
--- a/arch/powerpc/include/uapi/asm/ioctls.h
+++ b/arch/powerpc/include/uapi/asm/ioctls.h
@@ -100,6 +100,7 @@
#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
+#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
diff --git a/arch/sh/include/uapi/asm/ioctls.h b/arch/sh/include/uapi/asm/ioctls.h
index c9903e56ccf4..eec7901e9e65 100644
--- a/arch/sh/include/uapi/asm/ioctls.h
+++ b/arch/sh/include/uapi/asm/ioctls.h
@@ -93,6 +93,7 @@
#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
+#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */
#define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */
#define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */
diff --git a/arch/sparc/include/uapi/asm/ioctls.h b/arch/sparc/include/uapi/asm/ioctls.h
index 06b3f6c3bb9a..6d27398632ea 100644
--- a/arch/sparc/include/uapi/asm/ioctls.h
+++ b/arch/sparc/include/uapi/asm/ioctls.h
@@ -27,7 +27,7 @@
#define TIOCGRS485 _IOR('T', 0x41, struct serial_rs485)
#define TIOCSRS485 _IOWR('T', 0x42, struct serial_rs485)
-/* Note that all the ioctls that are not available in Linux have a
+/* Note that all the ioctls that are not available in Linux have a
* double underscore on the front to: a) avoid some programs to
* think we support some ioctls under Linux (autoconfiguration stuff)
*/
@@ -88,6 +88,7 @@
#define TIOCGPTN _IOR('t', 134, unsigned int) /* Get Pty Number */
#define TIOCSPTLCK _IOW('t', 135, int) /* Lock/unlock PTY */
#define TIOCSIG _IOW('t', 136, int) /* Generate signal on Pty slave */
+#define TIOCGPTPEER _IOR('t', 137, int) /* Safely open the slave */
/* Little f */
#define FIOCLEX _IO('f', 1)
diff --git a/arch/xtensa/include/uapi/asm/ioctls.h b/arch/xtensa/include/uapi/asm/ioctls.h
index 518954e74e6d..98b004e24e85 100644
--- a/arch/xtensa/include/uapi/asm/ioctls.h
+++ b/arch/xtensa/include/uapi/asm/ioctls.h
@@ -105,6 +105,7 @@
#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
+#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */
#define TIOCSERCONFIG _IO('T', 83)
#define TIOCSERGWILD _IOR('T', 84, int)
diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile
index f02becdb3e33..8689279afdf1 100644
--- a/drivers/tty/Makefile
+++ b/drivers/tty/Makefile
@@ -1,6 +1,7 @@
obj-$(CONFIG_TTY) += tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o \
tty_buffer.o tty_port.o tty_mutex.o \
- tty_ldsem.o tty_baudrate.o tty_jobctrl.o
+ tty_ldsem.o tty_baudrate.o tty_jobctrl.o \
+ n_null.o
obj-$(CONFIG_LEGACY_PTYS) += pty.o
obj-$(CONFIG_UNIX98_PTYS) += pty.o
obj-$(CONFIG_AUDIT) += tty_audit.o
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index dea16bb8c46a..9820e20993db 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -570,18 +570,6 @@ static int startup(struct tty_struct *tty, struct serial_state *info)
info->xmit.head = info->xmit.tail = 0;
/*
- * Set up the tty->alt_speed kludge
- */
- if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- tty->alt_speed = 57600;
- if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- tty->alt_speed = 115200;
- if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
- tty->alt_speed = 230400;
- if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
- tty->alt_speed = 460800;
-
- /*
* and set the speed of the serial port
*/
change_speed(tty, info, NULL);
@@ -1084,14 +1072,9 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state,
check_and_exit:
if (tty_port_initialized(port)) {
if (change_spd) {
- if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- tty->alt_speed = 57600;
- if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- tty->alt_speed = 115200;
- if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
- tty->alt_speed = 230400;
- if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
- tty->alt_speed = 460800;
+ /* warn about deprecation unless clearing */
+ if (new_serial.flags & ASYNC_SPD_MASK)
+ dev_warn_ratelimited(tty->dev, "use of SPD flags is deprecated\n");
change_speed(tty, state, NULL);
}
} else
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c
index 104f09c58163..d272bc4e7fb5 100644
--- a/drivers/tty/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -1975,18 +1975,6 @@ static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty)
cflag = tty->termios.c_cflag;
iflag = tty->termios.c_iflag;
- /*
- * Set up the tty->alt_speed kludge
- */
- if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- tty->alt_speed = 57600;
- if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- tty->alt_speed = 115200;
- if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
- tty->alt_speed = 230400;
- if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
- tty->alt_speed = 460800;
-
card = info->card;
channel = info->line - card->first_line;
@@ -2295,12 +2283,16 @@ cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty,
struct serial_struct __user *new_info)
{
struct serial_struct new_serial;
+ int old_flags;
int ret;
if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
return -EFAULT;
mutex_lock(&info->port.mutex);
+
+ old_flags = info->port.flags;
+
if (!capable(CAP_SYS_ADMIN)) {
if (new_serial.close_delay != info->port.close_delay ||
new_serial.baud_base != info->baud ||
@@ -2332,6 +2324,11 @@ cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty,
check_and_exit:
if (tty_port_initialized(&info->port)) {
+ if ((new_serial.flags ^ old_flags) & ASYNC_SPD_MASK) {
+ /* warn about deprecation unless clearing */
+ if (new_serial.flags & ASYNC_SPD_MASK)
+ dev_warn_ratelimited(tty->dev, "use of SPD flags is deprecated\n");
+ }
cy_set_line_char(info, tty);
ret = 0;
} else {
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 99bb875178d7..423e28ec27fb 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -1242,8 +1242,7 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
free_irq(irq, hvcsd);
return;
} else if (hvcsd->port.count < 0) {
- printk(KERN_ERR "HVCS: vty-server@%X open_count: %d"
- " is missmanaged.\n",
+ printk(KERN_ERR "HVCS: vty-server@%X open_count: %d is mismanaged.\n",
hvcsd->vdev->unit_address, hvcsd->port.count);
}
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 2667a205a5ab..363a8ca824ad 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2015,6 +2015,33 @@ static void gsm_error(struct gsm_mux *gsm,
gsm->io_error++;
}
+static int gsm_disconnect(struct gsm_mux *gsm)
+{
+ struct gsm_dlci *dlci = gsm->dlci[0];
+ struct gsm_control *gc;
+
+ if (!dlci)
+ return 0;
+
+ /* In theory disconnecting DLCI 0 is sufficient but for some
+ modems this is apparently not the case. */
+ gc = gsm_control_send(gsm, CMD_CLD, NULL, 0);
+ if (gc)
+ gsm_control_wait(gsm, gc);
+
+ del_timer_sync(&gsm->t2_timer);
+ /* Now we are sure T2 has stopped */
+
+ gsm_dlci_begin_close(dlci);
+ wait_event_interruptible(gsm->event,
+ dlci->state == DLCI_CLOSED);
+
+ if (signal_pending(current))
+ return -EINTR;
+
+ return 0;
+}
+
/**
* gsm_cleanup_mux - generic GSM protocol cleanup
* @gsm: our mux
@@ -2029,7 +2056,6 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm)
int i;
struct gsm_dlci *dlci = gsm->dlci[0];
struct gsm_msg *txq, *ntxq;
- struct gsm_control *gc;
gsm->dead = 1;
@@ -2045,21 +2071,11 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm)
if (i == MAX_MUX)
return;
- /* In theory disconnecting DLCI 0 is sufficient but for some
- modems this is apparently not the case. */
- if (dlci) {
- gc = gsm_control_send(gsm, CMD_CLD, NULL, 0);
- if (gc)
- gsm_control_wait(gsm, gc);
- }
del_timer_sync(&gsm->t2_timer);
/* Now we are sure T2 has stopped */
- if (dlci) {
+ if (dlci)
dlci->dead = 1;
- gsm_dlci_begin_close(dlci);
- wait_event_interruptible(gsm->event,
- dlci->state == DLCI_CLOSED);
- }
+
/* Free up any link layer users */
mutex_lock(&gsm->mutex);
for (i = 0; i < NUM_DLCI; i++)
@@ -2519,12 +2535,12 @@ static int gsmld_config(struct tty_struct *tty, struct gsm_mux *gsm,
*/
if (need_close || need_restart) {
- gsm_dlci_begin_close(gsm->dlci[0]);
- /* This will timeout if the link is down due to N2 expiring */
- wait_event_interruptible(gsm->event,
- gsm->dlci[0]->state == DLCI_CLOSED);
- if (signal_pending(current))
- return -EINTR;
+ int ret;
+
+ ret = gsm_disconnect(gsm);
+
+ if (ret)
+ return ret;
}
if (need_restart)
gsm_cleanup_mux(gsm);
diff --git a/drivers/tty/n_null.c b/drivers/tty/n_null.c
new file mode 100644
index 000000000000..d63261c36e42
--- /dev/null
+++ b/drivers/tty/n_null.c
@@ -0,0 +1,80 @@
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+
+/*
+ * n_null.c - Null line discipline used in the failure path
+ *
+ * Copyright (C) Intel 2017
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+static int n_null_open(struct tty_struct *tty)
+{
+ return 0;
+}
+
+static void n_null_close(struct tty_struct *tty)
+{
+}
+
+static ssize_t n_null_read(struct tty_struct *tty, struct file *file,
+ unsigned char __user * buf, size_t nr)
+{
+ return -EOPNOTSUPP;
+}
+
+static ssize_t n_null_write(struct tty_struct *tty, struct file *file,
+ const unsigned char *buf, size_t nr)
+{
+ return -EOPNOTSUPP;
+}
+
+static void n_null_receivebuf(struct tty_struct *tty,
+ const unsigned char *cp, char *fp,
+ int cnt)
+{
+}
+
+static struct tty_ldisc_ops null_ldisc = {
+ .owner = THIS_MODULE,
+ .magic = TTY_LDISC_MAGIC,
+ .name = "n_null",
+ .open = n_null_open,
+ .close = n_null_close,
+ .read = n_null_read,
+ .write = n_null_write,
+ .receive_buf = n_null_receivebuf
+};
+
+static int __init n_null_init(void)
+{
+ BUG_ON(tty_register_ldisc(N_NULL, &null_ldisc));
+ return 0;
+}
+
+static void __exit n_null_exit(void)
+{
+ tty_unregister_ldisc(N_NULL);
+}
+
+module_init(n_null_init);
+module_exit(n_null_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alan Cox");
+MODULE_ALIAS_LDISC(N_NULL);
+MODULE_DESCRIPTION("Null ldisc driver");
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 65799575c666..d1399aac05a1 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -24,6 +24,9 @@
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/poll.h>
+#include <linux/mount.h>
+#include <linux/file.h>
+#include <linux/ioctl.h>
#undef TTY_DEBUG_HANGUP
#ifdef TTY_DEBUG_HANGUP
@@ -66,8 +69,13 @@ static void pty_close(struct tty_struct *tty, struct file *filp)
#ifdef CONFIG_UNIX98_PTYS
if (tty->driver == ptm_driver) {
mutex_lock(&devpts_mutex);
- if (tty->link->driver_data)
- devpts_pty_kill(tty->link->driver_data);
+ if (tty->link->driver_data) {
+ struct path *path = tty->link->driver_data;
+
+ devpts_pty_kill(path->dentry);
+ path_put(path);
+ kfree(path);
+ }
mutex_unlock(&devpts_mutex);
}
#endif
@@ -440,6 +448,48 @@ err:
return retval;
}
+/**
+ * pty_open_peer - open the peer of a pty
+ * @tty: the peer of the pty being opened
+ *
+ * Open the cached dentry in tty->link, providing a safe way for userspace
+ * to get the slave end of a pty (where they have the master fd and cannot
+ * access or trust the mount namespace /dev/pts was mounted inside).
+ */
+static struct file *pty_open_peer(struct tty_struct *tty, int flags)
+{
+ if (tty->driver->subtype != PTY_TYPE_MASTER)
+ return ERR_PTR(-EIO);
+ return dentry_open(tty->link->driver_data, flags, current_cred());
+}
+
+static int pty_get_peer(struct tty_struct *tty, int flags)
+{
+ int fd = -1;
+ struct file *filp = NULL;
+ int retval = -EINVAL;
+
+ fd = get_unused_fd_flags(0);
+ if (fd < 0) {
+ retval = fd;
+ goto err;
+ }
+
+ filp = pty_open_peer(tty, flags);
+ if (IS_ERR(filp)) {
+ retval = PTR_ERR(filp);
+ goto err_put;
+ }
+
+ fd_install(fd, filp);
+ return fd;
+
+err_put:
+ put_unused_fd(fd);
+err:
+ return retval;
+}
+
static void pty_cleanup(struct tty_struct *tty)
{
tty_port_put(tty->port);
@@ -481,6 +531,16 @@ static int pty_bsd_ioctl(struct tty_struct *tty,
return -ENOIOCTLCMD;
}
+static long pty_bsd_compat_ioctl(struct tty_struct *tty,
+ unsigned int cmd, unsigned long arg)
+{
+ /*
+ * PTY ioctls don't require any special translation between 32-bit and
+ * 64-bit userspace, they are already compatible.
+ */
+ return pty_bsd_ioctl(tty, cmd, arg);
+}
+
static int legacy_count = CONFIG_LEGACY_PTY_COUNT;
/*
* not really modular, but the easiest way to keep compat with existing
@@ -502,6 +562,7 @@ static const struct tty_operations master_pty_ops_bsd = {
.chars_in_buffer = pty_chars_in_buffer,
.unthrottle = pty_unthrottle,
.ioctl = pty_bsd_ioctl,
+ .compat_ioctl = pty_bsd_compat_ioctl,
.cleanup = pty_cleanup,
.resize = pty_resize,
.remove = pty_remove
@@ -602,6 +663,8 @@ static int pty_unix98_ioctl(struct tty_struct *tty,
return pty_get_pktmode(tty, (int __user *)arg);
case TIOCGPTN: /* Get PT Number */
return put_user(tty->index, (unsigned int __user *)arg);
+ case TIOCGPTPEER: /* Open the other end */
+ return pty_get_peer(tty, (int) arg);
case TIOCSIG: /* Send signal to other side of pty */
return pty_signal(tty, (int) arg);
}
@@ -609,6 +672,16 @@ static int pty_unix98_ioctl(struct tty_struct *tty,
return -ENOIOCTLCMD;
}
+static long pty_unix98_compat_ioctl(struct tty_struct *tty,
+ unsigned int cmd, unsigned long arg)
+{
+ /*
+ * PTY ioctls don't require any special translation between 32-bit and
+ * 64-bit userspace, they are already compatible.
+ */
+ return pty_unix98_ioctl(tty, cmd, arg);
+}
+
/**
* ptm_unix98_lookup - find a pty master
* @driver: ptm driver
@@ -681,6 +754,7 @@ static const struct tty_operations ptm_unix98_ops = {
.chars_in_buffer = pty_chars_in_buffer,
.unthrottle = pty_unthrottle,
.ioctl = pty_unix98_ioctl,
+ .compat_ioctl = pty_unix98_compat_ioctl,
.resize = pty_resize,
.cleanup = pty_cleanup
};
@@ -718,6 +792,7 @@ static int ptmx_open(struct inode *inode, struct file *filp)
{
struct pts_fs_info *fsi;
struct tty_struct *tty;
+ struct path *pts_path;
struct dentry *dentry;
int retval;
int index;
@@ -771,16 +846,26 @@ static int ptmx_open(struct inode *inode, struct file *filp)
retval = PTR_ERR(dentry);
goto err_release;
}
- tty->link->driver_data = dentry;
+ /* We need to cache a fake path for TIOCGPTPEER. */
+ pts_path = kmalloc(sizeof(struct path), GFP_KERNEL);
+ if (!pts_path)
+ goto err_release;
+ pts_path->mnt = filp->f_path.mnt;
+ pts_path->dentry = dentry;
+ path_get(pts_path);
+ tty->link->driver_data = pts_path;
retval = ptm_driver->ops->open(tty, filp);
if (retval)
- goto err_release;
+ goto err_path_put;
tty_debug_hangup(tty, "opening (count=%d)\n", tty->count);
tty_unlock(tty);
return 0;
+err_path_put:
+ path_put(pts_path);
+ kfree(pts_path);
err_release:
tty_unlock(tty);
// This will also put-ref the fsi
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index b51a877da986..20d79a6007d5 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -947,18 +947,6 @@ static int rp_open(struct tty_struct *tty, struct file *filp)
tty_port_set_initialized(&info->port, 1);
- /*
- * Set up the tty->alt_speed kludge
- */
- if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI)
- tty->alt_speed = 57600;
- if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI)
- tty->alt_speed = 115200;
- if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI)
- tty->alt_speed = 230400;
- if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
- tty->alt_speed = 460800;
-
configure_r_port(tty, info, NULL);
if (C_BAUD(tty)) {
sSetDTR(cp);
@@ -1219,23 +1207,20 @@ static int set_config(struct tty_struct *tty, struct r_port *info,
return -EPERM;
}
info->flags = ((info->flags & ~ROCKET_USR_MASK) | (new_serial.flags & ROCKET_USR_MASK));
- configure_r_port(tty, info, NULL);
mutex_unlock(&info->port.mutex);
return 0;
}
+ if ((new_serial.flags ^ info->flags) & ROCKET_SPD_MASK) {
+ /* warn about deprecation, unless clearing */
+ if (new_serial.flags & ROCKET_SPD_MASK)
+ dev_warn_ratelimited(tty->dev, "use of SPD flags is deprecated\n");
+ }
+
info->flags = ((info->flags & ~ROCKET_FLAGS) | (new_serial.flags & ROCKET_FLAGS));
info->port.close_delay = new_serial.close_delay;
info->port.closing_wait = new_serial.closing_wait;
- if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_HI)
- tty->alt_speed = 57600;
- if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_VHI)
- tty->alt_speed = 115200;
- if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_SHI)
- tty->alt_speed = 230400;
- if ((info->flags & ROCKET_SPD_MASK) == ROCKET_SPD_WARP)
- tty->alt_speed = 460800;
mutex_unlock(&info->port.mutex);
configure_r_port(tty, info, NULL);
diff --git a/drivers/tty/serdev/serdev-ttyport.c b/drivers/tty/serdev/serdev-ttyport.c
index d0a021c93986..302018d67efa 100644
--- a/drivers/tty/serdev/serdev-ttyport.c
+++ b/drivers/tty/serdev/serdev-ttyport.c
@@ -148,7 +148,7 @@ static unsigned int ttyport_set_baudrate(struct serdev_controller *ctrl, unsigne
/* tty_set_termios() return not checked as it is always 0 */
tty_set_termios(tty, &ktermios);
- return speed;
+ return ktermios.c_ospeed;
}
static void ttyport_set_flow_control(struct serdev_controller *ctrl, bool enable)
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index ce8d4ffcc425..b2bdc35f7495 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -81,6 +81,9 @@ struct serial8250_config {
#define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */
#define UART_CAP_RPM (1 << 15) /* Runtime PM is active while idle */
#define UART_CAP_IRDA (1 << 16) /* UART supports IrDA line discipline */
+#define UART_CAP_MINI (1 << 17) /* Mini UART on BCM283X family lacks:
+ * STOP PARITY EPAR SPAR WLEN5 WLEN6
+ */
#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */
#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
new file mode 100644
index 000000000000..822be4906763
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -0,0 +1,323 @@
+/*
+ * Serial Port driver for Aspeed VUART device
+ *
+ * Copyright (C) 2016 Jeremy Kerr <jk@ozlabs.org>, IBM Corp.
+ * Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/clk.h>
+
+#include "8250.h"
+
+#define ASPEED_VUART_GCRA 0x20
+#define ASPEED_VUART_GCRA_VUART_EN BIT(0)
+#define ASPEED_VUART_GCRA_DISABLE_HOST_TX_DISCARD BIT(5)
+#define ASPEED_VUART_GCRB 0x24
+#define ASPEED_VUART_GCRB_HOST_SIRQ_MASK GENMASK(7, 4)
+#define ASPEED_VUART_GCRB_HOST_SIRQ_SHIFT 4
+#define ASPEED_VUART_ADDRL 0x28
+#define ASPEED_VUART_ADDRH 0x2c
+
+struct aspeed_vuart {
+ struct device *dev;
+ void __iomem *regs;
+ struct clk *clk;
+ int line;
+};
+
+/*
+ * The VUART is basically two UART 'front ends' connected by their FIFO
+ * (no actual serial line in between). One is on the BMC side (management
+ * controller) and one is on the host CPU side.
+ *
+ * It allows the BMC to provide to the host a "UART" that pipes into
+ * the BMC itself and can then be turned by the BMC into a network console
+ * of some sort for example.
+ *
+ * This driver is for the BMC side. The sysfs files allow the BMC
+ * userspace which owns the system configuration policy, to specify
+ * at what IO port and interrupt number the host side will appear
+ * to the host on the Host <-> BMC LPC bus. It could be different on a
+ * different system (though most of them use 3f8/4).
+ */
+
+static ssize_t lpc_address_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct aspeed_vuart *vuart = dev_get_drvdata(dev);
+ u16 addr;
+
+ addr = (readb(vuart->regs + ASPEED_VUART_ADDRH) << 8) |
+ (readb(vuart->regs + ASPEED_VUART_ADDRL));
+
+ return snprintf(buf, PAGE_SIZE - 1, "0x%x\n", addr);
+}
+
+static ssize_t lpc_address_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct aspeed_vuart *vuart = dev_get_drvdata(dev);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 0, &val);
+ if (err)
+ return err;
+
+ writeb(val >> 8, vuart->regs + ASPEED_VUART_ADDRH);
+ writeb(val >> 0, vuart->regs + ASPEED_VUART_ADDRL);
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(lpc_address);
+
+static ssize_t sirq_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct aspeed_vuart *vuart = dev_get_drvdata(dev);
+ u8 reg;
+
+ reg = readb(vuart->regs + ASPEED_VUART_GCRB);
+ reg &= ASPEED_VUART_GCRB_HOST_SIRQ_MASK;
+ reg >>= ASPEED_VUART_GCRB_HOST_SIRQ_SHIFT;
+
+ return snprintf(buf, PAGE_SIZE - 1, "%u\n", reg);
+}
+
+static ssize_t sirq_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct aspeed_vuart *vuart = dev_get_drvdata(dev);
+ unsigned long val;
+ int err;
+ u8 reg;
+
+ err = kstrtoul(buf, 0, &val);
+ if (err)
+ return err;
+
+ val <<= ASPEED_VUART_GCRB_HOST_SIRQ_SHIFT;
+ val &= ASPEED_VUART_GCRB_HOST_SIRQ_MASK;
+
+ reg = readb(vuart->regs + ASPEED_VUART_GCRB);
+ reg &= ~ASPEED_VUART_GCRB_HOST_SIRQ_MASK;
+ reg |= val;
+ writeb(reg, vuart->regs + ASPEED_VUART_GCRB);
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(sirq);
+
+static struct attribute *aspeed_vuart_attrs[] = {
+ &dev_attr_sirq.attr,
+ &dev_attr_lpc_address.attr,
+ NULL,
+};
+
+static const struct attribute_group aspeed_vuart_attr_group = {
+ .attrs = aspeed_vuart_attrs,
+};
+
+static void aspeed_vuart_set_enabled(struct aspeed_vuart *vuart, bool enabled)
+{
+ u8 reg = readb(vuart->regs + ASPEED_VUART_GCRA);
+
+ if (enabled)
+ reg |= ASPEED_VUART_GCRA_VUART_EN;
+ else
+ reg &= ~ASPEED_VUART_GCRA_VUART_EN;
+
+ writeb(reg, vuart->regs + ASPEED_VUART_GCRA);
+}
+
+static void aspeed_vuart_set_host_tx_discard(struct aspeed_vuart *vuart,
+ bool discard)
+{
+ u8 reg;
+
+ reg = readb(vuart->regs + ASPEED_VUART_GCRA);
+
+ /* If the DISABLE_HOST_TX_DISCARD bit is set, discard is disabled */
+ if (!discard)
+ reg |= ASPEED_VUART_GCRA_DISABLE_HOST_TX_DISCARD;
+ else
+ reg &= ~ASPEED_VUART_GCRA_DISABLE_HOST_TX_DISCARD;
+
+ writeb(reg, vuart->regs + ASPEED_VUART_GCRA);
+}
+
+static int aspeed_vuart_startup(struct uart_port *uart_port)
+{
+ struct uart_8250_port *uart_8250_port = up_to_u8250p(uart_port);
+ struct aspeed_vuart *vuart = uart_8250_port->port.private_data;
+ int rc;
+
+ rc = serial8250_do_startup(uart_port);
+ if (rc)
+ return rc;
+
+ aspeed_vuart_set_host_tx_discard(vuart, false);
+
+ return 0;
+}
+
+static void aspeed_vuart_shutdown(struct uart_port *uart_port)
+{
+ struct uart_8250_port *uart_8250_port = up_to_u8250p(uart_port);
+ struct aspeed_vuart *vuart = uart_8250_port->port.private_data;
+
+ aspeed_vuart_set_host_tx_discard(vuart, true);
+
+ serial8250_do_shutdown(uart_port);
+}
+
+static int aspeed_vuart_probe(struct platform_device *pdev)
+{
+ struct uart_8250_port port;
+ struct aspeed_vuart *vuart;
+ struct device_node *np;
+ struct resource *res;
+ u32 clk, prop;
+ int rc;
+
+ np = pdev->dev.of_node;
+
+ vuart = devm_kzalloc(&pdev->dev, sizeof(*vuart), GFP_KERNEL);
+ if (!vuart)
+ return -ENOMEM;
+
+ vuart->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ vuart->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(vuart->regs))
+ return PTR_ERR(vuart->regs);
+
+ memset(&port, 0, sizeof(port));
+ port.port.private_data = vuart;
+ port.port.membase = vuart->regs;
+ port.port.mapbase = res->start;
+ port.port.mapsize = resource_size(res);
+ port.port.startup = aspeed_vuart_startup;
+ port.port.shutdown = aspeed_vuart_shutdown;
+ port.port.dev = &pdev->dev;
+
+ rc = sysfs_create_group(&vuart->dev->kobj, &aspeed_vuart_attr_group);
+ if (rc < 0)
+ return rc;
+
+ if (of_property_read_u32(np, "clock-frequency", &clk)) {
+ vuart->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(vuart->clk)) {
+ dev_warn(&pdev->dev,
+ "clk or clock-frequency not defined\n");
+ return PTR_ERR(vuart->clk);
+ }
+
+ rc = clk_prepare_enable(vuart->clk);
+ if (rc < 0)
+ return rc;
+
+ clk = clk_get_rate(vuart->clk);
+ }
+
+ /* If current-speed was set, then try not to change it. */
+ if (of_property_read_u32(np, "current-speed", &prop) == 0)
+ port.port.custom_divisor = clk / (16 * prop);
+
+ /* Check for shifted address mapping */
+ if (of_property_read_u32(np, "reg-offset", &prop) == 0)
+ port.port.mapbase += prop;
+
+ /* Check for registers offset within the devices address range */
+ if (of_property_read_u32(np, "reg-shift", &prop) == 0)
+ port.port.regshift = prop;
+
+ /* Check for fifo size */
+ if (of_property_read_u32(np, "fifo-size", &prop) == 0)
+ port.port.fifosize = prop;
+
+ /* Check for a fixed line number */
+ rc = of_alias_get_id(np, "serial");
+ if (rc >= 0)
+ port.port.line = rc;
+
+ port.port.irq = irq_of_parse_and_map(np, 0);
+ port.port.irqflags = IRQF_SHARED;
+ port.port.iotype = UPIO_MEM;
+ port.port.type = PORT_16550A;
+ port.port.uartclk = clk;
+ port.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF
+ | UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_NO_THRE_TEST;
+
+ if (of_property_read_bool(np, "no-loopback-test"))
+ port.port.flags |= UPF_SKIP_TEST;
+
+ if (port.port.fifosize)
+ port.capabilities = UART_CAP_FIFO;
+
+ if (of_property_read_bool(np, "auto-flow-control"))
+ port.capabilities |= UART_CAP_AFE;
+
+ rc = serial8250_register_8250_port(&port);
+ if (rc < 0)
+ goto err_clk_disable;
+
+ vuart->line = rc;
+
+ aspeed_vuart_set_enabled(vuart, true);
+ aspeed_vuart_set_host_tx_discard(vuart, true);
+ platform_set_drvdata(pdev, vuart);
+
+ return 0;
+
+err_clk_disable:
+ clk_disable_unprepare(vuart->clk);
+ irq_dispose_mapping(port.port.irq);
+ return rc;
+}
+
+static int aspeed_vuart_remove(struct platform_device *pdev)
+{
+ struct aspeed_vuart *vuart = platform_get_drvdata(pdev);
+
+ aspeed_vuart_set_enabled(vuart, false);
+ serial8250_unregister_port(vuart->line);
+ sysfs_remove_group(&vuart->dev->kobj, &aspeed_vuart_attr_group);
+ clk_disable_unprepare(vuart->clk);
+
+ return 0;
+}
+
+static const struct of_device_id aspeed_vuart_table[] = {
+ { .compatible = "aspeed,ast2400-vuart" },
+ { .compatible = "aspeed,ast2500-vuart" },
+ { },
+};
+
+static struct platform_driver aspeed_vuart_driver = {
+ .driver = {
+ .name = "aspeed-vuart",
+ .of_match_table = aspeed_vuart_table,
+ },
+ .probe = aspeed_vuart_probe,
+ .remove = aspeed_vuart_remove,
+};
+
+module_platform_driver(aspeed_vuart_driver);
+
+MODULE_AUTHOR("Jeremy Kerr <jk@ozlabs.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Driver for Aspeed VUART device");
diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c
index e10f1244409b..a23c7da42ea8 100644
--- a/drivers/tty/serial/8250/8250_bcm2835aux.c
+++ b/drivers/tty/serial/8250/8250_bcm2835aux.c
@@ -39,7 +39,7 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev)
/* initialize data */
spin_lock_init(&data->uart.port.lock);
- data->uart.capabilities = UART_CAP_FIFO;
+ data->uart.capabilities = UART_CAP_FIFO | UART_CAP_MINI;
data->uart.port.dev = &pdev->dev;
data->uart.port.regshift = 2;
data->uart.port.type = PORT_16550;
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 1aab3010fbfa..b5def356af63 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1043,24 +1043,13 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
if (up->dl_write)
uart->dl_write = up->dl_write;
- if (uart->port.type != PORT_8250_CIR) {
- if (serial8250_isa_config != NULL)
- serial8250_isa_config(0, &uart->port,
- &uart->capabilities);
-
- ret = uart_add_one_port(&serial8250_reg,
- &uart->port);
- if (ret == 0)
- ret = uart->port.line;
- } else {
- dev_info(uart->port.dev,
- "skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n",
- uart->port.iobase,
- (unsigned long long)uart->port.mapbase,
- uart->port.irq);
+ if (serial8250_isa_config != NULL)
+ serial8250_isa_config(0, &uart->port,
+ &uart->capabilities);
- ret = 0;
- }
+ ret = uart_add_one_port(&serial8250_reg, &uart->port);
+ if (ret == 0)
+ ret = uart->port.line;
}
mutex_unlock(&serial_mutex);
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 1270ff163f63..a309bcffffcd 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -109,7 +109,6 @@ pci_fastcom335_setup(struct exar8250 *priv, struct pci_dev *pcidev,
u8 __iomem *p;
int err;
- port->port.flags |= UPF_EXAR_EFR;
port->port.uartclk = baud * 16;
err = default_setup(priv, pcidev, idx, offset, port);
@@ -171,19 +170,26 @@ pci_xr17c154_setup(struct exar8250 *priv, struct pci_dev *pcidev,
return default_setup(priv, pcidev, idx, offset, port);
}
-static void setup_gpio(u8 __iomem *p)
+static void setup_gpio(struct pci_dev *pcidev, u8 __iomem *p)
{
+ /*
+ * The Commtech adapters required the MPIOs to be driven low. The Exar
+ * devices will export them as GPIOs, so we pre-configure them safely
+ * as inputs.
+ */
+ u8 dir = pcidev->vendor == PCI_VENDOR_ID_EXAR ? 0xff : 0x00;
+
writeb(0x00, p + UART_EXAR_MPIOINT_7_0);
writeb(0x00, p + UART_EXAR_MPIOLVL_7_0);
writeb(0x00, p + UART_EXAR_MPIO3T_7_0);
writeb(0x00, p + UART_EXAR_MPIOINV_7_0);
- writeb(0x00, p + UART_EXAR_MPIOSEL_7_0);
+ writeb(dir, p + UART_EXAR_MPIOSEL_7_0);
writeb(0x00, p + UART_EXAR_MPIOOD_7_0);
writeb(0x00, p + UART_EXAR_MPIOINT_15_8);
writeb(0x00, p + UART_EXAR_MPIOLVL_15_8);
writeb(0x00, p + UART_EXAR_MPIO3T_15_8);
writeb(0x00, p + UART_EXAR_MPIOINV_15_8);
- writeb(0x00, p + UART_EXAR_MPIOSEL_15_8);
+ writeb(dir, p + UART_EXAR_MPIOSEL_15_8);
writeb(0x00, p + UART_EXAR_MPIOOD_15_8);
}
@@ -236,7 +242,7 @@ pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev,
if (idx == 0) {
/* Setup Multipurpose Input/Output pins. */
- setup_gpio(p);
+ setup_gpio(pcidev, p);
port->port.private_data = xr17v35x_register_gpio(pcidev);
}
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 1cbadafc6889..0cf95fddccfc 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -19,11 +19,13 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/clk.h>
+#include <linux/reset.h>
#include "8250.h"
struct of_serial_info {
struct clk *clk;
+ struct reset_control *rst;
int type;
int line;
};
@@ -132,6 +134,13 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
}
}
+ info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL);
+ if (IS_ERR(info->rst))
+ goto out;
+ ret = reset_control_deassert(info->rst);
+ if (ret)
+ goto out;
+
port->type = type;
port->uartclk = clk;
port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
@@ -229,6 +238,7 @@ static int of_platform_serial_remove(struct platform_device *ofdev)
serial8250_unregister_port(info->line);
+ reset_control_assert(info->rst);
if (info->clk)
clk_disable_unprepare(info->clk);
kfree(info);
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index e7e64913a748..833771bca0a5 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -613,6 +613,10 @@ static int omap_8250_startup(struct uart_port *port)
up->lsr_saved_flags = 0;
up->msr_saved_flags = 0;
+ /* Disable DMA for console UART */
+ if (uart_console(port))
+ up->dma = NULL;
+
if (up->dma) {
ret = serial8250_request_dma(up);
if (ret) {
@@ -782,8 +786,27 @@ unlock:
static void __dma_rx_complete(void *param)
{
- __dma_rx_do_complete(param);
- omap_8250_rx_dma(param);
+ struct uart_8250_port *p = param;
+ struct uart_8250_dma *dma = p->dma;
+ struct dma_tx_state state;
+ unsigned long flags;
+
+ spin_lock_irqsave(&p->port.lock, flags);
+
+ /*
+ * If the tx status is not DMA_COMPLETE, then this is a delayed
+ * completion callback. A previous RX timeout flush would have
+ * already pushed the data, so exit.
+ */
+ if (dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state) !=
+ DMA_COMPLETE) {
+ spin_unlock_irqrestore(&p->port.lock, flags);
+ return;
+ }
+ __dma_rx_do_complete(p);
+ omap_8250_rx_dma(p);
+
+ spin_unlock_irqrestore(&p->port.lock, flags);
}
static void omap_8250_rx_dma_flush(struct uart_8250_port *p)
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 68fd045a7025..a5fe0e66c607 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1764,6 +1764,10 @@ void serial8250_tx_chars(struct uart_8250_port *up)
if ((up->capabilities & UART_CAP_HFIFO) &&
(serial_in(up, UART_LSR) & BOTH_EMPTY) != BOTH_EMPTY)
break;
+ /* The BCM2835 MINI UART THRE bit is really a not-full bit. */
+ if ((up->capabilities & UART_CAP_MINI) &&
+ !(serial_in(up, UART_LSR) & UART_LSR_THRE))
+ break;
} while (--count > 0);
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -2228,7 +2232,7 @@ int serial8250_do_startup(struct uart_port *port)
}
}
- if (port->irq) {
+ if (port->irq && !(up->port.flags & UPF_NO_THRE_TEST)) {
unsigned char iir1;
/*
* Test for UARTs that do not reassert THRE when the
@@ -2585,6 +2589,12 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
unsigned long flags;
unsigned int baud, quot, frac = 0;
+ if (up->capabilities & UART_CAP_MINI) {
+ termios->c_cflag &= ~(CSTOPB | PARENB | PARODD | CMSPAR);
+ if ((termios->c_cflag & CSIZE) == CS5 ||
+ (termios->c_cflag & CSIZE) == CS6)
+ termios->c_cflag = (termios->c_cflag & ~CSIZE) | CS7;
+ }
cval = serial8250_compute_lcr(up, termios->c_cflag);
baud = serial8250_get_baud_rate(port, termios, old);
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 0e3f529d50e9..a1161ec0256f 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -224,6 +224,16 @@ config SERIAL_8250_ACCENT
To compile this driver as a module, choose M here: the module
will be called 8250_accent.
+config SERIAL_8250_ASPEED_VUART
+ tristate "Aspeed Virtual UART"
+ depends on SERIAL_8250
+ depends on OF
+ help
+ If you want to use the virtual UART (VUART) device on Aspeed
+ BMC platforms, enable this option. This enables the 16550A-
+ compatible device on the local LPC bus, giving a UART device
+ with no physical RS232 connections.
+
config SERIAL_8250_BOCA
tristate "Support Boca cards"
depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 2f30f9ecdb1b..a44a99a3e623 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR) += 8250_exar.o
obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o
obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o
obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o
+obj-$(CONFIG_SERIAL_8250_ASPEED_VUART) += 8250_aspeed_vuart.o
obj-$(CONFIG_SERIAL_8250_BCM2835AUX) += 8250_bcm2835aux.o
obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o
obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 5c8850f7a2a0..1f096e2bb398 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -114,32 +114,32 @@ config SERIAL_SB1250_DUART_CONSOLE
If unsure, say Y.
config SERIAL_ATMEL
- bool "AT91 / AT32 on-chip serial port support"
+ bool "AT91 on-chip serial port support"
depends on HAS_DMA
- depends on ARCH_AT91 || AVR32 || COMPILE_TEST
+ depends on ARCH_AT91 || COMPILE_TEST
select SERIAL_CORE
select SERIAL_MCTRL_GPIO if GPIOLIB
help
This enables the driver for the on-chip UARTs of the Atmel
- AT91 and AT32 processors.
+ AT91 processors.
config SERIAL_ATMEL_CONSOLE
- bool "Support for console on AT91 / AT32 serial port"
+ bool "Support for console on AT91 serial port"
depends on SERIAL_ATMEL=y
select SERIAL_CORE_CONSOLE
help
Say Y here if you wish to use an on-chip UART on a Atmel
- AT91 or AT32 processor as the system console (the system
+ AT91 processor as the system console (the system
console is the device which receives all kernel messages and
warnings and which allows logins in single user mode).
config SERIAL_ATMEL_PDC
- bool "Support DMA transfers on AT91 / AT32 serial port"
+ bool "Support DMA transfers on AT91 serial port"
depends on SERIAL_ATMEL
default y
help
Say Y here if you wish to use the PDC to do DMA transfers to
- and from the Atmel AT91 / AT32 serial port. In order to
+ and from the Atmel AT91 serial port. In order to
actually use DMA transfers, make sure that the use_dma_tx
and use_dma_rx members in the atmel_uart_data struct is set
appropriately for each port.
@@ -152,7 +152,7 @@ config SERIAL_ATMEL_TTYAT
bool "Install as device ttyATn instead of ttySn"
depends on SERIAL_ATMEL=y
help
- Say Y here if you wish to have the internal AT91 / AT32 UARTs
+ Say Y here if you wish to have the internal AT91 UARTs
appear as /dev/ttyATn (major 204, minor starting at 154)
instead of the normal /dev/ttySn (major 4, minor starting at
64). This is necessary if you also want other UARTs, such as
@@ -1688,6 +1688,25 @@ config SERIAL_MVEBU_CONSOLE
and warnings and which allows logins in single user mode)
Otherwise, say 'N'.
+config SERIAL_OWL
+ bool "Actions Semi Owl serial port support"
+ depends on ARCH_ACTIONS || COMPILE_TEST
+ select SERIAL_CORE
+ help
+ This driver is for Actions Semiconductor S500/S900 SoC's UART.
+ Say 'Y' here if you wish to use the on-board serial port.
+ Otherwise, say 'N'.
+
+config SERIAL_OWL_CONSOLE
+ bool "Console on Actions Semi Owl serial port"
+ depends on SERIAL_OWL=y
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ default y
+ help
+ Say 'Y' here if you wish to use Actions Semiconductor S500/S900 UART
+ as the system console. Only earlycon is implemented currently.
+
endmenu
config SERIAL_MCTRL_GPIO
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 53c03e005132..fe88a75d9a59 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -92,6 +92,7 @@ obj-$(CONFIG_SERIAL_STM32) += stm32-usart.o
obj-$(CONFIG_SERIAL_MVEBU_UART) += mvebu-uart.o
obj-$(CONFIG_SERIAL_PIC32) += pic32_uart.o
obj-$(CONFIG_SERIAL_MPS2_UART) += mps2-uart.o
+obj-$(CONFIG_SERIAL_OWL) += owl-uart.o
# GPIOLIB helpers for modem control lines
obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index f2f251075109..24180adb1cbb 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -697,6 +697,7 @@ static struct console amba_console = {
#define AMBA_CONSOLE NULL
#endif
+static DEFINE_MUTEX(amba_reg_lock);
static struct uart_driver amba_reg = {
.owner = THIS_MODULE,
.driver_name = "ttyAM",
@@ -749,6 +750,19 @@ static int pl010_probe(struct amba_device *dev, const struct amba_id *id)
amba_ports[i] = uap;
amba_set_drvdata(dev, uap);
+
+ mutex_lock(&amba_reg_lock);
+ if (!amba_reg.state) {
+ ret = uart_register_driver(&amba_reg);
+ if (ret < 0) {
+ mutex_unlock(&amba_reg_lock);
+ dev_err(uap->port.dev,
+ "Failed to register AMBA-PL010 driver\n");
+ return ret;
+ }
+ }
+ mutex_unlock(&amba_reg_lock);
+
ret = uart_add_one_port(&amba_reg, &uap->port);
if (ret)
amba_ports[i] = NULL;
@@ -760,12 +774,18 @@ static int pl010_remove(struct amba_device *dev)
{
struct uart_amba_port *uap = amba_get_drvdata(dev);
int i;
+ bool busy = false;
uart_remove_one_port(&amba_reg, &uap->port);
for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
if (amba_ports[i] == uap)
amba_ports[i] = NULL;
+ else if (amba_ports[i])
+ busy = true;
+
+ if (!busy)
+ uart_unregister_driver(&amba_reg);
return 0;
}
@@ -816,23 +836,14 @@ static struct amba_driver pl010_driver = {
static int __init pl010_init(void)
{
- int ret;
-
printk(KERN_INFO "Serial: AMBA driver\n");
- ret = uart_register_driver(&amba_reg);
- if (ret == 0) {
- ret = amba_driver_register(&pl010_driver);
- if (ret)
- uart_unregister_driver(&amba_reg);
- }
- return ret;
+ return amba_driver_register(&pl010_driver);
}
static void __exit pl010_exit(void)
{
amba_driver_unregister(&pl010_driver);
- uart_unregister_driver(&amba_reg);
}
module_init(pl010_init);
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index c355ac9abafc..7551cab438ff 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1,5 +1,5 @@
/*
- * Driver for Atmel AT91 / AT32 Serial ports
+ * Driver for Atmel AT91 Serial ports
* Copyright (C) 2003 Rick Bronson
*
* Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
@@ -46,6 +46,7 @@
#include <linux/err.h>
#include <linux/irq.h>
#include <linux/suspend.h>
+#include <linux/mm.h>
#include <asm/io.h>
#include <asm/ioctls.h>
@@ -118,7 +119,6 @@ struct atmel_uart_char {
/*
* at91: 6 USARTs and one DBGU port (SAM9260)
- * avr32: 4
* samx7: 3 USARTs and 5 UARTs
*/
#define ATMEL_MAX_UART 8
@@ -228,21 +228,6 @@ static inline void atmel_uart_writel(struct uart_port *port, u32 reg, u32 value)
__raw_writel(value, port->membase + reg);
}
-#ifdef CONFIG_AVR32
-
-/* AVR32 cannot handle 8 or 16bit I/O accesses but only 32bit I/O accesses */
-static inline u8 atmel_uart_read_char(struct uart_port *port)
-{
- return __raw_readl(port->membase + ATMEL_US_RHR);
-}
-
-static inline void atmel_uart_write_char(struct uart_port *port, u8 value)
-{
- __raw_writel(value, port->membase + ATMEL_US_THR);
-}
-
-#else
-
static inline u8 atmel_uart_read_char(struct uart_port *port)
{
return __raw_readb(port->membase + ATMEL_US_RHR);
@@ -253,8 +238,6 @@ static inline void atmel_uart_write_char(struct uart_port *port, u8 value)
__raw_writeb(value, port->membase + ATMEL_US_THR);
}
-#endif
-
#ifdef CONFIG_SERIAL_ATMEL_PDC
static bool atmel_use_pdc_rx(struct uart_port *port)
{
@@ -959,7 +942,7 @@ static int atmel_prepare_tx_dma(struct uart_port *port)
sg_set_page(&atmel_port->sg_tx,
virt_to_page(port->state->xmit.buf),
UART_XMIT_SIZE,
- (unsigned long)port->state->xmit.buf & ~PAGE_MASK);
+ offset_in_page(port->state->xmit.buf));
nent = dma_map_sg(port->dev,
&atmel_port->sg_tx,
1,
@@ -1141,7 +1124,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
sg_set_page(&atmel_port->sg_rx,
virt_to_page(ring->buf),
sizeof(struct atmel_uart_char) * ATMEL_SERIAL_RINGSIZE,
- (unsigned long)ring->buf & ~PAGE_MASK);
+ offset_in_page(ring->buf));
nent = dma_map_sg(port->dev,
&atmel_port->sg_rx,
1,
@@ -1655,72 +1638,56 @@ static void atmel_init_property(struct atmel_uart_port *atmel_port,
struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
- struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
-
- if (np) {
- /* DMA/PDC usage specification */
- if (of_property_read_bool(np, "atmel,use-dma-rx")) {
- if (of_property_read_bool(np, "dmas")) {
- atmel_port->use_dma_rx = true;
- atmel_port->use_pdc_rx = false;
- } else {
- atmel_port->use_dma_rx = false;
- atmel_port->use_pdc_rx = true;
- }
+
+ /* DMA/PDC usage specification */
+ if (of_property_read_bool(np, "atmel,use-dma-rx")) {
+ if (of_property_read_bool(np, "dmas")) {
+ atmel_port->use_dma_rx = true;
+ atmel_port->use_pdc_rx = false;
} else {
atmel_port->use_dma_rx = false;
- atmel_port->use_pdc_rx = false;
+ atmel_port->use_pdc_rx = true;
}
+ } else {
+ atmel_port->use_dma_rx = false;
+ atmel_port->use_pdc_rx = false;
+ }
- if (of_property_read_bool(np, "atmel,use-dma-tx")) {
- if (of_property_read_bool(np, "dmas")) {
- atmel_port->use_dma_tx = true;
- atmel_port->use_pdc_tx = false;
- } else {
- atmel_port->use_dma_tx = false;
- atmel_port->use_pdc_tx = true;
- }
+ if (of_property_read_bool(np, "atmel,use-dma-tx")) {
+ if (of_property_read_bool(np, "dmas")) {
+ atmel_port->use_dma_tx = true;
+ atmel_port->use_pdc_tx = false;
} else {
atmel_port->use_dma_tx = false;
- atmel_port->use_pdc_tx = false;
+ atmel_port->use_pdc_tx = true;
}
-
} else {
- atmel_port->use_pdc_rx = pdata->use_dma_rx;
- atmel_port->use_pdc_tx = pdata->use_dma_tx;
- atmel_port->use_dma_rx = false;
atmel_port->use_dma_tx = false;
+ atmel_port->use_pdc_tx = false;
}
-
}
static void atmel_init_rs485(struct uart_port *port,
struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
- struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
-
- if (np) {
- struct serial_rs485 *rs485conf = &port->rs485;
- u32 rs485_delay[2];
- /* rs485 properties */
- if (of_property_read_u32_array(np, "rs485-rts-delay",
- rs485_delay, 2) == 0) {
- rs485conf->delay_rts_before_send = rs485_delay[0];
- rs485conf->delay_rts_after_send = rs485_delay[1];
- rs485conf->flags = 0;
- }
- if (of_get_property(np, "rs485-rx-during-tx", NULL))
- rs485conf->flags |= SER_RS485_RX_DURING_TX;
+ struct serial_rs485 *rs485conf = &port->rs485;
+ u32 rs485_delay[2];
- if (of_get_property(np, "linux,rs485-enabled-at-boot-time",
- NULL))
- rs485conf->flags |= SER_RS485_ENABLED;
- } else {
- port->rs485 = pdata->rs485;
+ /* rs485 properties */
+ if (of_property_read_u32_array(np, "rs485-rts-delay",
+ rs485_delay, 2) == 0) {
+ rs485conf->delay_rts_before_send = rs485_delay[0];
+ rs485conf->delay_rts_after_send = rs485_delay[1];
+ rs485conf->flags = 0;
}
+ if (of_get_property(np, "rs485-rx-during-tx", NULL))
+ rs485conf->flags |= SER_RS485_RX_DURING_TX;
+
+ if (of_get_property(np, "linux,rs485-enabled-at-boot-time", NULL))
+ rs485conf->flags |= SER_RS485_ENABLED;
}
static void atmel_set_ops(struct uart_port *port)
@@ -2402,7 +2369,6 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
{
int ret;
struct uart_port *port = &atmel_port->uart;
- struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
atmel_init_property(atmel_port, pdev);
atmel_set_ops(port);
@@ -2410,24 +2376,17 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
atmel_init_rs485(port, pdev);
port->iotype = UPIO_MEM;
- port->flags = UPF_BOOT_AUTOCONF;
+ port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
port->ops = &atmel_pops;
port->fifosize = 1;
port->dev = &pdev->dev;
port->mapbase = pdev->resource[0].start;
port->irq = pdev->resource[1].start;
port->rs485_config = atmel_config_rs485;
+ port->membase = NULL;
memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring));
- if (pdata && pdata->regs) {
- /* Already mapped by setup code */
- port->membase = pdata->regs;
- } else {
- port->flags |= UPF_IOREMAP;
- port->membase = NULL;
- }
-
/* for console, the clock could already be configured */
if (!atmel_port->clk) {
atmel_port->clk = clk_get(&pdev->dev, "usart");
@@ -2460,8 +2419,6 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
return 0;
}
-struct platform_device *atmel_default_console_device; /* the serial console device */
-
#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
static void atmel_console_putchar(struct uart_port *port, int ch)
{
@@ -2594,47 +2551,6 @@ static struct console atmel_console = {
#define ATMEL_CONSOLE_DEVICE (&atmel_console)
-/*
- * Early console initialization (before VM subsystem initialized).
- */
-static int __init atmel_console_init(void)
-{
- int ret;
- if (atmel_default_console_device) {
- struct atmel_uart_data *pdata =
- dev_get_platdata(&atmel_default_console_device->dev);
- int id = pdata->num;
- struct atmel_uart_port *atmel_port = &atmel_ports[id];
-
- atmel_port->backup_imr = 0;
- atmel_port->uart.line = id;
-
- add_preferred_console(ATMEL_DEVICENAME, id, NULL);
- ret = atmel_init_port(atmel_port, atmel_default_console_device);
- if (ret)
- return ret;
- register_console(&atmel_console);
- }
-
- return 0;
-}
-
-console_initcall(atmel_console_init);
-
-/*
- * Late console initialization.
- */
-static int __init atmel_late_console_init(void)
-{
- if (atmel_default_console_device
- && !(atmel_console.flags & CON_ENABLED))
- register_console(&atmel_console);
-
- return 0;
-}
-
-core_initcall(atmel_late_console_init);
-
static inline bool atmel_is_console_port(struct uart_port *port)
{
return port->cons && port->cons->index == port->line;
@@ -2804,19 +2720,13 @@ static int atmel_serial_probe(struct platform_device *pdev)
{
struct atmel_uart_port *atmel_port;
struct device_node *np = pdev->dev.of_node;
- struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
void *data;
int ret = -ENODEV;
bool rs485_enabled;
BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1));
- if (np)
- ret = of_alias_get_id(np, "serial");
- else
- if (pdata)
- ret = pdata->num;
-
+ ret = of_alias_get_id(np, "serial");
if (ret < 0)
/* port id not found in platform data nor device-tree aliases:
* auto-enumerate it */
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 15df1ba78095..343de8c384b0 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -140,6 +140,8 @@
#define UARTBAUD_SBNS 0x00002000
#define UARTBAUD_SBR 0x00000000
#define UARTBAUD_SBR_MASK 0x1fff
+#define UARTBAUD_OSR_MASK 0x1f
+#define UARTBAUD_OSR_SHIFT 24
#define UARTSTAT_LBKDIF 0x80000000
#define UARTSTAT_RXEDGIF 0x40000000
@@ -231,12 +233,14 @@
#define DEV_NAME "ttyLP"
#define UART_NR 6
+/* IMX lpuart has four extra unused regs located at the beginning */
+#define IMX_REG_OFF 0x10
+
struct lpuart_port {
struct uart_port port;
struct clk *clk;
unsigned int txfifo_size;
unsigned int rxfifo_size;
- bool lpuart32;
bool lpuart_dma_tx_use;
bool lpuart_dma_rx_use;
@@ -258,13 +262,28 @@ struct lpuart_port {
wait_queue_head_t dma_wait;
};
+struct lpuart_soc_data {
+ char iotype;
+ u8 reg_off;
+};
+
+static const struct lpuart_soc_data vf_data = {
+ .iotype = UPIO_MEM,
+};
+
+static const struct lpuart_soc_data ls_data = {
+ .iotype = UPIO_MEM32BE,
+};
+
+static struct lpuart_soc_data imx_data = {
+ .iotype = UPIO_MEM32,
+ .reg_off = IMX_REG_OFF,
+};
+
static const struct of_device_id lpuart_dt_ids[] = {
- {
- .compatible = "fsl,vf610-lpuart",
- },
- {
- .compatible = "fsl,ls1021a-lpuart",
- },
+ { .compatible = "fsl,vf610-lpuart", .data = &vf_data, },
+ { .compatible = "fsl,ls1021a-lpuart", .data = &ls_data, },
+ { .compatible = "fsl,imx7ulp-lpuart", .data = &imx_data, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, lpuart_dt_ids);
@@ -272,14 +291,29 @@ MODULE_DEVICE_TABLE(of, lpuart_dt_ids);
/* Forward declare this for the dma callbacks*/
static void lpuart_dma_tx_complete(void *arg);
-static u32 lpuart32_read(void __iomem *addr)
+static inline u32 lpuart32_read(struct uart_port *port, u32 off)
{
- return ioread32be(addr);
+ switch (port->iotype) {
+ case UPIO_MEM32:
+ return readl(port->membase + off);
+ case UPIO_MEM32BE:
+ return ioread32be(port->membase + off);
+ default:
+ return 0;
+ }
}
-static void lpuart32_write(u32 val, void __iomem *addr)
+static inline void lpuart32_write(struct uart_port *port, u32 val,
+ u32 off)
{
- iowrite32be(val, addr);
+ switch (port->iotype) {
+ case UPIO_MEM32:
+ writel(val, port->membase + off);
+ break;
+ case UPIO_MEM32BE:
+ iowrite32be(val, port->membase + off);
+ break;
+ }
}
static void lpuart_stop_tx(struct uart_port *port)
@@ -295,9 +329,9 @@ static void lpuart32_stop_tx(struct uart_port *port)
{
unsigned long temp;
- temp = lpuart32_read(port->membase + UARTCTRL);
+ temp = lpuart32_read(port, UARTCTRL);
temp &= ~(UARTCTRL_TIE | UARTCTRL_TCIE);
- lpuart32_write(temp, port->membase + UARTCTRL);
+ lpuart32_write(port, temp, UARTCTRL);
}
static void lpuart_stop_rx(struct uart_port *port)
@@ -312,8 +346,8 @@ static void lpuart32_stop_rx(struct uart_port *port)
{
unsigned long temp;
- temp = lpuart32_read(port->membase + UARTCTRL);
- lpuart32_write(temp & ~UARTCTRL_RE, port->membase + UARTCTRL);
+ temp = lpuart32_read(port, UARTCTRL);
+ lpuart32_write(port, temp & ~UARTCTRL_RE, UARTCTRL);
}
static void lpuart_dma_tx(struct lpuart_port *sport)
@@ -512,14 +546,14 @@ static inline void lpuart32_transmit_buffer(struct lpuart_port *sport)
struct circ_buf *xmit = &sport->port.state->xmit;
unsigned long txcnt;
- txcnt = lpuart32_read(sport->port.membase + UARTWATER);
+ txcnt = lpuart32_read(&sport->port, UARTWATER);
txcnt = txcnt >> UARTWATER_TXCNT_OFF;
txcnt &= UARTWATER_COUNT_MASK;
while (!uart_circ_empty(xmit) && (txcnt < sport->txfifo_size)) {
- lpuart32_write(xmit->buf[xmit->tail], sport->port.membase + UARTDATA);
+ lpuart32_write(&sport->port, xmit->buf[xmit->tail], UARTDATA);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
sport->port.icount.tx++;
- txcnt = lpuart32_read(sport->port.membase + UARTWATER);
+ txcnt = lpuart32_read(&sport->port, UARTWATER);
txcnt = txcnt >> UARTWATER_TXCNT_OFF;
txcnt &= UARTWATER_COUNT_MASK;
}
@@ -555,10 +589,10 @@ static void lpuart32_start_tx(struct uart_port *port)
struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
unsigned long temp;
- temp = lpuart32_read(port->membase + UARTCTRL);
- lpuart32_write(temp | UARTCTRL_TIE, port->membase + UARTCTRL);
+ temp = lpuart32_read(port, UARTCTRL);
+ lpuart32_write(port, temp | UARTCTRL_TIE, UARTCTRL);
- if (lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TDRE)
+ if (lpuart32_read(port, UARTSTAT) & UARTSTAT_TDRE)
lpuart32_transmit_buffer(sport);
}
@@ -581,7 +615,7 @@ static unsigned int lpuart_tx_empty(struct uart_port *port)
static unsigned int lpuart32_tx_empty(struct uart_port *port)
{
- return (lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TC) ?
+ return (lpuart32_read(port, UARTSTAT) & UARTSTAT_TC) ?
TIOCSER_TEMT : 0;
}
@@ -593,22 +627,22 @@ static irqreturn_t lpuart_txint(int irq, void *dev_id)
spin_lock_irqsave(&sport->port.lock, flags);
if (sport->port.x_char) {
- if (sport->lpuart32)
- lpuart32_write(sport->port.x_char, sport->port.membase + UARTDATA);
+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
+ lpuart32_write(&sport->port, sport->port.x_char, UARTDATA);
else
writeb(sport->port.x_char, sport->port.membase + UARTDR);
goto out;
}
if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
- if (sport->lpuart32)
+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
lpuart32_stop_tx(&sport->port);
else
lpuart_stop_tx(&sport->port);
goto out;
}
- if (sport->lpuart32)
+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
lpuart32_transmit_buffer(sport);
else
lpuart_transmit_buffer(sport);
@@ -694,15 +728,15 @@ static irqreturn_t lpuart32_rxint(int irq, void *dev_id)
spin_lock_irqsave(&sport->port.lock, flags);
- while (!(lpuart32_read(sport->port.membase + UARTFIFO) & UARTFIFO_RXEMPT)) {
+ while (!(lpuart32_read(&sport->port, UARTFIFO) & UARTFIFO_RXEMPT)) {
flg = TTY_NORMAL;
sport->port.icount.rx++;
/*
* to clear the FE, OR, NF, FE, PE flags,
* read STAT then read DATA reg
*/
- sr = lpuart32_read(sport->port.membase + UARTSTAT);
- rx = lpuart32_read(sport->port.membase + UARTDATA);
+ sr = lpuart32_read(&sport->port, UARTSTAT);
+ rx = lpuart32_read(&sport->port, UARTDATA);
rx &= 0x3ff;
if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx))
@@ -769,18 +803,18 @@ static irqreturn_t lpuart32_int(int irq, void *dev_id)
struct lpuart_port *sport = dev_id;
unsigned long sts, rxcount;
- sts = lpuart32_read(sport->port.membase + UARTSTAT);
- rxcount = lpuart32_read(sport->port.membase + UARTWATER);
+ sts = lpuart32_read(&sport->port, UARTSTAT);
+ rxcount = lpuart32_read(&sport->port, UARTWATER);
rxcount = rxcount >> UARTWATER_RXCNT_OFF;
if (sts & UARTSTAT_RDRF || rxcount > 0)
lpuart32_rxint(irq, dev_id);
if ((sts & UARTSTAT_TDRE) &&
- !(lpuart32_read(sport->port.membase + UARTBAUD) & UARTBAUD_TDMAE))
+ !(lpuart32_read(&sport->port, UARTBAUD) & UARTBAUD_TDMAE))
lpuart_txint(irq, dev_id);
- lpuart32_write(sts, sport->port.membase + UARTSTAT);
+ lpuart32_write(&sport->port, sts, UARTSTAT);
return IRQ_HANDLED;
}
@@ -1041,7 +1075,7 @@ static unsigned int lpuart32_get_mctrl(struct uart_port *port)
unsigned int temp = 0;
unsigned long reg;
- reg = lpuart32_read(port->membase + UARTMODIR);
+ reg = lpuart32_read(port, UARTMODIR);
if (reg & UARTMODIR_TXCTSE)
temp |= TIOCM_CTS;
@@ -1076,7 +1110,7 @@ static void lpuart32_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
unsigned long temp;
- temp = lpuart32_read(port->membase + UARTMODIR) &
+ temp = lpuart32_read(port, UARTMODIR) &
~(UARTMODIR_RXRTSE | UARTMODIR_TXCTSE);
if (mctrl & TIOCM_RTS)
@@ -1085,7 +1119,7 @@ static void lpuart32_set_mctrl(struct uart_port *port, unsigned int mctrl)
if (mctrl & TIOCM_CTS)
temp |= UARTMODIR_TXCTSE;
- lpuart32_write(temp, port->membase + UARTMODIR);
+ lpuart32_write(port, temp, UARTMODIR);
}
static void lpuart_break_ctl(struct uart_port *port, int break_state)
@@ -1104,12 +1138,12 @@ static void lpuart32_break_ctl(struct uart_port *port, int break_state)
{
unsigned long temp;
- temp = lpuart32_read(port->membase + UARTCTRL) & ~UARTCTRL_SBK;
+ temp = lpuart32_read(port, UARTCTRL) & ~UARTCTRL_SBK;
if (break_state != 0)
temp |= UARTCTRL_SBK;
- lpuart32_write(temp, port->membase + UARTCTRL);
+ lpuart32_write(port, temp, UARTCTRL);
}
static void lpuart_setup_watermark(struct lpuart_port *sport)
@@ -1149,24 +1183,24 @@ static void lpuart32_setup_watermark(struct lpuart_port *sport)
unsigned long val, ctrl;
unsigned long ctrl_saved;
- ctrl = lpuart32_read(sport->port.membase + UARTCTRL);
+ ctrl = lpuart32_read(&sport->port, UARTCTRL);
ctrl_saved = ctrl;
ctrl &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_TE |
UARTCTRL_RIE | UARTCTRL_RE);
- lpuart32_write(ctrl, sport->port.membase + UARTCTRL);
+ lpuart32_write(&sport->port, ctrl, UARTCTRL);
/* enable FIFO mode */
- val = lpuart32_read(sport->port.membase + UARTFIFO);
+ val = lpuart32_read(&sport->port, UARTFIFO);
val |= UARTFIFO_TXFE | UARTFIFO_RXFE;
val |= UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH;
- lpuart32_write(val, sport->port.membase + UARTFIFO);
+ lpuart32_write(&sport->port, val, UARTFIFO);
/* set the watermark */
val = (0x1 << UARTWATER_RXWATER_OFF) | (0x0 << UARTWATER_TXWATER_OFF);
- lpuart32_write(val, sport->port.membase + UARTWATER);
+ lpuart32_write(&sport->port, val, UARTWATER);
/* Restore cr2 */
- lpuart32_write(ctrl_saved, sport->port.membase + UARTCTRL);
+ lpuart32_write(&sport->port, ctrl_saved, UARTCTRL);
}
static void rx_dma_timer_init(struct lpuart_port *sport)
@@ -1242,7 +1276,7 @@ static int lpuart32_startup(struct uart_port *port)
unsigned long temp;
/* determine FIFO size */
- temp = lpuart32_read(sport->port.membase + UARTFIFO);
+ temp = lpuart32_read(&sport->port, UARTFIFO);
sport->txfifo_size = 0x1 << (((temp >> UARTFIFO_TXSIZE_OFF) &
UARTFIFO_FIFOSIZE_MASK) - 1);
@@ -1259,10 +1293,10 @@ static int lpuart32_startup(struct uart_port *port)
lpuart32_setup_watermark(sport);
- temp = lpuart32_read(sport->port.membase + UARTCTRL);
+ temp = lpuart32_read(&sport->port, UARTCTRL);
temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE | UARTCTRL_TE);
temp |= UARTCTRL_ILIE;
- lpuart32_write(temp, sport->port.membase + UARTCTRL);
+ lpuart32_write(&sport->port, temp, UARTCTRL);
spin_unlock_irqrestore(&sport->port.lock, flags);
return 0;
@@ -1311,10 +1345,10 @@ static void lpuart32_shutdown(struct uart_port *port)
spin_lock_irqsave(&port->lock, flags);
/* disable Rx/Tx and interrupts */
- temp = lpuart32_read(port->membase + UARTCTRL);
+ temp = lpuart32_read(port, UARTCTRL);
temp &= ~(UARTCTRL_TE | UARTCTRL_RE |
UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE);
- lpuart32_write(temp, port->membase + UARTCTRL);
+ lpuart32_write(port, temp, UARTCTRL);
spin_unlock_irqrestore(&port->lock, flags);
@@ -1479,6 +1513,75 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
}
static void
+lpuart32_serial_setbrg(struct lpuart_port *sport, unsigned int baudrate)
+{
+ u32 sbr, osr, baud_diff, tmp_osr, tmp_sbr, tmp_diff, tmp;
+ u32 clk = sport->port.uartclk;
+
+ /*
+ * The idea is to use the best OSR (over-sampling rate) possible.
+ * Note, OSR is typically hard-set to 16 in other LPUART instantiations.
+ * Loop to find the best OSR value possible, one that generates minimum
+ * baud_diff iterate through the rest of the supported values of OSR.
+ *
+ * Calculation Formula:
+ * Baud Rate = baud clock / ((OSR+1) Ă— SBR)
+ */
+ baud_diff = baudrate;
+ osr = 0;
+ sbr = 0;
+
+ for (tmp_osr = 4; tmp_osr <= 32; tmp_osr++) {
+ /* calculate the temporary sbr value */
+ tmp_sbr = (clk / (baudrate * tmp_osr));
+ if (tmp_sbr == 0)
+ tmp_sbr = 1;
+
+ /*
+ * calculate the baud rate difference based on the temporary
+ * osr and sbr values
+ */
+ tmp_diff = clk / (tmp_osr * tmp_sbr) - baudrate;
+
+ /* select best values between sbr and sbr+1 */
+ tmp = clk / (tmp_osr * (tmp_sbr + 1));
+ if (tmp_diff > (baudrate - tmp)) {
+ tmp_diff = baudrate - tmp;
+ tmp_sbr++;
+ }
+
+ if (tmp_diff <= baud_diff) {
+ baud_diff = tmp_diff;
+ osr = tmp_osr;
+ sbr = tmp_sbr;
+
+ if (!baud_diff)
+ break;
+ }
+ }
+
+ /* handle buadrate outside acceptable rate */
+ if (baud_diff > ((baudrate / 100) * 3))
+ dev_warn(sport->port.dev,
+ "unacceptable baud rate difference of more than 3%%\n");
+
+ tmp = lpuart32_read(&sport->port, UARTBAUD);
+
+ if ((osr > 3) && (osr < 8))
+ tmp |= UARTBAUD_BOTHEDGE;
+
+ tmp &= ~(UARTBAUD_OSR_MASK << UARTBAUD_OSR_SHIFT);
+ tmp |= (((osr-1) & UARTBAUD_OSR_MASK) << UARTBAUD_OSR_SHIFT);
+
+ tmp &= ~UARTBAUD_SBR_MASK;
+ tmp |= sbr & UARTBAUD_SBR_MASK;
+
+ tmp &= ~(UARTBAUD_TDMAE | UARTBAUD_RDMAE);
+
+ lpuart32_write(&sport->port, tmp, UARTBAUD);
+}
+
+static void
lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
@@ -1487,11 +1590,10 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
unsigned long ctrl, old_ctrl, bd, modem;
unsigned int baud;
unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
- unsigned int sbr;
- ctrl = old_ctrl = lpuart32_read(sport->port.membase + UARTCTRL);
- bd = lpuart32_read(sport->port.membase + UARTBAUD);
- modem = lpuart32_read(sport->port.membase + UARTMODIR);
+ ctrl = old_ctrl = lpuart32_read(&sport->port, UARTCTRL);
+ bd = lpuart32_read(&sport->port, UARTBAUD);
+ modem = lpuart32_read(&sport->port, UARTMODIR);
/*
* only support CS8 and CS7, and for CS7 must enable PE.
* supported mode:
@@ -1577,21 +1679,16 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
uart_update_timeout(port, termios->c_cflag, baud);
/* wait transmit engin complete */
- while (!(lpuart32_read(sport->port.membase + UARTSTAT) & UARTSTAT_TC))
+ while (!(lpuart32_read(&sport->port, UARTSTAT) & UARTSTAT_TC))
barrier();
/* disable transmit and receive */
- lpuart32_write(old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE),
- sport->port.membase + UARTCTRL);
+ lpuart32_write(&sport->port, old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE),
+ UARTCTRL);
- sbr = sport->port.uartclk / (16 * baud);
- bd &= ~UARTBAUD_SBR_MASK;
- bd |= sbr & UARTBAUD_SBR_MASK;
- bd |= UARTBAUD_BOTHEDGE;
- bd &= ~(UARTBAUD_TDMAE | UARTBAUD_RDMAE);
- lpuart32_write(bd, sport->port.membase + UARTBAUD);
- lpuart32_write(modem, sport->port.membase + UARTMODIR);
- lpuart32_write(ctrl, sport->port.membase + UARTCTRL);
+ lpuart32_serial_setbrg(sport, baud);
+ lpuart32_write(&sport->port, modem, UARTMODIR);
+ lpuart32_write(&sport->port, ctrl, UARTCTRL);
/* restore control register */
spin_unlock_irqrestore(&sport->port.lock, flags);
@@ -1694,10 +1791,10 @@ static void lpuart_console_putchar(struct uart_port *port, int ch)
static void lpuart32_console_putchar(struct uart_port *port, int ch)
{
- while (!(lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TDRE))
+ while (!(lpuart32_read(port, UARTSTAT) & UARTSTAT_TDRE))
barrier();
- lpuart32_write(ch, port->membase + UARTDATA);
+ lpuart32_write(port, ch, UARTDATA);
}
static void
@@ -1745,18 +1842,18 @@ lpuart32_console_write(struct console *co, const char *s, unsigned int count)
spin_lock_irqsave(&sport->port.lock, flags);
/* first save CR2 and then disable interrupts */
- cr = old_cr = lpuart32_read(sport->port.membase + UARTCTRL);
+ cr = old_cr = lpuart32_read(&sport->port, UARTCTRL);
cr |= (UARTCTRL_TE | UARTCTRL_RE);
cr &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE);
- lpuart32_write(cr, sport->port.membase + UARTCTRL);
+ lpuart32_write(&sport->port, cr, UARTCTRL);
uart_console_write(&sport->port, s, count, lpuart32_console_putchar);
/* wait for transmitter finish complete and restore CR2 */
- while (!(lpuart32_read(sport->port.membase + UARTSTAT) & UARTSTAT_TC))
+ while (!(lpuart32_read(&sport->port, UARTSTAT) & UARTSTAT_TC))
barrier();
- lpuart32_write(old_cr, sport->port.membase + UARTCTRL);
+ lpuart32_write(&sport->port, old_cr, UARTCTRL);
if (locked)
spin_unlock_irqrestore(&sport->port.lock, flags);
@@ -1822,14 +1919,14 @@ lpuart32_console_get_options(struct lpuart_port *sport, int *baud,
unsigned long cr, bd;
unsigned int sbr, uartclk, baud_raw;
- cr = lpuart32_read(sport->port.membase + UARTCTRL);
+ cr = lpuart32_read(&sport->port, UARTCTRL);
cr &= UARTCTRL_TE | UARTCTRL_RE;
if (!cr)
return;
/* ok, the port was enabled */
- cr = lpuart32_read(sport->port.membase + UARTCTRL);
+ cr = lpuart32_read(&sport->port, UARTCTRL);
*parity = 'n';
if (cr & UARTCTRL_PE) {
@@ -1844,7 +1941,7 @@ lpuart32_console_get_options(struct lpuart_port *sport, int *baud,
else
*bits = 8;
- bd = lpuart32_read(sport->port.membase + UARTBAUD);
+ bd = lpuart32_read(&sport->port, UARTBAUD);
bd &= UARTBAUD_SBR_MASK;
sbr = bd;
uartclk = clk_get_rate(sport->clk);
@@ -1881,12 +1978,12 @@ static int __init lpuart_console_setup(struct console *co, char *options)
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
else
- if (sport->lpuart32)
+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
lpuart32_console_get_options(sport, &baud, &parity, &bits);
else
lpuart_console_get_options(sport, &baud, &parity, &bits);
- if (sport->lpuart32)
+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
lpuart32_setup_watermark(sport);
else
lpuart_setup_watermark(sport);
@@ -1945,12 +2042,26 @@ static int __init lpuart32_early_console_setup(struct earlycon_device *device,
if (!device->port.membase)
return -ENODEV;
+ device->port.iotype = UPIO_MEM32BE;
device->con->write = lpuart32_early_write;
return 0;
}
+static int __init lpuart32_imx_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ if (!device->port.membase)
+ return -ENODEV;
+
+ device->port.iotype = UPIO_MEM32;
+ device->port.membase += IMX_REG_OFF;
+ device->con->write = lpuart32_early_write;
+
+ return 0;
+}
OF_EARLYCON_DECLARE(lpuart, "fsl,vf610-lpuart", lpuart_early_console_setup);
OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1021a-lpuart", lpuart32_early_console_setup);
+OF_EARLYCON_DECLARE(lpuart32, "fsl,imx7ulp-lpuart", lpuart32_imx_early_console_setup);
EARLYCON_DECLARE(lpuart, lpuart_early_console_setup);
EARLYCON_DECLARE(lpuart32, lpuart32_early_console_setup);
@@ -1971,6 +2082,9 @@ static struct uart_driver lpuart_reg = {
static int lpuart_probe(struct platform_device *pdev)
{
+ const struct of_device_id *of_id = of_match_device(lpuart_dt_ids,
+ &pdev->dev);
+ const struct lpuart_soc_data *sdata = of_id->data;
struct device_node *np = pdev->dev.of_node;
struct lpuart_port *sport;
struct resource *res;
@@ -1988,25 +2102,23 @@ static int lpuart_probe(struct platform_device *pdev)
return ret;
}
sport->port.line = ret;
- sport->lpuart32 = of_device_is_compatible(np, "fsl,ls1021a-lpuart");
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
sport->port.membase = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(sport->port.membase))
return PTR_ERR(sport->port.membase);
+ sport->port.membase += sdata->reg_off;
sport->port.mapbase = res->start;
sport->port.dev = &pdev->dev;
sport->port.type = PORT_LPUART;
- sport->port.iotype = UPIO_MEM;
ret = platform_get_irq(pdev, 0);
if (ret < 0) {
dev_err(&pdev->dev, "cannot obtain irq\n");
return ret;
}
sport->port.irq = ret;
-
- if (sport->lpuart32)
+ sport->port.iotype = sdata->iotype;
+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
sport->port.ops = &lpuart32_pops;
else
sport->port.ops = &lpuart_pops;
@@ -2033,7 +2145,7 @@ static int lpuart_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, &sport->port);
- if (sport->lpuart32)
+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
lpuart_reg.cons = LPUART32_CONSOLE;
else
lpuart_reg.cons = LPUART_CONSOLE;
@@ -2086,11 +2198,11 @@ static int lpuart_suspend(struct device *dev)
struct lpuart_port *sport = dev_get_drvdata(dev);
unsigned long temp;
- if (sport->lpuart32) {
+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) {
/* disable Rx/Tx and interrupts */
- temp = lpuart32_read(sport->port.membase + UARTCTRL);
+ temp = lpuart32_read(&sport->port, UARTCTRL);
temp &= ~(UARTCTRL_TE | UARTCTRL_TIE | UARTCTRL_TCIE);
- lpuart32_write(temp, sport->port.membase + UARTCTRL);
+ lpuart32_write(&sport->port, temp, UARTCTRL);
} else {
/* disable Rx/Tx and interrupts */
temp = readb(sport->port.membase + UARTCR2);
@@ -2137,12 +2249,12 @@ static int lpuart_resume(struct device *dev)
if (sport->port.suspended && !sport->port.irq_wake)
clk_prepare_enable(sport->clk);
- if (sport->lpuart32) {
+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) {
lpuart32_setup_watermark(sport);
- temp = lpuart32_read(sport->port.membase + UARTCTRL);
+ temp = lpuart32_read(&sport->port, UARTCTRL);
temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE |
UARTCTRL_TE | UARTCTRL_ILIE);
- lpuart32_write(temp, sport->port.membase + UARTCTRL);
+ lpuart32_write(&sport->port, temp, UARTCTRL);
} else {
lpuart_setup_watermark(sport);
temp = readb(sport->port.membase + UARTCR2);
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index bbefddd92bfe..9e3162bf3bd1 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -186,6 +186,11 @@
#define UART_NR 8
+/* RX DMA buffer periods */
+#define RX_DMA_PERIODS 4
+#define RX_BUF_SIZE (PAGE_SIZE)
+
+
/* i.MX21 type uart runs on all i.mx except i.MX1 and i.MX6q */
enum imx_uart_type {
IMX1_UART,
@@ -207,9 +212,6 @@ struct imx_port {
unsigned int have_rtscts:1;
unsigned int have_rtsgpio:1;
unsigned int dte_mode:1;
- unsigned int irda_inv_rx:1;
- unsigned int irda_inv_tx:1;
- unsigned short trcv_delay; /* transceiver delay */
struct clk *clk_ipg;
struct clk *clk_per;
const struct imx_uart_data *devdata;
@@ -224,6 +226,7 @@ struct imx_port {
struct dma_chan *dma_chan_rx, *dma_chan_tx;
struct scatterlist rx_sgl, tx_sgl[2];
void *rx_buf;
+ unsigned int rx_buf_size;
struct circ_buf rx_ring;
unsigned int rx_periods;
dma_cookie_t rx_cookie;
@@ -964,8 +967,6 @@ static void imx_timeout(unsigned long data)
}
}
-#define RX_BUF_SIZE (PAGE_SIZE)
-
/*
* There are two kinds of RX DMA interrupts(such as in the MX6Q):
* [1] the RX DMA buffer is full.
@@ -1048,9 +1049,6 @@ static void dma_rx_callback(void *data)
}
}
-/* RX DMA buffer periods */
-#define RX_DMA_PERIODS 4
-
static int start_rx_dma(struct imx_port *sport)
{
struct scatterlist *sgl = &sport->rx_sgl;
@@ -1061,9 +1059,8 @@ static int start_rx_dma(struct imx_port *sport)
sport->rx_ring.head = 0;
sport->rx_ring.tail = 0;
- sport->rx_periods = RX_DMA_PERIODS;
- sg_init_one(sgl, sport->rx_buf, RX_BUF_SIZE);
+ sg_init_one(sgl, sport->rx_buf, sport->rx_buf_size);
ret = dma_map_sg(dev, sgl, 1, DMA_FROM_DEVICE);
if (ret == 0) {
dev_err(dev, "DMA mapping error for RX.\n");
@@ -1174,7 +1171,7 @@ static int imx_uart_dma_init(struct imx_port *sport)
goto err;
}
- sport->rx_buf = kzalloc(PAGE_SIZE, GFP_KERNEL);
+ sport->rx_buf = kzalloc(sport->rx_buf_size, GFP_KERNEL);
if (!sport->rx_buf) {
ret = -ENOMEM;
goto err;
@@ -1302,7 +1299,9 @@ static int imx_startup(struct uart_port *port)
imx_enable_dma(sport);
temp = readl(sport->port.membase + UCR1);
- temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN;
+ temp |= UCR1_RRDYEN | UCR1_UARTEN;
+ if (sport->have_rtscts)
+ temp |= UCR1_RTSDEN;
writel(temp, sport->port.membase + UCR1);
@@ -1340,29 +1339,13 @@ static int imx_startup(struct uart_port *port)
imx_enable_ms(&sport->port);
/*
- * If the serial port is opened for reading start RX DMA immediately
- * instead of waiting for RX FIFO interrupts. In our iMX53 the average
- * delay for the first reception dropped from approximately 35000
- * microseconds to 1000 microseconds.
+ * Start RX DMA immediately instead of waiting for RX FIFO interrupts.
+ * In our iMX53 the average delay for the first reception dropped from
+ * approximately 35000 microseconds to 1000 microseconds.
*/
if (sport->dma_is_enabled) {
- struct tty_struct *tty = sport->port.state->port.tty;
- struct tty_file_private *file_priv;
- int readcnt = 0;
-
- spin_lock(&tty->files_lock);
-
- if (!list_empty(&tty->tty_files))
- list_for_each_entry(file_priv, &tty->tty_files, list)
- if (!(file_priv->file->f_flags & O_WRONLY))
- readcnt++;
-
- spin_unlock(&tty->files_lock);
-
- if (readcnt > 0) {
- imx_disable_rx_int(sport);
- start_rx_dma(sport);
- }
+ imx_disable_rx_int(sport);
+ start_rx_dma(sport);
}
spin_unlock_irqrestore(&sport->port.lock, flags);
@@ -2053,6 +2036,7 @@ static int serial_imx_probe_dt(struct imx_port *sport,
{
struct device_node *np = pdev->dev.of_node;
int ret;
+ u32 dma_buf_size[2];
sport->devdata = of_device_get_match_data(&pdev->dev);
if (!sport->devdata)
@@ -2076,6 +2060,14 @@ static int serial_imx_probe_dt(struct imx_port *sport,
if (of_get_property(np, "rts-gpios", NULL))
sport->have_rtsgpio = 1;
+ if (!of_property_read_u32_array(np, "fsl,dma-size", dma_buf_size, 2)) {
+ sport->rx_buf_size = dma_buf_size[0] * dma_buf_size[1];
+ sport->rx_periods = dma_buf_size[1];
+ } else {
+ sport->rx_buf_size = RX_BUF_SIZE;
+ sport->rx_periods = RX_DMA_PERIODS;
+ }
+
return 0;
}
#else
diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index 60f16795d16b..42e4a4c7597f 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -286,7 +286,7 @@ static int meson_uart_startup(struct uart_port *port)
writel(val, port->membase + AML_UART_MISC);
ret = request_irq(port->irq, meson_uart_interrupt, 0,
- meson_uart_type(port), port);
+ port->name, port);
return ret;
}
@@ -298,8 +298,6 @@ static void meson_uart_change_speed(struct uart_port *port, unsigned long baud)
while (!meson_uart_tx_empty(port))
cpu_relax();
- val = readl(port->membase + AML_UART_REG5);
- val &= ~AML_UART_BAUD_MASK;
if (port->uartclk == 24000000) {
val = ((port->uartclk / 3) / baud) - 1;
val |= AML_UART_BAUD_XTAL;
@@ -355,7 +353,7 @@ static void meson_uart_set_termios(struct uart_port *port,
if (cflags & CSTOPB)
val |= AML_UART_STOP_BIN_2SB;
else
- val &= ~AML_UART_STOP_BIN_1SB;
+ val |= AML_UART_STOP_BIN_1SB;
if (cflags & CRTSCTS)
val &= ~AML_UART_TWO_WIRE_EN;
@@ -395,51 +393,25 @@ static int meson_uart_verify_port(struct uart_port *port,
return ret;
}
-static int meson_uart_res_size(struct uart_port *port)
-{
- struct platform_device *pdev = to_platform_device(port->dev);
- struct resource *res;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(port->dev, "cannot obtain I/O memory region");
- return -ENODEV;
- }
-
- return resource_size(res);
-}
-
static void meson_uart_release_port(struct uart_port *port)
{
- int size = meson_uart_res_size(port);
-
- if (port->flags & UPF_IOREMAP) {
- devm_release_mem_region(port->dev, port->mapbase, size);
- devm_iounmap(port->dev, port->membase);
- port->membase = NULL;
- }
+ devm_iounmap(port->dev, port->membase);
+ port->membase = NULL;
+ devm_release_mem_region(port->dev, port->mapbase, port->mapsize);
}
static int meson_uart_request_port(struct uart_port *port)
{
- int size = meson_uart_res_size(port);
-
- if (size < 0)
- return size;
-
- if (!devm_request_mem_region(port->dev, port->mapbase, size,
+ if (!devm_request_mem_region(port->dev, port->mapbase, port->mapsize,
dev_name(port->dev))) {
dev_err(port->dev, "Memory region busy\n");
return -EBUSY;
}
- if (port->flags & UPF_IOREMAP) {
- port->membase = devm_ioremap_nocache(port->dev,
- port->mapbase,
- size);
- if (port->membase == NULL)
- return -ENOMEM;
- }
+ port->membase = devm_ioremap_nocache(port->dev, port->mapbase,
+ port->mapsize);
+ if (!port->membase)
+ return -ENOMEM;
return 0;
}
@@ -470,6 +442,14 @@ static struct uart_ops meson_uart_ops = {
};
#ifdef CONFIG_SERIAL_MESON_CONSOLE
+static void meson_uart_enable_tx_engine(struct uart_port *port)
+{
+ u32 val;
+
+ val = readl(port->membase + AML_UART_CONTROL);
+ val |= AML_UART_TX_EN;
+ writel(val, port->membase + AML_UART_CONTROL);
+}
static void meson_console_putchar(struct uart_port *port, int ch)
{
@@ -499,7 +479,6 @@ static void meson_serial_port_write(struct uart_port *port, const char *s,
}
val = readl(port->membase + AML_UART_CONTROL);
- val |= AML_UART_TX_EN;
tmp = val & ~(AML_UART_TX_INT_EN | AML_UART_RX_INT_EN);
writel(tmp, port->membase + AML_UART_CONTROL);
@@ -538,6 +517,8 @@ static int meson_serial_console_setup(struct console *co, char *options)
if (!port || !port->membase)
return -ENODEV;
+ meson_uart_enable_tx_engine(port);
+
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -576,11 +557,16 @@ meson_serial_early_console_setup(struct earlycon_device *device, const char *opt
if (!device->port.membase)
return -ENODEV;
+ meson_uart_enable_tx_engine(&device->port);
device->con->write = meson_serial_early_console_write;
return 0;
}
+/* Legacy bindings, should be removed when no more used */
OF_EARLYCON_DECLARE(meson, "amlogic,meson-uart",
meson_serial_early_console_setup);
+/* Stable bindings */
+OF_EARLYCON_DECLARE(meson, "amlogic,meson-ao-uart",
+ meson_serial_early_console_setup);
#define MESON_SERIAL_CONSOLE (&meson_serial_console)
#else
@@ -595,11 +581,76 @@ static struct uart_driver meson_uart_driver = {
.cons = MESON_SERIAL_CONSOLE,
};
+static inline struct clk *meson_uart_probe_clock(struct device *dev,
+ const char *id)
+{
+ struct clk *clk = NULL;
+ int ret;
+
+ clk = devm_clk_get(dev, id);
+ if (IS_ERR(clk))
+ return clk;
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ dev_err(dev, "couldn't enable clk\n");
+ return ERR_PTR(ret);
+ }
+
+ devm_add_action_or_reset(dev,
+ (void(*)(void *))clk_disable_unprepare,
+ clk);
+
+ return clk;
+}
+
+/*
+ * This function gets clocks in the legacy non-stable DT bindings.
+ * This code will be remove once all the platforms switch to the
+ * new DT bindings.
+ */
+static int meson_uart_probe_clocks_legacy(struct platform_device *pdev,
+ struct uart_port *port)
+{
+ struct clk *clk = NULL;
+
+ clk = meson_uart_probe_clock(&pdev->dev, NULL);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ port->uartclk = clk_get_rate(clk);
+
+ return 0;
+}
+
+static int meson_uart_probe_clocks(struct platform_device *pdev,
+ struct uart_port *port)
+{
+ struct clk *clk_xtal = NULL;
+ struct clk *clk_pclk = NULL;
+ struct clk *clk_baud = NULL;
+
+ clk_pclk = meson_uart_probe_clock(&pdev->dev, "pclk");
+ if (IS_ERR(clk_pclk))
+ return PTR_ERR(clk_pclk);
+
+ clk_xtal = meson_uart_probe_clock(&pdev->dev, "xtal");
+ if (IS_ERR(clk_xtal))
+ return PTR_ERR(clk_xtal);
+
+ clk_baud = meson_uart_probe_clock(&pdev->dev, "baud");
+ if (IS_ERR(clk_baud))
+ return PTR_ERR(clk_baud);
+
+ port->uartclk = clk_get_rate(clk_baud);
+
+ return 0;
+}
+
static int meson_uart_probe(struct platform_device *pdev)
{
struct resource *res_mem, *res_irq;
struct uart_port *port;
- struct clk *clk;
int ret = 0;
if (pdev->dev.of_node)
@@ -625,15 +676,20 @@ static int meson_uart_probe(struct platform_device *pdev)
if (!port)
return -ENOMEM;
- clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(clk))
- return PTR_ERR(clk);
+ /* Use legacy way until all platforms switch to new bindings */
+ if (of_device_is_compatible(pdev->dev.of_node, "amlogic,meson-uart"))
+ ret = meson_uart_probe_clocks_legacy(pdev, port);
+ else
+ ret = meson_uart_probe_clocks(pdev, port);
+
+ if (ret)
+ return ret;
- port->uartclk = clk_get_rate(clk);
port->iotype = UPIO_MEM;
port->mapbase = res_mem->start;
+ port->mapsize = resource_size(res_mem);
port->irq = res_irq->start;
- port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_LOW_LATENCY;
+ port->flags = UPF_BOOT_AUTOCONF | UPF_LOW_LATENCY;
port->dev = &pdev->dev;
port->line = pdev->id;
port->type = PORT_MESON;
@@ -668,9 +724,14 @@ static int meson_uart_remove(struct platform_device *pdev)
return 0;
}
-
static const struct of_device_id meson_uart_dt_match[] = {
+ /* Legacy bindings, should be removed when no more used */
{ .compatible = "amlogic,meson-uart" },
+ /* Stable bindings */
+ { .compatible = "amlogic,meson6-uart" },
+ { .compatible = "amlogic,meson8-uart" },
+ { .compatible = "amlogic,meson8b-uart" },
+ { .compatible = "amlogic,meson-gx-uart" },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, meson_uart_dt_match);
diff --git a/drivers/tty/serial/mpsc.c b/drivers/tty/serial/mpsc.c
index 1a60a2063e75..67ffecc50e42 100644
--- a/drivers/tty/serial/mpsc.c
+++ b/drivers/tty/serial/mpsc.c
@@ -754,9 +754,10 @@ static int mpsc_alloc_ring_mem(struct mpsc_port_info *pi)
if (!dma_set_mask(pi->port.dev, 0xffffffff)) {
printk(KERN_ERR "MPSC: Inadequate DMA support\n");
rc = -ENXIO;
- } else if ((pi->dma_region = dma_alloc_noncoherent(pi->port.dev,
+ } else if ((pi->dma_region = dma_alloc_attrs(pi->port.dev,
MPSC_DMA_ALLOC_SIZE,
- &pi->dma_region_p, GFP_KERNEL))
+ &pi->dma_region_p, GFP_KERNEL,
+ DMA_ATTR_NON_CONSISTENT))
== NULL) {
printk(KERN_ERR "MPSC: Can't alloc Desc region\n");
rc = -ENOMEM;
@@ -771,8 +772,9 @@ static void mpsc_free_ring_mem(struct mpsc_port_info *pi)
pr_debug("mpsc_free_ring_mem[%d]: Freeing ring mem\n", pi->port.line);
if (pi->dma_region) {
- dma_free_noncoherent(pi->port.dev, MPSC_DMA_ALLOC_SIZE,
- pi->dma_region, pi->dma_region_p);
+ dma_free_attrs(pi->port.dev, MPSC_DMA_ALLOC_SIZE,
+ pi->dma_region, pi->dma_region_p,
+ DMA_ATTR_NON_CONSISTENT);
pi->dma_region = NULL;
pi->dma_region_p = (dma_addr_t)NULL;
}
diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c
new file mode 100644
index 000000000000..1b8008797a1b
--- /dev/null
+++ b/drivers/tty/serial/owl-uart.c
@@ -0,0 +1,135 @@
+/*
+ * Actions Semi Owl family serial console
+ *
+ * Copyright 2013 Actions Semi Inc.
+ * Author: Actions Semi, Inc.
+ *
+ * Copyright (c) 2016-2017 Andreas Färber
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#define OWL_UART_CTL 0x000
+#define OWL_UART_TXDAT 0x008
+#define OWL_UART_STAT 0x00c
+
+#define OWL_UART_CTL_TRFS_TX BIT(14)
+#define OWL_UART_CTL_EN BIT(15)
+#define OWL_UART_CTL_RXIE BIT(18)
+#define OWL_UART_CTL_TXIE BIT(19)
+
+#define OWL_UART_STAT_RIP BIT(0)
+#define OWL_UART_STAT_TIP BIT(1)
+#define OWL_UART_STAT_TFFU BIT(6)
+#define OWL_UART_STAT_TRFL_MASK (0x1f << 11)
+#define OWL_UART_STAT_UTBB BIT(17)
+
+static inline void owl_uart_write(struct uart_port *port, u32 val, unsigned int off)
+{
+ writel(val, port->membase + off);
+}
+
+static inline u32 owl_uart_read(struct uart_port *port, unsigned int off)
+{
+ return readl(port->membase + off);
+}
+
+#ifdef CONFIG_SERIAL_OWL_CONSOLE
+
+static void owl_console_putchar(struct uart_port *port, int ch)
+{
+ if (!port->membase)
+ return;
+
+ while (owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TFFU)
+ cpu_relax();
+
+ owl_uart_write(port, ch, OWL_UART_TXDAT);
+}
+
+static void owl_uart_port_write(struct uart_port *port, const char *s,
+ u_int count)
+{
+ u32 old_ctl, val;
+ unsigned long flags;
+ int locked;
+
+ local_irq_save(flags);
+
+ if (port->sysrq)
+ locked = 0;
+ else if (oops_in_progress)
+ locked = spin_trylock(&port->lock);
+ else {
+ spin_lock(&port->lock);
+ locked = 1;
+ }
+
+ old_ctl = owl_uart_read(port, OWL_UART_CTL);
+ val = old_ctl | OWL_UART_CTL_TRFS_TX;
+ /* disable IRQ */
+ val &= ~(OWL_UART_CTL_RXIE | OWL_UART_CTL_TXIE);
+ owl_uart_write(port, val, OWL_UART_CTL);
+
+ uart_console_write(port, s, count, owl_console_putchar);
+
+ /* wait until all contents have been sent out */
+ while (owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_TRFL_MASK)
+ cpu_relax();
+
+ /* clear IRQ pending */
+ val = owl_uart_read(port, OWL_UART_STAT);
+ val |= OWL_UART_STAT_TIP | OWL_UART_STAT_RIP;
+ owl_uart_write(port, val, OWL_UART_STAT);
+
+ owl_uart_write(port, old_ctl, OWL_UART_CTL);
+
+ if (locked)
+ spin_unlock(&port->lock);
+
+ local_irq_restore(flags);
+}
+
+static void owl_uart_early_console_write(struct console *co,
+ const char *s,
+ u_int count)
+{
+ struct earlycon_device *dev = co->data;
+
+ owl_uart_port_write(&dev->port, s, count);
+}
+
+static int __init
+owl_uart_early_console_setup(struct earlycon_device *device, const char *opt)
+{
+ if (!device->port.membase)
+ return -ENODEV;
+
+ device->con->write = owl_uart_early_console_write;
+
+ return 0;
+}
+OF_EARLYCON_DECLARE(owl, "actions,owl-uart",
+ owl_uart_early_console_setup);
+
+#endif /* CONFIG_SERIAL_OWL_CONSOLE */
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 42caccb5e87e..d3796dc26fa9 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -878,8 +878,7 @@ static int dma_handle_rx(struct eg20t_port *priv)
sg_dma_len(sg) = priv->trigger_level;
sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt),
- sg_dma_len(sg), (unsigned long)priv->rx_buf_virt &
- ~PAGE_MASK);
+ sg_dma_len(sg), offset_in_page(priv->rx_buf_virt));
sg_dma_address(sg) = priv->rx_buf_dma;
diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c
index fcf803ffad19..cdd2f942317c 100644
--- a/drivers/tty/serial/sccnxp.c
+++ b/drivers/tty/serial/sccnxp.c
@@ -884,14 +884,19 @@ static int sccnxp_probe(struct platform_device *pdev)
clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(clk)) {
- if (PTR_ERR(clk) == -EPROBE_DEFER) {
- ret = -EPROBE_DEFER;
+ ret = PTR_ERR(clk);
+ if (ret == -EPROBE_DEFER)
goto err_out;
- }
+ uartclk = 0;
+ } else {
+ clk_prepare_enable(clk);
+ uartclk = clk_get_rate(clk);
+ }
+
+ if (!uartclk) {
dev_notice(&pdev->dev, "Using default clock frequency\n");
uartclk = s->chip->freq_std;
- } else
- uartclk = clk_get_rate(clk);
+ }
/* Check input frequency */
if ((uartclk < s->chip->freq_min) || (uartclk > s->chip->freq_max)) {
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 13bfd5dcffce..f534a40aebde 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -954,11 +954,10 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port,
old_custom_divisor != uport->custom_divisor) {
/*
* If they're setting up a custom divisor or speed,
- * instead of clearing it, then bitch about it. No
- * need to rate-limit; it's CAP_SYS_ADMIN only.
+ * instead of clearing it, then bitch about it.
*/
if (uport->flags & UPF_SPD_MASK) {
- dev_notice(uport->dev,
+ dev_notice_ratelimited(uport->dev,
"%s sets custom speed on %s. This is deprecated.\n",
current->comm,
tty_name(port->tty));
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 71707e8e6e3f..da5ddfc14778 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1450,8 +1450,7 @@ static struct dma_chan *sci_request_dma_chan(struct uart_port *port,
chan = dma_request_slave_channel(port->dev,
dir == DMA_MEM_TO_DEV ? "tx" : "rx");
if (!chan) {
- dev_warn(port->dev,
- "dma_request_slave_channel_compat failed\n");
+ dev_warn(port->dev, "dma_request_slave_channel failed\n");
return NULL;
}
@@ -1558,7 +1557,16 @@ static void sci_free_dma(struct uart_port *port)
if (s->chan_rx)
sci_rx_dma_release(s, false);
}
-#else
+
+static void sci_flush_buffer(struct uart_port *port)
+{
+ /*
+ * In uart_flush_buffer(), the xmit circular buffer has just been
+ * cleared, so we have to reset tx_dma_len accordingly.
+ */
+ to_sci_port(port)->tx_dma_len = 0;
+}
+#else /* !CONFIG_SERIAL_SH_SCI_DMA */
static inline void sci_request_dma(struct uart_port *port)
{
}
@@ -1566,7 +1574,9 @@ static inline void sci_request_dma(struct uart_port *port)
static inline void sci_free_dma(struct uart_port *port)
{
}
-#endif
+
+#define sci_flush_buffer NULL
+#endif /* !CONFIG_SERIAL_SH_SCI_DMA */
static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
{
@@ -2581,6 +2591,7 @@ static const struct uart_ops sci_uart_ops = {
.break_ctl = sci_break_ctl,
.startup = sci_startup,
.shutdown = sci_shutdown,
+ .flush_buffer = sci_flush_buffer,
.set_termios = sci_set_termios,
.pm = sci_pm,
.type = sci_type,
@@ -2950,6 +2961,7 @@ static inline int sci_probe_earlyprintk(struct platform_device *pdev)
static const char banner[] __initconst = "SuperH (H)SCI(F) driver initialized";
+static DEFINE_MUTEX(sci_uart_registration_lock);
static struct uart_driver sci_uart_driver = {
.owner = THIS_MODULE,
.driver_name = "sci",
@@ -3078,6 +3090,16 @@ static int sci_probe_single(struct platform_device *dev,
return -EINVAL;
}
+ mutex_lock(&sci_uart_registration_lock);
+ if (!sci_uart_driver.state) {
+ ret = uart_register_driver(&sci_uart_driver);
+ if (ret) {
+ mutex_unlock(&sci_uart_registration_lock);
+ return ret;
+ }
+ }
+ mutex_unlock(&sci_uart_registration_lock);
+
ret = sci_init_single(dev, sciport, index, p, false);
if (ret)
return ret;
@@ -3201,24 +3223,17 @@ static struct platform_driver sci_driver = {
static int __init sci_init(void)
{
- int ret;
-
pr_info("%s\n", banner);
- ret = uart_register_driver(&sci_uart_driver);
- if (likely(ret == 0)) {
- ret = platform_driver_register(&sci_driver);
- if (unlikely(ret))
- uart_unregister_driver(&sci_uart_driver);
- }
-
- return ret;
+ return platform_driver_register(&sci_driver);
}
static void __exit sci_exit(void)
{
platform_driver_unregister(&sci_driver);
- uart_unregister_driver(&sci_uart_driver);
+
+ if (sci_uart_driver.state)
+ uart_unregister_driver(&sci_uart_driver);
}
#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index e03282d92b59..684cb8dd8050 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -1253,7 +1253,7 @@ next_hrt:
return HRTIMER_RESTART;
}
-static struct of_device_id sirfsoc_uart_ids[] = {
+static const struct of_device_id sirfsoc_uart_ids[] = {
{ .compatible = "sirf,prima2-uart", .data = &sirfsoc_uart,},
{ .compatible = "sirf,atlas7-uart", .data = &sirfsoc_uart},
{ .compatible = "sirf,prima2-usp-uart", .data = &sirfsoc_usp},
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index c0539950f8d7..fde55dcdea5a 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -186,6 +186,7 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
* @pclk: APB clock
* @baud: Current baud rate
* @clk_rate_change_nb: Notifier block for clock changes
+ * @quirks: Flags for RXBS support.
*/
struct cdns_uart {
struct uart_port *port;
@@ -1587,20 +1588,21 @@ static int cdns_uart_probe(struct platform_device *pdev)
if (rc) {
dev_err(&pdev->dev,
"uart_add_one_port() failed; err=%i\n", rc);
- goto err_out_notif_unreg;
+ goto err_out_pm_disable;
}
return 0;
+err_out_pm_disable:
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
err_out_notif_unreg:
#ifdef CONFIG_COMMON_CLK
clk_notifier_unregister(cdns_uart_data->uartclk,
&cdns_uart_data->clk_rate_change_nb);
#endif
err_out_clk_disable:
- pm_runtime_disable(&pdev->dev);
- pm_runtime_set_suspended(&pdev->dev);
- pm_runtime_dont_use_autosuspend(&pdev->dev);
clk_disable_unprepare(cdns_uart_data->uartclk);
err_out_clk_dis_pclk:
clk_disable_unprepare(cdns_uart_data->pclk);
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index f6ffe28b8a0d..2fe216b276e2 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -492,6 +492,29 @@ static void tty_ldisc_close(struct tty_struct *tty, struct tty_ldisc *ld)
}
/**
+ * tty_ldisc_failto - helper for ldisc failback
+ * @tty: tty to open the ldisc on
+ * @ld: ldisc we are trying to fail back to
+ *
+ * Helper to try and recover a tty when switching back to the old
+ * ldisc fails and we need something attached.
+ */
+
+static int tty_ldisc_failto(struct tty_struct *tty, int ld)
+{
+ struct tty_ldisc *disc = tty_ldisc_get(tty, ld);
+ int r;
+
+ if (IS_ERR(disc))
+ return PTR_ERR(disc);
+ tty->ldisc = disc;
+ tty_set_termios_ldisc(tty, ld);
+ if ((r = tty_ldisc_open(tty, disc)) < 0)
+ tty_ldisc_put(disc);
+ return r;
+}
+
+/**
* tty_ldisc_restore - helper for tty ldisc change
* @tty: tty to recover
* @old: previous ldisc
@@ -502,9 +525,6 @@ static void tty_ldisc_close(struct tty_struct *tty, struct tty_ldisc *ld)
static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
{
- struct tty_ldisc *new_ldisc;
- int r;
-
/* There is an outstanding reference here so this is safe */
old = tty_ldisc_get(tty, old->ops->num);
WARN_ON(IS_ERR(old));
@@ -512,17 +532,13 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
tty_set_termios_ldisc(tty, old->ops->num);
if (tty_ldisc_open(tty, old) < 0) {
tty_ldisc_put(old);
- /* This driver is always present */
- new_ldisc = tty_ldisc_get(tty, N_TTY);
- if (IS_ERR(new_ldisc))
- panic("n_tty: get");
- tty->ldisc = new_ldisc;
- tty_set_termios_ldisc(tty, N_TTY);
- r = tty_ldisc_open(tty, new_ldisc);
- if (r < 0)
- panic("Couldn't open N_TTY ldisc for "
- "%s --- error %d.",
- tty_name(tty), r);
+ /* The traditional behaviour is to fall back to N_TTY, we
+ want to avoid falling back to N_NULL unless we have no
+ choice to avoid the risk of breaking anything */
+ if (tty_ldisc_failto(tty, N_TTY) < 0 &&
+ tty_ldisc_failto(tty, N_NULL) < 0)
+ panic("Couldn't open N_NULL ldisc for %s.",
+ tty_name(tty));
}
}
diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c
index 1f6e17fc3fb0..a5f88cf0f61d 100644
--- a/drivers/tty/vt/consolemap.c
+++ b/drivers/tty/vt/consolemap.c
@@ -322,15 +322,13 @@ int con_set_trans_old(unsigned char __user * arg)
{
int i;
unsigned short inbuf[E_TABSZ];
+ unsigned char ubuf[E_TABSZ];
- if (!access_ok(VERIFY_READ, arg, E_TABSZ))
+ if (copy_from_user(ubuf, arg, E_TABSZ))
return -EFAULT;
- for (i = 0; i < E_TABSZ ; i++) {
- unsigned char uc;
- __get_user(uc, arg+i);
- inbuf[i] = UNI_DIRECT_BASE | uc;
- }
+ for (i = 0; i < E_TABSZ ; i++)
+ inbuf[i] = UNI_DIRECT_BASE | ubuf[i];
console_lock();
memcpy(translations[USER_MAP], inbuf, sizeof(inbuf));
@@ -345,9 +343,6 @@ int con_get_trans_old(unsigned char __user * arg)
unsigned short *p = translations[USER_MAP];
unsigned char outbuf[E_TABSZ];
- if (!access_ok(VERIFY_WRITE, arg, E_TABSZ))
- return -EFAULT;
-
console_lock();
for (i = 0; i < E_TABSZ ; i++)
{
@@ -356,22 +351,16 @@ int con_get_trans_old(unsigned char __user * arg)
}
console_unlock();
- for (i = 0; i < E_TABSZ ; i++)
- __put_user(outbuf[i], arg+i);
- return 0;
+ return copy_to_user(arg, outbuf, sizeof(outbuf)) ? -EFAULT : 0;
}
int con_set_trans_new(ushort __user * arg)
{
- int i;
unsigned short inbuf[E_TABSZ];
- if (!access_ok(VERIFY_READ, arg, E_TABSZ*sizeof(unsigned short)))
+ if (copy_from_user(inbuf, arg, sizeof(inbuf)))
return -EFAULT;
- for (i = 0; i < E_TABSZ ; i++)
- __get_user(inbuf[i], arg+i);
-
console_lock();
memcpy(translations[USER_MAP], inbuf, sizeof(inbuf));
update_user_maps();
@@ -381,19 +370,13 @@ int con_set_trans_new(ushort __user * arg)
int con_get_trans_new(ushort __user * arg)
{
- int i;
unsigned short outbuf[E_TABSZ];
- if (!access_ok(VERIFY_WRITE, arg, E_TABSZ*sizeof(unsigned short)))
- return -EFAULT;
-
console_lock();
memcpy(outbuf, translations[USER_MAP], sizeof(outbuf));
console_unlock();
- for (i = 0; i < E_TABSZ ; i++)
- __put_user(outbuf[i], arg+i);
- return 0;
+ return copy_to_user(arg, outbuf, sizeof(outbuf)) ? -EFAULT : 0;
}
/*
@@ -557,14 +540,9 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
if (!ct)
return 0;
- unilist = kmalloc_array(ct, sizeof(struct unipair), GFP_KERNEL);
- if (!unilist)
- return -ENOMEM;
-
- for (i = ct, plist = unilist; i; i--, plist++, list++) {
- __get_user(plist->unicode, &list->unicode);
- __get_user(plist->fontpos, &list->fontpos);
- }
+ unilist = memdup_user(list, ct * sizeof(struct unipair));
+ if (IS_ERR(unilist))
+ return PTR_ERR(unilist);
console_lock();
@@ -757,11 +735,11 @@ EXPORT_SYMBOL(con_copy_unimap);
*/
int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct unipair __user *list)
{
- int i, j, k;
+ int i, j, k, ret = 0;
ushort ect;
u16 **p1, *p2;
struct uni_pagedir *p;
- struct unipair *unilist, *plist;
+ struct unipair *unilist;
unilist = kmalloc_array(ct, sizeof(struct unipair), GFP_KERNEL);
if (!unilist)
@@ -792,13 +770,11 @@ int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct uni
}
}
console_unlock();
- for (i = min(ect, ct), plist = unilist; i; i--, list++, plist++) {
- __put_user(plist->unicode, &list->unicode);
- __put_user(plist->fontpos, &list->fontpos);
- }
- __put_user(ect, uct);
+ if (copy_to_user(list, unilist, min(ect, ct) * sizeof(struct unipair)))
+ ret = -EFAULT;
+ put_user(ect, uct);
kfree(unilist);
- return ((ect <= ct) ? 0 : -ENOMEM);
+ return ret ? ret : (ect <= ct) ? 0 : -ENOMEM;
}
/*
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index 8af8d9542663..f4166263bb3a 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -1203,8 +1203,7 @@ DECLARE_TASKLET_DISABLED(keyboard_tasklet, kbd_bh, 0);
#if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_ALPHA) ||\
defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\
defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\
- (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC)) ||\
- defined(CONFIG_AVR32)
+ (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC))
#define HW_RAW(dev) (test_bit(EV_MSC, dev->evbit) && test_bit(MSC_RAW, dev->mscbit) &&\
((dev)->id.bustype == BUS_I8042) && ((dev)->id.vendor == 0x0001) && ((dev)->id.product == 0x0001))
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 9c9945284bcf..2ebaba16f785 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -425,7 +425,7 @@ static u8 build_attr(struct vc_data *vc, u8 _color, u8 _intensity, u8 _blink,
else if (_underline)
a = (a & 0xf0) | vc->vc_ulcolor;
else if (_intensity == 0)
- a = (a & 0xf0) | vc->vc_ulcolor;
+ a = (a & 0xf0) | vc->vc_halfcolor;
if (_reverse)
a = ((a) & 0x88) | ((((a) >> 4) | ((a) << 4)) & 0x77);
if (_blink)
@@ -2709,13 +2709,13 @@ int tioclinux(struct tty_struct *tty, unsigned long arg)
* related to the kernel should not use this.
*/
data = vt_get_shift_state();
- ret = __put_user(data, p);
+ ret = put_user(data, p);
break;
case TIOCL_GETMOUSEREPORTING:
console_lock(); /* May be overkill */
data = mouse_reporting();
console_unlock();
- ret = __put_user(data, p);
+ ret = put_user(data, p);
break;
case TIOCL_SETVESABLANK:
console_lock();
@@ -2724,7 +2724,7 @@ int tioclinux(struct tty_struct *tty, unsigned long arg)
break;
case TIOCL_GETKMSGREDIRECT:
data = vt_get_kmsg_redirect();
- ret = __put_user(data, p);
+ ret = put_user(data, p);
break;
case TIOCL_SETKMSGREDIRECT:
if (!capable(CAP_SYS_ADMIN)) {
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index 0cbfe1ff6f6c..96d389cb506c 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -266,10 +266,6 @@ do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_
if (copy_from_user(&tmp, user_ud, sizeof tmp))
return -EFAULT;
- if (tmp.entries)
- if (!access_ok(VERIFY_WRITE, tmp.entries,
- tmp.entry_ct*sizeof(struct unipair)))
- return -EFAULT;
switch (cmd) {
case PIO_UNIMAP:
if (!perm)
@@ -1170,10 +1166,6 @@ compat_unimap_ioctl(unsigned int cmd, struct compat_unimapdesc __user *user_ud,
if (copy_from_user(&tmp, user_ud, sizeof tmp))
return -EFAULT;
tmp_entries = compat_ptr(tmp.entries);
- if (tmp_entries)
- if (!access_ok(VERIFY_WRITE, tmp_entries,
- tmp.entry_ct*sizeof(struct unipair)))
- return -EFAULT;
switch (cmd) {
case PIO_UNIMAP:
if (!perm)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index aba74f817dc6..1cec03799cdf 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1244,42 +1244,13 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
int div_okay = 1;
int baud;
- /*
- * The logic involved in setting the baudrate can be cleanly split into
- * 3 steps.
- * 1. Standard baud rates are set in tty->termios->c_cflag
- * 2. If these are not enough, you can set any speed using alt_speed as
- * follows:
- * - set tty->termios->c_cflag speed to B38400
- * - set your real speed in tty->alt_speed; it gets ignored when
- * alt_speed==0, (or)
- * - call TIOCSSERIAL ioctl with (struct serial_struct) set as
- * follows:
- * flags & ASYNC_SPD_MASK == ASYNC_SPD_[HI, VHI, SHI, WARP],
- * this just sets alt_speed to (HI: 57600, VHI: 115200,
- * SHI: 230400, WARP: 460800)
- * ** Steps 1, 2 are done courtesy of tty_get_baud_rate
- * 3. You can also set baud rate by setting custom divisor as follows
- * - set tty->termios->c_cflag speed to B38400
- * - call TIOCSSERIAL ioctl with (struct serial_struct) set as
- * follows:
- * o flags & ASYNC_SPD_MASK == ASYNC_SPD_CUST
- * o custom_divisor set to baud_base / your_new_baudrate
- * ** Step 3 is done courtesy of code borrowed from serial.c
- * I should really spend some time and separate + move this common
- * code to serial.c, it is replicated in nearly every serial driver
- * you see.
- */
-
- /* 1. Get the baud rate from the tty settings, this observes
- alt_speed hack */
-
baud = tty_get_baud_rate(tty);
dev_dbg(dev, "%s - tty_get_baud_rate reports speed %d\n", __func__, baud);
- /* 2. Observe async-compatible custom_divisor hack, update baudrate
- if needed */
-
+ /*
+ * Observe deprecated async-compatible custom_divisor hack, update
+ * baudrate if needed.
+ */
if (baud == 38400 &&
((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
(priv->custom_divisor)) {
@@ -1288,8 +1259,6 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
__func__, priv->custom_divisor, baud);
}
- /* 3. Convert baudrate to device-specific divisor */
-
if (!baud)
baud = 9600;
switch (priv->chip_type) {
@@ -1505,8 +1474,7 @@ static int set_serial_info(struct tty_struct *tty,
/* Do error checking and permission checking */
if (!capable(CAP_SYS_ADMIN)) {
- if (((new_serial.flags & ~ASYNC_USR_MASK) !=
- (priv->flags & ~ASYNC_USR_MASK))) {
+ if ((new_serial.flags ^ priv->flags) & ~ASYNC_USR_MASK) {
mutex_unlock(&priv->cfg_lock);
return -EPERM;
}
@@ -1530,23 +1498,14 @@ static int set_serial_info(struct tty_struct *tty,
check_and_exit:
write_latency_timer(port);
- if ((old_priv.flags & ASYNC_SPD_MASK) !=
- (priv->flags & ASYNC_SPD_MASK)) {
- if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- tty->alt_speed = 57600;
- else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- tty->alt_speed = 115200;
- else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
- tty->alt_speed = 230400;
- else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
- tty->alt_speed = 460800;
- else
- tty->alt_speed = 0;
- }
- if (((old_priv.flags & ASYNC_SPD_MASK) !=
- (priv->flags & ASYNC_SPD_MASK)) ||
- (((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
- (old_priv.custom_divisor != priv->custom_divisor))) {
+ if ((priv->flags ^ old_priv.flags) & ASYNC_SPD_MASK ||
+ ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST &&
+ priv->custom_divisor != old_priv.custom_divisor)) {
+
+ /* warn about deprecation unless clearing */
+ if (priv->flags & ASYNC_SPD_MASK)
+ dev_warn_ratelimited(&port->dev, "use of SPD flags is deprecated\n");
+
change_speed(tty, port);
mutex_unlock(&priv->cfg_lock);
}
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 6116d5275a3e..112b3e1e20e3 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -866,8 +866,6 @@ COMPATIBLE_IOCTL(TIOCGDEV)
COMPATIBLE_IOCTL(TIOCCBRK)
COMPATIBLE_IOCTL(TIOCGSID)
COMPATIBLE_IOCTL(TIOCGICOUNT)
-COMPATIBLE_IOCTL(TIOCGPKT)
-COMPATIBLE_IOCTL(TIOCGPTLCK)
COMPATIBLE_IOCTL(TIOCGEXCL)
/* Little t */
COMPATIBLE_IOCTL(TIOCGETD)
@@ -883,16 +881,12 @@ COMPATIBLE_IOCTL(TIOCMGET)
COMPATIBLE_IOCTL(TIOCMBIC)
COMPATIBLE_IOCTL(TIOCMBIS)
COMPATIBLE_IOCTL(TIOCMSET)
-COMPATIBLE_IOCTL(TIOCPKT)
COMPATIBLE_IOCTL(TIOCNOTTY)
COMPATIBLE_IOCTL(TIOCSTI)
COMPATIBLE_IOCTL(TIOCOUTQ)
COMPATIBLE_IOCTL(TIOCSPGRP)
COMPATIBLE_IOCTL(TIOCGPGRP)
-COMPATIBLE_IOCTL(TIOCGPTN)
-COMPATIBLE_IOCTL(TIOCSPTLCK)
COMPATIBLE_IOCTL(TIOCSERGETLSR)
-COMPATIBLE_IOCTL(TIOCSIG)
#ifdef TIOCSRS485
COMPATIBLE_IOCTL(TIOCSRS485)
#endif
diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h
index 3c8825b67298..d36bc8d17e97 100644
--- a/include/linux/platform_data/atmel.h
+++ b/include/linux/platform_data/atmel.h
@@ -9,7 +9,6 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
-#include <linux/serial.h>
/* Compact Flash */
struct at91_cf_data {
@@ -42,15 +41,6 @@ struct atmel_nand_data {
bool need_reset_workaround;
};
- /* Serial */
-struct atmel_uart_data {
- int num; /* port num */
- short use_dma_tx; /* use transmit DMA? */
- short use_dma_rx; /* use receive DMA? */
- void __iomem *regs; /* virt. base address, if any */
- struct serial_rs485 rs485; /* rs485 settings */
-};
-
/* FIXME: this needs a better location, but gets stuff building again */
extern int at91_suspend_entering_slow_clock(void);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 64d892f1e5cd..1775500294bb 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -195,6 +195,7 @@ struct uart_port {
#define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15))
#define UPF_MAGIC_MULTIPLIER ((__force upf_t) ASYNC_MAGIC_MULTIPLIER /* 16 */ )
+#define UPF_NO_THRE_TEST ((__force upf_t) (1 << 19))
/* Port has hardware-assisted h/w flow control */
#define UPF_AUTO_CTS ((__force upf_t) (1 << 20))
#define UPF_AUTO_RTS ((__force upf_t) (1 << 21))
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 8156a9ee6fe6..69464c0d8068 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -316,7 +316,6 @@ struct tty_struct {
struct tty_struct *link;
struct fasync_struct *fasync;
- int alt_speed; /* For magic substitution of 38400 bps */
wait_queue_head_t write_wait;
wait_queue_head_t read_wait;
struct work_struct hangup_work;
diff --git a/include/uapi/asm-generic/ioctls.h b/include/uapi/asm-generic/ioctls.h
index 143dacbb7d9a..06d5f7ddf84e 100644
--- a/include/uapi/asm-generic/ioctls.h
+++ b/include/uapi/asm-generic/ioctls.h
@@ -77,6 +77,7 @@
#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
+#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */
#define FIONCLEX 0x5450
#define FIOCLEX 0x5451
diff --git a/include/uapi/linux/serial.h b/include/uapi/linux/serial.h
index 5d59c3ebf459..d2667ecd54ac 100644
--- a/include/uapi/linux/serial.h
+++ b/include/uapi/linux/serial.h
@@ -122,6 +122,9 @@ struct serial_rs485 {
#define SER_RS485_RTS_AFTER_SEND (1 << 2) /* Logical level for
RTS pin after sent*/
#define SER_RS485_RX_DURING_TX (1 << 4)
+#define SER_RS485_TERMINATE_BUS (1 << 5) /* Enable bus
+ termination
+ (if supported) */
__u32 delay_rts_before_send; /* Delay before send (milliseconds) */
__u32 delay_rts_after_send; /* Delay after send (milliseconds) */
__u32 padding[5]; /* Memory is cheap, new structs
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 9ec741b133fe..c34a2a3eeff5 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -83,7 +83,7 @@
/* Parisc type numbers. */
#define PORT_MUX 48
-/* Atmel AT91 / AT32 SoC */
+/* Atmel AT91 SoC */
#define PORT_ATMEL 49
/* Macintosh Zilog type numbers */
diff --git a/include/uapi/linux/tty.h b/include/uapi/linux/tty.h
index e7855dffd592..cf1455396df0 100644
--- a/include/uapi/linux/tty.h
+++ b/include/uapi/linux/tty.h
@@ -36,5 +36,6 @@
#define N_TRACEROUTER 24 /* Trace data routing for MIPI P1149.7 */
#define N_NCI 25 /* NFC NCI UART */
#define N_SPEAKUP 26 /* Speakup communication with synths */
+#define N_NULL 27 /* Null ldisc used for error handling */
#endif /* _UAPI_LINUX_TTY_H */
diff --git a/net/irda/ircomm/ircomm_tty_ioctl.c b/net/irda/ircomm/ircomm_tty_ioctl.c
index f18070118d05..171c3dee760e 100644
--- a/net/irda/ircomm/ircomm_tty_ioctl.c
+++ b/net/irda/ircomm/ircomm_tty_ioctl.c
@@ -97,33 +97,7 @@ static void ircomm_tty_change_speed(struct ircomm_tty_cb *self,
self->settings.flow_control &= ~IRCOMM_RTS_CTS_IN;
}
tty_port_set_check_carrier(&self->port, ~cflag & CLOCAL);
-#if 0
- /*
- * Set up parity check flag
- */
-
- if (I_INPCK(self->tty))
- driver->read_status_mask |= LSR_FE | LSR_PE;
- if (I_BRKINT(driver->tty) || I_PARMRK(driver->tty))
- driver->read_status_mask |= LSR_BI;
-
- /*
- * Characters to ignore
- */
- driver->ignore_status_mask = 0;
- if (I_IGNPAR(driver->tty))
- driver->ignore_status_mask |= LSR_PE | LSR_FE;
-
- if (I_IGNBRK(self->tty)) {
- self->ignore_status_mask |= LSR_BI;
- /*
- * If we're ignore parity and break indicators, ignore
- * overruns too. (For real raw support).
- */
- if (I_IGNPAR(self->tty))
- self->ignore_status_mask |= LSR_OE;
- }
-#endif
+
self->settings.data_format = cval;
ircomm_param_request(self, IRCOMM_DATA_FORMAT, FALSE);
@@ -271,67 +245,6 @@ static int ircomm_tty_get_serial_info(struct ircomm_tty_cb *self,
static int ircomm_tty_set_serial_info(struct ircomm_tty_cb *self,
struct serial_struct __user *new_info)
{
-#if 0
- struct serial_struct new_serial;
- struct ircomm_tty_cb old_state, *state;
-
- if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
- return -EFAULT;
-
-
- state = self
- old_state = *self;
-
- if (!capable(CAP_SYS_ADMIN)) {
- if ((new_serial.baud_base != state->settings.data_rate) ||
- (new_serial.close_delay != state->close_delay) ||
- ((new_serial.flags & ~ASYNC_USR_MASK) !=
- (self->flags & ~ASYNC_USR_MASK)))
- return -EPERM;
- state->flags = ((state->flags & ~ASYNC_USR_MASK) |
- (new_serial.flags & ASYNC_USR_MASK));
- self->flags = ((self->flags & ~ASYNC_USR_MASK) |
- (new_serial.flags & ASYNC_USR_MASK));
- /* self->custom_divisor = new_serial.custom_divisor; */
- goto check_and_exit;
- }
-
- /*
- * OK, past this point, all the error checking has been done.
- * At this point, we start making changes.....
- */
-
- if (self->settings.data_rate != new_serial.baud_base) {
- self->settings.data_rate = new_serial.baud_base;
- ircomm_param_request(self, IRCOMM_DATA_RATE, TRUE);
- }
-
- self->close_delay = new_serial.close_delay * HZ/100;
- self->closing_wait = new_serial.closing_wait * HZ/100;
- /* self->custom_divisor = new_serial.custom_divisor; */
-
- self->flags = ((self->flags & ~ASYNC_FLAGS) |
- (new_serial.flags & ASYNC_FLAGS));
- self->tty->low_latency = (self->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-
- check_and_exit:
-
- if (tty_port_initialized(self)) {
- if (((old_state.flags & ASYNC_SPD_MASK) !=
- (self->flags & ASYNC_SPD_MASK)) ||
- (old_driver.custom_divisor != driver->custom_divisor)) {
- if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- driver->tty->alt_speed = 57600;
- if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- driver->tty->alt_speed = 115200;
- if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
- driver->tty->alt_speed = 230400;
- if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
- driver->tty->alt_speed = 460800;
- ircomm_tty_change_speed(driver);
- }
- }
-#endif
return 0;
}
@@ -367,24 +280,6 @@ int ircomm_tty_ioctl(struct tty_struct *tty,
case TIOCGICOUNT:
pr_debug("%s(), TIOCGICOUNT not impl!\n", __func__);
-#if 0
- save_flags(flags); cli();
- cnow = driver->icount;
- restore_flags(flags);
- p_cuser = (struct serial_icounter_struct __user *) arg;
- if (put_user(cnow.cts, &p_cuser->cts) ||
- put_user(cnow.dsr, &p_cuser->dsr) ||
- put_user(cnow.rng, &p_cuser->rng) ||
- put_user(cnow.dcd, &p_cuser->dcd) ||
- put_user(cnow.rx, &p_cuser->rx) ||
- put_user(cnow.tx, &p_cuser->tx) ||
- put_user(cnow.frame, &p_cuser->frame) ||
- put_user(cnow.overrun, &p_cuser->overrun) ||
- put_user(cnow.parity, &p_cuser->parity) ||
- put_user(cnow.brk, &p_cuser->brk) ||
- put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
- return -EFAULT;
-#endif
return 0;
default:
ret = -ENOIOCTLCMD; /* ioctls which we must ignore */