summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorTony Lindgren <tony@atomide.com>2008-07-03 12:24:38 +0300
committerTony Lindgren <tony@atomide.com>2008-07-03 12:24:38 +0300
commitc2d43e39c7c303db53facd0bea44b66f263e3f35 (patch)
tree10b0b5a5dde1176f925b5aedcda32963f7c80029
parent373a67021d00a8b8c86bfa19f8914377de05b4bd (diff)
ARM: OMAP: SRAM: Split sram24xx.S into sram242x.S and sram243x.S
Split sram24xx.S into sram242x.S and sram243x.S Signed-off-by: Tony Lindgren <tony@atomide.com>
-rw-r--r--arch/arm/mach-omap1/sram.S6
-rw-r--r--arch/arm/mach-omap2/Makefile6
-rw-r--r--arch/arm/mach-omap2/clock.c3
-rw-r--r--arch/arm/mach-omap2/prcm-common.h1
-rw-r--r--arch/arm/mach-omap2/prm.h18
-rw-r--r--arch/arm/mach-omap2/sram242x.S105
-rw-r--r--arch/arm/mach-omap2/sram243x.S321
-rw-r--r--arch/arm/plat-omap/sram.c211
-rw-r--r--include/asm-arm/arch-omap/sram.h37
9 files changed, 604 insertions, 104 deletions
diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S
index 9e1813c77e05..126d252062d7 100644
--- a/arch/arm/mach-omap1/sram.S
+++ b/arch/arm/mach-omap1/sram.S
@@ -18,7 +18,7 @@
/*
* Reprograms ULPD and CKCTL.
*/
-ENTRY(sram_reprogram_clock)
+ENTRY(omap1_sram_reprogram_clock)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
mov r2, #IO_ADDRESS(DPLL_CTL) & 0xff000000
@@ -53,5 +53,5 @@ lock: ldrh r4, [r2], #0 @ read back dpll value
out:
ldmfd sp!, {r0 - r12, pc} @ restore regs and return
-ENTRY(sram_reprogram_clock_sz)
- .word . - sram_reprogram_clock
+ENTRY(omap1_sram_reprogram_clock_sz)
+ .word . - omap1_sram_reprogram_clock
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 6c59b267105d..c2477428e351 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,9 +3,13 @@
#
# Common support
-obj-y := irq.o id.o io.o sram242x.o memory.o control.o prcm.o clock.o mux.o \
+obj-y := irq.o id.o io.o memory.o control.o prcm.o clock.o mux.o \
devices.o serial.o gpmc.o timer-gp.o
+# Functions loaded to SRAM
+obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o
+obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o
+
# Power Management
obj-$(CONFIG_PM) += pm.o sleep.o
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index ab9fc57d25f1..0243480e8bfe 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -603,7 +603,8 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
clk->rate = clk->parent->rate / new_div;
if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
- __raw_writel(OMAP24XX_VALID_CONFIG, OMAP24XX_PRCM_CLKCFG_CTRL);
+ prm_write_mod_reg(OMAP24XX_VALID_CONFIG,
+ OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
wmb();
}
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index cacb34086e35..54c32f482131 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -32,6 +32,7 @@
/* Chip-specific module offsets */
+#define OMAP24XX_GR_MOD OCP_MOD
#define OMAP24XX_DSP_MOD 0x800
#define OMAP2430_MDM_MOD 0xc00
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 618f8111658a..dcdb35bfa0c0 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -38,13 +38,29 @@
*
*/
+/* Global 24xx registers in GR_MOD (Same as OCP_MOD for 24xx) */
+#define OMAP24XX_PRCM_VOLTCTRL_OFFSET 0x0050
+#define OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET 0x0080
+
+/* 242x GR_MOD registers, use these only for assembly code */
+#define OMAP242X_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD, \
+ OMAP24XX_PRCM_VOLTCTRL_OFFSET)
+#define OMAP242X_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD, \
+ OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
+
+/* 243x GR_MOD registers, use these only for assembly code */
+#define OMAP243X_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD, \
+ OMAP24XX_PRCM_VOLTCTRL_OFFSET)
+#define OMAP243X_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD, \
+ OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
+
+/* These will disappear */
#define OMAP24XX_PRCM_REVISION OMAP_PRM_REGADDR(OCP_MOD, 0x0000)
#define OMAP24XX_PRCM_SYSCONFIG OMAP_PRM_REGADDR(OCP_MOD, 0x0010)
#define OMAP24XX_PRCM_IRQSTATUS_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
#define OMAP24XX_PRCM_IRQENABLE_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
-#define OMAP24XX_PRCM_VOLTCTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0050)
#define OMAP24XX_PRCM_VOLTST OMAP_PRM_REGADDR(OCP_MOD, 0x0054)
#define OMAP24XX_PRCM_CLKSRC_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0060)
#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0070)
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index 4a9e49140716..4c274510f3e9 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-omap2/sram-fn.S
+ * linux/arch/arm/mach-omap2/sram242x.S
*
* Omap2 specific functions that need to be run in internal SRAM
*
@@ -27,22 +27,20 @@
#include <asm/arch/io.h>
#include <asm/hardware.h>
-#include "sdrc.h"
#include "prm.h"
#include "cm.h"
-
-#define TIMER_32KSYNCT_CR_V IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
+#include "sdrc.h"
.text
-ENTRY(sram_ddr_init)
+ENTRY(omap242x_sram_ddr_init)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
mov r12, r2 @ capture CS1 vs CS0
mov r8, r3 @ capture force parameter
/* frequency shift down */
- ldr r2, cm_clksel2_pll @ get address of dpllout reg
+ ldr r2, omap242x_sdi_cm_clksel2_pll @ get address of dpllout reg
mov r3, #0x1 @ value for 1x operation
str r3, [r2] @ go to L1-freq operation
@@ -51,7 +49,7 @@ ENTRY(sram_ddr_init)
bl voltage_shift @ go drop voltage
/* dll lock mode */
- ldr r11, sdrc_dlla_ctrl @ addr of dlla ctrl
+ ldr r11, omap242x_sdi_sdrc_dlla_ctrl @ addr of dlla ctrl
ldr r10, [r11] @ get current val
cmp r12, #0x1 @ cs1 base (2422 es2.05/1)
addeq r11, r11, #0x8 @ if cs1 base, move to DLLB
@@ -102,7 +100,7 @@ i_dll_delay:
* wait for it to finish, use 32k sync counter, 1tick=31uS.
*/
voltage_shift:
- ldr r4, prcm_voltctrl @ get addr of volt ctrl.
+ ldr r4, omap242x_sdi_prcm_voltctrl @ get addr of volt ctrl.
ldr r5, [r4] @ get value.
ldr r6, prcm_mask_val @ get value of mask
and r5, r5, r6 @ apply mask to clear bits
@@ -112,7 +110,7 @@ voltage_shift:
orr r5, r5, r3 @ build value for force
str r5, [r4] @ Force transition to L1
- ldr r3, timer_32ksynct_cr @ get addr of counter
+ ldr r3, omap242x_sdi_timer_32ksynct_cr @ get addr of counter
ldr r5, [r3] @ get value
add r5, r5, #0x3 @ give it at most 93uS
volt_delay:
@@ -121,32 +119,31 @@ volt_delay:
bhi volt_delay @ not yet->branch
mov pc, lr @ back to caller.
-/* relative load constants */
-cm_clksel2_pll:
+omap242x_sdi_cm_clksel2_pll:
.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
-sdrc_dlla_ctrl:
+omap242x_sdi_sdrc_dlla_ctrl:
.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-prcm_voltctrl:
- .word OMAP2420_PRM_REGADDR(OCP_MOD, 0x50)
+omap242x_sdi_prcm_voltctrl:
+ .word OMAP242X_PRCM_VOLTCTRL
prcm_mask_val:
.word 0xFFFF3FFC
-timer_32ksynct_cr:
- .word TIMER_32KSYNCT_CR_V
-ENTRY(sram_ddr_init_sz)
- .word . - sram_ddr_init
+omap242x_sdi_timer_32ksynct_cr:
+ .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ENTRY(omap242x_sram_ddr_init_sz)
+ .word . - omap242x_sram_ddr_init
/*
* Reprograms memory timings.
* r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
* PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
*/
-ENTRY(sram_reprogram_sdrc)
+ENTRY(omap242x_sram_reprogram_sdrc)
stmfd sp!, {r0 - r10, lr} @ save registers on stack
mov r3, #0x0 @ clear for mrc call
mcr p15, 0, r3, c7, c10, 4 @ memory barrier, finish ARM SDR/DDR
nop
nop
- ldr r6, ddr_sdrc_rfr_ctrl @ get addr of refresh reg
+ ldr r6, omap242x_srs_sdrc_rfr_ctrl @ get addr of refresh reg
ldr r5, [r6] @ get value
mov r5, r5, lsr #8 @ isolate rfr field and drop burst
@@ -160,7 +157,7 @@ ENTRY(sram_reprogram_sdrc)
movne r5, r5, lsl #1 @ mult by 2 if to full
mov r5, r5, lsl #8 @ put rfr field back into place
add r5, r5, #0x1 @ turn on burst of 1
- ldr r4, ddr_cm_clksel2_pll @ get address of out reg
+ ldr r4, omap242x_srs_cm_clksel2_pll @ get address of out reg
ldr r3, [r4] @ get curr value
orr r3, r3, #0x3
bic r3, r3, #0x3 @ clear lower bits
@@ -181,7 +178,7 @@ ENTRY(sram_reprogram_sdrc)
bne freq_out @ leave if SDR, no DLL function
/* With DDR, we need to take care of the DLL for the frequency change */
- ldr r2, ddr_sdrc_dlla_ctrl @ addr of dlla ctrl
+ ldr r2, omap242x_srs_sdrc_dlla_ctrl @ addr of dlla ctrl
str r1, [r2] @ write out new SDRC_DLLA_CTRL
add r2, r2, #0x8 @ addr to SDRC_DLLB_CTRL
str r1, [r2] @ commit to SDRC_DLLB_CTRL
@@ -197,7 +194,7 @@ freq_out:
* wait for it to finish, use 32k sync counter, 1tick=31uS.
*/
voltage_shift_c:
- ldr r10, ddr_prcm_voltctrl @ get addr of volt ctrl
+ ldr r10, omap242x_srs_prcm_voltctrl @ get addr of volt ctrl
ldr r8, [r10] @ get value
ldr r7, ddr_prcm_mask_val @ get value of mask
and r8, r8, r7 @ apply mask to clear bits
@@ -207,7 +204,7 @@ voltage_shift_c:
orr r8, r8, r7 @ build value for force
str r8, [r10] @ Force transition to L1
- ldr r10, ddr_timer_32ksynct @ get addr of counter
+ ldr r10, omap242x_srs_timer_32ksynct @ get addr of counter
ldr r8, [r10] @ get value
add r8, r8, #0x2 @ give it at most 62uS (min 31+)
volt_delay_c:
@@ -216,39 +213,39 @@ volt_delay_c:
bhi volt_delay_c @ not yet->branch
mov pc, lr @ back to caller
-ddr_cm_clksel2_pll:
+omap242x_srs_cm_clksel2_pll:
.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
-ddr_sdrc_dlla_ctrl:
+omap242x_srs_sdrc_dlla_ctrl:
.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-ddr_sdrc_rfr_ctrl:
+omap242x_srs_sdrc_rfr_ctrl:
.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-ddr_prcm_voltctrl:
- .word OMAP2420_PRM_REGADDR(OCP_MOD, 0x50)
+omap242x_srs_prcm_voltctrl:
+ .word OMAP242X_PRCM_VOLTCTRL
ddr_prcm_mask_val:
.word 0xFFFF3FFC
-ddr_timer_32ksynct:
- .word TIMER_32KSYNCT_CR_V
+omap242x_srs_timer_32ksynct:
+ .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
-ENTRY(sram_reprogram_sdrc_sz)
- .word . - sram_reprogram_sdrc
+ENTRY(omap242x_sram_reprogram_sdrc_sz)
+ .word . - omap242x_sram_reprogram_sdrc
/*
* Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
*/
-ENTRY(sram_set_prcm)
+ENTRY(omap242x_sram_set_prcm)
stmfd sp!, {r0-r12, lr} @ regs to stack
adr r4, pbegin @ addr of preload start
adr r8, pend @ addr of preload end
mcrr p15, 1, r8, r4, c12 @ preload into icache
pbegin:
/* move into fast relock bypass */
- ldr r8, pll_ctl @ get addr
+ ldr r8, omap242x_ssp_pll_ctl @ get addr
ldr r5, [r8] @ get val
mvn r6, #0x3 @ clear mask
and r5, r5, r6 @ clear field
orr r7, r5, #0x2 @ fast relock val
str r7, [r8] @ go to fast relock
- ldr r4, pll_stat @ addr of stat
+ ldr r4, omap242x_ssp_pll_stat @ addr of stat
block:
/* wait for bypass */
ldr r8, [r4] @ stat value
@@ -257,10 +254,10 @@ block:
bne block @ loop if not
/* set new dpll dividers _after_ in bypass */
- ldr r4, pll_div @ get addr
+ ldr r4, omap242x_ssp_pll_div @ get addr
str r0, [r4] @ set dpll ctrl val
- ldr r4, set_config @ get addr
+ ldr r4, omap242x_ssp_set_config @ get addr
mov r8, #1 @ valid cfg msk
str r8, [r4] @ make dividers take
@@ -274,8 +271,8 @@ wait_a_bit:
beq pend @ jump over dpll relock
/* relock DPLL with new vals */
- ldr r5, pll_stat @ get addr
- ldr r4, pll_ctl @ get addr
+ ldr r5, omap242x_ssp_pll_stat @ get addr
+ ldr r4, omap242x_ssp_pll_ctl @ get addr
orr r8, r7, #0x3 @ val for lock dpll
str r8, [r4] @ set val
mov r0, #1000 @ dead spin a bit
@@ -289,9 +286,9 @@ wait_lock:
bne wait_lock @ wait if not
pend:
/* update memory timings & briefly lock dll */
- ldr r4, sdrc_rfr @ get addr
+ ldr r4, omap242x_ssp_sdrc_rfr @ get addr
str r1, [r4] @ update refresh timing
- ldr r11, dlla_ctrl @ get addr of DLLA ctrl
+ ldr r11, omap242x_ssp_dlla_ctrl @ get addr of DLLA ctrl
ldr r10, [r11] @ get current val
mvn r9, #0x4 @ mask to get clear bit2
and r10, r10, r9 @ clear bit2 for lock mode
@@ -307,18 +304,18 @@ wait_dll_lock:
nop
ldmfd sp!, {r0-r12, pc} @ restore regs and return
-set_config:
- .word OMAP2420_PRM_REGADDR(OCP_MOD, 0x80)
-pll_ctl:
- .word OMAP2420_CM_REGADDR(PLL_MOD, CM_FCLKEN1)
-pll_stat:
- .word OMAP2420_CM_REGADDR(PLL_MOD, CM_IDLEST1)
-pll_div:
- .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL)
-sdrc_rfr:
+omap242x_ssp_set_config:
+ .word OMAP242X_PRCM_CLKCFG_CTRL
+omap242x_ssp_pll_ctl:
+ .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKEN)
+omap242x_ssp_pll_stat:
+ .word OMAP2420_CM_REGADDR(PLL_MOD, CM_IDLEST)
+omap242x_ssp_pll_div:
+ .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
+omap242x_ssp_sdrc_rfr:
.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-dlla_ctrl:
+omap242x_ssp_dlla_ctrl:
.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-ENTRY(sram_set_prcm_sz)
- .word . - sram_set_prcm
+ENTRY(omap242x_sram_set_prcm_sz)
+ .word . - omap242x_sram_set_prcm
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
new file mode 100644
index 000000000000..a3fa48dc08cd
--- /dev/null
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -0,0 +1,321 @@
+/*
+ * linux/arch/arm/mach-omap2/sram243x.S
+ *
+ * Omap2 specific functions that need to be run in internal SRAM
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/arch/io.h>
+#include <asm/hardware.h>
+
+#include "prm.h"
+#include "cm.h"
+#include "sdrc.h"
+
+ .text
+
+ENTRY(omap243x_sram_ddr_init)
+ stmfd sp!, {r0 - r12, lr} @ save registers on stack
+
+ mov r12, r2 @ capture CS1 vs CS0
+ mov r8, r3 @ capture force parameter
+
+ /* frequency shift down */
+ ldr r2, omap243x_sdi_cm_clksel2_pll @ get address of dpllout reg
+ mov r3, #0x1 @ value for 1x operation
+ str r3, [r2] @ go to L1-freq operation
+
+ /* voltage shift down */
+ mov r9, #0x1 @ set up for L1 voltage call
+ bl voltage_shift @ go drop voltage
+
+ /* dll lock mode */
+ ldr r11, omap243x_sdi_sdrc_dlla_ctrl @ addr of dlla ctrl
+ ldr r10, [r11] @ get current val
+ cmp r12, #0x1 @ cs1 base (2422 es2.05/1)
+ addeq r11, r11, #0x8 @ if cs1 base, move to DLLB
+ mvn r9, #0x4 @ mask to get clear bit2
+ and r10, r10, r9 @ clear bit2 for lock mode.
+ orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos)
+ orr r10, r10, #0x2 @ 90 degree phase for all below 133Mhz
+ str r10, [r11] @ commit to DLLA_CTRL
+ bl i_dll_wait @ wait for dll to lock
+
+ /* get dll value */
+ add r11, r11, #0x4 @ get addr of status reg
+ ldr r10, [r11] @ get locked value
+
+ /* voltage shift up */
+ mov r9, #0x0 @ shift back to L0-voltage
+ bl voltage_shift @ go raise voltage
+
+ /* frequency shift up */
+ mov r3, #0x2 @ value for 2x operation
+ str r3, [r2] @ go to L0-freq operation
+
+ /* reset entry mode for dllctrl */
+ sub r11, r11, #0x4 @ move from status to ctrl
+ cmp r12, #0x1 @ normalize if cs1 based
+ subeq r11, r11, #0x8 @ possibly back to DLLA
+ cmp r8, #0x1 @ if forced unlock exit
+ orreq r1, r1, #0x4 @ make sure exit with unlocked value
+ str r1, [r11] @ restore DLLA_CTRL high value
+ add r11, r11, #0x8 @ move to DLLB_CTRL addr
+ str r1, [r11] @ set value DLLB_CTRL
+ bl i_dll_wait @ wait for possible lock
+
+ /* set up for return, DDR should be good */
+ str r10, [r0] @ write dll_status and return counter
+ ldmfd sp!, {r0 - r12, pc} @ restore regs and return
+
+ /* ensure the DLL has relocked */
+i_dll_wait:
+ mov r4, #0x800 @ delay DLL relock, min 0x400 L3 clocks
+i_dll_delay:
+ subs r4, r4, #0x1
+ bne i_dll_delay
+ mov pc, lr
+
+ /*
+ * shift up or down voltage, use R9 as input to tell level.
+ * wait for it to finish, use 32k sync counter, 1tick=31uS.
+ */
+voltage_shift:
+ ldr r4, omap243x_sdi_prcm_voltctrl @ get addr of volt ctrl.
+ ldr r5, [r4] @ get value.
+ ldr r6, prcm_mask_val @ get value of mask
+ and r5, r5, r6 @ apply mask to clear bits
+ orr r5, r5, r9 @ bulld value for L0/L1-volt operation.
+ str r5, [r4] @ set up for change.
+ mov r3, #0x4000 @ get val for force
+ orr r5, r5, r3 @ build value for force
+ str r5, [r4] @ Force transition to L1
+
+ ldr r3, omap243x_sdi_timer_32ksynct_cr @ get addr of counter
+ ldr r5, [r3] @ get value
+ add r5, r5, #0x3 @ give it at most 93uS
+volt_delay:
+ ldr r7, [r3] @ get timer value
+ cmp r5, r7 @ time up?
+ bhi volt_delay @ not yet->branch
+ mov pc, lr @ back to caller.
+
+omap243x_sdi_cm_clksel2_pll:
+ .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
+omap243x_sdi_sdrc_dlla_ctrl:
+ .word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
+omap243x_sdi_prcm_voltctrl:
+ .word OMAP243X_PRCM_VOLTCTRL
+prcm_mask_val:
+ .word 0xFFFF3FFC
+omap243x_sdi_timer_32ksynct_cr:
+ .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ENTRY(omap243x_sram_ddr_init_sz)
+ .word . - omap243x_sram_ddr_init
+
+/*
+ * Reprograms memory timings.
+ * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
+ * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
+ */
+ENTRY(omap243x_sram_reprogram_sdrc)
+ stmfd sp!, {r0 - r10, lr} @ save registers on stack
+ mov r3, #0x0 @ clear for mrc call
+ mcr p15, 0, r3, c7, c10, 4 @ memory barrier, finish ARM SDR/DDR
+ nop
+ nop
+ ldr r6, omap243x_srs_sdrc_rfr_ctrl @ get addr of refresh reg
+ ldr r5, [r6] @ get value
+ mov r5, r5, lsr #8 @ isolate rfr field and drop burst
+
+ cmp r0, #0x1 @ going to half speed?
+ movne r9, #0x0 @ if up set flag up for pre up, hi volt
+
+ blne voltage_shift_c @ adjust voltage
+
+ cmp r0, #0x1 @ going to half speed (post branch link)
+ moveq r5, r5, lsr #1 @ divide by 2 if to half
+ movne r5, r5, lsl #1 @ mult by 2 if to full
+ mov r5, r5, lsl #8 @ put rfr field back into place
+ add r5, r5, #0x1 @ turn on burst of 1
+ ldr r4, omap243x_srs_cm_clksel2_pll @ get address of out reg
+ ldr r3, [r4] @ get curr value
+ orr r3, r3, #0x3
+ bic r3, r3, #0x3 @ clear lower bits
+ orr r3, r3, r0 @ new state value
+ str r3, [r4] @ set new state (pll/x, x=1 or 2)
+ nop
+ nop
+
+ moveq r9, #0x1 @ if speed down, post down, drop volt
+ bleq voltage_shift_c
+
+ mcr p15, 0, r3, c7, c10, 4 @ memory barrier
+ str r5, [r6] @ set new RFR_1 value
+ add r6, r6, #0x30 @ get RFR_2 addr
+ str r5, [r6] @ set RFR_2
+ nop
+ cmp r2, #0x1 @ (SDR or DDR) do we need to adjust DLL
+ bne freq_out @ leave if SDR, no DLL function
+
+ /* With DDR, we need to take care of the DLL for the frequency change */
+ ldr r2, omap243x_srs_sdrc_dlla_ctrl @ addr of dlla ctrl
+ str r1, [r2] @ write out new SDRC_DLLA_CTRL
+ add r2, r2, #0x8 @ addr to SDRC_DLLB_CTRL
+ str r1, [r2] @ commit to SDRC_DLLB_CTRL
+ mov r1, #0x2000 @ wait DLL relock, min 0x400 L3 clocks
+dll_wait:
+ subs r1, r1, #0x1
+ bne dll_wait
+freq_out:
+ ldmfd sp!, {r0 - r10, pc} @ restore regs and return
+
+ /*
+ * shift up or down voltage, use R9 as input to tell level.
+ * wait for it to finish, use 32k sync counter, 1tick=31uS.
+ */
+voltage_shift_c:
+ ldr r10, omap243x_srs_prcm_voltctrl @ get addr of volt ctrl
+ ldr r8, [r10] @ get value
+ ldr r7, ddr_prcm_mask_val @ get value of mask
+ and r8, r8, r7 @ apply mask to clear bits
+ orr r8, r8, r9 @ bulld value for L0/L1-volt operation.
+ str r8, [r10] @ set up for change.
+ mov r7, #0x4000 @ get val for force
+ orr r8, r8, r7 @ build value for force
+ str r8, [r10] @ Force transition to L1
+
+ ldr r10, omap243x_srs_timer_32ksynct @ get addr of counter
+ ldr r8, [r10] @ get value
+ add r8, r8, #0x2 @ give it at most 62uS (min 31+)
+volt_delay_c:
+ ldr r7, [r10] @ get timer value
+ cmp r8, r7 @ time up?
+ bhi volt_delay_c @ not yet->branch
+ mov pc, lr @ back to caller
+
+omap243x_srs_cm_clksel2_pll:
+ .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
+omap243x_srs_sdrc_dlla_ctrl:
+ .word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
+omap243x_srs_sdrc_rfr_ctrl:
+ .word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
+omap243x_srs_prcm_voltctrl:
+ .word OMAP243X_PRCM_VOLTCTRL
+ddr_prcm_mask_val:
+ .word 0xFFFF3FFC
+omap243x_srs_timer_32ksynct:
+ .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+
+ENTRY(omap243x_sram_reprogram_sdrc_sz)
+ .word . - omap243x_sram_reprogram_sdrc
+
+/*
+ * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
+ */
+ENTRY(omap243x_sram_set_prcm)
+ stmfd sp!, {r0-r12, lr} @ regs to stack
+ adr r4, pbegin @ addr of preload start
+ adr r8, pend @ addr of preload end
+ mcrr p15, 1, r8, r4, c12 @ preload into icache
+pbegin:
+ /* move into fast relock bypass */
+ ldr r8, omap243x_ssp_pll_ctl @ get addr
+ ldr r5, [r8] @ get val
+ mvn r6, #0x3 @ clear mask
+ and r5, r5, r6 @ clear field
+ orr r7, r5, #0x2 @ fast relock val
+ str r7, [r8] @ go to fast relock
+ ldr r4, omap243x_ssp_pll_stat @ addr of stat
+block:
+ /* wait for bypass */
+ ldr r8, [r4] @ stat value
+ and r8, r8, #0x3 @ mask for stat
+ cmp r8, #0x1 @ there yet
+ bne block @ loop if not
+
+ /* set new dpll dividers _after_ in bypass */
+ ldr r4, omap243x_ssp_pll_div @ get addr
+ str r0, [r4] @ set dpll ctrl val
+
+ ldr r4, omap243x_ssp_set_config @ get addr
+ mov r8, #1 @ valid cfg msk
+ str r8, [r4] @ make dividers take
+
+ mov r4, #100 @ dead spin a bit
+wait_a_bit:
+ subs r4, r4, #1 @ dec loop
+ bne wait_a_bit @ delay done?
+
+ /* check if staying in bypass */
+ cmp r2, #0x1 @ stay in bypass?
+ beq pend @ jump over dpll relock
+
+ /* relock DPLL with new vals */
+ ldr r5, omap243x_ssp_pll_stat @ get addr
+ ldr r4, omap243x_ssp_pll_ctl @ get addr
+ orr r8, r7, #0x3 @ val for lock dpll
+ str r8, [r4] @ set val
+ mov r0, #1000 @ dead spin a bit
+wait_more:
+ subs r0, r0, #1 @ dec loop
+ bne wait_more @ delay done?
+wait_lock:
+ ldr r8, [r5] @ get lock val
+ and r8, r8, #3 @ isolate field
+ cmp r8, #2 @ locked?
+ bne wait_lock @ wait if not
+pend:
+ /* update memory timings & briefly lock dll */
+ ldr r4, omap243x_ssp_sdrc_rfr @ get addr
+ str r1, [r4] @ update refresh timing
+ ldr r11, omap243x_ssp_dlla_ctrl @ get addr of DLLA ctrl
+ ldr r10, [r11] @ get current val
+ mvn r9, #0x4 @ mask to get clear bit2
+ and r10, r10, r9 @ clear bit2 for lock mode
+ orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos)
+ str r10, [r11] @ commit to DLLA_CTRL
+ add r11, r11, #0x8 @ move to dllb
+ str r10, [r11] @ hit DLLB also
+
+ mov r4, #0x800 @ relock time (min 0x400 L3 clocks)
+wait_dll_lock:
+ subs r4, r4, #0x1
+ bne wait_dll_lock
+ nop
+ ldmfd sp!, {r0-r12, pc} @ restore regs and return
+
+omap243x_ssp_set_config:
+ .word OMAP243X_PRCM_CLKCFG_CTRL
+omap243x_ssp_pll_ctl:
+ .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKEN)
+omap243x_ssp_pll_stat:
+ .word OMAP2430_CM_REGADDR(PLL_MOD, CM_IDLEST)
+omap243x_ssp_pll_div:
+ .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
+omap243x_ssp_sdrc_rfr:
+ .word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
+omap243x_ssp_dlla_ctrl:
+ .word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
+
+ENTRY(omap243x_sram_set_prcm_sz)
+ .word . - omap243x_sram_set_prcm
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 1f23f0459e5f..554ee58e1294 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -10,6 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#undef DEBUG
#include <linux/module.h>
#include <linux/kernel.h>
@@ -24,25 +25,43 @@
#include <asm/arch/sram.h>
#include <asm/arch/board.h>
+#include <asm/arch/control.h>
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+# include "../mach-omap2/prm.h"
+# include "../mach-omap2/cm.h"
+# include "../mach-omap2/sdrc.h"
+#endif
+
#define OMAP1_SRAM_PA 0x20000000
-#define OMAP1_SRAM_VA 0xd0000000
+#define OMAP1_SRAM_VA VMALLOC_END
#define OMAP2_SRAM_PA 0x40200000
#define OMAP2_SRAM_PUB_PA 0x4020f800
-#define OMAP2_SRAM_VA 0xd0000000
-#define OMAP2_SRAM_PUB_VA 0xd0000800
-
-#if defined(CONFIG_ARCH_OMAP24XX)
+#define OMAP2_SRAM_VA VMALLOC_END
+#define OMAP2_SRAM_PUB_VA (VMALLOC_END + 0x800)
+#define OMAP3_SRAM_PA 0x40200000
+#define OMAP3_SRAM_VA 0xd7000000
+#define OMAP3_SRAM_PUB_PA 0x40208000
+#define OMAP3_SRAM_PUB_VA 0xd7008000
+
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#define SRAM_BOOTLOADER_SZ 0x00
#else
#define SRAM_BOOTLOADER_SZ 0x80
#endif
-#define VA_REQINFOPERM0 IO_ADDRESS(0x68005048)
-#define VA_READPERM0 IO_ADDRESS(0x68005050)
-#define VA_WRITEPERM0 IO_ADDRESS(0x68005058)
-#define VA_CONTROL_STAT IO_ADDRESS(0x480002F8)
+#define OMAP24XX_VA_REQINFOPERM0 IO_ADDRESS(0x68005048)
+#define OMAP24XX_VA_READPERM0 IO_ADDRESS(0x68005050)
+#define OMAP24XX_VA_WRITEPERM0 IO_ADDRESS(0x68005058)
+
+#define OMAP34XX_VA_REQINFOPERM0 IO_ADDRESS(0x68012848)
+#define OMAP34XX_VA_READPERM0 IO_ADDRESS(0x68012850)
+#define OMAP34XX_VA_WRITEPERM0 IO_ADDRESS(0x68012858)
+#define OMAP34XX_VA_ADDR_MATCH2 IO_ADDRESS(0x68012880)
+#define OMAP34XX_VA_SMS_RG_ATT0 IO_ADDRESS(0x6C000048)
+#define OMAP34XX_VA_CONTROL_STAT IO_ADDRESS(0x480022F0)
+
#define GP_DEVICE 0x300
-#define TYPE_MASK 0x700
#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1)))
@@ -68,14 +87,21 @@ static int is_sram_locked(void)
int type = 0;
if (cpu_is_omap242x())
- type = __raw_readl(VA_CONTROL_STAT) & TYPE_MASK;
+ type = system_rev & OMAP2_DEVICETYPE_MASK;
if (type == GP_DEVICE) {
/* RAMFW: R/W access to all initiators for all qualifier sets */
if (cpu_is_omap242x()) {
- __raw_writel(0xFF, VA_REQINFOPERM0); /* all q-vects */
- __raw_writel(0xCFDE, VA_READPERM0); /* all i-read */
- __raw_writel(0xCFDE, VA_WRITEPERM0); /* all i-write */
+ __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
+ __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */
+ __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
+ }
+ if (cpu_is_omap34xx()) {
+ __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
+ __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */
+ __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
+ __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2);
+ __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
}
return 0;
} else
@@ -92,18 +118,30 @@ void __init omap_detect_sram(void)
{
unsigned long reserved;
- if (cpu_is_omap24xx()) {
+ if (cpu_class_is_omap2()) {
if (is_sram_locked()) {
- omap_sram_base = OMAP2_SRAM_PUB_VA;
- omap_sram_start = OMAP2_SRAM_PUB_PA;
- omap_sram_size = 0x800; /* 2K */
+ if (cpu_is_omap34xx()) {
+ omap_sram_base = OMAP3_SRAM_PUB_VA;
+ omap_sram_start = OMAP3_SRAM_PUB_PA;
+ omap_sram_size = 0x8000; /* 32K */
+ } else {
+ omap_sram_base = OMAP2_SRAM_PUB_VA;
+ omap_sram_start = OMAP2_SRAM_PUB_PA;
+ omap_sram_size = 0x800; /* 2K */
+ }
} else {
- omap_sram_base = OMAP2_SRAM_VA;
- omap_sram_start = OMAP2_SRAM_PA;
- if (cpu_is_omap242x())
- omap_sram_size = 0xa0000; /* 640K */
- else if (cpu_is_omap243x())
+ if (cpu_is_omap34xx()) {
+ omap_sram_base = OMAP3_SRAM_VA;
+ omap_sram_start = OMAP3_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
+ } else {
+ omap_sram_base = OMAP2_SRAM_VA;
+ omap_sram_start = OMAP2_SRAM_PA;
+ if (cpu_is_omap242x())
+ omap_sram_size = 0xa0000; /* 640K */
+ else if (cpu_is_omap243x())
+ omap_sram_size = 0x10000; /* 64K */
+ }
}
} else {
omap_sram_base = OMAP1_SRAM_VA;
@@ -157,6 +195,13 @@ void __init omap_map_sram(void)
omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
}
+ if (cpu_is_omap34xx()) {
+ omap_sram_io_desc[0].virtual = OMAP3_SRAM_VA;
+ base = OMAP3_SRAM_PA;
+ base = ROUND_DOWN(base, PAGE_SIZE);
+ omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+ }
+
omap_sram_io_desc[0].length = 1024 * 1024; /* Use section desc */
iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
@@ -191,6 +236,7 @@ void * omap_sram_push(void * start, unsigned long size)
omap_sram_ceil -= size;
omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, sizeof(void *));
memcpy((void *)omap_sram_ceil, start, size);
+ flush_icache_range((unsigned long)start, (unsigned long)(start + size));
return (void *)omap_sram_ceil;
}
@@ -214,8 +260,9 @@ void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
int __init omap1_sram_init(void)
{
- _omap_sram_reprogram_clock = omap_sram_push(sram_reprogram_clock,
- sram_reprogram_clock_sz);
+ _omap_sram_reprogram_clock =
+ omap_sram_push(omap1_sram_reprogram_clock,
+ omap1_sram_reprogram_clock_sz);
return 0;
}
@@ -224,7 +271,7 @@ int __init omap1_sram_init(void)
#define omap1_sram_init() do {} while (0)
#endif
-#ifdef CONFIG_ARCH_OMAP2
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
u32 base_cs, u32 force_unlock);
@@ -259,19 +306,109 @@ u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2420
+int __init omap242x_sram_init(void)
+{
+ _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
+ omap242x_sram_ddr_init_sz);
+
+ _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc,
+ omap242x_sram_reprogram_sdrc_sz);
+
+ _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm,
+ omap242x_sram_set_prcm_sz);
+
+ return 0;
+}
+#else
+static inline int omap242x_sram_init(void)
+{
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+int __init omap243x_sram_init(void)
+{
+ _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
+ omap243x_sram_ddr_init_sz);
+
+ _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc,
+ omap243x_sram_reprogram_sdrc_sz);
+
+ _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm,
+ omap243x_sram_set_prcm_sz);
+
+ return 0;
+}
+#else
+static inline int omap243x_sram_init(void)
+{
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+
+static u32 (*_omap2_sram_reprogram_gpmc)(u32 perf_level);
+u32 omap2_sram_reprogram_gpmc(u32 perf_level)
+{
+ if (!_omap2_sram_reprogram_gpmc)
+ omap_sram_error();
+
+ return _omap2_sram_reprogram_gpmc(perf_level);
+}
+
+static u32 (*_omap2_sram_configure_core_dpll)(u32 m, u32 n,
+ u32 freqsel, u32 m2);
+u32 omap2_sram_configure_core_dpll(u32 m, u32 n, u32 freqsel, u32 m2)
+{
+ if (!_omap2_sram_configure_core_dpll)
+ omap_sram_error();
+
+ return _omap2_sram_configure_core_dpll(m, n, freqsel, m2);
+}
-int __init omap2_sram_init(void)
+/* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
+void restore_sram_functions(void)
{
- _omap2_sram_ddr_init = omap_sram_push(sram_ddr_init, sram_ddr_init_sz);
+ omap_sram_ceil = omap_sram_base + omap_sram_size;
- _omap2_sram_reprogram_sdrc = omap_sram_push(sram_reprogram_sdrc,
- sram_reprogram_sdrc_sz);
- _omap2_set_prcm = omap_sram_push(sram_set_prcm, sram_set_prcm_sz);
+ _omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc,
+ omap34xx_sram_reprogram_gpmc_sz);
+
+ _omap2_sram_configure_core_dpll =
+ omap_sram_push(omap34xx_sram_configure_core_dpll,
+ omap34xx_sram_configure_core_dpll_sz);
+}
+
+int __init omap34xx_sram_init(void)
+{
+ _omap2_sram_ddr_init = omap_sram_push(omap34xx_sram_ddr_init,
+ omap34xx_sram_ddr_init_sz);
+
+ _omap2_sram_reprogram_sdrc = omap_sram_push(omap34xx_sram_reprogram_sdrc,
+ omap34xx_sram_reprogram_sdrc_sz);
+
+ _omap2_set_prcm = omap_sram_push(omap34xx_sram_set_prcm,
+ omap34xx_sram_set_prcm_sz);
+
+ _omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc,
+ omap34xx_sram_reprogram_gpmc_sz);
+
+ _omap2_sram_configure_core_dpll =
+ omap_sram_push(omap34xx_sram_configure_core_dpll,
+ omap34xx_sram_configure_core_dpll_sz);
return 0;
}
#else
-#define omap2_sram_init() do {} while (0)
+static inline int omap34xx_sram_init(void)
+{
+ return 0;
+}
#endif
int __init omap_sram_init(void)
@@ -279,10 +416,14 @@ int __init omap_sram_init(void)
omap_detect_sram();
omap_map_sram();
- if (!cpu_is_omap24xx())
+ if (!(cpu_class_is_omap2()))
omap1_sram_init();
- else
- omap2_sram_init();
+ else if (cpu_is_omap242x())
+ omap242x_sram_init();
+ else if (cpu_is_omap2430())
+ omap243x_sram_init();
+ else if (cpu_is_omap34xx())
+ omap34xx_sram_init();
return 0;
}
diff --git a/include/asm-arm/arch-omap/sram.h b/include/asm-arm/arch-omap/sram.h
index bb9bb3fd532f..be59f4a9828b 100644
--- a/include/asm-arm/arch-omap/sram.h
+++ b/include/asm-arm/arch-omap/sram.h
@@ -11,6 +11,7 @@
#ifndef __ARCH_ARM_OMAP_SRAM_H
#define __ARCH_ARM_OMAP_SRAM_H
+extern int __init omap_sram_init(void);
extern void * omap_sram_push(void * start, unsigned long size);
extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
@@ -21,17 +22,35 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
/* Do not use these */
-extern void sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long sram_reprogram_clock_sz;
+extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap1_sram_reprogram_clock_sz;
-extern void sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-extern unsigned long sram_ddr_init_sz;
+extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap24xx_sram_reprogram_clock_sz;
-extern u32 sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-extern unsigned long sram_set_prcm_sz;
+extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern unsigned long omap242x_sram_ddr_init_sz;
-extern void sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type);
-extern unsigned long sram_reprogram_sdrc_sz;
+extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+ int bypass);
+extern unsigned long omap242x_sram_set_prcm_sz;
+
+extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern unsigned long omap242x_sram_reprogram_sdrc_sz;
+
+
+extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern unsigned long omap243x_sram_ddr_init_sz;
+
+extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+ int bypass);
+extern unsigned long omap243x_sram_set_prcm_sz;
+
+extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern unsigned long omap243x_sram_reprogram_sdrc_sz;
#endif