Merge tag 'arm-newsoc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull new ARM SoC support from Arnd Bergmann:
 "There are three SoC families newly dded to the 32-bit and 64-bit Arm
  architecture code in the kernel this time:

   - Daniel Palmer adds initial support for two chips made by MStar, a
     taiwanese SoC manufacturer that became part of Mediatek in 2012.

     For now, the added support is fairly minimal, with just two of its
     Cortex-A7 based 32-bit camera chips getting support for a limited
     set of on-chip peripherals.

   - Lars Povlsen from Microchip adds support for their new Sparx5
     family of ethernet switch chips using 64-bit Cortex-A53 cores.

     These are descended from earlier VSC7xxx SparX and Ocelot chips
     using 32-bit MIPS cores.

   - Daniele Alessandrelli from Intel adds support for the new Keem Bay
     SoC for computer vision, built around a Movidius VPU with Linux
     running on Arm Cortex-A53 cores"

* tag 'arm-newsoc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
  ARM: mstar: Correct the compatible string for pmsleep
  dt-bindings: arm: mstar: remove the binding description for mstar,pmsleep
  dt-bindings: mfd: syscon: add compatible string for mstar,msc313-pmsleep
  ARM: mstar: Add reboot support
  ARM: mstar: Add "pmsleep" node to base dtsi
  ARM: mstar: Add PMU
  ARM: mstar: Adjust IMI size for infinity3
  ARM: mstar: Adjust IMI size for mercury5
  ARM: mstar: Adjust IMI size of infinity
  ARM: mstar: Add IMI SRAM region
  dt-bindings: arm: mstar: Move existing MStar binding descriptions
  dt-bindings: arm: mstar: Add binding details for mstar, pmsleep
  ARM: mstar: Fix dts filename for 70mai midrive d08
  ARM: mstar: Add dts for 70mai midrive d08
  ARM: mstar: Add dts for msc313(e) based BreadBee boards
  ARM: mstar: Add mercury5 series dtsis
  ARM: mstar: Add infinity/infinity3 family dtsis
  ARM: mstar: Add Armv7 base dtsi
  ARM: mstar: Add binding details for mstar,l3bridge
  ARM: mstar: Add machine for MStar/Sigmastar Armv7 SoCs
  ...

40 files changed, 1495 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/arm/intel,keembay.yaml b/Documentation/devicetree/bindings/arm/intel,keembay.yaml
new file mode 100644
index 000000000000..4d925785f504
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/intel,keembay.yaml
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/intel,keembay.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Keem Bay platform device tree bindings
+
+maintainers:
+  - Paul J. Murphy <paul.j.murphy@intel.com>
+  - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+        - intel,keembay-evm
+      - const: intel,keembay
+...
diff --git a/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml b/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml
new file mode 100644
index 000000000000..ecf6fa12e6ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/microchip,sparx5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Boards Device Tree Bindings
+
+maintainers:
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |+
+   The Microchip Sparx5 SoC is a ARMv8-based used in a family of
+   gigabit TSN-capable gigabit switches.
+
+   The SparX-5 Ethernet switch family provides a rich set of switching
+   features such as advanced TCAM-based VLAN and QoS processing
+   enabling delivery of differentiated services, and security through
+   TCAM-based frame processing using versatile content aware processor
+   (VCAP)
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: The Sparx5 pcb125 board is a modular board,
+          which has both spi-nor and eMMC storage. The modular design
+          allows for connection of different network ports.
+        items:
+          - const: microchip,sparx5-pcb125
+          - const: microchip,sparx5
+
+      - description: The Sparx5 pcb134 is a pizzabox form factor
+          gigabit switch with 20 SFP ports. It features spi-nor and
+          either spi-nand or eMMC storage (mount option).
+        items:
+          - const: microchip,sparx5-pcb134
+          - const: microchip,sparx5
+
+      - description: The Sparx5 pcb135 is a pizzabox form factor
+          gigabit switch with 48+4 Cu ports. It features spi-nor and
+          either spi-nand or eMMC storage (mount option).
+        items:
+          - const: microchip,sparx5-pcb135
+          - const: microchip,sparx5
+
+  axi@600000000:
+    type: object
+    description: the root node in the Sparx5 platforms must contain
+      an axi bus child node. They are always at physical address
+      0x600000000 in all the Sparx5 variants.
+    properties:
+      compatible:
+        items:
+          - const: simple-bus
+
+    required:
+      - compatible
+
+required:
+  - compatible
+  - axi@600000000
+
+...
diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar,l3bridge.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar,l3bridge.yaml
new file mode 100644
index 000000000000..6816bd68f9cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mstar/mstar,l3bridge.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 thingy.jp.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mstar/mstar,l3bridge.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MStar/SigmaStar Armv7 SoC l3bridge
+
+maintainers:
+  - Daniel Palmer <daniel@thingy.jp>
+
+description: |
+  MStar/SigmaStar's Armv7 SoCs have a pipeline in the interface
+  between the CPU and memory. This means that before DMA capable
+  devices are allowed to run the pipeline must be flushed to ensure
+  everything is in memory.
+
+  The l3bridge region contains registers that allow such a flush
+  to be triggered.
+
+  This node is used by the platform code to find where the registers
+  are and install a barrier that triggers the required pipeline flush.
+
+properties:
+  compatible:
+    items:
+      - const: mstar,l3bridge
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    l3bridge: l3bridge@1f204400 {
+        compatible = "mstar,l3bridge";
+        reg = <0x1f204400 0x200>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
new file mode 100644
index 000000000000..c2f980b00b06
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mstar/mstar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar platforms device tree bindings
+
+maintainers:
+  - Daniel Palmer <daniel@thingy.jp>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: infinity boards
+        items:
+          - enum:
+              - thingyjp,breadbee-crust # thingy.jp BreadBee Crust
+          - const: mstar,infinity
+
+      - description: infinity3 boards
+        items:
+          - enum:
+              - thingyjp,breadbee # thingy.jp BreadBee
+          - const: mstar,infinity3
+
+      - description: mercury5 boards
+        items:
+          - enum:
+              - 70mai,midrived08 # 70mai midrive d08
+          - const: mstar,mercury5
diff --git a/Documentation/devicetree/bindings/clock/microchip,sparx5-dpll.yaml b/Documentation/devicetree/bindings/clock/microchip,sparx5-dpll.yaml
new file mode 100644
index 000000000000..39559a0a598a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,sparx5-dpll.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,sparx5-dpll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 DPLL Clock
+
+maintainers:
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |
+  The Sparx5 DPLL clock controller generates and supplies clock to
+  various peripherals within the SoC.
+
+properties:
+  compatible:
+    const: microchip,sparx5-dpll
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock provider for eMMC:
+  - |
+    lcpll_clk: lcpll-clk {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <2500000000>;
+    };
+    clks: clock-controller@61110000c {
+        compatible = "microchip,sparx5-dpll";
+        #clock-cells = <1>;
+        clocks = <&lcpll_clk>;
+        reg = <0x1110000c 0x24>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index 19bdaf781853..614e58bb5d7d 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -38,6 +38,8 @@ properties:
               - allwinner,sun8i-h3-system-controller
               - allwinner,sun8i-v3s-system-controller
               - allwinner,sun50i-a64-system-controller
+              - microchip,sparx5-cpu-syscon
+              - mstar,msc313-pmsleep
 
           - const: syscon
 
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 9f7af78d6864..60add08259e9 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -23,6 +23,8 @@ patternProperties:
   "^(simple-audio-card|simple-graph-card|st-plgpio|st-spics|ts),.*": true
 
   # Keep list in alphabetical order.
+  "^70mai,.*":
+    description: 70mai Co., Ltd.
   "^abilis,.*":
     description: Abilis Systems
   "^abracon,.*":
@@ -682,6 +684,8 @@ patternProperties:
     description: Microsemi Corporation
   "^msi,.*":
     description: Micro-Star International Co. Ltd.
+  "^mstar,.*":
+    description: MStar Semiconductor, Inc. (acquired by MediaTek Inc.)
   "^mti,.*":
     description: Imagination Technologies Ltd. (formerly MIPS Technologies Inc.)
   "^multi-inno,.*":
@@ -986,6 +990,8 @@ patternProperties:
     description: Spreadtrum Communications Inc.
   "^sst,.*":
     description: Silicon Storage Technology, Inc.
+  "^sstar,.*":
+    description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd. (formerly part of MStar Semiconductor, Inc.)
   "^st,.*":
     description: STMicroelectronics
   "^starry,.*":
@@ -1034,6 +1040,8 @@ patternProperties:
     description: Three Five Corp
   "^thine,.*":
     description: THine Electronics, Inc.
+  "^thingyjp,.*":
+    description: thingy.jp
   "^ti,.*":
     description: Texas Instruments
   "^tianma,.*":
diff --git a/MAINTAINERS b/MAINTAINERS
index 4ef80ba25c66..54885f54dfc0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1966,6 +1966,14 @@ F:	drivers/irqchip/irq-ixp4xx.c
 F:	include/linux/irqchip/irq-ixp4xx.h
 F:	include/linux/platform_data/timer-ixp4xx.h
 
+ARM/INTEL KEEMBAY ARCHITECTURE
+M:	Paul J. Murphy <paul.j.murphy@intel.com>
+M:	Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/arm/intel,keembay.yaml
+F:	arch/arm64/boot/dts/intel/keembay-evm.dts
+F:	arch/arm64/boot/dts/intel/keembay-soc.dtsi
+
 ARM/INTEL RESEARCH IMOTE/STARGATE 2 MACHINE SUPPORT
 M:	Jonathan Cameron <jic23@cam.ac.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2123,12 +2131,32 @@ X:	drivers/net/wireless/atmel/
 N:	at91
 N:	atmel
 
+ARM/Microchip Sparx5 SoC support
+M:	Lars Povlsen <lars.povlsen@microchip.com>
+M:	Steen Hegelund <Steen.Hegelund@microchip.com>
+M:	Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Supported
+F:	arch/arm64/boot/dts/microchip/
+N:	sparx5
+
 ARM/MIOA701 MACHINE SUPPORT
 M:	Robert Jarzmik <robert.jarzmik@free.fr>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-pxa/mioa701.c
 
+ARM/MStar/Sigmastar Armv7 SoC support
+M:	Daniel Palmer <daniel@thingy.jp>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+W:	http://linux-chenxing.org/
+F:	Documentation/devicetree/bindings/arm/mstar/*
+F:	arch/arm/boot/dts/infinity*.dtsi
+F:	arch/arm/boot/dts/mercury*.dtsi
+F:	arch/arm/boot/dts/mstar-v7.dtsi
+F:	arch/arm/mach-mstar/
+
 ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
 M:	Michael Petchkovsky <mkpetch@internode.on.net>
 S:	Maintained
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2ac74904a3ce..d54c413ad937 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -668,6 +668,8 @@ source "arch/arm/mach-mmp/Kconfig"
 
 source "arch/arm/mach-moxart/Kconfig"
 
+source "arch/arm/mach-mstar/Kconfig"
+
 source "arch/arm/mach-mv78xx0/Kconfig"
 
 source "arch/arm/mach-mvebu/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 59fde2d598d8..e7f4ca060c0f 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -197,6 +197,7 @@ machine-$(CONFIG_ARCH_MXC)		+= imx
 machine-$(CONFIG_ARCH_MEDIATEK)		+= mediatek
 machine-$(CONFIG_ARCH_MILBEAUT)		+= milbeaut
 machine-$(CONFIG_ARCH_MXS)		+= mxs
+machine-$(CONFIG_ARCH_MSTARV7)		+= mstar
 machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik
 machine-$(CONFIG_ARCH_NPCM)		+= npcm
 machine-$(CONFIG_ARCH_NSPIRE)		+= nspire
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 8fa6b4be3c5c..4572db3fa5ae 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1355,6 +1355,10 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
 	mt8127-moose.dtb \
 	mt8135-evbp1.dtb
 dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
+dtb-$(CONFIG_ARCH_MSTARV7) += \
+	infinity-msc313-breadbee_crust.dtb \
+	infinity3-msc313e-breadbee.dtb \
+	mercury5-ssc8336n-midrived08.dtb
 dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
 dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-ast2500-evb.dtb \
diff --git a/arch/arm/boot/dts/infinity-msc313-breadbee_crust.dts b/arch/arm/boot/dts/infinity-msc313-breadbee_crust.dts
new file mode 100644
index 000000000000..f24c5580d3e4
--- /dev/null
+++ b/arch/arm/boot/dts/infinity-msc313-breadbee_crust.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+/dts-v1/;
+#include "infinity-msc313.dtsi"
+
+/ {
+	model = "BreadBee Crust";
+	compatible = "thingyjp,breadbee-crust", "mstar,infinity";
+
+	aliases {
+		serial0 = &pm_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&pm_uart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/infinity-msc313.dtsi b/arch/arm/boot/dts/infinity-msc313.dtsi
new file mode 100644
index 000000000000..42f2b5552c77
--- /dev/null
+++ b/arch/arm/boot/dts/infinity-msc313.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include "infinity.dtsi"
+
+/ {
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x4000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/infinity.dtsi b/arch/arm/boot/dts/infinity.dtsi
new file mode 100644
index 000000000000..cd911adef014
--- /dev/null
+++ b/arch/arm/boot/dts/infinity.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include "mstar-v7.dtsi"
+
+&imi {
+	reg = <0xa0000000 0x16000>;
+};
diff --git a/arch/arm/boot/dts/infinity3-msc313e-breadbee.dts b/arch/arm/boot/dts/infinity3-msc313e-breadbee.dts
new file mode 100644
index 000000000000..1f93401c8530
--- /dev/null
+++ b/arch/arm/boot/dts/infinity3-msc313e-breadbee.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+/dts-v1/;
+#include "infinity3-msc313e.dtsi"
+
+/ {
+	model = "BreadBee";
+	compatible = "thingyjp,breadbee", "mstar,infinity3";
+
+	aliases {
+		serial0 = &pm_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&pm_uart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/infinity3-msc313e.dtsi b/arch/arm/boot/dts/infinity3-msc313e.dtsi
new file mode 100644
index 000000000000..4e7239afd823
--- /dev/null
+++ b/arch/arm/boot/dts/infinity3-msc313e.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include "infinity3.dtsi"
+
+/ {
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x4000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/infinity3.dtsi b/arch/arm/boot/dts/infinity3.dtsi
new file mode 100644
index 000000000000..9b918c802654
--- /dev/null
+++ b/arch/arm/boot/dts/infinity3.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include "infinity.dtsi"
+
+&imi {
+	reg = <0xa0000000 0x20000>;
+};
diff --git a/arch/arm/boot/dts/mercury5-ssc8336n-midrived08.dts b/arch/arm/boot/dts/mercury5-ssc8336n-midrived08.dts
new file mode 100644
index 000000000000..f24bd8cb8e60
--- /dev/null
+++ b/arch/arm/boot/dts/mercury5-ssc8336n-midrived08.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+/dts-v1/;
+#include "mercury5-ssc8336n.dtsi"
+
+/ {
+	model = "70mai Midrive D08";
+	compatible = "70mai,midrived08", "mstar,mercury5";
+
+	aliases {
+		serial0 = &pm_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&pm_uart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mercury5-ssc8336n.dtsi b/arch/arm/boot/dts/mercury5-ssc8336n.dtsi
new file mode 100644
index 000000000000..7d4a4630c25c
--- /dev/null
+++ b/arch/arm/boot/dts/mercury5-ssc8336n.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include "mercury5.dtsi"
+
+/ {
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x4000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/mercury5.dtsi b/arch/arm/boot/dts/mercury5.dtsi
new file mode 100644
index 000000000000..a7d0dd9d6132
--- /dev/null
+++ b/arch/arm/boot/dts/mercury5.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include "mstar-v7.dtsi"
+
+&imi {
+	reg = <0xa0000000 0x20000>;
+};
diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/mstar-v7.dtsi
new file mode 100644
index 000000000000..3b7b9b793736
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-v7.dtsi
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+	};
+
+	arch_timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2)
+				| IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2)
+				| IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2)
+				| IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2)
+				| IRQ_TYPE_LEVEL_LOW)>;
+		/*
+		 * we shouldn't need this but the vendor
+		 * u-boot is broken
+		 */
+		clock-frequency = <6000000>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x16001000 0x16001000 0x00007000>,
+			 <0x1f000000 0x1f000000 0x00400000>,
+			 <0xa0000000 0xa0000000 0x20000>;
+
+		gic: interrupt-controller@16001000 {
+			compatible = "arm,cortex-a7-gic";
+			reg = <0x16001000 0x1000>,
+			      <0x16002000 0x2000>,
+			      <0x16004000 0x2000>,
+			      <0x16006000 0x2000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2)
+					| IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		riu: bus@1f000000 {
+			compatible = "simple-bus";
+			reg = <0x1f000000 0x00400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1f000000 0x00400000>;
+
+			pmsleep: syscon@1c00 {
+				compatible = "mstar,msc313-pmsleep", "syscon";
+				reg = <0x1c00 0x100>;
+			};
+
+			reboot {
+				compatible = "syscon-reboot";
+				regmap = <&pmsleep>;
+				offset = <0xb8>;
+				mask = <0x79>;
+			};
+
+			l3bridge: l3bridge@204400 {
+				compatible = "mstar,l3bridge";
+				reg = <0x204400 0x200>;
+			};
+
+			pm_uart: uart@221000 {
+				compatible = "ns16550a";
+				reg = <0x221000 0x100>;
+				reg-shift = <3>;
+				clock-frequency = <172000000>;
+				status = "disabled";
+			};
+		};
+
+		imi: sram@a0000000 {
+			compatible = "mmio-sram";
+			reg = <0xa0000000 0x10000>;
+		};
+	};
+};
diff --git a/arch/arm/mach-mstar/Kconfig b/arch/arm/mach-mstar/Kconfig
new file mode 100644
index 000000000000..52744fe32368
--- /dev/null
+++ b/arch/arm/mach-mstar/Kconfig
@@ -0,0 +1,26 @@
+menuconfig ARCH_MSTARV7
+	bool "MStar/Sigmastar Armv7 SoC Support"
+	depends on ARCH_MULTI_V7
+	select ARM_GIC
+	select ARM_HEAVY_MB
+	help
+	  Support for newer MStar/Sigmastar SoC families that are
+	  based on Armv7 cores like the Cortex A7 and share the same
+	  basic hardware like the infinity and mercury series.
+
+if ARCH_MSTARV7
+
+config MACH_INFINITY
+	bool "MStar/Sigmastar infinity SoC support"
+	default ARCH_MSTARV7
+	help
+	  Support for MStar/Sigmastar infinity IP camera SoCs.
+
+config MACH_MERCURY
+	bool "MStar/Sigmastar mercury SoC support"
+	default ARCH_MSTARV7
+	help
+	  Support for MStar/Sigmastar mercury dash camera SoCs.
+	  Note that older Mercury2 SoCs are ARM9 based and not supported.
+
+endif
diff --git a/arch/arm/mach-mstar/Makefile b/arch/arm/mach-mstar/Makefile
new file mode 100644
index 000000000000..93b0391ede7e
--- /dev/null
+++ b/arch/arm/mach-mstar/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ARCH_MSTARV7) += mstarv7.o
diff --git a/arch/arm/mach-mstar/mstarv7.c b/arch/arm/mach-mstar/mstarv7.c
new file mode 100644
index 000000000000..81a4cbcab206
--- /dev/null
+++ b/arch/arm/mach-mstar/mstarv7.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree support for MStar/Sigmastar Armv7 SoCs
+ *
+ * Copyright (c) 2020 thingy.jp
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include <linux/init.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+
+/*
+ * In the u-boot code the area these registers are in is
+ * called "L3 bridge" and there are register descriptions
+ * for something in the same area called "AXI".
+ *
+ * It's not exactly known what this is but the vendor code
+ * for both u-boot and linux share calls to "flush the miu pipe".
+ * This seems to be to force pending CPU writes to memory so that
+ * the state is right before DMA capable devices try to read
+ * descriptors and data the CPU has prepared. Without doing this
+ * ethernet doesn't work reliably for example.
+ */
+
+#define MSTARV7_L3BRIDGE_FLUSH		0x14
+#define MSTARV7_L3BRIDGE_STATUS		0x40
+#define MSTARV7_L3BRIDGE_FLUSH_TRIGGER	BIT(0)
+#define MSTARV7_L3BRIDGE_STATUS_DONE	BIT(12)
+
+static void __iomem *l3bridge;
+
+static const char * const mstarv7_board_dt_compat[] __initconst = {
+	"mstar,infinity",
+	"mstar,infinity3",
+	"mstar,mercury5",
+	NULL,
+};
+
+/*
+ * This may need locking to deal with situations where an interrupt
+ * happens while we are in here and mb() gets called by the interrupt handler.
+ *
+ * The vendor code did have a spin lock but it doesn't seem to be needed and
+ * removing it hasn't caused any side effects so far.
+ *
+ * [writel|readl]_relaxed have to be used here because otherwise
+ * we'd end up right back in here.
+ */
+static void mstarv7_mb(void)
+{
+	/* toggle the flush miu pipe fire bit */
+	writel_relaxed(0, l3bridge + MSTARV7_L3BRIDGE_FLUSH);
+	writel_relaxed(MSTARV7_L3BRIDGE_FLUSH_TRIGGER, l3bridge
+			+ MSTARV7_L3BRIDGE_FLUSH);
+	while (!(readl_relaxed(l3bridge + MSTARV7_L3BRIDGE_STATUS)
+			& MSTARV7_L3BRIDGE_STATUS_DONE)) {
+		/* wait for flush to complete */
+	}
+}
+
+static void __init mstarv7_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "mstar,l3bridge");
+	l3bridge = of_iomap(np, 0);
+	if (l3bridge)
+		soc_mb = mstarv7_mb;
+	else
+		pr_warn("Failed to install memory barrier, DMA will be broken!\n");
+}
+
+DT_MACHINE_START(MSTARV7_DT, "MStar/Sigmastar Armv7 (Device Tree)")
+	.dt_compat	= mstarv7_board_dt_compat,
+	.init_machine	= mstarv7_init,
+MACHINE_END
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 1d3710e3626a..cd58f8495c45 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -89,6 +89,20 @@ config ARCH_EXYNOS
 	help
 	  This enables support for ARMv8 based Samsung Exynos SoC family.
 
+config ARCH_SPARX5
+	bool "ARMv8 based Microchip Sparx5 SoC family"
+	select PINCTRL
+	select DW_APB_TIMER_OF
+	help
+	  This enables support for the Microchip Sparx5 ARMv8-based
+	  SoC family of TSN-capable gigabit switches.
+
+	  The SparX-5 Ethernet switch family provides a rich set of
+	  switching features such as advanced TCAM-based VLAN and QoS
+	  processing enabling delivery of differentiated services, and
+	  security through TCAM-based frame processing using versatile
+	  content aware processor (VCAP).
+
 config ARCH_K3
 	bool "Texas Instruments Inc. K3 multicore SoC architecture"
 	select PM_GENERIC_DOMAINS if PM
@@ -122,6 +136,11 @@ config ARCH_HISI
 	help
 	  This enables support for Hisilicon ARMv8 SoC family
 
+config ARCH_KEEMBAY
+	bool "Keem Bay SoC"
+	help
+	  This enables support for Intel Movidius SoC code-named Keem Bay.
+
 config ARCH_MEDIATEK
 	bool "MediaTek SoC Family"
 	select ARM_GIC
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 6f3e1556ce42..270e8aabbac8 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -17,6 +17,7 @@ subdir-y += intel
 subdir-y += lg
 subdir-y += marvell
 subdir-y += mediatek
+subdir-y += microchip
 subdir-y += nvidia
 subdir-y += qcom
 subdir-y += realtek
diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
index 40cb16e8c814..296eceec4276 100644
--- a/arch/arm64/boot/dts/intel/Makefile
+++ b/arch/arm64/boot/dts/intel/Makefile
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb \
 			     socfpga_agilex_socdk_nand.dtb
+dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
diff --git a/arch/arm64/boot/dts/intel/keembay-evm.dts b/arch/arm64/boot/dts/intel/keembay-evm.dts
new file mode 100644
index 000000000000..466c85363a29
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/keembay-evm.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020, Intel Corporation
+ *
+ * Device tree describing Keem Bay EVM board.
+ */
+
+/dts-v1/;
+
+#include "keembay-soc.dtsi"
+
+/ {
+	model = "Keem Bay EVM";
+	compatible = "intel,keembay-evm", "intel,keembay";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 2GB of DDR memory. */
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/intel/keembay-soc.dtsi b/arch/arm64/boot/dts/intel/keembay-soc.dtsi
new file mode 100644
index 000000000000..781761d2942b
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/keembay-soc.dtsi
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020, Intel Corporation.
+ *
+ * Device tree describing Keem Bay SoC.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	gic: interrupt-controller@20500000 {
+		compatible = "arm,gic-v3";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x0 0x20500000 0x0 0x20000>,	/* GICD */
+		      <0x0 0x20580000 0x0 0x80000>;	/* GICR */
+		/* VGIC maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		/* Secure, non-secure, virtual, and hypervisor */
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 0x7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		uart0: serial@20150000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x20150000 0x0 0x100>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <24000000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart1: serial@20160000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x20160000 0x0 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <24000000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart2: serial@20170000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x20170000 0x0 0x100>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <24000000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart3: serial@20180000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x20180000 0x0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <24000000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/Makefile b/arch/arm64/boot/dts/microchip/Makefile
new file mode 100644
index 000000000000..c6e0313eea0f
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SPARX5) += sparx5_pcb125.dtb
+dtb-$(CONFIG_ARCH_SPARX5) += sparx5_pcb134.dtb sparx5_pcb134_emmc.dtb
+dtb-$(CONFIG_ARCH_SPARX5) += sparx5_pcb135.dtb sparx5_pcb135_emmc.dtb
diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi
new file mode 100644
index 000000000000..cf712e80615d
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "microchip,sparx5";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	lcpll_clk: lcpll-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <2500000000>;
+	};
+
+	clks: clock-controller@61110000c {
+		compatible = "microchip,sparx5-dpll";
+		#clock-cells = <1>;
+		clocks = <&lcpll_clk>;
+		reg = <0x6 0x1110000c 0x24>;
+	};
+
+	ahb_clk: ahb-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+	};
+
+	sys_clk: sys-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <625000000>;
+	};
+
+	axi: axi@600000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		gic: interrupt-controller@600300000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-controller;
+			reg = <0x6 0x00300000 0x10000>,	/* GIC Dist */
+			      <0x6 0x00340000 0xc0000>,	/* GICR */
+			      <0x6 0x00200000 0x2000>,	/* GICC */
+			      <0x6 0x00210000 0x2000>,  /* GICV */
+			      <0x6 0x00220000 0x2000>;  /* GICH */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		uart0: serial@600100000 {
+			pinctrl-0 = <&uart_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x6 0x00100000 0x20>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+		};
+
+		uart1: serial@600102000 {
+			pinctrl-0 = <&uart2_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x6 0x00102000 0x20>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+		};
+
+		timer1: timer@600105000 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0x6 0x00105000 0x1000>;
+			clocks = <&ahb_clk>;
+			clock-names = "timer";
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gpio: pinctrl@6110101e0 {
+			compatible = "microchip,sparx5-pinctrl";
+			reg = <0x6 0x110101e0 0x90>, <0x6 0x10508010 0x100>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 0 64>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+
+			uart_pins: uart-pins {
+				pins = "GPIO_10", "GPIO_11";
+				function = "uart";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "GPIO_26", "GPIO_27";
+				function = "uart2";
+			};
+
+			i2c_pins: i2c-pins {
+				pins = "GPIO_14", "GPIO_15";
+				function = "twi";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "GPIO_28", "GPIO_29";
+				function = "twi2";
+			};
+		};
+
+		i2c0: i2c@600101000 {
+			compatible = "snps,designware-i2c";
+			status = "disabled";
+			pinctrl-0 = <&i2c_pins>;
+			pinctrl-names = "default";
+			reg = <0x6 0x00101000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-sda-hold-time-ns = <300>;
+			clock-frequency = <100000>;
+			clocks = <&ahb_clk>;
+		};
+
+		i2c1: i2c@600103000 {
+			compatible = "snps,designware-i2c";
+			status = "disabled";
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			reg = <0x6 0x00103000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-sda-hold-time-ns = <300>;
+			clock-frequency = <100000>;
+			clocks = <&ahb_clk>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
new file mode 100644
index 000000000000..91ee5b6cfc37
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb_common.dtsi"
+
+/ {
+	model = "Sparx5 PCB125 Reference Board";
+	compatible = "microchip,sparx5-pcb125", "microchip,sparx5";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x10000000>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb134.dts
new file mode 100644
index 000000000000..feee4e99ff57
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb134_board.dtsi"
+
+/ {
+	model = "Sparx5 PCB134 Reference Board (NAND)";
+	compatible = "microchip,sparx5-pcb134", "microchip,sparx5";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x10000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
new file mode 100644
index 000000000000..18a535a04368
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb_common.dtsi"
+
+/{
+	aliases {
+	    i2c0   = &i2c0;
+	    i2c100 = &i2c100;
+	    i2c101 = &i2c101;
+	    i2c102 = &i2c102;
+	    i2c103 = &i2c103;
+	    i2c104 = &i2c104;
+	    i2c105 = &i2c105;
+	    i2c106 = &i2c106;
+	    i2c107 = &i2c107;
+	    i2c108 = &i2c108;
+	    i2c109 = &i2c109;
+	    i2c110 = &i2c110;
+	    i2c111 = &i2c111;
+	    i2c112 = &i2c112;
+	    i2c113 = &i2c113;
+	    i2c114 = &i2c114;
+	    i2c115 = &i2c115;
+	    i2c116 = &i2c116;
+	    i2c117 = &i2c117;
+	    i2c118 = &i2c118;
+	    i2c119 = &i2c119;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+&gpio {
+	i2cmux_pins_i: i2cmux-pins-i {
+	       pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19",
+		      "GPIO_20", "GPIO_22", "GPIO_36", "GPIO_35",
+		      "GPIO_50", "GPIO_51", "GPIO_56", "GPIO_57";
+		function = "twi_scl_m";
+		output-low;
+	};
+	i2cmux_0: i2cmux-0 {
+		pins = "GPIO_16";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_1: i2cmux-1 {
+		pins = "GPIO_17";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_2: i2cmux-2 {
+		pins = "GPIO_18";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_3: i2cmux-3 {
+		pins = "GPIO_19";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_4: i2cmux-4 {
+		pins = "GPIO_20";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_5: i2cmux-5 {
+		pins = "GPIO_22";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_6: i2cmux-6 {
+		pins = "GPIO_36";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_7: i2cmux-7 {
+		pins = "GPIO_35";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_8: i2cmux-8 {
+		pins = "GPIO_50";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_9: i2cmux-9 {
+		pins = "GPIO_51";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_10: i2cmux-10 {
+		pins = "GPIO_56";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_11: i2cmux-11 {
+		pins = "GPIO_57";
+		function = "twi_scl_m";
+		output-high;
+	};
+};
+
+&axi {
+	i2c0_imux: i2c0-imux@0 {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+	};
+	i2c0_emux: i2c0-emux@0 {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+	};
+};
+
+&i2c0_imux {
+	pinctrl-names =
+		"i2c100", "i2c101", "i2c102", "i2c103",
+		"i2c104", "i2c105", "i2c106", "i2c107",
+		"i2c108", "i2c109", "i2c110", "i2c111", "idle";
+	pinctrl-0 = <&i2cmux_0>;
+	pinctrl-1 = <&i2cmux_1>;
+	pinctrl-2 = <&i2cmux_2>;
+	pinctrl-3 = <&i2cmux_3>;
+	pinctrl-4 = <&i2cmux_4>;
+	pinctrl-5 = <&i2cmux_5>;
+	pinctrl-6 = <&i2cmux_6>;
+	pinctrl-7 = <&i2cmux_7>;
+	pinctrl-8 = <&i2cmux_8>;
+	pinctrl-9 = <&i2cmux_9>;
+	pinctrl-10 = <&i2cmux_10>;
+	pinctrl-11 = <&i2cmux_11>;
+	pinctrl-12 = <&i2cmux_pins_i>;
+	i2c100: i2c_sfp1 {
+		reg = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c101: i2c_sfp2 {
+		reg = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c102: i2c_sfp3 {
+		reg = <0x2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c103: i2c_sfp4 {
+		reg = <0x3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c104: i2c_sfp5 {
+		reg = <0x4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c105: i2c_sfp6 {
+		reg = <0x5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c106: i2c_sfp7 {
+		reg = <0x6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c107: i2c_sfp8 {
+		reg = <0x7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c108: i2c_sfp9 {
+		reg = <0x8>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c109: i2c_sfp10 {
+		reg = <0x9>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c110: i2c_sfp11 {
+		reg = <0xa>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c111: i2c_sfp12 {
+		reg = <0xb>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&i2c0_emux {
+	mux-gpios = <&gpio 55 GPIO_ACTIVE_HIGH
+		     &gpio 60 GPIO_ACTIVE_HIGH
+		     &gpio 61 GPIO_ACTIVE_HIGH
+		     &gpio 54 GPIO_ACTIVE_HIGH>;
+	idle-state = <0x8>;
+	i2c112: i2c_sfp13 {
+		reg = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c113: i2c_sfp14 {
+		reg = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c114: i2c_sfp15 {
+		reg = <0x2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c115: i2c_sfp16 {
+		reg = <0x3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c116: i2c_sfp17 {
+		reg = <0x4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c117: i2c_sfp18 {
+		reg = <0x5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c118: i2c_sfp19 {
+		reg = <0x6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c119: i2c_sfp20 {
+		reg = <0x7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts
new file mode 100644
index 000000000000..10081a66961b
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb134_board.dtsi"
+
+/ {
+	model = "Sparx5 PCB134 Reference Board (eMMC enabled)";
+	compatible = "microchip,sparx5-pcb134", "microchip,sparx5";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x10000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb135.dts
new file mode 100644
index 000000000000..20e409a9be19
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb135_board.dtsi"
+
+/ {
+	model = "Sparx5 PCB135 Reference Board (NAND)";
+	compatible = "microchip,sparx5-pcb135", "microchip,sparx5";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x10000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
new file mode 100644
index 000000000000..d71f11a10b3d
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb_common.dtsi"
+
+/{
+	aliases {
+	    i2c0   = &i2c0;
+	    i2c152 = &i2c152;
+	    i2c153 = &i2c153;
+	    i2c154 = &i2c154;
+	    i2c155 = &i2c155;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+&gpio {
+	i2cmux_pins_i: i2cmux-pins-i {
+	       pins = "GPIO_35", "GPIO_36",
+		      "GPIO_50", "GPIO_51";
+		function = "twi_scl_m";
+		output-low;
+	};
+	i2cmux_s29: i2cmux-0 {
+		pins = "GPIO_35";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_s30: i2cmux-1 {
+		pins = "GPIO_36";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_s31: i2cmux-2 {
+		pins = "GPIO_50";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_s32: i2cmux-3 {
+		pins = "GPIO_51";
+		function = "twi_scl_m";
+		output-high;
+	};
+};
+
+&axi {
+	i2c0_imux: i2c0-imux@0 {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+	};
+};
+
+&i2c0_imux {
+	pinctrl-names =
+		"i2c152", "i2c153", "i2c154", "i2c155",
+		"idle";
+	pinctrl-0 = <&i2cmux_s29>;
+	pinctrl-1 = <&i2cmux_s30>;
+	pinctrl-2 = <&i2cmux_s31>;
+	pinctrl-3 = <&i2cmux_s32>;
+	pinctrl-4 = <&i2cmux_pins_i>;
+	i2c152: i2c_sfp1 {
+		reg = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c153: i2c_sfp2 {
+		reg = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c154: i2c_sfp3 {
+		reg = <0x2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c155: i2c_sfp4 {
+		reg = <0x3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts
new file mode 100644
index 000000000000..741f0e12260e
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb135_board.dtsi"
+
+/ {
+	model = "Sparx5 PCB135 Reference Board (eMMC enabled)";
+	compatible = "microchip,sparx5-pcb135", "microchip,sparx5";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x10000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
new file mode 100644
index 000000000000..9d1a082de3e2
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5.dtsi"
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/include/dt-bindings/clock/microchip,sparx5.h b/include/dt-bindings/clock/microchip,sparx5.h
new file mode 100644
index 000000000000..4b04dabacec2
--- /dev/null
+++ b/include/dt-bindings/clock/microchip,sparx5.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2019 Microchip Inc.
+ *
+ * Author: Lars Povlsen <lars.povlsen@microchip.com>
+ */
+
+#ifndef _DT_BINDINGS_CLK_SPARX5_H
+#define _DT_BINDINGS_CLK_SPARX5_H
+
+#define CLK_ID_CORE	0
+#define CLK_ID_DDR	1
+#define CLK_ID_CPU2	2
+#define CLK_ID_ARM2	3
+#define CLK_ID_AUX1	4
+#define CLK_ID_AUX2	5
+#define CLK_ID_AUX3	6
+#define CLK_ID_AUX4	7
+#define CLK_ID_SYNCE	8
+
+#define N_CLOCKS	9
+
+#endif