dt-bindings: arm: drop unneeded quotes and use absolute /schemas path

Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.  Also absolute path
starting with /schemas is preferred.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230609140754.65158-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>

3 files changed, 15 insertions, 15 deletions

diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
index 09c319f803ba..cdd65881fcdd 100644
--- a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
@@ -122,14 +122,14 @@ properties:
   arm,vexpress,position:
     description: When daughterboards are stacked on one site, their position
       in the stack be be described this attribute.
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 3
 
   arm,vexpress,dcc:
     description: When describing tiles consisting of more than one DCC, its
       number can be specified with this attribute.
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 3
 
@@ -180,13 +180,13 @@ patternProperties:
               - const: simple-bus
           arm,v2m-memory-map:
             description: This describes the memory map type.
-            $ref: '/schemas/types.yaml#/definitions/string'
+            $ref: /schemas/types.yaml#/definitions/string
             enum:
               - rs1
               - rs2
 
           arm,hbi:
-            $ref: '/schemas/types.yaml#/definitions/uint32'
+            $ref: /schemas/types.yaml#/definitions/uint32
             description: This indicates the ARM HBI (Hardware Board ID), this is
               ARM's unique board model ID, visible on the PCB's silkscreen.
 
@@ -197,7 +197,7 @@ patternProperties:
               property, describing the physical location of the children nodes.
               0 means motherboard site, while 1 and 2 are daughterboard sites, and
               0xf means "sisterboard" which is the site containing the main CPU tile.
-            $ref: '/schemas/types.yaml#/definitions/uint32'
+            $ref: /schemas/types.yaml#/definitions/uint32
             minimum: 0
             maximum: 15
 
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 64b58238e3a1..9e6a45eea4e5 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -197,7 +197,7 @@ properties:
       - qcom,scorpion
 
   enable-method:
-    $ref: '/schemas/types.yaml#/definitions/string'
+    $ref: /schemas/types.yaml#/definitions/string
     oneOf:
       # On ARM v8 64-bit this property is required
       - enum:
@@ -246,8 +246,8 @@ properties:
 
   cpu-release-addr:
     oneOf:
-      - $ref: '/schemas/types.yaml#/definitions/uint32'
-      - $ref: '/schemas/types.yaml#/definitions/uint64'
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - $ref: /schemas/types.yaml#/definitions/uint64
     description:
       The DT specification defines this as 64-bit always, but some 32-bit Arm
       systems have used a 32-bit value which must be supported.
@@ -255,7 +255,7 @@ properties:
         property value of "spin-table".
 
   cpu-idle-states:
-    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
       maxItems: 1
     description: |
@@ -271,7 +271,7 @@ properties:
   cci-control-port: true
 
   dynamic-power-coefficient:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       A u32 value that represents the running time dynamic
       power coefficient in units of uW/MHz/V^2. The
@@ -308,7 +308,7 @@ properties:
       PM domain provider, must be "psci".
 
   qcom,saw:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: |
       Specifies the SAW* node associated with this CPU.
 
@@ -318,7 +318,7 @@ properties:
       * arm/msm/qcom,saw2.txt
 
   qcom,acc:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: |
       Specifies the ACC* node associated with this CPU.
 
@@ -329,7 +329,7 @@ properties:
       * arm/msm/qcom,kpss-acc.txt
 
   rockchip,pmu:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: |
       Specifies the syscon node controlling the cpu core power domains.
 
@@ -339,7 +339,7 @@ properties:
       the cpu-core power-domains.
 
   secondary-boot-reg:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       Required for systems that have an "enable-method" property value of
       "brcm,bcm11351-cpu-method", "brcm,bcm23550" or "brcm,bcm-nsp-smp".
diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml
index 3a2c908ff282..0c5381e081bd 100644
--- a/Documentation/devicetree/bindings/arm/psci.yaml
+++ b/Documentation/devicetree/bindings/arm/psci.yaml
@@ -100,7 +100,7 @@ properties:
 
 patternProperties:
   "^power-domain-":
-    $ref: "../power/power-domain.yaml#"
+    $ref: /schemas/power/power-domain.yaml#
 
     type: object
     description: |